[UTC 2018-12-10 17:33:41] 17:33:42 Received message from Master: op=Log open serial=46482 17:33:42 Log file open: Observatory C:\PKZPrograms\Logs\20181209 \ PKZ20181210173342_Observatory.txt 17:33:42 Previous log file: 17:33:46 Received message from Master: op=Log directory change serial=46484 17:33:46 Log file directory changed from C:\PKZPrograms\Logs\20181209 to C:\PKZPrograms\Logs\20181210 17:33:46 Log file name is PKZ20181210173346_Observatory.txt [UTC 2018-12-10 17:35:54] 17:43:46 No messages received for 10 min. 6313 sent since last one of these. 17:43:46 MsgArea H: nextMessageSerial=46492 startMsgs=68 nextFree=54672 maxMsg=65468 17:43:46 MsgArea Q: Master=-1:-1 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:43:46 MsgArea S: 17:45:29 Received message from Master: op=Identify serial=46492 17:55:29 No messages received for 10 min. 1 sent since last one of these. 17:55:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 17:55:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:55:29 MsgArea S: [UTC 2018-12-10 17:55:54] 18:05:29 No messages received for 10 min. 0 sent since last one of these. 18:05:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 18:05:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:05:29 MsgArea S: 18:15:29 No messages received for 10 min. 0 sent since last one of these. 18:15:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 18:15:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:15:29 MsgArea S: [UTC 2018-12-10 18:15:54] 18:25:29 No messages received for 10 min. 0 sent since last one of these. 18:25:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 18:25:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:25:29 MsgArea S: 18:35:29 No messages received for 10 min. 0 sent since last one of these. 18:35:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 18:35:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:35:29 MsgArea S: [UTC 2018-12-10 18:35:54] 18:45:29 No messages received for 10 min. 0 sent since last one of these. 18:45:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 18:45:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:45:29 MsgArea S: 18:55:29 No messages received for 10 min. 0 sent since last one of these. 18:55:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 18:55:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:55:29 MsgArea S: [UTC 2018-12-10 18:55:54] 19:05:29 No messages received for 10 min. 0 sent since last one of these. 19:05:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 19:05:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:05:29 MsgArea S: 19:15:29 No messages received for 10 min. 0 sent since last one of these. 19:15:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 19:15:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:15:29 MsgArea S: [UTC 2018-12-10 19:15:54] 19:25:29 No messages received for 10 min. 0 sent since last one of these. 19:25:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 19:25:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:25:29 MsgArea S: 19:35:29 No messages received for 10 min. 0 sent since last one of these. 19:35:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 19:35:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:35:29 MsgArea S: [UTC 2018-12-10 19:35:54] 19:45:29 No messages received for 10 min. 0 sent since last one of these. 19:45:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 19:45:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:45:29 MsgArea S: 19:55:29 No messages received for 10 min. 0 sent since last one of these. 19:55:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 19:55:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:55:29 MsgArea S: [UTC 2018-12-10 19:55:54] 20:05:29 No messages received for 10 min. 0 sent since last one of these. 20:05:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 20:05:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:05:29 MsgArea S: 20:15:29 No messages received for 10 min. 0 sent since last one of these. 20:15:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 20:15:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:15:29 MsgArea S: [UTC 2018-12-10 20:15:54] 20:25:29 No messages received for 10 min. 0 sent since last one of these. 20:25:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 20:25:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:25:29 MsgArea S: 20:35:29 No messages received for 10 min. 0 sent since last one of these. 20:35:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 20:35:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:35:29 MsgArea S: [UTC 2018-12-10 20:35:54] 20:45:29 No messages received for 10 min. 0 sent since last one of these. 20:45:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 20:45:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:45:29 MsgArea S: 20:55:29 No messages received for 10 min. 0 sent since last one of these. 20:55:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 20:55:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:55:29 MsgArea S: [UTC 2018-12-10 20:55:54] 21:05:29 No messages received for 10 min. 0 sent since last one of these. 21:05:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 21:05:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:05:29 MsgArea S: 21:15:29 No messages received for 10 min. 0 sent since last one of these. 21:15:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 21:15:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:15:29 MsgArea S: [UTC 2018-12-10 21:15:54] 21:25:29 No messages received for 10 min. 0 sent since last one of these. 21:25:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 21:25:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:25:29 MsgArea S: 21:35:29 No messages received for 10 min. 0 sent since last one of these. 21:35:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 21:35:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:35:29 MsgArea S: [UTC 2018-12-10 21:35:54] 21:45:29 No messages received for 10 min. 0 sent since last one of these. 21:45:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 21:45:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:45:29 MsgArea S: 21:55:29 No messages received for 10 min. 0 sent since last one of these. 21:55:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 21:55:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:55:29 MsgArea S: [UTC 2018-12-10 21:55:54] 22:05:29 No messages received for 10 min. 0 sent since last one of these. 22:05:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 22:05:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:05:29 MsgArea S: 22:15:29 No messages received for 10 min. 0 sent since last one of these. 22:15:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 22:15:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:15:29 MsgArea S: [UTC 2018-12-10 22:15:54] 22:25:29 No messages received for 10 min. 0 sent since last one of these. 22:25:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 22:25:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:25:29 MsgArea S: 22:35:29 No messages received for 10 min. 0 sent since last one of these. 22:35:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 22:35:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:35:29 MsgArea S: [UTC 2018-12-10 22:35:54] 22:45:29 No messages received for 10 min. 0 sent since last one of these. 22:45:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 22:45:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:45:29 MsgArea S: 22:55:29 No messages received for 10 min. 0 sent since last one of these. 22:55:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 22:55:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:55:29 MsgArea S: [UTC 2018-12-10 22:55:54] 23:05:29 No messages received for 10 min. 0 sent since last one of these. 23:05:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 23:05:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:05:29 MsgArea S: 23:15:29 No messages received for 10 min. 0 sent since last one of these. 23:15:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 23:15:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:15:29 MsgArea S: [UTC 2018-12-10 23:15:54] 23:25:29 No messages received for 10 min. 0 sent since last one of these. 23:25:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 23:25:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:25:29 MsgArea S: 23:35:29 No messages received for 10 min. 0 sent since last one of these. 23:35:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 23:35:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:35:29 MsgArea S: [UTC 2018-12-10 23:35:54] 23:45:29 No messages received for 10 min. 0 sent since last one of these. 23:45:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 23:45:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:45:29 MsgArea S: 23:55:29 No messages received for 10 min. 0 sent since last one of these. 23:55:29 MsgArea H: nextMessageSerial=46495 startMsgs=68 nextFree=55488 maxMsg=65468 23:55:29 MsgArea Q: Master=54876:55284 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:55:29 MsgArea S: [UTC 2018-12-10 23:55:54] 00:00:03 Received message from Master: op=PointingHead serial=46496 00:00:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:00:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:00:03 Point started: ret=0 00:00:03 point_skyscan result=0 00:00:04 Check angles 00:00:04 SkyScan query 00:00:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:00:05 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 00:00:05 Message to Master queued w/err=0: serial=46496 error=0 00:00:10 Received message from Master: op=Filter serial=46497 00:00:10 Color wheel filter change from 2 to 2 00:00:10 FLIGetFilterPos err=0 currentPosition=2 00:00:10 FLIGetStepsRemaining err=0 RemainingSteps=0 00:00:10 Filter is already there-color wheel unchanged 00:00:10 Received message from Master: op=Shutter serial=46498 00:00:10 Shutter LASER close 00:00:11 Received message from Camera: op=State serial=46500 00:00:11 GetSingleValue result=40 Value=cccccccc 00:00:11 SkyScan query 00:00:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:00:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:00:12 Parameters OK 00:00:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:00:12 Set A/D data flow result=40 00:00:12 Set A/D channel type result=40 00:00:12 Set A/D encoding result=40 00:00:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:00:12 Set channel filter=0.000000e+000 result=40 00:00:12 Config A/D Result=40 00:00:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:00:12 Get A/D filter: -9.255963e+061 result=40 00:00:12 Get A/D value=-858993460 result=40 00:00:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:00:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:00:12 Parameters OK 00:00:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:00:12 Set A/D data flow result=40 00:00:12 Set A/D channel type result=40 00:00:12 Set A/D encoding result=40 00:00:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:00:12 Set channel filter=0.000000e+000 result=40 00:00:12 Config A/D Result=40 00:00:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:00:12 Get A/D filter: -9.255963e+061 result=40 00:00:12 Get A/D value=-858993460 result=40 00:00:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:00:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:00:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:00:12 Aux= 00:00:12 Message to Camera, serial 46500 queued 00:00:18 Received message from Master: op=PointingHead serial=46511 00:00:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:00:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:00:18 Point started: ret=0 00:00:18 point_skyscan result=0 00:00:19 Check angles 00:00:19 SkyScan query 00:00:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:00:19 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 00:00:19 Message to Master queued w/err=0: serial=46511 error=0 00:00:24 Received message from Master: op=Filter serial=46512 00:00:24 Color wheel filter change from 2 to 2 00:00:24 FLIGetFilterPos err=0 currentPosition=2 00:00:24 FLIGetStepsRemaining err=0 RemainingSteps=0 00:00:24 Filter is already there-color wheel unchanged 00:00:24 Received message from Master: op=Shutter serial=46513 00:00:24 Shutter LASER close 00:00:25 Received message from Camera: op=State serial=46515 00:00:25 GetSingleValue result=40 Value=cccccccc 00:00:25 SkyScan query 00:00:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:00:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:00:25 Parameters OK 00:00:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:00:25 Set A/D data flow result=40 00:00:25 Set A/D channel type result=40 00:00:25 Set A/D encoding result=40 00:00:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:00:25 Set channel filter=0.000000e+000 result=40 00:00:25 Config A/D Result=40 00:00:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:00:25 Get A/D filter: -9.255963e+061 result=40 00:00:25 Get A/D value=-858993460 result=40 00:00:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:00:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:00:25 Parameters OK 00:00:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:00:25 Set A/D data flow result=40 00:00:25 Set A/D channel type result=40 00:00:25 Set A/D encoding result=40 00:00:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:00:25 Set channel filter=0.000000e+000 result=40 00:00:25 Config A/D Result=40 00:00:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:00:25 Get A/D filter: -9.255963e+061 result=40 00:00:25 Get A/D value=-858993460 result=40 00:00:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:00:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:00:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:00:25 Aux= 00:00:25 Message to Camera, serial 46515 queued 00:01:01 Received message from Master: op=PointingHead serial=46527 00:01:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:01:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:01:01 Point started: ret=0 00:01:01 point_skyscan result=0 00:01:02 Check angles 00:01:02 SkyScan query 00:01:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:01:03 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 00:01:03 Message to Master queued w/err=0: serial=46527 error=0 00:01:08 Received message from Master: op=Filter serial=46528 00:01:08 Color wheel filter change from 2 to 2 00:01:08 FLIGetFilterPos err=0 currentPosition=2 00:01:08 FLIGetStepsRemaining err=0 RemainingSteps=0 00:01:08 Filter is already there-color wheel unchanged 00:01:08 Received message from Master: op=Shutter serial=46529 00:01:08 Shutter LASER open 00:01:08 Received message from Camera: op=State serial=46531 00:01:08 GetSingleValue result=40 Value=cccccccc 00:01:08 SkyScan query 00:01:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:01:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:01:09 Parameters OK 00:01:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:01:09 Set A/D data flow result=40 00:01:09 Set A/D channel type result=40 00:01:09 Set A/D encoding result=40 00:01:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:01:09 Set channel filter=0.000000e+000 result=40 00:01:09 Config A/D Result=40 00:01:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:01:09 Get A/D filter: -9.255963e+061 result=40 00:01:09 Get A/D value=-858993460 result=40 00:01:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:01:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:01:09 Parameters OK 00:01:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:01:09 Set A/D data flow result=40 00:01:09 Set A/D channel type result=40 00:01:09 Set A/D encoding result=40 00:01:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:01:09 Set channel filter=0.000000e+000 result=40 00:01:09 Config A/D Result=40 00:01:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:01:09 Get A/D filter: -9.255963e+061 result=40 00:01:09 Get A/D value=-858993460 result=40 00:01:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:01:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:01:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:01:09 Aux= 00:01:09 Message to Camera, serial 46531 queued 00:01:17 Received message from Master: op=Shutter serial=46541 00:01:17 Shutter LASER close 00:01:17 Received message from Master: op=PointingHead serial=46545 00:01:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:01:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:01:18 Point started: ret=0 00:01:18 point_skyscan result=0 00:01:19 Check angles 00:01:19 SkyScan query 00:01:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:01:19 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 00:01:19 Message to Master queued w/err=0: serial=46545 error=0 00:01:24 Received message from Master: op=Filter serial=46546 00:01:24 Color wheel filter change from 2 to 2 00:01:24 FLIGetFilterPos err=0 currentPosition=2 00:01:24 FLIGetStepsRemaining err=0 RemainingSteps=0 00:01:24 Filter is already there-color wheel unchanged 00:01:24 Received message from Master: op=Shutter serial=46547 00:01:24 Shutter LASER close 00:01:25 Received message from Camera: op=State serial=46549 00:01:25 GetSingleValue result=40 Value=cccccccc 00:01:25 SkyScan query 00:01:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:01:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:01:25 Parameters OK 00:01:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:01:25 Set A/D data flow result=40 00:01:25 Set A/D channel type result=40 00:01:25 Set A/D encoding result=40 00:01:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:01:25 Set channel filter=0.000000e+000 result=40 00:01:25 Config A/D Result=40 00:01:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:01:25 Get A/D filter: -9.255963e+061 result=40 00:01:25 Get A/D value=-858993460 result=40 00:01:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:01:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:01:25 Parameters OK 00:01:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:01:25 Set A/D data flow result=40 00:01:25 Set A/D channel type result=40 00:01:25 Set A/D encoding result=40 00:01:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:01:25 Set channel filter=0.000000e+000 result=40 00:01:25 Config A/D Result=40 00:01:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:01:25 Get A/D filter: -9.255963e+061 result=40 00:01:25 Get A/D value=-858993460 result=40 00:01:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:01:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:01:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:01:25 Aux= 00:01:25 Message to Camera, serial 46549 queued 00:01:33 Received message from Master: op=PointingHead serial=46561 00:01:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:01:33 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:01:33 Point started: ret=0 00:01:33 point_skyscan result=0 00:01:34 Check angles 00:01:34 SkyScan query 00:01:35 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.535<-21569 Statuses=0009 0009 00:01:35 Msec=0 True Az=135.72 Ze=-143.535 Az status=0009 Ze status=0009 00:01:35 Check angles 00:01:35 SkyScan query 00:01:35 SkyScan query done: ret=0 az=153.18<-10212 ze=-122.58<-20172 Statuses=0009 0009 00:01:35 Msec=750 True Az=153.18 Ze=-122.58 Az status=0009 Ze status=0009 00:01:36 Check angles 00:01:36 SkyScan query 00:01:36 SkyScan query done: ret=0 az=170.67<-11378 ze=-101.625<-18775 Statuses=0009 0009 00:01:36 Msec=1500 True Az=170.67 Ze=-101.625 Az status=0009 Ze status=0009 00:01:36 Check angles 00:01:36 SkyScan query 00:01:37 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.625<-17375 Statuses=0008 0009 00:01:37 Msec=2250 True Az=176.025 Ze=-80.625 Az status=0008 Ze status=0009 00:01:37 Check angles 00:01:37 SkyScan query 00:01:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.685<-15979 Statuses=0008 0009 00:01:38 Msec=3000 True Az=175.995 Ze=-59.685 Az status=0008 Ze status=0009 00:01:38 Check angles 00:01:38 SkyScan query 00:01:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:01:38 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:01:38 Message to Master queued w/err=0: serial=46561 error=0 00:01:43 Received message from Master: op=Filter serial=46562 00:01:43 Color wheel filter change from 2 to 0 00:01:43 FLIGetFilterPos err=0 currentPosition=2 00:01:43 FLIGetStepsRemaining err=0 RemainingSteps=0 00:01:50 FLISetFilterPos err=0 rqPosition=0 00:01:50 FLIGetStepsRemaining err=0 RemainingSteps=0 00:01:50 Check after 0.00 sec for filter wheel DIn/CWh=0 00:01:50 FLIGetFilterPos err=0 currentPosition=0 00:01:50 FLIGetStepsRemaining err=0 RemainingSteps=0 00:01:50 Received message from Master: op=Shutter serial=46563 00:01:50 Shutter LASER close 00:01:50 Received message from Camera: op=State serial=46565 00:01:50 GetSingleValue result=40 Value=cccccccc 00:01:50 SkyScan query 00:01:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:01:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:01:51 Parameters OK 00:01:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:01:51 Set A/D data flow result=40 00:01:51 Set A/D channel type result=40 00:01:51 Set A/D encoding result=40 00:01:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:01:51 Set channel filter=0.000000e+000 result=40 00:01:51 Config A/D Result=40 00:01:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:01:51 Get A/D filter: -9.255963e+061 result=40 00:01:51 Get A/D value=-858993460 result=40 00:01:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:01:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:01:51 Parameters OK 00:01:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:01:51 Set A/D data flow result=40 00:01:51 Set A/D channel type result=40 00:01:51 Set A/D encoding result=40 00:01:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:01:51 Set channel filter=0.000000e+000 result=40 00:01:51 Config A/D Result=40 00:01:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:01:51 Get A/D filter: -9.255963e+061 result=40 00:01:51 Get A/D value=-858993460 result=40 00:01:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:01:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:01:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:01:51 Aux= 00:01:51 Message to Camera, serial 46565 queued 00:02:27 Received message from Master: op=PointingHead serial=46578 00:02:27 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:02:27 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:02:28 Point started: ret=0 00:02:28 point_skyscan result=0 00:02:28 Check angles 00:02:28 SkyScan query 00:02:29 SkyScan query done: ret=0 az=153.12<-10208 ze=-22.02<-13468 Statuses=0009 0009 00:02:29 Msec=0 True Az=153.12 Ze=-22.02 Az status=0009 Ze status=0009 00:02:29 Check angles 00:02:29 SkyScan query 00:02:30 SkyScan query done: ret=0 az=135.285<-9019 ze=-0.615<-12041 Statuses=0009 0009 00:02:30 Msec=750 True Az=135.285 Ze=-0.615 Az status=0009 Ze status=0009 00:02:30 Check angles 00:02:30 SkyScan query 00:02:31 SkyScan query done: ret=0 az=117.345<-7823 ze=20.73<-10618 Statuses=0009 0009 00:02:31 Msec=1500 True Az=117.345 Ze=20.73 Az status=0009 Ze status=0009 00:02:31 Check angles 00:02:31 SkyScan query 00:02:31 SkyScan query done: ret=0 az=99.99<-6666 ze=41.67<-9222 Statuses=0009 0009 00:02:31 Msec=2250 True Az=99.99 Ze=41.67 Az status=0009 Ze status=0009 00:02:32 Check angles 00:02:32 SkyScan query 00:02:32 SkyScan query done: ret=0 az=86.07<-5738 ze=51.57<-8562 Statuses=0009 0008 00:02:32 Msec=3000 True Az=86.07 Ze=51.57 Az status=0009 Ze status=0008 00:02:32 Check angles 00:02:32 SkyScan query 00:02:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:02:33 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 00:02:33 Message to Master queued w/err=0: serial=46578 error=0 00:02:38 Received message from Master: op=Filter serial=46579 00:02:38 Color wheel filter change from 0 to 0 00:02:38 FLIGetFilterPos err=0 currentPosition=0 00:02:38 FLIGetStepsRemaining err=0 RemainingSteps=0 00:02:38 Filter is already there-color wheel unchanged 00:02:38 Received message from Master: op=Shutter serial=46580 00:02:38 Shutter LASER close 00:02:38 Received message from Camera: op=State serial=46582 00:02:38 GetSingleValue result=40 Value=cccccccc 00:02:38 SkyScan query 00:02:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:02:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:02:39 Parameters OK 00:02:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:02:39 Set A/D data flow result=40 00:02:39 Set A/D channel type result=40 00:02:39 Set A/D encoding result=40 00:02:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:02:39 Set channel filter=0.000000e+000 result=40 00:02:39 Config A/D Result=40 00:02:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:02:39 Get A/D filter: -9.255963e+061 result=40 00:02:39 Get A/D value=-858993460 result=40 00:02:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:02:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:02:39 Parameters OK 00:02:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:02:39 Set A/D data flow result=40 00:02:39 Set A/D channel type result=40 00:02:39 Set A/D encoding result=40 00:02:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:02:39 Set channel filter=0.000000e+000 result=40 00:02:39 Config A/D Result=40 00:02:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:02:39 Get A/D filter: -9.255963e+061 result=40 00:02:39 Get A/D value=-858993460 result=40 00:02:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:02:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:02:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:02:39 Aux= 00:02:39 Message to Camera, serial 46582 queued 00:03:15 Received message from Master: op=PointingHead serial=46595 00:03:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:03:15 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:03:16 Point started: ret=0 00:03:16 point_skyscan result=0 00:03:17 Check angles 00:03:17 SkyScan query 00:03:17 SkyScan query done: ret=0 az=109.305<-7287 ze=38.49<-9434 Statuses=0009 0008 00:03:17 Msec=0 True Az=109.305 Ze=38.49 Az status=0009 Ze status=0008 00:03:17 Check angles 00:03:17 SkyScan query 00:03:18 SkyScan query done: ret=0 az=126.765<-8451 ze=38.505<-9433 Statuses=0009 0008 00:03:18 Msec=750 True Az=126.765 Ze=38.505 Az status=0009 Ze status=0008 00:03:18 Check angles 00:03:18 SkyScan query 00:03:19 SkyScan query done: ret=0 az=144.6<-9640 ze=38.505<-9433 Statuses=0009 0008 00:03:19 Msec=1500 True Az=144.6 Ze=38.505 Az status=0009 Ze status=0008 00:03:19 Check angles 00:03:19 SkyScan query 00:03:19 SkyScan query done: ret=0 az=161.955<-10797 ze=38.505<-9433 Statuses=0009 0008 00:03:19 Msec=2250 True Az=161.955 Ze=38.505 Az status=0009 Ze status=0008 00:03:20 Check angles 00:03:20 SkyScan query 00:03:20 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 00:03:20 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 00:03:20 Check angles 00:03:20 SkyScan query 00:03:21 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:03:21 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:03:21 Message to Master queued w/err=0: serial=46595 error=0 00:03:26 Received message from Master: op=Filter serial=46596 00:03:26 Color wheel filter change from 0 to 0 00:03:26 FLIGetFilterPos err=0 currentPosition=0 00:03:26 FLIGetStepsRemaining err=0 RemainingSteps=0 00:03:26 Filter is already there-color wheel unchanged 00:03:26 Received message from Master: op=Shutter serial=46597 00:03:26 Shutter LASER close 00:03:26 Received message from Camera: op=State serial=46599 00:03:26 GetSingleValue result=40 Value=cccccccc 00:03:26 SkyScan query 00:03:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:03:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:03:27 Parameters OK 00:03:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:03:27 Set A/D data flow result=40 00:03:27 Set A/D channel type result=40 00:03:27 Set A/D encoding result=40 00:03:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:03:27 Set channel filter=0.000000e+000 result=40 00:03:27 Config A/D Result=40 00:03:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:03:27 Get A/D filter: -9.255963e+061 result=40 00:03:27 Get A/D value=-858993460 result=40 00:03:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:03:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:03:27 Parameters OK 00:03:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:03:27 Set A/D data flow result=40 00:03:27 Set A/D channel type result=40 00:03:27 Set A/D encoding result=40 00:03:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:03:27 Set channel filter=0.000000e+000 result=40 00:03:27 Config A/D Result=40 00:03:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:03:27 Get A/D filter: -9.255963e+061 result=40 00:03:27 Get A/D value=-858993460 result=40 00:03:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:03:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:03:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:03:27 Aux= 00:03:27 Message to Camera, serial 46599 queued 00:04:04 Received message from Master: op=PointingHead serial=46612 00:04:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:04:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:04:04 Point started: ret=0 00:04:04 point_skyscan result=0 00:04:05 Check angles 00:04:05 SkyScan query 00:04:05 SkyScan query done: ret=0 az=152.76<-10184 ze=8.535<-11431 Statuses=0009 0009 00:04:05 Msec=0 True Az=152.76 Ze=8.535 Az status=0009 Ze status=0009 00:04:05 Check angles 00:04:05 SkyScan query 00:04:06 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.435<-12829 Statuses=0009 0009 00:04:06 Msec=750 True Az=135.375 Ze=-12.435 Az status=0009 Ze status=0009 00:04:06 Check angles 00:04:06 SkyScan query 00:04:07 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.36<-14224 Statuses=0009 0009 00:04:07 Msec=1500 True Az=117.795 Ze=-33.36 Az status=0009 Ze status=0009 00:04:07 Check angles 00:04:07 SkyScan query 00:04:07 SkyScan query done: ret=0 az=100.305<-6687 ze=-51.54<-15436 Statuses=0009 0009 00:04:07 Msec=2250 True Az=100.305 Ze=-51.54 Az status=0009 Ze status=0009 00:04:08 Check angles 00:04:08 SkyScan query 00:04:08 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 00:04:08 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 00:04:08 Check angles 00:04:08 SkyScan query 00:04:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:04:09 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:04:09 Message to Master queued w/err=0: serial=46612 error=0 00:04:14 Received message from Master: op=Filter serial=46613 00:04:14 Color wheel filter change from 0 to 0 00:04:14 FLIGetFilterPos err=0 currentPosition=0 00:04:14 FLIGetStepsRemaining err=0 RemainingSteps=0 00:04:14 Filter is already there-color wheel unchanged 00:04:14 Received message from Master: op=Shutter serial=46614 00:04:14 Shutter LASER close 00:04:14 Received message from Camera: op=State serial=46616 00:04:14 GetSingleValue result=40 Value=cccccccc 00:04:14 SkyScan query 00:04:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:04:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:04:15 Parameters OK 00:04:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:04:15 Set A/D data flow result=40 00:04:15 Set A/D channel type result=40 00:04:15 Set A/D encoding result=40 00:04:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:04:15 Set channel filter=0.000000e+000 result=40 00:04:15 Config A/D Result=40 00:04:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:04:15 Get A/D filter: -9.255963e+061 result=40 00:04:15 Get A/D value=-858993460 result=40 00:04:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:04:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:04:15 Parameters OK 00:04:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:04:15 Set A/D data flow result=40 00:04:15 Set A/D channel type result=40 00:04:15 Set A/D encoding result=40 00:04:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:04:15 Set channel filter=0.000000e+000 result=40 00:04:15 Config A/D Result=40 00:04:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:04:15 Get A/D filter: -9.255963e+061 result=40 00:04:15 Get A/D value=-858993460 result=40 00:04:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:04:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:04:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:04:15 Aux= 00:04:15 Message to Camera, serial 46616 queued 00:04:52 Received message from Master: op=PointingHead serial=46629 00:04:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:04:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:04:52 Point started: ret=0 00:04:52 point_skyscan result=0 00:04:53 Check angles 00:04:53 SkyScan query 00:04:53 SkyScan query done: ret=0 az=108.78<-7252 ze=-81.12<-17408 Statuses=0009 0009 00:04:53 Msec=0 True Az=108.78 Ze=-81.12 Az status=0009 Ze status=0009 00:04:53 Check angles 00:04:53 SkyScan query 00:04:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.48<-18832 Statuses=0008 0009 00:04:54 Msec=750 True Az=112.995 Ze=-102.48 Az status=0008 Ze status=0009 00:04:54 Check angles 00:04:54 SkyScan query 00:04:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 00:04:55 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 00:04:55 Check angles 00:04:55 SkyScan query 00:04:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.405<-21627 Statuses=0008 0009 00:04:56 Msec=2250 True Az=112.995 Ze=-144.405 Az status=0008 Ze status=0009 00:04:56 Check angles 00:04:56 SkyScan query 00:04:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.345<-23023 Statuses=0008 0009 00:04:56 Msec=3000 True Az=112.995 Ze=-165.345 Az status=0008 Ze status=0009 00:04:56 Check angles 00:04:56 SkyScan query 00:04:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:04:57 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:04:57 Message to Master queued w/err=0: serial=46629 error=0 00:05:02 Received message from Master: op=Filter serial=46630 00:05:02 Color wheel filter change from 0 to 0 00:05:02 FLIGetFilterPos err=0 currentPosition=0 00:05:02 FLIGetStepsRemaining err=0 RemainingSteps=0 00:05:02 Filter is already there-color wheel unchanged 00:05:02 Received message from Master: op=Shutter serial=46631 00:05:02 Shutter LASER open 00:05:02 Received message from Camera: op=State serial=46633 00:05:02 GetSingleValue result=40 Value=cccccccc 00:05:02 SkyScan query 00:05:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:05:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:05:03 Parameters OK 00:05:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:05:03 Set A/D data flow result=40 00:05:03 Set A/D channel type result=40 00:05:03 Set A/D encoding result=40 00:05:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:05:03 Set channel filter=0.000000e+000 result=40 00:05:03 Config A/D Result=40 00:05:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:05:03 Get A/D filter: -9.255963e+061 result=40 00:05:03 Get A/D value=-858993460 result=40 00:05:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:05:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:05:03 Parameters OK 00:05:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:05:03 Set A/D data flow result=40 00:05:03 Set A/D channel type result=40 00:05:03 Set A/D encoding result=40 00:05:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:05:03 Set channel filter=0.000000e+000 result=40 00:05:03 Config A/D Result=40 00:05:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:05:03 Get A/D filter: -9.255963e+061 result=40 00:05:03 Get A/D value=-858993460 result=40 00:05:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:05:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:05:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:05:03 Aux= 00:05:03 Message to Camera, serial 46633 queued 00:05:11 Received message from Master: op=Shutter serial=46643 00:05:11 Shutter LASER close 00:05:12 Received message from Master: op=PointingHead serial=46647 00:05:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:05:12 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:05:12 Point started: ret=0 00:05:12 point_skyscan result=0 00:05:13 Check angles 00:05:13 SkyScan query 00:05:14 SkyScan query done: ret=0 az=90.12<-6008 ze=157.5<-1500 Statuses=0009 0009 00:05:14 Msec=0 True Az=90.12 Ze=157.5 Az status=0009 Ze status=0009 00:05:14 Check angles 00:05:14 SkyScan query 00:05:14 SkyScan query done: ret=0 az=72.69<-4846 ze=136.515<-2899 Statuses=0009 0009 00:05:14 Msec=750 True Az=72.69 Ze=136.515 Az status=0009 Ze status=0009 00:05:14 Check angles 00:05:14 SkyScan query 00:05:15 SkyScan query done: ret=0 az=55.185<-3679 ze=115.56<-4296 Statuses=0009 0009 00:05:15 Msec=1500 True Az=55.185 Ze=115.56 Az status=0009 Ze status=0009 00:05:15 Check angles 00:05:15 SkyScan query 00:05:16 SkyScan query done: ret=0 az=40.875<-2725 ze=94.65<-5690 Statuses=0009 0009 00:05:16 Msec=2250 True Az=40.875 Ze=94.65 Az status=0009 Ze status=0009 00:05:16 Check angles 00:05:16 SkyScan query 00:05:17 SkyScan query done: ret=0 az=40.995<-2733 ze=73.665<-7089 Statuses=0008 0009 00:05:17 Msec=3000 True Az=40.995 Ze=73.665 Az status=0008 Ze status=0009 00:05:17 Check angles 00:05:17 SkyScan query 00:05:17 SkyScan query done: ret=0 az=40.995<-2733 ze=53.01<-8466 Statuses=0008 0009 00:05:17 Msec=3750 True Az=40.995 Ze=53.01 Az status=0008 Ze status=0009 00:05:17 Check angles 00:05:17 SkyScan query 00:05:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:05:18 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:05:18 Message to Master queued w/err=0: serial=46647 error=0 00:05:23 Received message from Master: op=Filter serial=46648 00:05:23 Color wheel filter change from 0 to 0 00:05:23 FLIGetFilterPos err=0 currentPosition=0 00:05:23 FLIGetStepsRemaining err=0 RemainingSteps=0 00:05:23 Filter is already there-color wheel unchanged 00:05:23 Received message from Master: op=Shutter serial=46649 00:05:23 Shutter LASER close 00:05:23 Received message from Camera: op=State serial=46651 00:05:23 GetSingleValue result=40 Value=cccccccc 00:05:23 SkyScan query 00:05:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:05:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:05:24 Parameters OK 00:05:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:05:24 Set A/D data flow result=40 00:05:24 Set A/D channel type result=40 00:05:24 Set A/D encoding result=40 00:05:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:05:24 Set channel filter=0.000000e+000 result=40 00:05:24 Config A/D Result=40 00:05:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:05:24 Get A/D filter: -9.255963e+061 result=40 00:05:24 Get A/D value=-858993460 result=40 00:05:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:05:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:05:24 Parameters OK 00:05:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:05:24 Set A/D data flow result=40 00:05:24 Set A/D channel type result=40 00:05:24 Set A/D encoding result=40 00:05:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:05:24 Set channel filter=0.000000e+000 result=40 00:05:24 Config A/D Result=40 00:05:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:05:24 Get A/D filter: -9.255963e+061 result=40 00:05:24 Get A/D value=-858993460 result=40 00:05:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:05:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:05:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:05:24 Aux= 00:05:24 Message to Camera, serial 46651 queued 00:06:00 Received message from Master: op=PointingHead serial=46663 00:06:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:06:00 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:06:00 Point started: ret=0 00:06:00 point_skyscan result=0 00:06:01 Check angles 00:06:01 SkyScan query 00:06:02 SkyScan query done: ret=0 az=40.995<-2733 ze=21.765<-10549 Statuses=0008 0009 00:06:02 Msec=0 True Az=40.995 Ze=21.765 Az status=0008 Ze status=0009 00:06:02 Check angles 00:06:02 SkyScan query 00:06:02 SkyScan query done: ret=0 az=40.995<-2733 ze=0.345<-11977 Statuses=0008 0009 00:06:02 Msec=750 True Az=40.995 Ze=0.345 Az status=0008 Ze status=0009 00:06:03 Check angles 00:06:03 SkyScan query 00:06:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.58<-13372 Statuses=0008 0009 00:06:03 Msec=1500 True Az=40.995 Ze=-20.58 Az status=0008 Ze status=0009 00:06:03 Check angles 00:06:03 SkyScan query 00:06:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 00:06:04 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 00:06:04 Check angles 00:06:04 SkyScan query 00:06:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 00:06:05 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 00:06:05 Message to Master queued w/err=0: serial=46663 error=0 00:06:10 Received message from Master: op=Filter serial=46664 00:06:10 Color wheel filter change from 0 to 0 00:06:10 FLIGetFilterPos err=0 currentPosition=0 00:06:10 FLIGetStepsRemaining err=0 RemainingSteps=0 00:06:10 Filter is already there-color wheel unchanged 00:06:10 Received message from Master: op=Shutter serial=46665 00:06:10 Shutter LASER close 00:06:10 Received message from Camera: op=State serial=46667 00:06:10 GetSingleValue result=40 Value=cccccccc 00:06:10 SkyScan query 00:06:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:06:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:06:11 Parameters OK 00:06:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:06:11 Set A/D data flow result=40 00:06:11 Set A/D channel type result=40 00:06:11 Set A/D encoding result=40 00:06:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:06:11 Set channel filter=0.000000e+000 result=40 00:06:11 Config A/D Result=40 00:06:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:06:11 Get A/D filter: -9.255963e+061 result=40 00:06:11 Get A/D value=-858993460 result=40 00:06:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:06:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:06:11 Parameters OK 00:06:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:06:11 Set A/D data flow result=40 00:06:11 Set A/D channel type result=40 00:06:11 Set A/D encoding result=40 00:06:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:06:11 Set channel filter=0.000000e+000 result=40 00:06:11 Config A/D Result=40 00:06:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:06:11 Get A/D filter: -9.255963e+061 result=40 00:06:11 Get A/D value=-858993460 result=40 00:06:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:06:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:06:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:06:11 Aux= 00:06:11 Message to Camera, serial 46667 queued 00:06:47 Received message from Master: op=PointingHead serial=46680 00:06:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:06:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:06:48 Point started: ret=0 00:06:48 point_skyscan result=0 00:06:48 Check angles 00:06:48 SkyScan query 00:06:49 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.595<-16573 Statuses=0009 0009 00:06:49 Msec=0 True Az=64.17 Ze=-68.595 Az status=0009 Ze status=0009 00:06:49 Check angles 00:06:49 SkyScan query 00:06:50 SkyScan query done: ret=0 az=81.735<-5449 ze=-89.55<-17970 Statuses=0009 0009 00:06:50 Msec=750 True Az=81.735 Ze=-89.55 Az status=0009 Ze status=0009 00:06:50 Check angles 00:06:50 SkyScan query 00:06:51 SkyScan query done: ret=0 az=99.6<-6640 ze=-110.955<-19397 Statuses=0009 0009 00:06:51 Msec=1500 True Az=99.6 Ze=-110.955 Az status=0009 Ze status=0009 00:06:51 Check angles 00:06:51 SkyScan query 00:06:51 SkyScan query done: ret=0 az=117.075<-7805 ze=-131.865<-20791 Statuses=0009 0009 00:06:51 Msec=2250 True Az=117.075 Ze=-131.865 Az status=0009 Ze status=0009 00:06:51 Check angles 00:06:51 SkyScan query 00:06:52 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 00:06:52 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 00:06:52 Check angles 00:06:52 SkyScan query 00:06:53 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:06:53 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:06:53 Message to Master queued w/err=0: serial=46680 error=0 00:06:58 Received message from Master: op=Filter serial=46681 00:06:58 Color wheel filter change from 0 to 0 00:06:58 FLIGetFilterPos err=0 currentPosition=0 00:06:58 FLIGetStepsRemaining err=0 RemainingSteps=0 00:06:58 Filter is already there-color wheel unchanged 00:06:58 Received message from Master: op=Shutter serial=46682 00:06:58 Shutter LASER close 00:06:58 Received message from Camera: op=State serial=46684 00:06:58 GetSingleValue result=40 Value=cccccccc 00:06:58 SkyScan query 00:06:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:06:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:06:59 Parameters OK 00:06:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:06:59 Set A/D data flow result=40 00:06:59 Set A/D channel type result=40 00:06:59 Set A/D encoding result=40 00:06:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:06:59 Set channel filter=0.000000e+000 result=40 00:06:59 Config A/D Result=40 00:06:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:06:59 Get A/D filter: -9.255963e+061 result=40 00:06:59 Get A/D value=-858993460 result=40 00:06:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:06:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:06:59 Parameters OK 00:06:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:06:59 Set A/D data flow result=40 00:06:59 Set A/D channel type result=40 00:06:59 Set A/D encoding result=40 00:06:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:06:59 Set channel filter=0.000000e+000 result=40 00:06:59 Config A/D Result=40 00:06:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:06:59 Get A/D filter: -9.255963e+061 result=40 00:06:59 Get A/D value=-858993460 result=40 00:06:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:06:59 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:06:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:06:59 Aux= 00:06:59 Message to Camera, serial 46684 queued 00:07:35 Received message from Master: op=PointingHead serial=46697 00:07:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:07:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:07:36 Point started: ret=0 00:07:36 point_skyscan result=0 00:07:37 Check angles 00:07:37 SkyScan query 00:07:37 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 00:07:37 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 00:07:37 Check angles 00:07:37 SkyScan query 00:07:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:07:38 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:07:38 Message to Master queued w/err=0: serial=46697 error=0 00:07:43 Received message from Master: op=Filter serial=46698 00:07:43 Color wheel filter change from 0 to 0 00:07:43 FLIGetFilterPos err=0 currentPosition=0 00:07:43 FLIGetStepsRemaining err=0 RemainingSteps=0 00:07:43 Filter is already there-color wheel unchanged 00:07:43 Received message from Master: op=Shutter serial=46699 00:07:43 Shutter LASER open 00:07:43 Received message from Camera: op=State serial=46701 00:07:43 GetSingleValue result=40 Value=cccccccc 00:07:43 SkyScan query 00:07:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:07:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:07:44 Parameters OK 00:07:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:07:44 Set A/D data flow result=40 00:07:44 Set A/D channel type result=40 00:07:44 Set A/D encoding result=40 00:07:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:07:44 Set channel filter=0.000000e+000 result=40 00:07:44 Config A/D Result=40 00:07:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:07:44 Get A/D filter: -9.255963e+061 result=40 00:07:44 Get A/D value=-858993460 result=40 00:07:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:07:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:07:44 Parameters OK 00:07:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:07:44 Set A/D data flow result=40 00:07:44 Set A/D channel type result=40 00:07:44 Set A/D encoding result=40 00:07:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:07:44 Set channel filter=0.000000e+000 result=40 00:07:44 Config A/D Result=40 00:07:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:07:44 Get A/D filter: -9.255963e+061 result=40 00:07:44 Get A/D value=-858993460 result=40 00:07:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:07:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:07:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:07:44 Aux= 00:07:44 Message to Camera, serial 46701 queued 00:07:52 Received message from Master: op=Shutter serial=46711 00:07:52 Shutter LASER close 00:07:53 Received message from Master: op=PointingHead serial=46715 00:07:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:07:53 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:07:53 Point started: ret=0 00:07:53 point_skyscan result=0 00:07:54 Check angles 00:07:54 SkyScan query 00:07:54 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.325<-21555 Statuses=0009 0009 00:07:54 Msec=0 True Az=135.885 Ze=-143.325 Az status=0009 Ze status=0009 00:07:55 Check angles 00:07:55 SkyScan query 00:07:55 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.34<-20156 Statuses=0009 0009 00:07:55 Msec=750 True Az=153.36 Ze=-122.34 Az status=0009 Ze status=0009 00:07:55 Check angles 00:07:55 SkyScan query 00:07:56 SkyScan query done: ret=0 az=170.805<-11387 ze=-101.46<-18764 Statuses=0009 0009 00:07:56 Msec=1500 True Az=170.805 Ze=-101.46 Az status=0009 Ze status=0009 00:07:56 Check angles 00:07:56 SkyScan query 00:07:57 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.43<-17362 Statuses=0008 0009 00:07:57 Msec=2250 True Az=176.025 Ze=-80.43 Az status=0008 Ze status=0009 00:07:57 Check angles 00:07:57 SkyScan query 00:07:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.13<-15942 Statuses=0008 0009 00:07:57 Msec=3000 True Az=175.995 Ze=-59.13 Az status=0008 Ze status=0009 00:07:58 Check angles 00:07:58 SkyScan query 00:07:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:07:58 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:07:58 Message to Master queued w/err=0: serial=46715 error=0 00:08:03 Received message from Master: op=Filter serial=46716 00:08:03 Color wheel filter change from 0 to 0 00:08:03 FLIGetFilterPos err=0 currentPosition=0 00:08:03 FLIGetStepsRemaining err=0 RemainingSteps=0 00:08:03 Filter is already there-color wheel unchanged 00:08:03 Received message from Master: op=Shutter serial=46717 00:08:03 Shutter LASER close 00:08:04 Received message from Camera: op=State serial=46719 00:08:04 GetSingleValue result=40 Value=cccccccc 00:08:04 SkyScan query 00:08:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:08:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:08:04 Parameters OK 00:08:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:08:04 Set A/D data flow result=40 00:08:04 Set A/D channel type result=40 00:08:04 Set A/D encoding result=40 00:08:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:08:04 Set channel filter=0.000000e+000 result=40 00:08:04 Config A/D Result=40 00:08:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:08:04 Get A/D filter: -9.255963e+061 result=40 00:08:04 Get A/D value=-858993460 result=40 00:08:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:08:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:08:04 Parameters OK 00:08:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:08:04 Set A/D data flow result=40 00:08:04 Set A/D channel type result=40 00:08:04 Set A/D encoding result=40 00:08:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:08:04 Set channel filter=0.000000e+000 result=40 00:08:04 Config A/D Result=40 00:08:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:08:04 Get A/D filter: -9.255963e+061 result=40 00:08:04 Get A/D value=-858993460 result=40 00:08:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:08:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:08:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:08:04 Aux= 00:08:04 Message to Camera, serial 46719 queued 00:08:41 Received message from Master: op=PointingHead serial=46732 00:08:41 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:08:41 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:08:41 Point started: ret=0 00:08:41 point_skyscan result=0 00:08:42 Check angles 00:08:42 SkyScan query 00:08:43 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.9<-13460 Statuses=0009 0009 00:08:43 Msec=0 True Az=153.12 Ze=-21.9 Az status=0009 Ze status=0009 00:08:43 Check angles 00:08:43 SkyScan query 00:08:43 SkyScan query done: ret=0 az=135.705<-9047 ze=-0.945<-12063 Statuses=0009 0009 00:08:43 Msec=750 True Az=135.705 Ze=-0.945 Az status=0009 Ze status=0009 00:08:44 Check angles 00:08:44 SkyScan query 00:08:44 SkyScan query done: ret=0 az=118.05<-7870 ze=20.055<-10663 Statuses=0009 0009 00:08:44 Msec=1500 True Az=118.05 Ze=20.055 Az status=0009 Ze status=0009 00:08:44 Check angles 00:08:44 SkyScan query 00:08:45 SkyScan query done: ret=0 az=100.605<-6707 ze=40.95<-9270 Statuses=0009 0009 00:08:45 Msec=2250 True Az=100.605 Ze=40.95 Az status=0009 Ze status=0009 00:08:45 Check angles 00:08:45 SkyScan query 00:08:46 SkyScan query done: ret=0 az=86.025<-5735 ze=51.57<-8562 Statuses=0009 0008 00:08:46 Msec=3000 True Az=86.025 Ze=51.57 Az status=0009 Ze status=0008 00:08:46 Check angles 00:08:46 SkyScan query 00:08:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:08:46 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 00:08:46 Message to Master queued w/err=0: serial=46732 error=0 00:08:51 Received message from Master: op=Filter serial=46733 00:08:51 Color wheel filter change from 0 to 0 00:08:51 FLIGetFilterPos err=0 currentPosition=0 00:08:51 FLIGetStepsRemaining err=0 RemainingSteps=0 00:08:51 Filter is already there-color wheel unchanged 00:08:52 Received message from Master: op=Shutter serial=46734 00:08:52 Shutter LASER close 00:08:52 Received message from Camera: op=State serial=46736 00:08:52 GetSingleValue result=40 Value=cccccccc 00:08:52 SkyScan query 00:08:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:08:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:08:52 Parameters OK 00:08:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:08:52 Set A/D data flow result=40 00:08:52 Set A/D channel type result=40 00:08:52 Set A/D encoding result=40 00:08:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:08:52 Set channel filter=0.000000e+000 result=40 00:08:52 Config A/D Result=40 00:08:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:08:52 Get A/D filter: -9.255963e+061 result=40 00:08:52 Get A/D value=-858993460 result=40 00:08:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:08:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:08:52 Parameters OK 00:08:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:08:52 Set A/D data flow result=40 00:08:52 Set A/D channel type result=40 00:08:52 Set A/D encoding result=40 00:08:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:08:52 Set channel filter=0.000000e+000 result=40 00:08:52 Config A/D Result=40 00:08:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:08:52 Get A/D filter: -9.255963e+061 result=40 00:08:52 Get A/D value=-858993460 result=40 00:08:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:08:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:08:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:08:52 Aux= 00:08:52 Message to Camera, serial 46736 queued 00:09:29 Received message from Master: op=PointingHead serial=46749 00:09:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:09:29 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:09:29 Point started: ret=0 00:09:29 point_skyscan result=0 00:09:30 Check angles 00:09:30 SkyScan query 00:09:31 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 00:09:31 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 00:09:31 Check angles 00:09:31 SkyScan query 00:09:31 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 00:09:31 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 00:09:32 Check angles 00:09:32 SkyScan query 00:09:32 SkyScan query done: ret=0 az=143.895<-9593 ze=38.505<-9433 Statuses=0009 0008 00:09:32 Msec=1500 True Az=143.895 Ze=38.505 Az status=0009 Ze status=0008 00:09:32 Check angles 00:09:32 SkyScan query 00:09:33 SkyScan query done: ret=0 az=161.13<-10742 ze=38.505<-9433 Statuses=0009 0008 [UTC 2018-12-11 00:09:33] 00:09:33 Msec=2250 True Az=161.13 Ze=38.505 Az status=0009 Ze status=0008 00:09:33 Check angles 00:09:33 SkyScan query 00:09:34 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 00:09:34 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 00:09:34 Check angles 00:09:34 SkyScan query 00:09:34 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:09:34 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:09:34 Message to Master queued w/err=0: serial=46749 error=0 00:09:39 Received message from Master: op=Filter serial=46750 00:09:39 Color wheel filter change from 0 to 0 00:09:39 FLIGetFilterPos err=0 currentPosition=0 00:09:39 FLIGetStepsRemaining err=0 RemainingSteps=0 00:09:39 Filter is already there-color wheel unchanged 00:09:40 Received message from Master: op=Shutter serial=46751 00:09:40 Shutter LASER close 00:09:40 Received message from Camera: op=State serial=46753 00:09:40 GetSingleValue result=40 Value=cccccccc 00:09:40 SkyScan query 00:09:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:09:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:09:40 Parameters OK 00:09:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:09:40 Set A/D data flow result=40 00:09:40 Set A/D channel type result=40 00:09:40 Set A/D encoding result=40 00:09:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:09:40 Set channel filter=0.000000e+000 result=40 00:09:40 Config A/D Result=40 00:09:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:09:40 Get A/D filter: -9.255963e+061 result=40 00:09:40 Get A/D value=-858993460 result=40 00:09:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:09:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:09:40 Parameters OK 00:09:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:09:40 Set A/D data flow result=40 00:09:40 Set A/D channel type result=40 00:09:40 Set A/D encoding result=40 00:09:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:09:40 Set channel filter=0.000000e+000 result=40 00:09:40 Config A/D Result=40 00:09:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:09:40 Get A/D filter: -9.255963e+061 result=40 00:09:40 Get A/D value=-858993460 result=40 00:09:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:09:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:09:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:09:40 Aux= 00:09:40 Message to Camera, serial 46753 queued 00:10:17 Received message from Master: op=PointingHead serial=46766 00:10:17 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:10:17 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:10:18 Point started: ret=0 00:10:18 point_skyscan result=0 00:10:18 Check angles 00:10:18 SkyScan query 00:10:19 SkyScan query done: ret=0 az=152.79<-10186 ze=8.52<-11432 Statuses=0009 0009 00:10:19 Msec=0 True Az=152.79 Ze=8.52 Az status=0009 Ze status=0009 00:10:19 Check angles 00:10:19 SkyScan query 00:10:20 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.45<-12830 Statuses=0009 0009 00:10:20 Msec=750 True Az=135.435 Ze=-12.45 Az status=0009 Ze status=0009 00:10:20 Check angles 00:10:20 SkyScan query 00:10:20 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.375<-14225 Statuses=0009 0009 00:10:20 Msec=1500 True Az=117.765 Ze=-33.375 Az status=0009 Ze status=0009 00:10:21 Check angles 00:10:21 SkyScan query 00:10:21 SkyScan query done: ret=0 az=100.08<-6672 ze=-51.555<-15437 Statuses=0009 0009 00:10:21 Msec=2250 True Az=100.08 Ze=-51.555 Az status=0009 Ze status=0009 00:10:21 Check angles 00:10:21 SkyScan query 00:10:22 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.525<-15435 Statuses=0009 0008 00:10:22 Msec=3000 True Az=86.055 Ze=-51.525 Az status=0009 Ze status=0008 00:10:22 Check angles 00:10:22 SkyScan query 00:10:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:10:23 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:10:23 Message to Master queued w/err=0: serial=46766 error=0 00:10:28 Received message from Master: op=Filter serial=46767 00:10:28 Color wheel filter change from 0 to 0 00:10:28 FLIGetFilterPos err=0 currentPosition=0 00:10:28 FLIGetStepsRemaining err=0 RemainingSteps=0 00:10:28 Filter is already there-color wheel unchanged 00:10:28 Received message from Master: op=Shutter serial=46768 00:10:28 Shutter LASER close 00:10:28 Received message from Camera: op=State serial=46770 00:10:28 GetSingleValue result=40 Value=cccccccc 00:10:28 SkyScan query 00:10:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:10:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:10:28 Parameters OK 00:10:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:10:28 Set A/D data flow result=40 00:10:28 Set A/D channel type result=40 00:10:28 Set A/D encoding result=40 00:10:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:10:28 Set channel filter=0.000000e+000 result=40 00:10:28 Config A/D Result=40 00:10:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:10:28 Get A/D filter: -9.255963e+061 result=40 00:10:28 Get A/D value=-858993460 result=40 00:10:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:10:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:10:28 Parameters OK 00:10:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:10:28 Set A/D data flow result=40 00:10:28 Set A/D channel type result=40 00:10:28 Set A/D encoding result=40 00:10:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:10:28 Set channel filter=0.000000e+000 result=40 00:10:28 Config A/D Result=40 00:10:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:10:28 Get A/D filter: -9.255963e+061 result=40 00:10:28 Get A/D value=-858993460 result=40 00:10:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:10:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:10:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:10:28 Aux= 00:10:28 Message to Camera, serial 46770 queued 00:11:05 Received message from Master: op=PointingHead serial=46783 00:11:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:11:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:11:06 Point started: ret=0 00:11:06 point_skyscan result=0 00:11:06 Check angles 00:11:06 SkyScan query 00:11:07 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.48<-17432 Statuses=0009 0009 00:11:07 Msec=0 True Az=109.185 Ze=-81.48 Az status=0009 Ze status=0009 00:11:07 Check angles 00:11:07 SkyScan query 00:11:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.87<-18858 Statuses=0008 0009 00:11:08 Msec=750 True Az=112.995 Ze=-102.87 Az status=0008 Ze status=0009 00:11:08 Check angles 00:11:08 SkyScan query 00:11:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.81<-20254 Statuses=0008 0009 00:11:08 Msec=1500 True Az=112.995 Ze=-123.81 Az status=0008 Ze status=0009 00:11:09 Check angles 00:11:09 SkyScan query 00:11:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.765<-21651 Statuses=0008 0009 00:11:09 Msec=2250 True Az=112.995 Ze=-144.765 Az status=0008 Ze status=0009 00:11:09 Check angles 00:11:09 SkyScan query 00:11:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.155<-23077 Statuses=0008 0009 00:11:10 Msec=3000 True Az=112.995 Ze=-166.155 Az status=0008 Ze status=0009 00:11:10 Check angles 00:11:10 SkyScan query 00:11:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:11:11 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:11:11 Message to Master queued w/err=0: serial=46783 error=0 00:11:16 Received message from Master: op=Filter serial=46784 00:11:16 Color wheel filter change from 0 to 0 00:11:16 FLIGetFilterPos err=0 currentPosition=0 00:11:16 FLIGetStepsRemaining err=0 RemainingSteps=0 00:11:16 Filter is already there-color wheel unchanged 00:11:16 Received message from Master: op=Shutter serial=46785 00:11:16 Shutter LASER open 00:11:16 Received message from Camera: op=State serial=46787 00:11:16 GetSingleValue result=40 Value=cccccccc 00:11:16 SkyScan query 00:11:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:11:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:17 Parameters OK 00:11:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:17 Set A/D data flow result=40 00:11:17 Set A/D channel type result=40 00:11:17 Set A/D encoding result=40 00:11:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:17 Set channel filter=0.000000e+000 result=40 00:11:17 Config A/D Result=40 00:11:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:17 Get A/D filter: -9.255963e+061 result=40 00:11:17 Get A/D value=-858993460 result=40 00:11:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:17 Parameters OK 00:11:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:17 Set A/D data flow result=40 00:11:17 Set A/D channel type result=40 00:11:17 Set A/D encoding result=40 00:11:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:17 Set channel filter=0.000000e+000 result=40 00:11:17 Config A/D Result=40 00:11:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:17 Get A/D filter: -9.255963e+061 result=40 00:11:17 Get A/D value=-858993460 result=40 00:11:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:11:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:11:17 Aux= 00:11:17 Message to Camera, serial 46787 queued 00:11:25 Received message from Master: op=Shutter serial=46797 00:11:25 Shutter LASER close 00:11:26 Received message from Master: op=PointingHead serial=46801 00:11:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:11:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:11:26 Point started: ret=0 00:11:26 point_skyscan result=0 00:11:27 Check angles 00:11:27 SkyScan query 00:11:27 SkyScan query done: ret=0 az=89.865<-5991 ze=157.47<-1502 Statuses=0009 0009 00:11:27 Msec=0 True Az=89.865 Ze=157.47 Az status=0009 Ze status=0009 00:11:27 Check angles 00:11:27 SkyScan query 00:11:28 SkyScan query done: ret=0 az=72.015<-4801 ze=136.065<-2929 Statuses=0009 0009 00:11:28 Msec=750 True Az=72.015 Ze=136.065 Az status=0009 Ze status=0009 00:11:28 Check angles 00:11:28 SkyScan query 00:11:29 SkyScan query done: ret=0 az=54.45<-3630 ze=114.72<-4352 Statuses=0009 0009 00:11:29 Msec=1500 True Az=54.45 Ze=114.72 Az status=0009 Ze status=0009 00:11:29 Check angles 00:11:29 SkyScan query 00:11:29 SkyScan query done: ret=0 az=40.935<-2729 ze=93.75<-5750 Statuses=0009 0009 00:11:29 Msec=2250 True Az=40.935 Ze=93.75 Az status=0009 Ze status=0009 00:11:30 Check angles 00:11:30 SkyScan query 00:11:30 SkyScan query done: ret=0 az=40.995<-2733 ze=72.78<-7148 Statuses=0008 0009 00:11:30 Msec=3000 True Az=40.995 Ze=72.78 Az status=0008 Ze status=0009 00:11:30 Check angles 00:11:30 SkyScan query 00:11:31 SkyScan query done: ret=0 az=40.995<-2733 ze=52.44<-8504 Statuses=0008 0009 00:11:31 Msec=3750 True Az=40.995 Ze=52.44 Az status=0008 Ze status=0009 00:11:31 Check angles 00:11:31 SkyScan query 00:11:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:11:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:11:32 Message to Master queued w/err=0: serial=46801 error=0 00:11:37 Received message from Master: op=Filter serial=46802 00:11:37 Color wheel filter change from 0 to 0 00:11:37 FLIGetFilterPos err=0 currentPosition=0 00:11:37 FLIGetStepsRemaining err=0 RemainingSteps=0 00:11:37 Filter is already there-color wheel unchanged 00:11:37 Received message from Master: op=Shutter serial=46803 00:11:37 Shutter LASER close 00:11:37 Received message from Camera: op=State serial=46805 00:11:37 GetSingleValue result=40 Value=cccccccc 00:11:37 SkyScan query 00:11:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:11:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:38 Parameters OK 00:11:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:38 Set A/D data flow result=40 00:11:38 Set A/D channel type result=40 00:11:38 Set A/D encoding result=40 00:11:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:38 Set channel filter=0.000000e+000 result=40 00:11:38 Config A/D Result=40 00:11:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:38 Get A/D filter: -9.255963e+061 result=40 00:11:38 Get A/D value=-858993460 result=40 00:11:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:38 Parameters OK 00:11:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:38 Set A/D data flow result=40 00:11:38 Set A/D channel type result=40 00:11:38 Set A/D encoding result=40 00:11:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:38 Set channel filter=0.000000e+000 result=40 00:11:38 Config A/D Result=40 00:11:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:38 Get A/D filter: -9.255963e+061 result=40 00:11:38 Get A/D value=-858993460 result=40 00:11:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:11:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:11:38 Aux= 00:11:38 Message to Camera, serial 46805 queued 00:12:15 Received message from Master: op=PointingHead serial=46818 00:12:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:12:15 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:12:15 Point started: ret=0 00:12:15 point_skyscan result=0 00:12:16 Check angles 00:12:16 SkyScan query 00:12:16 SkyScan query done: ret=0 az=40.995<-2733 ze=21.51<-10566 Statuses=0008 0009 00:12:16 Msec=0 True Az=40.995 Ze=21.51 Az status=0008 Ze status=0009 00:12:16 Check angles 00:12:16 SkyScan query 00:12:17 SkyScan query done: ret=0 az=40.995<-2733 ze=0.075<-11995 Statuses=0008 0009 00:12:17 Msec=750 True Az=40.995 Ze=0.075 Az status=0008 Ze status=0009 00:12:17 Check angles 00:12:17 SkyScan query 00:12:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.835<-13389 Statuses=0008 0009 00:12:18 Msec=1500 True Az=40.995 Ze=-20.835 Az status=0008 Ze status=0009 00:12:18 Check angles 00:12:18 SkyScan query 00:12:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 00:12:19 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 00:12:19 Check angles 00:12:19 SkyScan query 00:12:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 00:12:19 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 00:12:19 Message to Master queued w/err=0: serial=46818 error=0 00:12:24 Received message from Master: op=Filter serial=46819 00:12:24 Color wheel filter change from 0 to 0 00:12:24 FLIGetFilterPos err=0 currentPosition=0 00:12:24 FLIGetStepsRemaining err=0 RemainingSteps=0 00:12:24 Filter is already there-color wheel unchanged 00:12:24 Received message from Master: op=Shutter serial=46820 00:12:24 Shutter LASER close 00:12:24 Received message from Camera: op=State serial=46822 00:12:24 GetSingleValue result=40 Value=cccccccc 00:12:24 SkyScan query 00:12:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:12:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:12:25 Parameters OK 00:12:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:12:25 Set A/D data flow result=40 00:12:25 Set A/D channel type result=40 00:12:25 Set A/D encoding result=40 00:12:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:12:25 Set channel filter=0.000000e+000 result=40 00:12:25 Config A/D Result=40 00:12:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:12:25 Get A/D filter: -9.255963e+061 result=40 00:12:25 Get A/D value=-858993460 result=40 00:12:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:12:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:12:25 Parameters OK 00:12:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:12:25 Set A/D data flow result=40 00:12:25 Set A/D channel type result=40 00:12:25 Set A/D encoding result=40 00:12:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:12:25 Set channel filter=0.000000e+000 result=40 00:12:25 Config A/D Result=40 00:12:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:12:25 Get A/D filter: -9.255963e+061 result=40 00:12:25 Get A/D value=-858993460 result=40 00:12:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:12:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:12:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:12:25 Aux= 00:12:25 Message to Camera, serial 46822 queued 00:13:02 Received message from Master: op=PointingHead serial=46835 00:13:02 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:13:02 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:13:02 Point started: ret=0 00:13:02 point_skyscan result=0 00:13:03 Check angles 00:13:03 SkyScan query 00:13:04 SkyScan query done: ret=0 az=64.02<-4268 ze=-68.445<-16563 Statuses=0009 0009 00:13:04 Msec=0 True Az=64.02 Ze=-68.445 Az status=0009 Ze status=0009 00:13:04 Check angles 00:13:04 SkyScan query 00:13:04 SkyScan query done: ret=0 az=82.08<-5472 ze=-89.85<-17990 Statuses=0009 0009 00:13:04 Msec=750 True Az=82.08 Ze=-89.85 Az status=0009 Ze status=0009 00:13:05 Check angles 00:13:05 SkyScan query 00:13:05 SkyScan query done: ret=0 az=99.54<-6636 ze=-110.79<-19386 Statuses=0009 0009 00:13:05 Msec=1500 True Az=99.54 Ze=-110.79 Az status=0009 Ze status=0009 00:13:05 Check angles 00:13:05 SkyScan query 00:13:06 SkyScan query done: ret=0 az=117.015<-7801 ze=-131.76<-20784 Statuses=0009 0009 00:13:06 Msec=2250 True Az=117.015 Ze=-131.76 Az status=0009 Ze status=0009 00:13:06 Check angles 00:13:06 SkyScan query 00:13:07 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 00:13:07 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 00:13:07 Check angles 00:13:07 SkyScan query 00:13:07 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:13:07 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:13:07 Message to Master queued w/err=0: serial=46835 error=0 00:13:12 Received message from Master: op=Filter serial=46836 00:13:12 Color wheel filter change from 0 to 0 00:13:12 FLIGetFilterPos err=0 currentPosition=0 00:13:12 FLIGetStepsRemaining err=0 RemainingSteps=0 00:13:12 Filter is already there-color wheel unchanged 00:13:13 Received message from Master: op=Shutter serial=46837 00:13:13 Shutter LASER close 00:13:13 Received message from Camera: op=State serial=46839 00:13:13 GetSingleValue result=40 Value=cccccccc 00:13:13 SkyScan query 00:13:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:13:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:13:13 Parameters OK 00:13:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:13:13 Set A/D data flow result=40 00:13:13 Set A/D channel type result=40 00:13:13 Set A/D encoding result=40 00:13:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:13:13 Set channel filter=0.000000e+000 result=40 00:13:13 Config A/D Result=40 00:13:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:13:13 Get A/D filter: -9.255963e+061 result=40 00:13:13 Get A/D value=-858993460 result=40 00:13:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:13:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:13:13 Parameters OK 00:13:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:13:13 Set A/D data flow result=40 00:13:13 Set A/D channel type result=40 00:13:13 Set A/D encoding result=40 00:13:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:13:13 Set channel filter=0.000000e+000 result=40 00:13:13 Config A/D Result=40 00:13:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:13:13 Get A/D filter: -9.255963e+061 result=40 00:13:13 Get A/D value=-858993460 result=40 00:13:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:13:13 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:13:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:13:13 Aux= 00:13:13 Message to Camera, serial 46839 queued 00:13:50 Received message from Master: op=PointingHead serial=46852 00:13:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:13:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:13:50 Point started: ret=0 00:13:50 point_skyscan result=0 00:13:51 Check angles 00:13:51 SkyScan query 00:13:52 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.865<-23391 Statuses=0009 0009 00:13:52 Msec=0 True Az=113.01 Ze=-170.865 Az status=0009 Ze status=0009 00:13:52 Check angles 00:13:52 SkyScan query 00:13:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:13:52 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:13:52 Message to Master queued w/err=0: serial=46852 error=0 00:13:57 Received message from Master: op=Filter serial=46853 00:13:57 Color wheel filter change from 0 to 0 00:13:57 FLIGetFilterPos err=0 currentPosition=0 00:13:57 FLIGetStepsRemaining err=0 RemainingSteps=0 00:13:57 Filter is already there-color wheel unchanged 00:13:58 Received message from Master: op=Shutter serial=46854 00:13:58 Shutter LASER open 00:13:58 Received message from Camera: op=State serial=46856 00:13:58 GetSingleValue result=40 Value=cccccccc 00:13:58 SkyScan query 00:13:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:13:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:13:58 Parameters OK 00:13:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:13:58 Set A/D data flow result=40 00:13:58 Set A/D channel type result=40 00:13:58 Set A/D encoding result=40 00:13:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:13:58 Set channel filter=0.000000e+000 result=40 00:13:58 Config A/D Result=40 00:13:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:13:58 Get A/D filter: -9.255963e+061 result=40 00:13:58 Get A/D value=-858993460 result=40 00:13:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:13:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:13:58 Parameters OK 00:13:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:13:58 Set A/D data flow result=40 00:13:58 Set A/D channel type result=40 00:13:58 Set A/D encoding result=40 00:13:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:13:58 Set channel filter=0.000000e+000 result=40 00:13:58 Config A/D Result=40 00:13:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:13:58 Get A/D filter: -9.255963e+061 result=40 00:13:58 Get A/D value=-858993460 result=40 00:13:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:13:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:13:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:13:58 Aux= 00:13:58 Message to Camera, serial 46856 queued 00:14:06 Received message from Master: op=Shutter serial=46865 00:14:06 Shutter LASER close 00:14:06 Received message from Master: op=PointingHead serial=46869 00:14:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:14:06 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:14:07 Point started: ret=0 00:14:07 point_skyscan result=0 00:14:08 Check angles 00:14:08 SkyScan query 00:14:08 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.385<-21559 Statuses=0009 0009 00:14:08 Msec=0 True Az=135.885 Ze=-143.385 Az status=0009 Ze status=0009 00:14:08 Check angles 00:14:08 SkyScan query 00:14:09 SkyScan query done: ret=0 az=153.42<-10228 ze=-122.415<-20161 Statuses=0009 0009 00:14:09 Msec=750 True Az=153.42 Ze=-122.415 Az status=0009 Ze status=0009 00:14:09 Check angles 00:14:09 SkyScan query 00:14:10 SkyScan query done: ret=0 az=171.27<-11418 ze=-101.055<-18737 Statuses=0009 0009 00:14:10 Msec=1500 True Az=171.27 Ze=-101.055 Az status=0009 Ze status=0009 00:14:10 Check angles 00:14:10 SkyScan query 00:14:10 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.085<-17339 Statuses=0008 0009 00:14:10 Msec=2250 True Az=176.025 Ze=-80.085 Az status=0008 Ze status=0009 00:14:11 Check angles 00:14:11 SkyScan query 00:14:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.145<-15943 Statuses=0008 0009 00:14:11 Msec=3000 True Az=175.995 Ze=-59.145 Az status=0008 Ze status=0009 00:14:11 Check angles 00:14:11 SkyScan query 00:14:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:14:12 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:14:12 Message to Master queued w/err=0: serial=46869 error=0 00:14:17 Received message from Master: op=Filter serial=46870 00:14:17 Color wheel filter change from 0 to 0 00:14:17 FLIGetFilterPos err=0 currentPosition=0 00:14:17 FLIGetStepsRemaining err=0 RemainingSteps=0 00:14:17 Filter is already there-color wheel unchanged 00:14:17 Received message from Master: op=Shutter serial=46871 00:14:17 Shutter LASER close 00:14:17 Received message from Camera: op=State serial=46873 00:14:17 GetSingleValue result=40 Value=cccccccc 00:14:17 SkyScan query 00:14:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:14:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:14:18 Parameters OK 00:14:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:14:18 Set A/D data flow result=40 00:14:18 Set A/D channel type result=40 00:14:18 Set A/D encoding result=40 00:14:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:14:18 Set channel filter=0.000000e+000 result=40 00:14:18 Config A/D Result=40 00:14:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:14:18 Get A/D filter: -9.255963e+061 result=40 00:14:18 Get A/D value=-858993460 result=40 00:14:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:14:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:14:18 Parameters OK 00:14:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:14:18 Set A/D data flow result=40 00:14:18 Set A/D channel type result=40 00:14:18 Set A/D encoding result=40 00:14:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:14:18 Set channel filter=0.000000e+000 result=40 00:14:18 Config A/D Result=40 00:14:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:14:18 Get A/D filter: -9.255963e+061 result=40 00:14:18 Get A/D value=-858993460 result=40 00:14:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:14:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:14:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:14:18 Aux= 00:14:18 Message to Camera, serial 46873 queued 00:14:54 Received message from Master: op=PointingHead serial=46885 00:14:54 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:14:54 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:14:54 Point started: ret=0 00:14:54 point_skyscan result=0 00:14:55 Check angles 00:14:55 SkyScan query 00:14:55 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.465<-13431 Statuses=0009 0009 00:14:55 Msec=0 True Az=152.76 Ze=-21.465 Az status=0009 Ze status=0009 00:14:56 Check angles 00:14:56 SkyScan query 00:14:56 SkyScan query done: ret=0 az=134.91<-8994 ze=-0.015<-12001 Statuses=0009 0009 00:14:56 Msec=750 True Az=134.91 Ze=-0.015 Az status=0009 Ze status=0009 00:14:56 Check angles 00:14:56 SkyScan query 00:14:57 SkyScan query done: ret=0 az=117.3<-7820 ze=20.925<-10605 Statuses=0009 0009 00:14:57 Msec=1500 True Az=117.3 Ze=20.925 Az status=0009 Ze status=0009 00:14:57 Check angles 00:14:57 SkyScan query 00:14:58 SkyScan query done: ret=0 az=99.99<-6666 ze=41.895<-9207 Statuses=0009 0009 00:14:58 Msec=2250 True Az=99.99 Ze=41.895 Az status=0009 Ze status=0009 00:14:58 Check angles 00:14:58 SkyScan query 00:14:58 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 00:14:58 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 00:14:59 Check angles 00:14:59 SkyScan query 00:14:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:14:59 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:14:59 Message to Master queued w/err=0: serial=46885 error=0 00:15:04 Received message from Master: op=Filter serial=46886 00:15:04 Color wheel filter change from 0 to 0 00:15:04 FLIGetFilterPos err=0 currentPosition=0 00:15:04 FLIGetStepsRemaining err=0 RemainingSteps=0 00:15:04 Filter is already there-color wheel unchanged 00:15:04 Received message from Master: op=Shutter serial=46887 00:15:04 Shutter LASER close 00:15:04 Received message from Camera: op=State serial=46889 00:15:04 GetSingleValue result=40 Value=cccccccc 00:15:04 SkyScan query 00:15:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:15:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:15:05 Parameters OK 00:15:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:15:05 Set A/D data flow result=40 00:15:05 Set A/D channel type result=40 00:15:05 Set A/D encoding result=40 00:15:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:15:05 Set channel filter=0.000000e+000 result=40 00:15:05 Config A/D Result=40 00:15:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:15:05 Get A/D filter: -9.255963e+061 result=40 00:15:05 Get A/D value=-858993460 result=40 00:15:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:15:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:15:05 Parameters OK 00:15:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:15:05 Set A/D data flow result=40 00:15:05 Set A/D channel type result=40 00:15:05 Set A/D encoding result=40 00:15:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:15:05 Set channel filter=0.000000e+000 result=40 00:15:05 Config A/D Result=40 00:15:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:15:05 Get A/D filter: -9.255963e+061 result=40 00:15:05 Get A/D value=-858993460 result=40 00:15:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:15:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:15:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:15:05 Aux= 00:15:05 Message to Camera, serial 46889 queued 00:15:29 Received message from Master: op=Identify serial=46890 00:15:42 Received message from Master: op=PointingHead serial=46905 00:15:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:15:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:15:42 Point started: ret=0 00:15:42 point_skyscan result=0 00:15:43 Check angles 00:15:43 SkyScan query 00:15:44 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 00:15:44 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 00:15:44 Check angles 00:15:44 SkyScan query 00:15:44 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 00:15:44 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 00:15:44 Check angles 00:15:44 SkyScan query 00:15:45 SkyScan query done: ret=0 az=144.15<-9610 ze=38.505<-9433 Statuses=0009 0008 00:15:45 Msec=1500 True Az=144.15 Ze=38.505 Az status=0009 Ze status=0008 00:15:45 Check angles 00:15:45 SkyScan query 00:15:46 SkyScan query done: ret=0 az=161.535<-10769 ze=38.505<-9433 Statuses=0009 0008 00:15:46 Msec=2250 True Az=161.535 Ze=38.505 Az status=0009 Ze status=0008 00:15:46 Check angles 00:15:46 SkyScan query 00:15:47 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:15:47 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:15:47 Check angles 00:15:47 SkyScan query 00:15:47 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:15:47 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:15:47 Message to Master queued w/err=0: serial=46905 error=0 00:15:52 Received message from Master: op=Filter serial=46906 00:15:52 Color wheel filter change from 0 to 0 00:15:52 FLIGetFilterPos err=0 currentPosition=0 00:15:52 FLIGetStepsRemaining err=0 RemainingSteps=0 00:15:52 Filter is already there-color wheel unchanged 00:15:52 Received message from Master: op=Shutter serial=46907 00:15:52 Shutter LASER close 00:15:53 Received message from Camera: op=State serial=46909 00:15:53 GetSingleValue result=40 Value=cccccccc 00:15:53 SkyScan query 00:15:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:15:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:15:53 Parameters OK 00:15:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:15:53 Set A/D data flow result=40 00:15:53 Set A/D channel type result=40 00:15:53 Set A/D encoding result=40 00:15:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:15:53 Set channel filter=0.000000e+000 result=40 00:15:53 Config A/D Result=40 00:15:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:15:53 Get A/D filter: -9.255963e+061 result=40 00:15:53 Get A/D value=-858993460 result=40 00:15:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:15:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:15:53 Parameters OK 00:15:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:15:53 Set A/D data flow result=40 00:15:53 Set A/D channel type result=40 00:15:53 Set A/D encoding result=40 00:15:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:15:53 Set channel filter=0.000000e+000 result=40 00:15:53 Config A/D Result=40 00:15:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:15:53 Get A/D filter: -9.255963e+061 result=40 00:15:53 Get A/D value=-858993460 result=40 00:15:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:15:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:15:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:15:53 Aux= 00:15:53 Message to Camera, serial 46909 queued [UTC 2018-12-11 00:15:54] 00:16:30 Received message from Master: op=PointingHead serial=46922 00:16:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:16:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:16:30 Point started: ret=0 00:16:30 point_skyscan result=0 00:16:31 Check angles 00:16:31 SkyScan query 00:16:32 SkyScan query done: ret=0 az=152.985<-10199 ze=8.565<-11429 Statuses=0009 0009 00:16:32 Msec=0 True Az=152.985 Ze=8.565 Az status=0009 Ze status=0009 00:16:32 Check angles 00:16:32 SkyScan query 00:16:32 SkyScan query done: ret=0 az=135.465<-9031 ze=-12.375<-12825 Statuses=0009 0009 00:16:32 Msec=750 True Az=135.465 Ze=-12.375 Az status=0009 Ze status=0009 00:16:33 Check angles 00:16:33 SkyScan query 00:16:33 SkyScan query done: ret=0 az=117.93<-7862 ze=-33.315<-14221 Statuses=0009 0009 00:16:33 Msec=1500 True Az=117.93 Ze=-33.315 Az status=0009 Ze status=0009 00:16:33 Check angles 00:16:33 SkyScan query 00:16:34 SkyScan query done: ret=0 az=100.5<-6700 ze=-51.54<-15436 Statuses=0009 0009 00:16:34 Msec=2250 True Az=100.5 Ze=-51.54 Az status=0009 Ze status=0009 00:16:34 Check angles 00:16:34 SkyScan query 00:16:35 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 00:16:35 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 00:16:35 Check angles 00:16:35 SkyScan query 00:16:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:16:35 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:16:35 Message to Master queued w/err=0: serial=46922 error=0 00:16:40 Received message from Master: op=Filter serial=46923 00:16:40 Color wheel filter change from 0 to 0 00:16:40 FLIGetFilterPos err=0 currentPosition=0 00:16:40 FLIGetStepsRemaining err=0 RemainingSteps=0 00:16:40 Filter is already there-color wheel unchanged 00:16:41 Received message from Master: op=Shutter serial=46924 00:16:41 Shutter LASER close 00:16:41 Received message from Camera: op=State serial=46926 00:16:41 GetSingleValue result=40 Value=cccccccc 00:16:41 SkyScan query 00:16:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:16:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:16:41 Parameters OK 00:16:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:16:41 Set A/D data flow result=40 00:16:41 Set A/D channel type result=40 00:16:41 Set A/D encoding result=40 00:16:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:16:41 Set channel filter=0.000000e+000 result=40 00:16:41 Config A/D Result=40 00:16:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:16:41 Get A/D filter: -9.255963e+061 result=40 00:16:41 Get A/D value=-858993460 result=40 00:16:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:16:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:16:41 Parameters OK 00:16:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:16:41 Set A/D data flow result=40 00:16:41 Set A/D channel type result=40 00:16:41 Set A/D encoding result=40 00:16:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:16:41 Set channel filter=0.000000e+000 result=40 00:16:41 Config A/D Result=40 00:16:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:16:41 Get A/D filter: -9.255963e+061 result=40 00:16:41 Get A/D value=-858993460 result=40 00:16:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:16:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:16:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:16:41 Aux= 00:16:41 Message to Camera, serial 46926 queued 00:17:18 Received message from Master: op=PointingHead serial=46939 00:17:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:17:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:17:18 Point started: ret=0 00:17:18 point_skyscan result=0 00:17:19 Check angles 00:17:19 SkyScan query 00:17:20 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.27<-17418 Statuses=0009 0009 00:17:20 Msec=0 True Az=108.99 Ze=-81.27 Az status=0009 Ze status=0009 00:17:20 Check angles 00:17:20 SkyScan query 00:17:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.21<-18814 Statuses=0008 0009 00:17:20 Msec=750 True Az=112.995 Ze=-102.21 Az status=0008 Ze status=0009 00:17:21 Check angles 00:17:21 SkyScan query 00:17:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.585<-20239 Statuses=0008 0009 00:17:21 Msec=1500 True Az=112.995 Ze=-123.585 Az status=0008 Ze status=0009 00:17:21 Check angles 00:17:21 SkyScan query 00:17:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.555<-21637 Statuses=0008 0009 00:17:22 Msec=2250 True Az=112.995 Ze=-144.555 Az status=0008 Ze status=0009 00:17:22 Check angles 00:17:22 SkyScan query 00:17:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.495<-23033 Statuses=0008 0009 00:17:23 Msec=3000 True Az=112.995 Ze=-165.495 Az status=0008 Ze status=0009 00:17:23 Check angles 00:17:23 SkyScan query 00:17:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:17:23 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:17:23 Message to Master queued w/err=0: serial=46939 error=0 00:17:28 Received message from Master: op=Filter serial=46940 00:17:28 Color wheel filter change from 0 to 0 00:17:28 FLIGetFilterPos err=0 currentPosition=0 00:17:28 FLIGetStepsRemaining err=0 RemainingSteps=0 00:17:28 Filter is already there-color wheel unchanged 00:17:29 Received message from Master: op=Shutter serial=46941 00:17:29 Shutter LASER open 00:17:29 Received message from Camera: op=State serial=46943 00:17:29 GetSingleValue result=40 Value=cccccccc 00:17:29 SkyScan query 00:17:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:17:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:29 Parameters OK 00:17:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:29 Set A/D data flow result=40 00:17:29 Set A/D channel type result=40 00:17:29 Set A/D encoding result=40 00:17:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:29 Set channel filter=0.000000e+000 result=40 00:17:29 Config A/D Result=40 00:17:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:29 Get A/D filter: -9.255963e+061 result=40 00:17:29 Get A/D value=-858993460 result=40 00:17:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:29 Parameters OK 00:17:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:29 Set A/D data flow result=40 00:17:29 Set A/D channel type result=40 00:17:29 Set A/D encoding result=40 00:17:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:29 Set channel filter=0.000000e+000 result=40 00:17:29 Config A/D Result=40 00:17:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:29 Get A/D filter: -9.255963e+061 result=40 00:17:29 Get A/D value=-858993460 result=40 00:17:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:17:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:17:29 Aux= 00:17:29 Message to Camera, serial 46943 queued 00:17:38 Received message from Master: op=Shutter serial=46953 00:17:38 Shutter LASER close 00:17:38 Received message from Master: op=PointingHead serial=46957 00:17:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:17:38 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:17:39 Point started: ret=0 00:17:39 point_skyscan result=0 00:17:39 Check angles 00:17:39 SkyScan query 00:17:40 SkyScan query done: ret=0 az=89.58<-5972 ze=156.9<-1540 Statuses=0009 0009 00:17:40 Msec=0 True Az=89.58 Ze=156.9 Az status=0009 Ze status=0009 00:17:40 Check angles 00:17:40 SkyScan query 00:17:41 SkyScan query done: ret=0 az=72.075<-4805 ze=135.915<-2939 Statuses=0009 0009 00:17:41 Msec=750 True Az=72.075 Ze=135.915 Az status=0009 Ze status=0009 00:17:41 Check angles 00:17:41 SkyScan query 00:17:41 SkyScan query done: ret=0 az=54.81<-3654 ze=114.99<-4334 Statuses=0009 0009 00:17:41 Msec=1500 True Az=54.81 Ze=114.99 Az status=0009 Ze status=0009 00:17:42 Check angles 00:17:42 SkyScan query 00:17:42 SkyScan query done: ret=0 az=40.905<-2727 ze=93.99<-5734 Statuses=0009 0009 00:17:42 Msec=2250 True Az=40.905 Ze=93.99 Az status=0009 Ze status=0009 00:17:42 Check angles 00:17:42 SkyScan query 00:17:43 SkyScan query done: ret=0 az=40.995<-2733 ze=73.05<-7130 Statuses=0008 0009 00:17:43 Msec=3000 True Az=40.995 Ze=73.05 Az status=0008 Ze status=0009 00:17:43 Check angles 00:17:43 SkyScan query 00:17:44 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 00:17:44 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 00:17:44 Check angles 00:17:44 SkyScan query 00:17:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:17:44 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:17:44 Message to Master queued w/err=0: serial=46957 error=0 00:17:49 Received message from Master: op=Filter serial=46958 00:17:49 Color wheel filter change from 0 to 0 00:17:49 FLIGetFilterPos err=0 currentPosition=0 00:17:49 FLIGetStepsRemaining err=0 RemainingSteps=0 00:17:49 Filter is already there-color wheel unchanged 00:17:50 Received message from Master: op=Shutter serial=46959 00:17:50 Shutter LASER close 00:17:50 Received message from Camera: op=State serial=46961 00:17:50 GetSingleValue result=40 Value=cccccccc 00:17:50 SkyScan query 00:17:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:17:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:50 Parameters OK 00:17:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:50 Set A/D data flow result=40 00:17:50 Set A/D channel type result=40 00:17:50 Set A/D encoding result=40 00:17:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:50 Set channel filter=0.000000e+000 result=40 00:17:50 Config A/D Result=40 00:17:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:50 Get A/D filter: -9.255963e+061 result=40 00:17:50 Get A/D value=-858993460 result=40 00:17:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:50 Parameters OK 00:17:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:50 Set A/D data flow result=40 00:17:50 Set A/D channel type result=40 00:17:50 Set A/D encoding result=40 00:17:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:50 Set channel filter=0.000000e+000 result=40 00:17:50 Config A/D Result=40 00:17:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:50 Get A/D filter: -9.255963e+061 result=40 00:17:50 Get A/D value=-858993460 result=40 00:17:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:17:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:17:50 Aux= 00:17:50 Message to Camera, serial 46961 queued 00:18:27 Received message from Master: op=PointingHead serial=46974 00:18:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:18:27 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:18:28 Point started: ret=0 00:18:28 point_skyscan result=0 00:18:28 Check angles 00:18:28 SkyScan query 00:18:29 SkyScan query done: ret=0 az=40.995<-2733 ze=21.225<-10585 Statuses=0008 0009 00:18:29 Msec=0 True Az=40.995 Ze=21.225 Az status=0008 Ze status=0009 00:18:29 Check angles 00:18:29 SkyScan query 00:18:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-0.15<-12010 Statuses=0008 0009 00:18:30 Msec=750 True Az=40.995 Ze=-0.15 Az status=0008 Ze status=0009 00:18:30 Check angles 00:18:30 SkyScan query 00:18:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.54<-13436 Statuses=0008 0009 00:18:31 Msec=1500 True Az=40.995 Ze=-21.54 Az status=0008 Ze status=0009 00:18:31 Check angles 00:18:31 SkyScan query 00:18:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 00:18:31 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 00:18:31 Check angles 00:18:31 SkyScan query 00:18:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 00:18:32 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 00:18:32 Message to Master queued w/err=0: serial=46974 error=0 00:18:37 Received message from Master: op=Filter serial=46975 00:18:37 Color wheel filter change from 0 to 0 00:18:37 FLIGetFilterPos err=0 currentPosition=0 00:18:37 FLIGetStepsRemaining err=0 RemainingSteps=0 00:18:37 Filter is already there-color wheel unchanged 00:18:37 Received message from Master: op=Shutter serial=46976 00:18:37 Shutter LASER close 00:18:37 Received message from Camera: op=State serial=46978 00:18:37 GetSingleValue result=40 Value=cccccccc 00:18:37 SkyScan query 00:18:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:18:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:18:38 Parameters OK 00:18:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:18:38 Set A/D data flow result=40 00:18:38 Set A/D channel type result=40 00:18:38 Set A/D encoding result=40 00:18:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:18:38 Set channel filter=0.000000e+000 result=40 00:18:38 Config A/D Result=40 00:18:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:18:38 Get A/D filter: -9.255963e+061 result=40 00:18:38 Get A/D value=-858993460 result=40 00:18:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:18:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:18:38 Parameters OK 00:18:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:18:38 Set A/D data flow result=40 00:18:38 Set A/D channel type result=40 00:18:38 Set A/D encoding result=40 00:18:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:18:38 Set channel filter=0.000000e+000 result=40 00:18:38 Config A/D Result=40 00:18:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:18:38 Get A/D filter: -9.255963e+061 result=40 00:18:38 Get A/D value=-858993460 result=40 00:18:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:18:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:18:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:18:38 Aux= 00:18:38 Message to Camera, serial 46978 queued 00:19:15 Received message from Master: op=PointingHead serial=46991 00:19:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:19:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:19:15 Point started: ret=0 00:19:15 point_skyscan result=0 00:19:16 Check angles 00:19:16 SkyScan query 00:19:16 SkyScan query done: ret=0 az=63.9<-4260 ze=-68.31<-16554 Statuses=0009 0009 00:19:16 Msec=0 True Az=63.9 Ze=-68.31 Az status=0009 Ze status=0009 00:19:17 Check angles 00:19:17 SkyScan query 00:19:17 SkyScan query done: ret=0 az=81.9<-5460 ze=-89.73<-17982 Statuses=0009 0009 00:19:17 Msec=750 True Az=81.9 Ze=-89.73 Az status=0009 Ze status=0009 00:19:17 Check angles 00:19:17 SkyScan query 00:19:18 SkyScan query done: ret=0 az=99.375<-6625 ze=-110.67<-19378 Statuses=0009 0009 00:19:18 Msec=1500 True Az=99.375 Ze=-110.67 Az status=0009 Ze status=0009 00:19:18 Check angles 00:19:18 SkyScan query 00:19:19 SkyScan query done: ret=0 az=116.97<-7798 ze=-131.625<-20775 Statuses=0009 0009 00:19:19 Msec=2250 True Az=116.97 Ze=-131.625 Az status=0009 Ze status=0009 00:19:19 Check angles 00:19:19 SkyScan query 00:19:19 SkyScan query done: ret=0 az=131.16<-8744 ze=-141.555<-21437 Statuses=0009 0008 00:19:19 Msec=3000 True Az=131.16 Ze=-141.555 Az status=0009 Ze status=0008 00:19:20 Check angles 00:19:20 SkyScan query 00:19:20 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 00:19:20 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 00:19:20 Message to Master queued w/err=0: serial=46991 error=0 00:19:25 Received message from Master: op=Filter serial=46992 00:19:25 Color wheel filter change from 0 to 0 00:19:25 FLIGetFilterPos err=0 currentPosition=0 00:19:25 FLIGetStepsRemaining err=0 RemainingSteps=0 00:19:25 Filter is already there-color wheel unchanged 00:19:25 Received message from Master: op=Shutter serial=46993 00:19:25 Shutter LASER close 00:19:25 Received message from Camera: op=State serial=46995 00:19:25 GetSingleValue result=40 Value=cccccccc 00:19:25 SkyScan query 00:19:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:19:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:19:26 Parameters OK 00:19:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:19:26 Set A/D data flow result=40 00:19:26 Set A/D channel type result=40 00:19:26 Set A/D encoding result=40 00:19:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:19:26 Set channel filter=0.000000e+000 result=40 00:19:26 Config A/D Result=40 00:19:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:19:26 Get A/D filter: -9.255963e+061 result=40 00:19:26 Get A/D value=-858993460 result=40 00:19:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:19:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:19:26 Parameters OK 00:19:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:19:26 Set A/D data flow result=40 00:19:26 Set A/D channel type result=40 00:19:26 Set A/D encoding result=40 00:19:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:19:26 Set channel filter=0.000000e+000 result=40 00:19:26 Config A/D Result=40 00:19:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:19:26 Get A/D filter: -9.255963e+061 result=40 00:19:26 Get A/D value=-858993460 result=40 00:19:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:19:26 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:19:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:19:26 Aux= 00:19:26 Message to Camera, serial 46995 queued 00:20:03 Received message from Master: op=PointingHead serial=47008 00:20:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:20:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:20:03 Point started: ret=0 00:20:03 point_skyscan result=0 00:20:04 Check angles 00:20:04 SkyScan query 00:20:04 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.21<-23414 Statuses=0009 0009 00:20:04 Msec=0 True Az=113.01 Ze=-171.21 Az status=0009 Ze status=0009 00:20:05 Check angles 00:20:05 SkyScan query 00:20:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:20:05 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:20:05 Message to Master queued w/err=0: serial=47008 error=0 00:20:10 Received message from Master: op=Filter serial=47009 00:20:10 Color wheel filter change from 0 to 0 00:20:10 FLIGetFilterPos err=0 currentPosition=0 00:20:10 FLIGetStepsRemaining err=0 RemainingSteps=0 00:20:10 Filter is already there-color wheel unchanged 00:20:10 Received message from Master: op=Shutter serial=47010 00:20:10 Shutter LASER open 00:20:11 Received message from Camera: op=State serial=47012 00:20:11 GetSingleValue result=40 Value=cccccccc 00:20:11 SkyScan query 00:20:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:20:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:11 Parameters OK 00:20:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:11 Set A/D data flow result=40 00:20:11 Set A/D channel type result=40 00:20:11 Set A/D encoding result=40 00:20:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:11 Set channel filter=0.000000e+000 result=40 00:20:11 Config A/D Result=40 00:20:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:11 Get A/D filter: -9.255963e+061 result=40 00:20:11 Get A/D value=-858993460 result=40 00:20:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:11 Parameters OK 00:20:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:11 Set A/D data flow result=40 00:20:11 Set A/D channel type result=40 00:20:11 Set A/D encoding result=40 00:20:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:11 Set channel filter=0.000000e+000 result=40 00:20:11 Config A/D Result=40 00:20:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:11 Get A/D filter: -9.255963e+061 result=40 00:20:11 Get A/D value=-858993460 result=40 00:20:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:20:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:20:11 Aux= 00:20:11 Message to Camera, serial 47012 queued 00:20:20 Received message from Master: op=Shutter serial=47022 00:20:20 Shutter LASER close 00:20:20 Received message from Master: op=PointingHead serial=47026 00:20:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:20:20 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:20:21 Point started: ret=0 00:20:21 point_skyscan result=0 00:20:21 Check angles 00:20:21 SkyScan query 00:20:22 SkyScan query done: ret=0 az=136.41<-9094 ze=-142.62<-21508 Statuses=0009 0009 00:20:22 Msec=0 True Az=136.41 Ze=-142.62 Az status=0009 Ze status=0009 00:20:22 Check angles 00:20:22 SkyScan query 00:20:23 SkyScan query done: ret=0 az=153.87<-10258 ze=-121.755<-20117 Statuses=0009 0009 00:20:23 Msec=750 True Az=153.87 Ze=-121.755 Az status=0009 Ze status=0009 00:20:23 Check angles 00:20:23 SkyScan query 00:20:23 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.815<-18721 Statuses=0009 0009 00:20:23 Msec=1500 True Az=171.405 Ze=-100.815 Az status=0009 Ze status=0009 00:20:24 Check angles 00:20:24 SkyScan query 00:20:24 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.875<-17325 Statuses=0008 0009 00:20:24 Msec=2250 True Az=176.025 Ze=-79.875 Az status=0008 Ze status=0009 00:20:24 Check angles 00:20:24 SkyScan query 00:20:25 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.44<-15896 Statuses=0008 0009 00:20:25 Msec=3000 True Az=176.01 Ze=-58.44 Az status=0008 Ze status=0009 00:20:25 Check angles 00:20:25 SkyScan query 00:20:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 00:20:26 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 00:20:26 Message to Master queued w/err=0: serial=47026 error=0 00:20:31 Received message from Master: op=Filter serial=47027 00:20:31 Color wheel filter change from 0 to 0 00:20:31 FLIGetFilterPos err=0 currentPosition=0 00:20:31 FLIGetStepsRemaining err=0 RemainingSteps=0 00:20:31 Filter is already there-color wheel unchanged 00:20:31 Received message from Master: op=Shutter serial=47028 00:20:31 Shutter LASER close 00:20:31 Received message from Camera: op=State serial=47030 00:20:31 GetSingleValue result=40 Value=cccccccc 00:20:31 SkyScan query 00:20:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:20:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:32 Parameters OK 00:20:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:32 Set A/D data flow result=40 00:20:32 Set A/D channel type result=40 00:20:32 Set A/D encoding result=40 00:20:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:32 Set channel filter=0.000000e+000 result=40 00:20:32 Config A/D Result=40 00:20:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:32 Get A/D filter: -9.255963e+061 result=40 00:20:32 Get A/D value=-858993460 result=40 00:20:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:32 Parameters OK 00:20:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:32 Set A/D data flow result=40 00:20:32 Set A/D channel type result=40 00:20:32 Set A/D encoding result=40 00:20:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:32 Set channel filter=0.000000e+000 result=40 00:20:32 Config A/D Result=40 00:20:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:32 Get A/D filter: -9.255963e+061 result=40 00:20:32 Get A/D value=-858993460 result=40 00:20:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:20:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:20:32 Aux= 00:20:32 Message to Camera, serial 47030 queued 00:21:08 Received message from Master: op=PointingHead serial=47043 00:21:08 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:21:08 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:21:09 Point started: ret=0 00:21:09 point_skyscan result=0 00:21:09 Check angles 00:21:09 SkyScan query 00:21:10 SkyScan query done: ret=0 az=152.7<-10180 ze=-21.405<-13427 Statuses=0009 0009 00:21:10 Msec=0 True Az=152.7 Ze=-21.405 Az status=0009 Ze status=0009 00:21:10 Check angles 00:21:10 SkyScan query 00:21:11 SkyScan query done: ret=0 az=134.715<-8981 ze=0.015<-11999 Statuses=0009 0009 00:21:11 Msec=750 True Az=134.715 Ze=0.015 Az status=0009 Ze status=0009 00:21:11 Check angles 00:21:11 SkyScan query 00:21:12 SkyScan query done: ret=0 az=117.21<-7814 ze=20.94<-10604 Statuses=0009 0009 00:21:12 Msec=1500 True Az=117.21 Ze=20.94 Az status=0009 Ze status=0009 00:21:12 Check angles 00:21:12 SkyScan query 00:21:12 SkyScan query done: ret=0 az=99.93<-6662 ze=41.94<-9204 Statuses=0009 0009 00:21:12 Msec=2250 True Az=99.93 Ze=41.94 Az status=0009 Ze status=0009 00:21:13 Check angles 00:21:13 SkyScan query 00:21:13 SkyScan query done: ret=0 az=86.055<-5737 ze=51.54<-8564 Statuses=0009 0008 00:21:13 Msec=3000 True Az=86.055 Ze=51.54 Az status=0009 Ze status=0008 00:21:13 Check angles 00:21:13 SkyScan query 00:21:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:21:14 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:21:14 Message to Master queued w/err=0: serial=47043 error=0 00:21:19 Received message from Master: op=Filter serial=47044 00:21:19 Color wheel filter change from 0 to 0 00:21:19 FLIGetFilterPos err=0 currentPosition=0 00:21:19 FLIGetStepsRemaining err=0 RemainingSteps=0 00:21:19 Filter is already there-color wheel unchanged 00:21:19 Received message from Master: op=Shutter serial=47045 00:21:19 Shutter LASER close 00:21:19 Received message from Camera: op=State serial=47047 00:21:19 GetSingleValue result=40 Value=cccccccc 00:21:19 SkyScan query 00:21:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:21:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:21:20 Parameters OK 00:21:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:21:20 Set A/D data flow result=40 00:21:20 Set A/D channel type result=40 00:21:20 Set A/D encoding result=40 00:21:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:21:20 Set channel filter=0.000000e+000 result=40 00:21:20 Config A/D Result=40 00:21:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:21:20 Get A/D filter: -9.255963e+061 result=40 00:21:20 Get A/D value=-858993460 result=40 00:21:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:21:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:21:20 Parameters OK 00:21:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:21:20 Set A/D data flow result=40 00:21:20 Set A/D channel type result=40 00:21:20 Set A/D encoding result=40 00:21:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:21:20 Set channel filter=0.000000e+000 result=40 00:21:20 Config A/D Result=40 00:21:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:21:20 Get A/D filter: -9.255963e+061 result=40 00:21:20 Get A/D value=-858993460 result=40 00:21:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:21:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:21:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:21:20 Aux= 00:21:20 Message to Camera, serial 47047 queued 00:21:56 Received message from Master: op=PointingHead serial=47060 00:21:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:21:56 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:21:57 Point started: ret=0 00:21:57 point_skyscan result=0 00:21:58 Check angles 00:21:58 SkyScan query 00:21:58 SkyScan query done: ret=0 az=108.825<-7255 ze=38.49<-9434 Statuses=0009 0008 00:21:58 Msec=0 True Az=108.825 Ze=38.49 Az status=0009 Ze status=0008 00:21:58 Check angles 00:21:58 SkyScan query 00:21:59 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 00:21:59 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 00:21:59 Check angles 00:21:59 SkyScan query 00:22:00 SkyScan query done: ret=0 az=144.18<-9612 ze=38.505<-9433 Statuses=0009 0008 00:22:00 Msec=1500 True Az=144.18 Ze=38.505 Az status=0009 Ze status=0008 00:22:00 Check angles 00:22:00 SkyScan query 00:22:00 SkyScan query done: ret=0 az=161.58<-10772 ze=38.505<-9433 Statuses=0009 0008 00:22:00 Msec=2250 True Az=161.58 Ze=38.505 Az status=0009 Ze status=0008 00:22:01 Check angles 00:22:01 SkyScan query 00:22:01 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:22:01 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:22:01 Check angles 00:22:01 SkyScan query 00:22:02 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:22:02 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:22:02 Message to Master queued w/err=0: serial=47060 error=0 00:22:07 Received message from Master: op=Filter serial=47061 00:22:07 Color wheel filter change from 0 to 0 00:22:07 FLIGetFilterPos err=0 currentPosition=0 00:22:07 FLIGetStepsRemaining err=0 RemainingSteps=0 00:22:07 Filter is already there-color wheel unchanged 00:22:07 Received message from Master: op=Shutter serial=47062 00:22:07 Shutter LASER close 00:22:07 Received message from Camera: op=State serial=47064 00:22:07 GetSingleValue result=40 Value=cccccccc 00:22:07 SkyScan query 00:22:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:22:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:22:08 Parameters OK 00:22:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:22:08 Set A/D data flow result=40 00:22:08 Set A/D channel type result=40 00:22:08 Set A/D encoding result=40 00:22:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:22:08 Set channel filter=0.000000e+000 result=40 00:22:08 Config A/D Result=40 00:22:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:22:08 Get A/D filter: -9.255963e+061 result=40 00:22:08 Get A/D value=-858993460 result=40 00:22:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:22:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:22:08 Parameters OK 00:22:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:22:08 Set A/D data flow result=40 00:22:08 Set A/D channel type result=40 00:22:08 Set A/D encoding result=40 00:22:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:22:08 Set channel filter=0.000000e+000 result=40 00:22:08 Config A/D Result=40 00:22:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:22:08 Get A/D filter: -9.255963e+061 result=40 00:22:08 Get A/D value=-858993460 result=40 00:22:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:22:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:22:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:22:08 Aux= 00:22:08 Message to Camera, serial 47064 queued 00:22:45 Received message from Master: op=PointingHead serial=47077 00:22:45 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:22:45 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:22:45 Point started: ret=0 00:22:45 point_skyscan result=0 00:22:46 Check angles 00:22:46 SkyScan query 00:22:46 SkyScan query done: ret=0 az=152.775<-10185 ze=8.535<-11431 Statuses=0009 0009 00:22:46 Msec=0 True Az=152.775 Ze=8.535 Az status=0009 Ze status=0009 00:22:46 Check angles 00:22:46 SkyScan query 00:22:47 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.405<-12827 Statuses=0009 0009 00:22:47 Msec=750 True Az=135.435 Ze=-12.405 Az status=0009 Ze status=0009 00:22:47 Check angles 00:22:47 SkyScan query 00:22:48 SkyScan query done: ret=0 az=117.45<-7830 ze=-33.75<-14250 Statuses=0009 0009 00:22:48 Msec=1500 True Az=117.45 Ze=-33.75 Az status=0009 Ze status=0009 00:22:48 Check angles 00:22:48 SkyScan query 00:22:48 SkyScan query done: ret=0 az=100.08<-6672 ze=-51.57<-15438 Statuses=0009 0009 00:22:48 Msec=2250 True Az=100.08 Ze=-51.57 Az status=0009 Ze status=0009 00:22:49 Check angles 00:22:49 SkyScan query 00:22:49 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.525<-15435 Statuses=0009 0008 00:22:49 Msec=3000 True Az=86.055 Ze=-51.525 Az status=0009 Ze status=0008 00:22:49 Check angles 00:22:49 SkyScan query 00:22:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:22:50 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:22:50 Message to Master queued w/err=0: serial=47077 error=0 00:22:55 Received message from Master: op=Filter serial=47078 00:22:55 Color wheel filter change from 0 to 0 00:22:55 FLIGetFilterPos err=0 currentPosition=0 00:22:55 FLIGetStepsRemaining err=0 RemainingSteps=0 00:22:55 Filter is already there-color wheel unchanged 00:22:55 Received message from Master: op=Shutter serial=47079 00:22:55 Shutter LASER close 00:22:55 Received message from Camera: op=State serial=47081 00:22:55 GetSingleValue result=40 Value=cccccccc 00:22:55 SkyScan query 00:22:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:22:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:22:56 Parameters OK 00:22:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:22:56 Set A/D data flow result=40 00:22:56 Set A/D channel type result=40 00:22:56 Set A/D encoding result=40 00:22:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:22:56 Set channel filter=0.000000e+000 result=40 00:22:56 Config A/D Result=40 00:22:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:22:56 Get A/D filter: -9.255963e+061 result=40 00:22:56 Get A/D value=-858993460 result=40 00:22:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:22:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:22:56 Parameters OK 00:22:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:22:56 Set A/D data flow result=40 00:22:56 Set A/D channel type result=40 00:22:56 Set A/D encoding result=40 00:22:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:22:56 Set channel filter=0.000000e+000 result=40 00:22:56 Config A/D Result=40 00:22:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:22:56 Get A/D filter: -9.255963e+061 result=40 00:22:56 Get A/D value=-858993460 result=40 00:22:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:22:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:22:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:22:56 Aux= 00:22:56 Message to Camera, serial 47081 queued 00:23:33 Received message from Master: op=PointingHead serial=47094 00:23:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:23:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:23:33 Point started: ret=0 00:23:33 point_skyscan result=0 00:23:34 Check angles 00:23:34 SkyScan query 00:23:34 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.27<-17418 Statuses=0009 0009 00:23:34 Msec=0 True Az=108.99 Ze=-81.27 Az status=0009 Ze status=0009 00:23:34 Check angles 00:23:34 SkyScan query 00:23:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.225<-18815 Statuses=0008 0009 00:23:35 Msec=750 True Az=112.995 Ze=-102.225 Az status=0008 Ze status=0009 00:23:35 Check angles 00:23:35 SkyScan query 00:23:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.18<-20212 Statuses=0008 0009 00:23:36 Msec=1500 True Az=112.995 Ze=-123.18 Az status=0008 Ze status=0009 00:23:36 Check angles 00:23:36 SkyScan query 00:23:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.12<-21608 Statuses=0008 0009 00:23:37 Msec=2250 True Az=112.995 Ze=-144.12 Az status=0008 Ze status=0009 00:23:37 Check angles 00:23:37 SkyScan query 00:23:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.09<-23006 Statuses=0008 0009 00:23:37 Msec=3000 True Az=112.995 Ze=-165.09 Az status=0008 Ze status=0009 00:23:37 Check angles 00:23:37 SkyScan query 00:23:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:23:38 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:23:38 Message to Master queued w/err=0: serial=47094 error=0 00:23:43 Received message from Master: op=Filter serial=47095 00:23:43 Color wheel filter change from 0 to 0 00:23:43 FLIGetFilterPos err=0 currentPosition=0 00:23:43 FLIGetStepsRemaining err=0 RemainingSteps=0 00:23:43 Filter is already there-color wheel unchanged 00:23:43 Received message from Master: op=Shutter serial=47096 00:23:43 Shutter LASER open 00:23:43 Received message from Camera: op=State serial=47098 00:23:43 GetSingleValue result=40 Value=cccccccc 00:23:43 SkyScan query 00:23:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:23:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:23:44 Parameters OK 00:23:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:23:44 Set A/D data flow result=40 00:23:44 Set A/D channel type result=40 00:23:44 Set A/D encoding result=40 00:23:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:23:44 Set channel filter=0.000000e+000 result=40 00:23:44 Config A/D Result=40 00:23:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:23:44 Get A/D filter: -9.255963e+061 result=40 00:23:44 Get A/D value=-858993460 result=40 00:23:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:23:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:23:44 Parameters OK 00:23:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:23:44 Set A/D data flow result=40 00:23:44 Set A/D channel type result=40 00:23:44 Set A/D encoding result=40 00:23:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:23:44 Set channel filter=0.000000e+000 result=40 00:23:44 Config A/D Result=40 00:23:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:23:44 Get A/D filter: -9.255963e+061 result=40 00:23:44 Get A/D value=-858993460 result=40 00:23:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:23:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:23:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:23:44 Aux= 00:23:44 Message to Camera, serial 47098 queued 00:23:51 Received message from Master: op=Shutter serial=47107 00:23:51 Shutter LASER close 00:23:52 Received message from Master: op=PointingHead serial=47111 00:23:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:23:52 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:23:52 Point started: ret=0 00:23:52 point_skyscan result=0 00:23:53 Check angles 00:23:53 SkyScan query 00:23:54 SkyScan query done: ret=0 az=89.85<-5990 ze=157.095<-1527 Statuses=0009 0009 00:23:54 Msec=0 True Az=89.85 Ze=157.095 Az status=0009 Ze status=0009 00:23:54 Check angles 00:23:54 SkyScan query 00:23:54 SkyScan query done: ret=0 az=71.835<-4789 ze=135.69<-2954 Statuses=0009 0009 00:23:54 Msec=750 True Az=71.835 Ze=135.69 Az status=0009 Ze status=0009 00:23:55 Check angles 00:23:55 SkyScan query 00:23:55 SkyScan query done: ret=0 az=54.705<-3647 ze=114.735<-4351 Statuses=0009 0009 00:23:55 Msec=1500 True Az=54.705 Ze=114.735 Az status=0009 Ze status=0009 00:23:55 Check angles 00:23:55 SkyScan query 00:23:56 SkyScan query done: ret=0 az=40.92<-2728 ze=93.78<-5748 Statuses=0009 0009 00:23:56 Msec=2250 True Az=40.92 Ze=93.78 Az status=0009 Ze status=0009 00:23:56 Check angles 00:23:56 SkyScan query 00:23:57 SkyScan query done: ret=0 az=40.995<-2733 ze=72.825<-7145 Statuses=0008 0009 00:23:57 Msec=3000 True Az=40.995 Ze=72.825 Az status=0008 Ze status=0009 00:23:57 Check angles 00:23:57 SkyScan query 00:23:57 SkyScan query done: ret=0 az=40.995<-2733 ze=52.455<-8503 Statuses=0008 0009 00:23:57 Msec=3750 True Az=40.995 Ze=52.455 Az status=0008 Ze status=0009 00:23:58 Check angles 00:23:58 SkyScan query 00:23:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:23:58 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:23:58 Message to Master queued w/err=0: serial=47111 error=0 00:24:03 Received message from Master: op=Filter serial=47112 00:24:03 Color wheel filter change from 0 to 0 00:24:03 FLIGetFilterPos err=0 currentPosition=0 00:24:03 FLIGetStepsRemaining err=0 RemainingSteps=0 00:24:03 Filter is already there-color wheel unchanged 00:24:03 Received message from Master: op=Shutter serial=47113 00:24:03 Shutter LASER close 00:24:03 Received message from Camera: op=State serial=47115 00:24:03 GetSingleValue result=40 Value=cccccccc 00:24:03 SkyScan query 00:24:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:24:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:24:04 Parameters OK 00:24:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:24:04 Set A/D data flow result=40 00:24:04 Set A/D channel type result=40 00:24:04 Set A/D encoding result=40 00:24:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:24:04 Set channel filter=0.000000e+000 result=40 00:24:04 Config A/D Result=40 00:24:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:24:04 Get A/D filter: -9.255963e+061 result=40 00:24:04 Get A/D value=-858993460 result=40 00:24:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:24:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:24:04 Parameters OK 00:24:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:24:04 Set A/D data flow result=40 00:24:04 Set A/D channel type result=40 00:24:04 Set A/D encoding result=40 00:24:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:24:04 Set channel filter=0.000000e+000 result=40 00:24:04 Config A/D Result=40 00:24:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:24:04 Get A/D filter: -9.255963e+061 result=40 00:24:04 Get A/D value=-858993460 result=40 00:24:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:24:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:24:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:24:04 Aux= 00:24:04 Message to Camera, serial 47115 queued 00:24:41 Received message from Master: op=PointingHead serial=47128 00:24:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:24:41 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:24:41 Point started: ret=0 00:24:41 point_skyscan result=0 00:24:42 Check angles 00:24:42 SkyScan query 00:24:43 SkyScan query done: ret=0 az=40.995<-2733 ze=21.66<-10556 Statuses=0008 0009 00:24:43 Msec=0 True Az=40.995 Ze=21.66 Az status=0008 Ze status=0009 00:24:43 Check angles 00:24:43 SkyScan query 00:24:43 SkyScan query done: ret=0 az=40.995<-2733 ze=0.69<-11954 Statuses=0008 0009 00:24:43 Msec=750 True Az=40.995 Ze=0.69 Az status=0008 Ze status=0009 00:24:44 Check angles 00:24:44 SkyScan query 00:24:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.265<-13351 Statuses=0008 0009 00:24:44 Msec=1500 True Az=40.995 Ze=-20.265 Az status=0008 Ze status=0009 00:24:44 Check angles 00:24:44 SkyScan query 00:24:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0009 00:24:45 Msec=2250 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0009 00:24:45 Check angles 00:24:45 SkyScan query 00:24:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 00:24:46 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 00:24:46 Message to Master queued w/err=0: serial=47128 error=0 00:24:51 Received message from Master: op=Filter serial=47129 00:24:51 Color wheel filter change from 0 to 0 00:24:51 FLIGetFilterPos err=0 currentPosition=0 00:24:51 FLIGetStepsRemaining err=0 RemainingSteps=0 00:24:51 Filter is already there-color wheel unchanged 00:24:51 Received message from Master: op=Shutter serial=47130 00:24:51 Shutter LASER close 00:24:51 Received message from Camera: op=State serial=47132 00:24:51 GetSingleValue result=40 Value=cccccccc 00:24:51 SkyScan query 00:24:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:24:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:24:51 Parameters OK 00:24:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:24:51 Set A/D data flow result=40 00:24:51 Set A/D channel type result=40 00:24:51 Set A/D encoding result=40 00:24:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:24:51 Set channel filter=0.000000e+000 result=40 00:24:51 Config A/D Result=40 00:24:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:24:51 Get A/D filter: -9.255963e+061 result=40 00:24:51 Get A/D value=-858993460 result=40 00:24:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:24:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:24:51 Parameters OK 00:24:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:24:51 Set A/D data flow result=40 00:24:51 Set A/D channel type result=40 00:24:51 Set A/D encoding result=40 00:24:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:24:51 Set channel filter=0.000000e+000 result=40 00:24:51 Config A/D Result=40 00:24:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:24:51 Get A/D filter: -9.255963e+061 result=40 00:24:51 Get A/D value=-858993460 result=40 00:24:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:24:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:24:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:24:51 Aux= 00:24:51 Message to Camera, serial 47132 queued 00:25:28 Received message from Master: op=PointingHead serial=47145 00:25:28 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:25:28 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:25:29 Point started: ret=0 00:25:29 point_skyscan result=0 00:25:29 Check angles 00:25:29 SkyScan query 00:25:30 SkyScan query done: ret=0 az=64.14<-4276 ze=-68.535<-16569 Statuses=0009 0009 00:25:30 Msec=0 True Az=64.14 Ze=-68.535 Az status=0009 Ze status=0009 00:25:30 Check angles 00:25:30 SkyScan query 00:25:31 SkyScan query done: ret=0 az=82.08<-5472 ze=-89.925<-17995 Statuses=0009 0009 00:25:31 Msec=750 True Az=82.08 Ze=-89.925 Az status=0009 Ze status=0009 00:25:31 Check angles 00:25:31 SkyScan query 00:25:32 SkyScan query done: ret=0 az=99.585<-6639 ze=-110.895<-19393 Statuses=0009 0009 00:25:32 Msec=1500 True Az=99.585 Ze=-110.895 Az status=0009 Ze status=0009 00:25:32 Check angles 00:25:32 SkyScan query 00:25:32 SkyScan query done: ret=0 az=117.03<-7802 ze=-131.82<-20788 Statuses=0009 0009 00:25:32 Msec=2250 True Az=117.03 Ze=-131.82 Az status=0009 Ze status=0009 00:25:32 Check angles 00:25:32 SkyScan query 00:25:33 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 00:25:33 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 00:25:33 Check angles 00:25:33 SkyScan query 00:25:34 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:25:34 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:25:34 Message to Master queued w/err=0: serial=47145 error=0 00:25:39 Received message from Master: op=Filter serial=47146 00:25:39 Color wheel filter change from 0 to 0 00:25:39 FLIGetFilterPos err=0 currentPosition=0 00:25:39 FLIGetStepsRemaining err=0 RemainingSteps=0 00:25:39 Filter is already there-color wheel unchanged 00:25:39 Received message from Master: op=Shutter serial=47147 00:25:39 Shutter LASER close 00:25:39 Received message from Camera: op=State serial=47149 00:25:39 GetSingleValue result=40 Value=cccccccc 00:25:39 SkyScan query 00:25:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:25:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:25:40 Parameters OK 00:25:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:25:40 Set A/D data flow result=40 00:25:40 Set A/D channel type result=40 00:25:40 Set A/D encoding result=40 00:25:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:25:40 Set channel filter=0.000000e+000 result=40 00:25:40 Config A/D Result=40 00:25:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:25:40 Get A/D filter: -9.255963e+061 result=40 00:25:40 Get A/D value=-858993460 result=40 00:25:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:25:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:25:40 Parameters OK 00:25:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:25:40 Set A/D data flow result=40 00:25:40 Set A/D channel type result=40 00:25:40 Set A/D encoding result=40 00:25:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:25:40 Set channel filter=0.000000e+000 result=40 00:25:40 Config A/D Result=40 00:25:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:25:40 Get A/D filter: -9.255963e+061 result=40 00:25:40 Get A/D value=-858993460 result=40 00:25:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:25:40 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:25:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:25:40 Aux= 00:25:40 Message to Camera, serial 47149 queued 00:26:16 Received message from Master: op=PointingHead serial=47162 00:26:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:26:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:26:17 Point started: ret=0 00:26:17 point_skyscan result=0 00:26:17 Check angles 00:26:17 SkyScan query 00:26:18 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.24<-23416 Statuses=0009 0009 00:26:18 Msec=0 True Az=113.01 Ze=-171.24 Az status=0009 Ze status=0009 00:26:18 Check angles 00:26:18 SkyScan query 00:26:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:26:19 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:26:19 Message to Master queued w/err=0: serial=47162 error=0 00:26:24 Received message from Master: op=Filter serial=47163 [UTC 2018-12-11 00:26:24] 00:26:24 Color wheel filter change from 0 to 0 00:26:24 FLIGetFilterPos err=0 currentPosition=0 00:26:24 FLIGetStepsRemaining err=0 RemainingSteps=0 00:26:24 Filter is already there-color wheel unchanged 00:26:24 Received message from Master: op=Shutter serial=47164 00:26:24 Shutter LASER open 00:26:24 Received message from Camera: op=State serial=47166 00:26:24 GetSingleValue result=40 Value=cccccccc 00:26:24 SkyScan query 00:26:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:26:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:26:25 Parameters OK 00:26:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:26:25 Set A/D data flow result=40 00:26:25 Set A/D channel type result=40 00:26:25 Set A/D encoding result=40 00:26:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:26:25 Set channel filter=0.000000e+000 result=40 00:26:25 Config A/D Result=40 00:26:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:26:25 Get A/D filter: -9.255963e+061 result=40 00:26:25 Get A/D value=-858993460 result=40 00:26:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:26:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:26:25 Parameters OK 00:26:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:26:25 Set A/D data flow result=40 00:26:25 Set A/D channel type result=40 00:26:25 Set A/D encoding result=40 00:26:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:26:25 Set channel filter=0.000000e+000 result=40 00:26:25 Config A/D Result=40 00:26:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:26:25 Get A/D filter: -9.255963e+061 result=40 00:26:25 Get A/D value=-858993460 result=40 00:26:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:26:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:26:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:26:25 Aux= 00:26:25 Message to Camera, serial 47166 queued 00:26:33 Received message from Master: op=Shutter serial=47176 00:26:33 Shutter LASER close 00:26:34 Received message from Master: op=PointingHead serial=47180 00:26:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:26:34 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:26:34 Point started: ret=0 00:26:34 point_skyscan result=0 00:26:35 Check angles 00:26:35 SkyScan query 00:26:36 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.74<-21516 Statuses=0009 0009 00:26:36 Msec=0 True Az=136.35 Ze=-142.74 Az status=0009 Ze status=0009 00:26:36 Check angles 00:26:36 SkyScan query 00:26:36 SkyScan query done: ret=0 az=153.84<-10256 ze=-121.77<-20118 Statuses=0009 0009 00:26:36 Msec=750 True Az=153.84 Ze=-121.77 Az status=0009 Ze status=0009 00:26:36 Check angles 00:26:36 SkyScan query 00:26:37 SkyScan query done: ret=0 az=171.39<-11426 ze=-100.815<-18721 Statuses=0009 0009 00:26:37 Msec=1500 True Az=171.39 Ze=-100.815 Az status=0009 Ze status=0009 00:26:37 Check angles 00:26:37 SkyScan query 00:26:38 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.92<-17328 Statuses=0008 0009 00:26:38 Msec=2250 True Az=176.025 Ze=-79.92 Az status=0008 Ze status=0009 00:26:38 Check angles 00:26:38 SkyScan query 00:26:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.95<-15930 Statuses=0008 0009 00:26:39 Msec=3000 True Az=175.995 Ze=-58.95 Az status=0008 Ze status=0009 00:26:39 Check angles 00:26:39 SkyScan query 00:26:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:26:39 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:26:39 Message to Master queued w/err=0: serial=47180 error=0 00:26:44 Received message from Master: op=Filter serial=47181 00:26:44 Color wheel filter change from 0 to 0 00:26:44 FLIGetFilterPos err=0 currentPosition=0 00:26:44 FLIGetStepsRemaining err=0 RemainingSteps=0 00:26:44 Filter is already there-color wheel unchanged 00:26:44 Received message from Master: op=Shutter serial=47182 00:26:44 Shutter LASER close 00:26:45 Received message from Camera: op=State serial=47184 00:26:45 GetSingleValue result=40 Value=cccccccc 00:26:45 SkyScan query 00:26:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:26:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:26:45 Parameters OK 00:26:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:26:45 Set A/D data flow result=40 00:26:45 Set A/D channel type result=40 00:26:45 Set A/D encoding result=40 00:26:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:26:45 Set channel filter=0.000000e+000 result=40 00:26:45 Config A/D Result=40 00:26:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:26:45 Get A/D filter: -9.255963e+061 result=40 00:26:45 Get A/D value=-858993460 result=40 00:26:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:26:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:26:45 Parameters OK 00:26:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:26:45 Set A/D data flow result=40 00:26:45 Set A/D channel type result=40 00:26:45 Set A/D encoding result=40 00:26:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:26:45 Set channel filter=0.000000e+000 result=40 00:26:45 Config A/D Result=40 00:26:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:26:45 Get A/D filter: -9.255963e+061 result=40 00:26:45 Get A/D value=-858993460 result=40 00:26:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:26:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:26:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:26:45 Aux= 00:26:45 Message to Camera, serial 47184 queued 00:27:22 Received message from Master: op=PointingHead serial=47197 00:27:22 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:27:22 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:27:22 Point started: ret=0 00:27:22 point_skyscan result=0 00:27:23 Check angles 00:27:23 SkyScan query 00:27:24 SkyScan query done: ret=0 az=152.685<-10179 ze=-21.39<-13426 Statuses=0009 0009 00:27:24 Msec=0 True Az=152.685 Ze=-21.39 Az status=0009 Ze status=0009 00:27:24 Check angles 00:27:24 SkyScan query 00:27:24 SkyScan query done: ret=0 az=135.21<-9014 ze=-0.39<-12026 Statuses=0009 0009 00:27:24 Msec=750 True Az=135.21 Ze=-0.39 Az status=0009 Ze status=0009 00:27:25 Check angles 00:27:25 SkyScan query 00:27:25 SkyScan query done: ret=0 az=117.255<-7817 ze=20.97<-10602 Statuses=0009 0009 00:27:25 Msec=1500 True Az=117.255 Ze=20.97 Az status=0009 Ze status=0009 00:27:25 Check angles 00:27:25 SkyScan query 00:27:26 SkyScan query done: ret=0 az=99.585<-6639 ze=42.39<-9174 Statuses=0009 0009 00:27:26 Msec=2250 True Az=99.585 Ze=42.39 Az status=0009 Ze status=0009 00:27:26 Check angles 00:27:26 SkyScan query 00:27:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 00:27:27 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 00:27:27 Check angles 00:27:27 SkyScan query 00:27:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:27:28 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 00:27:28 Message to Master queued w/err=0: serial=47197 error=0 00:27:33 Received message from Master: op=Filter serial=47198 00:27:33 Color wheel filter change from 0 to 0 00:27:33 FLIGetFilterPos err=0 currentPosition=0 00:27:33 FLIGetStepsRemaining err=0 RemainingSteps=0 00:27:33 Filter is already there-color wheel unchanged 00:27:33 Received message from Master: op=Shutter serial=47199 00:27:33 Shutter LASER close 00:27:33 Received message from Camera: op=State serial=47201 00:27:33 GetSingleValue result=40 Value=cccccccc 00:27:33 SkyScan query 00:27:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:27:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:27:33 Parameters OK 00:27:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:27:33 Set A/D data flow result=40 00:27:33 Set A/D channel type result=40 00:27:33 Set A/D encoding result=40 00:27:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:27:33 Set channel filter=0.000000e+000 result=40 00:27:33 Config A/D Result=40 00:27:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:27:33 Get A/D filter: -9.255963e+061 result=40 00:27:33 Get A/D value=-858993460 result=40 00:27:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:27:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:27:33 Parameters OK 00:27:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:27:33 Set A/D data flow result=40 00:27:33 Set A/D channel type result=40 00:27:33 Set A/D encoding result=40 00:27:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:27:33 Set channel filter=0.000000e+000 result=40 00:27:33 Config A/D Result=40 00:27:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:27:33 Get A/D filter: -9.255963e+061 result=40 00:27:33 Get A/D value=-858993460 result=40 00:27:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:27:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:27:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:27:33 Aux= 00:27:33 Message to Camera, serial 47201 queued 00:28:10 Received message from Master: op=PointingHead serial=47214 00:28:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:28:10 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:28:11 Point started: ret=0 00:28:11 point_skyscan result=0 00:28:11 Check angles 00:28:11 SkyScan query 00:28:12 SkyScan query done: ret=0 az=108.765<-7251 ze=38.49<-9434 Statuses=0009 0008 00:28:12 Msec=0 True Az=108.765 Ze=38.49 Az status=0009 Ze status=0008 00:28:12 Check angles 00:28:12 SkyScan query 00:28:13 SkyScan query done: ret=0 az=126.315<-8421 ze=38.505<-9433 Statuses=0009 0008 00:28:13 Msec=750 True Az=126.315 Ze=38.505 Az status=0009 Ze status=0008 00:28:13 Check angles 00:28:13 SkyScan query 00:28:13 SkyScan query done: ret=0 az=143.835<-9589 ze=38.505<-9433 Statuses=0009 0008 00:28:13 Msec=1500 True Az=143.835 Ze=38.505 Az status=0009 Ze status=0008 00:28:14 Check angles 00:28:14 SkyScan query 00:28:14 SkyScan query done: ret=0 az=161.055<-10737 ze=38.505<-9433 Statuses=0009 0008 00:28:14 Msec=2250 True Az=161.055 Ze=38.505 Az status=0009 Ze status=0008 00:28:14 Check angles 00:28:14 SkyScan query 00:28:15 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 00:28:15 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 00:28:15 Check angles 00:28:15 SkyScan query 00:28:16 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:28:16 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:28:16 Message to Master queued w/err=0: serial=47214 error=0 00:28:21 Received message from Master: op=Filter serial=47215 00:28:21 Color wheel filter change from 0 to 0 00:28:21 FLIGetFilterPos err=0 currentPosition=0 00:28:21 FLIGetStepsRemaining err=0 RemainingSteps=0 00:28:21 Filter is already there-color wheel unchanged 00:28:21 Received message from Master: op=Shutter serial=47216 00:28:21 Shutter LASER close 00:28:21 Received message from Camera: op=State serial=47218 00:28:21 GetSingleValue result=40 Value=cccccccc 00:28:21 SkyScan query 00:28:21 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:28:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:28:21 Parameters OK 00:28:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:28:21 Set A/D data flow result=40 00:28:21 Set A/D channel type result=40 00:28:21 Set A/D encoding result=40 00:28:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:28:21 Set channel filter=0.000000e+000 result=40 00:28:21 Config A/D Result=40 00:28:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:28:21 Get A/D filter: -9.255963e+061 result=40 00:28:21 Get A/D value=-858993460 result=40 00:28:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:28:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:28:21 Parameters OK 00:28:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:28:21 Set A/D data flow result=40 00:28:21 Set A/D channel type result=40 00:28:21 Set A/D encoding result=40 00:28:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:28:21 Set channel filter=0.000000e+000 result=40 00:28:21 Config A/D Result=40 00:28:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:28:21 Get A/D filter: -9.255963e+061 result=40 00:28:21 Get A/D value=-858993460 result=40 00:28:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:28:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:28:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:28:21 Aux= 00:28:21 Message to Camera, serial 47218 queued 00:28:58 Received message from Master: op=PointingHead serial=47231 00:28:58 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:28:58 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:28:59 Point started: ret=0 00:28:59 point_skyscan result=0 00:28:59 Check angles 00:28:59 SkyScan query 00:29:00 SkyScan query done: ret=0 az=152.61<-10174 ze=8.19<-11454 Statuses=0009 0009 00:29:00 Msec=0 True Az=152.61 Ze=8.19 Az status=0009 Ze status=0009 00:29:00 Check angles 00:29:00 SkyScan query 00:29:01 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.765<-12851 Statuses=0009 0009 00:29:01 Msec=750 True Az=135.135 Ze=-12.765 Az status=0009 Ze status=0009 00:29:01 Check angles 00:29:01 SkyScan query 00:29:01 SkyScan query done: ret=0 az=117.09<-7806 ze=-34.14<-14276 Statuses=0009 0009 00:29:01 Msec=1500 True Az=117.09 Ze=-34.14 Az status=0009 Ze status=0009 00:29:02 Check angles 00:29:02 SkyScan query 00:29:02 SkyScan query done: ret=0 az=99.525<-6635 ze=-51.57<-15438 Statuses=0009 0009 00:29:02 Msec=2250 True Az=99.525 Ze=-51.57 Az status=0009 Ze status=0009 00:29:02 Check angles 00:29:02 SkyScan query 00:29:03 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 00:29:03 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 00:29:03 Check angles 00:29:03 SkyScan query 00:29:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:29:04 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:29:04 Message to Master queued w/err=0: serial=47231 error=0 00:29:09 Received message from Master: op=Filter serial=47232 00:29:09 Color wheel filter change from 0 to 0 00:29:09 FLIGetFilterPos err=0 currentPosition=0 00:29:09 FLIGetStepsRemaining err=0 RemainingSteps=0 00:29:09 Filter is already there-color wheel unchanged 00:29:09 Received message from Master: op=Shutter serial=47233 00:29:09 Shutter LASER close 00:29:09 Received message from Camera: op=State serial=47235 00:29:09 GetSingleValue result=40 Value=cccccccc 00:29:09 SkyScan query 00:29:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:29:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:29:10 Parameters OK 00:29:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:29:10 Set A/D data flow result=40 00:29:10 Set A/D channel type result=40 00:29:10 Set A/D encoding result=40 00:29:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:29:10 Set channel filter=0.000000e+000 result=40 00:29:10 Config A/D Result=40 00:29:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:29:10 Get A/D filter: -9.255963e+061 result=40 00:29:10 Get A/D value=-858993460 result=40 00:29:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:29:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:29:10 Parameters OK 00:29:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:29:10 Set A/D data flow result=40 00:29:10 Set A/D channel type result=40 00:29:10 Set A/D encoding result=40 00:29:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:29:10 Set channel filter=0.000000e+000 result=40 00:29:10 Config A/D Result=40 00:29:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:29:10 Get A/D filter: -9.255963e+061 result=40 00:29:10 Get A/D value=-858993460 result=40 00:29:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:29:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:29:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:29:10 Aux= 00:29:10 Message to Camera, serial 47235 queued 00:29:46 Received message from Master: op=PointingHead serial=47248 00:29:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:29:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:29:47 Point started: ret=0 00:29:47 point_skyscan result=0 00:29:47 Check angles 00:29:47 SkyScan query 00:29:48 SkyScan query done: ret=0 az=109.65<-7310 ze=-81.87<-17458 Statuses=0009 0009 00:29:48 Msec=0 True Az=109.65 Ze=-81.87 Az status=0009 Ze status=0009 00:29:48 Check angles 00:29:48 SkyScan query 00:29:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.84<-18856 Statuses=0008 0009 00:29:49 Msec=750 True Az=112.995 Ze=-102.84 Az status=0008 Ze status=0009 00:29:49 Check angles 00:29:49 SkyScan query 00:29:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.245<-20283 Statuses=0008 0009 00:29:50 Msec=1500 True Az=112.995 Ze=-124.245 Az status=0008 Ze status=0009 00:29:50 Check angles 00:29:50 SkyScan query 00:29:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.185<-21679 Statuses=0008 0009 00:29:50 Msec=2250 True Az=112.995 Ze=-145.185 Az status=0008 Ze status=0009 00:29:51 Check angles 00:29:51 SkyScan query 00:29:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.125<-23075 Statuses=0008 0009 00:29:51 Msec=3000 True Az=112.995 Ze=-166.125 Az status=0008 Ze status=0009 00:29:51 Check angles 00:29:51 SkyScan query 00:29:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:29:52 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:29:52 Message to Master queued w/err=0: serial=47248 error=0 00:29:57 Received message from Master: op=Filter serial=47249 00:29:57 Color wheel filter change from 0 to 0 00:29:57 FLIGetFilterPos err=0 currentPosition=0 00:29:57 FLIGetStepsRemaining err=0 RemainingSteps=0 00:29:57 Filter is already there-color wheel unchanged 00:29:57 Received message from Master: op=Shutter serial=47250 00:29:57 Shutter LASER open 00:29:57 Received message from Camera: op=State serial=47252 00:29:57 GetSingleValue result=40 Value=cccccccc 00:29:57 SkyScan query 00:29:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:29:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:29:58 Parameters OK 00:29:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:29:58 Set A/D data flow result=40 00:29:58 Set A/D channel type result=40 00:29:58 Set A/D encoding result=40 00:29:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:29:58 Set channel filter=0.000000e+000 result=40 00:29:58 Config A/D Result=40 00:29:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:29:58 Get A/D filter: -9.255963e+061 result=40 00:29:58 Get A/D value=-858993460 result=40 00:29:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:29:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:29:58 Parameters OK 00:29:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:29:58 Set A/D data flow result=40 00:29:58 Set A/D channel type result=40 00:29:58 Set A/D encoding result=40 00:29:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:29:58 Set channel filter=0.000000e+000 result=40 00:29:58 Config A/D Result=40 00:29:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:29:58 Get A/D filter: -9.255963e+061 result=40 00:29:58 Get A/D value=-858993460 result=40 00:29:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:29:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:29:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:29:58 Aux= 00:29:58 Message to Camera, serial 47252 queued 00:30:05 Received message from Master: op=Shutter serial=47261 00:30:05 Shutter LASER close 00:30:06 Received message from Master: op=PointingHead serial=47265 00:30:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:30:06 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:30:06 Point started: ret=0 00:30:06 point_skyscan result=0 00:30:07 Check angles 00:30:07 SkyScan query 00:30:07 SkyScan query done: ret=0 az=90.18<-6012 ze=157.5<-1500 Statuses=0009 0009 00:30:07 Msec=0 True Az=90.18 Ze=157.5 Az status=0009 Ze status=0009 00:30:08 Check angles 00:30:08 SkyScan query 00:30:08 SkyScan query done: ret=0 az=72.3<-4820 ze=136.095<-2927 Statuses=0009 0009 00:30:08 Msec=750 True Az=72.3 Ze=136.095 Az status=0009 Ze status=0009 00:30:08 Check angles 00:30:08 SkyScan query 00:30:09 SkyScan query done: ret=0 az=54.99<-3666 ze=115.065<-4329 Statuses=0009 0009 00:30:09 Msec=1500 True Az=54.99 Ze=115.065 Az status=0009 Ze status=0009 00:30:09 Check angles 00:30:09 SkyScan query 00:30:10 SkyScan query done: ret=0 az=40.86<-2724 ze=94.17<-5722 Statuses=0009 0009 00:30:10 Msec=2250 True Az=40.86 Ze=94.17 Az status=0009 Ze status=0009 00:30:10 Check angles 00:30:10 SkyScan query 00:30:10 SkyScan query done: ret=0 az=40.995<-2733 ze=73.245<-7117 Statuses=0008 0009 00:30:10 Msec=3000 True Az=40.995 Ze=73.245 Az status=0008 Ze status=0009 00:30:11 Check angles 00:30:11 SkyScan query 00:30:11 SkyScan query done: ret=0 az=40.995<-2733 ze=52.455<-8503 Statuses=0008 0009 00:30:11 Msec=3750 True Az=40.995 Ze=52.455 Az status=0008 Ze status=0009 00:30:11 Check angles 00:30:11 SkyScan query 00:30:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:30:12 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:30:12 Message to Master queued w/err=0: serial=47265 error=0 00:30:17 Received message from Master: op=Filter serial=47266 00:30:17 Color wheel filter change from 0 to 0 00:30:17 FLIGetFilterPos err=0 currentPosition=0 00:30:17 FLIGetStepsRemaining err=0 RemainingSteps=0 00:30:17 Filter is already there-color wheel unchanged 00:30:17 Received message from Master: op=Shutter serial=47267 00:30:17 Shutter LASER close 00:30:17 Received message from Camera: op=State serial=47269 00:30:17 GetSingleValue result=40 Value=cccccccc 00:30:17 SkyScan query 00:30:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:30:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:30:18 Parameters OK 00:30:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:30:18 Set A/D data flow result=40 00:30:18 Set A/D channel type result=40 00:30:18 Set A/D encoding result=40 00:30:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:30:18 Set channel filter=0.000000e+000 result=40 00:30:18 Config A/D Result=40 00:30:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:30:18 Get A/D filter: -9.255963e+061 result=40 00:30:18 Get A/D value=-858993460 result=40 00:30:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:30:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:30:18 Parameters OK 00:30:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:30:18 Set A/D data flow result=40 00:30:18 Set A/D channel type result=40 00:30:18 Set A/D encoding result=40 00:30:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:30:18 Set channel filter=0.000000e+000 result=40 00:30:18 Config A/D Result=40 00:30:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:30:18 Get A/D filter: -9.255963e+061 result=40 00:30:18 Get A/D value=-858993460 result=40 00:30:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:30:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:30:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:30:18 Aux= 00:30:18 Message to Camera, serial 47269 queued 00:30:55 Received message from Master: op=PointingHead serial=47282 00:30:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:30:55 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:30:55 Point started: ret=0 00:30:55 point_skyscan result=0 00:30:56 Check angles 00:30:56 SkyScan query 00:30:56 SkyScan query done: ret=0 az=40.995<-2733 ze=21.585<-10561 Statuses=0008 0009 00:30:56 Msec=0 True Az=40.995 Ze=21.585 Az status=0008 Ze status=0009 00:30:57 Check angles 00:30:57 SkyScan query 00:30:57 SkyScan query done: ret=0 az=40.995<-2733 ze=0.6<-11960 Statuses=0008 0009 00:30:57 Msec=750 True Az=40.995 Ze=0.6 Az status=0008 Ze status=0009 00:30:57 Check angles 00:30:57 SkyScan query 00:30:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.34<-13356 Statuses=0008 0009 00:30:58 Msec=1500 True Az=40.995 Ze=-20.34 Az status=0008 Ze status=0009 00:30:58 Check angles 00:30:58 SkyScan query 00:30:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0009 00:30:59 Msec=2250 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0009 00:30:59 Check angles 00:30:59 SkyScan query 00:30:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 00:30:59 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 00:30:59 Message to Master queued w/err=0: serial=47282 error=0 00:31:04 Received message from Master: op=Filter serial=47283 00:31:04 Color wheel filter change from 0 to 0 00:31:04 FLIGetFilterPos err=0 currentPosition=0 00:31:04 FLIGetStepsRemaining err=0 RemainingSteps=0 00:31:04 Filter is already there-color wheel unchanged 00:31:05 Received message from Master: op=Shutter serial=47284 00:31:05 Shutter LASER close 00:31:05 Received message from Camera: op=State serial=47286 00:31:05 GetSingleValue result=40 Value=cccccccc 00:31:05 SkyScan query 00:31:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:31:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:31:05 Parameters OK 00:31:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:31:05 Set A/D data flow result=40 00:31:05 Set A/D channel type result=40 00:31:05 Set A/D encoding result=40 00:31:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:31:05 Set channel filter=0.000000e+000 result=40 00:31:05 Config A/D Result=40 00:31:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:31:05 Get A/D filter: -9.255963e+061 result=40 00:31:05 Get A/D value=-858993460 result=40 00:31:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:31:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:31:05 Parameters OK 00:31:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:31:05 Set A/D data flow result=40 00:31:05 Set A/D channel type result=40 00:31:05 Set A/D encoding result=40 00:31:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:31:05 Set channel filter=0.000000e+000 result=40 00:31:05 Config A/D Result=40 00:31:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:31:05 Get A/D filter: -9.255963e+061 result=40 00:31:05 Get A/D value=-858993460 result=40 00:31:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:31:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:31:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:31:05 Aux= 00:31:05 Message to Camera, serial 47286 queued 00:31:42 Received message from Master: op=PointingHead serial=47299 00:31:42 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:31:42 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:31:42 Point started: ret=0 00:31:42 point_skyscan result=0 00:31:43 Check angles 00:31:43 SkyScan query 00:31:44 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.55<-16570 Statuses=0009 0009 00:31:44 Msec=0 True Az=64.17 Ze=-68.55 Az status=0009 Ze status=0009 00:31:44 Check angles 00:31:44 SkyScan query 00:31:44 SkyScan query done: ret=0 az=81.78<-5452 ze=-89.505<-17967 Statuses=0009 0009 00:31:44 Msec=750 True Az=81.78 Ze=-89.505 Az status=0009 Ze status=0009 00:31:45 Check angles 00:31:45 SkyScan query 00:31:45 SkyScan query done: ret=0 az=99.21<-6614 ze=-110.46<-19364 Statuses=0009 0009 00:31:45 Msec=1500 True Az=99.21 Ze=-110.46 Az status=0009 Ze status=0009 00:31:45 Check angles 00:31:45 SkyScan query 00:31:46 SkyScan query done: ret=0 az=117.045<-7803 ze=-131.865<-20791 Statuses=0009 0009 00:31:46 Msec=2250 True Az=117.045 Ze=-131.865 Az status=0009 Ze status=0009 00:31:46 Check angles 00:31:46 SkyScan query 00:31:47 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 00:31:47 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 00:31:47 Check angles 00:31:47 SkyScan query 00:31:48 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:31:48 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:31:48 Message to Master queued w/err=0: serial=47299 error=0 00:31:53 Received message from Master: op=Filter serial=47300 00:31:53 Color wheel filter change from 0 to 0 00:31:53 FLIGetFilterPos err=0 currentPosition=0 00:31:53 FLIGetStepsRemaining err=0 RemainingSteps=0 00:31:53 Filter is already there-color wheel unchanged 00:31:53 Received message from Master: op=Shutter serial=47301 00:31:53 Shutter LASER close 00:31:53 Received message from Camera: op=State serial=47303 00:31:53 GetSingleValue result=40 Value=cccccccc 00:31:53 SkyScan query 00:31:53 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:31:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:31:53 Parameters OK 00:31:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:31:53 Set A/D data flow result=40 00:31:53 Set A/D channel type result=40 00:31:53 Set A/D encoding result=40 00:31:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:31:53 Set channel filter=0.000000e+000 result=40 00:31:53 Config A/D Result=40 00:31:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:31:53 Get A/D filter: -9.255963e+061 result=40 00:31:53 Get A/D value=-858993460 result=40 00:31:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:31:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:31:53 Parameters OK 00:31:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:31:53 Set A/D data flow result=40 00:31:53 Set A/D channel type result=40 00:31:53 Set A/D encoding result=40 00:31:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:31:53 Set channel filter=0.000000e+000 result=40 00:31:53 Config A/D Result=40 00:31:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:31:53 Get A/D filter: -9.255963e+061 result=40 00:31:53 Get A/D value=-858993460 result=40 00:31:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:31:53 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:31:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:31:53 Aux= 00:31:53 Message to Camera, serial 47303 queued 00:32:30 Received message from Master: op=PointingHead serial=47316 00:32:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:32:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:32:30 Point started: ret=0 00:32:30 point_skyscan result=0 00:32:31 Check angles 00:32:31 SkyScan query 00:32:32 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.495<-23433 Statuses=0009 0009 00:32:32 Msec=0 True Az=113.01 Ze=-171.495 Az status=0009 Ze status=0009 00:32:32 Check angles 00:32:32 SkyScan query 00:32:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:32:33 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:32:33 Message to Master queued w/err=0: serial=47316 error=0 00:32:38 Received message from Master: op=Filter serial=47317 00:32:38 Color wheel filter change from 0 to 0 00:32:38 FLIGetFilterPos err=0 currentPosition=0 00:32:38 FLIGetStepsRemaining err=0 RemainingSteps=0 00:32:38 Filter is already there-color wheel unchanged 00:32:38 Received message from Master: op=Shutter serial=47318 00:32:38 Shutter LASER open 00:32:38 Received message from Camera: op=State serial=47320 00:32:38 GetSingleValue result=40 Value=cccccccc 00:32:38 SkyScan query 00:32:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:32:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:32:39 Parameters OK 00:32:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:32:39 Set A/D data flow result=40 00:32:39 Set A/D channel type result=40 00:32:39 Set A/D encoding result=40 00:32:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:32:39 Set channel filter=0.000000e+000 result=40 00:32:39 Config A/D Result=40 00:32:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:32:39 Get A/D filter: -9.255963e+061 result=40 00:32:39 Get A/D value=-858993460 result=40 00:32:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:32:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:32:39 Parameters OK 00:32:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:32:39 Set A/D data flow result=40 00:32:39 Set A/D channel type result=40 00:32:39 Set A/D encoding result=40 00:32:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:32:39 Set channel filter=0.000000e+000 result=40 00:32:39 Config A/D Result=40 00:32:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:32:39 Get A/D filter: -9.255963e+061 result=40 00:32:39 Get A/D value=-858993460 result=40 00:32:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:32:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:32:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:32:39 Aux= 00:32:39 Message to Camera, serial 47320 queued 00:32:46 Received message from Master: op=Shutter serial=47329 00:32:46 Shutter LASER close 00:32:47 Received message from Master: op=PointingHead serial=47333 00:32:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:32:47 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:32:47 Point started: ret=0 00:32:47 point_skyscan result=0 00:32:48 Check angles 00:32:48 SkyScan query 00:32:48 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.355<-21557 Statuses=0009 0009 00:32:48 Msec=0 True Az=135.825 Ze=-143.355 Az status=0009 Ze status=0009 00:32:48 Check angles 00:32:48 SkyScan query 00:32:49 SkyScan query done: ret=0 az=153.285<-10219 ze=-122.4<-20160 Statuses=0009 0009 00:32:49 Msec=750 True Az=153.285 Ze=-122.4 Az status=0009 Ze status=0009 00:32:49 Check angles 00:32:49 SkyScan query 00:32:50 SkyScan query done: ret=0 az=171.21<-11414 ze=-101.055<-18737 Statuses=0009 0009 00:32:50 Msec=1500 True Az=171.21 Ze=-101.055 Az status=0009 Ze status=0009 00:32:50 Check angles 00:32:50 SkyScan query 00:32:51 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.07<-17338 Statuses=0008 0009 00:32:51 Msec=2250 True Az=176.025 Ze=-80.07 Az status=0008 Ze status=0009 00:32:51 Check angles 00:32:51 SkyScan query 00:32:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.13<-15942 Statuses=0008 0009 00:32:51 Msec=3000 True Az=176.01 Ze=-59.13 Az status=0008 Ze status=0009 00:32:51 Check angles 00:32:51 SkyScan query 00:32:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:32:52 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:32:52 Message to Master queued w/err=0: serial=47333 error=0 00:32:57 Received message from Master: op=Filter serial=47334 00:32:57 Color wheel filter change from 0 to 0 00:32:57 FLIGetFilterPos err=0 currentPosition=0 00:32:57 FLIGetStepsRemaining err=0 RemainingSteps=0 00:32:57 Filter is already there-color wheel unchanged 00:32:57 Received message from Master: op=Shutter serial=47335 00:32:57 Shutter LASER close 00:32:57 Received message from Camera: op=State serial=47337 00:32:57 GetSingleValue result=40 Value=cccccccc 00:32:57 SkyScan query 00:32:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:32:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:32:58 Parameters OK 00:32:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:32:58 Set A/D data flow result=40 00:32:58 Set A/D channel type result=40 00:32:58 Set A/D encoding result=40 00:32:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:32:58 Set channel filter=0.000000e+000 result=40 00:32:58 Config A/D Result=40 00:32:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:32:58 Get A/D filter: -9.255963e+061 result=40 00:32:58 Get A/D value=-858993460 result=40 00:32:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:32:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:32:58 Parameters OK 00:32:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:32:58 Set A/D data flow result=40 00:32:58 Set A/D channel type result=40 00:32:58 Set A/D encoding result=40 00:32:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:32:58 Set channel filter=0.000000e+000 result=40 00:32:58 Config A/D Result=40 00:32:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:32:58 Get A/D filter: -9.255963e+061 result=40 00:32:58 Get A/D value=-858993460 result=40 00:32:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:32:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:32:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:32:58 Aux= 00:32:58 Message to Camera, serial 47337 queued 00:33:35 Received message from Master: op=PointingHead serial=47350 00:33:35 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:33:35 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:33:35 Point started: ret=0 00:33:35 point_skyscan result=0 00:33:36 Check angles 00:33:36 SkyScan query 00:33:36 SkyScan query done: ret=0 az=152.805<-10187 ze=-21.66<-13444 Statuses=0009 0009 00:33:36 Msec=0 True Az=152.805 Ze=-21.66 Az status=0009 Ze status=0009 00:33:37 Check angles 00:33:37 SkyScan query 00:33:37 SkyScan query done: ret=0 az=135.465<-9031 ze=-0.615<-12041 Statuses=0009 0009 00:33:37 Msec=750 True Az=135.465 Ze=-0.615 Az status=0009 Ze status=0009 00:33:37 Check angles 00:33:37 SkyScan query 00:33:38 SkyScan query done: ret=0 az=117.78<-7852 ze=20.31<-10646 Statuses=0009 0009 00:33:38 Msec=1500 True Az=117.78 Ze=20.31 Az status=0009 Ze status=0009 00:33:38 Check angles 00:33:38 SkyScan query 00:33:39 SkyScan query done: ret=0 az=100.305<-6687 ze=41.28<-9248 Statuses=0009 0009 00:33:39 Msec=2250 True Az=100.305 Ze=41.28 Az status=0009 Ze status=0009 00:33:39 Check angles 00:33:39 SkyScan query 00:33:39 SkyScan query done: ret=0 az=86.04<-5736 ze=51.54<-8564 Statuses=0009 0008 00:33:39 Msec=3000 True Az=86.04 Ze=51.54 Az status=0009 Ze status=0008 00:33:40 Check angles 00:33:40 SkyScan query 00:33:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:33:40 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:33:40 Message to Master queued w/err=0: serial=47350 error=0 00:33:45 Received message from Master: op=Filter serial=47351 00:33:45 Color wheel filter change from 0 to 0 00:33:45 FLIGetFilterPos err=0 currentPosition=0 00:33:45 FLIGetStepsRemaining err=0 RemainingSteps=0 00:33:45 Filter is already there-color wheel unchanged 00:33:45 Received message from Master: op=Shutter serial=47352 00:33:45 Shutter LASER close 00:33:45 Received message from Camera: op=State serial=47354 00:33:45 GetSingleValue result=40 Value=cccccccc 00:33:45 SkyScan query 00:33:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:33:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:33:46 Parameters OK 00:33:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:33:46 Set A/D data flow result=40 00:33:46 Set A/D channel type result=40 00:33:46 Set A/D encoding result=40 00:33:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:33:46 Set channel filter=0.000000e+000 result=40 00:33:46 Config A/D Result=40 00:33:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:33:46 Get A/D filter: -9.255963e+061 result=40 00:33:46 Get A/D value=-858993460 result=40 00:33:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:33:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:33:46 Parameters OK 00:33:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:33:46 Set A/D data flow result=40 00:33:46 Set A/D channel type result=40 00:33:46 Set A/D encoding result=40 00:33:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:33:46 Set channel filter=0.000000e+000 result=40 00:33:46 Config A/D Result=40 00:33:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:33:46 Get A/D filter: -9.255963e+061 result=40 00:33:46 Get A/D value=-858993460 result=40 00:33:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:33:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:33:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:33:46 Aux= 00:33:46 Message to Camera, serial 47354 queued 00:34:23 Received message from Master: op=PointingHead serial=47367 00:34:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:34:23 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:34:23 Point started: ret=0 00:34:23 point_skyscan result=0 00:34:24 Check angles 00:34:24 SkyScan query 00:34:25 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 00:34:25 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 00:34:25 Check angles 00:34:25 SkyScan query 00:34:25 SkyScan query done: ret=0 az=126.495<-8433 ze=38.505<-9433 Statuses=0009 0008 00:34:25 Msec=750 True Az=126.495 Ze=38.505 Az status=0009 Ze status=0008 00:34:25 Check angles 00:34:25 SkyScan query 00:34:26 SkyScan query done: ret=0 az=143.835<-9589 ze=38.505<-9433 Statuses=0009 0008 00:34:26 Msec=1500 True Az=143.835 Ze=38.505 Az status=0009 Ze status=0008 00:34:26 Check angles 00:34:26 SkyScan query 00:34:27 SkyScan query done: ret=0 az=161.67<-10778 ze=38.505<-9433 Statuses=0009 0008 00:34:27 Msec=2250 True Az=161.67 Ze=38.505 Az status=0009 Ze status=0008 00:34:27 Check angles 00:34:27 SkyScan query 00:34:28 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 00:34:28 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 00:34:28 Check angles 00:34:28 SkyScan query 00:34:28 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:34:28 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:34:28 Message to Master queued w/err=0: serial=47367 error=0 00:34:33 Received message from Master: op=Filter serial=47368 00:34:33 Color wheel filter change from 0 to 0 00:34:33 FLIGetFilterPos err=0 currentPosition=0 00:34:33 FLIGetStepsRemaining err=0 RemainingSteps=0 00:34:33 Filter is already there-color wheel unchanged 00:34:33 Received message from Master: op=Shutter serial=47369 00:34:33 Shutter LASER close 00:34:33 Received message from Camera: op=State serial=47371 00:34:33 GetSingleValue result=40 Value=cccccccc 00:34:33 SkyScan query 00:34:34 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:34:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:34:34 Parameters OK 00:34:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:34:34 Set A/D data flow result=40 00:34:34 Set A/D channel type result=40 00:34:34 Set A/D encoding result=40 00:34:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:34:34 Set channel filter=0.000000e+000 result=40 00:34:34 Config A/D Result=40 00:34:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:34:34 Get A/D filter: -9.255963e+061 result=40 00:34:34 Get A/D value=-858993460 result=40 00:34:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:34:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:34:34 Parameters OK 00:34:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:34:34 Set A/D data flow result=40 00:34:34 Set A/D channel type result=40 00:34:34 Set A/D encoding result=40 00:34:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:34:34 Set channel filter=0.000000e+000 result=40 00:34:34 Config A/D Result=40 00:34:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:34:34 Get A/D filter: -9.255963e+061 result=40 00:34:34 Get A/D value=-858993460 result=40 00:34:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:34:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:34:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:34:34 Aux= 00:34:34 Message to Camera, serial 47371 queued 00:35:11 Received message from Master: op=PointingHead serial=47384 00:35:11 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:35:11 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:35:11 Point started: ret=0 00:35:11 point_skyscan result=0 00:35:12 Check angles 00:35:12 SkyScan query 00:35:13 SkyScan query done: ret=0 az=152.94<-10196 ze=8.58<-11428 Statuses=0009 0009 00:35:13 Msec=0 True Az=152.94 Ze=8.58 Az status=0009 Ze status=0009 00:35:13 Check angles 00:35:13 SkyScan query 00:35:13 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.765<-12851 Statuses=0009 0009 00:35:13 Msec=750 True Az=135.135 Ze=-12.765 Az status=0009 Ze status=0009 00:35:14 Check angles 00:35:14 SkyScan query 00:35:14 SkyScan query done: ret=0 az=117.09<-7806 ze=-34.17<-14278 Statuses=0009 0009 00:35:14 Msec=1500 True Az=117.09 Ze=-34.17 Az status=0009 Ze status=0009 00:35:14 Check angles 00:35:14 SkyScan query 00:35:15 SkyScan query done: ret=0 az=99.525<-6635 ze=-51.57<-15438 Statuses=0009 0009 00:35:15 Msec=2250 True Az=99.525 Ze=-51.57 Az status=0009 Ze status=0009 00:35:15 Check angles 00:35:15 SkyScan query 00:35:16 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 00:35:16 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 00:35:16 Check angles 00:35:16 SkyScan query 00:35:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:35:16 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:35:16 Message to Master queued w/err=0: serial=47384 error=0 00:35:21 Received message from Master: op=Filter serial=47385 00:35:21 Color wheel filter change from 0 to 0 00:35:21 FLIGetFilterPos err=0 currentPosition=0 00:35:21 FLIGetStepsRemaining err=0 RemainingSteps=0 00:35:21 Filter is already there-color wheel unchanged 00:35:22 Received message from Master: op=Shutter serial=47386 00:35:22 Shutter LASER close 00:35:22 Received message from Camera: op=State serial=47388 00:35:22 GetSingleValue result=40 Value=cccccccc 00:35:22 SkyScan query 00:35:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:35:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:35:22 Parameters OK 00:35:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:35:22 Set A/D data flow result=40 00:35:22 Set A/D channel type result=40 00:35:22 Set A/D encoding result=40 00:35:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:35:22 Set channel filter=0.000000e+000 result=40 00:35:22 Config A/D Result=40 00:35:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:35:22 Get A/D filter: -9.255963e+061 result=40 00:35:22 Get A/D value=-858993460 result=40 00:35:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:35:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:35:22 Parameters OK 00:35:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:35:22 Set A/D data flow result=40 00:35:22 Set A/D channel type result=40 00:35:22 Set A/D encoding result=40 00:35:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:35:22 Set channel filter=0.000000e+000 result=40 00:35:22 Config A/D Result=40 00:35:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:35:22 Get A/D filter: -9.255963e+061 result=40 00:35:22 Get A/D value=-858993460 result=40 00:35:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:35:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:35:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:35:22 Aux= 00:35:22 Message to Camera, serial 47388 queued [UTC 2018-12-11 00:35:54] 00:35:59 Received message from Master: op=PointingHead serial=47401 00:35:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:35:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:35:59 Point started: ret=0 00:35:59 point_skyscan result=0 00:36:00 Check angles 00:36:00 SkyScan query 00:36:01 SkyScan query done: ret=0 az=108.855<-7257 ze=-81.195<-17413 Statuses=0009 0009 00:36:01 Msec=0 True Az=108.855 Ze=-81.195 Az status=0009 Ze status=0009 00:36:01 Check angles 00:36:01 SkyScan query 00:36:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.15<-18810 Statuses=0008 0009 00:36:01 Msec=750 True Az=112.995 Ze=-102.15 Az status=0008 Ze status=0009 00:36:02 Check angles 00:36:02 SkyScan query 00:36:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.105<-20207 Statuses=0008 0009 00:36:02 Msec=1500 True Az=112.995 Ze=-123.105 Az status=0008 Ze status=0009 00:36:02 Check angles 00:36:02 SkyScan query 00:36:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.06<-21604 Statuses=0008 0009 00:36:03 Msec=2250 True Az=112.995 Ze=-144.06 Az status=0008 Ze status=0009 00:36:03 Check angles 00:36:03 SkyScan query 00:36:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.015<-23001 Statuses=0008 0009 00:36:04 Msec=3000 True Az=112.995 Ze=-165.015 Az status=0008 Ze status=0009 00:36:04 Check angles 00:36:04 SkyScan query 00:36:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:36:04 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:36:04 Message to Master queued w/err=0: serial=47401 error=0 00:36:09 Received message from Master: op=Filter serial=47402 00:36:09 Color wheel filter change from 0 to 0 00:36:09 FLIGetFilterPos err=0 currentPosition=0 00:36:09 FLIGetStepsRemaining err=0 RemainingSteps=0 00:36:09 Filter is already there-color wheel unchanged 00:36:10 Received message from Master: op=Shutter serial=47403 00:36:10 Shutter LASER open 00:36:10 Received message from Camera: op=State serial=47405 00:36:10 GetSingleValue result=40 Value=cccccccc 00:36:10 SkyScan query 00:36:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:36:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:36:10 Parameters OK 00:36:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:36:10 Set A/D data flow result=40 00:36:10 Set A/D channel type result=40 00:36:10 Set A/D encoding result=40 00:36:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:36:10 Set channel filter=0.000000e+000 result=40 00:36:10 Config A/D Result=40 00:36:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:36:10 Get A/D filter: -9.255963e+061 result=40 00:36:10 Get A/D value=-858993460 result=40 00:36:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:36:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:36:10 Parameters OK 00:36:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:36:10 Set A/D data flow result=40 00:36:10 Set A/D channel type result=40 00:36:10 Set A/D encoding result=40 00:36:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:36:10 Set channel filter=0.000000e+000 result=40 00:36:10 Config A/D Result=40 00:36:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:36:10 Get A/D filter: -9.255963e+061 result=40 00:36:10 Get A/D value=-858993460 result=40 00:36:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:36:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:36:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:36:10 Aux= 00:36:10 Message to Camera, serial 47405 queued 00:36:19 Received message from Master: op=Shutter serial=47415 00:36:19 Shutter LASER close 00:36:19 Received message from Master: op=PointingHead serial=47419 00:36:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:36:19 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:36:20 Point started: ret=0 00:36:20 point_skyscan result=0 00:36:20 Check angles 00:36:20 SkyScan query 00:36:21 SkyScan query done: ret=0 az=89.895<-5993 ze=157.215<-1519 Statuses=0009 0009 00:36:21 Msec=0 True Az=89.895 Ze=157.215 Az status=0009 Ze status=0009 00:36:21 Check angles 00:36:21 SkyScan query 00:36:22 SkyScan query done: ret=0 az=72<-4800 ze=135.81<-2946 Statuses=0009 0009 00:36:22 Msec=750 True Az=72 Ze=135.81 Az status=0009 Ze status=0009 00:36:22 Check angles 00:36:22 SkyScan query 00:36:22 SkyScan query done: ret=0 az=54.42<-3628 ze=114.375<-4375 Statuses=0009 0009 00:36:22 Msec=1500 True Az=54.42 Ze=114.375 Az status=0009 Ze status=0009 00:36:23 Check angles 00:36:23 SkyScan query 00:36:23 SkyScan query done: ret=0 az=40.98<-2732 ze=93.465<-5769 Statuses=0009 0009 00:36:23 Msec=2250 True Az=40.98 Ze=93.465 Az status=0009 Ze status=0009 00:36:23 Check angles 00:36:23 SkyScan query 00:36:24 SkyScan query done: ret=0 az=40.995<-2733 ze=72.48<-7168 Statuses=0008 0009 00:36:24 Msec=3000 True Az=40.995 Ze=72.48 Az status=0008 Ze status=0009 00:36:24 Check angles 00:36:24 SkyScan query 00:36:25 SkyScan query done: ret=0 az=40.995<-2733 ze=52.08<-8528 Statuses=0008 0009 00:36:25 Msec=3750 True Az=40.995 Ze=52.08 Az status=0008 Ze status=0009 00:36:25 Check angles 00:36:25 SkyScan query 00:36:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:36:25 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:36:25 Message to Master queued w/err=0: serial=47419 error=0 00:36:30 Received message from Master: op=Filter serial=47420 00:36:30 Color wheel filter change from 0 to 0 00:36:30 FLIGetFilterPos err=0 currentPosition=0 00:36:30 FLIGetStepsRemaining err=0 RemainingSteps=0 00:36:30 Filter is already there-color wheel unchanged 00:36:31 Received message from Master: op=Shutter serial=47421 00:36:31 Shutter LASER close 00:36:31 Received message from Camera: op=State serial=47423 00:36:31 GetSingleValue result=40 Value=cccccccc 00:36:31 SkyScan query 00:36:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:36:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:36:31 Parameters OK 00:36:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:36:31 Set A/D data flow result=40 00:36:31 Set A/D channel type result=40 00:36:31 Set A/D encoding result=40 00:36:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:36:31 Set channel filter=0.000000e+000 result=40 00:36:31 Config A/D Result=40 00:36:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:36:31 Get A/D filter: -9.255963e+061 result=40 00:36:31 Get A/D value=-858993460 result=40 00:36:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:36:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:36:31 Parameters OK 00:36:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:36:31 Set A/D data flow result=40 00:36:31 Set A/D channel type result=40 00:36:31 Set A/D encoding result=40 00:36:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:36:31 Set channel filter=0.000000e+000 result=40 00:36:31 Config A/D Result=40 00:36:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:36:31 Get A/D filter: -9.255963e+061 result=40 00:36:31 Get A/D value=-858993460 result=40 00:36:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:36:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:36:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:36:31 Aux= 00:36:31 Message to Camera, serial 47423 queued 00:37:08 Received message from Master: op=PointingHead serial=47436 00:37:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:37:08 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:37:09 Point started: ret=0 00:37:09 point_skyscan result=0 00:37:09 Check angles 00:37:09 SkyScan query 00:37:10 SkyScan query done: ret=0 az=40.995<-2733 ze=21.78<-10548 Statuses=0008 0009 00:37:10 Msec=0 True Az=40.995 Ze=21.78 Az status=0008 Ze status=0009 00:37:10 Check angles 00:37:10 SkyScan query 00:37:11 SkyScan query done: ret=0 az=40.98<-2732 ze=0.84<-11944 Statuses=0008 0009 00:37:11 Msec=750 True Az=40.98 Ze=0.84 Az status=0008 Ze status=0009 00:37:11 Check angles 00:37:11 SkyScan query 00:37:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.115<-13341 Statuses=0008 0009 00:37:12 Msec=1500 True Az=40.995 Ze=-20.115 Az status=0008 Ze status=0009 00:37:12 Check angles 00:37:12 SkyScan query 00:37:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 00:37:12 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 00:37:13 Check angles 00:37:13 SkyScan query 00:37:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 00:37:13 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 00:37:13 Message to Master queued w/err=0: serial=47436 error=0 00:37:18 Received message from Master: op=Filter serial=47437 00:37:18 Color wheel filter change from 0 to 0 00:37:18 FLIGetFilterPos err=0 currentPosition=0 00:37:18 FLIGetStepsRemaining err=0 RemainingSteps=0 00:37:18 Filter is already there-color wheel unchanged 00:37:18 Received message from Master: op=Shutter serial=47438 00:37:18 Shutter LASER close 00:37:18 Received message from Camera: op=State serial=47440 00:37:18 GetSingleValue result=40 Value=cccccccc 00:37:18 SkyScan query 00:37:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:37:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:37:19 Parameters OK 00:37:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:37:19 Set A/D data flow result=40 00:37:19 Set A/D channel type result=40 00:37:19 Set A/D encoding result=40 00:37:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:37:19 Set channel filter=0.000000e+000 result=40 00:37:19 Config A/D Result=40 00:37:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:37:19 Get A/D filter: -9.255963e+061 result=40 00:37:19 Get A/D value=-858993460 result=40 00:37:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:37:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:37:19 Parameters OK 00:37:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:37:19 Set A/D data flow result=40 00:37:19 Set A/D channel type result=40 00:37:19 Set A/D encoding result=40 00:37:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:37:19 Set channel filter=0.000000e+000 result=40 00:37:19 Config A/D Result=40 00:37:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:37:19 Get A/D filter: -9.255963e+061 result=40 00:37:19 Get A/D value=-858993460 result=40 00:37:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:37:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:37:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:37:19 Aux= 00:37:19 Message to Camera, serial 47440 queued 00:37:56 Received message from Master: op=PointingHead serial=47453 00:37:56 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:37:56 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:37:56 Point started: ret=0 00:37:56 point_skyscan result=0 00:37:57 Check angles 00:37:57 SkyScan query 00:37:57 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.715<-16581 Statuses=0009 0009 00:37:57 Msec=0 True Az=64.23 Ze=-68.715 Az status=0009 Ze status=0009 00:37:58 Check angles 00:37:58 SkyScan query 00:37:58 SkyScan query done: ret=0 az=81.93<-5462 ze=-89.7<-17980 Statuses=0009 0009 00:37:58 Msec=750 True Az=81.93 Ze=-89.7 Az status=0009 Ze status=0009 00:37:58 Check angles 00:37:58 SkyScan query 00:37:59 SkyScan query done: ret=0 az=99.375<-6625 ze=-110.64<-19376 Statuses=0009 0009 00:37:59 Msec=1500 True Az=99.375 Ze=-110.64 Az status=0009 Ze status=0009 00:37:59 Check angles 00:37:59 SkyScan query 00:38:00 SkyScan query done: ret=0 az=116.94<-7796 ze=-131.595<-20773 Statuses=0009 0009 00:38:00 Msec=2250 True Az=116.94 Ze=-131.595 Az status=0009 Ze status=0009 00:38:00 Check angles 00:38:00 SkyScan query 00:38:00 SkyScan query done: ret=0 az=131.16<-8744 ze=-141.54<-21436 Statuses=0009 0008 00:38:00 Msec=3000 True Az=131.16 Ze=-141.54 Az status=0009 Ze status=0008 00:38:01 Check angles 00:38:01 SkyScan query 00:38:01 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:38:01 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:38:01 Message to Master queued w/err=0: serial=47453 error=0 00:38:06 Received message from Master: op=Filter serial=47454 00:38:06 Color wheel filter change from 0 to 0 00:38:06 FLIGetFilterPos err=0 currentPosition=0 00:38:06 FLIGetStepsRemaining err=0 RemainingSteps=0 00:38:06 Filter is already there-color wheel unchanged 00:38:06 Received message from Master: op=Shutter serial=47455 00:38:06 Shutter LASER close 00:38:06 Received message from Camera: op=State serial=47457 00:38:06 GetSingleValue result=40 Value=cccccccc 00:38:06 SkyScan query 00:38:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:38:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:38:07 Parameters OK 00:38:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:38:07 Set A/D data flow result=40 00:38:07 Set A/D channel type result=40 00:38:07 Set A/D encoding result=40 00:38:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:38:07 Set channel filter=0.000000e+000 result=40 00:38:07 Config A/D Result=40 00:38:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:38:07 Get A/D filter: -9.255963e+061 result=40 00:38:07 Get A/D value=-858993460 result=40 00:38:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:38:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:38:07 Parameters OK 00:38:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:38:07 Set A/D data flow result=40 00:38:07 Set A/D channel type result=40 00:38:07 Set A/D encoding result=40 00:38:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:38:07 Set channel filter=0.000000e+000 result=40 00:38:07 Config A/D Result=40 00:38:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:38:07 Get A/D filter: -9.255963e+061 result=40 00:38:07 Get A/D value=-858993460 result=40 00:38:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:38:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:38:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:38:07 Aux= 00:38:07 Message to Camera, serial 47457 queued 00:38:44 Received message from Master: op=PointingHead serial=47470 00:38:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:38:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:38:44 Point started: ret=0 00:38:44 point_skyscan result=0 00:38:45 Check angles 00:38:45 SkyScan query 00:38:46 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.465<-23431 Statuses=0009 0009 00:38:46 Msec=0 True Az=113.01 Ze=-171.465 Az status=0009 Ze status=0009 00:38:46 Check angles 00:38:46 SkyScan query 00:38:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:38:46 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:38:46 Message to Master queued w/err=0: serial=47470 error=0 00:38:51 Received message from Master: op=Filter serial=47471 00:38:51 Color wheel filter change from 0 to 0 00:38:51 FLIGetFilterPos err=0 currentPosition=0 00:38:51 FLIGetStepsRemaining err=0 RemainingSteps=0 00:38:51 Filter is already there-color wheel unchanged 00:38:51 Received message from Master: op=Shutter serial=47472 00:38:51 Shutter LASER open 00:38:52 Received message from Camera: op=State serial=47474 00:38:52 GetSingleValue result=40 Value=cccccccc 00:38:52 SkyScan query 00:38:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:38:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:38:52 Parameters OK 00:38:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:38:52 Set A/D data flow result=40 00:38:52 Set A/D channel type result=40 00:38:52 Set A/D encoding result=40 00:38:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:38:52 Set channel filter=0.000000e+000 result=40 00:38:52 Config A/D Result=40 00:38:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:38:52 Get A/D filter: -9.255963e+061 result=40 00:38:52 Get A/D value=-858993460 result=40 00:38:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:38:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:38:52 Parameters OK 00:38:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:38:52 Set A/D data flow result=40 00:38:52 Set A/D channel type result=40 00:38:52 Set A/D encoding result=40 00:38:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:38:52 Set channel filter=0.000000e+000 result=40 00:38:52 Config A/D Result=40 00:38:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:38:52 Get A/D filter: -9.255963e+061 result=40 00:38:52 Get A/D value=-858993460 result=40 00:38:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:38:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:38:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:38:52 Aux= 00:38:52 Message to Camera, serial 47474 queued 00:39:01 Received message from Master: op=Shutter serial=47484 00:39:01 Shutter LASER close 00:39:01 Received message from Master: op=PointingHead serial=47488 00:39:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:39:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:39:02 Point started: ret=0 00:39:02 point_skyscan result=0 00:39:02 Check angles 00:39:02 SkyScan query 00:39:03 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.1<-21540 Statuses=0009 0009 00:39:03 Msec=0 True Az=135.945 Ze=-143.1 Az status=0009 Ze status=0009 00:39:03 Check angles 00:39:03 SkyScan query 00:39:04 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.19<-20146 Statuses=0009 0009 00:39:04 Msec=750 True Az=153.57 Ze=-122.19 Az status=0009 Ze status=0009 00:39:04 Check angles 00:39:04 SkyScan query 00:39:04 SkyScan query done: ret=0 az=170.985<-11399 ze=-101.325<-18755 Statuses=0009 0009 00:39:04 Msec=1500 True Az=170.985 Ze=-101.325 Az status=0009 Ze status=0009 00:39:05 Check angles 00:39:05 SkyScan query 00:39:05 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.325<-17355 Statuses=0008 0009 00:39:05 Msec=2250 True Az=176.025 Ze=-80.325 Az status=0008 Ze status=0009 00:39:05 Check angles 00:39:05 SkyScan query 00:39:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.385<-15959 Statuses=0008 0009 00:39:06 Msec=3000 True Az=175.995 Ze=-59.385 Az status=0008 Ze status=0009 00:39:06 Check angles 00:39:06 SkyScan query 00:39:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:39:07 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:39:07 Message to Master queued w/err=0: serial=47488 error=0 00:39:12 Received message from Master: op=Filter serial=47489 00:39:12 Color wheel filter change from 0 to 0 00:39:12 FLIGetFilterPos err=0 currentPosition=0 00:39:12 FLIGetStepsRemaining err=0 RemainingSteps=0 00:39:12 Filter is already there-color wheel unchanged 00:39:12 Received message from Master: op=Shutter serial=47490 00:39:12 Shutter LASER close 00:39:12 Received message from Camera: op=State serial=47492 00:39:12 GetSingleValue result=40 Value=cccccccc 00:39:12 SkyScan query 00:39:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:39:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:39:13 Parameters OK 00:39:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:39:13 Set A/D data flow result=40 00:39:13 Set A/D channel type result=40 00:39:13 Set A/D encoding result=40 00:39:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:39:13 Set channel filter=0.000000e+000 result=40 00:39:13 Config A/D Result=40 00:39:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:39:13 Get A/D filter: -9.255963e+061 result=40 00:39:13 Get A/D value=-858993460 result=40 00:39:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:39:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:39:13 Parameters OK 00:39:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:39:13 Set A/D data flow result=40 00:39:13 Set A/D channel type result=40 00:39:13 Set A/D encoding result=40 00:39:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:39:13 Set channel filter=0.000000e+000 result=40 00:39:13 Config A/D Result=40 00:39:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:39:13 Get A/D filter: -9.255963e+061 result=40 00:39:13 Get A/D value=-858993460 result=40 00:39:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:39:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:39:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:39:13 Aux= 00:39:13 Message to Camera, serial 47492 queued 00:39:49 Received message from Master: op=PointingHead serial=47505 00:39:49 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:39:49 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:39:50 Point started: ret=0 00:39:50 point_skyscan result=0 00:39:50 Check angles 00:39:50 SkyScan query 00:39:51 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.765<-13451 Statuses=0009 0009 00:39:51 Msec=0 True Az=152.985 Ze=-21.765 Az status=0009 Ze status=0009 00:39:51 Check angles 00:39:51 SkyScan query 00:39:52 SkyScan query done: ret=0 az=135.51<-9034 ze=-0.735<-12049 Statuses=0009 0009 00:39:52 Msec=750 True Az=135.51 Ze=-0.735 Az status=0009 Ze status=0009 00:39:52 Check angles 00:39:52 SkyScan query 00:39:53 SkyScan query done: ret=0 az=117.96<-7864 ze=20.19<-10654 Statuses=0009 0009 00:39:53 Msec=1500 True Az=117.96 Ze=20.19 Az status=0009 Ze status=0009 00:39:53 Check angles 00:39:53 SkyScan query 00:39:53 SkyScan query done: ret=0 az=100.485<-6699 ze=41.145<-9257 Statuses=0009 0009 00:39:53 Msec=2250 True Az=100.485 Ze=41.145 Az status=0009 Ze status=0009 00:39:53 Check angles 00:39:53 SkyScan query 00:39:54 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 00:39:54 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 00:39:54 Check angles 00:39:54 SkyScan query 00:39:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:39:55 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:39:55 Message to Master queued w/err=0: serial=47505 error=0 00:40:00 Received message from Master: op=Filter serial=47506 00:40:00 Color wheel filter change from 0 to 0 00:40:00 FLIGetFilterPos err=0 currentPosition=0 00:40:00 FLIGetStepsRemaining err=0 RemainingSteps=0 00:40:00 Filter is already there-color wheel unchanged 00:40:00 Received message from Master: op=Shutter serial=47507 00:40:00 Shutter LASER close 00:40:00 Received message from Camera: op=State serial=47509 00:40:00 GetSingleValue result=40 Value=cccccccc 00:40:00 SkyScan query 00:40:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:40:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:40:01 Parameters OK 00:40:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:40:01 Set A/D data flow result=40 00:40:01 Set A/D channel type result=40 00:40:01 Set A/D encoding result=40 00:40:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:40:01 Set channel filter=0.000000e+000 result=40 00:40:01 Config A/D Result=40 00:40:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:40:01 Get A/D filter: -9.255963e+061 result=40 00:40:01 Get A/D value=-858993460 result=40 00:40:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:40:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:40:01 Parameters OK 00:40:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:40:01 Set A/D data flow result=40 00:40:01 Set A/D channel type result=40 00:40:01 Set A/D encoding result=40 00:40:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:40:01 Set channel filter=0.000000e+000 result=40 00:40:01 Config A/D Result=40 00:40:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:40:01 Get A/D filter: -9.255963e+061 result=40 00:40:01 Get A/D value=-858993460 result=40 00:40:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:40:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:40:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:40:01 Aux= 00:40:01 Message to Camera, serial 47509 queued 00:40:37 Received message from Master: op=PointingHead serial=47522 00:40:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:40:37 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:40:38 Point started: ret=0 00:40:38 point_skyscan result=0 00:40:39 Check angles 00:40:39 SkyScan query 00:40:39 SkyScan query done: ret=0 az=109.02<-7268 ze=38.49<-9434 Statuses=0009 0008 00:40:39 Msec=0 True Az=109.02 Ze=38.49 Az status=0009 Ze status=0008 00:40:39 Check angles 00:40:39 SkyScan query 00:40:40 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 00:40:40 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 00:40:40 Check angles 00:40:40 SkyScan query 00:40:41 SkyScan query done: ret=0 az=144.345<-9623 ze=38.505<-9433 Statuses=0009 0008 00:40:41 Msec=1500 True Az=144.345 Ze=38.505 Az status=0009 Ze status=0008 00:40:41 Check angles 00:40:41 SkyScan query 00:40:41 SkyScan query done: ret=0 az=161.82<-10788 ze=38.505<-9433 Statuses=0009 0008 00:40:41 Msec=2250 True Az=161.82 Ze=38.505 Az status=0009 Ze status=0008 00:40:42 Check angles 00:40:42 SkyScan query 00:40:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 00:40:42 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 00:40:42 Check angles 00:40:42 SkyScan query 00:40:43 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:40:43 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:40:43 Message to Master queued w/err=0: serial=47522 error=0 00:40:48 Received message from Master: op=Filter serial=47523 00:40:48 Color wheel filter change from 0 to 0 00:40:48 FLIGetFilterPos err=0 currentPosition=0 00:40:48 FLIGetStepsRemaining err=0 RemainingSteps=0 00:40:48 Filter is already there-color wheel unchanged 00:40:48 Received message from Master: op=Shutter serial=47524 00:40:48 Shutter LASER close 00:40:48 Received message from Camera: op=State serial=47526 00:40:48 GetSingleValue result=40 Value=cccccccc 00:40:48 SkyScan query 00:40:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:40:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:40:49 Parameters OK 00:40:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:40:49 Set A/D data flow result=40 00:40:49 Set A/D channel type result=40 00:40:49 Set A/D encoding result=40 00:40:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:40:49 Set channel filter=0.000000e+000 result=40 00:40:49 Config A/D Result=40 00:40:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:40:49 Get A/D filter: -9.255963e+061 result=40 00:40:49 Get A/D value=-858993460 result=40 00:40:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:40:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:40:49 Parameters OK 00:40:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:40:49 Set A/D data flow result=40 00:40:49 Set A/D channel type result=40 00:40:49 Set A/D encoding result=40 00:40:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:40:49 Set channel filter=0.000000e+000 result=40 00:40:49 Config A/D Result=40 00:40:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:40:49 Get A/D filter: -9.255963e+061 result=40 00:40:49 Get A/D value=-858993460 result=40 00:40:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:40:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:40:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:40:49 Aux= 00:40:49 Message to Camera, serial 47526 queued 00:41:25 Received message from Master: op=PointingHead serial=47539 00:41:25 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:41:25 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:41:26 Point started: ret=0 00:41:26 point_skyscan result=0 00:41:27 Check angles 00:41:27 SkyScan query 00:41:27 SkyScan query done: ret=0 az=152.745<-10183 ze=8.595<-11427 Statuses=0009 0009 00:41:27 Msec=0 True Az=152.745 Ze=8.595 Az status=0009 Ze status=0009 00:41:27 Check angles 00:41:27 SkyScan query 00:41:28 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.345<-12823 Statuses=0009 0009 00:41:28 Msec=750 True Az=135.375 Ze=-12.345 Az status=0009 Ze status=0009 00:41:28 Check angles 00:41:28 SkyScan query 00:41:29 SkyScan query done: ret=0 az=117.735<-7849 ze=-33.285<-14219 Statuses=0009 0009 00:41:29 Msec=1500 True Az=117.735 Ze=-33.285 Az status=0009 Ze status=0009 00:41:29 Check angles 00:41:29 SkyScan query 00:41:29 SkyScan query done: ret=0 az=100.29<-6686 ze=-51.54<-15436 Statuses=0009 0009 00:41:29 Msec=2250 True Az=100.29 Ze=-51.54 Az status=0009 Ze status=0009 00:41:30 Check angles 00:41:30 SkyScan query 00:41:30 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 00:41:30 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 00:41:30 Check angles 00:41:30 SkyScan query 00:41:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:41:31 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:41:31 Message to Master queued w/err=0: serial=47539 error=0 00:41:36 Received message from Master: op=Filter serial=47540 00:41:36 Color wheel filter change from 0 to 0 00:41:36 FLIGetFilterPos err=0 currentPosition=0 00:41:36 FLIGetStepsRemaining err=0 RemainingSteps=0 00:41:36 Filter is already there-color wheel unchanged 00:41:36 Received message from Master: op=Shutter serial=47541 00:41:36 Shutter LASER close 00:41:36 Received message from Camera: op=State serial=47543 00:41:36 GetSingleValue result=40 Value=cccccccc 00:41:36 SkyScan query 00:41:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:41:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:41:37 Parameters OK 00:41:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:41:37 Set A/D data flow result=40 00:41:37 Set A/D channel type result=40 00:41:37 Set A/D encoding result=40 00:41:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:41:37 Set channel filter=0.000000e+000 result=40 00:41:37 Config A/D Result=40 00:41:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:41:37 Get A/D filter: -9.255963e+061 result=40 00:41:37 Get A/D value=-858993460 result=40 00:41:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:41:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:41:37 Parameters OK 00:41:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:41:37 Set A/D data flow result=40 00:41:37 Set A/D channel type result=40 00:41:37 Set A/D encoding result=40 00:41:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:41:37 Set channel filter=0.000000e+000 result=40 00:41:37 Config A/D Result=40 00:41:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:41:37 Get A/D filter: -9.255963e+061 result=40 00:41:37 Get A/D value=-858993460 result=40 00:41:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:41:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:41:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:41:37 Aux= 00:41:37 Message to Camera, serial 47543 queued 00:42:13 Received message from Master: op=PointingHead serial=47555 00:42:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:42:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:42:13 Point started: ret=0 00:42:13 point_skyscan result=0 00:42:14 Check angles 00:42:14 SkyScan query 00:42:14 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.765<-17451 Statuses=0009 0009 00:42:14 Msec=0 True Az=109.395 Ze=-81.765 Az status=0009 Ze status=0009 00:42:14 Check angles 00:42:14 SkyScan query 00:42:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.705<-18847 Statuses=0008 0009 00:42:15 Msec=750 True Az=112.995 Ze=-102.705 Az status=0008 Ze status=0009 00:42:15 Check angles 00:42:15 SkyScan query 00:42:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.11<-20274 Statuses=0008 0009 00:42:16 Msec=1500 True Az=112.995 Ze=-124.11 Az status=0008 Ze status=0009 00:42:16 Check angles 00:42:16 SkyScan query 00:42:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.065<-21671 Statuses=0008 0009 00:42:17 Msec=2250 True Az=112.995 Ze=-145.065 Az status=0008 Ze status=0009 00:42:17 Check angles 00:42:17 SkyScan query 00:42:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.975<-23065 Statuses=0008 0009 00:42:17 Msec=3000 True Az=112.995 Ze=-165.975 Az status=0008 Ze status=0009 00:42:18 Check angles 00:42:18 SkyScan query 00:42:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:42:18 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:42:18 Message to Master queued w/err=0: serial=47555 error=0 00:42:23 Received message from Master: op=Filter serial=47556 00:42:23 Color wheel filter change from 0 to 0 00:42:23 FLIGetFilterPos err=0 currentPosition=0 00:42:23 FLIGetStepsRemaining err=0 RemainingSteps=0 00:42:23 Filter is already there-color wheel unchanged 00:42:23 Received message from Master: op=Shutter serial=47557 00:42:23 Shutter LASER open 00:42:23 Received message from Camera: op=State serial=47559 00:42:23 GetSingleValue result=40 Value=cccccccc 00:42:23 SkyScan query 00:42:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:42:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:42:24 Parameters OK 00:42:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:42:24 Set A/D data flow result=40 00:42:24 Set A/D channel type result=40 00:42:24 Set A/D encoding result=40 00:42:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:42:24 Set channel filter=0.000000e+000 result=40 00:42:24 Config A/D Result=40 00:42:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:42:24 Get A/D filter: -9.255963e+061 result=40 00:42:24 Get A/D value=-858993460 result=40 00:42:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:42:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:42:24 Parameters OK 00:42:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:42:24 Set A/D data flow result=40 00:42:24 Set A/D channel type result=40 00:42:24 Set A/D encoding result=40 00:42:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:42:24 Set channel filter=0.000000e+000 result=40 00:42:24 Config A/D Result=40 00:42:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:42:24 Get A/D filter: -9.255963e+061 result=40 00:42:24 Get A/D value=-858993460 result=40 00:42:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:42:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:42:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:42:24 Aux= 00:42:24 Message to Camera, serial 47559 queued 00:42:32 Received message from Master: op=Shutter serial=47569 00:42:32 Shutter LASER close 00:42:33 Received message from Master: op=PointingHead serial=47573 00:42:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:42:33 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:42:33 Point started: ret=0 00:42:33 point_skyscan result=0 00:42:34 Check angles 00:42:34 SkyScan query 00:42:35 SkyScan query done: ret=0 az=90.18<-6012 ze=157.515<-1499 Statuses=0009 0009 00:42:35 Msec=0 True Az=90.18 Ze=157.515 Az status=0009 Ze status=0009 00:42:35 Check angles 00:42:35 SkyScan query 00:42:35 SkyScan query done: ret=0 az=72.24<-4816 ze=136.095<-2927 Statuses=0009 0009 00:42:35 Msec=750 True Az=72.24 Ze=136.095 Az status=0009 Ze status=0009 00:42:36 Check angles 00:42:36 SkyScan query 00:42:36 SkyScan query done: ret=0 az=54.855<-3657 ze=115.17<-4322 Statuses=0009 0009 00:42:36 Msec=1500 True Az=54.855 Ze=115.17 Az status=0009 Ze status=0009 00:42:36 Check angles 00:42:36 SkyScan query 00:42:37 SkyScan query done: ret=0 az=40.86<-2724 ze=94.17<-5722 Statuses=0009 0009 00:42:37 Msec=2250 True Az=40.86 Ze=94.17 Az status=0009 Ze status=0009 00:42:37 Check angles 00:42:37 SkyScan query 00:42:38 SkyScan query done: ret=0 az=40.995<-2733 ze=73.23<-7118 Statuses=0008 0009 00:42:38 Msec=3000 True Az=40.995 Ze=73.23 Az status=0008 Ze status=0009 00:42:38 Check angles 00:42:38 SkyScan query 00:42:38 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 00:42:38 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 00:42:39 Check angles 00:42:39 SkyScan query 00:42:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:42:39 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:42:39 Message to Master queued w/err=0: serial=47573 error=0 00:42:44 Received message from Master: op=Filter serial=47574 00:42:44 Color wheel filter change from 0 to 0 00:42:44 FLIGetFilterPos err=0 currentPosition=0 00:42:44 FLIGetStepsRemaining err=0 RemainingSteps=0 00:42:44 Filter is already there-color wheel unchanged 00:42:44 Received message from Master: op=Shutter serial=47575 00:42:44 Shutter LASER close 00:42:44 Received message from Camera: op=State serial=47577 00:42:44 GetSingleValue result=40 Value=cccccccc 00:42:44 SkyScan query 00:42:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:42:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:42:45 Parameters OK 00:42:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:42:45 Set A/D data flow result=40 00:42:45 Set A/D channel type result=40 00:42:45 Set A/D encoding result=40 00:42:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:42:45 Set channel filter=0.000000e+000 result=40 00:42:45 Config A/D Result=40 00:42:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:42:45 Get A/D filter: -9.255963e+061 result=40 00:42:45 Get A/D value=-858993460 result=40 00:42:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:42:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:42:45 Parameters OK 00:42:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:42:45 Set A/D data flow result=40 00:42:45 Set A/D channel type result=40 00:42:45 Set A/D encoding result=40 00:42:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:42:45 Set channel filter=0.000000e+000 result=40 00:42:45 Config A/D Result=40 00:42:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:42:45 Get A/D filter: -9.255963e+061 result=40 00:42:45 Get A/D value=-858993460 result=40 00:42:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:42:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:42:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:42:45 Aux= 00:42:45 Message to Camera, serial 47577 queued 00:43:22 Received message from Master: op=PointingHead serial=47590 00:43:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:43:22 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:43:22 Point started: ret=0 00:43:22 point_skyscan result=0 00:43:23 Check angles 00:43:23 SkyScan query 00:43:24 SkyScan query done: ret=0 az=40.995<-2733 ze=21.57<-10562 Statuses=0008 0009 00:43:24 Msec=0 True Az=40.995 Ze=21.57 Az status=0008 Ze status=0009 00:43:24 Check angles 00:43:24 SkyScan query 00:43:24 SkyScan query done: ret=0 az=40.995<-2733 ze=0.6<-11960 Statuses=0008 0009 00:43:24 Msec=750 True Az=40.995 Ze=0.6 Az status=0008 Ze status=0009 00:43:25 Check angles 00:43:25 SkyScan query 00:43:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.37<-13358 Statuses=0008 0009 00:43:25 Msec=1500 True Az=40.995 Ze=-20.37 Az status=0008 Ze status=0009 00:43:25 Check angles 00:43:25 SkyScan query 00:43:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0009 00:43:26 Msec=2250 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0009 00:43:26 Check angles 00:43:26 SkyScan query 00:43:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 00:43:27 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 00:43:27 Message to Master queued w/err=0: serial=47590 error=0 00:43:32 Received message from Master: op=Filter serial=47591 00:43:32 Color wheel filter change from 0 to 0 00:43:32 FLIGetFilterPos err=0 currentPosition=0 00:43:32 FLIGetStepsRemaining err=0 RemainingSteps=0 00:43:32 Filter is already there-color wheel unchanged 00:43:32 Received message from Master: op=Shutter serial=47592 00:43:32 Shutter LASER close 00:43:32 Received message from Camera: op=State serial=47594 00:43:32 GetSingleValue result=40 Value=cccccccc 00:43:32 SkyScan query 00:43:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:43:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:43:32 Parameters OK 00:43:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:43:32 Set A/D data flow result=40 00:43:32 Set A/D channel type result=40 00:43:32 Set A/D encoding result=40 00:43:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:43:32 Set channel filter=0.000000e+000 result=40 00:43:32 Config A/D Result=40 00:43:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:43:32 Get A/D filter: -9.255963e+061 result=40 00:43:32 Get A/D value=-858993460 result=40 00:43:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:43:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:43:32 Parameters OK 00:43:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:43:32 Set A/D data flow result=40 00:43:32 Set A/D channel type result=40 00:43:32 Set A/D encoding result=40 00:43:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:43:32 Set channel filter=0.000000e+000 result=40 00:43:32 Config A/D Result=40 00:43:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:43:32 Get A/D filter: -9.255963e+061 result=40 00:43:32 Get A/D value=-858993460 result=40 00:43:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:43:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:43:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:43:32 Aux= 00:43:32 Message to Camera, serial 47594 queued 00:44:09 Received message from Master: op=PointingHead serial=47607 00:44:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:44:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:44:10 Point started: ret=0 00:44:10 point_skyscan result=0 00:44:10 Check angles 00:44:10 SkyScan query 00:44:11 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.16<-16544 Statuses=0009 0009 00:44:11 Msec=0 True Az=63.795 Ze=-68.16 Az status=0009 Ze status=0009 00:44:11 Check angles 00:44:11 SkyScan query 00:44:12 SkyScan query done: ret=0 az=81.3<-5420 ze=-89.13<-17942 Statuses=0009 0009 00:44:12 Msec=750 True Az=81.3 Ze=-89.13 Az status=0009 Ze status=0009 00:44:12 Check angles 00:44:12 SkyScan query 00:44:12 SkyScan query done: ret=0 az=99.24<-6616 ze=-110.52<-19368 Statuses=0009 0009 00:44:12 Msec=1500 True Az=99.24 Ze=-110.52 Az status=0009 Ze status=0009 00:44:13 Check angles 00:44:13 SkyScan query 00:44:13 SkyScan query done: ret=0 az=116.805<-7787 ze=-131.46<-20764 Statuses=0009 0009 00:44:13 Msec=2250 True Az=116.805 Ze=-131.46 Az status=0009 Ze status=0009 00:44:13 Check angles 00:44:13 SkyScan query 00:44:14 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 00:44:14 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 00:44:14 Check angles 00:44:14 SkyScan query 00:44:15 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:44:15 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:44:15 Message to Master queued w/err=0: serial=47607 error=0 00:44:20 Received message from Master: op=Filter serial=47608 00:44:20 Color wheel filter change from 0 to 0 00:44:20 FLIGetFilterPos err=0 currentPosition=0 00:44:20 FLIGetStepsRemaining err=0 RemainingSteps=0 00:44:20 Filter is already there-color wheel unchanged 00:44:20 Received message from Master: op=Shutter serial=47609 00:44:20 Shutter LASER close 00:44:20 Received message from Camera: op=State serial=47611 00:44:20 GetSingleValue result=40 Value=cccccccc 00:44:20 SkyScan query 00:44:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:44:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:44:21 Parameters OK 00:44:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:44:21 Set A/D data flow result=40 00:44:21 Set A/D channel type result=40 00:44:21 Set A/D encoding result=40 00:44:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:44:21 Set channel filter=0.000000e+000 result=40 00:44:21 Config A/D Result=40 00:44:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:44:21 Get A/D filter: -9.255963e+061 result=40 00:44:21 Get A/D value=-858993460 result=40 00:44:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:44:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:44:21 Parameters OK 00:44:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:44:21 Set A/D data flow result=40 00:44:21 Set A/D channel type result=40 00:44:21 Set A/D encoding result=40 00:44:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:44:21 Set channel filter=0.000000e+000 result=40 00:44:21 Config A/D Result=40 00:44:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:44:21 Get A/D filter: -9.255963e+061 result=40 00:44:21 Get A/D value=-858993460 result=40 00:44:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:44:21 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:44:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:44:21 Aux= 00:44:21 Message to Camera, serial 47611 queued 00:44:57 Received message from Master: op=PointingHead serial=47624 00:44:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:44:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:44:58 Point started: ret=0 00:44:58 point_skyscan result=0 00:44:58 Check angles 00:44:58 SkyScan query 00:44:59 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.135<-23409 Statuses=0009 0009 00:44:59 Msec=0 True Az=113.01 Ze=-171.135 Az status=0009 Ze status=0009 00:44:59 Check angles 00:44:59 SkyScan query 00:45:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:45:00 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:45:00 Message to Master queued w/err=0: serial=47624 error=0 00:45:05 Received message from Master: op=Filter serial=47625 00:45:05 Color wheel filter change from 0 to 0 00:45:05 FLIGetFilterPos err=0 currentPosition=0 00:45:05 FLIGetStepsRemaining err=0 RemainingSteps=0 00:45:05 Filter is already there-color wheel unchanged 00:45:05 Received message from Master: op=Shutter serial=47626 00:45:05 Shutter LASER open 00:45:05 Received message from Camera: op=State serial=47628 00:45:05 GetSingleValue result=40 Value=cccccccc 00:45:05 SkyScan query 00:45:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:45:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:45:06 Parameters OK 00:45:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:45:06 Set A/D data flow result=40 00:45:06 Set A/D channel type result=40 00:45:06 Set A/D encoding result=40 00:45:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:45:06 Set channel filter=0.000000e+000 result=40 00:45:06 Config A/D Result=40 00:45:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:45:06 Get A/D filter: -9.255963e+061 result=40 00:45:06 Get A/D value=-858993460 result=40 00:45:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:45:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:45:06 Parameters OK 00:45:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:45:06 Set A/D data flow result=40 00:45:06 Set A/D channel type result=40 00:45:06 Set A/D encoding result=40 00:45:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:45:06 Set channel filter=0.000000e+000 result=40 00:45:06 Config A/D Result=40 00:45:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:45:06 Get A/D filter: -9.255963e+061 result=40 00:45:06 Get A/D value=-858993460 result=40 00:45:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:45:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:45:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:45:06 Aux= 00:45:06 Message to Camera, serial 47628 queued 00:45:14 Received message from Master: op=Shutter serial=47638 00:45:14 Shutter LASER close 00:45:15 Received message from Master: op=PointingHead serial=47642 00:45:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:45:15 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:45:15 Point started: ret=0 00:45:15 point_skyscan result=0 00:45:16 Check angles 00:45:16 SkyScan query 00:45:16 SkyScan query done: ret=0 az=135.915<-9061 ze=-143.22<-21548 Statuses=0009 0009 00:45:16 Msec=0 True Az=135.915 Ze=-143.22 Az status=0009 Ze status=0009 00:45:17 Check angles 00:45:17 SkyScan query 00:45:17 SkyScan query done: ret=0 az=153.525<-10235 ze=-122.25<-20150 Statuses=0009 0009 00:45:17 Msec=750 True Az=153.525 Ze=-122.25 Az status=0009 Ze status=0009 00:45:17 Check angles 00:45:17 SkyScan query 00:45:18 SkyScan query done: ret=0 az=170.91<-11394 ze=-101.355<-18757 Statuses=0009 0009 00:45:18 Msec=1500 True Az=170.91 Ze=-101.355 Az status=0009 Ze status=0009 00:45:18 Check angles 00:45:18 SkyScan query 00:45:19 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.355<-17357 Statuses=0008 0009 00:45:19 Msec=2250 True Az=176.025 Ze=-80.355 Az status=0008 Ze status=0009 00:45:19 Check angles 00:45:19 SkyScan query 00:45:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.43<-15962 Statuses=0008 0009 00:45:19 Msec=3000 True Az=175.995 Ze=-59.43 Az status=0008 Ze status=0009 00:45:20 Check angles 00:45:20 SkyScan query 00:45:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:45:20 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 [UTC 2018-12-11 00:45:20] 00:45:20 Message to Master queued w/err=0: serial=47642 error=0 00:45:25 Received message from Master: op=Filter serial=47643 00:45:25 Color wheel filter change from 0 to 0 00:45:25 FLIGetFilterPos err=0 currentPosition=0 00:45:25 FLIGetStepsRemaining err=0 RemainingSteps=0 00:45:25 Filter is already there-color wheel unchanged 00:45:25 Received message from Master: op=Shutter serial=47644 00:45:25 Shutter LASER close 00:45:26 Received message from Camera: op=State serial=47646 00:45:26 GetSingleValue result=40 Value=cccccccc 00:45:26 SkyScan query 00:45:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:45:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:45:26 Parameters OK 00:45:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:45:26 Set A/D data flow result=40 00:45:26 Set A/D channel type result=40 00:45:26 Set A/D encoding result=40 00:45:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:45:26 Set channel filter=0.000000e+000 result=40 00:45:26 Config A/D Result=40 00:45:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:45:26 Get A/D filter: -9.255963e+061 result=40 00:45:26 Get A/D value=-858993460 result=40 00:45:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:45:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:45:26 Parameters OK 00:45:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:45:26 Set A/D data flow result=40 00:45:26 Set A/D channel type result=40 00:45:26 Set A/D encoding result=40 00:45:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:45:26 Set channel filter=0.000000e+000 result=40 00:45:26 Config A/D Result=40 00:45:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:45:26 Get A/D filter: -9.255963e+061 result=40 00:45:26 Get A/D value=-858993460 result=40 00:45:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:45:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:45:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:45:26 Aux= 00:45:26 Message to Camera, serial 47646 queued 00:45:29 Received message from Master: op=Identify serial=47647 00:46:03 Received message from Master: op=PointingHead serial=47662 00:46:03 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:46:03 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:46:03 Point started: ret=0 00:46:03 point_skyscan result=0 00:46:04 Check angles 00:46:04 SkyScan query 00:46:05 SkyScan query done: ret=0 az=152.79<-10186 ze=-21.54<-13436 Statuses=0009 0009 00:46:05 Msec=0 True Az=152.79 Ze=-21.54 Az status=0009 Ze status=0009 00:46:05 Check angles 00:46:05 SkyScan query 00:46:06 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.54<-12036 Statuses=0009 0009 00:46:06 Msec=750 True Az=135.405 Ze=-0.54 Az status=0009 Ze status=0009 00:46:06 Check angles 00:46:06 SkyScan query 00:46:06 SkyScan query done: ret=0 az=117.825<-7855 ze=20.385<-10641 Statuses=0009 0009 00:46:06 Msec=1500 True Az=117.825 Ze=20.385 Az status=0009 Ze status=0009 00:46:06 Check angles 00:46:06 SkyScan query 00:46:07 SkyScan query done: ret=0 az=100.335<-6689 ze=41.385<-9241 Statuses=0009 0009 00:46:07 Msec=2250 True Az=100.335 Ze=41.385 Az status=0009 Ze status=0009 00:46:07 Check angles 00:46:07 SkyScan query 00:46:08 SkyScan query done: ret=0 az=86.04<-5736 ze=51.54<-8564 Statuses=0009 0008 00:46:08 Msec=3000 True Az=86.04 Ze=51.54 Az status=0009 Ze status=0008 00:46:08 Check angles 00:46:08 SkyScan query 00:46:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:46:09 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:46:09 Message to Master queued w/err=0: serial=47662 error=0 00:46:14 Received message from Master: op=Filter serial=47663 00:46:14 Color wheel filter change from 0 to 0 00:46:14 FLIGetFilterPos err=0 currentPosition=0 00:46:14 FLIGetStepsRemaining err=0 RemainingSteps=0 00:46:14 Filter is already there-color wheel unchanged 00:46:14 Received message from Master: op=Shutter serial=47664 00:46:14 Shutter LASER close 00:46:14 Received message from Camera: op=State serial=47666 00:46:14 GetSingleValue result=40 Value=cccccccc 00:46:14 SkyScan query 00:46:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:46:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:46:14 Parameters OK 00:46:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:46:14 Set A/D data flow result=40 00:46:14 Set A/D channel type result=40 00:46:14 Set A/D encoding result=40 00:46:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:46:14 Set channel filter=0.000000e+000 result=40 00:46:14 Config A/D Result=40 00:46:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:46:14 Get A/D filter: -9.255963e+061 result=40 00:46:14 Get A/D value=-858993460 result=40 00:46:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:46:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:46:14 Parameters OK 00:46:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:46:14 Set A/D data flow result=40 00:46:14 Set A/D channel type result=40 00:46:14 Set A/D encoding result=40 00:46:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:46:14 Set channel filter=0.000000e+000 result=40 00:46:14 Config A/D Result=40 00:46:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:46:14 Get A/D filter: -9.255963e+061 result=40 00:46:14 Get A/D value=-858993460 result=40 00:46:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:46:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:46:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:46:14 Aux= 00:46:14 Message to Camera, serial 47666 queued 00:46:51 Received message from Master: op=PointingHead serial=47679 00:46:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:46:51 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:46:51 Point started: ret=0 00:46:51 point_skyscan result=0 00:46:52 Check angles 00:46:52 SkyScan query 00:46:53 SkyScan query done: ret=0 az=108.885<-7259 ze=38.49<-9434 Statuses=0009 0008 00:46:53 Msec=0 True Az=108.885 Ze=38.49 Az status=0009 Ze status=0008 00:46:53 Check angles 00:46:53 SkyScan query 00:46:54 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 00:46:54 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 00:46:54 Check angles 00:46:54 SkyScan query 00:46:54 SkyScan query done: ret=0 az=144.51<-9634 ze=38.505<-9433 Statuses=0009 0008 00:46:54 Msec=1500 True Az=144.51 Ze=38.505 Az status=0009 Ze status=0008 00:46:55 Check angles 00:46:55 SkyScan query 00:46:55 SkyScan query done: ret=0 az=161.91<-10794 ze=38.505<-9433 Statuses=0009 0008 00:46:55 Msec=2250 True Az=161.91 Ze=38.505 Az status=0009 Ze status=0008 00:46:55 Check angles 00:46:55 SkyScan query 00:46:56 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:46:56 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:46:56 Check angles 00:46:56 SkyScan query 00:46:57 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:46:57 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:46:57 Message to Master queued w/err=0: serial=47679 error=0 00:47:02 Received message from Master: op=Filter serial=47680 00:47:02 Color wheel filter change from 0 to 0 00:47:02 FLIGetFilterPos err=0 currentPosition=0 00:47:02 FLIGetStepsRemaining err=0 RemainingSteps=0 00:47:02 Filter is already there-color wheel unchanged 00:47:02 Received message from Master: op=Shutter serial=47681 00:47:02 Shutter LASER close 00:47:02 Received message from Camera: op=State serial=47683 00:47:02 GetSingleValue result=40 Value=cccccccc 00:47:02 SkyScan query 00:47:02 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:47:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:47:02 Parameters OK 00:47:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:47:02 Set A/D data flow result=40 00:47:02 Set A/D channel type result=40 00:47:02 Set A/D encoding result=40 00:47:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:47:02 Set channel filter=0.000000e+000 result=40 00:47:02 Config A/D Result=40 00:47:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:47:02 Get A/D filter: -9.255963e+061 result=40 00:47:02 Get A/D value=-858993460 result=40 00:47:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:47:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:47:02 Parameters OK 00:47:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:47:02 Set A/D data flow result=40 00:47:02 Set A/D channel type result=40 00:47:02 Set A/D encoding result=40 00:47:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:47:02 Set channel filter=0.000000e+000 result=40 00:47:02 Config A/D Result=40 00:47:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:47:02 Get A/D filter: -9.255963e+061 result=40 00:47:02 Get A/D value=-858993460 result=40 00:47:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:47:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:47:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:47:02 Aux= 00:47:02 Message to Camera, serial 47683 queued 00:47:39 Received message from Master: op=PointingHead serial=47696 00:47:39 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:47:39 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:47:40 Point started: ret=0 00:47:40 point_skyscan result=0 00:47:40 Check angles 00:47:40 SkyScan query 00:47:41 SkyScan query done: ret=0 az=152.94<-10196 ze=8.58<-11428 Statuses=0009 0009 00:47:41 Msec=0 True Az=152.94 Ze=8.58 Az status=0009 Ze status=0009 00:47:41 Check angles 00:47:41 SkyScan query 00:47:42 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.765<-12851 Statuses=0009 0009 00:47:42 Msec=750 True Az=135.135 Ze=-12.765 Az status=0009 Ze status=0009 00:47:42 Check angles 00:47:42 SkyScan query 00:47:42 SkyScan query done: ret=0 az=117.525<-7835 ze=-33.69<-14246 Statuses=0009 0009 00:47:42 Msec=1500 True Az=117.525 Ze=-33.69 Az status=0009 Ze status=0009 00:47:43 Check angles 00:47:43 SkyScan query 00:47:43 SkyScan query done: ret=0 az=100.17<-6678 ze=-51.555<-15437 Statuses=0009 0009 00:47:43 Msec=2250 True Az=100.17 Ze=-51.555 Az status=0009 Ze status=0009 00:47:43 Check angles 00:47:43 SkyScan query 00:47:44 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 00:47:44 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 00:47:44 Check angles 00:47:44 SkyScan query 00:47:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:47:45 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:47:45 Message to Master queued w/err=0: serial=47696 error=0 00:47:50 Received message from Master: op=Filter serial=47697 00:47:50 Color wheel filter change from 0 to 0 00:47:50 FLIGetFilterPos err=0 currentPosition=0 00:47:50 FLIGetStepsRemaining err=0 RemainingSteps=0 00:47:50 Filter is already there-color wheel unchanged 00:47:50 Received message from Master: op=Shutter serial=47698 00:47:50 Shutter LASER close 00:47:50 Received message from Camera: op=State serial=47700 00:47:50 GetSingleValue result=40 Value=cccccccc 00:47:50 SkyScan query 00:47:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:47:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:47:50 Parameters OK 00:47:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:47:50 Set A/D data flow result=40 00:47:50 Set A/D channel type result=40 00:47:50 Set A/D encoding result=40 00:47:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:47:50 Set channel filter=0.000000e+000 result=40 00:47:50 Config A/D Result=40 00:47:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:47:50 Get A/D filter: -9.255963e+061 result=40 00:47:50 Get A/D value=-858993460 result=40 00:47:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:47:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:47:50 Parameters OK 00:47:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:47:50 Set A/D data flow result=40 00:47:50 Set A/D channel type result=40 00:47:50 Set A/D encoding result=40 00:47:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:47:50 Set channel filter=0.000000e+000 result=40 00:47:50 Config A/D Result=40 00:47:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:47:50 Get A/D filter: -9.255963e+061 result=40 00:47:50 Get A/D value=-858993460 result=40 00:47:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:47:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:47:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:47:50 Aux= 00:47:50 Message to Camera, serial 47700 queued 00:48:27 Received message from Master: op=PointingHead serial=47713 00:48:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:48:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:48:28 Point started: ret=0 00:48:28 point_skyscan result=0 00:48:28 Check angles 00:48:28 SkyScan query 00:48:29 SkyScan query done: ret=0 az=109.215<-7281 ze=-81.555<-17437 Statuses=0009 0009 00:48:29 Msec=0 True Az=109.215 Ze=-81.555 Az status=0009 Ze status=0009 00:48:29 Check angles 00:48:29 SkyScan query 00:48:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.99<-18866 Statuses=0008 0009 00:48:30 Msec=750 True Az=112.995 Ze=-102.99 Az status=0008 Ze status=0009 00:48:30 Check angles 00:48:30 SkyScan query 00:48:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.365<-20291 Statuses=0008 0009 00:48:31 Msec=1500 True Az=112.995 Ze=-124.365 Az status=0008 Ze status=0009 00:48:31 Check angles 00:48:31 SkyScan query 00:48:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.32<-21688 Statuses=0008 0009 00:48:31 Msec=2250 True Az=112.995 Ze=-145.32 Az status=0008 Ze status=0009 00:48:31 Check angles 00:48:31 SkyScan query 00:48:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.245<-23083 Statuses=0008 0009 00:48:32 Msec=3000 True Az=112.995 Ze=-166.245 Az status=0008 Ze status=0009 00:48:32 Check angles 00:48:32 SkyScan query 00:48:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:48:33 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:48:33 Message to Master queued w/err=0: serial=47713 error=0 00:48:38 Received message from Master: op=Filter serial=47714 00:48:38 Color wheel filter change from 0 to 0 00:48:38 FLIGetFilterPos err=0 currentPosition=0 00:48:38 FLIGetStepsRemaining err=0 RemainingSteps=0 00:48:38 Filter is already there-color wheel unchanged 00:48:38 Received message from Master: op=Shutter serial=47715 00:48:38 Shutter LASER open 00:48:38 Received message from Camera: op=State serial=47717 00:48:38 GetSingleValue result=40 Value=cccccccc 00:48:38 SkyScan query 00:48:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:48:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:48:39 Parameters OK 00:48:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:48:39 Set A/D data flow result=40 00:48:39 Set A/D channel type result=40 00:48:39 Set A/D encoding result=40 00:48:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:48:39 Set channel filter=0.000000e+000 result=40 00:48:39 Config A/D Result=40 00:48:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:48:39 Get A/D filter: -9.255963e+061 result=40 00:48:39 Get A/D value=-858993460 result=40 00:48:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:48:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:48:39 Parameters OK 00:48:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:48:39 Set A/D data flow result=40 00:48:39 Set A/D channel type result=40 00:48:39 Set A/D encoding result=40 00:48:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:48:39 Set channel filter=0.000000e+000 result=40 00:48:39 Config A/D Result=40 00:48:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:48:39 Get A/D filter: -9.255963e+061 result=40 00:48:39 Get A/D value=-858993460 result=40 00:48:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:48:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:48:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:48:39 Aux= 00:48:39 Message to Camera, serial 47717 queued 00:48:47 Received message from Master: op=Shutter serial=47727 00:48:47 Shutter LASER close 00:48:48 Received message from Master: op=PointingHead serial=47731 00:48:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:48:48 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:48:48 Point started: ret=0 00:48:48 point_skyscan result=0 00:48:49 Check angles 00:48:49 SkyScan query 00:48:49 SkyScan query done: ret=0 az=89.895<-5993 ze=157.35<-1510 Statuses=0009 0009 00:48:49 Msec=0 True Az=89.895 Ze=157.35 Az status=0009 Ze status=0009 00:48:49 Check angles 00:48:49 SkyScan query 00:48:50 SkyScan query done: ret=0 az=71.985<-4799 ze=135.93<-2938 Statuses=0009 0009 00:48:50 Msec=750 True Az=71.985 Ze=135.93 Az status=0009 Ze status=0009 00:48:50 Check angles 00:48:50 SkyScan query 00:48:51 SkyScan query done: ret=0 az=54.45<-3630 ze=114.495<-4367 Statuses=0009 0009 00:48:51 Msec=1500 True Az=54.45 Ze=114.495 Az status=0009 Ze status=0009 00:48:51 Check angles 00:48:51 SkyScan query 00:48:52 SkyScan query done: ret=0 az=40.965<-2731 ze=93.585<-5761 Statuses=0009 0009 00:48:52 Msec=2250 True Az=40.965 Ze=93.585 Az status=0009 Ze status=0009 00:48:52 Check angles 00:48:52 SkyScan query 00:48:52 SkyScan query done: ret=0 az=40.995<-2733 ze=72.6<-7160 Statuses=0008 0009 00:48:52 Msec=3000 True Az=40.995 Ze=72.6 Az status=0008 Ze status=0009 00:48:52 Check angles 00:48:52 SkyScan query 00:48:53 SkyScan query done: ret=0 az=40.995<-2733 ze=52.14<-8524 Statuses=0008 0009 00:48:53 Msec=3750 True Az=40.995 Ze=52.14 Az status=0008 Ze status=0009 00:48:53 Check angles 00:48:53 SkyScan query 00:48:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:48:54 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:48:54 Message to Master queued w/err=0: serial=47731 error=0 00:48:59 Received message from Master: op=Filter serial=47732 00:48:59 Color wheel filter change from 0 to 0 00:48:59 FLIGetFilterPos err=0 currentPosition=0 00:48:59 FLIGetStepsRemaining err=0 RemainingSteps=0 00:48:59 Filter is already there-color wheel unchanged 00:48:59 Received message from Master: op=Shutter serial=47733 00:48:59 Shutter LASER close 00:48:59 Received message from Camera: op=State serial=47735 00:48:59 GetSingleValue result=40 Value=cccccccc 00:48:59 SkyScan query 00:49:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:49:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:49:00 Parameters OK 00:49:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:49:00 Set A/D data flow result=40 00:49:00 Set A/D channel type result=40 00:49:00 Set A/D encoding result=40 00:49:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:49:00 Set channel filter=0.000000e+000 result=40 00:49:00 Config A/D Result=40 00:49:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:49:00 Get A/D filter: -9.255963e+061 result=40 00:49:00 Get A/D value=-858993460 result=40 00:49:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:49:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:49:00 Parameters OK 00:49:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:49:00 Set A/D data flow result=40 00:49:00 Set A/D channel type result=40 00:49:00 Set A/D encoding result=40 00:49:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:49:00 Set channel filter=0.000000e+000 result=40 00:49:00 Config A/D Result=40 00:49:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:49:00 Get A/D filter: -9.255963e+061 result=40 00:49:00 Get A/D value=-858993460 result=40 00:49:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:49:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:49:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:49:00 Aux= 00:49:00 Message to Camera, serial 47735 queued 00:49:37 Received message from Master: op=PointingHead serial=47748 00:49:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:49:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:49:37 Point started: ret=0 00:49:37 point_skyscan result=0 00:49:38 Check angles 00:49:38 SkyScan query 00:49:38 SkyScan query done: ret=0 az=40.995<-2733 ze=21.9<-10540 Statuses=0008 0009 00:49:38 Msec=0 True Az=40.995 Ze=21.9 Az status=0008 Ze status=0009 00:49:38 Check angles 00:49:38 SkyScan query 00:49:39 SkyScan query done: ret=0 az=40.995<-2733 ze=0.945<-11937 Statuses=0008 0009 00:49:39 Msec=750 True Az=40.995 Ze=0.945 Az status=0008 Ze status=0009 00:49:39 Check angles 00:49:39 SkyScan query 00:49:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.43<-13362 Statuses=0008 0009 00:49:40 Msec=1500 True Az=40.995 Ze=-20.43 Az status=0008 Ze status=0009 00:49:40 Check angles 00:49:40 SkyScan query 00:49:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 00:49:41 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 00:49:41 Check angles 00:49:41 SkyScan query 00:49:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 00:49:41 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 00:49:41 Message to Master queued w/err=0: serial=47748 error=0 00:49:46 Received message from Master: op=Filter serial=47749 00:49:46 Color wheel filter change from 0 to 0 00:49:46 FLIGetFilterPos err=0 currentPosition=0 00:49:46 FLIGetStepsRemaining err=0 RemainingSteps=0 00:49:46 Filter is already there-color wheel unchanged 00:49:47 Received message from Master: op=Shutter serial=47750 00:49:47 Shutter LASER close 00:49:47 Received message from Camera: op=State serial=47752 00:49:47 GetSingleValue result=40 Value=cccccccc 00:49:47 SkyScan query 00:49:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:49:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:49:47 Parameters OK 00:49:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:49:47 Set A/D data flow result=40 00:49:47 Set A/D channel type result=40 00:49:47 Set A/D encoding result=40 00:49:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:49:47 Set channel filter=0.000000e+000 result=40 00:49:47 Config A/D Result=40 00:49:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:49:47 Get A/D filter: -9.255963e+061 result=40 00:49:47 Get A/D value=-858993460 result=40 00:49:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:49:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:49:47 Parameters OK 00:49:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:49:47 Set A/D data flow result=40 00:49:47 Set A/D channel type result=40 00:49:47 Set A/D encoding result=40 00:49:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:49:47 Set channel filter=0.000000e+000 result=40 00:49:47 Config A/D Result=40 00:49:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:49:47 Get A/D filter: -9.255963e+061 result=40 00:49:47 Get A/D value=-858993460 result=40 00:49:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:49:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:49:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:49:47 Aux= 00:49:47 Message to Camera, serial 47752 queued 00:50:24 Received message from Master: op=PointingHead serial=47765 00:50:24 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:50:24 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:50:24 Point started: ret=0 00:50:24 point_skyscan result=0 00:50:25 Check angles 00:50:25 SkyScan query 00:50:26 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.175<-16545 Statuses=0009 0009 00:50:26 Msec=0 True Az=63.78 Ze=-68.175 Az status=0009 Ze status=0009 00:50:26 Check angles 00:50:26 SkyScan query 00:50:26 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.145<-17943 Statuses=0009 0009 00:50:26 Msec=750 True Az=81.315 Ze=-89.145 Az status=0009 Ze status=0009 00:50:27 Check angles 00:50:27 SkyScan query 00:50:27 SkyScan query done: ret=0 az=99.045<-6603 ze=-110.1<-19340 Statuses=0009 0009 00:50:27 Msec=1500 True Az=99.045 Ze=-110.1 Az status=0009 Ze status=0009 00:50:27 Check angles 00:50:27 SkyScan query 00:50:28 SkyScan query done: ret=0 az=116.73<-7782 ze=-131.505<-20767 Statuses=0009 0009 00:50:28 Msec=2250 True Az=116.73 Ze=-131.505 Az status=0009 Ze status=0009 00:50:28 Check angles 00:50:28 SkyScan query 00:50:29 SkyScan query done: ret=0 az=131.16<-8744 ze=-141.54<-21436 Statuses=0009 0008 00:50:29 Msec=3000 True Az=131.16 Ze=-141.54 Az status=0009 Ze status=0008 00:50:29 Check angles 00:50:29 SkyScan query 00:50:29 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:50:29 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:50:29 Message to Master queued w/err=0: serial=47765 error=0 00:50:34 Received message from Master: op=Filter serial=47766 00:50:34 Color wheel filter change from 0 to 0 00:50:34 FLIGetFilterPos err=0 currentPosition=0 00:50:34 FLIGetStepsRemaining err=0 RemainingSteps=0 00:50:34 Filter is already there-color wheel unchanged 00:50:35 Received message from Master: op=Shutter serial=47767 00:50:35 Shutter LASER close 00:50:35 Received message from Camera: op=State serial=47769 00:50:35 GetSingleValue result=40 Value=cccccccc 00:50:35 SkyScan query 00:50:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:50:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:50:35 Parameters OK 00:50:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:50:35 Set A/D data flow result=40 00:50:35 Set A/D channel type result=40 00:50:35 Set A/D encoding result=40 00:50:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:50:35 Set channel filter=0.000000e+000 result=40 00:50:35 Config A/D Result=40 00:50:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:50:35 Get A/D filter: -9.255963e+061 result=40 00:50:35 Get A/D value=-858993460 result=40 00:50:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:50:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:50:35 Parameters OK 00:50:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:50:35 Set A/D data flow result=40 00:50:35 Set A/D channel type result=40 00:50:35 Set A/D encoding result=40 00:50:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:50:35 Set channel filter=0.000000e+000 result=40 00:50:35 Config A/D Result=40 00:50:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:50:35 Get A/D filter: -9.255963e+061 result=40 00:50:35 Get A/D value=-858993460 result=40 00:50:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:50:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:50:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:50:35 Aux= 00:50:35 Message to Camera, serial 47769 queued 00:51:11 Received message from Master: op=PointingHead serial=47781 00:51:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:51:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:51:11 Point started: ret=0 00:51:11 point_skyscan result=0 00:51:12 Check angles 00:51:12 SkyScan query 00:51:13 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 00:51:13 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 00:51:13 Check angles 00:51:13 SkyScan query 00:51:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:51:14 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:51:14 Message to Master queued w/err=0: serial=47781 error=0 00:51:19 Received message from Master: op=Filter serial=47782 00:51:19 Color wheel filter change from 0 to 0 00:51:19 FLIGetFilterPos err=0 currentPosition=0 00:51:19 FLIGetStepsRemaining err=0 RemainingSteps=0 00:51:19 Filter is already there-color wheel unchanged 00:51:19 Received message from Master: op=Shutter serial=47783 00:51:19 Shutter LASER open 00:51:19 Received message from Camera: op=State serial=47785 00:51:19 GetSingleValue result=40 Value=cccccccc 00:51:19 SkyScan query 00:51:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:51:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:51:19 Parameters OK 00:51:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:51:19 Set A/D data flow result=40 00:51:19 Set A/D channel type result=40 00:51:19 Set A/D encoding result=40 00:51:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:51:19 Set channel filter=0.000000e+000 result=40 00:51:19 Config A/D Result=40 00:51:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:51:19 Get A/D filter: -9.255963e+061 result=40 00:51:19 Get A/D value=-858993460 result=40 00:51:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:51:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:51:19 Parameters OK 00:51:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:51:19 Set A/D data flow result=40 00:51:19 Set A/D channel type result=40 00:51:19 Set A/D encoding result=40 00:51:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:51:19 Set channel filter=0.000000e+000 result=40 00:51:19 Config A/D Result=40 00:51:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:51:19 Get A/D filter: -9.255963e+061 result=40 00:51:19 Get A/D value=-858993460 result=40 00:51:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:51:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:51:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:51:19 Aux= 00:51:19 Message to Camera, serial 47785 queued 00:51:28 Received message from Master: op=Shutter serial=47795 00:51:28 Shutter LASER close 00:51:28 Received message from Master: op=PointingHead serial=47799 00:51:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:51:28 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:51:29 Point started: ret=0 00:51:29 point_skyscan result=0 00:51:30 Check angles 00:51:30 SkyScan query 00:51:30 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.46<-21564 Statuses=0009 0009 00:51:30 Msec=0 True Az=135.75 Ze=-143.46 Az status=0009 Ze status=0009 00:51:30 Check angles 00:51:30 SkyScan query 00:51:31 SkyScan query done: ret=0 az=153.225<-10215 ze=-122.505<-20167 Statuses=0009 0009 00:51:31 Msec=750 True Az=153.225 Ze=-122.505 Az status=0009 Ze status=0009 00:51:31 Check angles 00:51:31 SkyScan query 00:51:32 SkyScan query done: ret=0 az=170.745<-11383 ze=-101.595<-18773 Statuses=0009 0009 00:51:32 Msec=1500 True Az=170.745 Ze=-101.595 Az status=0009 Ze status=0009 00:51:32 Check angles 00:51:32 SkyScan query 00:51:32 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.565<-17371 Statuses=0008 0009 00:51:32 Msec=2250 True Az=176.025 Ze=-80.565 Az status=0008 Ze status=0009 00:51:33 Check angles 00:51:33 SkyScan query 00:51:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.655<-15977 Statuses=0008 0009 00:51:33 Msec=3000 True Az=175.995 Ze=-59.655 Az status=0008 Ze status=0009 00:51:33 Check angles 00:51:33 SkyScan query 00:51:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:51:34 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:51:34 Message to Master queued w/err=0: serial=47799 error=0 00:51:39 Received message from Master: op=Filter serial=47800 00:51:39 Color wheel filter change from 0 to 0 00:51:39 FLIGetFilterPos err=0 currentPosition=0 00:51:39 FLIGetStepsRemaining err=0 RemainingSteps=0 00:51:39 Filter is already there-color wheel unchanged 00:51:39 Received message from Master: op=Shutter serial=47801 00:51:39 Shutter LASER close 00:51:39 Received message from Camera: op=State serial=47803 00:51:39 GetSingleValue result=40 Value=cccccccc 00:51:39 SkyScan query 00:51:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:51:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:51:40 Parameters OK 00:51:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:51:40 Set A/D data flow result=40 00:51:40 Set A/D channel type result=40 00:51:40 Set A/D encoding result=40 00:51:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:51:40 Set channel filter=0.000000e+000 result=40 00:51:40 Config A/D Result=40 00:51:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:51:40 Get A/D filter: -9.255963e+061 result=40 00:51:40 Get A/D value=-858993460 result=40 00:51:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:51:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:51:40 Parameters OK 00:51:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:51:40 Set A/D data flow result=40 00:51:40 Set A/D channel type result=40 00:51:40 Set A/D encoding result=40 00:51:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:51:40 Set channel filter=0.000000e+000 result=40 00:51:40 Config A/D Result=40 00:51:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:51:40 Get A/D filter: -9.255963e+061 result=40 00:51:40 Get A/D value=-858993460 result=40 00:51:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:51:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:51:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:51:40 Aux= 00:51:40 Message to Camera, serial 47803 queued 00:52:17 Received message from Master: op=PointingHead serial=47816 00:52:17 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:52:17 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:52:17 Point started: ret=0 00:52:17 point_skyscan result=0 00:52:18 Check angles 00:52:18 SkyScan query 00:52:18 SkyScan query done: ret=0 az=152.55<-10170 ze=-21.21<-13414 Statuses=0009 0009 00:52:18 Msec=0 True Az=152.55 Ze=-21.21 Az status=0009 Ze status=0009 00:52:19 Check angles 00:52:19 SkyScan query 00:52:19 SkyScan query done: ret=0 az=134.88<-8992 ze=0.195<-11987 Statuses=0009 0009 00:52:19 Msec=750 True Az=134.88 Ze=0.195 Az status=0009 Ze status=0009 00:52:19 Check angles 00:52:19 SkyScan query 00:52:20 SkyScan query done: ret=0 az=117.405<-7827 ze=20.76<-10616 Statuses=0009 0009 00:52:20 Msec=1500 True Az=117.405 Ze=20.76 Az status=0009 Ze status=0009 00:52:20 Check angles 00:52:20 SkyScan query 00:52:21 SkyScan query done: ret=0 az=100.08<-6672 ze=41.67<-9222 Statuses=0009 0009 00:52:21 Msec=2250 True Az=100.08 Ze=41.67 Az status=0009 Ze status=0009 00:52:21 Check angles 00:52:21 SkyScan query 00:52:21 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 00:52:21 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 00:52:22 Check angles 00:52:22 SkyScan query 00:52:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:52:22 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:52:22 Message to Master queued w/err=0: serial=47816 error=0 00:52:27 Received message from Master: op=Filter serial=47817 00:52:27 Color wheel filter change from 0 to 0 00:52:27 FLIGetFilterPos err=0 currentPosition=0 00:52:27 FLIGetStepsRemaining err=0 RemainingSteps=0 00:52:27 Filter is already there-color wheel unchanged 00:52:27 Received message from Master: op=Shutter serial=47818 00:52:27 Shutter LASER close 00:52:27 Received message from Camera: op=State serial=47820 00:52:27 GetSingleValue result=40 Value=cccccccc 00:52:27 SkyScan query 00:52:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:52:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:52:28 Parameters OK 00:52:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:52:28 Set A/D data flow result=40 00:52:28 Set A/D channel type result=40 00:52:28 Set A/D encoding result=40 00:52:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:52:28 Set channel filter=0.000000e+000 result=40 00:52:28 Config A/D Result=40 00:52:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:52:28 Get A/D filter: -9.255963e+061 result=40 00:52:28 Get A/D value=-858993460 result=40 00:52:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:52:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:52:28 Parameters OK 00:52:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:52:28 Set A/D data flow result=40 00:52:28 Set A/D channel type result=40 00:52:28 Set A/D encoding result=40 00:52:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:52:28 Set channel filter=0.000000e+000 result=40 00:52:28 Config A/D Result=40 00:52:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:52:28 Get A/D filter: -9.255963e+061 result=40 00:52:28 Get A/D value=-858993460 result=40 00:52:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:52:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:52:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:52:28 Aux= 00:52:28 Message to Camera, serial 47820 queued 00:53:05 Received message from Master: op=PointingHead serial=47833 00:53:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:53:05 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:53:05 Point started: ret=0 00:53:05 point_skyscan result=0 00:53:06 Check angles 00:53:06 SkyScan query 00:53:06 SkyScan query done: ret=0 az=109.23<-7282 ze=38.49<-9434 Statuses=0009 0008 00:53:06 Msec=0 True Az=109.23 Ze=38.49 Az status=0009 Ze status=0008 00:53:07 Check angles 00:53:07 SkyScan query 00:53:07 SkyScan query done: ret=0 az=126.96<-8464 ze=38.505<-9433 Statuses=0009 0008 00:53:07 Msec=750 True Az=126.96 Ze=38.505 Az status=0009 Ze status=0008 00:53:07 Check angles 00:53:07 SkyScan query 00:53:08 SkyScan query done: ret=0 az=144.54<-9636 ze=38.505<-9433 Statuses=0009 0008 00:53:08 Msec=1500 True Az=144.54 Ze=38.505 Az status=0009 Ze status=0008 00:53:08 Check angles 00:53:08 SkyScan query 00:53:09 SkyScan query done: ret=0 az=162.3<-10820 ze=38.505<-9433 Statuses=0009 0008 00:53:09 Msec=2250 True Az=162.3 Ze=38.505 Az status=0009 Ze status=0008 00:53:09 Check angles 00:53:09 SkyScan query 00:53:09 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:53:09 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:53:10 Check angles 00:53:10 SkyScan query 00:53:10 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:53:10 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:53:10 Message to Master queued w/err=0: serial=47833 error=0 00:53:15 Received message from Master: op=Filter serial=47834 00:53:15 Color wheel filter change from 0 to 0 00:53:15 FLIGetFilterPos err=0 currentPosition=0 00:53:15 FLIGetStepsRemaining err=0 RemainingSteps=0 00:53:15 Filter is already there-color wheel unchanged 00:53:15 Received message from Master: op=Shutter serial=47835 00:53:15 Shutter LASER close 00:53:15 Received message from Camera: op=State serial=47837 00:53:15 GetSingleValue result=40 Value=cccccccc 00:53:15 SkyScan query 00:53:16 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:53:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:53:16 Parameters OK 00:53:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:53:16 Set A/D data flow result=40 00:53:16 Set A/D channel type result=40 00:53:16 Set A/D encoding result=40 00:53:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:53:16 Set channel filter=0.000000e+000 result=40 00:53:16 Config A/D Result=40 00:53:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:53:16 Get A/D filter: -9.255963e+061 result=40 00:53:16 Get A/D value=-858993460 result=40 00:53:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:53:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:53:16 Parameters OK 00:53:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:53:16 Set A/D data flow result=40 00:53:16 Set A/D channel type result=40 00:53:16 Set A/D encoding result=40 00:53:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:53:16 Set channel filter=0.000000e+000 result=40 00:53:16 Config A/D Result=40 00:53:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:53:16 Get A/D filter: -9.255963e+061 result=40 00:53:16 Get A/D value=-858993460 result=40 00:53:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:53:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:53:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:53:16 Aux= 00:53:16 Message to Camera, serial 47837 queued 00:53:53 Received message from Master: op=PointingHead serial=47850 00:53:53 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:53:53 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:53:53 Point started: ret=0 00:53:53 point_skyscan result=0 00:53:54 Check angles 00:53:54 SkyScan query 00:53:55 SkyScan query done: ret=0 az=152.775<-10185 ze=8.475<-11435 Statuses=0009 0009 00:53:55 Msec=0 True Az=152.775 Ze=8.475 Az status=0009 Ze status=0009 00:53:55 Check angles 00:53:55 SkyScan query 00:53:55 SkyScan query done: ret=0 az=135.345<-9023 ze=-12.495<-12833 Statuses=0009 0009 00:53:55 Msec=750 True Az=135.345 Ze=-12.495 Az status=0009 Ze status=0009 00:53:56 Check angles 00:53:56 SkyScan query 00:53:56 SkyScan query done: ret=0 az=117.75<-7850 ze=-33.405<-14227 Statuses=0009 0009 00:53:56 Msec=1500 True Az=117.75 Ze=-33.405 Az status=0009 Ze status=0009 00:53:56 Check angles 00:53:56 SkyScan query 00:53:57 SkyScan query done: ret=0 az=100.035<-6669 ze=-51.57<-15438 Statuses=0009 0009 00:53:57 Msec=2250 True Az=100.035 Ze=-51.57 Az status=0009 Ze status=0009 00:53:57 Check angles 00:53:57 SkyScan query 00:53:58 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 00:53:58 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 00:53:58 Check angles 00:53:58 SkyScan query 00:53:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:53:58 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:53:58 Message to Master queued w/err=0: serial=47850 error=0 00:54:03 Received message from Master: op=Filter serial=47851 00:54:03 Color wheel filter change from 0 to 0 00:54:03 FLIGetFilterPos err=0 currentPosition=0 00:54:03 FLIGetStepsRemaining err=0 RemainingSteps=0 00:54:03 Filter is already there-color wheel unchanged 00:54:04 Received message from Master: op=Shutter serial=47852 00:54:04 Shutter LASER close 00:54:04 Received message from Camera: op=State serial=47854 00:54:04 GetSingleValue result=40 Value=cccccccc 00:54:04 SkyScan query 00:54:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:54:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:54:04 Parameters OK 00:54:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:54:04 Set A/D data flow result=40 00:54:04 Set A/D channel type result=40 00:54:04 Set A/D encoding result=40 00:54:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:54:04 Set channel filter=0.000000e+000 result=40 00:54:04 Config A/D Result=40 00:54:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:54:04 Get A/D filter: -9.255963e+061 result=40 00:54:04 Get A/D value=-858993460 result=40 00:54:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:54:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:54:04 Parameters OK 00:54:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:54:04 Set A/D data flow result=40 00:54:04 Set A/D channel type result=40 00:54:04 Set A/D encoding result=40 00:54:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:54:04 Set channel filter=0.000000e+000 result=40 00:54:04 Config A/D Result=40 00:54:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:54:04 Get A/D filter: -9.255963e+061 result=40 00:54:04 Get A/D value=-858993460 result=40 00:54:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:54:04 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:54:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:54:04 Aux= 00:54:04 Message to Camera, serial 47854 queued 00:54:41 Received message from Master: op=PointingHead serial=47867 00:54:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:54:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:54:41 Point started: ret=0 00:54:41 point_skyscan result=0 00:54:42 Check angles 00:54:42 SkyScan query 00:54:43 SkyScan query done: ret=0 az=108.81<-7254 ze=-81.075<-17405 Statuses=0009 0009 00:54:43 Msec=0 True Az=108.81 Ze=-81.075 Az status=0009 Ze status=0009 00:54:43 Check angles 00:54:43 SkyScan query 00:54:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.03<-18802 Statuses=0008 0009 00:54:43 Msec=750 True Az=112.995 Ze=-102.03 Az status=0008 Ze status=0009 00:54:44 Check angles 00:54:44 SkyScan query 00:54:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.97<-20198 Statuses=0008 0009 00:54:44 Msec=1500 True Az=112.995 Ze=-122.97 Az status=0008 Ze status=0009 00:54:44 Check angles 00:54:44 SkyScan query 00:54:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.91<-21594 Statuses=0008 0009 00:54:45 Msec=2250 True Az=112.995 Ze=-143.91 Az status=0008 Ze status=0009 00:54:45 Check angles 00:54:45 SkyScan query 00:54:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.865<-22991 Statuses=0008 0009 00:54:46 Msec=3000 True Az=112.995 Ze=-164.865 Az status=0008 Ze status=0009 00:54:46 Check angles 00:54:46 SkyScan query 00:54:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 00:54:46 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 00:54:46 Message to Master queued w/err=0: serial=47867 error=0 00:54:51 Received message from Master: op=Filter serial=47868 00:54:51 Color wheel filter change from 0 to 0 00:54:51 FLIGetFilterPos err=0 currentPosition=0 00:54:51 FLIGetStepsRemaining err=0 RemainingSteps=0 00:54:51 Filter is already there-color wheel unchanged 00:54:52 Received message from Master: op=Shutter serial=47869 00:54:52 Shutter LASER open 00:54:52 Received message from Camera: op=State serial=47871 00:54:52 GetSingleValue result=40 Value=cccccccc 00:54:52 SkyScan query 00:54:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:54:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:54:52 Parameters OK 00:54:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:54:52 Set A/D data flow result=40 00:54:52 Set A/D channel type result=40 00:54:52 Set A/D encoding result=40 00:54:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:54:52 Set channel filter=0.000000e+000 result=40 00:54:52 Config A/D Result=40 00:54:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:54:52 Get A/D filter: -9.255963e+061 result=40 00:54:52 Get A/D value=-858993460 result=40 00:54:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:54:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:54:52 Parameters OK 00:54:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:54:52 Set A/D data flow result=40 00:54:52 Set A/D channel type result=40 00:54:52 Set A/D encoding result=40 00:54:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:54:52 Set channel filter=0.000000e+000 result=40 00:54:52 Config A/D Result=40 00:54:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:54:52 Get A/D filter: -9.255963e+061 result=40 00:54:52 Get A/D value=-858993460 result=40 00:54:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:54:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:54:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:54:52 Aux= 00:54:52 Message to Camera, serial 47871 queued 00:55:01 Received message from Master: op=Shutter serial=47881 00:55:01 Shutter LASER close 00:55:01 Received message from Master: op=PointingHead serial=47885 00:55:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:55:01 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:55:02 Point started: ret=0 00:55:02 point_skyscan result=0 00:55:02 Check angles 00:55:02 SkyScan query 00:55:03 SkyScan query done: ret=0 az=89.91<-5994 ze=157.23<-1518 Statuses=0009 0009 00:55:03 Msec=0 True Az=89.91 Ze=157.23 Az status=0009 Ze status=0009 00:55:03 Check angles 00:55:03 SkyScan query 00:55:04 SkyScan query done: ret=0 az=72<-4800 ze=135.825<-2945 Statuses=0009 0009 00:55:04 Msec=750 True Az=72 Ze=135.825 Az status=0009 Ze status=0009 00:55:04 Check angles 00:55:04 SkyScan query 00:55:04 SkyScan query done: ret=0 az=54.78<-3652 ze=114.855<-4343 Statuses=0009 0009 00:55:04 Msec=1500 True Az=54.78 Ze=114.855 Az status=0009 Ze status=0009 00:55:05 Check angles 00:55:05 SkyScan query 00:55:05 SkyScan query done: ret=0 az=40.905<-2727 ze=93.9<-5740 Statuses=0009 0009 00:55:05 Msec=2250 True Az=40.905 Ze=93.9 Az status=0009 Ze status=0009 00:55:05 Check angles 00:55:05 SkyScan query 00:55:06 SkyScan query done: ret=0 az=40.995<-2733 ze=72.465<-7169 Statuses=0008 0009 00:55:06 Msec=3000 True Az=40.995 Ze=72.465 Az status=0008 Ze status=0009 00:55:06 Check angles 00:55:06 SkyScan query 00:55:07 SkyScan query done: ret=0 az=40.995<-2733 ze=52.08<-8528 Statuses=0008 0009 00:55:07 Msec=3750 True Az=40.995 Ze=52.08 Az status=0008 Ze status=0009 00:55:07 Check angles 00:55:07 SkyScan query 00:55:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:55:08 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:55:08 Message to Master queued w/err=0: serial=47885 error=0 00:55:13 Received message from Master: op=Filter serial=47886 00:55:13 Color wheel filter change from 0 to 0 00:55:13 FLIGetFilterPos err=0 currentPosition=0 00:55:13 FLIGetStepsRemaining err=0 RemainingSteps=0 00:55:13 Filter is already there-color wheel unchanged 00:55:13 Received message from Master: op=Shutter serial=47887 00:55:13 Shutter LASER close 00:55:13 Received message from Camera: op=State serial=47889 00:55:13 GetSingleValue result=40 Value=cccccccc [UTC 2018-12-11 00:55:13] 00:55:13 SkyScan query 00:55:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:55:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:55:13 Parameters OK 00:55:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:55:13 Set A/D data flow result=40 00:55:13 Set A/D channel type result=40 00:55:13 Set A/D encoding result=40 00:55:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:55:13 Set channel filter=0.000000e+000 result=40 00:55:13 Config A/D Result=40 00:55:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:55:13 Get A/D filter: -9.255963e+061 result=40 00:55:13 Get A/D value=-858993460 result=40 00:55:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:55:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:55:13 Parameters OK 00:55:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:55:13 Set A/D data flow result=40 00:55:13 Set A/D channel type result=40 00:55:13 Set A/D encoding result=40 00:55:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:55:13 Set channel filter=0.000000e+000 result=40 00:55:13 Config A/D Result=40 00:55:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:55:13 Get A/D filter: -9.255963e+061 result=40 00:55:13 Get A/D value=-858993460 result=40 00:55:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:55:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:55:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:55:13 Aux= 00:55:13 Message to Camera, serial 47889 queued 00:55:50 Received message from Master: op=PointingHead serial=47902 00:55:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:55:50 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:55:51 Point started: ret=0 00:55:51 point_skyscan result=0 00:55:51 Check angles 00:55:51 SkyScan query 00:55:52 SkyScan query done: ret=0 az=40.995<-2733 ze=21.84<-10544 Statuses=0008 0009 00:55:52 Msec=0 True Az=40.995 Ze=21.84 Az status=0008 Ze status=0009 00:55:52 Check angles 00:55:52 SkyScan query 00:55:53 SkyScan query done: ret=0 az=40.995<-2733 ze=0.45<-11970 Statuses=0008 0009 00:55:53 Msec=750 True Az=40.995 Ze=0.45 Az status=0008 Ze status=0009 00:55:53 Check angles 00:55:53 SkyScan query 00:55:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.49<-13366 Statuses=0008 0009 00:55:54 Msec=1500 True Az=40.995 Ze=-20.49 Az status=0008 Ze status=0009 00:55:54 Check angles 00:55:54 SkyScan query 00:55:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 00:55:54 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 [UTC 2018-12-11 00:55:54] 00:55:54 Check angles 00:55:54 SkyScan query 00:55:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 00:55:55 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 00:55:55 Message to Master queued w/err=0: serial=47902 error=0 00:56:00 Received message from Master: op=Filter serial=47903 00:56:00 Color wheel filter change from 0 to 0 00:56:00 FLIGetFilterPos err=0 currentPosition=0 00:56:00 FLIGetStepsRemaining err=0 RemainingSteps=0 00:56:00 Filter is already there-color wheel unchanged 00:56:00 Received message from Master: op=Shutter serial=47904 00:56:00 Shutter LASER close 00:56:00 Received message from Camera: op=State serial=47906 00:56:00 GetSingleValue result=40 Value=cccccccc 00:56:00 SkyScan query 00:56:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:56:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:56:01 Parameters OK 00:56:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:56:01 Set A/D data flow result=40 00:56:01 Set A/D channel type result=40 00:56:01 Set A/D encoding result=40 00:56:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:56:01 Set channel filter=0.000000e+000 result=40 00:56:01 Config A/D Result=40 00:56:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:56:01 Get A/D filter: -9.255963e+061 result=40 00:56:01 Get A/D value=-858993460 result=40 00:56:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:56:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:56:01 Parameters OK 00:56:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:56:01 Set A/D data flow result=40 00:56:01 Set A/D channel type result=40 00:56:01 Set A/D encoding result=40 00:56:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:56:01 Set channel filter=0.000000e+000 result=40 00:56:01 Config A/D Result=40 00:56:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:56:01 Get A/D filter: -9.255963e+061 result=40 00:56:01 Get A/D value=-858993460 result=40 00:56:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:56:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:56:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:56:01 Aux= 00:56:01 Message to Camera, serial 47906 queued 00:56:38 Received message from Master: op=PointingHead serial=47919 00:56:38 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:56:38 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:56:38 Point started: ret=0 00:56:38 point_skyscan result=0 00:56:39 Check angles 00:56:39 SkyScan query 00:56:39 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.34<-16556 Statuses=0009 0009 00:56:39 Msec=0 True Az=63.96 Ze=-68.34 Az status=0009 Ze status=0009 00:56:40 Check angles 00:56:40 SkyScan query 00:56:40 SkyScan query done: ret=0 az=82.11<-5474 ze=-89.775<-17985 Statuses=0009 0009 00:56:40 Msec=750 True Az=82.11 Ze=-89.775 Az status=0009 Ze status=0009 00:56:40 Check angles 00:56:40 SkyScan query 00:56:41 SkyScan query done: ret=0 az=99.435<-6629 ze=-110.805<-19387 Statuses=0009 0009 00:56:41 Msec=1500 True Az=99.435 Ze=-110.805 Az status=0009 Ze status=0009 00:56:41 Check angles 00:56:41 SkyScan query 00:56:42 SkyScan query done: ret=0 az=116.94<-7796 ze=-131.7<-20780 Statuses=0009 0009 00:56:42 Msec=2250 True Az=116.94 Ze=-131.7 Az status=0009 Ze status=0009 00:56:42 Check angles 00:56:42 SkyScan query 00:56:42 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 00:56:42 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 00:56:43 Check angles 00:56:43 SkyScan query 00:56:43 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:56:43 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:56:43 Message to Master queued w/err=0: serial=47919 error=0 00:56:48 Received message from Master: op=Filter serial=47920 00:56:48 Color wheel filter change from 0 to 0 00:56:48 FLIGetFilterPos err=0 currentPosition=0 00:56:48 FLIGetStepsRemaining err=0 RemainingSteps=0 00:56:48 Filter is already there-color wheel unchanged 00:56:48 Received message from Master: op=Shutter serial=47921 00:56:48 Shutter LASER close 00:56:48 Received message from Camera: op=State serial=47923 00:56:48 GetSingleValue result=40 Value=cccccccc 00:56:48 SkyScan query 00:56:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:56:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:56:49 Parameters OK 00:56:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:56:49 Set A/D data flow result=40 00:56:49 Set A/D channel type result=40 00:56:49 Set A/D encoding result=40 00:56:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:56:49 Set channel filter=0.000000e+000 result=40 00:56:49 Config A/D Result=40 00:56:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:56:49 Get A/D filter: -9.255963e+061 result=40 00:56:49 Get A/D value=-858993460 result=40 00:56:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:56:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:56:49 Parameters OK 00:56:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:56:49 Set A/D data flow result=40 00:56:49 Set A/D channel type result=40 00:56:49 Set A/D encoding result=40 00:56:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:56:49 Set channel filter=0.000000e+000 result=40 00:56:49 Config A/D Result=40 00:56:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:56:49 Get A/D filter: -9.255963e+061 result=40 00:56:49 Get A/D value=-858993460 result=40 00:56:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:56:49 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:56:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:56:49 Aux= 00:56:49 Message to Camera, serial 47923 queued 00:57:26 Received message from Master: op=PointingHead serial=47936 00:57:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:57:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:57:26 Point started: ret=0 00:57:26 point_skyscan result=0 00:57:27 Check angles 00:57:27 SkyScan query 00:57:27 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.3<-23420 Statuses=0009 0009 00:57:27 Msec=0 True Az=113.01 Ze=-171.3 Az status=0009 Ze status=0009 00:57:28 Check angles 00:57:28 SkyScan query 00:57:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:57:28 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:57:28 Message to Master queued w/err=0: serial=47936 error=0 00:57:33 Received message from Master: op=Filter serial=47937 00:57:33 Color wheel filter change from 0 to 0 00:57:33 FLIGetFilterPos err=0 currentPosition=0 00:57:33 FLIGetStepsRemaining err=0 RemainingSteps=0 00:57:33 Filter is already there-color wheel unchanged 00:57:33 Received message from Master: op=Shutter serial=47938 00:57:33 Shutter LASER open 00:57:34 Received message from Camera: op=State serial=47940 00:57:34 GetSingleValue result=40 Value=cccccccc 00:57:34 SkyScan query 00:57:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:57:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:57:34 Parameters OK 00:57:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:57:34 Set A/D data flow result=40 00:57:34 Set A/D channel type result=40 00:57:34 Set A/D encoding result=40 00:57:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:57:34 Set channel filter=0.000000e+000 result=40 00:57:34 Config A/D Result=40 00:57:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:57:34 Get A/D filter: -9.255963e+061 result=40 00:57:34 Get A/D value=-858993460 result=40 00:57:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:57:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:57:34 Parameters OK 00:57:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:57:34 Set A/D data flow result=40 00:57:34 Set A/D channel type result=40 00:57:34 Set A/D encoding result=40 00:57:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:57:34 Set channel filter=0.000000e+000 result=40 00:57:34 Config A/D Result=40 00:57:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:57:34 Get A/D filter: -9.255963e+061 result=40 00:57:34 Get A/D value=-858993460 result=40 00:57:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:57:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:57:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:57:34 Aux= 00:57:34 Message to Camera, serial 47940 queued 00:57:43 Received message from Master: op=Shutter serial=47950 00:57:43 Shutter LASER close 00:57:43 Received message from Master: op=PointingHead serial=47954 00:57:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:57:43 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:57:44 Point started: ret=0 00:57:44 point_skyscan result=0 00:57:44 Check angles 00:57:44 SkyScan query 00:57:45 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.505<-21567 Statuses=0009 0009 00:57:45 Msec=0 True Az=135.765 Ze=-143.505 Az status=0009 Ze status=0009 00:57:45 Check angles 00:57:45 SkyScan query 00:57:46 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.07<-20138 Statuses=0009 0009 00:57:46 Msec=750 True Az=153.63 Ze=-122.07 Az status=0009 Ze status=0009 00:57:46 Check angles 00:57:46 SkyScan query 00:57:46 SkyScan query done: ret=0 az=171.09<-11406 ze=-101.19<-18746 Statuses=0009 0009 00:57:46 Msec=1500 True Az=171.09 Ze=-101.19 Az status=0009 Ze status=0009 00:57:47 Check angles 00:57:47 SkyScan query 00:57:47 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.205<-17347 Statuses=0008 0009 00:57:47 Msec=2250 True Az=176.025 Ze=-80.205 Az status=0008 Ze status=0009 00:57:47 Check angles 00:57:47 SkyScan query 00:57:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.77<-15918 Statuses=0008 0009 00:57:48 Msec=3000 True Az=175.995 Ze=-58.77 Az status=0008 Ze status=0009 00:57:48 Check angles 00:57:48 SkyScan query 00:57:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 00:57:49 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 00:57:49 Message to Master queued w/err=0: serial=47954 error=0 00:57:54 Received message from Master: op=Filter serial=47955 00:57:54 Color wheel filter change from 0 to 0 00:57:54 FLIGetFilterPos err=0 currentPosition=0 00:57:54 FLIGetStepsRemaining err=0 RemainingSteps=0 00:57:54 Filter is already there-color wheel unchanged 00:57:54 Received message from Master: op=Shutter serial=47956 00:57:54 Shutter LASER close 00:57:54 Received message from Camera: op=State serial=47958 00:57:54 GetSingleValue result=40 Value=cccccccc 00:57:54 SkyScan query 00:57:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:57:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:57:55 Parameters OK 00:57:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:57:55 Set A/D data flow result=40 00:57:55 Set A/D channel type result=40 00:57:55 Set A/D encoding result=40 00:57:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:57:55 Set channel filter=0.000000e+000 result=40 00:57:55 Config A/D Result=40 00:57:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:57:55 Get A/D filter: -9.255963e+061 result=40 00:57:55 Get A/D value=-858993460 result=40 00:57:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:57:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:57:55 Parameters OK 00:57:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:57:55 Set A/D data flow result=40 00:57:55 Set A/D channel type result=40 00:57:55 Set A/D encoding result=40 00:57:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:57:55 Set channel filter=0.000000e+000 result=40 00:57:55 Config A/D Result=40 00:57:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:57:55 Get A/D filter: -9.255963e+061 result=40 00:57:55 Get A/D value=-858993460 result=40 00:57:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:57:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:57:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:57:55 Aux= 00:57:55 Message to Camera, serial 47958 queued 00:58:31 Received message from Master: op=PointingHead serial=47971 00:58:31 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:58:31 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:58:32 Point started: ret=0 00:58:32 point_skyscan result=0 00:58:32 Check angles 00:58:32 SkyScan query 00:58:33 SkyScan query done: ret=0 az=153<-10200 ze=-21.87<-13458 Statuses=0009 0009 00:58:33 Msec=0 True Az=153 Ze=-21.87 Az status=0009 Ze status=0009 00:58:33 Check angles 00:58:33 SkyScan query 00:58:34 SkyScan query done: ret=0 az=135.66<-9044 ze=-0.885<-12059 Statuses=0009 0009 00:58:34 Msec=750 True Az=135.66 Ze=-0.885 Az status=0009 Ze status=0009 00:58:34 Check angles 00:58:34 SkyScan query 00:58:35 SkyScan query done: ret=0 az=118.095<-7873 ze=20.085<-10661 Statuses=0009 0009 00:58:35 Msec=1500 True Az=118.095 Ze=20.085 Az status=0009 Ze status=0009 00:58:35 Check angles 00:58:35 SkyScan query 00:58:35 SkyScan query done: ret=0 az=100.575<-6705 ze=41.04<-9264 Statuses=0009 0009 00:58:35 Msec=2250 True Az=100.575 Ze=41.04 Az status=0009 Ze status=0009 00:58:35 Check angles 00:58:35 SkyScan query 00:58:36 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 00:58:36 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 00:58:36 Check angles 00:58:36 SkyScan query 00:58:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:58:37 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:58:37 Message to Master queued w/err=0: serial=47971 error=0 00:58:42 Received message from Master: op=Filter serial=47972 00:58:42 Color wheel filter change from 0 to 0 00:58:42 FLIGetFilterPos err=0 currentPosition=0 00:58:42 FLIGetStepsRemaining err=0 RemainingSteps=0 00:58:42 Filter is already there-color wheel unchanged 00:58:42 Received message from Master: op=Shutter serial=47973 00:58:42 Shutter LASER close 00:58:42 Received message from Camera: op=State serial=47975 00:58:42 GetSingleValue result=40 Value=cccccccc 00:58:42 SkyScan query 00:58:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:58:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:58:43 Parameters OK 00:58:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:58:43 Set A/D data flow result=40 00:58:43 Set A/D channel type result=40 00:58:43 Set A/D encoding result=40 00:58:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:58:43 Set channel filter=0.000000e+000 result=40 00:58:43 Config A/D Result=40 00:58:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:58:43 Get A/D filter: -9.255963e+061 result=40 00:58:43 Get A/D value=-858993460 result=40 00:58:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:58:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:58:43 Parameters OK 00:58:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:58:43 Set A/D data flow result=40 00:58:43 Set A/D channel type result=40 00:58:43 Set A/D encoding result=40 00:58:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:58:43 Set channel filter=0.000000e+000 result=40 00:58:43 Config A/D Result=40 00:58:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:58:43 Get A/D filter: -9.255963e+061 result=40 00:58:43 Get A/D value=-858993460 result=40 00:58:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:58:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:58:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:58:43 Aux= 00:58:43 Message to Camera, serial 47975 queued 00:59:19 Received message from Master: op=PointingHead serial=47988 00:59:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:59:19 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:59:20 Point started: ret=0 00:59:20 point_skyscan result=0 00:59:21 Check angles 00:59:21 SkyScan query 00:59:21 SkyScan query done: ret=0 az=109.425<-7295 ze=38.49<-9434 Statuses=0009 0008 00:59:21 Msec=0 True Az=109.425 Ze=38.49 Az status=0009 Ze status=0008 00:59:21 Check angles 00:59:21 SkyScan query 00:59:22 SkyScan query done: ret=0 az=126.855<-8457 ze=38.505<-9433 Statuses=0009 0008 00:59:22 Msec=750 True Az=126.855 Ze=38.505 Az status=0009 Ze status=0008 00:59:22 Check angles 00:59:22 SkyScan query 00:59:23 SkyScan query done: ret=0 az=144.315<-9621 ze=38.505<-9433 Statuses=0009 0008 00:59:23 Msec=1500 True Az=144.315 Ze=38.505 Az status=0009 Ze status=0008 00:59:23 Check angles 00:59:23 SkyScan query 00:59:23 SkyScan query done: ret=0 az=162.12<-10808 ze=38.505<-9433 Statuses=0009 0008 00:59:23 Msec=2250 True Az=162.12 Ze=38.505 Az status=0009 Ze status=0008 00:59:24 Check angles 00:59:24 SkyScan query 00:59:24 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:59:24 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:59:24 Check angles 00:59:24 SkyScan query 00:59:25 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:59:25 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:59:25 Message to Master queued w/err=0: serial=47988 error=0 00:59:30 Received message from Master: op=Filter serial=47989 00:59:30 Color wheel filter change from 0 to 0 00:59:30 FLIGetFilterPos err=0 currentPosition=0 00:59:30 FLIGetStepsRemaining err=0 RemainingSteps=0 00:59:30 Filter is already there-color wheel unchanged 00:59:30 Received message from Master: op=Shutter serial=47990 00:59:30 Shutter LASER close 00:59:30 Received message from Camera: op=State serial=47992 00:59:30 GetSingleValue result=40 Value=cccccccc 00:59:30 SkyScan query 00:59:31 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:59:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:59:31 Parameters OK 00:59:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:59:31 Set A/D data flow result=40 00:59:31 Set A/D channel type result=40 00:59:31 Set A/D encoding result=40 00:59:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:59:31 Set channel filter=0.000000e+000 result=40 00:59:31 Config A/D Result=40 00:59:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:59:31 Get A/D filter: -9.255963e+061 result=40 00:59:31 Get A/D value=-858993460 result=40 00:59:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:59:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:59:31 Parameters OK 00:59:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:59:31 Set A/D data flow result=40 00:59:31 Set A/D channel type result=40 00:59:31 Set A/D encoding result=40 00:59:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:59:31 Set channel filter=0.000000e+000 result=40 00:59:31 Config A/D Result=40 00:59:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:59:31 Get A/D filter: -9.255963e+061 result=40 00:59:31 Get A/D value=-858993460 result=40 00:59:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:59:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:59:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:59:31 Aux= 00:59:31 Message to Camera, serial 47992 queued 01:00:07 Received message from Master: op=PointingHead serial=48004 01:00:07 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:00:07 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:00:07 Point started: ret=0 01:00:07 point_skyscan result=0 01:00:08 Check angles 01:00:08 SkyScan query 01:00:08 SkyScan query done: ret=0 az=152.955<-10197 ze=8.7<-11420 Statuses=0009 0009 01:00:08 Msec=0 True Az=152.955 Ze=8.7 Az status=0009 Ze status=0009 01:00:08 Check angles 01:00:08 SkyScan query 01:00:09 SkyScan query done: ret=0 az=135.465<-9031 ze=-12.255<-12817 Statuses=0009 0009 01:00:09 Msec=750 True Az=135.465 Ze=-12.255 Az status=0009 Ze status=0009 01:00:09 Check angles 01:00:09 SkyScan query 01:00:10 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.6<-14240 Statuses=0009 0009 01:00:10 Msec=1500 True Az=117.54 Ze=-33.6 Az status=0009 Ze status=0009 01:00:10 Check angles 01:00:10 SkyScan query 01:00:11 SkyScan query done: ret=0 az=100.185<-6679 ze=-51.57<-15438 Statuses=0009 0009 01:00:11 Msec=2250 True Az=100.185 Ze=-51.57 Az status=0009 Ze status=0009 01:00:11 Check angles 01:00:11 SkyScan query 01:00:11 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.525<-15435 Statuses=0009 0008 01:00:11 Msec=3000 True Az=86.055 Ze=-51.525 Az status=0009 Ze status=0008 01:00:11 Check angles 01:00:11 SkyScan query 01:00:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:00:12 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:00:12 Message to Master queued w/err=0: serial=48004 error=0 01:00:17 Received message from Master: op=Filter serial=48005 01:00:17 Color wheel filter change from 0 to 0 01:00:17 FLIGetFilterPos err=0 currentPosition=0 01:00:17 FLIGetStepsRemaining err=0 RemainingSteps=0 01:00:17 Filter is already there-color wheel unchanged 01:00:17 Received message from Master: op=Shutter serial=48006 01:00:17 Shutter LASER close 01:00:17 Received message from Camera: op=State serial=48008 01:00:17 GetSingleValue result=40 Value=cccccccc 01:00:17 SkyScan query 01:00:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:00:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:00:18 Parameters OK 01:00:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:00:18 Set A/D data flow result=40 01:00:18 Set A/D channel type result=40 01:00:18 Set A/D encoding result=40 01:00:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:00:18 Set channel filter=0.000000e+000 result=40 01:00:18 Config A/D Result=40 01:00:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:00:18 Get A/D filter: -9.255963e+061 result=40 01:00:18 Get A/D value=-858993460 result=40 01:00:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:00:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:00:18 Parameters OK 01:00:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:00:18 Set A/D data flow result=40 01:00:18 Set A/D channel type result=40 01:00:18 Set A/D encoding result=40 01:00:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:00:18 Set channel filter=0.000000e+000 result=40 01:00:18 Config A/D Result=40 01:00:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:00:18 Get A/D filter: -9.255963e+061 result=40 01:00:18 Get A/D value=-858993460 result=40 01:00:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:00:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:00:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:00:18 Aux= 01:00:18 Message to Camera, serial 48008 queued 01:00:55 Received message from Master: op=PointingHead serial=48021 01:00:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:00:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:00:55 Point started: ret=0 01:00:55 point_skyscan result=0 01:00:56 Check angles 01:00:56 SkyScan query 01:00:56 SkyScan query done: ret=0 az=108.855<-7257 ze=-81.06<-17404 Statuses=0009 0009 01:00:56 Msec=0 True Az=108.855 Ze=-81.06 Az status=0009 Ze status=0009 01:00:57 Check angles 01:00:57 SkyScan query 01:00:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.435<-18829 Statuses=0008 0009 01:00:57 Msec=750 True Az=112.995 Ze=-102.435 Az status=0008 Ze status=0009 01:00:57 Check angles 01:00:57 SkyScan query 01:00:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.39<-20226 Statuses=0008 0009 01:00:58 Msec=1500 True Az=112.995 Ze=-123.39 Az status=0008 Ze status=0009 01:00:58 Check angles 01:00:58 SkyScan query 01:00:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.39<-21626 Statuses=0008 0009 01:00:59 Msec=2250 True Az=112.995 Ze=-144.39 Az status=0008 Ze status=0009 01:00:59 Check angles 01:00:59 SkyScan query 01:00:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.33<-23022 Statuses=0008 0009 01:00:59 Msec=3000 True Az=112.995 Ze=-165.33 Az status=0008 Ze status=0009 01:01:00 Check angles 01:01:00 SkyScan query 01:01:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:01:00 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:01:00 Message to Master queued w/err=0: serial=48021 error=0 01:01:05 Received message from Master: op=Filter serial=48022 01:01:05 Color wheel filter change from 0 to 0 01:01:05 FLIGetFilterPos err=0 currentPosition=0 01:01:05 FLIGetStepsRemaining err=0 RemainingSteps=0 01:01:05 Filter is already there-color wheel unchanged 01:01:05 Received message from Master: op=Shutter serial=48023 01:01:05 Shutter LASER open 01:01:05 Received message from Camera: op=State serial=48025 01:01:05 GetSingleValue result=40 Value=cccccccc 01:01:05 SkyScan query 01:01:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:01:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:01:06 Parameters OK 01:01:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:01:06 Set A/D data flow result=40 01:01:06 Set A/D channel type result=40 01:01:06 Set A/D encoding result=40 01:01:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:01:06 Set channel filter=0.000000e+000 result=40 01:01:06 Config A/D Result=40 01:01:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:01:06 Get A/D filter: -9.255963e+061 result=40 01:01:06 Get A/D value=-858993460 result=40 01:01:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:01:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:01:06 Parameters OK 01:01:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:01:06 Set A/D data flow result=40 01:01:06 Set A/D channel type result=40 01:01:06 Set A/D encoding result=40 01:01:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:01:06 Set channel filter=0.000000e+000 result=40 01:01:06 Config A/D Result=40 01:01:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:01:06 Get A/D filter: -9.255963e+061 result=40 01:01:06 Get A/D value=-858993460 result=40 01:01:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:01:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:01:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:01:06 Aux= 01:01:06 Message to Camera, serial 48025 queued 01:01:14 Received message from Master: op=Shutter serial=48035 01:01:14 Shutter LASER close 01:01:15 Received message from Master: op=PointingHead serial=48039 01:01:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:01:15 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:01:15 Point started: ret=0 01:01:15 point_skyscan result=0 01:01:16 Check angles 01:01:16 SkyScan query 01:01:17 SkyScan query done: ret=0 az=89.85<-5990 ze=157.2<-1520 Statuses=0009 0009 01:01:17 Msec=0 True Az=89.85 Ze=157.2 Az status=0009 Ze status=0009 01:01:17 Check angles 01:01:17 SkyScan query 01:01:17 SkyScan query done: ret=0 az=72.3<-4820 ze=136.23<-2918 Statuses=0009 0009 01:01:17 Msec=750 True Az=72.3 Ze=136.23 Az status=0009 Ze status=0009 01:01:18 Check angles 01:01:18 SkyScan query 01:01:18 SkyScan query done: ret=0 az=54.96<-3664 ze=115.305<-4313 Statuses=0009 0009 01:01:18 Msec=1500 True Az=54.96 Ze=115.305 Az status=0009 Ze status=0009 01:01:18 Check angles 01:01:18 SkyScan query 01:01:19 SkyScan query done: ret=0 az=40.86<-2724 ze=94.275<-5715 Statuses=0009 0009 01:01:19 Msec=2250 True Az=40.86 Ze=94.275 Az status=0009 Ze status=0009 01:01:19 Check angles 01:01:19 SkyScan query 01:01:20 SkyScan query done: ret=0 az=40.995<-2733 ze=73.38<-7108 Statuses=0008 0009 01:01:20 Msec=3000 True Az=40.995 Ze=73.38 Az status=0008 Ze status=0009 01:01:20 Check angles 01:01:20 SkyScan query 01:01:20 SkyScan query done: ret=0 az=40.995<-2733 ze=52.815<-8479 Statuses=0008 0009 01:01:20 Msec=3750 True Az=40.995 Ze=52.815 Az status=0008 Ze status=0009 01:01:21 Check angles 01:01:21 SkyScan query 01:01:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:01:21 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:01:21 Message to Master queued w/err=0: serial=48039 error=0 01:01:26 Received message from Master: op=Filter serial=48040 01:01:26 Color wheel filter change from 0 to 0 01:01:26 FLIGetFilterPos err=0 currentPosition=0 01:01:26 FLIGetStepsRemaining err=0 RemainingSteps=0 01:01:26 Filter is already there-color wheel unchanged 01:01:26 Received message from Master: op=Shutter serial=48041 01:01:26 Shutter LASER close 01:01:26 Received message from Camera: op=State serial=48043 01:01:26 GetSingleValue result=40 Value=cccccccc 01:01:26 SkyScan query 01:01:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:01:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:01:27 Parameters OK 01:01:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:01:27 Set A/D data flow result=40 01:01:27 Set A/D channel type result=40 01:01:27 Set A/D encoding result=40 01:01:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:01:27 Set channel filter=0.000000e+000 result=40 01:01:27 Config A/D Result=40 01:01:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:01:27 Get A/D filter: -9.255963e+061 result=40 01:01:27 Get A/D value=-858993460 result=40 01:01:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:01:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:01:27 Parameters OK 01:01:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:01:27 Set A/D data flow result=40 01:01:27 Set A/D channel type result=40 01:01:27 Set A/D encoding result=40 01:01:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:01:27 Set channel filter=0.000000e+000 result=40 01:01:27 Config A/D Result=40 01:01:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:01:27 Get A/D filter: -9.255963e+061 result=40 01:01:27 Get A/D value=-858993460 result=40 01:01:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:01:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:01:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:01:27 Aux= 01:01:27 Message to Camera, serial 48043 queued 01:02:04 Received message from Master: op=PointingHead serial=48056 01:02:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:02:04 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:02:04 Point started: ret=0 01:02:04 point_skyscan result=0 01:02:05 Check angles 01:02:05 SkyScan query 01:02:06 SkyScan query done: ret=0 az=40.995<-2733 ze=21.825<-10545 Statuses=0008 0009 01:02:06 Msec=0 True Az=40.995 Ze=21.825 Az status=0008 Ze status=0009 01:02:06 Check angles 01:02:06 SkyScan query 01:02:06 SkyScan query done: ret=0 az=40.98<-2732 ze=0.87<-11942 Statuses=0008 0009 01:02:06 Msec=750 True Az=40.98 Ze=0.87 Az status=0008 Ze status=0009 01:02:07 Check angles 01:02:07 SkyScan query 01:02:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.085<-13339 Statuses=0008 0009 01:02:07 Msec=1500 True Az=40.995 Ze=-20.085 Az status=0008 Ze status=0009 01:02:07 Check angles 01:02:07 SkyScan query 01:02:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0009 01:02:08 Msec=2250 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0009 01:02:08 Check angles 01:02:08 SkyScan query 01:02:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 01:02:09 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 01:02:09 Message to Master queued w/err=0: serial=48056 error=0 01:02:14 Received message from Master: op=Filter serial=48057 01:02:14 Color wheel filter change from 0 to 0 01:02:14 FLIGetFilterPos err=0 currentPosition=0 01:02:14 FLIGetStepsRemaining err=0 RemainingSteps=0 01:02:14 Filter is already there-color wheel unchanged 01:02:14 Received message from Master: op=Shutter serial=48058 01:02:14 Shutter LASER close 01:02:14 Received message from Camera: op=State serial=48060 01:02:14 GetSingleValue result=40 Value=cccccccc 01:02:14 SkyScan query 01:02:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:02:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:02:15 Parameters OK 01:02:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:02:15 Set A/D data flow result=40 01:02:15 Set A/D channel type result=40 01:02:15 Set A/D encoding result=40 01:02:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:02:15 Set channel filter=0.000000e+000 result=40 01:02:15 Config A/D Result=40 01:02:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:02:15 Get A/D filter: -9.255963e+061 result=40 01:02:15 Get A/D value=-858993460 result=40 01:02:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:02:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:02:15 Parameters OK 01:02:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:02:15 Set A/D data flow result=40 01:02:15 Set A/D channel type result=40 01:02:15 Set A/D encoding result=40 01:02:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:02:15 Set channel filter=0.000000e+000 result=40 01:02:15 Config A/D Result=40 01:02:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:02:15 Get A/D filter: -9.255963e+061 result=40 01:02:15 Get A/D value=-858993460 result=40 01:02:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:02:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:02:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:02:15 Aux= 01:02:15 Message to Camera, serial 48060 queued 01:02:51 Received message from Master: op=PointingHead serial=48073 01:02:51 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:02:51 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:02:52 Point started: ret=0 01:02:52 point_skyscan result=0 01:02:52 Check angles 01:02:52 SkyScan query 01:02:53 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.4<-16560 Statuses=0009 0009 01:02:53 Msec=0 True Az=63.945 Ze=-68.4 Az status=0009 Ze status=0009 01:02:53 Check angles 01:02:53 SkyScan query 01:02:54 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.4<-17960 Statuses=0009 0009 01:02:54 Msec=750 True Az=81.585 Ze=-89.4 Az status=0009 Ze status=0009 01:02:54 Check angles 01:02:54 SkyScan query 01:02:55 SkyScan query done: ret=0 az=99.075<-6605 ze=-110.34<-19356 Statuses=0009 0009 01:02:55 Msec=1500 True Az=99.075 Ze=-110.34 Az status=0009 Ze status=0009 01:02:55 Check angles 01:02:55 SkyScan query 01:02:55 SkyScan query done: ret=0 az=116.55<-7770 ze=-131.295<-20753 Statuses=0009 0009 01:02:55 Msec=2250 True Az=116.55 Ze=-131.295 Az status=0009 Ze status=0009 01:02:55 Check angles 01:02:55 SkyScan query 01:02:56 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 01:02:56 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 01:02:56 Check angles 01:02:56 SkyScan query 01:02:57 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:02:57 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:02:57 Message to Master queued w/err=0: serial=48073 error=0 01:03:02 Received message from Master: op=Filter serial=48074 01:03:02 Color wheel filter change from 0 to 0 01:03:02 FLIGetFilterPos err=0 currentPosition=0 01:03:02 FLIGetStepsRemaining err=0 RemainingSteps=0 01:03:02 Filter is already there-color wheel unchanged 01:03:02 Received message from Master: op=Shutter serial=48075 01:03:02 Shutter LASER close 01:03:02 Received message from Camera: op=State serial=48077 01:03:02 GetSingleValue result=40 Value=cccccccc 01:03:02 SkyScan query 01:03:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:03:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:03:03 Parameters OK 01:03:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:03:03 Set A/D data flow result=40 01:03:03 Set A/D channel type result=40 01:03:03 Set A/D encoding result=40 01:03:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:03:03 Set channel filter=0.000000e+000 result=40 01:03:03 Config A/D Result=40 01:03:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:03:03 Get A/D filter: -9.255963e+061 result=40 01:03:03 Get A/D value=-858993460 result=40 01:03:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:03:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:03:03 Parameters OK 01:03:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:03:03 Set A/D data flow result=40 01:03:03 Set A/D channel type result=40 01:03:03 Set A/D encoding result=40 01:03:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:03:03 Set channel filter=0.000000e+000 result=40 01:03:03 Config A/D Result=40 01:03:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:03:03 Get A/D filter: -9.255963e+061 result=40 01:03:03 Get A/D value=-858993460 result=40 01:03:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:03:03 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:03:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:03:03 Aux= 01:03:03 Message to Camera, serial 48077 queued 01:03:39 Received message from Master: op=PointingHead serial=48090 01:03:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:03:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:03:40 Point started: ret=0 01:03:40 point_skyscan result=0 01:03:41 Check angles 01:03:41 SkyScan query 01:03:41 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.18<-23412 Statuses=0009 0009 01:03:41 Msec=0 True Az=113.01 Ze=-171.18 Az status=0009 Ze status=0009 01:03:41 Check angles 01:03:41 SkyScan query 01:03:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:03:42 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:03:42 Message to Master queued w/err=0: serial=48090 error=0 01:03:47 Received message from Master: op=Filter serial=48091 01:03:47 Color wheel filter change from 0 to 0 01:03:47 FLIGetFilterPos err=0 currentPosition=0 01:03:47 FLIGetStepsRemaining err=0 RemainingSteps=0 01:03:47 Filter is already there-color wheel unchanged 01:03:47 Received message from Master: op=Shutter serial=48092 01:03:47 Shutter LASER open 01:03:47 Received message from Camera: op=State serial=48094 01:03:47 GetSingleValue result=40 Value=cccccccc 01:03:47 SkyScan query 01:03:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:03:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:03:48 Parameters OK 01:03:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:03:48 Set A/D data flow result=40 01:03:48 Set A/D channel type result=40 01:03:48 Set A/D encoding result=40 01:03:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:03:48 Set channel filter=0.000000e+000 result=40 01:03:48 Config A/D Result=40 01:03:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:03:48 Get A/D filter: -9.255963e+061 result=40 01:03:48 Get A/D value=-858993460 result=40 01:03:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:03:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:03:48 Parameters OK 01:03:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:03:48 Set A/D data flow result=40 01:03:48 Set A/D channel type result=40 01:03:48 Set A/D encoding result=40 01:03:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:03:48 Set channel filter=0.000000e+000 result=40 01:03:48 Config A/D Result=40 01:03:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:03:48 Get A/D filter: -9.255963e+061 result=40 01:03:48 Get A/D value=-858993460 result=40 01:03:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:03:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:03:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:03:48 Aux= 01:03:48 Message to Camera, serial 48094 queued 01:03:56 Received message from Master: op=Shutter serial=48104 01:03:56 Shutter LASER close 01:03:57 Received message from Master: op=PointingHead serial=48108 01:03:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:03:57 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:03:57 Point started: ret=0 01:03:57 point_skyscan result=0 01:03:58 Check angles 01:03:58 SkyScan query 01:03:59 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.085<-21539 Statuses=0009 0009 01:03:59 Msec=0 True Az=136.02 Ze=-143.085 Az status=0009 Ze status=0009 01:03:59 Check angles 01:03:59 SkyScan query 01:03:59 SkyScan query done: ret=0 az=153.6<-10240 ze=-122.085<-20139 Statuses=0009 0009 01:03:59 Msec=750 True Az=153.6 Ze=-122.085 Az status=0009 Ze status=0009 01:03:59 Check angles 01:03:59 SkyScan query 01:04:00 SkyScan query done: ret=0 az=171.015<-11401 ze=-101.205<-18747 Statuses=0009 0009 01:04:00 Msec=1500 True Az=171.015 Ze=-101.205 Az status=0009 Ze status=0009 01:04:00 Check angles 01:04:00 SkyScan query 01:04:01 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.235<-17349 Statuses=0008 0009 01:04:01 Msec=2250 True Az=176.025 Ze=-80.235 Az status=0008 Ze status=0009 01:04:01 Check angles 01:04:01 SkyScan query 01:04:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.265<-15951 Statuses=0008 0009 01:04:02 Msec=3000 True Az=175.995 Ze=-59.265 Az status=0008 Ze status=0009 01:04:02 Check angles 01:04:02 SkyScan query 01:04:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:04:02 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:04:02 Message to Master queued w/err=0: serial=48108 error=0 01:04:07 Received message from Master: op=Filter serial=48109 01:04:07 Color wheel filter change from 0 to 0 01:04:07 FLIGetFilterPos err=0 currentPosition=0 01:04:07 FLIGetStepsRemaining err=0 RemainingSteps=0 01:04:07 Filter is already there-color wheel unchanged 01:04:07 Received message from Master: op=Shutter serial=48110 01:04:07 Shutter LASER close 01:04:08 Received message from Camera: op=State serial=48112 01:04:08 GetSingleValue result=40 Value=cccccccc 01:04:08 SkyScan query 01:04:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:04:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:04:08 Parameters OK 01:04:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:04:08 Set A/D data flow result=40 01:04:08 Set A/D channel type result=40 01:04:08 Set A/D encoding result=40 01:04:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:04:08 Set channel filter=0.000000e+000 result=40 01:04:08 Config A/D Result=40 01:04:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:04:08 Get A/D filter: -9.255963e+061 result=40 01:04:08 Get A/D value=-858993460 result=40 01:04:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:04:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:04:08 Parameters OK 01:04:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:04:08 Set A/D data flow result=40 01:04:08 Set A/D channel type result=40 01:04:08 Set A/D encoding result=40 01:04:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:04:08 Set channel filter=0.000000e+000 result=40 01:04:08 Config A/D Result=40 01:04:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:04:08 Get A/D filter: -9.255963e+061 result=40 01:04:08 Get A/D value=-858993460 result=40 01:04:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:04:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:04:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:04:08 Aux= 01:04:08 Message to Camera, serial 48112 queued 01:04:45 Received message from Master: op=PointingHead serial=48125 01:04:45 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:04:45 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:04:45 Point started: ret=0 01:04:45 point_skyscan result=0 01:04:46 Check angles 01:04:46 SkyScan query 01:04:47 SkyScan query done: ret=0 az=153.015<-10201 ze=-21.81<-13454 Statuses=0009 0009 01:04:47 Msec=0 True Az=153.015 Ze=-21.81 Az status=0009 Ze status=0009 01:04:47 Check angles 01:04:47 SkyScan query 01:04:47 SkyScan query done: ret=0 az=135.225<-9015 ze=-0.36<-12024 Statuses=0009 0009 01:04:47 Msec=750 True Az=135.225 Ze=-0.36 Az status=0009 Ze status=0009 01:04:48 Check angles 01:04:48 SkyScan query 01:04:48 SkyScan query done: ret=0 az=117.555<-7837 ze=20.595<-10627 Statuses=0009 0009 01:04:48 Msec=1500 True Az=117.555 Ze=20.595 Az status=0009 Ze status=0009 01:04:48 Check angles 01:04:48 SkyScan query 01:04:49 SkyScan query done: ret=0 az=99.885<-6659 ze=41.97<-9202 Statuses=0009 0009 01:04:49 Msec=2250 True Az=99.885 Ze=41.97 Az status=0009 Ze status=0009 01:04:49 Check angles 01:04:49 SkyScan query 01:04:50 SkyScan query done: ret=0 az=86.04<-5736 ze=51.57<-8562 Statuses=0009 0008 01:04:50 Msec=3000 True Az=86.04 Ze=51.57 Az status=0009 Ze status=0008 01:04:50 Check angles 01:04:50 SkyScan query 01:04:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:04:51 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 01:04:51 Message to Master queued w/err=0: serial=48125 error=0 01:04:56 Received message from Master: op=Filter serial=48126 01:04:56 Color wheel filter change from 0 to 0 01:04:56 FLIGetFilterPos err=0 currentPosition=0 01:04:56 FLIGetStepsRemaining err=0 RemainingSteps=0 01:04:56 Filter is already there-color wheel unchanged 01:04:56 Received message from Master: op=Shutter serial=48127 01:04:56 Shutter LASER close 01:04:56 Received message from Camera: op=State serial=48129 01:04:56 GetSingleValue result=40 Value=cccccccc 01:04:56 SkyScan query 01:04:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:04:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:04:56 Parameters OK 01:04:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:04:56 Set A/D data flow result=40 01:04:56 Set A/D channel type result=40 01:04:56 Set A/D encoding result=40 01:04:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:04:56 Set channel filter=0.000000e+000 result=40 01:04:56 Config A/D Result=40 01:04:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:04:56 Get A/D filter: -9.255963e+061 result=40 01:04:56 Get A/D value=-858993460 result=40 01:04:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:04:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:04:56 Parameters OK 01:04:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:04:56 Set A/D data flow result=40 01:04:56 Set A/D channel type result=40 01:04:56 Set A/D encoding result=40 01:04:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:04:56 Set channel filter=0.000000e+000 result=40 01:04:56 Config A/D Result=40 01:04:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:04:56 Get A/D filter: -9.255963e+061 result=40 01:04:56 Get A/D value=-858993460 result=40 01:04:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:04:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:04:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:04:56 Aux= 01:04:56 Message to Camera, serial 48129 queued 01:05:33 Received message from Master: op=PointingHead serial=48142 01:05:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:05:33 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:05:33 Point started: ret=0 01:05:33 point_skyscan result=0 01:05:34 Check angles 01:05:34 SkyScan query 01:05:35 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 01:05:35 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 01:05:35 Check angles 01:05:35 SkyScan query 01:05:36 SkyScan query done: ret=0 az=126.795<-8453 ze=38.505<-9433 Statuses=0009 0008 01:05:36 Msec=750 True Az=126.795 Ze=38.505 Az status=0009 Ze status=0008 01:05:36 Check angles 01:05:36 SkyScan query 01:05:36 SkyScan query done: ret=0 az=144.27<-9618 ze=38.505<-9433 Statuses=0009 0008 01:05:36 Msec=1500 True Az=144.27 Ze=38.505 Az status=0009 Ze status=0008 01:05:37 Check angles 01:05:37 SkyScan query 01:05:37 SkyScan query done: ret=0 az=161.58<-10772 ze=38.505<-9433 Statuses=0009 0008 01:05:37 Msec=2250 True Az=161.58 Ze=38.505 Az status=0009 Ze status=0008 01:05:37 Check angles 01:05:37 SkyScan query 01:05:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 01:05:38 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 01:05:38 Check angles 01:05:38 SkyScan query 01:05:39 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:05:39 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:05:39 Message to Master queued w/err=0: serial=48142 error=0 01:05:44 Received message from Master: op=Filter serial=48143 01:05:44 Color wheel filter change from 0 to 0 01:05:44 FLIGetFilterPos err=0 currentPosition=0 01:05:44 FLIGetStepsRemaining err=0 RemainingSteps=0 01:05:44 Filter is already there-color wheel unchanged 01:05:44 Received message from Master: op=Shutter serial=48144 01:05:44 Shutter LASER close 01:05:44 Received message from Camera: op=State serial=48146 01:05:44 GetSingleValue result=40 Value=cccccccc 01:05:44 SkyScan query 01:05:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:05:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:05:44 Parameters OK 01:05:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:05:44 Set A/D data flow result=40 01:05:44 Set A/D channel type result=40 01:05:44 Set A/D encoding result=40 01:05:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:05:44 Set channel filter=0.000000e+000 result=40 01:05:44 Config A/D Result=40 01:05:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:05:44 Get A/D filter: -9.255963e+061 result=40 01:05:44 Get A/D value=-858993460 result=40 01:05:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:05:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:05:44 Parameters OK [UTC 2018-12-11 01:05:44] 01:05:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:05:44 Set A/D data flow result=40 01:05:44 Set A/D channel type result=40 01:05:44 Set A/D encoding result=40 01:05:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:05:44 Set channel filter=0.000000e+000 result=40 01:05:44 Config A/D Result=40 01:05:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:05:44 Get A/D filter: -9.255963e+061 result=40 01:05:44 Get A/D value=-858993460 result=40 01:05:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:05:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:05:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:05:44 Aux= 01:05:44 Message to Camera, serial 48146 queued 01:06:21 Received message from Master: op=PointingHead serial=48159 01:06:21 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:06:21 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:06:22 Point started: ret=0 01:06:22 point_skyscan result=0 01:06:22 Check angles 01:06:22 SkyScan query 01:06:23 SkyScan query done: ret=0 az=152.775<-10185 ze=8.31<-11446 Statuses=0009 0009 01:06:23 Msec=0 True Az=152.775 Ze=8.31 Az status=0009 Ze status=0009 01:06:23 Check angles 01:06:23 SkyScan query 01:06:24 SkyScan query done: ret=0 az=135.285<-9019 ze=-12.57<-12838 Statuses=0009 0009 01:06:24 Msec=750 True Az=135.285 Ze=-12.57 Az status=0009 Ze status=0009 01:06:24 Check angles 01:06:24 SkyScan query 01:06:24 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.51<-14234 Statuses=0009 0009 01:06:24 Msec=1500 True Az=117.765 Ze=-33.51 Az status=0009 Ze status=0009 01:06:25 Check angles 01:06:25 SkyScan query 01:06:25 SkyScan query done: ret=0 az=100.17<-6678 ze=-51.555<-15437 Statuses=0009 0009 01:06:25 Msec=2250 True Az=100.17 Ze=-51.555 Az status=0009 Ze status=0009 01:06:25 Check angles 01:06:25 SkyScan query 01:06:26 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 01:06:26 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 01:06:26 Check angles 01:06:26 SkyScan query 01:06:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:06:27 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:06:27 Message to Master queued w/err=0: serial=48159 error=0 01:06:32 Received message from Master: op=Filter serial=48160 01:06:32 Color wheel filter change from 0 to 0 01:06:32 FLIGetFilterPos err=0 currentPosition=0 01:06:32 FLIGetStepsRemaining err=0 RemainingSteps=0 01:06:32 Filter is already there-color wheel unchanged 01:06:32 Received message from Master: op=Shutter serial=48161 01:06:32 Shutter LASER close 01:06:32 Received message from Camera: op=State serial=48163 01:06:32 GetSingleValue result=40 Value=cccccccc 01:06:32 SkyScan query 01:06:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:06:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:06:32 Parameters OK 01:06:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:06:32 Set A/D data flow result=40 01:06:32 Set A/D channel type result=40 01:06:32 Set A/D encoding result=40 01:06:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:06:32 Set channel filter=0.000000e+000 result=40 01:06:32 Config A/D Result=40 01:06:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:06:32 Get A/D filter: -9.255963e+061 result=40 01:06:32 Get A/D value=-858993460 result=40 01:06:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:06:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:06:32 Parameters OK 01:06:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:06:32 Set A/D data flow result=40 01:06:32 Set A/D channel type result=40 01:06:32 Set A/D encoding result=40 01:06:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:06:32 Set channel filter=0.000000e+000 result=40 01:06:32 Config A/D Result=40 01:06:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:06:32 Get A/D filter: -9.255963e+061 result=40 01:06:32 Get A/D value=-858993460 result=40 01:06:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:06:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:06:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:06:32 Aux= 01:06:32 Message to Camera, serial 48163 queued 01:07:08 Received message from Master: op=PointingHead serial=48175 01:07:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:07:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:07:09 Point started: ret=0 01:07:09 point_skyscan result=0 01:07:09 Check angles 01:07:09 SkyScan query 01:07:10 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.69<-17446 Statuses=0009 0009 01:07:10 Msec=0 True Az=109.38 Ze=-81.69 Az status=0009 Ze status=0009 01:07:10 Check angles 01:07:10 SkyScan query 01:07:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.66<-18844 Statuses=0008 0009 01:07:11 Msec=750 True Az=112.995 Ze=-102.66 Az status=0008 Ze status=0009 01:07:11 Check angles 01:07:11 SkyScan query 01:07:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.08<-20272 Statuses=0008 0009 01:07:11 Msec=1500 True Az=112.995 Ze=-124.08 Az status=0008 Ze status=0009 01:07:12 Check angles 01:07:12 SkyScan query 01:07:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.41<-21694 Statuses=0008 0009 01:07:12 Msec=2250 True Az=112.995 Ze=-145.41 Az status=0008 Ze status=0009 01:07:12 Check angles 01:07:12 SkyScan query 01:07:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.83<-23122 Statuses=0008 0009 01:07:13 Msec=3000 True Az=112.995 Ze=-166.83 Az status=0008 Ze status=0009 01:07:13 Check angles 01:07:13 SkyScan query 01:07:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:07:14 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:07:14 Message to Master queued w/err=0: serial=48175 error=0 01:07:19 Received message from Master: op=Filter serial=48176 01:07:19 Color wheel filter change from 0 to 0 01:07:19 FLIGetFilterPos err=0 currentPosition=0 01:07:19 FLIGetStepsRemaining err=0 RemainingSteps=0 01:07:19 Filter is already there-color wheel unchanged 01:07:19 Received message from Master: op=Shutter serial=48177 01:07:19 Shutter LASER open 01:07:19 Received message from Camera: op=State serial=48179 01:07:19 GetSingleValue result=40 Value=cccccccc 01:07:19 SkyScan query 01:07:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:07:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:07:20 Parameters OK 01:07:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:07:20 Set A/D data flow result=40 01:07:20 Set A/D channel type result=40 01:07:20 Set A/D encoding result=40 01:07:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:07:20 Set channel filter=0.000000e+000 result=40 01:07:20 Config A/D Result=40 01:07:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:07:20 Get A/D filter: -9.255963e+061 result=40 01:07:20 Get A/D value=-858993460 result=40 01:07:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:07:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:07:20 Parameters OK 01:07:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:07:20 Set A/D data flow result=40 01:07:20 Set A/D channel type result=40 01:07:20 Set A/D encoding result=40 01:07:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:07:20 Set channel filter=0.000000e+000 result=40 01:07:20 Config A/D Result=40 01:07:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:07:20 Get A/D filter: -9.255963e+061 result=40 01:07:20 Get A/D value=-858993460 result=40 01:07:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:07:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:07:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:07:20 Aux= 01:07:20 Message to Camera, serial 48179 queued 01:07:28 Received message from Master: op=Shutter serial=48189 01:07:28 Shutter LASER close 01:07:29 Received message from Master: op=PointingHead serial=48193 01:07:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:07:29 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:07:29 Point started: ret=0 01:07:29 point_skyscan result=0 01:07:30 Check angles 01:07:30 SkyScan query 01:07:30 SkyScan query done: ret=0 az=90.18<-6012 ze=157.56<-1496 Statuses=0009 0009 01:07:30 Msec=0 True Az=90.18 Ze=157.56 Az status=0009 Ze status=0009 01:07:30 Check angles 01:07:30 SkyScan query 01:07:31 SkyScan query done: ret=0 az=72.75<-4850 ze=136.575<-2895 Statuses=0009 0009 01:07:31 Msec=750 True Az=72.75 Ze=136.575 Az status=0009 Ze status=0009 01:07:31 Check angles 01:07:31 SkyScan query 01:07:32 SkyScan query done: ret=0 az=54.975<-3665 ze=115.23<-4318 Statuses=0009 0009 01:07:32 Msec=1500 True Az=54.975 Ze=115.23 Az status=0009 Ze status=0009 01:07:32 Check angles 01:07:32 SkyScan query 01:07:32 SkyScan query done: ret=0 az=40.875<-2725 ze=94.215<-5719 Statuses=0009 0009 01:07:32 Msec=2250 True Az=40.875 Ze=94.215 Az status=0009 Ze status=0009 01:07:33 Check angles 01:07:33 SkyScan query 01:07:33 SkyScan query done: ret=0 az=40.995<-2733 ze=72.81<-7146 Statuses=0008 0009 01:07:33 Msec=3000 True Az=40.995 Ze=72.81 Az status=0008 Ze status=0009 01:07:33 Check angles 01:07:33 SkyScan query 01:07:34 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 01:07:34 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 01:07:34 Check angles 01:07:34 SkyScan query 01:07:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:07:35 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:07:35 Message to Master queued w/err=0: serial=48193 error=0 01:07:40 Received message from Master: op=Filter serial=48194 01:07:40 Color wheel filter change from 0 to 0 01:07:40 FLIGetFilterPos err=0 currentPosition=0 01:07:40 FLIGetStepsRemaining err=0 RemainingSteps=0 01:07:40 Filter is already there-color wheel unchanged 01:07:40 Received message from Master: op=Shutter serial=48195 01:07:40 Shutter LASER close 01:07:40 Received message from Camera: op=State serial=48197 01:07:40 GetSingleValue result=40 Value=cccccccc 01:07:40 SkyScan query 01:07:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:07:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:07:41 Parameters OK 01:07:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:07:41 Set A/D data flow result=40 01:07:41 Set A/D channel type result=40 01:07:41 Set A/D encoding result=40 01:07:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:07:41 Set channel filter=0.000000e+000 result=40 01:07:41 Config A/D Result=40 01:07:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:07:41 Get A/D filter: -9.255963e+061 result=40 01:07:41 Get A/D value=-858993460 result=40 01:07:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:07:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:07:41 Parameters OK 01:07:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:07:41 Set A/D data flow result=40 01:07:41 Set A/D channel type result=40 01:07:41 Set A/D encoding result=40 01:07:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:07:41 Set channel filter=0.000000e+000 result=40 01:07:41 Config A/D Result=40 01:07:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:07:41 Get A/D filter: -9.255963e+061 result=40 01:07:41 Get A/D value=-858993460 result=40 01:07:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:07:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:07:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:07:41 Aux= 01:07:41 Message to Camera, serial 48197 queued 01:08:18 Received message from Master: op=PointingHead serial=48210 01:08:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:08:18 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:08:18 Point started: ret=0 01:08:18 point_skyscan result=0 01:08:19 Check angles 01:08:19 SkyScan query 01:08:19 SkyScan query done: ret=0 az=40.995<-2733 ze=21.57<-10562 Statuses=0008 0009 01:08:19 Msec=0 True Az=40.995 Ze=21.57 Az status=0008 Ze status=0009 01:08:19 Check angles 01:08:19 SkyScan query 01:08:20 SkyScan query done: ret=0 az=40.995<-2733 ze=0.6<-11960 Statuses=0008 0009 01:08:20 Msec=750 True Az=40.995 Ze=0.6 Az status=0008 Ze status=0009 01:08:20 Check angles 01:08:20 SkyScan query 01:08:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.355<-13357 Statuses=0008 0009 01:08:21 Msec=1500 True Az=40.995 Ze=-20.355 Az status=0008 Ze status=0009 01:08:21 Check angles 01:08:21 SkyScan query 01:08:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0009 01:08:22 Msec=2250 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0009 01:08:22 Check angles 01:08:22 SkyScan query 01:08:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 01:08:22 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 01:08:22 Message to Master queued w/err=0: serial=48210 error=0 01:08:27 Received message from Master: op=Filter serial=48211 01:08:27 Color wheel filter change from 0 to 0 01:08:27 FLIGetFilterPos err=0 currentPosition=0 01:08:27 FLIGetStepsRemaining err=0 RemainingSteps=0 01:08:27 Filter is already there-color wheel unchanged 01:08:27 Received message from Master: op=Shutter serial=48212 01:08:27 Shutter LASER close 01:08:28 Received message from Camera: op=State serial=48214 01:08:28 GetSingleValue result=40 Value=cccccccc 01:08:28 SkyScan query 01:08:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:08:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:08:28 Parameters OK 01:08:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:08:28 Set A/D data flow result=40 01:08:28 Set A/D channel type result=40 01:08:28 Set A/D encoding result=40 01:08:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:08:28 Set channel filter=0.000000e+000 result=40 01:08:28 Config A/D Result=40 01:08:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:08:28 Get A/D filter: -9.255963e+061 result=40 01:08:28 Get A/D value=-858993460 result=40 01:08:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:08:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:08:28 Parameters OK 01:08:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:08:28 Set A/D data flow result=40 01:08:28 Set A/D channel type result=40 01:08:28 Set A/D encoding result=40 01:08:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:08:28 Set channel filter=0.000000e+000 result=40 01:08:28 Config A/D Result=40 01:08:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:08:28 Get A/D filter: -9.255963e+061 result=40 01:08:28 Get A/D value=-858993460 result=40 01:08:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:08:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:08:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:08:28 Aux= 01:08:28 Message to Camera, serial 48214 queued 01:09:04 Received message from Master: op=PointingHead serial=48226 01:09:04 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:09:04 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:09:04 Point started: ret=0 01:09:04 point_skyscan result=0 01:09:05 Check angles 01:09:05 SkyScan query 01:09:06 SkyScan query done: ret=0 az=63.75<-4250 ze=-68.13<-16542 Statuses=0009 0009 01:09:06 Msec=0 True Az=63.75 Ze=-68.13 Az status=0009 Ze status=0009 01:09:06 Check angles 01:09:06 SkyScan query 01:09:06 SkyScan query done: ret=0 az=81.21<-5414 ze=-89.1<-17940 Statuses=0009 0009 01:09:06 Msec=750 True Az=81.21 Ze=-89.1 Az status=0009 Ze status=0009 01:09:07 Check angles 01:09:07 SkyScan query 01:09:07 SkyScan query done: ret=0 az=98.85<-6590 ze=-110.025<-19335 Statuses=0009 0009 01:09:07 Msec=1500 True Az=98.85 Ze=-110.025 Az status=0009 Ze status=0009 01:09:07 Check angles 01:09:07 SkyScan query 01:09:08 SkyScan query done: ret=0 az=116.79<-7786 ze=-131.445<-20763 Statuses=0009 0009 01:09:08 Msec=2250 True Az=116.79 Ze=-131.445 Az status=0009 Ze status=0009 01:09:08 Check angles 01:09:08 SkyScan query 01:09:09 SkyScan query done: ret=0 az=131.16<-8744 ze=-141.54<-21436 Statuses=0009 0008 01:09:09 Msec=3000 True Az=131.16 Ze=-141.54 Az status=0009 Ze status=0008 01:09:09 Check angles 01:09:09 SkyScan query 01:09:09 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:09:09 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:09:09 Message to Master queued w/err=0: serial=48226 error=0 01:09:14 Received message from Master: op=Filter serial=48227 01:09:14 Color wheel filter change from 0 to 0 01:09:14 FLIGetFilterPos err=0 currentPosition=0 01:09:14 FLIGetStepsRemaining err=0 RemainingSteps=0 01:09:14 Filter is already there-color wheel unchanged 01:09:15 Received message from Master: op=Shutter serial=48228 01:09:15 Shutter LASER close 01:09:15 Received message from Camera: op=State serial=48230 01:09:15 GetSingleValue result=40 Value=cccccccc 01:09:15 SkyScan query 01:09:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:09:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:09:15 Parameters OK 01:09:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:09:15 Set A/D data flow result=40 01:09:15 Set A/D channel type result=40 01:09:15 Set A/D encoding result=40 01:09:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:09:15 Set channel filter=0.000000e+000 result=40 01:09:15 Config A/D Result=40 01:09:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:09:15 Get A/D filter: -9.255963e+061 result=40 01:09:15 Get A/D value=-858993460 result=40 01:09:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:09:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:09:15 Parameters OK 01:09:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:09:15 Set A/D data flow result=40 01:09:15 Set A/D channel type result=40 01:09:15 Set A/D encoding result=40 01:09:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:09:15 Set channel filter=0.000000e+000 result=40 01:09:15 Config A/D Result=40 01:09:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:09:15 Get A/D filter: -9.255963e+061 result=40 01:09:15 Get A/D value=-858993460 result=40 01:09:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:09:15 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:09:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:09:15 Aux= 01:09:15 Message to Camera, serial 48230 queued 01:09:52 Received message from Master: op=PointingHead serial=48243 01:09:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:09:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:09:52 Point started: ret=0 01:09:52 point_skyscan result=0 01:09:53 Check angles 01:09:53 SkyScan query 01:09:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.075<-23405 Statuses=0009 0009 01:09:54 Msec=0 True Az=113.01 Ze=-171.075 Az status=0009 Ze status=0009 01:09:54 Check angles 01:09:54 SkyScan query 01:09:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:09:54 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:09:54 Message to Master queued w/err=0: serial=48243 error=0 01:09:59 Received message from Master: op=Filter serial=48244 01:09:59 Color wheel filter change from 0 to 0 01:09:59 FLIGetFilterPos err=0 currentPosition=0 01:09:59 FLIGetStepsRemaining err=0 RemainingSteps=0 01:09:59 Filter is already there-color wheel unchanged 01:10:00 Received message from Master: op=Shutter serial=48245 01:10:00 Shutter LASER open 01:10:00 Received message from Camera: op=State serial=48247 01:10:00 GetSingleValue result=40 Value=cccccccc 01:10:00 SkyScan query 01:10:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:10:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:10:00 Parameters OK 01:10:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:10:00 Set A/D data flow result=40 01:10:00 Set A/D channel type result=40 01:10:00 Set A/D encoding result=40 01:10:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:10:00 Set channel filter=0.000000e+000 result=40 01:10:00 Config A/D Result=40 01:10:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:10:00 Get A/D filter: -9.255963e+061 result=40 01:10:00 Get A/D value=-858993460 result=40 01:10:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:10:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:10:00 Parameters OK 01:10:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:10:00 Set A/D data flow result=40 01:10:00 Set A/D channel type result=40 01:10:00 Set A/D encoding result=40 01:10:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:10:00 Set channel filter=0.000000e+000 result=40 01:10:00 Config A/D Result=40 01:10:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:10:00 Get A/D filter: -9.255963e+061 result=40 01:10:00 Get A/D value=-858993460 result=40 01:10:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:10:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:10:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:10:00 Aux= 01:10:00 Message to Camera, serial 48247 queued 01:10:09 Received message from Master: op=Shutter serial=48257 01:10:09 Shutter LASER close 01:10:09 Received message from Master: op=PointingHead serial=48261 01:10:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:10:09 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:10:10 Point started: ret=0 01:10:10 point_skyscan result=0 01:10:10 Check angles 01:10:10 SkyScan query 01:10:11 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.07<-21538 Statuses=0009 0009 01:10:11 Msec=0 True Az=136.17 Ze=-143.07 Az status=0009 Ze status=0009 01:10:11 Check angles 01:10:11 SkyScan query 01:10:12 SkyScan query done: ret=0 az=154.02<-10268 ze=-121.695<-20113 Statuses=0009 0009 01:10:12 Msec=750 True Az=154.02 Ze=-121.695 Az status=0009 Ze status=0009 01:10:12 Check angles 01:10:12 SkyScan query 01:10:13 SkyScan query done: ret=0 az=171.495<-11433 ze=-100.695<-18713 Statuses=0009 0009 01:10:13 Msec=1500 True Az=171.495 Ze=-100.695 Az status=0009 Ze status=0009 01:10:13 Check angles 01:10:13 SkyScan query 01:10:13 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.335<-17289 Statuses=0008 0009 01:10:13 Msec=2250 True Az=176.025 Ze=-79.335 Az status=0008 Ze status=0009 01:10:14 Check angles 01:10:14 SkyScan query 01:10:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-57.945<-15863 Statuses=0008 0009 01:10:14 Msec=3000 True Az=176.01 Ze=-57.945 Az status=0008 Ze status=0009 01:10:14 Check angles 01:10:14 SkyScan query 01:10:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 01:10:15 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 01:10:15 Message to Master queued w/err=0: serial=48261 error=0 01:10:20 Received message from Master: op=Filter serial=48262 01:10:20 Color wheel filter change from 0 to 0 01:10:20 FLIGetFilterPos err=0 currentPosition=0 01:10:20 FLIGetStepsRemaining err=0 RemainingSteps=0 01:10:20 Filter is already there-color wheel unchanged 01:10:20 Received message from Master: op=Shutter serial=48263 01:10:20 Shutter LASER close 01:10:20 Received message from Camera: op=State serial=48265 01:10:20 GetSingleValue result=40 Value=cccccccc 01:10:20 SkyScan query 01:10:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:10:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:10:21 Parameters OK 01:10:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:10:21 Set A/D data flow result=40 01:10:21 Set A/D channel type result=40 01:10:21 Set A/D encoding result=40 01:10:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:10:21 Set channel filter=0.000000e+000 result=40 01:10:21 Config A/D Result=40 01:10:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:10:21 Get A/D filter: -9.255963e+061 result=40 01:10:21 Get A/D value=-858993460 result=40 01:10:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:10:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:10:21 Parameters OK 01:10:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:10:21 Set A/D data flow result=40 01:10:21 Set A/D channel type result=40 01:10:21 Set A/D encoding result=40 01:10:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:10:21 Set channel filter=0.000000e+000 result=40 01:10:21 Config A/D Result=40 01:10:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:10:21 Get A/D filter: -9.255963e+061 result=40 01:10:21 Get A/D value=-858993460 result=40 01:10:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:10:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:10:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:10:21 Aux= 01:10:21 Message to Camera, serial 48265 queued 01:10:58 Received message from Master: op=PointingHead serial=48278 01:10:58 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:10:58 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:10:58 Point started: ret=0 01:10:58 point_skyscan result=0 01:10:59 Check angles 01:10:59 SkyScan query 01:10:59 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.945<-13463 Statuses=0009 0009 01:10:59 Msec=0 True Az=153.18 Ze=-21.945 Az status=0009 Ze status=0009 01:10:59 Check angles 01:10:59 SkyScan query 01:11:00 SkyScan query done: ret=0 az=135.795<-9053 ze=-0.975<-12065 Statuses=0009 0009 01:11:00 Msec=750 True Az=135.795 Ze=-0.975 Az status=0009 Ze status=0009 01:11:00 Check angles 01:11:00 SkyScan query 01:11:01 SkyScan query done: ret=0 az=118.155<-7877 ze=19.935<-10671 Statuses=0009 0009 01:11:01 Msec=1500 True Az=118.155 Ze=19.935 Az status=0009 Ze status=0009 01:11:01 Check angles 01:11:01 SkyScan query 01:11:02 SkyScan query done: ret=0 az=100.65<-6710 ze=40.95<-9270 Statuses=0009 0009 01:11:02 Msec=2250 True Az=100.65 Ze=40.95 Az status=0009 Ze status=0009 01:11:02 Check angles 01:11:02 SkyScan query 01:11:02 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 01:11:02 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 01:11:02 Check angles 01:11:02 SkyScan query 01:11:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:11:03 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:11:03 Message to Master queued w/err=0: serial=48278 error=0 01:11:08 Received message from Master: op=Filter serial=48279 01:11:08 Color wheel filter change from 0 to 0 01:11:08 FLIGetFilterPos err=0 currentPosition=0 01:11:08 FLIGetStepsRemaining err=0 RemainingSteps=0 01:11:08 Filter is already there-color wheel unchanged 01:11:08 Received message from Master: op=Shutter serial=48280 01:11:08 Shutter LASER close 01:11:08 Received message from Camera: op=State serial=48282 01:11:08 GetSingleValue result=40 Value=cccccccc 01:11:08 SkyScan query 01:11:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:11:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:11:09 Parameters OK 01:11:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:11:09 Set A/D data flow result=40 01:11:09 Set A/D channel type result=40 01:11:09 Set A/D encoding result=40 01:11:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:11:09 Set channel filter=0.000000e+000 result=40 01:11:09 Config A/D Result=40 01:11:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:11:09 Get A/D filter: -9.255963e+061 result=40 01:11:09 Get A/D value=-858993460 result=40 01:11:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:11:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:11:09 Parameters OK 01:11:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:11:09 Set A/D data flow result=40 01:11:09 Set A/D channel type result=40 01:11:09 Set A/D encoding result=40 01:11:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:11:09 Set channel filter=0.000000e+000 result=40 01:11:09 Config A/D Result=40 01:11:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:11:09 Get A/D filter: -9.255963e+061 result=40 01:11:09 Get A/D value=-858993460 result=40 01:11:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:11:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:11:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:11:09 Aux= 01:11:09 Message to Camera, serial 48282 queued 01:11:46 Received message from Master: op=PointingHead serial=48295 01:11:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:11:46 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:11:46 Point started: ret=0 01:11:46 point_skyscan result=0 01:11:47 Check angles 01:11:47 SkyScan query 01:11:47 SkyScan query done: ret=0 az=109.395<-7293 ze=38.49<-9434 Statuses=0009 0008 01:11:47 Msec=0 True Az=109.395 Ze=38.49 Az status=0009 Ze status=0008 01:11:48 Check angles 01:11:48 SkyScan query 01:11:48 SkyScan query done: ret=0 az=127.02<-8468 ze=38.505<-9433 Statuses=0009 0008 01:11:48 Msec=750 True Az=127.02 Ze=38.505 Az status=0009 Ze status=0008 01:11:48 Check angles 01:11:48 SkyScan query 01:11:49 SkyScan query done: ret=0 az=144.435<-9629 ze=38.505<-9433 Statuses=0009 0008 01:11:49 Msec=1500 True Az=144.435 Ze=38.505 Az status=0009 Ze status=0008 01:11:49 Check angles 01:11:49 SkyScan query 01:11:50 SkyScan query done: ret=0 az=161.76<-10784 ze=38.505<-9433 Statuses=0009 0008 01:11:50 Msec=2250 True Az=161.76 Ze=38.505 Az status=0009 Ze status=0008 01:11:50 Check angles 01:11:50 SkyScan query 01:11:50 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:11:50 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:11:51 Check angles 01:11:51 SkyScan query 01:11:51 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:11:51 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:11:51 Message to Master queued w/err=0: serial=48295 error=0 01:11:56 Received message from Master: op=Filter serial=48296 01:11:56 Color wheel filter change from 0 to 0 01:11:56 FLIGetFilterPos err=0 currentPosition=0 01:11:56 FLIGetStepsRemaining err=0 RemainingSteps=0 01:11:56 Filter is already there-color wheel unchanged 01:11:56 Received message from Master: op=Shutter serial=48297 01:11:56 Shutter LASER close 01:11:56 Received message from Camera: op=State serial=48299 01:11:56 GetSingleValue result=40 Value=cccccccc 01:11:56 SkyScan query 01:11:57 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:11:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:11:57 Parameters OK 01:11:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:11:57 Set A/D data flow result=40 01:11:57 Set A/D channel type result=40 01:11:57 Set A/D encoding result=40 01:11:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:11:57 Set channel filter=0.000000e+000 result=40 01:11:57 Config A/D Result=40 01:11:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:11:57 Get A/D filter: -9.255963e+061 result=40 01:11:57 Get A/D value=-858993460 result=40 01:11:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:11:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:11:57 Parameters OK 01:11:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:11:57 Set A/D data flow result=40 01:11:57 Set A/D channel type result=40 01:11:57 Set A/D encoding result=40 01:11:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:11:57 Set channel filter=0.000000e+000 result=40 01:11:57 Config A/D Result=40 01:11:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:11:57 Get A/D filter: -9.255963e+061 result=40 01:11:57 Get A/D value=-858993460 result=40 01:11:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:11:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:11:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:11:57 Aux= 01:11:57 Message to Camera, serial 48299 queued 01:12:34 Received message from Master: op=PointingHead serial=48312 01:12:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:12:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:12:34 Point started: ret=0 01:12:34 point_skyscan result=0 01:12:35 Check angles 01:12:35 SkyScan query 01:12:35 SkyScan query done: ret=0 az=153.24<-10216 ze=8.955<-11403 Statuses=0009 0009 01:12:35 Msec=0 True Az=153.24 Ze=8.955 Az status=0009 Ze status=0009 01:12:36 Check angles 01:12:36 SkyScan query 01:12:36 SkyScan query done: ret=0 az=135.495<-9033 ze=-12.435<-12829 Statuses=0009 0009 01:12:36 Msec=750 True Az=135.495 Ze=-12.435 Az status=0009 Ze status=0009 01:12:36 Check angles 01:12:36 SkyScan query 01:12:37 SkyScan query done: ret=0 az=117.465<-7831 ze=-33.795<-14253 Statuses=0009 0009 01:12:37 Msec=1500 True Az=117.465 Ze=-33.795 Az status=0009 Ze status=0009 01:12:37 Check angles 01:12:37 SkyScan query 01:12:38 SkyScan query done: ret=0 az=100.11<-6674 ze=-51.57<-15438 Statuses=0009 0009 01:12:38 Msec=2250 True Az=100.11 Ze=-51.57 Az status=0009 Ze status=0009 01:12:38 Check angles 01:12:38 SkyScan query 01:12:39 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 01:12:39 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 01:12:39 Check angles 01:12:39 SkyScan query 01:12:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:12:39 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:12:39 Message to Master queued w/err=0: serial=48312 error=0 01:12:44 Received message from Master: op=Filter serial=48313 01:12:44 Color wheel filter change from 0 to 0 01:12:44 FLIGetFilterPos err=0 currentPosition=0 01:12:44 FLIGetStepsRemaining err=0 RemainingSteps=0 01:12:44 Filter is already there-color wheel unchanged 01:12:44 Received message from Master: op=Shutter serial=48314 01:12:44 Shutter LASER close 01:12:44 Received message from Camera: op=State serial=48316 01:12:44 GetSingleValue result=40 Value=cccccccc 01:12:44 SkyScan query 01:12:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:12:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:12:45 Parameters OK 01:12:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:12:45 Set A/D data flow result=40 01:12:45 Set A/D channel type result=40 01:12:45 Set A/D encoding result=40 01:12:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:12:45 Set channel filter=0.000000e+000 result=40 01:12:45 Config A/D Result=40 01:12:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:12:45 Get A/D filter: -9.255963e+061 result=40 01:12:45 Get A/D value=-858993460 result=40 01:12:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:12:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:12:45 Parameters OK 01:12:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:12:45 Set A/D data flow result=40 01:12:45 Set A/D channel type result=40 01:12:45 Set A/D encoding result=40 01:12:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:12:45 Set channel filter=0.000000e+000 result=40 01:12:45 Config A/D Result=40 01:12:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:12:45 Get A/D filter: -9.255963e+061 result=40 01:12:45 Get A/D value=-858993460 result=40 01:12:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:12:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:12:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:12:45 Aux= 01:12:45 Message to Camera, serial 48316 queued 01:13:22 Received message from Master: op=PointingHead serial=48329 01:13:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:13:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:13:22 Point started: ret=0 01:13:22 point_skyscan result=0 01:13:23 Check angles 01:13:23 SkyScan query 01:13:24 SkyScan query done: ret=0 az=109.215<-7281 ze=-81.57<-17438 Statuses=0009 0009 01:13:24 Msec=0 True Az=109.215 Ze=-81.57 Az status=0009 Ze status=0009 01:13:24 Check angles 01:13:24 SkyScan query 01:13:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.99<-18866 Statuses=0008 0009 01:13:24 Msec=750 True Az=112.995 Ze=-102.99 Az status=0008 Ze status=0009 01:13:25 Check angles 01:13:25 SkyScan query 01:13:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.93<-20262 Statuses=0008 0009 01:13:25 Msec=1500 True Az=112.995 Ze=-123.93 Az status=0008 Ze status=0009 01:13:25 Check angles 01:13:25 SkyScan query 01:13:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.005<-21667 Statuses=0008 0009 01:13:26 Msec=2250 True Az=112.995 Ze=-145.005 Az status=0008 Ze status=0009 01:13:26 Check angles 01:13:26 SkyScan query 01:13:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.275<-23085 Statuses=0008 0009 01:13:27 Msec=3000 True Az=112.995 Ze=-166.275 Az status=0008 Ze status=0009 01:13:27 Check angles 01:13:27 SkyScan query 01:13:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:13:27 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:13:27 Message to Master queued w/err=0: serial=48329 error=0 01:13:32 Received message from Master: op=Filter serial=48330 01:13:32 Color wheel filter change from 0 to 0 01:13:32 FLIGetFilterPos err=0 currentPosition=0 01:13:32 FLIGetStepsRemaining err=0 RemainingSteps=0 01:13:32 Filter is already there-color wheel unchanged 01:13:33 Received message from Master: op=Shutter serial=48331 01:13:33 Shutter LASER open 01:13:33 Received message from Camera: op=State serial=48333 01:13:33 GetSingleValue result=40 Value=cccccccc 01:13:33 SkyScan query 01:13:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:13:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:13:33 Parameters OK 01:13:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:13:33 Set A/D data flow result=40 01:13:33 Set A/D channel type result=40 01:13:33 Set A/D encoding result=40 01:13:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:13:33 Set channel filter=0.000000e+000 result=40 01:13:33 Config A/D Result=40 01:13:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:13:33 Get A/D filter: -9.255963e+061 result=40 01:13:33 Get A/D value=-858993460 result=40 01:13:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:13:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:13:33 Parameters OK 01:13:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:13:33 Set A/D data flow result=40 01:13:33 Set A/D channel type result=40 01:13:33 Set A/D encoding result=40 01:13:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:13:33 Set channel filter=0.000000e+000 result=40 01:13:33 Config A/D Result=40 01:13:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:13:33 Get A/D filter: -9.255963e+061 result=40 01:13:33 Get A/D value=-858993460 result=40 01:13:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:13:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:13:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:13:33 Aux= 01:13:33 Message to Camera, serial 48333 queued 01:13:42 Received message from Master: op=Shutter serial=48343 01:13:42 Shutter LASER close 01:13:42 Received message from Master: op=PointingHead serial=48347 01:13:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:13:42 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:13:43 Point started: ret=0 01:13:43 point_skyscan result=0 01:13:43 Check angles 01:13:43 SkyScan query 01:13:44 SkyScan query done: ret=0 az=90.045<-6003 ze=157.38<-1508 Statuses=0009 0009 01:13:44 Msec=0 True Az=90.045 Ze=157.38 Az status=0009 Ze status=0009 01:13:44 Check angles 01:13:44 SkyScan query 01:13:45 SkyScan query done: ret=0 az=72.03<-4802 ze=135.945<-2937 Statuses=0009 0009 01:13:45 Msec=750 True Az=72.03 Ze=135.945 Az status=0009 Ze status=0009 01:13:45 Check angles 01:13:45 SkyScan query 01:13:45 SkyScan query done: ret=0 az=54.855<-3657 ze=115.02<-4332 Statuses=0009 0009 01:13:45 Msec=1500 True Az=54.855 Ze=115.02 Az status=0009 Ze status=0009 01:13:46 Check angles 01:13:46 SkyScan query 01:13:46 SkyScan query done: ret=0 az=40.935<-2729 ze=93.585<-5761 Statuses=0009 0009 01:13:46 Msec=2250 True Az=40.935 Ze=93.585 Az status=0009 Ze status=0009 01:13:46 Check angles 01:13:46 SkyScan query 01:13:47 SkyScan query done: ret=0 az=40.995<-2733 ze=72.63<-7158 Statuses=0008 0009 01:13:47 Msec=3000 True Az=40.995 Ze=72.63 Az status=0008 Ze status=0009 01:13:47 Check angles 01:13:47 SkyScan query 01:13:48 SkyScan query done: ret=0 az=40.995<-2733 ze=52.365<-8509 Statuses=0008 0009 01:13:48 Msec=3750 True Az=40.995 Ze=52.365 Az status=0008 Ze status=0009 01:13:48 Check angles 01:13:48 SkyScan query 01:13:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:13:48 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:13:48 Message to Master queued w/err=0: serial=48347 error=0 01:13:53 Received message from Master: op=Filter serial=48348 01:13:53 Color wheel filter change from 0 to 0 01:13:53 FLIGetFilterPos err=0 currentPosition=0 01:13:53 FLIGetStepsRemaining err=0 RemainingSteps=0 01:13:53 Filter is already there-color wheel unchanged 01:13:54 Received message from Master: op=Shutter serial=48349 01:13:54 Shutter LASER close 01:13:54 Received message from Camera: op=State serial=48351 01:13:54 GetSingleValue result=40 Value=cccccccc 01:13:54 SkyScan query 01:13:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:13:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:13:54 Parameters OK 01:13:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:13:54 Set A/D data flow result=40 01:13:54 Set A/D channel type result=40 01:13:54 Set A/D encoding result=40 01:13:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:13:54 Set channel filter=0.000000e+000 result=40 01:13:54 Config A/D Result=40 01:13:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:13:54 Get A/D filter: -9.255963e+061 result=40 01:13:54 Get A/D value=-858993460 result=40 01:13:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:13:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:13:54 Parameters OK 01:13:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:13:54 Set A/D data flow result=40 01:13:54 Set A/D channel type result=40 01:13:54 Set A/D encoding result=40 01:13:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:13:54 Set channel filter=0.000000e+000 result=40 01:13:54 Config A/D Result=40 01:13:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:13:54 Get A/D filter: -9.255963e+061 result=40 01:13:54 Get A/D value=-858993460 result=40 01:13:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:13:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:13:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:13:54 Aux= 01:13:54 Message to Camera, serial 48351 queued 01:14:31 Received message from Master: op=PointingHead serial=48364 01:14:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:14:31 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:14:32 Point started: ret=0 01:14:32 point_skyscan result=0 01:14:33 Check angles 01:14:33 SkyScan query 01:14:33 SkyScan query done: ret=0 az=40.995<-2733 ze=21.225<-10585 Statuses=0008 0009 01:14:33 Msec=0 True Az=40.995 Ze=21.225 Az status=0008 Ze status=0009 01:14:33 Check angles 01:14:33 SkyScan query 01:14:34 SkyScan query done: ret=0 az=40.995<-2733 ze=0.255<-11983 Statuses=0008 0009 01:14:34 Msec=750 True Az=40.995 Ze=0.255 Az status=0008 Ze status=0009 01:14:34 Check angles 01:14:34 SkyScan query 01:14:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.7<-13380 Statuses=0008 0009 01:14:35 Msec=1500 True Az=40.995 Ze=-20.7 Az status=0008 Ze status=0009 01:14:35 Check angles 01:14:35 SkyScan query 01:14:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 01:14:35 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 01:14:36 Check angles 01:14:36 SkyScan query 01:14:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 01:14:36 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 01:14:36 Message to Master queued w/err=0: serial=48364 error=0 01:14:41 Received message from Master: op=Filter serial=48365 01:14:41 Color wheel filter change from 0 to 0 01:14:41 FLIGetFilterPos err=0 currentPosition=0 01:14:41 FLIGetStepsRemaining err=0 RemainingSteps=0 01:14:41 Filter is already there-color wheel unchanged 01:14:41 Received message from Master: op=Shutter serial=48366 01:14:41 Shutter LASER close 01:14:41 Received message from Camera: op=State serial=48368 01:14:41 GetSingleValue result=40 Value=cccccccc 01:14:41 SkyScan query 01:14:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:14:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:14:42 Parameters OK 01:14:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:14:42 Set A/D data flow result=40 01:14:42 Set A/D channel type result=40 01:14:42 Set A/D encoding result=40 01:14:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:14:42 Set channel filter=0.000000e+000 result=40 01:14:42 Config A/D Result=40 01:14:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:14:42 Get A/D filter: -9.255963e+061 result=40 01:14:42 Get A/D value=-858993460 result=40 01:14:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:14:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:14:42 Parameters OK 01:14:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:14:42 Set A/D data flow result=40 01:14:42 Set A/D channel type result=40 01:14:42 Set A/D encoding result=40 01:14:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:14:42 Set channel filter=0.000000e+000 result=40 01:14:42 Config A/D Result=40 01:14:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:14:42 Get A/D filter: -9.255963e+061 result=40 01:14:42 Get A/D value=-858993460 result=40 01:14:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:14:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:14:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:14:42 Aux= 01:14:42 Message to Camera, serial 48368 queued 01:15:19 Received message from Master: op=PointingHead serial=48381 01:15:19 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:15:19 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:15:19 Point started: ret=0 01:15:19 point_skyscan result=0 01:15:20 Check angles 01:15:20 SkyScan query 01:15:20 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.595<-16573 Statuses=0009 0009 01:15:20 Msec=0 True Az=64.17 Ze=-68.595 Az status=0009 Ze status=0009 01:15:21 Check angles 01:15:21 SkyScan query 01:15:21 SkyScan query done: ret=0 az=81.81<-5454 ze=-89.595<-17973 Statuses=0009 0009 01:15:21 Msec=750 True Az=81.81 Ze=-89.595 Az status=0009 Ze status=0009 01:15:21 Check angles 01:15:21 SkyScan query 01:15:22 SkyScan query done: ret=0 az=99.285<-6619 ze=-110.565<-19371 Statuses=0009 0009 01:15:22 Msec=1500 True Az=99.285 Ze=-110.565 Az status=0009 Ze status=0009 01:15:22 Check angles 01:15:22 SkyScan query 01:15:23 SkyScan query done: ret=0 az=116.79<-7786 ze=-131.49<-20766 Statuses=0009 0009 01:15:23 Msec=2250 True Az=116.79 Ze=-131.49 Az status=0009 Ze status=0009 01:15:23 Check angles 01:15:23 SkyScan query 01:15:23 SkyScan query done: ret=0 az=131.16<-8744 ze=-141.54<-21436 Statuses=0009 0008 01:15:23 Msec=3000 True Az=131.16 Ze=-141.54 Az status=0009 Ze status=0008 01:15:24 Check angles 01:15:24 SkyScan query 01:15:24 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:15:24 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:15:24 Message to Master queued w/err=0: serial=48381 error=0 01:15:29 Received message from Master: op=Identify serial=48382 01:15:29 Received message from Master: op=Filter serial=48385 01:15:29 Color wheel filter change from 0 to 0 01:15:29 FLIGetFilterPos err=0 currentPosition=0 01:15:29 FLIGetStepsRemaining err=0 RemainingSteps=0 01:15:29 Filter is already there-color wheel unchanged 01:15:29 Received message from Master: op=Shutter serial=48386 01:15:29 Shutter LASER close 01:15:29 Received message from Camera: op=State serial=48388 01:15:29 GetSingleValue result=40 Value=cccccccc 01:15:29 SkyScan query 01:15:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:15:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:15:30 Parameters OK 01:15:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:15:30 Set A/D data flow result=40 01:15:30 Set A/D channel type result=40 01:15:30 Set A/D encoding result=40 01:15:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:15:30 Set channel filter=0.000000e+000 result=40 01:15:30 Config A/D Result=40 01:15:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:15:30 Get A/D filter: -9.255963e+061 result=40 01:15:30 Get A/D value=-858993460 result=40 01:15:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:15:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:15:30 Parameters OK 01:15:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:15:30 Set A/D data flow result=40 01:15:30 Set A/D channel type result=40 01:15:30 Set A/D encoding result=40 01:15:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:15:30 Set channel filter=0.000000e+000 result=40 01:15:30 Config A/D Result=40 01:15:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:15:30 Get A/D filter: -9.255963e+061 result=40 01:15:30 Get A/D value=-858993460 result=40 01:15:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:15:30 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:15:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:15:30 Aux= [UTC 2018-12-11 01:15:30] 01:15:30 Message to Camera, serial 48388 queued [UTC 2018-12-11 01:15:54] 01:16:07 Received message from Master: op=PointingHead serial=48401 01:16:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:16:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:16:07 Point started: ret=0 01:16:07 point_skyscan result=0 01:16:08 Check angles 01:16:08 SkyScan query 01:16:08 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.45<-23430 Statuses=0009 0009 01:16:08 Msec=0 True Az=113.01 Ze=-171.45 Az status=0009 Ze status=0009 01:16:09 Check angles 01:16:09 SkyScan query 01:16:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:16:09 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:16:09 Message to Master queued w/err=0: serial=48401 error=0 01:16:14 Received message from Master: op=Filter serial=48402 01:16:14 Color wheel filter change from 0 to 0 01:16:14 FLIGetFilterPos err=0 currentPosition=0 01:16:14 FLIGetStepsRemaining err=0 RemainingSteps=0 01:16:14 Filter is already there-color wheel unchanged 01:16:14 Received message from Master: op=Shutter serial=48403 01:16:14 Shutter LASER open 01:16:15 Received message from Camera: op=State serial=48405 01:16:15 GetSingleValue result=40 Value=cccccccc 01:16:15 SkyScan query 01:16:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:16:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:16:15 Parameters OK 01:16:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:16:15 Set A/D data flow result=40 01:16:15 Set A/D channel type result=40 01:16:15 Set A/D encoding result=40 01:16:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:16:15 Set channel filter=0.000000e+000 result=40 01:16:15 Config A/D Result=40 01:16:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:16:15 Get A/D filter: -9.255963e+061 result=40 01:16:15 Get A/D value=-858993460 result=40 01:16:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:16:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:16:15 Parameters OK 01:16:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:16:15 Set A/D data flow result=40 01:16:15 Set A/D channel type result=40 01:16:15 Set A/D encoding result=40 01:16:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:16:15 Set channel filter=0.000000e+000 result=40 01:16:15 Config A/D Result=40 01:16:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:16:15 Get A/D filter: -9.255963e+061 result=40 01:16:15 Get A/D value=-858993460 result=40 01:16:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:16:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:16:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:16:15 Aux= 01:16:15 Message to Camera, serial 48405 queued 01:16:24 Received message from Master: op=Shutter serial=48415 01:16:24 Shutter LASER close 01:16:24 Received message from Master: op=PointingHead serial=48419 01:16:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:16:24 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:16:25 Point started: ret=0 01:16:25 point_skyscan result=0 01:16:25 Check angles 01:16:25 SkyScan query 01:16:26 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.37<-21558 Statuses=0009 0009 01:16:26 Msec=0 True Az=135.765 Ze=-143.37 Az status=0009 Ze status=0009 01:16:26 Check angles 01:16:26 SkyScan query 01:16:27 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.46<-20164 Statuses=0009 0009 01:16:27 Msec=750 True Az=153.24 Ze=-122.46 Az status=0009 Ze status=0009 01:16:27 Check angles 01:16:27 SkyScan query 01:16:27 SkyScan query done: ret=0 az=170.745<-11383 ze=-101.565<-18771 Statuses=0009 0009 01:16:27 Msec=1500 True Az=170.745 Ze=-101.565 Az status=0009 Ze status=0009 01:16:28 Check angles 01:16:28 SkyScan query 01:16:28 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.535<-17369 Statuses=0008 0009 01:16:28 Msec=2250 True Az=176.025 Ze=-80.535 Az status=0008 Ze status=0009 01:16:28 Check angles 01:16:28 SkyScan query 01:16:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.64<-15976 Statuses=0008 0009 01:16:29 Msec=3000 True Az=176.01 Ze=-59.64 Az status=0008 Ze status=0009 01:16:29 Check angles 01:16:29 SkyScan query 01:16:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:16:30 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:16:30 Message to Master queued w/err=0: serial=48419 error=0 01:16:35 Received message from Master: op=Filter serial=48420 01:16:35 Color wheel filter change from 0 to 0 01:16:35 FLIGetFilterPos err=0 currentPosition=0 01:16:35 FLIGetStepsRemaining err=0 RemainingSteps=0 01:16:35 Filter is already there-color wheel unchanged 01:16:35 Received message from Master: op=Shutter serial=48421 01:16:35 Shutter LASER close 01:16:35 Received message from Camera: op=State serial=48423 01:16:35 GetSingleValue result=40 Value=cccccccc 01:16:35 SkyScan query 01:16:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:16:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:16:36 Parameters OK 01:16:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:16:36 Set A/D data flow result=40 01:16:36 Set A/D channel type result=40 01:16:36 Set A/D encoding result=40 01:16:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:16:36 Set channel filter=0.000000e+000 result=40 01:16:36 Config A/D Result=40 01:16:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:16:36 Get A/D filter: -9.255963e+061 result=40 01:16:36 Get A/D value=-858993460 result=40 01:16:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:16:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:16:36 Parameters OK 01:16:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:16:36 Set A/D data flow result=40 01:16:36 Set A/D channel type result=40 01:16:36 Set A/D encoding result=40 01:16:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:16:36 Set channel filter=0.000000e+000 result=40 01:16:36 Config A/D Result=40 01:16:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:16:36 Get A/D filter: -9.255963e+061 result=40 01:16:36 Get A/D value=-858993460 result=40 01:16:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:16:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:16:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:16:36 Aux= 01:16:36 Message to Camera, serial 48423 queued 01:17:11 Received message from Master: op=PointingHead serial=48435 01:17:11 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:17:11 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:17:12 Point started: ret=0 01:17:12 point_skyscan result=0 01:17:13 Check angles 01:17:13 SkyScan query 01:17:13 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.99<-13466 Statuses=0009 0009 01:17:13 Msec=0 True Az=153.18 Ze=-21.99 Az status=0009 Ze status=0009 01:17:13 Check angles 01:17:13 SkyScan query 01:17:14 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.555<-12037 Statuses=0009 0009 01:17:14 Msec=750 True Az=135.42 Ze=-0.555 Az status=0009 Ze status=0009 01:17:14 Check angles 01:17:14 SkyScan query 01:17:15 SkyScan query done: ret=0 az=117.39<-7826 ze=20.85<-10610 Statuses=0009 0009 01:17:15 Msec=1500 True Az=117.39 Ze=20.85 Az status=0009 Ze status=0009 01:17:15 Check angles 01:17:15 SkyScan query 01:17:15 SkyScan query done: ret=0 az=100.05<-6670 ze=41.775<-9215 Statuses=0009 0009 01:17:15 Msec=2250 True Az=100.05 Ze=41.775 Az status=0009 Ze status=0009 01:17:16 Check angles 01:17:16 SkyScan query 01:17:16 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 01:17:16 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 01:17:16 Check angles 01:17:16 SkyScan query 01:17:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:17:17 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:17:17 Message to Master queued w/err=0: serial=48435 error=0 01:17:22 Received message from Master: op=Filter serial=48436 01:17:22 Color wheel filter change from 0 to 0 01:17:22 FLIGetFilterPos err=0 currentPosition=0 01:17:22 FLIGetStepsRemaining err=0 RemainingSteps=0 01:17:22 Filter is already there-color wheel unchanged 01:17:22 Received message from Master: op=Shutter serial=48437 01:17:22 Shutter LASER close 01:17:22 Received message from Camera: op=State serial=48439 01:17:22 GetSingleValue result=40 Value=cccccccc 01:17:22 SkyScan query 01:17:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:17:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:17:23 Parameters OK 01:17:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:17:23 Set A/D data flow result=40 01:17:23 Set A/D channel type result=40 01:17:23 Set A/D encoding result=40 01:17:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:17:23 Set channel filter=0.000000e+000 result=40 01:17:23 Config A/D Result=40 01:17:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:17:23 Get A/D filter: -9.255963e+061 result=40 01:17:23 Get A/D value=-858993460 result=40 01:17:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:17:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:17:23 Parameters OK 01:17:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:17:23 Set A/D data flow result=40 01:17:23 Set A/D channel type result=40 01:17:23 Set A/D encoding result=40 01:17:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:17:23 Set channel filter=0.000000e+000 result=40 01:17:23 Config A/D Result=40 01:17:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:17:23 Get A/D filter: -9.255963e+061 result=40 01:17:23 Get A/D value=-858993460 result=40 01:17:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:17:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:17:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:17:23 Aux= 01:17:23 Message to Camera, serial 48439 queued 01:17:59 Received message from Master: op=PointingHead serial=48451 01:17:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:17:59 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:17:59 Point started: ret=0 01:17:59 point_skyscan result=0 01:18:00 Check angles 01:18:00 SkyScan query 01:18:00 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 01:18:00 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 01:18:00 Check angles 01:18:00 SkyScan query 01:18:01 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 01:18:01 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 01:18:01 Check angles 01:18:01 SkyScan query 01:18:02 SkyScan query done: ret=0 az=144.48<-9632 ze=38.505<-9433 Statuses=0009 0008 01:18:02 Msec=1500 True Az=144.48 Ze=38.505 Az status=0009 Ze status=0008 01:18:02 Check angles 01:18:02 SkyScan query 01:18:03 SkyScan query done: ret=0 az=162.015<-10801 ze=38.505<-9433 Statuses=0009 0008 01:18:03 Msec=2250 True Az=162.015 Ze=38.505 Az status=0009 Ze status=0008 01:18:03 Check angles 01:18:03 SkyScan query 01:18:03 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:18:03 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:18:04 Check angles 01:18:04 SkyScan query 01:18:04 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:18:04 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:18:04 Message to Master queued w/err=0: serial=48451 error=0 01:18:09 Received message from Master: op=Filter serial=48452 01:18:09 Color wheel filter change from 0 to 0 01:18:09 FLIGetFilterPos err=0 currentPosition=0 01:18:09 FLIGetStepsRemaining err=0 RemainingSteps=0 01:18:09 Filter is already there-color wheel unchanged 01:18:09 Received message from Master: op=Shutter serial=48453 01:18:09 Shutter LASER close 01:18:09 Received message from Camera: op=State serial=48455 01:18:09 GetSingleValue result=40 Value=cccccccc 01:18:09 SkyScan query 01:18:10 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:18:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:18:10 Parameters OK 01:18:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:18:10 Set A/D data flow result=40 01:18:10 Set A/D channel type result=40 01:18:10 Set A/D encoding result=40 01:18:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:18:10 Set channel filter=0.000000e+000 result=40 01:18:10 Config A/D Result=40 01:18:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:18:10 Get A/D filter: -9.255963e+061 result=40 01:18:10 Get A/D value=-858993460 result=40 01:18:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:18:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:18:10 Parameters OK 01:18:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:18:10 Set A/D data flow result=40 01:18:10 Set A/D channel type result=40 01:18:10 Set A/D encoding result=40 01:18:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:18:10 Set channel filter=0.000000e+000 result=40 01:18:10 Config A/D Result=40 01:18:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:18:10 Get A/D filter: -9.255963e+061 result=40 01:18:10 Get A/D value=-858993460 result=40 01:18:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:18:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:18:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:18:10 Aux= 01:18:10 Message to Camera, serial 48455 queued 01:18:47 Received message from Master: op=PointingHead serial=48468 01:18:47 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:18:47 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:18:47 Point started: ret=0 01:18:47 point_skyscan result=0 01:18:48 Check angles 01:18:48 SkyScan query 01:18:48 SkyScan query done: ret=0 az=152.79<-10186 ze=8.55<-11430 Statuses=0009 0009 01:18:48 Msec=0 True Az=152.79 Ze=8.55 Az status=0009 Ze status=0009 01:18:49 Check angles 01:18:49 SkyScan query 01:18:49 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.42<-12828 Statuses=0009 0009 01:18:49 Msec=750 True Az=135.405 Ze=-12.42 Az status=0009 Ze status=0009 01:18:49 Check angles 01:18:49 SkyScan query 01:18:50 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.33<-14222 Statuses=0009 0009 01:18:50 Msec=1500 True Az=117.765 Ze=-33.33 Az status=0009 Ze status=0009 01:18:50 Check angles 01:18:50 SkyScan query 01:18:51 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.54<-15436 Statuses=0009 0009 01:18:51 Msec=2250 True Az=100.38 Ze=-51.54 Az status=0009 Ze status=0009 01:18:51 Check angles 01:18:51 SkyScan query 01:18:51 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 01:18:51 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 01:18:52 Check angles 01:18:52 SkyScan query 01:18:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:18:52 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:18:52 Message to Master queued w/err=0: serial=48468 error=0 01:18:57 Received message from Master: op=Filter serial=48469 01:18:57 Color wheel filter change from 0 to 0 01:18:57 FLIGetFilterPos err=0 currentPosition=0 01:18:57 FLIGetStepsRemaining err=0 RemainingSteps=0 01:18:57 Filter is already there-color wheel unchanged 01:18:57 Received message from Master: op=Shutter serial=48470 01:18:57 Shutter LASER close 01:18:57 Received message from Camera: op=State serial=48472 01:18:57 GetSingleValue result=40 Value=cccccccc 01:18:57 SkyScan query 01:18:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:18:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:18:58 Parameters OK 01:18:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:18:58 Set A/D data flow result=40 01:18:58 Set A/D channel type result=40 01:18:58 Set A/D encoding result=40 01:18:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:18:58 Set channel filter=0.000000e+000 result=40 01:18:58 Config A/D Result=40 01:18:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:18:58 Get A/D filter: -9.255963e+061 result=40 01:18:58 Get A/D value=-858993460 result=40 01:18:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:18:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:18:58 Parameters OK 01:18:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:18:58 Set A/D data flow result=40 01:18:58 Set A/D channel type result=40 01:18:58 Set A/D encoding result=40 01:18:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:18:58 Set channel filter=0.000000e+000 result=40 01:18:58 Config A/D Result=40 01:18:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:18:58 Get A/D filter: -9.255963e+061 result=40 01:18:58 Get A/D value=-858993460 result=40 01:18:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:18:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:18:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:18:58 Aux= 01:18:58 Message to Camera, serial 48472 queued 01:19:35 Received message from Master: op=PointingHead serial=48485 01:19:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:19:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:19:35 Point started: ret=0 01:19:35 point_skyscan result=0 01:19:36 Check angles 01:19:36 SkyScan query 01:19:36 SkyScan query done: ret=0 az=109.05<-7270 ze=-81.495<-17433 Statuses=0009 0009 01:19:36 Msec=0 True Az=109.05 Ze=-81.495 Az status=0009 Ze status=0009 01:19:37 Check angles 01:19:37 SkyScan query 01:19:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.345<-18823 Statuses=0008 0009 01:19:37 Msec=750 True Az=112.995 Ze=-102.345 Az status=0008 Ze status=0009 01:19:37 Check angles 01:19:37 SkyScan query 01:19:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.27<-20218 Statuses=0008 0009 01:19:38 Msec=1500 True Az=112.995 Ze=-123.27 Az status=0008 Ze status=0009 01:19:38 Check angles 01:19:38 SkyScan query 01:19:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.675<-21645 Statuses=0008 0009 01:19:39 Msec=2250 True Az=112.995 Ze=-144.675 Az status=0008 Ze status=0009 01:19:39 Check angles 01:19:39 SkyScan query 01:19:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.645<-23043 Statuses=0008 0009 01:19:39 Msec=3000 True Az=112.995 Ze=-165.645 Az status=0008 Ze status=0009 01:19:40 Check angles 01:19:40 SkyScan query 01:19:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:19:40 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:19:40 Message to Master queued w/err=0: serial=48485 error=0 01:19:45 Received message from Master: op=Filter serial=48486 01:19:45 Color wheel filter change from 0 to 0 01:19:45 FLIGetFilterPos err=0 currentPosition=0 01:19:45 FLIGetStepsRemaining err=0 RemainingSteps=0 01:19:45 Filter is already there-color wheel unchanged 01:19:45 Received message from Master: op=Shutter serial=48487 01:19:45 Shutter LASER open 01:19:46 Received message from Camera: op=State serial=48489 01:19:46 GetSingleValue result=40 Value=cccccccc 01:19:46 SkyScan query 01:19:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:19:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:19:46 Parameters OK 01:19:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:19:46 Set A/D data flow result=40 01:19:46 Set A/D channel type result=40 01:19:46 Set A/D encoding result=40 01:19:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:19:46 Set channel filter=0.000000e+000 result=40 01:19:46 Config A/D Result=40 01:19:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:19:46 Get A/D filter: -9.255963e+061 result=40 01:19:46 Get A/D value=-858993460 result=40 01:19:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:19:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:19:46 Parameters OK 01:19:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:19:46 Set A/D data flow result=40 01:19:46 Set A/D channel type result=40 01:19:46 Set A/D encoding result=40 01:19:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:19:46 Set channel filter=0.000000e+000 result=40 01:19:46 Config A/D Result=40 01:19:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:19:46 Get A/D filter: -9.255963e+061 result=40 01:19:46 Get A/D value=-858993460 result=40 01:19:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:19:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:19:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:19:46 Aux= 01:19:46 Message to Camera, serial 48489 queued 01:19:55 Received message from Master: op=Shutter serial=48499 01:19:55 Shutter LASER close 01:19:55 Received message from Master: op=PointingHead serial=48503 01:19:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:19:55 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:19:55 Point started: ret=0 01:19:55 point_skyscan result=0 01:19:56 Check angles 01:19:56 SkyScan query 01:19:57 SkyScan query done: ret=0 az=89.91<-5994 ze=157.32<-1512 Statuses=0009 0009 01:19:57 Msec=0 True Az=89.91 Ze=157.32 Az status=0009 Ze status=0009 01:19:57 Check angles 01:19:57 SkyScan query 01:19:57 SkyScan query done: ret=0 az=72.06<-4804 ze=135.885<-2941 Statuses=0009 0009 01:19:57 Msec=750 True Az=72.06 Ze=135.885 Az status=0009 Ze status=0009 01:19:58 Check angles 01:19:58 SkyScan query 01:19:58 SkyScan query done: ret=0 az=54.825<-3655 ze=114.945<-4337 Statuses=0009 0009 01:19:58 Msec=1500 True Az=54.825 Ze=114.945 Az status=0009 Ze status=0009 01:19:58 Check angles 01:19:58 SkyScan query 01:19:59 SkyScan query done: ret=0 az=40.95<-2730 ze=93.57<-5762 Statuses=0009 0009 01:19:59 Msec=2250 True Az=40.95 Ze=93.57 Az status=0009 Ze status=0009 01:19:59 Check angles 01:19:59 SkyScan query 01:20:00 SkyScan query done: ret=0 az=40.995<-2733 ze=72.585<-7161 Statuses=0008 0009 01:20:00 Msec=3000 True Az=40.995 Ze=72.585 Az status=0008 Ze status=0009 01:20:00 Check angles 01:20:00 SkyScan query 01:20:00 SkyScan query done: ret=0 az=40.995<-2733 ze=52.335<-8511 Statuses=0008 0009 01:20:00 Msec=3750 True Az=40.995 Ze=52.335 Az status=0008 Ze status=0009 01:20:01 Check angles 01:20:01 SkyScan query 01:20:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:20:01 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:20:01 Message to Master queued w/err=0: serial=48503 error=0 01:20:06 Received message from Master: op=Filter serial=48504 01:20:06 Color wheel filter change from 0 to 0 01:20:06 FLIGetFilterPos err=0 currentPosition=0 01:20:06 FLIGetStepsRemaining err=0 RemainingSteps=0 01:20:06 Filter is already there-color wheel unchanged 01:20:06 Received message from Master: op=Shutter serial=48505 01:20:06 Shutter LASER close 01:20:07 Received message from Camera: op=State serial=48507 01:20:07 GetSingleValue result=40 Value=cccccccc 01:20:07 SkyScan query 01:20:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:20:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:20:07 Parameters OK 01:20:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:20:07 Set A/D data flow result=40 01:20:07 Set A/D channel type result=40 01:20:07 Set A/D encoding result=40 01:20:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:20:07 Set channel filter=0.000000e+000 result=40 01:20:07 Config A/D Result=40 01:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:20:07 Get A/D filter: -9.255963e+061 result=40 01:20:07 Get A/D value=-858993460 result=40 01:20:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:20:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:20:07 Parameters OK 01:20:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:20:07 Set A/D data flow result=40 01:20:07 Set A/D channel type result=40 01:20:07 Set A/D encoding result=40 01:20:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:20:07 Set channel filter=0.000000e+000 result=40 01:20:07 Config A/D Result=40 01:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:20:07 Get A/D filter: -9.255963e+061 result=40 01:20:07 Get A/D value=-858993460 result=40 01:20:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:20:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:20:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:20:07 Aux= 01:20:07 Message to Camera, serial 48507 queued 01:20:44 Received message from Master: op=PointingHead serial=48520 01:20:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:20:44 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:20:44 Point started: ret=0 01:20:44 point_skyscan result=0 01:20:45 Check angles 01:20:45 SkyScan query 01:20:46 SkyScan query done: ret=0 az=40.995<-2733 ze=21.825<-10545 Statuses=0008 0009 01:20:46 Msec=0 True Az=40.995 Ze=21.825 Az status=0008 Ze status=0009 01:20:46 Check angles 01:20:46 SkyScan query 01:20:47 SkyScan query done: ret=0 az=40.995<-2733 ze=0.87<-11942 Statuses=0008 0009 01:20:47 Msec=750 True Az=40.995 Ze=0.87 Az status=0008 Ze status=0009 01:20:47 Check angles 01:20:47 SkyScan query 01:20:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.085<-13339 Statuses=0008 0009 01:20:47 Msec=1500 True Az=40.995 Ze=-20.085 Az status=0008 Ze status=0009 01:20:47 Check angles 01:20:47 SkyScan query 01:20:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0009 01:20:48 Msec=2250 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0009 01:20:48 Check angles 01:20:48 SkyScan query 01:20:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 01:20:49 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 01:20:49 Message to Master queued w/err=0: serial=48520 error=0 01:20:54 Received message from Master: op=Filter serial=48521 01:20:54 Color wheel filter change from 0 to 0 01:20:54 FLIGetFilterPos err=0 currentPosition=0 01:20:54 FLIGetStepsRemaining err=0 RemainingSteps=0 01:20:54 Filter is already there-color wheel unchanged 01:20:54 Received message from Master: op=Shutter serial=48522 01:20:54 Shutter LASER close 01:20:54 Received message from Camera: op=State serial=48524 01:20:54 GetSingleValue result=40 Value=cccccccc 01:20:54 SkyScan query 01:20:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:20:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:20:55 Parameters OK 01:20:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:20:55 Set A/D data flow result=40 01:20:55 Set A/D channel type result=40 01:20:55 Set A/D encoding result=40 01:20:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:20:55 Set channel filter=0.000000e+000 result=40 01:20:55 Config A/D Result=40 01:20:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:20:55 Get A/D filter: -9.255963e+061 result=40 01:20:55 Get A/D value=-858993460 result=40 01:20:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:20:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:20:55 Parameters OK 01:20:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:20:55 Set A/D data flow result=40 01:20:55 Set A/D channel type result=40 01:20:55 Set A/D encoding result=40 01:20:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:20:55 Set channel filter=0.000000e+000 result=40 01:20:55 Config A/D Result=40 01:20:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:20:55 Get A/D filter: -9.255963e+061 result=40 01:20:55 Get A/D value=-858993460 result=40 01:20:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:20:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:20:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:20:55 Aux= 01:20:55 Message to Camera, serial 48524 queued 01:21:31 Received message from Master: op=PointingHead serial=48537 01:21:31 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:21:31 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:21:32 Point started: ret=0 01:21:32 point_skyscan result=0 01:21:33 Check angles 01:21:33 SkyScan query 01:21:33 SkyScan query done: ret=0 az=63.75<-4250 ze=-67.98<-16532 Statuses=0009 0009 01:21:33 Msec=0 True Az=63.75 Ze=-67.98 Az status=0009 Ze status=0009 01:21:33 Check angles 01:21:33 SkyScan query 01:21:34 SkyScan query done: ret=0 az=81.225<-5415 ze=-88.95<-17930 Statuses=0009 0009 01:21:34 Msec=750 True Az=81.225 Ze=-88.95 Az status=0009 Ze status=0009 01:21:34 Check angles 01:21:34 SkyScan query 01:21:35 SkyScan query done: ret=0 az=98.685<-6579 ze=-109.875<-19325 Statuses=0009 0009 01:21:35 Msec=1500 True Az=98.685 Ze=-109.875 Az status=0009 Ze status=0009 01:21:35 Check angles 01:21:35 SkyScan query 01:21:35 SkyScan query done: ret=0 az=116.115<-7741 ze=-130.83<-20722 Statuses=0009 0009 01:21:35 Msec=2250 True Az=116.115 Ze=-130.83 Az status=0009 Ze status=0009 01:21:36 Check angles 01:21:36 SkyScan query 01:21:36 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.555<-21437 Statuses=0009 0008 01:21:36 Msec=3000 True Az=131.115 Ze=-141.555 Az status=0009 Ze status=0008 01:21:36 Check angles 01:21:36 SkyScan query 01:21:37 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 01:21:37 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 01:21:37 Message to Master queued w/err=0: serial=48537 error=0 01:21:42 Received message from Master: op=Filter serial=48538 01:21:42 Color wheel filter change from 0 to 0 01:21:42 FLIGetFilterPos err=0 currentPosition=0 01:21:42 FLIGetStepsRemaining err=0 RemainingSteps=0 01:21:42 Filter is already there-color wheel unchanged 01:21:42 Received message from Master: op=Shutter serial=48539 01:21:42 Shutter LASER close 01:21:42 Received message from Camera: op=State serial=48541 01:21:42 GetSingleValue result=40 Value=cccccccc 01:21:42 SkyScan query 01:21:43 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:21:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:21:43 Parameters OK 01:21:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:21:43 Set A/D data flow result=40 01:21:43 Set A/D channel type result=40 01:21:43 Set A/D encoding result=40 01:21:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:21:43 Set channel filter=0.000000e+000 result=40 01:21:43 Config A/D Result=40 01:21:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:21:43 Get A/D filter: -9.255963e+061 result=40 01:21:43 Get A/D value=-858993460 result=40 01:21:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:21:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:21:43 Parameters OK 01:21:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:21:43 Set A/D data flow result=40 01:21:43 Set A/D channel type result=40 01:21:43 Set A/D encoding result=40 01:21:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:21:43 Set channel filter=0.000000e+000 result=40 01:21:43 Config A/D Result=40 01:21:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:21:43 Get A/D filter: -9.255963e+061 result=40 01:21:43 Get A/D value=-858993460 result=40 01:21:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:21:43 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:21:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:21:43 Aux= 01:21:43 Message to Camera, serial 48541 queued 01:22:19 Received message from Master: op=PointingHead serial=48554 01:22:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:22:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:22:20 Point started: ret=0 01:22:20 point_skyscan result=0 01:22:21 Check angles 01:22:21 SkyScan query 01:22:21 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.15<-23410 Statuses=0009 0009 01:22:21 Msec=0 True Az=113.01 Ze=-171.15 Az status=0009 Ze status=0009 01:22:21 Check angles 01:22:21 SkyScan query 01:22:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:22:22 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:22:22 Message to Master queued w/err=0: serial=48554 error=0 01:22:27 Received message from Master: op=Filter serial=48555 01:22:27 Color wheel filter change from 0 to 0 01:22:27 FLIGetFilterPos err=0 currentPosition=0 01:22:27 FLIGetStepsRemaining err=0 RemainingSteps=0 01:22:27 Filter is already there-color wheel unchanged 01:22:27 Received message from Master: op=Shutter serial=48556 01:22:27 Shutter LASER open 01:22:27 Received message from Camera: op=State serial=48558 01:22:27 GetSingleValue result=40 Value=cccccccc 01:22:27 SkyScan query 01:22:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:22:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:22:28 Parameters OK 01:22:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:22:28 Set A/D data flow result=40 01:22:28 Set A/D channel type result=40 01:22:28 Set A/D encoding result=40 01:22:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:22:28 Set channel filter=0.000000e+000 result=40 01:22:28 Config A/D Result=40 01:22:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:22:28 Get A/D filter: -9.255963e+061 result=40 01:22:28 Get A/D value=-858993460 result=40 01:22:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:22:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:22:28 Parameters OK 01:22:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:22:28 Set A/D data flow result=40 01:22:28 Set A/D channel type result=40 01:22:28 Set A/D encoding result=40 01:22:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:22:28 Set channel filter=0.000000e+000 result=40 01:22:28 Config A/D Result=40 01:22:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:22:28 Get A/D filter: -9.255963e+061 result=40 01:22:28 Get A/D value=-858993460 result=40 01:22:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:22:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:22:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:22:28 Aux= 01:22:28 Message to Camera, serial 48558 queued 01:22:36 Received message from Master: op=Shutter serial=48568 01:22:36 Shutter LASER close 01:22:37 Received message from Master: op=PointingHead serial=48572 01:22:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:22:37 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:22:37 Point started: ret=0 01:22:37 point_skyscan result=0 01:22:38 Check angles 01:22:38 SkyScan query 01:22:39 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.77<-21518 Statuses=0009 0009 01:22:39 Msec=0 True Az=136.38 Ze=-142.77 Az status=0009 Ze status=0009 01:22:39 Check angles 01:22:39 SkyScan query 01:22:39 SkyScan query done: ret=0 az=153.825<-10255 ze=-121.785<-20119 Statuses=0009 0009 01:22:39 Msec=750 True Az=153.825 Ze=-121.785 Az status=0009 Ze status=0009 01:22:40 Check angles 01:22:40 SkyScan query 01:22:40 SkyScan query done: ret=0 az=171.27<-11418 ze=-100.86<-18724 Statuses=0009 0009 01:22:40 Msec=1500 True Az=171.27 Ze=-100.86 Az status=0009 Ze status=0009 01:22:40 Check angles 01:22:40 SkyScan query 01:22:41 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.965<-17331 Statuses=0008 0009 01:22:41 Msec=2250 True Az=176.025 Ze=-79.965 Az status=0008 Ze status=0009 01:22:41 Check angles 01:22:41 SkyScan query 01:22:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.965<-15931 Statuses=0008 0009 01:22:42 Msec=3000 True Az=175.995 Ze=-58.965 Az status=0008 Ze status=0009 01:22:42 Check angles 01:22:42 SkyScan query 01:22:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 01:22:42 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 01:22:42 Message to Master queued w/err=0: serial=48572 error=0 01:22:47 Received message from Master: op=Filter serial=48573 01:22:47 Color wheel filter change from 0 to 0 01:22:47 FLIGetFilterPos err=0 currentPosition=0 01:22:47 FLIGetStepsRemaining err=0 RemainingSteps=0 01:22:47 Filter is already there-color wheel unchanged 01:22:48 Received message from Master: op=Shutter serial=48574 01:22:48 Shutter LASER close 01:22:48 Received message from Camera: op=State serial=48576 01:22:48 GetSingleValue result=40 Value=cccccccc 01:22:48 SkyScan query 01:22:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:22:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:22:48 Parameters OK 01:22:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:22:48 Set A/D data flow result=40 01:22:48 Set A/D channel type result=40 01:22:48 Set A/D encoding result=40 01:22:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:22:48 Set channel filter=0.000000e+000 result=40 01:22:48 Config A/D Result=40 01:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:22:48 Get A/D filter: -9.255963e+061 result=40 01:22:48 Get A/D value=-858993460 result=40 01:22:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:22:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:22:48 Parameters OK 01:22:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:22:48 Set A/D data flow result=40 01:22:48 Set A/D channel type result=40 01:22:48 Set A/D encoding result=40 01:22:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:22:48 Set channel filter=0.000000e+000 result=40 01:22:48 Config A/D Result=40 01:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:22:48 Get A/D filter: -9.255963e+061 result=40 01:22:48 Get A/D value=-858993460 result=40 01:22:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:22:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:22:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:22:48 Aux= 01:22:48 Message to Camera, serial 48576 queued 01:23:25 Received message from Master: op=PointingHead serial=48589 01:23:25 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:23:25 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:23:25 Point started: ret=0 01:23:25 point_skyscan result=0 01:23:26 Check angles 01:23:26 SkyScan query 01:23:27 SkyScan query done: ret=0 az=152.55<-10170 ze=-21.255<-13417 Statuses=0009 0009 01:23:27 Msec=0 True Az=152.55 Ze=-21.255 Az status=0009 Ze status=0009 01:23:27 Check angles 01:23:27 SkyScan query 01:23:28 SkyScan query done: ret=0 az=135.015<-9001 ze=-0.33<-12022 Statuses=0009 0009 01:23:28 Msec=750 True Az=135.015 Ze=-0.33 Az status=0009 Ze status=0009 01:23:28 Check angles 01:23:28 SkyScan query 01:23:28 SkyScan query done: ret=0 az=117.48<-7832 ze=20.64<-10624 Statuses=0009 0009 01:23:28 Msec=1500 True Az=117.48 Ze=20.64 Az status=0009 Ze status=0009 01:23:29 Check angles 01:23:29 SkyScan query 01:23:29 SkyScan query done: ret=0 az=100.11<-6674 ze=41.58<-9228 Statuses=0009 0009 01:23:29 Msec=2250 True Az=100.11 Ze=41.58 Az status=0009 Ze status=0009 01:23:29 Check angles 01:23:29 SkyScan query 01:23:30 SkyScan query done: ret=0 az=86.055<-5737 ze=51.57<-8562 Statuses=0009 0008 01:23:30 Msec=3000 True Az=86.055 Ze=51.57 Az status=0009 Ze status=0008 01:23:30 Check angles 01:23:30 SkyScan query 01:23:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:23:31 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:23:31 Message to Master queued w/err=0: serial=48589 error=0 01:23:36 Received message from Master: op=Filter serial=48590 01:23:36 Color wheel filter change from 0 to 0 01:23:36 FLIGetFilterPos err=0 currentPosition=0 01:23:36 FLIGetStepsRemaining err=0 RemainingSteps=0 01:23:36 Filter is already there-color wheel unchanged 01:23:36 Received message from Master: op=Shutter serial=48591 01:23:36 Shutter LASER close 01:23:36 Received message from Camera: op=State serial=48593 01:23:36 GetSingleValue result=40 Value=cccccccc 01:23:36 SkyScan query 01:23:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:23:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:23:36 Parameters OK 01:23:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:23:36 Set A/D data flow result=40 01:23:36 Set A/D channel type result=40 01:23:36 Set A/D encoding result=40 01:23:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:23:36 Set channel filter=0.000000e+000 result=40 01:23:36 Config A/D Result=40 01:23:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:23:36 Get A/D filter: -9.255963e+061 result=40 01:23:36 Get A/D value=-858993460 result=40 01:23:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:23:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:23:36 Parameters OK 01:23:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:23:36 Set A/D data flow result=40 01:23:36 Set A/D channel type result=40 01:23:36 Set A/D encoding result=40 01:23:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:23:36 Set channel filter=0.000000e+000 result=40 01:23:36 Config A/D Result=40 01:23:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:23:36 Get A/D filter: -9.255963e+061 result=40 01:23:36 Get A/D value=-858993460 result=40 01:23:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:23:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:23:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:23:36 Aux= 01:23:36 Message to Camera, serial 48593 queued 01:24:13 Received message from Master: op=PointingHead serial=48606 01:24:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:24:13 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:24:14 Point started: ret=0 01:24:14 point_skyscan result=0 01:24:14 Check angles 01:24:14 SkyScan query 01:24:15 SkyScan query done: ret=0 az=108.855<-7257 ze=38.475<-9435 Statuses=0009 0008 01:24:15 Msec=0 True Az=108.855 Ze=38.475 Az status=0009 Ze status=0008 01:24:15 Check angles 01:24:15 SkyScan query 01:24:16 SkyScan query done: ret=0 az=126.495<-8433 ze=38.505<-9433 Statuses=0009 0008 01:24:16 Msec=750 True Az=126.495 Ze=38.505 Az status=0009 Ze status=0008 01:24:16 Check angles 01:24:16 SkyScan query 01:24:16 SkyScan query done: ret=0 az=143.82<-9588 ze=38.505<-9433 Statuses=0009 0008 01:24:16 Msec=1500 True Az=143.82 Ze=38.505 Az status=0009 Ze status=0008 01:24:17 Check angles 01:24:17 SkyScan query 01:24:17 SkyScan query done: ret=0 az=161.19<-10746 ze=38.505<-9433 Statuses=0009 0008 01:24:17 Msec=2250 True Az=161.19 Ze=38.505 Az status=0009 Ze status=0008 01:24:17 Check angles 01:24:17 SkyScan query 01:24:18 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 01:24:18 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 01:24:18 Check angles 01:24:18 SkyScan query 01:24:19 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:24:19 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:24:19 Message to Master queued w/err=0: serial=48606 error=0 01:24:24 Received message from Master: op=Filter serial=48607 01:24:24 Color wheel filter change from 0 to 0 01:24:24 FLIGetFilterPos err=0 currentPosition=0 01:24:24 FLIGetStepsRemaining err=0 RemainingSteps=0 01:24:24 Filter is already there-color wheel unchanged 01:24:24 Received message from Master: op=Shutter serial=48608 01:24:24 Shutter LASER close 01:24:24 Received message from Camera: op=State serial=48610 01:24:24 GetSingleValue result=40 Value=cccccccc 01:24:24 SkyScan query 01:24:24 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:24:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:24:24 Parameters OK 01:24:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:24:24 Set A/D data flow result=40 01:24:24 Set A/D channel type result=40 01:24:24 Set A/D encoding result=40 01:24:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:24:24 Set channel filter=0.000000e+000 result=40 01:24:24 Config A/D Result=40 01:24:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:24:24 Get A/D filter: -9.255963e+061 result=40 01:24:24 Get A/D value=-858993460 result=40 01:24:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:24:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:24:24 Parameters OK 01:24:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:24:24 Set A/D data flow result=40 01:24:24 Set A/D channel type result=40 01:24:24 Set A/D encoding result=40 01:24:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:24:24 Set channel filter=0.000000e+000 result=40 01:24:24 Config A/D Result=40 01:24:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:24:24 Get A/D filter: -9.255963e+061 result=40 01:24:24 Get A/D value=-858993460 result=40 01:24:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:24:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:24:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:24:24 Aux= 01:24:24 Message to Camera, serial 48610 queued 01:25:01 Received message from Master: op=PointingHead serial=48623 01:25:01 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:25:01 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:25:02 Point started: ret=0 01:25:02 point_skyscan result=0 01:25:02 Check angles 01:25:02 SkyScan query 01:25:03 SkyScan query done: ret=0 az=152.685<-10179 ze=8.19<-11454 Statuses=0009 0009 01:25:03 Msec=0 True Az=152.685 Ze=8.19 Az status=0009 Ze status=0009 01:25:03 Check angles 01:25:03 SkyScan query 01:25:04 SkyScan query done: ret=0 az=135.12<-9008 ze=-12.72<-12848 Statuses=0009 0009 01:25:04 Msec=750 True Az=135.12 Ze=-12.72 Az status=0009 Ze status=0009 01:25:04 Check angles 01:25:04 SkyScan query 01:25:05 SkyScan query done: ret=0 az=117.255<-7817 ze=-34.17<-14278 Statuses=0009 0009 01:25:05 Msec=1500 True Az=117.255 Ze=-34.17 Az status=0009 Ze status=0009 01:25:05 Check angles 01:25:05 SkyScan query 01:25:05 SkyScan query done: ret=0 az=99.99<-6666 ze=-51.57<-15438 Statuses=0009 0009 01:25:05 Msec=2250 True Az=99.99 Ze=-51.57 Az status=0009 Ze status=0009 01:25:05 Check angles 01:25:05 SkyScan query 01:25:06 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 01:25:06 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 01:25:06 Check angles 01:25:06 SkyScan query 01:25:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:25:07 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:25:07 Message to Master queued w/err=0: serial=48623 error=0 01:25:12 Received message from Master: op=Filter serial=48624 01:25:12 Color wheel filter change from 0 to 0 01:25:12 FLIGetFilterPos err=0 currentPosition=0 01:25:12 FLIGetStepsRemaining err=0 RemainingSteps=0 01:25:12 Filter is already there-color wheel unchanged 01:25:12 Received message from Master: op=Shutter serial=48625 01:25:12 Shutter LASER close 01:25:12 Received message from Camera: op=State serial=48627 01:25:12 GetSingleValue result=40 Value=cccccccc 01:25:12 SkyScan query 01:25:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:25:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:25:13 Parameters OK 01:25:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:25:13 Set A/D data flow result=40 01:25:13 Set A/D channel type result=40 01:25:13 Set A/D encoding result=40 01:25:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:25:13 Set channel filter=0.000000e+000 result=40 01:25:13 Config A/D Result=40 01:25:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:25:13 Get A/D filter: -9.255963e+061 result=40 01:25:13 Get A/D value=-858993460 result=40 01:25:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:25:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:25:13 Parameters OK 01:25:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:25:13 Set A/D data flow result=40 01:25:13 Set A/D channel type result=40 01:25:13 Set A/D encoding result=40 01:25:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:25:13 Set channel filter=0.000000e+000 result=40 01:25:13 Config A/D Result=40 01:25:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:25:13 Get A/D filter: -9.255963e+061 result=40 01:25:13 Get A/D value=-858993460 result=40 01:25:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:25:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:25:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:25:13 Aux= 01:25:13 Message to Camera, serial 48627 queued 01:25:49 Received message from Master: op=PointingHead serial=48640 01:25:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:25:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:25:50 Point started: ret=0 01:25:50 point_skyscan result=0 01:25:51 Check angles 01:25:51 SkyScan query 01:25:51 SkyScan query done: ret=0 az=109.065<-7271 ze=-81.36<-17424 Statuses=0009 0009 01:25:51 Msec=0 True Az=109.065 Ze=-81.36 Az status=0009 Ze status=0009 01:25:51 Check angles 01:25:51 SkyScan query 01:25:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.33<-18822 Statuses=0008 0009 01:25:52 Msec=750 True Az=112.995 Ze=-102.33 Az status=0008 Ze status=0009 01:25:52 Check angles 01:25:52 SkyScan query 01:25:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.27<-20218 Statuses=0008 0009 01:25:53 Msec=1500 True Az=112.995 Ze=-123.27 Az status=0008 Ze status=0009 01:25:53 Check angles 01:25:53 SkyScan query 01:25:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.255<-21617 Statuses=0008 0009 01:25:53 Msec=2250 True Az=112.995 Ze=-144.255 Az status=0008 Ze status=0009 01:25:54 Check angles 01:25:54 SkyScan query 01:25:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.18<-23012 Statuses=0008 0009 01:25:54 Msec=3000 True Az=112.995 Ze=-165.18 Az status=0008 Ze status=0009 01:25:54 Check angles 01:25:54 SkyScan query 01:25:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:25:55 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:25:55 Message to Master queued w/err=0: serial=48640 error=0 01:26:00 Received message from Master: op=Filter serial=48641 [UTC 2018-12-11 01:26:00] 01:26:00 Color wheel filter change from 0 to 0 01:26:00 FLIGetFilterPos err=0 currentPosition=0 01:26:00 FLIGetStepsRemaining err=0 RemainingSteps=0 01:26:00 Filter is already there-color wheel unchanged 01:26:00 Received message from Master: op=Shutter serial=48642 01:26:00 Shutter LASER open 01:26:00 Received message from Camera: op=State serial=48644 01:26:00 GetSingleValue result=40 Value=cccccccc 01:26:00 SkyScan query 01:26:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:26:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:26:01 Parameters OK 01:26:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:26:01 Set A/D data flow result=40 01:26:01 Set A/D channel type result=40 01:26:01 Set A/D encoding result=40 01:26:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:26:01 Set channel filter=0.000000e+000 result=40 01:26:01 Config A/D Result=40 01:26:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:26:01 Get A/D filter: -9.255963e+061 result=40 01:26:01 Get A/D value=-858993460 result=40 01:26:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:26:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:26:01 Parameters OK 01:26:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:26:01 Set A/D data flow result=40 01:26:01 Set A/D channel type result=40 01:26:01 Set A/D encoding result=40 01:26:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:26:01 Set channel filter=0.000000e+000 result=40 01:26:01 Config A/D Result=40 01:26:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:26:01 Get A/D filter: -9.255963e+061 result=40 01:26:01 Get A/D value=-858993460 result=40 01:26:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:26:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:26:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:26:01 Aux= 01:26:01 Message to Camera, serial 48644 queued 01:26:09 Received message from Master: op=Shutter serial=48654 01:26:09 Shutter LASER close 01:26:10 Received message from Master: op=PointingHead serial=48658 01:26:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:26:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:26:10 Point started: ret=0 01:26:10 point_skyscan result=0 01:26:11 Check angles 01:26:11 SkyScan query 01:26:11 SkyScan query done: ret=0 az=90.21<-6014 ze=157.59<-1494 Statuses=0009 0009 01:26:11 Msec=0 True Az=90.21 Ze=157.59 Az status=0009 Ze status=0009 01:26:12 Check angles 01:26:12 SkyScan query 01:26:12 SkyScan query done: ret=0 az=72.78<-4852 ze=136.59<-2894 Statuses=0009 0009 01:26:12 Msec=750 True Az=72.78 Ze=136.59 Az status=0009 Ze status=0009 01:26:12 Check angles 01:26:12 SkyScan query 01:26:13 SkyScan query done: ret=0 az=55.23<-3682 ze=115.695<-4287 Statuses=0009 0009 01:26:13 Msec=1500 True Az=55.23 Ze=115.695 Az status=0009 Ze status=0009 01:26:13 Check angles 01:26:13 SkyScan query 01:26:14 SkyScan query done: ret=0 az=40.86<-2724 ze=94.695<-5687 Statuses=0009 0009 01:26:14 Msec=2250 True Az=40.86 Ze=94.695 Az status=0009 Ze status=0009 01:26:14 Check angles 01:26:14 SkyScan query 01:26:14 SkyScan query done: ret=0 az=40.995<-2733 ze=73.305<-7113 Statuses=0008 0009 01:26:14 Msec=3000 True Az=40.995 Ze=73.305 Az status=0008 Ze status=0009 01:26:15 Check angles 01:26:15 SkyScan query 01:26:15 SkyScan query done: ret=0 az=40.995<-2733 ze=52.77<-8482 Statuses=0008 0009 01:26:15 Msec=3750 True Az=40.995 Ze=52.77 Az status=0008 Ze status=0009 01:26:15 Check angles 01:26:15 SkyScan query 01:26:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:26:16 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:26:16 Message to Master queued w/err=0: serial=48658 error=0 01:26:21 Received message from Master: op=Filter serial=48659 01:26:21 Color wheel filter change from 0 to 0 01:26:21 FLIGetFilterPos err=0 currentPosition=0 01:26:21 FLIGetStepsRemaining err=0 RemainingSteps=0 01:26:21 Filter is already there-color wheel unchanged 01:26:21 Received message from Master: op=Shutter serial=48660 01:26:21 Shutter LASER close 01:26:21 Received message from Camera: op=State serial=48662 01:26:21 GetSingleValue result=40 Value=cccccccc 01:26:21 SkyScan query 01:26:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:26:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:26:22 Parameters OK 01:26:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:26:22 Set A/D data flow result=40 01:26:22 Set A/D channel type result=40 01:26:22 Set A/D encoding result=40 01:26:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:26:22 Set channel filter=0.000000e+000 result=40 01:26:22 Config A/D Result=40 01:26:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:26:22 Get A/D filter: -9.255963e+061 result=40 01:26:22 Get A/D value=-858993460 result=40 01:26:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:26:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:26:22 Parameters OK 01:26:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:26:22 Set A/D data flow result=40 01:26:22 Set A/D channel type result=40 01:26:22 Set A/D encoding result=40 01:26:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:26:22 Set channel filter=0.000000e+000 result=40 01:26:22 Config A/D Result=40 01:26:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:26:22 Get A/D filter: -9.255963e+061 result=40 01:26:22 Get A/D value=-858993460 result=40 01:26:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:26:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:26:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:26:22 Aux= 01:26:22 Message to Camera, serial 48662 queued 01:26:59 Received message from Master: op=PointingHead serial=48675 01:26:59 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 01:26:59 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 01:26:59 Point started: ret=0 01:26:59 point_skyscan result=0 01:27:00 Check angles 01:27:00 SkyScan query 01:27:00 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 01:27:00 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 01:27:01 Check angles 01:27:01 SkyScan query 01:27:01 SkyScan query done: ret=0 az=81.99<-5466 ze=66.495<-7567 Statuses=0009 0008 01:27:01 Msec=750 True Az=81.99 Ze=66.495 Az status=0009 Ze status=0008 01:27:01 Check angles 01:27:01 SkyScan query 01:27:02 SkyScan query done: ret=0 az=99.63<-6642 ze=66.495<-7567 Statuses=0009 0008 01:27:02 Msec=1500 True Az=99.63 Ze=66.495 Az status=0009 Ze status=0008 01:27:02 Check angles 01:27:02 SkyScan query 01:27:03 SkyScan query done: ret=0 az=117.09<-7806 ze=66.495<-7567 Statuses=0009 0008 01:27:03 Msec=2250 True Az=117.09 Ze=66.495 Az status=0009 Ze status=0008 01:27:03 Check angles 01:27:03 SkyScan query 01:27:03 SkyScan query done: ret=0 az=134.55<-8970 ze=66.495<-7567 Statuses=0009 0008 01:27:03 Msec=3000 True Az=134.55 Ze=66.495 Az status=0009 Ze status=0008 01:27:04 Check angles 01:27:04 SkyScan query 01:27:04 SkyScan query done: ret=0 az=152.04<-10136 ze=66.495<-7567 Statuses=0009 0008 01:27:04 Msec=3750 True Az=152.04 Ze=66.495 Az status=0009 Ze status=0008 01:27:04 Check angles 01:27:04 SkyScan query 01:27:05 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:27:05 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 01:27:05 Message to Master queued w/err=0: serial=48675 error=0 01:27:10 Received message from Master: op=Filter serial=48676 01:27:10 Color wheel filter change from 0 to 0 01:27:10 FLIGetFilterPos err=0 currentPosition=0 01:27:10 FLIGetStepsRemaining err=0 RemainingSteps=0 01:27:10 Filter is already there-color wheel unchanged 01:27:10 Received message from Master: op=Shutter serial=48677 01:27:10 Shutter LASER close 01:27:10 Received message from Camera: op=State serial=48679 01:27:10 GetSingleValue result=40 Value=cccccccc 01:27:10 SkyScan query 01:27:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:27:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:27:11 Parameters OK 01:27:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:27:11 Set A/D data flow result=40 01:27:11 Set A/D channel type result=40 01:27:11 Set A/D encoding result=40 01:27:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:27:11 Set channel filter=0.000000e+000 result=40 01:27:11 Config A/D Result=40 01:27:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:27:11 Get A/D filter: -9.255963e+061 result=40 01:27:11 Get A/D value=-858993460 result=40 01:27:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:27:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:27:11 Parameters OK 01:27:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:27:11 Set A/D data flow result=40 01:27:11 Set A/D channel type result=40 01:27:11 Set A/D encoding result=40 01:27:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:27:11 Set channel filter=0.000000e+000 result=40 01:27:11 Config A/D Result=40 01:27:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:27:11 Get A/D filter: -9.255963e+061 result=40 01:27:11 Get A/D value=-858993460 result=40 01:27:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:27:11 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:27:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:27:11 Aux= 01:27:11 Message to Camera, serial 48679 queued 01:27:48 Received message from Master: op=PointingHead serial=48692 01:27:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:27:48 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:27:48 Point started: ret=0 01:27:48 point_skyscan result=0 01:27:49 Check angles 01:27:49 SkyScan query 01:27:49 SkyScan query done: ret=0 az=134.595<-8973 ze=36.42<-9572 Statuses=0009 0009 01:27:49 Msec=0 True Az=134.595 Ze=36.42 Az status=0009 Ze status=0009 01:27:49 Check angles 01:27:49 SkyScan query 01:27:50 SkyScan query done: ret=0 az=116.88<-7792 ze=15.03<-10998 Statuses=0009 0009 01:27:50 Msec=750 True Az=116.88 Ze=15.03 Az status=0009 Ze status=0009 01:27:50 Check angles 01:27:50 SkyScan query 01:27:51 SkyScan query done: ret=0 az=99.45<-6630 ze=-5.925<-12395 Statuses=0009 0009 01:27:51 Msec=1500 True Az=99.45 Ze=-5.925 Az status=0009 Ze status=0009 01:27:51 Check angles 01:27:51 SkyScan query 01:27:51 SkyScan query done: ret=0 az=81.675<-5445 ze=-27.42<-13828 Statuses=0009 0009 01:27:51 Msec=2250 True Az=81.675 Ze=-27.42 Az status=0009 Ze status=0009 01:27:52 Check angles 01:27:52 SkyScan query 01:27:52 SkyScan query done: ret=0 az=63.795<-4253 ze=-38.565<-14571 Statuses=0009 0008 01:27:52 Msec=3000 True Az=63.795 Ze=-38.565 Az status=0009 Ze status=0008 01:27:52 Check angles 01:27:52 SkyScan query 01:27:53 SkyScan query done: ret=0 az=46.02<-3068 ze=-38.52<-14568 Statuses=0009 0008 01:27:53 Msec=3750 True Az=46.02 Ze=-38.52 Az status=0009 Ze status=0008 01:27:53 Check angles 01:27:53 SkyScan query 01:27:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:27:54 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 01:27:54 Message to Master queued w/err=0: serial=48692 error=0 01:27:59 Received message from Master: op=Filter serial=48693 01:27:59 Color wheel filter change from 0 to 0 01:27:59 FLIGetFilterPos err=0 currentPosition=0 01:27:59 FLIGetStepsRemaining err=0 RemainingSteps=0 01:27:59 Filter is already there-color wheel unchanged 01:27:59 Received message from Master: op=Shutter serial=48694 01:27:59 Shutter LASER close 01:27:59 Received message from Camera: op=State serial=48696 01:27:59 GetSingleValue result=40 Value=cccccccc 01:27:59 SkyScan query 01:28:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:28:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:28:00 Parameters OK 01:28:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:28:00 Set A/D data flow result=40 01:28:00 Set A/D channel type result=40 01:28:00 Set A/D encoding result=40 01:28:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:28:00 Set channel filter=0.000000e+000 result=40 01:28:00 Config A/D Result=40 01:28:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:28:00 Get A/D filter: -9.255963e+061 result=40 01:28:00 Get A/D value=-858993460 result=40 01:28:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:28:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:28:00 Parameters OK 01:28:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:28:00 Set A/D data flow result=40 01:28:00 Set A/D channel type result=40 01:28:00 Set A/D encoding result=40 01:28:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:28:00 Set channel filter=0.000000e+000 result=40 01:28:00 Config A/D Result=40 01:28:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:28:00 Get A/D filter: -9.255963e+061 result=40 01:28:00 Get A/D value=-858993460 result=40 01:28:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:28:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:28:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:28:00 Aux= 01:28:00 Message to Camera, serial 48696 queued 01:28:36 Received message from Master: op=PointingHead serial=48709 01:28:36 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:28:36 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:28:37 Point started: ret=0 01:28:37 point_skyscan result=0 01:28:38 Check angles 01:28:38 SkyScan query 01:28:38 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.52<-16568 Statuses=0009 0009 01:28:38 Msec=0 True Az=64.23 Ze=-68.52 Az status=0009 Ze status=0009 01:28:38 Check angles 01:28:38 SkyScan query 01:28:39 SkyScan query done: ret=0 az=81.495<-5433 ze=-89.505<-17967 Statuses=0009 0009 01:28:39 Msec=750 True Az=81.495 Ze=-89.505 Az status=0009 Ze status=0009 01:28:39 Check angles 01:28:39 SkyScan query 01:28:40 SkyScan query done: ret=0 az=99.135<-6609 ze=-110.46<-19364 Statuses=0009 0009 01:28:40 Msec=1500 True Az=99.135 Ze=-110.46 Az status=0009 Ze status=0009 01:28:40 Check angles 01:28:40 SkyScan query 01:28:40 SkyScan query done: ret=0 az=116.715<-7781 ze=-131.355<-20757 Statuses=0009 0009 01:28:40 Msec=2250 True Az=116.715 Ze=-131.355 Az status=0009 Ze status=0009 01:28:41 Check angles 01:28:41 SkyScan query 01:28:41 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 01:28:41 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 01:28:41 Check angles 01:28:41 SkyScan query 01:28:42 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:28:42 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:28:42 Message to Master queued w/err=0: serial=48709 error=0 01:28:47 Received message from Master: op=Filter serial=48710 01:28:47 Color wheel filter change from 0 to 0 01:28:47 FLIGetFilterPos err=0 currentPosition=0 01:28:47 FLIGetStepsRemaining err=0 RemainingSteps=0 01:28:47 Filter is already there-color wheel unchanged 01:28:47 Received message from Master: op=Shutter serial=48711 01:28:47 Shutter LASER close 01:28:47 Received message from Camera: op=State serial=48713 01:28:47 GetSingleValue result=40 Value=cccccccc 01:28:47 SkyScan query 01:28:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:28:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:28:48 Parameters OK 01:28:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:28:48 Set A/D data flow result=40 01:28:48 Set A/D channel type result=40 01:28:48 Set A/D encoding result=40 01:28:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:28:48 Set channel filter=0.000000e+000 result=40 01:28:48 Config A/D Result=40 01:28:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:28:48 Get A/D filter: -9.255963e+061 result=40 01:28:48 Get A/D value=-858993460 result=40 01:28:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:28:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:28:48 Parameters OK 01:28:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:28:48 Set A/D data flow result=40 01:28:48 Set A/D channel type result=40 01:28:48 Set A/D encoding result=40 01:28:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:28:48 Set channel filter=0.000000e+000 result=40 01:28:48 Config A/D Result=40 01:28:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:28:48 Get A/D filter: -9.255963e+061 result=40 01:28:48 Get A/D value=-858993460 result=40 01:28:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:28:48 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:28:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:28:48 Aux= 01:28:48 Message to Camera, serial 48713 queued 01:29:24 Received message from Master: op=PointingHead serial=48726 01:29:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:29:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:29:25 Point started: ret=0 01:29:25 point_skyscan result=0 01:29:26 Check angles 01:29:26 SkyScan query 01:29:26 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.405<-23427 Statuses=0009 0009 01:29:26 Msec=0 True Az=113.01 Ze=-171.405 Az status=0009 Ze status=0009 01:29:26 Check angles 01:29:26 SkyScan query 01:29:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:29:27 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:29:27 Message to Master queued w/err=0: serial=48726 error=0 01:29:32 Received message from Master: op=Filter serial=48727 01:29:32 Color wheel filter change from 0 to 0 01:29:32 FLIGetFilterPos err=0 currentPosition=0 01:29:32 FLIGetStepsRemaining err=0 RemainingSteps=0 01:29:32 Filter is already there-color wheel unchanged 01:29:32 Received message from Master: op=Shutter serial=48728 01:29:32 Shutter LASER open 01:29:32 Received message from Camera: op=State serial=48730 01:29:32 GetSingleValue result=40 Value=cccccccc 01:29:32 SkyScan query 01:29:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:29:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:29:33 Parameters OK 01:29:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:29:33 Set A/D data flow result=40 01:29:33 Set A/D channel type result=40 01:29:33 Set A/D encoding result=40 01:29:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:29:33 Set channel filter=0.000000e+000 result=40 01:29:33 Config A/D Result=40 01:29:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:29:33 Get A/D filter: -9.255963e+061 result=40 01:29:33 Get A/D value=-858993460 result=40 01:29:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:29:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:29:33 Parameters OK 01:29:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:29:33 Set A/D data flow result=40 01:29:33 Set A/D channel type result=40 01:29:33 Set A/D encoding result=40 01:29:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:29:33 Set channel filter=0.000000e+000 result=40 01:29:33 Config A/D Result=40 01:29:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:29:33 Get A/D filter: -9.255963e+061 result=40 01:29:33 Get A/D value=-858993460 result=40 01:29:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:29:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:29:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:29:33 Aux= 01:29:33 Message to Camera, serial 48730 queued 01:29:41 Received message from Master: op=Shutter serial=48740 01:29:41 Shutter LASER close 01:29:42 Received message from Master: op=PointingHead serial=48744 01:29:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:29:42 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:29:42 Point started: ret=0 01:29:42 point_skyscan result=0 01:29:43 Check angles 01:29:43 SkyScan query 01:29:44 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.115<-21541 Statuses=0009 0009 01:29:44 Msec=0 True Az=136.02 Ze=-143.115 Az status=0009 Ze status=0009 01:29:44 Check angles 01:29:44 SkyScan query 01:29:44 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.145<-20143 Statuses=0009 0009 01:29:44 Msec=750 True Az=153.585 Ze=-122.145 Az status=0009 Ze status=0009 01:29:44 Check angles 01:29:44 SkyScan query 01:29:45 SkyScan query done: ret=0 az=171<-11400 ze=-101.265<-18751 Statuses=0009 0009 01:29:45 Msec=1500 True Az=171 Ze=-101.265 Az status=0009 Ze status=0009 01:29:45 Check angles 01:29:45 SkyScan query 01:29:46 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.28<-17352 Statuses=0008 0009 01:29:46 Msec=2250 True Az=176.025 Ze=-80.28 Az status=0008 Ze status=0009 01:29:46 Check angles 01:29:46 SkyScan query 01:29:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.325<-15955 Statuses=0008 0009 01:29:47 Msec=3000 True Az=175.995 Ze=-59.325 Az status=0008 Ze status=0009 01:29:47 Check angles 01:29:47 SkyScan query 01:29:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:29:47 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:29:47 Message to Master queued w/err=0: serial=48744 error=0 01:29:52 Received message from Master: op=Filter serial=48745 01:29:52 Color wheel filter change from 0 to 0 01:29:52 FLIGetFilterPos err=0 currentPosition=0 01:29:52 FLIGetStepsRemaining err=0 RemainingSteps=0 01:29:52 Filter is already there-color wheel unchanged 01:29:52 Received message from Master: op=Shutter serial=48746 01:29:52 Shutter LASER close 01:29:53 Received message from Camera: op=State serial=48748 01:29:53 GetSingleValue result=40 Value=cccccccc 01:29:53 SkyScan query 01:29:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:29:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:29:53 Parameters OK 01:29:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:29:53 Set A/D data flow result=40 01:29:53 Set A/D channel type result=40 01:29:53 Set A/D encoding result=40 01:29:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:29:53 Set channel filter=0.000000e+000 result=40 01:29:53 Config A/D Result=40 01:29:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:29:53 Get A/D filter: -9.255963e+061 result=40 01:29:53 Get A/D value=-858993460 result=40 01:29:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:29:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:29:53 Parameters OK 01:29:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:29:53 Set A/D data flow result=40 01:29:53 Set A/D channel type result=40 01:29:53 Set A/D encoding result=40 01:29:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:29:53 Set channel filter=0.000000e+000 result=40 01:29:53 Config A/D Result=40 01:29:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:29:53 Get A/D filter: -9.255963e+061 result=40 01:29:53 Get A/D value=-858993460 result=40 01:29:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:29:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:29:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:29:53 Aux= 01:29:53 Message to Camera, serial 48748 queued 01:30:30 Received message from Master: op=PointingHead serial=48761 01:30:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:30:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:30:30 Point started: ret=0 01:30:30 point_skyscan result=0 01:30:31 Check angles 01:30:31 SkyScan query 01:30:32 SkyScan query done: ret=0 az=152.61<-10174 ze=-21.435<-13429 Statuses=0009 0009 01:30:32 Msec=0 True Az=152.61 Ze=-21.435 Az status=0009 Ze status=0009 01:30:32 Check angles 01:30:32 SkyScan query 01:30:32 SkyScan query done: ret=0 az=134.715<-8981 ze=-0<-12000 Statuses=0009 0009 01:30:32 Msec=750 True Az=134.715 Ze=-0 Az status=0009 Ze status=0009 01:30:33 Check angles 01:30:33 SkyScan query 01:30:33 SkyScan query done: ret=0 az=117.09<-7806 ze=20.94<-10604 Statuses=0009 0009 01:30:33 Msec=1500 True Az=117.09 Ze=20.94 Az status=0009 Ze status=0009 01:30:33 Check angles 01:30:33 SkyScan query 01:30:34 SkyScan query done: ret=0 az=99.57<-6638 ze=42.285<-9181 Statuses=0009 0009 01:30:34 Msec=2250 True Az=99.57 Ze=42.285 Az status=0009 Ze status=0009 01:30:34 Check angles 01:30:34 SkyScan query 01:30:35 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 01:30:35 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 01:30:35 Check angles 01:30:35 SkyScan query 01:30:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:30:36 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:30:36 Message to Master queued w/err=0: serial=48761 error=0 01:30:41 Received message from Master: op=Filter serial=48762 01:30:41 Color wheel filter change from 0 to 0 01:30:41 FLIGetFilterPos err=0 currentPosition=0 01:30:41 FLIGetStepsRemaining err=0 RemainingSteps=0 01:30:41 Filter is already there-color wheel unchanged 01:30:41 Received message from Master: op=Shutter serial=48763 01:30:41 Shutter LASER close 01:30:41 Received message from Camera: op=State serial=48765 01:30:41 GetSingleValue result=40 Value=cccccccc 01:30:41 SkyScan query 01:30:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:30:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:30:41 Parameters OK 01:30:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:30:41 Set A/D data flow result=40 01:30:41 Set A/D channel type result=40 01:30:41 Set A/D encoding result=40 01:30:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:30:41 Set channel filter=0.000000e+000 result=40 01:30:41 Config A/D Result=40 01:30:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:30:41 Get A/D filter: -9.255963e+061 result=40 01:30:41 Get A/D value=-858993460 result=40 01:30:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:30:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:30:41 Parameters OK 01:30:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:30:41 Set A/D data flow result=40 01:30:41 Set A/D channel type result=40 01:30:41 Set A/D encoding result=40 01:30:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:30:41 Set channel filter=0.000000e+000 result=40 01:30:41 Config A/D Result=40 01:30:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:30:41 Get A/D filter: -9.255963e+061 result=40 01:30:41 Get A/D value=-858993460 result=40 01:30:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:30:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:30:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:30:41 Aux= 01:30:41 Message to Camera, serial 48765 queued 01:31:18 Received message from Master: op=PointingHead serial=48778 01:31:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:31:18 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:31:19 Point started: ret=0 01:31:19 point_skyscan result=0 01:31:19 Check angles 01:31:19 SkyScan query 01:31:20 SkyScan query done: ret=0 az=109.065<-7271 ze=38.49<-9434 Statuses=0009 0008 01:31:20 Msec=0 True Az=109.065 Ze=38.49 Az status=0009 Ze status=0008 01:31:20 Check angles 01:31:20 SkyScan query 01:31:21 SkyScan query done: ret=0 az=126.9<-8460 ze=38.505<-9433 Statuses=0009 0008 01:31:21 Msec=750 True Az=126.9 Ze=38.505 Az status=0009 Ze status=0008 01:31:21 Check angles 01:31:21 SkyScan query 01:31:21 SkyScan query done: ret=0 az=144.345<-9623 ze=38.505<-9433 Statuses=0009 0008 01:31:21 Msec=1500 True Az=144.345 Ze=38.505 Az status=0009 Ze status=0008 01:31:22 Check angles 01:31:22 SkyScan query 01:31:22 SkyScan query done: ret=0 az=161.76<-10784 ze=38.505<-9433 Statuses=0009 0008 01:31:22 Msec=2250 True Az=161.76 Ze=38.505 Az status=0009 Ze status=0008 01:31:22 Check angles 01:31:22 SkyScan query 01:31:23 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:31:23 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:31:23 Check angles 01:31:23 SkyScan query 01:31:24 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:31:24 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:31:24 Message to Master queued w/err=0: serial=48778 error=0 01:31:29 Received message from Master: op=Filter serial=48779 01:31:29 Color wheel filter change from 0 to 0 01:31:29 FLIGetFilterPos err=0 currentPosition=0 01:31:29 FLIGetStepsRemaining err=0 RemainingSteps=0 01:31:29 Filter is already there-color wheel unchanged 01:31:29 Received message from Master: op=Shutter serial=48780 01:31:29 Shutter LASER close 01:31:29 Received message from Camera: op=State serial=48782 01:31:29 GetSingleValue result=40 Value=cccccccc 01:31:29 SkyScan query 01:31:30 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:31:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:31:30 Parameters OK 01:31:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:31:30 Set A/D data flow result=40 01:31:30 Set A/D channel type result=40 01:31:30 Set A/D encoding result=40 01:31:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:31:30 Set channel filter=0.000000e+000 result=40 01:31:30 Config A/D Result=40 01:31:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:31:30 Get A/D filter: -9.255963e+061 result=40 01:31:30 Get A/D value=-858993460 result=40 01:31:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:31:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:31:30 Parameters OK 01:31:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:31:30 Set A/D data flow result=40 01:31:30 Set A/D channel type result=40 01:31:30 Set A/D encoding result=40 01:31:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:31:30 Set channel filter=0.000000e+000 result=40 01:31:30 Config A/D Result=40 01:31:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:31:30 Get A/D filter: -9.255963e+061 result=40 01:31:30 Get A/D value=-858993460 result=40 01:31:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:31:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:31:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:31:30 Aux= 01:31:30 Message to Camera, serial 48782 queued 01:32:06 Received message from Master: op=PointingHead serial=48795 01:32:06 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:32:06 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:32:07 Point started: ret=0 01:32:07 point_skyscan result=0 01:32:07 Check angles 01:32:07 SkyScan query 01:32:08 SkyScan query done: ret=0 az=153.24<-10216 ze=8.97<-11402 Statuses=0009 0009 01:32:08 Msec=0 True Az=153.24 Ze=8.97 Az status=0009 Ze status=0009 01:32:08 Check angles 01:32:08 SkyScan query 01:32:09 SkyScan query done: ret=0 az=135.795<-9053 ze=-12.015<-12801 Statuses=0009 0009 01:32:09 Msec=750 True Az=135.795 Ze=-12.015 Az status=0009 Ze status=0009 01:32:09 Check angles 01:32:09 SkyScan query 01:32:10 SkyScan query done: ret=0 az=118.26<-7884 ze=-32.91<-14194 Statuses=0009 0009 01:32:10 Msec=1500 True Az=118.26 Ze=-32.91 Az status=0009 Ze status=0009 01:32:10 Check angles 01:32:10 SkyScan query 01:32:10 SkyScan query done: ret=0 az=100.785<-6719 ze=-51.495<-15433 Statuses=0009 0009 01:32:10 Msec=2250 True Az=100.785 Ze=-51.495 Az status=0009 Ze status=0009 01:32:10 Check angles 01:32:10 SkyScan query 01:32:11 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 01:32:11 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 01:32:11 Check angles 01:32:11 SkyScan query 01:32:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:32:12 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:32:12 Message to Master queued w/err=0: serial=48795 error=0 01:32:17 Received message from Master: op=Filter serial=48796 01:32:17 Color wheel filter change from 0 to 0 01:32:17 FLIGetFilterPos err=0 currentPosition=0 01:32:17 FLIGetStepsRemaining err=0 RemainingSteps=0 01:32:17 Filter is already there-color wheel unchanged 01:32:17 Received message from Master: op=Shutter serial=48797 01:32:17 Shutter LASER close 01:32:17 Received message from Camera: op=State serial=48799 01:32:17 GetSingleValue result=40 Value=cccccccc 01:32:17 SkyScan query 01:32:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:32:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:32:18 Parameters OK 01:32:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:32:18 Set A/D data flow result=40 01:32:18 Set A/D channel type result=40 01:32:18 Set A/D encoding result=40 01:32:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:32:18 Set channel filter=0.000000e+000 result=40 01:32:18 Config A/D Result=40 01:32:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:32:18 Get A/D filter: -9.255963e+061 result=40 01:32:18 Get A/D value=-858993460 result=40 01:32:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:32:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:32:18 Parameters OK 01:32:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:32:18 Set A/D data flow result=40 01:32:18 Set A/D channel type result=40 01:32:18 Set A/D encoding result=40 01:32:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:32:18 Set channel filter=0.000000e+000 result=40 01:32:18 Config A/D Result=40 01:32:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:32:18 Get A/D filter: -9.255963e+061 result=40 01:32:18 Get A/D value=-858993460 result=40 01:32:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:32:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:32:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:32:18 Aux= 01:32:18 Message to Camera, serial 48799 queued 01:32:54 Received message from Master: op=PointingHead serial=48812 01:32:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:32:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:32:55 Point started: ret=0 01:32:55 point_skyscan result=0 01:32:56 Check angles 01:32:56 SkyScan query 01:32:56 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.21<-17414 Statuses=0009 0009 01:32:56 Msec=0 True Az=108.915 Ze=-81.21 Az status=0009 Ze status=0009 01:32:56 Check angles 01:32:56 SkyScan query 01:32:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.735<-18849 Statuses=0008 0009 01:32:57 Msec=750 True Az=112.995 Ze=-102.735 Az status=0008 Ze status=0009 01:32:57 Check angles 01:32:57 SkyScan query 01:32:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.035<-20269 Statuses=0008 0009 01:32:58 Msec=1500 True Az=112.995 Ze=-124.035 Az status=0008 Ze status=0009 01:32:58 Check angles 01:32:58 SkyScan query 01:32:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.96<-21664 Statuses=0008 0009 01:32:58 Msec=2250 True Az=112.995 Ze=-144.96 Az status=0008 Ze status=0009 01:32:59 Check angles 01:32:59 SkyScan query 01:32:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.915<-23061 Statuses=0008 0009 01:32:59 Msec=3000 True Az=112.995 Ze=-165.915 Az status=0008 Ze status=0009 01:32:59 Check angles 01:32:59 SkyScan query 01:33:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:33:00 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:33:00 Message to Master queued w/err=0: serial=48812 error=0 01:33:05 Received message from Master: op=Filter serial=48813 01:33:05 Color wheel filter change from 0 to 0 01:33:05 FLIGetFilterPos err=0 currentPosition=0 01:33:05 FLIGetStepsRemaining err=0 RemainingSteps=0 01:33:05 Filter is already there-color wheel unchanged 01:33:05 Received message from Master: op=Shutter serial=48814 01:33:05 Shutter LASER open 01:33:05 Received message from Camera: op=State serial=48816 01:33:05 GetSingleValue result=40 Value=cccccccc 01:33:05 SkyScan query 01:33:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:33:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:33:06 Parameters OK 01:33:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:33:06 Set A/D data flow result=40 01:33:06 Set A/D channel type result=40 01:33:06 Set A/D encoding result=40 01:33:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:33:06 Set channel filter=0.000000e+000 result=40 01:33:06 Config A/D Result=40 01:33:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:33:06 Get A/D filter: -9.255963e+061 result=40 01:33:06 Get A/D value=-858993460 result=40 01:33:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:33:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:33:06 Parameters OK 01:33:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:33:06 Set A/D data flow result=40 01:33:06 Set A/D channel type result=40 01:33:06 Set A/D encoding result=40 01:33:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:33:06 Set channel filter=0.000000e+000 result=40 01:33:06 Config A/D Result=40 01:33:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:33:06 Get A/D filter: -9.255963e+061 result=40 01:33:06 Get A/D value=-858993460 result=40 01:33:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:33:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:33:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:33:06 Aux= 01:33:06 Message to Camera, serial 48816 queued 01:33:13 Received message from Master: op=Shutter serial=48825 01:33:13 Shutter LASER close 01:33:14 Received message from Master: op=PointingHead serial=48829 01:33:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:33:14 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:33:14 Point started: ret=0 01:33:14 point_skyscan result=0 01:33:15 Check angles 01:33:15 SkyScan query 01:33:15 SkyScan query done: ret=0 az=90.195<-6013 ze=157.59<-1494 Statuses=0009 0009 01:33:15 Msec=0 True Az=90.195 Ze=157.59 Az status=0009 Ze status=0009 01:33:16 Check angles 01:33:16 SkyScan query 01:33:16 SkyScan query done: ret=0 az=72.75<-4850 ze=136.575<-2895 Statuses=0009 0009 01:33:16 Msec=750 True Az=72.75 Ze=136.575 Az status=0009 Ze status=0009 01:33:16 Check angles 01:33:16 SkyScan query 01:33:17 SkyScan query done: ret=0 az=55.275<-3685 ze=115.68<-4288 Statuses=0009 0009 01:33:17 Msec=1500 True Az=55.275 Ze=115.68 Az status=0009 Ze status=0009 01:33:17 Check angles 01:33:17 SkyScan query 01:33:18 SkyScan query done: ret=0 az=40.86<-2724 ze=94.695<-5687 Statuses=0009 0009 01:33:18 Msec=2250 True Az=40.86 Ze=94.695 Az status=0009 Ze status=0009 01:33:18 Check angles 01:33:18 SkyScan query 01:33:18 SkyScan query done: ret=0 az=40.995<-2733 ze=73.785<-7081 Statuses=0008 0009 01:33:18 Msec=3000 True Az=40.995 Ze=73.785 Az status=0008 Ze status=0009 01:33:19 Check angles 01:33:19 SkyScan query 01:33:19 SkyScan query done: ret=0 az=40.995<-2733 ze=53.07<-8462 Statuses=0008 0009 01:33:19 Msec=3750 True Az=40.995 Ze=53.07 Az status=0008 Ze status=0009 01:33:19 Check angles 01:33:19 SkyScan query 01:33:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:33:20 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:33:20 Message to Master queued w/err=0: serial=48829 error=0 01:33:25 Received message from Master: op=Filter serial=48830 01:33:25 Color wheel filter change from 0 to 0 01:33:25 FLIGetFilterPos err=0 currentPosition=0 01:33:25 FLIGetStepsRemaining err=0 RemainingSteps=0 01:33:25 Filter is already there-color wheel unchanged 01:33:25 Received message from Master: op=Shutter serial=48831 01:33:25 Shutter LASER close 01:33:25 Received message from Camera: op=State serial=48833 01:33:25 GetSingleValue result=40 Value=cccccccc 01:33:25 SkyScan query 01:33:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:33:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:33:26 Parameters OK 01:33:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:33:26 Set A/D data flow result=40 01:33:26 Set A/D channel type result=40 01:33:26 Set A/D encoding result=40 01:33:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:33:26 Set channel filter=0.000000e+000 result=40 01:33:26 Config A/D Result=40 01:33:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:33:26 Get A/D filter: -9.255963e+061 result=40 01:33:26 Get A/D value=-858993460 result=40 01:33:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:33:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:33:26 Parameters OK 01:33:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:33:26 Set A/D data flow result=40 01:33:26 Set A/D channel type result=40 01:33:26 Set A/D encoding result=40 01:33:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:33:26 Set channel filter=0.000000e+000 result=40 01:33:26 Config A/D Result=40 01:33:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:33:26 Get A/D filter: -9.255963e+061 result=40 01:33:26 Get A/D value=-858993460 result=40 01:33:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:33:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:33:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:33:26 Aux= 01:33:26 Message to Camera, serial 48833 queued 01:34:03 Received message from Master: op=PointingHead serial=48846 01:34:03 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 01:34:03 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 01:34:03 Point started: ret=0 01:34:03 point_skyscan result=0 01:34:04 Check angles 01:34:04 SkyScan query 01:34:04 SkyScan query done: ret=0 az=64.26<-4284 ze=66.54<-7564 Statuses=0009 0008 01:34:04 Msec=0 True Az=64.26 Ze=66.54 Az status=0009 Ze status=0008 01:34:05 Check angles 01:34:05 SkyScan query 01:34:05 SkyScan query done: ret=0 az=81.75<-5450 ze=66.495<-7567 Statuses=0009 0008 01:34:05 Msec=750 True Az=81.75 Ze=66.495 Az status=0009 Ze status=0008 01:34:05 Check angles 01:34:05 SkyScan query 01:34:06 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 01:34:06 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 01:34:06 Check angles 01:34:06 SkyScan query 01:34:07 SkyScan query done: ret=0 az=116.7<-7780 ze=66.495<-7567 Statuses=0009 0008 01:34:07 Msec=2250 True Az=116.7 Ze=66.495 Az status=0009 Ze status=0008 01:34:07 Check angles 01:34:07 SkyScan query 01:34:07 SkyScan query done: ret=0 az=134.235<-8949 ze=66.495<-7567 Statuses=0009 0008 01:34:07 Msec=3000 True Az=134.235 Ze=66.495 Az status=0009 Ze status=0008 01:34:08 Check angles 01:34:08 SkyScan query 01:34:08 SkyScan query done: ret=0 az=151.62<-10108 ze=66.495<-7567 Statuses=0009 0008 01:34:08 Msec=3750 True Az=151.62 Ze=66.495 Az status=0009 Ze status=0008 01:34:08 Check angles 01:34:08 SkyScan query 01:34:09 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 01:34:09 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 01:34:09 Message to Master queued w/err=0: serial=48846 error=0 01:34:14 Received message from Master: op=Filter serial=48847 01:34:14 Color wheel filter change from 0 to 0 01:34:14 FLIGetFilterPos err=0 currentPosition=0 01:34:14 FLIGetStepsRemaining err=0 RemainingSteps=0 01:34:14 Filter is already there-color wheel unchanged 01:34:14 Received message from Master: op=Shutter serial=48848 01:34:14 Shutter LASER close 01:34:14 Received message from Camera: op=State serial=48850 01:34:14 GetSingleValue result=40 Value=cccccccc 01:34:14 SkyScan query 01:34:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:34:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:34:15 Parameters OK 01:34:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:34:15 Set A/D data flow result=40 01:34:15 Set A/D channel type result=40 01:34:15 Set A/D encoding result=40 01:34:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:34:15 Set channel filter=0.000000e+000 result=40 01:34:15 Config A/D Result=40 01:34:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:34:15 Get A/D filter: -9.255963e+061 result=40 01:34:15 Get A/D value=-858993460 result=40 01:34:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:34:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:34:15 Parameters OK 01:34:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:34:15 Set A/D data flow result=40 01:34:15 Set A/D channel type result=40 01:34:15 Set A/D encoding result=40 01:34:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:34:15 Set channel filter=0.000000e+000 result=40 01:34:15 Config A/D Result=40 01:34:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:34:15 Get A/D filter: -9.255963e+061 result=40 01:34:15 Get A/D value=-858993460 result=40 01:34:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:34:15 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:34:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:34:15 Aux= 01:34:15 Message to Camera, serial 48850 queued 01:34:52 Received message from Master: op=PointingHead serial=48863 01:34:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:34:52 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:34:52 Point started: ret=0 01:34:52 point_skyscan result=0 01:34:53 Check angles 01:34:53 SkyScan query 01:34:53 SkyScan query done: ret=0 az=134.61<-8974 ze=36.33<-9578 Statuses=0009 0009 01:34:53 Msec=0 True Az=134.61 Ze=36.33 Az status=0009 Ze status=0009 01:34:53 Check angles 01:34:53 SkyScan query 01:34:54 SkyScan query done: ret=0 az=116.82<-7788 ze=14.895<-11007 Statuses=0009 0009 01:34:54 Msec=750 True Az=116.82 Ze=14.895 Az status=0009 Ze status=0009 01:34:54 Check angles 01:34:54 SkyScan query 01:34:55 SkyScan query done: ret=0 az=99.405<-6627 ze=-6.03<-12402 Statuses=0009 0009 01:34:55 Msec=1500 True Az=99.405 Ze=-6.03 Az status=0009 Ze status=0009 01:34:55 Check angles 01:34:55 SkyScan query 01:34:55 SkyScan query done: ret=0 az=81.96<-5464 ze=-27.03<-13802 Statuses=0009 0009 01:34:55 Msec=2250 True Az=81.96 Ze=-27.03 Az status=0009 Ze status=0009 01:34:56 Check angles 01:34:56 SkyScan query 01:34:56 SkyScan query done: ret=0 az=64.425<-4295 ze=-38.565<-14571 Statuses=0009 0008 01:34:56 Msec=3000 True Az=64.425 Ze=-38.565 Az status=0009 Ze status=0008 01:34:56 Check angles 01:34:56 SkyScan query 01:34:57 SkyScan query done: ret=0 az=46.98<-3132 ze=-38.535<-14569 Statuses=0009 0008 01:34:57 Msec=3750 True Az=46.98 Ze=-38.535 Az status=0009 Ze status=0008 01:34:57 Check angles 01:34:57 SkyScan query 01:34:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:34:58 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 01:34:58 Message to Master queued w/err=0: serial=48863 error=0 01:35:03 Received message from Master: op=Filter serial=48864 01:35:03 Color wheel filter change from 0 to 0 01:35:03 FLIGetFilterPos err=0 currentPosition=0 01:35:03 FLIGetStepsRemaining err=0 RemainingSteps=0 01:35:03 Filter is already there-color wheel unchanged 01:35:03 Received message from Master: op=Shutter serial=48865 01:35:03 Shutter LASER close 01:35:03 Received message from Camera: op=State serial=48867 01:35:03 GetSingleValue result=40 Value=cccccccc 01:35:03 SkyScan query 01:35:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:35:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:35:04 Parameters OK 01:35:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:35:04 Set A/D data flow result=40 01:35:04 Set A/D channel type result=40 01:35:04 Set A/D encoding result=40 01:35:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:35:04 Set channel filter=0.000000e+000 result=40 01:35:04 Config A/D Result=40 01:35:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:35:04 Get A/D filter: -9.255963e+061 result=40 01:35:04 Get A/D value=-858993460 result=40 01:35:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:35:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:35:04 Parameters OK 01:35:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:35:04 Set A/D data flow result=40 01:35:04 Set A/D channel type result=40 01:35:04 Set A/D encoding result=40 01:35:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:35:04 Set channel filter=0.000000e+000 result=40 01:35:04 Config A/D Result=40 01:35:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:35:04 Get A/D filter: -9.255963e+061 result=40 01:35:04 Get A/D value=-858993460 result=40 01:35:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:35:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:35:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:35:04 Aux= 01:35:04 Message to Camera, serial 48867 queued 01:35:40 Received message from Master: op=PointingHead serial=48880 01:35:40 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:35:40 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:35:41 Point started: ret=0 01:35:41 point_skyscan result=0 01:35:41 Check angles 01:35:41 SkyScan query 01:35:42 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.295<-16553 Statuses=0009 0009 01:35:42 Msec=0 True Az=63.945 Ze=-68.295 Az status=0009 Ze status=0009 01:35:42 Check angles 01:35:42 SkyScan query 01:35:43 SkyScan query done: ret=0 az=81.495<-5433 ze=-89.295<-17953 Statuses=0009 0009 01:35:43 Msec=750 True Az=81.495 Ze=-89.295 Az status=0009 Ze status=0009 01:35:43 Check angles 01:35:43 SkyScan query 01:35:44 SkyScan query done: ret=0 az=99.045<-6603 ze=-110.235<-19349 Statuses=0009 0009 01:35:44 Msec=1500 True Az=99.045 Ze=-110.235 Az status=0009 Ze status=0009 01:35:44 Check angles 01:35:44 SkyScan query 01:35:44 SkyScan query done: ret=0 az=116.49<-7766 ze=-131.19<-20746 Statuses=0009 0009 01:35:44 Msec=2250 True Az=116.49 Ze=-131.19 Az status=0009 Ze status=0009 01:35:44 Check angles [UTC 2018-12-11 01:35:44] 01:35:44 SkyScan query 01:35:45 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 01:35:45 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 01:35:45 Check angles 01:35:45 SkyScan query 01:35:46 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 01:35:46 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 01:35:46 Message to Master queued w/err=0: serial=48880 error=0 01:35:51 Received message from Master: op=Filter serial=48881 01:35:51 Color wheel filter change from 0 to 0 01:35:51 FLIGetFilterPos err=0 currentPosition=0 01:35:51 FLIGetStepsRemaining err=0 RemainingSteps=0 01:35:51 Filter is already there-color wheel unchanged 01:35:51 Received message from Master: op=Shutter serial=48882 01:35:51 Shutter LASER close 01:35:51 Received message from Camera: op=State serial=48884 01:35:51 GetSingleValue result=40 Value=cccccccc 01:35:51 SkyScan query 01:35:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:35:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:35:52 Parameters OK 01:35:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:35:52 Set A/D data flow result=40 01:35:52 Set A/D channel type result=40 01:35:52 Set A/D encoding result=40 01:35:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:35:52 Set channel filter=0.000000e+000 result=40 01:35:52 Config A/D Result=40 01:35:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:35:52 Get A/D filter: -9.255963e+061 result=40 01:35:52 Get A/D value=-858993460 result=40 01:35:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:35:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:35:52 Parameters OK 01:35:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:35:52 Set A/D data flow result=40 01:35:52 Set A/D channel type result=40 01:35:52 Set A/D encoding result=40 01:35:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:35:52 Set channel filter=0.000000e+000 result=40 01:35:52 Config A/D Result=40 01:35:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:35:52 Get A/D filter: -9.255963e+061 result=40 01:35:52 Get A/D value=-858993460 result=40 01:35:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:35:52 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:35:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:35:52 Aux= 01:35:52 Message to Camera, serial 48884 queued [UTC 2018-12-11 01:35:54] 01:36:28 Received message from Master: op=PointingHead serial=48897 01:36:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:36:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:36:29 Point started: ret=0 01:36:29 point_skyscan result=0 01:36:30 Check angles 01:36:30 SkyScan query 01:36:30 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 01:36:30 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 01:36:30 Check angles 01:36:30 SkyScan query 01:36:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:36:31 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:36:31 Message to Master queued w/err=0: serial=48897 error=0 01:36:36 Received message from Master: op=Filter serial=48898 01:36:36 Color wheel filter change from 0 to 0 01:36:36 FLIGetFilterPos err=0 currentPosition=0 01:36:36 FLIGetStepsRemaining err=0 RemainingSteps=0 01:36:36 Filter is already there-color wheel unchanged 01:36:36 Received message from Master: op=Shutter serial=48899 01:36:36 Shutter LASER open 01:36:36 Received message from Camera: op=State serial=48901 01:36:36 GetSingleValue result=40 Value=cccccccc 01:36:36 SkyScan query 01:36:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:36:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:36:37 Parameters OK 01:36:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:36:37 Set A/D data flow result=40 01:36:37 Set A/D channel type result=40 01:36:37 Set A/D encoding result=40 01:36:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:36:37 Set channel filter=0.000000e+000 result=40 01:36:37 Config A/D Result=40 01:36:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:36:37 Get A/D filter: -9.255963e+061 result=40 01:36:37 Get A/D value=-858993460 result=40 01:36:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:36:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:36:37 Parameters OK 01:36:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:36:37 Set A/D data flow result=40 01:36:37 Set A/D channel type result=40 01:36:37 Set A/D encoding result=40 01:36:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:36:37 Set channel filter=0.000000e+000 result=40 01:36:37 Config A/D Result=40 01:36:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:36:37 Get A/D filter: -9.255963e+061 result=40 01:36:37 Get A/D value=-858993460 result=40 01:36:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:36:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:36:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:36:37 Aux= 01:36:37 Message to Camera, serial 48901 queued 01:36:45 Received message from Master: op=Shutter serial=48911 01:36:45 Shutter LASER close 01:36:46 Received message from Master: op=PointingHead serial=48915 01:36:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:36:46 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:36:46 Point started: ret=0 01:36:46 point_skyscan result=0 01:36:47 Check angles 01:36:47 SkyScan query 01:36:48 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.4<-21560 Statuses=0009 0009 01:36:48 Msec=0 True Az=135.765 Ze=-143.4 Az status=0009 Ze status=0009 01:36:48 Check angles 01:36:48 SkyScan query 01:36:48 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.43<-20162 Statuses=0009 0009 01:36:48 Msec=750 True Az=153.36 Ze=-122.43 Az status=0009 Ze status=0009 01:36:48 Check angles 01:36:48 SkyScan query 01:36:49 SkyScan query done: ret=0 az=171.225<-11415 ze=-101.055<-18737 Statuses=0009 0009 01:36:49 Msec=1500 True Az=171.225 Ze=-101.055 Az status=0009 Ze status=0009 01:36:49 Check angles 01:36:49 SkyScan query 01:36:50 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.115<-17341 Statuses=0008 0009 01:36:50 Msec=2250 True Az=176.025 Ze=-80.115 Az status=0008 Ze status=0009 01:36:50 Check angles 01:36:50 SkyScan query 01:36:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.13<-15942 Statuses=0008 0009 01:36:51 Msec=3000 True Az=176.01 Ze=-59.13 Az status=0008 Ze status=0009 01:36:51 Check angles 01:36:51 SkyScan query 01:36:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:36:51 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:36:51 Message to Master queued w/err=0: serial=48915 error=0 01:36:56 Received message from Master: op=Filter serial=48916 01:36:56 Color wheel filter change from 0 to 0 01:36:56 FLIGetFilterPos err=0 currentPosition=0 01:36:56 FLIGetStepsRemaining err=0 RemainingSteps=0 01:36:56 Filter is already there-color wheel unchanged 01:36:56 Received message from Master: op=Shutter serial=48917 01:36:56 Shutter LASER close 01:36:57 Received message from Camera: op=State serial=48919 01:36:57 GetSingleValue result=40 Value=cccccccc 01:36:57 SkyScan query 01:36:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:36:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:36:57 Parameters OK 01:36:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:36:57 Set A/D data flow result=40 01:36:57 Set A/D channel type result=40 01:36:57 Set A/D encoding result=40 01:36:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:36:57 Set channel filter=0.000000e+000 result=40 01:36:57 Config A/D Result=40 01:36:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:36:57 Get A/D filter: -9.255963e+061 result=40 01:36:57 Get A/D value=-858993460 result=40 01:36:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:36:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:36:57 Parameters OK 01:36:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:36:57 Set A/D data flow result=40 01:36:57 Set A/D channel type result=40 01:36:57 Set A/D encoding result=40 01:36:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:36:57 Set channel filter=0.000000e+000 result=40 01:36:57 Config A/D Result=40 01:36:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:36:57 Get A/D filter: -9.255963e+061 result=40 01:36:57 Get A/D value=-858993460 result=40 01:36:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:36:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:36:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:36:57 Aux= 01:36:57 Message to Camera, serial 48919 queued 01:37:34 Received message from Master: op=PointingHead serial=48932 01:37:34 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:37:34 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:37:34 Point started: ret=0 01:37:34 point_skyscan result=0 01:37:35 Check angles 01:37:35 SkyScan query 01:37:36 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.72<-13448 Statuses=0009 0009 01:37:36 Msec=0 True Az=152.925 Ze=-21.72 Az status=0009 Ze status=0009 01:37:36 Check angles 01:37:36 SkyScan query 01:37:36 SkyScan query done: ret=0 az=135.495<-9033 ze=-0.735<-12049 Statuses=0009 0009 01:37:36 Msec=750 True Az=135.495 Ze=-0.735 Az status=0009 Ze status=0009 01:37:37 Check angles 01:37:37 SkyScan query 01:37:37 SkyScan query done: ret=0 az=117.93<-7862 ze=20.19<-10654 Statuses=0009 0009 01:37:37 Msec=1500 True Az=117.93 Ze=20.19 Az status=0009 Ze status=0009 01:37:37 Check angles 01:37:37 SkyScan query 01:37:38 SkyScan query done: ret=0 az=100.44<-6696 ze=41.19<-9254 Statuses=0009 0009 01:37:38 Msec=2250 True Az=100.44 Ze=41.19 Az status=0009 Ze status=0009 01:37:38 Check angles 01:37:38 SkyScan query 01:37:39 SkyScan query done: ret=0 az=86.055<-5737 ze=51.57<-8562 Statuses=0009 0008 01:37:39 Msec=3000 True Az=86.055 Ze=51.57 Az status=0009 Ze status=0008 01:37:39 Check angles 01:37:39 SkyScan query 01:37:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:37:39 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:37:39 Message to Master queued w/err=0: serial=48932 error=0 01:37:44 Received message from Master: op=Filter serial=48933 01:37:44 Color wheel filter change from 0 to 0 01:37:44 FLIGetFilterPos err=0 currentPosition=0 01:37:44 FLIGetStepsRemaining err=0 RemainingSteps=0 01:37:44 Filter is already there-color wheel unchanged 01:37:45 Received message from Master: op=Shutter serial=48934 01:37:45 Shutter LASER close 01:37:45 Received message from Camera: op=State serial=48936 01:37:45 GetSingleValue result=40 Value=cccccccc 01:37:45 SkyScan query 01:37:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:37:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:37:45 Parameters OK 01:37:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:37:45 Set A/D data flow result=40 01:37:45 Set A/D channel type result=40 01:37:45 Set A/D encoding result=40 01:37:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:37:45 Set channel filter=0.000000e+000 result=40 01:37:45 Config A/D Result=40 01:37:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:37:45 Get A/D filter: -9.255963e+061 result=40 01:37:45 Get A/D value=-858993460 result=40 01:37:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:37:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:37:45 Parameters OK 01:37:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:37:45 Set A/D data flow result=40 01:37:45 Set A/D channel type result=40 01:37:45 Set A/D encoding result=40 01:37:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:37:45 Set channel filter=0.000000e+000 result=40 01:37:45 Config A/D Result=40 01:37:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:37:45 Get A/D filter: -9.255963e+061 result=40 01:37:45 Get A/D value=-858993460 result=40 01:37:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:37:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:37:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:37:45 Aux= 01:37:45 Message to Camera, serial 48936 queued 01:38:22 Received message from Master: op=PointingHead serial=48949 01:38:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:38:22 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:38:22 Point started: ret=0 01:38:22 point_skyscan result=0 01:38:23 Check angles 01:38:23 SkyScan query 01:38:24 SkyScan query done: ret=0 az=108.885<-7259 ze=38.49<-9434 Statuses=0009 0008 01:38:24 Msec=0 True Az=108.885 Ze=38.49 Az status=0009 Ze status=0008 01:38:24 Check angles 01:38:24 SkyScan query 01:38:25 SkyScan query done: ret=0 az=126.495<-8433 ze=38.505<-9433 Statuses=0009 0008 01:38:25 Msec=750 True Az=126.495 Ze=38.505 Az status=0009 Ze status=0008 01:38:25 Check angles 01:38:25 SkyScan query 01:38:25 SkyScan query done: ret=0 az=143.895<-9593 ze=38.505<-9433 Statuses=0009 0008 01:38:25 Msec=1500 True Az=143.895 Ze=38.505 Az status=0009 Ze status=0008 01:38:25 Check angles 01:38:25 SkyScan query 01:38:26 SkyScan query done: ret=0 az=161.19<-10746 ze=38.505<-9433 Statuses=0009 0008 01:38:26 Msec=2250 True Az=161.19 Ze=38.505 Az status=0009 Ze status=0008 01:38:26 Check angles 01:38:26 SkyScan query 01:38:27 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 01:38:27 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 01:38:27 Check angles 01:38:27 SkyScan query 01:38:28 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:38:28 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:38:28 Message to Master queued w/err=0: serial=48949 error=0 01:38:33 Received message from Master: op=Filter serial=48950 01:38:33 Color wheel filter change from 0 to 0 01:38:33 FLIGetFilterPos err=0 currentPosition=0 01:38:33 FLIGetStepsRemaining err=0 RemainingSteps=0 01:38:33 Filter is already there-color wheel unchanged 01:38:33 Received message from Master: op=Shutter serial=48951 01:38:33 Shutter LASER close 01:38:33 Received message from Camera: op=State serial=48953 01:38:33 GetSingleValue result=40 Value=cccccccc 01:38:33 SkyScan query 01:38:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:38:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:38:33 Parameters OK 01:38:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:38:33 Set A/D data flow result=40 01:38:33 Set A/D channel type result=40 01:38:33 Set A/D encoding result=40 01:38:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:38:33 Set channel filter=0.000000e+000 result=40 01:38:33 Config A/D Result=40 01:38:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:38:33 Get A/D filter: -9.255963e+061 result=40 01:38:33 Get A/D value=-858993460 result=40 01:38:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:38:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:38:33 Parameters OK 01:38:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:38:33 Set A/D data flow result=40 01:38:33 Set A/D channel type result=40 01:38:33 Set A/D encoding result=40 01:38:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:38:33 Set channel filter=0.000000e+000 result=40 01:38:33 Config A/D Result=40 01:38:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:38:33 Get A/D filter: -9.255963e+061 result=40 01:38:33 Get A/D value=-858993460 result=40 01:38:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:38:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:38:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:38:33 Aux= 01:38:33 Message to Camera, serial 48953 queued 01:39:10 Received message from Master: op=PointingHead serial=48966 01:39:10 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:39:10 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:39:10 Point started: ret=0 01:39:10 point_skyscan result=0 01:39:11 Check angles 01:39:11 SkyScan query 01:39:12 SkyScan query done: ret=0 az=152.925<-10195 ze=8.79<-11414 Statuses=0009 0009 01:39:12 Msec=0 True Az=152.925 Ze=8.79 Az status=0009 Ze status=0009 01:39:12 Check angles 01:39:12 SkyScan query 01:39:13 SkyScan query done: ret=0 az=135.465<-9031 ze=-12.165<-12811 Statuses=0009 0009 01:39:13 Msec=750 True Az=135.465 Ze=-12.165 Az status=0009 Ze status=0009 01:39:13 Check angles 01:39:13 SkyScan query 01:39:13 SkyScan query done: ret=0 az=117.93<-7862 ze=-33.09<-14206 Statuses=0009 0009 01:39:13 Msec=1500 True Az=117.93 Ze=-33.09 Az status=0009 Ze status=0009 01:39:13 Check angles 01:39:13 SkyScan query 01:39:14 SkyScan query done: ret=0 az=100.575<-6705 ze=-51.525<-15435 Statuses=0009 0009 01:39:14 Msec=2250 True Az=100.575 Ze=-51.525 Az status=0009 Ze status=0009 01:39:14 Check angles 01:39:14 SkyScan query 01:39:15 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 01:39:15 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 01:39:15 Check angles 01:39:15 SkyScan query 01:39:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:39:16 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:39:16 Message to Master queued w/err=0: serial=48966 error=0 01:39:21 Received message from Master: op=Filter serial=48967 01:39:21 Color wheel filter change from 0 to 0 01:39:21 FLIGetFilterPos err=0 currentPosition=0 01:39:21 FLIGetStepsRemaining err=0 RemainingSteps=0 01:39:21 Filter is already there-color wheel unchanged 01:39:21 Received message from Master: op=Shutter serial=48968 01:39:21 Shutter LASER close 01:39:21 Received message from Camera: op=State serial=48970 01:39:21 GetSingleValue result=40 Value=cccccccc 01:39:21 SkyScan query 01:39:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:39:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:39:21 Parameters OK 01:39:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:39:21 Set A/D data flow result=40 01:39:21 Set A/D channel type result=40 01:39:21 Set A/D encoding result=40 01:39:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:39:21 Set channel filter=0.000000e+000 result=40 01:39:21 Config A/D Result=40 01:39:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:39:21 Get A/D filter: -9.255963e+061 result=40 01:39:21 Get A/D value=-858993460 result=40 01:39:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:39:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:39:21 Parameters OK 01:39:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:39:21 Set A/D data flow result=40 01:39:21 Set A/D channel type result=40 01:39:21 Set A/D encoding result=40 01:39:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:39:21 Set channel filter=0.000000e+000 result=40 01:39:21 Config A/D Result=40 01:39:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:39:21 Get A/D filter: -9.255963e+061 result=40 01:39:21 Get A/D value=-858993460 result=40 01:39:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:39:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:39:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:39:21 Aux= 01:39:21 Message to Camera, serial 48970 queued 01:39:58 Received message from Master: op=PointingHead serial=48983 01:39:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:39:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:39:59 Point started: ret=0 01:39:59 point_skyscan result=0 01:39:59 Check angles 01:39:59 SkyScan query 01:40:00 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.48<-17432 Statuses=0009 0009 01:40:00 Msec=0 True Az=109.14 Ze=-81.48 Az status=0009 Ze status=0009 01:40:00 Check angles 01:40:00 SkyScan query 01:40:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.45<-18830 Statuses=0008 0009 01:40:01 Msec=750 True Az=112.995 Ze=-102.45 Az status=0008 Ze status=0009 01:40:01 Check angles 01:40:01 SkyScan query 01:40:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.39<-20226 Statuses=0008 0009 01:40:01 Msec=1500 True Az=112.995 Ze=-123.39 Az status=0008 Ze status=0009 01:40:02 Check angles 01:40:02 SkyScan query 01:40:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.345<-21623 Statuses=0008 0009 01:40:02 Msec=2250 True Az=112.995 Ze=-144.345 Az status=0008 Ze status=0009 01:40:02 Check angles 01:40:02 SkyScan query 01:40:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.285<-23019 Statuses=0008 0009 01:40:03 Msec=3000 True Az=112.995 Ze=-165.285 Az status=0008 Ze status=0009 01:40:03 Check angles 01:40:03 SkyScan query 01:40:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:40:04 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:40:04 Message to Master queued w/err=0: serial=48983 error=0 01:40:09 Received message from Master: op=Filter serial=48984 01:40:09 Color wheel filter change from 0 to 0 01:40:09 FLIGetFilterPos err=0 currentPosition=0 01:40:09 FLIGetStepsRemaining err=0 RemainingSteps=0 01:40:09 Filter is already there-color wheel unchanged 01:40:09 Received message from Master: op=Shutter serial=48985 01:40:09 Shutter LASER open 01:40:09 Received message from Camera: op=State serial=48987 01:40:09 GetSingleValue result=40 Value=cccccccc 01:40:09 SkyScan query 01:40:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:40:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:40:10 Parameters OK 01:40:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:40:10 Set A/D data flow result=40 01:40:10 Set A/D channel type result=40 01:40:10 Set A/D encoding result=40 01:40:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:40:10 Set channel filter=0.000000e+000 result=40 01:40:10 Config A/D Result=40 01:40:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:40:10 Get A/D filter: -9.255963e+061 result=40 01:40:10 Get A/D value=-858993460 result=40 01:40:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:40:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:40:10 Parameters OK 01:40:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:40:10 Set A/D data flow result=40 01:40:10 Set A/D channel type result=40 01:40:10 Set A/D encoding result=40 01:40:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:40:10 Set channel filter=0.000000e+000 result=40 01:40:10 Config A/D Result=40 01:40:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:40:10 Get A/D filter: -9.255963e+061 result=40 01:40:10 Get A/D value=-858993460 result=40 01:40:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:40:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:40:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:40:10 Aux= 01:40:10 Message to Camera, serial 48987 queued 01:40:18 Received message from Master: op=Shutter serial=48997 01:40:18 Shutter LASER close 01:40:18 Received message from Master: op=PointingHead serial=49001 01:40:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:40:18 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:40:19 Point started: ret=0 01:40:19 point_skyscan result=0 01:40:20 Check angles 01:40:20 SkyScan query 01:40:20 SkyScan query done: ret=0 az=89.925<-5995 ze=157.38<-1508 Statuses=0009 0009 01:40:20 Msec=0 True Az=89.925 Ze=157.38 Az status=0009 Ze status=0009 01:40:20 Check angles 01:40:20 SkyScan query 01:40:21 SkyScan query done: ret=0 az=72.045<-4803 ze=135.945<-2937 Statuses=0009 0009 01:40:21 Msec=750 True Az=72.045 Ze=135.945 Az status=0009 Ze status=0009 01:40:21 Check angles 01:40:21 SkyScan query 01:40:22 SkyScan query done: ret=0 az=54.855<-3657 ze=115.02<-4332 Statuses=0009 0009 01:40:22 Msec=1500 True Az=54.855 Ze=115.02 Az status=0009 Ze status=0009 01:40:22 Check angles 01:40:22 SkyScan query 01:40:22 SkyScan query done: ret=0 az=40.89<-2726 ze=94.05<-5730 Statuses=0009 0009 01:40:22 Msec=2250 True Az=40.89 Ze=94.05 Az status=0009 Ze status=0009 01:40:23 Check angles 01:40:23 SkyScan query 01:40:23 SkyScan query done: ret=0 az=40.995<-2733 ze=73.08<-7128 Statuses=0008 0009 01:40:23 Msec=3000 True Az=40.995 Ze=73.08 Az status=0008 Ze status=0009 01:40:23 Check angles 01:40:23 SkyScan query 01:40:24 SkyScan query done: ret=0 az=40.995<-2733 ze=52.62<-8492 Statuses=0008 0009 01:40:24 Msec=3750 True Az=40.995 Ze=52.62 Az status=0008 Ze status=0009 01:40:24 Check angles 01:40:24 SkyScan query 01:40:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:40:25 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:40:25 Message to Master queued w/err=0: serial=49001 error=0 01:40:30 Received message from Master: op=Filter serial=49002 01:40:30 Color wheel filter change from 0 to 0 01:40:30 FLIGetFilterPos err=0 currentPosition=0 01:40:30 FLIGetStepsRemaining err=0 RemainingSteps=0 01:40:30 Filter is already there-color wheel unchanged 01:40:30 Received message from Master: op=Shutter serial=49003 01:40:30 Shutter LASER close 01:40:30 Received message from Camera: op=State serial=49005 01:40:30 GetSingleValue result=40 Value=cccccccc 01:40:30 SkyScan query 01:40:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:40:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:40:31 Parameters OK 01:40:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:40:31 Set A/D data flow result=40 01:40:31 Set A/D channel type result=40 01:40:31 Set A/D encoding result=40 01:40:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:40:31 Set channel filter=0.000000e+000 result=40 01:40:31 Config A/D Result=40 01:40:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:40:31 Get A/D filter: -9.255963e+061 result=40 01:40:31 Get A/D value=-858993460 result=40 01:40:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:40:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:40:31 Parameters OK 01:40:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:40:31 Set A/D data flow result=40 01:40:31 Set A/D channel type result=40 01:40:31 Set A/D encoding result=40 01:40:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:40:31 Set channel filter=0.000000e+000 result=40 01:40:31 Config A/D Result=40 01:40:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:40:31 Get A/D filter: -9.255963e+061 result=40 01:40:31 Get A/D value=-858993460 result=40 01:40:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:40:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:40:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:40:31 Aux= 01:40:31 Message to Camera, serial 49005 queued 01:41:07 Received message from Master: op=PointingHead serial=49018 01:41:07 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 01:41:07 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 01:41:08 Point started: ret=0 01:41:08 point_skyscan result=0 01:41:09 Check angles 01:41:09 SkyScan query 01:41:09 SkyScan query done: ret=0 az=64.02<-4268 ze=66.555<-7563 Statuses=0009 0008 01:41:09 Msec=0 True Az=64.02 Ze=66.555 Az status=0009 Ze status=0008 01:41:09 Check angles 01:41:09 SkyScan query 01:41:10 SkyScan query done: ret=0 az=81.75<-5450 ze=66.495<-7567 Statuses=0009 0008 01:41:10 Msec=750 True Az=81.75 Ze=66.495 Az status=0009 Ze status=0008 01:41:10 Check angles 01:41:10 SkyScan query 01:41:11 SkyScan query done: ret=0 az=99.48<-6632 ze=66.495<-7567 Statuses=0009 0008 01:41:11 Msec=1500 True Az=99.48 Ze=66.495 Az status=0009 Ze status=0008 01:41:11 Check angles 01:41:11 SkyScan query 01:41:11 SkyScan query done: ret=0 az=117<-7800 ze=66.495<-7567 Statuses=0009 0008 01:41:11 Msec=2250 True Az=117 Ze=66.495 Az status=0009 Ze status=0008 01:41:12 Check angles 01:41:12 SkyScan query 01:41:12 SkyScan query done: ret=0 az=134.355<-8957 ze=66.495<-7567 Statuses=0009 0008 01:41:12 Msec=3000 True Az=134.355 Ze=66.495 Az status=0009 Ze status=0008 01:41:12 Check angles 01:41:12 SkyScan query 01:41:13 SkyScan query done: ret=0 az=152.175<-10145 ze=66.495<-7567 Statuses=0009 0008 01:41:13 Msec=3750 True Az=152.175 Ze=66.495 Az status=0009 Ze status=0008 01:41:13 Check angles 01:41:13 SkyScan query 01:41:14 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:41:14 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 01:41:14 Message to Master queued w/err=0: serial=49018 error=0 01:41:19 Received message from Master: op=Filter serial=49019 01:41:19 Color wheel filter change from 0 to 0 01:41:19 FLIGetFilterPos err=0 currentPosition=0 01:41:19 FLIGetStepsRemaining err=0 RemainingSteps=0 01:41:19 Filter is already there-color wheel unchanged 01:41:19 Received message from Master: op=Shutter serial=49020 01:41:19 Shutter LASER close 01:41:19 Received message from Camera: op=State serial=49022 01:41:19 GetSingleValue result=40 Value=cccccccc 01:41:19 SkyScan query 01:41:19 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:41:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:41:19 Parameters OK 01:41:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:41:19 Set A/D data flow result=40 01:41:19 Set A/D channel type result=40 01:41:19 Set A/D encoding result=40 01:41:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:41:19 Set channel filter=0.000000e+000 result=40 01:41:19 Config A/D Result=40 01:41:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:41:19 Get A/D filter: -9.255963e+061 result=40 01:41:19 Get A/D value=-858993460 result=40 01:41:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:41:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:41:19 Parameters OK 01:41:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:41:19 Set A/D data flow result=40 01:41:19 Set A/D channel type result=40 01:41:19 Set A/D encoding result=40 01:41:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:41:19 Set channel filter=0.000000e+000 result=40 01:41:19 Config A/D Result=40 01:41:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:41:19 Get A/D filter: -9.255963e+061 result=40 01:41:19 Get A/D value=-858993460 result=40 01:41:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:41:19 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:41:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:41:19 Aux= 01:41:19 Message to Camera, serial 49022 queued 01:41:56 Received message from Master: op=PointingHead serial=49035 01:41:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:41:56 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:41:57 Point started: ret=0 01:41:57 point_skyscan result=0 01:41:57 Check angles 01:41:57 SkyScan query 01:41:58 SkyScan query done: ret=0 az=135.165<-9011 ze=36.825<-9545 Statuses=0009 0009 01:41:58 Msec=0 True Az=135.165 Ze=36.825 Az status=0009 Ze status=0009 01:41:58 Check angles 01:41:58 SkyScan query 01:41:59 SkyScan query done: ret=0 az=117.6<-7840 ze=15.885<-10941 Statuses=0009 0009 01:41:59 Msec=750 True Az=117.6 Ze=15.885 Az status=0009 Ze status=0009 01:41:59 Check angles 01:41:59 SkyScan query 01:41:59 SkyScan query done: ret=0 az=100.29<-6686 ze=-5.1<-12340 Statuses=0009 0009 01:41:59 Msec=1500 True Az=100.29 Ze=-5.1 Az status=0009 Ze status=0009 01:42:00 Check angles 01:42:00 SkyScan query 01:42:00 SkyScan query done: ret=0 az=82.74<-5516 ze=-26.025<-13735 Statuses=0009 0009 01:42:00 Msec=2250 True Az=82.74 Ze=-26.025 Az status=0009 Ze status=0009 01:42:00 Check angles 01:42:00 SkyScan query 01:42:01 SkyScan query done: ret=0 az=65.265<-4351 ze=-38.565<-14571 Statuses=0009 0008 01:42:01 Msec=3000 True Az=65.265 Ze=-38.565 Az status=0009 Ze status=0008 01:42:01 Check angles 01:42:01 SkyScan query 01:42:02 SkyScan query done: ret=0 az=47.775<-3185 ze=-38.535<-14569 Statuses=0009 0008 01:42:02 Msec=3750 True Az=47.775 Ze=-38.535 Az status=0009 Ze status=0008 01:42:02 Check angles 01:42:02 SkyScan query 01:42:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:42:02 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 01:42:02 Message to Master queued w/err=0: serial=49035 error=0 01:42:07 Received message from Master: op=Filter serial=49036 01:42:07 Color wheel filter change from 0 to 0 01:42:07 FLIGetFilterPos err=0 currentPosition=0 01:42:07 FLIGetStepsRemaining err=0 RemainingSteps=0 01:42:07 Filter is already there-color wheel unchanged 01:42:08 Received message from Master: op=Shutter serial=49037 01:42:08 Shutter LASER close 01:42:08 Received message from Camera: op=State serial=49039 01:42:08 GetSingleValue result=40 Value=cccccccc 01:42:08 SkyScan query 01:42:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:42:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:42:08 Parameters OK 01:42:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:42:08 Set A/D data flow result=40 01:42:08 Set A/D channel type result=40 01:42:08 Set A/D encoding result=40 01:42:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:42:08 Set channel filter=0.000000e+000 result=40 01:42:08 Config A/D Result=40 01:42:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:42:08 Get A/D filter: -9.255963e+061 result=40 01:42:08 Get A/D value=-858993460 result=40 01:42:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:42:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:42:08 Parameters OK 01:42:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:42:08 Set A/D data flow result=40 01:42:08 Set A/D channel type result=40 01:42:08 Set A/D encoding result=40 01:42:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:42:08 Set channel filter=0.000000e+000 result=40 01:42:08 Config A/D Result=40 01:42:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:42:08 Get A/D filter: -9.255963e+061 result=40 01:42:08 Get A/D value=-858993460 result=40 01:42:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:42:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:42:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:42:08 Aux= 01:42:08 Message to Camera, serial 49039 queued 01:42:45 Received message from Master: op=PointingHead serial=49052 01:42:45 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:42:45 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:42:45 Point started: ret=0 01:42:45 point_skyscan result=0 01:42:46 Check angles 01:42:46 SkyScan query 01:42:47 SkyScan query done: ret=0 az=64.08<-4272 ze=-68.16<-16544 Statuses=0009 0009 01:42:47 Msec=0 True Az=64.08 Ze=-68.16 Az status=0009 Ze status=0009 01:42:47 Check angles 01:42:47 SkyScan query 01:42:48 SkyScan query done: ret=0 az=81.285<-5419 ze=-89.145<-17943 Statuses=0009 0009 01:42:48 Msec=750 True Az=81.285 Ze=-89.145 Az status=0009 Ze status=0009 01:42:48 Check angles 01:42:48 SkyScan query 01:42:48 SkyScan query done: ret=0 az=98.925<-6595 ze=-110.1<-19340 Statuses=0009 0009 01:42:48 Msec=1500 True Az=98.925 Ze=-110.1 Az status=0009 Ze status=0009 01:42:48 Check angles 01:42:48 SkyScan query 01:42:49 SkyScan query done: ret=0 az=116.475<-7765 ze=-131.04<-20736 Statuses=0009 0009 01:42:49 Msec=2250 True Az=116.475 Ze=-131.04 Az status=0009 Ze status=0009 01:42:49 Check angles 01:42:49 SkyScan query 01:42:50 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 01:42:50 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 01:42:50 Check angles 01:42:50 SkyScan query 01:42:51 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:42:51 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:42:51 Message to Master queued w/err=0: serial=49052 error=0 01:42:56 Received message from Master: op=Filter serial=49053 01:42:56 Color wheel filter change from 0 to 0 01:42:56 FLIGetFilterPos err=0 currentPosition=0 01:42:56 FLIGetStepsRemaining err=0 RemainingSteps=0 01:42:56 Filter is already there-color wheel unchanged 01:42:56 Received message from Master: op=Shutter serial=49054 01:42:56 Shutter LASER close 01:42:56 Received message from Camera: op=State serial=49056 01:42:56 GetSingleValue result=40 Value=cccccccc 01:42:56 SkyScan query 01:42:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:42:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:42:56 Parameters OK 01:42:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:42:56 Set A/D data flow result=40 01:42:56 Set A/D channel type result=40 01:42:56 Set A/D encoding result=40 01:42:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:42:56 Set channel filter=0.000000e+000 result=40 01:42:56 Config A/D Result=40 01:42:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:42:56 Get A/D filter: -9.255963e+061 result=40 01:42:56 Get A/D value=-858993460 result=40 01:42:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:42:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:42:56 Parameters OK 01:42:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:42:56 Set A/D data flow result=40 01:42:56 Set A/D channel type result=40 01:42:56 Set A/D encoding result=40 01:42:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:42:56 Set channel filter=0.000000e+000 result=40 01:42:56 Config A/D Result=40 01:42:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:42:56 Get A/D filter: -9.255963e+061 result=40 01:42:56 Get A/D value=-858993460 result=40 01:42:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:42:56 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:42:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:42:56 Aux= 01:42:56 Message to Camera, serial 49056 queued 01:43:33 Received message from Master: op=PointingHead serial=49069 01:43:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:43:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:43:33 Point started: ret=0 01:43:33 point_skyscan result=0 01:43:34 Check angles 01:43:34 SkyScan query 01:43:35 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.27<-23418 Statuses=0009 0009 01:43:35 Msec=0 True Az=113.01 Ze=-171.27 Az status=0009 Ze status=0009 01:43:35 Check angles 01:43:35 SkyScan query 01:43:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:43:36 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:43:36 Message to Master queued w/err=0: serial=49069 error=0 01:43:41 Received message from Master: op=Filter serial=49070 01:43:41 Color wheel filter change from 0 to 0 01:43:41 FLIGetFilterPos err=0 currentPosition=0 01:43:41 FLIGetStepsRemaining err=0 RemainingSteps=0 01:43:41 Filter is already there-color wheel unchanged 01:43:41 Received message from Master: op=Shutter serial=49071 01:43:41 Shutter LASER open 01:43:41 Received message from Camera: op=State serial=49073 01:43:41 GetSingleValue result=40 Value=cccccccc 01:43:41 SkyScan query 01:43:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:43:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:43:42 Parameters OK 01:43:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:43:42 Set A/D data flow result=40 01:43:42 Set A/D channel type result=40 01:43:42 Set A/D encoding result=40 01:43:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:43:42 Set channel filter=0.000000e+000 result=40 01:43:42 Config A/D Result=40 01:43:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:43:42 Get A/D filter: -9.255963e+061 result=40 01:43:42 Get A/D value=-858993460 result=40 01:43:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:43:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:43:42 Parameters OK 01:43:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:43:42 Set A/D data flow result=40 01:43:42 Set A/D channel type result=40 01:43:42 Set A/D encoding result=40 01:43:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:43:42 Set channel filter=0.000000e+000 result=40 01:43:42 Config A/D Result=40 01:43:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:43:42 Get A/D filter: -9.255963e+061 result=40 01:43:42 Get A/D value=-858993460 result=40 01:43:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:43:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:43:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:43:42 Aux= 01:43:42 Message to Camera, serial 49073 queued 01:43:50 Received message from Master: op=Shutter serial=49083 01:43:50 Shutter LASER close 01:43:51 Received message from Master: op=PointingHead serial=49087 01:43:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:43:51 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:43:51 Point started: ret=0 01:43:51 point_skyscan result=0 01:43:52 Check angles 01:43:52 SkyScan query 01:43:52 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.845<-21523 Statuses=0009 0009 01:43:52 Msec=0 True Az=136.35 Ze=-142.845 Az status=0009 Ze status=0009 01:43:52 Check angles 01:43:52 SkyScan query 01:43:53 SkyScan query done: ret=0 az=153.84<-10256 ze=-121.83<-20122 Statuses=0009 0009 01:43:53 Msec=750 True Az=153.84 Ze=-121.83 Az status=0009 Ze status=0009 01:43:53 Check angles 01:43:53 SkyScan query 01:43:54 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.905<-18727 Statuses=0009 0009 01:43:54 Msec=1500 True Az=171.405 Ze=-100.905 Az status=0009 Ze status=0009 01:43:54 Check angles 01:43:54 SkyScan query 01:43:55 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.98<-17332 Statuses=0008 0009 01:43:55 Msec=2250 True Az=176.025 Ze=-79.98 Az status=0008 Ze status=0009 01:43:55 Check angles 01:43:55 SkyScan query 01:43:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.01<-15934 Statuses=0008 0009 01:43:55 Msec=3000 True Az=175.995 Ze=-59.01 Az status=0008 Ze status=0009 01:43:55 Check angles 01:43:55 SkyScan query 01:43:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:43:56 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:43:56 Message to Master queued w/err=0: serial=49087 error=0 01:44:01 Received message from Master: op=Filter serial=49088 01:44:01 Color wheel filter change from 0 to 0 01:44:01 FLIGetFilterPos err=0 currentPosition=0 01:44:01 FLIGetStepsRemaining err=0 RemainingSteps=0 01:44:01 Filter is already there-color wheel unchanged 01:44:01 Received message from Master: op=Shutter serial=49089 01:44:01 Shutter LASER close 01:44:01 Received message from Camera: op=State serial=49091 01:44:01 GetSingleValue result=40 Value=cccccccc 01:44:01 SkyScan query 01:44:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:44:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:44:02 Parameters OK 01:44:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:44:02 Set A/D data flow result=40 01:44:02 Set A/D channel type result=40 01:44:02 Set A/D encoding result=40 01:44:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:44:02 Set channel filter=0.000000e+000 result=40 01:44:02 Config A/D Result=40 01:44:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:44:02 Get A/D filter: -9.255963e+061 result=40 01:44:02 Get A/D value=-858993460 result=40 01:44:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:44:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:44:02 Parameters OK 01:44:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:44:02 Set A/D data flow result=40 01:44:02 Set A/D channel type result=40 01:44:02 Set A/D encoding result=40 01:44:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:44:02 Set channel filter=0.000000e+000 result=40 01:44:02 Config A/D Result=40 01:44:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:44:02 Get A/D filter: -9.255963e+061 result=40 01:44:02 Get A/D value=-858993460 result=40 01:44:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:44:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:44:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:44:02 Aux= 01:44:02 Message to Camera, serial 49091 queued 01:44:39 Received message from Master: op=PointingHead serial=49104 01:44:39 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:44:39 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:44:39 Point started: ret=0 01:44:39 point_skyscan result=0 01:44:40 Check angles 01:44:40 SkyScan query 01:44:40 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.705<-13447 Statuses=0009 0009 01:44:40 Msec=0 True Az=152.985 Ze=-21.705 Az status=0009 Ze status=0009 01:44:41 Check angles 01:44:41 SkyScan query 01:44:41 SkyScan query done: ret=0 az=135.27<-9018 ze=-0.375<-12025 Statuses=0009 0009 01:44:41 Msec=750 True Az=135.27 Ze=-0.375 Az status=0009 Ze status=0009 01:44:41 Check angles 01:44:41 SkyScan query 01:44:42 SkyScan query done: ret=0 az=117.555<-7837 ze=20.565<-10629 Statuses=0009 0009 01:44:42 Msec=1500 True Az=117.555 Ze=20.565 Az status=0009 Ze status=0009 01:44:42 Check angles 01:44:42 SkyScan query 01:44:43 SkyScan query done: ret=0 az=100.185<-6679 ze=41.55<-9230 Statuses=0009 0009 01:44:43 Msec=2250 True Az=100.185 Ze=41.55 Az status=0009 Ze status=0009 01:44:43 Check angles 01:44:43 SkyScan query 01:44:43 SkyScan query done: ret=0 az=86.055<-5737 ze=51.54<-8564 Statuses=0009 0008 01:44:43 Msec=3000 True Az=86.055 Ze=51.54 Az status=0009 Ze status=0008 01:44:44 Check angles 01:44:44 SkyScan query 01:44:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:44:44 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:44:44 Message to Master queued w/err=0: serial=49104 error=0 01:44:49 Received message from Master: op=Filter serial=49105 01:44:49 Color wheel filter change from 0 to 0 01:44:49 FLIGetFilterPos err=0 currentPosition=0 01:44:49 FLIGetStepsRemaining err=0 RemainingSteps=0 01:44:49 Filter is already there-color wheel unchanged 01:44:49 Received message from Master: op=Shutter serial=49106 01:44:49 Shutter LASER close 01:44:49 Received message from Camera: op=State serial=49108 01:44:49 GetSingleValue result=40 Value=cccccccc 01:44:49 SkyScan query 01:44:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:44:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:44:50 Parameters OK 01:44:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:44:50 Set A/D data flow result=40 01:44:50 Set A/D channel type result=40 01:44:50 Set A/D encoding result=40 01:44:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:44:50 Set channel filter=0.000000e+000 result=40 01:44:50 Config A/D Result=40 01:44:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:44:50 Get A/D filter: -9.255963e+061 result=40 01:44:50 Get A/D value=-858993460 result=40 01:44:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:44:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:44:50 Parameters OK 01:44:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:44:50 Set A/D data flow result=40 01:44:50 Set A/D channel type result=40 01:44:50 Set A/D encoding result=40 01:44:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:44:50 Set channel filter=0.000000e+000 result=40 01:44:50 Config A/D Result=40 01:44:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:44:50 Get A/D filter: -9.255963e+061 result=40 01:44:50 Get A/D value=-858993460 result=40 01:44:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:44:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:44:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:44:50 Aux= 01:44:50 Message to Camera, serial 49108 queued 01:45:27 Received message from Master: op=PointingHead serial=49121 01:45:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:45:27 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:45:27 Point started: ret=0 01:45:27 point_skyscan result=0 01:45:28 Check angles 01:45:28 SkyScan query 01:45:29 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 01:45:29 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 01:45:29 Received message from Master: op=Identify serial=49122 01:45:29 Check angles 01:45:29 SkyScan query 01:45:29 SkyScan query done: ret=0 az=127.245<-8483 ze=38.505<-9433 Statuses=0009 0008 01:45:29 Msec=750 True Az=127.245 Ze=38.505 Az status=0009 Ze status=0008 01:45:30 Check angles 01:45:30 SkyScan query 01:45:30 SkyScan query done: ret=0 az=144.705<-9647 ze=38.505<-9433 Statuses=0009 0008 01:45:30 Msec=1500 True Az=144.705 Ze=38.505 Az status=0009 Ze status=0008 01:45:30 Check angles 01:45:30 SkyScan query 01:45:31 SkyScan query done: ret=0 az=162.57<-10838 ze=38.505<-9433 Statuses=0009 0008 01:45:31 Msec=2250 True Az=162.57 Ze=38.505 Az status=0009 Ze status=0008 01:45:31 Check angles 01:45:31 SkyScan query 01:45:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 01:45:32 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 01:45:32 Check angles 01:45:32 SkyScan query 01:45:32 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:45:32 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:45:32 Message to Master queued w/err=0: serial=49121 error=0 01:45:37 Received message from Master: op=Filter serial=49125 01:45:37 Color wheel filter change from 0 to 0 01:45:37 FLIGetFilterPos err=0 currentPosition=0 01:45:37 FLIGetStepsRemaining err=0 RemainingSteps=0 01:45:37 Filter is already there-color wheel unchanged 01:45:38 Received message from Master: op=Shutter serial=49126 01:45:38 Shutter LASER close 01:45:38 Received message from Camera: op=State serial=49128 01:45:38 GetSingleValue result=40 Value=cccccccc 01:45:38 SkyScan query 01:45:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:45:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:45:38 Parameters OK 01:45:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:45:38 Set A/D data flow result=40 01:45:38 Set A/D channel type result=40 01:45:38 Set A/D encoding result=40 01:45:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:45:38 Set channel filter=0.000000e+000 result=40 01:45:38 Config A/D Result=40 01:45:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:45:38 Get A/D filter: -9.255963e+061 result=40 01:45:38 Get A/D value=-858993460 result=40 01:45:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:45:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:45:38 Parameters OK 01:45:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:45:38 Set A/D data flow result=40 01:45:38 Set A/D channel type result=40 01:45:38 Set A/D encoding result=40 01:45:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:45:38 Set channel filter=0.000000e+000 result=40 01:45:38 Config A/D Result=40 01:45:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:45:38 Get A/D filter: -9.255963e+061 result=40 01:45:38 Get A/D value=-858993460 result=40 01:45:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:45:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:45:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:45:38 Aux= 01:45:38 Message to Camera, serial 49128 queued 01:46:15 Received message from Master: op=PointingHead serial=49141 01:46:15 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:46:15 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:46:15 Point started: ret=0 01:46:15 point_skyscan result=0 01:46:16 Check angles 01:46:16 SkyScan query 01:46:17 SkyScan query done: ret=0 az=152.985<-10199 ze=8.82<-11412 Statuses=0009 0009 01:46:17 Msec=0 True Az=152.985 Ze=8.82 Az status=0009 Ze status=0009 01:46:17 Check angles 01:46:17 SkyScan query 01:46:18 SkyScan query done: ret=0 az=135.465<-9031 ze=-12.12<-12808 Statuses=0009 0009 01:46:18 Msec=750 True Az=135.465 Ze=-12.12 Az status=0009 Ze status=0009 01:46:18 Check angles 01:46:18 SkyScan query 01:46:18 SkyScan query done: ret=0 az=117.93<-7862 ze=-33.06<-14204 Statuses=0009 0009 01:46:18 Msec=1500 True Az=117.93 Ze=-33.06 Az status=0009 Ze status=0009 01:46:18 Check angles [UTC 2018-12-11 01:46:18] 01:46:18 SkyScan query 01:46:19 SkyScan query done: ret=0 az=99.09<-6606 ze=-51.57<-15438 Statuses=0009 0009 01:46:19 Msec=2250 True Az=99.09 Ze=-51.57 Az status=0009 Ze status=0009 01:46:19 Check angles 01:46:19 SkyScan query 01:46:20 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 01:46:20 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 01:46:20 Check angles 01:46:20 SkyScan query 01:46:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:46:21 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:46:21 Message to Master queued w/err=0: serial=49141 error=0 01:46:26 Received message from Master: op=Filter serial=49142 01:46:26 Color wheel filter change from 0 to 0 01:46:26 FLIGetFilterPos err=0 currentPosition=0 01:46:26 FLIGetStepsRemaining err=0 RemainingSteps=0 01:46:26 Filter is already there-color wheel unchanged 01:46:26 Received message from Master: op=Shutter serial=49143 01:46:26 Shutter LASER close 01:46:26 Received message from Camera: op=State serial=49145 01:46:26 GetSingleValue result=40 Value=cccccccc 01:46:26 SkyScan query 01:46:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:46:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:46:26 Parameters OK 01:46:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:46:26 Set A/D data flow result=40 01:46:26 Set A/D channel type result=40 01:46:26 Set A/D encoding result=40 01:46:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:46:26 Set channel filter=0.000000e+000 result=40 01:46:26 Config A/D Result=40 01:46:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:46:26 Get A/D filter: -9.255963e+061 result=40 01:46:26 Get A/D value=-858993460 result=40 01:46:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:46:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:46:26 Parameters OK 01:46:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:46:26 Set A/D data flow result=40 01:46:26 Set A/D channel type result=40 01:46:26 Set A/D encoding result=40 01:46:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:46:26 Set channel filter=0.000000e+000 result=40 01:46:26 Config A/D Result=40 01:46:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:46:26 Get A/D filter: -9.255963e+061 result=40 01:46:26 Get A/D value=-858993460 result=40 01:46:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:46:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:46:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:46:26 Aux= 01:46:26 Message to Camera, serial 49145 queued 01:47:03 Received message from Master: op=PointingHead serial=49158 01:47:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:47:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:47:04 Point started: ret=0 01:47:04 point_skyscan result=0 01:47:04 Check angles 01:47:04 SkyScan query 01:47:05 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.255<-17417 Statuses=0009 0009 01:47:05 Msec=0 True Az=108.99 Ze=-81.255 Az status=0009 Ze status=0009 01:47:05 Check angles 01:47:05 SkyScan query 01:47:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.675<-18845 Statuses=0008 0009 01:47:06 Msec=750 True Az=112.995 Ze=-102.675 Az status=0008 Ze status=0009 01:47:06 Check angles 01:47:06 SkyScan query 01:47:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.05<-20270 Statuses=0008 0009 01:47:06 Msec=1500 True Az=112.995 Ze=-124.05 Az status=0008 Ze status=0009 01:47:07 Check angles 01:47:07 SkyScan query 01:47:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.975<-21665 Statuses=0008 0009 01:47:07 Msec=2250 True Az=112.995 Ze=-144.975 Az status=0008 Ze status=0009 01:47:07 Check angles 01:47:07 SkyScan query 01:47:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.945<-23063 Statuses=0008 0009 01:47:08 Msec=3000 True Az=112.995 Ze=-165.945 Az status=0008 Ze status=0009 01:47:08 Check angles 01:47:08 SkyScan query 01:47:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:47:09 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:47:09 Message to Master queued w/err=0: serial=49158 error=0 01:47:14 Received message from Master: op=Filter serial=49159 01:47:14 Color wheel filter change from 0 to 0 01:47:14 FLIGetFilterPos err=0 currentPosition=0 01:47:14 FLIGetStepsRemaining err=0 RemainingSteps=0 01:47:14 Filter is already there-color wheel unchanged 01:47:14 Received message from Master: op=Shutter serial=49160 01:47:14 Shutter LASER open 01:47:14 Received message from Camera: op=State serial=49162 01:47:14 GetSingleValue result=40 Value=cccccccc 01:47:14 SkyScan query 01:47:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:47:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:47:15 Parameters OK 01:47:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:47:15 Set A/D data flow result=40 01:47:15 Set A/D channel type result=40 01:47:15 Set A/D encoding result=40 01:47:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:47:15 Set channel filter=0.000000e+000 result=40 01:47:15 Config A/D Result=40 01:47:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:47:15 Get A/D filter: -9.255963e+061 result=40 01:47:15 Get A/D value=-858993460 result=40 01:47:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:47:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:47:15 Parameters OK 01:47:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:47:15 Set A/D data flow result=40 01:47:15 Set A/D channel type result=40 01:47:15 Set A/D encoding result=40 01:47:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:47:15 Set channel filter=0.000000e+000 result=40 01:47:15 Config A/D Result=40 01:47:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:47:15 Get A/D filter: -9.255963e+061 result=40 01:47:15 Get A/D value=-858993460 result=40 01:47:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:47:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:47:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:47:15 Aux= 01:47:15 Message to Camera, serial 49162 queued 01:47:23 Received message from Master: op=Shutter serial=49172 01:47:23 Shutter LASER close 01:47:23 Received message from Master: op=PointingHead serial=49176 01:47:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:47:23 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:47:24 Point started: ret=0 01:47:24 point_skyscan result=0 01:47:25 Check angles 01:47:25 SkyScan query 01:47:25 SkyScan query done: ret=0 az=90.195<-6013 ze=157.5<-1500 Statuses=0009 0009 01:47:25 Msec=0 True Az=90.195 Ze=157.5 Az status=0009 Ze status=0009 01:47:25 Check angles 01:47:25 SkyScan query 01:47:26 SkyScan query done: ret=0 az=72.255<-4817 ze=136.11<-2926 Statuses=0009 0009 01:47:26 Msec=750 True Az=72.255 Ze=136.11 Az status=0009 Ze status=0009 01:47:26 Check angles 01:47:26 SkyScan query 01:47:27 SkyScan query done: ret=0 az=54.96<-3664 ze=115.17<-4322 Statuses=0009 0009 01:47:27 Msec=1500 True Az=54.96 Ze=115.17 Az status=0009 Ze status=0009 01:47:27 Check angles 01:47:27 SkyScan query 01:47:27 SkyScan query done: ret=0 az=40.875<-2725 ze=94.17<-5722 Statuses=0009 0009 01:47:27 Msec=2250 True Az=40.875 Ze=94.17 Az status=0009 Ze status=0009 01:47:28 Check angles 01:47:28 SkyScan query 01:47:28 SkyScan query done: ret=0 az=40.995<-2733 ze=73.215<-7119 Statuses=0008 0009 01:47:28 Msec=3000 True Az=40.995 Ze=73.215 Az status=0008 Ze status=0009 01:47:28 Check angles 01:47:28 SkyScan query 01:47:29 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 01:47:29 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 01:47:29 Check angles 01:47:29 SkyScan query 01:47:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:47:30 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:47:30 Message to Master queued w/err=0: serial=49176 error=0 01:47:35 Received message from Master: op=Filter serial=49177 01:47:35 Color wheel filter change from 0 to 0 01:47:35 FLIGetFilterPos err=0 currentPosition=0 01:47:35 FLIGetStepsRemaining err=0 RemainingSteps=0 01:47:35 Filter is already there-color wheel unchanged 01:47:35 Received message from Master: op=Shutter serial=49178 01:47:35 Shutter LASER close 01:47:35 Received message from Camera: op=State serial=49180 01:47:35 GetSingleValue result=40 Value=cccccccc 01:47:35 SkyScan query 01:47:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:47:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:47:36 Parameters OK 01:47:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:47:36 Set A/D data flow result=40 01:47:36 Set A/D channel type result=40 01:47:36 Set A/D encoding result=40 01:47:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:47:36 Set channel filter=0.000000e+000 result=40 01:47:36 Config A/D Result=40 01:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:47:36 Get A/D filter: -9.255963e+061 result=40 01:47:36 Get A/D value=-858993460 result=40 01:47:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:47:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:47:36 Parameters OK 01:47:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:47:36 Set A/D data flow result=40 01:47:36 Set A/D channel type result=40 01:47:36 Set A/D encoding result=40 01:47:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:47:36 Set channel filter=0.000000e+000 result=40 01:47:36 Config A/D Result=40 01:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:47:36 Get A/D filter: -9.255963e+061 result=40 01:47:36 Get A/D value=-858993460 result=40 01:47:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:47:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:47:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:47:36 Aux= 01:47:36 Message to Camera, serial 49180 queued 01:48:12 Received message from Master: op=PointingHead serial=49193 01:48:12 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 01:48:12 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 01:48:13 Point started: ret=0 01:48:13 point_skyscan result=0 01:48:13 Check angles 01:48:13 SkyScan query 01:48:14 SkyScan query done: ret=0 az=63.915<-4261 ze=66.555<-7563 Statuses=0009 0008 01:48:14 Msec=0 True Az=63.915 Ze=66.555 Az status=0009 Ze status=0008 01:48:14 Check angles 01:48:14 SkyScan query 01:48:15 SkyScan query done: ret=0 az=81.66<-5444 ze=66.495<-7567 Statuses=0009 0008 01:48:15 Msec=750 True Az=81.66 Ze=66.495 Az status=0009 Ze status=0008 01:48:15 Check angles 01:48:15 SkyScan query 01:48:16 SkyScan query done: ret=0 az=99.615<-6641 ze=66.495<-7567 Statuses=0009 0008 01:48:16 Msec=1500 True Az=99.615 Ze=66.495 Az status=0009 Ze status=0008 01:48:16 Check angles 01:48:16 SkyScan query 01:48:16 SkyScan query done: ret=0 az=117.12<-7808 ze=66.495<-7567 Statuses=0009 0008 01:48:16 Msec=2250 True Az=117.12 Ze=66.495 Az status=0009 Ze status=0008 01:48:17 Check angles 01:48:17 SkyScan query 01:48:17 SkyScan query done: ret=0 az=134.79<-8986 ze=66.495<-7567 Statuses=0009 0008 01:48:17 Msec=3000 True Az=134.79 Ze=66.495 Az status=0009 Ze status=0008 01:48:17 Check angles 01:48:17 SkyScan query 01:48:18 SkyScan query done: ret=0 az=152.685<-10179 ze=66.495<-7567 Statuses=0009 0008 01:48:18 Msec=3750 True Az=152.685 Ze=66.495 Az status=0009 Ze status=0008 01:48:18 Check angles 01:48:18 SkyScan query 01:48:19 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:48:19 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 01:48:19 Message to Master queued w/err=0: serial=49193 error=0 01:48:24 Received message from Master: op=Filter serial=49194 01:48:24 Color wheel filter change from 0 to 0 01:48:24 FLIGetFilterPos err=0 currentPosition=0 01:48:24 FLIGetStepsRemaining err=0 RemainingSteps=0 01:48:24 Filter is already there-color wheel unchanged 01:48:24 Received message from Master: op=Shutter serial=49195 01:48:24 Shutter LASER close 01:48:24 Received message from Camera: op=State serial=49197 01:48:24 GetSingleValue result=40 Value=cccccccc 01:48:24 SkyScan query 01:48:24 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:48:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:48:24 Parameters OK 01:48:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:48:24 Set A/D data flow result=40 01:48:24 Set A/D channel type result=40 01:48:24 Set A/D encoding result=40 01:48:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:48:24 Set channel filter=0.000000e+000 result=40 01:48:24 Config A/D Result=40 01:48:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:48:24 Get A/D filter: -9.255963e+061 result=40 01:48:24 Get A/D value=-858993460 result=40 01:48:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:48:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:48:24 Parameters OK 01:48:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:48:24 Set A/D data flow result=40 01:48:24 Set A/D channel type result=40 01:48:24 Set A/D encoding result=40 01:48:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:48:24 Set channel filter=0.000000e+000 result=40 01:48:24 Config A/D Result=40 01:48:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:48:24 Get A/D filter: -9.255963e+061 result=40 01:48:24 Get A/D value=-858993460 result=40 01:48:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:48:24 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:48:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:48:24 Aux= 01:48:24 Message to Camera, serial 49197 queued 01:49:01 Received message from Master: op=PointingHead serial=49210 01:49:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:49:01 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:49:02 Point started: ret=0 01:49:02 point_skyscan result=0 01:49:02 Check angles 01:49:02 SkyScan query 01:49:03 SkyScan query done: ret=0 az=134.73<-8982 ze=36.42<-9572 Statuses=0009 0009 01:49:03 Msec=0 True Az=134.73 Ze=36.42 Az status=0009 Ze status=0009 01:49:03 Check angles 01:49:03 SkyScan query 01:49:04 SkyScan query done: ret=0 az=116.85<-7790 ze=15.03<-10998 Statuses=0009 0009 01:49:04 Msec=750 True Az=116.85 Ze=15.03 Az status=0009 Ze status=0009 01:49:04 Check angles 01:49:04 SkyScan query 01:49:04 SkyScan query done: ret=0 az=99.495<-6633 ze=-6.03<-12402 Statuses=0009 0009 01:49:04 Msec=1500 True Az=99.495 Ze=-6.03 Az status=0009 Ze status=0009 01:49:05 Check angles 01:49:05 SkyScan query 01:49:05 SkyScan query done: ret=0 az=81.705<-5447 ze=-27.36<-13824 Statuses=0009 0009 01:49:05 Msec=2250 True Az=81.705 Ze=-27.36 Az status=0009 Ze status=0009 01:49:05 Check angles 01:49:05 SkyScan query 01:49:06 SkyScan query done: ret=0 az=63.84<-4256 ze=-38.565<-14571 Statuses=0009 0008 01:49:06 Msec=3000 True Az=63.84 Ze=-38.565 Az status=0009 Ze status=0008 01:49:06 Check angles 01:49:06 SkyScan query 01:49:07 SkyScan query done: ret=0 az=46.02<-3068 ze=-38.52<-14568 Statuses=0009 0008 01:49:07 Msec=3750 True Az=46.02 Ze=-38.52 Az status=0009 Ze status=0008 01:49:07 Check angles 01:49:07 SkyScan query 01:49:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:49:08 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 01:49:08 Message to Master queued w/err=0: serial=49210 error=0 01:49:13 Received message from Master: op=Filter serial=49211 01:49:13 Color wheel filter change from 0 to 0 01:49:13 FLIGetFilterPos err=0 currentPosition=0 01:49:13 FLIGetStepsRemaining err=0 RemainingSteps=0 01:49:13 Filter is already there-color wheel unchanged 01:49:13 Received message from Master: op=Shutter serial=49212 01:49:13 Shutter LASER close 01:49:13 Received message from Camera: op=State serial=49214 01:49:13 GetSingleValue result=40 Value=cccccccc 01:49:13 SkyScan query 01:49:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:49:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:49:13 Parameters OK 01:49:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:49:13 Set A/D data flow result=40 01:49:13 Set A/D channel type result=40 01:49:13 Set A/D encoding result=40 01:49:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:49:13 Set channel filter=0.000000e+000 result=40 01:49:13 Config A/D Result=40 01:49:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:49:13 Get A/D filter: -9.255963e+061 result=40 01:49:13 Get A/D value=-858993460 result=40 01:49:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:49:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:49:13 Parameters OK 01:49:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:49:13 Set A/D data flow result=40 01:49:13 Set A/D channel type result=40 01:49:13 Set A/D encoding result=40 01:49:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:49:13 Set channel filter=0.000000e+000 result=40 01:49:13 Config A/D Result=40 01:49:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:49:13 Get A/D filter: -9.255963e+061 result=40 01:49:13 Get A/D value=-858993460 result=40 01:49:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:49:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:49:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:49:13 Aux= 01:49:13 Message to Camera, serial 49214 queued 01:49:49 Received message from Master: op=PointingHead serial=49226 01:49:49 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:49:49 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:49:50 Point started: ret=0 01:49:50 point_skyscan result=0 01:49:50 Check angles 01:49:50 SkyScan query 01:49:51 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.415<-16561 Statuses=0009 0009 01:49:51 Msec=0 True Az=64.23 Ze=-68.415 Az status=0009 Ze status=0009 01:49:51 Check angles 01:49:51 SkyScan query 01:49:52 SkyScan query done: ret=0 az=81.495<-5433 ze=-89.415<-17961 Statuses=0009 0009 01:49:52 Msec=750 True Az=81.495 Ze=-89.415 Az status=0009 Ze status=0009 01:49:52 Check angles 01:49:52 SkyScan query 01:49:52 SkyScan query done: ret=0 az=99.54<-6636 ze=-110.805<-19387 Statuses=0009 0009 01:49:52 Msec=1500 True Az=99.54 Ze=-110.805 Az status=0009 Ze status=0009 01:49:53 Check angles 01:49:53 SkyScan query 01:49:53 SkyScan query done: ret=0 az=116.985<-7799 ze=-131.715<-20781 Statuses=0009 0009 01:49:53 Msec=2250 True Az=116.985 Ze=-131.715 Az status=0009 Ze status=0009 01:49:53 Check angles 01:49:53 SkyScan query 01:49:54 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 01:49:54 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 01:49:54 Check angles 01:49:54 SkyScan query 01:49:55 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:49:55 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:49:55 Message to Master queued w/err=0: serial=49226 error=0 01:50:00 Received message from Master: op=Filter serial=49227 01:50:00 Color wheel filter change from 0 to 0 01:50:00 FLIGetFilterPos err=0 currentPosition=0 01:50:00 FLIGetStepsRemaining err=0 RemainingSteps=0 01:50:00 Filter is already there-color wheel unchanged 01:50:00 Received message from Master: op=Shutter serial=49228 01:50:00 Shutter LASER close 01:50:00 Received message from Camera: op=State serial=49230 01:50:00 GetSingleValue result=40 Value=cccccccc 01:50:00 SkyScan query 01:50:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:50:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:50:00 Parameters OK 01:50:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:50:00 Set A/D data flow result=40 01:50:00 Set A/D channel type result=40 01:50:00 Set A/D encoding result=40 01:50:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:50:00 Set channel filter=0.000000e+000 result=40 01:50:00 Config A/D Result=40 01:50:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:50:00 Get A/D filter: -9.255963e+061 result=40 01:50:00 Get A/D value=-858993460 result=40 01:50:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:50:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:50:00 Parameters OK 01:50:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:50:00 Set A/D data flow result=40 01:50:00 Set A/D channel type result=40 01:50:00 Set A/D encoding result=40 01:50:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:50:00 Set channel filter=0.000000e+000 result=40 01:50:00 Config A/D Result=40 01:50:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:50:00 Get A/D filter: -9.255963e+061 result=40 01:50:00 Get A/D value=-858993460 result=40 01:50:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:50:00 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:50:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:50:00 Aux= 01:50:00 Message to Camera, serial 49230 queued 01:50:37 Received message from Master: op=PointingHead serial=49243 01:50:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:50:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:50:38 Point started: ret=0 01:50:38 point_skyscan result=0 01:50:38 Check angles 01:50:38 SkyScan query 01:50:39 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.045<-23403 Statuses=0009 0009 01:50:39 Msec=0 True Az=113.01 Ze=-171.045 Az status=0009 Ze status=0009 01:50:39 Check angles 01:50:39 SkyScan query 01:50:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:50:40 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:50:40 Message to Master queued w/err=0: serial=49243 error=0 01:50:45 Received message from Master: op=Filter serial=49244 01:50:45 Color wheel filter change from 0 to 0 01:50:45 FLIGetFilterPos err=0 currentPosition=0 01:50:45 FLIGetStepsRemaining err=0 RemainingSteps=0 01:50:45 Filter is already there-color wheel unchanged 01:50:45 Received message from Master: op=Shutter serial=49245 01:50:45 Shutter LASER open 01:50:45 Received message from Camera: op=State serial=49247 01:50:45 GetSingleValue result=40 Value=cccccccc 01:50:45 SkyScan query 01:50:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:50:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:50:46 Parameters OK 01:50:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:50:46 Set A/D data flow result=40 01:50:46 Set A/D channel type result=40 01:50:46 Set A/D encoding result=40 01:50:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:50:46 Set channel filter=0.000000e+000 result=40 01:50:46 Config A/D Result=40 01:50:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:50:46 Get A/D filter: -9.255963e+061 result=40 01:50:46 Get A/D value=-858993460 result=40 01:50:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:50:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:50:46 Parameters OK 01:50:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:50:46 Set A/D data flow result=40 01:50:46 Set A/D channel type result=40 01:50:46 Set A/D encoding result=40 01:50:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:50:46 Set channel filter=0.000000e+000 result=40 01:50:46 Config A/D Result=40 01:50:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:50:46 Get A/D filter: -9.255963e+061 result=40 01:50:46 Get A/D value=-858993460 result=40 01:50:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:50:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:50:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:50:46 Aux= 01:50:46 Message to Camera, serial 49247 queued 01:50:54 Received message from Master: op=Shutter serial=49257 01:50:54 Shutter LASER close 01:50:55 Received message from Master: op=PointingHead serial=49261 01:50:55 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:50:55 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:50:55 Point started: ret=0 01:50:55 point_skyscan result=0 01:50:56 Check angles 01:50:56 SkyScan query 01:50:56 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.785<-21519 Statuses=0009 0009 01:50:56 Msec=0 True Az=136.215 Ze=-142.785 Az status=0009 Ze status=0009 01:50:57 Check angles 01:50:57 SkyScan query 01:50:57 SkyScan query done: ret=0 az=153.78<-10252 ze=-121.95<-20130 Statuses=0009 0009 01:50:57 Msec=750 True Az=153.78 Ze=-121.95 Az status=0009 Ze status=0009 01:50:57 Check angles 01:50:57 SkyScan query 01:50:58 SkyScan query done: ret=0 az=171.225<-11415 ze=-100.98<-18732 Statuses=0009 0009 01:50:58 Msec=1500 True Az=171.225 Ze=-100.98 Az status=0009 Ze status=0009 01:50:58 Check angles 01:50:58 SkyScan query 01:50:59 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.055<-17337 Statuses=0008 0009 01:50:59 Msec=2250 True Az=176.025 Ze=-80.055 Az status=0008 Ze status=0009 01:50:59 Check angles 01:50:59 SkyScan query 01:50:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.085<-15939 Statuses=0008 0009 01:50:59 Msec=3000 True Az=175.995 Ze=-59.085 Az status=0008 Ze status=0009 01:51:00 Check angles 01:51:00 SkyScan query 01:51:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:51:00 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:51:00 Message to Master queued w/err=0: serial=49261 error=0 01:51:05 Received message from Master: op=Filter serial=49262 01:51:05 Color wheel filter change from 0 to 0 01:51:05 FLIGetFilterPos err=0 currentPosition=0 01:51:05 FLIGetStepsRemaining err=0 RemainingSteps=0 01:51:05 Filter is already there-color wheel unchanged 01:51:05 Received message from Master: op=Shutter serial=49263 01:51:05 Shutter LASER close 01:51:06 Received message from Camera: op=State serial=49265 01:51:06 GetSingleValue result=40 Value=cccccccc 01:51:06 SkyScan query 01:51:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:51:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:51:06 Parameters OK 01:51:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:51:06 Set A/D data flow result=40 01:51:06 Set A/D channel type result=40 01:51:06 Set A/D encoding result=40 01:51:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:51:06 Set channel filter=0.000000e+000 result=40 01:51:06 Config A/D Result=40 01:51:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:51:06 Get A/D filter: -9.255963e+061 result=40 01:51:06 Get A/D value=-858993460 result=40 01:51:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:51:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:51:06 Parameters OK 01:51:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:51:06 Set A/D data flow result=40 01:51:06 Set A/D channel type result=40 01:51:06 Set A/D encoding result=40 01:51:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:51:06 Set channel filter=0.000000e+000 result=40 01:51:06 Config A/D Result=40 01:51:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:51:06 Get A/D filter: -9.255963e+061 result=40 01:51:06 Get A/D value=-858993460 result=40 01:51:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:51:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:51:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:51:06 Aux= 01:51:06 Message to Camera, serial 49265 queued 01:51:43 Received message from Master: op=PointingHead serial=49278 01:51:43 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:51:43 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:51:43 Point started: ret=0 01:51:43 point_skyscan result=0 01:51:44 Check angles 01:51:44 SkyScan query 01:51:45 SkyScan query done: ret=0 az=152.685<-10179 ze=-21.33<-13422 Statuses=0009 0009 01:51:45 Msec=0 True Az=152.685 Ze=-21.33 Az status=0009 Ze status=0009 01:51:45 Check angles 01:51:45 SkyScan query 01:51:45 SkyScan query done: ret=0 az=135.225<-9015 ze=-0.36<-12024 Statuses=0009 0009 01:51:45 Msec=750 True Az=135.225 Ze=-0.36 Az status=0009 Ze status=0009 01:51:46 Check angles 01:51:46 SkyScan query 01:51:46 SkyScan query done: ret=0 az=117.225<-7815 ze=21.03<-10598 Statuses=0009 0009 01:51:46 Msec=1500 True Az=117.225 Ze=21.03 Az status=0009 Ze status=0009 01:51:46 Check angles 01:51:46 SkyScan query 01:51:47 SkyScan query done: ret=0 az=99.945<-6663 ze=41.985<-9201 Statuses=0009 0009 01:51:47 Msec=2250 True Az=99.945 Ze=41.985 Az status=0009 Ze status=0009 01:51:47 Check angles 01:51:47 SkyScan query 01:51:48 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 01:51:48 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 01:51:48 Check angles 01:51:48 SkyScan query 01:51:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:51:48 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 01:51:48 Message to Master queued w/err=0: serial=49278 error=0 01:51:53 Received message from Master: op=Filter serial=49279 01:51:53 Color wheel filter change from 0 to 0 01:51:53 FLIGetFilterPos err=0 currentPosition=0 01:51:53 FLIGetStepsRemaining err=0 RemainingSteps=0 01:51:53 Filter is already there-color wheel unchanged 01:51:54 Received message from Master: op=Shutter serial=49280 01:51:54 Shutter LASER close 01:51:54 Received message from Camera: op=State serial=49282 01:51:54 GetSingleValue result=40 Value=cccccccc 01:51:54 SkyScan query 01:51:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:51:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:51:54 Parameters OK 01:51:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:51:54 Set A/D data flow result=40 01:51:54 Set A/D channel type result=40 01:51:54 Set A/D encoding result=40 01:51:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:51:54 Set channel filter=0.000000e+000 result=40 01:51:54 Config A/D Result=40 01:51:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:51:54 Get A/D filter: -9.255963e+061 result=40 01:51:54 Get A/D value=-858993460 result=40 01:51:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:51:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:51:54 Parameters OK 01:51:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:51:54 Set A/D data flow result=40 01:51:54 Set A/D channel type result=40 01:51:54 Set A/D encoding result=40 01:51:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:51:54 Set channel filter=0.000000e+000 result=40 01:51:54 Config A/D Result=40 01:51:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:51:54 Get A/D filter: -9.255963e+061 result=40 01:51:54 Get A/D value=-858993460 result=40 01:51:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:51:54 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:51:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:51:54 Aux= 01:51:54 Message to Camera, serial 49282 queued 01:52:31 Received message from Master: op=PointingHead serial=49295 01:52:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:52:31 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:52:31 Point started: ret=0 01:52:31 point_skyscan result=0 01:52:32 Check angles 01:52:32 SkyScan query 01:52:33 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 01:52:33 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 01:52:33 Check angles 01:52:33 SkyScan query 01:52:33 SkyScan query done: ret=0 az=126.51<-8434 ze=38.505<-9433 Statuses=0009 0008 01:52:33 Msec=750 True Az=126.51 Ze=38.505 Az status=0009 Ze status=0008 01:52:34 Check angles 01:52:34 SkyScan query 01:52:34 SkyScan query done: ret=0 az=143.895<-9593 ze=38.505<-9433 Statuses=0009 0008 01:52:34 Msec=1500 True Az=143.895 Ze=38.505 Az status=0009 Ze status=0008 01:52:34 Check angles 01:52:34 SkyScan query 01:52:35 SkyScan query done: ret=0 az=161.355<-10757 ze=38.505<-9433 Statuses=0009 0008 01:52:35 Msec=2250 True Az=161.355 Ze=38.505 Az status=0009 Ze status=0008 01:52:35 Check angles 01:52:35 SkyScan query 01:52:36 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 01:52:36 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 01:52:36 Check angles 01:52:36 SkyScan query 01:52:36 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:52:36 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:52:36 Message to Master queued w/err=0: serial=49295 error=0 01:52:41 Received message from Master: op=Filter serial=49296 01:52:41 Color wheel filter change from 0 to 0 01:52:41 FLIGetFilterPos err=0 currentPosition=0 01:52:41 FLIGetStepsRemaining err=0 RemainingSteps=0 01:52:41 Filter is already there-color wheel unchanged 01:52:42 Received message from Master: op=Shutter serial=49297 01:52:42 Shutter LASER close 01:52:42 Received message from Camera: op=State serial=49299 01:52:42 GetSingleValue result=40 Value=cccccccc 01:52:42 SkyScan query 01:52:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:52:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:52:42 Parameters OK 01:52:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:52:42 Set A/D data flow result=40 01:52:42 Set A/D channel type result=40 01:52:42 Set A/D encoding result=40 01:52:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:52:42 Set channel filter=0.000000e+000 result=40 01:52:42 Config A/D Result=40 01:52:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:52:42 Get A/D filter: -9.255963e+061 result=40 01:52:42 Get A/D value=-858993460 result=40 01:52:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:52:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:52:42 Parameters OK 01:52:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:52:42 Set A/D data flow result=40 01:52:42 Set A/D channel type result=40 01:52:42 Set A/D encoding result=40 01:52:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:52:42 Set channel filter=0.000000e+000 result=40 01:52:42 Config A/D Result=40 01:52:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:52:42 Get A/D filter: -9.255963e+061 result=40 01:52:42 Get A/D value=-858993460 result=40 01:52:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:52:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:52:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:52:42 Aux= 01:52:42 Message to Camera, serial 49299 queued 01:53:19 Received message from Master: op=PointingHead serial=49312 01:53:19 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:53:19 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:53:19 Point started: ret=0 01:53:19 point_skyscan result=0 01:53:20 Check angles 01:53:20 SkyScan query 01:53:21 SkyScan query done: ret=0 az=152.775<-10185 ze=8.625<-11425 Statuses=0009 0009 01:53:21 Msec=0 True Az=152.775 Ze=8.625 Az status=0009 Ze status=0009 01:53:21 Check angles 01:53:21 SkyScan query 01:53:22 SkyScan query done: ret=0 az=135<-9000 ze=-12.72<-12848 Statuses=0009 0009 01:53:22 Msec=750 True Az=135 Ze=-12.72 Az status=0009 Ze status=0009 01:53:22 Check angles 01:53:22 SkyScan query 01:53:22 SkyScan query done: ret=0 az=117.42<-7828 ze=-33.69<-14246 Statuses=0009 0009 01:53:22 Msec=1500 True Az=117.42 Ze=-33.69 Az status=0009 Ze status=0009 01:53:22 Check angles 01:53:22 SkyScan query 01:53:23 SkyScan query done: ret=0 az=100.11<-6674 ze=-51.57<-15438 Statuses=0009 0009 01:53:23 Msec=2250 True Az=100.11 Ze=-51.57 Az status=0009 Ze status=0009 01:53:23 Check angles 01:53:23 SkyScan query 01:53:24 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 01:53:24 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 01:53:24 Check angles 01:53:24 SkyScan query 01:53:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:53:25 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:53:25 Message to Master queued w/err=0: serial=49312 error=0 01:53:30 Received message from Master: op=Filter serial=49313 01:53:30 Color wheel filter change from 0 to 0 01:53:30 FLIGetFilterPos err=0 currentPosition=0 01:53:30 FLIGetStepsRemaining err=0 RemainingSteps=0 01:53:30 Filter is already there-color wheel unchanged 01:53:30 Received message from Master: op=Shutter serial=49314 01:53:30 Shutter LASER close 01:53:30 Received message from Camera: op=State serial=49316 01:53:30 GetSingleValue result=40 Value=cccccccc 01:53:30 SkyScan query 01:53:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:53:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:53:30 Parameters OK 01:53:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:53:30 Set A/D data flow result=40 01:53:30 Set A/D channel type result=40 01:53:30 Set A/D encoding result=40 01:53:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:53:30 Set channel filter=0.000000e+000 result=40 01:53:30 Config A/D Result=40 01:53:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:53:30 Get A/D filter: -9.255963e+061 result=40 01:53:30 Get A/D value=-858993460 result=40 01:53:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:53:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:53:30 Parameters OK 01:53:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:53:30 Set A/D data flow result=40 01:53:30 Set A/D channel type result=40 01:53:30 Set A/D encoding result=40 01:53:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:53:30 Set channel filter=0.000000e+000 result=40 01:53:30 Config A/D Result=40 01:53:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:53:30 Get A/D filter: -9.255963e+061 result=40 01:53:30 Get A/D value=-858993460 result=40 01:53:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:53:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:53:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:53:30 Aux= 01:53:30 Message to Camera, serial 49316 queued 01:54:07 Received message from Master: op=PointingHead serial=49329 01:54:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:54:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:54:08 Point started: ret=0 01:54:08 point_skyscan result=0 01:54:08 Check angles 01:54:08 SkyScan query 01:54:09 SkyScan query done: ret=0 az=109.035<-7269 ze=-81.345<-17423 Statuses=0009 0009 01:54:09 Msec=0 True Az=109.035 Ze=-81.345 Az status=0009 Ze status=0009 01:54:09 Check angles 01:54:09 SkyScan query 01:54:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.3<-18820 Statuses=0008 0009 01:54:10 Msec=750 True Az=112.995 Ze=-102.3 Az status=0008 Ze status=0009 01:54:10 Check angles 01:54:10 SkyScan query 01:54:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.285<-20219 Statuses=0008 0009 01:54:10 Msec=1500 True Az=112.995 Ze=-123.285 Az status=0008 Ze status=0009 01:54:11 Check angles 01:54:11 SkyScan query 01:54:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.24<-21616 Statuses=0008 0009 01:54:11 Msec=2250 True Az=112.995 Ze=-144.24 Az status=0008 Ze status=0009 01:54:11 Check angles 01:54:11 SkyScan query 01:54:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.6<-23040 Statuses=0008 0009 01:54:12 Msec=3000 True Az=112.995 Ze=-165.6 Az status=0008 Ze status=0009 01:54:12 Check angles 01:54:12 SkyScan query 01:54:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:54:13 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:54:13 Message to Master queued w/err=0: serial=49329 error=0 01:54:18 Received message from Master: op=Filter serial=49330 01:54:18 Color wheel filter change from 0 to 0 01:54:18 FLIGetFilterPos err=0 currentPosition=0 01:54:18 FLIGetStepsRemaining err=0 RemainingSteps=0 01:54:18 Filter is already there-color wheel unchanged 01:54:18 Received message from Master: op=Shutter serial=49331 01:54:18 Shutter LASER open 01:54:18 Received message from Camera: op=State serial=49333 01:54:18 GetSingleValue result=40 Value=cccccccc 01:54:18 SkyScan query 01:54:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:54:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:54:19 Parameters OK 01:54:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:54:19 Set A/D data flow result=40 01:54:19 Set A/D channel type result=40 01:54:19 Set A/D encoding result=40 01:54:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:54:19 Set channel filter=0.000000e+000 result=40 01:54:19 Config A/D Result=40 01:54:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:54:19 Get A/D filter: -9.255963e+061 result=40 01:54:19 Get A/D value=-858993460 result=40 01:54:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:54:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:54:19 Parameters OK 01:54:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:54:19 Set A/D data flow result=40 01:54:19 Set A/D channel type result=40 01:54:19 Set A/D encoding result=40 01:54:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:54:19 Set channel filter=0.000000e+000 result=40 01:54:19 Config A/D Result=40 01:54:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:54:19 Get A/D filter: -9.255963e+061 result=40 01:54:19 Get A/D value=-858993460 result=40 01:54:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:54:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:54:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:54:19 Aux= 01:54:19 Message to Camera, serial 49333 queued 01:54:27 Received message from Master: op=Shutter serial=49343 01:54:27 Shutter LASER close 01:54:27 Received message from Master: op=PointingHead serial=49347 01:54:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:54:27 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:54:28 Point started: ret=0 01:54:28 point_skyscan result=0 01:54:29 Check angles 01:54:29 SkyScan query 01:54:29 SkyScan query done: ret=0 az=90.12<-6008 ze=157.38<-1508 Statuses=0009 0009 01:54:29 Msec=0 True Az=90.12 Ze=157.38 Az status=0009 Ze status=0009 01:54:29 Check angles 01:54:29 SkyScan query 01:54:30 SkyScan query done: ret=0 az=72.63<-4842 ze=136.41<-2906 Statuses=0009 0009 01:54:30 Msec=750 True Az=72.63 Ze=136.41 Az status=0009 Ze status=0009 01:54:30 Check angles 01:54:30 SkyScan query 01:54:31 SkyScan query done: ret=0 az=55.185<-3679 ze=115.5<-4300 Statuses=0009 0009 01:54:31 Msec=1500 True Az=55.185 Ze=115.5 Az status=0009 Ze status=0009 01:54:31 Check angles 01:54:31 SkyScan query 01:54:31 SkyScan query done: ret=0 az=40.86<-2724 ze=94.5<-5700 Statuses=0009 0009 01:54:31 Msec=2250 True Az=40.86 Ze=94.5 Az status=0009 Ze status=0009 01:54:32 Check angles 01:54:32 SkyScan query 01:54:32 SkyScan query done: ret=0 az=40.995<-2733 ze=73.575<-7095 Statuses=0008 0009 01:54:32 Msec=3000 True Az=40.995 Ze=73.575 Az status=0008 Ze status=0009 01:54:32 Check angles 01:54:32 SkyScan query 01:54:33 SkyScan query done: ret=0 az=40.995<-2733 ze=52.935<-8471 Statuses=0008 0009 01:54:33 Msec=3750 True Az=40.995 Ze=52.935 Az status=0008 Ze status=0009 01:54:33 Check angles 01:54:33 SkyScan query 01:54:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:54:34 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:54:34 Message to Master queued w/err=0: serial=49347 error=0 01:54:39 Received message from Master: op=Filter serial=49348 01:54:39 Color wheel filter change from 0 to 0 01:54:39 FLIGetFilterPos err=0 currentPosition=0 01:54:39 FLIGetStepsRemaining err=0 RemainingSteps=0 01:54:39 Filter is already there-color wheel unchanged 01:54:39 Received message from Master: op=Shutter serial=49349 01:54:39 Shutter LASER close 01:54:39 Received message from Camera: op=State serial=49351 01:54:39 GetSingleValue result=40 Value=cccccccc 01:54:39 SkyScan query 01:54:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:54:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:54:40 Parameters OK 01:54:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:54:40 Set A/D data flow result=40 01:54:40 Set A/D channel type result=40 01:54:40 Set A/D encoding result=40 01:54:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:54:40 Set channel filter=0.000000e+000 result=40 01:54:40 Config A/D Result=40 01:54:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:54:40 Get A/D filter: -9.255963e+061 result=40 01:54:40 Get A/D value=-858993460 result=40 01:54:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:54:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:54:40 Parameters OK 01:54:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:54:40 Set A/D data flow result=40 01:54:40 Set A/D channel type result=40 01:54:40 Set A/D encoding result=40 01:54:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:54:40 Set channel filter=0.000000e+000 result=40 01:54:40 Config A/D Result=40 01:54:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:54:40 Get A/D filter: -9.255963e+061 result=40 01:54:40 Get A/D value=-858993460 result=40 01:54:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:54:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:54:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:54:40 Aux= 01:54:40 Message to Camera, serial 49351 queued 01:55:15 Received message from Master: op=PointingHead serial=49363 01:55:15 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 01:55:15 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 01:55:16 Point started: ret=0 01:55:16 point_skyscan result=0 01:55:17 Check angles 01:55:17 SkyScan query 01:55:17 SkyScan query done: ret=0 az=63.81<-4254 ze=66.555<-7563 Statuses=0009 0008 01:55:17 Msec=0 True Az=63.81 Ze=66.555 Az status=0009 Ze status=0008 01:55:17 Check angles 01:55:17 SkyScan query 01:55:18 SkyScan query done: ret=0 az=81.6<-5440 ze=66.51<-7566 Statuses=0009 0008 01:55:18 Msec=750 True Az=81.6 Ze=66.51 Az status=0009 Ze status=0008 01:55:18 Check angles 01:55:18 SkyScan query 01:55:19 SkyScan query done: ret=0 az=99.69<-6646 ze=66.495<-7567 Statuses=0009 0008 01:55:19 Msec=1500 True Az=99.69 Ze=66.495 Az status=0009 Ze status=0008 01:55:19 Check angles 01:55:19 SkyScan query 01:55:19 SkyScan query done: ret=0 az=117.165<-7811 ze=66.495<-7567 Statuses=0009 0008 01:55:19 Msec=2250 True Az=117.165 Ze=66.495 Az status=0009 Ze status=0008 01:55:20 Check angles 01:55:20 SkyScan query 01:55:20 SkyScan query done: ret=0 az=134.58<-8972 ze=66.495<-7567 Statuses=0009 0008 01:55:20 Msec=3000 True Az=134.58 Ze=66.495 Az status=0009 Ze status=0008 01:55:20 Check angles 01:55:20 SkyScan query 01:55:21 SkyScan query done: ret=0 az=152.085<-10139 ze=66.495<-7567 Statuses=0009 0008 01:55:21 Msec=3750 True Az=152.085 Ze=66.495 Az status=0009 Ze status=0008 01:55:21 Check angles 01:55:21 SkyScan query 01:55:22 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 01:55:22 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 01:55:22 Message to Master queued w/err=0: serial=49363 error=0 01:55:27 Received message from Master: op=Filter serial=49364 01:55:27 Color wheel filter change from 0 to 0 01:55:27 FLIGetFilterPos err=0 currentPosition=0 01:55:27 FLIGetStepsRemaining err=0 RemainingSteps=0 01:55:27 Filter is already there-color wheel unchanged 01:55:27 Received message from Master: op=Shutter serial=49365 01:55:27 Shutter LASER close 01:55:27 Received message from Camera: op=State serial=49367 01:55:27 GetSingleValue result=40 Value=cccccccc 01:55:27 SkyScan query 01:55:27 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:55:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:55:27 Parameters OK 01:55:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:55:27 Set A/D data flow result=40 01:55:27 Set A/D channel type result=40 01:55:27 Set A/D encoding result=40 01:55:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:55:27 Set channel filter=0.000000e+000 result=40 01:55:27 Config A/D Result=40 01:55:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:55:27 Get A/D filter: -9.255963e+061 result=40 01:55:27 Get A/D value=-858993460 result=40 01:55:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:55:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:55:27 Parameters OK 01:55:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:55:27 Set A/D data flow result=40 01:55:27 Set A/D channel type result=40 01:55:27 Set A/D encoding result=40 01:55:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:55:27 Set channel filter=0.000000e+000 result=40 01:55:27 Config A/D Result=40 01:55:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:55:27 Get A/D filter: -9.255963e+061 result=40 01:55:27 Get A/D value=-858993460 result=40 01:55:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:55:27 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:55:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:55:27 Aux= 01:55:27 Message to Camera, serial 49367 queued [UTC 2018-12-11 01:55:54] 01:56:04 Received message from Master: op=PointingHead serial=49380 01:56:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:56:04 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:56:05 Point started: ret=0 01:56:05 point_skyscan result=0 01:56:05 Check angles 01:56:05 SkyScan query 01:56:06 SkyScan query done: ret=0 az=135.12<-9008 ze=36.84<-9544 Statuses=0009 0009 01:56:06 Msec=0 True Az=135.12 Ze=36.84 Az status=0009 Ze status=0009 01:56:06 Check angles 01:56:06 SkyScan query 01:56:07 SkyScan query done: ret=0 az=117.27<-7818 ze=15.48<-10968 Statuses=0009 0009 01:56:07 Msec=750 True Az=117.27 Ze=15.48 Az status=0009 Ze status=0009 01:56:07 Check angles 01:56:07 SkyScan query 01:56:07 SkyScan query done: ret=0 az=99.48<-6632 ze=-5.91<-12394 Statuses=0009 0009 01:56:07 Msec=1500 True Az=99.48 Ze=-5.91 Az status=0009 Ze status=0009 01:56:08 Check angles 01:56:08 SkyScan query 01:56:08 SkyScan query done: ret=0 az=82.035<-5469 ze=-26.88<-13792 Statuses=0009 0009 01:56:08 Msec=2250 True Az=82.035 Ze=-26.88 Az status=0009 Ze status=0009 01:56:08 Check angles 01:56:08 SkyScan query 01:56:09 SkyScan query done: ret=0 az=64.185<-4279 ze=-38.565<-14571 Statuses=0009 0008 01:56:09 Msec=3000 True Az=64.185 Ze=-38.565 Az status=0009 Ze status=0008 01:56:09 Check angles 01:56:09 SkyScan query 01:56:10 SkyScan query done: ret=0 az=46.41<-3094 ze=-38.535<-14569 Statuses=0009 0008 01:56:10 Msec=3750 True Az=46.41 Ze=-38.535 Az status=0009 Ze status=0008 01:56:10 Check angles 01:56:10 SkyScan query 01:56:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:56:11 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 01:56:11 Message to Master queued w/err=0: serial=49380 error=0 01:56:16 Received message from Master: op=Filter serial=49381 01:56:16 Color wheel filter change from 0 to 0 01:56:16 FLIGetFilterPos err=0 currentPosition=0 01:56:16 FLIGetStepsRemaining err=0 RemainingSteps=0 01:56:16 Filter is already there-color wheel unchanged 01:56:16 Received message from Master: op=Shutter serial=49382 01:56:16 Shutter LASER close 01:56:16 Received message from Camera: op=State serial=49384 01:56:16 GetSingleValue result=40 Value=cccccccc 01:56:16 SkyScan query 01:56:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:56:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:56:16 Parameters OK 01:56:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:56:16 Set A/D data flow result=40 01:56:16 Set A/D channel type result=40 01:56:16 Set A/D encoding result=40 01:56:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:56:16 Set channel filter=0.000000e+000 result=40 01:56:16 Config A/D Result=40 01:56:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:56:16 Get A/D filter: -9.255963e+061 result=40 01:56:16 Get A/D value=-858993460 result=40 01:56:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:56:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:56:16 Parameters OK 01:56:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:56:16 Set A/D data flow result=40 01:56:16 Set A/D channel type result=40 01:56:16 Set A/D encoding result=40 01:56:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:56:16 Set channel filter=0.000000e+000 result=40 01:56:16 Config A/D Result=40 01:56:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:56:16 Get A/D filter: -9.255963e+061 result=40 01:56:16 Get A/D value=-858993460 result=40 01:56:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:56:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:56:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:56:16 Aux= 01:56:16 Message to Camera, serial 49384 queued 01:56:53 Received message from Master: op=PointingHead serial=49397 01:56:53 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:56:53 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:56:53 Point started: ret=0 01:56:53 point_skyscan result=0 01:56:54 Check angles 01:56:54 SkyScan query 01:56:55 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.505<-16567 Statuses=0009 0009 01:56:55 Msec=0 True Az=64.245 Ze=-68.505 Az status=0009 Ze status=0009 01:56:55 Check angles 01:56:55 SkyScan query 01:56:56 SkyScan query done: ret=0 az=82.02<-5468 ze=-89.925<-17995 Statuses=0009 0009 01:56:56 Msec=750 True Az=82.02 Ze=-89.925 Az status=0009 Ze status=0009 01:56:56 Check angles 01:56:56 SkyScan query 01:56:56 SkyScan query done: ret=0 az=99.675<-6645 ze=-110.895<-19393 Statuses=0009 0009 01:56:56 Msec=1500 True Az=99.675 Ze=-110.895 Az status=0009 Ze status=0009 01:56:57 Check angles 01:56:57 SkyScan query 01:56:57 SkyScan query done: ret=0 az=117.12<-7808 ze=-131.79<-20786 Statuses=0009 0009 01:56:57 Msec=2250 True Az=117.12 Ze=-131.79 Az status=0009 Ze status=0009 01:56:57 Check angles 01:56:57 SkyScan query 01:56:58 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 01:56:58 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 01:56:58 Check angles 01:56:58 SkyScan query 01:56:59 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:56:59 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:56:59 Message to Master queued w/err=0: serial=49397 error=0 01:57:04 Received message from Master: op=Filter serial=49398 01:57:04 Color wheel filter change from 0 to 0 01:57:04 FLIGetFilterPos err=0 currentPosition=0 01:57:04 FLIGetStepsRemaining err=0 RemainingSteps=0 01:57:04 Filter is already there-color wheel unchanged 01:57:04 Received message from Master: op=Shutter serial=49399 01:57:04 Shutter LASER close 01:57:04 Received message from Camera: op=State serial=49401 01:57:04 GetSingleValue result=40 Value=cccccccc 01:57:04 SkyScan query 01:57:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:57:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:57:04 Parameters OK 01:57:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:57:04 Set A/D data flow result=40 01:57:04 Set A/D channel type result=40 01:57:04 Set A/D encoding result=40 01:57:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:57:04 Set channel filter=0.000000e+000 result=40 01:57:04 Config A/D Result=40 01:57:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:57:04 Get A/D filter: -9.255963e+061 result=40 01:57:04 Get A/D value=-858993460 result=40 01:57:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:57:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:57:04 Parameters OK 01:57:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:57:04 Set A/D data flow result=40 01:57:04 Set A/D channel type result=40 01:57:04 Set A/D encoding result=40 01:57:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:57:04 Set channel filter=0.000000e+000 result=40 01:57:04 Config A/D Result=40 01:57:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:57:04 Get A/D filter: -9.255963e+061 result=40 01:57:04 Get A/D value=-858993460 result=40 01:57:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:57:04 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:57:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:57:04 Aux= 01:57:04 Message to Camera, serial 49401 queued 01:57:41 Received message from Master: op=PointingHead serial=49414 01:57:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:57:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:57:42 Point started: ret=0 01:57:42 point_skyscan result=0 01:57:42 Check angles 01:57:42 SkyScan query 01:57:43 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.045<-23403 Statuses=0009 0009 01:57:43 Msec=0 True Az=113.01 Ze=-171.045 Az status=0009 Ze status=0009 01:57:43 Check angles 01:57:43 SkyScan query 01:57:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:57:44 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:57:44 Message to Master queued w/err=0: serial=49414 error=0 01:57:49 Received message from Master: op=Filter serial=49415 01:57:49 Color wheel filter change from 0 to 0 01:57:49 FLIGetFilterPos err=0 currentPosition=0 01:57:49 FLIGetStepsRemaining err=0 RemainingSteps=0 01:57:49 Filter is already there-color wheel unchanged 01:57:49 Received message from Master: op=Shutter serial=49416 01:57:49 Shutter LASER open 01:57:49 Received message from Camera: op=State serial=49418 01:57:49 GetSingleValue result=40 Value=cccccccc 01:57:49 SkyScan query 01:57:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:57:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:57:50 Parameters OK 01:57:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:57:50 Set A/D data flow result=40 01:57:50 Set A/D channel type result=40 01:57:50 Set A/D encoding result=40 01:57:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:57:50 Set channel filter=0.000000e+000 result=40 01:57:50 Config A/D Result=40 01:57:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:57:50 Get A/D filter: -9.255963e+061 result=40 01:57:50 Get A/D value=-858993460 result=40 01:57:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:57:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:57:50 Parameters OK 01:57:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:57:50 Set A/D data flow result=40 01:57:50 Set A/D channel type result=40 01:57:50 Set A/D encoding result=40 01:57:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:57:50 Set channel filter=0.000000e+000 result=40 01:57:50 Config A/D Result=40 01:57:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:57:50 Get A/D filter: -9.255963e+061 result=40 01:57:50 Get A/D value=-858993460 result=40 01:57:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:57:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:57:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:57:50 Aux= 01:57:50 Message to Camera, serial 49418 queued 01:57:58 Received message from Master: op=Shutter serial=49428 01:57:58 Shutter LASER close 01:57:59 Received message from Master: op=PointingHead serial=49432 01:57:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:57:59 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:57:59 Point started: ret=0 01:57:59 point_skyscan result=0 01:58:00 Check angles 01:58:00 SkyScan query 01:58:00 SkyScan query done: ret=0 az=136.14<-9076 ze=-142.995<-21533 Statuses=0009 0009 01:58:00 Msec=0 True Az=136.14 Ze=-142.995 Az status=0009 Ze status=0009 01:58:00 Check angles 01:58:00 SkyScan query 01:58:01 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.01<-20134 Statuses=0009 0009 01:58:01 Msec=750 True Az=153.615 Ze=-122.01 Az status=0009 Ze status=0009 01:58:01 Check angles 01:58:01 SkyScan query 01:58:02 SkyScan query done: ret=0 az=171.255<-11417 ze=-101.115<-18741 Statuses=0009 0009 01:58:02 Msec=1500 True Az=171.255 Ze=-101.115 Az status=0009 Ze status=0009 01:58:02 Check angles 01:58:02 SkyScan query 01:58:03 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.145<-17343 Statuses=0008 0009 01:58:03 Msec=2250 True Az=176.025 Ze=-80.145 Az status=0008 Ze status=0009 01:58:03 Check angles 01:58:03 SkyScan query 01:58:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.19<-15946 Statuses=0008 0009 01:58:03 Msec=3000 True Az=175.995 Ze=-59.19 Az status=0008 Ze status=0009 01:58:03 Check angles 01:58:03 SkyScan query 01:58:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:58:04 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:58:04 Message to Master queued w/err=0: serial=49432 error=0 01:58:09 Received message from Master: op=Filter serial=49433 01:58:09 Color wheel filter change from 0 to 0 01:58:09 FLIGetFilterPos err=0 currentPosition=0 01:58:09 FLIGetStepsRemaining err=0 RemainingSteps=0 01:58:09 Filter is already there-color wheel unchanged 01:58:09 Received message from Master: op=Shutter serial=49434 01:58:09 Shutter LASER close 01:58:09 Received message from Camera: op=State serial=49436 01:58:09 GetSingleValue result=40 Value=cccccccc 01:58:09 SkyScan query 01:58:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:58:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:58:10 Parameters OK 01:58:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:58:10 Set A/D data flow result=40 01:58:10 Set A/D channel type result=40 01:58:10 Set A/D encoding result=40 01:58:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:58:10 Set channel filter=0.000000e+000 result=40 01:58:10 Config A/D Result=40 01:58:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:58:10 Get A/D filter: -9.255963e+061 result=40 01:58:10 Get A/D value=-858993460 result=40 01:58:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:58:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:58:10 Parameters OK 01:58:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:58:10 Set A/D data flow result=40 01:58:10 Set A/D channel type result=40 01:58:10 Set A/D encoding result=40 01:58:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:58:10 Set channel filter=0.000000e+000 result=40 01:58:10 Config A/D Result=40 01:58:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:58:10 Get A/D filter: -9.255963e+061 result=40 01:58:10 Get A/D value=-858993460 result=40 01:58:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:58:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:58:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:58:10 Aux= 01:58:10 Message to Camera, serial 49436 queued 01:58:47 Received message from Master: op=PointingHead serial=49449 01:58:47 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:58:47 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:58:47 Point started: ret=0 01:58:47 point_skyscan result=0 01:58:48 Check angles 01:58:48 SkyScan query 01:58:48 SkyScan query done: ret=0 az=153<-10200 ze=-21.915<-13461 Statuses=0009 0009 01:58:48 Msec=0 True Az=153 Ze=-21.915 Az status=0009 Ze status=0009 01:58:49 Check angles 01:58:49 SkyScan query 01:58:49 SkyScan query done: ret=0 az=135.3<-9020 ze=-0.465<-12031 Statuses=0009 0009 01:58:49 Msec=750 True Az=135.3 Ze=-0.465 Az status=0009 Ze status=0009 01:58:49 Check angles 01:58:49 SkyScan query 01:58:50 SkyScan query done: ret=0 az=117.36<-7824 ze=20.895<-10607 Statuses=0009 0009 01:58:50 Msec=1500 True Az=117.36 Ze=20.895 Az status=0009 Ze status=0009 01:58:50 Check angles 01:58:50 SkyScan query 01:58:51 SkyScan query done: ret=0 az=99.99<-6666 ze=41.865<-9209 Statuses=0009 0009 01:58:51 Msec=2250 True Az=99.99 Ze=41.865 Az status=0009 Ze status=0009 01:58:51 Check angles 01:58:51 SkyScan query 01:58:51 SkyScan query done: ret=0 az=86.04<-5736 ze=51.54<-8564 Statuses=0009 0008 01:58:51 Msec=3000 True Az=86.04 Ze=51.54 Az status=0009 Ze status=0008 01:58:52 Check angles 01:58:52 SkyScan query 01:58:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:58:52 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:58:52 Message to Master queued w/err=0: serial=49449 error=0 01:58:57 Received message from Master: op=Filter serial=49450 01:58:57 Color wheel filter change from 0 to 0 01:58:57 FLIGetFilterPos err=0 currentPosition=0 01:58:57 FLIGetStepsRemaining err=0 RemainingSteps=0 01:58:57 Filter is already there-color wheel unchanged 01:58:57 Received message from Master: op=Shutter serial=49451 01:58:57 Shutter LASER close 01:58:57 Received message from Camera: op=State serial=49453 01:58:57 GetSingleValue result=40 Value=cccccccc 01:58:57 SkyScan query 01:58:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:58:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:58:58 Parameters OK 01:58:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:58:58 Set A/D data flow result=40 01:58:58 Set A/D channel type result=40 01:58:58 Set A/D encoding result=40 01:58:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:58:58 Set channel filter=0.000000e+000 result=40 01:58:58 Config A/D Result=40 01:58:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:58:58 Get A/D filter: -9.255963e+061 result=40 01:58:58 Get A/D value=-858993460 result=40 01:58:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:58:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:58:58 Parameters OK 01:58:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:58:58 Set A/D data flow result=40 01:58:58 Set A/D channel type result=40 01:58:58 Set A/D encoding result=40 01:58:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:58:58 Set channel filter=0.000000e+000 result=40 01:58:58 Config A/D Result=40 01:58:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:58:58 Get A/D filter: -9.255963e+061 result=40 01:58:58 Get A/D value=-858993460 result=40 01:58:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:58:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:58:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:58:58 Aux= 01:58:58 Message to Camera, serial 49453 queued 01:59:35 Received message from Master: op=PointingHead serial=49466 01:59:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:59:35 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:59:35 Point started: ret=0 01:59:35 point_skyscan result=0 01:59:36 Check angles 01:59:36 SkyScan query 01:59:37 SkyScan query done: ret=0 az=108.75<-7250 ze=38.49<-9434 Statuses=0009 0008 01:59:37 Msec=0 True Az=108.75 Ze=38.49 Az status=0009 Ze status=0008 01:59:37 Check angles 01:59:37 SkyScan query 01:59:37 SkyScan query done: ret=0 az=126.345<-8423 ze=38.505<-9433 Statuses=0009 0008 01:59:37 Msec=750 True Az=126.345 Ze=38.505 Az status=0009 Ze status=0008 01:59:37 Check angles 01:59:37 SkyScan query 01:59:38 SkyScan query done: ret=0 az=143.82<-9588 ze=38.505<-9433 Statuses=0009 0008 01:59:38 Msec=1500 True Az=143.82 Ze=38.505 Az status=0009 Ze status=0008 01:59:38 Check angles 01:59:38 SkyScan query 01:59:39 SkyScan query done: ret=0 az=161.115<-10741 ze=38.505<-9433 Statuses=0009 0008 01:59:39 Msec=2250 True Az=161.115 Ze=38.505 Az status=0009 Ze status=0008 01:59:39 Check angles 01:59:39 SkyScan query 01:59:40 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 01:59:40 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 01:59:40 Check angles 01:59:40 SkyScan query 01:59:40 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:59:40 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:59:40 Message to Master queued w/err=0: serial=49466 error=0 01:59:45 Received message from Master: op=Filter serial=49467 01:59:45 Color wheel filter change from 0 to 0 01:59:45 FLIGetFilterPos err=0 currentPosition=0 01:59:45 FLIGetStepsRemaining err=0 RemainingSteps=0 01:59:45 Filter is already there-color wheel unchanged 01:59:46 Received message from Master: op=Shutter serial=49468 01:59:46 Shutter LASER close 01:59:46 Received message from Camera: op=State serial=49470 01:59:46 GetSingleValue result=40 Value=cccccccc 01:59:46 SkyScan query 01:59:46 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:59:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:59:46 Parameters OK 01:59:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:59:46 Set A/D data flow result=40 01:59:46 Set A/D channel type result=40 01:59:46 Set A/D encoding result=40 01:59:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:59:46 Set channel filter=0.000000e+000 result=40 01:59:46 Config A/D Result=40 01:59:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:59:46 Get A/D filter: -9.255963e+061 result=40 01:59:46 Get A/D value=-858993460 result=40 01:59:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:59:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:59:46 Parameters OK 01:59:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:59:46 Set A/D data flow result=40 01:59:46 Set A/D channel type result=40 01:59:46 Set A/D encoding result=40 01:59:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:59:46 Set channel filter=0.000000e+000 result=40 01:59:46 Config A/D Result=40 01:59:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:59:46 Get A/D filter: -9.255963e+061 result=40 01:59:46 Get A/D value=-858993460 result=40 01:59:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:59:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:59:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:59:46 Aux= 01:59:46 Message to Camera, serial 49470 queued 02:00:23 Received message from Master: op=PointingHead serial=49483 02:00:23 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:00:23 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:00:23 Point started: ret=0 02:00:23 point_skyscan result=0 02:00:24 Check angles 02:00:24 SkyScan query 02:00:25 SkyScan query done: ret=0 az=153.12<-10208 ze=8.88<-11408 Statuses=0009 0009 02:00:25 Msec=0 True Az=153.12 Ze=8.88 Az status=0009 Ze status=0009 02:00:25 Check angles 02:00:25 SkyScan query 02:00:25 SkyScan query done: ret=0 az=135.75<-9050 ze=-12.06<-12804 Statuses=0009 0009 02:00:25 Msec=750 True Az=135.75 Ze=-12.06 Az status=0009 Ze status=0009 02:00:26 Check angles 02:00:26 SkyScan query 02:00:26 SkyScan query done: ret=0 az=118.095<-7873 ze=-33<-14200 Statuses=0009 0009 02:00:26 Msec=1500 True Az=118.095 Ze=-33 Az status=0009 Ze status=0009 02:00:26 Check angles 02:00:26 SkyScan query 02:00:27 SkyScan query done: ret=0 az=100.605<-6707 ze=-51.495<-15433 Statuses=0009 0009 02:00:27 Msec=2250 True Az=100.605 Ze=-51.495 Az status=0009 Ze status=0009 02:00:27 Check angles 02:00:27 SkyScan query 02:00:28 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 02:00:28 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 02:00:28 Check angles 02:00:28 SkyScan query 02:00:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:00:28 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:00:28 Message to Master queued w/err=0: serial=49483 error=0 02:00:33 Received message from Master: op=Filter serial=49484 02:00:33 Color wheel filter change from 0 to 0 02:00:33 FLIGetFilterPos err=0 currentPosition=0 02:00:33 FLIGetStepsRemaining err=0 RemainingSteps=0 02:00:33 Filter is already there-color wheel unchanged 02:00:34 Received message from Master: op=Shutter serial=49485 02:00:34 Shutter LASER close 02:00:34 Received message from Camera: op=State serial=49487 02:00:34 GetSingleValue result=40 Value=cccccccc 02:00:34 SkyScan query 02:00:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:00:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:00:34 Parameters OK 02:00:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:00:34 Set A/D data flow result=40 02:00:34 Set A/D channel type result=40 02:00:34 Set A/D encoding result=40 02:00:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:00:34 Set channel filter=0.000000e+000 result=40 02:00:34 Config A/D Result=40 02:00:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:00:34 Get A/D filter: -9.255963e+061 result=40 02:00:34 Get A/D value=-858993460 result=40 02:00:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:00:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:00:34 Parameters OK 02:00:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:00:34 Set A/D data flow result=40 02:00:34 Set A/D channel type result=40 02:00:34 Set A/D encoding result=40 02:00:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:00:34 Set channel filter=0.000000e+000 result=40 02:00:34 Config A/D Result=40 02:00:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:00:34 Get A/D filter: -9.255963e+061 result=40 02:00:34 Get A/D value=-858993460 result=40 02:00:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:00:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:00:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:00:34 Aux= 02:00:34 Message to Camera, serial 49487 queued 02:01:11 Received message from Master: op=PointingHead serial=49500 02:01:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:01:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:01:11 Point started: ret=0 02:01:11 point_skyscan result=0 02:01:12 Check angles 02:01:12 SkyScan query 02:01:13 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.6<-17440 Statuses=0009 0009 02:01:13 Msec=0 True Az=109.395 Ze=-81.6 Az status=0009 Ze status=0009 02:01:13 Check angles 02:01:13 SkyScan query 02:01:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.555<-18837 Statuses=0008 0009 02:01:14 Msec=750 True Az=112.995 Ze=-102.555 Az status=0008 Ze status=0009 02:01:14 Check angles 02:01:14 SkyScan query 02:01:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.525<-20235 Statuses=0008 0009 02:01:14 Msec=1500 True Az=112.995 Ze=-123.525 Az status=0008 Ze status=0009 02:01:14 Check angles 02:01:14 SkyScan query 02:01:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.465<-21631 Statuses=0008 0009 02:01:15 Msec=2250 True Az=112.995 Ze=-144.465 Az status=0008 Ze status=0009 02:01:15 Check angles 02:01:15 SkyScan query 02:01:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.42<-23028 Statuses=0008 0009 02:01:16 Msec=3000 True Az=112.995 Ze=-165.42 Az status=0008 Ze status=0009 02:01:16 Check angles 02:01:16 SkyScan query 02:01:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:01:17 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:01:17 Message to Master queued w/err=0: serial=49500 error=0 02:01:22 Received message from Master: op=Filter serial=49501 02:01:22 Color wheel filter change from 0 to 0 02:01:22 FLIGetFilterPos err=0 currentPosition=0 02:01:22 FLIGetStepsRemaining err=0 RemainingSteps=0 02:01:22 Filter is already there-color wheel unchanged 02:01:22 Received message from Master: op=Shutter serial=49502 02:01:22 Shutter LASER open 02:01:22 Received message from Camera: op=State serial=49504 02:01:22 GetSingleValue result=40 Value=cccccccc 02:01:22 SkyScan query 02:01:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:01:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:01:22 Parameters OK 02:01:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:01:22 Set A/D data flow result=40 02:01:22 Set A/D channel type result=40 02:01:22 Set A/D encoding result=40 02:01:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:01:22 Set channel filter=0.000000e+000 result=40 02:01:22 Config A/D Result=40 02:01:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:01:22 Get A/D filter: -9.255963e+061 result=40 02:01:22 Get A/D value=-858993460 result=40 02:01:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:01:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:01:22 Parameters OK 02:01:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:01:22 Set A/D data flow result=40 02:01:22 Set A/D channel type result=40 02:01:22 Set A/D encoding result=40 02:01:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:01:22 Set channel filter=0.000000e+000 result=40 02:01:22 Config A/D Result=40 02:01:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:01:22 Get A/D filter: -9.255963e+061 result=40 02:01:22 Get A/D value=-858993460 result=40 02:01:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:01:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:01:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:01:22 Aux= 02:01:22 Message to Camera, serial 49504 queued 02:01:31 Received message from Master: op=Shutter serial=49514 02:01:31 Shutter LASER close 02:01:31 Received message from Master: op=PointingHead serial=49518 02:01:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:01:31 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:01:32 Point started: ret=0 02:01:32 point_skyscan result=0 02:01:32 Check angles 02:01:32 SkyScan query 02:01:33 SkyScan query done: ret=0 az=89.685<-5979 ze=157.005<-1533 Statuses=0009 0009 02:01:33 Msec=0 True Az=89.685 Ze=157.005 Az status=0009 Ze status=0009 02:01:33 Check angles 02:01:33 SkyScan query 02:01:34 SkyScan query done: ret=0 az=72.045<-4803 ze=136.05<-2930 Statuses=0009 0009 02:01:34 Msec=750 True Az=72.045 Ze=136.05 Az status=0009 Ze status=0009 02:01:34 Check angles 02:01:34 SkyScan query 02:01:34 SkyScan query done: ret=0 az=54.915<-3661 ze=115.05<-4330 Statuses=0009 0009 02:01:34 Msec=1500 True Az=54.915 Ze=115.05 Az status=0009 Ze status=0009 02:01:35 Check angles 02:01:35 SkyScan query 02:01:35 SkyScan query done: ret=0 az=40.92<-2728 ze=93.705<-5753 Statuses=0009 0009 02:01:35 Msec=2250 True Az=40.92 Ze=93.705 Az status=0009 Ze status=0009 02:01:35 Check angles 02:01:35 SkyScan query 02:01:36 SkyScan query done: ret=0 az=40.995<-2733 ze=72.69<-7154 Statuses=0008 0009 02:01:36 Msec=3000 True Az=40.995 Ze=72.69 Az status=0008 Ze status=0009 02:01:36 Check angles 02:01:36 SkyScan query 02:01:37 SkyScan query done: ret=0 az=40.995<-2733 ze=52.185<-8521 Statuses=0008 0009 02:01:37 Msec=3750 True Az=40.995 Ze=52.185 Az status=0008 Ze status=0009 02:01:37 Check angles 02:01:37 SkyScan query 02:01:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:01:38 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:01:38 Message to Master queued w/err=0: serial=49518 error=0 02:01:43 Received message from Master: op=Filter serial=49519 02:01:43 Color wheel filter change from 0 to 0 02:01:43 FLIGetFilterPos err=0 currentPosition=0 02:01:43 FLIGetStepsRemaining err=0 RemainingSteps=0 02:01:43 Filter is already there-color wheel unchanged 02:01:43 Received message from Master: op=Shutter serial=49520 02:01:43 Shutter LASER close 02:01:43 Received message from Camera: op=State serial=49522 02:01:43 GetSingleValue result=40 Value=cccccccc 02:01:43 SkyScan query 02:01:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:01:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:01:43 Parameters OK 02:01:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:01:43 Set A/D data flow result=40 02:01:43 Set A/D channel type result=40 02:01:43 Set A/D encoding result=40 02:01:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:01:43 Set channel filter=0.000000e+000 result=40 02:01:43 Config A/D Result=40 02:01:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:01:43 Get A/D filter: -9.255963e+061 result=40 02:01:43 Get A/D value=-858993460 result=40 02:01:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:01:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:01:43 Parameters OK 02:01:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:01:43 Set A/D data flow result=40 02:01:43 Set A/D channel type result=40 02:01:43 Set A/D encoding result=40 02:01:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:01:43 Set channel filter=0.000000e+000 result=40 02:01:43 Config A/D Result=40 02:01:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:01:43 Get A/D filter: -9.255963e+061 result=40 02:01:43 Get A/D value=-858993460 result=40 02:01:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:01:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:01:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:01:43 Aux= 02:01:43 Message to Camera, serial 49522 queued 02:02:20 Received message from Master: op=PointingHead serial=49535 02:02:20 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 02:02:20 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 02:02:21 Point started: ret=0 02:02:21 point_skyscan result=0 02:02:21 Check angles 02:02:21 SkyScan query 02:02:22 SkyScan query done: ret=0 az=64.185<-4279 ze=66.555<-7563 Statuses=0009 0008 02:02:22 Msec=0 True Az=64.185 Ze=66.555 Az status=0009 Ze status=0008 02:02:22 Check angles 02:02:22 SkyScan query 02:02:23 SkyScan query done: ret=0 az=82.035<-5469 ze=66.51<-7566 Statuses=0009 0008 02:02:23 Msec=750 True Az=82.035 Ze=66.51 Az status=0009 Ze status=0008 02:02:23 Check angles 02:02:23 SkyScan query 02:02:23 SkyScan query done: ret=0 az=99.45<-6630 ze=66.495<-7567 Statuses=0009 0008 02:02:23 Msec=1500 True Az=99.45 Ze=66.495 Az status=0009 Ze status=0008 02:02:24 Check angles 02:02:24 SkyScan query 02:02:24 SkyScan query done: ret=0 az=116.91<-7794 ze=66.495<-7567 Statuses=0009 0008 02:02:24 Msec=2250 True Az=116.91 Ze=66.495 Az status=0009 Ze status=0008 02:02:24 Check angles 02:02:24 SkyScan query 02:02:25 SkyScan query done: ret=0 az=134.85<-8990 ze=66.495<-7567 Statuses=0009 0008 02:02:25 Msec=3000 True Az=134.85 Ze=66.495 Az status=0009 Ze status=0008 02:02:25 Check angles 02:02:25 SkyScan query 02:02:26 SkyScan query done: ret=0 az=152.355<-10157 ze=66.495<-7567 Statuses=0009 0008 02:02:26 Msec=3750 True Az=152.355 Ze=66.495 Az status=0009 Ze status=0008 02:02:26 Check angles 02:02:26 SkyScan query 02:02:26 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 02:02:26 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 02:02:26 Message to Master queued w/err=0: serial=49535 error=0 02:02:31 Received message from Master: op=Filter serial=49536 02:02:31 Color wheel filter change from 0 to 0 02:02:31 FLIGetFilterPos err=0 currentPosition=0 02:02:31 FLIGetStepsRemaining err=0 RemainingSteps=0 02:02:31 Filter is already there-color wheel unchanged 02:02:32 Received message from Master: op=Shutter serial=49537 02:02:32 Shutter LASER close 02:02:32 Received message from Camera: op=State serial=49539 02:02:32 GetSingleValue result=40 Value=cccccccc 02:02:32 SkyScan query 02:02:32 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:02:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:02:32 Parameters OK 02:02:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:02:32 Set A/D data flow result=40 02:02:32 Set A/D channel type result=40 02:02:32 Set A/D encoding result=40 02:02:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:02:32 Set channel filter=0.000000e+000 result=40 02:02:32 Config A/D Result=40 02:02:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:02:32 Get A/D filter: -9.255963e+061 result=40 02:02:32 Get A/D value=-858993460 result=40 02:02:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:02:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:02:32 Parameters OK 02:02:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:02:32 Set A/D data flow result=40 02:02:32 Set A/D channel type result=40 02:02:32 Set A/D encoding result=40 02:02:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:02:32 Set channel filter=0.000000e+000 result=40 02:02:32 Config A/D Result=40 02:02:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:02:32 Get A/D filter: -9.255963e+061 result=40 02:02:32 Get A/D value=-858993460 result=40 02:02:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:02:32 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:02:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:02:32 Aux= 02:02:32 Message to Camera, serial 49539 queued 02:03:09 Received message from Master: op=PointingHead serial=49552 02:03:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:03:09 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:03:09 Point started: ret=0 02:03:09 point_skyscan result=0 02:03:10 Check angles 02:03:10 SkyScan query 02:03:11 SkyScan query done: ret=0 az=135.12<-9008 ze=36.885<-9541 Statuses=0009 0009 02:03:11 Msec=0 True Az=135.12 Ze=36.885 Az status=0009 Ze status=0009 02:03:11 Check angles 02:03:11 SkyScan query 02:03:12 SkyScan query done: ret=0 az=117.72<-7848 ze=15.96<-10936 Statuses=0009 0009 02:03:12 Msec=750 True Az=117.72 Ze=15.96 Az status=0009 Ze status=0009 02:03:12 Check angles 02:03:12 SkyScan query 02:03:12 SkyScan query done: ret=0 az=100.335<-6689 ze=-5.01<-12334 Statuses=0009 0009 02:03:12 Msec=1500 True Az=100.335 Ze=-5.01 Az status=0009 Ze status=0009 02:03:12 Check angles 02:03:12 SkyScan query 02:03:13 SkyScan query done: ret=0 az=82.485<-5499 ze=-26.355<-13757 Statuses=0009 0009 02:03:13 Msec=2250 True Az=82.485 Ze=-26.355 Az status=0009 Ze status=0009 02:03:13 Check angles 02:03:13 SkyScan query 02:03:14 SkyScan query done: ret=0 az=64.98<-4332 ze=-38.565<-14571 Statuses=0009 0008 02:03:14 Msec=3000 True Az=64.98 Ze=-38.565 Az status=0009 Ze status=0008 02:03:14 Check angles 02:03:14 SkyScan query 02:03:15 SkyScan query done: ret=0 az=47.505<-3167 ze=-38.535<-14569 Statuses=0009 0008 02:03:15 Msec=3750 True Az=47.505 Ze=-38.535 Az status=0009 Ze status=0008 02:03:15 Check angles 02:03:15 SkyScan query 02:03:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:03:15 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 02:03:15 Message to Master queued w/err=0: serial=49552 error=0 02:03:20 Received message from Master: op=Filter serial=49553 02:03:20 Color wheel filter change from 0 to 0 02:03:20 FLIGetFilterPos err=0 currentPosition=0 02:03:20 FLIGetStepsRemaining err=0 RemainingSteps=0 02:03:20 Filter is already there-color wheel unchanged 02:03:20 Received message from Master: op=Shutter serial=49554 02:03:20 Shutter LASER close 02:03:21 Received message from Camera: op=State serial=49556 02:03:21 GetSingleValue result=40 Value=cccccccc 02:03:21 SkyScan query 02:03:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:03:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:03:21 Parameters OK 02:03:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:03:21 Set A/D data flow result=40 02:03:21 Set A/D channel type result=40 02:03:21 Set A/D encoding result=40 02:03:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:03:21 Set channel filter=0.000000e+000 result=40 02:03:21 Config A/D Result=40 02:03:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:03:21 Get A/D filter: -9.255963e+061 result=40 02:03:21 Get A/D value=-858993460 result=40 02:03:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:03:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:03:21 Parameters OK 02:03:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:03:21 Set A/D data flow result=40 02:03:21 Set A/D channel type result=40 02:03:21 Set A/D encoding result=40 02:03:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:03:21 Set channel filter=0.000000e+000 result=40 02:03:21 Config A/D Result=40 02:03:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:03:21 Get A/D filter: -9.255963e+061 result=40 02:03:21 Get A/D value=-858993460 result=40 02:03:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:03:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:03:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:03:21 Aux= 02:03:21 Message to Camera, serial 49556 queued 02:03:58 Received message from Master: op=PointingHead serial=49569 02:03:58 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:03:58 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:03:58 Point started: ret=0 02:03:58 point_skyscan result=0 02:03:59 Check angles 02:03:59 SkyScan query 02:04:00 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.535<-16569 Statuses=0009 0009 02:04:00 Msec=0 True Az=64.23 Ze=-68.535 Az status=0009 Ze status=0009 02:04:00 Check angles 02:04:00 SkyScan query 02:04:00 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.52<-17968 Statuses=0009 0009 02:04:00 Msec=750 True Az=81.615 Ze=-89.52 Az status=0009 Ze status=0009 02:04:01 Check angles 02:04:01 SkyScan query 02:04:01 SkyScan query done: ret=0 az=99.21<-6614 ze=-110.49<-19366 Statuses=0009 0009 02:04:01 Msec=1500 True Az=99.21 Ze=-110.49 Az status=0009 Ze status=0009 02:04:01 Check angles 02:04:01 SkyScan query 02:04:02 SkyScan query done: ret=0 az=116.775<-7785 ze=-131.43<-20762 Statuses=0009 0009 02:04:02 Msec=2250 True Az=116.775 Ze=-131.43 Az status=0009 Ze status=0009 02:04:02 Check angles 02:04:02 SkyScan query 02:04:03 SkyScan query done: ret=0 az=131.16<-8744 ze=-141.54<-21436 Statuses=0009 0008 02:04:03 Msec=3000 True Az=131.16 Ze=-141.54 Az status=0009 Ze status=0008 02:04:03 Check angles 02:04:03 SkyScan query 02:04:03 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:04:03 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:04:03 Message to Master queued w/err=0: serial=49569 error=0 02:04:08 Received message from Master: op=Filter serial=49570 02:04:08 Color wheel filter change from 0 to 0 02:04:08 FLIGetFilterPos err=0 currentPosition=0 02:04:08 FLIGetStepsRemaining err=0 RemainingSteps=0 02:04:08 Filter is already there-color wheel unchanged 02:04:09 Received message from Master: op=Shutter serial=49571 02:04:09 Shutter LASER close 02:04:09 Received message from Camera: op=State serial=49573 02:04:09 GetSingleValue result=40 Value=cccccccc 02:04:09 SkyScan query 02:04:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:04:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:04:09 Parameters OK 02:04:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:04:09 Set A/D data flow result=40 02:04:09 Set A/D channel type result=40 02:04:09 Set A/D encoding result=40 02:04:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:04:09 Set channel filter=0.000000e+000 result=40 02:04:09 Config A/D Result=40 02:04:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:04:09 Get A/D filter: -9.255963e+061 result=40 02:04:09 Get A/D value=-858993460 result=40 02:04:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:04:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:04:09 Parameters OK 02:04:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:04:09 Set A/D data flow result=40 02:04:09 Set A/D channel type result=40 02:04:09 Set A/D encoding result=40 02:04:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:04:09 Set channel filter=0.000000e+000 result=40 02:04:09 Config A/D Result=40 02:04:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:04:09 Get A/D filter: -9.255963e+061 result=40 02:04:09 Get A/D value=-858993460 result=40 02:04:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:04:09 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:04:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:04:09 Aux= 02:04:09 Message to Camera, serial 49573 queued 02:04:46 Received message from Master: op=PointingHead serial=49586 02:04:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:04:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:04:46 Point started: ret=0 02:04:46 point_skyscan result=0 02:04:47 Check angles 02:04:47 SkyScan query 02:04:48 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 02:04:48 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 02:04:48 Check angles 02:04:48 SkyScan query 02:04:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:04:48 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:04:48 Message to Master queued w/err=0: serial=49586 error=0 02:04:53 Received message from Master: op=Filter serial=49587 02:04:53 Color wheel filter change from 0 to 0 02:04:53 FLIGetFilterPos err=0 currentPosition=0 02:04:53 FLIGetStepsRemaining err=0 RemainingSteps=0 02:04:53 Filter is already there-color wheel unchanged 02:04:54 Received message from Master: op=Shutter serial=49588 02:04:54 Shutter LASER open 02:04:54 Received message from Camera: op=State serial=49590 02:04:54 GetSingleValue result=40 Value=cccccccc 02:04:54 SkyScan query 02:04:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:04:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:04:54 Parameters OK 02:04:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:04:54 Set A/D data flow result=40 02:04:54 Set A/D channel type result=40 02:04:54 Set A/D encoding result=40 02:04:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:04:54 Set channel filter=0.000000e+000 result=40 02:04:54 Config A/D Result=40 02:04:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:04:54 Get A/D filter: -9.255963e+061 result=40 02:04:54 Get A/D value=-858993460 result=40 02:04:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:04:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:04:54 Parameters OK 02:04:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:04:54 Set A/D data flow result=40 02:04:54 Set A/D channel type result=40 02:04:54 Set A/D encoding result=40 02:04:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:04:54 Set channel filter=0.000000e+000 result=40 02:04:54 Config A/D Result=40 02:04:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:04:54 Get A/D filter: -9.255963e+061 result=40 02:04:54 Get A/D value=-858993460 result=40 02:04:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:04:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:04:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:04:54 Aux= 02:04:54 Message to Camera, serial 49590 queued 02:05:03 Received message from Master: op=Shutter serial=49600 02:05:03 Shutter LASER close 02:05:03 Received message from Master: op=PointingHead serial=49604 02:05:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:05:03 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:05:04 Point started: ret=0 02:05:04 point_skyscan result=0 02:05:05 Check angles 02:05:05 SkyScan query 02:05:05 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.25<-21550 Statuses=0009 0009 02:05:05 Msec=0 True Az=135.885 Ze=-143.25 Az status=0009 Ze status=0009 02:05:05 Check angles 02:05:05 SkyScan query 02:05:06 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.28<-20152 Statuses=0009 0009 02:05:06 Msec=750 True Az=153.36 Ze=-122.28 Az status=0009 Ze status=0009 02:05:06 Check angles 02:05:06 SkyScan query 02:05:07 SkyScan query done: ret=0 az=170.79<-11386 ze=-101.4<-18760 Statuses=0009 0009 02:05:07 Msec=1500 True Az=170.79 Ze=-101.4 Az status=0009 Ze status=0009 02:05:07 Check angles 02:05:07 SkyScan query 02:05:07 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.98<-17332 Statuses=0008 0009 02:05:07 Msec=2250 True Az=176.025 Ze=-79.98 Az status=0008 Ze status=0009 02:05:08 Check angles 02:05:08 SkyScan query 02:05:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.98<-15932 Statuses=0008 0009 02:05:08 Msec=3000 True Az=175.995 Ze=-58.98 Az status=0008 Ze status=0009 02:05:08 Check angles 02:05:08 SkyScan query 02:05:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 02:05:09 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 02:05:09 Message to Master queued w/err=0: serial=49604 error=0 02:05:14 Received message from Master: op=Filter serial=49605 02:05:14 Color wheel filter change from 0 to 0 02:05:14 FLIGetFilterPos err=0 currentPosition=0 02:05:14 FLIGetStepsRemaining err=0 RemainingSteps=0 02:05:14 Filter is already there-color wheel unchanged 02:05:14 Received message from Master: op=Shutter serial=49606 02:05:14 Shutter LASER close 02:05:14 Received message from Camera: op=State serial=49608 02:05:14 GetSingleValue result=40 Value=cccccccc 02:05:14 SkyScan query 02:05:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:05:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:05:15 Parameters OK 02:05:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:05:15 Set A/D data flow result=40 02:05:15 Set A/D channel type result=40 02:05:15 Set A/D encoding result=40 02:05:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:05:15 Set channel filter=0.000000e+000 result=40 02:05:15 Config A/D Result=40 02:05:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:05:15 Get A/D filter: -9.255963e+061 result=40 02:05:15 Get A/D value=-858993460 result=40 02:05:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:05:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:05:15 Parameters OK 02:05:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:05:15 Set A/D data flow result=40 02:05:15 Set A/D channel type result=40 02:05:15 Set A/D encoding result=40 02:05:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:05:15 Set channel filter=0.000000e+000 result=40 02:05:15 Config A/D Result=40 02:05:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:05:15 Get A/D filter: -9.255963e+061 result=40 02:05:15 Get A/D value=-858993460 result=40 02:05:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:05:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:05:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:05:15 Aux= 02:05:15 Message to Camera, serial 49608 queued 02:05:52 Received message from Master: op=PointingHead serial=49621 02:05:52 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:05:52 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:05:52 Point started: ret=0 02:05:52 point_skyscan result=0 02:05:53 Check angles 02:05:53 SkyScan query 02:05:53 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.36<-13424 Statuses=0009 0009 02:05:53 Msec=0 True Az=152.715 Ze=-21.36 Az status=0009 Ze status=0009 02:05:54 Check angles 02:05:54 SkyScan query 02:05:54 SkyScan query done: ret=0 az=135.255<-9017 ze=-0.36<-12024 Statuses=0009 0009 02:05:54 Msec=750 True Az=135.255 Ze=-0.36 Az status=0009 Ze status=0009 02:05:54 Check angles 02:05:54 SkyScan query [UTC 2018-12-11 02:05:55] 02:05:55 SkyScan query done: ret=0 az=117.555<-7837 ze=20.565<-10629 Statuses=0009 0009 02:05:55 Msec=1500 True Az=117.555 Ze=20.565 Az status=0009 Ze status=0009 02:05:55 Check angles 02:05:55 SkyScan query 02:05:56 SkyScan query done: ret=0 az=100.17<-6678 ze=41.55<-9230 Statuses=0009 0009 02:05:56 Msec=2250 True Az=100.17 Ze=41.55 Az status=0009 Ze status=0009 02:05:56 Check angles 02:05:56 SkyScan query 02:05:56 SkyScan query done: ret=0 az=86.055<-5737 ze=51.54<-8564 Statuses=0009 0008 02:05:56 Msec=3000 True Az=86.055 Ze=51.54 Az status=0009 Ze status=0008 02:05:57 Check angles 02:05:57 SkyScan query 02:05:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:05:57 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:05:57 Message to Master queued w/err=0: serial=49621 error=0 02:06:02 Received message from Master: op=Filter serial=49622 02:06:02 Color wheel filter change from 0 to 0 02:06:02 FLIGetFilterPos err=0 currentPosition=0 02:06:02 FLIGetStepsRemaining err=0 RemainingSteps=0 02:06:02 Filter is already there-color wheel unchanged 02:06:02 Received message from Master: op=Shutter serial=49623 02:06:02 Shutter LASER close 02:06:02 Received message from Camera: op=State serial=49625 02:06:02 GetSingleValue result=40 Value=cccccccc 02:06:02 SkyScan query 02:06:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:06:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:06:03 Parameters OK 02:06:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:06:03 Set A/D data flow result=40 02:06:03 Set A/D channel type result=40 02:06:03 Set A/D encoding result=40 02:06:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:06:03 Set channel filter=0.000000e+000 result=40 02:06:03 Config A/D Result=40 02:06:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:06:03 Get A/D filter: -9.255963e+061 result=40 02:06:03 Get A/D value=-858993460 result=40 02:06:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:06:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:06:03 Parameters OK 02:06:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:06:03 Set A/D data flow result=40 02:06:03 Set A/D channel type result=40 02:06:03 Set A/D encoding result=40 02:06:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:06:03 Set channel filter=0.000000e+000 result=40 02:06:03 Config A/D Result=40 02:06:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:06:03 Get A/D filter: -9.255963e+061 result=40 02:06:03 Get A/D value=-858993460 result=40 02:06:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:06:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:06:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:06:03 Aux= 02:06:03 Message to Camera, serial 49625 queued 02:06:40 Received message from Master: op=PointingHead serial=49638 02:06:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:06:40 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:06:40 Point started: ret=0 02:06:40 point_skyscan result=0 02:06:41 Check angles 02:06:41 SkyScan query 02:06:41 SkyScan query done: ret=0 az=109.41<-7294 ze=38.49<-9434 Statuses=0009 0008 02:06:41 Msec=0 True Az=109.41 Ze=38.49 Az status=0009 Ze status=0008 02:06:42 Check angles 02:06:42 SkyScan query 02:06:42 SkyScan query done: ret=0 az=126.84<-8456 ze=38.505<-9433 Statuses=0009 0008 02:06:42 Msec=750 True Az=126.84 Ze=38.505 Az status=0009 Ze status=0008 02:06:42 Check angles 02:06:42 SkyScan query 02:06:43 SkyScan query done: ret=0 az=144.27<-9618 ze=38.505<-9433 Statuses=0009 0008 02:06:43 Msec=1500 True Az=144.27 Ze=38.505 Az status=0009 Ze status=0008 02:06:43 Check angles 02:06:43 SkyScan query 02:06:44 SkyScan query done: ret=0 az=161.655<-10777 ze=38.505<-9433 Statuses=0009 0008 02:06:44 Msec=2250 True Az=161.655 Ze=38.505 Az status=0009 Ze status=0008 02:06:44 Check angles 02:06:44 SkyScan query 02:06:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 02:06:44 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 02:06:45 Check angles 02:06:45 SkyScan query 02:06:45 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 02:06:45 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 02:06:45 Message to Master queued w/err=0: serial=49638 error=0 02:06:50 Received message from Master: op=Filter serial=49639 02:06:50 Color wheel filter change from 0 to 0 02:06:50 FLIGetFilterPos err=0 currentPosition=0 02:06:50 FLIGetStepsRemaining err=0 RemainingSteps=0 02:06:50 Filter is already there-color wheel unchanged 02:06:50 Received message from Master: op=Shutter serial=49640 02:06:50 Shutter LASER close 02:06:50 Received message from Camera: op=State serial=49642 02:06:50 GetSingleValue result=40 Value=cccccccc 02:06:50 SkyScan query 02:06:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:06:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:06:51 Parameters OK 02:06:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:06:51 Set A/D data flow result=40 02:06:51 Set A/D channel type result=40 02:06:51 Set A/D encoding result=40 02:06:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:06:51 Set channel filter=0.000000e+000 result=40 02:06:51 Config A/D Result=40 02:06:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:06:51 Get A/D filter: -9.255963e+061 result=40 02:06:51 Get A/D value=-858993460 result=40 02:06:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:06:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:06:51 Parameters OK 02:06:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:06:51 Set A/D data flow result=40 02:06:51 Set A/D channel type result=40 02:06:51 Set A/D encoding result=40 02:06:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:06:51 Set channel filter=0.000000e+000 result=40 02:06:51 Config A/D Result=40 02:06:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:06:51 Get A/D filter: -9.255963e+061 result=40 02:06:51 Get A/D value=-858993460 result=40 02:06:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:06:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:06:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:06:51 Aux= 02:06:51 Message to Camera, serial 49642 queued 02:07:28 Received message from Master: op=PointingHead serial=49655 02:07:28 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:07:28 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:07:28 Point started: ret=0 02:07:28 point_skyscan result=0 02:07:29 Check angles 02:07:29 SkyScan query 02:07:30 SkyScan query done: ret=0 az=152.985<-10199 ze=8.595<-11427 Statuses=0009 0009 02:07:30 Msec=0 True Az=152.985 Ze=8.595 Az status=0009 Ze status=0009 02:07:30 Check angles 02:07:30 SkyScan query 02:07:30 SkyScan query done: ret=0 az=135.495<-9033 ze=-12.345<-12823 Statuses=0009 0009 02:07:30 Msec=750 True Az=135.495 Ze=-12.345 Az status=0009 Ze status=0009 02:07:30 Check angles 02:07:30 SkyScan query 02:07:31 SkyScan query done: ret=0 az=117.945<-7863 ze=-33.285<-14219 Statuses=0009 0009 02:07:31 Msec=1500 True Az=117.945 Ze=-33.285 Az status=0009 Ze status=0009 02:07:31 Check angles 02:07:31 SkyScan query 02:07:32 SkyScan query done: ret=0 az=100.17<-6678 ze=-51.555<-15437 Statuses=0009 0009 02:07:32 Msec=2250 True Az=100.17 Ze=-51.555 Az status=0009 Ze status=0009 02:07:32 Check angles 02:07:32 SkyScan query 02:07:33 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 02:07:33 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 02:07:33 Check angles 02:07:33 SkyScan query 02:07:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:07:33 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:07:33 Message to Master queued w/err=0: serial=49655 error=0 02:07:38 Received message from Master: op=Filter serial=49656 02:07:38 Color wheel filter change from 0 to 0 02:07:38 FLIGetFilterPos err=0 currentPosition=0 02:07:38 FLIGetStepsRemaining err=0 RemainingSteps=0 02:07:38 Filter is already there-color wheel unchanged 02:07:38 Received message from Master: op=Shutter serial=49657 02:07:38 Shutter LASER close 02:07:38 Received message from Camera: op=State serial=49659 02:07:38 GetSingleValue result=40 Value=cccccccc 02:07:38 SkyScan query 02:07:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:07:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:07:39 Parameters OK 02:07:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:07:39 Set A/D data flow result=40 02:07:39 Set A/D channel type result=40 02:07:39 Set A/D encoding result=40 02:07:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:07:39 Set channel filter=0.000000e+000 result=40 02:07:39 Config A/D Result=40 02:07:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:07:39 Get A/D filter: -9.255963e+061 result=40 02:07:39 Get A/D value=-858993460 result=40 02:07:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:07:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:07:39 Parameters OK 02:07:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:07:39 Set A/D data flow result=40 02:07:39 Set A/D channel type result=40 02:07:39 Set A/D encoding result=40 02:07:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:07:39 Set channel filter=0.000000e+000 result=40 02:07:39 Config A/D Result=40 02:07:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:07:39 Get A/D filter: -9.255963e+061 result=40 02:07:39 Get A/D value=-858993460 result=40 02:07:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:07:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:07:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:07:39 Aux= 02:07:39 Message to Camera, serial 49659 queued 02:08:16 Received message from Master: op=PointingHead serial=49672 02:08:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:08:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:08:16 Point started: ret=0 02:08:16 point_skyscan result=0 02:08:17 Check angles 02:08:17 SkyScan query 02:08:18 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.54<-17436 Statuses=0009 0009 02:08:18 Msec=0 True Az=109.2 Ze=-81.54 Az status=0009 Ze status=0009 02:08:18 Check angles 02:08:18 SkyScan query 02:08:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.93<-18862 Statuses=0008 0009 02:08:18 Msec=750 True Az=112.995 Ze=-102.93 Az status=0008 Ze status=0009 02:08:19 Check angles 02:08:19 SkyScan query 02:08:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.885<-20259 Statuses=0008 0009 02:08:19 Msec=1500 True Az=112.995 Ze=-123.885 Az status=0008 Ze status=0009 02:08:19 Check angles 02:08:19 SkyScan query 02:08:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.84<-21656 Statuses=0008 0009 02:08:20 Msec=2250 True Az=112.995 Ze=-144.84 Az status=0008 Ze status=0009 02:08:20 Check angles 02:08:20 SkyScan query 02:08:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.2<-23080 Statuses=0008 0009 02:08:21 Msec=3000 True Az=112.995 Ze=-166.2 Az status=0008 Ze status=0009 02:08:21 Check angles 02:08:21 SkyScan query 02:08:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:08:21 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:08:21 Message to Master queued w/err=0: serial=49672 error=0 02:08:26 Received message from Master: op=Filter serial=49673 02:08:26 Color wheel filter change from 0 to 0 02:08:26 FLIGetFilterPos err=0 currentPosition=0 02:08:26 FLIGetStepsRemaining err=0 RemainingSteps=0 02:08:26 Filter is already there-color wheel unchanged 02:08:27 Received message from Master: op=Shutter serial=49674 02:08:27 Shutter LASER open 02:08:27 Received message from Camera: op=State serial=49676 02:08:27 GetSingleValue result=40 Value=cccccccc 02:08:27 SkyScan query 02:08:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:08:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:08:27 Parameters OK 02:08:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:08:27 Set A/D data flow result=40 02:08:27 Set A/D channel type result=40 02:08:27 Set A/D encoding result=40 02:08:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:08:27 Set channel filter=0.000000e+000 result=40 02:08:27 Config A/D Result=40 02:08:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:08:27 Get A/D filter: -9.255963e+061 result=40 02:08:27 Get A/D value=-858993460 result=40 02:08:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:08:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:08:27 Parameters OK 02:08:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:08:27 Set A/D data flow result=40 02:08:27 Set A/D channel type result=40 02:08:27 Set A/D encoding result=40 02:08:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:08:27 Set channel filter=0.000000e+000 result=40 02:08:27 Config A/D Result=40 02:08:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:08:27 Get A/D filter: -9.255963e+061 result=40 02:08:27 Get A/D value=-858993460 result=40 02:08:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:08:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:08:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:08:27 Aux= 02:08:27 Message to Camera, serial 49676 queued 02:08:36 Received message from Master: op=Shutter serial=49686 02:08:36 Shutter LASER close 02:08:36 Received message from Master: op=PointingHead serial=49690 02:08:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:08:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:08:36 Point started: ret=0 02:08:36 point_skyscan result=0 02:08:37 Check angles 02:08:37 SkyScan query 02:08:38 SkyScan query done: ret=0 az=89.64<-5976 ze=156.855<-1543 Statuses=0009 0009 02:08:38 Msec=0 True Az=89.64 Ze=156.855 Az status=0009 Ze status=0009 02:08:38 Check angles 02:08:38 SkyScan query 02:08:39 SkyScan query done: ret=0 az=72.03<-4802 ze=135.915<-2939 Statuses=0009 0009 02:08:39 Msec=750 True Az=72.03 Ze=135.915 Az status=0009 Ze status=0009 02:08:39 Check angles 02:08:39 SkyScan query 02:08:39 SkyScan query done: ret=0 az=54.825<-3655 ze=114.945<-4337 Statuses=0009 0009 02:08:39 Msec=1500 True Az=54.825 Ze=114.945 Az status=0009 Ze status=0009 02:08:40 Check angles 02:08:40 SkyScan query 02:08:40 SkyScan query done: ret=0 az=40.89<-2726 ze=93.99<-5734 Statuses=0009 0009 02:08:40 Msec=2250 True Az=40.89 Ze=93.99 Az status=0009 Ze status=0009 02:08:40 Check angles 02:08:40 SkyScan query 02:08:41 SkyScan query done: ret=0 az=40.995<-2733 ze=73.005<-7133 Statuses=0008 0009 02:08:41 Msec=3000 True Az=40.995 Ze=73.005 Az status=0008 Ze status=0009 02:08:41 Check angles 02:08:41 SkyScan query 02:08:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 02:08:42 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 02:08:42 Check angles 02:08:42 SkyScan query 02:08:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:08:42 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:08:42 Message to Master queued w/err=0: serial=49690 error=0 02:08:47 Received message from Master: op=Filter serial=49691 02:08:47 Color wheel filter change from 0 to 0 02:08:47 FLIGetFilterPos err=0 currentPosition=0 02:08:47 FLIGetStepsRemaining err=0 RemainingSteps=0 02:08:47 Filter is already there-color wheel unchanged 02:08:48 Received message from Master: op=Shutter serial=49692 02:08:48 Shutter LASER close 02:08:48 Received message from Camera: op=State serial=49694 02:08:48 GetSingleValue result=40 Value=cccccccc 02:08:48 SkyScan query 02:08:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:08:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:08:48 Parameters OK 02:08:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:08:48 Set A/D data flow result=40 02:08:48 Set A/D channel type result=40 02:08:48 Set A/D encoding result=40 02:08:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:08:48 Set channel filter=0.000000e+000 result=40 02:08:48 Config A/D Result=40 02:08:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:08:48 Get A/D filter: -9.255963e+061 result=40 02:08:48 Get A/D value=-858993460 result=40 02:08:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:08:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:08:48 Parameters OK 02:08:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:08:48 Set A/D data flow result=40 02:08:48 Set A/D channel type result=40 02:08:48 Set A/D encoding result=40 02:08:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:08:48 Set channel filter=0.000000e+000 result=40 02:08:48 Config A/D Result=40 02:08:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:08:48 Get A/D filter: -9.255963e+061 result=40 02:08:48 Get A/D value=-858993460 result=40 02:08:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:08:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:08:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:08:48 Aux= 02:08:48 Message to Camera, serial 49694 queued 02:09:24 Received message from Master: op=PointingHead serial=49706 02:09:24 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 02:09:24 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 02:09:25 Point started: ret=0 02:09:25 point_skyscan result=0 02:09:25 Check angles 02:09:25 SkyScan query 02:09:26 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 02:09:26 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 02:09:26 Check angles 02:09:26 SkyScan query 02:09:27 SkyScan query done: ret=0 az=81.99<-5466 ze=66.495<-7567 Statuses=0009 0008 02:09:27 Msec=750 True Az=81.99 Ze=66.495 Az status=0009 Ze status=0008 02:09:27 Check angles 02:09:27 SkyScan query 02:09:27 SkyScan query done: ret=0 az=100.14<-6676 ze=66.495<-7567 Statuses=0009 0008 02:09:27 Msec=1500 True Az=100.14 Ze=66.495 Az status=0009 Ze status=0008 02:09:28 Check angles 02:09:28 SkyScan query 02:09:28 SkyScan query done: ret=0 az=117.42<-7828 ze=66.495<-7567 Statuses=0009 0008 02:09:28 Msec=2250 True Az=117.42 Ze=66.495 Az status=0009 Ze status=0008 02:09:28 Check angles 02:09:28 SkyScan query 02:09:29 SkyScan query done: ret=0 az=134.76<-8984 ze=66.495<-7567 Statuses=0009 0008 02:09:29 Msec=3000 True Az=134.76 Ze=66.495 Az status=0009 Ze status=0008 02:09:29 Check angles 02:09:29 SkyScan query 02:09:30 SkyScan query done: ret=0 az=152.385<-10159 ze=66.495<-7567 Statuses=0009 0008 02:09:30 Msec=3750 True Az=152.385 Ze=66.495 Az status=0009 Ze status=0008 02:09:30 Check angles 02:09:30 SkyScan query 02:09:30 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:09:30 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 02:09:30 Message to Master queued w/err=0: serial=49706 error=0 02:09:35 Received message from Master: op=Filter serial=49707 02:09:35 Color wheel filter change from 0 to 0 02:09:35 FLIGetFilterPos err=0 currentPosition=0 02:09:35 FLIGetStepsRemaining err=0 RemainingSteps=0 02:09:35 Filter is already there-color wheel unchanged 02:09:36 Received message from Master: op=Shutter serial=49708 02:09:36 Shutter LASER close 02:09:36 Received message from Camera: op=State serial=49710 02:09:36 GetSingleValue result=40 Value=cccccccc 02:09:36 SkyScan query 02:09:36 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:09:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:09:36 Parameters OK 02:09:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:09:36 Set A/D data flow result=40 02:09:36 Set A/D channel type result=40 02:09:36 Set A/D encoding result=40 02:09:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:09:36 Set channel filter=0.000000e+000 result=40 02:09:36 Config A/D Result=40 02:09:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:09:36 Get A/D filter: -9.255963e+061 result=40 02:09:36 Get A/D value=-858993460 result=40 02:09:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:09:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:09:36 Parameters OK 02:09:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:09:36 Set A/D data flow result=40 02:09:36 Set A/D channel type result=40 02:09:36 Set A/D encoding result=40 02:09:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:09:36 Set channel filter=0.000000e+000 result=40 02:09:36 Config A/D Result=40 02:09:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:09:36 Get A/D filter: -9.255963e+061 result=40 02:09:36 Get A/D value=-858993460 result=40 02:09:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:09:36 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:09:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:09:36 Aux= 02:09:36 Message to Camera, serial 49710 queued 02:10:13 Received message from Master: op=PointingHead serial=49723 02:10:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:10:13 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:10:13 Point started: ret=0 02:10:13 point_skyscan result=0 02:10:14 Check angles 02:10:14 SkyScan query 02:10:15 SkyScan query done: ret=0 az=134.79<-8986 ze=36.615<-9559 Statuses=0009 0009 02:10:15 Msec=0 True Az=134.79 Ze=36.615 Az status=0009 Ze status=0009 02:10:15 Check angles 02:10:15 SkyScan query 02:10:15 SkyScan query done: ret=0 az=117.045<-7803 ze=15.255<-10983 Statuses=0009 0009 02:10:15 Msec=750 True Az=117.045 Ze=15.255 Az status=0009 Ze status=0009 02:10:16 Check angles 02:10:16 SkyScan query 02:10:16 SkyScan query done: ret=0 az=99.27<-6618 ze=-6.165<-12411 Statuses=0009 0009 02:10:16 Msec=1500 True Az=99.27 Ze=-6.165 Az status=0009 Ze status=0009 02:10:16 Check angles 02:10:16 SkyScan query 02:10:17 SkyScan query done: ret=0 az=81.81<-5454 ze=-27.12<-13808 Statuses=0009 0009 02:10:17 Msec=2250 True Az=81.81 Ze=-27.12 Az status=0009 Ze status=0009 02:10:17 Check angles 02:10:17 SkyScan query 02:10:18 SkyScan query done: ret=0 az=64.335<-4289 ze=-38.58<-14572 Statuses=0009 0008 02:10:18 Msec=3000 True Az=64.335 Ze=-38.58 Az status=0009 Ze status=0008 02:10:18 Check angles 02:10:18 SkyScan query 02:10:18 SkyScan query done: ret=0 az=46.935<-3129 ze=-38.52<-14568 Statuses=0009 0008 02:10:18 Msec=3750 True Az=46.935 Ze=-38.52 Az status=0009 Ze status=0008 02:10:19 Check angles 02:10:19 SkyScan query 02:10:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:10:19 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 02:10:19 Message to Master queued w/err=0: serial=49723 error=0 02:10:24 Received message from Master: op=Filter serial=49724 02:10:24 Color wheel filter change from 0 to 0 02:10:24 FLIGetFilterPos err=0 currentPosition=0 02:10:24 FLIGetStepsRemaining err=0 RemainingSteps=0 02:10:24 Filter is already there-color wheel unchanged 02:10:24 Received message from Master: op=Shutter serial=49725 02:10:24 Shutter LASER close 02:10:24 Received message from Camera: op=State serial=49727 02:10:24 GetSingleValue result=40 Value=cccccccc 02:10:24 SkyScan query 02:10:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:10:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:10:25 Parameters OK 02:10:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:10:25 Set A/D data flow result=40 02:10:25 Set A/D channel type result=40 02:10:25 Set A/D encoding result=40 02:10:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:10:25 Set channel filter=0.000000e+000 result=40 02:10:25 Config A/D Result=40 02:10:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:10:25 Get A/D filter: -9.255963e+061 result=40 02:10:25 Get A/D value=-858993460 result=40 02:10:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:10:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:10:25 Parameters OK 02:10:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:10:25 Set A/D data flow result=40 02:10:25 Set A/D channel type result=40 02:10:25 Set A/D encoding result=40 02:10:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:10:25 Set channel filter=0.000000e+000 result=40 02:10:25 Config A/D Result=40 02:10:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:10:25 Get A/D filter: -9.255963e+061 result=40 02:10:25 Get A/D value=-858993460 result=40 02:10:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:10:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:10:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:10:25 Aux= 02:10:25 Message to Camera, serial 49727 queued 02:11:02 Received message from Master: op=PointingHead serial=49740 02:11:02 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:11:02 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:11:02 Point started: ret=0 02:11:02 point_skyscan result=0 02:11:03 Check angles 02:11:03 SkyScan query 02:11:04 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.295<-16553 Statuses=0009 0009 02:11:04 Msec=0 True Az=64.005 Ze=-68.295 Az status=0009 Ze status=0009 02:11:04 Check angles 02:11:04 SkyScan query 02:11:04 SkyScan query done: ret=0 az=81.42<-5428 ze=-89.295<-17953 Statuses=0009 0009 02:11:04 Msec=750 True Az=81.42 Ze=-89.295 Az status=0009 Ze status=0009 02:11:04 Check angles 02:11:04 SkyScan query 02:11:05 SkyScan query done: ret=0 az=98.955<-6597 ze=-110.22<-19348 Statuses=0009 0009 02:11:05 Msec=1500 True Az=98.955 Ze=-110.22 Az status=0009 Ze status=0009 02:11:05 Check angles 02:11:05 SkyScan query 02:11:06 SkyScan query done: ret=0 az=116.535<-7769 ze=-131.19<-20746 Statuses=0009 0009 02:11:06 Msec=2250 True Az=116.535 Ze=-131.19 Az status=0009 Ze status=0009 02:11:06 Check angles 02:11:06 SkyScan query 02:11:07 SkyScan query done: ret=0 az=131.19<-8746 ze=-141.54<-21436 Statuses=0009 0008 02:11:07 Msec=3000 True Az=131.19 Ze=-141.54 Az status=0009 Ze status=0008 02:11:07 Check angles 02:11:07 SkyScan query 02:11:07 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:11:07 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:11:07 Message to Master queued w/err=0: serial=49740 error=0 02:11:12 Received message from Master: op=Filter serial=49741 02:11:12 Color wheel filter change from 0 to 0 02:11:12 FLIGetFilterPos err=0 currentPosition=0 02:11:12 FLIGetStepsRemaining err=0 RemainingSteps=0 02:11:12 Filter is already there-color wheel unchanged 02:11:12 Received message from Master: op=Shutter serial=49742 02:11:12 Shutter LASER close 02:11:13 Received message from Camera: op=State serial=49744 02:11:13 GetSingleValue result=40 Value=cccccccc 02:11:13 SkyScan query 02:11:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:11:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:11:13 Parameters OK 02:11:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:11:13 Set A/D data flow result=40 02:11:13 Set A/D channel type result=40 02:11:13 Set A/D encoding result=40 02:11:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:11:13 Set channel filter=0.000000e+000 result=40 02:11:13 Config A/D Result=40 02:11:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:11:13 Get A/D filter: -9.255963e+061 result=40 02:11:13 Get A/D value=-858993460 result=40 02:11:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:11:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:11:13 Parameters OK 02:11:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:11:13 Set A/D data flow result=40 02:11:13 Set A/D channel type result=40 02:11:13 Set A/D encoding result=40 02:11:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:11:13 Set channel filter=0.000000e+000 result=40 02:11:13 Config A/D Result=40 02:11:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:11:13 Get A/D filter: -9.255963e+061 result=40 02:11:13 Get A/D value=-858993460 result=40 02:11:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:11:13 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:11:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:11:13 Aux= 02:11:13 Message to Camera, serial 49744 queued 02:11:50 Received message from Master: op=PointingHead serial=49757 02:11:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:11:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:11:50 Point started: ret=0 02:11:50 point_skyscan result=0 02:11:51 Check angles 02:11:51 SkyScan query 02:11:52 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.075<-23405 Statuses=0009 0009 02:11:52 Msec=0 True Az=113.01 Ze=-171.075 Az status=0009 Ze status=0009 02:11:52 Check angles 02:11:52 SkyScan query 02:11:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:11:52 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:11:52 Message to Master queued w/err=0: serial=49757 error=0 02:11:57 Received message from Master: op=Filter serial=49758 02:11:57 Color wheel filter change from 0 to 0 02:11:57 FLIGetFilterPos err=0 currentPosition=0 02:11:57 FLIGetStepsRemaining err=0 RemainingSteps=0 02:11:57 Filter is already there-color wheel unchanged 02:11:58 Received message from Master: op=Shutter serial=49759 02:11:58 Shutter LASER open 02:11:58 Received message from Camera: op=State serial=49761 02:11:58 GetSingleValue result=40 Value=cccccccc 02:11:58 SkyScan query 02:11:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:11:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:11:58 Parameters OK 02:11:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:11:58 Set A/D data flow result=40 02:11:58 Set A/D channel type result=40 02:11:58 Set A/D encoding result=40 02:11:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:11:58 Set channel filter=0.000000e+000 result=40 02:11:58 Config A/D Result=40 02:11:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:11:58 Get A/D filter: -9.255963e+061 result=40 02:11:58 Get A/D value=-858993460 result=40 02:11:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:11:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:11:58 Parameters OK 02:11:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:11:58 Set A/D data flow result=40 02:11:58 Set A/D channel type result=40 02:11:58 Set A/D encoding result=40 02:11:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:11:58 Set channel filter=0.000000e+000 result=40 02:11:58 Config A/D Result=40 02:11:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:11:58 Get A/D filter: -9.255963e+061 result=40 02:11:58 Get A/D value=-858993460 result=40 02:11:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:11:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:11:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:11:58 Aux= 02:11:58 Message to Camera, serial 49761 queued 02:12:07 Received message from Master: op=Shutter serial=49771 02:12:07 Shutter LASER close 02:12:07 Received message from Master: op=PointingHead serial=49775 02:12:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:12:07 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:12:08 Point started: ret=0 02:12:08 point_skyscan result=0 02:12:08 Check angles 02:12:08 SkyScan query 02:12:09 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.755<-21517 Statuses=0009 0009 02:12:09 Msec=0 True Az=136.35 Ze=-142.755 Az status=0009 Ze status=0009 02:12:09 Check angles 02:12:09 SkyScan query 02:12:10 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.785<-20119 Statuses=0009 0009 02:12:10 Msec=750 True Az=153.75 Ze=-121.785 Az status=0009 Ze status=0009 02:12:10 Check angles 02:12:10 SkyScan query 02:12:10 SkyScan query done: ret=0 az=171.27<-11418 ze=-100.845<-18723 Statuses=0009 0009 02:12:10 Msec=1500 True Az=171.27 Ze=-100.845 Az status=0009 Ze status=0009 02:12:11 Check angles 02:12:11 SkyScan query 02:12:11 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.47<-17298 Statuses=0008 0009 02:12:11 Msec=2250 True Az=176.025 Ze=-79.47 Az status=0008 Ze status=0009 02:12:11 Check angles 02:12:11 SkyScan query 02:12:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.485<-15899 Statuses=0008 0009 02:12:12 Msec=3000 True Az=175.995 Ze=-58.485 Az status=0008 Ze status=0009 02:12:12 Check angles 02:12:12 SkyScan query 02:12:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 02:12:13 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 02:12:13 Message to Master queued w/err=0: serial=49775 error=0 02:12:18 Received message from Master: op=Filter serial=49776 02:12:18 Color wheel filter change from 0 to 0 02:12:18 FLIGetFilterPos err=0 currentPosition=0 02:12:18 FLIGetStepsRemaining err=0 RemainingSteps=0 02:12:18 Filter is already there-color wheel unchanged 02:12:18 Received message from Master: op=Shutter serial=49777 02:12:18 Shutter LASER close 02:12:18 Received message from Camera: op=State serial=49779 02:12:18 GetSingleValue result=40 Value=cccccccc 02:12:18 SkyScan query 02:12:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:12:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:12:19 Parameters OK 02:12:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:12:19 Set A/D data flow result=40 02:12:19 Set A/D channel type result=40 02:12:19 Set A/D encoding result=40 02:12:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:12:19 Set channel filter=0.000000e+000 result=40 02:12:19 Config A/D Result=40 02:12:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:12:19 Get A/D filter: -9.255963e+061 result=40 02:12:19 Get A/D value=-858993460 result=40 02:12:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:12:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:12:19 Parameters OK 02:12:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:12:19 Set A/D data flow result=40 02:12:19 Set A/D channel type result=40 02:12:19 Set A/D encoding result=40 02:12:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:12:19 Set channel filter=0.000000e+000 result=40 02:12:19 Config A/D Result=40 02:12:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:12:19 Get A/D filter: -9.255963e+061 result=40 02:12:19 Get A/D value=-858993460 result=40 02:12:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:12:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:12:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:12:19 Aux= 02:12:19 Message to Camera, serial 49779 queued 02:12:55 Received message from Master: op=PointingHead serial=49792 02:12:55 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:12:55 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:12:56 Point started: ret=0 02:12:56 point_skyscan result=0 02:12:57 Check angles 02:12:57 SkyScan query 02:12:57 SkyScan query done: ret=0 az=153.135<-10209 ze=-21.99<-13466 Statuses=0009 0009 02:12:57 Msec=0 True Az=153.135 Ze=-21.99 Az status=0009 Ze status=0009 02:12:57 Check angles 02:12:57 SkyScan query 02:12:58 SkyScan query done: ret=0 az=135.765<-9051 ze=-0.99<-12066 Statuses=0009 0009 02:12:58 Msec=750 True Az=135.765 Ze=-0.99 Az status=0009 Ze status=0009 02:12:58 Check angles 02:12:58 SkyScan query 02:12:59 SkyScan query done: ret=0 az=118.125<-7875 ze=19.95<-10670 Statuses=0009 0009 02:12:59 Msec=1500 True Az=118.125 Ze=19.95 Az status=0009 Ze status=0009 02:12:59 Check angles 02:12:59 SkyScan query 02:12:59 SkyScan query done: ret=0 az=100.65<-6710 ze=40.89<-9274 Statuses=0009 0009 02:12:59 Msec=2250 True Az=100.65 Ze=40.89 Az status=0009 Ze status=0009 02:13:00 Check angles 02:13:00 SkyScan query 02:13:00 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 02:13:00 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 02:13:00 Check angles 02:13:00 SkyScan query 02:13:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:13:01 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:13:01 Message to Master queued w/err=0: serial=49792 error=0 02:13:06 Received message from Master: op=Filter serial=49793 02:13:06 Color wheel filter change from 0 to 0 02:13:06 FLIGetFilterPos err=0 currentPosition=0 02:13:06 FLIGetStepsRemaining err=0 RemainingSteps=0 02:13:06 Filter is already there-color wheel unchanged 02:13:06 Received message from Master: op=Shutter serial=49794 02:13:06 Shutter LASER close 02:13:06 Received message from Camera: op=State serial=49796 02:13:06 GetSingleValue result=40 Value=cccccccc 02:13:06 SkyScan query 02:13:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:13:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:13:07 Parameters OK 02:13:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:13:07 Set A/D data flow result=40 02:13:07 Set A/D channel type result=40 02:13:07 Set A/D encoding result=40 02:13:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:13:07 Set channel filter=0.000000e+000 result=40 02:13:07 Config A/D Result=40 02:13:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:13:07 Get A/D filter: -9.255963e+061 result=40 02:13:07 Get A/D value=-858993460 result=40 02:13:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:13:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:13:07 Parameters OK 02:13:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:13:07 Set A/D data flow result=40 02:13:07 Set A/D channel type result=40 02:13:07 Set A/D encoding result=40 02:13:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:13:07 Set channel filter=0.000000e+000 result=40 02:13:07 Config A/D Result=40 02:13:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:13:07 Get A/D filter: -9.255963e+061 result=40 02:13:07 Get A/D value=-858993460 result=40 02:13:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:13:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:13:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:13:07 Aux= 02:13:07 Message to Camera, serial 49796 queued 02:13:44 Received message from Master: op=PointingHead serial=49809 02:13:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:13:44 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:13:44 Point started: ret=0 02:13:44 point_skyscan result=0 02:13:45 Check angles 02:13:45 SkyScan query 02:13:45 SkyScan query done: ret=0 az=109.08<-7272 ze=38.49<-9434 Statuses=0009 0008 02:13:45 Msec=0 True Az=109.08 Ze=38.49 Az status=0009 Ze status=0008 02:13:45 Check angles 02:13:45 SkyScan query 02:13:46 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 02:13:46 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 02:13:46 Check angles 02:13:46 SkyScan query 02:13:47 SkyScan query done: ret=0 az=144.06<-9604 ze=38.505<-9433 Statuses=0009 0008 02:13:47 Msec=1500 True Az=144.06 Ze=38.505 Az status=0009 Ze status=0008 02:13:47 Check angles 02:13:47 SkyScan query 02:13:47 SkyScan query done: ret=0 az=161.835<-10789 ze=38.505<-9433 Statuses=0009 0008 02:13:47 Msec=2250 True Az=161.835 Ze=38.505 Az status=0009 Ze status=0008 02:13:48 Check angles 02:13:48 SkyScan query 02:13:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 02:13:48 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 02:13:48 Check angles 02:13:48 SkyScan query 02:13:49 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 02:13:49 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 02:13:49 Message to Master queued w/err=0: serial=49809 error=0 02:13:54 Received message from Master: op=Filter serial=49810 02:13:54 Color wheel filter change from 0 to 0 02:13:54 FLIGetFilterPos err=0 currentPosition=0 02:13:54 FLIGetStepsRemaining err=0 RemainingSteps=0 02:13:54 Filter is already there-color wheel unchanged 02:13:54 Received message from Master: op=Shutter serial=49811 02:13:54 Shutter LASER close 02:13:54 Received message from Camera: op=State serial=49813 02:13:54 GetSingleValue result=40 Value=cccccccc 02:13:54 SkyScan query 02:13:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:13:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:13:55 Parameters OK 02:13:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:13:55 Set A/D data flow result=40 02:13:55 Set A/D channel type result=40 02:13:55 Set A/D encoding result=40 02:13:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:13:55 Set channel filter=0.000000e+000 result=40 02:13:55 Config A/D Result=40 02:13:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:13:55 Get A/D filter: -9.255963e+061 result=40 02:13:55 Get A/D value=-858993460 result=40 02:13:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:13:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:13:55 Parameters OK 02:13:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:13:55 Set A/D data flow result=40 02:13:55 Set A/D channel type result=40 02:13:55 Set A/D encoding result=40 02:13:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:13:55 Set channel filter=0.000000e+000 result=40 02:13:55 Config A/D Result=40 02:13:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:13:55 Get A/D filter: -9.255963e+061 result=40 02:13:55 Get A/D value=-858993460 result=40 02:13:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:13:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:13:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:13:55 Aux= 02:13:55 Message to Camera, serial 49813 queued 02:14:32 Received message from Master: op=PointingHead serial=49826 02:14:32 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:14:32 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:14:32 Point started: ret=0 02:14:32 point_skyscan result=0 02:14:33 Check angles 02:14:33 SkyScan query 02:14:33 SkyScan query done: ret=0 az=153.135<-10209 ze=8.85<-11410 Statuses=0009 0009 02:14:33 Msec=0 True Az=153.135 Ze=8.85 Az status=0009 Ze status=0009 02:14:34 Check angles 02:14:34 SkyScan query 02:14:34 SkyScan query done: ret=0 az=135.795<-9053 ze=-12.09<-12806 Statuses=0009 0009 02:14:34 Msec=750 True Az=135.795 Ze=-12.09 Az status=0009 Ze status=0009 02:14:34 Check angles 02:14:34 SkyScan query 02:14:35 SkyScan query done: ret=0 az=118.185<-7879 ze=-33.03<-14202 Statuses=0009 0009 02:14:35 Msec=1500 True Az=118.185 Ze=-33.03 Az status=0009 Ze status=0009 02:14:35 Check angles 02:14:35 SkyScan query 02:14:36 SkyScan query done: ret=0 az=100.455<-6697 ze=-51.555<-15437 Statuses=0009 0009 02:14:36 Msec=2250 True Az=100.455 Ze=-51.555 Az status=0009 Ze status=0009 02:14:36 Check angles 02:14:36 SkyScan query 02:14:36 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 02:14:36 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 02:14:37 Check angles 02:14:37 SkyScan query 02:14:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:14:37 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:14:37 Message to Master queued w/err=0: serial=49826 error=0 02:14:42 Received message from Master: op=Filter serial=49827 02:14:42 Color wheel filter change from 0 to 0 02:14:42 FLIGetFilterPos err=0 currentPosition=0 02:14:42 FLIGetStepsRemaining err=0 RemainingSteps=0 02:14:42 Filter is already there-color wheel unchanged 02:14:42 Received message from Master: op=Shutter serial=49828 02:14:42 Shutter LASER close 02:14:42 Received message from Camera: op=State serial=49830 02:14:42 GetSingleValue result=40 Value=cccccccc 02:14:42 SkyScan query 02:14:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:14:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:14:43 Parameters OK 02:14:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:14:43 Set A/D data flow result=40 02:14:43 Set A/D channel type result=40 02:14:43 Set A/D encoding result=40 02:14:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:14:43 Set channel filter=0.000000e+000 result=40 02:14:43 Config A/D Result=40 02:14:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:14:43 Get A/D filter: -9.255963e+061 result=40 02:14:43 Get A/D value=-858993460 result=40 02:14:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:14:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:14:43 Parameters OK 02:14:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:14:43 Set A/D data flow result=40 02:14:43 Set A/D channel type result=40 02:14:43 Set A/D encoding result=40 02:14:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:14:43 Set channel filter=0.000000e+000 result=40 02:14:43 Config A/D Result=40 02:14:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:14:43 Get A/D filter: -9.255963e+061 result=40 02:14:43 Get A/D value=-858993460 result=40 02:14:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:14:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:14:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:14:43 Aux= 02:14:43 Message to Camera, serial 49830 queued 02:15:20 Received message from Master: op=PointingHead serial=49843 02:15:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:15:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:15:20 Point started: ret=0 02:15:20 point_skyscan result=0 02:15:21 Check angles 02:15:21 SkyScan query 02:15:21 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.12<-17408 Statuses=0009 0009 02:15:21 Msec=0 True Az=108.795 Ze=-81.12 Az status=0009 Ze status=0009 02:15:22 Check angles 02:15:22 SkyScan query 02:15:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.03<-18802 Statuses=0008 0009 02:15:22 Msec=750 True Az=112.995 Ze=-102.03 Az status=0008 Ze status=0009 02:15:22 Check angles 02:15:22 SkyScan query 02:15:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-123<-20200 Statuses=0008 0009 02:15:23 Msec=1500 True Az=112.995 Ze=-123 Az status=0008 Ze status=0009 02:15:23 Check angles 02:15:23 SkyScan query 02:15:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.42<-21628 Statuses=0008 0009 02:15:24 Msec=2250 True Az=112.995 Ze=-144.42 Az status=0008 Ze status=0009 02:15:24 Check angles 02:15:24 SkyScan query 02:15:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.345<-23023 Statuses=0008 0009 02:15:24 Msec=3000 True Az=112.995 Ze=-165.345 Az status=0008 Ze status=0009 02:15:25 Check angles 02:15:25 SkyScan query 02:15:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:15:25 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:15:25 Message to Master queued w/err=0: serial=49843 error=0 02:15:29 Received message from Master: op=Identify serial=49844 02:15:30 Received message from Master: op=Filter serial=49847 02:15:30 Color wheel filter change from 0 to 0 02:15:30 FLIGetFilterPos err=0 currentPosition=0 02:15:30 FLIGetStepsRemaining err=0 RemainingSteps=0 02:15:30 Filter is already there-color wheel unchanged 02:15:30 Received message from Master: op=Shutter serial=49848 02:15:30 Shutter LASER open 02:15:31 Received message from Camera: op=State serial=49850 02:15:31 GetSingleValue result=40 Value=cccccccc 02:15:31 SkyScan query 02:15:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:15:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:15:31 Parameters OK 02:15:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:15:31 Set A/D data flow result=40 02:15:31 Set A/D channel type result=40 02:15:31 Set A/D encoding result=40 02:15:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:15:31 Set channel filter=0.000000e+000 result=40 02:15:31 Config A/D Result=40 02:15:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:15:31 Get A/D filter: -9.255963e+061 result=40 02:15:31 Get A/D value=-858993460 result=40 02:15:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:15:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:15:31 Parameters OK 02:15:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:15:31 Set A/D data flow result=40 02:15:31 Set A/D channel type result=40 02:15:31 Set A/D encoding result=40 02:15:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:15:31 Set channel filter=0.000000e+000 result=40 02:15:31 Config A/D Result=40 02:15:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:15:31 Get A/D filter: -9.255963e+061 result=40 02:15:31 Get A/D value=-858993460 result=40 02:15:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:15:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:15:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:15:31 Aux= 02:15:31 Message to Camera, serial 49850 queued 02:15:40 Received message from Master: op=Shutter serial=49860 02:15:40 Shutter LASER close 02:15:40 Received message from Master: op=PointingHead serial=49864 02:15:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:15:40 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:15:40 Point started: ret=0 02:15:40 point_skyscan result=0 02:15:41 Check angles 02:15:41 SkyScan query 02:15:42 SkyScan query done: ret=0 az=89.88<-5992 ze=157.32<-1512 Statuses=0009 0009 02:15:42 Msec=0 True Az=89.88 Ze=157.32 Az status=0009 Ze status=0009 02:15:42 Check angles 02:15:42 SkyScan query 02:15:42 SkyScan query done: ret=0 az=72.03<-4802 ze=135.915<-2939 Statuses=0009 0009 02:15:42 Msec=750 True Az=72.03 Ze=135.915 Az status=0009 Ze status=0009 02:15:43 Check angles 02:15:43 SkyScan query 02:15:43 SkyScan query done: ret=0 az=54.84<-3656 ze=114.975<-4335 Statuses=0009 0009 02:15:43 Msec=1500 True Az=54.84 Ze=114.975 Az status=0009 Ze status=0009 [UTC 2018-12-11 02:15:43] 02:15:43 Check angles 02:15:43 SkyScan query 02:15:44 SkyScan query done: ret=0 az=40.995<-2733 ze=91.41<-5906 Statuses=0008 0009 02:15:44 Msec=2250 True Az=40.995 Ze=91.41 Az status=0008 Ze status=0009 02:15:44 Check angles 02:15:44 SkyScan query 02:15:45 SkyScan query done: ret=0 az=40.995<-2733 ze=72.6<-7160 Statuses=0008 0009 02:15:45 Msec=3000 True Az=40.995 Ze=72.6 Az status=0008 Ze status=0009 02:15:45 Check angles 02:15:45 SkyScan query 02:15:45 SkyScan query done: ret=0 az=40.995<-2733 ze=52.335<-8511 Statuses=0008 0009 02:15:45 Msec=3750 True Az=40.995 Ze=52.335 Az status=0008 Ze status=0009 02:15:46 Check angles 02:15:46 SkyScan query 02:15:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:15:46 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:15:46 Message to Master queued w/err=0: serial=49864 error=0 02:15:51 Received message from Master: op=Filter serial=49865 02:15:51 Color wheel filter change from 0 to 0 02:15:51 FLIGetFilterPos err=0 currentPosition=0 02:15:51 FLIGetStepsRemaining err=0 RemainingSteps=0 02:15:51 Filter is already there-color wheel unchanged 02:15:51 Received message from Master: op=Shutter serial=49866 02:15:51 Shutter LASER close 02:15:51 Received message from Camera: op=State serial=49868 02:15:51 GetSingleValue result=40 Value=cccccccc 02:15:51 SkyScan query 02:15:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:15:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:15:52 Parameters OK 02:15:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:15:52 Set A/D data flow result=40 02:15:52 Set A/D channel type result=40 02:15:52 Set A/D encoding result=40 02:15:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:15:52 Set channel filter=0.000000e+000 result=40 02:15:52 Config A/D Result=40 02:15:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:15:52 Get A/D filter: -9.255963e+061 result=40 02:15:52 Get A/D value=-858993460 result=40 02:15:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:15:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:15:52 Parameters OK 02:15:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:15:52 Set A/D data flow result=40 02:15:52 Set A/D channel type result=40 02:15:52 Set A/D encoding result=40 02:15:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:15:52 Set channel filter=0.000000e+000 result=40 02:15:52 Config A/D Result=40 02:15:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:15:52 Get A/D filter: -9.255963e+061 result=40 02:15:52 Get A/D value=-858993460 result=40 02:15:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:15:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:15:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:15:52 Aux= 02:15:52 Message to Camera, serial 49868 queued [UTC 2018-12-11 02:15:54] 02:16:29 Received message from Master: op=PointingHead serial=49881 02:16:29 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 02:16:29 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 02:16:29 Point started: ret=0 02:16:29 point_skyscan result=0 02:16:30 Check angles 02:16:30 SkyScan query 02:16:31 SkyScan query done: ret=0 az=64.08<-4272 ze=66.555<-7563 Statuses=0009 0008 02:16:31 Msec=0 True Az=64.08 Ze=66.555 Az status=0009 Ze status=0008 02:16:31 Check angles 02:16:31 SkyScan query 02:16:31 SkyScan query done: ret=0 az=81.42<-5428 ze=66.51<-7566 Statuses=0009 0008 02:16:31 Msec=750 True Az=81.42 Ze=66.51 Az status=0009 Ze status=0008 02:16:32 Check angles 02:16:32 SkyScan query 02:16:32 SkyScan query done: ret=0 az=99.48<-6632 ze=66.495<-7567 Statuses=0009 0008 02:16:32 Msec=1500 True Az=99.48 Ze=66.495 Az status=0009 Ze status=0008 02:16:32 Check angles 02:16:32 SkyScan query 02:16:33 SkyScan query done: ret=0 az=117.03<-7802 ze=66.495<-7567 Statuses=0009 0008 02:16:33 Msec=2250 True Az=117.03 Ze=66.495 Az status=0009 Ze status=0008 02:16:33 Check angles 02:16:33 SkyScan query 02:16:34 SkyScan query done: ret=0 az=134.445<-8963 ze=66.495<-7567 Statuses=0009 0008 02:16:34 Msec=3000 True Az=134.445 Ze=66.495 Az status=0009 Ze status=0008 02:16:34 Check angles 02:16:34 SkyScan query 02:16:34 SkyScan query done: ret=0 az=151.965<-10131 ze=66.495<-7567 Statuses=0009 0008 02:16:34 Msec=3750 True Az=151.965 Ze=66.495 Az status=0009 Ze status=0008 02:16:35 Check angles 02:16:35 SkyScan query 02:16:35 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 02:16:35 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 02:16:35 Message to Master queued w/err=0: serial=49881 error=0 02:16:40 Received message from Master: op=Filter serial=49882 02:16:40 Color wheel filter change from 0 to 0 02:16:40 FLIGetFilterPos err=0 currentPosition=0 02:16:40 FLIGetStepsRemaining err=0 RemainingSteps=0 02:16:40 Filter is already there-color wheel unchanged 02:16:40 Received message from Master: op=Shutter serial=49883 02:16:40 Shutter LASER close 02:16:40 Received message from Camera: op=State serial=49885 02:16:40 GetSingleValue result=40 Value=cccccccc 02:16:40 SkyScan query 02:16:41 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:16:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:16:41 Parameters OK 02:16:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:16:41 Set A/D data flow result=40 02:16:41 Set A/D channel type result=40 02:16:41 Set A/D encoding result=40 02:16:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:16:41 Set channel filter=0.000000e+000 result=40 02:16:41 Config A/D Result=40 02:16:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:16:41 Get A/D filter: -9.255963e+061 result=40 02:16:41 Get A/D value=-858993460 result=40 02:16:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:16:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:16:41 Parameters OK 02:16:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:16:41 Set A/D data flow result=40 02:16:41 Set A/D channel type result=40 02:16:41 Set A/D encoding result=40 02:16:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:16:41 Set channel filter=0.000000e+000 result=40 02:16:41 Config A/D Result=40 02:16:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:16:41 Get A/D filter: -9.255963e+061 result=40 02:16:41 Get A/D value=-858993460 result=40 02:16:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:16:41 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:16:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:16:41 Aux= 02:16:41 Message to Camera, serial 49885 queued 02:17:18 Received message from Master: op=PointingHead serial=49898 02:17:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:17:18 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:17:18 Point started: ret=0 02:17:18 point_skyscan result=0 02:17:19 Check angles 02:17:19 SkyScan query 02:17:19 SkyScan query done: ret=0 az=135.12<-9008 ze=36.855<-9543 Statuses=0009 0009 02:17:19 Msec=0 True Az=135.12 Ze=36.855 Az status=0009 Ze status=0009 02:17:20 Check angles 02:17:20 SkyScan query 02:17:20 SkyScan query done: ret=0 az=117.27<-7818 ze=15.51<-10966 Statuses=0009 0009 02:17:20 Msec=750 True Az=117.27 Ze=15.51 Az status=0009 Ze status=0009 02:17:20 Check angles 02:17:20 SkyScan query 02:17:21 SkyScan query done: ret=0 az=99.9<-6660 ze=-5.475<-12365 Statuses=0009 0009 02:17:21 Msec=1500 True Az=99.9 Ze=-5.475 Az status=0009 Ze status=0009 02:17:21 Check angles 02:17:21 SkyScan query 02:17:22 SkyScan query done: ret=0 az=82.305<-5487 ze=-26.415<-13761 Statuses=0009 0009 02:17:22 Msec=2250 True Az=82.305 Ze=-26.415 Az status=0009 Ze status=0009 02:17:22 Check angles 02:17:22 SkyScan query 02:17:22 SkyScan query done: ret=0 az=64.5<-4300 ze=-38.565<-14571 Statuses=0009 0008 02:17:22 Msec=3000 True Az=64.5 Ze=-38.565 Az status=0009 Ze status=0008 02:17:23 Check angles 02:17:23 SkyScan query 02:17:23 SkyScan query done: ret=0 az=47.07<-3138 ze=-38.535<-14569 Statuses=0009 0008 02:17:23 Msec=3750 True Az=47.07 Ze=-38.535 Az status=0009 Ze status=0008 02:17:23 Check angles 02:17:23 SkyScan query 02:17:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:17:24 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 02:17:24 Message to Master queued w/err=0: serial=49898 error=0 02:17:29 Received message from Master: op=Filter serial=49899 02:17:29 Color wheel filter change from 0 to 0 02:17:29 FLIGetFilterPos err=0 currentPosition=0 02:17:29 FLIGetStepsRemaining err=0 RemainingSteps=0 02:17:29 Filter is already there-color wheel unchanged 02:17:29 Received message from Master: op=Shutter serial=49900 02:17:29 Shutter LASER close 02:17:29 Received message from Camera: op=State serial=49902 02:17:29 GetSingleValue result=40 Value=cccccccc 02:17:29 SkyScan query 02:17:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:17:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:17:30 Parameters OK 02:17:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:17:30 Set A/D data flow result=40 02:17:30 Set A/D channel type result=40 02:17:30 Set A/D encoding result=40 02:17:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:17:30 Set channel filter=0.000000e+000 result=40 02:17:30 Config A/D Result=40 02:17:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:17:30 Get A/D filter: -9.255963e+061 result=40 02:17:30 Get A/D value=-858993460 result=40 02:17:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:17:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:17:30 Parameters OK 02:17:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:17:30 Set A/D data flow result=40 02:17:30 Set A/D channel type result=40 02:17:30 Set A/D encoding result=40 02:17:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:17:30 Set channel filter=0.000000e+000 result=40 02:17:30 Config A/D Result=40 02:17:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:17:30 Get A/D filter: -9.255963e+061 result=40 02:17:30 Get A/D value=-858993460 result=40 02:17:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:17:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:17:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:17:30 Aux= 02:17:30 Message to Camera, serial 49902 queued 02:18:07 Received message from Master: op=PointingHead serial=49915 02:18:07 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:18:07 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:18:07 Point started: ret=0 02:18:07 point_skyscan result=0 02:18:08 Check angles 02:18:08 SkyScan query 02:18:08 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.445<-16563 Statuses=0009 0009 02:18:08 Msec=0 True Az=64.23 Ze=-68.445 Az status=0009 Ze status=0009 02:18:08 Check angles 02:18:08 SkyScan query 02:18:09 SkyScan query done: ret=0 az=82.005<-5467 ze=-89.895<-17993 Statuses=0009 0009 02:18:09 Msec=750 True Az=82.005 Ze=-89.895 Az status=0009 Ze status=0009 02:18:09 Check angles 02:18:09 SkyScan query 02:18:10 SkyScan query done: ret=0 az=99.675<-6645 ze=-110.82<-19388 Statuses=0009 0009 02:18:10 Msec=1500 True Az=99.675 Ze=-110.82 Az status=0009 Ze status=0009 02:18:10 Check angles 02:18:10 SkyScan query 02:18:10 SkyScan query done: ret=0 az=117.03<-7802 ze=-131.76<-20784 Statuses=0009 0009 02:18:10 Msec=2250 True Az=117.03 Ze=-131.76 Az status=0009 Ze status=0009 02:18:11 Check angles 02:18:11 SkyScan query 02:18:11 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 02:18:11 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 02:18:11 Check angles 02:18:11 SkyScan query 02:18:12 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:18:12 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:18:12 Message to Master queued w/err=0: serial=49915 error=0 02:18:17 Received message from Master: op=Filter serial=49916 02:18:17 Color wheel filter change from 0 to 0 02:18:17 FLIGetFilterPos err=0 currentPosition=0 02:18:17 FLIGetStepsRemaining err=0 RemainingSteps=0 02:18:17 Filter is already there-color wheel unchanged 02:18:17 Received message from Master: op=Shutter serial=49917 02:18:17 Shutter LASER close 02:18:17 Received message from Camera: op=State serial=49919 02:18:17 GetSingleValue result=40 Value=cccccccc 02:18:17 SkyScan query 02:18:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:18:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:18:18 Parameters OK 02:18:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:18:18 Set A/D data flow result=40 02:18:18 Set A/D channel type result=40 02:18:18 Set A/D encoding result=40 02:18:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:18:18 Set channel filter=0.000000e+000 result=40 02:18:18 Config A/D Result=40 02:18:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:18:18 Get A/D filter: -9.255963e+061 result=40 02:18:18 Get A/D value=-858993460 result=40 02:18:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:18:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:18:18 Parameters OK 02:18:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:18:18 Set A/D data flow result=40 02:18:18 Set A/D channel type result=40 02:18:18 Set A/D encoding result=40 02:18:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:18:18 Set channel filter=0.000000e+000 result=40 02:18:18 Config A/D Result=40 02:18:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:18:18 Get A/D filter: -9.255963e+061 result=40 02:18:18 Get A/D value=-858993460 result=40 02:18:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:18:18 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:18:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:18:18 Aux= 02:18:18 Message to Camera, serial 49919 queued 02:18:55 Received message from Master: op=PointingHead serial=49932 02:18:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:18:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:18:55 Point started: ret=0 02:18:55 point_skyscan result=0 02:18:56 Check angles 02:18:56 SkyScan query 02:18:56 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 02:18:56 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 02:18:57 Check angles 02:18:57 SkyScan query 02:18:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:18:57 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:18:57 Message to Master queued w/err=0: serial=49932 error=0 02:19:02 Received message from Master: op=Filter serial=49933 02:19:02 Color wheel filter change from 0 to 0 02:19:02 FLIGetFilterPos err=0 currentPosition=0 02:19:02 FLIGetStepsRemaining err=0 RemainingSteps=0 02:19:02 Filter is already there-color wheel unchanged 02:19:02 Received message from Master: op=Shutter serial=49934 02:19:02 Shutter LASER open 02:19:02 Received message from Camera: op=State serial=49936 02:19:02 GetSingleValue result=40 Value=cccccccc 02:19:02 SkyScan query 02:19:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:19:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:19:03 Parameters OK 02:19:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:19:03 Set A/D data flow result=40 02:19:03 Set A/D channel type result=40 02:19:03 Set A/D encoding result=40 02:19:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:19:03 Set channel filter=0.000000e+000 result=40 02:19:03 Config A/D Result=40 02:19:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:19:03 Get A/D filter: -9.255963e+061 result=40 02:19:03 Get A/D value=-858993460 result=40 02:19:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:19:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:19:03 Parameters OK 02:19:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:19:03 Set A/D data flow result=40 02:19:03 Set A/D channel type result=40 02:19:03 Set A/D encoding result=40 02:19:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:19:03 Set channel filter=0.000000e+000 result=40 02:19:03 Config A/D Result=40 02:19:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:19:03 Get A/D filter: -9.255963e+061 result=40 02:19:03 Get A/D value=-858993460 result=40 02:19:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:19:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:19:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:19:03 Aux= 02:19:03 Message to Camera, serial 49936 queued 02:19:11 Received message from Master: op=Shutter serial=49946 02:19:11 Shutter LASER close 02:19:12 Received message from Master: op=PointingHead serial=49950 02:19:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:19:12 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:19:12 Point started: ret=0 02:19:12 point_skyscan result=0 02:19:13 Check angles 02:19:13 SkyScan query 02:19:14 SkyScan query done: ret=0 az=136.5<-9100 ze=-142.71<-21514 Statuses=0009 0009 02:19:14 Msec=0 True Az=136.5 Ze=-142.71 Az status=0009 Ze status=0009 02:19:14 Check angles 02:19:14 SkyScan query 02:19:15 SkyScan query done: ret=0 az=154.305<-10287 ze=-121.365<-20091 Statuses=0009 0009 02:19:15 Msec=750 True Az=154.305 Ze=-121.365 Az status=0009 Ze status=0009 02:19:15 Check angles 02:19:15 SkyScan query 02:19:15 SkyScan query done: ret=0 az=171.765<-11451 ze=-100.29<-18686 Statuses=0009 0009 02:19:15 Msec=1500 True Az=171.765 Ze=-100.29 Az status=0009 Ze status=0009 02:19:15 Check angles 02:19:15 SkyScan query 02:19:16 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.425<-17295 Statuses=0008 0009 02:19:16 Msec=2250 True Az=176.025 Ze=-79.425 Az status=0008 Ze status=0009 02:19:16 Check angles 02:19:16 SkyScan query 02:19:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.425<-15895 Statuses=0008 0009 02:19:17 Msec=3000 True Az=175.995 Ze=-58.425 Az status=0008 Ze status=0009 02:19:17 Check angles 02:19:17 SkyScan query 02:19:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 02:19:18 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 02:19:18 Message to Master queued w/err=0: serial=49950 error=0 02:19:23 Received message from Master: op=Filter serial=49951 02:19:23 Color wheel filter change from 0 to 0 02:19:23 FLIGetFilterPos err=0 currentPosition=0 02:19:23 FLIGetStepsRemaining err=0 RemainingSteps=0 02:19:23 Filter is already there-color wheel unchanged 02:19:23 Received message from Master: op=Shutter serial=49952 02:19:23 Shutter LASER close 02:19:23 Received message from Camera: op=State serial=49954 02:19:23 GetSingleValue result=40 Value=cccccccc 02:19:23 SkyScan query 02:19:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:19:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:19:23 Parameters OK 02:19:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:19:23 Set A/D data flow result=40 02:19:23 Set A/D channel type result=40 02:19:23 Set A/D encoding result=40 02:19:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:19:23 Set channel filter=0.000000e+000 result=40 02:19:23 Config A/D Result=40 02:19:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:19:23 Get A/D filter: -9.255963e+061 result=40 02:19:23 Get A/D value=-858993460 result=40 02:19:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:19:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:19:23 Parameters OK 02:19:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:19:23 Set A/D data flow result=40 02:19:23 Set A/D channel type result=40 02:19:23 Set A/D encoding result=40 02:19:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:19:23 Set channel filter=0.000000e+000 result=40 02:19:23 Config A/D Result=40 02:19:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:19:23 Get A/D filter: -9.255963e+061 result=40 02:19:23 Get A/D value=-858993460 result=40 02:19:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:19:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:19:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:19:23 Aux= 02:19:23 Message to Camera, serial 49954 queued 02:20:00 Received message from Master: op=PointingHead serial=49967 02:20:00 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:20:00 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:20:01 Point started: ret=0 02:20:01 point_skyscan result=0 02:20:01 Check angles 02:20:01 SkyScan query 02:20:02 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.735<-13449 Statuses=0009 0009 02:20:02 Msec=0 True Az=152.955 Ze=-21.735 Az status=0009 Ze status=0009 02:20:02 Check angles 02:20:02 SkyScan query 02:20:03 SkyScan query done: ret=0 az=135.525<-9035 ze=-0.735<-12049 Statuses=0009 0009 02:20:03 Msec=750 True Az=135.525 Ze=-0.735 Az status=0009 Ze status=0009 02:20:03 Check angles 02:20:03 SkyScan query 02:20:03 SkyScan query done: ret=0 az=117.945<-7863 ze=20.205<-10653 Statuses=0009 0009 02:20:03 Msec=1500 True Az=117.945 Ze=20.205 Az status=0009 Ze status=0009 02:20:04 Check angles 02:20:04 SkyScan query 02:20:04 SkyScan query done: ret=0 az=100.425<-6695 ze=41.19<-9254 Statuses=0009 0009 02:20:04 Msec=2250 True Az=100.425 Ze=41.19 Az status=0009 Ze status=0009 02:20:04 Check angles 02:20:04 SkyScan query 02:20:05 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 02:20:05 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 02:20:05 Check angles 02:20:05 SkyScan query 02:20:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:20:06 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:20:06 Message to Master queued w/err=0: serial=49967 error=0 02:20:11 Received message from Master: op=Filter serial=49968 02:20:11 Color wheel filter change from 0 to 0 02:20:11 FLIGetFilterPos err=0 currentPosition=0 02:20:11 FLIGetStepsRemaining err=0 RemainingSteps=0 02:20:11 Filter is already there-color wheel unchanged 02:20:11 Received message from Master: op=Shutter serial=49969 02:20:11 Shutter LASER close 02:20:11 Received message from Camera: op=State serial=49971 02:20:11 GetSingleValue result=40 Value=cccccccc 02:20:11 SkyScan query 02:20:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:20:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:20:12 Parameters OK 02:20:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:20:12 Set A/D data flow result=40 02:20:12 Set A/D channel type result=40 02:20:12 Set A/D encoding result=40 02:20:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:20:12 Set channel filter=0.000000e+000 result=40 02:20:12 Config A/D Result=40 02:20:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:20:12 Get A/D filter: -9.255963e+061 result=40 02:20:12 Get A/D value=-858993460 result=40 02:20:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:20:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:20:12 Parameters OK 02:20:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:20:12 Set A/D data flow result=40 02:20:12 Set A/D channel type result=40 02:20:12 Set A/D encoding result=40 02:20:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:20:12 Set channel filter=0.000000e+000 result=40 02:20:12 Config A/D Result=40 02:20:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:20:12 Get A/D filter: -9.255963e+061 result=40 02:20:12 Get A/D value=-858993460 result=40 02:20:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:20:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:20:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:20:12 Aux= 02:20:12 Message to Camera, serial 49971 queued 02:20:48 Received message from Master: op=PointingHead serial=49984 02:20:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:20:48 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:20:49 Point started: ret=0 02:20:49 point_skyscan result=0 02:20:49 Check angles 02:20:49 SkyScan query 02:20:50 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 02:20:50 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 02:20:50 Check angles 02:20:50 SkyScan query 02:20:51 SkyScan query done: ret=0 az=126.525<-8435 ze=38.505<-9433 Statuses=0009 0008 02:20:51 Msec=750 True Az=126.525 Ze=38.505 Az status=0009 Ze status=0008 02:20:51 Check angles 02:20:51 SkyScan query 02:20:52 SkyScan query done: ret=0 az=144.18<-9612 ze=38.505<-9433 Statuses=0009 0008 02:20:52 Msec=1500 True Az=144.18 Ze=38.505 Az status=0009 Ze status=0008 02:20:52 Check angles 02:20:52 SkyScan query 02:20:52 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 02:20:52 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 02:20:52 Check angles 02:20:52 SkyScan query 02:20:53 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 02:20:53 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 02:20:53 Check angles 02:20:53 SkyScan query 02:20:54 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 02:20:54 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 02:20:54 Message to Master queued w/err=0: serial=49984 error=0 02:20:59 Received message from Master: op=Filter serial=49985 02:20:59 Color wheel filter change from 0 to 0 02:20:59 FLIGetFilterPos err=0 currentPosition=0 02:20:59 FLIGetStepsRemaining err=0 RemainingSteps=0 02:20:59 Filter is already there-color wheel unchanged 02:20:59 Received message from Master: op=Shutter serial=49986 02:20:59 Shutter LASER close 02:20:59 Received message from Camera: op=State serial=49988 02:20:59 GetSingleValue result=40 Value=cccccccc 02:20:59 SkyScan query 02:21:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:21:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:21:00 Parameters OK 02:21:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:21:00 Set A/D data flow result=40 02:21:00 Set A/D channel type result=40 02:21:00 Set A/D encoding result=40 02:21:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:21:00 Set channel filter=0.000000e+000 result=40 02:21:00 Config A/D Result=40 02:21:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:21:00 Get A/D filter: -9.255963e+061 result=40 02:21:00 Get A/D value=-858993460 result=40 02:21:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:21:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:21:00 Parameters OK 02:21:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:21:00 Set A/D data flow result=40 02:21:00 Set A/D channel type result=40 02:21:00 Set A/D encoding result=40 02:21:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:21:00 Set channel filter=0.000000e+000 result=40 02:21:00 Config A/D Result=40 02:21:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:21:00 Get A/D filter: -9.255963e+061 result=40 02:21:00 Get A/D value=-858993460 result=40 02:21:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:21:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:21:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:21:00 Aux= 02:21:00 Message to Camera, serial 49988 queued 02:21:36 Received message from Master: op=PointingHead serial=50001 02:21:36 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:21:36 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:21:37 Point started: ret=0 02:21:37 point_skyscan result=0 02:21:38 Check angles 02:21:38 SkyScan query 02:21:38 SkyScan query done: ret=0 az=152.805<-10187 ze=8.58<-11428 Statuses=0009 0009 02:21:38 Msec=0 True Az=152.805 Ze=8.58 Az status=0009 Ze status=0009 02:21:38 Check angles 02:21:38 SkyScan query 02:21:39 SkyScan query done: ret=0 az=135.45<-9030 ze=-12.39<-12826 Statuses=0009 0009 02:21:39 Msec=750 True Az=135.45 Ze=-12.39 Az status=0009 Ze status=0009 02:21:39 Check angles 02:21:39 SkyScan query 02:21:40 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.3<-14220 Statuses=0009 0009 02:21:40 Msec=1500 True Az=117.795 Ze=-33.3 Az status=0009 Ze status=0009 02:21:40 Check angles 02:21:40 SkyScan query 02:21:40 SkyScan query done: ret=0 az=100.395<-6693 ze=-51.54<-15436 Statuses=0009 0009 02:21:40 Msec=2250 True Az=100.395 Ze=-51.54 Az status=0009 Ze status=0009 02:21:41 Check angles 02:21:41 SkyScan query 02:21:41 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 02:21:41 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 02:21:41 Check angles 02:21:41 SkyScan query 02:21:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:21:42 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:21:42 Message to Master queued w/err=0: serial=50001 error=0 02:21:47 Received message from Master: op=Filter serial=50002 02:21:47 Color wheel filter change from 0 to 0 02:21:47 FLIGetFilterPos err=0 currentPosition=0 02:21:47 FLIGetStepsRemaining err=0 RemainingSteps=0 02:21:47 Filter is already there-color wheel unchanged 02:21:47 Received message from Master: op=Shutter serial=50003 02:21:47 Shutter LASER close 02:21:47 Received message from Camera: op=State serial=50005 02:21:47 GetSingleValue result=40 Value=cccccccc 02:21:47 SkyScan query 02:21:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:21:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:21:48 Parameters OK 02:21:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:21:48 Set A/D data flow result=40 02:21:48 Set A/D channel type result=40 02:21:48 Set A/D encoding result=40 02:21:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:21:48 Set channel filter=0.000000e+000 result=40 02:21:48 Config A/D Result=40 02:21:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:21:48 Get A/D filter: -9.255963e+061 result=40 02:21:48 Get A/D value=-858993460 result=40 02:21:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:21:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:21:48 Parameters OK 02:21:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:21:48 Set A/D data flow result=40 02:21:48 Set A/D channel type result=40 02:21:48 Set A/D encoding result=40 02:21:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:21:48 Set channel filter=0.000000e+000 result=40 02:21:48 Config A/D Result=40 02:21:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:21:48 Get A/D filter: -9.255963e+061 result=40 02:21:48 Get A/D value=-858993460 result=40 02:21:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:21:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:21:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:21:48 Aux= 02:21:48 Message to Camera, serial 50005 queued 02:22:25 Received message from Master: op=PointingHead serial=50018 02:22:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:22:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:22:25 Point started: ret=0 02:22:25 point_skyscan result=0 02:22:26 Check angles 02:22:26 SkyScan query 02:22:26 SkyScan query done: ret=0 az=109.245<-7283 ze=-81.555<-17437 Statuses=0009 0009 02:22:26 Msec=0 True Az=109.245 Ze=-81.555 Az status=0009 Ze status=0009 02:22:26 Check angles 02:22:26 SkyScan query 02:22:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.54<-18836 Statuses=0008 0009 02:22:27 Msec=750 True Az=112.995 Ze=-102.54 Az status=0008 Ze status=0009 02:22:27 Check angles 02:22:27 SkyScan query 02:22:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.48<-20232 Statuses=0008 0009 02:22:28 Msec=1500 True Az=112.995 Ze=-123.48 Az status=0008 Ze status=0009 02:22:28 Check angles 02:22:28 SkyScan query 02:22:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.495<-21633 Statuses=0008 0009 02:22:28 Msec=2250 True Az=112.995 Ze=-144.495 Az status=0008 Ze status=0009 02:22:29 Check angles 02:22:29 SkyScan query 02:22:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.39<-23026 Statuses=0008 0009 02:22:29 Msec=3000 True Az=112.995 Ze=-165.39 Az status=0008 Ze status=0009 02:22:29 Check angles 02:22:29 SkyScan query 02:22:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:22:30 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:22:30 Message to Master queued w/err=0: serial=50018 error=0 02:22:35 Received message from Master: op=Filter serial=50019 02:22:35 Color wheel filter change from 0 to 0 02:22:35 FLIGetFilterPos err=0 currentPosition=0 02:22:35 FLIGetStepsRemaining err=0 RemainingSteps=0 02:22:35 Filter is already there-color wheel unchanged 02:22:35 Received message from Master: op=Shutter serial=50020 02:22:35 Shutter LASER open 02:22:35 Received message from Camera: op=State serial=50022 02:22:35 GetSingleValue result=40 Value=cccccccc 02:22:35 SkyScan query 02:22:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:22:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:22:36 Parameters OK 02:22:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:22:36 Set A/D data flow result=40 02:22:36 Set A/D channel type result=40 02:22:36 Set A/D encoding result=40 02:22:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:22:36 Set channel filter=0.000000e+000 result=40 02:22:36 Config A/D Result=40 02:22:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:22:36 Get A/D filter: -9.255963e+061 result=40 02:22:36 Get A/D value=-858993460 result=40 02:22:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:22:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:22:36 Parameters OK 02:22:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:22:36 Set A/D data flow result=40 02:22:36 Set A/D channel type result=40 02:22:36 Set A/D encoding result=40 02:22:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:22:36 Set channel filter=0.000000e+000 result=40 02:22:36 Config A/D Result=40 02:22:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:22:36 Get A/D filter: -9.255963e+061 result=40 02:22:36 Get A/D value=-858993460 result=40 02:22:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:22:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:22:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:22:36 Aux= 02:22:36 Message to Camera, serial 50022 queued 02:22:44 Received message from Master: op=Shutter serial=50032 02:22:44 Shutter LASER close 02:22:45 Received message from Master: op=PointingHead serial=50036 02:22:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:22:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:22:45 Point started: ret=0 02:22:45 point_skyscan result=0 02:22:46 Check angles 02:22:46 SkyScan query 02:22:46 SkyScan query done: ret=0 az=89.685<-5979 ze=157.035<-1531 Statuses=0009 0009 02:22:46 Msec=0 True Az=89.685 Ze=157.035 Az status=0009 Ze status=0009 02:22:47 Check angles 02:22:47 SkyScan query 02:22:47 SkyScan query done: ret=0 az=71.85<-4790 ze=135.615<-2959 Statuses=0009 0009 02:22:47 Msec=750 True Az=71.85 Ze=135.615 Az status=0009 Ze status=0009 02:22:47 Check angles 02:22:47 SkyScan query 02:22:48 SkyScan query done: ret=0 az=54.645<-3643 ze=114.66<-4356 Statuses=0009 0009 02:22:48 Msec=1500 True Az=54.645 Ze=114.66 Az status=0009 Ze status=0009 02:22:48 Check angles 02:22:48 SkyScan query 02:22:49 SkyScan query done: ret=0 az=40.92<-2728 ze=93.72<-5752 Statuses=0009 0009 02:22:49 Msec=2250 True Az=40.92 Ze=93.72 Az status=0009 Ze status=0009 02:22:49 Check angles 02:22:49 SkyScan query 02:22:49 SkyScan query done: ret=0 az=40.995<-2733 ze=72.735<-7151 Statuses=0008 0009 02:22:49 Msec=3000 True Az=40.995 Ze=72.735 Az status=0008 Ze status=0009 02:22:50 Check angles 02:22:50 SkyScan query 02:22:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.44<-8504 Statuses=0008 0009 02:22:50 Msec=3750 True Az=40.995 Ze=52.44 Az status=0008 Ze status=0009 02:22:50 Check angles 02:22:50 SkyScan query 02:22:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:22:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:22:51 Message to Master queued w/err=0: serial=50036 error=0 02:22:56 Received message from Master: op=Filter serial=50037 02:22:56 Color wheel filter change from 0 to 0 02:22:56 FLIGetFilterPos err=0 currentPosition=0 02:22:56 FLIGetStepsRemaining err=0 RemainingSteps=0 02:22:56 Filter is already there-color wheel unchanged 02:22:56 Received message from Master: op=Shutter serial=50038 02:22:56 Shutter LASER close 02:22:56 Received message from Camera: op=State serial=50040 02:22:56 GetSingleValue result=40 Value=cccccccc 02:22:56 SkyScan query 02:22:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:22:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:22:57 Parameters OK 02:22:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:22:57 Set A/D data flow result=40 02:22:57 Set A/D channel type result=40 02:22:57 Set A/D encoding result=40 02:22:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:22:57 Set channel filter=0.000000e+000 result=40 02:22:57 Config A/D Result=40 02:22:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:22:57 Get A/D filter: -9.255963e+061 result=40 02:22:57 Get A/D value=-858993460 result=40 02:22:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:22:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:22:57 Parameters OK 02:22:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:22:57 Set A/D data flow result=40 02:22:57 Set A/D channel type result=40 02:22:57 Set A/D encoding result=40 02:22:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:22:57 Set channel filter=0.000000e+000 result=40 02:22:57 Config A/D Result=40 02:22:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:22:57 Get A/D filter: -9.255963e+061 result=40 02:22:57 Get A/D value=-858993460 result=40 02:22:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:22:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:22:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:22:57 Aux= 02:22:57 Message to Camera, serial 50040 queued 02:23:33 Received message from Master: op=PointingHead serial=50052 02:23:33 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 02:23:33 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 02:23:33 Point started: ret=0 02:23:33 point_skyscan result=0 02:23:34 Check angles 02:23:34 SkyScan query 02:23:34 SkyScan query done: ret=0 az=63.735<-4249 ze=66.555<-7563 Statuses=0009 0008 02:23:34 Msec=0 True Az=63.735 Ze=66.555 Az status=0009 Ze status=0008 02:23:35 Check angles 02:23:35 SkyScan query 02:23:35 SkyScan query done: ret=0 az=81.105<-5407 ze=66.495<-7567 Statuses=0009 0008 02:23:35 Msec=750 True Az=81.105 Ze=66.495 Az status=0009 Ze status=0008 02:23:35 Check angles 02:23:35 SkyScan query 02:23:36 SkyScan query done: ret=0 az=98.64<-6576 ze=66.495<-7567 Statuses=0009 0008 02:23:36 Msec=1500 True Az=98.64 Ze=66.495 Az status=0009 Ze status=0008 02:23:36 Check angles 02:23:36 SkyScan query 02:23:37 SkyScan query done: ret=0 az=116.76<-7784 ze=66.495<-7567 Statuses=0009 0008 02:23:37 Msec=2250 True Az=116.76 Ze=66.495 Az status=0009 Ze status=0008 02:23:37 Check angles 02:23:37 SkyScan query 02:23:37 SkyScan query done: ret=0 az=134.445<-8963 ze=66.495<-7567 Statuses=0009 0008 02:23:37 Msec=3000 True Az=134.445 Ze=66.495 Az status=0009 Ze status=0008 02:23:38 Check angles 02:23:38 SkyScan query 02:23:38 SkyScan query done: ret=0 az=151.935<-10129 ze=66.495<-7567 Statuses=0009 0008 02:23:38 Msec=3750 True Az=151.935 Ze=66.495 Az status=0009 Ze status=0008 02:23:38 Check angles 02:23:38 SkyScan query 02:23:39 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:23:39 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 02:23:39 Message to Master queued w/err=0: serial=50052 error=0 02:23:44 Received message from Master: op=Filter serial=50053 02:23:44 Color wheel filter change from 0 to 0 02:23:44 FLIGetFilterPos err=0 currentPosition=0 02:23:44 FLIGetStepsRemaining err=0 RemainingSteps=0 02:23:44 Filter is already there-color wheel unchanged 02:23:44 Received message from Master: op=Shutter serial=50054 02:23:44 Shutter LASER close 02:23:44 Received message from Camera: op=State serial=50056 02:23:44 GetSingleValue result=40 Value=cccccccc 02:23:44 SkyScan query 02:23:45 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:23:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:23:45 Parameters OK 02:23:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:23:45 Set A/D data flow result=40 02:23:45 Set A/D channel type result=40 02:23:45 Set A/D encoding result=40 02:23:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:23:45 Set channel filter=0.000000e+000 result=40 02:23:45 Config A/D Result=40 02:23:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:23:45 Get A/D filter: -9.255963e+061 result=40 02:23:45 Get A/D value=-858993460 result=40 02:23:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:23:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:23:45 Parameters OK 02:23:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:23:45 Set A/D data flow result=40 02:23:45 Set A/D channel type result=40 02:23:45 Set A/D encoding result=40 02:23:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:23:45 Set channel filter=0.000000e+000 result=40 02:23:45 Config A/D Result=40 02:23:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:23:45 Get A/D filter: -9.255963e+061 result=40 02:23:45 Get A/D value=-858993460 result=40 02:23:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:23:45 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:23:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:23:45 Aux= 02:23:45 Message to Camera, serial 50056 queued 02:24:22 Received message from Master: op=PointingHead serial=50069 02:24:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:24:22 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:24:22 Point started: ret=0 02:24:22 point_skyscan result=0 02:24:23 Check angles 02:24:23 SkyScan query 02:24:23 SkyScan query done: ret=0 az=134.745<-8983 ze=36.42<-9572 Statuses=0009 0009 02:24:23 Msec=0 True Az=134.745 Ze=36.42 Az status=0009 Ze status=0009 02:24:23 Check angles 02:24:23 SkyScan query 02:24:24 SkyScan query done: ret=0 az=116.85<-7790 ze=15.045<-10997 Statuses=0009 0009 02:24:24 Msec=750 True Az=116.85 Ze=15.045 Az status=0009 Ze status=0009 02:24:24 Check angles 02:24:24 SkyScan query 02:24:25 SkyScan query done: ret=0 az=99.495<-6633 ze=-5.925<-12395 Statuses=0009 0009 02:24:25 Msec=1500 True Az=99.495 Ze=-5.925 Az status=0009 Ze status=0009 02:24:25 Check angles 02:24:25 SkyScan query 02:24:26 SkyScan query done: ret=0 az=82.065<-5471 ze=-26.85<-13790 Statuses=0009 0009 02:24:26 Msec=2250 True Az=82.065 Ze=-26.85 Az status=0009 Ze status=0009 02:24:26 Check angles 02:24:26 SkyScan query 02:24:26 SkyScan query done: ret=0 az=64.545<-4303 ze=-38.58<-14572 Statuses=0009 0008 02:24:26 Msec=3000 True Az=64.545 Ze=-38.58 Az status=0009 Ze status=0008 02:24:26 Check angles 02:24:26 SkyScan query 02:24:27 SkyScan query done: ret=0 az=47.1<-3140 ze=-38.52<-14568 Statuses=0009 0008 02:24:27 Msec=3750 True Az=47.1 Ze=-38.52 Az status=0009 Ze status=0008 02:24:27 Check angles 02:24:27 SkyScan query 02:24:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:24:28 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 02:24:28 Message to Master queued w/err=0: serial=50069 error=0 02:24:33 Received message from Master: op=Filter serial=50070 02:24:33 Color wheel filter change from 0 to 0 02:24:33 FLIGetFilterPos err=0 currentPosition=0 02:24:33 FLIGetStepsRemaining err=0 RemainingSteps=0 02:24:33 Filter is already there-color wheel unchanged 02:24:33 Received message from Master: op=Shutter serial=50071 02:24:33 Shutter LASER close 02:24:33 Received message from Camera: op=State serial=50073 02:24:33 GetSingleValue result=40 Value=cccccccc 02:24:33 SkyScan query 02:24:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:24:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:24:34 Parameters OK 02:24:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:24:34 Set A/D data flow result=40 02:24:34 Set A/D channel type result=40 02:24:34 Set A/D encoding result=40 02:24:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:24:34 Set channel filter=0.000000e+000 result=40 02:24:34 Config A/D Result=40 02:24:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:24:34 Get A/D filter: -9.255963e+061 result=40 02:24:34 Get A/D value=-858993460 result=40 02:24:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:24:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:24:34 Parameters OK 02:24:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:24:34 Set A/D data flow result=40 02:24:34 Set A/D channel type result=40 02:24:34 Set A/D encoding result=40 02:24:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:24:34 Set channel filter=0.000000e+000 result=40 02:24:34 Config A/D Result=40 02:24:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:24:34 Get A/D filter: -9.255963e+061 result=40 02:24:34 Get A/D value=-858993460 result=40 02:24:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:24:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:24:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:24:34 Aux= 02:24:34 Message to Camera, serial 50073 queued 02:25:10 Received message from Master: op=PointingHead serial=50086 02:25:10 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:25:10 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:25:11 Point started: ret=0 02:25:11 point_skyscan result=0 02:25:12 Check angles 02:25:12 SkyScan query 02:25:12 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.13<-16542 Statuses=0009 0009 02:25:12 Msec=0 True Az=63.795 Ze=-68.13 Az status=0009 Ze status=0009 02:25:12 Check angles 02:25:12 SkyScan query 02:25:13 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.58<-17972 Statuses=0009 0009 02:25:13 Msec=750 True Az=81.585 Ze=-89.58 Az status=0009 Ze status=0009 02:25:13 Check angles 02:25:13 SkyScan query 02:25:14 SkyScan query done: ret=0 az=99.69<-6646 ze=-110.955<-19397 Statuses=0009 0009 02:25:14 Msec=1500 True Az=99.69 Ze=-110.955 Az status=0009 Ze status=0009 02:25:14 Check angles 02:25:14 SkyScan query 02:25:14 SkyScan query done: ret=0 az=117.15<-7810 ze=-131.88<-20792 Statuses=0009 0009 02:25:14 Msec=2250 True Az=117.15 Ze=-131.88 Az status=0009 Ze status=0009 02:25:15 Check angles 02:25:15 SkyScan query 02:25:15 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.555<-21437 Statuses=0009 0008 02:25:15 Msec=3000 True Az=131.115 Ze=-141.555 Az status=0009 Ze status=0008 02:25:15 Check angles 02:25:15 SkyScan query 02:25:16 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 02:25:16 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 02:25:16 Message to Master queued w/err=0: serial=50086 error=0 02:25:21 Received message from Master: op=Filter serial=50087 02:25:21 Color wheel filter change from 0 to 0 02:25:21 FLIGetFilterPos err=0 currentPosition=0 02:25:21 FLIGetStepsRemaining err=0 RemainingSteps=0 02:25:21 Filter is already there-color wheel unchanged 02:25:21 Received message from Master: op=Shutter serial=50088 02:25:21 Shutter LASER close 02:25:21 Received message from Camera: op=State serial=50090 02:25:21 GetSingleValue result=40 Value=cccccccc 02:25:21 SkyScan query 02:25:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:25:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:25:22 Parameters OK 02:25:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:25:22 Set A/D data flow result=40 02:25:22 Set A/D channel type result=40 02:25:22 Set A/D encoding result=40 02:25:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:25:22 Set channel filter=0.000000e+000 result=40 02:25:22 Config A/D Result=40 02:25:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:25:22 Get A/D filter: -9.255963e+061 result=40 02:25:22 Get A/D value=-858993460 result=40 02:25:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:25:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:25:22 Parameters OK 02:25:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:25:22 Set A/D data flow result=40 02:25:22 Set A/D channel type result=40 02:25:22 Set A/D encoding result=40 02:25:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:25:22 Set channel filter=0.000000e+000 result=40 02:25:22 Config A/D Result=40 02:25:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:25:22 Get A/D filter: -9.255963e+061 result=40 02:25:22 Get A/D value=-858993460 result=40 02:25:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:25:22 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:25:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:25:22 Aux= 02:25:22 Message to Camera, serial 50090 queued 02:25:58 Received message from Master: op=PointingHead serial=50103 02:25:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:25:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:25:59 Point started: ret=0 02:25:59 point_skyscan result=0 02:26:00 Check angles 02:26:00 SkyScan query 02:26:00 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 02:26:00 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 02:26:00 Check angles 02:26:00 SkyScan query 02:26:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:26:01 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:26:01 Message to Master queued w/err=0: serial=50103 error=0 02:26:06 Received message from Master: op=Filter serial=50104 02:26:06 Color wheel filter change from 0 to 0 02:26:06 FLIGetFilterPos err=0 currentPosition=0 02:26:06 FLIGetStepsRemaining err=0 RemainingSteps=0 02:26:06 Filter is already there-color wheel unchanged 02:26:06 Received message from Master: op=Shutter serial=50105 02:26:06 Shutter LASER open 02:26:06 Received message from Camera: op=State serial=50107 02:26:06 GetSingleValue result=40 Value=cccccccc 02:26:06 SkyScan query 02:26:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:26:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:26:07 Parameters OK 02:26:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:26:07 Set A/D data flow result=40 02:26:07 Set A/D channel type result=40 02:26:07 Set A/D encoding result=40 02:26:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:26:07 Set channel filter=0.000000e+000 result=40 02:26:07 Config A/D Result=40 02:26:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:26:07 Get A/D filter: -9.255963e+061 result=40 02:26:07 Get A/D value=-858993460 result=40 02:26:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:26:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:26:07 Parameters OK 02:26:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:26:07 Set A/D data flow result=40 02:26:07 Set A/D channel type result=40 02:26:07 Set A/D encoding result=40 02:26:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:26:07 Set channel filter=0.000000e+000 result=40 02:26:07 Config A/D Result=40 02:26:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:26:07 Get A/D filter: -9.255963e+061 result=40 02:26:07 Get A/D value=-858993460 result=40 02:26:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:26:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:26:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:26:07 Aux= 02:26:07 Message to Camera, serial 50107 queued 02:26:15 Received message from Master: op=Shutter serial=50117 02:26:15 Shutter LASER close 02:26:16 Received message from Master: op=PointingHead serial=50121 02:26:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:26:16 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:26:16 Point started: ret=0 02:26:16 point_skyscan result=0 02:26:17 Check angles 02:26:17 SkyScan query 02:26:17 SkyScan query done: ret=0 az=135.795<-9053 ze=-143.43<-21562 Statuses=0009 0009 02:26:17 Msec=0 True Az=135.795 Ze=-143.43 Az status=0009 Ze status=0009 02:26:18 Check angles 02:26:18 SkyScan query [UTC 2018-12-11 02:26:18] 02:26:18 SkyScan query done: ret=0 az=153.675<-10245 ze=-122.025<-20135 Statuses=0009 0009 02:26:18 Msec=750 True Az=153.675 Ze=-122.025 Az status=0009 Ze status=0009 02:26:18 Check angles 02:26:18 SkyScan query 02:26:19 SkyScan query done: ret=0 az=171.045<-11403 ze=-101.115<-18741 Statuses=0009 0009 02:26:19 Msec=1500 True Az=171.045 Ze=-101.115 Az status=0009 Ze status=0009 02:26:19 Check angles 02:26:19 SkyScan query 02:26:20 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.175<-17345 Statuses=0008 0009 02:26:20 Msec=2250 True Az=176.025 Ze=-80.175 Az status=0008 Ze status=0009 02:26:20 Check angles 02:26:20 SkyScan query 02:26:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.74<-15916 Statuses=0008 0009 02:26:21 Msec=3000 True Az=175.995 Ze=-58.74 Az status=0008 Ze status=0009 02:26:21 Check angles 02:26:21 SkyScan query 02:26:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:26:21 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:26:21 Message to Master queued w/err=0: serial=50121 error=0 02:26:26 Received message from Master: op=Filter serial=50122 02:26:26 Color wheel filter change from 0 to 0 02:26:26 FLIGetFilterPos err=0 currentPosition=0 02:26:26 FLIGetStepsRemaining err=0 RemainingSteps=0 02:26:26 Filter is already there-color wheel unchanged 02:26:26 Received message from Master: op=Shutter serial=50123 02:26:26 Shutter LASER close 02:26:27 Received message from Camera: op=State serial=50125 02:26:27 GetSingleValue result=40 Value=cccccccc 02:26:27 SkyScan query 02:26:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:26:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:26:27 Parameters OK 02:26:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:26:27 Set A/D data flow result=40 02:26:27 Set A/D channel type result=40 02:26:27 Set A/D encoding result=40 02:26:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:26:27 Set channel filter=0.000000e+000 result=40 02:26:27 Config A/D Result=40 02:26:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:26:27 Get A/D filter: -9.255963e+061 result=40 02:26:27 Get A/D value=-858993460 result=40 02:26:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:26:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:26:27 Parameters OK 02:26:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:26:27 Set A/D data flow result=40 02:26:27 Set A/D channel type result=40 02:26:27 Set A/D encoding result=40 02:26:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:26:27 Set channel filter=0.000000e+000 result=40 02:26:27 Config A/D Result=40 02:26:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:26:27 Get A/D filter: -9.255963e+061 result=40 02:26:27 Get A/D value=-858993460 result=40 02:26:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:26:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:26:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:26:27 Aux= 02:26:27 Message to Camera, serial 50125 queued 02:27:04 Received message from Master: op=PointingHead serial=50138 02:27:04 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:27:04 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:27:04 Point started: ret=0 02:27:04 point_skyscan result=0 02:27:05 Check angles 02:27:05 SkyScan query 02:27:06 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.555<-13437 Statuses=0009 0009 02:27:06 Msec=0 True Az=152.73 Ze=-21.555 Az status=0009 Ze status=0009 02:27:06 Check angles 02:27:06 SkyScan query 02:27:06 SkyScan query done: ret=0 az=134.745<-8983 ze=-0.03<-12002 Statuses=0009 0009 02:27:06 Msec=750 True Az=134.745 Ze=-0.03 Az status=0009 Ze status=0009 02:27:07 Check angles 02:27:07 SkyScan query 02:27:07 SkyScan query done: ret=0 az=117.27<-7818 ze=20.805<-10613 Statuses=0009 0009 02:27:07 Msec=1500 True Az=117.27 Ze=20.805 Az status=0009 Ze status=0009 02:27:07 Check angles 02:27:07 SkyScan query 02:27:08 SkyScan query done: ret=0 az=99.945<-6663 ze=41.76<-9216 Statuses=0009 0009 02:27:08 Msec=2250 True Az=99.945 Ze=41.76 Az status=0009 Ze status=0009 02:27:08 Check angles 02:27:08 SkyScan query 02:27:09 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 02:27:09 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 02:27:09 Check angles 02:27:09 SkyScan query 02:27:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:27:09 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:27:09 Message to Master queued w/err=0: serial=50138 error=0 02:27:14 Received message from Master: op=Filter serial=50139 02:27:14 Color wheel filter change from 0 to 0 02:27:14 FLIGetFilterPos err=0 currentPosition=0 02:27:14 FLIGetStepsRemaining err=0 RemainingSteps=0 02:27:14 Filter is already there-color wheel unchanged 02:27:15 Received message from Master: op=Shutter serial=50140 02:27:15 Shutter LASER close 02:27:15 Received message from Camera: op=State serial=50142 02:27:15 GetSingleValue result=40 Value=cccccccc 02:27:15 SkyScan query 02:27:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:27:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:27:15 Parameters OK 02:27:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:27:15 Set A/D data flow result=40 02:27:15 Set A/D channel type result=40 02:27:15 Set A/D encoding result=40 02:27:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:27:15 Set channel filter=0.000000e+000 result=40 02:27:15 Config A/D Result=40 02:27:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:27:15 Get A/D filter: -9.255963e+061 result=40 02:27:15 Get A/D value=-858993460 result=40 02:27:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:27:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:27:15 Parameters OK 02:27:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:27:15 Set A/D data flow result=40 02:27:15 Set A/D channel type result=40 02:27:15 Set A/D encoding result=40 02:27:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:27:15 Set channel filter=0.000000e+000 result=40 02:27:15 Config A/D Result=40 02:27:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:27:15 Get A/D filter: -9.255963e+061 result=40 02:27:15 Get A/D value=-858993460 result=40 02:27:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:27:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:27:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:27:15 Aux= 02:27:15 Message to Camera, serial 50142 queued 02:27:52 Received message from Master: op=PointingHead serial=50155 02:27:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:27:52 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:27:52 Point started: ret=0 02:27:52 point_skyscan result=0 02:27:53 Check angles 02:27:53 SkyScan query 02:27:54 SkyScan query done: ret=0 az=109.23<-7282 ze=38.49<-9434 Statuses=0009 0008 02:27:54 Msec=0 True Az=109.23 Ze=38.49 Az status=0009 Ze status=0008 02:27:54 Check angles 02:27:54 SkyScan query 02:27:55 SkyScan query done: ret=0 az=126.72<-8448 ze=38.505<-9433 Statuses=0009 0008 02:27:55 Msec=750 True Az=126.72 Ze=38.505 Az status=0009 Ze status=0008 02:27:55 Check angles 02:27:55 SkyScan query 02:27:55 SkyScan query done: ret=0 az=144.165<-9611 ze=38.505<-9433 Statuses=0009 0008 02:27:55 Msec=1500 True Az=144.165 Ze=38.505 Az status=0009 Ze status=0008 02:27:55 Check angles 02:27:55 SkyScan query 02:27:56 SkyScan query done: ret=0 az=161.565<-10771 ze=38.505<-9433 Statuses=0009 0008 02:27:56 Msec=2250 True Az=161.565 Ze=38.505 Az status=0009 Ze status=0008 02:27:56 Check angles 02:27:56 SkyScan query 02:27:57 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 02:27:57 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 02:27:57 Check angles 02:27:57 SkyScan query 02:27:58 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 02:27:58 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 02:27:58 Message to Master queued w/err=0: serial=50155 error=0 02:28:03 Received message from Master: op=Filter serial=50156 02:28:03 Color wheel filter change from 0 to 0 02:28:03 FLIGetFilterPos err=0 currentPosition=0 02:28:03 FLIGetStepsRemaining err=0 RemainingSteps=0 02:28:03 Filter is already there-color wheel unchanged 02:28:03 Received message from Master: op=Shutter serial=50157 02:28:03 Shutter LASER close 02:28:03 Received message from Camera: op=State serial=50159 02:28:03 GetSingleValue result=40 Value=cccccccc 02:28:03 SkyScan query 02:28:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:28:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:28:03 Parameters OK 02:28:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:28:03 Set A/D data flow result=40 02:28:03 Set A/D channel type result=40 02:28:03 Set A/D encoding result=40 02:28:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:28:03 Set channel filter=0.000000e+000 result=40 02:28:03 Config A/D Result=40 02:28:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:28:03 Get A/D filter: -9.255963e+061 result=40 02:28:03 Get A/D value=-858993460 result=40 02:28:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:28:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:28:03 Parameters OK 02:28:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:28:03 Set A/D data flow result=40 02:28:03 Set A/D channel type result=40 02:28:03 Set A/D encoding result=40 02:28:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:28:03 Set channel filter=0.000000e+000 result=40 02:28:03 Config A/D Result=40 02:28:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:28:03 Get A/D filter: -9.255963e+061 result=40 02:28:03 Get A/D value=-858993460 result=40 02:28:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:28:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:28:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:28:03 Aux= 02:28:03 Message to Camera, serial 50159 queued 02:28:40 Received message from Master: op=PointingHead serial=50172 02:28:40 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:28:40 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:28:41 Point started: ret=0 02:28:41 point_skyscan result=0 02:28:41 Check angles 02:28:41 SkyScan query 02:28:42 SkyScan query done: ret=0 az=152.61<-10174 ze=8.16<-11456 Statuses=0009 0009 02:28:42 Msec=0 True Az=152.61 Ze=8.16 Az status=0009 Ze status=0009 02:28:42 Check angles 02:28:42 SkyScan query 02:28:43 SkyScan query done: ret=0 az=134.655<-8977 ze=-13.185<-12879 Statuses=0009 0009 02:28:43 Msec=750 True Az=134.655 Ze=-13.185 Az status=0009 Ze status=0009 02:28:43 Check angles 02:28:43 SkyScan query 02:28:43 SkyScan query done: ret=0 az=117.21<-7814 ze=-34.2<-14280 Statuses=0009 0009 02:28:43 Msec=1500 True Az=117.21 Ze=-34.2 Az status=0009 Ze status=0009 02:28:44 Check angles 02:28:44 SkyScan query 02:28:44 SkyScan query done: ret=0 az=99.915<-6661 ze=-51.57<-15438 Statuses=0009 0009 02:28:44 Msec=2250 True Az=99.915 Ze=-51.57 Az status=0009 Ze status=0009 02:28:44 Check angles 02:28:44 SkyScan query 02:28:45 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 02:28:45 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 02:28:45 Check angles 02:28:45 SkyScan query 02:28:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:28:46 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:28:46 Message to Master queued w/err=0: serial=50172 error=0 02:28:51 Received message from Master: op=Filter serial=50173 02:28:51 Color wheel filter change from 0 to 0 02:28:51 FLIGetFilterPos err=0 currentPosition=0 02:28:51 FLIGetStepsRemaining err=0 RemainingSteps=0 02:28:51 Filter is already there-color wheel unchanged 02:28:51 Received message from Master: op=Shutter serial=50174 02:28:51 Shutter LASER close 02:28:51 Received message from Camera: op=State serial=50176 02:28:51 GetSingleValue result=40 Value=cccccccc 02:28:51 SkyScan query 02:28:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:28:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:28:52 Parameters OK 02:28:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:28:52 Set A/D data flow result=40 02:28:52 Set A/D channel type result=40 02:28:52 Set A/D encoding result=40 02:28:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:28:52 Set channel filter=0.000000e+000 result=40 02:28:52 Config A/D Result=40 02:28:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:28:52 Get A/D filter: -9.255963e+061 result=40 02:28:52 Get A/D value=-858993460 result=40 02:28:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:28:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:28:52 Parameters OK 02:28:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:28:52 Set A/D data flow result=40 02:28:52 Set A/D channel type result=40 02:28:52 Set A/D encoding result=40 02:28:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:28:52 Set channel filter=0.000000e+000 result=40 02:28:52 Config A/D Result=40 02:28:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:28:52 Get A/D filter: -9.255963e+061 result=40 02:28:52 Get A/D value=-858993460 result=40 02:28:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:28:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:28:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:28:52 Aux= 02:28:52 Message to Camera, serial 50176 queued 02:29:28 Received message from Master: op=PointingHead serial=50189 02:29:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:29:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:29:29 Point started: ret=0 02:29:29 point_skyscan result=0 02:29:29 Check angles 02:29:29 SkyScan query 02:29:30 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.255<-17417 Statuses=0009 0009 02:29:30 Msec=0 True Az=108.975 Ze=-81.255 Az status=0009 Ze status=0009 02:29:30 Check angles 02:29:30 SkyScan query 02:29:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.21<-18814 Statuses=0008 0009 02:29:31 Msec=750 True Az=112.995 Ze=-102.21 Az status=0008 Ze status=0009 02:29:31 Check angles 02:29:31 SkyScan query 02:29:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.15<-20210 Statuses=0008 0009 02:29:32 Msec=1500 True Az=112.995 Ze=-123.15 Az status=0008 Ze status=0009 02:29:32 Check angles 02:29:32 SkyScan query 02:29:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.09<-21606 Statuses=0008 0009 02:29:32 Msec=2250 True Az=112.995 Ze=-144.09 Az status=0008 Ze status=0009 02:29:32 Check angles 02:29:32 SkyScan query 02:29:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.06<-23004 Statuses=0008 0009 02:29:33 Msec=3000 True Az=112.995 Ze=-165.06 Az status=0008 Ze status=0009 02:29:33 Check angles 02:29:33 SkyScan query 02:29:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:29:34 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:29:34 Message to Master queued w/err=0: serial=50189 error=0 02:29:39 Received message from Master: op=Filter serial=50190 02:29:39 Color wheel filter change from 0 to 0 02:29:39 FLIGetFilterPos err=0 currentPosition=0 02:29:39 FLIGetStepsRemaining err=0 RemainingSteps=0 02:29:39 Filter is already there-color wheel unchanged 02:29:39 Received message from Master: op=Shutter serial=50191 02:29:39 Shutter LASER open 02:29:39 Received message from Camera: op=State serial=50193 02:29:39 GetSingleValue result=40 Value=cccccccc 02:29:39 SkyScan query 02:29:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:29:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:29:40 Parameters OK 02:29:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:29:40 Set A/D data flow result=40 02:29:40 Set A/D channel type result=40 02:29:40 Set A/D encoding result=40 02:29:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:29:40 Set channel filter=0.000000e+000 result=40 02:29:40 Config A/D Result=40 02:29:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:29:40 Get A/D filter: -9.255963e+061 result=40 02:29:40 Get A/D value=-858993460 result=40 02:29:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:29:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:29:40 Parameters OK 02:29:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:29:40 Set A/D data flow result=40 02:29:40 Set A/D channel type result=40 02:29:40 Set A/D encoding result=40 02:29:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:29:40 Set channel filter=0.000000e+000 result=40 02:29:40 Config A/D Result=40 02:29:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:29:40 Get A/D filter: -9.255963e+061 result=40 02:29:40 Get A/D value=-858993460 result=40 02:29:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:29:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:29:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:29:40 Aux= 02:29:40 Message to Camera, serial 50193 queued 02:29:48 Received message from Master: op=Shutter serial=50203 02:29:48 Shutter LASER close 02:29:49 Received message from Master: op=PointingHead serial=50207 02:29:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:29:49 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:29:49 Point started: ret=0 02:29:49 point_skyscan result=0 02:29:50 Check angles 02:29:50 SkyScan query 02:29:50 SkyScan query done: ret=0 az=90.18<-6012 ze=157.545<-1497 Statuses=0009 0009 02:29:50 Msec=0 True Az=90.18 Ze=157.545 Az status=0009 Ze status=0009 02:29:50 Check angles 02:29:50 SkyScan query 02:29:51 SkyScan query done: ret=0 az=72.675<-4845 ze=136.56<-2896 Statuses=0009 0009 02:29:51 Msec=750 True Az=72.675 Ze=136.56 Az status=0009 Ze status=0009 02:29:51 Check angles 02:29:51 SkyScan query 02:29:52 SkyScan query done: ret=0 az=54.9<-3660 ze=115.185<-4321 Statuses=0009 0009 02:29:52 Msec=1500 True Az=54.9 Ze=115.185 Az status=0009 Ze status=0009 02:29:52 Check angles 02:29:52 SkyScan query 02:29:53 SkyScan query done: ret=0 az=40.875<-2725 ze=94.215<-5719 Statuses=0009 0009 02:29:53 Msec=2250 True Az=40.875 Ze=94.215 Az status=0009 Ze status=0009 02:29:53 Check angles 02:29:53 SkyScan query 02:29:53 SkyScan query done: ret=0 az=40.995<-2733 ze=73.245<-7117 Statuses=0008 0009 02:29:53 Msec=3000 True Az=40.995 Ze=73.245 Az status=0008 Ze status=0009 02:29:53 Check angles 02:29:53 SkyScan query 02:29:54 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 02:29:54 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 02:29:54 Check angles 02:29:54 SkyScan query 02:29:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:29:55 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:29:55 Message to Master queued w/err=0: serial=50207 error=0 02:30:00 Received message from Master: op=Filter serial=50208 02:30:00 Color wheel filter change from 0 to 0 02:30:00 FLIGetFilterPos err=0 currentPosition=0 02:30:00 FLIGetStepsRemaining err=0 RemainingSteps=0 02:30:00 Filter is already there-color wheel unchanged 02:30:00 Received message from Master: op=Shutter serial=50209 02:30:00 Shutter LASER close 02:30:00 Received message from Camera: op=State serial=50211 02:30:00 GetSingleValue result=40 Value=cccccccc 02:30:00 SkyScan query 02:30:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:30:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:30:01 Parameters OK 02:30:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:30:01 Set A/D data flow result=40 02:30:01 Set A/D channel type result=40 02:30:01 Set A/D encoding result=40 02:30:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:30:01 Set channel filter=0.000000e+000 result=40 02:30:01 Config A/D Result=40 02:30:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:30:01 Get A/D filter: -9.255963e+061 result=40 02:30:01 Get A/D value=-858993460 result=40 02:30:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:30:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:30:01 Parameters OK 02:30:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:30:01 Set A/D data flow result=40 02:30:01 Set A/D channel type result=40 02:30:01 Set A/D encoding result=40 02:30:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:30:01 Set channel filter=0.000000e+000 result=40 02:30:01 Config A/D Result=40 02:30:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:30:01 Get A/D filter: -9.255963e+061 result=40 02:30:01 Get A/D value=-858993460 result=40 02:30:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:30:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:30:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:30:01 Aux= 02:30:01 Message to Camera, serial 50211 queued 02:30:38 Received message from Master: op=PointingHead serial=50224 02:30:38 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 02:30:38 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 02:30:38 Point started: ret=0 02:30:38 point_skyscan result=0 02:30:39 Check angles 02:30:39 SkyScan query 02:30:39 SkyScan query done: ret=0 az=64.41<-4294 ze=66.555<-7563 Statuses=0009 0008 02:30:39 Msec=0 True Az=64.41 Ze=66.555 Az status=0009 Ze status=0008 02:30:39 Check angles 02:30:39 SkyScan query 02:30:40 SkyScan query done: ret=0 az=82.05<-5470 ze=66.495<-7567 Statuses=0009 0008 02:30:40 Msec=750 True Az=82.05 Ze=66.495 Az status=0009 Ze status=0008 02:30:40 Check angles 02:30:40 SkyScan query 02:30:41 SkyScan query done: ret=0 az=99.69<-6646 ze=66.495<-7567 Statuses=0009 0008 02:30:41 Msec=1500 True Az=99.69 Ze=66.495 Az status=0009 Ze status=0008 02:30:41 Check angles 02:30:41 SkyScan query 02:30:41 SkyScan query done: ret=0 az=117.18<-7812 ze=66.495<-7567 Statuses=0009 0008 02:30:41 Msec=2250 True Az=117.18 Ze=66.495 Az status=0009 Ze status=0008 02:30:42 Check angles 02:30:42 SkyScan query 02:30:42 SkyScan query done: ret=0 az=134.58<-8972 ze=66.495<-7567 Statuses=0009 0008 02:30:42 Msec=3000 True Az=134.58 Ze=66.495 Az status=0009 Ze status=0008 02:30:42 Check angles 02:30:42 SkyScan query 02:30:43 SkyScan query done: ret=0 az=152.49<-10166 ze=66.495<-7567 Statuses=0009 0008 02:30:43 Msec=3750 True Az=152.49 Ze=66.495 Az status=0009 Ze status=0008 02:30:43 Check angles 02:30:43 SkyScan query 02:30:44 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 02:30:44 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 02:30:44 Message to Master queued w/err=0: serial=50224 error=0 02:30:49 Received message from Master: op=Filter serial=50225 02:30:49 Color wheel filter change from 0 to 0 02:30:49 FLIGetFilterPos err=0 currentPosition=0 02:30:49 FLIGetStepsRemaining err=0 RemainingSteps=0 02:30:49 Filter is already there-color wheel unchanged 02:30:49 Received message from Master: op=Shutter serial=50226 02:30:49 Shutter LASER close 02:30:49 Received message from Camera: op=State serial=50228 02:30:49 GetSingleValue result=40 Value=cccccccc 02:30:49 SkyScan query 02:30:50 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:30:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:30:50 Parameters OK 02:30:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:30:50 Set A/D data flow result=40 02:30:50 Set A/D channel type result=40 02:30:50 Set A/D encoding result=40 02:30:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:30:50 Set channel filter=0.000000e+000 result=40 02:30:50 Config A/D Result=40 02:30:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:30:50 Get A/D filter: -9.255963e+061 result=40 02:30:50 Get A/D value=-858993460 result=40 02:30:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:30:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:30:50 Parameters OK 02:30:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:30:50 Set A/D data flow result=40 02:30:50 Set A/D channel type result=40 02:30:50 Set A/D encoding result=40 02:30:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:30:50 Set channel filter=0.000000e+000 result=40 02:30:50 Config A/D Result=40 02:30:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:30:50 Get A/D filter: -9.255963e+061 result=40 02:30:50 Get A/D value=-858993460 result=40 02:30:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:30:50 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:30:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:30:50 Aux= 02:30:50 Message to Camera, serial 50228 queued 02:31:26 Received message from Master: op=PointingHead serial=50241 02:31:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:31:26 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:31:27 Point started: ret=0 02:31:27 point_skyscan result=0 02:31:27 Check angles 02:31:27 SkyScan query 02:31:28 SkyScan query done: ret=0 az=134.535<-8969 ze=36.195<-9587 Statuses=0009 0009 02:31:28 Msec=0 True Az=134.535 Ze=36.195 Az status=0009 Ze status=0009 02:31:28 Check angles 02:31:28 SkyScan query 02:31:29 SkyScan query done: ret=0 az=117.075<-7805 ze=15.285<-10981 Statuses=0009 0009 02:31:29 Msec=750 True Az=117.075 Ze=15.285 Az status=0009 Ze status=0009 02:31:29 Check angles 02:31:29 SkyScan query 02:31:30 SkyScan query done: ret=0 az=99.27<-6618 ze=-6.15<-12410 Statuses=0009 0009 02:31:30 Msec=1500 True Az=99.27 Ze=-6.15 Az status=0009 Ze status=0009 02:31:30 Check angles 02:31:30 SkyScan query 02:31:30 SkyScan query done: ret=0 az=81.78<-5452 ze=-27.105<-13807 Statuses=0009 0009 02:31:30 Msec=2250 True Az=81.78 Ze=-27.105 Az status=0009 Ze status=0009 02:31:31 Check angles 02:31:31 SkyScan query 02:31:31 SkyScan query done: ret=0 az=64.32<-4288 ze=-38.565<-14571 Statuses=0009 0008 02:31:31 Msec=3000 True Az=64.32 Ze=-38.565 Az status=0009 Ze status=0008 02:31:31 Check angles 02:31:31 SkyScan query 02:31:32 SkyScan query done: ret=0 az=46.545<-3103 ze=-38.535<-14569 Statuses=0009 0008 02:31:32 Msec=3750 True Az=46.545 Ze=-38.535 Az status=0009 Ze status=0008 02:31:32 Check angles 02:31:32 SkyScan query 02:31:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:31:33 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 02:31:33 Message to Master queued w/err=0: serial=50241 error=0 02:31:38 Received message from Master: op=Filter serial=50242 02:31:38 Color wheel filter change from 0 to 0 02:31:38 FLIGetFilterPos err=0 currentPosition=0 02:31:38 FLIGetStepsRemaining err=0 RemainingSteps=0 02:31:38 Filter is already there-color wheel unchanged 02:31:38 Received message from Master: op=Shutter serial=50243 02:31:38 Shutter LASER close 02:31:38 Received message from Camera: op=State serial=50245 02:31:38 GetSingleValue result=40 Value=cccccccc 02:31:38 SkyScan query 02:31:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:31:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:31:38 Parameters OK 02:31:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:31:38 Set A/D data flow result=40 02:31:38 Set A/D channel type result=40 02:31:38 Set A/D encoding result=40 02:31:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:31:38 Set channel filter=0.000000e+000 result=40 02:31:38 Config A/D Result=40 02:31:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:31:38 Get A/D filter: -9.255963e+061 result=40 02:31:38 Get A/D value=-858993460 result=40 02:31:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:31:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:31:38 Parameters OK 02:31:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:31:38 Set A/D data flow result=40 02:31:38 Set A/D channel type result=40 02:31:38 Set A/D encoding result=40 02:31:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:31:38 Set channel filter=0.000000e+000 result=40 02:31:38 Config A/D Result=40 02:31:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:31:38 Get A/D filter: -9.255963e+061 result=40 02:31:38 Get A/D value=-858993460 result=40 02:31:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:31:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:31:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:31:38 Aux= 02:31:38 Message to Camera, serial 50245 queued 02:32:15 Received message from Master: op=PointingHead serial=50258 02:32:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:32:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:32:16 Point started: ret=0 02:32:16 point_skyscan result=0 02:32:16 Check angles 02:32:16 SkyScan query 02:32:17 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.175<-16545 Statuses=0009 0009 02:32:17 Msec=0 True Az=63.99 Ze=-68.175 Az status=0009 Ze status=0009 02:32:17 Check angles 02:32:17 SkyScan query 02:32:18 SkyScan query done: ret=0 az=81.27<-5418 ze=-89.175<-17945 Statuses=0009 0009 02:32:18 Msec=750 True Az=81.27 Ze=-89.175 Az status=0009 Ze status=0009 02:32:18 Check angles 02:32:18 SkyScan query 02:32:18 SkyScan query done: ret=0 az=98.865<-6591 ze=-110.115<-19341 Statuses=0009 0009 02:32:18 Msec=1500 True Az=98.865 Ze=-110.115 Az status=0009 Ze status=0009 02:32:19 Check angles 02:32:19 SkyScan query 02:32:19 SkyScan query done: ret=0 az=116.43<-7762 ze=-131.085<-20739 Statuses=0009 0009 02:32:19 Msec=2250 True Az=116.43 Ze=-131.085 Az status=0009 Ze status=0009 02:32:19 Check angles 02:32:19 SkyScan query 02:32:20 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 02:32:20 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 02:32:20 Check angles 02:32:20 SkyScan query 02:32:21 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:32:21 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:32:21 Message to Master queued w/err=0: serial=50258 error=0 02:32:26 Received message from Master: op=Filter serial=50259 02:32:26 Color wheel filter change from 0 to 0 02:32:26 FLIGetFilterPos err=0 currentPosition=0 02:32:26 FLIGetStepsRemaining err=0 RemainingSteps=0 02:32:26 Filter is already there-color wheel unchanged 02:32:26 Received message from Master: op=Shutter serial=50260 02:32:26 Shutter LASER close 02:32:26 Received message from Camera: op=State serial=50262 02:32:26 GetSingleValue result=40 Value=cccccccc 02:32:26 SkyScan query 02:32:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:32:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:32:26 Parameters OK 02:32:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:32:26 Set A/D data flow result=40 02:32:26 Set A/D channel type result=40 02:32:26 Set A/D encoding result=40 02:32:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:32:26 Set channel filter=0.000000e+000 result=40 02:32:26 Config A/D Result=40 02:32:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:32:26 Get A/D filter: -9.255963e+061 result=40 02:32:26 Get A/D value=-858993460 result=40 02:32:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:32:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:32:26 Parameters OK 02:32:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:32:26 Set A/D data flow result=40 02:32:26 Set A/D channel type result=40 02:32:26 Set A/D encoding result=40 02:32:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:32:26 Set channel filter=0.000000e+000 result=40 02:32:26 Config A/D Result=40 02:32:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:32:26 Get A/D filter: -9.255963e+061 result=40 02:32:26 Get A/D value=-858993460 result=40 02:32:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:32:26 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:32:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:32:26 Aux= 02:32:26 Message to Camera, serial 50262 queued 02:33:03 Received message from Master: op=PointingHead serial=50275 02:33:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:33:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:33:04 Point started: ret=0 02:33:04 point_skyscan result=0 02:33:04 Check angles 02:33:04 SkyScan query 02:33:05 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 02:33:05 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 02:33:05 Check angles 02:33:05 SkyScan query 02:33:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:33:06 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:33:06 Message to Master queued w/err=0: serial=50275 error=0 02:33:11 Received message from Master: op=Filter serial=50276 02:33:11 Color wheel filter change from 0 to 0 02:33:11 FLIGetFilterPos err=0 currentPosition=0 02:33:11 FLIGetStepsRemaining err=0 RemainingSteps=0 02:33:11 Filter is already there-color wheel unchanged 02:33:11 Received message from Master: op=Shutter serial=50277 02:33:11 Shutter LASER open 02:33:11 Received message from Camera: op=State serial=50279 02:33:11 GetSingleValue result=40 Value=cccccccc 02:33:11 SkyScan query 02:33:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:33:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:33:12 Parameters OK 02:33:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:33:12 Set A/D data flow result=40 02:33:12 Set A/D channel type result=40 02:33:12 Set A/D encoding result=40 02:33:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:33:12 Set channel filter=0.000000e+000 result=40 02:33:12 Config A/D Result=40 02:33:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:33:12 Get A/D filter: -9.255963e+061 result=40 02:33:12 Get A/D value=-858993460 result=40 02:33:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:33:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:33:12 Parameters OK 02:33:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:33:12 Set A/D data flow result=40 02:33:12 Set A/D channel type result=40 02:33:12 Set A/D encoding result=40 02:33:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:33:12 Set channel filter=0.000000e+000 result=40 02:33:12 Config A/D Result=40 02:33:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:33:12 Get A/D filter: -9.255963e+061 result=40 02:33:12 Get A/D value=-858993460 result=40 02:33:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:33:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:33:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:33:12 Aux= 02:33:12 Message to Camera, serial 50279 queued 02:33:20 Received message from Master: op=Shutter serial=50289 02:33:20 Shutter LASER close 02:33:21 Received message from Master: op=PointingHead serial=50293 02:33:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:33:21 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:33:21 Point started: ret=0 02:33:21 point_skyscan result=0 02:33:22 Check angles 02:33:22 SkyScan query 02:33:22 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.725<-21515 Statuses=0009 0009 02:33:22 Msec=0 True Az=136.38 Ze=-142.725 Az status=0009 Ze status=0009 02:33:23 Check angles 02:33:23 SkyScan query 02:33:23 SkyScan query done: ret=0 az=153.885<-10259 ze=-121.755<-20117 Statuses=0009 0009 02:33:23 Msec=750 True Az=153.885 Ze=-121.755 Az status=0009 Ze status=0009 02:33:23 Check angles 02:33:23 SkyScan query 02:33:24 SkyScan query done: ret=0 az=171.435<-11429 ze=-100.8<-18720 Statuses=0009 0009 02:33:24 Msec=1500 True Az=171.435 Ze=-100.8 Az status=0009 Ze status=0009 02:33:24 Check angles 02:33:24 SkyScan query 02:33:25 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.89<-17326 Statuses=0008 0009 02:33:25 Msec=2250 True Az=176.025 Ze=-79.89 Az status=0008 Ze status=0009 02:33:25 Check angles 02:33:25 SkyScan query 02:33:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.89<-15926 Statuses=0008 0009 02:33:25 Msec=3000 True Az=175.995 Ze=-58.89 Az status=0008 Ze status=0009 02:33:26 Check angles 02:33:26 SkyScan query 02:33:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:33:26 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:33:26 Message to Master queued w/err=0: serial=50293 error=0 02:33:31 Received message from Master: op=Filter serial=50294 02:33:31 Color wheel filter change from 0 to 0 02:33:31 FLIGetFilterPos err=0 currentPosition=0 02:33:31 FLIGetStepsRemaining err=0 RemainingSteps=0 02:33:31 Filter is already there-color wheel unchanged 02:33:31 Received message from Master: op=Shutter serial=50295 02:33:31 Shutter LASER close 02:33:32 Received message from Camera: op=State serial=50297 02:33:32 GetSingleValue result=40 Value=cccccccc 02:33:32 SkyScan query 02:33:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:33:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:33:32 Parameters OK 02:33:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:33:32 Set A/D data flow result=40 02:33:32 Set A/D channel type result=40 02:33:32 Set A/D encoding result=40 02:33:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:33:32 Set channel filter=0.000000e+000 result=40 02:33:32 Config A/D Result=40 02:33:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:33:32 Get A/D filter: -9.255963e+061 result=40 02:33:32 Get A/D value=-858993460 result=40 02:33:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:33:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:33:32 Parameters OK 02:33:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:33:32 Set A/D data flow result=40 02:33:32 Set A/D channel type result=40 02:33:32 Set A/D encoding result=40 02:33:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:33:32 Set channel filter=0.000000e+000 result=40 02:33:32 Config A/D Result=40 02:33:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:33:32 Get A/D filter: -9.255963e+061 result=40 02:33:32 Get A/D value=-858993460 result=40 02:33:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:33:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:33:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:33:32 Aux= 02:33:32 Message to Camera, serial 50297 queued 02:34:09 Received message from Master: op=PointingHead serial=50310 02:34:09 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:34:09 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:34:09 Point started: ret=0 02:34:09 point_skyscan result=0 02:34:10 Check angles 02:34:10 SkyScan query 02:34:11 SkyScan query done: ret=0 az=152.355<-10157 ze=-21.42<-13428 Statuses=0009 0009 02:34:11 Msec=0 True Az=152.355 Ze=-21.42 Az status=0009 Ze status=0009 02:34:11 Check angles 02:34:11 SkyScan query 02:34:11 SkyScan query done: ret=0 az=134.34<-8956 ze=-0.03<-12002 Statuses=0009 0009 02:34:11 Msec=750 True Az=134.34 Ze=-0.03 Az status=0009 Ze status=0009 02:34:12 Check angles 02:34:12 SkyScan query 02:34:12 SkyScan query done: ret=0 az=116.865<-7791 ze=20.94<-10604 Statuses=0009 0009 02:34:12 Msec=1500 True Az=116.865 Ze=20.94 Az status=0009 Ze status=0009 02:34:12 Check angles 02:34:12 SkyScan query 02:34:13 SkyScan query done: ret=0 az=99.255<-6617 ze=42.33<-9178 Statuses=0009 0009 02:34:13 Msec=2250 True Az=99.255 Ze=42.33 Az status=0009 Ze status=0009 02:34:13 Check angles 02:34:13 SkyScan query 02:34:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 02:34:14 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 02:34:14 Check angles 02:34:14 SkyScan query 02:34:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:34:14 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:34:14 Message to Master queued w/err=0: serial=50310 error=0 02:34:19 Received message from Master: op=Filter serial=50311 02:34:19 Color wheel filter change from 0 to 0 02:34:19 FLIGetFilterPos err=0 currentPosition=0 02:34:19 FLIGetStepsRemaining err=0 RemainingSteps=0 02:34:19 Filter is already there-color wheel unchanged 02:34:20 Received message from Master: op=Shutter serial=50312 02:34:20 Shutter LASER close 02:34:20 Received message from Camera: op=State serial=50314 02:34:20 GetSingleValue result=40 Value=cccccccc 02:34:20 SkyScan query 02:34:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:34:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:34:20 Parameters OK 02:34:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:34:20 Set A/D data flow result=40 02:34:20 Set A/D channel type result=40 02:34:20 Set A/D encoding result=40 02:34:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:34:20 Set channel filter=0.000000e+000 result=40 02:34:20 Config A/D Result=40 02:34:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:34:20 Get A/D filter: -9.255963e+061 result=40 02:34:20 Get A/D value=-858993460 result=40 02:34:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:34:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:34:20 Parameters OK 02:34:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:34:20 Set A/D data flow result=40 02:34:20 Set A/D channel type result=40 02:34:20 Set A/D encoding result=40 02:34:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:34:20 Set channel filter=0.000000e+000 result=40 02:34:20 Config A/D Result=40 02:34:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:34:20 Get A/D filter: -9.255963e+061 result=40 02:34:20 Get A/D value=-858993460 result=40 02:34:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:34:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:34:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:34:20 Aux= 02:34:20 Message to Camera, serial 50314 queued 02:34:57 Received message from Master: op=PointingHead serial=50327 02:34:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:34:57 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:34:57 Point started: ret=0 02:34:57 point_skyscan result=0 02:34:58 Check angles 02:34:58 SkyScan query 02:34:59 SkyScan query done: ret=0 az=109.02<-7268 ze=38.49<-9434 Statuses=0009 0008 02:34:59 Msec=0 True Az=109.02 Ze=38.49 Az status=0009 Ze status=0008 02:34:59 Check angles 02:34:59 SkyScan query 02:35:00 SkyScan query done: ret=0 az=126.495<-8433 ze=38.505<-9433 Statuses=0009 0008 02:35:00 Msec=750 True Az=126.495 Ze=38.505 Az status=0009 Ze status=0008 02:35:00 Check angles 02:35:00 SkyScan query 02:35:00 SkyScan query done: ret=0 az=143.865<-9591 ze=38.505<-9433 Statuses=0009 0008 02:35:00 Msec=1500 True Az=143.865 Ze=38.505 Az status=0009 Ze status=0008 02:35:00 Check angles 02:35:00 SkyScan query 02:35:01 SkyScan query done: ret=0 az=161.19<-10746 ze=38.505<-9433 Statuses=0009 0008 02:35:01 Msec=2250 True Az=161.19 Ze=38.505 Az status=0009 Ze status=0008 02:35:01 Check angles 02:35:01 SkyScan query 02:35:02 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 02:35:02 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 02:35:02 Check angles 02:35:02 SkyScan query 02:35:03 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 02:35:03 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 02:35:03 Message to Master queued w/err=0: serial=50327 error=0 02:35:08 Received message from Master: op=Filter serial=50328 02:35:08 Color wheel filter change from 0 to 0 02:35:08 FLIGetFilterPos err=0 currentPosition=0 02:35:08 FLIGetStepsRemaining err=0 RemainingSteps=0 02:35:08 Filter is already there-color wheel unchanged 02:35:08 Received message from Master: op=Shutter serial=50329 02:35:08 Shutter LASER close 02:35:08 Received message from Camera: op=State serial=50331 02:35:08 GetSingleValue result=40 Value=cccccccc 02:35:08 SkyScan query 02:35:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:35:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:35:08 Parameters OK 02:35:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:35:08 Set A/D data flow result=40 02:35:08 Set A/D channel type result=40 02:35:08 Set A/D encoding result=40 02:35:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:35:08 Set channel filter=0.000000e+000 result=40 02:35:08 Config A/D Result=40 02:35:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:35:08 Get A/D filter: -9.255963e+061 result=40 02:35:08 Get A/D value=-858993460 result=40 02:35:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:35:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:35:08 Parameters OK 02:35:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:35:08 Set A/D data flow result=40 02:35:08 Set A/D channel type result=40 02:35:08 Set A/D encoding result=40 02:35:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:35:08 Set channel filter=0.000000e+000 result=40 02:35:08 Config A/D Result=40 02:35:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:35:08 Get A/D filter: -9.255963e+061 result=40 02:35:08 Get A/D value=-858993460 result=40 02:35:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:35:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:35:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:35:08 Aux= 02:35:08 Message to Camera, serial 50331 queued 02:35:45 Received message from Master: op=PointingHead serial=50344 02:35:45 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:35:45 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:35:45 Point started: ret=0 02:35:45 point_skyscan result=0 02:35:46 Check angles 02:35:46 SkyScan query 02:35:47 SkyScan query done: ret=0 az=152.94<-10196 ze=8.67<-11422 Statuses=0009 0009 02:35:47 Msec=0 True Az=152.94 Ze=8.67 Az status=0009 Ze status=0009 02:35:47 Check angles 02:35:47 SkyScan query 02:35:48 SkyScan query done: ret=0 az=135.48<-9032 ze=-12.315<-12821 Statuses=0009 0009 02:35:48 Msec=750 True Az=135.48 Ze=-12.315 Az status=0009 Ze status=0009 02:35:48 Check angles 02:35:48 SkyScan query 02:35:48 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.21<-14214 Statuses=0009 0009 02:35:48 Msec=1500 True Az=117.78 Ze=-33.21 Az status=0009 Ze status=0009 02:35:48 Check angles 02:35:48 SkyScan query 02:35:49 SkyScan query done: ret=0 az=100.53<-6702 ze=-51.525<-15435 Statuses=0009 0009 02:35:49 Msec=2250 True Az=100.53 Ze=-51.525 Az status=0009 Ze status=0009 02:35:49 Check angles 02:35:49 SkyScan query 02:35:50 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 02:35:50 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 02:35:50 Check angles 02:35:50 SkyScan query 02:35:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:35:51 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:35:51 Message to Master queued w/err=0: serial=50344 error=0 [UTC 2018-12-11 02:35:54] 02:35:56 Received message from Master: op=Filter serial=50345 02:35:56 Color wheel filter change from 0 to 0 02:35:56 FLIGetFilterPos err=0 currentPosition=0 02:35:56 FLIGetStepsRemaining err=0 RemainingSteps=0 02:35:56 Filter is already there-color wheel unchanged 02:35:56 Received message from Master: op=Shutter serial=50346 02:35:56 Shutter LASER close 02:35:56 Received message from Camera: op=State serial=50348 02:35:56 GetSingleValue result=40 Value=cccccccc 02:35:56 SkyScan query 02:35:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:35:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:35:56 Parameters OK 02:35:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:35:56 Set A/D data flow result=40 02:35:56 Set A/D channel type result=40 02:35:56 Set A/D encoding result=40 02:35:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:35:56 Set channel filter=0.000000e+000 result=40 02:35:56 Config A/D Result=40 02:35:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:35:56 Get A/D filter: -9.255963e+061 result=40 02:35:56 Get A/D value=-858993460 result=40 02:35:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:35:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:35:56 Parameters OK 02:35:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:35:56 Set A/D data flow result=40 02:35:56 Set A/D channel type result=40 02:35:56 Set A/D encoding result=40 02:35:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:35:56 Set channel filter=0.000000e+000 result=40 02:35:56 Config A/D Result=40 02:35:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:35:56 Get A/D filter: -9.255963e+061 result=40 02:35:56 Get A/D value=-858993460 result=40 02:35:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:35:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:35:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:35:56 Aux= 02:35:56 Message to Camera, serial 50348 queued 02:36:33 Received message from Master: op=PointingHead serial=50361 02:36:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:36:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:36:34 Point started: ret=0 02:36:34 point_skyscan result=0 02:36:34 Check angles 02:36:34 SkyScan query 02:36:35 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.195<-17413 Statuses=0009 0009 02:36:35 Msec=0 True Az=108.915 Ze=-81.195 Az status=0009 Ze status=0009 02:36:35 Check angles 02:36:35 SkyScan query 02:36:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.165<-18811 Statuses=0008 0009 02:36:36 Msec=750 True Az=112.995 Ze=-102.165 Az status=0008 Ze status=0009 02:36:36 Check angles 02:36:36 SkyScan query 02:36:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.105<-20207 Statuses=0008 0009 02:36:36 Msec=1500 True Az=112.995 Ze=-123.105 Az status=0008 Ze status=0009 02:36:37 Check angles 02:36:37 SkyScan query 02:36:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.09<-21606 Statuses=0008 0009 02:36:37 Msec=2250 True Az=112.995 Ze=-144.09 Az status=0008 Ze status=0009 02:36:37 Check angles 02:36:37 SkyScan query 02:36:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.015<-23001 Statuses=0008 0009 02:36:38 Msec=3000 True Az=112.995 Ze=-165.015 Az status=0008 Ze status=0009 02:36:38 Check angles 02:36:38 SkyScan query 02:36:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:36:39 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:36:39 Message to Master queued w/err=0: serial=50361 error=0 02:36:44 Received message from Master: op=Filter serial=50362 02:36:44 Color wheel filter change from 0 to 0 02:36:44 FLIGetFilterPos err=0 currentPosition=0 02:36:44 FLIGetStepsRemaining err=0 RemainingSteps=0 02:36:44 Filter is already there-color wheel unchanged 02:36:44 Received message from Master: op=Shutter serial=50363 02:36:44 Shutter LASER open 02:36:44 Received message from Camera: op=State serial=50365 02:36:44 GetSingleValue result=40 Value=cccccccc 02:36:44 SkyScan query 02:36:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:36:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:36:45 Parameters OK 02:36:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:36:45 Set A/D data flow result=40 02:36:45 Set A/D channel type result=40 02:36:45 Set A/D encoding result=40 02:36:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:36:45 Set channel filter=0.000000e+000 result=40 02:36:45 Config A/D Result=40 02:36:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:36:45 Get A/D filter: -9.255963e+061 result=40 02:36:45 Get A/D value=-858993460 result=40 02:36:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:36:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:36:45 Parameters OK 02:36:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:36:45 Set A/D data flow result=40 02:36:45 Set A/D channel type result=40 02:36:45 Set A/D encoding result=40 02:36:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:36:45 Set channel filter=0.000000e+000 result=40 02:36:45 Config A/D Result=40 02:36:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:36:45 Get A/D filter: -9.255963e+061 result=40 02:36:45 Get A/D value=-858993460 result=40 02:36:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:36:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:36:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:36:45 Aux= 02:36:45 Message to Camera, serial 50365 queued 02:36:53 Received message from Master: op=Shutter serial=50375 02:36:53 Shutter LASER close 02:36:53 Received message from Master: op=PointingHead serial=50379 02:36:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:36:53 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:36:54 Point started: ret=0 02:36:54 point_skyscan result=0 02:36:55 Check angles 02:36:55 SkyScan query 02:36:55 SkyScan query done: ret=0 az=90.12<-6008 ze=157.53<-1498 Statuses=0009 0009 02:36:55 Msec=0 True Az=90.12 Ze=157.53 Az status=0009 Ze status=0009 02:36:55 Check angles 02:36:55 SkyScan query 02:36:56 SkyScan query done: ret=0 az=72.21<-4814 ze=136.125<-2925 Statuses=0009 0009 02:36:56 Msec=750 True Az=72.21 Ze=136.125 Az status=0009 Ze status=0009 02:36:56 Check angles 02:36:56 SkyScan query 02:36:57 SkyScan query done: ret=0 az=54.945<-3663 ze=115.185<-4321 Statuses=0009 0009 02:36:57 Msec=1500 True Az=54.945 Ze=115.185 Az status=0009 Ze status=0009 02:36:57 Check angles 02:36:57 SkyScan query 02:36:57 SkyScan query done: ret=0 az=40.875<-2725 ze=94.2<-5720 Statuses=0009 0009 02:36:57 Msec=2250 True Az=40.875 Ze=94.2 Az status=0009 Ze status=0009 02:36:58 Check angles 02:36:58 SkyScan query 02:36:58 SkyScan query done: ret=0 az=40.995<-2733 ze=73.26<-7116 Statuses=0008 0009 02:36:58 Msec=3000 True Az=40.995 Ze=73.26 Az status=0008 Ze status=0009 02:36:58 Check angles 02:36:58 SkyScan query 02:36:59 SkyScan query done: ret=0 az=40.995<-2733 ze=52.755<-8483 Statuses=0008 0009 02:36:59 Msec=3750 True Az=40.995 Ze=52.755 Az status=0008 Ze status=0009 02:36:59 Check angles 02:36:59 SkyScan query 02:37:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:37:00 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:37:00 Message to Master queued w/err=0: serial=50379 error=0 02:37:05 Received message from Master: op=Filter serial=50380 02:37:05 Color wheel filter change from 0 to 0 02:37:05 FLIGetFilterPos err=0 currentPosition=0 02:37:05 FLIGetStepsRemaining err=0 RemainingSteps=0 02:37:05 Filter is already there-color wheel unchanged 02:37:05 Received message from Master: op=Shutter serial=50381 02:37:05 Shutter LASER close 02:37:05 Received message from Camera: op=State serial=50383 02:37:05 GetSingleValue result=40 Value=cccccccc 02:37:05 SkyScan query 02:37:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:37:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:37:06 Parameters OK 02:37:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:37:06 Set A/D data flow result=40 02:37:06 Set A/D channel type result=40 02:37:06 Set A/D encoding result=40 02:37:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:37:06 Set channel filter=0.000000e+000 result=40 02:37:06 Config A/D Result=40 02:37:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:37:06 Get A/D filter: -9.255963e+061 result=40 02:37:06 Get A/D value=-858993460 result=40 02:37:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:37:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:37:06 Parameters OK 02:37:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:37:06 Set A/D data flow result=40 02:37:06 Set A/D channel type result=40 02:37:06 Set A/D encoding result=40 02:37:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:37:06 Set channel filter=0.000000e+000 result=40 02:37:06 Config A/D Result=40 02:37:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:37:06 Get A/D filter: -9.255963e+061 result=40 02:37:06 Get A/D value=-858993460 result=40 02:37:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:37:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:37:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:37:06 Aux= 02:37:06 Message to Camera, serial 50383 queued 02:37:42 Received message from Master: op=PointingHead serial=50395 02:37:42 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 02:37:42 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 02:37:42 Point started: ret=0 02:37:42 point_skyscan result=0 02:37:43 Check angles 02:37:43 SkyScan query 02:37:43 SkyScan query done: ret=0 az=63.825<-4255 ze=66.555<-7563 Statuses=0009 0008 02:37:43 Msec=0 True Az=63.825 Ze=66.555 Az status=0009 Ze status=0008 02:37:43 Check angles 02:37:43 SkyScan query 02:37:44 SkyScan query done: ret=0 az=81.24<-5416 ze=66.51<-7566 Statuses=0009 0008 02:37:44 Msec=750 True Az=81.24 Ze=66.51 Az status=0009 Ze status=0008 02:37:44 Check angles 02:37:44 SkyScan query 02:37:45 SkyScan query done: ret=0 az=99.225<-6615 ze=66.495<-7567 Statuses=0009 0008 02:37:45 Msec=1500 True Az=99.225 Ze=66.495 Az status=0009 Ze status=0008 02:37:45 Check angles 02:37:45 SkyScan query 02:37:45 SkyScan query done: ret=0 az=116.76<-7784 ze=66.495<-7567 Statuses=0009 0008 02:37:45 Msec=2250 True Az=116.76 Ze=66.495 Az status=0009 Ze status=0008 02:37:46 Check angles 02:37:46 SkyScan query 02:37:46 SkyScan query done: ret=0 az=134.58<-8972 ze=66.495<-7567 Statuses=0009 0008 02:37:46 Msec=3000 True Az=134.58 Ze=66.495 Az status=0009 Ze status=0008 02:37:46 Check angles 02:37:46 SkyScan query 02:37:47 SkyScan query done: ret=0 az=152.1<-10140 ze=66.495<-7567 Statuses=0009 0008 02:37:47 Msec=3750 True Az=152.1 Ze=66.495 Az status=0009 Ze status=0008 02:37:47 Check angles 02:37:47 SkyScan query 02:37:48 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:37:48 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 02:37:48 Message to Master queued w/err=0: serial=50395 error=0 02:37:53 Received message from Master: op=Filter serial=50396 02:37:53 Color wheel filter change from 0 to 0 02:37:53 FLIGetFilterPos err=0 currentPosition=0 02:37:53 FLIGetStepsRemaining err=0 RemainingSteps=0 02:37:53 Filter is already there-color wheel unchanged 02:37:53 Received message from Master: op=Shutter serial=50397 02:37:53 Shutter LASER close 02:37:53 Received message from Camera: op=State serial=50399 02:37:53 GetSingleValue result=40 Value=cccccccc 02:37:53 SkyScan query 02:37:54 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:37:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:37:54 Parameters OK 02:37:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:37:54 Set A/D data flow result=40 02:37:54 Set A/D channel type result=40 02:37:54 Set A/D encoding result=40 02:37:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:37:54 Set channel filter=0.000000e+000 result=40 02:37:54 Config A/D Result=40 02:37:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:37:54 Get A/D filter: -9.255963e+061 result=40 02:37:54 Get A/D value=-858993460 result=40 02:37:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:37:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:37:54 Parameters OK 02:37:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:37:54 Set A/D data flow result=40 02:37:54 Set A/D channel type result=40 02:37:54 Set A/D encoding result=40 02:37:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:37:54 Set channel filter=0.000000e+000 result=40 02:37:54 Config A/D Result=40 02:37:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:37:54 Get A/D filter: -9.255963e+061 result=40 02:37:54 Get A/D value=-858993460 result=40 02:37:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:37:54 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:37:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:37:54 Aux= 02:37:54 Message to Camera, serial 50399 queued 02:38:30 Received message from Master: op=PointingHead serial=50412 02:38:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:38:30 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:38:31 Point started: ret=0 02:38:31 point_skyscan result=0 02:38:31 Check angles 02:38:31 SkyScan query 02:38:32 SkyScan query done: ret=0 az=135.105<-9007 ze=36.855<-9543 Statuses=0009 0009 02:38:32 Msec=0 True Az=135.105 Ze=36.855 Az status=0009 Ze status=0009 02:38:32 Check angles 02:38:32 SkyScan query 02:38:33 SkyScan query done: ret=0 az=117.255<-7817 ze=15.54<-10964 Statuses=0009 0009 02:38:33 Msec=750 True Az=117.255 Ze=15.54 Az status=0009 Ze status=0009 02:38:33 Check angles 02:38:33 SkyScan query 02:38:34 SkyScan query done: ret=0 az=99.84<-6656 ze=-5.46<-12364 Statuses=0009 0009 02:38:34 Msec=1500 True Az=99.84 Ze=-5.46 Az status=0009 Ze status=0009 02:38:34 Check angles 02:38:34 SkyScan query 02:38:34 SkyScan query done: ret=0 az=82.425<-5495 ze=-26.4<-13760 Statuses=0009 0009 02:38:34 Msec=2250 True Az=82.425 Ze=-26.4 Az status=0009 Ze status=0009 02:38:34 Check angles 02:38:34 SkyScan query 02:38:35 SkyScan query done: ret=0 az=64.8<-4320 ze=-38.58<-14572 Statuses=0009 0008 02:38:35 Msec=3000 True Az=64.8 Ze=-38.58 Az status=0009 Ze status=0008 02:38:35 Check angles 02:38:35 SkyScan query 02:38:36 SkyScan query done: ret=0 az=47.46<-3164 ze=-38.52<-14568 Statuses=0009 0008 02:38:36 Msec=3750 True Az=47.46 Ze=-38.52 Az status=0009 Ze status=0008 02:38:36 Check angles 02:38:36 SkyScan query 02:38:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:38:37 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 02:38:37 Message to Master queued w/err=0: serial=50412 error=0 02:38:42 Received message from Master: op=Filter serial=50413 02:38:42 Color wheel filter change from 0 to 0 02:38:42 FLIGetFilterPos err=0 currentPosition=0 02:38:42 FLIGetStepsRemaining err=0 RemainingSteps=0 02:38:42 Filter is already there-color wheel unchanged 02:38:42 Received message from Master: op=Shutter serial=50414 02:38:42 Shutter LASER close 02:38:42 Received message from Camera: op=State serial=50416 02:38:42 GetSingleValue result=40 Value=cccccccc 02:38:42 SkyScan query 02:38:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:38:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:38:42 Parameters OK 02:38:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:38:42 Set A/D data flow result=40 02:38:42 Set A/D channel type result=40 02:38:42 Set A/D encoding result=40 02:38:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:38:42 Set channel filter=0.000000e+000 result=40 02:38:42 Config A/D Result=40 02:38:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:38:42 Get A/D filter: -9.255963e+061 result=40 02:38:42 Get A/D value=-858993460 result=40 02:38:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:38:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:38:42 Parameters OK 02:38:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:38:42 Set A/D data flow result=40 02:38:42 Set A/D channel type result=40 02:38:42 Set A/D encoding result=40 02:38:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:38:42 Set channel filter=0.000000e+000 result=40 02:38:42 Config A/D Result=40 02:38:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:38:42 Get A/D filter: -9.255963e+061 result=40 02:38:42 Get A/D value=-858993460 result=40 02:38:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:38:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:38:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:38:42 Aux= 02:38:42 Message to Camera, serial 50416 queued 02:39:19 Received message from Master: op=PointingHead serial=50429 02:39:19 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:39:19 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:39:20 Point started: ret=0 02:39:20 point_skyscan result=0 02:39:20 Check angles 02:39:20 SkyScan query 02:39:21 SkyScan query done: ret=0 az=63.915<-4261 ze=-68.22<-16548 Statuses=0009 0009 02:39:21 Msec=0 True Az=63.915 Ze=-68.22 Az status=0009 Ze status=0009 02:39:21 Check angles 02:39:21 SkyScan query 02:39:22 SkyScan query done: ret=0 az=81.735<-5449 ze=-89.67<-17978 Statuses=0009 0009 02:39:22 Msec=750 True Az=81.735 Ze=-89.67 Az status=0009 Ze status=0009 02:39:22 Check angles 02:39:22 SkyScan query 02:39:22 SkyScan query done: ret=0 az=99.675<-6645 ze=-111.03<-19402 Statuses=0009 0009 02:39:22 Msec=1500 True Az=99.675 Ze=-111.03 Az status=0009 Ze status=0009 02:39:23 Check angles 02:39:23 SkyScan query 02:39:23 SkyScan query done: ret=0 az=117.21<-7814 ze=-131.955<-20797 Statuses=0009 0009 02:39:23 Msec=2250 True Az=117.21 Ze=-131.955 Az status=0009 Ze status=0009 02:39:23 Check angles 02:39:23 SkyScan query 02:39:24 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 02:39:24 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 02:39:24 Check angles 02:39:24 SkyScan query 02:39:25 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:39:25 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:39:25 Message to Master queued w/err=0: serial=50429 error=0 02:39:30 Received message from Master: op=Filter serial=50430 02:39:30 Color wheel filter change from 0 to 0 02:39:30 FLIGetFilterPos err=0 currentPosition=0 02:39:30 FLIGetStepsRemaining err=0 RemainingSteps=0 02:39:30 Filter is already there-color wheel unchanged 02:39:30 Received message from Master: op=Shutter serial=50431 02:39:30 Shutter LASER close 02:39:30 Received message from Camera: op=State serial=50433 02:39:30 GetSingleValue result=40 Value=cccccccc 02:39:30 SkyScan query 02:39:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:39:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:39:30 Parameters OK 02:39:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:39:30 Set A/D data flow result=40 02:39:30 Set A/D channel type result=40 02:39:30 Set A/D encoding result=40 02:39:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:39:30 Set channel filter=0.000000e+000 result=40 02:39:30 Config A/D Result=40 02:39:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:39:30 Get A/D filter: -9.255963e+061 result=40 02:39:30 Get A/D value=-858993460 result=40 02:39:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:39:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:39:30 Parameters OK 02:39:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:39:30 Set A/D data flow result=40 02:39:30 Set A/D channel type result=40 02:39:30 Set A/D encoding result=40 02:39:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:39:30 Set channel filter=0.000000e+000 result=40 02:39:30 Config A/D Result=40 02:39:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:39:30 Get A/D filter: -9.255963e+061 result=40 02:39:30 Get A/D value=-858993460 result=40 02:39:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:39:30 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:39:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:39:30 Aux= 02:39:30 Message to Camera, serial 50433 queued 02:40:07 Received message from Master: op=PointingHead serial=50446 02:40:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:40:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:40:08 Point started: ret=0 02:40:08 point_skyscan result=0 02:40:08 Check angles 02:40:08 SkyScan query 02:40:09 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.375<-23425 Statuses=0009 0009 02:40:09 Msec=0 True Az=113.01 Ze=-171.375 Az status=0009 Ze status=0009 02:40:09 Check angles 02:40:09 SkyScan query 02:40:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:40:10 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:40:10 Message to Master queued w/err=0: serial=50446 error=0 02:40:15 Received message from Master: op=Filter serial=50447 02:40:15 Color wheel filter change from 0 to 0 02:40:15 FLIGetFilterPos err=0 currentPosition=0 02:40:15 FLIGetStepsRemaining err=0 RemainingSteps=0 02:40:15 Filter is already there-color wheel unchanged 02:40:15 Received message from Master: op=Shutter serial=50448 02:40:15 Shutter LASER open 02:40:15 Received message from Camera: op=State serial=50450 02:40:15 GetSingleValue result=40 Value=cccccccc 02:40:15 SkyScan query 02:40:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:40:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:40:16 Parameters OK 02:40:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:40:16 Set A/D data flow result=40 02:40:16 Set A/D channel type result=40 02:40:16 Set A/D encoding result=40 02:40:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:40:16 Set channel filter=0.000000e+000 result=40 02:40:16 Config A/D Result=40 02:40:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:40:16 Get A/D filter: -9.255963e+061 result=40 02:40:16 Get A/D value=-858993460 result=40 02:40:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:40:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:40:16 Parameters OK 02:40:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:40:16 Set A/D data flow result=40 02:40:16 Set A/D channel type result=40 02:40:16 Set A/D encoding result=40 02:40:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:40:16 Set channel filter=0.000000e+000 result=40 02:40:16 Config A/D Result=40 02:40:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:40:16 Get A/D filter: -9.255963e+061 result=40 02:40:16 Get A/D value=-858993460 result=40 02:40:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:40:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:40:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:40:16 Aux= 02:40:16 Message to Camera, serial 50450 queued 02:40:24 Received message from Master: op=Shutter serial=50460 02:40:24 Shutter LASER close 02:40:25 Received message from Master: op=PointingHead serial=50464 02:40:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:40:25 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:40:25 Point started: ret=0 02:40:25 point_skyscan result=0 02:40:26 Check angles 02:40:26 SkyScan query 02:40:26 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.085<-21539 Statuses=0009 0009 02:40:26 Msec=0 True Az=136.155 Ze=-143.085 Az status=0009 Ze status=0009 02:40:27 Check angles 02:40:27 SkyScan query 02:40:27 SkyScan query done: ret=0 az=154.02<-10268 ze=-121.68<-20112 Statuses=0009 0009 02:40:27 Msec=750 True Az=154.02 Ze=-121.68 Az status=0009 Ze status=0009 02:40:27 Check angles 02:40:27 SkyScan query 02:40:28 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.755<-18717 Statuses=0009 0009 02:40:28 Msec=1500 True Az=171.45 Ze=-100.755 Az status=0009 Ze status=0009 02:40:28 Check angles 02:40:28 SkyScan query 02:40:29 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.845<-17323 Statuses=0008 0009 02:40:29 Msec=2250 True Az=176.025 Ze=-79.845 Az status=0008 Ze status=0009 02:40:29 Check angles 02:40:29 SkyScan query 02:40:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.83<-15922 Statuses=0008 0009 02:40:29 Msec=3000 True Az=175.995 Ze=-58.83 Az status=0008 Ze status=0009 02:40:30 Check angles 02:40:30 SkyScan query 02:40:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 02:40:30 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 02:40:30 Message to Master queued w/err=0: serial=50464 error=0 02:40:35 Received message from Master: op=Filter serial=50465 02:40:35 Color wheel filter change from 0 to 0 02:40:35 FLIGetFilterPos err=0 currentPosition=0 02:40:35 FLIGetStepsRemaining err=0 RemainingSteps=0 02:40:35 Filter is already there-color wheel unchanged 02:40:35 Received message from Master: op=Shutter serial=50466 02:40:35 Shutter LASER close 02:40:35 Received message from Camera: op=State serial=50468 02:40:35 GetSingleValue result=40 Value=cccccccc 02:40:35 SkyScan query 02:40:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:40:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:40:36 Parameters OK 02:40:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:40:36 Set A/D data flow result=40 02:40:36 Set A/D channel type result=40 02:40:36 Set A/D encoding result=40 02:40:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:40:36 Set channel filter=0.000000e+000 result=40 02:40:36 Config A/D Result=40 02:40:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:40:36 Get A/D filter: -9.255963e+061 result=40 02:40:36 Get A/D value=-858993460 result=40 02:40:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:40:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:40:36 Parameters OK 02:40:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:40:36 Set A/D data flow result=40 02:40:36 Set A/D channel type result=40 02:40:36 Set A/D encoding result=40 02:40:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:40:36 Set channel filter=0.000000e+000 result=40 02:40:36 Config A/D Result=40 02:40:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:40:36 Get A/D filter: -9.255963e+061 result=40 02:40:36 Get A/D value=-858993460 result=40 02:40:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:40:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:40:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:40:36 Aux= 02:40:36 Message to Camera, serial 50468 queued 02:41:13 Received message from Master: op=PointingHead serial=50481 02:41:13 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:41:13 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:41:13 Point started: ret=0 02:41:13 point_skyscan result=0 02:41:14 Check angles 02:41:14 SkyScan query 02:41:14 SkyScan query done: ret=0 az=153.135<-10209 ze=-21.975<-13465 Statuses=0009 0009 02:41:14 Msec=0 True Az=153.135 Ze=-21.975 Az status=0009 Ze status=0009 02:41:15 Check angles 02:41:15 SkyScan query 02:41:15 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.555<-12037 Statuses=0009 0009 02:41:15 Msec=750 True Az=135.39 Ze=-0.555 Az status=0009 Ze status=0009 02:41:15 Check angles 02:41:15 SkyScan query 02:41:16 SkyScan query done: ret=0 az=117.78<-7852 ze=20.4<-10640 Statuses=0009 0009 02:41:16 Msec=1500 True Az=117.78 Ze=20.4 Az status=0009 Ze status=0009 02:41:16 Check angles 02:41:16 SkyScan query 02:41:17 SkyScan query done: ret=0 az=100.005<-6667 ze=41.775<-9215 Statuses=0009 0009 02:41:17 Msec=2250 True Az=100.005 Ze=41.775 Az status=0009 Ze status=0009 02:41:17 Check angles 02:41:17 SkyScan query 02:41:18 SkyScan query done: ret=0 az=86.055<-5737 ze=51.57<-8562 Statuses=0009 0008 02:41:18 Msec=3000 True Az=86.055 Ze=51.57 Az status=0009 Ze status=0008 02:41:18 Check angles 02:41:18 SkyScan query 02:41:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:41:18 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:41:18 Message to Master queued w/err=0: serial=50481 error=0 02:41:23 Received message from Master: op=Filter serial=50482 02:41:23 Color wheel filter change from 0 to 0 02:41:23 FLIGetFilterPos err=0 currentPosition=0 02:41:23 FLIGetStepsRemaining err=0 RemainingSteps=0 02:41:23 Filter is already there-color wheel unchanged 02:41:23 Received message from Master: op=Shutter serial=50483 02:41:23 Shutter LASER close 02:41:23 Received message from Camera: op=State serial=50485 02:41:23 GetSingleValue result=40 Value=cccccccc 02:41:23 SkyScan query 02:41:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:41:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:41:24 Parameters OK 02:41:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:41:24 Set A/D data flow result=40 02:41:24 Set A/D channel type result=40 02:41:24 Set A/D encoding result=40 02:41:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:41:24 Set channel filter=0.000000e+000 result=40 02:41:24 Config A/D Result=40 02:41:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:41:24 Get A/D filter: -9.255963e+061 result=40 02:41:24 Get A/D value=-858993460 result=40 02:41:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:41:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:41:24 Parameters OK 02:41:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:41:24 Set A/D data flow result=40 02:41:24 Set A/D channel type result=40 02:41:24 Set A/D encoding result=40 02:41:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:41:24 Set channel filter=0.000000e+000 result=40 02:41:24 Config A/D Result=40 02:41:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:41:24 Get A/D filter: -9.255963e+061 result=40 02:41:24 Get A/D value=-858993460 result=40 02:41:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:41:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:41:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:41:24 Aux= 02:41:24 Message to Camera, serial 50485 queued 02:42:01 Received message from Master: op=PointingHead serial=50498 02:42:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:42:01 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:42:01 Point started: ret=0 02:42:01 point_skyscan result=0 02:42:02 Check angles 02:42:02 SkyScan query 02:42:03 SkyScan query done: ret=0 az=108.795<-7253 ze=38.49<-9434 Statuses=0009 0008 02:42:03 Msec=0 True Az=108.795 Ze=38.49 Az status=0009 Ze status=0008 02:42:03 Check angles 02:42:03 SkyScan query 02:42:03 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 02:42:03 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 02:42:04 Check angles 02:42:04 SkyScan query 02:42:04 SkyScan query done: ret=0 az=144.105<-9607 ze=38.505<-9433 Statuses=0009 0008 02:42:04 Msec=1500 True Az=144.105 Ze=38.505 Az status=0009 Ze status=0008 02:42:04 Check angles 02:42:04 SkyScan query 02:42:05 SkyScan query done: ret=0 az=161.505<-10767 ze=38.505<-9433 Statuses=0009 0008 02:42:05 Msec=2250 True Az=161.505 Ze=38.505 Az status=0009 Ze status=0008 02:42:05 Check angles 02:42:05 SkyScan query 02:42:06 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 02:42:06 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 02:42:06 Check angles 02:42:06 SkyScan query 02:42:06 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 02:42:06 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 02:42:06 Message to Master queued w/err=0: serial=50498 error=0 02:42:11 Received message from Master: op=Filter serial=50499 02:42:11 Color wheel filter change from 0 to 0 02:42:11 FLIGetFilterPos err=0 currentPosition=0 02:42:11 FLIGetStepsRemaining err=0 RemainingSteps=0 02:42:11 Filter is already there-color wheel unchanged 02:42:12 Received message from Master: op=Shutter serial=50500 02:42:12 Shutter LASER close 02:42:12 Received message from Camera: op=State serial=50502 02:42:12 GetSingleValue result=40 Value=cccccccc 02:42:12 SkyScan query 02:42:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:42:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:42:12 Parameters OK 02:42:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:42:12 Set A/D data flow result=40 02:42:12 Set A/D channel type result=40 02:42:12 Set A/D encoding result=40 02:42:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:42:12 Set channel filter=0.000000e+000 result=40 02:42:12 Config A/D Result=40 02:42:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:42:12 Get A/D filter: -9.255963e+061 result=40 02:42:12 Get A/D value=-858993460 result=40 02:42:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:42:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:42:12 Parameters OK 02:42:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:42:12 Set A/D data flow result=40 02:42:12 Set A/D channel type result=40 02:42:12 Set A/D encoding result=40 02:42:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:42:12 Set channel filter=0.000000e+000 result=40 02:42:12 Config A/D Result=40 02:42:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:42:12 Get A/D filter: -9.255963e+061 result=40 02:42:12 Get A/D value=-858993460 result=40 02:42:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:42:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:42:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:42:12 Aux= 02:42:12 Message to Camera, serial 50502 queued 02:42:49 Received message from Master: op=PointingHead serial=50515 02:42:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:42:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:42:49 Point started: ret=0 02:42:49 point_skyscan result=0 02:42:50 Check angles 02:42:50 SkyScan query 02:42:51 SkyScan query done: ret=0 az=153.195<-10213 ze=8.94<-11404 Statuses=0009 0009 02:42:51 Msec=0 True Az=153.195 Ze=8.94 Az status=0009 Ze status=0009 02:42:51 Check angles 02:42:51 SkyScan query 02:42:51 SkyScan query done: ret=0 az=135.78<-9052 ze=-12.06<-12804 Statuses=0009 0009 02:42:51 Msec=750 True Az=135.78 Ze=-12.06 Az status=0009 Ze status=0009 02:42:52 Check angles 02:42:52 SkyScan query 02:42:52 SkyScan query done: ret=0 az=118.245<-7883 ze=-32.955<-14197 Statuses=0009 0009 02:42:52 Msec=1500 True Az=118.245 Ze=-32.955 Az status=0009 Ze status=0009 02:42:52 Check angles 02:42:52 SkyScan query 02:42:53 SkyScan query done: ret=0 az=100.74<-6716 ze=-51.51<-15434 Statuses=0009 0009 02:42:53 Msec=2250 True Az=100.74 Ze=-51.51 Az status=0009 Ze status=0009 02:42:53 Check angles 02:42:53 SkyScan query 02:42:54 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 02:42:54 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 02:42:54 Check angles 02:42:54 SkyScan query 02:42:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:42:54 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:42:54 Message to Master queued w/err=0: serial=50515 error=0 02:42:59 Received message from Master: op=Filter serial=50516 02:42:59 Color wheel filter change from 0 to 0 02:42:59 FLIGetFilterPos err=0 currentPosition=0 02:42:59 FLIGetStepsRemaining err=0 RemainingSteps=0 02:42:59 Filter is already there-color wheel unchanged 02:43:00 Received message from Master: op=Shutter serial=50517 02:43:00 Shutter LASER close 02:43:00 Received message from Camera: op=State serial=50519 02:43:00 GetSingleValue result=40 Value=cccccccc 02:43:00 SkyScan query 02:43:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:43:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:43:00 Parameters OK 02:43:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:43:00 Set A/D data flow result=40 02:43:00 Set A/D channel type result=40 02:43:00 Set A/D encoding result=40 02:43:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:43:00 Set channel filter=0.000000e+000 result=40 02:43:00 Config A/D Result=40 02:43:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:43:00 Get A/D filter: -9.255963e+061 result=40 02:43:00 Get A/D value=-858993460 result=40 02:43:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:43:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:43:00 Parameters OK 02:43:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:43:00 Set A/D data flow result=40 02:43:00 Set A/D channel type result=40 02:43:00 Set A/D encoding result=40 02:43:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:43:00 Set channel filter=0.000000e+000 result=40 02:43:00 Config A/D Result=40 02:43:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:43:00 Get A/D filter: -9.255963e+061 result=40 02:43:00 Get A/D value=-858993460 result=40 02:43:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:43:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:43:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:43:00 Aux= 02:43:00 Message to Camera, serial 50519 queued 02:43:37 Received message from Master: op=PointingHead serial=50532 02:43:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:43:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:43:37 Point started: ret=0 02:43:37 point_skyscan result=0 02:43:38 Check angles 02:43:38 SkyScan query 02:43:39 SkyScan query done: ret=0 az=109.515<-7301 ze=-81.78<-17452 Statuses=0009 0009 02:43:39 Msec=0 True Az=109.515 Ze=-81.78 Az status=0009 Ze status=0009 02:43:39 Check angles 02:43:39 SkyScan query 02:43:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.75<-18850 Statuses=0008 0009 02:43:39 Msec=750 True Az=112.995 Ze=-102.75 Az status=0008 Ze status=0009 02:43:40 Check angles 02:43:40 SkyScan query 02:43:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.705<-20247 Statuses=0008 0009 02:43:40 Msec=1500 True Az=112.995 Ze=-123.705 Az status=0008 Ze status=0009 02:43:40 Check angles 02:43:40 SkyScan query 02:43:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.66<-21644 Statuses=0008 0009 02:43:41 Msec=2250 True Az=112.995 Ze=-144.66 Az status=0008 Ze status=0009 02:43:41 Check angles 02:43:41 SkyScan query 02:43:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.585<-23039 Statuses=0008 0009 02:43:42 Msec=3000 True Az=112.995 Ze=-165.585 Az status=0008 Ze status=0009 02:43:42 Check angles 02:43:42 SkyScan query 02:43:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:43:42 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:43:42 Message to Master queued w/err=0: serial=50532 error=0 02:43:47 Received message from Master: op=Filter serial=50533 02:43:47 Color wheel filter change from 0 to 0 02:43:47 FLIGetFilterPos err=0 currentPosition=0 02:43:47 FLIGetStepsRemaining err=0 RemainingSteps=0 02:43:47 Filter is already there-color wheel unchanged 02:43:48 Received message from Master: op=Shutter serial=50534 02:43:48 Shutter LASER open 02:43:48 Received message from Camera: op=State serial=50536 02:43:48 GetSingleValue result=40 Value=cccccccc 02:43:48 SkyScan query 02:43:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:43:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:43:48 Parameters OK 02:43:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:43:48 Set A/D data flow result=40 02:43:48 Set A/D channel type result=40 02:43:48 Set A/D encoding result=40 02:43:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:43:48 Set channel filter=0.000000e+000 result=40 02:43:48 Config A/D Result=40 02:43:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:43:48 Get A/D filter: -9.255963e+061 result=40 02:43:48 Get A/D value=-858993460 result=40 02:43:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:43:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:43:48 Parameters OK 02:43:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:43:48 Set A/D data flow result=40 02:43:48 Set A/D channel type result=40 02:43:48 Set A/D encoding result=40 02:43:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:43:48 Set channel filter=0.000000e+000 result=40 02:43:48 Config A/D Result=40 02:43:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:43:48 Get A/D filter: -9.255963e+061 result=40 02:43:48 Get A/D value=-858993460 result=40 02:43:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:43:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:43:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:43:48 Aux= 02:43:48 Message to Camera, serial 50536 queued 02:43:57 Received message from Master: op=Shutter serial=50546 02:43:57 Shutter LASER close 02:43:57 Received message from Master: op=PointingHead serial=50550 02:43:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:43:57 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:43:58 Point started: ret=0 02:43:58 point_skyscan result=0 02:43:58 Check angles 02:43:58 SkyScan query 02:43:59 SkyScan query done: ret=0 az=89.88<-5992 ze=157.32<-1512 Statuses=0009 0009 02:43:59 Msec=0 True Az=89.88 Ze=157.32 Az status=0009 Ze status=0009 02:43:59 Check angles 02:43:59 SkyScan query 02:44:00 SkyScan query done: ret=0 az=72.525<-4835 ze=136.335<-2911 Statuses=0009 0009 02:44:00 Msec=750 True Az=72.525 Ze=136.335 Az status=0009 Ze status=0009 02:44:00 Check angles 02:44:00 SkyScan query 02:44:00 SkyScan query done: ret=0 az=54.825<-3655 ze=114.96<-4336 Statuses=0009 0009 02:44:00 Msec=1500 True Az=54.825 Ze=114.96 Az status=0009 Ze status=0009 02:44:01 Check angles 02:44:01 SkyScan query 02:44:01 SkyScan query done: ret=0 az=40.935<-2729 ze=93.57<-5762 Statuses=0009 0009 02:44:01 Msec=2250 True Az=40.935 Ze=93.57 Az status=0009 Ze status=0009 02:44:01 Check angles 02:44:01 SkyScan query 02:44:02 SkyScan query done: ret=0 az=40.995<-2733 ze=72.615<-7159 Statuses=0008 0009 02:44:02 Msec=3000 True Az=40.995 Ze=72.615 Az status=0008 Ze status=0009 02:44:02 Check angles 02:44:02 SkyScan query 02:44:03 SkyScan query done: ret=0 az=40.995<-2733 ze=52.35<-8510 Statuses=0008 0009 02:44:03 Msec=3750 True Az=40.995 Ze=52.35 Az status=0008 Ze status=0009 02:44:03 Check angles 02:44:03 SkyScan query 02:44:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:44:03 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:44:03 Message to Master queued w/err=0: serial=50550 error=0 02:44:08 Received message from Master: op=Filter serial=50551 02:44:08 Color wheel filter change from 0 to 0 02:44:08 FLIGetFilterPos err=0 currentPosition=0 02:44:08 FLIGetStepsRemaining err=0 RemainingSteps=0 02:44:08 Filter is already there-color wheel unchanged 02:44:09 Received message from Master: op=Shutter serial=50552 02:44:09 Shutter LASER close 02:44:09 Received message from Camera: op=State serial=50554 02:44:09 GetSingleValue result=40 Value=cccccccc 02:44:09 SkyScan query 02:44:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:44:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:44:09 Parameters OK 02:44:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:44:09 Set A/D data flow result=40 02:44:09 Set A/D channel type result=40 02:44:09 Set A/D encoding result=40 02:44:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:44:09 Set channel filter=0.000000e+000 result=40 02:44:09 Config A/D Result=40 02:44:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:44:09 Get A/D filter: -9.255963e+061 result=40 02:44:09 Get A/D value=-858993460 result=40 02:44:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:44:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:44:09 Parameters OK 02:44:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:44:09 Set A/D data flow result=40 02:44:09 Set A/D channel type result=40 02:44:09 Set A/D encoding result=40 02:44:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:44:09 Set channel filter=0.000000e+000 result=40 02:44:09 Config A/D Result=40 02:44:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:44:09 Get A/D filter: -9.255963e+061 result=40 02:44:09 Get A/D value=-858993460 result=40 02:44:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:44:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:44:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:44:09 Aux= 02:44:09 Message to Camera, serial 50554 queued 02:44:46 Received message from Master: op=PointingHead serial=50567 02:44:46 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 02:44:46 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 02:44:47 Point started: ret=0 02:44:47 point_skyscan result=0 02:44:47 Check angles 02:44:47 SkyScan query 02:44:48 SkyScan query done: ret=0 az=63.945<-4263 ze=66.555<-7563 Statuses=0009 0008 02:44:48 Msec=0 True Az=63.945 Ze=66.555 Az status=0009 Ze status=0008 02:44:48 Check angles 02:44:48 SkyScan query 02:44:49 SkyScan query done: ret=0 az=81.705<-5447 ze=66.51<-7566 Statuses=0009 0008 02:44:49 Msec=750 True Az=81.705 Ze=66.51 Az status=0009 Ze status=0008 02:44:49 Check angles 02:44:49 SkyScan query 02:44:49 SkyScan query done: ret=0 az=99.345<-6623 ze=66.495<-7567 Statuses=0009 0008 02:44:49 Msec=1500 True Az=99.345 Ze=66.495 Az status=0009 Ze status=0008 02:44:50 Check angles 02:44:50 SkyScan query 02:44:50 SkyScan query done: ret=0 az=116.925<-7795 ze=66.495<-7567 Statuses=0009 0008 02:44:50 Msec=2250 True Az=116.925 Ze=66.495 Az status=0009 Ze status=0008 02:44:50 Check angles 02:44:50 SkyScan query 02:44:51 SkyScan query done: ret=0 az=134.625<-8975 ze=66.495<-7567 Statuses=0009 0008 02:44:51 Msec=3000 True Az=134.625 Ze=66.495 Az status=0009 Ze status=0008 02:44:51 Check angles 02:44:51 SkyScan query 02:44:52 SkyScan query done: ret=0 az=152.1<-10140 ze=66.495<-7567 Statuses=0009 0008 02:44:52 Msec=3750 True Az=152.1 Ze=66.495 Az status=0009 Ze status=0008 02:44:52 Check angles 02:44:52 SkyScan query 02:44:52 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:44:52 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 02:44:52 Message to Master queued w/err=0: serial=50567 error=0 02:44:57 Received message from Master: op=Filter serial=50568 02:44:57 Color wheel filter change from 0 to 0 02:44:57 FLIGetFilterPos err=0 currentPosition=0 02:44:57 FLIGetStepsRemaining err=0 RemainingSteps=0 02:44:57 Filter is already there-color wheel unchanged 02:44:58 Received message from Master: op=Shutter serial=50569 02:44:58 Shutter LASER close 02:44:58 Received message from Camera: op=State serial=50571 02:44:58 GetSingleValue result=40 Value=cccccccc 02:44:58 SkyScan query 02:44:58 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:44:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:44:58 Parameters OK 02:44:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:44:58 Set A/D data flow result=40 02:44:58 Set A/D channel type result=40 02:44:58 Set A/D encoding result=40 02:44:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:44:58 Set channel filter=0.000000e+000 result=40 02:44:58 Config A/D Result=40 02:44:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:44:58 Get A/D filter: -9.255963e+061 result=40 02:44:58 Get A/D value=-858993460 result=40 02:44:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:44:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:44:58 Parameters OK 02:44:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:44:58 Set A/D data flow result=40 02:44:58 Set A/D channel type result=40 02:44:58 Set A/D encoding result=40 02:44:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:44:58 Set channel filter=0.000000e+000 result=40 02:44:58 Config A/D Result=40 02:44:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:44:58 Get A/D filter: -9.255963e+061 result=40 02:44:58 Get A/D value=-858993460 result=40 02:44:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:44:58 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:44:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:44:58 Aux= 02:44:58 Message to Camera, serial 50571 queued 02:45:29 Received message from Master: op=Identify serial=50574 02:45:35 Received message from Master: op=PointingHead serial=50587 02:45:35 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:45:35 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:45:35 Point started: ret=0 02:45:35 point_skyscan result=0 02:45:36 Check angles 02:45:36 SkyScan query 02:45:37 SkyScan query done: ret=0 az=134.79<-8986 ze=36.63<-9558 Statuses=0009 0009 02:45:37 Msec=0 True Az=134.79 Ze=36.63 Az status=0009 Ze status=0009 02:45:37 Check angles 02:45:37 SkyScan query 02:45:37 SkyScan query done: ret=0 az=117.24<-7816 ze=15.63<-10958 Statuses=0009 0009 02:45:37 Msec=750 True Az=117.24 Ze=15.63 Az status=0009 Ze status=0009 02:45:38 Check angles 02:45:38 SkyScan query 02:45:38 SkyScan query done: ret=0 az=99.975<-6665 ze=-5.28<-12352 Statuses=0009 0009 02:45:38 Msec=1500 True Az=99.975 Ze=-5.28 Az status=0009 Ze status=0009 02:45:38 Check angles 02:45:38 SkyScan query 02:45:39 SkyScan query done: ret=0 az=82.41<-5494 ze=-26.22<-13748 Statuses=0009 0009 02:45:39 Msec=2250 True Az=82.41 Ze=-26.22 Az status=0009 Ze status=0009 02:45:39 Check angles 02:45:39 SkyScan query 02:45:40 SkyScan query done: ret=0 az=64.935<-4329 ze=-38.565<-14571 Statuses=0009 0008 [UTC 2018-12-11 02:45:40] 02:45:40 Msec=3000 True Az=64.935 Ze=-38.565 Az status=0009 Ze status=0008 02:45:40 Check angles 02:45:40 SkyScan query 02:45:40 SkyScan query done: ret=0 az=47.505<-3167 ze=-38.535<-14569 Statuses=0009 0008 02:45:40 Msec=3750 True Az=47.505 Ze=-38.535 Az status=0009 Ze status=0008 02:45:41 Check angles 02:45:41 SkyScan query 02:45:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:45:41 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 02:45:41 Message to Master queued w/err=0: serial=50587 error=0 02:45:46 Received message from Master: op=Filter serial=50588 02:45:46 Color wheel filter change from 0 to 0 02:45:46 FLIGetFilterPos err=0 currentPosition=0 02:45:46 FLIGetStepsRemaining err=0 RemainingSteps=0 02:45:46 Filter is already there-color wheel unchanged 02:45:46 Received message from Master: op=Shutter serial=50589 02:45:46 Shutter LASER close 02:45:46 Received message from Camera: op=State serial=50591 02:45:46 GetSingleValue result=40 Value=cccccccc 02:45:46 SkyScan query 02:45:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:45:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:45:47 Parameters OK 02:45:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:45:47 Set A/D data flow result=40 02:45:47 Set A/D channel type result=40 02:45:47 Set A/D encoding result=40 02:45:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:45:47 Set channel filter=0.000000e+000 result=40 02:45:47 Config A/D Result=40 02:45:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:45:47 Get A/D filter: -9.255963e+061 result=40 02:45:47 Get A/D value=-858993460 result=40 02:45:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:45:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:45:47 Parameters OK 02:45:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:45:47 Set A/D data flow result=40 02:45:47 Set A/D channel type result=40 02:45:47 Set A/D encoding result=40 02:45:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:45:47 Set channel filter=0.000000e+000 result=40 02:45:47 Config A/D Result=40 02:45:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:45:47 Get A/D filter: -9.255963e+061 result=40 02:45:47 Get A/D value=-858993460 result=40 02:45:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:45:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:45:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:45:47 Aux= 02:45:47 Message to Camera, serial 50591 queued 02:46:24 Received message from Master: op=PointingHead serial=50604 02:46:24 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:46:24 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:46:24 Point started: ret=0 02:46:24 point_skyscan result=0 02:46:25 Check angles 02:46:25 SkyScan query 02:46:26 SkyScan query done: ret=0 az=64.545<-4303 ze=-68.85<-16590 Statuses=0009 0009 02:46:26 Msec=0 True Az=64.545 Ze=-68.85 Az status=0009 Ze status=0009 02:46:26 Check angles 02:46:26 SkyScan query 02:46:26 SkyScan query done: ret=0 az=81.81<-5454 ze=-89.79<-17986 Statuses=0009 0009 02:46:26 Msec=750 True Az=81.81 Ze=-89.79 Az status=0009 Ze status=0009 02:46:26 Check angles 02:46:26 SkyScan query 02:46:27 SkyScan query done: ret=0 az=99.465<-6631 ze=-110.76<-19384 Statuses=0009 0009 02:46:27 Msec=1500 True Az=99.465 Ze=-110.76 Az status=0009 Ze status=0009 02:46:27 Check angles 02:46:27 SkyScan query 02:46:28 SkyScan query done: ret=0 az=116.955<-7797 ze=-131.67<-20778 Statuses=0009 0009 02:46:28 Msec=2250 True Az=116.955 Ze=-131.67 Az status=0009 Ze status=0009 02:46:28 Check angles 02:46:28 SkyScan query 02:46:29 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 02:46:29 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 02:46:29 Check angles 02:46:29 SkyScan query 02:46:29 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:46:29 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:46:29 Message to Master queued w/err=0: serial=50604 error=0 02:46:34 Received message from Master: op=Filter serial=50605 02:46:34 Color wheel filter change from 0 to 0 02:46:34 FLIGetFilterPos err=0 currentPosition=0 02:46:34 FLIGetStepsRemaining err=0 RemainingSteps=0 02:46:34 Filter is already there-color wheel unchanged 02:46:34 Received message from Master: op=Shutter serial=50606 02:46:34 Shutter LASER close 02:46:35 Received message from Camera: op=State serial=50608 02:46:35 GetSingleValue result=40 Value=cccccccc 02:46:35 SkyScan query 02:46:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:46:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:46:35 Parameters OK 02:46:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:46:35 Set A/D data flow result=40 02:46:35 Set A/D channel type result=40 02:46:35 Set A/D encoding result=40 02:46:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:46:35 Set channel filter=0.000000e+000 result=40 02:46:35 Config A/D Result=40 02:46:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:46:35 Get A/D filter: -9.255963e+061 result=40 02:46:35 Get A/D value=-858993460 result=40 02:46:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:46:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:46:35 Parameters OK 02:46:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:46:35 Set A/D data flow result=40 02:46:35 Set A/D channel type result=40 02:46:35 Set A/D encoding result=40 02:46:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:46:35 Set channel filter=0.000000e+000 result=40 02:46:35 Config A/D Result=40 02:46:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:46:35 Get A/D filter: -9.255963e+061 result=40 02:46:35 Get A/D value=-858993460 result=40 02:46:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:46:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:46:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:46:35 Aux= 02:46:35 Message to Camera, serial 50608 queued 02:47:12 Received message from Master: op=PointingHead serial=50621 02:47:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:47:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:47:12 Point started: ret=0 02:47:12 point_skyscan result=0 02:47:13 Check angles 02:47:13 SkyScan query 02:47:14 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 02:47:14 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 02:47:14 Check angles 02:47:14 SkyScan query 02:47:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:47:14 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:47:14 Message to Master queued w/err=0: serial=50621 error=0 02:47:19 Received message from Master: op=Filter serial=50622 02:47:19 Color wheel filter change from 0 to 0 02:47:19 FLIGetFilterPos err=0 currentPosition=0 02:47:19 FLIGetStepsRemaining err=0 RemainingSteps=0 02:47:19 Filter is already there-color wheel unchanged 02:47:20 Received message from Master: op=Shutter serial=50623 02:47:20 Shutter LASER open 02:47:20 Received message from Camera: op=State serial=50625 02:47:20 GetSingleValue result=40 Value=cccccccc 02:47:20 SkyScan query 02:47:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:47:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:47:20 Parameters OK 02:47:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:47:20 Set A/D data flow result=40 02:47:20 Set A/D channel type result=40 02:47:20 Set A/D encoding result=40 02:47:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:47:20 Set channel filter=0.000000e+000 result=40 02:47:20 Config A/D Result=40 02:47:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:47:20 Get A/D filter: -9.255963e+061 result=40 02:47:20 Get A/D value=-858993460 result=40 02:47:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:47:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:47:20 Parameters OK 02:47:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:47:20 Set A/D data flow result=40 02:47:20 Set A/D channel type result=40 02:47:20 Set A/D encoding result=40 02:47:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:47:20 Set channel filter=0.000000e+000 result=40 02:47:20 Config A/D Result=40 02:47:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:47:20 Get A/D filter: -9.255963e+061 result=40 02:47:20 Get A/D value=-858993460 result=40 02:47:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:47:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:47:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:47:20 Aux= 02:47:20 Message to Camera, serial 50625 queued 02:47:29 Received message from Master: op=Shutter serial=50635 02:47:29 Shutter LASER close 02:47:29 Received message from Master: op=PointingHead serial=50639 02:47:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:47:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:47:30 Point started: ret=0 02:47:30 point_skyscan result=0 02:47:31 Check angles 02:47:31 SkyScan query 02:47:31 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.785<-21519 Statuses=0009 0009 02:47:31 Msec=0 True Az=136.35 Ze=-142.785 Az status=0009 Ze status=0009 02:47:31 Check angles 02:47:31 SkyScan query 02:47:32 SkyScan query done: ret=0 az=153.78<-10252 ze=-121.83<-20122 Statuses=0009 0009 02:47:32 Msec=750 True Az=153.78 Ze=-121.83 Az status=0009 Ze status=0009 02:47:32 Check angles 02:47:32 SkyScan query 02:47:33 SkyScan query done: ret=0 az=171.585<-11439 ze=-100.395<-18693 Statuses=0009 0009 02:47:33 Msec=1500 True Az=171.585 Ze=-100.395 Az status=0009 Ze status=0009 02:47:33 Check angles 02:47:33 SkyScan query 02:47:33 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.515<-17301 Statuses=0008 0009 02:47:33 Msec=2250 True Az=176.025 Ze=-79.515 Az status=0008 Ze status=0009 02:47:34 Check angles 02:47:34 SkyScan query 02:47:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.515<-15901 Statuses=0008 0009 02:47:34 Msec=3000 True Az=175.995 Ze=-58.515 Az status=0008 Ze status=0009 02:47:34 Check angles 02:47:34 SkyScan query 02:47:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 02:47:35 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 02:47:35 Message to Master queued w/err=0: serial=50639 error=0 02:47:40 Received message from Master: op=Filter serial=50640 02:47:40 Color wheel filter change from 0 to 0 02:47:40 FLIGetFilterPos err=0 currentPosition=0 02:47:40 FLIGetStepsRemaining err=0 RemainingSteps=0 02:47:40 Filter is already there-color wheel unchanged 02:47:40 Received message from Master: op=Shutter serial=50641 02:47:40 Shutter LASER close 02:47:40 Received message from Camera: op=State serial=50643 02:47:40 GetSingleValue result=40 Value=cccccccc 02:47:40 SkyScan query 02:47:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:47:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:47:41 Parameters OK 02:47:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:47:41 Set A/D data flow result=40 02:47:41 Set A/D channel type result=40 02:47:41 Set A/D encoding result=40 02:47:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:47:41 Set channel filter=0.000000e+000 result=40 02:47:41 Config A/D Result=40 02:47:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:47:41 Get A/D filter: -9.255963e+061 result=40 02:47:41 Get A/D value=-858993460 result=40 02:47:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:47:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:47:41 Parameters OK 02:47:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:47:41 Set A/D data flow result=40 02:47:41 Set A/D channel type result=40 02:47:41 Set A/D encoding result=40 02:47:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:47:41 Set channel filter=0.000000e+000 result=40 02:47:41 Config A/D Result=40 02:47:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:47:41 Get A/D filter: -9.255963e+061 result=40 02:47:41 Get A/D value=-858993460 result=40 02:47:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:47:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:47:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:47:41 Aux= 02:47:41 Message to Camera, serial 50643 queued 02:48:18 Received message from Master: op=PointingHead serial=50656 02:48:18 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:48:18 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:48:18 Point started: ret=0 02:48:18 point_skyscan result=0 02:48:19 Check angles 02:48:19 SkyScan query 02:48:19 SkyScan query done: ret=0 az=152.565<-10171 ze=-21.195<-13413 Statuses=0009 0009 02:48:19 Msec=0 True Az=152.565 Ze=-21.195 Az status=0009 Ze status=0009 02:48:20 Check angles 02:48:20 SkyScan query 02:48:20 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.24<-12016 Statuses=0009 0009 02:48:20 Msec=750 True Az=135.12 Ze=-0.24 Az status=0009 Ze status=0009 02:48:20 Check angles 02:48:20 SkyScan query 02:48:21 SkyScan query done: ret=0 az=117.495<-7833 ze=20.715<-10619 Statuses=0009 0009 02:48:21 Msec=1500 True Az=117.495 Ze=20.715 Az status=0009 Ze status=0009 02:48:21 Check angles 02:48:21 SkyScan query 02:48:22 SkyScan query done: ret=0 az=100.14<-6676 ze=41.655<-9223 Statuses=0009 0009 02:48:22 Msec=2250 True Az=100.14 Ze=41.655 Az status=0009 Ze status=0009 02:48:22 Check angles 02:48:22 SkyScan query 02:48:22 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 02:48:22 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 02:48:23 Check angles 02:48:23 SkyScan query 02:48:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:48:23 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:48:23 Message to Master queued w/err=0: serial=50656 error=0 02:48:28 Received message from Master: op=Filter serial=50657 02:48:28 Color wheel filter change from 0 to 0 02:48:28 FLIGetFilterPos err=0 currentPosition=0 02:48:28 FLIGetStepsRemaining err=0 RemainingSteps=0 02:48:28 Filter is already there-color wheel unchanged 02:48:28 Received message from Master: op=Shutter serial=50658 02:48:28 Shutter LASER close 02:48:28 Received message from Camera: op=State serial=50660 02:48:28 GetSingleValue result=40 Value=cccccccc 02:48:28 SkyScan query 02:48:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:48:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:48:29 Parameters OK 02:48:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:48:29 Set A/D data flow result=40 02:48:29 Set A/D channel type result=40 02:48:29 Set A/D encoding result=40 02:48:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:48:29 Set channel filter=0.000000e+000 result=40 02:48:29 Config A/D Result=40 02:48:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:48:29 Get A/D filter: -9.255963e+061 result=40 02:48:29 Get A/D value=-858993460 result=40 02:48:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:48:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:48:29 Parameters OK 02:48:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:48:29 Set A/D data flow result=40 02:48:29 Set A/D channel type result=40 02:48:29 Set A/D encoding result=40 02:48:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:48:29 Set channel filter=0.000000e+000 result=40 02:48:29 Config A/D Result=40 02:48:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:48:29 Get A/D filter: -9.255963e+061 result=40 02:48:29 Get A/D value=-858993460 result=40 02:48:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:48:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:48:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:48:29 Aux= 02:48:29 Message to Camera, serial 50660 queued 02:49:06 Received message from Master: op=PointingHead serial=50673 02:49:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:49:06 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:49:06 Point started: ret=0 02:49:06 point_skyscan result=0 02:49:07 Check angles 02:49:07 SkyScan query 02:49:07 SkyScan query done: ret=0 az=109.005<-7267 ze=38.49<-9434 Statuses=0009 0008 02:49:07 Msec=0 True Az=109.005 Ze=38.49 Az status=0009 Ze status=0008 02:49:08 Check angles 02:49:08 SkyScan query 02:49:08 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 02:49:08 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 02:49:08 Check angles 02:49:08 SkyScan query 02:49:09 SkyScan query done: ret=0 az=144.045<-9603 ze=38.505<-9433 Statuses=0009 0008 02:49:09 Msec=1500 True Az=144.045 Ze=38.505 Az status=0009 Ze status=0008 02:49:09 Check angles 02:49:09 SkyScan query 02:49:10 SkyScan query done: ret=0 az=161.4<-10760 ze=38.505<-9433 Statuses=0009 0008 02:49:10 Msec=2250 True Az=161.4 Ze=38.505 Az status=0009 Ze status=0008 02:49:10 Check angles 02:49:10 SkyScan query 02:49:10 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 02:49:10 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 02:49:11 Check angles 02:49:11 SkyScan query 02:49:11 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 02:49:11 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 02:49:11 Message to Master queued w/err=0: serial=50673 error=0 02:49:16 Received message from Master: op=Filter serial=50674 02:49:16 Color wheel filter change from 0 to 0 02:49:16 FLIGetFilterPos err=0 currentPosition=0 02:49:16 FLIGetStepsRemaining err=0 RemainingSteps=0 02:49:16 Filter is already there-color wheel unchanged 02:49:16 Received message from Master: op=Shutter serial=50675 02:49:16 Shutter LASER close 02:49:16 Received message from Camera: op=State serial=50677 02:49:16 GetSingleValue result=40 Value=cccccccc 02:49:16 SkyScan query 02:49:17 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:49:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:49:17 Parameters OK 02:49:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:49:17 Set A/D data flow result=40 02:49:17 Set A/D channel type result=40 02:49:17 Set A/D encoding result=40 02:49:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:49:17 Set channel filter=0.000000e+000 result=40 02:49:17 Config A/D Result=40 02:49:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:49:17 Get A/D filter: -9.255963e+061 result=40 02:49:17 Get A/D value=-858993460 result=40 02:49:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:49:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:49:17 Parameters OK 02:49:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:49:17 Set A/D data flow result=40 02:49:17 Set A/D channel type result=40 02:49:17 Set A/D encoding result=40 02:49:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:49:17 Set channel filter=0.000000e+000 result=40 02:49:17 Config A/D Result=40 02:49:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:49:17 Get A/D filter: -9.255963e+061 result=40 02:49:17 Get A/D value=-858993460 result=40 02:49:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:49:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:49:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:49:17 Aux= 02:49:17 Message to Camera, serial 50677 queued 02:49:54 Received message from Master: op=PointingHead serial=50690 02:49:54 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:49:54 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:49:54 Point started: ret=0 02:49:54 point_skyscan result=0 02:49:55 Check angles 02:49:55 SkyScan query 02:49:55 SkyScan query done: ret=0 az=152.955<-10197 ze=8.49<-11434 Statuses=0009 0009 02:49:55 Msec=0 True Az=152.955 Ze=8.49 Az status=0009 Ze status=0009 02:49:56 Check angles 02:49:56 SkyScan query 02:49:56 SkyScan query done: ret=0 az=135.495<-9033 ze=-12.36<-12824 Statuses=0009 0009 02:49:56 Msec=750 True Az=135.495 Ze=-12.36 Az status=0009 Ze status=0009 02:49:56 Check angles 02:49:56 SkyScan query 02:49:57 SkyScan query done: ret=0 az=117.975<-7865 ze=-33.27<-14218 Statuses=0009 0009 02:49:57 Msec=1500 True Az=117.975 Ze=-33.27 Az status=0009 Ze status=0009 02:49:57 Check angles 02:49:57 SkyScan query 02:49:58 SkyScan query done: ret=0 az=100.545<-6703 ze=-51.54<-15436 Statuses=0009 0009 02:49:58 Msec=2250 True Az=100.545 Ze=-51.54 Az status=0009 Ze status=0009 02:49:58 Check angles 02:49:58 SkyScan query 02:49:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 02:49:58 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 02:49:59 Check angles 02:49:59 SkyScan query 02:49:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:49:59 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:49:59 Message to Master queued w/err=0: serial=50690 error=0 02:50:04 Received message from Master: op=Filter serial=50691 02:50:04 Color wheel filter change from 0 to 0 02:50:04 FLIGetFilterPos err=0 currentPosition=0 02:50:04 FLIGetStepsRemaining err=0 RemainingSteps=0 02:50:04 Filter is already there-color wheel unchanged 02:50:04 Received message from Master: op=Shutter serial=50692 02:50:04 Shutter LASER close 02:50:04 Received message from Camera: op=State serial=50694 02:50:04 GetSingleValue result=40 Value=cccccccc 02:50:04 SkyScan query 02:50:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:50:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:50:05 Parameters OK 02:50:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:50:05 Set A/D data flow result=40 02:50:05 Set A/D channel type result=40 02:50:05 Set A/D encoding result=40 02:50:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:50:05 Set channel filter=0.000000e+000 result=40 02:50:05 Config A/D Result=40 02:50:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:50:05 Get A/D filter: -9.255963e+061 result=40 02:50:05 Get A/D value=-858993460 result=40 02:50:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:50:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:50:05 Parameters OK 02:50:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:50:05 Set A/D data flow result=40 02:50:05 Set A/D channel type result=40 02:50:05 Set A/D encoding result=40 02:50:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:50:05 Set channel filter=0.000000e+000 result=40 02:50:05 Config A/D Result=40 02:50:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:50:05 Get A/D filter: -9.255963e+061 result=40 02:50:05 Get A/D value=-858993460 result=40 02:50:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:50:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:50:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:50:05 Aux= 02:50:05 Message to Camera, serial 50694 queued 02:50:42 Received message from Master: op=PointingHead serial=50707 02:50:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:50:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:50:42 Point started: ret=0 02:50:42 point_skyscan result=0 02:50:43 Check angles 02:50:43 SkyScan query 02:50:44 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.135<-17409 Statuses=0009 0009 02:50:44 Msec=0 True Az=108.825 Ze=-81.135 Az status=0009 Ze status=0009 02:50:44 Check angles 02:50:44 SkyScan query 02:50:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.09<-18806 Statuses=0008 0009 02:50:44 Msec=750 True Az=112.995 Ze=-102.09 Az status=0008 Ze status=0009 02:50:44 Check angles 02:50:44 SkyScan query 02:50:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.045<-20203 Statuses=0008 0009 02:50:45 Msec=1500 True Az=112.995 Ze=-123.045 Az status=0008 Ze status=0009 02:50:45 Check angles 02:50:45 SkyScan query 02:50:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-144<-21600 Statuses=0008 0009 02:50:46 Msec=2250 True Az=112.995 Ze=-144 Az status=0008 Ze status=0009 02:50:46 Check angles 02:50:46 SkyScan query 02:50:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.97<-22998 Statuses=0008 0009 02:50:47 Msec=3000 True Az=112.995 Ze=-164.97 Az status=0008 Ze status=0009 02:50:47 Check angles 02:50:47 SkyScan query 02:50:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:50:47 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:50:47 Message to Master queued w/err=0: serial=50707 error=0 02:50:52 Received message from Master: op=Filter serial=50708 02:50:52 Color wheel filter change from 0 to 0 02:50:52 FLIGetFilterPos err=0 currentPosition=0 02:50:52 FLIGetStepsRemaining err=0 RemainingSteps=0 02:50:52 Filter is already there-color wheel unchanged 02:50:52 Received message from Master: op=Shutter serial=50709 02:50:52 Shutter LASER open 02:50:53 Received message from Camera: op=State serial=50711 02:50:53 GetSingleValue result=40 Value=cccccccc 02:50:53 SkyScan query 02:50:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:50:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:50:53 Parameters OK 02:50:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:50:53 Set A/D data flow result=40 02:50:53 Set A/D channel type result=40 02:50:53 Set A/D encoding result=40 02:50:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:50:53 Set channel filter=0.000000e+000 result=40 02:50:53 Config A/D Result=40 02:50:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:50:53 Get A/D filter: -9.255963e+061 result=40 02:50:53 Get A/D value=-858993460 result=40 02:50:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:50:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:50:53 Parameters OK 02:50:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:50:53 Set A/D data flow result=40 02:50:53 Set A/D channel type result=40 02:50:53 Set A/D encoding result=40 02:50:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:50:53 Set channel filter=0.000000e+000 result=40 02:50:53 Config A/D Result=40 02:50:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:50:53 Get A/D filter: -9.255963e+061 result=40 02:50:53 Get A/D value=-858993460 result=40 02:50:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:50:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:50:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:50:53 Aux= 02:50:53 Message to Camera, serial 50711 queued 02:51:02 Received message from Master: op=Shutter serial=50721 02:51:02 Shutter LASER close 02:51:02 Received message from Master: op=PointingHead serial=50725 02:51:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:51:02 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:51:02 Point started: ret=0 02:51:02 point_skyscan result=0 02:51:03 Check angles 02:51:03 SkyScan query 02:51:04 SkyScan query done: ret=0 az=90.195<-6013 ze=157.56<-1496 Statuses=0009 0009 02:51:04 Msec=0 True Az=90.195 Ze=157.56 Az status=0009 Ze status=0009 02:51:04 Check angles 02:51:04 SkyScan query 02:51:04 SkyScan query done: ret=0 az=72.33<-4822 ze=136.095<-2927 Statuses=0009 0009 02:51:04 Msec=750 True Az=72.33 Ze=136.095 Az status=0009 Ze status=0009 02:51:05 Check angles 02:51:05 SkyScan query 02:51:05 SkyScan query done: ret=0 az=54.705<-3647 ze=114.78<-4348 Statuses=0009 0009 02:51:05 Msec=1500 True Az=54.705 Ze=114.78 Az status=0009 Ze status=0009 02:51:05 Check angles 02:51:05 SkyScan query 02:51:06 SkyScan query done: ret=0 az=40.905<-2727 ze=93.795<-5747 Statuses=0009 0009 02:51:06 Msec=2250 True Az=40.905 Ze=93.795 Az status=0009 Ze status=0009 02:51:06 Check angles 02:51:06 SkyScan query 02:51:07 SkyScan query done: ret=0 az=40.995<-2733 ze=72.84<-7144 Statuses=0008 0009 02:51:07 Msec=3000 True Az=40.995 Ze=72.84 Az status=0008 Ze status=0009 02:51:07 Check angles 02:51:07 SkyScan query 02:51:08 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 02:51:08 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 02:51:08 Check angles 02:51:08 SkyScan query 02:51:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:51:08 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:51:08 Message to Master queued w/err=0: serial=50725 error=0 02:51:13 Received message from Master: op=Filter serial=50726 02:51:13 Color wheel filter change from 0 to 0 02:51:13 FLIGetFilterPos err=0 currentPosition=0 02:51:13 FLIGetStepsRemaining err=0 RemainingSteps=0 02:51:13 Filter is already there-color wheel unchanged 02:51:13 Received message from Master: op=Shutter serial=50727 02:51:13 Shutter LASER close 02:51:14 Received message from Camera: op=State serial=50729 02:51:14 GetSingleValue result=40 Value=cccccccc 02:51:14 SkyScan query 02:51:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:51:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:51:14 Parameters OK 02:51:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:51:14 Set A/D data flow result=40 02:51:14 Set A/D channel type result=40 02:51:14 Set A/D encoding result=40 02:51:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:51:14 Set channel filter=0.000000e+000 result=40 02:51:14 Config A/D Result=40 02:51:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:51:14 Get A/D filter: -9.255963e+061 result=40 02:51:14 Get A/D value=-858993460 result=40 02:51:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:51:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:51:14 Parameters OK 02:51:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:51:14 Set A/D data flow result=40 02:51:14 Set A/D channel type result=40 02:51:14 Set A/D encoding result=40 02:51:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:51:14 Set channel filter=0.000000e+000 result=40 02:51:14 Config A/D Result=40 02:51:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:51:14 Get A/D filter: -9.255963e+061 result=40 02:51:14 Get A/D value=-858993460 result=40 02:51:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:51:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:51:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:51:14 Aux= 02:51:14 Message to Camera, serial 50729 queued 02:51:50 Received message from Master: op=PointingHead serial=50741 02:51:50 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 02:51:50 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 02:51:50 Point started: ret=0 02:51:50 point_skyscan result=0 02:51:51 Check angles 02:51:51 SkyScan query 02:51:52 SkyScan query done: ret=0 az=64.41<-4294 ze=66.555<-7563 Statuses=0009 0008 02:51:52 Msec=0 True Az=64.41 Ze=66.555 Az status=0009 Ze status=0008 02:51:52 Check angles 02:51:52 SkyScan query 02:51:53 SkyScan query done: ret=0 az=81.75<-5450 ze=66.495<-7567 Statuses=0009 0008 02:51:53 Msec=750 True Az=81.75 Ze=66.495 Az status=0009 Ze status=0008 02:51:53 Check angles 02:51:53 SkyScan query 02:51:53 SkyScan query done: ret=0 az=99.27<-6618 ze=66.495<-7567 Statuses=0009 0008 02:51:53 Msec=1500 True Az=99.27 Ze=66.495 Az status=0009 Ze status=0008 02:51:53 Check angles 02:51:53 SkyScan query 02:51:54 SkyScan query done: ret=0 az=116.76<-7784 ze=66.495<-7567 Statuses=0009 0008 02:51:54 Msec=2250 True Az=116.76 Ze=66.495 Az status=0009 Ze status=0008 02:51:54 Check angles 02:51:54 SkyScan query 02:51:55 SkyScan query done: ret=0 az=134.16<-8944 ze=66.495<-7567 Statuses=0009 0008 02:51:55 Msec=3000 True Az=134.16 Ze=66.495 Az status=0009 Ze status=0008 02:51:55 Check angles 02:51:55 SkyScan query 02:51:56 SkyScan query done: ret=0 az=152.115<-10141 ze=66.495<-7567 Statuses=0009 0008 02:51:56 Msec=3750 True Az=152.115 Ze=66.495 Az status=0009 Ze status=0008 02:51:56 Check angles 02:51:56 SkyScan query 02:51:56 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 02:51:56 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 02:51:56 Message to Master queued w/err=0: serial=50741 error=0 02:52:01 Received message from Master: op=Filter serial=50742 02:52:01 Color wheel filter change from 0 to 0 02:52:01 FLIGetFilterPos err=0 currentPosition=0 02:52:01 FLIGetStepsRemaining err=0 RemainingSteps=0 02:52:01 Filter is already there-color wheel unchanged 02:52:01 Received message from Master: op=Shutter serial=50743 02:52:01 Shutter LASER close 02:52:01 Received message from Camera: op=State serial=50745 02:52:01 GetSingleValue result=40 Value=cccccccc 02:52:01 SkyScan query 02:52:02 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:52:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:52:02 Parameters OK 02:52:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:52:02 Set A/D data flow result=40 02:52:02 Set A/D channel type result=40 02:52:02 Set A/D encoding result=40 02:52:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:52:02 Set channel filter=0.000000e+000 result=40 02:52:02 Config A/D Result=40 02:52:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:52:02 Get A/D filter: -9.255963e+061 result=40 02:52:02 Get A/D value=-858993460 result=40 02:52:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:52:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:52:02 Parameters OK 02:52:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:52:02 Set A/D data flow result=40 02:52:02 Set A/D channel type result=40 02:52:02 Set A/D encoding result=40 02:52:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:52:02 Set channel filter=0.000000e+000 result=40 02:52:02 Config A/D Result=40 02:52:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:52:02 Get A/D filter: -9.255963e+061 result=40 02:52:02 Get A/D value=-858993460 result=40 02:52:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:52:02 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:52:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:52:02 Aux= 02:52:02 Message to Camera, serial 50745 queued 02:52:39 Received message from Master: op=PointingHead serial=50758 02:52:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:52:39 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:52:39 Point started: ret=0 02:52:39 point_skyscan result=0 02:52:40 Check angles 02:52:40 SkyScan query 02:52:41 SkyScan query done: ret=0 az=134.565<-8971 ze=36.195<-9587 Statuses=0009 0009 02:52:41 Msec=0 True Az=134.565 Ze=36.195 Az status=0009 Ze status=0009 02:52:41 Check angles 02:52:41 SkyScan query 02:52:41 SkyScan query done: ret=0 az=117.045<-7803 ze=15.285<-10981 Statuses=0009 0009 02:52:41 Msec=750 True Az=117.045 Ze=15.285 Az status=0009 Ze status=0009 02:52:42 Check angles 02:52:42 SkyScan query 02:52:42 SkyScan query done: ret=0 az=99.735<-6649 ze=-5.715<-12381 Statuses=0009 0009 02:52:42 Msec=1500 True Az=99.735 Ze=-5.715 Az status=0009 Ze status=0009 02:52:42 Check angles 02:52:42 SkyScan query 02:52:43 SkyScan query done: ret=0 az=81.93<-5462 ze=-27.15<-13810 Statuses=0009 0009 02:52:43 Msec=2250 True Az=81.93 Ze=-27.15 Az status=0009 Ze status=0009 02:52:43 Check angles 02:52:43 SkyScan query 02:52:44 SkyScan query done: ret=0 az=63.915<-4261 ze=-38.58<-14572 Statuses=0009 0008 02:52:44 Msec=3000 True Az=63.915 Ze=-38.58 Az status=0009 Ze status=0008 02:52:44 Check angles 02:52:44 SkyScan query 02:52:44 SkyScan query done: ret=0 az=46.62<-3108 ze=-38.52<-14568 Statuses=0009 0008 02:52:44 Msec=3750 True Az=46.62 Ze=-38.52 Az status=0009 Ze status=0008 02:52:45 Check angles 02:52:45 SkyScan query 02:52:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:52:45 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 02:52:45 Message to Master queued w/err=0: serial=50758 error=0 02:52:50 Received message from Master: op=Filter serial=50759 02:52:50 Color wheel filter change from 0 to 0 02:52:50 FLIGetFilterPos err=0 currentPosition=0 02:52:50 FLIGetStepsRemaining err=0 RemainingSteps=0 02:52:50 Filter is already there-color wheel unchanged 02:52:50 Received message from Master: op=Shutter serial=50760 02:52:50 Shutter LASER close 02:52:50 Received message from Camera: op=State serial=50762 02:52:50 GetSingleValue result=40 Value=cccccccc 02:52:50 SkyScan query 02:52:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:52:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:52:51 Parameters OK 02:52:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:52:51 Set A/D data flow result=40 02:52:51 Set A/D channel type result=40 02:52:51 Set A/D encoding result=40 02:52:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:52:51 Set channel filter=0.000000e+000 result=40 02:52:51 Config A/D Result=40 02:52:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:52:51 Get A/D filter: -9.255963e+061 result=40 02:52:51 Get A/D value=-858993460 result=40 02:52:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:52:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:52:51 Parameters OK 02:52:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:52:51 Set A/D data flow result=40 02:52:51 Set A/D channel type result=40 02:52:51 Set A/D encoding result=40 02:52:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:52:51 Set channel filter=0.000000e+000 result=40 02:52:51 Config A/D Result=40 02:52:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:52:51 Get A/D filter: -9.255963e+061 result=40 02:52:51 Get A/D value=-858993460 result=40 02:52:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:52:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:52:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:52:51 Aux= 02:52:51 Message to Camera, serial 50762 queued 02:53:28 Received message from Master: op=PointingHead serial=50775 02:53:28 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:53:28 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:53:28 Point started: ret=0 02:53:28 point_skyscan result=0 02:53:29 Check angles 02:53:29 SkyScan query 02:53:29 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.4<-16560 Statuses=0009 0009 02:53:29 Msec=0 True Az=63.99 Ze=-68.4 Az status=0009 Ze status=0009 02:53:30 Check angles 02:53:30 SkyScan query 02:53:30 SkyScan query done: ret=0 az=82.035<-5469 ze=-89.82<-17988 Statuses=0009 0009 02:53:30 Msec=750 True Az=82.035 Ze=-89.82 Az status=0009 Ze status=0009 02:53:30 Check angles 02:53:30 SkyScan query 02:53:31 SkyScan query done: ret=0 az=99.6<-6640 ze=-110.79<-19386 Statuses=0009 0009 02:53:31 Msec=1500 True Az=99.6 Ze=-110.79 Az status=0009 Ze status=0009 02:53:31 Check angles 02:53:31 SkyScan query 02:53:32 SkyScan query done: ret=0 az=117.015<-7801 ze=-131.7<-20780 Statuses=0009 0009 02:53:32 Msec=2250 True Az=117.015 Ze=-131.7 Az status=0009 Ze status=0009 02:53:32 Check angles 02:53:32 SkyScan query 02:53:32 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 02:53:32 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 02:53:33 Check angles 02:53:33 SkyScan query 02:53:33 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:53:33 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:53:33 Message to Master queued w/err=0: serial=50775 error=0 02:53:38 Received message from Master: op=Filter serial=50776 02:53:38 Color wheel filter change from 0 to 0 02:53:38 FLIGetFilterPos err=0 currentPosition=0 02:53:38 FLIGetStepsRemaining err=0 RemainingSteps=0 02:53:38 Filter is already there-color wheel unchanged 02:53:38 Received message from Master: op=Shutter serial=50777 02:53:38 Shutter LASER close 02:53:38 Received message from Camera: op=State serial=50779 02:53:38 GetSingleValue result=40 Value=cccccccc 02:53:38 SkyScan query 02:53:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:53:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:53:39 Parameters OK 02:53:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:53:39 Set A/D data flow result=40 02:53:39 Set A/D channel type result=40 02:53:39 Set A/D encoding result=40 02:53:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:53:39 Set channel filter=0.000000e+000 result=40 02:53:39 Config A/D Result=40 02:53:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:53:39 Get A/D filter: -9.255963e+061 result=40 02:53:39 Get A/D value=-858993460 result=40 02:53:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:53:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:53:39 Parameters OK 02:53:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:53:39 Set A/D data flow result=40 02:53:39 Set A/D channel type result=40 02:53:39 Set A/D encoding result=40 02:53:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:53:39 Set channel filter=0.000000e+000 result=40 02:53:39 Config A/D Result=40 02:53:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:53:39 Get A/D filter: -9.255963e+061 result=40 02:53:39 Get A/D value=-858993460 result=40 02:53:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:53:39 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:53:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:53:39 Aux= 02:53:39 Message to Camera, serial 50779 queued 02:54:15 Received message from Master: op=PointingHead serial=50791 02:54:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:54:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:54:15 Point started: ret=0 02:54:15 point_skyscan result=0 02:54:16 Check angles 02:54:16 SkyScan query 02:54:17 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.21<-23414 Statuses=0009 0009 02:54:17 Msec=0 True Az=113.01 Ze=-171.21 Az status=0009 Ze status=0009 02:54:17 Check angles 02:54:17 SkyScan query 02:54:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:54:17 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:54:17 Message to Master queued w/err=0: serial=50791 error=0 02:54:22 Received message from Master: op=Filter serial=50792 02:54:22 Color wheel filter change from 0 to 0 02:54:22 FLIGetFilterPos err=0 currentPosition=0 02:54:22 FLIGetStepsRemaining err=0 RemainingSteps=0 02:54:22 Filter is already there-color wheel unchanged 02:54:23 Received message from Master: op=Shutter serial=50793 02:54:23 Shutter LASER open 02:54:23 Received message from Camera: op=State serial=50795 02:54:23 GetSingleValue result=40 Value=cccccccc 02:54:23 SkyScan query 02:54:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:54:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:54:23 Parameters OK 02:54:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:54:23 Set A/D data flow result=40 02:54:23 Set A/D channel type result=40 02:54:23 Set A/D encoding result=40 02:54:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:54:23 Set channel filter=0.000000e+000 result=40 02:54:23 Config A/D Result=40 02:54:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:54:23 Get A/D filter: -9.255963e+061 result=40 02:54:23 Get A/D value=-858993460 result=40 02:54:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:54:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:54:23 Parameters OK 02:54:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:54:23 Set A/D data flow result=40 02:54:23 Set A/D channel type result=40 02:54:23 Set A/D encoding result=40 02:54:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:54:23 Set channel filter=0.000000e+000 result=40 02:54:23 Config A/D Result=40 02:54:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:54:23 Get A/D filter: -9.255963e+061 result=40 02:54:23 Get A/D value=-858993460 result=40 02:54:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:54:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:54:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:54:23 Aux= 02:54:23 Message to Camera, serial 50795 queued 02:54:32 Received message from Master: op=Shutter serial=50805 02:54:32 Shutter LASER close 02:54:32 Received message from Master: op=PointingHead serial=50809 02:54:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:54:32 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:54:33 Point started: ret=0 02:54:33 point_skyscan result=0 02:54:33 Check angles 02:54:33 SkyScan query 02:54:34 SkyScan query done: ret=0 az=136.14<-9076 ze=-143.07<-21538 Statuses=0009 0009 02:54:34 Msec=0 True Az=136.14 Ze=-143.07 Az status=0009 Ze status=0009 02:54:34 Check angles 02:54:34 SkyScan query 02:54:35 SkyScan query done: ret=0 az=154.095<-10273 ze=-121.275<-20085 Statuses=0009 0009 02:54:35 Msec=750 True Az=154.095 Ze=-121.275 Az status=0009 Ze status=0009 02:54:35 Check angles 02:54:35 SkyScan query 02:54:36 SkyScan query done: ret=0 az=171.75<-11450 ze=-100.215<-18681 Statuses=0009 0009 02:54:36 Msec=1500 True Az=171.75 Ze=-100.215 Az status=0009 Ze status=0009 02:54:36 Check angles 02:54:36 SkyScan query 02:54:36 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.305<-17287 Statuses=0008 0009 02:54:36 Msec=2250 True Az=176.025 Ze=-79.305 Az status=0008 Ze status=0009 02:54:36 Check angles 02:54:36 SkyScan query 02:54:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.335<-15889 Statuses=0008 0009 02:54:37 Msec=3000 True Az=176.01 Ze=-58.335 Az status=0008 Ze status=0009 02:54:37 Check angles 02:54:37 SkyScan query 02:54:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:54:38 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:54:38 Message to Master queued w/err=0: serial=50809 error=0 02:54:43 Received message from Master: op=Filter serial=50810 02:54:43 Color wheel filter change from 0 to 0 02:54:43 FLIGetFilterPos err=0 currentPosition=0 02:54:43 FLIGetStepsRemaining err=0 RemainingSteps=0 02:54:43 Filter is already there-color wheel unchanged 02:54:43 Received message from Master: op=Shutter serial=50811 02:54:43 Shutter LASER close 02:54:43 Received message from Camera: op=State serial=50813 02:54:43 GetSingleValue result=40 Value=cccccccc 02:54:43 SkyScan query 02:54:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:54:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:54:44 Parameters OK 02:54:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:54:44 Set A/D data flow result=40 02:54:44 Set A/D channel type result=40 02:54:44 Set A/D encoding result=40 02:54:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:54:44 Set channel filter=0.000000e+000 result=40 02:54:44 Config A/D Result=40 02:54:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:54:44 Get A/D filter: -9.255963e+061 result=40 02:54:44 Get A/D value=-858993460 result=40 02:54:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:54:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:54:44 Parameters OK 02:54:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:54:44 Set A/D data flow result=40 02:54:44 Set A/D channel type result=40 02:54:44 Set A/D encoding result=40 02:54:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:54:44 Set channel filter=0.000000e+000 result=40 02:54:44 Config A/D Result=40 02:54:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:54:44 Get A/D filter: -9.255963e+061 result=40 02:54:44 Get A/D value=-858993460 result=40 02:54:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:54:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:54:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:54:44 Aux= 02:54:44 Message to Camera, serial 50813 queued 02:55:20 Received message from Master: op=PointingHead serial=50826 02:55:20 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:55:20 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:55:21 Point started: ret=0 02:55:21 point_skyscan result=0 02:55:22 Check angles 02:55:22 SkyScan query 02:55:22 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.675<-13445 Statuses=0009 0009 02:55:22 Msec=0 True Az=152.94 Ze=-21.675 Az status=0009 Ze status=0009 02:55:22 Check angles 02:55:22 SkyScan query 02:55:23 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.255<-12017 Statuses=0009 0009 02:55:23 Msec=750 True Az=135.135 Ze=-0.255 Az status=0009 Ze status=0009 02:55:23 Check angles 02:55:23 SkyScan query 02:55:24 SkyScan query done: ret=0 az=117.06<-7804 ze=21.18<-10588 Statuses=0009 0009 02:55:24 Msec=1500 True Az=117.06 Ze=21.18 Az status=0009 Ze status=0009 02:55:24 Check angles 02:55:24 SkyScan query 02:55:24 SkyScan query done: ret=0 az=99.78<-6652 ze=42.075<-9195 Statuses=0009 0009 02:55:24 Msec=2250 True Az=99.78 Ze=42.075 Az status=0009 Ze status=0009 02:55:25 Check angles 02:55:25 SkyScan query 02:55:25 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 02:55:25 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 02:55:25 Check angles 02:55:25 SkyScan query 02:55:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:55:26 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 02:55:26 Message to Master queued w/err=0: serial=50826 error=0 02:55:31 Received message from Master: op=Filter serial=50827 02:55:31 Color wheel filter change from 0 to 0 02:55:31 FLIGetFilterPos err=0 currentPosition=0 02:55:31 FLIGetStepsRemaining err=0 RemainingSteps=0 02:55:31 Filter is already there-color wheel unchanged 02:55:31 Received message from Master: op=Shutter serial=50828 02:55:31 Shutter LASER close 02:55:31 Received message from Camera: op=State serial=50830 02:55:31 GetSingleValue result=40 Value=cccccccc [UTC 2018-12-11 02:55:31] 02:55:31 SkyScan query 02:55:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:55:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:55:32 Parameters OK 02:55:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:55:32 Set A/D data flow result=40 02:55:32 Set A/D channel type result=40 02:55:32 Set A/D encoding result=40 02:55:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:55:32 Set channel filter=0.000000e+000 result=40 02:55:32 Config A/D Result=40 02:55:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:55:32 Get A/D filter: -9.255963e+061 result=40 02:55:32 Get A/D value=-858993460 result=40 02:55:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:55:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:55:32 Parameters OK 02:55:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:55:32 Set A/D data flow result=40 02:55:32 Set A/D channel type result=40 02:55:32 Set A/D encoding result=40 02:55:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:55:32 Set channel filter=0.000000e+000 result=40 02:55:32 Config A/D Result=40 02:55:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:55:32 Get A/D filter: -9.255963e+061 result=40 02:55:32 Get A/D value=-858993460 result=40 02:55:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:55:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:55:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:55:32 Aux= 02:55:32 Message to Camera, serial 50830 queued [UTC 2018-12-11 02:55:54] 02:56:09 Received message from Master: op=PointingHead serial=50843 02:56:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:56:09 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:56:09 Point started: ret=0 02:56:09 point_skyscan result=0 02:56:10 Check angles 02:56:10 SkyScan query 02:56:10 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 02:56:10 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 02:56:11 Check angles 02:56:11 SkyScan query 02:56:11 SkyScan query done: ret=0 az=127.035<-8469 ze=38.505<-9433 Statuses=0009 0008 02:56:11 Msec=750 True Az=127.035 Ze=38.505 Az status=0009 Ze status=0008 02:56:11 Check angles 02:56:11 SkyScan query 02:56:12 SkyScan query done: ret=0 az=144.465<-9631 ze=38.505<-9433 Statuses=0009 0008 02:56:12 Msec=1500 True Az=144.465 Ze=38.505 Az status=0009 Ze status=0008 02:56:12 Check angles 02:56:12 SkyScan query 02:56:13 SkyScan query done: ret=0 az=162<-10800 ze=38.505<-9433 Statuses=0009 0008 02:56:13 Msec=2250 True Az=162 Ze=38.505 Az status=0009 Ze status=0008 02:56:13 Check angles 02:56:13 SkyScan query 02:56:13 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 02:56:13 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 02:56:14 Check angles 02:56:14 SkyScan query 02:56:14 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 02:56:14 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 02:56:14 Message to Master queued w/err=0: serial=50843 error=0 02:56:19 Received message from Master: op=Filter serial=50844 02:56:19 Color wheel filter change from 0 to 0 02:56:19 FLIGetFilterPos err=0 currentPosition=0 02:56:19 FLIGetStepsRemaining err=0 RemainingSteps=0 02:56:19 Filter is already there-color wheel unchanged 02:56:19 Received message from Master: op=Shutter serial=50845 02:56:19 Shutter LASER close 02:56:19 Received message from Camera: op=State serial=50847 02:56:19 GetSingleValue result=40 Value=cccccccc 02:56:19 SkyScan query 02:56:20 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:56:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:56:20 Parameters OK 02:56:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:56:20 Set A/D data flow result=40 02:56:20 Set A/D channel type result=40 02:56:20 Set A/D encoding result=40 02:56:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:56:20 Set channel filter=0.000000e+000 result=40 02:56:20 Config A/D Result=40 02:56:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:56:20 Get A/D filter: -9.255963e+061 result=40 02:56:20 Get A/D value=-858993460 result=40 02:56:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:56:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:56:20 Parameters OK 02:56:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:56:20 Set A/D data flow result=40 02:56:20 Set A/D channel type result=40 02:56:20 Set A/D encoding result=40 02:56:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:56:20 Set channel filter=0.000000e+000 result=40 02:56:20 Config A/D Result=40 02:56:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:56:20 Get A/D filter: -9.255963e+061 result=40 02:56:20 Get A/D value=-858993460 result=40 02:56:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:56:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:56:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:56:20 Aux= 02:56:20 Message to Camera, serial 50847 queued 02:56:57 Received message from Master: op=PointingHead serial=50860 02:56:57 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:56:57 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:56:57 Point started: ret=0 02:56:57 point_skyscan result=0 02:56:58 Check angles 02:56:58 SkyScan query 02:56:58 SkyScan query done: ret=0 az=153.12<-10208 ze=8.79<-11414 Statuses=0009 0009 02:56:58 Msec=0 True Az=153.12 Ze=8.79 Az status=0009 Ze status=0009 02:56:59 Check angles 02:56:59 SkyScan query 02:56:59 SkyScan query done: ret=0 az=135.705<-9047 ze=-12.18<-12812 Statuses=0009 0009 02:56:59 Msec=750 True Az=135.705 Ze=-12.18 Az status=0009 Ze status=0009 02:56:59 Check angles 02:56:59 SkyScan query 02:57:00 SkyScan query done: ret=0 az=118.08<-7872 ze=-33.09<-14206 Statuses=0009 0009 02:57:00 Msec=1500 True Az=118.08 Ze=-33.09 Az status=0009 Ze status=0009 02:57:00 Check angles 02:57:00 SkyScan query 02:57:01 SkyScan query done: ret=0 az=100.74<-6716 ze=-51.525<-15435 Statuses=0009 0009 02:57:01 Msec=2250 True Az=100.74 Ze=-51.525 Az status=0009 Ze status=0009 02:57:01 Check angles 02:57:01 SkyScan query 02:57:01 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 02:57:01 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 02:57:02 Check angles 02:57:02 SkyScan query 02:57:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:57:02 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:57:02 Message to Master queued w/err=0: serial=50860 error=0 02:57:07 Received message from Master: op=Filter serial=50861 02:57:07 Color wheel filter change from 0 to 0 02:57:07 FLIGetFilterPos err=0 currentPosition=0 02:57:07 FLIGetStepsRemaining err=0 RemainingSteps=0 02:57:07 Filter is already there-color wheel unchanged 02:57:07 Received message from Master: op=Shutter serial=50862 02:57:07 Shutter LASER close 02:57:07 Received message from Camera: op=State serial=50864 02:57:07 GetSingleValue result=40 Value=cccccccc 02:57:07 SkyScan query 02:57:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:57:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:57:08 Parameters OK 02:57:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:57:08 Set A/D data flow result=40 02:57:08 Set A/D channel type result=40 02:57:08 Set A/D encoding result=40 02:57:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:57:08 Set channel filter=0.000000e+000 result=40 02:57:08 Config A/D Result=40 02:57:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:57:08 Get A/D filter: -9.255963e+061 result=40 02:57:08 Get A/D value=-858993460 result=40 02:57:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:57:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:57:08 Parameters OK 02:57:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:57:08 Set A/D data flow result=40 02:57:08 Set A/D channel type result=40 02:57:08 Set A/D encoding result=40 02:57:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:57:08 Set channel filter=0.000000e+000 result=40 02:57:08 Config A/D Result=40 02:57:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:57:08 Get A/D filter: -9.255963e+061 result=40 02:57:08 Get A/D value=-858993460 result=40 02:57:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:57:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:57:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:57:08 Aux= 02:57:08 Message to Camera, serial 50864 queued 02:57:45 Received message from Master: op=PointingHead serial=50877 02:57:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:57:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:57:45 Point started: ret=0 02:57:45 point_skyscan result=0 02:57:46 Check angles 02:57:46 SkyScan query 02:57:46 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.48<-17432 Statuses=0009 0009 02:57:46 Msec=0 True Az=109.185 Ze=-81.48 Az status=0009 Ze status=0009 02:57:47 Check angles 02:57:47 SkyScan query 02:57:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.9<-18860 Statuses=0008 0009 02:57:47 Msec=750 True Az=112.995 Ze=-102.9 Az status=0008 Ze status=0009 02:57:47 Check angles 02:57:47 SkyScan query 02:57:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.29<-20286 Statuses=0008 0009 02:57:48 Msec=1500 True Az=112.995 Ze=-124.29 Az status=0008 Ze status=0009 02:57:48 Check angles 02:57:48 SkyScan query 02:57:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.23<-21682 Statuses=0008 0009 02:57:49 Msec=2250 True Az=112.995 Ze=-145.23 Az status=0008 Ze status=0009 02:57:49 Check angles 02:57:49 SkyScan query 02:57:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.155<-23077 Statuses=0008 0009 02:57:50 Msec=3000 True Az=112.995 Ze=-166.155 Az status=0008 Ze status=0009 02:57:50 Check angles 02:57:50 SkyScan query 02:57:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:57:50 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:57:50 Message to Master queued w/err=0: serial=50877 error=0 02:57:55 Received message from Master: op=Filter serial=50878 02:57:55 Color wheel filter change from 0 to 0 02:57:55 FLIGetFilterPos err=0 currentPosition=0 02:57:55 FLIGetStepsRemaining err=0 RemainingSteps=0 02:57:55 Filter is already there-color wheel unchanged 02:57:55 Received message from Master: op=Shutter serial=50879 02:57:55 Shutter LASER open 02:57:56 Received message from Camera: op=State serial=50881 02:57:56 GetSingleValue result=40 Value=cccccccc 02:57:56 SkyScan query 02:57:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:57:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:57:56 Parameters OK 02:57:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:57:56 Set A/D data flow result=40 02:57:56 Set A/D channel type result=40 02:57:56 Set A/D encoding result=40 02:57:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:57:56 Set channel filter=0.000000e+000 result=40 02:57:56 Config A/D Result=40 02:57:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:57:56 Get A/D filter: -9.255963e+061 result=40 02:57:56 Get A/D value=-858993460 result=40 02:57:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:57:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:57:56 Parameters OK 02:57:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:57:56 Set A/D data flow result=40 02:57:56 Set A/D channel type result=40 02:57:56 Set A/D encoding result=40 02:57:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:57:56 Set channel filter=0.000000e+000 result=40 02:57:56 Config A/D Result=40 02:57:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:57:56 Get A/D filter: -9.255963e+061 result=40 02:57:56 Get A/D value=-858993460 result=40 02:57:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:57:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:57:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:57:56 Aux= 02:57:56 Message to Camera, serial 50881 queued 02:58:05 Received message from Master: op=Shutter serial=50891 02:58:05 Shutter LASER close 02:58:05 Received message from Master: op=PointingHead serial=50895 02:58:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:58:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:58:05 Point started: ret=0 02:58:05 point_skyscan result=0 02:58:06 Check angles 02:58:06 SkyScan query 02:58:07 SkyScan query done: ret=0 az=89.85<-5990 ze=157.29<-1514 Statuses=0009 0009 02:58:07 Msec=0 True Az=89.85 Ze=157.29 Az status=0009 Ze status=0009 02:58:07 Check angles 02:58:07 SkyScan query 02:58:07 SkyScan query done: ret=0 az=71.955<-4797 ze=135.705<-2953 Statuses=0009 0009 02:58:07 Msec=750 True Az=71.955 Ze=135.705 Az status=0009 Ze status=0009 02:58:08 Check angles 02:58:08 SkyScan query 02:58:08 SkyScan query done: ret=0 az=54.72<-3648 ze=114.915<-4339 Statuses=0009 0009 02:58:08 Msec=1500 True Az=54.72 Ze=114.915 Az status=0009 Ze status=0009 02:58:08 Check angles 02:58:08 SkyScan query 02:58:09 SkyScan query done: ret=0 az=40.905<-2727 ze=93.945<-5737 Statuses=0009 0009 02:58:09 Msec=2250 True Az=40.905 Ze=93.945 Az status=0009 Ze status=0009 02:58:09 Check angles 02:58:09 SkyScan query 02:58:10 SkyScan query done: ret=0 az=40.995<-2733 ze=72.54<-7164 Statuses=0008 0009 02:58:10 Msec=3000 True Az=40.995 Ze=72.54 Az status=0008 Ze status=0009 02:58:10 Check angles 02:58:10 SkyScan query 02:58:11 SkyScan query done: ret=0 az=40.995<-2733 ze=52.11<-8526 Statuses=0008 0009 02:58:11 Msec=3750 True Az=40.995 Ze=52.11 Az status=0008 Ze status=0009 02:58:11 Check angles 02:58:11 SkyScan query 02:58:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:58:11 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:58:11 Message to Master queued w/err=0: serial=50895 error=0 02:58:16 Received message from Master: op=Filter serial=50896 02:58:16 Color wheel filter change from 0 to 0 02:58:16 FLIGetFilterPos err=0 currentPosition=0 02:58:16 FLIGetStepsRemaining err=0 RemainingSteps=0 02:58:16 Filter is already there-color wheel unchanged 02:58:16 Received message from Master: op=Shutter serial=50897 02:58:16 Shutter LASER close 02:58:17 Received message from Camera: op=State serial=50899 02:58:17 GetSingleValue result=40 Value=cccccccc 02:58:17 SkyScan query 02:58:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:58:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:58:17 Parameters OK 02:58:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:58:17 Set A/D data flow result=40 02:58:17 Set A/D channel type result=40 02:58:17 Set A/D encoding result=40 02:58:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:58:17 Set channel filter=0.000000e+000 result=40 02:58:17 Config A/D Result=40 02:58:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:58:17 Get A/D filter: -9.255963e+061 result=40 02:58:17 Get A/D value=-858993460 result=40 02:58:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:58:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:58:17 Parameters OK 02:58:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:58:17 Set A/D data flow result=40 02:58:17 Set A/D channel type result=40 02:58:17 Set A/D encoding result=40 02:58:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:58:17 Set channel filter=0.000000e+000 result=40 02:58:17 Config A/D Result=40 02:58:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:58:17 Get A/D filter: -9.255963e+061 result=40 02:58:17 Get A/D value=-858993460 result=40 02:58:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:58:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:58:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:58:17 Aux= 02:58:17 Message to Camera, serial 50899 queued 02:58:54 Received message from Master: op=PointingHead serial=50912 02:58:54 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 02:58:54 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 02:58:54 Point started: ret=0 02:58:54 point_skyscan result=0 02:58:55 Check angles 02:58:55 SkyScan query 02:58:56 SkyScan query done: ret=0 az=63.72<-4248 ze=66.555<-7563 Statuses=0009 0008 02:58:56 Msec=0 True Az=63.72 Ze=66.555 Az status=0009 Ze status=0008 02:58:56 Check angles 02:58:56 SkyScan query 02:58:56 SkyScan query done: ret=0 az=81.525<-5435 ze=66.495<-7567 Statuses=0009 0008 02:58:56 Msec=750 True Az=81.525 Ze=66.495 Az status=0009 Ze status=0008 02:58:57 Check angles 02:58:57 SkyScan query 02:58:57 SkyScan query done: ret=0 az=99.6<-6640 ze=66.495<-7567 Statuses=0009 0008 02:58:57 Msec=1500 True Az=99.6 Ze=66.495 Az status=0009 Ze status=0008 02:58:57 Check angles 02:58:57 SkyScan query 02:58:58 SkyScan query done: ret=0 az=117.03<-7802 ze=66.495<-7567 Statuses=0009 0008 02:58:58 Msec=2250 True Az=117.03 Ze=66.495 Az status=0009 Ze status=0008 02:58:58 Check angles 02:58:58 SkyScan query 02:58:59 SkyScan query done: ret=0 az=134.46<-8964 ze=66.495<-7567 Statuses=0009 0008 02:58:59 Msec=3000 True Az=134.46 Ze=66.495 Az status=0009 Ze status=0008 02:58:59 Check angles 02:58:59 SkyScan query 02:58:59 SkyScan query done: ret=0 az=151.92<-10128 ze=66.495<-7567 Statuses=0009 0008 02:58:59 Msec=3750 True Az=151.92 Ze=66.495 Az status=0009 Ze status=0008 02:59:00 Check angles 02:59:00 SkyScan query 02:59:00 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:59:00 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 02:59:00 Message to Master queued w/err=0: serial=50912 error=0 02:59:05 Received message from Master: op=Filter serial=50913 02:59:05 Color wheel filter change from 0 to 0 02:59:05 FLIGetFilterPos err=0 currentPosition=0 02:59:05 FLIGetStepsRemaining err=0 RemainingSteps=0 02:59:05 Filter is already there-color wheel unchanged 02:59:05 Received message from Master: op=Shutter serial=50914 02:59:05 Shutter LASER close 02:59:05 Received message from Camera: op=State serial=50916 02:59:05 GetSingleValue result=40 Value=cccccccc 02:59:05 SkyScan query 02:59:06 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:59:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:59:06 Parameters OK 02:59:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:59:06 Set A/D data flow result=40 02:59:06 Set A/D channel type result=40 02:59:06 Set A/D encoding result=40 02:59:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:59:06 Set channel filter=0.000000e+000 result=40 02:59:06 Config A/D Result=40 02:59:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:59:06 Get A/D filter: -9.255963e+061 result=40 02:59:06 Get A/D value=-858993460 result=40 02:59:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:59:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:59:06 Parameters OK 02:59:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:59:06 Set A/D data flow result=40 02:59:06 Set A/D channel type result=40 02:59:06 Set A/D encoding result=40 02:59:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:59:06 Set channel filter=0.000000e+000 result=40 02:59:06 Config A/D Result=40 02:59:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:59:06 Get A/D filter: -9.255963e+061 result=40 02:59:06 Get A/D value=-858993460 result=40 02:59:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:59:06 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:59:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:59:06 Aux= 02:59:06 Message to Camera, serial 50916 queued 02:59:43 Received message from Master: op=PointingHead serial=50929 02:59:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:59:43 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:59:43 Point started: ret=0 02:59:43 point_skyscan result=0 02:59:44 Check angles 02:59:44 SkyScan query 02:59:45 SkyScan query done: ret=0 az=134.76<-8984 ze=36.435<-9571 Statuses=0009 0009 02:59:45 Msec=0 True Az=134.76 Ze=36.435 Az status=0009 Ze status=0009 02:59:45 Check angles 02:59:45 SkyScan query 02:59:45 SkyScan query done: ret=0 az=117.285<-7819 ze=15.51<-10966 Statuses=0009 0009 02:59:45 Msec=750 True Az=117.285 Ze=15.51 Az status=0009 Ze status=0009 02:59:45 Check angles 02:59:45 SkyScan query 02:59:46 SkyScan query done: ret=0 az=99.885<-6659 ze=-5.475<-12365 Statuses=0009 0009 02:59:46 Msec=1500 True Az=99.885 Ze=-5.475 Az status=0009 Ze status=0009 02:59:46 Check angles 02:59:46 SkyScan query 02:59:47 SkyScan query done: ret=0 az=82.365<-5491 ze=-26.445<-13763 Statuses=0009 0009 02:59:47 Msec=2250 True Az=82.365 Ze=-26.445 Az status=0009 Ze status=0009 02:59:47 Check angles 02:59:47 SkyScan query 02:59:48 SkyScan query done: ret=0 az=64.815<-4321 ze=-38.565<-14571 Statuses=0009 0008 02:59:48 Msec=3000 True Az=64.815 Ze=-38.565 Az status=0009 Ze status=0008 02:59:48 Check angles 02:59:48 SkyScan query 02:59:48 SkyScan query done: ret=0 az=47.43<-3162 ze=-38.535<-14569 Statuses=0009 0008 02:59:48 Msec=3750 True Az=47.43 Ze=-38.535 Az status=0009 Ze status=0008 02:59:48 Check angles 02:59:48 SkyScan query 02:59:49 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 02:59:49 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 02:59:49 Message to Master queued w/err=0: serial=50929 error=0 02:59:54 Received message from Master: op=Filter serial=50930 02:59:54 Color wheel filter change from 0 to 0 02:59:54 FLIGetFilterPos err=0 currentPosition=0 02:59:54 FLIGetStepsRemaining err=0 RemainingSteps=0 02:59:54 Filter is already there-color wheel unchanged 02:59:54 Received message from Master: op=Shutter serial=50931 02:59:54 Shutter LASER close 02:59:54 Received message from Camera: op=State serial=50933 02:59:54 GetSingleValue result=40 Value=cccccccc 02:59:54 SkyScan query 02:59:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:59:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:59:55 Parameters OK 02:59:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:59:55 Set A/D data flow result=40 02:59:55 Set A/D channel type result=40 02:59:55 Set A/D encoding result=40 02:59:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:59:55 Set channel filter=0.000000e+000 result=40 02:59:55 Config A/D Result=40 02:59:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:59:55 Get A/D filter: -9.255963e+061 result=40 02:59:55 Get A/D value=-858993460 result=40 02:59:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:59:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:59:55 Parameters OK 02:59:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:59:55 Set A/D data flow result=40 02:59:55 Set A/D channel type result=40 02:59:55 Set A/D encoding result=40 02:59:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:59:55 Set channel filter=0.000000e+000 result=40 02:59:55 Config A/D Result=40 02:59:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:59:55 Get A/D filter: -9.255963e+061 result=40 02:59:55 Get A/D value=-858993460 result=40 02:59:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:59:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:59:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:59:55 Aux= 02:59:55 Message to Camera, serial 50933 queued 03:00:32 Received message from Master: op=PointingHead serial=50946 03:00:32 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:00:32 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:00:32 Point started: ret=0 03:00:32 point_skyscan result=0 03:00:33 Check angles 03:00:33 SkyScan query 03:00:33 SkyScan query done: ret=0 az=63.75<-4250 ze=-68.1<-16540 Statuses=0009 0009 03:00:33 Msec=0 True Az=63.75 Ze=-68.1 Az status=0009 Ze status=0009 03:00:33 Check angles 03:00:33 SkyScan query 03:00:34 SkyScan query done: ret=0 az=81.3<-5420 ze=-89.1<-17940 Statuses=0009 0009 03:00:34 Msec=750 True Az=81.3 Ze=-89.1 Az status=0009 Ze status=0009 03:00:34 Check angles 03:00:34 SkyScan query 03:00:35 SkyScan query done: ret=0 az=98.835<-6589 ze=-110.025<-19335 Statuses=0009 0009 03:00:35 Msec=1500 True Az=98.835 Ze=-110.025 Az status=0009 Ze status=0009 03:00:35 Check angles 03:00:35 SkyScan query 03:00:36 SkyScan query done: ret=0 az=116.235<-7749 ze=-131.01<-20734 Statuses=0009 0009 03:00:36 Msec=2250 True Az=116.235 Ze=-131.01 Az status=0009 Ze status=0009 03:00:36 Check angles 03:00:36 SkyScan query 03:00:36 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 03:00:36 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 03:00:36 Check angles 03:00:36 SkyScan query 03:00:37 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:00:37 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:00:37 Message to Master queued w/err=0: serial=50946 error=0 03:00:42 Received message from Master: op=Filter serial=50947 03:00:42 Color wheel filter change from 0 to 0 03:00:42 FLIGetFilterPos err=0 currentPosition=0 03:00:42 FLIGetStepsRemaining err=0 RemainingSteps=0 03:00:42 Filter is already there-color wheel unchanged 03:00:42 Received message from Master: op=Shutter serial=50948 03:00:42 Shutter LASER close 03:00:42 Received message from Camera: op=State serial=50950 03:00:42 GetSingleValue result=40 Value=cccccccc 03:00:42 SkyScan query 03:00:43 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:00:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:00:43 Parameters OK 03:00:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:00:43 Set A/D data flow result=40 03:00:43 Set A/D channel type result=40 03:00:43 Set A/D encoding result=40 03:00:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:00:43 Set channel filter=0.000000e+000 result=40 03:00:43 Config A/D Result=40 03:00:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:00:43 Get A/D filter: -9.255963e+061 result=40 03:00:43 Get A/D value=-858993460 result=40 03:00:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:00:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:00:43 Parameters OK 03:00:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:00:43 Set A/D data flow result=40 03:00:43 Set A/D channel type result=40 03:00:43 Set A/D encoding result=40 03:00:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:00:43 Set channel filter=0.000000e+000 result=40 03:00:43 Config A/D Result=40 03:00:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:00:43 Get A/D filter: -9.255963e+061 result=40 03:00:43 Get A/D value=-858993460 result=40 03:00:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:00:43 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:00:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:00:43 Aux= 03:00:43 Message to Camera, serial 50950 queued 03:01:20 Received message from Master: op=PointingHead serial=50963 03:01:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:01:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:01:20 Point started: ret=0 03:01:20 point_skyscan result=0 03:01:21 Check angles 03:01:21 SkyScan query 03:01:21 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.91<-23394 Statuses=0009 0009 03:01:21 Msec=0 True Az=113.01 Ze=-170.91 Az status=0009 Ze status=0009 03:01:22 Check angles 03:01:22 SkyScan query 03:01:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:01:22 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:01:22 Message to Master queued w/err=0: serial=50963 error=0 03:01:27 Received message from Master: op=Filter serial=50964 03:01:27 Color wheel filter change from 0 to 0 03:01:27 FLIGetFilterPos err=0 currentPosition=0 03:01:27 FLIGetStepsRemaining err=0 RemainingSteps=0 03:01:27 Filter is already there-color wheel unchanged 03:01:27 Received message from Master: op=Shutter serial=50965 03:01:27 Shutter LASER open 03:01:28 Received message from Camera: op=State serial=50967 03:01:28 GetSingleValue result=40 Value=cccccccc 03:01:28 SkyScan query 03:01:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:01:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:01:28 Parameters OK 03:01:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:01:28 Set A/D data flow result=40 03:01:28 Set A/D channel type result=40 03:01:28 Set A/D encoding result=40 03:01:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:01:28 Set channel filter=0.000000e+000 result=40 03:01:28 Config A/D Result=40 03:01:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:01:28 Get A/D filter: -9.255963e+061 result=40 03:01:28 Get A/D value=-858993460 result=40 03:01:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:01:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:01:28 Parameters OK 03:01:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:01:28 Set A/D data flow result=40 03:01:28 Set A/D channel type result=40 03:01:28 Set A/D encoding result=40 03:01:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:01:28 Set channel filter=0.000000e+000 result=40 03:01:28 Config A/D Result=40 03:01:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:01:28 Get A/D filter: -9.255963e+061 result=40 03:01:28 Get A/D value=-858993460 result=40 03:01:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:01:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:01:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:01:28 Aux= 03:01:28 Message to Camera, serial 50967 queued 03:01:37 Received message from Master: op=Shutter serial=50977 03:01:37 Shutter LASER close 03:01:37 Received message from Master: op=PointingHead serial=50981 03:01:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:01:37 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:01:37 Point started: ret=0 03:01:37 point_skyscan result=0 03:01:38 Check angles 03:01:38 SkyScan query 03:01:39 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.535<-21569 Statuses=0009 0009 03:01:39 Msec=0 True Az=135.825 Ze=-143.535 Az status=0009 Ze status=0009 03:01:39 Check angles 03:01:39 SkyScan query 03:01:40 SkyScan query done: ret=0 az=153.165<-10211 ze=-122.58<-20172 Statuses=0009 0009 03:01:40 Msec=750 True Az=153.165 Ze=-122.58 Az status=0009 Ze status=0009 03:01:40 Check angles 03:01:40 SkyScan query 03:01:40 SkyScan query done: ret=0 az=170.73<-11382 ze=-101.685<-18779 Statuses=0009 0009 03:01:40 Msec=1500 True Az=170.73 Ze=-101.685 Az status=0009 Ze status=0009 03:01:40 Check angles 03:01:40 SkyScan query 03:01:41 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.625<-17375 Statuses=0008 0009 03:01:41 Msec=2250 True Az=176.025 Ze=-80.625 Az status=0008 Ze status=0009 03:01:41 Check angles 03:01:41 SkyScan query 03:01:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.295<-15953 Statuses=0008 0009 03:01:42 Msec=3000 True Az=175.995 Ze=-59.295 Az status=0008 Ze status=0009 03:01:42 Check angles 03:01:42 SkyScan query 03:01:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:01:43 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:01:43 Message to Master queued w/err=0: serial=50981 error=0 03:01:48 Received message from Master: op=Filter serial=50982 03:01:48 Color wheel filter change from 0 to 0 03:01:48 FLIGetFilterPos err=0 currentPosition=0 03:01:48 FLIGetStepsRemaining err=0 RemainingSteps=0 03:01:48 Filter is already there-color wheel unchanged 03:01:48 Received message from Master: op=Shutter serial=50983 03:01:48 Shutter LASER close 03:01:48 Received message from Camera: op=State serial=50985 03:01:48 GetSingleValue result=40 Value=cccccccc 03:01:48 SkyScan query 03:01:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:01:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:01:48 Parameters OK 03:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:01:48 Set A/D data flow result=40 03:01:48 Set A/D channel type result=40 03:01:48 Set A/D encoding result=40 03:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:01:48 Set channel filter=0.000000e+000 result=40 03:01:48 Config A/D Result=40 03:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:01:48 Get A/D filter: -9.255963e+061 result=40 03:01:48 Get A/D value=-858993460 result=40 03:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:01:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:01:48 Parameters OK 03:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:01:48 Set A/D data flow result=40 03:01:48 Set A/D channel type result=40 03:01:48 Set A/D encoding result=40 03:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:01:48 Set channel filter=0.000000e+000 result=40 03:01:48 Config A/D Result=40 03:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:01:48 Get A/D filter: -9.255963e+061 result=40 03:01:48 Get A/D value=-858993460 result=40 03:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:01:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:01:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:01:48 Aux= 03:01:48 Message to Camera, serial 50985 queued 03:02:25 Received message from Master: op=PointingHead serial=50998 03:02:25 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:02:25 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:02:26 Point started: ret=0 03:02:26 point_skyscan result=0 03:02:26 Check angles 03:02:26 SkyScan query 03:02:27 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.735<-13449 Statuses=0009 0009 03:02:27 Msec=0 True Az=152.985 Ze=-21.735 Az status=0009 Ze status=0009 03:02:27 Check angles 03:02:27 SkyScan query 03:02:28 SkyScan query done: ret=0 az=135.195<-9013 ze=-0.3<-12020 Statuses=0009 0009 03:02:28 Msec=750 True Az=135.195 Ze=-0.3 Az status=0009 Ze status=0009 03:02:28 Check angles 03:02:28 SkyScan query 03:02:28 SkyScan query done: ret=0 az=117.57<-7838 ze=20.7<-10620 Statuses=0009 0009 03:02:28 Msec=1500 True Az=117.57 Ze=20.7 Az status=0009 Ze status=0009 03:02:29 Check angles 03:02:29 SkyScan query 03:02:29 SkyScan query done: ret=0 az=100.2<-6680 ze=41.61<-9226 Statuses=0009 0009 03:02:29 Msec=2250 True Az=100.2 Ze=41.61 Az status=0009 Ze status=0009 03:02:29 Check angles 03:02:29 SkyScan query 03:02:30 SkyScan query done: ret=0 az=86.04<-5736 ze=51.555<-8563 Statuses=0009 0008 03:02:30 Msec=3000 True Az=86.04 Ze=51.555 Az status=0009 Ze status=0008 03:02:30 Check angles 03:02:30 SkyScan query 03:02:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:02:31 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:02:31 Message to Master queued w/err=0: serial=50998 error=0 03:02:36 Received message from Master: op=Filter serial=50999 03:02:36 Color wheel filter change from 0 to 0 03:02:36 FLIGetFilterPos err=0 currentPosition=0 03:02:36 FLIGetStepsRemaining err=0 RemainingSteps=0 03:02:36 Filter is already there-color wheel unchanged 03:02:36 Received message from Master: op=Shutter serial=51000 03:02:36 Shutter LASER close 03:02:36 Received message from Camera: op=State serial=51002 03:02:36 GetSingleValue result=40 Value=cccccccc 03:02:36 SkyScan query 03:02:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:02:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:02:37 Parameters OK 03:02:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:02:37 Set A/D data flow result=40 03:02:37 Set A/D channel type result=40 03:02:37 Set A/D encoding result=40 03:02:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:02:37 Set channel filter=0.000000e+000 result=40 03:02:37 Config A/D Result=40 03:02:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:02:37 Get A/D filter: -9.255963e+061 result=40 03:02:37 Get A/D value=-858993460 result=40 03:02:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:02:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:02:37 Parameters OK 03:02:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:02:37 Set A/D data flow result=40 03:02:37 Set A/D channel type result=40 03:02:37 Set A/D encoding result=40 03:02:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:02:37 Set channel filter=0.000000e+000 result=40 03:02:37 Config A/D Result=40 03:02:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:02:37 Get A/D filter: -9.255963e+061 result=40 03:02:37 Get A/D value=-858993460 result=40 03:02:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:02:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:02:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:02:37 Aux= 03:02:37 Message to Camera, serial 51002 queued 03:03:13 Received message from Master: op=PointingHead serial=51015 03:03:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:03:13 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:03:14 Point started: ret=0 03:03:14 point_skyscan result=0 03:03:14 Check angles 03:03:14 SkyScan query 03:03:15 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 03:03:15 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 03:03:15 Check angles 03:03:15 SkyScan query 03:03:16 SkyScan query done: ret=0 az=126.375<-8425 ze=38.505<-9433 Statuses=0009 0008 03:03:16 Msec=750 True Az=126.375 Ze=38.505 Az status=0009 Ze status=0008 03:03:16 Check angles 03:03:16 SkyScan query 03:03:17 SkyScan query done: ret=0 az=143.835<-9589 ze=38.505<-9433 Statuses=0009 0008 03:03:17 Msec=1500 True Az=143.835 Ze=38.505 Az status=0009 Ze status=0008 03:03:17 Check angles 03:03:17 SkyScan query 03:03:17 SkyScan query done: ret=0 az=161.145<-10743 ze=38.505<-9433 Statuses=0009 0008 03:03:17 Msec=2250 True Az=161.145 Ze=38.505 Az status=0009 Ze status=0008 03:03:17 Check angles 03:03:17 SkyScan query 03:03:18 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 03:03:18 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 03:03:18 Check angles 03:03:18 SkyScan query 03:03:19 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:03:19 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:03:19 Message to Master queued w/err=0: serial=51015 error=0 03:03:24 Received message from Master: op=Filter serial=51016 03:03:24 Color wheel filter change from 0 to 0 03:03:24 FLIGetFilterPos err=0 currentPosition=0 03:03:24 FLIGetStepsRemaining err=0 RemainingSteps=0 03:03:24 Filter is already there-color wheel unchanged 03:03:24 Received message from Master: op=Shutter serial=51017 03:03:24 Shutter LASER close 03:03:24 Received message from Camera: op=State serial=51019 03:03:24 GetSingleValue result=40 Value=cccccccc 03:03:24 SkyScan query 03:03:25 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:03:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:03:25 Parameters OK 03:03:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:03:25 Set A/D data flow result=40 03:03:25 Set A/D channel type result=40 03:03:25 Set A/D encoding result=40 03:03:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:03:25 Set channel filter=0.000000e+000 result=40 03:03:25 Config A/D Result=40 03:03:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:03:25 Get A/D filter: -9.255963e+061 result=40 03:03:25 Get A/D value=-858993460 result=40 03:03:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:03:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:03:25 Parameters OK 03:03:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:03:25 Set A/D data flow result=40 03:03:25 Set A/D channel type result=40 03:03:25 Set A/D encoding result=40 03:03:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:03:25 Set channel filter=0.000000e+000 result=40 03:03:25 Config A/D Result=40 03:03:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:03:25 Get A/D filter: -9.255963e+061 result=40 03:03:25 Get A/D value=-858993460 result=40 03:03:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:03:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:03:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:03:25 Aux= 03:03:25 Message to Camera, serial 51019 queued 03:04:01 Received message from Master: op=PointingHead serial=51032 03:04:01 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:04:01 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:04:02 Point started: ret=0 03:04:02 point_skyscan result=0 03:04:03 Check angles 03:04:03 SkyScan query 03:04:03 SkyScan query done: ret=0 az=152.685<-10179 ze=8.25<-11450 Statuses=0009 0009 03:04:03 Msec=0 True Az=152.685 Ze=8.25 Az status=0009 Ze status=0009 03:04:03 Check angles 03:04:03 SkyScan query 03:04:04 SkyScan query done: ret=0 az=135.18<-9012 ze=-12.645<-12843 Statuses=0009 0009 03:04:04 Msec=750 True Az=135.18 Ze=-12.645 Az status=0009 Ze status=0009 03:04:04 Check angles 03:04:04 SkyScan query 03:04:05 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.615<-14241 Statuses=0009 0009 03:04:05 Msec=1500 True Az=117.57 Ze=-33.615 Az status=0009 Ze status=0009 03:04:05 Check angles 03:04:05 SkyScan query 03:04:05 SkyScan query done: ret=0 az=99.975<-6665 ze=-51.57<-15438 Statuses=0009 0009 03:04:05 Msec=2250 True Az=99.975 Ze=-51.57 Az status=0009 Ze status=0009 03:04:06 Check angles 03:04:06 SkyScan query 03:04:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 03:04:06 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 03:04:06 Check angles 03:04:06 SkyScan query 03:04:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:04:07 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:04:07 Message to Master queued w/err=0: serial=51032 error=0 03:04:12 Received message from Master: op=Filter serial=51033 03:04:12 Color wheel filter change from 0 to 0 03:04:12 FLIGetFilterPos err=0 currentPosition=0 03:04:12 FLIGetStepsRemaining err=0 RemainingSteps=0 03:04:12 Filter is already there-color wheel unchanged 03:04:12 Received message from Master: op=Shutter serial=51034 03:04:12 Shutter LASER close 03:04:12 Received message from Camera: op=State serial=51036 03:04:12 GetSingleValue result=40 Value=cccccccc 03:04:12 SkyScan query 03:04:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:04:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:04:13 Parameters OK 03:04:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:04:13 Set A/D data flow result=40 03:04:13 Set A/D channel type result=40 03:04:13 Set A/D encoding result=40 03:04:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:04:13 Set channel filter=0.000000e+000 result=40 03:04:13 Config A/D Result=40 03:04:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:04:13 Get A/D filter: -9.255963e+061 result=40 03:04:13 Get A/D value=-858993460 result=40 03:04:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:04:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:04:13 Parameters OK 03:04:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:04:13 Set A/D data flow result=40 03:04:13 Set A/D channel type result=40 03:04:13 Set A/D encoding result=40 03:04:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:04:13 Set channel filter=0.000000e+000 result=40 03:04:13 Config A/D Result=40 03:04:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:04:13 Get A/D filter: -9.255963e+061 result=40 03:04:13 Get A/D value=-858993460 result=40 03:04:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:04:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:04:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:04:13 Aux= 03:04:13 Message to Camera, serial 51036 queued 03:04:50 Received message from Master: op=PointingHead serial=51049 03:04:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:04:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:04:50 Point started: ret=0 03:04:50 point_skyscan result=0 03:04:51 Check angles 03:04:51 SkyScan query 03:04:51 SkyScan query done: ret=0 az=109.275<-7285 ze=-81.705<-17447 Statuses=0009 0009 03:04:51 Msec=0 True Az=109.275 Ze=-81.705 Az status=0009 Ze status=0009 03:04:51 Check angles 03:04:51 SkyScan query 03:04:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.645<-18843 Statuses=0008 0009 03:04:52 Msec=750 True Az=112.995 Ze=-102.645 Az status=0008 Ze status=0009 03:04:52 Check angles 03:04:52 SkyScan query 03:04:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.035<-20269 Statuses=0008 0009 03:04:53 Msec=1500 True Az=112.995 Ze=-124.035 Az status=0008 Ze status=0009 03:04:53 Check angles 03:04:53 SkyScan query 03:04:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.47<-21698 Statuses=0008 0009 03:04:53 Msec=2250 True Az=112.995 Ze=-145.47 Az status=0008 Ze status=0009 03:04:54 Check angles 03:04:54 SkyScan query 03:04:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.815<-23121 Statuses=0008 0009 03:04:54 Msec=3000 True Az=112.995 Ze=-166.815 Az status=0008 Ze status=0009 03:04:54 Check angles 03:04:54 SkyScan query 03:04:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:04:55 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:04:55 Message to Master queued w/err=0: serial=51049 error=0 03:05:00 Received message from Master: op=Filter serial=51050 03:05:00 Color wheel filter change from 0 to 0 03:05:00 FLIGetFilterPos err=0 currentPosition=0 03:05:00 FLIGetStepsRemaining err=0 RemainingSteps=0 03:05:00 Filter is already there-color wheel unchanged 03:05:00 Received message from Master: op=Shutter serial=51051 03:05:00 Shutter LASER open 03:05:00 Received message from Camera: op=State serial=51053 03:05:00 GetSingleValue result=40 Value=cccccccc 03:05:00 SkyScan query 03:05:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:05:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:05:01 Parameters OK 03:05:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:05:01 Set A/D data flow result=40 03:05:01 Set A/D channel type result=40 03:05:01 Set A/D encoding result=40 03:05:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:05:01 Set channel filter=0.000000e+000 result=40 03:05:01 Config A/D Result=40 03:05:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:05:01 Get A/D filter: -9.255963e+061 result=40 03:05:01 Get A/D value=-858993460 result=40 03:05:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:05:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:05:01 Parameters OK 03:05:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:05:01 Set A/D data flow result=40 03:05:01 Set A/D channel type result=40 03:05:01 Set A/D encoding result=40 03:05:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:05:01 Set channel filter=0.000000e+000 result=40 03:05:01 Config A/D Result=40 03:05:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:05:01 Get A/D filter: -9.255963e+061 result=40 03:05:01 Get A/D value=-858993460 result=40 03:05:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:05:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:05:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:05:01 Aux= 03:05:01 Message to Camera, serial 51053 queued 03:05:09 Received message from Master: op=Shutter serial=51063 03:05:09 Shutter LASER close 03:05:10 Received message from Master: op=PointingHead serial=51067 03:05:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:05:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:05:10 Point started: ret=0 03:05:10 point_skyscan result=0 03:05:11 Check angles 03:05:11 SkyScan query 03:05:12 SkyScan query done: ret=0 az=89.625<-5975 ze=156.855<-1543 Statuses=0009 0009 03:05:12 Msec=0 True Az=89.625 Ze=156.855 Az status=0009 Ze status=0009 03:05:12 Check angles 03:05:12 SkyScan query 03:05:12 SkyScan query done: ret=0 az=72<-4800 ze=135.885<-2941 Statuses=0009 0009 03:05:12 Msec=750 True Az=72 Ze=135.885 Az status=0009 Ze status=0009 03:05:12 Check angles 03:05:12 SkyScan query 03:05:13 SkyScan query done: ret=0 az=54.81<-3654 ze=114.96<-4336 Statuses=0009 0009 03:05:13 Msec=1500 True Az=54.81 Ze=114.96 Az status=0009 Ze status=0009 03:05:13 Check angles 03:05:13 SkyScan query 03:05:14 SkyScan query done: ret=0 az=40.89<-2726 ze=93.99<-5734 Statuses=0009 0009 03:05:14 Msec=2250 True Az=40.89 Ze=93.99 Az status=0009 Ze status=0009 03:05:14 Check angles 03:05:14 SkyScan query 03:05:15 SkyScan query done: ret=0 az=40.995<-2733 ze=73.02<-7132 Statuses=0008 0009 03:05:15 Msec=3000 True Az=40.995 Ze=73.02 Az status=0008 Ze status=0009 03:05:15 Check angles 03:05:15 SkyScan query 03:05:15 SkyScan query done: ret=0 az=40.995<-2733 ze=52.575<-8495 Statuses=0008 0009 03:05:15 Msec=3750 True Az=40.995 Ze=52.575 Az status=0008 Ze status=0009 03:05:15 Check angles 03:05:15 SkyScan query 03:05:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:05:16 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:05:16 Message to Master queued w/err=0: serial=51067 error=0 03:05:21 Received message from Master: op=Filter serial=51068 03:05:21 Color wheel filter change from 0 to 0 03:05:21 FLIGetFilterPos err=0 currentPosition=0 03:05:21 FLIGetStepsRemaining err=0 RemainingSteps=0 03:05:21 Filter is already there-color wheel unchanged 03:05:21 Received message from Master: op=Shutter serial=51069 03:05:21 Shutter LASER close 03:05:21 Received message from Camera: op=State serial=51071 03:05:21 GetSingleValue result=40 Value=cccccccc 03:05:21 SkyScan query 03:05:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:05:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:05:22 Parameters OK 03:05:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:05:22 Set A/D data flow result=40 03:05:22 Set A/D channel type result=40 03:05:22 Set A/D encoding result=40 03:05:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:05:22 Set channel filter=0.000000e+000 result=40 03:05:22 Config A/D Result=40 03:05:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:05:22 Get A/D filter: -9.255963e+061 result=40 03:05:22 Get A/D value=-858993460 result=40 03:05:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:05:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:05:22 Parameters OK 03:05:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:05:22 Set A/D data flow result=40 03:05:22 Set A/D channel type result=40 03:05:22 Set A/D encoding result=40 03:05:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:05:22 Set channel filter=0.000000e+000 result=40 03:05:22 Config A/D Result=40 03:05:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:05:22 Get A/D filter: -9.255963e+061 result=40 03:05:22 Get A/D value=-858993460 result=40 03:05:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:05:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:05:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:05:22 Aux= [UTC 2018-12-11 03:05:22] 03:05:22 Message to Camera, serial 51071 queued 03:05:58 Received message from Master: op=PointingHead serial=51083 03:05:58 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:05:58 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:05:58 Point started: ret=0 03:05:58 point_skyscan result=0 03:05:59 Check angles 03:05:59 SkyScan query 03:05:59 SkyScan query done: ret=0 az=63.6<-4240 ze=66.54<-7564 Statuses=0009 0008 03:05:59 Msec=0 True Az=63.6 Ze=66.54 Az status=0009 Ze status=0008 03:06:00 Check angles 03:06:00 SkyScan query 03:06:00 SkyScan query done: ret=0 az=81.045<-5403 ze=66.51<-7566 Statuses=0009 0008 03:06:00 Msec=750 True Az=81.045 Ze=66.51 Az status=0009 Ze status=0008 03:06:00 Check angles 03:06:00 SkyScan query 03:06:01 SkyScan query done: ret=0 az=98.94<-6596 ze=66.495<-7567 Statuses=0009 0008 03:06:01 Msec=1500 True Az=98.94 Ze=66.495 Az status=0009 Ze status=0008 03:06:01 Check angles 03:06:01 SkyScan query 03:06:02 SkyScan query done: ret=0 az=117.015<-7801 ze=66.495<-7567 Statuses=0009 0008 03:06:02 Msec=2250 True Az=117.015 Ze=66.495 Az status=0009 Ze status=0008 03:06:02 Check angles 03:06:02 SkyScan query 03:06:03 SkyScan query done: ret=0 az=134.4<-8960 ze=66.495<-7567 Statuses=0009 0008 03:06:03 Msec=3000 True Az=134.4 Ze=66.495 Az status=0009 Ze status=0008 03:06:03 Check angles 03:06:03 SkyScan query 03:06:03 SkyScan query done: ret=0 az=151.905<-10127 ze=66.495<-7567 Statuses=0009 0008 03:06:03 Msec=3750 True Az=151.905 Ze=66.495 Az status=0009 Ze status=0008 03:06:03 Check angles 03:06:03 SkyScan query 03:06:04 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:06:04 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 03:06:04 Message to Master queued w/err=0: serial=51083 error=0 03:06:09 Received message from Master: op=Filter serial=51084 03:06:09 Color wheel filter change from 0 to 0 03:06:09 FLIGetFilterPos err=0 currentPosition=0 03:06:09 FLIGetStepsRemaining err=0 RemainingSteps=0 03:06:09 Filter is already there-color wheel unchanged 03:06:09 Received message from Master: op=Shutter serial=51085 03:06:09 Shutter LASER close 03:06:09 Received message from Camera: op=State serial=51087 03:06:09 GetSingleValue result=40 Value=cccccccc 03:06:09 SkyScan query 03:06:10 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:06:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:06:10 Parameters OK 03:06:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:06:10 Set A/D data flow result=40 03:06:10 Set A/D channel type result=40 03:06:10 Set A/D encoding result=40 03:06:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:06:10 Set channel filter=0.000000e+000 result=40 03:06:10 Config A/D Result=40 03:06:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:06:10 Get A/D filter: -9.255963e+061 result=40 03:06:10 Get A/D value=-858993460 result=40 03:06:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:06:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:06:10 Parameters OK 03:06:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:06:10 Set A/D data flow result=40 03:06:10 Set A/D channel type result=40 03:06:10 Set A/D encoding result=40 03:06:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:06:10 Set channel filter=0.000000e+000 result=40 03:06:10 Config A/D Result=40 03:06:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:06:10 Get A/D filter: -9.255963e+061 result=40 03:06:10 Get A/D value=-858993460 result=40 03:06:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:06:10 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:06:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:06:10 Aux= 03:06:10 Message to Camera, serial 51087 queued 03:06:47 Received message from Master: op=PointingHead serial=51100 03:06:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:06:47 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:06:47 Point started: ret=0 03:06:47 point_skyscan result=0 03:06:48 Check angles 03:06:48 SkyScan query 03:06:48 SkyScan query done: ret=0 az=134.985<-8999 ze=36.72<-9552 Statuses=0009 0009 03:06:48 Msec=0 True Az=134.985 Ze=36.72 Az status=0009 Ze status=0009 03:06:48 Check angles 03:06:48 SkyScan query 03:06:49 SkyScan query done: ret=0 az=117.555<-7837 ze=15.81<-10946 Statuses=0009 0009 03:06:49 Msec=750 True Az=117.555 Ze=15.81 Az status=0009 Ze status=0009 03:06:49 Check angles 03:06:49 SkyScan query 03:06:50 SkyScan query done: ret=0 az=99.78<-6652 ze=-5.565<-12371 Statuses=0009 0009 03:06:50 Msec=1500 True Az=99.78 Ze=-5.565 Az status=0009 Ze status=0009 03:06:50 Check angles 03:06:50 SkyScan query 03:06:51 SkyScan query done: ret=0 az=81.96<-5464 ze=-27.015<-13801 Statuses=0009 0009 03:06:51 Msec=2250 True Az=81.96 Ze=-27.015 Az status=0009 Ze status=0009 03:06:51 Check angles 03:06:51 SkyScan query 03:06:51 SkyScan query done: ret=0 az=64.425<-4295 ze=-38.565<-14571 Statuses=0009 0008 03:06:51 Msec=3000 True Az=64.425 Ze=-38.565 Az status=0009 Ze status=0008 03:06:52 Check angles 03:06:52 SkyScan query 03:06:52 SkyScan query done: ret=0 az=47.04<-3136 ze=-38.535<-14569 Statuses=0009 0008 03:06:52 Msec=3750 True Az=47.04 Ze=-38.535 Az status=0009 Ze status=0008 03:06:52 Check angles 03:06:52 SkyScan query 03:06:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:06:53 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 03:06:53 Message to Master queued w/err=0: serial=51100 error=0 03:06:58 Received message from Master: op=Filter serial=51101 03:06:58 Color wheel filter change from 0 to 0 03:06:58 FLIGetFilterPos err=0 currentPosition=0 03:06:58 FLIGetStepsRemaining err=0 RemainingSteps=0 03:06:58 Filter is already there-color wheel unchanged 03:06:58 Received message from Master: op=Shutter serial=51102 03:06:58 Shutter LASER close 03:06:58 Received message from Camera: op=State serial=51104 03:06:58 GetSingleValue result=40 Value=cccccccc 03:06:58 SkyScan query 03:06:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:06:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:06:59 Parameters OK 03:06:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:06:59 Set A/D data flow result=40 03:06:59 Set A/D channel type result=40 03:06:59 Set A/D encoding result=40 03:06:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:06:59 Set channel filter=0.000000e+000 result=40 03:06:59 Config A/D Result=40 03:06:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:06:59 Get A/D filter: -9.255963e+061 result=40 03:06:59 Get A/D value=-858993460 result=40 03:06:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:06:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:06:59 Parameters OK 03:06:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:06:59 Set A/D data flow result=40 03:06:59 Set A/D channel type result=40 03:06:59 Set A/D encoding result=40 03:06:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:06:59 Set channel filter=0.000000e+000 result=40 03:06:59 Config A/D Result=40 03:06:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:06:59 Get A/D filter: -9.255963e+061 result=40 03:06:59 Get A/D value=-858993460 result=40 03:06:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:06:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:06:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:06:59 Aux= 03:06:59 Message to Camera, serial 51104 queued 03:07:35 Received message from Master: op=PointingHead serial=51117 03:07:35 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:07:35 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:07:36 Point started: ret=0 03:07:36 point_skyscan result=0 03:07:37 Check angles 03:07:37 SkyScan query 03:07:37 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.4<-16560 Statuses=0009 0009 03:07:37 Msec=0 True Az=64.215 Ze=-68.4 Az status=0009 Ze status=0009 03:07:37 Check angles 03:07:37 SkyScan query 03:07:38 SkyScan query done: ret=0 az=81.825<-5455 ze=-89.805<-17987 Statuses=0009 0009 03:07:38 Msec=750 True Az=81.825 Ze=-89.805 Az status=0009 Ze status=0009 03:07:38 Check angles 03:07:38 SkyScan query 03:07:39 SkyScan query done: ret=0 az=99.48<-6632 ze=-110.775<-19385 Statuses=0009 0009 03:07:39 Msec=1500 True Az=99.48 Ze=-110.775 Az status=0009 Ze status=0009 03:07:39 Check angles 03:07:39 SkyScan query 03:07:39 SkyScan query done: ret=0 az=116.985<-7799 ze=-131.685<-20779 Statuses=0009 0009 03:07:39 Msec=2250 True Az=116.985 Ze=-131.685 Az status=0009 Ze status=0009 03:07:40 Check angles 03:07:40 SkyScan query 03:07:40 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 03:07:40 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 03:07:40 Check angles 03:07:40 SkyScan query 03:07:41 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:07:41 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:07:41 Message to Master queued w/err=0: serial=51117 error=0 03:07:46 Received message from Master: op=Filter serial=51118 03:07:46 Color wheel filter change from 0 to 0 03:07:46 FLIGetFilterPos err=0 currentPosition=0 03:07:46 FLIGetStepsRemaining err=0 RemainingSteps=0 03:07:46 Filter is already there-color wheel unchanged 03:07:46 Received message from Master: op=Shutter serial=51119 03:07:46 Shutter LASER close 03:07:46 Received message from Camera: op=State serial=51121 03:07:46 GetSingleValue result=40 Value=cccccccc 03:07:46 SkyScan query 03:07:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:07:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:07:47 Parameters OK 03:07:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:07:47 Set A/D data flow result=40 03:07:47 Set A/D channel type result=40 03:07:47 Set A/D encoding result=40 03:07:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:07:47 Set channel filter=0.000000e+000 result=40 03:07:47 Config A/D Result=40 03:07:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:07:47 Get A/D filter: -9.255963e+061 result=40 03:07:47 Get A/D value=-858993460 result=40 03:07:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:07:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:07:47 Parameters OK 03:07:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:07:47 Set A/D data flow result=40 03:07:47 Set A/D channel type result=40 03:07:47 Set A/D encoding result=40 03:07:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:07:47 Set channel filter=0.000000e+000 result=40 03:07:47 Config A/D Result=40 03:07:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:07:47 Get A/D filter: -9.255963e+061 result=40 03:07:47 Get A/D value=-858993460 result=40 03:07:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:07:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:07:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:07:47 Aux= 03:07:47 Message to Camera, serial 51121 queued 03:08:24 Received message from Master: op=PointingHead serial=51134 03:08:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:08:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:08:24 Point started: ret=0 03:08:24 point_skyscan result=0 03:08:25 Check angles 03:08:25 SkyScan query 03:08:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.51<-23434 Statuses=0009 0009 03:08:25 Msec=0 True Az=112.995 Ze=-171.51 Az status=0009 Ze status=0009 03:08:25 Check angles 03:08:25 SkyScan query 03:08:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:08:26 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:08:26 Message to Master queued w/err=0: serial=51134 error=0 03:08:31 Received message from Master: op=Filter serial=51135 03:08:31 Color wheel filter change from 0 to 0 03:08:31 FLIGetFilterPos err=0 currentPosition=0 03:08:31 FLIGetStepsRemaining err=0 RemainingSteps=0 03:08:31 Filter is already there-color wheel unchanged 03:08:31 Received message from Master: op=Shutter serial=51136 03:08:31 Shutter LASER open 03:08:31 Received message from Camera: op=State serial=51138 03:08:31 GetSingleValue result=40 Value=cccccccc 03:08:31 SkyScan query 03:08:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:08:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:08:32 Parameters OK 03:08:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:08:32 Set A/D data flow result=40 03:08:32 Set A/D channel type result=40 03:08:32 Set A/D encoding result=40 03:08:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:08:32 Set channel filter=0.000000e+000 result=40 03:08:32 Config A/D Result=40 03:08:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:08:32 Get A/D filter: -9.255963e+061 result=40 03:08:32 Get A/D value=-858993460 result=40 03:08:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:08:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:08:32 Parameters OK 03:08:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:08:32 Set A/D data flow result=40 03:08:32 Set A/D channel type result=40 03:08:32 Set A/D encoding result=40 03:08:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:08:32 Set channel filter=0.000000e+000 result=40 03:08:32 Config A/D Result=40 03:08:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:08:32 Get A/D filter: -9.255963e+061 result=40 03:08:32 Get A/D value=-858993460 result=40 03:08:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:08:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:08:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:08:32 Aux= 03:08:32 Message to Camera, serial 51138 queued 03:08:40 Received message from Master: op=Shutter serial=51148 03:08:40 Shutter LASER close 03:08:41 Received message from Master: op=PointingHead serial=51152 03:08:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:08:41 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:08:41 Point started: ret=0 03:08:41 point_skyscan result=0 03:08:42 Check angles 03:08:42 SkyScan query 03:08:43 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.535<-21569 Statuses=0009 0009 03:08:43 Msec=0 True Az=135.75 Ze=-143.535 Az status=0009 Ze status=0009 03:08:43 Check angles 03:08:43 SkyScan query 03:08:43 SkyScan query done: ret=0 az=153.225<-10215 ze=-122.55<-20170 Statuses=0009 0009 03:08:43 Msec=750 True Az=153.225 Ze=-122.55 Az status=0009 Ze status=0009 03:08:44 Check angles 03:08:44 SkyScan query 03:08:44 SkyScan query done: ret=0 az=171.075<-11405 ze=-101.175<-18745 Statuses=0009 0009 03:08:44 Msec=1500 True Az=171.075 Ze=-101.175 Az status=0009 Ze status=0009 03:08:44 Check angles 03:08:44 SkyScan query 03:08:45 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.77<-17318 Statuses=0008 0009 03:08:45 Msec=2250 True Az=176.025 Ze=-79.77 Az status=0008 Ze status=0009 03:08:45 Check angles 03:08:45 SkyScan query 03:08:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.77<-15918 Statuses=0008 0009 03:08:46 Msec=3000 True Az=175.995 Ze=-58.77 Az status=0008 Ze status=0009 03:08:46 Check angles 03:08:46 SkyScan query 03:08:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:08:46 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:08:46 Message to Master queued w/err=0: serial=51152 error=0 03:08:51 Received message from Master: op=Filter serial=51153 03:08:51 Color wheel filter change from 0 to 0 03:08:51 FLIGetFilterPos err=0 currentPosition=0 03:08:51 FLIGetStepsRemaining err=0 RemainingSteps=0 03:08:51 Filter is already there-color wheel unchanged 03:08:52 Received message from Master: op=Shutter serial=51154 03:08:52 Shutter LASER close 03:08:52 Received message from Camera: op=State serial=51156 03:08:52 GetSingleValue result=40 Value=cccccccc 03:08:52 SkyScan query 03:08:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:08:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:08:52 Parameters OK 03:08:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:08:52 Set A/D data flow result=40 03:08:52 Set A/D channel type result=40 03:08:52 Set A/D encoding result=40 03:08:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:08:52 Set channel filter=0.000000e+000 result=40 03:08:52 Config A/D Result=40 03:08:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:08:52 Get A/D filter: -9.255963e+061 result=40 03:08:52 Get A/D value=-858993460 result=40 03:08:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:08:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:08:52 Parameters OK 03:08:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:08:52 Set A/D data flow result=40 03:08:52 Set A/D channel type result=40 03:08:52 Set A/D encoding result=40 03:08:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:08:52 Set channel filter=0.000000e+000 result=40 03:08:52 Config A/D Result=40 03:08:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:08:52 Get A/D filter: -9.255963e+061 result=40 03:08:52 Get A/D value=-858993460 result=40 03:08:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:08:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:08:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:08:52 Aux= 03:08:52 Message to Camera, serial 51156 queued 03:09:29 Received message from Master: op=PointingHead serial=51169 03:09:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:09:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:09:29 Point started: ret=0 03:09:29 point_skyscan result=0 03:09:30 Check angles 03:09:30 SkyScan query 03:09:31 SkyScan query done: ret=0 az=153.18<-10212 ze=-22.08<-13472 Statuses=0009 0009 03:09:31 Msec=0 True Az=153.18 Ze=-22.08 Az status=0009 Ze status=0009 03:09:31 Check angles 03:09:31 SkyScan query 03:09:32 SkyScan query done: ret=0 az=135.78<-9052 ze=-1.065<-12071 Statuses=0009 0009 03:09:32 Msec=750 True Az=135.78 Ze=-1.065 Az status=0009 Ze status=0009 03:09:32 Check angles 03:09:32 SkyScan query 03:09:32 SkyScan query done: ret=0 az=118.14<-7876 ze=19.875<-10675 Statuses=0009 0009 03:09:32 Msec=1500 True Az=118.14 Ze=19.875 Az status=0009 Ze status=0009 03:09:32 Check angles 03:09:32 SkyScan query 03:09:33 SkyScan query done: ret=0 az=100.68<-6712 ze=40.83<-9278 Statuses=0009 0009 03:09:33 Msec=2250 True Az=100.68 Ze=40.83 Az status=0009 Ze status=0009 03:09:33 Check angles 03:09:33 SkyScan query 03:09:34 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 03:09:34 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 03:09:34 Check angles 03:09:34 SkyScan query 03:09:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:09:35 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:09:35 Message to Master queued w/err=0: serial=51169 error=0 03:09:40 Received message from Master: op=Filter serial=51170 03:09:40 Color wheel filter change from 0 to 0 03:09:40 FLIGetFilterPos err=0 currentPosition=0 03:09:40 FLIGetStepsRemaining err=0 RemainingSteps=0 03:09:40 Filter is already there-color wheel unchanged 03:09:40 Received message from Master: op=Shutter serial=51171 03:09:40 Shutter LASER close 03:09:40 Received message from Camera: op=State serial=51173 03:09:40 GetSingleValue result=40 Value=cccccccc 03:09:40 SkyScan query 03:09:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:09:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:09:40 Parameters OK 03:09:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:09:40 Set A/D data flow result=40 03:09:40 Set A/D channel type result=40 03:09:40 Set A/D encoding result=40 03:09:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:09:40 Set channel filter=0.000000e+000 result=40 03:09:40 Config A/D Result=40 03:09:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:09:40 Get A/D filter: -9.255963e+061 result=40 03:09:40 Get A/D value=-858993460 result=40 03:09:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:09:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:09:40 Parameters OK 03:09:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:09:40 Set A/D data flow result=40 03:09:40 Set A/D channel type result=40 03:09:40 Set A/D encoding result=40 03:09:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:09:40 Set channel filter=0.000000e+000 result=40 03:09:40 Config A/D Result=40 03:09:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:09:40 Get A/D filter: -9.255963e+061 result=40 03:09:40 Get A/D value=-858993460 result=40 03:09:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:09:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:09:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:09:40 Aux= 03:09:40 Message to Camera, serial 51173 queued 03:10:16 Received message from Master: op=PointingHead serial=51185 03:10:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:10:16 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:10:17 Point started: ret=0 03:10:17 point_skyscan result=0 03:10:17 Check angles 03:10:17 SkyScan query 03:10:18 SkyScan query done: ret=0 az=109.395<-7293 ze=38.49<-9434 Statuses=0009 0008 03:10:18 Msec=0 True Az=109.395 Ze=38.49 Az status=0009 Ze status=0008 03:10:18 Check angles 03:10:18 SkyScan query 03:10:19 SkyScan query done: ret=0 az=126.84<-8456 ze=38.505<-9433 Statuses=0009 0008 03:10:19 Msec=750 True Az=126.84 Ze=38.505 Az status=0009 Ze status=0008 03:10:19 Check angles 03:10:19 SkyScan query 03:10:20 SkyScan query done: ret=0 az=144.3<-9620 ze=38.505<-9433 Statuses=0009 0008 03:10:20 Msec=1500 True Az=144.3 Ze=38.505 Az status=0009 Ze status=0008 03:10:20 Check angles 03:10:20 SkyScan query 03:10:20 SkyScan query done: ret=0 az=162.12<-10808 ze=38.505<-9433 Statuses=0009 0008 03:10:20 Msec=2250 True Az=162.12 Ze=38.505 Az status=0009 Ze status=0008 03:10:20 Check angles 03:10:20 SkyScan query 03:10:21 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 03:10:21 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 03:10:21 Check angles 03:10:21 SkyScan query 03:10:22 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:10:22 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:10:22 Message to Master queued w/err=0: serial=51185 error=0 03:10:27 Received message from Master: op=Filter serial=51186 03:10:27 Color wheel filter change from 0 to 0 03:10:27 FLIGetFilterPos err=0 currentPosition=0 03:10:27 FLIGetStepsRemaining err=0 RemainingSteps=0 03:10:27 Filter is already there-color wheel unchanged 03:10:27 Received message from Master: op=Shutter serial=51187 03:10:27 Shutter LASER close 03:10:27 Received message from Camera: op=State serial=51189 03:10:27 GetSingleValue result=40 Value=cccccccc 03:10:27 SkyScan query 03:10:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:10:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:10:28 Parameters OK 03:10:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:10:28 Set A/D data flow result=40 03:10:28 Set A/D channel type result=40 03:10:28 Set A/D encoding result=40 03:10:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:10:28 Set channel filter=0.000000e+000 result=40 03:10:28 Config A/D Result=40 03:10:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:10:28 Get A/D filter: -9.255963e+061 result=40 03:10:28 Get A/D value=-858993460 result=40 03:10:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:10:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:10:28 Parameters OK 03:10:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:10:28 Set A/D data flow result=40 03:10:28 Set A/D channel type result=40 03:10:28 Set A/D encoding result=40 03:10:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:10:28 Set channel filter=0.000000e+000 result=40 03:10:28 Config A/D Result=40 03:10:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:10:28 Get A/D filter: -9.255963e+061 result=40 03:10:28 Get A/D value=-858993460 result=40 03:10:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:10:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:10:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:10:28 Aux= 03:10:28 Message to Camera, serial 51189 queued 03:11:04 Received message from Master: op=PointingHead serial=51202 03:11:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:11:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:11:05 Point started: ret=0 03:11:05 point_skyscan result=0 03:11:06 Check angles 03:11:06 SkyScan query 03:11:06 SkyScan query done: ret=0 az=152.985<-10199 ze=8.775<-11415 Statuses=0009 0009 03:11:06 Msec=0 True Az=152.985 Ze=8.775 Az status=0009 Ze status=0009 03:11:06 Check angles 03:11:06 SkyScan query 03:11:07 SkyScan query done: ret=0 az=135.645<-9043 ze=-12.21<-12814 Statuses=0009 0009 03:11:07 Msec=750 True Az=135.645 Ze=-12.21 Az status=0009 Ze status=0009 03:11:07 Check angles 03:11:07 SkyScan query 03:11:08 SkyScan query done: ret=0 az=118.11<-7874 ze=-33.135<-14209 Statuses=0009 0009 03:11:08 Msec=1500 True Az=118.11 Ze=-33.135 Az status=0009 Ze status=0009 03:11:08 Check angles 03:11:08 SkyScan query 03:11:08 SkyScan query done: ret=0 az=100.695<-6713 ze=-51.525<-15435 Statuses=0009 0009 03:11:08 Msec=2250 True Az=100.695 Ze=-51.525 Az status=0009 Ze status=0009 03:11:09 Check angles 03:11:09 SkyScan query 03:11:09 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 03:11:09 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 03:11:09 Check angles 03:11:09 SkyScan query 03:11:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:11:10 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:11:10 Message to Master queued w/err=0: serial=51202 error=0 03:11:15 Received message from Master: op=Filter serial=51203 03:11:15 Color wheel filter change from 0 to 0 03:11:15 FLIGetFilterPos err=0 currentPosition=0 03:11:15 FLIGetStepsRemaining err=0 RemainingSteps=0 03:11:15 Filter is already there-color wheel unchanged 03:11:15 Received message from Master: op=Shutter serial=51204 03:11:15 Shutter LASER close 03:11:15 Received message from Camera: op=State serial=51206 03:11:15 GetSingleValue result=40 Value=cccccccc 03:11:15 SkyScan query 03:11:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:11:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:11:16 Parameters OK 03:11:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:11:16 Set A/D data flow result=40 03:11:16 Set A/D channel type result=40 03:11:16 Set A/D encoding result=40 03:11:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:11:16 Set channel filter=0.000000e+000 result=40 03:11:16 Config A/D Result=40 03:11:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:11:16 Get A/D filter: -9.255963e+061 result=40 03:11:16 Get A/D value=-858993460 result=40 03:11:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:11:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:11:16 Parameters OK 03:11:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:11:16 Set A/D data flow result=40 03:11:16 Set A/D channel type result=40 03:11:16 Set A/D encoding result=40 03:11:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:11:16 Set channel filter=0.000000e+000 result=40 03:11:16 Config A/D Result=40 03:11:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:11:16 Get A/D filter: -9.255963e+061 result=40 03:11:16 Get A/D value=-858993460 result=40 03:11:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:11:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:11:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:11:16 Aux= 03:11:16 Message to Camera, serial 51206 queued 03:11:52 Received message from Master: op=PointingHead serial=51219 03:11:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:11:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:11:53 Point started: ret=0 03:11:53 point_skyscan result=0 03:11:54 Check angles 03:11:54 SkyScan query 03:11:54 SkyScan query done: ret=0 az=108.96<-7264 ze=-81.24<-17416 Statuses=0009 0009 03:11:54 Msec=0 True Az=108.96 Ze=-81.24 Az status=0009 Ze status=0009 03:11:54 Check angles 03:11:54 SkyScan query 03:11:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.66<-18844 Statuses=0008 0009 03:11:55 Msec=750 True Az=112.995 Ze=-102.66 Az status=0008 Ze status=0009 03:11:55 Check angles 03:11:55 SkyScan query 03:11:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.585<-20239 Statuses=0008 0009 03:11:56 Msec=1500 True Az=112.995 Ze=-123.585 Az status=0008 Ze status=0009 03:11:56 Check angles 03:11:56 SkyScan query 03:11:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.555<-21637 Statuses=0008 0009 03:11:56 Msec=2250 True Az=112.995 Ze=-144.555 Az status=0008 Ze status=0009 03:11:57 Check angles 03:11:57 SkyScan query 03:11:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.915<-23061 Statuses=0008 0009 03:11:57 Msec=3000 True Az=112.995 Ze=-165.915 Az status=0008 Ze status=0009 03:11:57 Check angles 03:11:57 SkyScan query 03:11:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:11:58 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:11:58 Message to Master queued w/err=0: serial=51219 error=0 03:12:03 Received message from Master: op=Filter serial=51220 03:12:03 Color wheel filter change from 0 to 0 03:12:03 FLIGetFilterPos err=0 currentPosition=0 03:12:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:12:03 Filter is already there-color wheel unchanged 03:12:03 Received message from Master: op=Shutter serial=51221 03:12:03 Shutter LASER open 03:12:03 Received message from Camera: op=State serial=51223 03:12:03 GetSingleValue result=40 Value=cccccccc 03:12:03 SkyScan query 03:12:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:12:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:04 Parameters OK 03:12:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:04 Set A/D data flow result=40 03:12:04 Set A/D channel type result=40 03:12:04 Set A/D encoding result=40 03:12:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:04 Set channel filter=0.000000e+000 result=40 03:12:04 Config A/D Result=40 03:12:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:04 Get A/D filter: -9.255963e+061 result=40 03:12:04 Get A/D value=-858993460 result=40 03:12:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:04 Parameters OK 03:12:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:04 Set A/D data flow result=40 03:12:04 Set A/D channel type result=40 03:12:04 Set A/D encoding result=40 03:12:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:04 Set channel filter=0.000000e+000 result=40 03:12:04 Config A/D Result=40 03:12:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:04 Get A/D filter: -9.255963e+061 result=40 03:12:04 Get A/D value=-858993460 result=40 03:12:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:12:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:12:04 Aux= 03:12:04 Message to Camera, serial 51223 queued 03:12:12 Received message from Master: op=Shutter serial=51233 03:12:12 Shutter LASER close 03:12:13 Received message from Master: op=PointingHead serial=51237 03:12:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:12:13 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:12:13 Point started: ret=0 03:12:13 point_skyscan result=0 03:12:14 Check angles 03:12:14 SkyScan query 03:12:14 SkyScan query done: ret=0 az=90.18<-6012 ze=157.575<-1495 Statuses=0009 0009 03:12:14 Msec=0 True Az=90.18 Ze=157.575 Az status=0009 Ze status=0009 03:12:15 Check angles 03:12:15 SkyScan query 03:12:15 SkyScan query done: ret=0 az=72.75<-4850 ze=136.59<-2894 Statuses=0009 0009 03:12:15 Msec=750 True Az=72.75 Ze=136.59 Az status=0009 Ze status=0009 03:12:15 Check angles 03:12:15 SkyScan query 03:12:16 SkyScan query done: ret=0 az=55.215<-3681 ze=115.665<-4289 Statuses=0009 0009 03:12:16 Msec=1500 True Az=55.215 Ze=115.665 Az status=0009 Ze status=0009 03:12:16 Check angles 03:12:16 SkyScan query 03:12:17 SkyScan query done: ret=0 az=40.86<-2724 ze=94.695<-5687 Statuses=0009 0009 03:12:17 Msec=2250 True Az=40.86 Ze=94.695 Az status=0009 Ze status=0009 03:12:17 Check angles 03:12:17 SkyScan query 03:12:17 SkyScan query done: ret=0 az=40.995<-2733 ze=73.305<-7113 Statuses=0008 0009 03:12:17 Msec=3000 True Az=40.995 Ze=73.305 Az status=0008 Ze status=0009 03:12:18 Check angles 03:12:18 SkyScan query 03:12:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.755<-8483 Statuses=0008 0009 03:12:18 Msec=3750 True Az=40.995 Ze=52.755 Az status=0008 Ze status=0009 03:12:18 Check angles 03:12:18 SkyScan query 03:12:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:12:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:12:19 Message to Master queued w/err=0: serial=51237 error=0 03:12:24 Received message from Master: op=Filter serial=51238 03:12:24 Color wheel filter change from 0 to 0 03:12:24 FLIGetFilterPos err=0 currentPosition=0 03:12:24 FLIGetStepsRemaining err=0 RemainingSteps=0 03:12:24 Filter is already there-color wheel unchanged 03:12:24 Received message from Master: op=Shutter serial=51239 03:12:24 Shutter LASER close 03:12:24 Received message from Camera: op=State serial=51241 03:12:24 GetSingleValue result=40 Value=cccccccc 03:12:24 SkyScan query 03:12:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:12:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:25 Parameters OK 03:12:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:25 Set A/D data flow result=40 03:12:25 Set A/D channel type result=40 03:12:25 Set A/D encoding result=40 03:12:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:25 Set channel filter=0.000000e+000 result=40 03:12:25 Config A/D Result=40 03:12:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:25 Get A/D filter: -9.255963e+061 result=40 03:12:25 Get A/D value=-858993460 result=40 03:12:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:25 Parameters OK 03:12:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:25 Set A/D data flow result=40 03:12:25 Set A/D channel type result=40 03:12:25 Set A/D encoding result=40 03:12:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:25 Set channel filter=0.000000e+000 result=40 03:12:25 Config A/D Result=40 03:12:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:25 Get A/D filter: -9.255963e+061 result=40 03:12:25 Get A/D value=-858993460 result=40 03:12:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:12:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:12:25 Aux= 03:12:25 Message to Camera, serial 51241 queued 03:13:02 Received message from Master: op=PointingHead serial=51254 03:13:02 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:13:02 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:13:02 Point started: ret=0 03:13:02 point_skyscan result=0 03:13:03 Check angles 03:13:03 SkyScan query 03:13:03 SkyScan query done: ret=0 az=64.095<-4273 ze=66.555<-7563 Statuses=0009 0008 03:13:03 Msec=0 True Az=64.095 Ze=66.555 Az status=0009 Ze status=0008 03:13:03 Check angles 03:13:03 SkyScan query 03:13:04 SkyScan query done: ret=0 az=81.39<-5426 ze=66.495<-7567 Statuses=0009 0008 03:13:04 Msec=750 True Az=81.39 Ze=66.495 Az status=0009 Ze status=0008 03:13:04 Check angles 03:13:04 SkyScan query 03:13:05 SkyScan query done: ret=0 az=99.435<-6629 ze=66.495<-7567 Statuses=0009 0008 03:13:05 Msec=1500 True Az=99.435 Ze=66.495 Az status=0009 Ze status=0008 03:13:05 Check angles 03:13:05 SkyScan query 03:13:06 SkyScan query done: ret=0 az=117.285<-7819 ze=66.495<-7567 Statuses=0009 0008 03:13:06 Msec=2250 True Az=117.285 Ze=66.495 Az status=0009 Ze status=0008 03:13:06 Check angles 03:13:06 SkyScan query 03:13:06 SkyScan query done: ret=0 az=134.64<-8976 ze=66.495<-7567 Statuses=0009 0008 03:13:06 Msec=3000 True Az=134.64 Ze=66.495 Az status=0009 Ze status=0008 03:13:07 Check angles 03:13:07 SkyScan query 03:13:07 SkyScan query done: ret=0 az=152.16<-10144 ze=66.495<-7567 Statuses=0009 0008 03:13:07 Msec=3750 True Az=152.16 Ze=66.495 Az status=0009 Ze status=0008 03:13:07 Check angles 03:13:07 SkyScan query 03:13:08 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:13:08 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 03:13:08 Message to Master queued w/err=0: serial=51254 error=0 03:13:13 Received message from Master: op=Filter serial=51255 03:13:13 Color wheel filter change from 0 to 0 03:13:13 FLIGetFilterPos err=0 currentPosition=0 03:13:13 FLIGetStepsRemaining err=0 RemainingSteps=0 03:13:13 Filter is already there-color wheel unchanged 03:13:13 Received message from Master: op=Shutter serial=51256 03:13:13 Shutter LASER close 03:13:13 Received message from Camera: op=State serial=51258 03:13:13 GetSingleValue result=40 Value=cccccccc 03:13:13 SkyScan query 03:13:14 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:13:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:14 Parameters OK 03:13:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:14 Set A/D data flow result=40 03:13:14 Set A/D channel type result=40 03:13:14 Set A/D encoding result=40 03:13:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:14 Set channel filter=0.000000e+000 result=40 03:13:14 Config A/D Result=40 03:13:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:14 Get A/D filter: -9.255963e+061 result=40 03:13:14 Get A/D value=-858993460 result=40 03:13:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:14 Parameters OK 03:13:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:14 Set A/D data flow result=40 03:13:14 Set A/D channel type result=40 03:13:14 Set A/D encoding result=40 03:13:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:14 Set channel filter=0.000000e+000 result=40 03:13:14 Config A/D Result=40 03:13:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:14 Get A/D filter: -9.255963e+061 result=40 03:13:14 Get A/D value=-858993460 result=40 03:13:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:14 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:13:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:13:14 Aux= 03:13:14 Message to Camera, serial 51258 queued 03:13:50 Received message from Master: op=PointingHead serial=51271 03:13:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:13:50 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:13:51 Point started: ret=0 03:13:51 point_skyscan result=0 03:13:52 Check angles 03:13:52 SkyScan query 03:13:52 SkyScan query done: ret=0 az=134.565<-8971 ze=36.24<-9584 Statuses=0009 0009 03:13:52 Msec=0 True Az=134.565 Ze=36.24 Az status=0009 Ze status=0009 03:13:52 Check angles 03:13:52 SkyScan query 03:13:53 SkyScan query done: ret=0 az=117.015<-7801 ze=15.33<-10978 Statuses=0009 0009 03:13:53 Msec=750 True Az=117.015 Ze=15.33 Az status=0009 Ze status=0009 03:13:53 Check angles 03:13:53 SkyScan query 03:13:54 SkyScan query done: ret=0 az=99.75<-6650 ze=-5.655<-12377 Statuses=0009 0009 03:13:54 Msec=1500 True Az=99.75 Ze=-5.655 Az status=0009 Ze status=0009 03:13:54 Check angles 03:13:54 SkyScan query 03:13:54 SkyScan query done: ret=0 az=82.17<-5478 ze=-26.685<-13779 Statuses=0009 0009 03:13:54 Msec=2250 True Az=82.17 Ze=-26.685 Az status=0009 Ze status=0009 03:13:55 Check angles 03:13:55 SkyScan query 03:13:55 SkyScan query done: ret=0 az=64.725<-4315 ze=-38.565<-14571 Statuses=0009 0008 03:13:55 Msec=3000 True Az=64.725 Ze=-38.565 Az status=0009 Ze status=0008 03:13:55 Check angles 03:13:55 SkyScan query 03:13:56 SkyScan query done: ret=0 az=47.295<-3153 ze=-38.535<-14569 Statuses=0009 0008 03:13:56 Msec=3750 True Az=47.295 Ze=-38.535 Az status=0009 Ze status=0008 03:13:56 Check angles 03:13:56 SkyScan query 03:13:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:13:57 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 03:13:57 Message to Master queued w/err=0: serial=51271 error=0 03:14:02 Received message from Master: op=Filter serial=51272 03:14:02 Color wheel filter change from 0 to 0 03:14:02 FLIGetFilterPos err=0 currentPosition=0 03:14:02 FLIGetStepsRemaining err=0 RemainingSteps=0 03:14:02 Filter is already there-color wheel unchanged 03:14:02 Received message from Master: op=Shutter serial=51273 03:14:02 Shutter LASER close 03:14:02 Received message from Camera: op=State serial=51275 03:14:02 GetSingleValue result=40 Value=cccccccc 03:14:02 SkyScan query 03:14:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:14:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:02 Parameters OK 03:14:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:02 Set A/D data flow result=40 03:14:02 Set A/D channel type result=40 03:14:02 Set A/D encoding result=40 03:14:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:02 Set channel filter=0.000000e+000 result=40 03:14:02 Config A/D Result=40 03:14:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:02 Get A/D filter: -9.255963e+061 result=40 03:14:02 Get A/D value=-858993460 result=40 03:14:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:02 Parameters OK 03:14:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:02 Set A/D data flow result=40 03:14:02 Set A/D channel type result=40 03:14:02 Set A/D encoding result=40 03:14:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:02 Set channel filter=0.000000e+000 result=40 03:14:02 Config A/D Result=40 03:14:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:02 Get A/D filter: -9.255963e+061 result=40 03:14:02 Get A/D value=-858993460 result=40 03:14:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:14:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:14:02 Aux= 03:14:02 Message to Camera, serial 51275 queued 03:14:39 Received message from Master: op=PointingHead serial=51288 03:14:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:14:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:14:40 Point started: ret=0 03:14:40 point_skyscan result=0 03:14:40 Check angles 03:14:40 SkyScan query 03:14:41 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.07<-16538 Statuses=0009 0009 03:14:41 Msec=0 True Az=63.78 Ze=-68.07 Az status=0009 Ze status=0009 03:14:41 Check angles 03:14:41 SkyScan query 03:14:42 SkyScan query done: ret=0 az=81.555<-5437 ze=-89.505<-17967 Statuses=0009 0009 03:14:42 Msec=750 True Az=81.555 Ze=-89.505 Az status=0009 Ze status=0009 03:14:42 Check angles 03:14:42 SkyScan query 03:14:42 SkyScan query done: ret=0 az=99.645<-6643 ze=-110.895<-19393 Statuses=0009 0009 03:14:42 Msec=1500 True Az=99.645 Ze=-110.895 Az status=0009 Ze status=0009 03:14:43 Check angles 03:14:43 SkyScan query 03:14:43 SkyScan query done: ret=0 az=117.12<-7808 ze=-131.805<-20787 Statuses=0009 0009 03:14:43 Msec=2250 True Az=117.12 Ze=-131.805 Az status=0009 Ze status=0009 03:14:43 Check angles 03:14:43 SkyScan query 03:14:44 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 03:14:44 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 03:14:44 Check angles 03:14:44 SkyScan query 03:14:45 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:14:45 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:14:45 Message to Master queued w/err=0: serial=51288 error=0 03:14:50 Received message from Master: op=Filter serial=51289 03:14:50 Color wheel filter change from 0 to 0 03:14:50 FLIGetFilterPos err=0 currentPosition=0 03:14:50 FLIGetStepsRemaining err=0 RemainingSteps=0 03:14:50 Filter is already there-color wheel unchanged 03:14:50 Received message from Master: op=Shutter serial=51290 03:14:50 Shutter LASER close 03:14:50 Received message from Camera: op=State serial=51292 03:14:50 GetSingleValue result=40 Value=cccccccc 03:14:50 SkyScan query 03:14:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:14:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:51 Parameters OK 03:14:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:51 Set A/D data flow result=40 03:14:51 Set A/D channel type result=40 03:14:51 Set A/D encoding result=40 03:14:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:51 Set channel filter=0.000000e+000 result=40 03:14:51 Config A/D Result=40 03:14:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:51 Get A/D filter: -9.255963e+061 result=40 03:14:51 Get A/D value=-858993460 result=40 03:14:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:51 Parameters OK 03:14:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:51 Set A/D data flow result=40 03:14:51 Set A/D channel type result=40 03:14:51 Set A/D encoding result=40 03:14:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:51 Set channel filter=0.000000e+000 result=40 03:14:51 Config A/D Result=40 03:14:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:51 Get A/D filter: -9.255963e+061 result=40 03:14:51 Get A/D value=-858993460 result=40 03:14:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:14:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:14:51 Aux= 03:14:51 Message to Camera, serial 51292 queued 03:15:27 Received message from Master: op=PointingHead serial=51305 03:15:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:15:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:15:28 Point started: ret=0 03:15:28 point_skyscan result=0 03:15:29 Received message from Master: op=Identify serial=51306 03:15:29 Check angles 03:15:29 SkyScan query 03:15:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.51<-23434 Statuses=0009 0009 03:15:29 Msec=0 True Az=112.995 Ze=-171.51 Az status=0009 Ze status=0009 03:15:29 Check angles 03:15:29 SkyScan query 03:15:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:15:30 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:15:30 Message to Master queued w/err=0: serial=51305 error=0 03:15:35 Received message from Master: op=Filter serial=51309 03:15:35 Color wheel filter change from 0 to 0 03:15:35 FLIGetFilterPos err=0 currentPosition=0 03:15:35 FLIGetStepsRemaining err=0 RemainingSteps=0 03:15:35 Filter is already there-color wheel unchanged 03:15:35 Received message from Master: op=Shutter serial=51310 03:15:35 Shutter LASER open 03:15:35 Received message from Camera: op=State serial=51312 03:15:35 GetSingleValue result=40 Value=cccccccc 03:15:35 SkyScan query 03:15:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:15:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:36 Parameters OK 03:15:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:36 Set A/D data flow result=40 03:15:36 Set A/D channel type result=40 03:15:36 Set A/D encoding result=40 03:15:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:36 Set channel filter=0.000000e+000 result=40 03:15:36 Config A/D Result=40 03:15:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:36 Get A/D filter: -9.255963e+061 result=40 03:15:36 Get A/D value=-858993460 result=40 03:15:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:36 Parameters OK 03:15:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:36 Set A/D data flow result=40 03:15:36 Set A/D channel type result=40 03:15:36 Set A/D encoding result=40 03:15:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:36 Set channel filter=0.000000e+000 result=40 03:15:36 Config A/D Result=40 03:15:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:36 Get A/D filter: -9.255963e+061 result=40 03:15:36 Get A/D value=-858993460 result=40 03:15:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:15:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:15:36 Aux= 03:15:36 Message to Camera, serial 51312 queued 03:15:44 Received message from Master: op=Shutter serial=51322 03:15:44 Shutter LASER close 03:15:45 Received message from Master: op=PointingHead serial=51326 03:15:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:15:45 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:15:45 Point started: ret=0 03:15:45 point_skyscan result=0 03:15:46 Check angles 03:15:46 SkyScan query 03:15:47 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.265<-21551 Statuses=0009 0009 03:15:47 Msec=0 True Az=135.96 Ze=-143.265 Az status=0009 Ze status=0009 [UTC 2018-12-11 03:15:47] 03:15:47 Check angles 03:15:47 SkyScan query 03:15:47 SkyScan query done: ret=0 az=155.34<-10356 ze=-120.015<-20001 Statuses=0009 0009 03:15:47 Msec=750 True Az=155.34 Ze=-120.015 Az status=0009 Ze status=0009 03:15:47 Check angles 03:15:47 SkyScan query 03:15:48 SkyScan query done: ret=0 az=171.24<-11416 ze=-100.935<-18729 Statuses=0009 0009 03:15:48 Msec=1500 True Az=171.24 Ze=-100.935 Az status=0009 Ze status=0009 03:15:48 Check angles 03:15:48 SkyScan query 03:15:49 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.995<-17333 Statuses=0008 0009 03:15:49 Msec=2250 True Az=176.025 Ze=-79.995 Az status=0008 Ze status=0009 03:15:49 Check angles 03:15:49 SkyScan query 03:15:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.025<-15935 Statuses=0008 0009 03:15:50 Msec=3000 True Az=175.995 Ze=-59.025 Az status=0008 Ze status=0009 03:15:50 Check angles 03:15:50 SkyScan query 03:15:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:15:50 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:15:50 Message to Master queued w/err=0: serial=51326 error=0 [UTC 2018-12-11 03:15:54] 03:15:55 Received message from Master: op=Filter serial=51327 03:15:55 Color wheel filter change from 0 to 0 03:15:55 FLIGetFilterPos err=0 currentPosition=0 03:15:55 FLIGetStepsRemaining err=0 RemainingSteps=0 03:15:55 Filter is already there-color wheel unchanged 03:15:55 Received message from Master: op=Shutter serial=51328 03:15:55 Shutter LASER close 03:15:56 Received message from Camera: op=State serial=51330 03:15:56 GetSingleValue result=40 Value=cccccccc 03:15:56 SkyScan query 03:15:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:15:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:56 Parameters OK 03:15:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:56 Set A/D data flow result=40 03:15:56 Set A/D channel type result=40 03:15:56 Set A/D encoding result=40 03:15:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:56 Set channel filter=0.000000e+000 result=40 03:15:56 Config A/D Result=40 03:15:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:56 Get A/D filter: -9.255963e+061 result=40 03:15:56 Get A/D value=-858993460 result=40 03:15:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:56 Parameters OK 03:15:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:56 Set A/D data flow result=40 03:15:56 Set A/D channel type result=40 03:15:56 Set A/D encoding result=40 03:15:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:56 Set channel filter=0.000000e+000 result=40 03:15:56 Config A/D Result=40 03:15:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:56 Get A/D filter: -9.255963e+061 result=40 03:15:56 Get A/D value=-858993460 result=40 03:15:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:15:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:15:56 Aux= 03:15:56 Message to Camera, serial 51330 queued 03:16:33 Received message from Master: op=PointingHead serial=51343 03:16:33 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:16:33 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:16:33 Point started: ret=0 03:16:33 point_skyscan result=0 03:16:34 Check angles 03:16:34 SkyScan query 03:16:35 SkyScan query done: ret=0 az=152.685<-10179 ze=-21.285<-13419 Statuses=0009 0009 03:16:35 Msec=0 True Az=152.685 Ze=-21.285 Az status=0009 Ze status=0009 03:16:35 Check angles 03:16:35 SkyScan query 03:16:35 SkyScan query done: ret=0 az=135.195<-9013 ze=-0.315<-12021 Statuses=0009 0009 03:16:35 Msec=750 True Az=135.195 Ze=-0.315 Az status=0009 Ze status=0009 03:16:36 Check angles 03:16:36 SkyScan query 03:16:36 SkyScan query done: ret=0 az=117.21<-7814 ze=21.06<-10596 Statuses=0009 0009 03:16:36 Msec=1500 True Az=117.21 Ze=21.06 Az status=0009 Ze status=0009 03:16:36 Check angles 03:16:36 SkyScan query 03:16:37 SkyScan query done: ret=0 az=99.93<-6662 ze=42.03<-9198 Statuses=0009 0009 03:16:37 Msec=2250 True Az=99.93 Ze=42.03 Az status=0009 Ze status=0009 03:16:37 Check angles 03:16:37 SkyScan query 03:16:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 03:16:38 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 03:16:38 Check angles 03:16:38 SkyScan query 03:16:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:16:38 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:16:38 Message to Master queued w/err=0: serial=51343 error=0 03:16:43 Received message from Master: op=Filter serial=51344 03:16:43 Color wheel filter change from 0 to 0 03:16:43 FLIGetFilterPos err=0 currentPosition=0 03:16:43 FLIGetStepsRemaining err=0 RemainingSteps=0 03:16:43 Filter is already there-color wheel unchanged 03:16:44 Received message from Master: op=Shutter serial=51345 03:16:44 Shutter LASER close 03:16:44 Received message from Camera: op=State serial=51347 03:16:44 GetSingleValue result=40 Value=cccccccc 03:16:44 SkyScan query 03:16:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:16:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:16:44 Parameters OK 03:16:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:16:44 Set A/D data flow result=40 03:16:44 Set A/D channel type result=40 03:16:44 Set A/D encoding result=40 03:16:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:16:44 Set channel filter=0.000000e+000 result=40 03:16:44 Config A/D Result=40 03:16:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:16:44 Get A/D filter: -9.255963e+061 result=40 03:16:44 Get A/D value=-858993460 result=40 03:16:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:16:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:16:44 Parameters OK 03:16:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:16:44 Set A/D data flow result=40 03:16:44 Set A/D channel type result=40 03:16:44 Set A/D encoding result=40 03:16:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:16:44 Set channel filter=0.000000e+000 result=40 03:16:44 Config A/D Result=40 03:16:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:16:44 Get A/D filter: -9.255963e+061 result=40 03:16:44 Get A/D value=-858993460 result=40 03:16:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:16:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:16:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:16:44 Aux= 03:16:44 Message to Camera, serial 51347 queued 03:17:21 Received message from Master: op=PointingHead serial=51360 03:17:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:17:21 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:17:21 Point started: ret=0 03:17:21 point_skyscan result=0 03:17:22 Check angles 03:17:22 SkyScan query 03:17:23 SkyScan query done: ret=0 az=108.735<-7249 ze=38.475<-9435 Statuses=0009 0008 03:17:23 Msec=0 True Az=108.735 Ze=38.475 Az status=0009 Ze status=0008 03:17:23 Check angles 03:17:23 SkyScan query 03:17:24 SkyScan query done: ret=0 az=126.36<-8424 ze=38.505<-9433 Statuses=0009 0008 03:17:24 Msec=750 True Az=126.36 Ze=38.505 Az status=0009 Ze status=0008 03:17:24 Check angles 03:17:24 SkyScan query 03:17:24 SkyScan query done: ret=0 az=144.075<-9605 ze=38.505<-9433 Statuses=0009 0008 03:17:24 Msec=1500 True Az=144.075 Ze=38.505 Az status=0009 Ze status=0008 03:17:24 Check angles 03:17:24 SkyScan query 03:17:25 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 03:17:25 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 03:17:25 Check angles 03:17:25 SkyScan query 03:17:26 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 03:17:26 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 03:17:26 Check angles 03:17:26 SkyScan query 03:17:27 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:17:27 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:17:27 Message to Master queued w/err=0: serial=51360 error=0 03:17:32 Received message from Master: op=Filter serial=51361 03:17:32 Color wheel filter change from 0 to 0 03:17:32 FLIGetFilterPos err=0 currentPosition=0 03:17:32 FLIGetStepsRemaining err=0 RemainingSteps=0 03:17:32 Filter is already there-color wheel unchanged 03:17:32 Received message from Master: op=Shutter serial=51362 03:17:32 Shutter LASER close 03:17:32 Received message from Camera: op=State serial=51364 03:17:32 GetSingleValue result=40 Value=cccccccc 03:17:32 SkyScan query 03:17:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:17:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:32 Parameters OK 03:17:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:32 Set A/D data flow result=40 03:17:32 Set A/D channel type result=40 03:17:32 Set A/D encoding result=40 03:17:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:32 Set channel filter=0.000000e+000 result=40 03:17:32 Config A/D Result=40 03:17:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:32 Get A/D filter: -9.255963e+061 result=40 03:17:32 Get A/D value=-858993460 result=40 03:17:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:32 Parameters OK 03:17:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:32 Set A/D data flow result=40 03:17:32 Set A/D channel type result=40 03:17:32 Set A/D encoding result=40 03:17:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:32 Set channel filter=0.000000e+000 result=40 03:17:32 Config A/D Result=40 03:17:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:32 Get A/D filter: -9.255963e+061 result=40 03:17:32 Get A/D value=-858993460 result=40 03:17:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:17:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:17:32 Aux= 03:17:32 Message to Camera, serial 51364 queued 03:18:09 Received message from Master: op=PointingHead serial=51377 03:18:09 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:18:09 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:18:09 Point started: ret=0 03:18:09 point_skyscan result=0 03:18:10 Check angles 03:18:10 SkyScan query 03:18:11 SkyScan query done: ret=0 az=152.745<-10183 ze=8.355<-11443 Statuses=0009 0009 03:18:11 Msec=0 True Az=152.745 Ze=8.355 Az status=0009 Ze status=0009 03:18:11 Check angles 03:18:11 SkyScan query 03:18:12 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.57<-12838 Statuses=0009 0009 03:18:12 Msec=750 True Az=135.375 Ze=-12.57 Az status=0009 Ze status=0009 03:18:12 Check angles 03:18:12 SkyScan query 03:18:12 SkyScan query done: ret=0 az=117.735<-7849 ze=-33.525<-14235 Statuses=0009 0009 03:18:12 Msec=1500 True Az=117.735 Ze=-33.525 Az status=0009 Ze status=0009 03:18:13 Check angles 03:18:13 SkyScan query 03:18:13 SkyScan query done: ret=0 az=100.365<-6691 ze=-51.555<-15437 Statuses=0009 0009 03:18:13 Msec=2250 True Az=100.365 Ze=-51.555 Az status=0009 Ze status=0009 03:18:13 Check angles 03:18:13 SkyScan query 03:18:14 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 03:18:14 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 03:18:14 Check angles 03:18:14 SkyScan query 03:18:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:18:15 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:18:15 Message to Master queued w/err=0: serial=51377 error=0 03:18:20 Received message from Master: op=Filter serial=51378 03:18:20 Color wheel filter change from 0 to 0 03:18:20 FLIGetFilterPos err=0 currentPosition=0 03:18:20 FLIGetStepsRemaining err=0 RemainingSteps=0 03:18:20 Filter is already there-color wheel unchanged 03:18:20 Received message from Master: op=Shutter serial=51379 03:18:20 Shutter LASER close 03:18:20 Received message from Camera: op=State serial=51381 03:18:20 GetSingleValue result=40 Value=cccccccc 03:18:20 SkyScan query 03:18:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:18:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:18:20 Parameters OK 03:18:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:18:20 Set A/D data flow result=40 03:18:20 Set A/D channel type result=40 03:18:20 Set A/D encoding result=40 03:18:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:18:20 Set channel filter=0.000000e+000 result=40 03:18:20 Config A/D Result=40 03:18:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:18:20 Get A/D filter: -9.255963e+061 result=40 03:18:20 Get A/D value=-858993460 result=40 03:18:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:18:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:18:20 Parameters OK 03:18:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:18:20 Set A/D data flow result=40 03:18:20 Set A/D channel type result=40 03:18:20 Set A/D encoding result=40 03:18:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:18:20 Set channel filter=0.000000e+000 result=40 03:18:20 Config A/D Result=40 03:18:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:18:20 Get A/D filter: -9.255963e+061 result=40 03:18:20 Get A/D value=-858993460 result=40 03:18:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:18:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:18:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:18:20 Aux= 03:18:20 Message to Camera, serial 51381 queued 03:18:57 Received message from Master: op=PointingHead serial=51394 03:18:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:18:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:18:58 Point started: ret=0 03:18:58 point_skyscan result=0 03:18:58 Check angles 03:18:58 SkyScan query 03:18:59 SkyScan query done: ret=0 az=108.855<-7257 ze=-81.105<-17407 Statuses=0009 0009 03:18:59 Msec=0 True Az=108.855 Ze=-81.105 Az status=0009 Ze status=0009 03:18:59 Check angles 03:18:59 SkyScan query 03:19:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.09<-18806 Statuses=0008 0009 03:19:00 Msec=750 True Az=112.995 Ze=-102.09 Az status=0008 Ze status=0009 03:19:00 Check angles 03:19:00 SkyScan query 03:19:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.48<-20232 Statuses=0008 0009 03:19:00 Msec=1500 True Az=112.995 Ze=-123.48 Az status=0008 Ze status=0009 03:19:01 Check angles 03:19:01 SkyScan query 03:19:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.465<-21631 Statuses=0008 0009 03:19:01 Msec=2250 True Az=112.995 Ze=-144.465 Az status=0008 Ze status=0009 03:19:01 Check angles 03:19:01 SkyScan query 03:19:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.405<-23027 Statuses=0008 0009 03:19:02 Msec=3000 True Az=112.995 Ze=-165.405 Az status=0008 Ze status=0009 03:19:02 Check angles 03:19:02 SkyScan query 03:19:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:19:03 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:19:03 Message to Master queued w/err=0: serial=51394 error=0 03:19:08 Received message from Master: op=Filter serial=51395 03:19:08 Color wheel filter change from 0 to 0 03:19:08 FLIGetFilterPos err=0 currentPosition=0 03:19:08 FLIGetStepsRemaining err=0 RemainingSteps=0 03:19:08 Filter is already there-color wheel unchanged 03:19:08 Received message from Master: op=Shutter serial=51396 03:19:08 Shutter LASER open 03:19:08 Received message from Camera: op=State serial=51398 03:19:08 GetSingleValue result=40 Value=cccccccc 03:19:08 SkyScan query 03:19:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:19:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:09 Parameters OK 03:19:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:09 Set A/D data flow result=40 03:19:09 Set A/D channel type result=40 03:19:09 Set A/D encoding result=40 03:19:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:09 Set channel filter=0.000000e+000 result=40 03:19:09 Config A/D Result=40 03:19:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:09 Get A/D filter: -9.255963e+061 result=40 03:19:09 Get A/D value=-858993460 result=40 03:19:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:09 Parameters OK 03:19:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:09 Set A/D data flow result=40 03:19:09 Set A/D channel type result=40 03:19:09 Set A/D encoding result=40 03:19:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:09 Set channel filter=0.000000e+000 result=40 03:19:09 Config A/D Result=40 03:19:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:09 Get A/D filter: -9.255963e+061 result=40 03:19:09 Get A/D value=-858993460 result=40 03:19:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:19:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:19:09 Aux= 03:19:09 Message to Camera, serial 51398 queued 03:19:17 Received message from Master: op=Shutter serial=51408 03:19:17 Shutter LASER close 03:19:17 Received message from Master: op=PointingHead serial=51412 03:19:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:19:17 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:19:18 Point started: ret=0 03:19:18 point_skyscan result=0 03:19:19 Check angles 03:19:19 SkyScan query 03:19:19 SkyScan query done: ret=0 az=90.18<-6012 ze=157.56<-1496 Statuses=0009 0009 03:19:19 Msec=0 True Az=90.18 Ze=157.56 Az status=0009 Ze status=0009 03:19:19 Check angles 03:19:19 SkyScan query 03:19:20 SkyScan query done: ret=0 az=72.75<-4850 ze=136.53<-2898 Statuses=0009 0009 03:19:20 Msec=750 True Az=72.75 Ze=136.53 Az status=0009 Ze status=0009 03:19:20 Check angles 03:19:20 SkyScan query 03:19:21 SkyScan query done: ret=0 az=55.185<-3679 ze=115.65<-4290 Statuses=0009 0009 03:19:21 Msec=1500 True Az=55.185 Ze=115.65 Az status=0009 Ze status=0009 03:19:21 Check angles 03:19:21 SkyScan query 03:19:21 SkyScan query done: ret=0 az=40.875<-2725 ze=94.56<-5696 Statuses=0009 0009 03:19:21 Msec=2250 True Az=40.875 Ze=94.56 Az status=0009 Ze status=0009 03:19:22 Check angles 03:19:22 SkyScan query 03:19:22 SkyScan query done: ret=0 az=40.995<-2733 ze=73.74<-7084 Statuses=0008 0009 03:19:22 Msec=3000 True Az=40.995 Ze=73.74 Az status=0008 Ze status=0009 03:19:22 Check angles 03:19:22 SkyScan query 03:19:23 SkyScan query done: ret=0 az=40.995<-2733 ze=53.01<-8466 Statuses=0008 0009 03:19:23 Msec=3750 True Az=40.995 Ze=53.01 Az status=0008 Ze status=0009 03:19:23 Check angles 03:19:23 SkyScan query 03:19:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:19:24 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:19:24 Message to Master queued w/err=0: serial=51412 error=0 03:19:29 Received message from Master: op=Filter serial=51413 03:19:29 Color wheel filter change from 0 to 0 03:19:29 FLIGetFilterPos err=0 currentPosition=0 03:19:29 FLIGetStepsRemaining err=0 RemainingSteps=0 03:19:29 Filter is already there-color wheel unchanged 03:19:29 Received message from Master: op=Shutter serial=51414 03:19:29 Shutter LASER close 03:19:29 Received message from Camera: op=State serial=51416 03:19:29 GetSingleValue result=40 Value=cccccccc 03:19:29 SkyScan query 03:19:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:19:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:30 Parameters OK 03:19:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:30 Set A/D data flow result=40 03:19:30 Set A/D channel type result=40 03:19:30 Set A/D encoding result=40 03:19:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:30 Set channel filter=0.000000e+000 result=40 03:19:30 Config A/D Result=40 03:19:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:30 Get A/D filter: -9.255963e+061 result=40 03:19:30 Get A/D value=-858993460 result=40 03:19:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:30 Parameters OK 03:19:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:30 Set A/D data flow result=40 03:19:30 Set A/D channel type result=40 03:19:30 Set A/D encoding result=40 03:19:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:30 Set channel filter=0.000000e+000 result=40 03:19:30 Config A/D Result=40 03:19:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:30 Get A/D filter: -9.255963e+061 result=40 03:19:30 Get A/D value=-858993460 result=40 03:19:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:19:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:19:30 Aux= 03:19:30 Message to Camera, serial 51416 queued 03:20:05 Received message from Master: op=PointingHead serial=51428 03:20:05 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:20:05 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:20:06 Point started: ret=0 03:20:06 point_skyscan result=0 03:20:07 Check angles 03:20:07 SkyScan query 03:20:07 SkyScan query done: ret=0 az=64.245<-4283 ze=66.555<-7563 Statuses=0009 0008 03:20:07 Msec=0 True Az=64.245 Ze=66.555 Az status=0009 Ze status=0008 03:20:07 Check angles 03:20:07 SkyScan query 03:20:08 SkyScan query done: ret=0 az=81.615<-5441 ze=66.495<-7567 Statuses=0009 0008 03:20:08 Msec=750 True Az=81.615 Ze=66.495 Az status=0009 Ze status=0008 03:20:08 Check angles 03:20:08 SkyScan query 03:20:09 SkyScan query done: ret=0 az=99.69<-6646 ze=66.495<-7567 Statuses=0009 0008 03:20:09 Msec=1500 True Az=99.69 Ze=66.495 Az status=0009 Ze status=0008 03:20:09 Check angles 03:20:09 SkyScan query 03:20:09 SkyScan query done: ret=0 az=117.24<-7816 ze=66.495<-7567 Statuses=0009 0008 03:20:09 Msec=2250 True Az=117.24 Ze=66.495 Az status=0009 Ze status=0008 03:20:10 Check angles 03:20:10 SkyScan query 03:20:10 SkyScan query done: ret=0 az=134.61<-8974 ze=66.495<-7567 Statuses=0009 0008 03:20:10 Msec=3000 True Az=134.61 Ze=66.495 Az status=0009 Ze status=0008 03:20:10 Check angles 03:20:10 SkyScan query 03:20:11 SkyScan query done: ret=0 az=152.355<-10157 ze=66.495<-7567 Statuses=0009 0008 03:20:11 Msec=3750 True Az=152.355 Ze=66.495 Az status=0009 Ze status=0008 03:20:11 Check angles 03:20:11 SkyScan query 03:20:12 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:20:12 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 03:20:12 Message to Master queued w/err=0: serial=51428 error=0 03:20:17 Received message from Master: op=Filter serial=51429 03:20:17 Color wheel filter change from 0 to 0 03:20:17 FLIGetFilterPos err=0 currentPosition=0 03:20:17 FLIGetStepsRemaining err=0 RemainingSteps=0 03:20:17 Filter is already there-color wheel unchanged 03:20:17 Received message from Master: op=Shutter serial=51430 03:20:17 Shutter LASER close 03:20:17 Received message from Camera: op=State serial=51432 03:20:17 GetSingleValue result=40 Value=cccccccc 03:20:17 SkyScan query 03:20:17 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:20:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:20:17 Parameters OK 03:20:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:20:17 Set A/D data flow result=40 03:20:17 Set A/D channel type result=40 03:20:17 Set A/D encoding result=40 03:20:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:20:17 Set channel filter=0.000000e+000 result=40 03:20:17 Config A/D Result=40 03:20:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:20:17 Get A/D filter: -9.255963e+061 result=40 03:20:17 Get A/D value=-858993460 result=40 03:20:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:20:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:20:17 Parameters OK 03:20:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:20:17 Set A/D data flow result=40 03:20:17 Set A/D channel type result=40 03:20:17 Set A/D encoding result=40 03:20:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:20:17 Set channel filter=0.000000e+000 result=40 03:20:17 Config A/D Result=40 03:20:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:20:17 Get A/D filter: -9.255963e+061 result=40 03:20:17 Get A/D value=-858993460 result=40 03:20:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:20:17 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:20:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:20:17 Aux= 03:20:17 Message to Camera, serial 51432 queued 03:20:54 Received message from Master: op=PointingHead serial=51445 03:20:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:20:54 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:20:55 Point started: ret=0 03:20:55 point_skyscan result=0 03:20:55 Check angles 03:20:55 SkyScan query 03:20:56 SkyScan query done: ret=0 az=135.03<-9002 ze=36.705<-9553 Statuses=0009 0009 03:20:56 Msec=0 True Az=135.03 Ze=36.705 Az status=0009 Ze status=0009 03:20:56 Check angles 03:20:56 SkyScan query 03:20:57 SkyScan query done: ret=0 az=117.495<-7833 ze=15.78<-10948 Statuses=0009 0009 03:20:57 Msec=750 True Az=117.495 Ze=15.78 Az status=0009 Ze status=0009 03:20:57 Check angles 03:20:57 SkyScan query 03:20:57 SkyScan query done: ret=0 az=100.17<-6678 ze=-5.205<-12347 Statuses=0009 0009 03:20:57 Msec=1500 True Az=100.17 Ze=-5.205 Az status=0009 Ze status=0009 03:20:58 Check angles 03:20:58 SkyScan query 03:20:58 SkyScan query done: ret=0 az=82.635<-5509 ze=-26.145<-13743 Statuses=0009 0009 03:20:58 Msec=2250 True Az=82.635 Ze=-26.145 Az status=0009 Ze status=0009 03:20:58 Check angles 03:20:58 SkyScan query 03:20:59 SkyScan query done: ret=0 az=64.74<-4316 ze=-38.565<-14571 Statuses=0009 0008 03:20:59 Msec=3000 True Az=64.74 Ze=-38.565 Az status=0009 Ze status=0008 03:20:59 Check angles 03:20:59 SkyScan query 03:21:00 SkyScan query done: ret=0 az=47.025<-3135 ze=-38.535<-14569 Statuses=0009 0008 03:21:00 Msec=3750 True Az=47.025 Ze=-38.535 Az status=0009 Ze status=0008 03:21:00 Check angles 03:21:00 SkyScan query 03:21:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:21:01 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 03:21:01 Message to Master queued w/err=0: serial=51445 error=0 03:21:06 Received message from Master: op=Filter serial=51446 03:21:06 Color wheel filter change from 0 to 0 03:21:06 FLIGetFilterPos err=0 currentPosition=0 03:21:06 FLIGetStepsRemaining err=0 RemainingSteps=0 03:21:06 Filter is already there-color wheel unchanged 03:21:06 Received message from Master: op=Shutter serial=51447 03:21:06 Shutter LASER close 03:21:06 Received message from Camera: op=State serial=51449 03:21:06 GetSingleValue result=40 Value=cccccccc 03:21:06 SkyScan query 03:21:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:21:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:06 Parameters OK 03:21:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:06 Set A/D data flow result=40 03:21:06 Set A/D channel type result=40 03:21:06 Set A/D encoding result=40 03:21:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:06 Set channel filter=0.000000e+000 result=40 03:21:06 Config A/D Result=40 03:21:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:06 Get A/D filter: -9.255963e+061 result=40 03:21:06 Get A/D value=-858993460 result=40 03:21:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:06 Parameters OK 03:21:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:06 Set A/D data flow result=40 03:21:06 Set A/D channel type result=40 03:21:06 Set A/D encoding result=40 03:21:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:06 Set channel filter=0.000000e+000 result=40 03:21:06 Config A/D Result=40 03:21:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:06 Get A/D filter: -9.255963e+061 result=40 03:21:06 Get A/D value=-858993460 result=40 03:21:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:21:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:21:06 Aux= 03:21:06 Message to Camera, serial 51449 queued 03:21:43 Received message from Master: op=PointingHead serial=51462 03:21:43 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:21:43 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:21:43 Point started: ret=0 03:21:43 point_skyscan result=0 03:21:44 Check angles 03:21:44 SkyScan query 03:21:45 SkyScan query done: ret=0 az=64.08<-4272 ze=-68.415<-16561 Statuses=0009 0009 03:21:45 Msec=0 True Az=64.08 Ze=-68.415 Az status=0009 Ze status=0009 03:21:45 Check angles 03:21:45 SkyScan query 03:21:46 SkyScan query done: ret=0 az=81.795<-5453 ze=-89.835<-17989 Statuses=0009 0009 03:21:46 Msec=750 True Az=81.795 Ze=-89.835 Az status=0009 Ze status=0009 03:21:46 Check angles 03:21:46 SkyScan query 03:21:46 SkyScan query done: ret=0 az=99.525<-6635 ze=-110.79<-19386 Statuses=0009 0009 03:21:46 Msec=1500 True Az=99.525 Ze=-110.79 Az status=0009 Ze status=0009 03:21:47 Check angles 03:21:47 SkyScan query 03:21:47 SkyScan query done: ret=0 az=117.375<-7825 ze=-132.135<-20809 Statuses=0009 0009 03:21:47 Msec=2250 True Az=117.375 Ze=-132.135 Az status=0009 Ze status=0009 03:21:47 Check angles 03:21:47 SkyScan query 03:21:48 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 03:21:48 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 03:21:48 Check angles 03:21:48 SkyScan query 03:21:49 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:21:49 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:21:49 Message to Master queued w/err=0: serial=51462 error=0 03:21:54 Received message from Master: op=Filter serial=51463 03:21:54 Color wheel filter change from 0 to 0 03:21:54 FLIGetFilterPos err=0 currentPosition=0 03:21:54 FLIGetStepsRemaining err=0 RemainingSteps=0 03:21:54 Filter is already there-color wheel unchanged 03:21:54 Received message from Master: op=Shutter serial=51464 03:21:54 Shutter LASER close 03:21:54 Received message from Camera: op=State serial=51466 03:21:54 GetSingleValue result=40 Value=cccccccc 03:21:54 SkyScan query 03:21:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:21:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:54 Parameters OK 03:21:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:54 Set A/D data flow result=40 03:21:54 Set A/D channel type result=40 03:21:54 Set A/D encoding result=40 03:21:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:54 Set channel filter=0.000000e+000 result=40 03:21:54 Config A/D Result=40 03:21:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:54 Get A/D filter: -9.255963e+061 result=40 03:21:54 Get A/D value=-858993460 result=40 03:21:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:54 Parameters OK 03:21:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:54 Set A/D data flow result=40 03:21:54 Set A/D channel type result=40 03:21:54 Set A/D encoding result=40 03:21:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:54 Set channel filter=0.000000e+000 result=40 03:21:54 Config A/D Result=40 03:21:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:54 Get A/D filter: -9.255963e+061 result=40 03:21:54 Get A/D value=-858993460 result=40 03:21:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:54 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:21:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:21:54 Aux= 03:21:54 Message to Camera, serial 51466 queued 03:22:31 Received message from Master: op=PointingHead serial=51479 03:22:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:22:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:22:32 Point started: ret=0 03:22:32 point_skyscan result=0 03:22:32 Check angles 03:22:32 SkyScan query 03:22:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.51<-23434 Statuses=0009 0009 03:22:33 Msec=0 True Az=112.995 Ze=-171.51 Az status=0009 Ze status=0009 03:22:33 Check angles 03:22:33 SkyScan query 03:22:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:22:34 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:22:34 Message to Master queued w/err=0: serial=51479 error=0 03:22:39 Received message from Master: op=Filter serial=51480 03:22:39 Color wheel filter change from 0 to 0 03:22:39 FLIGetFilterPos err=0 currentPosition=0 03:22:39 FLIGetStepsRemaining err=0 RemainingSteps=0 03:22:39 Filter is already there-color wheel unchanged 03:22:39 Received message from Master: op=Shutter serial=51481 03:22:39 Shutter LASER open 03:22:39 Received message from Camera: op=State serial=51483 03:22:39 GetSingleValue result=40 Value=cccccccc 03:22:39 SkyScan query 03:22:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:22:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:40 Parameters OK 03:22:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:40 Set A/D data flow result=40 03:22:40 Set A/D channel type result=40 03:22:40 Set A/D encoding result=40 03:22:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:40 Set channel filter=0.000000e+000 result=40 03:22:40 Config A/D Result=40 03:22:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:40 Get A/D filter: -9.255963e+061 result=40 03:22:40 Get A/D value=-858993460 result=40 03:22:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:40 Parameters OK 03:22:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:40 Set A/D data flow result=40 03:22:40 Set A/D channel type result=40 03:22:40 Set A/D encoding result=40 03:22:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:40 Set channel filter=0.000000e+000 result=40 03:22:40 Config A/D Result=40 03:22:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:40 Get A/D filter: -9.255963e+061 result=40 03:22:40 Get A/D value=-858993460 result=40 03:22:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:22:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:22:40 Aux= 03:22:40 Message to Camera, serial 51483 queued 03:22:48 Received message from Master: op=Shutter serial=51493 03:22:48 Shutter LASER close 03:22:49 Received message from Master: op=PointingHead serial=51497 03:22:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:22:49 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:22:49 Point started: ret=0 03:22:49 point_skyscan result=0 03:22:50 Check angles 03:22:50 SkyScan query 03:22:50 SkyScan query done: ret=0 az=136.11<-9074 ze=-142.995<-21533 Statuses=0009 0009 03:22:50 Msec=0 True Az=136.11 Ze=-142.995 Az status=0009 Ze status=0009 03:22:50 Check angles 03:22:50 SkyScan query 03:22:51 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.025<-20135 Statuses=0009 0009 03:22:51 Msec=750 True Az=153.585 Ze=-122.025 Az status=0009 Ze status=0009 03:22:51 Check angles 03:22:51 SkyScan query 03:22:52 SkyScan query done: ret=0 az=171.045<-11403 ze=-101.115<-18741 Statuses=0009 0009 03:22:52 Msec=1500 True Az=171.045 Ze=-101.115 Az status=0009 Ze status=0009 03:22:52 Check angles 03:22:52 SkyScan query 03:22:53 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.175<-17345 Statuses=0008 0009 03:22:53 Msec=2250 True Az=176.025 Ze=-80.175 Az status=0008 Ze status=0009 03:22:53 Check angles 03:22:53 SkyScan query 03:22:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.19<-15946 Statuses=0008 0009 03:22:53 Msec=3000 True Az=175.995 Ze=-59.19 Az status=0008 Ze status=0009 03:22:53 Check angles 03:22:53 SkyScan query 03:22:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:22:54 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:22:54 Message to Master queued w/err=0: serial=51497 error=0 03:22:59 Received message from Master: op=Filter serial=51498 03:22:59 Color wheel filter change from 0 to 0 03:22:59 FLIGetFilterPos err=0 currentPosition=0 03:22:59 FLIGetStepsRemaining err=0 RemainingSteps=0 03:22:59 Filter is already there-color wheel unchanged 03:22:59 Received message from Master: op=Shutter serial=51499 03:22:59 Shutter LASER close 03:22:59 Received message from Camera: op=State serial=51501 03:22:59 GetSingleValue result=40 Value=cccccccc 03:22:59 SkyScan query 03:23:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:23:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:00 Parameters OK 03:23:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:00 Set A/D data flow result=40 03:23:00 Set A/D channel type result=40 03:23:00 Set A/D encoding result=40 03:23:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:00 Set channel filter=0.000000e+000 result=40 03:23:00 Config A/D Result=40 03:23:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:00 Get A/D filter: -9.255963e+061 result=40 03:23:00 Get A/D value=-858993460 result=40 03:23:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:00 Parameters OK 03:23:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:00 Set A/D data flow result=40 03:23:00 Set A/D channel type result=40 03:23:00 Set A/D encoding result=40 03:23:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:00 Set channel filter=0.000000e+000 result=40 03:23:00 Config A/D Result=40 03:23:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:00 Get A/D filter: -9.255963e+061 result=40 03:23:00 Get A/D value=-858993460 result=40 03:23:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:23:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:23:00 Aux= 03:23:00 Message to Camera, serial 51501 queued 03:23:37 Received message from Master: op=PointingHead serial=51514 03:23:37 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:23:37 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:23:37 Point started: ret=0 03:23:37 point_skyscan result=0 03:23:38 Check angles 03:23:38 SkyScan query 03:23:38 SkyScan query done: ret=0 az=153.18<-10212 ze=-22.02<-13468 Statuses=0009 0009 03:23:38 Msec=0 True Az=153.18 Ze=-22.02 Az status=0009 Ze status=0009 03:23:39 Check angles 03:23:39 SkyScan query 03:23:39 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.585<-12039 Statuses=0009 0009 03:23:39 Msec=750 True Az=135.42 Ze=-0.585 Az status=0009 Ze status=0009 03:23:39 Check angles 03:23:39 SkyScan query 03:23:40 SkyScan query done: ret=0 az=117.42<-7828 ze=20.79<-10614 Statuses=0009 0009 03:23:40 Msec=1500 True Az=117.42 Ze=20.79 Az status=0009 Ze status=0009 03:23:40 Check angles 03:23:40 SkyScan query 03:23:41 SkyScan query done: ret=0 az=100.14<-6676 ze=41.76<-9216 Statuses=0009 0009 03:23:41 Msec=2250 True Az=100.14 Ze=41.76 Az status=0009 Ze status=0009 03:23:41 Check angles 03:23:41 SkyScan query 03:23:41 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 03:23:41 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 03:23:42 Check angles 03:23:42 SkyScan query 03:23:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:23:42 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:23:42 Message to Master queued w/err=0: serial=51514 error=0 03:23:47 Received message from Master: op=Filter serial=51515 03:23:47 Color wheel filter change from 0 to 0 03:23:47 FLIGetFilterPos err=0 currentPosition=0 03:23:47 FLIGetStepsRemaining err=0 RemainingSteps=0 03:23:47 Filter is already there-color wheel unchanged 03:23:47 Received message from Master: op=Shutter serial=51516 03:23:47 Shutter LASER close 03:23:47 Received message from Camera: op=State serial=51518 03:23:47 GetSingleValue result=40 Value=cccccccc 03:23:47 SkyScan query 03:23:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:23:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:48 Parameters OK 03:23:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:48 Set A/D data flow result=40 03:23:48 Set A/D channel type result=40 03:23:48 Set A/D encoding result=40 03:23:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:48 Set channel filter=0.000000e+000 result=40 03:23:48 Config A/D Result=40 03:23:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:48 Get A/D filter: -9.255963e+061 result=40 03:23:48 Get A/D value=-858993460 result=40 03:23:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:48 Parameters OK 03:23:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:48 Set A/D data flow result=40 03:23:48 Set A/D channel type result=40 03:23:48 Set A/D encoding result=40 03:23:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:48 Set channel filter=0.000000e+000 result=40 03:23:48 Config A/D Result=40 03:23:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:48 Get A/D filter: -9.255963e+061 result=40 03:23:48 Get A/D value=-858993460 result=40 03:23:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:23:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:23:48 Aux= 03:23:48 Message to Camera, serial 51518 queued 03:24:25 Received message from Master: op=PointingHead serial=51531 03:24:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:24:25 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:24:25 Point started: ret=0 03:24:25 point_skyscan result=0 03:24:26 Check angles 03:24:26 SkyScan query 03:24:27 SkyScan query done: ret=0 az=109.365<-7291 ze=38.49<-9434 Statuses=0009 0008 03:24:27 Msec=0 True Az=109.365 Ze=38.49 Az status=0009 Ze status=0008 03:24:27 Check angles 03:24:27 SkyScan query 03:24:27 SkyScan query done: ret=0 az=127.11<-8474 ze=38.505<-9433 Statuses=0009 0008 03:24:27 Msec=750 True Az=127.11 Ze=38.505 Az status=0009 Ze status=0008 03:24:28 Check angles 03:24:28 SkyScan query 03:24:28 SkyScan query done: ret=0 az=144.54<-9636 ze=38.505<-9433 Statuses=0009 0008 03:24:28 Msec=1500 True Az=144.54 Ze=38.505 Az status=0009 Ze status=0008 03:24:28 Check angles 03:24:28 SkyScan query 03:24:29 SkyScan query done: ret=0 az=162.06<-10804 ze=38.505<-9433 Statuses=0009 0008 03:24:29 Msec=2250 True Az=162.06 Ze=38.505 Az status=0009 Ze status=0008 03:24:29 Check angles 03:24:29 SkyScan query 03:24:30 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 03:24:30 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 03:24:30 Check angles 03:24:30 SkyScan query 03:24:30 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:24:30 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:24:30 Message to Master queued w/err=0: serial=51531 error=0 03:24:35 Received message from Master: op=Filter serial=51532 03:24:35 Color wheel filter change from 0 to 0 03:24:35 FLIGetFilterPos err=0 currentPosition=0 03:24:35 FLIGetStepsRemaining err=0 RemainingSteps=0 03:24:35 Filter is already there-color wheel unchanged 03:24:36 Received message from Master: op=Shutter serial=51533 03:24:36 Shutter LASER close 03:24:36 Received message from Camera: op=State serial=51535 03:24:36 GetSingleValue result=40 Value=cccccccc 03:24:36 SkyScan query 03:24:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:24:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:36 Parameters OK 03:24:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:36 Set A/D data flow result=40 03:24:36 Set A/D channel type result=40 03:24:36 Set A/D encoding result=40 03:24:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:36 Set channel filter=0.000000e+000 result=40 03:24:36 Config A/D Result=40 03:24:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:36 Get A/D filter: -9.255963e+061 result=40 03:24:36 Get A/D value=-858993460 result=40 03:24:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:36 Parameters OK 03:24:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:36 Set A/D data flow result=40 03:24:36 Set A/D channel type result=40 03:24:36 Set A/D encoding result=40 03:24:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:36 Set channel filter=0.000000e+000 result=40 03:24:36 Config A/D Result=40 03:24:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:36 Get A/D filter: -9.255963e+061 result=40 03:24:36 Get A/D value=-858993460 result=40 03:24:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:24:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:24:36 Aux= 03:24:36 Message to Camera, serial 51535 queued 03:25:13 Received message from Master: op=PointingHead serial=51548 03:25:13 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:25:13 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:25:13 Point started: ret=0 03:25:13 point_skyscan result=0 03:25:14 Check angles 03:25:14 SkyScan query 03:25:15 SkyScan query done: ret=0 az=153.12<-10208 ze=8.865<-11409 Statuses=0009 0009 03:25:15 Msec=0 True Az=153.12 Ze=8.865 Az status=0009 Ze status=0009 03:25:15 Check angles 03:25:15 SkyScan query 03:25:15 SkyScan query done: ret=0 az=135.72<-9048 ze=-12.06<-12804 Statuses=0009 0009 03:25:15 Msec=750 True Az=135.72 Ze=-12.06 Az status=0009 Ze status=0009 03:25:16 Check angles 03:25:16 SkyScan query 03:25:16 SkyScan query done: ret=0 az=117.75<-7850 ze=-33.39<-14226 Statuses=0009 0009 03:25:16 Msec=1500 True Az=117.75 Ze=-33.39 Az status=0009 Ze status=0009 03:25:16 Check angles 03:25:16 SkyScan query 03:25:17 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.555<-15437 Statuses=0009 0009 03:25:17 Msec=2250 True Az=100.38 Ze=-51.555 Az status=0009 Ze status=0009 03:25:17 Check angles 03:25:17 SkyScan query 03:25:18 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 03:25:18 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 03:25:18 Check angles 03:25:18 SkyScan query 03:25:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:25:18 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:25:18 Message to Master queued w/err=0: serial=51548 error=0 03:25:23 Received message from Master: op=Filter serial=51549 03:25:23 Color wheel filter change from 0 to 0 03:25:23 FLIGetFilterPos err=0 currentPosition=0 03:25:23 FLIGetStepsRemaining err=0 RemainingSteps=0 03:25:23 Filter is already there-color wheel unchanged 03:25:24 Received message from Master: op=Shutter serial=51550 03:25:24 Shutter LASER close 03:25:24 Received message from Camera: op=State serial=51552 03:25:24 GetSingleValue result=40 Value=cccccccc 03:25:24 SkyScan query 03:25:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:25:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:24 Parameters OK 03:25:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:24 Set A/D data flow result=40 03:25:24 Set A/D channel type result=40 03:25:24 Set A/D encoding result=40 03:25:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:24 Set channel filter=0.000000e+000 result=40 03:25:24 Config A/D Result=40 03:25:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:24 Get A/D filter: -9.255963e+061 result=40 03:25:24 Get A/D value=-858993460 result=40 03:25:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:24 Parameters OK 03:25:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:24 Set A/D data flow result=40 03:25:24 Set A/D channel type result=40 03:25:24 Set A/D encoding result=40 03:25:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:24 Set channel filter=0.000000e+000 result=40 03:25:24 Config A/D Result=40 03:25:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:24 Get A/D filter: -9.255963e+061 result=40 03:25:24 Get A/D value=-858993460 result=40 03:25:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:25:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:25:24 Aux= 03:25:24 Message to Camera, serial 51552 queued 03:26:01 Received message from Master: op=PointingHead serial=51565 03:26:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:26:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:26:02 Point started: ret=0 03:26:02 point_skyscan result=0 03:26:02 Check angles 03:26:02 SkyScan query 03:26:03 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.495<-17433 Statuses=0009 0009 03:26:03 Msec=0 True Az=109.2 Ze=-81.495 Az status=0009 Ze status=0009 03:26:03 Check angles 03:26:03 SkyScan query 03:26:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.885<-18859 Statuses=0008 0009 03:26:04 Msec=750 True Az=112.995 Ze=-102.885 Az status=0008 Ze status=0009 03:26:04 Check angles 03:26:04 SkyScan query 03:26:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.855<-20257 Statuses=0008 0009 03:26:04 Msec=1500 True Az=112.995 Ze=-123.855 Az status=0008 Ze status=0009 03:26:05 Check angles 03:26:05 SkyScan query 03:26:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.795<-21653 Statuses=0008 0009 03:26:05 Msec=2250 True Az=112.995 Ze=-144.795 Az status=0008 Ze status=0009 03:26:05 Check angles 03:26:05 SkyScan query 03:26:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.17<-23078 Statuses=0008 0009 03:26:06 Msec=3000 True Az=112.995 Ze=-166.17 Az status=0008 Ze status=0009 03:26:06 Check angles 03:26:06 SkyScan query 03:26:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:26:07 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:26:07 Message to Master queued w/err=0: serial=51565 error=0 03:26:12 Received message from Master: op=Filter serial=51566 03:26:12 Color wheel filter change from 0 to 0 03:26:12 FLIGetFilterPos err=0 currentPosition=0 03:26:12 FLIGetStepsRemaining err=0 RemainingSteps=0 03:26:12 Filter is already there-color wheel unchanged [UTC 2018-12-11 03:26:12] 03:26:12 Received message from Master: op=Shutter serial=51567 03:26:12 Shutter LASER open 03:26:12 Received message from Camera: op=State serial=51569 03:26:12 GetSingleValue result=40 Value=cccccccc 03:26:12 SkyScan query 03:26:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:26:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:13 Parameters OK 03:26:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:13 Set A/D data flow result=40 03:26:13 Set A/D channel type result=40 03:26:13 Set A/D encoding result=40 03:26:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:13 Set channel filter=0.000000e+000 result=40 03:26:13 Config A/D Result=40 03:26:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:13 Get A/D filter: -9.255963e+061 result=40 03:26:13 Get A/D value=-858993460 result=40 03:26:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:13 Parameters OK 03:26:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:13 Set A/D data flow result=40 03:26:13 Set A/D channel type result=40 03:26:13 Set A/D encoding result=40 03:26:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:13 Set channel filter=0.000000e+000 result=40 03:26:13 Config A/D Result=40 03:26:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:13 Get A/D filter: -9.255963e+061 result=40 03:26:13 Get A/D value=-858993460 result=40 03:26:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:26:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:26:13 Aux= 03:26:13 Message to Camera, serial 51569 queued 03:26:21 Received message from Master: op=Shutter serial=51579 03:26:21 Shutter LASER close 03:26:21 Received message from Master: op=PointingHead serial=51583 03:26:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:26:21 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:26:22 Point started: ret=0 03:26:22 point_skyscan result=0 03:26:23 Check angles 03:26:23 SkyScan query 03:26:23 SkyScan query done: ret=0 az=90.045<-6003 ze=157.41<-1506 Statuses=0009 0009 03:26:23 Msec=0 True Az=90.045 Ze=157.41 Az status=0009 Ze status=0009 03:26:23 Check angles 03:26:23 SkyScan query 03:26:24 SkyScan query done: ret=0 az=72.63<-4842 ze=136.425<-2905 Statuses=0009 0009 03:26:24 Msec=750 True Az=72.63 Ze=136.425 Az status=0009 Ze status=0009 03:26:24 Check angles 03:26:24 SkyScan query 03:26:25 SkyScan query done: ret=0 az=55.065<-3671 ze=115.515<-4299 Statuses=0009 0009 03:26:25 Msec=1500 True Az=55.065 Ze=115.515 Az status=0009 Ze status=0009 03:26:25 Check angles 03:26:25 SkyScan query 03:26:25 SkyScan query done: ret=0 az=40.86<-2724 ze=94.455<-5703 Statuses=0009 0009 03:26:25 Msec=2250 True Az=40.86 Ze=94.455 Az status=0009 Ze status=0009 03:26:26 Check angles 03:26:26 SkyScan query 03:26:26 SkyScan query done: ret=0 az=40.995<-2733 ze=73.605<-7093 Statuses=0008 0009 03:26:26 Msec=3000 True Az=40.995 Ze=73.605 Az status=0008 Ze status=0009 03:26:26 Check angles 03:26:26 SkyScan query 03:26:27 SkyScan query done: ret=0 az=40.995<-2733 ze=52.935<-8471 Statuses=0008 0009 03:26:27 Msec=3750 True Az=40.995 Ze=52.935 Az status=0008 Ze status=0009 03:26:27 Check angles 03:26:27 SkyScan query 03:26:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:26:28 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:26:28 Message to Master queued w/err=0: serial=51583 error=0 03:26:33 Received message from Master: op=Filter serial=51584 03:26:33 Color wheel filter change from 0 to 0 03:26:33 FLIGetFilterPos err=0 currentPosition=0 03:26:33 FLIGetStepsRemaining err=0 RemainingSteps=0 03:26:33 Filter is already there-color wheel unchanged 03:26:33 Received message from Master: op=Shutter serial=51585 03:26:33 Shutter LASER close 03:26:33 Received message from Camera: op=State serial=51587 03:26:33 GetSingleValue result=40 Value=cccccccc 03:26:33 SkyScan query 03:26:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:26:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:34 Parameters OK 03:26:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:34 Set A/D data flow result=40 03:26:34 Set A/D channel type result=40 03:26:34 Set A/D encoding result=40 03:26:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:34 Set channel filter=0.000000e+000 result=40 03:26:34 Config A/D Result=40 03:26:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:34 Get A/D filter: -9.255963e+061 result=40 03:26:34 Get A/D value=-858993460 result=40 03:26:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:34 Parameters OK 03:26:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:34 Set A/D data flow result=40 03:26:34 Set A/D channel type result=40 03:26:34 Set A/D encoding result=40 03:26:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:34 Set channel filter=0.000000e+000 result=40 03:26:34 Config A/D Result=40 03:26:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:34 Get A/D filter: -9.255963e+061 result=40 03:26:34 Get A/D value=-858993460 result=40 03:26:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:26:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:26:34 Aux= 03:26:34 Message to Camera, serial 51587 queued 03:27:10 Received message from Master: op=PointingHead serial=51600 03:27:10 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:27:10 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:27:11 Point started: ret=0 03:27:11 point_skyscan result=0 03:27:11 Check angles 03:27:11 SkyScan query 03:27:12 SkyScan query done: ret=0 az=63.915<-4261 ze=66.555<-7563 Statuses=0009 0008 03:27:12 Msec=0 True Az=63.915 Ze=66.555 Az status=0009 Ze status=0008 03:27:12 Check angles 03:27:12 SkyScan query 03:27:13 SkyScan query done: ret=0 az=81.345<-5423 ze=66.51<-7566 Statuses=0009 0008 03:27:13 Msec=750 True Az=81.345 Ze=66.51 Az status=0009 Ze status=0008 03:27:13 Check angles 03:27:13 SkyScan query 03:27:14 SkyScan query done: ret=0 az=99.345<-6623 ze=66.495<-7567 Statuses=0009 0008 03:27:14 Msec=1500 True Az=99.345 Ze=66.495 Az status=0009 Ze status=0008 03:27:14 Check angles 03:27:14 SkyScan query 03:27:14 SkyScan query done: ret=0 az=117.225<-7815 ze=66.495<-7567 Statuses=0009 0008 03:27:14 Msec=2250 True Az=117.225 Ze=66.495 Az status=0009 Ze status=0008 03:27:15 Check angles 03:27:15 SkyScan query 03:27:15 SkyScan query done: ret=0 az=134.625<-8975 ze=66.495<-7567 Statuses=0009 0008 03:27:15 Msec=3000 True Az=134.625 Ze=66.495 Az status=0009 Ze status=0008 03:27:15 Check angles 03:27:15 SkyScan query 03:27:16 SkyScan query done: ret=0 az=152.1<-10140 ze=66.495<-7567 Statuses=0009 0008 03:27:16 Msec=3750 True Az=152.1 Ze=66.495 Az status=0009 Ze status=0008 03:27:16 Check angles 03:27:16 SkyScan query 03:27:17 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:27:17 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 03:27:17 Message to Master queued w/err=0: serial=51600 error=0 03:27:22 Received message from Master: op=Filter serial=51601 03:27:22 Color wheel filter change from 0 to 0 03:27:22 FLIGetFilterPos err=0 currentPosition=0 03:27:22 FLIGetStepsRemaining err=0 RemainingSteps=0 03:27:22 Filter is already there-color wheel unchanged 03:27:22 Received message from Master: op=Shutter serial=51602 03:27:22 Shutter LASER close 03:27:22 Received message from Camera: op=State serial=51604 03:27:22 GetSingleValue result=40 Value=cccccccc 03:27:22 SkyScan query 03:27:22 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:27:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:22 Parameters OK 03:27:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:22 Set A/D data flow result=40 03:27:22 Set A/D channel type result=40 03:27:22 Set A/D encoding result=40 03:27:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:22 Set channel filter=0.000000e+000 result=40 03:27:22 Config A/D Result=40 03:27:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:22 Get A/D filter: -9.255963e+061 result=40 03:27:22 Get A/D value=-858993460 result=40 03:27:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:22 Parameters OK 03:27:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:22 Set A/D data flow result=40 03:27:22 Set A/D channel type result=40 03:27:22 Set A/D encoding result=40 03:27:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:22 Set channel filter=0.000000e+000 result=40 03:27:22 Config A/D Result=40 03:27:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:22 Get A/D filter: -9.255963e+061 result=40 03:27:22 Get A/D value=-858993460 result=40 03:27:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:22 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:27:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:27:22 Aux= 03:27:22 Message to Camera, serial 51604 queued 03:27:58 Received message from Master: op=PointingHead serial=51616 03:27:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:27:58 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:27:59 Point started: ret=0 03:27:59 point_skyscan result=0 03:28:00 Check angles 03:28:00 SkyScan query 03:28:00 SkyScan query done: ret=0 az=134.745<-8983 ze=36.555<-9563 Statuses=0009 0009 03:28:00 Msec=0 True Az=134.745 Ze=36.555 Az status=0009 Ze status=0009 03:28:00 Check angles 03:28:00 SkyScan query 03:28:01 SkyScan query done: ret=0 az=117.21<-7814 ze=15.615<-10959 Statuses=0009 0009 03:28:01 Msec=750 True Az=117.21 Ze=15.615 Az status=0009 Ze status=0009 03:28:01 Check angles 03:28:01 SkyScan query 03:28:02 SkyScan query done: ret=0 az=99.81<-6654 ze=-5.46<-12364 Statuses=0009 0009 03:28:02 Msec=1500 True Az=99.81 Ze=-5.46 Az status=0009 Ze status=0009 03:28:02 Check angles 03:28:02 SkyScan query 03:28:02 SkyScan query done: ret=0 az=82.38<-5492 ze=-26.295<-13753 Statuses=0009 0009 03:28:02 Msec=2250 True Az=82.38 Ze=-26.295 Az status=0009 Ze status=0009 03:28:03 Check angles 03:28:03 SkyScan query 03:28:03 SkyScan query done: ret=0 az=64.785<-4319 ze=-38.58<-14572 Statuses=0009 0008 03:28:03 Msec=3000 True Az=64.785 Ze=-38.58 Az status=0009 Ze status=0008 03:28:03 Check angles 03:28:03 SkyScan query 03:28:04 SkyScan query done: ret=0 az=46.995<-3133 ze=-38.52<-14568 Statuses=0009 0008 03:28:04 Msec=3750 True Az=46.995 Ze=-38.52 Az status=0009 Ze status=0008 03:28:04 Check angles 03:28:04 SkyScan query 03:28:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:28:05 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 03:28:05 Message to Master queued w/err=0: serial=51616 error=0 03:28:10 Received message from Master: op=Filter serial=51617 03:28:10 Color wheel filter change from 0 to 0 03:28:10 FLIGetFilterPos err=0 currentPosition=0 03:28:10 FLIGetStepsRemaining err=0 RemainingSteps=0 03:28:10 Filter is already there-color wheel unchanged 03:28:10 Received message from Master: op=Shutter serial=51618 03:28:10 Shutter LASER close 03:28:10 Received message from Camera: op=State serial=51620 03:28:10 GetSingleValue result=40 Value=cccccccc 03:28:10 SkyScan query 03:28:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:28:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:10 Parameters OK 03:28:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:10 Set A/D data flow result=40 03:28:10 Set A/D channel type result=40 03:28:10 Set A/D encoding result=40 03:28:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:10 Set channel filter=0.000000e+000 result=40 03:28:10 Config A/D Result=40 03:28:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:10 Get A/D filter: -9.255963e+061 result=40 03:28:10 Get A/D value=-858993460 result=40 03:28:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:10 Parameters OK 03:28:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:10 Set A/D data flow result=40 03:28:10 Set A/D channel type result=40 03:28:10 Set A/D encoding result=40 03:28:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:10 Set channel filter=0.000000e+000 result=40 03:28:10 Config A/D Result=40 03:28:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:10 Get A/D filter: -9.255963e+061 result=40 03:28:10 Get A/D value=-858993460 result=40 03:28:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:28:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:28:10 Aux= 03:28:10 Message to Camera, serial 51620 queued 03:28:47 Received message from Master: op=PointingHead serial=51633 03:28:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:28:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:28:48 Point started: ret=0 03:28:48 point_skyscan result=0 03:28:48 Check angles 03:28:48 SkyScan query 03:28:49 SkyScan query done: ret=0 az=64.275<-4285 ze=-68.625<-16575 Statuses=0009 0009 03:28:49 Msec=0 True Az=64.275 Ze=-68.625 Az status=0009 Ze status=0009 03:28:49 Check angles 03:28:49 SkyScan query 03:28:50 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.61<-17974 Statuses=0009 0009 03:28:50 Msec=750 True Az=81.615 Ze=-89.61 Az status=0009 Ze status=0009 03:28:50 Check angles 03:28:50 SkyScan query 03:28:51 SkyScan query done: ret=0 az=99.285<-6619 ze=-110.565<-19371 Statuses=0009 0009 03:28:51 Msec=1500 True Az=99.285 Ze=-110.565 Az status=0009 Ze status=0009 03:28:51 Check angles 03:28:51 SkyScan query 03:28:51 SkyScan query done: ret=0 az=116.79<-7786 ze=-131.49<-20766 Statuses=0009 0009 03:28:51 Msec=2250 True Az=116.79 Ze=-131.49 Az status=0009 Ze status=0009 03:28:51 Check angles 03:28:51 SkyScan query 03:28:52 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 03:28:52 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 03:28:52 Check angles 03:28:52 SkyScan query 03:28:53 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:28:53 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:28:53 Message to Master queued w/err=0: serial=51633 error=0 03:28:58 Received message from Master: op=Filter serial=51634 03:28:58 Color wheel filter change from 0 to 0 03:28:58 FLIGetFilterPos err=0 currentPosition=0 03:28:58 FLIGetStepsRemaining err=0 RemainingSteps=0 03:28:58 Filter is already there-color wheel unchanged 03:28:58 Received message from Master: op=Shutter serial=51635 03:28:58 Shutter LASER close 03:28:58 Received message from Camera: op=State serial=51637 03:28:58 GetSingleValue result=40 Value=cccccccc 03:28:58 SkyScan query 03:28:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:28:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:59 Parameters OK 03:28:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:59 Set A/D data flow result=40 03:28:59 Set A/D channel type result=40 03:28:59 Set A/D encoding result=40 03:28:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:59 Set channel filter=0.000000e+000 result=40 03:28:59 Config A/D Result=40 03:28:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:59 Get A/D filter: -9.255963e+061 result=40 03:28:59 Get A/D value=-858993460 result=40 03:28:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:59 Parameters OK 03:28:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:59 Set A/D data flow result=40 03:28:59 Set A/D channel type result=40 03:28:59 Set A/D encoding result=40 03:28:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:59 Set channel filter=0.000000e+000 result=40 03:28:59 Config A/D Result=40 03:28:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:59 Get A/D filter: -9.255963e+061 result=40 03:28:59 Get A/D value=-858993460 result=40 03:28:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:59 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:28:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:28:59 Aux= 03:28:59 Message to Camera, serial 51637 queued 03:29:35 Received message from Master: op=PointingHead serial=51650 03:29:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:29:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:29:36 Point started: ret=0 03:29:36 point_skyscan result=0 03:29:37 Check angles 03:29:37 SkyScan query 03:29:37 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.925<-23395 Statuses=0009 0009 03:29:37 Msec=0 True Az=113.01 Ze=-170.925 Az status=0009 Ze status=0009 03:29:37 Check angles 03:29:37 SkyScan query 03:29:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:29:38 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:29:38 Message to Master queued w/err=0: serial=51650 error=0 03:29:43 Received message from Master: op=Filter serial=51651 03:29:43 Color wheel filter change from 0 to 0 03:29:43 FLIGetFilterPos err=0 currentPosition=0 03:29:43 FLIGetStepsRemaining err=0 RemainingSteps=0 03:29:43 Filter is already there-color wheel unchanged 03:29:43 Received message from Master: op=Shutter serial=51652 03:29:43 Shutter LASER open 03:29:43 Received message from Camera: op=State serial=51654 03:29:43 GetSingleValue result=40 Value=cccccccc 03:29:43 SkyScan query 03:29:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:29:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:44 Parameters OK 03:29:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:44 Set A/D data flow result=40 03:29:44 Set A/D channel type result=40 03:29:44 Set A/D encoding result=40 03:29:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:44 Set channel filter=0.000000e+000 result=40 03:29:44 Config A/D Result=40 03:29:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:44 Get A/D filter: -9.255963e+061 result=40 03:29:44 Get A/D value=-858993460 result=40 03:29:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:44 Parameters OK 03:29:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:44 Set A/D data flow result=40 03:29:44 Set A/D channel type result=40 03:29:44 Set A/D encoding result=40 03:29:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:44 Set channel filter=0.000000e+000 result=40 03:29:44 Config A/D Result=40 03:29:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:44 Get A/D filter: -9.255963e+061 result=40 03:29:44 Get A/D value=-858993460 result=40 03:29:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:29:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:29:44 Aux= 03:29:44 Message to Camera, serial 51654 queued 03:29:52 Received message from Master: op=Shutter serial=51664 03:29:52 Shutter LASER close 03:29:53 Received message from Master: op=PointingHead serial=51668 03:29:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:29:53 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:29:53 Point started: ret=0 03:29:53 point_skyscan result=0 03:29:54 Check angles 03:29:54 SkyScan query 03:29:55 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.175<-21545 Statuses=0009 0009 03:29:55 Msec=0 True Az=135.945 Ze=-143.175 Az status=0009 Ze status=0009 03:29:55 Check angles 03:29:55 SkyScan query 03:29:55 SkyScan query done: ret=0 az=153.54<-10236 ze=-122.205<-20147 Statuses=0009 0009 03:29:55 Msec=750 True Az=153.54 Ze=-122.205 Az status=0009 Ze status=0009 03:29:55 Check angles 03:29:55 SkyScan query 03:29:56 SkyScan query done: ret=0 az=170.895<-11393 ze=-101.325<-18755 Statuses=0009 0009 03:29:56 Msec=1500 True Az=170.895 Ze=-101.325 Az status=0009 Ze status=0009 03:29:56 Check angles 03:29:56 SkyScan query 03:29:57 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.34<-17356 Statuses=0008 0009 03:29:57 Msec=2250 True Az=176.025 Ze=-80.34 Az status=0008 Ze status=0009 03:29:57 Check angles 03:29:57 SkyScan query 03:29:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.4<-15960 Statuses=0008 0009 03:29:58 Msec=3000 True Az=175.995 Ze=-59.4 Az status=0008 Ze status=0009 03:29:58 Check angles 03:29:58 SkyScan query 03:29:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:29:58 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:29:58 Message to Master queued w/err=0: serial=51668 error=0 03:30:03 Received message from Master: op=Filter serial=51669 03:30:03 Color wheel filter change from 0 to 0 03:30:03 FLIGetFilterPos err=0 currentPosition=0 03:30:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:30:03 Filter is already there-color wheel unchanged 03:30:03 Received message from Master: op=Shutter serial=51670 03:30:03 Shutter LASER close 03:30:04 Received message from Camera: op=State serial=51672 03:30:04 GetSingleValue result=40 Value=cccccccc 03:30:04 SkyScan query 03:30:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:30:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:04 Parameters OK 03:30:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:04 Set A/D data flow result=40 03:30:04 Set A/D channel type result=40 03:30:04 Set A/D encoding result=40 03:30:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:04 Set channel filter=0.000000e+000 result=40 03:30:04 Config A/D Result=40 03:30:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:04 Get A/D filter: -9.255963e+061 result=40 03:30:04 Get A/D value=-858993460 result=40 03:30:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:04 Parameters OK 03:30:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:04 Set A/D data flow result=40 03:30:04 Set A/D channel type result=40 03:30:04 Set A/D encoding result=40 03:30:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:04 Set channel filter=0.000000e+000 result=40 03:30:04 Config A/D Result=40 03:30:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:04 Get A/D filter: -9.255963e+061 result=40 03:30:04 Get A/D value=-858993460 result=40 03:30:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:30:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:30:04 Aux= 03:30:04 Message to Camera, serial 51672 queued 03:30:41 Received message from Master: op=PointingHead serial=51685 03:30:41 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:30:41 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:30:41 Point started: ret=0 03:30:41 point_skyscan result=0 03:30:42 Check angles 03:30:42 SkyScan query 03:30:43 SkyScan query done: ret=0 az=152.805<-10187 ze=-21.735<-13449 Statuses=0009 0009 03:30:43 Msec=0 True Az=152.805 Ze=-21.735 Az status=0009 Ze status=0009 03:30:43 Check angles 03:30:43 SkyScan query 03:30:43 SkyScan query done: ret=0 az=135.465<-9031 ze=-0.735<-12049 Statuses=0009 0009 03:30:43 Msec=750 True Az=135.465 Ze=-0.735 Az status=0009 Ze status=0009 03:30:44 Check angles 03:30:44 SkyScan query 03:30:44 SkyScan query done: ret=0 az=117.78<-7852 ze=20.19<-10654 Statuses=0009 0009 03:30:44 Msec=1500 True Az=117.78 Ze=20.19 Az status=0009 Ze status=0009 03:30:44 Check angles 03:30:44 SkyScan query 03:30:45 SkyScan query done: ret=0 az=100.095<-6673 ze=41.625<-9225 Statuses=0009 0009 03:30:45 Msec=2250 True Az=100.095 Ze=41.625 Az status=0009 Ze status=0009 03:30:45 Check angles 03:30:45 SkyScan query 03:30:46 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 03:30:46 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 03:30:46 Check angles 03:30:46 SkyScan query 03:30:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:30:46 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:30:46 Message to Master queued w/err=0: serial=51685 error=0 03:30:51 Received message from Master: op=Filter serial=51686 03:30:51 Color wheel filter change from 0 to 0 03:30:51 FLIGetFilterPos err=0 currentPosition=0 03:30:51 FLIGetStepsRemaining err=0 RemainingSteps=0 03:30:51 Filter is already there-color wheel unchanged 03:30:52 Received message from Master: op=Shutter serial=51687 03:30:52 Shutter LASER close 03:30:52 Received message from Camera: op=State serial=51689 03:30:52 GetSingleValue result=40 Value=cccccccc 03:30:52 SkyScan query 03:30:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:30:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:52 Parameters OK 03:30:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:52 Set A/D data flow result=40 03:30:52 Set A/D channel type result=40 03:30:52 Set A/D encoding result=40 03:30:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:52 Set channel filter=0.000000e+000 result=40 03:30:52 Config A/D Result=40 03:30:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:52 Get A/D filter: -9.255963e+061 result=40 03:30:52 Get A/D value=-858993460 result=40 03:30:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:52 Parameters OK 03:30:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:52 Set A/D data flow result=40 03:30:52 Set A/D channel type result=40 03:30:52 Set A/D encoding result=40 03:30:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:52 Set channel filter=0.000000e+000 result=40 03:30:52 Config A/D Result=40 03:30:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:52 Get A/D filter: -9.255963e+061 result=40 03:30:52 Get A/D value=-858993460 result=40 03:30:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:30:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:30:52 Aux= 03:30:52 Message to Camera, serial 51689 queued 03:31:29 Received message from Master: op=PointingHead serial=51702 03:31:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:31:29 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:31:29 Point started: ret=0 03:31:29 point_skyscan result=0 03:31:30 Check angles 03:31:30 SkyScan query 03:31:31 SkyScan query done: ret=0 az=108.87<-7258 ze=38.475<-9435 Statuses=0009 0008 03:31:31 Msec=0 True Az=108.87 Ze=38.475 Az status=0009 Ze status=0008 03:31:31 Check angles 03:31:31 SkyScan query 03:31:32 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 03:31:32 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 03:31:32 Check angles 03:31:32 SkyScan query 03:31:32 SkyScan query done: ret=0 az=144.165<-9611 ze=38.505<-9433 Statuses=0009 0008 03:31:32 Msec=1500 True Az=144.165 Ze=38.505 Az status=0009 Ze status=0008 03:31:32 Check angles 03:31:32 SkyScan query 03:31:33 SkyScan query done: ret=0 az=161.64<-10776 ze=38.505<-9433 Statuses=0009 0008 03:31:33 Msec=2250 True Az=161.64 Ze=38.505 Az status=0009 Ze status=0008 03:31:33 Check angles 03:31:33 SkyScan query 03:31:34 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 03:31:34 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 03:31:34 Check angles 03:31:34 SkyScan query 03:31:35 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:31:35 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:31:35 Message to Master queued w/err=0: serial=51702 error=0 03:31:40 Received message from Master: op=Filter serial=51703 03:31:40 Color wheel filter change from 0 to 0 03:31:40 FLIGetFilterPos err=0 currentPosition=0 03:31:40 FLIGetStepsRemaining err=0 RemainingSteps=0 03:31:40 Filter is already there-color wheel unchanged 03:31:40 Received message from Master: op=Shutter serial=51704 03:31:40 Shutter LASER close 03:31:40 Received message from Camera: op=State serial=51706 03:31:40 GetSingleValue result=40 Value=cccccccc 03:31:40 SkyScan query 03:31:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:31:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:40 Parameters OK 03:31:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:40 Set A/D data flow result=40 03:31:40 Set A/D channel type result=40 03:31:40 Set A/D encoding result=40 03:31:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:40 Set channel filter=0.000000e+000 result=40 03:31:40 Config A/D Result=40 03:31:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:40 Get A/D filter: -9.255963e+061 result=40 03:31:40 Get A/D value=-858993460 result=40 03:31:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:40 Parameters OK 03:31:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:40 Set A/D data flow result=40 03:31:40 Set A/D channel type result=40 03:31:40 Set A/D encoding result=40 03:31:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:40 Set channel filter=0.000000e+000 result=40 03:31:40 Config A/D Result=40 03:31:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:40 Get A/D filter: -9.255963e+061 result=40 03:31:40 Get A/D value=-858993460 result=40 03:31:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:31:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:31:40 Aux= 03:31:40 Message to Camera, serial 51706 queued 03:32:17 Received message from Master: op=PointingHead serial=51719 03:32:17 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:32:17 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:32:17 Point started: ret=0 03:32:17 point_skyscan result=0 03:32:18 Check angles 03:32:18 SkyScan query 03:32:19 SkyScan query done: ret=0 az=152.985<-10199 ze=8.67<-11422 Statuses=0009 0009 03:32:19 Msec=0 True Az=152.985 Ze=8.67 Az status=0009 Ze status=0009 03:32:19 Check angles 03:32:19 SkyScan query 03:32:20 SkyScan query done: ret=0 az=135.165<-9011 ze=-12.69<-12846 Statuses=0009 0009 03:32:20 Msec=750 True Az=135.165 Ze=-12.69 Az status=0009 Ze status=0009 03:32:20 Check angles 03:32:20 SkyScan query 03:32:20 SkyScan query done: ret=0 az=117.555<-7837 ze=-33.645<-14243 Statuses=0009 0009 03:32:20 Msec=1500 True Az=117.555 Ze=-33.645 Az status=0009 Ze status=0009 03:32:21 Check angles 03:32:21 SkyScan query 03:32:21 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.555<-15437 Statuses=0009 0009 03:32:21 Msec=2250 True Az=100.23 Ze=-51.555 Az status=0009 Ze status=0009 03:32:21 Check angles 03:32:21 SkyScan query 03:32:22 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 03:32:22 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 03:32:22 Check angles 03:32:22 SkyScan query 03:32:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:32:23 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:32:23 Message to Master queued w/err=0: serial=51719 error=0 03:32:28 Received message from Master: op=Filter serial=51720 03:32:28 Color wheel filter change from 0 to 0 03:32:28 FLIGetFilterPos err=0 currentPosition=0 03:32:28 FLIGetStepsRemaining err=0 RemainingSteps=0 03:32:28 Filter is already there-color wheel unchanged 03:32:28 Received message from Master: op=Shutter serial=51721 03:32:28 Shutter LASER close 03:32:28 Received message from Camera: op=State serial=51723 03:32:28 GetSingleValue result=40 Value=cccccccc 03:32:28 SkyScan query 03:32:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:32:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:28 Parameters OK 03:32:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:28 Set A/D data flow result=40 03:32:28 Set A/D channel type result=40 03:32:28 Set A/D encoding result=40 03:32:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:28 Set channel filter=0.000000e+000 result=40 03:32:28 Config A/D Result=40 03:32:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:28 Get A/D filter: -9.255963e+061 result=40 03:32:28 Get A/D value=-858993460 result=40 03:32:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:28 Parameters OK 03:32:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:28 Set A/D data flow result=40 03:32:28 Set A/D channel type result=40 03:32:28 Set A/D encoding result=40 03:32:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:28 Set channel filter=0.000000e+000 result=40 03:32:28 Config A/D Result=40 03:32:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:28 Get A/D filter: -9.255963e+061 result=40 03:32:28 Get A/D value=-858993460 result=40 03:32:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:32:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:32:28 Aux= 03:32:28 Message to Camera, serial 51723 queued 03:33:05 Received message from Master: op=PointingHead serial=51736 03:33:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:33:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:33:06 Point started: ret=0 03:33:06 point_skyscan result=0 03:33:06 Check angles 03:33:06 SkyScan query 03:33:07 SkyScan query done: ret=0 az=108.735<-7249 ze=-81.03<-17402 Statuses=0009 0009 03:33:07 Msec=0 True Az=108.735 Ze=-81.03 Az status=0009 Ze status=0009 03:33:07 Check angles 03:33:07 SkyScan query 03:33:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.42<-18828 Statuses=0008 0009 03:33:08 Msec=750 True Az=112.995 Ze=-102.42 Az status=0008 Ze status=0009 03:33:08 Check angles 03:33:08 SkyScan query 03:33:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.39<-20226 Statuses=0008 0009 03:33:08 Msec=1500 True Az=112.995 Ze=-123.39 Az status=0008 Ze status=0009 03:33:09 Check angles 03:33:09 SkyScan query 03:33:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.33<-21622 Statuses=0008 0009 03:33:09 Msec=2250 True Az=112.995 Ze=-144.33 Az status=0008 Ze status=0009 03:33:09 Check angles 03:33:09 SkyScan query 03:33:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.705<-23047 Statuses=0008 0009 03:33:10 Msec=3000 True Az=112.995 Ze=-165.705 Az status=0008 Ze status=0009 03:33:10 Check angles 03:33:10 SkyScan query 03:33:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:33:11 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:33:11 Message to Master queued w/err=0: serial=51736 error=0 03:33:16 Received message from Master: op=Filter serial=51737 03:33:16 Color wheel filter change from 0 to 0 03:33:16 FLIGetFilterPos err=0 currentPosition=0 03:33:16 FLIGetStepsRemaining err=0 RemainingSteps=0 03:33:16 Filter is already there-color wheel unchanged 03:33:16 Received message from Master: op=Shutter serial=51738 03:33:16 Shutter LASER open 03:33:16 Received message from Camera: op=State serial=51740 03:33:16 GetSingleValue result=40 Value=cccccccc 03:33:16 SkyScan query 03:33:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:33:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:17 Parameters OK 03:33:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:17 Set A/D data flow result=40 03:33:17 Set A/D channel type result=40 03:33:17 Set A/D encoding result=40 03:33:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:17 Set channel filter=0.000000e+000 result=40 03:33:17 Config A/D Result=40 03:33:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:17 Get A/D filter: -9.255963e+061 result=40 03:33:17 Get A/D value=-858993460 result=40 03:33:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:17 Parameters OK 03:33:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:17 Set A/D data flow result=40 03:33:17 Set A/D channel type result=40 03:33:17 Set A/D encoding result=40 03:33:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:17 Set channel filter=0.000000e+000 result=40 03:33:17 Config A/D Result=40 03:33:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:17 Get A/D filter: -9.255963e+061 result=40 03:33:17 Get A/D value=-858993460 result=40 03:33:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:33:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:33:17 Aux= 03:33:17 Message to Camera, serial 51740 queued 03:33:25 Received message from Master: op=Shutter serial=51750 03:33:25 Shutter LASER close 03:33:25 Received message from Master: op=PointingHead serial=51754 03:33:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:33:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:33:26 Point started: ret=0 03:33:26 point_skyscan result=0 03:33:27 Check angles 03:33:27 SkyScan query 03:33:27 SkyScan query done: ret=0 az=90.18<-6012 ze=157.53<-1498 Statuses=0009 0009 03:33:27 Msec=0 True Az=90.18 Ze=157.53 Az status=0009 Ze status=0009 03:33:27 Check angles 03:33:27 SkyScan query 03:33:28 SkyScan query done: ret=0 az=72.3<-4820 ze=136.11<-2926 Statuses=0009 0009 03:33:28 Msec=750 True Az=72.3 Ze=136.11 Az status=0009 Ze status=0009 03:33:28 Check angles 03:33:28 SkyScan query 03:33:29 SkyScan query done: ret=0 az=54.96<-3664 ze=115.185<-4321 Statuses=0009 0009 03:33:29 Msec=1500 True Az=54.96 Ze=115.185 Az status=0009 Ze status=0009 03:33:29 Check angles 03:33:29 SkyScan query 03:33:29 SkyScan query done: ret=0 az=40.86<-2724 ze=94.185<-5721 Statuses=0009 0009 03:33:29 Msec=2250 True Az=40.86 Ze=94.185 Az status=0009 Ze status=0009 03:33:30 Check angles 03:33:30 SkyScan query 03:33:30 SkyScan query done: ret=0 az=40.995<-2733 ze=73.245<-7117 Statuses=0008 0009 03:33:30 Msec=3000 True Az=40.995 Ze=73.245 Az status=0008 Ze status=0009 03:33:30 Check angles 03:33:30 SkyScan query 03:33:31 SkyScan query done: ret=0 az=40.995<-2733 ze=52.725<-8485 Statuses=0008 0009 03:33:31 Msec=3750 True Az=40.995 Ze=52.725 Az status=0008 Ze status=0009 03:33:31 Check angles 03:33:31 SkyScan query 03:33:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:33:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:33:32 Message to Master queued w/err=0: serial=51754 error=0 03:33:37 Received message from Master: op=Filter serial=51755 03:33:37 Color wheel filter change from 0 to 0 03:33:37 FLIGetFilterPos err=0 currentPosition=0 03:33:37 FLIGetStepsRemaining err=0 RemainingSteps=0 03:33:37 Filter is already there-color wheel unchanged 03:33:37 Received message from Master: op=Shutter serial=51756 03:33:37 Shutter LASER close 03:33:37 Received message from Camera: op=State serial=51758 03:33:37 GetSingleValue result=40 Value=cccccccc 03:33:37 SkyScan query 03:33:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:33:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:38 Parameters OK 03:33:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:38 Set A/D data flow result=40 03:33:38 Set A/D channel type result=40 03:33:38 Set A/D encoding result=40 03:33:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:38 Set channel filter=0.000000e+000 result=40 03:33:38 Config A/D Result=40 03:33:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:38 Get A/D filter: -9.255963e+061 result=40 03:33:38 Get A/D value=-858993460 result=40 03:33:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:38 Parameters OK 03:33:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:38 Set A/D data flow result=40 03:33:38 Set A/D channel type result=40 03:33:38 Set A/D encoding result=40 03:33:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:38 Set channel filter=0.000000e+000 result=40 03:33:38 Config A/D Result=40 03:33:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:38 Get A/D filter: -9.255963e+061 result=40 03:33:38 Get A/D value=-858993460 result=40 03:33:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:33:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:33:38 Aux= 03:33:38 Message to Camera, serial 51758 queued 03:34:13 Received message from Master: op=PointingHead serial=51770 03:34:13 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:34:13 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:34:14 Point started: ret=0 03:34:14 point_skyscan result=0 03:34:15 Check angles 03:34:15 SkyScan query 03:34:15 SkyScan query done: ret=0 az=63.72<-4248 ze=66.555<-7563 Statuses=0009 0008 03:34:15 Msec=0 True Az=63.72 Ze=66.555 Az status=0009 Ze status=0008 03:34:15 Check angles 03:34:15 SkyScan query 03:34:16 SkyScan query done: ret=0 az=81.15<-5410 ze=66.51<-7566 Statuses=0009 0008 03:34:16 Msec=750 True Az=81.15 Ze=66.51 Az status=0009 Ze status=0008 03:34:16 Check angles 03:34:16 SkyScan query 03:34:17 SkyScan query done: ret=0 az=98.655<-6577 ze=66.495<-7567 Statuses=0009 0008 03:34:17 Msec=1500 True Az=98.655 Ze=66.495 Az status=0009 Ze status=0008 03:34:17 Check angles 03:34:17 SkyScan query 03:34:17 SkyScan query done: ret=0 az=116.565<-7771 ze=66.495<-7567 Statuses=0009 0008 03:34:17 Msec=2250 True Az=116.565 Ze=66.495 Az status=0009 Ze status=0008 03:34:18 Check angles 03:34:18 SkyScan query 03:34:18 SkyScan query done: ret=0 az=134.16<-8944 ze=66.495<-7567 Statuses=0009 0008 03:34:18 Msec=3000 True Az=134.16 Ze=66.495 Az status=0009 Ze status=0008 03:34:18 Check angles 03:34:18 SkyScan query 03:34:19 SkyScan query done: ret=0 az=151.5<-10100 ze=66.495<-7567 Statuses=0009 0008 03:34:19 Msec=3750 True Az=151.5 Ze=66.495 Az status=0009 Ze status=0008 03:34:19 Check angles 03:34:19 SkyScan query 03:34:20 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:34:20 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 03:34:20 Message to Master queued w/err=0: serial=51770 error=0 03:34:25 Received message from Master: op=Filter serial=51771 03:34:25 Color wheel filter change from 0 to 0 03:34:25 FLIGetFilterPos err=0 currentPosition=0 03:34:25 FLIGetStepsRemaining err=0 RemainingSteps=0 03:34:25 Filter is already there-color wheel unchanged 03:34:25 Received message from Master: op=Shutter serial=51772 03:34:25 Shutter LASER close 03:34:25 Received message from Camera: op=State serial=51774 03:34:25 GetSingleValue result=40 Value=cccccccc 03:34:25 SkyScan query 03:34:25 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:34:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:25 Parameters OK 03:34:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:25 Set A/D data flow result=40 03:34:25 Set A/D channel type result=40 03:34:25 Set A/D encoding result=40 03:34:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:25 Set channel filter=0.000000e+000 result=40 03:34:25 Config A/D Result=40 03:34:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:25 Get A/D filter: -9.255963e+061 result=40 03:34:25 Get A/D value=-858993460 result=40 03:34:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:25 Parameters OK 03:34:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:25 Set A/D data flow result=40 03:34:25 Set A/D channel type result=40 03:34:25 Set A/D encoding result=40 03:34:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:25 Set channel filter=0.000000e+000 result=40 03:34:25 Config A/D Result=40 03:34:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:25 Get A/D filter: -9.255963e+061 result=40 03:34:25 Get A/D value=-858993460 result=40 03:34:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:25 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:34:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:34:25 Aux= 03:34:25 Message to Camera, serial 51774 queued 03:35:02 Received message from Master: op=PointingHead serial=51787 03:35:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:35:02 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:35:03 Point started: ret=0 03:35:03 point_skyscan result=0 03:35:03 Check angles 03:35:03 SkyScan query 03:35:04 SkyScan query done: ret=0 az=134.715<-8981 ze=36.315<-9579 Statuses=0009 0009 03:35:04 Msec=0 True Az=134.715 Ze=36.315 Az status=0009 Ze status=0009 03:35:04 Check angles 03:35:04 SkyScan query 03:35:05 SkyScan query done: ret=0 az=116.85<-7790 ze=14.925<-11005 Statuses=0009 0009 03:35:05 Msec=750 True Az=116.85 Ze=14.925 Az status=0009 Ze status=0009 03:35:05 Check angles 03:35:05 SkyScan query 03:35:06 SkyScan query done: ret=0 az=99.045<-6603 ze=-6.51<-12434 Statuses=0009 0009 03:35:06 Msec=1500 True Az=99.045 Ze=-6.51 Az status=0009 Ze status=0009 03:35:06 Check angles 03:35:06 SkyScan query 03:35:06 SkyScan query done: ret=0 az=81.69<-5446 ze=-27.465<-13831 Statuses=0009 0009 03:35:06 Msec=2250 True Az=81.69 Ze=-27.465 Az status=0009 Ze status=0009 03:35:06 Check angles 03:35:06 SkyScan query 03:35:07 SkyScan query done: ret=0 az=63.765<-4251 ze=-38.565<-14571 Statuses=0009 0008 03:35:07 Msec=3000 True Az=63.765 Ze=-38.565 Az status=0009 Ze status=0008 03:35:07 Check angles 03:35:07 SkyScan query 03:35:08 SkyScan query done: ret=0 az=46.035<-3069 ze=-38.52<-14568 Statuses=0009 0008 03:35:08 Msec=3750 True Az=46.035 Ze=-38.52 Az status=0009 Ze status=0008 03:35:08 Check angles 03:35:08 SkyScan query 03:35:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:35:09 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 03:35:09 Message to Master queued w/err=0: serial=51787 error=0 03:35:14 Received message from Master: op=Filter serial=51788 03:35:14 Color wheel filter change from 0 to 0 03:35:14 FLIGetFilterPos err=0 currentPosition=0 03:35:14 FLIGetStepsRemaining err=0 RemainingSteps=0 03:35:14 Filter is already there-color wheel unchanged 03:35:14 Received message from Master: op=Shutter serial=51789 03:35:14 Shutter LASER close 03:35:14 Received message from Camera: op=State serial=51791 03:35:14 GetSingleValue result=40 Value=cccccccc 03:35:14 SkyScan query 03:35:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:35:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:14 Parameters OK 03:35:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:14 Set A/D data flow result=40 03:35:14 Set A/D channel type result=40 03:35:14 Set A/D encoding result=40 03:35:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:14 Set channel filter=0.000000e+000 result=40 03:35:14 Config A/D Result=40 03:35:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:14 Get A/D filter: -9.255963e+061 result=40 03:35:14 Get A/D value=-858993460 result=40 03:35:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:14 Parameters OK 03:35:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:14 Set A/D data flow result=40 03:35:14 Set A/D channel type result=40 03:35:14 Set A/D encoding result=40 03:35:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:14 Set channel filter=0.000000e+000 result=40 03:35:14 Config A/D Result=40 03:35:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:14 Get A/D filter: -9.255963e+061 result=40 03:35:14 Get A/D value=-858993460 result=40 03:35:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:35:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:35:14 Aux= 03:35:14 Message to Camera, serial 51791 queued 03:35:51 Received message from Master: op=PointingHead serial=51804 03:35:51 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:35:51 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:35:52 Point started: ret=0 03:35:52 point_skyscan result=0 03:35:52 Check angles 03:35:52 SkyScan query 03:35:53 SkyScan query done: ret=0 az=63.855<-4257 ze=-68.19<-16546 Statuses=0009 0009 03:35:53 Msec=0 True Az=63.855 Ze=-68.19 Az status=0009 Ze status=0009 03:35:53 Check angles 03:35:53 SkyScan query 03:35:54 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.205<-17947 Statuses=0009 0009 03:35:54 Msec=750 True Az=81.36 Ze=-89.205 Az status=0009 Ze status=0009 03:35:54 Check angles 03:35:54 SkyScan query 03:35:54 SkyScan query done: ret=0 az=98.91<-6594 ze=-110.145<-19343 Statuses=0009 0009 03:35:54 Msec=1500 True Az=98.91 Ze=-110.145 Az status=0009 Ze status=0009 [UTC 2018-12-11 03:35:54] 03:35:55 Check angles 03:35:55 SkyScan query 03:35:55 SkyScan query done: ret=0 az=116.49<-7766 ze=-131.085<-20739 Statuses=0009 0009 03:35:55 Msec=2250 True Az=116.49 Ze=-131.085 Az status=0009 Ze status=0009 03:35:55 Check angles 03:35:55 SkyScan query 03:35:56 SkyScan query done: ret=0 az=131.19<-8746 ze=-141.54<-21436 Statuses=0009 0008 03:35:56 Msec=3000 True Az=131.19 Ze=-141.54 Az status=0009 Ze status=0008 03:35:56 Check angles 03:35:56 SkyScan query 03:35:57 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:35:57 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:35:57 Message to Master queued w/err=0: serial=51804 error=0 03:36:02 Received message from Master: op=Filter serial=51805 03:36:02 Color wheel filter change from 0 to 0 03:36:02 FLIGetFilterPos err=0 currentPosition=0 03:36:02 FLIGetStepsRemaining err=0 RemainingSteps=0 03:36:02 Filter is already there-color wheel unchanged 03:36:02 Received message from Master: op=Shutter serial=51806 03:36:02 Shutter LASER close 03:36:02 Received message from Camera: op=State serial=51808 03:36:02 GetSingleValue result=40 Value=cccccccc 03:36:02 SkyScan query 03:36:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:36:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:02 Parameters OK 03:36:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:02 Set A/D data flow result=40 03:36:02 Set A/D channel type result=40 03:36:02 Set A/D encoding result=40 03:36:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:02 Set channel filter=0.000000e+000 result=40 03:36:02 Config A/D Result=40 03:36:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:02 Get A/D filter: -9.255963e+061 result=40 03:36:02 Get A/D value=-858993460 result=40 03:36:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:02 Parameters OK 03:36:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:02 Set A/D data flow result=40 03:36:02 Set A/D channel type result=40 03:36:02 Set A/D encoding result=40 03:36:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:02 Set channel filter=0.000000e+000 result=40 03:36:02 Config A/D Result=40 03:36:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:02 Get A/D filter: -9.255963e+061 result=40 03:36:02 Get A/D value=-858993460 result=40 03:36:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:02 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:36:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:36:02 Aux= 03:36:02 Message to Camera, serial 51808 queued 03:36:39 Received message from Master: op=PointingHead serial=51821 03:36:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:36:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:36:40 Point started: ret=0 03:36:40 point_skyscan result=0 03:36:40 Check angles 03:36:40 SkyScan query 03:36:41 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.435<-23429 Statuses=0009 0009 03:36:41 Msec=0 True Az=113.01 Ze=-171.435 Az status=0009 Ze status=0009 03:36:41 Check angles 03:36:41 SkyScan query 03:36:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:36:42 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:36:42 Message to Master queued w/err=0: serial=51821 error=0 03:36:47 Received message from Master: op=Filter serial=51822 03:36:47 Color wheel filter change from 0 to 0 03:36:47 FLIGetFilterPos err=0 currentPosition=0 03:36:47 FLIGetStepsRemaining err=0 RemainingSteps=0 03:36:47 Filter is already there-color wheel unchanged 03:36:47 Received message from Master: op=Shutter serial=51823 03:36:47 Shutter LASER open 03:36:47 Received message from Camera: op=State serial=51825 03:36:47 GetSingleValue result=40 Value=cccccccc 03:36:47 SkyScan query 03:36:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:36:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:48 Parameters OK 03:36:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:48 Set A/D data flow result=40 03:36:48 Set A/D channel type result=40 03:36:48 Set A/D encoding result=40 03:36:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:48 Set channel filter=0.000000e+000 result=40 03:36:48 Config A/D Result=40 03:36:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:48 Get A/D filter: -9.255963e+061 result=40 03:36:48 Get A/D value=-858993460 result=40 03:36:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:48 Parameters OK 03:36:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:48 Set A/D data flow result=40 03:36:48 Set A/D channel type result=40 03:36:48 Set A/D encoding result=40 03:36:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:48 Set channel filter=0.000000e+000 result=40 03:36:48 Config A/D Result=40 03:36:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:48 Get A/D filter: -9.255963e+061 result=40 03:36:48 Get A/D value=-858993460 result=40 03:36:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:36:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:36:48 Aux= 03:36:48 Message to Camera, serial 51825 queued 03:36:56 Received message from Master: op=Shutter serial=51835 03:36:56 Shutter LASER close 03:36:57 Received message from Master: op=PointingHead serial=51839 03:36:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:36:57 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:36:57 Point started: ret=0 03:36:57 point_skyscan result=0 03:36:58 Check angles 03:36:58 SkyScan query 03:36:58 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.43<-21562 Statuses=0009 0009 03:36:58 Msec=0 True Az=135.75 Ze=-143.43 Az status=0009 Ze status=0009 03:36:58 Check angles 03:36:58 SkyScan query 03:36:59 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.445<-20163 Statuses=0009 0009 03:36:59 Msec=750 True Az=153.36 Ze=-122.445 Az status=0009 Ze status=0009 03:36:59 Check angles 03:36:59 SkyScan query 03:37:00 SkyScan query done: ret=0 az=170.715<-11381 ze=-101.565<-18771 Statuses=0009 0009 03:37:00 Msec=1500 True Az=170.715 Ze=-101.565 Az status=0009 Ze status=0009 03:37:00 Check angles 03:37:00 SkyScan query 03:37:01 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.535<-17369 Statuses=0008 0009 03:37:01 Msec=2250 True Az=176.025 Ze=-80.535 Az status=0008 Ze status=0009 03:37:01 Check angles 03:37:01 SkyScan query 03:37:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.595<-15973 Statuses=0008 0009 03:37:01 Msec=3000 True Az=175.995 Ze=-59.595 Az status=0008 Ze status=0009 03:37:01 Check angles 03:37:01 SkyScan query 03:37:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:37:02 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:37:02 Message to Master queued w/err=0: serial=51839 error=0 03:37:07 Received message from Master: op=Filter serial=51840 03:37:07 Color wheel filter change from 0 to 0 03:37:07 FLIGetFilterPos err=0 currentPosition=0 03:37:07 FLIGetStepsRemaining err=0 RemainingSteps=0 03:37:07 Filter is already there-color wheel unchanged 03:37:07 Received message from Master: op=Shutter serial=51841 03:37:07 Shutter LASER close 03:37:07 Received message from Camera: op=State serial=51843 03:37:07 GetSingleValue result=40 Value=cccccccc 03:37:07 SkyScan query 03:37:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:37:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:08 Parameters OK 03:37:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:08 Set A/D data flow result=40 03:37:08 Set A/D channel type result=40 03:37:08 Set A/D encoding result=40 03:37:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:08 Set channel filter=0.000000e+000 result=40 03:37:08 Config A/D Result=40 03:37:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:08 Get A/D filter: -9.255963e+061 result=40 03:37:08 Get A/D value=-858993460 result=40 03:37:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:08 Parameters OK 03:37:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:08 Set A/D data flow result=40 03:37:08 Set A/D channel type result=40 03:37:08 Set A/D encoding result=40 03:37:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:08 Set channel filter=0.000000e+000 result=40 03:37:08 Config A/D Result=40 03:37:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:08 Get A/D filter: -9.255963e+061 result=40 03:37:08 Get A/D value=-858993460 result=40 03:37:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:37:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:37:08 Aux= 03:37:08 Message to Camera, serial 51843 queued 03:37:45 Received message from Master: op=PointingHead serial=51856 03:37:45 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:37:45 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:37:45 Point started: ret=0 03:37:45 point_skyscan result=0 03:37:46 Check angles 03:37:46 SkyScan query 03:37:46 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.72<-13448 Statuses=0009 0009 03:37:46 Msec=0 True Az=152.985 Ze=-21.72 Az status=0009 Ze status=0009 03:37:47 Check angles 03:37:47 SkyScan query 03:37:47 SkyScan query done: ret=0 az=135.48<-9032 ze=-0.705<-12047 Statuses=0009 0009 03:37:47 Msec=750 True Az=135.48 Ze=-0.705 Az status=0009 Ze status=0009 03:37:47 Check angles 03:37:47 SkyScan query 03:37:48 SkyScan query done: ret=0 az=117.99<-7866 ze=20.22<-10652 Statuses=0009 0009 03:37:48 Msec=1500 True Az=117.99 Ze=20.22 Az status=0009 Ze status=0009 03:37:48 Check angles 03:37:48 SkyScan query 03:37:49 SkyScan query done: ret=0 az=100.17<-6678 ze=41.625<-9225 Statuses=0009 0009 03:37:49 Msec=2250 True Az=100.17 Ze=41.625 Az status=0009 Ze status=0009 03:37:49 Check angles 03:37:49 SkyScan query 03:37:49 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 03:37:49 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 03:37:50 Check angles 03:37:50 SkyScan query 03:37:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:37:50 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:37:50 Message to Master queued w/err=0: serial=51856 error=0 03:37:55 Received message from Master: op=Filter serial=51857 03:37:55 Color wheel filter change from 0 to 0 03:37:55 FLIGetFilterPos err=0 currentPosition=0 03:37:55 FLIGetStepsRemaining err=0 RemainingSteps=0 03:37:55 Filter is already there-color wheel unchanged 03:37:55 Received message from Master: op=Shutter serial=51858 03:37:55 Shutter LASER close 03:37:55 Received message from Camera: op=State serial=51860 03:37:55 GetSingleValue result=40 Value=cccccccc 03:37:55 SkyScan query 03:37:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:37:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:56 Parameters OK 03:37:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:56 Set A/D data flow result=40 03:37:56 Set A/D channel type result=40 03:37:56 Set A/D encoding result=40 03:37:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:56 Set channel filter=0.000000e+000 result=40 03:37:56 Config A/D Result=40 03:37:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:56 Get A/D filter: -9.255963e+061 result=40 03:37:56 Get A/D value=-858993460 result=40 03:37:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:56 Parameters OK 03:37:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:56 Set A/D data flow result=40 03:37:56 Set A/D channel type result=40 03:37:56 Set A/D encoding result=40 03:37:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:56 Set channel filter=0.000000e+000 result=40 03:37:56 Config A/D Result=40 03:37:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:56 Get A/D filter: -9.255963e+061 result=40 03:37:56 Get A/D value=-858993460 result=40 03:37:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:37:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:37:56 Aux= 03:37:56 Message to Camera, serial 51860 queued 03:38:33 Received message from Master: op=PointingHead serial=51873 03:38:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:38:33 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:38:33 Point started: ret=0 03:38:33 point_skyscan result=0 03:38:34 Check angles 03:38:34 SkyScan query 03:38:35 SkyScan query done: ret=0 az=109.5<-7300 ze=38.49<-9434 Statuses=0009 0008 03:38:35 Msec=0 True Az=109.5 Ze=38.49 Az status=0009 Ze status=0008 03:38:35 Check angles 03:38:35 SkyScan query 03:38:35 SkyScan query done: ret=0 az=127.035<-8469 ze=38.505<-9433 Statuses=0009 0008 03:38:35 Msec=750 True Az=127.035 Ze=38.505 Az status=0009 Ze status=0008 03:38:36 Check angles 03:38:36 SkyScan query 03:38:36 SkyScan query done: ret=0 az=144.9<-9660 ze=38.505<-9433 Statuses=0009 0008 03:38:36 Msec=1500 True Az=144.9 Ze=38.505 Az status=0009 Ze status=0008 03:38:36 Check angles 03:38:36 SkyScan query 03:38:37 SkyScan query done: ret=0 az=162.285<-10819 ze=38.505<-9433 Statuses=0009 0008 03:38:37 Msec=2250 True Az=162.285 Ze=38.505 Az status=0009 Ze status=0008 03:38:37 Check angles 03:38:37 SkyScan query 03:38:38 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 03:38:38 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 03:38:38 Check angles 03:38:38 SkyScan query 03:38:38 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:38:38 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:38:38 Message to Master queued w/err=0: serial=51873 error=0 03:38:43 Received message from Master: op=Filter serial=51874 03:38:43 Color wheel filter change from 0 to 0 03:38:43 FLIGetFilterPos err=0 currentPosition=0 03:38:43 FLIGetStepsRemaining err=0 RemainingSteps=0 03:38:43 Filter is already there-color wheel unchanged 03:38:44 Received message from Master: op=Shutter serial=51875 03:38:44 Shutter LASER close 03:38:44 Received message from Camera: op=State serial=51877 03:38:44 GetSingleValue result=40 Value=cccccccc 03:38:44 SkyScan query 03:38:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:38:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:44 Parameters OK 03:38:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:44 Set A/D data flow result=40 03:38:44 Set A/D channel type result=40 03:38:44 Set A/D encoding result=40 03:38:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:44 Set channel filter=0.000000e+000 result=40 03:38:44 Config A/D Result=40 03:38:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:44 Get A/D filter: -9.255963e+061 result=40 03:38:44 Get A/D value=-858993460 result=40 03:38:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:44 Parameters OK 03:38:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:44 Set A/D data flow result=40 03:38:44 Set A/D channel type result=40 03:38:44 Set A/D encoding result=40 03:38:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:44 Set channel filter=0.000000e+000 result=40 03:38:44 Config A/D Result=40 03:38:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:44 Get A/D filter: -9.255963e+061 result=40 03:38:44 Get A/D value=-858993460 result=40 03:38:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:38:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:38:44 Aux= 03:38:44 Message to Camera, serial 51877 queued 03:39:21 Received message from Master: op=PointingHead serial=51890 03:39:21 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:39:21 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:39:21 Point started: ret=0 03:39:21 point_skyscan result=0 03:39:22 Check angles 03:39:22 SkyScan query 03:39:23 SkyScan query done: ret=0 az=153.12<-10208 ze=8.88<-11408 Statuses=0009 0009 03:39:23 Msec=0 True Az=153.12 Ze=8.88 Az status=0009 Ze status=0009 03:39:23 Check angles 03:39:23 SkyScan query 03:39:23 SkyScan query done: ret=0 az=135.705<-9047 ze=-12.06<-12804 Statuses=0009 0009 03:39:23 Msec=750 True Az=135.705 Ze=-12.06 Az status=0009 Ze status=0009 03:39:24 Check angles 03:39:24 SkyScan query 03:39:24 SkyScan query done: ret=0 az=118.17<-7878 ze=-33.015<-14201 Statuses=0009 0009 03:39:24 Msec=1500 True Az=118.17 Ze=-33.015 Az status=0009 Ze status=0009 03:39:24 Check angles 03:39:24 SkyScan query 03:39:25 SkyScan query done: ret=0 az=100.305<-6687 ze=-51.555<-15437 Statuses=0009 0009 03:39:25 Msec=2250 True Az=100.305 Ze=-51.555 Az status=0009 Ze status=0009 03:39:25 Check angles 03:39:25 SkyScan query 03:39:26 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.525<-15435 Statuses=0009 0008 03:39:26 Msec=3000 True Az=86.055 Ze=-51.525 Az status=0009 Ze status=0008 03:39:26 Check angles 03:39:26 SkyScan query 03:39:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:39:26 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:39:26 Message to Master queued w/err=0: serial=51890 error=0 03:39:31 Received message from Master: op=Filter serial=51891 03:39:31 Color wheel filter change from 0 to 0 03:39:31 FLIGetFilterPos err=0 currentPosition=0 03:39:31 FLIGetStepsRemaining err=0 RemainingSteps=0 03:39:31 Filter is already there-color wheel unchanged 03:39:32 Received message from Master: op=Shutter serial=51892 03:39:32 Shutter LASER close 03:39:32 Received message from Camera: op=State serial=51894 03:39:32 GetSingleValue result=40 Value=cccccccc 03:39:32 SkyScan query 03:39:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:39:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:32 Parameters OK 03:39:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:32 Set A/D data flow result=40 03:39:32 Set A/D channel type result=40 03:39:32 Set A/D encoding result=40 03:39:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:32 Set channel filter=0.000000e+000 result=40 03:39:32 Config A/D Result=40 03:39:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:32 Get A/D filter: -9.255963e+061 result=40 03:39:32 Get A/D value=-858993460 result=40 03:39:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:32 Parameters OK 03:39:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:32 Set A/D data flow result=40 03:39:32 Set A/D channel type result=40 03:39:32 Set A/D encoding result=40 03:39:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:32 Set channel filter=0.000000e+000 result=40 03:39:32 Config A/D Result=40 03:39:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:32 Get A/D filter: -9.255963e+061 result=40 03:39:32 Get A/D value=-858993460 result=40 03:39:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:39:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:39:32 Aux= 03:39:32 Message to Camera, serial 51894 queued 03:40:09 Received message from Master: op=PointingHead serial=51907 03:40:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:40:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:40:09 Point started: ret=0 03:40:09 point_skyscan result=0 03:40:10 Check angles 03:40:10 SkyScan query 03:40:11 SkyScan query done: ret=0 az=108.855<-7257 ze=-81.03<-17402 Statuses=0009 0009 03:40:11 Msec=0 True Az=108.855 Ze=-81.03 Az status=0009 Ze status=0009 03:40:11 Check angles 03:40:11 SkyScan query 03:40:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.015<-18801 Statuses=0008 0009 03:40:12 Msec=750 True Az=112.995 Ze=-102.015 Az status=0008 Ze status=0009 03:40:12 Check angles 03:40:12 SkyScan query 03:40:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.94<-20196 Statuses=0008 0009 03:40:12 Msec=1500 True Az=112.995 Ze=-122.94 Az status=0008 Ze status=0009 03:40:12 Check angles 03:40:12 SkyScan query 03:40:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.925<-21595 Statuses=0008 0009 03:40:13 Msec=2250 True Az=112.995 Ze=-143.925 Az status=0008 Ze status=0009 03:40:13 Check angles 03:40:13 SkyScan query 03:40:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.865<-22991 Statuses=0008 0009 03:40:14 Msec=3000 True Az=112.995 Ze=-164.865 Az status=0008 Ze status=0009 03:40:14 Check angles 03:40:14 SkyScan query 03:40:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:40:15 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:40:15 Message to Master queued w/err=0: serial=51907 error=0 03:40:20 Received message from Master: op=Filter serial=51908 03:40:20 Color wheel filter change from 0 to 0 03:40:20 FLIGetFilterPos err=0 currentPosition=0 03:40:20 FLIGetStepsRemaining err=0 RemainingSteps=0 03:40:20 Filter is already there-color wheel unchanged 03:40:20 Received message from Master: op=Shutter serial=51909 03:40:20 Shutter LASER open 03:40:20 Received message from Camera: op=State serial=51911 03:40:20 GetSingleValue result=40 Value=cccccccc 03:40:20 SkyScan query 03:40:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:40:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:20 Parameters OK 03:40:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:20 Set A/D data flow result=40 03:40:20 Set A/D channel type result=40 03:40:20 Set A/D encoding result=40 03:40:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:20 Set channel filter=0.000000e+000 result=40 03:40:20 Config A/D Result=40 03:40:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:20 Get A/D filter: -9.255963e+061 result=40 03:40:20 Get A/D value=-858993460 result=40 03:40:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:20 Parameters OK 03:40:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:20 Set A/D data flow result=40 03:40:20 Set A/D channel type result=40 03:40:20 Set A/D encoding result=40 03:40:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:20 Set channel filter=0.000000e+000 result=40 03:40:20 Config A/D Result=40 03:40:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:20 Get A/D filter: -9.255963e+061 result=40 03:40:20 Get A/D value=-858993460 result=40 03:40:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:40:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:40:20 Aux= 03:40:20 Message to Camera, serial 51911 queued 03:40:29 Received message from Master: op=Shutter serial=51921 03:40:29 Shutter LASER close 03:40:29 Received message from Master: op=PointingHead serial=51925 03:40:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:40:29 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:40:30 Point started: ret=0 03:40:30 point_skyscan result=0 03:40:30 Check angles 03:40:30 SkyScan query 03:40:31 SkyScan query done: ret=0 az=90.12<-6008 ze=157.53<-1498 Statuses=0009 0009 03:40:31 Msec=0 True Az=90.12 Ze=157.53 Az status=0009 Ze status=0009 03:40:31 Check angles 03:40:31 SkyScan query 03:40:32 SkyScan query done: ret=0 az=72.27<-4818 ze=136.11<-2926 Statuses=0009 0009 03:40:32 Msec=750 True Az=72.27 Ze=136.11 Az status=0009 Ze status=0009 03:40:32 Check angles 03:40:32 SkyScan query 03:40:33 SkyScan query done: ret=0 az=54.885<-3659 ze=115.185<-4321 Statuses=0009 0009 03:40:33 Msec=1500 True Az=54.885 Ze=115.185 Az status=0009 Ze status=0009 03:40:33 Check angles 03:40:33 SkyScan query 03:40:33 SkyScan query done: ret=0 az=40.86<-2724 ze=94.185<-5721 Statuses=0009 0009 03:40:33 Msec=2250 True Az=40.86 Ze=94.185 Az status=0009 Ze status=0009 03:40:33 Check angles 03:40:33 SkyScan query 03:40:34 SkyScan query done: ret=0 az=40.995<-2733 ze=73.245<-7117 Statuses=0008 0009 03:40:34 Msec=3000 True Az=40.995 Ze=73.245 Az status=0008 Ze status=0009 03:40:34 Check angles 03:40:34 SkyScan query 03:40:35 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 03:40:35 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 03:40:35 Check angles 03:40:35 SkyScan query 03:40:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:40:36 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:40:36 Message to Master queued w/err=0: serial=51925 error=0 03:40:41 Received message from Master: op=Filter serial=51926 03:40:41 Color wheel filter change from 0 to 0 03:40:41 FLIGetFilterPos err=0 currentPosition=0 03:40:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:40:41 Filter is already there-color wheel unchanged 03:40:41 Received message from Master: op=Shutter serial=51927 03:40:41 Shutter LASER close 03:40:41 Received message from Camera: op=State serial=51929 03:40:41 GetSingleValue result=40 Value=cccccccc 03:40:41 SkyScan query 03:40:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:40:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:41 Parameters OK 03:40:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:41 Set A/D data flow result=40 03:40:41 Set A/D channel type result=40 03:40:41 Set A/D encoding result=40 03:40:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:41 Set channel filter=0.000000e+000 result=40 03:40:41 Config A/D Result=40 03:40:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:41 Get A/D filter: -9.255963e+061 result=40 03:40:41 Get A/D value=-858993460 result=40 03:40:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:41 Parameters OK 03:40:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:41 Set A/D data flow result=40 03:40:41 Set A/D channel type result=40 03:40:41 Set A/D encoding result=40 03:40:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:41 Set channel filter=0.000000e+000 result=40 03:40:41 Config A/D Result=40 03:40:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:41 Get A/D filter: -9.255963e+061 result=40 03:40:41 Get A/D value=-858993460 result=40 03:40:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:40:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:40:41 Aux= 03:40:41 Message to Camera, serial 51929 queued 03:41:18 Received message from Master: op=PointingHead serial=51942 03:41:18 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:41:18 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:41:19 Point started: ret=0 03:41:19 point_skyscan result=0 03:41:19 Check angles 03:41:19 SkyScan query 03:41:20 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 03:41:20 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 03:41:20 Check angles 03:41:20 SkyScan query 03:41:21 SkyScan query done: ret=0 az=81.99<-5466 ze=66.495<-7567 Statuses=0009 0008 03:41:21 Msec=750 True Az=81.99 Ze=66.495 Az status=0009 Ze status=0008 03:41:21 Check angles 03:41:21 SkyScan query 03:41:22 SkyScan query done: ret=0 az=99.645<-6643 ze=66.495<-7567 Statuses=0009 0008 03:41:22 Msec=1500 True Az=99.645 Ze=66.495 Az status=0009 Ze status=0008 03:41:22 Check angles 03:41:22 SkyScan query 03:41:22 SkyScan query done: ret=0 az=117.09<-7806 ze=66.495<-7567 Statuses=0009 0008 03:41:22 Msec=2250 True Az=117.09 Ze=66.495 Az status=0009 Ze status=0008 03:41:22 Check angles 03:41:22 SkyScan query 03:41:23 SkyScan query done: ret=0 az=134.565<-8971 ze=66.495<-7567 Statuses=0009 0008 03:41:23 Msec=3000 True Az=134.565 Ze=66.495 Az status=0009 Ze status=0008 03:41:23 Check angles 03:41:23 SkyScan query 03:41:24 SkyScan query done: ret=0 az=152.04<-10136 ze=66.495<-7567 Statuses=0009 0008 03:41:24 Msec=3750 True Az=152.04 Ze=66.495 Az status=0009 Ze status=0008 03:41:24 Check angles 03:41:24 SkyScan query 03:41:25 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:41:25 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 03:41:25 Message to Master queued w/err=0: serial=51942 error=0 03:41:30 Received message from Master: op=Filter serial=51943 03:41:30 Color wheel filter change from 0 to 0 03:41:30 FLIGetFilterPos err=0 currentPosition=0 03:41:30 FLIGetStepsRemaining err=0 RemainingSteps=0 03:41:30 Filter is already there-color wheel unchanged 03:41:30 Received message from Master: op=Shutter serial=51944 03:41:30 Shutter LASER close 03:41:30 Received message from Camera: op=State serial=51946 03:41:30 GetSingleValue result=40 Value=cccccccc 03:41:30 SkyScan query 03:41:30 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:41:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:30 Parameters OK 03:41:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:30 Set A/D data flow result=40 03:41:30 Set A/D channel type result=40 03:41:30 Set A/D encoding result=40 03:41:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:30 Set channel filter=0.000000e+000 result=40 03:41:30 Config A/D Result=40 03:41:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:30 Get A/D filter: -9.255963e+061 result=40 03:41:30 Get A/D value=-858993460 result=40 03:41:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:30 Parameters OK 03:41:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:30 Set A/D data flow result=40 03:41:30 Set A/D channel type result=40 03:41:30 Set A/D encoding result=40 03:41:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:30 Set channel filter=0.000000e+000 result=40 03:41:30 Config A/D Result=40 03:41:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:30 Get A/D filter: -9.255963e+061 result=40 03:41:30 Get A/D value=-858993460 result=40 03:41:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:30 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:41:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:41:30 Aux= 03:41:30 Message to Camera, serial 51946 queued 03:42:07 Received message from Master: op=PointingHead serial=51959 03:42:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:42:07 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:42:08 Point started: ret=0 03:42:08 point_skyscan result=0 03:42:08 Check angles 03:42:08 SkyScan query 03:42:09 SkyScan query done: ret=0 az=135.165<-9011 ze=36.795<-9547 Statuses=0009 0009 03:42:09 Msec=0 True Az=135.165 Ze=36.795 Az status=0009 Ze status=0009 03:42:09 Check angles 03:42:09 SkyScan query 03:42:10 SkyScan query done: ret=0 az=117.6<-7840 ze=15.84<-10944 Statuses=0009 0009 03:42:10 Msec=750 True Az=117.6 Ze=15.84 Az status=0009 Ze status=0009 03:42:10 Check angles 03:42:10 SkyScan query 03:42:10 SkyScan query done: ret=0 az=100.305<-6687 ze=-5.22<-12348 Statuses=0009 0009 03:42:10 Msec=1500 True Az=100.305 Ze=-5.22 Az status=0009 Ze status=0009 03:42:11 Check angles 03:42:11 SkyScan query 03:42:11 SkyScan query done: ret=0 az=82.41<-5494 ze=-26.49<-13766 Statuses=0009 0009 03:42:11 Msec=2250 True Az=82.41 Ze=-26.49 Az status=0009 Ze status=0009 03:42:11 Check angles 03:42:11 SkyScan query 03:42:12 SkyScan query done: ret=0 az=64.8<-4320 ze=-38.565<-14571 Statuses=0009 0008 03:42:12 Msec=3000 True Az=64.8 Ze=-38.565 Az status=0009 Ze status=0008 03:42:12 Check angles 03:42:12 SkyScan query 03:42:13 SkyScan query done: ret=0 az=47.115<-3141 ze=-38.535<-14569 Statuses=0009 0008 03:42:13 Msec=3750 True Az=47.115 Ze=-38.535 Az status=0009 Ze status=0008 03:42:13 Check angles 03:42:13 SkyScan query 03:42:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:42:13 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 03:42:13 Message to Master queued w/err=0: serial=51959 error=0 03:42:18 Received message from Master: op=Filter serial=51960 03:42:18 Color wheel filter change from 0 to 0 03:42:18 FLIGetFilterPos err=0 currentPosition=0 03:42:18 FLIGetStepsRemaining err=0 RemainingSteps=0 03:42:18 Filter is already there-color wheel unchanged 03:42:19 Received message from Master: op=Shutter serial=51961 03:42:19 Shutter LASER close 03:42:19 Received message from Camera: op=State serial=51963 03:42:19 GetSingleValue result=40 Value=cccccccc 03:42:19 SkyScan query 03:42:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:42:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:19 Parameters OK 03:42:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:19 Set A/D data flow result=40 03:42:19 Set A/D channel type result=40 03:42:19 Set A/D encoding result=40 03:42:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:19 Set channel filter=0.000000e+000 result=40 03:42:19 Config A/D Result=40 03:42:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:19 Get A/D filter: -9.255963e+061 result=40 03:42:19 Get A/D value=-858993460 result=40 03:42:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:19 Parameters OK 03:42:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:19 Set A/D data flow result=40 03:42:19 Set A/D channel type result=40 03:42:19 Set A/D encoding result=40 03:42:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:19 Set channel filter=0.000000e+000 result=40 03:42:19 Config A/D Result=40 03:42:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:19 Get A/D filter: -9.255963e+061 result=40 03:42:19 Get A/D value=-858993460 result=40 03:42:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:42:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:42:19 Aux= 03:42:19 Message to Camera, serial 51963 queued 03:42:56 Received message from Master: op=PointingHead serial=51976 03:42:56 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:42:56 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:42:56 Point started: ret=0 03:42:56 point_skyscan result=0 03:42:57 Check angles 03:42:57 SkyScan query 03:42:58 SkyScan query done: ret=0 az=64.62<-4308 ze=-68.745<-16583 Statuses=0009 0009 03:42:58 Msec=0 True Az=64.62 Ze=-68.745 Az status=0009 Ze status=0009 03:42:58 Check angles 03:42:58 SkyScan query 03:42:58 SkyScan query done: ret=0 az=82.035<-5469 ze=-89.715<-17981 Statuses=0009 0009 03:42:58 Msec=750 True Az=82.035 Ze=-89.715 Az status=0009 Ze status=0009 03:42:59 Check angles 03:42:59 SkyScan query 03:42:59 SkyScan query done: ret=0 az=99.66<-6644 ze=-110.67<-19378 Statuses=0009 0009 03:42:59 Msec=1500 True Az=99.66 Ze=-110.67 Az status=0009 Ze status=0009 03:42:59 Check angles 03:42:59 SkyScan query 03:43:00 SkyScan query done: ret=0 az=117.42<-7828 ze=-132.03<-20802 Statuses=0009 0009 03:43:00 Msec=2250 True Az=117.42 Ze=-132.03 Az status=0009 Ze status=0009 03:43:00 Check angles 03:43:00 SkyScan query 03:43:01 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 03:43:01 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 03:43:01 Check angles 03:43:01 SkyScan query 03:43:01 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:43:01 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:43:01 Message to Master queued w/err=0: serial=51976 error=0 03:43:06 Received message from Master: op=Filter serial=51977 03:43:06 Color wheel filter change from 0 to 0 03:43:06 FLIGetFilterPos err=0 currentPosition=0 03:43:06 FLIGetStepsRemaining err=0 RemainingSteps=0 03:43:06 Filter is already there-color wheel unchanged 03:43:07 Received message from Master: op=Shutter serial=51978 03:43:07 Shutter LASER close 03:43:07 Received message from Camera: op=State serial=51980 03:43:07 GetSingleValue result=40 Value=cccccccc 03:43:07 SkyScan query 03:43:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:43:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:07 Parameters OK 03:43:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:07 Set A/D data flow result=40 03:43:07 Set A/D channel type result=40 03:43:07 Set A/D encoding result=40 03:43:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:07 Set channel filter=0.000000e+000 result=40 03:43:07 Config A/D Result=40 03:43:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:07 Get A/D filter: -9.255963e+061 result=40 03:43:07 Get A/D value=-858993460 result=40 03:43:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:07 Parameters OK 03:43:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:07 Set A/D data flow result=40 03:43:07 Set A/D channel type result=40 03:43:07 Set A/D encoding result=40 03:43:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:07 Set channel filter=0.000000e+000 result=40 03:43:07 Config A/D Result=40 03:43:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:07 Get A/D filter: -9.255963e+061 result=40 03:43:07 Get A/D value=-858993460 result=40 03:43:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:43:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:43:07 Aux= 03:43:07 Message to Camera, serial 51980 queued 03:43:44 Received message from Master: op=PointingHead serial=51993 03:43:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:43:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:43:45 Point started: ret=0 03:43:45 point_skyscan result=0 03:43:45 Check angles 03:43:45 SkyScan query 03:43:46 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.105<-23407 Statuses=0009 0009 03:43:46 Msec=0 True Az=113.01 Ze=-171.105 Az status=0009 Ze status=0009 03:43:46 Check angles 03:43:46 SkyScan query 03:43:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:43:47 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:43:47 Message to Master queued w/err=0: serial=51993 error=0 03:43:52 Received message from Master: op=Filter serial=51994 03:43:52 Color wheel filter change from 0 to 0 03:43:52 FLIGetFilterPos err=0 currentPosition=0 03:43:52 FLIGetStepsRemaining err=0 RemainingSteps=0 03:43:52 Filter is already there-color wheel unchanged 03:43:52 Received message from Master: op=Shutter serial=51995 03:43:52 Shutter LASER open 03:43:52 Received message from Camera: op=State serial=51997 03:43:52 GetSingleValue result=40 Value=cccccccc 03:43:52 SkyScan query 03:43:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:43:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:53 Parameters OK 03:43:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:53 Set A/D data flow result=40 03:43:53 Set A/D channel type result=40 03:43:53 Set A/D encoding result=40 03:43:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:53 Set channel filter=0.000000e+000 result=40 03:43:53 Config A/D Result=40 03:43:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:53 Get A/D filter: -9.255963e+061 result=40 03:43:53 Get A/D value=-858993460 result=40 03:43:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:53 Parameters OK 03:43:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:53 Set A/D data flow result=40 03:43:53 Set A/D channel type result=40 03:43:53 Set A/D encoding result=40 03:43:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:53 Set channel filter=0.000000e+000 result=40 03:43:53 Config A/D Result=40 03:43:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:53 Get A/D filter: -9.255963e+061 result=40 03:43:53 Get A/D value=-858993460 result=40 03:43:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:43:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:43:53 Aux= 03:43:53 Message to Camera, serial 51997 queued 03:44:01 Received message from Master: op=Shutter serial=52007 03:44:01 Shutter LASER close 03:44:02 Received message from Master: op=PointingHead serial=52011 03:44:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:44:02 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:44:02 Point started: ret=0 03:44:02 point_skyscan result=0 03:44:03 Check angles 03:44:03 SkyScan query 03:44:03 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.535<-21569 Statuses=0009 0009 03:44:03 Msec=0 True Az=135.72 Ze=-143.535 Az status=0009 Ze status=0009 03:44:03 Check angles 03:44:03 SkyScan query 03:44:04 SkyScan query done: ret=0 az=153.165<-10211 ze=-122.595<-20173 Statuses=0009 0009 03:44:04 Msec=750 True Az=153.165 Ze=-122.595 Az status=0009 Ze status=0009 03:44:04 Check angles 03:44:04 SkyScan query 03:44:05 SkyScan query done: ret=0 az=170.985<-11399 ze=-101.22<-18748 Statuses=0009 0009 03:44:05 Msec=1500 True Az=170.985 Ze=-101.22 Az status=0009 Ze status=0009 03:44:05 Check angles 03:44:05 SkyScan query 03:44:06 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.815<-17321 Statuses=0008 0009 03:44:06 Msec=2250 True Az=176.025 Ze=-79.815 Az status=0008 Ze status=0009 03:44:06 Check angles 03:44:06 SkyScan query 03:44:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.83<-15922 Statuses=0008 0009 03:44:06 Msec=3000 True Az=175.995 Ze=-58.83 Az status=0008 Ze status=0009 03:44:06 Check angles 03:44:06 SkyScan query 03:44:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:44:07 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:44:07 Message to Master queued w/err=0: serial=52011 error=0 03:44:12 Received message from Master: op=Filter serial=52012 03:44:12 Color wheel filter change from 0 to 0 03:44:12 FLIGetFilterPos err=0 currentPosition=0 03:44:12 FLIGetStepsRemaining err=0 RemainingSteps=0 03:44:12 Filter is already there-color wheel unchanged 03:44:12 Received message from Master: op=Shutter serial=52013 03:44:12 Shutter LASER close 03:44:12 Received message from Camera: op=State serial=52015 03:44:12 GetSingleValue result=40 Value=cccccccc 03:44:12 SkyScan query 03:44:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:44:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:13 Parameters OK 03:44:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:13 Set A/D data flow result=40 03:44:13 Set A/D channel type result=40 03:44:13 Set A/D encoding result=40 03:44:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:13 Set channel filter=0.000000e+000 result=40 03:44:13 Config A/D Result=40 03:44:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:13 Get A/D filter: -9.255963e+061 result=40 03:44:13 Get A/D value=-858993460 result=40 03:44:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:13 Parameters OK 03:44:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:13 Set A/D data flow result=40 03:44:13 Set A/D channel type result=40 03:44:13 Set A/D encoding result=40 03:44:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:13 Set channel filter=0.000000e+000 result=40 03:44:13 Config A/D Result=40 03:44:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:13 Get A/D filter: -9.255963e+061 result=40 03:44:13 Get A/D value=-858993460 result=40 03:44:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:44:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:44:13 Aux= 03:44:13 Message to Camera, serial 52015 queued 03:44:50 Received message from Master: op=PointingHead serial=52028 03:44:50 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:44:50 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:44:50 Point started: ret=0 03:44:50 point_skyscan result=0 03:44:51 Check angles 03:44:51 SkyScan query 03:44:51 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.69<-13446 Statuses=0009 0009 03:44:51 Msec=0 True Az=152.94 Ze=-21.69 Az status=0009 Ze status=0009 03:44:52 Check angles 03:44:52 SkyScan query 03:44:52 SkyScan query done: ret=0 az=135.525<-9035 ze=-0.705<-12047 Statuses=0009 0009 03:44:52 Msec=750 True Az=135.525 Ze=-0.705 Az status=0009 Ze status=0009 03:44:52 Check angles 03:44:52 SkyScan query 03:44:53 SkyScan query done: ret=0 az=117.81<-7854 ze=20.235<-10651 Statuses=0009 0009 03:44:53 Msec=1500 True Az=117.81 Ze=20.235 Az status=0009 Ze status=0009 03:44:53 Check angles 03:44:53 SkyScan query 03:44:54 SkyScan query done: ret=0 az=100.335<-6689 ze=41.19<-9254 Statuses=0009 0009 03:44:54 Msec=2250 True Az=100.335 Ze=41.19 Az status=0009 Ze status=0009 03:44:54 Check angles 03:44:54 SkyScan query 03:44:54 SkyScan query done: ret=0 az=86.04<-5736 ze=51.555<-8563 Statuses=0009 0008 03:44:54 Msec=3000 True Az=86.04 Ze=51.555 Az status=0009 Ze status=0008 03:44:55 Check angles 03:44:55 SkyScan query 03:44:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:44:55 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:44:55 Message to Master queued w/err=0: serial=52028 error=0 03:45:00 Received message from Master: op=Filter serial=52029 03:45:00 Color wheel filter change from 0 to 0 03:45:00 FLIGetFilterPos err=0 currentPosition=0 03:45:00 FLIGetStepsRemaining err=0 RemainingSteps=0 03:45:00 Filter is already there-color wheel unchanged 03:45:00 Received message from Master: op=Shutter serial=52030 03:45:00 Shutter LASER close 03:45:00 Received message from Camera: op=State serial=52032 03:45:00 GetSingleValue result=40 Value=cccccccc 03:45:00 SkyScan query 03:45:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:45:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:01 Parameters OK 03:45:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:01 Set A/D data flow result=40 03:45:01 Set A/D channel type result=40 03:45:01 Set A/D encoding result=40 03:45:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:01 Set channel filter=0.000000e+000 result=40 03:45:01 Config A/D Result=40 03:45:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:01 Get A/D filter: -9.255963e+061 result=40 03:45:01 Get A/D value=-858993460 result=40 03:45:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:01 Parameters OK 03:45:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:01 Set A/D data flow result=40 03:45:01 Set A/D channel type result=40 03:45:01 Set A/D encoding result=40 03:45:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:01 Set channel filter=0.000000e+000 result=40 03:45:01 Config A/D Result=40 03:45:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:01 Get A/D filter: -9.255963e+061 result=40 03:45:01 Get A/D value=-858993460 result=40 03:45:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:45:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:45:01 Aux= 03:45:01 Message to Camera, serial 52032 queued 03:45:29 Received message from Master: op=Identify serial=52033 03:45:38 Received message from Master: op=PointingHead serial=52048 03:45:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:45:38 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:45:38 Point started: ret=0 03:45:38 point_skyscan result=0 03:45:39 Check angles 03:45:39 SkyScan query 03:45:39 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 03:45:39 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 03:45:40 Check angles 03:45:40 SkyScan query 03:45:40 SkyScan query done: ret=0 az=126.525<-8435 ze=38.505<-9433 Statuses=0009 0008 03:45:40 Msec=750 True Az=126.525 Ze=38.505 Az status=0009 Ze status=0008 03:45:40 Check angles 03:45:40 SkyScan query 03:45:41 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 03:45:41 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 03:45:41 Check angles 03:45:41 SkyScan query 03:45:42 SkyScan query done: ret=0 az=162.06<-10804 ze=38.505<-9433 Statuses=0009 0008 03:45:42 Msec=2250 True Az=162.06 Ze=38.505 Az status=0009 Ze status=0008 03:45:42 Check angles 03:45:42 SkyScan query 03:45:43 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 03:45:43 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 03:45:43 Check angles 03:45:43 SkyScan query 03:45:43 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:45:43 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:45:43 Message to Master queued w/err=0: serial=52048 error=0 03:45:48 Received message from Master: op=Filter serial=52049 03:45:48 Color wheel filter change from 0 to 0 03:45:48 FLIGetFilterPos err=0 currentPosition=0 03:45:48 FLIGetStepsRemaining err=0 RemainingSteps=0 03:45:48 Filter is already there-color wheel unchanged [UTC 2018-12-11 03:45:48] 03:45:48 Received message from Master: op=Shutter serial=52050 03:45:48 Shutter LASER close 03:45:48 Received message from Camera: op=State serial=52052 03:45:48 GetSingleValue result=40 Value=cccccccc 03:45:48 SkyScan query 03:45:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:45:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:49 Parameters OK 03:45:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:49 Set A/D data flow result=40 03:45:49 Set A/D channel type result=40 03:45:49 Set A/D encoding result=40 03:45:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:49 Set channel filter=0.000000e+000 result=40 03:45:49 Config A/D Result=40 03:45:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:49 Get A/D filter: -9.255963e+061 result=40 03:45:49 Get A/D value=-858993460 result=40 03:45:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:49 Parameters OK 03:45:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:49 Set A/D data flow result=40 03:45:49 Set A/D channel type result=40 03:45:49 Set A/D encoding result=40 03:45:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:49 Set channel filter=0.000000e+000 result=40 03:45:49 Config A/D Result=40 03:45:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:49 Get A/D filter: -9.255963e+061 result=40 03:45:49 Get A/D value=-858993460 result=40 03:45:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:45:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:45:49 Aux= 03:45:49 Message to Camera, serial 52052 queued 03:46:26 Received message from Master: op=PointingHead serial=52065 03:46:26 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:46:26 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:46:26 Point started: ret=0 03:46:26 point_skyscan result=0 03:46:27 Check angles 03:46:27 SkyScan query 03:46:28 SkyScan query done: ret=0 az=153.18<-10212 ze=8.955<-11403 Statuses=0009 0009 03:46:28 Msec=0 True Az=153.18 Ze=8.955 Az status=0009 Ze status=0009 03:46:28 Check angles 03:46:28 SkyScan query 03:46:28 SkyScan query done: ret=0 az=135.75<-9050 ze=-12<-12800 Statuses=0009 0009 03:46:28 Msec=750 True Az=135.75 Ze=-12 Az status=0009 Ze status=0009 03:46:28 Check angles 03:46:28 SkyScan query 03:46:29 SkyScan query done: ret=0 az=118.2<-7880 ze=-32.91<-14194 Statuses=0009 0009 03:46:29 Msec=1500 True Az=118.2 Ze=-32.91 Az status=0009 Ze status=0009 03:46:29 Check angles 03:46:29 SkyScan query 03:46:30 SkyScan query done: ret=0 az=100.305<-6687 ze=-51.54<-15436 Statuses=0009 0009 03:46:30 Msec=2250 True Az=100.305 Ze=-51.54 Az status=0009 Ze status=0009 03:46:30 Check angles 03:46:30 SkyScan query 03:46:31 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.525<-15435 Statuses=0009 0008 03:46:31 Msec=3000 True Az=86.04 Ze=-51.525 Az status=0009 Ze status=0008 03:46:31 Check angles 03:46:31 SkyScan query 03:46:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:46:31 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:46:31 Message to Master queued w/err=0: serial=52065 error=0 03:46:36 Received message from Master: op=Filter serial=52066 03:46:36 Color wheel filter change from 0 to 0 03:46:36 FLIGetFilterPos err=0 currentPosition=0 03:46:36 FLIGetStepsRemaining err=0 RemainingSteps=0 03:46:36 Filter is already there-color wheel unchanged 03:46:37 Received message from Master: op=Shutter serial=52067 03:46:37 Shutter LASER close 03:46:37 Received message from Camera: op=State serial=52069 03:46:37 GetSingleValue result=40 Value=cccccccc 03:46:37 SkyScan query 03:46:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:46:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:37 Parameters OK 03:46:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:37 Set A/D data flow result=40 03:46:37 Set A/D channel type result=40 03:46:37 Set A/D encoding result=40 03:46:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:37 Set channel filter=0.000000e+000 result=40 03:46:37 Config A/D Result=40 03:46:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:37 Get A/D filter: -9.255963e+061 result=40 03:46:37 Get A/D value=-858993460 result=40 03:46:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:37 Parameters OK 03:46:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:37 Set A/D data flow result=40 03:46:37 Set A/D channel type result=40 03:46:37 Set A/D encoding result=40 03:46:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:37 Set channel filter=0.000000e+000 result=40 03:46:37 Config A/D Result=40 03:46:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:37 Get A/D filter: -9.255963e+061 result=40 03:46:37 Get A/D value=-858993460 result=40 03:46:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:46:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:46:37 Aux= 03:46:37 Message to Camera, serial 52069 queued 03:47:14 Received message from Master: op=PointingHead serial=52082 03:47:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:47:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:47:14 Point started: ret=0 03:47:14 point_skyscan result=0 03:47:15 Check angles 03:47:15 SkyScan query 03:47:16 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.075<-17405 Statuses=0009 0009 03:47:16 Msec=0 True Az=108.99 Ze=-81.075 Az status=0009 Ze status=0009 03:47:16 Check angles 03:47:16 SkyScan query 03:47:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.525<-18835 Statuses=0008 0009 03:47:16 Msec=750 True Az=112.995 Ze=-102.525 Az status=0008 Ze status=0009 03:47:17 Check angles 03:47:17 SkyScan query 03:47:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 03:47:17 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 03:47:17 Check angles 03:47:17 SkyScan query 03:47:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.39<-21626 Statuses=0008 0009 03:47:18 Msec=2250 True Az=112.995 Ze=-144.39 Az status=0008 Ze status=0009 03:47:18 Check angles 03:47:18 SkyScan query 03:47:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.75<-23050 Statuses=0008 0009 03:47:19 Msec=3000 True Az=112.995 Ze=-165.75 Az status=0008 Ze status=0009 03:47:19 Check angles 03:47:19 SkyScan query 03:47:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:47:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:47:19 Message to Master queued w/err=0: serial=52082 error=0 03:47:24 Received message from Master: op=Filter serial=52083 03:47:24 Color wheel filter change from 0 to 0 03:47:24 FLIGetFilterPos err=0 currentPosition=0 03:47:24 FLIGetStepsRemaining err=0 RemainingSteps=0 03:47:24 Filter is already there-color wheel unchanged 03:47:25 Received message from Master: op=Shutter serial=52084 03:47:25 Shutter LASER open 03:47:25 Received message from Camera: op=State serial=52086 03:47:25 GetSingleValue result=40 Value=cccccccc 03:47:25 SkyScan query 03:47:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:47:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:25 Parameters OK 03:47:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:25 Set A/D data flow result=40 03:47:25 Set A/D channel type result=40 03:47:25 Set A/D encoding result=40 03:47:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:25 Set channel filter=0.000000e+000 result=40 03:47:25 Config A/D Result=40 03:47:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:25 Get A/D filter: -9.255963e+061 result=40 03:47:25 Get A/D value=-858993460 result=40 03:47:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:25 Parameters OK 03:47:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:25 Set A/D data flow result=40 03:47:25 Set A/D channel type result=40 03:47:25 Set A/D encoding result=40 03:47:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:25 Set channel filter=0.000000e+000 result=40 03:47:25 Config A/D Result=40 03:47:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:25 Get A/D filter: -9.255963e+061 result=40 03:47:25 Get A/D value=-858993460 result=40 03:47:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:47:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:47:25 Aux= 03:47:25 Message to Camera, serial 52086 queued 03:47:34 Received message from Master: op=Shutter serial=52096 03:47:34 Shutter LASER close 03:47:34 Received message from Master: op=PointingHead serial=52100 03:47:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:47:34 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:47:35 Point started: ret=0 03:47:35 point_skyscan result=0 03:47:35 Check angles 03:47:35 SkyScan query 03:47:36 SkyScan query done: ret=0 az=89.91<-5994 ze=157.305<-1513 Statuses=0009 0009 03:47:36 Msec=0 True Az=89.91 Ze=157.305 Az status=0009 Ze status=0009 03:47:36 Check angles 03:47:36 SkyScan query 03:47:37 SkyScan query done: ret=0 az=72.03<-4802 ze=135.9<-2940 Statuses=0009 0009 03:47:37 Msec=750 True Az=72.03 Ze=135.9 Az status=0009 Ze status=0009 03:47:37 Check angles 03:47:37 SkyScan query 03:47:37 SkyScan query done: ret=0 az=54.42<-3628 ze=114.495<-4367 Statuses=0009 0009 03:47:37 Msec=1500 True Az=54.42 Ze=114.495 Az status=0009 Ze status=0009 03:47:38 Check angles 03:47:38 SkyScan query 03:47:38 SkyScan query done: ret=0 az=40.95<-2730 ze=93.57<-5762 Statuses=0009 0009 03:47:38 Msec=2250 True Az=40.95 Ze=93.57 Az status=0009 Ze status=0009 03:47:38 Check angles 03:47:38 SkyScan query 03:47:39 SkyScan query done: ret=0 az=40.995<-2733 ze=72.585<-7161 Statuses=0008 0009 03:47:39 Msec=3000 True Az=40.995 Ze=72.585 Az status=0008 Ze status=0009 03:47:39 Check angles 03:47:39 SkyScan query 03:47:40 SkyScan query done: ret=0 az=40.995<-2733 ze=52.35<-8510 Statuses=0008 0009 03:47:40 Msec=3750 True Az=40.995 Ze=52.35 Az status=0008 Ze status=0009 03:47:40 Check angles 03:47:40 SkyScan query 03:47:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:47:40 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:47:40 Message to Master queued w/err=0: serial=52100 error=0 03:47:45 Received message from Master: op=Filter serial=52101 03:47:45 Color wheel filter change from 0 to 0 03:47:45 FLIGetFilterPos err=0 currentPosition=0 03:47:45 FLIGetStepsRemaining err=0 RemainingSteps=0 03:47:45 Filter is already there-color wheel unchanged 03:47:46 Received message from Master: op=Shutter serial=52102 03:47:46 Shutter LASER close 03:47:46 Received message from Camera: op=State serial=52104 03:47:46 GetSingleValue result=40 Value=cccccccc 03:47:46 SkyScan query 03:47:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:47:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:46 Parameters OK 03:47:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:46 Set A/D data flow result=40 03:47:46 Set A/D channel type result=40 03:47:46 Set A/D encoding result=40 03:47:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:46 Set channel filter=0.000000e+000 result=40 03:47:46 Config A/D Result=40 03:47:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:46 Get A/D filter: -9.255963e+061 result=40 03:47:46 Get A/D value=-858993460 result=40 03:47:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:46 Parameters OK 03:47:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:46 Set A/D data flow result=40 03:47:46 Set A/D channel type result=40 03:47:46 Set A/D encoding result=40 03:47:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:46 Set channel filter=0.000000e+000 result=40 03:47:46 Config A/D Result=40 03:47:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:46 Get A/D filter: -9.255963e+061 result=40 03:47:46 Get A/D value=-858993460 result=40 03:47:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:47:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:47:46 Aux= 03:47:46 Message to Camera, serial 52104 queued 03:48:22 Received message from Master: op=PointingHead serial=52116 03:48:22 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:48:22 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:48:23 Point started: ret=0 03:48:23 point_skyscan result=0 03:48:23 Check angles 03:48:23 SkyScan query 03:48:24 SkyScan query done: ret=0 az=64.425<-4295 ze=66.555<-7563 Statuses=0009 0008 03:48:24 Msec=0 True Az=64.425 Ze=66.555 Az status=0009 Ze status=0008 03:48:24 Check angles 03:48:24 SkyScan query 03:48:25 SkyScan query done: ret=0 az=82.275<-5485 ze=66.495<-7567 Statuses=0009 0008 03:48:25 Msec=750 True Az=82.275 Ze=66.495 Az status=0009 Ze status=0008 03:48:25 Check angles 03:48:25 SkyScan query 03:48:25 SkyScan query done: ret=0 az=99.72<-6648 ze=66.495<-7567 Statuses=0009 0008 03:48:25 Msec=1500 True Az=99.72 Ze=66.495 Az status=0009 Ze status=0008 03:48:26 Check angles 03:48:26 SkyScan query 03:48:26 SkyScan query done: ret=0 az=117.645<-7843 ze=66.495<-7567 Statuses=0009 0008 03:48:26 Msec=2250 True Az=117.645 Ze=66.495 Az status=0009 Ze status=0008 03:48:26 Check angles 03:48:26 SkyScan query 03:48:27 SkyScan query done: ret=0 az=135.225<-9015 ze=66.495<-7567 Statuses=0009 0008 03:48:27 Msec=3000 True Az=135.225 Ze=66.495 Az status=0009 Ze status=0008 03:48:27 Check angles 03:48:27 SkyScan query 03:48:28 SkyScan query done: ret=0 az=152.46<-10164 ze=66.495<-7567 Statuses=0009 0008 03:48:28 Msec=3750 True Az=152.46 Ze=66.495 Az status=0009 Ze status=0008 03:48:28 Check angles 03:48:28 SkyScan query 03:48:28 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 03:48:28 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 03:48:28 Message to Master queued w/err=0: serial=52116 error=0 03:48:33 Received message from Master: op=Filter serial=52117 03:48:33 Color wheel filter change from 0 to 0 03:48:33 FLIGetFilterPos err=0 currentPosition=0 03:48:33 FLIGetStepsRemaining err=0 RemainingSteps=0 03:48:33 Filter is already there-color wheel unchanged 03:48:34 Received message from Master: op=Shutter serial=52118 03:48:34 Shutter LASER close 03:48:34 Received message from Camera: op=State serial=52120 03:48:34 GetSingleValue result=40 Value=cccccccc 03:48:34 SkyScan query 03:48:34 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:48:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:34 Parameters OK 03:48:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:34 Set A/D data flow result=40 03:48:34 Set A/D channel type result=40 03:48:34 Set A/D encoding result=40 03:48:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:34 Set channel filter=0.000000e+000 result=40 03:48:34 Config A/D Result=40 03:48:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:34 Get A/D filter: -9.255963e+061 result=40 03:48:34 Get A/D value=-858993460 result=40 03:48:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:34 Parameters OK 03:48:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:34 Set A/D data flow result=40 03:48:34 Set A/D channel type result=40 03:48:34 Set A/D encoding result=40 03:48:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:34 Set channel filter=0.000000e+000 result=40 03:48:34 Config A/D Result=40 03:48:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:34 Get A/D filter: -9.255963e+061 result=40 03:48:34 Get A/D value=-858993460 result=40 03:48:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:34 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:48:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:48:34 Aux= 03:48:34 Message to Camera, serial 52120 queued 03:49:11 Received message from Master: op=PointingHead serial=52133 03:49:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:49:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:49:11 Point started: ret=0 03:49:11 point_skyscan result=0 03:49:12 Check angles 03:49:12 SkyScan query 03:49:13 SkyScan query done: ret=0 az=134.835<-8989 ze=36.645<-9557 Statuses=0009 0009 03:49:13 Msec=0 True Az=134.835 Ze=36.645 Az status=0009 Ze status=0009 03:49:13 Check angles 03:49:13 SkyScan query 03:49:14 SkyScan query done: ret=0 az=117.465<-7831 ze=15.675<-10955 Statuses=0009 0009 03:49:14 Msec=750 True Az=117.465 Ze=15.675 Az status=0009 Ze status=0009 03:49:14 Check angles 03:49:14 SkyScan query 03:49:14 SkyScan query done: ret=0 az=100.095<-6673 ze=-5.28<-12352 Statuses=0009 0009 03:49:14 Msec=1500 True Az=100.095 Ze=-5.28 Az status=0009 Ze status=0009 03:49:14 Check angles 03:49:14 SkyScan query 03:49:15 SkyScan query done: ret=0 az=82.56<-5504 ze=-26.235<-13749 Statuses=0009 0009 03:49:15 Msec=2250 True Az=82.56 Ze=-26.235 Az status=0009 Ze status=0009 03:49:15 Check angles 03:49:15 SkyScan query 03:49:16 SkyScan query done: ret=0 az=65.145<-4343 ze=-38.58<-14572 Statuses=0009 0008 03:49:16 Msec=3000 True Az=65.145 Ze=-38.58 Az status=0009 Ze status=0008 03:49:16 Check angles 03:49:16 SkyScan query 03:49:17 SkyScan query done: ret=0 az=47.64<-3176 ze=-38.52<-14568 Statuses=0009 0008 03:49:17 Msec=3750 True Az=47.64 Ze=-38.52 Az status=0009 Ze status=0008 03:49:17 Check angles 03:49:17 SkyScan query 03:49:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:49:17 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 03:49:17 Message to Master queued w/err=0: serial=52133 error=0 03:49:22 Received message from Master: op=Filter serial=52134 03:49:22 Color wheel filter change from 0 to 0 03:49:22 FLIGetFilterPos err=0 currentPosition=0 03:49:22 FLIGetStepsRemaining err=0 RemainingSteps=0 03:49:22 Filter is already there-color wheel unchanged 03:49:22 Received message from Master: op=Shutter serial=52135 03:49:22 Shutter LASER close 03:49:23 Received message from Camera: op=State serial=52137 03:49:23 GetSingleValue result=40 Value=cccccccc 03:49:23 SkyScan query 03:49:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:49:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:23 Parameters OK 03:49:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:23 Set A/D data flow result=40 03:49:23 Set A/D channel type result=40 03:49:23 Set A/D encoding result=40 03:49:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:23 Set channel filter=0.000000e+000 result=40 03:49:23 Config A/D Result=40 03:49:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:23 Get A/D filter: -9.255963e+061 result=40 03:49:23 Get A/D value=-858993460 result=40 03:49:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:23 Parameters OK 03:49:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:23 Set A/D data flow result=40 03:49:23 Set A/D channel type result=40 03:49:23 Set A/D encoding result=40 03:49:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:23 Set channel filter=0.000000e+000 result=40 03:49:23 Config A/D Result=40 03:49:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:23 Get A/D filter: -9.255963e+061 result=40 03:49:23 Get A/D value=-858993460 result=40 03:49:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:49:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:49:23 Aux= 03:49:23 Message to Camera, serial 52137 queued 03:50:00 Received message from Master: op=PointingHead serial=52150 03:50:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:50:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:50:00 Point started: ret=0 03:50:00 point_skyscan result=0 03:50:01 Check angles 03:50:01 SkyScan query 03:50:02 SkyScan query done: ret=0 az=64.05<-4270 ze=-68.31<-16554 Statuses=0009 0009 03:50:02 Msec=0 True Az=64.05 Ze=-68.31 Az status=0009 Ze status=0009 03:50:02 Check angles 03:50:02 SkyScan query 03:50:02 SkyScan query done: ret=0 az=81.645<-5443 ze=-89.28<-17952 Statuses=0009 0009 03:50:02 Msec=750 True Az=81.645 Ze=-89.28 Az status=0009 Ze status=0009 03:50:03 Check angles 03:50:03 SkyScan query 03:50:03 SkyScan query done: ret=0 az=99.15<-6610 ze=-110.235<-19349 Statuses=0009 0009 03:50:03 Msec=1500 True Az=99.15 Ze=-110.235 Az status=0009 Ze status=0009 03:50:03 Check angles 03:50:03 SkyScan query 03:50:04 SkyScan query done: ret=0 az=116.61<-7774 ze=-131.19<-20746 Statuses=0009 0009 03:50:04 Msec=2250 True Az=116.61 Ze=-131.19 Az status=0009 Ze status=0009 03:50:04 Check angles 03:50:04 SkyScan query 03:50:05 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 03:50:05 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 03:50:05 Check angles 03:50:05 SkyScan query 03:50:05 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:50:05 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:50:05 Message to Master queued w/err=0: serial=52150 error=0 03:50:10 Received message from Master: op=Filter serial=52151 03:50:10 Color wheel filter change from 0 to 0 03:50:10 FLIGetFilterPos err=0 currentPosition=0 03:50:10 FLIGetStepsRemaining err=0 RemainingSteps=0 03:50:10 Filter is already there-color wheel unchanged 03:50:11 Received message from Master: op=Shutter serial=52152 03:50:11 Shutter LASER close 03:50:11 Received message from Camera: op=State serial=52154 03:50:11 GetSingleValue result=40 Value=cccccccc 03:50:11 SkyScan query 03:50:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:50:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:11 Parameters OK 03:50:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:11 Set A/D data flow result=40 03:50:11 Set A/D channel type result=40 03:50:11 Set A/D encoding result=40 03:50:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:11 Set channel filter=0.000000e+000 result=40 03:50:11 Config A/D Result=40 03:50:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:11 Get A/D filter: -9.255963e+061 result=40 03:50:11 Get A/D value=-858993460 result=40 03:50:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:11 Parameters OK 03:50:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:11 Set A/D data flow result=40 03:50:11 Set A/D channel type result=40 03:50:11 Set A/D encoding result=40 03:50:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:11 Set channel filter=0.000000e+000 result=40 03:50:11 Config A/D Result=40 03:50:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:11 Get A/D filter: -9.255963e+061 result=40 03:50:11 Get A/D value=-858993460 result=40 03:50:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:50:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:50:11 Aux= 03:50:11 Message to Camera, serial 52154 queued 03:50:48 Received message from Master: op=PointingHead serial=52167 03:50:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:50:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:50:48 Point started: ret=0 03:50:48 point_skyscan result=0 03:50:49 Check angles 03:50:49 SkyScan query 03:50:50 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.06<-23404 Statuses=0009 0009 03:50:50 Msec=0 True Az=113.01 Ze=-171.06 Az status=0009 Ze status=0009 03:50:50 Check angles 03:50:50 SkyScan query 03:50:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:50:50 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:50:50 Message to Master queued w/err=0: serial=52167 error=0 03:50:55 Received message from Master: op=Filter serial=52168 03:50:55 Color wheel filter change from 0 to 0 03:50:55 FLIGetFilterPos err=0 currentPosition=0 03:50:55 FLIGetStepsRemaining err=0 RemainingSteps=0 03:50:55 Filter is already there-color wheel unchanged 03:50:56 Received message from Master: op=Shutter serial=52169 03:50:56 Shutter LASER open 03:50:56 Received message from Camera: op=State serial=52171 03:50:56 GetSingleValue result=40 Value=cccccccc 03:50:56 SkyScan query 03:50:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:50:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:56 Parameters OK 03:50:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:56 Set A/D data flow result=40 03:50:56 Set A/D channel type result=40 03:50:56 Set A/D encoding result=40 03:50:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:56 Set channel filter=0.000000e+000 result=40 03:50:56 Config A/D Result=40 03:50:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:56 Get A/D filter: -9.255963e+061 result=40 03:50:56 Get A/D value=-858993460 result=40 03:50:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:56 Parameters OK 03:50:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:56 Set A/D data flow result=40 03:50:56 Set A/D channel type result=40 03:50:56 Set A/D encoding result=40 03:50:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:56 Set channel filter=0.000000e+000 result=40 03:50:56 Config A/D Result=40 03:50:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:56 Get A/D filter: -9.255963e+061 result=40 03:50:56 Get A/D value=-858993460 result=40 03:50:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:50:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:50:56 Aux= 03:50:56 Message to Camera, serial 52171 queued 03:51:05 Received message from Master: op=Shutter serial=52181 03:51:05 Shutter LASER close 03:51:05 Received message from Master: op=PointingHead serial=52185 03:51:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:51:05 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:51:06 Point started: ret=0 03:51:06 point_skyscan result=0 03:51:06 Check angles 03:51:06 SkyScan query 03:51:07 SkyScan query done: ret=0 az=136.005<-9067 ze=-143.085<-21539 Statuses=0009 0009 03:51:07 Msec=0 True Az=136.005 Ze=-143.085 Az status=0009 Ze status=0009 03:51:07 Check angles 03:51:07 SkyScan query 03:51:08 SkyScan query done: ret=0 az=153.885<-10259 ze=-121.665<-20111 Statuses=0009 0009 03:51:08 Msec=750 True Az=153.885 Ze=-121.665 Az status=0009 Ze status=0009 03:51:08 Check angles 03:51:08 SkyScan query 03:51:09 SkyScan query done: ret=0 az=171.435<-11429 ze=-100.68<-18712 Statuses=0009 0009 03:51:09 Msec=1500 True Az=171.435 Ze=-100.68 Az status=0009 Ze status=0009 03:51:09 Check angles 03:51:09 SkyScan query 03:51:09 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.785<-17319 Statuses=0008 0009 03:51:09 Msec=2250 True Az=176.025 Ze=-79.785 Az status=0008 Ze status=0009 03:51:09 Check angles 03:51:09 SkyScan query 03:51:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.785<-15919 Statuses=0008 0009 03:51:10 Msec=3000 True Az=176.01 Ze=-58.785 Az status=0008 Ze status=0009 03:51:10 Check angles 03:51:10 SkyScan query 03:51:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 03:51:11 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 03:51:11 Message to Master queued w/err=0: serial=52185 error=0 03:51:16 Received message from Master: op=Filter serial=52186 03:51:16 Color wheel filter change from 0 to 0 03:51:16 FLIGetFilterPos err=0 currentPosition=0 03:51:16 FLIGetStepsRemaining err=0 RemainingSteps=0 03:51:16 Filter is already there-color wheel unchanged 03:51:16 Received message from Master: op=Shutter serial=52187 03:51:16 Shutter LASER close 03:51:16 Received message from Camera: op=State serial=52189 03:51:16 GetSingleValue result=40 Value=cccccccc 03:51:16 SkyScan query 03:51:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:51:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:17 Parameters OK 03:51:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:17 Set A/D data flow result=40 03:51:17 Set A/D channel type result=40 03:51:17 Set A/D encoding result=40 03:51:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:17 Set channel filter=0.000000e+000 result=40 03:51:17 Config A/D Result=40 03:51:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:17 Get A/D filter: -9.255963e+061 result=40 03:51:17 Get A/D value=-858993460 result=40 03:51:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:17 Parameters OK 03:51:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:17 Set A/D data flow result=40 03:51:17 Set A/D channel type result=40 03:51:17 Set A/D encoding result=40 03:51:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:17 Set channel filter=0.000000e+000 result=40 03:51:17 Config A/D Result=40 03:51:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:17 Get A/D filter: -9.255963e+061 result=40 03:51:17 Get A/D value=-858993460 result=40 03:51:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:51:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:51:17 Aux= 03:51:17 Message to Camera, serial 52189 queued 03:51:54 Received message from Master: op=PointingHead serial=52202 03:51:54 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:51:54 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:51:54 Point started: ret=0 03:51:54 point_skyscan result=0 03:51:55 Check angles 03:51:55 SkyScan query 03:51:55 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.78<-13452 Statuses=0009 0009 03:51:55 Msec=0 True Az=152.985 Ze=-21.78 Az status=0009 Ze status=0009 03:51:55 Check angles 03:51:55 SkyScan query 03:51:56 SkyScan query done: ret=0 az=135.225<-9015 ze=-0.345<-12023 Statuses=0009 0009 03:51:56 Msec=750 True Az=135.225 Ze=-0.345 Az status=0009 Ze status=0009 03:51:56 Check angles 03:51:56 SkyScan query 03:51:57 SkyScan query done: ret=0 az=117.525<-7835 ze=20.595<-10627 Statuses=0009 0009 03:51:57 Msec=1500 True Az=117.525 Ze=20.595 Az status=0009 Ze status=0009 03:51:57 Check angles 03:51:57 SkyScan query 03:51:57 SkyScan query done: ret=0 az=99.885<-6659 ze=42<-9200 Statuses=0009 0009 03:51:57 Msec=2250 True Az=99.885 Ze=42 Az status=0009 Ze status=0009 03:51:58 Check angles 03:51:58 SkyScan query 03:51:58 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 03:51:58 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 03:51:58 Check angles 03:51:58 SkyScan query 03:51:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:51:59 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:51:59 Message to Master queued w/err=0: serial=52202 error=0 03:52:04 Received message from Master: op=Filter serial=52203 03:52:04 Color wheel filter change from 0 to 0 03:52:04 FLIGetFilterPos err=0 currentPosition=0 03:52:04 FLIGetStepsRemaining err=0 RemainingSteps=0 03:52:04 Filter is already there-color wheel unchanged 03:52:04 Received message from Master: op=Shutter serial=52204 03:52:04 Shutter LASER close 03:52:04 Received message from Camera: op=State serial=52206 03:52:04 GetSingleValue result=40 Value=cccccccc 03:52:04 SkyScan query 03:52:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:52:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:05 Parameters OK 03:52:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:05 Set A/D data flow result=40 03:52:05 Set A/D channel type result=40 03:52:05 Set A/D encoding result=40 03:52:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:05 Set channel filter=0.000000e+000 result=40 03:52:05 Config A/D Result=40 03:52:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:05 Get A/D filter: -9.255963e+061 result=40 03:52:05 Get A/D value=-858993460 result=40 03:52:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:05 Parameters OK 03:52:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:05 Set A/D data flow result=40 03:52:05 Set A/D channel type result=40 03:52:05 Set A/D encoding result=40 03:52:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:05 Set channel filter=0.000000e+000 result=40 03:52:05 Config A/D Result=40 03:52:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:05 Get A/D filter: -9.255963e+061 result=40 03:52:05 Get A/D value=-858993460 result=40 03:52:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:52:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:52:05 Aux= 03:52:05 Message to Camera, serial 52206 queued 03:52:42 Received message from Master: op=PointingHead serial=52219 03:52:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:52:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:52:42 Point started: ret=0 03:52:42 point_skyscan result=0 03:52:43 Check angles 03:52:43 SkyScan query 03:52:43 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 03:52:43 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 03:52:44 Check angles 03:52:44 SkyScan query 03:52:44 SkyScan query done: ret=0 az=126.825<-8455 ze=38.505<-9433 Statuses=0009 0008 03:52:44 Msec=750 True Az=126.825 Ze=38.505 Az status=0009 Ze status=0008 03:52:44 Check angles 03:52:44 SkyScan query 03:52:45 SkyScan query done: ret=0 az=144.57<-9638 ze=38.505<-9433 Statuses=0009 0008 03:52:45 Msec=1500 True Az=144.57 Ze=38.505 Az status=0009 Ze status=0008 03:52:45 Check angles 03:52:45 SkyScan query 03:52:46 SkyScan query done: ret=0 az=162.12<-10808 ze=38.505<-9433 Statuses=0009 0008 03:52:46 Msec=2250 True Az=162.12 Ze=38.505 Az status=0009 Ze status=0008 03:52:46 Check angles 03:52:46 SkyScan query 03:52:46 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 03:52:46 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 03:52:47 Check angles 03:52:47 SkyScan query 03:52:47 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:52:47 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:52:47 Message to Master queued w/err=0: serial=52219 error=0 03:52:52 Received message from Master: op=Filter serial=52220 03:52:52 Color wheel filter change from 0 to 0 03:52:52 FLIGetFilterPos err=0 currentPosition=0 03:52:52 FLIGetStepsRemaining err=0 RemainingSteps=0 03:52:52 Filter is already there-color wheel unchanged 03:52:52 Received message from Master: op=Shutter serial=52221 03:52:52 Shutter LASER close 03:52:52 Received message from Camera: op=State serial=52223 03:52:52 GetSingleValue result=40 Value=cccccccc 03:52:52 SkyScan query 03:52:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:52:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:53 Parameters OK 03:52:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:53 Set A/D data flow result=40 03:52:53 Set A/D channel type result=40 03:52:53 Set A/D encoding result=40 03:52:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:53 Set channel filter=0.000000e+000 result=40 03:52:53 Config A/D Result=40 03:52:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:53 Get A/D filter: -9.255963e+061 result=40 03:52:53 Get A/D value=-858993460 result=40 03:52:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:53 Parameters OK 03:52:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:53 Set A/D data flow result=40 03:52:53 Set A/D channel type result=40 03:52:53 Set A/D encoding result=40 03:52:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:53 Set channel filter=0.000000e+000 result=40 03:52:53 Config A/D Result=40 03:52:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:53 Get A/D filter: -9.255963e+061 result=40 03:52:53 Get A/D value=-858993460 result=40 03:52:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:52:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:52:53 Aux= 03:52:53 Message to Camera, serial 52223 queued 03:53:30 Received message from Master: op=PointingHead serial=52236 03:53:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:53:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:53:30 Point started: ret=0 03:53:30 point_skyscan result=0 03:53:31 Check angles 03:53:31 SkyScan query 03:53:31 SkyScan query done: ret=0 az=153.12<-10208 ze=8.805<-11413 Statuses=0009 0009 03:53:31 Msec=0 True Az=153.12 Ze=8.805 Az status=0009 Ze status=0009 03:53:32 Check angles 03:53:32 SkyScan query 03:53:32 SkyScan query done: ret=0 az=135.66<-9044 ze=-12.165<-12811 Statuses=0009 0009 03:53:32 Msec=750 True Az=135.66 Ze=-12.165 Az status=0009 Ze status=0009 03:53:32 Check angles 03:53:32 SkyScan query 03:53:33 SkyScan query done: ret=0 az=118.095<-7873 ze=-33.09<-14206 Statuses=0009 0009 03:53:33 Msec=1500 True Az=118.095 Ze=-33.09 Az status=0009 Ze status=0009 03:53:33 Check angles 03:53:33 SkyScan query 03:53:34 SkyScan query done: ret=0 az=100.605<-6707 ze=-51.51<-15434 Statuses=0009 0009 03:53:34 Msec=2250 True Az=100.605 Ze=-51.51 Az status=0009 Ze status=0009 03:53:34 Check angles 03:53:34 SkyScan query 03:53:34 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 03:53:34 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 03:53:35 Check angles 03:53:35 SkyScan query 03:53:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:53:35 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:53:35 Message to Master queued w/err=0: serial=52236 error=0 03:53:40 Received message from Master: op=Filter serial=52237 03:53:40 Color wheel filter change from 0 to 0 03:53:40 FLIGetFilterPos err=0 currentPosition=0 03:53:40 FLIGetStepsRemaining err=0 RemainingSteps=0 03:53:40 Filter is already there-color wheel unchanged 03:53:40 Received message from Master: op=Shutter serial=52238 03:53:40 Shutter LASER close 03:53:40 Received message from Camera: op=State serial=52240 03:53:40 GetSingleValue result=40 Value=cccccccc 03:53:40 SkyScan query 03:53:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:53:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:41 Parameters OK 03:53:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:41 Set A/D data flow result=40 03:53:41 Set A/D channel type result=40 03:53:41 Set A/D encoding result=40 03:53:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:41 Set channel filter=0.000000e+000 result=40 03:53:41 Config A/D Result=40 03:53:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:41 Get A/D filter: -9.255963e+061 result=40 03:53:41 Get A/D value=-858993460 result=40 03:53:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:41 Parameters OK 03:53:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:41 Set A/D data flow result=40 03:53:41 Set A/D channel type result=40 03:53:41 Set A/D encoding result=40 03:53:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:41 Set channel filter=0.000000e+000 result=40 03:53:41 Config A/D Result=40 03:53:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:41 Get A/D filter: -9.255963e+061 result=40 03:53:41 Get A/D value=-858993460 result=40 03:53:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:53:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:53:41 Aux= 03:53:41 Message to Camera, serial 52240 queued 03:54:18 Received message from Master: op=PointingHead serial=52253 03:54:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:54:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:54:18 Point started: ret=0 03:54:18 point_skyscan result=0 03:54:19 Check angles 03:54:19 SkyScan query 03:54:19 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.795<-17453 Statuses=0009 0009 03:54:19 Msec=0 True Az=109.395 Ze=-81.795 Az status=0009 Ze status=0009 03:54:20 Check angles 03:54:20 SkyScan query 03:54:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.17<-18878 Statuses=0008 0009 03:54:20 Msec=750 True Az=112.995 Ze=-103.17 Az status=0008 Ze status=0009 03:54:20 Check angles 03:54:20 SkyScan query 03:54:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.11<-20274 Statuses=0008 0009 03:54:21 Msec=1500 True Az=112.995 Ze=-124.11 Az status=0008 Ze status=0009 03:54:21 Check angles 03:54:21 SkyScan query 03:54:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.065<-21671 Statuses=0008 0009 03:54:22 Msec=2250 True Az=112.995 Ze=-145.065 Az status=0008 Ze status=0009 03:54:22 Check angles 03:54:22 SkyScan query 03:54:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.02<-23068 Statuses=0008 0009 03:54:23 Msec=3000 True Az=112.995 Ze=-166.02 Az status=0008 Ze status=0009 03:54:23 Check angles 03:54:23 SkyScan query 03:54:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 03:54:23 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 03:54:23 Message to Master queued w/err=0: serial=52253 error=0 03:54:28 Received message from Master: op=Filter serial=52254 03:54:28 Color wheel filter change from 0 to 0 03:54:28 FLIGetFilterPos err=0 currentPosition=0 03:54:28 FLIGetStepsRemaining err=0 RemainingSteps=0 03:54:28 Filter is already there-color wheel unchanged 03:54:28 Received message from Master: op=Shutter serial=52255 03:54:28 Shutter LASER open 03:54:29 Received message from Camera: op=State serial=52257 03:54:29 GetSingleValue result=40 Value=cccccccc 03:54:29 SkyScan query 03:54:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:54:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:29 Parameters OK 03:54:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:29 Set A/D data flow result=40 03:54:29 Set A/D channel type result=40 03:54:29 Set A/D encoding result=40 03:54:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:29 Set channel filter=0.000000e+000 result=40 03:54:29 Config A/D Result=40 03:54:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:29 Get A/D filter: -9.255963e+061 result=40 03:54:29 Get A/D value=-858993460 result=40 03:54:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:29 Parameters OK 03:54:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:29 Set A/D data flow result=40 03:54:29 Set A/D channel type result=40 03:54:29 Set A/D encoding result=40 03:54:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:29 Set channel filter=0.000000e+000 result=40 03:54:29 Config A/D Result=40 03:54:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:29 Get A/D filter: -9.255963e+061 result=40 03:54:29 Get A/D value=-858993460 result=40 03:54:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:54:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:54:29 Aux= 03:54:29 Message to Camera, serial 52257 queued 03:54:38 Received message from Master: op=Shutter serial=52267 03:54:38 Shutter LASER close 03:54:38 Received message from Master: op=PointingHead serial=52271 03:54:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:54:38 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:54:38 Point started: ret=0 03:54:38 point_skyscan result=0 03:54:39 Check angles 03:54:39 SkyScan query 03:54:40 SkyScan query done: ret=0 az=89.865<-5991 ze=157.14<-1524 Statuses=0009 0009 03:54:40 Msec=0 True Az=89.865 Ze=157.14 Az status=0009 Ze status=0009 03:54:40 Check angles 03:54:40 SkyScan query 03:54:40 SkyScan query done: ret=0 az=72.345<-4823 ze=136.185<-2921 Statuses=0009 0009 03:54:40 Msec=750 True Az=72.345 Ze=136.185 Az status=0009 Ze status=0009 03:54:41 Check angles 03:54:41 SkyScan query 03:54:41 SkyScan query done: ret=0 az=54.72<-3648 ze=114.765<-4349 Statuses=0009 0009 03:54:41 Msec=1500 True Az=54.72 Ze=114.765 Az status=0009 Ze status=0009 03:54:41 Check angles 03:54:41 SkyScan query 03:54:42 SkyScan query done: ret=0 az=40.905<-2727 ze=93.84<-5744 Statuses=0009 0009 03:54:42 Msec=2250 True Az=40.905 Ze=93.84 Az status=0009 Ze status=0009 03:54:42 Check angles 03:54:42 SkyScan query 03:54:43 SkyScan query done: ret=0 az=40.995<-2733 ze=72.855<-7143 Statuses=0008 0009 03:54:43 Msec=3000 True Az=40.995 Ze=72.855 Az status=0008 Ze status=0009 03:54:43 Check angles 03:54:43 SkyScan query 03:54:43 SkyScan query done: ret=0 az=40.995<-2733 ze=52.26<-8516 Statuses=0008 0009 03:54:43 Msec=3750 True Az=40.995 Ze=52.26 Az status=0008 Ze status=0009 03:54:44 Check angles 03:54:44 SkyScan query 03:54:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:54:44 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:54:44 Message to Master queued w/err=0: serial=52271 error=0 03:54:49 Received message from Master: op=Filter serial=52272 03:54:49 Color wheel filter change from 0 to 0 03:54:49 FLIGetFilterPos err=0 currentPosition=0 03:54:49 FLIGetStepsRemaining err=0 RemainingSteps=0 03:54:49 Filter is already there-color wheel unchanged 03:54:49 Received message from Master: op=Shutter serial=52273 03:54:49 Shutter LASER close 03:54:50 Received message from Camera: op=State serial=52275 03:54:50 GetSingleValue result=40 Value=cccccccc 03:54:50 SkyScan query 03:54:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:54:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:50 Parameters OK 03:54:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:50 Set A/D data flow result=40 03:54:50 Set A/D channel type result=40 03:54:50 Set A/D encoding result=40 03:54:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:50 Set channel filter=0.000000e+000 result=40 03:54:50 Config A/D Result=40 03:54:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:50 Get A/D filter: -9.255963e+061 result=40 03:54:50 Get A/D value=-858993460 result=40 03:54:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:50 Parameters OK 03:54:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:50 Set A/D data flow result=40 03:54:50 Set A/D channel type result=40 03:54:50 Set A/D encoding result=40 03:54:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:50 Set channel filter=0.000000e+000 result=40 03:54:50 Config A/D Result=40 03:54:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:50 Get A/D filter: -9.255963e+061 result=40 03:54:50 Get A/D value=-858993460 result=40 03:54:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:54:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:54:50 Aux= 03:54:50 Message to Camera, serial 52275 queued 03:55:27 Received message from Master: op=PointingHead serial=52288 03:55:27 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:55:27 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:55:27 Point started: ret=0 03:55:27 point_skyscan result=0 03:55:28 Check angles 03:55:28 SkyScan query 03:55:29 SkyScan query done: ret=0 az=64.515<-4301 ze=66.555<-7563 Statuses=0009 0008 03:55:29 Msec=0 True Az=64.515 Ze=66.555 Az status=0009 Ze status=0008 03:55:29 Check angles 03:55:29 SkyScan query 03:55:29 SkyScan query done: ret=0 az=81.915<-5461 ze=66.495<-7567 Statuses=0009 0008 03:55:29 Msec=750 True Az=81.915 Ze=66.495 Az status=0009 Ze status=0008 03:55:30 Check angles 03:55:30 SkyScan query 03:55:30 SkyScan query done: ret=0 az=99.915<-6661 ze=66.495<-7567 Statuses=0009 0008 03:55:30 Msec=1500 True Az=99.915 Ze=66.495 Az status=0009 Ze status=0008 03:55:30 Check angles 03:55:30 SkyScan query 03:55:31 SkyScan query done: ret=0 az=117.42<-7828 ze=66.495<-7567 Statuses=0009 0008 03:55:31 Msec=2250 True Az=117.42 Ze=66.495 Az status=0009 Ze status=0008 03:55:31 Check angles 03:55:31 SkyScan query 03:55:32 SkyScan query done: ret=0 az=134.835<-8989 ze=66.495<-7567 Statuses=0009 0008 03:55:32 Msec=3000 True Az=134.835 Ze=66.495 Az status=0009 Ze status=0008 03:55:32 Check angles 03:55:32 SkyScan query 03:55:32 SkyScan query done: ret=0 az=152.625<-10175 ze=66.495<-7567 Statuses=0009 0008 03:55:32 Msec=3750 True Az=152.625 Ze=66.495 Az status=0009 Ze status=0008 03:55:33 Check angles 03:55:33 SkyScan query 03:55:33 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 03:55:33 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 03:55:33 Message to Master queued w/err=0: serial=52288 error=0 [UTC 2018-12-11 03:55:38] 03:55:38 Received message from Master: op=Filter serial=52289 03:55:38 Color wheel filter change from 0 to 0 03:55:38 FLIGetFilterPos err=0 currentPosition=0 03:55:38 FLIGetStepsRemaining err=0 RemainingSteps=0 03:55:38 Filter is already there-color wheel unchanged 03:55:38 Received message from Master: op=Shutter serial=52290 03:55:38 Shutter LASER close 03:55:39 Received message from Camera: op=State serial=52292 03:55:39 GetSingleValue result=40 Value=cccccccc 03:55:39 SkyScan query 03:55:39 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:55:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:39 Parameters OK 03:55:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:39 Set A/D data flow result=40 03:55:39 Set A/D channel type result=40 03:55:39 Set A/D encoding result=40 03:55:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:39 Set channel filter=0.000000e+000 result=40 03:55:39 Config A/D Result=40 03:55:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:39 Get A/D filter: -9.255963e+061 result=40 03:55:39 Get A/D value=-858993460 result=40 03:55:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:39 Parameters OK 03:55:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:39 Set A/D data flow result=40 03:55:39 Set A/D channel type result=40 03:55:39 Set A/D encoding result=40 03:55:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:39 Set channel filter=0.000000e+000 result=40 03:55:39 Config A/D Result=40 03:55:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:39 Get A/D filter: -9.255963e+061 result=40 03:55:39 Get A/D value=-858993460 result=40 03:55:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:39 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:55:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:55:39 Aux= 03:55:39 Message to Camera, serial 52292 queued [UTC 2018-12-11 03:55:54] 03:56:16 Received message from Master: op=PointingHead serial=52305 03:56:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:56:16 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:56:16 Point started: ret=0 03:56:16 point_skyscan result=0 03:56:17 Check angles 03:56:17 SkyScan query 03:56:18 SkyScan query done: ret=0 az=135.09<-9006 ze=36.87<-9542 Statuses=0009 0009 03:56:18 Msec=0 True Az=135.09 Ze=36.87 Az status=0009 Ze status=0009 03:56:18 Check angles 03:56:18 SkyScan query 03:56:18 SkyScan query done: ret=0 az=117.555<-7837 ze=15.915<-10939 Statuses=0009 0009 03:56:18 Msec=750 True Az=117.555 Ze=15.915 Az status=0009 Ze status=0009 03:56:19 Check angles 03:56:19 SkyScan query 03:56:19 SkyScan query done: ret=0 az=100.2<-6680 ze=-5.04<-12336 Statuses=0009 0009 03:56:19 Msec=1500 True Az=100.2 Ze=-5.04 Az status=0009 Ze status=0009 03:56:19 Check angles 03:56:19 SkyScan query 03:56:20 SkyScan query done: ret=0 az=82.725<-5515 ze=-26.01<-13734 Statuses=0009 0009 03:56:20 Msec=2250 True Az=82.725 Ze=-26.01 Az status=0009 Ze status=0009 03:56:20 Check angles 03:56:20 SkyScan query 03:56:21 SkyScan query done: ret=0 az=64.845<-4323 ze=-38.58<-14572 Statuses=0009 0008 03:56:21 Msec=3000 True Az=64.845 Ze=-38.58 Az status=0009 Ze status=0008 03:56:21 Check angles 03:56:21 SkyScan query 03:56:21 SkyScan query done: ret=0 az=47.37<-3158 ze=-38.52<-14568 Statuses=0009 0008 03:56:21 Msec=3750 True Az=47.37 Ze=-38.52 Az status=0009 Ze status=0008 03:56:22 Check angles 03:56:22 SkyScan query 03:56:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:56:22 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 03:56:22 Message to Master queued w/err=0: serial=52305 error=0 03:56:27 Received message from Master: op=Filter serial=52306 03:56:27 Color wheel filter change from 0 to 0 03:56:27 FLIGetFilterPos err=0 currentPosition=0 03:56:27 FLIGetStepsRemaining err=0 RemainingSteps=0 03:56:27 Filter is already there-color wheel unchanged 03:56:27 Received message from Master: op=Shutter serial=52307 03:56:27 Shutter LASER close 03:56:27 Received message from Camera: op=State serial=52309 03:56:27 GetSingleValue result=40 Value=cccccccc 03:56:27 SkyScan query 03:56:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:56:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:28 Parameters OK 03:56:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:28 Set A/D data flow result=40 03:56:28 Set A/D channel type result=40 03:56:28 Set A/D encoding result=40 03:56:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:28 Set channel filter=0.000000e+000 result=40 03:56:28 Config A/D Result=40 03:56:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:28 Get A/D filter: -9.255963e+061 result=40 03:56:28 Get A/D value=-858993460 result=40 03:56:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:28 Parameters OK 03:56:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:28 Set A/D data flow result=40 03:56:28 Set A/D channel type result=40 03:56:28 Set A/D encoding result=40 03:56:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:28 Set channel filter=0.000000e+000 result=40 03:56:28 Config A/D Result=40 03:56:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:28 Get A/D filter: -9.255963e+061 result=40 03:56:28 Get A/D value=-858993460 result=40 03:56:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:56:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:56:28 Aux= 03:56:28 Message to Camera, serial 52309 queued 03:57:05 Received message from Master: op=PointingHead serial=52322 03:57:05 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:57:05 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:57:05 Point started: ret=0 03:57:05 point_skyscan result=0 03:57:06 Check angles 03:57:06 SkyScan query 03:57:06 SkyScan query done: ret=0 az=64.065<-4271 ze=-68.37<-16558 Statuses=0009 0009 03:57:06 Msec=0 True Az=64.065 Ze=-68.37 Az status=0009 Ze status=0009 03:57:07 Check angles 03:57:07 SkyScan query 03:57:07 SkyScan query done: ret=0 az=81.855<-5457 ze=-89.82<-17988 Statuses=0009 0009 03:57:07 Msec=750 True Az=81.855 Ze=-89.82 Az status=0009 Ze status=0009 03:57:07 Check angles 03:57:07 SkyScan query 03:57:08 SkyScan query done: ret=0 az=99.45<-6630 ze=-110.76<-19384 Statuses=0009 0009 03:57:08 Msec=1500 True Az=99.45 Ze=-110.76 Az status=0009 Ze status=0009 03:57:08 Check angles 03:57:08 SkyScan query 03:57:09 SkyScan query done: ret=0 az=116.985<-7799 ze=-131.715<-20781 Statuses=0009 0009 03:57:09 Msec=2250 True Az=116.985 Ze=-131.715 Az status=0009 Ze status=0009 03:57:09 Check angles 03:57:09 SkyScan query 03:57:09 SkyScan query done: ret=0 az=131.16<-8744 ze=-141.555<-21437 Statuses=0009 0008 03:57:09 Msec=3000 True Az=131.16 Ze=-141.555 Az status=0009 Ze status=0008 03:57:10 Check angles 03:57:10 SkyScan query 03:57:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 03:57:10 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 03:57:10 Message to Master queued w/err=0: serial=52322 error=0 03:57:15 Received message from Master: op=Filter serial=52323 03:57:15 Color wheel filter change from 0 to 0 03:57:15 FLIGetFilterPos err=0 currentPosition=0 03:57:15 FLIGetStepsRemaining err=0 RemainingSteps=0 03:57:15 Filter is already there-color wheel unchanged 03:57:15 Received message from Master: op=Shutter serial=52324 03:57:15 Shutter LASER close 03:57:15 Received message from Camera: op=State serial=52326 03:57:15 GetSingleValue result=40 Value=cccccccc 03:57:15 SkyScan query 03:57:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:57:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:16 Parameters OK 03:57:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:16 Set A/D data flow result=40 03:57:16 Set A/D channel type result=40 03:57:16 Set A/D encoding result=40 03:57:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:16 Set channel filter=0.000000e+000 result=40 03:57:16 Config A/D Result=40 03:57:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:16 Get A/D filter: -9.255963e+061 result=40 03:57:16 Get A/D value=-858993460 result=40 03:57:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:16 Parameters OK 03:57:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:16 Set A/D data flow result=40 03:57:16 Set A/D channel type result=40 03:57:16 Set A/D encoding result=40 03:57:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:16 Set channel filter=0.000000e+000 result=40 03:57:16 Config A/D Result=40 03:57:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:16 Get A/D filter: -9.255963e+061 result=40 03:57:16 Get A/D value=-858993460 result=40 03:57:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:57:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:57:16 Aux= 03:57:16 Message to Camera, serial 52326 queued 03:57:53 Received message from Master: op=PointingHead serial=52339 03:57:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:57:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:57:53 Point started: ret=0 03:57:53 point_skyscan result=0 03:57:54 Check angles 03:57:54 SkyScan query 03:57:55 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.15<-23410 Statuses=0009 0009 03:57:55 Msec=0 True Az=113.01 Ze=-171.15 Az status=0009 Ze status=0009 03:57:55 Check angles 03:57:55 SkyScan query 03:57:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:57:55 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:57:55 Message to Master queued w/err=0: serial=52339 error=0 03:58:00 Received message from Master: op=Filter serial=52340 03:58:00 Color wheel filter change from 0 to 0 03:58:00 FLIGetFilterPos err=0 currentPosition=0 03:58:00 FLIGetStepsRemaining err=0 RemainingSteps=0 03:58:00 Filter is already there-color wheel unchanged 03:58:00 Received message from Master: op=Shutter serial=52341 03:58:00 Shutter LASER open 03:58:01 Received message from Camera: op=State serial=52343 03:58:01 GetSingleValue result=40 Value=cccccccc 03:58:01 SkyScan query 03:58:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:58:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:01 Parameters OK 03:58:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:01 Set A/D data flow result=40 03:58:01 Set A/D channel type result=40 03:58:01 Set A/D encoding result=40 03:58:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:01 Set channel filter=0.000000e+000 result=40 03:58:01 Config A/D Result=40 03:58:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:01 Get A/D filter: -9.255963e+061 result=40 03:58:01 Get A/D value=-858993460 result=40 03:58:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:01 Parameters OK 03:58:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:01 Set A/D data flow result=40 03:58:01 Set A/D channel type result=40 03:58:01 Set A/D encoding result=40 03:58:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:01 Set channel filter=0.000000e+000 result=40 03:58:01 Config A/D Result=40 03:58:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:01 Get A/D filter: -9.255963e+061 result=40 03:58:01 Get A/D value=-858993460 result=40 03:58:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:58:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:58:01 Aux= 03:58:01 Message to Camera, serial 52343 queued 03:58:09 Received message from Master: op=Shutter serial=52352 03:58:09 Shutter LASER close 03:58:09 Received message from Master: op=PointingHead serial=52356 03:58:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:58:09 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:58:10 Point started: ret=0 03:58:10 point_skyscan result=0 03:58:10 Check angles 03:58:10 SkyScan query 03:58:11 SkyScan query done: ret=0 az=136.2<-9080 ze=-142.905<-21527 Statuses=0009 0009 03:58:11 Msec=0 True Az=136.2 Ze=-142.905 Az status=0009 Ze status=0009 03:58:11 Check angles 03:58:11 SkyScan query 03:58:12 SkyScan query done: ret=0 az=154.065<-10271 ze=-121.5<-20100 Statuses=0009 0009 03:58:12 Msec=750 True Az=154.065 Ze=-121.5 Az status=0009 Ze status=0009 03:58:12 Check angles 03:58:12 SkyScan query 03:58:13 SkyScan query done: ret=0 az=171.525<-11435 ze=-100.515<-18701 Statuses=0009 0009 03:58:13 Msec=1500 True Az=171.525 Ze=-100.515 Az status=0009 Ze status=0009 03:58:13 Check angles 03:58:13 SkyScan query 03:58:13 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.62<-17308 Statuses=0008 0009 03:58:13 Msec=2250 True Az=176.025 Ze=-79.62 Az status=0008 Ze status=0009 03:58:13 Check angles 03:58:13 SkyScan query 03:58:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.62<-15908 Statuses=0008 0009 03:58:14 Msec=3000 True Az=176.01 Ze=-58.62 Az status=0008 Ze status=0009 03:58:14 Check angles 03:58:14 SkyScan query 03:58:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 03:58:15 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 03:58:15 Message to Master queued w/err=0: serial=52356 error=0 03:58:20 Received message from Master: op=Filter serial=52357 03:58:20 Color wheel filter change from 0 to 0 03:58:20 FLIGetFilterPos err=0 currentPosition=0 03:58:20 FLIGetStepsRemaining err=0 RemainingSteps=0 03:58:20 Filter is already there-color wheel unchanged 03:58:20 Received message from Master: op=Shutter serial=52358 03:58:20 Shutter LASER close 03:58:20 Received message from Camera: op=State serial=52360 03:58:20 GetSingleValue result=40 Value=cccccccc 03:58:20 SkyScan query 03:58:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:58:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:21 Parameters OK 03:58:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:21 Set A/D data flow result=40 03:58:21 Set A/D channel type result=40 03:58:21 Set A/D encoding result=40 03:58:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:21 Set channel filter=0.000000e+000 result=40 03:58:21 Config A/D Result=40 03:58:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:21 Get A/D filter: -9.255963e+061 result=40 03:58:21 Get A/D value=-858993460 result=40 03:58:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:21 Parameters OK 03:58:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:21 Set A/D data flow result=40 03:58:21 Set A/D channel type result=40 03:58:21 Set A/D encoding result=40 03:58:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:21 Set channel filter=0.000000e+000 result=40 03:58:21 Config A/D Result=40 03:58:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:21 Get A/D filter: -9.255963e+061 result=40 03:58:21 Get A/D value=-858993460 result=40 03:58:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:58:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:58:21 Aux= 03:58:21 Message to Camera, serial 52360 queued 03:58:57 Received message from Master: op=PointingHead serial=52373 03:58:57 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:58:57 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:58:58 Point started: ret=0 03:58:58 point_skyscan result=0 03:58:59 Check angles 03:58:59 SkyScan query 03:58:59 SkyScan query done: ret=0 az=153<-10200 ze=-21.78<-13452 Statuses=0009 0009 03:58:59 Msec=0 True Az=153 Ze=-21.78 Az status=0009 Ze status=0009 03:58:59 Check angles 03:58:59 SkyScan query 03:59:00 SkyScan query done: ret=0 az=135.525<-9035 ze=-0.795<-12053 Statuses=0009 0009 03:59:00 Msec=750 True Az=135.525 Ze=-0.795 Az status=0009 Ze status=0009 03:59:00 Check angles 03:59:00 SkyScan query 03:59:01 SkyScan query done: ret=0 az=117.975<-7865 ze=20.145<-10657 Statuses=0009 0009 03:59:01 Msec=1500 True Az=117.975 Ze=20.145 Az status=0009 Ze status=0009 03:59:01 Check angles 03:59:01 SkyScan query 03:59:01 SkyScan query done: ret=0 az=100.5<-6700 ze=41.115<-9259 Statuses=0009 0009 03:59:01 Msec=2250 True Az=100.5 Ze=41.115 Az status=0009 Ze status=0009 03:59:02 Check angles 03:59:02 SkyScan query 03:59:02 SkyScan query done: ret=0 az=86.025<-5735 ze=51.57<-8562 Statuses=0009 0008 03:59:02 Msec=3000 True Az=86.025 Ze=51.57 Az status=0009 Ze status=0008 03:59:02 Check angles 03:59:02 SkyScan query 03:59:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:59:03 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:59:03 Message to Master queued w/err=0: serial=52373 error=0 03:59:08 Received message from Master: op=Filter serial=52374 03:59:08 Color wheel filter change from 0 to 0 03:59:08 FLIGetFilterPos err=0 currentPosition=0 03:59:08 FLIGetStepsRemaining err=0 RemainingSteps=0 03:59:08 Filter is already there-color wheel unchanged 03:59:08 Received message from Master: op=Shutter serial=52375 03:59:08 Shutter LASER close 03:59:08 Received message from Camera: op=State serial=52377 03:59:08 GetSingleValue result=40 Value=cccccccc 03:59:08 SkyScan query 03:59:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:59:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:09 Parameters OK 03:59:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:09 Set A/D data flow result=40 03:59:09 Set A/D channel type result=40 03:59:09 Set A/D encoding result=40 03:59:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:09 Set channel filter=0.000000e+000 result=40 03:59:09 Config A/D Result=40 03:59:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:09 Get A/D filter: -9.255963e+061 result=40 03:59:09 Get A/D value=-858993460 result=40 03:59:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:09 Parameters OK 03:59:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:09 Set A/D data flow result=40 03:59:09 Set A/D channel type result=40 03:59:09 Set A/D encoding result=40 03:59:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:09 Set channel filter=0.000000e+000 result=40 03:59:09 Config A/D Result=40 03:59:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:09 Get A/D filter: -9.255963e+061 result=40 03:59:09 Get A/D value=-858993460 result=40 03:59:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:59:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:59:09 Aux= 03:59:09 Message to Camera, serial 52377 queued 03:59:46 Received message from Master: op=PointingHead serial=52390 03:59:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:59:46 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:59:46 Point started: ret=0 03:59:46 point_skyscan result=0 03:59:47 Check angles 03:59:47 SkyScan query 03:59:47 SkyScan query done: ret=0 az=109.23<-7282 ze=38.49<-9434 Statuses=0009 0008 03:59:47 Msec=0 True Az=109.23 Ze=38.49 Az status=0009 Ze status=0008 03:59:47 Check angles 03:59:47 SkyScan query 03:59:48 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 03:59:48 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 03:59:48 Check angles 03:59:48 SkyScan query 03:59:49 SkyScan query done: ret=0 az=144.165<-9611 ze=38.505<-9433 Statuses=0009 0008 03:59:49 Msec=1500 True Az=144.165 Ze=38.505 Az status=0009 Ze status=0008 03:59:49 Check angles 03:59:49 SkyScan query 03:59:49 SkyScan query done: ret=0 az=161.58<-10772 ze=38.505<-9433 Statuses=0009 0008 03:59:49 Msec=2250 True Az=161.58 Ze=38.505 Az status=0009 Ze status=0008 03:59:50 Check angles 03:59:50 SkyScan query 03:59:50 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 03:59:50 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 03:59:50 Check angles 03:59:50 SkyScan query 03:59:51 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:59:51 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:59:51 Message to Master queued w/err=0: serial=52390 error=0 03:59:56 Received message from Master: op=Filter serial=52391 03:59:56 Color wheel filter change from 0 to 0 03:59:56 FLIGetFilterPos err=0 currentPosition=0 03:59:56 FLIGetStepsRemaining err=0 RemainingSteps=0 03:59:56 Filter is already there-color wheel unchanged 03:59:56 Received message from Master: op=Shutter serial=52392 03:59:56 Shutter LASER close 03:59:56 Received message from Camera: op=State serial=52394 03:59:56 GetSingleValue result=40 Value=cccccccc 03:59:56 SkyScan query 03:59:57 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:59:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:57 Parameters OK 03:59:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:57 Set A/D data flow result=40 03:59:57 Set A/D channel type result=40 03:59:57 Set A/D encoding result=40 03:59:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:57 Set channel filter=0.000000e+000 result=40 03:59:57 Config A/D Result=40 03:59:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:57 Get A/D filter: -9.255963e+061 result=40 03:59:57 Get A/D value=-858993460 result=40 03:59:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:57 Parameters OK 03:59:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:57 Set A/D data flow result=40 03:59:57 Set A/D channel type result=40 03:59:57 Set A/D encoding result=40 03:59:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:57 Set channel filter=0.000000e+000 result=40 03:59:57 Config A/D Result=40 03:59:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:57 Get A/D filter: -9.255963e+061 result=40 03:59:57 Get A/D value=-858993460 result=40 03:59:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:59:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:59:57 Aux= 03:59:57 Message to Camera, serial 52394 queued 04:00:34 Received message from Master: op=PointingHead serial=52407 04:00:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:00:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:00:34 Point started: ret=0 04:00:34 point_skyscan result=0 04:00:35 Check angles 04:00:35 SkyScan query 04:00:35 SkyScan query done: ret=0 az=152.925<-10195 ze=8.565<-11429 Statuses=0009 0009 04:00:35 Msec=0 True Az=152.925 Ze=8.565 Az status=0009 Ze status=0009 04:00:35 Check angles 04:00:35 SkyScan query 04:00:36 SkyScan query done: ret=0 az=135.495<-9033 ze=-12.39<-12826 Statuses=0009 0009 04:00:36 Msec=750 True Az=135.495 Ze=-12.39 Az status=0009 Ze status=0009 04:00:36 Check angles 04:00:36 SkyScan query 04:00:37 SkyScan query done: ret=0 az=117.42<-7828 ze=-33.735<-14249 Statuses=0009 0009 04:00:37 Msec=1500 True Az=117.42 Ze=-33.735 Az status=0009 Ze status=0009 04:00:37 Check angles 04:00:37 SkyScan query 04:00:38 SkyScan query done: ret=0 az=100.095<-6673 ze=-51.57<-15438 Statuses=0009 0009 04:00:38 Msec=2250 True Az=100.095 Ze=-51.57 Az status=0009 Ze status=0009 04:00:38 Check angles 04:00:38 SkyScan query 04:00:38 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.525<-15435 Statuses=0009 0008 04:00:38 Msec=3000 True Az=86.04 Ze=-51.525 Az status=0009 Ze status=0008 04:00:38 Check angles 04:00:38 SkyScan query 04:00:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:00:39 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:00:39 Message to Master queued w/err=0: serial=52407 error=0 04:00:44 Received message from Master: op=Filter serial=52408 04:00:44 Color wheel filter change from 0 to 0 04:00:44 FLIGetFilterPos err=0 currentPosition=0 04:00:44 FLIGetStepsRemaining err=0 RemainingSteps=0 04:00:44 Filter is already there-color wheel unchanged 04:00:44 Received message from Master: op=Shutter serial=52409 04:00:44 Shutter LASER close 04:00:44 Received message from Camera: op=State serial=52411 04:00:44 GetSingleValue result=40 Value=cccccccc 04:00:44 SkyScan query 04:00:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:00:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:45 Parameters OK 04:00:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:45 Set A/D data flow result=40 04:00:45 Set A/D channel type result=40 04:00:45 Set A/D encoding result=40 04:00:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:45 Set channel filter=0.000000e+000 result=40 04:00:45 Config A/D Result=40 04:00:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:45 Get A/D filter: -9.255963e+061 result=40 04:00:45 Get A/D value=-858993460 result=40 04:00:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:45 Parameters OK 04:00:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:45 Set A/D data flow result=40 04:00:45 Set A/D channel type result=40 04:00:45 Set A/D encoding result=40 04:00:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:45 Set channel filter=0.000000e+000 result=40 04:00:45 Config A/D Result=40 04:00:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:45 Get A/D filter: -9.255963e+061 result=40 04:00:45 Get A/D value=-858993460 result=40 04:00:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:00:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:00:45 Aux= 04:00:45 Message to Camera, serial 52411 queued 04:01:22 Received message from Master: op=PointingHead serial=52424 04:01:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:01:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:01:22 Point started: ret=0 04:01:22 point_skyscan result=0 04:01:23 Check angles 04:01:23 SkyScan query 04:01:23 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.45<-17430 Statuses=0009 0009 04:01:23 Msec=0 True Az=109.185 Ze=-81.45 Az status=0009 Ze status=0009 04:01:24 Check angles 04:01:24 SkyScan query 04:01:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.855<-18857 Statuses=0008 0009 04:01:24 Msec=750 True Az=112.995 Ze=-102.855 Az status=0008 Ze status=0009 04:01:24 Check angles 04:01:24 SkyScan query 04:01:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.795<-20253 Statuses=0008 0009 04:01:25 Msec=1500 True Az=112.995 Ze=-123.795 Az status=0008 Ze status=0009 04:01:25 Check angles 04:01:25 SkyScan query 04:01:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.75<-21650 Statuses=0008 0009 04:01:26 Msec=2250 True Az=112.995 Ze=-144.75 Az status=0008 Ze status=0009 04:01:26 Check angles 04:01:26 SkyScan query 04:01:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.69<-23046 Statuses=0008 0009 04:01:26 Msec=3000 True Az=112.995 Ze=-165.69 Az status=0008 Ze status=0009 04:01:27 Check angles 04:01:27 SkyScan query 04:01:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:01:27 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:01:27 Message to Master queued w/err=0: serial=52424 error=0 04:01:32 Received message from Master: op=Filter serial=52425 04:01:32 Color wheel filter change from 0 to 0 04:01:32 FLIGetFilterPos err=0 currentPosition=0 04:01:32 FLIGetStepsRemaining err=0 RemainingSteps=0 04:01:32 Filter is already there-color wheel unchanged 04:01:32 Received message from Master: op=Shutter serial=52426 04:01:32 Shutter LASER open 04:01:32 Received message from Camera: op=State serial=52428 04:01:32 GetSingleValue result=40 Value=cccccccc 04:01:32 SkyScan query 04:01:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:01:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:33 Parameters OK 04:01:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:33 Set A/D data flow result=40 04:01:33 Set A/D channel type result=40 04:01:33 Set A/D encoding result=40 04:01:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:33 Set channel filter=0.000000e+000 result=40 04:01:33 Config A/D Result=40 04:01:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:33 Get A/D filter: -9.255963e+061 result=40 04:01:33 Get A/D value=-858993460 result=40 04:01:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:33 Parameters OK 04:01:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:33 Set A/D data flow result=40 04:01:33 Set A/D channel type result=40 04:01:33 Set A/D encoding result=40 04:01:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:33 Set channel filter=0.000000e+000 result=40 04:01:33 Config A/D Result=40 04:01:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:33 Get A/D filter: -9.255963e+061 result=40 04:01:33 Get A/D value=-858993460 result=40 04:01:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:01:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:01:33 Aux= 04:01:33 Message to Camera, serial 52428 queued 04:01:41 Received message from Master: op=Shutter serial=52438 04:01:41 Shutter LASER close 04:01:42 Received message from Master: op=PointingHead serial=52442 04:01:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:01:42 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:01:42 Point started: ret=0 04:01:42 point_skyscan result=0 04:01:43 Check angles 04:01:43 SkyScan query 04:01:44 SkyScan query done: ret=0 az=90.045<-6003 ze=157.44<-1504 Statuses=0009 0009 04:01:44 Msec=0 True Az=90.045 Ze=157.44 Az status=0009 Ze status=0009 04:01:44 Check angles 04:01:44 SkyScan query 04:01:44 SkyScan query done: ret=0 az=72.06<-4804 ze=136.05<-2930 Statuses=0009 0009 04:01:44 Msec=750 True Az=72.06 Ze=136.05 Az status=0009 Ze status=0009 04:01:44 Check angles 04:01:44 SkyScan query 04:01:45 SkyScan query done: ret=0 az=54.855<-3657 ze=115.08<-4328 Statuses=0009 0009 04:01:45 Msec=1500 True Az=54.855 Ze=115.08 Az status=0009 Ze status=0009 04:01:45 Check angles 04:01:45 SkyScan query 04:01:46 SkyScan query done: ret=0 az=40.875<-2725 ze=94.14<-5724 Statuses=0009 0009 04:01:46 Msec=2250 True Az=40.875 Ze=94.14 Az status=0009 Ze status=0009 04:01:46 Check angles 04:01:46 SkyScan query 04:01:47 SkyScan query done: ret=0 az=40.995<-2733 ze=72.72<-7152 Statuses=0008 0009 04:01:47 Msec=3000 True Az=40.995 Ze=72.72 Az status=0008 Ze status=0009 04:01:47 Check angles 04:01:47 SkyScan query 04:01:47 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 04:01:47 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 04:01:48 Check angles 04:01:48 SkyScan query 04:01:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:01:48 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:01:48 Message to Master queued w/err=0: serial=52442 error=0 04:01:53 Received message from Master: op=Filter serial=52443 04:01:53 Color wheel filter change from 0 to 0 04:01:53 FLIGetFilterPos err=0 currentPosition=0 04:01:53 FLIGetStepsRemaining err=0 RemainingSteps=0 04:01:53 Filter is already there-color wheel unchanged 04:01:53 Received message from Master: op=Shutter serial=52444 04:01:53 Shutter LASER close 04:01:53 Received message from Camera: op=State serial=52446 04:01:53 GetSingleValue result=40 Value=cccccccc 04:01:53 SkyScan query 04:01:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:01:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:54 Parameters OK 04:01:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:54 Set A/D data flow result=40 04:01:54 Set A/D channel type result=40 04:01:54 Set A/D encoding result=40 04:01:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:54 Set channel filter=0.000000e+000 result=40 04:01:54 Config A/D Result=40 04:01:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:54 Get A/D filter: -9.255963e+061 result=40 04:01:54 Get A/D value=-858993460 result=40 04:01:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:54 Parameters OK 04:01:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:54 Set A/D data flow result=40 04:01:54 Set A/D channel type result=40 04:01:54 Set A/D encoding result=40 04:01:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:54 Set channel filter=0.000000e+000 result=40 04:01:54 Config A/D Result=40 04:01:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:54 Get A/D filter: -9.255963e+061 result=40 04:01:54 Get A/D value=-858993460 result=40 04:01:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:01:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:01:54 Aux= 04:01:54 Message to Camera, serial 52446 queued 04:02:30 Received message from Master: op=PointingHead serial=52458 04:02:30 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:02:30 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:02:30 Point started: ret=0 04:02:30 point_skyscan result=0 04:02:31 Check angles 04:02:31 SkyScan query 04:02:32 SkyScan query done: ret=0 az=64.545<-4303 ze=66.555<-7563 Statuses=0009 0008 04:02:32 Msec=0 True Az=64.545 Ze=66.555 Az status=0009 Ze status=0008 04:02:32 Check angles 04:02:32 SkyScan query 04:02:32 SkyScan query done: ret=0 az=82.14<-5476 ze=66.495<-7567 Statuses=0009 0008 04:02:32 Msec=750 True Az=82.14 Ze=66.495 Az status=0009 Ze status=0008 04:02:33 Check angles 04:02:33 SkyScan query 04:02:33 SkyScan query done: ret=0 az=99.78<-6652 ze=66.495<-7567 Statuses=0009 0008 04:02:33 Msec=1500 True Az=99.78 Ze=66.495 Az status=0009 Ze status=0008 04:02:33 Check angles 04:02:33 SkyScan query 04:02:34 SkyScan query done: ret=0 az=117.195<-7813 ze=66.495<-7567 Statuses=0009 0008 04:02:34 Msec=2250 True Az=117.195 Ze=66.495 Az status=0009 Ze status=0008 04:02:34 Check angles 04:02:34 SkyScan query 04:02:35 SkyScan query done: ret=0 az=134.895<-8993 ze=66.495<-7567 Statuses=0009 0008 04:02:35 Msec=3000 True Az=134.895 Ze=66.495 Az status=0009 Ze status=0008 04:02:35 Check angles 04:02:35 SkyScan query 04:02:35 SkyScan query done: ret=0 az=152.46<-10164 ze=66.495<-7567 Statuses=0009 0008 04:02:35 Msec=3750 True Az=152.46 Ze=66.495 Az status=0009 Ze status=0008 04:02:36 Check angles 04:02:36 SkyScan query 04:02:36 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:02:36 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 04:02:36 Message to Master queued w/err=0: serial=52458 error=0 04:02:41 Received message from Master: op=Filter serial=52459 04:02:41 Color wheel filter change from 0 to 0 04:02:41 FLIGetFilterPos err=0 currentPosition=0 04:02:41 FLIGetStepsRemaining err=0 RemainingSteps=0 04:02:41 Filter is already there-color wheel unchanged 04:02:41 Received message from Master: op=Shutter serial=52460 04:02:41 Shutter LASER close 04:02:41 Received message from Camera: op=State serial=52462 04:02:41 GetSingleValue result=40 Value=cccccccc 04:02:41 SkyScan query 04:02:42 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:02:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:42 Parameters OK 04:02:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:42 Set A/D data flow result=40 04:02:42 Set A/D channel type result=40 04:02:42 Set A/D encoding result=40 04:02:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:42 Set channel filter=0.000000e+000 result=40 04:02:42 Config A/D Result=40 04:02:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:42 Get A/D filter: -9.255963e+061 result=40 04:02:42 Get A/D value=-858993460 result=40 04:02:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:42 Parameters OK 04:02:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:42 Set A/D data flow result=40 04:02:42 Set A/D channel type result=40 04:02:42 Set A/D encoding result=40 04:02:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:42 Set channel filter=0.000000e+000 result=40 04:02:42 Config A/D Result=40 04:02:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:42 Get A/D filter: -9.255963e+061 result=40 04:02:42 Get A/D value=-858993460 result=40 04:02:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:42 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:02:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:02:42 Aux= 04:02:42 Message to Camera, serial 52462 queued 04:03:19 Received message from Master: op=PointingHead serial=52475 04:03:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:03:19 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:03:19 Point started: ret=0 04:03:19 point_skyscan result=0 04:03:20 Check angles 04:03:20 SkyScan query 04:03:20 SkyScan query done: ret=0 az=134.61<-8974 ze=36.255<-9583 Statuses=0009 0009 04:03:20 Msec=0 True Az=134.61 Ze=36.255 Az status=0009 Ze status=0009 04:03:21 Check angles 04:03:21 SkyScan query 04:03:21 SkyScan query done: ret=0 az=117.09<-7806 ze=15.36<-10976 Statuses=0009 0009 04:03:21 Msec=750 True Az=117.09 Ze=15.36 Az status=0009 Ze status=0009 04:03:21 Check angles 04:03:21 SkyScan query 04:03:22 SkyScan query done: ret=0 az=99.36<-6624 ze=-6.075<-12405 Statuses=0009 0009 04:03:22 Msec=1500 True Az=99.36 Ze=-6.075 Az status=0009 Ze status=0009 04:03:22 Check angles 04:03:22 SkyScan query 04:03:23 SkyScan query done: ret=0 az=81.81<-5454 ze=-27.015<-13801 Statuses=0009 0009 04:03:23 Msec=2250 True Az=81.81 Ze=-27.015 Az status=0009 Ze status=0009 04:03:23 Check angles 04:03:23 SkyScan query 04:03:24 SkyScan query done: ret=0 az=64.41<-4294 ze=-38.565<-14571 Statuses=0009 0008 04:03:24 Msec=3000 True Az=64.41 Ze=-38.565 Az status=0009 Ze status=0008 04:03:24 Check angles 04:03:24 SkyScan query 04:03:24 SkyScan query done: ret=0 az=46.98<-3132 ze=-38.535<-14569 Statuses=0009 0008 04:03:24 Msec=3750 True Az=46.98 Ze=-38.535 Az status=0009 Ze status=0008 04:03:24 Check angles 04:03:24 SkyScan query 04:03:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:03:25 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:03:25 Message to Master queued w/err=0: serial=52475 error=0 04:03:30 Received message from Master: op=Filter serial=52476 04:03:30 Color wheel filter change from 0 to 0 04:03:30 FLIGetFilterPos err=0 currentPosition=0 04:03:30 FLIGetStepsRemaining err=0 RemainingSteps=0 04:03:30 Filter is already there-color wheel unchanged 04:03:30 Received message from Master: op=Shutter serial=52477 04:03:30 Shutter LASER close 04:03:30 Received message from Camera: op=State serial=52479 04:03:30 GetSingleValue result=40 Value=cccccccc 04:03:30 SkyScan query 04:03:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:03:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:31 Parameters OK 04:03:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:31 Set A/D data flow result=40 04:03:31 Set A/D channel type result=40 04:03:31 Set A/D encoding result=40 04:03:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:31 Set channel filter=0.000000e+000 result=40 04:03:31 Config A/D Result=40 04:03:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:31 Get A/D filter: -9.255963e+061 result=40 04:03:31 Get A/D value=-858993460 result=40 04:03:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:31 Parameters OK 04:03:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:31 Set A/D data flow result=40 04:03:31 Set A/D channel type result=40 04:03:31 Set A/D encoding result=40 04:03:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:31 Set channel filter=0.000000e+000 result=40 04:03:31 Config A/D Result=40 04:03:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:31 Get A/D filter: -9.255963e+061 result=40 04:03:31 Get A/D value=-858993460 result=40 04:03:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:03:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:03:31 Aux= 04:03:31 Message to Camera, serial 52479 queued 04:04:08 Received message from Master: op=PointingHead serial=52492 04:04:08 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:04:08 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:04:08 Point started: ret=0 04:04:08 point_skyscan result=0 04:04:09 Check angles 04:04:09 SkyScan query 04:04:09 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.07<-16538 Statuses=0009 0009 04:04:09 Msec=0 True Az=63.795 Ze=-68.07 Az status=0009 Ze status=0009 04:04:09 Check angles 04:04:09 SkyScan query 04:04:10 SkyScan query done: ret=0 az=81.18<-5412 ze=-89.07<-17938 Statuses=0009 0009 04:04:10 Msec=750 True Az=81.18 Ze=-89.07 Az status=0009 Ze status=0009 04:04:10 Check angles 04:04:10 SkyScan query 04:04:11 SkyScan query done: ret=0 az=98.745<-6583 ze=-109.995<-19333 Statuses=0009 0009 04:04:11 Msec=1500 True Az=98.745 Ze=-109.995 Az status=0009 Ze status=0009 04:04:11 Check angles 04:04:11 SkyScan query 04:04:12 SkyScan query done: ret=0 az=116.325<-7755 ze=-130.95<-20730 Statuses=0009 0009 04:04:12 Msec=2250 True Az=116.325 Ze=-130.95 Az status=0009 Ze status=0009 04:04:12 Check angles 04:04:12 SkyScan query 04:04:12 SkyScan query done: ret=0 az=131.16<-8744 ze=-141.54<-21436 Statuses=0009 0008 04:04:12 Msec=3000 True Az=131.16 Ze=-141.54 Az status=0009 Ze status=0008 04:04:12 Check angles 04:04:12 SkyScan query 04:04:13 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:04:13 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:04:13 Message to Master queued w/err=0: serial=52492 error=0 04:04:18 Received message from Master: op=Filter serial=52493 04:04:18 Color wheel filter change from 0 to 0 04:04:18 FLIGetFilterPos err=0 currentPosition=0 04:04:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:04:18 Filter is already there-color wheel unchanged 04:04:18 Received message from Master: op=Shutter serial=52494 04:04:18 Shutter LASER close 04:04:18 Received message from Camera: op=State serial=52496 04:04:18 GetSingleValue result=40 Value=cccccccc 04:04:18 SkyScan query 04:04:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:04:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:19 Parameters OK 04:04:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:19 Set A/D data flow result=40 04:04:19 Set A/D channel type result=40 04:04:19 Set A/D encoding result=40 04:04:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:19 Set channel filter=0.000000e+000 result=40 04:04:19 Config A/D Result=40 04:04:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:19 Get A/D filter: -9.255963e+061 result=40 04:04:19 Get A/D value=-858993460 result=40 04:04:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:19 Parameters OK 04:04:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:19 Set A/D data flow result=40 04:04:19 Set A/D channel type result=40 04:04:19 Set A/D encoding result=40 04:04:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:19 Set channel filter=0.000000e+000 result=40 04:04:19 Config A/D Result=40 04:04:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:19 Get A/D filter: -9.255963e+061 result=40 04:04:19 Get A/D value=-858993460 result=40 04:04:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:19 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:04:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:04:19 Aux= 04:04:19 Message to Camera, serial 52496 queued 04:04:56 Received message from Master: op=PointingHead serial=52509 04:04:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:04:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:04:56 Point started: ret=0 04:04:56 point_skyscan result=0 04:04:57 Check angles 04:04:57 SkyScan query 04:04:57 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 04:04:57 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 04:04:58 Check angles 04:04:58 SkyScan query 04:04:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:04:58 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:04:58 Message to Master queued w/err=0: serial=52509 error=0 04:05:03 Received message from Master: op=Filter serial=52510 04:05:03 Color wheel filter change from 0 to 0 04:05:03 FLIGetFilterPos err=0 currentPosition=0 04:05:03 FLIGetStepsRemaining err=0 RemainingSteps=0 04:05:03 Filter is already there-color wheel unchanged 04:05:03 Received message from Master: op=Shutter serial=52511 04:05:03 Shutter LASER open 04:05:03 Received message from Camera: op=State serial=52513 04:05:03 GetSingleValue result=40 Value=cccccccc 04:05:03 SkyScan query 04:05:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:05:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:04 Parameters OK 04:05:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:04 Set A/D data flow result=40 04:05:04 Set A/D channel type result=40 04:05:04 Set A/D encoding result=40 04:05:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:04 Set channel filter=0.000000e+000 result=40 04:05:04 Config A/D Result=40 04:05:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:04 Get A/D filter: -9.255963e+061 result=40 04:05:04 Get A/D value=-858993460 result=40 04:05:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:04 Parameters OK 04:05:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:04 Set A/D data flow result=40 04:05:04 Set A/D channel type result=40 04:05:04 Set A/D encoding result=40 04:05:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:04 Set channel filter=0.000000e+000 result=40 04:05:04 Config A/D Result=40 04:05:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:04 Get A/D filter: -9.255963e+061 result=40 04:05:04 Get A/D value=-858993460 result=40 04:05:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:05:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:05:04 Aux= 04:05:04 Message to Camera, serial 52513 queued 04:05:12 Received message from Master: op=Shutter serial=52523 04:05:12 Shutter LASER close 04:05:13 Received message from Master: op=PointingHead serial=52527 04:05:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:05:13 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:05:13 Point started: ret=0 04:05:13 point_skyscan result=0 04:05:14 Check angles 04:05:14 SkyScan query 04:05:15 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.46<-21564 Statuses=0009 0009 04:05:15 Msec=0 True Az=135.765 Ze=-143.46 Az status=0009 Ze status=0009 04:05:15 Check angles 04:05:15 SkyScan query 04:05:15 SkyScan query done: ret=0 az=153.645<-10243 ze=-122.01<-20134 Statuses=0009 0009 04:05:15 Msec=750 True Az=153.645 Ze=-122.01 Az status=0009 Ze status=0009 04:05:16 Check angles 04:05:16 SkyScan query 04:05:16 SkyScan query done: ret=0 az=171.09<-11406 ze=-101.115<-18741 Statuses=0009 0009 04:05:16 Msec=1500 True Az=171.09 Ze=-101.115 Az status=0009 Ze status=0009 04:05:16 Check angles 04:05:16 SkyScan query 04:05:17 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.71<-17314 Statuses=0008 0009 04:05:17 Msec=2250 True Az=176.025 Ze=-79.71 Az status=0008 Ze status=0009 04:05:17 Check angles 04:05:17 SkyScan query 04:05:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.725<-15915 Statuses=0008 0009 04:05:18 Msec=3000 True Az=175.995 Ze=-58.725 Az status=0008 Ze status=0009 04:05:18 Check angles 04:05:18 SkyScan query 04:05:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:05:19 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:05:19 Message to Master queued w/err=0: serial=52527 error=0 04:05:24 Received message from Master: op=Filter serial=52528 04:05:24 Color wheel filter change from 0 to 0 04:05:24 FLIGetFilterPos err=0 currentPosition=0 04:05:24 FLIGetStepsRemaining err=0 RemainingSteps=0 04:05:24 Filter is already there-color wheel unchanged 04:05:24 Received message from Master: op=Shutter serial=52529 04:05:24 Shutter LASER close 04:05:24 Received message from Camera: op=State serial=52531 04:05:24 GetSingleValue result=40 Value=cccccccc 04:05:24 SkyScan query 04:05:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:05:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:24 Parameters OK 04:05:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:24 Set A/D data flow result=40 04:05:24 Set A/D channel type result=40 04:05:24 Set A/D encoding result=40 04:05:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:24 Set channel filter=0.000000e+000 result=40 04:05:24 Config A/D Result=40 04:05:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:24 Get A/D filter: -9.255963e+061 result=40 04:05:24 Get A/D value=-858993460 result=40 04:05:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:24 Parameters OK 04:05:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:24 Set A/D data flow result=40 04:05:24 Set A/D channel type result=40 04:05:24 Set A/D encoding result=40 04:05:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:24 Set channel filter=0.000000e+000 result=40 04:05:24 Config A/D Result=40 04:05:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:24 Get A/D filter: -9.255963e+061 result=40 04:05:24 Get A/D value=-858993460 result=40 04:05:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:05:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:05:24 Aux= 04:05:24 Message to Camera, serial 52531 queued 04:06:01 Received message from Master: op=PointingHead serial=52544 04:06:01 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:06:01 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:06:02 Point started: ret=0 04:06:02 point_skyscan result=0 04:06:02 Check angles 04:06:02 SkyScan query 04:06:03 SkyScan query done: ret=0 az=153.195<-10213 ze=-21.96<-13464 Statuses=0009 0009 04:06:03 Msec=0 True Az=153.195 Ze=-21.96 Az status=0009 Ze status=0009 04:06:03 Check angles 04:06:03 SkyScan query 04:06:04 SkyScan query done: ret=0 az=135.75<-9050 ze=-0.99<-12066 Statuses=0009 0009 04:06:04 Msec=750 True Az=135.75 Ze=-0.99 Az status=0009 Ze status=0009 04:06:04 Check angles 04:06:04 SkyScan query [UTC 2018-12-11 04:06:04] 04:06:04 SkyScan query done: ret=0 az=118.23<-7882 ze=19.95<-10670 Statuses=0009 0009 04:06:04 Msec=1500 True Az=118.23 Ze=19.95 Az status=0009 Ze status=0009 04:06:05 Check angles 04:06:05 SkyScan query 04:06:05 SkyScan query done: ret=0 az=100.62<-6708 ze=40.92<-9272 Statuses=0009 0009 04:06:05 Msec=2250 True Az=100.62 Ze=40.92 Az status=0009 Ze status=0009 04:06:05 Check angles 04:06:05 SkyScan query 04:06:06 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 04:06:06 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 04:06:06 Check angles 04:06:06 SkyScan query 04:06:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:06:07 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:06:07 Message to Master queued w/err=0: serial=52544 error=0 04:06:12 Received message from Master: op=Filter serial=52545 04:06:12 Color wheel filter change from 0 to 0 04:06:12 FLIGetFilterPos err=0 currentPosition=0 04:06:12 FLIGetStepsRemaining err=0 RemainingSteps=0 04:06:12 Filter is already there-color wheel unchanged 04:06:12 Received message from Master: op=Shutter serial=52546 04:06:12 Shutter LASER close 04:06:12 Received message from Camera: op=State serial=52548 04:06:12 GetSingleValue result=40 Value=cccccccc 04:06:12 SkyScan query 04:06:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:06:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:12 Parameters OK 04:06:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:12 Set A/D data flow result=40 04:06:12 Set A/D channel type result=40 04:06:12 Set A/D encoding result=40 04:06:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:12 Set channel filter=0.000000e+000 result=40 04:06:12 Config A/D Result=40 04:06:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:12 Get A/D filter: -9.255963e+061 result=40 04:06:12 Get A/D value=-858993460 result=40 04:06:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:12 Parameters OK 04:06:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:12 Set A/D data flow result=40 04:06:12 Set A/D channel type result=40 04:06:12 Set A/D encoding result=40 04:06:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:12 Set channel filter=0.000000e+000 result=40 04:06:12 Config A/D Result=40 04:06:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:12 Get A/D filter: -9.255963e+061 result=40 04:06:12 Get A/D value=-858993460 result=40 04:06:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:06:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:06:12 Aux= 04:06:12 Message to Camera, serial 52548 queued 04:06:49 Received message from Master: op=PointingHead serial=52561 04:06:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:06:49 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:06:50 Point started: ret=0 04:06:50 point_skyscan result=0 04:06:51 Check angles 04:06:51 SkyScan query 04:06:51 SkyScan query done: ret=0 az=109.08<-7272 ze=38.49<-9434 Statuses=0009 0008 04:06:51 Msec=0 True Az=109.08 Ze=38.49 Az status=0009 Ze status=0008 04:06:51 Check angles 04:06:51 SkyScan query 04:06:52 SkyScan query done: ret=0 az=126.9<-8460 ze=38.505<-9433 Statuses=0009 0008 04:06:52 Msec=750 True Az=126.9 Ze=38.505 Az status=0009 Ze status=0008 04:06:52 Check angles 04:06:52 SkyScan query 04:06:53 SkyScan query done: ret=0 az=144.39<-9626 ze=38.505<-9433 Statuses=0009 0008 04:06:53 Msec=1500 True Az=144.39 Ze=38.505 Az status=0009 Ze status=0008 04:06:53 Check angles 04:06:53 SkyScan query 04:06:53 SkyScan query done: ret=0 az=161.805<-10787 ze=38.505<-9433 Statuses=0009 0008 04:06:53 Msec=2250 True Az=161.805 Ze=38.505 Az status=0009 Ze status=0008 04:06:54 Check angles 04:06:54 SkyScan query 04:06:54 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:06:54 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:06:54 Check angles 04:06:54 SkyScan query 04:06:55 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:06:55 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:06:55 Message to Master queued w/err=0: serial=52561 error=0 04:07:00 Received message from Master: op=Filter serial=52562 04:07:00 Color wheel filter change from 0 to 0 04:07:00 FLIGetFilterPos err=0 currentPosition=0 04:07:00 FLIGetStepsRemaining err=0 RemainingSteps=0 04:07:00 Filter is already there-color wheel unchanged 04:07:00 Received message from Master: op=Shutter serial=52563 04:07:00 Shutter LASER close 04:07:00 Received message from Camera: op=State serial=52565 04:07:00 GetSingleValue result=40 Value=cccccccc 04:07:00 SkyScan query 04:07:01 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:07:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:01 Parameters OK 04:07:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:01 Set A/D data flow result=40 04:07:01 Set A/D channel type result=40 04:07:01 Set A/D encoding result=40 04:07:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:01 Set channel filter=0.000000e+000 result=40 04:07:01 Config A/D Result=40 04:07:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:01 Get A/D filter: -9.255963e+061 result=40 04:07:01 Get A/D value=-858993460 result=40 04:07:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:01 Parameters OK 04:07:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:01 Set A/D data flow result=40 04:07:01 Set A/D channel type result=40 04:07:01 Set A/D encoding result=40 04:07:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:01 Set channel filter=0.000000e+000 result=40 04:07:01 Config A/D Result=40 04:07:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:01 Get A/D filter: -9.255963e+061 result=40 04:07:01 Get A/D value=-858993460 result=40 04:07:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:07:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:07:01 Aux= 04:07:01 Message to Camera, serial 52565 queued 04:07:37 Received message from Master: op=PointingHead serial=52578 04:07:37 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:07:38 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:07:38 Point started: ret=0 04:07:38 point_skyscan result=0 04:07:39 Check angles 04:07:39 SkyScan query 04:07:39 SkyScan query done: ret=0 az=152.625<-10175 ze=8.19<-11454 Statuses=0009 0009 04:07:39 Msec=0 True Az=152.625 Ze=8.19 Az status=0009 Ze status=0009 04:07:39 Check angles 04:07:39 SkyScan query 04:07:40 SkyScan query done: ret=0 az=134.655<-8977 ze=-13.17<-12878 Statuses=0009 0009 04:07:40 Msec=750 True Az=134.655 Ze=-13.17 Az status=0009 Ze status=0009 04:07:40 Check angles 04:07:40 SkyScan query 04:07:41 SkyScan query done: ret=0 az=117.045<-7803 ze=-34.155<-14277 Statuses=0009 0009 04:07:41 Msec=1500 True Az=117.045 Ze=-34.155 Az status=0009 Ze status=0009 04:07:41 Check angles 04:07:41 SkyScan query 04:07:41 SkyScan query done: ret=0 az=99.525<-6635 ze=-51.57<-15438 Statuses=0009 0009 04:07:41 Msec=2250 True Az=99.525 Ze=-51.57 Az status=0009 Ze status=0009 04:07:42 Check angles 04:07:42 SkyScan query 04:07:42 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 04:07:42 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 04:07:42 Check angles 04:07:42 SkyScan query 04:07:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:07:43 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:07:43 Message to Master queued w/err=0: serial=52578 error=0 04:07:48 Received message from Master: op=Filter serial=52579 04:07:48 Color wheel filter change from 0 to 0 04:07:48 FLIGetFilterPos err=0 currentPosition=0 04:07:48 FLIGetStepsRemaining err=0 RemainingSteps=0 04:07:48 Filter is already there-color wheel unchanged 04:07:48 Received message from Master: op=Shutter serial=52580 04:07:48 Shutter LASER close 04:07:48 Received message from Camera: op=State serial=52582 04:07:48 GetSingleValue result=40 Value=cccccccc 04:07:48 SkyScan query 04:07:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:07:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:49 Parameters OK 04:07:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:49 Set A/D data flow result=40 04:07:49 Set A/D channel type result=40 04:07:49 Set A/D encoding result=40 04:07:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:49 Set channel filter=0.000000e+000 result=40 04:07:49 Config A/D Result=40 04:07:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:49 Get A/D filter: -9.255963e+061 result=40 04:07:49 Get A/D value=-858993460 result=40 04:07:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:49 Parameters OK 04:07:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:49 Set A/D data flow result=40 04:07:49 Set A/D channel type result=40 04:07:49 Set A/D encoding result=40 04:07:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:49 Set channel filter=0.000000e+000 result=40 04:07:49 Config A/D Result=40 04:07:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:49 Get A/D filter: -9.255963e+061 result=40 04:07:49 Get A/D value=-858993460 result=40 04:07:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:07:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:07:49 Aux= 04:07:49 Message to Camera, serial 52582 queued 04:08:26 Received message from Master: op=PointingHead serial=52595 04:08:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:08:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:08:26 Point started: ret=0 04:08:26 point_skyscan result=0 04:08:27 Check angles 04:08:27 SkyScan query 04:08:27 SkyScan query done: ret=0 az=109.245<-7283 ze=-81.615<-17441 Statuses=0009 0009 04:08:27 Msec=0 True Az=109.245 Ze=-81.615 Az status=0009 Ze status=0009 04:08:28 Check angles 04:08:28 SkyScan query 04:08:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.02<-18868 Statuses=0008 0009 04:08:28 Msec=750 True Az=112.995 Ze=-103.02 Az status=0008 Ze status=0009 04:08:28 Check angles 04:08:28 SkyScan query 04:08:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.945<-20263 Statuses=0008 0009 04:08:29 Msec=1500 True Az=112.995 Ze=-123.945 Az status=0008 Ze status=0009 04:08:29 Check angles 04:08:29 SkyScan query 04:08:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.9<-21660 Statuses=0008 0009 04:08:30 Msec=2250 True Az=112.995 Ze=-144.9 Az status=0008 Ze status=0009 04:08:30 Check angles 04:08:30 SkyScan query 04:08:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.275<-23085 Statuses=0008 0009 04:08:30 Msec=3000 True Az=112.995 Ze=-166.275 Az status=0008 Ze status=0009 04:08:31 Check angles 04:08:31 SkyScan query 04:08:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:08:31 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:08:31 Message to Master queued w/err=0: serial=52595 error=0 04:08:36 Received message from Master: op=Filter serial=52596 04:08:36 Color wheel filter change from 0 to 0 04:08:36 FLIGetFilterPos err=0 currentPosition=0 04:08:36 FLIGetStepsRemaining err=0 RemainingSteps=0 04:08:36 Filter is already there-color wheel unchanged 04:08:36 Received message from Master: op=Shutter serial=52597 04:08:36 Shutter LASER open 04:08:36 Received message from Camera: op=State serial=52599 04:08:36 GetSingleValue result=40 Value=cccccccc 04:08:36 SkyScan query 04:08:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:08:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:37 Parameters OK 04:08:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:37 Set A/D data flow result=40 04:08:37 Set A/D channel type result=40 04:08:37 Set A/D encoding result=40 04:08:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:37 Set channel filter=0.000000e+000 result=40 04:08:37 Config A/D Result=40 04:08:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:37 Get A/D filter: -9.255963e+061 result=40 04:08:37 Get A/D value=-858993460 result=40 04:08:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:37 Parameters OK 04:08:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:37 Set A/D data flow result=40 04:08:37 Set A/D channel type result=40 04:08:37 Set A/D encoding result=40 04:08:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:37 Set channel filter=0.000000e+000 result=40 04:08:37 Config A/D Result=40 04:08:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:37 Get A/D filter: -9.255963e+061 result=40 04:08:37 Get A/D value=-858993460 result=40 04:08:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:08:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:08:37 Aux= 04:08:37 Message to Camera, serial 52599 queued 04:08:45 Received message from Master: op=Shutter serial=52609 04:08:45 Shutter LASER close 04:08:46 Received message from Master: op=PointingHead serial=52613 04:08:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:08:46 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:08:46 Point started: ret=0 04:08:46 point_skyscan result=0 04:08:47 Check angles 04:08:47 SkyScan query 04:08:48 SkyScan query done: ret=0 az=89.895<-5993 ze=157.38<-1508 Statuses=0009 0009 04:08:48 Msec=0 True Az=89.895 Ze=157.38 Az status=0009 Ze status=0009 04:08:48 Check angles 04:08:48 SkyScan query 04:08:48 SkyScan query done: ret=0 az=72.3<-4820 ze=136.395<-2907 Statuses=0009 0009 04:08:48 Msec=750 True Az=72.3 Ze=136.395 Az status=0009 Ze status=0009 04:08:49 Check angles 04:08:49 SkyScan query 04:08:49 SkyScan query done: ret=0 az=55.005<-3667 ze=115.47<-4302 Statuses=0009 0009 04:08:49 Msec=1500 True Az=55.005 Ze=115.47 Az status=0009 Ze status=0009 04:08:49 Check angles 04:08:49 SkyScan query 04:08:50 SkyScan query done: ret=0 az=40.86<-2724 ze=94.485<-5701 Statuses=0009 0009 04:08:50 Msec=2250 True Az=40.86 Ze=94.485 Az status=0009 Ze status=0009 04:08:50 Check angles 04:08:50 SkyScan query 04:08:51 SkyScan query done: ret=0 az=40.995<-2733 ze=73.095<-7127 Statuses=0008 0009 04:08:51 Msec=3000 True Az=40.995 Ze=73.095 Az status=0008 Ze status=0009 04:08:51 Check angles 04:08:51 SkyScan query 04:08:51 SkyScan query done: ret=0 az=40.995<-2733 ze=52.62<-8492 Statuses=0008 0009 04:08:51 Msec=3750 True Az=40.995 Ze=52.62 Az status=0008 Ze status=0009 04:08:52 Check angles 04:08:52 SkyScan query 04:08:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:08:52 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:08:52 Message to Master queued w/err=0: serial=52613 error=0 04:08:57 Received message from Master: op=Filter serial=52614 04:08:57 Color wheel filter change from 0 to 0 04:08:57 FLIGetFilterPos err=0 currentPosition=0 04:08:57 FLIGetStepsRemaining err=0 RemainingSteps=0 04:08:57 Filter is already there-color wheel unchanged 04:08:57 Received message from Master: op=Shutter serial=52615 04:08:57 Shutter LASER close 04:08:57 Received message from Camera: op=State serial=52617 04:08:57 GetSingleValue result=40 Value=cccccccc 04:08:57 SkyScan query 04:08:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:08:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:58 Parameters OK 04:08:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:58 Set A/D data flow result=40 04:08:58 Set A/D channel type result=40 04:08:58 Set A/D encoding result=40 04:08:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:58 Set channel filter=0.000000e+000 result=40 04:08:58 Config A/D Result=40 04:08:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:58 Get A/D filter: -9.255963e+061 result=40 04:08:58 Get A/D value=-858993460 result=40 04:08:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:58 Parameters OK 04:08:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:58 Set A/D data flow result=40 04:08:58 Set A/D channel type result=40 04:08:58 Set A/D encoding result=40 04:08:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:58 Set channel filter=0.000000e+000 result=40 04:08:58 Config A/D Result=40 04:08:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:58 Get A/D filter: -9.255963e+061 result=40 04:08:58 Get A/D value=-858993460 result=40 04:08:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:08:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:08:58 Aux= 04:08:58 Message to Camera, serial 52617 queued 04:09:35 Received message from Master: op=PointingHead serial=52630 04:09:35 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:09:35 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:09:35 Point started: ret=0 04:09:35 point_skyscan result=0 04:09:36 Check angles 04:09:36 SkyScan query 04:09:37 SkyScan query done: ret=0 az=63.75<-4250 ze=66.555<-7563 Statuses=0009 0008 04:09:37 Msec=0 True Az=63.75 Ze=66.555 Az status=0009 Ze status=0008 04:09:37 Check angles 04:09:37 SkyScan query 04:09:37 SkyScan query done: ret=0 az=81.15<-5410 ze=66.495<-7567 Statuses=0009 0008 04:09:37 Msec=750 True Az=81.15 Ze=66.495 Az status=0009 Ze status=0008 04:09:37 Check angles 04:09:37 SkyScan query 04:09:38 SkyScan query done: ret=0 az=98.67<-6578 ze=66.495<-7567 Statuses=0009 0008 04:09:38 Msec=1500 True Az=98.67 Ze=66.495 Az status=0009 Ze status=0008 04:09:38 Check angles 04:09:38 SkyScan query 04:09:39 SkyScan query done: ret=0 az=116.265<-7751 ze=66.495<-7567 Statuses=0009 0008 04:09:39 Msec=2250 True Az=116.265 Ze=66.495 Az status=0009 Ze status=0008 04:09:39 Check angles 04:09:39 SkyScan query 04:09:40 SkyScan query done: ret=0 az=133.77<-8918 ze=66.495<-7567 Statuses=0009 0008 04:09:40 Msec=3000 True Az=133.77 Ze=66.495 Az status=0009 Ze status=0008 04:09:40 Check angles 04:09:40 SkyScan query 04:09:40 SkyScan query done: ret=0 az=151.125<-10075 ze=66.495<-7567 Statuses=0009 0008 04:09:40 Msec=3750 True Az=151.125 Ze=66.495 Az status=0009 Ze status=0008 04:09:40 Check angles 04:09:40 SkyScan query 04:09:41 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 04:09:41 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 04:09:41 Message to Master queued w/err=0: serial=52630 error=0 04:09:46 Received message from Master: op=Filter serial=52631 04:09:46 Color wheel filter change from 0 to 0 04:09:46 FLIGetFilterPos err=0 currentPosition=0 04:09:46 FLIGetStepsRemaining err=0 RemainingSteps=0 04:09:46 Filter is already there-color wheel unchanged 04:09:46 Received message from Master: op=Shutter serial=52632 04:09:46 Shutter LASER close 04:09:46 Received message from Camera: op=State serial=52634 04:09:46 GetSingleValue result=40 Value=cccccccc 04:09:46 SkyScan query 04:09:47 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:09:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:47 Parameters OK 04:09:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:47 Set A/D data flow result=40 04:09:47 Set A/D channel type result=40 04:09:47 Set A/D encoding result=40 04:09:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:47 Set channel filter=0.000000e+000 result=40 04:09:47 Config A/D Result=40 04:09:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:47 Get A/D filter: -9.255963e+061 result=40 04:09:47 Get A/D value=-858993460 result=40 04:09:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:47 Parameters OK 04:09:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:47 Set A/D data flow result=40 04:09:47 Set A/D channel type result=40 04:09:47 Set A/D encoding result=40 04:09:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:47 Set channel filter=0.000000e+000 result=40 04:09:47 Config A/D Result=40 04:09:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:47 Get A/D filter: -9.255963e+061 result=40 04:09:47 Get A/D value=-858993460 result=40 04:09:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:47 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:09:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:09:47 Aux= 04:09:47 Message to Camera, serial 52634 queued 04:10:24 Received message from Master: op=PointingHead serial=52647 04:10:24 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:10:24 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:10:24 Point started: ret=0 04:10:24 point_skyscan result=0 04:10:25 Check angles 04:10:25 SkyScan query 04:10:25 SkyScan query done: ret=0 az=135.06<-9004 ze=36.795<-9547 Statuses=0009 0009 04:10:25 Msec=0 True Az=135.06 Ze=36.795 Az status=0009 Ze status=0009 04:10:25 Check angles 04:10:25 SkyScan query 04:10:26 SkyScan query done: ret=0 az=117.555<-7837 ze=15.84<-10944 Statuses=0009 0009 04:10:26 Msec=750 True Az=117.555 Ze=15.84 Az status=0009 Ze status=0009 04:10:26 Check angles 04:10:26 SkyScan query 04:10:27 SkyScan query done: ret=0 az=100.2<-6680 ze=-5.13<-12342 Statuses=0009 0009 04:10:27 Msec=1500 True Az=100.2 Ze=-5.13 Az status=0009 Ze status=0009 04:10:27 Check angles 04:10:27 SkyScan query 04:10:28 SkyScan query done: ret=0 az=82.71<-5514 ze=-26.085<-13739 Statuses=0009 0009 04:10:28 Msec=2250 True Az=82.71 Ze=-26.085 Az status=0009 Ze status=0009 04:10:28 Check angles 04:10:28 SkyScan query 04:10:28 SkyScan query done: ret=0 az=65.205<-4347 ze=-38.565<-14571 Statuses=0009 0008 04:10:28 Msec=3000 True Az=65.205 Ze=-38.565 Az status=0009 Ze status=0008 04:10:28 Check angles 04:10:28 SkyScan query 04:10:29 SkyScan query done: ret=0 az=47.805<-3187 ze=-38.535<-14569 Statuses=0009 0008 04:10:29 Msec=3750 True Az=47.805 Ze=-38.535 Az status=0009 Ze status=0008 04:10:29 Check angles 04:10:29 SkyScan query 04:10:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:10:30 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:10:30 Message to Master queued w/err=0: serial=52647 error=0 04:10:35 Received message from Master: op=Filter serial=52648 04:10:35 Color wheel filter change from 0 to 0 04:10:35 FLIGetFilterPos err=0 currentPosition=0 04:10:35 FLIGetStepsRemaining err=0 RemainingSteps=0 04:10:35 Filter is already there-color wheel unchanged 04:10:35 Received message from Master: op=Shutter serial=52649 04:10:35 Shutter LASER close 04:10:35 Received message from Camera: op=State serial=52651 04:10:35 GetSingleValue result=40 Value=cccccccc 04:10:35 SkyScan query 04:10:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:10:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:36 Parameters OK 04:10:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:36 Set A/D data flow result=40 04:10:36 Set A/D channel type result=40 04:10:36 Set A/D encoding result=40 04:10:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:36 Set channel filter=0.000000e+000 result=40 04:10:36 Config A/D Result=40 04:10:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:36 Get A/D filter: -9.255963e+061 result=40 04:10:36 Get A/D value=-858993460 result=40 04:10:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:36 Parameters OK 04:10:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:36 Set A/D data flow result=40 04:10:36 Set A/D channel type result=40 04:10:36 Set A/D encoding result=40 04:10:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:36 Set channel filter=0.000000e+000 result=40 04:10:36 Config A/D Result=40 04:10:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:36 Get A/D filter: -9.255963e+061 result=40 04:10:36 Get A/D value=-858993460 result=40 04:10:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:10:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:10:36 Aux= 04:10:36 Message to Camera, serial 52651 queued 04:11:12 Received message from Master: op=PointingHead serial=52664 04:11:12 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:11:12 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:11:13 Point started: ret=0 04:11:13 point_skyscan result=0 04:11:14 Check angles 04:11:14 SkyScan query 04:11:14 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.505<-16567 Statuses=0009 0009 04:11:14 Msec=0 True Az=64.245 Ze=-68.505 Az status=0009 Ze status=0009 04:11:14 Check angles 04:11:14 SkyScan query 04:11:15 SkyScan query done: ret=0 az=81.51<-5434 ze=-89.49<-17966 Statuses=0009 0009 04:11:15 Msec=750 True Az=81.51 Ze=-89.49 Az status=0009 Ze status=0009 04:11:15 Check angles 04:11:15 SkyScan query 04:11:16 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.445<-19363 Statuses=0009 0009 04:11:16 Msec=1500 True Az=99.12 Ze=-110.445 Az status=0009 Ze status=0009 04:11:16 Check angles 04:11:16 SkyScan query 04:11:16 SkyScan query done: ret=0 az=116.685<-7779 ze=-131.385<-20759 Statuses=0009 0009 04:11:16 Msec=2250 True Az=116.685 Ze=-131.385 Az status=0009 Ze status=0009 04:11:17 Check angles 04:11:17 SkyScan query 04:11:17 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 04:11:17 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 04:11:17 Check angles 04:11:17 SkyScan query 04:11:18 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:11:18 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:11:18 Message to Master queued w/err=0: serial=52664 error=0 04:11:23 Received message from Master: op=Filter serial=52665 04:11:23 Color wheel filter change from 0 to 0 04:11:23 FLIGetFilterPos err=0 currentPosition=0 04:11:23 FLIGetStepsRemaining err=0 RemainingSteps=0 04:11:23 Filter is already there-color wheel unchanged 04:11:23 Received message from Master: op=Shutter serial=52666 04:11:23 Shutter LASER close 04:11:23 Received message from Camera: op=State serial=52668 04:11:23 GetSingleValue result=40 Value=cccccccc 04:11:23 SkyScan query 04:11:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:11:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:24 Parameters OK 04:11:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:24 Set A/D data flow result=40 04:11:24 Set A/D channel type result=40 04:11:24 Set A/D encoding result=40 04:11:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:24 Set channel filter=0.000000e+000 result=40 04:11:24 Config A/D Result=40 04:11:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:24 Get A/D filter: -9.255963e+061 result=40 04:11:24 Get A/D value=-858993460 result=40 04:11:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:24 Parameters OK 04:11:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:24 Set A/D data flow result=40 04:11:24 Set A/D channel type result=40 04:11:24 Set A/D encoding result=40 04:11:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:24 Set channel filter=0.000000e+000 result=40 04:11:24 Config A/D Result=40 04:11:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:24 Get A/D filter: -9.255963e+061 result=40 04:11:24 Get A/D value=-858993460 result=40 04:11:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:24 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:11:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:11:24 Aux= 04:11:24 Message to Camera, serial 52668 queued 04:12:01 Received message from Master: op=PointingHead serial=52681 04:12:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:12:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:12:01 Point started: ret=0 04:12:01 point_skyscan result=0 04:12:02 Check angles 04:12:02 SkyScan query 04:12:02 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.315<-23421 Statuses=0009 0009 04:12:02 Msec=0 True Az=113.01 Ze=-171.315 Az status=0009 Ze status=0009 04:12:02 Check angles 04:12:02 SkyScan query 04:12:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:12:03 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:12:03 Message to Master queued w/err=0: serial=52681 error=0 04:12:08 Received message from Master: op=Filter serial=52682 04:12:08 Color wheel filter change from 0 to 0 04:12:08 FLIGetFilterPos err=0 currentPosition=0 04:12:08 FLIGetStepsRemaining err=0 RemainingSteps=0 04:12:08 Filter is already there-color wheel unchanged 04:12:08 Received message from Master: op=Shutter serial=52683 04:12:08 Shutter LASER open 04:12:08 Received message from Camera: op=State serial=52685 04:12:08 GetSingleValue result=40 Value=cccccccc 04:12:08 SkyScan query 04:12:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:12:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:09 Parameters OK 04:12:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:09 Set A/D data flow result=40 04:12:09 Set A/D channel type result=40 04:12:09 Set A/D encoding result=40 04:12:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:09 Set channel filter=0.000000e+000 result=40 04:12:09 Config A/D Result=40 04:12:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:09 Get A/D filter: -9.255963e+061 result=40 04:12:09 Get A/D value=-858993460 result=40 04:12:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:09 Parameters OK 04:12:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:09 Set A/D data flow result=40 04:12:09 Set A/D channel type result=40 04:12:09 Set A/D encoding result=40 04:12:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:09 Set channel filter=0.000000e+000 result=40 04:12:09 Config A/D Result=40 04:12:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:09 Get A/D filter: -9.255963e+061 result=40 04:12:09 Get A/D value=-858993460 result=40 04:12:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:09 Aux= 04:12:09 Message to Camera, serial 52685 queued 04:12:17 Received message from Master: op=Shutter serial=52695 04:12:17 Shutter LASER close 04:12:18 Received message from Master: op=PointingHead serial=52699 04:12:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:12:18 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:12:18 Point started: ret=0 04:12:18 point_skyscan result=0 04:12:19 Check angles 04:12:19 SkyScan query 04:12:20 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.55<-21570 Statuses=0009 0009 04:12:20 Msec=0 True Az=135.705 Ze=-143.55 Az status=0009 Ze status=0009 04:12:20 Check angles 04:12:20 SkyScan query 04:12:20 SkyScan query done: ret=0 az=153.15<-10210 ze=-122.61<-20174 Statuses=0009 0009 04:12:20 Msec=750 True Az=153.15 Ze=-122.61 Az status=0009 Ze status=0009 04:12:20 Check angles 04:12:20 SkyScan query 04:12:21 SkyScan query done: ret=0 az=170.97<-11398 ze=-101.22<-18748 Statuses=0009 0009 04:12:21 Msec=1500 True Az=170.97 Ze=-101.22 Az status=0009 Ze status=0009 04:12:21 Check angles 04:12:21 SkyScan query 04:12:22 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.815<-17321 Statuses=0008 0009 04:12:22 Msec=2250 True Az=176.025 Ze=-79.815 Az status=0008 Ze status=0009 04:12:22 Check angles 04:12:22 SkyScan query 04:12:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.83<-15922 Statuses=0008 0009 04:12:23 Msec=3000 True Az=175.995 Ze=-58.83 Az status=0008 Ze status=0009 04:12:23 Check angles 04:12:23 SkyScan query 04:12:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:12:23 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:12:23 Message to Master queued w/err=0: serial=52699 error=0 04:12:28 Received message from Master: op=Filter serial=52700 04:12:28 Color wheel filter change from 0 to 0 04:12:28 FLIGetFilterPos err=0 currentPosition=0 04:12:28 FLIGetStepsRemaining err=0 RemainingSteps=0 04:12:28 Filter is already there-color wheel unchanged 04:12:29 Received message from Master: op=Shutter serial=52701 04:12:29 Shutter LASER close 04:12:29 Received message from Camera: op=State serial=52703 04:12:29 GetSingleValue result=40 Value=cccccccc 04:12:29 SkyScan query 04:12:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:12:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:29 Parameters OK 04:12:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:29 Set A/D data flow result=40 04:12:29 Set A/D channel type result=40 04:12:29 Set A/D encoding result=40 04:12:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:29 Set channel filter=0.000000e+000 result=40 04:12:29 Config A/D Result=40 04:12:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:29 Get A/D filter: -9.255963e+061 result=40 04:12:29 Get A/D value=-858993460 result=40 04:12:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:29 Parameters OK 04:12:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:29 Set A/D data flow result=40 04:12:29 Set A/D channel type result=40 04:12:29 Set A/D encoding result=40 04:12:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:29 Set channel filter=0.000000e+000 result=40 04:12:29 Config A/D Result=40 04:12:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:29 Get A/D filter: -9.255963e+061 result=40 04:12:29 Get A/D value=-858993460 result=40 04:12:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:29 Aux= 04:12:29 Message to Camera, serial 52703 queued 04:13:06 Received message from Master: op=PointingHead serial=52716 04:13:06 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:13:06 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:13:06 Point started: ret=0 04:13:06 point_skyscan result=0 04:13:07 Check angles 04:13:07 SkyScan query 04:13:08 SkyScan query done: ret=0 az=152.805<-10187 ze=-21.51<-13434 Statuses=0009 0009 04:13:08 Msec=0 True Az=152.805 Ze=-21.51 Az status=0009 Ze status=0009 04:13:08 Check angles 04:13:08 SkyScan query 04:13:09 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.54<-12036 Statuses=0009 0009 04:13:09 Msec=750 True Az=135.405 Ze=-0.54 Az status=0009 Ze status=0009 04:13:09 Check angles 04:13:09 SkyScan query 04:13:09 SkyScan query done: ret=0 az=117.435<-7829 ze=20.865<-10609 Statuses=0009 0009 04:13:09 Msec=1500 True Az=117.435 Ze=20.865 Az status=0009 Ze status=0009 04:13:09 Check angles 04:13:09 SkyScan query 04:13:10 SkyScan query done: ret=0 az=100.02<-6668 ze=41.79<-9214 Statuses=0009 0009 04:13:10 Msec=2250 True Az=100.02 Ze=41.79 Az status=0009 Ze status=0009 04:13:10 Check angles 04:13:10 SkyScan query 04:13:11 SkyScan query done: ret=0 az=86.07<-5738 ze=51.555<-8563 Statuses=0009 0008 04:13:11 Msec=3000 True Az=86.07 Ze=51.555 Az status=0009 Ze status=0008 04:13:11 Check angles 04:13:11 SkyScan query 04:13:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:13:12 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:13:12 Message to Master queued w/err=0: serial=52716 error=0 04:13:17 Received message from Master: op=Filter serial=52717 04:13:17 Color wheel filter change from 0 to 0 04:13:17 FLIGetFilterPos err=0 currentPosition=0 04:13:17 FLIGetStepsRemaining err=0 RemainingSteps=0 04:13:17 Filter is already there-color wheel unchanged 04:13:17 Received message from Master: op=Shutter serial=52718 04:13:17 Shutter LASER close 04:13:17 Received message from Camera: op=State serial=52720 04:13:17 GetSingleValue result=40 Value=cccccccc 04:13:17 SkyScan query 04:13:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:13:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:17 Parameters OK 04:13:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:17 Set A/D data flow result=40 04:13:17 Set A/D channel type result=40 04:13:17 Set A/D encoding result=40 04:13:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:17 Set channel filter=0.000000e+000 result=40 04:13:17 Config A/D Result=40 04:13:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:17 Get A/D filter: -9.255963e+061 result=40 04:13:17 Get A/D value=-858993460 result=40 04:13:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:17 Parameters OK 04:13:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:17 Set A/D data flow result=40 04:13:17 Set A/D channel type result=40 04:13:17 Set A/D encoding result=40 04:13:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:17 Set channel filter=0.000000e+000 result=40 04:13:17 Config A/D Result=40 04:13:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:17 Get A/D filter: -9.255963e+061 result=40 04:13:17 Get A/D value=-858993460 result=40 04:13:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:13:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:13:17 Aux= 04:13:17 Message to Camera, serial 52720 queued 04:13:54 Received message from Master: op=PointingHead serial=52733 04:13:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:13:54 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:13:55 Point started: ret=0 04:13:55 point_skyscan result=0 04:13:55 Check angles 04:13:55 SkyScan query 04:13:56 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 04:13:56 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 04:13:56 Check angles 04:13:56 SkyScan query 04:13:57 SkyScan query done: ret=0 az=127.23<-8482 ze=38.505<-9433 Statuses=0009 0008 04:13:57 Msec=750 True Az=127.23 Ze=38.505 Az status=0009 Ze status=0008 04:13:57 Check angles 04:13:57 SkyScan query 04:13:57 SkyScan query done: ret=0 az=145.05<-9670 ze=38.505<-9433 Statuses=0009 0008 04:13:57 Msec=1500 True Az=145.05 Ze=38.505 Az status=0009 Ze status=0008 04:13:58 Check angles 04:13:58 SkyScan query 04:13:58 SkyScan query done: ret=0 az=162.525<-10835 ze=38.505<-9433 Statuses=0009 0008 04:13:58 Msec=2250 True Az=162.525 Ze=38.505 Az status=0009 Ze status=0008 04:13:58 Check angles 04:13:58 SkyScan query 04:13:59 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:13:59 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:13:59 Check angles 04:13:59 SkyScan query 04:14:00 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:14:00 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:14:00 Message to Master queued w/err=0: serial=52733 error=0 04:14:05 Received message from Master: op=Filter serial=52734 04:14:05 Color wheel filter change from 0 to 0 04:14:05 FLIGetFilterPos err=0 currentPosition=0 04:14:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:14:05 Filter is already there-color wheel unchanged 04:14:05 Received message from Master: op=Shutter serial=52735 04:14:05 Shutter LASER close 04:14:05 Received message from Camera: op=State serial=52737 04:14:05 GetSingleValue result=40 Value=cccccccc 04:14:05 SkyScan query 04:14:05 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:14:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:05 Parameters OK 04:14:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:05 Set A/D data flow result=40 04:14:05 Set A/D channel type result=40 04:14:05 Set A/D encoding result=40 04:14:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:05 Set channel filter=0.000000e+000 result=40 04:14:05 Config A/D Result=40 04:14:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:05 Get A/D filter: -9.255963e+061 result=40 04:14:05 Get A/D value=-858993460 result=40 04:14:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:05 Parameters OK 04:14:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:05 Set A/D data flow result=40 04:14:05 Set A/D channel type result=40 04:14:05 Set A/D encoding result=40 04:14:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:05 Set channel filter=0.000000e+000 result=40 04:14:05 Config A/D Result=40 04:14:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:05 Get A/D filter: -9.255963e+061 result=40 04:14:05 Get A/D value=-858993460 result=40 04:14:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:14:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:14:05 Aux= 04:14:05 Message to Camera, serial 52737 queued 04:14:41 Received message from Master: op=PointingHead serial=52749 04:14:41 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:14:41 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:14:42 Point started: ret=0 04:14:42 point_skyscan result=0 04:14:42 Check angles 04:14:42 SkyScan query 04:14:43 SkyScan query done: ret=0 az=152.745<-10183 ze=8.355<-11443 Statuses=0009 0009 04:14:43 Msec=0 True Az=152.745 Ze=8.355 Az status=0009 Ze status=0009 04:14:43 Check angles 04:14:43 SkyScan query 04:14:44 SkyScan query done: ret=0 az=135.345<-9023 ze=-12.585<-12839 Statuses=0009 0009 04:14:44 Msec=750 True Az=135.345 Ze=-12.585 Az status=0009 Ze status=0009 04:14:44 Check angles 04:14:44 SkyScan query 04:14:45 SkyScan query done: ret=0 az=117.315<-7821 ze=-33.975<-14265 Statuses=0009 0009 04:14:45 Msec=1500 True Az=117.315 Ze=-33.975 Az status=0009 Ze status=0009 04:14:45 Check angles 04:14:45 SkyScan query 04:14:45 SkyScan query done: ret=0 az=99.69<-6646 ze=-51.57<-15438 Statuses=0009 0009 04:14:45 Msec=2250 True Az=99.69 Ze=-51.57 Az status=0009 Ze status=0009 04:14:45 Check angles 04:14:45 SkyScan query 04:14:46 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 04:14:46 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 04:14:46 Check angles 04:14:46 SkyScan query 04:14:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:14:47 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:14:47 Message to Master queued w/err=0: serial=52749 error=0 04:14:52 Received message from Master: op=Filter serial=52750 04:14:52 Color wheel filter change from 0 to 0 04:14:52 FLIGetFilterPos err=0 currentPosition=0 04:14:52 FLIGetStepsRemaining err=0 RemainingSteps=0 04:14:52 Filter is already there-color wheel unchanged 04:14:52 Received message from Master: op=Shutter serial=52751 04:14:52 Shutter LASER close 04:14:52 Received message from Camera: op=State serial=52753 04:14:52 GetSingleValue result=40 Value=cccccccc 04:14:52 SkyScan query 04:14:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:14:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:53 Parameters OK 04:14:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:53 Set A/D data flow result=40 04:14:53 Set A/D channel type result=40 04:14:53 Set A/D encoding result=40 04:14:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:53 Set channel filter=0.000000e+000 result=40 04:14:53 Config A/D Result=40 04:14:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:53 Get A/D filter: -9.255963e+061 result=40 04:14:53 Get A/D value=-858993460 result=40 04:14:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:53 Parameters OK 04:14:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:53 Set A/D data flow result=40 04:14:53 Set A/D channel type result=40 04:14:53 Set A/D encoding result=40 04:14:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:53 Set channel filter=0.000000e+000 result=40 04:14:53 Config A/D Result=40 04:14:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:53 Get A/D filter: -9.255963e+061 result=40 04:14:53 Get A/D value=-858993460 result=40 04:14:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:14:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:14:53 Aux= 04:14:53 Message to Camera, serial 52753 queued 04:15:29 Received message from Master: op=Identify serial=52762 04:15:29 Received message from Master: op=PointingHead serial=52769 04:15:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:15:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:15:30 Point started: ret=0 04:15:30 point_skyscan result=0 04:15:31 Check angles 04:15:31 SkyScan query 04:15:31 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.69<-17446 Statuses=0009 0009 04:15:31 Msec=0 True Az=109.395 Ze=-81.69 Az status=0009 Ze status=0009 04:15:31 Check angles 04:15:31 SkyScan query 04:15:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.66<-18844 Statuses=0008 0009 04:15:32 Msec=750 True Az=112.995 Ze=-102.66 Az status=0008 Ze status=0009 04:15:32 Check angles 04:15:32 SkyScan query 04:15:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.05<-20270 Statuses=0008 0009 04:15:33 Msec=1500 True Az=112.995 Ze=-124.05 Az status=0008 Ze status=0009 04:15:33 Check angles 04:15:33 SkyScan query 04:15:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.065<-21671 Statuses=0008 0009 04:15:33 Msec=2250 True Az=112.995 Ze=-145.065 Az status=0008 Ze status=0009 04:15:34 Check angles 04:15:34 SkyScan query 04:15:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.915<-23061 Statuses=0008 0009 04:15:34 Msec=3000 True Az=112.995 Ze=-165.915 Az status=0008 Ze status=0009 04:15:34 Check angles 04:15:34 SkyScan query 04:15:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:15:35 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:15:35 Message to Master queued w/err=0: serial=52769 error=0 04:15:40 Received message from Master: op=Filter serial=52770 04:15:40 Color wheel filter change from 0 to 0 04:15:40 FLIGetFilterPos err=0 currentPosition=0 04:15:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:15:40 Filter is already there-color wheel unchanged 04:15:40 Received message from Master: op=Shutter serial=52771 04:15:40 Shutter LASER open 04:15:40 Received message from Camera: op=State serial=52773 04:15:40 GetSingleValue result=40 Value=cccccccc 04:15:40 SkyScan query 04:15:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:15:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:41 Parameters OK 04:15:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:41 Set A/D data flow result=40 04:15:41 Set A/D channel type result=40 04:15:41 Set A/D encoding result=40 04:15:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:41 Set channel filter=0.000000e+000 result=40 04:15:41 Config A/D Result=40 04:15:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:41 Get A/D filter: -9.255963e+061 result=40 04:15:41 Get A/D value=-858993460 result=40 04:15:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:41 Parameters OK 04:15:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:41 Set A/D data flow result=40 04:15:41 Set A/D channel type result=40 04:15:41 Set A/D encoding result=40 04:15:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:41 Set channel filter=0.000000e+000 result=40 04:15:41 Config A/D Result=40 04:15:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:41 Get A/D filter: -9.255963e+061 result=40 04:15:41 Get A/D value=-858993460 result=40 04:15:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:15:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:15:41 Aux= 04:15:41 Message to Camera, serial 52773 queued 04:15:49 Received message from Master: op=Shutter serial=52783 04:15:49 Shutter LASER close 04:15:50 Received message from Master: op=PointingHead serial=52787 04:15:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:15:50 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:15:50 Point started: ret=0 04:15:50 point_skyscan result=0 04:15:51 Check angles 04:15:51 SkyScan query 04:15:51 SkyScan query done: ret=0 az=89.85<-5990 ze=157.185<-1521 Statuses=0009 0009 04:15:51 Msec=0 True Az=89.85 Ze=157.185 Az status=0009 Ze status=0009 04:15:52 Check angles 04:15:52 SkyScan query 04:15:52 SkyScan query done: ret=0 az=72.315<-4821 ze=136.2<-2920 Statuses=0009 0009 04:15:52 Msec=750 True Az=72.315 Ze=136.2 Az status=0009 Ze status=0009 04:15:52 Check angles 04:15:52 SkyScan query 04:15:53 SkyScan query done: ret=0 az=54.975<-3665 ze=115.275<-4315 Statuses=0009 0009 04:15:53 Msec=1500 True Az=54.975 Ze=115.275 Az status=0009 Ze status=0009 [UTC 2018-12-11 04:15:53] 04:15:53 Check angles 04:15:53 SkyScan query 04:15:54 SkyScan query done: ret=0 az=41.055<-2737 ze=92.58<-5828 Statuses=0009 0009 04:15:54 Msec=2250 True Az=41.055 Ze=92.58 Az status=0009 Ze status=0009 04:15:54 Check angles 04:15:54 SkyScan query 04:15:54 SkyScan query done: ret=0 az=40.995<-2733 ze=72.87<-7142 Statuses=0008 0009 04:15:54 Msec=3000 True Az=40.995 Ze=72.87 Az status=0008 Ze status=0009 [UTC 2018-12-11 04:15:54] 04:15:55 Check angles 04:15:55 SkyScan query 04:15:55 SkyScan query done: ret=0 az=40.995<-2733 ze=52.5<-8500 Statuses=0008 0009 04:15:55 Msec=3750 True Az=40.995 Ze=52.5 Az status=0008 Ze status=0009 04:15:55 Check angles 04:15:55 SkyScan query 04:15:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:15:56 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:15:56 Message to Master queued w/err=0: serial=52787 error=0 04:16:01 Received message from Master: op=Filter serial=52788 04:16:01 Color wheel filter change from 0 to 0 04:16:01 FLIGetFilterPos err=0 currentPosition=0 04:16:01 FLIGetStepsRemaining err=0 RemainingSteps=0 04:16:01 Filter is already there-color wheel unchanged 04:16:01 Received message from Master: op=Shutter serial=52789 04:16:01 Shutter LASER close 04:16:01 Received message from Camera: op=State serial=52791 04:16:01 GetSingleValue result=40 Value=cccccccc 04:16:01 SkyScan query 04:16:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:16:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:02 Parameters OK 04:16:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:02 Set A/D data flow result=40 04:16:02 Set A/D channel type result=40 04:16:02 Set A/D encoding result=40 04:16:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:02 Set channel filter=0.000000e+000 result=40 04:16:02 Config A/D Result=40 04:16:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:02 Get A/D filter: -9.255963e+061 result=40 04:16:02 Get A/D value=-858993460 result=40 04:16:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:02 Parameters OK 04:16:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:02 Set A/D data flow result=40 04:16:02 Set A/D channel type result=40 04:16:02 Set A/D encoding result=40 04:16:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:02 Set channel filter=0.000000e+000 result=40 04:16:02 Config A/D Result=40 04:16:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:02 Get A/D filter: -9.255963e+061 result=40 04:16:02 Get A/D value=-858993460 result=40 04:16:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:16:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:16:02 Aux= 04:16:02 Message to Camera, serial 52791 queued 04:16:38 Received message from Master: op=PointingHead serial=52803 04:16:38 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:16:38 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:16:38 Point started: ret=0 04:16:38 point_skyscan result=0 04:16:39 Check angles 04:16:39 SkyScan query 04:16:39 SkyScan query done: ret=0 az=63.96<-4264 ze=66.555<-7563 Statuses=0009 0008 04:16:39 Msec=0 True Az=63.96 Ze=66.555 Az status=0009 Ze status=0008 04:16:40 Check angles 04:16:40 SkyScan query 04:16:40 SkyScan query done: ret=0 az=81.36<-5424 ze=66.495<-7567 Statuses=0009 0008 04:16:40 Msec=750 True Az=81.36 Ze=66.495 Az status=0009 Ze status=0008 04:16:40 Check angles 04:16:40 SkyScan query 04:16:41 SkyScan query done: ret=0 az=98.97<-6598 ze=66.495<-7567 Statuses=0009 0008 04:16:41 Msec=1500 True Az=98.97 Ze=66.495 Az status=0009 Ze status=0008 04:16:41 Check angles 04:16:41 SkyScan query 04:16:42 SkyScan query done: ret=0 az=116.67<-7778 ze=66.495<-7567 Statuses=0009 0008 04:16:42 Msec=2250 True Az=116.67 Ze=66.495 Az status=0009 Ze status=0008 04:16:42 Check angles 04:16:42 SkyScan query 04:16:42 SkyScan query done: ret=0 az=134.025<-8935 ze=66.495<-7567 Statuses=0009 0008 04:16:42 Msec=3000 True Az=134.025 Ze=66.495 Az status=0009 Ze status=0008 04:16:43 Check angles 04:16:43 SkyScan query 04:16:43 SkyScan query done: ret=0 az=151.395<-10093 ze=66.495<-7567 Statuses=0009 0008 04:16:43 Msec=3750 True Az=151.395 Ze=66.495 Az status=0009 Ze status=0008 04:16:43 Check angles 04:16:43 SkyScan query 04:16:44 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:16:44 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 04:16:44 Message to Master queued w/err=0: serial=52803 error=0 04:16:49 Received message from Master: op=Filter serial=52804 04:16:49 Color wheel filter change from 0 to 0 04:16:49 FLIGetFilterPos err=0 currentPosition=0 04:16:49 FLIGetStepsRemaining err=0 RemainingSteps=0 04:16:49 Filter is already there-color wheel unchanged 04:16:49 Received message from Master: op=Shutter serial=52805 04:16:49 Shutter LASER close 04:16:49 Received message from Camera: op=State serial=52807 04:16:49 GetSingleValue result=40 Value=cccccccc 04:16:49 SkyScan query 04:16:50 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:16:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:50 Parameters OK 04:16:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:50 Set A/D data flow result=40 04:16:50 Set A/D channel type result=40 04:16:50 Set A/D encoding result=40 04:16:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:50 Set channel filter=0.000000e+000 result=40 04:16:50 Config A/D Result=40 04:16:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:50 Get A/D filter: -9.255963e+061 result=40 04:16:50 Get A/D value=-858993460 result=40 04:16:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:50 Parameters OK 04:16:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:50 Set A/D data flow result=40 04:16:50 Set A/D channel type result=40 04:16:50 Set A/D encoding result=40 04:16:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:50 Set channel filter=0.000000e+000 result=40 04:16:50 Config A/D Result=40 04:16:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:50 Get A/D filter: -9.255963e+061 result=40 04:16:50 Get A/D value=-858993460 result=40 04:16:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:50 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:16:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:16:50 Aux= 04:16:50 Message to Camera, serial 52807 queued 04:17:26 Received message from Master: op=PointingHead serial=52820 04:17:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:17:26 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:17:27 Point started: ret=0 04:17:27 point_skyscan result=0 04:17:28 Check angles 04:17:28 SkyScan query 04:17:28 SkyScan query done: ret=0 az=134.985<-8999 ze=36.675<-9555 Statuses=0009 0009 04:17:28 Msec=0 True Az=134.985 Ze=36.675 Az status=0009 Ze status=0009 04:17:28 Check angles 04:17:28 SkyScan query 04:17:29 SkyScan query done: ret=0 az=117.495<-7833 ze=15.75<-10950 Statuses=0009 0009 04:17:29 Msec=750 True Az=117.495 Ze=15.75 Az status=0009 Ze status=0009 04:17:29 Check angles 04:17:29 SkyScan query 04:17:30 SkyScan query done: ret=0 az=100.08<-6672 ze=-5.235<-12349 Statuses=0009 0009 04:17:30 Msec=1500 True Az=100.08 Ze=-5.235 Az status=0009 Ze status=0009 04:17:30 Check angles 04:17:30 SkyScan query 04:17:30 SkyScan query done: ret=0 az=82.605<-5507 ze=-26.175<-13745 Statuses=0009 0009 04:17:30 Msec=2250 True Az=82.605 Ze=-26.175 Az status=0009 Ze status=0009 04:17:31 Check angles 04:17:31 SkyScan query 04:17:31 SkyScan query done: ret=0 az=65.07<-4338 ze=-38.565<-14571 Statuses=0009 0008 04:17:31 Msec=3000 True Az=65.07 Ze=-38.565 Az status=0009 Ze status=0008 04:17:31 Check angles 04:17:31 SkyScan query 04:17:32 SkyScan query done: ret=0 az=47.685<-3179 ze=-38.535<-14569 Statuses=0009 0008 04:17:32 Msec=3750 True Az=47.685 Ze=-38.535 Az status=0009 Ze status=0008 04:17:32 Check angles 04:17:32 SkyScan query 04:17:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:17:33 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:17:33 Message to Master queued w/err=0: serial=52820 error=0 04:17:38 Received message from Master: op=Filter serial=52821 04:17:38 Color wheel filter change from 0 to 0 04:17:38 FLIGetFilterPos err=0 currentPosition=0 04:17:38 FLIGetStepsRemaining err=0 RemainingSteps=0 04:17:38 Filter is already there-color wheel unchanged 04:17:38 Received message from Master: op=Shutter serial=52822 04:17:38 Shutter LASER close 04:17:38 Received message from Camera: op=State serial=52824 04:17:38 GetSingleValue result=40 Value=cccccccc 04:17:38 SkyScan query 04:17:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:17:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:38 Parameters OK 04:17:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:38 Set A/D data flow result=40 04:17:38 Set A/D channel type result=40 04:17:38 Set A/D encoding result=40 04:17:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:38 Set channel filter=0.000000e+000 result=40 04:17:38 Config A/D Result=40 04:17:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:38 Get A/D filter: -9.255963e+061 result=40 04:17:38 Get A/D value=-858993460 result=40 04:17:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:38 Parameters OK 04:17:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:38 Set A/D data flow result=40 04:17:38 Set A/D channel type result=40 04:17:38 Set A/D encoding result=40 04:17:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:38 Set channel filter=0.000000e+000 result=40 04:17:38 Config A/D Result=40 04:17:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:38 Get A/D filter: -9.255963e+061 result=40 04:17:38 Get A/D value=-858993460 result=40 04:17:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:17:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:17:38 Aux= 04:17:38 Message to Camera, serial 52824 queued 04:18:15 Received message from Master: op=PointingHead serial=52837 04:18:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:18:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:18:16 Point started: ret=0 04:18:16 point_skyscan result=0 04:18:16 Check angles 04:18:16 SkyScan query 04:18:17 SkyScan query done: ret=0 az=63.72<-4248 ze=-68.025<-16535 Statuses=0009 0009 04:18:17 Msec=0 True Az=63.72 Ze=-68.025 Az status=0009 Ze status=0009 04:18:17 Check angles 04:18:17 SkyScan query 04:18:18 SkyScan query done: ret=0 az=81.105<-5407 ze=-88.995<-17933 Statuses=0009 0009 04:18:18 Msec=750 True Az=81.105 Ze=-88.995 Az status=0009 Ze status=0009 04:18:18 Check angles 04:18:18 SkyScan query 04:18:18 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.4<-19360 Statuses=0009 0009 04:18:18 Msec=1500 True Az=99.12 Ze=-110.4 Az status=0009 Ze status=0009 04:18:19 Check angles 04:18:19 SkyScan query 04:18:19 SkyScan query done: ret=0 az=117.06<-7804 ze=-131.76<-20784 Statuses=0009 0009 04:18:19 Msec=2250 True Az=117.06 Ze=-131.76 Az status=0009 Ze status=0009 04:18:19 Check angles 04:18:19 SkyScan query 04:18:20 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.555<-21437 Statuses=0009 0008 04:18:20 Msec=3000 True Az=131.145 Ze=-141.555 Az status=0009 Ze status=0008 04:18:20 Check angles 04:18:20 SkyScan query 04:18:21 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 04:18:21 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 04:18:21 Message to Master queued w/err=0: serial=52837 error=0 04:18:26 Received message from Master: op=Filter serial=52838 04:18:26 Color wheel filter change from 0 to 0 04:18:26 FLIGetFilterPos err=0 currentPosition=0 04:18:26 FLIGetStepsRemaining err=0 RemainingSteps=0 04:18:26 Filter is already there-color wheel unchanged 04:18:26 Received message from Master: op=Shutter serial=52839 04:18:26 Shutter LASER close 04:18:26 Received message from Camera: op=State serial=52841 04:18:26 GetSingleValue result=40 Value=cccccccc 04:18:26 SkyScan query 04:18:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:18:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:27 Parameters OK 04:18:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:27 Set A/D data flow result=40 04:18:27 Set A/D channel type result=40 04:18:27 Set A/D encoding result=40 04:18:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:27 Set channel filter=0.000000e+000 result=40 04:18:27 Config A/D Result=40 04:18:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:27 Get A/D filter: -9.255963e+061 result=40 04:18:27 Get A/D value=-858993460 result=40 04:18:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:27 Parameters OK 04:18:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:27 Set A/D data flow result=40 04:18:27 Set A/D channel type result=40 04:18:27 Set A/D encoding result=40 04:18:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:27 Set channel filter=0.000000e+000 result=40 04:18:27 Config A/D Result=40 04:18:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:27 Get A/D filter: -9.255963e+061 result=40 04:18:27 Get A/D value=-858993460 result=40 04:18:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:27 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:18:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:18:27 Aux= 04:18:27 Message to Camera, serial 52841 queued 04:19:03 Received message from Master: op=PointingHead serial=52854 04:19:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:19:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:19:04 Point started: ret=0 04:19:04 point_skyscan result=0 04:19:04 Check angles 04:19:04 SkyScan query 04:19:05 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 04:19:05 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 04:19:05 Check angles 04:19:05 SkyScan query 04:19:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:19:06 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:19:06 Message to Master queued w/err=0: serial=52854 error=0 04:19:11 Received message from Master: op=Filter serial=52855 04:19:11 Color wheel filter change from 0 to 0 04:19:11 FLIGetFilterPos err=0 currentPosition=0 04:19:11 FLIGetStepsRemaining err=0 RemainingSteps=0 04:19:11 Filter is already there-color wheel unchanged 04:19:11 Received message from Master: op=Shutter serial=52856 04:19:11 Shutter LASER open 04:19:11 Received message from Camera: op=State serial=52858 04:19:11 GetSingleValue result=40 Value=cccccccc 04:19:11 SkyScan query 04:19:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:19:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:12 Parameters OK 04:19:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:12 Set A/D data flow result=40 04:19:12 Set A/D channel type result=40 04:19:12 Set A/D encoding result=40 04:19:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:12 Set channel filter=0.000000e+000 result=40 04:19:12 Config A/D Result=40 04:19:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:12 Get A/D filter: -9.255963e+061 result=40 04:19:12 Get A/D value=-858993460 result=40 04:19:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:12 Parameters OK 04:19:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:12 Set A/D data flow result=40 04:19:12 Set A/D channel type result=40 04:19:12 Set A/D encoding result=40 04:19:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:12 Set channel filter=0.000000e+000 result=40 04:19:12 Config A/D Result=40 04:19:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:12 Get A/D filter: -9.255963e+061 result=40 04:19:12 Get A/D value=-858993460 result=40 04:19:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:19:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:19:12 Aux= 04:19:12 Message to Camera, serial 52858 queued 04:19:20 Received message from Master: op=Shutter serial=52868 04:19:20 Shutter LASER close 04:19:21 Received message from Master: op=PointingHead serial=52872 04:19:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:19:21 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:19:21 Point started: ret=0 04:19:21 point_skyscan result=0 04:19:22 Check angles 04:19:22 SkyScan query 04:19:22 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.07<-21538 Statuses=0009 0009 04:19:22 Msec=0 True Az=136.155 Ze=-143.07 Az status=0009 Ze status=0009 04:19:23 Check angles 04:19:23 SkyScan query 04:19:23 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.115<-20141 Statuses=0009 0009 04:19:23 Msec=750 True Az=153.585 Ze=-122.115 Az status=0009 Ze status=0009 04:19:23 Check angles 04:19:23 SkyScan query 04:19:24 SkyScan query done: ret=0 az=171<-11400 ze=-101.205<-18747 Statuses=0009 0009 04:19:24 Msec=1500 True Az=171 Ze=-101.205 Az status=0009 Ze status=0009 04:19:24 Check angles 04:19:24 SkyScan query 04:19:25 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.235<-17349 Statuses=0008 0009 04:19:25 Msec=2250 True Az=176.025 Ze=-80.235 Az status=0008 Ze status=0009 04:19:25 Check angles 04:19:25 SkyScan query 04:19:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.28<-15952 Statuses=0008 0009 04:19:25 Msec=3000 True Az=175.995 Ze=-59.28 Az status=0008 Ze status=0009 04:19:26 Check angles 04:19:26 SkyScan query 04:19:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:19:26 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:19:26 Message to Master queued w/err=0: serial=52872 error=0 04:19:31 Received message from Master: op=Filter serial=52873 04:19:31 Color wheel filter change from 0 to 0 04:19:31 FLIGetFilterPos err=0 currentPosition=0 04:19:31 FLIGetStepsRemaining err=0 RemainingSteps=0 04:19:31 Filter is already there-color wheel unchanged 04:19:31 Received message from Master: op=Shutter serial=52874 04:19:31 Shutter LASER close 04:19:32 Received message from Camera: op=State serial=52876 04:19:32 GetSingleValue result=40 Value=cccccccc 04:19:32 SkyScan query 04:19:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:19:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:32 Parameters OK 04:19:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:32 Set A/D data flow result=40 04:19:32 Set A/D channel type result=40 04:19:32 Set A/D encoding result=40 04:19:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:32 Set channel filter=0.000000e+000 result=40 04:19:32 Config A/D Result=40 04:19:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:32 Get A/D filter: -9.255963e+061 result=40 04:19:32 Get A/D value=-858993460 result=40 04:19:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:32 Parameters OK 04:19:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:32 Set A/D data flow result=40 04:19:32 Set A/D channel type result=40 04:19:32 Set A/D encoding result=40 04:19:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:32 Set channel filter=0.000000e+000 result=40 04:19:32 Config A/D Result=40 04:19:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:32 Get A/D filter: -9.255963e+061 result=40 04:19:32 Get A/D value=-858993460 result=40 04:19:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:19:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:19:32 Aux= 04:19:32 Message to Camera, serial 52876 queued 04:20:10 Received message from Master: op=PointingHead serial=52888 04:20:10 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:20:10 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:20:10 Point started: ret=0 04:20:10 point_skyscan result=0 04:20:11 Check angles 04:20:11 SkyScan query 04:20:11 SkyScan query done: ret=0 az=152.4<-10160 ze=-21.3<-13420 Statuses=0009 0009 04:20:11 Msec=0 True Az=152.4 Ze=-21.3 Az status=0009 Ze status=0009 04:20:12 Check angles 04:20:12 SkyScan query 04:20:12 SkyScan query done: ret=0 az=134.97<-8998 ze=-0.465<-12031 Statuses=0009 0009 04:20:12 Msec=750 True Az=134.97 Ze=-0.465 Az status=0009 Ze status=0009 04:20:12 Check angles 04:20:12 SkyScan query 04:20:13 SkyScan query done: ret=0 az=117.45<-7830 ze=20.235<-10651 Statuses=0009 0009 04:20:13 Msec=1500 True Az=117.45 Ze=20.235 Az status=0009 Ze status=0009 04:20:13 Check angles 04:20:13 SkyScan query 04:20:14 SkyScan query done: ret=0 az=99.705<-6647 ze=41.61<-9226 Statuses=0009 0009 04:20:14 Msec=2250 True Az=99.705 Ze=41.61 Az status=0009 Ze status=0009 04:20:14 Check angles 04:20:14 SkyScan query 04:20:14 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 04:20:14 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 04:20:15 Check angles 04:20:15 SkyScan query 04:20:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:20:15 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:20:15 Message to Master queued w/err=0: serial=52888 error=0 04:20:20 Received message from Master: op=Filter serial=52889 04:20:20 Color wheel filter change from 0 to 0 04:20:20 FLIGetFilterPos err=0 currentPosition=0 04:20:20 FLIGetStepsRemaining err=0 RemainingSteps=0 04:20:20 Filter is already there-color wheel unchanged 04:20:22 Received message from Master: op=Shutter serial=52890 04:20:22 Shutter LASER close 04:20:22 Received message from Camera: op=State serial=52892 04:20:22 GetSingleValue result=40 Value=cccccccc 04:20:22 SkyScan query 04:20:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:20:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:23 Parameters OK 04:20:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:23 Set A/D data flow result=40 04:20:23 Set A/D channel type result=40 04:20:23 Set A/D encoding result=40 04:20:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:23 Set channel filter=0.000000e+000 result=40 04:20:23 Config A/D Result=40 04:20:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:23 Get A/D filter: -9.255963e+061 result=40 04:20:23 Get A/D value=-858993460 result=40 04:20:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:23 Parameters OK 04:20:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:23 Set A/D data flow result=40 04:20:23 Set A/D channel type result=40 04:20:23 Set A/D encoding result=40 04:20:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:23 Set channel filter=0.000000e+000 result=40 04:20:23 Config A/D Result=40 04:20:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:23 Get A/D filter: -9.255963e+061 result=40 04:20:23 Get A/D value=-858993460 result=40 04:20:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:20:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:20:23 Aux= 04:20:23 Message to Camera, serial 52892 queued 04:21:00 Received message from Master: op=PointingHead serial=52904 04:21:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:21:00 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:21:01 Point started: ret=0 04:21:01 point_skyscan result=0 04:21:02 Check angles 04:21:02 SkyScan query 04:21:02 SkyScan query done: ret=0 az=109.86<-7324 ze=38.49<-9434 Statuses=0009 0008 04:21:02 Msec=0 True Az=109.86 Ze=38.49 Az status=0009 Ze status=0008 04:21:02 Check angles 04:21:02 SkyScan query 04:21:03 SkyScan query done: ret=0 az=127.335<-8489 ze=38.505<-9433 Statuses=0009 0008 04:21:03 Msec=750 True Az=127.335 Ze=38.505 Az status=0009 Ze status=0008 04:21:03 Check angles 04:21:03 SkyScan query 04:21:04 SkyScan query done: ret=0 az=145.23<-9682 ze=38.505<-9433 Statuses=0009 0008 04:21:04 Msec=1500 True Az=145.23 Ze=38.505 Az status=0009 Ze status=0008 04:21:04 Check angles 04:21:04 SkyScan query 04:21:04 SkyScan query done: ret=0 az=162.885<-10859 ze=38.505<-9433 Statuses=0009 0008 04:21:04 Msec=2250 True Az=162.885 Ze=38.505 Az status=0009 Ze status=0008 04:21:05 Check angles 04:21:05 SkyScan query 04:21:05 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 04:21:05 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 04:21:05 Check angles 04:21:05 SkyScan query 04:21:06 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:21:06 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:21:06 Message to Master queued w/err=0: serial=52904 error=0 04:21:11 Received message from Master: op=Filter serial=52905 04:21:11 Color wheel filter change from 0 to 0 04:21:11 FLIGetFilterPos err=0 currentPosition=0 04:21:11 FLIGetStepsRemaining err=0 RemainingSteps=0 04:21:11 Filter is already there-color wheel unchanged 04:21:12 Received message from Master: op=Shutter serial=52906 04:21:12 Shutter LASER close 04:21:13 Received message from Camera: op=State serial=52908 04:21:13 GetSingleValue result=40 Value=cccccccc 04:21:13 SkyScan query 04:21:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:21:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:13 Parameters OK 04:21:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:13 Set A/D data flow result=40 04:21:13 Set A/D channel type result=40 04:21:13 Set A/D encoding result=40 04:21:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:13 Set channel filter=0.000000e+000 result=40 04:21:13 Config A/D Result=40 04:21:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:13 Get A/D filter: -9.255963e+061 result=40 04:21:13 Get A/D value=-858993460 result=40 04:21:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:13 Parameters OK 04:21:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:13 Set A/D data flow result=40 04:21:13 Set A/D channel type result=40 04:21:13 Set A/D encoding result=40 04:21:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:13 Set channel filter=0.000000e+000 result=40 04:21:13 Config A/D Result=40 04:21:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:13 Get A/D filter: -9.255963e+061 result=40 04:21:13 Get A/D value=-858993460 result=40 04:21:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:21:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:21:13 Aux= 04:21:13 Message to Camera, serial 52908 queued 04:21:50 Received message from Master: op=PointingHead serial=52920 04:21:50 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:21:50 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:21:50 Point started: ret=0 04:21:50 point_skyscan result=0 04:21:51 Check angles 04:21:51 SkyScan query 04:21:52 SkyScan query done: ret=0 az=152.58<-10172 ze=8.775<-11415 Statuses=0009 0009 04:21:52 Msec=0 True Az=152.58 Ze=8.775 Az status=0009 Ze status=0009 04:21:52 Check angles 04:21:52 SkyScan query 04:21:52 SkyScan query done: ret=0 az=134.775<-8985 ze=-12.6<-12840 Statuses=0009 0009 04:21:52 Msec=750 True Az=134.775 Ze=-12.6 Az status=0009 Ze status=0009 04:21:53 Check angles 04:21:53 SkyScan query 04:21:53 SkyScan query done: ret=0 az=116.895<-7793 ze=-34.035<-14269 Statuses=0009 0009 04:21:53 Msec=1500 True Az=116.895 Ze=-34.035 Az status=0009 Ze status=0009 04:21:53 Check angles 04:21:53 SkyScan query 04:21:54 SkyScan query done: ret=0 az=99.57<-6638 ze=-51.57<-15438 Statuses=0009 0009 04:21:54 Msec=2250 True Az=99.57 Ze=-51.57 Az status=0009 Ze status=0009 04:21:54 Check angles 04:21:54 SkyScan query 04:21:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 04:21:55 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 04:21:55 Check angles 04:21:55 SkyScan query 04:21:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:21:55 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:21:55 Message to Master queued w/err=0: serial=52920 error=0 04:22:00 Received message from Master: op=Filter serial=52921 04:22:00 Color wheel filter change from 0 to 0 04:22:00 FLIGetFilterPos err=0 currentPosition=0 04:22:00 FLIGetStepsRemaining err=0 RemainingSteps=0 04:22:00 Filter is already there-color wheel unchanged 04:22:01 Received message from Master: op=Shutter serial=52922 04:22:01 Shutter LASER close 04:22:01 Received message from Camera: op=State serial=52924 04:22:01 GetSingleValue result=40 Value=cccccccc 04:22:01 SkyScan query 04:22:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:22:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:02 Parameters OK 04:22:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:02 Set A/D data flow result=40 04:22:02 Set A/D channel type result=40 04:22:02 Set A/D encoding result=40 04:22:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:02 Set channel filter=0.000000e+000 result=40 04:22:02 Config A/D Result=40 04:22:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:02 Get A/D filter: -9.255963e+061 result=40 04:22:02 Get A/D value=-858993460 result=40 04:22:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:02 Parameters OK 04:22:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:02 Set A/D data flow result=40 04:22:02 Set A/D channel type result=40 04:22:02 Set A/D encoding result=40 04:22:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:02 Set channel filter=0.000000e+000 result=40 04:22:02 Config A/D Result=40 04:22:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:02 Get A/D filter: -9.255963e+061 result=40 04:22:02 Get A/D value=-858993460 result=40 04:22:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:22:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:22:02 Aux= 04:22:02 Message to Camera, serial 52924 queued 04:22:38 Received message from Master: op=PointingHead serial=52936 04:22:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:22:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:22:38 Point started: ret=0 04:22:38 point_skyscan result=0 04:22:39 Check angles 04:22:39 SkyScan query 04:22:39 SkyScan query done: ret=0 az=108.945<-7263 ze=-80.985<-17399 Statuses=0009 0009 04:22:39 Msec=0 True Az=108.945 Ze=-80.985 Az status=0009 Ze status=0009 04:22:40 Check angles 04:22:40 SkyScan query 04:22:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.955<-18797 Statuses=0008 0009 04:22:40 Msec=750 True Az=112.995 Ze=-101.955 Az status=0008 Ze status=0009 04:22:40 Check angles 04:22:40 SkyScan query 04:22:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.525<-20235 Statuses=0008 0009 04:22:41 Msec=1500 True Az=112.995 Ze=-123.525 Az status=0008 Ze status=0009 04:22:41 Check angles 04:22:41 SkyScan query 04:22:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.75<-21650 Statuses=0008 0009 04:22:42 Msec=2250 True Az=112.995 Ze=-144.75 Az status=0008 Ze status=0009 04:22:42 Check angles 04:22:42 SkyScan query 04:22:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.66<-23044 Statuses=0008 0009 04:22:43 Msec=3000 True Az=112.995 Ze=-165.66 Az status=0008 Ze status=0009 04:22:43 Check angles 04:22:43 SkyScan query 04:22:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:22:43 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:22:43 Message to Master queued w/err=0: serial=52936 error=0 04:22:48 Received message from Master: op=Filter serial=52937 04:22:48 Color wheel filter change from 0 to 0 04:22:48 FLIGetFilterPos err=0 currentPosition=0 04:22:48 FLIGetStepsRemaining err=0 RemainingSteps=0 04:22:48 Filter is already there-color wheel unchanged 04:22:49 Received message from Master: op=Shutter serial=52938 04:22:49 Shutter LASER open 04:22:49 Received message from Camera: op=State serial=52940 04:22:49 GetSingleValue result=40 Value=cccccccc 04:22:49 SkyScan query 04:22:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:22:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:50 Parameters OK 04:22:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:50 Set A/D data flow result=40 04:22:50 Set A/D channel type result=40 04:22:50 Set A/D encoding result=40 04:22:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:50 Set channel filter=0.000000e+000 result=40 04:22:50 Config A/D Result=40 04:22:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:50 Get A/D filter: -9.255963e+061 result=40 04:22:50 Get A/D value=-858993460 result=40 04:22:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:50 Parameters OK 04:22:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:50 Set A/D data flow result=40 04:22:50 Set A/D channel type result=40 04:22:50 Set A/D encoding result=40 04:22:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:50 Set channel filter=0.000000e+000 result=40 04:22:50 Config A/D Result=40 04:22:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:50 Get A/D filter: -9.255963e+061 result=40 04:22:50 Get A/D value=-858993460 result=40 04:22:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:22:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:22:50 Aux= 04:22:50 Message to Camera, serial 52940 queued 04:22:57 Received message from Master: op=Shutter serial=52949 04:22:57 Shutter LASER close 04:22:59 Received message from Master: op=PointingHead serial=52953 04:22:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:22:59 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:22:59 Point started: ret=0 04:22:59 point_skyscan result=0 04:23:00 Check angles 04:23:00 SkyScan query 04:23:00 SkyScan query done: ret=0 az=88.515<-5901 ze=156.165<-1589 Statuses=0009 0009 04:23:00 Msec=0 True Az=88.515 Ze=156.165 Az status=0009 Ze status=0009 04:23:01 Check angles 04:23:01 SkyScan query 04:23:01 SkyScan query done: ret=0 az=70.77<-4718 ze=134.91<-3006 Statuses=0009 0009 04:23:01 Msec=750 True Az=70.77 Ze=134.91 Az status=0009 Ze status=0009 04:23:01 Check angles 04:23:01 SkyScan query 04:23:02 SkyScan query done: ret=0 az=52.89<-3526 ze=113.46<-4436 Statuses=0009 0009 04:23:02 Msec=1500 True Az=52.89 Ze=113.46 Az status=0009 Ze status=0009 04:23:02 Check angles 04:23:02 SkyScan query 04:23:03 SkyScan query done: ret=0 az=41.025<-2735 ze=92.835<-5811 Statuses=0008 0009 04:23:03 Msec=2250 True Az=41.025 Ze=92.835 Az status=0008 Ze status=0009 04:23:03 Check angles 04:23:03 SkyScan query 04:23:04 SkyScan query done: ret=0 az=40.995<-2733 ze=71.1<-7260 Statuses=0008 0009 04:23:04 Msec=3000 True Az=40.995 Ze=71.1 Az status=0008 Ze status=0009 04:23:04 Check angles 04:23:04 SkyScan query 04:23:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.705<-8553 Statuses=0008 0009 04:23:04 Msec=3750 True Az=40.995 Ze=51.705 Az status=0008 Ze status=0009 04:23:04 Check angles 04:23:04 SkyScan query 04:23:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:23:05 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:23:05 Message to Master queued w/err=0: serial=52953 error=0 04:23:10 Received message from Master: op=Filter serial=52954 04:23:10 Color wheel filter change from 0 to 0 04:23:10 FLIGetFilterPos err=0 currentPosition=0 04:23:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:23:10 Filter is already there-color wheel unchanged 04:23:10 Received message from Master: op=Shutter serial=52955 04:23:10 Shutter LASER close 04:23:10 Received message from Camera: op=State serial=52957 04:23:10 GetSingleValue result=40 Value=cccccccc 04:23:10 SkyScan query 04:23:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:23:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:11 Parameters OK 04:23:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:11 Set A/D data flow result=40 04:23:11 Set A/D channel type result=40 04:23:11 Set A/D encoding result=40 04:23:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:11 Set channel filter=0.000000e+000 result=40 04:23:11 Config A/D Result=40 04:23:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:11 Get A/D filter: -9.255963e+061 result=40 04:23:11 Get A/D value=-858993460 result=40 04:23:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:11 Parameters OK 04:23:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:11 Set A/D data flow result=40 04:23:11 Set A/D channel type result=40 04:23:11 Set A/D encoding result=40 04:23:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:11 Set channel filter=0.000000e+000 result=40 04:23:11 Config A/D Result=40 04:23:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:11 Get A/D filter: -9.255963e+061 result=40 04:23:11 Get A/D value=-858993460 result=40 04:23:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:23:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:23:11 Aux= 04:23:11 Message to Camera, serial 52957 queued 04:23:48 Received message from Master: op=PointingHead serial=52970 04:23:48 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:23:48 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:23:48 Point started: ret=0 04:23:48 point_skyscan result=0 04:23:49 Check angles 04:23:49 SkyScan query 04:23:49 SkyScan query done: ret=0 az=63.885<-4259 ze=66.555<-7563 Statuses=0009 0008 04:23:49 Msec=0 True Az=63.885 Ze=66.555 Az status=0009 Ze status=0008 04:23:50 Check angles 04:23:50 SkyScan query 04:23:50 SkyScan query done: ret=0 az=81.21<-5414 ze=66.495<-7567 Statuses=0009 0008 04:23:50 Msec=750 True Az=81.21 Ze=66.495 Az status=0009 Ze status=0008 04:23:50 Check angles 04:23:50 SkyScan query 04:23:51 SkyScan query done: ret=0 az=98.79<-6586 ze=66.495<-7567 Statuses=0009 0008 04:23:51 Msec=1500 True Az=98.79 Ze=66.495 Az status=0009 Ze status=0008 04:23:51 Check angles 04:23:51 SkyScan query 04:23:52 SkyScan query done: ret=0 az=116.37<-7758 ze=66.495<-7567 Statuses=0009 0008 04:23:52 Msec=2250 True Az=116.37 Ze=66.495 Az status=0009 Ze status=0008 04:23:52 Check angles 04:23:52 SkyScan query 04:23:52 SkyScan query done: ret=0 az=133.83<-8922 ze=66.495<-7567 Statuses=0009 0008 04:23:52 Msec=3000 True Az=133.83 Ze=66.495 Az status=0009 Ze status=0008 04:23:53 Check angles 04:23:53 SkyScan query 04:23:53 SkyScan query done: ret=0 az=151.2<-10080 ze=66.495<-7567 Statuses=0009 0008 04:23:53 Msec=3750 True Az=151.2 Ze=66.495 Az status=0009 Ze status=0008 04:23:53 Check angles 04:23:53 SkyScan query 04:23:54 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 04:23:54 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 04:23:54 Message to Master queued w/err=0: serial=52970 error=0 04:23:59 Received message from Master: op=Filter serial=52971 04:23:59 Color wheel filter change from 0 to 0 04:23:59 FLIGetFilterPos err=0 currentPosition=0 04:23:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:23:59 Filter is already there-color wheel unchanged 04:23:59 Received message from Master: op=Shutter serial=52972 04:23:59 Shutter LASER close 04:23:59 Received message from Camera: op=State serial=52974 04:23:59 GetSingleValue result=40 Value=cccccccc 04:23:59 SkyScan query 04:24:00 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:24:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:00 Parameters OK 04:24:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:00 Set A/D data flow result=40 04:24:00 Set A/D channel type result=40 04:24:00 Set A/D encoding result=40 04:24:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:00 Set channel filter=0.000000e+000 result=40 04:24:00 Config A/D Result=40 04:24:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:00 Get A/D filter: -9.255963e+061 result=40 04:24:00 Get A/D value=-858993460 result=40 04:24:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:00 Parameters OK 04:24:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:00 Set A/D data flow result=40 04:24:00 Set A/D channel type result=40 04:24:00 Set A/D encoding result=40 04:24:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:00 Set channel filter=0.000000e+000 result=40 04:24:00 Config A/D Result=40 04:24:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:00 Get A/D filter: -9.255963e+061 result=40 04:24:00 Get A/D value=-858993460 result=40 04:24:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:00 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:24:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:24:00 Aux= 04:24:00 Message to Camera, serial 52974 queued 04:24:37 Received message from Master: op=PointingHead serial=52987 04:24:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:24:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:24:37 Point started: ret=0 04:24:37 point_skyscan result=0 04:24:38 Check angles 04:24:38 SkyScan query 04:24:38 SkyScan query done: ret=0 az=134.595<-8973 ze=36.375<-9575 Statuses=0009 0009 04:24:38 Msec=0 True Az=134.595 Ze=36.375 Az status=0009 Ze status=0009 04:24:38 Check angles 04:24:38 SkyScan query 04:24:39 SkyScan query done: ret=0 az=117.075<-7805 ze=15.465<-10969 Statuses=0009 0009 04:24:39 Msec=750 True Az=117.075 Ze=15.465 Az status=0009 Ze status=0009 04:24:39 Check angles 04:24:39 SkyScan query 04:24:40 SkyScan query done: ret=0 az=99.795<-6653 ze=-5.52<-12368 Statuses=0009 0009 04:24:40 Msec=1500 True Az=99.795 Ze=-5.52 Az status=0009 Ze status=0009 04:24:40 Check angles 04:24:40 SkyScan query 04:24:41 SkyScan query done: ret=0 az=82.02<-5468 ze=-26.925<-13795 Statuses=0009 0009 04:24:41 Msec=2250 True Az=82.02 Ze=-26.925 Az status=0009 Ze status=0009 04:24:41 Check angles 04:24:41 SkyScan query 04:24:41 SkyScan query done: ret=0 az=64.44<-4296 ze=-38.565<-14571 Statuses=0009 0008 04:24:41 Msec=3000 True Az=64.44 Ze=-38.565 Az status=0009 Ze status=0008 04:24:41 Check angles 04:24:41 SkyScan query 04:24:42 SkyScan query done: ret=0 az=47.07<-3138 ze=-38.535<-14569 Statuses=0009 0008 04:24:42 Msec=3750 True Az=47.07 Ze=-38.535 Az status=0009 Ze status=0008 04:24:42 Check angles 04:24:42 SkyScan query 04:24:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:24:43 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:24:43 Message to Master queued w/err=0: serial=52987 error=0 04:24:48 Received message from Master: op=Filter serial=52988 04:24:48 Color wheel filter change from 0 to 0 04:24:48 FLIGetFilterPos err=0 currentPosition=0 04:24:48 FLIGetStepsRemaining err=0 RemainingSteps=0 04:24:48 Filter is already there-color wheel unchanged 04:24:48 Received message from Master: op=Shutter serial=52989 04:24:48 Shutter LASER close 04:24:48 Received message from Camera: op=State serial=52991 04:24:48 GetSingleValue result=40 Value=cccccccc 04:24:48 SkyScan query 04:24:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:24:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:49 Parameters OK 04:24:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:49 Set A/D data flow result=40 04:24:49 Set A/D channel type result=40 04:24:49 Set A/D encoding result=40 04:24:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:49 Set channel filter=0.000000e+000 result=40 04:24:49 Config A/D Result=40 04:24:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:49 Get A/D filter: -9.255963e+061 result=40 04:24:49 Get A/D value=-858993460 result=40 04:24:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:49 Parameters OK 04:24:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:49 Set A/D data flow result=40 04:24:49 Set A/D channel type result=40 04:24:49 Set A/D encoding result=40 04:24:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:49 Set channel filter=0.000000e+000 result=40 04:24:49 Config A/D Result=40 04:24:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:49 Get A/D filter: -9.255963e+061 result=40 04:24:49 Get A/D value=-858993460 result=40 04:24:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:24:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:24:49 Aux= 04:24:49 Message to Camera, serial 52991 queued 04:25:25 Received message from Master: op=PointingHead serial=53004 04:25:25 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:25:25 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:25:26 Point started: ret=0 04:25:26 point_skyscan result=0 04:25:27 Check angles 04:25:27 SkyScan query 04:25:27 SkyScan query done: ret=0 az=64.47<-4298 ze=-68.805<-16587 Statuses=0009 0009 04:25:27 Msec=0 True Az=64.47 Ze=-68.805 Az status=0009 Ze status=0009 04:25:27 Check angles 04:25:27 SkyScan query 04:25:28 SkyScan query done: ret=0 az=82.23<-5482 ze=-90.18<-18012 Statuses=0009 0009 04:25:28 Msec=750 True Az=82.23 Ze=-90.18 Az status=0009 Ze status=0009 04:25:28 Check angles 04:25:28 SkyScan query 04:25:29 SkyScan query done: ret=0 az=100.275<-6685 ze=-111.57<-19438 Statuses=0009 0009 04:25:29 Msec=1500 True Az=100.275 Ze=-111.57 Az status=0009 Ze status=0009 04:25:29 Check angles 04:25:29 SkyScan query 04:25:29 SkyScan query done: ret=0 az=117.555<-7837 ze=-132.57<-20838 Statuses=0009 0009 04:25:29 Msec=2250 True Az=117.555 Ze=-132.57 Az status=0009 Ze status=0009 04:25:30 Check angles 04:25:30 SkyScan query 04:25:30 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 04:25:30 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 04:25:30 Check angles 04:25:30 SkyScan query 04:25:31 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 04:25:31 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 04:25:31 Message to Master queued w/err=0: serial=53004 error=0 04:25:36 Received message from Master: op=Filter serial=53005 04:25:36 Color wheel filter change from 0 to 0 04:25:36 FLIGetFilterPos err=0 currentPosition=0 04:25:36 FLIGetStepsRemaining err=0 RemainingSteps=0 04:25:36 Filter is already there-color wheel unchanged 04:25:36 Received message from Master: op=Shutter serial=53006 04:25:36 Shutter LASER close 04:25:36 Received message from Camera: op=State serial=53008 04:25:36 GetSingleValue result=40 Value=cccccccc 04:25:36 SkyScan query 04:25:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:25:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:37 Parameters OK 04:25:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:37 Set A/D data flow result=40 04:25:37 Set A/D channel type result=40 04:25:37 Set A/D encoding result=40 04:25:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:37 Set channel filter=0.000000e+000 result=40 04:25:37 Config A/D Result=40 04:25:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:37 Get A/D filter: -9.255963e+061 result=40 04:25:37 Get A/D value=-858993460 result=40 04:25:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:37 Parameters OK 04:25:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:37 Set A/D data flow result=40 04:25:37 Set A/D channel type result=40 04:25:37 Set A/D encoding result=40 04:25:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:37 Set channel filter=0.000000e+000 result=40 04:25:37 Config A/D Result=40 04:25:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:37 Get A/D filter: -9.255963e+061 result=40 04:25:37 Get A/D value=-858993460 result=40 04:25:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:37 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:25:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:25:37 Aux= 04:25:37 Message to Camera, serial 53008 queued 04:26:14 Received message from Master: op=PointingHead serial=53021 04:26:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:26:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:26:14 Point started: ret=0 04:26:14 point_skyscan result=0 04:26:15 Check angles 04:26:15 SkyScan query 04:26:15 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.105<-23407 Statuses=0009 0009 04:26:15 Msec=0 True Az=113.01 Ze=-171.105 Az status=0009 Ze status=0009 04:26:15 Check angles 04:26:15 SkyScan query 04:26:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:26:16 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:26:16 Message to Master queued w/err=0: serial=53021 error=0 04:26:21 Received message from Master: op=Filter serial=53022 04:26:21 Color wheel filter change from 0 to 0 04:26:21 FLIGetFilterPos err=0 currentPosition=0 04:26:21 FLIGetStepsRemaining err=0 RemainingSteps=0 [UTC 2018-12-11 04:26:21] 04:26:21 Filter is already there-color wheel unchanged 04:26:21 Received message from Master: op=Shutter serial=53023 04:26:21 Shutter LASER open 04:26:21 Received message from Camera: op=State serial=53025 04:26:21 GetSingleValue result=40 Value=cccccccc 04:26:21 SkyScan query 04:26:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:26:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:22 Parameters OK 04:26:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:22 Set A/D data flow result=40 04:26:22 Set A/D channel type result=40 04:26:22 Set A/D encoding result=40 04:26:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:22 Set channel filter=0.000000e+000 result=40 04:26:22 Config A/D Result=40 04:26:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:22 Get A/D filter: -9.255963e+061 result=40 04:26:22 Get A/D value=-858993460 result=40 04:26:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:22 Parameters OK 04:26:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:22 Set A/D data flow result=40 04:26:22 Set A/D channel type result=40 04:26:22 Set A/D encoding result=40 04:26:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:22 Set channel filter=0.000000e+000 result=40 04:26:22 Config A/D Result=40 04:26:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:22 Get A/D filter: -9.255963e+061 result=40 04:26:22 Get A/D value=-858993460 result=40 04:26:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:26:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:26:22 Aux= 04:26:22 Message to Camera, serial 53025 queued 04:26:30 Received message from Master: op=Shutter serial=53035 04:26:30 Shutter LASER close 04:26:31 Received message from Master: op=PointingHead serial=53039 04:26:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:26:31 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:26:31 Point started: ret=0 04:26:31 point_skyscan result=0 04:26:32 Check angles 04:26:32 SkyScan query 04:26:33 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.235<-21549 Statuses=0009 0009 04:26:33 Msec=0 True Az=135.945 Ze=-143.235 Az status=0009 Ze status=0009 04:26:33 Check angles 04:26:33 SkyScan query 04:26:33 SkyScan query done: ret=0 az=153.42<-10228 ze=-122.28<-20152 Statuses=0009 0009 04:26:33 Msec=750 True Az=153.42 Ze=-122.28 Az status=0009 Ze status=0009 04:26:34 Check angles 04:26:34 SkyScan query 04:26:34 SkyScan query done: ret=0 az=170.985<-11399 ze=-101.385<-18759 Statuses=0009 0009 04:26:34 Msec=1500 True Az=170.985 Ze=-101.385 Az status=0009 Ze status=0009 04:26:34 Check angles 04:26:34 SkyScan query 04:26:35 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.37<-17358 Statuses=0008 0009 04:26:35 Msec=2250 True Az=176.025 Ze=-80.37 Az status=0008 Ze status=0009 04:26:35 Check angles 04:26:35 SkyScan query 04:26:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.415<-15961 Statuses=0008 0009 04:26:36 Msec=3000 True Az=175.995 Ze=-59.415 Az status=0008 Ze status=0009 04:26:36 Check angles 04:26:36 SkyScan query 04:26:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:26:36 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:26:36 Message to Master queued w/err=0: serial=53039 error=0 04:26:41 Received message from Master: op=Filter serial=53040 04:26:41 Color wheel filter change from 0 to 0 04:26:41 FLIGetFilterPos err=0 currentPosition=0 04:26:41 FLIGetStepsRemaining err=0 RemainingSteps=0 04:26:41 Filter is already there-color wheel unchanged 04:26:42 Received message from Master: op=Shutter serial=53041 04:26:42 Shutter LASER close 04:26:42 Received message from Camera: op=State serial=53043 04:26:42 GetSingleValue result=40 Value=cccccccc 04:26:42 SkyScan query 04:26:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:26:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:42 Parameters OK 04:26:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:42 Set A/D data flow result=40 04:26:42 Set A/D channel type result=40 04:26:42 Set A/D encoding result=40 04:26:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:42 Set channel filter=0.000000e+000 result=40 04:26:42 Config A/D Result=40 04:26:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:42 Get A/D filter: -9.255963e+061 result=40 04:26:42 Get A/D value=-858993460 result=40 04:26:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:42 Parameters OK 04:26:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:42 Set A/D data flow result=40 04:26:42 Set A/D channel type result=40 04:26:42 Set A/D encoding result=40 04:26:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:42 Set channel filter=0.000000e+000 result=40 04:26:42 Config A/D Result=40 04:26:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:42 Get A/D filter: -9.255963e+061 result=40 04:26:42 Get A/D value=-858993460 result=40 04:26:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:26:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:26:42 Aux= 04:26:42 Message to Camera, serial 53043 queued 04:27:19 Received message from Master: op=PointingHead serial=53056 04:27:19 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:27:19 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:27:20 Point started: ret=0 04:27:20 point_skyscan result=0 04:27:20 Check angles 04:27:20 SkyScan query 04:27:21 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.675<-13445 Statuses=0009 0009 04:27:21 Msec=0 True Az=152.985 Ze=-21.675 Az status=0009 Ze status=0009 04:27:21 Check angles 04:27:21 SkyScan query 04:27:22 SkyScan query done: ret=0 az=135.495<-9033 ze=-0.69<-12046 Statuses=0009 0009 04:27:22 Msec=750 True Az=135.495 Ze=-0.69 Az status=0009 Ze status=0009 04:27:22 Check angles 04:27:22 SkyScan query 04:27:22 SkyScan query done: ret=0 az=117.93<-7862 ze=20.25<-10650 Statuses=0009 0009 04:27:22 Msec=1500 True Az=117.93 Ze=20.25 Az status=0009 Ze status=0009 04:27:23 Check angles 04:27:23 SkyScan query 04:27:23 SkyScan query done: ret=0 az=100.455<-6697 ze=41.235<-9251 Statuses=0009 0009 04:27:23 Msec=2250 True Az=100.455 Ze=41.235 Az status=0009 Ze status=0009 04:27:23 Check angles 04:27:23 SkyScan query 04:27:24 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 04:27:24 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 04:27:24 Check angles 04:27:24 SkyScan query 04:27:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:27:25 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:27:25 Message to Master queued w/err=0: serial=53056 error=0 04:27:30 Received message from Master: op=Filter serial=53057 04:27:30 Color wheel filter change from 0 to 0 04:27:30 FLIGetFilterPos err=0 currentPosition=0 04:27:30 FLIGetStepsRemaining err=0 RemainingSteps=0 04:27:30 Filter is already there-color wheel unchanged 04:27:30 Received message from Master: op=Shutter serial=53058 04:27:30 Shutter LASER close 04:27:30 Received message from Camera: op=State serial=53060 04:27:30 GetSingleValue result=40 Value=cccccccc 04:27:30 SkyScan query 04:27:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:27:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:30 Parameters OK 04:27:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:30 Set A/D data flow result=40 04:27:30 Set A/D channel type result=40 04:27:30 Set A/D encoding result=40 04:27:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:30 Set channel filter=0.000000e+000 result=40 04:27:30 Config A/D Result=40 04:27:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:30 Get A/D filter: -9.255963e+061 result=40 04:27:30 Get A/D value=-858993460 result=40 04:27:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:30 Parameters OK 04:27:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:30 Set A/D data flow result=40 04:27:30 Set A/D channel type result=40 04:27:30 Set A/D encoding result=40 04:27:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:30 Set channel filter=0.000000e+000 result=40 04:27:30 Config A/D Result=40 04:27:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:30 Get A/D filter: -9.255963e+061 result=40 04:27:30 Get A/D value=-858993460 result=40 04:27:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:27:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:27:30 Aux= 04:27:30 Message to Camera, serial 53060 queued 04:28:07 Received message from Master: op=PointingHead serial=53073 04:28:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:28:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:28:08 Point started: ret=0 04:28:08 point_skyscan result=0 04:28:08 Check angles 04:28:08 SkyScan query 04:28:09 SkyScan query done: ret=0 az=109.215<-7281 ze=38.49<-9434 Statuses=0009 0008 04:28:09 Msec=0 True Az=109.215 Ze=38.49 Az status=0009 Ze status=0008 04:28:09 Check angles 04:28:09 SkyScan query 04:28:10 SkyScan query done: ret=0 az=127.05<-8470 ze=38.505<-9433 Statuses=0009 0008 04:28:10 Msec=750 True Az=127.05 Ze=38.505 Az status=0009 Ze status=0008 04:28:10 Check angles 04:28:10 SkyScan query 04:28:11 SkyScan query done: ret=0 az=144.795<-9653 ze=38.505<-9433 Statuses=0009 0008 04:28:11 Msec=1500 True Az=144.795 Ze=38.505 Az status=0009 Ze status=0008 04:28:11 Check angles 04:28:11 SkyScan query 04:28:11 SkyScan query done: ret=0 az=162.27<-10818 ze=38.505<-9433 Statuses=0009 0008 04:28:11 Msec=2250 True Az=162.27 Ze=38.505 Az status=0009 Ze status=0008 04:28:11 Check angles 04:28:11 SkyScan query 04:28:12 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:28:12 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:28:12 Check angles 04:28:12 SkyScan query 04:28:13 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:28:13 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:28:13 Message to Master queued w/err=0: serial=53073 error=0 04:28:18 Received message from Master: op=Filter serial=53074 04:28:18 Color wheel filter change from 0 to 0 04:28:18 FLIGetFilterPos err=0 currentPosition=0 04:28:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:28:18 Filter is already there-color wheel unchanged 04:28:18 Received message from Master: op=Shutter serial=53075 04:28:18 Shutter LASER close 04:28:18 Received message from Camera: op=State serial=53077 04:28:18 GetSingleValue result=40 Value=cccccccc 04:28:18 SkyScan query 04:28:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:28:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:19 Parameters OK 04:28:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:19 Set A/D data flow result=40 04:28:19 Set A/D channel type result=40 04:28:19 Set A/D encoding result=40 04:28:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:19 Set channel filter=0.000000e+000 result=40 04:28:19 Config A/D Result=40 04:28:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:19 Get A/D filter: -9.255963e+061 result=40 04:28:19 Get A/D value=-858993460 result=40 04:28:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:19 Parameters OK 04:28:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:19 Set A/D data flow result=40 04:28:19 Set A/D channel type result=40 04:28:19 Set A/D encoding result=40 04:28:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:19 Set channel filter=0.000000e+000 result=40 04:28:19 Config A/D Result=40 04:28:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:19 Get A/D filter: -9.255963e+061 result=40 04:28:19 Get A/D value=-858993460 result=40 04:28:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:28:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:28:19 Aux= 04:28:19 Message to Camera, serial 53077 queued 04:28:55 Received message from Master: op=PointingHead serial=53090 04:28:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:28:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:28:56 Point started: ret=0 04:28:56 point_skyscan result=0 04:28:57 Check angles 04:28:57 SkyScan query 04:28:57 SkyScan query done: ret=0 az=152.685<-10179 ze=8.28<-11448 Statuses=0009 0009 04:28:57 Msec=0 True Az=152.685 Ze=8.28 Az status=0009 Ze status=0009 04:28:57 Check angles 04:28:57 SkyScan query 04:28:58 SkyScan query done: ret=0 az=135.195<-9013 ze=-12.66<-12844 Statuses=0009 0009 04:28:58 Msec=750 True Az=135.195 Ze=-12.66 Az status=0009 Ze status=0009 04:28:58 Check angles 04:28:58 SkyScan query 04:28:59 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.615<-14241 Statuses=0009 0009 04:28:59 Msec=1500 True Az=117.57 Ze=-33.615 Az status=0009 Ze status=0009 04:28:59 Check angles 04:28:59 SkyScan query 04:28:59 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.555<-15437 Statuses=0009 0009 04:28:59 Msec=2250 True Az=100.23 Ze=-51.555 Az status=0009 Ze status=0009 04:29:00 Check angles 04:29:00 SkyScan query 04:29:00 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 04:29:00 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 04:29:00 Check angles 04:29:00 SkyScan query 04:29:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:29:01 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:29:01 Message to Master queued w/err=0: serial=53090 error=0 04:29:06 Received message from Master: op=Filter serial=53091 04:29:06 Color wheel filter change from 0 to 0 04:29:06 FLIGetFilterPos err=0 currentPosition=0 04:29:06 FLIGetStepsRemaining err=0 RemainingSteps=0 04:29:06 Filter is already there-color wheel unchanged 04:29:06 Received message from Master: op=Shutter serial=53092 04:29:06 Shutter LASER close 04:29:06 Received message from Camera: op=State serial=53094 04:29:06 GetSingleValue result=40 Value=cccccccc 04:29:06 SkyScan query 04:29:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:29:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:07 Parameters OK 04:29:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:07 Set A/D data flow result=40 04:29:07 Set A/D channel type result=40 04:29:07 Set A/D encoding result=40 04:29:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:07 Set channel filter=0.000000e+000 result=40 04:29:07 Config A/D Result=40 04:29:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:07 Get A/D filter: -9.255963e+061 result=40 04:29:07 Get A/D value=-858993460 result=40 04:29:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:07 Parameters OK 04:29:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:07 Set A/D data flow result=40 04:29:07 Set A/D channel type result=40 04:29:07 Set A/D encoding result=40 04:29:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:07 Set channel filter=0.000000e+000 result=40 04:29:07 Config A/D Result=40 04:29:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:07 Get A/D filter: -9.255963e+061 result=40 04:29:07 Get A/D value=-858993460 result=40 04:29:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:29:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:29:07 Aux= 04:29:07 Message to Camera, serial 53094 queued 04:29:43 Received message from Master: op=PointingHead serial=53107 04:29:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:29:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:29:44 Point started: ret=0 04:29:44 point_skyscan result=0 04:29:45 Check angles 04:29:45 SkyScan query 04:29:45 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.225<-17415 Statuses=0009 0009 04:29:45 Msec=0 True Az=108.975 Ze=-81.225 Az status=0009 Ze status=0009 04:29:45 Check angles 04:29:45 SkyScan query 04:29:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.18<-18812 Statuses=0008 0009 04:29:46 Msec=750 True Az=112.995 Ze=-102.18 Az status=0008 Ze status=0009 04:29:46 Check angles 04:29:46 SkyScan query 04:29:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.135<-20209 Statuses=0008 0009 04:29:47 Msec=1500 True Az=112.995 Ze=-123.135 Az status=0008 Ze status=0009 04:29:47 Check angles 04:29:47 SkyScan query 04:29:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.12<-21608 Statuses=0008 0009 04:29:47 Msec=2250 True Az=112.995 Ze=-144.12 Az status=0008 Ze status=0009 04:29:48 Check angles 04:29:48 SkyScan query 04:29:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.045<-23003 Statuses=0008 0009 04:29:48 Msec=3000 True Az=112.995 Ze=-165.045 Az status=0008 Ze status=0009 04:29:48 Check angles 04:29:48 SkyScan query 04:29:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:29:49 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:29:49 Message to Master queued w/err=0: serial=53107 error=0 04:29:54 Received message from Master: op=Filter serial=53108 04:29:54 Color wheel filter change from 0 to 0 04:29:54 FLIGetFilterPos err=0 currentPosition=0 04:29:54 FLIGetStepsRemaining err=0 RemainingSteps=0 04:29:54 Filter is already there-color wheel unchanged 04:29:54 Received message from Master: op=Shutter serial=53109 04:29:54 Shutter LASER open 04:29:54 Received message from Camera: op=State serial=53111 04:29:54 GetSingleValue result=40 Value=cccccccc 04:29:54 SkyScan query 04:29:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:29:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:55 Parameters OK 04:29:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:55 Set A/D data flow result=40 04:29:55 Set A/D channel type result=40 04:29:55 Set A/D encoding result=40 04:29:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:55 Set channel filter=0.000000e+000 result=40 04:29:55 Config A/D Result=40 04:29:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:55 Get A/D filter: -9.255963e+061 result=40 04:29:55 Get A/D value=-858993460 result=40 04:29:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:55 Parameters OK 04:29:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:55 Set A/D data flow result=40 04:29:55 Set A/D channel type result=40 04:29:55 Set A/D encoding result=40 04:29:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:55 Set channel filter=0.000000e+000 result=40 04:29:55 Config A/D Result=40 04:29:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:55 Get A/D filter: -9.255963e+061 result=40 04:29:55 Get A/D value=-858993460 result=40 04:29:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:29:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:29:55 Aux= 04:29:55 Message to Camera, serial 53111 queued 04:30:03 Received message from Master: op=Shutter serial=53121 04:30:03 Shutter LASER close 04:30:04 Received message from Master: op=PointingHead serial=53125 04:30:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:30:04 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:30:04 Point started: ret=0 04:30:04 point_skyscan result=0 04:30:05 Check angles 04:30:05 SkyScan query 04:30:05 SkyScan query done: ret=0 az=90.18<-6012 ze=157.575<-1495 Statuses=0009 0009 04:30:05 Msec=0 True Az=90.18 Ze=157.575 Az status=0009 Ze status=0009 04:30:06 Check angles 04:30:06 SkyScan query 04:30:06 SkyScan query done: ret=0 az=72.75<-4850 ze=136.59<-2894 Statuses=0009 0009 04:30:06 Msec=750 True Az=72.75 Ze=136.59 Az status=0009 Ze status=0009 04:30:06 Check angles 04:30:06 SkyScan query 04:30:07 SkyScan query done: ret=0 az=55.215<-3681 ze=115.65<-4290 Statuses=0009 0009 04:30:07 Msec=1500 True Az=55.215 Ze=115.65 Az status=0009 Ze status=0009 04:30:07 Check angles 04:30:07 SkyScan query 04:30:08 SkyScan query done: ret=0 az=40.875<-2725 ze=94.695<-5687 Statuses=0009 0009 04:30:08 Msec=2250 True Az=40.875 Ze=94.695 Az status=0009 Ze status=0009 04:30:08 Check angles 04:30:08 SkyScan query 04:30:08 SkyScan query done: ret=0 az=40.995<-2733 ze=73.755<-7083 Statuses=0008 0009 04:30:08 Msec=3000 True Az=40.995 Ze=73.755 Az status=0008 Ze status=0009 04:30:09 Check angles 04:30:09 SkyScan query 04:30:09 SkyScan query done: ret=0 az=40.995<-2733 ze=53.055<-8463 Statuses=0008 0009 04:30:09 Msec=3750 True Az=40.995 Ze=53.055 Az status=0008 Ze status=0009 04:30:09 Check angles 04:30:09 SkyScan query 04:30:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:30:10 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:30:10 Message to Master queued w/err=0: serial=53125 error=0 04:30:15 Received message from Master: op=Filter serial=53126 04:30:15 Color wheel filter change from 0 to 0 04:30:15 FLIGetFilterPos err=0 currentPosition=0 04:30:15 FLIGetStepsRemaining err=0 RemainingSteps=0 04:30:15 Filter is already there-color wheel unchanged 04:30:15 Received message from Master: op=Shutter serial=53127 04:30:15 Shutter LASER close 04:30:15 Received message from Camera: op=State serial=53129 04:30:15 GetSingleValue result=40 Value=cccccccc 04:30:15 SkyScan query 04:30:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:30:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:16 Parameters OK 04:30:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:16 Set A/D data flow result=40 04:30:16 Set A/D channel type result=40 04:30:16 Set A/D encoding result=40 04:30:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:16 Set channel filter=0.000000e+000 result=40 04:30:16 Config A/D Result=40 04:30:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:16 Get A/D filter: -9.255963e+061 result=40 04:30:16 Get A/D value=-858993460 result=40 04:30:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:16 Parameters OK 04:30:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:16 Set A/D data flow result=40 04:30:16 Set A/D channel type result=40 04:30:16 Set A/D encoding result=40 04:30:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:16 Set channel filter=0.000000e+000 result=40 04:30:16 Config A/D Result=40 04:30:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:16 Get A/D filter: -9.255963e+061 result=40 04:30:16 Get A/D value=-858993460 result=40 04:30:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:30:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:30:16 Aux= 04:30:16 Message to Camera, serial 53129 queued 04:30:52 Received message from Master: op=PointingHead serial=53141 04:30:52 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:30:52 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:30:52 Point started: ret=0 04:30:52 point_skyscan result=0 04:30:53 Check angles 04:30:53 SkyScan query 04:30:53 SkyScan query done: ret=0 az=64.23<-4282 ze=66.555<-7563 Statuses=0009 0008 04:30:53 Msec=0 True Az=64.23 Ze=66.555 Az status=0009 Ze status=0008 04:30:54 Check angles 04:30:54 SkyScan query 04:30:54 SkyScan query done: ret=0 az=81.525<-5435 ze=66.51<-7566 Statuses=0009 0008 04:30:54 Msec=750 True Az=81.525 Ze=66.51 Az status=0009 Ze status=0008 04:30:54 Check angles 04:30:54 SkyScan query 04:30:55 SkyScan query done: ret=0 az=99.105<-6607 ze=66.495<-7567 Statuses=0009 0008 04:30:55 Msec=1500 True Az=99.105 Ze=66.495 Az status=0009 Ze status=0008 04:30:55 Check angles 04:30:55 SkyScan query 04:30:56 SkyScan query done: ret=0 az=117<-7800 ze=66.495<-7567 Statuses=0009 0008 04:30:56 Msec=2250 True Az=117 Ze=66.495 Az status=0009 Ze status=0008 04:30:56 Check angles 04:30:56 SkyScan query 04:30:56 SkyScan query done: ret=0 az=134.475<-8965 ze=66.495<-7567 Statuses=0009 0008 04:30:56 Msec=3000 True Az=134.475 Ze=66.495 Az status=0009 Ze status=0008 04:30:57 Check angles 04:30:57 SkyScan query 04:30:57 SkyScan query done: ret=0 az=151.905<-10127 ze=66.495<-7567 Statuses=0009 0008 04:30:57 Msec=3750 True Az=151.905 Ze=66.495 Az status=0009 Ze status=0008 04:30:57 Check angles 04:30:57 SkyScan query 04:30:58 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:30:58 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 04:30:58 Message to Master queued w/err=0: serial=53141 error=0 04:31:03 Received message from Master: op=Filter serial=53142 04:31:03 Color wheel filter change from 0 to 0 04:31:03 FLIGetFilterPos err=0 currentPosition=0 04:31:03 FLIGetStepsRemaining err=0 RemainingSteps=0 04:31:03 Filter is already there-color wheel unchanged 04:31:03 Received message from Master: op=Shutter serial=53143 04:31:03 Shutter LASER close 04:31:03 Received message from Camera: op=State serial=53145 04:31:03 GetSingleValue result=40 Value=cccccccc 04:31:03 SkyScan query 04:31:04 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:31:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:04 Parameters OK 04:31:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:04 Set A/D data flow result=40 04:31:04 Set A/D channel type result=40 04:31:04 Set A/D encoding result=40 04:31:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:04 Set channel filter=0.000000e+000 result=40 04:31:04 Config A/D Result=40 04:31:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:04 Get A/D filter: -9.255963e+061 result=40 04:31:04 Get A/D value=-858993460 result=40 04:31:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:04 Parameters OK 04:31:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:04 Set A/D data flow result=40 04:31:04 Set A/D channel type result=40 04:31:04 Set A/D encoding result=40 04:31:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:04 Set channel filter=0.000000e+000 result=40 04:31:04 Config A/D Result=40 04:31:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:04 Get A/D filter: -9.255963e+061 result=40 04:31:04 Get A/D value=-858993460 result=40 04:31:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:04 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:31:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:31:04 Aux= 04:31:04 Message to Camera, serial 53145 queued 04:31:40 Received message from Master: op=PointingHead serial=53158 04:31:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:31:41 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:31:41 Point started: ret=0 04:31:41 point_skyscan result=0 04:31:42 Check angles 04:31:42 SkyScan query 04:31:42 SkyScan query done: ret=0 az=134.82<-8988 ze=36.6<-9560 Statuses=0009 0009 04:31:42 Msec=0 True Az=134.82 Ze=36.6 Az status=0009 Ze status=0009 04:31:42 Check angles 04:31:42 SkyScan query 04:31:43 SkyScan query done: ret=0 az=117.06<-7804 ze=15.255<-10983 Statuses=0009 0009 04:31:43 Msec=750 True Az=117.06 Ze=15.255 Az status=0009 Ze status=0009 04:31:43 Check angles 04:31:43 SkyScan query 04:31:44 SkyScan query done: ret=0 az=99.24<-6616 ze=-6.165<-12411 Statuses=0009 0009 04:31:44 Msec=1500 True Az=99.24 Ze=-6.165 Az status=0009 Ze status=0009 04:31:44 Check angles 04:31:44 SkyScan query 04:31:44 SkyScan query done: ret=0 az=81.75<-5450 ze=-27.15<-13810 Statuses=0009 0009 04:31:44 Msec=2250 True Az=81.75 Ze=-27.15 Az status=0009 Ze status=0009 04:31:45 Check angles 04:31:45 SkyScan query 04:31:45 SkyScan query done: ret=0 az=64.335<-4289 ze=-38.565<-14571 Statuses=0009 0008 04:31:45 Msec=3000 True Az=64.335 Ze=-38.565 Az status=0009 Ze status=0008 04:31:45 Check angles 04:31:45 SkyScan query 04:31:46 SkyScan query done: ret=0 az=46.875<-3125 ze=-38.535<-14569 Statuses=0009 0008 04:31:46 Msec=3750 True Az=46.875 Ze=-38.535 Az status=0009 Ze status=0008 04:31:46 Check angles 04:31:46 SkyScan query 04:31:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:31:47 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:31:47 Message to Master queued w/err=0: serial=53158 error=0 04:31:52 Received message from Master: op=Filter serial=53159 04:31:52 Color wheel filter change from 0 to 0 04:31:52 FLIGetFilterPos err=0 currentPosition=0 04:31:52 FLIGetStepsRemaining err=0 RemainingSteps=0 04:31:52 Filter is already there-color wheel unchanged 04:31:52 Received message from Master: op=Shutter serial=53160 04:31:52 Shutter LASER close 04:31:52 Received message from Camera: op=State serial=53162 04:31:52 GetSingleValue result=40 Value=cccccccc 04:31:52 SkyScan query 04:31:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:31:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:53 Parameters OK 04:31:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:53 Set A/D data flow result=40 04:31:53 Set A/D channel type result=40 04:31:53 Set A/D encoding result=40 04:31:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:53 Set channel filter=0.000000e+000 result=40 04:31:53 Config A/D Result=40 04:31:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:53 Get A/D filter: -9.255963e+061 result=40 04:31:53 Get A/D value=-858993460 result=40 04:31:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:53 Parameters OK 04:31:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:53 Set A/D data flow result=40 04:31:53 Set A/D channel type result=40 04:31:53 Set A/D encoding result=40 04:31:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:53 Set channel filter=0.000000e+000 result=40 04:31:53 Config A/D Result=40 04:31:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:53 Get A/D filter: -9.255963e+061 result=40 04:31:53 Get A/D value=-858993460 result=40 04:31:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:31:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:31:53 Aux= 04:31:53 Message to Camera, serial 53162 queued 04:32:29 Received message from Master: op=PointingHead serial=53175 04:32:29 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:32:29 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:32:30 Point started: ret=0 04:32:30 point_skyscan result=0 04:32:30 Check angles 04:32:30 SkyScan query 04:32:31 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.505<-16567 Statuses=0009 0009 04:32:31 Msec=0 True Az=64.215 Ze=-68.505 Az status=0009 Ze status=0009 04:32:31 Check angles 04:32:31 SkyScan query 04:32:32 SkyScan query done: ret=0 az=81.51<-5434 ze=-89.505<-17967 Statuses=0009 0009 04:32:32 Msec=750 True Az=81.51 Ze=-89.505 Az status=0009 Ze status=0009 04:32:32 Check angles 04:32:32 SkyScan query 04:32:33 SkyScan query done: ret=0 az=99.135<-6609 ze=-110.445<-19363 Statuses=0009 0009 04:32:33 Msec=1500 True Az=99.135 Ze=-110.445 Az status=0009 Ze status=0009 04:32:33 Check angles 04:32:33 SkyScan query 04:32:33 SkyScan query done: ret=0 az=116.73<-7782 ze=-131.385<-20759 Statuses=0009 0009 04:32:33 Msec=2250 True Az=116.73 Ze=-131.385 Az status=0009 Ze status=0009 04:32:33 Check angles 04:32:33 SkyScan query 04:32:34 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 04:32:34 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 04:32:34 Check angles 04:32:34 SkyScan query 04:32:35 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:32:35 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:32:35 Message to Master queued w/err=0: serial=53175 error=0 04:32:40 Received message from Master: op=Filter serial=53176 04:32:40 Color wheel filter change from 0 to 0 04:32:40 FLIGetFilterPos err=0 currentPosition=0 04:32:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:32:40 Filter is already there-color wheel unchanged 04:32:40 Received message from Master: op=Shutter serial=53177 04:32:40 Shutter LASER close 04:32:40 Received message from Camera: op=State serial=53179 04:32:40 GetSingleValue result=40 Value=cccccccc 04:32:40 SkyScan query 04:32:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:32:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:41 Parameters OK 04:32:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:41 Set A/D data flow result=40 04:32:41 Set A/D channel type result=40 04:32:41 Set A/D encoding result=40 04:32:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:41 Set channel filter=0.000000e+000 result=40 04:32:41 Config A/D Result=40 04:32:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:41 Get A/D filter: -9.255963e+061 result=40 04:32:41 Get A/D value=-858993460 result=40 04:32:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:41 Parameters OK 04:32:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:41 Set A/D data flow result=40 04:32:41 Set A/D channel type result=40 04:32:41 Set A/D encoding result=40 04:32:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:41 Set channel filter=0.000000e+000 result=40 04:32:41 Config A/D Result=40 04:32:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:41 Get A/D filter: -9.255963e+061 result=40 04:32:41 Get A/D value=-858993460 result=40 04:32:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:41 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:32:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:32:41 Aux= 04:32:41 Message to Camera, serial 53179 queued 04:33:17 Received message from Master: op=PointingHead serial=53192 04:33:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:33:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:33:18 Point started: ret=0 04:33:18 point_skyscan result=0 04:33:19 Check angles 04:33:19 SkyScan query 04:33:19 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.21<-23414 Statuses=0009 0009 04:33:19 Msec=0 True Az=113.01 Ze=-171.21 Az status=0009 Ze status=0009 04:33:19 Check angles 04:33:19 SkyScan query 04:33:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:33:20 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:33:20 Message to Master queued w/err=0: serial=53192 error=0 04:33:25 Received message from Master: op=Filter serial=53193 04:33:25 Color wheel filter change from 0 to 0 04:33:25 FLIGetFilterPos err=0 currentPosition=0 04:33:25 FLIGetStepsRemaining err=0 RemainingSteps=0 04:33:25 Filter is already there-color wheel unchanged 04:33:25 Received message from Master: op=Shutter serial=53194 04:33:25 Shutter LASER open 04:33:25 Received message from Camera: op=State serial=53196 04:33:25 GetSingleValue result=40 Value=cccccccc 04:33:25 SkyScan query 04:33:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:33:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:26 Parameters OK 04:33:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:26 Set A/D data flow result=40 04:33:26 Set A/D channel type result=40 04:33:26 Set A/D encoding result=40 04:33:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:26 Set channel filter=0.000000e+000 result=40 04:33:26 Config A/D Result=40 04:33:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:26 Get A/D filter: -9.255963e+061 result=40 04:33:26 Get A/D value=-858993460 result=40 04:33:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:26 Parameters OK 04:33:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:26 Set A/D data flow result=40 04:33:26 Set A/D channel type result=40 04:33:26 Set A/D encoding result=40 04:33:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:26 Set channel filter=0.000000e+000 result=40 04:33:26 Config A/D Result=40 04:33:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:26 Get A/D filter: -9.255963e+061 result=40 04:33:26 Get A/D value=-858993460 result=40 04:33:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:33:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:33:26 Aux= 04:33:26 Message to Camera, serial 53196 queued 04:33:34 Received message from Master: op=Shutter serial=53206 04:33:34 Shutter LASER close 04:33:35 Received message from Master: op=PointingHead serial=53210 04:33:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:33:35 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:33:35 Point started: ret=0 04:33:35 point_skyscan result=0 04:33:36 Check angles 04:33:36 SkyScan query 04:33:36 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.04<-21536 Statuses=0009 0009 04:33:36 Msec=0 True Az=136.155 Ze=-143.04 Az status=0009 Ze status=0009 04:33:37 Check angles 04:33:37 SkyScan query 04:33:37 SkyScan query done: ret=0 az=154.02<-10268 ze=-121.68<-20112 Statuses=0009 0009 04:33:37 Msec=750 True Az=154.02 Ze=-121.68 Az status=0009 Ze status=0009 04:33:37 Check angles 04:33:37 SkyScan query 04:33:38 SkyScan query done: ret=0 az=171.435<-11429 ze=-100.665<-18711 Statuses=0009 0009 04:33:38 Msec=1500 True Az=171.435 Ze=-100.665 Az status=0009 Ze status=0009 04:33:38 Check angles 04:33:38 SkyScan query 04:33:39 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.785<-17319 Statuses=0008 0009 04:33:39 Msec=2250 True Az=176.025 Ze=-79.785 Az status=0008 Ze status=0009 04:33:39 Check angles 04:33:39 SkyScan query 04:33:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.785<-15919 Statuses=0008 0009 04:33:39 Msec=3000 True Az=176.01 Ze=-58.785 Az status=0008 Ze status=0009 04:33:40 Check angles 04:33:40 SkyScan query 04:33:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:33:40 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:33:40 Message to Master queued w/err=0: serial=53210 error=0 04:33:45 Received message from Master: op=Filter serial=53211 04:33:45 Color wheel filter change from 0 to 0 04:33:45 FLIGetFilterPos err=0 currentPosition=0 04:33:45 FLIGetStepsRemaining err=0 RemainingSteps=0 04:33:45 Filter is already there-color wheel unchanged 04:33:45 Received message from Master: op=Shutter serial=53212 04:33:45 Shutter LASER close 04:33:46 Received message from Camera: op=State serial=53214 04:33:46 GetSingleValue result=40 Value=cccccccc 04:33:46 SkyScan query 04:33:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:33:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:46 Parameters OK 04:33:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:46 Set A/D data flow result=40 04:33:46 Set A/D channel type result=40 04:33:46 Set A/D encoding result=40 04:33:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:46 Set channel filter=0.000000e+000 result=40 04:33:46 Config A/D Result=40 04:33:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:46 Get A/D filter: -9.255963e+061 result=40 04:33:46 Get A/D value=-858993460 result=40 04:33:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:46 Parameters OK 04:33:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:46 Set A/D data flow result=40 04:33:46 Set A/D channel type result=40 04:33:46 Set A/D encoding result=40 04:33:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:46 Set channel filter=0.000000e+000 result=40 04:33:46 Config A/D Result=40 04:33:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:46 Get A/D filter: -9.255963e+061 result=40 04:33:46 Get A/D value=-858993460 result=40 04:33:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:33:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:33:46 Aux= 04:33:46 Message to Camera, serial 53214 queued 04:34:23 Received message from Master: op=PointingHead serial=53227 04:34:23 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:34:23 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:34:23 Point started: ret=0 04:34:23 point_skyscan result=0 04:34:24 Check angles 04:34:24 SkyScan query 04:34:25 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.75<-13450 Statuses=0009 0009 04:34:25 Msec=0 True Az=152.94 Ze=-21.75 Az status=0009 Ze status=0009 04:34:25 Check angles 04:34:25 SkyScan query 04:34:25 SkyScan query done: ret=0 az=135.21<-9014 ze=-0.33<-12022 Statuses=0009 0009 04:34:25 Msec=750 True Az=135.21 Ze=-0.33 Az status=0009 Ze status=0009 04:34:26 Check angles 04:34:26 SkyScan query 04:34:26 SkyScan query done: ret=0 az=117.54<-7836 ze=20.61<-10626 Statuses=0009 0009 04:34:26 Msec=1500 True Az=117.54 Ze=20.61 Az status=0009 Ze status=0009 04:34:26 Check angles 04:34:26 SkyScan query 04:34:27 SkyScan query done: ret=0 az=100.155<-6677 ze=41.565<-9229 Statuses=0009 0009 04:34:27 Msec=2250 True Az=100.155 Ze=41.565 Az status=0009 Ze status=0009 04:34:27 Check angles 04:34:27 SkyScan query 04:34:28 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 04:34:28 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 04:34:28 Check angles 04:34:28 SkyScan query 04:34:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:34:28 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:34:28 Message to Master queued w/err=0: serial=53227 error=0 04:34:33 Received message from Master: op=Filter serial=53228 04:34:33 Color wheel filter change from 0 to 0 04:34:33 FLIGetFilterPos err=0 currentPosition=0 04:34:33 FLIGetStepsRemaining err=0 RemainingSteps=0 04:34:33 Filter is already there-color wheel unchanged 04:34:34 Received message from Master: op=Shutter serial=53229 04:34:34 Shutter LASER close 04:34:34 Received message from Camera: op=State serial=53231 04:34:34 GetSingleValue result=40 Value=cccccccc 04:34:34 SkyScan query 04:34:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:34:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:34 Parameters OK 04:34:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:34 Set A/D data flow result=40 04:34:34 Set A/D channel type result=40 04:34:34 Set A/D encoding result=40 04:34:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:34 Set channel filter=0.000000e+000 result=40 04:34:34 Config A/D Result=40 04:34:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:34 Get A/D filter: -9.255963e+061 result=40 04:34:34 Get A/D value=-858993460 result=40 04:34:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:34 Parameters OK 04:34:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:34 Set A/D data flow result=40 04:34:34 Set A/D channel type result=40 04:34:34 Set A/D encoding result=40 04:34:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:34 Set channel filter=0.000000e+000 result=40 04:34:34 Config A/D Result=40 04:34:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:34 Get A/D filter: -9.255963e+061 result=40 04:34:34 Get A/D value=-858993460 result=40 04:34:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:34:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:34:34 Aux= 04:34:34 Message to Camera, serial 53231 queued 04:35:11 Received message from Master: op=PointingHead serial=53244 04:35:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:35:11 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:35:11 Point started: ret=0 04:35:11 point_skyscan result=0 04:35:12 Check angles 04:35:12 SkyScan query 04:35:13 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 04:35:13 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 04:35:13 Check angles 04:35:13 SkyScan query 04:35:14 SkyScan query done: ret=0 az=126.72<-8448 ze=38.505<-9433 Statuses=0009 0008 04:35:14 Msec=750 True Az=126.72 Ze=38.505 Az status=0009 Ze status=0008 04:35:14 Check angles 04:35:14 SkyScan query 04:35:14 SkyScan query done: ret=0 az=144.555<-9637 ze=38.505<-9433 Statuses=0009 0008 04:35:14 Msec=1500 True Az=144.555 Ze=38.505 Az status=0009 Ze status=0008 04:35:14 Check angles 04:35:14 SkyScan query 04:35:15 SkyScan query done: ret=0 az=162<-10800 ze=38.505<-9433 Statuses=0009 0008 04:35:15 Msec=2250 True Az=162 Ze=38.505 Az status=0009 Ze status=0008 04:35:15 Check angles 04:35:15 SkyScan query 04:35:16 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:35:16 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:35:16 Check angles 04:35:16 SkyScan query 04:35:17 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:35:17 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:35:17 Message to Master queued w/err=0: serial=53244 error=0 04:35:22 Received message from Master: op=Filter serial=53245 04:35:22 Color wheel filter change from 0 to 0 04:35:22 FLIGetFilterPos err=0 currentPosition=0 04:35:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:35:22 Filter is already there-color wheel unchanged 04:35:22 Received message from Master: op=Shutter serial=53246 04:35:22 Shutter LASER close 04:35:22 Received message from Camera: op=State serial=53248 04:35:22 GetSingleValue result=40 Value=cccccccc 04:35:22 SkyScan query 04:35:22 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:35:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:22 Parameters OK 04:35:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:22 Set A/D data flow result=40 04:35:22 Set A/D channel type result=40 04:35:22 Set A/D encoding result=40 04:35:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:22 Set channel filter=0.000000e+000 result=40 04:35:22 Config A/D Result=40 04:35:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:22 Get A/D filter: -9.255963e+061 result=40 04:35:22 Get A/D value=-858993460 result=40 04:35:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:22 Parameters OK 04:35:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:22 Set A/D data flow result=40 04:35:22 Set A/D channel type result=40 04:35:22 Set A/D encoding result=40 04:35:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:22 Set channel filter=0.000000e+000 result=40 04:35:22 Config A/D Result=40 04:35:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:22 Get A/D filter: -9.255963e+061 result=40 04:35:22 Get A/D value=-858993460 result=40 04:35:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:35:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:35:22 Aux= 04:35:22 Message to Camera, serial 53248 queued [UTC 2018-12-11 04:35:54] 04:35:59 Received message from Master: op=PointingHead serial=53261 04:35:59 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:35:59 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:36:00 Point started: ret=0 04:36:00 point_skyscan result=0 04:36:00 Check angles 04:36:00 SkyScan query 04:36:01 SkyScan query done: ret=0 az=153.12<-10208 ze=8.88<-11408 Statuses=0009 0009 04:36:01 Msec=0 True Az=153.12 Ze=8.88 Az status=0009 Ze status=0009 04:36:01 Check angles 04:36:01 SkyScan query 04:36:02 SkyScan query done: ret=0 az=135.78<-9052 ze=-12.09<-12806 Statuses=0009 0009 04:36:02 Msec=750 True Az=135.78 Ze=-12.09 Az status=0009 Ze status=0009 04:36:02 Check angles 04:36:02 SkyScan query 04:36:02 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.435<-14229 Statuses=0009 0009 04:36:02 Msec=1500 True Az=117.78 Ze=-33.435 Az status=0009 Ze status=0009 04:36:03 Check angles 04:36:03 SkyScan query 04:36:03 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.555<-15437 Statuses=0009 0009 04:36:03 Msec=2250 True Az=100.38 Ze=-51.555 Az status=0009 Ze status=0009 04:36:03 Check angles 04:36:03 SkyScan query 04:36:04 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 04:36:04 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 04:36:04 Check angles 04:36:04 SkyScan query 04:36:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:36:05 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:36:05 Message to Master queued w/err=0: serial=53261 error=0 04:36:10 Received message from Master: op=Filter serial=53262 04:36:10 Color wheel filter change from 0 to 0 04:36:10 FLIGetFilterPos err=0 currentPosition=0 04:36:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:36:10 Filter is already there-color wheel unchanged 04:36:10 Received message from Master: op=Shutter serial=53263 04:36:10 Shutter LASER close 04:36:10 Received message from Camera: op=State serial=53265 04:36:10 GetSingleValue result=40 Value=cccccccc 04:36:10 SkyScan query 04:36:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:36:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:11 Parameters OK 04:36:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:11 Set A/D data flow result=40 04:36:11 Set A/D channel type result=40 04:36:11 Set A/D encoding result=40 04:36:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:11 Set channel filter=0.000000e+000 result=40 04:36:11 Config A/D Result=40 04:36:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:11 Get A/D filter: -9.255963e+061 result=40 04:36:11 Get A/D value=-858993460 result=40 04:36:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:11 Parameters OK 04:36:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:11 Set A/D data flow result=40 04:36:11 Set A/D channel type result=40 04:36:11 Set A/D encoding result=40 04:36:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:11 Set channel filter=0.000000e+000 result=40 04:36:11 Config A/D Result=40 04:36:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:11 Get A/D filter: -9.255963e+061 result=40 04:36:11 Get A/D value=-858993460 result=40 04:36:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:36:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:36:11 Aux= 04:36:11 Message to Camera, serial 53265 queued 04:36:47 Received message from Master: op=PointingHead serial=53278 04:36:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:36:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:36:48 Point started: ret=0 04:36:48 point_skyscan result=0 04:36:48 Check angles 04:36:48 SkyScan query 04:36:49 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.39<-17426 Statuses=0009 0009 04:36:49 Msec=0 True Az=109.17 Ze=-81.39 Az status=0009 Ze status=0009 04:36:49 Check angles 04:36:49 SkyScan query 04:36:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.375<-18825 Statuses=0008 0009 04:36:50 Msec=750 True Az=112.995 Ze=-102.375 Az status=0008 Ze status=0009 04:36:50 Check angles 04:36:50 SkyScan query 04:36:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.315<-20221 Statuses=0008 0009 04:36:51 Msec=1500 True Az=112.995 Ze=-123.315 Az status=0008 Ze status=0009 04:36:51 Check angles 04:36:51 SkyScan query 04:36:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.3<-21620 Statuses=0008 0009 04:36:51 Msec=2250 True Az=112.995 Ze=-144.3 Az status=0008 Ze status=0009 04:36:51 Check angles 04:36:51 SkyScan query 04:36:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.225<-23015 Statuses=0008 0009 04:36:52 Msec=3000 True Az=112.995 Ze=-165.225 Az status=0008 Ze status=0009 04:36:52 Check angles 04:36:52 SkyScan query 04:36:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 04:36:53 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 04:36:53 Message to Master queued w/err=0: serial=53278 error=0 04:36:58 Received message from Master: op=Filter serial=53279 04:36:58 Color wheel filter change from 0 to 0 04:36:58 FLIGetFilterPos err=0 currentPosition=0 04:36:58 FLIGetStepsRemaining err=0 RemainingSteps=0 04:36:58 Filter is already there-color wheel unchanged 04:36:58 Received message from Master: op=Shutter serial=53280 04:36:58 Shutter LASER open 04:36:58 Received message from Camera: op=State serial=53282 04:36:58 GetSingleValue result=40 Value=cccccccc 04:36:58 SkyScan query 04:36:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:36:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:59 Parameters OK 04:36:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:59 Set A/D data flow result=40 04:36:59 Set A/D channel type result=40 04:36:59 Set A/D encoding result=40 04:36:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:59 Set channel filter=0.000000e+000 result=40 04:36:59 Config A/D Result=40 04:36:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:59 Get A/D filter: -9.255963e+061 result=40 04:36:59 Get A/D value=-858993460 result=40 04:36:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:59 Parameters OK 04:36:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:59 Set A/D data flow result=40 04:36:59 Set A/D channel type result=40 04:36:59 Set A/D encoding result=40 04:36:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:59 Set channel filter=0.000000e+000 result=40 04:36:59 Config A/D Result=40 04:36:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:59 Get A/D filter: -9.255963e+061 result=40 04:36:59 Get A/D value=-858993460 result=40 04:36:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:36:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:36:59 Aux= 04:36:59 Message to Camera, serial 53282 queued 04:37:07 Received message from Master: op=Shutter serial=53292 04:37:07 Shutter LASER close 04:37:08 Received message from Master: op=PointingHead serial=53296 04:37:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:37:08 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:37:08 Point started: ret=0 04:37:08 point_skyscan result=0 04:37:09 Check angles 04:37:09 SkyScan query 04:37:09 SkyScan query done: ret=0 az=89.835<-5989 ze=157.125<-1525 Statuses=0009 0009 04:37:09 Msec=0 True Az=89.835 Ze=157.125 Az status=0009 Ze status=0009 04:37:09 Check angles 04:37:09 SkyScan query 04:37:10 SkyScan query done: ret=0 az=72.735<-4849 ze=136.545<-2897 Statuses=0009 0009 04:37:10 Msec=750 True Az=72.735 Ze=136.545 Az status=0009 Ze status=0009 04:37:10 Check angles 04:37:10 SkyScan query 04:37:11 SkyScan query done: ret=0 az=55.215<-3681 ze=115.68<-4288 Statuses=0009 0009 04:37:11 Msec=1500 True Az=55.215 Ze=115.68 Az status=0009 Ze status=0009 04:37:11 Check angles 04:37:11 SkyScan query 04:37:12 SkyScan query done: ret=0 az=40.86<-2724 ze=94.65<-5690 Statuses=0009 0009 04:37:12 Msec=2250 True Az=40.86 Ze=94.65 Az status=0009 Ze status=0009 04:37:12 Check angles 04:37:12 SkyScan query 04:37:12 SkyScan query done: ret=0 az=40.995<-2733 ze=73.29<-7114 Statuses=0008 0009 04:37:12 Msec=3000 True Az=40.995 Ze=73.29 Az status=0008 Ze status=0009 04:37:12 Check angles 04:37:12 SkyScan query 04:37:13 SkyScan query done: ret=0 az=40.995<-2733 ze=52.74<-8484 Statuses=0008 0009 04:37:13 Msec=3750 True Az=40.995 Ze=52.74 Az status=0008 Ze status=0009 04:37:13 Check angles 04:37:13 SkyScan query 04:37:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:37:14 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:37:14 Message to Master queued w/err=0: serial=53296 error=0 04:37:19 Received message from Master: op=Filter serial=53297 04:37:19 Color wheel filter change from 0 to 0 04:37:19 FLIGetFilterPos err=0 currentPosition=0 04:37:19 FLIGetStepsRemaining err=0 RemainingSteps=0 04:37:19 Filter is already there-color wheel unchanged 04:37:19 Received message from Master: op=Shutter serial=53298 04:37:19 Shutter LASER close 04:37:19 Received message from Camera: op=State serial=53300 04:37:19 GetSingleValue result=40 Value=cccccccc 04:37:19 SkyScan query 04:37:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:37:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:20 Parameters OK 04:37:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:20 Set A/D data flow result=40 04:37:20 Set A/D channel type result=40 04:37:20 Set A/D encoding result=40 04:37:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:20 Set channel filter=0.000000e+000 result=40 04:37:20 Config A/D Result=40 04:37:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:20 Get A/D filter: -9.255963e+061 result=40 04:37:20 Get A/D value=-858993460 result=40 04:37:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:20 Parameters OK 04:37:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:20 Set A/D data flow result=40 04:37:20 Set A/D channel type result=40 04:37:20 Set A/D encoding result=40 04:37:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:20 Set channel filter=0.000000e+000 result=40 04:37:20 Config A/D Result=40 04:37:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:20 Get A/D filter: -9.255963e+061 result=40 04:37:20 Get A/D value=-858993460 result=40 04:37:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:37:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:37:20 Aux= 04:37:20 Message to Camera, serial 53300 queued 04:37:57 Received message from Master: op=PointingHead serial=53313 04:37:57 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:37:57 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:37:57 Point started: ret=0 04:37:57 point_skyscan result=0 04:37:58 Check angles 04:37:58 SkyScan query 04:37:58 SkyScan query done: ret=0 az=63.72<-4248 ze=66.54<-7564 Statuses=0009 0008 04:37:58 Msec=0 True Az=63.72 Ze=66.54 Az status=0009 Ze status=0008 04:37:58 Check angles 04:37:58 SkyScan query 04:37:59 SkyScan query done: ret=0 az=81.51<-5434 ze=66.51<-7566 Statuses=0009 0008 04:37:59 Msec=750 True Az=81.51 Ze=66.51 Az status=0009 Ze status=0008 04:37:59 Check angles 04:37:59 SkyScan query 04:38:00 SkyScan query done: ret=0 az=99.45<-6630 ze=66.495<-7567 Statuses=0009 0008 04:38:00 Msec=1500 True Az=99.45 Ze=66.495 Az status=0009 Ze status=0008 04:38:00 Check angles 04:38:00 SkyScan query 04:38:00 SkyScan query done: ret=0 az=116.985<-7799 ze=66.495<-7567 Statuses=0009 0008 04:38:00 Msec=2250 True Az=116.985 Ze=66.495 Az status=0009 Ze status=0008 04:38:01 Check angles 04:38:01 SkyScan query 04:38:01 SkyScan query done: ret=0 az=134.46<-8964 ze=66.495<-7567 Statuses=0009 0008 04:38:01 Msec=3000 True Az=134.46 Ze=66.495 Az status=0009 Ze status=0008 04:38:01 Check angles 04:38:01 SkyScan query 04:38:02 SkyScan query done: ret=0 az=151.935<-10129 ze=66.495<-7567 Statuses=0009 0008 04:38:02 Msec=3750 True Az=151.935 Ze=66.495 Az status=0009 Ze status=0008 04:38:02 Check angles 04:38:02 SkyScan query 04:38:03 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 04:38:03 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 04:38:03 Message to Master queued w/err=0: serial=53313 error=0 04:38:08 Received message from Master: op=Filter serial=53314 04:38:08 Color wheel filter change from 0 to 0 04:38:08 FLIGetFilterPos err=0 currentPosition=0 04:38:08 FLIGetStepsRemaining err=0 RemainingSteps=0 04:38:08 Filter is already there-color wheel unchanged 04:38:08 Received message from Master: op=Shutter serial=53315 04:38:08 Shutter LASER close 04:38:08 Received message from Camera: op=State serial=53317 04:38:08 GetSingleValue result=40 Value=cccccccc 04:38:08 SkyScan query 04:38:09 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:38:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:09 Parameters OK 04:38:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:09 Set A/D data flow result=40 04:38:09 Set A/D channel type result=40 04:38:09 Set A/D encoding result=40 04:38:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:09 Set channel filter=0.000000e+000 result=40 04:38:09 Config A/D Result=40 04:38:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:09 Get A/D filter: -9.255963e+061 result=40 04:38:09 Get A/D value=-858993460 result=40 04:38:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:09 Parameters OK 04:38:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:09 Set A/D data flow result=40 04:38:09 Set A/D channel type result=40 04:38:09 Set A/D encoding result=40 04:38:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:09 Set channel filter=0.000000e+000 result=40 04:38:09 Config A/D Result=40 04:38:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:09 Get A/D filter: -9.255963e+061 result=40 04:38:09 Get A/D value=-858993460 result=40 04:38:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:09 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:38:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:38:09 Aux= 04:38:09 Message to Camera, serial 53317 queued 04:38:45 Received message from Master: op=PointingHead serial=53330 04:38:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:38:45 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:38:46 Point started: ret=0 04:38:46 point_skyscan result=0 04:38:46 Check angles 04:38:46 SkyScan query 04:38:47 SkyScan query done: ret=0 az=134.805<-8987 ze=36.555<-9563 Statuses=0009 0009 04:38:47 Msec=0 True Az=134.805 Ze=36.555 Az status=0009 Ze status=0009 04:38:47 Check angles 04:38:47 SkyScan query 04:38:48 SkyScan query done: ret=0 az=117.255<-7817 ze=15.66<-10956 Statuses=0009 0009 04:38:48 Msec=750 True Az=117.255 Ze=15.66 Az status=0009 Ze status=0009 04:38:48 Check angles 04:38:48 SkyScan query 04:38:49 SkyScan query done: ret=0 az=100.02<-6668 ze=-5.355<-12357 Statuses=0009 0009 04:38:49 Msec=1500 True Az=100.02 Ze=-5.355 Az status=0009 Ze status=0009 04:38:49 Check angles 04:38:49 SkyScan query 04:38:49 SkyScan query done: ret=0 az=82.185<-5479 ze=-26.73<-13782 Statuses=0009 0009 04:38:49 Msec=2250 True Az=82.185 Ze=-26.73 Az status=0009 Ze status=0009 04:38:49 Check angles 04:38:49 SkyScan query 04:38:50 SkyScan query done: ret=0 az=64.605<-4307 ze=-38.565<-14571 Statuses=0009 0008 04:38:50 Msec=3000 True Az=64.605 Ze=-38.565 Az status=0009 Ze status=0008 04:38:50 Check angles 04:38:50 SkyScan query 04:38:51 SkyScan query done: ret=0 az=47.115<-3141 ze=-38.535<-14569 Statuses=0009 0008 04:38:51 Msec=3750 True Az=47.115 Ze=-38.535 Az status=0009 Ze status=0008 04:38:51 Check angles 04:38:51 SkyScan query 04:38:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:38:52 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:38:52 Message to Master queued w/err=0: serial=53330 error=0 04:38:57 Received message from Master: op=Filter serial=53331 04:38:57 Color wheel filter change from 0 to 0 04:38:57 FLIGetFilterPos err=0 currentPosition=0 04:38:57 FLIGetStepsRemaining err=0 RemainingSteps=0 04:38:57 Filter is already there-color wheel unchanged 04:38:57 Received message from Master: op=Shutter serial=53332 04:38:57 Shutter LASER close 04:38:57 Received message from Camera: op=State serial=53334 04:38:57 GetSingleValue result=40 Value=cccccccc 04:38:57 SkyScan query 04:38:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:38:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:57 Parameters OK 04:38:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:57 Set A/D data flow result=40 04:38:57 Set A/D channel type result=40 04:38:57 Set A/D encoding result=40 04:38:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:57 Set channel filter=0.000000e+000 result=40 04:38:57 Config A/D Result=40 04:38:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:57 Get A/D filter: -9.255963e+061 result=40 04:38:57 Get A/D value=-858993460 result=40 04:38:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:57 Parameters OK 04:38:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:57 Set A/D data flow result=40 04:38:57 Set A/D channel type result=40 04:38:57 Set A/D encoding result=40 04:38:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:57 Set channel filter=0.000000e+000 result=40 04:38:57 Config A/D Result=40 04:38:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:57 Get A/D filter: -9.255963e+061 result=40 04:38:57 Get A/D value=-858993460 result=40 04:38:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:38:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:38:57 Aux= 04:38:57 Message to Camera, serial 53334 queued 04:39:34 Received message from Master: op=PointingHead serial=53347 04:39:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:39:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:39:35 Point started: ret=0 04:39:35 point_skyscan result=0 04:39:35 Check angles 04:39:35 SkyScan query 04:39:36 SkyScan query done: ret=0 az=64.44<-4296 ze=-68.775<-16585 Statuses=0009 0009 04:39:36 Msec=0 True Az=64.44 Ze=-68.775 Az status=0009 Ze status=0009 04:39:36 Check angles 04:39:36 SkyScan query 04:39:37 SkyScan query done: ret=0 az=82.305<-5487 ze=-90.135<-18009 Statuses=0009 0009 04:39:37 Msec=750 True Az=82.305 Ze=-90.135 Az status=0009 Ze status=0009 04:39:37 Check angles 04:39:37 SkyScan query 04:39:37 SkyScan query done: ret=0 az=100.065<-6671 ze=-111.525<-19435 Statuses=0009 0009 04:39:37 Msec=1500 True Az=100.065 Ze=-111.525 Az status=0009 Ze status=0009 04:39:38 Check angles 04:39:38 SkyScan query 04:39:38 SkyScan query done: ret=0 az=117.585<-7839 ze=-132.465<-20831 Statuses=0009 0009 04:39:38 Msec=2250 True Az=117.585 Ze=-132.465 Az status=0009 Ze status=0009 04:39:38 Check angles 04:39:38 SkyScan query 04:39:39 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 04:39:39 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 04:39:39 Check angles 04:39:39 SkyScan query 04:39:40 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:39:40 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:39:40 Message to Master queued w/err=0: serial=53347 error=0 04:39:45 Received message from Master: op=Filter serial=53348 04:39:45 Color wheel filter change from 0 to 0 04:39:45 FLIGetFilterPos err=0 currentPosition=0 04:39:45 FLIGetStepsRemaining err=0 RemainingSteps=0 04:39:45 Filter is already there-color wheel unchanged 04:39:45 Received message from Master: op=Shutter serial=53349 04:39:45 Shutter LASER close 04:39:45 Received message from Camera: op=State serial=53351 04:39:45 GetSingleValue result=40 Value=cccccccc 04:39:45 SkyScan query 04:39:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:39:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:45 Parameters OK 04:39:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:45 Set A/D data flow result=40 04:39:45 Set A/D channel type result=40 04:39:45 Set A/D encoding result=40 04:39:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:45 Set channel filter=0.000000e+000 result=40 04:39:45 Config A/D Result=40 04:39:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:45 Get A/D filter: -9.255963e+061 result=40 04:39:45 Get A/D value=-858993460 result=40 04:39:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:45 Parameters OK 04:39:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:45 Set A/D data flow result=40 04:39:45 Set A/D channel type result=40 04:39:45 Set A/D encoding result=40 04:39:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:45 Set channel filter=0.000000e+000 result=40 04:39:45 Config A/D Result=40 04:39:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:45 Get A/D filter: -9.255963e+061 result=40 04:39:45 Get A/D value=-858993460 result=40 04:39:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:45 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:39:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:39:45 Aux= 04:39:45 Message to Camera, serial 53351 queued 04:40:22 Received message from Master: op=PointingHead serial=53364 04:40:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:40:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:40:23 Point started: ret=0 04:40:23 point_skyscan result=0 04:40:23 Check angles 04:40:23 SkyScan query 04:40:24 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.18<-23412 Statuses=0009 0009 04:40:24 Msec=0 True Az=113.01 Ze=-171.18 Az status=0009 Ze status=0009 04:40:24 Check angles 04:40:24 SkyScan query 04:40:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:40:25 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:40:25 Message to Master queued w/err=0: serial=53364 error=0 04:40:30 Received message from Master: op=Filter serial=53365 04:40:30 Color wheel filter change from 0 to 0 04:40:30 FLIGetFilterPos err=0 currentPosition=0 04:40:30 FLIGetStepsRemaining err=0 RemainingSteps=0 04:40:30 Filter is already there-color wheel unchanged 04:40:30 Received message from Master: op=Shutter serial=53366 04:40:30 Shutter LASER open 04:40:30 Received message from Camera: op=State serial=53368 04:40:30 GetSingleValue result=40 Value=cccccccc 04:40:30 SkyScan query 04:40:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:40:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:31 Parameters OK 04:40:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:31 Set A/D data flow result=40 04:40:31 Set A/D channel type result=40 04:40:31 Set A/D encoding result=40 04:40:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:31 Set channel filter=0.000000e+000 result=40 04:40:31 Config A/D Result=40 04:40:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:31 Get A/D filter: -9.255963e+061 result=40 04:40:31 Get A/D value=-858993460 result=40 04:40:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:31 Parameters OK 04:40:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:31 Set A/D data flow result=40 04:40:31 Set A/D channel type result=40 04:40:31 Set A/D encoding result=40 04:40:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:31 Set channel filter=0.000000e+000 result=40 04:40:31 Config A/D Result=40 04:40:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:31 Get A/D filter: -9.255963e+061 result=40 04:40:31 Get A/D value=-858993460 result=40 04:40:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:40:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:40:31 Aux= 04:40:31 Message to Camera, serial 53368 queued 04:40:39 Received message from Master: op=Shutter serial=53378 04:40:39 Shutter LASER close 04:40:40 Received message from Master: op=PointingHead serial=53382 04:40:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:40:40 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:40:40 Point started: ret=0 04:40:40 point_skyscan result=0 04:40:41 Check angles 04:40:41 SkyScan query 04:40:41 SkyScan query done: ret=0 az=136.005<-9067 ze=-143.055<-21537 Statuses=0009 0009 04:40:41 Msec=0 True Az=136.005 Ze=-143.055 Az status=0009 Ze status=0009 04:40:42 Check angles 04:40:42 SkyScan query 04:40:42 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.16<-20144 Statuses=0009 0009 04:40:42 Msec=750 True Az=153.57 Ze=-122.16 Az status=0009 Ze status=0009 04:40:42 Check angles 04:40:42 SkyScan query 04:40:43 SkyScan query done: ret=0 az=170.985<-11399 ze=-101.265<-18751 Statuses=0009 0009 04:40:43 Msec=1500 True Az=170.985 Ze=-101.265 Az status=0009 Ze status=0009 04:40:43 Check angles 04:40:43 SkyScan query 04:40:44 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.295<-17353 Statuses=0008 0009 04:40:44 Msec=2250 True Az=176.025 Ze=-80.295 Az status=0008 Ze status=0009 04:40:44 Check angles 04:40:44 SkyScan query 04:40:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.34<-15956 Statuses=0008 0009 04:40:44 Msec=3000 True Az=176.01 Ze=-59.34 Az status=0008 Ze status=0009 04:40:45 Check angles 04:40:45 SkyScan query 04:40:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:40:45 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:40:45 Message to Master queued w/err=0: serial=53382 error=0 04:40:50 Received message from Master: op=Filter serial=53383 04:40:50 Color wheel filter change from 0 to 0 04:40:50 FLIGetFilterPos err=0 currentPosition=0 04:40:50 FLIGetStepsRemaining err=0 RemainingSteps=0 04:40:50 Filter is already there-color wheel unchanged 04:40:50 Received message from Master: op=Shutter serial=53384 04:40:50 Shutter LASER close 04:40:50 Received message from Camera: op=State serial=53386 04:40:50 GetSingleValue result=40 Value=cccccccc 04:40:50 SkyScan query 04:40:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:40:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:51 Parameters OK 04:40:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:51 Set A/D data flow result=40 04:40:51 Set A/D channel type result=40 04:40:51 Set A/D encoding result=40 04:40:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:51 Set channel filter=0.000000e+000 result=40 04:40:51 Config A/D Result=40 04:40:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:51 Get A/D filter: -9.255963e+061 result=40 04:40:51 Get A/D value=-858993460 result=40 04:40:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:51 Parameters OK 04:40:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:51 Set A/D data flow result=40 04:40:51 Set A/D channel type result=40 04:40:51 Set A/D encoding result=40 04:40:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:51 Set channel filter=0.000000e+000 result=40 04:40:51 Config A/D Result=40 04:40:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:51 Get A/D filter: -9.255963e+061 result=40 04:40:51 Get A/D value=-858993460 result=40 04:40:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:40:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:40:51 Aux= 04:40:51 Message to Camera, serial 53386 queued 04:41:28 Received message from Master: op=PointingHead serial=53399 04:41:28 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:41:28 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:41:28 Point started: ret=0 04:41:28 point_skyscan result=0 04:41:29 Check angles 04:41:29 SkyScan query 04:41:30 SkyScan query done: ret=0 az=152.565<-10171 ze=-21.12<-13408 Statuses=0009 0009 04:41:30 Msec=0 True Az=152.565 Ze=-21.12 Az status=0009 Ze status=0009 04:41:30 Check angles 04:41:30 SkyScan query 04:41:30 SkyScan query done: ret=0 az=134.64<-8976 ze=0.255<-11983 Statuses=0009 0009 04:41:30 Msec=750 True Az=134.64 Ze=0.255 Az status=0009 Ze status=0009 04:41:31 Check angles 04:41:31 SkyScan query 04:41:31 SkyScan query done: ret=0 az=117.075<-7805 ze=21.255<-10583 Statuses=0009 0009 04:41:31 Msec=1500 True Az=117.075 Ze=21.255 Az status=0009 Ze status=0009 04:41:31 Check angles 04:41:31 SkyScan query 04:41:32 SkyScan query done: ret=0 az=99.81<-6654 ze=42.15<-9190 Statuses=0009 0009 04:41:32 Msec=2250 True Az=99.81 Ze=42.15 Az status=0009 Ze status=0009 04:41:32 Check angles 04:41:32 SkyScan query 04:41:33 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 04:41:33 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 04:41:33 Check angles 04:41:33 SkyScan query 04:41:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:41:33 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:41:33 Message to Master queued w/err=0: serial=53399 error=0 04:41:38 Received message from Master: op=Filter serial=53400 04:41:38 Color wheel filter change from 0 to 0 04:41:38 FLIGetFilterPos err=0 currentPosition=0 04:41:38 FLIGetStepsRemaining err=0 RemainingSteps=0 04:41:38 Filter is already there-color wheel unchanged 04:41:39 Received message from Master: op=Shutter serial=53401 04:41:39 Shutter LASER close 04:41:39 Received message from Camera: op=State serial=53403 04:41:39 GetSingleValue result=40 Value=cccccccc 04:41:39 SkyScan query 04:41:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:41:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:39 Parameters OK 04:41:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:39 Set A/D data flow result=40 04:41:39 Set A/D channel type result=40 04:41:39 Set A/D encoding result=40 04:41:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:39 Set channel filter=0.000000e+000 result=40 04:41:39 Config A/D Result=40 04:41:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:39 Get A/D filter: -9.255963e+061 result=40 04:41:39 Get A/D value=-858993460 result=40 04:41:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:39 Parameters OK 04:41:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:39 Set A/D data flow result=40 04:41:39 Set A/D channel type result=40 04:41:39 Set A/D encoding result=40 04:41:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:39 Set channel filter=0.000000e+000 result=40 04:41:39 Config A/D Result=40 04:41:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:39 Get A/D filter: -9.255963e+061 result=40 04:41:39 Get A/D value=-858993460 result=40 04:41:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:41:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:41:39 Aux= 04:41:39 Message to Camera, serial 53403 queued 04:42:16 Received message from Master: op=PointingHead serial=53416 04:42:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:42:16 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:42:16 Point started: ret=0 04:42:16 point_skyscan result=0 04:42:17 Check angles 04:42:17 SkyScan query 04:42:18 SkyScan query done: ret=0 az=109.2<-7280 ze=38.475<-9435 Statuses=0009 0008 04:42:18 Msec=0 True Az=109.2 Ze=38.475 Az status=0009 Ze status=0008 04:42:18 Check angles 04:42:18 SkyScan query 04:42:18 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 04:42:18 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 04:42:19 Check angles 04:42:19 SkyScan query 04:42:19 SkyScan query done: ret=0 az=144.135<-9609 ze=38.505<-9433 Statuses=0009 0008 04:42:19 Msec=1500 True Az=144.135 Ze=38.505 Az status=0009 Ze status=0008 04:42:19 Check angles 04:42:19 SkyScan query 04:42:20 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 04:42:20 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 04:42:20 Check angles 04:42:20 SkyScan query 04:42:21 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 04:42:21 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 04:42:21 Check angles 04:42:21 SkyScan query 04:42:21 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:42:21 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:42:21 Message to Master queued w/err=0: serial=53416 error=0 04:42:26 Received message from Master: op=Filter serial=53417 04:42:26 Color wheel filter change from 0 to 0 04:42:26 FLIGetFilterPos err=0 currentPosition=0 04:42:26 FLIGetStepsRemaining err=0 RemainingSteps=0 04:42:26 Filter is already there-color wheel unchanged 04:42:27 Received message from Master: op=Shutter serial=53418 04:42:27 Shutter LASER close 04:42:27 Received message from Camera: op=State serial=53420 04:42:27 GetSingleValue result=40 Value=cccccccc 04:42:27 SkyScan query 04:42:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:42:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:27 Parameters OK 04:42:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:27 Set A/D data flow result=40 04:42:27 Set A/D channel type result=40 04:42:27 Set A/D encoding result=40 04:42:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:27 Set channel filter=0.000000e+000 result=40 04:42:27 Config A/D Result=40 04:42:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:27 Get A/D filter: -9.255963e+061 result=40 04:42:27 Get A/D value=-858993460 result=40 04:42:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:27 Parameters OK 04:42:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:27 Set A/D data flow result=40 04:42:27 Set A/D channel type result=40 04:42:27 Set A/D encoding result=40 04:42:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:27 Set channel filter=0.000000e+000 result=40 04:42:27 Config A/D Result=40 04:42:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:27 Get A/D filter: -9.255963e+061 result=40 04:42:27 Get A/D value=-858993460 result=40 04:42:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:42:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:42:27 Aux= 04:42:27 Message to Camera, serial 53420 queued 04:43:04 Received message from Master: op=PointingHead serial=53433 04:43:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:43:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:43:04 Point started: ret=0 04:43:04 point_skyscan result=0 04:43:05 Check angles 04:43:05 SkyScan query 04:43:06 SkyScan query done: ret=0 az=152.94<-10196 ze=8.685<-11421 Statuses=0009 0009 04:43:06 Msec=0 True Az=152.94 Ze=8.685 Az status=0009 Ze status=0009 04:43:06 Check angles 04:43:06 SkyScan query 04:43:06 SkyScan query done: ret=0 az=135.165<-9011 ze=-12.675<-12845 Statuses=0009 0009 04:43:06 Msec=750 True Az=135.165 Ze=-12.675 Az status=0009 Ze status=0009 04:43:07 Check angles 04:43:07 SkyScan query 04:43:07 SkyScan query done: ret=0 az=117.09<-7806 ze=-34.125<-14275 Statuses=0009 0009 04:43:07 Msec=1500 True Az=117.09 Ze=-34.125 Az status=0009 Ze status=0009 04:43:07 Check angles 04:43:07 SkyScan query 04:43:08 SkyScan query done: ret=0 az=99.795<-6653 ze=-51.57<-15438 Statuses=0009 0009 04:43:08 Msec=2250 True Az=99.795 Ze=-51.57 Az status=0009 Ze status=0009 04:43:08 Check angles 04:43:08 SkyScan query 04:43:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 04:43:09 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 04:43:09 Check angles 04:43:09 SkyScan query 04:43:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:43:09 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:43:09 Message to Master queued w/err=0: serial=53433 error=0 04:43:14 Received message from Master: op=Filter serial=53434 04:43:14 Color wheel filter change from 0 to 0 04:43:14 FLIGetFilterPos err=0 currentPosition=0 04:43:14 FLIGetStepsRemaining err=0 RemainingSteps=0 04:43:14 Filter is already there-color wheel unchanged 04:43:15 Received message from Master: op=Shutter serial=53435 04:43:15 Shutter LASER close 04:43:15 Received message from Camera: op=State serial=53437 04:43:15 GetSingleValue result=40 Value=cccccccc 04:43:15 SkyScan query 04:43:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:43:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:15 Parameters OK 04:43:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:15 Set A/D data flow result=40 04:43:15 Set A/D channel type result=40 04:43:15 Set A/D encoding result=40 04:43:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:15 Set channel filter=0.000000e+000 result=40 04:43:15 Config A/D Result=40 04:43:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:15 Get A/D filter: -9.255963e+061 result=40 04:43:15 Get A/D value=-858993460 result=40 04:43:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:15 Parameters OK 04:43:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:15 Set A/D data flow result=40 04:43:15 Set A/D channel type result=40 04:43:15 Set A/D encoding result=40 04:43:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:15 Set channel filter=0.000000e+000 result=40 04:43:15 Config A/D Result=40 04:43:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:15 Get A/D filter: -9.255963e+061 result=40 04:43:15 Get A/D value=-858993460 result=40 04:43:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:43:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:43:15 Aux= 04:43:15 Message to Camera, serial 53437 queued 04:43:52 Received message from Master: op=PointingHead serial=53450 04:43:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:43:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:43:52 Point started: ret=0 04:43:52 point_skyscan result=0 04:43:53 Check angles 04:43:53 SkyScan query 04:43:54 SkyScan query done: ret=0 az=108.81<-7254 ze=-81.015<-17401 Statuses=0009 0009 04:43:54 Msec=0 True Az=108.81 Ze=-81.015 Az status=0009 Ze status=0009 04:43:54 Check angles 04:43:54 SkyScan query 04:43:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.985<-18799 Statuses=0008 0009 04:43:55 Msec=750 True Az=112.995 Ze=-101.985 Az status=0008 Ze status=0009 04:43:55 Check angles 04:43:55 SkyScan query 04:43:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.36<-20224 Statuses=0008 0009 04:43:55 Msec=1500 True Az=112.995 Ze=-123.36 Az status=0008 Ze status=0009 04:43:55 Check angles 04:43:55 SkyScan query 04:43:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.345<-21623 Statuses=0008 0009 04:43:56 Msec=2250 True Az=112.995 Ze=-144.345 Az status=0008 Ze status=0009 04:43:56 Check angles 04:43:56 SkyScan query 04:43:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.27<-23018 Statuses=0008 0009 04:43:57 Msec=3000 True Az=112.995 Ze=-165.27 Az status=0008 Ze status=0009 04:43:57 Check angles 04:43:57 SkyScan query 04:43:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:43:58 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:43:58 Message to Master queued w/err=0: serial=53450 error=0 04:44:03 Received message from Master: op=Filter serial=53451 04:44:03 Color wheel filter change from 0 to 0 04:44:03 FLIGetFilterPos err=0 currentPosition=0 04:44:03 FLIGetStepsRemaining err=0 RemainingSteps=0 04:44:03 Filter is already there-color wheel unchanged 04:44:03 Received message from Master: op=Shutter serial=53452 04:44:03 Shutter LASER open 04:44:03 Received message from Camera: op=State serial=53454 04:44:03 GetSingleValue result=40 Value=cccccccc 04:44:03 SkyScan query 04:44:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:44:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:03 Parameters OK 04:44:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:03 Set A/D data flow result=40 04:44:03 Set A/D channel type result=40 04:44:03 Set A/D encoding result=40 04:44:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:03 Set channel filter=0.000000e+000 result=40 04:44:03 Config A/D Result=40 04:44:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:03 Get A/D filter: -9.255963e+061 result=40 04:44:03 Get A/D value=-858993460 result=40 04:44:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:03 Parameters OK 04:44:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:03 Set A/D data flow result=40 04:44:03 Set A/D channel type result=40 04:44:03 Set A/D encoding result=40 04:44:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:03 Set channel filter=0.000000e+000 result=40 04:44:03 Config A/D Result=40 04:44:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:03 Get A/D filter: -9.255963e+061 result=40 04:44:03 Get A/D value=-858993460 result=40 04:44:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:44:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:44:03 Aux= 04:44:03 Message to Camera, serial 53454 queued 04:44:12 Received message from Master: op=Shutter serial=53464 04:44:12 Shutter LASER close 04:44:12 Received message from Master: op=PointingHead serial=53468 04:44:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:44:12 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:44:13 Point started: ret=0 04:44:13 point_skyscan result=0 04:44:13 Check angles 04:44:13 SkyScan query 04:44:14 SkyScan query done: ret=0 az=90.135<-6009 ze=157.47<-1502 Statuses=0009 0009 04:44:14 Msec=0 True Az=90.135 Ze=157.47 Az status=0009 Ze status=0009 04:44:14 Check angles 04:44:14 SkyScan query 04:44:15 SkyScan query done: ret=0 az=72.675<-4845 ze=136.47<-2902 Statuses=0009 0009 04:44:15 Msec=750 True Az=72.675 Ze=136.47 Az status=0009 Ze status=0009 04:44:15 Check angles 04:44:15 SkyScan query 04:44:16 SkyScan query done: ret=0 az=54.885<-3659 ze=115.125<-4325 Statuses=0009 0009 04:44:16 Msec=1500 True Az=54.885 Ze=115.125 Az status=0009 Ze status=0009 04:44:16 Check angles 04:44:16 SkyScan query 04:44:16 SkyScan query done: ret=0 az=40.875<-2725 ze=94.11<-5726 Statuses=0009 0009 04:44:16 Msec=2250 True Az=40.875 Ze=94.11 Az status=0009 Ze status=0009 04:44:16 Check angles 04:44:16 SkyScan query 04:44:17 SkyScan query done: ret=0 az=40.995<-2733 ze=73.185<-7121 Statuses=0008 0009 04:44:17 Msec=3000 True Az=40.995 Ze=73.185 Az status=0008 Ze status=0009 04:44:17 Check angles 04:44:17 SkyScan query 04:44:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 04:44:18 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 04:44:18 Check angles 04:44:18 SkyScan query 04:44:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:44:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:44:19 Message to Master queued w/err=0: serial=53468 error=0 04:44:24 Received message from Master: op=Filter serial=53469 04:44:24 Color wheel filter change from 0 to 0 04:44:24 FLIGetFilterPos err=0 currentPosition=0 04:44:24 FLIGetStepsRemaining err=0 RemainingSteps=0 04:44:24 Filter is already there-color wheel unchanged 04:44:24 Received message from Master: op=Shutter serial=53470 04:44:24 Shutter LASER close 04:44:24 Received message from Camera: op=State serial=53472 04:44:24 GetSingleValue result=40 Value=cccccccc 04:44:24 SkyScan query 04:44:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:44:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:24 Parameters OK 04:44:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:24 Set A/D data flow result=40 04:44:24 Set A/D channel type result=40 04:44:24 Set A/D encoding result=40 04:44:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:24 Set channel filter=0.000000e+000 result=40 04:44:24 Config A/D Result=40 04:44:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:24 Get A/D filter: -9.255963e+061 result=40 04:44:24 Get A/D value=-858993460 result=40 04:44:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:24 Parameters OK 04:44:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:24 Set A/D data flow result=40 04:44:24 Set A/D channel type result=40 04:44:24 Set A/D encoding result=40 04:44:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:24 Set channel filter=0.000000e+000 result=40 04:44:24 Config A/D Result=40 04:44:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:24 Get A/D filter: -9.255963e+061 result=40 04:44:24 Get A/D value=-858993460 result=40 04:44:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:44:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:44:24 Aux= 04:44:24 Message to Camera, serial 53472 queued 04:45:00 Received message from Master: op=PointingHead serial=53484 04:45:00 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:45:00 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:45:01 Point started: ret=0 04:45:01 point_skyscan result=0 04:45:02 Check angles 04:45:02 SkyScan query 04:45:02 SkyScan query done: ret=0 az=64.47<-4298 ze=66.555<-7563 Statuses=0009 0008 04:45:02 Msec=0 True Az=64.47 Ze=66.555 Az status=0009 Ze status=0008 04:45:02 Check angles 04:45:02 SkyScan query 04:45:03 SkyScan query done: ret=0 az=81.825<-5455 ze=66.495<-7567 Statuses=0009 0008 04:45:03 Msec=750 True Az=81.825 Ze=66.495 Az status=0009 Ze status=0008 04:45:03 Check angles 04:45:03 SkyScan query 04:45:04 SkyScan query done: ret=0 az=99.51<-6634 ze=66.495<-7567 Statuses=0009 0008 04:45:04 Msec=1500 True Az=99.51 Ze=66.495 Az status=0009 Ze status=0008 04:45:04 Check angles 04:45:04 SkyScan query 04:45:04 SkyScan query done: ret=0 az=117.405<-7827 ze=66.495<-7567 Statuses=0009 0008 04:45:04 Msec=2250 True Az=117.405 Ze=66.495 Az status=0009 Ze status=0008 04:45:05 Check angles 04:45:05 SkyScan query 04:45:05 SkyScan query done: ret=0 az=134.76<-8984 ze=66.495<-7567 Statuses=0009 0008 04:45:05 Msec=3000 True Az=134.76 Ze=66.495 Az status=0009 Ze status=0008 04:45:05 Check angles 04:45:05 SkyScan query 04:45:06 SkyScan query done: ret=0 az=152.25<-10150 ze=66.495<-7567 Statuses=0009 0008 04:45:06 Msec=3750 True Az=152.25 Ze=66.495 Az status=0009 Ze status=0008 04:45:06 Check angles 04:45:06 SkyScan query 04:45:07 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 04:45:07 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 04:45:07 Message to Master queued w/err=0: serial=53484 error=0 04:45:12 Received message from Master: op=Filter serial=53485 04:45:12 Color wheel filter change from 0 to 0 04:45:12 FLIGetFilterPos err=0 currentPosition=0 04:45:12 FLIGetStepsRemaining err=0 RemainingSteps=0 04:45:12 Filter is already there-color wheel unchanged 04:45:12 Received message from Master: op=Shutter serial=53486 04:45:12 Shutter LASER close 04:45:12 Received message from Camera: op=State serial=53488 04:45:12 GetSingleValue result=40 Value=cccccccc 04:45:12 SkyScan query 04:45:12 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:45:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:12 Parameters OK 04:45:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:12 Set A/D data flow result=40 04:45:12 Set A/D channel type result=40 04:45:12 Set A/D encoding result=40 04:45:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:12 Set channel filter=0.000000e+000 result=40 04:45:12 Config A/D Result=40 04:45:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:12 Get A/D filter: -9.255963e+061 result=40 04:45:12 Get A/D value=-858993460 result=40 04:45:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:12 Parameters OK 04:45:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:12 Set A/D data flow result=40 04:45:12 Set A/D channel type result=40 04:45:12 Set A/D encoding result=40 04:45:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:12 Set channel filter=0.000000e+000 result=40 04:45:12 Config A/D Result=40 04:45:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:12 Get A/D filter: -9.255963e+061 result=40 04:45:12 Get A/D value=-858993460 result=40 [UTC 2018-12-11 04:45:12] 04:45:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:12 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:45:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:45:12 Aux= 04:45:12 Message to Camera, serial 53488 queued 04:45:29 Received message from Master: op=Identify serial=53489 04:45:49 Received message from Master: op=PointingHead serial=53504 04:45:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:45:49 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:45:50 Point started: ret=0 04:45:50 point_skyscan result=0 04:45:50 Check angles 04:45:50 SkyScan query 04:45:51 SkyScan query done: ret=0 az=135.135<-9009 ze=36.855<-9543 Statuses=0009 0009 04:45:51 Msec=0 True Az=135.135 Ze=36.855 Az status=0009 Ze status=0009 04:45:51 Check angles 04:45:51 SkyScan query 04:45:52 SkyScan query done: ret=0 az=117.555<-7837 ze=15.915<-10939 Statuses=0009 0009 04:45:52 Msec=750 True Az=117.555 Ze=15.915 Az status=0009 Ze status=0009 04:45:52 Check angles 04:45:52 SkyScan query 04:45:52 SkyScan query done: ret=0 az=100.26<-6684 ze=-5.055<-12337 Statuses=0009 0009 04:45:52 Msec=1500 True Az=100.26 Ze=-5.055 Az status=0009 Ze status=0009 04:45:53 Check angles 04:45:53 SkyScan query 04:45:53 SkyScan query done: ret=0 az=82.71<-5514 ze=-25.98<-13732 Statuses=0009 0009 04:45:53 Msec=2250 True Az=82.71 Ze=-25.98 Az status=0009 Ze status=0009 04:45:53 Check angles 04:45:53 SkyScan query 04:45:54 SkyScan query done: ret=0 az=65.28<-4352 ze=-38.565<-14571 Statuses=0009 0008 04:45:54 Msec=3000 True Az=65.28 Ze=-38.565 Az status=0009 Ze status=0008 04:45:54 Check angles 04:45:54 SkyScan query 04:45:55 SkyScan query done: ret=0 az=47.79<-3186 ze=-38.535<-14569 Statuses=0009 0008 04:45:55 Msec=3750 True Az=47.79 Ze=-38.535 Az status=0009 Ze status=0008 04:45:55 Check angles 04:45:55 SkyScan query 04:45:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:45:55 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:45:55 Message to Master queued w/err=0: serial=53504 error=0 04:46:00 Received message from Master: op=Filter serial=53505 04:46:00 Color wheel filter change from 0 to 0 04:46:00 FLIGetFilterPos err=0 currentPosition=0 04:46:00 FLIGetStepsRemaining err=0 RemainingSteps=0 04:46:00 Filter is already there-color wheel unchanged 04:46:01 Received message from Master: op=Shutter serial=53506 04:46:01 Shutter LASER close 04:46:01 Received message from Camera: op=State serial=53508 04:46:01 GetSingleValue result=40 Value=cccccccc 04:46:01 SkyScan query 04:46:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:46:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:01 Parameters OK 04:46:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:01 Set A/D data flow result=40 04:46:01 Set A/D channel type result=40 04:46:01 Set A/D encoding result=40 04:46:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:01 Set channel filter=0.000000e+000 result=40 04:46:01 Config A/D Result=40 04:46:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:01 Get A/D filter: -9.255963e+061 result=40 04:46:01 Get A/D value=-858993460 result=40 04:46:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:01 Parameters OK 04:46:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:01 Set A/D data flow result=40 04:46:01 Set A/D channel type result=40 04:46:01 Set A/D encoding result=40 04:46:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:01 Set channel filter=0.000000e+000 result=40 04:46:01 Config A/D Result=40 04:46:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:01 Get A/D filter: -9.255963e+061 result=40 04:46:01 Get A/D value=-858993460 result=40 04:46:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:46:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:46:01 Aux= 04:46:01 Message to Camera, serial 53508 queued 04:46:38 Received message from Master: op=PointingHead serial=53521 04:46:38 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:46:38 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:46:38 Point started: ret=0 04:46:38 point_skyscan result=0 04:46:39 Check angles 04:46:39 SkyScan query 04:46:40 SkyScan query done: ret=0 az=64.02<-4268 ze=-68.37<-16558 Statuses=0009 0009 04:46:40 Msec=0 True Az=64.02 Ze=-68.37 Az status=0009 Ze status=0009 04:46:40 Check angles 04:46:40 SkyScan query 04:46:40 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.385<-17959 Statuses=0009 0009 04:46:40 Msec=750 True Az=81.36 Ze=-89.385 Az status=0009 Ze status=0009 04:46:41 Check angles 04:46:41 SkyScan query 04:46:41 SkyScan query done: ret=0 az=99.435<-6629 ze=-110.775<-19385 Statuses=0009 0009 04:46:41 Msec=1500 True Az=99.435 Ze=-110.775 Az status=0009 Ze status=0009 04:46:41 Check angles 04:46:41 SkyScan query 04:46:42 SkyScan query done: ret=0 az=116.94<-7796 ze=-131.67<-20778 Statuses=0009 0009 04:46:42 Msec=2250 True Az=116.94 Ze=-131.67 Az status=0009 Ze status=0009 04:46:42 Check angles 04:46:42 SkyScan query 04:46:43 SkyScan query done: ret=0 az=131.16<-8744 ze=-141.555<-21437 Statuses=0009 0008 04:46:43 Msec=3000 True Az=131.16 Ze=-141.555 Az status=0009 Ze status=0008 04:46:43 Check angles 04:46:43 SkyScan query 04:46:43 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 04:46:43 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 04:46:43 Message to Master queued w/err=0: serial=53521 error=0 04:46:48 Received message from Master: op=Filter serial=53522 04:46:48 Color wheel filter change from 0 to 0 04:46:48 FLIGetFilterPos err=0 currentPosition=0 04:46:48 FLIGetStepsRemaining err=0 RemainingSteps=0 04:46:48 Filter is already there-color wheel unchanged 04:46:49 Received message from Master: op=Shutter serial=53523 04:46:49 Shutter LASER close 04:46:49 Received message from Camera: op=State serial=53525 04:46:49 GetSingleValue result=40 Value=cccccccc 04:46:49 SkyScan query 04:46:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:46:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:49 Parameters OK 04:46:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:49 Set A/D data flow result=40 04:46:49 Set A/D channel type result=40 04:46:49 Set A/D encoding result=40 04:46:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:49 Set channel filter=0.000000e+000 result=40 04:46:49 Config A/D Result=40 04:46:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:49 Get A/D filter: -9.255963e+061 result=40 04:46:49 Get A/D value=-858993460 result=40 04:46:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:49 Parameters OK 04:46:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:49 Set A/D data flow result=40 04:46:49 Set A/D channel type result=40 04:46:49 Set A/D encoding result=40 04:46:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:49 Set channel filter=0.000000e+000 result=40 04:46:49 Config A/D Result=40 04:46:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:49 Get A/D filter: -9.255963e+061 result=40 04:46:49 Get A/D value=-858993460 result=40 04:46:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:49 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:46:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:46:49 Aux= 04:46:49 Message to Camera, serial 53525 queued 04:47:25 Received message from Master: op=PointingHead serial=53537 04:47:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:47:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:47:26 Point started: ret=0 04:47:26 point_skyscan result=0 04:47:26 Check angles 04:47:26 SkyScan query 04:47:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.48<-23432 Statuses=0009 0009 04:47:27 Msec=0 True Az=112.995 Ze=-171.48 Az status=0009 Ze status=0009 04:47:27 Check angles 04:47:27 SkyScan query 04:47:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:47:28 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:47:28 Message to Master queued w/err=0: serial=53537 error=0 04:47:33 Received message from Master: op=Filter serial=53538 04:47:33 Color wheel filter change from 0 to 0 04:47:33 FLIGetFilterPos err=0 currentPosition=0 04:47:33 FLIGetStepsRemaining err=0 RemainingSteps=0 04:47:33 Filter is already there-color wheel unchanged 04:47:33 Received message from Master: op=Shutter serial=53539 04:47:33 Shutter LASER open 04:47:33 Received message from Camera: op=State serial=53541 04:47:33 GetSingleValue result=40 Value=cccccccc 04:47:33 SkyScan query 04:47:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:47:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:34 Parameters OK 04:47:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:34 Set A/D data flow result=40 04:47:34 Set A/D channel type result=40 04:47:34 Set A/D encoding result=40 04:47:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:34 Set channel filter=0.000000e+000 result=40 04:47:34 Config A/D Result=40 04:47:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:34 Get A/D filter: -9.255963e+061 result=40 04:47:34 Get A/D value=-858993460 result=40 04:47:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:34 Parameters OK 04:47:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:34 Set A/D data flow result=40 04:47:34 Set A/D channel type result=40 04:47:34 Set A/D encoding result=40 04:47:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:34 Set channel filter=0.000000e+000 result=40 04:47:34 Config A/D Result=40 04:47:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:34 Get A/D filter: -9.255963e+061 result=40 04:47:34 Get A/D value=-858993460 result=40 04:47:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:47:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:47:34 Aux= 04:47:34 Message to Camera, serial 53541 queued 04:47:42 Received message from Master: op=Shutter serial=53551 04:47:42 Shutter LASER close 04:47:43 Received message from Master: op=PointingHead serial=53555 04:47:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:47:43 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:47:43 Point started: ret=0 04:47:43 point_skyscan result=0 04:47:44 Check angles 04:47:44 SkyScan query 04:47:44 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.83<-21522 Statuses=0009 0009 04:47:44 Msec=0 True Az=136.38 Ze=-142.83 Az status=0009 Ze status=0009 04:47:44 Check angles 04:47:44 SkyScan query 04:47:45 SkyScan query done: ret=0 az=153.855<-10257 ze=-121.86<-20124 Statuses=0009 0009 04:47:45 Msec=750 True Az=153.855 Ze=-121.86 Az status=0009 Ze status=0009 04:47:45 Check angles 04:47:45 SkyScan query 04:47:46 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.92<-18728 Statuses=0009 0009 04:47:46 Msec=1500 True Az=171.45 Ze=-100.92 Az status=0009 Ze status=0009 04:47:46 Check angles 04:47:46 SkyScan query 04:47:47 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.01<-17334 Statuses=0008 0009 04:47:47 Msec=2250 True Az=176.025 Ze=-80.01 Az status=0008 Ze status=0009 04:47:47 Check angles 04:47:47 SkyScan query 04:47:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.01<-15934 Statuses=0008 0009 04:47:47 Msec=3000 True Az=175.995 Ze=-59.01 Az status=0008 Ze status=0009 04:47:47 Check angles 04:47:47 SkyScan query 04:47:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:47:48 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:47:48 Message to Master queued w/err=0: serial=53555 error=0 04:47:53 Received message from Master: op=Filter serial=53556 04:47:53 Color wheel filter change from 0 to 0 04:47:53 FLIGetFilterPos err=0 currentPosition=0 04:47:53 FLIGetStepsRemaining err=0 RemainingSteps=0 04:47:53 Filter is already there-color wheel unchanged 04:47:53 Received message from Master: op=Shutter serial=53557 04:47:53 Shutter LASER close 04:47:53 Received message from Camera: op=State serial=53559 04:47:53 GetSingleValue result=40 Value=cccccccc 04:47:53 SkyScan query 04:47:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:47:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:54 Parameters OK 04:47:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:54 Set A/D data flow result=40 04:47:54 Set A/D channel type result=40 04:47:54 Set A/D encoding result=40 04:47:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:54 Set channel filter=0.000000e+000 result=40 04:47:54 Config A/D Result=40 04:47:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:54 Get A/D filter: -9.255963e+061 result=40 04:47:54 Get A/D value=-858993460 result=40 04:47:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:54 Parameters OK 04:47:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:54 Set A/D data flow result=40 04:47:54 Set A/D channel type result=40 04:47:54 Set A/D encoding result=40 04:47:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:54 Set channel filter=0.000000e+000 result=40 04:47:54 Config A/D Result=40 04:47:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:54 Get A/D filter: -9.255963e+061 result=40 04:47:54 Get A/D value=-858993460 result=40 04:47:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:47:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:47:54 Aux= 04:47:54 Message to Camera, serial 53559 queued 04:48:31 Received message from Master: op=PointingHead serial=53572 04:48:31 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:48:31 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:48:31 Point started: ret=0 04:48:31 point_skyscan result=0 04:48:32 Check angles 04:48:32 SkyScan query 04:48:32 SkyScan query done: ret=0 az=152.565<-10171 ze=-21.165<-13411 Statuses=0009 0009 04:48:32 Msec=0 True Az=152.565 Ze=-21.165 Az status=0009 Ze status=0009 04:48:33 Check angles 04:48:33 SkyScan query 04:48:33 SkyScan query done: ret=0 az=135.045<-9003 ze=-0.255<-12017 Statuses=0009 0009 04:48:33 Msec=750 True Az=135.045 Ze=-0.255 Az status=0009 Ze status=0009 04:48:33 Check angles 04:48:33 SkyScan query 04:48:34 SkyScan query done: ret=0 az=117.075<-7805 ze=21.165<-10589 Statuses=0009 0009 04:48:34 Msec=1500 True Az=117.075 Ze=21.165 Az status=0009 Ze status=0009 04:48:34 Check angles 04:48:34 SkyScan query 04:48:35 SkyScan query done: ret=0 az=99.81<-6654 ze=42.09<-9194 Statuses=0009 0009 04:48:35 Msec=2250 True Az=99.81 Ze=42.09 Az status=0009 Ze status=0009 04:48:35 Check angles 04:48:35 SkyScan query 04:48:35 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 04:48:35 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 04:48:36 Check angles 04:48:36 SkyScan query 04:48:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:48:36 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:48:36 Message to Master queued w/err=0: serial=53572 error=0 04:48:41 Received message from Master: op=Filter serial=53573 04:48:41 Color wheel filter change from 0 to 0 04:48:41 FLIGetFilterPos err=0 currentPosition=0 04:48:41 FLIGetStepsRemaining err=0 RemainingSteps=0 04:48:41 Filter is already there-color wheel unchanged 04:48:41 Received message from Master: op=Shutter serial=53574 04:48:41 Shutter LASER close 04:48:41 Received message from Camera: op=State serial=53576 04:48:41 GetSingleValue result=40 Value=cccccccc 04:48:41 SkyScan query 04:48:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:48:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:42 Parameters OK 04:48:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:42 Set A/D data flow result=40 04:48:42 Set A/D channel type result=40 04:48:42 Set A/D encoding result=40 04:48:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:42 Set channel filter=0.000000e+000 result=40 04:48:42 Config A/D Result=40 04:48:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:42 Get A/D filter: -9.255963e+061 result=40 04:48:42 Get A/D value=-858993460 result=40 04:48:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:42 Parameters OK 04:48:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:42 Set A/D data flow result=40 04:48:42 Set A/D channel type result=40 04:48:42 Set A/D encoding result=40 04:48:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:42 Set channel filter=0.000000e+000 result=40 04:48:42 Config A/D Result=40 04:48:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:42 Get A/D filter: -9.255963e+061 result=40 04:48:42 Get A/D value=-858993460 result=40 04:48:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:48:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:48:42 Aux= 04:48:42 Message to Camera, serial 53576 queued 04:49:19 Received message from Master: op=PointingHead serial=53589 04:49:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:49:19 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:49:19 Point started: ret=0 04:49:19 point_skyscan result=0 04:49:20 Check angles 04:49:20 SkyScan query 04:49:21 SkyScan query done: ret=0 az=109.08<-7272 ze=38.475<-9435 Statuses=0009 0008 04:49:21 Msec=0 True Az=109.08 Ze=38.475 Az status=0009 Ze status=0008 04:49:21 Check angles 04:49:21 SkyScan query 04:49:21 SkyScan query done: ret=0 az=126.72<-8448 ze=38.505<-9433 Statuses=0009 0008 04:49:21 Msec=750 True Az=126.72 Ze=38.505 Az status=0009 Ze status=0008 04:49:21 Check angles 04:49:21 SkyScan query 04:49:22 SkyScan query done: ret=0 az=144.045<-9603 ze=38.505<-9433 Statuses=0009 0008 04:49:22 Msec=1500 True Az=144.045 Ze=38.505 Az status=0009 Ze status=0008 04:49:22 Check angles 04:49:22 SkyScan query 04:49:23 SkyScan query done: ret=0 az=161.43<-10762 ze=38.505<-9433 Statuses=0009 0008 04:49:23 Msec=2250 True Az=161.43 Ze=38.505 Az status=0009 Ze status=0008 04:49:23 Check angles 04:49:23 SkyScan query 04:49:24 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 04:49:24 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 04:49:24 Check angles 04:49:24 SkyScan query 04:49:24 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:49:24 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:49:24 Message to Master queued w/err=0: serial=53589 error=0 04:49:29 Received message from Master: op=Filter serial=53590 04:49:29 Color wheel filter change from 0 to 0 04:49:29 FLIGetFilterPos err=0 currentPosition=0 04:49:29 FLIGetStepsRemaining err=0 RemainingSteps=0 04:49:29 Filter is already there-color wheel unchanged 04:49:30 Received message from Master: op=Shutter serial=53591 04:49:30 Shutter LASER close 04:49:30 Received message from Camera: op=State serial=53593 04:49:30 GetSingleValue result=40 Value=cccccccc 04:49:30 SkyScan query 04:49:30 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:49:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:30 Parameters OK 04:49:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:30 Set A/D data flow result=40 04:49:30 Set A/D channel type result=40 04:49:30 Set A/D encoding result=40 04:49:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:30 Set channel filter=0.000000e+000 result=40 04:49:30 Config A/D Result=40 04:49:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:30 Get A/D filter: -9.255963e+061 result=40 04:49:30 Get A/D value=-858993460 result=40 04:49:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:30 Parameters OK 04:49:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:30 Set A/D data flow result=40 04:49:30 Set A/D channel type result=40 04:49:30 Set A/D encoding result=40 04:49:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:30 Set channel filter=0.000000e+000 result=40 04:49:30 Config A/D Result=40 04:49:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:30 Get A/D filter: -9.255963e+061 result=40 04:49:30 Get A/D value=-858993460 result=40 04:49:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:49:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:49:30 Aux= 04:49:30 Message to Camera, serial 53593 queued 04:50:07 Received message from Master: op=PointingHead serial=53606 04:50:07 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:50:07 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:50:07 Point started: ret=0 04:50:07 point_skyscan result=0 04:50:08 Check angles 04:50:08 SkyScan query 04:50:09 SkyScan query done: ret=0 az=152.76<-10184 ze=8.46<-11436 Statuses=0009 0009 04:50:09 Msec=0 True Az=152.76 Ze=8.46 Az status=0009 Ze status=0009 04:50:09 Check angles 04:50:09 SkyScan query 04:50:09 SkyScan query done: ret=0 az=135.27<-9018 ze=-12.465<-12831 Statuses=0009 0009 04:50:09 Msec=750 True Az=135.27 Ze=-12.465 Az status=0009 Ze status=0009 04:50:10 Check angles 04:50:10 SkyScan query 04:50:10 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.405<-14227 Statuses=0009 0009 04:50:10 Msec=1500 True Az=117.57 Ze=-33.405 Az status=0009 Ze status=0009 04:50:10 Check angles 04:50:10 SkyScan query 04:50:11 SkyScan query done: ret=0 az=100.185<-6679 ze=-51.54<-15436 Statuses=0009 0009 04:50:11 Msec=2250 True Az=100.185 Ze=-51.54 Az status=0009 Ze status=0009 04:50:11 Check angles 04:50:11 SkyScan query 04:50:12 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 04:50:12 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 04:50:12 Check angles 04:50:12 SkyScan query 04:50:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:50:12 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:50:12 Message to Master queued w/err=0: serial=53606 error=0 04:50:17 Received message from Master: op=Filter serial=53607 04:50:17 Color wheel filter change from 0 to 0 04:50:17 FLIGetFilterPos err=0 currentPosition=0 04:50:17 FLIGetStepsRemaining err=0 RemainingSteps=0 04:50:17 Filter is already there-color wheel unchanged 04:50:18 Received message from Master: op=Shutter serial=53608 04:50:18 Shutter LASER close 04:50:18 Received message from Camera: op=State serial=53610 04:50:18 GetSingleValue result=40 Value=cccccccc 04:50:18 SkyScan query 04:50:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:50:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:18 Parameters OK 04:50:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:18 Set A/D data flow result=40 04:50:18 Set A/D channel type result=40 04:50:18 Set A/D encoding result=40 04:50:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:18 Set channel filter=0.000000e+000 result=40 04:50:18 Config A/D Result=40 04:50:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:18 Get A/D filter: -9.255963e+061 result=40 04:50:18 Get A/D value=-858993460 result=40 04:50:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:18 Parameters OK 04:50:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:18 Set A/D data flow result=40 04:50:18 Set A/D channel type result=40 04:50:18 Set A/D encoding result=40 04:50:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:18 Set channel filter=0.000000e+000 result=40 04:50:18 Config A/D Result=40 04:50:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:18 Get A/D filter: -9.255963e+061 result=40 04:50:18 Get A/D value=-858993460 result=40 04:50:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:50:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:50:18 Aux= 04:50:18 Message to Camera, serial 53610 queued 04:50:55 Received message from Master: op=PointingHead serial=53623 04:50:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:50:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:50:55 Point started: ret=0 04:50:55 point_skyscan result=0 04:50:56 Check angles 04:50:56 SkyScan query 04:50:57 SkyScan query done: ret=0 az=109.215<-7281 ze=-81.525<-17435 Statuses=0009 0009 04:50:57 Msec=0 True Az=109.215 Ze=-81.525 Az status=0009 Ze status=0009 04:50:57 Check angles 04:50:57 SkyScan query 04:50:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.945<-18863 Statuses=0008 0009 04:50:57 Msec=750 True Az=112.995 Ze=-102.945 Az status=0008 Ze status=0009 04:50:58 Check angles 04:50:58 SkyScan query 04:50:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.9<-20260 Statuses=0008 0009 04:50:58 Msec=1500 True Az=112.995 Ze=-123.9 Az status=0008 Ze status=0009 04:50:58 Check angles 04:50:58 SkyScan query 04:50:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.825<-21655 Statuses=0008 0009 04:50:59 Msec=2250 True Az=112.995 Ze=-144.825 Az status=0008 Ze status=0009 04:50:59 Check angles 04:50:59 SkyScan query 04:51:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.2<-23080 Statuses=0008 0009 04:51:00 Msec=3000 True Az=112.995 Ze=-166.2 Az status=0008 Ze status=0009 04:51:00 Check angles 04:51:00 SkyScan query 04:51:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:51:01 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:51:01 Message to Master queued w/err=0: serial=53623 error=0 04:51:06 Received message from Master: op=Filter serial=53624 04:51:06 Color wheel filter change from 0 to 0 04:51:06 FLIGetFilterPos err=0 currentPosition=0 04:51:06 FLIGetStepsRemaining err=0 RemainingSteps=0 04:51:06 Filter is already there-color wheel unchanged 04:51:06 Received message from Master: op=Shutter serial=53625 04:51:06 Shutter LASER open 04:51:06 Received message from Camera: op=State serial=53627 04:51:06 GetSingleValue result=40 Value=cccccccc 04:51:06 SkyScan query 04:51:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:51:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:06 Parameters OK 04:51:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:06 Set A/D data flow result=40 04:51:06 Set A/D channel type result=40 04:51:06 Set A/D encoding result=40 04:51:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:06 Set channel filter=0.000000e+000 result=40 04:51:06 Config A/D Result=40 04:51:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:06 Get A/D filter: -9.255963e+061 result=40 04:51:06 Get A/D value=-858993460 result=40 04:51:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:06 Parameters OK 04:51:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:06 Set A/D data flow result=40 04:51:06 Set A/D channel type result=40 04:51:06 Set A/D encoding result=40 04:51:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:06 Set channel filter=0.000000e+000 result=40 04:51:06 Config A/D Result=40 04:51:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:06 Get A/D filter: -9.255963e+061 result=40 04:51:06 Get A/D value=-858993460 result=40 04:51:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:51:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:51:06 Aux= 04:51:06 Message to Camera, serial 53627 queued 04:51:15 Received message from Master: op=Shutter serial=53637 04:51:15 Shutter LASER close 04:51:15 Received message from Master: op=PointingHead serial=53641 04:51:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:51:15 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:51:16 Point started: ret=0 04:51:16 point_skyscan result=0 04:51:16 Check angles 04:51:16 SkyScan query 04:51:17 SkyScan query done: ret=0 az=89.895<-5993 ze=157.335<-1511 Statuses=0009 0009 04:51:17 Msec=0 True Az=89.895 Ze=157.335 Az status=0009 Ze status=0009 04:51:17 Check angles 04:51:17 SkyScan query 04:51:18 SkyScan query done: ret=0 az=72.06<-4804 ze=135.93<-2938 Statuses=0009 0009 04:51:18 Msec=750 True Az=72.06 Ze=135.93 Az status=0009 Ze status=0009 04:51:18 Check angles 04:51:18 SkyScan query 04:51:19 SkyScan query done: ret=0 az=54.825<-3655 ze=114.99<-4334 Statuses=0009 0009 04:51:19 Msec=1500 True Az=54.825 Ze=114.99 Az status=0009 Ze status=0009 04:51:19 Check angles 04:51:19 SkyScan query 04:51:19 SkyScan query done: ret=0 az=40.935<-2729 ze=93.6<-5760 Statuses=0009 0009 04:51:19 Msec=2250 True Az=40.935 Ze=93.6 Az status=0009 Ze status=0009 04:51:19 Check angles 04:51:19 SkyScan query 04:51:20 SkyScan query done: ret=0 az=40.995<-2733 ze=72.615<-7159 Statuses=0008 0009 04:51:20 Msec=3000 True Az=40.995 Ze=72.615 Az status=0008 Ze status=0009 04:51:20 Check angles 04:51:20 SkyScan query 04:51:21 SkyScan query done: ret=0 az=40.995<-2733 ze=52.35<-8510 Statuses=0008 0009 04:51:21 Msec=3750 True Az=40.995 Ze=52.35 Az status=0008 Ze status=0009 04:51:21 Check angles 04:51:21 SkyScan query 04:51:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:51:22 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:51:22 Message to Master queued w/err=0: serial=53641 error=0 04:51:27 Received message from Master: op=Filter serial=53642 04:51:27 Color wheel filter change from 0 to 0 04:51:27 FLIGetFilterPos err=0 currentPosition=0 04:51:27 FLIGetStepsRemaining err=0 RemainingSteps=0 04:51:27 Filter is already there-color wheel unchanged 04:51:27 Received message from Master: op=Shutter serial=53643 04:51:27 Shutter LASER close 04:51:27 Received message from Camera: op=State serial=53645 04:51:27 GetSingleValue result=40 Value=cccccccc 04:51:27 SkyScan query 04:51:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:51:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:27 Parameters OK 04:51:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:27 Set A/D data flow result=40 04:51:27 Set A/D channel type result=40 04:51:27 Set A/D encoding result=40 04:51:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:27 Set channel filter=0.000000e+000 result=40 04:51:27 Config A/D Result=40 04:51:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:27 Get A/D filter: -9.255963e+061 result=40 04:51:27 Get A/D value=-858993460 result=40 04:51:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:27 Parameters OK 04:51:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:27 Set A/D data flow result=40 04:51:27 Set A/D channel type result=40 04:51:27 Set A/D encoding result=40 04:51:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:27 Set channel filter=0.000000e+000 result=40 04:51:27 Config A/D Result=40 04:51:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:27 Get A/D filter: -9.255963e+061 result=40 04:51:27 Get A/D value=-858993460 result=40 04:51:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:51:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:51:27 Aux= 04:51:27 Message to Camera, serial 53645 queued 04:52:04 Received message from Master: op=PointingHead serial=53658 04:52:04 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:52:04 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:52:05 Point started: ret=0 04:52:05 point_skyscan result=0 04:52:05 Check angles 04:52:05 SkyScan query 04:52:06 SkyScan query done: ret=0 az=63.795<-4253 ze=66.555<-7563 Statuses=0009 0008 04:52:06 Msec=0 True Az=63.795 Ze=66.555 Az status=0009 Ze status=0008 04:52:06 Check angles 04:52:06 SkyScan query 04:52:07 SkyScan query done: ret=0 az=81.21<-5414 ze=66.495<-7567 Statuses=0009 0008 04:52:07 Msec=750 True Az=81.21 Ze=66.495 Az status=0009 Ze status=0008 04:52:07 Check angles 04:52:07 SkyScan query 04:52:07 SkyScan query done: ret=0 az=99.195<-6613 ze=66.495<-7567 Statuses=0009 0008 04:52:07 Msec=1500 True Az=99.195 Ze=66.495 Az status=0009 Ze status=0008 04:52:08 Check angles 04:52:08 SkyScan query 04:52:08 SkyScan query done: ret=0 az=116.805<-7787 ze=66.495<-7567 Statuses=0009 0008 04:52:08 Msec=2250 True Az=116.805 Ze=66.495 Az status=0009 Ze status=0008 04:52:08 Check angles 04:52:08 SkyScan query 04:52:09 SkyScan query done: ret=0 az=134.265<-8951 ze=66.495<-7567 Statuses=0009 0008 04:52:09 Msec=3000 True Az=134.265 Ze=66.495 Az status=0009 Ze status=0008 04:52:09 Check angles 04:52:09 SkyScan query 04:52:10 SkyScan query done: ret=0 az=152.085<-10139 ze=66.495<-7567 Statuses=0009 0008 04:52:10 Msec=3750 True Az=152.085 Ze=66.495 Az status=0009 Ze status=0008 04:52:10 Check angles 04:52:10 SkyScan query 04:52:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:52:11 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 04:52:11 Message to Master queued w/err=0: serial=53658 error=0 04:52:16 Received message from Master: op=Filter serial=53659 04:52:16 Color wheel filter change from 0 to 0 04:52:16 FLIGetFilterPos err=0 currentPosition=0 04:52:16 FLIGetStepsRemaining err=0 RemainingSteps=0 04:52:16 Filter is already there-color wheel unchanged 04:52:16 Received message from Master: op=Shutter serial=53660 04:52:16 Shutter LASER close 04:52:16 Received message from Camera: op=State serial=53662 04:52:16 GetSingleValue result=40 Value=cccccccc 04:52:16 SkyScan query 04:52:16 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:52:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:16 Parameters OK 04:52:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:16 Set A/D data flow result=40 04:52:16 Set A/D channel type result=40 04:52:16 Set A/D encoding result=40 04:52:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:16 Set channel filter=0.000000e+000 result=40 04:52:16 Config A/D Result=40 04:52:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:16 Get A/D filter: -9.255963e+061 result=40 04:52:16 Get A/D value=-858993460 result=40 04:52:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:16 Parameters OK 04:52:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:16 Set A/D data flow result=40 04:52:16 Set A/D channel type result=40 04:52:16 Set A/D encoding result=40 04:52:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:16 Set channel filter=0.000000e+000 result=40 04:52:16 Config A/D Result=40 04:52:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:16 Get A/D filter: -9.255963e+061 result=40 04:52:16 Get A/D value=-858993460 result=40 04:52:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:16 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:52:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:52:16 Aux= 04:52:16 Message to Camera, serial 53662 queued 04:52:53 Received message from Master: op=PointingHead serial=53675 04:52:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:52:53 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:52:53 Point started: ret=0 04:52:53 point_skyscan result=0 04:52:54 Check angles 04:52:54 SkyScan query 04:52:55 SkyScan query done: ret=0 az=135.06<-9004 ze=36.72<-9552 Statuses=0009 0009 04:52:55 Msec=0 True Az=135.06 Ze=36.72 Az status=0009 Ze status=0009 04:52:55 Check angles 04:52:55 SkyScan query 04:52:56 SkyScan query done: ret=0 az=117.555<-7837 ze=15.795<-10947 Statuses=0009 0009 04:52:56 Msec=750 True Az=117.555 Ze=15.795 Az status=0009 Ze status=0009 04:52:56 Check angles 04:52:56 SkyScan query 04:52:56 SkyScan query done: ret=0 az=100.155<-6677 ze=-5.175<-12345 Statuses=0009 0009 04:52:56 Msec=1500 True Az=100.155 Ze=-5.175 Az status=0009 Ze status=0009 04:52:56 Check angles 04:52:56 SkyScan query 04:52:57 SkyScan query done: ret=0 az=82.695<-5513 ze=-26.1<-13740 Statuses=0009 0009 04:52:57 Msec=2250 True Az=82.695 Ze=-26.1 Az status=0009 Ze status=0009 04:52:57 Check angles 04:52:57 SkyScan query 04:52:58 SkyScan query done: ret=0 az=65.16<-4344 ze=-38.565<-14571 Statuses=0009 0008 04:52:58 Msec=3000 True Az=65.16 Ze=-38.565 Az status=0009 Ze status=0008 04:52:58 Check angles 04:52:58 SkyScan query 04:52:59 SkyScan query done: ret=0 az=47.745<-3183 ze=-38.535<-14569 Statuses=0009 0008 04:52:59 Msec=3750 True Az=47.745 Ze=-38.535 Az status=0009 Ze status=0008 04:52:59 Check angles 04:52:59 SkyScan query 04:52:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:52:59 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:52:59 Message to Master queued w/err=0: serial=53675 error=0 04:53:04 Received message from Master: op=Filter serial=53676 04:53:04 Color wheel filter change from 0 to 0 04:53:04 FLIGetFilterPos err=0 currentPosition=0 04:53:04 FLIGetStepsRemaining err=0 RemainingSteps=0 04:53:04 Filter is already there-color wheel unchanged 04:53:04 Received message from Master: op=Shutter serial=53677 04:53:04 Shutter LASER close 04:53:05 Received message from Camera: op=State serial=53679 04:53:05 GetSingleValue result=40 Value=cccccccc 04:53:05 SkyScan query 04:53:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:53:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:05 Parameters OK 04:53:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:05 Set A/D data flow result=40 04:53:05 Set A/D channel type result=40 04:53:05 Set A/D encoding result=40 04:53:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:05 Set channel filter=0.000000e+000 result=40 04:53:05 Config A/D Result=40 04:53:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:05 Get A/D filter: -9.255963e+061 result=40 04:53:05 Get A/D value=-858993460 result=40 04:53:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:05 Parameters OK 04:53:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:05 Set A/D data flow result=40 04:53:05 Set A/D channel type result=40 04:53:05 Set A/D encoding result=40 04:53:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:05 Set channel filter=0.000000e+000 result=40 04:53:05 Config A/D Result=40 04:53:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:05 Get A/D filter: -9.255963e+061 result=40 04:53:05 Get A/D value=-858993460 result=40 04:53:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:53:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:53:05 Aux= 04:53:05 Message to Camera, serial 53679 queued 04:53:42 Received message from Master: op=PointingHead serial=53692 04:53:42 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:53:42 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:53:42 Point started: ret=0 04:53:42 point_skyscan result=0 04:53:43 Check angles 04:53:43 SkyScan query 04:53:44 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.175<-16545 Statuses=0009 0009 04:53:44 Msec=0 True Az=63.96 Ze=-68.175 Az status=0009 Ze status=0009 04:53:44 Check angles 04:53:44 SkyScan query 04:53:44 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.16<-17944 Statuses=0009 0009 04:53:44 Msec=750 True Az=81.33 Ze=-89.16 Az status=0009 Ze status=0009 04:53:45 Check angles 04:53:45 SkyScan query 04:53:45 SkyScan query done: ret=0 az=98.955<-6597 ze=-110.085<-19339 Statuses=0009 0009 04:53:45 Msec=1500 True Az=98.955 Ze=-110.085 Az status=0009 Ze status=0009 04:53:45 Check angles 04:53:45 SkyScan query 04:53:46 SkyScan query done: ret=0 az=116.46<-7764 ze=-131.055<-20737 Statuses=0009 0009 04:53:46 Msec=2250 True Az=116.46 Ze=-131.055 Az status=0009 Ze status=0009 04:53:46 Check angles 04:53:46 SkyScan query 04:53:47 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 04:53:47 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 04:53:47 Check angles 04:53:47 SkyScan query 04:53:47 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:53:47 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:53:47 Message to Master queued w/err=0: serial=53692 error=0 04:53:52 Received message from Master: op=Filter serial=53693 04:53:52 Color wheel filter change from 0 to 0 04:53:52 FLIGetFilterPos err=0 currentPosition=0 04:53:52 FLIGetStepsRemaining err=0 RemainingSteps=0 04:53:52 Filter is already there-color wheel unchanged 04:53:53 Received message from Master: op=Shutter serial=53694 04:53:53 Shutter LASER close 04:53:53 Received message from Camera: op=State serial=53696 04:53:53 GetSingleValue result=40 Value=cccccccc 04:53:53 SkyScan query 04:53:53 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:53:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:53 Parameters OK 04:53:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:53 Set A/D data flow result=40 04:53:53 Set A/D channel type result=40 04:53:53 Set A/D encoding result=40 04:53:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:53 Set channel filter=0.000000e+000 result=40 04:53:53 Config A/D Result=40 04:53:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:53 Get A/D filter: -9.255963e+061 result=40 04:53:53 Get A/D value=-858993460 result=40 04:53:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:53 Parameters OK 04:53:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:53 Set A/D data flow result=40 04:53:53 Set A/D channel type result=40 04:53:53 Set A/D encoding result=40 04:53:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:53 Set channel filter=0.000000e+000 result=40 04:53:53 Config A/D Result=40 04:53:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:53 Get A/D filter: -9.255963e+061 result=40 04:53:53 Get A/D value=-858993460 result=40 04:53:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:53 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:53:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:53:53 Aux= 04:53:53 Message to Camera, serial 53696 queued 04:54:30 Received message from Master: op=PointingHead serial=53709 04:54:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:54:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:54:30 Point started: ret=0 04:54:30 point_skyscan result=0 04:54:31 Check angles 04:54:31 SkyScan query 04:54:32 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 04:54:32 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 04:54:32 Check angles 04:54:32 SkyScan query 04:54:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:54:32 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:54:32 Message to Master queued w/err=0: serial=53709 error=0 04:54:37 Received message from Master: op=Filter serial=53710 04:54:37 Color wheel filter change from 0 to 0 04:54:37 FLIGetFilterPos err=0 currentPosition=0 04:54:37 FLIGetStepsRemaining err=0 RemainingSteps=0 04:54:37 Filter is already there-color wheel unchanged 04:54:38 Received message from Master: op=Shutter serial=53711 04:54:38 Shutter LASER open 04:54:38 Received message from Camera: op=State serial=53713 04:54:38 GetSingleValue result=40 Value=cccccccc 04:54:38 SkyScan query 04:54:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:54:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:38 Parameters OK 04:54:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:38 Set A/D data flow result=40 04:54:38 Set A/D channel type result=40 04:54:38 Set A/D encoding result=40 04:54:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:38 Set channel filter=0.000000e+000 result=40 04:54:38 Config A/D Result=40 04:54:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:38 Get A/D filter: -9.255963e+061 result=40 04:54:38 Get A/D value=-858993460 result=40 04:54:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:38 Parameters OK 04:54:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:38 Set A/D data flow result=40 04:54:38 Set A/D channel type result=40 04:54:38 Set A/D encoding result=40 04:54:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:38 Set channel filter=0.000000e+000 result=40 04:54:38 Config A/D Result=40 04:54:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:38 Get A/D filter: -9.255963e+061 result=40 04:54:38 Get A/D value=-858993460 result=40 04:54:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:54:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:54:38 Aux= 04:54:38 Message to Camera, serial 53713 queued 04:54:47 Received message from Master: op=Shutter serial=53723 04:54:47 Shutter LASER close 04:54:47 Received message from Master: op=PointingHead serial=53727 04:54:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:54:47 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:54:48 Point started: ret=0 04:54:48 point_skyscan result=0 04:54:48 Check angles 04:54:48 SkyScan query 04:54:49 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.4<-21560 Statuses=0009 0009 04:54:49 Msec=0 True Az=135.825 Ze=-143.4 Az status=0009 Ze status=0009 04:54:49 Check angles 04:54:49 SkyScan query 04:54:50 SkyScan query done: ret=0 az=153.705<-10247 ze=-121.95<-20130 Statuses=0009 0009 04:54:50 Msec=750 True Az=153.705 Ze=-121.95 Az status=0009 Ze status=0009 04:54:50 Check angles 04:54:50 SkyScan query 04:54:51 SkyScan query done: ret=0 az=171.51<-11434 ze=-100.53<-18702 Statuses=0009 0009 04:54:51 Msec=1500 True Az=171.51 Ze=-100.53 Az status=0009 Ze status=0009 04:54:51 Check angles 04:54:51 SkyScan query 04:54:51 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.65<-17310 Statuses=0008 0009 04:54:51 Msec=2250 True Az=176.025 Ze=-79.65 Az status=0008 Ze status=0009 04:54:52 Check angles 04:54:52 SkyScan query 04:54:52 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.635<-15909 Statuses=0008 0009 04:54:52 Msec=3000 True Az=176.01 Ze=-58.635 Az status=0008 Ze status=0009 04:54:52 Check angles 04:54:52 SkyScan query 04:54:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:54:53 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:54:53 Message to Master queued w/err=0: serial=53727 error=0 04:54:58 Received message from Master: op=Filter serial=53728 04:54:58 Color wheel filter change from 0 to 0 04:54:58 FLIGetFilterPos err=0 currentPosition=0 04:54:58 FLIGetStepsRemaining err=0 RemainingSteps=0 04:54:58 Filter is already there-color wheel unchanged 04:54:58 Received message from Master: op=Shutter serial=53729 04:54:58 Shutter LASER close 04:54:58 Received message from Camera: op=State serial=53731 04:54:58 GetSingleValue result=40 Value=cccccccc 04:54:58 SkyScan query 04:54:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:54:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:59 Parameters OK 04:54:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:59 Set A/D data flow result=40 04:54:59 Set A/D channel type result=40 04:54:59 Set A/D encoding result=40 04:54:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:59 Set channel filter=0.000000e+000 result=40 04:54:59 Config A/D Result=40 04:54:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:59 Get A/D filter: -9.255963e+061 result=40 04:54:59 Get A/D value=-858993460 result=40 04:54:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:59 Parameters OK 04:54:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:59 Set A/D data flow result=40 04:54:59 Set A/D channel type result=40 04:54:59 Set A/D encoding result=40 04:54:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:59 Set channel filter=0.000000e+000 result=40 04:54:59 Config A/D Result=40 04:54:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:59 Get A/D filter: -9.255963e+061 result=40 04:54:59 Get A/D value=-858993460 result=40 04:54:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:54:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:54:59 Aux= 04:54:59 Message to Camera, serial 53731 queued 04:55:36 Received message from Master: op=PointingHead serial=53744 04:55:36 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:55:36 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:55:36 Point started: ret=0 04:55:36 point_skyscan result=0 04:55:37 Check angles 04:55:37 SkyScan query 04:55:37 SkyScan query done: ret=0 az=152.685<-10179 ze=-21.225<-13415 Statuses=0009 0009 04:55:37 Msec=0 True Az=152.685 Ze=-21.225 Az status=0009 Ze status=0009 [UTC 2018-12-11 04:55:37] 04:55:37 Check angles 04:55:38 SkyScan query 04:55:38 SkyScan query done: ret=0 az=133.245<-8883 ze=1.935<-11871 Statuses=0009 0009 04:55:38 Msec=750 True Az=133.245 Ze=1.935 Az status=0009 Ze status=0009 04:55:38 Check angles 04:55:38 SkyScan query 04:55:39 SkyScan query done: ret=0 az=117.195<-7813 ze=21.12<-10592 Statuses=0009 0009 04:55:39 Msec=1500 True Az=117.195 Ze=21.12 Az status=0009 Ze status=0009 04:55:39 Check angles 04:55:39 SkyScan query 04:55:40 SkyScan query done: ret=0 az=99.885<-6659 ze=42.075<-9195 Statuses=0009 0009 04:55:40 Msec=2250 True Az=99.885 Ze=42.075 Az status=0009 Ze status=0009 04:55:40 Check angles 04:55:40 SkyScan query 04:55:40 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 04:55:40 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 04:55:40 Check angles 04:55:40 SkyScan query 04:55:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:55:41 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:55:41 Message to Master queued w/err=0: serial=53744 error=0 04:55:46 Received message from Master: op=Filter serial=53745 04:55:46 Color wheel filter change from 0 to 0 04:55:46 FLIGetFilterPos err=0 currentPosition=0 04:55:46 FLIGetStepsRemaining err=0 RemainingSteps=0 04:55:46 Filter is already there-color wheel unchanged 04:55:46 Received message from Master: op=Shutter serial=53746 04:55:46 Shutter LASER close 04:55:46 Received message from Camera: op=State serial=53748 04:55:46 GetSingleValue result=40 Value=cccccccc 04:55:46 SkyScan query 04:55:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:55:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:47 Parameters OK 04:55:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:47 Set A/D data flow result=40 04:55:47 Set A/D channel type result=40 04:55:47 Set A/D encoding result=40 04:55:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:47 Set channel filter=0.000000e+000 result=40 04:55:47 Config A/D Result=40 04:55:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:47 Get A/D filter: -9.255963e+061 result=40 04:55:47 Get A/D value=-858993460 result=40 04:55:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:47 Parameters OK 04:55:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:47 Set A/D data flow result=40 04:55:47 Set A/D channel type result=40 04:55:47 Set A/D encoding result=40 04:55:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:47 Set channel filter=0.000000e+000 result=40 04:55:47 Config A/D Result=40 04:55:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:47 Get A/D filter: -9.255963e+061 result=40 04:55:47 Get A/D value=-858993460 result=40 04:55:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:55:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:55:47 Aux= 04:55:47 Message to Camera, serial 53748 queued [UTC 2018-12-11 04:55:54] 04:56:24 Received message from Master: op=PointingHead serial=53761 04:56:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:56:24 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:56:24 Point started: ret=0 04:56:24 point_skyscan result=0 04:56:25 Check angles 04:56:25 SkyScan query 04:56:25 SkyScan query done: ret=0 az=108.75<-7250 ze=38.49<-9434 Statuses=0009 0008 04:56:25 Msec=0 True Az=108.75 Ze=38.49 Az status=0009 Ze status=0008 04:56:26 Check angles 04:56:26 SkyScan query 04:56:26 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 04:56:26 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 04:56:26 Check angles 04:56:26 SkyScan query 04:56:27 SkyScan query done: ret=0 az=144.15<-9610 ze=38.505<-9433 Statuses=0009 0008 04:56:27 Msec=1500 True Az=144.15 Ze=38.505 Az status=0009 Ze status=0008 04:56:27 Check angles 04:56:27 SkyScan query 04:56:28 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 04:56:28 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 04:56:28 Check angles 04:56:28 SkyScan query 04:56:28 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:56:28 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:56:29 Check angles 04:56:29 SkyScan query 04:56:29 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:56:29 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:56:29 Message to Master queued w/err=0: serial=53761 error=0 04:56:34 Received message from Master: op=Filter serial=53762 04:56:34 Color wheel filter change from 0 to 0 04:56:34 FLIGetFilterPos err=0 currentPosition=0 04:56:34 FLIGetStepsRemaining err=0 RemainingSteps=0 04:56:34 Filter is already there-color wheel unchanged 04:56:34 Received message from Master: op=Shutter serial=53763 04:56:34 Shutter LASER close 04:56:34 Received message from Camera: op=State serial=53765 04:56:34 GetSingleValue result=40 Value=cccccccc 04:56:34 SkyScan query 04:56:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:56:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:35 Parameters OK 04:56:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:35 Set A/D data flow result=40 04:56:35 Set A/D channel type result=40 04:56:35 Set A/D encoding result=40 04:56:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:35 Set channel filter=0.000000e+000 result=40 04:56:35 Config A/D Result=40 04:56:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:35 Get A/D filter: -9.255963e+061 result=40 04:56:35 Get A/D value=-858993460 result=40 04:56:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:35 Parameters OK 04:56:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:35 Set A/D data flow result=40 04:56:35 Set A/D channel type result=40 04:56:35 Set A/D encoding result=40 04:56:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:35 Set channel filter=0.000000e+000 result=40 04:56:35 Config A/D Result=40 04:56:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:35 Get A/D filter: -9.255963e+061 result=40 04:56:35 Get A/D value=-858993460 result=40 04:56:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:56:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:56:35 Aux= 04:56:35 Message to Camera, serial 53765 queued 04:57:12 Received message from Master: op=PointingHead serial=53778 04:57:12 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:57:12 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:57:12 Point started: ret=0 04:57:12 point_skyscan result=0 04:57:13 Check angles 04:57:13 SkyScan query 04:57:13 SkyScan query done: ret=0 az=152.985<-10199 ze=8.73<-11418 Statuses=0009 0009 04:57:13 Msec=0 True Az=152.985 Ze=8.73 Az status=0009 Ze status=0009 04:57:14 Check angles 04:57:14 SkyScan query 04:57:14 SkyScan query done: ret=0 az=135.63<-9042 ze=-12.21<-12814 Statuses=0009 0009 04:57:14 Msec=750 True Az=135.63 Ze=-12.21 Az status=0009 Ze status=0009 04:57:14 Check angles 04:57:14 SkyScan query 04:57:15 SkyScan query done: ret=0 az=118.08<-7872 ze=-33.15<-14210 Statuses=0009 0009 04:57:15 Msec=1500 True Az=118.08 Ze=-33.15 Az status=0009 Ze status=0009 04:57:15 Check angles 04:57:15 SkyScan query 04:57:16 SkyScan query done: ret=0 az=100.5<-6700 ze=-51.525<-15435 Statuses=0009 0009 04:57:16 Msec=2250 True Az=100.5 Ze=-51.525 Az status=0009 Ze status=0009 04:57:16 Check angles 04:57:16 SkyScan query 04:57:16 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 04:57:16 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 04:57:17 Check angles 04:57:17 SkyScan query 04:57:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:57:17 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:57:17 Message to Master queued w/err=0: serial=53778 error=0 04:57:22 Received message from Master: op=Filter serial=53779 04:57:22 Color wheel filter change from 0 to 0 04:57:22 FLIGetFilterPos err=0 currentPosition=0 04:57:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:57:22 Filter is already there-color wheel unchanged 04:57:22 Received message from Master: op=Shutter serial=53780 04:57:22 Shutter LASER close 04:57:22 Received message from Camera: op=State serial=53782 04:57:22 GetSingleValue result=40 Value=cccccccc 04:57:22 SkyScan query 04:57:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:57:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:23 Parameters OK 04:57:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:23 Set A/D data flow result=40 04:57:23 Set A/D channel type result=40 04:57:23 Set A/D encoding result=40 04:57:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:23 Set channel filter=0.000000e+000 result=40 04:57:23 Config A/D Result=40 04:57:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:23 Get A/D filter: -9.255963e+061 result=40 04:57:23 Get A/D value=-858993460 result=40 04:57:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:23 Parameters OK 04:57:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:23 Set A/D data flow result=40 04:57:23 Set A/D channel type result=40 04:57:23 Set A/D encoding result=40 04:57:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:23 Set channel filter=0.000000e+000 result=40 04:57:23 Config A/D Result=40 04:57:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:23 Get A/D filter: -9.255963e+061 result=40 04:57:23 Get A/D value=-858993460 result=40 04:57:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:57:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:57:23 Aux= 04:57:23 Message to Camera, serial 53782 queued 04:58:00 Received message from Master: op=PointingHead serial=53795 04:58:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:58:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:58:00 Point started: ret=0 04:58:00 point_skyscan result=0 04:58:01 Check angles 04:58:01 SkyScan query 04:58:01 SkyScan query done: ret=0 az=109.41<-7294 ze=-81.78<-17452 Statuses=0009 0009 04:58:01 Msec=0 True Az=109.41 Ze=-81.78 Az status=0009 Ze status=0009 04:58:02 Check angles 04:58:02 SkyScan query 04:58:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.705<-18847 Statuses=0008 0009 04:58:02 Msec=750 True Az=112.995 Ze=-102.705 Az status=0008 Ze status=0009 04:58:02 Check angles 04:58:02 SkyScan query 04:58:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.675<-20245 Statuses=0008 0009 04:58:03 Msec=1500 True Az=112.995 Ze=-123.675 Az status=0008 Ze status=0009 04:58:03 Check angles 04:58:03 SkyScan query 04:58:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.05<-21670 Statuses=0008 0009 04:58:04 Msec=2250 True Az=112.995 Ze=-145.05 Az status=0008 Ze status=0009 04:58:04 Check angles 04:58:04 SkyScan query 04:58:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.96<-23064 Statuses=0008 0009 04:58:04 Msec=3000 True Az=112.995 Ze=-165.96 Az status=0008 Ze status=0009 04:58:05 Check angles 04:58:05 SkyScan query 04:58:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:58:05 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:58:05 Message to Master queued w/err=0: serial=53795 error=0 04:58:10 Received message from Master: op=Filter serial=53796 04:58:10 Color wheel filter change from 0 to 0 04:58:10 FLIGetFilterPos err=0 currentPosition=0 04:58:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:58:10 Filter is already there-color wheel unchanged 04:58:10 Received message from Master: op=Shutter serial=53797 04:58:10 Shutter LASER open 04:58:11 Received message from Camera: op=State serial=53799 04:58:11 GetSingleValue result=40 Value=cccccccc 04:58:11 SkyScan query 04:58:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:58:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:11 Parameters OK 04:58:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:11 Set A/D data flow result=40 04:58:11 Set A/D channel type result=40 04:58:11 Set A/D encoding result=40 04:58:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:11 Set channel filter=0.000000e+000 result=40 04:58:11 Config A/D Result=40 04:58:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:11 Get A/D filter: -9.255963e+061 result=40 04:58:11 Get A/D value=-858993460 result=40 04:58:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:11 Parameters OK 04:58:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:11 Set A/D data flow result=40 04:58:11 Set A/D channel type result=40 04:58:11 Set A/D encoding result=40 04:58:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:11 Set channel filter=0.000000e+000 result=40 04:58:11 Config A/D Result=40 04:58:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:11 Get A/D filter: -9.255963e+061 result=40 04:58:11 Get A/D value=-858993460 result=40 04:58:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:58:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:58:11 Aux= 04:58:11 Message to Camera, serial 53799 queued 04:58:20 Received message from Master: op=Shutter serial=53809 04:58:20 Shutter LASER close 04:58:20 Received message from Master: op=PointingHead serial=53813 04:58:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:58:20 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:58:20 Point started: ret=0 04:58:20 point_skyscan result=0 04:58:21 Check angles 04:58:21 SkyScan query 04:58:22 SkyScan query done: ret=0 az=89.595<-5973 ze=156.855<-1543 Statuses=0009 0009 04:58:22 Msec=0 True Az=89.595 Ze=156.855 Az status=0009 Ze status=0009 04:58:22 Check angles 04:58:22 SkyScan query 04:58:22 SkyScan query done: ret=0 az=71.58<-4772 ze=135.495<-2967 Statuses=0009 0009 04:58:22 Msec=750 True Az=71.58 Ze=135.495 Az status=0009 Ze status=0009 04:58:23 Check angles 04:58:23 SkyScan query 04:58:23 SkyScan query done: ret=0 az=54.435<-3629 ze=114.48<-4368 Statuses=0009 0009 04:58:23 Msec=1500 True Az=54.435 Ze=114.48 Az status=0009 Ze status=0009 04:58:23 Check angles 04:58:23 SkyScan query 04:58:24 SkyScan query done: ret=0 az=40.995<-2733 ze=93.135<-5791 Statuses=0009 0009 04:58:24 Msec=2250 True Az=40.995 Ze=93.135 Az status=0009 Ze status=0009 04:58:24 Check angles 04:58:24 SkyScan query 04:58:25 SkyScan query done: ret=0 az=40.995<-2733 ze=71.745<-7217 Statuses=0008 0009 04:58:25 Msec=3000 True Az=40.995 Ze=71.745 Az status=0008 Ze status=0009 04:58:25 Check angles 04:58:25 SkyScan query 04:58:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.81<-8546 Statuses=0008 0009 04:58:26 Msec=3750 True Az=40.995 Ze=51.81 Az status=0008 Ze status=0009 04:58:26 Check angles 04:58:26 SkyScan query 04:58:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:58:26 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:58:26 Message to Master queued w/err=0: serial=53813 error=0 04:58:31 Received message from Master: op=Filter serial=53814 04:58:31 Color wheel filter change from 0 to 0 04:58:31 FLIGetFilterPos err=0 currentPosition=0 04:58:31 FLIGetStepsRemaining err=0 RemainingSteps=0 04:58:31 Filter is already there-color wheel unchanged 04:58:31 Received message from Master: op=Shutter serial=53815 04:58:31 Shutter LASER close 04:58:32 Received message from Camera: op=State serial=53817 04:58:32 GetSingleValue result=40 Value=cccccccc 04:58:32 SkyScan query 04:58:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:58:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:32 Parameters OK 04:58:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:32 Set A/D data flow result=40 04:58:32 Set A/D channel type result=40 04:58:32 Set A/D encoding result=40 04:58:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:32 Set channel filter=0.000000e+000 result=40 04:58:32 Config A/D Result=40 04:58:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:32 Get A/D filter: -9.255963e+061 result=40 04:58:32 Get A/D value=-858993460 result=40 04:58:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:32 Parameters OK 04:58:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:32 Set A/D data flow result=40 04:58:32 Set A/D channel type result=40 04:58:32 Set A/D encoding result=40 04:58:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:32 Set channel filter=0.000000e+000 result=40 04:58:32 Config A/D Result=40 04:58:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:32 Get A/D filter: -9.255963e+061 result=40 04:58:32 Get A/D value=-858993460 result=40 04:58:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:58:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:58:32 Aux= 04:58:32 Message to Camera, serial 53817 queued 04:59:08 Received message from Master: op=PointingHead serial=53829 04:59:08 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:59:08 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:59:08 Point started: ret=0 04:59:08 point_skyscan result=0 04:59:09 Check angles 04:59:09 SkyScan query 04:59:10 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 04:59:10 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 04:59:10 Check angles 04:59:10 SkyScan query 04:59:11 SkyScan query done: ret=0 az=81.69<-5446 ze=66.51<-7566 Statuses=0009 0008 04:59:11 Msec=750 True Az=81.69 Ze=66.51 Az status=0009 Ze status=0008 04:59:11 Check angles 04:59:11 SkyScan query 04:59:11 SkyScan query done: ret=0 az=99.24<-6616 ze=66.495<-7567 Statuses=0009 0008 04:59:11 Msec=1500 True Az=99.24 Ze=66.495 Az status=0009 Ze status=0008 04:59:11 Check angles 04:59:11 SkyScan query 04:59:12 SkyScan query done: ret=0 az=116.82<-7788 ze=66.495<-7567 Statuses=0009 0008 04:59:12 Msec=2250 True Az=116.82 Ze=66.495 Az status=0009 Ze status=0008 04:59:12 Check angles 04:59:12 SkyScan query 04:59:13 SkyScan query done: ret=0 az=134.31<-8954 ze=66.495<-7567 Statuses=0009 0008 04:59:13 Msec=3000 True Az=134.31 Ze=66.495 Az status=0009 Ze status=0008 04:59:13 Check angles 04:59:13 SkyScan query 04:59:14 SkyScan query done: ret=0 az=151.68<-10112 ze=66.495<-7567 Statuses=0009 0008 04:59:14 Msec=3750 True Az=151.68 Ze=66.495 Az status=0009 Ze status=0008 04:59:14 Check angles 04:59:14 SkyScan query 04:59:14 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:59:14 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 04:59:14 Message to Master queued w/err=0: serial=53829 error=0 04:59:19 Received message from Master: op=Filter serial=53830 04:59:19 Color wheel filter change from 0 to 0 04:59:19 FLIGetFilterPos err=0 currentPosition=0 04:59:19 FLIGetStepsRemaining err=0 RemainingSteps=0 04:59:19 Filter is already there-color wheel unchanged 04:59:19 Received message from Master: op=Shutter serial=53831 04:59:19 Shutter LASER close 04:59:20 Received message from Camera: op=State serial=53833 04:59:20 GetSingleValue result=40 Value=cccccccc 04:59:20 SkyScan query 04:59:20 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:59:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:20 Parameters OK 04:59:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:20 Set A/D data flow result=40 04:59:20 Set A/D channel type result=40 04:59:20 Set A/D encoding result=40 04:59:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:20 Set channel filter=0.000000e+000 result=40 04:59:20 Config A/D Result=40 04:59:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:20 Get A/D filter: -9.255963e+061 result=40 04:59:20 Get A/D value=-858993460 result=40 04:59:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:20 Parameters OK 04:59:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:20 Set A/D data flow result=40 04:59:20 Set A/D channel type result=40 04:59:20 Set A/D encoding result=40 04:59:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:20 Set channel filter=0.000000e+000 result=40 04:59:20 Config A/D Result=40 04:59:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:20 Get A/D filter: -9.255963e+061 result=40 04:59:20 Get A/D value=-858993460 result=40 04:59:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:20 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:59:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:59:20 Aux= 04:59:20 Message to Camera, serial 53833 queued 04:59:57 Received message from Master: op=PointingHead serial=53846 04:59:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:59:57 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:59:57 Point started: ret=0 04:59:57 point_skyscan result=0 04:59:58 Check angles 04:59:58 SkyScan query 04:59:59 SkyScan query done: ret=0 az=134.79<-8986 ze=36.6<-9560 Statuses=0009 0009 04:59:59 Msec=0 True Az=134.79 Ze=36.6 Az status=0009 Ze status=0009 04:59:59 Check angles 04:59:59 SkyScan query 04:59:59 SkyScan query done: ret=0 az=116.94<-7796 ze=15.24<-10984 Statuses=0009 0009 04:59:59 Msec=750 True Az=116.94 Ze=15.24 Az status=0009 Ze status=0009 05:00:00 Check angles 05:00:00 SkyScan query 05:00:00 SkyScan query done: ret=0 az=99.54<-6636 ze=-5.73<-12382 Statuses=0009 0009 05:00:00 Msec=1500 True Az=99.54 Ze=-5.73 Az status=0009 Ze status=0009 05:00:00 Check angles 05:00:00 SkyScan query 05:00:01 SkyScan query done: ret=0 az=82.08<-5472 ze=-26.67<-13778 Statuses=0009 0009 05:00:01 Msec=2250 True Az=82.08 Ze=-26.67 Az status=0009 Ze status=0009 05:00:01 Check angles 05:00:01 SkyScan query 05:00:02 SkyScan query done: ret=0 az=64.14<-4276 ze=-38.565<-14571 Statuses=0009 0008 05:00:02 Msec=3000 True Az=64.14 Ze=-38.565 Az status=0009 Ze status=0008 05:00:02 Check angles 05:00:02 SkyScan query 05:00:02 SkyScan query done: ret=0 az=46.44<-3096 ze=-38.52<-14568 Statuses=0009 0008 05:00:02 Msec=3750 True Az=46.44 Ze=-38.52 Az status=0009 Ze status=0008 05:00:03 Check angles 05:00:03 SkyScan query 05:00:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:00:03 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:00:03 Message to Master queued w/err=0: serial=53846 error=0 05:00:08 Received message from Master: op=Filter serial=53847 05:00:08 Color wheel filter change from 0 to 0 05:00:08 FLIGetFilterPos err=0 currentPosition=0 05:00:08 FLIGetStepsRemaining err=0 RemainingSteps=0 05:00:08 Filter is already there-color wheel unchanged 05:00:08 Received message from Master: op=Shutter serial=53848 05:00:08 Shutter LASER close 05:00:08 Received message from Camera: op=State serial=53850 05:00:08 GetSingleValue result=40 Value=cccccccc 05:00:08 SkyScan query 05:00:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:00:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:09 Parameters OK 05:00:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:09 Set A/D data flow result=40 05:00:09 Set A/D channel type result=40 05:00:09 Set A/D encoding result=40 05:00:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:09 Set channel filter=0.000000e+000 result=40 05:00:09 Config A/D Result=40 05:00:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:09 Get A/D filter: -9.255963e+061 result=40 05:00:09 Get A/D value=-858993460 result=40 05:00:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:09 Parameters OK 05:00:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:09 Set A/D data flow result=40 05:00:09 Set A/D channel type result=40 05:00:09 Set A/D encoding result=40 05:00:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:09 Set channel filter=0.000000e+000 result=40 05:00:09 Config A/D Result=40 05:00:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:09 Get A/D filter: -9.255963e+061 result=40 05:00:09 Get A/D value=-858993460 result=40 05:00:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:00:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:00:09 Aux= 05:00:09 Message to Camera, serial 53850 queued 05:00:46 Received message from Master: op=PointingHead serial=53863 05:00:46 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:00:46 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:00:46 Point started: ret=0 05:00:46 point_skyscan result=0 05:00:47 Check angles 05:00:47 SkyScan query 05:00:47 SkyScan query done: ret=0 az=64.44<-4296 ze=-68.775<-16585 Statuses=0009 0009 05:00:47 Msec=0 True Az=64.44 Ze=-68.775 Az status=0009 Ze status=0009 05:00:48 Check angles 05:00:48 SkyScan query 05:00:48 SkyScan query done: ret=0 az=81.75<-5450 ze=-89.745<-17983 Statuses=0009 0009 05:00:48 Msec=750 True Az=81.75 Ze=-89.745 Az status=0009 Ze status=0009 05:00:48 Check angles 05:00:48 SkyScan query 05:00:49 SkyScan query done: ret=0 az=99.825<-6655 ze=-111.135<-19409 Statuses=0009 0009 05:00:49 Msec=1500 True Az=99.825 Ze=-111.135 Az status=0009 Ze status=0009 05:00:49 Check angles 05:00:49 SkyScan query 05:00:50 SkyScan query done: ret=0 az=117.33<-7822 ze=-132.045<-20803 Statuses=0009 0009 05:00:50 Msec=2250 True Az=117.33 Ze=-132.045 Az status=0009 Ze status=0009 05:00:50 Check angles 05:00:50 SkyScan query 05:00:50 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 05:00:50 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 05:00:51 Check angles 05:00:51 SkyScan query 05:00:51 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:00:51 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:00:51 Message to Master queued w/err=0: serial=53863 error=0 05:00:56 Received message from Master: op=Filter serial=53864 05:00:56 Color wheel filter change from 0 to 0 05:00:56 FLIGetFilterPos err=0 currentPosition=0 05:00:56 FLIGetStepsRemaining err=0 RemainingSteps=0 05:00:56 Filter is already there-color wheel unchanged 05:00:56 Received message from Master: op=Shutter serial=53865 05:00:56 Shutter LASER close 05:00:56 Received message from Camera: op=State serial=53867 05:00:56 GetSingleValue result=40 Value=cccccccc 05:00:56 SkyScan query 05:00:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:00:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:57 Parameters OK 05:00:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:57 Set A/D data flow result=40 05:00:57 Set A/D channel type result=40 05:00:57 Set A/D encoding result=40 05:00:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:57 Set channel filter=0.000000e+000 result=40 05:00:57 Config A/D Result=40 05:00:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:57 Get A/D filter: -9.255963e+061 result=40 05:00:57 Get A/D value=-858993460 result=40 05:00:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:57 Parameters OK 05:00:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:57 Set A/D data flow result=40 05:00:57 Set A/D channel type result=40 05:00:57 Set A/D encoding result=40 05:00:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:57 Set channel filter=0.000000e+000 result=40 05:00:57 Config A/D Result=40 05:00:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:57 Get A/D filter: -9.255963e+061 result=40 05:00:57 Get A/D value=-858993460 result=40 05:00:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:57 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:00:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:00:57 Aux= 05:00:57 Message to Camera, serial 53867 queued 05:01:34 Received message from Master: op=PointingHead serial=53880 05:01:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:01:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:01:34 Point started: ret=0 05:01:34 point_skyscan result=0 05:01:35 Check angles 05:01:35 SkyScan query 05:01:36 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 05:01:36 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 05:01:36 Check angles 05:01:36 SkyScan query 05:01:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:01:36 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:01:36 Message to Master queued w/err=0: serial=53880 error=0 05:01:41 Received message from Master: op=Filter serial=53881 05:01:41 Color wheel filter change from 0 to 0 05:01:41 FLIGetFilterPos err=0 currentPosition=0 05:01:41 FLIGetStepsRemaining err=0 RemainingSteps=0 05:01:41 Filter is already there-color wheel unchanged 05:01:41 Received message from Master: op=Shutter serial=53882 05:01:41 Shutter LASER open 05:01:42 Received message from Camera: op=State serial=53884 05:01:42 GetSingleValue result=40 Value=cccccccc 05:01:42 SkyScan query 05:01:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:01:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:42 Parameters OK 05:01:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:42 Set A/D data flow result=40 05:01:42 Set A/D channel type result=40 05:01:42 Set A/D encoding result=40 05:01:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:42 Set channel filter=0.000000e+000 result=40 05:01:42 Config A/D Result=40 05:01:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:42 Get A/D filter: -9.255963e+061 result=40 05:01:42 Get A/D value=-858993460 result=40 05:01:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:42 Parameters OK 05:01:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:42 Set A/D data flow result=40 05:01:42 Set A/D channel type result=40 05:01:42 Set A/D encoding result=40 05:01:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:42 Set channel filter=0.000000e+000 result=40 05:01:42 Config A/D Result=40 05:01:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:42 Get A/D filter: -9.255963e+061 result=40 05:01:42 Get A/D value=-858993460 result=40 05:01:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:01:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:01:42 Aux= 05:01:42 Message to Camera, serial 53884 queued 05:01:51 Received message from Master: op=Shutter serial=53894 05:01:51 Shutter LASER close 05:01:51 Received message from Master: op=PointingHead serial=53898 05:01:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:01:51 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:01:52 Point started: ret=0 05:01:52 point_skyscan result=0 05:01:52 Check angles 05:01:52 SkyScan query 05:01:53 SkyScan query done: ret=0 az=135.795<-9053 ze=-143.355<-21557 Statuses=0009 0009 05:01:53 Msec=0 True Az=135.795 Ze=-143.355 Az status=0009 Ze status=0009 05:01:53 Check angles 05:01:53 SkyScan query 05:01:54 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.935<-20129 Statuses=0009 0009 05:01:54 Msec=750 True Az=153.75 Ze=-121.935 Az status=0009 Ze status=0009 05:01:54 Check angles 05:01:54 SkyScan query 05:01:54 SkyScan query done: ret=0 az=171.195<-11413 ze=-101.01<-18734 Statuses=0009 0009 05:01:54 Msec=1500 True Az=171.195 Ze=-101.01 Az status=0009 Ze status=0009 05:01:55 Check angles 05:01:55 SkyScan query 05:01:55 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.07<-17338 Statuses=0008 0009 05:01:55 Msec=2250 True Az=176.025 Ze=-80.07 Az status=0008 Ze status=0009 05:01:55 Check angles 05:01:55 SkyScan query 05:01:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.1<-15940 Statuses=0008 0009 05:01:56 Msec=3000 True Az=175.995 Ze=-59.1 Az status=0008 Ze status=0009 05:01:56 Check angles 05:01:56 SkyScan query 05:01:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:01:57 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:01:57 Message to Master queued w/err=0: serial=53898 error=0 05:02:02 Received message from Master: op=Filter serial=53899 05:02:02 Color wheel filter change from 0 to 0 05:02:02 FLIGetFilterPos err=0 currentPosition=0 05:02:02 FLIGetStepsRemaining err=0 RemainingSteps=0 05:02:02 Filter is already there-color wheel unchanged 05:02:02 Received message from Master: op=Shutter serial=53900 05:02:02 Shutter LASER close 05:02:02 Received message from Camera: op=State serial=53902 05:02:02 GetSingleValue result=40 Value=cccccccc 05:02:02 SkyScan query 05:02:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:02:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:03 Parameters OK 05:02:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:03 Set A/D data flow result=40 05:02:03 Set A/D channel type result=40 05:02:03 Set A/D encoding result=40 05:02:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:03 Set channel filter=0.000000e+000 result=40 05:02:03 Config A/D Result=40 05:02:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:03 Get A/D filter: -9.255963e+061 result=40 05:02:03 Get A/D value=-858993460 result=40 05:02:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:03 Parameters OK 05:02:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:03 Set A/D data flow result=40 05:02:03 Set A/D channel type result=40 05:02:03 Set A/D encoding result=40 05:02:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:03 Set channel filter=0.000000e+000 result=40 05:02:03 Config A/D Result=40 05:02:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:03 Get A/D filter: -9.255963e+061 result=40 05:02:03 Get A/D value=-858993460 result=40 05:02:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:02:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:02:03 Aux= 05:02:03 Message to Camera, serial 53902 queued 05:02:39 Received message from Master: op=PointingHead serial=53915 05:02:39 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:02:39 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:02:40 Point started: ret=0 05:02:40 point_skyscan result=0 05:02:41 Check angles 05:02:41 SkyScan query 05:02:41 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.78<-13452 Statuses=0009 0009 05:02:41 Msec=0 True Az=152.985 Ze=-21.78 Az status=0009 Ze status=0009 05:02:41 Check angles 05:02:41 SkyScan query 05:02:42 SkyScan query done: ret=0 az=135.21<-9014 ze=-0.33<-12022 Statuses=0009 0009 05:02:42 Msec=750 True Az=135.21 Ze=-0.33 Az status=0009 Ze status=0009 05:02:42 Check angles 05:02:42 SkyScan query 05:02:43 SkyScan query done: ret=0 az=117.525<-7835 ze=20.595<-10627 Statuses=0009 0009 05:02:43 Msec=1500 True Az=117.525 Ze=20.595 Az status=0009 Ze status=0009 05:02:43 Check angles 05:02:43 SkyScan query 05:02:43 SkyScan query done: ret=0 az=100.155<-6677 ze=41.595<-9227 Statuses=0009 0009 05:02:43 Msec=2250 True Az=100.155 Ze=41.595 Az status=0009 Ze status=0009 05:02:44 Check angles 05:02:44 SkyScan query 05:02:44 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 05:02:44 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 05:02:44 Check angles 05:02:44 SkyScan query 05:02:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:02:45 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:02:45 Message to Master queued w/err=0: serial=53915 error=0 05:02:50 Received message from Master: op=Filter serial=53916 05:02:50 Color wheel filter change from 0 to 0 05:02:50 FLIGetFilterPos err=0 currentPosition=0 05:02:50 FLIGetStepsRemaining err=0 RemainingSteps=0 05:02:50 Filter is already there-color wheel unchanged 05:02:50 Received message from Master: op=Shutter serial=53917 05:02:50 Shutter LASER close 05:02:50 Received message from Camera: op=State serial=53919 05:02:50 GetSingleValue result=40 Value=cccccccc 05:02:50 SkyScan query 05:02:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:02:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:51 Parameters OK 05:02:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:51 Set A/D data flow result=40 05:02:51 Set A/D channel type result=40 05:02:51 Set A/D encoding result=40 05:02:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:51 Set channel filter=0.000000e+000 result=40 05:02:51 Config A/D Result=40 05:02:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:51 Get A/D filter: -9.255963e+061 result=40 05:02:51 Get A/D value=-858993460 result=40 05:02:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:51 Parameters OK 05:02:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:51 Set A/D data flow result=40 05:02:51 Set A/D channel type result=40 05:02:51 Set A/D encoding result=40 05:02:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:51 Set channel filter=0.000000e+000 result=40 05:02:51 Config A/D Result=40 05:02:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:51 Get A/D filter: -9.255963e+061 result=40 05:02:51 Get A/D value=-858993460 result=40 05:02:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:02:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:02:51 Aux= 05:02:51 Message to Camera, serial 53919 queued 05:03:27 Received message from Master: op=PointingHead serial=53931 05:03:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:03:27 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:03:27 Point started: ret=0 05:03:27 point_skyscan result=0 05:03:28 Check angles 05:03:28 SkyScan query 05:03:28 SkyScan query done: ret=0 az=109.005<-7267 ze=38.49<-9434 Statuses=0009 0008 05:03:28 Msec=0 True Az=109.005 Ze=38.49 Az status=0009 Ze status=0008 05:03:28 Check angles 05:03:28 SkyScan query 05:03:29 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 05:03:29 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 05:03:29 Check angles 05:03:29 SkyScan query 05:03:30 SkyScan query done: ret=0 az=144.075<-9605 ze=38.505<-9433 Statuses=0009 0008 05:03:30 Msec=1500 True Az=144.075 Ze=38.505 Az status=0009 Ze status=0008 05:03:30 Check angles 05:03:30 SkyScan query 05:03:30 SkyScan query done: ret=0 az=161.805<-10787 ze=38.505<-9433 Statuses=0009 0008 05:03:30 Msec=2250 True Az=161.805 Ze=38.505 Az status=0009 Ze status=0008 05:03:31 Check angles 05:03:31 SkyScan query 05:03:31 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 05:03:31 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 05:03:31 Check angles 05:03:31 SkyScan query 05:03:32 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:03:32 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:03:32 Message to Master queued w/err=0: serial=53931 error=0 05:03:37 Received message from Master: op=Filter serial=53932 05:03:37 Color wheel filter change from 0 to 0 05:03:37 FLIGetFilterPos err=0 currentPosition=0 05:03:37 FLIGetStepsRemaining err=0 RemainingSteps=0 05:03:37 Filter is already there-color wheel unchanged 05:03:37 Received message from Master: op=Shutter serial=53933 05:03:37 Shutter LASER close 05:03:37 Received message from Camera: op=State serial=53935 05:03:37 GetSingleValue result=40 Value=cccccccc 05:03:37 SkyScan query 05:03:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:03:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:38 Parameters OK 05:03:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:38 Set A/D data flow result=40 05:03:38 Set A/D channel type result=40 05:03:38 Set A/D encoding result=40 05:03:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:38 Set channel filter=0.000000e+000 result=40 05:03:38 Config A/D Result=40 05:03:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:38 Get A/D filter: -9.255963e+061 result=40 05:03:38 Get A/D value=-858993460 result=40 05:03:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:38 Parameters OK 05:03:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:38 Set A/D data flow result=40 05:03:38 Set A/D channel type result=40 05:03:38 Set A/D encoding result=40 05:03:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:38 Set channel filter=0.000000e+000 result=40 05:03:38 Config A/D Result=40 05:03:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:38 Get A/D filter: -9.255963e+061 result=40 05:03:38 Get A/D value=-858993460 result=40 05:03:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:03:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:03:38 Aux= 05:03:38 Message to Camera, serial 53935 queued 05:04:15 Received message from Master: op=PointingHead serial=53948 05:04:15 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:04:15 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:04:15 Point started: ret=0 05:04:15 point_skyscan result=0 05:04:16 Check angles 05:04:16 SkyScan query 05:04:16 SkyScan query done: ret=0 az=152.94<-10196 ze=8.55<-11430 Statuses=0009 0009 05:04:16 Msec=0 True Az=152.94 Ze=8.55 Az status=0009 Ze status=0009 05:04:17 Check angles 05:04:17 SkyScan query 05:04:17 SkyScan query done: ret=0 az=135.48<-9032 ze=-12.36<-12824 Statuses=0009 0009 05:04:17 Msec=750 True Az=135.48 Ze=-12.36 Az status=0009 Ze status=0009 05:04:17 Check angles 05:04:17 SkyScan query 05:04:18 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.285<-14219 Statuses=0009 0009 05:04:18 Msec=1500 True Az=117.78 Ze=-33.285 Az status=0009 Ze status=0009 05:04:18 Check angles 05:04:18 SkyScan query 05:04:19 SkyScan query done: ret=0 az=100.185<-6679 ze=-51.555<-15437 Statuses=0009 0009 05:04:19 Msec=2250 True Az=100.185 Ze=-51.555 Az status=0009 Ze status=0009 05:04:19 Check angles 05:04:19 SkyScan query 05:04:19 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 05:04:19 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 05:04:20 Check angles 05:04:20 SkyScan query 05:04:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:04:20 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:04:20 Message to Master queued w/err=0: serial=53948 error=0 05:04:25 Received message from Master: op=Filter serial=53949 05:04:25 Color wheel filter change from 0 to 0 05:04:25 FLIGetFilterPos err=0 currentPosition=0 05:04:25 FLIGetStepsRemaining err=0 RemainingSteps=0 05:04:25 Filter is already there-color wheel unchanged 05:04:25 Received message from Master: op=Shutter serial=53950 05:04:25 Shutter LASER close 05:04:25 Received message from Camera: op=State serial=53952 05:04:25 GetSingleValue result=40 Value=cccccccc 05:04:25 SkyScan query 05:04:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:04:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:26 Parameters OK 05:04:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:26 Set A/D data flow result=40 05:04:26 Set A/D channel type result=40 05:04:26 Set A/D encoding result=40 05:04:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:26 Set channel filter=0.000000e+000 result=40 05:04:26 Config A/D Result=40 05:04:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:26 Get A/D filter: -9.255963e+061 result=40 05:04:26 Get A/D value=-858993460 result=40 05:04:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:26 Parameters OK 05:04:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:26 Set A/D data flow result=40 05:04:26 Set A/D channel type result=40 05:04:26 Set A/D encoding result=40 05:04:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:26 Set channel filter=0.000000e+000 result=40 05:04:26 Config A/D Result=40 05:04:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:26 Get A/D filter: -9.255963e+061 result=40 05:04:26 Get A/D value=-858993460 result=40 05:04:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:04:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:04:26 Aux= 05:04:26 Message to Camera, serial 53952 queued 05:05:03 Received message from Master: op=PointingHead serial=53965 05:05:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:05:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:05:03 Point started: ret=0 05:05:03 point_skyscan result=0 05:05:04 Check angles 05:05:04 SkyScan query 05:05:04 SkyScan query done: ret=0 az=109.035<-7269 ze=-81.345<-17423 Statuses=0009 0009 05:05:04 Msec=0 True Az=109.035 Ze=-81.345 Az status=0009 Ze status=0009 05:05:05 Check angles 05:05:05 SkyScan query 05:05:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.285<-18819 Statuses=0008 0009 05:05:05 Msec=750 True Az=112.995 Ze=-102.285 Az status=0008 Ze status=0009 05:05:05 Check angles 05:05:05 SkyScan query 05:05:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.255<-20217 Statuses=0008 0009 05:05:06 Msec=1500 True Az=112.995 Ze=-123.255 Az status=0008 Ze status=0009 05:05:06 Check angles 05:05:06 SkyScan query 05:05:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.63<-21642 Statuses=0008 0009 05:05:07 Msec=2250 True Az=112.995 Ze=-144.63 Az status=0008 Ze status=0009 05:05:07 Check angles 05:05:07 SkyScan query 05:05:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.6<-23040 Statuses=0008 0009 05:05:07 Msec=3000 True Az=112.995 Ze=-165.6 Az status=0008 Ze status=0009 05:05:08 Check angles 05:05:08 SkyScan query 05:05:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:05:08 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:05:08 Message to Master queued w/err=0: serial=53965 error=0 05:05:13 Received message from Master: op=Filter serial=53966 05:05:13 Color wheel filter change from 0 to 0 05:05:13 FLIGetFilterPos err=0 currentPosition=0 05:05:13 FLIGetStepsRemaining err=0 RemainingSteps=0 05:05:13 Filter is already there-color wheel unchanged 05:05:13 Received message from Master: op=Shutter serial=53967 05:05:13 Shutter LASER open 05:05:14 Received message from Camera: op=State serial=53969 05:05:14 GetSingleValue result=40 Value=cccccccc 05:05:14 SkyScan query 05:05:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:05:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:14 Parameters OK 05:05:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:14 Set A/D data flow result=40 05:05:14 Set A/D channel type result=40 05:05:14 Set A/D encoding result=40 05:05:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:14 Set channel filter=0.000000e+000 result=40 05:05:14 Config A/D Result=40 05:05:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:14 Get A/D filter: -9.255963e+061 result=40 05:05:14 Get A/D value=-858993460 result=40 05:05:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:14 Parameters OK 05:05:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:14 Set A/D data flow result=40 05:05:14 Set A/D channel type result=40 05:05:14 Set A/D encoding result=40 05:05:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:14 Set channel filter=0.000000e+000 result=40 05:05:14 Config A/D Result=40 05:05:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:14 Get A/D filter: -9.255963e+061 result=40 05:05:14 Get A/D value=-858993460 result=40 05:05:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:05:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:05:14 Aux= 05:05:14 Message to Camera, serial 53969 queued 05:05:23 Received message from Master: op=Shutter serial=53979 05:05:23 Shutter LASER close 05:05:23 Received message from Master: op=PointingHead serial=53983 05:05:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:05:23 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:05:23 Point started: ret=0 05:05:23 point_skyscan result=0 05:05:24 Check angles 05:05:24 SkyScan query 05:05:25 SkyScan query done: ret=0 az=89.49<-5966 ze=156.675<-1555 Statuses=0009 0009 05:05:25 Msec=0 True Az=89.49 Ze=156.675 Az status=0009 Ze status=0009 05:05:25 Check angles 05:05:25 SkyScan query 05:05:25 SkyScan query done: ret=0 az=71.97<-4798 ze=135.735<-2951 Statuses=0009 0009 05:05:25 Msec=750 True Az=71.97 Ze=135.735 Az status=0009 Ze status=0009 05:05:26 Check angles 05:05:26 SkyScan query 05:05:26 SkyScan query done: ret=0 az=54.765<-3651 ze=114.765<-4349 Statuses=0009 0009 05:05:26 Msec=1500 True Az=54.765 Ze=114.765 Az status=0009 Ze status=0009 05:05:26 Check angles 05:05:26 SkyScan query 05:05:27 SkyScan query done: ret=0 az=40.905<-2727 ze=93.825<-5745 Statuses=0009 0009 05:05:27 Msec=2250 True Az=40.905 Ze=93.825 Az status=0009 Ze status=0009 05:05:27 Check angles 05:05:27 SkyScan query 05:05:28 SkyScan query done: ret=0 az=40.995<-2733 ze=72.855<-7143 Statuses=0008 0009 05:05:28 Msec=3000 True Az=40.995 Ze=72.855 Az status=0008 Ze status=0009 05:05:28 Check angles 05:05:28 SkyScan query 05:05:28 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 05:05:28 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 05:05:29 Check angles 05:05:29 SkyScan query 05:05:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:05:29 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:05:29 Message to Master queued w/err=0: serial=53983 error=0 05:05:34 Received message from Master: op=Filter serial=53984 05:05:34 Color wheel filter change from 0 to 0 05:05:34 FLIGetFilterPos err=0 currentPosition=0 05:05:34 FLIGetStepsRemaining err=0 RemainingSteps=0 05:05:34 Filter is already there-color wheel unchanged 05:05:34 Received message from Master: op=Shutter serial=53985 05:05:34 Shutter LASER close 05:05:35 Received message from Camera: op=State serial=53987 05:05:35 GetSingleValue result=40 Value=cccccccc 05:05:35 SkyScan query 05:05:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:05:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:35 Parameters OK 05:05:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:35 Set A/D data flow result=40 05:05:35 Set A/D channel type result=40 05:05:35 Set A/D encoding result=40 05:05:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:35 Set channel filter=0.000000e+000 result=40 05:05:35 Config A/D Result=40 05:05:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:35 Get A/D filter: -9.255963e+061 result=40 05:05:35 Get A/D value=-858993460 result=40 05:05:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:35 Parameters OK 05:05:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:35 Set A/D data flow result=40 05:05:35 Set A/D channel type result=40 05:05:35 Set A/D encoding result=40 05:05:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:35 Set channel filter=0.000000e+000 result=40 05:05:35 Config A/D Result=40 05:05:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:35 Get A/D filter: -9.255963e+061 result=40 05:05:35 Get A/D value=-858993460 result=40 05:05:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:05:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:05:35 Aux= [UTC 2018-12-11 05:05:35] 05:05:35 Message to Camera, serial 53987 queued 05:06:12 Received message from Master: op=PointingHead serial=54000 05:06:12 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:06:12 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:06:12 Point started: ret=0 05:06:12 point_skyscan result=0 05:06:13 Check angles 05:06:13 SkyScan query 05:06:14 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 05:06:14 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 05:06:14 Check angles 05:06:14 SkyScan query 05:06:14 SkyScan query done: ret=0 az=81.57<-5438 ze=66.495<-7567 Statuses=0009 0008 05:06:14 Msec=750 True Az=81.57 Ze=66.495 Az status=0009 Ze status=0008 05:06:15 Check angles 05:06:15 SkyScan query 05:06:15 SkyScan query done: ret=0 az=99<-6600 ze=66.495<-7567 Statuses=0009 0008 05:06:15 Msec=1500 True Az=99 Ze=66.495 Az status=0009 Ze status=0008 05:06:15 Check angles 05:06:15 SkyScan query 05:06:16 SkyScan query done: ret=0 az=116.58<-7772 ze=66.495<-7567 Statuses=0009 0008 05:06:16 Msec=2250 True Az=116.58 Ze=66.495 Az status=0009 Ze status=0008 05:06:16 Check angles 05:06:16 SkyScan query 05:06:17 SkyScan query done: ret=0 az=134.07<-8938 ze=66.495<-7567 Statuses=0009 0008 05:06:17 Msec=3000 True Az=134.07 Ze=66.495 Az status=0009 Ze status=0008 05:06:17 Check angles 05:06:17 SkyScan query 05:06:17 SkyScan query done: ret=0 az=151.425<-10095 ze=66.495<-7567 Statuses=0009 0008 05:06:17 Msec=3750 True Az=151.425 Ze=66.495 Az status=0009 Ze status=0008 05:06:18 Check angles 05:06:18 SkyScan query 05:06:18 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 05:06:18 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 05:06:18 Message to Master queued w/err=0: serial=54000 error=0 05:06:23 Received message from Master: op=Filter serial=54001 05:06:23 Color wheel filter change from 0 to 0 05:06:23 FLIGetFilterPos err=0 currentPosition=0 05:06:23 FLIGetStepsRemaining err=0 RemainingSteps=0 05:06:23 Filter is already there-color wheel unchanged 05:06:23 Received message from Master: op=Shutter serial=54002 05:06:23 Shutter LASER close 05:06:23 Received message from Camera: op=State serial=54004 05:06:23 GetSingleValue result=40 Value=cccccccc 05:06:23 SkyScan query 05:06:24 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:06:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:24 Parameters OK 05:06:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:24 Set A/D data flow result=40 05:06:24 Set A/D channel type result=40 05:06:24 Set A/D encoding result=40 05:06:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:24 Set channel filter=0.000000e+000 result=40 05:06:24 Config A/D Result=40 05:06:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:24 Get A/D filter: -9.255963e+061 result=40 05:06:24 Get A/D value=-858993460 result=40 05:06:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:24 Parameters OK 05:06:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:24 Set A/D data flow result=40 05:06:24 Set A/D channel type result=40 05:06:24 Set A/D encoding result=40 05:06:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:24 Set channel filter=0.000000e+000 result=40 05:06:24 Config A/D Result=40 05:06:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:24 Get A/D filter: -9.255963e+061 result=40 05:06:24 Get A/D value=-858993460 result=40 05:06:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:24 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:06:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:06:24 Aux= 05:06:24 Message to Camera, serial 54004 queued 05:07:01 Received message from Master: op=PointingHead serial=54017 05:07:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:07:01 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:07:01 Point started: ret=0 05:07:01 point_skyscan result=0 05:07:02 Check angles 05:07:02 SkyScan query 05:07:02 SkyScan query done: ret=0 az=135.15<-9010 ze=36.855<-9543 Statuses=0009 0009 05:07:02 Msec=0 True Az=135.15 Ze=36.855 Az status=0009 Ze status=0009 05:07:03 Check angles 05:07:03 SkyScan query 05:07:03 SkyScan query done: ret=0 az=117.66<-7844 ze=15.915<-10939 Statuses=0009 0009 05:07:03 Msec=750 True Az=117.66 Ze=15.915 Az status=0009 Ze status=0009 05:07:03 Check angles 05:07:03 SkyScan query 05:07:04 SkyScan query done: ret=0 az=100.29<-6686 ze=-5.055<-12337 Statuses=0009 0009 05:07:04 Msec=1500 True Az=100.29 Ze=-5.055 Az status=0009 Ze status=0009 05:07:04 Check angles 05:07:04 SkyScan query 05:07:05 SkyScan query done: ret=0 az=82.725<-5515 ze=-26.01<-13734 Statuses=0009 0009 05:07:05 Msec=2250 True Az=82.725 Ze=-26.01 Az status=0009 Ze status=0009 05:07:05 Check angles 05:07:05 SkyScan query 05:07:05 SkyScan query done: ret=0 az=65.265<-4351 ze=-38.565<-14571 Statuses=0009 0008 05:07:05 Msec=3000 True Az=65.265 Ze=-38.565 Az status=0009 Ze status=0008 05:07:06 Check angles 05:07:06 SkyScan query 05:07:06 SkyScan query done: ret=0 az=47.835<-3189 ze=-38.535<-14569 Statuses=0009 0008 05:07:06 Msec=3750 True Az=47.835 Ze=-38.535 Az status=0009 Ze status=0008 05:07:06 Check angles 05:07:06 SkyScan query 05:07:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:07:07 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:07:07 Message to Master queued w/err=0: serial=54017 error=0 05:07:12 Received message from Master: op=Filter serial=54018 05:07:12 Color wheel filter change from 0 to 0 05:07:12 FLIGetFilterPos err=0 currentPosition=0 05:07:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:07:12 Filter is already there-color wheel unchanged 05:07:12 Received message from Master: op=Shutter serial=54019 05:07:12 Shutter LASER close 05:07:12 Received message from Camera: op=State serial=54021 05:07:12 GetSingleValue result=40 Value=cccccccc 05:07:12 SkyScan query 05:07:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:07:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:13 Parameters OK 05:07:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:13 Set A/D data flow result=40 05:07:13 Set A/D channel type result=40 05:07:13 Set A/D encoding result=40 05:07:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:13 Set channel filter=0.000000e+000 result=40 05:07:13 Config A/D Result=40 05:07:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:13 Get A/D filter: -9.255963e+061 result=40 05:07:13 Get A/D value=-858993460 result=40 05:07:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:13 Parameters OK 05:07:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:13 Set A/D data flow result=40 05:07:13 Set A/D channel type result=40 05:07:13 Set A/D encoding result=40 05:07:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:13 Set channel filter=0.000000e+000 result=40 05:07:13 Config A/D Result=40 05:07:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:13 Get A/D filter: -9.255963e+061 result=40 05:07:13 Get A/D value=-858993460 result=40 05:07:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:07:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:07:13 Aux= 05:07:13 Message to Camera, serial 54021 queued 05:07:50 Received message from Master: op=PointingHead serial=54034 05:07:50 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:07:50 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:07:50 Point started: ret=0 05:07:50 point_skyscan result=0 05:07:51 Check angles 05:07:51 SkyScan query 05:07:51 SkyScan query done: ret=0 az=64.365<-4291 ze=-68.79<-16586 Statuses=0009 0009 05:07:51 Msec=0 True Az=64.365 Ze=-68.79 Az status=0009 Ze status=0009 05:07:51 Check angles 05:07:51 SkyScan query 05:07:52 SkyScan query done: ret=0 az=82.38<-5492 ze=-90.165<-18011 Statuses=0009 0009 05:07:52 Msec=750 True Az=82.38 Ze=-90.165 Az status=0009 Ze status=0009 05:07:52 Check angles 05:07:52 SkyScan query 05:07:53 SkyScan query done: ret=0 az=99.795<-6653 ze=-111.105<-19407 Statuses=0009 0009 05:07:53 Msec=1500 True Az=99.795 Ze=-111.105 Az status=0009 Ze status=0009 05:07:53 Check angles 05:07:53 SkyScan query 05:07:54 SkyScan query done: ret=0 az=117.285<-7819 ze=-132.045<-20803 Statuses=0009 0009 05:07:54 Msec=2250 True Az=117.285 Ze=-132.045 Az status=0009 Ze status=0009 05:07:54 Check angles 05:07:54 SkyScan query 05:07:54 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 05:07:54 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 05:07:54 Check angles 05:07:54 SkyScan query 05:07:55 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:07:55 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:07:55 Message to Master queued w/err=0: serial=54034 error=0 05:08:00 Received message from Master: op=Filter serial=54035 05:08:00 Color wheel filter change from 0 to 0 05:08:00 FLIGetFilterPos err=0 currentPosition=0 05:08:00 FLIGetStepsRemaining err=0 RemainingSteps=0 05:08:00 Filter is already there-color wheel unchanged 05:08:00 Received message from Master: op=Shutter serial=54036 05:08:00 Shutter LASER close 05:08:00 Received message from Camera: op=State serial=54038 05:08:00 GetSingleValue result=40 Value=cccccccc 05:08:00 SkyScan query 05:08:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:08:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:01 Parameters OK 05:08:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:01 Set A/D data flow result=40 05:08:01 Set A/D channel type result=40 05:08:01 Set A/D encoding result=40 05:08:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:01 Set channel filter=0.000000e+000 result=40 05:08:01 Config A/D Result=40 05:08:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:01 Get A/D filter: -9.255963e+061 result=40 05:08:01 Get A/D value=-858993460 result=40 05:08:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:01 Parameters OK 05:08:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:01 Set A/D data flow result=40 05:08:01 Set A/D channel type result=40 05:08:01 Set A/D encoding result=40 05:08:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:01 Set channel filter=0.000000e+000 result=40 05:08:01 Config A/D Result=40 05:08:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:01 Get A/D filter: -9.255963e+061 result=40 05:08:01 Get A/D value=-858993460 result=40 05:08:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:01 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:08:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:08:01 Aux= 05:08:01 Message to Camera, serial 54038 queued 05:08:38 Received message from Master: op=PointingHead serial=54051 05:08:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:08:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:08:38 Point started: ret=0 05:08:38 point_skyscan result=0 05:08:39 Check angles 05:08:39 SkyScan query 05:08:39 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 05:08:39 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 05:08:40 Check angles 05:08:40 SkyScan query 05:08:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:08:40 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:08:40 Message to Master queued w/err=0: serial=54051 error=0 05:08:45 Received message from Master: op=Filter serial=54052 05:08:45 Color wheel filter change from 0 to 0 05:08:45 FLIGetFilterPos err=0 currentPosition=0 05:08:45 FLIGetStepsRemaining err=0 RemainingSteps=0 05:08:45 Filter is already there-color wheel unchanged 05:08:45 Received message from Master: op=Shutter serial=54053 05:08:45 Shutter LASER open 05:08:46 Received message from Camera: op=State serial=54055 05:08:46 GetSingleValue result=40 Value=cccccccc 05:08:46 SkyScan query 05:08:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:08:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:46 Parameters OK 05:08:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:46 Set A/D data flow result=40 05:08:46 Set A/D channel type result=40 05:08:46 Set A/D encoding result=40 05:08:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:46 Set channel filter=0.000000e+000 result=40 05:08:46 Config A/D Result=40 05:08:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:46 Get A/D filter: -9.255963e+061 result=40 05:08:46 Get A/D value=-858993460 result=40 05:08:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:46 Parameters OK 05:08:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:46 Set A/D data flow result=40 05:08:46 Set A/D channel type result=40 05:08:46 Set A/D encoding result=40 05:08:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:46 Set channel filter=0.000000e+000 result=40 05:08:46 Config A/D Result=40 05:08:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:46 Get A/D filter: -9.255963e+061 result=40 05:08:46 Get A/D value=-858993460 result=40 05:08:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:08:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:08:46 Aux= 05:08:46 Message to Camera, serial 54055 queued 05:08:55 Received message from Master: op=Shutter serial=54065 05:08:55 Shutter LASER close 05:08:55 Received message from Master: op=PointingHead serial=54069 05:08:55 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:08:55 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:08:55 Point started: ret=0 05:08:55 point_skyscan result=0 05:08:56 Check angles 05:08:56 SkyScan query 05:08:57 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.205<-21547 Statuses=0009 0009 05:08:57 Msec=0 True Az=135.975 Ze=-143.205 Az status=0009 Ze status=0009 05:08:57 Check angles 05:08:57 SkyScan query 05:08:58 SkyScan query done: ret=0 az=153.54<-10236 ze=-122.22<-20148 Statuses=0009 0009 05:08:58 Msec=750 True Az=153.54 Ze=-122.22 Az status=0009 Ze status=0009 05:08:58 Check angles 05:08:58 SkyScan query 05:08:58 SkyScan query done: ret=0 az=170.955<-11397 ze=-101.34<-18756 Statuses=0009 0009 05:08:58 Msec=1500 True Az=170.955 Ze=-101.34 Az status=0009 Ze status=0009 05:08:58 Check angles 05:08:58 SkyScan query 05:08:59 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.325<-17355 Statuses=0008 0009 05:08:59 Msec=2250 True Az=176.025 Ze=-80.325 Az status=0008 Ze status=0009 05:08:59 Check angles 05:08:59 SkyScan query 05:09:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.4<-15960 Statuses=0008 0009 05:09:00 Msec=3000 True Az=175.995 Ze=-59.4 Az status=0008 Ze status=0009 05:09:00 Check angles 05:09:00 SkyScan query 05:09:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:09:01 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:09:01 Message to Master queued w/err=0: serial=54069 error=0 05:09:06 Received message from Master: op=Filter serial=54070 05:09:06 Color wheel filter change from 0 to 0 05:09:06 FLIGetFilterPos err=0 currentPosition=0 05:09:06 FLIGetStepsRemaining err=0 RemainingSteps=0 05:09:06 Filter is already there-color wheel unchanged 05:09:06 Received message from Master: op=Shutter serial=54071 05:09:06 Shutter LASER close 05:09:06 Received message from Camera: op=State serial=54073 05:09:06 GetSingleValue result=40 Value=cccccccc 05:09:06 SkyScan query 05:09:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:09:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:06 Parameters OK 05:09:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:06 Set A/D data flow result=40 05:09:06 Set A/D channel type result=40 05:09:06 Set A/D encoding result=40 05:09:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:06 Set channel filter=0.000000e+000 result=40 05:09:06 Config A/D Result=40 05:09:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:06 Get A/D filter: -9.255963e+061 result=40 05:09:06 Get A/D value=-858993460 result=40 05:09:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:06 Parameters OK 05:09:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:06 Set A/D data flow result=40 05:09:06 Set A/D channel type result=40 05:09:06 Set A/D encoding result=40 05:09:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:06 Set channel filter=0.000000e+000 result=40 05:09:06 Config A/D Result=40 05:09:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:06 Get A/D filter: -9.255963e+061 result=40 05:09:06 Get A/D value=-858993460 result=40 05:09:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:09:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:09:06 Aux= 05:09:06 Message to Camera, serial 54073 queued 05:09:43 Received message from Master: op=PointingHead serial=54086 05:09:43 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:09:43 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:09:44 Point started: ret=0 05:09:44 point_skyscan result=0 05:09:44 Check angles 05:09:44 SkyScan query 05:09:45 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.735<-13449 Statuses=0009 0009 05:09:45 Msec=0 True Az=152.94 Ze=-21.735 Az status=0009 Ze status=0009 05:09:45 Check angles 05:09:45 SkyScan query 05:09:46 SkyScan query done: ret=0 az=135.525<-9035 ze=-0.705<-12047 Statuses=0009 0009 05:09:46 Msec=750 True Az=135.525 Ze=-0.705 Az status=0009 Ze status=0009 05:09:46 Check angles 05:09:46 SkyScan query 05:09:46 SkyScan query done: ret=0 az=117.525<-7835 ze=20.64<-10624 Statuses=0009 0009 05:09:46 Msec=1500 True Az=117.525 Ze=20.64 Az status=0009 Ze status=0009 05:09:47 Check angles 05:09:47 SkyScan query 05:09:47 SkyScan query done: ret=0 az=99.81<-6654 ze=42.06<-9196 Statuses=0009 0009 05:09:47 Msec=2250 True Az=99.81 Ze=42.06 Az status=0009 Ze status=0009 05:09:47 Check angles 05:09:47 SkyScan query 05:09:48 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 05:09:48 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 05:09:48 Check angles 05:09:48 SkyScan query 05:09:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:09:49 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:09:49 Message to Master queued w/err=0: serial=54086 error=0 05:09:54 Received message from Master: op=Filter serial=54087 05:09:54 Color wheel filter change from 0 to 0 05:09:54 FLIGetFilterPos err=0 currentPosition=0 05:09:54 FLIGetStepsRemaining err=0 RemainingSteps=0 05:09:54 Filter is already there-color wheel unchanged 05:09:54 Received message from Master: op=Shutter serial=54088 05:09:54 Shutter LASER close 05:09:54 Received message from Camera: op=State serial=54090 05:09:54 GetSingleValue result=40 Value=cccccccc 05:09:54 SkyScan query 05:09:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:09:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:55 Parameters OK 05:09:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:55 Set A/D data flow result=40 05:09:55 Set A/D channel type result=40 05:09:55 Set A/D encoding result=40 05:09:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:55 Set channel filter=0.000000e+000 result=40 05:09:55 Config A/D Result=40 05:09:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:55 Get A/D filter: -9.255963e+061 result=40 05:09:55 Get A/D value=-858993460 result=40 05:09:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:55 Parameters OK 05:09:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:55 Set A/D data flow result=40 05:09:55 Set A/D channel type result=40 05:09:55 Set A/D encoding result=40 05:09:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:55 Set channel filter=0.000000e+000 result=40 05:09:55 Config A/D Result=40 05:09:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:55 Get A/D filter: -9.255963e+061 result=40 05:09:55 Get A/D value=-858993460 result=40 05:09:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:09:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:09:55 Aux= 05:09:55 Message to Camera, serial 54090 queued 05:10:31 Received message from Master: op=PointingHead serial=54103 05:10:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:10:31 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:10:32 Point started: ret=0 05:10:32 point_skyscan result=0 05:10:32 Check angles 05:10:32 SkyScan query 05:10:33 SkyScan query done: ret=0 az=109.08<-7272 ze=38.49<-9434 Statuses=0009 0008 05:10:33 Msec=0 True Az=109.08 Ze=38.49 Az status=0009 Ze status=0008 05:10:33 Check angles 05:10:33 SkyScan query 05:10:34 SkyScan query done: ret=0 az=126.72<-8448 ze=38.505<-9433 Statuses=0009 0008 05:10:34 Msec=750 True Az=126.72 Ze=38.505 Az status=0009 Ze status=0008 05:10:34 Check angles 05:10:34 SkyScan query 05:10:35 SkyScan query done: ret=0 az=144.36<-9624 ze=38.505<-9433 Statuses=0009 0008 05:10:35 Msec=1500 True Az=144.36 Ze=38.505 Az status=0009 Ze status=0008 05:10:35 Check angles 05:10:35 SkyScan query 05:10:35 SkyScan query done: ret=0 az=161.79<-10786 ze=38.505<-9433 Statuses=0009 0008 05:10:35 Msec=2250 True Az=161.79 Ze=38.505 Az status=0009 Ze status=0008 05:10:36 Check angles 05:10:36 SkyScan query 05:10:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 05:10:36 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 05:10:36 Check angles 05:10:36 SkyScan query 05:10:37 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:10:37 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:10:37 Message to Master queued w/err=0: serial=54103 error=0 05:10:42 Received message from Master: op=Filter serial=54104 05:10:42 Color wheel filter change from 0 to 0 05:10:42 FLIGetFilterPos err=0 currentPosition=0 05:10:42 FLIGetStepsRemaining err=0 RemainingSteps=0 05:10:42 Filter is already there-color wheel unchanged 05:10:42 Received message from Master: op=Shutter serial=54105 05:10:42 Shutter LASER close 05:10:42 Received message from Camera: op=State serial=54107 05:10:42 GetSingleValue result=40 Value=cccccccc 05:10:42 SkyScan query 05:10:43 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:10:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:43 Parameters OK 05:10:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:43 Set A/D data flow result=40 05:10:43 Set A/D channel type result=40 05:10:43 Set A/D encoding result=40 05:10:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:43 Set channel filter=0.000000e+000 result=40 05:10:43 Config A/D Result=40 05:10:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:43 Get A/D filter: -9.255963e+061 result=40 05:10:43 Get A/D value=-858993460 result=40 05:10:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:43 Parameters OK 05:10:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:43 Set A/D data flow result=40 05:10:43 Set A/D channel type result=40 05:10:43 Set A/D encoding result=40 05:10:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:43 Set channel filter=0.000000e+000 result=40 05:10:43 Config A/D Result=40 05:10:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:43 Get A/D filter: -9.255963e+061 result=40 05:10:43 Get A/D value=-858993460 result=40 05:10:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:10:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:10:43 Aux= 05:10:43 Message to Camera, serial 54107 queued 05:11:19 Received message from Master: op=PointingHead serial=54120 05:11:19 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:11:19 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:11:20 Point started: ret=0 05:11:20 point_skyscan result=0 05:11:21 Check angles 05:11:21 SkyScan query 05:11:21 SkyScan query done: ret=0 az=153.225<-10215 ze=8.955<-11403 Statuses=0009 0009 05:11:21 Msec=0 True Az=153.225 Ze=8.955 Az status=0009 Ze status=0009 05:11:21 Check angles 05:11:21 SkyScan query 05:11:22 SkyScan query done: ret=0 az=135.84<-9056 ze=-12.03<-12802 Statuses=0009 0009 05:11:22 Msec=750 True Az=135.84 Ze=-12.03 Az status=0009 Ze status=0009 05:11:22 Check angles 05:11:22 SkyScan query 05:11:23 SkyScan query done: ret=0 az=118.215<-7881 ze=-32.955<-14197 Statuses=0009 0009 05:11:23 Msec=1500 True Az=118.215 Ze=-32.955 Az status=0009 Ze status=0009 05:11:23 Check angles 05:11:23 SkyScan query 05:11:23 SkyScan query done: ret=0 az=100.71<-6714 ze=-51.51<-15434 Statuses=0009 0009 05:11:23 Msec=2250 True Az=100.71 Ze=-51.51 Az status=0009 Ze status=0009 05:11:24 Check angles 05:11:24 SkyScan query 05:11:24 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 05:11:24 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 05:11:24 Check angles 05:11:24 SkyScan query 05:11:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:11:25 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:11:25 Message to Master queued w/err=0: serial=54120 error=0 05:11:30 Received message from Master: op=Filter serial=54121 05:11:30 Color wheel filter change from 0 to 0 05:11:30 FLIGetFilterPos err=0 currentPosition=0 05:11:30 FLIGetStepsRemaining err=0 RemainingSteps=0 05:11:30 Filter is already there-color wheel unchanged 05:11:30 Received message from Master: op=Shutter serial=54122 05:11:30 Shutter LASER close 05:11:30 Received message from Camera: op=State serial=54124 05:11:30 GetSingleValue result=40 Value=cccccccc 05:11:30 SkyScan query 05:11:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:11:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:31 Parameters OK 05:11:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:31 Set A/D data flow result=40 05:11:31 Set A/D channel type result=40 05:11:31 Set A/D encoding result=40 05:11:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:31 Set channel filter=0.000000e+000 result=40 05:11:31 Config A/D Result=40 05:11:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:31 Get A/D filter: -9.255963e+061 result=40 05:11:31 Get A/D value=-858993460 result=40 05:11:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:31 Parameters OK 05:11:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:31 Set A/D data flow result=40 05:11:31 Set A/D channel type result=40 05:11:31 Set A/D encoding result=40 05:11:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:31 Set channel filter=0.000000e+000 result=40 05:11:31 Config A/D Result=40 05:11:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:31 Get A/D filter: -9.255963e+061 result=40 05:11:31 Get A/D value=-858993460 result=40 05:11:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:11:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:11:31 Aux= 05:11:31 Message to Camera, serial 54124 queued 05:12:08 Received message from Master: op=PointingHead serial=54137 05:12:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:12:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:12:08 Point started: ret=0 05:12:08 point_skyscan result=0 05:12:09 Check angles 05:12:09 SkyScan query 05:12:09 SkyScan query done: ret=0 az=109.215<-7281 ze=-81.495<-17433 Statuses=0009 0009 05:12:09 Msec=0 True Az=109.215 Ze=-81.495 Az status=0009 Ze status=0009 05:12:09 Check angles 05:12:09 SkyScan query 05:12:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.87<-18858 Statuses=0008 0009 05:12:10 Msec=750 True Az=112.995 Ze=-102.87 Az status=0008 Ze status=0009 05:12:10 Check angles 05:12:10 SkyScan query 05:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.84<-20256 Statuses=0008 0009 05:12:11 Msec=1500 True Az=112.995 Ze=-123.84 Az status=0008 Ze status=0009 05:12:11 Check angles 05:12:11 SkyScan query 05:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.23<-21682 Statuses=0008 0009 05:12:11 Msec=2250 True Az=112.995 Ze=-145.23 Az status=0008 Ze status=0009 05:12:12 Check angles 05:12:12 SkyScan query 05:12:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.62<-23108 Statuses=0008 0009 05:12:12 Msec=3000 True Az=112.995 Ze=-166.62 Az status=0008 Ze status=0009 05:12:12 Check angles 05:12:12 SkyScan query 05:12:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:12:13 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:12:13 Message to Master queued w/err=0: serial=54137 error=0 05:12:18 Received message from Master: op=Filter serial=54138 05:12:18 Color wheel filter change from 0 to 0 05:12:18 FLIGetFilterPos err=0 currentPosition=0 05:12:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:12:18 Filter is already there-color wheel unchanged 05:12:18 Received message from Master: op=Shutter serial=54139 05:12:18 Shutter LASER open 05:12:18 Received message from Camera: op=State serial=54141 05:12:18 GetSingleValue result=40 Value=cccccccc 05:12:18 SkyScan query 05:12:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:12:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:19 Parameters OK 05:12:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:19 Set A/D data flow result=40 05:12:19 Set A/D channel type result=40 05:12:19 Set A/D encoding result=40 05:12:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:19 Set channel filter=0.000000e+000 result=40 05:12:19 Config A/D Result=40 05:12:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:19 Get A/D filter: -9.255963e+061 result=40 05:12:19 Get A/D value=-858993460 result=40 05:12:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:19 Parameters OK 05:12:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:19 Set A/D data flow result=40 05:12:19 Set A/D channel type result=40 05:12:19 Set A/D encoding result=40 05:12:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:19 Set channel filter=0.000000e+000 result=40 05:12:19 Config A/D Result=40 05:12:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:19 Get A/D filter: -9.255963e+061 result=40 05:12:19 Get A/D value=-858993460 result=40 05:12:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:12:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:12:19 Aux= 05:12:19 Message to Camera, serial 54141 queued 05:12:27 Received message from Master: op=Shutter serial=54151 05:12:27 Shutter LASER close 05:12:28 Received message from Master: op=PointingHead serial=54155 05:12:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:12:28 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:12:28 Point started: ret=0 05:12:28 point_skyscan result=0 05:12:29 Check angles 05:12:29 SkyScan query 05:12:29 SkyScan query done: ret=0 az=90.195<-6013 ze=157.56<-1496 Statuses=0009 0009 05:12:29 Msec=0 True Az=90.195 Ze=157.56 Az status=0009 Ze status=0009 05:12:30 Check angles 05:12:30 SkyScan query 05:12:30 SkyScan query done: ret=0 az=72.78<-4852 ze=136.575<-2895 Statuses=0009 0009 05:12:30 Msec=750 True Az=72.78 Ze=136.575 Az status=0009 Ze status=0009 05:12:30 Check angles 05:12:30 SkyScan query 05:12:31 SkyScan query done: ret=0 az=55.23<-3682 ze=115.665<-4289 Statuses=0009 0009 05:12:31 Msec=1500 True Az=55.23 Ze=115.665 Az status=0009 Ze status=0009 05:12:31 Check angles 05:12:31 SkyScan query 05:12:32 SkyScan query done: ret=0 az=40.875<-2725 ze=94.665<-5689 Statuses=0009 0009 05:12:32 Msec=2250 True Az=40.875 Ze=94.665 Az status=0009 Ze status=0009 05:12:32 Check angles 05:12:32 SkyScan query 05:12:32 SkyScan query done: ret=0 az=40.995<-2733 ze=73.275<-7115 Statuses=0008 0009 05:12:32 Msec=3000 True Az=40.995 Ze=73.275 Az status=0008 Ze status=0009 05:12:33 Check angles 05:12:33 SkyScan query 05:12:33 SkyScan query done: ret=0 az=40.995<-2733 ze=52.755<-8483 Statuses=0008 0009 05:12:33 Msec=3750 True Az=40.995 Ze=52.755 Az status=0008 Ze status=0009 05:12:33 Check angles 05:12:33 SkyScan query 05:12:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:12:34 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:12:34 Message to Master queued w/err=0: serial=54155 error=0 05:12:39 Received message from Master: op=Filter serial=54156 05:12:39 Color wheel filter change from 0 to 0 05:12:39 FLIGetFilterPos err=0 currentPosition=0 05:12:39 FLIGetStepsRemaining err=0 RemainingSteps=0 05:12:39 Filter is already there-color wheel unchanged 05:12:39 Received message from Master: op=Shutter serial=54157 05:12:39 Shutter LASER close 05:12:39 Received message from Camera: op=State serial=54159 05:12:39 GetSingleValue result=40 Value=cccccccc 05:12:39 SkyScan query 05:12:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:12:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:40 Parameters OK 05:12:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:40 Set A/D data flow result=40 05:12:40 Set A/D channel type result=40 05:12:40 Set A/D encoding result=40 05:12:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:40 Set channel filter=0.000000e+000 result=40 05:12:40 Config A/D Result=40 05:12:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:40 Get A/D filter: -9.255963e+061 result=40 05:12:40 Get A/D value=-858993460 result=40 05:12:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:40 Parameters OK 05:12:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:40 Set A/D data flow result=40 05:12:40 Set A/D channel type result=40 05:12:40 Set A/D encoding result=40 05:12:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:40 Set channel filter=0.000000e+000 result=40 05:12:40 Config A/D Result=40 05:12:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:40 Get A/D filter: -9.255963e+061 result=40 05:12:40 Get A/D value=-858993460 result=40 05:12:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:12:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:12:40 Aux= 05:12:40 Message to Camera, serial 54159 queued 05:13:16 Received message from Master: op=PointingHead serial=54171 05:13:16 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:13:16 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:13:16 Point started: ret=0 05:13:16 point_skyscan result=0 05:13:17 Check angles 05:13:17 SkyScan query 05:13:17 SkyScan query done: ret=0 az=63.84<-4256 ze=66.555<-7563 Statuses=0009 0008 05:13:17 Msec=0 True Az=63.84 Ze=66.555 Az status=0009 Ze status=0008 05:13:18 Check angles 05:13:18 SkyScan query 05:13:18 SkyScan query done: ret=0 az=81.345<-5423 ze=66.495<-7567 Statuses=0009 0008 05:13:18 Msec=750 True Az=81.345 Ze=66.495 Az status=0009 Ze status=0008 05:13:18 Check angles 05:13:18 SkyScan query 05:13:19 SkyScan query done: ret=0 az=98.865<-6591 ze=66.495<-7567 Statuses=0009 0008 05:13:19 Msec=1500 True Az=98.865 Ze=66.495 Az status=0009 Ze status=0008 05:13:19 Check angles 05:13:19 SkyScan query 05:13:20 SkyScan query done: ret=0 az=116.775<-7785 ze=66.495<-7567 Statuses=0009 0008 05:13:20 Msec=2250 True Az=116.775 Ze=66.495 Az status=0009 Ze status=0008 05:13:20 Check angles 05:13:20 SkyScan query 05:13:21 SkyScan query done: ret=0 az=134.595<-8973 ze=66.495<-7567 Statuses=0009 0008 05:13:21 Msec=3000 True Az=134.595 Ze=66.495 Az status=0009 Ze status=0008 05:13:21 Check angles 05:13:21 SkyScan query 05:13:21 SkyScan query done: ret=0 az=152.085<-10139 ze=66.495<-7567 Statuses=0009 0008 05:13:21 Msec=3750 True Az=152.085 Ze=66.495 Az status=0009 Ze status=0008 05:13:21 Check angles 05:13:21 SkyScan query 05:13:22 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:13:22 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 05:13:22 Message to Master queued w/err=0: serial=54171 error=0 05:13:27 Received message from Master: op=Filter serial=54172 05:13:27 Color wheel filter change from 0 to 0 05:13:27 FLIGetFilterPos err=0 currentPosition=0 05:13:27 FLIGetStepsRemaining err=0 RemainingSteps=0 05:13:27 Filter is already there-color wheel unchanged 05:13:27 Received message from Master: op=Shutter serial=54173 05:13:27 Shutter LASER close 05:13:27 Received message from Camera: op=State serial=54175 05:13:27 GetSingleValue result=40 Value=cccccccc 05:13:27 SkyScan query 05:13:28 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:13:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:28 Parameters OK 05:13:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:28 Set A/D data flow result=40 05:13:28 Set A/D channel type result=40 05:13:28 Set A/D encoding result=40 05:13:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:28 Set channel filter=0.000000e+000 result=40 05:13:28 Config A/D Result=40 05:13:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:28 Get A/D filter: -9.255963e+061 result=40 05:13:28 Get A/D value=-858993460 result=40 05:13:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:28 Parameters OK 05:13:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:28 Set A/D data flow result=40 05:13:28 Set A/D channel type result=40 05:13:28 Set A/D encoding result=40 05:13:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:28 Set channel filter=0.000000e+000 result=40 05:13:28 Config A/D Result=40 05:13:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:28 Get A/D filter: -9.255963e+061 result=40 05:13:28 Get A/D value=-858993460 result=40 05:13:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:28 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:13:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:13:28 Aux= 05:13:28 Message to Camera, serial 54175 queued 05:14:05 Received message from Master: op=PointingHead serial=54188 05:14:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:14:05 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:14:05 Point started: ret=0 05:14:05 point_skyscan result=0 05:14:06 Check angles 05:14:06 SkyScan query 05:14:06 SkyScan query done: ret=0 az=134.58<-8972 ze=36.315<-9579 Statuses=0009 0009 05:14:06 Msec=0 True Az=134.58 Ze=36.315 Az status=0009 Ze status=0009 05:14:07 Check angles 05:14:07 SkyScan query 05:14:07 SkyScan query done: ret=0 az=116.835<-7789 ze=14.895<-11007 Statuses=0009 0009 05:14:07 Msec=750 True Az=116.835 Ze=14.895 Az status=0009 Ze status=0009 05:14:07 Check angles 05:14:07 SkyScan query 05:14:08 SkyScan query done: ret=0 az=99.39<-6626 ze=-6.03<-12402 Statuses=0009 0009 05:14:08 Msec=1500 True Az=99.39 Ze=-6.03 Az status=0009 Ze status=0009 05:14:08 Check angles 05:14:08 SkyScan query 05:14:09 SkyScan query done: ret=0 az=81.975<-5465 ze=-27.015<-13801 Statuses=0009 0009 05:14:09 Msec=2250 True Az=81.975 Ze=-27.015 Az status=0009 Ze status=0009 05:14:09 Check angles 05:14:09 SkyScan query 05:14:09 SkyScan query done: ret=0 az=64.425<-4295 ze=-38.58<-14572 Statuses=0009 0008 05:14:09 Msec=3000 True Az=64.425 Ze=-38.58 Az status=0009 Ze status=0008 05:14:10 Check angles 05:14:10 SkyScan query 05:14:10 SkyScan query done: ret=0 az=47.04<-3136 ze=-38.52<-14568 Statuses=0009 0008 05:14:10 Msec=3750 True Az=47.04 Ze=-38.52 Az status=0009 Ze status=0008 05:14:10 Check angles 05:14:10 SkyScan query 05:14:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:14:11 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:14:11 Message to Master queued w/err=0: serial=54188 error=0 05:14:16 Received message from Master: op=Filter serial=54189 05:14:16 Color wheel filter change from 0 to 0 05:14:16 FLIGetFilterPos err=0 currentPosition=0 05:14:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:14:16 Filter is already there-color wheel unchanged 05:14:16 Received message from Master: op=Shutter serial=54190 05:14:16 Shutter LASER close 05:14:16 Received message from Camera: op=State serial=54192 05:14:16 GetSingleValue result=40 Value=cccccccc 05:14:16 SkyScan query 05:14:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:14:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:17 Parameters OK 05:14:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:17 Set A/D data flow result=40 05:14:17 Set A/D channel type result=40 05:14:17 Set A/D encoding result=40 05:14:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:17 Set channel filter=0.000000e+000 result=40 05:14:17 Config A/D Result=40 05:14:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:17 Get A/D filter: -9.255963e+061 result=40 05:14:17 Get A/D value=-858993460 result=40 05:14:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:17 Parameters OK 05:14:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:17 Set A/D data flow result=40 05:14:17 Set A/D channel type result=40 05:14:17 Set A/D encoding result=40 05:14:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:17 Set channel filter=0.000000e+000 result=40 05:14:17 Config A/D Result=40 05:14:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:17 Get A/D filter: -9.255963e+061 result=40 05:14:17 Get A/D value=-858993460 result=40 05:14:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:14:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:14:17 Aux= 05:14:17 Message to Camera, serial 54192 queued 05:14:53 Received message from Master: op=PointingHead serial=54205 05:14:53 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:14:53 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:14:54 Point started: ret=0 05:14:54 point_skyscan result=0 05:14:55 Check angles 05:14:55 SkyScan query 05:14:55 SkyScan query done: ret=0 az=63.84<-4256 ze=-68.13<-16542 Statuses=0009 0009 05:14:55 Msec=0 True Az=63.84 Ze=-68.13 Az status=0009 Ze status=0009 05:14:55 Check angles 05:14:55 SkyScan query 05:14:56 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.13<-17942 Statuses=0009 0009 05:14:56 Msec=750 True Az=81.315 Ze=-89.13 Az status=0009 Ze status=0009 05:14:56 Check angles 05:14:56 SkyScan query 05:14:57 SkyScan query done: ret=0 az=99<-6600 ze=-110.055<-19337 Statuses=0009 0009 05:14:57 Msec=1500 True Az=99 Ze=-110.055 Az status=0009 Ze status=0009 05:14:57 Check angles 05:14:57 SkyScan query 05:14:57 SkyScan query done: ret=0 az=116.82<-7788 ze=-131.445<-20763 Statuses=0009 0009 05:14:57 Msec=2250 True Az=116.82 Ze=-131.445 Az status=0009 Ze status=0009 05:14:58 Check angles 05:14:58 SkyScan query 05:14:58 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 05:14:58 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 05:14:58 Check angles 05:14:58 SkyScan query 05:14:59 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:14:59 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:14:59 Message to Master queued w/err=0: serial=54205 error=0 05:15:04 Received message from Master: op=Filter serial=54206 05:15:04 Color wheel filter change from 0 to 0 05:15:04 FLIGetFilterPos err=0 currentPosition=0 05:15:04 FLIGetStepsRemaining err=0 RemainingSteps=0 05:15:04 Filter is already there-color wheel unchanged 05:15:04 Received message from Master: op=Shutter serial=54207 05:15:04 Shutter LASER close 05:15:04 Received message from Camera: op=State serial=54209 05:15:04 GetSingleValue result=40 Value=cccccccc 05:15:04 SkyScan query 05:15:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:15:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:05 Parameters OK 05:15:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:05 Set A/D data flow result=40 05:15:05 Set A/D channel type result=40 05:15:05 Set A/D encoding result=40 05:15:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:05 Set channel filter=0.000000e+000 result=40 05:15:05 Config A/D Result=40 05:15:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:05 Get A/D filter: -9.255963e+061 result=40 05:15:05 Get A/D value=-858993460 result=40 05:15:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:05 Parameters OK 05:15:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:05 Set A/D data flow result=40 05:15:05 Set A/D channel type result=40 05:15:05 Set A/D encoding result=40 05:15:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:05 Set channel filter=0.000000e+000 result=40 05:15:05 Config A/D Result=40 05:15:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:05 Get A/D filter: -9.255963e+061 result=40 05:15:05 Get A/D value=-858993460 result=40 05:15:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:05 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:15:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:15:05 Aux= 05:15:05 Message to Camera, serial 54209 queued 05:15:29 Received message from Master: op=Identify serial=54210 05:15:42 Received message from Master: op=PointingHead serial=54225 05:15:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:15:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:15:42 Point started: ret=0 05:15:42 point_skyscan result=0 05:15:43 Check angles 05:15:43 SkyScan query 05:15:43 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.345<-23423 Statuses=0009 0009 05:15:43 Msec=0 True Az=113.01 Ze=-171.345 Az status=0009 Ze status=0009 05:15:43 Check angles 05:15:43 SkyScan query 05:15:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:15:44 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:15:44 Message to Master queued w/err=0: serial=54225 error=0 05:15:49 Received message from Master: op=Filter serial=54226 05:15:49 Color wheel filter change from 0 to 0 05:15:49 FLIGetFilterPos err=0 currentPosition=0 05:15:49 FLIGetStepsRemaining err=0 RemainingSteps=0 05:15:49 Filter is already there-color wheel unchanged 05:15:49 Received message from Master: op=Shutter serial=54227 05:15:49 Shutter LASER open 05:15:49 Received message from Camera: op=State serial=54229 05:15:49 GetSingleValue result=40 Value=cccccccc 05:15:49 SkyScan query 05:15:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:15:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:50 Parameters OK 05:15:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:50 Set A/D data flow result=40 05:15:50 Set A/D channel type result=40 05:15:50 Set A/D encoding result=40 05:15:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:50 Set channel filter=0.000000e+000 result=40 05:15:50 Config A/D Result=40 05:15:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:50 Get A/D filter: -9.255963e+061 result=40 05:15:50 Get A/D value=-858993460 result=40 05:15:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:50 Parameters OK 05:15:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:50 Set A/D data flow result=40 05:15:50 Set A/D channel type result=40 05:15:50 Set A/D encoding result=40 05:15:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:50 Set channel filter=0.000000e+000 result=40 05:15:50 Config A/D Result=40 05:15:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:50 Get A/D filter: -9.255963e+061 result=40 05:15:50 Get A/D value=-858993460 result=40 05:15:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:15:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:15:50 Aux= 05:15:50 Message to Camera, serial 54229 queued [UTC 2018-12-11 05:15:54] 05:15:58 Received message from Master: op=Shutter serial=54239 05:15:58 Shutter LASER close 05:15:59 Received message from Master: op=PointingHead serial=54243 05:15:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:15:59 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:15:59 Point started: ret=0 05:15:59 point_skyscan result=0 05:16:00 Check angles 05:16:00 SkyScan query 05:16:01 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.31<-21554 Statuses=0009 0009 05:16:01 Msec=0 True Az=135.945 Ze=-143.31 Az status=0009 Ze status=0009 05:16:01 Check angles 05:16:01 SkyScan query 05:16:01 SkyScan query done: ret=0 az=153.405<-10227 ze=-122.37<-20158 Statuses=0009 0009 05:16:01 Msec=750 True Az=153.405 Ze=-122.37 Az status=0009 Ze status=0009 05:16:02 Check angles 05:16:02 SkyScan query 05:16:02 SkyScan query done: ret=0 az=170.895<-11393 ze=-101.46<-18764 Statuses=0009 0009 05:16:02 Msec=1500 True Az=170.895 Ze=-101.46 Az status=0009 Ze status=0009 05:16:02 Check angles 05:16:02 SkyScan query 05:16:03 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.46<-17364 Statuses=0008 0009 05:16:03 Msec=2250 True Az=176.025 Ze=-80.46 Az status=0008 Ze status=0009 05:16:03 Check angles 05:16:03 SkyScan query 05:16:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.505<-15967 Statuses=0008 0009 05:16:04 Msec=3000 True Az=175.995 Ze=-59.505 Az status=0008 Ze status=0009 05:16:04 Check angles 05:16:04 SkyScan query 05:16:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:16:04 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:16:04 Message to Master queued w/err=0: serial=54243 error=0 05:16:09 Received message from Master: op=Filter serial=54244 05:16:09 Color wheel filter change from 0 to 0 05:16:09 FLIGetFilterPos err=0 currentPosition=0 05:16:09 FLIGetStepsRemaining err=0 RemainingSteps=0 05:16:09 Filter is already there-color wheel unchanged 05:16:10 Received message from Master: op=Shutter serial=54245 05:16:10 Shutter LASER close 05:16:10 Received message from Camera: op=State serial=54247 05:16:10 GetSingleValue result=40 Value=cccccccc 05:16:10 SkyScan query 05:16:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:16:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:11 Parameters OK 05:16:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:11 Set A/D data flow result=40 05:16:11 Set A/D channel type result=40 05:16:11 Set A/D encoding result=40 05:16:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:11 Set channel filter=0.000000e+000 result=40 05:16:11 Config A/D Result=40 05:16:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:11 Get A/D filter: -9.255963e+061 result=40 05:16:11 Get A/D value=-858993460 result=40 05:16:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:11 Parameters OK 05:16:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:11 Set A/D data flow result=40 05:16:11 Set A/D channel type result=40 05:16:11 Set A/D encoding result=40 05:16:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:11 Set channel filter=0.000000e+000 result=40 05:16:11 Config A/D Result=40 05:16:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:11 Get A/D filter: -9.255963e+061 result=40 05:16:11 Get A/D value=-858993460 result=40 05:16:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:16:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:16:11 Aux= 05:16:11 Message to Camera, serial 54247 queued 05:16:47 Received message from Master: op=PointingHead serial=54260 05:16:47 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:16:47 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:16:48 Point started: ret=0 05:16:48 point_skyscan result=0 05:16:48 Check angles 05:16:48 SkyScan query 05:16:49 SkyScan query done: ret=0 az=153.24<-10216 ze=-22.005<-13467 Statuses=0009 0009 05:16:49 Msec=0 True Az=153.24 Ze=-22.005 Az status=0009 Ze status=0009 05:16:49 Check angles 05:16:49 SkyScan query 05:16:50 SkyScan query done: ret=0 az=135.795<-9053 ze=-1.035<-12069 Statuses=0009 0009 05:16:50 Msec=750 True Az=135.795 Ze=-1.035 Az status=0009 Ze status=0009 05:16:50 Check angles 05:16:50 SkyScan query 05:16:51 SkyScan query done: ret=0 az=118.26<-7884 ze=19.92<-10672 Statuses=0009 0009 05:16:51 Msec=1500 True Az=118.26 Ze=19.92 Az status=0009 Ze status=0009 05:16:51 Check angles 05:16:51 SkyScan query 05:16:51 SkyScan query done: ret=0 az=100.665<-6711 ze=40.875<-9275 Statuses=0009 0009 05:16:51 Msec=2250 True Az=100.665 Ze=40.875 Az status=0009 Ze status=0009 05:16:51 Check angles 05:16:51 SkyScan query 05:16:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 05:16:52 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 05:16:52 Check angles 05:16:52 SkyScan query 05:16:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:16:53 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:16:53 Message to Master queued w/err=0: serial=54260 error=0 05:16:58 Received message from Master: op=Filter serial=54261 05:16:58 Color wheel filter change from 0 to 0 05:16:58 FLIGetFilterPos err=0 currentPosition=0 05:16:58 FLIGetStepsRemaining err=0 RemainingSteps=0 05:16:58 Filter is already there-color wheel unchanged 05:16:58 Received message from Master: op=Shutter serial=54262 05:16:58 Shutter LASER close 05:16:58 Received message from Camera: op=State serial=54264 05:16:58 GetSingleValue result=40 Value=cccccccc 05:16:58 SkyScan query 05:16:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:16:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:59 Parameters OK 05:16:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:59 Set A/D data flow result=40 05:16:59 Set A/D channel type result=40 05:16:59 Set A/D encoding result=40 05:16:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:59 Set channel filter=0.000000e+000 result=40 05:16:59 Config A/D Result=40 05:16:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:59 Get A/D filter: -9.255963e+061 result=40 05:16:59 Get A/D value=-858993460 result=40 05:16:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:59 Parameters OK 05:16:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:59 Set A/D data flow result=40 05:16:59 Set A/D channel type result=40 05:16:59 Set A/D encoding result=40 05:16:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:59 Set channel filter=0.000000e+000 result=40 05:16:59 Config A/D Result=40 05:16:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:59 Get A/D filter: -9.255963e+061 result=40 05:16:59 Get A/D value=-858993460 result=40 05:16:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:16:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:16:59 Aux= 05:16:59 Message to Camera, serial 54264 queued 05:17:35 Received message from Master: op=PointingHead serial=54277 05:17:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:17:35 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:17:36 Point started: ret=0 05:17:36 point_skyscan result=0 05:17:37 Check angles 05:17:37 SkyScan query 05:17:37 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 05:17:37 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 05:17:37 Check angles 05:17:37 SkyScan query 05:17:38 SkyScan query done: ret=0 az=126.495<-8433 ze=38.505<-9433 Statuses=0009 0008 05:17:38 Msec=750 True Az=126.495 Ze=38.505 Az status=0009 Ze status=0008 05:17:38 Check angles 05:17:38 SkyScan query 05:17:39 SkyScan query done: ret=0 az=143.85<-9590 ze=38.505<-9433 Statuses=0009 0008 05:17:39 Msec=1500 True Az=143.85 Ze=38.505 Az status=0009 Ze status=0008 05:17:39 Check angles 05:17:39 SkyScan query 05:17:39 SkyScan query done: ret=0 az=161.19<-10746 ze=38.505<-9433 Statuses=0009 0008 05:17:39 Msec=2250 True Az=161.19 Ze=38.505 Az status=0009 Ze status=0008 05:17:40 Check angles 05:17:40 SkyScan query 05:17:40 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 05:17:40 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 05:17:40 Check angles 05:17:40 SkyScan query 05:17:41 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:17:41 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:17:41 Message to Master queued w/err=0: serial=54277 error=0 05:17:46 Received message from Master: op=Filter serial=54278 05:17:46 Color wheel filter change from 0 to 0 05:17:46 FLIGetFilterPos err=0 currentPosition=0 05:17:46 FLIGetStepsRemaining err=0 RemainingSteps=0 05:17:46 Filter is already there-color wheel unchanged 05:17:46 Received message from Master: op=Shutter serial=54279 05:17:46 Shutter LASER close 05:17:46 Received message from Camera: op=State serial=54281 05:17:46 GetSingleValue result=40 Value=cccccccc 05:17:46 SkyScan query 05:17:47 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:17:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:47 Parameters OK 05:17:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:47 Set A/D data flow result=40 05:17:47 Set A/D channel type result=40 05:17:47 Set A/D encoding result=40 05:17:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:47 Set channel filter=0.000000e+000 result=40 05:17:47 Config A/D Result=40 05:17:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:47 Get A/D filter: -9.255963e+061 result=40 05:17:47 Get A/D value=-858993460 result=40 05:17:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:47 Parameters OK 05:17:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:47 Set A/D data flow result=40 05:17:47 Set A/D channel type result=40 05:17:47 Set A/D encoding result=40 05:17:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:47 Set channel filter=0.000000e+000 result=40 05:17:47 Config A/D Result=40 05:17:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:47 Get A/D filter: -9.255963e+061 result=40 05:17:47 Get A/D value=-858993460 result=40 05:17:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:17:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:17:47 Aux= 05:17:47 Message to Camera, serial 54281 queued 05:18:24 Received message from Master: op=PointingHead serial=54294 05:18:24 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:18:24 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:18:24 Point started: ret=0 05:18:24 point_skyscan result=0 05:18:25 Check angles 05:18:25 SkyScan query 05:18:25 SkyScan query done: ret=0 az=152.97<-10198 ze=8.775<-11415 Statuses=0009 0009 05:18:25 Msec=0 True Az=152.97 Ze=8.775 Az status=0009 Ze status=0009 05:18:25 Check angles 05:18:25 SkyScan query 05:18:26 SkyScan query done: ret=0 az=135.66<-9044 ze=-12.15<-12810 Statuses=0009 0009 05:18:26 Msec=750 True Az=135.66 Ze=-12.15 Az status=0009 Ze status=0009 05:18:26 Check angles 05:18:26 SkyScan query 05:18:27 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.09<-14206 Statuses=0009 0009 05:18:27 Msec=1500 True Az=118.02 Ze=-33.09 Az status=0009 Ze status=0009 05:18:27 Check angles 05:18:27 SkyScan query 05:18:27 SkyScan query done: ret=0 az=100.59<-6706 ze=-51.525<-15435 Statuses=0009 0009 05:18:27 Msec=2250 True Az=100.59 Ze=-51.525 Az status=0009 Ze status=0009 05:18:28 Check angles 05:18:28 SkyScan query 05:18:28 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 05:18:28 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 05:18:28 Check angles 05:18:28 SkyScan query 05:18:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:18:29 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:18:29 Message to Master queued w/err=0: serial=54294 error=0 05:18:34 Received message from Master: op=Filter serial=54295 05:18:34 Color wheel filter change from 0 to 0 05:18:34 FLIGetFilterPos err=0 currentPosition=0 05:18:34 FLIGetStepsRemaining err=0 RemainingSteps=0 05:18:34 Filter is already there-color wheel unchanged 05:18:34 Received message from Master: op=Shutter serial=54296 05:18:34 Shutter LASER close 05:18:34 Received message from Camera: op=State serial=54298 05:18:34 GetSingleValue result=40 Value=cccccccc 05:18:34 SkyScan query 05:18:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:18:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:35 Parameters OK 05:18:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:35 Set A/D data flow result=40 05:18:35 Set A/D channel type result=40 05:18:35 Set A/D encoding result=40 05:18:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:35 Set channel filter=0.000000e+000 result=40 05:18:35 Config A/D Result=40 05:18:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:35 Get A/D filter: -9.255963e+061 result=40 05:18:35 Get A/D value=-858993460 result=40 05:18:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:35 Parameters OK 05:18:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:35 Set A/D data flow result=40 05:18:35 Set A/D channel type result=40 05:18:35 Set A/D encoding result=40 05:18:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:35 Set channel filter=0.000000e+000 result=40 05:18:35 Config A/D Result=40 05:18:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:35 Get A/D filter: -9.255963e+061 result=40 05:18:35 Get A/D value=-858993460 result=40 05:18:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:18:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:18:35 Aux= 05:18:35 Message to Camera, serial 54298 queued 05:19:12 Received message from Master: op=PointingHead serial=54311 05:19:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:19:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:19:12 Point started: ret=0 05:19:12 point_skyscan result=0 05:19:13 Check angles 05:19:13 SkyScan query 05:19:13 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.525<-17435 Statuses=0009 0009 05:19:13 Msec=0 True Az=109.17 Ze=-81.525 Az status=0009 Ze status=0009 05:19:14 Check angles 05:19:14 SkyScan query 05:19:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.465<-18831 Statuses=0008 0009 05:19:14 Msec=750 True Az=112.995 Ze=-102.465 Az status=0008 Ze status=0009 05:19:14 Check angles 05:19:14 SkyScan query 05:19:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.435<-20229 Statuses=0008 0009 05:19:15 Msec=1500 True Az=112.995 Ze=-123.435 Az status=0008 Ze status=0009 05:19:15 Check angles 05:19:15 SkyScan query 05:19:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.36<-21624 Statuses=0008 0009 05:19:16 Msec=2250 True Az=112.995 Ze=-144.36 Az status=0008 Ze status=0009 05:19:16 Check angles 05:19:16 SkyScan query 05:19:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.33<-23022 Statuses=0008 0009 05:19:16 Msec=3000 True Az=112.995 Ze=-165.33 Az status=0008 Ze status=0009 05:19:17 Check angles 05:19:17 SkyScan query 05:19:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:19:17 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:19:17 Message to Master queued w/err=0: serial=54311 error=0 05:19:22 Received message from Master: op=Filter serial=54312 05:19:22 Color wheel filter change from 0 to 0 05:19:22 FLIGetFilterPos err=0 currentPosition=0 05:19:22 FLIGetStepsRemaining err=0 RemainingSteps=0 05:19:22 Filter is already there-color wheel unchanged 05:19:22 Received message from Master: op=Shutter serial=54313 05:19:22 Shutter LASER open 05:19:22 Received message from Camera: op=State serial=54315 05:19:22 GetSingleValue result=40 Value=cccccccc 05:19:22 SkyScan query 05:19:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:19:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:23 Parameters OK 05:19:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:23 Set A/D data flow result=40 05:19:23 Set A/D channel type result=40 05:19:23 Set A/D encoding result=40 05:19:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:23 Set channel filter=0.000000e+000 result=40 05:19:23 Config A/D Result=40 05:19:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:23 Get A/D filter: -9.255963e+061 result=40 05:19:23 Get A/D value=-858993460 result=40 05:19:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:23 Parameters OK 05:19:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:23 Set A/D data flow result=40 05:19:23 Set A/D channel type result=40 05:19:23 Set A/D encoding result=40 05:19:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:23 Set channel filter=0.000000e+000 result=40 05:19:23 Config A/D Result=40 05:19:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:23 Get A/D filter: -9.255963e+061 result=40 05:19:23 Get A/D value=-858993460 result=40 05:19:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:19:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:19:23 Aux= 05:19:23 Message to Camera, serial 54315 queued 05:19:31 Received message from Master: op=Shutter serial=54325 05:19:31 Shutter LASER close 05:19:32 Received message from Master: op=PointingHead serial=54329 05:19:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:19:32 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:19:32 Point started: ret=0 05:19:32 point_skyscan result=0 05:19:33 Check angles 05:19:33 SkyScan query 05:19:34 SkyScan query done: ret=0 az=89.67<-5978 ze=157.245<-1517 Statuses=0009 0009 05:19:34 Msec=0 True Az=89.67 Ze=157.245 Az status=0009 Ze status=0009 05:19:34 Check angles 05:19:34 SkyScan query 05:19:34 SkyScan query done: ret=0 az=71.85<-4790 ze=135.855<-2943 Statuses=0009 0009 05:19:34 Msec=750 True Az=71.85 Ze=135.855 Az status=0009 Ze status=0009 05:19:35 Check angles 05:19:35 SkyScan query 05:19:35 SkyScan query done: ret=0 az=54.6<-3640 ze=114.87<-4342 Statuses=0009 0009 05:19:35 Msec=1500 True Az=54.6 Ze=114.87 Az status=0009 Ze status=0009 05:19:35 Check angles 05:19:35 SkyScan query 05:19:36 SkyScan query done: ret=0 az=40.92<-2728 ze=93.93<-5738 Statuses=0009 0009 05:19:36 Msec=2250 True Az=40.92 Ze=93.93 Az status=0009 Ze status=0009 05:19:36 Check angles 05:19:36 SkyScan query 05:19:37 SkyScan query done: ret=0 az=40.995<-2733 ze=72.96<-7136 Statuses=0008 0009 05:19:37 Msec=3000 True Az=40.995 Ze=72.96 Az status=0008 Ze status=0009 05:19:37 Check angles 05:19:37 SkyScan query 05:19:37 SkyScan query done: ret=0 az=40.995<-2733 ze=52.56<-8496 Statuses=0008 0009 05:19:37 Msec=3750 True Az=40.995 Ze=52.56 Az status=0008 Ze status=0009 05:19:38 Check angles 05:19:38 SkyScan query 05:19:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:19:38 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:19:38 Message to Master queued w/err=0: serial=54329 error=0 05:19:43 Received message from Master: op=Filter serial=54330 05:19:43 Color wheel filter change from 0 to 0 05:19:43 FLIGetFilterPos err=0 currentPosition=0 05:19:43 FLIGetStepsRemaining err=0 RemainingSteps=0 05:19:43 Filter is already there-color wheel unchanged 05:19:43 Received message from Master: op=Shutter serial=54331 05:19:43 Shutter LASER close 05:19:43 Received message from Camera: op=State serial=54333 05:19:43 GetSingleValue result=40 Value=cccccccc 05:19:43 SkyScan query 05:19:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:19:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:44 Parameters OK 05:19:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:44 Set A/D data flow result=40 05:19:44 Set A/D channel type result=40 05:19:44 Set A/D encoding result=40 05:19:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:44 Set channel filter=0.000000e+000 result=40 05:19:44 Config A/D Result=40 05:19:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:44 Get A/D filter: -9.255963e+061 result=40 05:19:44 Get A/D value=-858993460 result=40 05:19:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:44 Parameters OK 05:19:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:44 Set A/D data flow result=40 05:19:44 Set A/D channel type result=40 05:19:44 Set A/D encoding result=40 05:19:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:44 Set channel filter=0.000000e+000 result=40 05:19:44 Config A/D Result=40 05:19:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:44 Get A/D filter: -9.255963e+061 result=40 05:19:44 Get A/D value=-858993460 result=40 05:19:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:19:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:19:44 Aux= 05:19:44 Message to Camera, serial 54333 queued 05:20:21 Received message from Master: op=PointingHead serial=54346 05:20:21 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:20:21 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:20:21 Point started: ret=0 05:20:21 point_skyscan result=0 05:20:22 Check angles 05:20:22 SkyScan query 05:20:23 SkyScan query done: ret=0 az=64.44<-4296 ze=66.555<-7563 Statuses=0009 0008 05:20:23 Msec=0 True Az=64.44 Ze=66.555 Az status=0009 Ze status=0008 05:20:23 Check angles 05:20:23 SkyScan query 05:20:23 SkyScan query done: ret=0 az=81.78<-5452 ze=66.495<-7567 Statuses=0009 0008 05:20:23 Msec=750 True Az=81.78 Ze=66.495 Az status=0009 Ze status=0008 05:20:23 Check angles 05:20:23 SkyScan query 05:20:24 SkyScan query done: ret=0 az=99.39<-6626 ze=66.495<-7567 Statuses=0009 0008 05:20:24 Msec=1500 True Az=99.39 Ze=66.495 Az status=0009 Ze status=0008 05:20:24 Check angles 05:20:24 SkyScan query 05:20:25 SkyScan query done: ret=0 az=116.94<-7796 ze=66.495<-7567 Statuses=0009 0008 05:20:25 Msec=2250 True Az=116.94 Ze=66.495 Az status=0009 Ze status=0008 05:20:25 Check angles 05:20:25 SkyScan query 05:20:26 SkyScan query done: ret=0 az=134.37<-8958 ze=66.495<-7567 Statuses=0009 0008 05:20:26 Msec=3000 True Az=134.37 Ze=66.495 Az status=0009 Ze status=0008 05:20:26 Check angles 05:20:26 SkyScan query 05:20:26 SkyScan query done: ret=0 az=151.86<-10124 ze=66.495<-7567 Statuses=0009 0008 05:20:26 Msec=3750 True Az=151.86 Ze=66.495 Az status=0009 Ze status=0008 05:20:26 Check angles 05:20:26 SkyScan query 05:20:27 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 05:20:27 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 05:20:27 Message to Master queued w/err=0: serial=54346 error=0 05:20:32 Received message from Master: op=Filter serial=54347 05:20:32 Color wheel filter change from 0 to 0 05:20:32 FLIGetFilterPos err=0 currentPosition=0 05:20:32 FLIGetStepsRemaining err=0 RemainingSteps=0 05:20:32 Filter is already there-color wheel unchanged 05:20:32 Received message from Master: op=Shutter serial=54348 05:20:32 Shutter LASER close 05:20:32 Received message from Camera: op=State serial=54350 05:20:32 GetSingleValue result=40 Value=cccccccc 05:20:32 SkyScan query 05:20:33 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:20:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:33 Parameters OK 05:20:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:33 Set A/D data flow result=40 05:20:33 Set A/D channel type result=40 05:20:33 Set A/D encoding result=40 05:20:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:33 Set channel filter=0.000000e+000 result=40 05:20:33 Config A/D Result=40 05:20:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:33 Get A/D filter: -9.255963e+061 result=40 05:20:33 Get A/D value=-858993460 result=40 05:20:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:33 Parameters OK 05:20:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:33 Set A/D data flow result=40 05:20:33 Set A/D channel type result=40 05:20:33 Set A/D encoding result=40 05:20:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:33 Set channel filter=0.000000e+000 result=40 05:20:33 Config A/D Result=40 05:20:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:33 Get A/D filter: -9.255963e+061 result=40 05:20:33 Get A/D value=-858993460 result=40 05:20:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:33 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:20:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:20:33 Aux= 05:20:33 Message to Camera, serial 54350 queued 05:21:10 Received message from Master: op=PointingHead serial=54363 05:21:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:21:10 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:21:10 Point started: ret=0 05:21:10 point_skyscan result=0 05:21:11 Check angles 05:21:11 SkyScan query 05:21:11 SkyScan query done: ret=0 az=134.805<-8987 ze=36.495<-9567 Statuses=0009 0009 05:21:11 Msec=0 True Az=134.805 Ze=36.495 Az status=0009 Ze status=0009 05:21:12 Check angles 05:21:12 SkyScan query 05:21:12 SkyScan query done: ret=0 az=117.39<-7826 ze=15.66<-10956 Statuses=0009 0009 05:21:12 Msec=750 True Az=117.39 Ze=15.66 Az status=0009 Ze status=0009 05:21:12 Check angles 05:21:12 SkyScan query 05:21:13 SkyScan query done: ret=0 az=100.05<-6670 ze=-5.325<-12355 Statuses=0009 0009 05:21:13 Msec=1500 True Az=100.05 Ze=-5.325 Az status=0009 Ze status=0009 05:21:13 Check angles 05:21:13 SkyScan query 05:21:14 SkyScan query done: ret=0 az=82.17<-5478 ze=-26.67<-13778 Statuses=0009 0009 05:21:14 Msec=2250 True Az=82.17 Ze=-26.67 Az status=0009 Ze status=0009 05:21:14 Check angles 05:21:14 SkyScan query 05:21:14 SkyScan query done: ret=0 az=64.575<-4305 ze=-38.565<-14571 Statuses=0009 0008 05:21:14 Msec=3000 True Az=64.575 Ze=-38.565 Az status=0009 Ze status=0008 05:21:15 Check angles 05:21:15 SkyScan query 05:21:15 SkyScan query done: ret=0 az=47.13<-3142 ze=-38.535<-14569 Statuses=0009 0008 05:21:15 Msec=3750 True Az=47.13 Ze=-38.535 Az status=0009 Ze status=0008 05:21:15 Check angles 05:21:15 SkyScan query 05:21:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:21:16 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:21:16 Message to Master queued w/err=0: serial=54363 error=0 05:21:21 Received message from Master: op=Filter serial=54364 05:21:21 Color wheel filter change from 0 to 0 05:21:21 FLIGetFilterPos err=0 currentPosition=0 05:21:21 FLIGetStepsRemaining err=0 RemainingSteps=0 05:21:21 Filter is already there-color wheel unchanged 05:21:21 Received message from Master: op=Shutter serial=54365 05:21:21 Shutter LASER close 05:21:21 Received message from Camera: op=State serial=54367 05:21:21 GetSingleValue result=40 Value=cccccccc 05:21:21 SkyScan query 05:21:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:21:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:22 Parameters OK 05:21:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:22 Set A/D data flow result=40 05:21:22 Set A/D channel type result=40 05:21:22 Set A/D encoding result=40 05:21:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:22 Set channel filter=0.000000e+000 result=40 05:21:22 Config A/D Result=40 05:21:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:22 Get A/D filter: -9.255963e+061 result=40 05:21:22 Get A/D value=-858993460 result=40 05:21:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:22 Parameters OK 05:21:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:22 Set A/D data flow result=40 05:21:22 Set A/D channel type result=40 05:21:22 Set A/D encoding result=40 05:21:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:22 Set channel filter=0.000000e+000 result=40 05:21:22 Config A/D Result=40 05:21:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:22 Get A/D filter: -9.255963e+061 result=40 05:21:22 Get A/D value=-858993460 result=40 05:21:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:21:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:21:22 Aux= 05:21:22 Message to Camera, serial 54367 queued 05:21:59 Received message from Master: op=PointingHead serial=54380 05:21:59 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:21:59 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:21:59 Point started: ret=0 05:21:59 point_skyscan result=0 05:22:00 Check angles 05:22:00 SkyScan query 05:22:00 SkyScan query done: ret=0 az=64.26<-4284 ze=-68.58<-16572 Statuses=0009 0009 05:22:00 Msec=0 True Az=64.26 Ze=-68.58 Az status=0009 Ze status=0009 05:22:00 Check angles 05:22:00 SkyScan query 05:22:01 SkyScan query done: ret=0 az=81.63<-5442 ze=-89.55<-17970 Statuses=0009 0009 05:22:01 Msec=750 True Az=81.63 Ze=-89.55 Az status=0009 Ze status=0009 05:22:01 Check angles 05:22:01 SkyScan query 05:22:02 SkyScan query done: ret=0 az=99.21<-6614 ze=-110.505<-19367 Statuses=0009 0009 05:22:02 Msec=1500 True Az=99.21 Ze=-110.505 Az status=0009 Ze status=0009 05:22:02 Check angles 05:22:02 SkyScan query 05:22:02 SkyScan query done: ret=0 az=117.195<-7813 ze=-131.88<-20792 Statuses=0009 0009 05:22:02 Msec=2250 True Az=117.195 Ze=-131.88 Az status=0009 Ze status=0009 05:22:03 Check angles 05:22:03 SkyScan query 05:22:03 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 05:22:03 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 05:22:03 Check angles 05:22:03 SkyScan query 05:22:04 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:22:04 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:22:04 Message to Master queued w/err=0: serial=54380 error=0 05:22:09 Received message from Master: op=Filter serial=54381 05:22:09 Color wheel filter change from 0 to 0 05:22:09 FLIGetFilterPos err=0 currentPosition=0 05:22:09 FLIGetStepsRemaining err=0 RemainingSteps=0 05:22:09 Filter is already there-color wheel unchanged 05:22:09 Received message from Master: op=Shutter serial=54382 05:22:09 Shutter LASER close 05:22:09 Received message from Camera: op=State serial=54384 05:22:09 GetSingleValue result=40 Value=cccccccc 05:22:09 SkyScan query 05:22:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:22:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:10 Parameters OK 05:22:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:10 Set A/D data flow result=40 05:22:10 Set A/D channel type result=40 05:22:10 Set A/D encoding result=40 05:22:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:10 Set channel filter=0.000000e+000 result=40 05:22:10 Config A/D Result=40 05:22:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:10 Get A/D filter: -9.255963e+061 result=40 05:22:10 Get A/D value=-858993460 result=40 05:22:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:10 Parameters OK 05:22:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:10 Set A/D data flow result=40 05:22:10 Set A/D channel type result=40 05:22:10 Set A/D encoding result=40 05:22:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:10 Set channel filter=0.000000e+000 result=40 05:22:10 Config A/D Result=40 05:22:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:10 Get A/D filter: -9.255963e+061 result=40 05:22:10 Get A/D value=-858993460 result=40 05:22:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:10 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:22:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:22:10 Aux= 05:22:10 Message to Camera, serial 54384 queued 05:22:47 Received message from Master: op=PointingHead serial=54397 05:22:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:22:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:22:47 Point started: ret=0 05:22:47 point_skyscan result=0 05:22:48 Check angles 05:22:48 SkyScan query 05:22:48 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.105<-23407 Statuses=0009 0009 05:22:48 Msec=0 True Az=113.01 Ze=-171.105 Az status=0009 Ze status=0009 05:22:49 Check angles 05:22:49 SkyScan query 05:22:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:22:49 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:22:49 Message to Master queued w/err=0: serial=54397 error=0 05:22:54 Received message from Master: op=Filter serial=54398 05:22:54 Color wheel filter change from 0 to 0 05:22:54 FLIGetFilterPos err=0 currentPosition=0 05:22:54 FLIGetStepsRemaining err=0 RemainingSteps=0 05:22:54 Filter is already there-color wheel unchanged 05:22:54 Received message from Master: op=Shutter serial=54399 05:22:54 Shutter LASER open 05:22:54 Received message from Camera: op=State serial=54401 05:22:54 GetSingleValue result=40 Value=cccccccc 05:22:54 SkyScan query 05:22:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:22:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:55 Parameters OK 05:22:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:55 Set A/D data flow result=40 05:22:55 Set A/D channel type result=40 05:22:55 Set A/D encoding result=40 05:22:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:55 Set channel filter=0.000000e+000 result=40 05:22:55 Config A/D Result=40 05:22:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:55 Get A/D filter: -9.255963e+061 result=40 05:22:55 Get A/D value=-858993460 result=40 05:22:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:55 Parameters OK 05:22:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:55 Set A/D data flow result=40 05:22:55 Set A/D channel type result=40 05:22:55 Set A/D encoding result=40 05:22:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:55 Set channel filter=0.000000e+000 result=40 05:22:55 Config A/D Result=40 05:22:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:55 Get A/D filter: -9.255963e+061 result=40 05:22:55 Get A/D value=-858993460 result=40 05:22:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:22:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:22:55 Aux= 05:22:55 Message to Camera, serial 54401 queued 05:23:03 Received message from Master: op=Shutter serial=54411 05:23:03 Shutter LASER close 05:23:04 Received message from Master: op=PointingHead serial=54415 05:23:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:23:04 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:23:04 Point started: ret=0 05:23:04 point_skyscan result=0 05:23:05 Check angles 05:23:05 SkyScan query 05:23:06 SkyScan query done: ret=0 az=135.81<-9054 ze=-143.49<-21566 Statuses=0009 0009 05:23:06 Msec=0 True Az=135.81 Ze=-143.49 Az status=0009 Ze status=0009 05:23:06 Check angles 05:23:06 SkyScan query 05:23:06 SkyScan query done: ret=0 az=153.345<-10223 ze=-122.535<-20169 Statuses=0009 0009 05:23:06 Msec=750 True Az=153.345 Ze=-122.535 Az status=0009 Ze status=0009 05:23:07 Check angles 05:23:07 SkyScan query 05:23:07 SkyScan query done: ret=0 az=170.745<-11383 ze=-101.61<-18774 Statuses=0009 0009 05:23:07 Msec=1500 True Az=170.745 Ze=-101.61 Az status=0009 Ze status=0009 05:23:07 Check angles 05:23:07 SkyScan query 05:23:08 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.58<-17372 Statuses=0008 0009 05:23:08 Msec=2250 True Az=176.025 Ze=-80.58 Az status=0008 Ze status=0009 05:23:08 Check angles 05:23:08 SkyScan query 05:23:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.22<-15948 Statuses=0008 0009 05:23:09 Msec=3000 True Az=175.995 Ze=-59.22 Az status=0008 Ze status=0009 05:23:09 Check angles 05:23:09 SkyScan query 05:23:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:23:09 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:23:09 Message to Master queued w/err=0: serial=54415 error=0 05:23:14 Received message from Master: op=Filter serial=54416 05:23:14 Color wheel filter change from 0 to 0 05:23:14 FLIGetFilterPos err=0 currentPosition=0 05:23:14 FLIGetStepsRemaining err=0 RemainingSteps=0 05:23:14 Filter is already there-color wheel unchanged 05:23:15 Received message from Master: op=Shutter serial=54417 05:23:15 Shutter LASER close 05:23:15 Received message from Camera: op=State serial=54419 05:23:15 GetSingleValue result=40 Value=cccccccc 05:23:15 SkyScan query 05:23:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:23:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:15 Parameters OK 05:23:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:15 Set A/D data flow result=40 05:23:15 Set A/D channel type result=40 05:23:15 Set A/D encoding result=40 05:23:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:15 Set channel filter=0.000000e+000 result=40 05:23:15 Config A/D Result=40 05:23:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:15 Get A/D filter: -9.255963e+061 result=40 05:23:15 Get A/D value=-858993460 result=40 05:23:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:15 Parameters OK 05:23:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:15 Set A/D data flow result=40 05:23:15 Set A/D channel type result=40 05:23:15 Set A/D encoding result=40 05:23:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:15 Set channel filter=0.000000e+000 result=40 05:23:15 Config A/D Result=40 05:23:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:15 Get A/D filter: -9.255963e+061 result=40 05:23:15 Get A/D value=-858993460 result=40 05:23:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:23:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:23:15 Aux= 05:23:15 Message to Camera, serial 54419 queued 05:23:52 Received message from Master: op=PointingHead serial=54432 05:23:52 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:23:52 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:23:53 Point started: ret=0 05:23:53 point_skyscan result=0 05:23:53 Check angles 05:23:53 SkyScan query 05:23:54 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.645<-13443 Statuses=0009 0009 05:23:54 Msec=0 True Az=152.94 Ze=-21.645 Az status=0009 Ze status=0009 05:23:54 Check angles 05:23:54 SkyScan query 05:23:55 SkyScan query done: ret=0 az=135.525<-9035 ze=-0.645<-12043 Statuses=0009 0009 05:23:55 Msec=750 True Az=135.525 Ze=-0.645 Az status=0009 Ze status=0009 05:23:55 Check angles 05:23:55 SkyScan query 05:23:55 SkyScan query done: ret=0 az=117.51<-7834 ze=20.715<-10619 Statuses=0009 0009 05:23:55 Msec=1500 True Az=117.51 Ze=20.715 Az status=0009 Ze status=0009 05:23:56 Check angles 05:23:56 SkyScan query 05:23:56 SkyScan query done: ret=0 az=99.81<-6654 ze=42.12<-9192 Statuses=0009 0009 05:23:56 Msec=2250 True Az=99.81 Ze=42.12 Az status=0009 Ze status=0009 05:23:56 Check angles 05:23:56 SkyScan query 05:23:57 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 05:23:57 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 05:23:57 Check angles 05:23:57 SkyScan query 05:23:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:23:58 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:23:58 Message to Master queued w/err=0: serial=54432 error=0 05:24:03 Received message from Master: op=Filter serial=54433 05:24:03 Color wheel filter change from 0 to 0 05:24:03 FLIGetFilterPos err=0 currentPosition=0 05:24:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:24:03 Filter is already there-color wheel unchanged 05:24:03 Received message from Master: op=Shutter serial=54434 05:24:03 Shutter LASER close 05:24:03 Received message from Camera: op=State serial=54436 05:24:03 GetSingleValue result=40 Value=cccccccc 05:24:03 SkyScan query 05:24:04 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:24:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:04 Parameters OK 05:24:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:04 Set A/D data flow result=40 05:24:04 Set A/D channel type result=40 05:24:04 Set A/D encoding result=40 05:24:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:04 Set channel filter=0.000000e+000 result=40 05:24:04 Config A/D Result=40 05:24:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:04 Get A/D filter: -9.255963e+061 result=40 05:24:04 Get A/D value=-858993460 result=40 05:24:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:04 Parameters OK 05:24:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:04 Set A/D data flow result=40 05:24:04 Set A/D channel type result=40 05:24:04 Set A/D encoding result=40 05:24:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:04 Set channel filter=0.000000e+000 result=40 05:24:04 Config A/D Result=40 05:24:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:04 Get A/D filter: -9.255963e+061 result=40 05:24:04 Get A/D value=-858993460 result=40 05:24:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:04 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:24:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:24:04 Aux= 05:24:04 Message to Camera, serial 54436 queued 05:24:40 Received message from Master: op=PointingHead serial=54449 05:24:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:24:40 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:24:41 Point started: ret=0 05:24:41 point_skyscan result=0 05:24:41 Check angles 05:24:41 SkyScan query 05:24:42 SkyScan query done: ret=0 az=108.765<-7251 ze=38.49<-9434 Statuses=0009 0008 05:24:42 Msec=0 True Az=108.765 Ze=38.49 Az status=0009 Ze status=0008 05:24:42 Check angles 05:24:42 SkyScan query 05:24:43 SkyScan query done: ret=0 az=126.3<-8420 ze=38.505<-9433 Statuses=0009 0008 05:24:43 Msec=750 True Az=126.3 Ze=38.505 Az status=0009 Ze status=0008 05:24:43 Check angles 05:24:43 SkyScan query 05:24:44 SkyScan query done: ret=0 az=143.67<-9578 ze=38.505<-9433 Statuses=0009 0008 05:24:44 Msec=1500 True Az=143.67 Ze=38.505 Az status=0009 Ze status=0008 05:24:44 Check angles 05:24:44 SkyScan query 05:24:44 SkyScan query done: ret=0 az=161.04<-10736 ze=38.505<-9433 Statuses=0009 0008 05:24:44 Msec=2250 True Az=161.04 Ze=38.505 Az status=0009 Ze status=0008 05:24:44 Check angles 05:24:44 SkyScan query 05:24:45 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 05:24:45 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 05:24:45 Check angles 05:24:45 SkyScan query 05:24:46 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:24:46 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:24:46 Message to Master queued w/err=0: serial=54449 error=0 05:24:51 Received message from Master: op=Filter serial=54450 05:24:51 Color wheel filter change from 0 to 0 05:24:51 FLIGetFilterPos err=0 currentPosition=0 05:24:51 FLIGetStepsRemaining err=0 RemainingSteps=0 05:24:51 Filter is already there-color wheel unchanged 05:24:51 Received message from Master: op=Shutter serial=54451 05:24:51 Shutter LASER close 05:24:51 Received message from Camera: op=State serial=54453 05:24:51 GetSingleValue result=40 Value=cccccccc 05:24:51 SkyScan query 05:24:52 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:24:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:52 Parameters OK 05:24:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:52 Set A/D data flow result=40 05:24:52 Set A/D channel type result=40 05:24:52 Set A/D encoding result=40 05:24:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:52 Set channel filter=0.000000e+000 result=40 05:24:52 Config A/D Result=40 05:24:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:52 Get A/D filter: -9.255963e+061 result=40 05:24:52 Get A/D value=-858993460 result=40 05:24:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:52 Parameters OK 05:24:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:52 Set A/D data flow result=40 05:24:52 Set A/D channel type result=40 05:24:52 Set A/D encoding result=40 05:24:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:52 Set channel filter=0.000000e+000 result=40 05:24:52 Config A/D Result=40 05:24:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:52 Get A/D filter: -9.255963e+061 result=40 05:24:52 Get A/D value=-858993460 result=40 05:24:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:24:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:24:52 Aux= 05:24:52 Message to Camera, serial 54453 queued 05:25:28 Received message from Master: op=PointingHead serial=54466 05:25:28 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:25:28 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:25:29 Point started: ret=0 05:25:29 point_skyscan result=0 05:25:30 Check angles 05:25:30 SkyScan query 05:25:30 SkyScan query done: ret=0 az=152.805<-10187 ze=8.325<-11445 Statuses=0009 0009 05:25:30 Msec=0 True Az=152.805 Ze=8.325 Az status=0009 Ze status=0009 05:25:30 Check angles 05:25:30 SkyScan query 05:25:31 SkyScan query done: ret=0 az=135.24<-9016 ze=-12.6<-12840 Statuses=0009 0009 05:25:31 Msec=750 True Az=135.24 Ze=-12.6 Az status=0009 Ze status=0009 05:25:31 Check angles 05:25:31 SkyScan query 05:25:32 SkyScan query done: ret=0 az=117.735<-7849 ze=-33.555<-14237 Statuses=0009 0009 05:25:32 Msec=1500 True Az=117.735 Ze=-33.555 Az status=0009 Ze status=0009 05:25:32 Check angles 05:25:32 SkyScan query 05:25:32 SkyScan query done: ret=0 az=100.305<-6687 ze=-51.555<-15437 Statuses=0009 0009 05:25:32 Msec=2250 True Az=100.305 Ze=-51.555 Az status=0009 Ze status=0009 05:25:33 Check angles 05:25:33 SkyScan query 05:25:33 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 05:25:33 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 05:25:33 Check angles 05:25:33 SkyScan query 05:25:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:25:34 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:25:34 Message to Master queued w/err=0: serial=54466 error=0 05:25:39 Received message from Master: op=Filter serial=54467 05:25:39 Color wheel filter change from 0 to 0 05:25:39 FLIGetFilterPos err=0 currentPosition=0 05:25:39 FLIGetStepsRemaining err=0 RemainingSteps=0 05:25:39 Filter is already there-color wheel unchanged 05:25:39 Received message from Master: op=Shutter serial=54468 05:25:39 Shutter LASER close 05:25:39 Received message from Camera: op=State serial=54470 05:25:39 GetSingleValue result=40 Value=cccccccc 05:25:39 SkyScan query 05:25:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:25:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:40 Parameters OK 05:25:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:40 Set A/D data flow result=40 05:25:40 Set A/D channel type result=40 05:25:40 Set A/D encoding result=40 05:25:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:40 Set channel filter=0.000000e+000 result=40 05:25:40 Config A/D Result=40 05:25:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:40 Get A/D filter: -9.255963e+061 result=40 05:25:40 Get A/D value=-858993460 result=40 05:25:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:40 Parameters OK 05:25:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:40 Set A/D data flow result=40 05:25:40 Set A/D channel type result=40 05:25:40 Set A/D encoding result=40 05:25:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:40 Set channel filter=0.000000e+000 result=40 05:25:40 Config A/D Result=40 05:25:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:40 Get A/D filter: -9.255963e+061 result=40 05:25:40 Get A/D value=-858993460 result=40 05:25:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:25:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:25:40 Aux= 05:25:40 Message to Camera, serial 54470 queued 05:26:17 Received message from Master: op=PointingHead serial=54483 05:26:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:26:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 [UTC 2018-12-11 05:26:17] 05:26:17 Point started: ret=0 05:26:17 point_skyscan result=0 05:26:18 Check angles 05:26:18 SkyScan query 05:26:18 SkyScan query done: ret=0 az=110.52<-7368 ze=-83.175<-17545 Statuses=0009 0009 05:26:18 Msec=0 True Az=110.52 Ze=-83.175 Az status=0009 Ze status=0009 05:26:18 Check angles 05:26:18 SkyScan query 05:26:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-104.13<-18942 Statuses=0008 0009 05:26:19 Msec=750 True Az=112.995 Ze=-104.13 Az status=0008 Ze status=0009 05:26:19 Check angles 05:26:19 SkyScan query 05:26:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-125.1<-20340 Statuses=0008 0009 05:26:20 Msec=1500 True Az=112.995 Ze=-125.1 Az status=0008 Ze status=0009 05:26:20 Check angles 05:26:20 SkyScan query 05:26:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-146.055<-21737 Statuses=0008 0009 05:26:21 Msec=2250 True Az=112.995 Ze=-146.055 Az status=0008 Ze status=0009 05:26:21 Check angles 05:26:21 SkyScan query 05:26:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-167.025<-23135 Statuses=0008 0009 05:26:21 Msec=3000 True Az=112.995 Ze=-167.025 Az status=0008 Ze status=0009 05:26:21 Check angles 05:26:21 SkyScan query 05:26:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:26:22 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:26:22 Message to Master queued w/err=0: serial=54483 error=0 05:26:27 Received message from Master: op=Filter serial=54484 05:26:27 Color wheel filter change from 0 to 0 05:26:27 FLIGetFilterPos err=0 currentPosition=0 05:26:27 FLIGetStepsRemaining err=0 RemainingSteps=0 05:26:27 Filter is already there-color wheel unchanged 05:26:27 Received message from Master: op=Shutter serial=54485 05:26:27 Shutter LASER open 05:26:27 Received message from Camera: op=State serial=54487 05:26:27 GetSingleValue result=40 Value=cccccccc 05:26:27 SkyScan query 05:26:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:26:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:28 Parameters OK 05:26:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:28 Set A/D data flow result=40 05:26:28 Set A/D channel type result=40 05:26:28 Set A/D encoding result=40 05:26:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:28 Set channel filter=0.000000e+000 result=40 05:26:28 Config A/D Result=40 05:26:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:28 Get A/D filter: -9.255963e+061 result=40 05:26:28 Get A/D value=-858993460 result=40 05:26:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:28 Parameters OK 05:26:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:28 Set A/D data flow result=40 05:26:28 Set A/D channel type result=40 05:26:28 Set A/D encoding result=40 05:26:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:28 Set channel filter=0.000000e+000 result=40 05:26:28 Config A/D Result=40 05:26:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:28 Get A/D filter: -9.255963e+061 result=40 05:26:28 Get A/D value=-858993460 result=40 05:26:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:26:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:26:28 Aux= 05:26:28 Message to Camera, serial 54487 queued 05:26:36 Received message from Master: op=Shutter serial=54497 05:26:36 Shutter LASER close 05:26:37 Received message from Master: op=PointingHead serial=54501 05:26:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:26:37 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:26:37 Point started: ret=0 05:26:37 point_skyscan result=0 05:26:38 Check angles 05:26:38 SkyScan query 05:26:38 SkyScan query done: ret=0 az=89.67<-5978 ze=157.17<-1522 Statuses=0009 0009 05:26:38 Msec=0 True Az=89.67 Ze=157.17 Az status=0009 Ze status=0009 05:26:39 Check angles 05:26:39 SkyScan query 05:26:39 SkyScan query done: ret=0 az=71.82<-4788 ze=135.78<-2948 Statuses=0009 0009 05:26:39 Msec=750 True Az=71.82 Ze=135.78 Az status=0009 Ze status=0009 05:26:39 Check angles 05:26:39 SkyScan query 05:26:40 SkyScan query done: ret=0 az=54.615<-3641 ze=114.81<-4346 Statuses=0009 0009 05:26:40 Msec=1500 True Az=54.615 Ze=114.81 Az status=0009 Ze status=0009 05:26:40 Check angles 05:26:40 SkyScan query 05:26:41 SkyScan query done: ret=0 az=40.92<-2728 ze=93.855<-5743 Statuses=0009 0009 05:26:41 Msec=2250 True Az=40.92 Ze=93.855 Az status=0009 Ze status=0009 05:26:41 Check angles 05:26:41 SkyScan query 05:26:42 SkyScan query done: ret=0 az=40.995<-2733 ze=72.885<-7141 Statuses=0008 0009 05:26:42 Msec=3000 True Az=40.995 Ze=72.885 Az status=0008 Ze status=0009 05:26:42 Check angles 05:26:42 SkyScan query 05:26:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.515<-8499 Statuses=0008 0009 05:26:42 Msec=3750 True Az=40.995 Ze=52.515 Az status=0008 Ze status=0009 05:26:42 Check angles 05:26:42 SkyScan query 05:26:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:26:43 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:26:43 Message to Master queued w/err=0: serial=54501 error=0 05:26:48 Received message from Master: op=Filter serial=54502 05:26:48 Color wheel filter change from 0 to 0 05:26:48 FLIGetFilterPos err=0 currentPosition=0 05:26:48 FLIGetStepsRemaining err=0 RemainingSteps=0 05:26:48 Filter is already there-color wheel unchanged 05:26:48 Received message from Master: op=Shutter serial=54503 05:26:48 Shutter LASER close 05:26:48 Received message from Camera: op=State serial=54505 05:26:48 GetSingleValue result=40 Value=cccccccc 05:26:48 SkyScan query 05:26:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:26:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:49 Parameters OK 05:26:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:49 Set A/D data flow result=40 05:26:49 Set A/D channel type result=40 05:26:49 Set A/D encoding result=40 05:26:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:49 Set channel filter=0.000000e+000 result=40 05:26:49 Config A/D Result=40 05:26:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:49 Get A/D filter: -9.255963e+061 result=40 05:26:49 Get A/D value=-858993460 result=40 05:26:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:49 Parameters OK 05:26:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:49 Set A/D data flow result=40 05:26:49 Set A/D channel type result=40 05:26:49 Set A/D encoding result=40 05:26:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:49 Set channel filter=0.000000e+000 result=40 05:26:49 Config A/D Result=40 05:26:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:49 Get A/D filter: -9.255963e+061 result=40 05:26:49 Get A/D value=-858993460 result=40 05:26:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:26:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:26:49 Aux= 05:26:49 Message to Camera, serial 54505 queued 05:27:25 Received message from Master: op=PointingHead serial=54517 05:27:25 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:27:25 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:27:25 Point started: ret=0 05:27:25 point_skyscan result=0 05:27:26 Check angles 05:27:26 SkyScan query 05:27:27 SkyScan query done: ret=0 az=64.065<-4271 ze=66.555<-7563 Statuses=0009 0008 05:27:27 Msec=0 True Az=64.065 Ze=66.555 Az status=0009 Ze status=0008 05:27:27 Check angles 05:27:27 SkyScan query 05:27:27 SkyScan query done: ret=0 az=81.525<-5435 ze=66.495<-7567 Statuses=0009 0008 05:27:27 Msec=750 True Az=81.525 Ze=66.495 Az status=0009 Ze status=0008 05:27:27 Check angles 05:27:27 SkyScan query 05:27:28 SkyScan query done: ret=0 az=98.97<-6598 ze=66.495<-7567 Statuses=0009 0008 05:27:28 Msec=1500 True Az=98.97 Ze=66.495 Az status=0009 Ze status=0008 05:27:28 Check angles 05:27:28 SkyScan query 05:27:29 SkyScan query done: ret=0 az=116.685<-7779 ze=66.495<-7567 Statuses=0009 0008 05:27:29 Msec=2250 True Az=116.685 Ze=66.495 Az status=0009 Ze status=0008 05:27:29 Check angles 05:27:29 SkyScan query 05:27:30 SkyScan query done: ret=0 az=134.085<-8939 ze=66.495<-7567 Statuses=0009 0008 05:27:30 Msec=3000 True Az=134.085 Ze=66.495 Az status=0009 Ze status=0008 05:27:30 Check angles 05:27:30 SkyScan query 05:27:30 SkyScan query done: ret=0 az=151.47<-10098 ze=66.495<-7567 Statuses=0009 0008 05:27:30 Msec=3750 True Az=151.47 Ze=66.495 Az status=0009 Ze status=0008 05:27:30 Check angles 05:27:30 SkyScan query 05:27:31 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 05:27:31 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 05:27:31 Message to Master queued w/err=0: serial=54517 error=0 05:27:36 Received message from Master: op=Filter serial=54518 05:27:36 Color wheel filter change from 0 to 0 05:27:36 FLIGetFilterPos err=0 currentPosition=0 05:27:36 FLIGetStepsRemaining err=0 RemainingSteps=0 05:27:36 Filter is already there-color wheel unchanged 05:27:36 Received message from Master: op=Shutter serial=54519 05:27:36 Shutter LASER close 05:27:36 Received message from Camera: op=State serial=54521 05:27:36 GetSingleValue result=40 Value=cccccccc 05:27:36 SkyScan query 05:27:37 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:27:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:37 Parameters OK 05:27:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:37 Set A/D data flow result=40 05:27:37 Set A/D channel type result=40 05:27:37 Set A/D encoding result=40 05:27:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:37 Set channel filter=0.000000e+000 result=40 05:27:37 Config A/D Result=40 05:27:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:37 Get A/D filter: -9.255963e+061 result=40 05:27:37 Get A/D value=-858993460 result=40 05:27:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:37 Parameters OK 05:27:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:37 Set A/D data flow result=40 05:27:37 Set A/D channel type result=40 05:27:37 Set A/D encoding result=40 05:27:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:37 Set channel filter=0.000000e+000 result=40 05:27:37 Config A/D Result=40 05:27:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:37 Get A/D filter: -9.255963e+061 result=40 05:27:37 Get A/D value=-858993460 result=40 05:27:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:37 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:27:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:27:37 Aux= 05:27:37 Message to Camera, serial 54521 queued 05:28:14 Received message from Master: op=PointingHead serial=54534 05:28:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:28:14 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:28:14 Point started: ret=0 05:28:14 point_skyscan result=0 05:28:15 Check angles 05:28:15 SkyScan query 05:28:15 SkyScan query done: ret=0 az=134.565<-8971 ze=36.24<-9584 Statuses=0009 0009 05:28:15 Msec=0 True Az=134.565 Ze=36.24 Az status=0009 Ze status=0009 05:28:16 Check angles 05:28:16 SkyScan query 05:28:16 SkyScan query done: ret=0 az=117.18<-7812 ze=15.33<-10978 Statuses=0009 0009 05:28:16 Msec=750 True Az=117.18 Ze=15.33 Az status=0009 Ze status=0009 05:28:16 Check angles 05:28:16 SkyScan query 05:28:17 SkyScan query done: ret=0 az=99.405<-6627 ze=-6.09<-12406 Statuses=0009 0009 05:28:17 Msec=1500 True Az=99.405 Ze=-6.09 Az status=0009 Ze status=0009 05:28:17 Check angles 05:28:17 SkyScan query 05:28:18 SkyScan query done: ret=0 az=81.99<-5466 ze=-27.06<-13804 Statuses=0009 0009 05:28:18 Msec=2250 True Az=81.99 Ze=-27.06 Az status=0009 Ze status=0009 05:28:18 Check angles 05:28:18 SkyScan query 05:28:18 SkyScan query done: ret=0 az=64.44<-4296 ze=-38.565<-14571 Statuses=0009 0008 05:28:18 Msec=3000 True Az=64.44 Ze=-38.565 Az status=0009 Ze status=0008 05:28:19 Check angles 05:28:19 SkyScan query 05:28:19 SkyScan query done: ret=0 az=46.65<-3110 ze=-38.535<-14569 Statuses=0009 0008 05:28:19 Msec=3750 True Az=46.65 Ze=-38.535 Az status=0009 Ze status=0008 05:28:19 Check angles 05:28:19 SkyScan query 05:28:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:28:20 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:28:20 Message to Master queued w/err=0: serial=54534 error=0 05:28:25 Received message from Master: op=Filter serial=54535 05:28:25 Color wheel filter change from 0 to 0 05:28:25 FLIGetFilterPos err=0 currentPosition=0 05:28:25 FLIGetStepsRemaining err=0 RemainingSteps=0 05:28:25 Filter is already there-color wheel unchanged 05:28:25 Received message from Master: op=Shutter serial=54536 05:28:25 Shutter LASER close 05:28:25 Received message from Camera: op=State serial=54538 05:28:25 GetSingleValue result=40 Value=cccccccc 05:28:25 SkyScan query 05:28:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:28:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:26 Parameters OK 05:28:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:26 Set A/D data flow result=40 05:28:26 Set A/D channel type result=40 05:28:26 Set A/D encoding result=40 05:28:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:26 Set channel filter=0.000000e+000 result=40 05:28:26 Config A/D Result=40 05:28:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:26 Get A/D filter: -9.255963e+061 result=40 05:28:26 Get A/D value=-858993460 result=40 05:28:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:26 Parameters OK 05:28:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:26 Set A/D data flow result=40 05:28:26 Set A/D channel type result=40 05:28:26 Set A/D encoding result=40 05:28:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:26 Set channel filter=0.000000e+000 result=40 05:28:26 Config A/D Result=40 05:28:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:26 Get A/D filter: -9.255963e+061 result=40 05:28:26 Get A/D value=-858993460 result=40 05:28:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:28:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:28:26 Aux= 05:28:26 Message to Camera, serial 54538 queued 05:29:02 Received message from Master: op=PointingHead serial=54551 05:29:02 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:29:02 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:29:03 Point started: ret=0 05:29:03 point_skyscan result=0 05:29:04 Check angles 05:29:04 SkyScan query 05:29:04 SkyScan query done: ret=0 az=64.5<-4300 ze=-68.91<-16594 Statuses=0009 0009 05:29:04 Msec=0 True Az=64.5 Ze=-68.91 Az status=0009 Ze status=0009 05:29:04 Check angles 05:29:04 SkyScan query 05:29:05 SkyScan query done: ret=0 az=82.26<-5484 ze=-90.255<-18017 Statuses=0009 0009 05:29:05 Msec=750 True Az=82.26 Ze=-90.255 Az status=0009 Ze status=0009 05:29:05 Check angles 05:29:05 SkyScan query 05:29:06 SkyScan query done: ret=0 az=99.885<-6659 ze=-111.195<-19413 Statuses=0009 0009 05:29:06 Msec=1500 True Az=99.885 Ze=-111.195 Az status=0009 Ze status=0009 05:29:06 Check angles 05:29:06 SkyScan query 05:29:06 SkyScan query done: ret=0 az=117.66<-7844 ze=-132.57<-20838 Statuses=0009 0009 05:29:06 Msec=2250 True Az=117.66 Ze=-132.57 Az status=0009 Ze status=0009 05:29:07 Check angles 05:29:07 SkyScan query 05:29:07 SkyScan query done: ret=0 az=130.95<-8730 ze=-141.54<-21436 Statuses=0009 0008 05:29:07 Msec=3000 True Az=130.95 Ze=-141.54 Az status=0009 Ze status=0008 05:29:07 Check angles 05:29:07 SkyScan query 05:29:08 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 05:29:08 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 05:29:08 Message to Master queued w/err=0: serial=54551 error=0 05:29:13 Received message from Master: op=Filter serial=54552 05:29:13 Color wheel filter change from 0 to 0 05:29:13 FLIGetFilterPos err=0 currentPosition=0 05:29:13 FLIGetStepsRemaining err=0 RemainingSteps=0 05:29:13 Filter is already there-color wheel unchanged 05:29:13 Received message from Master: op=Shutter serial=54553 05:29:13 Shutter LASER close 05:29:13 Received message from Camera: op=State serial=54555 05:29:13 GetSingleValue result=40 Value=cccccccc 05:29:13 SkyScan query 05:29:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:29:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:14 Parameters OK 05:29:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:14 Set A/D data flow result=40 05:29:14 Set A/D channel type result=40 05:29:14 Set A/D encoding result=40 05:29:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:14 Set channel filter=0.000000e+000 result=40 05:29:14 Config A/D Result=40 05:29:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:14 Get A/D filter: -9.255963e+061 result=40 05:29:14 Get A/D value=-858993460 result=40 05:29:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:14 Parameters OK 05:29:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:14 Set A/D data flow result=40 05:29:14 Set A/D channel type result=40 05:29:14 Set A/D encoding result=40 05:29:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:14 Set channel filter=0.000000e+000 result=40 05:29:14 Config A/D Result=40 05:29:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:14 Get A/D filter: -9.255963e+061 result=40 05:29:14 Get A/D value=-858993460 result=40 05:29:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:14 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:29:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:29:14 Aux= 05:29:14 Message to Camera, serial 54555 queued 05:29:51 Received message from Master: op=PointingHead serial=54568 05:29:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:29:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:29:51 Point started: ret=0 05:29:51 point_skyscan result=0 05:29:52 Check angles 05:29:52 SkyScan query 05:29:52 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 05:29:52 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 05:29:52 Check angles 05:29:52 SkyScan query 05:29:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:29:53 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:29:53 Message to Master queued w/err=0: serial=54568 error=0 05:29:58 Received message from Master: op=Filter serial=54569 05:29:58 Color wheel filter change from 0 to 0 05:29:58 FLIGetFilterPos err=0 currentPosition=0 05:29:58 FLIGetStepsRemaining err=0 RemainingSteps=0 05:29:58 Filter is already there-color wheel unchanged 05:29:58 Received message from Master: op=Shutter serial=54570 05:29:58 Shutter LASER open 05:29:58 Received message from Camera: op=State serial=54572 05:29:58 GetSingleValue result=40 Value=cccccccc 05:29:58 SkyScan query 05:29:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:29:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:59 Parameters OK 05:29:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:59 Set A/D data flow result=40 05:29:59 Set A/D channel type result=40 05:29:59 Set A/D encoding result=40 05:29:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:59 Set channel filter=0.000000e+000 result=40 05:29:59 Config A/D Result=40 05:29:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:59 Get A/D filter: -9.255963e+061 result=40 05:29:59 Get A/D value=-858993460 result=40 05:29:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:59 Parameters OK 05:29:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:59 Set A/D data flow result=40 05:29:59 Set A/D channel type result=40 05:29:59 Set A/D encoding result=40 05:29:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:59 Set channel filter=0.000000e+000 result=40 05:29:59 Config A/D Result=40 05:29:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:59 Get A/D filter: -9.255963e+061 result=40 05:29:59 Get A/D value=-858993460 result=40 05:29:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:29:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:29:59 Aux= 05:29:59 Message to Camera, serial 54572 queued 05:30:07 Received message from Master: op=Shutter serial=54582 05:30:07 Shutter LASER close 05:30:08 Received message from Master: op=PointingHead serial=54586 05:30:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:30:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:30:08 Point started: ret=0 05:30:08 point_skyscan result=0 05:30:09 Check angles 05:30:09 SkyScan query 05:30:10 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.55<-21570 Statuses=0009 0009 05:30:10 Msec=0 True Az=135.72 Ze=-143.55 Az status=0009 Ze status=0009 05:30:10 Check angles 05:30:10 SkyScan query 05:30:10 SkyScan query done: ret=0 az=153.165<-10211 ze=-122.61<-20174 Statuses=0009 0009 05:30:10 Msec=750 True Az=153.165 Ze=-122.61 Az status=0009 Ze status=0009 05:30:11 Check angles 05:30:11 SkyScan query 05:30:11 SkyScan query done: ret=0 az=170.73<-11382 ze=-101.685<-18779 Statuses=0009 0009 05:30:11 Msec=1500 True Az=170.73 Ze=-101.685 Az status=0009 Ze status=0009 05:30:11 Check angles 05:30:11 SkyScan query 05:30:12 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.655<-17377 Statuses=0008 0009 05:30:12 Msec=2250 True Az=176.025 Ze=-80.655 Az status=0008 Ze status=0009 05:30:12 Check angles 05:30:12 SkyScan query 05:30:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.745<-15983 Statuses=0008 0009 05:30:13 Msec=3000 True Az=175.995 Ze=-59.745 Az status=0008 Ze status=0009 05:30:13 Check angles 05:30:13 SkyScan query 05:30:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:30:13 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:30:13 Message to Master queued w/err=0: serial=54586 error=0 05:30:18 Received message from Master: op=Filter serial=54587 05:30:18 Color wheel filter change from 0 to 0 05:30:18 FLIGetFilterPos err=0 currentPosition=0 05:30:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:30:18 Filter is already there-color wheel unchanged 05:30:19 Received message from Master: op=Shutter serial=54588 05:30:19 Shutter LASER close 05:30:19 Received message from Camera: op=State serial=54590 05:30:19 GetSingleValue result=40 Value=cccccccc 05:30:19 SkyScan query 05:30:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:30:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:19 Parameters OK 05:30:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:19 Set A/D data flow result=40 05:30:19 Set A/D channel type result=40 05:30:19 Set A/D encoding result=40 05:30:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:19 Set channel filter=0.000000e+000 result=40 05:30:19 Config A/D Result=40 05:30:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:19 Get A/D filter: -9.255963e+061 result=40 05:30:19 Get A/D value=-858993460 result=40 05:30:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:19 Parameters OK 05:30:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:19 Set A/D data flow result=40 05:30:19 Set A/D channel type result=40 05:30:19 Set A/D encoding result=40 05:30:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:19 Set channel filter=0.000000e+000 result=40 05:30:19 Config A/D Result=40 05:30:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:19 Get A/D filter: -9.255963e+061 result=40 05:30:19 Get A/D value=-858993460 result=40 05:30:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:30:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:30:19 Aux= 05:30:19 Message to Camera, serial 54590 queued 05:30:56 Received message from Master: op=PointingHead serial=54603 05:30:56 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:30:56 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:30:57 Point started: ret=0 05:30:57 point_skyscan result=0 05:30:57 Check angles 05:30:57 SkyScan query 05:30:58 SkyScan query done: ret=0 az=153.18<-10212 ze=-22.005<-13467 Statuses=0009 0009 05:30:58 Msec=0 True Az=153.18 Ze=-22.005 Az status=0009 Ze status=0009 05:30:58 Check angles 05:30:58 SkyScan query 05:30:59 SkyScan query done: ret=0 az=135.795<-9053 ze=-1.035<-12069 Statuses=0009 0009 05:30:59 Msec=750 True Az=135.795 Ze=-1.035 Az status=0009 Ze status=0009 05:30:59 Check angles 05:30:59 SkyScan query 05:30:59 SkyScan query done: ret=0 az=117.84<-7856 ze=20.325<-10645 Statuses=0009 0009 05:30:59 Msec=1500 True Az=117.84 Ze=20.325 Az status=0009 Ze status=0009 05:31:00 Check angles 05:31:00 SkyScan query 05:31:00 SkyScan query done: ret=0 az=100.32<-6688 ze=41.31<-9246 Statuses=0009 0009 05:31:00 Msec=2250 True Az=100.32 Ze=41.31 Az status=0009 Ze status=0009 05:31:00 Check angles 05:31:00 SkyScan query 05:31:01 SkyScan query done: ret=0 az=86.04<-5736 ze=51.555<-8563 Statuses=0009 0008 05:31:01 Msec=3000 True Az=86.04 Ze=51.555 Az status=0009 Ze status=0008 05:31:01 Check angles 05:31:01 SkyScan query 05:31:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:31:02 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:31:02 Message to Master queued w/err=0: serial=54603 error=0 05:31:07 Received message from Master: op=Filter serial=54604 05:31:07 Color wheel filter change from 0 to 0 05:31:07 FLIGetFilterPos err=0 currentPosition=0 05:31:07 FLIGetStepsRemaining err=0 RemainingSteps=0 05:31:07 Filter is already there-color wheel unchanged 05:31:07 Received message from Master: op=Shutter serial=54605 05:31:07 Shutter LASER close 05:31:07 Received message from Camera: op=State serial=54607 05:31:07 GetSingleValue result=40 Value=cccccccc 05:31:07 SkyScan query 05:31:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:31:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:07 Parameters OK 05:31:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:07 Set A/D data flow result=40 05:31:07 Set A/D channel type result=40 05:31:07 Set A/D encoding result=40 05:31:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:07 Set channel filter=0.000000e+000 result=40 05:31:07 Config A/D Result=40 05:31:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:07 Get A/D filter: -9.255963e+061 result=40 05:31:07 Get A/D value=-858993460 result=40 05:31:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:07 Parameters OK 05:31:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:07 Set A/D data flow result=40 05:31:07 Set A/D channel type result=40 05:31:07 Set A/D encoding result=40 05:31:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:07 Set channel filter=0.000000e+000 result=40 05:31:07 Config A/D Result=40 05:31:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:07 Get A/D filter: -9.255963e+061 result=40 05:31:07 Get A/D value=-858993460 result=40 05:31:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:31:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:31:07 Aux= 05:31:07 Message to Camera, serial 54607 queued 05:31:44 Received message from Master: op=PointingHead serial=54620 05:31:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:31:44 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:31:45 Point started: ret=0 05:31:45 point_skyscan result=0 05:31:45 Check angles 05:31:45 SkyScan query 05:31:46 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 05:31:46 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 05:31:46 Check angles 05:31:46 SkyScan query 05:31:47 SkyScan query done: ret=0 az=126.48<-8432 ze=38.505<-9433 Statuses=0009 0008 05:31:47 Msec=750 True Az=126.48 Ze=38.505 Az status=0009 Ze status=0008 05:31:47 Check angles 05:31:47 SkyScan query 05:31:48 SkyScan query done: ret=0 az=143.865<-9591 ze=38.505<-9433 Statuses=0009 0008 05:31:48 Msec=1500 True Az=143.865 Ze=38.505 Az status=0009 Ze status=0008 05:31:48 Check angles 05:31:48 SkyScan query 05:31:48 SkyScan query done: ret=0 az=161.31<-10754 ze=38.505<-9433 Statuses=0009 0008 05:31:48 Msec=2250 True Az=161.31 Ze=38.505 Az status=0009 Ze status=0008 05:31:48 Check angles 05:31:48 SkyScan query 05:31:49 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 05:31:49 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 05:31:49 Check angles 05:31:49 SkyScan query 05:31:50 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:31:50 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:31:50 Message to Master queued w/err=0: serial=54620 error=0 05:31:55 Received message from Master: op=Filter serial=54621 05:31:55 Color wheel filter change from 0 to 0 05:31:55 FLIGetFilterPos err=0 currentPosition=0 05:31:55 FLIGetStepsRemaining err=0 RemainingSteps=0 05:31:55 Filter is already there-color wheel unchanged 05:31:55 Received message from Master: op=Shutter serial=54622 05:31:55 Shutter LASER close 05:31:55 Received message from Camera: op=State serial=54624 05:31:55 GetSingleValue result=40 Value=cccccccc 05:31:55 SkyScan query 05:31:56 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:31:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:56 Parameters OK 05:31:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:56 Set A/D data flow result=40 05:31:56 Set A/D channel type result=40 05:31:56 Set A/D encoding result=40 05:31:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:56 Set channel filter=0.000000e+000 result=40 05:31:56 Config A/D Result=40 05:31:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:56 Get A/D filter: -9.255963e+061 result=40 05:31:56 Get A/D value=-858993460 result=40 05:31:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:56 Parameters OK 05:31:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:56 Set A/D data flow result=40 05:31:56 Set A/D channel type result=40 05:31:56 Set A/D encoding result=40 05:31:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:56 Set channel filter=0.000000e+000 result=40 05:31:56 Config A/D Result=40 05:31:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:56 Get A/D filter: -9.255963e+061 result=40 05:31:56 Get A/D value=-858993460 result=40 05:31:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:31:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:31:56 Aux= 05:31:56 Message to Camera, serial 54624 queued 05:32:32 Received message from Master: op=PointingHead serial=54637 05:32:32 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:32:32 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:32:33 Point started: ret=0 05:32:33 point_skyscan result=0 05:32:33 Check angles 05:32:33 SkyScan query 05:32:34 SkyScan query done: ret=0 az=152.985<-10199 ze=8.61<-11426 Statuses=0009 0009 05:32:34 Msec=0 True Az=152.985 Ze=8.61 Az status=0009 Ze status=0009 05:32:34 Check angles 05:32:34 SkyScan query 05:32:35 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.315<-12821 Statuses=0009 0009 05:32:35 Msec=750 True Az=135.435 Ze=-12.315 Az status=0009 Ze status=0009 05:32:35 Check angles 05:32:35 SkyScan query 05:32:36 SkyScan query done: ret=0 az=117.99<-7866 ze=-33.255<-14217 Statuses=0009 0009 05:32:36 Msec=1500 True Az=117.99 Ze=-33.255 Az status=0009 Ze status=0009 05:32:36 Check angles 05:32:36 SkyScan query 05:32:36 SkyScan query done: ret=0 az=100.5<-6700 ze=-51.54<-15436 Statuses=0009 0009 05:32:36 Msec=2250 True Az=100.5 Ze=-51.54 Az status=0009 Ze status=0009 05:32:36 Check angles 05:32:36 SkyScan query 05:32:37 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 05:32:37 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 05:32:37 Check angles 05:32:37 SkyScan query 05:32:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:32:38 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:32:38 Message to Master queued w/err=0: serial=54637 error=0 05:32:43 Received message from Master: op=Filter serial=54638 05:32:43 Color wheel filter change from 0 to 0 05:32:43 FLIGetFilterPos err=0 currentPosition=0 05:32:43 FLIGetStepsRemaining err=0 RemainingSteps=0 05:32:43 Filter is already there-color wheel unchanged 05:32:43 Received message from Master: op=Shutter serial=54639 05:32:43 Shutter LASER close 05:32:43 Received message from Camera: op=State serial=54641 05:32:43 GetSingleValue result=40 Value=cccccccc 05:32:43 SkyScan query 05:32:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:32:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:44 Parameters OK 05:32:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:44 Set A/D data flow result=40 05:32:44 Set A/D channel type result=40 05:32:44 Set A/D encoding result=40 05:32:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:44 Set channel filter=0.000000e+000 result=40 05:32:44 Config A/D Result=40 05:32:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:44 Get A/D filter: -9.255963e+061 result=40 05:32:44 Get A/D value=-858993460 result=40 05:32:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:44 Parameters OK 05:32:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:44 Set A/D data flow result=40 05:32:44 Set A/D channel type result=40 05:32:44 Set A/D encoding result=40 05:32:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:44 Set channel filter=0.000000e+000 result=40 05:32:44 Config A/D Result=40 05:32:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:44 Get A/D filter: -9.255963e+061 result=40 05:32:44 Get A/D value=-858993460 result=40 05:32:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:32:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:32:44 Aux= 05:32:44 Message to Camera, serial 54641 queued 05:33:20 Received message from Master: op=PointingHead serial=54654 05:33:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:33:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:33:21 Point started: ret=0 05:33:21 point_skyscan result=0 05:33:22 Check angles 05:33:22 SkyScan query 05:33:22 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.165<-17411 Statuses=0009 0009 05:33:22 Msec=0 True Az=108.9 Ze=-81.165 Az status=0009 Ze status=0009 05:33:22 Check angles 05:33:22 SkyScan query 05:33:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.105<-18807 Statuses=0008 0009 05:33:23 Msec=750 True Az=112.995 Ze=-102.105 Az status=0008 Ze status=0009 05:33:23 Check angles 05:33:23 SkyScan query 05:33:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.105<-20207 Statuses=0008 0009 05:33:24 Msec=1500 True Az=112.995 Ze=-123.105 Az status=0008 Ze status=0009 05:33:24 Check angles 05:33:24 SkyScan query 05:33:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.03<-21602 Statuses=0008 0009 05:33:24 Msec=2250 True Az=112.995 Ze=-144.03 Az status=0008 Ze status=0009 05:33:25 Check angles 05:33:25 SkyScan query 05:33:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.015<-23001 Statuses=0008 0009 05:33:25 Msec=3000 True Az=112.995 Ze=-165.015 Az status=0008 Ze status=0009 05:33:25 Check angles 05:33:25 SkyScan query 05:33:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 05:33:26 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 05:33:26 Message to Master queued w/err=0: serial=54654 error=0 05:33:31 Received message from Master: op=Filter serial=54655 05:33:31 Color wheel filter change from 0 to 0 05:33:31 FLIGetFilterPos err=0 currentPosition=0 05:33:31 FLIGetStepsRemaining err=0 RemainingSteps=0 05:33:31 Filter is already there-color wheel unchanged 05:33:31 Received message from Master: op=Shutter serial=54656 05:33:31 Shutter LASER open 05:33:31 Received message from Camera: op=State serial=54658 05:33:31 GetSingleValue result=40 Value=cccccccc 05:33:31 SkyScan query 05:33:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:33:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:32 Parameters OK 05:33:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:32 Set A/D data flow result=40 05:33:32 Set A/D channel type result=40 05:33:32 Set A/D encoding result=40 05:33:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:32 Set channel filter=0.000000e+000 result=40 05:33:32 Config A/D Result=40 05:33:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:32 Get A/D filter: -9.255963e+061 result=40 05:33:32 Get A/D value=-858993460 result=40 05:33:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:32 Parameters OK 05:33:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:32 Set A/D data flow result=40 05:33:32 Set A/D channel type result=40 05:33:32 Set A/D encoding result=40 05:33:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:32 Set channel filter=0.000000e+000 result=40 05:33:32 Config A/D Result=40 05:33:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:32 Get A/D filter: -9.255963e+061 result=40 05:33:32 Get A/D value=-858993460 result=40 05:33:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:33:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:33:32 Aux= 05:33:32 Message to Camera, serial 54658 queued 05:33:40 Received message from Master: op=Shutter serial=54668 05:33:40 Shutter LASER close 05:33:41 Received message from Master: op=PointingHead serial=54672 05:33:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:33:41 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:33:41 Point started: ret=0 05:33:41 point_skyscan result=0 05:33:42 Check angles 05:33:42 SkyScan query 05:33:42 SkyScan query done: ret=0 az=89.895<-5993 ze=157.335<-1511 Statuses=0009 0009 05:33:42 Msec=0 True Az=89.895 Ze=157.335 Az status=0009 Ze status=0009 05:33:42 Check angles 05:33:42 SkyScan query 05:33:43 SkyScan query done: ret=0 az=72.48<-4832 ze=136.395<-2907 Statuses=0009 0009 05:33:43 Msec=750 True Az=72.48 Ze=136.395 Az status=0009 Ze status=0009 05:33:43 Check angles 05:33:43 SkyScan query 05:33:44 SkyScan query done: ret=0 az=55.02<-3668 ze=115.47<-4302 Statuses=0009 0009 05:33:44 Msec=1500 True Az=55.02 Ze=115.47 Az status=0009 Ze status=0009 05:33:44 Check angles 05:33:44 SkyScan query 05:33:45 SkyScan query done: ret=0 az=40.875<-2725 ze=94.455<-5703 Statuses=0009 0009 05:33:45 Msec=2250 True Az=40.875 Ze=94.455 Az status=0009 Ze status=0009 05:33:45 Check angles 05:33:45 SkyScan query 05:33:45 SkyScan query done: ret=0 az=40.995<-2733 ze=73.515<-7099 Statuses=0008 0009 05:33:45 Msec=3000 True Az=40.995 Ze=73.515 Az status=0008 Ze status=0009 05:33:45 Check angles 05:33:45 SkyScan query 05:33:46 SkyScan query done: ret=0 az=40.995<-2733 ze=52.905<-8473 Statuses=0008 0009 05:33:46 Msec=3750 True Az=40.995 Ze=52.905 Az status=0008 Ze status=0009 05:33:46 Check angles 05:33:46 SkyScan query 05:33:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:33:47 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:33:47 Message to Master queued w/err=0: serial=54672 error=0 05:33:52 Received message from Master: op=Filter serial=54673 05:33:52 Color wheel filter change from 0 to 0 05:33:52 FLIGetFilterPos err=0 currentPosition=0 05:33:52 FLIGetStepsRemaining err=0 RemainingSteps=0 05:33:52 Filter is already there-color wheel unchanged 05:33:52 Received message from Master: op=Shutter serial=54674 05:33:52 Shutter LASER close 05:33:52 Received message from Camera: op=State serial=54676 05:33:52 GetSingleValue result=40 Value=cccccccc 05:33:52 SkyScan query 05:33:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:33:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:53 Parameters OK 05:33:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:53 Set A/D data flow result=40 05:33:53 Set A/D channel type result=40 05:33:53 Set A/D encoding result=40 05:33:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:53 Set channel filter=0.000000e+000 result=40 05:33:53 Config A/D Result=40 05:33:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:53 Get A/D filter: -9.255963e+061 result=40 05:33:53 Get A/D value=-858993460 result=40 05:33:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:53 Parameters OK 05:33:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:53 Set A/D data flow result=40 05:33:53 Set A/D channel type result=40 05:33:53 Set A/D encoding result=40 05:33:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:53 Set channel filter=0.000000e+000 result=40 05:33:53 Config A/D Result=40 05:33:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:53 Get A/D filter: -9.255963e+061 result=40 05:33:53 Get A/D value=-858993460 result=40 05:33:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:33:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:33:53 Aux= 05:33:53 Message to Camera, serial 54676 queued 05:34:30 Received message from Master: op=PointingHead serial=54689 05:34:30 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:34:30 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:34:30 Point started: ret=0 05:34:30 point_skyscan result=0 05:34:31 Check angles 05:34:31 SkyScan query 05:34:31 SkyScan query done: ret=0 az=64.305<-4287 ze=66.555<-7563 Statuses=0009 0008 05:34:31 Msec=0 True Az=64.305 Ze=66.555 Az status=0009 Ze status=0008 05:34:31 Check angles 05:34:31 SkyScan query 05:34:32 SkyScan query done: ret=0 az=82.035<-5469 ze=66.495<-7567 Statuses=0009 0008 05:34:32 Msec=750 True Az=82.035 Ze=66.495 Az status=0009 Ze status=0008 05:34:32 Check angles 05:34:32 SkyScan query 05:34:33 SkyScan query done: ret=0 az=99.69<-6646 ze=66.495<-7567 Statuses=0009 0008 05:34:33 Msec=1500 True Az=99.69 Ze=66.495 Az status=0009 Ze status=0008 05:34:33 Check angles 05:34:33 SkyScan query 05:34:34 SkyScan query done: ret=0 az=117.15<-7810 ze=66.495<-7567 Statuses=0009 0008 05:34:34 Msec=2250 True Az=117.15 Ze=66.495 Az status=0009 Ze status=0008 05:34:34 Check angles 05:34:34 SkyScan query 05:34:34 SkyScan query done: ret=0 az=134.835<-8989 ze=66.495<-7567 Statuses=0009 0008 05:34:34 Msec=3000 True Az=134.835 Ze=66.495 Az status=0009 Ze status=0008 05:34:34 Check angles 05:34:34 SkyScan query 05:34:35 SkyScan query done: ret=0 az=152.415<-10161 ze=66.495<-7567 Statuses=0009 0008 05:34:35 Msec=3750 True Az=152.415 Ze=66.495 Az status=0009 Ze status=0008 05:34:35 Check angles 05:34:35 SkyScan query 05:34:36 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:34:36 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 05:34:36 Message to Master queued w/err=0: serial=54689 error=0 05:34:41 Received message from Master: op=Filter serial=54690 05:34:41 Color wheel filter change from 0 to 0 05:34:41 FLIGetFilterPos err=0 currentPosition=0 05:34:41 FLIGetStepsRemaining err=0 RemainingSteps=0 05:34:41 Filter is already there-color wheel unchanged 05:34:41 Received message from Master: op=Shutter serial=54691 05:34:41 Shutter LASER close 05:34:41 Received message from Camera: op=State serial=54693 05:34:41 GetSingleValue result=40 Value=cccccccc 05:34:41 SkyScan query 05:34:42 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:34:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:42 Parameters OK 05:34:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:42 Set A/D data flow result=40 05:34:42 Set A/D channel type result=40 05:34:42 Set A/D encoding result=40 05:34:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:42 Set channel filter=0.000000e+000 result=40 05:34:42 Config A/D Result=40 05:34:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:42 Get A/D filter: -9.255963e+061 result=40 05:34:42 Get A/D value=-858993460 result=40 05:34:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:42 Parameters OK 05:34:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:42 Set A/D data flow result=40 05:34:42 Set A/D channel type result=40 05:34:42 Set A/D encoding result=40 05:34:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:42 Set channel filter=0.000000e+000 result=40 05:34:42 Config A/D Result=40 05:34:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:42 Get A/D filter: -9.255963e+061 result=40 05:34:42 Get A/D value=-858993460 result=40 05:34:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:42 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:34:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:34:42 Aux= 05:34:42 Message to Camera, serial 54693 queued 05:35:18 Received message from Master: op=PointingHead serial=54706 05:35:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:35:18 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:35:19 Point started: ret=0 05:35:19 point_skyscan result=0 05:35:20 Check angles 05:35:20 SkyScan query 05:35:20 SkyScan query done: ret=0 az=135<-9000 ze=36.735<-9551 Statuses=0009 0009 05:35:20 Msec=0 True Az=135 Ze=36.735 Az status=0009 Ze status=0009 05:35:20 Check angles 05:35:20 SkyScan query 05:35:21 SkyScan query done: ret=0 az=117.525<-7835 ze=15.765<-10949 Statuses=0009 0009 05:35:21 Msec=750 True Az=117.525 Ze=15.765 Az status=0009 Ze status=0009 05:35:21 Check angles 05:35:21 SkyScan query 05:35:22 SkyScan query done: ret=0 az=100.125<-6675 ze=-5.19<-12346 Statuses=0009 0009 05:35:22 Msec=1500 True Az=100.125 Ze=-5.19 Az status=0009 Ze status=0009 05:35:22 Check angles 05:35:22 SkyScan query 05:35:22 SkyScan query done: ret=0 az=82.23<-5482 ze=-26.565<-13771 Statuses=0009 0009 05:35:22 Msec=2250 True Az=82.23 Ze=-26.565 Az status=0009 Ze status=0009 05:35:23 Check angles 05:35:23 SkyScan query 05:35:23 SkyScan query done: ret=0 az=64.755<-4317 ze=-38.565<-14571 Statuses=0009 0008 05:35:23 Msec=3000 True Az=64.755 Ze=-38.565 Az status=0009 Ze status=0008 05:35:23 Check angles 05:35:23 SkyScan query 05:35:24 SkyScan query done: ret=0 az=47.295<-3153 ze=-38.535<-14569 Statuses=0009 0008 05:35:24 Msec=3750 True Az=47.295 Ze=-38.535 Az status=0009 Ze status=0008 05:35:24 Check angles 05:35:24 SkyScan query 05:35:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:35:25 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:35:25 Message to Master queued w/err=0: serial=54706 error=0 05:35:30 Received message from Master: op=Filter serial=54707 05:35:30 Color wheel filter change from 0 to 0 05:35:30 FLIGetFilterPos err=0 currentPosition=0 05:35:30 FLIGetStepsRemaining err=0 RemainingSteps=0 05:35:30 Filter is already there-color wheel unchanged 05:35:30 Received message from Master: op=Shutter serial=54708 05:35:30 Shutter LASER close 05:35:30 Received message from Camera: op=State serial=54710 05:35:30 GetSingleValue result=40 Value=cccccccc 05:35:30 SkyScan query 05:35:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:35:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:30 Parameters OK 05:35:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:30 Set A/D data flow result=40 05:35:30 Set A/D channel type result=40 05:35:30 Set A/D encoding result=40 05:35:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:30 Set channel filter=0.000000e+000 result=40 05:35:30 Config A/D Result=40 05:35:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:30 Get A/D filter: -9.255963e+061 result=40 05:35:30 Get A/D value=-858993460 result=40 05:35:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:30 Parameters OK 05:35:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:30 Set A/D data flow result=40 05:35:30 Set A/D channel type result=40 05:35:30 Set A/D encoding result=40 05:35:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:30 Set channel filter=0.000000e+000 result=40 05:35:30 Config A/D Result=40 05:35:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:30 Get A/D filter: -9.255963e+061 result=40 [UTC 2018-12-11 05:35:30] 05:35:30 Get A/D value=-858993460 result=40 05:35:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:35:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:35:31 Aux= 05:35:31 Message to Camera, serial 54710 queued [UTC 2018-12-11 05:35:54] 05:36:07 Received message from Master: op=PointingHead serial=54723 05:36:07 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:36:07 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:36:08 Point started: ret=0 05:36:08 point_skyscan result=0 05:36:08 Check angles 05:36:08 SkyScan query 05:36:09 SkyScan query done: ret=0 az=63.735<-4249 ze=-68.01<-16534 Statuses=0009 0009 05:36:09 Msec=0 True Az=63.735 Ze=-68.01 Az status=0009 Ze status=0009 05:36:09 Check angles 05:36:09 SkyScan query 05:36:10 SkyScan query done: ret=0 az=81.135<-5409 ze=-88.995<-17933 Statuses=0009 0009 05:36:10 Msec=750 True Az=81.135 Ze=-88.995 Az status=0009 Ze status=0009 05:36:10 Check angles 05:36:10 SkyScan query 05:36:10 SkyScan query done: ret=0 az=98.67<-6578 ze=-109.905<-19327 Statuses=0009 0009 05:36:10 Msec=1500 True Az=98.67 Ze=-109.905 Az status=0009 Ze status=0009 05:36:11 Check angles 05:36:11 SkyScan query 05:36:11 SkyScan query done: ret=0 az=116.76<-7784 ze=-131.325<-20755 Statuses=0009 0009 05:36:11 Msec=2250 True Az=116.76 Ze=-131.325 Az status=0009 Ze status=0009 05:36:11 Check angles 05:36:11 SkyScan query 05:36:12 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 05:36:12 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 05:36:12 Check angles 05:36:12 SkyScan query 05:36:13 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:36:13 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:36:13 Message to Master queued w/err=0: serial=54723 error=0 05:36:18 Received message from Master: op=Filter serial=54724 05:36:18 Color wheel filter change from 0 to 0 05:36:18 FLIGetFilterPos err=0 currentPosition=0 05:36:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:36:18 Filter is already there-color wheel unchanged 05:36:18 Received message from Master: op=Shutter serial=54725 05:36:18 Shutter LASER close 05:36:18 Received message from Camera: op=State serial=54727 05:36:18 GetSingleValue result=40 Value=cccccccc 05:36:18 SkyScan query 05:36:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:36:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:19 Parameters OK 05:36:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:19 Set A/D data flow result=40 05:36:19 Set A/D channel type result=40 05:36:19 Set A/D encoding result=40 05:36:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:19 Set channel filter=0.000000e+000 result=40 05:36:19 Config A/D Result=40 05:36:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:19 Get A/D filter: -9.255963e+061 result=40 05:36:19 Get A/D value=-858993460 result=40 05:36:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:19 Parameters OK 05:36:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:19 Set A/D data flow result=40 05:36:19 Set A/D channel type result=40 05:36:19 Set A/D encoding result=40 05:36:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:19 Set channel filter=0.000000e+000 result=40 05:36:19 Config A/D Result=40 05:36:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:19 Get A/D filter: -9.255963e+061 result=40 05:36:19 Get A/D value=-858993460 result=40 05:36:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:19 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:36:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:36:19 Aux= 05:36:19 Message to Camera, serial 54727 queued 05:36:55 Received message from Master: op=PointingHead serial=54740 05:36:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:36:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:36:56 Point started: ret=0 05:36:56 point_skyscan result=0 05:36:57 Check angles 05:36:57 SkyScan query 05:36:57 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.18<-23412 Statuses=0009 0009 05:36:57 Msec=0 True Az=113.01 Ze=-171.18 Az status=0009 Ze status=0009 05:36:57 Check angles 05:36:57 SkyScan query 05:36:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:36:58 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:36:58 Message to Master queued w/err=0: serial=54740 error=0 05:37:03 Received message from Master: op=Filter serial=54741 05:37:03 Color wheel filter change from 0 to 0 05:37:03 FLIGetFilterPos err=0 currentPosition=0 05:37:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:37:03 Filter is already there-color wheel unchanged 05:37:03 Received message from Master: op=Shutter serial=54742 05:37:03 Shutter LASER open 05:37:03 Received message from Camera: op=State serial=54744 05:37:03 GetSingleValue result=40 Value=cccccccc 05:37:03 SkyScan query 05:37:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:37:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:04 Parameters OK 05:37:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:04 Set A/D data flow result=40 05:37:04 Set A/D channel type result=40 05:37:04 Set A/D encoding result=40 05:37:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:04 Set channel filter=0.000000e+000 result=40 05:37:04 Config A/D Result=40 05:37:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:04 Get A/D filter: -9.255963e+061 result=40 05:37:04 Get A/D value=-858993460 result=40 05:37:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:04 Parameters OK 05:37:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:04 Set A/D data flow result=40 05:37:04 Set A/D channel type result=40 05:37:04 Set A/D encoding result=40 05:37:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:04 Set channel filter=0.000000e+000 result=40 05:37:04 Config A/D Result=40 05:37:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:04 Get A/D filter: -9.255963e+061 result=40 05:37:04 Get A/D value=-858993460 result=40 05:37:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:37:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:37:04 Aux= 05:37:04 Message to Camera, serial 54744 queued 05:37:12 Received message from Master: op=Shutter serial=54754 05:37:12 Shutter LASER close 05:37:13 Received message from Master: op=PointingHead serial=54758 05:37:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:37:13 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:37:13 Point started: ret=0 05:37:13 point_skyscan result=0 05:37:14 Check angles 05:37:14 SkyScan query 05:37:14 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.22<-21548 Statuses=0009 0009 05:37:14 Msec=0 True Az=136.02 Ze=-143.22 Az status=0009 Ze status=0009 05:37:15 Check angles 05:37:15 SkyScan query 05:37:15 SkyScan query done: ret=0 az=153.93<-10262 ze=-121.815<-20121 Statuses=0009 0009 05:37:15 Msec=750 True Az=153.93 Ze=-121.815 Az status=0009 Ze status=0009 05:37:15 Check angles 05:37:15 SkyScan query 05:37:16 SkyScan query done: ret=0 az=171.465<-11431 ze=-100.86<-18724 Statuses=0009 0009 05:37:16 Msec=1500 True Az=171.465 Ze=-100.86 Az status=0009 Ze status=0009 05:37:16 Check angles 05:37:16 SkyScan query 05:37:17 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.935<-17329 Statuses=0008 0009 05:37:17 Msec=2250 True Az=176.025 Ze=-79.935 Az status=0008 Ze status=0009 05:37:17 Check angles 05:37:17 SkyScan query 05:37:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.965<-15931 Statuses=0008 0009 05:37:18 Msec=3000 True Az=175.995 Ze=-58.965 Az status=0008 Ze status=0009 05:37:18 Check angles 05:37:18 SkyScan query 05:37:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:37:18 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:37:18 Message to Master queued w/err=0: serial=54758 error=0 05:37:23 Received message from Master: op=Filter serial=54759 05:37:23 Color wheel filter change from 0 to 0 05:37:23 FLIGetFilterPos err=0 currentPosition=0 05:37:23 FLIGetStepsRemaining err=0 RemainingSteps=0 05:37:23 Filter is already there-color wheel unchanged 05:37:23 Received message from Master: op=Shutter serial=54760 05:37:23 Shutter LASER close 05:37:24 Received message from Camera: op=State serial=54762 05:37:24 GetSingleValue result=40 Value=cccccccc 05:37:24 SkyScan query 05:37:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:37:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:24 Parameters OK 05:37:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:24 Set A/D data flow result=40 05:37:24 Set A/D channel type result=40 05:37:24 Set A/D encoding result=40 05:37:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:24 Set channel filter=0.000000e+000 result=40 05:37:24 Config A/D Result=40 05:37:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:24 Get A/D filter: -9.255963e+061 result=40 05:37:24 Get A/D value=-858993460 result=40 05:37:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:24 Parameters OK 05:37:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:24 Set A/D data flow result=40 05:37:24 Set A/D channel type result=40 05:37:24 Set A/D encoding result=40 05:37:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:24 Set channel filter=0.000000e+000 result=40 05:37:24 Config A/D Result=40 05:37:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:24 Get A/D filter: -9.255963e+061 result=40 05:37:24 Get A/D value=-858993460 result=40 05:37:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:37:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:37:24 Aux= 05:37:24 Message to Camera, serial 54762 queued 05:38:01 Received message from Master: op=PointingHead serial=54775 05:38:01 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:38:01 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:38:01 Point started: ret=0 05:38:01 point_skyscan result=0 05:38:02 Check angles 05:38:02 SkyScan query 05:38:03 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.75<-13450 Statuses=0009 0009 05:38:03 Msec=0 True Az=152.955 Ze=-21.75 Az status=0009 Ze status=0009 05:38:03 Check angles 05:38:03 SkyScan query 05:38:03 SkyScan query done: ret=0 az=135.51<-9034 ze=-0.78<-12052 Statuses=0009 0009 05:38:03 Msec=750 True Az=135.51 Ze=-0.78 Az status=0009 Ze status=0009 05:38:04 Check angles 05:38:04 SkyScan query 05:38:04 SkyScan query done: ret=0 az=117.915<-7861 ze=20.28<-10648 Statuses=0009 0009 05:38:04 Msec=1500 True Az=117.915 Ze=20.28 Az status=0009 Ze status=0009 05:38:04 Check angles 05:38:04 SkyScan query 05:38:05 SkyScan query done: ret=0 az=100.41<-6694 ze=41.115<-9259 Statuses=0009 0009 05:38:05 Msec=2250 True Az=100.41 Ze=41.115 Az status=0009 Ze status=0009 05:38:05 Check angles 05:38:05 SkyScan query 05:38:06 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 05:38:06 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 05:38:06 Check angles 05:38:06 SkyScan query 05:38:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:38:06 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:38:06 Message to Master queued w/err=0: serial=54775 error=0 05:38:11 Received message from Master: op=Filter serial=54776 05:38:11 Color wheel filter change from 0 to 0 05:38:11 FLIGetFilterPos err=0 currentPosition=0 05:38:11 FLIGetStepsRemaining err=0 RemainingSteps=0 05:38:11 Filter is already there-color wheel unchanged 05:38:12 Received message from Master: op=Shutter serial=54777 05:38:12 Shutter LASER close 05:38:12 Received message from Camera: op=State serial=54779 05:38:12 GetSingleValue result=40 Value=cccccccc 05:38:12 SkyScan query 05:38:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:38:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:12 Parameters OK 05:38:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:12 Set A/D data flow result=40 05:38:12 Set A/D channel type result=40 05:38:12 Set A/D encoding result=40 05:38:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:12 Set channel filter=0.000000e+000 result=40 05:38:12 Config A/D Result=40 05:38:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:12 Get A/D filter: -9.255963e+061 result=40 05:38:12 Get A/D value=-858993460 result=40 05:38:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:12 Parameters OK 05:38:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:12 Set A/D data flow result=40 05:38:12 Set A/D channel type result=40 05:38:12 Set A/D encoding result=40 05:38:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:12 Set channel filter=0.000000e+000 result=40 05:38:12 Config A/D Result=40 05:38:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:12 Get A/D filter: -9.255963e+061 result=40 05:38:12 Get A/D value=-858993460 result=40 05:38:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:38:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:38:12 Aux= 05:38:12 Message to Camera, serial 54779 queued 05:38:49 Received message from Master: op=PointingHead serial=54792 05:38:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:38:49 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:38:49 Point started: ret=0 05:38:49 point_skyscan result=0 05:38:50 Check angles 05:38:50 SkyScan query 05:38:51 SkyScan query done: ret=0 az=109.23<-7282 ze=38.49<-9434 Statuses=0009 0008 05:38:51 Msec=0 True Az=109.23 Ze=38.49 Az status=0009 Ze status=0008 05:38:51 Check angles 05:38:51 SkyScan query 05:38:52 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 05:38:52 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 05:38:52 Check angles 05:38:52 SkyScan query 05:38:52 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 05:38:52 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 05:38:52 Check angles 05:38:52 SkyScan query 05:38:53 SkyScan query done: ret=0 az=161.565<-10771 ze=38.505<-9433 Statuses=0009 0008 05:38:53 Msec=2250 True Az=161.565 Ze=38.505 Az status=0009 Ze status=0008 05:38:53 Check angles 05:38:53 SkyScan query 05:38:54 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 05:38:54 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 05:38:54 Check angles 05:38:54 SkyScan query 05:38:55 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:38:55 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:38:55 Message to Master queued w/err=0: serial=54792 error=0 05:39:00 Received message from Master: op=Filter serial=54793 05:39:00 Color wheel filter change from 0 to 0 05:39:00 FLIGetFilterPos err=0 currentPosition=0 05:39:00 FLIGetStepsRemaining err=0 RemainingSteps=0 05:39:00 Filter is already there-color wheel unchanged 05:39:00 Received message from Master: op=Shutter serial=54794 05:39:00 Shutter LASER close 05:39:00 Received message from Camera: op=State serial=54796 05:39:00 GetSingleValue result=40 Value=cccccccc 05:39:00 SkyScan query 05:39:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:39:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:00 Parameters OK 05:39:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:00 Set A/D data flow result=40 05:39:00 Set A/D channel type result=40 05:39:00 Set A/D encoding result=40 05:39:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:00 Set channel filter=0.000000e+000 result=40 05:39:00 Config A/D Result=40 05:39:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:00 Get A/D filter: -9.255963e+061 result=40 05:39:00 Get A/D value=-858993460 result=40 05:39:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:00 Parameters OK 05:39:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:00 Set A/D data flow result=40 05:39:00 Set A/D channel type result=40 05:39:00 Set A/D encoding result=40 05:39:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:00 Set channel filter=0.000000e+000 result=40 05:39:00 Config A/D Result=40 05:39:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:00 Get A/D filter: -9.255963e+061 result=40 05:39:00 Get A/D value=-858993460 result=40 05:39:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:39:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:39:00 Aux= 05:39:00 Message to Camera, serial 54796 queued 05:39:37 Received message from Master: op=PointingHead serial=54809 05:39:37 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:39:37 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:39:37 Point started: ret=0 05:39:37 point_skyscan result=0 05:39:38 Check angles 05:39:38 SkyScan query 05:39:39 SkyScan query done: ret=0 az=153.18<-10212 ze=8.925<-11405 Statuses=0009 0009 05:39:39 Msec=0 True Az=153.18 Ze=8.925 Az status=0009 Ze status=0009 05:39:39 Check angles 05:39:39 SkyScan query 05:39:40 SkyScan query done: ret=0 az=135.78<-9052 ze=-12.03<-12802 Statuses=0009 0009 05:39:40 Msec=750 True Az=135.78 Ze=-12.03 Az status=0009 Ze status=0009 05:39:40 Check angles 05:39:40 SkyScan query 05:39:40 SkyScan query done: ret=0 az=118.245<-7883 ze=-32.985<-14199 Statuses=0009 0009 05:39:40 Msec=1500 True Az=118.245 Ze=-32.985 Az status=0009 Ze status=0009 05:39:40 Check angles 05:39:40 SkyScan query 05:39:41 SkyScan query done: ret=0 az=100.695<-6713 ze=-51.495<-15433 Statuses=0009 0009 05:39:41 Msec=2250 True Az=100.695 Ze=-51.495 Az status=0009 Ze status=0009 05:39:41 Check angles 05:39:41 SkyScan query 05:39:42 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 05:39:42 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 05:39:42 Check angles 05:39:42 SkyScan query 05:39:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:39:43 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:39:43 Message to Master queued w/err=0: serial=54809 error=0 05:39:48 Received message from Master: op=Filter serial=54810 05:39:48 Color wheel filter change from 0 to 0 05:39:48 FLIGetFilterPos err=0 currentPosition=0 05:39:48 FLIGetStepsRemaining err=0 RemainingSteps=0 05:39:48 Filter is already there-color wheel unchanged 05:39:48 Received message from Master: op=Shutter serial=54811 05:39:48 Shutter LASER close 05:39:48 Received message from Camera: op=State serial=54813 05:39:48 GetSingleValue result=40 Value=cccccccc 05:39:48 SkyScan query 05:39:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:39:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:48 Parameters OK 05:39:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:48 Set A/D data flow result=40 05:39:48 Set A/D channel type result=40 05:39:48 Set A/D encoding result=40 05:39:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:48 Set channel filter=0.000000e+000 result=40 05:39:48 Config A/D Result=40 05:39:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:48 Get A/D filter: -9.255963e+061 result=40 05:39:48 Get A/D value=-858993460 result=40 05:39:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:48 Parameters OK 05:39:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:48 Set A/D data flow result=40 05:39:48 Set A/D channel type result=40 05:39:48 Set A/D encoding result=40 05:39:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:48 Set channel filter=0.000000e+000 result=40 05:39:48 Config A/D Result=40 05:39:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:48 Get A/D filter: -9.255963e+061 result=40 05:39:48 Get A/D value=-858993460 result=40 05:39:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:39:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:39:48 Aux= 05:39:48 Message to Camera, serial 54813 queued 05:40:25 Received message from Master: op=PointingHead serial=54825 05:40:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:40:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:40:25 Point started: ret=0 05:40:25 point_skyscan result=0 05:40:26 Check angles 05:40:26 SkyScan query 05:40:26 SkyScan query done: ret=0 az=109.275<-7285 ze=-81.675<-17445 Statuses=0009 0009 05:40:26 Msec=0 True Az=109.275 Ze=-81.675 Az status=0009 Ze status=0009 05:40:27 Check angles 05:40:27 SkyScan query 05:40:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.08<-18872 Statuses=0008 0009 05:40:27 Msec=750 True Az=112.995 Ze=-103.08 Az status=0008 Ze status=0009 05:40:27 Check angles 05:40:27 SkyScan query 05:40:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.99<-20266 Statuses=0008 0009 05:40:28 Msec=1500 True Az=112.995 Ze=-123.99 Az status=0008 Ze status=0009 05:40:28 Check angles 05:40:28 SkyScan query 05:40:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.96<-21664 Statuses=0008 0009 05:40:29 Msec=2250 True Az=112.995 Ze=-144.96 Az status=0008 Ze status=0009 05:40:29 Check angles 05:40:29 SkyScan query 05:40:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.885<-23059 Statuses=0008 0009 05:40:29 Msec=3000 True Az=112.995 Ze=-165.885 Az status=0008 Ze status=0009 05:40:30 Check angles 05:40:30 SkyScan query 05:40:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:40:30 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:40:30 Message to Master queued w/err=0: serial=54825 error=0 05:40:35 Received message from Master: op=Filter serial=54826 05:40:35 Color wheel filter change from 0 to 0 05:40:35 FLIGetFilterPos err=0 currentPosition=0 05:40:35 FLIGetStepsRemaining err=0 RemainingSteps=0 05:40:35 Filter is already there-color wheel unchanged 05:40:35 Received message from Master: op=Shutter serial=54827 05:40:35 Shutter LASER open 05:40:36 Received message from Camera: op=State serial=54829 05:40:36 GetSingleValue result=40 Value=cccccccc 05:40:36 SkyScan query 05:40:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:40:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:36 Parameters OK 05:40:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:36 Set A/D data flow result=40 05:40:36 Set A/D channel type result=40 05:40:36 Set A/D encoding result=40 05:40:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:36 Set channel filter=0.000000e+000 result=40 05:40:36 Config A/D Result=40 05:40:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:36 Get A/D filter: -9.255963e+061 result=40 05:40:36 Get A/D value=-858993460 result=40 05:40:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:36 Parameters OK 05:40:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:36 Set A/D data flow result=40 05:40:36 Set A/D channel type result=40 05:40:36 Set A/D encoding result=40 05:40:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:36 Set channel filter=0.000000e+000 result=40 05:40:36 Config A/D Result=40 05:40:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:36 Get A/D filter: -9.255963e+061 result=40 05:40:36 Get A/D value=-858993460 result=40 05:40:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:40:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:40:36 Aux= 05:40:36 Message to Camera, serial 54829 queued 05:40:45 Received message from Master: op=Shutter serial=54839 05:40:45 Shutter LASER close 05:40:45 Received message from Master: op=PointingHead serial=54843 05:40:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:40:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:40:45 Point started: ret=0 05:40:45 point_skyscan result=0 05:40:46 Check angles 05:40:46 SkyScan query 05:40:47 SkyScan query done: ret=0 az=90.06<-6004 ze=157.47<-1502 Statuses=0009 0009 05:40:47 Msec=0 True Az=90.06 Ze=157.47 Az status=0009 Ze status=0009 05:40:47 Check angles 05:40:47 SkyScan query 05:40:47 SkyScan query done: ret=0 az=72.645<-4843 ze=136.485<-2901 Statuses=0009 0009 05:40:47 Msec=750 True Az=72.645 Ze=136.485 Az status=0009 Ze status=0009 05:40:48 Check angles 05:40:48 SkyScan query 05:40:48 SkyScan query done: ret=0 az=55.17<-3678 ze=115.545<-4297 Statuses=0009 0009 05:40:48 Msec=1500 True Az=55.17 Ze=115.545 Az status=0009 Ze status=0009 05:40:48 Check angles 05:40:48 SkyScan query 05:40:49 SkyScan query done: ret=0 az=40.86<-2724 ze=94.56<-5696 Statuses=0009 0009 05:40:49 Msec=2250 True Az=40.86 Ze=94.56 Az status=0009 Ze status=0009 05:40:49 Check angles 05:40:49 SkyScan query 05:40:50 SkyScan query done: ret=0 az=40.995<-2733 ze=73.65<-7090 Statuses=0008 0009 05:40:50 Msec=3000 True Az=40.995 Ze=73.65 Az status=0008 Ze status=0009 05:40:50 Check angles 05:40:50 SkyScan query 05:40:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.98<-8468 Statuses=0008 0009 05:40:50 Msec=3750 True Az=40.995 Ze=52.98 Az status=0008 Ze status=0009 05:40:51 Check angles 05:40:51 SkyScan query 05:40:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:40:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:40:51 Message to Master queued w/err=0: serial=54843 error=0 05:40:56 Received message from Master: op=Filter serial=54844 05:40:56 Color wheel filter change from 0 to 0 05:40:56 FLIGetFilterPos err=0 currentPosition=0 05:40:56 FLIGetStepsRemaining err=0 RemainingSteps=0 05:40:56 Filter is already there-color wheel unchanged 05:40:56 Received message from Master: op=Shutter serial=54845 05:40:56 Shutter LASER close 05:40:57 Received message from Camera: op=State serial=54847 05:40:57 GetSingleValue result=40 Value=cccccccc 05:40:57 SkyScan query 05:40:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:40:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:57 Parameters OK 05:40:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:57 Set A/D data flow result=40 05:40:57 Set A/D channel type result=40 05:40:57 Set A/D encoding result=40 05:40:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:57 Set channel filter=0.000000e+000 result=40 05:40:57 Config A/D Result=40 05:40:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:57 Get A/D filter: -9.255963e+061 result=40 05:40:57 Get A/D value=-858993460 result=40 05:40:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:57 Parameters OK 05:40:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:57 Set A/D data flow result=40 05:40:57 Set A/D channel type result=40 05:40:57 Set A/D encoding result=40 05:40:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:57 Set channel filter=0.000000e+000 result=40 05:40:57 Config A/D Result=40 05:40:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:57 Get A/D filter: -9.255963e+061 result=40 05:40:57 Get A/D value=-858993460 result=40 05:40:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:40:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:40:57 Aux= 05:40:57 Message to Camera, serial 54847 queued 05:41:33 Received message from Master: op=PointingHead serial=54859 05:41:33 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:41:33 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:41:33 Point started: ret=0 05:41:33 point_skyscan result=0 05:41:34 Check angles 05:41:34 SkyScan query 05:41:35 SkyScan query done: ret=0 az=63.75<-4250 ze=66.555<-7563 Statuses=0009 0008 05:41:35 Msec=0 True Az=63.75 Ze=66.555 Az status=0009 Ze status=0008 05:41:35 Check angles 05:41:35 SkyScan query 05:41:35 SkyScan query done: ret=0 az=81.525<-5435 ze=66.495<-7567 Statuses=0009 0008 05:41:35 Msec=750 True Az=81.525 Ze=66.495 Az status=0009 Ze status=0008 05:41:36 Check angles 05:41:36 SkyScan query 05:41:36 SkyScan query done: ret=0 az=99.12<-6608 ze=66.495<-7567 Statuses=0009 0008 05:41:36 Msec=1500 True Az=99.12 Ze=66.495 Az status=0009 Ze status=0008 05:41:36 Check angles 05:41:36 SkyScan query 05:41:37 SkyScan query done: ret=0 az=116.73<-7782 ze=66.495<-7567 Statuses=0009 0008 05:41:37 Msec=2250 True Az=116.73 Ze=66.495 Az status=0009 Ze status=0008 05:41:37 Check angles 05:41:37 SkyScan query 05:41:38 SkyScan query done: ret=0 az=134.235<-8949 ze=66.495<-7567 Statuses=0009 0008 05:41:38 Msec=3000 True Az=134.235 Ze=66.495 Az status=0009 Ze status=0008 05:41:38 Check angles 05:41:38 SkyScan query 05:41:38 SkyScan query done: ret=0 az=151.53<-10102 ze=66.495<-7567 Statuses=0009 0008 05:41:38 Msec=3750 True Az=151.53 Ze=66.495 Az status=0009 Ze status=0008 05:41:39 Check angles 05:41:39 SkyScan query 05:41:39 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:41:39 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 05:41:39 Message to Master queued w/err=0: serial=54859 error=0 05:41:44 Received message from Master: op=Filter serial=54860 05:41:44 Color wheel filter change from 0 to 0 05:41:44 FLIGetFilterPos err=0 currentPosition=0 05:41:44 FLIGetStepsRemaining err=0 RemainingSteps=0 05:41:44 Filter is already there-color wheel unchanged 05:41:44 Received message from Master: op=Shutter serial=54861 05:41:44 Shutter LASER close 05:41:44 Received message from Camera: op=State serial=54863 05:41:44 GetSingleValue result=40 Value=cccccccc 05:41:44 SkyScan query 05:41:45 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:41:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:45 Parameters OK 05:41:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:45 Set A/D data flow result=40 05:41:45 Set A/D channel type result=40 05:41:45 Set A/D encoding result=40 05:41:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:45 Set channel filter=0.000000e+000 result=40 05:41:45 Config A/D Result=40 05:41:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:45 Get A/D filter: -9.255963e+061 result=40 05:41:45 Get A/D value=-858993460 result=40 05:41:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:45 Parameters OK 05:41:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:45 Set A/D data flow result=40 05:41:45 Set A/D channel type result=40 05:41:45 Set A/D encoding result=40 05:41:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:45 Set channel filter=0.000000e+000 result=40 05:41:45 Config A/D Result=40 05:41:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:45 Get A/D filter: -9.255963e+061 result=40 05:41:45 Get A/D value=-858993460 result=40 05:41:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:45 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:41:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:41:45 Aux= 05:41:45 Message to Camera, serial 54863 queued 05:42:22 Received message from Master: op=PointingHead serial=54876 05:42:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:42:22 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:42:22 Point started: ret=0 05:42:22 point_skyscan result=0 05:42:23 Check angles 05:42:23 SkyScan query 05:42:23 SkyScan query done: ret=0 az=134.985<-8999 ze=36.675<-9555 Statuses=0009 0009 05:42:23 Msec=0 True Az=134.985 Ze=36.675 Az status=0009 Ze status=0009 05:42:24 Check angles 05:42:24 SkyScan query 05:42:24 SkyScan query done: ret=0 az=117.51<-7834 ze=15.735<-10951 Statuses=0009 0009 05:42:24 Msec=750 True Az=117.51 Ze=15.735 Az status=0009 Ze status=0009 05:42:24 Check angles 05:42:24 SkyScan query 05:42:25 SkyScan query done: ret=0 az=100.125<-6675 ze=-5.25<-12350 Statuses=0009 0009 05:42:25 Msec=1500 True Az=100.125 Ze=-5.25 Az status=0009 Ze status=0009 05:42:25 Check angles 05:42:25 SkyScan query 05:42:26 SkyScan query done: ret=0 az=82.605<-5507 ze=-26.205<-13747 Statuses=0009 0009 05:42:26 Msec=2250 True Az=82.605 Ze=-26.205 Az status=0009 Ze status=0009 05:42:26 Check angles 05:42:26 SkyScan query 05:42:26 SkyScan query done: ret=0 az=64.65<-4310 ze=-38.565<-14571 Statuses=0009 0008 05:42:26 Msec=3000 True Az=64.65 Ze=-38.565 Az status=0009 Ze status=0008 05:42:27 Check angles 05:42:27 SkyScan query 05:42:27 SkyScan query done: ret=0 az=47.025<-3135 ze=-38.535<-14569 Statuses=0009 0008 05:42:27 Msec=3750 True Az=47.025 Ze=-38.535 Az status=0009 Ze status=0008 05:42:27 Check angles 05:42:27 SkyScan query 05:42:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:42:28 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:42:28 Message to Master queued w/err=0: serial=54876 error=0 05:42:33 Received message from Master: op=Filter serial=54877 05:42:33 Color wheel filter change from 0 to 0 05:42:33 FLIGetFilterPos err=0 currentPosition=0 05:42:33 FLIGetStepsRemaining err=0 RemainingSteps=0 05:42:33 Filter is already there-color wheel unchanged 05:42:33 Received message from Master: op=Shutter serial=54878 05:42:33 Shutter LASER close 05:42:33 Received message from Camera: op=State serial=54880 05:42:33 GetSingleValue result=40 Value=cccccccc 05:42:33 SkyScan query 05:42:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:42:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:34 Parameters OK 05:42:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:34 Set A/D data flow result=40 05:42:34 Set A/D channel type result=40 05:42:34 Set A/D encoding result=40 05:42:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:34 Set channel filter=0.000000e+000 result=40 05:42:34 Config A/D Result=40 05:42:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:34 Get A/D filter: -9.255963e+061 result=40 05:42:34 Get A/D value=-858993460 result=40 05:42:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:34 Parameters OK 05:42:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:34 Set A/D data flow result=40 05:42:34 Set A/D channel type result=40 05:42:34 Set A/D encoding result=40 05:42:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:34 Set channel filter=0.000000e+000 result=40 05:42:34 Config A/D Result=40 05:42:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:34 Get A/D filter: -9.255963e+061 result=40 05:42:34 Get A/D value=-858993460 result=40 05:42:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:42:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:42:34 Aux= 05:42:34 Message to Camera, serial 54880 queued 05:43:11 Received message from Master: op=PointingHead serial=54893 05:43:11 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:43:11 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:43:11 Point started: ret=0 05:43:11 point_skyscan result=0 05:43:12 Check angles 05:43:12 SkyScan query 05:43:12 SkyScan query done: ret=0 az=63.75<-4250 ze=-67.98<-16532 Statuses=0009 0009 05:43:12 Msec=0 True Az=63.75 Ze=-67.98 Az status=0009 Ze status=0009 05:43:12 Check angles 05:43:12 SkyScan query 05:43:13 SkyScan query done: ret=0 az=81.045<-5403 ze=-88.95<-17930 Statuses=0009 0009 05:43:13 Msec=750 True Az=81.045 Ze=-88.95 Az status=0009 Ze status=0009 05:43:13 Check angles 05:43:13 SkyScan query 05:43:14 SkyScan query done: ret=0 az=98.64<-6576 ze=-109.875<-19325 Statuses=0009 0009 05:43:14 Msec=1500 True Az=98.64 Ze=-109.875 Az status=0009 Ze status=0009 05:43:14 Check angles 05:43:14 SkyScan query 05:43:15 SkyScan query done: ret=0 az=116.19<-7746 ze=-130.86<-20724 Statuses=0009 0009 05:43:15 Msec=2250 True Az=116.19 Ze=-130.86 Az status=0009 Ze status=0009 05:43:15 Check angles 05:43:15 SkyScan query 05:43:15 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 05:43:15 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 05:43:15 Check angles 05:43:15 SkyScan query 05:43:16 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:43:16 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:43:16 Message to Master queued w/err=0: serial=54893 error=0 05:43:21 Received message from Master: op=Filter serial=54894 05:43:21 Color wheel filter change from 0 to 0 05:43:21 FLIGetFilterPos err=0 currentPosition=0 05:43:21 FLIGetStepsRemaining err=0 RemainingSteps=0 05:43:21 Filter is already there-color wheel unchanged 05:43:21 Received message from Master: op=Shutter serial=54895 05:43:21 Shutter LASER close 05:43:21 Received message from Camera: op=State serial=54897 05:43:21 GetSingleValue result=40 Value=cccccccc 05:43:21 SkyScan query 05:43:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:43:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:22 Parameters OK 05:43:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:22 Set A/D data flow result=40 05:43:22 Set A/D channel type result=40 05:43:22 Set A/D encoding result=40 05:43:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:22 Set channel filter=0.000000e+000 result=40 05:43:22 Config A/D Result=40 05:43:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:22 Get A/D filter: -9.255963e+061 result=40 05:43:22 Get A/D value=-858993460 result=40 05:43:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:22 Parameters OK 05:43:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:22 Set A/D data flow result=40 05:43:22 Set A/D channel type result=40 05:43:22 Set A/D encoding result=40 05:43:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:22 Set channel filter=0.000000e+000 result=40 05:43:22 Config A/D Result=40 05:43:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:22 Get A/D filter: -9.255963e+061 result=40 05:43:22 Get A/D value=-858993460 result=40 05:43:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:22 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:43:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:43:22 Aux= 05:43:22 Message to Camera, serial 54897 queued 05:43:59 Received message from Master: op=PointingHead serial=54910 05:43:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:43:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:43:59 Point started: ret=0 05:43:59 point_skyscan result=0 05:44:00 Check angles 05:44:00 SkyScan query 05:44:00 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.91<-23394 Statuses=0009 0009 05:44:00 Msec=0 True Az=113.01 Ze=-170.91 Az status=0009 Ze status=0009 05:44:01 Check angles 05:44:01 SkyScan query 05:44:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:44:01 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:44:01 Message to Master queued w/err=0: serial=54910 error=0 05:44:06 Received message from Master: op=Filter serial=54911 05:44:06 Color wheel filter change from 0 to 0 05:44:06 FLIGetFilterPos err=0 currentPosition=0 05:44:06 FLIGetStepsRemaining err=0 RemainingSteps=0 05:44:06 Filter is already there-color wheel unchanged 05:44:06 Received message from Master: op=Shutter serial=54912 05:44:06 Shutter LASER open 05:44:06 Received message from Camera: op=State serial=54914 05:44:06 GetSingleValue result=40 Value=cccccccc 05:44:06 SkyScan query 05:44:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:44:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:07 Parameters OK 05:44:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:07 Set A/D data flow result=40 05:44:07 Set A/D channel type result=40 05:44:07 Set A/D encoding result=40 05:44:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:07 Set channel filter=0.000000e+000 result=40 05:44:07 Config A/D Result=40 05:44:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:07 Get A/D filter: -9.255963e+061 result=40 05:44:07 Get A/D value=-858993460 result=40 05:44:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:07 Parameters OK 05:44:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:07 Set A/D data flow result=40 05:44:07 Set A/D channel type result=40 05:44:07 Set A/D encoding result=40 05:44:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:07 Set channel filter=0.000000e+000 result=40 05:44:07 Config A/D Result=40 05:44:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:07 Get A/D filter: -9.255963e+061 result=40 05:44:07 Get A/D value=-858993460 result=40 05:44:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:44:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:44:07 Aux= 05:44:07 Message to Camera, serial 54914 queued 05:44:15 Received message from Master: op=Shutter serial=54924 05:44:15 Shutter LASER close 05:44:16 Received message from Master: op=PointingHead serial=54928 05:44:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:44:16 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:44:16 Point started: ret=0 05:44:16 point_skyscan result=0 05:44:17 Check angles 05:44:17 SkyScan query 05:44:18 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.4<-21560 Statuses=0009 0009 05:44:18 Msec=0 True Az=135.825 Ze=-143.4 Az status=0009 Ze status=0009 05:44:18 Check angles 05:44:18 SkyScan query 05:44:18 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.445<-20163 Statuses=0009 0009 05:44:18 Msec=750 True Az=153.36 Ze=-122.445 Az status=0009 Ze status=0009 05:44:19 Check angles 05:44:19 SkyScan query 05:44:19 SkyScan query done: ret=0 az=170.76<-11384 ze=-101.55<-18770 Statuses=0009 0009 05:44:19 Msec=1500 True Az=170.76 Ze=-101.55 Az status=0009 Ze status=0009 05:44:19 Check angles 05:44:19 SkyScan query 05:44:20 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.115<-17341 Statuses=0008 0009 05:44:20 Msec=2250 True Az=176.025 Ze=-80.115 Az status=0008 Ze status=0009 05:44:20 Check angles 05:44:20 SkyScan query 05:44:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.115<-15941 Statuses=0008 0009 05:44:21 Msec=3000 True Az=175.995 Ze=-59.115 Az status=0008 Ze status=0009 05:44:21 Check angles 05:44:21 SkyScan query 05:44:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:44:21 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:44:21 Message to Master queued w/err=0: serial=54928 error=0 05:44:26 Received message from Master: op=Filter serial=54929 05:44:26 Color wheel filter change from 0 to 0 05:44:26 FLIGetFilterPos err=0 currentPosition=0 05:44:26 FLIGetStepsRemaining err=0 RemainingSteps=0 05:44:26 Filter is already there-color wheel unchanged 05:44:27 Received message from Master: op=Shutter serial=54930 05:44:27 Shutter LASER close 05:44:27 Received message from Camera: op=State serial=54932 05:44:27 GetSingleValue result=40 Value=cccccccc 05:44:27 SkyScan query 05:44:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:44:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:27 Parameters OK 05:44:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:27 Set A/D data flow result=40 05:44:27 Set A/D channel type result=40 05:44:27 Set A/D encoding result=40 05:44:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:27 Set channel filter=0.000000e+000 result=40 05:44:27 Config A/D Result=40 05:44:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:27 Get A/D filter: -9.255963e+061 result=40 05:44:27 Get A/D value=-858993460 result=40 05:44:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:27 Parameters OK 05:44:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:27 Set A/D data flow result=40 05:44:27 Set A/D channel type result=40 05:44:27 Set A/D encoding result=40 05:44:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:27 Set channel filter=0.000000e+000 result=40 05:44:27 Config A/D Result=40 05:44:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:27 Get A/D filter: -9.255963e+061 result=40 05:44:27 Get A/D value=-858993460 result=40 05:44:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:44:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:44:27 Aux= 05:44:27 Message to Camera, serial 54932 queued 05:45:04 Received message from Master: op=PointingHead serial=54945 05:45:04 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:45:04 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:45:05 Point started: ret=0 05:45:05 point_skyscan result=0 05:45:05 Check angles 05:45:05 SkyScan query 05:45:06 SkyScan query done: ret=0 az=153<-10200 ze=-21.84<-13456 Statuses=0009 0009 05:45:06 Msec=0 True Az=153 Ze=-21.84 Az status=0009 Ze status=0009 05:45:06 Check angles 05:45:06 SkyScan query 05:45:07 SkyScan query done: ret=0 az=135.21<-9014 ze=-0.42<-12028 Statuses=0009 0009 05:45:07 Msec=750 True Az=135.21 Ze=-0.42 Az status=0009 Ze status=0009 05:45:07 Check angles 05:45:07 SkyScan query 05:45:07 SkyScan query done: ret=0 az=117.075<-7805 ze=21<-10600 Statuses=0009 0009 05:45:07 Msec=1500 True Az=117.075 Ze=21 Az status=0009 Ze status=0009 05:45:08 Check angles 05:45:08 SkyScan query 05:45:08 SkyScan query done: ret=0 az=99.795<-6653 ze=41.925<-9205 Statuses=0009 0009 05:45:08 Msec=2250 True Az=99.795 Ze=41.925 Az status=0009 Ze status=0009 05:45:08 Check angles 05:45:08 SkyScan query 05:45:09 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 05:45:09 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 05:45:09 Check angles 05:45:09 SkyScan query 05:45:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:45:10 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:45:10 Message to Master queued w/err=0: serial=54945 error=0 05:45:15 Received message from Master: op=Filter serial=54946 05:45:15 Color wheel filter change from 0 to 0 05:45:15 FLIGetFilterPos err=0 currentPosition=0 05:45:15 FLIGetStepsRemaining err=0 RemainingSteps=0 05:45:15 Filter is already there-color wheel unchanged 05:45:15 Received message from Master: op=Shutter serial=54947 05:45:15 Shutter LASER close 05:45:15 Received message from Camera: op=State serial=54949 05:45:15 GetSingleValue result=40 Value=cccccccc 05:45:15 SkyScan query 05:45:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:45:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:15 Parameters OK 05:45:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:15 Set A/D data flow result=40 05:45:15 Set A/D channel type result=40 05:45:15 Set A/D encoding result=40 05:45:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:15 Set channel filter=0.000000e+000 result=40 05:45:15 Config A/D Result=40 05:45:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:15 Get A/D filter: -9.255963e+061 result=40 05:45:15 Get A/D value=-858993460 result=40 05:45:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:15 Parameters OK 05:45:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:15 Set A/D data flow result=40 05:45:15 Set A/D channel type result=40 05:45:15 Set A/D encoding result=40 05:45:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:15 Set channel filter=0.000000e+000 result=40 05:45:15 Config A/D Result=40 05:45:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:15 Get A/D filter: -9.255963e+061 result=40 05:45:15 Get A/D value=-858993460 result=40 05:45:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:45:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:45:15 Aux= 05:45:15 Message to Camera, serial 54949 queued 05:45:29 Received message from Master: op=Identify serial=54950 05:45:52 Received message from Master: op=PointingHead serial=54965 05:45:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:45:52 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:45:53 Point started: ret=0 05:45:53 point_skyscan result=0 05:45:53 Check angles 05:45:53 SkyScan query 05:45:54 SkyScan query done: ret=0 az=108.825<-7255 ze=38.49<-9434 Statuses=0009 0008 05:45:54 Msec=0 True Az=108.825 Ze=38.49 Az status=0009 Ze status=0008 05:45:54 Check angles 05:45:54 SkyScan query 05:45:55 SkyScan query done: ret=0 az=126.375<-8425 ze=38.505<-9433 Statuses=0009 0008 05:45:55 Msec=750 True Az=126.375 Ze=38.505 Az status=0009 Ze status=0008 05:45:55 Check angles 05:45:55 SkyScan query 05:45:56 SkyScan query done: ret=0 az=143.835<-9589 ze=38.505<-9433 Statuses=0009 0008 05:45:56 Msec=1500 True Az=143.835 Ze=38.505 Az status=0009 Ze status=0008 05:45:56 Check angles [UTC 2018-12-11 05:45:56] 05:45:56 SkyScan query 05:45:56 SkyScan query done: ret=0 az=162.72<-10848 ze=38.505<-9433 Statuses=0009 0008 05:45:56 Msec=2250 True Az=162.72 Ze=38.505 Az status=0009 Ze status=0008 05:45:56 Check angles 05:45:56 SkyScan query 05:45:57 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 05:45:57 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 05:45:57 Check angles 05:45:57 SkyScan query 05:45:58 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:45:58 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:45:58 Message to Master queued w/err=0: serial=54965 error=0 05:46:03 Received message from Master: op=Filter serial=54966 05:46:03 Color wheel filter change from 0 to 0 05:46:03 FLIGetFilterPos err=0 currentPosition=0 05:46:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:46:03 Filter is already there-color wheel unchanged 05:46:03 Received message from Master: op=Shutter serial=54967 05:46:03 Shutter LASER close 05:46:03 Received message from Camera: op=State serial=54969 05:46:03 GetSingleValue result=40 Value=cccccccc 05:46:03 SkyScan query 05:46:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:46:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:04 Parameters OK 05:46:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:04 Set A/D data flow result=40 05:46:04 Set A/D channel type result=40 05:46:04 Set A/D encoding result=40 05:46:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:04 Set channel filter=0.000000e+000 result=40 05:46:04 Config A/D Result=40 05:46:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:04 Get A/D filter: -9.255963e+061 result=40 05:46:04 Get A/D value=-858993460 result=40 05:46:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:04 Parameters OK 05:46:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:04 Set A/D data flow result=40 05:46:04 Set A/D channel type result=40 05:46:04 Set A/D encoding result=40 05:46:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:04 Set channel filter=0.000000e+000 result=40 05:46:04 Config A/D Result=40 05:46:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:04 Get A/D filter: -9.255963e+061 result=40 05:46:04 Get A/D value=-858993460 result=40 05:46:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:46:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:46:04 Aux= 05:46:04 Message to Camera, serial 54969 queued 05:46:40 Received message from Master: op=PointingHead serial=54982 05:46:40 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:46:40 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:46:41 Point started: ret=0 05:46:41 point_skyscan result=0 05:46:41 Check angles 05:46:41 SkyScan query 05:46:42 SkyScan query done: ret=0 az=152.985<-10199 ze=8.64<-11424 Statuses=0009 0009 05:46:42 Msec=0 True Az=152.985 Ze=8.64 Az status=0009 Ze status=0009 05:46:42 Check angles 05:46:42 SkyScan query 05:46:43 SkyScan query done: ret=0 az=135.465<-9031 ze=-12.345<-12823 Statuses=0009 0009 05:46:43 Msec=750 True Az=135.465 Ze=-12.345 Az status=0009 Ze status=0009 05:46:43 Check angles 05:46:43 SkyScan query 05:46:44 SkyScan query done: ret=0 az=118.005<-7867 ze=-33.255<-14217 Statuses=0009 0009 05:46:44 Msec=1500 True Az=118.005 Ze=-33.255 Az status=0009 Ze status=0009 05:46:44 Check angles 05:46:44 SkyScan query 05:46:44 SkyScan query done: ret=0 az=100.2<-6680 ze=-51.555<-15437 Statuses=0009 0009 05:46:44 Msec=2250 True Az=100.2 Ze=-51.555 Az status=0009 Ze status=0009 05:46:44 Check angles 05:46:44 SkyScan query 05:46:45 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 05:46:45 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 05:46:45 Check angles 05:46:45 SkyScan query 05:46:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:46:46 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:46:46 Message to Master queued w/err=0: serial=54982 error=0 05:46:51 Received message from Master: op=Filter serial=54983 05:46:51 Color wheel filter change from 0 to 0 05:46:51 FLIGetFilterPos err=0 currentPosition=0 05:46:51 FLIGetStepsRemaining err=0 RemainingSteps=0 05:46:51 Filter is already there-color wheel unchanged 05:46:51 Received message from Master: op=Shutter serial=54984 05:46:51 Shutter LASER close 05:46:51 Received message from Camera: op=State serial=54986 05:46:51 GetSingleValue result=40 Value=cccccccc 05:46:51 SkyScan query 05:46:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:46:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:52 Parameters OK 05:46:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:52 Set A/D data flow result=40 05:46:52 Set A/D channel type result=40 05:46:52 Set A/D encoding result=40 05:46:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:52 Set channel filter=0.000000e+000 result=40 05:46:52 Config A/D Result=40 05:46:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:52 Get A/D filter: -9.255963e+061 result=40 05:46:52 Get A/D value=-858993460 result=40 05:46:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:52 Parameters OK 05:46:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:52 Set A/D data flow result=40 05:46:52 Set A/D channel type result=40 05:46:52 Set A/D encoding result=40 05:46:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:52 Set channel filter=0.000000e+000 result=40 05:46:52 Config A/D Result=40 05:46:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:52 Get A/D filter: -9.255963e+061 result=40 05:46:52 Get A/D value=-858993460 result=40 05:46:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:46:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:46:52 Aux= 05:46:52 Message to Camera, serial 54986 queued 05:47:28 Received message from Master: op=PointingHead serial=54999 05:47:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:47:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:47:29 Point started: ret=0 05:47:29 point_skyscan result=0 05:47:30 Check angles 05:47:30 SkyScan query 05:47:30 SkyScan query done: ret=0 az=109.005<-7267 ze=-81.345<-17423 Statuses=0009 0009 05:47:30 Msec=0 True Az=109.005 Ze=-81.345 Az status=0009 Ze status=0009 05:47:30 Check angles 05:47:30 SkyScan query 05:47:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.75<-18850 Statuses=0008 0009 05:47:31 Msec=750 True Az=112.995 Ze=-102.75 Az status=0008 Ze status=0009 05:47:31 Check angles 05:47:31 SkyScan query 05:47:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.69<-20246 Statuses=0008 0009 05:47:32 Msec=1500 True Az=112.995 Ze=-123.69 Az status=0008 Ze status=0009 05:47:32 Check angles 05:47:32 SkyScan query 05:47:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.66<-21644 Statuses=0008 0009 05:47:32 Msec=2250 True Az=112.995 Ze=-144.66 Az status=0008 Ze status=0009 05:47:33 Check angles 05:47:33 SkyScan query 05:47:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.57<-23038 Statuses=0008 0009 05:47:33 Msec=3000 True Az=112.995 Ze=-165.57 Az status=0008 Ze status=0009 05:47:33 Check angles 05:47:33 SkyScan query 05:47:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:47:34 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:47:34 Message to Master queued w/err=0: serial=54999 error=0 05:47:39 Received message from Master: op=Filter serial=55000 05:47:39 Color wheel filter change from 0 to 0 05:47:39 FLIGetFilterPos err=0 currentPosition=0 05:47:39 FLIGetStepsRemaining err=0 RemainingSteps=0 05:47:39 Filter is already there-color wheel unchanged 05:47:39 Received message from Master: op=Shutter serial=55001 05:47:39 Shutter LASER open 05:47:39 Received message from Camera: op=State serial=55003 05:47:39 GetSingleValue result=40 Value=cccccccc 05:47:39 SkyScan query 05:47:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:47:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:40 Parameters OK 05:47:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:40 Set A/D data flow result=40 05:47:40 Set A/D channel type result=40 05:47:40 Set A/D encoding result=40 05:47:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:40 Set channel filter=0.000000e+000 result=40 05:47:40 Config A/D Result=40 05:47:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:40 Get A/D filter: -9.255963e+061 result=40 05:47:40 Get A/D value=-858993460 result=40 05:47:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:40 Parameters OK 05:47:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:40 Set A/D data flow result=40 05:47:40 Set A/D channel type result=40 05:47:40 Set A/D encoding result=40 05:47:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:40 Set channel filter=0.000000e+000 result=40 05:47:40 Config A/D Result=40 05:47:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:40 Get A/D filter: -9.255963e+061 result=40 05:47:40 Get A/D value=-858993460 result=40 05:47:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:47:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:47:40 Aux= 05:47:40 Message to Camera, serial 55003 queued 05:47:48 Received message from Master: op=Shutter serial=55013 05:47:48 Shutter LASER close 05:47:49 Received message from Master: op=PointingHead serial=55017 05:47:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:47:49 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:47:49 Point started: ret=0 05:47:49 point_skyscan result=0 05:47:50 Check angles 05:47:50 SkyScan query 05:47:50 SkyScan query done: ret=0 az=89.85<-5990 ze=157.215<-1519 Statuses=0009 0009 05:47:50 Msec=0 True Az=89.85 Ze=157.215 Az status=0009 Ze status=0009 05:47:51 Check angles 05:47:51 SkyScan query 05:47:51 SkyScan query done: ret=0 az=72.315<-4821 ze=136.23<-2918 Statuses=0009 0009 05:47:51 Msec=750 True Az=72.315 Ze=136.23 Az status=0009 Ze status=0009 05:47:51 Check angles 05:47:51 SkyScan query 05:47:52 SkyScan query done: ret=0 az=54.96<-3664 ze=115.305<-4313 Statuses=0009 0009 05:47:52 Msec=1500 True Az=54.96 Ze=115.305 Az status=0009 Ze status=0009 05:47:52 Check angles 05:47:52 SkyScan query 05:47:53 SkyScan query done: ret=0 az=40.905<-2727 ze=93.84<-5744 Statuses=0009 0009 05:47:53 Msec=2250 True Az=40.905 Ze=93.84 Az status=0009 Ze status=0009 05:47:53 Check angles 05:47:53 SkyScan query 05:47:53 SkyScan query done: ret=0 az=40.995<-2733 ze=72.9<-7140 Statuses=0008 0009 05:47:53 Msec=3000 True Az=40.995 Ze=72.9 Az status=0008 Ze status=0009 05:47:54 Check angles 05:47:54 SkyScan query 05:47:54 SkyScan query done: ret=0 az=40.995<-2733 ze=52.515<-8499 Statuses=0008 0009 05:47:54 Msec=3750 True Az=40.995 Ze=52.515 Az status=0008 Ze status=0009 05:47:54 Check angles 05:47:54 SkyScan query 05:47:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:47:55 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:47:55 Message to Master queued w/err=0: serial=55017 error=0 05:48:00 Received message from Master: op=Filter serial=55018 05:48:00 Color wheel filter change from 0 to 0 05:48:00 FLIGetFilterPos err=0 currentPosition=0 05:48:00 FLIGetStepsRemaining err=0 RemainingSteps=0 05:48:00 Filter is already there-color wheel unchanged 05:48:00 Received message from Master: op=Shutter serial=55019 05:48:00 Shutter LASER close 05:48:00 Received message from Camera: op=State serial=55021 05:48:00 GetSingleValue result=40 Value=cccccccc 05:48:00 SkyScan query 05:48:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:48:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:01 Parameters OK 05:48:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:01 Set A/D data flow result=40 05:48:01 Set A/D channel type result=40 05:48:01 Set A/D encoding result=40 05:48:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:01 Set channel filter=0.000000e+000 result=40 05:48:01 Config A/D Result=40 05:48:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:01 Get A/D filter: -9.255963e+061 result=40 05:48:01 Get A/D value=-858993460 result=40 05:48:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:01 Parameters OK 05:48:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:01 Set A/D data flow result=40 05:48:01 Set A/D channel type result=40 05:48:01 Set A/D encoding result=40 05:48:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:01 Set channel filter=0.000000e+000 result=40 05:48:01 Config A/D Result=40 05:48:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:01 Get A/D filter: -9.255963e+061 result=40 05:48:01 Get A/D value=-858993460 result=40 05:48:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:48:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:48:01 Aux= 05:48:01 Message to Camera, serial 55021 queued 05:48:38 Received message from Master: op=PointingHead serial=55034 05:48:38 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:48:38 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:48:38 Point started: ret=0 05:48:38 point_skyscan result=0 05:48:39 Check angles 05:48:39 SkyScan query 05:48:39 SkyScan query done: ret=0 az=64.455<-4297 ze=66.555<-7563 Statuses=0009 0008 05:48:39 Msec=0 True Az=64.455 Ze=66.555 Az status=0009 Ze status=0008 05:48:40 Check angles 05:48:40 SkyScan query 05:48:40 SkyScan query done: ret=0 az=81.795<-5453 ze=66.495<-7567 Statuses=0009 0008 05:48:40 Msec=750 True Az=81.795 Ze=66.495 Az status=0009 Ze status=0008 05:48:40 Check angles 05:48:40 SkyScan query 05:48:41 SkyScan query done: ret=0 az=99.45<-6630 ze=66.495<-7567 Statuses=0009 0008 05:48:41 Msec=1500 True Az=99.45 Ze=66.495 Az status=0009 Ze status=0008 05:48:41 Check angles 05:48:41 SkyScan query 05:48:42 SkyScan query done: ret=0 az=116.955<-7797 ze=66.495<-7567 Statuses=0009 0008 05:48:42 Msec=2250 True Az=116.955 Ze=66.495 Az status=0009 Ze status=0008 05:48:42 Check angles 05:48:42 SkyScan query 05:48:42 SkyScan query done: ret=0 az=134.4<-8960 ze=66.495<-7567 Statuses=0009 0008 05:48:42 Msec=3000 True Az=134.4 Ze=66.495 Az status=0009 Ze status=0008 05:48:43 Check angles 05:48:43 SkyScan query 05:48:43 SkyScan query done: ret=0 az=151.905<-10127 ze=66.495<-7567 Statuses=0009 0008 05:48:43 Msec=3750 True Az=151.905 Ze=66.495 Az status=0009 Ze status=0008 05:48:43 Check angles 05:48:43 SkyScan query 05:48:44 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 05:48:44 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 05:48:44 Message to Master queued w/err=0: serial=55034 error=0 05:48:49 Received message from Master: op=Filter serial=55035 05:48:49 Color wheel filter change from 0 to 0 05:48:49 FLIGetFilterPos err=0 currentPosition=0 05:48:49 FLIGetStepsRemaining err=0 RemainingSteps=0 05:48:49 Filter is already there-color wheel unchanged 05:48:49 Received message from Master: op=Shutter serial=55036 05:48:49 Shutter LASER close 05:48:49 Received message from Camera: op=State serial=55038 05:48:49 GetSingleValue result=40 Value=cccccccc 05:48:49 SkyScan query 05:48:50 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:48:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:50 Parameters OK 05:48:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:50 Set A/D data flow result=40 05:48:50 Set A/D channel type result=40 05:48:50 Set A/D encoding result=40 05:48:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:50 Set channel filter=0.000000e+000 result=40 05:48:50 Config A/D Result=40 05:48:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:50 Get A/D filter: -9.255963e+061 result=40 05:48:50 Get A/D value=-858993460 result=40 05:48:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:50 Parameters OK 05:48:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:50 Set A/D data flow result=40 05:48:50 Set A/D channel type result=40 05:48:50 Set A/D encoding result=40 05:48:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:50 Set channel filter=0.000000e+000 result=40 05:48:50 Config A/D Result=40 05:48:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:50 Get A/D filter: -9.255963e+061 result=40 05:48:50 Get A/D value=-858993460 result=40 05:48:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:50 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:48:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:48:50 Aux= 05:48:50 Message to Camera, serial 55038 queued 05:49:26 Received message from Master: op=PointingHead serial=55051 05:49:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:49:26 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:49:27 Point started: ret=0 05:49:27 point_skyscan result=0 05:49:28 Check angles 05:49:28 SkyScan query 05:49:28 SkyScan query done: ret=0 az=135<-9000 ze=36.75<-9550 Statuses=0009 0009 05:49:28 Msec=0 True Az=135 Ze=36.75 Az status=0009 Ze status=0009 05:49:28 Check angles 05:49:28 SkyScan query 05:49:29 SkyScan query done: ret=0 az=117.51<-7834 ze=15.795<-10947 Statuses=0009 0009 05:49:29 Msec=750 True Az=117.51 Ze=15.795 Az status=0009 Ze status=0009 05:49:29 Check angles 05:49:29 SkyScan query 05:49:30 SkyScan query done: ret=0 az=100.14<-6676 ze=-5.16<-12344 Statuses=0009 0009 05:49:30 Msec=1500 True Az=100.14 Ze=-5.16 Az status=0009 Ze status=0009 05:49:30 Check angles 05:49:30 SkyScan query 05:49:30 SkyScan query done: ret=0 az=82.665<-5511 ze=-26.1<-13740 Statuses=0009 0009 05:49:30 Msec=2250 True Az=82.665 Ze=-26.1 Az status=0009 Ze status=0009 05:49:31 Check angles 05:49:31 SkyScan query 05:49:31 SkyScan query done: ret=0 az=64.8<-4320 ze=-38.565<-14571 Statuses=0009 0008 05:49:31 Msec=3000 True Az=64.8 Ze=-38.565 Az status=0009 Ze status=0008 05:49:31 Check angles 05:49:31 SkyScan query 05:49:32 SkyScan query done: ret=0 az=47.34<-3156 ze=-38.535<-14569 Statuses=0009 0008 05:49:32 Msec=3750 True Az=47.34 Ze=-38.535 Az status=0009 Ze status=0008 05:49:32 Check angles 05:49:32 SkyScan query 05:49:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:49:33 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:49:33 Message to Master queued w/err=0: serial=55051 error=0 05:49:38 Received message from Master: op=Filter serial=55052 05:49:38 Color wheel filter change from 0 to 0 05:49:38 FLIGetFilterPos err=0 currentPosition=0 05:49:38 FLIGetStepsRemaining err=0 RemainingSteps=0 05:49:38 Filter is already there-color wheel unchanged 05:49:38 Received message from Master: op=Shutter serial=55053 05:49:38 Shutter LASER close 05:49:38 Received message from Camera: op=State serial=55055 05:49:38 GetSingleValue result=40 Value=cccccccc 05:49:38 SkyScan query 05:49:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:49:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:38 Parameters OK 05:49:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:38 Set A/D data flow result=40 05:49:38 Set A/D channel type result=40 05:49:38 Set A/D encoding result=40 05:49:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:38 Set channel filter=0.000000e+000 result=40 05:49:38 Config A/D Result=40 05:49:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:38 Get A/D filter: -9.255963e+061 result=40 05:49:38 Get A/D value=-858993460 result=40 05:49:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:38 Parameters OK 05:49:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:38 Set A/D data flow result=40 05:49:38 Set A/D channel type result=40 05:49:38 Set A/D encoding result=40 05:49:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:38 Set channel filter=0.000000e+000 result=40 05:49:38 Config A/D Result=40 05:49:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:38 Get A/D filter: -9.255963e+061 result=40 05:49:38 Get A/D value=-858993460 result=40 05:49:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:49:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:49:38 Aux= 05:49:38 Message to Camera, serial 55055 queued 05:50:15 Received message from Master: op=PointingHead serial=55068 05:50:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:50:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:50:16 Point started: ret=0 05:50:16 point_skyscan result=0 05:50:16 Check angles 05:50:16 SkyScan query 05:50:17 SkyScan query done: ret=0 az=64.02<-4268 ze=-68.295<-16553 Statuses=0009 0009 05:50:17 Msec=0 True Az=64.02 Ze=-68.295 Az status=0009 Ze status=0009 05:50:17 Check angles 05:50:17 SkyScan query 05:50:18 SkyScan query done: ret=0 az=81.78<-5452 ze=-89.745<-17983 Statuses=0009 0009 05:50:18 Msec=750 True Az=81.78 Ze=-89.745 Az status=0009 Ze status=0009 05:50:18 Check angles 05:50:18 SkyScan query 05:50:18 SkyScan query done: ret=0 az=99.465<-6631 ze=-110.685<-19379 Statuses=0009 0009 05:50:18 Msec=1500 True Az=99.465 Ze=-110.685 Az status=0009 Ze status=0009 05:50:19 Check angles 05:50:19 SkyScan query 05:50:19 SkyScan query done: ret=0 az=116.955<-7797 ze=-131.625<-20775 Statuses=0009 0009 05:50:19 Msec=2250 True Az=116.955 Ze=-131.625 Az status=0009 Ze status=0009 05:50:19 Check angles 05:50:19 SkyScan query 05:50:20 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 05:50:20 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 05:50:20 Check angles 05:50:20 SkyScan query 05:50:21 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:50:21 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:50:21 Message to Master queued w/err=0: serial=55068 error=0 05:50:26 Received message from Master: op=Filter serial=55069 05:50:26 Color wheel filter change from 0 to 0 05:50:26 FLIGetFilterPos err=0 currentPosition=0 05:50:26 FLIGetStepsRemaining err=0 RemainingSteps=0 05:50:26 Filter is already there-color wheel unchanged 05:50:26 Received message from Master: op=Shutter serial=55070 05:50:26 Shutter LASER close 05:50:26 Received message from Camera: op=State serial=55072 05:50:26 GetSingleValue result=40 Value=cccccccc 05:50:26 SkyScan query 05:50:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:50:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:27 Parameters OK 05:50:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:27 Set A/D data flow result=40 05:50:27 Set A/D channel type result=40 05:50:27 Set A/D encoding result=40 05:50:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:27 Set channel filter=0.000000e+000 result=40 05:50:27 Config A/D Result=40 05:50:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:27 Get A/D filter: -9.255963e+061 result=40 05:50:27 Get A/D value=-858993460 result=40 05:50:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:27 Parameters OK 05:50:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:27 Set A/D data flow result=40 05:50:27 Set A/D channel type result=40 05:50:27 Set A/D encoding result=40 05:50:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:27 Set channel filter=0.000000e+000 result=40 05:50:27 Config A/D Result=40 05:50:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:27 Get A/D filter: -9.255963e+061 result=40 05:50:27 Get A/D value=-858993460 result=40 05:50:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:27 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:50:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:50:27 Aux= 05:50:27 Message to Camera, serial 55072 queued 05:51:03 Received message from Master: op=PointingHead serial=55085 05:51:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:51:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:51:04 Point started: ret=0 05:51:04 point_skyscan result=0 05:51:05 Check angles 05:51:05 SkyScan query 05:51:05 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.105<-23407 Statuses=0009 0009 05:51:05 Msec=0 True Az=113.01 Ze=-171.105 Az status=0009 Ze status=0009 05:51:05 Check angles 05:51:05 SkyScan query 05:51:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:51:06 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:51:06 Message to Master queued w/err=0: serial=55085 error=0 05:51:11 Received message from Master: op=Filter serial=55086 05:51:11 Color wheel filter change from 0 to 0 05:51:11 FLIGetFilterPos err=0 currentPosition=0 05:51:11 FLIGetStepsRemaining err=0 RemainingSteps=0 05:51:11 Filter is already there-color wheel unchanged 05:51:11 Received message from Master: op=Shutter serial=55087 05:51:11 Shutter LASER open 05:51:11 Received message from Camera: op=State serial=55089 05:51:11 GetSingleValue result=40 Value=cccccccc 05:51:11 SkyScan query 05:51:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:51:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:12 Parameters OK 05:51:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:12 Set A/D data flow result=40 05:51:12 Set A/D channel type result=40 05:51:12 Set A/D encoding result=40 05:51:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:12 Set channel filter=0.000000e+000 result=40 05:51:12 Config A/D Result=40 05:51:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:12 Get A/D filter: -9.255963e+061 result=40 05:51:12 Get A/D value=-858993460 result=40 05:51:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:12 Parameters OK 05:51:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:12 Set A/D data flow result=40 05:51:12 Set A/D channel type result=40 05:51:12 Set A/D encoding result=40 05:51:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:12 Set channel filter=0.000000e+000 result=40 05:51:12 Config A/D Result=40 05:51:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:12 Get A/D filter: -9.255963e+061 result=40 05:51:12 Get A/D value=-858993460 result=40 05:51:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:51:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:51:12 Aux= 05:51:12 Message to Camera, serial 55089 queued 05:51:19 Received message from Master: op=Shutter serial=55098 05:51:19 Shutter LASER close 05:51:20 Received message from Master: op=PointingHead serial=55102 05:51:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:51:20 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:51:20 Point started: ret=0 05:51:20 point_skyscan result=0 05:51:21 Check angles 05:51:21 SkyScan query 05:51:22 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.31<-21554 Statuses=0009 0009 05:51:22 Msec=0 True Az=135.96 Ze=-143.31 Az status=0009 Ze status=0009 05:51:22 Check angles 05:51:22 SkyScan query 05:51:22 SkyScan query done: ret=0 az=153.375<-10225 ze=-122.37<-20158 Statuses=0009 0009 05:51:22 Msec=750 True Az=153.375 Ze=-122.37 Az status=0009 Ze status=0009 05:51:22 Check angles 05:51:22 SkyScan query 05:51:23 SkyScan query done: ret=0 az=170.85<-11390 ze=-101.46<-18764 Statuses=0009 0009 05:51:23 Msec=1500 True Az=170.85 Ze=-101.46 Az status=0009 Ze status=0009 05:51:23 Check angles 05:51:23 SkyScan query 05:51:24 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.445<-17363 Statuses=0008 0009 05:51:24 Msec=2250 True Az=176.025 Ze=-80.445 Az status=0008 Ze status=0009 05:51:24 Check angles 05:51:24 SkyScan query 05:51:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.49<-15966 Statuses=0008 0009 05:51:25 Msec=3000 True Az=175.995 Ze=-59.49 Az status=0008 Ze status=0009 05:51:25 Check angles 05:51:25 SkyScan query 05:51:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:51:25 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:51:25 Message to Master queued w/err=0: serial=55102 error=0 05:51:30 Received message from Master: op=Filter serial=55103 05:51:30 Color wheel filter change from 0 to 0 05:51:30 FLIGetFilterPos err=0 currentPosition=0 05:51:30 FLIGetStepsRemaining err=0 RemainingSteps=0 05:51:30 Filter is already there-color wheel unchanged 05:51:30 Received message from Master: op=Shutter serial=55104 05:51:30 Shutter LASER close 05:51:31 Received message from Camera: op=State serial=55106 05:51:31 GetSingleValue result=40 Value=cccccccc 05:51:31 SkyScan query 05:51:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:51:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:31 Parameters OK 05:51:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:31 Set A/D data flow result=40 05:51:31 Set A/D channel type result=40 05:51:31 Set A/D encoding result=40 05:51:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:31 Set channel filter=0.000000e+000 result=40 05:51:31 Config A/D Result=40 05:51:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:31 Get A/D filter: -9.255963e+061 result=40 05:51:31 Get A/D value=-858993460 result=40 05:51:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:31 Parameters OK 05:51:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:31 Set A/D data flow result=40 05:51:31 Set A/D channel type result=40 05:51:31 Set A/D encoding result=40 05:51:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:31 Set channel filter=0.000000e+000 result=40 05:51:31 Config A/D Result=40 05:51:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:31 Get A/D filter: -9.255963e+061 result=40 05:51:31 Get A/D value=-858993460 result=40 05:51:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:51:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:51:31 Aux= 05:51:31 Message to Camera, serial 55106 queued 05:52:08 Received message from Master: op=PointingHead serial=55119 05:52:08 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:52:08 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:52:08 Point started: ret=0 05:52:08 point_skyscan result=0 05:52:09 Check angles 05:52:09 SkyScan query 05:52:10 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.765<-13451 Statuses=0009 0009 05:52:10 Msec=0 True Az=152.985 Ze=-21.765 Az status=0009 Ze status=0009 05:52:10 Check angles 05:52:10 SkyScan query 05:52:10 SkyScan query done: ret=0 az=135.195<-9013 ze=-0.33<-12022 Statuses=0009 0009 05:52:10 Msec=750 True Az=135.195 Ze=-0.33 Az status=0009 Ze status=0009 05:52:11 Check angles 05:52:11 SkyScan query 05:52:11 SkyScan query done: ret=0 az=117.225<-7815 ze=21.06<-10596 Statuses=0009 0009 05:52:11 Msec=1500 True Az=117.225 Ze=21.06 Az status=0009 Ze status=0009 05:52:11 Check angles 05:52:11 SkyScan query 05:52:12 SkyScan query done: ret=0 az=99.915<-6661 ze=42<-9200 Statuses=0009 0009 05:52:12 Msec=2250 True Az=99.915 Ze=42 Az status=0009 Ze status=0009 05:52:12 Check angles 05:52:12 SkyScan query 05:52:13 SkyScan query done: ret=0 az=86.04<-5736 ze=51.555<-8563 Statuses=0009 0008 05:52:13 Msec=3000 True Az=86.04 Ze=51.555 Az status=0009 Ze status=0008 05:52:13 Check angles 05:52:13 SkyScan query 05:52:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:52:13 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:52:13 Message to Master queued w/err=0: serial=55119 error=0 05:52:18 Received message from Master: op=Filter serial=55120 05:52:18 Color wheel filter change from 0 to 0 05:52:18 FLIGetFilterPos err=0 currentPosition=0 05:52:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:52:18 Filter is already there-color wheel unchanged 05:52:19 Received message from Master: op=Shutter serial=55121 05:52:19 Shutter LASER close 05:52:19 Received message from Camera: op=State serial=55123 05:52:19 GetSingleValue result=40 Value=cccccccc 05:52:19 SkyScan query 05:52:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:52:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:19 Parameters OK 05:52:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:19 Set A/D data flow result=40 05:52:19 Set A/D channel type result=40 05:52:19 Set A/D encoding result=40 05:52:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:19 Set channel filter=0.000000e+000 result=40 05:52:19 Config A/D Result=40 05:52:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:19 Get A/D filter: -9.255963e+061 result=40 05:52:19 Get A/D value=-858993460 result=40 05:52:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:19 Parameters OK 05:52:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:19 Set A/D data flow result=40 05:52:19 Set A/D channel type result=40 05:52:19 Set A/D encoding result=40 05:52:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:19 Set channel filter=0.000000e+000 result=40 05:52:19 Config A/D Result=40 05:52:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:19 Get A/D filter: -9.255963e+061 result=40 05:52:19 Get A/D value=-858993460 result=40 05:52:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:52:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:52:19 Aux= 05:52:19 Message to Camera, serial 55123 queued 05:52:56 Received message from Master: op=PointingHead serial=55136 05:52:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:52:56 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:52:56 Point started: ret=0 05:52:56 point_skyscan result=0 05:52:57 Check angles 05:52:57 SkyScan query 05:52:58 SkyScan query done: ret=0 az=108.765<-7251 ze=38.49<-9434 Statuses=0009 0008 05:52:58 Msec=0 True Az=108.765 Ze=38.49 Az status=0009 Ze status=0008 05:52:58 Check angles 05:52:58 SkyScan query 05:52:59 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 05:52:59 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 05:52:59 Check angles 05:52:59 SkyScan query 05:52:59 SkyScan query done: ret=0 az=144.51<-9634 ze=38.505<-9433 Statuses=0009 0008 05:52:59 Msec=1500 True Az=144.51 Ze=38.505 Az status=0009 Ze status=0008 05:53:00 Check angles 05:53:00 SkyScan query 05:53:00 SkyScan query done: ret=0 az=161.895<-10793 ze=38.505<-9433 Statuses=0009 0008 05:53:00 Msec=2250 True Az=161.895 Ze=38.505 Az status=0009 Ze status=0008 05:53:00 Check angles 05:53:00 SkyScan query 05:53:01 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:53:01 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:53:01 Check angles 05:53:01 SkyScan query 05:53:02 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:53:02 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:53:02 Message to Master queued w/err=0: serial=55136 error=0 05:53:07 Received message from Master: op=Filter serial=55137 05:53:07 Color wheel filter change from 0 to 0 05:53:07 FLIGetFilterPos err=0 currentPosition=0 05:53:07 FLIGetStepsRemaining err=0 RemainingSteps=0 05:53:07 Filter is already there-color wheel unchanged 05:53:07 Received message from Master: op=Shutter serial=55138 05:53:07 Shutter LASER close 05:53:07 Received message from Camera: op=State serial=55140 05:53:07 GetSingleValue result=40 Value=cccccccc 05:53:07 SkyScan query 05:53:07 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:53:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:07 Parameters OK 05:53:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:07 Set A/D data flow result=40 05:53:07 Set A/D channel type result=40 05:53:07 Set A/D encoding result=40 05:53:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:07 Set channel filter=0.000000e+000 result=40 05:53:07 Config A/D Result=40 05:53:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:07 Get A/D filter: -9.255963e+061 result=40 05:53:07 Get A/D value=-858993460 result=40 05:53:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:07 Parameters OK 05:53:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:07 Set A/D data flow result=40 05:53:07 Set A/D channel type result=40 05:53:07 Set A/D encoding result=40 05:53:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:07 Set channel filter=0.000000e+000 result=40 05:53:07 Config A/D Result=40 05:53:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:07 Get A/D filter: -9.255963e+061 result=40 05:53:07 Get A/D value=-858993460 result=40 05:53:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:53:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:53:07 Aux= 05:53:07 Message to Camera, serial 55140 queued 05:53:44 Received message from Master: op=PointingHead serial=55153 05:53:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:53:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:53:45 Point started: ret=0 05:53:45 point_skyscan result=0 05:53:45 Check angles 05:53:45 SkyScan query 05:53:46 SkyScan query done: ret=0 az=152.85<-10190 ze=8.655<-11423 Statuses=0009 0009 05:53:46 Msec=0 True Az=152.85 Ze=8.655 Az status=0009 Ze status=0009 05:53:46 Check angles 05:53:46 SkyScan query 05:53:47 SkyScan query done: ret=0 az=135.45<-9030 ze=-12.3<-12820 Statuses=0009 0009 05:53:47 Msec=750 True Az=135.45 Ze=-12.3 Az status=0009 Ze status=0009 05:53:47 Check angles 05:53:47 SkyScan query 05:53:47 SkyScan query done: ret=0 az=117.75<-7850 ze=-33.225<-14215 Statuses=0009 0009 05:53:47 Msec=1500 True Az=117.75 Ze=-33.225 Az status=0009 Ze status=0009 05:53:48 Check angles 05:53:48 SkyScan query 05:53:48 SkyScan query done: ret=0 az=100.395<-6693 ze=-51.54<-15436 Statuses=0009 0009 05:53:48 Msec=2250 True Az=100.395 Ze=-51.54 Az status=0009 Ze status=0009 05:53:48 Check angles 05:53:48 SkyScan query 05:53:49 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 05:53:49 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 05:53:49 Check angles 05:53:49 SkyScan query 05:53:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:53:50 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:53:50 Message to Master queued w/err=0: serial=55153 error=0 05:53:55 Received message from Master: op=Filter serial=55154 05:53:55 Color wheel filter change from 0 to 0 05:53:55 FLIGetFilterPos err=0 currentPosition=0 05:53:55 FLIGetStepsRemaining err=0 RemainingSteps=0 05:53:55 Filter is already there-color wheel unchanged 05:53:55 Received message from Master: op=Shutter serial=55155 05:53:55 Shutter LASER close 05:53:55 Received message from Camera: op=State serial=55157 05:53:55 GetSingleValue result=40 Value=cccccccc 05:53:55 SkyScan query 05:53:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:53:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:55 Parameters OK 05:53:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:55 Set A/D data flow result=40 05:53:55 Set A/D channel type result=40 05:53:55 Set A/D encoding result=40 05:53:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:55 Set channel filter=0.000000e+000 result=40 05:53:55 Config A/D Result=40 05:53:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:55 Get A/D filter: -9.255963e+061 result=40 05:53:55 Get A/D value=-858993460 result=40 05:53:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:55 Parameters OK 05:53:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:55 Set A/D data flow result=40 05:53:55 Set A/D channel type result=40 05:53:55 Set A/D encoding result=40 05:53:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:55 Set channel filter=0.000000e+000 result=40 05:53:55 Config A/D Result=40 05:53:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:55 Get A/D filter: -9.255963e+061 result=40 05:53:55 Get A/D value=-858993460 result=40 05:53:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:53:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:53:55 Aux= 05:53:55 Message to Camera, serial 55157 queued 05:54:32 Received message from Master: op=PointingHead serial=55170 05:54:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:54:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:54:33 Point started: ret=0 05:54:33 point_skyscan result=0 05:54:33 Check angles 05:54:33 SkyScan query 05:54:34 SkyScan query done: ret=0 az=108.84<-7256 ze=-81.03<-17402 Statuses=0009 0009 05:54:34 Msec=0 True Az=108.84 Ze=-81.03 Az status=0009 Ze status=0009 05:54:34 Check angles 05:54:34 SkyScan query 05:54:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-102<-18800 Statuses=0008 0009 05:54:35 Msec=750 True Az=112.995 Ze=-102 Az status=0008 Ze status=0009 05:54:35 Check angles 05:54:35 SkyScan query 05:54:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.955<-20197 Statuses=0008 0009 05:54:35 Msec=1500 True Az=112.995 Ze=-122.955 Az status=0008 Ze status=0009 05:54:36 Check angles 05:54:36 SkyScan query 05:54:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.91<-21594 Statuses=0008 0009 05:54:36 Msec=2250 True Az=112.995 Ze=-143.91 Az status=0008 Ze status=0009 05:54:36 Check angles 05:54:36 SkyScan query 05:54:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.88<-22992 Statuses=0008 0009 05:54:37 Msec=3000 True Az=112.995 Ze=-164.88 Az status=0008 Ze status=0009 05:54:37 Check angles 05:54:37 SkyScan query 05:54:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 05:54:38 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 05:54:38 Message to Master queued w/err=0: serial=55170 error=0 05:54:43 Received message from Master: op=Filter serial=55171 05:54:43 Color wheel filter change from 0 to 0 05:54:43 FLIGetFilterPos err=0 currentPosition=0 05:54:43 FLIGetStepsRemaining err=0 RemainingSteps=0 05:54:43 Filter is already there-color wheel unchanged 05:54:43 Received message from Master: op=Shutter serial=55172 05:54:43 Shutter LASER open 05:54:43 Received message from Camera: op=State serial=55174 05:54:43 GetSingleValue result=40 Value=cccccccc 05:54:43 SkyScan query 05:54:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:54:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:44 Parameters OK 05:54:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:44 Set A/D data flow result=40 05:54:44 Set A/D channel type result=40 05:54:44 Set A/D encoding result=40 05:54:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:44 Set channel filter=0.000000e+000 result=40 05:54:44 Config A/D Result=40 05:54:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:44 Get A/D filter: -9.255963e+061 result=40 05:54:44 Get A/D value=-858993460 result=40 05:54:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:44 Parameters OK 05:54:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:44 Set A/D data flow result=40 05:54:44 Set A/D channel type result=40 05:54:44 Set A/D encoding result=40 05:54:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:44 Set channel filter=0.000000e+000 result=40 05:54:44 Config A/D Result=40 05:54:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:44 Get A/D filter: -9.255963e+061 result=40 05:54:44 Get A/D value=-858993460 result=40 05:54:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:54:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:54:44 Aux= 05:54:44 Message to Camera, serial 55174 queued 05:54:52 Received message from Master: op=Shutter serial=55184 05:54:52 Shutter LASER close 05:54:52 Received message from Master: op=PointingHead serial=55188 05:54:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:54:52 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:54:53 Point started: ret=0 05:54:53 point_skyscan result=0 05:54:54 Check angles 05:54:54 SkyScan query 05:54:54 SkyScan query done: ret=0 az=89.895<-5993 ze=157.335<-1511 Statuses=0009 0009 05:54:54 Msec=0 True Az=89.895 Ze=157.335 Az status=0009 Ze status=0009 05:54:54 Check angles 05:54:54 SkyScan query 05:54:55 SkyScan query done: ret=0 az=72.03<-4802 ze=135.93<-2938 Statuses=0009 0009 05:54:55 Msec=750 True Az=72.03 Ze=135.93 Az status=0009 Ze status=0009 05:54:55 Check angles 05:54:55 SkyScan query 05:54:56 SkyScan query done: ret=0 az=54.855<-3657 ze=114.96<-4336 Statuses=0009 0009 05:54:56 Msec=1500 True Az=54.855 Ze=114.96 Az status=0009 Ze status=0009 05:54:56 Check angles 05:54:56 SkyScan query 05:54:56 SkyScan query done: ret=0 az=40.89<-2726 ze=93.99<-5734 Statuses=0009 0009 05:54:56 Msec=2250 True Az=40.89 Ze=93.99 Az status=0009 Ze status=0009 05:54:57 Check angles 05:54:57 SkyScan query 05:54:57 SkyScan query done: ret=0 az=40.995<-2733 ze=73.035<-7131 Statuses=0008 0009 05:54:57 Msec=3000 True Az=40.995 Ze=73.035 Az status=0008 Ze status=0009 05:54:57 Check angles 05:54:57 SkyScan query 05:54:58 SkyScan query done: ret=0 az=40.995<-2733 ze=52.605<-8493 Statuses=0008 0009 05:54:58 Msec=3750 True Az=40.995 Ze=52.605 Az status=0008 Ze status=0009 05:54:58 Check angles 05:54:58 SkyScan query 05:54:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:54:59 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:54:59 Message to Master queued w/err=0: serial=55188 error=0 05:55:04 Received message from Master: op=Filter serial=55189 05:55:04 Color wheel filter change from 0 to 0 05:55:04 FLIGetFilterPos err=0 currentPosition=0 05:55:04 FLIGetStepsRemaining err=0 RemainingSteps=0 05:55:04 Filter is already there-color wheel unchanged 05:55:04 Received message from Master: op=Shutter serial=55190 05:55:04 Shutter LASER close 05:55:04 Received message from Camera: op=State serial=55192 05:55:04 GetSingleValue result=40 Value=cccccccc 05:55:04 SkyScan query 05:55:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:55:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:05 Parameters OK 05:55:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:05 Set A/D data flow result=40 05:55:05 Set A/D channel type result=40 05:55:05 Set A/D encoding result=40 05:55:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:05 Set channel filter=0.000000e+000 result=40 05:55:05 Config A/D Result=40 05:55:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:05 Get A/D filter: -9.255963e+061 result=40 05:55:05 Get A/D value=-858993460 result=40 05:55:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:05 Parameters OK 05:55:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:05 Set A/D data flow result=40 05:55:05 Set A/D channel type result=40 05:55:05 Set A/D encoding result=40 05:55:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:05 Set channel filter=0.000000e+000 result=40 05:55:05 Config A/D Result=40 05:55:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:05 Get A/D filter: -9.255963e+061 result=40 05:55:05 Get A/D value=-858993460 result=40 05:55:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:55:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:55:05 Aux= 05:55:05 Message to Camera, serial 55192 queued 05:55:40 Received message from Master: op=PointingHead serial=55204 05:55:40 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:55:40 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:55:41 Point started: ret=0 05:55:41 point_skyscan result=0 05:55:42 Check angles 05:55:42 SkyScan query 05:55:42 SkyScan query done: ret=0 az=64.23<-4282 ze=66.555<-7563 Statuses=0009 0008 05:55:42 Msec=0 True Az=64.23 Ze=66.555 Az status=0009 Ze status=0008 05:55:42 Check angles 05:55:42 SkyScan query 05:55:43 SkyScan query done: ret=0 az=81.54<-5436 ze=66.51<-7566 Statuses=0009 0008 05:55:43 Msec=750 True Az=81.54 Ze=66.51 Az status=0009 Ze status=0008 05:55:43 Check angles 05:55:43 SkyScan query 05:55:44 SkyScan query done: ret=0 az=99.195<-6613 ze=66.495<-7567 Statuses=0009 0008 05:55:44 Msec=1500 True Az=99.195 Ze=66.495 Az status=0009 Ze status=0008 [UTC 2018-12-11 05:55:44] 05:55:44 Check angles 05:55:44 SkyScan query 05:55:44 SkyScan query done: ret=0 az=118.065<-7871 ze=66.495<-7567 Statuses=0009 0008 05:55:44 Msec=2250 True Az=118.065 Ze=66.495 Az status=0009 Ze status=0008 05:55:45 Check angles 05:55:45 SkyScan query 05:55:45 SkyScan query done: ret=0 az=134.25<-8950 ze=66.495<-7567 Statuses=0009 0008 05:55:45 Msec=3000 True Az=134.25 Ze=66.495 Az status=0009 Ze status=0008 05:55:45 Check angles 05:55:45 SkyScan query 05:55:46 SkyScan query done: ret=0 az=151.62<-10108 ze=66.495<-7567 Statuses=0009 0008 05:55:46 Msec=3750 True Az=151.62 Ze=66.495 Az status=0009 Ze status=0008 05:55:46 Check angles 05:55:46 SkyScan query 05:55:47 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 05:55:47 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 05:55:47 Message to Master queued w/err=0: serial=55204 error=0 05:55:52 Received message from Master: op=Filter serial=55205 05:55:52 Color wheel filter change from 0 to 0 05:55:52 FLIGetFilterPos err=0 currentPosition=0 05:55:52 FLIGetStepsRemaining err=0 RemainingSteps=0 05:55:52 Filter is already there-color wheel unchanged 05:55:52 Received message from Master: op=Shutter serial=55206 05:55:52 Shutter LASER close 05:55:52 Received message from Camera: op=State serial=55208 05:55:52 GetSingleValue result=40 Value=cccccccc 05:55:52 SkyScan query 05:55:52 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:55:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:52 Parameters OK 05:55:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:52 Set A/D data flow result=40 05:55:52 Set A/D channel type result=40 05:55:52 Set A/D encoding result=40 05:55:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:52 Set channel filter=0.000000e+000 result=40 05:55:52 Config A/D Result=40 05:55:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:52 Get A/D filter: -9.255963e+061 result=40 05:55:52 Get A/D value=-858993460 result=40 05:55:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:52 Parameters OK 05:55:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:52 Set A/D data flow result=40 05:55:52 Set A/D channel type result=40 05:55:52 Set A/D encoding result=40 05:55:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:52 Set channel filter=0.000000e+000 result=40 05:55:52 Config A/D Result=40 05:55:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:52 Get A/D filter: -9.255963e+061 result=40 05:55:52 Get A/D value=-858993460 result=40 05:55:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:52 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:55:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:55:52 Aux= 05:55:52 Message to Camera, serial 55208 queued [UTC 2018-12-11 05:55:54] 05:56:29 Received message from Master: op=PointingHead serial=55221 05:56:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:56:29 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:56:30 Point started: ret=0 05:56:30 point_skyscan result=0 05:56:30 Check angles 05:56:30 SkyScan query 05:56:31 SkyScan query done: ret=0 az=134.565<-8971 ze=36.465<-9569 Statuses=0009 0009 05:56:31 Msec=0 True Az=134.565 Ze=36.465 Az status=0009 Ze status=0009 05:56:31 Check angles 05:56:31 SkyScan query 05:56:32 SkyScan query done: ret=0 az=117.18<-7812 ze=15.54<-10964 Statuses=0009 0009 05:56:32 Msec=750 True Az=117.18 Ze=15.54 Az status=0009 Ze status=0009 05:56:32 Check angles 05:56:32 SkyScan query 05:56:32 SkyScan query done: ret=0 az=99.42<-6628 ze=-5.88<-12392 Statuses=0009 0009 05:56:32 Msec=1500 True Az=99.42 Ze=-5.88 Az status=0009 Ze status=0009 05:56:33 Check angles 05:56:33 SkyScan query 05:56:33 SkyScan query done: ret=0 az=81.96<-5464 ze=-26.82<-13788 Statuses=0009 0009 05:56:33 Msec=2250 True Az=81.96 Ze=-26.82 Az status=0009 Ze status=0009 05:56:33 Check angles 05:56:33 SkyScan query 05:56:34 SkyScan query done: ret=0 az=64.485<-4299 ze=-38.565<-14571 Statuses=0009 0008 05:56:34 Msec=3000 True Az=64.485 Ze=-38.565 Az status=0009 Ze status=0008 05:56:34 Check angles 05:56:34 SkyScan query 05:56:35 SkyScan query done: ret=0 az=47.055<-3137 ze=-38.535<-14569 Statuses=0009 0008 05:56:35 Msec=3750 True Az=47.055 Ze=-38.535 Az status=0009 Ze status=0008 05:56:35 Check angles 05:56:35 SkyScan query 05:56:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:56:35 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:56:35 Message to Master queued w/err=0: serial=55221 error=0 05:56:40 Received message from Master: op=Filter serial=55222 05:56:40 Color wheel filter change from 0 to 0 05:56:40 FLIGetFilterPos err=0 currentPosition=0 05:56:40 FLIGetStepsRemaining err=0 RemainingSteps=0 05:56:40 Filter is already there-color wheel unchanged 05:56:41 Received message from Master: op=Shutter serial=55223 05:56:41 Shutter LASER close 05:56:41 Received message from Camera: op=State serial=55225 05:56:41 GetSingleValue result=40 Value=cccccccc 05:56:41 SkyScan query 05:56:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:56:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:41 Parameters OK 05:56:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:41 Set A/D data flow result=40 05:56:41 Set A/D channel type result=40 05:56:41 Set A/D encoding result=40 05:56:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:41 Set channel filter=0.000000e+000 result=40 05:56:41 Config A/D Result=40 05:56:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:41 Get A/D filter: -9.255963e+061 result=40 05:56:41 Get A/D value=-858993460 result=40 05:56:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:41 Parameters OK 05:56:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:41 Set A/D data flow result=40 05:56:41 Set A/D channel type result=40 05:56:41 Set A/D encoding result=40 05:56:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:41 Set channel filter=0.000000e+000 result=40 05:56:41 Config A/D Result=40 05:56:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:41 Get A/D filter: -9.255963e+061 result=40 05:56:41 Get A/D value=-858993460 result=40 05:56:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:56:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:56:41 Aux= 05:56:41 Message to Camera, serial 55225 queued 05:57:18 Received message from Master: op=PointingHead serial=55238 05:57:18 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:57:18 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:57:19 Point started: ret=0 05:57:19 point_skyscan result=0 05:57:19 Check angles 05:57:19 SkyScan query 05:57:20 SkyScan query done: ret=0 az=64.035<-4269 ze=-68.115<-16541 Statuses=0009 0009 05:57:20 Msec=0 True Az=64.035 Ze=-68.115 Az status=0009 Ze status=0009 05:57:20 Check angles 05:57:20 SkyScan query 05:57:21 SkyScan query done: ret=0 az=81.66<-5444 ze=-89.58<-17972 Statuses=0009 0009 05:57:21 Msec=750 True Az=81.66 Ze=-89.58 Az status=0009 Ze status=0009 05:57:21 Check angles 05:57:21 SkyScan query 05:57:21 SkyScan query done: ret=0 az=99.465<-6631 ze=-110.535<-19369 Statuses=0009 0009 05:57:21 Msec=1500 True Az=99.465 Ze=-110.535 Az status=0009 Ze status=0009 05:57:22 Check angles 05:57:22 SkyScan query 05:57:22 SkyScan query done: ret=0 az=116.955<-7797 ze=-131.475<-20765 Statuses=0009 0009 05:57:22 Msec=2250 True Az=116.955 Ze=-131.475 Az status=0009 Ze status=0009 05:57:22 Check angles 05:57:22 SkyScan query 05:57:23 SkyScan query done: ret=0 az=131.16<-8744 ze=-141.54<-21436 Statuses=0009 0008 05:57:23 Msec=3000 True Az=131.16 Ze=-141.54 Az status=0009 Ze status=0008 05:57:23 Check angles 05:57:23 SkyScan query 05:57:24 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:57:24 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:57:24 Message to Master queued w/err=0: serial=55238 error=0 05:57:29 Received message from Master: op=Filter serial=55239 05:57:29 Color wheel filter change from 0 to 0 05:57:29 FLIGetFilterPos err=0 currentPosition=0 05:57:29 FLIGetStepsRemaining err=0 RemainingSteps=0 05:57:29 Filter is already there-color wheel unchanged 05:57:29 Received message from Master: op=Shutter serial=55240 05:57:29 Shutter LASER close 05:57:29 Received message from Camera: op=State serial=55242 05:57:29 GetSingleValue result=40 Value=cccccccc 05:57:29 SkyScan query 05:57:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:57:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:29 Parameters OK 05:57:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:29 Set A/D data flow result=40 05:57:29 Set A/D channel type result=40 05:57:29 Set A/D encoding result=40 05:57:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:29 Set channel filter=0.000000e+000 result=40 05:57:29 Config A/D Result=40 05:57:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:29 Get A/D filter: -9.255963e+061 result=40 05:57:29 Get A/D value=-858993460 result=40 05:57:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:29 Parameters OK 05:57:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:29 Set A/D data flow result=40 05:57:29 Set A/D channel type result=40 05:57:29 Set A/D encoding result=40 05:57:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:29 Set channel filter=0.000000e+000 result=40 05:57:29 Config A/D Result=40 05:57:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:29 Get A/D filter: -9.255963e+061 result=40 05:57:29 Get A/D value=-858993460 result=40 05:57:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:29 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:57:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:57:29 Aux= 05:57:29 Message to Camera, serial 55242 queued 05:58:06 Received message from Master: op=PointingHead serial=55255 05:58:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:58:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:58:07 Point started: ret=0 05:58:07 point_skyscan result=0 05:58:07 Check angles 05:58:07 SkyScan query 05:58:08 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.895<-23393 Statuses=0009 0009 05:58:08 Msec=0 True Az=113.01 Ze=-170.895 Az status=0009 Ze status=0009 05:58:08 Check angles 05:58:08 SkyScan query 05:58:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:58:09 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:58:09 Message to Master queued w/err=0: serial=55255 error=0 05:58:14 Received message from Master: op=Filter serial=55256 05:58:14 Color wheel filter change from 0 to 0 05:58:14 FLIGetFilterPos err=0 currentPosition=0 05:58:14 FLIGetStepsRemaining err=0 RemainingSteps=0 05:58:14 Filter is already there-color wheel unchanged 05:58:14 Received message from Master: op=Shutter serial=55257 05:58:14 Shutter LASER open 05:58:14 Received message from Camera: op=State serial=55259 05:58:14 GetSingleValue result=40 Value=cccccccc 05:58:14 SkyScan query 05:58:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:58:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:15 Parameters OK 05:58:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:15 Set A/D data flow result=40 05:58:15 Set A/D channel type result=40 05:58:15 Set A/D encoding result=40 05:58:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:15 Set channel filter=0.000000e+000 result=40 05:58:15 Config A/D Result=40 05:58:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:15 Get A/D filter: -9.255963e+061 result=40 05:58:15 Get A/D value=-858993460 result=40 05:58:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:15 Parameters OK 05:58:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:15 Set A/D data flow result=40 05:58:15 Set A/D channel type result=40 05:58:15 Set A/D encoding result=40 05:58:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:15 Set channel filter=0.000000e+000 result=40 05:58:15 Config A/D Result=40 05:58:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:15 Get A/D filter: -9.255963e+061 result=40 05:58:15 Get A/D value=-858993460 result=40 05:58:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:58:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:58:15 Aux= 05:58:15 Message to Camera, serial 55259 queued 05:58:23 Received message from Master: op=Shutter serial=55269 05:58:23 Shutter LASER close 05:58:24 Received message from Master: op=PointingHead serial=55273 05:58:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:58:24 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:58:24 Point started: ret=0 05:58:24 point_skyscan result=0 05:58:25 Check angles 05:58:25 SkyScan query 05:58:25 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.46<-21564 Statuses=0009 0009 05:58:25 Msec=0 True Az=135.765 Ze=-143.46 Az status=0009 Ze status=0009 05:58:25 Check angles 05:58:25 SkyScan query 05:58:26 SkyScan query done: ret=0 az=153.645<-10243 ze=-122.055<-20137 Statuses=0009 0009 05:58:26 Msec=750 True Az=153.645 Ze=-122.055 Az status=0009 Ze status=0009 05:58:26 Check angles 05:58:26 SkyScan query 05:58:27 SkyScan query done: ret=0 az=171.21<-11414 ze=-101.16<-18744 Statuses=0009 0009 05:58:27 Msec=1500 True Az=171.21 Ze=-101.16 Az status=0009 Ze status=0009 05:58:27 Check angles 05:58:27 SkyScan query 05:58:28 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.19<-17346 Statuses=0008 0009 05:58:28 Msec=2250 True Az=176.025 Ze=-80.19 Az status=0008 Ze status=0009 05:58:28 Check angles 05:58:28 SkyScan query 05:58:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.19<-15946 Statuses=0008 0009 05:58:28 Msec=3000 True Az=175.995 Ze=-59.19 Az status=0008 Ze status=0009 05:58:28 Check angles 05:58:28 SkyScan query 05:58:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:58:29 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:58:29 Message to Master queued w/err=0: serial=55273 error=0 05:58:34 Received message from Master: op=Filter serial=55274 05:58:34 Color wheel filter change from 0 to 0 05:58:34 FLIGetFilterPos err=0 currentPosition=0 05:58:34 FLIGetStepsRemaining err=0 RemainingSteps=0 05:58:34 Filter is already there-color wheel unchanged 05:58:34 Received message from Master: op=Shutter serial=55275 05:58:34 Shutter LASER close 05:58:34 Received message from Camera: op=State serial=55277 05:58:34 GetSingleValue result=40 Value=cccccccc 05:58:34 SkyScan query 05:58:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:58:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:35 Parameters OK 05:58:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:35 Set A/D data flow result=40 05:58:35 Set A/D channel type result=40 05:58:35 Set A/D encoding result=40 05:58:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:35 Set channel filter=0.000000e+000 result=40 05:58:35 Config A/D Result=40 05:58:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:35 Get A/D filter: -9.255963e+061 result=40 05:58:35 Get A/D value=-858993460 result=40 05:58:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:35 Parameters OK 05:58:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:35 Set A/D data flow result=40 05:58:35 Set A/D channel type result=40 05:58:35 Set A/D encoding result=40 05:58:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:35 Set channel filter=0.000000e+000 result=40 05:58:35 Config A/D Result=40 05:58:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:35 Get A/D filter: -9.255963e+061 result=40 05:58:35 Get A/D value=-858993460 result=40 05:58:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:58:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:58:35 Aux= 05:58:35 Message to Camera, serial 55277 queued 05:59:12 Received message from Master: op=PointingHead serial=55290 05:59:12 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:59:12 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:59:12 Point started: ret=0 05:59:12 point_skyscan result=0 05:59:13 Check angles 05:59:13 SkyScan query 05:59:13 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.02<-13468 Statuses=0009 0009 05:59:13 Msec=0 True Az=153.225 Ze=-22.02 Az status=0009 Ze status=0009 05:59:14 Check angles 05:59:14 SkyScan query 05:59:14 SkyScan query done: ret=0 az=135.48<-9032 ze=-0.6<-12040 Statuses=0009 0009 05:59:14 Msec=750 True Az=135.48 Ze=-0.6 Az status=0009 Ze status=0009 05:59:14 Check angles 05:59:14 SkyScan query 05:59:15 SkyScan query done: ret=0 az=117.495<-7833 ze=20.805<-10613 Statuses=0009 0009 05:59:15 Msec=1500 True Az=117.495 Ze=20.805 Az status=0009 Ze status=0009 05:59:15 Check angles 05:59:15 SkyScan query 05:59:16 SkyScan query done: ret=0 az=100.14<-6676 ze=41.73<-9218 Statuses=0009 0009 05:59:16 Msec=2250 True Az=100.14 Ze=41.73 Az status=0009 Ze status=0009 05:59:16 Check angles 05:59:16 SkyScan query 05:59:16 SkyScan query done: ret=0 az=86.055<-5737 ze=51.54<-8564 Statuses=0009 0008 05:59:16 Msec=3000 True Az=86.055 Ze=51.54 Az status=0009 Ze status=0008 05:59:17 Check angles 05:59:17 SkyScan query 05:59:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:59:17 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 05:59:17 Message to Master queued w/err=0: serial=55290 error=0 05:59:22 Received message from Master: op=Filter serial=55291 05:59:22 Color wheel filter change from 0 to 0 05:59:22 FLIGetFilterPos err=0 currentPosition=0 05:59:22 FLIGetStepsRemaining err=0 RemainingSteps=0 05:59:22 Filter is already there-color wheel unchanged 05:59:22 Received message from Master: op=Shutter serial=55292 05:59:22 Shutter LASER close 05:59:22 Received message from Camera: op=State serial=55294 05:59:22 GetSingleValue result=40 Value=cccccccc 05:59:22 SkyScan query 05:59:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 05:59:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:23 Parameters OK 05:59:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:23 Set A/D data flow result=40 05:59:23 Set A/D channel type result=40 05:59:23 Set A/D encoding result=40 05:59:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:23 Set channel filter=0.000000e+000 result=40 05:59:23 Config A/D Result=40 05:59:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:23 Get A/D filter: -9.255963e+061 result=40 05:59:23 Get A/D value=-858993460 result=40 05:59:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:23 Parameters OK 05:59:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:23 Set A/D data flow result=40 05:59:23 Set A/D channel type result=40 05:59:23 Set A/D encoding result=40 05:59:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:23 Set channel filter=0.000000e+000 result=40 05:59:23 Config A/D Result=40 05:59:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:23 Get A/D filter: -9.255963e+061 result=40 05:59:23 Get A/D value=-858993460 result=40 05:59:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:59:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:59:23 Aux= 05:59:23 Message to Camera, serial 55294 queued 06:00:00 Received message from Master: op=PointingHead serial=55307 06:00:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:00:00 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:00:00 Point started: ret=0 06:00:00 point_skyscan result=0 06:00:01 Check angles 06:00:01 SkyScan query 06:00:02 SkyScan query done: ret=0 az=109.245<-7283 ze=38.49<-9434 Statuses=0009 0008 06:00:02 Msec=0 True Az=109.245 Ze=38.49 Az status=0009 Ze status=0008 06:00:02 Check angles 06:00:02 SkyScan query 06:00:02 SkyScan query done: ret=0 az=127.095<-8473 ze=38.505<-9433 Statuses=0009 0008 06:00:02 Msec=750 True Az=127.095 Ze=38.505 Az status=0009 Ze status=0008 06:00:03 Check angles 06:00:03 SkyScan query 06:00:03 SkyScan query done: ret=0 az=144.57<-9638 ze=38.505<-9433 Statuses=0009 0008 06:00:03 Msec=1500 True Az=144.57 Ze=38.505 Az status=0009 Ze status=0008 06:00:03 Check angles 06:00:03 SkyScan query 06:00:04 SkyScan query done: ret=0 az=162.015<-10801 ze=38.505<-9433 Statuses=0009 0008 06:00:04 Msec=2250 True Az=162.015 Ze=38.505 Az status=0009 Ze status=0008 06:00:04 Check angles 06:00:04 SkyScan query 06:00:05 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:00:05 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:00:05 Check angles 06:00:05 SkyScan query 06:00:05 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:00:05 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:00:05 Message to Master queued w/err=0: serial=55307 error=0 06:00:10 Received message from Master: op=Filter serial=55308 06:00:10 Color wheel filter change from 0 to 0 06:00:10 FLIGetFilterPos err=0 currentPosition=0 06:00:10 FLIGetStepsRemaining err=0 RemainingSteps=0 06:00:10 Filter is already there-color wheel unchanged 06:00:11 Received message from Master: op=Shutter serial=55309 06:00:11 Shutter LASER close 06:00:11 Received message from Camera: op=State serial=55311 06:00:11 GetSingleValue result=40 Value=cccccccc 06:00:11 SkyScan query 06:00:11 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:00:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:11 Parameters OK 06:00:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:11 Set A/D data flow result=40 06:00:11 Set A/D channel type result=40 06:00:11 Set A/D encoding result=40 06:00:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:11 Set channel filter=0.000000e+000 result=40 06:00:11 Config A/D Result=40 06:00:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:11 Get A/D filter: -9.255963e+061 result=40 06:00:11 Get A/D value=-858993460 result=40 06:00:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:11 Parameters OK 06:00:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:11 Set A/D data flow result=40 06:00:11 Set A/D channel type result=40 06:00:11 Set A/D encoding result=40 06:00:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:11 Set channel filter=0.000000e+000 result=40 06:00:11 Config A/D Result=40 06:00:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:11 Get A/D filter: -9.255963e+061 result=40 06:00:11 Get A/D value=-858993460 result=40 06:00:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:00:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:00:11 Aux= 06:00:11 Message to Camera, serial 55311 queued 06:00:48 Received message from Master: op=PointingHead serial=55324 06:00:48 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:00:48 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:00:48 Point started: ret=0 06:00:48 point_skyscan result=0 06:00:49 Check angles 06:00:49 SkyScan query 06:00:50 SkyScan query done: ret=0 az=152.775<-10185 ze=8.325<-11445 Statuses=0009 0009 06:00:50 Msec=0 True Az=152.775 Ze=8.325 Az status=0009 Ze status=0009 06:00:50 Check angles 06:00:50 SkyScan query 06:00:50 SkyScan query done: ret=0 az=135.27<-9018 ze=-12.615<-12841 Statuses=0009 0009 06:00:50 Msec=750 True Az=135.27 Ze=-12.615 Az status=0009 Ze status=0009 06:00:51 Check angles 06:00:51 SkyScan query 06:00:51 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.54<-14236 Statuses=0009 0009 06:00:51 Msec=1500 True Az=117.6 Ze=-33.54 Az status=0009 Ze status=0009 06:00:51 Check angles 06:00:51 SkyScan query 06:00:52 SkyScan query done: ret=0 az=100.26<-6684 ze=-51.555<-15437 Statuses=0009 0009 06:00:52 Msec=2250 True Az=100.26 Ze=-51.555 Az status=0009 Ze status=0009 06:00:52 Check angles 06:00:52 SkyScan query 06:00:53 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 06:00:53 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 06:00:53 Check angles 06:00:53 SkyScan query 06:00:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:00:53 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:00:53 Message to Master queued w/err=0: serial=55324 error=0 06:00:58 Received message from Master: op=Filter serial=55325 06:00:58 Color wheel filter change from 0 to 0 06:00:58 FLIGetFilterPos err=0 currentPosition=0 06:00:58 FLIGetStepsRemaining err=0 RemainingSteps=0 06:00:58 Filter is already there-color wheel unchanged 06:00:59 Received message from Master: op=Shutter serial=55326 06:00:59 Shutter LASER close 06:00:59 Received message from Camera: op=State serial=55328 06:00:59 GetSingleValue result=40 Value=cccccccc 06:00:59 SkyScan query 06:00:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:00:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:59 Parameters OK 06:00:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:59 Set A/D data flow result=40 06:00:59 Set A/D channel type result=40 06:00:59 Set A/D encoding result=40 06:00:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:59 Set channel filter=0.000000e+000 result=40 06:00:59 Config A/D Result=40 06:00:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:59 Get A/D filter: -9.255963e+061 result=40 06:00:59 Get A/D value=-858993460 result=40 06:00:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:59 Parameters OK 06:00:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:59 Set A/D data flow result=40 06:00:59 Set A/D channel type result=40 06:00:59 Set A/D encoding result=40 06:00:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:59 Set channel filter=0.000000e+000 result=40 06:00:59 Config A/D Result=40 06:00:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:59 Get A/D filter: -9.255963e+061 result=40 06:00:59 Get A/D value=-858993460 result=40 06:00:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:00:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:00:59 Aux= 06:00:59 Message to Camera, serial 55328 queued 06:01:36 Received message from Master: op=PointingHead serial=55341 06:01:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:01:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:01:36 Point started: ret=0 06:01:36 point_skyscan result=0 06:01:37 Check angles 06:01:37 SkyScan query 06:01:38 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.195<-17413 Statuses=0009 0009 06:01:38 Msec=0 True Az=108.975 Ze=-81.195 Az status=0009 Ze status=0009 06:01:38 Check angles 06:01:38 SkyScan query 06:01:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.165<-18811 Statuses=0008 0009 06:01:39 Msec=750 True Az=112.995 Ze=-102.165 Az status=0008 Ze status=0009 06:01:39 Check angles 06:01:39 SkyScan query 06:01:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.54<-20236 Statuses=0008 0009 06:01:39 Msec=1500 True Az=112.995 Ze=-123.54 Az status=0008 Ze status=0009 06:01:39 Check angles 06:01:39 SkyScan query 06:01:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.525<-21635 Statuses=0008 0009 06:01:40 Msec=2250 True Az=112.995 Ze=-144.525 Az status=0008 Ze status=0009 06:01:40 Check angles 06:01:40 SkyScan query 06:01:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.435<-23029 Statuses=0008 0009 06:01:41 Msec=3000 True Az=112.995 Ze=-165.435 Az status=0008 Ze status=0009 06:01:41 Check angles 06:01:41 SkyScan query 06:01:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:01:42 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:01:42 Message to Master queued w/err=0: serial=55341 error=0 06:01:47 Received message from Master: op=Filter serial=55342 06:01:47 Color wheel filter change from 0 to 0 06:01:47 FLIGetFilterPos err=0 currentPosition=0 06:01:47 FLIGetStepsRemaining err=0 RemainingSteps=0 06:01:47 Filter is already there-color wheel unchanged 06:01:47 Received message from Master: op=Shutter serial=55343 06:01:47 Shutter LASER open 06:01:47 Received message from Camera: op=State serial=55345 06:01:47 GetSingleValue result=40 Value=cccccccc 06:01:47 SkyScan query 06:01:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:01:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:47 Parameters OK 06:01:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:47 Set A/D data flow result=40 06:01:47 Set A/D channel type result=40 06:01:47 Set A/D encoding result=40 06:01:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:47 Set channel filter=0.000000e+000 result=40 06:01:47 Config A/D Result=40 06:01:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:47 Get A/D filter: -9.255963e+061 result=40 06:01:47 Get A/D value=-858993460 result=40 06:01:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:47 Parameters OK 06:01:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:47 Set A/D data flow result=40 06:01:47 Set A/D channel type result=40 06:01:47 Set A/D encoding result=40 06:01:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:47 Set channel filter=0.000000e+000 result=40 06:01:47 Config A/D Result=40 06:01:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:47 Get A/D filter: -9.255963e+061 result=40 06:01:47 Get A/D value=-858993460 result=40 06:01:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:01:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:01:47 Aux= 06:01:47 Message to Camera, serial 55345 queued 06:01:56 Received message from Master: op=Shutter serial=55355 06:01:56 Shutter LASER close 06:01:56 Received message from Master: op=PointingHead serial=55359 06:01:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:01:56 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:01:57 Point started: ret=0 06:01:57 point_skyscan result=0 06:01:57 Check angles 06:01:57 SkyScan query 06:01:58 SkyScan query done: ret=0 az=89.88<-5992 ze=157.23<-1518 Statuses=0009 0009 06:01:58 Msec=0 True Az=89.88 Ze=157.23 Az status=0009 Ze status=0009 06:01:58 Check angles 06:01:58 SkyScan query 06:01:59 SkyScan query done: ret=0 az=71.97<-4798 ze=135.81<-2946 Statuses=0009 0009 06:01:59 Msec=750 True Az=71.97 Ze=135.81 Az status=0009 Ze status=0009 06:01:59 Check angles 06:01:59 SkyScan query 06:02:00 SkyScan query done: ret=0 az=54.405<-3627 ze=114.405<-4373 Statuses=0009 0009 06:02:00 Msec=1500 True Az=54.405 Ze=114.405 Az status=0009 Ze status=0009 06:02:00 Check angles 06:02:00 SkyScan query 06:02:00 SkyScan query done: ret=0 az=40.95<-2730 ze=93.48<-5768 Statuses=0009 0009 06:02:00 Msec=2250 True Az=40.95 Ze=93.48 Az status=0009 Ze status=0009 06:02:00 Check angles 06:02:00 SkyScan query 06:02:01 SkyScan query done: ret=0 az=40.995<-2733 ze=72.495<-7167 Statuses=0008 0009 06:02:01 Msec=3000 True Az=40.995 Ze=72.495 Az status=0008 Ze status=0009 06:02:01 Check angles 06:02:01 SkyScan query 06:02:02 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 06:02:02 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 06:02:02 Check angles 06:02:02 SkyScan query 06:02:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:02:03 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:02:03 Message to Master queued w/err=0: serial=55359 error=0 06:02:08 Received message from Master: op=Filter serial=55360 06:02:08 Color wheel filter change from 0 to 0 06:02:08 FLIGetFilterPos err=0 currentPosition=0 06:02:08 FLIGetStepsRemaining err=0 RemainingSteps=0 06:02:08 Filter is already there-color wheel unchanged 06:02:08 Received message from Master: op=Shutter serial=55361 06:02:08 Shutter LASER close 06:02:08 Received message from Camera: op=State serial=55363 06:02:08 GetSingleValue result=40 Value=cccccccc 06:02:08 SkyScan query 06:02:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:02:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:08 Parameters OK 06:02:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:08 Set A/D data flow result=40 06:02:08 Set A/D channel type result=40 06:02:08 Set A/D encoding result=40 06:02:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:08 Set channel filter=0.000000e+000 result=40 06:02:08 Config A/D Result=40 06:02:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:08 Get A/D filter: -9.255963e+061 result=40 06:02:08 Get A/D value=-858993460 result=40 06:02:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:08 Parameters OK 06:02:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:08 Set A/D data flow result=40 06:02:08 Set A/D channel type result=40 06:02:08 Set A/D encoding result=40 06:02:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:08 Set channel filter=0.000000e+000 result=40 06:02:08 Config A/D Result=40 06:02:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:08 Get A/D filter: -9.255963e+061 result=40 06:02:08 Get A/D value=-858993460 result=40 06:02:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:02:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:02:08 Aux= 06:02:08 Message to Camera, serial 55363 queued 06:02:45 Received message from Master: op=PointingHead serial=55376 06:02:45 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:02:45 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:02:46 Point started: ret=0 06:02:46 point_skyscan result=0 06:02:46 Check angles 06:02:46 SkyScan query 06:02:47 SkyScan query done: ret=0 az=63.81<-4254 ze=66.555<-7563 Statuses=0009 0008 06:02:47 Msec=0 True Az=63.81 Ze=66.555 Az status=0009 Ze status=0008 06:02:47 Check angles 06:02:47 SkyScan query 06:02:48 SkyScan query done: ret=0 az=81.525<-5435 ze=66.495<-7567 Statuses=0009 0008 06:02:48 Msec=750 True Az=81.525 Ze=66.495 Az status=0009 Ze status=0008 06:02:48 Check angles 06:02:48 SkyScan query 06:02:48 SkyScan query done: ret=0 az=99.66<-6644 ze=66.495<-7567 Statuses=0009 0008 06:02:48 Msec=1500 True Az=99.66 Ze=66.495 Az status=0009 Ze status=0008 06:02:49 Check angles 06:02:49 SkyScan query 06:02:49 SkyScan query done: ret=0 az=117.51<-7834 ze=66.495<-7567 Statuses=0009 0008 06:02:49 Msec=2250 True Az=117.51 Ze=66.495 Az status=0009 Ze status=0008 06:02:49 Check angles 06:02:49 SkyScan query 06:02:50 SkyScan query done: ret=0 az=134.835<-8989 ze=66.495<-7567 Statuses=0009 0008 06:02:50 Msec=3000 True Az=134.835 Ze=66.495 Az status=0009 Ze status=0008 06:02:50 Check angles 06:02:50 SkyScan query 06:02:51 SkyScan query done: ret=0 az=152.31<-10154 ze=66.495<-7567 Statuses=0009 0008 06:02:51 Msec=3750 True Az=152.31 Ze=66.495 Az status=0009 Ze status=0008 06:02:51 Check angles 06:02:51 SkyScan query 06:02:52 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:02:52 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 06:02:52 Message to Master queued w/err=0: serial=55376 error=0 06:02:57 Received message from Master: op=Filter serial=55377 06:02:57 Color wheel filter change from 0 to 0 06:02:57 FLIGetFilterPos err=0 currentPosition=0 06:02:57 FLIGetStepsRemaining err=0 RemainingSteps=0 06:02:57 Filter is already there-color wheel unchanged 06:02:57 Received message from Master: op=Shutter serial=55378 06:02:57 Shutter LASER close 06:02:57 Received message from Camera: op=State serial=55380 06:02:57 GetSingleValue result=40 Value=cccccccc 06:02:57 SkyScan query 06:02:57 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:02:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:57 Parameters OK 06:02:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:57 Set A/D data flow result=40 06:02:57 Set A/D channel type result=40 06:02:57 Set A/D encoding result=40 06:02:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:57 Set channel filter=0.000000e+000 result=40 06:02:57 Config A/D Result=40 06:02:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:57 Get A/D filter: -9.255963e+061 result=40 06:02:57 Get A/D value=-858993460 result=40 06:02:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:57 Parameters OK 06:02:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:57 Set A/D data flow result=40 06:02:57 Set A/D channel type result=40 06:02:57 Set A/D encoding result=40 06:02:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:57 Set channel filter=0.000000e+000 result=40 06:02:57 Config A/D Result=40 06:02:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:57 Get A/D filter: -9.255963e+061 result=40 06:02:57 Get A/D value=-858993460 result=40 06:02:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:57 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:02:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:02:57 Aux= 06:02:57 Message to Camera, serial 55380 queued 06:03:34 Received message from Master: op=PointingHead serial=55393 06:03:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:03:34 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:03:34 Point started: ret=0 06:03:34 point_skyscan result=0 06:03:35 Check angles 06:03:35 SkyScan query 06:03:36 SkyScan query done: ret=0 az=134.985<-8999 ze=36.825<-9545 Statuses=0009 0009 06:03:36 Msec=0 True Az=134.985 Ze=36.825 Az status=0009 Ze status=0009 06:03:36 Check angles 06:03:36 SkyScan query 06:03:37 SkyScan query done: ret=0 az=117.51<-7834 ze=15.885<-10941 Statuses=0009 0009 06:03:37 Msec=750 True Az=117.51 Ze=15.885 Az status=0009 Ze status=0009 06:03:37 Check angles 06:03:37 SkyScan query 06:03:37 SkyScan query done: ret=0 az=100.14<-6676 ze=-5.085<-12339 Statuses=0009 0009 06:03:37 Msec=1500 True Az=100.14 Ze=-5.085 Az status=0009 Ze status=0009 06:03:37 Check angles 06:03:37 SkyScan query 06:03:38 SkyScan query done: ret=0 az=82.65<-5510 ze=-26.025<-13735 Statuses=0009 0009 06:03:38 Msec=2250 True Az=82.65 Ze=-26.025 Az status=0009 Ze status=0009 06:03:38 Check angles 06:03:38 SkyScan query 06:03:39 SkyScan query done: ret=0 az=65.13<-4342 ze=-38.58<-14572 Statuses=0009 0008 06:03:39 Msec=3000 True Az=65.13 Ze=-38.58 Az status=0009 Ze status=0008 06:03:39 Check angles 06:03:39 SkyScan query 06:03:40 SkyScan query done: ret=0 az=47.73<-3182 ze=-38.52<-14568 Statuses=0009 0008 06:03:40 Msec=3750 True Az=47.73 Ze=-38.52 Az status=0009 Ze status=0008 06:03:40 Check angles 06:03:40 SkyScan query 06:03:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:03:40 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:03:40 Message to Master queued w/err=0: serial=55393 error=0 06:03:45 Received message from Master: op=Filter serial=55394 06:03:45 Color wheel filter change from 0 to 0 06:03:45 FLIGetFilterPos err=0 currentPosition=0 06:03:45 FLIGetStepsRemaining err=0 RemainingSteps=0 06:03:45 Filter is already there-color wheel unchanged 06:03:45 Received message from Master: op=Shutter serial=55395 06:03:45 Shutter LASER close 06:03:46 Received message from Camera: op=State serial=55397 06:03:46 GetSingleValue result=40 Value=cccccccc 06:03:46 SkyScan query 06:03:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:03:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:46 Parameters OK 06:03:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:46 Set A/D data flow result=40 06:03:46 Set A/D channel type result=40 06:03:46 Set A/D encoding result=40 06:03:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:46 Set channel filter=0.000000e+000 result=40 06:03:46 Config A/D Result=40 06:03:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:46 Get A/D filter: -9.255963e+061 result=40 06:03:46 Get A/D value=-858993460 result=40 06:03:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:46 Parameters OK 06:03:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:46 Set A/D data flow result=40 06:03:46 Set A/D channel type result=40 06:03:46 Set A/D encoding result=40 06:03:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:46 Set channel filter=0.000000e+000 result=40 06:03:46 Config A/D Result=40 06:03:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:46 Get A/D filter: -9.255963e+061 result=40 06:03:46 Get A/D value=-858993460 result=40 06:03:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:03:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:03:46 Aux= 06:03:46 Message to Camera, serial 55397 queued 06:04:23 Received message from Master: op=PointingHead serial=55410 06:04:23 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:04:23 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:04:23 Point started: ret=0 06:04:23 point_skyscan result=0 06:04:24 Check angles 06:04:24 SkyScan query 06:04:25 SkyScan query done: ret=0 az=64.065<-4271 ze=-68.355<-16557 Statuses=0009 0009 06:04:25 Msec=0 True Az=64.065 Ze=-68.355 Az status=0009 Ze status=0009 06:04:25 Check angles 06:04:25 SkyScan query 06:04:25 SkyScan query done: ret=0 az=81.345<-5423 ze=-89.37<-17958 Statuses=0009 0009 06:04:25 Msec=750 True Az=81.345 Ze=-89.37 Az status=0009 Ze status=0009 06:04:26 Check angles 06:04:26 SkyScan query 06:04:26 SkyScan query done: ret=0 az=98.985<-6599 ze=-110.31<-19354 Statuses=0009 0009 06:04:26 Msec=1500 True Az=98.985 Ze=-110.31 Az status=0009 Ze status=0009 06:04:26 Check angles 06:04:26 SkyScan query 06:04:27 SkyScan query done: ret=0 az=116.955<-7797 ze=-131.67<-20778 Statuses=0009 0009 06:04:27 Msec=2250 True Az=116.955 Ze=-131.67 Az status=0009 Ze status=0009 06:04:27 Check angles 06:04:27 SkyScan query 06:04:28 SkyScan query done: ret=0 az=131.16<-8744 ze=-141.555<-21437 Statuses=0009 0008 06:04:28 Msec=3000 True Az=131.16 Ze=-141.555 Az status=0009 Ze status=0008 06:04:28 Check angles 06:04:28 SkyScan query 06:04:28 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 06:04:28 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 06:04:28 Message to Master queued w/err=0: serial=55410 error=0 06:04:33 Received message from Master: op=Filter serial=55411 06:04:33 Color wheel filter change from 0 to 0 06:04:33 FLIGetFilterPos err=0 currentPosition=0 06:04:33 FLIGetStepsRemaining err=0 RemainingSteps=0 06:04:33 Filter is already there-color wheel unchanged 06:04:34 Received message from Master: op=Shutter serial=55412 06:04:34 Shutter LASER close 06:04:34 Received message from Camera: op=State serial=55414 06:04:34 GetSingleValue result=40 Value=cccccccc 06:04:34 SkyScan query 06:04:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:04:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:34 Parameters OK 06:04:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:34 Set A/D data flow result=40 06:04:34 Set A/D channel type result=40 06:04:34 Set A/D encoding result=40 06:04:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:34 Set channel filter=0.000000e+000 result=40 06:04:34 Config A/D Result=40 06:04:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:34 Get A/D filter: -9.255963e+061 result=40 06:04:34 Get A/D value=-858993460 result=40 06:04:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:34 Parameters OK 06:04:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:34 Set A/D data flow result=40 06:04:34 Set A/D channel type result=40 06:04:34 Set A/D encoding result=40 06:04:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:34 Set channel filter=0.000000e+000 result=40 06:04:34 Config A/D Result=40 06:04:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:34 Get A/D filter: -9.255963e+061 result=40 06:04:34 Get A/D value=-858993460 result=40 06:04:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:34 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:04:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:04:34 Aux= 06:04:34 Message to Camera, serial 55414 queued 06:05:11 Received message from Master: op=PointingHead serial=55427 06:05:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:05:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:05:11 Point started: ret=0 06:05:11 point_skyscan result=0 06:05:12 Check angles 06:05:12 SkyScan query 06:05:13 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.045<-23403 Statuses=0009 0009 06:05:13 Msec=0 True Az=113.01 Ze=-171.045 Az status=0009 Ze status=0009 06:05:13 Check angles 06:05:13 SkyScan query 06:05:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:05:13 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:05:13 Message to Master queued w/err=0: serial=55427 error=0 06:05:18 Received message from Master: op=Filter serial=55428 06:05:18 Color wheel filter change from 0 to 0 06:05:18 FLIGetFilterPos err=0 currentPosition=0 06:05:18 FLIGetStepsRemaining err=0 RemainingSteps=0 06:05:18 Filter is already there-color wheel unchanged 06:05:19 Received message from Master: op=Shutter serial=55429 06:05:19 Shutter LASER open 06:05:19 Received message from Camera: op=State serial=55431 06:05:19 GetSingleValue result=40 Value=cccccccc 06:05:19 SkyScan query 06:05:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:05:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:19 Parameters OK 06:05:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:19 Set A/D data flow result=40 06:05:19 Set A/D channel type result=40 06:05:19 Set A/D encoding result=40 06:05:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:19 Set channel filter=0.000000e+000 result=40 06:05:19 Config A/D Result=40 06:05:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:19 Get A/D filter: -9.255963e+061 result=40 06:05:19 Get A/D value=-858993460 result=40 06:05:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:19 Parameters OK 06:05:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:19 Set A/D data flow result=40 06:05:19 Set A/D channel type result=40 06:05:19 Set A/D encoding result=40 06:05:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:19 Set channel filter=0.000000e+000 result=40 06:05:19 Config A/D Result=40 06:05:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:19 Get A/D filter: -9.255963e+061 result=40 06:05:19 Get A/D value=-858993460 result=40 06:05:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:05:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:05:19 Aux= 06:05:19 Message to Camera, serial 55431 queued 06:05:28 Received message from Master: op=Shutter serial=55441 06:05:28 Shutter LASER close 06:05:28 Received message from Master: op=PointingHead serial=55445 06:05:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:05:28 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:05:29 Point started: ret=0 06:05:29 point_skyscan result=0 06:05:30 Check angles 06:05:30 SkyScan query 06:05:30 SkyScan query done: ret=0 az=135.81<-9054 ze=-143.355<-21557 Statuses=0009 0009 06:05:30 Msec=0 True Az=135.81 Ze=-143.355 Az status=0009 Ze status=0009 06:05:30 Check angles 06:05:30 SkyScan query 06:05:31 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.4<-20160 Statuses=0009 0009 06:05:31 Msec=750 True Az=153.36 Ze=-122.4 Az status=0009 Ze status=0009 06:05:31 Check angles 06:05:31 SkyScan query 06:05:32 SkyScan query done: ret=0 az=170.76<-11384 ze=-101.4<-18760 Statuses=0009 0009 06:05:32 Msec=1500 True Az=170.76 Ze=-101.4 Az status=0009 Ze status=0009 06:05:32 Check angles 06:05:32 SkyScan query 06:05:32 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.49<-17366 Statuses=0008 0009 06:05:32 Msec=2250 True Az=176.025 Ze=-80.49 Az status=0008 Ze status=0009 06:05:33 Check angles 06:05:33 SkyScan query 06:05:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.1<-15940 Statuses=0008 0009 06:05:33 Msec=3000 True Az=176.01 Ze=-59.1 Az status=0008 Ze status=0009 06:05:33 Check angles 06:05:33 SkyScan query 06:05:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:05:34 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:05:34 Message to Master queued w/err=0: serial=55445 error=0 06:05:39 Received message from Master: op=Filter serial=55446 06:05:39 Color wheel filter change from 0 to 0 06:05:39 FLIGetFilterPos err=0 currentPosition=0 06:05:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:05:39 Filter is already there-color wheel unchanged 06:05:39 Received message from Master: op=Shutter serial=55447 06:05:39 Shutter LASER close 06:05:39 Received message from Camera: op=State serial=55449 06:05:39 GetSingleValue result=40 Value=cccccccc 06:05:39 SkyScan query 06:05:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:05:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:40 Parameters OK 06:05:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:40 Set A/D data flow result=40 06:05:40 Set A/D channel type result=40 06:05:40 Set A/D encoding result=40 06:05:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:40 Set channel filter=0.000000e+000 result=40 06:05:40 Config A/D Result=40 06:05:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:40 Get A/D filter: -9.255963e+061 result=40 06:05:40 Get A/D value=-858993460 result=40 06:05:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:40 Parameters OK 06:05:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:40 Set A/D data flow result=40 06:05:40 Set A/D channel type result=40 06:05:40 Set A/D encoding result=40 06:05:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:40 Set channel filter=0.000000e+000 result=40 06:05:40 Config A/D Result=40 06:05:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:40 Get A/D filter: -9.255963e+061 result=40 06:05:40 Get A/D value=-858993460 result=40 06:05:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:05:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:05:40 Aux= 06:05:40 Message to Camera, serial 55449 queued 06:06:17 Received message from Master: op=PointingHead serial=55462 06:06:17 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:06:17 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:06:17 Point started: ret=0 06:06:17 point_skyscan result=0 06:06:18 Check angles 06:06:18 SkyScan query 06:06:18 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.675<-13445 Statuses=0009 0009 06:06:18 Msec=0 True Az=152.955 Ze=-21.675 Az status=0009 Ze status=0009 06:06:18 Check angles 06:06:18 SkyScan query 06:06:19 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.255<-12017 Statuses=0009 0009 06:06:19 Msec=750 True Az=135.12 Ze=-0.255 Az status=0009 Ze status=0009 06:06:19 Check angles 06:06:19 SkyScan query [UTC 2018-12-11 06:06:20] 06:06:20 SkyScan query done: ret=0 az=117.51<-7834 ze=20.715<-10619 Statuses=0009 0009 06:06:20 Msec=1500 True Az=117.51 Ze=20.715 Az status=0009 Ze status=0009 06:06:20 Check angles 06:06:20 SkyScan query 06:06:21 SkyScan query done: ret=0 az=100.155<-6677 ze=41.64<-9224 Statuses=0009 0009 06:06:21 Msec=2250 True Az=100.155 Ze=41.64 Az status=0009 Ze status=0009 06:06:21 Check angles 06:06:21 SkyScan query 06:06:21 SkyScan query done: ret=0 az=86.055<-5737 ze=51.54<-8564 Statuses=0009 0008 06:06:21 Msec=3000 True Az=86.055 Ze=51.54 Az status=0009 Ze status=0008 06:06:21 Check angles 06:06:21 SkyScan query 06:06:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:06:22 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:06:22 Message to Master queued w/err=0: serial=55462 error=0 06:06:27 Received message from Master: op=Filter serial=55463 06:06:27 Color wheel filter change from 0 to 0 06:06:27 FLIGetFilterPos err=0 currentPosition=0 06:06:27 FLIGetStepsRemaining err=0 RemainingSteps=0 06:06:27 Filter is already there-color wheel unchanged 06:06:27 Received message from Master: op=Shutter serial=55464 06:06:27 Shutter LASER close 06:06:27 Received message from Camera: op=State serial=55466 06:06:27 GetSingleValue result=40 Value=cccccccc 06:06:27 SkyScan query 06:06:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:06:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:28 Parameters OK 06:06:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:28 Set A/D data flow result=40 06:06:28 Set A/D channel type result=40 06:06:28 Set A/D encoding result=40 06:06:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:28 Set channel filter=0.000000e+000 result=40 06:06:28 Config A/D Result=40 06:06:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:28 Get A/D filter: -9.255963e+061 result=40 06:06:28 Get A/D value=-858993460 result=40 06:06:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:28 Parameters OK 06:06:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:28 Set A/D data flow result=40 06:06:28 Set A/D channel type result=40 06:06:28 Set A/D encoding result=40 06:06:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:28 Set channel filter=0.000000e+000 result=40 06:06:28 Config A/D Result=40 06:06:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:28 Get A/D filter: -9.255963e+061 result=40 06:06:28 Get A/D value=-858993460 result=40 06:06:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:06:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:06:28 Aux= 06:06:28 Message to Camera, serial 55466 queued 06:07:05 Received message from Master: op=PointingHead serial=55479 06:07:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:07:05 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:07:05 Point started: ret=0 06:07:05 point_skyscan result=0 06:07:06 Check angles 06:07:06 SkyScan query 06:07:06 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 06:07:06 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 06:07:07 Check angles 06:07:07 SkyScan query 06:07:07 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 06:07:07 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 06:07:07 Check angles 06:07:07 SkyScan query 06:07:08 SkyScan query done: ret=0 az=144.165<-9611 ze=38.505<-9433 Statuses=0009 0008 06:07:08 Msec=1500 True Az=144.165 Ze=38.505 Az status=0009 Ze status=0008 06:07:08 Check angles 06:07:08 SkyScan query 06:07:09 SkyScan query done: ret=0 az=161.58<-10772 ze=38.505<-9433 Statuses=0009 0008 06:07:09 Msec=2250 True Az=161.58 Ze=38.505 Az status=0009 Ze status=0008 06:07:09 Check angles 06:07:09 SkyScan query 06:07:09 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:07:09 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:07:10 Check angles 06:07:10 SkyScan query 06:07:10 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:07:10 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:07:10 Message to Master queued w/err=0: serial=55479 error=0 06:07:15 Received message from Master: op=Filter serial=55480 06:07:15 Color wheel filter change from 0 to 0 06:07:15 FLIGetFilterPos err=0 currentPosition=0 06:07:15 FLIGetStepsRemaining err=0 RemainingSteps=0 06:07:15 Filter is already there-color wheel unchanged 06:07:15 Received message from Master: op=Shutter serial=55481 06:07:15 Shutter LASER close 06:07:15 Received message from Camera: op=State serial=55483 06:07:15 GetSingleValue result=40 Value=cccccccc 06:07:15 SkyScan query 06:07:16 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:07:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:16 Parameters OK 06:07:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:16 Set A/D data flow result=40 06:07:16 Set A/D channel type result=40 06:07:16 Set A/D encoding result=40 06:07:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:16 Set channel filter=0.000000e+000 result=40 06:07:16 Config A/D Result=40 06:07:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:16 Get A/D filter: -9.255963e+061 result=40 06:07:16 Get A/D value=-858993460 result=40 06:07:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:16 Parameters OK 06:07:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:16 Set A/D data flow result=40 06:07:16 Set A/D channel type result=40 06:07:16 Set A/D encoding result=40 06:07:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:16 Set channel filter=0.000000e+000 result=40 06:07:16 Config A/D Result=40 06:07:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:16 Get A/D filter: -9.255963e+061 result=40 06:07:16 Get A/D value=-858993460 result=40 06:07:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:07:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:07:16 Aux= 06:07:16 Message to Camera, serial 55483 queued 06:07:52 Received message from Master: op=PointingHead serial=55495 06:07:52 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:07:52 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:07:52 Point started: ret=0 06:07:52 point_skyscan result=0 06:07:53 Check angles 06:07:53 SkyScan query 06:07:53 SkyScan query done: ret=0 az=152.985<-10199 ze=8.775<-11415 Statuses=0009 0009 06:07:53 Msec=0 True Az=152.985 Ze=8.775 Az status=0009 Ze status=0009 06:07:54 Check angles 06:07:54 SkyScan query 06:07:54 SkyScan query done: ret=0 az=135.63<-9042 ze=-12.225<-12815 Statuses=0009 0009 06:07:54 Msec=750 True Az=135.63 Ze=-12.225 Az status=0009 Ze status=0009 06:07:54 Check angles 06:07:54 SkyScan query 06:07:55 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.555<-14237 Statuses=0009 0009 06:07:55 Msec=1500 True Az=117.57 Ze=-33.555 Az status=0009 Ze status=0009 06:07:55 Check angles 06:07:55 SkyScan query 06:07:56 SkyScan query done: ret=0 az=100.215<-6681 ze=-51.555<-15437 Statuses=0009 0009 06:07:56 Msec=2250 True Az=100.215 Ze=-51.555 Az status=0009 Ze status=0009 06:07:56 Check angles 06:07:56 SkyScan query 06:07:56 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 06:07:56 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 06:07:57 Check angles 06:07:57 SkyScan query 06:07:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:07:57 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:07:57 Message to Master queued w/err=0: serial=55495 error=0 06:08:02 Received message from Master: op=Filter serial=55496 06:08:02 Color wheel filter change from 0 to 0 06:08:02 FLIGetFilterPos err=0 currentPosition=0 06:08:02 FLIGetStepsRemaining err=0 RemainingSteps=0 06:08:02 Filter is already there-color wheel unchanged 06:08:02 Received message from Master: op=Shutter serial=55497 06:08:02 Shutter LASER close 06:08:02 Received message from Camera: op=State serial=55499 06:08:02 GetSingleValue result=40 Value=cccccccc 06:08:02 SkyScan query 06:08:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:08:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:03 Parameters OK 06:08:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:03 Set A/D data flow result=40 06:08:03 Set A/D channel type result=40 06:08:03 Set A/D encoding result=40 06:08:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:03 Set channel filter=0.000000e+000 result=40 06:08:03 Config A/D Result=40 06:08:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:03 Get A/D filter: -9.255963e+061 result=40 06:08:03 Get A/D value=-858993460 result=40 06:08:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:03 Parameters OK 06:08:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:03 Set A/D data flow result=40 06:08:03 Set A/D channel type result=40 06:08:03 Set A/D encoding result=40 06:08:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:03 Set channel filter=0.000000e+000 result=40 06:08:03 Config A/D Result=40 06:08:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:03 Get A/D filter: -9.255963e+061 result=40 06:08:03 Get A/D value=-858993460 result=40 06:08:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:08:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:08:03 Aux= 06:08:03 Message to Camera, serial 55499 queued 06:08:40 Received message from Master: op=PointingHead serial=55512 06:08:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:08:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:08:40 Point started: ret=0 06:08:40 point_skyscan result=0 06:08:41 Check angles 06:08:41 SkyScan query 06:08:42 SkyScan query done: ret=0 az=108.945<-7263 ze=-81.255<-17417 Statuses=0009 0009 06:08:42 Msec=0 True Az=108.945 Ze=-81.255 Az status=0009 Ze status=0009 06:08:42 Check angles 06:08:42 SkyScan query 06:08:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.675<-18845 Statuses=0008 0009 06:08:42 Msec=750 True Az=112.995 Ze=-102.675 Az status=0008 Ze status=0009 06:08:43 Check angles 06:08:43 SkyScan query 06:08:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.05<-20270 Statuses=0008 0009 06:08:43 Msec=1500 True Az=112.995 Ze=-124.05 Az status=0008 Ze status=0009 06:08:43 Check angles 06:08:43 SkyScan query 06:08:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.99<-21666 Statuses=0008 0009 06:08:44 Msec=2250 True Az=112.995 Ze=-144.99 Az status=0008 Ze status=0009 06:08:44 Check angles 06:08:44 SkyScan query 06:08:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.93<-23062 Statuses=0008 0009 06:08:45 Msec=3000 True Az=112.995 Ze=-165.93 Az status=0008 Ze status=0009 06:08:45 Check angles 06:08:45 SkyScan query 06:08:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:08:45 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:08:45 Message to Master queued w/err=0: serial=55512 error=0 06:08:50 Received message from Master: op=Filter serial=55513 06:08:50 Color wheel filter change from 0 to 0 06:08:50 FLIGetFilterPos err=0 currentPosition=0 06:08:50 FLIGetStepsRemaining err=0 RemainingSteps=0 06:08:50 Filter is already there-color wheel unchanged 06:08:51 Received message from Master: op=Shutter serial=55514 06:08:51 Shutter LASER open 06:08:51 Received message from Camera: op=State serial=55516 06:08:51 GetSingleValue result=40 Value=cccccccc 06:08:51 SkyScan query 06:08:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:08:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:51 Parameters OK 06:08:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:51 Set A/D data flow result=40 06:08:51 Set A/D channel type result=40 06:08:51 Set A/D encoding result=40 06:08:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:51 Set channel filter=0.000000e+000 result=40 06:08:51 Config A/D Result=40 06:08:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:51 Get A/D filter: -9.255963e+061 result=40 06:08:51 Get A/D value=-858993460 result=40 06:08:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:51 Parameters OK 06:08:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:51 Set A/D data flow result=40 06:08:51 Set A/D channel type result=40 06:08:51 Set A/D encoding result=40 06:08:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:51 Set channel filter=0.000000e+000 result=40 06:08:51 Config A/D Result=40 06:08:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:51 Get A/D filter: -9.255963e+061 result=40 06:08:51 Get A/D value=-858993460 result=40 06:08:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:08:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:08:51 Aux= 06:08:51 Message to Camera, serial 55516 queued 06:09:00 Received message from Master: op=Shutter serial=55526 06:09:00 Shutter LASER close 06:09:00 Received message from Master: op=PointingHead serial=55530 06:09:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:09:00 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:09:00 Point started: ret=0 06:09:00 point_skyscan result=0 06:09:01 Check angles 06:09:01 SkyScan query 06:09:02 SkyScan query done: ret=0 az=89.835<-5989 ze=157.485<-1501 Statuses=0009 0009 06:09:02 Msec=0 True Az=89.835 Ze=157.485 Az status=0009 Ze status=0009 06:09:02 Check angles 06:09:02 SkyScan query 06:09:03 SkyScan query done: ret=0 az=72.3<-4820 ze=136.47<-2902 Statuses=0009 0009 06:09:03 Msec=750 True Az=72.3 Ze=136.47 Az status=0009 Ze status=0009 06:09:03 Check angles 06:09:03 SkyScan query 06:09:03 SkyScan query done: ret=0 az=55.02<-3668 ze=115.59<-4294 Statuses=0009 0009 06:09:03 Msec=1500 True Az=55.02 Ze=115.59 Az status=0009 Ze status=0009 06:09:03 Check angles 06:09:03 SkyScan query 06:09:04 SkyScan query done: ret=0 az=40.86<-2724 ze=94.575<-5695 Statuses=0009 0009 06:09:04 Msec=2250 True Az=40.86 Ze=94.575 Az status=0009 Ze status=0009 06:09:04 Check angles 06:09:04 SkyScan query 06:09:05 SkyScan query done: ret=0 az=40.995<-2733 ze=73.65<-7090 Statuses=0008 0009 06:09:05 Msec=3000 True Az=40.995 Ze=73.65 Az status=0008 Ze status=0009 06:09:05 Check angles 06:09:05 SkyScan query 06:09:06 SkyScan query done: ret=0 az=40.995<-2733 ze=52.98<-8468 Statuses=0008 0009 06:09:06 Msec=3750 True Az=40.995 Ze=52.98 Az status=0008 Ze status=0009 06:09:06 Check angles 06:09:06 SkyScan query 06:09:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:09:06 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:09:06 Message to Master queued w/err=0: serial=55530 error=0 06:09:11 Received message from Master: op=Filter serial=55531 06:09:11 Color wheel filter change from 0 to 0 06:09:11 FLIGetFilterPos err=0 currentPosition=0 06:09:11 FLIGetStepsRemaining err=0 RemainingSteps=0 06:09:11 Filter is already there-color wheel unchanged 06:09:11 Received message from Master: op=Shutter serial=55532 06:09:11 Shutter LASER close 06:09:12 Received message from Camera: op=State serial=55534 06:09:12 GetSingleValue result=40 Value=cccccccc 06:09:12 SkyScan query 06:09:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:09:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:12 Parameters OK 06:09:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:12 Set A/D data flow result=40 06:09:12 Set A/D channel type result=40 06:09:12 Set A/D encoding result=40 06:09:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:12 Set channel filter=0.000000e+000 result=40 06:09:12 Config A/D Result=40 06:09:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:12 Get A/D filter: -9.255963e+061 result=40 06:09:12 Get A/D value=-858993460 result=40 06:09:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:12 Parameters OK 06:09:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:12 Set A/D data flow result=40 06:09:12 Set A/D channel type result=40 06:09:12 Set A/D encoding result=40 06:09:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:12 Set channel filter=0.000000e+000 result=40 06:09:12 Config A/D Result=40 06:09:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:12 Get A/D filter: -9.255963e+061 result=40 06:09:12 Get A/D value=-858993460 result=40 06:09:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:09:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:09:12 Aux= 06:09:12 Message to Camera, serial 55534 queued 06:09:48 Received message from Master: op=PointingHead serial=55546 06:09:48 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:09:48 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:09:48 Point started: ret=0 06:09:48 point_skyscan result=0 06:09:49 Check angles 06:09:49 SkyScan query 06:09:50 SkyScan query done: ret=0 az=64.23<-4282 ze=66.54<-7564 Statuses=0009 0008 06:09:50 Msec=0 True Az=64.23 Ze=66.54 Az status=0009 Ze status=0008 06:09:50 Check angles 06:09:50 SkyScan query 06:09:51 SkyScan query done: ret=0 az=82.005<-5467 ze=66.51<-7566 Statuses=0009 0008 06:09:51 Msec=750 True Az=82.005 Ze=66.51 Az status=0009 Ze status=0008 06:09:51 Check angles 06:09:51 SkyScan query 06:09:51 SkyScan query done: ret=0 az=99.66<-6644 ze=66.495<-7567 Statuses=0009 0008 06:09:51 Msec=1500 True Az=99.66 Ze=66.495 Az status=0009 Ze status=0008 06:09:52 Check angles 06:09:52 SkyScan query 06:09:52 SkyScan query done: ret=0 az=117.405<-7827 ze=66.495<-7567 Statuses=0009 0008 06:09:52 Msec=2250 True Az=117.405 Ze=66.495 Az status=0009 Ze status=0008 06:09:52 Check angles 06:09:52 SkyScan query 06:09:53 SkyScan query done: ret=0 az=135.075<-9005 ze=66.495<-7567 Statuses=0009 0008 06:09:53 Msec=3000 True Az=135.075 Ze=66.495 Az status=0009 Ze status=0008 06:09:53 Check angles 06:09:53 SkyScan query 06:09:54 SkyScan query done: ret=0 az=153.09<-10206 ze=66.495<-7567 Statuses=0009 0008 06:09:54 Msec=3750 True Az=153.09 Ze=66.495 Az status=0009 Ze status=0008 06:09:54 Check angles 06:09:54 SkyScan query 06:09:54 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:09:54 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 06:09:54 Message to Master queued w/err=0: serial=55546 error=0 06:09:59 Received message from Master: op=Filter serial=55547 06:09:59 Color wheel filter change from 0 to 0 06:09:59 FLIGetFilterPos err=0 currentPosition=0 06:09:59 FLIGetStepsRemaining err=0 RemainingSteps=0 06:09:59 Filter is already there-color wheel unchanged 06:10:00 Received message from Master: op=Shutter serial=55548 06:10:00 Shutter LASER close 06:10:00 Received message from Camera: op=State serial=55550 06:10:00 GetSingleValue result=40 Value=cccccccc 06:10:00 SkyScan query 06:10:00 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:10:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:00 Parameters OK 06:10:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:00 Set A/D data flow result=40 06:10:00 Set A/D channel type result=40 06:10:00 Set A/D encoding result=40 06:10:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:00 Set channel filter=0.000000e+000 result=40 06:10:00 Config A/D Result=40 06:10:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:00 Get A/D filter: -9.255963e+061 result=40 06:10:00 Get A/D value=-858993460 result=40 06:10:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:00 Parameters OK 06:10:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:00 Set A/D data flow result=40 06:10:00 Set A/D channel type result=40 06:10:00 Set A/D encoding result=40 06:10:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:00 Set channel filter=0.000000e+000 result=40 06:10:00 Config A/D Result=40 06:10:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:00 Get A/D filter: -9.255963e+061 result=40 06:10:00 Get A/D value=-858993460 result=40 06:10:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:00 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:10:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:10:00 Aux= 06:10:00 Message to Camera, serial 55550 queued 06:10:37 Received message from Master: op=PointingHead serial=55563 06:10:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:10:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:10:37 Point started: ret=0 06:10:37 point_skyscan result=0 06:10:38 Check angles 06:10:38 SkyScan query 06:10:39 SkyScan query done: ret=0 az=134.745<-8983 ze=36.45<-9570 Statuses=0009 0009 06:10:39 Msec=0 True Az=134.745 Ze=36.45 Az status=0009 Ze status=0009 06:10:39 Check angles 06:10:39 SkyScan query 06:10:39 SkyScan query done: ret=0 az=117.225<-7815 ze=15.54<-10964 Statuses=0009 0009 06:10:39 Msec=750 True Az=117.225 Ze=15.54 Az status=0009 Ze status=0009 06:10:40 Check angles 06:10:40 SkyScan query 06:10:40 SkyScan query done: ret=0 az=99.48<-6632 ze=-5.88<-12392 Statuses=0009 0009 06:10:40 Msec=1500 True Az=99.48 Ze=-5.88 Az status=0009 Ze status=0009 06:10:40 Check angles 06:10:40 SkyScan query 06:10:41 SkyScan query done: ret=0 az=82.05<-5470 ze=-26.85<-13790 Statuses=0009 0009 06:10:41 Msec=2250 True Az=82.05 Ze=-26.85 Az status=0009 Ze status=0009 06:10:41 Check angles 06:10:41 SkyScan query 06:10:42 SkyScan query done: ret=0 az=64.515<-4301 ze=-38.565<-14571 Statuses=0009 0008 06:10:42 Msec=3000 True Az=64.515 Ze=-38.565 Az status=0009 Ze status=0008 06:10:42 Check angles 06:10:42 SkyScan query 06:10:42 SkyScan query done: ret=0 az=47.1<-3140 ze=-38.535<-14569 Statuses=0009 0008 06:10:42 Msec=3750 True Az=47.1 Ze=-38.535 Az status=0009 Ze status=0008 06:10:43 Check angles 06:10:43 SkyScan query 06:10:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:10:43 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:10:43 Message to Master queued w/err=0: serial=55563 error=0 06:10:48 Received message from Master: op=Filter serial=55564 06:10:48 Color wheel filter change from 0 to 0 06:10:48 FLIGetFilterPos err=0 currentPosition=0 06:10:48 FLIGetStepsRemaining err=0 RemainingSteps=0 06:10:48 Filter is already there-color wheel unchanged 06:10:48 Received message from Master: op=Shutter serial=55565 06:10:48 Shutter LASER close 06:10:48 Received message from Camera: op=State serial=55567 06:10:48 GetSingleValue result=40 Value=cccccccc 06:10:48 SkyScan query 06:10:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:10:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:49 Parameters OK 06:10:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:49 Set A/D data flow result=40 06:10:49 Set A/D channel type result=40 06:10:49 Set A/D encoding result=40 06:10:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:49 Set channel filter=0.000000e+000 result=40 06:10:49 Config A/D Result=40 06:10:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:49 Get A/D filter: -9.255963e+061 result=40 06:10:49 Get A/D value=-858993460 result=40 06:10:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:49 Parameters OK 06:10:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:49 Set A/D data flow result=40 06:10:49 Set A/D channel type result=40 06:10:49 Set A/D encoding result=40 06:10:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:49 Set channel filter=0.000000e+000 result=40 06:10:49 Config A/D Result=40 06:10:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:49 Get A/D filter: -9.255963e+061 result=40 06:10:49 Get A/D value=-858993460 result=40 06:10:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:10:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:10:49 Aux= 06:10:49 Message to Camera, serial 55567 queued 06:11:26 Received message from Master: op=PointingHead serial=55580 06:11:26 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:11:26 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:11:26 Point started: ret=0 06:11:26 point_skyscan result=0 06:11:27 Check angles 06:11:27 SkyScan query 06:11:27 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.04<-16536 Statuses=0009 0009 06:11:27 Msec=0 True Az=63.795 Ze=-68.04 Az status=0009 Ze status=0009 06:11:28 Check angles 06:11:28 SkyScan query 06:11:28 SkyScan query done: ret=0 az=81.525<-5435 ze=-89.505<-17967 Statuses=0009 0009 06:11:28 Msec=750 True Az=81.525 Ze=-89.505 Az status=0009 Ze status=0009 06:11:28 Check angles 06:11:28 SkyScan query 06:11:29 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.475<-19365 Statuses=0009 0009 06:11:29 Msec=1500 True Az=99.12 Ze=-110.475 Az status=0009 Ze status=0009 06:11:29 Check angles 06:11:29 SkyScan query 06:11:30 SkyScan query done: ret=0 az=116.82<-7788 ze=-131.4<-20760 Statuses=0009 0009 06:11:30 Msec=2250 True Az=116.82 Ze=-131.4 Az status=0009 Ze status=0009 06:11:30 Check angles 06:11:30 SkyScan query 06:11:31 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 06:11:31 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 06:11:31 Check angles 06:11:31 SkyScan query 06:11:31 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:11:31 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:11:31 Message to Master queued w/err=0: serial=55580 error=0 06:11:36 Received message from Master: op=Filter serial=55581 06:11:36 Color wheel filter change from 0 to 0 06:11:36 FLIGetFilterPos err=0 currentPosition=0 06:11:36 FLIGetStepsRemaining err=0 RemainingSteps=0 06:11:36 Filter is already there-color wheel unchanged 06:11:36 Received message from Master: op=Shutter serial=55582 06:11:36 Shutter LASER close 06:11:36 Received message from Camera: op=State serial=55584 06:11:36 GetSingleValue result=40 Value=cccccccc 06:11:36 SkyScan query 06:11:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:11:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:37 Parameters OK 06:11:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:37 Set A/D data flow result=40 06:11:37 Set A/D channel type result=40 06:11:37 Set A/D encoding result=40 06:11:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:37 Set channel filter=0.000000e+000 result=40 06:11:37 Config A/D Result=40 06:11:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:37 Get A/D filter: -9.255963e+061 result=40 06:11:37 Get A/D value=-858993460 result=40 06:11:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:37 Parameters OK 06:11:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:37 Set A/D data flow result=40 06:11:37 Set A/D channel type result=40 06:11:37 Set A/D encoding result=40 06:11:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:37 Set channel filter=0.000000e+000 result=40 06:11:37 Config A/D Result=40 06:11:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:37 Get A/D filter: -9.255963e+061 result=40 06:11:37 Get A/D value=-858993460 result=40 06:11:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:37 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:11:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:11:37 Aux= 06:11:37 Message to Camera, serial 55584 queued 06:12:14 Received message from Master: op=PointingHead serial=55597 06:12:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:12:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:12:14 Point started: ret=0 06:12:14 point_skyscan result=0 06:12:15 Check angles 06:12:15 SkyScan query 06:12:16 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.33<-23422 Statuses=0009 0009 06:12:16 Msec=0 True Az=113.01 Ze=-171.33 Az status=0009 Ze status=0009 06:12:16 Check angles 06:12:16 SkyScan query 06:12:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:12:16 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:12:16 Message to Master queued w/err=0: serial=55597 error=0 06:12:21 Received message from Master: op=Filter serial=55598 06:12:21 Color wheel filter change from 0 to 0 06:12:21 FLIGetFilterPos err=0 currentPosition=0 06:12:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:12:21 Filter is already there-color wheel unchanged 06:12:21 Received message from Master: op=Shutter serial=55599 06:12:21 Shutter LASER open 06:12:22 Received message from Camera: op=State serial=55601 06:12:22 GetSingleValue result=40 Value=cccccccc 06:12:22 SkyScan query 06:12:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:12:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:22 Parameters OK 06:12:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:22 Set A/D data flow result=40 06:12:22 Set A/D channel type result=40 06:12:22 Set A/D encoding result=40 06:12:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:22 Set channel filter=0.000000e+000 result=40 06:12:22 Config A/D Result=40 06:12:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:22 Get A/D filter: -9.255963e+061 result=40 06:12:22 Get A/D value=-858993460 result=40 06:12:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:22 Parameters OK 06:12:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:22 Set A/D data flow result=40 06:12:22 Set A/D channel type result=40 06:12:22 Set A/D encoding result=40 06:12:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:22 Set channel filter=0.000000e+000 result=40 06:12:22 Config A/D Result=40 06:12:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:22 Get A/D filter: -9.255963e+061 result=40 06:12:22 Get A/D value=-858993460 result=40 06:12:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:12:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:12:22 Aux= 06:12:22 Message to Camera, serial 55601 queued 06:12:31 Received message from Master: op=Shutter serial=55611 06:12:31 Shutter LASER close 06:12:31 Received message from Master: op=PointingHead serial=55615 06:12:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:12:31 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:12:32 Point started: ret=0 06:12:32 point_skyscan result=0 06:12:32 Check angles 06:12:32 SkyScan query 06:12:33 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.19<-21546 Statuses=0009 0009 06:12:33 Msec=0 True Az=136.155 Ze=-143.19 Az status=0009 Ze status=0009 06:12:33 Check angles 06:12:33 SkyScan query 06:12:34 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.205<-20147 Statuses=0009 0009 06:12:34 Msec=750 True Az=153.615 Ze=-122.205 Az status=0009 Ze status=0009 06:12:34 Check angles 06:12:34 SkyScan query 06:12:34 SkyScan query done: ret=0 az=171.045<-11403 ze=-101.31<-18754 Statuses=0009 0009 06:12:34 Msec=1500 True Az=171.045 Ze=-101.31 Az status=0009 Ze status=0009 06:12:35 Check angles 06:12:35 SkyScan query 06:12:35 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.325<-17355 Statuses=0008 0009 06:12:35 Msec=2250 True Az=176.025 Ze=-80.325 Az status=0008 Ze status=0009 06:12:35 Check angles 06:12:35 SkyScan query 06:12:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.385<-15959 Statuses=0008 0009 06:12:36 Msec=3000 True Az=175.995 Ze=-59.385 Az status=0008 Ze status=0009 06:12:36 Check angles 06:12:36 SkyScan query 06:12:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:12:37 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:12:37 Message to Master queued w/err=0: serial=55615 error=0 06:12:42 Received message from Master: op=Filter serial=55616 06:12:42 Color wheel filter change from 0 to 0 06:12:42 FLIGetFilterPos err=0 currentPosition=0 06:12:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:12:42 Filter is already there-color wheel unchanged 06:12:42 Received message from Master: op=Shutter serial=55617 06:12:42 Shutter LASER close 06:12:42 Received message from Camera: op=State serial=55619 06:12:42 GetSingleValue result=40 Value=cccccccc 06:12:42 SkyScan query 06:12:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:12:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:43 Parameters OK 06:12:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:43 Set A/D data flow result=40 06:12:43 Set A/D channel type result=40 06:12:43 Set A/D encoding result=40 06:12:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:43 Set channel filter=0.000000e+000 result=40 06:12:43 Config A/D Result=40 06:12:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:43 Get A/D filter: -9.255963e+061 result=40 06:12:43 Get A/D value=-858993460 result=40 06:12:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:43 Parameters OK 06:12:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:43 Set A/D data flow result=40 06:12:43 Set A/D channel type result=40 06:12:43 Set A/D encoding result=40 06:12:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:43 Set channel filter=0.000000e+000 result=40 06:12:43 Config A/D Result=40 06:12:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:43 Get A/D filter: -9.255963e+061 result=40 06:12:43 Get A/D value=-858993460 result=40 06:12:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:12:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:12:43 Aux= 06:12:43 Message to Camera, serial 55619 queued 06:13:19 Received message from Master: op=PointingHead serial=55632 06:13:19 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:13:19 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:13:20 Point started: ret=0 06:13:20 point_skyscan result=0 06:13:21 Check angles 06:13:21 SkyScan query 06:13:21 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.99<-13466 Statuses=0009 0009 06:13:21 Msec=0 True Az=153.18 Ze=-21.99 Az status=0009 Ze status=0009 06:13:21 Check angles 06:13:21 SkyScan query 06:13:22 SkyScan query done: ret=0 az=135.825<-9055 ze=-1.005<-12067 Statuses=0009 0009 06:13:22 Msec=750 True Az=135.825 Ze=-1.005 Az status=0009 Ze status=0009 06:13:22 Check angles 06:13:22 SkyScan query 06:13:23 SkyScan query done: ret=0 az=118.2<-7880 ze=20.04<-10664 Statuses=0009 0009 06:13:23 Msec=1500 True Az=118.2 Ze=20.04 Az status=0009 Ze status=0009 06:13:23 Check angles 06:13:23 SkyScan query 06:13:23 SkyScan query done: ret=0 az=100.635<-6709 ze=40.935<-9271 Statuses=0009 0009 06:13:23 Msec=2250 True Az=100.635 Ze=40.935 Az status=0009 Ze status=0009 06:13:24 Check angles 06:13:24 SkyScan query 06:13:24 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 06:13:24 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 06:13:24 Check angles 06:13:24 SkyScan query 06:13:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:13:25 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:13:25 Message to Master queued w/err=0: serial=55632 error=0 06:13:30 Received message from Master: op=Filter serial=55633 06:13:30 Color wheel filter change from 0 to 0 06:13:30 FLIGetFilterPos err=0 currentPosition=0 06:13:30 FLIGetStepsRemaining err=0 RemainingSteps=0 06:13:30 Filter is already there-color wheel unchanged 06:13:30 Received message from Master: op=Shutter serial=55634 06:13:30 Shutter LASER close 06:13:30 Received message from Camera: op=State serial=55636 06:13:30 GetSingleValue result=40 Value=cccccccc 06:13:30 SkyScan query 06:13:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:13:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:31 Parameters OK 06:13:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:31 Set A/D data flow result=40 06:13:31 Set A/D channel type result=40 06:13:31 Set A/D encoding result=40 06:13:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:31 Set channel filter=0.000000e+000 result=40 06:13:31 Config A/D Result=40 06:13:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:31 Get A/D filter: -9.255963e+061 result=40 06:13:31 Get A/D value=-858993460 result=40 06:13:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:31 Parameters OK 06:13:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:31 Set A/D data flow result=40 06:13:31 Set A/D channel type result=40 06:13:31 Set A/D encoding result=40 06:13:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:31 Set channel filter=0.000000e+000 result=40 06:13:31 Config A/D Result=40 06:13:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:31 Get A/D filter: -9.255963e+061 result=40 06:13:31 Get A/D value=-858993460 result=40 06:13:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:13:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:13:31 Aux= 06:13:31 Message to Camera, serial 55636 queued 06:14:08 Received message from Master: op=PointingHead serial=55649 06:14:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:14:08 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:14:08 Point started: ret=0 06:14:08 point_skyscan result=0 06:14:09 Check angles 06:14:09 SkyScan query 06:14:09 SkyScan query done: ret=0 az=109.365<-7291 ze=38.49<-9434 Statuses=0009 0008 06:14:09 Msec=0 True Az=109.365 Ze=38.49 Az status=0009 Ze status=0008 06:14:09 Check angles 06:14:09 SkyScan query 06:14:10 SkyScan query done: ret=0 az=126.81<-8454 ze=38.505<-9433 Statuses=0009 0008 06:14:10 Msec=750 True Az=126.81 Ze=38.505 Az status=0009 Ze status=0008 06:14:10 Check angles 06:14:10 SkyScan query 06:14:11 SkyScan query done: ret=0 az=144.555<-9637 ze=38.505<-9433 Statuses=0009 0008 06:14:11 Msec=1500 True Az=144.555 Ze=38.505 Az status=0009 Ze status=0008 06:14:11 Check angles 06:14:11 SkyScan query 06:14:12 SkyScan query done: ret=0 az=162<-10800 ze=38.505<-9433 Statuses=0009 0008 06:14:12 Msec=2250 True Az=162 Ze=38.505 Az status=0009 Ze status=0008 06:14:12 Check angles 06:14:12 SkyScan query 06:14:12 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:14:12 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:14:12 Check angles 06:14:12 SkyScan query 06:14:13 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:14:13 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:14:13 Message to Master queued w/err=0: serial=55649 error=0 06:14:18 Received message from Master: op=Filter serial=55650 06:14:18 Color wheel filter change from 0 to 0 06:14:18 FLIGetFilterPos err=0 currentPosition=0 06:14:18 FLIGetStepsRemaining err=0 RemainingSteps=0 06:14:18 Filter is already there-color wheel unchanged 06:14:18 Received message from Master: op=Shutter serial=55651 06:14:18 Shutter LASER close 06:14:18 Received message from Camera: op=State serial=55653 06:14:18 GetSingleValue result=40 Value=cccccccc 06:14:18 SkyScan query 06:14:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:14:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:19 Parameters OK 06:14:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:19 Set A/D data flow result=40 06:14:19 Set A/D channel type result=40 06:14:19 Set A/D encoding result=40 06:14:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:19 Set channel filter=0.000000e+000 result=40 06:14:19 Config A/D Result=40 06:14:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:19 Get A/D filter: -9.255963e+061 result=40 06:14:19 Get A/D value=-858993460 result=40 06:14:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:19 Parameters OK 06:14:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:19 Set A/D data flow result=40 06:14:19 Set A/D channel type result=40 06:14:19 Set A/D encoding result=40 06:14:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:19 Set channel filter=0.000000e+000 result=40 06:14:19 Config A/D Result=40 06:14:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:19 Get A/D filter: -9.255963e+061 result=40 06:14:19 Get A/D value=-858993460 result=40 06:14:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:14:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:14:19 Aux= 06:14:19 Message to Camera, serial 55653 queued 06:14:56 Received message from Master: op=PointingHead serial=55666 06:14:56 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:14:56 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:14:56 Point started: ret=0 06:14:56 point_skyscan result=0 06:14:57 Check angles 06:14:57 SkyScan query 06:14:57 SkyScan query done: ret=0 az=153.255<-10217 ze=8.985<-11401 Statuses=0009 0009 06:14:57 Msec=0 True Az=153.255 Ze=8.985 Az status=0009 Ze status=0009 06:14:57 Check angles 06:14:57 SkyScan query 06:14:58 SkyScan query done: ret=0 az=135.465<-9031 ze=-12.405<-12827 Statuses=0009 0009 06:14:58 Msec=750 True Az=135.465 Ze=-12.405 Az status=0009 Ze status=0009 06:14:58 Check angles 06:14:58 SkyScan query 06:14:59 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.33<-14222 Statuses=0009 0009 06:14:59 Msec=1500 True Az=117.765 Ze=-33.33 Az status=0009 Ze status=0009 06:14:59 Check angles 06:14:59 SkyScan query 06:15:00 SkyScan query done: ret=0 az=100.17<-6678 ze=-51.57<-15438 Statuses=0009 0009 06:15:00 Msec=2250 True Az=100.17 Ze=-51.57 Az status=0009 Ze status=0009 06:15:00 Check angles 06:15:00 SkyScan query 06:15:00 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 06:15:00 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 06:15:01 Check angles 06:15:01 SkyScan query 06:15:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:15:01 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:15:01 Message to Master queued w/err=0: serial=55666 error=0 06:15:06 Received message from Master: op=Filter serial=55667 06:15:06 Color wheel filter change from 0 to 0 06:15:06 FLIGetFilterPos err=0 currentPosition=0 06:15:06 FLIGetStepsRemaining err=0 RemainingSteps=0 06:15:06 Filter is already there-color wheel unchanged 06:15:06 Received message from Master: op=Shutter serial=55668 06:15:06 Shutter LASER close 06:15:06 Received message from Camera: op=State serial=55670 06:15:06 GetSingleValue result=40 Value=cccccccc 06:15:06 SkyScan query 06:15:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:15:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:07 Parameters OK 06:15:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:07 Set A/D data flow result=40 06:15:07 Set A/D channel type result=40 06:15:07 Set A/D encoding result=40 06:15:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:07 Set channel filter=0.000000e+000 result=40 06:15:07 Config A/D Result=40 06:15:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:07 Get A/D filter: -9.255963e+061 result=40 06:15:07 Get A/D value=-858993460 result=40 06:15:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:07 Parameters OK 06:15:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:07 Set A/D data flow result=40 06:15:07 Set A/D channel type result=40 06:15:07 Set A/D encoding result=40 06:15:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:07 Set channel filter=0.000000e+000 result=40 06:15:07 Config A/D Result=40 06:15:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:07 Get A/D filter: -9.255963e+061 result=40 06:15:07 Get A/D value=-858993460 result=40 06:15:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:15:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:15:07 Aux= 06:15:07 Message to Camera, serial 55670 queued 06:15:29 Received message from Master: op=Identify serial=55671 06:15:44 Received message from Master: op=PointingHead serial=55686 06:15:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:15:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:15:44 Point started: ret=0 06:15:44 point_skyscan result=0 06:15:45 Check angles 06:15:45 SkyScan query 06:15:45 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.51<-17434 Statuses=0009 0009 06:15:45 Msec=0 True Az=109.155 Ze=-81.51 Az status=0009 Ze status=0009 06:15:46 Check angles 06:15:46 SkyScan query 06:15:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.87<-18858 Statuses=0008 0009 06:15:46 Msec=750 True Az=112.995 Ze=-102.87 Az status=0008 Ze status=0009 06:15:46 Check angles 06:15:46 SkyScan query 06:15:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.855<-20257 Statuses=0008 0009 06:15:47 Msec=1500 True Az=112.995 Ze=-123.855 Az status=0008 Ze status=0009 06:15:47 Check angles 06:15:47 SkyScan query 06:15:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.78<-21652 Statuses=0008 0009 06:15:48 Msec=2250 True Az=112.995 Ze=-144.78 Az status=0008 Ze status=0009 06:15:48 Check angles 06:15:48 SkyScan query 06:15:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.155<-23077 Statuses=0008 0009 06:15:48 Msec=3000 True Az=112.995 Ze=-166.155 Az status=0008 Ze status=0009 06:15:49 Check angles 06:15:49 SkyScan query 06:15:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:15:49 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:15:49 Message to Master queued w/err=0: serial=55686 error=0 [UTC 2018-12-11 06:15:54] 06:15:54 Received message from Master: op=Filter serial=55687 06:15:54 Color wheel filter change from 0 to 0 06:15:54 FLIGetFilterPos err=0 currentPosition=0 06:15:54 FLIGetStepsRemaining err=0 RemainingSteps=0 06:15:54 Filter is already there-color wheel unchanged 06:15:54 Received message from Master: op=Shutter serial=55688 06:15:54 Shutter LASER open 06:15:55 Received message from Camera: op=State serial=55690 06:15:55 GetSingleValue result=40 Value=cccccccc 06:15:55 SkyScan query 06:15:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:15:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:55 Parameters OK 06:15:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:55 Set A/D data flow result=40 06:15:55 Set A/D channel type result=40 06:15:55 Set A/D encoding result=40 06:15:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:55 Set channel filter=0.000000e+000 result=40 06:15:55 Config A/D Result=40 06:15:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:55 Get A/D filter: -9.255963e+061 result=40 06:15:55 Get A/D value=-858993460 result=40 06:15:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:55 Parameters OK 06:15:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:55 Set A/D data flow result=40 06:15:55 Set A/D channel type result=40 06:15:55 Set A/D encoding result=40 06:15:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:55 Set channel filter=0.000000e+000 result=40 06:15:55 Config A/D Result=40 06:15:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:55 Get A/D filter: -9.255963e+061 result=40 06:15:55 Get A/D value=-858993460 result=40 06:15:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:15:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:15:55 Aux= 06:15:55 Message to Camera, serial 55690 queued 06:16:04 Received message from Master: op=Shutter serial=55700 06:16:04 Shutter LASER close 06:16:04 Received message from Master: op=PointingHead serial=55704 06:16:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:16:04 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:16:04 Point started: ret=0 06:16:04 point_skyscan result=0 06:16:05 Check angles 06:16:05 SkyScan query 06:16:06 SkyScan query done: ret=0 az=90.135<-6009 ze=157.44<-1504 Statuses=0009 0009 06:16:06 Msec=0 True Az=90.135 Ze=157.44 Az status=0009 Ze status=0009 06:16:06 Check angles 06:16:06 SkyScan query 06:16:06 SkyScan query done: ret=0 az=72.075<-4805 ze=136.035<-2931 Statuses=0009 0009 06:16:06 Msec=750 True Az=72.075 Ze=136.035 Az status=0009 Ze status=0009 06:16:07 Check angles 06:16:07 SkyScan query 06:16:07 SkyScan query done: ret=0 az=54.87<-3658 ze=115.125<-4325 Statuses=0009 0009 06:16:07 Msec=1500 True Az=54.87 Ze=115.125 Az status=0009 Ze status=0009 06:16:07 Check angles 06:16:07 SkyScan query 06:16:08 SkyScan query done: ret=0 az=40.875<-2725 ze=94.125<-5725 Statuses=0009 0009 06:16:08 Msec=2250 True Az=40.875 Ze=94.125 Az status=0009 Ze status=0009 06:16:08 Check angles 06:16:08 SkyScan query 06:16:09 SkyScan query done: ret=0 az=40.995<-2733 ze=73.185<-7121 Statuses=0008 0009 06:16:09 Msec=3000 True Az=40.995 Ze=73.185 Az status=0008 Ze status=0009 06:16:09 Check angles 06:16:09 SkyScan query 06:16:09 SkyScan query done: ret=0 az=40.995<-2733 ze=52.68<-8488 Statuses=0008 0009 06:16:09 Msec=3750 True Az=40.995 Ze=52.68 Az status=0008 Ze status=0009 06:16:10 Check angles 06:16:10 SkyScan query 06:16:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:16:10 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:16:10 Message to Master queued w/err=0: serial=55704 error=0 06:16:15 Received message from Master: op=Filter serial=55705 06:16:15 Color wheel filter change from 0 to 0 06:16:15 FLIGetFilterPos err=0 currentPosition=0 06:16:15 FLIGetStepsRemaining err=0 RemainingSteps=0 06:16:15 Filter is already there-color wheel unchanged 06:16:15 Received message from Master: op=Shutter serial=55706 06:16:15 Shutter LASER close 06:16:15 Received message from Camera: op=State serial=55708 06:16:15 GetSingleValue result=40 Value=cccccccc 06:16:15 SkyScan query 06:16:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:16:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:16 Parameters OK 06:16:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:16 Set A/D data flow result=40 06:16:16 Set A/D channel type result=40 06:16:16 Set A/D encoding result=40 06:16:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:16 Set channel filter=0.000000e+000 result=40 06:16:16 Config A/D Result=40 06:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:16 Get A/D filter: -9.255963e+061 result=40 06:16:16 Get A/D value=-858993460 result=40 06:16:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:16 Parameters OK 06:16:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:16 Set A/D data flow result=40 06:16:16 Set A/D channel type result=40 06:16:16 Set A/D encoding result=40 06:16:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:16 Set channel filter=0.000000e+000 result=40 06:16:16 Config A/D Result=40 06:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:16 Get A/D filter: -9.255963e+061 result=40 06:16:16 Get A/D value=-858993460 result=40 06:16:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:16:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:16:16 Aux= 06:16:16 Message to Camera, serial 55708 queued 06:16:53 Received message from Master: op=PointingHead serial=55721 06:16:53 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:16:53 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:16:53 Point started: ret=0 06:16:53 point_skyscan result=0 06:16:54 Check angles 06:16:54 SkyScan query 06:16:55 SkyScan query done: ret=0 az=63.96<-4264 ze=66.555<-7563 Statuses=0009 0008 06:16:55 Msec=0 True Az=63.96 Ze=66.555 Az status=0009 Ze status=0008 06:16:55 Check angles 06:16:55 SkyScan query 06:16:55 SkyScan query done: ret=0 az=81.345<-5423 ze=66.51<-7566 Statuses=0009 0008 06:16:55 Msec=750 True Az=81.345 Ze=66.51 Az status=0009 Ze status=0008 06:16:55 Check angles 06:16:55 SkyScan query 06:16:56 SkyScan query done: ret=0 az=98.91<-6594 ze=66.495<-7567 Statuses=0009 0008 06:16:56 Msec=1500 True Az=98.91 Ze=66.495 Az status=0009 Ze status=0008 06:16:56 Check angles 06:16:56 SkyScan query 06:16:57 SkyScan query done: ret=0 az=116.52<-7768 ze=66.495<-7567 Statuses=0009 0008 06:16:57 Msec=2250 True Az=116.52 Ze=66.495 Az status=0009 Ze status=0008 06:16:57 Check angles 06:16:57 SkyScan query 06:16:58 SkyScan query done: ret=0 az=134.04<-8936 ze=66.495<-7567 Statuses=0009 0008 06:16:58 Msec=3000 True Az=134.04 Ze=66.495 Az status=0009 Ze status=0008 06:16:58 Check angles 06:16:58 SkyScan query 06:16:58 SkyScan query done: ret=0 az=151.41<-10094 ze=66.495<-7567 Statuses=0009 0008 06:16:58 Msec=3750 True Az=151.41 Ze=66.495 Az status=0009 Ze status=0008 06:16:58 Check angles 06:16:58 SkyScan query 06:16:59 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:16:59 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 06:16:59 Message to Master queued w/err=0: serial=55721 error=0 06:17:04 Received message from Master: op=Filter serial=55722 06:17:04 Color wheel filter change from 0 to 0 06:17:04 FLIGetFilterPos err=0 currentPosition=0 06:17:04 FLIGetStepsRemaining err=0 RemainingSteps=0 06:17:04 Filter is already there-color wheel unchanged 06:17:04 Received message from Master: op=Shutter serial=55723 06:17:04 Shutter LASER close 06:17:04 Received message from Camera: op=State serial=55725 06:17:04 GetSingleValue result=40 Value=cccccccc 06:17:04 SkyScan query 06:17:05 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:17:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:05 Parameters OK 06:17:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:05 Set A/D data flow result=40 06:17:05 Set A/D channel type result=40 06:17:05 Set A/D encoding result=40 06:17:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:05 Set channel filter=0.000000e+000 result=40 06:17:05 Config A/D Result=40 06:17:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:05 Get A/D filter: -9.255963e+061 result=40 06:17:05 Get A/D value=-858993460 result=40 06:17:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:05 Parameters OK 06:17:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:05 Set A/D data flow result=40 06:17:05 Set A/D channel type result=40 06:17:05 Set A/D encoding result=40 06:17:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:05 Set channel filter=0.000000e+000 result=40 06:17:05 Config A/D Result=40 06:17:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:05 Get A/D filter: -9.255963e+061 result=40 06:17:05 Get A/D value=-858993460 result=40 06:17:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:05 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:17:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:17:05 Aux= 06:17:05 Message to Camera, serial 55725 queued 06:17:42 Received message from Master: op=PointingHead serial=55738 06:17:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:17:42 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:17:42 Point started: ret=0 06:17:42 point_skyscan result=0 06:17:43 Check angles 06:17:43 SkyScan query 06:17:43 SkyScan query done: ret=0 az=134.58<-8972 ze=36.285<-9581 Statuses=0009 0009 06:17:43 Msec=0 True Az=134.58 Ze=36.285 Az status=0009 Ze status=0009 06:17:44 Check angles 06:17:44 SkyScan query 06:17:44 SkyScan query done: ret=0 az=117.06<-7804 ze=15.345<-10977 Statuses=0009 0009 06:17:44 Msec=750 True Az=117.06 Ze=15.345 Az status=0009 Ze status=0009 06:17:44 Check angles 06:17:44 SkyScan query 06:17:45 SkyScan query done: ret=0 az=99.63<-6642 ze=-5.64<-12376 Statuses=0009 0009 06:17:45 Msec=1500 True Az=99.63 Ze=-5.64 Az status=0009 Ze status=0009 06:17:45 Check angles 06:17:45 SkyScan query 06:17:46 SkyScan query done: ret=0 az=82.215<-5481 ze=-26.58<-13772 Statuses=0009 0009 06:17:46 Msec=2250 True Az=82.215 Ze=-26.58 Az status=0009 Ze status=0009 06:17:46 Check angles 06:17:46 SkyScan query 06:17:46 SkyScan query done: ret=0 az=64.77<-4318 ze=-38.565<-14571 Statuses=0009 0008 06:17:46 Msec=3000 True Az=64.77 Ze=-38.565 Az status=0009 Ze status=0008 06:17:47 Check angles 06:17:47 SkyScan query 06:17:47 SkyScan query done: ret=0 az=47.325<-3155 ze=-38.535<-14569 Statuses=0009 0008 06:17:47 Msec=3750 True Az=47.325 Ze=-38.535 Az status=0009 Ze status=0008 06:17:47 Check angles 06:17:47 SkyScan query 06:17:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:17:48 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:17:48 Message to Master queued w/err=0: serial=55738 error=0 06:17:53 Received message from Master: op=Filter serial=55739 06:17:53 Color wheel filter change from 0 to 0 06:17:53 FLIGetFilterPos err=0 currentPosition=0 06:17:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:17:53 Filter is already there-color wheel unchanged 06:17:53 Received message from Master: op=Shutter serial=55740 06:17:53 Shutter LASER close 06:17:53 Received message from Camera: op=State serial=55742 06:17:53 GetSingleValue result=40 Value=cccccccc 06:17:53 SkyScan query 06:17:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:17:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:54 Parameters OK 06:17:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:54 Set A/D data flow result=40 06:17:54 Set A/D channel type result=40 06:17:54 Set A/D encoding result=40 06:17:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:54 Set channel filter=0.000000e+000 result=40 06:17:54 Config A/D Result=40 06:17:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:54 Get A/D filter: -9.255963e+061 result=40 06:17:54 Get A/D value=-858993460 result=40 06:17:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:54 Parameters OK 06:17:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:54 Set A/D data flow result=40 06:17:54 Set A/D channel type result=40 06:17:54 Set A/D encoding result=40 06:17:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:54 Set channel filter=0.000000e+000 result=40 06:17:54 Config A/D Result=40 06:17:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:54 Get A/D filter: -9.255963e+061 result=40 06:17:54 Get A/D value=-858993460 result=40 06:17:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:17:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:17:54 Aux= 06:17:54 Message to Camera, serial 55742 queued 06:18:31 Received message from Master: op=PointingHead serial=55755 06:18:31 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:18:31 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:18:31 Point started: ret=0 06:18:31 point_skyscan result=0 06:18:32 Check angles 06:18:32 SkyScan query 06:18:32 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.79<-16586 Statuses=0009 0009 06:18:32 Msec=0 True Az=64.425 Ze=-68.79 Az status=0009 Ze status=0009 06:18:32 Check angles 06:18:32 SkyScan query 06:18:33 SkyScan query done: ret=0 az=81.78<-5452 ze=-89.76<-17984 Statuses=0009 0009 06:18:33 Msec=750 True Az=81.78 Ze=-89.76 Az status=0009 Ze status=0009 06:18:33 Check angles 06:18:33 SkyScan query 06:18:34 SkyScan query done: ret=0 az=99.84<-6656 ze=-111.15<-19410 Statuses=0009 0009 06:18:34 Msec=1500 True Az=99.84 Ze=-111.15 Az status=0009 Ze status=0009 06:18:34 Check angles 06:18:34 SkyScan query 06:18:34 SkyScan query done: ret=0 az=117.345<-7823 ze=-132.045<-20803 Statuses=0009 0009 06:18:34 Msec=2250 True Az=117.345 Ze=-132.045 Az status=0009 Ze status=0009 06:18:35 Check angles 06:18:35 SkyScan query 06:18:35 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 06:18:35 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 06:18:35 Check angles 06:18:35 SkyScan query 06:18:36 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:18:36 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:18:36 Message to Master queued w/err=0: serial=55755 error=0 06:18:41 Received message from Master: op=Filter serial=55756 06:18:41 Color wheel filter change from 0 to 0 06:18:41 FLIGetFilterPos err=0 currentPosition=0 06:18:41 FLIGetStepsRemaining err=0 RemainingSteps=0 06:18:41 Filter is already there-color wheel unchanged 06:18:41 Received message from Master: op=Shutter serial=55757 06:18:41 Shutter LASER close 06:18:41 Received message from Camera: op=State serial=55759 06:18:41 GetSingleValue result=40 Value=cccccccc 06:18:41 SkyScan query 06:18:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:18:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:42 Parameters OK 06:18:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:42 Set A/D data flow result=40 06:18:42 Set A/D channel type result=40 06:18:42 Set A/D encoding result=40 06:18:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:42 Set channel filter=0.000000e+000 result=40 06:18:42 Config A/D Result=40 06:18:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:42 Get A/D filter: -9.255963e+061 result=40 06:18:42 Get A/D value=-858993460 result=40 06:18:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:42 Parameters OK 06:18:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:42 Set A/D data flow result=40 06:18:42 Set A/D channel type result=40 06:18:42 Set A/D encoding result=40 06:18:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:42 Set channel filter=0.000000e+000 result=40 06:18:42 Config A/D Result=40 06:18:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:42 Get A/D filter: -9.255963e+061 result=40 06:18:42 Get A/D value=-858993460 result=40 06:18:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:42 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:18:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:18:42 Aux= 06:18:42 Message to Camera, serial 55759 queued 06:19:19 Received message from Master: op=PointingHead serial=55772 06:19:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:19:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:19:19 Point started: ret=0 06:19:19 point_skyscan result=0 06:19:20 Check angles 06:19:20 SkyScan query 06:19:20 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.18<-23412 Statuses=0009 0009 06:19:20 Msec=0 True Az=113.01 Ze=-171.18 Az status=0009 Ze status=0009 06:19:21 Check angles 06:19:21 SkyScan query 06:19:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:19:21 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:19:21 Message to Master queued w/err=0: serial=55772 error=0 06:19:26 Received message from Master: op=Filter serial=55773 06:19:26 Color wheel filter change from 0 to 0 06:19:26 FLIGetFilterPos err=0 currentPosition=0 06:19:26 FLIGetStepsRemaining err=0 RemainingSteps=0 06:19:26 Filter is already there-color wheel unchanged 06:19:26 Received message from Master: op=Shutter serial=55774 06:19:26 Shutter LASER open 06:19:26 Received message from Camera: op=State serial=55776 06:19:26 GetSingleValue result=40 Value=cccccccc 06:19:26 SkyScan query 06:19:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:19:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:27 Parameters OK 06:19:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:27 Set A/D data flow result=40 06:19:27 Set A/D channel type result=40 06:19:27 Set A/D encoding result=40 06:19:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:27 Set channel filter=0.000000e+000 result=40 06:19:27 Config A/D Result=40 06:19:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:27 Get A/D filter: -9.255963e+061 result=40 06:19:27 Get A/D value=-858993460 result=40 06:19:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:27 Parameters OK 06:19:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:27 Set A/D data flow result=40 06:19:27 Set A/D channel type result=40 06:19:27 Set A/D encoding result=40 06:19:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:27 Set channel filter=0.000000e+000 result=40 06:19:27 Config A/D Result=40 06:19:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:27 Get A/D filter: -9.255963e+061 result=40 06:19:27 Get A/D value=-858993460 result=40 06:19:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:19:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:19:27 Aux= 06:19:27 Message to Camera, serial 55776 queued 06:19:35 Received message from Master: op=Shutter serial=55786 06:19:35 Shutter LASER close 06:19:36 Received message from Master: op=PointingHead serial=55790 06:19:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:19:36 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:19:36 Point started: ret=0 06:19:36 point_skyscan result=0 06:19:37 Check angles 06:19:37 SkyScan query 06:19:38 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.28<-21552 Statuses=0009 0009 06:19:38 Msec=0 True Az=135.945 Ze=-143.28 Az status=0009 Ze status=0009 06:19:38 Check angles 06:19:38 SkyScan query 06:19:39 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.875<-20125 Statuses=0009 0009 06:19:39 Msec=750 True Az=153.75 Ze=-121.875 Az status=0009 Ze status=0009 06:19:39 Check angles 06:19:39 SkyScan query 06:19:39 SkyScan query done: ret=0 az=171.24<-11416 ze=-100.92<-18728 Statuses=0009 0009 06:19:39 Msec=1500 True Az=171.24 Ze=-100.92 Az status=0009 Ze status=0009 06:19:39 Check angles 06:19:39 SkyScan query 06:19:40 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.01<-17334 Statuses=0008 0009 06:19:40 Msec=2250 True Az=176.025 Ze=-80.01 Az status=0008 Ze status=0009 06:19:40 Check angles 06:19:40 SkyScan query 06:19:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.025<-15935 Statuses=0008 0009 06:19:41 Msec=3000 True Az=175.995 Ze=-59.025 Az status=0008 Ze status=0009 06:19:41 Check angles 06:19:41 SkyScan query 06:19:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:19:42 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:19:42 Message to Master queued w/err=0: serial=55790 error=0 06:19:47 Received message from Master: op=Filter serial=55791 06:19:47 Color wheel filter change from 0 to 0 06:19:47 FLIGetFilterPos err=0 currentPosition=0 06:19:47 FLIGetStepsRemaining err=0 RemainingSteps=0 06:19:47 Filter is already there-color wheel unchanged 06:19:47 Received message from Master: op=Shutter serial=55792 06:19:47 Shutter LASER close 06:19:47 Received message from Camera: op=State serial=55794 06:19:47 GetSingleValue result=40 Value=cccccccc 06:19:47 SkyScan query 06:19:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:19:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:47 Parameters OK 06:19:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:47 Set A/D data flow result=40 06:19:47 Set A/D channel type result=40 06:19:47 Set A/D encoding result=40 06:19:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:47 Set channel filter=0.000000e+000 result=40 06:19:47 Config A/D Result=40 06:19:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:47 Get A/D filter: -9.255963e+061 result=40 06:19:47 Get A/D value=-858993460 result=40 06:19:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:47 Parameters OK 06:19:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:47 Set A/D data flow result=40 06:19:47 Set A/D channel type result=40 06:19:47 Set A/D encoding result=40 06:19:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:47 Set channel filter=0.000000e+000 result=40 06:19:47 Config A/D Result=40 06:19:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:47 Get A/D filter: -9.255963e+061 result=40 06:19:47 Get A/D value=-858993460 result=40 06:19:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:19:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:19:47 Aux= 06:19:47 Message to Camera, serial 55794 queued 06:20:24 Received message from Master: op=PointingHead serial=55807 06:20:24 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:20:24 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:20:25 Point started: ret=0 06:20:25 point_skyscan result=0 06:20:25 Check angles 06:20:25 SkyScan query 06:20:26 SkyScan query done: ret=0 az=152.64<-10176 ze=-21.405<-13427 Statuses=0009 0009 06:20:26 Msec=0 True Az=152.64 Ze=-21.405 Az status=0009 Ze status=0009 06:20:26 Check angles 06:20:26 SkyScan query 06:20:27 SkyScan query done: ret=0 az=135.165<-9011 ze=-0.435<-12029 Statuses=0009 0009 06:20:27 Msec=750 True Az=135.165 Ze=-0.435 Az status=0009 Ze status=0009 06:20:27 Check angles 06:20:27 SkyScan query 06:20:27 SkyScan query done: ret=0 az=117.09<-7806 ze=20.97<-10602 Statuses=0009 0009 06:20:27 Msec=1500 True Az=117.09 Ze=20.97 Az status=0009 Ze status=0009 06:20:28 Check angles 06:20:28 SkyScan query 06:20:28 SkyScan query done: ret=0 az=99.9<-6660 ze=41.925<-9205 Statuses=0009 0009 06:20:28 Msec=2250 True Az=99.9 Ze=41.925 Az status=0009 Ze status=0009 06:20:28 Check angles 06:20:28 SkyScan query 06:20:29 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 06:20:29 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 06:20:29 Check angles 06:20:29 SkyScan query 06:20:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:20:30 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:20:30 Message to Master queued w/err=0: serial=55807 error=0 06:20:35 Received message from Master: op=Filter serial=55808 06:20:35 Color wheel filter change from 0 to 0 06:20:35 FLIGetFilterPos err=0 currentPosition=0 06:20:35 FLIGetStepsRemaining err=0 RemainingSteps=0 06:20:35 Filter is already there-color wheel unchanged 06:20:35 Received message from Master: op=Shutter serial=55809 06:20:35 Shutter LASER close 06:20:35 Received message from Camera: op=State serial=55811 06:20:35 GetSingleValue result=40 Value=cccccccc 06:20:35 SkyScan query 06:20:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:20:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:36 Parameters OK 06:20:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:36 Set A/D data flow result=40 06:20:36 Set A/D channel type result=40 06:20:36 Set A/D encoding result=40 06:20:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:36 Set channel filter=0.000000e+000 result=40 06:20:36 Config A/D Result=40 06:20:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:36 Get A/D filter: -9.255963e+061 result=40 06:20:36 Get A/D value=-858993460 result=40 06:20:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:36 Parameters OK 06:20:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:36 Set A/D data flow result=40 06:20:36 Set A/D channel type result=40 06:20:36 Set A/D encoding result=40 06:20:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:36 Set channel filter=0.000000e+000 result=40 06:20:36 Config A/D Result=40 06:20:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:36 Get A/D filter: -9.255963e+061 result=40 06:20:36 Get A/D value=-858993460 result=40 06:20:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:20:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:20:36 Aux= 06:20:36 Message to Camera, serial 55811 queued 06:21:12 Received message from Master: op=PointingHead serial=55824 06:21:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:21:12 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:21:13 Point started: ret=0 06:21:13 point_skyscan result=0 06:21:13 Check angles 06:21:13 SkyScan query 06:21:14 SkyScan query done: ret=0 az=108.915<-7261 ze=38.49<-9434 Statuses=0009 0008 06:21:14 Msec=0 True Az=108.915 Ze=38.49 Az status=0009 Ze status=0008 06:21:14 Check angles 06:21:14 SkyScan query 06:21:15 SkyScan query done: ret=0 az=126.48<-8432 ze=38.505<-9433 Statuses=0009 0008 06:21:15 Msec=750 True Az=126.48 Ze=38.505 Az status=0009 Ze status=0008 06:21:15 Check angles 06:21:15 SkyScan query 06:21:16 SkyScan query done: ret=0 az=143.925<-9595 ze=38.505<-9433 Statuses=0009 0008 06:21:16 Msec=1500 True Az=143.925 Ze=38.505 Az status=0009 Ze status=0008 06:21:16 Check angles 06:21:16 SkyScan query 06:21:16 SkyScan query done: ret=0 az=161.325<-10755 ze=38.505<-9433 Statuses=0009 0008 06:21:16 Msec=2250 True Az=161.325 Ze=38.505 Az status=0009 Ze status=0008 06:21:16 Check angles 06:21:16 SkyScan query 06:21:17 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 06:21:17 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 06:21:17 Check angles 06:21:17 SkyScan query 06:21:18 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:21:18 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:21:18 Message to Master queued w/err=0: serial=55824 error=0 06:21:23 Received message from Master: op=Filter serial=55825 06:21:23 Color wheel filter change from 0 to 0 06:21:23 FLIGetFilterPos err=0 currentPosition=0 06:21:23 FLIGetStepsRemaining err=0 RemainingSteps=0 06:21:23 Filter is already there-color wheel unchanged 06:21:23 Received message from Master: op=Shutter serial=55826 06:21:23 Shutter LASER close 06:21:23 Received message from Camera: op=State serial=55828 06:21:23 GetSingleValue result=40 Value=cccccccc 06:21:23 SkyScan query 06:21:24 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:21:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:24 Parameters OK 06:21:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:24 Set A/D data flow result=40 06:21:24 Set A/D channel type result=40 06:21:24 Set A/D encoding result=40 06:21:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:24 Set channel filter=0.000000e+000 result=40 06:21:24 Config A/D Result=40 06:21:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:24 Get A/D filter: -9.255963e+061 result=40 06:21:24 Get A/D value=-858993460 result=40 06:21:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:24 Parameters OK 06:21:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:24 Set A/D data flow result=40 06:21:24 Set A/D channel type result=40 06:21:24 Set A/D encoding result=40 06:21:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:24 Set channel filter=0.000000e+000 result=40 06:21:24 Config A/D Result=40 06:21:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:24 Get A/D filter: -9.255963e+061 result=40 06:21:24 Get A/D value=-858993460 result=40 06:21:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:21:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:21:24 Aux= 06:21:24 Message to Camera, serial 55828 queued 06:22:00 Received message from Master: op=PointingHead serial=55841 06:22:00 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:22:00 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:22:01 Point started: ret=0 06:22:01 point_skyscan result=0 06:22:02 Check angles 06:22:02 SkyScan query 06:22:02 SkyScan query done: ret=0 az=153.12<-10208 ze=8.85<-11410 Statuses=0009 0009 06:22:02 Msec=0 True Az=153.12 Ze=8.85 Az status=0009 Ze status=0009 06:22:02 Check angles 06:22:02 SkyScan query 06:22:03 SkyScan query done: ret=0 az=135.735<-9049 ze=-12.135<-12809 Statuses=0009 0009 06:22:03 Msec=750 True Az=135.735 Ze=-12.135 Az status=0009 Ze status=0009 06:22:03 Check angles 06:22:03 SkyScan query 06:22:04 SkyScan query done: ret=0 az=118.11<-7874 ze=-33.135<-14209 Statuses=0009 0009 06:22:04 Msec=1500 True Az=118.11 Ze=-33.135 Az status=0009 Ze status=0009 06:22:04 Check angles 06:22:04 SkyScan query 06:22:04 SkyScan query done: ret=0 az=100.575<-6705 ze=-51.51<-15434 Statuses=0009 0009 06:22:04 Msec=2250 True Az=100.575 Ze=-51.51 Az status=0009 Ze status=0009 06:22:05 Check angles 06:22:05 SkyScan query 06:22:05 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 06:22:05 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 06:22:05 Check angles 06:22:05 SkyScan query 06:22:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:22:06 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:22:06 Message to Master queued w/err=0: serial=55841 error=0 06:22:11 Received message from Master: op=Filter serial=55842 06:22:11 Color wheel filter change from 0 to 0 06:22:11 FLIGetFilterPos err=0 currentPosition=0 06:22:11 FLIGetStepsRemaining err=0 RemainingSteps=0 06:22:11 Filter is already there-color wheel unchanged 06:22:11 Received message from Master: op=Shutter serial=55843 06:22:11 Shutter LASER close 06:22:11 Received message from Camera: op=State serial=55845 06:22:11 GetSingleValue result=40 Value=cccccccc 06:22:11 SkyScan query 06:22:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:22:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:12 Parameters OK 06:22:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:12 Set A/D data flow result=40 06:22:12 Set A/D channel type result=40 06:22:12 Set A/D encoding result=40 06:22:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:12 Set channel filter=0.000000e+000 result=40 06:22:12 Config A/D Result=40 06:22:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:12 Get A/D filter: -9.255963e+061 result=40 06:22:12 Get A/D value=-858993460 result=40 06:22:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:12 Parameters OK 06:22:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:12 Set A/D data flow result=40 06:22:12 Set A/D channel type result=40 06:22:12 Set A/D encoding result=40 06:22:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:12 Set channel filter=0.000000e+000 result=40 06:22:12 Config A/D Result=40 06:22:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:12 Get A/D filter: -9.255963e+061 result=40 06:22:12 Get A/D value=-858993460 result=40 06:22:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:22:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:22:12 Aux= 06:22:12 Message to Camera, serial 55845 queued 06:22:48 Received message from Master: op=PointingHead serial=55858 06:22:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:22:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:22:49 Point started: ret=0 06:22:49 point_skyscan result=0 06:22:50 Check angles 06:22:50 SkyScan query 06:22:50 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.225<-17415 Statuses=0009 0009 06:22:50 Msec=0 True Az=108.93 Ze=-81.225 Az status=0009 Ze status=0009 06:22:50 Check angles 06:22:50 SkyScan query 06:22:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.195<-18813 Statuses=0008 0009 06:22:51 Msec=750 True Az=112.995 Ze=-102.195 Az status=0008 Ze status=0009 06:22:51 Check angles 06:22:51 SkyScan query 06:22:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.15<-20210 Statuses=0008 0009 06:22:52 Msec=1500 True Az=112.995 Ze=-123.15 Az status=0008 Ze status=0009 06:22:52 Check angles 06:22:52 SkyScan query 06:22:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.525<-21635 Statuses=0008 0009 06:22:52 Msec=2250 True Az=112.995 Ze=-144.525 Az status=0008 Ze status=0009 06:22:53 Check angles 06:22:53 SkyScan query 06:22:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.48<-23032 Statuses=0008 0009 06:22:53 Msec=3000 True Az=112.995 Ze=-165.48 Az status=0008 Ze status=0009 06:22:53 Check angles 06:22:53 SkyScan query 06:22:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:22:54 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:22:54 Message to Master queued w/err=0: serial=55858 error=0 06:22:59 Received message from Master: op=Filter serial=55859 06:22:59 Color wheel filter change from 0 to 0 06:22:59 FLIGetFilterPos err=0 currentPosition=0 06:22:59 FLIGetStepsRemaining err=0 RemainingSteps=0 06:22:59 Filter is already there-color wheel unchanged 06:22:59 Received message from Master: op=Shutter serial=55860 06:22:59 Shutter LASER open 06:22:59 Received message from Camera: op=State serial=55862 06:22:59 GetSingleValue result=40 Value=cccccccc 06:22:59 SkyScan query 06:23:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:23:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:00 Parameters OK 06:23:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:00 Set A/D data flow result=40 06:23:00 Set A/D channel type result=40 06:23:00 Set A/D encoding result=40 06:23:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:00 Set channel filter=0.000000e+000 result=40 06:23:00 Config A/D Result=40 06:23:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:00 Get A/D filter: -9.255963e+061 result=40 06:23:00 Get A/D value=-858993460 result=40 06:23:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:00 Parameters OK 06:23:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:00 Set A/D data flow result=40 06:23:00 Set A/D channel type result=40 06:23:00 Set A/D encoding result=40 06:23:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:00 Set channel filter=0.000000e+000 result=40 06:23:00 Config A/D Result=40 06:23:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:00 Get A/D filter: -9.255963e+061 result=40 06:23:00 Get A/D value=-858993460 result=40 06:23:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:23:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:23:00 Aux= 06:23:00 Message to Camera, serial 55862 queued 06:23:08 Received message from Master: op=Shutter serial=55872 06:23:08 Shutter LASER close 06:23:09 Received message from Master: op=PointingHead serial=55876 06:23:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:23:09 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:23:09 Point started: ret=0 06:23:09 point_skyscan result=0 06:23:10 Check angles 06:23:10 SkyScan query 06:23:10 SkyScan query done: ret=0 az=89.895<-5993 ze=157.245<-1517 Statuses=0009 0009 06:23:10 Msec=0 True Az=89.895 Ze=157.245 Az status=0009 Ze status=0009 06:23:11 Check angles 06:23:11 SkyScan query 06:23:11 SkyScan query done: ret=0 az=72.015<-4801 ze=135.825<-2945 Statuses=0009 0009 06:23:11 Msec=750 True Az=72.015 Ze=135.825 Az status=0009 Ze status=0009 06:23:11 Check angles 06:23:11 SkyScan query 06:23:12 SkyScan query done: ret=0 az=54.72<-3648 ze=114.9<-4340 Statuses=0009 0009 06:23:12 Msec=1500 True Az=54.72 Ze=114.9 Az status=0009 Ze status=0009 06:23:12 Check angles 06:23:12 SkyScan query 06:23:13 SkyScan query done: ret=0 az=40.89<-2726 ze=93.915<-5739 Statuses=0009 0009 06:23:13 Msec=2250 True Az=40.89 Ze=93.915 Az status=0009 Ze status=0009 06:23:13 Check angles 06:23:13 SkyScan query 06:23:13 SkyScan query done: ret=0 az=40.995<-2733 ze=72.975<-7135 Statuses=0008 0009 06:23:13 Msec=3000 True Az=40.995 Ze=72.975 Az status=0008 Ze status=0009 06:23:14 Check angles 06:23:14 SkyScan query 06:23:14 SkyScan query done: ret=0 az=40.995<-2733 ze=52.545<-8497 Statuses=0008 0009 06:23:14 Msec=3750 True Az=40.995 Ze=52.545 Az status=0008 Ze status=0009 06:23:14 Check angles 06:23:14 SkyScan query 06:23:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:23:15 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:23:15 Message to Master queued w/err=0: serial=55876 error=0 06:23:20 Received message from Master: op=Filter serial=55877 06:23:20 Color wheel filter change from 0 to 0 06:23:20 FLIGetFilterPos err=0 currentPosition=0 06:23:20 FLIGetStepsRemaining err=0 RemainingSteps=0 06:23:20 Filter is already there-color wheel unchanged 06:23:20 Received message from Master: op=Shutter serial=55878 06:23:20 Shutter LASER close 06:23:20 Received message from Camera: op=State serial=55880 06:23:20 GetSingleValue result=40 Value=cccccccc 06:23:20 SkyScan query 06:23:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:23:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:21 Parameters OK 06:23:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:21 Set A/D data flow result=40 06:23:21 Set A/D channel type result=40 06:23:21 Set A/D encoding result=40 06:23:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:21 Set channel filter=0.000000e+000 result=40 06:23:21 Config A/D Result=40 06:23:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:21 Get A/D filter: -9.255963e+061 result=40 06:23:21 Get A/D value=-858993460 result=40 06:23:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:21 Parameters OK 06:23:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:21 Set A/D data flow result=40 06:23:21 Set A/D channel type result=40 06:23:21 Set A/D encoding result=40 06:23:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:21 Set channel filter=0.000000e+000 result=40 06:23:21 Config A/D Result=40 06:23:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:21 Get A/D filter: -9.255963e+061 result=40 06:23:21 Get A/D value=-858993460 result=40 06:23:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:23:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:23:21 Aux= 06:23:21 Message to Camera, serial 55880 queued 06:23:57 Received message from Master: op=PointingHead serial=55892 06:23:57 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:23:57 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:23:57 Point started: ret=0 06:23:57 point_skyscan result=0 06:23:58 Check angles 06:23:58 SkyScan query 06:23:58 SkyScan query done: ret=0 az=63.765<-4251 ze=66.555<-7563 Statuses=0009 0008 06:23:58 Msec=0 True Az=63.765 Ze=66.555 Az status=0009 Ze status=0008 06:23:59 Check angles 06:23:59 SkyScan query 06:23:59 SkyScan query done: ret=0 az=81.18<-5412 ze=66.51<-7566 Statuses=0009 0008 06:23:59 Msec=750 True Az=81.18 Ze=66.51 Az status=0009 Ze status=0008 06:23:59 Check angles 06:23:59 SkyScan query 06:24:00 SkyScan query done: ret=0 az=98.7<-6580 ze=66.495<-7567 Statuses=0009 0008 06:24:00 Msec=1500 True Az=98.7 Ze=66.495 Az status=0009 Ze status=0008 06:24:00 Check angles 06:24:00 SkyScan query 06:24:01 SkyScan query done: ret=0 az=116.34<-7756 ze=66.495<-7567 Statuses=0009 0008 06:24:01 Msec=2250 True Az=116.34 Ze=66.495 Az status=0009 Ze status=0008 06:24:01 Check angles 06:24:01 SkyScan query 06:24:01 SkyScan query done: ret=0 az=133.83<-8922 ze=66.495<-7567 Statuses=0009 0008 06:24:01 Msec=3000 True Az=133.83 Ze=66.495 Az status=0009 Ze status=0008 06:24:02 Check angles 06:24:02 SkyScan query 06:24:02 SkyScan query done: ret=0 az=151.215<-10081 ze=66.495<-7567 Statuses=0009 0008 06:24:02 Msec=3750 True Az=151.215 Ze=66.495 Az status=0009 Ze status=0008 06:24:02 Check angles 06:24:02 SkyScan query 06:24:03 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:24:03 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 06:24:03 Message to Master queued w/err=0: serial=55892 error=0 06:24:08 Received message from Master: op=Filter serial=55893 06:24:08 Color wheel filter change from 0 to 0 06:24:08 FLIGetFilterPos err=0 currentPosition=0 06:24:08 FLIGetStepsRemaining err=0 RemainingSteps=0 06:24:08 Filter is already there-color wheel unchanged 06:24:08 Received message from Master: op=Shutter serial=55894 06:24:08 Shutter LASER close 06:24:08 Received message from Camera: op=State serial=55896 06:24:08 GetSingleValue result=40 Value=cccccccc 06:24:08 SkyScan query 06:24:09 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:24:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:09 Parameters OK 06:24:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:09 Set A/D data flow result=40 06:24:09 Set A/D channel type result=40 06:24:09 Set A/D encoding result=40 06:24:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:09 Set channel filter=0.000000e+000 result=40 06:24:09 Config A/D Result=40 06:24:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:09 Get A/D filter: -9.255963e+061 result=40 06:24:09 Get A/D value=-858993460 result=40 06:24:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:09 Parameters OK 06:24:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:09 Set A/D data flow result=40 06:24:09 Set A/D channel type result=40 06:24:09 Set A/D encoding result=40 06:24:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:09 Set channel filter=0.000000e+000 result=40 06:24:09 Config A/D Result=40 06:24:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:09 Get A/D filter: -9.255963e+061 result=40 06:24:09 Get A/D value=-858993460 result=40 06:24:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:09 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:24:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:24:09 Aux= 06:24:09 Message to Camera, serial 55896 queued 06:24:46 Received message from Master: op=PointingHead serial=55909 06:24:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:24:46 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:24:46 Point started: ret=0 06:24:46 point_skyscan result=0 06:24:47 Check angles 06:24:47 SkyScan query 06:24:47 SkyScan query done: ret=0 az=134.82<-8988 ze=36.6<-9560 Statuses=0009 0009 06:24:47 Msec=0 True Az=134.82 Ze=36.6 Az status=0009 Ze status=0009 06:24:47 Check angles 06:24:47 SkyScan query 06:24:48 SkyScan query done: ret=0 az=117.405<-7827 ze=15.69<-10954 Statuses=0009 0009 06:24:48 Msec=750 True Az=117.405 Ze=15.69 Az status=0009 Ze status=0009 06:24:48 Check angles 06:24:48 SkyScan query 06:24:49 SkyScan query done: ret=0 az=100.005<-6667 ze=-5.31<-12354 Statuses=0009 0009 06:24:49 Msec=1500 True Az=100.005 Ze=-5.31 Az status=0009 Ze status=0009 06:24:49 Check angles 06:24:49 SkyScan query 06:24:49 SkyScan query done: ret=0 az=82.44<-5496 ze=-26.22<-13748 Statuses=0009 0009 06:24:49 Msec=2250 True Az=82.44 Ze=-26.22 Az status=0009 Ze status=0009 06:24:50 Check angles 06:24:50 SkyScan query 06:24:50 SkyScan query done: ret=0 az=65.01<-4334 ze=-38.58<-14572 Statuses=0009 0008 06:24:50 Msec=3000 True Az=65.01 Ze=-38.58 Az status=0009 Ze status=0008 06:24:50 Check angles 06:24:50 SkyScan query 06:24:51 SkyScan query done: ret=0 az=47.625<-3175 ze=-38.52<-14568 Statuses=0009 0008 06:24:51 Msec=3750 True Az=47.625 Ze=-38.52 Az status=0009 Ze status=0008 06:24:51 Check angles 06:24:51 SkyScan query 06:24:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:24:52 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:24:52 Message to Master queued w/err=0: serial=55909 error=0 06:24:57 Received message from Master: op=Filter serial=55910 06:24:57 Color wheel filter change from 0 to 0 06:24:57 FLIGetFilterPos err=0 currentPosition=0 06:24:57 FLIGetStepsRemaining err=0 RemainingSteps=0 06:24:57 Filter is already there-color wheel unchanged 06:24:57 Received message from Master: op=Shutter serial=55911 06:24:57 Shutter LASER close 06:24:57 Received message from Camera: op=State serial=55913 06:24:57 GetSingleValue result=40 Value=cccccccc 06:24:57 SkyScan query 06:24:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:24:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:58 Parameters OK 06:24:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:58 Set A/D data flow result=40 06:24:58 Set A/D channel type result=40 06:24:58 Set A/D encoding result=40 06:24:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:58 Set channel filter=0.000000e+000 result=40 06:24:58 Config A/D Result=40 06:24:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:58 Get A/D filter: -9.255963e+061 result=40 06:24:58 Get A/D value=-858993460 result=40 06:24:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:58 Parameters OK 06:24:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:58 Set A/D data flow result=40 06:24:58 Set A/D channel type result=40 06:24:58 Set A/D encoding result=40 06:24:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:58 Set channel filter=0.000000e+000 result=40 06:24:58 Config A/D Result=40 06:24:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:58 Get A/D filter: -9.255963e+061 result=40 06:24:58 Get A/D value=-858993460 result=40 06:24:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:24:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:24:58 Aux= 06:24:58 Message to Camera, serial 55913 queued 06:25:34 Received message from Master: op=PointingHead serial=55926 06:25:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:25:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:25:35 Point started: ret=0 06:25:35 point_skyscan result=0 06:25:35 Check angles 06:25:35 SkyScan query 06:25:36 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.67<-16578 Statuses=0009 0009 06:25:36 Msec=0 True Az=64.215 Ze=-68.67 Az status=0009 Ze status=0009 06:25:36 Check angles 06:25:36 SkyScan query 06:25:37 SkyScan query done: ret=0 az=82.26<-5484 ze=-90.06<-18004 Statuses=0009 0009 06:25:37 Msec=750 True Az=82.26 Ze=-90.06 Az status=0009 Ze status=0009 06:25:37 Check angles 06:25:37 SkyScan query 06:25:38 SkyScan query done: ret=0 az=99.66<-6644 ze=-110.985<-19399 Statuses=0009 0009 06:25:38 Msec=1500 True Az=99.66 Ze=-110.985 Az status=0009 Ze status=0009 06:25:38 Check angles 06:25:38 SkyScan query 06:25:38 SkyScan query done: ret=0 az=117.165<-7811 ze=-131.94<-20796 Statuses=0009 0009 06:25:38 Msec=2250 True Az=117.165 Ze=-131.94 Az status=0009 Ze status=0009 [UTC 2018-12-11 06:25:38] 06:25:38 Check angles 06:25:39 SkyScan query 06:25:39 SkyScan query done: ret=0 az=130.95<-8730 ze=-141.54<-21436 Statuses=0009 0008 06:25:39 Msec=3000 True Az=130.95 Ze=-141.54 Az status=0009 Ze status=0008 06:25:39 Check angles 06:25:39 SkyScan query 06:25:40 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 06:25:40 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 06:25:40 Message to Master queued w/err=0: serial=55926 error=0 06:25:45 Received message from Master: op=Filter serial=55927 06:25:45 Color wheel filter change from 0 to 0 06:25:45 FLIGetFilterPos err=0 currentPosition=0 06:25:45 FLIGetStepsRemaining err=0 RemainingSteps=0 06:25:45 Filter is already there-color wheel unchanged 06:25:45 Received message from Master: op=Shutter serial=55928 06:25:45 Shutter LASER close 06:25:45 Received message from Camera: op=State serial=55930 06:25:45 GetSingleValue result=40 Value=cccccccc 06:25:45 SkyScan query 06:25:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:25:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:46 Parameters OK 06:25:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:46 Set A/D data flow result=40 06:25:46 Set A/D channel type result=40 06:25:46 Set A/D encoding result=40 06:25:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:46 Set channel filter=0.000000e+000 result=40 06:25:46 Config A/D Result=40 06:25:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:46 Get A/D filter: -9.255963e+061 result=40 06:25:46 Get A/D value=-858993460 result=40 06:25:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:46 Parameters OK 06:25:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:46 Set A/D data flow result=40 06:25:46 Set A/D channel type result=40 06:25:46 Set A/D encoding result=40 06:25:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:46 Set channel filter=0.000000e+000 result=40 06:25:46 Config A/D Result=40 06:25:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:46 Get A/D filter: -9.255963e+061 result=40 06:25:46 Get A/D value=-858993460 result=40 06:25:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:46 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:25:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:25:46 Aux= 06:25:46 Message to Camera, serial 55930 queued 06:26:22 Received message from Master: op=PointingHead serial=55943 06:26:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:26:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:26:23 Point started: ret=0 06:26:23 point_skyscan result=0 06:26:24 Check angles 06:26:24 SkyScan query 06:26:24 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.135<-23409 Statuses=0009 0009 06:26:24 Msec=0 True Az=113.01 Ze=-171.135 Az status=0009 Ze status=0009 06:26:24 Check angles 06:26:24 SkyScan query 06:26:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:26:25 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:26:25 Message to Master queued w/err=0: serial=55943 error=0 06:26:30 Received message from Master: op=Filter serial=55944 06:26:30 Color wheel filter change from 0 to 0 06:26:30 FLIGetFilterPos err=0 currentPosition=0 06:26:30 FLIGetStepsRemaining err=0 RemainingSteps=0 06:26:30 Filter is already there-color wheel unchanged 06:26:30 Received message from Master: op=Shutter serial=55945 06:26:30 Shutter LASER open 06:26:30 Received message from Camera: op=State serial=55947 06:26:30 GetSingleValue result=40 Value=cccccccc 06:26:30 SkyScan query 06:26:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:26:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:31 Parameters OK 06:26:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:31 Set A/D data flow result=40 06:26:31 Set A/D channel type result=40 06:26:31 Set A/D encoding result=40 06:26:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:31 Set channel filter=0.000000e+000 result=40 06:26:31 Config A/D Result=40 06:26:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:31 Get A/D filter: -9.255963e+061 result=40 06:26:31 Get A/D value=-858993460 result=40 06:26:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:31 Parameters OK 06:26:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:31 Set A/D data flow result=40 06:26:31 Set A/D channel type result=40 06:26:31 Set A/D encoding result=40 06:26:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:31 Set channel filter=0.000000e+000 result=40 06:26:31 Config A/D Result=40 06:26:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:31 Get A/D filter: -9.255963e+061 result=40 06:26:31 Get A/D value=-858993460 result=40 06:26:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:26:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:26:31 Aux= 06:26:31 Message to Camera, serial 55947 queued 06:26:39 Received message from Master: op=Shutter serial=55957 06:26:39 Shutter LASER close 06:26:40 Received message from Master: op=PointingHead serial=55961 06:26:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:26:40 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:26:40 Point started: ret=0 06:26:40 point_skyscan result=0 06:26:41 Check angles 06:26:41 SkyScan query 06:26:42 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.77<-21518 Statuses=0009 0009 06:26:42 Msec=0 True Az=136.35 Ze=-142.77 Az status=0009 Ze status=0009 06:26:42 Check angles 06:26:42 SkyScan query 06:26:42 SkyScan query done: ret=0 az=153.885<-10259 ze=-121.815<-20121 Statuses=0009 0009 06:26:42 Msec=750 True Az=153.885 Ze=-121.815 Az status=0009 Ze status=0009 06:26:42 Check angles 06:26:42 SkyScan query 06:26:43 SkyScan query done: ret=0 az=171.27<-11418 ze=-100.86<-18724 Statuses=0009 0009 06:26:43 Msec=1500 True Az=171.27 Ze=-100.86 Az status=0009 Ze status=0009 06:26:43 Check angles 06:26:43 SkyScan query 06:26:44 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.935<-17329 Statuses=0008 0009 06:26:44 Msec=2250 True Az=176.025 Ze=-79.935 Az status=0008 Ze status=0009 06:26:44 Check angles 06:26:44 SkyScan query 06:26:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.95<-15930 Statuses=0008 0009 06:26:45 Msec=3000 True Az=175.995 Ze=-58.95 Az status=0008 Ze status=0009 06:26:45 Check angles 06:26:45 SkyScan query 06:26:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 06:26:45 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 06:26:45 Message to Master queued w/err=0: serial=55961 error=0 06:26:50 Received message from Master: op=Filter serial=55962 06:26:50 Color wheel filter change from 0 to 0 06:26:50 FLIGetFilterPos err=0 currentPosition=0 06:26:50 FLIGetStepsRemaining err=0 RemainingSteps=0 06:26:50 Filter is already there-color wheel unchanged 06:26:50 Received message from Master: op=Shutter serial=55963 06:26:50 Shutter LASER close 06:26:51 Received message from Camera: op=State serial=55965 06:26:51 GetSingleValue result=40 Value=cccccccc 06:26:51 SkyScan query 06:26:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:26:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:51 Parameters OK 06:26:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:51 Set A/D data flow result=40 06:26:51 Set A/D channel type result=40 06:26:51 Set A/D encoding result=40 06:26:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:51 Set channel filter=0.000000e+000 result=40 06:26:51 Config A/D Result=40 06:26:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:51 Get A/D filter: -9.255963e+061 result=40 06:26:51 Get A/D value=-858993460 result=40 06:26:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:51 Parameters OK 06:26:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:51 Set A/D data flow result=40 06:26:51 Set A/D channel type result=40 06:26:51 Set A/D encoding result=40 06:26:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:51 Set channel filter=0.000000e+000 result=40 06:26:51 Config A/D Result=40 06:26:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:51 Get A/D filter: -9.255963e+061 result=40 06:26:51 Get A/D value=-858993460 result=40 06:26:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:26:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:26:51 Aux= 06:26:51 Message to Camera, serial 55965 queued 06:27:28 Received message from Master: op=PointingHead serial=55978 06:27:28 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:27:28 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:27:28 Point started: ret=0 06:27:28 point_skyscan result=0 06:27:29 Check angles 06:27:29 SkyScan query 06:27:30 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.9<-13460 Statuses=0009 0009 06:27:30 Msec=0 True Az=152.97 Ze=-21.9 Az status=0009 Ze status=0009 06:27:30 Check angles 06:27:30 SkyScan query 06:27:30 SkyScan query done: ret=0 az=135.705<-9047 ze=-0.87<-12058 Statuses=0009 0009 06:27:30 Msec=750 True Az=135.705 Ze=-0.87 Az status=0009 Ze status=0009 06:27:31 Check angles 06:27:31 SkyScan query 06:27:31 SkyScan query done: ret=0 az=118.065<-7871 ze=20.04<-10664 Statuses=0009 0009 06:27:31 Msec=1500 True Az=118.065 Ze=20.04 Az status=0009 Ze status=0009 06:27:31 Check angles 06:27:31 SkyScan query 06:27:32 SkyScan query done: ret=0 az=100.56<-6704 ze=41.055<-9263 Statuses=0009 0009 06:27:32 Msec=2250 True Az=100.56 Ze=41.055 Az status=0009 Ze status=0009 06:27:32 Check angles 06:27:32 SkyScan query 06:27:33 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 06:27:33 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 06:27:33 Check angles 06:27:33 SkyScan query 06:27:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:27:33 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:27:33 Message to Master queued w/err=0: serial=55978 error=0 06:27:38 Received message from Master: op=Filter serial=55979 06:27:38 Color wheel filter change from 0 to 0 06:27:38 FLIGetFilterPos err=0 currentPosition=0 06:27:38 FLIGetStepsRemaining err=0 RemainingSteps=0 06:27:38 Filter is already there-color wheel unchanged 06:27:39 Received message from Master: op=Shutter serial=55980 06:27:39 Shutter LASER close 06:27:39 Received message from Camera: op=State serial=55982 06:27:39 GetSingleValue result=40 Value=cccccccc 06:27:39 SkyScan query 06:27:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:27:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:39 Parameters OK 06:27:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:39 Set A/D data flow result=40 06:27:39 Set A/D channel type result=40 06:27:39 Set A/D encoding result=40 06:27:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:39 Set channel filter=0.000000e+000 result=40 06:27:39 Config A/D Result=40 06:27:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:39 Get A/D filter: -9.255963e+061 result=40 06:27:39 Get A/D value=-858993460 result=40 06:27:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:39 Parameters OK 06:27:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:39 Set A/D data flow result=40 06:27:39 Set A/D channel type result=40 06:27:39 Set A/D encoding result=40 06:27:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:39 Set channel filter=0.000000e+000 result=40 06:27:39 Config A/D Result=40 06:27:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:39 Get A/D filter: -9.255963e+061 result=40 06:27:39 Get A/D value=-858993460 result=40 06:27:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:27:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:27:39 Aux= 06:27:39 Message to Camera, serial 55982 queued 06:28:16 Received message from Master: op=PointingHead serial=55995 06:28:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:28:16 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:28:16 Point started: ret=0 06:28:16 point_skyscan result=0 06:28:17 Check angles 06:28:17 SkyScan query 06:28:18 SkyScan query done: ret=0 az=109.065<-7271 ze=38.49<-9434 Statuses=0009 0008 06:28:18 Msec=0 True Az=109.065 Ze=38.49 Az status=0009 Ze status=0008 06:28:18 Check angles 06:28:18 SkyScan query 06:28:19 SkyScan query done: ret=0 az=126.9<-8460 ze=38.505<-9433 Statuses=0009 0008 06:28:19 Msec=750 True Az=126.9 Ze=38.505 Az status=0009 Ze status=0008 06:28:19 Check angles 06:28:19 SkyScan query 06:28:19 SkyScan query done: ret=0 az=144.69<-9646 ze=38.505<-9433 Statuses=0009 0008 06:28:19 Msec=1500 True Az=144.69 Ze=38.505 Az status=0009 Ze status=0008 06:28:20 Check angles 06:28:20 SkyScan query 06:28:20 SkyScan query done: ret=0 az=162.285<-10819 ze=38.505<-9433 Statuses=0009 0008 06:28:20 Msec=2250 True Az=162.285 Ze=38.505 Az status=0009 Ze status=0008 06:28:20 Check angles 06:28:20 SkyScan query 06:28:21 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:28:21 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:28:21 Check angles 06:28:21 SkyScan query 06:28:22 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:28:22 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:28:22 Message to Master queued w/err=0: serial=55995 error=0 06:28:27 Received message from Master: op=Filter serial=55996 06:28:27 Color wheel filter change from 0 to 0 06:28:27 FLIGetFilterPos err=0 currentPosition=0 06:28:27 FLIGetStepsRemaining err=0 RemainingSteps=0 06:28:27 Filter is already there-color wheel unchanged 06:28:27 Received message from Master: op=Shutter serial=55997 06:28:27 Shutter LASER close 06:28:27 Received message from Camera: op=State serial=55999 06:28:27 GetSingleValue result=40 Value=cccccccc 06:28:27 SkyScan query 06:28:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:28:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:27 Parameters OK 06:28:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:27 Set A/D data flow result=40 06:28:27 Set A/D channel type result=40 06:28:27 Set A/D encoding result=40 06:28:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:27 Set channel filter=0.000000e+000 result=40 06:28:27 Config A/D Result=40 06:28:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:27 Get A/D filter: -9.255963e+061 result=40 06:28:27 Get A/D value=-858993460 result=40 06:28:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:27 Parameters OK 06:28:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:27 Set A/D data flow result=40 06:28:27 Set A/D channel type result=40 06:28:27 Set A/D encoding result=40 06:28:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:27 Set channel filter=0.000000e+000 result=40 06:28:27 Config A/D Result=40 06:28:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:27 Get A/D filter: -9.255963e+061 result=40 06:28:27 Get A/D value=-858993460 result=40 06:28:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:28:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:28:27 Aux= 06:28:27 Message to Camera, serial 55999 queued 06:29:04 Received message from Master: op=PointingHead serial=56012 06:29:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:29:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:29:05 Point started: ret=0 06:29:05 point_skyscan result=0 06:29:05 Check angles 06:29:05 SkyScan query 06:29:06 SkyScan query done: ret=0 az=152.775<-10185 ze=8.64<-11424 Statuses=0009 0009 06:29:06 Msec=0 True Az=152.775 Ze=8.64 Az status=0009 Ze status=0009 06:29:06 Check angles 06:29:06 SkyScan query 06:29:07 SkyScan query done: ret=0 az=135.24<-9016 ze=-12.3<-12820 Statuses=0009 0009 06:29:07 Msec=750 True Az=135.24 Ze=-12.3 Az status=0009 Ze status=0009 06:29:07 Check angles 06:29:07 SkyScan query 06:29:07 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.255<-14217 Statuses=0009 0009 06:29:07 Msec=1500 True Az=117.765 Ze=-33.255 Az status=0009 Ze status=0009 06:29:08 Check angles 06:29:08 SkyScan query 06:29:08 SkyScan query done: ret=0 az=100.32<-6688 ze=-51.54<-15436 Statuses=0009 0009 06:29:08 Msec=2250 True Az=100.32 Ze=-51.54 Az status=0009 Ze status=0009 06:29:08 Check angles 06:29:08 SkyScan query 06:29:09 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.525<-15435 Statuses=0009 0008 06:29:09 Msec=3000 True Az=86.055 Ze=-51.525 Az status=0009 Ze status=0008 06:29:09 Check angles 06:29:09 SkyScan query 06:29:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:29:10 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:29:10 Message to Master queued w/err=0: serial=56012 error=0 06:29:15 Received message from Master: op=Filter serial=56013 06:29:15 Color wheel filter change from 0 to 0 06:29:15 FLIGetFilterPos err=0 currentPosition=0 06:29:15 FLIGetStepsRemaining err=0 RemainingSteps=0 06:29:15 Filter is already there-color wheel unchanged 06:29:15 Received message from Master: op=Shutter serial=56014 06:29:15 Shutter LASER close 06:29:15 Received message from Camera: op=State serial=56016 06:29:15 GetSingleValue result=40 Value=cccccccc 06:29:15 SkyScan query 06:29:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:29:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:15 Parameters OK 06:29:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:15 Set A/D data flow result=40 06:29:15 Set A/D channel type result=40 06:29:15 Set A/D encoding result=40 06:29:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:15 Set channel filter=0.000000e+000 result=40 06:29:15 Config A/D Result=40 06:29:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:15 Get A/D filter: -9.255963e+061 result=40 06:29:15 Get A/D value=-858993460 result=40 06:29:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:15 Parameters OK 06:29:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:15 Set A/D data flow result=40 06:29:15 Set A/D channel type result=40 06:29:15 Set A/D encoding result=40 06:29:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:15 Set channel filter=0.000000e+000 result=40 06:29:15 Config A/D Result=40 06:29:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:15 Get A/D filter: -9.255963e+061 result=40 06:29:15 Get A/D value=-858993460 result=40 06:29:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:29:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:29:15 Aux= 06:29:15 Message to Camera, serial 56016 queued 06:29:52 Received message from Master: op=PointingHead serial=56029 06:29:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:29:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:29:53 Point started: ret=0 06:29:53 point_skyscan result=0 06:29:53 Check angles 06:29:53 SkyScan query 06:29:54 SkyScan query done: ret=0 az=108.765<-7251 ze=-80.985<-17399 Statuses=0009 0009 06:29:54 Msec=0 True Az=108.765 Ze=-80.985 Az status=0009 Ze status=0009 06:29:54 Check angles 06:29:54 SkyScan query 06:29:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.97<-18798 Statuses=0008 0009 06:29:55 Msec=750 True Az=112.995 Ze=-101.97 Az status=0008 Ze status=0009 06:29:55 Check angles 06:29:55 SkyScan query 06:29:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.91<-20194 Statuses=0008 0009 06:29:55 Msec=1500 True Az=112.995 Ze=-122.91 Az status=0008 Ze status=0009 06:29:56 Check angles 06:29:56 SkyScan query 06:29:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.85<-21590 Statuses=0008 0009 06:29:56 Msec=2250 True Az=112.995 Ze=-143.85 Az status=0008 Ze status=0009 06:29:56 Check angles 06:29:56 SkyScan query 06:29:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.805<-22987 Statuses=0008 0009 06:29:57 Msec=3000 True Az=112.995 Ze=-164.805 Az status=0008 Ze status=0009 06:29:57 Check angles 06:29:57 SkyScan query 06:29:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 06:29:58 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 06:29:58 Message to Master queued w/err=0: serial=56029 error=0 06:30:03 Received message from Master: op=Filter serial=56030 06:30:03 Color wheel filter change from 0 to 0 06:30:03 FLIGetFilterPos err=0 currentPosition=0 06:30:03 FLIGetStepsRemaining err=0 RemainingSteps=0 06:30:03 Filter is already there-color wheel unchanged 06:30:03 Received message from Master: op=Shutter serial=56031 06:30:03 Shutter LASER open 06:30:03 Received message from Camera: op=State serial=56033 06:30:03 GetSingleValue result=40 Value=cccccccc 06:30:03 SkyScan query 06:30:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:30:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:04 Parameters OK 06:30:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:04 Set A/D data flow result=40 06:30:04 Set A/D channel type result=40 06:30:04 Set A/D encoding result=40 06:30:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:04 Set channel filter=0.000000e+000 result=40 06:30:04 Config A/D Result=40 06:30:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:04 Get A/D filter: -9.255963e+061 result=40 06:30:04 Get A/D value=-858993460 result=40 06:30:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:04 Parameters OK 06:30:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:04 Set A/D data flow result=40 06:30:04 Set A/D channel type result=40 06:30:04 Set A/D encoding result=40 06:30:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:04 Set channel filter=0.000000e+000 result=40 06:30:04 Config A/D Result=40 06:30:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:04 Get A/D filter: -9.255963e+061 result=40 06:30:04 Get A/D value=-858993460 result=40 06:30:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:30:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:30:04 Aux= 06:30:04 Message to Camera, serial 56033 queued 06:30:12 Received message from Master: op=Shutter serial=56043 06:30:12 Shutter LASER close 06:30:12 Received message from Master: op=PointingHead serial=56047 06:30:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:30:12 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:30:13 Point started: ret=0 06:30:13 point_skyscan result=0 06:30:14 Check angles 06:30:14 SkyScan query 06:30:14 SkyScan query done: ret=0 az=89.895<-5993 ze=157.2<-1520 Statuses=0009 0009 06:30:14 Msec=0 True Az=89.895 Ze=157.2 Az status=0009 Ze status=0009 06:30:14 Check angles 06:30:14 SkyScan query 06:30:15 SkyScan query done: ret=0 az=72.3<-4820 ze=136.215<-2919 Statuses=0009 0009 06:30:15 Msec=750 True Az=72.3 Ze=136.215 Az status=0009 Ze status=0009 06:30:15 Check angles 06:30:15 SkyScan query 06:30:16 SkyScan query done: ret=0 az=55.005<-3667 ze=115.305<-4313 Statuses=0009 0009 06:30:16 Msec=1500 True Az=55.005 Ze=115.305 Az status=0009 Ze status=0009 06:30:16 Check angles 06:30:16 SkyScan query 06:30:16 SkyScan query done: ret=0 az=40.875<-2725 ze=94.305<-5713 Statuses=0009 0009 06:30:16 Msec=2250 True Az=40.875 Ze=94.305 Az status=0009 Ze status=0009 06:30:17 Check angles 06:30:17 SkyScan query 06:30:17 SkyScan query done: ret=0 az=40.995<-2733 ze=73.38<-7108 Statuses=0008 0009 06:30:17 Msec=3000 True Az=40.995 Ze=73.38 Az status=0008 Ze status=0009 06:30:17 Check angles 06:30:17 SkyScan query 06:30:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.8<-8480 Statuses=0008 0009 06:30:18 Msec=3750 True Az=40.995 Ze=52.8 Az status=0008 Ze status=0009 06:30:18 Check angles 06:30:18 SkyScan query 06:30:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:30:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:30:19 Message to Master queued w/err=0: serial=56047 error=0 06:30:24 Received message from Master: op=Filter serial=56048 06:30:24 Color wheel filter change from 0 to 0 06:30:24 FLIGetFilterPos err=0 currentPosition=0 06:30:24 FLIGetStepsRemaining err=0 RemainingSteps=0 06:30:24 Filter is already there-color wheel unchanged 06:30:24 Received message from Master: op=Shutter serial=56049 06:30:24 Shutter LASER close 06:30:24 Received message from Camera: op=State serial=56051 06:30:24 GetSingleValue result=40 Value=cccccccc 06:30:24 SkyScan query 06:30:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:30:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:25 Parameters OK 06:30:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:25 Set A/D data flow result=40 06:30:25 Set A/D channel type result=40 06:30:25 Set A/D encoding result=40 06:30:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:25 Set channel filter=0.000000e+000 result=40 06:30:25 Config A/D Result=40 06:30:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:25 Get A/D filter: -9.255963e+061 result=40 06:30:25 Get A/D value=-858993460 result=40 06:30:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:25 Parameters OK 06:30:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:25 Set A/D data flow result=40 06:30:25 Set A/D channel type result=40 06:30:25 Set A/D encoding result=40 06:30:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:25 Set channel filter=0.000000e+000 result=40 06:30:25 Config A/D Result=40 06:30:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:25 Get A/D filter: -9.255963e+061 result=40 06:30:25 Get A/D value=-858993460 result=40 06:30:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:30:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:30:25 Aux= 06:30:25 Message to Camera, serial 56051 queued 06:31:01 Received message from Master: op=PointingHead serial=56064 06:31:01 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:31:01 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:31:02 Point started: ret=0 06:31:02 point_skyscan result=0 06:31:02 Check angles 06:31:02 SkyScan query 06:31:03 SkyScan query done: ret=0 az=64.245<-4283 ze=66.555<-7563 Statuses=0009 0008 06:31:03 Msec=0 True Az=64.245 Ze=66.555 Az status=0009 Ze status=0008 06:31:03 Check angles 06:31:03 SkyScan query 06:31:04 SkyScan query done: ret=0 az=81.51<-5434 ze=66.495<-7567 Statuses=0009 0008 06:31:04 Msec=750 True Az=81.51 Ze=66.495 Az status=0009 Ze status=0008 06:31:04 Check angles 06:31:04 SkyScan query 06:31:05 SkyScan query done: ret=0 az=99.675<-6645 ze=66.495<-7567 Statuses=0009 0008 06:31:05 Msec=1500 True Az=99.675 Ze=66.495 Az status=0009 Ze status=0008 06:31:05 Check angles 06:31:05 SkyScan query 06:31:05 SkyScan query done: ret=0 az=117.12<-7808 ze=66.495<-7567 Statuses=0009 0008 06:31:05 Msec=2250 True Az=117.12 Ze=66.495 Az status=0009 Ze status=0008 06:31:06 Check angles 06:31:06 SkyScan query 06:31:06 SkyScan query done: ret=0 az=134.58<-8972 ze=66.495<-7567 Statuses=0009 0008 06:31:06 Msec=3000 True Az=134.58 Ze=66.495 Az status=0009 Ze status=0008 06:31:06 Check angles 06:31:06 SkyScan query 06:31:07 SkyScan query done: ret=0 az=152.085<-10139 ze=66.495<-7567 Statuses=0009 0008 06:31:07 Msec=3750 True Az=152.085 Ze=66.495 Az status=0009 Ze status=0008 06:31:07 Check angles 06:31:07 SkyScan query 06:31:08 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:31:08 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 06:31:08 Message to Master queued w/err=0: serial=56064 error=0 06:31:13 Received message from Master: op=Filter serial=56065 06:31:13 Color wheel filter change from 0 to 0 06:31:13 FLIGetFilterPos err=0 currentPosition=0 06:31:13 FLIGetStepsRemaining err=0 RemainingSteps=0 06:31:13 Filter is already there-color wheel unchanged 06:31:13 Received message from Master: op=Shutter serial=56066 06:31:13 Shutter LASER close 06:31:13 Received message from Camera: op=State serial=56068 06:31:13 GetSingleValue result=40 Value=cccccccc 06:31:13 SkyScan query 06:31:13 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:31:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:13 Parameters OK 06:31:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:13 Set A/D data flow result=40 06:31:13 Set A/D channel type result=40 06:31:13 Set A/D encoding result=40 06:31:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:13 Set channel filter=0.000000e+000 result=40 06:31:13 Config A/D Result=40 06:31:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:13 Get A/D filter: -9.255963e+061 result=40 06:31:13 Get A/D value=-858993460 result=40 06:31:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:13 Parameters OK 06:31:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:13 Set A/D data flow result=40 06:31:13 Set A/D channel type result=40 06:31:13 Set A/D encoding result=40 06:31:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:13 Set channel filter=0.000000e+000 result=40 06:31:13 Config A/D Result=40 06:31:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:13 Get A/D filter: -9.255963e+061 result=40 06:31:13 Get A/D value=-858993460 result=40 06:31:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:13 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:31:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:31:13 Aux= 06:31:13 Message to Camera, serial 56068 queued 06:31:50 Received message from Master: op=PointingHead serial=56081 06:31:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:31:50 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:31:51 Point started: ret=0 06:31:51 point_skyscan result=0 06:31:51 Check angles 06:31:51 SkyScan query 06:31:52 SkyScan query done: ret=0 az=134.85<-8990 ze=36.645<-9557 Statuses=0009 0009 06:31:52 Msec=0 True Az=134.85 Ze=36.645 Az status=0009 Ze status=0009 06:31:52 Check angles 06:31:52 SkyScan query 06:31:53 SkyScan query done: ret=0 az=117.285<-7819 ze=15.72<-10952 Statuses=0009 0009 06:31:53 Msec=750 True Az=117.285 Ze=15.72 Az status=0009 Ze status=0009 06:31:53 Check angles 06:31:53 SkyScan query 06:31:53 SkyScan query done: ret=0 az=99.915<-6661 ze=-5.265<-12351 Statuses=0009 0009 06:31:53 Msec=1500 True Az=99.915 Ze=-5.265 Az status=0009 Ze status=0009 06:31:54 Check angles 06:31:54 SkyScan query 06:31:54 SkyScan query done: ret=0 az=82.485<-5499 ze=-26.205<-13747 Statuses=0009 0009 06:31:54 Msec=2250 True Az=82.485 Ze=-26.205 Az status=0009 Ze status=0009 06:31:54 Check angles 06:31:54 SkyScan query 06:31:55 SkyScan query done: ret=0 az=64.635<-4309 ze=-38.58<-14572 Statuses=0009 0008 06:31:55 Msec=3000 True Az=64.635 Ze=-38.58 Az status=0009 Ze status=0008 06:31:55 Check angles 06:31:55 SkyScan query 06:31:56 SkyScan query done: ret=0 az=47.16<-3144 ze=-38.52<-14568 Statuses=0009 0008 06:31:56 Msec=3750 True Az=47.16 Ze=-38.52 Az status=0009 Ze status=0008 06:31:56 Check angles 06:31:56 SkyScan query 06:31:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:31:56 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:31:56 Message to Master queued w/err=0: serial=56081 error=0 06:32:01 Received message from Master: op=Filter serial=56082 06:32:01 Color wheel filter change from 0 to 0 06:32:01 FLIGetFilterPos err=0 currentPosition=0 06:32:01 FLIGetStepsRemaining err=0 RemainingSteps=0 06:32:01 Filter is already there-color wheel unchanged 06:32:02 Received message from Master: op=Shutter serial=56083 06:32:02 Shutter LASER close 06:32:02 Received message from Camera: op=State serial=56085 06:32:02 GetSingleValue result=40 Value=cccccccc 06:32:02 SkyScan query 06:32:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:32:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:02 Parameters OK 06:32:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:02 Set A/D data flow result=40 06:32:02 Set A/D channel type result=40 06:32:02 Set A/D encoding result=40 06:32:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:02 Set channel filter=0.000000e+000 result=40 06:32:02 Config A/D Result=40 06:32:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:02 Get A/D filter: -9.255963e+061 result=40 06:32:02 Get A/D value=-858993460 result=40 06:32:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:02 Parameters OK 06:32:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:02 Set A/D data flow result=40 06:32:02 Set A/D channel type result=40 06:32:02 Set A/D encoding result=40 06:32:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:02 Set channel filter=0.000000e+000 result=40 06:32:02 Config A/D Result=40 06:32:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:02 Get A/D filter: -9.255963e+061 result=40 06:32:02 Get A/D value=-858993460 result=40 06:32:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:32:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:32:02 Aux= 06:32:02 Message to Camera, serial 56085 queued 06:32:39 Received message from Master: op=PointingHead serial=56098 06:32:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:32:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:32:39 Point started: ret=0 06:32:39 point_skyscan result=0 06:32:40 Check angles 06:32:40 SkyScan query 06:32:41 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.205<-16547 Statuses=0009 0009 06:32:41 Msec=0 True Az=63.945 Ze=-68.205 Az status=0009 Ze status=0009 06:32:41 Check angles 06:32:41 SkyScan query 06:32:41 SkyScan query done: ret=0 az=81.63<-5442 ze=-89.64<-17976 Statuses=0009 0009 06:32:41 Msec=750 True Az=81.63 Ze=-89.64 Az status=0009 Ze status=0009 06:32:42 Check angles 06:32:42 SkyScan query 06:32:42 SkyScan query done: ret=0 az=99.405<-6627 ze=-110.595<-19373 Statuses=0009 0009 06:32:42 Msec=1500 True Az=99.405 Ze=-110.595 Az status=0009 Ze status=0009 06:32:42 Check angles 06:32:42 SkyScan query 06:32:43 SkyScan query done: ret=0 az=116.925<-7795 ze=-131.505<-20767 Statuses=0009 0009 06:32:43 Msec=2250 True Az=116.925 Ze=-131.505 Az status=0009 Ze status=0009 06:32:43 Check angles 06:32:43 SkyScan query 06:32:44 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 06:32:44 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 06:32:44 Check angles 06:32:44 SkyScan query 06:32:44 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:32:44 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:32:44 Message to Master queued w/err=0: serial=56098 error=0 06:32:49 Received message from Master: op=Filter serial=56099 06:32:49 Color wheel filter change from 0 to 0 06:32:49 FLIGetFilterPos err=0 currentPosition=0 06:32:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:32:49 Filter is already there-color wheel unchanged 06:32:50 Received message from Master: op=Shutter serial=56100 06:32:50 Shutter LASER close 06:32:50 Received message from Camera: op=State serial=56102 06:32:50 GetSingleValue result=40 Value=cccccccc 06:32:50 SkyScan query 06:32:50 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:32:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:50 Parameters OK 06:32:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:50 Set A/D data flow result=40 06:32:50 Set A/D channel type result=40 06:32:50 Set A/D encoding result=40 06:32:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:50 Set channel filter=0.000000e+000 result=40 06:32:50 Config A/D Result=40 06:32:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:50 Get A/D filter: -9.255963e+061 result=40 06:32:50 Get A/D value=-858993460 result=40 06:32:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:50 Parameters OK 06:32:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:50 Set A/D data flow result=40 06:32:50 Set A/D channel type result=40 06:32:50 Set A/D encoding result=40 06:32:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:50 Set channel filter=0.000000e+000 result=40 06:32:50 Config A/D Result=40 06:32:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:50 Get A/D filter: -9.255963e+061 result=40 06:32:50 Get A/D value=-858993460 result=40 06:32:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:50 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:32:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:32:50 Aux= 06:32:50 Message to Camera, serial 56102 queued 06:33:27 Received message from Master: op=PointingHead serial=56115 06:33:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:33:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:33:28 Point started: ret=0 06:33:28 point_skyscan result=0 06:33:28 Check angles 06:33:28 SkyScan query 06:33:29 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 06:33:29 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 06:33:29 Check angles 06:33:29 SkyScan query 06:33:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:33:30 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:33:30 Message to Master queued w/err=0: serial=56115 error=0 06:33:35 Received message from Master: op=Filter serial=56116 06:33:35 Color wheel filter change from 0 to 0 06:33:35 FLIGetFilterPos err=0 currentPosition=0 06:33:35 FLIGetStepsRemaining err=0 RemainingSteps=0 06:33:35 Filter is already there-color wheel unchanged 06:33:35 Received message from Master: op=Shutter serial=56117 06:33:35 Shutter LASER open 06:33:35 Received message from Camera: op=State serial=56119 06:33:35 GetSingleValue result=40 Value=cccccccc 06:33:35 SkyScan query 06:33:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:33:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:36 Parameters OK 06:33:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:36 Set A/D data flow result=40 06:33:36 Set A/D channel type result=40 06:33:36 Set A/D encoding result=40 06:33:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:36 Set channel filter=0.000000e+000 result=40 06:33:36 Config A/D Result=40 06:33:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:36 Get A/D filter: -9.255963e+061 result=40 06:33:36 Get A/D value=-858993460 result=40 06:33:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:36 Parameters OK 06:33:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:36 Set A/D data flow result=40 06:33:36 Set A/D channel type result=40 06:33:36 Set A/D encoding result=40 06:33:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:36 Set channel filter=0.000000e+000 result=40 06:33:36 Config A/D Result=40 06:33:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:36 Get A/D filter: -9.255963e+061 result=40 06:33:36 Get A/D value=-858993460 result=40 06:33:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:33:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:33:36 Aux= 06:33:36 Message to Camera, serial 56119 queued 06:33:44 Received message from Master: op=Shutter serial=56129 06:33:44 Shutter LASER close 06:33:45 Received message from Master: op=PointingHead serial=56133 06:33:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:33:45 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:33:45 Point started: ret=0 06:33:45 point_skyscan result=0 06:33:46 Check angles 06:33:46 SkyScan query 06:33:46 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.845<-21523 Statuses=0009 0009 06:33:46 Msec=0 True Az=136.38 Ze=-142.845 Az status=0009 Ze status=0009 06:33:46 Check angles 06:33:46 SkyScan query 06:33:47 SkyScan query done: ret=0 az=153.825<-10255 ze=-121.845<-20123 Statuses=0009 0009 06:33:47 Msec=750 True Az=153.825 Ze=-121.845 Az status=0009 Ze status=0009 06:33:47 Check angles 06:33:47 SkyScan query 06:33:48 SkyScan query done: ret=0 az=171.3<-11420 ze=-100.92<-18728 Statuses=0009 0009 06:33:48 Msec=1500 True Az=171.3 Ze=-100.92 Az status=0009 Ze status=0009 06:33:48 Check angles 06:33:48 SkyScan query 06:33:48 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.515<-17301 Statuses=0008 0009 06:33:48 Msec=2250 True Az=176.025 Ze=-79.515 Az status=0008 Ze status=0009 06:33:49 Check angles 06:33:49 SkyScan query 06:33:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.095<-15873 Statuses=0008 0009 06:33:49 Msec=3000 True Az=176.01 Ze=-58.095 Az status=0008 Ze status=0009 06:33:49 Check angles 06:33:49 SkyScan query 06:33:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 06:33:50 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 06:33:50 Message to Master queued w/err=0: serial=56133 error=0 06:33:55 Received message from Master: op=Filter serial=56134 06:33:55 Color wheel filter change from 0 to 0 06:33:55 FLIGetFilterPos err=0 currentPosition=0 06:33:55 FLIGetStepsRemaining err=0 RemainingSteps=0 06:33:55 Filter is already there-color wheel unchanged 06:33:55 Received message from Master: op=Shutter serial=56135 06:33:55 Shutter LASER close 06:33:55 Received message from Camera: op=State serial=56137 06:33:55 GetSingleValue result=40 Value=cccccccc 06:33:55 SkyScan query 06:33:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:33:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:56 Parameters OK 06:33:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:56 Set A/D data flow result=40 06:33:56 Set A/D channel type result=40 06:33:56 Set A/D encoding result=40 06:33:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:56 Set channel filter=0.000000e+000 result=40 06:33:56 Config A/D Result=40 06:33:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:56 Get A/D filter: -9.255963e+061 result=40 06:33:56 Get A/D value=-858993460 result=40 06:33:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:56 Parameters OK 06:33:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:56 Set A/D data flow result=40 06:33:56 Set A/D channel type result=40 06:33:56 Set A/D encoding result=40 06:33:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:56 Set channel filter=0.000000e+000 result=40 06:33:56 Config A/D Result=40 06:33:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:56 Get A/D filter: -9.255963e+061 result=40 06:33:56 Get A/D value=-858993460 result=40 06:33:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:33:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:33:56 Aux= 06:33:56 Message to Camera, serial 56137 queued 06:34:33 Received message from Master: op=PointingHead serial=56150 06:34:33 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:34:33 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:34:33 Point started: ret=0 06:34:33 point_skyscan result=0 06:34:34 Check angles 06:34:34 SkyScan query 06:34:34 SkyScan query done: ret=0 az=153<-10200 ze=-21.78<-13452 Statuses=0009 0009 06:34:34 Msec=0 True Az=153 Ze=-21.78 Az status=0009 Ze status=0009 06:34:35 Check angles 06:34:35 SkyScan query 06:34:35 SkyScan query done: ret=0 az=135.255<-9017 ze=-0.315<-12021 Statuses=0009 0009 06:34:35 Msec=750 True Az=135.255 Ze=-0.315 Az status=0009 Ze status=0009 06:34:35 Check angles 06:34:35 SkyScan query 06:34:36 SkyScan query done: ret=0 az=117.57<-7838 ze=20.58<-10628 Statuses=0009 0009 06:34:36 Msec=1500 True Az=117.57 Ze=20.58 Az status=0009 Ze status=0009 06:34:36 Check angles 06:34:36 SkyScan query 06:34:37 SkyScan query done: ret=0 az=100.17<-6678 ze=41.595<-9227 Statuses=0009 0009 06:34:37 Msec=2250 True Az=100.17 Ze=41.595 Az status=0009 Ze status=0009 06:34:37 Check angles 06:34:37 SkyScan query 06:34:37 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 06:34:37 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 06:34:38 Check angles 06:34:38 SkyScan query 06:34:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:34:38 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:34:38 Message to Master queued w/err=0: serial=56150 error=0 06:34:43 Received message from Master: op=Filter serial=56151 06:34:43 Color wheel filter change from 0 to 0 06:34:43 FLIGetFilterPos err=0 currentPosition=0 06:34:43 FLIGetStepsRemaining err=0 RemainingSteps=0 06:34:43 Filter is already there-color wheel unchanged 06:34:43 Received message from Master: op=Shutter serial=56152 06:34:43 Shutter LASER close 06:34:43 Received message from Camera: op=State serial=56154 06:34:43 GetSingleValue result=40 Value=cccccccc 06:34:43 SkyScan query 06:34:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:34:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:44 Parameters OK 06:34:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:44 Set A/D data flow result=40 06:34:44 Set A/D channel type result=40 06:34:44 Set A/D encoding result=40 06:34:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:44 Set channel filter=0.000000e+000 result=40 06:34:44 Config A/D Result=40 06:34:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:44 Get A/D filter: -9.255963e+061 result=40 06:34:44 Get A/D value=-858993460 result=40 06:34:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:44 Parameters OK 06:34:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:44 Set A/D data flow result=40 06:34:44 Set A/D channel type result=40 06:34:44 Set A/D encoding result=40 06:34:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:44 Set channel filter=0.000000e+000 result=40 06:34:44 Config A/D Result=40 06:34:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:44 Get A/D filter: -9.255963e+061 result=40 06:34:44 Get A/D value=-858993460 result=40 06:34:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:34:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:34:44 Aux= 06:34:44 Message to Camera, serial 56154 queued 06:35:21 Received message from Master: op=PointingHead serial=56167 06:35:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:35:21 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:35:21 Point started: ret=0 06:35:21 point_skyscan result=0 06:35:22 Check angles 06:35:22 SkyScan query 06:35:23 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 06:35:23 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 06:35:23 Check angles 06:35:23 SkyScan query 06:35:23 SkyScan query done: ret=0 az=126.51<-8434 ze=38.505<-9433 Statuses=0009 0008 06:35:23 Msec=750 True Az=126.51 Ze=38.505 Az status=0009 Ze status=0008 06:35:23 Check angles 06:35:23 SkyScan query 06:35:24 SkyScan query done: ret=0 az=143.94<-9596 ze=38.505<-9433 Statuses=0009 0008 06:35:24 Msec=1500 True Az=143.94 Ze=38.505 Az status=0009 Ze status=0008 06:35:24 Check angles 06:35:24 SkyScan query 06:35:25 SkyScan query done: ret=0 az=161.28<-10752 ze=38.505<-9433 Statuses=0009 0008 06:35:25 Msec=2250 True Az=161.28 Ze=38.505 Az status=0009 Ze status=0008 06:35:25 Check angles 06:35:25 SkyScan query 06:35:26 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 06:35:26 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 06:35:26 Check angles 06:35:26 SkyScan query 06:35:26 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:35:26 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:35:26 Message to Master queued w/err=0: serial=56167 error=0 06:35:31 Received message from Master: op=Filter serial=56168 06:35:31 Color wheel filter change from 0 to 0 06:35:31 FLIGetFilterPos err=0 currentPosition=0 06:35:31 FLIGetStepsRemaining err=0 RemainingSteps=0 06:35:31 Filter is already there-color wheel unchanged 06:35:31 Received message from Master: op=Shutter serial=56169 06:35:31 Shutter LASER close 06:35:31 Received message from Camera: op=State serial=56171 06:35:31 GetSingleValue result=40 Value=cccccccc 06:35:31 SkyScan query [UTC 2018-12-11 06:35:32] 06:35:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:35:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:32 Parameters OK 06:35:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:32 Set A/D data flow result=40 06:35:32 Set A/D channel type result=40 06:35:32 Set A/D encoding result=40 06:35:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:32 Set channel filter=0.000000e+000 result=40 06:35:32 Config A/D Result=40 06:35:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:32 Get A/D filter: -9.255963e+061 result=40 06:35:32 Get A/D value=-858993460 result=40 06:35:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:32 Parameters OK 06:35:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:32 Set A/D data flow result=40 06:35:32 Set A/D channel type result=40 06:35:32 Set A/D encoding result=40 06:35:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:32 Set channel filter=0.000000e+000 result=40 06:35:32 Config A/D Result=40 06:35:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:32 Get A/D filter: -9.255963e+061 result=40 06:35:32 Get A/D value=-858993460 result=40 06:35:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:35:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:35:32 Aux= 06:35:32 Message to Camera, serial 56171 queued [UTC 2018-12-11 06:35:54] 06:36:09 Received message from Master: op=PointingHead serial=56184 06:36:09 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:36:09 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:36:09 Point started: ret=0 06:36:09 point_skyscan result=0 06:36:10 Check angles 06:36:10 SkyScan query 06:36:11 SkyScan query done: ret=0 az=152.79<-10186 ze=8.4<-11440 Statuses=0009 0009 06:36:11 Msec=0 True Az=152.79 Ze=8.4 Az status=0009 Ze status=0009 06:36:11 Check angles 06:36:11 SkyScan query 06:36:11 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.51<-12834 Statuses=0009 0009 06:36:11 Msec=750 True Az=135.375 Ze=-12.51 Az status=0009 Ze status=0009 06:36:11 Check angles 06:36:11 SkyScan query 06:36:12 SkyScan query done: ret=0 az=117.735<-7849 ze=-33.465<-14231 Statuses=0009 0009 06:36:12 Msec=1500 True Az=117.735 Ze=-33.465 Az status=0009 Ze status=0009 06:36:12 Check angles 06:36:12 SkyScan query 06:36:13 SkyScan query done: ret=0 az=100.05<-6670 ze=-51.555<-15437 Statuses=0009 0009 06:36:13 Msec=2250 True Az=100.05 Ze=-51.555 Az status=0009 Ze status=0009 06:36:13 Check angles 06:36:13 SkyScan query 06:36:14 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 06:36:14 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 06:36:14 Check angles 06:36:14 SkyScan query 06:36:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:36:14 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:36:14 Message to Master queued w/err=0: serial=56184 error=0 06:36:19 Received message from Master: op=Filter serial=56185 06:36:19 Color wheel filter change from 0 to 0 06:36:19 FLIGetFilterPos err=0 currentPosition=0 06:36:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:36:19 Filter is already there-color wheel unchanged 06:36:20 Received message from Master: op=Shutter serial=56186 06:36:20 Shutter LASER close 06:36:20 Received message from Camera: op=State serial=56188 06:36:20 GetSingleValue result=40 Value=cccccccc 06:36:20 SkyScan query 06:36:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:36:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:20 Parameters OK 06:36:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:20 Set A/D data flow result=40 06:36:20 Set A/D channel type result=40 06:36:20 Set A/D encoding result=40 06:36:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:20 Set channel filter=0.000000e+000 result=40 06:36:20 Config A/D Result=40 06:36:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:20 Get A/D filter: -9.255963e+061 result=40 06:36:20 Get A/D value=-858993460 result=40 06:36:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:20 Parameters OK 06:36:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:20 Set A/D data flow result=40 06:36:20 Set A/D channel type result=40 06:36:20 Set A/D encoding result=40 06:36:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:20 Set channel filter=0.000000e+000 result=40 06:36:20 Config A/D Result=40 06:36:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:20 Get A/D filter: -9.255963e+061 result=40 06:36:20 Get A/D value=-858993460 result=40 06:36:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:36:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:36:20 Aux= 06:36:20 Message to Camera, serial 56188 queued 06:36:57 Received message from Master: op=PointingHead serial=56201 06:36:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:36:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:36:57 Point started: ret=0 06:36:57 point_skyscan result=0 06:36:58 Check angles 06:36:58 SkyScan query 06:36:59 SkyScan query done: ret=0 az=109.26<-7284 ze=-81.69<-17446 Statuses=0009 0009 06:36:59 Msec=0 True Az=109.26 Ze=-81.69 Az status=0009 Ze status=0009 06:36:59 Check angles 06:36:59 SkyScan query 06:36:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.615<-18841 Statuses=0008 0009 06:36:59 Msec=750 True Az=112.995 Ze=-102.615 Az status=0008 Ze status=0009 06:37:00 Check angles 06:37:00 SkyScan query 06:37:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.6<-20240 Statuses=0008 0009 06:37:00 Msec=1500 True Az=112.995 Ze=-123.6 Az status=0008 Ze status=0009 06:37:00 Check angles 06:37:00 SkyScan query 06:37:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.525<-21635 Statuses=0008 0009 06:37:01 Msec=2250 True Az=112.995 Ze=-144.525 Az status=0008 Ze status=0009 06:37:01 Check angles 06:37:01 SkyScan query 06:37:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.48<-23032 Statuses=0008 0009 06:37:02 Msec=3000 True Az=112.995 Ze=-165.48 Az status=0008 Ze status=0009 06:37:02 Check angles 06:37:02 SkyScan query 06:37:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:37:02 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:37:02 Message to Master queued w/err=0: serial=56201 error=0 06:37:07 Received message from Master: op=Filter serial=56202 06:37:07 Color wheel filter change from 0 to 0 06:37:07 FLIGetFilterPos err=0 currentPosition=0 06:37:07 FLIGetStepsRemaining err=0 RemainingSteps=0 06:37:07 Filter is already there-color wheel unchanged 06:37:08 Received message from Master: op=Shutter serial=56203 06:37:08 Shutter LASER open 06:37:08 Received message from Camera: op=State serial=56205 06:37:08 GetSingleValue result=40 Value=cccccccc 06:37:08 SkyScan query 06:37:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:37:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:08 Parameters OK 06:37:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:08 Set A/D data flow result=40 06:37:08 Set A/D channel type result=40 06:37:08 Set A/D encoding result=40 06:37:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:08 Set channel filter=0.000000e+000 result=40 06:37:08 Config A/D Result=40 06:37:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:08 Get A/D filter: -9.255963e+061 result=40 06:37:08 Get A/D value=-858993460 result=40 06:37:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:08 Parameters OK 06:37:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:08 Set A/D data flow result=40 06:37:08 Set A/D channel type result=40 06:37:08 Set A/D encoding result=40 06:37:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:08 Set channel filter=0.000000e+000 result=40 06:37:08 Config A/D Result=40 06:37:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:08 Get A/D filter: -9.255963e+061 result=40 06:37:08 Get A/D value=-858993460 result=40 06:37:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:37:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:37:08 Aux= 06:37:08 Message to Camera, serial 56205 queued 06:37:17 Received message from Master: op=Shutter serial=56215 06:37:17 Shutter LASER close 06:37:17 Received message from Master: op=PointingHead serial=56219 06:37:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:37:17 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:37:18 Point started: ret=0 06:37:18 point_skyscan result=0 06:37:18 Check angles 06:37:18 SkyScan query 06:37:19 SkyScan query done: ret=0 az=89.49<-5966 ze=156.795<-1547 Statuses=0009 0009 06:37:19 Msec=0 True Az=89.49 Ze=156.795 Az status=0009 Ze status=0009 06:37:19 Check angles 06:37:19 SkyScan query 06:37:20 SkyScan query done: ret=0 az=71.925<-4795 ze=135.855<-2943 Statuses=0009 0009 06:37:20 Msec=750 True Az=71.925 Ze=135.855 Az status=0009 Ze status=0009 06:37:20 Check angles 06:37:20 SkyScan query 06:37:20 SkyScan query done: ret=0 az=54.72<-3648 ze=114.87<-4342 Statuses=0009 0009 06:37:20 Msec=1500 True Az=54.72 Ze=114.87 Az status=0009 Ze status=0009 06:37:21 Check angles 06:37:21 SkyScan query 06:37:21 SkyScan query done: ret=0 az=40.95<-2730 ze=93.495<-5767 Statuses=0009 0009 06:37:21 Msec=2250 True Az=40.95 Ze=93.495 Az status=0009 Ze status=0009 06:37:21 Check angles 06:37:21 SkyScan query 06:37:22 SkyScan query done: ret=0 az=40.995<-2733 ze=72.495<-7167 Statuses=0008 0009 06:37:22 Msec=3000 True Az=40.995 Ze=72.495 Az status=0008 Ze status=0009 06:37:22 Check angles 06:37:22 SkyScan query 06:37:23 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 06:37:23 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 06:37:23 Check angles 06:37:23 SkyScan query 06:37:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:37:23 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:37:23 Message to Master queued w/err=0: serial=56219 error=0 06:37:28 Received message from Master: op=Filter serial=56220 06:37:28 Color wheel filter change from 0 to 0 06:37:28 FLIGetFilterPos err=0 currentPosition=0 06:37:28 FLIGetStepsRemaining err=0 RemainingSteps=0 06:37:28 Filter is already there-color wheel unchanged 06:37:29 Received message from Master: op=Shutter serial=56221 06:37:29 Shutter LASER close 06:37:29 Received message from Camera: op=State serial=56223 06:37:29 GetSingleValue result=40 Value=cccccccc 06:37:29 SkyScan query 06:37:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:37:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:29 Parameters OK 06:37:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:29 Set A/D data flow result=40 06:37:29 Set A/D channel type result=40 06:37:29 Set A/D encoding result=40 06:37:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:29 Set channel filter=0.000000e+000 result=40 06:37:29 Config A/D Result=40 06:37:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:29 Get A/D filter: -9.255963e+061 result=40 06:37:29 Get A/D value=-858993460 result=40 06:37:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:29 Parameters OK 06:37:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:29 Set A/D data flow result=40 06:37:29 Set A/D channel type result=40 06:37:29 Set A/D encoding result=40 06:37:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:29 Set channel filter=0.000000e+000 result=40 06:37:29 Config A/D Result=40 06:37:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:29 Get A/D filter: -9.255963e+061 result=40 06:37:29 Get A/D value=-858993460 result=40 06:37:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:37:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:37:29 Aux= 06:37:29 Message to Camera, serial 56223 queued 06:38:05 Received message from Master: op=PointingHead serial=56235 06:38:05 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:38:05 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:38:06 Point started: ret=0 06:38:06 point_skyscan result=0 06:38:06 Check angles 06:38:06 SkyScan query 06:38:07 SkyScan query done: ret=0 az=64.035<-4269 ze=66.555<-7563 Statuses=0009 0008 06:38:07 Msec=0 True Az=64.035 Ze=66.555 Az status=0009 Ze status=0008 06:38:07 Check angles 06:38:07 SkyScan query 06:38:08 SkyScan query done: ret=0 az=81.39<-5426 ze=66.51<-7566 Statuses=0009 0008 06:38:08 Msec=750 True Az=81.39 Ze=66.51 Az status=0009 Ze status=0008 06:38:08 Check angles 06:38:08 SkyScan query 06:38:08 SkyScan query done: ret=0 az=99.48<-6632 ze=66.495<-7567 Statuses=0009 0008 06:38:08 Msec=1500 True Az=99.48 Ze=66.495 Az status=0009 Ze status=0008 06:38:09 Check angles 06:38:09 SkyScan query 06:38:09 SkyScan query done: ret=0 az=117.03<-7802 ze=66.495<-7567 Statuses=0009 0008 06:38:09 Msec=2250 True Az=117.03 Ze=66.495 Az status=0009 Ze status=0008 06:38:09 Check angles 06:38:09 SkyScan query 06:38:10 SkyScan query done: ret=0 az=134.385<-8959 ze=66.495<-7567 Statuses=0009 0008 06:38:10 Msec=3000 True Az=134.385 Ze=66.495 Az status=0009 Ze status=0008 06:38:10 Check angles 06:38:10 SkyScan query 06:38:11 SkyScan query done: ret=0 az=151.935<-10129 ze=66.495<-7567 Statuses=0009 0008 06:38:11 Msec=3750 True Az=151.935 Ze=66.495 Az status=0009 Ze status=0008 06:38:11 Check angles 06:38:11 SkyScan query 06:38:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:38:11 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 06:38:11 Message to Master queued w/err=0: serial=56235 error=0 06:38:16 Received message from Master: op=Filter serial=56236 06:38:16 Color wheel filter change from 0 to 0 06:38:16 FLIGetFilterPos err=0 currentPosition=0 06:38:16 FLIGetStepsRemaining err=0 RemainingSteps=0 06:38:16 Filter is already there-color wheel unchanged 06:38:17 Received message from Master: op=Shutter serial=56237 06:38:17 Shutter LASER close 06:38:17 Received message from Camera: op=State serial=56239 06:38:17 GetSingleValue result=40 Value=cccccccc 06:38:17 SkyScan query 06:38:17 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:38:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:17 Parameters OK 06:38:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:17 Set A/D data flow result=40 06:38:17 Set A/D channel type result=40 06:38:17 Set A/D encoding result=40 06:38:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:17 Set channel filter=0.000000e+000 result=40 06:38:17 Config A/D Result=40 06:38:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:17 Get A/D filter: -9.255963e+061 result=40 06:38:17 Get A/D value=-858993460 result=40 06:38:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:17 Parameters OK 06:38:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:17 Set A/D data flow result=40 06:38:17 Set A/D channel type result=40 06:38:17 Set A/D encoding result=40 06:38:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:17 Set channel filter=0.000000e+000 result=40 06:38:17 Config A/D Result=40 06:38:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:17 Get A/D filter: -9.255963e+061 result=40 06:38:17 Get A/D value=-858993460 result=40 06:38:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:17 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:38:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:38:17 Aux= 06:38:17 Message to Camera, serial 56239 queued 06:38:54 Received message from Master: op=PointingHead serial=56252 06:38:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:38:54 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:38:54 Point started: ret=0 06:38:54 point_skyscan result=0 06:38:55 Check angles 06:38:55 SkyScan query 06:38:56 SkyScan query done: ret=0 az=134.55<-8970 ze=36.24<-9584 Statuses=0009 0009 06:38:56 Msec=0 True Az=134.55 Ze=36.24 Az status=0009 Ze status=0009 06:38:56 Check angles 06:38:56 SkyScan query 06:38:57 SkyScan query done: ret=0 az=117.045<-7803 ze=15.3<-10980 Statuses=0009 0009 06:38:57 Msec=750 True Az=117.045 Ze=15.3 Az status=0009 Ze status=0009 06:38:57 Check angles 06:38:57 SkyScan query 06:38:57 SkyScan query done: ret=0 az=99.72<-6648 ze=-5.685<-12379 Statuses=0009 0009 06:38:57 Msec=1500 True Az=99.72 Ze=-5.685 Az status=0009 Ze status=0009 06:38:57 Check angles 06:38:57 SkyScan query 06:38:58 SkyScan query done: ret=0 az=82.14<-5476 ze=-26.64<-13776 Statuses=0009 0009 06:38:58 Msec=2250 True Az=82.14 Ze=-26.64 Az status=0009 Ze status=0009 06:38:58 Check angles 06:38:58 SkyScan query 06:38:59 SkyScan query done: ret=0 az=64.65<-4310 ze=-38.565<-14571 Statuses=0009 0008 06:38:59 Msec=3000 True Az=64.65 Ze=-38.565 Az status=0009 Ze status=0008 06:38:59 Check angles 06:38:59 SkyScan query 06:39:00 SkyScan query done: ret=0 az=47.19<-3146 ze=-38.52<-14568 Statuses=0009 0008 06:39:00 Msec=3750 True Az=47.19 Ze=-38.52 Az status=0009 Ze status=0008 06:39:00 Check angles 06:39:00 SkyScan query 06:39:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:39:00 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:39:00 Message to Master queued w/err=0: serial=56252 error=0 06:39:05 Received message from Master: op=Filter serial=56253 06:39:05 Color wheel filter change from 0 to 0 06:39:05 FLIGetFilterPos err=0 currentPosition=0 06:39:05 FLIGetStepsRemaining err=0 RemainingSteps=0 06:39:05 Filter is already there-color wheel unchanged 06:39:05 Received message from Master: op=Shutter serial=56254 06:39:05 Shutter LASER close 06:39:05 Received message from Camera: op=State serial=56256 06:39:05 GetSingleValue result=40 Value=cccccccc 06:39:05 SkyScan query 06:39:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:39:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:06 Parameters OK 06:39:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:06 Set A/D data flow result=40 06:39:06 Set A/D channel type result=40 06:39:06 Set A/D encoding result=40 06:39:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:06 Set channel filter=0.000000e+000 result=40 06:39:06 Config A/D Result=40 06:39:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:06 Get A/D filter: -9.255963e+061 result=40 06:39:06 Get A/D value=-858993460 result=40 06:39:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:06 Parameters OK 06:39:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:06 Set A/D data flow result=40 06:39:06 Set A/D channel type result=40 06:39:06 Set A/D encoding result=40 06:39:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:06 Set channel filter=0.000000e+000 result=40 06:39:06 Config A/D Result=40 06:39:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:06 Get A/D filter: -9.255963e+061 result=40 06:39:06 Get A/D value=-858993460 result=40 06:39:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:39:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:39:06 Aux= 06:39:06 Message to Camera, serial 56256 queued 06:39:43 Received message from Master: op=PointingHead serial=56269 06:39:43 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:39:43 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:39:43 Point started: ret=0 06:39:43 point_skyscan result=0 06:39:44 Check angles 06:39:44 SkyScan query 06:39:45 SkyScan query done: ret=0 az=63.975<-4265 ze=-68.325<-16555 Statuses=0009 0009 06:39:45 Msec=0 True Az=63.975 Ze=-68.325 Az status=0009 Ze status=0009 06:39:45 Check angles 06:39:45 SkyScan query 06:39:45 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.31<-17954 Statuses=0009 0009 06:39:45 Msec=750 True Az=81.57 Ze=-89.31 Az status=0009 Ze status=0009 06:39:45 Check angles 06:39:45 SkyScan query 06:39:46 SkyScan query done: ret=0 az=99.435<-6629 ze=-110.73<-19382 Statuses=0009 0009 06:39:46 Msec=1500 True Az=99.435 Ze=-110.73 Az status=0009 Ze status=0009 06:39:46 Check angles 06:39:46 SkyScan query 06:39:47 SkyScan query done: ret=0 az=117.27<-7818 ze=-132.075<-20805 Statuses=0009 0009 06:39:47 Msec=2250 True Az=117.27 Ze=-132.075 Az status=0009 Ze status=0009 06:39:47 Check angles 06:39:47 SkyScan query 06:39:48 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.555<-21437 Statuses=0009 0008 06:39:48 Msec=3000 True Az=131.13 Ze=-141.555 Az status=0009 Ze status=0008 06:39:48 Check angles 06:39:48 SkyScan query 06:39:48 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 06:39:48 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 06:39:48 Message to Master queued w/err=0: serial=56269 error=0 06:39:53 Received message from Master: op=Filter serial=56270 06:39:53 Color wheel filter change from 0 to 0 06:39:53 FLIGetFilterPos err=0 currentPosition=0 06:39:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:39:53 Filter is already there-color wheel unchanged 06:39:54 Received message from Master: op=Shutter serial=56271 06:39:54 Shutter LASER close 06:39:54 Received message from Camera: op=State serial=56273 06:39:54 GetSingleValue result=40 Value=cccccccc 06:39:54 SkyScan query 06:39:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:39:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:54 Parameters OK 06:39:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:54 Set A/D data flow result=40 06:39:54 Set A/D channel type result=40 06:39:54 Set A/D encoding result=40 06:39:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:54 Set channel filter=0.000000e+000 result=40 06:39:54 Config A/D Result=40 06:39:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:54 Get A/D filter: -9.255963e+061 result=40 06:39:54 Get A/D value=-858993460 result=40 06:39:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:54 Parameters OK 06:39:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:54 Set A/D data flow result=40 06:39:54 Set A/D channel type result=40 06:39:54 Set A/D encoding result=40 06:39:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:54 Set channel filter=0.000000e+000 result=40 06:39:54 Config A/D Result=40 06:39:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:54 Get A/D filter: -9.255963e+061 result=40 06:39:54 Get A/D value=-858993460 result=40 06:39:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:54 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:39:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:39:54 Aux= 06:39:54 Message to Camera, serial 56273 queued 06:40:31 Received message from Master: op=PointingHead serial=56286 06:40:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:40:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:40:31 Point started: ret=0 06:40:31 point_skyscan result=0 06:40:32 Check angles 06:40:32 SkyScan query 06:40:33 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.255<-23417 Statuses=0009 0009 06:40:33 Msec=0 True Az=113.01 Ze=-171.255 Az status=0009 Ze status=0009 06:40:33 Check angles 06:40:33 SkyScan query 06:40:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:40:33 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:40:33 Message to Master queued w/err=0: serial=56286 error=0 06:40:38 Received message from Master: op=Filter serial=56287 06:40:38 Color wheel filter change from 0 to 0 06:40:38 FLIGetFilterPos err=0 currentPosition=0 06:40:38 FLIGetStepsRemaining err=0 RemainingSteps=0 06:40:38 Filter is already there-color wheel unchanged 06:40:39 Received message from Master: op=Shutter serial=56288 06:40:39 Shutter LASER open 06:40:39 Received message from Camera: op=State serial=56290 06:40:39 GetSingleValue result=40 Value=cccccccc 06:40:39 SkyScan query 06:40:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:40:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:39 Parameters OK 06:40:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:39 Set A/D data flow result=40 06:40:39 Set A/D channel type result=40 06:40:39 Set A/D encoding result=40 06:40:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:39 Set channel filter=0.000000e+000 result=40 06:40:39 Config A/D Result=40 06:40:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:39 Get A/D filter: -9.255963e+061 result=40 06:40:39 Get A/D value=-858993460 result=40 06:40:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:39 Parameters OK 06:40:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:39 Set A/D data flow result=40 06:40:39 Set A/D channel type result=40 06:40:39 Set A/D encoding result=40 06:40:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:39 Set channel filter=0.000000e+000 result=40 06:40:39 Config A/D Result=40 06:40:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:39 Get A/D filter: -9.255963e+061 result=40 06:40:39 Get A/D value=-858993460 result=40 06:40:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:40:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:40:39 Aux= 06:40:39 Message to Camera, serial 56290 queued 06:40:48 Received message from Master: op=Shutter serial=56300 06:40:48 Shutter LASER close 06:40:48 Received message from Master: op=PointingHead serial=56304 06:40:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:40:48 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:40:49 Point started: ret=0 06:40:49 point_skyscan result=0 06:40:50 Check angles 06:40:50 SkyScan query 06:40:50 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.445<-21563 Statuses=0009 0009 06:40:50 Msec=0 True Az=135.765 Ze=-143.445 Az status=0009 Ze status=0009 06:40:50 Check angles 06:40:50 SkyScan query 06:40:51 SkyScan query done: ret=0 az=153.375<-10225 ze=-122.475<-20165 Statuses=0009 0009 06:40:51 Msec=750 True Az=153.375 Ze=-122.475 Az status=0009 Ze status=0009 06:40:51 Check angles 06:40:51 SkyScan query 06:40:52 SkyScan query done: ret=0 az=170.745<-11383 ze=-101.475<-18765 Statuses=0009 0009 06:40:52 Msec=1500 True Az=170.745 Ze=-101.475 Az status=0009 Ze status=0009 06:40:52 Check angles 06:40:52 SkyScan query 06:40:52 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.535<-17369 Statuses=0008 0009 06:40:52 Msec=2250 True Az=176.025 Ze=-80.535 Az status=0008 Ze status=0009 06:40:53 Check angles 06:40:53 SkyScan query 06:40:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.64<-15976 Statuses=0008 0009 06:40:53 Msec=3000 True Az=175.995 Ze=-59.64 Az status=0008 Ze status=0009 06:40:53 Check angles 06:40:53 SkyScan query 06:40:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:40:54 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:40:54 Message to Master queued w/err=0: serial=56304 error=0 06:40:59 Received message from Master: op=Filter serial=56305 06:40:59 Color wheel filter change from 0 to 0 06:40:59 FLIGetFilterPos err=0 currentPosition=0 06:40:59 FLIGetStepsRemaining err=0 RemainingSteps=0 06:40:59 Filter is already there-color wheel unchanged 06:40:59 Received message from Master: op=Shutter serial=56306 06:40:59 Shutter LASER close 06:40:59 Received message from Camera: op=State serial=56308 06:40:59 GetSingleValue result=40 Value=cccccccc 06:40:59 SkyScan query 06:41:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:41:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:00 Parameters OK 06:41:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:00 Set A/D data flow result=40 06:41:00 Set A/D channel type result=40 06:41:00 Set A/D encoding result=40 06:41:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:00 Set channel filter=0.000000e+000 result=40 06:41:00 Config A/D Result=40 06:41:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:00 Get A/D filter: -9.255963e+061 result=40 06:41:00 Get A/D value=-858993460 result=40 06:41:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:00 Parameters OK 06:41:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:00 Set A/D data flow result=40 06:41:00 Set A/D channel type result=40 06:41:00 Set A/D encoding result=40 06:41:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:00 Set channel filter=0.000000e+000 result=40 06:41:00 Config A/D Result=40 06:41:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:00 Get A/D filter: -9.255963e+061 result=40 06:41:00 Get A/D value=-858993460 result=40 06:41:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:41:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:41:00 Aux= 06:41:00 Message to Camera, serial 56308 queued 06:41:37 Received message from Master: op=PointingHead serial=56321 06:41:37 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:41:37 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:41:37 Point started: ret=0 06:41:37 point_skyscan result=0 06:41:38 Check angles 06:41:38 SkyScan query 06:41:38 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.87<-13458 Statuses=0009 0009 06:41:38 Msec=0 True Az=152.985 Ze=-21.87 Az status=0009 Ze status=0009 06:41:38 Check angles 06:41:38 SkyScan query 06:41:39 SkyScan query done: ret=0 az=135.675<-9045 ze=-0.84<-12056 Statuses=0009 0009 06:41:39 Msec=750 True Az=135.675 Ze=-0.84 Az status=0009 Ze status=0009 06:41:39 Check angles 06:41:39 SkyScan query 06:41:40 SkyScan query done: ret=0 az=118.095<-7873 ze=20.07<-10662 Statuses=0009 0009 06:41:40 Msec=1500 True Az=118.095 Ze=20.07 Az status=0009 Ze status=0009 06:41:40 Check angles 06:41:40 SkyScan query 06:41:41 SkyScan query done: ret=0 az=100.23<-6682 ze=41.52<-9232 Statuses=0009 0009 06:41:41 Msec=2250 True Az=100.23 Ze=41.52 Az status=0009 Ze status=0009 06:41:41 Check angles 06:41:41 SkyScan query 06:41:41 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 06:41:41 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 06:41:41 Check angles 06:41:41 SkyScan query 06:41:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:41:42 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:41:42 Message to Master queued w/err=0: serial=56321 error=0 06:41:47 Received message from Master: op=Filter serial=56322 06:41:47 Color wheel filter change from 0 to 0 06:41:47 FLIGetFilterPos err=0 currentPosition=0 06:41:47 FLIGetStepsRemaining err=0 RemainingSteps=0 06:41:47 Filter is already there-color wheel unchanged 06:41:47 Received message from Master: op=Shutter serial=56323 06:41:47 Shutter LASER close 06:41:47 Received message from Camera: op=State serial=56325 06:41:47 GetSingleValue result=40 Value=cccccccc 06:41:47 SkyScan query 06:41:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:41:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:48 Parameters OK 06:41:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:48 Set A/D data flow result=40 06:41:48 Set A/D channel type result=40 06:41:48 Set A/D encoding result=40 06:41:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:48 Set channel filter=0.000000e+000 result=40 06:41:48 Config A/D Result=40 06:41:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:48 Get A/D filter: -9.255963e+061 result=40 06:41:48 Get A/D value=-858993460 result=40 06:41:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:48 Parameters OK 06:41:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:48 Set A/D data flow result=40 06:41:48 Set A/D channel type result=40 06:41:48 Set A/D encoding result=40 06:41:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:48 Set channel filter=0.000000e+000 result=40 06:41:48 Config A/D Result=40 06:41:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:48 Get A/D filter: -9.255963e+061 result=40 06:41:48 Get A/D value=-858993460 result=40 06:41:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:41:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:41:48 Aux= 06:41:48 Message to Camera, serial 56325 queued 06:42:25 Received message from Master: op=PointingHead serial=56338 06:42:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:42:25 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:42:25 Point started: ret=0 06:42:25 point_skyscan result=0 06:42:26 Check angles 06:42:26 SkyScan query 06:42:26 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 06:42:26 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 06:42:27 Check angles 06:42:27 SkyScan query 06:42:27 SkyScan query done: ret=0 az=126.54<-8436 ze=38.505<-9433 Statuses=0009 0008 06:42:27 Msec=750 True Az=126.54 Ze=38.505 Az status=0009 Ze status=0008 06:42:27 Check angles 06:42:27 SkyScan query 06:42:28 SkyScan query done: ret=0 az=144.33<-9622 ze=38.505<-9433 Statuses=0009 0008 06:42:28 Msec=1500 True Az=144.33 Ze=38.505 Az status=0009 Ze status=0008 06:42:28 Check angles 06:42:28 SkyScan query 06:42:29 SkyScan query done: ret=0 az=161.745<-10783 ze=38.505<-9433 Statuses=0009 0008 06:42:29 Msec=2250 True Az=161.745 Ze=38.505 Az status=0009 Ze status=0008 06:42:29 Check angles 06:42:29 SkyScan query 06:42:29 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 06:42:29 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 06:42:30 Check angles 06:42:30 SkyScan query 06:42:30 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:42:30 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:42:30 Message to Master queued w/err=0: serial=56338 error=0 06:42:35 Received message from Master: op=Filter serial=56339 06:42:35 Color wheel filter change from 0 to 0 06:42:35 FLIGetFilterPos err=0 currentPosition=0 06:42:35 FLIGetStepsRemaining err=0 RemainingSteps=0 06:42:35 Filter is already there-color wheel unchanged 06:42:35 Received message from Master: op=Shutter serial=56340 06:42:35 Shutter LASER close 06:42:35 Received message from Camera: op=State serial=56342 06:42:35 GetSingleValue result=40 Value=cccccccc 06:42:35 SkyScan query 06:42:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:42:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:36 Parameters OK 06:42:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:36 Set A/D data flow result=40 06:42:36 Set A/D channel type result=40 06:42:36 Set A/D encoding result=40 06:42:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:36 Set channel filter=0.000000e+000 result=40 06:42:36 Config A/D Result=40 06:42:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:36 Get A/D filter: -9.255963e+061 result=40 06:42:36 Get A/D value=-858993460 result=40 06:42:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:36 Parameters OK 06:42:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:36 Set A/D data flow result=40 06:42:36 Set A/D channel type result=40 06:42:36 Set A/D encoding result=40 06:42:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:36 Set channel filter=0.000000e+000 result=40 06:42:36 Config A/D Result=40 06:42:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:36 Get A/D filter: -9.255963e+061 result=40 06:42:36 Get A/D value=-858993460 result=40 06:42:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:42:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:42:36 Aux= 06:42:36 Message to Camera, serial 56342 queued 06:43:13 Received message from Master: op=PointingHead serial=56355 06:43:13 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:43:13 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:43:13 Point started: ret=0 06:43:13 point_skyscan result=0 06:43:14 Check angles 06:43:14 SkyScan query 06:43:15 SkyScan query done: ret=0 az=152.7<-10180 ze=8.22<-11452 Statuses=0009 0009 06:43:15 Msec=0 True Az=152.7 Ze=8.22 Az status=0009 Ze status=0009 06:43:15 Check angles 06:43:15 SkyScan query 06:43:15 SkyScan query done: ret=0 az=135.225<-9015 ze=-12.66<-12844 Statuses=0009 0009 06:43:15 Msec=750 True Az=135.225 Ze=-12.66 Az status=0009 Ze status=0009 06:43:15 Check angles 06:43:15 SkyScan query 06:43:16 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.645<-14243 Statuses=0009 0009 06:43:16 Msec=1500 True Az=117.57 Ze=-33.645 Az status=0009 Ze status=0009 06:43:16 Check angles 06:43:16 SkyScan query 06:43:17 SkyScan query done: ret=0 az=99.915<-6661 ze=-51.57<-15438 Statuses=0009 0009 06:43:17 Msec=2250 True Az=99.915 Ze=-51.57 Az status=0009 Ze status=0009 06:43:17 Check angles 06:43:17 SkyScan query 06:43:18 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.525<-15435 Statuses=0009 0008 06:43:18 Msec=3000 True Az=86.055 Ze=-51.525 Az status=0009 Ze status=0008 06:43:18 Check angles 06:43:18 SkyScan query 06:43:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:43:18 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:43:18 Message to Master queued w/err=0: serial=56355 error=0 06:43:23 Received message from Master: op=Filter serial=56356 06:43:23 Color wheel filter change from 0 to 0 06:43:23 FLIGetFilterPos err=0 currentPosition=0 06:43:23 FLIGetStepsRemaining err=0 RemainingSteps=0 06:43:23 Filter is already there-color wheel unchanged 06:43:23 Received message from Master: op=Shutter serial=56357 06:43:23 Shutter LASER close 06:43:23 Received message from Camera: op=State serial=56359 06:43:23 GetSingleValue result=40 Value=cccccccc 06:43:23 SkyScan query 06:43:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:43:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:24 Parameters OK 06:43:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:24 Set A/D data flow result=40 06:43:24 Set A/D channel type result=40 06:43:24 Set A/D encoding result=40 06:43:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:24 Set channel filter=0.000000e+000 result=40 06:43:24 Config A/D Result=40 06:43:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:24 Get A/D filter: -9.255963e+061 result=40 06:43:24 Get A/D value=-858993460 result=40 06:43:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:24 Parameters OK 06:43:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:24 Set A/D data flow result=40 06:43:24 Set A/D channel type result=40 06:43:24 Set A/D encoding result=40 06:43:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:24 Set channel filter=0.000000e+000 result=40 06:43:24 Config A/D Result=40 06:43:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:24 Get A/D filter: -9.255963e+061 result=40 06:43:24 Get A/D value=-858993460 result=40 06:43:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:43:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:43:24 Aux= 06:43:24 Message to Camera, serial 56359 queued 06:44:01 Received message from Master: op=PointingHead serial=56372 06:44:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:44:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:44:01 Point started: ret=0 06:44:01 point_skyscan result=0 06:44:02 Check angles 06:44:02 SkyScan query 06:44:03 SkyScan query done: ret=0 az=108.945<-7263 ze=-81.255<-17417 Statuses=0009 0009 06:44:03 Msec=0 True Az=108.945 Ze=-81.255 Az status=0009 Ze status=0009 06:44:03 Check angles 06:44:03 SkyScan query 06:44:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.645<-18843 Statuses=0008 0009 06:44:03 Msec=750 True Az=112.995 Ze=-102.645 Az status=0008 Ze status=0009 06:44:04 Check angles 06:44:04 SkyScan query 06:44:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.6<-20240 Statuses=0008 0009 06:44:04 Msec=1500 True Az=112.995 Ze=-123.6 Az status=0008 Ze status=0009 06:44:04 Check angles 06:44:04 SkyScan query 06:44:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.54<-21636 Statuses=0008 0009 06:44:05 Msec=2250 True Az=112.995 Ze=-144.54 Az status=0008 Ze status=0009 06:44:05 Check angles 06:44:05 SkyScan query 06:44:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.495<-23033 Statuses=0008 0009 06:44:06 Msec=3000 True Az=112.995 Ze=-165.495 Az status=0008 Ze status=0009 06:44:06 Check angles 06:44:06 SkyScan query 06:44:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:44:06 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:44:06 Message to Master queued w/err=0: serial=56372 error=0 06:44:11 Received message from Master: op=Filter serial=56373 06:44:11 Color wheel filter change from 0 to 0 06:44:11 FLIGetFilterPos err=0 currentPosition=0 06:44:11 FLIGetStepsRemaining err=0 RemainingSteps=0 06:44:11 Filter is already there-color wheel unchanged 06:44:12 Received message from Master: op=Shutter serial=56374 06:44:12 Shutter LASER open 06:44:12 Received message from Camera: op=State serial=56376 06:44:12 GetSingleValue result=40 Value=cccccccc 06:44:12 SkyScan query 06:44:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:44:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:12 Parameters OK 06:44:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:12 Set A/D data flow result=40 06:44:12 Set A/D channel type result=40 06:44:12 Set A/D encoding result=40 06:44:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:12 Set channel filter=0.000000e+000 result=40 06:44:12 Config A/D Result=40 06:44:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:12 Get A/D filter: -9.255963e+061 result=40 06:44:12 Get A/D value=-858993460 result=40 06:44:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:12 Parameters OK 06:44:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:12 Set A/D data flow result=40 06:44:12 Set A/D channel type result=40 06:44:12 Set A/D encoding result=40 06:44:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:12 Set channel filter=0.000000e+000 result=40 06:44:12 Config A/D Result=40 06:44:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:12 Get A/D filter: -9.255963e+061 result=40 06:44:12 Get A/D value=-858993460 result=40 06:44:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:44:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:44:12 Aux= 06:44:12 Message to Camera, serial 56376 queued 06:44:21 Received message from Master: op=Shutter serial=56386 06:44:21 Shutter LASER close 06:44:21 Received message from Master: op=PointingHead serial=56390 06:44:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:44:21 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:44:21 Point started: ret=0 06:44:21 point_skyscan result=0 06:44:22 Check angles 06:44:22 SkyScan query 06:44:23 SkyScan query done: ret=0 az=89.895<-5993 ze=157.2<-1520 Statuses=0009 0009 06:44:23 Msec=0 True Az=89.895 Ze=157.2 Az status=0009 Ze status=0009 06:44:23 Check angles 06:44:23 SkyScan query 06:44:24 SkyScan query done: ret=0 az=72.3<-4820 ze=136.2<-2920 Statuses=0009 0009 06:44:24 Msec=750 True Az=72.3 Ze=136.2 Az status=0009 Ze status=0009 06:44:24 Check angles 06:44:24 SkyScan query 06:44:24 SkyScan query done: ret=0 az=54.99<-3666 ze=115.305<-4313 Statuses=0009 0009 06:44:24 Msec=1500 True Az=54.99 Ze=115.305 Az status=0009 Ze status=0009 06:44:24 Check angles 06:44:24 SkyScan query 06:44:25 SkyScan query done: ret=0 az=40.875<-2725 ze=94.275<-5715 Statuses=0009 0009 06:44:25 Msec=2250 True Az=40.875 Ze=94.275 Az status=0009 Ze status=0009 06:44:25 Check angles 06:44:25 SkyScan query 06:44:26 SkyScan query done: ret=0 az=40.995<-2733 ze=73.365<-7109 Statuses=0008 0009 06:44:26 Msec=3000 True Az=40.995 Ze=73.365 Az status=0008 Ze status=0009 06:44:26 Check angles 06:44:26 SkyScan query 06:44:27 SkyScan query done: ret=0 az=40.995<-2733 ze=52.785<-8481 Statuses=0008 0009 06:44:27 Msec=3750 True Az=40.995 Ze=52.785 Az status=0008 Ze status=0009 06:44:27 Check angles 06:44:27 SkyScan query 06:44:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:44:27 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:44:27 Message to Master queued w/err=0: serial=56390 error=0 06:44:32 Received message from Master: op=Filter serial=56391 06:44:32 Color wheel filter change from 0 to 0 06:44:32 FLIGetFilterPos err=0 currentPosition=0 06:44:32 FLIGetStepsRemaining err=0 RemainingSteps=0 06:44:32 Filter is already there-color wheel unchanged 06:44:32 Received message from Master: op=Shutter serial=56392 06:44:32 Shutter LASER close 06:44:33 Received message from Camera: op=State serial=56394 06:44:33 GetSingleValue result=40 Value=cccccccc 06:44:33 SkyScan query 06:44:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:44:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:33 Parameters OK 06:44:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:33 Set A/D data flow result=40 06:44:33 Set A/D channel type result=40 06:44:33 Set A/D encoding result=40 06:44:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:33 Set channel filter=0.000000e+000 result=40 06:44:33 Config A/D Result=40 06:44:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:33 Get A/D filter: -9.255963e+061 result=40 06:44:33 Get A/D value=-858993460 result=40 06:44:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:33 Parameters OK 06:44:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:33 Set A/D data flow result=40 06:44:33 Set A/D channel type result=40 06:44:33 Set A/D encoding result=40 06:44:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:33 Set channel filter=0.000000e+000 result=40 06:44:33 Config A/D Result=40 06:44:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:33 Get A/D filter: -9.255963e+061 result=40 06:44:33 Get A/D value=-858993460 result=40 06:44:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:44:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:44:33 Aux= 06:44:33 Message to Camera, serial 56394 queued 06:45:10 Received message from Master: op=PointingHead serial=56407 06:45:10 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:45:10 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:45:10 Point started: ret=0 06:45:10 point_skyscan result=0 06:45:11 Check angles 06:45:11 SkyScan query 06:45:12 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 06:45:12 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 06:45:12 Check angles 06:45:12 SkyScan query 06:45:12 SkyScan query done: ret=0 az=81.705<-5447 ze=66.495<-7567 Statuses=0009 0008 06:45:12 Msec=750 True Az=81.705 Ze=66.495 Az status=0009 Ze status=0008 06:45:13 Check angles 06:45:13 SkyScan query 06:45:13 SkyScan query done: ret=0 az=99.765<-6651 ze=66.495<-7567 Statuses=0009 0008 06:45:13 Msec=1500 True Az=99.765 Ze=66.495 Az status=0009 Ze status=0008 06:45:13 Check angles 06:45:13 SkyScan query 06:45:14 SkyScan query done: ret=0 az=117.24<-7816 ze=66.495<-7567 Statuses=0009 0008 06:45:14 Msec=2250 True Az=117.24 Ze=66.495 Az status=0009 Ze status=0008 06:45:14 Check angles 06:45:14 SkyScan query 06:45:15 SkyScan query done: ret=0 az=134.64<-8976 ze=66.495<-7567 Statuses=0009 0008 06:45:15 Msec=3000 True Az=134.64 Ze=66.495 Az status=0009 Ze status=0008 06:45:15 Check angles 06:45:15 SkyScan query 06:45:16 SkyScan query done: ret=0 az=152.505<-10167 ze=66.495<-7567 Statuses=0009 0008 06:45:16 Msec=3750 True Az=152.505 Ze=66.495 Az status=0009 Ze status=0008 06:45:16 Check angles 06:45:16 SkyScan query 06:45:16 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:45:16 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 06:45:16 Message to Master queued w/err=0: serial=56407 error=0 06:45:21 Received message from Master: op=Filter serial=56408 06:45:21 Color wheel filter change from 0 to 0 06:45:21 FLIGetFilterPos err=0 currentPosition=0 06:45:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:45:21 Filter is already there-color wheel unchanged 06:45:21 Received message from Master: op=Shutter serial=56409 06:45:21 Shutter LASER close 06:45:21 Received message from Camera: op=State serial=56411 06:45:21 GetSingleValue result=40 Value=cccccccc 06:45:21 SkyScan query 06:45:22 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:45:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:22 Parameters OK 06:45:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:22 Set A/D data flow result=40 06:45:22 Set A/D channel type result=40 06:45:22 Set A/D encoding result=40 06:45:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:22 Set channel filter=0.000000e+000 result=40 06:45:22 Config A/D Result=40 06:45:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:22 Get A/D filter: -9.255963e+061 result=40 06:45:22 Get A/D value=-858993460 result=40 06:45:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:22 Parameters OK 06:45:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:22 Set A/D data flow result=40 06:45:22 Set A/D channel type result=40 06:45:22 Set A/D encoding result=40 06:45:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:22 Set channel filter=0.000000e+000 result=40 06:45:22 Config A/D Result=40 06:45:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:22 Get A/D filter: -9.255963e+061 result=40 06:45:22 Get A/D value=-858993460 result=40 [UTC 2018-12-11 06:45:22] 06:45:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:22 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:45:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:45:22 Aux= 06:45:22 Message to Camera, serial 56411 queued 06:45:29 Received message from Master: op=Identify serial=56412 06:45:59 Received message from Master: op=PointingHead serial=56427 06:45:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:45:59 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:45:59 Point started: ret=0 06:45:59 point_skyscan result=0 06:46:00 Check angles 06:46:00 SkyScan query 06:46:01 SkyScan query done: ret=0 az=134.82<-8988 ze=36.555<-9563 Statuses=0009 0009 06:46:01 Msec=0 True Az=134.82 Ze=36.555 Az status=0009 Ze status=0009 06:46:01 Check angles 06:46:01 SkyScan query 06:46:01 SkyScan query done: ret=0 az=117.045<-7803 ze=15.27<-10982 Statuses=0009 0009 06:46:01 Msec=750 True Az=117.045 Ze=15.27 Az status=0009 Ze status=0009 06:46:02 Check angles 06:46:02 SkyScan query 06:46:02 SkyScan query done: ret=0 az=99.69<-6646 ze=-5.7<-12380 Statuses=0009 0009 06:46:02 Msec=1500 True Az=99.69 Ze=-5.7 Az status=0009 Ze status=0009 06:46:02 Check angles 06:46:02 SkyScan query 06:46:03 SkyScan query done: ret=0 az=82.215<-5481 ze=-26.67<-13778 Statuses=0009 0009 06:46:03 Msec=2250 True Az=82.215 Ze=-26.67 Az status=0009 Ze status=0009 06:46:03 Check angles 06:46:03 SkyScan query 06:46:04 SkyScan query done: ret=0 az=64.23<-4282 ze=-38.565<-14571 Statuses=0009 0008 06:46:04 Msec=3000 True Az=64.23 Ze=-38.565 Az status=0009 Ze status=0008 06:46:04 Check angles 06:46:04 SkyScan query 06:46:04 SkyScan query done: ret=0 az=46.905<-3127 ze=-38.535<-14569 Statuses=0009 0008 06:46:04 Msec=3750 True Az=46.905 Ze=-38.535 Az status=0009 Ze status=0008 06:46:05 Check angles 06:46:05 SkyScan query 06:46:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:46:05 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:46:05 Message to Master queued w/err=0: serial=56427 error=0 06:46:10 Received message from Master: op=Filter serial=56428 06:46:10 Color wheel filter change from 0 to 0 06:46:10 FLIGetFilterPos err=0 currentPosition=0 06:46:10 FLIGetStepsRemaining err=0 RemainingSteps=0 06:46:10 Filter is already there-color wheel unchanged 06:46:10 Received message from Master: op=Shutter serial=56429 06:46:10 Shutter LASER close 06:46:10 Received message from Camera: op=State serial=56431 06:46:10 GetSingleValue result=40 Value=cccccccc 06:46:10 SkyScan query 06:46:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:46:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:11 Parameters OK 06:46:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:11 Set A/D data flow result=40 06:46:11 Set A/D channel type result=40 06:46:11 Set A/D encoding result=40 06:46:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:11 Set channel filter=0.000000e+000 result=40 06:46:11 Config A/D Result=40 06:46:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:11 Get A/D filter: -9.255963e+061 result=40 06:46:11 Get A/D value=-858993460 result=40 06:46:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:11 Parameters OK 06:46:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:11 Set A/D data flow result=40 06:46:11 Set A/D channel type result=40 06:46:11 Set A/D encoding result=40 06:46:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:11 Set channel filter=0.000000e+000 result=40 06:46:11 Config A/D Result=40 06:46:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:11 Get A/D filter: -9.255963e+061 result=40 06:46:11 Get A/D value=-858993460 result=40 06:46:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:46:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:46:11 Aux= 06:46:11 Message to Camera, serial 56431 queued 06:46:48 Received message from Master: op=PointingHead serial=56444 06:46:48 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:46:48 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:46:48 Point started: ret=0 06:46:48 point_skyscan result=0 06:46:49 Check angles 06:46:49 SkyScan query 06:46:49 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.58<-16572 Statuses=0009 0009 06:46:49 Msec=0 True Az=64.23 Ze=-68.58 Az status=0009 Ze status=0009 06:46:50 Check angles 06:46:50 SkyScan query 06:46:50 SkyScan query done: ret=0 az=82.02<-5468 ze=-89.985<-17999 Statuses=0009 0009 06:46:50 Msec=750 True Az=82.02 Ze=-89.985 Az status=0009 Ze status=0009 06:46:50 Check angles 06:46:50 SkyScan query 06:46:51 SkyScan query done: ret=0 az=99.63<-6642 ze=-110.94<-19396 Statuses=0009 0009 06:46:51 Msec=1500 True Az=99.63 Ze=-110.94 Az status=0009 Ze status=0009 06:46:51 Check angles 06:46:51 SkyScan query 06:46:52 SkyScan query done: ret=0 az=117.09<-7806 ze=-131.88<-20792 Statuses=0009 0009 06:46:52 Msec=2250 True Az=117.09 Ze=-131.88 Az status=0009 Ze status=0009 06:46:52 Check angles 06:46:52 SkyScan query 06:46:52 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 06:46:52 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 06:46:53 Check angles 06:46:53 SkyScan query 06:46:53 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:46:53 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:46:53 Message to Master queued w/err=0: serial=56444 error=0 06:46:58 Received message from Master: op=Filter serial=56445 06:46:58 Color wheel filter change from 0 to 0 06:46:58 FLIGetFilterPos err=0 currentPosition=0 06:46:58 FLIGetStepsRemaining err=0 RemainingSteps=0 06:46:58 Filter is already there-color wheel unchanged 06:46:58 Received message from Master: op=Shutter serial=56446 06:46:58 Shutter LASER close 06:46:58 Received message from Camera: op=State serial=56448 06:46:58 GetSingleValue result=40 Value=cccccccc 06:46:58 SkyScan query 06:46:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:46:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:59 Parameters OK 06:46:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:59 Set A/D data flow result=40 06:46:59 Set A/D channel type result=40 06:46:59 Set A/D encoding result=40 06:46:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:59 Set channel filter=0.000000e+000 result=40 06:46:59 Config A/D Result=40 06:46:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:59 Get A/D filter: -9.255963e+061 result=40 06:46:59 Get A/D value=-858993460 result=40 06:46:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:59 Parameters OK 06:46:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:59 Set A/D data flow result=40 06:46:59 Set A/D channel type result=40 06:46:59 Set A/D encoding result=40 06:46:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:59 Set channel filter=0.000000e+000 result=40 06:46:59 Config A/D Result=40 06:46:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:59 Get A/D filter: -9.255963e+061 result=40 06:46:59 Get A/D value=-858993460 result=40 06:46:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:59 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:46:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:46:59 Aux= 06:46:59 Message to Camera, serial 56448 queued 06:47:36 Received message from Master: op=PointingHead serial=56461 06:47:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:47:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:47:36 Point started: ret=0 06:47:36 point_skyscan result=0 06:47:37 Check angles 06:47:37 SkyScan query 06:47:38 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.315<-23421 Statuses=0009 0009 06:47:38 Msec=0 True Az=113.01 Ze=-171.315 Az status=0009 Ze status=0009 06:47:38 Check angles 06:47:38 SkyScan query 06:47:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:47:38 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:47:38 Message to Master queued w/err=0: serial=56461 error=0 06:47:43 Received message from Master: op=Filter serial=56462 06:47:43 Color wheel filter change from 0 to 0 06:47:43 FLIGetFilterPos err=0 currentPosition=0 06:47:43 FLIGetStepsRemaining err=0 RemainingSteps=0 06:47:43 Filter is already there-color wheel unchanged 06:47:44 Received message from Master: op=Shutter serial=56463 06:47:44 Shutter LASER open 06:47:44 Received message from Camera: op=State serial=56465 06:47:44 GetSingleValue result=40 Value=cccccccc 06:47:44 SkyScan query 06:47:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:47:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:44 Parameters OK 06:47:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:44 Set A/D data flow result=40 06:47:44 Set A/D channel type result=40 06:47:44 Set A/D encoding result=40 06:47:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:44 Set channel filter=0.000000e+000 result=40 06:47:44 Config A/D Result=40 06:47:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:44 Get A/D filter: -9.255963e+061 result=40 06:47:44 Get A/D value=-858993460 result=40 06:47:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:44 Parameters OK 06:47:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:44 Set A/D data flow result=40 06:47:44 Set A/D channel type result=40 06:47:44 Set A/D encoding result=40 06:47:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:44 Set channel filter=0.000000e+000 result=40 06:47:44 Config A/D Result=40 06:47:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:44 Get A/D filter: -9.255963e+061 result=40 06:47:44 Get A/D value=-858993460 result=40 06:47:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:47:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:47:44 Aux= 06:47:44 Message to Camera, serial 56465 queued 06:47:53 Received message from Master: op=Shutter serial=56475 06:47:53 Shutter LASER close 06:47:53 Received message from Master: op=PointingHead serial=56479 06:47:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:47:53 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:47:54 Point started: ret=0 06:47:54 point_skyscan result=0 06:47:54 Check angles 06:47:54 SkyScan query 06:47:55 SkyScan query done: ret=0 az=135.99<-9066 ze=-143.115<-21541 Statuses=0009 0009 06:47:55 Msec=0 True Az=135.99 Ze=-143.115 Az status=0009 Ze status=0009 06:47:55 Check angles 06:47:55 SkyScan query 06:47:56 SkyScan query done: ret=0 az=153.87<-10258 ze=-121.725<-20115 Statuses=0009 0009 06:47:56 Msec=750 True Az=153.87 Ze=-121.725 Az status=0009 Ze status=0009 06:47:56 Check angles 06:47:56 SkyScan query 06:47:57 SkyScan query done: ret=0 az=171.42<-11428 ze=-100.74<-18716 Statuses=0009 0009 06:47:57 Msec=1500 True Az=171.42 Ze=-100.74 Az status=0009 Ze status=0009 06:47:57 Check angles 06:47:57 SkyScan query 06:47:57 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.86<-17324 Statuses=0008 0009 06:47:57 Msec=2250 True Az=176.025 Ze=-79.86 Az status=0008 Ze status=0009 06:47:57 Check angles 06:47:57 SkyScan query 06:47:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.875<-15925 Statuses=0008 0009 06:47:58 Msec=3000 True Az=175.995 Ze=-58.875 Az status=0008 Ze status=0009 06:47:58 Check angles 06:47:58 SkyScan query 06:47:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 06:47:59 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 06:47:59 Message to Master queued w/err=0: serial=56479 error=0 06:48:04 Received message from Master: op=Filter serial=56480 06:48:04 Color wheel filter change from 0 to 0 06:48:04 FLIGetFilterPos err=0 currentPosition=0 06:48:04 FLIGetStepsRemaining err=0 RemainingSteps=0 06:48:04 Filter is already there-color wheel unchanged 06:48:04 Received message from Master: op=Shutter serial=56481 06:48:04 Shutter LASER close 06:48:04 Received message from Camera: op=State serial=56483 06:48:04 GetSingleValue result=40 Value=cccccccc 06:48:04 SkyScan query 06:48:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:48:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:05 Parameters OK 06:48:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:05 Set A/D data flow result=40 06:48:05 Set A/D channel type result=40 06:48:05 Set A/D encoding result=40 06:48:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:05 Set channel filter=0.000000e+000 result=40 06:48:05 Config A/D Result=40 06:48:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:05 Get A/D filter: -9.255963e+061 result=40 06:48:05 Get A/D value=-858993460 result=40 06:48:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:05 Parameters OK 06:48:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:05 Set A/D data flow result=40 06:48:05 Set A/D channel type result=40 06:48:05 Set A/D encoding result=40 06:48:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:05 Set channel filter=0.000000e+000 result=40 06:48:05 Config A/D Result=40 06:48:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:05 Get A/D filter: -9.255963e+061 result=40 06:48:05 Get A/D value=-858993460 result=40 06:48:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:48:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:48:05 Aux= 06:48:05 Message to Camera, serial 56483 queued 06:48:42 Received message from Master: op=PointingHead serial=56496 06:48:42 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:48:42 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:48:42 Point started: ret=0 06:48:42 point_skyscan result=0 06:48:43 Check angles 06:48:43 SkyScan query 06:48:43 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.855<-13457 Statuses=0009 0009 06:48:43 Msec=0 True Az=152.97 Ze=-21.855 Az status=0009 Ze status=0009 06:48:43 Check angles 06:48:43 SkyScan query 06:48:44 SkyScan query done: ret=0 az=135.285<-9019 ze=-0.405<-12027 Statuses=0009 0009 06:48:44 Msec=750 True Az=135.285 Ze=-0.405 Az status=0009 Ze status=0009 06:48:44 Check angles 06:48:44 SkyScan query 06:48:45 SkyScan query done: ret=0 az=117.57<-7838 ze=20.52<-10632 Statuses=0009 0009 06:48:45 Msec=1500 True Az=117.57 Ze=20.52 Az status=0009 Ze status=0009 06:48:45 Check angles 06:48:45 SkyScan query 06:48:45 SkyScan query done: ret=0 az=100.17<-6678 ze=41.52<-9232 Statuses=0009 0009 06:48:45 Msec=2250 True Az=100.17 Ze=41.52 Az status=0009 Ze status=0009 06:48:46 Check angles 06:48:46 SkyScan query 06:48:46 SkyScan query done: ret=0 az=86.055<-5737 ze=51.54<-8564 Statuses=0009 0008 06:48:46 Msec=3000 True Az=86.055 Ze=51.54 Az status=0009 Ze status=0008 06:48:46 Check angles 06:48:46 SkyScan query 06:48:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:48:47 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:48:47 Message to Master queued w/err=0: serial=56496 error=0 06:48:52 Received message from Master: op=Filter serial=56497 06:48:52 Color wheel filter change from 0 to 0 06:48:52 FLIGetFilterPos err=0 currentPosition=0 06:48:52 FLIGetStepsRemaining err=0 RemainingSteps=0 06:48:52 Filter is already there-color wheel unchanged 06:48:52 Received message from Master: op=Shutter serial=56498 06:48:52 Shutter LASER close 06:48:52 Received message from Camera: op=State serial=56500 06:48:52 GetSingleValue result=40 Value=cccccccc 06:48:52 SkyScan query 06:48:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:48:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:53 Parameters OK 06:48:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:53 Set A/D data flow result=40 06:48:53 Set A/D channel type result=40 06:48:53 Set A/D encoding result=40 06:48:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:53 Set channel filter=0.000000e+000 result=40 06:48:53 Config A/D Result=40 06:48:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:53 Get A/D filter: -9.255963e+061 result=40 06:48:53 Get A/D value=-858993460 result=40 06:48:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:53 Parameters OK 06:48:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:53 Set A/D data flow result=40 06:48:53 Set A/D channel type result=40 06:48:53 Set A/D encoding result=40 06:48:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:53 Set channel filter=0.000000e+000 result=40 06:48:53 Config A/D Result=40 06:48:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:53 Get A/D filter: -9.255963e+061 result=40 06:48:53 Get A/D value=-858993460 result=40 06:48:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:48:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:48:53 Aux= 06:48:53 Message to Camera, serial 56500 queued 06:49:30 Received message from Master: op=PointingHead serial=56513 06:49:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:49:30 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:49:30 Point started: ret=0 06:49:30 point_skyscan result=0 06:49:31 Check angles 06:49:31 SkyScan query 06:49:31 SkyScan query done: ret=0 az=108.945<-7263 ze=38.49<-9434 Statuses=0009 0008 06:49:31 Msec=0 True Az=108.945 Ze=38.49 Az status=0009 Ze status=0008 06:49:31 Check angles 06:49:31 SkyScan query 06:49:32 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 06:49:32 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 06:49:32 Check angles 06:49:32 SkyScan query 06:49:33 SkyScan query done: ret=0 az=143.955<-9597 ze=38.505<-9433 Statuses=0009 0008 06:49:33 Msec=1500 True Az=143.955 Ze=38.505 Az status=0009 Ze status=0008 06:49:33 Check angles 06:49:33 SkyScan query 06:49:34 SkyScan query done: ret=0 az=161.28<-10752 ze=38.505<-9433 Statuses=0009 0008 06:49:34 Msec=2250 True Az=161.28 Ze=38.505 Az status=0009 Ze status=0008 06:49:34 Check angles 06:49:34 SkyScan query 06:49:34 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 06:49:34 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 06:49:34 Check angles 06:49:34 SkyScan query 06:49:35 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:49:35 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:49:35 Message to Master queued w/err=0: serial=56513 error=0 06:49:40 Received message from Master: op=Filter serial=56514 06:49:40 Color wheel filter change from 0 to 0 06:49:40 FLIGetFilterPos err=0 currentPosition=0 06:49:40 FLIGetStepsRemaining err=0 RemainingSteps=0 06:49:40 Filter is already there-color wheel unchanged 06:49:40 Received message from Master: op=Shutter serial=56515 06:49:40 Shutter LASER close 06:49:40 Received message from Camera: op=State serial=56517 06:49:40 GetSingleValue result=40 Value=cccccccc 06:49:40 SkyScan query 06:49:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:49:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:41 Parameters OK 06:49:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:41 Set A/D data flow result=40 06:49:41 Set A/D channel type result=40 06:49:41 Set A/D encoding result=40 06:49:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:41 Set channel filter=0.000000e+000 result=40 06:49:41 Config A/D Result=40 06:49:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:41 Get A/D filter: -9.255963e+061 result=40 06:49:41 Get A/D value=-858993460 result=40 06:49:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:41 Parameters OK 06:49:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:41 Set A/D data flow result=40 06:49:41 Set A/D channel type result=40 06:49:41 Set A/D encoding result=40 06:49:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:41 Set channel filter=0.000000e+000 result=40 06:49:41 Config A/D Result=40 06:49:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:41 Get A/D filter: -9.255963e+061 result=40 06:49:41 Get A/D value=-858993460 result=40 06:49:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:49:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:49:41 Aux= 06:49:41 Message to Camera, serial 56517 queued 06:50:18 Received message from Master: op=PointingHead serial=56530 06:50:18 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:50:18 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:50:18 Point started: ret=0 06:50:18 point_skyscan result=0 06:50:19 Check angles 06:50:19 SkyScan query 06:50:19 SkyScan query done: ret=0 az=152.625<-10175 ze=8.145<-11457 Statuses=0009 0009 06:50:19 Msec=0 True Az=152.625 Ze=8.145 Az status=0009 Ze status=0009 06:50:20 Check angles 06:50:20 SkyScan query 06:50:20 SkyScan query done: ret=0 az=135.12<-9008 ze=-12.795<-12853 Statuses=0009 0009 06:50:20 Msec=750 True Az=135.12 Ze=-12.795 Az status=0009 Ze status=0009 06:50:20 Check angles 06:50:20 SkyScan query 06:50:21 SkyScan query done: ret=0 az=117.525<-7835 ze=-33.735<-14249 Statuses=0009 0009 06:50:21 Msec=1500 True Az=117.525 Ze=-33.735 Az status=0009 Ze status=0009 06:50:21 Check angles 06:50:21 SkyScan query 06:50:22 SkyScan query done: ret=0 az=100.155<-6677 ze=-51.57<-15438 Statuses=0009 0009 06:50:22 Msec=2250 True Az=100.155 Ze=-51.57 Az status=0009 Ze status=0009 06:50:22 Check angles 06:50:22 SkyScan query 06:50:22 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 06:50:22 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 06:50:23 Check angles 06:50:23 SkyScan query 06:50:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:50:23 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:50:23 Message to Master queued w/err=0: serial=56530 error=0 06:50:28 Received message from Master: op=Filter serial=56531 06:50:28 Color wheel filter change from 0 to 0 06:50:28 FLIGetFilterPos err=0 currentPosition=0 06:50:28 FLIGetStepsRemaining err=0 RemainingSteps=0 06:50:28 Filter is already there-color wheel unchanged 06:50:28 Received message from Master: op=Shutter serial=56532 06:50:28 Shutter LASER close 06:50:28 Received message from Camera: op=State serial=56534 06:50:28 GetSingleValue result=40 Value=cccccccc 06:50:28 SkyScan query 06:50:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:50:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:29 Parameters OK 06:50:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:29 Set A/D data flow result=40 06:50:29 Set A/D channel type result=40 06:50:29 Set A/D encoding result=40 06:50:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:29 Set channel filter=0.000000e+000 result=40 06:50:29 Config A/D Result=40 06:50:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:29 Get A/D filter: -9.255963e+061 result=40 06:50:29 Get A/D value=-858993460 result=40 06:50:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:29 Parameters OK 06:50:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:29 Set A/D data flow result=40 06:50:29 Set A/D channel type result=40 06:50:29 Set A/D encoding result=40 06:50:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:29 Set channel filter=0.000000e+000 result=40 06:50:29 Config A/D Result=40 06:50:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:29 Get A/D filter: -9.255963e+061 result=40 06:50:29 Get A/D value=-858993460 result=40 06:50:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:50:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:50:29 Aux= 06:50:29 Message to Camera, serial 56534 queued 06:51:06 Received message from Master: op=PointingHead serial=56547 06:51:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:51:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:51:06 Point started: ret=0 06:51:06 point_skyscan result=0 06:51:07 Check angles 06:51:07 SkyScan query 06:51:07 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.54<-17436 Statuses=0009 0009 06:51:07 Msec=0 True Az=109.2 Ze=-81.54 Az status=0009 Ze status=0009 06:51:08 Check angles 06:51:08 SkyScan query 06:51:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.465<-18831 Statuses=0008 0009 06:51:08 Msec=750 True Az=112.995 Ze=-102.465 Az status=0008 Ze status=0009 06:51:08 Check angles 06:51:08 SkyScan query 06:51:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.435<-20229 Statuses=0008 0009 06:51:09 Msec=1500 True Az=112.995 Ze=-123.435 Az status=0008 Ze status=0009 06:51:09 Check angles 06:51:09 SkyScan query 06:51:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.81<-21654 Statuses=0008 0009 06:51:10 Msec=2250 True Az=112.995 Ze=-144.81 Az status=0008 Ze status=0009 06:51:10 Check angles 06:51:10 SkyScan query 06:51:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.75<-23050 Statuses=0008 0009 06:51:10 Msec=3000 True Az=112.995 Ze=-165.75 Az status=0008 Ze status=0009 06:51:11 Check angles 06:51:11 SkyScan query 06:51:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:51:11 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:51:11 Message to Master queued w/err=0: serial=56547 error=0 06:51:16 Received message from Master: op=Filter serial=56548 06:51:16 Color wheel filter change from 0 to 0 06:51:16 FLIGetFilterPos err=0 currentPosition=0 06:51:16 FLIGetStepsRemaining err=0 RemainingSteps=0 06:51:16 Filter is already there-color wheel unchanged 06:51:16 Received message from Master: op=Shutter serial=56549 06:51:16 Shutter LASER open 06:51:17 Received message from Camera: op=State serial=56551 06:51:17 GetSingleValue result=40 Value=cccccccc 06:51:17 SkyScan query 06:51:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:51:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:17 Parameters OK 06:51:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:17 Set A/D data flow result=40 06:51:17 Set A/D channel type result=40 06:51:17 Set A/D encoding result=40 06:51:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:17 Set channel filter=0.000000e+000 result=40 06:51:17 Config A/D Result=40 06:51:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:17 Get A/D filter: -9.255963e+061 result=40 06:51:17 Get A/D value=-858993460 result=40 06:51:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:17 Parameters OK 06:51:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:17 Set A/D data flow result=40 06:51:17 Set A/D channel type result=40 06:51:17 Set A/D encoding result=40 06:51:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:17 Set channel filter=0.000000e+000 result=40 06:51:17 Config A/D Result=40 06:51:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:17 Get A/D filter: -9.255963e+061 result=40 06:51:17 Get A/D value=-858993460 result=40 06:51:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:51:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:51:17 Aux= 06:51:17 Message to Camera, serial 56551 queued 06:51:26 Received message from Master: op=Shutter serial=56561 06:51:26 Shutter LASER close 06:51:26 Received message from Master: op=PointingHead serial=56565 06:51:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:51:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:51:26 Point started: ret=0 06:51:26 point_skyscan result=0 06:51:27 Check angles 06:51:27 SkyScan query 06:51:28 SkyScan query done: ret=0 az=89.895<-5993 ze=157.23<-1518 Statuses=0009 0009 06:51:28 Msec=0 True Az=89.895 Ze=157.23 Az status=0009 Ze status=0009 06:51:28 Check angles 06:51:28 SkyScan query 06:51:28 SkyScan query done: ret=0 az=72.3<-4820 ze=136.275<-2915 Statuses=0009 0009 06:51:28 Msec=750 True Az=72.3 Ze=136.275 Az status=0009 Ze status=0009 06:51:29 Check angles 06:51:29 SkyScan query 06:51:29 SkyScan query done: ret=0 az=55.02<-3668 ze=115.35<-4310 Statuses=0009 0009 06:51:29 Msec=1500 True Az=55.02 Ze=115.35 Az status=0009 Ze status=0009 06:51:29 Check angles 06:51:29 SkyScan query 06:51:30 SkyScan query done: ret=0 az=40.905<-2727 ze=93.93<-5738 Statuses=0009 0009 06:51:30 Msec=2250 True Az=40.905 Ze=93.93 Az status=0009 Ze status=0009 06:51:30 Check angles 06:51:30 SkyScan query 06:51:31 SkyScan query done: ret=0 az=40.995<-2733 ze=72.945<-7137 Statuses=0008 0009 06:51:31 Msec=3000 True Az=40.995 Ze=72.945 Az status=0008 Ze status=0009 06:51:31 Check angles 06:51:31 SkyScan query 06:51:31 SkyScan query done: ret=0 az=40.995<-2733 ze=52.545<-8497 Statuses=0008 0009 06:51:31 Msec=3750 True Az=40.995 Ze=52.545 Az status=0008 Ze status=0009 06:51:32 Check angles 06:51:32 SkyScan query 06:51:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:51:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:51:32 Message to Master queued w/err=0: serial=56565 error=0 06:51:37 Received message from Master: op=Filter serial=56566 06:51:37 Color wheel filter change from 0 to 0 06:51:37 FLIGetFilterPos err=0 currentPosition=0 06:51:37 FLIGetStepsRemaining err=0 RemainingSteps=0 06:51:37 Filter is already there-color wheel unchanged 06:51:37 Received message from Master: op=Shutter serial=56567 06:51:37 Shutter LASER close 06:51:38 Received message from Camera: op=State serial=56569 06:51:38 GetSingleValue result=40 Value=cccccccc 06:51:38 SkyScan query 06:51:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:51:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:38 Parameters OK 06:51:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:38 Set A/D data flow result=40 06:51:38 Set A/D channel type result=40 06:51:38 Set A/D encoding result=40 06:51:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:38 Set channel filter=0.000000e+000 result=40 06:51:38 Config A/D Result=40 06:51:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:38 Get A/D filter: -9.255963e+061 result=40 06:51:38 Get A/D value=-858993460 result=40 06:51:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:38 Parameters OK 06:51:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:38 Set A/D data flow result=40 06:51:38 Set A/D channel type result=40 06:51:38 Set A/D encoding result=40 06:51:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:38 Set channel filter=0.000000e+000 result=40 06:51:38 Config A/D Result=40 06:51:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:38 Get A/D filter: -9.255963e+061 result=40 06:51:38 Get A/D value=-858993460 result=40 06:51:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:51:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:51:38 Aux= 06:51:38 Message to Camera, serial 56569 queued 06:52:14 Received message from Master: op=PointingHead serial=56581 06:52:14 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:52:14 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:52:14 Point started: ret=0 06:52:14 point_skyscan result=0 06:52:15 Check angles 06:52:15 SkyScan query 06:52:16 SkyScan query done: ret=0 az=63.75<-4250 ze=66.555<-7563 Statuses=0009 0008 06:52:16 Msec=0 True Az=63.75 Ze=66.555 Az status=0009 Ze status=0008 06:52:16 Check angles 06:52:16 SkyScan query 06:52:16 SkyScan query done: ret=0 az=81.105<-5407 ze=66.495<-7567 Statuses=0009 0008 06:52:16 Msec=750 True Az=81.105 Ze=66.495 Az status=0009 Ze status=0008 06:52:17 Check angles 06:52:17 SkyScan query 06:52:17 SkyScan query done: ret=0 az=99.075<-6605 ze=66.495<-7567 Statuses=0009 0008 06:52:17 Msec=1500 True Az=99.075 Ze=66.495 Az status=0009 Ze status=0008 06:52:17 Check angles 06:52:17 SkyScan query 06:52:18 SkyScan query done: ret=0 az=116.64<-7776 ze=66.495<-7567 Statuses=0009 0008 06:52:18 Msec=2250 True Az=116.64 Ze=66.495 Az status=0009 Ze status=0008 06:52:18 Check angles 06:52:18 SkyScan query 06:52:19 SkyScan query done: ret=0 az=134.13<-8942 ze=66.495<-7567 Statuses=0009 0008 06:52:19 Msec=3000 True Az=134.13 Ze=66.495 Az status=0009 Ze status=0008 06:52:19 Check angles 06:52:19 SkyScan query 06:52:19 SkyScan query done: ret=0 az=151.5<-10100 ze=66.495<-7567 Statuses=0009 0008 06:52:19 Msec=3750 True Az=151.5 Ze=66.495 Az status=0009 Ze status=0008 06:52:20 Check angles 06:52:20 SkyScan query 06:52:20 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:52:20 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 06:52:20 Message to Master queued w/err=0: serial=56581 error=0 06:52:25 Received message from Master: op=Filter serial=56582 06:52:25 Color wheel filter change from 0 to 0 06:52:25 FLIGetFilterPos err=0 currentPosition=0 06:52:25 FLIGetStepsRemaining err=0 RemainingSteps=0 06:52:25 Filter is already there-color wheel unchanged 06:52:25 Received message from Master: op=Shutter serial=56583 06:52:25 Shutter LASER close 06:52:25 Received message from Camera: op=State serial=56585 06:52:25 GetSingleValue result=40 Value=cccccccc 06:52:25 SkyScan query 06:52:26 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:52:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:26 Parameters OK 06:52:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:26 Set A/D data flow result=40 06:52:26 Set A/D channel type result=40 06:52:26 Set A/D encoding result=40 06:52:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:26 Set channel filter=0.000000e+000 result=40 06:52:26 Config A/D Result=40 06:52:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:26 Get A/D filter: -9.255963e+061 result=40 06:52:26 Get A/D value=-858993460 result=40 06:52:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:26 Parameters OK 06:52:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:26 Set A/D data flow result=40 06:52:26 Set A/D channel type result=40 06:52:26 Set A/D encoding result=40 06:52:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:26 Set channel filter=0.000000e+000 result=40 06:52:26 Config A/D Result=40 06:52:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:26 Get A/D filter: -9.255963e+061 result=40 06:52:26 Get A/D value=-858993460 result=40 06:52:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:26 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:52:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:52:26 Aux= 06:52:26 Message to Camera, serial 56585 queued 06:53:03 Received message from Master: op=PointingHead serial=56598 06:53:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:53:03 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:53:03 Point started: ret=0 06:53:03 point_skyscan result=0 06:53:04 Check angles 06:53:04 SkyScan query 06:53:04 SkyScan query done: ret=0 az=135.03<-9002 ze=36.72<-9552 Statuses=0009 0009 06:53:04 Msec=0 True Az=135.03 Ze=36.72 Az status=0009 Ze status=0009 06:53:05 Check angles 06:53:05 SkyScan query 06:53:05 SkyScan query done: ret=0 az=117.06<-7804 ze=15.36<-10976 Statuses=0009 0009 06:53:05 Msec=750 True Az=117.06 Ze=15.36 Az status=0009 Ze status=0009 06:53:05 Check angles 06:53:05 SkyScan query 06:53:06 SkyScan query done: ret=0 az=99.765<-6651 ze=-5.61<-12374 Statuses=0009 0009 06:53:06 Msec=1500 True Az=99.765 Ze=-5.61 Az status=0009 Ze status=0009 06:53:06 Check angles 06:53:06 SkyScan query 06:53:07 SkyScan query done: ret=0 az=82.335<-5489 ze=-26.58<-13772 Statuses=0009 0009 06:53:07 Msec=2250 True Az=82.335 Ze=-26.58 Az status=0009 Ze status=0009 06:53:07 Check angles 06:53:07 SkyScan query 06:53:07 SkyScan query done: ret=0 az=64.47<-4298 ze=-38.565<-14571 Statuses=0009 0008 06:53:07 Msec=3000 True Az=64.47 Ze=-38.565 Az status=0009 Ze status=0008 06:53:08 Check angles 06:53:08 SkyScan query 06:53:08 SkyScan query done: ret=0 az=47.025<-3135 ze=-38.535<-14569 Statuses=0009 0008 06:53:08 Msec=3750 True Az=47.025 Ze=-38.535 Az status=0009 Ze status=0008 06:53:08 Check angles 06:53:08 SkyScan query 06:53:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:53:09 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:53:09 Message to Master queued w/err=0: serial=56598 error=0 06:53:14 Received message from Master: op=Filter serial=56599 06:53:14 Color wheel filter change from 0 to 0 06:53:14 FLIGetFilterPos err=0 currentPosition=0 06:53:14 FLIGetStepsRemaining err=0 RemainingSteps=0 06:53:14 Filter is already there-color wheel unchanged 06:53:14 Received message from Master: op=Shutter serial=56600 06:53:14 Shutter LASER close 06:53:14 Received message from Camera: op=State serial=56602 06:53:14 GetSingleValue result=40 Value=cccccccc 06:53:14 SkyScan query 06:53:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:53:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:15 Parameters OK 06:53:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:15 Set A/D data flow result=40 06:53:15 Set A/D channel type result=40 06:53:15 Set A/D encoding result=40 06:53:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:15 Set channel filter=0.000000e+000 result=40 06:53:15 Config A/D Result=40 06:53:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:15 Get A/D filter: -9.255963e+061 result=40 06:53:15 Get A/D value=-858993460 result=40 06:53:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:15 Parameters OK 06:53:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:15 Set A/D data flow result=40 06:53:15 Set A/D channel type result=40 06:53:15 Set A/D encoding result=40 06:53:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:15 Set channel filter=0.000000e+000 result=40 06:53:15 Config A/D Result=40 06:53:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:15 Get A/D filter: -9.255963e+061 result=40 06:53:15 Get A/D value=-858993460 result=40 06:53:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:53:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:53:15 Aux= 06:53:15 Message to Camera, serial 56602 queued 06:53:52 Received message from Master: op=PointingHead serial=56615 06:53:52 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:53:52 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:53:52 Point started: ret=0 06:53:52 point_skyscan result=0 06:53:53 Check angles 06:53:53 SkyScan query 06:53:53 SkyScan query done: ret=0 az=64.32<-4288 ze=-68.625<-16575 Statuses=0009 0009 06:53:53 Msec=0 True Az=64.32 Ze=-68.625 Az status=0009 Ze status=0009 06:53:54 Check angles 06:53:54 SkyScan query 06:53:54 SkyScan query done: ret=0 az=81.66<-5444 ze=-89.595<-17973 Statuses=0009 0009 06:53:54 Msec=750 True Az=81.66 Ze=-89.595 Az status=0009 Ze status=0009 06:53:54 Check angles 06:53:54 SkyScan query 06:53:55 SkyScan query done: ret=0 az=99.255<-6617 ze=-110.55<-19370 Statuses=0009 0009 06:53:55 Msec=1500 True Az=99.255 Ze=-110.55 Az status=0009 Ze status=0009 06:53:55 Check angles 06:53:55 SkyScan query 06:53:56 SkyScan query done: ret=0 az=117.15<-7810 ze=-131.895<-20793 Statuses=0009 0009 06:53:56 Msec=2250 True Az=117.15 Ze=-131.895 Az status=0009 Ze status=0009 06:53:56 Check angles 06:53:56 SkyScan query 06:53:56 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.555<-21437 Statuses=0009 0008 06:53:56 Msec=3000 True Az=131.115 Ze=-141.555 Az status=0009 Ze status=0008 06:53:57 Check angles 06:53:57 SkyScan query 06:53:57 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 06:53:57 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 06:53:57 Message to Master queued w/err=0: serial=56615 error=0 06:54:02 Received message from Master: op=Filter serial=56616 06:54:02 Color wheel filter change from 0 to 0 06:54:02 FLIGetFilterPos err=0 currentPosition=0 06:54:02 FLIGetStepsRemaining err=0 RemainingSteps=0 06:54:02 Filter is already there-color wheel unchanged 06:54:02 Received message from Master: op=Shutter serial=56617 06:54:02 Shutter LASER close 06:54:02 Received message from Camera: op=State serial=56619 06:54:02 GetSingleValue result=40 Value=cccccccc 06:54:02 SkyScan query 06:54:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:54:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:03 Parameters OK 06:54:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:03 Set A/D data flow result=40 06:54:03 Set A/D channel type result=40 06:54:03 Set A/D encoding result=40 06:54:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:03 Set channel filter=0.000000e+000 result=40 06:54:03 Config A/D Result=40 06:54:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:03 Get A/D filter: -9.255963e+061 result=40 06:54:03 Get A/D value=-858993460 result=40 06:54:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:03 Parameters OK 06:54:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:03 Set A/D data flow result=40 06:54:03 Set A/D channel type result=40 06:54:03 Set A/D encoding result=40 06:54:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:03 Set channel filter=0.000000e+000 result=40 06:54:03 Config A/D Result=40 06:54:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:03 Get A/D filter: -9.255963e+061 result=40 06:54:03 Get A/D value=-858993460 result=40 06:54:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:03 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:54:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:54:03 Aux= 06:54:03 Message to Camera, serial 56619 queued 06:54:40 Received message from Master: op=PointingHead serial=56632 06:54:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:54:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:54:40 Point started: ret=0 06:54:40 point_skyscan result=0 06:54:41 Check angles 06:54:41 SkyScan query 06:54:41 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.18<-23412 Statuses=0009 0009 06:54:41 Msec=0 True Az=113.01 Ze=-171.18 Az status=0009 Ze status=0009 06:54:42 Check angles 06:54:42 SkyScan query 06:54:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:54:42 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:54:42 Message to Master queued w/err=0: serial=56632 error=0 06:54:47 Received message from Master: op=Filter serial=56633 06:54:47 Color wheel filter change from 0 to 0 06:54:47 FLIGetFilterPos err=0 currentPosition=0 06:54:47 FLIGetStepsRemaining err=0 RemainingSteps=0 06:54:47 Filter is already there-color wheel unchanged 06:54:47 Received message from Master: op=Shutter serial=56634 06:54:47 Shutter LASER open 06:54:48 Received message from Camera: op=State serial=56636 06:54:48 GetSingleValue result=40 Value=cccccccc 06:54:48 SkyScan query 06:54:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:54:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:48 Parameters OK 06:54:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:48 Set A/D data flow result=40 06:54:48 Set A/D channel type result=40 06:54:48 Set A/D encoding result=40 06:54:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:48 Set channel filter=0.000000e+000 result=40 06:54:48 Config A/D Result=40 06:54:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:48 Get A/D filter: -9.255963e+061 result=40 06:54:48 Get A/D value=-858993460 result=40 06:54:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:48 Parameters OK 06:54:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:48 Set A/D data flow result=40 06:54:48 Set A/D channel type result=40 06:54:48 Set A/D encoding result=40 06:54:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:48 Set channel filter=0.000000e+000 result=40 06:54:48 Config A/D Result=40 06:54:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:48 Get A/D filter: -9.255963e+061 result=40 06:54:48 Get A/D value=-858993460 result=40 06:54:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:54:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:54:48 Aux= 06:54:48 Message to Camera, serial 56636 queued 06:54:57 Received message from Master: op=Shutter serial=56646 06:54:57 Shutter LASER close 06:54:57 Received message from Master: op=PointingHead serial=56650 06:54:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:54:57 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:54:57 Point started: ret=0 06:54:57 point_skyscan result=0 06:54:58 Check angles 06:54:58 SkyScan query 06:54:59 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.055<-21537 Statuses=0009 0009 06:54:59 Msec=0 True Az=136.17 Ze=-143.055 Az status=0009 Ze status=0009 06:54:59 Check angles 06:54:59 SkyScan query 06:55:00 SkyScan query done: ret=0 az=154.035<-10269 ze=-121.68<-20112 Statuses=0009 0009 06:55:00 Msec=750 True Az=154.035 Ze=-121.68 Az status=0009 Ze status=0009 06:55:00 Check angles 06:55:00 SkyScan query 06:55:00 SkyScan query done: ret=0 az=171.465<-11431 ze=-100.68<-18712 Statuses=0009 0009 06:55:00 Msec=1500 True Az=171.465 Ze=-100.68 Az status=0009 Ze status=0009 06:55:00 Check angles 06:55:00 SkyScan query 06:55:01 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.785<-17319 Statuses=0008 0009 06:55:01 Msec=2250 True Az=176.025 Ze=-79.785 Az status=0008 Ze status=0009 06:55:01 Check angles 06:55:01 SkyScan query 06:55:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.335<-15889 Statuses=0008 0009 06:55:02 Msec=3000 True Az=175.995 Ze=-58.335 Az status=0008 Ze status=0009 06:55:02 Check angles 06:55:02 SkyScan query 06:55:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 06:55:03 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 06:55:03 Message to Master queued w/err=0: serial=56650 error=0 06:55:08 Received message from Master: op=Filter serial=56651 06:55:08 Color wheel filter change from 0 to 0 06:55:08 FLIGetFilterPos err=0 currentPosition=0 06:55:08 FLIGetStepsRemaining err=0 RemainingSteps=0 06:55:08 Filter is already there-color wheel unchanged 06:55:08 Received message from Master: op=Shutter serial=56652 06:55:08 Shutter LASER close 06:55:08 Received message from Camera: op=State serial=56654 06:55:08 GetSingleValue result=40 Value=cccccccc 06:55:08 SkyScan query 06:55:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:55:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:08 Parameters OK 06:55:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:08 Set A/D data flow result=40 06:55:08 Set A/D channel type result=40 06:55:08 Set A/D encoding result=40 06:55:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:08 Set channel filter=0.000000e+000 result=40 06:55:08 Config A/D Result=40 06:55:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:08 Get A/D filter: -9.255963e+061 result=40 06:55:08 Get A/D value=-858993460 result=40 06:55:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:08 Parameters OK 06:55:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:08 Set A/D data flow result=40 06:55:08 Set A/D channel type result=40 06:55:08 Set A/D encoding result=40 06:55:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:08 Set channel filter=0.000000e+000 result=40 06:55:08 Config A/D Result=40 06:55:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:08 Get A/D filter: -9.255963e+061 result=40 06:55:08 Get A/D value=-858993460 result=40 06:55:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:55:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:55:08 Aux= 06:55:08 Message to Camera, serial 56654 queued 06:55:45 Received message from Master: op=PointingHead serial=56667 06:55:45 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:55:45 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:55:46 Point started: ret=0 06:55:46 point_skyscan result=0 06:55:46 Check angles 06:55:46 SkyScan query 06:55:47 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.795<-13453 Statuses=0009 0009 06:55:47 Msec=0 True Az=152.94 Ze=-21.795 Az status=0009 Ze status=0009 [UTC 2018-12-11 06:55:47] 06:55:47 Check angles 06:55:47 SkyScan query 06:55:48 SkyScan query done: ret=0 az=134.04<-8936 ze=0.945<-11937 Statuses=0009 0009 06:55:48 Msec=750 True Az=134.04 Ze=0.945 Az status=0009 Ze status=0009 06:55:48 Check angles 06:55:48 SkyScan query 06:55:49 SkyScan query done: ret=0 az=117.63<-7842 ze=20.58<-10628 Statuses=0009 0009 06:55:49 Msec=1500 True Az=117.63 Ze=20.58 Az status=0009 Ze status=0009 06:55:49 Check angles 06:55:49 SkyScan query 06:55:49 SkyScan query done: ret=0 az=100.2<-6680 ze=41.55<-9230 Statuses=0009 0009 06:55:49 Msec=2250 True Az=100.2 Ze=41.55 Az status=0009 Ze status=0009 06:55:49 Check angles 06:55:49 SkyScan query 06:55:50 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 06:55:50 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 06:55:50 Check angles 06:55:50 SkyScan query 06:55:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:55:51 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:55:51 Message to Master queued w/err=0: serial=56667 error=0 [UTC 2018-12-11 06:55:54] 06:55:56 Received message from Master: op=Filter serial=56668 06:55:56 Color wheel filter change from 0 to 0 06:55:56 FLIGetFilterPos err=0 currentPosition=0 06:55:56 FLIGetStepsRemaining err=0 RemainingSteps=0 06:55:56 Filter is already there-color wheel unchanged 06:55:56 Received message from Master: op=Shutter serial=56669 06:55:56 Shutter LASER close 06:55:56 Received message from Camera: op=State serial=56671 06:55:56 GetSingleValue result=40 Value=cccccccc 06:55:56 SkyScan query 06:55:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:55:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:57 Parameters OK 06:55:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:57 Set A/D data flow result=40 06:55:57 Set A/D channel type result=40 06:55:57 Set A/D encoding result=40 06:55:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:57 Set channel filter=0.000000e+000 result=40 06:55:57 Config A/D Result=40 06:55:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:57 Get A/D filter: -9.255963e+061 result=40 06:55:57 Get A/D value=-858993460 result=40 06:55:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:57 Parameters OK 06:55:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:57 Set A/D data flow result=40 06:55:57 Set A/D channel type result=40 06:55:57 Set A/D encoding result=40 06:55:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:57 Set channel filter=0.000000e+000 result=40 06:55:57 Config A/D Result=40 06:55:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:57 Get A/D filter: -9.255963e+061 result=40 06:55:57 Get A/D value=-858993460 result=40 06:55:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:55:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:55:57 Aux= 06:55:57 Message to Camera, serial 56671 queued 06:56:34 Received message from Master: op=PointingHead serial=56684 06:56:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:56:34 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:56:34 Point started: ret=0 06:56:34 point_skyscan result=0 06:56:35 Check angles 06:56:35 SkyScan query 06:56:35 SkyScan query done: ret=0 az=108.765<-7251 ze=38.49<-9434 Statuses=0009 0008 06:56:35 Msec=0 True Az=108.765 Ze=38.49 Az status=0009 Ze status=0008 06:56:35 Check angles 06:56:35 SkyScan query 06:56:36 SkyScan query done: ret=0 az=126.36<-8424 ze=38.505<-9433 Statuses=0009 0008 06:56:36 Msec=750 True Az=126.36 Ze=38.505 Az status=0009 Ze status=0008 06:56:36 Check angles 06:56:36 SkyScan query 06:56:37 SkyScan query done: ret=0 az=144.075<-9605 ze=38.505<-9433 Statuses=0009 0008 06:56:37 Msec=1500 True Az=144.075 Ze=38.505 Az status=0009 Ze status=0008 06:56:37 Check angles 06:56:37 SkyScan query 06:56:37 SkyScan query done: ret=0 az=161.88<-10792 ze=38.505<-9433 Statuses=0009 0008 06:56:37 Msec=2250 True Az=161.88 Ze=38.505 Az status=0009 Ze status=0008 06:56:38 Check angles 06:56:38 SkyScan query 06:56:38 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:56:38 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:56:38 Check angles 06:56:38 SkyScan query 06:56:39 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:56:39 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:56:39 Message to Master queued w/err=0: serial=56684 error=0 06:56:44 Received message from Master: op=Filter serial=56685 06:56:44 Color wheel filter change from 0 to 0 06:56:44 FLIGetFilterPos err=0 currentPosition=0 06:56:44 FLIGetStepsRemaining err=0 RemainingSteps=0 06:56:44 Filter is already there-color wheel unchanged 06:56:44 Received message from Master: op=Shutter serial=56686 06:56:44 Shutter LASER close 06:56:44 Received message from Camera: op=State serial=56688 06:56:44 GetSingleValue result=40 Value=cccccccc 06:56:44 SkyScan query 06:56:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:56:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:45 Parameters OK 06:56:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:45 Set A/D data flow result=40 06:56:45 Set A/D channel type result=40 06:56:45 Set A/D encoding result=40 06:56:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:45 Set channel filter=0.000000e+000 result=40 06:56:45 Config A/D Result=40 06:56:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:45 Get A/D filter: -9.255963e+061 result=40 06:56:45 Get A/D value=-858993460 result=40 06:56:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:45 Parameters OK 06:56:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:45 Set A/D data flow result=40 06:56:45 Set A/D channel type result=40 06:56:45 Set A/D encoding result=40 06:56:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:45 Set channel filter=0.000000e+000 result=40 06:56:45 Config A/D Result=40 06:56:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:45 Get A/D filter: -9.255963e+061 result=40 06:56:45 Get A/D value=-858993460 result=40 06:56:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:56:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:56:45 Aux= 06:56:45 Message to Camera, serial 56688 queued 06:57:22 Received message from Master: op=PointingHead serial=56701 06:57:22 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:57:22 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:57:22 Point started: ret=0 06:57:22 point_skyscan result=0 06:57:23 Check angles 06:57:23 SkyScan query 06:57:23 SkyScan query done: ret=0 az=153.225<-10215 ze=8.97<-11402 Statuses=0009 0009 06:57:23 Msec=0 True Az=153.225 Ze=8.97 Az status=0009 Ze status=0009 06:57:23 Check angles 06:57:23 SkyScan query 06:57:24 SkyScan query done: ret=0 az=135.87<-9058 ze=-11.97<-12798 Statuses=0009 0009 06:57:24 Msec=750 True Az=135.87 Ze=-11.97 Az status=0009 Ze status=0009 06:57:24 Check angles 06:57:24 SkyScan query 06:57:25 SkyScan query done: ret=0 az=117.93<-7862 ze=-33.33<-14222 Statuses=0009 0009 06:57:25 Msec=1500 True Az=117.93 Ze=-33.33 Az status=0009 Ze status=0009 06:57:25 Check angles 06:57:25 SkyScan query 06:57:26 SkyScan query done: ret=0 az=100.44<-6696 ze=-51.54<-15436 Statuses=0009 0009 06:57:26 Msec=2250 True Az=100.44 Ze=-51.54 Az status=0009 Ze status=0009 06:57:26 Check angles 06:57:26 SkyScan query 06:57:26 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 06:57:26 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 06:57:26 Check angles 06:57:26 SkyScan query 06:57:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:57:27 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:57:27 Message to Master queued w/err=0: serial=56701 error=0 06:57:32 Received message from Master: op=Filter serial=56702 06:57:32 Color wheel filter change from 0 to 0 06:57:32 FLIGetFilterPos err=0 currentPosition=0 06:57:32 FLIGetStepsRemaining err=0 RemainingSteps=0 06:57:32 Filter is already there-color wheel unchanged 06:57:32 Received message from Master: op=Shutter serial=56703 06:57:32 Shutter LASER close 06:57:32 Received message from Camera: op=State serial=56705 06:57:32 GetSingleValue result=40 Value=cccccccc 06:57:32 SkyScan query 06:57:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:57:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:33 Parameters OK 06:57:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:33 Set A/D data flow result=40 06:57:33 Set A/D channel type result=40 06:57:33 Set A/D encoding result=40 06:57:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:33 Set channel filter=0.000000e+000 result=40 06:57:33 Config A/D Result=40 06:57:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:33 Get A/D filter: -9.255963e+061 result=40 06:57:33 Get A/D value=-858993460 result=40 06:57:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:33 Parameters OK 06:57:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:33 Set A/D data flow result=40 06:57:33 Set A/D channel type result=40 06:57:33 Set A/D encoding result=40 06:57:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:33 Set channel filter=0.000000e+000 result=40 06:57:33 Config A/D Result=40 06:57:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:33 Get A/D filter: -9.255963e+061 result=40 06:57:33 Get A/D value=-858993460 result=40 06:57:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:57:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:57:33 Aux= 06:57:33 Message to Camera, serial 56705 queued 06:58:10 Received message from Master: op=PointingHead serial=56718 06:58:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:58:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:58:10 Point started: ret=0 06:58:10 point_skyscan result=0 06:58:11 Check angles 06:58:11 SkyScan query 06:58:11 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.3<-17420 Statuses=0009 0009 06:58:11 Msec=0 True Az=108.99 Ze=-81.3 Az status=0009 Ze status=0009 06:58:12 Check angles 06:58:12 SkyScan query 06:58:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.255<-18817 Statuses=0008 0009 06:58:12 Msec=750 True Az=112.995 Ze=-102.255 Az status=0008 Ze status=0009 06:58:12 Check angles 06:58:12 SkyScan query 06:58:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.24<-20216 Statuses=0008 0009 06:58:13 Msec=1500 True Az=112.995 Ze=-123.24 Az status=0008 Ze status=0009 06:58:13 Check angles 06:58:13 SkyScan query 06:58:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.195<-21613 Statuses=0008 0009 06:58:14 Msec=2250 True Az=112.995 Ze=-144.195 Az status=0008 Ze status=0009 06:58:14 Check angles 06:58:14 SkyScan query 06:58:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.15<-23010 Statuses=0008 0009 06:58:14 Msec=3000 True Az=112.995 Ze=-165.15 Az status=0008 Ze status=0009 06:58:15 Check angles 06:58:15 SkyScan query 06:58:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 06:58:15 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 06:58:15 Message to Master queued w/err=0: serial=56718 error=0 06:58:20 Received message from Master: op=Filter serial=56719 06:58:20 Color wheel filter change from 0 to 0 06:58:20 FLIGetFilterPos err=0 currentPosition=0 06:58:20 FLIGetStepsRemaining err=0 RemainingSteps=0 06:58:20 Filter is already there-color wheel unchanged 06:58:20 Received message from Master: op=Shutter serial=56720 06:58:20 Shutter LASER open 06:58:20 Received message from Camera: op=State serial=56722 06:58:20 GetSingleValue result=40 Value=cccccccc 06:58:20 SkyScan query 06:58:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:58:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:21 Parameters OK 06:58:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:21 Set A/D data flow result=40 06:58:21 Set A/D channel type result=40 06:58:21 Set A/D encoding result=40 06:58:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:21 Set channel filter=0.000000e+000 result=40 06:58:21 Config A/D Result=40 06:58:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:21 Get A/D filter: -9.255963e+061 result=40 06:58:21 Get A/D value=-858993460 result=40 06:58:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:21 Parameters OK 06:58:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:21 Set A/D data flow result=40 06:58:21 Set A/D channel type result=40 06:58:21 Set A/D encoding result=40 06:58:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:21 Set channel filter=0.000000e+000 result=40 06:58:21 Config A/D Result=40 06:58:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:21 Get A/D filter: -9.255963e+061 result=40 06:58:21 Get A/D value=-858993460 result=40 06:58:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:58:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:58:21 Aux= 06:58:21 Message to Camera, serial 56722 queued 06:58:29 Received message from Master: op=Shutter serial=56732 06:58:29 Shutter LASER close 06:58:30 Received message from Master: op=PointingHead serial=56736 06:58:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:58:30 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:58:30 Point started: ret=0 06:58:30 point_skyscan result=0 06:58:31 Check angles 06:58:31 SkyScan query 06:58:32 SkyScan query done: ret=0 az=89.91<-5994 ze=157.38<-1508 Statuses=0009 0009 06:58:32 Msec=0 True Az=89.91 Ze=157.38 Az status=0009 Ze status=0009 06:58:32 Check angles 06:58:32 SkyScan query 06:58:32 SkyScan query done: ret=0 az=72.6<-4840 ze=136.44<-2904 Statuses=0009 0009 06:58:32 Msec=750 True Az=72.6 Ze=136.44 Az status=0009 Ze status=0009 06:58:32 Check angles 06:58:32 SkyScan query 06:58:33 SkyScan query done: ret=0 az=55.125<-3675 ze=115.5<-4300 Statuses=0009 0009 06:58:33 Msec=1500 True Az=55.125 Ze=115.5 Az status=0009 Ze status=0009 06:58:33 Check angles 06:58:33 SkyScan query 06:58:34 SkyScan query done: ret=0 az=40.875<-2725 ze=94.5<-5700 Statuses=0009 0009 06:58:34 Msec=2250 True Az=40.875 Ze=94.5 Az status=0009 Ze status=0009 06:58:34 Check angles 06:58:34 SkyScan query 06:58:35 SkyScan query done: ret=0 az=40.995<-2733 ze=73.59<-7094 Statuses=0008 0009 06:58:35 Msec=3000 True Az=40.995 Ze=73.59 Az status=0008 Ze status=0009 06:58:35 Check angles 06:58:35 SkyScan query 06:58:35 SkyScan query done: ret=0 az=40.995<-2733 ze=52.935<-8471 Statuses=0008 0009 06:58:35 Msec=3750 True Az=40.995 Ze=52.935 Az status=0008 Ze status=0009 06:58:35 Check angles 06:58:35 SkyScan query 06:58:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:58:36 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:58:36 Message to Master queued w/err=0: serial=56736 error=0 06:58:41 Received message from Master: op=Filter serial=56737 06:58:41 Color wheel filter change from 0 to 0 06:58:41 FLIGetFilterPos err=0 currentPosition=0 06:58:41 FLIGetStepsRemaining err=0 RemainingSteps=0 06:58:41 Filter is already there-color wheel unchanged 06:58:41 Received message from Master: op=Shutter serial=56738 06:58:41 Shutter LASER close 06:58:41 Received message from Camera: op=State serial=56740 06:58:41 GetSingleValue result=40 Value=cccccccc 06:58:41 SkyScan query 06:58:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:58:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:42 Parameters OK 06:58:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:42 Set A/D data flow result=40 06:58:42 Set A/D channel type result=40 06:58:42 Set A/D encoding result=40 06:58:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:42 Set channel filter=0.000000e+000 result=40 06:58:42 Config A/D Result=40 06:58:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:42 Get A/D filter: -9.255963e+061 result=40 06:58:42 Get A/D value=-858993460 result=40 06:58:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:42 Parameters OK 06:58:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:42 Set A/D data flow result=40 06:58:42 Set A/D channel type result=40 06:58:42 Set A/D encoding result=40 06:58:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:42 Set channel filter=0.000000e+000 result=40 06:58:42 Config A/D Result=40 06:58:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:42 Get A/D filter: -9.255963e+061 result=40 06:58:42 Get A/D value=-858993460 result=40 06:58:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:58:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:58:42 Aux= 06:58:42 Message to Camera, serial 56740 queued 06:59:19 Received message from Master: op=PointingHead serial=56753 06:59:19 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:59:19 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:59:19 Point started: ret=0 06:59:19 point_skyscan result=0 06:59:20 Check angles 06:59:20 SkyScan query 06:59:20 SkyScan query done: ret=0 az=64.23<-4282 ze=66.555<-7563 Statuses=0009 0008 06:59:20 Msec=0 True Az=64.23 Ze=66.555 Az status=0009 Ze status=0008 06:59:21 Check angles 06:59:21 SkyScan query 06:59:21 SkyScan query done: ret=0 az=81.99<-5466 ze=66.51<-7566 Statuses=0009 0008 06:59:21 Msec=750 True Az=81.99 Ze=66.51 Az status=0009 Ze status=0008 06:59:21 Check angles 06:59:21 SkyScan query 06:59:22 SkyScan query done: ret=0 az=99.615<-6641 ze=66.495<-7567 Statuses=0009 0008 06:59:22 Msec=1500 True Az=99.615 Ze=66.495 Az status=0009 Ze status=0008 06:59:22 Check angles 06:59:22 SkyScan query 06:59:23 SkyScan query done: ret=0 az=117.075<-7805 ze=66.495<-7567 Statuses=0009 0008 06:59:23 Msec=2250 True Az=117.075 Ze=66.495 Az status=0009 Ze status=0008 06:59:23 Check angles 06:59:23 SkyScan query 06:59:23 SkyScan query done: ret=0 az=134.745<-8983 ze=66.495<-7567 Statuses=0009 0008 06:59:23 Msec=3000 True Az=134.745 Ze=66.495 Az status=0009 Ze status=0008 06:59:24 Check angles 06:59:24 SkyScan query 06:59:24 SkyScan query done: ret=0 az=152.625<-10175 ze=66.495<-7567 Statuses=0009 0008 06:59:24 Msec=3750 True Az=152.625 Ze=66.495 Az status=0009 Ze status=0008 06:59:24 Check angles 06:59:24 SkyScan query 06:59:25 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 06:59:25 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 06:59:25 Message to Master queued w/err=0: serial=56753 error=0 06:59:30 Received message from Master: op=Filter serial=56754 06:59:30 Color wheel filter change from 0 to 0 06:59:30 FLIGetFilterPos err=0 currentPosition=0 06:59:30 FLIGetStepsRemaining err=0 RemainingSteps=0 06:59:30 Filter is already there-color wheel unchanged 06:59:30 Received message from Master: op=Shutter serial=56755 06:59:30 Shutter LASER close 06:59:30 Received message from Camera: op=State serial=56757 06:59:30 GetSingleValue result=40 Value=cccccccc 06:59:30 SkyScan query 06:59:31 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:59:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:31 Parameters OK 06:59:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:31 Set A/D data flow result=40 06:59:31 Set A/D channel type result=40 06:59:31 Set A/D encoding result=40 06:59:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:31 Set channel filter=0.000000e+000 result=40 06:59:31 Config A/D Result=40 06:59:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:31 Get A/D filter: -9.255963e+061 result=40 06:59:31 Get A/D value=-858993460 result=40 06:59:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:31 Parameters OK 06:59:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:31 Set A/D data flow result=40 06:59:31 Set A/D channel type result=40 06:59:31 Set A/D encoding result=40 06:59:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:31 Set channel filter=0.000000e+000 result=40 06:59:31 Config A/D Result=40 06:59:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:31 Get A/D filter: -9.255963e+061 result=40 06:59:31 Get A/D value=-858993460 result=40 06:59:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:31 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:59:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:59:31 Aux= 06:59:31 Message to Camera, serial 56757 queued 07:00:08 Received message from Master: op=PointingHead serial=56770 07:00:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:00:08 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:00:08 Point started: ret=0 07:00:08 point_skyscan result=0 07:00:09 Check angles 07:00:09 SkyScan query 07:00:09 SkyScan query done: ret=0 az=135.225<-9015 ze=36.855<-9543 Statuses=0009 0009 07:00:09 Msec=0 True Az=135.225 Ze=36.855 Az status=0009 Ze status=0009 07:00:09 Check angles 07:00:09 SkyScan query 07:00:10 SkyScan query done: ret=0 az=117.735<-7849 ze=15.885<-10941 Statuses=0009 0009 07:00:10 Msec=750 True Az=117.735 Ze=15.885 Az status=0009 Ze status=0009 07:00:10 Check angles 07:00:10 SkyScan query 07:00:11 SkyScan query done: ret=0 az=100.35<-6690 ze=-5.055<-12337 Statuses=0009 0009 07:00:11 Msec=1500 True Az=100.35 Ze=-5.055 Az status=0009 Ze status=0009 07:00:11 Check angles 07:00:11 SkyScan query 07:00:12 SkyScan query done: ret=0 az=82.845<-5523 ze=-26.04<-13736 Statuses=0009 0009 07:00:12 Msec=2250 True Az=82.845 Ze=-26.04 Az status=0009 Ze status=0009 07:00:12 Check angles 07:00:12 SkyScan query 07:00:12 SkyScan query done: ret=0 az=65.325<-4355 ze=-38.58<-14572 Statuses=0009 0008 07:00:12 Msec=3000 True Az=65.325 Ze=-38.58 Az status=0009 Ze status=0008 07:00:12 Check angles 07:00:12 SkyScan query 07:00:13 SkyScan query done: ret=0 az=47.82<-3188 ze=-38.535<-14569 Statuses=0009 0008 07:00:13 Msec=3750 True Az=47.82 Ze=-38.535 Az status=0009 Ze status=0008 07:00:13 Check angles 07:00:13 SkyScan query 07:00:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:00:14 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:00:14 Message to Master queued w/err=0: serial=56770 error=0 07:00:19 Received message from Master: op=Filter serial=56771 07:00:19 Color wheel filter change from 0 to 0 07:00:19 FLIGetFilterPos err=0 currentPosition=0 07:00:19 FLIGetStepsRemaining err=0 RemainingSteps=0 07:00:19 Filter is already there-color wheel unchanged 07:00:19 Received message from Master: op=Shutter serial=56772 07:00:19 Shutter LASER close 07:00:19 Received message from Camera: op=State serial=56774 07:00:19 GetSingleValue result=40 Value=cccccccc 07:00:19 SkyScan query 07:00:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:00:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:20 Parameters OK 07:00:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:20 Set A/D data flow result=40 07:00:20 Set A/D channel type result=40 07:00:20 Set A/D encoding result=40 07:00:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:20 Set channel filter=0.000000e+000 result=40 07:00:20 Config A/D Result=40 07:00:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:20 Get A/D filter: -9.255963e+061 result=40 07:00:20 Get A/D value=-858993460 result=40 07:00:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:20 Parameters OK 07:00:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:20 Set A/D data flow result=40 07:00:20 Set A/D channel type result=40 07:00:20 Set A/D encoding result=40 07:00:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:20 Set channel filter=0.000000e+000 result=40 07:00:20 Config A/D Result=40 07:00:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:20 Get A/D filter: -9.255963e+061 result=40 07:00:20 Get A/D value=-858993460 result=40 07:00:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:00:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:00:20 Aux= 07:00:20 Message to Camera, serial 56774 queued 07:00:56 Received message from Master: op=PointingHead serial=56787 07:00:56 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:00:56 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:00:57 Point started: ret=0 07:00:57 point_skyscan result=0 07:00:58 Check angles 07:00:58 SkyScan query 07:00:58 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.505<-16567 Statuses=0009 0009 07:00:58 Msec=0 True Az=64.245 Ze=-68.505 Az status=0009 Ze status=0009 07:00:58 Check angles 07:00:58 SkyScan query 07:00:59 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.49<-17966 Statuses=0009 0009 07:00:59 Msec=750 True Az=81.54 Ze=-89.49 Az status=0009 Ze status=0009 07:00:59 Check angles 07:00:59 SkyScan query 07:01:00 SkyScan query done: ret=0 az=99.15<-6610 ze=-110.52<-19368 Statuses=0009 0009 07:01:00 Msec=1500 True Az=99.15 Ze=-110.52 Az status=0009 Ze status=0009 07:01:00 Check angles 07:01:00 SkyScan query 07:01:00 SkyScan query done: ret=0 az=117.075<-7805 ze=-131.835<-20789 Statuses=0009 0009 07:01:00 Msec=2250 True Az=117.075 Ze=-131.835 Az status=0009 Ze status=0009 07:01:01 Check angles 07:01:01 SkyScan query 07:01:01 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.555<-21437 Statuses=0009 0008 07:01:01 Msec=3000 True Az=131.07 Ze=-141.555 Az status=0009 Ze status=0008 07:01:01 Check angles 07:01:01 SkyScan query 07:01:02 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 07:01:02 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 07:01:02 Message to Master queued w/err=0: serial=56787 error=0 07:01:07 Received message from Master: op=Filter serial=56788 07:01:07 Color wheel filter change from 0 to 0 07:01:07 FLIGetFilterPos err=0 currentPosition=0 07:01:07 FLIGetStepsRemaining err=0 RemainingSteps=0 07:01:07 Filter is already there-color wheel unchanged 07:01:07 Received message from Master: op=Shutter serial=56789 07:01:07 Shutter LASER close 07:01:07 Received message from Camera: op=State serial=56791 07:01:07 GetSingleValue result=40 Value=cccccccc 07:01:07 SkyScan query 07:01:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:01:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:08 Parameters OK 07:01:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:08 Set A/D data flow result=40 07:01:08 Set A/D channel type result=40 07:01:08 Set A/D encoding result=40 07:01:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:08 Set channel filter=0.000000e+000 result=40 07:01:08 Config A/D Result=40 07:01:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:08 Get A/D filter: -9.255963e+061 result=40 07:01:08 Get A/D value=-858993460 result=40 07:01:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:08 Parameters OK 07:01:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:08 Set A/D data flow result=40 07:01:08 Set A/D channel type result=40 07:01:08 Set A/D encoding result=40 07:01:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:08 Set channel filter=0.000000e+000 result=40 07:01:08 Config A/D Result=40 07:01:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:08 Get A/D filter: -9.255963e+061 result=40 07:01:08 Get A/D value=-858993460 result=40 07:01:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:08 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:01:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:01:08 Aux= 07:01:08 Message to Camera, serial 56791 queued 07:01:45 Received message from Master: op=PointingHead serial=56804 07:01:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:01:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:01:45 Point started: ret=0 07:01:45 point_skyscan result=0 07:01:46 Check angles 07:01:46 SkyScan query 07:01:46 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.88<-23392 Statuses=0009 0009 07:01:46 Msec=0 True Az=113.01 Ze=-170.88 Az status=0009 Ze status=0009 07:01:46 Check angles 07:01:46 SkyScan query 07:01:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:01:47 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:01:47 Message to Master queued w/err=0: serial=56804 error=0 07:01:52 Received message from Master: op=Filter serial=56805 07:01:52 Color wheel filter change from 0 to 0 07:01:52 FLIGetFilterPos err=0 currentPosition=0 07:01:52 FLIGetStepsRemaining err=0 RemainingSteps=0 07:01:52 Filter is already there-color wheel unchanged 07:01:52 Received message from Master: op=Shutter serial=56806 07:01:52 Shutter LASER open 07:01:52 Received message from Camera: op=State serial=56808 07:01:52 GetSingleValue result=40 Value=cccccccc 07:01:52 SkyScan query 07:01:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:01:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:53 Parameters OK 07:01:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:53 Set A/D data flow result=40 07:01:53 Set A/D channel type result=40 07:01:53 Set A/D encoding result=40 07:01:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:53 Set channel filter=0.000000e+000 result=40 07:01:53 Config A/D Result=40 07:01:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:53 Get A/D filter: -9.255963e+061 result=40 07:01:53 Get A/D value=-858993460 result=40 07:01:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:53 Parameters OK 07:01:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:53 Set A/D data flow result=40 07:01:53 Set A/D channel type result=40 07:01:53 Set A/D encoding result=40 07:01:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:53 Set channel filter=0.000000e+000 result=40 07:01:53 Config A/D Result=40 07:01:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:53 Get A/D filter: -9.255963e+061 result=40 07:01:53 Get A/D value=-858993460 result=40 07:01:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:01:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:01:53 Aux= 07:01:53 Message to Camera, serial 56808 queued 07:02:01 Received message from Master: op=Shutter serial=56818 07:02:01 Shutter LASER close 07:02:02 Received message from Master: op=PointingHead serial=56822 07:02:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:02:02 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:02:02 Point started: ret=0 07:02:02 point_skyscan result=0 07:02:03 Check angles 07:02:03 SkyScan query 07:02:04 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.665<-21511 Statuses=0009 0009 07:02:04 Msec=0 True Az=136.365 Ze=-142.665 Az status=0009 Ze status=0009 07:02:04 Check angles 07:02:04 SkyScan query 07:02:04 SkyScan query done: ret=0 az=153.825<-10255 ze=-121.74<-20116 Statuses=0009 0009 07:02:04 Msec=750 True Az=153.825 Ze=-121.74 Az status=0009 Ze status=0009 07:02:05 Check angles 07:02:05 SkyScan query 07:02:05 SkyScan query done: ret=0 az=171.705<-11447 ze=-100.305<-18687 Statuses=0009 0009 07:02:05 Msec=1500 True Az=171.705 Ze=-100.305 Az status=0009 Ze status=0009 07:02:05 Check angles 07:02:05 SkyScan query 07:02:06 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.395<-17293 Statuses=0008 0009 07:02:06 Msec=2250 True Az=176.025 Ze=-79.395 Az status=0008 Ze status=0009 07:02:06 Check angles 07:02:06 SkyScan query 07:02:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.41<-15894 Statuses=0008 0009 07:02:07 Msec=3000 True Az=176.01 Ze=-58.41 Az status=0008 Ze status=0009 07:02:07 Check angles 07:02:07 SkyScan query 07:02:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 07:02:07 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 07:02:07 Message to Master queued w/err=0: serial=56822 error=0 07:02:12 Received message from Master: op=Filter serial=56823 07:02:12 Color wheel filter change from 0 to 0 07:02:12 FLIGetFilterPos err=0 currentPosition=0 07:02:12 FLIGetStepsRemaining err=0 RemainingSteps=0 07:02:12 Filter is already there-color wheel unchanged 07:02:13 Received message from Master: op=Shutter serial=56824 07:02:13 Shutter LASER close 07:02:13 Received message from Camera: op=State serial=56826 07:02:13 GetSingleValue result=40 Value=cccccccc 07:02:13 SkyScan query 07:02:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:02:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:13 Parameters OK 07:02:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:13 Set A/D data flow result=40 07:02:13 Set A/D channel type result=40 07:02:13 Set A/D encoding result=40 07:02:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:13 Set channel filter=0.000000e+000 result=40 07:02:13 Config A/D Result=40 07:02:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:13 Get A/D filter: -9.255963e+061 result=40 07:02:13 Get A/D value=-858993460 result=40 07:02:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:13 Parameters OK 07:02:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:13 Set A/D data flow result=40 07:02:13 Set A/D channel type result=40 07:02:13 Set A/D encoding result=40 07:02:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:13 Set channel filter=0.000000e+000 result=40 07:02:13 Config A/D Result=40 07:02:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:13 Get A/D filter: -9.255963e+061 result=40 07:02:13 Get A/D value=-858993460 result=40 07:02:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:02:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:02:13 Aux= 07:02:13 Message to Camera, serial 56826 queued 07:02:50 Received message from Master: op=PointingHead serial=56839 07:02:50 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:02:50 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:02:50 Point started: ret=0 07:02:50 point_skyscan result=0 07:02:51 Check angles 07:02:51 SkyScan query 07:02:52 SkyScan query done: ret=0 az=153<-10200 ze=-21.825<-13455 Statuses=0009 0009 07:02:52 Msec=0 True Az=153 Ze=-21.825 Az status=0009 Ze status=0009 07:02:52 Check angles 07:02:52 SkyScan query 07:02:53 SkyScan query done: ret=0 az=135.525<-9035 ze=-0.84<-12056 Statuses=0009 0009 07:02:53 Msec=750 True Az=135.525 Ze=-0.84 Az status=0009 Ze status=0009 07:02:53 Check angles 07:02:53 SkyScan query 07:02:53 SkyScan query done: ret=0 az=117.975<-7865 ze=20.13<-10658 Statuses=0009 0009 07:02:53 Msec=1500 True Az=117.975 Ze=20.13 Az status=0009 Ze status=0009 07:02:53 Check angles 07:02:53 SkyScan query 07:02:54 SkyScan query done: ret=0 az=100.44<-6696 ze=41.085<-9261 Statuses=0009 0009 07:02:54 Msec=2250 True Az=100.44 Ze=41.085 Az status=0009 Ze status=0009 07:02:54 Check angles 07:02:54 SkyScan query 07:02:55 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 07:02:55 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 07:02:55 Check angles 07:02:55 SkyScan query 07:02:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:02:56 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:02:56 Message to Master queued w/err=0: serial=56839 error=0 07:03:01 Received message from Master: op=Filter serial=56840 07:03:01 Color wheel filter change from 0 to 0 07:03:01 FLIGetFilterPos err=0 currentPosition=0 07:03:01 FLIGetStepsRemaining err=0 RemainingSteps=0 07:03:01 Filter is already there-color wheel unchanged 07:03:01 Received message from Master: op=Shutter serial=56841 07:03:01 Shutter LASER close 07:03:01 Received message from Camera: op=State serial=56843 07:03:01 GetSingleValue result=40 Value=cccccccc 07:03:01 SkyScan query 07:03:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:03:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:01 Parameters OK 07:03:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:01 Set A/D data flow result=40 07:03:01 Set A/D channel type result=40 07:03:01 Set A/D encoding result=40 07:03:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:01 Set channel filter=0.000000e+000 result=40 07:03:01 Config A/D Result=40 07:03:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:01 Get A/D filter: -9.255963e+061 result=40 07:03:01 Get A/D value=-858993460 result=40 07:03:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:01 Parameters OK 07:03:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:01 Set A/D data flow result=40 07:03:01 Set A/D channel type result=40 07:03:01 Set A/D encoding result=40 07:03:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:01 Set channel filter=0.000000e+000 result=40 07:03:01 Config A/D Result=40 07:03:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:01 Get A/D filter: -9.255963e+061 result=40 07:03:01 Get A/D value=-858993460 result=40 07:03:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:03:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:03:01 Aux= 07:03:01 Message to Camera, serial 56843 queued 07:03:38 Received message from Master: op=PointingHead serial=56856 07:03:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:03:38 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:03:39 Point started: ret=0 07:03:39 point_skyscan result=0 07:03:39 Check angles 07:03:39 SkyScan query 07:03:40 SkyScan query done: ret=0 az=109.44<-7296 ze=38.49<-9434 Statuses=0009 0008 07:03:40 Msec=0 True Az=109.44 Ze=38.49 Az status=0009 Ze status=0008 07:03:40 Check angles 07:03:40 SkyScan query 07:03:41 SkyScan query done: ret=0 az=126.915<-8461 ze=38.505<-9433 Statuses=0009 0008 07:03:41 Msec=750 True Az=126.915 Ze=38.505 Az status=0009 Ze status=0008 07:03:41 Check angles 07:03:41 SkyScan query 07:03:41 SkyScan query done: ret=0 az=144.75<-9650 ze=38.505<-9433 Statuses=0009 0008 07:03:41 Msec=1500 True Az=144.75 Ze=38.505 Az status=0009 Ze status=0008 07:03:42 Check angles 07:03:42 SkyScan query 07:03:42 SkyScan query done: ret=0 az=162.615<-10841 ze=38.505<-9433 Statuses=0009 0008 07:03:42 Msec=2250 True Az=162.615 Ze=38.505 Az status=0009 Ze status=0008 07:03:42 Check angles 07:03:42 SkyScan query 07:03:43 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:03:43 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:03:43 Check angles 07:03:43 SkyScan query 07:03:44 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:03:44 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:03:44 Message to Master queued w/err=0: serial=56856 error=0 07:03:49 Received message from Master: op=Filter serial=56857 07:03:49 Color wheel filter change from 0 to 0 07:03:49 FLIGetFilterPos err=0 currentPosition=0 07:03:49 FLIGetStepsRemaining err=0 RemainingSteps=0 07:03:49 Filter is already there-color wheel unchanged 07:03:49 Received message from Master: op=Shutter serial=56858 07:03:49 Shutter LASER close 07:03:49 Received message from Camera: op=State serial=56860 07:03:49 GetSingleValue result=40 Value=cccccccc 07:03:49 SkyScan query 07:03:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:03:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:49 Parameters OK 07:03:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:49 Set A/D data flow result=40 07:03:49 Set A/D channel type result=40 07:03:49 Set A/D encoding result=40 07:03:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:49 Set channel filter=0.000000e+000 result=40 07:03:49 Config A/D Result=40 07:03:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:49 Get A/D filter: -9.255963e+061 result=40 07:03:49 Get A/D value=-858993460 result=40 07:03:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:49 Parameters OK 07:03:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:49 Set A/D data flow result=40 07:03:49 Set A/D channel type result=40 07:03:49 Set A/D encoding result=40 07:03:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:49 Set channel filter=0.000000e+000 result=40 07:03:49 Config A/D Result=40 07:03:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:49 Get A/D filter: -9.255963e+061 result=40 07:03:49 Get A/D value=-858993460 result=40 07:03:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:03:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:03:49 Aux= 07:03:49 Message to Camera, serial 56860 queued 07:04:26 Received message from Master: op=PointingHead serial=56873 07:04:26 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:04:26 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:04:27 Point started: ret=0 07:04:27 point_skyscan result=0 07:04:27 Check angles 07:04:27 SkyScan query 07:04:28 SkyScan query done: ret=0 az=153.135<-10209 ze=8.82<-11412 Statuses=0009 0009 07:04:28 Msec=0 True Az=153.135 Ze=8.82 Az status=0009 Ze status=0009 07:04:28 Check angles 07:04:28 SkyScan query 07:04:29 SkyScan query done: ret=0 az=135.795<-9053 ze=-12.12<-12808 Statuses=0009 0009 07:04:29 Msec=750 True Az=135.795 Ze=-12.12 Az status=0009 Ze status=0009 07:04:29 Check angles 07:04:29 SkyScan query 07:04:29 SkyScan query done: ret=0 az=118.155<-7877 ze=-33.075<-14205 Statuses=0009 0009 07:04:29 Msec=1500 True Az=118.155 Ze=-33.075 Az status=0009 Ze status=0009 07:04:30 Check angles 07:04:30 SkyScan query 07:04:30 SkyScan query done: ret=0 az=100.635<-6709 ze=-51.51<-15434 Statuses=0009 0009 07:04:30 Msec=2250 True Az=100.635 Ze=-51.51 Az status=0009 Ze status=0009 07:04:30 Check angles 07:04:30 SkyScan query 07:04:31 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 07:04:31 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 07:04:31 Check angles 07:04:31 SkyScan query 07:04:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:04:32 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:04:32 Message to Master queued w/err=0: serial=56873 error=0 07:04:37 Received message from Master: op=Filter serial=56874 07:04:37 Color wheel filter change from 0 to 0 07:04:37 FLIGetFilterPos err=0 currentPosition=0 07:04:37 FLIGetStepsRemaining err=0 RemainingSteps=0 07:04:37 Filter is already there-color wheel unchanged 07:04:37 Received message from Master: op=Shutter serial=56875 07:04:37 Shutter LASER close 07:04:37 Received message from Camera: op=State serial=56877 07:04:37 GetSingleValue result=40 Value=cccccccc 07:04:37 SkyScan query 07:04:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:04:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:38 Parameters OK 07:04:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:38 Set A/D data flow result=40 07:04:38 Set A/D channel type result=40 07:04:38 Set A/D encoding result=40 07:04:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:38 Set channel filter=0.000000e+000 result=40 07:04:38 Config A/D Result=40 07:04:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:38 Get A/D filter: -9.255963e+061 result=40 07:04:38 Get A/D value=-858993460 result=40 07:04:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:38 Parameters OK 07:04:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:38 Set A/D data flow result=40 07:04:38 Set A/D channel type result=40 07:04:38 Set A/D encoding result=40 07:04:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:38 Set channel filter=0.000000e+000 result=40 07:04:38 Config A/D Result=40 07:04:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:38 Get A/D filter: -9.255963e+061 result=40 07:04:38 Get A/D value=-858993460 result=40 07:04:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:04:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:04:38 Aux= 07:04:38 Message to Camera, serial 56877 queued 07:05:14 Received message from Master: op=PointingHead serial=56890 07:05:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:05:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:05:15 Point started: ret=0 07:05:15 point_skyscan result=0 07:05:15 Check angles 07:05:15 SkyScan query 07:05:16 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.84<-17456 Statuses=0009 0009 07:05:16 Msec=0 True Az=109.38 Ze=-81.84 Az status=0009 Ze status=0009 07:05:16 Check angles 07:05:16 SkyScan query 07:05:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.78<-18852 Statuses=0008 0009 07:05:17 Msec=750 True Az=112.995 Ze=-102.78 Az status=0008 Ze status=0009 07:05:17 Check angles 07:05:17 SkyScan query 07:05:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.735<-20249 Statuses=0008 0009 07:05:18 Msec=1500 True Az=112.995 Ze=-123.735 Az status=0008 Ze status=0009 07:05:18 Check angles 07:05:18 SkyScan query 07:05:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.66<-21644 Statuses=0008 0009 07:05:18 Msec=2250 True Az=112.995 Ze=-144.66 Az status=0008 Ze status=0009 07:05:18 Check angles 07:05:18 SkyScan query 07:05:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.615<-23041 Statuses=0008 0009 07:05:19 Msec=3000 True Az=112.995 Ze=-165.615 Az status=0008 Ze status=0009 07:05:19 Check angles 07:05:19 SkyScan query 07:05:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:05:20 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:05:20 Message to Master queued w/err=0: serial=56890 error=0 07:05:25 Received message from Master: op=Filter serial=56891 07:05:25 Color wheel filter change from 0 to 0 07:05:25 FLIGetFilterPos err=0 currentPosition=0 07:05:25 FLIGetStepsRemaining err=0 RemainingSteps=0 07:05:25 Filter is already there-color wheel unchanged 07:05:25 Received message from Master: op=Shutter serial=56892 07:05:25 Shutter LASER open 07:05:25 Received message from Camera: op=State serial=56894 07:05:25 GetSingleValue result=40 Value=cccccccc 07:05:25 SkyScan query 07:05:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:05:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:26 Parameters OK 07:05:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:26 Set A/D data flow result=40 07:05:26 Set A/D channel type result=40 07:05:26 Set A/D encoding result=40 07:05:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:26 Set channel filter=0.000000e+000 result=40 07:05:26 Config A/D Result=40 07:05:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:26 Get A/D filter: -9.255963e+061 result=40 07:05:26 Get A/D value=-858993460 result=40 07:05:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:26 Parameters OK 07:05:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:26 Set A/D data flow result=40 07:05:26 Set A/D channel type result=40 07:05:26 Set A/D encoding result=40 07:05:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:26 Set channel filter=0.000000e+000 result=40 07:05:26 Config A/D Result=40 07:05:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:26 Get A/D filter: -9.255963e+061 result=40 07:05:26 Get A/D value=-858993460 result=40 07:05:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:05:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:05:26 Aux= 07:05:26 Message to Camera, serial 56894 queued 07:05:34 Received message from Master: op=Shutter serial=56904 07:05:34 Shutter LASER close 07:05:35 Received message from Master: op=PointingHead serial=56908 07:05:35 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:05:35 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:05:35 Point started: ret=0 07:05:35 point_skyscan result=0 07:05:36 Check angles 07:05:36 SkyScan query 07:05:36 SkyScan query done: ret=0 az=90.15<-6010 ze=157.515<-1499 Statuses=0009 0009 07:05:36 Msec=0 True Az=90.15 Ze=157.515 Az status=0009 Ze status=0009 07:05:36 Check angles 07:05:36 SkyScan query 07:05:37 SkyScan query done: ret=0 az=72.675<-4845 ze=136.53<-2898 Statuses=0009 0009 07:05:37 Msec=750 True Az=72.675 Ze=136.53 Az status=0009 Ze status=0009 07:05:37 Check angles 07:05:37 SkyScan query 07:05:38 SkyScan query done: ret=0 az=54.885<-3659 ze=115.185<-4321 Statuses=0009 0009 07:05:38 Msec=1500 True Az=54.885 Ze=115.185 Az status=0009 Ze status=0009 07:05:38 Check angles 07:05:38 SkyScan query 07:05:39 SkyScan query done: ret=0 az=40.875<-2725 ze=94.185<-5721 Statuses=0009 0009 07:05:39 Msec=2250 True Az=40.875 Ze=94.185 Az status=0009 Ze status=0009 07:05:39 Check angles 07:05:39 SkyScan query 07:05:39 SkyScan query done: ret=0 az=40.995<-2733 ze=73.23<-7118 Statuses=0008 0009 07:05:39 Msec=3000 True Az=40.995 Ze=73.23 Az status=0008 Ze status=0009 07:05:39 Check angles 07:05:39 SkyScan query 07:05:40 SkyScan query done: ret=0 az=40.995<-2733 ze=52.725<-8485 Statuses=0008 0009 07:05:40 Msec=3750 True Az=40.995 Ze=52.725 Az status=0008 Ze status=0009 07:05:40 Check angles 07:05:40 SkyScan query 07:05:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:05:41 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 [UTC 2018-12-11 07:05:41] 07:05:41 Message to Master queued w/err=0: serial=56908 error=0 07:05:46 Received message from Master: op=Filter serial=56909 07:05:46 Color wheel filter change from 0 to 0 07:05:46 FLIGetFilterPos err=0 currentPosition=0 07:05:46 FLIGetStepsRemaining err=0 RemainingSteps=0 07:05:46 Filter is already there-color wheel unchanged 07:05:46 Received message from Master: op=Shutter serial=56910 07:05:46 Shutter LASER close 07:05:46 Received message from Camera: op=State serial=56912 07:05:46 GetSingleValue result=40 Value=cccccccc 07:05:46 SkyScan query 07:05:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:05:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:47 Parameters OK 07:05:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:47 Set A/D data flow result=40 07:05:47 Set A/D channel type result=40 07:05:47 Set A/D encoding result=40 07:05:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:47 Set channel filter=0.000000e+000 result=40 07:05:47 Config A/D Result=40 07:05:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:47 Get A/D filter: -9.255963e+061 result=40 07:05:47 Get A/D value=-858993460 result=40 07:05:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:47 Parameters OK 07:05:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:47 Set A/D data flow result=40 07:05:47 Set A/D channel type result=40 07:05:47 Set A/D encoding result=40 07:05:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:47 Set channel filter=0.000000e+000 result=40 07:05:47 Config A/D Result=40 07:05:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:47 Get A/D filter: -9.255963e+061 result=40 07:05:47 Get A/D value=-858993460 result=40 07:05:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:05:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:05:47 Aux= 07:05:47 Message to Camera, serial 56912 queued 07:06:23 Received message from Master: op=PointingHead serial=56924 07:06:23 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:06:23 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:06:23 Point started: ret=0 07:06:23 point_skyscan result=0 07:06:24 Check angles 07:06:24 SkyScan query 07:06:24 SkyScan query done: ret=0 az=63.825<-4255 ze=66.555<-7563 Statuses=0009 0008 07:06:24 Msec=0 True Az=63.825 Ze=66.555 Az status=0009 Ze status=0008 07:06:24 Check angles 07:06:24 SkyScan query 07:06:25 SkyScan query done: ret=0 az=81.12<-5408 ze=66.51<-7566 Statuses=0009 0008 07:06:25 Msec=750 True Az=81.12 Ze=66.51 Az status=0009 Ze status=0008 07:06:25 Check angles 07:06:25 SkyScan query 07:06:26 SkyScan query done: ret=0 az=98.715<-6581 ze=66.495<-7567 Statuses=0009 0008 07:06:26 Msec=1500 True Az=98.715 Ze=66.495 Az status=0009 Ze status=0008 07:06:26 Check angles 07:06:26 SkyScan query 07:06:27 SkyScan query done: ret=0 az=116.25<-7750 ze=66.495<-7567 Statuses=0009 0008 07:06:27 Msec=2250 True Az=116.25 Ze=66.495 Az status=0009 Ze status=0008 07:06:27 Check angles 07:06:27 SkyScan query 07:06:27 SkyScan query done: ret=0 az=133.8<-8920 ze=66.495<-7567 Statuses=0009 0008 07:06:27 Msec=3000 True Az=133.8 Ze=66.495 Az status=0009 Ze status=0008 07:06:27 Check angles 07:06:27 SkyScan query 07:06:28 SkyScan query done: ret=0 az=151.185<-10079 ze=66.495<-7567 Statuses=0009 0008 07:06:28 Msec=3750 True Az=151.185 Ze=66.495 Az status=0009 Ze status=0008 07:06:28 Check angles 07:06:28 SkyScan query 07:06:29 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:06:29 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 07:06:29 Message to Master queued w/err=0: serial=56924 error=0 07:06:34 Received message from Master: op=Filter serial=56925 07:06:34 Color wheel filter change from 0 to 0 07:06:34 FLIGetFilterPos err=0 currentPosition=0 07:06:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:06:34 Filter is already there-color wheel unchanged 07:06:34 Received message from Master: op=Shutter serial=56926 07:06:34 Shutter LASER close 07:06:34 Received message from Camera: op=State serial=56928 07:06:34 GetSingleValue result=40 Value=cccccccc 07:06:34 SkyScan query 07:06:35 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:06:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:35 Parameters OK 07:06:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:35 Set A/D data flow result=40 07:06:35 Set A/D channel type result=40 07:06:35 Set A/D encoding result=40 07:06:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:35 Set channel filter=0.000000e+000 result=40 07:06:35 Config A/D Result=40 07:06:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:35 Get A/D filter: -9.255963e+061 result=40 07:06:35 Get A/D value=-858993460 result=40 07:06:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:35 Parameters OK 07:06:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:35 Set A/D data flow result=40 07:06:35 Set A/D channel type result=40 07:06:35 Set A/D encoding result=40 07:06:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:35 Set channel filter=0.000000e+000 result=40 07:06:35 Config A/D Result=40 07:06:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:35 Get A/D filter: -9.255963e+061 result=40 07:06:35 Get A/D value=-858993460 result=40 07:06:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:35 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:06:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:06:35 Aux= 07:06:35 Message to Camera, serial 56928 queued 07:07:11 Received message from Master: op=PointingHead serial=56941 07:07:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:07:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:07:12 Point started: ret=0 07:07:12 point_skyscan result=0 07:07:13 Check angles 07:07:13 SkyScan query 07:07:13 SkyScan query done: ret=0 az=134.64<-8976 ze=36.405<-9573 Statuses=0009 0009 07:07:13 Msec=0 True Az=134.64 Ze=36.405 Az status=0009 Ze status=0009 07:07:13 Check angles 07:07:13 SkyScan query 07:07:14 SkyScan query done: ret=0 az=117.12<-7808 ze=15.465<-10969 Statuses=0009 0009 07:07:14 Msec=750 True Az=117.12 Ze=15.465 Az status=0009 Ze status=0009 07:07:14 Check angles 07:07:14 SkyScan query 07:07:15 SkyScan query done: ret=0 az=99.45<-6630 ze=-6.015<-12401 Statuses=0009 0009 07:07:15 Msec=1500 True Az=99.45 Ze=-6.015 Az status=0009 Ze status=0009 07:07:15 Check angles 07:07:15 SkyScan query 07:07:15 SkyScan query done: ret=0 az=81.555<-5437 ze=-27.375<-13825 Statuses=0009 0009 07:07:15 Msec=2250 True Az=81.555 Ze=-27.375 Az status=0009 Ze status=0009 07:07:16 Check angles 07:07:16 SkyScan query 07:07:16 SkyScan query done: ret=0 az=63.825<-4255 ze=-38.565<-14571 Statuses=0009 0008 07:07:16 Msec=3000 True Az=63.825 Ze=-38.565 Az status=0009 Ze status=0008 07:07:16 Check angles 07:07:16 SkyScan query 07:07:17 SkyScan query done: ret=0 az=46.365<-3091 ze=-38.52<-14568 Statuses=0009 0008 07:07:17 Msec=3750 True Az=46.365 Ze=-38.52 Az status=0009 Ze status=0008 07:07:17 Check angles 07:07:17 SkyScan query 07:07:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:07:18 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:07:18 Message to Master queued w/err=0: serial=56941 error=0 07:07:23 Received message from Master: op=Filter serial=56942 07:07:23 Color wheel filter change from 0 to 0 07:07:23 FLIGetFilterPos err=0 currentPosition=0 07:07:23 FLIGetStepsRemaining err=0 RemainingSteps=0 07:07:23 Filter is already there-color wheel unchanged 07:07:23 Received message from Master: op=Shutter serial=56943 07:07:23 Shutter LASER close 07:07:23 Received message from Camera: op=State serial=56945 07:07:23 GetSingleValue result=40 Value=cccccccc 07:07:23 SkyScan query 07:07:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:07:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:23 Parameters OK 07:07:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:23 Set A/D data flow result=40 07:07:23 Set A/D channel type result=40 07:07:23 Set A/D encoding result=40 07:07:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:23 Set channel filter=0.000000e+000 result=40 07:07:23 Config A/D Result=40 07:07:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:23 Get A/D filter: -9.255963e+061 result=40 07:07:23 Get A/D value=-858993460 result=40 07:07:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:23 Parameters OK 07:07:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:23 Set A/D data flow result=40 07:07:23 Set A/D channel type result=40 07:07:23 Set A/D encoding result=40 07:07:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:23 Set channel filter=0.000000e+000 result=40 07:07:23 Config A/D Result=40 07:07:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:23 Get A/D filter: -9.255963e+061 result=40 07:07:23 Get A/D value=-858993460 result=40 07:07:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:07:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:07:23 Aux= 07:07:23 Message to Camera, serial 56945 queued 07:08:00 Received message from Master: op=PointingHead serial=56958 07:08:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:08:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:08:01 Point started: ret=0 07:08:01 point_skyscan result=0 07:08:01 Check angles 07:08:01 SkyScan query 07:08:02 SkyScan query done: ret=0 az=63.81<-4254 ze=-67.995<-16533 Statuses=0009 0009 07:08:02 Msec=0 True Az=63.81 Ze=-67.995 Az status=0009 Ze status=0009 07:08:02 Check angles 07:08:02 SkyScan query 07:08:03 SkyScan query done: ret=0 az=81.195<-5413 ze=-88.965<-17931 Statuses=0009 0009 07:08:03 Msec=750 True Az=81.195 Ze=-88.965 Az status=0009 Ze status=0009 07:08:03 Check angles 07:08:03 SkyScan query 07:08:03 SkyScan query done: ret=0 az=98.775<-6585 ze=-109.92<-19328 Statuses=0009 0009 07:08:03 Msec=1500 True Az=98.775 Ze=-109.92 Az status=0009 Ze status=0009 07:08:04 Check angles 07:08:04 SkyScan query 07:08:04 SkyScan query done: ret=0 az=116.34<-7756 ze=-130.875<-20725 Statuses=0009 0009 07:08:04 Msec=2250 True Az=116.34 Ze=-130.875 Az status=0009 Ze status=0009 07:08:04 Check angles 07:08:04 SkyScan query 07:08:05 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 07:08:05 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 07:08:05 Check angles 07:08:05 SkyScan query 07:08:06 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:08:06 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:08:06 Message to Master queued w/err=0: serial=56958 error=0 07:08:11 Received message from Master: op=Filter serial=56959 07:08:11 Color wheel filter change from 0 to 0 07:08:11 FLIGetFilterPos err=0 currentPosition=0 07:08:11 FLIGetStepsRemaining err=0 RemainingSteps=0 07:08:11 Filter is already there-color wheel unchanged 07:08:11 Received message from Master: op=Shutter serial=56960 07:08:11 Shutter LASER close 07:08:11 Received message from Camera: op=State serial=56962 07:08:11 GetSingleValue result=40 Value=cccccccc 07:08:11 SkyScan query 07:08:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:08:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:11 Parameters OK 07:08:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:11 Set A/D data flow result=40 07:08:11 Set A/D channel type result=40 07:08:11 Set A/D encoding result=40 07:08:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:11 Set channel filter=0.000000e+000 result=40 07:08:11 Config A/D Result=40 07:08:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:11 Get A/D filter: -9.255963e+061 result=40 07:08:11 Get A/D value=-858993460 result=40 07:08:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:11 Parameters OK 07:08:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:11 Set A/D data flow result=40 07:08:11 Set A/D channel type result=40 07:08:11 Set A/D encoding result=40 07:08:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:11 Set channel filter=0.000000e+000 result=40 07:08:11 Config A/D Result=40 07:08:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:11 Get A/D filter: -9.255963e+061 result=40 07:08:11 Get A/D value=-858993460 result=40 07:08:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:08:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:08:11 Aux= 07:08:11 Message to Camera, serial 56962 queued 07:08:48 Received message from Master: op=PointingHead serial=56975 07:08:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:08:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:08:49 Point started: ret=0 07:08:49 point_skyscan result=0 07:08:49 Check angles 07:08:49 SkyScan query 07:08:50 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.27<-23418 Statuses=0009 0009 07:08:50 Msec=0 True Az=113.01 Ze=-171.27 Az status=0009 Ze status=0009 07:08:50 Check angles 07:08:50 SkyScan query 07:08:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:08:51 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:08:51 Message to Master queued w/err=0: serial=56975 error=0 07:08:56 Received message from Master: op=Filter serial=56976 07:08:56 Color wheel filter change from 0 to 0 07:08:56 FLIGetFilterPos err=0 currentPosition=0 07:08:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:08:56 Filter is already there-color wheel unchanged 07:08:56 Received message from Master: op=Shutter serial=56977 07:08:56 Shutter LASER open 07:08:56 Received message from Camera: op=State serial=56979 07:08:56 GetSingleValue result=40 Value=cccccccc 07:08:56 SkyScan query 07:08:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:08:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:57 Parameters OK 07:08:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:57 Set A/D data flow result=40 07:08:57 Set A/D channel type result=40 07:08:57 Set A/D encoding result=40 07:08:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:57 Set channel filter=0.000000e+000 result=40 07:08:57 Config A/D Result=40 07:08:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:57 Get A/D filter: -9.255963e+061 result=40 07:08:57 Get A/D value=-858993460 result=40 07:08:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:57 Parameters OK 07:08:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:57 Set A/D data flow result=40 07:08:57 Set A/D channel type result=40 07:08:57 Set A/D encoding result=40 07:08:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:57 Set channel filter=0.000000e+000 result=40 07:08:57 Config A/D Result=40 07:08:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:57 Get A/D filter: -9.255963e+061 result=40 07:08:57 Get A/D value=-858993460 result=40 07:08:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:08:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:08:57 Aux= 07:08:57 Message to Camera, serial 56979 queued 07:09:05 Received message from Master: op=Shutter serial=56989 07:09:05 Shutter LASER close 07:09:06 Received message from Master: op=PointingHead serial=56993 07:09:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:09:06 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:09:06 Point started: ret=0 07:09:06 point_skyscan result=0 07:09:07 Check angles 07:09:07 SkyScan query 07:09:07 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.22<-21548 Statuses=0009 0009 07:09:07 Msec=0 True Az=135.945 Ze=-143.22 Az status=0009 Ze status=0009 07:09:08 Check angles 07:09:08 SkyScan query 07:09:08 SkyScan query done: ret=0 az=153.42<-10228 ze=-122.265<-20151 Statuses=0009 0009 07:09:08 Msec=750 True Az=153.42 Ze=-122.265 Az status=0009 Ze status=0009 07:09:08 Check angles 07:09:08 SkyScan query 07:09:09 SkyScan query done: ret=0 az=170.91<-11394 ze=-101.37<-18758 Statuses=0009 0009 07:09:09 Msec=1500 True Az=170.91 Ze=-101.37 Az status=0009 Ze status=0009 07:09:09 Check angles 07:09:09 SkyScan query 07:09:10 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.95<-17330 Statuses=0008 0009 07:09:10 Msec=2250 True Az=176.025 Ze=-79.95 Az status=0008 Ze status=0009 07:09:10 Check angles 07:09:10 SkyScan query 07:09:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.95<-15930 Statuses=0008 0009 07:09:10 Msec=3000 True Az=176.01 Ze=-58.95 Az status=0008 Ze status=0009 07:09:11 Check angles 07:09:11 SkyScan query 07:09:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 07:09:11 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 07:09:11 Message to Master queued w/err=0: serial=56993 error=0 07:09:16 Received message from Master: op=Filter serial=56994 07:09:16 Color wheel filter change from 0 to 0 07:09:16 FLIGetFilterPos err=0 currentPosition=0 07:09:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:09:16 Filter is already there-color wheel unchanged 07:09:16 Received message from Master: op=Shutter serial=56995 07:09:16 Shutter LASER close 07:09:17 Received message from Camera: op=State serial=56997 07:09:17 GetSingleValue result=40 Value=cccccccc 07:09:17 SkyScan query 07:09:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:09:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:17 Parameters OK 07:09:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:17 Set A/D data flow result=40 07:09:17 Set A/D channel type result=40 07:09:17 Set A/D encoding result=40 07:09:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:17 Set channel filter=0.000000e+000 result=40 07:09:17 Config A/D Result=40 07:09:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:17 Get A/D filter: -9.255963e+061 result=40 07:09:17 Get A/D value=-858993460 result=40 07:09:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:17 Parameters OK 07:09:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:17 Set A/D data flow result=40 07:09:17 Set A/D channel type result=40 07:09:17 Set A/D encoding result=40 07:09:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:17 Set channel filter=0.000000e+000 result=40 07:09:17 Config A/D Result=40 07:09:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:17 Get A/D filter: -9.255963e+061 result=40 07:09:17 Get A/D value=-858993460 result=40 07:09:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:09:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:09:17 Aux= 07:09:17 Message to Camera, serial 56997 queued 07:09:54 Received message from Master: op=PointingHead serial=57010 07:09:54 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:09:54 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:09:54 Point started: ret=0 07:09:54 point_skyscan result=0 07:09:55 Check angles 07:09:55 SkyScan query 07:09:56 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.375<-13425 Statuses=0009 0009 07:09:56 Msec=0 True Az=152.775 Ze=-21.375 Az status=0009 Ze status=0009 07:09:56 Check angles 07:09:56 SkyScan query 07:09:56 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.495<-12033 Statuses=0009 0009 07:09:56 Msec=750 True Az=135.39 Ze=-0.495 Az status=0009 Ze status=0009 07:09:57 Check angles 07:09:57 SkyScan query 07:09:57 SkyScan query done: ret=0 az=117.33<-7822 ze=20.88<-10608 Statuses=0009 0009 07:09:57 Msec=1500 True Az=117.33 Ze=20.88 Az status=0009 Ze status=0009 07:09:57 Check angles 07:09:57 SkyScan query 07:09:58 SkyScan query done: ret=0 az=99.69<-6646 ze=42.27<-9182 Statuses=0009 0009 07:09:58 Msec=2250 True Az=99.69 Ze=42.27 Az status=0009 Ze status=0009 07:09:58 Check angles 07:09:58 SkyScan query 07:09:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 07:09:59 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 07:09:59 Check angles 07:09:59 SkyScan query 07:09:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:09:59 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:09:59 Message to Master queued w/err=0: serial=57010 error=0 07:10:04 Received message from Master: op=Filter serial=57011 07:10:04 Color wheel filter change from 0 to 0 07:10:04 FLIGetFilterPos err=0 currentPosition=0 07:10:04 FLIGetStepsRemaining err=0 RemainingSteps=0 07:10:04 Filter is already there-color wheel unchanged 07:10:05 Received message from Master: op=Shutter serial=57012 07:10:05 Shutter LASER close 07:10:05 Received message from Camera: op=State serial=57014 07:10:05 GetSingleValue result=40 Value=cccccccc 07:10:05 SkyScan query 07:10:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:10:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:05 Parameters OK 07:10:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:05 Set A/D data flow result=40 07:10:05 Set A/D channel type result=40 07:10:05 Set A/D encoding result=40 07:10:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:05 Set channel filter=0.000000e+000 result=40 07:10:05 Config A/D Result=40 07:10:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:05 Get A/D filter: -9.255963e+061 result=40 07:10:05 Get A/D value=-858993460 result=40 07:10:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:05 Parameters OK 07:10:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:05 Set A/D data flow result=40 07:10:05 Set A/D channel type result=40 07:10:05 Set A/D encoding result=40 07:10:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:05 Set channel filter=0.000000e+000 result=40 07:10:05 Config A/D Result=40 07:10:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:05 Get A/D filter: -9.255963e+061 result=40 07:10:05 Get A/D value=-858993460 result=40 07:10:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:10:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:10:05 Aux= 07:10:05 Message to Camera, serial 57014 queued 07:10:42 Received message from Master: op=PointingHead serial=57027 07:10:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:10:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:10:42 Point started: ret=0 07:10:42 point_skyscan result=0 07:10:43 Check angles 07:10:43 SkyScan query 07:10:44 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 07:10:44 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 07:10:44 Check angles 07:10:44 SkyScan query 07:10:45 SkyScan query done: ret=0 az=126.36<-8424 ze=38.505<-9433 Statuses=0009 0008 07:10:45 Msec=750 True Az=126.36 Ze=38.505 Az status=0009 Ze status=0008 07:10:45 Check angles 07:10:45 SkyScan query 07:10:45 SkyScan query done: ret=0 az=143.85<-9590 ze=38.505<-9433 Statuses=0009 0008 07:10:45 Msec=1500 True Az=143.85 Ze=38.505 Az status=0009 Ze status=0008 07:10:45 Check angles 07:10:45 SkyScan query 07:10:46 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 07:10:46 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 07:10:46 Check angles 07:10:46 SkyScan query 07:10:47 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 07:10:47 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 07:10:47 Check angles 07:10:47 SkyScan query 07:10:48 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:10:48 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:10:48 Message to Master queued w/err=0: serial=57027 error=0 07:10:53 Received message from Master: op=Filter serial=57028 07:10:53 Color wheel filter change from 0 to 0 07:10:53 FLIGetFilterPos err=0 currentPosition=0 07:10:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:10:53 Filter is already there-color wheel unchanged 07:10:53 Received message from Master: op=Shutter serial=57029 07:10:53 Shutter LASER close 07:10:53 Received message from Camera: op=State serial=57031 07:10:53 GetSingleValue result=40 Value=cccccccc 07:10:53 SkyScan query 07:10:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:10:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:53 Parameters OK 07:10:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:53 Set A/D data flow result=40 07:10:53 Set A/D channel type result=40 07:10:53 Set A/D encoding result=40 07:10:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:53 Set channel filter=0.000000e+000 result=40 07:10:53 Config A/D Result=40 07:10:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:53 Get A/D filter: -9.255963e+061 result=40 07:10:53 Get A/D value=-858993460 result=40 07:10:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:53 Parameters OK 07:10:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:53 Set A/D data flow result=40 07:10:53 Set A/D channel type result=40 07:10:53 Set A/D encoding result=40 07:10:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:53 Set channel filter=0.000000e+000 result=40 07:10:53 Config A/D Result=40 07:10:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:53 Get A/D filter: -9.255963e+061 result=40 07:10:53 Get A/D value=-858993460 result=40 07:10:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:10:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:10:53 Aux= 07:10:53 Message to Camera, serial 57031 queued 07:11:30 Received message from Master: op=PointingHead serial=57044 07:11:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:11:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:11:31 Point started: ret=0 07:11:31 point_skyscan result=0 07:11:31 Check angles 07:11:31 SkyScan query 07:11:32 SkyScan query done: ret=0 az=152.685<-10179 ze=8.19<-11454 Statuses=0009 0009 07:11:32 Msec=0 True Az=152.685 Ze=8.19 Az status=0009 Ze status=0009 07:11:32 Check angles 07:11:32 SkyScan query 07:11:33 SkyScan query done: ret=0 az=135.075<-9005 ze=-12.75<-12850 Statuses=0009 0009 07:11:33 Msec=750 True Az=135.075 Ze=-12.75 Az status=0009 Ze status=0009 07:11:33 Check angles 07:11:33 SkyScan query 07:11:33 SkyScan query done: ret=0 az=117.435<-7829 ze=-33.69<-14246 Statuses=0009 0009 07:11:33 Msec=1500 True Az=117.435 Ze=-33.69 Az status=0009 Ze status=0009 07:11:34 Check angles 07:11:34 SkyScan query 07:11:34 SkyScan query done: ret=0 az=100.065<-6671 ze=-51.555<-15437 Statuses=0009 0009 07:11:34 Msec=2250 True Az=100.065 Ze=-51.555 Az status=0009 Ze status=0009 07:11:34 Check angles 07:11:34 SkyScan query 07:11:35 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 07:11:35 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 07:11:35 Check angles 07:11:35 SkyScan query 07:11:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:11:36 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:11:36 Message to Master queued w/err=0: serial=57044 error=0 07:11:41 Received message from Master: op=Filter serial=57045 07:11:41 Color wheel filter change from 0 to 0 07:11:41 FLIGetFilterPos err=0 currentPosition=0 07:11:41 FLIGetStepsRemaining err=0 RemainingSteps=0 07:11:41 Filter is already there-color wheel unchanged 07:11:41 Received message from Master: op=Shutter serial=57046 07:11:41 Shutter LASER close 07:11:41 Received message from Camera: op=State serial=57048 07:11:41 GetSingleValue result=40 Value=cccccccc 07:11:41 SkyScan query 07:11:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:11:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:41 Parameters OK 07:11:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:41 Set A/D data flow result=40 07:11:41 Set A/D channel type result=40 07:11:41 Set A/D encoding result=40 07:11:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:41 Set channel filter=0.000000e+000 result=40 07:11:41 Config A/D Result=40 07:11:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:41 Get A/D filter: -9.255963e+061 result=40 07:11:41 Get A/D value=-858993460 result=40 07:11:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:41 Parameters OK 07:11:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:41 Set A/D data flow result=40 07:11:41 Set A/D channel type result=40 07:11:41 Set A/D encoding result=40 07:11:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:41 Set channel filter=0.000000e+000 result=40 07:11:41 Config A/D Result=40 07:11:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:41 Get A/D filter: -9.255963e+061 result=40 07:11:41 Get A/D value=-858993460 result=40 07:11:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:11:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:11:41 Aux= 07:11:41 Message to Camera, serial 57048 queued 07:12:17 Received message from Master: op=PointingHead serial=57060 07:12:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:12:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:12:18 Point started: ret=0 07:12:18 point_skyscan result=0 07:12:18 Check angles 07:12:18 SkyScan query 07:12:19 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.585<-17439 Statuses=0009 0009 07:12:19 Msec=0 True Az=109.185 Ze=-81.585 Az status=0009 Ze status=0009 07:12:19 Check angles 07:12:19 SkyScan query 07:12:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.525<-18835 Statuses=0008 0009 07:12:20 Msec=750 True Az=112.995 Ze=-102.525 Az status=0008 Ze status=0009 07:12:20 Check angles 07:12:20 SkyScan query 07:12:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.93<-20262 Statuses=0008 0009 07:12:21 Msec=1500 True Az=112.995 Ze=-123.93 Az status=0008 Ze status=0009 07:12:21 Check angles 07:12:21 SkyScan query 07:12:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.855<-21657 Statuses=0008 0009 07:12:21 Msec=2250 True Az=112.995 Ze=-144.855 Az status=0008 Ze status=0009 07:12:21 Check angles 07:12:21 SkyScan query 07:12:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.795<-23053 Statuses=0008 0009 07:12:22 Msec=3000 True Az=112.995 Ze=-165.795 Az status=0008 Ze status=0009 07:12:22 Check angles 07:12:22 SkyScan query 07:12:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:12:23 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:12:23 Message to Master queued w/err=0: serial=57060 error=0 07:12:28 Received message from Master: op=Filter serial=57061 07:12:28 Color wheel filter change from 0 to 0 07:12:28 FLIGetFilterPos err=0 currentPosition=0 07:12:28 FLIGetStepsRemaining err=0 RemainingSteps=0 07:12:28 Filter is already there-color wheel unchanged 07:12:28 Received message from Master: op=Shutter serial=57062 07:12:28 Shutter LASER open 07:12:28 Received message from Camera: op=State serial=57064 07:12:28 GetSingleValue result=40 Value=cccccccc 07:12:28 SkyScan query 07:12:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:12:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:29 Parameters OK 07:12:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:29 Set A/D data flow result=40 07:12:29 Set A/D channel type result=40 07:12:29 Set A/D encoding result=40 07:12:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:29 Set channel filter=0.000000e+000 result=40 07:12:29 Config A/D Result=40 07:12:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:29 Get A/D filter: -9.255963e+061 result=40 07:12:29 Get A/D value=-858993460 result=40 07:12:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:29 Parameters OK 07:12:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:29 Set A/D data flow result=40 07:12:29 Set A/D channel type result=40 07:12:29 Set A/D encoding result=40 07:12:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:29 Set channel filter=0.000000e+000 result=40 07:12:29 Config A/D Result=40 07:12:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:29 Get A/D filter: -9.255963e+061 result=40 07:12:29 Get A/D value=-858993460 result=40 07:12:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:12:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:12:29 Aux= 07:12:29 Message to Camera, serial 57064 queued 07:12:37 Received message from Master: op=Shutter serial=57074 07:12:37 Shutter LASER close 07:12:38 Received message from Master: op=PointingHead serial=57078 07:12:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:12:38 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:12:38 Point started: ret=0 07:12:38 point_skyscan result=0 07:12:39 Check angles 07:12:39 SkyScan query 07:12:39 SkyScan query done: ret=0 az=89.91<-5994 ze=157.29<-1514 Statuses=0009 0009 07:12:39 Msec=0 True Az=89.91 Ze=157.29 Az status=0009 Ze status=0009 07:12:39 Check angles 07:12:39 SkyScan query 07:12:40 SkyScan query done: ret=0 az=72.06<-4804 ze=135.9<-2940 Statuses=0009 0009 07:12:40 Msec=750 True Az=72.06 Ze=135.9 Az status=0009 Ze status=0009 07:12:40 Check angles 07:12:40 SkyScan query 07:12:41 SkyScan query done: ret=0 az=54.81<-3654 ze=114.93<-4338 Statuses=0009 0009 07:12:41 Msec=1500 True Az=54.81 Ze=114.93 Az status=0009 Ze status=0009 07:12:41 Check angles 07:12:41 SkyScan query 07:12:42 SkyScan query done: ret=0 az=40.89<-2726 ze=93.975<-5735 Statuses=0009 0009 07:12:42 Msec=2250 True Az=40.89 Ze=93.975 Az status=0009 Ze status=0009 07:12:42 Check angles 07:12:42 SkyScan query 07:12:42 SkyScan query done: ret=0 az=40.995<-2733 ze=73.005<-7133 Statuses=0008 0009 07:12:42 Msec=3000 True Az=40.995 Ze=73.005 Az status=0008 Ze status=0009 07:12:42 Check angles 07:12:42 SkyScan query 07:12:43 SkyScan query done: ret=0 az=40.995<-2733 ze=52.605<-8493 Statuses=0008 0009 07:12:43 Msec=3750 True Az=40.995 Ze=52.605 Az status=0008 Ze status=0009 07:12:43 Check angles 07:12:43 SkyScan query 07:12:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:12:44 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:12:44 Message to Master queued w/err=0: serial=57078 error=0 07:12:49 Received message from Master: op=Filter serial=57079 07:12:49 Color wheel filter change from 0 to 0 07:12:49 FLIGetFilterPos err=0 currentPosition=0 07:12:49 FLIGetStepsRemaining err=0 RemainingSteps=0 07:12:49 Filter is already there-color wheel unchanged 07:12:49 Received message from Master: op=Shutter serial=57080 07:12:49 Shutter LASER close 07:12:49 Received message from Camera: op=State serial=57082 07:12:49 GetSingleValue result=40 Value=cccccccc 07:12:49 SkyScan query 07:12:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:12:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:50 Parameters OK 07:12:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:50 Set A/D data flow result=40 07:12:50 Set A/D channel type result=40 07:12:50 Set A/D encoding result=40 07:12:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:50 Set channel filter=0.000000e+000 result=40 07:12:50 Config A/D Result=40 07:12:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:50 Get A/D filter: -9.255963e+061 result=40 07:12:50 Get A/D value=-858993460 result=40 07:12:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:50 Parameters OK 07:12:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:50 Set A/D data flow result=40 07:12:50 Set A/D channel type result=40 07:12:50 Set A/D encoding result=40 07:12:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:50 Set channel filter=0.000000e+000 result=40 07:12:50 Config A/D Result=40 07:12:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:50 Get A/D filter: -9.255963e+061 result=40 07:12:50 Get A/D value=-858993460 result=40 07:12:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:12:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:12:50 Aux= 07:12:50 Message to Camera, serial 57082 queued 07:13:27 Received message from Master: op=PointingHead serial=57095 07:13:27 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:13:27 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:13:27 Point started: ret=0 07:13:27 point_skyscan result=0 07:13:28 Check angles 07:13:28 SkyScan query 07:13:28 SkyScan query done: ret=0 az=64.035<-4269 ze=66.555<-7563 Statuses=0009 0008 07:13:28 Msec=0 True Az=64.035 Ze=66.555 Az status=0009 Ze status=0008 07:13:28 Check angles 07:13:28 SkyScan query 07:13:29 SkyScan query done: ret=0 az=81.375<-5425 ze=66.495<-7567 Statuses=0009 0008 07:13:29 Msec=750 True Az=81.375 Ze=66.495 Az status=0009 Ze status=0008 07:13:29 Check angles 07:13:29 SkyScan query 07:13:30 SkyScan query done: ret=0 az=99.42<-6628 ze=66.495<-7567 Statuses=0009 0008 07:13:30 Msec=1500 True Az=99.42 Ze=66.495 Az status=0009 Ze status=0008 07:13:30 Check angles 07:13:30 SkyScan query 07:13:31 SkyScan query done: ret=0 az=117.375<-7825 ze=66.495<-7567 Statuses=0009 0008 07:13:31 Msec=2250 True Az=117.375 Ze=66.495 Az status=0009 Ze status=0008 07:13:31 Check angles 07:13:31 SkyScan query 07:13:31 SkyScan query done: ret=0 az=134.775<-8985 ze=66.495<-7567 Statuses=0009 0008 07:13:31 Msec=3000 True Az=134.775 Ze=66.495 Az status=0009 Ze status=0008 07:13:31 Check angles 07:13:31 SkyScan query 07:13:32 SkyScan query done: ret=0 az=152.535<-10169 ze=66.495<-7567 Statuses=0009 0008 07:13:32 Msec=3750 True Az=152.535 Ze=66.495 Az status=0009 Ze status=0008 07:13:32 Check angles 07:13:32 SkyScan query 07:13:33 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:13:33 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 07:13:33 Message to Master queued w/err=0: serial=57095 error=0 07:13:38 Received message from Master: op=Filter serial=57096 07:13:38 Color wheel filter change from 0 to 0 07:13:38 FLIGetFilterPos err=0 currentPosition=0 07:13:38 FLIGetStepsRemaining err=0 RemainingSteps=0 07:13:38 Filter is already there-color wheel unchanged 07:13:38 Received message from Master: op=Shutter serial=57097 07:13:38 Shutter LASER close 07:13:38 Received message from Camera: op=State serial=57099 07:13:38 GetSingleValue result=40 Value=cccccccc 07:13:38 SkyScan query 07:13:39 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:13:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:39 Parameters OK 07:13:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:39 Set A/D data flow result=40 07:13:39 Set A/D channel type result=40 07:13:39 Set A/D encoding result=40 07:13:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:39 Set channel filter=0.000000e+000 result=40 07:13:39 Config A/D Result=40 07:13:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:39 Get A/D filter: -9.255963e+061 result=40 07:13:39 Get A/D value=-858993460 result=40 07:13:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:39 Parameters OK 07:13:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:39 Set A/D data flow result=40 07:13:39 Set A/D channel type result=40 07:13:39 Set A/D encoding result=40 07:13:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:39 Set channel filter=0.000000e+000 result=40 07:13:39 Config A/D Result=40 07:13:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:39 Get A/D filter: -9.255963e+061 result=40 07:13:39 Get A/D value=-858993460 result=40 07:13:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:39 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:13:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:13:39 Aux= 07:13:39 Message to Camera, serial 57099 queued 07:14:15 Received message from Master: op=PointingHead serial=57112 07:14:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:14:15 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:14:16 Point started: ret=0 07:14:16 point_skyscan result=0 07:14:17 Check angles 07:14:17 SkyScan query 07:14:17 SkyScan query done: ret=0 az=134.73<-8982 ze=36.435<-9571 Statuses=0009 0009 07:14:17 Msec=0 True Az=134.73 Ze=36.435 Az status=0009 Ze status=0009 07:14:17 Check angles 07:14:17 SkyScan query 07:14:18 SkyScan query done: ret=0 az=117.27<-7818 ze=15.51<-10966 Statuses=0009 0009 07:14:18 Msec=750 True Az=117.27 Ze=15.51 Az status=0009 Ze status=0009 07:14:18 Check angles 07:14:18 SkyScan query 07:14:19 SkyScan query done: ret=0 az=99.87<-6658 ze=-5.475<-12365 Statuses=0009 0009 07:14:19 Msec=1500 True Az=99.87 Ze=-5.475 Az status=0009 Ze status=0009 07:14:19 Check angles 07:14:19 SkyScan query 07:14:19 SkyScan query done: ret=0 az=82.395<-5493 ze=-26.415<-13761 Statuses=0009 0009 07:14:19 Msec=2250 True Az=82.395 Ze=-26.415 Az status=0009 Ze status=0009 07:14:20 Check angles 07:14:20 SkyScan query 07:14:20 SkyScan query done: ret=0 az=64.785<-4319 ze=-38.565<-14571 Statuses=0009 0008 07:14:20 Msec=3000 True Az=64.785 Ze=-38.565 Az status=0009 Ze status=0008 07:14:20 Check angles 07:14:20 SkyScan query 07:14:21 SkyScan query done: ret=0 az=47.355<-3157 ze=-38.535<-14569 Statuses=0009 0008 07:14:21 Msec=3750 True Az=47.355 Ze=-38.535 Az status=0009 Ze status=0008 07:14:21 Check angles 07:14:21 SkyScan query 07:14:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:14:22 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:14:22 Message to Master queued w/err=0: serial=57112 error=0 07:14:27 Received message from Master: op=Filter serial=57113 07:14:27 Color wheel filter change from 0 to 0 07:14:27 FLIGetFilterPos err=0 currentPosition=0 07:14:27 FLIGetStepsRemaining err=0 RemainingSteps=0 07:14:27 Filter is already there-color wheel unchanged 07:14:27 Received message from Master: op=Shutter serial=57114 07:14:27 Shutter LASER close 07:14:27 Received message from Camera: op=State serial=57116 07:14:27 GetSingleValue result=40 Value=cccccccc 07:14:27 SkyScan query 07:14:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:14:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:27 Parameters OK 07:14:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:27 Set A/D data flow result=40 07:14:27 Set A/D channel type result=40 07:14:27 Set A/D encoding result=40 07:14:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:27 Set channel filter=0.000000e+000 result=40 07:14:27 Config A/D Result=40 07:14:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:27 Get A/D filter: -9.255963e+061 result=40 07:14:27 Get A/D value=-858993460 result=40 07:14:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:27 Parameters OK 07:14:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:27 Set A/D data flow result=40 07:14:27 Set A/D channel type result=40 07:14:27 Set A/D encoding result=40 07:14:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:27 Set channel filter=0.000000e+000 result=40 07:14:27 Config A/D Result=40 07:14:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:27 Get A/D filter: -9.255963e+061 result=40 07:14:27 Get A/D value=-858993460 result=40 07:14:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:14:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:14:27 Aux= 07:14:27 Message to Camera, serial 57116 queued 07:15:04 Received message from Master: op=PointingHead serial=57129 07:15:04 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:15:04 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:15:05 Point started: ret=0 07:15:05 point_skyscan result=0 07:15:05 Check angles 07:15:05 SkyScan query 07:15:06 SkyScan query done: ret=0 az=64.14<-4276 ze=-68.295<-16553 Statuses=0009 0009 07:15:06 Msec=0 True Az=64.14 Ze=-68.295 Az status=0009 Ze status=0009 07:15:06 Check angles 07:15:06 SkyScan query 07:15:07 SkyScan query done: ret=0 az=81.435<-5429 ze=-89.31<-17954 Statuses=0009 0009 07:15:07 Msec=750 True Az=81.435 Ze=-89.31 Az status=0009 Ze status=0009 07:15:07 Check angles 07:15:07 SkyScan query 07:15:07 SkyScan query done: ret=0 az=99.54<-6636 ze=-110.7<-19380 Statuses=0009 0009 07:15:07 Msec=1500 True Az=99.54 Ze=-110.7 Az status=0009 Ze status=0009 07:15:08 Check angles 07:15:08 SkyScan query 07:15:08 SkyScan query done: ret=0 az=117.015<-7801 ze=-131.64<-20776 Statuses=0009 0009 07:15:08 Msec=2250 True Az=117.015 Ze=-131.64 Az status=0009 Ze status=0009 07:15:08 Check angles 07:15:08 SkyScan query 07:15:09 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 07:15:09 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 07:15:09 Check angles 07:15:09 SkyScan query 07:15:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:15:10 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:15:10 Message to Master queued w/err=0: serial=57129 error=0 07:15:15 Received message from Master: op=Filter serial=57130 07:15:15 Color wheel filter change from 0 to 0 07:15:15 FLIGetFilterPos err=0 currentPosition=0 07:15:15 FLIGetStepsRemaining err=0 RemainingSteps=0 07:15:15 Filter is already there-color wheel unchanged 07:15:15 Received message from Master: op=Shutter serial=57131 07:15:15 Shutter LASER close 07:15:15 Received message from Camera: op=State serial=57133 07:15:15 GetSingleValue result=40 Value=cccccccc 07:15:15 SkyScan query 07:15:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:15:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:15 Parameters OK 07:15:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:15 Set A/D data flow result=40 07:15:15 Set A/D channel type result=40 07:15:15 Set A/D encoding result=40 07:15:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:15 Set channel filter=0.000000e+000 result=40 07:15:15 Config A/D Result=40 07:15:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:15 Get A/D filter: -9.255963e+061 result=40 07:15:15 Get A/D value=-858993460 result=40 07:15:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:15 Parameters OK 07:15:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:15 Set A/D data flow result=40 07:15:15 Set A/D channel type result=40 07:15:15 Set A/D encoding result=40 07:15:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:15 Set channel filter=0.000000e+000 result=40 07:15:15 Config A/D Result=40 07:15:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:15 Get A/D filter: -9.255963e+061 result=40 07:15:15 Get A/D value=-858993460 result=40 07:15:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:15 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:15:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:15:15 Aux= 07:15:15 Message to Camera, serial 57133 queued 07:15:29 Received message from Master: op=Identify serial=57134 07:15:52 Received message from Master: op=PointingHead serial=57149 07:15:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:15:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:15:53 Point started: ret=0 07:15:53 point_skyscan result=0 07:15:53 Check angles 07:15:53 SkyScan query 07:15:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.895<-23393 Statuses=0009 0009 07:15:54 Msec=0 True Az=113.01 Ze=-170.895 Az status=0009 Ze status=0009 [UTC 2018-12-11 07:15:54] 07:15:54 Check angles 07:15:54 SkyScan query 07:15:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:15:55 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:15:55 Message to Master queued w/err=0: serial=57149 error=0 07:16:00 Received message from Master: op=Filter serial=57150 07:16:00 Color wheel filter change from 0 to 0 07:16:00 FLIGetFilterPos err=0 currentPosition=0 07:16:00 FLIGetStepsRemaining err=0 RemainingSteps=0 07:16:00 Filter is already there-color wheel unchanged 07:16:00 Received message from Master: op=Shutter serial=57151 07:16:00 Shutter LASER open 07:16:00 Received message from Camera: op=State serial=57153 07:16:00 GetSingleValue result=40 Value=cccccccc 07:16:00 SkyScan query 07:16:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:16:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:01 Parameters OK 07:16:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:01 Set A/D data flow result=40 07:16:01 Set A/D channel type result=40 07:16:01 Set A/D encoding result=40 07:16:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:01 Set channel filter=0.000000e+000 result=40 07:16:01 Config A/D Result=40 07:16:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:01 Get A/D filter: -9.255963e+061 result=40 07:16:01 Get A/D value=-858993460 result=40 07:16:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:01 Parameters OK 07:16:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:01 Set A/D data flow result=40 07:16:01 Set A/D channel type result=40 07:16:01 Set A/D encoding result=40 07:16:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:01 Set channel filter=0.000000e+000 result=40 07:16:01 Config A/D Result=40 07:16:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:01 Get A/D filter: -9.255963e+061 result=40 07:16:01 Get A/D value=-858993460 result=40 07:16:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:16:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:16:01 Aux= 07:16:01 Message to Camera, serial 57153 queued 07:16:09 Received message from Master: op=Shutter serial=57163 07:16:09 Shutter LASER close 07:16:10 Received message from Master: op=PointingHead serial=57167 07:16:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:16:10 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:16:10 Point started: ret=0 07:16:10 point_skyscan result=0 07:16:11 Check angles 07:16:11 SkyScan query 07:16:11 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.445<-21563 Statuses=0009 0009 07:16:11 Msec=0 True Az=135.765 Ze=-143.445 Az status=0009 Ze status=0009 07:16:12 Check angles 07:16:12 SkyScan query 07:16:12 SkyScan query done: ret=0 az=153.255<-10217 ze=-122.505<-20167 Statuses=0009 0009 07:16:12 Msec=750 True Az=153.255 Ze=-122.505 Az status=0009 Ze status=0009 07:16:12 Check angles 07:16:12 SkyScan query 07:16:13 SkyScan query done: ret=0 az=170.76<-11384 ze=-101.595<-18773 Statuses=0009 0009 07:16:13 Msec=1500 True Az=170.76 Ze=-101.595 Az status=0009 Ze status=0009 07:16:13 Check angles 07:16:13 SkyScan query 07:16:14 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.175<-17345 Statuses=0008 0009 07:16:14 Msec=2250 True Az=176.025 Ze=-80.175 Az status=0008 Ze status=0009 07:16:14 Check angles 07:16:14 SkyScan query 07:16:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.175<-15945 Statuses=0008 0009 07:16:14 Msec=3000 True Az=175.995 Ze=-59.175 Az status=0008 Ze status=0009 07:16:15 Check angles 07:16:15 SkyScan query 07:16:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 07:16:15 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 07:16:15 Message to Master queued w/err=0: serial=57167 error=0 07:16:20 Received message from Master: op=Filter serial=57168 07:16:20 Color wheel filter change from 0 to 0 07:16:20 FLIGetFilterPos err=0 currentPosition=0 07:16:20 FLIGetStepsRemaining err=0 RemainingSteps=0 07:16:20 Filter is already there-color wheel unchanged 07:16:20 Received message from Master: op=Shutter serial=57169 07:16:20 Shutter LASER close 07:16:21 Received message from Camera: op=State serial=57171 07:16:21 GetSingleValue result=40 Value=cccccccc 07:16:21 SkyScan query 07:16:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:16:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:21 Parameters OK 07:16:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:21 Set A/D data flow result=40 07:16:21 Set A/D channel type result=40 07:16:21 Set A/D encoding result=40 07:16:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:21 Set channel filter=0.000000e+000 result=40 07:16:21 Config A/D Result=40 07:16:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:21 Get A/D filter: -9.255963e+061 result=40 07:16:21 Get A/D value=-858993460 result=40 07:16:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:21 Parameters OK 07:16:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:21 Set A/D data flow result=40 07:16:21 Set A/D channel type result=40 07:16:21 Set A/D encoding result=40 07:16:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:21 Set channel filter=0.000000e+000 result=40 07:16:21 Config A/D Result=40 07:16:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:21 Get A/D filter: -9.255963e+061 result=40 07:16:21 Get A/D value=-858993460 result=40 07:16:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:16:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:16:21 Aux= 07:16:21 Message to Camera, serial 57171 queued 07:16:58 Received message from Master: op=PointingHead serial=57184 07:16:58 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:16:58 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:16:58 Point started: ret=0 07:16:58 point_skyscan result=0 07:16:59 Check angles 07:16:59 SkyScan query 07:17:00 SkyScan query done: ret=0 az=153.195<-10213 ze=-21.99<-13466 Statuses=0009 0009 07:17:00 Msec=0 True Az=153.195 Ze=-21.99 Az status=0009 Ze status=0009 07:17:00 Check angles 07:17:00 SkyScan query 07:17:00 SkyScan query done: ret=0 az=135.78<-9052 ze=-1.005<-12067 Statuses=0009 0009 07:17:00 Msec=750 True Az=135.78 Ze=-1.005 Az status=0009 Ze status=0009 07:17:01 Check angles 07:17:01 SkyScan query 07:17:01 SkyScan query done: ret=0 az=117.765<-7851 ze=20.37<-10642 Statuses=0009 0009 07:17:01 Msec=1500 True Az=117.765 Ze=20.37 Az status=0009 Ze status=0009 07:17:01 Check angles 07:17:01 SkyScan query 07:17:02 SkyScan query done: ret=0 az=100.29<-6686 ze=41.34<-9244 Statuses=0009 0009 07:17:02 Msec=2250 True Az=100.29 Ze=41.34 Az status=0009 Ze status=0009 07:17:02 Check angles 07:17:02 SkyScan query 07:17:03 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 07:17:03 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 07:17:03 Check angles 07:17:03 SkyScan query 07:17:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:17:03 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:17:03 Message to Master queued w/err=0: serial=57184 error=0 07:17:08 Received message from Master: op=Filter serial=57185 07:17:08 Color wheel filter change from 0 to 0 07:17:08 FLIGetFilterPos err=0 currentPosition=0 07:17:08 FLIGetStepsRemaining err=0 RemainingSteps=0 07:17:08 Filter is already there-color wheel unchanged 07:17:09 Received message from Master: op=Shutter serial=57186 07:17:09 Shutter LASER close 07:17:09 Received message from Camera: op=State serial=57188 07:17:09 GetSingleValue result=40 Value=cccccccc 07:17:09 SkyScan query 07:17:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:17:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:09 Parameters OK 07:17:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:09 Set A/D data flow result=40 07:17:09 Set A/D channel type result=40 07:17:09 Set A/D encoding result=40 07:17:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:09 Set channel filter=0.000000e+000 result=40 07:17:09 Config A/D Result=40 07:17:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:09 Get A/D filter: -9.255963e+061 result=40 07:17:09 Get A/D value=-858993460 result=40 07:17:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:09 Parameters OK 07:17:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:09 Set A/D data flow result=40 07:17:09 Set A/D channel type result=40 07:17:09 Set A/D encoding result=40 07:17:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:09 Set channel filter=0.000000e+000 result=40 07:17:09 Config A/D Result=40 07:17:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:09 Get A/D filter: -9.255963e+061 result=40 07:17:09 Get A/D value=-858993460 result=40 07:17:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:17:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:17:09 Aux= 07:17:09 Message to Camera, serial 57188 queued 07:17:46 Received message from Master: op=PointingHead serial=57201 07:17:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:17:46 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:17:46 Point started: ret=0 07:17:46 point_skyscan result=0 07:17:47 Check angles 07:17:47 SkyScan query 07:17:48 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 07:17:48 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 07:17:48 Check angles 07:17:48 SkyScan query 07:17:48 SkyScan query done: ret=0 az=126.375<-8425 ze=38.505<-9433 Statuses=0009 0008 07:17:48 Msec=750 True Az=126.375 Ze=38.505 Az status=0009 Ze status=0008 07:17:49 Check angles 07:17:49 SkyScan query 07:17:49 SkyScan query done: ret=0 az=143.85<-9590 ze=38.505<-9433 Statuses=0009 0008 07:17:49 Msec=1500 True Az=143.85 Ze=38.505 Az status=0009 Ze status=0008 07:17:49 Check angles 07:17:49 SkyScan query 07:17:50 SkyScan query done: ret=0 az=161.565<-10771 ze=38.505<-9433 Statuses=0009 0008 07:17:50 Msec=2250 True Az=161.565 Ze=38.505 Az status=0009 Ze status=0008 07:17:50 Check angles 07:17:50 SkyScan query 07:17:51 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 07:17:51 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 07:17:51 Check angles 07:17:51 SkyScan query 07:17:51 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:17:51 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:17:51 Message to Master queued w/err=0: serial=57201 error=0 07:17:56 Received message from Master: op=Filter serial=57202 07:17:56 Color wheel filter change from 0 to 0 07:17:56 FLIGetFilterPos err=0 currentPosition=0 07:17:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:17:56 Filter is already there-color wheel unchanged 07:17:57 Received message from Master: op=Shutter serial=57203 07:17:57 Shutter LASER close 07:17:57 Received message from Camera: op=State serial=57205 07:17:57 GetSingleValue result=40 Value=cccccccc 07:17:57 SkyScan query 07:17:57 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:17:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:57 Parameters OK 07:17:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:57 Set A/D data flow result=40 07:17:57 Set A/D channel type result=40 07:17:57 Set A/D encoding result=40 07:17:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:57 Set channel filter=0.000000e+000 result=40 07:17:57 Config A/D Result=40 07:17:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:57 Get A/D filter: -9.255963e+061 result=40 07:17:57 Get A/D value=-858993460 result=40 07:17:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:57 Parameters OK 07:17:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:57 Set A/D data flow result=40 07:17:57 Set A/D channel type result=40 07:17:57 Set A/D encoding result=40 07:17:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:57 Set channel filter=0.000000e+000 result=40 07:17:57 Config A/D Result=40 07:17:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:57 Get A/D filter: -9.255963e+061 result=40 07:17:57 Get A/D value=-858993460 result=40 07:17:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:17:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:17:57 Aux= 07:17:57 Message to Camera, serial 57205 queued 07:18:34 Received message from Master: op=PointingHead serial=57218 07:18:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:18:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:18:34 Point started: ret=0 07:18:34 point_skyscan result=0 07:18:35 Check angles 07:18:35 SkyScan query 07:18:36 SkyScan query done: ret=0 az=153.18<-10212 ze=8.925<-11405 Statuses=0009 0009 07:18:36 Msec=0 True Az=153.18 Ze=8.925 Az status=0009 Ze status=0009 07:18:36 Check angles 07:18:36 SkyScan query 07:18:37 SkyScan query done: ret=0 az=135.765<-9051 ze=-12.03<-12802 Statuses=0009 0009 07:18:37 Msec=750 True Az=135.765 Ze=-12.03 Az status=0009 Ze status=0009 07:18:37 Check angles 07:18:37 SkyScan query 07:18:37 SkyScan query done: ret=0 az=118.23<-7882 ze=-32.955<-14197 Statuses=0009 0009 07:18:37 Msec=1500 True Az=118.23 Ze=-32.955 Az status=0009 Ze status=0009 07:18:37 Check angles 07:18:37 SkyScan query 07:18:38 SkyScan query done: ret=0 az=100.62<-6708 ze=-51.495<-15433 Statuses=0009 0009 07:18:38 Msec=2250 True Az=100.62 Ze=-51.495 Az status=0009 Ze status=0009 07:18:38 Check angles 07:18:38 SkyScan query 07:18:39 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 07:18:39 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 07:18:39 Check angles 07:18:39 SkyScan query 07:18:40 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.495<-15433 Statuses=0008 0008 07:18:40 Msec=3750 True Az=86.01 Ze=-51.495 Az status=0008 Ze status=0008 07:18:40 Message to Master queued w/err=0: serial=57218 error=0 07:18:45 Received message from Master: op=Filter serial=57219 07:18:45 Color wheel filter change from 0 to 0 07:18:45 FLIGetFilterPos err=0 currentPosition=0 07:18:45 FLIGetStepsRemaining err=0 RemainingSteps=0 07:18:45 Filter is already there-color wheel unchanged 07:18:45 Received message from Master: op=Shutter serial=57220 07:18:45 Shutter LASER close 07:18:45 Received message from Camera: op=State serial=57222 07:18:45 GetSingleValue result=40 Value=cccccccc 07:18:45 SkyScan query 07:18:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:18:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:45 Parameters OK 07:18:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:45 Set A/D data flow result=40 07:18:45 Set A/D channel type result=40 07:18:45 Set A/D encoding result=40 07:18:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:45 Set channel filter=0.000000e+000 result=40 07:18:45 Config A/D Result=40 07:18:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:45 Get A/D filter: -9.255963e+061 result=40 07:18:45 Get A/D value=-858993460 result=40 07:18:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:45 Parameters OK 07:18:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:45 Set A/D data flow result=40 07:18:45 Set A/D channel type result=40 07:18:45 Set A/D encoding result=40 07:18:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:45 Set channel filter=0.000000e+000 result=40 07:18:45 Config A/D Result=40 07:18:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:45 Get A/D filter: -9.255963e+061 result=40 07:18:45 Get A/D value=-858993460 result=40 07:18:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:18:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:18:45 Aux= 07:18:45 Message to Camera, serial 57222 queued 07:19:22 Received message from Master: op=PointingHead serial=57235 07:19:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:19:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:19:22 Point started: ret=0 07:19:22 point_skyscan result=0 07:19:23 Check angles 07:19:23 SkyScan query 07:19:24 SkyScan query done: ret=0 az=109.215<-7281 ze=-81.45<-17430 Statuses=0009 0009 07:19:24 Msec=0 True Az=109.215 Ze=-81.45 Az status=0009 Ze status=0009 07:19:24 Check angles 07:19:24 SkyScan query 07:19:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.87<-18858 Statuses=0008 0009 07:19:25 Msec=750 True Az=112.995 Ze=-102.87 Az status=0008 Ze status=0009 07:19:25 Check angles 07:19:25 SkyScan query 07:19:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.795<-20253 Statuses=0008 0009 07:19:25 Msec=1500 True Az=112.995 Ze=-123.795 Az status=0008 Ze status=0009 07:19:26 Check angles 07:19:26 SkyScan query 07:19:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.75<-21650 Statuses=0008 0009 07:19:26 Msec=2250 True Az=112.995 Ze=-144.75 Az status=0008 Ze status=0009 07:19:26 Check angles 07:19:26 SkyScan query 07:19:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.11<-23074 Statuses=0008 0009 07:19:27 Msec=3000 True Az=112.995 Ze=-166.11 Az status=0008 Ze status=0009 07:19:27 Check angles 07:19:27 SkyScan query 07:19:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:19:28 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:19:28 Message to Master queued w/err=0: serial=57235 error=0 07:19:33 Received message from Master: op=Filter serial=57236 07:19:33 Color wheel filter change from 0 to 0 07:19:33 FLIGetFilterPos err=0 currentPosition=0 07:19:33 FLIGetStepsRemaining err=0 RemainingSteps=0 07:19:33 Filter is already there-color wheel unchanged 07:19:33 Received message from Master: op=Shutter serial=57237 07:19:33 Shutter LASER open 07:19:33 Received message from Camera: op=State serial=57239 07:19:33 GetSingleValue result=40 Value=cccccccc 07:19:33 SkyScan query 07:19:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:19:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:34 Parameters OK 07:19:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:34 Set A/D data flow result=40 07:19:34 Set A/D channel type result=40 07:19:34 Set A/D encoding result=40 07:19:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:34 Set channel filter=0.000000e+000 result=40 07:19:34 Config A/D Result=40 07:19:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:34 Get A/D filter: -9.255963e+061 result=40 07:19:34 Get A/D value=-858993460 result=40 07:19:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:34 Parameters OK 07:19:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:34 Set A/D data flow result=40 07:19:34 Set A/D channel type result=40 07:19:34 Set A/D encoding result=40 07:19:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:34 Set channel filter=0.000000e+000 result=40 07:19:34 Config A/D Result=40 07:19:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:34 Get A/D filter: -9.255963e+061 result=40 07:19:34 Get A/D value=-858993460 result=40 07:19:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:19:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:19:34 Aux= 07:19:34 Message to Camera, serial 57239 queued 07:19:42 Received message from Master: op=Shutter serial=57249 07:19:42 Shutter LASER close 07:19:42 Received message from Master: op=PointingHead serial=57253 07:19:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:19:42 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:19:43 Point started: ret=0 07:19:43 point_skyscan result=0 07:19:43 Check angles 07:19:43 SkyScan query 07:19:44 SkyScan query done: ret=0 az=89.85<-5990 ze=157.155<-1523 Statuses=0009 0009 07:19:44 Msec=0 True Az=89.85 Ze=157.155 Az status=0009 Ze status=0009 07:19:44 Check angles 07:19:44 SkyScan query 07:19:45 SkyScan query done: ret=0 az=72.315<-4821 ze=136.185<-2921 Statuses=0009 0009 07:19:45 Msec=750 True Az=72.315 Ze=136.185 Az status=0009 Ze status=0009 07:19:45 Check angles 07:19:45 SkyScan query 07:19:46 SkyScan query done: ret=0 az=54.705<-3647 ze=114.78<-4348 Statuses=0009 0009 07:19:46 Msec=1500 True Az=54.705 Ze=114.78 Az status=0009 Ze status=0009 07:19:46 Check angles 07:19:46 SkyScan query 07:19:46 SkyScan query done: ret=0 az=40.905<-2727 ze=93.825<-5745 Statuses=0009 0009 07:19:46 Msec=2250 True Az=40.905 Ze=93.825 Az status=0009 Ze status=0009 07:19:47 Check angles 07:19:47 SkyScan query 07:19:47 SkyScan query done: ret=0 az=40.995<-2733 ze=72.87<-7142 Statuses=0008 0009 07:19:47 Msec=3000 True Az=40.995 Ze=72.87 Az status=0008 Ze status=0009 07:19:47 Check angles 07:19:47 SkyScan query 07:19:48 SkyScan query done: ret=0 az=40.995<-2733 ze=52.515<-8499 Statuses=0008 0009 07:19:48 Msec=3750 True Az=40.995 Ze=52.515 Az status=0008 Ze status=0009 07:19:48 Check angles 07:19:48 SkyScan query 07:19:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:19:49 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:19:49 Message to Master queued w/err=0: serial=57253 error=0 07:19:54 Received message from Master: op=Filter serial=57254 07:19:54 Color wheel filter change from 0 to 0 07:19:54 FLIGetFilterPos err=0 currentPosition=0 07:19:54 FLIGetStepsRemaining err=0 RemainingSteps=0 07:19:54 Filter is already there-color wheel unchanged 07:19:54 Received message from Master: op=Shutter serial=57255 07:19:54 Shutter LASER close 07:19:54 Received message from Camera: op=State serial=57257 07:19:54 GetSingleValue result=40 Value=cccccccc 07:19:54 SkyScan query 07:19:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:19:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:55 Parameters OK 07:19:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:55 Set A/D data flow result=40 07:19:55 Set A/D channel type result=40 07:19:55 Set A/D encoding result=40 07:19:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:55 Set channel filter=0.000000e+000 result=40 07:19:55 Config A/D Result=40 07:19:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:55 Get A/D filter: -9.255963e+061 result=40 07:19:55 Get A/D value=-858993460 result=40 07:19:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:55 Parameters OK 07:19:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:55 Set A/D data flow result=40 07:19:55 Set A/D channel type result=40 07:19:55 Set A/D encoding result=40 07:19:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:55 Set channel filter=0.000000e+000 result=40 07:19:55 Config A/D Result=40 07:19:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:55 Get A/D filter: -9.255963e+061 result=40 07:19:55 Get A/D value=-858993460 result=40 07:19:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:19:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:19:55 Aux= 07:19:55 Message to Camera, serial 57257 queued 07:20:31 Received message from Master: op=PointingHead serial=57270 07:20:31 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:20:31 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:20:32 Point started: ret=0 07:20:32 point_skyscan result=0 07:20:33 Check angles 07:20:33 SkyScan query 07:20:33 SkyScan query done: ret=0 az=64.095<-4273 ze=66.555<-7563 Statuses=0009 0008 07:20:33 Msec=0 True Az=64.095 Ze=66.555 Az status=0009 Ze status=0008 07:20:33 Check angles 07:20:33 SkyScan query 07:20:34 SkyScan query done: ret=0 az=81.375<-5425 ze=66.495<-7567 Statuses=0009 0008 07:20:34 Msec=750 True Az=81.375 Ze=66.495 Az status=0009 Ze status=0008 07:20:34 Check angles 07:20:34 SkyScan query 07:20:35 SkyScan query done: ret=0 az=98.895<-6593 ze=66.495<-7567 Statuses=0009 0008 07:20:35 Msec=1500 True Az=98.895 Ze=66.495 Az status=0009 Ze status=0008 07:20:35 Check angles 07:20:35 SkyScan query 07:20:35 SkyScan query done: ret=0 az=116.52<-7768 ze=66.495<-7567 Statuses=0009 0008 07:20:35 Msec=2250 True Az=116.52 Ze=66.495 Az status=0009 Ze status=0008 07:20:36 Check angles 07:20:36 SkyScan query 07:20:36 SkyScan query done: ret=0 az=134.055<-8937 ze=66.495<-7567 Statuses=0009 0008 07:20:36 Msec=3000 True Az=134.055 Ze=66.495 Az status=0009 Ze status=0008 07:20:36 Check angles 07:20:36 SkyScan query 07:20:37 SkyScan query done: ret=0 az=151.815<-10121 ze=66.495<-7567 Statuses=0009 0008 07:20:37 Msec=3750 True Az=151.815 Ze=66.495 Az status=0009 Ze status=0008 07:20:37 Check angles 07:20:37 SkyScan query 07:20:38 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 07:20:38 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 07:20:38 Message to Master queued w/err=0: serial=57270 error=0 07:20:43 Received message from Master: op=Filter serial=57271 07:20:43 Color wheel filter change from 0 to 0 07:20:43 FLIGetFilterPos err=0 currentPosition=0 07:20:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:20:43 Filter is already there-color wheel unchanged 07:20:43 Received message from Master: op=Shutter serial=57272 07:20:43 Shutter LASER close 07:20:43 Received message from Camera: op=State serial=57274 07:20:43 GetSingleValue result=40 Value=cccccccc 07:20:43 SkyScan query 07:20:43 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:20:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:43 Parameters OK 07:20:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:43 Set A/D data flow result=40 07:20:43 Set A/D channel type result=40 07:20:43 Set A/D encoding result=40 07:20:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:43 Set channel filter=0.000000e+000 result=40 07:20:43 Config A/D Result=40 07:20:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:43 Get A/D filter: -9.255963e+061 result=40 07:20:43 Get A/D value=-858993460 result=40 07:20:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:43 Parameters OK 07:20:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:43 Set A/D data flow result=40 07:20:43 Set A/D channel type result=40 07:20:43 Set A/D encoding result=40 07:20:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:43 Set channel filter=0.000000e+000 result=40 07:20:43 Config A/D Result=40 07:20:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:43 Get A/D filter: -9.255963e+061 result=40 07:20:43 Get A/D value=-858993460 result=40 07:20:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:43 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:20:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:20:43 Aux= 07:20:43 Message to Camera, serial 57274 queued 07:21:20 Received message from Master: op=PointingHead serial=57287 07:21:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:21:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:21:21 Point started: ret=0 07:21:21 point_skyscan result=0 07:21:21 Check angles 07:21:21 SkyScan query 07:21:22 SkyScan query done: ret=0 az=134.715<-8981 ze=36.645<-9557 Statuses=0009 0009 07:21:22 Msec=0 True Az=134.715 Ze=36.645 Az status=0009 Ze status=0009 07:21:22 Check angles 07:21:22 SkyScan query 07:21:23 SkyScan query done: ret=0 az=117.225<-7815 ze=15.735<-10951 Statuses=0009 0009 07:21:23 Msec=750 True Az=117.225 Ze=15.735 Az status=0009 Ze status=0009 07:21:23 Check angles 07:21:23 SkyScan query 07:21:23 SkyScan query done: ret=0 az=99.825<-6655 ze=-5.265<-12351 Statuses=0009 0009 07:21:23 Msec=1500 True Az=99.825 Ze=-5.265 Az status=0009 Ze status=0009 07:21:24 Check angles 07:21:24 SkyScan query 07:21:24 SkyScan query done: ret=0 az=82.005<-5467 ze=-26.64<-13776 Statuses=0009 0009 07:21:24 Msec=2250 True Az=82.005 Ze=-26.64 Az status=0009 Ze status=0009 07:21:24 Check angles 07:21:24 SkyScan query 07:21:25 SkyScan query done: ret=0 az=64.545<-4303 ze=-38.565<-14571 Statuses=0009 0008 07:21:25 Msec=3000 True Az=64.545 Ze=-38.565 Az status=0009 Ze status=0008 07:21:25 Check angles 07:21:25 SkyScan query 07:21:26 SkyScan query done: ret=0 az=47.1<-3140 ze=-38.535<-14569 Statuses=0009 0008 07:21:26 Msec=3750 True Az=47.1 Ze=-38.535 Az status=0009 Ze status=0008 07:21:26 Check angles 07:21:26 SkyScan query 07:21:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:21:26 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:21:26 Message to Master queued w/err=0: serial=57287 error=0 07:21:31 Received message from Master: op=Filter serial=57288 07:21:31 Color wheel filter change from 0 to 0 07:21:31 FLIGetFilterPos err=0 currentPosition=0 07:21:31 FLIGetStepsRemaining err=0 RemainingSteps=0 07:21:31 Filter is already there-color wheel unchanged 07:21:32 Received message from Master: op=Shutter serial=57289 07:21:32 Shutter LASER close 07:21:32 Received message from Camera: op=State serial=57291 07:21:32 GetSingleValue result=40 Value=cccccccc 07:21:32 SkyScan query 07:21:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:21:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:32 Parameters OK 07:21:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:32 Set A/D data flow result=40 07:21:32 Set A/D channel type result=40 07:21:32 Set A/D encoding result=40 07:21:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:32 Set channel filter=0.000000e+000 result=40 07:21:32 Config A/D Result=40 07:21:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:32 Get A/D filter: -9.255963e+061 result=40 07:21:32 Get A/D value=-858993460 result=40 07:21:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:32 Parameters OK 07:21:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:32 Set A/D data flow result=40 07:21:32 Set A/D channel type result=40 07:21:32 Set A/D encoding result=40 07:21:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:32 Set channel filter=0.000000e+000 result=40 07:21:32 Config A/D Result=40 07:21:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:32 Get A/D filter: -9.255963e+061 result=40 07:21:32 Get A/D value=-858993460 result=40 07:21:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:21:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:21:32 Aux= 07:21:32 Message to Camera, serial 57291 queued 07:22:09 Received message from Master: op=PointingHead serial=57304 07:22:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:22:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:22:09 Point started: ret=0 07:22:09 point_skyscan result=0 07:22:10 Check angles 07:22:10 SkyScan query 07:22:11 SkyScan query done: ret=0 az=64.08<-4272 ze=-68.37<-16558 Statuses=0009 0009 07:22:11 Msec=0 True Az=64.08 Ze=-68.37 Az status=0009 Ze status=0009 07:22:11 Check angles 07:22:11 SkyScan query 07:22:11 SkyScan query done: ret=0 az=81.495<-5433 ze=-89.385<-17959 Statuses=0009 0009 07:22:11 Msec=750 True Az=81.495 Ze=-89.385 Az status=0009 Ze status=0009 07:22:12 Check angles 07:22:12 SkyScan query 07:22:12 SkyScan query done: ret=0 az=99.465<-6631 ze=-110.745<-19383 Statuses=0009 0009 07:22:12 Msec=1500 True Az=99.465 Ze=-110.745 Az status=0009 Ze status=0009 07:22:12 Check angles 07:22:12 SkyScan query 07:22:13 SkyScan query done: ret=0 az=117.345<-7823 ze=-132.09<-20806 Statuses=0009 0009 07:22:13 Msec=2250 True Az=117.345 Ze=-132.09 Az status=0009 Ze status=0009 07:22:13 Check angles 07:22:13 SkyScan query 07:22:14 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 07:22:14 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 07:22:14 Check angles 07:22:14 SkyScan query 07:22:15 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:22:15 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:22:15 Message to Master queued w/err=0: serial=57304 error=0 07:22:20 Received message from Master: op=Filter serial=57305 07:22:20 Color wheel filter change from 0 to 0 07:22:20 FLIGetFilterPos err=0 currentPosition=0 07:22:20 FLIGetStepsRemaining err=0 RemainingSteps=0 07:22:20 Filter is already there-color wheel unchanged 07:22:20 Received message from Master: op=Shutter serial=57306 07:22:20 Shutter LASER close 07:22:20 Received message from Camera: op=State serial=57308 07:22:20 GetSingleValue result=40 Value=cccccccc 07:22:20 SkyScan query 07:22:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:22:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:20 Parameters OK 07:22:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:20 Set A/D data flow result=40 07:22:20 Set A/D channel type result=40 07:22:20 Set A/D encoding result=40 07:22:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:20 Set channel filter=0.000000e+000 result=40 07:22:20 Config A/D Result=40 07:22:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:20 Get A/D filter: -9.255963e+061 result=40 07:22:20 Get A/D value=-858993460 result=40 07:22:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:20 Parameters OK 07:22:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:20 Set A/D data flow result=40 07:22:20 Set A/D channel type result=40 07:22:20 Set A/D encoding result=40 07:22:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:20 Set channel filter=0.000000e+000 result=40 07:22:20 Config A/D Result=40 07:22:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:20 Get A/D filter: -9.255963e+061 result=40 07:22:20 Get A/D value=-858993460 result=40 07:22:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:22:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:22:20 Aux= 07:22:20 Message to Camera, serial 57308 queued 07:22:57 Received message from Master: op=PointingHead serial=57321 07:22:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:22:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:22:57 Point started: ret=0 07:22:57 point_skyscan result=0 07:22:58 Check angles 07:22:58 SkyScan query 07:22:59 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 07:22:59 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 07:22:59 Check angles 07:22:59 SkyScan query 07:23:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:23:00 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:23:00 Message to Master queued w/err=0: serial=57321 error=0 07:23:05 Received message from Master: op=Filter serial=57322 07:23:05 Color wheel filter change from 0 to 0 07:23:05 FLIGetFilterPos err=0 currentPosition=0 07:23:05 FLIGetStepsRemaining err=0 RemainingSteps=0 07:23:05 Filter is already there-color wheel unchanged 07:23:05 Received message from Master: op=Shutter serial=57323 07:23:05 Shutter LASER open 07:23:05 Received message from Camera: op=State serial=57325 07:23:05 GetSingleValue result=40 Value=cccccccc 07:23:05 SkyScan query 07:23:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:23:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:05 Parameters OK 07:23:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:05 Set A/D data flow result=40 07:23:05 Set A/D channel type result=40 07:23:05 Set A/D encoding result=40 07:23:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:05 Set channel filter=0.000000e+000 result=40 07:23:05 Config A/D Result=40 07:23:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:05 Get A/D filter: -9.255963e+061 result=40 07:23:05 Get A/D value=-858993460 result=40 07:23:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:05 Parameters OK 07:23:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:05 Set A/D data flow result=40 07:23:05 Set A/D channel type result=40 07:23:05 Set A/D encoding result=40 07:23:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:05 Set channel filter=0.000000e+000 result=40 07:23:05 Config A/D Result=40 07:23:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:05 Get A/D filter: -9.255963e+061 result=40 07:23:05 Get A/D value=-858993460 result=40 07:23:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:23:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:23:05 Aux= 07:23:05 Message to Camera, serial 57325 queued 07:23:14 Received message from Master: op=Shutter serial=57335 07:23:14 Shutter LASER close 07:23:15 Received message from Master: op=PointingHead serial=57339 07:23:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:23:15 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:23:15 Point started: ret=0 07:23:15 point_skyscan result=0 07:23:16 Check angles 07:23:16 SkyScan query 07:23:16 SkyScan query done: ret=0 az=136.17<-9078 ze=-142.995<-21533 Statuses=0009 0009 07:23:16 Msec=0 True Az=136.17 Ze=-142.995 Az status=0009 Ze status=0009 07:23:16 Check angles 07:23:16 SkyScan query 07:23:17 SkyScan query done: ret=0 az=153.705<-10247 ze=-122.025<-20135 Statuses=0009 0009 07:23:17 Msec=750 True Az=153.705 Ze=-122.025 Az status=0009 Ze status=0009 07:23:17 Check angles 07:23:17 SkyScan query 07:23:18 SkyScan query done: ret=0 az=171.495<-11433 ze=-100.59<-18706 Statuses=0009 0009 07:23:18 Msec=1500 True Az=171.495 Ze=-100.59 Az status=0009 Ze status=0009 07:23:18 Check angles 07:23:18 SkyScan query 07:23:18 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.695<-17313 Statuses=0008 0009 07:23:18 Msec=2250 True Az=176.025 Ze=-79.695 Az status=0008 Ze status=0009 07:23:19 Check angles 07:23:19 SkyScan query 07:23:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.695<-15913 Statuses=0008 0009 07:23:19 Msec=3000 True Az=175.995 Ze=-58.695 Az status=0008 Ze status=0009 07:23:19 Check angles 07:23:19 SkyScan query 07:23:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 07:23:20 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 07:23:20 Message to Master queued w/err=0: serial=57339 error=0 07:23:25 Received message from Master: op=Filter serial=57340 07:23:25 Color wheel filter change from 0 to 0 07:23:25 FLIGetFilterPos err=0 currentPosition=0 07:23:25 FLIGetStepsRemaining err=0 RemainingSteps=0 07:23:25 Filter is already there-color wheel unchanged 07:23:25 Received message from Master: op=Shutter serial=57341 07:23:25 Shutter LASER close 07:23:25 Received message from Camera: op=State serial=57343 07:23:25 GetSingleValue result=40 Value=cccccccc 07:23:25 SkyScan query 07:23:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:23:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:26 Parameters OK 07:23:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:26 Set A/D data flow result=40 07:23:26 Set A/D channel type result=40 07:23:26 Set A/D encoding result=40 07:23:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:26 Set channel filter=0.000000e+000 result=40 07:23:26 Config A/D Result=40 07:23:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:26 Get A/D filter: -9.255963e+061 result=40 07:23:26 Get A/D value=-858993460 result=40 07:23:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:26 Parameters OK 07:23:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:26 Set A/D data flow result=40 07:23:26 Set A/D channel type result=40 07:23:26 Set A/D encoding result=40 07:23:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:26 Set channel filter=0.000000e+000 result=40 07:23:26 Config A/D Result=40 07:23:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:26 Get A/D filter: -9.255963e+061 result=40 07:23:26 Get A/D value=-858993460 result=40 07:23:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:23:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:23:26 Aux= 07:23:26 Message to Camera, serial 57343 queued 07:24:03 Received message from Master: op=PointingHead serial=57356 07:24:03 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:24:03 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:24:03 Point started: ret=0 07:24:03 point_skyscan result=0 07:24:04 Check angles 07:24:04 SkyScan query 07:24:04 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.93<-13462 Statuses=0009 0009 07:24:04 Msec=0 True Az=153.12 Ze=-21.93 Az status=0009 Ze status=0009 07:24:05 Check angles 07:24:05 SkyScan query 07:24:05 SkyScan query done: ret=0 az=135.735<-9049 ze=-0.945<-12063 Statuses=0009 0009 07:24:05 Msec=750 True Az=135.735 Ze=-0.945 Az status=0009 Ze status=0009 07:24:05 Check angles 07:24:05 SkyScan query 07:24:06 SkyScan query done: ret=0 az=118.08<-7872 ze=19.995<-10667 Statuses=0009 0009 07:24:06 Msec=1500 True Az=118.08 Ze=19.995 Az status=0009 Ze status=0009 07:24:06 Check angles 07:24:06 SkyScan query 07:24:07 SkyScan query done: ret=0 az=100.59<-6706 ze=40.995<-9267 Statuses=0009 0009 07:24:07 Msec=2250 True Az=100.59 Ze=40.995 Az status=0009 Ze status=0009 07:24:07 Check angles 07:24:07 SkyScan query 07:24:07 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 07:24:07 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 07:24:08 Check angles 07:24:08 SkyScan query 07:24:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:24:08 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:24:08 Message to Master queued w/err=0: serial=57356 error=0 07:24:13 Received message from Master: op=Filter serial=57357 07:24:13 Color wheel filter change from 0 to 0 07:24:13 FLIGetFilterPos err=0 currentPosition=0 07:24:13 FLIGetStepsRemaining err=0 RemainingSteps=0 07:24:13 Filter is already there-color wheel unchanged 07:24:13 Received message from Master: op=Shutter serial=57358 07:24:13 Shutter LASER close 07:24:13 Received message from Camera: op=State serial=57360 07:24:13 GetSingleValue result=40 Value=cccccccc 07:24:13 SkyScan query 07:24:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:24:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:14 Parameters OK 07:24:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:14 Set A/D data flow result=40 07:24:14 Set A/D channel type result=40 07:24:14 Set A/D encoding result=40 07:24:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:14 Set channel filter=0.000000e+000 result=40 07:24:14 Config A/D Result=40 07:24:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:14 Get A/D filter: -9.255963e+061 result=40 07:24:14 Get A/D value=-858993460 result=40 07:24:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:14 Parameters OK 07:24:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:14 Set A/D data flow result=40 07:24:14 Set A/D channel type result=40 07:24:14 Set A/D encoding result=40 07:24:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:14 Set channel filter=0.000000e+000 result=40 07:24:14 Config A/D Result=40 07:24:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:14 Get A/D filter: -9.255963e+061 result=40 07:24:14 Get A/D value=-858993460 result=40 07:24:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:24:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:24:14 Aux= 07:24:14 Message to Camera, serial 57360 queued 07:24:51 Received message from Master: op=PointingHead serial=57373 07:24:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:24:51 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:24:51 Point started: ret=0 07:24:51 point_skyscan result=0 07:24:52 Check angles 07:24:52 SkyScan query 07:24:53 SkyScan query done: ret=0 az=108.75<-7250 ze=38.49<-9434 Statuses=0009 0008 07:24:53 Msec=0 True Az=108.75 Ze=38.49 Az status=0009 Ze status=0008 07:24:53 Check angles 07:24:53 SkyScan query 07:24:53 SkyScan query done: ret=0 az=126.375<-8425 ze=38.505<-9433 Statuses=0009 0008 07:24:53 Msec=750 True Az=126.375 Ze=38.505 Az status=0009 Ze status=0008 07:24:53 Check angles 07:24:53 SkyScan query 07:24:54 SkyScan query done: ret=0 az=143.82<-9588 ze=38.505<-9433 Statuses=0009 0008 07:24:54 Msec=1500 True Az=143.82 Ze=38.505 Az status=0009 Ze status=0008 07:24:54 Check angles 07:24:54 SkyScan query 07:24:55 SkyScan query done: ret=0 az=161.52<-10768 ze=38.505<-9433 Statuses=0009 0008 07:24:55 Msec=2250 True Az=161.52 Ze=38.505 Az status=0009 Ze status=0008 07:24:55 Check angles 07:24:55 SkyScan query 07:24:56 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 07:24:56 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 07:24:56 Check angles 07:24:56 SkyScan query 07:24:56 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:24:56 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:24:56 Message to Master queued w/err=0: serial=57373 error=0 07:25:01 Received message from Master: op=Filter serial=57374 07:25:01 Color wheel filter change from 0 to 0 07:25:01 FLIGetFilterPos err=0 currentPosition=0 07:25:01 FLIGetStepsRemaining err=0 RemainingSteps=0 07:25:01 Filter is already there-color wheel unchanged 07:25:01 Received message from Master: op=Shutter serial=57375 07:25:01 Shutter LASER close 07:25:02 Received message from Camera: op=State serial=57377 07:25:02 GetSingleValue result=40 Value=cccccccc 07:25:02 SkyScan query 07:25:02 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:25:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:02 Parameters OK 07:25:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:02 Set A/D data flow result=40 07:25:02 Set A/D channel type result=40 07:25:02 Set A/D encoding result=40 07:25:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:02 Set channel filter=0.000000e+000 result=40 07:25:02 Config A/D Result=40 07:25:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:02 Get A/D filter: -9.255963e+061 result=40 07:25:02 Get A/D value=-858993460 result=40 07:25:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:02 Parameters OK 07:25:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:02 Set A/D data flow result=40 07:25:02 Set A/D channel type result=40 07:25:02 Set A/D encoding result=40 07:25:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:02 Set channel filter=0.000000e+000 result=40 07:25:02 Config A/D Result=40 07:25:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:02 Get A/D filter: -9.255963e+061 result=40 07:25:02 Get A/D value=-858993460 result=40 07:25:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:25:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:25:02 Aux= 07:25:02 Message to Camera, serial 57377 queued 07:25:39 Received message from Master: op=PointingHead serial=57390 07:25:39 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:25:39 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:25:39 Point started: ret=0 07:25:39 point_skyscan result=0 07:25:40 Check angles 07:25:40 SkyScan query 07:25:41 SkyScan query done: ret=0 az=152.685<-10179 ze=8.145<-11457 Statuses=0009 0009 07:25:41 Msec=0 True Az=152.685 Ze=8.145 Az status=0009 Ze status=0009 07:25:41 Check angles 07:25:41 SkyScan query 07:25:41 SkyScan query done: ret=0 az=135.21<-9014 ze=-12.675<-12845 Statuses=0009 0009 07:25:41 Msec=750 True Az=135.21 Ze=-12.675 Az status=0009 Ze status=0009 07:25:42 Check angles 07:25:42 SkyScan query 07:25:42 SkyScan query done: ret=0 az=117.555<-7837 ze=-33.6<-14240 Statuses=0009 0009 07:25:42 Msec=1500 True Az=117.555 Ze=-33.6 Az status=0009 Ze status=0009 07:25:42 Check angles 07:25:42 SkyScan query 07:25:43 SkyScan query done: ret=0 az=99.765<-6651 ze=-51.57<-15438 Statuses=0009 0009 07:25:43 Msec=2250 True Az=99.765 Ze=-51.57 Az status=0009 Ze status=0009 07:25:43 Check angles 07:25:43 SkyScan query 07:25:44 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 07:25:44 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 07:25:44 Check angles 07:25:44 SkyScan query 07:25:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 [UTC 2018-12-11 07:25:44] 07:25:44 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:25:44 Message to Master queued w/err=0: serial=57390 error=0 07:25:49 Received message from Master: op=Filter serial=57391 07:25:49 Color wheel filter change from 0 to 0 07:25:49 FLIGetFilterPos err=0 currentPosition=0 07:25:49 FLIGetStepsRemaining err=0 RemainingSteps=0 07:25:49 Filter is already there-color wheel unchanged 07:25:50 Received message from Master: op=Shutter serial=57392 07:25:50 Shutter LASER close 07:25:50 Received message from Camera: op=State serial=57394 07:25:50 GetSingleValue result=40 Value=cccccccc 07:25:50 SkyScan query 07:25:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:25:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:50 Parameters OK 07:25:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:50 Set A/D data flow result=40 07:25:50 Set A/D channel type result=40 07:25:50 Set A/D encoding result=40 07:25:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:50 Set channel filter=0.000000e+000 result=40 07:25:50 Config A/D Result=40 07:25:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:50 Get A/D filter: -9.255963e+061 result=40 07:25:50 Get A/D value=-858993460 result=40 07:25:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:50 Parameters OK 07:25:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:50 Set A/D data flow result=40 07:25:50 Set A/D channel type result=40 07:25:50 Set A/D encoding result=40 07:25:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:50 Set channel filter=0.000000e+000 result=40 07:25:50 Config A/D Result=40 07:25:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:50 Get A/D filter: -9.255963e+061 result=40 07:25:50 Get A/D value=-858993460 result=40 07:25:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:25:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:25:50 Aux= 07:25:50 Message to Camera, serial 57394 queued 07:26:27 Received message from Master: op=PointingHead serial=57407 07:26:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:26:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:26:27 Point started: ret=0 07:26:27 point_skyscan result=0 07:26:28 Check angles 07:26:28 SkyScan query 07:26:29 SkyScan query done: ret=0 az=108.885<-7259 ze=-81.12<-17408 Statuses=0009 0009 07:26:29 Msec=0 True Az=108.885 Ze=-81.12 Az status=0009 Ze status=0009 07:26:29 Check angles 07:26:29 SkyScan query 07:26:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.075<-18805 Statuses=0008 0009 07:26:30 Msec=750 True Az=112.995 Ze=-102.075 Az status=0008 Ze status=0009 07:26:30 Check angles 07:26:30 SkyScan query 07:26:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.015<-20201 Statuses=0008 0009 07:26:30 Msec=1500 True Az=112.995 Ze=-123.015 Az status=0008 Ze status=0009 07:26:30 Check angles 07:26:30 SkyScan query 07:26:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.985<-21599 Statuses=0008 0009 07:26:31 Msec=2250 True Az=112.995 Ze=-143.985 Az status=0008 Ze status=0009 07:26:31 Check angles 07:26:31 SkyScan query 07:26:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.375<-23025 Statuses=0008 0009 07:26:32 Msec=3000 True Az=112.995 Ze=-165.375 Az status=0008 Ze status=0009 07:26:32 Check angles 07:26:32 SkyScan query 07:26:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:26:33 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:26:33 Message to Master queued w/err=0: serial=57407 error=0 07:26:38 Received message from Master: op=Filter serial=57408 07:26:38 Color wheel filter change from 0 to 0 07:26:38 FLIGetFilterPos err=0 currentPosition=0 07:26:38 FLIGetStepsRemaining err=0 RemainingSteps=0 07:26:38 Filter is already there-color wheel unchanged 07:26:38 Received message from Master: op=Shutter serial=57409 07:26:38 Shutter LASER open 07:26:38 Received message from Camera: op=State serial=57411 07:26:38 GetSingleValue result=40 Value=cccccccc 07:26:38 SkyScan query 07:26:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:26:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:38 Parameters OK 07:26:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:38 Set A/D data flow result=40 07:26:38 Set A/D channel type result=40 07:26:38 Set A/D encoding result=40 07:26:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:38 Set channel filter=0.000000e+000 result=40 07:26:38 Config A/D Result=40 07:26:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:38 Get A/D filter: -9.255963e+061 result=40 07:26:38 Get A/D value=-858993460 result=40 07:26:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:38 Parameters OK 07:26:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:38 Set A/D data flow result=40 07:26:38 Set A/D channel type result=40 07:26:38 Set A/D encoding result=40 07:26:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:38 Set channel filter=0.000000e+000 result=40 07:26:38 Config A/D Result=40 07:26:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:38 Get A/D filter: -9.255963e+061 result=40 07:26:38 Get A/D value=-858993460 result=40 07:26:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:26:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:26:38 Aux= 07:26:38 Message to Camera, serial 57411 queued 07:26:47 Received message from Master: op=Shutter serial=57421 07:26:47 Shutter LASER close 07:26:47 Received message from Master: op=PointingHead serial=57425 07:26:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:26:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:26:48 Point started: ret=0 07:26:48 point_skyscan result=0 07:26:48 Check angles 07:26:48 SkyScan query 07:26:49 SkyScan query done: ret=0 az=89.85<-5990 ze=157.155<-1523 Statuses=0009 0009 07:26:49 Msec=0 True Az=89.85 Ze=157.155 Az status=0009 Ze status=0009 07:26:49 Check angles 07:26:49 SkyScan query 07:26:50 SkyScan query done: ret=0 az=71.94<-4796 ze=135.75<-2950 Statuses=0009 0009 07:26:50 Msec=750 True Az=71.94 Ze=135.75 Az status=0009 Ze status=0009 07:26:50 Check angles 07:26:50 SkyScan query 07:26:51 SkyScan query done: ret=0 az=54.39<-3626 ze=114.345<-4377 Statuses=0009 0009 07:26:51 Msec=1500 True Az=54.39 Ze=114.345 Az status=0009 Ze status=0009 07:26:51 Check angles 07:26:51 SkyScan query 07:26:51 SkyScan query done: ret=0 az=40.95<-2730 ze=93.42<-5772 Statuses=0009 0009 07:26:51 Msec=2250 True Az=40.95 Ze=93.42 Az status=0009 Ze status=0009 07:26:51 Check angles 07:26:51 SkyScan query 07:26:52 SkyScan query done: ret=0 az=40.995<-2733 ze=72.465<-7169 Statuses=0008 0009 07:26:52 Msec=3000 True Az=40.995 Ze=72.465 Az status=0008 Ze status=0009 07:26:52 Check angles 07:26:52 SkyScan query 07:26:53 SkyScan query done: ret=0 az=40.995<-2733 ze=52.275<-8515 Statuses=0008 0009 07:26:53 Msec=3750 True Az=40.995 Ze=52.275 Az status=0008 Ze status=0009 07:26:53 Check angles 07:26:53 SkyScan query 07:26:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:26:54 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:26:54 Message to Master queued w/err=0: serial=57425 error=0 07:26:59 Received message from Master: op=Filter serial=57426 07:26:59 Color wheel filter change from 0 to 0 07:26:59 FLIGetFilterPos err=0 currentPosition=0 07:26:59 FLIGetStepsRemaining err=0 RemainingSteps=0 07:26:59 Filter is already there-color wheel unchanged 07:26:59 Received message from Master: op=Shutter serial=57427 07:26:59 Shutter LASER close 07:26:59 Received message from Camera: op=State serial=57429 07:26:59 GetSingleValue result=40 Value=cccccccc 07:26:59 SkyScan query 07:26:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:26:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:59 Parameters OK 07:26:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:59 Set A/D data flow result=40 07:26:59 Set A/D channel type result=40 07:26:59 Set A/D encoding result=40 07:26:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:59 Set channel filter=0.000000e+000 result=40 07:26:59 Config A/D Result=40 07:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:59 Get A/D filter: -9.255963e+061 result=40 07:26:59 Get A/D value=-858993460 result=40 07:26:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:59 Parameters OK 07:26:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:59 Set A/D data flow result=40 07:26:59 Set A/D channel type result=40 07:26:59 Set A/D encoding result=40 07:26:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:59 Set channel filter=0.000000e+000 result=40 07:26:59 Config A/D Result=40 07:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:59 Get A/D filter: -9.255963e+061 result=40 07:26:59 Get A/D value=-858993460 result=40 07:26:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:26:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:26:59 Aux= 07:26:59 Message to Camera, serial 57429 queued 07:27:36 Received message from Master: op=PointingHead serial=57442 07:27:36 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:27:36 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:27:37 Point started: ret=0 07:27:37 point_skyscan result=0 07:27:37 Check angles 07:27:37 SkyScan query 07:27:38 SkyScan query done: ret=0 az=64.455<-4297 ze=66.555<-7563 Statuses=0009 0008 07:27:38 Msec=0 True Az=64.455 Ze=66.555 Az status=0009 Ze status=0008 07:27:38 Check angles 07:27:38 SkyScan query 07:27:39 SkyScan query done: ret=0 az=82.065<-5471 ze=66.495<-7567 Statuses=0009 0008 07:27:39 Msec=750 True Az=82.065 Ze=66.495 Az status=0009 Ze status=0008 07:27:39 Check angles 07:27:39 SkyScan query 07:27:39 SkyScan query done: ret=0 az=99.765<-6651 ze=66.495<-7567 Statuses=0009 0008 07:27:39 Msec=1500 True Az=99.765 Ze=66.495 Az status=0009 Ze status=0008 07:27:40 Check angles 07:27:40 SkyScan query 07:27:40 SkyScan query done: ret=0 az=117.33<-7822 ze=66.495<-7567 Statuses=0009 0008 07:27:40 Msec=2250 True Az=117.33 Ze=66.495 Az status=0009 Ze status=0008 07:27:40 Check angles 07:27:40 SkyScan query 07:27:41 SkyScan query done: ret=0 az=134.895<-8993 ze=66.495<-7567 Statuses=0009 0008 07:27:41 Msec=3000 True Az=134.895 Ze=66.495 Az status=0009 Ze status=0008 07:27:41 Check angles 07:27:41 SkyScan query 07:27:42 SkyScan query done: ret=0 az=152.76<-10184 ze=66.495<-7567 Statuses=0009 0008 07:27:42 Msec=3750 True Az=152.76 Ze=66.495 Az status=0009 Ze status=0008 07:27:42 Check angles 07:27:42 SkyScan query 07:27:43 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:27:43 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 07:27:43 Message to Master queued w/err=0: serial=57442 error=0 07:27:48 Received message from Master: op=Filter serial=57443 07:27:48 Color wheel filter change from 0 to 0 07:27:48 FLIGetFilterPos err=0 currentPosition=0 07:27:48 FLIGetStepsRemaining err=0 RemainingSteps=0 07:27:48 Filter is already there-color wheel unchanged 07:27:48 Received message from Master: op=Shutter serial=57444 07:27:48 Shutter LASER close 07:27:48 Received message from Camera: op=State serial=57446 07:27:48 GetSingleValue result=40 Value=cccccccc 07:27:48 SkyScan query 07:27:48 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:27:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:48 Parameters OK 07:27:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:48 Set A/D data flow result=40 07:27:48 Set A/D channel type result=40 07:27:48 Set A/D encoding result=40 07:27:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:48 Set channel filter=0.000000e+000 result=40 07:27:48 Config A/D Result=40 07:27:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:48 Get A/D filter: -9.255963e+061 result=40 07:27:48 Get A/D value=-858993460 result=40 07:27:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:48 Parameters OK 07:27:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:48 Set A/D data flow result=40 07:27:48 Set A/D channel type result=40 07:27:48 Set A/D encoding result=40 07:27:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:48 Set channel filter=0.000000e+000 result=40 07:27:48 Config A/D Result=40 07:27:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:48 Get A/D filter: -9.255963e+061 result=40 07:27:48 Get A/D value=-858993460 result=40 07:27:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:48 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:27:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:27:48 Aux= 07:27:48 Message to Camera, serial 57446 queued 07:28:24 Received message from Master: op=PointingHead serial=57458 07:28:24 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:28:24 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:28:25 Point started: ret=0 07:28:25 point_skyscan result=0 07:28:25 Check angles 07:28:25 SkyScan query 07:28:26 SkyScan query done: ret=0 az=135.045<-9003 ze=36.75<-9550 Statuses=0009 0009 07:28:26 Msec=0 True Az=135.045 Ze=36.75 Az status=0009 Ze status=0009 07:28:26 Check angles 07:28:26 SkyScan query 07:28:27 SkyScan query done: ret=0 az=117.075<-7805 ze=15.36<-10976 Statuses=0009 0009 07:28:27 Msec=750 True Az=117.075 Ze=15.36 Az status=0009 Ze status=0009 07:28:27 Check angles 07:28:27 SkyScan query 07:28:27 SkyScan query done: ret=0 az=99.39<-6626 ze=-6.015<-12401 Statuses=0009 0009 07:28:27 Msec=1500 True Az=99.39 Ze=-6.015 Az status=0009 Ze status=0009 07:28:28 Check angles 07:28:28 SkyScan query 07:28:28 SkyScan query done: ret=0 az=81.96<-5464 ze=-26.97<-13798 Statuses=0009 0009 07:28:28 Msec=2250 True Az=81.96 Ze=-26.97 Az status=0009 Ze status=0009 07:28:28 Check angles 07:28:28 SkyScan query 07:28:29 SkyScan query done: ret=0 az=64.11<-4274 ze=-38.565<-14571 Statuses=0009 0008 07:28:29 Msec=3000 True Az=64.11 Ze=-38.565 Az status=0009 Ze status=0008 07:28:29 Check angles 07:28:29 SkyScan query 07:28:30 SkyScan query done: ret=0 az=46.335<-3089 ze=-38.52<-14568 Statuses=0009 0008 07:28:30 Msec=3750 True Az=46.335 Ze=-38.52 Az status=0009 Ze status=0008 07:28:30 Check angles 07:28:30 SkyScan query 07:28:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:28:30 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:28:30 Message to Master queued w/err=0: serial=57458 error=0 07:28:35 Received message from Master: op=Filter serial=57459 07:28:35 Color wheel filter change from 0 to 0 07:28:35 FLIGetFilterPos err=0 currentPosition=0 07:28:35 FLIGetStepsRemaining err=0 RemainingSteps=0 07:28:35 Filter is already there-color wheel unchanged 07:28:36 Received message from Master: op=Shutter serial=57460 07:28:36 Shutter LASER close 07:28:36 Received message from Camera: op=State serial=57462 07:28:36 GetSingleValue result=40 Value=cccccccc 07:28:36 SkyScan query 07:28:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:28:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:36 Parameters OK 07:28:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:36 Set A/D data flow result=40 07:28:36 Set A/D channel type result=40 07:28:36 Set A/D encoding result=40 07:28:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:36 Set channel filter=0.000000e+000 result=40 07:28:36 Config A/D Result=40 07:28:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:36 Get A/D filter: -9.255963e+061 result=40 07:28:36 Get A/D value=-858993460 result=40 07:28:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:36 Parameters OK 07:28:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:36 Set A/D data flow result=40 07:28:36 Set A/D channel type result=40 07:28:36 Set A/D encoding result=40 07:28:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:36 Set channel filter=0.000000e+000 result=40 07:28:36 Config A/D Result=40 07:28:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:36 Get A/D filter: -9.255963e+061 result=40 07:28:36 Get A/D value=-858993460 result=40 07:28:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:28:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:28:36 Aux= 07:28:36 Message to Camera, serial 57462 queued 07:29:13 Received message from Master: op=PointingHead serial=57475 07:29:13 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:29:13 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:29:13 Point started: ret=0 07:29:13 point_skyscan result=0 07:29:14 Check angles 07:29:14 SkyScan query 07:29:15 SkyScan query done: ret=0 az=64.065<-4271 ze=-68.37<-16558 Statuses=0009 0009 07:29:15 Msec=0 True Az=64.065 Ze=-68.37 Az status=0009 Ze status=0009 07:29:15 Check angles 07:29:15 SkyScan query 07:29:15 SkyScan query done: ret=0 az=81.48<-5432 ze=-89.4<-17960 Statuses=0009 0009 07:29:15 Msec=750 True Az=81.48 Ze=-89.4 Az status=0009 Ze status=0009 07:29:16 Check angles 07:29:16 SkyScan query 07:29:16 SkyScan query done: ret=0 az=98.955<-6597 ze=-110.31<-19354 Statuses=0009 0009 07:29:16 Msec=1500 True Az=98.955 Ze=-110.31 Az status=0009 Ze status=0009 07:29:16 Check angles 07:29:16 SkyScan query 07:29:17 SkyScan query done: ret=0 az=116.61<-7774 ze=-131.265<-20751 Statuses=0009 0009 07:29:17 Msec=2250 True Az=116.61 Ze=-131.265 Az status=0009 Ze status=0009 07:29:17 Check angles 07:29:17 SkyScan query 07:29:18 SkyScan query done: ret=0 az=131.19<-8746 ze=-141.54<-21436 Statuses=0009 0008 07:29:18 Msec=3000 True Az=131.19 Ze=-141.54 Az status=0009 Ze status=0008 07:29:18 Check angles 07:29:18 SkyScan query 07:29:18 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:29:18 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:29:18 Message to Master queued w/err=0: serial=57475 error=0 07:29:23 Received message from Master: op=Filter serial=57476 07:29:23 Color wheel filter change from 0 to 0 07:29:23 FLIGetFilterPos err=0 currentPosition=0 07:29:23 FLIGetStepsRemaining err=0 RemainingSteps=0 07:29:23 Filter is already there-color wheel unchanged 07:29:24 Received message from Master: op=Shutter serial=57477 07:29:24 Shutter LASER close 07:29:24 Received message from Camera: op=State serial=57479 07:29:24 GetSingleValue result=40 Value=cccccccc 07:29:24 SkyScan query 07:29:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:29:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:24 Parameters OK 07:29:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:24 Set A/D data flow result=40 07:29:24 Set A/D channel type result=40 07:29:24 Set A/D encoding result=40 07:29:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:24 Set channel filter=0.000000e+000 result=40 07:29:24 Config A/D Result=40 07:29:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:24 Get A/D filter: -9.255963e+061 result=40 07:29:24 Get A/D value=-858993460 result=40 07:29:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:24 Parameters OK 07:29:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:24 Set A/D data flow result=40 07:29:24 Set A/D channel type result=40 07:29:24 Set A/D encoding result=40 07:29:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:24 Set channel filter=0.000000e+000 result=40 07:29:24 Config A/D Result=40 07:29:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:24 Get A/D filter: -9.255963e+061 result=40 07:29:24 Get A/D value=-858993460 result=40 07:29:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:24 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:29:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:29:24 Aux= 07:29:24 Message to Camera, serial 57479 queued 07:30:01 Received message from Master: op=PointingHead serial=57492 07:30:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:30:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:30:02 Point started: ret=0 07:30:02 point_skyscan result=0 07:30:02 Check angles 07:30:02 SkyScan query 07:30:03 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.375<-23425 Statuses=0009 0009 07:30:03 Msec=0 True Az=113.01 Ze=-171.375 Az status=0009 Ze status=0009 07:30:03 Check angles 07:30:03 SkyScan query 07:30:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:30:04 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:30:04 Message to Master queued w/err=0: serial=57492 error=0 07:30:09 Received message from Master: op=Filter serial=57493 07:30:09 Color wheel filter change from 0 to 0 07:30:09 FLIGetFilterPos err=0 currentPosition=0 07:30:09 FLIGetStepsRemaining err=0 RemainingSteps=0 07:30:09 Filter is already there-color wheel unchanged 07:30:09 Received message from Master: op=Shutter serial=57494 07:30:09 Shutter LASER open 07:30:09 Received message from Camera: op=State serial=57496 07:30:09 GetSingleValue result=40 Value=cccccccc 07:30:09 SkyScan query 07:30:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:30:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:10 Parameters OK 07:30:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:10 Set A/D data flow result=40 07:30:10 Set A/D channel type result=40 07:30:10 Set A/D encoding result=40 07:30:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:10 Set channel filter=0.000000e+000 result=40 07:30:10 Config A/D Result=40 07:30:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:10 Get A/D filter: -9.255963e+061 result=40 07:30:10 Get A/D value=-858993460 result=40 07:30:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:10 Parameters OK 07:30:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:10 Set A/D data flow result=40 07:30:10 Set A/D channel type result=40 07:30:10 Set A/D encoding result=40 07:30:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:10 Set channel filter=0.000000e+000 result=40 07:30:10 Config A/D Result=40 07:30:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:10 Get A/D filter: -9.255963e+061 result=40 07:30:10 Get A/D value=-858993460 result=40 07:30:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:30:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:30:10 Aux= 07:30:10 Message to Camera, serial 57496 queued 07:30:18 Received message from Master: op=Shutter serial=57506 07:30:18 Shutter LASER close 07:30:19 Received message from Master: op=PointingHead serial=57510 07:30:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:30:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:30:19 Point started: ret=0 07:30:19 point_skyscan result=0 07:30:20 Check angles 07:30:20 SkyScan query 07:30:20 SkyScan query done: ret=0 az=136.395<-9093 ze=-142.725<-21515 Statuses=0009 0009 07:30:20 Msec=0 True Az=136.395 Ze=-142.725 Az status=0009 Ze status=0009 07:30:20 Check angles 07:30:20 SkyScan query 07:30:21 SkyScan query done: ret=0 az=153.87<-10258 ze=-121.755<-20117 Statuses=0009 0009 07:30:21 Msec=750 True Az=153.87 Ze=-121.755 Az status=0009 Ze status=0009 07:30:21 Check angles 07:30:21 SkyScan query 07:30:22 SkyScan query done: ret=0 az=171.765<-11451 ze=-100.335<-18689 Statuses=0009 0009 07:30:22 Msec=1500 True Az=171.765 Ze=-100.335 Az status=0009 Ze status=0009 07:30:22 Check angles 07:30:22 SkyScan query 07:30:23 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.41<-17294 Statuses=0008 0009 07:30:23 Msec=2250 True Az=176.025 Ze=-79.41 Az status=0008 Ze status=0009 07:30:23 Check angles 07:30:23 SkyScan query 07:30:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.425<-15895 Statuses=0008 0009 07:30:23 Msec=3000 True Az=175.995 Ze=-58.425 Az status=0008 Ze status=0009 07:30:23 Check angles 07:30:23 SkyScan query 07:30:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 07:30:24 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 07:30:24 Message to Master queued w/err=0: serial=57510 error=0 07:30:29 Received message from Master: op=Filter serial=57511 07:30:29 Color wheel filter change from 0 to 0 07:30:29 FLIGetFilterPos err=0 currentPosition=0 07:30:29 FLIGetStepsRemaining err=0 RemainingSteps=0 07:30:29 Filter is already there-color wheel unchanged 07:30:29 Received message from Master: op=Shutter serial=57512 07:30:29 Shutter LASER close 07:30:29 Received message from Camera: op=State serial=57514 07:30:29 GetSingleValue result=40 Value=cccccccc 07:30:29 SkyScan query 07:30:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:30:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:30 Parameters OK 07:30:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:30 Set A/D data flow result=40 07:30:30 Set A/D channel type result=40 07:30:30 Set A/D encoding result=40 07:30:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:30 Set channel filter=0.000000e+000 result=40 07:30:30 Config A/D Result=40 07:30:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:30 Get A/D filter: -9.255963e+061 result=40 07:30:30 Get A/D value=-858993460 result=40 07:30:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:30 Parameters OK 07:30:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:30 Set A/D data flow result=40 07:30:30 Set A/D channel type result=40 07:30:30 Set A/D encoding result=40 07:30:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:30 Set channel filter=0.000000e+000 result=40 07:30:30 Config A/D Result=40 07:30:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:30 Get A/D filter: -9.255963e+061 result=40 07:30:30 Get A/D value=-858993460 result=40 07:30:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:30:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:30:30 Aux= 07:30:30 Message to Camera, serial 57514 queued 07:31:07 Received message from Master: op=PointingHead serial=57527 07:31:07 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:31:07 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:31:07 Point started: ret=0 07:31:07 point_skyscan result=0 07:31:08 Check angles 07:31:08 SkyScan query 07:31:08 SkyScan query done: ret=0 az=152.685<-10179 ze=-21.27<-13418 Statuses=0009 0009 07:31:08 Msec=0 True Az=152.685 Ze=-21.27 Az status=0009 Ze status=0009 07:31:09 Check angles 07:31:09 SkyScan query 07:31:09 SkyScan query done: ret=0 az=135.225<-9015 ze=-0.315<-12021 Statuses=0009 0009 07:31:09 Msec=750 True Az=135.225 Ze=-0.315 Az status=0009 Ze status=0009 07:31:09 Check angles 07:31:09 SkyScan query 07:31:10 SkyScan query done: ret=0 az=117.54<-7836 ze=20.64<-10624 Statuses=0009 0009 07:31:10 Msec=1500 True Az=117.54 Ze=20.64 Az status=0009 Ze status=0009 07:31:10 Check angles 07:31:10 SkyScan query 07:31:11 SkyScan query done: ret=0 az=100.125<-6675 ze=41.58<-9228 Statuses=0009 0009 07:31:11 Msec=2250 True Az=100.125 Ze=41.58 Az status=0009 Ze status=0009 07:31:11 Check angles 07:31:11 SkyScan query 07:31:11 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 07:31:11 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 07:31:12 Check angles 07:31:12 SkyScan query 07:31:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:31:12 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:31:12 Message to Master queued w/err=0: serial=57527 error=0 07:31:17 Received message from Master: op=Filter serial=57528 07:31:17 Color wheel filter change from 0 to 0 07:31:17 FLIGetFilterPos err=0 currentPosition=0 07:31:17 FLIGetStepsRemaining err=0 RemainingSteps=0 07:31:17 Filter is already there-color wheel unchanged 07:31:17 Received message from Master: op=Shutter serial=57529 07:31:17 Shutter LASER close 07:31:17 Received message from Camera: op=State serial=57531 07:31:17 GetSingleValue result=40 Value=cccccccc 07:31:17 SkyScan query 07:31:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:31:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:18 Parameters OK 07:31:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:18 Set A/D data flow result=40 07:31:18 Set A/D channel type result=40 07:31:18 Set A/D encoding result=40 07:31:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:18 Set channel filter=0.000000e+000 result=40 07:31:18 Config A/D Result=40 07:31:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:18 Get A/D filter: -9.255963e+061 result=40 07:31:18 Get A/D value=-858993460 result=40 07:31:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:18 Parameters OK 07:31:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:18 Set A/D data flow result=40 07:31:18 Set A/D channel type result=40 07:31:18 Set A/D encoding result=40 07:31:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:18 Set channel filter=0.000000e+000 result=40 07:31:18 Config A/D Result=40 07:31:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:18 Get A/D filter: -9.255963e+061 result=40 07:31:18 Get A/D value=-858993460 result=40 07:31:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:31:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:31:18 Aux= 07:31:18 Message to Camera, serial 57531 queued 07:31:55 Received message from Master: op=PointingHead serial=57544 07:31:55 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:31:55 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:31:55 Point started: ret=0 07:31:55 point_skyscan result=0 07:31:56 Check angles 07:31:56 SkyScan query 07:31:57 SkyScan query done: ret=0 az=108.825<-7255 ze=38.475<-9435 Statuses=0009 0008 07:31:57 Msec=0 True Az=108.825 Ze=38.475 Az status=0009 Ze status=0008 07:31:57 Check angles 07:31:57 SkyScan query 07:31:57 SkyScan query done: ret=0 az=126.465<-8431 ze=38.505<-9433 Statuses=0009 0008 07:31:57 Msec=750 True Az=126.465 Ze=38.505 Az status=0009 Ze status=0008 07:31:57 Check angles 07:31:57 SkyScan query 07:31:58 SkyScan query done: ret=0 az=143.835<-9589 ze=38.505<-9433 Statuses=0009 0008 07:31:58 Msec=1500 True Az=143.835 Ze=38.505 Az status=0009 Ze status=0008 07:31:58 Check angles 07:31:58 SkyScan query 07:31:59 SkyScan query done: ret=0 az=161.295<-10753 ze=38.505<-9433 Statuses=0009 0008 07:31:59 Msec=2250 True Az=161.295 Ze=38.505 Az status=0009 Ze status=0008 07:31:59 Check angles 07:31:59 SkyScan query 07:32:00 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 07:32:00 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 07:32:00 Check angles 07:32:00 SkyScan query 07:32:00 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:32:00 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:32:00 Message to Master queued w/err=0: serial=57544 error=0 07:32:05 Received message from Master: op=Filter serial=57545 07:32:05 Color wheel filter change from 0 to 0 07:32:05 FLIGetFilterPos err=0 currentPosition=0 07:32:05 FLIGetStepsRemaining err=0 RemainingSteps=0 07:32:05 Filter is already there-color wheel unchanged 07:32:05 Received message from Master: op=Shutter serial=57546 07:32:05 Shutter LASER close 07:32:06 Received message from Camera: op=State serial=57548 07:32:06 GetSingleValue result=40 Value=cccccccc 07:32:06 SkyScan query 07:32:06 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:32:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:06 Parameters OK 07:32:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:06 Set A/D data flow result=40 07:32:06 Set A/D channel type result=40 07:32:06 Set A/D encoding result=40 07:32:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:06 Set channel filter=0.000000e+000 result=40 07:32:06 Config A/D Result=40 07:32:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:06 Get A/D filter: -9.255963e+061 result=40 07:32:06 Get A/D value=-858993460 result=40 07:32:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:06 Parameters OK 07:32:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:06 Set A/D data flow result=40 07:32:06 Set A/D channel type result=40 07:32:06 Set A/D encoding result=40 07:32:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:06 Set channel filter=0.000000e+000 result=40 07:32:06 Config A/D Result=40 07:32:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:06 Get A/D filter: -9.255963e+061 result=40 07:32:06 Get A/D value=-858993460 result=40 07:32:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:32:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:32:06 Aux= 07:32:06 Message to Camera, serial 57548 queued 07:32:43 Received message from Master: op=PointingHead serial=57561 07:32:43 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:32:43 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:32:43 Point started: ret=0 07:32:43 point_skyscan result=0 07:32:44 Check angles 07:32:44 SkyScan query 07:32:45 SkyScan query done: ret=0 az=153.105<-10207 ze=8.76<-11416 Statuses=0009 0009 07:32:45 Msec=0 True Az=153.105 Ze=8.76 Az status=0009 Ze status=0009 07:32:45 Check angles 07:32:45 SkyScan query 07:32:45 SkyScan query done: ret=0 az=135.78<-9052 ze=-12.15<-12810 Statuses=0009 0009 07:32:45 Msec=750 True Az=135.78 Ze=-12.15 Az status=0009 Ze status=0009 07:32:46 Check angles 07:32:46 SkyScan query 07:32:46 SkyScan query done: ret=0 az=118.14<-7876 ze=-33.045<-14203 Statuses=0009 0009 07:32:46 Msec=1500 True Az=118.14 Ze=-33.045 Az status=0009 Ze status=0009 07:32:46 Check angles 07:32:46 SkyScan query 07:32:47 SkyScan query done: ret=0 az=100.29<-6686 ze=-51.555<-15437 Statuses=0009 0009 07:32:47 Msec=2250 True Az=100.29 Ze=-51.555 Az status=0009 Ze status=0009 07:32:47 Check angles 07:32:47 SkyScan query 07:32:48 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 07:32:48 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 07:32:48 Check angles 07:32:48 SkyScan query 07:32:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:32:48 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:32:48 Message to Master queued w/err=0: serial=57561 error=0 07:32:53 Received message from Master: op=Filter serial=57562 07:32:53 Color wheel filter change from 0 to 0 07:32:53 FLIGetFilterPos err=0 currentPosition=0 07:32:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:32:53 Filter is already there-color wheel unchanged 07:32:54 Received message from Master: op=Shutter serial=57563 07:32:54 Shutter LASER close 07:32:54 Received message from Camera: op=State serial=57565 07:32:54 GetSingleValue result=40 Value=cccccccc 07:32:54 SkyScan query 07:32:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:32:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:54 Parameters OK 07:32:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:54 Set A/D data flow result=40 07:32:54 Set A/D channel type result=40 07:32:54 Set A/D encoding result=40 07:32:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:54 Set channel filter=0.000000e+000 result=40 07:32:54 Config A/D Result=40 07:32:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:54 Get A/D filter: -9.255963e+061 result=40 07:32:54 Get A/D value=-858993460 result=40 07:32:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:54 Parameters OK 07:32:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:54 Set A/D data flow result=40 07:32:54 Set A/D channel type result=40 07:32:54 Set A/D encoding result=40 07:32:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:54 Set channel filter=0.000000e+000 result=40 07:32:54 Config A/D Result=40 07:32:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:54 Get A/D filter: -9.255963e+061 result=40 07:32:54 Get A/D value=-858993460 result=40 07:32:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:54 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:32:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:32:54 Aux= 07:32:54 Message to Camera, serial 57565 queued 07:33:31 Received message from Master: op=PointingHead serial=57578 07:33:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:33:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:33:31 Point started: ret=0 07:33:31 point_skyscan result=0 07:33:32 Check angles 07:33:32 SkyScan query 07:33:33 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.33<-17422 Statuses=0009 0009 07:33:33 Msec=0 True Az=109.02 Ze=-81.33 Az status=0009 Ze status=0009 07:33:33 Check angles 07:33:33 SkyScan query 07:33:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.735<-18849 Statuses=0008 0009 07:33:33 Msec=750 True Az=112.995 Ze=-102.735 Az status=0008 Ze status=0009 07:33:34 Check angles 07:33:34 SkyScan query 07:33:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.675<-20245 Statuses=0008 0009 07:33:34 Msec=1500 True Az=112.995 Ze=-123.675 Az status=0008 Ze status=0009 07:33:34 Check angles 07:33:34 SkyScan query 07:33:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.63<-21642 Statuses=0008 0009 07:33:35 Msec=2250 True Az=112.995 Ze=-144.63 Az status=0008 Ze status=0009 07:33:35 Check angles 07:33:35 SkyScan query 07:33:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.57<-23038 Statuses=0008 0009 07:33:36 Msec=3000 True Az=112.995 Ze=-165.57 Az status=0008 Ze status=0009 07:33:36 Check angles 07:33:36 SkyScan query 07:33:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:33:36 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:33:36 Message to Master queued w/err=0: serial=57578 error=0 07:33:41 Received message from Master: op=Filter serial=57579 07:33:41 Color wheel filter change from 0 to 0 07:33:41 FLIGetFilterPos err=0 currentPosition=0 07:33:41 FLIGetStepsRemaining err=0 RemainingSteps=0 07:33:41 Filter is already there-color wheel unchanged 07:33:42 Received message from Master: op=Shutter serial=57580 07:33:42 Shutter LASER open 07:33:42 Received message from Camera: op=State serial=57582 07:33:42 GetSingleValue result=40 Value=cccccccc 07:33:42 SkyScan query 07:33:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:33:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:42 Parameters OK 07:33:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:42 Set A/D data flow result=40 07:33:42 Set A/D channel type result=40 07:33:42 Set A/D encoding result=40 07:33:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:42 Set channel filter=0.000000e+000 result=40 07:33:42 Config A/D Result=40 07:33:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:42 Get A/D filter: -9.255963e+061 result=40 07:33:42 Get A/D value=-858993460 result=40 07:33:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:42 Parameters OK 07:33:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:42 Set A/D data flow result=40 07:33:42 Set A/D channel type result=40 07:33:42 Set A/D encoding result=40 07:33:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:42 Set channel filter=0.000000e+000 result=40 07:33:42 Config A/D Result=40 07:33:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:42 Get A/D filter: -9.255963e+061 result=40 07:33:42 Get A/D value=-858993460 result=40 07:33:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:33:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:33:42 Aux= 07:33:42 Message to Camera, serial 57582 queued 07:33:51 Received message from Master: op=Shutter serial=57592 07:33:51 Shutter LASER close 07:33:51 Received message from Master: op=PointingHead serial=57596 07:33:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:33:51 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:33:52 Point started: ret=0 07:33:52 point_skyscan result=0 07:33:52 Check angles 07:33:52 SkyScan query 07:33:53 SkyScan query done: ret=0 az=89.505<-5967 ze=156.96<-1536 Statuses=0009 0009 07:33:53 Msec=0 True Az=89.505 Ze=156.96 Az status=0009 Ze status=0009 07:33:53 Check angles 07:33:53 SkyScan query 07:33:54 SkyScan query done: ret=0 az=71.565<-4771 ze=135.57<-2962 Statuses=0009 0009 07:33:54 Msec=750 True Az=71.565 Ze=135.57 Az status=0009 Ze status=0009 07:33:54 Check angles 07:33:54 SkyScan query 07:33:54 SkyScan query done: ret=0 az=54.465<-3631 ze=114.585<-4361 Statuses=0009 0009 07:33:54 Msec=1500 True Az=54.465 Ze=114.585 Az status=0009 Ze status=0009 07:33:55 Check angles 07:33:55 SkyScan query 07:33:55 SkyScan query done: ret=0 az=40.95<-2730 ze=93.66<-5756 Statuses=0009 0009 07:33:55 Msec=2250 True Az=40.95 Ze=93.66 Az status=0009 Ze status=0009 07:33:55 Check angles 07:33:55 SkyScan query 07:33:56 SkyScan query done: ret=0 az=40.995<-2733 ze=72.69<-7154 Statuses=0008 0009 07:33:56 Msec=3000 True Az=40.995 Ze=72.69 Az status=0008 Ze status=0009 07:33:56 Check angles 07:33:56 SkyScan query 07:33:57 SkyScan query done: ret=0 az=40.995<-2733 ze=52.17<-8522 Statuses=0008 0009 07:33:57 Msec=3750 True Az=40.995 Ze=52.17 Az status=0008 Ze status=0009 07:33:57 Check angles 07:33:57 SkyScan query 07:33:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:33:57 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:33:57 Message to Master queued w/err=0: serial=57596 error=0 07:34:02 Received message from Master: op=Filter serial=57597 07:34:02 Color wheel filter change from 0 to 0 07:34:02 FLIGetFilterPos err=0 currentPosition=0 07:34:02 FLIGetStepsRemaining err=0 RemainingSteps=0 07:34:02 Filter is already there-color wheel unchanged 07:34:03 Received message from Master: op=Shutter serial=57598 07:34:03 Shutter LASER close 07:34:03 Received message from Camera: op=State serial=57600 07:34:03 GetSingleValue result=40 Value=cccccccc 07:34:03 SkyScan query 07:34:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:34:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:03 Parameters OK 07:34:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:03 Set A/D data flow result=40 07:34:03 Set A/D channel type result=40 07:34:03 Set A/D encoding result=40 07:34:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:03 Set channel filter=0.000000e+000 result=40 07:34:03 Config A/D Result=40 07:34:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:03 Get A/D filter: -9.255963e+061 result=40 07:34:03 Get A/D value=-858993460 result=40 07:34:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:03 Parameters OK 07:34:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:03 Set A/D data flow result=40 07:34:03 Set A/D channel type result=40 07:34:03 Set A/D encoding result=40 07:34:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:03 Set channel filter=0.000000e+000 result=40 07:34:03 Config A/D Result=40 07:34:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:03 Get A/D filter: -9.255963e+061 result=40 07:34:03 Get A/D value=-858993460 result=40 07:34:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:34:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:34:03 Aux= 07:34:03 Message to Camera, serial 57600 queued 07:34:40 Received message from Master: op=PointingHead serial=57613 07:34:40 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:34:40 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:34:41 Point started: ret=0 07:34:41 point_skyscan result=0 07:34:41 Check angles 07:34:41 SkyScan query 07:34:42 SkyScan query done: ret=0 az=64.425<-4295 ze=66.555<-7563 Statuses=0009 0008 07:34:42 Msec=0 True Az=64.425 Ze=66.555 Az status=0009 Ze status=0008 07:34:42 Check angles 07:34:42 SkyScan query 07:34:43 SkyScan query done: ret=0 az=82.23<-5482 ze=66.495<-7567 Statuses=0009 0008 07:34:43 Msec=750 True Az=82.23 Ze=66.495 Az status=0009 Ze status=0008 07:34:43 Check angles 07:34:43 SkyScan query 07:34:43 SkyScan query done: ret=0 az=99.705<-6647 ze=66.495<-7567 Statuses=0009 0008 07:34:43 Msec=1500 True Az=99.705 Ze=66.495 Az status=0009 Ze status=0008 07:34:44 Check angles 07:34:44 SkyScan query 07:34:44 SkyScan query done: ret=0 az=117.3<-7820 ze=66.495<-7567 Statuses=0009 0008 07:34:44 Msec=2250 True Az=117.3 Ze=66.495 Az status=0009 Ze status=0008 07:34:44 Check angles 07:34:44 SkyScan query 07:34:45 SkyScan query done: ret=0 az=134.88<-8992 ze=66.495<-7567 Statuses=0009 0008 07:34:45 Msec=3000 True Az=134.88 Ze=66.495 Az status=0009 Ze status=0008 07:34:45 Check angles 07:34:45 SkyScan query 07:34:46 SkyScan query done: ret=0 az=152.445<-10163 ze=66.495<-7567 Statuses=0009 0008 07:34:46 Msec=3750 True Az=152.445 Ze=66.495 Az status=0009 Ze status=0008 07:34:46 Check angles 07:34:46 SkyScan query 07:34:46 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:34:46 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 07:34:46 Message to Master queued w/err=0: serial=57613 error=0 07:34:51 Received message from Master: op=Filter serial=57614 07:34:51 Color wheel filter change from 0 to 0 07:34:51 FLIGetFilterPos err=0 currentPosition=0 07:34:51 FLIGetStepsRemaining err=0 RemainingSteps=0 07:34:51 Filter is already there-color wheel unchanged 07:34:52 Received message from Master: op=Shutter serial=57615 07:34:52 Shutter LASER close 07:34:52 Received message from Camera: op=State serial=57617 07:34:52 GetSingleValue result=40 Value=cccccccc 07:34:52 SkyScan query 07:34:52 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:34:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:52 Parameters OK 07:34:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:52 Set A/D data flow result=40 07:34:52 Set A/D channel type result=40 07:34:52 Set A/D encoding result=40 07:34:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:52 Set channel filter=0.000000e+000 result=40 07:34:52 Config A/D Result=40 07:34:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:52 Get A/D filter: -9.255963e+061 result=40 07:34:52 Get A/D value=-858993460 result=40 07:34:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:52 Parameters OK 07:34:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:52 Set A/D data flow result=40 07:34:52 Set A/D channel type result=40 07:34:52 Set A/D encoding result=40 07:34:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:52 Set channel filter=0.000000e+000 result=40 07:34:52 Config A/D Result=40 07:34:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:52 Get A/D filter: -9.255963e+061 result=40 07:34:52 Get A/D value=-858993460 result=40 07:34:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:52 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:34:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:34:52 Aux= 07:34:52 Message to Camera, serial 57617 queued 07:35:29 Received message from Master: op=PointingHead serial=57630 07:35:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:35:29 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:35:29 Point started: ret=0 07:35:29 point_skyscan result=0 07:35:30 Check angles 07:35:30 SkyScan query 07:35:31 SkyScan query done: ret=0 az=135.105<-9007 ze=36.825<-9545 Statuses=0009 0009 07:35:31 Msec=0 True Az=135.105 Ze=36.825 Az status=0009 Ze status=0009 07:35:31 Check angles 07:35:31 SkyScan query 07:35:32 SkyScan query done: ret=0 az=117.24<-7816 ze=15.495<-10967 Statuses=0009 0009 07:35:32 Msec=750 True Az=117.24 Ze=15.495 Az status=0009 Ze status=0009 07:35:32 Check angles 07:35:32 SkyScan query 07:35:32 SkyScan query done: ret=0 az=99.84<-6656 ze=-5.505<-12367 Statuses=0009 0009 07:35:32 Msec=1500 True Az=99.84 Ze=-5.505 Az status=0009 Ze status=0009 07:35:32 Check angles 07:35:32 SkyScan query 07:35:33 SkyScan query done: ret=0 az=82.245<-5483 ze=-26.445<-13763 Statuses=0009 0009 07:35:33 Msec=2250 True Az=82.245 Ze=-26.445 Az status=0009 Ze status=0009 07:35:33 Check angles 07:35:33 SkyScan query [UTC 2018-12-11 07:35:34] 07:35:34 SkyScan query done: ret=0 az=64.845<-4323 ze=-38.58<-14572 Statuses=0009 0008 07:35:34 Msec=3000 True Az=64.845 Ze=-38.58 Az status=0009 Ze status=0008 07:35:34 Check angles 07:35:34 SkyScan query 07:35:35 SkyScan query done: ret=0 az=47.37<-3158 ze=-38.52<-14568 Statuses=0009 0008 07:35:35 Msec=3750 True Az=47.37 Ze=-38.52 Az status=0009 Ze status=0008 07:35:35 Check angles 07:35:35 SkyScan query 07:35:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:35:35 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:35:35 Message to Master queued w/err=0: serial=57630 error=0 07:35:40 Received message from Master: op=Filter serial=57631 07:35:40 Color wheel filter change from 0 to 0 07:35:40 FLIGetFilterPos err=0 currentPosition=0 07:35:40 FLIGetStepsRemaining err=0 RemainingSteps=0 07:35:40 Filter is already there-color wheel unchanged 07:35:40 Received message from Master: op=Shutter serial=57632 07:35:40 Shutter LASER close 07:35:41 Received message from Camera: op=State serial=57634 07:35:41 GetSingleValue result=40 Value=cccccccc 07:35:41 SkyScan query 07:35:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:35:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:41 Parameters OK 07:35:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:41 Set A/D data flow result=40 07:35:41 Set A/D channel type result=40 07:35:41 Set A/D encoding result=40 07:35:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:41 Set channel filter=0.000000e+000 result=40 07:35:41 Config A/D Result=40 07:35:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:41 Get A/D filter: -9.255963e+061 result=40 07:35:41 Get A/D value=-858993460 result=40 07:35:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:41 Parameters OK 07:35:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:41 Set A/D data flow result=40 07:35:41 Set A/D channel type result=40 07:35:41 Set A/D encoding result=40 07:35:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:41 Set channel filter=0.000000e+000 result=40 07:35:41 Config A/D Result=40 07:35:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:41 Get A/D filter: -9.255963e+061 result=40 07:35:41 Get A/D value=-858993460 result=40 07:35:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:35:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:35:41 Aux= 07:35:41 Message to Camera, serial 57634 queued [UTC 2018-12-11 07:35:54] 07:36:18 Received message from Master: op=PointingHead serial=57647 07:36:18 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:36:18 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:36:18 Point started: ret=0 07:36:18 point_skyscan result=0 07:36:19 Check angles 07:36:19 SkyScan query 07:36:20 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.01<-16534 Statuses=0009 0009 07:36:20 Msec=0 True Az=63.825 Ze=-68.01 Az status=0009 Ze status=0009 07:36:20 Check angles 07:36:20 SkyScan query 07:36:20 SkyScan query done: ret=0 az=81.15<-5410 ze=-89.01<-17934 Statuses=0009 0009 07:36:20 Msec=750 True Az=81.15 Ze=-89.01 Az status=0009 Ze status=0009 07:36:21 Check angles 07:36:21 SkyScan query 07:36:21 SkyScan query done: ret=0 az=98.7<-6580 ze=-109.92<-19328 Statuses=0009 0009 07:36:21 Msec=1500 True Az=98.7 Ze=-109.92 Az status=0009 Ze status=0009 07:36:21 Check angles 07:36:21 SkyScan query 07:36:22 SkyScan query done: ret=0 az=116.79<-7786 ze=-131.34<-20756 Statuses=0009 0009 07:36:22 Msec=2250 True Az=116.79 Ze=-131.34 Az status=0009 Ze status=0009 07:36:22 Check angles 07:36:22 SkyScan query 07:36:23 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 07:36:23 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 07:36:23 Check angles 07:36:23 SkyScan query 07:36:23 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:36:23 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:36:23 Message to Master queued w/err=0: serial=57647 error=0 07:36:28 Received message from Master: op=Filter serial=57648 07:36:28 Color wheel filter change from 0 to 0 07:36:28 FLIGetFilterPos err=0 currentPosition=0 07:36:28 FLIGetStepsRemaining err=0 RemainingSteps=0 07:36:28 Filter is already there-color wheel unchanged 07:36:29 Received message from Master: op=Shutter serial=57649 07:36:29 Shutter LASER close 07:36:29 Received message from Camera: op=State serial=57651 07:36:29 GetSingleValue result=40 Value=cccccccc 07:36:29 SkyScan query 07:36:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:36:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:29 Parameters OK 07:36:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:29 Set A/D data flow result=40 07:36:29 Set A/D channel type result=40 07:36:29 Set A/D encoding result=40 07:36:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:29 Set channel filter=0.000000e+000 result=40 07:36:29 Config A/D Result=40 07:36:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:29 Get A/D filter: -9.255963e+061 result=40 07:36:29 Get A/D value=-858993460 result=40 07:36:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:29 Parameters OK 07:36:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:29 Set A/D data flow result=40 07:36:29 Set A/D channel type result=40 07:36:29 Set A/D encoding result=40 07:36:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:29 Set channel filter=0.000000e+000 result=40 07:36:29 Config A/D Result=40 07:36:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:29 Get A/D filter: -9.255963e+061 result=40 07:36:29 Get A/D value=-858993460 result=40 07:36:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:29 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:36:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:36:29 Aux= 07:36:29 Message to Camera, serial 57651 queued 07:37:06 Received message from Master: op=PointingHead serial=57664 07:37:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:37:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:37:06 Point started: ret=0 07:37:06 point_skyscan result=0 07:37:07 Check angles 07:37:07 SkyScan query 07:37:08 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 07:37:08 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 07:37:08 Check angles 07:37:08 SkyScan query 07:37:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:37:08 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:37:08 Message to Master queued w/err=0: serial=57664 error=0 07:37:13 Received message from Master: op=Filter serial=57665 07:37:13 Color wheel filter change from 0 to 0 07:37:13 FLIGetFilterPos err=0 currentPosition=0 07:37:13 FLIGetStepsRemaining err=0 RemainingSteps=0 07:37:13 Filter is already there-color wheel unchanged 07:37:14 Received message from Master: op=Shutter serial=57666 07:37:14 Shutter LASER open 07:37:14 Received message from Camera: op=State serial=57668 07:37:14 GetSingleValue result=40 Value=cccccccc 07:37:14 SkyScan query 07:37:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:37:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:14 Parameters OK 07:37:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:14 Set A/D data flow result=40 07:37:14 Set A/D channel type result=40 07:37:14 Set A/D encoding result=40 07:37:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:14 Set channel filter=0.000000e+000 result=40 07:37:14 Config A/D Result=40 07:37:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:14 Get A/D filter: -9.255963e+061 result=40 07:37:14 Get A/D value=-858993460 result=40 07:37:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:14 Parameters OK 07:37:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:14 Set A/D data flow result=40 07:37:14 Set A/D channel type result=40 07:37:14 Set A/D encoding result=40 07:37:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:14 Set channel filter=0.000000e+000 result=40 07:37:14 Config A/D Result=40 07:37:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:14 Get A/D filter: -9.255963e+061 result=40 07:37:14 Get A/D value=-858993460 result=40 07:37:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:37:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:37:14 Aux= 07:37:14 Message to Camera, serial 57668 queued 07:37:23 Received message from Master: op=Shutter serial=57678 07:37:23 Shutter LASER close 07:37:23 Received message from Master: op=PointingHead serial=57682 07:37:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:37:23 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:37:24 Point started: ret=0 07:37:24 point_skyscan result=0 07:37:24 Check angles 07:37:24 SkyScan query 07:37:25 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.46<-21564 Statuses=0009 0009 07:37:25 Msec=0 True Az=135.765 Ze=-143.46 Az status=0009 Ze status=0009 07:37:25 Check angles 07:37:25 SkyScan query 07:37:26 SkyScan query done: ret=0 az=153.345<-10223 ze=-122.49<-20166 Statuses=0009 0009 07:37:26 Msec=750 True Az=153.345 Ze=-122.49 Az status=0009 Ze status=0009 07:37:26 Check angles 07:37:26 SkyScan query 07:37:27 SkyScan query done: ret=0 az=170.7<-11380 ze=-101.595<-18773 Statuses=0009 0009 07:37:27 Msec=1500 True Az=170.7 Ze=-101.595 Az status=0009 Ze status=0009 07:37:27 Check angles 07:37:27 SkyScan query 07:37:27 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.565<-17371 Statuses=0008 0009 07:37:27 Msec=2250 True Az=176.025 Ze=-80.565 Az status=0008 Ze status=0009 07:37:27 Check angles 07:37:27 SkyScan query 07:37:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.655<-15977 Statuses=0008 0009 07:37:28 Msec=3000 True Az=175.995 Ze=-59.655 Az status=0008 Ze status=0009 07:37:28 Check angles 07:37:28 SkyScan query 07:37:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 07:37:29 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 07:37:29 Message to Master queued w/err=0: serial=57682 error=0 07:37:34 Received message from Master: op=Filter serial=57683 07:37:34 Color wheel filter change from 0 to 0 07:37:34 FLIGetFilterPos err=0 currentPosition=0 07:37:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:37:34 Filter is already there-color wheel unchanged 07:37:34 Received message from Master: op=Shutter serial=57684 07:37:34 Shutter LASER close 07:37:34 Received message from Camera: op=State serial=57686 07:37:34 GetSingleValue result=40 Value=cccccccc 07:37:34 SkyScan query 07:37:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:37:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:35 Parameters OK 07:37:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:35 Set A/D data flow result=40 07:37:35 Set A/D channel type result=40 07:37:35 Set A/D encoding result=40 07:37:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:35 Set channel filter=0.000000e+000 result=40 07:37:35 Config A/D Result=40 07:37:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:35 Get A/D filter: -9.255963e+061 result=40 07:37:35 Get A/D value=-858993460 result=40 07:37:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:35 Parameters OK 07:37:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:35 Set A/D data flow result=40 07:37:35 Set A/D channel type result=40 07:37:35 Set A/D encoding result=40 07:37:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:35 Set channel filter=0.000000e+000 result=40 07:37:35 Config A/D Result=40 07:37:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:35 Get A/D filter: -9.255963e+061 result=40 07:37:35 Get A/D value=-858993460 result=40 07:37:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:37:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:37:35 Aux= 07:37:35 Message to Camera, serial 57686 queued 07:38:12 Received message from Master: op=PointingHead serial=57699 07:38:12 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:38:12 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:38:12 Point started: ret=0 07:38:12 point_skyscan result=0 07:38:13 Check angles 07:38:13 SkyScan query 07:38:13 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.9<-13460 Statuses=0009 0009 07:38:13 Msec=0 True Az=153.105 Ze=-21.9 Az status=0009 Ze status=0009 07:38:13 Check angles 07:38:13 SkyScan query 07:38:14 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.48<-12032 Statuses=0009 0009 07:38:14 Msec=750 True Az=135.375 Ze=-0.48 Az status=0009 Ze status=0009 07:38:14 Check angles 07:38:14 SkyScan query 07:38:15 SkyScan query done: ret=0 az=117.33<-7822 ze=20.94<-10604 Statuses=0009 0009 07:38:15 Msec=1500 True Az=117.33 Ze=20.94 Az status=0009 Ze status=0009 07:38:15 Check angles 07:38:15 SkyScan query 07:38:16 SkyScan query done: ret=0 az=99.63<-6642 ze=42.27<-9182 Statuses=0009 0009 07:38:16 Msec=2250 True Az=99.63 Ze=42.27 Az status=0009 Ze status=0009 07:38:16 Check angles 07:38:16 SkyScan query 07:38:16 SkyScan query done: ret=0 az=86.04<-5736 ze=51.555<-8563 Statuses=0009 0008 07:38:16 Msec=3000 True Az=86.04 Ze=51.555 Az status=0009 Ze status=0008 07:38:16 Check angles 07:38:16 SkyScan query 07:38:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:38:17 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:38:17 Message to Master queued w/err=0: serial=57699 error=0 07:38:22 Received message from Master: op=Filter serial=57700 07:38:22 Color wheel filter change from 0 to 0 07:38:22 FLIGetFilterPos err=0 currentPosition=0 07:38:22 FLIGetStepsRemaining err=0 RemainingSteps=0 07:38:22 Filter is already there-color wheel unchanged 07:38:22 Received message from Master: op=Shutter serial=57701 07:38:22 Shutter LASER close 07:38:22 Received message from Camera: op=State serial=57703 07:38:22 GetSingleValue result=40 Value=cccccccc 07:38:22 SkyScan query 07:38:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:38:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:23 Parameters OK 07:38:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:23 Set A/D data flow result=40 07:38:23 Set A/D channel type result=40 07:38:23 Set A/D encoding result=40 07:38:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:23 Set channel filter=0.000000e+000 result=40 07:38:23 Config A/D Result=40 07:38:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:23 Get A/D filter: -9.255963e+061 result=40 07:38:23 Get A/D value=-858993460 result=40 07:38:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:23 Parameters OK 07:38:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:23 Set A/D data flow result=40 07:38:23 Set A/D channel type result=40 07:38:23 Set A/D encoding result=40 07:38:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:23 Set channel filter=0.000000e+000 result=40 07:38:23 Config A/D Result=40 07:38:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:23 Get A/D filter: -9.255963e+061 result=40 07:38:23 Get A/D value=-858993460 result=40 07:38:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:38:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:38:23 Aux= 07:38:23 Message to Camera, serial 57703 queued 07:39:00 Received message from Master: op=PointingHead serial=57716 07:39:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:39:00 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:39:00 Point started: ret=0 07:39:00 point_skyscan result=0 07:39:01 Check angles 07:39:01 SkyScan query 07:39:01 SkyScan query done: ret=0 az=108.765<-7251 ze=38.475<-9435 Statuses=0009 0008 07:39:01 Msec=0 True Az=108.765 Ze=38.475 Az status=0009 Ze status=0008 07:39:02 Check angles 07:39:02 SkyScan query 07:39:02 SkyScan query done: ret=0 az=126.36<-8424 ze=38.505<-9433 Statuses=0009 0008 07:39:02 Msec=750 True Az=126.36 Ze=38.505 Az status=0009 Ze status=0008 07:39:02 Check angles 07:39:02 SkyScan query 07:39:03 SkyScan query done: ret=0 az=143.85<-9590 ze=38.505<-9433 Statuses=0009 0008 07:39:03 Msec=1500 True Az=143.85 Ze=38.505 Az status=0009 Ze status=0008 07:39:03 Check angles 07:39:03 SkyScan query 07:39:04 SkyScan query done: ret=0 az=161.565<-10771 ze=38.505<-9433 Statuses=0009 0008 07:39:04 Msec=2250 True Az=161.565 Ze=38.505 Az status=0009 Ze status=0008 07:39:04 Check angles 07:39:04 SkyScan query 07:39:04 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 07:39:04 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 07:39:05 Check angles 07:39:05 SkyScan query 07:39:05 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:39:05 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:39:05 Message to Master queued w/err=0: serial=57716 error=0 07:39:10 Received message from Master: op=Filter serial=57717 07:39:10 Color wheel filter change from 0 to 0 07:39:10 FLIGetFilterPos err=0 currentPosition=0 07:39:10 FLIGetStepsRemaining err=0 RemainingSteps=0 07:39:10 Filter is already there-color wheel unchanged 07:39:10 Received message from Master: op=Shutter serial=57718 07:39:10 Shutter LASER close 07:39:10 Received message from Camera: op=State serial=57720 07:39:10 GetSingleValue result=40 Value=cccccccc 07:39:10 SkyScan query 07:39:11 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:39:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:11 Parameters OK 07:39:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:11 Set A/D data flow result=40 07:39:11 Set A/D channel type result=40 07:39:11 Set A/D encoding result=40 07:39:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:11 Set channel filter=0.000000e+000 result=40 07:39:11 Config A/D Result=40 07:39:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:11 Get A/D filter: -9.255963e+061 result=40 07:39:11 Get A/D value=-858993460 result=40 07:39:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:11 Parameters OK 07:39:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:11 Set A/D data flow result=40 07:39:11 Set A/D channel type result=40 07:39:11 Set A/D encoding result=40 07:39:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:11 Set channel filter=0.000000e+000 result=40 07:39:11 Config A/D Result=40 07:39:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:11 Get A/D filter: -9.255963e+061 result=40 07:39:11 Get A/D value=-858993460 result=40 07:39:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:39:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:39:11 Aux= 07:39:11 Message to Camera, serial 57720 queued 07:39:48 Received message from Master: op=PointingHead serial=57733 07:39:48 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:39:48 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:39:48 Point started: ret=0 07:39:48 point_skyscan result=0 07:39:49 Check angles 07:39:49 SkyScan query 07:39:49 SkyScan query done: ret=0 az=152.97<-10198 ze=8.76<-11416 Statuses=0009 0009 07:39:49 Msec=0 True Az=152.97 Ze=8.76 Az status=0009 Ze status=0009 07:39:50 Check angles 07:39:50 SkyScan query 07:39:50 SkyScan query done: ret=0 az=135.255<-9017 ze=-12.63<-12842 Statuses=0009 0009 07:39:50 Msec=750 True Az=135.255 Ze=-12.63 Az status=0009 Ze status=0009 07:39:50 Check angles 07:39:50 SkyScan query 07:39:51 SkyScan query done: ret=0 az=117.555<-7837 ze=-33.615<-14241 Statuses=0009 0009 07:39:51 Msec=1500 True Az=117.555 Ze=-33.615 Az status=0009 Ze status=0009 07:39:51 Check angles 07:39:51 SkyScan query 07:39:52 SkyScan query done: ret=0 az=100.17<-6678 ze=-51.555<-15437 Statuses=0009 0009 07:39:52 Msec=2250 True Az=100.17 Ze=-51.555 Az status=0009 Ze status=0009 07:39:52 Check angles 07:39:52 SkyScan query 07:39:52 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 07:39:52 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 07:39:53 Check angles 07:39:53 SkyScan query 07:39:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:39:53 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:39:53 Message to Master queued w/err=0: serial=57733 error=0 07:39:58 Received message from Master: op=Filter serial=57734 07:39:58 Color wheel filter change from 0 to 0 07:39:58 FLIGetFilterPos err=0 currentPosition=0 07:39:58 FLIGetStepsRemaining err=0 RemainingSteps=0 07:39:58 Filter is already there-color wheel unchanged 07:39:58 Received message from Master: op=Shutter serial=57735 07:39:58 Shutter LASER close 07:39:58 Received message from Camera: op=State serial=57737 07:39:58 GetSingleValue result=40 Value=cccccccc 07:39:58 SkyScan query 07:39:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:39:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:59 Parameters OK 07:39:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:59 Set A/D data flow result=40 07:39:59 Set A/D channel type result=40 07:39:59 Set A/D encoding result=40 07:39:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:59 Set channel filter=0.000000e+000 result=40 07:39:59 Config A/D Result=40 07:39:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:59 Get A/D filter: -9.255963e+061 result=40 07:39:59 Get A/D value=-858993460 result=40 07:39:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:59 Parameters OK 07:39:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:59 Set A/D data flow result=40 07:39:59 Set A/D channel type result=40 07:39:59 Set A/D encoding result=40 07:39:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:59 Set channel filter=0.000000e+000 result=40 07:39:59 Config A/D Result=40 07:39:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:59 Get A/D filter: -9.255963e+061 result=40 07:39:59 Get A/D value=-858993460 result=40 07:39:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:39:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:39:59 Aux= 07:39:59 Message to Camera, serial 57737 queued 07:40:36 Received message from Master: op=PointingHead serial=57750 07:40:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:40:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:40:36 Point started: ret=0 07:40:36 point_skyscan result=0 07:40:37 Check angles 07:40:37 SkyScan query 07:40:38 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.36<-17424 Statuses=0009 0009 07:40:38 Msec=0 True Az=109.02 Ze=-81.36 Az status=0009 Ze status=0009 07:40:38 Check angles 07:40:38 SkyScan query 07:40:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.33<-18822 Statuses=0008 0009 07:40:38 Msec=750 True Az=112.995 Ze=-102.33 Az status=0008 Ze status=0009 07:40:38 Check angles 07:40:38 SkyScan query 07:40:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.285<-20219 Statuses=0008 0009 07:40:39 Msec=1500 True Az=112.995 Ze=-123.285 Az status=0008 Ze status=0009 07:40:39 Check angles 07:40:39 SkyScan query 07:40:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.66<-21644 Statuses=0008 0009 07:40:40 Msec=2250 True Az=112.995 Ze=-144.66 Az status=0008 Ze status=0009 07:40:40 Check angles 07:40:40 SkyScan query 07:40:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.615<-23041 Statuses=0008 0009 07:40:41 Msec=3000 True Az=112.995 Ze=-165.615 Az status=0008 Ze status=0009 07:40:41 Check angles 07:40:41 SkyScan query 07:40:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:40:41 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:40:41 Message to Master queued w/err=0: serial=57750 error=0 07:40:46 Received message from Master: op=Filter serial=57751 07:40:46 Color wheel filter change from 0 to 0 07:40:46 FLIGetFilterPos err=0 currentPosition=0 07:40:46 FLIGetStepsRemaining err=0 RemainingSteps=0 07:40:46 Filter is already there-color wheel unchanged 07:40:46 Received message from Master: op=Shutter serial=57752 07:40:46 Shutter LASER open 07:40:47 Received message from Camera: op=State serial=57754 07:40:47 GetSingleValue result=40 Value=cccccccc 07:40:47 SkyScan query 07:40:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:40:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:47 Parameters OK 07:40:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:47 Set A/D data flow result=40 07:40:47 Set A/D channel type result=40 07:40:47 Set A/D encoding result=40 07:40:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:47 Set channel filter=0.000000e+000 result=40 07:40:47 Config A/D Result=40 07:40:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:47 Get A/D filter: -9.255963e+061 result=40 07:40:47 Get A/D value=-858993460 result=40 07:40:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:47 Parameters OK 07:40:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:47 Set A/D data flow result=40 07:40:47 Set A/D channel type result=40 07:40:47 Set A/D encoding result=40 07:40:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:47 Set channel filter=0.000000e+000 result=40 07:40:47 Config A/D Result=40 07:40:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:47 Get A/D filter: -9.255963e+061 result=40 07:40:47 Get A/D value=-858993460 result=40 07:40:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:40:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:40:47 Aux= 07:40:47 Message to Camera, serial 57754 queued 07:40:56 Received message from Master: op=Shutter serial=57764 07:40:56 Shutter LASER close 07:40:56 Received message from Master: op=PointingHead serial=57768 07:40:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:40:56 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:40:56 Point started: ret=0 07:40:56 point_skyscan result=0 07:40:57 Check angles 07:40:57 SkyScan query 07:40:58 SkyScan query done: ret=0 az=90.06<-6004 ze=157.41<-1506 Statuses=0009 0009 07:40:58 Msec=0 True Az=90.06 Ze=157.41 Az status=0009 Ze status=0009 07:40:58 Check angles 07:40:58 SkyScan query 07:40:58 SkyScan query done: ret=0 az=72.57<-4838 ze=136.41<-2906 Statuses=0009 0009 07:40:58 Msec=750 True Az=72.57 Ze=136.41 Az status=0009 Ze status=0009 07:40:59 Check angles 07:40:59 SkyScan query 07:40:59 SkyScan query done: ret=0 az=54.84<-3656 ze=115.065<-4329 Statuses=0009 0009 07:40:59 Msec=1500 True Az=54.84 Ze=115.065 Az status=0009 Ze status=0009 07:40:59 Check angles 07:40:59 SkyScan query 07:41:00 SkyScan query done: ret=0 az=40.89<-2726 ze=94.05<-5730 Statuses=0009 0009 07:41:00 Msec=2250 True Az=40.89 Ze=94.05 Az status=0009 Ze status=0009 07:41:00 Check angles 07:41:00 SkyScan query 07:41:01 SkyScan query done: ret=0 az=40.995<-2733 ze=73.125<-7125 Statuses=0008 0009 07:41:01 Msec=3000 True Az=40.995 Ze=73.125 Az status=0008 Ze status=0009 07:41:01 Check angles 07:41:01 SkyScan query 07:41:02 SkyScan query done: ret=0 az=40.995<-2733 ze=52.65<-8490 Statuses=0008 0009 07:41:02 Msec=3750 True Az=40.995 Ze=52.65 Az status=0008 Ze status=0009 07:41:02 Check angles 07:41:02 SkyScan query 07:41:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:41:02 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:41:02 Message to Master queued w/err=0: serial=57768 error=0 07:41:07 Received message from Master: op=Filter serial=57769 07:41:07 Color wheel filter change from 0 to 0 07:41:07 FLIGetFilterPos err=0 currentPosition=0 07:41:07 FLIGetStepsRemaining err=0 RemainingSteps=0 07:41:07 Filter is already there-color wheel unchanged 07:41:07 Received message from Master: op=Shutter serial=57770 07:41:07 Shutter LASER close 07:41:08 Received message from Camera: op=State serial=57772 07:41:08 GetSingleValue result=40 Value=cccccccc 07:41:08 SkyScan query 07:41:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:41:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:08 Parameters OK 07:41:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:08 Set A/D data flow result=40 07:41:08 Set A/D channel type result=40 07:41:08 Set A/D encoding result=40 07:41:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:08 Set channel filter=0.000000e+000 result=40 07:41:08 Config A/D Result=40 07:41:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:08 Get A/D filter: -9.255963e+061 result=40 07:41:08 Get A/D value=-858993460 result=40 07:41:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:08 Parameters OK 07:41:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:08 Set A/D data flow result=40 07:41:08 Set A/D channel type result=40 07:41:08 Set A/D encoding result=40 07:41:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:08 Set channel filter=0.000000e+000 result=40 07:41:08 Config A/D Result=40 07:41:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:08 Get A/D filter: -9.255963e+061 result=40 07:41:08 Get A/D value=-858993460 result=40 07:41:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:41:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:41:08 Aux= 07:41:08 Message to Camera, serial 57772 queued 07:41:45 Received message from Master: op=PointingHead serial=57785 07:41:45 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:41:45 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:41:45 Point started: ret=0 07:41:45 point_skyscan result=0 07:41:46 Check angles 07:41:46 SkyScan query 07:41:47 SkyScan query done: ret=0 az=64.275<-4285 ze=66.54<-7564 Statuses=0009 0008 07:41:47 Msec=0 True Az=64.275 Ze=66.54 Az status=0009 Ze status=0008 07:41:47 Check angles 07:41:47 SkyScan query 07:41:47 SkyScan query done: ret=0 az=82.02<-5468 ze=66.495<-7567 Statuses=0009 0008 07:41:47 Msec=750 True Az=82.02 Ze=66.495 Az status=0009 Ze status=0008 07:41:48 Check angles 07:41:48 SkyScan query 07:41:48 SkyScan query done: ret=0 az=99.66<-6644 ze=66.495<-7567 Statuses=0009 0008 07:41:48 Msec=1500 True Az=99.66 Ze=66.495 Az status=0009 Ze status=0008 07:41:48 Check angles 07:41:48 SkyScan query 07:41:49 SkyScan query done: ret=0 az=117.135<-7809 ze=66.495<-7567 Statuses=0009 0008 07:41:49 Msec=2250 True Az=117.135 Ze=66.495 Az status=0009 Ze status=0008 07:41:49 Check angles 07:41:49 SkyScan query 07:41:50 SkyScan query done: ret=0 az=134.805<-8987 ze=66.495<-7567 Statuses=0009 0008 07:41:50 Msec=3000 True Az=134.805 Ze=66.495 Az status=0009 Ze status=0008 07:41:50 Check angles 07:41:50 SkyScan query 07:41:51 SkyScan query done: ret=0 az=152.7<-10180 ze=66.495<-7567 Statuses=0009 0008 07:41:51 Msec=3750 True Az=152.7 Ze=66.495 Az status=0009 Ze status=0008 07:41:51 Check angles 07:41:51 SkyScan query 07:41:51 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:41:51 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 07:41:51 Message to Master queued w/err=0: serial=57785 error=0 07:41:56 Received message from Master: op=Filter serial=57786 07:41:56 Color wheel filter change from 0 to 0 07:41:56 FLIGetFilterPos err=0 currentPosition=0 07:41:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:41:56 Filter is already there-color wheel unchanged 07:41:56 Received message from Master: op=Shutter serial=57787 07:41:56 Shutter LASER close 07:41:56 Received message from Camera: op=State serial=57789 07:41:56 GetSingleValue result=40 Value=cccccccc 07:41:56 SkyScan query 07:41:57 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:41:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:57 Parameters OK 07:41:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:57 Set A/D data flow result=40 07:41:57 Set A/D channel type result=40 07:41:57 Set A/D encoding result=40 07:41:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:57 Set channel filter=0.000000e+000 result=40 07:41:57 Config A/D Result=40 07:41:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:57 Get A/D filter: -9.255963e+061 result=40 07:41:57 Get A/D value=-858993460 result=40 07:41:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:57 Parameters OK 07:41:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:57 Set A/D data flow result=40 07:41:57 Set A/D channel type result=40 07:41:57 Set A/D encoding result=40 07:41:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:57 Set channel filter=0.000000e+000 result=40 07:41:57 Config A/D Result=40 07:41:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:57 Get A/D filter: -9.255963e+061 result=40 07:41:57 Get A/D value=-858993460 result=40 07:41:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:57 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:41:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:41:57 Aux= 07:41:57 Message to Camera, serial 57789 queued 07:42:34 Received message from Master: op=PointingHead serial=57802 07:42:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:42:34 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:42:34 Point started: ret=0 07:42:34 point_skyscan result=0 07:42:35 Check angles 07:42:35 SkyScan query 07:42:36 SkyScan query done: ret=0 az=135.12<-9008 ze=36.78<-9548 Statuses=0009 0009 07:42:36 Msec=0 True Az=135.12 Ze=36.78 Az status=0009 Ze status=0009 07:42:36 Check angles 07:42:36 SkyScan query 07:42:36 SkyScan query done: ret=0 az=117.54<-7836 ze=15.87<-10942 Statuses=0009 0009 07:42:36 Msec=750 True Az=117.54 Ze=15.87 Az status=0009 Ze status=0009 07:42:36 Check angles 07:42:36 SkyScan query 07:42:37 SkyScan query done: ret=0 az=100.245<-6683 ze=-5.145<-12343 Statuses=0009 0009 07:42:37 Msec=1500 True Az=100.245 Ze=-5.145 Az status=0009 Ze status=0009 07:42:37 Check angles 07:42:37 SkyScan query 07:42:38 SkyScan query done: ret=0 az=82.68<-5512 ze=-26.07<-13738 Statuses=0009 0009 07:42:38 Msec=2250 True Az=82.68 Ze=-26.07 Az status=0009 Ze status=0009 07:42:38 Check angles 07:42:38 SkyScan query 07:42:39 SkyScan query done: ret=0 az=65.19<-4346 ze=-38.565<-14571 Statuses=0009 0008 07:42:39 Msec=3000 True Az=65.19 Ze=-38.565 Az status=0009 Ze status=0008 07:42:39 Check angles 07:42:39 SkyScan query 07:42:39 SkyScan query done: ret=0 az=47.745<-3183 ze=-38.535<-14569 Statuses=0009 0008 07:42:39 Msec=3750 True Az=47.745 Ze=-38.535 Az status=0009 Ze status=0008 07:42:39 Check angles 07:42:39 SkyScan query 07:42:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:42:40 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:42:40 Message to Master queued w/err=0: serial=57802 error=0 07:42:45 Received message from Master: op=Filter serial=57803 07:42:45 Color wheel filter change from 0 to 0 07:42:45 FLIGetFilterPos err=0 currentPosition=0 07:42:45 FLIGetStepsRemaining err=0 RemainingSteps=0 07:42:45 Filter is already there-color wheel unchanged 07:42:45 Received message from Master: op=Shutter serial=57804 07:42:45 Shutter LASER close 07:42:45 Received message from Camera: op=State serial=57806 07:42:45 GetSingleValue result=40 Value=cccccccc 07:42:45 SkyScan query 07:42:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:42:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:46 Parameters OK 07:42:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:46 Set A/D data flow result=40 07:42:46 Set A/D channel type result=40 07:42:46 Set A/D encoding result=40 07:42:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:46 Set channel filter=0.000000e+000 result=40 07:42:46 Config A/D Result=40 07:42:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:46 Get A/D filter: -9.255963e+061 result=40 07:42:46 Get A/D value=-858993460 result=40 07:42:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:46 Parameters OK 07:42:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:46 Set A/D data flow result=40 07:42:46 Set A/D channel type result=40 07:42:46 Set A/D encoding result=40 07:42:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:46 Set channel filter=0.000000e+000 result=40 07:42:46 Config A/D Result=40 07:42:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:46 Get A/D filter: -9.255963e+061 result=40 07:42:46 Get A/D value=-858993460 result=40 07:42:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:42:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:42:46 Aux= 07:42:46 Message to Camera, serial 57806 queued 07:43:23 Received message from Master: op=PointingHead serial=57819 07:43:23 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:43:23 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:43:23 Point started: ret=0 07:43:23 point_skyscan result=0 07:43:24 Check angles 07:43:24 SkyScan query 07:43:24 SkyScan query done: ret=0 az=64.41<-4294 ze=-68.76<-16584 Statuses=0009 0009 07:43:24 Msec=0 True Az=64.41 Ze=-68.76 Az status=0009 Ze status=0009 07:43:25 Check angles 07:43:25 SkyScan query 07:43:25 SkyScan query done: ret=0 az=82.125<-5475 ze=-90.135<-18009 Statuses=0009 0009 07:43:25 Msec=750 True Az=82.125 Ze=-90.135 Az status=0009 Ze status=0009 07:43:25 Check angles 07:43:25 SkyScan query 07:43:26 SkyScan query done: ret=0 az=99.735<-6649 ze=-111.09<-19406 Statuses=0009 0009 07:43:26 Msec=1500 True Az=99.735 Ze=-111.09 Az status=0009 Ze status=0009 07:43:26 Check angles 07:43:26 SkyScan query 07:43:27 SkyScan query done: ret=0 az=117.165<-7811 ze=-132.015<-20801 Statuses=0009 0009 07:43:27 Msec=2250 True Az=117.165 Ze=-132.015 Az status=0009 Ze status=0009 07:43:27 Check angles 07:43:27 SkyScan query 07:43:27 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 07:43:27 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 07:43:28 Check angles 07:43:28 SkyScan query 07:43:28 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:43:28 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:43:28 Message to Master queued w/err=0: serial=57819 error=0 07:43:33 Received message from Master: op=Filter serial=57820 07:43:33 Color wheel filter change from 0 to 0 07:43:33 FLIGetFilterPos err=0 currentPosition=0 07:43:33 FLIGetStepsRemaining err=0 RemainingSteps=0 07:43:33 Filter is already there-color wheel unchanged 07:43:33 Received message from Master: op=Shutter serial=57821 07:43:33 Shutter LASER close 07:43:33 Received message from Camera: op=State serial=57823 07:43:33 GetSingleValue result=40 Value=cccccccc 07:43:33 SkyScan query 07:43:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:43:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:34 Parameters OK 07:43:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:34 Set A/D data flow result=40 07:43:34 Set A/D channel type result=40 07:43:34 Set A/D encoding result=40 07:43:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:34 Set channel filter=0.000000e+000 result=40 07:43:34 Config A/D Result=40 07:43:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:34 Get A/D filter: -9.255963e+061 result=40 07:43:34 Get A/D value=-858993460 result=40 07:43:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:34 Parameters OK 07:43:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:34 Set A/D data flow result=40 07:43:34 Set A/D channel type result=40 07:43:34 Set A/D encoding result=40 07:43:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:34 Set channel filter=0.000000e+000 result=40 07:43:34 Config A/D Result=40 07:43:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:34 Get A/D filter: -9.255963e+061 result=40 07:43:34 Get A/D value=-858993460 result=40 07:43:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:34 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:43:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:43:34 Aux= 07:43:34 Message to Camera, serial 57823 queued 07:44:11 Received message from Master: op=PointingHead serial=57836 07:44:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:44:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:44:11 Point started: ret=0 07:44:11 point_skyscan result=0 07:44:12 Check angles 07:44:12 SkyScan query 07:44:13 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.105<-23407 Statuses=0009 0009 07:44:13 Msec=0 True Az=113.01 Ze=-171.105 Az status=0009 Ze status=0009 07:44:13 Check angles 07:44:13 SkyScan query 07:44:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:44:13 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:44:13 Message to Master queued w/err=0: serial=57836 error=0 07:44:18 Received message from Master: op=Filter serial=57837 07:44:18 Color wheel filter change from 0 to 0 07:44:18 FLIGetFilterPos err=0 currentPosition=0 07:44:18 FLIGetStepsRemaining err=0 RemainingSteps=0 07:44:18 Filter is already there-color wheel unchanged 07:44:18 Received message from Master: op=Shutter serial=57838 07:44:18 Shutter LASER open 07:44:19 Received message from Camera: op=State serial=57840 07:44:19 GetSingleValue result=40 Value=cccccccc 07:44:19 SkyScan query 07:44:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:44:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:19 Parameters OK 07:44:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:19 Set A/D data flow result=40 07:44:19 Set A/D channel type result=40 07:44:19 Set A/D encoding result=40 07:44:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:19 Set channel filter=0.000000e+000 result=40 07:44:19 Config A/D Result=40 07:44:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:19 Get A/D filter: -9.255963e+061 result=40 07:44:19 Get A/D value=-858993460 result=40 07:44:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:19 Parameters OK 07:44:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:19 Set A/D data flow result=40 07:44:19 Set A/D channel type result=40 07:44:19 Set A/D encoding result=40 07:44:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:19 Set channel filter=0.000000e+000 result=40 07:44:19 Config A/D Result=40 07:44:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:19 Get A/D filter: -9.255963e+061 result=40 07:44:19 Get A/D value=-858993460 result=40 07:44:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:44:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:44:19 Aux= 07:44:19 Message to Camera, serial 57840 queued 07:44:28 Received message from Master: op=Shutter serial=57850 07:44:28 Shutter LASER close 07:44:28 Received message from Master: op=PointingHead serial=57854 07:44:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:44:28 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:44:29 Point started: ret=0 07:44:29 point_skyscan result=0 07:44:29 Check angles 07:44:29 SkyScan query 07:44:30 SkyScan query done: ret=0 az=136.08<-9072 ze=-143.16<-21544 Statuses=0009 0009 07:44:30 Msec=0 True Az=136.08 Ze=-143.16 Az status=0009 Ze status=0009 07:44:30 Check angles 07:44:30 SkyScan query 07:44:31 SkyScan query done: ret=0 az=153.645<-10243 ze=-122.205<-20147 Statuses=0009 0009 07:44:31 Msec=750 True Az=153.645 Ze=-122.205 Az status=0009 Ze status=0009 07:44:31 Check angles 07:44:31 SkyScan query 07:44:31 SkyScan query done: ret=0 az=171.06<-11404 ze=-101.325<-18755 Statuses=0009 0009 07:44:31 Msec=1500 True Az=171.06 Ze=-101.325 Az status=0009 Ze status=0009 07:44:32 Check angles 07:44:32 SkyScan query 07:44:32 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.295<-17353 Statuses=0008 0009 07:44:32 Msec=2250 True Az=176.025 Ze=-80.295 Az status=0008 Ze status=0009 07:44:32 Check angles 07:44:32 SkyScan query 07:44:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.37<-15958 Statuses=0008 0009 07:44:33 Msec=3000 True Az=175.995 Ze=-59.37 Az status=0008 Ze status=0009 07:44:33 Check angles 07:44:33 SkyScan query 07:44:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 07:44:34 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 07:44:34 Message to Master queued w/err=0: serial=57854 error=0 07:44:39 Received message from Master: op=Filter serial=57855 07:44:39 Color wheel filter change from 0 to 0 07:44:39 FLIGetFilterPos err=0 currentPosition=0 07:44:39 FLIGetStepsRemaining err=0 RemainingSteps=0 07:44:39 Filter is already there-color wheel unchanged 07:44:39 Received message from Master: op=Shutter serial=57856 07:44:39 Shutter LASER close 07:44:39 Received message from Camera: op=State serial=57858 07:44:39 GetSingleValue result=40 Value=cccccccc 07:44:39 SkyScan query 07:44:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:44:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:40 Parameters OK 07:44:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:40 Set A/D data flow result=40 07:44:40 Set A/D channel type result=40 07:44:40 Set A/D encoding result=40 07:44:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:40 Set channel filter=0.000000e+000 result=40 07:44:40 Config A/D Result=40 07:44:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:40 Get A/D filter: -9.255963e+061 result=40 07:44:40 Get A/D value=-858993460 result=40 07:44:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:40 Parameters OK 07:44:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:40 Set A/D data flow result=40 07:44:40 Set A/D channel type result=40 07:44:40 Set A/D encoding result=40 07:44:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:40 Set channel filter=0.000000e+000 result=40 07:44:40 Config A/D Result=40 07:44:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:40 Get A/D filter: -9.255963e+061 result=40 07:44:40 Get A/D value=-858993460 result=40 07:44:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:44:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:44:40 Aux= 07:44:40 Message to Camera, serial 57858 queued 07:45:16 Received message from Master: op=PointingHead serial=57871 07:45:16 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:45:16 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:45:17 Point started: ret=0 07:45:17 point_skyscan result=0 07:45:18 Check angles 07:45:18 SkyScan query 07:45:18 SkyScan query done: ret=0 az=152.79<-10186 ze=-21.495<-13433 Statuses=0009 0009 07:45:18 Msec=0 True Az=152.79 Ze=-21.495 Az status=0009 Ze status=0009 07:45:18 Check angles 07:45:18 SkyScan query 07:45:19 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.54<-12036 Statuses=0009 0009 07:45:19 Msec=750 True Az=135.45 Ze=-0.54 Az status=0009 Ze status=0009 07:45:19 Check angles 07:45:19 SkyScan query 07:45:20 SkyScan query done: ret=0 az=117.78<-7852 ze=20.52<-10632 Statuses=0009 0009 07:45:20 Msec=1500 True Az=117.78 Ze=20.52 Az status=0009 Ze status=0009 07:45:20 Check angles 07:45:20 SkyScan query 07:45:20 SkyScan query done: ret=0 az=100.305<-6687 ze=41.385<-9241 Statuses=0009 0009 07:45:20 Msec=2250 True Az=100.305 Ze=41.385 Az status=0009 Ze status=0009 07:45:21 Check angles 07:45:21 SkyScan query 07:45:21 SkyScan query done: ret=0 az=86.04<-5736 ze=51.555<-8563 Statuses=0009 0008 07:45:21 Msec=3000 True Az=86.04 Ze=51.555 Az status=0009 Ze status=0008 07:45:21 Check angles 07:45:21 SkyScan query 07:45:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:45:22 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:45:22 Message to Master queued w/err=0: serial=57871 error=0 07:45:27 Received message from Master: op=Filter serial=57872 07:45:27 Color wheel filter change from 0 to 0 07:45:27 FLIGetFilterPos err=0 currentPosition=0 07:45:27 FLIGetStepsRemaining err=0 RemainingSteps=0 07:45:27 Filter is already there-color wheel unchanged 07:45:27 Received message from Master: op=Shutter serial=57873 07:45:27 Shutter LASER close 07:45:27 Received message from Camera: op=State serial=57875 07:45:27 GetSingleValue result=40 Value=cccccccc 07:45:27 SkyScan query 07:45:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:45:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:28 Parameters OK 07:45:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:28 Set A/D data flow result=40 07:45:28 Set A/D channel type result=40 07:45:28 Set A/D encoding result=40 07:45:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:28 Set channel filter=0.000000e+000 result=40 07:45:28 Config A/D Result=40 07:45:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:28 Get A/D filter: -9.255963e+061 result=40 07:45:28 Get A/D value=-858993460 result=40 07:45:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:28 Parameters OK 07:45:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:28 Set A/D data flow result=40 07:45:28 Set A/D channel type result=40 07:45:28 Set A/D encoding result=40 07:45:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:28 Set channel filter=0.000000e+000 result=40 07:45:28 Config A/D Result=40 07:45:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:28 Get A/D filter: -9.255963e+061 result=40 07:45:28 Get A/D value=-858993460 result=40 07:45:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:45:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:45:28 Aux= 07:45:28 Message to Camera, serial 57875 queued 07:45:29 Received message from Master: op=Identify serial=57876 07:46:04 Received message from Master: op=PointingHead serial=57891 07:46:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:46:04 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:46:05 Point started: ret=0 07:46:05 point_skyscan result=0 07:46:06 Check angles 07:46:06 SkyScan query 07:46:06 SkyScan query done: ret=0 az=109.2<-7280 ze=38.49<-9434 Statuses=0009 0008 07:46:06 Msec=0 True Az=109.2 Ze=38.49 Az status=0009 Ze status=0008 07:46:06 Check angles 07:46:06 SkyScan query 07:46:07 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 07:46:07 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 07:46:07 Check angles 07:46:07 SkyScan query 07:46:08 SkyScan query done: ret=0 az=144.09<-9606 ze=38.505<-9433 Statuses=0009 0008 07:46:08 Msec=1500 True Az=144.09 Ze=38.505 Az status=0009 Ze status=0008 07:46:08 Check angles [UTC 2018-12-11 07:46:08] 07:46:08 SkyScan query 07:46:08 SkyScan query done: ret=0 az=163.035<-10869 ze=38.505<-9433 Statuses=0009 0008 07:46:08 Msec=2250 True Az=163.035 Ze=38.505 Az status=0009 Ze status=0008 07:46:09 Check angles 07:46:09 SkyScan query 07:46:09 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 07:46:09 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 07:46:09 Check angles 07:46:09 SkyScan query 07:46:10 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:46:10 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:46:10 Message to Master queued w/err=0: serial=57891 error=0 07:46:15 Received message from Master: op=Filter serial=57892 07:46:15 Color wheel filter change from 0 to 0 07:46:15 FLIGetFilterPos err=0 currentPosition=0 07:46:15 FLIGetStepsRemaining err=0 RemainingSteps=0 07:46:15 Filter is already there-color wheel unchanged 07:46:15 Received message from Master: op=Shutter serial=57893 07:46:15 Shutter LASER close 07:46:15 Received message from Camera: op=State serial=57895 07:46:15 GetSingleValue result=40 Value=cccccccc 07:46:15 SkyScan query 07:46:16 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:46:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:16 Parameters OK 07:46:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:16 Set A/D data flow result=40 07:46:16 Set A/D channel type result=40 07:46:16 Set A/D encoding result=40 07:46:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:16 Set channel filter=0.000000e+000 result=40 07:46:16 Config A/D Result=40 07:46:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:16 Get A/D filter: -9.255963e+061 result=40 07:46:16 Get A/D value=-858993460 result=40 07:46:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:16 Parameters OK 07:46:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:16 Set A/D data flow result=40 07:46:16 Set A/D channel type result=40 07:46:16 Set A/D encoding result=40 07:46:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:16 Set channel filter=0.000000e+000 result=40 07:46:16 Config A/D Result=40 07:46:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:16 Get A/D filter: -9.255963e+061 result=40 07:46:16 Get A/D value=-858993460 result=40 07:46:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:46:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:46:16 Aux= 07:46:16 Message to Camera, serial 57895 queued 07:46:53 Received message from Master: op=PointingHead serial=57908 07:46:53 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:46:53 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:46:53 Point started: ret=0 07:46:53 point_skyscan result=0 07:46:54 Check angles 07:46:54 SkyScan query 07:46:54 SkyScan query done: ret=0 az=152.685<-10179 ze=8.22<-11452 Statuses=0009 0009 07:46:54 Msec=0 True Az=152.685 Ze=8.22 Az status=0009 Ze status=0009 07:46:54 Check angles 07:46:54 SkyScan query 07:46:55 SkyScan query done: ret=0 az=135.27<-9018 ze=-12.69<-12846 Statuses=0009 0009 07:46:55 Msec=750 True Az=135.27 Ze=-12.69 Az status=0009 Ze status=0009 07:46:55 Check angles 07:46:55 SkyScan query 07:46:56 SkyScan query done: ret=0 az=117.225<-7815 ze=-34.125<-14275 Statuses=0009 0009 07:46:56 Msec=1500 True Az=117.225 Ze=-34.125 Az status=0009 Ze status=0009 07:46:56 Check angles 07:46:56 SkyScan query 07:46:57 SkyScan query done: ret=0 az=99.93<-6662 ze=-51.57<-15438 Statuses=0009 0009 07:46:57 Msec=2250 True Az=99.93 Ze=-51.57 Az status=0009 Ze status=0009 07:46:57 Check angles 07:46:57 SkyScan query 07:46:57 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.525<-15435 Statuses=0009 0008 07:46:57 Msec=3000 True Az=86.055 Ze=-51.525 Az status=0009 Ze status=0008 07:46:57 Check angles 07:46:57 SkyScan query 07:46:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:46:58 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:46:58 Message to Master queued w/err=0: serial=57908 error=0 07:47:03 Received message from Master: op=Filter serial=57909 07:47:03 Color wheel filter change from 0 to 0 07:47:03 FLIGetFilterPos err=0 currentPosition=0 07:47:03 FLIGetStepsRemaining err=0 RemainingSteps=0 07:47:03 Filter is already there-color wheel unchanged 07:47:03 Received message from Master: op=Shutter serial=57910 07:47:03 Shutter LASER close 07:47:03 Received message from Camera: op=State serial=57912 07:47:03 GetSingleValue result=40 Value=cccccccc 07:47:03 SkyScan query 07:47:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:47:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:04 Parameters OK 07:47:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:04 Set A/D data flow result=40 07:47:04 Set A/D channel type result=40 07:47:04 Set A/D encoding result=40 07:47:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:04 Set channel filter=0.000000e+000 result=40 07:47:04 Config A/D Result=40 07:47:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:04 Get A/D filter: -9.255963e+061 result=40 07:47:04 Get A/D value=-858993460 result=40 07:47:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:04 Parameters OK 07:47:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:04 Set A/D data flow result=40 07:47:04 Set A/D channel type result=40 07:47:04 Set A/D encoding result=40 07:47:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:04 Set channel filter=0.000000e+000 result=40 07:47:04 Config A/D Result=40 07:47:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:04 Get A/D filter: -9.255963e+061 result=40 07:47:04 Get A/D value=-858993460 result=40 07:47:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:04 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:47:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:47:04 Aux= 07:47:04 Message to Camera, serial 57912 queued 07:47:41 Received message from Master: op=PointingHead serial=57925 07:47:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:47:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:47:41 Point started: ret=0 07:47:41 point_skyscan result=0 07:47:42 Check angles 07:47:42 SkyScan query 07:47:42 SkyScan query done: ret=0 az=108.78<-7252 ze=-81.045<-17403 Statuses=0009 0009 07:47:42 Msec=0 True Az=108.78 Ze=-81.045 Az status=0009 Ze status=0009 07:47:42 Check angles 07:47:42 SkyScan query 07:47:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.045<-18803 Statuses=0008 0009 07:47:43 Msec=750 True Az=112.995 Ze=-102.045 Az status=0008 Ze status=0009 07:47:43 Check angles 07:47:43 SkyScan query 07:47:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.97<-20198 Statuses=0008 0009 07:47:44 Msec=1500 True Az=112.995 Ze=-122.97 Az status=0008 Ze status=0009 07:47:44 Check angles 07:47:44 SkyScan query 07:47:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.94<-21596 Statuses=0008 0009 07:47:45 Msec=2250 True Az=112.995 Ze=-143.94 Az status=0008 Ze status=0009 07:47:45 Check angles 07:47:45 SkyScan query 07:47:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.895<-22993 Statuses=0008 0009 07:47:45 Msec=3000 True Az=112.995 Ze=-164.895 Az status=0008 Ze status=0009 07:47:45 Check angles 07:47:45 SkyScan query 07:47:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 07:47:46 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 07:47:46 Message to Master queued w/err=0: serial=57925 error=0 07:47:51 Received message from Master: op=Filter serial=57926 07:47:51 Color wheel filter change from 0 to 0 07:47:51 FLIGetFilterPos err=0 currentPosition=0 07:47:51 FLIGetStepsRemaining err=0 RemainingSteps=0 07:47:51 Filter is already there-color wheel unchanged 07:47:51 Received message from Master: op=Shutter serial=57927 07:47:51 Shutter LASER open 07:47:51 Received message from Camera: op=State serial=57929 07:47:51 GetSingleValue result=40 Value=cccccccc 07:47:51 SkyScan query 07:47:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:47:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:52 Parameters OK 07:47:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:52 Set A/D data flow result=40 07:47:52 Set A/D channel type result=40 07:47:52 Set A/D encoding result=40 07:47:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:52 Set channel filter=0.000000e+000 result=40 07:47:52 Config A/D Result=40 07:47:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:52 Get A/D filter: -9.255963e+061 result=40 07:47:52 Get A/D value=-858993460 result=40 07:47:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:52 Parameters OK 07:47:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:52 Set A/D data flow result=40 07:47:52 Set A/D channel type result=40 07:47:52 Set A/D encoding result=40 07:47:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:52 Set channel filter=0.000000e+000 result=40 07:47:52 Config A/D Result=40 07:47:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:52 Get A/D filter: -9.255963e+061 result=40 07:47:52 Get A/D value=-858993460 result=40 07:47:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:47:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:47:52 Aux= 07:47:52 Message to Camera, serial 57929 queued 07:48:00 Received message from Master: op=Shutter serial=57939 07:48:00 Shutter LASER close 07:48:01 Received message from Master: op=PointingHead serial=57943 07:48:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:48:01 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:48:01 Point started: ret=0 07:48:01 point_skyscan result=0 07:48:02 Check angles 07:48:02 SkyScan query 07:48:02 SkyScan query done: ret=0 az=90.18<-6012 ze=157.5<-1500 Statuses=0009 0009 07:48:02 Msec=0 True Az=90.18 Ze=157.5 Az status=0009 Ze status=0009 07:48:03 Check angles 07:48:03 SkyScan query 07:48:03 SkyScan query done: ret=0 az=72.735<-4849 ze=136.515<-2899 Statuses=0009 0009 07:48:03 Msec=750 True Az=72.735 Ze=136.515 Az status=0009 Ze status=0009 07:48:03 Check angles 07:48:03 SkyScan query 07:48:04 SkyScan query done: ret=0 az=55.2<-3680 ze=115.62<-4292 Statuses=0009 0009 07:48:04 Msec=1500 True Az=55.2 Ze=115.62 Az status=0009 Ze status=0009 07:48:04 Check angles 07:48:04 SkyScan query 07:48:05 SkyScan query done: ret=0 az=40.875<-2725 ze=94.605<-5693 Statuses=0009 0009 07:48:05 Msec=2250 True Az=40.875 Ze=94.605 Az status=0009 Ze status=0009 07:48:05 Check angles 07:48:05 SkyScan query 07:48:05 SkyScan query done: ret=0 az=40.995<-2733 ze=73.23<-7118 Statuses=0008 0009 07:48:05 Msec=3000 True Az=40.995 Ze=73.23 Az status=0008 Ze status=0009 07:48:06 Check angles 07:48:06 SkyScan query 07:48:06 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 07:48:06 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 07:48:06 Check angles 07:48:06 SkyScan query 07:48:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:48:07 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:48:07 Message to Master queued w/err=0: serial=57943 error=0 07:48:12 Received message from Master: op=Filter serial=57944 07:48:12 Color wheel filter change from 0 to 0 07:48:12 FLIGetFilterPos err=0 currentPosition=0 07:48:12 FLIGetStepsRemaining err=0 RemainingSteps=0 07:48:12 Filter is already there-color wheel unchanged 07:48:12 Received message from Master: op=Shutter serial=57945 07:48:12 Shutter LASER close 07:48:12 Received message from Camera: op=State serial=57947 07:48:12 GetSingleValue result=40 Value=cccccccc 07:48:12 SkyScan query 07:48:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:48:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:13 Parameters OK 07:48:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:13 Set A/D data flow result=40 07:48:13 Set A/D channel type result=40 07:48:13 Set A/D encoding result=40 07:48:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:13 Set channel filter=0.000000e+000 result=40 07:48:13 Config A/D Result=40 07:48:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:13 Get A/D filter: -9.255963e+061 result=40 07:48:13 Get A/D value=-858993460 result=40 07:48:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:13 Parameters OK 07:48:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:13 Set A/D data flow result=40 07:48:13 Set A/D channel type result=40 07:48:13 Set A/D encoding result=40 07:48:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:13 Set channel filter=0.000000e+000 result=40 07:48:13 Config A/D Result=40 07:48:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:13 Get A/D filter: -9.255963e+061 result=40 07:48:13 Get A/D value=-858993460 result=40 07:48:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:48:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:48:13 Aux= 07:48:13 Message to Camera, serial 57947 queued 07:48:50 Received message from Master: op=PointingHead serial=57960 07:48:50 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:48:50 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:48:50 Point started: ret=0 07:48:50 point_skyscan result=0 07:48:51 Check angles 07:48:51 SkyScan query 07:48:52 SkyScan query done: ret=0 az=64.08<-4272 ze=66.555<-7563 Statuses=0009 0008 07:48:52 Msec=0 True Az=64.08 Ze=66.555 Az status=0009 Ze status=0008 07:48:52 Check angles 07:48:52 SkyScan query 07:48:52 SkyScan query done: ret=0 az=81.51<-5434 ze=66.495<-7567 Statuses=0009 0008 07:48:52 Msec=750 True Az=81.51 Ze=66.495 Az status=0009 Ze status=0008 07:48:52 Check angles 07:48:52 SkyScan query 07:48:53 SkyScan query done: ret=0 az=99.42<-6628 ze=66.495<-7567 Statuses=0009 0008 07:48:53 Msec=1500 True Az=99.42 Ze=66.495 Az status=0009 Ze status=0008 07:48:53 Check angles 07:48:53 SkyScan query 07:48:54 SkyScan query done: ret=0 az=117<-7800 ze=66.495<-7567 Statuses=0009 0008 07:48:54 Msec=2250 True Az=117 Ze=66.495 Az status=0009 Ze status=0008 07:48:54 Check angles 07:48:54 SkyScan query 07:48:55 SkyScan query done: ret=0 az=134.385<-8959 ze=66.495<-7567 Statuses=0009 0008 07:48:55 Msec=3000 True Az=134.385 Ze=66.495 Az status=0009 Ze status=0008 07:48:55 Check angles 07:48:55 SkyScan query 07:48:55 SkyScan query done: ret=0 az=152.265<-10151 ze=66.495<-7567 Statuses=0009 0008 07:48:55 Msec=3750 True Az=152.265 Ze=66.495 Az status=0009 Ze status=0008 07:48:55 Check angles 07:48:55 SkyScan query 07:48:56 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:48:56 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 07:48:56 Message to Master queued w/err=0: serial=57960 error=0 07:49:01 Received message from Master: op=Filter serial=57961 07:49:01 Color wheel filter change from 0 to 0 07:49:01 FLIGetFilterPos err=0 currentPosition=0 07:49:01 FLIGetStepsRemaining err=0 RemainingSteps=0 07:49:01 Filter is already there-color wheel unchanged 07:49:01 Received message from Master: op=Shutter serial=57962 07:49:01 Shutter LASER close 07:49:01 Received message from Camera: op=State serial=57964 07:49:01 GetSingleValue result=40 Value=cccccccc 07:49:01 SkyScan query 07:49:02 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:49:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:02 Parameters OK 07:49:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:02 Set A/D data flow result=40 07:49:02 Set A/D channel type result=40 07:49:02 Set A/D encoding result=40 07:49:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:02 Set channel filter=0.000000e+000 result=40 07:49:02 Config A/D Result=40 07:49:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:02 Get A/D filter: -9.255963e+061 result=40 07:49:02 Get A/D value=-858993460 result=40 07:49:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:02 Parameters OK 07:49:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:02 Set A/D data flow result=40 07:49:02 Set A/D channel type result=40 07:49:02 Set A/D encoding result=40 07:49:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:02 Set channel filter=0.000000e+000 result=40 07:49:02 Config A/D Result=40 07:49:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:02 Get A/D filter: -9.255963e+061 result=40 07:49:02 Get A/D value=-858993460 result=40 07:49:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:02 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:49:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:49:02 Aux= 07:49:02 Message to Camera, serial 57964 queued 07:49:39 Received message from Master: op=PointingHead serial=57977 07:49:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:49:39 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:49:39 Point started: ret=0 07:49:39 point_skyscan result=0 07:49:40 Check angles 07:49:40 SkyScan query 07:49:40 SkyScan query done: ret=0 az=135.03<-9002 ze=36.795<-9547 Statuses=0009 0009 07:49:40 Msec=0 True Az=135.03 Ze=36.795 Az status=0009 Ze status=0009 07:49:41 Check angles 07:49:41 SkyScan query 07:49:41 SkyScan query done: ret=0 az=117.045<-7803 ze=15.48<-10968 Statuses=0009 0009 07:49:41 Msec=750 True Az=117.045 Ze=15.48 Az status=0009 Ze status=0009 07:49:41 Check angles 07:49:41 SkyScan query 07:49:42 SkyScan query done: ret=0 az=99.375<-6625 ze=-5.955<-12397 Statuses=0009 0009 07:49:42 Msec=1500 True Az=99.375 Ze=-5.955 Az status=0009 Ze status=0009 07:49:42 Check angles 07:49:42 SkyScan query 07:49:43 SkyScan query done: ret=0 az=81.96<-5464 ze=-26.985<-13799 Statuses=0009 0009 07:49:43 Msec=2250 True Az=81.96 Ze=-26.985 Az status=0009 Ze status=0009 07:49:43 Check angles 07:49:43 SkyScan query 07:49:43 SkyScan query done: ret=0 az=64.41<-4294 ze=-38.58<-14572 Statuses=0009 0008 07:49:43 Msec=3000 True Az=64.41 Ze=-38.58 Az status=0009 Ze status=0008 07:49:44 Check angles 07:49:44 SkyScan query 07:49:44 SkyScan query done: ret=0 az=46.65<-3110 ze=-38.52<-14568 Statuses=0009 0008 07:49:44 Msec=3750 True Az=46.65 Ze=-38.52 Az status=0009 Ze status=0008 07:49:44 Check angles 07:49:44 SkyScan query 07:49:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:49:45 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:49:45 Message to Master queued w/err=0: serial=57977 error=0 07:49:50 Received message from Master: op=Filter serial=57978 07:49:50 Color wheel filter change from 0 to 0 07:49:50 FLIGetFilterPos err=0 currentPosition=0 07:49:50 FLIGetStepsRemaining err=0 RemainingSteps=0 07:49:50 Filter is already there-color wheel unchanged 07:49:50 Received message from Master: op=Shutter serial=57979 07:49:50 Shutter LASER close 07:49:50 Received message from Camera: op=State serial=57981 07:49:50 GetSingleValue result=40 Value=cccccccc 07:49:50 SkyScan query 07:49:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:49:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:51 Parameters OK 07:49:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:51 Set A/D data flow result=40 07:49:51 Set A/D channel type result=40 07:49:51 Set A/D encoding result=40 07:49:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:51 Set channel filter=0.000000e+000 result=40 07:49:51 Config A/D Result=40 07:49:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:51 Get A/D filter: -9.255963e+061 result=40 07:49:51 Get A/D value=-858993460 result=40 07:49:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:51 Parameters OK 07:49:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:51 Set A/D data flow result=40 07:49:51 Set A/D channel type result=40 07:49:51 Set A/D encoding result=40 07:49:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:51 Set channel filter=0.000000e+000 result=40 07:49:51 Config A/D Result=40 07:49:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:51 Get A/D filter: -9.255963e+061 result=40 07:49:51 Get A/D value=-858993460 result=40 07:49:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:49:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:49:51 Aux= 07:49:51 Message to Camera, serial 57981 queued 07:50:28 Received message from Master: op=PointingHead serial=57994 07:50:28 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:50:28 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:50:28 Point started: ret=0 07:50:28 point_skyscan result=0 07:50:29 Check angles 07:50:29 SkyScan query 07:50:29 SkyScan query done: ret=0 az=64.44<-4296 ze=-68.745<-16583 Statuses=0009 0009 07:50:29 Msec=0 True Az=64.44 Ze=-68.745 Az status=0009 Ze status=0009 07:50:29 Check angles 07:50:29 SkyScan query 07:50:30 SkyScan query done: ret=0 az=82.23<-5482 ze=-90.105<-18007 Statuses=0009 0009 07:50:30 Msec=750 True Az=82.23 Ze=-90.105 Az status=0009 Ze status=0009 07:50:30 Check angles 07:50:30 SkyScan query 07:50:31 SkyScan query done: ret=0 az=99.795<-6653 ze=-111.09<-19406 Statuses=0009 0009 07:50:31 Msec=1500 True Az=99.795 Ze=-111.09 Az status=0009 Ze status=0009 07:50:31 Check angles 07:50:31 SkyScan query 07:50:31 SkyScan query done: ret=0 az=117.525<-7835 ze=-132.435<-20829 Statuses=0009 0009 07:50:31 Msec=2250 True Az=117.525 Ze=-132.435 Az status=0009 Ze status=0009 07:50:32 Check angles 07:50:32 SkyScan query 07:50:32 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.54<-21436 Statuses=0009 0008 07:50:32 Msec=3000 True Az=130.965 Ze=-141.54 Az status=0009 Ze status=0008 07:50:32 Check angles 07:50:32 SkyScan query 07:50:33 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 07:50:33 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 07:50:33 Message to Master queued w/err=0: serial=57994 error=0 07:50:38 Received message from Master: op=Filter serial=57995 07:50:38 Color wheel filter change from 0 to 0 07:50:38 FLIGetFilterPos err=0 currentPosition=0 07:50:38 FLIGetStepsRemaining err=0 RemainingSteps=0 07:50:38 Filter is already there-color wheel unchanged 07:50:38 Received message from Master: op=Shutter serial=57996 07:50:38 Shutter LASER close 07:50:38 Received message from Camera: op=State serial=57998 07:50:38 GetSingleValue result=40 Value=cccccccc 07:50:38 SkyScan query 07:50:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:50:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:39 Parameters OK 07:50:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:39 Set A/D data flow result=40 07:50:39 Set A/D channel type result=40 07:50:39 Set A/D encoding result=40 07:50:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:39 Set channel filter=0.000000e+000 result=40 07:50:39 Config A/D Result=40 07:50:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:39 Get A/D filter: -9.255963e+061 result=40 07:50:39 Get A/D value=-858993460 result=40 07:50:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:39 Parameters OK 07:50:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:39 Set A/D data flow result=40 07:50:39 Set A/D channel type result=40 07:50:39 Set A/D encoding result=40 07:50:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:39 Set channel filter=0.000000e+000 result=40 07:50:39 Config A/D Result=40 07:50:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:39 Get A/D filter: -9.255963e+061 result=40 07:50:39 Get A/D value=-858993460 result=40 07:50:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:39 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:50:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:50:39 Aux= 07:50:39 Message to Camera, serial 57998 queued 07:51:16 Received message from Master: op=PointingHead serial=58011 07:51:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:51:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:51:16 Point started: ret=0 07:51:16 point_skyscan result=0 07:51:17 Check angles 07:51:17 SkyScan query 07:51:17 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.45<-23430 Statuses=0009 0009 07:51:17 Msec=0 True Az=113.01 Ze=-171.45 Az status=0009 Ze status=0009 07:51:18 Check angles 07:51:18 SkyScan query 07:51:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:51:18 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:51:18 Message to Master queued w/err=0: serial=58011 error=0 07:51:23 Received message from Master: op=Filter serial=58012 07:51:23 Color wheel filter change from 0 to 0 07:51:23 FLIGetFilterPos err=0 currentPosition=0 07:51:23 FLIGetStepsRemaining err=0 RemainingSteps=0 07:51:23 Filter is already there-color wheel unchanged 07:51:23 Received message from Master: op=Shutter serial=58013 07:51:23 Shutter LASER open 07:51:23 Received message from Camera: op=State serial=58015 07:51:23 GetSingleValue result=40 Value=cccccccc 07:51:23 SkyScan query 07:51:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:51:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:24 Parameters OK 07:51:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:24 Set A/D data flow result=40 07:51:24 Set A/D channel type result=40 07:51:24 Set A/D encoding result=40 07:51:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:24 Set channel filter=0.000000e+000 result=40 07:51:24 Config A/D Result=40 07:51:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:24 Get A/D filter: -9.255963e+061 result=40 07:51:24 Get A/D value=-858993460 result=40 07:51:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:24 Parameters OK 07:51:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:24 Set A/D data flow result=40 07:51:24 Set A/D channel type result=40 07:51:24 Set A/D encoding result=40 07:51:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:24 Set channel filter=0.000000e+000 result=40 07:51:24 Config A/D Result=40 07:51:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:24 Get A/D filter: -9.255963e+061 result=40 07:51:24 Get A/D value=-858993460 result=40 07:51:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:51:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:51:24 Aux= 07:51:24 Message to Camera, serial 58015 queued 07:51:32 Received message from Master: op=Shutter serial=58025 07:51:32 Shutter LASER close 07:51:33 Received message from Master: op=PointingHead serial=58029 07:51:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:51:33 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:51:33 Point started: ret=0 07:51:33 point_skyscan result=0 07:51:34 Check angles 07:51:34 SkyScan query 07:51:35 SkyScan query done: ret=0 az=136.155<-9077 ze=-142.98<-21532 Statuses=0009 0009 07:51:35 Msec=0 True Az=136.155 Ze=-142.98 Az status=0009 Ze status=0009 07:51:35 Check angles 07:51:35 SkyScan query 07:51:35 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.01<-20134 Statuses=0009 0009 07:51:35 Msec=750 True Az=153.63 Ze=-122.01 Az status=0009 Ze status=0009 07:51:36 Check angles 07:51:36 SkyScan query 07:51:36 SkyScan query done: ret=0 az=171.495<-11433 ze=-100.575<-18705 Statuses=0009 0009 07:51:36 Msec=1500 True Az=171.495 Ze=-100.575 Az status=0009 Ze status=0009 07:51:36 Check angles 07:51:36 SkyScan query 07:51:37 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.665<-17311 Statuses=0008 0009 07:51:37 Msec=2250 True Az=176.025 Ze=-79.665 Az status=0008 Ze status=0009 07:51:37 Check angles 07:51:37 SkyScan query 07:51:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.695<-15913 Statuses=0008 0009 07:51:38 Msec=3000 True Az=175.995 Ze=-58.695 Az status=0008 Ze status=0009 07:51:38 Check angles 07:51:38 SkyScan query 07:51:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 07:51:38 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 07:51:38 Message to Master queued w/err=0: serial=58029 error=0 07:51:43 Received message from Master: op=Filter serial=58030 07:51:43 Color wheel filter change from 0 to 0 07:51:43 FLIGetFilterPos err=0 currentPosition=0 07:51:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:51:43 Filter is already there-color wheel unchanged 07:51:44 Received message from Master: op=Shutter serial=58031 07:51:44 Shutter LASER close 07:51:44 Received message from Camera: op=State serial=58033 07:51:44 GetSingleValue result=40 Value=cccccccc 07:51:44 SkyScan query 07:51:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:51:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:44 Parameters OK 07:51:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:44 Set A/D data flow result=40 07:51:44 Set A/D channel type result=40 07:51:44 Set A/D encoding result=40 07:51:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:44 Set channel filter=0.000000e+000 result=40 07:51:44 Config A/D Result=40 07:51:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:44 Get A/D filter: -9.255963e+061 result=40 07:51:44 Get A/D value=-858993460 result=40 07:51:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:44 Parameters OK 07:51:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:44 Set A/D data flow result=40 07:51:44 Set A/D channel type result=40 07:51:44 Set A/D encoding result=40 07:51:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:44 Set channel filter=0.000000e+000 result=40 07:51:44 Config A/D Result=40 07:51:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:44 Get A/D filter: -9.255963e+061 result=40 07:51:44 Get A/D value=-858993460 result=40 07:51:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:51:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:51:44 Aux= 07:51:44 Message to Camera, serial 58033 queued 07:52:21 Received message from Master: op=PointingHead serial=58046 07:52:21 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:52:21 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:52:22 Point started: ret=0 07:52:22 point_skyscan result=0 07:52:22 Check angles 07:52:22 SkyScan query 07:52:23 SkyScan query done: ret=0 az=152.355<-10157 ze=-21.195<-13413 Statuses=0009 0009 07:52:23 Msec=0 True Az=152.355 Ze=-21.195 Az status=0009 Ze status=0009 07:52:23 Check angles 07:52:23 SkyScan query 07:52:24 SkyScan query done: ret=0 az=134.91<-8994 ze=-0.225<-12015 Statuses=0009 0009 07:52:24 Msec=750 True Az=134.91 Ze=-0.225 Az status=0009 Ze status=0009 07:52:24 Check angles 07:52:24 SkyScan query 07:52:24 SkyScan query done: ret=0 az=117.3<-7820 ze=20.7<-10620 Statuses=0009 0009 07:52:24 Msec=1500 True Az=117.3 Ze=20.7 Az status=0009 Ze status=0009 07:52:25 Check angles 07:52:25 SkyScan query 07:52:25 SkyScan query done: ret=0 az=99.975<-6665 ze=41.685<-9221 Statuses=0009 0009 07:52:25 Msec=2250 True Az=99.975 Ze=41.685 Az status=0009 Ze status=0009 07:52:25 Check angles 07:52:25 SkyScan query 07:52:26 SkyScan query done: ret=0 az=86.07<-5738 ze=51.555<-8563 Statuses=0009 0008 07:52:26 Msec=3000 True Az=86.07 Ze=51.555 Az status=0009 Ze status=0008 07:52:26 Check angles 07:52:26 SkyScan query 07:52:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:52:27 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:52:27 Message to Master queued w/err=0: serial=58046 error=0 07:52:32 Received message from Master: op=Filter serial=58047 07:52:32 Color wheel filter change from 0 to 0 07:52:32 FLIGetFilterPos err=0 currentPosition=0 07:52:32 FLIGetStepsRemaining err=0 RemainingSteps=0 07:52:32 Filter is already there-color wheel unchanged 07:52:32 Received message from Master: op=Shutter serial=58048 07:52:32 Shutter LASER close 07:52:32 Received message from Camera: op=State serial=58050 07:52:32 GetSingleValue result=40 Value=cccccccc 07:52:32 SkyScan query 07:52:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:52:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:32 Parameters OK 07:52:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:32 Set A/D data flow result=40 07:52:32 Set A/D channel type result=40 07:52:32 Set A/D encoding result=40 07:52:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:32 Set channel filter=0.000000e+000 result=40 07:52:32 Config A/D Result=40 07:52:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:32 Get A/D filter: -9.255963e+061 result=40 07:52:32 Get A/D value=-858993460 result=40 07:52:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:32 Parameters OK 07:52:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:32 Set A/D data flow result=40 07:52:32 Set A/D channel type result=40 07:52:32 Set A/D encoding result=40 07:52:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:32 Set channel filter=0.000000e+000 result=40 07:52:32 Config A/D Result=40 07:52:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:32 Get A/D filter: -9.255963e+061 result=40 07:52:32 Get A/D value=-858993460 result=40 07:52:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:52:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:52:32 Aux= 07:52:32 Message to Camera, serial 58050 queued 07:53:09 Received message from Master: op=PointingHead serial=58063 07:53:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:53:09 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:53:10 Point started: ret=0 07:53:10 point_skyscan result=0 07:53:10 Check angles 07:53:10 SkyScan query 07:53:11 SkyScan query done: ret=0 az=108.93<-7262 ze=38.49<-9434 Statuses=0009 0008 07:53:11 Msec=0 True Az=108.93 Ze=38.49 Az status=0009 Ze status=0008 07:53:11 Check angles 07:53:11 SkyScan query 07:53:12 SkyScan query done: ret=0 az=126.495<-8433 ze=38.505<-9433 Statuses=0009 0008 07:53:12 Msec=750 True Az=126.495 Ze=38.505 Az status=0009 Ze status=0008 07:53:12 Check angles 07:53:12 SkyScan query 07:53:13 SkyScan query done: ret=0 az=143.895<-9593 ze=38.505<-9433 Statuses=0009 0008 07:53:13 Msec=1500 True Az=143.895 Ze=38.505 Az status=0009 Ze status=0008 07:53:13 Check angles 07:53:13 SkyScan query 07:53:13 SkyScan query done: ret=0 az=161.34<-10756 ze=38.505<-9433 Statuses=0009 0008 07:53:13 Msec=2250 True Az=161.34 Ze=38.505 Az status=0009 Ze status=0008 07:53:13 Check angles 07:53:13 SkyScan query 07:53:14 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 07:53:14 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 07:53:14 Check angles 07:53:14 SkyScan query 07:53:15 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:53:15 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:53:15 Message to Master queued w/err=0: serial=58063 error=0 07:53:20 Received message from Master: op=Filter serial=58064 07:53:20 Color wheel filter change from 0 to 0 07:53:20 FLIGetFilterPos err=0 currentPosition=0 07:53:20 FLIGetStepsRemaining err=0 RemainingSteps=0 07:53:20 Filter is already there-color wheel unchanged 07:53:20 Received message from Master: op=Shutter serial=58065 07:53:20 Shutter LASER close 07:53:20 Received message from Camera: op=State serial=58067 07:53:20 GetSingleValue result=40 Value=cccccccc 07:53:20 SkyScan query 07:53:21 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:53:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:21 Parameters OK 07:53:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:21 Set A/D data flow result=40 07:53:21 Set A/D channel type result=40 07:53:21 Set A/D encoding result=40 07:53:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:21 Set channel filter=0.000000e+000 result=40 07:53:21 Config A/D Result=40 07:53:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:21 Get A/D filter: -9.255963e+061 result=40 07:53:21 Get A/D value=-858993460 result=40 07:53:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:21 Parameters OK 07:53:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:21 Set A/D data flow result=40 07:53:21 Set A/D channel type result=40 07:53:21 Set A/D encoding result=40 07:53:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:21 Set channel filter=0.000000e+000 result=40 07:53:21 Config A/D Result=40 07:53:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:21 Get A/D filter: -9.255963e+061 result=40 07:53:21 Get A/D value=-858993460 result=40 07:53:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:53:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:53:21 Aux= 07:53:21 Message to Camera, serial 58067 queued 07:53:57 Received message from Master: op=PointingHead serial=58080 07:53:57 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:53:57 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:53:58 Point started: ret=0 07:53:58 point_skyscan result=0 07:53:59 Check angles 07:53:59 SkyScan query 07:53:59 SkyScan query done: ret=0 az=153.165<-10211 ze=8.895<-11407 Statuses=0009 0009 07:53:59 Msec=0 True Az=153.165 Ze=8.895 Az status=0009 Ze status=0009 07:53:59 Check angles 07:53:59 SkyScan query 07:54:00 SkyScan query done: ret=0 az=135.78<-9052 ze=-12.075<-12805 Statuses=0009 0009 07:54:00 Msec=750 True Az=135.78 Ze=-12.075 Az status=0009 Ze status=0009 07:54:00 Check angles 07:54:00 SkyScan query 07:54:01 SkyScan query done: ret=0 az=117.75<-7850 ze=-33.54<-14236 Statuses=0009 0009 07:54:01 Msec=1500 True Az=117.75 Ze=-33.54 Az status=0009 Ze status=0009 07:54:01 Check angles 07:54:01 SkyScan query 07:54:01 SkyScan query done: ret=0 az=100.32<-6688 ze=-51.54<-15436 Statuses=0009 0009 07:54:01 Msec=2250 True Az=100.32 Ze=-51.54 Az status=0009 Ze status=0009 07:54:02 Check angles 07:54:02 SkyScan query 07:54:02 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 07:54:02 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 07:54:02 Check angles 07:54:02 SkyScan query 07:54:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:54:03 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:54:03 Message to Master queued w/err=0: serial=58080 error=0 07:54:08 Received message from Master: op=Filter serial=58081 07:54:08 Color wheel filter change from 0 to 0 07:54:08 FLIGetFilterPos err=0 currentPosition=0 07:54:08 FLIGetStepsRemaining err=0 RemainingSteps=0 07:54:08 Filter is already there-color wheel unchanged 07:54:08 Received message from Master: op=Shutter serial=58082 07:54:08 Shutter LASER close 07:54:08 Received message from Camera: op=State serial=58084 07:54:08 GetSingleValue result=40 Value=cccccccc 07:54:08 SkyScan query 07:54:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:54:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:09 Parameters OK 07:54:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:09 Set A/D data flow result=40 07:54:09 Set A/D channel type result=40 07:54:09 Set A/D encoding result=40 07:54:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:09 Set channel filter=0.000000e+000 result=40 07:54:09 Config A/D Result=40 07:54:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:09 Get A/D filter: -9.255963e+061 result=40 07:54:09 Get A/D value=-858993460 result=40 07:54:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:09 Parameters OK 07:54:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:09 Set A/D data flow result=40 07:54:09 Set A/D channel type result=40 07:54:09 Set A/D encoding result=40 07:54:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:09 Set channel filter=0.000000e+000 result=40 07:54:09 Config A/D Result=40 07:54:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:09 Get A/D filter: -9.255963e+061 result=40 07:54:09 Get A/D value=-858993460 result=40 07:54:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:54:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:54:09 Aux= 07:54:09 Message to Camera, serial 58084 queued 07:54:45 Received message from Master: op=PointingHead serial=58097 07:54:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:54:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:54:46 Point started: ret=0 07:54:46 point_skyscan result=0 07:54:47 Check angles 07:54:47 SkyScan query 07:54:47 SkyScan query done: ret=0 az=108.84<-7256 ze=-81.075<-17405 Statuses=0009 0009 07:54:47 Msec=0 True Az=108.84 Ze=-81.075 Az status=0009 Ze status=0009 07:54:47 Check angles 07:54:47 SkyScan query 07:54:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.06<-18804 Statuses=0008 0009 07:54:48 Msec=750 True Az=112.995 Ze=-102.06 Az status=0008 Ze status=0009 07:54:48 Check angles 07:54:48 SkyScan query 07:54:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-123<-20200 Statuses=0008 0009 07:54:49 Msec=1500 True Az=112.995 Ze=-123 Az status=0008 Ze status=0009 07:54:49 Check angles 07:54:49 SkyScan query 07:54:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.955<-21597 Statuses=0008 0009 07:54:49 Msec=2250 True Az=112.995 Ze=-143.955 Az status=0008 Ze status=0009 07:54:50 Check angles 07:54:50 SkyScan query 07:54:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.91<-22994 Statuses=0008 0009 07:54:50 Msec=3000 True Az=112.995 Ze=-164.91 Az status=0008 Ze status=0009 07:54:50 Check angles 07:54:50 SkyScan query 07:54:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:54:51 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:54:51 Message to Master queued w/err=0: serial=58097 error=0 07:54:56 Received message from Master: op=Filter serial=58098 07:54:56 Color wheel filter change from 0 to 0 07:54:56 FLIGetFilterPos err=0 currentPosition=0 07:54:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:54:56 Filter is already there-color wheel unchanged 07:54:56 Received message from Master: op=Shutter serial=58099 07:54:56 Shutter LASER open 07:54:56 Received message from Camera: op=State serial=58101 07:54:56 GetSingleValue result=40 Value=cccccccc 07:54:56 SkyScan query 07:54:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:54:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:57 Parameters OK 07:54:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:57 Set A/D data flow result=40 07:54:57 Set A/D channel type result=40 07:54:57 Set A/D encoding result=40 07:54:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:57 Set channel filter=0.000000e+000 result=40 07:54:57 Config A/D Result=40 07:54:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:57 Get A/D filter: -9.255963e+061 result=40 07:54:57 Get A/D value=-858993460 result=40 07:54:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:57 Parameters OK 07:54:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:57 Set A/D data flow result=40 07:54:57 Set A/D channel type result=40 07:54:57 Set A/D encoding result=40 07:54:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:57 Set channel filter=0.000000e+000 result=40 07:54:57 Config A/D Result=40 07:54:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:57 Get A/D filter: -9.255963e+061 result=40 07:54:57 Get A/D value=-858993460 result=40 07:54:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:54:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:54:57 Aux= 07:54:57 Message to Camera, serial 58101 queued 07:55:05 Received message from Master: op=Shutter serial=58111 07:55:05 Shutter LASER close 07:55:06 Received message from Master: op=PointingHead serial=58115 07:55:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:55:06 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:55:06 Point started: ret=0 07:55:06 point_skyscan result=0 07:55:07 Check angles 07:55:07 SkyScan query 07:55:07 SkyScan query done: ret=0 az=89.49<-5966 ze=156.69<-1554 Statuses=0009 0009 07:55:07 Msec=0 True Az=89.49 Ze=156.69 Az status=0009 Ze status=0009 07:55:08 Check angles 07:55:08 SkyScan query 07:55:08 SkyScan query done: ret=0 az=71.91<-4794 ze=135.765<-2949 Statuses=0009 0009 07:55:08 Msec=750 True Az=71.91 Ze=135.765 Az status=0009 Ze status=0009 07:55:08 Check angles 07:55:08 SkyScan query 07:55:09 SkyScan query done: ret=0 az=54.69<-3646 ze=114.81<-4346 Statuses=0009 0009 07:55:09 Msec=1500 True Az=54.69 Ze=114.81 Az status=0009 Ze status=0009 07:55:09 Check angles 07:55:09 SkyScan query 07:55:10 SkyScan query done: ret=0 az=40.905<-2727 ze=93.825<-5745 Statuses=0009 0009 07:55:10 Msec=2250 True Az=40.905 Ze=93.825 Az status=0009 Ze status=0009 07:55:10 Check angles 07:55:10 SkyScan query 07:55:10 SkyScan query done: ret=0 az=40.995<-2733 ze=72.885<-7141 Statuses=0008 0009 07:55:10 Msec=3000 True Az=40.995 Ze=72.885 Az status=0008 Ze status=0009 07:55:11 Check angles 07:55:11 SkyScan query 07:55:11 SkyScan query done: ret=0 az=40.995<-2733 ze=52.26<-8516 Statuses=0008 0009 07:55:11 Msec=3750 True Az=40.995 Ze=52.26 Az status=0008 Ze status=0009 07:55:11 Check angles 07:55:11 SkyScan query 07:55:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:55:12 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:55:12 Message to Master queued w/err=0: serial=58115 error=0 07:55:17 Received message from Master: op=Filter serial=58116 07:55:17 Color wheel filter change from 0 to 0 07:55:17 FLIGetFilterPos err=0 currentPosition=0 07:55:17 FLIGetStepsRemaining err=0 RemainingSteps=0 07:55:17 Filter is already there-color wheel unchanged 07:55:17 Received message from Master: op=Shutter serial=58117 07:55:17 Shutter LASER close 07:55:17 Received message from Camera: op=State serial=58119 07:55:17 GetSingleValue result=40 Value=cccccccc 07:55:17 SkyScan query 07:55:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:55:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:18 Parameters OK 07:55:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:18 Set A/D data flow result=40 07:55:18 Set A/D channel type result=40 07:55:18 Set A/D encoding result=40 07:55:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:18 Set channel filter=0.000000e+000 result=40 07:55:18 Config A/D Result=40 07:55:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:18 Get A/D filter: -9.255963e+061 result=40 07:55:18 Get A/D value=-858993460 result=40 07:55:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:18 Parameters OK 07:55:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:18 Set A/D data flow result=40 07:55:18 Set A/D channel type result=40 07:55:18 Set A/D encoding result=40 07:55:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:18 Set channel filter=0.000000e+000 result=40 07:55:18 Config A/D Result=40 07:55:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:18 Get A/D filter: -9.255963e+061 result=40 07:55:18 Get A/D value=-858993460 result=40 07:55:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:55:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:55:18 Aux= 07:55:18 Message to Camera, serial 58119 queued [UTC 2018-12-11 07:55:54] 07:55:55 Received message from Master: op=PointingHead serial=58132 07:55:55 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:55:55 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:55:55 Point started: ret=0 07:55:55 point_skyscan result=0 07:55:56 Check angles 07:55:56 SkyScan query 07:55:56 SkyScan query done: ret=0 az=63.99<-4266 ze=66.555<-7563 Statuses=0009 0008 07:55:56 Msec=0 True Az=63.99 Ze=66.555 Az status=0009 Ze status=0008 07:55:57 Check angles 07:55:57 SkyScan query 07:55:57 SkyScan query done: ret=0 az=81.315<-5421 ze=66.495<-7567 Statuses=0009 0008 07:55:57 Msec=750 True Az=81.315 Ze=66.495 Az status=0009 Ze status=0008 07:55:57 Check angles 07:55:57 SkyScan query 07:55:58 SkyScan query done: ret=0 az=98.895<-6593 ze=66.495<-7567 Statuses=0009 0008 07:55:58 Msec=1500 True Az=98.895 Ze=66.495 Az status=0009 Ze status=0008 07:55:58 Check angles 07:55:58 SkyScan query 07:55:59 SkyScan query done: ret=0 az=116.475<-7765 ze=66.495<-7567 Statuses=0009 0008 07:55:59 Msec=2250 True Az=116.475 Ze=66.495 Az status=0009 Ze status=0008 07:55:59 Check angles 07:55:59 SkyScan query 07:55:59 SkyScan query done: ret=0 az=134.07<-8938 ze=66.495<-7567 Statuses=0009 0008 07:55:59 Msec=3000 True Az=134.07 Ze=66.495 Az status=0009 Ze status=0008 07:56:00 Check angles 07:56:00 SkyScan query 07:56:00 SkyScan query done: ret=0 az=151.425<-10095 ze=66.495<-7567 Statuses=0009 0008 07:56:00 Msec=3750 True Az=151.425 Ze=66.495 Az status=0009 Ze status=0008 07:56:00 Check angles 07:56:00 SkyScan query 07:56:01 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:56:01 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 07:56:01 Message to Master queued w/err=0: serial=58132 error=0 07:56:06 Received message from Master: op=Filter serial=58133 07:56:06 Color wheel filter change from 0 to 0 07:56:06 FLIGetFilterPos err=0 currentPosition=0 07:56:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:56:06 Filter is already there-color wheel unchanged 07:56:06 Received message from Master: op=Shutter serial=58134 07:56:06 Shutter LASER close 07:56:06 Received message from Camera: op=State serial=58136 07:56:06 GetSingleValue result=40 Value=cccccccc 07:56:06 SkyScan query 07:56:07 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:56:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:07 Parameters OK 07:56:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:07 Set A/D data flow result=40 07:56:07 Set A/D channel type result=40 07:56:07 Set A/D encoding result=40 07:56:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:07 Set channel filter=0.000000e+000 result=40 07:56:07 Config A/D Result=40 07:56:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:07 Get A/D filter: -9.255963e+061 result=40 07:56:07 Get A/D value=-858993460 result=40 07:56:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:07 Parameters OK 07:56:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:07 Set A/D data flow result=40 07:56:07 Set A/D channel type result=40 07:56:07 Set A/D encoding result=40 07:56:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:07 Set channel filter=0.000000e+000 result=40 07:56:07 Config A/D Result=40 07:56:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:07 Get A/D filter: -9.255963e+061 result=40 07:56:07 Get A/D value=-858993460 result=40 07:56:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:07 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:56:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:56:07 Aux= 07:56:07 Message to Camera, serial 58136 queued 07:56:43 Received message from Master: op=PointingHead serial=58149 07:56:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:56:43 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:56:44 Point started: ret=0 07:56:44 point_skyscan result=0 07:56:45 Check angles 07:56:45 SkyScan query 07:56:45 SkyScan query done: ret=0 az=134.955<-8997 ze=36.675<-9555 Statuses=0009 0009 07:56:45 Msec=0 True Az=134.955 Ze=36.675 Az status=0009 Ze status=0009 07:56:45 Check angles 07:56:45 SkyScan query 07:56:46 SkyScan query done: ret=0 az=117.405<-7827 ze=15.765<-10949 Statuses=0009 0009 07:56:46 Msec=750 True Az=117.405 Ze=15.765 Az status=0009 Ze status=0009 07:56:46 Check angles 07:56:46 SkyScan query 07:56:47 SkyScan query done: ret=0 az=99.78<-6652 ze=-5.64<-12376 Statuses=0009 0009 07:56:47 Msec=1500 True Az=99.78 Ze=-5.64 Az status=0009 Ze status=0009 07:56:47 Check angles 07:56:47 SkyScan query 07:56:47 SkyScan query done: ret=0 az=82.185<-5479 ze=-26.595<-13773 Statuses=0009 0009 07:56:47 Msec=2250 True Az=82.185 Ze=-26.595 Az status=0009 Ze status=0009 07:56:48 Check angles 07:56:48 SkyScan query 07:56:48 SkyScan query done: ret=0 az=64.725<-4315 ze=-38.565<-14571 Statuses=0009 0008 07:56:48 Msec=3000 True Az=64.725 Ze=-38.565 Az status=0009 Ze status=0008 07:56:48 Check angles 07:56:48 SkyScan query 07:56:49 SkyScan query done: ret=0 az=47.265<-3151 ze=-38.52<-14568 Statuses=0009 0008 07:56:49 Msec=3750 True Az=47.265 Ze=-38.52 Az status=0009 Ze status=0008 07:56:49 Check angles 07:56:49 SkyScan query 07:56:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:56:50 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:56:50 Message to Master queued w/err=0: serial=58149 error=0 07:56:55 Received message from Master: op=Filter serial=58150 07:56:55 Color wheel filter change from 0 to 0 07:56:55 FLIGetFilterPos err=0 currentPosition=0 07:56:55 FLIGetStepsRemaining err=0 RemainingSteps=0 07:56:55 Filter is already there-color wheel unchanged 07:56:55 Received message from Master: op=Shutter serial=58151 07:56:55 Shutter LASER close 07:56:55 Received message from Camera: op=State serial=58153 07:56:55 GetSingleValue result=40 Value=cccccccc 07:56:55 SkyScan query 07:56:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:56:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:55 Parameters OK 07:56:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:55 Set A/D data flow result=40 07:56:55 Set A/D channel type result=40 07:56:55 Set A/D encoding result=40 07:56:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:55 Set channel filter=0.000000e+000 result=40 07:56:55 Config A/D Result=40 07:56:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:55 Get A/D filter: -9.255963e+061 result=40 07:56:55 Get A/D value=-858993460 result=40 07:56:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:55 Parameters OK 07:56:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:55 Set A/D data flow result=40 07:56:55 Set A/D channel type result=40 07:56:55 Set A/D encoding result=40 07:56:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:55 Set channel filter=0.000000e+000 result=40 07:56:55 Config A/D Result=40 07:56:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:55 Get A/D filter: -9.255963e+061 result=40 07:56:55 Get A/D value=-858993460 result=40 07:56:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:56:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:56:55 Aux= 07:56:55 Message to Camera, serial 58153 queued 07:57:32 Received message from Master: op=PointingHead serial=58166 07:57:32 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:57:32 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:57:33 Point started: ret=0 07:57:33 point_skyscan result=0 07:57:33 Check angles 07:57:33 SkyScan query 07:57:34 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.34<-16556 Statuses=0009 0009 07:57:34 Msec=0 True Az=63.96 Ze=-68.34 Az status=0009 Ze status=0009 07:57:34 Check angles 07:57:34 SkyScan query 07:57:35 SkyScan query done: ret=0 az=81.81<-5454 ze=-89.775<-17985 Statuses=0009 0009 07:57:35 Msec=750 True Az=81.81 Ze=-89.775 Az status=0009 Ze status=0009 07:57:35 Check angles 07:57:35 SkyScan query 07:57:36 SkyScan query done: ret=0 az=99.72<-6648 ze=-111.165<-19411 Statuses=0009 0009 07:57:36 Msec=1500 True Az=99.72 Ze=-111.165 Az status=0009 Ze status=0009 07:57:36 Check angles 07:57:36 SkyScan query 07:57:36 SkyScan query done: ret=0 az=117.18<-7812 ze=-132.09<-20806 Statuses=0009 0009 07:57:36 Msec=2250 True Az=117.18 Ze=-132.09 Az status=0009 Ze status=0009 07:57:36 Check angles 07:57:36 SkyScan query 07:57:37 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.54<-21436 Statuses=0009 0008 07:57:37 Msec=3000 True Az=131.055 Ze=-141.54 Az status=0009 Ze status=0008 07:57:37 Check angles 07:57:37 SkyScan query 07:57:38 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:57:38 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:57:38 Message to Master queued w/err=0: serial=58166 error=0 07:57:43 Received message from Master: op=Filter serial=58167 07:57:43 Color wheel filter change from 0 to 0 07:57:43 FLIGetFilterPos err=0 currentPosition=0 07:57:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:57:43 Filter is already there-color wheel unchanged 07:57:43 Received message from Master: op=Shutter serial=58168 07:57:43 Shutter LASER close 07:57:43 Received message from Camera: op=State serial=58170 07:57:43 GetSingleValue result=40 Value=cccccccc 07:57:43 SkyScan query 07:57:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:57:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:44 Parameters OK 07:57:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:44 Set A/D data flow result=40 07:57:44 Set A/D channel type result=40 07:57:44 Set A/D encoding result=40 07:57:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:44 Set channel filter=0.000000e+000 result=40 07:57:44 Config A/D Result=40 07:57:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:44 Get A/D filter: -9.255963e+061 result=40 07:57:44 Get A/D value=-858993460 result=40 07:57:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:44 Parameters OK 07:57:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:44 Set A/D data flow result=40 07:57:44 Set A/D channel type result=40 07:57:44 Set A/D encoding result=40 07:57:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:44 Set channel filter=0.000000e+000 result=40 07:57:44 Config A/D Result=40 07:57:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:44 Get A/D filter: -9.255963e+061 result=40 07:57:44 Get A/D value=-858993460 result=40 07:57:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:44 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:57:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:57:44 Aux= 07:57:44 Message to Camera, serial 58170 queued 07:58:19 Received message from Master: op=PointingHead serial=58182 07:58:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:58:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:58:20 Point started: ret=0 07:58:20 point_skyscan result=0 07:58:21 Check angles 07:58:21 SkyScan query 07:58:21 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.39<-23426 Statuses=0009 0009 07:58:21 Msec=0 True Az=113.01 Ze=-171.39 Az status=0009 Ze status=0009 07:58:21 Check angles 07:58:21 SkyScan query 07:58:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:58:22 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:58:22 Message to Master queued w/err=0: serial=58182 error=0 07:58:27 Received message from Master: op=Filter serial=58183 07:58:27 Color wheel filter change from 0 to 0 07:58:27 FLIGetFilterPos err=0 currentPosition=0 07:58:27 FLIGetStepsRemaining err=0 RemainingSteps=0 07:58:27 Filter is already there-color wheel unchanged 07:58:27 Received message from Master: op=Shutter serial=58184 07:58:27 Shutter LASER open 07:58:27 Received message from Camera: op=State serial=58186 07:58:27 GetSingleValue result=40 Value=cccccccc 07:58:27 SkyScan query 07:58:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:58:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:28 Parameters OK 07:58:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:28 Set A/D data flow result=40 07:58:28 Set A/D channel type result=40 07:58:28 Set A/D encoding result=40 07:58:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:28 Set channel filter=0.000000e+000 result=40 07:58:28 Config A/D Result=40 07:58:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:28 Get A/D filter: -9.255963e+061 result=40 07:58:28 Get A/D value=-858993460 result=40 07:58:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:28 Parameters OK 07:58:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:28 Set A/D data flow result=40 07:58:28 Set A/D channel type result=40 07:58:28 Set A/D encoding result=40 07:58:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:28 Set channel filter=0.000000e+000 result=40 07:58:28 Config A/D Result=40 07:58:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:28 Get A/D filter: -9.255963e+061 result=40 07:58:28 Get A/D value=-858993460 result=40 07:58:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:58:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:58:28 Aux= 07:58:28 Message to Camera, serial 58186 queued 07:58:36 Received message from Master: op=Shutter serial=58196 07:58:36 Shutter LASER close 07:58:37 Received message from Master: op=PointingHead serial=58200 07:58:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:58:37 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:58:37 Point started: ret=0 07:58:37 point_skyscan result=0 07:58:38 Check angles 07:58:38 SkyScan query 07:58:39 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.415<-21561 Statuses=0009 0009 07:58:39 Msec=0 True Az=135.765 Ze=-143.415 Az status=0009 Ze status=0009 07:58:39 Check angles 07:58:39 SkyScan query 07:58:39 SkyScan query done: ret=0 az=153.63<-10242 ze=-121.98<-20132 Statuses=0009 0009 07:58:39 Msec=750 True Az=153.63 Ze=-121.98 Az status=0009 Ze status=0009 07:58:39 Check angles 07:58:39 SkyScan query 07:58:40 SkyScan query done: ret=0 az=171.09<-11406 ze=-101.07<-18738 Statuses=0009 0009 07:58:40 Msec=1500 True Az=171.09 Ze=-101.07 Az status=0009 Ze status=0009 07:58:40 Check angles 07:58:40 SkyScan query 07:58:41 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.13<-17342 Statuses=0008 0009 07:58:41 Msec=2250 True Az=176.025 Ze=-80.13 Az status=0008 Ze status=0009 07:58:41 Check angles 07:58:41 SkyScan query 07:58:42 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.68<-15912 Statuses=0008 0009 07:58:42 Msec=3000 True Az=176.01 Ze=-58.68 Az status=0008 Ze status=0009 07:58:42 Check angles 07:58:42 SkyScan query 07:58:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 07:58:42 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 07:58:42 Message to Master queued w/err=0: serial=58200 error=0 07:58:47 Received message from Master: op=Filter serial=58201 07:58:47 Color wheel filter change from 0 to 0 07:58:47 FLIGetFilterPos err=0 currentPosition=0 07:58:47 FLIGetStepsRemaining err=0 RemainingSteps=0 07:58:47 Filter is already there-color wheel unchanged 07:58:47 Received message from Master: op=Shutter serial=58202 07:58:47 Shutter LASER close 07:58:48 Received message from Camera: op=State serial=58204 07:58:48 GetSingleValue result=40 Value=cccccccc 07:58:48 SkyScan query 07:58:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:58:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:48 Parameters OK 07:58:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:48 Set A/D data flow result=40 07:58:48 Set A/D channel type result=40 07:58:48 Set A/D encoding result=40 07:58:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:48 Set channel filter=0.000000e+000 result=40 07:58:48 Config A/D Result=40 07:58:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:48 Get A/D filter: -9.255963e+061 result=40 07:58:48 Get A/D value=-858993460 result=40 07:58:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:48 Parameters OK 07:58:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:48 Set A/D data flow result=40 07:58:48 Set A/D channel type result=40 07:58:48 Set A/D encoding result=40 07:58:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:48 Set channel filter=0.000000e+000 result=40 07:58:48 Config A/D Result=40 07:58:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:48 Get A/D filter: -9.255963e+061 result=40 07:58:48 Get A/D value=-858993460 result=40 07:58:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:58:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:58:48 Aux= 07:58:48 Message to Camera, serial 58204 queued 07:59:25 Received message from Master: op=PointingHead serial=58217 07:59:25 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:59:25 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:59:25 Point started: ret=0 07:59:25 point_skyscan result=0 07:59:26 Check angles 07:59:26 SkyScan query 07:59:27 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.66<-13444 Statuses=0009 0009 07:59:27 Msec=0 True Az=152.94 Ze=-21.66 Az status=0009 Ze status=0009 07:59:27 Check angles 07:59:27 SkyScan query 07:59:27 SkyScan query done: ret=0 az=135.48<-9032 ze=-0.66<-12044 Statuses=0009 0009 07:59:27 Msec=750 True Az=135.48 Ze=-0.66 Az status=0009 Ze status=0009 07:59:28 Check angles 07:59:28 SkyScan query 07:59:28 SkyScan query done: ret=0 az=117.9<-7860 ze=20.25<-10650 Statuses=0009 0009 07:59:28 Msec=1500 True Az=117.9 Ze=20.25 Az status=0009 Ze status=0009 07:59:28 Check angles 07:59:28 SkyScan query 07:59:29 SkyScan query done: ret=0 az=100.11<-6674 ze=41.685<-9221 Statuses=0009 0009 07:59:29 Msec=2250 True Az=100.11 Ze=41.685 Az status=0009 Ze status=0009 07:59:29 Check angles 07:59:29 SkyScan query 07:59:30 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 07:59:30 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 07:59:30 Check angles 07:59:30 SkyScan query 07:59:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:59:31 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:59:31 Message to Master queued w/err=0: serial=58217 error=0 07:59:36 Received message from Master: op=Filter serial=58218 07:59:36 Color wheel filter change from 0 to 0 07:59:36 FLIGetFilterPos err=0 currentPosition=0 07:59:36 FLIGetStepsRemaining err=0 RemainingSteps=0 07:59:36 Filter is already there-color wheel unchanged 07:59:36 Received message from Master: op=Shutter serial=58219 07:59:36 Shutter LASER close 07:59:36 Received message from Camera: op=State serial=58221 07:59:36 GetSingleValue result=40 Value=cccccccc 07:59:36 SkyScan query 07:59:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:59:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:36 Parameters OK 07:59:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:36 Set A/D data flow result=40 07:59:36 Set A/D channel type result=40 07:59:36 Set A/D encoding result=40 07:59:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:36 Set channel filter=0.000000e+000 result=40 07:59:36 Config A/D Result=40 07:59:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:36 Get A/D filter: -9.255963e+061 result=40 07:59:36 Get A/D value=-858993460 result=40 07:59:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:36 Parameters OK 07:59:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:36 Set A/D data flow result=40 07:59:36 Set A/D channel type result=40 07:59:36 Set A/D encoding result=40 07:59:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:36 Set channel filter=0.000000e+000 result=40 07:59:36 Config A/D Result=40 07:59:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:36 Get A/D filter: -9.255963e+061 result=40 07:59:36 Get A/D value=-858993460 result=40 07:59:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:59:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:59:36 Aux= 07:59:36 Message to Camera, serial 58221 queued 08:00:13 Received message from Master: op=PointingHead serial=58234 08:00:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:00:13 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:00:14 Point started: ret=0 08:00:14 point_skyscan result=0 08:00:14 Check angles 08:00:14 SkyScan query 08:00:15 SkyScan query done: ret=0 az=109.53<-7302 ze=38.49<-9434 Statuses=0009 0008 08:00:15 Msec=0 True Az=109.53 Ze=38.49 Az status=0009 Ze status=0008 08:00:15 Check angles 08:00:15 SkyScan query 08:00:16 SkyScan query done: ret=0 az=126.96<-8464 ze=38.505<-9433 Statuses=0009 0008 08:00:16 Msec=750 True Az=126.96 Ze=38.505 Az status=0009 Ze status=0008 08:00:16 Check angles 08:00:16 SkyScan query 08:00:16 SkyScan query done: ret=0 az=144.51<-9634 ze=38.505<-9433 Statuses=0009 0008 08:00:16 Msec=1500 True Az=144.51 Ze=38.505 Az status=0009 Ze status=0008 08:00:17 Check angles 08:00:17 SkyScan query 08:00:17 SkyScan query done: ret=0 az=162.27<-10818 ze=38.505<-9433 Statuses=0009 0008 08:00:17 Msec=2250 True Az=162.27 Ze=38.505 Az status=0009 Ze status=0008 08:00:17 Check angles 08:00:17 SkyScan query 08:00:18 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:00:18 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:00:18 Check angles 08:00:18 SkyScan query 08:00:19 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:00:19 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:00:19 Message to Master queued w/err=0: serial=58234 error=0 08:00:24 Received message from Master: op=Filter serial=58235 08:00:24 Color wheel filter change from 0 to 0 08:00:24 FLIGetFilterPos err=0 currentPosition=0 08:00:24 FLIGetStepsRemaining err=0 RemainingSteps=0 08:00:24 Filter is already there-color wheel unchanged 08:00:24 Received message from Master: op=Shutter serial=58236 08:00:24 Shutter LASER close 08:00:24 Received message from Camera: op=State serial=58238 08:00:24 GetSingleValue result=40 Value=cccccccc 08:00:24 SkyScan query 08:00:24 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:00:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:24 Parameters OK 08:00:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:24 Set A/D data flow result=40 08:00:24 Set A/D channel type result=40 08:00:24 Set A/D encoding result=40 08:00:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:24 Set channel filter=0.000000e+000 result=40 08:00:24 Config A/D Result=40 08:00:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:24 Get A/D filter: -9.255963e+061 result=40 08:00:24 Get A/D value=-858993460 result=40 08:00:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:24 Parameters OK 08:00:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:24 Set A/D data flow result=40 08:00:24 Set A/D channel type result=40 08:00:24 Set A/D encoding result=40 08:00:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:24 Set channel filter=0.000000e+000 result=40 08:00:24 Config A/D Result=40 08:00:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:24 Get A/D filter: -9.255963e+061 result=40 08:00:24 Get A/D value=-858993460 result=40 08:00:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:00:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:00:24 Aux= 08:00:24 Message to Camera, serial 58238 queued 08:01:01 Received message from Master: op=PointingHead serial=58251 08:01:01 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:01:01 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:01:02 Point started: ret=0 08:01:02 point_skyscan result=0 08:01:02 Check angles 08:01:02 SkyScan query 08:01:03 SkyScan query done: ret=0 az=152.985<-10199 ze=8.79<-11414 Statuses=0009 0009 08:01:03 Msec=0 True Az=152.985 Ze=8.79 Az status=0009 Ze status=0009 08:01:03 Check angles 08:01:03 SkyScan query 08:01:04 SkyScan query done: ret=0 az=135.72<-9048 ze=-12.165<-12811 Statuses=0009 0009 08:01:04 Msec=750 True Az=135.72 Ze=-12.165 Az status=0009 Ze status=0009 08:01:04 Check angles 08:01:04 SkyScan query 08:01:04 SkyScan query done: ret=0 az=118.095<-7873 ze=-33.105<-14207 Statuses=0009 0009 08:01:04 Msec=1500 True Az=118.095 Ze=-33.105 Az status=0009 Ze status=0009 08:01:05 Check angles 08:01:05 SkyScan query 08:01:05 SkyScan query done: ret=0 az=100.545<-6703 ze=-51.51<-15434 Statuses=0009 0009 08:01:05 Msec=2250 True Az=100.545 Ze=-51.51 Az status=0009 Ze status=0009 08:01:05 Check angles 08:01:05 SkyScan query 08:01:06 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 08:01:06 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 08:01:06 Check angles 08:01:06 SkyScan query 08:01:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:01:07 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:01:07 Message to Master queued w/err=0: serial=58251 error=0 08:01:12 Received message from Master: op=Filter serial=58252 08:01:12 Color wheel filter change from 0 to 0 08:01:12 FLIGetFilterPos err=0 currentPosition=0 08:01:12 FLIGetStepsRemaining err=0 RemainingSteps=0 08:01:12 Filter is already there-color wheel unchanged 08:01:12 Received message from Master: op=Shutter serial=58253 08:01:12 Shutter LASER close 08:01:12 Received message from Camera: op=State serial=58255 08:01:12 GetSingleValue result=40 Value=cccccccc 08:01:12 SkyScan query 08:01:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:01:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:13 Parameters OK 08:01:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:13 Set A/D data flow result=40 08:01:13 Set A/D channel type result=40 08:01:13 Set A/D encoding result=40 08:01:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:13 Set channel filter=0.000000e+000 result=40 08:01:13 Config A/D Result=40 08:01:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:13 Get A/D filter: -9.255963e+061 result=40 08:01:13 Get A/D value=-858993460 result=40 08:01:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:13 Parameters OK 08:01:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:13 Set A/D data flow result=40 08:01:13 Set A/D channel type result=40 08:01:13 Set A/D encoding result=40 08:01:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:13 Set channel filter=0.000000e+000 result=40 08:01:13 Config A/D Result=40 08:01:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:13 Get A/D filter: -9.255963e+061 result=40 08:01:13 Get A/D value=-858993460 result=40 08:01:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:01:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:01:13 Aux= 08:01:13 Message to Camera, serial 58255 queued 08:01:49 Received message from Master: op=PointingHead serial=58268 08:01:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:01:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:01:50 Point started: ret=0 08:01:50 point_skyscan result=0 08:01:50 Check angles 08:01:50 SkyScan query 08:01:51 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.285<-17419 Statuses=0009 0009 08:01:51 Msec=0 True Az=108.975 Ze=-81.285 Az status=0009 Ze status=0009 08:01:51 Check angles 08:01:51 SkyScan query 08:01:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.675<-18845 Statuses=0008 0009 08:01:52 Msec=750 True Az=112.995 Ze=-102.675 Az status=0008 Ze status=0009 08:01:52 Check angles 08:01:52 SkyScan query 08:01:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.615<-20241 Statuses=0008 0009 08:01:53 Msec=1500 True Az=112.995 Ze=-123.615 Az status=0008 Ze status=0009 08:01:53 Check angles 08:01:53 SkyScan query 08:01:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.585<-21639 Statuses=0008 0009 08:01:53 Msec=2250 True Az=112.995 Ze=-144.585 Az status=0008 Ze status=0009 08:01:53 Check angles 08:01:53 SkyScan query 08:01:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.96<-23064 Statuses=0008 0009 08:01:54 Msec=3000 True Az=112.995 Ze=-165.96 Az status=0008 Ze status=0009 08:01:54 Check angles 08:01:54 SkyScan query 08:01:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:01:55 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:01:55 Message to Master queued w/err=0: serial=58268 error=0 08:02:00 Received message from Master: op=Filter serial=58269 08:02:00 Color wheel filter change from 0 to 0 08:02:00 FLIGetFilterPos err=0 currentPosition=0 08:02:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:02:00 Filter is already there-color wheel unchanged 08:02:00 Received message from Master: op=Shutter serial=58270 08:02:00 Shutter LASER open 08:02:00 Received message from Camera: op=State serial=58272 08:02:00 GetSingleValue result=40 Value=cccccccc 08:02:00 SkyScan query 08:02:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:02:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:01 Parameters OK 08:02:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:01 Set A/D data flow result=40 08:02:01 Set A/D channel type result=40 08:02:01 Set A/D encoding result=40 08:02:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:01 Set channel filter=0.000000e+000 result=40 08:02:01 Config A/D Result=40 08:02:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:01 Get A/D filter: -9.255963e+061 result=40 08:02:01 Get A/D value=-858993460 result=40 08:02:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:01 Parameters OK 08:02:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:01 Set A/D data flow result=40 08:02:01 Set A/D channel type result=40 08:02:01 Set A/D encoding result=40 08:02:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:01 Set channel filter=0.000000e+000 result=40 08:02:01 Config A/D Result=40 08:02:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:01 Get A/D filter: -9.255963e+061 result=40 08:02:01 Get A/D value=-858993460 result=40 08:02:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:02:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:02:01 Aux= 08:02:01 Message to Camera, serial 58272 queued 08:02:09 Received message from Master: op=Shutter serial=58282 08:02:09 Shutter LASER close 08:02:10 Received message from Master: op=PointingHead serial=58286 08:02:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:02:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:02:10 Point started: ret=0 08:02:10 point_skyscan result=0 08:02:11 Check angles 08:02:11 SkyScan query 08:02:11 SkyScan query done: ret=0 az=90.135<-6009 ze=157.515<-1499 Statuses=0009 0009 08:02:11 Msec=0 True Az=90.135 Ze=157.515 Az status=0009 Ze status=0009 08:02:11 Check angles 08:02:11 SkyScan query 08:02:12 SkyScan query done: ret=0 az=72.225<-4815 ze=136.095<-2927 Statuses=0009 0009 08:02:12 Msec=750 True Az=72.225 Ze=136.095 Az status=0009 Ze status=0009 08:02:12 Check angles 08:02:12 SkyScan query 08:02:13 SkyScan query done: ret=0 az=54.93<-3662 ze=115.185<-4321 Statuses=0009 0009 08:02:13 Msec=1500 True Az=54.93 Ze=115.185 Az status=0009 Ze status=0009 08:02:13 Check angles 08:02:13 SkyScan query 08:02:14 SkyScan query done: ret=0 az=40.875<-2725 ze=94.185<-5721 Statuses=0009 0009 08:02:14 Msec=2250 True Az=40.875 Ze=94.185 Az status=0009 Ze status=0009 08:02:14 Check angles 08:02:14 SkyScan query 08:02:14 SkyScan query done: ret=0 az=40.995<-2733 ze=73.26<-7116 Statuses=0008 0009 08:02:14 Msec=3000 True Az=40.995 Ze=73.26 Az status=0008 Ze status=0009 08:02:14 Check angles 08:02:14 SkyScan query 08:02:15 SkyScan query done: ret=0 az=40.995<-2733 ze=52.725<-8485 Statuses=0008 0009 08:02:15 Msec=3750 True Az=40.995 Ze=52.725 Az status=0008 Ze status=0009 08:02:15 Check angles 08:02:15 SkyScan query 08:02:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:02:16 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:02:16 Message to Master queued w/err=0: serial=58286 error=0 08:02:21 Received message from Master: op=Filter serial=58287 08:02:21 Color wheel filter change from 0 to 0 08:02:21 FLIGetFilterPos err=0 currentPosition=0 08:02:21 FLIGetStepsRemaining err=0 RemainingSteps=0 08:02:21 Filter is already there-color wheel unchanged 08:02:21 Received message from Master: op=Shutter serial=58288 08:02:21 Shutter LASER close 08:02:21 Received message from Camera: op=State serial=58290 08:02:21 GetSingleValue result=40 Value=cccccccc 08:02:21 SkyScan query 08:02:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:02:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:22 Parameters OK 08:02:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:22 Set A/D data flow result=40 08:02:22 Set A/D channel type result=40 08:02:22 Set A/D encoding result=40 08:02:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:22 Set channel filter=0.000000e+000 result=40 08:02:22 Config A/D Result=40 08:02:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:22 Get A/D filter: -9.255963e+061 result=40 08:02:22 Get A/D value=-858993460 result=40 08:02:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:22 Parameters OK 08:02:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:22 Set A/D data flow result=40 08:02:22 Set A/D channel type result=40 08:02:22 Set A/D encoding result=40 08:02:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:22 Set channel filter=0.000000e+000 result=40 08:02:22 Config A/D Result=40 08:02:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:22 Get A/D filter: -9.255963e+061 result=40 08:02:22 Get A/D value=-858993460 result=40 08:02:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:02:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:02:22 Aux= 08:02:22 Message to Camera, serial 58290 queued 08:02:59 Received message from Master: op=PointingHead serial=58303 08:02:59 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:02:59 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:02:59 Point started: ret=0 08:02:59 point_skyscan result=0 08:03:00 Check angles 08:03:00 SkyScan query 08:03:00 SkyScan query done: ret=0 az=64.245<-4283 ze=66.555<-7563 Statuses=0009 0008 08:03:00 Msec=0 True Az=64.245 Ze=66.555 Az status=0009 Ze status=0008 08:03:00 Check angles 08:03:00 SkyScan query 08:03:01 SkyScan query done: ret=0 az=81.555<-5437 ze=66.495<-7567 Statuses=0009 0008 08:03:01 Msec=750 True Az=81.555 Ze=66.495 Az status=0009 Ze status=0008 08:03:01 Check angles 08:03:01 SkyScan query 08:03:02 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 08:03:02 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 08:03:02 Check angles 08:03:02 SkyScan query 08:03:02 SkyScan query done: ret=0 az=117.165<-7811 ze=66.495<-7567 Statuses=0009 0008 08:03:02 Msec=2250 True Az=117.165 Ze=66.495 Az status=0009 Ze status=0008 08:03:03 Check angles 08:03:03 SkyScan query 08:03:03 SkyScan query done: ret=0 az=134.625<-8975 ze=66.495<-7567 Statuses=0009 0008 08:03:03 Msec=3000 True Az=134.625 Ze=66.495 Az status=0009 Ze status=0008 08:03:03 Check angles 08:03:03 SkyScan query 08:03:04 SkyScan query done: ret=0 az=152.1<-10140 ze=66.495<-7567 Statuses=0009 0008 08:03:04 Msec=3750 True Az=152.1 Ze=66.495 Az status=0009 Ze status=0008 08:03:04 Check angles 08:03:04 SkyScan query 08:03:05 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 08:03:05 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 08:03:05 Message to Master queued w/err=0: serial=58303 error=0 08:03:10 Received message from Master: op=Filter serial=58304 08:03:10 Color wheel filter change from 0 to 0 08:03:10 FLIGetFilterPos err=0 currentPosition=0 08:03:10 FLIGetStepsRemaining err=0 RemainingSteps=0 08:03:10 Filter is already there-color wheel unchanged 08:03:10 Received message from Master: op=Shutter serial=58305 08:03:10 Shutter LASER close 08:03:10 Received message from Camera: op=State serial=58307 08:03:10 GetSingleValue result=40 Value=cccccccc 08:03:10 SkyScan query 08:03:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:03:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:11 Parameters OK 08:03:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:11 Set A/D data flow result=40 08:03:11 Set A/D channel type result=40 08:03:11 Set A/D encoding result=40 08:03:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:11 Set channel filter=0.000000e+000 result=40 08:03:11 Config A/D Result=40 08:03:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:11 Get A/D filter: -9.255963e+061 result=40 08:03:11 Get A/D value=-858993460 result=40 08:03:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:11 Parameters OK 08:03:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:11 Set A/D data flow result=40 08:03:11 Set A/D channel type result=40 08:03:11 Set A/D encoding result=40 08:03:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:11 Set channel filter=0.000000e+000 result=40 08:03:11 Config A/D Result=40 08:03:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:11 Get A/D filter: -9.255963e+061 result=40 08:03:11 Get A/D value=-858993460 result=40 08:03:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:11 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:03:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:03:11 Aux= 08:03:11 Message to Camera, serial 58307 queued 08:03:47 Received message from Master: op=PointingHead serial=58320 08:03:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:03:47 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:03:48 Point started: ret=0 08:03:48 point_skyscan result=0 08:03:48 Check angles 08:03:48 SkyScan query 08:03:49 SkyScan query done: ret=0 az=134.835<-8989 ze=36.6<-9560 Statuses=0009 0009 08:03:49 Msec=0 True Az=134.835 Ze=36.6 Az status=0009 Ze status=0009 08:03:49 Check angles 08:03:49 SkyScan query 08:03:50 SkyScan query done: ret=0 az=117.3<-7820 ze=15.705<-10953 Statuses=0009 0009 08:03:50 Msec=750 True Az=117.3 Ze=15.705 Az status=0009 Ze status=0009 08:03:50 Check angles 08:03:50 SkyScan query 08:03:51 SkyScan query done: ret=0 az=99.93<-6662 ze=-5.31<-12354 Statuses=0009 0009 08:03:51 Msec=1500 True Az=99.93 Ze=-5.31 Az status=0009 Ze status=0009 08:03:51 Check angles 08:03:51 SkyScan query 08:03:51 SkyScan query done: ret=0 az=82.455<-5497 ze=-26.235<-13749 Statuses=0009 0009 08:03:51 Msec=2250 True Az=82.455 Ze=-26.235 Az status=0009 Ze status=0009 08:03:51 Check angles 08:03:51 SkyScan query 08:03:52 SkyScan query done: ret=0 az=65.07<-4338 ze=-38.565<-14571 Statuses=0009 0008 08:03:52 Msec=3000 True Az=65.07 Ze=-38.565 Az status=0009 Ze status=0008 08:03:52 Check angles 08:03:52 SkyScan query 08:03:53 SkyScan query done: ret=0 az=47.61<-3174 ze=-38.535<-14569 Statuses=0009 0008 08:03:53 Msec=3750 True Az=47.61 Ze=-38.535 Az status=0009 Ze status=0008 08:03:53 Check angles 08:03:53 SkyScan query 08:03:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:03:54 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:03:54 Message to Master queued w/err=0: serial=58320 error=0 08:03:59 Received message from Master: op=Filter serial=58321 08:03:59 Color wheel filter change from 0 to 0 08:03:59 FLIGetFilterPos err=0 currentPosition=0 08:03:59 FLIGetStepsRemaining err=0 RemainingSteps=0 08:03:59 Filter is already there-color wheel unchanged 08:03:59 Received message from Master: op=Shutter serial=58322 08:03:59 Shutter LASER close 08:03:59 Received message from Camera: op=State serial=58324 08:03:59 GetSingleValue result=40 Value=cccccccc 08:03:59 SkyScan query 08:03:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:03:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:59 Parameters OK 08:03:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:59 Set A/D data flow result=40 08:03:59 Set A/D channel type result=40 08:03:59 Set A/D encoding result=40 08:03:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:59 Set channel filter=0.000000e+000 result=40 08:03:59 Config A/D Result=40 08:03:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:59 Get A/D filter: -9.255963e+061 result=40 08:03:59 Get A/D value=-858993460 result=40 08:03:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:59 Parameters OK 08:03:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:59 Set A/D data flow result=40 08:03:59 Set A/D channel type result=40 08:03:59 Set A/D encoding result=40 08:03:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:59 Set channel filter=0.000000e+000 result=40 08:03:59 Config A/D Result=40 08:03:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:59 Get A/D filter: -9.255963e+061 result=40 08:03:59 Get A/D value=-858993460 result=40 08:03:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:03:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:03:59 Aux= 08:03:59 Message to Camera, serial 58324 queued 08:04:36 Received message from Master: op=PointingHead serial=58337 08:04:36 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:04:36 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:04:36 Point started: ret=0 08:04:37 point_skyscan result=0 08:04:37 Check angles 08:04:37 SkyScan query 08:04:38 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.4<-16560 Statuses=0009 0009 08:04:38 Msec=0 True Az=64.23 Ze=-68.4 Az status=0009 Ze status=0009 08:04:38 Check angles 08:04:38 SkyScan query 08:04:39 SkyScan query done: ret=0 az=81.51<-5434 ze=-89.385<-17959 Statuses=0009 0009 08:04:39 Msec=750 True Az=81.51 Ze=-89.385 Az status=0009 Ze status=0009 08:04:39 Check angles 08:04:39 SkyScan query 08:04:39 SkyScan query done: ret=0 az=99.705<-6647 ze=-110.79<-19386 Statuses=0009 0009 08:04:39 Msec=1500 True Az=99.705 Ze=-110.79 Az status=0009 Ze status=0009 08:04:40 Check angles 08:04:40 SkyScan query 08:04:40 SkyScan query done: ret=0 az=117.075<-7805 ze=-131.715<-20781 Statuses=0009 0009 08:04:40 Msec=2250 True Az=117.075 Ze=-131.715 Az status=0009 Ze status=0009 08:04:40 Check angles 08:04:40 SkyScan query 08:04:41 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 08:04:41 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 08:04:41 Check angles 08:04:41 SkyScan query 08:04:42 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:04:42 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:04:42 Message to Master queued w/err=0: serial=58337 error=0 08:04:47 Received message from Master: op=Filter serial=58338 08:04:47 Color wheel filter change from 0 to 0 08:04:47 FLIGetFilterPos err=0 currentPosition=0 08:04:47 FLIGetStepsRemaining err=0 RemainingSteps=0 08:04:47 Filter is already there-color wheel unchanged 08:04:47 Received message from Master: op=Shutter serial=58339 08:04:47 Shutter LASER close 08:04:47 Received message from Camera: op=State serial=58341 08:04:47 GetSingleValue result=40 Value=cccccccc 08:04:47 SkyScan query 08:04:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:04:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:47 Parameters OK 08:04:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:47 Set A/D data flow result=40 08:04:47 Set A/D channel type result=40 08:04:47 Set A/D encoding result=40 08:04:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:47 Set channel filter=0.000000e+000 result=40 08:04:47 Config A/D Result=40 08:04:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:47 Get A/D filter: -9.255963e+061 result=40 08:04:47 Get A/D value=-858993460 result=40 08:04:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:47 Parameters OK 08:04:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:47 Set A/D data flow result=40 08:04:47 Set A/D channel type result=40 08:04:47 Set A/D encoding result=40 08:04:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:47 Set channel filter=0.000000e+000 result=40 08:04:47 Config A/D Result=40 08:04:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:47 Get A/D filter: -9.255963e+061 result=40 08:04:47 Get A/D value=-858993460 result=40 08:04:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:04:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:04:47 Aux= 08:04:47 Message to Camera, serial 58341 queued 08:05:24 Received message from Master: op=PointingHead serial=58354 08:05:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:05:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:05:25 Point started: ret=0 08:05:25 point_skyscan result=0 08:05:25 Check angles 08:05:25 SkyScan query 08:05:26 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.165<-23411 Statuses=0009 0009 08:05:26 Msec=0 True Az=113.01 Ze=-171.165 Az status=0009 Ze status=0009 08:05:26 Check angles 08:05:26 SkyScan query 08:05:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:05:27 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:05:27 Message to Master queued w/err=0: serial=58354 error=0 08:05:32 Received message from Master: op=Filter serial=58355 08:05:32 Color wheel filter change from 0 to 0 08:05:32 FLIGetFilterPos err=0 currentPosition=0 08:05:32 FLIGetStepsRemaining err=0 RemainingSteps=0 08:05:32 Filter is already there-color wheel unchanged 08:05:32 Received message from Master: op=Shutter serial=58356 08:05:32 Shutter LASER open 08:05:32 Received message from Camera: op=State serial=58358 08:05:32 GetSingleValue result=40 Value=cccccccc 08:05:32 SkyScan query 08:05:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:05:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:33 Parameters OK 08:05:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:33 Set A/D data flow result=40 08:05:33 Set A/D channel type result=40 08:05:33 Set A/D encoding result=40 08:05:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:33 Set channel filter=0.000000e+000 result=40 08:05:33 Config A/D Result=40 08:05:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:33 Get A/D filter: -9.255963e+061 result=40 08:05:33 Get A/D value=-858993460 result=40 08:05:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:33 Parameters OK 08:05:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:33 Set A/D data flow result=40 08:05:33 Set A/D channel type result=40 08:05:33 Set A/D encoding result=40 08:05:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:33 Set channel filter=0.000000e+000 result=40 08:05:33 Config A/D Result=40 08:05:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:33 Get A/D filter: -9.255963e+061 result=40 08:05:33 Get A/D value=-858993460 result=40 08:05:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:05:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:05:33 Aux= 08:05:33 Message to Camera, serial 58358 queued 08:05:41 Received message from Master: op=Shutter serial=58368 08:05:41 Shutter LASER close 08:05:42 Received message from Master: op=PointingHead serial=58372 08:05:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:05:42 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:05:42 Point started: ret=0 08:05:42 point_skyscan result=0 08:05:43 Check angles 08:05:43 SkyScan query 08:05:43 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.22<-21548 Statuses=0009 0009 08:05:43 Msec=0 True Az=135.96 Ze=-143.22 Az status=0009 Ze status=0009 08:05:44 Check angles 08:05:44 SkyScan query [UTC 2018-12-11 08:05:44] 08:05:44 SkyScan query done: ret=0 az=153.6<-10240 ze=-122.235<-20149 Statuses=0009 0009 08:05:44 Msec=750 True Az=153.6 Ze=-122.235 Az status=0009 Ze status=0009 08:05:44 Check angles 08:05:44 SkyScan query 08:05:45 SkyScan query done: ret=0 az=170.955<-11397 ze=-101.37<-18758 Statuses=0009 0009 08:05:45 Msec=1500 True Az=170.955 Ze=-101.37 Az status=0009 Ze status=0009 08:05:45 Check angles 08:05:45 SkyScan query 08:05:46 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.34<-17356 Statuses=0008 0009 08:05:46 Msec=2250 True Az=176.025 Ze=-80.34 Az status=0008 Ze status=0009 08:05:46 Check angles 08:05:46 SkyScan query 08:05:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.415<-15961 Statuses=0008 0009 08:05:46 Msec=3000 True Az=175.995 Ze=-59.415 Az status=0008 Ze status=0009 08:05:47 Check angles 08:05:47 SkyScan query 08:05:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:05:47 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:05:47 Message to Master queued w/err=0: serial=58372 error=0 08:05:52 Received message from Master: op=Filter serial=58373 08:05:52 Color wheel filter change from 0 to 0 08:05:52 FLIGetFilterPos err=0 currentPosition=0 08:05:52 FLIGetStepsRemaining err=0 RemainingSteps=0 08:05:52 Filter is already there-color wheel unchanged 08:05:52 Received message from Master: op=Shutter serial=58374 08:05:52 Shutter LASER close 08:05:52 Received message from Camera: op=State serial=58376 08:05:52 GetSingleValue result=40 Value=cccccccc 08:05:52 SkyScan query 08:05:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:05:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:53 Parameters OK 08:05:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:53 Set A/D data flow result=40 08:05:53 Set A/D channel type result=40 08:05:53 Set A/D encoding result=40 08:05:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:53 Set channel filter=0.000000e+000 result=40 08:05:53 Config A/D Result=40 08:05:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:53 Get A/D filter: -9.255963e+061 result=40 08:05:53 Get A/D value=-858993460 result=40 08:05:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:53 Parameters OK 08:05:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:53 Set A/D data flow result=40 08:05:53 Set A/D channel type result=40 08:05:53 Set A/D encoding result=40 08:05:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:53 Set channel filter=0.000000e+000 result=40 08:05:53 Config A/D Result=40 08:05:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:53 Get A/D filter: -9.255963e+061 result=40 08:05:53 Get A/D value=-858993460 result=40 08:05:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:05:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:05:53 Aux= 08:05:53 Message to Camera, serial 58376 queued 08:06:30 Received message from Master: op=PointingHead serial=58389 08:06:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:06:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:06:30 Point started: ret=0 08:06:30 point_skyscan result=0 08:06:31 Check angles 08:06:31 SkyScan query 08:06:31 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.78<-13452 Statuses=0009 0009 08:06:31 Msec=0 True Az=152.985 Ze=-21.78 Az status=0009 Ze status=0009 08:06:32 Check angles 08:06:32 SkyScan query 08:06:32 SkyScan query done: ret=0 az=135.225<-9015 ze=-0.33<-12022 Statuses=0009 0009 08:06:32 Msec=750 True Az=135.225 Ze=-0.33 Az status=0009 Ze status=0009 08:06:32 Check angles 08:06:32 SkyScan query 08:06:33 SkyScan query done: ret=0 az=117.195<-7813 ze=21.06<-10596 Statuses=0009 0009 08:06:33 Msec=1500 True Az=117.195 Ze=21.06 Az status=0009 Ze status=0009 08:06:33 Check angles 08:06:33 SkyScan query 08:06:34 SkyScan query done: ret=0 az=99.885<-6659 ze=41.985<-9201 Statuses=0009 0009 08:06:34 Msec=2250 True Az=99.885 Ze=41.985 Az status=0009 Ze status=0009 08:06:34 Check angles 08:06:34 SkyScan query 08:06:35 SkyScan query done: ret=0 az=86.07<-5738 ze=51.555<-8563 Statuses=0009 0008 08:06:35 Msec=3000 True Az=86.07 Ze=51.555 Az status=0009 Ze status=0008 08:06:35 Check angles 08:06:35 SkyScan query 08:06:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:06:35 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:06:35 Message to Master queued w/err=0: serial=58389 error=0 08:06:40 Received message from Master: op=Filter serial=58390 08:06:40 Color wheel filter change from 0 to 0 08:06:40 FLIGetFilterPos err=0 currentPosition=0 08:06:40 FLIGetStepsRemaining err=0 RemainingSteps=0 08:06:40 Filter is already there-color wheel unchanged 08:06:40 Received message from Master: op=Shutter serial=58391 08:06:40 Shutter LASER close 08:06:41 Received message from Camera: op=State serial=58393 08:06:41 GetSingleValue result=40 Value=cccccccc 08:06:41 SkyScan query 08:06:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:06:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:41 Parameters OK 08:06:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:41 Set A/D data flow result=40 08:06:41 Set A/D channel type result=40 08:06:41 Set A/D encoding result=40 08:06:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:41 Set channel filter=0.000000e+000 result=40 08:06:41 Config A/D Result=40 08:06:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:41 Get A/D filter: -9.255963e+061 result=40 08:06:41 Get A/D value=-858993460 result=40 08:06:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:41 Parameters OK 08:06:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:41 Set A/D data flow result=40 08:06:41 Set A/D channel type result=40 08:06:41 Set A/D encoding result=40 08:06:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:41 Set channel filter=0.000000e+000 result=40 08:06:41 Config A/D Result=40 08:06:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:41 Get A/D filter: -9.255963e+061 result=40 08:06:41 Get A/D value=-858993460 result=40 08:06:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:06:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:06:41 Aux= 08:06:41 Message to Camera, serial 58393 queued 08:07:18 Received message from Master: op=PointingHead serial=58406 08:07:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:07:18 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:07:18 Point started: ret=0 08:07:18 point_skyscan result=0 08:07:19 Check angles 08:07:19 SkyScan query 08:07:20 SkyScan query done: ret=0 az=108.945<-7263 ze=38.49<-9434 Statuses=0009 0008 08:07:20 Msec=0 True Az=108.945 Ze=38.49 Az status=0009 Ze status=0008 08:07:20 Check angles 08:07:20 SkyScan query 08:07:20 SkyScan query done: ret=0 az=126.495<-8433 ze=38.505<-9433 Statuses=0009 0008 08:07:20 Msec=750 True Az=126.495 Ze=38.505 Az status=0009 Ze status=0008 08:07:21 Check angles 08:07:21 SkyScan query 08:07:21 SkyScan query done: ret=0 az=143.955<-9597 ze=38.505<-9433 Statuses=0009 0008 08:07:21 Msec=1500 True Az=143.955 Ze=38.505 Az status=0009 Ze status=0008 08:07:21 Check angles 08:07:21 SkyScan query 08:07:22 SkyScan query done: ret=0 az=161.355<-10757 ze=38.505<-9433 Statuses=0009 0008 08:07:22 Msec=2250 True Az=161.355 Ze=38.505 Az status=0009 Ze status=0008 08:07:22 Check angles 08:07:22 SkyScan query 08:07:23 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 08:07:23 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 08:07:23 Check angles 08:07:23 SkyScan query 08:07:23 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:07:23 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:07:23 Message to Master queued w/err=0: serial=58406 error=0 08:07:28 Received message from Master: op=Filter serial=58407 08:07:28 Color wheel filter change from 0 to 0 08:07:28 FLIGetFilterPos err=0 currentPosition=0 08:07:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:07:28 Filter is already there-color wheel unchanged 08:07:29 Received message from Master: op=Shutter serial=58408 08:07:29 Shutter LASER close 08:07:29 Received message from Camera: op=State serial=58410 08:07:29 GetSingleValue result=40 Value=cccccccc 08:07:29 SkyScan query 08:07:29 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:07:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:29 Parameters OK 08:07:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:29 Set A/D data flow result=40 08:07:29 Set A/D channel type result=40 08:07:29 Set A/D encoding result=40 08:07:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:29 Set channel filter=0.000000e+000 result=40 08:07:29 Config A/D Result=40 08:07:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:29 Get A/D filter: -9.255963e+061 result=40 08:07:29 Get A/D value=-858993460 result=40 08:07:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:29 Parameters OK 08:07:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:29 Set A/D data flow result=40 08:07:29 Set A/D channel type result=40 08:07:29 Set A/D encoding result=40 08:07:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:29 Set channel filter=0.000000e+000 result=40 08:07:29 Config A/D Result=40 08:07:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:29 Get A/D filter: -9.255963e+061 result=40 08:07:29 Get A/D value=-858993460 result=40 08:07:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:07:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:07:29 Aux= 08:07:29 Message to Camera, serial 58410 queued 08:08:06 Received message from Master: op=PointingHead serial=58423 08:08:06 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:08:06 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:08:06 Point started: ret=0 08:08:06 point_skyscan result=0 08:08:07 Check angles 08:08:07 SkyScan query 08:08:08 SkyScan query done: ret=0 az=152.985<-10199 ze=8.76<-11416 Statuses=0009 0009 08:08:08 Msec=0 True Az=152.985 Ze=8.76 Az status=0009 Ze status=0009 08:08:08 Check angles 08:08:08 SkyScan query 08:08:08 SkyScan query done: ret=0 az=135.495<-9033 ze=-12.18<-12812 Statuses=0009 0009 08:08:08 Msec=750 True Az=135.495 Ze=-12.18 Az status=0009 Ze status=0009 08:08:09 Check angles 08:08:09 SkyScan query 08:08:09 SkyScan query done: ret=0 az=117.96<-7864 ze=-33.105<-14207 Statuses=0009 0009 08:08:09 Msec=1500 True Az=117.96 Ze=-33.105 Az status=0009 Ze status=0009 08:08:09 Check angles 08:08:09 SkyScan query 08:08:10 SkyScan query done: ret=0 az=100.485<-6699 ze=-51.525<-15435 Statuses=0009 0009 08:08:10 Msec=2250 True Az=100.485 Ze=-51.525 Az status=0009 Ze status=0009 08:08:10 Check angles 08:08:10 SkyScan query 08:08:11 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 08:08:11 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 08:08:11 Check angles 08:08:11 SkyScan query 08:08:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:08:11 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:08:11 Message to Master queued w/err=0: serial=58423 error=0 08:08:16 Received message from Master: op=Filter serial=58424 08:08:16 Color wheel filter change from 0 to 0 08:08:16 FLIGetFilterPos err=0 currentPosition=0 08:08:16 FLIGetStepsRemaining err=0 RemainingSteps=0 08:08:16 Filter is already there-color wheel unchanged 08:08:17 Received message from Master: op=Shutter serial=58425 08:08:17 Shutter LASER close 08:08:17 Received message from Camera: op=State serial=58427 08:08:17 GetSingleValue result=40 Value=cccccccc 08:08:17 SkyScan query 08:08:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:08:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:17 Parameters OK 08:08:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:17 Set A/D data flow result=40 08:08:17 Set A/D channel type result=40 08:08:17 Set A/D encoding result=40 08:08:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:17 Set channel filter=0.000000e+000 result=40 08:08:17 Config A/D Result=40 08:08:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:17 Get A/D filter: -9.255963e+061 result=40 08:08:17 Get A/D value=-858993460 result=40 08:08:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:17 Parameters OK 08:08:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:17 Set A/D data flow result=40 08:08:17 Set A/D channel type result=40 08:08:17 Set A/D encoding result=40 08:08:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:17 Set channel filter=0.000000e+000 result=40 08:08:17 Config A/D Result=40 08:08:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:17 Get A/D filter: -9.255963e+061 result=40 08:08:17 Get A/D value=-858993460 result=40 08:08:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:08:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:08:17 Aux= 08:08:17 Message to Camera, serial 58427 queued 08:08:54 Received message from Master: op=PointingHead serial=58440 08:08:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:08:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:08:54 Point started: ret=0 08:08:54 point_skyscan result=0 08:08:55 Check angles 08:08:55 SkyScan query 08:08:56 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.18<-17412 Statuses=0009 0009 08:08:56 Msec=0 True Az=108.93 Ze=-81.18 Az status=0009 Ze status=0009 08:08:56 Check angles 08:08:56 SkyScan query 08:08:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.135<-18809 Statuses=0008 0009 08:08:57 Msec=750 True Az=112.995 Ze=-102.135 Az status=0008 Ze status=0009 08:08:57 Check angles 08:08:57 SkyScan query 08:08:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.105<-20207 Statuses=0008 0009 08:08:57 Msec=1500 True Az=112.995 Ze=-123.105 Az status=0008 Ze status=0009 08:08:57 Check angles 08:08:57 SkyScan query 08:08:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.06<-21604 Statuses=0008 0009 08:08:58 Msec=2250 True Az=112.995 Ze=-144.06 Az status=0008 Ze status=0009 08:08:58 Check angles 08:08:58 SkyScan query 08:08:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.015<-23001 Statuses=0008 0009 08:08:59 Msec=3000 True Az=112.995 Ze=-165.015 Az status=0008 Ze status=0009 08:08:59 Check angles 08:08:59 SkyScan query 08:09:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:09:00 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:09:00 Message to Master queued w/err=0: serial=58440 error=0 08:09:05 Received message from Master: op=Filter serial=58441 08:09:05 Color wheel filter change from 0 to 0 08:09:05 FLIGetFilterPos err=0 currentPosition=0 08:09:05 FLIGetStepsRemaining err=0 RemainingSteps=0 08:09:05 Filter is already there-color wheel unchanged 08:09:05 Received message from Master: op=Shutter serial=58442 08:09:05 Shutter LASER open 08:09:05 Received message from Camera: op=State serial=58444 08:09:05 GetSingleValue result=40 Value=cccccccc 08:09:05 SkyScan query 08:09:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:09:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:05 Parameters OK 08:09:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:05 Set A/D data flow result=40 08:09:05 Set A/D channel type result=40 08:09:05 Set A/D encoding result=40 08:09:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:05 Set channel filter=0.000000e+000 result=40 08:09:05 Config A/D Result=40 08:09:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:05 Get A/D filter: -9.255963e+061 result=40 08:09:05 Get A/D value=-858993460 result=40 08:09:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:05 Parameters OK 08:09:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:05 Set A/D data flow result=40 08:09:05 Set A/D channel type result=40 08:09:05 Set A/D encoding result=40 08:09:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:05 Set channel filter=0.000000e+000 result=40 08:09:05 Config A/D Result=40 08:09:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:05 Get A/D filter: -9.255963e+061 result=40 08:09:05 Get A/D value=-858993460 result=40 08:09:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:09:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:09:05 Aux= 08:09:05 Message to Camera, serial 58444 queued 08:09:14 Received message from Master: op=Shutter serial=58454 08:09:14 Shutter LASER close 08:09:14 Received message from Master: op=PointingHead serial=58458 08:09:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:09:14 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:09:15 Point started: ret=0 08:09:15 point_skyscan result=0 08:09:15 Check angles 08:09:15 SkyScan query 08:09:16 SkyScan query done: ret=0 az=89.895<-5993 ze=157.305<-1513 Statuses=0009 0009 08:09:16 Msec=0 True Az=89.895 Ze=157.305 Az status=0009 Ze status=0009 08:09:16 Check angles 08:09:16 SkyScan query 08:09:17 SkyScan query done: ret=0 az=72.06<-4804 ze=135.915<-2939 Statuses=0009 0009 08:09:17 Msec=750 True Az=72.06 Ze=135.915 Az status=0009 Ze status=0009 08:09:17 Check angles 08:09:17 SkyScan query 08:09:18 SkyScan query done: ret=0 az=54.84<-3656 ze=114.96<-4336 Statuses=0009 0009 08:09:18 Msec=1500 True Az=54.84 Ze=114.96 Az status=0009 Ze status=0009 08:09:18 Check angles 08:09:18 SkyScan query 08:09:18 SkyScan query done: ret=0 az=40.89<-2726 ze=93.99<-5734 Statuses=0009 0009 08:09:18 Msec=2250 True Az=40.89 Ze=93.99 Az status=0009 Ze status=0009 08:09:18 Check angles 08:09:18 SkyScan query 08:09:19 SkyScan query done: ret=0 az=40.995<-2733 ze=73.035<-7131 Statuses=0008 0009 08:09:19 Msec=3000 True Az=40.995 Ze=73.035 Az status=0008 Ze status=0009 08:09:19 Check angles 08:09:19 SkyScan query 08:09:20 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 08:09:20 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 08:09:20 Check angles 08:09:20 SkyScan query 08:09:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:09:21 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:09:21 Message to Master queued w/err=0: serial=58458 error=0 08:09:26 Received message from Master: op=Filter serial=58459 08:09:26 Color wheel filter change from 0 to 0 08:09:26 FLIGetFilterPos err=0 currentPosition=0 08:09:26 FLIGetStepsRemaining err=0 RemainingSteps=0 08:09:26 Filter is already there-color wheel unchanged 08:09:26 Received message from Master: op=Shutter serial=58460 08:09:26 Shutter LASER close 08:09:26 Received message from Camera: op=State serial=58462 08:09:26 GetSingleValue result=40 Value=cccccccc 08:09:26 SkyScan query 08:09:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:09:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:26 Parameters OK 08:09:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:26 Set A/D data flow result=40 08:09:26 Set A/D channel type result=40 08:09:26 Set A/D encoding result=40 08:09:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:26 Set channel filter=0.000000e+000 result=40 08:09:26 Config A/D Result=40 08:09:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:26 Get A/D filter: -9.255963e+061 result=40 08:09:26 Get A/D value=-858993460 result=40 08:09:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:26 Parameters OK 08:09:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:26 Set A/D data flow result=40 08:09:26 Set A/D channel type result=40 08:09:26 Set A/D encoding result=40 08:09:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:26 Set channel filter=0.000000e+000 result=40 08:09:26 Config A/D Result=40 08:09:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:26 Get A/D filter: -9.255963e+061 result=40 08:09:26 Get A/D value=-858993460 result=40 08:09:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:09:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:09:26 Aux= 08:09:26 Message to Camera, serial 58462 queued 08:10:03 Received message from Master: op=PointingHead serial=58475 08:10:03 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:10:03 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:10:04 Point started: ret=0 08:10:04 point_skyscan result=0 08:10:04 Check angles 08:10:04 SkyScan query 08:10:05 SkyScan query done: ret=0 az=64.275<-4285 ze=66.555<-7563 Statuses=0009 0008 08:10:05 Msec=0 True Az=64.275 Ze=66.555 Az status=0009 Ze status=0008 08:10:05 Check angles 08:10:05 SkyScan query 08:10:06 SkyScan query done: ret=0 az=81.645<-5443 ze=66.495<-7567 Statuses=0009 0008 08:10:06 Msec=750 True Az=81.645 Ze=66.495 Az status=0009 Ze status=0008 08:10:06 Check angles 08:10:06 SkyScan query 08:10:06 SkyScan query done: ret=0 az=99.705<-6647 ze=66.495<-7567 Statuses=0009 0008 08:10:06 Msec=1500 True Az=99.705 Ze=66.495 Az status=0009 Ze status=0008 08:10:07 Check angles 08:10:07 SkyScan query 08:10:07 SkyScan query done: ret=0 az=117.18<-7812 ze=66.495<-7567 Statuses=0009 0008 08:10:07 Msec=2250 True Az=117.18 Ze=66.495 Az status=0009 Ze status=0008 08:10:07 Check angles 08:10:07 SkyScan query 08:10:08 SkyScan query done: ret=0 az=134.595<-8973 ze=66.495<-7567 Statuses=0009 0008 08:10:08 Msec=3000 True Az=134.595 Ze=66.495 Az status=0009 Ze status=0008 08:10:08 Check angles 08:10:08 SkyScan query 08:10:09 SkyScan query done: ret=0 az=152.1<-10140 ze=66.495<-7567 Statuses=0009 0008 08:10:09 Msec=3750 True Az=152.1 Ze=66.495 Az status=0009 Ze status=0008 08:10:09 Check angles 08:10:09 SkyScan query 08:10:09 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:10:09 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 08:10:09 Message to Master queued w/err=0: serial=58475 error=0 08:10:14 Received message from Master: op=Filter serial=58476 08:10:14 Color wheel filter change from 0 to 0 08:10:14 FLIGetFilterPos err=0 currentPosition=0 08:10:14 FLIGetStepsRemaining err=0 RemainingSteps=0 08:10:14 Filter is already there-color wheel unchanged 08:10:15 Received message from Master: op=Shutter serial=58477 08:10:15 Shutter LASER close 08:10:15 Received message from Camera: op=State serial=58479 08:10:15 GetSingleValue result=40 Value=cccccccc 08:10:15 SkyScan query 08:10:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:10:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:15 Parameters OK 08:10:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:15 Set A/D data flow result=40 08:10:15 Set A/D channel type result=40 08:10:15 Set A/D encoding result=40 08:10:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:15 Set channel filter=0.000000e+000 result=40 08:10:15 Config A/D Result=40 08:10:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:15 Get A/D filter: -9.255963e+061 result=40 08:10:15 Get A/D value=-858993460 result=40 08:10:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:15 Parameters OK 08:10:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:15 Set A/D data flow result=40 08:10:15 Set A/D channel type result=40 08:10:15 Set A/D encoding result=40 08:10:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:15 Set channel filter=0.000000e+000 result=40 08:10:15 Config A/D Result=40 08:10:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:15 Get A/D filter: -9.255963e+061 result=40 08:10:15 Get A/D value=-858993460 result=40 08:10:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:15 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:10:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:10:15 Aux= 08:10:15 Message to Camera, serial 58479 queued 08:10:53 Received message from Master: op=PointingHead serial=58492 08:10:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:10:53 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:10:53 Point started: ret=0 08:10:53 point_skyscan result=0 08:10:54 Check angles 08:10:54 SkyScan query 08:10:54 SkyScan query done: ret=0 az=134.565<-8971 ze=36.375<-9575 Statuses=0009 0009 08:10:54 Msec=0 True Az=134.565 Ze=36.375 Az status=0009 Ze status=0009 08:10:54 Check angles 08:10:54 SkyScan query 08:10:55 SkyScan query done: ret=0 az=117.21<-7814 ze=15.435<-10971 Statuses=0009 0009 08:10:55 Msec=750 True Az=117.21 Ze=15.435 Az status=0009 Ze status=0009 08:10:55 Check angles 08:10:55 SkyScan query 08:10:56 SkyScan query done: ret=0 az=99.84<-6656 ze=-5.535<-12369 Statuses=0009 0009 08:10:56 Msec=1500 True Az=99.84 Ze=-5.535 Az status=0009 Ze status=0009 08:10:56 Check angles 08:10:56 SkyScan query 08:10:57 SkyScan query done: ret=0 az=82.02<-5468 ze=-26.955<-13797 Statuses=0009 0009 08:10:57 Msec=2250 True Az=82.02 Ze=-26.955 Az status=0009 Ze status=0009 08:10:57 Check angles 08:10:57 SkyScan query 08:10:57 SkyScan query done: ret=0 az=64.395<-4293 ze=-38.58<-14572 Statuses=0009 0008 08:10:57 Msec=3000 True Az=64.395 Ze=-38.58 Az status=0009 Ze status=0008 08:10:57 Check angles 08:10:57 SkyScan query 08:10:58 SkyScan query done: ret=0 az=46.86<-3124 ze=-38.52<-14568 Statuses=0009 0008 08:10:58 Msec=3750 True Az=46.86 Ze=-38.52 Az status=0009 Ze status=0008 08:10:58 Check angles 08:10:58 SkyScan query 08:10:59 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 08:10:59 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 08:10:59 Message to Master queued w/err=0: serial=58492 error=0 08:11:04 Received message from Master: op=Filter serial=58493 08:11:04 Color wheel filter change from 0 to 0 08:11:04 FLIGetFilterPos err=0 currentPosition=0 08:11:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:11:04 Filter is already there-color wheel unchanged 08:11:04 Received message from Master: op=Shutter serial=58494 08:11:04 Shutter LASER close 08:11:04 Received message from Camera: op=State serial=58496 08:11:04 GetSingleValue result=40 Value=cccccccc 08:11:04 SkyScan query 08:11:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:11:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:05 Parameters OK 08:11:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:05 Set A/D data flow result=40 08:11:05 Set A/D channel type result=40 08:11:05 Set A/D encoding result=40 08:11:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:05 Set channel filter=0.000000e+000 result=40 08:11:05 Config A/D Result=40 08:11:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:05 Get A/D filter: -9.255963e+061 result=40 08:11:05 Get A/D value=-858993460 result=40 08:11:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:05 Parameters OK 08:11:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:05 Set A/D data flow result=40 08:11:05 Set A/D channel type result=40 08:11:05 Set A/D encoding result=40 08:11:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:05 Set channel filter=0.000000e+000 result=40 08:11:05 Config A/D Result=40 08:11:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:05 Get A/D filter: -9.255963e+061 result=40 08:11:05 Get A/D value=-858993460 result=40 08:11:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:11:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:11:05 Aux= 08:11:05 Message to Camera, serial 58496 queued 08:11:41 Received message from Master: op=PointingHead serial=58509 08:11:41 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:11:41 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:11:42 Point started: ret=0 08:11:42 point_skyscan result=0 08:11:43 Check angles 08:11:43 SkyScan query 08:11:43 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.595<-16573 Statuses=0009 0009 08:11:43 Msec=0 True Az=64.17 Ze=-68.595 Az status=0009 Ze status=0009 08:11:43 Check angles 08:11:43 SkyScan query 08:11:44 SkyScan query done: ret=0 az=81.78<-5452 ze=-89.565<-17971 Statuses=0009 0009 08:11:44 Msec=750 True Az=81.78 Ze=-89.565 Az status=0009 Ze status=0009 08:11:44 Check angles 08:11:44 SkyScan query 08:11:45 SkyScan query done: ret=0 az=99.255<-6617 ze=-110.535<-19369 Statuses=0009 0009 08:11:45 Msec=1500 True Az=99.255 Ze=-110.535 Az status=0009 Ze status=0009 08:11:45 Check angles 08:11:45 SkyScan query 08:11:45 SkyScan query done: ret=0 az=117.105<-7807 ze=-131.94<-20796 Statuses=0009 0009 08:11:45 Msec=2250 True Az=117.105 Ze=-131.94 Az status=0009 Ze status=0009 08:11:46 Check angles 08:11:46 SkyScan query 08:11:46 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 08:11:46 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 08:11:46 Check angles 08:11:46 SkyScan query 08:11:47 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:11:47 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:11:47 Message to Master queued w/err=0: serial=58509 error=0 08:11:52 Received message from Master: op=Filter serial=58510 08:11:52 Color wheel filter change from 0 to 0 08:11:52 FLIGetFilterPos err=0 currentPosition=0 08:11:52 FLIGetStepsRemaining err=0 RemainingSteps=0 08:11:52 Filter is already there-color wheel unchanged 08:11:52 Received message from Master: op=Shutter serial=58511 08:11:52 Shutter LASER close 08:11:52 Received message from Camera: op=State serial=58513 08:11:52 GetSingleValue result=40 Value=cccccccc 08:11:52 SkyScan query 08:11:53 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:11:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:53 Parameters OK 08:11:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:53 Set A/D data flow result=40 08:11:53 Set A/D channel type result=40 08:11:53 Set A/D encoding result=40 08:11:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:53 Set channel filter=0.000000e+000 result=40 08:11:53 Config A/D Result=40 08:11:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:53 Get A/D filter: -9.255963e+061 result=40 08:11:53 Get A/D value=-858993460 result=40 08:11:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:53 Parameters OK 08:11:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:53 Set A/D data flow result=40 08:11:53 Set A/D channel type result=40 08:11:53 Set A/D encoding result=40 08:11:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:53 Set channel filter=0.000000e+000 result=40 08:11:53 Config A/D Result=40 08:11:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:53 Get A/D filter: -9.255963e+061 result=40 08:11:53 Get A/D value=-858993460 result=40 08:11:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:53 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:11:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:11:53 Aux= 08:11:53 Message to Camera, serial 58513 queued 08:12:29 Received message from Master: op=PointingHead serial=58525 08:12:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:12:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:12:29 Point started: ret=0 08:12:29 point_skyscan result=0 08:12:30 Check angles 08:12:30 SkyScan query 08:12:30 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 08:12:30 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 08:12:30 Check angles 08:12:30 SkyScan query 08:12:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:12:31 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:12:31 Message to Master queued w/err=0: serial=58525 error=0 08:12:36 Received message from Master: op=Filter serial=58526 08:12:36 Color wheel filter change from 0 to 0 08:12:36 FLIGetFilterPos err=0 currentPosition=0 08:12:36 FLIGetStepsRemaining err=0 RemainingSteps=0 08:12:36 Filter is already there-color wheel unchanged 08:12:36 Received message from Master: op=Shutter serial=58527 08:12:36 Shutter LASER open 08:12:36 Received message from Camera: op=State serial=58529 08:12:36 GetSingleValue result=40 Value=cccccccc 08:12:36 SkyScan query 08:12:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:12:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:37 Parameters OK 08:12:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:37 Set A/D data flow result=40 08:12:37 Set A/D channel type result=40 08:12:37 Set A/D encoding result=40 08:12:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:37 Set channel filter=0.000000e+000 result=40 08:12:37 Config A/D Result=40 08:12:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:37 Get A/D filter: -9.255963e+061 result=40 08:12:37 Get A/D value=-858993460 result=40 08:12:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:37 Parameters OK 08:12:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:37 Set A/D data flow result=40 08:12:37 Set A/D channel type result=40 08:12:37 Set A/D encoding result=40 08:12:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:37 Set channel filter=0.000000e+000 result=40 08:12:37 Config A/D Result=40 08:12:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:37 Get A/D filter: -9.255963e+061 result=40 08:12:37 Get A/D value=-858993460 result=40 08:12:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:12:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:12:37 Aux= 08:12:37 Message to Camera, serial 58529 queued 08:12:45 Received message from Master: op=Shutter serial=58539 08:12:45 Shutter LASER close 08:12:46 Received message from Master: op=PointingHead serial=58543 08:12:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:12:46 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:12:46 Point started: ret=0 08:12:46 point_skyscan result=0 08:12:47 Check angles 08:12:47 SkyScan query 08:12:48 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.43<-21562 Statuses=0009 0009 08:12:48 Msec=0 True Az=135.945 Ze=-143.43 Az status=0009 Ze status=0009 08:12:48 Check angles 08:12:48 SkyScan query 08:12:48 SkyScan query done: ret=0 az=153.39<-10226 ze=-122.46<-20164 Statuses=0009 0009 08:12:48 Msec=750 True Az=153.39 Ze=-122.46 Az status=0009 Ze status=0009 08:12:49 Check angles 08:12:49 SkyScan query 08:12:49 SkyScan query done: ret=0 az=170.805<-11387 ze=-101.55<-18770 Statuses=0009 0009 08:12:49 Msec=1500 True Az=170.805 Ze=-101.55 Az status=0009 Ze status=0009 08:12:49 Check angles 08:12:49 SkyScan query 08:12:50 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.535<-17369 Statuses=0008 0009 08:12:50 Msec=2250 True Az=176.025 Ze=-80.535 Az status=0008 Ze status=0009 08:12:50 Check angles 08:12:50 SkyScan query 08:12:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.61<-15974 Statuses=0008 0009 08:12:51 Msec=3000 True Az=175.995 Ze=-59.61 Az status=0008 Ze status=0009 08:12:51 Check angles 08:12:51 SkyScan query 08:12:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:12:51 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:12:51 Message to Master queued w/err=0: serial=58543 error=0 08:12:56 Received message from Master: op=Filter serial=58544 08:12:56 Color wheel filter change from 0 to 0 08:12:56 FLIGetFilterPos err=0 currentPosition=0 08:12:56 FLIGetStepsRemaining err=0 RemainingSteps=0 08:12:56 Filter is already there-color wheel unchanged 08:12:57 Received message from Master: op=Shutter serial=58545 08:12:57 Shutter LASER close 08:12:57 Received message from Camera: op=State serial=58547 08:12:57 GetSingleValue result=40 Value=cccccccc 08:12:57 SkyScan query 08:12:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:12:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:57 Parameters OK 08:12:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:57 Set A/D data flow result=40 08:12:57 Set A/D channel type result=40 08:12:57 Set A/D encoding result=40 08:12:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:57 Set channel filter=0.000000e+000 result=40 08:12:57 Config A/D Result=40 08:12:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:57 Get A/D filter: -9.255963e+061 result=40 08:12:57 Get A/D value=-858993460 result=40 08:12:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:57 Parameters OK 08:12:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:57 Set A/D data flow result=40 08:12:57 Set A/D channel type result=40 08:12:57 Set A/D encoding result=40 08:12:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:57 Set channel filter=0.000000e+000 result=40 08:12:57 Config A/D Result=40 08:12:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:57 Get A/D filter: -9.255963e+061 result=40 08:12:57 Get A/D value=-858993460 result=40 08:12:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:12:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:12:57 Aux= 08:12:57 Message to Camera, serial 58547 queued 08:13:34 Received message from Master: op=PointingHead serial=58560 08:13:34 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:13:34 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:13:34 Point started: ret=0 08:13:34 point_skyscan result=0 08:13:35 Check angles 08:13:35 SkyScan query 08:13:36 SkyScan query done: ret=0 az=152.79<-10186 ze=-21.51<-13434 Statuses=0009 0009 08:13:36 Msec=0 True Az=152.79 Ze=-21.51 Az status=0009 Ze status=0009 08:13:36 Check angles 08:13:36 SkyScan query 08:13:37 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.54<-12036 Statuses=0009 0009 08:13:37 Msec=750 True Az=135.405 Ze=-0.54 Az status=0009 Ze status=0009 08:13:37 Check angles 08:13:37 SkyScan query 08:13:37 SkyScan query done: ret=0 az=117.765<-7851 ze=20.4<-10640 Statuses=0009 0009 08:13:37 Msec=1500 True Az=117.765 Ze=20.4 Az status=0009 Ze status=0009 08:13:38 Check angles 08:13:38 SkyScan query 08:13:38 SkyScan query done: ret=0 az=100.275<-6685 ze=41.4<-9240 Statuses=0009 0009 08:13:38 Msec=2250 True Az=100.275 Ze=41.4 Az status=0009 Ze status=0009 08:13:38 Check angles 08:13:38 SkyScan query 08:13:39 SkyScan query done: ret=0 az=86.04<-5736 ze=51.555<-8563 Statuses=0009 0008 08:13:39 Msec=3000 True Az=86.04 Ze=51.555 Az status=0009 Ze status=0008 08:13:39 Check angles 08:13:39 SkyScan query 08:13:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:13:40 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:13:40 Message to Master queued w/err=0: serial=58560 error=0 08:13:45 Received message from Master: op=Filter serial=58561 08:13:45 Color wheel filter change from 0 to 0 08:13:45 FLIGetFilterPos err=0 currentPosition=0 08:13:45 FLIGetStepsRemaining err=0 RemainingSteps=0 08:13:45 Filter is already there-color wheel unchanged 08:13:45 Received message from Master: op=Shutter serial=58562 08:13:45 Shutter LASER close 08:13:45 Received message from Camera: op=State serial=58564 08:13:45 GetSingleValue result=40 Value=cccccccc 08:13:45 SkyScan query 08:13:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:13:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:45 Parameters OK 08:13:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:45 Set A/D data flow result=40 08:13:45 Set A/D channel type result=40 08:13:45 Set A/D encoding result=40 08:13:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:45 Set channel filter=0.000000e+000 result=40 08:13:45 Config A/D Result=40 08:13:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:45 Get A/D filter: -9.255963e+061 result=40 08:13:45 Get A/D value=-858993460 result=40 08:13:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:45 Parameters OK 08:13:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:45 Set A/D data flow result=40 08:13:45 Set A/D channel type result=40 08:13:45 Set A/D encoding result=40 08:13:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:45 Set channel filter=0.000000e+000 result=40 08:13:45 Config A/D Result=40 08:13:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:45 Get A/D filter: -9.255963e+061 result=40 08:13:45 Get A/D value=-858993460 result=40 08:13:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:13:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:13:45 Aux= 08:13:45 Message to Camera, serial 58564 queued 08:14:22 Received message from Master: op=PointingHead serial=58577 08:14:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:14:22 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:14:23 Point started: ret=0 08:14:23 point_skyscan result=0 08:14:23 Check angles 08:14:23 SkyScan query 08:14:24 SkyScan query done: ret=0 az=108.765<-7251 ze=38.49<-9434 Statuses=0009 0008 08:14:24 Msec=0 True Az=108.765 Ze=38.49 Az status=0009 Ze status=0008 08:14:24 Check angles 08:14:24 SkyScan query 08:14:25 SkyScan query done: ret=0 az=126.3<-8420 ze=38.505<-9433 Statuses=0009 0008 08:14:25 Msec=750 True Az=126.3 Ze=38.505 Az status=0009 Ze status=0008 08:14:25 Check angles 08:14:25 SkyScan query 08:14:25 SkyScan query done: ret=0 az=143.655<-9577 ze=38.505<-9433 Statuses=0009 0008 08:14:25 Msec=1500 True Az=143.655 Ze=38.505 Az status=0009 Ze status=0008 08:14:26 Check angles 08:14:26 SkyScan query 08:14:26 SkyScan query done: ret=0 az=161.13<-10742 ze=38.505<-9433 Statuses=0009 0008 08:14:26 Msec=2250 True Az=161.13 Ze=38.505 Az status=0009 Ze status=0008 08:14:26 Check angles 08:14:26 SkyScan query 08:14:27 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 08:14:27 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 08:14:27 Check angles 08:14:27 SkyScan query 08:14:28 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:14:28 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:14:28 Message to Master queued w/err=0: serial=58577 error=0 08:14:33 Received message from Master: op=Filter serial=58578 08:14:33 Color wheel filter change from 0 to 0 08:14:33 FLIGetFilterPos err=0 currentPosition=0 08:14:33 FLIGetStepsRemaining err=0 RemainingSteps=0 08:14:33 Filter is already there-color wheel unchanged 08:14:33 Received message from Master: op=Shutter serial=58579 08:14:33 Shutter LASER close 08:14:33 Received message from Camera: op=State serial=58581 08:14:33 GetSingleValue result=40 Value=cccccccc 08:14:33 SkyScan query 08:14:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:14:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:33 Parameters OK 08:14:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:33 Set A/D data flow result=40 08:14:33 Set A/D channel type result=40 08:14:33 Set A/D encoding result=40 08:14:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:33 Set channel filter=0.000000e+000 result=40 08:14:33 Config A/D Result=40 08:14:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:33 Get A/D filter: -9.255963e+061 result=40 08:14:33 Get A/D value=-858993460 result=40 08:14:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:33 Parameters OK 08:14:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:33 Set A/D data flow result=40 08:14:33 Set A/D channel type result=40 08:14:33 Set A/D encoding result=40 08:14:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:33 Set channel filter=0.000000e+000 result=40 08:14:33 Config A/D Result=40 08:14:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:33 Get A/D filter: -9.255963e+061 result=40 08:14:33 Get A/D value=-858993460 result=40 08:14:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:14:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:14:33 Aux= 08:14:33 Message to Camera, serial 58581 queued 08:15:10 Received message from Master: op=PointingHead serial=58594 08:15:10 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:15:10 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:15:11 Point started: ret=0 08:15:11 point_skyscan result=0 08:15:11 Check angles 08:15:11 SkyScan query 08:15:12 SkyScan query done: ret=0 az=153.12<-10208 ze=8.85<-11410 Statuses=0009 0009 08:15:12 Msec=0 True Az=153.12 Ze=8.85 Az status=0009 Ze status=0009 08:15:12 Check angles 08:15:12 SkyScan query 08:15:13 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.51<-12834 Statuses=0009 0009 08:15:13 Msec=750 True Az=135.375 Ze=-12.51 Az status=0009 Ze status=0009 08:15:13 Check angles 08:15:13 SkyScan query 08:15:13 SkyScan query done: ret=0 az=117.36<-7824 ze=-33.915<-14261 Statuses=0009 0009 08:15:13 Msec=1500 True Az=117.36 Ze=-33.915 Az status=0009 Ze status=0009 08:15:14 Check angles 08:15:14 SkyScan query 08:15:14 SkyScan query done: ret=0 az=99.63<-6642 ze=-51.57<-15438 Statuses=0009 0009 08:15:14 Msec=2250 True Az=99.63 Ze=-51.57 Az status=0009 Ze status=0009 08:15:14 Check angles 08:15:14 SkyScan query 08:15:15 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 08:15:15 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 08:15:15 Check angles 08:15:15 SkyScan query 08:15:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:15:16 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:15:16 Message to Master queued w/err=0: serial=58594 error=0 08:15:21 Received message from Master: op=Filter serial=58595 08:15:21 Color wheel filter change from 0 to 0 08:15:21 FLIGetFilterPos err=0 currentPosition=0 08:15:21 FLIGetStepsRemaining err=0 RemainingSteps=0 08:15:21 Filter is already there-color wheel unchanged 08:15:21 Received message from Master: op=Shutter serial=58596 08:15:21 Shutter LASER close 08:15:21 Received message from Camera: op=State serial=58598 08:15:21 GetSingleValue result=40 Value=cccccccc 08:15:21 SkyScan query 08:15:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:15:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:22 Parameters OK 08:15:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:22 Set A/D data flow result=40 08:15:22 Set A/D channel type result=40 08:15:22 Set A/D encoding result=40 08:15:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:22 Set channel filter=0.000000e+000 result=40 08:15:22 Config A/D Result=40 08:15:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:22 Get A/D filter: -9.255963e+061 result=40 08:15:22 Get A/D value=-858993460 result=40 08:15:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:22 Parameters OK 08:15:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:22 Set A/D data flow result=40 08:15:22 Set A/D channel type result=40 08:15:22 Set A/D encoding result=40 08:15:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:22 Set channel filter=0.000000e+000 result=40 08:15:22 Config A/D Result=40 08:15:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:22 Get A/D filter: -9.255963e+061 result=40 08:15:22 Get A/D value=-858993460 result=40 08:15:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:15:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:15:22 Aux= 08:15:22 Message to Camera, serial 58598 queued 08:15:29 Received message from Master: op=Identify serial=58599 [UTC 2018-12-11 08:15:54] 08:15:58 Received message from Master: op=PointingHead serial=58614 08:15:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:15:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:15:59 Point started: ret=0 08:15:59 point_skyscan result=0 08:15:59 Check angles 08:15:59 SkyScan query 08:16:00 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.345<-17423 Statuses=0009 0009 08:16:00 Msec=0 True Az=108.99 Ze=-81.345 Az status=0009 Ze status=0009 08:16:00 Check angles 08:16:00 SkyScan query 08:16:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.75<-18850 Statuses=0008 0009 08:16:01 Msec=750 True Az=112.995 Ze=-102.75 Az status=0008 Ze status=0009 08:16:01 Check angles 08:16:01 SkyScan query 08:16:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.69<-20246 Statuses=0008 0009 08:16:02 Msec=1500 True Az=112.995 Ze=-123.69 Az status=0008 Ze status=0009 08:16:02 Check angles 08:16:02 SkyScan query 08:16:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.66<-21644 Statuses=0008 0009 08:16:02 Msec=2250 True Az=112.995 Ze=-144.66 Az status=0008 Ze status=0009 08:16:03 Check angles 08:16:03 SkyScan query 08:16:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.6<-23040 Statuses=0008 0009 08:16:03 Msec=3000 True Az=112.995 Ze=-165.6 Az status=0008 Ze status=0009 08:16:03 Check angles 08:16:03 SkyScan query 08:16:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:16:04 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:16:04 Message to Master queued w/err=0: serial=58614 error=0 08:16:09 Received message from Master: op=Filter serial=58615 08:16:09 Color wheel filter change from 0 to 0 08:16:09 FLIGetFilterPos err=0 currentPosition=0 08:16:09 FLIGetStepsRemaining err=0 RemainingSteps=0 08:16:09 Filter is already there-color wheel unchanged 08:16:09 Received message from Master: op=Shutter serial=58616 08:16:09 Shutter LASER open 08:16:09 Received message from Camera: op=State serial=58618 08:16:09 GetSingleValue result=40 Value=cccccccc 08:16:09 SkyScan query 08:16:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:16:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:10 Parameters OK 08:16:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:10 Set A/D data flow result=40 08:16:10 Set A/D channel type result=40 08:16:10 Set A/D encoding result=40 08:16:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:10 Set channel filter=0.000000e+000 result=40 08:16:10 Config A/D Result=40 08:16:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:10 Get A/D filter: -9.255963e+061 result=40 08:16:10 Get A/D value=-858993460 result=40 08:16:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:10 Parameters OK 08:16:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:10 Set A/D data flow result=40 08:16:10 Set A/D channel type result=40 08:16:10 Set A/D encoding result=40 08:16:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:10 Set channel filter=0.000000e+000 result=40 08:16:10 Config A/D Result=40 08:16:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:10 Get A/D filter: -9.255963e+061 result=40 08:16:10 Get A/D value=-858993460 result=40 08:16:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:16:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:16:10 Aux= 08:16:10 Message to Camera, serial 58618 queued 08:16:17 Received message from Master: op=Shutter serial=58627 08:16:17 Shutter LASER close 08:16:18 Received message from Master: op=PointingHead serial=58631 08:16:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:16:18 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:16:18 Point started: ret=0 08:16:18 point_skyscan result=0 08:16:19 Check angles 08:16:19 SkyScan query 08:16:19 SkyScan query done: ret=0 az=90.195<-6013 ze=157.53<-1498 Statuses=0009 0009 08:16:19 Msec=0 True Az=90.195 Ze=157.53 Az status=0009 Ze status=0009 08:16:20 Check angles 08:16:20 SkyScan query 08:16:20 SkyScan query done: ret=0 az=72.645<-4843 ze=136.545<-2897 Statuses=0009 0009 08:16:20 Msec=750 True Az=72.645 Ze=136.545 Az status=0009 Ze status=0009 08:16:20 Check angles 08:16:20 SkyScan query 08:16:21 SkyScan query done: ret=0 az=55.23<-3682 ze=115.635<-4291 Statuses=0009 0009 08:16:21 Msec=1500 True Az=55.23 Ze=115.635 Az status=0009 Ze status=0009 08:16:21 Check angles 08:16:21 SkyScan query 08:16:22 SkyScan query done: ret=0 az=40.875<-2725 ze=94.635<-5691 Statuses=0009 0009 08:16:22 Msec=2250 True Az=40.875 Ze=94.635 Az status=0009 Ze status=0009 08:16:22 Check angles 08:16:22 SkyScan query 08:16:22 SkyScan query done: ret=0 az=40.995<-2733 ze=73.275<-7115 Statuses=0008 0009 08:16:22 Msec=3000 True Az=40.995 Ze=73.275 Az status=0008 Ze status=0009 08:16:23 Check angles 08:16:23 SkyScan query 08:16:23 SkyScan query done: ret=0 az=40.995<-2733 ze=52.755<-8483 Statuses=0008 0009 08:16:23 Msec=3750 True Az=40.995 Ze=52.755 Az status=0008 Ze status=0009 08:16:23 Check angles 08:16:23 SkyScan query 08:16:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:16:24 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:16:24 Message to Master queued w/err=0: serial=58631 error=0 08:16:29 Received message from Master: op=Filter serial=58632 08:16:29 Color wheel filter change from 0 to 0 08:16:29 FLIGetFilterPos err=0 currentPosition=0 08:16:29 FLIGetStepsRemaining err=0 RemainingSteps=0 08:16:29 Filter is already there-color wheel unchanged 08:16:29 Received message from Master: op=Shutter serial=58633 08:16:29 Shutter LASER close 08:16:29 Received message from Camera: op=State serial=58635 08:16:29 GetSingleValue result=40 Value=cccccccc 08:16:29 SkyScan query 08:16:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:16:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:30 Parameters OK 08:16:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:30 Set A/D data flow result=40 08:16:30 Set A/D channel type result=40 08:16:30 Set A/D encoding result=40 08:16:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:30 Set channel filter=0.000000e+000 result=40 08:16:30 Config A/D Result=40 08:16:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:30 Get A/D filter: -9.255963e+061 result=40 08:16:30 Get A/D value=-858993460 result=40 08:16:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:30 Parameters OK 08:16:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:30 Set A/D data flow result=40 08:16:30 Set A/D channel type result=40 08:16:30 Set A/D encoding result=40 08:16:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:30 Set channel filter=0.000000e+000 result=40 08:16:30 Config A/D Result=40 08:16:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:30 Get A/D filter: -9.255963e+061 result=40 08:16:30 Get A/D value=-858993460 result=40 08:16:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:16:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:16:30 Aux= 08:16:30 Message to Camera, serial 58635 queued 08:17:07 Received message from Master: op=PointingHead serial=58648 08:17:07 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:17:07 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:17:07 Point started: ret=0 08:17:07 point_skyscan result=0 08:17:08 Check angles 08:17:08 SkyScan query 08:17:08 SkyScan query done: ret=0 az=64.08<-4272 ze=66.555<-7563 Statuses=0009 0008 08:17:08 Msec=0 True Az=64.08 Ze=66.555 Az status=0009 Ze status=0008 08:17:09 Check angles 08:17:09 SkyScan query 08:17:09 SkyScan query done: ret=0 az=81.375<-5425 ze=66.51<-7566 Statuses=0009 0008 08:17:09 Msec=750 True Az=81.375 Ze=66.51 Az status=0009 Ze status=0008 08:17:09 Check angles 08:17:09 SkyScan query 08:17:10 SkyScan query done: ret=0 az=99.495<-6633 ze=66.495<-7567 Statuses=0009 0008 08:17:10 Msec=1500 True Az=99.495 Ze=66.495 Az status=0009 Ze status=0008 08:17:10 Check angles 08:17:10 SkyScan query 08:17:11 SkyScan query done: ret=0 az=117.015<-7801 ze=66.495<-7567 Statuses=0009 0008 08:17:11 Msec=2250 True Az=117.015 Ze=66.495 Az status=0009 Ze status=0008 08:17:11 Check angles 08:17:11 SkyScan query 08:17:11 SkyScan query done: ret=0 az=134.4<-8960 ze=66.495<-7567 Statuses=0009 0008 08:17:11 Msec=3000 True Az=134.4 Ze=66.495 Az status=0009 Ze status=0008 08:17:12 Check angles 08:17:12 SkyScan query 08:17:12 SkyScan query done: ret=0 az=152.265<-10151 ze=66.495<-7567 Statuses=0009 0008 08:17:12 Msec=3750 True Az=152.265 Ze=66.495 Az status=0009 Ze status=0008 08:17:12 Check angles 08:17:12 SkyScan query 08:17:13 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:17:13 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 08:17:13 Message to Master queued w/err=0: serial=58648 error=0 08:17:18 Received message from Master: op=Filter serial=58649 08:17:18 Color wheel filter change from 0 to 0 08:17:18 FLIGetFilterPos err=0 currentPosition=0 08:17:18 FLIGetStepsRemaining err=0 RemainingSteps=0 08:17:18 Filter is already there-color wheel unchanged 08:17:18 Received message from Master: op=Shutter serial=58650 08:17:18 Shutter LASER close 08:17:18 Received message from Camera: op=State serial=58652 08:17:18 GetSingleValue result=40 Value=cccccccc 08:17:18 SkyScan query 08:17:19 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:17:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:19 Parameters OK 08:17:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:19 Set A/D data flow result=40 08:17:19 Set A/D channel type result=40 08:17:19 Set A/D encoding result=40 08:17:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:19 Set channel filter=0.000000e+000 result=40 08:17:19 Config A/D Result=40 08:17:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:19 Get A/D filter: -9.255963e+061 result=40 08:17:19 Get A/D value=-858993460 result=40 08:17:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:19 Parameters OK 08:17:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:19 Set A/D data flow result=40 08:17:19 Set A/D channel type result=40 08:17:19 Set A/D encoding result=40 08:17:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:19 Set channel filter=0.000000e+000 result=40 08:17:19 Config A/D Result=40 08:17:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:19 Get A/D filter: -9.255963e+061 result=40 08:17:19 Get A/D value=-858993460 result=40 08:17:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:19 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:17:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:17:19 Aux= 08:17:19 Message to Camera, serial 58652 queued 08:17:56 Received message from Master: op=PointingHead serial=58665 08:17:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:17:56 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:17:56 Point started: ret=0 08:17:56 point_skyscan result=0 08:17:57 Check angles 08:17:57 SkyScan query 08:17:57 SkyScan query done: ret=0 az=134.835<-8989 ze=36.66<-9556 Statuses=0009 0009 08:17:57 Msec=0 True Az=134.835 Ze=36.66 Az status=0009 Ze status=0009 08:17:57 Check angles 08:17:57 SkyScan query 08:17:58 SkyScan query done: ret=0 az=117.435<-7829 ze=15.735<-10951 Statuses=0009 0009 08:17:58 Msec=750 True Az=117.435 Ze=15.735 Az status=0009 Ze status=0009 08:17:58 Check angles 08:17:58 SkyScan query 08:17:59 SkyScan query done: ret=0 az=100.065<-6671 ze=-5.25<-12350 Statuses=0009 0009 08:17:59 Msec=1500 True Az=100.065 Ze=-5.25 Az status=0009 Ze status=0009 08:17:59 Check angles 08:17:59 SkyScan query 08:17:59 SkyScan query done: ret=0 az=82.59<-5506 ze=-26.19<-13746 Statuses=0009 0009 08:17:59 Msec=2250 True Az=82.59 Ze=-26.19 Az status=0009 Ze status=0009 08:18:00 Check angles 08:18:00 SkyScan query 08:18:00 SkyScan query done: ret=0 az=65.07<-4338 ze=-38.565<-14571 Statuses=0009 0008 08:18:00 Msec=3000 True Az=65.07 Ze=-38.565 Az status=0009 Ze status=0008 08:18:00 Check angles 08:18:00 SkyScan query 08:18:01 SkyScan query done: ret=0 az=47.64<-3176 ze=-38.535<-14569 Statuses=0009 0008 08:18:01 Msec=3750 True Az=47.64 Ze=-38.535 Az status=0009 Ze status=0008 08:18:01 Check angles 08:18:01 SkyScan query 08:18:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:18:02 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:18:02 Message to Master queued w/err=0: serial=58665 error=0 08:18:07 Received message from Master: op=Filter serial=58666 08:18:07 Color wheel filter change from 0 to 0 08:18:07 FLIGetFilterPos err=0 currentPosition=0 08:18:07 FLIGetStepsRemaining err=0 RemainingSteps=0 08:18:07 Filter is already there-color wheel unchanged 08:18:07 Received message from Master: op=Shutter serial=58667 08:18:07 Shutter LASER close 08:18:07 Received message from Camera: op=State serial=58669 08:18:07 GetSingleValue result=40 Value=cccccccc 08:18:07 SkyScan query 08:18:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:18:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:08 Parameters OK 08:18:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:08 Set A/D data flow result=40 08:18:08 Set A/D channel type result=40 08:18:08 Set A/D encoding result=40 08:18:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:08 Set channel filter=0.000000e+000 result=40 08:18:08 Config A/D Result=40 08:18:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:08 Get A/D filter: -9.255963e+061 result=40 08:18:08 Get A/D value=-858993460 result=40 08:18:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:08 Parameters OK 08:18:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:08 Set A/D data flow result=40 08:18:08 Set A/D channel type result=40 08:18:08 Set A/D encoding result=40 08:18:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:08 Set channel filter=0.000000e+000 result=40 08:18:08 Config A/D Result=40 08:18:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:08 Get A/D filter: -9.255963e+061 result=40 08:18:08 Get A/D value=-858993460 result=40 08:18:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:18:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:18:08 Aux= 08:18:08 Message to Camera, serial 58669 queued 08:18:44 Received message from Master: op=PointingHead serial=58682 08:18:44 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:18:44 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:18:45 Point started: ret=0 08:18:45 point_skyscan result=0 08:18:45 Check angles 08:18:45 SkyScan query 08:18:46 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.19<-16546 Statuses=0009 0009 08:18:46 Msec=0 True Az=63.795 Ze=-68.19 Az status=0009 Ze status=0009 08:18:46 Check angles 08:18:46 SkyScan query 08:18:47 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.61<-17974 Statuses=0009 0009 08:18:47 Msec=750 True Az=81.585 Ze=-89.61 Az status=0009 Ze status=0009 08:18:47 Check angles 08:18:47 SkyScan query 08:18:48 SkyScan query done: ret=0 az=99.18<-6612 ze=-110.565<-19371 Statuses=0009 0009 08:18:48 Msec=1500 True Az=99.18 Ze=-110.565 Az status=0009 Ze status=0009 08:18:48 Check angles 08:18:48 SkyScan query 08:18:48 SkyScan query done: ret=0 az=116.775<-7785 ze=-131.505<-20767 Statuses=0009 0009 08:18:48 Msec=2250 True Az=116.775 Ze=-131.505 Az status=0009 Ze status=0009 08:18:48 Check angles 08:18:48 SkyScan query 08:18:49 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 08:18:49 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 08:18:49 Check angles 08:18:49 SkyScan query 08:18:50 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:18:50 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:18:50 Message to Master queued w/err=0: serial=58682 error=0 08:18:55 Received message from Master: op=Filter serial=58683 08:18:55 Color wheel filter change from 0 to 0 08:18:55 FLIGetFilterPos err=0 currentPosition=0 08:18:55 FLIGetStepsRemaining err=0 RemainingSteps=0 08:18:55 Filter is already there-color wheel unchanged 08:18:55 Received message from Master: op=Shutter serial=58684 08:18:55 Shutter LASER close 08:18:55 Received message from Camera: op=State serial=58686 08:18:55 GetSingleValue result=40 Value=cccccccc 08:18:55 SkyScan query 08:18:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:18:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:56 Parameters OK 08:18:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:56 Set A/D data flow result=40 08:18:56 Set A/D channel type result=40 08:18:56 Set A/D encoding result=40 08:18:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:56 Set channel filter=0.000000e+000 result=40 08:18:56 Config A/D Result=40 08:18:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:56 Get A/D filter: -9.255963e+061 result=40 08:18:56 Get A/D value=-858993460 result=40 08:18:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:56 Parameters OK 08:18:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:56 Set A/D data flow result=40 08:18:56 Set A/D channel type result=40 08:18:56 Set A/D encoding result=40 08:18:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:56 Set channel filter=0.000000e+000 result=40 08:18:56 Config A/D Result=40 08:18:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:56 Get A/D filter: -9.255963e+061 result=40 08:18:56 Get A/D value=-858993460 result=40 08:18:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:56 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:18:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:18:56 Aux= 08:18:56 Message to Camera, serial 58686 queued 08:19:32 Received message from Master: op=PointingHead serial=58699 08:19:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:19:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:19:33 Point started: ret=0 08:19:33 point_skyscan result=0 08:19:34 Check angles 08:19:34 SkyScan query 08:19:34 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 08:19:34 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 08:19:34 Check angles 08:19:34 SkyScan query 08:19:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:19:35 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:19:35 Message to Master queued w/err=0: serial=58699 error=0 08:19:40 Received message from Master: op=Filter serial=58700 08:19:40 Color wheel filter change from 0 to 0 08:19:40 FLIGetFilterPos err=0 currentPosition=0 08:19:40 FLIGetStepsRemaining err=0 RemainingSteps=0 08:19:40 Filter is already there-color wheel unchanged 08:19:40 Received message from Master: op=Shutter serial=58701 08:19:40 Shutter LASER open 08:19:40 Received message from Camera: op=State serial=58703 08:19:40 GetSingleValue result=40 Value=cccccccc 08:19:40 SkyScan query 08:19:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:19:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:41 Parameters OK 08:19:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:41 Set A/D data flow result=40 08:19:41 Set A/D channel type result=40 08:19:41 Set A/D encoding result=40 08:19:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:41 Set channel filter=0.000000e+000 result=40 08:19:41 Config A/D Result=40 08:19:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:41 Get A/D filter: -9.255963e+061 result=40 08:19:41 Get A/D value=-858993460 result=40 08:19:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:41 Parameters OK 08:19:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:41 Set A/D data flow result=40 08:19:41 Set A/D channel type result=40 08:19:41 Set A/D encoding result=40 08:19:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:41 Set channel filter=0.000000e+000 result=40 08:19:41 Config A/D Result=40 08:19:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:41 Get A/D filter: -9.255963e+061 result=40 08:19:41 Get A/D value=-858993460 result=40 08:19:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:19:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:19:41 Aux= 08:19:41 Message to Camera, serial 58703 queued 08:19:49 Received message from Master: op=Shutter serial=58713 08:19:49 Shutter LASER close 08:19:50 Received message from Master: op=PointingHead serial=58717 08:19:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:19:50 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:19:50 Point started: ret=0 08:19:50 point_skyscan result=0 08:19:51 Check angles 08:19:51 SkyScan query 08:19:51 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.325<-21555 Statuses=0009 0009 08:19:51 Msec=0 True Az=135.945 Ze=-143.325 Az status=0009 Ze status=0009 08:19:52 Check angles 08:19:52 SkyScan query 08:19:52 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.31<-20154 Statuses=0009 0009 08:19:52 Msec=750 True Az=153.435 Ze=-122.31 Az status=0009 Ze status=0009 08:19:52 Check angles 08:19:52 SkyScan query 08:19:53 SkyScan query done: ret=0 az=170.835<-11389 ze=-101.445<-18763 Statuses=0009 0009 08:19:53 Msec=1500 True Az=170.835 Ze=-101.445 Az status=0009 Ze status=0009 08:19:53 Check angles 08:19:53 SkyScan query 08:19:54 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.01<-17334 Statuses=0008 0009 08:19:54 Msec=2250 True Az=176.025 Ze=-80.01 Az status=0008 Ze status=0009 08:19:54 Check angles 08:19:54 SkyScan query 08:19:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.025<-15935 Statuses=0008 0009 08:19:54 Msec=3000 True Az=175.995 Ze=-59.025 Az status=0008 Ze status=0009 08:19:55 Check angles 08:19:55 SkyScan query 08:19:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:19:55 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:19:55 Message to Master queued w/err=0: serial=58717 error=0 08:20:00 Received message from Master: op=Filter serial=58718 08:20:00 Color wheel filter change from 0 to 0 08:20:00 FLIGetFilterPos err=0 currentPosition=0 08:20:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:20:00 Filter is already there-color wheel unchanged 08:20:00 Received message from Master: op=Shutter serial=58719 08:20:00 Shutter LASER close 08:20:01 Received message from Camera: op=State serial=58721 08:20:01 GetSingleValue result=40 Value=cccccccc 08:20:01 SkyScan query 08:20:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:20:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:01 Parameters OK 08:20:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:01 Set A/D data flow result=40 08:20:01 Set A/D channel type result=40 08:20:01 Set A/D encoding result=40 08:20:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:01 Set channel filter=0.000000e+000 result=40 08:20:01 Config A/D Result=40 08:20:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:01 Get A/D filter: -9.255963e+061 result=40 08:20:01 Get A/D value=-858993460 result=40 08:20:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:01 Parameters OK 08:20:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:01 Set A/D data flow result=40 08:20:01 Set A/D channel type result=40 08:20:01 Set A/D encoding result=40 08:20:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:01 Set channel filter=0.000000e+000 result=40 08:20:01 Config A/D Result=40 08:20:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:01 Get A/D filter: -9.255963e+061 result=40 08:20:01 Get A/D value=-858993460 result=40 08:20:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:20:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:20:01 Aux= 08:20:01 Message to Camera, serial 58721 queued 08:20:38 Received message from Master: op=PointingHead serial=58734 08:20:38 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:20:38 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:20:38 Point started: ret=0 08:20:38 point_skyscan result=0 08:20:39 Check angles 08:20:39 SkyScan query 08:20:40 SkyScan query done: ret=0 az=153.195<-10213 ze=-22.005<-13467 Statuses=0009 0009 08:20:40 Msec=0 True Az=153.195 Ze=-22.005 Az status=0009 Ze status=0009 08:20:40 Check angles 08:20:40 SkyScan query 08:20:40 SkyScan query done: ret=0 az=135.795<-9053 ze=-0.96<-12064 Statuses=0009 0009 08:20:40 Msec=750 True Az=135.795 Ze=-0.96 Az status=0009 Ze status=0009 08:20:41 Check angles 08:20:41 SkyScan query 08:20:41 SkyScan query done: ret=0 az=118.185<-7879 ze=19.935<-10671 Statuses=0009 0009 08:20:41 Msec=1500 True Az=118.185 Ze=19.935 Az status=0009 Ze status=0009 08:20:41 Check angles 08:20:41 SkyScan query 08:20:42 SkyScan query done: ret=0 az=100.62<-6708 ze=40.89<-9274 Statuses=0009 0009 08:20:42 Msec=2250 True Az=100.62 Ze=40.89 Az status=0009 Ze status=0009 08:20:42 Check angles 08:20:42 SkyScan query 08:20:43 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 08:20:43 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 08:20:43 Check angles 08:20:43 SkyScan query 08:20:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:20:43 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:20:43 Message to Master queued w/err=0: serial=58734 error=0 08:20:48 Received message from Master: op=Filter serial=58735 08:20:48 Color wheel filter change from 0 to 0 08:20:48 FLIGetFilterPos err=0 currentPosition=0 08:20:48 FLIGetStepsRemaining err=0 RemainingSteps=0 08:20:48 Filter is already there-color wheel unchanged 08:20:49 Received message from Master: op=Shutter serial=58736 08:20:49 Shutter LASER close 08:20:49 Received message from Camera: op=State serial=58738 08:20:49 GetSingleValue result=40 Value=cccccccc 08:20:49 SkyScan query 08:20:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:20:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:49 Parameters OK 08:20:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:49 Set A/D data flow result=40 08:20:49 Set A/D channel type result=40 08:20:49 Set A/D encoding result=40 08:20:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:49 Set channel filter=0.000000e+000 result=40 08:20:49 Config A/D Result=40 08:20:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:49 Get A/D filter: -9.255963e+061 result=40 08:20:49 Get A/D value=-858993460 result=40 08:20:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:49 Parameters OK 08:20:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:49 Set A/D data flow result=40 08:20:49 Set A/D channel type result=40 08:20:49 Set A/D encoding result=40 08:20:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:49 Set channel filter=0.000000e+000 result=40 08:20:49 Config A/D Result=40 08:20:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:49 Get A/D filter: -9.255963e+061 result=40 08:20:49 Get A/D value=-858993460 result=40 08:20:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:20:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:20:49 Aux= 08:20:49 Message to Camera, serial 58738 queued 08:21:26 Received message from Master: op=PointingHead serial=58751 08:21:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:21:26 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:21:26 Point started: ret=0 08:21:26 point_skyscan result=0 08:21:27 Check angles 08:21:27 SkyScan query 08:21:28 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 08:21:28 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 08:21:28 Check angles 08:21:28 SkyScan query 08:21:29 SkyScan query done: ret=0 az=126.54<-8436 ze=38.505<-9433 Statuses=0009 0008 08:21:29 Msec=750 True Az=126.54 Ze=38.505 Az status=0009 Ze status=0008 08:21:29 Check angles 08:21:29 SkyScan query 08:21:29 SkyScan query done: ret=0 az=144.06<-9604 ze=38.505<-9433 Statuses=0009 0008 08:21:29 Msec=1500 True Az=144.06 Ze=38.505 Az status=0009 Ze status=0008 08:21:29 Check angles 08:21:29 SkyScan query 08:21:30 SkyScan query done: ret=0 az=161.325<-10755 ze=38.505<-9433 Statuses=0009 0008 08:21:30 Msec=2250 True Az=161.325 Ze=38.505 Az status=0009 Ze status=0008 08:21:30 Check angles 08:21:30 SkyScan query 08:21:31 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 08:21:31 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 08:21:31 Check angles 08:21:31 SkyScan query 08:21:32 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:21:32 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:21:32 Message to Master queued w/err=0: serial=58751 error=0 08:21:37 Received message from Master: op=Filter serial=58752 08:21:37 Color wheel filter change from 0 to 0 08:21:37 FLIGetFilterPos err=0 currentPosition=0 08:21:37 FLIGetStepsRemaining err=0 RemainingSteps=0 08:21:37 Filter is already there-color wheel unchanged 08:21:37 Received message from Master: op=Shutter serial=58753 08:21:37 Shutter LASER close 08:21:37 Received message from Camera: op=State serial=58755 08:21:37 GetSingleValue result=40 Value=cccccccc 08:21:37 SkyScan query 08:21:37 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:21:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:37 Parameters OK 08:21:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:37 Set A/D data flow result=40 08:21:37 Set A/D channel type result=40 08:21:37 Set A/D encoding result=40 08:21:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:37 Set channel filter=0.000000e+000 result=40 08:21:37 Config A/D Result=40 08:21:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:37 Get A/D filter: -9.255963e+061 result=40 08:21:37 Get A/D value=-858993460 result=40 08:21:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:37 Parameters OK 08:21:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:37 Set A/D data flow result=40 08:21:37 Set A/D channel type result=40 08:21:37 Set A/D encoding result=40 08:21:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:37 Set channel filter=0.000000e+000 result=40 08:21:37 Config A/D Result=40 08:21:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:37 Get A/D filter: -9.255963e+061 result=40 08:21:37 Get A/D value=-858993460 result=40 08:21:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:21:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:21:37 Aux= 08:21:37 Message to Camera, serial 58755 queued 08:22:14 Received message from Master: op=PointingHead serial=58768 08:22:14 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:22:14 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:22:14 Point started: ret=0 08:22:14 point_skyscan result=0 08:22:15 Check angles 08:22:15 SkyScan query 08:22:16 SkyScan query done: ret=0 az=153.225<-10215 ze=8.94<-11404 Statuses=0009 0009 08:22:16 Msec=0 True Az=153.225 Ze=8.94 Az status=0009 Ze status=0009 08:22:16 Check angles 08:22:16 SkyScan query 08:22:17 SkyScan query done: ret=0 az=135.855<-9057 ze=-12<-12800 Statuses=0009 0009 08:22:17 Msec=750 True Az=135.855 Ze=-12 Az status=0009 Ze status=0009 08:22:17 Check angles 08:22:17 SkyScan query 08:22:17 SkyScan query done: ret=0 az=118.215<-7881 ze=-32.94<-14196 Statuses=0009 0009 08:22:17 Msec=1500 True Az=118.215 Ze=-32.94 Az status=0009 Ze status=0009 08:22:17 Check angles 08:22:17 SkyScan query 08:22:18 SkyScan query done: ret=0 az=100.71<-6714 ze=-51.495<-15433 Statuses=0009 0009 08:22:18 Msec=2250 True Az=100.71 Ze=-51.495 Az status=0009 Ze status=0009 08:22:18 Check angles 08:22:18 SkyScan query 08:22:19 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 08:22:19 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 08:22:19 Check angles 08:22:19 SkyScan query 08:22:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:22:20 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:22:20 Message to Master queued w/err=0: serial=58768 error=0 08:22:25 Received message from Master: op=Filter serial=58769 08:22:25 Color wheel filter change from 0 to 0 08:22:25 FLIGetFilterPos err=0 currentPosition=0 08:22:25 FLIGetStepsRemaining err=0 RemainingSteps=0 08:22:25 Filter is already there-color wheel unchanged 08:22:25 Received message from Master: op=Shutter serial=58770 08:22:25 Shutter LASER close 08:22:25 Received message from Camera: op=State serial=58772 08:22:25 GetSingleValue result=40 Value=cccccccc 08:22:25 SkyScan query 08:22:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:22:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:25 Parameters OK 08:22:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:25 Set A/D data flow result=40 08:22:25 Set A/D channel type result=40 08:22:25 Set A/D encoding result=40 08:22:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:25 Set channel filter=0.000000e+000 result=40 08:22:25 Config A/D Result=40 08:22:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:25 Get A/D filter: -9.255963e+061 result=40 08:22:25 Get A/D value=-858993460 result=40 08:22:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:25 Parameters OK 08:22:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:25 Set A/D data flow result=40 08:22:25 Set A/D channel type result=40 08:22:25 Set A/D encoding result=40 08:22:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:25 Set channel filter=0.000000e+000 result=40 08:22:25 Config A/D Result=40 08:22:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:25 Get A/D filter: -9.255963e+061 result=40 08:22:25 Get A/D value=-858993460 result=40 08:22:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:22:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:22:25 Aux= 08:22:25 Message to Camera, serial 58772 queued 08:23:02 Received message from Master: op=PointingHead serial=58785 08:23:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:23:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:23:03 Point started: ret=0 08:23:03 point_skyscan result=0 08:23:03 Check angles 08:23:03 SkyScan query 08:23:04 SkyScan query done: ret=0 az=109.05<-7270 ze=-81.36<-17424 Statuses=0009 0009 08:23:04 Msec=0 True Az=109.05 Ze=-81.36 Az status=0009 Ze status=0009 08:23:04 Check angles 08:23:04 SkyScan query 08:23:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.33<-18822 Statuses=0008 0009 08:23:05 Msec=750 True Az=112.995 Ze=-102.33 Az status=0008 Ze status=0009 08:23:05 Check angles 08:23:05 SkyScan query 08:23:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.72<-20248 Statuses=0008 0009 08:23:05 Msec=1500 True Az=112.995 Ze=-123.72 Az status=0008 Ze status=0009 08:23:06 Check angles 08:23:06 SkyScan query 08:23:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.08<-21672 Statuses=0008 0009 08:23:06 Msec=2250 True Az=112.995 Ze=-145.08 Az status=0008 Ze status=0009 08:23:06 Check angles 08:23:06 SkyScan query 08:23:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.05<-23070 Statuses=0008 0009 08:23:07 Msec=3000 True Az=112.995 Ze=-166.05 Az status=0008 Ze status=0009 08:23:07 Check angles 08:23:07 SkyScan query 08:23:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:23:08 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:23:08 Message to Master queued w/err=0: serial=58785 error=0 08:23:13 Received message from Master: op=Filter serial=58786 08:23:13 Color wheel filter change from 0 to 0 08:23:13 FLIGetFilterPos err=0 currentPosition=0 08:23:13 FLIGetStepsRemaining err=0 RemainingSteps=0 08:23:13 Filter is already there-color wheel unchanged 08:23:13 Received message from Master: op=Shutter serial=58787 08:23:13 Shutter LASER open 08:23:13 Received message from Camera: op=State serial=58789 08:23:13 GetSingleValue result=40 Value=cccccccc 08:23:13 SkyScan query 08:23:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:23:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:14 Parameters OK 08:23:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:14 Set A/D data flow result=40 08:23:14 Set A/D channel type result=40 08:23:14 Set A/D encoding result=40 08:23:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:14 Set channel filter=0.000000e+000 result=40 08:23:14 Config A/D Result=40 08:23:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:14 Get A/D filter: -9.255963e+061 result=40 08:23:14 Get A/D value=-858993460 result=40 08:23:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:14 Parameters OK 08:23:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:14 Set A/D data flow result=40 08:23:14 Set A/D channel type result=40 08:23:14 Set A/D encoding result=40 08:23:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:14 Set channel filter=0.000000e+000 result=40 08:23:14 Config A/D Result=40 08:23:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:14 Get A/D filter: -9.255963e+061 result=40 08:23:14 Get A/D value=-858993460 result=40 08:23:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:23:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:23:14 Aux= 08:23:14 Message to Camera, serial 58789 queued 08:23:22 Received message from Master: op=Shutter serial=58799 08:23:22 Shutter LASER close 08:23:22 Received message from Master: op=PointingHead serial=58803 08:23:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:23:22 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:23:23 Point started: ret=0 08:23:23 point_skyscan result=0 08:23:24 Check angles 08:23:24 SkyScan query 08:23:24 SkyScan query done: ret=0 az=89.895<-5993 ze=157.32<-1512 Statuses=0009 0009 08:23:24 Msec=0 True Az=89.895 Ze=157.32 Az status=0009 Ze status=0009 08:23:24 Check angles 08:23:24 SkyScan query 08:23:25 SkyScan query done: ret=0 az=72.06<-4804 ze=135.915<-2939 Statuses=0009 0009 08:23:25 Msec=750 True Az=72.06 Ze=135.915 Az status=0009 Ze status=0009 08:23:25 Check angles 08:23:25 SkyScan query 08:23:26 SkyScan query done: ret=0 az=54.795<-3653 ze=114.975<-4335 Statuses=0009 0009 08:23:26 Msec=1500 True Az=54.795 Ze=114.975 Az status=0009 Ze status=0009 08:23:26 Check angles 08:23:26 SkyScan query 08:23:26 SkyScan query done: ret=0 az=40.89<-2726 ze=93.945<-5737 Statuses=0009 0009 08:23:26 Msec=2250 True Az=40.89 Ze=93.945 Az status=0009 Ze status=0009 08:23:27 Check angles 08:23:27 SkyScan query 08:23:27 SkyScan query done: ret=0 az=40.995<-2733 ze=73.02<-7132 Statuses=0008 0009 08:23:27 Msec=3000 True Az=40.995 Ze=73.02 Az status=0008 Ze status=0009 08:23:27 Check angles 08:23:27 SkyScan query 08:23:28 SkyScan query done: ret=0 az=40.995<-2733 ze=52.605<-8493 Statuses=0008 0009 08:23:28 Msec=3750 True Az=40.995 Ze=52.605 Az status=0008 Ze status=0009 08:23:28 Check angles 08:23:28 SkyScan query 08:23:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:23:29 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:23:29 Message to Master queued w/err=0: serial=58803 error=0 08:23:34 Received message from Master: op=Filter serial=58804 08:23:34 Color wheel filter change from 0 to 0 08:23:34 FLIGetFilterPos err=0 currentPosition=0 08:23:34 FLIGetStepsRemaining err=0 RemainingSteps=0 08:23:34 Filter is already there-color wheel unchanged 08:23:34 Received message from Master: op=Shutter serial=58805 08:23:34 Shutter LASER close 08:23:34 Received message from Camera: op=State serial=58807 08:23:34 GetSingleValue result=40 Value=cccccccc 08:23:34 SkyScan query 08:23:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:23:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:35 Parameters OK 08:23:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:35 Set A/D data flow result=40 08:23:35 Set A/D channel type result=40 08:23:35 Set A/D encoding result=40 08:23:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:35 Set channel filter=0.000000e+000 result=40 08:23:35 Config A/D Result=40 08:23:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:35 Get A/D filter: -9.255963e+061 result=40 08:23:35 Get A/D value=-858993460 result=40 08:23:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:35 Parameters OK 08:23:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:35 Set A/D data flow result=40 08:23:35 Set A/D channel type result=40 08:23:35 Set A/D encoding result=40 08:23:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:35 Set channel filter=0.000000e+000 result=40 08:23:35 Config A/D Result=40 08:23:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:35 Get A/D filter: -9.255963e+061 result=40 08:23:35 Get A/D value=-858993460 result=40 08:23:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:23:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:23:35 Aux= 08:23:35 Message to Camera, serial 58807 queued 08:24:11 Received message from Master: op=PointingHead serial=58820 08:24:11 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:24:11 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:24:12 Point started: ret=0 08:24:12 point_skyscan result=0 08:24:13 Check angles 08:24:13 SkyScan query 08:24:13 SkyScan query done: ret=0 az=64.065<-4271 ze=66.555<-7563 Statuses=0009 0008 08:24:13 Msec=0 True Az=64.065 Ze=66.555 Az status=0009 Ze status=0008 08:24:13 Check angles 08:24:13 SkyScan query 08:24:14 SkyScan query done: ret=0 az=81.495<-5433 ze=66.51<-7566 Statuses=0009 0008 08:24:14 Msec=750 True Az=81.495 Ze=66.51 Az status=0009 Ze status=0008 08:24:14 Check angles 08:24:14 SkyScan query 08:24:15 SkyScan query done: ret=0 az=99.48<-6632 ze=66.495<-7567 Statuses=0009 0008 08:24:15 Msec=1500 True Az=99.48 Ze=66.495 Az status=0009 Ze status=0008 08:24:15 Check angles 08:24:15 SkyScan query 08:24:15 SkyScan query done: ret=0 az=117.345<-7823 ze=66.495<-7567 Statuses=0009 0008 08:24:15 Msec=2250 True Az=117.345 Ze=66.495 Az status=0009 Ze status=0008 08:24:16 Check angles 08:24:16 SkyScan query 08:24:16 SkyScan query done: ret=0 az=134.97<-8998 ze=66.495<-7567 Statuses=0009 0008 08:24:16 Msec=3000 True Az=134.97 Ze=66.495 Az status=0009 Ze status=0008 08:24:16 Check angles 08:24:16 SkyScan query 08:24:17 SkyScan query done: ret=0 az=152.565<-10171 ze=66.495<-7567 Statuses=0009 0008 08:24:17 Msec=3750 True Az=152.565 Ze=66.495 Az status=0009 Ze status=0008 08:24:17 Check angles 08:24:17 SkyScan query 08:24:18 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:24:18 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 08:24:18 Message to Master queued w/err=0: serial=58820 error=0 08:24:23 Received message from Master: op=Filter serial=58821 08:24:23 Color wheel filter change from 0 to 0 08:24:23 FLIGetFilterPos err=0 currentPosition=0 08:24:23 FLIGetStepsRemaining err=0 RemainingSteps=0 08:24:23 Filter is already there-color wheel unchanged 08:24:23 Received message from Master: op=Shutter serial=58822 08:24:23 Shutter LASER close 08:24:23 Received message from Camera: op=State serial=58824 08:24:23 GetSingleValue result=40 Value=cccccccc 08:24:23 SkyScan query 08:24:23 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:24:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:23 Parameters OK 08:24:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:23 Set A/D data flow result=40 08:24:23 Set A/D channel type result=40 08:24:23 Set A/D encoding result=40 08:24:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:23 Set channel filter=0.000000e+000 result=40 08:24:23 Config A/D Result=40 08:24:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:23 Get A/D filter: -9.255963e+061 result=40 08:24:23 Get A/D value=-858993460 result=40 08:24:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:23 Parameters OK 08:24:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:23 Set A/D data flow result=40 08:24:23 Set A/D channel type result=40 08:24:23 Set A/D encoding result=40 08:24:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:23 Set channel filter=0.000000e+000 result=40 08:24:23 Config A/D Result=40 08:24:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:23 Get A/D filter: -9.255963e+061 result=40 08:24:23 Get A/D value=-858993460 result=40 08:24:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:23 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:24:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:24:23 Aux= 08:24:23 Message to Camera, serial 58824 queued 08:25:00 Received message from Master: op=PointingHead serial=58837 08:25:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:25:00 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:25:01 Point started: ret=0 08:25:01 point_skyscan result=0 08:25:01 Check angles 08:25:01 SkyScan query 08:25:02 SkyScan query done: ret=0 az=134.61<-8974 ze=36.42<-9572 Statuses=0009 0009 08:25:02 Msec=0 True Az=134.61 Ze=36.42 Az status=0009 Ze status=0009 08:25:02 Check angles 08:25:02 SkyScan query 08:25:03 SkyScan query done: ret=0 az=116.91<-7794 ze=15.03<-10998 Statuses=0009 0009 08:25:03 Msec=750 True Az=116.91 Ze=15.03 Az status=0009 Ze status=0009 08:25:03 Check angles 08:25:03 SkyScan query 08:25:03 SkyScan query done: ret=0 az=99.45<-6630 ze=-5.925<-12395 Statuses=0009 0009 08:25:03 Msec=1500 True Az=99.45 Ze=-5.925 Az status=0009 Ze status=0009 08:25:04 Check angles 08:25:04 SkyScan query 08:25:04 SkyScan query done: ret=0 az=82.02<-5468 ze=-26.895<-13793 Statuses=0009 0009 08:25:04 Msec=2250 True Az=82.02 Ze=-26.895 Az status=0009 Ze status=0009 08:25:04 Check angles 08:25:04 SkyScan query 08:25:05 SkyScan query done: ret=0 az=64.47<-4298 ze=-38.565<-14571 Statuses=0009 0008 08:25:05 Msec=3000 True Az=64.47 Ze=-38.565 Az status=0009 Ze status=0008 08:25:05 Check angles 08:25:05 SkyScan query 08:25:06 SkyScan query done: ret=0 az=47.085<-3139 ze=-38.535<-14569 Statuses=0009 0008 08:25:06 Msec=3750 True Az=47.085 Ze=-38.535 Az status=0009 Ze status=0008 08:25:06 Check angles 08:25:06 SkyScan query 08:25:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:25:06 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:25:06 Message to Master queued w/err=0: serial=58837 error=0 08:25:11 Received message from Master: op=Filter serial=58838 08:25:11 Color wheel filter change from 0 to 0 08:25:11 FLIGetFilterPos err=0 currentPosition=0 08:25:11 FLIGetStepsRemaining err=0 RemainingSteps=0 08:25:11 Filter is already there-color wheel unchanged 08:25:12 Received message from Master: op=Shutter serial=58839 08:25:12 Shutter LASER close 08:25:12 Received message from Camera: op=State serial=58841 08:25:12 GetSingleValue result=40 Value=cccccccc 08:25:12 SkyScan query 08:25:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:25:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:12 Parameters OK 08:25:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:12 Set A/D data flow result=40 08:25:12 Set A/D channel type result=40 08:25:12 Set A/D encoding result=40 08:25:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:12 Set channel filter=0.000000e+000 result=40 08:25:12 Config A/D Result=40 08:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:12 Get A/D filter: -9.255963e+061 result=40 08:25:12 Get A/D value=-858993460 result=40 08:25:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:12 Parameters OK 08:25:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:12 Set A/D data flow result=40 08:25:12 Set A/D channel type result=40 08:25:12 Set A/D encoding result=40 08:25:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:12 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-11 08:25:12] 08:25:12 Config A/D Result=40 08:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:12 Get A/D filter: -9.255963e+061 result=40 08:25:12 Get A/D value=-858993460 result=40 08:25:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:25:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:25:12 Aux= 08:25:12 Message to Camera, serial 58841 queued 08:25:49 Received message from Master: op=PointingHead serial=58854 08:25:49 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:25:49 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:25:49 Point started: ret=0 08:25:49 point_skyscan result=0 08:25:50 Check angles 08:25:50 SkyScan query 08:25:51 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.13<-16542 Statuses=0009 0009 08:25:51 Msec=0 True Az=63.87 Ze=-68.13 Az status=0009 Ze status=0009 08:25:51 Check angles 08:25:51 SkyScan query 08:25:52 SkyScan query done: ret=0 az=81.285<-5419 ze=-89.1<-17940 Statuses=0009 0009 08:25:52 Msec=750 True Az=81.285 Ze=-89.1 Az status=0009 Ze status=0009 08:25:52 Check angles 08:25:52 SkyScan query 08:25:52 SkyScan query done: ret=0 az=98.865<-6591 ze=-110.07<-19338 Statuses=0009 0009 08:25:52 Msec=1500 True Az=98.865 Ze=-110.07 Az status=0009 Ze status=0009 08:25:52 Check angles 08:25:52 SkyScan query 08:25:53 SkyScan query done: ret=0 az=116.4<-7760 ze=-131.025<-20735 Statuses=0009 0009 08:25:53 Msec=2250 True Az=116.4 Ze=-131.025 Az status=0009 Ze status=0009 08:25:53 Check angles 08:25:53 SkyScan query 08:25:54 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 08:25:54 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 08:25:54 Check angles 08:25:54 SkyScan query 08:25:55 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:25:55 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:25:55 Message to Master queued w/err=0: serial=58854 error=0 08:26:00 Received message from Master: op=Filter serial=58855 08:26:00 Color wheel filter change from 0 to 0 08:26:00 FLIGetFilterPos err=0 currentPosition=0 08:26:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:26:00 Filter is already there-color wheel unchanged 08:26:00 Received message from Master: op=Shutter serial=58856 08:26:00 Shutter LASER close 08:26:00 Received message from Camera: op=State serial=58858 08:26:00 GetSingleValue result=40 Value=cccccccc 08:26:00 SkyScan query 08:26:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:26:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:00 Parameters OK 08:26:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:00 Set A/D data flow result=40 08:26:00 Set A/D channel type result=40 08:26:00 Set A/D encoding result=40 08:26:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:00 Set channel filter=0.000000e+000 result=40 08:26:00 Config A/D Result=40 08:26:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:00 Get A/D filter: -9.255963e+061 result=40 08:26:00 Get A/D value=-858993460 result=40 08:26:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:00 Parameters OK 08:26:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:00 Set A/D data flow result=40 08:26:00 Set A/D channel type result=40 08:26:00 Set A/D encoding result=40 08:26:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:00 Set channel filter=0.000000e+000 result=40 08:26:00 Config A/D Result=40 08:26:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:00 Get A/D filter: -9.255963e+061 result=40 08:26:00 Get A/D value=-858993460 result=40 08:26:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:00 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:26:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:26:00 Aux= 08:26:00 Message to Camera, serial 58858 queued 08:26:36 Received message from Master: op=PointingHead serial=58870 08:26:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:26:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:26:37 Point started: ret=0 08:26:37 point_skyscan result=0 08:26:37 Check angles 08:26:37 SkyScan query 08:26:38 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.91<-23394 Statuses=0009 0009 08:26:38 Msec=0 True Az=113.01 Ze=-170.91 Az status=0009 Ze status=0009 08:26:38 Check angles 08:26:38 SkyScan query 08:26:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:26:39 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:26:39 Message to Master queued w/err=0: serial=58870 error=0 08:26:44 Received message from Master: op=Filter serial=58871 08:26:44 Color wheel filter change from 0 to 0 08:26:44 FLIGetFilterPos err=0 currentPosition=0 08:26:44 FLIGetStepsRemaining err=0 RemainingSteps=0 08:26:44 Filter is already there-color wheel unchanged 08:26:44 Received message from Master: op=Shutter serial=58872 08:26:44 Shutter LASER open 08:26:44 Received message from Camera: op=State serial=58874 08:26:44 GetSingleValue result=40 Value=cccccccc 08:26:44 SkyScan query 08:26:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:26:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:45 Parameters OK 08:26:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:45 Set A/D data flow result=40 08:26:45 Set A/D channel type result=40 08:26:45 Set A/D encoding result=40 08:26:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:45 Set channel filter=0.000000e+000 result=40 08:26:45 Config A/D Result=40 08:26:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:45 Get A/D filter: -9.255963e+061 result=40 08:26:45 Get A/D value=-858993460 result=40 08:26:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:45 Parameters OK 08:26:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:45 Set A/D data flow result=40 08:26:45 Set A/D channel type result=40 08:26:45 Set A/D encoding result=40 08:26:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:45 Set channel filter=0.000000e+000 result=40 08:26:45 Config A/D Result=40 08:26:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:45 Get A/D filter: -9.255963e+061 result=40 08:26:45 Get A/D value=-858993460 result=40 08:26:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:26:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:26:45 Aux= 08:26:45 Message to Camera, serial 58874 queued 08:26:53 Received message from Master: op=Shutter serial=58884 08:26:53 Shutter LASER close 08:26:54 Received message from Master: op=PointingHead serial=58888 08:26:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:26:54 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:26:54 Point started: ret=0 08:26:54 point_skyscan result=0 08:26:55 Check angles 08:26:55 SkyScan query 08:26:55 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.31<-21554 Statuses=0009 0009 08:26:55 Msec=0 True Az=135.945 Ze=-143.31 Az status=0009 Ze status=0009 08:26:55 Check angles 08:26:55 SkyScan query 08:26:56 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.34<-20156 Statuses=0009 0009 08:26:56 Msec=750 True Az=153.36 Ze=-122.34 Az status=0009 Ze status=0009 08:26:56 Check angles 08:26:56 SkyScan query 08:26:57 SkyScan query done: ret=0 az=171.3<-11420 ze=-100.95<-18730 Statuses=0009 0009 08:26:57 Msec=1500 True Az=171.3 Ze=-100.95 Az status=0009 Ze status=0009 08:26:57 Check angles 08:26:57 SkyScan query 08:26:58 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.04<-17336 Statuses=0008 0009 08:26:58 Msec=2250 True Az=176.025 Ze=-80.04 Az status=0008 Ze status=0009 08:26:58 Check angles 08:26:58 SkyScan query 08:26:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.025<-15935 Statuses=0008 0009 08:26:58 Msec=3000 True Az=176.01 Ze=-59.025 Az status=0008 Ze status=0009 08:26:58 Check angles 08:26:58 SkyScan query 08:26:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:26:59 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:26:59 Message to Master queued w/err=0: serial=58888 error=0 08:27:04 Received message from Master: op=Filter serial=58889 08:27:04 Color wheel filter change from 0 to 0 08:27:04 FLIGetFilterPos err=0 currentPosition=0 08:27:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:27:04 Filter is already there-color wheel unchanged 08:27:04 Received message from Master: op=Shutter serial=58890 08:27:04 Shutter LASER close 08:27:04 Received message from Camera: op=State serial=58892 08:27:04 GetSingleValue result=40 Value=cccccccc 08:27:04 SkyScan query 08:27:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:27:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:05 Parameters OK 08:27:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:05 Set A/D data flow result=40 08:27:05 Set A/D channel type result=40 08:27:05 Set A/D encoding result=40 08:27:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:05 Set channel filter=0.000000e+000 result=40 08:27:05 Config A/D Result=40 08:27:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:05 Get A/D filter: -9.255963e+061 result=40 08:27:05 Get A/D value=-858993460 result=40 08:27:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:05 Parameters OK 08:27:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:05 Set A/D data flow result=40 08:27:05 Set A/D channel type result=40 08:27:05 Set A/D encoding result=40 08:27:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:05 Set channel filter=0.000000e+000 result=40 08:27:05 Config A/D Result=40 08:27:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:05 Get A/D filter: -9.255963e+061 result=40 08:27:05 Get A/D value=-858993460 result=40 08:27:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:27:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:27:05 Aux= 08:27:05 Message to Camera, serial 58892 queued 08:27:42 Received message from Master: op=PointingHead serial=58905 08:27:42 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:27:42 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:27:42 Point started: ret=0 08:27:42 point_skyscan result=0 08:27:43 Check angles 08:27:43 SkyScan query 08:27:43 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.75<-13450 Statuses=0009 0009 08:27:43 Msec=0 True Az=152.985 Ze=-21.75 Az status=0009 Ze status=0009 08:27:44 Check angles 08:27:44 SkyScan query 08:27:44 SkyScan query done: ret=0 az=135.48<-9032 ze=-0.75<-12050 Statuses=0009 0009 08:27:44 Msec=750 True Az=135.48 Ze=-0.75 Az status=0009 Ze status=0009 08:27:44 Check angles 08:27:44 SkyScan query 08:27:45 SkyScan query done: ret=0 az=118.005<-7867 ze=20.175<-10655 Statuses=0009 0009 08:27:45 Msec=1500 True Az=118.005 Ze=20.175 Az status=0009 Ze status=0009 08:27:45 Check angles 08:27:45 SkyScan query 08:27:46 SkyScan query done: ret=0 az=100.5<-6700 ze=41.145<-9257 Statuses=0009 0009 08:27:46 Msec=2250 True Az=100.5 Ze=41.145 Az status=0009 Ze status=0009 08:27:46 Check angles 08:27:46 SkyScan query 08:27:46 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 08:27:46 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 08:27:47 Check angles 08:27:47 SkyScan query 08:27:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:27:47 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:27:47 Message to Master queued w/err=0: serial=58905 error=0 08:27:52 Received message from Master: op=Filter serial=58906 08:27:52 Color wheel filter change from 0 to 0 08:27:52 FLIGetFilterPos err=0 currentPosition=0 08:27:52 FLIGetStepsRemaining err=0 RemainingSteps=0 08:27:52 Filter is already there-color wheel unchanged 08:27:52 Received message from Master: op=Shutter serial=58907 08:27:52 Shutter LASER close 08:27:52 Received message from Camera: op=State serial=58909 08:27:52 GetSingleValue result=40 Value=cccccccc 08:27:52 SkyScan query 08:27:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:27:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:53 Parameters OK 08:27:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:53 Set A/D data flow result=40 08:27:53 Set A/D channel type result=40 08:27:53 Set A/D encoding result=40 08:27:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:53 Set channel filter=0.000000e+000 result=40 08:27:53 Config A/D Result=40 08:27:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:53 Get A/D filter: -9.255963e+061 result=40 08:27:53 Get A/D value=-858993460 result=40 08:27:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:53 Parameters OK 08:27:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:53 Set A/D data flow result=40 08:27:53 Set A/D channel type result=40 08:27:53 Set A/D encoding result=40 08:27:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:53 Set channel filter=0.000000e+000 result=40 08:27:53 Config A/D Result=40 08:27:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:53 Get A/D filter: -9.255963e+061 result=40 08:27:53 Get A/D value=-858993460 result=40 08:27:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:27:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:27:53 Aux= 08:27:53 Message to Camera, serial 58909 queued 08:28:30 Received message from Master: op=PointingHead serial=58922 08:28:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:28:30 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:28:30 Point started: ret=0 08:28:30 point_skyscan result=0 08:28:31 Check angles 08:28:31 SkyScan query 08:28:32 SkyScan query done: ret=0 az=108.9<-7260 ze=38.49<-9434 Statuses=0009 0008 08:28:32 Msec=0 True Az=108.9 Ze=38.49 Az status=0009 Ze status=0008 08:28:32 Check angles 08:28:32 SkyScan query 08:28:32 SkyScan query done: ret=0 az=126.495<-8433 ze=38.505<-9433 Statuses=0009 0008 08:28:32 Msec=750 True Az=126.495 Ze=38.505 Az status=0009 Ze status=0008 08:28:32 Check angles 08:28:32 SkyScan query 08:28:33 SkyScan query done: ret=0 az=143.94<-9596 ze=38.505<-9433 Statuses=0009 0008 08:28:33 Msec=1500 True Az=143.94 Ze=38.505 Az status=0009 Ze status=0008 08:28:33 Check angles 08:28:33 SkyScan query 08:28:34 SkyScan query done: ret=0 az=161.355<-10757 ze=38.505<-9433 Statuses=0009 0008 08:28:34 Msec=2250 True Az=161.355 Ze=38.505 Az status=0009 Ze status=0008 08:28:34 Check angles 08:28:34 SkyScan query 08:28:35 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 08:28:35 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 08:28:35 Check angles 08:28:35 SkyScan query 08:28:35 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:28:35 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:28:35 Message to Master queued w/err=0: serial=58922 error=0 08:28:40 Received message from Master: op=Filter serial=58923 08:28:40 Color wheel filter change from 0 to 0 08:28:40 FLIGetFilterPos err=0 currentPosition=0 08:28:40 FLIGetStepsRemaining err=0 RemainingSteps=0 08:28:40 Filter is already there-color wheel unchanged 08:28:40 Received message from Master: op=Shutter serial=58924 08:28:40 Shutter LASER close 08:28:41 Received message from Camera: op=State serial=58926 08:28:41 GetSingleValue result=40 Value=cccccccc 08:28:41 SkyScan query 08:28:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:28:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:41 Parameters OK 08:28:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:41 Set A/D data flow result=40 08:28:41 Set A/D channel type result=40 08:28:41 Set A/D encoding result=40 08:28:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:41 Set channel filter=0.000000e+000 result=40 08:28:41 Config A/D Result=40 08:28:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:41 Get A/D filter: -9.255963e+061 result=40 08:28:41 Get A/D value=-858993460 result=40 08:28:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:41 Parameters OK 08:28:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:41 Set A/D data flow result=40 08:28:41 Set A/D channel type result=40 08:28:41 Set A/D encoding result=40 08:28:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:41 Set channel filter=0.000000e+000 result=40 08:28:41 Config A/D Result=40 08:28:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:41 Get A/D filter: -9.255963e+061 result=40 08:28:41 Get A/D value=-858993460 result=40 08:28:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:28:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:28:41 Aux= 08:28:41 Message to Camera, serial 58926 queued 08:29:18 Received message from Master: op=PointingHead serial=58939 08:29:18 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:29:18 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:29:18 Point started: ret=0 08:29:18 point_skyscan result=0 08:29:19 Check angles 08:29:19 SkyScan query 08:29:20 SkyScan query done: ret=0 az=152.925<-10195 ze=8.655<-11423 Statuses=0009 0009 08:29:20 Msec=0 True Az=152.925 Ze=8.655 Az status=0009 Ze status=0009 08:29:20 Check angles 08:29:20 SkyScan query 08:29:20 SkyScan query done: ret=0 az=135.48<-9032 ze=-12.375<-12825 Statuses=0009 0009 08:29:20 Msec=750 True Az=135.48 Ze=-12.375 Az status=0009 Ze status=0009 08:29:21 Check angles 08:29:21 SkyScan query 08:29:21 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.675<-14245 Statuses=0009 0009 08:29:21 Msec=1500 True Az=117.54 Ze=-33.675 Az status=0009 Ze status=0009 08:29:21 Check angles 08:29:21 SkyScan query 08:29:22 SkyScan query done: ret=0 az=100.185<-6679 ze=-51.555<-15437 Statuses=0009 0009 08:29:22 Msec=2250 True Az=100.185 Ze=-51.555 Az status=0009 Ze status=0009 08:29:22 Check angles 08:29:22 SkyScan query 08:29:23 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 08:29:23 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 08:29:23 Check angles 08:29:23 SkyScan query 08:29:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:29:23 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:29:23 Message to Master queued w/err=0: serial=58939 error=0 08:29:28 Received message from Master: op=Filter serial=58940 08:29:28 Color wheel filter change from 0 to 0 08:29:28 FLIGetFilterPos err=0 currentPosition=0 08:29:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:29:28 Filter is already there-color wheel unchanged 08:29:29 Received message from Master: op=Shutter serial=58941 08:29:29 Shutter LASER close 08:29:29 Received message from Camera: op=State serial=58943 08:29:29 GetSingleValue result=40 Value=cccccccc 08:29:29 SkyScan query 08:29:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:29:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:29 Parameters OK 08:29:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:29 Set A/D data flow result=40 08:29:29 Set A/D channel type result=40 08:29:29 Set A/D encoding result=40 08:29:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:29 Set channel filter=0.000000e+000 result=40 08:29:29 Config A/D Result=40 08:29:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:29 Get A/D filter: -9.255963e+061 result=40 08:29:29 Get A/D value=-858993460 result=40 08:29:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:29 Parameters OK 08:29:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:29 Set A/D data flow result=40 08:29:29 Set A/D channel type result=40 08:29:29 Set A/D encoding result=40 08:29:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:29 Set channel filter=0.000000e+000 result=40 08:29:29 Config A/D Result=40 08:29:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:29 Get A/D filter: -9.255963e+061 result=40 08:29:29 Get A/D value=-858993460 result=40 08:29:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:29:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:29:29 Aux= 08:29:29 Message to Camera, serial 58943 queued 08:30:06 Received message from Master: op=PointingHead serial=58956 08:30:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:30:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:30:06 Point started: ret=0 08:30:06 point_skyscan result=0 08:30:07 Check angles 08:30:07 SkyScan query 08:30:08 SkyScan query done: ret=0 az=109.05<-7270 ze=-81.03<-17402 Statuses=0009 0009 08:30:08 Msec=0 True Az=109.05 Ze=-81.03 Az status=0009 Ze status=0009 08:30:08 Check angles 08:30:08 SkyScan query 08:30:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-102<-18800 Statuses=0008 0009 08:30:08 Msec=750 True Az=112.995 Ze=-102 Az status=0008 Ze status=0009 08:30:09 Check angles 08:30:09 SkyScan query 08:30:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 08:30:09 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 08:30:09 Check angles 08:30:09 SkyScan query 08:30:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.78<-21652 Statuses=0008 0009 08:30:10 Msec=2250 True Az=112.995 Ze=-144.78 Az status=0008 Ze status=0009 08:30:10 Check angles 08:30:10 SkyScan query 08:30:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.72<-23048 Statuses=0008 0009 08:30:11 Msec=3000 True Az=112.995 Ze=-165.72 Az status=0008 Ze status=0009 08:30:11 Check angles 08:30:11 SkyScan query 08:30:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:30:11 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:30:11 Message to Master queued w/err=0: serial=58956 error=0 08:30:16 Received message from Master: op=Filter serial=58957 08:30:16 Color wheel filter change from 0 to 0 08:30:16 FLIGetFilterPos err=0 currentPosition=0 08:30:16 FLIGetStepsRemaining err=0 RemainingSteps=0 08:30:16 Filter is already there-color wheel unchanged 08:30:17 Received message from Master: op=Shutter serial=58958 08:30:17 Shutter LASER open 08:30:17 Received message from Camera: op=State serial=58960 08:30:17 GetSingleValue result=40 Value=cccccccc 08:30:17 SkyScan query 08:30:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:30:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:17 Parameters OK 08:30:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:17 Set A/D data flow result=40 08:30:17 Set A/D channel type result=40 08:30:17 Set A/D encoding result=40 08:30:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:17 Set channel filter=0.000000e+000 result=40 08:30:17 Config A/D Result=40 08:30:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:17 Get A/D filter: -9.255963e+061 result=40 08:30:17 Get A/D value=-858993460 result=40 08:30:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:17 Parameters OK 08:30:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:17 Set A/D data flow result=40 08:30:17 Set A/D channel type result=40 08:30:17 Set A/D encoding result=40 08:30:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:17 Set channel filter=0.000000e+000 result=40 08:30:17 Config A/D Result=40 08:30:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:17 Get A/D filter: -9.255963e+061 result=40 08:30:17 Get A/D value=-858993460 result=40 08:30:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:30:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:30:17 Aux= 08:30:17 Message to Camera, serial 58960 queued 08:30:26 Received message from Master: op=Shutter serial=58970 08:30:26 Shutter LASER close 08:30:26 Received message from Master: op=PointingHead serial=58974 08:30:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:30:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:30:27 Point started: ret=0 08:30:27 point_skyscan result=0 08:30:27 Check angles 08:30:27 SkyScan query 08:30:28 SkyScan query done: ret=0 az=89.235<-5949 ze=156.45<-1570 Statuses=0009 0009 08:30:28 Msec=0 True Az=89.235 Ze=156.45 Az status=0009 Ze status=0009 08:30:28 Check angles 08:30:28 SkyScan query 08:30:29 SkyScan query done: ret=0 az=72.075<-4805 ze=135.93<-2938 Statuses=0009 0009 08:30:29 Msec=750 True Az=72.075 Ze=135.93 Az status=0009 Ze status=0009 08:30:29 Check angles 08:30:29 SkyScan query 08:30:30 SkyScan query done: ret=0 az=54.42<-3628 ze=114.51<-4366 Statuses=0009 0009 08:30:30 Msec=1500 True Az=54.42 Ze=114.51 Az status=0009 Ze status=0009 08:30:30 Check angles 08:30:30 SkyScan query 08:30:30 SkyScan query done: ret=0 az=40.935<-2729 ze=93.585<-5761 Statuses=0009 0009 08:30:30 Msec=2250 True Az=40.935 Ze=93.585 Az status=0009 Ze status=0009 08:30:31 Check angles 08:30:31 SkyScan query 08:30:31 SkyScan query done: ret=0 az=40.995<-2733 ze=72.585<-7161 Statuses=0008 0009 08:30:31 Msec=3000 True Az=40.995 Ze=72.585 Az status=0008 Ze status=0009 08:30:31 Check angles 08:30:31 SkyScan query 08:30:32 SkyScan query done: ret=0 az=40.995<-2733 ze=52.125<-8525 Statuses=0008 0009 08:30:32 Msec=3750 True Az=40.995 Ze=52.125 Az status=0008 Ze status=0009 08:30:32 Check angles 08:30:32 SkyScan query 08:30:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:30:33 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:30:33 Message to Master queued w/err=0: serial=58974 error=0 08:30:38 Received message from Master: op=Filter serial=58975 08:30:38 Color wheel filter change from 0 to 0 08:30:38 FLIGetFilterPos err=0 currentPosition=0 08:30:38 FLIGetStepsRemaining err=0 RemainingSteps=0 08:30:38 Filter is already there-color wheel unchanged 08:30:38 Received message from Master: op=Shutter serial=58976 08:30:38 Shutter LASER close 08:30:38 Received message from Camera: op=State serial=58978 08:30:38 GetSingleValue result=40 Value=cccccccc 08:30:38 SkyScan query 08:30:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:30:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:39 Parameters OK 08:30:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:39 Set A/D data flow result=40 08:30:39 Set A/D channel type result=40 08:30:39 Set A/D encoding result=40 08:30:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:39 Set channel filter=0.000000e+000 result=40 08:30:39 Config A/D Result=40 08:30:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:39 Get A/D filter: -9.255963e+061 result=40 08:30:39 Get A/D value=-858993460 result=40 08:30:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:39 Parameters OK 08:30:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:39 Set A/D data flow result=40 08:30:39 Set A/D channel type result=40 08:30:39 Set A/D encoding result=40 08:30:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:39 Set channel filter=0.000000e+000 result=40 08:30:39 Config A/D Result=40 08:30:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:39 Get A/D filter: -9.255963e+061 result=40 08:30:39 Get A/D value=-858993460 result=40 08:30:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:30:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:30:39 Aux= 08:30:39 Message to Camera, serial 58978 queued 08:31:15 Received message from Master: op=PointingHead serial=58991 08:31:15 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:31:15 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:31:16 Point started: ret=0 08:31:16 point_skyscan result=0 08:31:16 Check angles 08:31:16 SkyScan query 08:31:17 SkyScan query done: ret=0 az=63.81<-4254 ze=66.555<-7563 Statuses=0009 0008 08:31:17 Msec=0 True Az=63.81 Ze=66.555 Az status=0009 Ze status=0008 08:31:17 Check angles 08:31:17 SkyScan query 08:31:18 SkyScan query done: ret=0 az=81.57<-5438 ze=66.51<-7566 Statuses=0009 0008 08:31:18 Msec=750 True Az=81.57 Ze=66.51 Az status=0009 Ze status=0008 08:31:18 Check angles 08:31:18 SkyScan query 08:31:19 SkyScan query done: ret=0 az=99.135<-6609 ze=66.495<-7567 Statuses=0009 0008 08:31:19 Msec=1500 True Az=99.135 Ze=66.495 Az status=0009 Ze status=0008 08:31:19 Check angles 08:31:19 SkyScan query 08:31:19 SkyScan query done: ret=0 az=116.745<-7783 ze=66.495<-7567 Statuses=0009 0008 08:31:19 Msec=2250 True Az=116.745 Ze=66.495 Az status=0009 Ze status=0008 08:31:19 Check angles 08:31:19 SkyScan query 08:31:20 SkyScan query done: ret=0 az=134.235<-8949 ze=66.495<-7567 Statuses=0009 0008 08:31:20 Msec=3000 True Az=134.235 Ze=66.495 Az status=0009 Ze status=0008 08:31:20 Check angles 08:31:20 SkyScan query 08:31:21 SkyScan query done: ret=0 az=151.605<-10107 ze=66.495<-7567 Statuses=0009 0008 08:31:21 Msec=3750 True Az=151.605 Ze=66.495 Az status=0009 Ze status=0008 08:31:21 Check angles 08:31:21 SkyScan query 08:31:22 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:31:22 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 08:31:22 Message to Master queued w/err=0: serial=58991 error=0 08:31:27 Received message from Master: op=Filter serial=58992 08:31:27 Color wheel filter change from 0 to 0 08:31:27 FLIGetFilterPos err=0 currentPosition=0 08:31:27 FLIGetStepsRemaining err=0 RemainingSteps=0 08:31:27 Filter is already there-color wheel unchanged 08:31:27 Received message from Master: op=Shutter serial=58993 08:31:27 Shutter LASER close 08:31:27 Received message from Camera: op=State serial=58995 08:31:27 GetSingleValue result=40 Value=cccccccc 08:31:27 SkyScan query 08:31:27 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:31:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:27 Parameters OK 08:31:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:27 Set A/D data flow result=40 08:31:27 Set A/D channel type result=40 08:31:27 Set A/D encoding result=40 08:31:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:27 Set channel filter=0.000000e+000 result=40 08:31:27 Config A/D Result=40 08:31:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:27 Get A/D filter: -9.255963e+061 result=40 08:31:27 Get A/D value=-858993460 result=40 08:31:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:27 Parameters OK 08:31:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:27 Set A/D data flow result=40 08:31:27 Set A/D channel type result=40 08:31:27 Set A/D encoding result=40 08:31:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:27 Set channel filter=0.000000e+000 result=40 08:31:27 Config A/D Result=40 08:31:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:27 Get A/D filter: -9.255963e+061 result=40 08:31:27 Get A/D value=-858993460 result=40 08:31:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:27 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:31:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:31:27 Aux= 08:31:27 Message to Camera, serial 58995 queued 08:32:04 Received message from Master: op=PointingHead serial=59008 08:32:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:32:04 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:32:05 Point started: ret=0 08:32:05 point_skyscan result=0 08:32:05 Check angles 08:32:05 SkyScan query 08:32:06 SkyScan query done: ret=0 az=134.79<-8986 ze=36.645<-9557 Statuses=0009 0009 08:32:06 Msec=0 True Az=134.79 Ze=36.645 Az status=0009 Ze status=0009 08:32:06 Check angles 08:32:06 SkyScan query 08:32:07 SkyScan query done: ret=0 az=117.42<-7828 ze=15.705<-10953 Statuses=0009 0009 08:32:07 Msec=750 True Az=117.42 Ze=15.705 Az status=0009 Ze status=0009 08:32:07 Check angles 08:32:07 SkyScan query 08:32:07 SkyScan query done: ret=0 az=100.035<-6669 ze=-5.265<-12351 Statuses=0009 0009 08:32:07 Msec=1500 True Az=100.035 Ze=-5.265 Az status=0009 Ze status=0009 08:32:08 Check angles 08:32:08 SkyScan query 08:32:08 SkyScan query done: ret=0 az=82.185<-5479 ze=-26.625<-13775 Statuses=0009 0009 08:32:08 Msec=2250 True Az=82.185 Ze=-26.625 Az status=0009 Ze status=0009 08:32:08 Check angles 08:32:08 SkyScan query 08:32:09 SkyScan query done: ret=0 az=64.635<-4309 ze=-38.565<-14571 Statuses=0009 0008 08:32:09 Msec=3000 True Az=64.635 Ze=-38.565 Az status=0009 Ze status=0008 08:32:09 Check angles 08:32:09 SkyScan query 08:32:10 SkyScan query done: ret=0 az=47.16<-3144 ze=-38.535<-14569 Statuses=0009 0008 08:32:10 Msec=3750 True Az=47.16 Ze=-38.535 Az status=0009 Ze status=0008 08:32:10 Check angles 08:32:10 SkyScan query 08:32:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:32:10 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:32:10 Message to Master queued w/err=0: serial=59008 error=0 08:32:15 Received message from Master: op=Filter serial=59009 08:32:15 Color wheel filter change from 0 to 0 08:32:15 FLIGetFilterPos err=0 currentPosition=0 08:32:15 FLIGetStepsRemaining err=0 RemainingSteps=0 08:32:15 Filter is already there-color wheel unchanged 08:32:16 Received message from Master: op=Shutter serial=59010 08:32:16 Shutter LASER close 08:32:16 Received message from Camera: op=State serial=59012 08:32:16 GetSingleValue result=40 Value=cccccccc 08:32:16 SkyScan query 08:32:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:32:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:16 Parameters OK 08:32:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:16 Set A/D data flow result=40 08:32:16 Set A/D channel type result=40 08:32:16 Set A/D encoding result=40 08:32:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:16 Set channel filter=0.000000e+000 result=40 08:32:16 Config A/D Result=40 08:32:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:16 Get A/D filter: -9.255963e+061 result=40 08:32:16 Get A/D value=-858993460 result=40 08:32:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:16 Parameters OK 08:32:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:16 Set A/D data flow result=40 08:32:16 Set A/D channel type result=40 08:32:16 Set A/D encoding result=40 08:32:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:16 Set channel filter=0.000000e+000 result=40 08:32:16 Config A/D Result=40 08:32:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:16 Get A/D filter: -9.255963e+061 result=40 08:32:16 Get A/D value=-858993460 result=40 08:32:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:32:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:32:16 Aux= 08:32:16 Message to Camera, serial 59012 queued 08:32:52 Received message from Master: op=PointingHead serial=59024 08:32:52 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:32:52 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:32:52 Point started: ret=0 08:32:52 point_skyscan result=0 08:32:53 Check angles 08:32:53 SkyScan query 08:32:54 SkyScan query done: ret=0 az=64.065<-4271 ze=-68.355<-16557 Statuses=0009 0009 08:32:54 Msec=0 True Az=64.065 Ze=-68.355 Az status=0009 Ze status=0009 08:32:54 Check angles 08:32:54 SkyScan query 08:32:55 SkyScan query done: ret=0 az=81.84<-5456 ze=-89.805<-17987 Statuses=0009 0009 08:32:55 Msec=750 True Az=81.84 Ze=-89.805 Az status=0009 Ze status=0009 08:32:55 Check angles 08:32:55 SkyScan query 08:32:55 SkyScan query done: ret=0 az=99.42<-6628 ze=-110.775<-19385 Statuses=0009 0009 08:32:55 Msec=1500 True Az=99.42 Ze=-110.775 Az status=0009 Ze status=0009 08:32:55 Check angles 08:32:55 SkyScan query 08:32:56 SkyScan query done: ret=0 az=116.925<-7795 ze=-131.7<-20780 Statuses=0009 0009 08:32:56 Msec=2250 True Az=116.925 Ze=-131.7 Az status=0009 Ze status=0009 08:32:56 Check angles 08:32:56 SkyScan query 08:32:57 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.555<-21437 Statuses=0009 0008 08:32:57 Msec=3000 True Az=131.1 Ze=-141.555 Az status=0009 Ze status=0008 08:32:57 Check angles 08:32:57 SkyScan query 08:32:58 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 08:32:58 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 08:32:58 Message to Master queued w/err=0: serial=59024 error=0 08:33:03 Received message from Master: op=Filter serial=59025 08:33:03 Color wheel filter change from 0 to 0 08:33:03 FLIGetFilterPos err=0 currentPosition=0 08:33:03 FLIGetStepsRemaining err=0 RemainingSteps=0 08:33:03 Filter is already there-color wheel unchanged 08:33:03 Received message from Master: op=Shutter serial=59026 08:33:03 Shutter LASER close 08:33:03 Received message from Camera: op=State serial=59028 08:33:03 GetSingleValue result=40 Value=cccccccc 08:33:03 SkyScan query 08:33:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:33:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:03 Parameters OK 08:33:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:03 Set A/D data flow result=40 08:33:03 Set A/D channel type result=40 08:33:03 Set A/D encoding result=40 08:33:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:03 Set channel filter=0.000000e+000 result=40 08:33:03 Config A/D Result=40 08:33:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:03 Get A/D filter: -9.255963e+061 result=40 08:33:03 Get A/D value=-858993460 result=40 08:33:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:03 Parameters OK 08:33:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:03 Set A/D data flow result=40 08:33:03 Set A/D channel type result=40 08:33:03 Set A/D encoding result=40 08:33:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:03 Set channel filter=0.000000e+000 result=40 08:33:03 Config A/D Result=40 08:33:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:03 Get A/D filter: -9.255963e+061 result=40 08:33:03 Get A/D value=-858993460 result=40 08:33:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:03 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:33:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:33:03 Aux= 08:33:03 Message to Camera, serial 59028 queued 08:33:40 Received message from Master: op=PointingHead serial=59041 08:33:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:33:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:33:41 Point started: ret=0 08:33:41 point_skyscan result=0 08:33:41 Check angles 08:33:41 SkyScan query 08:33:42 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.075<-23405 Statuses=0009 0009 08:33:42 Msec=0 True Az=113.01 Ze=-171.075 Az status=0009 Ze status=0009 08:33:42 Check angles 08:33:42 SkyScan query 08:33:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:33:43 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:33:43 Message to Master queued w/err=0: serial=59041 error=0 08:33:48 Received message from Master: op=Filter serial=59042 08:33:48 Color wheel filter change from 0 to 0 08:33:48 FLIGetFilterPos err=0 currentPosition=0 08:33:48 FLIGetStepsRemaining err=0 RemainingSteps=0 08:33:48 Filter is already there-color wheel unchanged 08:33:48 Received message from Master: op=Shutter serial=59043 08:33:48 Shutter LASER open 08:33:48 Received message from Camera: op=State serial=59045 08:33:48 GetSingleValue result=40 Value=cccccccc 08:33:48 SkyScan query 08:33:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:33:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:49 Parameters OK 08:33:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:49 Set A/D data flow result=40 08:33:49 Set A/D channel type result=40 08:33:49 Set A/D encoding result=40 08:33:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:49 Set channel filter=0.000000e+000 result=40 08:33:49 Config A/D Result=40 08:33:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:49 Get A/D filter: -9.255963e+061 result=40 08:33:49 Get A/D value=-858993460 result=40 08:33:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:49 Parameters OK 08:33:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:49 Set A/D data flow result=40 08:33:49 Set A/D channel type result=40 08:33:49 Set A/D encoding result=40 08:33:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:49 Set channel filter=0.000000e+000 result=40 08:33:49 Config A/D Result=40 08:33:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:49 Get A/D filter: -9.255963e+061 result=40 08:33:49 Get A/D value=-858993460 result=40 08:33:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:33:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:33:49 Aux= 08:33:49 Message to Camera, serial 59045 queued 08:33:57 Received message from Master: op=Shutter serial=59055 08:33:57 Shutter LASER close 08:33:58 Received message from Master: op=PointingHead serial=59059 08:33:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:33:58 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:33:58 Point started: ret=0 08:33:58 point_skyscan result=0 08:33:59 Check angles 08:33:59 SkyScan query 08:33:59 SkyScan query done: ret=0 az=136.14<-9076 ze=-143.04<-21536 Statuses=0009 0009 08:33:59 Msec=0 True Az=136.14 Ze=-143.04 Az status=0009 Ze status=0009 08:33:59 Check angles 08:33:59 SkyScan query 08:34:00 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.055<-20137 Statuses=0009 0009 08:34:00 Msec=750 True Az=153.615 Ze=-122.055 Az status=0009 Ze status=0009 08:34:00 Check angles 08:34:00 SkyScan query 08:34:01 SkyScan query done: ret=0 az=171.06<-11404 ze=-101.175<-18745 Statuses=0009 0009 08:34:01 Msec=1500 True Az=171.06 Ze=-101.175 Az status=0009 Ze status=0009 08:34:01 Check angles 08:34:01 SkyScan query 08:34:02 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.205<-17347 Statuses=0008 0009 08:34:02 Msec=2250 True Az=176.025 Ze=-80.205 Az status=0008 Ze status=0009 08:34:02 Check angles 08:34:02 SkyScan query 08:34:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.22<-15948 Statuses=0008 0009 08:34:02 Msec=3000 True Az=176.01 Ze=-59.22 Az status=0008 Ze status=0009 08:34:02 Check angles 08:34:02 SkyScan query 08:34:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:34:03 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:34:03 Message to Master queued w/err=0: serial=59059 error=0 08:34:08 Received message from Master: op=Filter serial=59060 08:34:08 Color wheel filter change from 0 to 0 08:34:08 FLIGetFilterPos err=0 currentPosition=0 08:34:08 FLIGetStepsRemaining err=0 RemainingSteps=0 08:34:08 Filter is already there-color wheel unchanged 08:34:08 Received message from Master: op=Shutter serial=59061 08:34:08 Shutter LASER close 08:34:08 Received message from Camera: op=State serial=59063 08:34:08 GetSingleValue result=40 Value=cccccccc 08:34:08 SkyScan query 08:34:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:34:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:09 Parameters OK 08:34:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:09 Set A/D data flow result=40 08:34:09 Set A/D channel type result=40 08:34:09 Set A/D encoding result=40 08:34:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:09 Set channel filter=0.000000e+000 result=40 08:34:09 Config A/D Result=40 08:34:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:09 Get A/D filter: -9.255963e+061 result=40 08:34:09 Get A/D value=-858993460 result=40 08:34:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:09 Parameters OK 08:34:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:09 Set A/D data flow result=40 08:34:09 Set A/D channel type result=40 08:34:09 Set A/D encoding result=40 08:34:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:09 Set channel filter=0.000000e+000 result=40 08:34:09 Config A/D Result=40 08:34:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:09 Get A/D filter: -9.255963e+061 result=40 08:34:09 Get A/D value=-858993460 result=40 08:34:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:34:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:34:09 Aux= 08:34:09 Message to Camera, serial 59063 queued 08:34:46 Received message from Master: op=PointingHead serial=59076 08:34:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:34:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:34:46 Point started: ret=0 08:34:46 point_skyscan result=0 08:34:47 Check angles 08:34:47 SkyScan query 08:34:47 SkyScan query done: ret=0 az=152.625<-10175 ze=-21.195<-13413 Statuses=0009 0009 08:34:47 Msec=0 True Az=152.625 Ze=-21.195 Az status=0009 Ze status=0009 08:34:48 Check angles 08:34:48 SkyScan query 08:34:48 SkyScan query done: ret=0 az=134.715<-8981 ze=0.165<-11989 Statuses=0009 0009 08:34:48 Msec=750 True Az=134.715 Ze=0.165 Az status=0009 Ze status=0009 08:34:48 Check angles 08:34:48 SkyScan query 08:34:49 SkyScan query done: ret=0 az=117.045<-7803 ze=21.165<-10589 Statuses=0009 0009 08:34:49 Msec=1500 True Az=117.045 Ze=21.165 Az status=0009 Ze status=0009 08:34:49 Check angles 08:34:49 SkyScan query 08:34:50 SkyScan query done: ret=0 az=99.78<-6652 ze=42.105<-9193 Statuses=0009 0009 08:34:50 Msec=2250 True Az=99.78 Ze=42.105 Az status=0009 Ze status=0009 08:34:50 Check angles 08:34:50 SkyScan query 08:34:51 SkyScan query done: ret=0 az=86.04<-5736 ze=51.555<-8563 Statuses=0009 0008 08:34:51 Msec=3000 True Az=86.04 Ze=51.555 Az status=0009 Ze status=0008 08:34:51 Check angles 08:34:51 SkyScan query 08:34:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:34:51 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:34:51 Message to Master queued w/err=0: serial=59076 error=0 08:34:56 Received message from Master: op=Filter serial=59077 08:34:56 Color wheel filter change from 0 to 0 08:34:56 FLIGetFilterPos err=0 currentPosition=0 08:34:56 FLIGetStepsRemaining err=0 RemainingSteps=0 08:34:56 Filter is already there-color wheel unchanged 08:34:56 Received message from Master: op=Shutter serial=59078 08:34:56 Shutter LASER close 08:34:56 Received message from Camera: op=State serial=59080 08:34:56 GetSingleValue result=40 Value=cccccccc 08:34:56 SkyScan query 08:34:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:34:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:57 Parameters OK 08:34:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:57 Set A/D data flow result=40 08:34:57 Set A/D channel type result=40 08:34:57 Set A/D encoding result=40 08:34:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:57 Set channel filter=0.000000e+000 result=40 08:34:57 Config A/D Result=40 08:34:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:57 Get A/D filter: -9.255963e+061 result=40 08:34:57 Get A/D value=-858993460 result=40 08:34:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:57 Parameters OK 08:34:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:57 Set A/D data flow result=40 08:34:57 Set A/D channel type result=40 08:34:57 Set A/D encoding result=40 08:34:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:57 Set channel filter=0.000000e+000 result=40 08:34:57 Config A/D Result=40 08:34:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:57 Get A/D filter: -9.255963e+061 result=40 08:34:57 Get A/D value=-858993460 result=40 08:34:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:34:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:34:57 Aux= 08:34:57 Message to Camera, serial 59080 queued 08:35:34 Received message from Master: op=PointingHead serial=59093 08:35:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:35:34 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:35:34 Point started: ret=0 08:35:34 point_skyscan result=0 08:35:35 Check angles 08:35:35 SkyScan query 08:35:36 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 08:35:36 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 08:35:36 Check angles [UTC 2018-12-11 08:35:36] 08:35:36 SkyScan query 08:35:36 SkyScan query done: ret=0 az=127.725<-8515 ze=38.505<-9433 Statuses=0009 0008 08:35:36 Msec=750 True Az=127.725 Ze=38.505 Az status=0009 Ze status=0008 08:35:37 Check angles 08:35:37 SkyScan query 08:35:37 SkyScan query done: ret=0 az=143.895<-9593 ze=38.505<-9433 Statuses=0009 0008 08:35:37 Msec=1500 True Az=143.895 Ze=38.505 Az status=0009 Ze status=0008 08:35:37 Check angles 08:35:37 SkyScan query 08:35:38 SkyScan query done: ret=0 az=161.19<-10746 ze=38.505<-9433 Statuses=0009 0008 08:35:38 Msec=2250 True Az=161.19 Ze=38.505 Az status=0009 Ze status=0008 08:35:38 Check angles 08:35:38 SkyScan query 08:35:39 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 08:35:39 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 08:35:39 Check angles 08:35:39 SkyScan query 08:35:39 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:35:39 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:35:39 Message to Master queued w/err=0: serial=59093 error=0 08:35:44 Received message from Master: op=Filter serial=59094 08:35:44 Color wheel filter change from 0 to 0 08:35:44 FLIGetFilterPos err=0 currentPosition=0 08:35:44 FLIGetStepsRemaining err=0 RemainingSteps=0 08:35:44 Filter is already there-color wheel unchanged 08:35:45 Received message from Master: op=Shutter serial=59095 08:35:45 Shutter LASER close 08:35:45 Received message from Camera: op=State serial=59097 08:35:45 GetSingleValue result=40 Value=cccccccc 08:35:45 SkyScan query 08:35:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:35:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:45 Parameters OK 08:35:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:45 Set A/D data flow result=40 08:35:45 Set A/D channel type result=40 08:35:45 Set A/D encoding result=40 08:35:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:45 Set channel filter=0.000000e+000 result=40 08:35:45 Config A/D Result=40 08:35:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:45 Get A/D filter: -9.255963e+061 result=40 08:35:45 Get A/D value=-858993460 result=40 08:35:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:45 Parameters OK 08:35:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:45 Set A/D data flow result=40 08:35:45 Set A/D channel type result=40 08:35:45 Set A/D encoding result=40 08:35:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:45 Set channel filter=0.000000e+000 result=40 08:35:45 Config A/D Result=40 08:35:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:45 Get A/D filter: -9.255963e+061 result=40 08:35:45 Get A/D value=-858993460 result=40 08:35:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:35:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:35:45 Aux= 08:35:45 Message to Camera, serial 59097 queued [UTC 2018-12-11 08:35:54] 08:36:22 Received message from Master: op=PointingHead serial=59110 08:36:22 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:36:22 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:36:22 Point started: ret=0 08:36:22 point_skyscan result=0 08:36:23 Check angles 08:36:23 SkyScan query 08:36:24 SkyScan query done: ret=0 az=152.985<-10199 ze=8.685<-11421 Statuses=0009 0009 08:36:24 Msec=0 True Az=152.985 Ze=8.685 Az status=0009 Ze status=0009 08:36:24 Check angles 08:36:24 SkyScan query 08:36:24 SkyScan query done: ret=0 az=135.465<-9031 ze=-12.27<-12818 Statuses=0009 0009 08:36:24 Msec=750 True Az=135.465 Ze=-12.27 Az status=0009 Ze status=0009 08:36:25 Check angles 08:36:25 SkyScan query 08:36:25 SkyScan query done: ret=0 az=117.99<-7866 ze=-33.21<-14214 Statuses=0009 0009 08:36:25 Msec=1500 True Az=117.99 Ze=-33.21 Az status=0009 Ze status=0009 08:36:25 Check angles 08:36:25 SkyScan query 08:36:26 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.525<-15435 Statuses=0009 0009 08:36:26 Msec=2250 True Az=100.41 Ze=-51.525 Az status=0009 Ze status=0009 08:36:26 Check angles 08:36:26 SkyScan query 08:36:27 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 08:36:27 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 08:36:27 Check angles 08:36:27 SkyScan query 08:36:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:36:27 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:36:27 Message to Master queued w/err=0: serial=59110 error=0 08:36:32 Received message from Master: op=Filter serial=59111 08:36:32 Color wheel filter change from 0 to 0 08:36:32 FLIGetFilterPos err=0 currentPosition=0 08:36:32 FLIGetStepsRemaining err=0 RemainingSteps=0 08:36:32 Filter is already there-color wheel unchanged 08:36:33 Received message from Master: op=Shutter serial=59112 08:36:33 Shutter LASER close 08:36:33 Received message from Camera: op=State serial=59114 08:36:33 GetSingleValue result=40 Value=cccccccc 08:36:33 SkyScan query 08:36:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:36:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:33 Parameters OK 08:36:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:33 Set A/D data flow result=40 08:36:33 Set A/D channel type result=40 08:36:33 Set A/D encoding result=40 08:36:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:33 Set channel filter=0.000000e+000 result=40 08:36:33 Config A/D Result=40 08:36:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:33 Get A/D filter: -9.255963e+061 result=40 08:36:33 Get A/D value=-858993460 result=40 08:36:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:33 Parameters OK 08:36:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:33 Set A/D data flow result=40 08:36:33 Set A/D channel type result=40 08:36:33 Set A/D encoding result=40 08:36:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:33 Set channel filter=0.000000e+000 result=40 08:36:33 Config A/D Result=40 08:36:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:33 Get A/D filter: -9.255963e+061 result=40 08:36:33 Get A/D value=-858993460 result=40 08:36:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:36:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:36:33 Aux= 08:36:33 Message to Camera, serial 59114 queued 08:37:10 Received message from Master: op=PointingHead serial=59127 08:37:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:37:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:37:10 Point started: ret=0 08:37:10 point_skyscan result=0 08:37:11 Check angles 08:37:11 SkyScan query 08:37:12 SkyScan query done: ret=0 az=109.245<-7283 ze=-81.69<-17446 Statuses=0009 0009 08:37:12 Msec=0 True Az=109.245 Ze=-81.69 Az status=0009 Ze status=0009 08:37:12 Check angles 08:37:12 SkyScan query 08:37:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.645<-18843 Statuses=0008 0009 08:37:13 Msec=750 True Az=112.995 Ze=-102.645 Az status=0008 Ze status=0009 08:37:13 Check angles 08:37:13 SkyScan query 08:37:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.02<-20268 Statuses=0008 0009 08:37:13 Msec=1500 True Az=112.995 Ze=-124.02 Az status=0008 Ze status=0009 08:37:14 Check angles 08:37:14 SkyScan query 08:37:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.96<-21664 Statuses=0008 0009 08:37:14 Msec=2250 True Az=112.995 Ze=-144.96 Az status=0008 Ze status=0009 08:37:14 Check angles 08:37:14 SkyScan query 08:37:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.9<-23060 Statuses=0008 0009 08:37:15 Msec=3000 True Az=112.995 Ze=-165.9 Az status=0008 Ze status=0009 08:37:15 Check angles 08:37:15 SkyScan query 08:37:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:37:16 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:37:16 Message to Master queued w/err=0: serial=59127 error=0 08:37:21 Received message from Master: op=Filter serial=59128 08:37:21 Color wheel filter change from 0 to 0 08:37:21 FLIGetFilterPos err=0 currentPosition=0 08:37:21 FLIGetStepsRemaining err=0 RemainingSteps=0 08:37:21 Filter is already there-color wheel unchanged 08:37:21 Received message from Master: op=Shutter serial=59129 08:37:21 Shutter LASER open 08:37:21 Received message from Camera: op=State serial=59131 08:37:21 GetSingleValue result=40 Value=cccccccc 08:37:21 SkyScan query 08:37:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:37:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:22 Parameters OK 08:37:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:22 Set A/D data flow result=40 08:37:22 Set A/D channel type result=40 08:37:22 Set A/D encoding result=40 08:37:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:22 Set channel filter=0.000000e+000 result=40 08:37:22 Config A/D Result=40 08:37:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:22 Get A/D filter: -9.255963e+061 result=40 08:37:22 Get A/D value=-858993460 result=40 08:37:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:22 Parameters OK 08:37:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:22 Set A/D data flow result=40 08:37:22 Set A/D channel type result=40 08:37:22 Set A/D encoding result=40 08:37:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:22 Set channel filter=0.000000e+000 result=40 08:37:22 Config A/D Result=40 08:37:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:22 Get A/D filter: -9.255963e+061 result=40 08:37:22 Get A/D value=-858993460 result=40 08:37:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:37:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:37:22 Aux= 08:37:22 Message to Camera, serial 59131 queued 08:37:30 Received message from Master: op=Shutter serial=59141 08:37:30 Shutter LASER close 08:37:30 Received message from Master: op=PointingHead serial=59145 08:37:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:37:30 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:37:31 Point started: ret=0 08:37:31 point_skyscan result=0 08:37:31 Check angles 08:37:31 SkyScan query 08:37:32 SkyScan query done: ret=0 az=90.105<-6007 ze=157.485<-1501 Statuses=0009 0009 08:37:32 Msec=0 True Az=90.105 Ze=157.485 Az status=0009 Ze status=0009 08:37:32 Check angles 08:37:32 SkyScan query 08:37:33 SkyScan query done: ret=0 az=72.645<-4843 ze=136.515<-2899 Statuses=0009 0009 08:37:33 Msec=750 True Az=72.645 Ze=136.515 Az status=0009 Ze status=0009 08:37:33 Check angles 08:37:33 SkyScan query 08:37:34 SkyScan query done: ret=0 az=55.2<-3680 ze=115.605<-4293 Statuses=0009 0009 08:37:34 Msec=1500 True Az=55.2 Ze=115.605 Az status=0009 Ze status=0009 08:37:34 Check angles 08:37:34 SkyScan query 08:37:34 SkyScan query done: ret=0 az=40.875<-2725 ze=94.62<-5692 Statuses=0009 0009 08:37:34 Msec=2250 True Az=40.875 Ze=94.62 Az status=0009 Ze status=0009 08:37:34 Check angles 08:37:34 SkyScan query 08:37:35 SkyScan query done: ret=0 az=40.995<-2733 ze=73.695<-7087 Statuses=0008 0009 08:37:35 Msec=3000 True Az=40.995 Ze=73.695 Az status=0008 Ze status=0009 08:37:35 Check angles 08:37:35 SkyScan query 08:37:36 SkyScan query done: ret=0 az=40.995<-2733 ze=53.01<-8466 Statuses=0008 0009 08:37:36 Msec=3750 True Az=40.995 Ze=53.01 Az status=0008 Ze status=0009 08:37:36 Check angles 08:37:36 SkyScan query 08:37:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:37:37 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:37:37 Message to Master queued w/err=0: serial=59145 error=0 08:37:42 Received message from Master: op=Filter serial=59146 08:37:42 Color wheel filter change from 0 to 0 08:37:42 FLIGetFilterPos err=0 currentPosition=0 08:37:42 FLIGetStepsRemaining err=0 RemainingSteps=0 08:37:42 Filter is already there-color wheel unchanged 08:37:42 Received message from Master: op=Shutter serial=59147 08:37:42 Shutter LASER close 08:37:42 Received message from Camera: op=State serial=59149 08:37:42 GetSingleValue result=40 Value=cccccccc 08:37:42 SkyScan query 08:37:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:37:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:42 Parameters OK 08:37:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:42 Set A/D data flow result=40 08:37:42 Set A/D channel type result=40 08:37:42 Set A/D encoding result=40 08:37:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:42 Set channel filter=0.000000e+000 result=40 08:37:42 Config A/D Result=40 08:37:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:42 Get A/D filter: -9.255963e+061 result=40 08:37:42 Get A/D value=-858993460 result=40 08:37:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:42 Parameters OK 08:37:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:42 Set A/D data flow result=40 08:37:42 Set A/D channel type result=40 08:37:42 Set A/D encoding result=40 08:37:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:42 Set channel filter=0.000000e+000 result=40 08:37:42 Config A/D Result=40 08:37:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:42 Get A/D filter: -9.255963e+061 result=40 08:37:42 Get A/D value=-858993460 result=40 08:37:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:37:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:37:42 Aux= 08:37:42 Message to Camera, serial 59149 queued 08:38:19 Received message from Master: op=PointingHead serial=59162 08:38:19 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:38:19 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:38:20 Point started: ret=0 08:38:20 point_skyscan result=0 08:38:20 Check angles 08:38:20 SkyScan query 08:38:21 SkyScan query done: ret=0 az=63.795<-4253 ze=66.555<-7563 Statuses=0009 0008 08:38:21 Msec=0 True Az=63.795 Ze=66.555 Az status=0009 Ze status=0008 08:38:21 Check angles 08:38:21 SkyScan query 08:38:22 SkyScan query done: ret=0 az=81.18<-5412 ze=66.51<-7566 Statuses=0009 0008 08:38:22 Msec=750 True Az=81.18 Ze=66.51 Az status=0009 Ze status=0008 08:38:22 Check angles 08:38:22 SkyScan query 08:38:23 SkyScan query done: ret=0 az=98.7<-6580 ze=66.495<-7567 Statuses=0009 0008 08:38:23 Msec=1500 True Az=98.7 Ze=66.495 Az status=0009 Ze status=0008 08:38:23 Check angles 08:38:23 SkyScan query 08:38:23 SkyScan query done: ret=0 az=116.31<-7754 ze=66.495<-7567 Statuses=0009 0008 08:38:23 Msec=2250 True Az=116.31 Ze=66.495 Az status=0009 Ze status=0008 08:38:23 Check angles 08:38:23 SkyScan query 08:38:24 SkyScan query done: ret=0 az=133.845<-8923 ze=66.495<-7567 Statuses=0009 0008 08:38:24 Msec=3000 True Az=133.845 Ze=66.495 Az status=0009 Ze status=0008 08:38:24 Check angles 08:38:24 SkyScan query 08:38:25 SkyScan query done: ret=0 az=151.23<-10082 ze=66.495<-7567 Statuses=0009 0008 08:38:25 Msec=3750 True Az=151.23 Ze=66.495 Az status=0009 Ze status=0008 08:38:25 Check angles 08:38:25 SkyScan query 08:38:26 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:38:26 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 08:38:26 Message to Master queued w/err=0: serial=59162 error=0 08:38:31 Received message from Master: op=Filter serial=59163 08:38:31 Color wheel filter change from 0 to 0 08:38:31 FLIGetFilterPos err=0 currentPosition=0 08:38:31 FLIGetStepsRemaining err=0 RemainingSteps=0 08:38:31 Filter is already there-color wheel unchanged 08:38:31 Received message from Master: op=Shutter serial=59164 08:38:31 Shutter LASER close 08:38:31 Received message from Camera: op=State serial=59166 08:38:31 GetSingleValue result=40 Value=cccccccc 08:38:31 SkyScan query 08:38:31 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:38:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:31 Parameters OK 08:38:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:31 Set A/D data flow result=40 08:38:31 Set A/D channel type result=40 08:38:31 Set A/D encoding result=40 08:38:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:31 Set channel filter=0.000000e+000 result=40 08:38:31 Config A/D Result=40 08:38:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:31 Get A/D filter: -9.255963e+061 result=40 08:38:31 Get A/D value=-858993460 result=40 08:38:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:31 Parameters OK 08:38:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:31 Set A/D data flow result=40 08:38:31 Set A/D channel type result=40 08:38:31 Set A/D encoding result=40 08:38:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:31 Set channel filter=0.000000e+000 result=40 08:38:31 Config A/D Result=40 08:38:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:31 Get A/D filter: -9.255963e+061 result=40 08:38:31 Get A/D value=-858993460 result=40 08:38:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:31 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:38:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:38:31 Aux= 08:38:31 Message to Camera, serial 59166 queued 08:39:08 Received message from Master: op=PointingHead serial=59179 08:39:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:39:08 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:39:08 Point started: ret=0 08:39:08 point_skyscan result=0 08:39:09 Check angles 08:39:09 SkyScan query 08:39:10 SkyScan query done: ret=0 az=134.55<-8970 ze=36.27<-9582 Statuses=0009 0009 08:39:10 Msec=0 True Az=134.55 Ze=36.27 Az status=0009 Ze status=0009 08:39:10 Check angles 08:39:10 SkyScan query 08:39:11 SkyScan query done: ret=0 az=116.64<-7776 ze=14.865<-11009 Statuses=0009 0009 08:39:11 Msec=750 True Az=116.64 Ze=14.865 Az status=0009 Ze status=0009 08:39:11 Check angles 08:39:11 SkyScan query 08:39:11 SkyScan query done: ret=0 az=99.345<-6623 ze=-6.09<-12406 Statuses=0009 0009 08:39:11 Msec=1500 True Az=99.345 Ze=-6.09 Az status=0009 Ze status=0009 08:39:12 Check angles 08:39:12 SkyScan query 08:39:12 SkyScan query done: ret=0 az=81.51<-5434 ze=-27.525<-13835 Statuses=0009 0009 08:39:12 Msec=2250 True Az=81.51 Ze=-27.525 Az status=0009 Ze status=0009 08:39:12 Check angles 08:39:12 SkyScan query 08:39:13 SkyScan query done: ret=0 az=63.705<-4247 ze=-38.565<-14571 Statuses=0009 0008 08:39:13 Msec=3000 True Az=63.705 Ze=-38.565 Az status=0009 Ze status=0008 08:39:13 Check angles 08:39:13 SkyScan query 08:39:14 SkyScan query done: ret=0 az=45.84<-3056 ze=-38.52<-14568 Statuses=0009 0008 08:39:14 Msec=3750 True Az=45.84 Ze=-38.52 Az status=0009 Ze status=0008 08:39:14 Check angles 08:39:14 SkyScan query 08:39:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:39:14 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:39:14 Message to Master queued w/err=0: serial=59179 error=0 08:39:19 Received message from Master: op=Filter serial=59180 08:39:19 Color wheel filter change from 0 to 0 08:39:19 FLIGetFilterPos err=0 currentPosition=0 08:39:19 FLIGetStepsRemaining err=0 RemainingSteps=0 08:39:19 Filter is already there-color wheel unchanged 08:39:20 Received message from Master: op=Shutter serial=59181 08:39:20 Shutter LASER close 08:39:20 Received message from Camera: op=State serial=59183 08:39:20 GetSingleValue result=40 Value=cccccccc 08:39:20 SkyScan query 08:39:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:39:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:20 Parameters OK 08:39:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:20 Set A/D data flow result=40 08:39:20 Set A/D channel type result=40 08:39:20 Set A/D encoding result=40 08:39:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:20 Set channel filter=0.000000e+000 result=40 08:39:20 Config A/D Result=40 08:39:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:20 Get A/D filter: -9.255963e+061 result=40 08:39:20 Get A/D value=-858993460 result=40 08:39:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:20 Parameters OK 08:39:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:20 Set A/D data flow result=40 08:39:20 Set A/D channel type result=40 08:39:20 Set A/D encoding result=40 08:39:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:20 Set channel filter=0.000000e+000 result=40 08:39:20 Config A/D Result=40 08:39:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:20 Get A/D filter: -9.255963e+061 result=40 08:39:20 Get A/D value=-858993460 result=40 08:39:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:39:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:39:20 Aux= 08:39:20 Message to Camera, serial 59183 queued 08:39:57 Received message from Master: op=PointingHead serial=59196 08:39:57 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:39:57 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:39:57 Point started: ret=0 08:39:57 point_skyscan result=0 08:39:58 Check angles 08:39:58 SkyScan query 08:39:59 SkyScan query done: ret=0 az=64.605<-4307 ze=-68.82<-16588 Statuses=0009 0009 08:39:59 Msec=0 True Az=64.605 Ze=-68.82 Az status=0009 Ze status=0009 08:39:59 Check angles 08:39:59 SkyScan query 08:39:59 SkyScan query done: ret=0 az=81.99<-5466 ze=-89.805<-17987 Statuses=0009 0009 08:39:59 Msec=750 True Az=81.99 Ze=-89.805 Az status=0009 Ze status=0009 08:40:00 Check angles 08:40:00 SkyScan query 08:40:00 SkyScan query done: ret=0 az=100.08<-6672 ze=-111.18<-19412 Statuses=0009 0009 08:40:00 Msec=1500 True Az=100.08 Ze=-111.18 Az status=0009 Ze status=0009 08:40:00 Check angles 08:40:00 SkyScan query 08:40:01 SkyScan query done: ret=0 az=117.495<-7833 ze=-132.12<-20808 Statuses=0009 0009 08:40:01 Msec=2250 True Az=117.495 Ze=-132.12 Az status=0009 Ze status=0009 08:40:01 Check angles 08:40:01 SkyScan query 08:40:02 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 08:40:02 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 08:40:02 Check angles 08:40:02 SkyScan query 08:40:02 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:40:02 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:40:02 Message to Master queued w/err=0: serial=59196 error=0 08:40:07 Received message from Master: op=Filter serial=59197 08:40:07 Color wheel filter change from 0 to 0 08:40:07 FLIGetFilterPos err=0 currentPosition=0 08:40:07 FLIGetStepsRemaining err=0 RemainingSteps=0 08:40:07 Filter is already there-color wheel unchanged 08:40:08 Received message from Master: op=Shutter serial=59198 08:40:08 Shutter LASER close 08:40:08 Received message from Camera: op=State serial=59200 08:40:08 GetSingleValue result=40 Value=cccccccc 08:40:08 SkyScan query 08:40:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:40:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:08 Parameters OK 08:40:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:08 Set A/D data flow result=40 08:40:08 Set A/D channel type result=40 08:40:08 Set A/D encoding result=40 08:40:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:08 Set channel filter=0.000000e+000 result=40 08:40:08 Config A/D Result=40 08:40:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:08 Get A/D filter: -9.255963e+061 result=40 08:40:08 Get A/D value=-858993460 result=40 08:40:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:08 Parameters OK 08:40:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:08 Set A/D data flow result=40 08:40:08 Set A/D channel type result=40 08:40:08 Set A/D encoding result=40 08:40:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:08 Set channel filter=0.000000e+000 result=40 08:40:08 Config A/D Result=40 08:40:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:08 Get A/D filter: -9.255963e+061 result=40 08:40:08 Get A/D value=-858993460 result=40 08:40:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:08 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:40:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:40:08 Aux= 08:40:08 Message to Camera, serial 59200 queued 08:40:44 Received message from Master: op=PointingHead serial=59212 08:40:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:40:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:40:44 Point started: ret=0 08:40:44 point_skyscan result=0 08:40:45 Check angles 08:40:45 SkyScan query 08:40:46 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.285<-23419 Statuses=0009 0009 08:40:46 Msec=0 True Az=113.01 Ze=-171.285 Az status=0009 Ze status=0009 08:40:46 Check angles 08:40:46 SkyScan query 08:40:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:40:47 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:40:47 Message to Master queued w/err=0: serial=59212 error=0 08:40:52 Received message from Master: op=Filter serial=59213 08:40:52 Color wheel filter change from 0 to 0 08:40:52 FLIGetFilterPos err=0 currentPosition=0 08:40:52 FLIGetStepsRemaining err=0 RemainingSteps=0 08:40:52 Filter is already there-color wheel unchanged 08:40:52 Received message from Master: op=Shutter serial=59214 08:40:52 Shutter LASER open 08:40:52 Received message from Camera: op=State serial=59216 08:40:52 GetSingleValue result=40 Value=cccccccc 08:40:52 SkyScan query 08:40:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:40:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:53 Parameters OK 08:40:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:53 Set A/D data flow result=40 08:40:53 Set A/D channel type result=40 08:40:53 Set A/D encoding result=40 08:40:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:53 Set channel filter=0.000000e+000 result=40 08:40:53 Config A/D Result=40 08:40:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:53 Get A/D filter: -9.255963e+061 result=40 08:40:53 Get A/D value=-858993460 result=40 08:40:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:53 Parameters OK 08:40:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:53 Set A/D data flow result=40 08:40:53 Set A/D channel type result=40 08:40:53 Set A/D encoding result=40 08:40:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:53 Set channel filter=0.000000e+000 result=40 08:40:53 Config A/D Result=40 08:40:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:53 Get A/D filter: -9.255963e+061 result=40 08:40:53 Get A/D value=-858993460 result=40 08:40:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:40:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:40:53 Aux= 08:40:53 Message to Camera, serial 59216 queued 08:41:01 Received message from Master: op=Shutter serial=59226 08:41:01 Shutter LASER close 08:41:02 Received message from Master: op=PointingHead serial=59230 08:41:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:41:02 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:41:02 Point started: ret=0 08:41:02 point_skyscan result=0 08:41:03 Check angles 08:41:03 SkyScan query 08:41:03 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.295<-21553 Statuses=0009 0009 08:41:03 Msec=0 True Az=135.825 Ze=-143.295 Az status=0009 Ze status=0009 08:41:03 Check angles 08:41:03 SkyScan query 08:41:04 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.325<-20155 Statuses=0009 0009 08:41:04 Msec=750 True Az=153.36 Ze=-122.325 Az status=0009 Ze status=0009 08:41:04 Check angles 08:41:04 SkyScan query 08:41:05 SkyScan query done: ret=0 az=170.82<-11388 ze=-101.445<-18763 Statuses=0009 0009 08:41:05 Msec=1500 True Az=170.82 Ze=-101.445 Az status=0009 Ze status=0009 08:41:05 Check angles 08:41:05 SkyScan query 08:41:05 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.025<-17335 Statuses=0008 0009 08:41:05 Msec=2250 True Az=176.025 Ze=-80.025 Az status=0008 Ze status=0009 08:41:06 Check angles 08:41:06 SkyScan query 08:41:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.055<-15937 Statuses=0008 0009 08:41:06 Msec=3000 True Az=175.995 Ze=-59.055 Az status=0008 Ze status=0009 08:41:06 Check angles 08:41:06 SkyScan query 08:41:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:41:07 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:41:07 Message to Master queued w/err=0: serial=59230 error=0 08:41:12 Received message from Master: op=Filter serial=59231 08:41:12 Color wheel filter change from 0 to 0 08:41:12 FLIGetFilterPos err=0 currentPosition=0 08:41:12 FLIGetStepsRemaining err=0 RemainingSteps=0 08:41:12 Filter is already there-color wheel unchanged 08:41:12 Received message from Master: op=Shutter serial=59232 08:41:12 Shutter LASER close 08:41:12 Received message from Camera: op=State serial=59234 08:41:12 GetSingleValue result=40 Value=cccccccc 08:41:12 SkyScan query 08:41:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:41:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:13 Parameters OK 08:41:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:13 Set A/D data flow result=40 08:41:13 Set A/D channel type result=40 08:41:13 Set A/D encoding result=40 08:41:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:13 Set channel filter=0.000000e+000 result=40 08:41:13 Config A/D Result=40 08:41:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:13 Get A/D filter: -9.255963e+061 result=40 08:41:13 Get A/D value=-858993460 result=40 08:41:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:13 Parameters OK 08:41:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:13 Set A/D data flow result=40 08:41:13 Set A/D channel type result=40 08:41:13 Set A/D encoding result=40 08:41:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:13 Set channel filter=0.000000e+000 result=40 08:41:13 Config A/D Result=40 08:41:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:13 Get A/D filter: -9.255963e+061 result=40 08:41:13 Get A/D value=-858993460 result=40 08:41:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:41:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:41:13 Aux= 08:41:13 Message to Camera, serial 59234 queued 08:41:50 Received message from Master: op=PointingHead serial=59247 08:41:50 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:41:50 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:41:50 Point started: ret=0 08:41:50 point_skyscan result=0 08:41:51 Check angles 08:41:51 SkyScan query 08:41:51 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.72<-13448 Statuses=0009 0009 08:41:51 Msec=0 True Az=152.925 Ze=-21.72 Az status=0009 Ze status=0009 08:41:52 Check angles 08:41:52 SkyScan query 08:41:52 SkyScan query done: ret=0 az=135.48<-9032 ze=-0.72<-12048 Statuses=0009 0009 08:41:52 Msec=750 True Az=135.48 Ze=-0.72 Az status=0009 Ze status=0009 08:41:52 Check angles 08:41:52 SkyScan query 08:41:53 SkyScan query done: ret=0 az=117.93<-7862 ze=20.19<-10654 Statuses=0009 0009 08:41:53 Msec=1500 True Az=117.93 Ze=20.19 Az status=0009 Ze status=0009 08:41:53 Check angles 08:41:53 SkyScan query 08:41:54 SkyScan query done: ret=0 az=100.41<-6694 ze=41.205<-9253 Statuses=0009 0009 08:41:54 Msec=2250 True Az=100.41 Ze=41.205 Az status=0009 Ze status=0009 08:41:54 Check angles 08:41:54 SkyScan query 08:41:54 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 08:41:54 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 08:41:55 Check angles 08:41:55 SkyScan query 08:41:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:41:55 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:41:55 Message to Master queued w/err=0: serial=59247 error=0 08:42:00 Received message from Master: op=Filter serial=59248 08:42:00 Color wheel filter change from 0 to 0 08:42:00 FLIGetFilterPos err=0 currentPosition=0 08:42:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:00 Filter is already there-color wheel unchanged 08:42:00 Received message from Master: op=Shutter serial=59249 08:42:00 Shutter LASER close 08:42:00 Received message from Camera: op=State serial=59251 08:42:00 GetSingleValue result=40 Value=cccccccc 08:42:00 SkyScan query 08:42:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:42:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:01 Parameters OK 08:42:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:01 Set A/D data flow result=40 08:42:01 Set A/D channel type result=40 08:42:01 Set A/D encoding result=40 08:42:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:01 Set channel filter=0.000000e+000 result=40 08:42:01 Config A/D Result=40 08:42:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:01 Get A/D filter: -9.255963e+061 result=40 08:42:01 Get A/D value=-858993460 result=40 08:42:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:01 Parameters OK 08:42:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:01 Set A/D data flow result=40 08:42:01 Set A/D channel type result=40 08:42:01 Set A/D encoding result=40 08:42:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:01 Set channel filter=0.000000e+000 result=40 08:42:01 Config A/D Result=40 08:42:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:01 Get A/D filter: -9.255963e+061 result=40 08:42:01 Get A/D value=-858993460 result=40 08:42:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:01 Aux= 08:42:01 Message to Camera, serial 59251 queued 08:42:38 Received message from Master: op=PointingHead serial=59264 08:42:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:42:38 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:42:38 Point started: ret=0 08:42:38 point_skyscan result=0 08:42:39 Check angles 08:42:39 SkyScan query 08:42:40 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 08:42:40 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 08:42:40 Check angles 08:42:40 SkyScan query 08:42:40 SkyScan query done: ret=0 az=126.81<-8454 ze=38.505<-9433 Statuses=0009 0008 08:42:40 Msec=750 True Az=126.81 Ze=38.505 Az status=0009 Ze status=0008 08:42:40 Check angles 08:42:40 SkyScan query 08:42:41 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 08:42:41 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 08:42:41 Check angles 08:42:41 SkyScan query 08:42:42 SkyScan query done: ret=0 az=162.09<-10806 ze=38.505<-9433 Statuses=0009 0008 08:42:42 Msec=2250 True Az=162.09 Ze=38.505 Az status=0009 Ze status=0008 08:42:42 Check angles 08:42:42 SkyScan query 08:42:43 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:42:43 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:42:43 Check angles 08:42:43 SkyScan query 08:42:43 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:42:43 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:42:43 Message to Master queued w/err=0: serial=59264 error=0 08:42:48 Received message from Master: op=Filter serial=59265 08:42:48 Color wheel filter change from 0 to 0 08:42:48 FLIGetFilterPos err=0 currentPosition=0 08:42:48 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:48 Filter is already there-color wheel unchanged 08:42:48 Received message from Master: op=Shutter serial=59266 08:42:48 Shutter LASER close 08:42:48 Received message from Camera: op=State serial=59268 08:42:48 GetSingleValue result=40 Value=cccccccc 08:42:48 SkyScan query 08:42:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:42:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:49 Parameters OK 08:42:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:49 Set A/D data flow result=40 08:42:49 Set A/D channel type result=40 08:42:49 Set A/D encoding result=40 08:42:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:49 Set channel filter=0.000000e+000 result=40 08:42:49 Config A/D Result=40 08:42:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:49 Get A/D filter: -9.255963e+061 result=40 08:42:49 Get A/D value=-858993460 result=40 08:42:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:49 Parameters OK 08:42:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:49 Set A/D data flow result=40 08:42:49 Set A/D channel type result=40 08:42:49 Set A/D encoding result=40 08:42:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:49 Set channel filter=0.000000e+000 result=40 08:42:49 Config A/D Result=40 08:42:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:49 Get A/D filter: -9.255963e+061 result=40 08:42:49 Get A/D value=-858993460 result=40 08:42:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:49 Aux= 08:42:49 Message to Camera, serial 59268 queued 08:43:26 Received message from Master: op=PointingHead serial=59281 08:43:26 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:43:26 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:43:26 Point started: ret=0 08:43:26 point_skyscan result=0 08:43:27 Check angles 08:43:27 SkyScan query 08:43:28 SkyScan query done: ret=0 az=152.73<-10182 ze=8.475<-11435 Statuses=0009 0009 08:43:28 Msec=0 True Az=152.73 Ze=8.475 Az status=0009 Ze status=0009 08:43:28 Check angles 08:43:28 SkyScan query 08:43:28 SkyScan query done: ret=0 az=134.82<-8988 ze=-12.915<-12861 Statuses=0009 0009 08:43:28 Msec=750 True Az=134.82 Ze=-12.915 Az status=0009 Ze status=0009 08:43:29 Check angles 08:43:29 SkyScan query 08:43:29 SkyScan query done: ret=0 az=117.255<-7817 ze=-33.87<-14258 Statuses=0009 0009 08:43:29 Msec=1500 True Az=117.255 Ze=-33.87 Az status=0009 Ze status=0009 08:43:29 Check angles 08:43:29 SkyScan query 08:43:30 SkyScan query done: ret=0 az=99.975<-6665 ze=-51.57<-15438 Statuses=0009 0009 08:43:30 Msec=2250 True Az=99.975 Ze=-51.57 Az status=0009 Ze status=0009 08:43:30 Check angles 08:43:30 SkyScan query 08:43:31 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 08:43:31 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 08:43:31 Check angles 08:43:31 SkyScan query 08:43:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:43:31 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:43:31 Message to Master queued w/err=0: serial=59281 error=0 08:43:36 Received message from Master: op=Filter serial=59282 08:43:36 Color wheel filter change from 0 to 0 08:43:36 FLIGetFilterPos err=0 currentPosition=0 08:43:36 FLIGetStepsRemaining err=0 RemainingSteps=0 08:43:36 Filter is already there-color wheel unchanged 08:43:37 Received message from Master: op=Shutter serial=59283 08:43:37 Shutter LASER close 08:43:37 Received message from Camera: op=State serial=59285 08:43:37 GetSingleValue result=40 Value=cccccccc 08:43:37 SkyScan query 08:43:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:43:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:37 Parameters OK 08:43:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:37 Set A/D data flow result=40 08:43:37 Set A/D channel type result=40 08:43:37 Set A/D encoding result=40 08:43:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:37 Set channel filter=0.000000e+000 result=40 08:43:37 Config A/D Result=40 08:43:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:37 Get A/D filter: -9.255963e+061 result=40 08:43:37 Get A/D value=-858993460 result=40 08:43:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:37 Parameters OK 08:43:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:37 Set A/D data flow result=40 08:43:37 Set A/D channel type result=40 08:43:37 Set A/D encoding result=40 08:43:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:37 Set channel filter=0.000000e+000 result=40 08:43:37 Config A/D Result=40 08:43:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:37 Get A/D filter: -9.255963e+061 result=40 08:43:37 Get A/D value=-858993460 result=40 08:43:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:43:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:43:37 Aux= 08:43:37 Message to Camera, serial 59285 queued 08:44:14 Received message from Master: op=PointingHead serial=59298 08:44:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:44:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:44:14 Point started: ret=0 08:44:14 point_skyscan result=0 08:44:15 Check angles 08:44:15 SkyScan query 08:44:16 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.435<-17429 Statuses=0009 0009 08:44:16 Msec=0 True Az=109.17 Ze=-81.435 Az status=0009 Ze status=0009 08:44:16 Check angles 08:44:16 SkyScan query 08:44:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.825<-18855 Statuses=0008 0009 08:44:16 Msec=750 True Az=112.995 Ze=-102.825 Az status=0008 Ze status=0009 08:44:17 Check angles 08:44:17 SkyScan query 08:44:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.795<-20253 Statuses=0008 0009 08:44:17 Msec=1500 True Az=112.995 Ze=-123.795 Az status=0008 Ze status=0009 08:44:17 Check angles 08:44:17 SkyScan query 08:44:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.735<-21649 Statuses=0008 0009 08:44:18 Msec=2250 True Az=112.995 Ze=-144.735 Az status=0008 Ze status=0009 08:44:18 Check angles 08:44:18 SkyScan query 08:44:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.125<-23075 Statuses=0008 0009 08:44:19 Msec=3000 True Az=112.995 Ze=-166.125 Az status=0008 Ze status=0009 08:44:19 Check angles 08:44:19 SkyScan query 08:44:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:44:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:44:19 Message to Master queued w/err=0: serial=59298 error=0 08:44:24 Received message from Master: op=Filter serial=59299 08:44:24 Color wheel filter change from 0 to 0 08:44:24 FLIGetFilterPos err=0 currentPosition=0 08:44:24 FLIGetStepsRemaining err=0 RemainingSteps=0 08:44:24 Filter is already there-color wheel unchanged 08:44:25 Received message from Master: op=Shutter serial=59300 08:44:25 Shutter LASER open 08:44:25 Received message from Camera: op=State serial=59302 08:44:25 GetSingleValue result=40 Value=cccccccc 08:44:25 SkyScan query 08:44:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:44:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:25 Parameters OK 08:44:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:25 Set A/D data flow result=40 08:44:25 Set A/D channel type result=40 08:44:25 Set A/D encoding result=40 08:44:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:25 Set channel filter=0.000000e+000 result=40 08:44:25 Config A/D Result=40 08:44:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:25 Get A/D filter: -9.255963e+061 result=40 08:44:25 Get A/D value=-858993460 result=40 08:44:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:25 Parameters OK 08:44:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:25 Set A/D data flow result=40 08:44:25 Set A/D channel type result=40 08:44:25 Set A/D encoding result=40 08:44:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:25 Set channel filter=0.000000e+000 result=40 08:44:25 Config A/D Result=40 08:44:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:25 Get A/D filter: -9.255963e+061 result=40 08:44:25 Get A/D value=-858993460 result=40 08:44:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:44:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:44:25 Aux= 08:44:25 Message to Camera, serial 59302 queued 08:44:34 Received message from Master: op=Shutter serial=59312 08:44:34 Shutter LASER close 08:44:34 Received message from Master: op=PointingHead serial=59316 08:44:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:44:34 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:44:35 Point started: ret=0 08:44:35 point_skyscan result=0 08:44:35 Check angles 08:44:35 SkyScan query 08:44:36 SkyScan query done: ret=0 az=89.85<-5990 ze=157.11<-1526 Statuses=0009 0009 08:44:36 Msec=0 True Az=89.85 Ze=157.11 Az status=0009 Ze status=0009 08:44:36 Check angles 08:44:36 SkyScan query 08:44:37 SkyScan query done: ret=0 az=71.925<-4795 ze=135.705<-2953 Statuses=0009 0009 08:44:37 Msec=750 True Az=71.925 Ze=135.705 Az status=0009 Ze status=0009 08:44:37 Check angles 08:44:37 SkyScan query 08:44:38 SkyScan query done: ret=0 az=54.72<-3648 ze=114.735<-4351 Statuses=0009 0009 08:44:38 Msec=1500 True Az=54.72 Ze=114.735 Az status=0009 Ze status=0009 08:44:38 Check angles 08:44:38 SkyScan query 08:44:38 SkyScan query done: ret=0 az=40.905<-2727 ze=93.81<-5746 Statuses=0009 0009 08:44:38 Msec=2250 True Az=40.905 Ze=93.81 Az status=0009 Ze status=0009 08:44:39 Check angles 08:44:39 SkyScan query 08:44:39 SkyScan query done: ret=0 az=40.995<-2733 ze=72.81<-7146 Statuses=0008 0009 08:44:39 Msec=3000 True Az=40.995 Ze=72.81 Az status=0008 Ze status=0009 08:44:39 Check angles 08:44:39 SkyScan query 08:44:40 SkyScan query done: ret=0 az=40.995<-2733 ze=52.485<-8501 Statuses=0008 0009 08:44:40 Msec=3750 True Az=40.995 Ze=52.485 Az status=0008 Ze status=0009 08:44:40 Check angles 08:44:40 SkyScan query 08:44:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:44:41 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:44:41 Message to Master queued w/err=0: serial=59316 error=0 08:44:46 Received message from Master: op=Filter serial=59317 08:44:46 Color wheel filter change from 0 to 0 08:44:46 FLIGetFilterPos err=0 currentPosition=0 08:44:46 FLIGetStepsRemaining err=0 RemainingSteps=0 08:44:46 Filter is already there-color wheel unchanged 08:44:46 Received message from Master: op=Shutter serial=59318 08:44:46 Shutter LASER close 08:44:46 Received message from Camera: op=State serial=59320 08:44:46 GetSingleValue result=40 Value=cccccccc 08:44:46 SkyScan query 08:44:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:44:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:47 Parameters OK 08:44:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:47 Set A/D data flow result=40 08:44:47 Set A/D channel type result=40 08:44:47 Set A/D encoding result=40 08:44:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:47 Set channel filter=0.000000e+000 result=40 08:44:47 Config A/D Result=40 08:44:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:47 Get A/D filter: -9.255963e+061 result=40 08:44:47 Get A/D value=-858993460 result=40 08:44:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:47 Parameters OK 08:44:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:47 Set A/D data flow result=40 08:44:47 Set A/D channel type result=40 08:44:47 Set A/D encoding result=40 08:44:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:47 Set channel filter=0.000000e+000 result=40 08:44:47 Config A/D Result=40 08:44:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:47 Get A/D filter: -9.255963e+061 result=40 08:44:47 Get A/D value=-858993460 result=40 08:44:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:44:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:44:47 Aux= 08:44:47 Message to Camera, serial 59320 queued 08:45:23 Received message from Master: op=PointingHead serial=59333 08:45:23 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:45:23 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:45:24 Point started: ret=0 08:45:24 point_skyscan result=0 08:45:24 Check angles 08:45:24 SkyScan query 08:45:25 SkyScan query done: ret=0 az=64.02<-4268 ze=66.555<-7563 Statuses=0009 0008 08:45:25 Msec=0 True Az=64.02 Ze=66.555 Az status=0009 Ze status=0008 08:45:25 Check angles 08:45:25 SkyScan query 08:45:26 SkyScan query done: ret=0 az=81.345<-5423 ze=66.495<-7567 Statuses=0009 0008 08:45:26 Msec=750 True Az=81.345 Ze=66.495 Az status=0009 Ze status=0008 08:45:26 Check angles 08:45:26 SkyScan query 08:45:27 SkyScan query done: ret=0 az=98.955<-6597 ze=66.495<-7567 Statuses=0009 0008 08:45:27 Msec=1500 True Az=98.955 Ze=66.495 Az status=0009 Ze status=0008 08:45:27 Check angles 08:45:27 SkyScan query 08:45:27 SkyScan query done: ret=0 az=116.505<-7767 ze=66.495<-7567 Statuses=0009 0008 08:45:27 Msec=2250 True Az=116.505 Ze=66.495 Az status=0009 Ze status=0008 08:45:27 Check angles 08:45:27 SkyScan query 08:45:28 SkyScan query done: ret=0 az=134.025<-8935 ze=66.495<-7567 Statuses=0009 0008 08:45:28 Msec=3000 True Az=134.025 Ze=66.495 Az status=0009 Ze status=0008 08:45:28 Check angles 08:45:28 SkyScan query 08:45:29 SkyScan query done: ret=0 az=151.425<-10095 ze=66.495<-7567 Statuses=0009 0008 08:45:29 Msec=3750 True Az=151.425 Ze=66.495 Az status=0009 Ze status=0008 08:45:29 Received message from Master: op=Identify serial=59334 08:45:29 Check angles 08:45:29 SkyScan query 08:45:30 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:45:30 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 08:45:30 Message to Master queued w/err=0: serial=59333 error=0 08:45:35 Received message from Master: op=Filter serial=59337 08:45:35 Color wheel filter change from 0 to 0 08:45:35 FLIGetFilterPos err=0 currentPosition=0 08:45:35 FLIGetStepsRemaining err=0 RemainingSteps=0 08:45:35 Filter is already there-color wheel unchanged 08:45:35 Received message from Master: op=Shutter serial=59338 08:45:35 Shutter LASER close 08:45:35 Received message from Camera: op=State serial=59340 08:45:35 GetSingleValue result=40 Value=cccccccc 08:45:35 SkyScan query 08:45:35 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:45:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:35 Parameters OK 08:45:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:35 Set A/D data flow result=40 08:45:35 Set A/D channel type result=40 08:45:35 Set A/D encoding result=40 08:45:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:35 Set channel filter=0.000000e+000 result=40 08:45:35 Config A/D Result=40 08:45:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:35 Get A/D filter: -9.255963e+061 result=40 08:45:35 Get A/D value=-858993460 result=40 08:45:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:35 Parameters OK 08:45:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:35 Set A/D data flow result=40 08:45:35 Set A/D channel type result=40 08:45:35 Set A/D encoding result=40 08:45:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:35 Set channel filter=0.000000e+000 result=40 08:45:35 Config A/D Result=40 08:45:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:35 Get A/D filter: -9.255963e+061 result=40 [UTC 2018-12-11 08:45:35] 08:45:35 Get A/D value=-858993460 result=40 08:45:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:35 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:45:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:45:35 Aux= 08:45:35 Message to Camera, serial 59340 queued 08:46:12 Received message from Master: op=PointingHead serial=59353 08:46:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:46:12 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:46:13 Point started: ret=0 08:46:13 point_skyscan result=0 08:46:13 Check angles 08:46:13 SkyScan query 08:46:14 SkyScan query done: ret=0 az=134.805<-8987 ze=36.63<-9558 Statuses=0009 0009 08:46:14 Msec=0 True Az=134.805 Ze=36.63 Az status=0009 Ze status=0009 08:46:14 Check angles 08:46:14 SkyScan query 08:46:15 SkyScan query done: ret=0 az=117.465<-7831 ze=15.69<-10954 Statuses=0009 0009 08:46:15 Msec=750 True Az=117.465 Ze=15.69 Az status=0009 Ze status=0009 08:46:15 Check angles 08:46:15 SkyScan query 08:46:15 SkyScan query done: ret=0 az=100.065<-6671 ze=-5.28<-12352 Statuses=0009 0009 08:46:15 Msec=1500 True Az=100.065 Ze=-5.28 Az status=0009 Ze status=0009 08:46:16 Check angles 08:46:16 SkyScan query 08:46:16 SkyScan query done: ret=0 az=82.56<-5504 ze=-26.235<-13749 Statuses=0009 0009 08:46:16 Msec=2250 True Az=82.56 Ze=-26.235 Az status=0009 Ze status=0009 08:46:16 Check angles 08:46:16 SkyScan query 08:46:17 SkyScan query done: ret=0 az=64.68<-4312 ze=-38.565<-14571 Statuses=0009 0008 08:46:17 Msec=3000 True Az=64.68 Ze=-38.565 Az status=0009 Ze status=0008 08:46:17 Check angles 08:46:17 SkyScan query 08:46:18 SkyScan query done: ret=0 az=47.295<-3153 ze=-38.535<-14569 Statuses=0009 0008 08:46:18 Msec=3750 True Az=47.295 Ze=-38.535 Az status=0009 Ze status=0008 08:46:18 Check angles 08:46:18 SkyScan query 08:46:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:46:18 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:46:18 Message to Master queued w/err=0: serial=59353 error=0 08:46:23 Received message from Master: op=Filter serial=59354 08:46:23 Color wheel filter change from 0 to 0 08:46:23 FLIGetFilterPos err=0 currentPosition=0 08:46:23 FLIGetStepsRemaining err=0 RemainingSteps=0 08:46:23 Filter is already there-color wheel unchanged 08:46:24 Received message from Master: op=Shutter serial=59355 08:46:24 Shutter LASER close 08:46:24 Received message from Camera: op=State serial=59357 08:46:24 GetSingleValue result=40 Value=cccccccc 08:46:24 SkyScan query 08:46:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:46:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:24 Parameters OK 08:46:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:24 Set A/D data flow result=40 08:46:24 Set A/D channel type result=40 08:46:24 Set A/D encoding result=40 08:46:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:24 Set channel filter=0.000000e+000 result=40 08:46:24 Config A/D Result=40 08:46:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:24 Get A/D filter: -9.255963e+061 result=40 08:46:24 Get A/D value=-858993460 result=40 08:46:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:24 Parameters OK 08:46:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:24 Set A/D data flow result=40 08:46:24 Set A/D channel type result=40 08:46:24 Set A/D encoding result=40 08:46:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:24 Set channel filter=0.000000e+000 result=40 08:46:24 Config A/D Result=40 08:46:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:24 Get A/D filter: -9.255963e+061 result=40 08:46:24 Get A/D value=-858993460 result=40 08:46:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:46:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:46:24 Aux= 08:46:24 Message to Camera, serial 59357 queued 08:47:01 Received message from Master: op=PointingHead serial=59370 08:47:01 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:47:01 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:47:01 Point started: ret=0 08:47:01 point_skyscan result=0 08:47:02 Check angles 08:47:02 SkyScan query 08:47:03 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.37<-16558 Statuses=0009 0009 08:47:03 Msec=0 True Az=64.215 Ze=-68.37 Az status=0009 Ze status=0009 08:47:03 Check angles 08:47:03 SkyScan query 08:47:03 SkyScan query done: ret=0 az=81.495<-5433 ze=-89.385<-17959 Statuses=0009 0009 08:47:03 Msec=750 True Az=81.495 Ze=-89.385 Az status=0009 Ze status=0009 08:47:04 Check angles 08:47:04 SkyScan query 08:47:04 SkyScan query done: ret=0 az=99.135<-6609 ze=-110.34<-19356 Statuses=0009 0009 08:47:04 Msec=1500 True Az=99.135 Ze=-110.34 Az status=0009 Ze status=0009 08:47:04 Check angles 08:47:04 SkyScan query 08:47:05 SkyScan query done: ret=0 az=116.7<-7780 ze=-131.265<-20751 Statuses=0009 0009 08:47:05 Msec=2250 True Az=116.7 Ze=-131.265 Az status=0009 Ze status=0009 08:47:05 Check angles 08:47:05 SkyScan query 08:47:06 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.555<-21437 Statuses=0009 0008 08:47:06 Msec=3000 True Az=131.175 Ze=-141.555 Az status=0009 Ze status=0008 08:47:06 Check angles 08:47:06 SkyScan query 08:47:06 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 08:47:06 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 08:47:06 Message to Master queued w/err=0: serial=59370 error=0 08:47:11 Received message from Master: op=Filter serial=59371 08:47:11 Color wheel filter change from 0 to 0 08:47:11 FLIGetFilterPos err=0 currentPosition=0 08:47:11 FLIGetStepsRemaining err=0 RemainingSteps=0 08:47:11 Filter is already there-color wheel unchanged 08:47:12 Received message from Master: op=Shutter serial=59372 08:47:12 Shutter LASER close 08:47:12 Received message from Camera: op=State serial=59374 08:47:12 GetSingleValue result=40 Value=cccccccc 08:47:12 SkyScan query 08:47:12 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:47:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:12 Parameters OK 08:47:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:12 Set A/D data flow result=40 08:47:12 Set A/D channel type result=40 08:47:12 Set A/D encoding result=40 08:47:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:12 Set channel filter=0.000000e+000 result=40 08:47:12 Config A/D Result=40 08:47:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:12 Get A/D filter: -9.255963e+061 result=40 08:47:12 Get A/D value=-858993460 result=40 08:47:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:12 Parameters OK 08:47:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:12 Set A/D data flow result=40 08:47:12 Set A/D channel type result=40 08:47:12 Set A/D encoding result=40 08:47:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:12 Set channel filter=0.000000e+000 result=40 08:47:12 Config A/D Result=40 08:47:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:12 Get A/D filter: -9.255963e+061 result=40 08:47:12 Get A/D value=-858993460 result=40 08:47:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:12 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:47:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:47:12 Aux= 08:47:12 Message to Camera, serial 59374 queued 08:47:49 Received message from Master: op=PointingHead serial=59387 08:47:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:47:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:47:49 Point started: ret=0 08:47:49 point_skyscan result=0 08:47:50 Check angles 08:47:50 SkyScan query 08:47:51 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 08:47:51 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 08:47:51 Check angles 08:47:51 SkyScan query 08:47:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:47:51 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:47:51 Message to Master queued w/err=0: serial=59387 error=0 08:47:56 Received message from Master: op=Filter serial=59388 08:47:56 Color wheel filter change from 0 to 0 08:47:56 FLIGetFilterPos err=0 currentPosition=0 08:47:56 FLIGetStepsRemaining err=0 RemainingSteps=0 08:47:56 Filter is already there-color wheel unchanged 08:47:57 Received message from Master: op=Shutter serial=59389 08:47:57 Shutter LASER open 08:47:57 Received message from Camera: op=State serial=59391 08:47:57 GetSingleValue result=40 Value=cccccccc 08:47:57 SkyScan query 08:47:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:47:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:57 Parameters OK 08:47:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:57 Set A/D data flow result=40 08:47:57 Set A/D channel type result=40 08:47:57 Set A/D encoding result=40 08:47:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:57 Set channel filter=0.000000e+000 result=40 08:47:57 Config A/D Result=40 08:47:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:57 Get A/D filter: -9.255963e+061 result=40 08:47:57 Get A/D value=-858993460 result=40 08:47:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:57 Parameters OK 08:47:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:57 Set A/D data flow result=40 08:47:57 Set A/D channel type result=40 08:47:57 Set A/D encoding result=40 08:47:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:57 Set channel filter=0.000000e+000 result=40 08:47:57 Config A/D Result=40 08:47:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:57 Get A/D filter: -9.255963e+061 result=40 08:47:57 Get A/D value=-858993460 result=40 08:47:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:47:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:47:57 Aux= 08:47:57 Message to Camera, serial 59391 queued 08:48:06 Received message from Master: op=Shutter serial=59401 08:48:06 Shutter LASER close 08:48:06 Received message from Master: op=PointingHead serial=59405 08:48:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:48:06 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:48:07 Point started: ret=0 08:48:07 point_skyscan result=0 08:48:08 Check angles 08:48:08 SkyScan query 08:48:08 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.13<-21542 Statuses=0009 0009 08:48:08 Msec=0 True Az=136.02 Ze=-143.13 Az status=0009 Ze status=0009 08:48:08 Check angles 08:48:08 SkyScan query 08:48:09 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.145<-20143 Statuses=0009 0009 08:48:09 Msec=750 True Az=153.585 Ze=-122.145 Az status=0009 Ze status=0009 08:48:09 Check angles 08:48:09 SkyScan query 08:48:10 SkyScan query done: ret=0 az=171.045<-11403 ze=-101.25<-18750 Statuses=0009 0009 08:48:10 Msec=1500 True Az=171.045 Ze=-101.25 Az status=0009 Ze status=0009 08:48:10 Check angles 08:48:10 SkyScan query 08:48:10 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.265<-17351 Statuses=0008 0009 08:48:10 Msec=2250 True Az=176.025 Ze=-80.265 Az status=0008 Ze status=0009 08:48:11 Check angles 08:48:11 SkyScan query 08:48:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.86<-15924 Statuses=0008 0009 08:48:11 Msec=3000 True Az=175.995 Ze=-58.86 Az status=0008 Ze status=0009 08:48:11 Check angles 08:48:11 SkyScan query 08:48:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:48:12 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:48:12 Message to Master queued w/err=0: serial=59405 error=0 08:48:17 Received message from Master: op=Filter serial=59406 08:48:17 Color wheel filter change from 0 to 0 08:48:17 FLIGetFilterPos err=0 currentPosition=0 08:48:17 FLIGetStepsRemaining err=0 RemainingSteps=0 08:48:17 Filter is already there-color wheel unchanged 08:48:17 Received message from Master: op=Shutter serial=59407 08:48:17 Shutter LASER close 08:48:17 Received message from Camera: op=State serial=59409 08:48:17 GetSingleValue result=40 Value=cccccccc 08:48:17 SkyScan query 08:48:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:48:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:18 Parameters OK 08:48:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:18 Set A/D data flow result=40 08:48:18 Set A/D channel type result=40 08:48:18 Set A/D encoding result=40 08:48:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:18 Set channel filter=0.000000e+000 result=40 08:48:18 Config A/D Result=40 08:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:18 Get A/D filter: -9.255963e+061 result=40 08:48:18 Get A/D value=-858993460 result=40 08:48:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:18 Parameters OK 08:48:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:18 Set A/D data flow result=40 08:48:18 Set A/D channel type result=40 08:48:18 Set A/D encoding result=40 08:48:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:18 Set channel filter=0.000000e+000 result=40 08:48:18 Config A/D Result=40 08:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:18 Get A/D filter: -9.255963e+061 result=40 08:48:18 Get A/D value=-858993460 result=40 08:48:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:48:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:48:18 Aux= 08:48:18 Message to Camera, serial 59409 queued 08:48:55 Received message from Master: op=PointingHead serial=59422 08:48:55 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:48:55 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:48:55 Point started: ret=0 08:48:55 point_skyscan result=0 08:48:56 Check angles 08:48:56 SkyScan query 08:48:56 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.705<-13447 Statuses=0009 0009 08:48:56 Msec=0 True Az=152.985 Ze=-21.705 Az status=0009 Ze status=0009 08:48:57 Check angles 08:48:57 SkyScan query 08:48:57 SkyScan query done: ret=0 az=135.195<-9013 ze=-0.3<-12020 Statuses=0009 0009 08:48:57 Msec=750 True Az=135.195 Ze=-0.3 Az status=0009 Ze status=0009 08:48:57 Check angles 08:48:57 SkyScan query 08:48:58 SkyScan query done: ret=0 az=117.525<-7835 ze=20.67<-10622 Statuses=0009 0009 08:48:58 Msec=1500 True Az=117.525 Ze=20.67 Az status=0009 Ze status=0009 08:48:58 Check angles 08:48:58 SkyScan query 08:48:59 SkyScan query done: ret=0 az=100.11<-6674 ze=41.61<-9226 Statuses=0009 0009 08:48:59 Msec=2250 True Az=100.11 Ze=41.61 Az status=0009 Ze status=0009 08:48:59 Check angles 08:48:59 SkyScan query 08:48:59 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 08:48:59 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 08:49:00 Check angles 08:49:00 SkyScan query 08:49:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:49:00 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:49:00 Message to Master queued w/err=0: serial=59422 error=0 08:49:05 Received message from Master: op=Filter serial=59423 08:49:05 Color wheel filter change from 0 to 0 08:49:05 FLIGetFilterPos err=0 currentPosition=0 08:49:05 FLIGetStepsRemaining err=0 RemainingSteps=0 08:49:05 Filter is already there-color wheel unchanged 08:49:05 Received message from Master: op=Shutter serial=59424 08:49:05 Shutter LASER close 08:49:05 Received message from Camera: op=State serial=59426 08:49:05 GetSingleValue result=40 Value=cccccccc 08:49:05 SkyScan query 08:49:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:49:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:06 Parameters OK 08:49:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:06 Set A/D data flow result=40 08:49:06 Set A/D channel type result=40 08:49:06 Set A/D encoding result=40 08:49:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:06 Set channel filter=0.000000e+000 result=40 08:49:06 Config A/D Result=40 08:49:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:06 Get A/D filter: -9.255963e+061 result=40 08:49:06 Get A/D value=-858993460 result=40 08:49:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:06 Parameters OK 08:49:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:06 Set A/D data flow result=40 08:49:06 Set A/D channel type result=40 08:49:06 Set A/D encoding result=40 08:49:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:06 Set channel filter=0.000000e+000 result=40 08:49:06 Config A/D Result=40 08:49:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:06 Get A/D filter: -9.255963e+061 result=40 08:49:06 Get A/D value=-858993460 result=40 08:49:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:49:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:49:06 Aux= 08:49:06 Message to Camera, serial 59426 queued 08:49:42 Received message from Master: op=PointingHead serial=59438 08:49:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:49:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:49:42 Point started: ret=0 08:49:42 point_skyscan result=0 08:49:43 Check angles 08:49:43 SkyScan query 08:49:44 SkyScan query done: ret=0 az=109.065<-7271 ze=38.49<-9434 Statuses=0009 0008 08:49:44 Msec=0 True Az=109.065 Ze=38.49 Az status=0009 Ze status=0008 08:49:44 Check angles 08:49:44 SkyScan query 08:49:44 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 08:49:44 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 08:49:44 Check angles 08:49:44 SkyScan query 08:49:45 SkyScan query done: ret=0 az=144.045<-9603 ze=38.505<-9433 Statuses=0009 0008 08:49:45 Msec=1500 True Az=144.045 Ze=38.505 Az status=0009 Ze status=0008 08:49:45 Check angles 08:49:45 SkyScan query 08:49:46 SkyScan query done: ret=0 az=161.43<-10762 ze=38.505<-9433 Statuses=0009 0008 08:49:46 Msec=2250 True Az=161.43 Ze=38.505 Az status=0009 Ze status=0008 08:49:46 Check angles 08:49:46 SkyScan query 08:49:47 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 08:49:47 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 08:49:47 Check angles 08:49:47 SkyScan query 08:49:47 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:49:47 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:49:47 Message to Master queued w/err=0: serial=59438 error=0 08:49:52 Received message from Master: op=Filter serial=59439 08:49:52 Color wheel filter change from 0 to 0 08:49:52 FLIGetFilterPos err=0 currentPosition=0 08:49:52 FLIGetStepsRemaining err=0 RemainingSteps=0 08:49:52 Filter is already there-color wheel unchanged 08:49:52 Received message from Master: op=Shutter serial=59440 08:49:52 Shutter LASER close 08:49:53 Received message from Camera: op=State serial=59442 08:49:53 GetSingleValue result=40 Value=cccccccc 08:49:53 SkyScan query 08:49:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:49:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:53 Parameters OK 08:49:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:53 Set A/D data flow result=40 08:49:53 Set A/D channel type result=40 08:49:53 Set A/D encoding result=40 08:49:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:53 Set channel filter=0.000000e+000 result=40 08:49:53 Config A/D Result=40 08:49:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:53 Get A/D filter: -9.255963e+061 result=40 08:49:53 Get A/D value=-858993460 result=40 08:49:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:53 Parameters OK 08:49:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:53 Set A/D data flow result=40 08:49:53 Set A/D channel type result=40 08:49:53 Set A/D encoding result=40 08:49:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:53 Set channel filter=0.000000e+000 result=40 08:49:53 Config A/D Result=40 08:49:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:53 Get A/D filter: -9.255963e+061 result=40 08:49:53 Get A/D value=-858993460 result=40 08:49:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:49:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:49:53 Aux= 08:49:53 Message to Camera, serial 59442 queued 08:50:30 Received message from Master: op=PointingHead serial=59455 08:50:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:50:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:50:30 Point started: ret=0 08:50:30 point_skyscan result=0 08:50:31 Check angles 08:50:31 SkyScan query 08:50:32 SkyScan query done: ret=0 az=153.12<-10208 ze=8.895<-11407 Statuses=0009 0009 08:50:32 Msec=0 True Az=153.12 Ze=8.895 Az status=0009 Ze status=0009 08:50:32 Check angles 08:50:32 SkyScan query 08:50:32 SkyScan query done: ret=0 az=135.72<-9048 ze=-12.075<-12805 Statuses=0009 0009 08:50:32 Msec=750 True Az=135.72 Ze=-12.075 Az status=0009 Ze status=0009 08:50:33 Check angles 08:50:33 SkyScan query 08:50:33 SkyScan query done: ret=0 az=117.735<-7849 ze=-33.405<-14227 Statuses=0009 0009 08:50:33 Msec=1500 True Az=117.735 Ze=-33.405 Az status=0009 Ze status=0009 08:50:33 Check angles 08:50:33 SkyScan query 08:50:34 SkyScan query done: ret=0 az=100.32<-6688 ze=-51.54<-15436 Statuses=0009 0009 08:50:34 Msec=2250 True Az=100.32 Ze=-51.54 Az status=0009 Ze status=0009 08:50:34 Check angles 08:50:34 SkyScan query 08:50:35 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 08:50:35 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 08:50:35 Check angles 08:50:35 SkyScan query 08:50:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:50:35 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:50:35 Message to Master queued w/err=0: serial=59455 error=0 08:50:40 Received message from Master: op=Filter serial=59456 08:50:40 Color wheel filter change from 0 to 0 08:50:40 FLIGetFilterPos err=0 currentPosition=0 08:50:40 FLIGetStepsRemaining err=0 RemainingSteps=0 08:50:40 Filter is already there-color wheel unchanged 08:50:41 Received message from Master: op=Shutter serial=59457 08:50:41 Shutter LASER close 08:50:41 Received message from Camera: op=State serial=59459 08:50:41 GetSingleValue result=40 Value=cccccccc 08:50:41 SkyScan query 08:50:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:50:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:41 Parameters OK 08:50:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:41 Set A/D data flow result=40 08:50:41 Set A/D channel type result=40 08:50:41 Set A/D encoding result=40 08:50:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:41 Set channel filter=0.000000e+000 result=40 08:50:41 Config A/D Result=40 08:50:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:41 Get A/D filter: -9.255963e+061 result=40 08:50:41 Get A/D value=-858993460 result=40 08:50:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:41 Parameters OK 08:50:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:41 Set A/D data flow result=40 08:50:41 Set A/D channel type result=40 08:50:41 Set A/D encoding result=40 08:50:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:41 Set channel filter=0.000000e+000 result=40 08:50:41 Config A/D Result=40 08:50:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:41 Get A/D filter: -9.255963e+061 result=40 08:50:41 Get A/D value=-858993460 result=40 08:50:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:50:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:50:41 Aux= 08:50:41 Message to Camera, serial 59459 queued 08:51:18 Received message from Master: op=PointingHead serial=59472 08:51:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:51:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:51:18 Point started: ret=0 08:51:18 point_skyscan result=0 08:51:19 Check angles 08:51:19 SkyScan query 08:51:20 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.465<-17431 Statuses=0009 0009 08:51:20 Msec=0 True Az=109.2 Ze=-81.465 Az status=0009 Ze status=0009 08:51:20 Check angles 08:51:20 SkyScan query 08:51:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.405<-18827 Statuses=0008 0009 08:51:20 Msec=750 True Az=112.995 Ze=-102.405 Az status=0008 Ze status=0009 08:51:21 Check angles 08:51:21 SkyScan query 08:51:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.375<-20225 Statuses=0008 0009 08:51:21 Msec=1500 True Az=112.995 Ze=-123.375 Az status=0008 Ze status=0009 08:51:21 Check angles 08:51:21 SkyScan query 08:51:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.33<-21622 Statuses=0008 0009 08:51:22 Msec=2250 True Az=112.995 Ze=-144.33 Az status=0008 Ze status=0009 08:51:22 Check angles 08:51:22 SkyScan query 08:51:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.285<-23019 Statuses=0008 0009 08:51:23 Msec=3000 True Az=112.995 Ze=-165.285 Az status=0008 Ze status=0009 08:51:23 Check angles 08:51:23 SkyScan query 08:51:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:51:23 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:51:23 Message to Master queued w/err=0: serial=59472 error=0 08:51:28 Received message from Master: op=Filter serial=59473 08:51:28 Color wheel filter change from 0 to 0 08:51:28 FLIGetFilterPos err=0 currentPosition=0 08:51:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:51:28 Filter is already there-color wheel unchanged 08:51:29 Received message from Master: op=Shutter serial=59474 08:51:29 Shutter LASER open 08:51:29 Received message from Camera: op=State serial=59476 08:51:29 GetSingleValue result=40 Value=cccccccc 08:51:29 SkyScan query 08:51:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:51:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:29 Parameters OK 08:51:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:29 Set A/D data flow result=40 08:51:29 Set A/D channel type result=40 08:51:29 Set A/D encoding result=40 08:51:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:29 Set channel filter=0.000000e+000 result=40 08:51:29 Config A/D Result=40 08:51:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:29 Get A/D filter: -9.255963e+061 result=40 08:51:29 Get A/D value=-858993460 result=40 08:51:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:29 Parameters OK 08:51:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:29 Set A/D data flow result=40 08:51:29 Set A/D channel type result=40 08:51:29 Set A/D encoding result=40 08:51:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:29 Set channel filter=0.000000e+000 result=40 08:51:29 Config A/D Result=40 08:51:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:29 Get A/D filter: -9.255963e+061 result=40 08:51:29 Get A/D value=-858993460 result=40 08:51:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:51:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:51:29 Aux= 08:51:29 Message to Camera, serial 59476 queued 08:51:38 Received message from Master: op=Shutter serial=59486 08:51:38 Shutter LASER close 08:51:38 Received message from Master: op=PointingHead serial=59490 08:51:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:51:38 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:51:39 Point started: ret=0 08:51:39 point_skyscan result=0 08:51:39 Check angles 08:51:39 SkyScan query 08:51:40 SkyScan query done: ret=0 az=89.58<-5972 ze=156.84<-1544 Statuses=0009 0009 08:51:40 Msec=0 True Az=89.58 Ze=156.84 Az status=0009 Ze status=0009 08:51:40 Check angles 08:51:40 SkyScan query 08:51:41 SkyScan query done: ret=0 az=71.88<-4792 ze=135.855<-2943 Statuses=0009 0009 08:51:41 Msec=750 True Az=71.88 Ze=135.855 Az status=0009 Ze status=0009 08:51:41 Check angles 08:51:41 SkyScan query 08:51:41 SkyScan query done: ret=0 az=54.72<-3648 ze=114.84<-4344 Statuses=0009 0009 08:51:41 Msec=1500 True Az=54.72 Ze=114.84 Az status=0009 Ze status=0009 08:51:42 Check angles 08:51:42 SkyScan query 08:51:42 SkyScan query done: ret=0 az=40.89<-2726 ze=93.975<-5735 Statuses=0009 0009 08:51:42 Msec=2250 True Az=40.89 Ze=93.975 Az status=0009 Ze status=0009 08:51:42 Check angles 08:51:42 SkyScan query 08:51:43 SkyScan query done: ret=0 az=40.995<-2733 ze=72.975<-7135 Statuses=0008 0009 08:51:43 Msec=3000 True Az=40.995 Ze=72.975 Az status=0008 Ze status=0009 08:51:43 Check angles 08:51:43 SkyScan query 08:51:44 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 08:51:44 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 08:51:44 Check angles 08:51:44 SkyScan query 08:51:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:51:44 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:51:44 Message to Master queued w/err=0: serial=59490 error=0 08:51:49 Received message from Master: op=Filter serial=59491 08:51:49 Color wheel filter change from 0 to 0 08:51:49 FLIGetFilterPos err=0 currentPosition=0 08:51:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:51:49 Filter is already there-color wheel unchanged 08:51:50 Received message from Master: op=Shutter serial=59492 08:51:50 Shutter LASER close 08:51:50 Received message from Camera: op=State serial=59494 08:51:50 GetSingleValue result=40 Value=cccccccc 08:51:50 SkyScan query 08:51:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:51:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:50 Parameters OK 08:51:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:50 Set A/D data flow result=40 08:51:50 Set A/D channel type result=40 08:51:50 Set A/D encoding result=40 08:51:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:50 Set channel filter=0.000000e+000 result=40 08:51:50 Config A/D Result=40 08:51:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:50 Get A/D filter: -9.255963e+061 result=40 08:51:50 Get A/D value=-858993460 result=40 08:51:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:50 Parameters OK 08:51:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:50 Set A/D data flow result=40 08:51:50 Set A/D channel type result=40 08:51:50 Set A/D encoding result=40 08:51:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:50 Set channel filter=0.000000e+000 result=40 08:51:50 Config A/D Result=40 08:51:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:50 Get A/D filter: -9.255963e+061 result=40 08:51:50 Get A/D value=-858993460 result=40 08:51:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:51:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:51:50 Aux= 08:51:50 Message to Camera, serial 59494 queued 08:52:27 Received message from Master: op=PointingHead serial=59507 08:52:27 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:52:27 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:52:27 Point started: ret=0 08:52:27 point_skyscan result=0 08:52:28 Check angles 08:52:28 SkyScan query 08:52:29 SkyScan query done: ret=0 az=64.11<-4274 ze=66.555<-7563 Statuses=0009 0008 08:52:29 Msec=0 True Az=64.11 Ze=66.555 Az status=0009 Ze status=0008 08:52:29 Check angles 08:52:29 SkyScan query 08:52:30 SkyScan query done: ret=0 az=81.765<-5451 ze=66.495<-7567 Statuses=0009 0008 08:52:30 Msec=750 True Az=81.765 Ze=66.495 Az status=0009 Ze status=0008 08:52:30 Check angles 08:52:30 SkyScan query 08:52:30 SkyScan query done: ret=0 az=99.45<-6630 ze=66.495<-7567 Statuses=0009 0008 08:52:30 Msec=1500 True Az=99.45 Ze=66.495 Az status=0009 Ze status=0008 08:52:31 Check angles 08:52:31 SkyScan query 08:52:31 SkyScan query done: ret=0 az=116.97<-7798 ze=66.495<-7567 Statuses=0009 0008 08:52:31 Msec=2250 True Az=116.97 Ze=66.495 Az status=0009 Ze status=0008 08:52:31 Check angles 08:52:31 SkyScan query 08:52:32 SkyScan query done: ret=0 az=134.67<-8978 ze=66.495<-7567 Statuses=0009 0008 08:52:32 Msec=3000 True Az=134.67 Ze=66.495 Az status=0009 Ze status=0008 08:52:32 Check angles 08:52:32 SkyScan query 08:52:33 SkyScan query done: ret=0 az=152.145<-10143 ze=66.495<-7567 Statuses=0009 0008 08:52:33 Msec=3750 True Az=152.145 Ze=66.495 Az status=0009 Ze status=0008 08:52:33 Check angles 08:52:33 SkyScan query 08:52:33 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:52:33 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 08:52:33 Message to Master queued w/err=0: serial=59507 error=0 08:52:38 Received message from Master: op=Filter serial=59508 08:52:38 Color wheel filter change from 0 to 0 08:52:38 FLIGetFilterPos err=0 currentPosition=0 08:52:38 FLIGetStepsRemaining err=0 RemainingSteps=0 08:52:38 Filter is already there-color wheel unchanged 08:52:39 Received message from Master: op=Shutter serial=59509 08:52:39 Shutter LASER close 08:52:39 Received message from Camera: op=State serial=59511 08:52:39 GetSingleValue result=40 Value=cccccccc 08:52:39 SkyScan query 08:52:39 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:52:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:39 Parameters OK 08:52:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:39 Set A/D data flow result=40 08:52:39 Set A/D channel type result=40 08:52:39 Set A/D encoding result=40 08:52:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:39 Set channel filter=0.000000e+000 result=40 08:52:39 Config A/D Result=40 08:52:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:39 Get A/D filter: -9.255963e+061 result=40 08:52:39 Get A/D value=-858993460 result=40 08:52:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:39 Parameters OK 08:52:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:39 Set A/D data flow result=40 08:52:39 Set A/D channel type result=40 08:52:39 Set A/D encoding result=40 08:52:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:39 Set channel filter=0.000000e+000 result=40 08:52:39 Config A/D Result=40 08:52:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:39 Get A/D filter: -9.255963e+061 result=40 08:52:39 Get A/D value=-858993460 result=40 08:52:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:39 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:52:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:52:39 Aux= 08:52:39 Message to Camera, serial 59511 queued 08:53:16 Received message from Master: op=PointingHead serial=59524 08:53:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:53:16 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:53:16 Point started: ret=0 08:53:16 point_skyscan result=0 08:53:17 Check angles 08:53:17 SkyScan query 08:53:18 SkyScan query done: ret=0 az=134.91<-8994 ze=36.75<-9550 Statuses=0009 0009 08:53:18 Msec=0 True Az=134.91 Ze=36.75 Az status=0009 Ze status=0009 08:53:18 Check angles 08:53:18 SkyScan query 08:53:18 SkyScan query done: ret=0 az=117.09<-7806 ze=15.42<-10972 Statuses=0009 0009 08:53:18 Msec=750 True Az=117.09 Ze=15.42 Az status=0009 Ze status=0009 08:53:19 Check angles 08:53:19 SkyScan query 08:53:19 SkyScan query done: ret=0 az=99.765<-6651 ze=-5.61<-12374 Statuses=0009 0009 08:53:19 Msec=1500 True Az=99.765 Ze=-5.61 Az status=0009 Ze status=0009 08:53:19 Check angles 08:53:19 SkyScan query 08:53:20 SkyScan query done: ret=0 az=82.23<-5482 ze=-26.535<-13769 Statuses=0009 0009 08:53:20 Msec=2250 True Az=82.23 Ze=-26.535 Az status=0009 Ze status=0009 08:53:20 Check angles 08:53:20 SkyScan query 08:53:21 SkyScan query done: ret=0 az=64.785<-4319 ze=-38.58<-14572 Statuses=0009 0008 08:53:21 Msec=3000 True Az=64.785 Ze=-38.58 Az status=0009 Ze status=0008 08:53:21 Check angles 08:53:21 SkyScan query 08:53:21 SkyScan query done: ret=0 az=47.34<-3156 ze=-38.52<-14568 Statuses=0009 0008 08:53:21 Msec=3750 True Az=47.34 Ze=-38.52 Az status=0009 Ze status=0008 08:53:22 Check angles 08:53:22 SkyScan query 08:53:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:53:22 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:53:22 Message to Master queued w/err=0: serial=59524 error=0 08:53:27 Received message from Master: op=Filter serial=59525 08:53:27 Color wheel filter change from 0 to 0 08:53:27 FLIGetFilterPos err=0 currentPosition=0 08:53:27 FLIGetStepsRemaining err=0 RemainingSteps=0 08:53:27 Filter is already there-color wheel unchanged 08:53:27 Received message from Master: op=Shutter serial=59526 08:53:27 Shutter LASER close 08:53:27 Received message from Camera: op=State serial=59528 08:53:27 GetSingleValue result=40 Value=cccccccc 08:53:27 SkyScan query 08:53:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:53:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:28 Parameters OK 08:53:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:28 Set A/D data flow result=40 08:53:28 Set A/D channel type result=40 08:53:28 Set A/D encoding result=40 08:53:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:28 Set channel filter=0.000000e+000 result=40 08:53:28 Config A/D Result=40 08:53:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:28 Get A/D filter: -9.255963e+061 result=40 08:53:28 Get A/D value=-858993460 result=40 08:53:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:28 Parameters OK 08:53:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:28 Set A/D data flow result=40 08:53:28 Set A/D channel type result=40 08:53:28 Set A/D encoding result=40 08:53:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:28 Set channel filter=0.000000e+000 result=40 08:53:28 Config A/D Result=40 08:53:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:28 Get A/D filter: -9.255963e+061 result=40 08:53:28 Get A/D value=-858993460 result=40 08:53:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:53:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:53:28 Aux= 08:53:28 Message to Camera, serial 59528 queued 08:54:05 Received message from Master: op=PointingHead serial=59541 08:54:05 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:54:05 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:54:05 Point started: ret=0 08:54:05 point_skyscan result=0 08:54:06 Check angles 08:54:06 SkyScan query 08:54:06 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.61<-16574 Statuses=0009 0009 08:54:06 Msec=0 True Az=64.215 Ze=-68.61 Az status=0009 Ze status=0009 08:54:07 Check angles 08:54:07 SkyScan query 08:54:07 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.61<-17974 Statuses=0009 0009 08:54:07 Msec=750 True Az=81.615 Ze=-89.61 Az status=0009 Ze status=0009 08:54:07 Check angles 08:54:07 SkyScan query 08:54:08 SkyScan query done: ret=0 az=99.21<-6614 ze=-110.535<-19369 Statuses=0009 0009 08:54:08 Msec=1500 True Az=99.21 Ze=-110.535 Az status=0009 Ze status=0009 08:54:08 Check angles 08:54:08 SkyScan query 08:54:09 SkyScan query done: ret=0 az=116.715<-7781 ze=-131.475<-20765 Statuses=0009 0009 08:54:09 Msec=2250 True Az=116.715 Ze=-131.475 Az status=0009 Ze status=0009 08:54:09 Check angles 08:54:09 SkyScan query 08:54:09 SkyScan query done: ret=0 az=131.19<-8746 ze=-141.555<-21437 Statuses=0009 0008 08:54:09 Msec=3000 True Az=131.19 Ze=-141.555 Az status=0009 Ze status=0008 08:54:10 Check angles 08:54:10 SkyScan query 08:54:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 08:54:10 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 08:54:10 Message to Master queued w/err=0: serial=59541 error=0 08:54:15 Received message from Master: op=Filter serial=59542 08:54:15 Color wheel filter change from 0 to 0 08:54:15 FLIGetFilterPos err=0 currentPosition=0 08:54:15 FLIGetStepsRemaining err=0 RemainingSteps=0 08:54:15 Filter is already there-color wheel unchanged 08:54:15 Received message from Master: op=Shutter serial=59543 08:54:15 Shutter LASER close 08:54:15 Received message from Camera: op=State serial=59545 08:54:15 GetSingleValue result=40 Value=cccccccc 08:54:15 SkyScan query 08:54:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:54:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:16 Parameters OK 08:54:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:16 Set A/D data flow result=40 08:54:16 Set A/D channel type result=40 08:54:16 Set A/D encoding result=40 08:54:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:16 Set channel filter=0.000000e+000 result=40 08:54:16 Config A/D Result=40 08:54:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:16 Get A/D filter: -9.255963e+061 result=40 08:54:16 Get A/D value=-858993460 result=40 08:54:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:16 Parameters OK 08:54:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:16 Set A/D data flow result=40 08:54:16 Set A/D channel type result=40 08:54:16 Set A/D encoding result=40 08:54:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:16 Set channel filter=0.000000e+000 result=40 08:54:16 Config A/D Result=40 08:54:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:16 Get A/D filter: -9.255963e+061 result=40 08:54:16 Get A/D value=-858993460 result=40 08:54:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:54:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:54:16 Aux= 08:54:16 Message to Camera, serial 59545 queued 08:54:52 Received message from Master: op=PointingHead serial=59557 08:54:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:54:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:54:52 Point started: ret=0 08:54:52 point_skyscan result=0 08:54:53 Check angles 08:54:53 SkyScan query 08:54:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 08:54:54 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 08:54:54 Check angles 08:54:54 SkyScan query 08:54:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:54:54 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:54:54 Message to Master queued w/err=0: serial=59557 error=0 08:54:59 Received message from Master: op=Filter serial=59558 08:54:59 Color wheel filter change from 0 to 0 08:54:59 FLIGetFilterPos err=0 currentPosition=0 08:54:59 FLIGetStepsRemaining err=0 RemainingSteps=0 08:54:59 Filter is already there-color wheel unchanged 08:55:00 Received message from Master: op=Shutter serial=59559 08:55:00 Shutter LASER open 08:55:00 Received message from Camera: op=State serial=59561 08:55:00 GetSingleValue result=40 Value=cccccccc 08:55:00 SkyScan query 08:55:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:55:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:00 Parameters OK 08:55:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:00 Set A/D data flow result=40 08:55:00 Set A/D channel type result=40 08:55:00 Set A/D encoding result=40 08:55:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:00 Set channel filter=0.000000e+000 result=40 08:55:00 Config A/D Result=40 08:55:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:00 Get A/D filter: -9.255963e+061 result=40 08:55:00 Get A/D value=-858993460 result=40 08:55:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:00 Parameters OK 08:55:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:00 Set A/D data flow result=40 08:55:00 Set A/D channel type result=40 08:55:00 Set A/D encoding result=40 08:55:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:00 Set channel filter=0.000000e+000 result=40 08:55:00 Config A/D Result=40 08:55:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:00 Get A/D filter: -9.255963e+061 result=40 08:55:00 Get A/D value=-858993460 result=40 08:55:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:55:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:55:00 Aux= 08:55:00 Message to Camera, serial 59561 queued 08:55:09 Received message from Master: op=Shutter serial=59571 08:55:09 Shutter LASER close 08:55:09 Received message from Master: op=PointingHead serial=59575 08:55:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:55:09 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:55:10 Point started: ret=0 08:55:10 point_skyscan result=0 08:55:10 Check angles 08:55:10 SkyScan query 08:55:11 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.55<-21570 Statuses=0009 0009 08:55:11 Msec=0 True Az=135.705 Ze=-143.55 Az status=0009 Ze status=0009 08:55:11 Check angles 08:55:11 SkyScan query 08:55:12 SkyScan query done: ret=0 az=153.555<-10237 ze=-122.13<-20142 Statuses=0009 0009 08:55:12 Msec=750 True Az=153.555 Ze=-122.13 Az status=0009 Ze status=0009 08:55:12 Check angles 08:55:12 SkyScan query 08:55:12 SkyScan query done: ret=0 az=171.42<-11428 ze=-100.71<-18714 Statuses=0009 0009 08:55:12 Msec=1500 True Az=171.42 Ze=-100.71 Az status=0009 Ze status=0009 08:55:13 Check angles 08:55:13 SkyScan query 08:55:13 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.815<-17321 Statuses=0008 0009 08:55:13 Msec=2250 True Az=176.025 Ze=-79.815 Az status=0008 Ze status=0009 08:55:13 Check angles 08:55:13 SkyScan query 08:55:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.35<-15890 Statuses=0008 0009 08:55:14 Msec=3000 True Az=176.01 Ze=-58.35 Az status=0008 Ze status=0009 08:55:14 Check angles 08:55:14 SkyScan query 08:55:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 08:55:15 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 08:55:15 Message to Master queued w/err=0: serial=59575 error=0 08:55:20 Received message from Master: op=Filter serial=59576 08:55:20 Color wheel filter change from 0 to 0 08:55:20 FLIGetFilterPos err=0 currentPosition=0 08:55:20 FLIGetStepsRemaining err=0 RemainingSteps=0 08:55:20 Filter is already there-color wheel unchanged 08:55:20 Received message from Master: op=Shutter serial=59577 08:55:20 Shutter LASER close 08:55:20 Received message from Camera: op=State serial=59579 08:55:20 GetSingleValue result=40 Value=cccccccc 08:55:20 SkyScan query 08:55:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:55:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:21 Parameters OK 08:55:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:21 Set A/D data flow result=40 08:55:21 Set A/D channel type result=40 08:55:21 Set A/D encoding result=40 08:55:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:21 Set channel filter=0.000000e+000 result=40 08:55:21 Config A/D Result=40 08:55:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:21 Get A/D filter: -9.255963e+061 result=40 08:55:21 Get A/D value=-858993460 result=40 08:55:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:21 Parameters OK 08:55:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:21 Set A/D data flow result=40 08:55:21 Set A/D channel type result=40 08:55:21 Set A/D encoding result=40 08:55:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:21 Set channel filter=0.000000e+000 result=40 08:55:21 Config A/D Result=40 08:55:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:21 Get A/D filter: -9.255963e+061 result=40 08:55:21 Get A/D value=-858993460 result=40 08:55:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:55:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:55:21 Aux= 08:55:21 Message to Camera, serial 59579 queued [UTC 2018-12-11 08:55:54] 08:55:57 Received message from Master: op=PointingHead serial=59592 08:55:57 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:55:57 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:55:58 Point started: ret=0 08:55:58 point_skyscan result=0 08:55:59 Check angles 08:55:59 SkyScan query 08:55:59 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.36<-13424 Statuses=0009 0009 08:55:59 Msec=0 True Az=152.775 Ze=-21.36 Az status=0009 Ze status=0009 08:55:59 Check angles 08:55:59 SkyScan query 08:56:00 SkyScan query done: ret=0 az=135.27<-9018 ze=-0.405<-12027 Statuses=0009 0009 08:56:00 Msec=750 True Az=135.27 Ze=-0.405 Az status=0009 Ze status=0009 08:56:00 Check angles 08:56:00 SkyScan query 08:56:01 SkyScan query done: ret=0 az=117.585<-7839 ze=20.535<-10631 Statuses=0009 0009 08:56:01 Msec=1500 True Az=117.585 Ze=20.535 Az status=0009 Ze status=0009 08:56:01 Check angles 08:56:01 SkyScan query 08:56:01 SkyScan query done: ret=0 az=100.185<-6679 ze=41.505<-9233 Statuses=0009 0009 08:56:01 Msec=2250 True Az=100.185 Ze=41.505 Az status=0009 Ze status=0009 08:56:02 Check angles 08:56:02 SkyScan query 08:56:02 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 08:56:02 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 08:56:02 Check angles 08:56:02 SkyScan query 08:56:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:56:03 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:56:03 Message to Master queued w/err=0: serial=59592 error=0 08:56:08 Received message from Master: op=Filter serial=59593 08:56:08 Color wheel filter change from 0 to 0 08:56:08 FLIGetFilterPos err=0 currentPosition=0 08:56:08 FLIGetStepsRemaining err=0 RemainingSteps=0 08:56:08 Filter is already there-color wheel unchanged 08:56:08 Received message from Master: op=Shutter serial=59594 08:56:08 Shutter LASER close 08:56:08 Received message from Camera: op=State serial=59596 08:56:08 GetSingleValue result=40 Value=cccccccc 08:56:08 SkyScan query 08:56:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:56:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:09 Parameters OK 08:56:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:09 Set A/D data flow result=40 08:56:09 Set A/D channel type result=40 08:56:09 Set A/D encoding result=40 08:56:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:09 Set channel filter=0.000000e+000 result=40 08:56:09 Config A/D Result=40 08:56:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:09 Get A/D filter: -9.255963e+061 result=40 08:56:09 Get A/D value=-858993460 result=40 08:56:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:09 Parameters OK 08:56:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:09 Set A/D data flow result=40 08:56:09 Set A/D channel type result=40 08:56:09 Set A/D encoding result=40 08:56:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:09 Set channel filter=0.000000e+000 result=40 08:56:09 Config A/D Result=40 08:56:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:09 Get A/D filter: -9.255963e+061 result=40 08:56:09 Get A/D value=-858993460 result=40 08:56:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:56:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:56:09 Aux= 08:56:09 Message to Camera, serial 59596 queued 08:56:46 Received message from Master: op=PointingHead serial=59609 08:56:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:56:46 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:56:46 Point started: ret=0 08:56:46 point_skyscan result=0 08:56:47 Check angles 08:56:47 SkyScan query 08:56:47 SkyScan query done: ret=0 az=109.41<-7294 ze=38.49<-9434 Statuses=0009 0008 08:56:47 Msec=0 True Az=109.41 Ze=38.49 Az status=0009 Ze status=0008 08:56:47 Check angles 08:56:47 SkyScan query 08:56:48 SkyScan query done: ret=0 az=127.245<-8483 ze=38.49<-9434 Statuses=0009 0008 08:56:48 Msec=750 True Az=127.245 Ze=38.49 Az status=0009 Ze status=0008 08:56:48 Check angles 08:56:48 SkyScan query 08:56:49 SkyScan query done: ret=0 az=144.675<-9645 ze=38.505<-9433 Statuses=0009 0008 08:56:49 Msec=1500 True Az=144.675 Ze=38.505 Az status=0009 Ze status=0008 08:56:49 Check angles 08:56:49 SkyScan query 08:56:50 SkyScan query done: ret=0 az=162.105<-10807 ze=38.505<-9433 Statuses=0009 0008 08:56:50 Msec=2250 True Az=162.105 Ze=38.505 Az status=0009 Ze status=0008 08:56:50 Check angles 08:56:50 SkyScan query 08:56:50 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:56:50 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:56:50 Check angles 08:56:50 SkyScan query 08:56:51 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:56:51 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:56:51 Message to Master queued w/err=0: serial=59609 error=0 08:56:56 Received message from Master: op=Filter serial=59610 08:56:56 Color wheel filter change from 0 to 0 08:56:56 FLIGetFilterPos err=0 currentPosition=0 08:56:56 FLIGetStepsRemaining err=0 RemainingSteps=0 08:56:56 Filter is already there-color wheel unchanged 08:56:56 Received message from Master: op=Shutter serial=59611 08:56:56 Shutter LASER close 08:56:56 Received message from Camera: op=State serial=59613 08:56:56 GetSingleValue result=40 Value=cccccccc 08:56:56 SkyScan query 08:56:57 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:56:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:57 Parameters OK 08:56:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:57 Set A/D data flow result=40 08:56:57 Set A/D channel type result=40 08:56:57 Set A/D encoding result=40 08:56:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:57 Set channel filter=0.000000e+000 result=40 08:56:57 Config A/D Result=40 08:56:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:57 Get A/D filter: -9.255963e+061 result=40 08:56:57 Get A/D value=-858993460 result=40 08:56:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:57 Parameters OK 08:56:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:57 Set A/D data flow result=40 08:56:57 Set A/D channel type result=40 08:56:57 Set A/D encoding result=40 08:56:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:57 Set channel filter=0.000000e+000 result=40 08:56:57 Config A/D Result=40 08:56:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:57 Get A/D filter: -9.255963e+061 result=40 08:56:57 Get A/D value=-858993460 result=40 08:56:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:56:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:56:57 Aux= 08:56:57 Message to Camera, serial 59613 queued 08:57:34 Received message from Master: op=PointingHead serial=59626 08:57:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:57:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:57:34 Point started: ret=0 08:57:34 point_skyscan result=0 08:57:35 Check angles 08:57:35 SkyScan query 08:57:35 SkyScan query done: ret=0 az=153.195<-10213 ze=8.925<-11405 Statuses=0009 0009 08:57:35 Msec=0 True Az=153.195 Ze=8.925 Az status=0009 Ze status=0009 08:57:35 Check angles 08:57:35 SkyScan query 08:57:36 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.435<-12829 Statuses=0009 0009 08:57:36 Msec=750 True Az=135.435 Ze=-12.435 Az status=0009 Ze status=0009 08:57:36 Check angles 08:57:36 SkyScan query 08:57:37 SkyScan query done: ret=0 az=117.375<-7825 ze=-33.87<-14258 Statuses=0009 0009 08:57:37 Msec=1500 True Az=117.375 Ze=-33.87 Az status=0009 Ze status=0009 08:57:37 Check angles 08:57:37 SkyScan query 08:57:38 SkyScan query done: ret=0 az=100.05<-6670 ze=-51.57<-15438 Statuses=0009 0009 08:57:38 Msec=2250 True Az=100.05 Ze=-51.57 Az status=0009 Ze status=0009 08:57:38 Check angles 08:57:38 SkyScan query 08:57:38 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 08:57:38 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 08:57:39 Check angles 08:57:39 SkyScan query 08:57:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:57:39 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:57:39 Message to Master queued w/err=0: serial=59626 error=0 08:57:44 Received message from Master: op=Filter serial=59627 08:57:44 Color wheel filter change from 0 to 0 08:57:44 FLIGetFilterPos err=0 currentPosition=0 08:57:44 FLIGetStepsRemaining err=0 RemainingSteps=0 08:57:44 Filter is already there-color wheel unchanged 08:57:44 Received message from Master: op=Shutter serial=59628 08:57:44 Shutter LASER close 08:57:44 Received message from Camera: op=State serial=59630 08:57:44 GetSingleValue result=40 Value=cccccccc 08:57:44 SkyScan query 08:57:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:57:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:45 Parameters OK 08:57:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:45 Set A/D data flow result=40 08:57:45 Set A/D channel type result=40 08:57:45 Set A/D encoding result=40 08:57:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:45 Set channel filter=0.000000e+000 result=40 08:57:45 Config A/D Result=40 08:57:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:45 Get A/D filter: -9.255963e+061 result=40 08:57:45 Get A/D value=-858993460 result=40 08:57:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:45 Parameters OK 08:57:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:45 Set A/D data flow result=40 08:57:45 Set A/D channel type result=40 08:57:45 Set A/D encoding result=40 08:57:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:45 Set channel filter=0.000000e+000 result=40 08:57:45 Config A/D Result=40 08:57:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:45 Get A/D filter: -9.255963e+061 result=40 08:57:45 Get A/D value=-858993460 result=40 08:57:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:57:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:57:45 Aux= 08:57:45 Message to Camera, serial 59630 queued 08:58:22 Received message from Master: op=PointingHead serial=59643 08:58:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:58:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:58:22 Point started: ret=0 08:58:22 point_skyscan result=0 08:58:23 Check angles 08:58:23 SkyScan query 08:58:23 SkyScan query done: ret=0 az=108.96<-7264 ze=-81.285<-17419 Statuses=0009 0009 08:58:23 Msec=0 True Az=108.96 Ze=-81.285 Az status=0009 Ze status=0009 08:58:24 Check angles 08:58:24 SkyScan query 08:58:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.18<-18812 Statuses=0008 0009 08:58:24 Msec=750 True Az=112.995 Ze=-102.18 Az status=0008 Ze status=0009 08:58:24 Check angles 08:58:24 SkyScan query 08:58:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.15<-20210 Statuses=0008 0009 08:58:25 Msec=1500 True Az=112.995 Ze=-123.15 Az status=0008 Ze status=0009 08:58:25 Check angles 08:58:25 SkyScan query 08:58:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.105<-21607 Statuses=0008 0009 08:58:26 Msec=2250 True Az=112.995 Ze=-144.105 Az status=0008 Ze status=0009 08:58:26 Check angles 08:58:26 SkyScan query 08:58:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.06<-23004 Statuses=0008 0009 08:58:26 Msec=3000 True Az=112.995 Ze=-165.06 Az status=0008 Ze status=0009 08:58:27 Check angles 08:58:27 SkyScan query 08:58:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 08:58:27 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 08:58:27 Message to Master queued w/err=0: serial=59643 error=0 08:58:32 Received message from Master: op=Filter serial=59644 08:58:32 Color wheel filter change from 0 to 0 08:58:32 FLIGetFilterPos err=0 currentPosition=0 08:58:32 FLIGetStepsRemaining err=0 RemainingSteps=0 08:58:32 Filter is already there-color wheel unchanged 08:58:32 Received message from Master: op=Shutter serial=59645 08:58:32 Shutter LASER open 08:58:32 Received message from Camera: op=State serial=59647 08:58:32 GetSingleValue result=40 Value=cccccccc 08:58:32 SkyScan query 08:58:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:58:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:33 Parameters OK 08:58:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:33 Set A/D data flow result=40 08:58:33 Set A/D channel type result=40 08:58:33 Set A/D encoding result=40 08:58:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:33 Set channel filter=0.000000e+000 result=40 08:58:33 Config A/D Result=40 08:58:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:33 Get A/D filter: -9.255963e+061 result=40 08:58:33 Get A/D value=-858993460 result=40 08:58:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:33 Parameters OK 08:58:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:33 Set A/D data flow result=40 08:58:33 Set A/D channel type result=40 08:58:33 Set A/D encoding result=40 08:58:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:33 Set channel filter=0.000000e+000 result=40 08:58:33 Config A/D Result=40 08:58:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:33 Get A/D filter: -9.255963e+061 result=40 08:58:33 Get A/D value=-858993460 result=40 08:58:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:58:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:58:33 Aux= 08:58:33 Message to Camera, serial 59647 queued 08:58:41 Received message from Master: op=Shutter serial=59657 08:58:42 Shutter LASER close 08:58:42 Received message from Master: op=PointingHead serial=59661 08:58:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:58:42 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:58:42 Point started: ret=0 08:58:42 point_skyscan result=0 08:58:43 Check angles 08:58:43 SkyScan query 08:58:44 SkyScan query done: ret=0 az=89.43<-5962 ze=156.765<-1549 Statuses=0009 0009 08:58:44 Msec=0 True Az=89.43 Ze=156.765 Az status=0009 Ze status=0009 08:58:44 Check angles 08:58:44 SkyScan query 08:58:44 SkyScan query done: ret=0 az=71.835<-4789 ze=135.795<-2947 Statuses=0009 0009 08:58:44 Msec=750 True Az=71.835 Ze=135.795 Az status=0009 Ze status=0009 08:58:45 Check angles 08:58:45 SkyScan query 08:58:45 SkyScan query done: ret=0 az=54.705<-3647 ze=114.84<-4344 Statuses=0009 0009 08:58:45 Msec=1500 True Az=54.705 Ze=114.84 Az status=0009 Ze status=0009 08:58:45 Check angles 08:58:45 SkyScan query 08:58:46 SkyScan query done: ret=0 az=40.905<-2727 ze=93.9<-5740 Statuses=0009 0009 08:58:46 Msec=2250 True Az=40.905 Ze=93.9 Az status=0009 Ze status=0009 08:58:46 Check angles 08:58:46 SkyScan query 08:58:47 SkyScan query done: ret=0 az=40.995<-2733 ze=72.93<-7138 Statuses=0008 0009 08:58:47 Msec=3000 True Az=40.995 Ze=72.93 Az status=0008 Ze status=0009 08:58:47 Check angles 08:58:47 SkyScan query 08:58:47 SkyScan query done: ret=0 az=40.995<-2733 ze=52.275<-8515 Statuses=0008 0009 08:58:47 Msec=3750 True Az=40.995 Ze=52.275 Az status=0008 Ze status=0009 08:58:48 Check angles 08:58:48 SkyScan query 08:58:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:58:48 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:58:48 Message to Master queued w/err=0: serial=59661 error=0 08:58:53 Received message from Master: op=Filter serial=59662 08:58:53 Color wheel filter change from 0 to 0 08:58:53 FLIGetFilterPos err=0 currentPosition=0 08:58:53 FLIGetStepsRemaining err=0 RemainingSteps=0 08:58:53 Filter is already there-color wheel unchanged 08:58:53 Received message from Master: op=Shutter serial=59663 08:58:53 Shutter LASER close 08:58:54 Received message from Camera: op=State serial=59665 08:58:54 GetSingleValue result=40 Value=cccccccc 08:58:54 SkyScan query 08:58:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:58:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:54 Parameters OK 08:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:54 Set A/D data flow result=40 08:58:54 Set A/D channel type result=40 08:58:54 Set A/D encoding result=40 08:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:54 Set channel filter=0.000000e+000 result=40 08:58:54 Config A/D Result=40 08:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:54 Get A/D filter: -9.255963e+061 result=40 08:58:54 Get A/D value=-858993460 result=40 08:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:54 Parameters OK 08:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:54 Set A/D data flow result=40 08:58:54 Set A/D channel type result=40 08:58:54 Set A/D encoding result=40 08:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:54 Set channel filter=0.000000e+000 result=40 08:58:54 Config A/D Result=40 08:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:54 Get A/D filter: -9.255963e+061 result=40 08:58:54 Get A/D value=-858993460 result=40 08:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:58:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:58:54 Aux= 08:58:54 Message to Camera, serial 59665 queued 08:59:31 Received message from Master: op=PointingHead serial=59678 08:59:31 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:59:31 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:59:31 Point started: ret=0 08:59:31 point_skyscan result=0 08:59:32 Check angles 08:59:32 SkyScan query 08:59:33 SkyScan query done: ret=0 az=63.96<-4264 ze=66.555<-7563 Statuses=0009 0008 08:59:33 Msec=0 True Az=63.96 Ze=66.555 Az status=0009 Ze status=0008 08:59:33 Check angles 08:59:33 SkyScan query 08:59:33 SkyScan query done: ret=0 az=81.81<-5454 ze=66.51<-7566 Statuses=0009 0008 08:59:33 Msec=750 True Az=81.81 Ze=66.51 Az status=0009 Ze status=0008 08:59:34 Check angles 08:59:34 SkyScan query 08:59:34 SkyScan query done: ret=0 az=99.27<-6618 ze=66.495<-7567 Statuses=0009 0008 08:59:34 Msec=1500 True Az=99.27 Ze=66.495 Az status=0009 Ze status=0008 08:59:34 Check angles 08:59:34 SkyScan query 08:59:35 SkyScan query done: ret=0 az=116.865<-7791 ze=66.495<-7567 Statuses=0009 0008 08:59:35 Msec=2250 True Az=116.865 Ze=66.495 Az status=0009 Ze status=0008 08:59:35 Check angles 08:59:35 SkyScan query 08:59:36 SkyScan query done: ret=0 az=134.355<-8957 ze=66.495<-7567 Statuses=0009 0008 08:59:36 Msec=3000 True Az=134.355 Ze=66.495 Az status=0009 Ze status=0008 08:59:36 Check angles 08:59:36 SkyScan query 08:59:36 SkyScan query done: ret=0 az=151.71<-10114 ze=66.495<-7567 Statuses=0009 0008 08:59:36 Msec=3750 True Az=151.71 Ze=66.495 Az status=0009 Ze status=0008 08:59:37 Check angles 08:59:37 SkyScan query 08:59:37 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:59:37 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:59:37 Message to Master queued w/err=0: serial=59678 error=0 08:59:42 Received message from Master: op=Filter serial=59679 08:59:42 Color wheel filter change from 0 to 0 08:59:42 FLIGetFilterPos err=0 currentPosition=0 08:59:42 FLIGetStepsRemaining err=0 RemainingSteps=0 08:59:42 Filter is already there-color wheel unchanged 08:59:42 Received message from Master: op=Shutter serial=59680 08:59:42 Shutter LASER close 08:59:42 Received message from Camera: op=State serial=59682 08:59:42 GetSingleValue result=40 Value=cccccccc 08:59:42 SkyScan query 08:59:43 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:59:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:43 Parameters OK 08:59:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:43 Set A/D data flow result=40 08:59:43 Set A/D channel type result=40 08:59:43 Set A/D encoding result=40 08:59:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:43 Set channel filter=0.000000e+000 result=40 08:59:43 Config A/D Result=40 08:59:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:43 Get A/D filter: -9.255963e+061 result=40 08:59:43 Get A/D value=-858993460 result=40 08:59:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:43 Parameters OK 08:59:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:43 Set A/D data flow result=40 08:59:43 Set A/D channel type result=40 08:59:43 Set A/D encoding result=40 08:59:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:43 Set channel filter=0.000000e+000 result=40 08:59:43 Config A/D Result=40 08:59:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:43 Get A/D filter: -9.255963e+061 result=40 08:59:43 Get A/D value=-858993460 result=40 08:59:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:43 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:59:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:59:43 Aux= 08:59:43 Message to Camera, serial 59682 queued 09:00:20 Received message from Master: op=PointingHead serial=59695 09:00:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:00:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:00:20 Point started: ret=0 09:00:20 point_skyscan result=0 09:00:21 Check angles 09:00:21 SkyScan query 09:00:21 SkyScan query done: ret=0 az=134.97<-8998 ze=36.66<-9556 Statuses=0009 0009 09:00:21 Msec=0 True Az=134.97 Ze=36.66 Az status=0009 Ze status=0009 09:00:22 Check angles 09:00:22 SkyScan query 09:00:22 SkyScan query done: ret=0 az=117.48<-7832 ze=15.735<-10951 Statuses=0009 0009 09:00:22 Msec=750 True Az=117.48 Ze=15.735 Az status=0009 Ze status=0009 09:00:22 Check angles 09:00:22 SkyScan query 09:00:23 SkyScan query done: ret=0 az=100.11<-6674 ze=-5.25<-12350 Statuses=0009 0009 09:00:23 Msec=1500 True Az=100.11 Ze=-5.25 Az status=0009 Ze status=0009 09:00:23 Check angles 09:00:23 SkyScan query 09:00:24 SkyScan query done: ret=0 az=82.245<-5483 ze=-26.625<-13775 Statuses=0009 0009 09:00:24 Msec=2250 True Az=82.245 Ze=-26.625 Az status=0009 Ze status=0009 09:00:24 Check angles 09:00:24 SkyScan query 09:00:24 SkyScan query done: ret=0 az=64.65<-4310 ze=-38.58<-14572 Statuses=0009 0008 09:00:24 Msec=3000 True Az=64.65 Ze=-38.58 Az status=0009 Ze status=0008 09:00:25 Check angles 09:00:25 SkyScan query 09:00:25 SkyScan query done: ret=0 az=47.235<-3149 ze=-38.52<-14568 Statuses=0009 0008 09:00:25 Msec=3750 True Az=47.235 Ze=-38.52 Az status=0009 Ze status=0008 09:00:25 Check angles 09:00:25 SkyScan query 09:00:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:00:26 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:00:26 Message to Master queued w/err=0: serial=59695 error=0 09:00:31 Received message from Master: op=Filter serial=59696 09:00:31 Color wheel filter change from 0 to 0 09:00:31 FLIGetFilterPos err=0 currentPosition=0 09:00:31 FLIGetStepsRemaining err=0 RemainingSteps=0 09:00:31 Filter is already there-color wheel unchanged 09:00:31 Received message from Master: op=Shutter serial=59697 09:00:31 Shutter LASER close 09:00:31 Received message from Camera: op=State serial=59699 09:00:31 GetSingleValue result=40 Value=cccccccc 09:00:31 SkyScan query 09:00:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:00:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:32 Parameters OK 09:00:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:32 Set A/D data flow result=40 09:00:32 Set A/D channel type result=40 09:00:32 Set A/D encoding result=40 09:00:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:32 Set channel filter=0.000000e+000 result=40 09:00:32 Config A/D Result=40 09:00:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:32 Get A/D filter: -9.255963e+061 result=40 09:00:32 Get A/D value=-858993460 result=40 09:00:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:32 Parameters OK 09:00:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:32 Set A/D data flow result=40 09:00:32 Set A/D channel type result=40 09:00:32 Set A/D encoding result=40 09:00:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:32 Set channel filter=0.000000e+000 result=40 09:00:32 Config A/D Result=40 09:00:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:32 Get A/D filter: -9.255963e+061 result=40 09:00:32 Get A/D value=-858993460 result=40 09:00:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:00:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:00:32 Aux= 09:00:32 Message to Camera, serial 59699 queued 09:01:09 Received message from Master: op=PointingHead serial=59712 09:01:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:01:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:01:09 Point started: ret=0 09:01:09 point_skyscan result=0 09:01:10 Check angles 09:01:10 SkyScan query 09:01:10 SkyScan query done: ret=0 az=63.93<-4262 ze=-68.22<-16548 Statuses=0009 0009 09:01:10 Msec=0 True Az=63.93 Ze=-68.22 Az status=0009 Ze status=0009 09:01:10 Check angles 09:01:10 SkyScan query 09:01:11 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.205<-17947 Statuses=0009 0009 09:01:11 Msec=750 True Az=81.315 Ze=-89.205 Az status=0009 Ze status=0009 09:01:11 Check angles 09:01:11 SkyScan query 09:01:12 SkyScan query done: ret=0 az=98.91<-6594 ze=-110.13<-19342 Statuses=0009 0009 09:01:12 Msec=1500 True Az=98.91 Ze=-110.13 Az status=0009 Ze status=0009 09:01:12 Check angles 09:01:12 SkyScan query 09:01:13 SkyScan query done: ret=0 az=116.46<-7764 ze=-131.1<-20740 Statuses=0009 0009 09:01:13 Msec=2250 True Az=116.46 Ze=-131.1 Az status=0009 Ze status=0009 09:01:13 Check angles 09:01:13 SkyScan query 09:01:13 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 09:01:13 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 09:01:13 Check angles 09:01:13 SkyScan query 09:01:14 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:01:14 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:01:14 Message to Master queued w/err=0: serial=59712 error=0 09:01:19 Received message from Master: op=Filter serial=59713 09:01:19 Color wheel filter change from 0 to 0 09:01:19 FLIGetFilterPos err=0 currentPosition=0 09:01:19 FLIGetStepsRemaining err=0 RemainingSteps=0 09:01:19 Filter is already there-color wheel unchanged 09:01:19 Received message from Master: op=Shutter serial=59714 09:01:19 Shutter LASER close 09:01:19 Received message from Camera: op=State serial=59716 09:01:19 GetSingleValue result=40 Value=cccccccc 09:01:19 SkyScan query 09:01:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:01:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:20 Parameters OK 09:01:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:20 Set A/D data flow result=40 09:01:20 Set A/D channel type result=40 09:01:20 Set A/D encoding result=40 09:01:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:20 Set channel filter=0.000000e+000 result=40 09:01:20 Config A/D Result=40 09:01:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:20 Get A/D filter: -9.255963e+061 result=40 09:01:20 Get A/D value=-858993460 result=40 09:01:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:20 Parameters OK 09:01:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:20 Set A/D data flow result=40 09:01:20 Set A/D channel type result=40 09:01:20 Set A/D encoding result=40 09:01:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:20 Set channel filter=0.000000e+000 result=40 09:01:20 Config A/D Result=40 09:01:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:20 Get A/D filter: -9.255963e+061 result=40 09:01:20 Get A/D value=-858993460 result=40 09:01:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:01:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:01:20 Aux= 09:01:20 Message to Camera, serial 59716 queued 09:01:57 Received message from Master: op=PointingHead serial=59729 09:01:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:01:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:01:57 Point started: ret=0 09:01:57 point_skyscan result=0 09:01:58 Check angles 09:01:58 SkyScan query 09:01:58 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.91<-23394 Statuses=0009 0009 09:01:58 Msec=0 True Az=113.01 Ze=-170.91 Az status=0009 Ze status=0009 09:01:59 Check angles 09:01:59 SkyScan query 09:01:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:01:59 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:01:59 Message to Master queued w/err=0: serial=59729 error=0 09:02:04 Received message from Master: op=Filter serial=59730 09:02:04 Color wheel filter change from 0 to 0 09:02:04 FLIGetFilterPos err=0 currentPosition=0 09:02:04 FLIGetStepsRemaining err=0 RemainingSteps=0 09:02:04 Filter is already there-color wheel unchanged 09:02:04 Received message from Master: op=Shutter serial=59731 09:02:04 Shutter LASER open 09:02:04 Received message from Camera: op=State serial=59733 09:02:04 GetSingleValue result=40 Value=cccccccc 09:02:04 SkyScan query 09:02:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:02:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:05 Parameters OK 09:02:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:05 Set A/D data flow result=40 09:02:05 Set A/D channel type result=40 09:02:05 Set A/D encoding result=40 09:02:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:05 Set channel filter=0.000000e+000 result=40 09:02:05 Config A/D Result=40 09:02:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:05 Get A/D filter: -9.255963e+061 result=40 09:02:05 Get A/D value=-858993460 result=40 09:02:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:05 Parameters OK 09:02:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:05 Set A/D data flow result=40 09:02:05 Set A/D channel type result=40 09:02:05 Set A/D encoding result=40 09:02:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:05 Set channel filter=0.000000e+000 result=40 09:02:05 Config A/D Result=40 09:02:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:05 Get A/D filter: -9.255963e+061 result=40 09:02:05 Get A/D value=-858993460 result=40 09:02:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:02:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:02:05 Aux= 09:02:05 Message to Camera, serial 59733 queued 09:02:13 Received message from Master: op=Shutter serial=59743 09:02:13 Shutter LASER close 09:02:14 Received message from Master: op=PointingHead serial=59747 09:02:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:02:14 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:02:14 Point started: ret=0 09:02:14 point_skyscan result=0 09:02:15 Check angles 09:02:15 SkyScan query 09:02:16 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.115<-21541 Statuses=0009 0009 09:02:16 Msec=0 True Az=136.155 Ze=-143.115 Az status=0009 Ze status=0009 09:02:16 Check angles 09:02:16 SkyScan query 09:02:16 SkyScan query done: ret=0 az=154.02<-10268 ze=-121.71<-20114 Statuses=0009 0009 09:02:16 Msec=750 True Az=154.02 Ze=-121.71 Az status=0009 Ze status=0009 09:02:17 Check angles 09:02:17 SkyScan query 09:02:17 SkyScan query done: ret=0 az=171.51<-11434 ze=-100.74<-18716 Statuses=0009 0009 09:02:17 Msec=1500 True Az=171.51 Ze=-100.74 Az status=0009 Ze status=0009 09:02:17 Check angles 09:02:17 SkyScan query 09:02:18 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.845<-17323 Statuses=0008 0009 09:02:18 Msec=2250 True Az=176.025 Ze=-79.845 Az status=0008 Ze status=0009 09:02:18 Check angles 09:02:18 SkyScan query 09:02:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.845<-15923 Statuses=0008 0009 09:02:19 Msec=3000 True Az=175.995 Ze=-58.845 Az status=0008 Ze status=0009 09:02:19 Check angles 09:02:19 SkyScan query 09:02:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:02:19 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:02:19 Message to Master queued w/err=0: serial=59747 error=0 09:02:24 Received message from Master: op=Filter serial=59748 09:02:24 Color wheel filter change from 0 to 0 09:02:24 FLIGetFilterPos err=0 currentPosition=0 09:02:24 FLIGetStepsRemaining err=0 RemainingSteps=0 09:02:24 Filter is already there-color wheel unchanged 09:02:25 Received message from Master: op=Shutter serial=59749 09:02:25 Shutter LASER close 09:02:25 Received message from Camera: op=State serial=59751 09:02:25 GetSingleValue result=40 Value=cccccccc 09:02:25 SkyScan query 09:02:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:02:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:25 Parameters OK 09:02:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:25 Set A/D data flow result=40 09:02:25 Set A/D channel type result=40 09:02:25 Set A/D encoding result=40 09:02:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:25 Set channel filter=0.000000e+000 result=40 09:02:25 Config A/D Result=40 09:02:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:25 Get A/D filter: -9.255963e+061 result=40 09:02:25 Get A/D value=-858993460 result=40 09:02:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:25 Parameters OK 09:02:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:25 Set A/D data flow result=40 09:02:25 Set A/D channel type result=40 09:02:25 Set A/D encoding result=40 09:02:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:25 Set channel filter=0.000000e+000 result=40 09:02:25 Config A/D Result=40 09:02:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:25 Get A/D filter: -9.255963e+061 result=40 09:02:25 Get A/D value=-858993460 result=40 09:02:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:02:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:02:25 Aux= 09:02:25 Message to Camera, serial 59751 queued 09:03:02 Received message from Master: op=PointingHead serial=59764 09:03:02 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:03:02 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:03:03 Point started: ret=0 09:03:03 point_skyscan result=0 09:03:03 Check angles 09:03:03 SkyScan query 09:03:04 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.885<-13459 Statuses=0009 0009 09:03:04 Msec=0 True Az=152.985 Ze=-21.885 Az status=0009 Ze status=0009 09:03:04 Check angles 09:03:04 SkyScan query 09:03:05 SkyScan query done: ret=0 az=135.285<-9019 ze=-0.45<-12030 Statuses=0009 0009 09:03:05 Msec=750 True Az=135.285 Ze=-0.45 Az status=0009 Ze status=0009 09:03:05 Check angles 09:03:05 SkyScan query 09:03:05 SkyScan query done: ret=0 az=117.735<-7849 ze=20.535<-10631 Statuses=0009 0009 09:03:05 Msec=1500 True Az=117.735 Ze=20.535 Az status=0009 Ze status=0009 09:03:06 Check angles 09:03:06 SkyScan query 09:03:06 SkyScan query done: ret=0 az=99.945<-6663 ze=41.865<-9209 Statuses=0009 0009 09:03:06 Msec=2250 True Az=99.945 Ze=41.865 Az status=0009 Ze status=0009 09:03:06 Check angles 09:03:06 SkyScan query 09:03:07 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 09:03:07 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 09:03:07 Check angles 09:03:07 SkyScan query 09:03:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:03:08 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:03:08 Message to Master queued w/err=0: serial=59764 error=0 09:03:13 Received message from Master: op=Filter serial=59765 09:03:13 Color wheel filter change from 0 to 0 09:03:13 FLIGetFilterPos err=0 currentPosition=0 09:03:13 FLIGetStepsRemaining err=0 RemainingSteps=0 09:03:13 Filter is already there-color wheel unchanged 09:03:13 Received message from Master: op=Shutter serial=59766 09:03:13 Shutter LASER close 09:03:13 Received message from Camera: op=State serial=59768 09:03:13 GetSingleValue result=40 Value=cccccccc 09:03:13 SkyScan query 09:03:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:03:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:13 Parameters OK 09:03:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:13 Set A/D data flow result=40 09:03:13 Set A/D channel type result=40 09:03:13 Set A/D encoding result=40 09:03:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:13 Set channel filter=0.000000e+000 result=40 09:03:13 Config A/D Result=40 09:03:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:13 Get A/D filter: -9.255963e+061 result=40 09:03:13 Get A/D value=-858993460 result=40 09:03:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:13 Parameters OK 09:03:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:13 Set A/D data flow result=40 09:03:13 Set A/D channel type result=40 09:03:13 Set A/D encoding result=40 09:03:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:13 Set channel filter=0.000000e+000 result=40 09:03:13 Config A/D Result=40 09:03:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:13 Get A/D filter: -9.255963e+061 result=40 09:03:13 Get A/D value=-858993460 result=40 09:03:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:03:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:03:13 Aux= 09:03:13 Message to Camera, serial 59768 queued 09:03:49 Received message from Master: op=PointingHead serial=59780 09:03:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:03:49 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:03:50 Point started: ret=0 09:03:50 point_skyscan result=0 09:03:50 Check angles 09:03:50 SkyScan query 09:03:51 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 09:03:51 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 09:03:51 Check angles 09:03:51 SkyScan query 09:03:52 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 09:03:52 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 09:03:52 Check angles 09:03:52 SkyScan query 09:03:53 SkyScan query done: ret=0 az=144.105<-9607 ze=38.505<-9433 Statuses=0009 0008 09:03:53 Msec=1500 True Az=144.105 Ze=38.505 Az status=0009 Ze status=0008 09:03:53 Check angles 09:03:53 SkyScan query 09:03:53 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 09:03:53 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 09:03:53 Check angles 09:03:53 SkyScan query 09:03:54 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 09:03:54 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 09:03:54 Check angles 09:03:54 SkyScan query 09:03:55 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:03:55 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:03:55 Message to Master queued w/err=0: serial=59780 error=0 09:04:00 Received message from Master: op=Filter serial=59781 09:04:00 Color wheel filter change from 0 to 0 09:04:00 FLIGetFilterPos err=0 currentPosition=0 09:04:00 FLIGetStepsRemaining err=0 RemainingSteps=0 09:04:00 Filter is already there-color wheel unchanged 09:04:00 Received message from Master: op=Shutter serial=59782 09:04:00 Shutter LASER close 09:04:00 Received message from Camera: op=State serial=59784 09:04:00 GetSingleValue result=40 Value=cccccccc 09:04:00 SkyScan query 09:04:01 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:04:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:01 Parameters OK 09:04:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:01 Set A/D data flow result=40 09:04:01 Set A/D channel type result=40 09:04:01 Set A/D encoding result=40 09:04:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:01 Set channel filter=0.000000e+000 result=40 09:04:01 Config A/D Result=40 09:04:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:01 Get A/D filter: -9.255963e+061 result=40 09:04:01 Get A/D value=-858993460 result=40 09:04:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:01 Parameters OK 09:04:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:01 Set A/D data flow result=40 09:04:01 Set A/D channel type result=40 09:04:01 Set A/D encoding result=40 09:04:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:01 Set channel filter=0.000000e+000 result=40 09:04:01 Config A/D Result=40 09:04:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:01 Get A/D filter: -9.255963e+061 result=40 09:04:01 Get A/D value=-858993460 result=40 09:04:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:04:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:04:01 Aux= 09:04:01 Message to Camera, serial 59784 queued 09:04:37 Received message from Master: op=PointingHead serial=59797 09:04:37 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:04:37 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:04:38 Point started: ret=0 09:04:38 point_skyscan result=0 09:04:39 Check angles 09:04:39 SkyScan query 09:04:39 SkyScan query done: ret=0 az=152.775<-10185 ze=8.355<-11443 Statuses=0009 0009 09:04:39 Msec=0 True Az=152.775 Ze=8.355 Az status=0009 Ze status=0009 09:04:39 Check angles 09:04:39 SkyScan query 09:04:40 SkyScan query done: ret=0 az=134.955<-8997 ze=-13.035<-12869 Statuses=0009 0009 09:04:40 Msec=750 True Az=134.955 Ze=-13.035 Az status=0009 Ze status=0009 09:04:40 Check angles 09:04:40 SkyScan query 09:04:41 SkyScan query done: ret=0 az=117.3<-7820 ze=-33.99<-14266 Statuses=0009 0009 09:04:41 Msec=1500 True Az=117.3 Ze=-33.99 Az status=0009 Ze status=0009 09:04:41 Check angles 09:04:41 SkyScan query 09:04:41 SkyScan query done: ret=0 az=99.975<-6665 ze=-51.57<-15438 Statuses=0009 0009 09:04:41 Msec=2250 True Az=99.975 Ze=-51.57 Az status=0009 Ze status=0009 09:04:42 Check angles 09:04:42 SkyScan query 09:04:42 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.525<-15435 Statuses=0009 0008 09:04:42 Msec=3000 True Az=86.055 Ze=-51.525 Az status=0009 Ze status=0008 09:04:42 Check angles 09:04:42 SkyScan query 09:04:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:04:43 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:04:43 Message to Master queued w/err=0: serial=59797 error=0 09:04:48 Received message from Master: op=Filter serial=59798 09:04:48 Color wheel filter change from 0 to 0 09:04:48 FLIGetFilterPos err=0 currentPosition=0 09:04:48 FLIGetStepsRemaining err=0 RemainingSteps=0 09:04:48 Filter is already there-color wheel unchanged 09:04:48 Received message from Master: op=Shutter serial=59799 09:04:48 Shutter LASER close 09:04:48 Received message from Camera: op=State serial=59801 09:04:48 GetSingleValue result=40 Value=cccccccc 09:04:48 SkyScan query 09:04:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:04:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:49 Parameters OK 09:04:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:49 Set A/D data flow result=40 09:04:49 Set A/D channel type result=40 09:04:49 Set A/D encoding result=40 09:04:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:49 Set channel filter=0.000000e+000 result=40 09:04:49 Config A/D Result=40 09:04:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:49 Get A/D filter: -9.255963e+061 result=40 09:04:49 Get A/D value=-858993460 result=40 09:04:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:49 Parameters OK 09:04:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:49 Set A/D data flow result=40 09:04:49 Set A/D channel type result=40 09:04:49 Set A/D encoding result=40 09:04:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:49 Set channel filter=0.000000e+000 result=40 09:04:49 Config A/D Result=40 09:04:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:49 Get A/D filter: -9.255963e+061 result=40 09:04:49 Get A/D value=-858993460 result=40 09:04:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:04:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:04:49 Aux= 09:04:49 Message to Camera, serial 59801 queued 09:05:26 Received message from Master: op=PointingHead serial=59814 09:05:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:05:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:05:26 Point started: ret=0 09:05:26 point_skyscan result=0 09:05:27 Check angles 09:05:27 SkyScan query 09:05:27 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.57<-17438 Statuses=0009 0009 09:05:27 Msec=0 True Az=109.185 Ze=-81.57 Az status=0009 Ze status=0009 09:05:27 Check angles 09:05:27 SkyScan query 09:05:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.975<-18865 Statuses=0008 0009 09:05:28 Msec=750 True Az=112.995 Ze=-102.975 Az status=0008 Ze status=0009 09:05:28 Check angles 09:05:28 SkyScan query 09:05:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.915<-20261 Statuses=0008 0009 09:05:29 Msec=1500 True Az=112.995 Ze=-123.915 Az status=0008 Ze status=0009 09:05:29 Check angles 09:05:29 SkyScan query 09:05:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.87<-21658 Statuses=0008 0009 09:05:30 Msec=2250 True Az=112.995 Ze=-144.87 Az status=0008 Ze status=0009 09:05:30 Check angles 09:05:30 SkyScan query 09:05:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.81<-23054 Statuses=0008 0009 09:05:30 Msec=3000 True Az=112.995 Ze=-165.81 Az status=0008 Ze status=0009 09:05:30 Check angles 09:05:30 SkyScan query 09:05:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:05:31 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:05:31 Message to Master queued w/err=0: serial=59814 error=0 09:05:36 Received message from Master: op=Filter serial=59815 09:05:36 Color wheel filter change from 0 to 0 09:05:36 FLIGetFilterPos err=0 currentPosition=0 09:05:36 FLIGetStepsRemaining err=0 RemainingSteps=0 09:05:36 Filter is already there-color wheel unchanged 09:05:36 Received message from Master: op=Shutter serial=59816 09:05:36 Shutter LASER open 09:05:36 Received message from Camera: op=State serial=59818 09:05:36 GetSingleValue result=40 Value=cccccccc 09:05:36 SkyScan query 09:05:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:05:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:37 Parameters OK 09:05:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:37 Set A/D data flow result=40 09:05:37 Set A/D channel type result=40 09:05:37 Set A/D encoding result=40 09:05:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:37 Set channel filter=0.000000e+000 result=40 09:05:37 Config A/D Result=40 09:05:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:37 Get A/D filter: -9.255963e+061 result=40 09:05:37 Get A/D value=-858993460 result=40 09:05:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:37 Parameters OK 09:05:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:37 Set A/D data flow result=40 09:05:37 Set A/D channel type result=40 09:05:37 Set A/D encoding result=40 09:05:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:37 Set channel filter=0.000000e+000 result=40 09:05:37 Config A/D Result=40 09:05:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:37 Get A/D filter: -9.255963e+061 result=40 09:05:37 Get A/D value=-858993460 result=40 09:05:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:05:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:05:37 Aux= 09:05:37 Message to Camera, serial 59818 queued 09:05:45 Received message from Master: op=Shutter serial=59828 09:05:45 Shutter LASER close 09:05:46 Received message from Master: op=PointingHead serial=59832 09:05:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:05:46 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-11 09:05:46] 09:05:46 Point started: ret=0 09:05:46 point_skyscan result=0 09:05:47 Check angles 09:05:47 SkyScan query 09:05:48 SkyScan query done: ret=0 az=88.41<-5894 ze=155.46<-1636 Statuses=0009 0009 09:05:48 Msec=0 True Az=88.41 Ze=155.46 Az status=0009 Ze status=0009 09:05:48 Check angles 09:05:48 SkyScan query 09:05:48 SkyScan query done: ret=0 az=70.965<-4731 ze=134.505<-3033 Statuses=0009 0009 09:05:48 Msec=750 True Az=70.965 Ze=134.505 Az status=0009 Ze status=0009 09:05:48 Check angles 09:05:48 SkyScan query 09:05:49 SkyScan query done: ret=0 az=53.655<-3577 ze=113.55<-4430 Statuses=0009 0009 09:05:49 Msec=1500 True Az=53.655 Ze=113.55 Az status=0009 Ze status=0009 09:05:49 Check angles 09:05:49 SkyScan query 09:05:50 SkyScan query done: ret=0 az=41.04<-2736 ze=92.595<-5827 Statuses=0009 0009 09:05:50 Msec=2250 True Az=41.04 Ze=92.595 Az status=0009 Ze status=0009 09:05:50 Check angles 09:05:50 SkyScan query 09:05:51 SkyScan query done: ret=0 az=40.995<-2733 ze=71.625<-7225 Statuses=0008 0009 09:05:51 Msec=3000 True Az=40.995 Ze=71.625 Az status=0008 Ze status=0009 09:05:51 Check angles 09:05:51 SkyScan query 09:05:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.93<-8538 Statuses=0008 0009 09:05:51 Msec=3750 True Az=40.995 Ze=51.93 Az status=0008 Ze status=0009 09:05:51 Check angles 09:05:51 SkyScan query 09:05:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:05:52 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:05:52 Message to Master queued w/err=0: serial=59832 error=0 09:05:57 Received message from Master: op=Filter serial=59833 09:05:57 Color wheel filter change from 0 to 0 09:05:57 FLIGetFilterPos err=0 currentPosition=0 09:05:57 FLIGetStepsRemaining err=0 RemainingSteps=0 09:05:57 Filter is already there-color wheel unchanged 09:05:57 Received message from Master: op=Shutter serial=59834 09:05:57 Shutter LASER close 09:05:57 Received message from Camera: op=State serial=59836 09:05:57 GetSingleValue result=40 Value=cccccccc 09:05:57 SkyScan query 09:05:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:05:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:58 Parameters OK 09:05:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:58 Set A/D data flow result=40 09:05:58 Set A/D channel type result=40 09:05:58 Set A/D encoding result=40 09:05:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:58 Set channel filter=0.000000e+000 result=40 09:05:58 Config A/D Result=40 09:05:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:58 Get A/D filter: -9.255963e+061 result=40 09:05:58 Get A/D value=-858993460 result=40 09:05:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:58 Parameters OK 09:05:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:58 Set A/D data flow result=40 09:05:58 Set A/D channel type result=40 09:05:58 Set A/D encoding result=40 09:05:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:58 Set channel filter=0.000000e+000 result=40 09:05:58 Config A/D Result=40 09:05:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:58 Get A/D filter: -9.255963e+061 result=40 09:05:58 Get A/D value=-858993460 result=40 09:05:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:05:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:05:58 Aux= 09:05:58 Message to Camera, serial 59836 queued 09:06:35 Received message from Master: op=PointingHead serial=59849 09:06:35 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:06:35 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:06:35 Point started: ret=0 09:06:35 point_skyscan result=0 09:06:36 Check angles 09:06:36 SkyScan query 09:06:36 SkyScan query done: ret=0 az=64.2<-4280 ze=66.555<-7563 Statuses=0009 0008 09:06:36 Msec=0 True Az=64.2 Ze=66.555 Az status=0009 Ze status=0008 09:06:37 Check angles 09:06:37 SkyScan query 09:06:37 SkyScan query done: ret=0 az=82.005<-5467 ze=66.495<-7567 Statuses=0009 0008 09:06:37 Msec=750 True Az=82.005 Ze=66.495 Az status=0009 Ze status=0008 09:06:37 Check angles 09:06:37 SkyScan query 09:06:38 SkyScan query done: ret=0 az=100.11<-6674 ze=66.495<-7567 Statuses=0009 0008 09:06:38 Msec=1500 True Az=100.11 Ze=66.495 Az status=0009 Ze status=0008 09:06:38 Check angles 09:06:38 SkyScan query 09:06:39 SkyScan query done: ret=0 az=117.375<-7825 ze=66.495<-7567 Statuses=0009 0008 09:06:39 Msec=2250 True Az=117.375 Ze=66.495 Az status=0009 Ze status=0008 09:06:39 Check angles 09:06:39 SkyScan query 09:06:40 SkyScan query done: ret=0 az=134.775<-8985 ze=66.495<-7567 Statuses=0009 0008 09:06:40 Msec=3000 True Az=134.775 Ze=66.495 Az status=0009 Ze status=0008 09:06:40 Check angles 09:06:40 SkyScan query 09:06:40 SkyScan query done: ret=0 az=152.37<-10158 ze=66.495<-7567 Statuses=0009 0008 09:06:40 Msec=3750 True Az=152.37 Ze=66.495 Az status=0009 Ze status=0008 09:06:40 Check angles 09:06:40 SkyScan query 09:06:41 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 09:06:41 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 09:06:41 Message to Master queued w/err=0: serial=59849 error=0 09:06:46 Received message from Master: op=Filter serial=59850 09:06:46 Color wheel filter change from 0 to 0 09:06:46 FLIGetFilterPos err=0 currentPosition=0 09:06:46 FLIGetStepsRemaining err=0 RemainingSteps=0 09:06:46 Filter is already there-color wheel unchanged 09:06:46 Received message from Master: op=Shutter serial=59851 09:06:46 Shutter LASER close 09:06:46 Received message from Camera: op=State serial=59853 09:06:46 GetSingleValue result=40 Value=cccccccc 09:06:46 SkyScan query 09:06:47 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:06:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:47 Parameters OK 09:06:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:47 Set A/D data flow result=40 09:06:47 Set A/D channel type result=40 09:06:47 Set A/D encoding result=40 09:06:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:47 Set channel filter=0.000000e+000 result=40 09:06:47 Config A/D Result=40 09:06:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:47 Get A/D filter: -9.255963e+061 result=40 09:06:47 Get A/D value=-858993460 result=40 09:06:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:47 Parameters OK 09:06:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:47 Set A/D data flow result=40 09:06:47 Set A/D channel type result=40 09:06:47 Set A/D encoding result=40 09:06:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:47 Set channel filter=0.000000e+000 result=40 09:06:47 Config A/D Result=40 09:06:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:47 Get A/D filter: -9.255963e+061 result=40 09:06:47 Get A/D value=-858993460 result=40 09:06:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:47 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:06:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:06:47 Aux= 09:06:47 Message to Camera, serial 59853 queued 09:07:24 Received message from Master: op=PointingHead serial=59866 09:07:24 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:07:24 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:07:24 Point started: ret=0 09:07:24 point_skyscan result=0 09:07:25 Check angles 09:07:25 SkyScan query 09:07:25 SkyScan query done: ret=0 az=135.06<-9004 ze=36.78<-9548 Statuses=0009 0009 09:07:25 Msec=0 True Az=135.06 Ze=36.78 Az status=0009 Ze status=0009 09:07:25 Check angles 09:07:25 SkyScan query 09:07:26 SkyScan query done: ret=0 az=117.57<-7838 ze=15.84<-10944 Statuses=0009 0009 09:07:26 Msec=750 True Az=117.57 Ze=15.84 Az status=0009 Ze status=0009 09:07:26 Check angles 09:07:26 SkyScan query 09:07:27 SkyScan query done: ret=0 az=100.185<-6679 ze=-5.115<-12341 Statuses=0009 0009 09:07:27 Msec=1500 True Az=100.185 Ze=-5.115 Az status=0009 Ze status=0009 09:07:27 Check angles 09:07:27 SkyScan query 09:07:28 SkyScan query done: ret=0 az=82.71<-5514 ze=-26.085<-13739 Statuses=0009 0009 09:07:28 Msec=2250 True Az=82.71 Ze=-26.085 Az status=0009 Ze status=0009 09:07:28 Check angles 09:07:28 SkyScan query 09:07:28 SkyScan query done: ret=0 az=65.175<-4345 ze=-38.565<-14571 Statuses=0009 0008 09:07:28 Msec=3000 True Az=65.175 Ze=-38.565 Az status=0009 Ze status=0008 09:07:28 Check angles 09:07:28 SkyScan query 09:07:29 SkyScan query done: ret=0 az=47.745<-3183 ze=-38.535<-14569 Statuses=0009 0008 09:07:29 Msec=3750 True Az=47.745 Ze=-38.535 Az status=0009 Ze status=0008 09:07:29 Check angles 09:07:29 SkyScan query 09:07:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:07:30 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:07:30 Message to Master queued w/err=0: serial=59866 error=0 09:07:35 Received message from Master: op=Filter serial=59867 09:07:35 Color wheel filter change from 0 to 0 09:07:35 FLIGetFilterPos err=0 currentPosition=0 09:07:35 FLIGetStepsRemaining err=0 RemainingSteps=0 09:07:35 Filter is already there-color wheel unchanged 09:07:35 Received message from Master: op=Shutter serial=59868 09:07:35 Shutter LASER close 09:07:35 Received message from Camera: op=State serial=59870 09:07:35 GetSingleValue result=40 Value=cccccccc 09:07:35 SkyScan query 09:07:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:07:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:36 Parameters OK 09:07:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:36 Set A/D data flow result=40 09:07:36 Set A/D channel type result=40 09:07:36 Set A/D encoding result=40 09:07:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:36 Set channel filter=0.000000e+000 result=40 09:07:36 Config A/D Result=40 09:07:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:36 Get A/D filter: -9.255963e+061 result=40 09:07:36 Get A/D value=-858993460 result=40 09:07:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:36 Parameters OK 09:07:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:36 Set A/D data flow result=40 09:07:36 Set A/D channel type result=40 09:07:36 Set A/D encoding result=40 09:07:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:36 Set channel filter=0.000000e+000 result=40 09:07:36 Config A/D Result=40 09:07:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:36 Get A/D filter: -9.255963e+061 result=40 09:07:36 Get A/D value=-858993460 result=40 09:07:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:07:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:07:36 Aux= 09:07:36 Message to Camera, serial 59870 queued 09:08:12 Received message from Master: op=PointingHead serial=59883 09:08:12 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:08:12 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:08:13 Point started: ret=0 09:08:13 point_skyscan result=0 09:08:14 Check angles 09:08:14 SkyScan query 09:08:14 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.745<-16583 Statuses=0009 0009 09:08:14 Msec=0 True Az=64.425 Ze=-68.745 Az status=0009 Ze status=0009 09:08:14 Check angles 09:08:14 SkyScan query 09:08:15 SkyScan query done: ret=0 az=81.795<-5453 ze=-89.7<-17980 Statuses=0009 0009 09:08:15 Msec=750 True Az=81.795 Ze=-89.7 Az status=0009 Ze status=0009 09:08:15 Check angles 09:08:15 SkyScan query 09:08:16 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.67<-19378 Statuses=0009 0009 09:08:16 Msec=1500 True Az=99.36 Ze=-110.67 Az status=0009 Ze status=0009 09:08:16 Check angles 09:08:16 SkyScan query 09:08:16 SkyScan query done: ret=0 az=116.865<-7791 ze=-131.58<-20772 Statuses=0009 0009 09:08:16 Msec=2250 True Az=116.865 Ze=-131.58 Az status=0009 Ze status=0009 09:08:17 Check angles 09:08:17 SkyScan query 09:08:17 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 09:08:17 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 09:08:17 Check angles 09:08:17 SkyScan query 09:08:18 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:08:18 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:08:18 Message to Master queued w/err=0: serial=59883 error=0 09:08:23 Received message from Master: op=Filter serial=59884 09:08:23 Color wheel filter change from 0 to 0 09:08:23 FLIGetFilterPos err=0 currentPosition=0 09:08:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:08:23 Filter is already there-color wheel unchanged 09:08:23 Received message from Master: op=Shutter serial=59885 09:08:23 Shutter LASER close 09:08:23 Received message from Camera: op=State serial=59887 09:08:23 GetSingleValue result=40 Value=cccccccc 09:08:23 SkyScan query 09:08:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:08:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:24 Parameters OK 09:08:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:24 Set A/D data flow result=40 09:08:24 Set A/D channel type result=40 09:08:24 Set A/D encoding result=40 09:08:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:24 Set channel filter=0.000000e+000 result=40 09:08:24 Config A/D Result=40 09:08:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:24 Get A/D filter: -9.255963e+061 result=40 09:08:24 Get A/D value=-858993460 result=40 09:08:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:24 Parameters OK 09:08:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:24 Set A/D data flow result=40 09:08:24 Set A/D channel type result=40 09:08:24 Set A/D encoding result=40 09:08:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:24 Set channel filter=0.000000e+000 result=40 09:08:24 Config A/D Result=40 09:08:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:24 Get A/D filter: -9.255963e+061 result=40 09:08:24 Get A/D value=-858993460 result=40 09:08:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:24 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:08:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:08:24 Aux= 09:08:24 Message to Camera, serial 59887 queued 09:09:00 Received message from Master: op=PointingHead serial=59899 09:09:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:09:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:09:00 Point started: ret=0 09:09:00 point_skyscan result=0 09:09:01 Check angles 09:09:01 SkyScan query 09:09:01 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 09:09:01 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 09:09:01 Check angles 09:09:01 SkyScan query 09:09:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:09:02 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:09:02 Message to Master queued w/err=0: serial=59899 error=0 09:09:07 Received message from Master: op=Filter serial=59900 09:09:07 Color wheel filter change from 0 to 0 09:09:07 FLIGetFilterPos err=0 currentPosition=0 09:09:07 FLIGetStepsRemaining err=0 RemainingSteps=0 09:09:07 Filter is already there-color wheel unchanged 09:09:07 Received message from Master: op=Shutter serial=59901 09:09:07 Shutter LASER open 09:09:07 Received message from Camera: op=State serial=59903 09:09:07 GetSingleValue result=40 Value=cccccccc 09:09:07 SkyScan query 09:09:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:09:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:08 Parameters OK 09:09:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:08 Set A/D data flow result=40 09:09:08 Set A/D channel type result=40 09:09:08 Set A/D encoding result=40 09:09:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:08 Set channel filter=0.000000e+000 result=40 09:09:08 Config A/D Result=40 09:09:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:08 Get A/D filter: -9.255963e+061 result=40 09:09:08 Get A/D value=-858993460 result=40 09:09:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:08 Parameters OK 09:09:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:08 Set A/D data flow result=40 09:09:08 Set A/D channel type result=40 09:09:08 Set A/D encoding result=40 09:09:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:08 Set channel filter=0.000000e+000 result=40 09:09:08 Config A/D Result=40 09:09:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:08 Get A/D filter: -9.255963e+061 result=40 09:09:08 Get A/D value=-858993460 result=40 09:09:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:09:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:09:08 Aux= 09:09:08 Message to Camera, serial 59903 queued 09:09:16 Received message from Master: op=Shutter serial=59913 09:09:16 Shutter LASER close 09:09:17 Received message from Master: op=PointingHead serial=59917 09:09:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:09:17 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:09:17 Point started: ret=0 09:09:17 point_skyscan result=0 09:09:18 Check angles 09:09:18 SkyScan query 09:09:19 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.92<-21528 Statuses=0009 0009 09:09:19 Msec=0 True Az=136.35 Ze=-142.92 Az status=0009 Ze status=0009 09:09:19 Check angles 09:09:19 SkyScan query 09:09:19 SkyScan query done: ret=0 az=154.245<-10283 ze=-121.56<-20104 Statuses=0009 0009 09:09:19 Msec=750 True Az=154.245 Ze=-121.56 Az status=0009 Ze status=0009 09:09:20 Check angles 09:09:20 SkyScan query 09:09:20 SkyScan query done: ret=0 az=171.675<-11445 ze=-100.53<-18702 Statuses=0009 0009 09:09:20 Msec=1500 True Az=171.675 Ze=-100.53 Az status=0009 Ze status=0009 09:09:20 Check angles 09:09:20 SkyScan query 09:09:21 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.62<-17308 Statuses=0008 0009 09:09:21 Msec=2250 True Az=176.025 Ze=-79.62 Az status=0008 Ze status=0009 09:09:21 Check angles 09:09:21 SkyScan query 09:09:22 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.2<-15880 Statuses=0008 0009 09:09:22 Msec=3000 True Az=176.01 Ze=-58.2 Az status=0008 Ze status=0009 09:09:22 Check angles 09:09:22 SkyScan query 09:09:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:09:22 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:09:22 Message to Master queued w/err=0: serial=59917 error=0 09:09:27 Received message from Master: op=Filter serial=59918 09:09:27 Color wheel filter change from 0 to 0 09:09:27 FLIGetFilterPos err=0 currentPosition=0 09:09:27 FLIGetStepsRemaining err=0 RemainingSteps=0 09:09:27 Filter is already there-color wheel unchanged 09:09:28 Received message from Master: op=Shutter serial=59919 09:09:28 Shutter LASER close 09:09:28 Received message from Camera: op=State serial=59921 09:09:28 GetSingleValue result=40 Value=cccccccc 09:09:28 SkyScan query 09:09:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:09:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:28 Parameters OK 09:09:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:28 Set A/D data flow result=40 09:09:28 Set A/D channel type result=40 09:09:28 Set A/D encoding result=40 09:09:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:28 Set channel filter=0.000000e+000 result=40 09:09:28 Config A/D Result=40 09:09:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:28 Get A/D filter: -9.255963e+061 result=40 09:09:28 Get A/D value=-858993460 result=40 09:09:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:28 Parameters OK 09:09:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:28 Set A/D data flow result=40 09:09:28 Set A/D channel type result=40 09:09:28 Set A/D encoding result=40 09:09:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:28 Set channel filter=0.000000e+000 result=40 09:09:28 Config A/D Result=40 09:09:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:28 Get A/D filter: -9.255963e+061 result=40 09:09:28 Get A/D value=-858993460 result=40 09:09:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:09:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:09:28 Aux= 09:09:28 Message to Camera, serial 59921 queued 09:10:05 Received message from Master: op=PointingHead serial=59934 09:10:05 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:10:05 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:10:05 Point started: ret=0 09:10:05 point_skyscan result=0 09:10:06 Check angles 09:10:06 SkyScan query 09:10:07 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.81<-13454 Statuses=0009 0009 09:10:07 Msec=0 True Az=152.985 Ze=-21.81 Az status=0009 Ze status=0009 09:10:07 Check angles 09:10:07 SkyScan query 09:10:08 SkyScan query done: ret=0 az=135.66<-9044 ze=-0.84<-12056 Statuses=0009 0009 09:10:08 Msec=750 True Az=135.66 Ze=-0.84 Az status=0009 Ze status=0009 09:10:08 Check angles 09:10:08 SkyScan query 09:10:08 SkyScan query done: ret=0 az=118.065<-7871 ze=20.1<-10660 Statuses=0009 0009 09:10:08 Msec=1500 True Az=118.065 Ze=20.1 Az status=0009 Ze status=0009 09:10:08 Check angles 09:10:08 SkyScan query 09:10:09 SkyScan query done: ret=0 az=100.515<-6701 ze=41.085<-9261 Statuses=0009 0009 09:10:09 Msec=2250 True Az=100.515 Ze=41.085 Az status=0009 Ze status=0009 09:10:09 Check angles 09:10:09 SkyScan query 09:10:10 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 09:10:10 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 09:10:10 Check angles 09:10:10 SkyScan query 09:10:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:10:11 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:10:11 Message to Master queued w/err=0: serial=59934 error=0 09:10:16 Received message from Master: op=Filter serial=59935 09:10:16 Color wheel filter change from 0 to 0 09:10:16 FLIGetFilterPos err=0 currentPosition=0 09:10:16 FLIGetStepsRemaining err=0 RemainingSteps=0 09:10:16 Filter is already there-color wheel unchanged 09:10:16 Received message from Master: op=Shutter serial=59936 09:10:16 Shutter LASER close 09:10:16 Received message from Camera: op=State serial=59938 09:10:16 GetSingleValue result=40 Value=cccccccc 09:10:16 SkyScan query 09:10:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:10:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:16 Parameters OK 09:10:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:16 Set A/D data flow result=40 09:10:16 Set A/D channel type result=40 09:10:16 Set A/D encoding result=40 09:10:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:16 Set channel filter=0.000000e+000 result=40 09:10:16 Config A/D Result=40 09:10:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:16 Get A/D filter: -9.255963e+061 result=40 09:10:16 Get A/D value=-858993460 result=40 09:10:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:16 Parameters OK 09:10:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:16 Set A/D data flow result=40 09:10:16 Set A/D channel type result=40 09:10:16 Set A/D encoding result=40 09:10:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:16 Set channel filter=0.000000e+000 result=40 09:10:16 Config A/D Result=40 09:10:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:16 Get A/D filter: -9.255963e+061 result=40 09:10:16 Get A/D value=-858993460 result=40 09:10:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:10:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:10:16 Aux= 09:10:16 Message to Camera, serial 59938 queued 09:10:53 Received message from Master: op=PointingHead serial=59951 09:10:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:10:53 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:10:54 Point started: ret=0 09:10:54 point_skyscan result=0 09:10:54 Check angles 09:10:54 SkyScan query 09:10:55 SkyScan query done: ret=0 az=108.795<-7253 ze=38.475<-9435 Statuses=0009 0008 09:10:55 Msec=0 True Az=108.795 Ze=38.475 Az status=0009 Ze status=0008 09:10:55 Check angles 09:10:55 SkyScan query 09:10:56 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 09:10:56 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 09:10:56 Check angles 09:10:56 SkyScan query 09:10:56 SkyScan query done: ret=0 az=144.165<-9611 ze=38.505<-9433 Statuses=0009 0008 09:10:56 Msec=1500 True Az=144.165 Ze=38.505 Az status=0009 Ze status=0008 09:10:57 Check angles 09:10:57 SkyScan query 09:10:57 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 09:10:57 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 09:10:57 Check angles 09:10:57 SkyScan query 09:10:58 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:10:58 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:10:58 Check angles 09:10:58 SkyScan query 09:10:59 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:10:59 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:10:59 Message to Master queued w/err=0: serial=59951 error=0 09:11:04 Received message from Master: op=Filter serial=59952 09:11:04 Color wheel filter change from 0 to 0 09:11:04 FLIGetFilterPos err=0 currentPosition=0 09:11:04 FLIGetStepsRemaining err=0 RemainingSteps=0 09:11:04 Filter is already there-color wheel unchanged 09:11:04 Received message from Master: op=Shutter serial=59953 09:11:04 Shutter LASER close 09:11:04 Received message from Camera: op=State serial=59955 09:11:04 GetSingleValue result=40 Value=cccccccc 09:11:04 SkyScan query 09:11:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:11:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:04 Parameters OK 09:11:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:04 Set A/D data flow result=40 09:11:04 Set A/D channel type result=40 09:11:04 Set A/D encoding result=40 09:11:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:04 Set channel filter=0.000000e+000 result=40 09:11:04 Config A/D Result=40 09:11:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:04 Get A/D filter: -9.255963e+061 result=40 09:11:04 Get A/D value=-858993460 result=40 09:11:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:04 Parameters OK 09:11:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:04 Set A/D data flow result=40 09:11:04 Set A/D channel type result=40 09:11:04 Set A/D encoding result=40 09:11:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:04 Set channel filter=0.000000e+000 result=40 09:11:04 Config A/D Result=40 09:11:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:04 Get A/D filter: -9.255963e+061 result=40 09:11:04 Get A/D value=-858993460 result=40 09:11:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:11:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:11:04 Aux= 09:11:04 Message to Camera, serial 59955 queued 09:11:41 Received message from Master: op=PointingHead serial=59968 09:11:41 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:11:41 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:11:42 Point started: ret=0 09:11:42 point_skyscan result=0 09:11:42 Check angles 09:11:42 SkyScan query 09:11:43 SkyScan query done: ret=0 az=152.79<-10186 ze=8.445<-11437 Statuses=0009 0009 09:11:43 Msec=0 True Az=152.79 Ze=8.445 Az status=0009 Ze status=0009 09:11:43 Check angles 09:11:43 SkyScan query 09:11:44 SkyScan query done: ret=0 az=135.03<-9002 ze=-12.945<-12863 Statuses=0009 0009 09:11:44 Msec=750 True Az=135.03 Ze=-12.945 Az status=0009 Ze status=0009 09:11:44 Check angles 09:11:44 SkyScan query 09:11:44 SkyScan query done: ret=0 az=117.375<-7825 ze=-33.915<-14261 Statuses=0009 0009 09:11:44 Msec=1500 True Az=117.375 Ze=-33.915 Az status=0009 Ze status=0009 09:11:45 Check angles 09:11:45 SkyScan query 09:11:45 SkyScan query done: ret=0 az=100.02<-6668 ze=-51.57<-15438 Statuses=0009 0009 09:11:45 Msec=2250 True Az=100.02 Ze=-51.57 Az status=0009 Ze status=0009 09:11:45 Check angles 09:11:45 SkyScan query 09:11:46 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 09:11:46 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 09:11:46 Check angles 09:11:46 SkyScan query 09:11:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:11:47 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:11:47 Message to Master queued w/err=0: serial=59968 error=0 09:11:52 Received message from Master: op=Filter serial=59969 09:11:52 Color wheel filter change from 0 to 0 09:11:52 FLIGetFilterPos err=0 currentPosition=0 09:11:52 FLIGetStepsRemaining err=0 RemainingSteps=0 09:11:52 Filter is already there-color wheel unchanged 09:11:52 Received message from Master: op=Shutter serial=59970 09:11:52 Shutter LASER close 09:11:52 Received message from Camera: op=State serial=59972 09:11:52 GetSingleValue result=40 Value=cccccccc 09:11:52 SkyScan query 09:11:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:11:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:53 Parameters OK 09:11:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:53 Set A/D data flow result=40 09:11:53 Set A/D channel type result=40 09:11:53 Set A/D encoding result=40 09:11:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:53 Set channel filter=0.000000e+000 result=40 09:11:53 Config A/D Result=40 09:11:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:53 Get A/D filter: -9.255963e+061 result=40 09:11:53 Get A/D value=-858993460 result=40 09:11:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:53 Parameters OK 09:11:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:53 Set A/D data flow result=40 09:11:53 Set A/D channel type result=40 09:11:53 Set A/D encoding result=40 09:11:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:53 Set channel filter=0.000000e+000 result=40 09:11:53 Config A/D Result=40 09:11:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:53 Get A/D filter: -9.255963e+061 result=40 09:11:53 Get A/D value=-858993460 result=40 09:11:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:11:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:11:53 Aux= 09:11:53 Message to Camera, serial 59972 queued 09:12:29 Received message from Master: op=PointingHead serial=59985 09:12:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:12:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:12:30 Point started: ret=0 09:12:30 point_skyscan result=0 09:12:30 Check angles 09:12:30 SkyScan query 09:12:31 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.255<-17417 Statuses=0009 0009 09:12:31 Msec=0 True Az=108.915 Ze=-81.255 Az status=0009 Ze status=0009 09:12:31 Check angles 09:12:31 SkyScan query 09:12:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.195<-18813 Statuses=0008 0009 09:12:32 Msec=750 True Az=112.995 Ze=-102.195 Az status=0008 Ze status=0009 09:12:32 Check angles 09:12:32 SkyScan query 09:12:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.15<-20210 Statuses=0008 0009 09:12:33 Msec=1500 True Az=112.995 Ze=-123.15 Az status=0008 Ze status=0009 09:12:33 Check angles 09:12:33 SkyScan query 09:12:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.105<-21607 Statuses=0008 0009 09:12:33 Msec=2250 True Az=112.995 Ze=-144.105 Az status=0008 Ze status=0009 09:12:33 Check angles 09:12:33 SkyScan query 09:12:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.06<-23004 Statuses=0008 0009 09:12:34 Msec=3000 True Az=112.995 Ze=-165.06 Az status=0008 Ze status=0009 09:12:34 Check angles 09:12:34 SkyScan query 09:12:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:12:35 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:12:35 Message to Master queued w/err=0: serial=59985 error=0 09:12:40 Received message from Master: op=Filter serial=59986 09:12:40 Color wheel filter change from 0 to 0 09:12:40 FLIGetFilterPos err=0 currentPosition=0 09:12:40 FLIGetStepsRemaining err=0 RemainingSteps=0 09:12:40 Filter is already there-color wheel unchanged 09:12:40 Received message from Master: op=Shutter serial=59987 09:12:40 Shutter LASER open 09:12:40 Received message from Camera: op=State serial=59989 09:12:40 GetSingleValue result=40 Value=cccccccc 09:12:40 SkyScan query 09:12:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:12:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:41 Parameters OK 09:12:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:41 Set A/D data flow result=40 09:12:41 Set A/D channel type result=40 09:12:41 Set A/D encoding result=40 09:12:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:41 Set channel filter=0.000000e+000 result=40 09:12:41 Config A/D Result=40 09:12:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:41 Get A/D filter: -9.255963e+061 result=40 09:12:41 Get A/D value=-858993460 result=40 09:12:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:41 Parameters OK 09:12:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:41 Set A/D data flow result=40 09:12:41 Set A/D channel type result=40 09:12:41 Set A/D encoding result=40 09:12:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:41 Set channel filter=0.000000e+000 result=40 09:12:41 Config A/D Result=40 09:12:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:41 Get A/D filter: -9.255963e+061 result=40 09:12:41 Get A/D value=-858993460 result=40 09:12:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:12:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:12:41 Aux= 09:12:41 Message to Camera, serial 59989 queued 09:12:49 Received message from Master: op=Shutter serial=59999 09:12:49 Shutter LASER close 09:12:50 Received message from Master: op=PointingHead serial=60003 09:12:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:12:50 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:12:50 Point started: ret=0 09:12:50 point_skyscan result=0 09:12:51 Check angles 09:12:51 SkyScan query 09:12:51 SkyScan query done: ret=0 az=90.195<-6013 ze=157.545<-1497 Statuses=0009 0009 09:12:51 Msec=0 True Az=90.195 Ze=157.545 Az status=0009 Ze status=0009 09:12:52 Check angles 09:12:52 SkyScan query 09:12:52 SkyScan query done: ret=0 az=72.33<-4822 ze=136.125<-2925 Statuses=0009 0009 09:12:52 Msec=750 True Az=72.33 Ze=136.125 Az status=0009 Ze status=0009 09:12:52 Check angles 09:12:52 SkyScan query 09:12:53 SkyScan query done: ret=0 az=54.99<-3666 ze=115.2<-4320 Statuses=0009 0009 09:12:53 Msec=1500 True Az=54.99 Ze=115.2 Az status=0009 Ze status=0009 09:12:53 Check angles 09:12:53 SkyScan query 09:12:54 SkyScan query done: ret=0 az=40.875<-2725 ze=94.185<-5721 Statuses=0009 0009 09:12:54 Msec=2250 True Az=40.875 Ze=94.185 Az status=0009 Ze status=0009 09:12:54 Check angles 09:12:54 SkyScan query 09:12:54 SkyScan query done: ret=0 az=40.995<-2733 ze=72.81<-7146 Statuses=0008 0009 09:12:54 Msec=3000 True Az=40.995 Ze=72.81 Az status=0008 Ze status=0009 09:12:55 Check angles 09:12:55 SkyScan query 09:12:55 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 09:12:55 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 09:12:55 Check angles 09:12:55 SkyScan query 09:12:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:12:56 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:12:56 Message to Master queued w/err=0: serial=60003 error=0 09:13:01 Received message from Master: op=Filter serial=60004 09:13:01 Color wheel filter change from 0 to 0 09:13:01 FLIGetFilterPos err=0 currentPosition=0 09:13:01 FLIGetStepsRemaining err=0 RemainingSteps=0 09:13:01 Filter is already there-color wheel unchanged 09:13:01 Received message from Master: op=Shutter serial=60005 09:13:01 Shutter LASER close 09:13:01 Received message from Camera: op=State serial=60007 09:13:01 GetSingleValue result=40 Value=cccccccc 09:13:01 SkyScan query 09:13:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:13:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:02 Parameters OK 09:13:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:02 Set A/D data flow result=40 09:13:02 Set A/D channel type result=40 09:13:02 Set A/D encoding result=40 09:13:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:02 Set channel filter=0.000000e+000 result=40 09:13:02 Config A/D Result=40 09:13:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:02 Get A/D filter: -9.255963e+061 result=40 09:13:02 Get A/D value=-858993460 result=40 09:13:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:02 Parameters OK 09:13:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:02 Set A/D data flow result=40 09:13:02 Set A/D channel type result=40 09:13:02 Set A/D encoding result=40 09:13:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:02 Set channel filter=0.000000e+000 result=40 09:13:02 Config A/D Result=40 09:13:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:02 Get A/D filter: -9.255963e+061 result=40 09:13:02 Get A/D value=-858993460 result=40 09:13:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:13:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:13:02 Aux= 09:13:02 Message to Camera, serial 60007 queued 09:13:39 Received message from Master: op=PointingHead serial=60020 09:13:39 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:13:39 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:13:39 Point started: ret=0 09:13:39 point_skyscan result=0 09:13:40 Check angles 09:13:40 SkyScan query 09:13:40 SkyScan query done: ret=0 az=63.975<-4265 ze=66.555<-7563 Statuses=0009 0008 09:13:40 Msec=0 True Az=63.975 Ze=66.555 Az status=0009 Ze status=0008 09:13:40 Check angles 09:13:40 SkyScan query 09:13:41 SkyScan query done: ret=0 az=81.33<-5422 ze=66.495<-7567 Statuses=0009 0008 09:13:41 Msec=750 True Az=81.33 Ze=66.495 Az status=0009 Ze status=0008 09:13:41 Check angles 09:13:41 SkyScan query 09:13:42 SkyScan query done: ret=0 az=98.925<-6595 ze=66.495<-7567 Statuses=0009 0008 09:13:42 Msec=1500 True Az=98.925 Ze=66.495 Az status=0009 Ze status=0008 09:13:42 Check angles 09:13:42 SkyScan query 09:13:43 SkyScan query done: ret=0 az=116.46<-7764 ze=66.495<-7567 Statuses=0009 0008 09:13:43 Msec=2250 True Az=116.46 Ze=66.495 Az status=0009 Ze status=0008 09:13:43 Check angles 09:13:43 SkyScan query 09:13:43 SkyScan query done: ret=0 az=134.025<-8935 ze=66.495<-7567 Statuses=0009 0008 09:13:43 Msec=3000 True Az=134.025 Ze=66.495 Az status=0009 Ze status=0008 09:13:43 Check angles 09:13:43 SkyScan query 09:13:44 SkyScan query done: ret=0 az=151.38<-10092 ze=66.495<-7567 Statuses=0009 0008 09:13:44 Msec=3750 True Az=151.38 Ze=66.495 Az status=0009 Ze status=0008 09:13:44 Check angles 09:13:44 SkyScan query 09:13:45 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 09:13:45 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 09:13:45 Message to Master queued w/err=0: serial=60020 error=0 09:13:50 Received message from Master: op=Filter serial=60021 09:13:50 Color wheel filter change from 0 to 0 09:13:50 FLIGetFilterPos err=0 currentPosition=0 09:13:50 FLIGetStepsRemaining err=0 RemainingSteps=0 09:13:50 Filter is already there-color wheel unchanged 09:13:50 Received message from Master: op=Shutter serial=60022 09:13:50 Shutter LASER close 09:13:50 Received message from Camera: op=State serial=60024 09:13:50 GetSingleValue result=40 Value=cccccccc 09:13:50 SkyScan query 09:13:51 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:13:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:51 Parameters OK 09:13:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:51 Set A/D data flow result=40 09:13:51 Set A/D channel type result=40 09:13:51 Set A/D encoding result=40 09:13:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:51 Set channel filter=0.000000e+000 result=40 09:13:51 Config A/D Result=40 09:13:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:51 Get A/D filter: -9.255963e+061 result=40 09:13:51 Get A/D value=-858993460 result=40 09:13:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:51 Parameters OK 09:13:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:51 Set A/D data flow result=40 09:13:51 Set A/D channel type result=40 09:13:51 Set A/D encoding result=40 09:13:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:51 Set channel filter=0.000000e+000 result=40 09:13:51 Config A/D Result=40 09:13:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:51 Get A/D filter: -9.255963e+061 result=40 09:13:51 Get A/D value=-858993460 result=40 09:13:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:51 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:13:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:13:51 Aux= 09:13:51 Message to Camera, serial 60024 queued 09:14:27 Received message from Master: op=PointingHead serial=60037 09:14:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:14:27 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:14:28 Point started: ret=0 09:14:28 point_skyscan result=0 09:14:28 Check angles 09:14:28 SkyScan query 09:14:29 SkyScan query done: ret=0 az=134.985<-8999 ze=36.69<-9554 Statuses=0009 0009 09:14:29 Msec=0 True Az=134.985 Ze=36.69 Az status=0009 Ze status=0009 09:14:29 Check angles 09:14:29 SkyScan query 09:14:30 SkyScan query done: ret=0 az=117.09<-7806 ze=15.375<-10975 Statuses=0009 0009 09:14:30 Msec=750 True Az=117.09 Ze=15.375 Az status=0009 Ze status=0009 09:14:30 Check angles 09:14:30 SkyScan query 09:14:31 SkyScan query done: ret=0 az=99.435<-6629 ze=-6.06<-12404 Statuses=0009 0009 09:14:31 Msec=1500 True Az=99.435 Ze=-6.06 Az status=0009 Ze status=0009 09:14:31 Check angles 09:14:31 SkyScan query 09:14:31 SkyScan query done: ret=0 az=81.945<-5463 ze=-27.075<-13805 Statuses=0009 0009 09:14:31 Msec=2250 True Az=81.945 Ze=-27.075 Az status=0009 Ze status=0009 09:14:32 Check angles 09:14:32 SkyScan query 09:14:32 SkyScan query done: ret=0 az=64.455<-4297 ze=-38.58<-14572 Statuses=0009 0008 09:14:32 Msec=3000 True Az=64.455 Ze=-38.58 Az status=0009 Ze status=0008 09:14:32 Check angles 09:14:32 SkyScan query 09:14:33 SkyScan query done: ret=0 az=46.965<-3131 ze=-38.52<-14568 Statuses=0009 0008 09:14:33 Msec=3750 True Az=46.965 Ze=-38.52 Az status=0009 Ze status=0008 09:14:33 Check angles 09:14:33 SkyScan query 09:14:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:14:34 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:14:34 Message to Master queued w/err=0: serial=60037 error=0 09:14:39 Received message from Master: op=Filter serial=60038 09:14:39 Color wheel filter change from 0 to 0 09:14:39 FLIGetFilterPos err=0 currentPosition=0 09:14:39 FLIGetStepsRemaining err=0 RemainingSteps=0 09:14:39 Filter is already there-color wheel unchanged 09:14:39 Received message from Master: op=Shutter serial=60039 09:14:39 Shutter LASER close 09:14:39 Received message from Camera: op=State serial=60041 09:14:39 GetSingleValue result=40 Value=cccccccc 09:14:39 SkyScan query 09:14:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:14:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:39 Parameters OK 09:14:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:39 Set A/D data flow result=40 09:14:39 Set A/D channel type result=40 09:14:39 Set A/D encoding result=40 09:14:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:39 Set channel filter=0.000000e+000 result=40 09:14:39 Config A/D Result=40 09:14:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:39 Get A/D filter: -9.255963e+061 result=40 09:14:39 Get A/D value=-858993460 result=40 09:14:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:39 Parameters OK 09:14:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:39 Set A/D data flow result=40 09:14:39 Set A/D channel type result=40 09:14:39 Set A/D encoding result=40 09:14:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:39 Set channel filter=0.000000e+000 result=40 09:14:39 Config A/D Result=40 09:14:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:39 Get A/D filter: -9.255963e+061 result=40 09:14:39 Get A/D value=-858993460 result=40 09:14:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:14:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:14:39 Aux= 09:14:39 Message to Camera, serial 60041 queued 09:15:16 Received message from Master: op=PointingHead serial=60054 09:15:16 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:15:16 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:15:17 Point started: ret=0 09:15:17 point_skyscan result=0 09:15:17 Check angles 09:15:17 SkyScan query 09:15:18 SkyScan query done: ret=0 az=64.44<-4296 ze=-68.595<-16573 Statuses=0009 0009 09:15:18 Msec=0 True Az=64.44 Ze=-68.595 Az status=0009 Ze status=0009 09:15:18 Check angles 09:15:18 SkyScan query 09:15:19 SkyScan query done: ret=0 az=81.81<-5454 ze=-89.55<-17970 Statuses=0009 0009 09:15:19 Msec=750 True Az=81.81 Ze=-89.55 Az status=0009 Ze status=0009 09:15:19 Check angles 09:15:19 SkyScan query 09:15:19 SkyScan query done: ret=0 az=99.42<-6628 ze=-110.505<-19367 Statuses=0009 0009 09:15:19 Msec=1500 True Az=99.42 Ze=-110.505 Az status=0009 Ze status=0009 09:15:20 Check angles 09:15:20 SkyScan query 09:15:20 SkyScan query done: ret=0 az=116.925<-7795 ze=-131.445<-20763 Statuses=0009 0009 09:15:20 Msec=2250 True Az=116.925 Ze=-131.445 Az status=0009 Ze status=0009 09:15:20 Check angles 09:15:20 SkyScan query 09:15:21 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 09:15:21 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 09:15:21 Check angles 09:15:21 SkyScan query 09:15:22 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:15:22 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:15:22 Message to Master queued w/err=0: serial=60054 error=0 09:15:27 Received message from Master: op=Filter serial=60055 09:15:27 Color wheel filter change from 0 to 0 09:15:27 FLIGetFilterPos err=0 currentPosition=0 09:15:27 FLIGetStepsRemaining err=0 RemainingSteps=0 09:15:27 Filter is already there-color wheel unchanged 09:15:27 Received message from Master: op=Shutter serial=60056 09:15:27 Shutter LASER close 09:15:27 Received message from Camera: op=State serial=60058 09:15:27 GetSingleValue result=40 Value=cccccccc 09:15:27 SkyScan query 09:15:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:15:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:27 Parameters OK 09:15:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:27 Set A/D data flow result=40 09:15:27 Set A/D channel type result=40 09:15:27 Set A/D encoding result=40 09:15:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:27 Set channel filter=0.000000e+000 result=40 09:15:27 Config A/D Result=40 09:15:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:27 Get A/D filter: -9.255963e+061 result=40 09:15:27 Get A/D value=-858993460 result=40 09:15:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:27 Parameters OK 09:15:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:27 Set A/D data flow result=40 09:15:27 Set A/D channel type result=40 09:15:27 Set A/D encoding result=40 09:15:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:27 Set channel filter=0.000000e+000 result=40 09:15:27 Config A/D Result=40 09:15:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:27 Get A/D filter: -9.255963e+061 result=40 09:15:27 Get A/D value=-858993460 result=40 09:15:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 [UTC 2018-12-11 09:15:27] 09:15:27 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:15:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:15:28 Aux= 09:15:28 Message to Camera, serial 60058 queued 09:15:29 Received message from Master: op=Identify serial=60059 [UTC 2018-12-11 09:15:54] 09:16:04 Received message from Master: op=PointingHead serial=60074 09:16:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:16:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:16:05 Point started: ret=0 09:16:05 point_skyscan result=0 09:16:05 Check angles 09:16:05 SkyScan query 09:16:06 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.465<-23431 Statuses=0009 0009 09:16:06 Msec=0 True Az=113.01 Ze=-171.465 Az status=0009 Ze status=0009 09:16:06 Check angles 09:16:06 SkyScan query 09:16:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:16:07 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:16:07 Message to Master queued w/err=0: serial=60074 error=0 09:16:12 Received message from Master: op=Filter serial=60075 09:16:12 Color wheel filter change from 0 to 0 09:16:12 FLIGetFilterPos err=0 currentPosition=0 09:16:12 FLIGetStepsRemaining err=0 RemainingSteps=0 09:16:12 Filter is already there-color wheel unchanged 09:16:12 Received message from Master: op=Shutter serial=60076 09:16:12 Shutter LASER open 09:16:12 Received message from Camera: op=State serial=60078 09:16:12 GetSingleValue result=40 Value=cccccccc 09:16:12 SkyScan query 09:16:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:16:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:13 Parameters OK 09:16:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:13 Set A/D data flow result=40 09:16:13 Set A/D channel type result=40 09:16:13 Set A/D encoding result=40 09:16:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:13 Set channel filter=0.000000e+000 result=40 09:16:13 Config A/D Result=40 09:16:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:13 Get A/D filter: -9.255963e+061 result=40 09:16:13 Get A/D value=-858993460 result=40 09:16:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:13 Parameters OK 09:16:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:13 Set A/D data flow result=40 09:16:13 Set A/D channel type result=40 09:16:13 Set A/D encoding result=40 09:16:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:13 Set channel filter=0.000000e+000 result=40 09:16:13 Config A/D Result=40 09:16:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:13 Get A/D filter: -9.255963e+061 result=40 09:16:13 Get A/D value=-858993460 result=40 09:16:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:16:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:16:13 Aux= 09:16:13 Message to Camera, serial 60078 queued 09:16:21 Received message from Master: op=Shutter serial=60088 09:16:21 Shutter LASER close 09:16:22 Received message from Master: op=PointingHead serial=60092 09:16:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:16:22 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:16:22 Point started: ret=0 09:16:22 point_skyscan result=0 09:16:23 Check angles 09:16:23 SkyScan query 09:16:23 SkyScan query done: ret=0 az=136.005<-9067 ze=-143.115<-21541 Statuses=0009 0009 09:16:23 Msec=0 True Az=136.005 Ze=-143.115 Az status=0009 Ze status=0009 09:16:24 Check angles 09:16:24 SkyScan query 09:16:24 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.16<-20144 Statuses=0009 0009 09:16:24 Msec=750 True Az=153.57 Ze=-122.16 Az status=0009 Ze status=0009 09:16:24 Check angles 09:16:24 SkyScan query 09:16:25 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.74<-18716 Statuses=0009 0009 09:16:25 Msec=1500 True Az=171.405 Ze=-100.74 Az status=0009 Ze status=0009 09:16:25 Check angles 09:16:25 SkyScan query 09:16:26 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.86<-17324 Statuses=0008 0009 09:16:26 Msec=2250 True Az=176.025 Ze=-79.86 Az status=0008 Ze status=0009 09:16:26 Check angles 09:16:26 SkyScan query 09:16:26 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.86<-15924 Statuses=0008 0009 09:16:26 Msec=3000 True Az=176.01 Ze=-58.86 Az status=0008 Ze status=0009 09:16:27 Check angles 09:16:27 SkyScan query 09:16:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:16:27 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:16:27 Message to Master queued w/err=0: serial=60092 error=0 09:16:32 Received message from Master: op=Filter serial=60093 09:16:32 Color wheel filter change from 0 to 0 09:16:32 FLIGetFilterPos err=0 currentPosition=0 09:16:32 FLIGetStepsRemaining err=0 RemainingSteps=0 09:16:32 Filter is already there-color wheel unchanged 09:16:32 Received message from Master: op=Shutter serial=60094 09:16:32 Shutter LASER close 09:16:32 Received message from Camera: op=State serial=60096 09:16:32 GetSingleValue result=40 Value=cccccccc 09:16:32 SkyScan query 09:16:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:16:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:33 Parameters OK 09:16:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:33 Set A/D data flow result=40 09:16:33 Set A/D channel type result=40 09:16:33 Set A/D encoding result=40 09:16:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:33 Set channel filter=0.000000e+000 result=40 09:16:33 Config A/D Result=40 09:16:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:33 Get A/D filter: -9.255963e+061 result=40 09:16:33 Get A/D value=-858993460 result=40 09:16:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:33 Parameters OK 09:16:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:33 Set A/D data flow result=40 09:16:33 Set A/D channel type result=40 09:16:33 Set A/D encoding result=40 09:16:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:33 Set channel filter=0.000000e+000 result=40 09:16:33 Config A/D Result=40 09:16:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:33 Get A/D filter: -9.255963e+061 result=40 09:16:33 Get A/D value=-858993460 result=40 09:16:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:16:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:16:33 Aux= 09:16:33 Message to Camera, serial 60096 queued 09:17:10 Received message from Master: op=PointingHead serial=60109 09:17:10 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:17:10 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:17:10 Point started: ret=0 09:17:10 point_skyscan result=0 09:17:11 Check angles 09:17:11 SkyScan query 09:17:12 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.915<-13461 Statuses=0009 0009 09:17:12 Msec=0 True Az=152.985 Ze=-21.915 Az status=0009 Ze status=0009 09:17:12 Check angles 09:17:12 SkyScan query 09:17:12 SkyScan query done: ret=0 az=135.21<-9014 ze=-0.48<-12032 Statuses=0009 0009 09:17:12 Msec=750 True Az=135.21 Ze=-0.48 Az status=0009 Ze status=0009 09:17:13 Check angles 09:17:13 SkyScan query 09:17:13 SkyScan query done: ret=0 az=117.255<-7817 ze=20.94<-10604 Statuses=0009 0009 09:17:13 Msec=1500 True Az=117.255 Ze=20.94 Az status=0009 Ze status=0009 09:17:13 Check angles 09:17:13 SkyScan query 09:17:14 SkyScan query done: ret=0 az=99.885<-6659 ze=41.85<-9210 Statuses=0009 0009 09:17:14 Msec=2250 True Az=99.885 Ze=41.85 Az status=0009 Ze status=0009 09:17:14 Check angles 09:17:14 SkyScan query 09:17:15 SkyScan query done: ret=0 az=86.07<-5738 ze=51.555<-8563 Statuses=0009 0008 09:17:15 Msec=3000 True Az=86.07 Ze=51.555 Az status=0009 Ze status=0008 09:17:15 Check angles 09:17:15 SkyScan query 09:17:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:17:15 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:17:15 Message to Master queued w/err=0: serial=60109 error=0 09:17:20 Received message from Master: op=Filter serial=60110 09:17:20 Color wheel filter change from 0 to 0 09:17:20 FLIGetFilterPos err=0 currentPosition=0 09:17:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:17:20 Filter is already there-color wheel unchanged 09:17:21 Received message from Master: op=Shutter serial=60111 09:17:21 Shutter LASER close 09:17:21 Received message from Camera: op=State serial=60113 09:17:21 GetSingleValue result=40 Value=cccccccc 09:17:21 SkyScan query 09:17:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:17:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:21 Parameters OK 09:17:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:21 Set A/D data flow result=40 09:17:21 Set A/D channel type result=40 09:17:21 Set A/D encoding result=40 09:17:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:21 Set channel filter=0.000000e+000 result=40 09:17:21 Config A/D Result=40 09:17:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:21 Get A/D filter: -9.255963e+061 result=40 09:17:21 Get A/D value=-858993460 result=40 09:17:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:21 Parameters OK 09:17:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:21 Set A/D data flow result=40 09:17:21 Set A/D channel type result=40 09:17:21 Set A/D encoding result=40 09:17:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:21 Set channel filter=0.000000e+000 result=40 09:17:21 Config A/D Result=40 09:17:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:21 Get A/D filter: -9.255963e+061 result=40 09:17:21 Get A/D value=-858993460 result=40 09:17:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:17:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:17:21 Aux= 09:17:21 Message to Camera, serial 60113 queued 09:17:57 Received message from Master: op=PointingHead serial=60125 09:17:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:17:57 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:17:57 Point started: ret=0 09:17:57 point_skyscan result=0 09:17:58 Check angles 09:17:58 SkyScan query 09:17:59 SkyScan query done: ret=0 az=109.26<-7284 ze=38.49<-9434 Statuses=0009 0008 09:17:59 Msec=0 True Az=109.26 Ze=38.49 Az status=0009 Ze status=0008 09:17:59 Check angles 09:17:59 SkyScan query 09:17:59 SkyScan query done: ret=0 az=126.78<-8452 ze=38.505<-9433 Statuses=0009 0008 09:17:59 Msec=750 True Az=126.78 Ze=38.505 Az status=0009 Ze status=0008 09:18:00 Check angles 09:18:00 SkyScan query 09:18:00 SkyScan query done: ret=0 az=144.3<-9620 ze=38.505<-9433 Statuses=0009 0008 09:18:00 Msec=1500 True Az=144.3 Ze=38.505 Az status=0009 Ze status=0008 09:18:00 Check angles 09:18:00 SkyScan query 09:18:01 SkyScan query done: ret=0 az=161.67<-10778 ze=38.505<-9433 Statuses=0009 0008 09:18:01 Msec=2250 True Az=161.67 Ze=38.505 Az status=0009 Ze status=0008 09:18:01 Check angles 09:18:01 SkyScan query 09:18:02 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 09:18:02 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 09:18:02 Check angles 09:18:02 SkyScan query 09:18:02 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:18:02 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:18:02 Message to Master queued w/err=0: serial=60125 error=0 09:18:07 Received message from Master: op=Filter serial=60126 09:18:07 Color wheel filter change from 0 to 0 09:18:07 FLIGetFilterPos err=0 currentPosition=0 09:18:07 FLIGetStepsRemaining err=0 RemainingSteps=0 09:18:07 Filter is already there-color wheel unchanged 09:18:08 Received message from Master: op=Shutter serial=60127 09:18:08 Shutter LASER close 09:18:08 Received message from Camera: op=State serial=60129 09:18:08 GetSingleValue result=40 Value=cccccccc 09:18:08 SkyScan query 09:18:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:18:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:08 Parameters OK 09:18:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:08 Set A/D data flow result=40 09:18:08 Set A/D channel type result=40 09:18:08 Set A/D encoding result=40 09:18:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:08 Set channel filter=0.000000e+000 result=40 09:18:08 Config A/D Result=40 09:18:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:08 Get A/D filter: -9.255963e+061 result=40 09:18:08 Get A/D value=-858993460 result=40 09:18:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:08 Parameters OK 09:18:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:08 Set A/D data flow result=40 09:18:08 Set A/D channel type result=40 09:18:08 Set A/D encoding result=40 09:18:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:08 Set channel filter=0.000000e+000 result=40 09:18:08 Config A/D Result=40 09:18:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:08 Get A/D filter: -9.255963e+061 result=40 09:18:08 Get A/D value=-858993460 result=40 09:18:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:18:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:18:08 Aux= 09:18:08 Message to Camera, serial 60129 queued 09:18:45 Received message from Master: op=PointingHead serial=60142 09:18:45 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:18:45 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:18:45 Point started: ret=0 09:18:45 point_skyscan result=0 09:18:46 Check angles 09:18:46 SkyScan query 09:18:47 SkyScan query done: ret=0 az=152.775<-10185 ze=8.4<-11440 Statuses=0009 0009 09:18:47 Msec=0 True Az=152.775 Ze=8.4 Az status=0009 Ze status=0009 09:18:47 Check angles 09:18:47 SkyScan query 09:18:48 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.525<-12835 Statuses=0009 0009 09:18:48 Msec=750 True Az=135.42 Ze=-12.525 Az status=0009 Ze status=0009 09:18:48 Check angles 09:18:48 SkyScan query 09:18:48 SkyScan query done: ret=0 az=117.735<-7849 ze=-33.465<-14231 Statuses=0009 0009 09:18:48 Msec=1500 True Az=117.735 Ze=-33.465 Az status=0009 Ze status=0009 09:18:48 Check angles 09:18:48 SkyScan query 09:18:49 SkyScan query done: ret=0 az=100.29<-6686 ze=-51.54<-15436 Statuses=0009 0009 09:18:49 Msec=2250 True Az=100.29 Ze=-51.54 Az status=0009 Ze status=0009 09:18:49 Check angles 09:18:49 SkyScan query 09:18:50 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 09:18:50 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 09:18:50 Check angles 09:18:50 SkyScan query 09:18:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:18:51 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:18:51 Message to Master queued w/err=0: serial=60142 error=0 09:18:56 Received message from Master: op=Filter serial=60143 09:18:56 Color wheel filter change from 0 to 0 09:18:56 FLIGetFilterPos err=0 currentPosition=0 09:18:56 FLIGetStepsRemaining err=0 RemainingSteps=0 09:18:56 Filter is already there-color wheel unchanged 09:18:56 Received message from Master: op=Shutter serial=60144 09:18:56 Shutter LASER close 09:18:56 Received message from Camera: op=State serial=60146 09:18:56 GetSingleValue result=40 Value=cccccccc 09:18:56 SkyScan query 09:18:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:18:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:56 Parameters OK 09:18:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:56 Set A/D data flow result=40 09:18:56 Set A/D channel type result=40 09:18:56 Set A/D encoding result=40 09:18:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:56 Set channel filter=0.000000e+000 result=40 09:18:56 Config A/D Result=40 09:18:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:56 Get A/D filter: -9.255963e+061 result=40 09:18:56 Get A/D value=-858993460 result=40 09:18:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:56 Parameters OK 09:18:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:56 Set A/D data flow result=40 09:18:56 Set A/D channel type result=40 09:18:56 Set A/D encoding result=40 09:18:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:56 Set channel filter=0.000000e+000 result=40 09:18:56 Config A/D Result=40 09:18:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:56 Get A/D filter: -9.255963e+061 result=40 09:18:56 Get A/D value=-858993460 result=40 09:18:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:18:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:18:56 Aux= 09:18:56 Message to Camera, serial 60146 queued 09:19:33 Received message from Master: op=PointingHead serial=60159 09:19:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:19:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:19:33 Point started: ret=0 09:19:33 point_skyscan result=0 09:19:34 Check angles 09:19:34 SkyScan query 09:19:35 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.525<-17435 Statuses=0009 0009 09:19:35 Msec=0 True Az=109.2 Ze=-81.525 Az status=0009 Ze status=0009 09:19:35 Check angles 09:19:35 SkyScan query 09:19:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 09:19:36 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 09:19:36 Check angles 09:19:36 SkyScan query 09:19:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.435<-20229 Statuses=0008 0009 09:19:36 Msec=1500 True Az=112.995 Ze=-123.435 Az status=0008 Ze status=0009 09:19:37 Check angles 09:19:37 SkyScan query 09:19:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.39<-21626 Statuses=0008 0009 09:19:37 Msec=2250 True Az=112.995 Ze=-144.39 Az status=0008 Ze status=0009 09:19:37 Check angles 09:19:37 SkyScan query 09:19:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.345<-23023 Statuses=0008 0009 09:19:38 Msec=3000 True Az=112.995 Ze=-165.345 Az status=0008 Ze status=0009 09:19:38 Check angles 09:19:38 SkyScan query 09:19:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:19:39 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:19:39 Message to Master queued w/err=0: serial=60159 error=0 09:19:44 Received message from Master: op=Filter serial=60160 09:19:44 Color wheel filter change from 0 to 0 09:19:44 FLIGetFilterPos err=0 currentPosition=0 09:19:44 FLIGetStepsRemaining err=0 RemainingSteps=0 09:19:44 Filter is already there-color wheel unchanged 09:19:44 Received message from Master: op=Shutter serial=60161 09:19:44 Shutter LASER open 09:19:44 Received message from Camera: op=State serial=60163 09:19:44 GetSingleValue result=40 Value=cccccccc 09:19:44 SkyScan query 09:19:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:19:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:45 Parameters OK 09:19:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:45 Set A/D data flow result=40 09:19:45 Set A/D channel type result=40 09:19:45 Set A/D encoding result=40 09:19:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:45 Set channel filter=0.000000e+000 result=40 09:19:45 Config A/D Result=40 09:19:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:45 Get A/D filter: -9.255963e+061 result=40 09:19:45 Get A/D value=-858993460 result=40 09:19:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:45 Parameters OK 09:19:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:45 Set A/D data flow result=40 09:19:45 Set A/D channel type result=40 09:19:45 Set A/D encoding result=40 09:19:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:45 Set channel filter=0.000000e+000 result=40 09:19:45 Config A/D Result=40 09:19:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:45 Get A/D filter: -9.255963e+061 result=40 09:19:45 Get A/D value=-858993460 result=40 09:19:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:19:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:19:45 Aux= 09:19:45 Message to Camera, serial 60163 queued 09:19:53 Received message from Master: op=Shutter serial=60173 09:19:53 Shutter LASER close 09:19:53 Received message from Master: op=PointingHead serial=60177 09:19:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:19:53 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:19:54 Point started: ret=0 09:19:54 point_skyscan result=0 09:19:54 Check angles 09:19:54 SkyScan query 09:19:55 SkyScan query done: ret=0 az=89.61<-5974 ze=156.885<-1541 Statuses=0009 0009 09:19:55 Msec=0 True Az=89.61 Ze=156.885 Az status=0009 Ze status=0009 09:19:55 Check angles 09:19:55 SkyScan query 09:19:56 SkyScan query done: ret=0 az=72.54<-4836 ze=136.335<-2911 Statuses=0009 0009 09:19:56 Msec=750 True Az=72.54 Ze=136.335 Az status=0009 Ze status=0009 09:19:56 Check angles 09:19:56 SkyScan query 09:19:57 SkyScan query done: ret=0 az=55.125<-3675 ze=115.44<-4304 Statuses=0009 0009 09:19:57 Msec=1500 True Az=55.125 Ze=115.44 Az status=0009 Ze status=0009 09:19:57 Check angles 09:19:57 SkyScan query 09:19:57 SkyScan query done: ret=0 az=40.89<-2726 ze=94.005<-5733 Statuses=0009 0009 09:19:57 Msec=2250 True Az=40.89 Ze=94.005 Az status=0009 Ze status=0009 09:19:58 Check angles 09:19:58 SkyScan query 09:19:58 SkyScan query done: ret=0 az=40.995<-2733 ze=72.6<-7160 Statuses=0008 0009 09:19:58 Msec=3000 True Az=40.995 Ze=72.6 Az status=0008 Ze status=0009 09:19:58 Check angles 09:19:58 SkyScan query 09:19:59 SkyScan query done: ret=0 az=40.995<-2733 ze=52.365<-8509 Statuses=0008 0009 09:19:59 Msec=3750 True Az=40.995 Ze=52.365 Az status=0008 Ze status=0009 09:19:59 Check angles 09:19:59 SkyScan query 09:20:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:20:00 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:20:00 Message to Master queued w/err=0: serial=60177 error=0 09:20:05 Received message from Master: op=Filter serial=60178 09:20:05 Color wheel filter change from 0 to 0 09:20:05 FLIGetFilterPos err=0 currentPosition=0 09:20:05 FLIGetStepsRemaining err=0 RemainingSteps=0 09:20:05 Filter is already there-color wheel unchanged 09:20:05 Received message from Master: op=Shutter serial=60179 09:20:05 Shutter LASER close 09:20:05 Received message from Camera: op=State serial=60181 09:20:05 GetSingleValue result=40 Value=cccccccc 09:20:05 SkyScan query 09:20:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:20:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:06 Parameters OK 09:20:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:06 Set A/D data flow result=40 09:20:06 Set A/D channel type result=40 09:20:06 Set A/D encoding result=40 09:20:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:06 Set channel filter=0.000000e+000 result=40 09:20:06 Config A/D Result=40 09:20:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:06 Get A/D filter: -9.255963e+061 result=40 09:20:06 Get A/D value=-858993460 result=40 09:20:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:06 Parameters OK 09:20:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:06 Set A/D data flow result=40 09:20:06 Set A/D channel type result=40 09:20:06 Set A/D encoding result=40 09:20:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:06 Set channel filter=0.000000e+000 result=40 09:20:06 Config A/D Result=40 09:20:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:06 Get A/D filter: -9.255963e+061 result=40 09:20:06 Get A/D value=-858993460 result=40 09:20:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:20:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:20:06 Aux= 09:20:06 Message to Camera, serial 60181 queued 09:20:42 Received message from Master: op=PointingHead serial=60194 09:20:42 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:20:42 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:20:43 Point started: ret=0 09:20:43 point_skyscan result=0 09:20:44 Check angles 09:20:44 SkyScan query 09:20:44 SkyScan query done: ret=0 az=64.44<-4296 ze=66.555<-7563 Statuses=0009 0008 09:20:44 Msec=0 True Az=64.44 Ze=66.555 Az status=0009 Ze status=0008 09:20:44 Check angles 09:20:44 SkyScan query 09:20:45 SkyScan query done: ret=0 az=82.245<-5483 ze=66.495<-7567 Statuses=0009 0008 09:20:45 Msec=750 True Az=82.245 Ze=66.495 Az status=0009 Ze status=0008 09:20:45 Check angles 09:20:45 SkyScan query 09:20:46 SkyScan query done: ret=0 az=99.75<-6650 ze=66.495<-7567 Statuses=0009 0008 09:20:46 Msec=1500 True Az=99.75 Ze=66.495 Az status=0009 Ze status=0008 09:20:46 Check angles 09:20:46 SkyScan query 09:20:46 SkyScan query done: ret=0 az=117.54<-7836 ze=66.495<-7567 Statuses=0009 0008 09:20:46 Msec=2250 True Az=117.54 Ze=66.495 Az status=0009 Ze status=0008 09:20:47 Check angles 09:20:47 SkyScan query 09:20:47 SkyScan query done: ret=0 az=135.195<-9013 ze=66.495<-7567 Statuses=0009 0008 09:20:47 Msec=3000 True Az=135.195 Ze=66.495 Az status=0009 Ze status=0008 09:20:47 Check angles 09:20:47 SkyScan query 09:20:48 SkyScan query done: ret=0 az=152.805<-10187 ze=66.495<-7567 Statuses=0009 0008 09:20:48 Msec=3750 True Az=152.805 Ze=66.495 Az status=0009 Ze status=0008 09:20:48 Check angles 09:20:48 SkyScan query 09:20:49 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 09:20:49 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 09:20:49 Message to Master queued w/err=0: serial=60194 error=0 09:20:54 Received message from Master: op=Filter serial=60195 09:20:54 Color wheel filter change from 0 to 0 09:20:54 FLIGetFilterPos err=0 currentPosition=0 09:20:54 FLIGetStepsRemaining err=0 RemainingSteps=0 09:20:54 Filter is already there-color wheel unchanged 09:20:54 Received message from Master: op=Shutter serial=60196 09:20:54 Shutter LASER close 09:20:54 Received message from Camera: op=State serial=60198 09:20:54 GetSingleValue result=40 Value=cccccccc 09:20:54 SkyScan query 09:20:54 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:20:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:54 Parameters OK 09:20:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:54 Set A/D data flow result=40 09:20:54 Set A/D channel type result=40 09:20:54 Set A/D encoding result=40 09:20:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:54 Set channel filter=0.000000e+000 result=40 09:20:54 Config A/D Result=40 09:20:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:54 Get A/D filter: -9.255963e+061 result=40 09:20:54 Get A/D value=-858993460 result=40 09:20:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:54 Parameters OK 09:20:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:54 Set A/D data flow result=40 09:20:54 Set A/D channel type result=40 09:20:54 Set A/D encoding result=40 09:20:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:54 Set channel filter=0.000000e+000 result=40 09:20:54 Config A/D Result=40 09:20:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:54 Get A/D filter: -9.255963e+061 result=40 09:20:54 Get A/D value=-858993460 result=40 09:20:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:54 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:20:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:20:54 Aux= 09:20:54 Message to Camera, serial 60198 queued 09:21:31 Received message from Master: op=PointingHead serial=60211 09:21:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:21:31 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:21:32 Point started: ret=0 09:21:32 point_skyscan result=0 09:21:32 Check angles 09:21:32 SkyScan query 09:21:33 SkyScan query done: ret=0 az=134.82<-8988 ze=36.495<-9567 Statuses=0009 0009 09:21:33 Msec=0 True Az=134.82 Ze=36.495 Az status=0009 Ze status=0009 09:21:33 Check angles 09:21:33 SkyScan query 09:21:34 SkyScan query done: ret=0 az=117.27<-7818 ze=15.585<-10961 Statuses=0009 0009 09:21:34 Msec=750 True Az=117.27 Ze=15.585 Az status=0009 Ze status=0009 09:21:34 Check angles 09:21:34 SkyScan query 09:21:35 SkyScan query done: ret=0 az=99.57<-6638 ze=-5.805<-12387 Statuses=0009 0009 09:21:35 Msec=1500 True Az=99.57 Ze=-5.805 Az status=0009 Ze status=0009 09:21:35 Check angles 09:21:35 SkyScan query 09:21:35 SkyScan query done: ret=0 az=82.155<-5477 ze=-26.79<-13786 Statuses=0009 0009 09:21:35 Msec=2250 True Az=82.155 Ze=-26.79 Az status=0009 Ze status=0009 09:21:35 Check angles 09:21:35 SkyScan query 09:21:36 SkyScan query done: ret=0 az=64.59<-4306 ze=-38.565<-14571 Statuses=0009 0008 09:21:36 Msec=3000 True Az=64.59 Ze=-38.565 Az status=0009 Ze status=0008 09:21:36 Check angles 09:21:36 SkyScan query 09:21:37 SkyScan query done: ret=0 az=47.13<-3142 ze=-38.535<-14569 Statuses=0009 0008 09:21:37 Msec=3750 True Az=47.13 Ze=-38.535 Az status=0009 Ze status=0008 09:21:37 Check angles 09:21:37 SkyScan query 09:21:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:21:38 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:21:38 Message to Master queued w/err=0: serial=60211 error=0 09:21:43 Received message from Master: op=Filter serial=60212 09:21:43 Color wheel filter change from 0 to 0 09:21:43 FLIGetFilterPos err=0 currentPosition=0 09:21:43 FLIGetStepsRemaining err=0 RemainingSteps=0 09:21:43 Filter is already there-color wheel unchanged 09:21:43 Received message from Master: op=Shutter serial=60213 09:21:43 Shutter LASER close 09:21:43 Received message from Camera: op=State serial=60215 09:21:43 GetSingleValue result=40 Value=cccccccc 09:21:43 SkyScan query 09:21:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:21:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:43 Parameters OK 09:21:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:43 Set A/D data flow result=40 09:21:43 Set A/D channel type result=40 09:21:43 Set A/D encoding result=40 09:21:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:43 Set channel filter=0.000000e+000 result=40 09:21:43 Config A/D Result=40 09:21:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:43 Get A/D filter: -9.255963e+061 result=40 09:21:43 Get A/D value=-858993460 result=40 09:21:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:43 Parameters OK 09:21:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:43 Set A/D data flow result=40 09:21:43 Set A/D channel type result=40 09:21:43 Set A/D encoding result=40 09:21:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:43 Set channel filter=0.000000e+000 result=40 09:21:43 Config A/D Result=40 09:21:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:43 Get A/D filter: -9.255963e+061 result=40 09:21:43 Get A/D value=-858993460 result=40 09:21:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:21:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:21:43 Aux= 09:21:43 Message to Camera, serial 60215 queued 09:22:20 Received message from Master: op=PointingHead serial=60228 09:22:20 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:22:20 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:22:20 Point started: ret=0 09:22:20 point_skyscan result=0 09:22:21 Check angles 09:22:21 SkyScan query 09:22:22 SkyScan query done: ret=0 az=64.47<-4298 ze=-68.88<-16592 Statuses=0009 0009 09:22:22 Msec=0 True Az=64.47 Ze=-68.88 Az status=0009 Ze status=0009 09:22:22 Check angles 09:22:22 SkyScan query 09:22:23 SkyScan query done: ret=0 az=81.84<-5456 ze=-89.805<-17987 Statuses=0009 0009 09:22:23 Msec=750 True Az=81.84 Ze=-89.805 Az status=0009 Ze status=0009 09:22:23 Check angles 09:22:23 SkyScan query 09:22:23 SkyScan query done: ret=0 az=99.885<-6659 ze=-111.195<-19413 Statuses=0009 0009 09:22:23 Msec=1500 True Az=99.885 Ze=-111.195 Az status=0009 Ze status=0009 09:22:24 Check angles 09:22:24 SkyScan query 09:22:24 SkyScan query done: ret=0 az=117.345<-7823 ze=-132.12<-20808 Statuses=0009 0009 09:22:24 Msec=2250 True Az=117.345 Ze=-132.12 Az status=0009 Ze status=0009 09:22:24 Check angles 09:22:24 SkyScan query 09:22:25 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.555<-21437 Statuses=0009 0008 09:22:25 Msec=3000 True Az=131.1 Ze=-141.555 Az status=0009 Ze status=0008 09:22:25 Check angles 09:22:25 SkyScan query 09:22:26 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 09:22:26 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 09:22:26 Message to Master queued w/err=0: serial=60228 error=0 09:22:31 Received message from Master: op=Filter serial=60229 09:22:31 Color wheel filter change from 0 to 0 09:22:31 FLIGetFilterPos err=0 currentPosition=0 09:22:31 FLIGetStepsRemaining err=0 RemainingSteps=0 09:22:31 Filter is already there-color wheel unchanged 09:22:31 Received message from Master: op=Shutter serial=60230 09:22:31 Shutter LASER close 09:22:31 Received message from Camera: op=State serial=60232 09:22:31 GetSingleValue result=40 Value=cccccccc 09:22:31 SkyScan query 09:22:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:22:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:31 Parameters OK 09:22:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:31 Set A/D data flow result=40 09:22:31 Set A/D channel type result=40 09:22:31 Set A/D encoding result=40 09:22:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:31 Set channel filter=0.000000e+000 result=40 09:22:31 Config A/D Result=40 09:22:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:31 Get A/D filter: -9.255963e+061 result=40 09:22:31 Get A/D value=-858993460 result=40 09:22:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:31 Parameters OK 09:22:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:31 Set A/D data flow result=40 09:22:31 Set A/D channel type result=40 09:22:31 Set A/D encoding result=40 09:22:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:31 Set channel filter=0.000000e+000 result=40 09:22:31 Config A/D Result=40 09:22:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:31 Get A/D filter: -9.255963e+061 result=40 09:22:31 Get A/D value=-858993460 result=40 09:22:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:31 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:22:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:22:31 Aux= 09:22:31 Message to Camera, serial 60232 queued 09:23:07 Received message from Master: op=PointingHead serial=60244 09:23:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:23:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:23:08 Point started: ret=0 09:23:08 point_skyscan result=0 09:23:08 Check angles 09:23:08 SkyScan query 09:23:09 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.03<-23402 Statuses=0009 0009 09:23:09 Msec=0 True Az=113.025 Ze=-171.03 Az status=0009 Ze status=0009 09:23:09 Check angles 09:23:09 SkyScan query 09:23:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:23:10 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:23:10 Message to Master queued w/err=0: serial=60244 error=0 09:23:15 Received message from Master: op=Filter serial=60245 09:23:15 Color wheel filter change from 0 to 0 09:23:15 FLIGetFilterPos err=0 currentPosition=0 09:23:15 FLIGetStepsRemaining err=0 RemainingSteps=0 09:23:15 Filter is already there-color wheel unchanged 09:23:15 Received message from Master: op=Shutter serial=60246 09:23:15 Shutter LASER open 09:23:15 Received message from Camera: op=State serial=60248 09:23:15 GetSingleValue result=40 Value=cccccccc 09:23:15 SkyScan query 09:23:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:23:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:16 Parameters OK 09:23:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:16 Set A/D data flow result=40 09:23:16 Set A/D channel type result=40 09:23:16 Set A/D encoding result=40 09:23:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:16 Set channel filter=0.000000e+000 result=40 09:23:16 Config A/D Result=40 09:23:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:16 Get A/D filter: -9.255963e+061 result=40 09:23:16 Get A/D value=-858993460 result=40 09:23:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:16 Parameters OK 09:23:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:16 Set A/D data flow result=40 09:23:16 Set A/D channel type result=40 09:23:16 Set A/D encoding result=40 09:23:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:16 Set channel filter=0.000000e+000 result=40 09:23:16 Config A/D Result=40 09:23:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:16 Get A/D filter: -9.255963e+061 result=40 09:23:16 Get A/D value=-858993460 result=40 09:23:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:23:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:23:16 Aux= 09:23:16 Message to Camera, serial 60248 queued 09:23:24 Received message from Master: op=Shutter serial=60258 09:23:24 Shutter LASER close 09:23:25 Received message from Master: op=PointingHead serial=60262 09:23:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:23:25 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:23:25 Point started: ret=0 09:23:25 point_skyscan result=0 09:23:26 Check angles 09:23:26 SkyScan query 09:23:26 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.55<-21570 Statuses=0009 0009 09:23:26 Msec=0 True Az=135.705 Ze=-143.55 Az status=0009 Ze status=0009 09:23:27 Check angles 09:23:27 SkyScan query 09:23:27 SkyScan query done: ret=0 az=153.555<-10237 ze=-122.115<-20141 Statuses=0009 0009 09:23:27 Msec=750 True Az=153.555 Ze=-122.115 Az status=0009 Ze status=0009 09:23:27 Check angles 09:23:27 SkyScan query 09:23:28 SkyScan query done: ret=0 az=171<-11400 ze=-101.235<-18749 Statuses=0009 0009 09:23:28 Msec=1500 True Az=171 Ze=-101.235 Az status=0009 Ze status=0009 09:23:28 Check angles 09:23:28 SkyScan query 09:23:29 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.265<-17351 Statuses=0008 0009 09:23:29 Msec=2250 True Az=176.025 Ze=-80.265 Az status=0008 Ze status=0009 09:23:29 Check angles 09:23:29 SkyScan query 09:23:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.295<-15953 Statuses=0008 0009 09:23:29 Msec=3000 True Az=175.995 Ze=-59.295 Az status=0008 Ze status=0009 09:23:30 Check angles 09:23:30 SkyScan query 09:23:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:23:30 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:23:30 Message to Master queued w/err=0: serial=60262 error=0 09:23:35 Received message from Master: op=Filter serial=60263 09:23:35 Color wheel filter change from 0 to 0 09:23:35 FLIGetFilterPos err=0 currentPosition=0 09:23:35 FLIGetStepsRemaining err=0 RemainingSteps=0 09:23:35 Filter is already there-color wheel unchanged 09:23:35 Received message from Master: op=Shutter serial=60264 09:23:35 Shutter LASER close 09:23:35 Received message from Camera: op=State serial=60266 09:23:35 GetSingleValue result=40 Value=cccccccc 09:23:35 SkyScan query 09:23:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:23:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:36 Parameters OK 09:23:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:36 Set A/D data flow result=40 09:23:36 Set A/D channel type result=40 09:23:36 Set A/D encoding result=40 09:23:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:36 Set channel filter=0.000000e+000 result=40 09:23:36 Config A/D Result=40 09:23:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:36 Get A/D filter: -9.255963e+061 result=40 09:23:36 Get A/D value=-858993460 result=40 09:23:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:36 Parameters OK 09:23:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:36 Set A/D data flow result=40 09:23:36 Set A/D channel type result=40 09:23:36 Set A/D encoding result=40 09:23:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:36 Set channel filter=0.000000e+000 result=40 09:23:36 Config A/D Result=40 09:23:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:36 Get A/D filter: -9.255963e+061 result=40 09:23:36 Get A/D value=-858993460 result=40 09:23:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:23:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:23:36 Aux= 09:23:36 Message to Camera, serial 60266 queued 09:24:13 Received message from Master: op=PointingHead serial=60279 09:24:13 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:24:13 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:24:13 Point started: ret=0 09:24:13 point_skyscan result=0 09:24:14 Check angles 09:24:14 SkyScan query 09:24:15 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.765<-13451 Statuses=0009 0009 09:24:15 Msec=0 True Az=152.985 Ze=-21.765 Az status=0009 Ze status=0009 09:24:15 Check angles 09:24:15 SkyScan query 09:24:15 SkyScan query done: ret=0 az=135.48<-9032 ze=-0.765<-12051 Statuses=0009 0009 09:24:15 Msec=750 True Az=135.48 Ze=-0.765 Az status=0009 Ze status=0009 09:24:15 Check angles 09:24:15 SkyScan query 09:24:16 SkyScan query done: ret=0 az=117.54<-7836 ze=20.625<-10625 Statuses=0009 0009 09:24:16 Msec=1500 True Az=117.54 Ze=20.625 Az status=0009 Ze status=0009 09:24:16 Check angles 09:24:16 SkyScan query 09:24:17 SkyScan query done: ret=0 az=100.125<-6675 ze=41.58<-9228 Statuses=0009 0009 09:24:17 Msec=2250 True Az=100.125 Ze=41.58 Az status=0009 Ze status=0009 09:24:17 Check angles 09:24:17 SkyScan query 09:24:18 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 09:24:18 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 09:24:18 Check angles 09:24:18 SkyScan query 09:24:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:24:18 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:24:18 Message to Master queued w/err=0: serial=60279 error=0 09:24:23 Received message from Master: op=Filter serial=60280 09:24:23 Color wheel filter change from 0 to 0 09:24:23 FLIGetFilterPos err=0 currentPosition=0 09:24:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:24:23 Filter is already there-color wheel unchanged 09:24:23 Received message from Master: op=Shutter serial=60281 09:24:23 Shutter LASER close 09:24:24 Received message from Camera: op=State serial=60283 09:24:24 GetSingleValue result=40 Value=cccccccc 09:24:24 SkyScan query 09:24:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:24:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:24 Parameters OK 09:24:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:24 Set A/D data flow result=40 09:24:24 Set A/D channel type result=40 09:24:24 Set A/D encoding result=40 09:24:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:24 Set channel filter=0.000000e+000 result=40 09:24:24 Config A/D Result=40 09:24:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:24 Get A/D filter: -9.255963e+061 result=40 09:24:24 Get A/D value=-858993460 result=40 09:24:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:24 Parameters OK 09:24:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:24 Set A/D data flow result=40 09:24:24 Set A/D channel type result=40 09:24:24 Set A/D encoding result=40 09:24:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:24 Set channel filter=0.000000e+000 result=40 09:24:24 Config A/D Result=40 09:24:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:24 Get A/D filter: -9.255963e+061 result=40 09:24:24 Get A/D value=-858993460 result=40 09:24:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:24:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:24:24 Aux= 09:24:24 Message to Camera, serial 60283 queued 09:25:01 Received message from Master: op=PointingHead serial=60296 09:25:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:25:01 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:25:01 Point started: ret=0 09:25:01 point_skyscan result=0 09:25:02 Check angles 09:25:02 SkyScan query 09:25:03 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 09:25:03 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 09:25:03 Check angles 09:25:03 SkyScan query 09:25:03 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 09:25:03 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 09:25:04 Check angles 09:25:04 SkyScan query 09:25:04 SkyScan query done: ret=0 az=144.105<-9607 ze=38.505<-9433 Statuses=0009 0008 09:25:04 Msec=1500 True Az=144.105 Ze=38.505 Az status=0009 Ze status=0008 09:25:04 Check angles 09:25:04 SkyScan query 09:25:05 SkyScan query done: ret=0 az=161.565<-10771 ze=38.505<-9433 Statuses=0009 0008 09:25:05 Msec=2250 True Az=161.565 Ze=38.505 Az status=0009 Ze status=0008 09:25:05 Check angles 09:25:05 SkyScan query 09:25:06 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 09:25:06 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 09:25:06 Check angles 09:25:06 SkyScan query 09:25:06 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:25:06 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:25:06 Message to Master queued w/err=0: serial=60296 error=0 09:25:11 Received message from Master: op=Filter serial=60297 09:25:11 Color wheel filter change from 0 to 0 09:25:11 FLIGetFilterPos err=0 currentPosition=0 09:25:11 FLIGetStepsRemaining err=0 RemainingSteps=0 09:25:11 Filter is already there-color wheel unchanged 09:25:12 Received message from Master: op=Shutter serial=60298 09:25:12 Shutter LASER close 09:25:12 Received message from Camera: op=State serial=60300 09:25:12 GetSingleValue result=40 Value=cccccccc 09:25:12 SkyScan query 09:25:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:25:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:12 Parameters OK 09:25:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:12 Set A/D data flow result=40 09:25:12 Set A/D channel type result=40 09:25:12 Set A/D encoding result=40 09:25:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:12 Set channel filter=0.000000e+000 result=40 09:25:12 Config A/D Result=40 09:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:12 Get A/D filter: -9.255963e+061 result=40 09:25:12 Get A/D value=-858993460 result=40 09:25:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:12 Parameters OK 09:25:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:12 Set A/D data flow result=40 09:25:12 Set A/D channel type result=40 09:25:12 Set A/D encoding result=40 09:25:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:12 Set channel filter=0.000000e+000 result=40 09:25:12 Config A/D Result=40 09:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:12 Get A/D filter: -9.255963e+061 result=40 09:25:12 Get A/D value=-858993460 result=40 09:25:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:25:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:25:12 Aux= 09:25:12 Message to Camera, serial 60300 queued 09:25:49 Received message from Master: op=PointingHead serial=60313 09:25:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:25:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:25:49 Point started: ret=0 09:25:49 point_skyscan result=0 09:25:50 Check angles 09:25:50 SkyScan query 09:25:51 SkyScan query done: ret=0 az=152.835<-10189 ze=8.64<-11424 Statuses=0009 0009 09:25:51 Msec=0 True Az=152.835 Ze=8.64 Az status=0009 Ze status=0009 09:25:51 Check angles 09:25:51 SkyScan query 09:25:51 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.36<-12824 Statuses=0009 0009 09:25:51 Msec=750 True Az=135.375 Ze=-12.36 Az status=0009 Ze status=0009 09:25:52 Check angles 09:25:52 SkyScan query 09:25:52 SkyScan query done: ret=0 az=117.915<-7861 ze=-33.24<-14216 Statuses=0009 0009 09:25:52 Msec=1500 True Az=117.915 Ze=-33.24 Az status=0009 Ze status=0009 09:25:52 Check angles 09:25:52 SkyScan query [UTC 2018-12-11 09:25:53] 09:25:53 SkyScan query done: ret=0 az=100.395<-6693 ze=-51.54<-15436 Statuses=0009 0009 09:25:53 Msec=2250 True Az=100.395 Ze=-51.54 Az status=0009 Ze status=0009 09:25:53 Check angles 09:25:53 SkyScan query 09:25:54 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.525<-15435 Statuses=0009 0008 09:25:54 Msec=3000 True Az=86.055 Ze=-51.525 Az status=0009 Ze status=0008 09:25:54 Check angles 09:25:54 SkyScan query 09:25:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:25:54 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:25:54 Message to Master queued w/err=0: serial=60313 error=0 09:25:59 Received message from Master: op=Filter serial=60314 09:25:59 Color wheel filter change from 0 to 0 09:25:59 FLIGetFilterPos err=0 currentPosition=0 09:25:59 FLIGetStepsRemaining err=0 RemainingSteps=0 09:25:59 Filter is already there-color wheel unchanged 09:26:00 Received message from Master: op=Shutter serial=60315 09:26:00 Shutter LASER close 09:26:00 Received message from Camera: op=State serial=60317 09:26:00 GetSingleValue result=40 Value=cccccccc 09:26:00 SkyScan query 09:26:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:26:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:00 Parameters OK 09:26:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:00 Set A/D data flow result=40 09:26:00 Set A/D channel type result=40 09:26:00 Set A/D encoding result=40 09:26:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:00 Set channel filter=0.000000e+000 result=40 09:26:00 Config A/D Result=40 09:26:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:00 Get A/D filter: -9.255963e+061 result=40 09:26:00 Get A/D value=-858993460 result=40 09:26:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:00 Parameters OK 09:26:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:00 Set A/D data flow result=40 09:26:00 Set A/D channel type result=40 09:26:00 Set A/D encoding result=40 09:26:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:00 Set channel filter=0.000000e+000 result=40 09:26:00 Config A/D Result=40 09:26:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:00 Get A/D filter: -9.255963e+061 result=40 09:26:00 Get A/D value=-858993460 result=40 09:26:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:26:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:26:00 Aux= 09:26:00 Message to Camera, serial 60317 queued 09:26:37 Received message from Master: op=PointingHead serial=60330 09:26:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:26:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:26:37 Point started: ret=0 09:26:37 point_skyscan result=0 09:26:38 Check angles 09:26:38 SkyScan query 09:26:39 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.525<-17435 Statuses=0009 0009 09:26:39 Msec=0 True Az=109.395 Ze=-81.525 Az status=0009 Ze status=0009 09:26:39 Check angles 09:26:39 SkyScan query 09:26:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.465<-18831 Statuses=0008 0009 09:26:39 Msec=750 True Az=112.995 Ze=-102.465 Az status=0008 Ze status=0009 09:26:40 Check angles 09:26:40 SkyScan query 09:26:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.855<-20257 Statuses=0008 0009 09:26:40 Msec=1500 True Az=112.995 Ze=-123.855 Az status=0008 Ze status=0009 09:26:40 Check angles 09:26:40 SkyScan query 09:26:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.245<-21683 Statuses=0008 0009 09:26:41 Msec=2250 True Az=112.995 Ze=-145.245 Az status=0008 Ze status=0009 09:26:41 Check angles 09:26:41 SkyScan query 09:26:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.665<-23111 Statuses=0008 0009 09:26:42 Msec=3000 True Az=112.995 Ze=-166.665 Az status=0008 Ze status=0009 09:26:42 Check angles 09:26:42 SkyScan query 09:26:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:26:43 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:26:43 Message to Master queued w/err=0: serial=60330 error=0 09:26:48 Received message from Master: op=Filter serial=60331 09:26:48 Color wheel filter change from 0 to 0 09:26:48 FLIGetFilterPos err=0 currentPosition=0 09:26:48 FLIGetStepsRemaining err=0 RemainingSteps=0 09:26:48 Filter is already there-color wheel unchanged 09:26:48 Received message from Master: op=Shutter serial=60332 09:26:48 Shutter LASER open 09:26:48 Received message from Camera: op=State serial=60334 09:26:48 GetSingleValue result=40 Value=cccccccc 09:26:48 SkyScan query 09:26:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:26:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:48 Parameters OK 09:26:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:48 Set A/D data flow result=40 09:26:48 Set A/D channel type result=40 09:26:48 Set A/D encoding result=40 09:26:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:48 Set channel filter=0.000000e+000 result=40 09:26:48 Config A/D Result=40 09:26:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:48 Get A/D filter: -9.255963e+061 result=40 09:26:48 Get A/D value=-858993460 result=40 09:26:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:48 Parameters OK 09:26:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:48 Set A/D data flow result=40 09:26:48 Set A/D channel type result=40 09:26:48 Set A/D encoding result=40 09:26:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:48 Set channel filter=0.000000e+000 result=40 09:26:48 Config A/D Result=40 09:26:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:48 Get A/D filter: -9.255963e+061 result=40 09:26:48 Get A/D value=-858993460 result=40 09:26:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:26:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:26:48 Aux= 09:26:48 Message to Camera, serial 60334 queued 09:26:57 Received message from Master: op=Shutter serial=60344 09:26:57 Shutter LASER close 09:26:57 Received message from Master: op=PointingHead serial=60348 09:26:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:26:57 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:26:58 Point started: ret=0 09:26:58 point_skyscan result=0 09:26:58 Check angles 09:26:58 SkyScan query 09:26:59 SkyScan query done: ret=0 az=89.88<-5992 ze=157.215<-1519 Statuses=0009 0009 09:26:59 Msec=0 True Az=89.88 Ze=157.215 Az status=0009 Ze status=0009 09:26:59 Check angles 09:26:59 SkyScan query 09:27:00 SkyScan query done: ret=0 az=72<-4800 ze=135.81<-2946 Statuses=0009 0009 09:27:00 Msec=750 True Az=72 Ze=135.81 Az status=0009 Ze status=0009 09:27:00 Check angles 09:27:00 SkyScan query 09:27:01 SkyScan query done: ret=0 az=54.375<-3625 ze=114.42<-4372 Statuses=0009 0009 09:27:01 Msec=1500 True Az=54.375 Ze=114.42 Az status=0009 Ze status=0009 09:27:01 Check angles 09:27:01 SkyScan query 09:27:01 SkyScan query done: ret=0 az=40.95<-2730 ze=93.495<-5767 Statuses=0009 0009 09:27:01 Msec=2250 True Az=40.95 Ze=93.495 Az status=0009 Ze status=0009 09:27:02 Check angles 09:27:02 SkyScan query 09:27:02 SkyScan query done: ret=0 az=40.995<-2733 ze=72.075<-7195 Statuses=0008 0009 09:27:02 Msec=3000 True Az=40.995 Ze=72.075 Az status=0008 Ze status=0009 09:27:02 Check angles 09:27:02 SkyScan query 09:27:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.945<-8537 Statuses=0008 0009 09:27:03 Msec=3750 True Az=40.995 Ze=51.945 Az status=0008 Ze status=0009 09:27:03 Check angles 09:27:03 SkyScan query 09:27:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:27:04 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:27:04 Message to Master queued w/err=0: serial=60348 error=0 09:27:09 Received message from Master: op=Filter serial=60349 09:27:09 Color wheel filter change from 0 to 0 09:27:09 FLIGetFilterPos err=0 currentPosition=0 09:27:09 FLIGetStepsRemaining err=0 RemainingSteps=0 09:27:09 Filter is already there-color wheel unchanged 09:27:09 Received message from Master: op=Shutter serial=60350 09:27:09 Shutter LASER close 09:27:09 Received message from Camera: op=State serial=60352 09:27:09 GetSingleValue result=40 Value=cccccccc 09:27:09 SkyScan query 09:27:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:27:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:10 Parameters OK 09:27:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:10 Set A/D data flow result=40 09:27:10 Set A/D channel type result=40 09:27:10 Set A/D encoding result=40 09:27:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:10 Set channel filter=0.000000e+000 result=40 09:27:10 Config A/D Result=40 09:27:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:10 Get A/D filter: -9.255963e+061 result=40 09:27:10 Get A/D value=-858993460 result=40 09:27:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:10 Parameters OK 09:27:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:10 Set A/D data flow result=40 09:27:10 Set A/D channel type result=40 09:27:10 Set A/D encoding result=40 09:27:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:10 Set channel filter=0.000000e+000 result=40 09:27:10 Config A/D Result=40 09:27:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:10 Get A/D filter: -9.255963e+061 result=40 09:27:10 Get A/D value=-858993460 result=40 09:27:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:27:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:27:10 Aux= 09:27:10 Message to Camera, serial 60352 queued 09:27:46 Received message from Master: op=PointingHead serial=60365 09:27:46 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:27:46 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:27:47 Point started: ret=0 09:27:47 point_skyscan result=0 09:27:47 Check angles 09:27:47 SkyScan query 09:27:48 SkyScan query done: ret=0 az=64.425<-4295 ze=66.555<-7563 Statuses=0009 0008 09:27:48 Msec=0 True Az=64.425 Ze=66.555 Az status=0009 Ze status=0008 09:27:48 Check angles 09:27:48 SkyScan query 09:27:49 SkyScan query done: ret=0 az=81.765<-5451 ze=66.495<-7567 Statuses=0009 0008 09:27:49 Msec=750 True Az=81.765 Ze=66.495 Az status=0009 Ze status=0008 09:27:49 Check angles 09:27:49 SkyScan query 09:27:50 SkyScan query done: ret=0 az=99.84<-6656 ze=66.495<-7567 Statuses=0009 0008 09:27:50 Msec=1500 True Az=99.84 Ze=66.495 Az status=0009 Ze status=0008 09:27:50 Check angles 09:27:50 SkyScan query 09:27:50 SkyScan query done: ret=0 az=117.36<-7824 ze=66.495<-7567 Statuses=0009 0008 09:27:50 Msec=2250 True Az=117.36 Ze=66.495 Az status=0009 Ze status=0008 09:27:51 Check angles 09:27:51 SkyScan query 09:27:51 SkyScan query done: ret=0 az=134.76<-8984 ze=66.495<-7567 Statuses=0009 0008 09:27:51 Msec=3000 True Az=134.76 Ze=66.495 Az status=0009 Ze status=0008 09:27:51 Check angles 09:27:51 SkyScan query 09:27:52 SkyScan query done: ret=0 az=152.205<-10147 ze=66.495<-7567 Statuses=0009 0008 09:27:52 Msec=3750 True Az=152.205 Ze=66.495 Az status=0009 Ze status=0008 09:27:52 Check angles 09:27:52 SkyScan query 09:27:53 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:27:53 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 09:27:53 Message to Master queued w/err=0: serial=60365 error=0 09:27:58 Received message from Master: op=Filter serial=60366 09:27:58 Color wheel filter change from 0 to 0 09:27:58 FLIGetFilterPos err=0 currentPosition=0 09:27:58 FLIGetStepsRemaining err=0 RemainingSteps=0 09:27:58 Filter is already there-color wheel unchanged 09:27:58 Received message from Master: op=Shutter serial=60367 09:27:58 Shutter LASER close 09:27:58 Received message from Camera: op=State serial=60369 09:27:58 GetSingleValue result=40 Value=cccccccc 09:27:58 SkyScan query 09:27:58 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:27:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:58 Parameters OK 09:27:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:58 Set A/D data flow result=40 09:27:58 Set A/D channel type result=40 09:27:58 Set A/D encoding result=40 09:27:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:58 Set channel filter=0.000000e+000 result=40 09:27:58 Config A/D Result=40 09:27:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:58 Get A/D filter: -9.255963e+061 result=40 09:27:58 Get A/D value=-858993460 result=40 09:27:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:58 Parameters OK 09:27:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:58 Set A/D data flow result=40 09:27:58 Set A/D channel type result=40 09:27:58 Set A/D encoding result=40 09:27:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:58 Set channel filter=0.000000e+000 result=40 09:27:58 Config A/D Result=40 09:27:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:58 Get A/D filter: -9.255963e+061 result=40 09:27:58 Get A/D value=-858993460 result=40 09:27:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:58 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:27:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:27:58 Aux= 09:27:58 Message to Camera, serial 60369 queued 09:28:35 Received message from Master: op=PointingHead serial=60382 09:28:35 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:28:35 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:28:36 Point started: ret=0 09:28:36 point_skyscan result=0 09:28:36 Check angles 09:28:36 SkyScan query 09:28:37 SkyScan query done: ret=0 az=134.985<-8999 ze=36.675<-9555 Statuses=0009 0009 09:28:37 Msec=0 True Az=134.985 Ze=36.675 Az status=0009 Ze status=0009 09:28:37 Check angles 09:28:37 SkyScan query 09:28:38 SkyScan query done: ret=0 az=117.435<-7829 ze=15.735<-10951 Statuses=0009 0009 09:28:38 Msec=750 True Az=117.435 Ze=15.735 Az status=0009 Ze status=0009 09:28:38 Check angles 09:28:38 SkyScan query 09:28:38 SkyScan query done: ret=0 az=100.125<-6675 ze=-5.25<-12350 Statuses=0009 0009 09:28:38 Msec=1500 True Az=100.125 Ze=-5.25 Az status=0009 Ze status=0009 09:28:39 Check angles 09:28:39 SkyScan query 09:28:39 SkyScan query done: ret=0 az=82.23<-5482 ze=-26.595<-13773 Statuses=0009 0009 09:28:39 Msec=2250 True Az=82.23 Ze=-26.595 Az status=0009 Ze status=0009 09:28:39 Check angles 09:28:39 SkyScan query 09:28:40 SkyScan query done: ret=0 az=64.77<-4318 ze=-38.565<-14571 Statuses=0009 0008 09:28:40 Msec=3000 True Az=64.77 Ze=-38.565 Az status=0009 Ze status=0008 09:28:40 Check angles 09:28:40 SkyScan query 09:28:41 SkyScan query done: ret=0 az=47.295<-3153 ze=-38.535<-14569 Statuses=0009 0008 09:28:41 Msec=3750 True Az=47.295 Ze=-38.535 Az status=0009 Ze status=0008 09:28:41 Check angles 09:28:41 SkyScan query 09:28:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:28:41 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:28:41 Message to Master queued w/err=0: serial=60382 error=0 09:28:46 Received message from Master: op=Filter serial=60383 09:28:46 Color wheel filter change from 0 to 0 09:28:46 FLIGetFilterPos err=0 currentPosition=0 09:28:46 FLIGetStepsRemaining err=0 RemainingSteps=0 09:28:46 Filter is already there-color wheel unchanged 09:28:47 Received message from Master: op=Shutter serial=60384 09:28:47 Shutter LASER close 09:28:47 Received message from Camera: op=State serial=60386 09:28:47 GetSingleValue result=40 Value=cccccccc 09:28:47 SkyScan query 09:28:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:28:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:47 Parameters OK 09:28:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:47 Set A/D data flow result=40 09:28:47 Set A/D channel type result=40 09:28:47 Set A/D encoding result=40 09:28:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:47 Set channel filter=0.000000e+000 result=40 09:28:47 Config A/D Result=40 09:28:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:47 Get A/D filter: -9.255963e+061 result=40 09:28:47 Get A/D value=-858993460 result=40 09:28:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:47 Parameters OK 09:28:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:47 Set A/D data flow result=40 09:28:47 Set A/D channel type result=40 09:28:47 Set A/D encoding result=40 09:28:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:47 Set channel filter=0.000000e+000 result=40 09:28:47 Config A/D Result=40 09:28:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:47 Get A/D filter: -9.255963e+061 result=40 09:28:47 Get A/D value=-858993460 result=40 09:28:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:28:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:28:47 Aux= 09:28:47 Message to Camera, serial 60386 queued 09:29:24 Received message from Master: op=PointingHead serial=60399 09:29:24 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:29:24 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:29:24 Point started: ret=0 09:29:24 point_skyscan result=0 09:29:25 Check angles 09:29:25 SkyScan query 09:29:26 SkyScan query done: ret=0 az=64.065<-4271 ze=-68.07<-16538 Statuses=0009 0009 09:29:26 Msec=0 True Az=64.065 Ze=-68.07 Az status=0009 Ze status=0009 09:29:26 Check angles 09:29:26 SkyScan query 09:29:26 SkyScan query done: ret=0 az=81.78<-5452 ze=-89.475<-17965 Statuses=0009 0009 09:29:26 Msec=750 True Az=81.78 Ze=-89.475 Az status=0009 Ze status=0009 09:29:27 Check angles 09:29:27 SkyScan query 09:29:27 SkyScan query done: ret=0 az=99.795<-6653 ze=-110.88<-19392 Statuses=0009 0009 09:29:27 Msec=1500 True Az=99.795 Ze=-110.88 Az status=0009 Ze status=0009 09:29:27 Check angles 09:29:27 SkyScan query 09:29:28 SkyScan query done: ret=0 az=117.585<-7839 ze=-132.24<-20816 Statuses=0009 0009 09:29:28 Msec=2250 True Az=117.585 Ze=-132.24 Az status=0009 Ze status=0009 09:29:28 Check angles 09:29:28 SkyScan query 09:29:29 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 09:29:29 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 09:29:29 Check angles 09:29:29 SkyScan query 09:29:30 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:29:30 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:29:30 Message to Master queued w/err=0: serial=60399 error=0 09:29:35 Received message from Master: op=Filter serial=60400 09:29:35 Color wheel filter change from 0 to 0 09:29:35 FLIGetFilterPos err=0 currentPosition=0 09:29:35 FLIGetStepsRemaining err=0 RemainingSteps=0 09:29:35 Filter is already there-color wheel unchanged 09:29:35 Received message from Master: op=Shutter serial=60401 09:29:35 Shutter LASER close 09:29:35 Received message from Camera: op=State serial=60403 09:29:35 GetSingleValue result=40 Value=cccccccc 09:29:35 SkyScan query 09:29:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:29:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:35 Parameters OK 09:29:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:35 Set A/D data flow result=40 09:29:35 Set A/D channel type result=40 09:29:35 Set A/D encoding result=40 09:29:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:35 Set channel filter=0.000000e+000 result=40 09:29:35 Config A/D Result=40 09:29:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:35 Get A/D filter: -9.255963e+061 result=40 09:29:35 Get A/D value=-858993460 result=40 09:29:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:35 Parameters OK 09:29:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:35 Set A/D data flow result=40 09:29:35 Set A/D channel type result=40 09:29:35 Set A/D encoding result=40 09:29:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:35 Set channel filter=0.000000e+000 result=40 09:29:35 Config A/D Result=40 09:29:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:35 Get A/D filter: -9.255963e+061 result=40 09:29:35 Get A/D value=-858993460 result=40 09:29:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:29:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:29:35 Aux= 09:29:35 Message to Camera, serial 60403 queued 09:30:12 Received message from Master: op=PointingHead serial=60416 09:30:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:30:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:30:12 Point started: ret=0 09:30:12 point_skyscan result=0 09:30:13 Check angles 09:30:13 SkyScan query 09:30:14 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 09:30:14 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 09:30:14 Check angles 09:30:14 SkyScan query 09:30:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:30:15 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:30:15 Message to Master queued w/err=0: serial=60416 error=0 09:30:20 Received message from Master: op=Filter serial=60417 09:30:20 Color wheel filter change from 0 to 0 09:30:20 FLIGetFilterPos err=0 currentPosition=0 09:30:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:30:20 Filter is already there-color wheel unchanged 09:30:20 Received message from Master: op=Shutter serial=60418 09:30:20 Shutter LASER open 09:30:20 Received message from Camera: op=State serial=60420 09:30:20 GetSingleValue result=40 Value=cccccccc 09:30:20 SkyScan query 09:30:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:30:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:21 Parameters OK 09:30:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:21 Set A/D data flow result=40 09:30:21 Set A/D channel type result=40 09:30:21 Set A/D encoding result=40 09:30:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:21 Set channel filter=0.000000e+000 result=40 09:30:21 Config A/D Result=40 09:30:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:21 Get A/D filter: -9.255963e+061 result=40 09:30:21 Get A/D value=-858993460 result=40 09:30:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:21 Parameters OK 09:30:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:21 Set A/D data flow result=40 09:30:21 Set A/D channel type result=40 09:30:21 Set A/D encoding result=40 09:30:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:21 Set channel filter=0.000000e+000 result=40 09:30:21 Config A/D Result=40 09:30:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:21 Get A/D filter: -9.255963e+061 result=40 09:30:21 Get A/D value=-858993460 result=40 09:30:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:30:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:30:21 Aux= 09:30:21 Message to Camera, serial 60420 queued 09:30:29 Received message from Master: op=Shutter serial=60430 09:30:29 Shutter LASER close 09:30:30 Received message from Master: op=PointingHead serial=60434 09:30:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:30:30 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:30:30 Point started: ret=0 09:30:30 point_skyscan result=0 09:30:31 Check angles 09:30:31 SkyScan query 09:30:31 SkyScan query done: ret=0 az=135.795<-9053 ze=-143.34<-21556 Statuses=0009 0009 09:30:31 Msec=0 True Az=135.795 Ze=-143.34 Az status=0009 Ze status=0009 09:30:31 Check angles 09:30:31 SkyScan query 09:30:32 SkyScan query done: ret=0 az=153.645<-10243 ze=-121.95<-20130 Statuses=0009 0009 09:30:32 Msec=750 True Az=153.645 Ze=-121.95 Az status=0009 Ze status=0009 09:30:32 Check angles 09:30:32 SkyScan query 09:30:33 SkyScan query done: ret=0 az=171.21<-11414 ze=-100.995<-18733 Statuses=0009 0009 09:30:33 Msec=1500 True Az=171.21 Ze=-100.995 Az status=0009 Ze status=0009 09:30:33 Check angles 09:30:33 SkyScan query 09:30:34 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.085<-17339 Statuses=0008 0009 09:30:34 Msec=2250 True Az=176.025 Ze=-80.085 Az status=0008 Ze status=0009 09:30:34 Check angles 09:30:34 SkyScan query 09:30:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.07<-15938 Statuses=0008 0009 09:30:34 Msec=3000 True Az=176.01 Ze=-59.07 Az status=0008 Ze status=0009 09:30:34 Check angles 09:30:34 SkyScan query 09:30:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:30:35 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:30:35 Message to Master queued w/err=0: serial=60434 error=0 09:30:40 Received message from Master: op=Filter serial=60435 09:30:40 Color wheel filter change from 0 to 0 09:30:40 FLIGetFilterPos err=0 currentPosition=0 09:30:40 FLIGetStepsRemaining err=0 RemainingSteps=0 09:30:40 Filter is already there-color wheel unchanged 09:30:40 Received message from Master: op=Shutter serial=60436 09:30:40 Shutter LASER close 09:30:40 Received message from Camera: op=State serial=60438 09:30:40 GetSingleValue result=40 Value=cccccccc 09:30:40 SkyScan query 09:30:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:30:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:41 Parameters OK 09:30:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:41 Set A/D data flow result=40 09:30:41 Set A/D channel type result=40 09:30:41 Set A/D encoding result=40 09:30:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:41 Set channel filter=0.000000e+000 result=40 09:30:41 Config A/D Result=40 09:30:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:41 Get A/D filter: -9.255963e+061 result=40 09:30:41 Get A/D value=-858993460 result=40 09:30:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:41 Parameters OK 09:30:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:41 Set A/D data flow result=40 09:30:41 Set A/D channel type result=40 09:30:41 Set A/D encoding result=40 09:30:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:41 Set channel filter=0.000000e+000 result=40 09:30:41 Config A/D Result=40 09:30:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:41 Get A/D filter: -9.255963e+061 result=40 09:30:41 Get A/D value=-858993460 result=40 09:30:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:30:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:30:41 Aux= 09:30:41 Message to Camera, serial 60438 queued 09:31:18 Received message from Master: op=PointingHead serial=60451 09:31:18 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:31:18 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:31:18 Point started: ret=0 09:31:18 point_skyscan result=0 09:31:19 Check angles 09:31:19 SkyScan query 09:31:19 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.63<-13442 Statuses=0009 0009 09:31:19 Msec=0 True Az=152.925 Ze=-21.63 Az status=0009 Ze status=0009 09:31:20 Check angles 09:31:20 SkyScan query 09:31:20 SkyScan query done: ret=0 az=135.48<-9032 ze=-0.675<-12045 Statuses=0009 0009 09:31:20 Msec=750 True Az=135.48 Ze=-0.675 Az status=0009 Ze status=0009 09:31:20 Check angles 09:31:20 SkyScan query 09:31:21 SkyScan query done: ret=0 az=117.915<-7861 ze=20.25<-10650 Statuses=0009 0009 09:31:21 Msec=1500 True Az=117.915 Ze=20.25 Az status=0009 Ze status=0009 09:31:21 Check angles 09:31:21 SkyScan query 09:31:22 SkyScan query done: ret=0 az=100.365<-6691 ze=41.25<-9250 Statuses=0009 0009 09:31:22 Msec=2250 True Az=100.365 Ze=41.25 Az status=0009 Ze status=0009 09:31:22 Check angles 09:31:22 SkyScan query 09:31:22 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 09:31:22 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 09:31:23 Check angles 09:31:23 SkyScan query 09:31:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:31:23 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:31:23 Message to Master queued w/err=0: serial=60451 error=0 09:31:28 Received message from Master: op=Filter serial=60452 09:31:28 Color wheel filter change from 0 to 0 09:31:28 FLIGetFilterPos err=0 currentPosition=0 09:31:28 FLIGetStepsRemaining err=0 RemainingSteps=0 09:31:28 Filter is already there-color wheel unchanged 09:31:28 Received message from Master: op=Shutter serial=60453 09:31:28 Shutter LASER close 09:31:28 Received message from Camera: op=State serial=60455 09:31:28 GetSingleValue result=40 Value=cccccccc 09:31:28 SkyScan query 09:31:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:31:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:29 Parameters OK 09:31:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:29 Set A/D data flow result=40 09:31:29 Set A/D channel type result=40 09:31:29 Set A/D encoding result=40 09:31:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:29 Set channel filter=0.000000e+000 result=40 09:31:29 Config A/D Result=40 09:31:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:29 Get A/D filter: -9.255963e+061 result=40 09:31:29 Get A/D value=-858993460 result=40 09:31:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:29 Parameters OK 09:31:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:29 Set A/D data flow result=40 09:31:29 Set A/D channel type result=40 09:31:29 Set A/D encoding result=40 09:31:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:29 Set channel filter=0.000000e+000 result=40 09:31:29 Config A/D Result=40 09:31:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:29 Get A/D filter: -9.255963e+061 result=40 09:31:29 Get A/D value=-858993460 result=40 09:31:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:31:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:31:29 Aux= 09:31:29 Message to Camera, serial 60455 queued 09:32:05 Received message from Master: op=PointingHead serial=60467 09:32:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:32:05 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:32:05 Point started: ret=0 09:32:05 point_skyscan result=0 09:32:06 Check angles 09:32:06 SkyScan query 09:32:07 SkyScan query done: ret=0 az=108.84<-7256 ze=38.49<-9434 Statuses=0009 0008 09:32:07 Msec=0 True Az=108.84 Ze=38.49 Az status=0009 Ze status=0008 09:32:07 Check angles 09:32:07 SkyScan query 09:32:07 SkyScan query done: ret=0 az=126.48<-8432 ze=38.505<-9433 Statuses=0009 0008 09:32:07 Msec=750 True Az=126.48 Ze=38.505 Az status=0009 Ze status=0008 09:32:07 Check angles 09:32:07 SkyScan query 09:32:08 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 09:32:08 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 09:32:08 Check angles 09:32:08 SkyScan query 09:32:09 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 09:32:09 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 09:32:09 Check angles 09:32:09 SkyScan query 09:32:10 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:32:10 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:32:10 Check angles 09:32:10 SkyScan query 09:32:10 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:32:10 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:32:10 Message to Master queued w/err=0: serial=60467 error=0 09:32:15 Received message from Master: op=Filter serial=60468 09:32:15 Color wheel filter change from 0 to 0 09:32:15 FLIGetFilterPos err=0 currentPosition=0 09:32:15 FLIGetStepsRemaining err=0 RemainingSteps=0 09:32:15 Filter is already there-color wheel unchanged 09:32:15 Received message from Master: op=Shutter serial=60469 09:32:16 Shutter LASER close 09:32:16 Received message from Camera: op=State serial=60471 09:32:16 GetSingleValue result=40 Value=cccccccc 09:32:16 SkyScan query 09:32:16 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:32:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:16 Parameters OK 09:32:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:16 Set A/D data flow result=40 09:32:16 Set A/D channel type result=40 09:32:16 Set A/D encoding result=40 09:32:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:16 Set channel filter=0.000000e+000 result=40 09:32:16 Config A/D Result=40 09:32:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:16 Get A/D filter: -9.255963e+061 result=40 09:32:16 Get A/D value=-858993460 result=40 09:32:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:16 Parameters OK 09:32:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:16 Set A/D data flow result=40 09:32:16 Set A/D channel type result=40 09:32:16 Set A/D encoding result=40 09:32:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:16 Set channel filter=0.000000e+000 result=40 09:32:16 Config A/D Result=40 09:32:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:16 Get A/D filter: -9.255963e+061 result=40 09:32:16 Get A/D value=-858993460 result=40 09:32:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:32:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:32:16 Aux= 09:32:16 Message to Camera, serial 60471 queued 09:32:53 Received message from Master: op=PointingHead serial=60484 09:32:53 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:32:53 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:32:53 Point started: ret=0 09:32:53 point_skyscan result=0 09:32:54 Check angles 09:32:54 SkyScan query 09:32:55 SkyScan query done: ret=0 az=152.88<-10192 ze=8.685<-11421 Statuses=0009 0009 09:32:55 Msec=0 True Az=152.88 Ze=8.685 Az status=0009 Ze status=0009 09:32:55 Check angles 09:32:55 SkyScan query 09:32:55 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.33<-12822 Statuses=0009 0009 09:32:55 Msec=750 True Az=135.42 Ze=-12.33 Az status=0009 Ze status=0009 09:32:56 Check angles 09:32:56 SkyScan query 09:32:56 SkyScan query done: ret=0 az=117.48<-7832 ze=-33.66<-14244 Statuses=0009 0009 09:32:56 Msec=1500 True Az=117.48 Ze=-33.66 Az status=0009 Ze status=0009 09:32:56 Check angles 09:32:56 SkyScan query 09:32:57 SkyScan query done: ret=0 az=100.08<-6672 ze=-51.555<-15437 Statuses=0009 0009 09:32:57 Msec=2250 True Az=100.08 Ze=-51.555 Az status=0009 Ze status=0009 09:32:57 Check angles 09:32:57 SkyScan query 09:32:58 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 09:32:58 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 09:32:58 Check angles 09:32:58 SkyScan query 09:32:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:32:58 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:32:58 Message to Master queued w/err=0: serial=60484 error=0 09:33:03 Received message from Master: op=Filter serial=60485 09:33:03 Color wheel filter change from 0 to 0 09:33:03 FLIGetFilterPos err=0 currentPosition=0 09:33:03 FLIGetStepsRemaining err=0 RemainingSteps=0 09:33:03 Filter is already there-color wheel unchanged 09:33:04 Received message from Master: op=Shutter serial=60486 09:33:04 Shutter LASER close 09:33:04 Received message from Camera: op=State serial=60488 09:33:04 GetSingleValue result=40 Value=cccccccc 09:33:04 SkyScan query 09:33:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:33:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:04 Parameters OK 09:33:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:04 Set A/D data flow result=40 09:33:04 Set A/D channel type result=40 09:33:04 Set A/D encoding result=40 09:33:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:04 Set channel filter=0.000000e+000 result=40 09:33:04 Config A/D Result=40 09:33:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:04 Get A/D filter: -9.255963e+061 result=40 09:33:04 Get A/D value=-858993460 result=40 09:33:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:04 Parameters OK 09:33:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:04 Set A/D data flow result=40 09:33:04 Set A/D channel type result=40 09:33:04 Set A/D encoding result=40 09:33:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:04 Set channel filter=0.000000e+000 result=40 09:33:04 Config A/D Result=40 09:33:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:04 Get A/D filter: -9.255963e+061 result=40 09:33:04 Get A/D value=-858993460 result=40 09:33:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:04 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:33:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:33:04 Aux= 09:33:04 Message to Camera, serial 60488 queued 09:33:41 Received message from Master: op=PointingHead serial=60501 09:33:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:33:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:33:41 Point started: ret=0 09:33:41 point_skyscan result=0 09:33:42 Check angles 09:33:42 SkyScan query 09:33:43 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.33<-17422 Statuses=0009 0009 09:33:43 Msec=0 True Az=109.2 Ze=-81.33 Az status=0009 Ze status=0009 09:33:43 Check angles 09:33:43 SkyScan query 09:33:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.27<-18818 Statuses=0008 0009 09:33:43 Msec=750 True Az=112.995 Ze=-102.27 Az status=0008 Ze status=0009 09:33:44 Check angles 09:33:44 SkyScan query 09:33:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.21<-20214 Statuses=0008 0009 09:33:44 Msec=1500 True Az=112.995 Ze=-123.21 Az status=0008 Ze status=0009 09:33:44 Check angles 09:33:44 SkyScan query 09:33:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.645<-21643 Statuses=0008 0009 09:33:45 Msec=2250 True Az=112.995 Ze=-144.645 Az status=0008 Ze status=0009 09:33:45 Check angles 09:33:45 SkyScan query 09:33:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.585<-23039 Statuses=0008 0009 09:33:46 Msec=3000 True Az=112.995 Ze=-165.585 Az status=0008 Ze status=0009 09:33:46 Check angles 09:33:46 SkyScan query 09:33:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:33:46 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:33:46 Message to Master queued w/err=0: serial=60501 error=0 09:33:51 Received message from Master: op=Filter serial=60502 09:33:51 Color wheel filter change from 0 to 0 09:33:51 FLIGetFilterPos err=0 currentPosition=0 09:33:51 FLIGetStepsRemaining err=0 RemainingSteps=0 09:33:51 Filter is already there-color wheel unchanged 09:33:52 Received message from Master: op=Shutter serial=60503 09:33:52 Shutter LASER open 09:33:52 Received message from Camera: op=State serial=60505 09:33:52 GetSingleValue result=40 Value=cccccccc 09:33:52 SkyScan query 09:33:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:33:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:52 Parameters OK 09:33:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:52 Set A/D data flow result=40 09:33:52 Set A/D channel type result=40 09:33:52 Set A/D encoding result=40 09:33:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:52 Set channel filter=0.000000e+000 result=40 09:33:52 Config A/D Result=40 09:33:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:52 Get A/D filter: -9.255963e+061 result=40 09:33:52 Get A/D value=-858993460 result=40 09:33:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:52 Parameters OK 09:33:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:52 Set A/D data flow result=40 09:33:52 Set A/D channel type result=40 09:33:52 Set A/D encoding result=40 09:33:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:52 Set channel filter=0.000000e+000 result=40 09:33:52 Config A/D Result=40 09:33:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:52 Get A/D filter: -9.255963e+061 result=40 09:33:52 Get A/D value=-858993460 result=40 09:33:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:33:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:33:52 Aux= 09:33:52 Message to Camera, serial 60505 queued 09:34:01 Received message from Master: op=Shutter serial=60515 09:34:01 Shutter LASER close 09:34:01 Received message from Master: op=PointingHead serial=60519 09:34:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:34:01 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:34:02 Point started: ret=0 09:34:02 point_skyscan result=0 09:34:02 Check angles 09:34:02 SkyScan query 09:34:03 SkyScan query done: ret=0 az=89.685<-5979 ze=157.05<-1530 Statuses=0009 0009 09:34:03 Msec=0 True Az=89.685 Ze=157.05 Az status=0009 Ze status=0009 09:34:03 Check angles 09:34:03 SkyScan query 09:34:04 SkyScan query done: ret=0 az=71.835<-4789 ze=135.675<-2955 Statuses=0009 0009 09:34:04 Msec=750 True Az=71.835 Ze=135.675 Az status=0009 Ze status=0009 09:34:04 Check angles 09:34:04 SkyScan query 09:34:04 SkyScan query done: ret=0 az=54.66<-3644 ze=114.675<-4355 Statuses=0009 0009 09:34:04 Msec=1500 True Az=54.66 Ze=114.675 Az status=0009 Ze status=0009 09:34:05 Check angles 09:34:05 SkyScan query 09:34:05 SkyScan query done: ret=0 az=40.92<-2728 ze=93.765<-5749 Statuses=0009 0009 09:34:05 Msec=2250 True Az=40.92 Ze=93.765 Az status=0009 Ze status=0009 09:34:05 Check angles 09:34:05 SkyScan query 09:34:06 SkyScan query done: ret=0 az=40.995<-2733 ze=72.78<-7148 Statuses=0008 0009 09:34:06 Msec=3000 True Az=40.995 Ze=72.78 Az status=0008 Ze status=0009 09:34:06 Check angles 09:34:06 SkyScan query 09:34:07 SkyScan query done: ret=0 az=40.995<-2733 ze=52.455<-8503 Statuses=0008 0009 09:34:07 Msec=3750 True Az=40.995 Ze=52.455 Az status=0008 Ze status=0009 09:34:07 Check angles 09:34:07 SkyScan query 09:34:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:34:07 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:34:07 Message to Master queued w/err=0: serial=60519 error=0 09:34:12 Received message from Master: op=Filter serial=60520 09:34:12 Color wheel filter change from 0 to 0 09:34:12 FLIGetFilterPos err=0 currentPosition=0 09:34:12 FLIGetStepsRemaining err=0 RemainingSteps=0 09:34:12 Filter is already there-color wheel unchanged 09:34:13 Received message from Master: op=Shutter serial=60521 09:34:13 Shutter LASER close 09:34:13 Received message from Camera: op=State serial=60523 09:34:13 GetSingleValue result=40 Value=cccccccc 09:34:13 SkyScan query 09:34:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:34:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:13 Parameters OK 09:34:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:13 Set A/D data flow result=40 09:34:13 Set A/D channel type result=40 09:34:13 Set A/D encoding result=40 09:34:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:13 Set channel filter=0.000000e+000 result=40 09:34:13 Config A/D Result=40 09:34:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:13 Get A/D filter: -9.255963e+061 result=40 09:34:13 Get A/D value=-858993460 result=40 09:34:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:13 Parameters OK 09:34:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:13 Set A/D data flow result=40 09:34:13 Set A/D channel type result=40 09:34:13 Set A/D encoding result=40 09:34:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:13 Set channel filter=0.000000e+000 result=40 09:34:13 Config A/D Result=40 09:34:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:13 Get A/D filter: -9.255963e+061 result=40 09:34:13 Get A/D value=-858993460 result=40 09:34:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:34:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:34:13 Aux= 09:34:13 Message to Camera, serial 60523 queued 09:34:50 Received message from Master: op=PointingHead serial=60536 09:34:50 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:34:50 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:34:51 Point started: ret=0 09:34:51 point_skyscan result=0 09:34:51 Check angles 09:34:51 SkyScan query 09:34:52 SkyScan query done: ret=0 az=63.81<-4254 ze=66.555<-7563 Statuses=0009 0008 09:34:52 Msec=0 True Az=63.81 Ze=66.555 Az status=0009 Ze status=0008 09:34:52 Check angles 09:34:52 SkyScan query 09:34:53 SkyScan query done: ret=0 az=81.105<-5407 ze=66.51<-7566 Statuses=0009 0008 09:34:53 Msec=750 True Az=81.105 Ze=66.51 Az status=0009 Ze status=0008 09:34:53 Check angles 09:34:53 SkyScan query 09:34:53 SkyScan query done: ret=0 az=98.685<-6579 ze=66.495<-7567 Statuses=0009 0008 09:34:53 Msec=1500 True Az=98.685 Ze=66.495 Az status=0009 Ze status=0008 09:34:54 Check angles 09:34:54 SkyScan query 09:34:54 SkyScan query done: ret=0 az=116.22<-7748 ze=66.495<-7567 Statuses=0009 0008 09:34:54 Msec=2250 True Az=116.22 Ze=66.495 Az status=0009 Ze status=0008 09:34:54 Check angles 09:34:54 SkyScan query 09:34:55 SkyScan query done: ret=0 az=133.83<-8922 ze=66.495<-7567 Statuses=0009 0008 09:34:55 Msec=3000 True Az=133.83 Ze=66.495 Az status=0009 Ze status=0008 09:34:55 Check angles 09:34:55 SkyScan query 09:34:56 SkyScan query done: ret=0 az=151.155<-10077 ze=66.495<-7567 Statuses=0009 0008 09:34:56 Msec=3750 True Az=151.155 Ze=66.495 Az status=0009 Ze status=0008 09:34:56 Check angles 09:34:56 SkyScan query 09:34:56 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:34:56 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 09:34:56 Message to Master queued w/err=0: serial=60536 error=0 09:35:01 Received message from Master: op=Filter serial=60537 09:35:01 Color wheel filter change from 0 to 0 09:35:01 FLIGetFilterPos err=0 currentPosition=0 09:35:01 FLIGetStepsRemaining err=0 RemainingSteps=0 09:35:01 Filter is already there-color wheel unchanged 09:35:02 Received message from Master: op=Shutter serial=60538 09:35:02 Shutter LASER close 09:35:02 Received message from Camera: op=State serial=60540 09:35:02 GetSingleValue result=40 Value=cccccccc 09:35:02 SkyScan query 09:35:02 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:35:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:02 Parameters OK 09:35:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:02 Set A/D data flow result=40 09:35:02 Set A/D channel type result=40 09:35:02 Set A/D encoding result=40 09:35:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:02 Set channel filter=0.000000e+000 result=40 09:35:02 Config A/D Result=40 09:35:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:02 Get A/D filter: -9.255963e+061 result=40 09:35:02 Get A/D value=-858993460 result=40 09:35:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:02 Parameters OK 09:35:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:02 Set A/D data flow result=40 09:35:02 Set A/D channel type result=40 09:35:02 Set A/D encoding result=40 09:35:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:02 Set channel filter=0.000000e+000 result=40 09:35:02 Config A/D Result=40 09:35:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:02 Get A/D filter: -9.255963e+061 result=40 09:35:02 Get A/D value=-858993460 result=40 09:35:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:02 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:35:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:35:02 Aux= 09:35:02 Message to Camera, serial 60540 queued 09:35:39 Received message from Master: op=PointingHead serial=60553 09:35:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:35:39 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:35:39 Point started: ret=0 09:35:39 point_skyscan result=0 09:35:40 Check angles 09:35:40 SkyScan query 09:35:41 SkyScan query done: ret=0 az=134.775<-8985 ze=36.48<-9568 Statuses=0009 0009 09:35:41 Msec=0 True Az=134.775 Ze=36.48 Az status=0009 Ze status=0009 09:35:41 Check angles 09:35:41 SkyScan query 09:35:42 SkyScan query done: ret=0 az=117.24<-7816 ze=15.57<-10962 Statuses=0009 0009 09:35:42 Msec=750 True Az=117.24 Ze=15.57 Az status=0009 Ze status=0009 09:35:42 Check angles [UTC 2018-12-11 09:35:42] 09:35:42 SkyScan query 09:35:42 SkyScan query done: ret=0 az=98.31<-6554 ze=-7.245<-12483 Statuses=0009 0009 09:35:42 Msec=1500 True Az=98.31 Ze=-7.245 Az status=0009 Ze status=0009 09:35:42 Check angles 09:35:42 SkyScan query 09:35:43 SkyScan query done: ret=0 az=82.335<-5489 ze=-26.355<-13757 Statuses=0009 0009 09:35:43 Msec=2250 True Az=82.335 Ze=-26.355 Az status=0009 Ze status=0009 09:35:43 Check angles 09:35:43 SkyScan query 09:35:44 SkyScan query done: ret=0 az=64.935<-4329 ze=-38.565<-14571 Statuses=0009 0008 09:35:44 Msec=3000 True Az=64.935 Ze=-38.565 Az status=0009 Ze status=0008 09:35:44 Check angles 09:35:44 SkyScan query 09:35:45 SkyScan query done: ret=0 az=47.46<-3164 ze=-38.535<-14569 Statuses=0009 0008 09:35:45 Msec=3750 True Az=47.46 Ze=-38.535 Az status=0009 Ze status=0008 09:35:45 Check angles 09:35:45 SkyScan query 09:35:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:35:45 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:35:45 Message to Master queued w/err=0: serial=60553 error=0 09:35:50 Received message from Master: op=Filter serial=60554 09:35:50 Color wheel filter change from 0 to 0 09:35:50 FLIGetFilterPos err=0 currentPosition=0 09:35:50 FLIGetStepsRemaining err=0 RemainingSteps=0 09:35:50 Filter is already there-color wheel unchanged 09:35:50 Received message from Master: op=Shutter serial=60555 09:35:50 Shutter LASER close 09:35:50 Received message from Camera: op=State serial=60557 09:35:50 GetSingleValue result=40 Value=cccccccc 09:35:50 SkyScan query 09:35:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:35:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:51 Parameters OK 09:35:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:51 Set A/D data flow result=40 09:35:51 Set A/D channel type result=40 09:35:51 Set A/D encoding result=40 09:35:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:51 Set channel filter=0.000000e+000 result=40 09:35:51 Config A/D Result=40 09:35:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:51 Get A/D filter: -9.255963e+061 result=40 09:35:51 Get A/D value=-858993460 result=40 09:35:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:51 Parameters OK 09:35:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:51 Set A/D data flow result=40 09:35:51 Set A/D channel type result=40 09:35:51 Set A/D encoding result=40 09:35:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:51 Set channel filter=0.000000e+000 result=40 09:35:51 Config A/D Result=40 09:35:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:51 Get A/D filter: -9.255963e+061 result=40 09:35:51 Get A/D value=-858993460 result=40 09:35:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:35:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:35:51 Aux= 09:35:51 Message to Camera, serial 60557 queued [UTC 2018-12-11 09:35:54] 09:36:28 Received message from Master: op=PointingHead serial=60570 09:36:28 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:36:28 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:36:28 Point started: ret=0 09:36:28 point_skyscan result=0 09:36:29 Check angles 09:36:29 SkyScan query 09:36:30 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.325<-16555 Statuses=0009 0009 09:36:30 Msec=0 True Az=64.005 Ze=-68.325 Az status=0009 Ze status=0009 09:36:30 Check angles 09:36:30 SkyScan query 09:36:30 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.295<-17953 Statuses=0009 0009 09:36:30 Msec=750 True Az=81.36 Ze=-89.295 Az status=0009 Ze status=0009 09:36:31 Check angles 09:36:31 SkyScan query 09:36:31 SkyScan query done: ret=0 az=99.42<-6628 ze=-110.7<-19380 Statuses=0009 0009 09:36:31 Msec=1500 True Az=99.42 Ze=-110.7 Az status=0009 Ze status=0009 09:36:31 Check angles 09:36:31 SkyScan query 09:36:32 SkyScan query done: ret=0 az=116.925<-7795 ze=-131.625<-20775 Statuses=0009 0009 09:36:32 Msec=2250 True Az=116.925 Ze=-131.625 Az status=0009 Ze status=0009 09:36:32 Check angles 09:36:32 SkyScan query 09:36:33 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.555<-21437 Statuses=0009 0008 09:36:33 Msec=3000 True Az=131.1 Ze=-141.555 Az status=0009 Ze status=0008 09:36:33 Check angles 09:36:33 SkyScan query 09:36:33 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:36:33 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:36:33 Message to Master queued w/err=0: serial=60570 error=0 09:36:38 Received message from Master: op=Filter serial=60571 09:36:38 Color wheel filter change from 0 to 0 09:36:38 FLIGetFilterPos err=0 currentPosition=0 09:36:38 FLIGetStepsRemaining err=0 RemainingSteps=0 09:36:38 Filter is already there-color wheel unchanged 09:36:39 Received message from Master: op=Shutter serial=60572 09:36:39 Shutter LASER close 09:36:39 Received message from Camera: op=State serial=60574 09:36:39 GetSingleValue result=40 Value=cccccccc 09:36:39 SkyScan query 09:36:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:36:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:39 Parameters OK 09:36:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:39 Set A/D data flow result=40 09:36:39 Set A/D channel type result=40 09:36:39 Set A/D encoding result=40 09:36:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:39 Set channel filter=0.000000e+000 result=40 09:36:39 Config A/D Result=40 09:36:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:39 Get A/D filter: -9.255963e+061 result=40 09:36:39 Get A/D value=-858993460 result=40 09:36:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:39 Parameters OK 09:36:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:39 Set A/D data flow result=40 09:36:39 Set A/D channel type result=40 09:36:39 Set A/D encoding result=40 09:36:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:39 Set channel filter=0.000000e+000 result=40 09:36:39 Config A/D Result=40 09:36:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:39 Get A/D filter: -9.255963e+061 result=40 09:36:39 Get A/D value=-858993460 result=40 09:36:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:39 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:36:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:36:39 Aux= 09:36:39 Message to Camera, serial 60574 queued 09:37:15 Received message from Master: op=PointingHead serial=60586 09:37:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:37:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:37:15 Point started: ret=0 09:37:15 point_skyscan result=0 09:37:16 Check angles 09:37:16 SkyScan query 09:37:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.525<-23435 Statuses=0009 0009 09:37:17 Msec=0 True Az=112.995 Ze=-171.525 Az status=0009 Ze status=0009 09:37:17 Check angles 09:37:17 SkyScan query 09:37:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:37:18 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:37:18 Message to Master queued w/err=0: serial=60586 error=0 09:37:23 Received message from Master: op=Filter serial=60587 09:37:23 Color wheel filter change from 0 to 0 09:37:23 FLIGetFilterPos err=0 currentPosition=0 09:37:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:37:23 Filter is already there-color wheel unchanged 09:37:23 Received message from Master: op=Shutter serial=60588 09:37:23 Shutter LASER open 09:37:23 Received message from Camera: op=State serial=60590 09:37:23 GetSingleValue result=40 Value=cccccccc 09:37:23 SkyScan query 09:37:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:37:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:24 Parameters OK 09:37:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:24 Set A/D data flow result=40 09:37:24 Set A/D channel type result=40 09:37:24 Set A/D encoding result=40 09:37:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:24 Set channel filter=0.000000e+000 result=40 09:37:24 Config A/D Result=40 09:37:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:24 Get A/D filter: -9.255963e+061 result=40 09:37:24 Get A/D value=-858993460 result=40 09:37:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:24 Parameters OK 09:37:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:24 Set A/D data flow result=40 09:37:24 Set A/D channel type result=40 09:37:24 Set A/D encoding result=40 09:37:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:24 Set channel filter=0.000000e+000 result=40 09:37:24 Config A/D Result=40 09:37:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:24 Get A/D filter: -9.255963e+061 result=40 09:37:24 Get A/D value=-858993460 result=40 09:37:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:37:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:37:24 Aux= 09:37:24 Message to Camera, serial 60590 queued 09:37:32 Received message from Master: op=Shutter serial=60600 09:37:32 Shutter LASER close 09:37:33 Received message from Master: op=PointingHead serial=60604 09:37:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:37:33 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:37:33 Point started: ret=0 09:37:33 point_skyscan result=0 09:37:34 Check angles 09:37:34 SkyScan query 09:37:34 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.25<-21550 Statuses=0009 0009 09:37:34 Msec=0 True Az=135.96 Ze=-143.25 Az status=0009 Ze status=0009 09:37:34 Check angles 09:37:34 SkyScan query 09:37:35 SkyScan query done: ret=0 az=153.84<-10256 ze=-121.815<-20121 Statuses=0009 0009 09:37:35 Msec=750 True Az=153.84 Ze=-121.815 Az status=0009 Ze status=0009 09:37:35 Check angles 09:37:35 SkyScan query 09:37:36 SkyScan query done: ret=0 az=171.69<-11446 ze=-100.38<-18692 Statuses=0009 0009 09:37:36 Msec=1500 True Az=171.69 Ze=-100.38 Az status=0009 Ze status=0009 09:37:36 Check angles 09:37:36 SkyScan query 09:37:37 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.47<-17298 Statuses=0008 0009 09:37:37 Msec=2250 True Az=176.025 Ze=-79.47 Az status=0008 Ze status=0009 09:37:37 Check angles 09:37:37 SkyScan query 09:37:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.47<-15898 Statuses=0008 0009 09:37:37 Msec=3000 True Az=176.01 Ze=-58.47 Az status=0008 Ze status=0009 09:37:37 Check angles 09:37:37 SkyScan query 09:37:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:37:38 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:37:38 Message to Master queued w/err=0: serial=60604 error=0 09:37:43 Received message from Master: op=Filter serial=60605 09:37:43 Color wheel filter change from 0 to 0 09:37:43 FLIGetFilterPos err=0 currentPosition=0 09:37:43 FLIGetStepsRemaining err=0 RemainingSteps=0 09:37:43 Filter is already there-color wheel unchanged 09:37:43 Received message from Master: op=Shutter serial=60606 09:37:43 Shutter LASER close 09:37:43 Received message from Camera: op=State serial=60608 09:37:43 GetSingleValue result=40 Value=cccccccc 09:37:43 SkyScan query 09:37:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:37:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:44 Parameters OK 09:37:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:44 Set A/D data flow result=40 09:37:44 Set A/D channel type result=40 09:37:44 Set A/D encoding result=40 09:37:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:44 Set channel filter=0.000000e+000 result=40 09:37:44 Config A/D Result=40 09:37:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:44 Get A/D filter: -9.255963e+061 result=40 09:37:44 Get A/D value=-858993460 result=40 09:37:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:44 Parameters OK 09:37:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:44 Set A/D data flow result=40 09:37:44 Set A/D channel type result=40 09:37:44 Set A/D encoding result=40 09:37:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:44 Set channel filter=0.000000e+000 result=40 09:37:44 Config A/D Result=40 09:37:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:44 Get A/D filter: -9.255963e+061 result=40 09:37:44 Get A/D value=-858993460 result=40 09:37:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:37:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:37:44 Aux= 09:37:44 Message to Camera, serial 60608 queued 09:38:21 Received message from Master: op=PointingHead serial=60621 09:38:21 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:38:21 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:38:21 Point started: ret=0 09:38:21 point_skyscan result=0 09:38:22 Check angles 09:38:22 SkyScan query 09:38:22 SkyScan query done: ret=0 az=152.565<-10171 ze=-21.18<-13412 Statuses=0009 0009 09:38:22 Msec=0 True Az=152.565 Ze=-21.18 Az status=0009 Ze status=0009 09:38:23 Check angles 09:38:23 SkyScan query 09:38:23 SkyScan query done: ret=0 az=135.105<-9007 ze=-0.225<-12015 Statuses=0009 0009 09:38:23 Msec=750 True Az=135.105 Ze=-0.225 Az status=0009 Ze status=0009 09:38:23 Check angles 09:38:23 SkyScan query 09:38:24 SkyScan query done: ret=0 az=117.105<-7807 ze=21.195<-10587 Statuses=0009 0009 09:38:24 Msec=1500 True Az=117.105 Ze=21.195 Az status=0009 Ze status=0009 09:38:24 Check angles 09:38:24 SkyScan query 09:38:25 SkyScan query done: ret=0 az=99.54<-6636 ze=42.48<-9168 Statuses=0009 0009 09:38:25 Msec=2250 True Az=99.54 Ze=42.48 Az status=0009 Ze status=0009 09:38:25 Check angles 09:38:25 SkyScan query 09:38:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 09:38:26 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 09:38:26 Check angles 09:38:26 SkyScan query 09:38:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:38:26 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:38:26 Message to Master queued w/err=0: serial=60621 error=0 09:38:31 Received message from Master: op=Filter serial=60622 09:38:31 Color wheel filter change from 0 to 0 09:38:31 FLIGetFilterPos err=0 currentPosition=0 09:38:31 FLIGetStepsRemaining err=0 RemainingSteps=0 09:38:31 Filter is already there-color wheel unchanged 09:38:31 Received message from Master: op=Shutter serial=60623 09:38:31 Shutter LASER close 09:38:31 Received message from Camera: op=State serial=60625 09:38:31 GetSingleValue result=40 Value=cccccccc 09:38:31 SkyScan query 09:38:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:38:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:32 Parameters OK 09:38:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:32 Set A/D data flow result=40 09:38:32 Set A/D channel type result=40 09:38:32 Set A/D encoding result=40 09:38:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:32 Set channel filter=0.000000e+000 result=40 09:38:32 Config A/D Result=40 09:38:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:32 Get A/D filter: -9.255963e+061 result=40 09:38:32 Get A/D value=-858993460 result=40 09:38:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:32 Parameters OK 09:38:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:32 Set A/D data flow result=40 09:38:32 Set A/D channel type result=40 09:38:32 Set A/D encoding result=40 09:38:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:32 Set channel filter=0.000000e+000 result=40 09:38:32 Config A/D Result=40 09:38:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:32 Get A/D filter: -9.255963e+061 result=40 09:38:32 Get A/D value=-858993460 result=40 09:38:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:38:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:38:32 Aux= 09:38:32 Message to Camera, serial 60625 queued 09:39:09 Received message from Master: op=PointingHead serial=60638 09:39:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:39:09 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:39:09 Point started: ret=0 09:39:09 point_skyscan result=0 09:39:10 Check angles 09:39:10 SkyScan query 09:39:11 SkyScan query done: ret=0 az=108.795<-7253 ze=38.49<-9434 Statuses=0009 0008 09:39:11 Msec=0 True Az=108.795 Ze=38.49 Az status=0009 Ze status=0008 09:39:11 Check angles 09:39:11 SkyScan query 09:39:11 SkyScan query done: ret=0 az=126.495<-8433 ze=38.505<-9433 Statuses=0009 0008 09:39:11 Msec=750 True Az=126.495 Ze=38.505 Az status=0009 Ze status=0008 09:39:11 Check angles 09:39:11 SkyScan query 09:39:12 SkyScan query done: ret=0 az=143.88<-9592 ze=38.505<-9433 Statuses=0009 0008 09:39:12 Msec=1500 True Az=143.88 Ze=38.505 Az status=0009 Ze status=0008 09:39:12 Check angles 09:39:12 SkyScan query 09:39:13 SkyScan query done: ret=0 az=161.115<-10741 ze=38.505<-9433 Statuses=0009 0008 09:39:13 Msec=2250 True Az=161.115 Ze=38.505 Az status=0009 Ze status=0008 09:39:13 Check angles 09:39:13 SkyScan query 09:39:14 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 09:39:14 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 09:39:14 Check angles 09:39:14 SkyScan query 09:39:14 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:39:14 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:39:14 Message to Master queued w/err=0: serial=60638 error=0 09:39:19 Received message from Master: op=Filter serial=60639 09:39:19 Color wheel filter change from 0 to 0 09:39:19 FLIGetFilterPos err=0 currentPosition=0 09:39:19 FLIGetStepsRemaining err=0 RemainingSteps=0 09:39:19 Filter is already there-color wheel unchanged 09:39:19 Received message from Master: op=Shutter serial=60640 09:39:19 Shutter LASER close 09:39:20 Received message from Camera: op=State serial=60642 09:39:20 GetSingleValue result=40 Value=cccccccc 09:39:20 SkyScan query 09:39:20 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:39:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:20 Parameters OK 09:39:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:20 Set A/D data flow result=40 09:39:20 Set A/D channel type result=40 09:39:20 Set A/D encoding result=40 09:39:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:20 Set channel filter=0.000000e+000 result=40 09:39:20 Config A/D Result=40 09:39:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:20 Get A/D filter: -9.255963e+061 result=40 09:39:20 Get A/D value=-858993460 result=40 09:39:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:20 Parameters OK 09:39:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:20 Set A/D data flow result=40 09:39:20 Set A/D channel type result=40 09:39:20 Set A/D encoding result=40 09:39:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:20 Set channel filter=0.000000e+000 result=40 09:39:20 Config A/D Result=40 09:39:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:20 Get A/D filter: -9.255963e+061 result=40 09:39:20 Get A/D value=-858993460 result=40 09:39:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:39:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:39:20 Aux= 09:39:20 Message to Camera, serial 60642 queued 09:39:57 Received message from Master: op=PointingHead serial=60655 09:39:57 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:39:57 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:39:57 Point started: ret=0 09:39:57 point_skyscan result=0 09:39:58 Check angles 09:39:58 SkyScan query 09:39:59 SkyScan query done: ret=0 az=152.97<-10198 ze=8.7<-11420 Statuses=0009 0009 09:39:59 Msec=0 True Az=152.97 Ze=8.7 Az status=0009 Ze status=0009 09:39:59 Check angles 09:39:59 SkyScan query 09:39:59 SkyScan query done: ret=0 az=135.21<-9014 ze=-12.645<-12843 Statuses=0009 0009 09:39:59 Msec=750 True Az=135.21 Ze=-12.645 Az status=0009 Ze status=0009 09:40:00 Check angles 09:40:00 SkyScan query 09:40:00 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.615<-14241 Statuses=0009 0009 09:40:00 Msec=1500 True Az=117.57 Ze=-33.615 Az status=0009 Ze status=0009 09:40:00 Check angles 09:40:00 SkyScan query 09:40:01 SkyScan query done: ret=0 az=100.2<-6680 ze=-51.555<-15437 Statuses=0009 0009 09:40:01 Msec=2250 True Az=100.2 Ze=-51.555 Az status=0009 Ze status=0009 09:40:01 Check angles 09:40:01 SkyScan query 09:40:02 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 09:40:02 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 09:40:02 Check angles 09:40:02 SkyScan query 09:40:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:40:02 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:40:02 Message to Master queued w/err=0: serial=60655 error=0 09:40:07 Received message from Master: op=Filter serial=60656 09:40:07 Color wheel filter change from 0 to 0 09:40:07 FLIGetFilterPos err=0 currentPosition=0 09:40:07 FLIGetStepsRemaining err=0 RemainingSteps=0 09:40:07 Filter is already there-color wheel unchanged 09:40:08 Received message from Master: op=Shutter serial=60657 09:40:08 Shutter LASER close 09:40:08 Received message from Camera: op=State serial=60659 09:40:08 GetSingleValue result=40 Value=cccccccc 09:40:08 SkyScan query 09:40:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:40:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:08 Parameters OK 09:40:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:08 Set A/D data flow result=40 09:40:08 Set A/D channel type result=40 09:40:08 Set A/D encoding result=40 09:40:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:08 Set channel filter=0.000000e+000 result=40 09:40:08 Config A/D Result=40 09:40:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:08 Get A/D filter: -9.255963e+061 result=40 09:40:08 Get A/D value=-858993460 result=40 09:40:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:08 Parameters OK 09:40:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:08 Set A/D data flow result=40 09:40:08 Set A/D channel type result=40 09:40:08 Set A/D encoding result=40 09:40:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:08 Set channel filter=0.000000e+000 result=40 09:40:08 Config A/D Result=40 09:40:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:08 Get A/D filter: -9.255963e+061 result=40 09:40:08 Get A/D value=-858993460 result=40 09:40:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:40:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:40:08 Aux= 09:40:08 Message to Camera, serial 60659 queued 09:40:45 Received message from Master: op=PointingHead serial=60672 09:40:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:40:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:40:45 Point started: ret=0 09:40:45 point_skyscan result=0 09:40:46 Check angles 09:40:46 SkyScan query 09:40:47 SkyScan query done: ret=0 az=109.455<-7297 ze=-81.855<-17457 Statuses=0009 0009 09:40:47 Msec=0 True Az=109.455 Ze=-81.855 Az status=0009 Ze status=0009 09:40:47 Check angles 09:40:47 SkyScan query 09:40:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.215<-18881 Statuses=0008 0009 09:40:47 Msec=750 True Az=112.995 Ze=-103.215 Az status=0008 Ze status=0009 09:40:48 Check angles 09:40:48 SkyScan query 09:40:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.2<-20280 Statuses=0008 0009 09:40:48 Msec=1500 True Az=112.995 Ze=-124.2 Az status=0008 Ze status=0009 09:40:48 Check angles 09:40:48 SkyScan query 09:40:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.125<-21675 Statuses=0008 0009 09:40:49 Msec=2250 True Az=112.995 Ze=-145.125 Az status=0008 Ze status=0009 09:40:49 Check angles 09:40:49 SkyScan query 09:40:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.545<-23103 Statuses=0008 0009 09:40:50 Msec=3000 True Az=112.995 Ze=-166.545 Az status=0008 Ze status=0009 09:40:50 Check angles 09:40:50 SkyScan query 09:40:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:40:51 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:40:51 Message to Master queued w/err=0: serial=60672 error=0 09:40:56 Received message from Master: op=Filter serial=60673 09:40:56 Color wheel filter change from 0 to 0 09:40:56 FLIGetFilterPos err=0 currentPosition=0 09:40:56 FLIGetStepsRemaining err=0 RemainingSteps=0 09:40:56 Filter is already there-color wheel unchanged 09:40:56 Received message from Master: op=Shutter serial=60674 09:40:56 Shutter LASER open 09:40:56 Received message from Camera: op=State serial=60676 09:40:56 GetSingleValue result=40 Value=cccccccc 09:40:56 SkyScan query 09:40:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:40:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:56 Parameters OK 09:40:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:56 Set A/D data flow result=40 09:40:56 Set A/D channel type result=40 09:40:56 Set A/D encoding result=40 09:40:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:56 Set channel filter=0.000000e+000 result=40 09:40:56 Config A/D Result=40 09:40:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:56 Get A/D filter: -9.255963e+061 result=40 09:40:56 Get A/D value=-858993460 result=40 09:40:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:56 Parameters OK 09:40:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:56 Set A/D data flow result=40 09:40:56 Set A/D channel type result=40 09:40:56 Set A/D encoding result=40 09:40:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:56 Set channel filter=0.000000e+000 result=40 09:40:56 Config A/D Result=40 09:40:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:56 Get A/D filter: -9.255963e+061 result=40 09:40:56 Get A/D value=-858993460 result=40 09:40:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:40:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:40:56 Aux= 09:40:56 Message to Camera, serial 60676 queued 09:41:05 Received message from Master: op=Shutter serial=60686 09:41:05 Shutter LASER close 09:41:05 Received message from Master: op=PointingHead serial=60690 09:41:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:41:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:41:06 Point started: ret=0 09:41:06 point_skyscan result=0 09:41:06 Check angles 09:41:06 SkyScan query 09:41:07 SkyScan query done: ret=0 az=89.64<-5976 ze=156.825<-1545 Statuses=0009 0009 09:41:07 Msec=0 True Az=89.64 Ze=156.825 Az status=0009 Ze status=0009 09:41:07 Check angles 09:41:07 SkyScan query 09:41:08 SkyScan query done: ret=0 az=71.565<-4771 ze=135.465<-2969 Statuses=0009 0009 09:41:08 Msec=750 True Az=71.565 Ze=135.465 Az status=0009 Ze status=0009 09:41:08 Check angles 09:41:08 SkyScan query 09:41:09 SkyScan query done: ret=0 az=54.48<-3632 ze=114.465<-4369 Statuses=0009 0009 09:41:09 Msec=1500 True Az=54.48 Ze=114.465 Az status=0009 Ze status=0009 09:41:09 Check angles 09:41:09 SkyScan query 09:41:09 SkyScan query done: ret=0 az=41.01<-2734 ze=93.075<-5795 Statuses=0009 0009 09:41:09 Msec=2250 True Az=41.01 Ze=93.075 Az status=0009 Ze status=0009 09:41:10 Check angles 09:41:10 SkyScan query 09:41:10 SkyScan query done: ret=0 az=40.995<-2733 ze=72.15<-7190 Statuses=0008 0009 09:41:10 Msec=3000 True Az=40.995 Ze=72.15 Az status=0008 Ze status=0009 09:41:10 Check angles 09:41:10 SkyScan query 09:41:11 SkyScan query done: ret=0 az=40.995<-2733 ze=52.125<-8525 Statuses=0008 0009 09:41:11 Msec=3750 True Az=40.995 Ze=52.125 Az status=0008 Ze status=0009 09:41:11 Check angles 09:41:11 SkyScan query 09:41:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:41:12 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:41:12 Message to Master queued w/err=0: serial=60690 error=0 09:41:17 Received message from Master: op=Filter serial=60691 09:41:17 Color wheel filter change from 0 to 0 09:41:17 FLIGetFilterPos err=0 currentPosition=0 09:41:17 FLIGetStepsRemaining err=0 RemainingSteps=0 09:41:17 Filter is already there-color wheel unchanged 09:41:17 Received message from Master: op=Shutter serial=60692 09:41:17 Shutter LASER close 09:41:17 Received message from Camera: op=State serial=60694 09:41:17 GetSingleValue result=40 Value=cccccccc 09:41:17 SkyScan query 09:41:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:41:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:18 Parameters OK 09:41:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:18 Set A/D data flow result=40 09:41:18 Set A/D channel type result=40 09:41:18 Set A/D encoding result=40 09:41:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:18 Set channel filter=0.000000e+000 result=40 09:41:18 Config A/D Result=40 09:41:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:18 Get A/D filter: -9.255963e+061 result=40 09:41:18 Get A/D value=-858993460 result=40 09:41:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:18 Parameters OK 09:41:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:18 Set A/D data flow result=40 09:41:18 Set A/D channel type result=40 09:41:18 Set A/D encoding result=40 09:41:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:18 Set channel filter=0.000000e+000 result=40 09:41:18 Config A/D Result=40 09:41:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:18 Get A/D filter: -9.255963e+061 result=40 09:41:18 Get A/D value=-858993460 result=40 09:41:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:41:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:41:18 Aux= 09:41:18 Message to Camera, serial 60694 queued 09:41:54 Received message from Master: op=PointingHead serial=60707 09:41:54 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:41:54 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:41:55 Point started: ret=0 09:41:55 point_skyscan result=0 09:41:55 Check angles 09:41:55 SkyScan query 09:41:56 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 09:41:56 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 09:41:56 Check angles 09:41:56 SkyScan query 09:41:57 SkyScan query done: ret=0 az=81.615<-5441 ze=66.495<-7567 Statuses=0009 0008 09:41:57 Msec=750 True Az=81.615 Ze=66.495 Az status=0009 Ze status=0008 09:41:57 Check angles 09:41:57 SkyScan query 09:41:58 SkyScan query done: ret=0 az=99.18<-6612 ze=66.495<-7567 Statuses=0009 0008 09:41:58 Msec=1500 True Az=99.18 Ze=66.495 Az status=0009 Ze status=0008 09:41:58 Check angles 09:41:58 SkyScan query 09:41:58 SkyScan query done: ret=0 az=116.745<-7783 ze=66.495<-7567 Statuses=0009 0008 09:41:58 Msec=2250 True Az=116.745 Ze=66.495 Az status=0009 Ze status=0008 09:41:58 Check angles 09:41:58 SkyScan query 09:41:59 SkyScan query done: ret=0 az=134.235<-8949 ze=66.495<-7567 Statuses=0009 0008 09:41:59 Msec=3000 True Az=134.235 Ze=66.495 Az status=0009 Ze status=0008 09:41:59 Check angles 09:41:59 SkyScan query 09:42:00 SkyScan query done: ret=0 az=151.605<-10107 ze=66.495<-7567 Statuses=0009 0008 09:42:00 Msec=3750 True Az=151.605 Ze=66.495 Az status=0009 Ze status=0008 09:42:00 Check angles 09:42:00 SkyScan query 09:42:01 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 09:42:01 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 09:42:01 Message to Master queued w/err=0: serial=60707 error=0 09:42:06 Received message from Master: op=Filter serial=60708 09:42:06 Color wheel filter change from 0 to 0 09:42:06 FLIGetFilterPos err=0 currentPosition=0 09:42:06 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:06 Filter is already there-color wheel unchanged 09:42:06 Received message from Master: op=Shutter serial=60709 09:42:06 Shutter LASER close 09:42:06 Received message from Camera: op=State serial=60711 09:42:06 GetSingleValue result=40 Value=cccccccc 09:42:06 SkyScan query 09:42:06 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:42:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:06 Parameters OK 09:42:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:06 Set A/D data flow result=40 09:42:06 Set A/D channel type result=40 09:42:06 Set A/D encoding result=40 09:42:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:06 Set channel filter=0.000000e+000 result=40 09:42:06 Config A/D Result=40 09:42:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:06 Get A/D filter: -9.255963e+061 result=40 09:42:06 Get A/D value=-858993460 result=40 09:42:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:06 Parameters OK 09:42:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:06 Set A/D data flow result=40 09:42:06 Set A/D channel type result=40 09:42:06 Set A/D encoding result=40 09:42:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:06 Set channel filter=0.000000e+000 result=40 09:42:06 Config A/D Result=40 09:42:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:06 Get A/D filter: -9.255963e+061 result=40 09:42:06 Get A/D value=-858993460 result=40 09:42:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:06 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:06 Aux= 09:42:06 Message to Camera, serial 60711 queued 09:42:43 Received message from Master: op=PointingHead serial=60724 09:42:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:42:43 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:42:43 Point started: ret=0 09:42:43 point_skyscan result=0 09:42:44 Check angles 09:42:44 SkyScan query 09:42:45 SkyScan query done: ret=0 az=134.61<-8974 ze=36.435<-9571 Statuses=0009 0009 09:42:45 Msec=0 True Az=134.61 Ze=36.435 Az status=0009 Ze status=0009 09:42:45 Check angles 09:42:45 SkyScan query 09:42:46 SkyScan query done: ret=0 az=116.88<-7792 ze=15.045<-10997 Statuses=0009 0009 09:42:46 Msec=750 True Az=116.88 Ze=15.045 Az status=0009 Ze status=0009 09:42:46 Check angles 09:42:46 SkyScan query 09:42:46 SkyScan query done: ret=0 az=99.465<-6631 ze=-5.895<-12393 Statuses=0009 0009 09:42:46 Msec=1500 True Az=99.465 Ze=-5.895 Az status=0009 Ze status=0009 09:42:47 Check angles 09:42:47 SkyScan query 09:42:47 SkyScan query done: ret=0 az=82.05<-5470 ze=-26.85<-13790 Statuses=0009 0009 09:42:47 Msec=2250 True Az=82.05 Ze=-26.85 Az status=0009 Ze status=0009 09:42:47 Check angles 09:42:47 SkyScan query 09:42:48 SkyScan query done: ret=0 az=64.125<-4275 ze=-38.565<-14571 Statuses=0009 0008 09:42:48 Msec=3000 True Az=64.125 Ze=-38.565 Az status=0009 Ze status=0008 09:42:48 Check angles 09:42:48 SkyScan query 09:42:49 SkyScan query done: ret=0 az=46.395<-3093 ze=-38.52<-14568 Statuses=0009 0008 09:42:49 Msec=3750 True Az=46.395 Ze=-38.52 Az status=0009 Ze status=0008 09:42:49 Check angles 09:42:49 SkyScan query 09:42:49 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 09:42:49 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 09:42:49 Message to Master queued w/err=0: serial=60724 error=0 09:42:54 Received message from Master: op=Filter serial=60725 09:42:54 Color wheel filter change from 0 to 0 09:42:54 FLIGetFilterPos err=0 currentPosition=0 09:42:54 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:54 Filter is already there-color wheel unchanged 09:42:55 Received message from Master: op=Shutter serial=60726 09:42:55 Shutter LASER close 09:42:55 Received message from Camera: op=State serial=60728 09:42:55 GetSingleValue result=40 Value=cccccccc 09:42:55 SkyScan query 09:42:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:42:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:55 Parameters OK 09:42:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:55 Set A/D data flow result=40 09:42:55 Set A/D channel type result=40 09:42:55 Set A/D encoding result=40 09:42:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:55 Set channel filter=0.000000e+000 result=40 09:42:55 Config A/D Result=40 09:42:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:55 Get A/D filter: -9.255963e+061 result=40 09:42:55 Get A/D value=-858993460 result=40 09:42:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:55 Parameters OK 09:42:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:55 Set A/D data flow result=40 09:42:55 Set A/D channel type result=40 09:42:55 Set A/D encoding result=40 09:42:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:55 Set channel filter=0.000000e+000 result=40 09:42:55 Config A/D Result=40 09:42:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:55 Get A/D filter: -9.255963e+061 result=40 09:42:55 Get A/D value=-858993460 result=40 09:42:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:55 Aux= 09:42:55 Message to Camera, serial 60728 queued 09:43:32 Received message from Master: op=PointingHead serial=60741 09:43:32 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:43:32 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:43:32 Point started: ret=0 09:43:32 point_skyscan result=0 09:43:33 Check angles 09:43:33 SkyScan query 09:43:34 SkyScan query done: ret=0 az=64.29<-4286 ze=-68.64<-16576 Statuses=0009 0009 09:43:34 Msec=0 True Az=64.29 Ze=-68.64 Az status=0009 Ze status=0009 09:43:34 Check angles 09:43:34 SkyScan query 09:43:34 SkyScan query done: ret=0 az=81.72<-5448 ze=-89.595<-17973 Statuses=0009 0009 09:43:34 Msec=750 True Az=81.72 Ze=-89.595 Az status=0009 Ze status=0009 09:43:35 Check angles 09:43:35 SkyScan query 09:43:35 SkyScan query done: ret=0 az=99.705<-6647 ze=-110.985<-19399 Statuses=0009 0009 09:43:35 Msec=1500 True Az=99.705 Ze=-110.985 Az status=0009 Ze status=0009 09:43:35 Check angles 09:43:35 SkyScan query 09:43:36 SkyScan query done: ret=0 az=117.165<-7811 ze=-131.895<-20793 Statuses=0009 0009 09:43:36 Msec=2250 True Az=117.165 Ze=-131.895 Az status=0009 Ze status=0009 09:43:36 Check angles 09:43:36 SkyScan query 09:43:37 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 09:43:37 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 09:43:37 Check angles 09:43:37 SkyScan query 09:43:37 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:43:37 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:43:37 Message to Master queued w/err=0: serial=60741 error=0 09:43:42 Received message from Master: op=Filter serial=60742 09:43:42 Color wheel filter change from 0 to 0 09:43:42 FLIGetFilterPos err=0 currentPosition=0 09:43:42 FLIGetStepsRemaining err=0 RemainingSteps=0 09:43:42 Filter is already there-color wheel unchanged 09:43:43 Received message from Master: op=Shutter serial=60743 09:43:43 Shutter LASER close 09:43:43 Received message from Camera: op=State serial=60745 09:43:43 GetSingleValue result=40 Value=cccccccc 09:43:43 SkyScan query 09:43:43 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:43:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:43 Parameters OK 09:43:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:43 Set A/D data flow result=40 09:43:43 Set A/D channel type result=40 09:43:43 Set A/D encoding result=40 09:43:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:43 Set channel filter=0.000000e+000 result=40 09:43:43 Config A/D Result=40 09:43:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:43 Get A/D filter: -9.255963e+061 result=40 09:43:43 Get A/D value=-858993460 result=40 09:43:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:43 Parameters OK 09:43:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:43 Set A/D data flow result=40 09:43:43 Set A/D channel type result=40 09:43:43 Set A/D encoding result=40 09:43:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:43 Set channel filter=0.000000e+000 result=40 09:43:43 Config A/D Result=40 09:43:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:43 Get A/D filter: -9.255963e+061 result=40 09:43:43 Get A/D value=-858993460 result=40 09:43:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:43 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:43:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:43:43 Aux= 09:43:43 Message to Camera, serial 60745 queued 09:44:20 Received message from Master: op=PointingHead serial=60758 09:44:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:44:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:44:20 Point started: ret=0 09:44:20 point_skyscan result=0 09:44:21 Check angles 09:44:21 SkyScan query 09:44:22 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.225<-23415 Statuses=0009 0009 09:44:22 Msec=0 True Az=113.01 Ze=-171.225 Az status=0009 Ze status=0009 09:44:22 Check angles 09:44:22 SkyScan query 09:44:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:44:23 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:44:23 Message to Master queued w/err=0: serial=60758 error=0 09:44:28 Received message from Master: op=Filter serial=60759 09:44:28 Color wheel filter change from 0 to 0 09:44:28 FLIGetFilterPos err=0 currentPosition=0 09:44:28 FLIGetStepsRemaining err=0 RemainingSteps=0 09:44:28 Filter is already there-color wheel unchanged 09:44:28 Received message from Master: op=Shutter serial=60760 09:44:28 Shutter LASER open 09:44:28 Received message from Camera: op=State serial=60762 09:44:28 GetSingleValue result=40 Value=cccccccc 09:44:28 SkyScan query 09:44:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:44:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:28 Parameters OK 09:44:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:28 Set A/D data flow result=40 09:44:28 Set A/D channel type result=40 09:44:28 Set A/D encoding result=40 09:44:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:28 Set channel filter=0.000000e+000 result=40 09:44:28 Config A/D Result=40 09:44:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:28 Get A/D filter: -9.255963e+061 result=40 09:44:28 Get A/D value=-858993460 result=40 09:44:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:28 Parameters OK 09:44:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:28 Set A/D data flow result=40 09:44:28 Set A/D channel type result=40 09:44:28 Set A/D encoding result=40 09:44:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:28 Set channel filter=0.000000e+000 result=40 09:44:28 Config A/D Result=40 09:44:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:28 Get A/D filter: -9.255963e+061 result=40 09:44:28 Get A/D value=-858993460 result=40 09:44:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:44:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:44:28 Aux= 09:44:28 Message to Camera, serial 60762 queued 09:44:37 Received message from Master: op=Shutter serial=60772 09:44:37 Shutter LASER close 09:44:37 Received message from Master: op=PointingHead serial=60776 09:44:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:44:37 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:44:38 Point started: ret=0 09:44:38 point_skyscan result=0 09:44:39 Check angles 09:44:39 SkyScan query 09:44:39 SkyScan query done: ret=0 az=136.14<-9076 ze=-142.89<-21526 Statuses=0009 0009 09:44:39 Msec=0 True Az=136.14 Ze=-142.89 Az status=0009 Ze status=0009 09:44:39 Check angles 09:44:39 SkyScan query 09:44:40 SkyScan query done: ret=0 az=154.08<-10272 ze=-121.515<-20101 Statuses=0009 0009 09:44:40 Msec=750 True Az=154.08 Ze=-121.515 Az status=0009 Ze status=0009 09:44:40 Check angles 09:44:40 SkyScan query 09:44:41 SkyScan query done: ret=0 az=171.54<-11436 ze=-100.485<-18699 Statuses=0009 0009 09:44:41 Msec=1500 True Az=171.54 Ze=-100.485 Az status=0009 Ze status=0009 09:44:41 Check angles 09:44:41 SkyScan query 09:44:41 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.62<-17308 Statuses=0008 0009 09:44:41 Msec=2250 True Az=176.025 Ze=-79.62 Az status=0008 Ze status=0009 09:44:42 Check angles 09:44:42 SkyScan query 09:44:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.17<-15878 Statuses=0008 0009 09:44:42 Msec=3000 True Az=175.995 Ze=-58.17 Az status=0008 Ze status=0009 09:44:42 Check angles 09:44:42 SkyScan query 09:44:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:44:43 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:44:43 Message to Master queued w/err=0: serial=60776 error=0 09:44:48 Received message from Master: op=Filter serial=60777 09:44:48 Color wheel filter change from 0 to 0 09:44:48 FLIGetFilterPos err=0 currentPosition=0 09:44:48 FLIGetStepsRemaining err=0 RemainingSteps=0 09:44:48 Filter is already there-color wheel unchanged 09:44:48 Received message from Master: op=Shutter serial=60778 09:44:48 Shutter LASER close 09:44:48 Received message from Camera: op=State serial=60780 09:44:48 GetSingleValue result=40 Value=cccccccc 09:44:48 SkyScan query 09:44:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:44:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:49 Parameters OK 09:44:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:49 Set A/D data flow result=40 09:44:49 Set A/D channel type result=40 09:44:49 Set A/D encoding result=40 09:44:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:49 Set channel filter=0.000000e+000 result=40 09:44:49 Config A/D Result=40 09:44:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:49 Get A/D filter: -9.255963e+061 result=40 09:44:49 Get A/D value=-858993460 result=40 09:44:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:49 Parameters OK 09:44:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:49 Set A/D data flow result=40 09:44:49 Set A/D channel type result=40 09:44:49 Set A/D encoding result=40 09:44:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:49 Set channel filter=0.000000e+000 result=40 09:44:49 Config A/D Result=40 09:44:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:49 Get A/D filter: -9.255963e+061 result=40 09:44:49 Get A/D value=-858993460 result=40 09:44:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:44:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:44:49 Aux= 09:44:49 Message to Camera, serial 60780 queued 09:45:26 Received message from Master: op=PointingHead serial=60793 09:45:26 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:45:26 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:45:26 Point started: ret=0 09:45:26 point_skyscan result=0 09:45:27 Check angles 09:45:27 SkyScan query 09:45:27 SkyScan query done: ret=0 az=152.7<-10180 ze=-21.285<-13419 Statuses=0009 0009 09:45:27 Msec=0 True Az=152.7 Ze=-21.285 Az status=0009 Ze status=0009 09:45:28 Check angles 09:45:28 SkyScan query 09:45:28 SkyScan query done: ret=0 az=134.775<-8985 ze=0.09<-11994 Statuses=0009 0009 09:45:28 Msec=750 True Az=134.775 Ze=0.09 Az status=0009 Ze status=0009 09:45:28 Check angles 09:45:28 SkyScan query 09:45:29 SkyScan query done: ret=0 az=117.225<-7815 ze=21.09<-10594 Statuses=0009 0009 09:45:29 Msec=1500 True Az=117.225 Ze=21.09 Az status=0009 Ze status=0009 09:45:29 Received message from Master: op=Identify serial=60794 09:45:29 Check angles 09:45:29 SkyScan query 09:45:30 SkyScan query done: ret=0 az=99.9<-6660 ze=42.015<-9199 Statuses=0009 0009 09:45:30 Msec=2250 True Az=99.9 Ze=42.015 Az status=0009 Ze status=0009 09:45:30 Check angles 09:45:30 SkyScan query 09:45:30 SkyScan query done: ret=0 az=86.04<-5736 ze=51.555<-8563 Statuses=0009 0008 09:45:30 Msec=3000 True Az=86.04 Ze=51.555 Az status=0009 Ze status=0008 09:45:31 Check angles 09:45:31 SkyScan query 09:45:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:45:31 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:45:31 Message to Master queued w/err=0: serial=60793 error=0 09:45:36 Received message from Master: op=Filter serial=60797 09:45:36 Color wheel filter change from 0 to 0 09:45:36 FLIGetFilterPos err=0 currentPosition=0 09:45:36 FLIGetStepsRemaining err=0 RemainingSteps=0 09:45:36 Filter is already there-color wheel unchanged 09:45:36 Received message from Master: op=Shutter serial=60798 09:45:36 Shutter LASER close 09:45:36 Received message from Camera: op=State serial=60800 09:45:36 GetSingleValue result=40 Value=cccccccc 09:45:36 SkyScan query 09:45:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:45:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:37 Parameters OK 09:45:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:37 Set A/D data flow result=40 09:45:37 Set A/D channel type result=40 09:45:37 Set A/D encoding result=40 09:45:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:37 Set channel filter=0.000000e+000 result=40 09:45:37 Config A/D Result=40 09:45:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:37 Get A/D filter: -9.255963e+061 result=40 09:45:37 Get A/D value=-858993460 result=40 09:45:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:37 Parameters OK 09:45:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:37 Set A/D data flow result=40 09:45:37 Set A/D channel type result=40 09:45:37 Set A/D encoding result=40 09:45:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:37 Set channel filter=0.000000e+000 result=40 09:45:37 Config A/D Result=40 09:45:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:37 Get A/D filter: -9.255963e+061 result=40 09:45:37 Get A/D value=-858993460 result=40 09:45:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:45:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:45:37 Aux= 09:45:37 Message to Camera, serial 60800 queued 09:46:13 Received message from Master: op=PointingHead serial=60812 09:46:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:46:13 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:46:13 Point started: ret=0 09:46:13 point_skyscan result=0 09:46:14 Check angles 09:46:14 SkyScan query 09:46:15 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 09:46:15 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 09:46:15 Check angles 09:46:15 SkyScan query 09:46:15 SkyScan query done: ret=0 az=126.765<-8451 ze=38.505<-9433 Statuses=0009 0008 09:46:15 Msec=750 True Az=126.765 Ze=38.505 Az status=0009 Ze status=0008 09:46:15 Check angles 09:46:15 SkyScan query 09:46:16 SkyScan query done: ret=0 az=144.15<-9610 ze=38.505<-9433 Statuses=0009 0008 09:46:16 Msec=1500 True Az=144.15 Ze=38.505 Az status=0009 Ze status=0008 09:46:16 Check angles [UTC 2018-12-11 09:46:16] 09:46:16 SkyScan query 09:46:17 SkyScan query done: ret=0 az=163.47<-10898 ze=38.505<-9433 Statuses=0009 0008 09:46:17 Msec=2250 True Az=163.47 Ze=38.505 Az status=0009 Ze status=0008 09:46:17 Check angles 09:46:17 SkyScan query 09:46:18 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 09:46:18 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 09:46:18 Check angles 09:46:18 SkyScan query 09:46:18 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:46:18 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:46:18 Message to Master queued w/err=0: serial=60812 error=0 09:46:23 Received message from Master: op=Filter serial=60813 09:46:23 Color wheel filter change from 0 to 0 09:46:23 FLIGetFilterPos err=0 currentPosition=0 09:46:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:46:23 Filter is already there-color wheel unchanged 09:46:23 Received message from Master: op=Shutter serial=60814 09:46:23 Shutter LASER close 09:46:24 Received message from Camera: op=State serial=60816 09:46:24 GetSingleValue result=40 Value=cccccccc 09:46:24 SkyScan query 09:46:24 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:46:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:24 Parameters OK 09:46:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:24 Set A/D data flow result=40 09:46:24 Set A/D channel type result=40 09:46:24 Set A/D encoding result=40 09:46:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:24 Set channel filter=0.000000e+000 result=40 09:46:24 Config A/D Result=40 09:46:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:24 Get A/D filter: -9.255963e+061 result=40 09:46:24 Get A/D value=-858993460 result=40 09:46:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:24 Parameters OK 09:46:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:24 Set A/D data flow result=40 09:46:24 Set A/D channel type result=40 09:46:24 Set A/D encoding result=40 09:46:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:24 Set channel filter=0.000000e+000 result=40 09:46:24 Config A/D Result=40 09:46:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:24 Get A/D filter: -9.255963e+061 result=40 09:46:24 Get A/D value=-858993460 result=40 09:46:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:46:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:46:24 Aux= 09:46:24 Message to Camera, serial 60816 queued 09:47:01 Received message from Master: op=PointingHead serial=60829 09:47:01 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:47:01 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:47:01 Point started: ret=0 09:47:01 point_skyscan result=0 09:47:02 Check angles 09:47:02 SkyScan query 09:47:03 SkyScan query done: ret=0 az=152.775<-10185 ze=8.58<-11428 Statuses=0009 0009 09:47:03 Msec=0 True Az=152.775 Ze=8.58 Az status=0009 Ze status=0009 09:47:03 Check angles 09:47:03 SkyScan query 09:47:03 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.345<-12823 Statuses=0009 0009 09:47:03 Msec=750 True Az=135.435 Ze=-12.345 Az status=0009 Ze status=0009 09:47:04 Check angles 09:47:04 SkyScan query 09:47:04 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.285<-14219 Statuses=0009 0009 09:47:04 Msec=1500 True Az=117.78 Ze=-33.285 Az status=0009 Ze status=0009 09:47:04 Check angles 09:47:04 SkyScan query 09:47:05 SkyScan query done: ret=0 az=100.065<-6671 ze=-51.57<-15438 Statuses=0009 0009 09:47:05 Msec=2250 True Az=100.065 Ze=-51.57 Az status=0009 Ze status=0009 09:47:05 Check angles 09:47:05 SkyScan query 09:47:06 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 09:47:06 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 09:47:06 Check angles 09:47:06 SkyScan query 09:47:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:47:06 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:47:06 Message to Master queued w/err=0: serial=60829 error=0 09:47:11 Received message from Master: op=Filter serial=60830 09:47:11 Color wheel filter change from 0 to 0 09:47:11 FLIGetFilterPos err=0 currentPosition=0 09:47:11 FLIGetStepsRemaining err=0 RemainingSteps=0 09:47:11 Filter is already there-color wheel unchanged 09:47:12 Received message from Master: op=Shutter serial=60831 09:47:12 Shutter LASER close 09:47:12 Received message from Camera: op=State serial=60833 09:47:12 GetSingleValue result=40 Value=cccccccc 09:47:12 SkyScan query 09:47:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:47:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:12 Parameters OK 09:47:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:12 Set A/D data flow result=40 09:47:12 Set A/D channel type result=40 09:47:12 Set A/D encoding result=40 09:47:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:12 Set channel filter=0.000000e+000 result=40 09:47:12 Config A/D Result=40 09:47:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:12 Get A/D filter: -9.255963e+061 result=40 09:47:12 Get A/D value=-858993460 result=40 09:47:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:12 Parameters OK 09:47:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:12 Set A/D data flow result=40 09:47:12 Set A/D channel type result=40 09:47:12 Set A/D encoding result=40 09:47:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:12 Set channel filter=0.000000e+000 result=40 09:47:12 Config A/D Result=40 09:47:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:12 Get A/D filter: -9.255963e+061 result=40 09:47:12 Get A/D value=-858993460 result=40 09:47:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:47:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:47:12 Aux= 09:47:12 Message to Camera, serial 60833 queued 09:47:49 Received message from Master: op=PointingHead serial=60846 09:47:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:47:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:47:49 Point started: ret=0 09:47:49 point_skyscan result=0 09:47:50 Check angles 09:47:50 SkyScan query 09:47:51 SkyScan query done: ret=0 az=109.065<-7271 ze=-81.045<-17403 Statuses=0009 0009 09:47:51 Msec=0 True Az=109.065 Ze=-81.045 Az status=0009 Ze status=0009 09:47:51 Check angles 09:47:51 SkyScan query 09:47:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.015<-18801 Statuses=0008 0009 09:47:51 Msec=750 True Az=112.995 Ze=-102.015 Az status=0008 Ze status=0009 09:47:52 Check angles 09:47:52 SkyScan query 09:47:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.39<-20226 Statuses=0008 0009 09:47:52 Msec=1500 True Az=112.995 Ze=-123.39 Az status=0008 Ze status=0009 09:47:52 Check angles 09:47:52 SkyScan query 09:47:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.36<-21624 Statuses=0008 0009 09:47:53 Msec=2250 True Az=112.995 Ze=-144.36 Az status=0008 Ze status=0009 09:47:53 Check angles 09:47:53 SkyScan query 09:47:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.3<-23020 Statuses=0008 0009 09:47:54 Msec=3000 True Az=112.995 Ze=-165.3 Az status=0008 Ze status=0009 09:47:54 Check angles 09:47:54 SkyScan query 09:47:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:47:54 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:47:54 Message to Master queued w/err=0: serial=60846 error=0 09:47:59 Received message from Master: op=Filter serial=60847 09:47:59 Color wheel filter change from 0 to 0 09:47:59 FLIGetFilterPos err=0 currentPosition=0 09:47:59 FLIGetStepsRemaining err=0 RemainingSteps=0 09:47:59 Filter is already there-color wheel unchanged 09:48:00 Received message from Master: op=Shutter serial=60848 09:48:00 Shutter LASER open 09:48:00 Received message from Camera: op=State serial=60850 09:48:00 GetSingleValue result=40 Value=cccccccc 09:48:00 SkyScan query 09:48:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:48:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:00 Parameters OK 09:48:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:00 Set A/D data flow result=40 09:48:00 Set A/D channel type result=40 09:48:00 Set A/D encoding result=40 09:48:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:00 Set channel filter=0.000000e+000 result=40 09:48:00 Config A/D Result=40 09:48:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:00 Get A/D filter: -9.255963e+061 result=40 09:48:00 Get A/D value=-858993460 result=40 09:48:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:00 Parameters OK 09:48:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:00 Set A/D data flow result=40 09:48:00 Set A/D channel type result=40 09:48:00 Set A/D encoding result=40 09:48:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:00 Set channel filter=0.000000e+000 result=40 09:48:00 Config A/D Result=40 09:48:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:00 Get A/D filter: -9.255963e+061 result=40 09:48:00 Get A/D value=-858993460 result=40 09:48:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:48:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:48:00 Aux= 09:48:00 Message to Camera, serial 60850 queued 09:48:09 Received message from Master: op=Shutter serial=60860 09:48:09 Shutter LASER close 09:48:09 Received message from Master: op=PointingHead serial=60864 09:48:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:48:09 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:48:10 Point started: ret=0 09:48:10 point_skyscan result=0 09:48:10 Check angles 09:48:10 SkyScan query 09:48:11 SkyScan query done: ret=0 az=89.595<-5973 ze=156.84<-1544 Statuses=0009 0009 09:48:11 Msec=0 True Az=89.595 Ze=156.84 Az status=0009 Ze status=0009 09:48:11 Check angles 09:48:11 SkyScan query 09:48:12 SkyScan query done: ret=0 az=71.82<-4788 ze=135.45<-2970 Statuses=0009 0009 09:48:12 Msec=750 True Az=71.82 Ze=135.45 Az status=0009 Ze status=0009 09:48:12 Check angles 09:48:12 SkyScan query 09:48:12 SkyScan query done: ret=0 az=54.51<-3634 ze=114.465<-4369 Statuses=0009 0009 09:48:12 Msec=1500 True Az=54.51 Ze=114.465 Az status=0009 Ze status=0009 09:48:13 Check angles 09:48:13 SkyScan query 09:48:13 SkyScan query done: ret=0 az=40.95<-2730 ze=93.555<-5763 Statuses=0009 0009 09:48:13 Msec=2250 True Az=40.95 Ze=93.555 Az status=0009 Ze status=0009 09:48:13 Check angles 09:48:13 SkyScan query 09:48:14 SkyScan query done: ret=0 az=40.995<-2733 ze=72.57<-7162 Statuses=0008 0009 09:48:14 Msec=3000 True Az=40.995 Ze=72.57 Az status=0008 Ze status=0009 09:48:14 Check angles 09:48:14 SkyScan query 09:48:15 SkyScan query done: ret=0 az=40.995<-2733 ze=52.335<-8511 Statuses=0008 0009 09:48:15 Msec=3750 True Az=40.995 Ze=52.335 Az status=0008 Ze status=0009 09:48:15 Check angles 09:48:15 SkyScan query 09:48:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:48:15 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:48:15 Message to Master queued w/err=0: serial=60864 error=0 09:48:20 Received message from Master: op=Filter serial=60865 09:48:20 Color wheel filter change from 0 to 0 09:48:20 FLIGetFilterPos err=0 currentPosition=0 09:48:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:48:20 Filter is already there-color wheel unchanged 09:48:21 Received message from Master: op=Shutter serial=60866 09:48:21 Shutter LASER close 09:48:21 Received message from Camera: op=State serial=60868 09:48:21 GetSingleValue result=40 Value=cccccccc 09:48:21 SkyScan query 09:48:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:48:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:21 Parameters OK 09:48:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:21 Set A/D data flow result=40 09:48:21 Set A/D channel type result=40 09:48:21 Set A/D encoding result=40 09:48:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:21 Set channel filter=0.000000e+000 result=40 09:48:21 Config A/D Result=40 09:48:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:21 Get A/D filter: -9.255963e+061 result=40 09:48:21 Get A/D value=-858993460 result=40 09:48:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:21 Parameters OK 09:48:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:21 Set A/D data flow result=40 09:48:21 Set A/D channel type result=40 09:48:21 Set A/D encoding result=40 09:48:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:21 Set channel filter=0.000000e+000 result=40 09:48:21 Config A/D Result=40 09:48:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:21 Get A/D filter: -9.255963e+061 result=40 09:48:21 Get A/D value=-858993460 result=40 09:48:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:48:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:48:21 Aux= 09:48:21 Message to Camera, serial 60868 queued 09:48:58 Received message from Master: op=PointingHead serial=60881 09:48:58 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:48:58 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:48:59 Point started: ret=0 09:48:59 point_skyscan result=0 09:48:59 Check angles 09:48:59 SkyScan query 09:49:00 SkyScan query done: ret=0 az=64.41<-4294 ze=66.555<-7563 Statuses=0009 0008 09:49:00 Msec=0 True Az=64.41 Ze=66.555 Az status=0009 Ze status=0008 09:49:00 Check angles 09:49:00 SkyScan query 09:49:01 SkyScan query done: ret=0 az=81.87<-5458 ze=66.495<-7567 Statuses=0009 0008 09:49:01 Msec=750 True Az=81.87 Ze=66.495 Az status=0009 Ze status=0008 09:49:01 Check angles 09:49:01 SkyScan query 09:49:01 SkyScan query done: ret=0 az=99.39<-6626 ze=66.495<-7567 Statuses=0009 0008 09:49:01 Msec=1500 True Az=99.39 Ze=66.495 Az status=0009 Ze status=0008 09:49:02 Check angles 09:49:02 SkyScan query 09:49:02 SkyScan query done: ret=0 az=116.835<-7789 ze=66.495<-7567 Statuses=0009 0008 09:49:02 Msec=2250 True Az=116.835 Ze=66.495 Az status=0009 Ze status=0008 09:49:02 Check angles 09:49:02 SkyScan query 09:49:03 SkyScan query done: ret=0 az=134.325<-8955 ze=66.495<-7567 Statuses=0009 0008 09:49:03 Msec=3000 True Az=134.325 Ze=66.495 Az status=0009 Ze status=0008 09:49:03 Check angles 09:49:03 SkyScan query 09:49:04 SkyScan query done: ret=0 az=151.695<-10113 ze=66.495<-7567 Statuses=0009 0008 09:49:04 Msec=3750 True Az=151.695 Ze=66.495 Az status=0009 Ze status=0008 09:49:04 Check angles 09:49:04 SkyScan query 09:49:04 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:49:04 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 09:49:04 Message to Master queued w/err=0: serial=60881 error=0 09:49:09 Received message from Master: op=Filter serial=60882 09:49:09 Color wheel filter change from 0 to 0 09:49:09 FLIGetFilterPos err=0 currentPosition=0 09:49:09 FLIGetStepsRemaining err=0 RemainingSteps=0 09:49:09 Filter is already there-color wheel unchanged 09:49:10 Received message from Master: op=Shutter serial=60883 09:49:10 Shutter LASER close 09:49:10 Received message from Camera: op=State serial=60885 09:49:10 GetSingleValue result=40 Value=cccccccc 09:49:10 SkyScan query 09:49:10 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:49:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:10 Parameters OK 09:49:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:10 Set A/D data flow result=40 09:49:10 Set A/D channel type result=40 09:49:10 Set A/D encoding result=40 09:49:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:10 Set channel filter=0.000000e+000 result=40 09:49:10 Config A/D Result=40 09:49:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:10 Get A/D filter: -9.255963e+061 result=40 09:49:10 Get A/D value=-858993460 result=40 09:49:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:10 Parameters OK 09:49:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:10 Set A/D data flow result=40 09:49:10 Set A/D channel type result=40 09:49:10 Set A/D encoding result=40 09:49:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:10 Set channel filter=0.000000e+000 result=40 09:49:10 Config A/D Result=40 09:49:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:10 Get A/D filter: -9.255963e+061 result=40 09:49:10 Get A/D value=-858993460 result=40 09:49:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:10 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:49:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:49:10 Aux= 09:49:10 Message to Camera, serial 60885 queued 09:49:47 Received message from Master: op=PointingHead serial=60898 09:49:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:49:47 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:49:47 Point started: ret=0 09:49:47 point_skyscan result=0 09:49:48 Check angles 09:49:48 SkyScan query 09:49:49 SkyScan query done: ret=0 az=135.06<-9004 ze=36.765<-9549 Statuses=0009 0009 09:49:49 Msec=0 True Az=135.06 Ze=36.765 Az status=0009 Ze status=0009 09:49:49 Check angles 09:49:49 SkyScan query 09:49:49 SkyScan query done: ret=0 az=117.525<-7835 ze=15.81<-10946 Statuses=0009 0009 09:49:49 Msec=750 True Az=117.525 Ze=15.81 Az status=0009 Ze status=0009 09:49:50 Check angles 09:49:50 SkyScan query 09:49:50 SkyScan query done: ret=0 az=100.14<-6676 ze=-5.175<-12345 Statuses=0009 0009 09:49:50 Msec=1500 True Az=100.14 Ze=-5.175 Az status=0009 Ze status=0009 09:49:50 Check angles 09:49:50 SkyScan query 09:49:51 SkyScan query done: ret=0 az=82.665<-5511 ze=-26.115<-13741 Statuses=0009 0009 09:49:51 Msec=2250 True Az=82.665 Ze=-26.115 Az status=0009 Ze status=0009 09:49:51 Check angles 09:49:51 SkyScan query 09:49:52 SkyScan query done: ret=0 az=65.16<-4344 ze=-38.565<-14571 Statuses=0009 0008 09:49:52 Msec=3000 True Az=65.16 Ze=-38.565 Az status=0009 Ze status=0008 09:49:52 Check angles 09:49:52 SkyScan query 09:49:52 SkyScan query done: ret=0 az=47.73<-3182 ze=-38.535<-14569 Statuses=0009 0008 09:49:52 Msec=3750 True Az=47.73 Ze=-38.535 Az status=0009 Ze status=0008 09:49:53 Check angles 09:49:53 SkyScan query 09:49:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:49:53 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:49:53 Message to Master queued w/err=0: serial=60898 error=0 09:49:58 Received message from Master: op=Filter serial=60899 09:49:58 Color wheel filter change from 0 to 0 09:49:58 FLIGetFilterPos err=0 currentPosition=0 09:49:58 FLIGetStepsRemaining err=0 RemainingSteps=0 09:49:58 Filter is already there-color wheel unchanged 09:49:58 Received message from Master: op=Shutter serial=60900 09:49:58 Shutter LASER close 09:49:58 Received message from Camera: op=State serial=60902 09:49:58 GetSingleValue result=40 Value=cccccccc 09:49:58 SkyScan query 09:49:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:49:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:59 Parameters OK 09:49:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:59 Set A/D data flow result=40 09:49:59 Set A/D channel type result=40 09:49:59 Set A/D encoding result=40 09:49:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:59 Set channel filter=0.000000e+000 result=40 09:49:59 Config A/D Result=40 09:49:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:59 Get A/D filter: -9.255963e+061 result=40 09:49:59 Get A/D value=-858993460 result=40 09:49:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:59 Parameters OK 09:49:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:59 Set A/D data flow result=40 09:49:59 Set A/D channel type result=40 09:49:59 Set A/D encoding result=40 09:49:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:59 Set channel filter=0.000000e+000 result=40 09:49:59 Config A/D Result=40 09:49:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:59 Get A/D filter: -9.255963e+061 result=40 09:49:59 Get A/D value=-858993460 result=40 09:49:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:49:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:49:59 Aux= 09:49:59 Message to Camera, serial 60902 queued 09:50:36 Received message from Master: op=PointingHead serial=60915 09:50:36 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:50:36 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:50:36 Point started: ret=0 09:50:36 point_skyscan result=0 09:50:37 Check angles 09:50:37 SkyScan query 09:50:37 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.55<-16570 Statuses=0009 0009 09:50:37 Msec=0 True Az=64.215 Ze=-68.55 Az status=0009 Ze status=0009 09:50:38 Check angles 09:50:38 SkyScan query 09:50:38 SkyScan query done: ret=0 az=81.555<-5437 ze=-89.535<-17969 Statuses=0009 0009 09:50:38 Msec=750 True Az=81.555 Ze=-89.535 Az status=0009 Ze status=0009 09:50:38 Check angles 09:50:38 SkyScan query 09:50:39 SkyScan query done: ret=0 az=99.615<-6641 ze=-110.94<-19396 Statuses=0009 0009 09:50:39 Msec=1500 True Az=99.615 Ze=-110.94 Az status=0009 Ze status=0009 09:50:39 Check angles 09:50:39 SkyScan query 09:50:40 SkyScan query done: ret=0 az=117.495<-7833 ze=-132.3<-20820 Statuses=0009 0009 09:50:40 Msec=2250 True Az=117.495 Ze=-132.3 Az status=0009 Ze status=0009 09:50:40 Check angles 09:50:40 SkyScan query 09:50:41 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 09:50:41 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 09:50:41 Check angles 09:50:41 SkyScan query 09:50:41 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 09:50:41 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 09:50:41 Message to Master queued w/err=0: serial=60915 error=0 09:50:46 Received message from Master: op=Filter serial=60916 09:50:46 Color wheel filter change from 0 to 0 09:50:46 FLIGetFilterPos err=0 currentPosition=0 09:50:46 FLIGetStepsRemaining err=0 RemainingSteps=0 09:50:46 Filter is already there-color wheel unchanged 09:50:46 Received message from Master: op=Shutter serial=60917 09:50:46 Shutter LASER close 09:50:46 Received message from Camera: op=State serial=60919 09:50:46 GetSingleValue result=40 Value=cccccccc 09:50:46 SkyScan query 09:50:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:50:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:47 Parameters OK 09:50:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:47 Set A/D data flow result=40 09:50:47 Set A/D channel type result=40 09:50:47 Set A/D encoding result=40 09:50:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:47 Set channel filter=0.000000e+000 result=40 09:50:47 Config A/D Result=40 09:50:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:47 Get A/D filter: -9.255963e+061 result=40 09:50:47 Get A/D value=-858993460 result=40 09:50:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:47 Parameters OK 09:50:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:47 Set A/D data flow result=40 09:50:47 Set A/D channel type result=40 09:50:47 Set A/D encoding result=40 09:50:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:47 Set channel filter=0.000000e+000 result=40 09:50:47 Config A/D Result=40 09:50:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:47 Get A/D filter: -9.255963e+061 result=40 09:50:47 Get A/D value=-858993460 result=40 09:50:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:50:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:50:47 Aux= 09:50:47 Message to Camera, serial 60919 queued 09:51:23 Received message from Master: op=PointingHead serial=60931 09:51:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:51:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:51:23 Point started: ret=0 09:51:23 point_skyscan result=0 09:51:24 Check angles 09:51:24 SkyScan query 09:51:25 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.255<-23417 Statuses=0009 0009 09:51:25 Msec=0 True Az=113.01 Ze=-171.255 Az status=0009 Ze status=0009 09:51:25 Check angles 09:51:25 SkyScan query 09:51:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:51:25 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:51:25 Message to Master queued w/err=0: serial=60931 error=0 09:51:30 Received message from Master: op=Filter serial=60932 09:51:30 Color wheel filter change from 0 to 0 09:51:30 FLIGetFilterPos err=0 currentPosition=0 09:51:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:51:30 Filter is already there-color wheel unchanged 09:51:31 Received message from Master: op=Shutter serial=60933 09:51:31 Shutter LASER open 09:51:31 Received message from Camera: op=State serial=60935 09:51:31 GetSingleValue result=40 Value=cccccccc 09:51:31 SkyScan query 09:51:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:51:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:31 Parameters OK 09:51:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:31 Set A/D data flow result=40 09:51:31 Set A/D channel type result=40 09:51:31 Set A/D encoding result=40 09:51:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:31 Set channel filter=0.000000e+000 result=40 09:51:31 Config A/D Result=40 09:51:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:31 Get A/D filter: -9.255963e+061 result=40 09:51:31 Get A/D value=-858993460 result=40 09:51:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:31 Parameters OK 09:51:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:31 Set A/D data flow result=40 09:51:31 Set A/D channel type result=40 09:51:31 Set A/D encoding result=40 09:51:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:31 Set channel filter=0.000000e+000 result=40 09:51:31 Config A/D Result=40 09:51:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:31 Get A/D filter: -9.255963e+061 result=40 09:51:31 Get A/D value=-858993460 result=40 09:51:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:51:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:51:31 Aux= 09:51:31 Message to Camera, serial 60935 queued 09:51:40 Received message from Master: op=Shutter serial=60945 09:51:40 Shutter LASER close 09:51:40 Received message from Master: op=PointingHead serial=60949 09:51:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:51:40 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:51:41 Point started: ret=0 09:51:41 point_skyscan result=0 09:51:41 Check angles 09:51:41 SkyScan query 09:51:42 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.22<-21548 Statuses=0009 0009 09:51:42 Msec=0 True Az=135.885 Ze=-143.22 Az status=0009 Ze status=0009 09:51:42 Check angles 09:51:42 SkyScan query 09:51:43 SkyScan query done: ret=0 az=153.405<-10227 ze=-122.28<-20152 Statuses=0009 0009 09:51:43 Msec=750 True Az=153.405 Ze=-122.28 Az status=0009 Ze status=0009 09:51:43 Check angles 09:51:43 SkyScan query 09:51:44 SkyScan query done: ret=0 az=170.82<-11388 ze=-101.415<-18761 Statuses=0009 0009 09:51:44 Msec=1500 True Az=170.82 Ze=-101.415 Az status=0009 Ze status=0009 09:51:44 Check angles 09:51:44 SkyScan query 09:51:44 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.98<-17332 Statuses=0008 0009 09:51:44 Msec=2250 True Az=176.025 Ze=-79.98 Az status=0008 Ze status=0009 09:51:44 Check angles 09:51:44 SkyScan query 09:51:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.965<-15931 Statuses=0008 0009 09:51:45 Msec=3000 True Az=175.995 Ze=-58.965 Az status=0008 Ze status=0009 09:51:45 Check angles 09:51:45 SkyScan query 09:51:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:51:46 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:51:46 Message to Master queued w/err=0: serial=60949 error=0 09:51:51 Received message from Master: op=Filter serial=60950 09:51:51 Color wheel filter change from 0 to 0 09:51:51 FLIGetFilterPos err=0 currentPosition=0 09:51:51 FLIGetStepsRemaining err=0 RemainingSteps=0 09:51:51 Filter is already there-color wheel unchanged 09:51:51 Received message from Master: op=Shutter serial=60951 09:51:51 Shutter LASER close 09:51:51 Received message from Camera: op=State serial=60953 09:51:51 GetSingleValue result=40 Value=cccccccc 09:51:51 SkyScan query 09:51:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:51:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:52 Parameters OK 09:51:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:52 Set A/D data flow result=40 09:51:52 Set A/D channel type result=40 09:51:52 Set A/D encoding result=40 09:51:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:52 Set channel filter=0.000000e+000 result=40 09:51:52 Config A/D Result=40 09:51:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:52 Get A/D filter: -9.255963e+061 result=40 09:51:52 Get A/D value=-858993460 result=40 09:51:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:52 Parameters OK 09:51:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:52 Set A/D data flow result=40 09:51:52 Set A/D channel type result=40 09:51:52 Set A/D encoding result=40 09:51:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:52 Set channel filter=0.000000e+000 result=40 09:51:52 Config A/D Result=40 09:51:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:52 Get A/D filter: -9.255963e+061 result=40 09:51:52 Get A/D value=-858993460 result=40 09:51:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:51:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:51:52 Aux= 09:51:52 Message to Camera, serial 60953 queued 09:52:29 Received message from Master: op=PointingHead serial=60966 09:52:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:52:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:52:29 Point started: ret=0 09:52:29 point_skyscan result=0 09:52:30 Check angles 09:52:30 SkyScan query 09:52:30 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.78<-13452 Statuses=0009 0009 09:52:30 Msec=0 True Az=152.97 Ze=-21.78 Az status=0009 Ze status=0009 09:52:30 Check angles 09:52:30 SkyScan query 09:52:31 SkyScan query done: ret=0 az=135.645<-9043 ze=-0.765<-12051 Statuses=0009 0009 09:52:31 Msec=750 True Az=135.645 Ze=-0.765 Az status=0009 Ze status=0009 09:52:31 Check angles 09:52:31 SkyScan query 09:52:32 SkyScan query done: ret=0 az=118.02<-7868 ze=20.145<-10657 Statuses=0009 0009 09:52:32 Msec=1500 True Az=118.02 Ze=20.145 Az status=0009 Ze status=0009 09:52:32 Check angles 09:52:32 SkyScan query 09:52:32 SkyScan query done: ret=0 az=100.125<-6675 ze=41.565<-9229 Statuses=0009 0009 09:52:32 Msec=2250 True Az=100.125 Ze=41.565 Az status=0009 Ze status=0009 09:52:33 Check angles 09:52:33 SkyScan query 09:52:33 SkyScan query done: ret=0 az=86.055<-5737 ze=51.54<-8564 Statuses=0009 0008 09:52:33 Msec=3000 True Az=86.055 Ze=51.54 Az status=0009 Ze status=0008 09:52:33 Check angles 09:52:33 SkyScan query 09:52:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:52:34 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:52:34 Message to Master queued w/err=0: serial=60966 error=0 09:52:39 Received message from Master: op=Filter serial=60967 09:52:39 Color wheel filter change from 0 to 0 09:52:39 FLIGetFilterPos err=0 currentPosition=0 09:52:39 FLIGetStepsRemaining err=0 RemainingSteps=0 09:52:39 Filter is already there-color wheel unchanged 09:52:39 Received message from Master: op=Shutter serial=60968 09:52:39 Shutter LASER close 09:52:39 Received message from Camera: op=State serial=60970 09:52:39 GetSingleValue result=40 Value=cccccccc 09:52:39 SkyScan query 09:52:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:52:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:40 Parameters OK 09:52:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:40 Set A/D data flow result=40 09:52:40 Set A/D channel type result=40 09:52:40 Set A/D encoding result=40 09:52:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:40 Set channel filter=0.000000e+000 result=40 09:52:40 Config A/D Result=40 09:52:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:40 Get A/D filter: -9.255963e+061 result=40 09:52:40 Get A/D value=-858993460 result=40 09:52:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:40 Parameters OK 09:52:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:40 Set A/D data flow result=40 09:52:40 Set A/D channel type result=40 09:52:40 Set A/D encoding result=40 09:52:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:40 Set channel filter=0.000000e+000 result=40 09:52:40 Config A/D Result=40 09:52:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:40 Get A/D filter: -9.255963e+061 result=40 09:52:40 Get A/D value=-858993460 result=40 09:52:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:52:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:52:40 Aux= 09:52:40 Message to Camera, serial 60970 queued 09:53:16 Received message from Master: op=PointingHead serial=60982 09:53:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:53:16 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:53:16 Point started: ret=0 09:53:16 point_skyscan result=0 09:53:17 Check angles 09:53:17 SkyScan query 09:53:17 SkyScan query done: ret=0 az=109.26<-7284 ze=38.49<-9434 Statuses=0009 0008 09:53:17 Msec=0 True Az=109.26 Ze=38.49 Az status=0009 Ze status=0008 09:53:18 Check angles 09:53:18 SkyScan query 09:53:18 SkyScan query done: ret=0 az=127.065<-8471 ze=38.505<-9433 Statuses=0009 0008 09:53:18 Msec=750 True Az=127.065 Ze=38.505 Az status=0009 Ze status=0008 09:53:18 Check angles 09:53:18 SkyScan query 09:53:19 SkyScan query done: ret=0 az=144.54<-9636 ze=38.505<-9433 Statuses=0009 0008 09:53:19 Msec=1500 True Az=144.54 Ze=38.505 Az status=0009 Ze status=0008 09:53:19 Check angles 09:53:19 SkyScan query 09:53:20 SkyScan query done: ret=0 az=162.06<-10804 ze=38.505<-9433 Statuses=0009 0008 09:53:20 Msec=2250 True Az=162.06 Ze=38.505 Az status=0009 Ze status=0008 09:53:20 Check angles 09:53:20 SkyScan query 09:53:20 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:53:20 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:53:21 Check angles 09:53:21 SkyScan query 09:53:21 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:53:21 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:53:21 Message to Master queued w/err=0: serial=60982 error=0 09:53:26 Received message from Master: op=Filter serial=60983 09:53:26 Color wheel filter change from 0 to 0 09:53:26 FLIGetFilterPos err=0 currentPosition=0 09:53:26 FLIGetStepsRemaining err=0 RemainingSteps=0 09:53:26 Filter is already there-color wheel unchanged 09:53:26 Received message from Master: op=Shutter serial=60984 09:53:26 Shutter LASER close 09:53:26 Received message from Camera: op=State serial=60986 09:53:26 GetSingleValue result=40 Value=cccccccc 09:53:26 SkyScan query 09:53:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:53:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:27 Parameters OK 09:53:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:27 Set A/D data flow result=40 09:53:27 Set A/D channel type result=40 09:53:27 Set A/D encoding result=40 09:53:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:27 Set channel filter=0.000000e+000 result=40 09:53:27 Config A/D Result=40 09:53:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:27 Get A/D filter: -9.255963e+061 result=40 09:53:27 Get A/D value=-858993460 result=40 09:53:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:27 Parameters OK 09:53:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:27 Set A/D data flow result=40 09:53:27 Set A/D channel type result=40 09:53:27 Set A/D encoding result=40 09:53:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:27 Set channel filter=0.000000e+000 result=40 09:53:27 Config A/D Result=40 09:53:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:27 Get A/D filter: -9.255963e+061 result=40 09:53:27 Get A/D value=-858993460 result=40 09:53:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:53:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:53:27 Aux= 09:53:27 Message to Camera, serial 60986 queued 09:54:04 Received message from Master: op=PointingHead serial=60999 09:54:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:54:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:54:04 Point started: ret=0 09:54:04 point_skyscan result=0 09:54:05 Check angles 09:54:05 SkyScan query 09:54:05 SkyScan query done: ret=0 az=152.775<-10185 ze=8.43<-11438 Statuses=0009 0009 09:54:05 Msec=0 True Az=152.775 Ze=8.43 Az status=0009 Ze status=0009 09:54:06 Check angles 09:54:06 SkyScan query 09:54:06 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.48<-12832 Statuses=0009 0009 09:54:06 Msec=750 True Az=135.435 Ze=-12.48 Az status=0009 Ze status=0009 09:54:06 Check angles 09:54:06 SkyScan query 09:54:07 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.45<-14230 Statuses=0009 0009 09:54:07 Msec=1500 True Az=117.795 Ze=-33.45 Az status=0009 Ze status=0009 09:54:07 Check angles 09:54:07 SkyScan query 09:54:08 SkyScan query done: ret=0 az=100.29<-6686 ze=-51.54<-15436 Statuses=0009 0009 09:54:08 Msec=2250 True Az=100.29 Ze=-51.54 Az status=0009 Ze status=0009 09:54:08 Check angles 09:54:08 SkyScan query 09:54:08 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 09:54:08 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 09:54:09 Check angles 09:54:09 SkyScan query 09:54:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:54:09 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:54:09 Message to Master queued w/err=0: serial=60999 error=0 09:54:14 Received message from Master: op=Filter serial=61000 09:54:14 Color wheel filter change from 0 to 0 09:54:14 FLIGetFilterPos err=0 currentPosition=0 09:54:14 FLIGetStepsRemaining err=0 RemainingSteps=0 09:54:14 Filter is already there-color wheel unchanged 09:54:14 Received message from Master: op=Shutter serial=61001 09:54:14 Shutter LASER close 09:54:14 Received message from Camera: op=State serial=61003 09:54:14 GetSingleValue result=40 Value=cccccccc 09:54:14 SkyScan query 09:54:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:54:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:15 Parameters OK 09:54:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:15 Set A/D data flow result=40 09:54:15 Set A/D channel type result=40 09:54:15 Set A/D encoding result=40 09:54:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:15 Set channel filter=0.000000e+000 result=40 09:54:15 Config A/D Result=40 09:54:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:15 Get A/D filter: -9.255963e+061 result=40 09:54:15 Get A/D value=-858993460 result=40 09:54:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:15 Parameters OK 09:54:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:15 Set A/D data flow result=40 09:54:15 Set A/D channel type result=40 09:54:15 Set A/D encoding result=40 09:54:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:15 Set channel filter=0.000000e+000 result=40 09:54:15 Config A/D Result=40 09:54:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:15 Get A/D filter: -9.255963e+061 result=40 09:54:15 Get A/D value=-858993460 result=40 09:54:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:54:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:54:15 Aux= 09:54:15 Message to Camera, serial 61003 queued 09:54:52 Received message from Master: op=PointingHead serial=61016 09:54:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:54:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:54:52 Point started: ret=0 09:54:52 point_skyscan result=0 09:54:53 Check angles 09:54:53 SkyScan query 09:54:53 SkyScan query done: ret=0 az=109.215<-7281 ze=-81.495<-17433 Statuses=0009 0009 09:54:53 Msec=0 True Az=109.215 Ze=-81.495 Az status=0009 Ze status=0009 09:54:54 Check angles 09:54:54 SkyScan query 09:54:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.435<-18829 Statuses=0008 0009 09:54:54 Msec=750 True Az=112.995 Ze=-102.435 Az status=0008 Ze status=0009 09:54:54 Check angles 09:54:54 SkyScan query 09:54:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.39<-20226 Statuses=0008 0009 09:54:55 Msec=1500 True Az=112.995 Ze=-123.39 Az status=0008 Ze status=0009 09:54:55 Check angles 09:54:55 SkyScan query 09:54:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.345<-21623 Statuses=0008 0009 09:54:56 Msec=2250 True Az=112.995 Ze=-144.345 Az status=0008 Ze status=0009 09:54:56 Check angles 09:54:56 SkyScan query 09:54:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.285<-23019 Statuses=0008 0009 09:54:56 Msec=3000 True Az=112.995 Ze=-165.285 Az status=0008 Ze status=0009 09:54:57 Check angles 09:54:57 SkyScan query 09:54:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:54:57 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:54:57 Message to Master queued w/err=0: serial=61016 error=0 09:55:02 Received message from Master: op=Filter serial=61017 09:55:02 Color wheel filter change from 0 to 0 09:55:02 FLIGetFilterPos err=0 currentPosition=0 09:55:02 FLIGetStepsRemaining err=0 RemainingSteps=0 09:55:02 Filter is already there-color wheel unchanged 09:55:02 Received message from Master: op=Shutter serial=61018 09:55:02 Shutter LASER open 09:55:03 Received message from Camera: op=State serial=61020 09:55:03 GetSingleValue result=40 Value=cccccccc 09:55:03 SkyScan query 09:55:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:55:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:03 Parameters OK 09:55:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:03 Set A/D data flow result=40 09:55:03 Set A/D channel type result=40 09:55:03 Set A/D encoding result=40 09:55:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:03 Set channel filter=0.000000e+000 result=40 09:55:03 Config A/D Result=40 09:55:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:03 Get A/D filter: -9.255963e+061 result=40 09:55:03 Get A/D value=-858993460 result=40 09:55:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:03 Parameters OK 09:55:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:03 Set A/D data flow result=40 09:55:03 Set A/D channel type result=40 09:55:03 Set A/D encoding result=40 09:55:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:03 Set channel filter=0.000000e+000 result=40 09:55:03 Config A/D Result=40 09:55:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:03 Get A/D filter: -9.255963e+061 result=40 09:55:03 Get A/D value=-858993460 result=40 09:55:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:55:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:55:03 Aux= 09:55:03 Message to Camera, serial 61020 queued 09:55:12 Received message from Master: op=Shutter serial=61030 09:55:12 Shutter LASER close 09:55:12 Received message from Master: op=PointingHead serial=61034 09:55:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:55:12 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:55:12 Point started: ret=0 09:55:12 point_skyscan result=0 09:55:13 Check angles 09:55:13 SkyScan query 09:55:14 SkyScan query done: ret=0 az=90.135<-6009 ze=157.5<-1500 Statuses=0009 0009 09:55:14 Msec=0 True Az=90.135 Ze=157.5 Az status=0009 Ze status=0009 09:55:14 Check angles 09:55:14 SkyScan query 09:55:15 SkyScan query done: ret=0 az=72.645<-4843 ze=136.5<-2900 Statuses=0009 0009 09:55:15 Msec=750 True Az=72.645 Ze=136.5 Az status=0009 Ze status=0009 09:55:15 Check angles 09:55:15 SkyScan query 09:55:15 SkyScan query done: ret=0 az=55.215<-3681 ze=115.605<-4293 Statuses=0009 0009 09:55:15 Msec=1500 True Az=55.215 Ze=115.605 Az status=0009 Ze status=0009 09:55:15 Check angles 09:55:15 SkyScan query 09:55:16 SkyScan query done: ret=0 az=40.875<-2725 ze=94.155<-5723 Statuses=0009 0009 09:55:16 Msec=2250 True Az=40.875 Ze=94.155 Az status=0009 Ze status=0009 09:55:16 Check angles 09:55:16 SkyScan query 09:55:17 SkyScan query done: ret=0 az=40.995<-2733 ze=73.2<-7120 Statuses=0008 0009 09:55:17 Msec=3000 True Az=40.995 Ze=73.2 Az status=0008 Ze status=0009 09:55:17 Check angles 09:55:17 SkyScan query 09:55:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.695<-8487 Statuses=0008 0009 09:55:18 Msec=3750 True Az=40.995 Ze=52.695 Az status=0008 Ze status=0009 09:55:18 Check angles 09:55:18 SkyScan query 09:55:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:55:18 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:55:18 Message to Master queued w/err=0: serial=61034 error=0 09:55:23 Received message from Master: op=Filter serial=61035 09:55:23 Color wheel filter change from 0 to 0 09:55:23 FLIGetFilterPos err=0 currentPosition=0 09:55:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:55:23 Filter is already there-color wheel unchanged 09:55:23 Received message from Master: op=Shutter serial=61036 09:55:23 Shutter LASER close 09:55:24 Received message from Camera: op=State serial=61038 09:55:24 GetSingleValue result=40 Value=cccccccc 09:55:24 SkyScan query 09:55:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:55:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:24 Parameters OK 09:55:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:24 Set A/D data flow result=40 09:55:24 Set A/D channel type result=40 09:55:24 Set A/D encoding result=40 09:55:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:24 Set channel filter=0.000000e+000 result=40 09:55:24 Config A/D Result=40 09:55:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:24 Get A/D filter: -9.255963e+061 result=40 09:55:24 Get A/D value=-858993460 result=40 09:55:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:24 Parameters OK 09:55:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:24 Set A/D data flow result=40 09:55:24 Set A/D channel type result=40 09:55:24 Set A/D encoding result=40 09:55:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:24 Set channel filter=0.000000e+000 result=40 09:55:24 Config A/D Result=40 09:55:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:24 Get A/D filter: -9.255963e+061 result=40 09:55:24 Get A/D value=-858993460 result=40 09:55:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:55:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:55:24 Aux= 09:55:24 Message to Camera, serial 61038 queued [UTC 2018-12-11 09:55:54] 09:56:01 Received message from Master: op=PointingHead serial=61051 09:56:01 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:56:01 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:56:01 Point started: ret=0 09:56:01 point_skyscan result=0 09:56:02 Check angles 09:56:02 SkyScan query 09:56:03 SkyScan query done: ret=0 az=64.425<-4295 ze=66.555<-7563 Statuses=0009 0008 09:56:03 Msec=0 True Az=64.425 Ze=66.555 Az status=0009 Ze status=0008 09:56:03 Check angles 09:56:03 SkyScan query 09:56:03 SkyScan query done: ret=0 az=81.765<-5451 ze=66.495<-7567 Statuses=0009 0008 09:56:03 Msec=750 True Az=81.765 Ze=66.495 Az status=0009 Ze status=0008 09:56:04 Check angles 09:56:04 SkyScan query 09:56:04 SkyScan query done: ret=0 az=99.405<-6627 ze=66.495<-7567 Statuses=0009 0008 09:56:04 Msec=1500 True Az=99.405 Ze=66.495 Az status=0009 Ze status=0008 09:56:04 Check angles 09:56:04 SkyScan query 09:56:05 SkyScan query done: ret=0 az=116.985<-7799 ze=66.495<-7567 Statuses=0009 0008 09:56:05 Msec=2250 True Az=116.985 Ze=66.495 Az status=0009 Ze status=0008 09:56:05 Check angles 09:56:05 SkyScan query 09:56:06 SkyScan query done: ret=0 az=134.415<-8961 ze=66.495<-7567 Statuses=0009 0008 09:56:06 Msec=3000 True Az=134.415 Ze=66.495 Az status=0009 Ze status=0008 09:56:06 Check angles 09:56:06 SkyScan query 09:56:06 SkyScan query done: ret=0 az=151.845<-10123 ze=66.495<-7567 Statuses=0009 0008 09:56:06 Msec=3750 True Az=151.845 Ze=66.495 Az status=0009 Ze status=0008 09:56:07 Check angles 09:56:07 SkyScan query 09:56:07 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:56:07 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 09:56:07 Message to Master queued w/err=0: serial=61051 error=0 09:56:12 Received message from Master: op=Filter serial=61052 09:56:12 Color wheel filter change from 0 to 0 09:56:12 FLIGetFilterPos err=0 currentPosition=0 09:56:12 FLIGetStepsRemaining err=0 RemainingSteps=0 09:56:12 Filter is already there-color wheel unchanged 09:56:12 Received message from Master: op=Shutter serial=61053 09:56:12 Shutter LASER close 09:56:12 Received message from Camera: op=State serial=61055 09:56:12 GetSingleValue result=40 Value=cccccccc 09:56:12 SkyScan query 09:56:13 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:56:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:13 Parameters OK 09:56:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:13 Set A/D data flow result=40 09:56:13 Set A/D channel type result=40 09:56:13 Set A/D encoding result=40 09:56:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:13 Set channel filter=0.000000e+000 result=40 09:56:13 Config A/D Result=40 09:56:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:13 Get A/D filter: -9.255963e+061 result=40 09:56:13 Get A/D value=-858993460 result=40 09:56:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:13 Parameters OK 09:56:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:13 Set A/D data flow result=40 09:56:13 Set A/D channel type result=40 09:56:13 Set A/D encoding result=40 09:56:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:13 Set channel filter=0.000000e+000 result=40 09:56:13 Config A/D Result=40 09:56:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:13 Get A/D filter: -9.255963e+061 result=40 09:56:13 Get A/D value=-858993460 result=40 09:56:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:13 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:56:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:56:13 Aux= 09:56:13 Message to Camera, serial 61055 queued 09:56:50 Received message from Master: op=PointingHead serial=61068 09:56:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:56:50 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:56:50 Point started: ret=0 09:56:50 point_skyscan result=0 09:56:51 Check angles 09:56:51 SkyScan query 09:56:52 SkyScan query done: ret=0 az=134.595<-8973 ze=36.24<-9584 Statuses=0009 0009 09:56:52 Msec=0 True Az=134.595 Ze=36.24 Az status=0009 Ze status=0009 09:56:52 Check angles 09:56:52 SkyScan query 09:56:52 SkyScan query done: ret=0 az=117.09<-7806 ze=15.33<-10978 Statuses=0009 0009 09:56:52 Msec=750 True Az=117.09 Ze=15.33 Az status=0009 Ze status=0009 09:56:52 Check angles 09:56:52 SkyScan query 09:56:53 SkyScan query done: ret=0 az=99.39<-6626 ze=-6.105<-12407 Statuses=0009 0009 09:56:53 Msec=1500 True Az=99.39 Ze=-6.105 Az status=0009 Ze status=0009 09:56:53 Check angles 09:56:53 SkyScan query 09:56:54 SkyScan query done: ret=0 az=81.93<-5462 ze=-27.075<-13805 Statuses=0009 0009 09:56:54 Msec=2250 True Az=81.93 Ze=-27.075 Az status=0009 Ze status=0009 09:56:54 Check angles 09:56:54 SkyScan query 09:56:55 SkyScan query done: ret=0 az=64.35<-4290 ze=-38.565<-14571 Statuses=0009 0008 09:56:55 Msec=3000 True Az=64.35 Ze=-38.565 Az status=0009 Ze status=0008 09:56:55 Check angles 09:56:55 SkyScan query 09:56:55 SkyScan query done: ret=0 az=46.98<-3132 ze=-38.535<-14569 Statuses=0009 0008 09:56:55 Msec=3750 True Az=46.98 Ze=-38.535 Az status=0009 Ze status=0008 09:56:55 Check angles 09:56:55 SkyScan query 09:56:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:56:56 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:56:56 Message to Master queued w/err=0: serial=61068 error=0 09:57:01 Received message from Master: op=Filter serial=61069 09:57:01 Color wheel filter change from 0 to 0 09:57:01 FLIGetFilterPos err=0 currentPosition=0 09:57:01 FLIGetStepsRemaining err=0 RemainingSteps=0 09:57:01 Filter is already there-color wheel unchanged 09:57:01 Received message from Master: op=Shutter serial=61070 09:57:01 Shutter LASER close 09:57:01 Received message from Camera: op=State serial=61072 09:57:01 GetSingleValue result=40 Value=cccccccc 09:57:01 SkyScan query 09:57:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:57:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:02 Parameters OK 09:57:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:02 Set A/D data flow result=40 09:57:02 Set A/D channel type result=40 09:57:02 Set A/D encoding result=40 09:57:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:02 Set channel filter=0.000000e+000 result=40 09:57:02 Config A/D Result=40 09:57:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:02 Get A/D filter: -9.255963e+061 result=40 09:57:02 Get A/D value=-858993460 result=40 09:57:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:02 Parameters OK 09:57:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:02 Set A/D data flow result=40 09:57:02 Set A/D channel type result=40 09:57:02 Set A/D encoding result=40 09:57:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:02 Set channel filter=0.000000e+000 result=40 09:57:02 Config A/D Result=40 09:57:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:02 Get A/D filter: -9.255963e+061 result=40 09:57:02 Get A/D value=-858993460 result=40 09:57:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:57:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:57:02 Aux= 09:57:02 Message to Camera, serial 61072 queued 09:57:39 Received message from Master: op=PointingHead serial=61085 09:57:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:57:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:57:39 Point started: ret=0 09:57:39 point_skyscan result=0 09:57:40 Check angles 09:57:40 SkyScan query 09:57:40 SkyScan query done: ret=0 az=64.44<-4296 ze=-68.91<-16594 Statuses=0009 0009 09:57:40 Msec=0 True Az=64.44 Ze=-68.91 Az status=0009 Ze status=0009 09:57:41 Check angles 09:57:41 SkyScan query 09:57:41 SkyScan query done: ret=0 az=82.275<-5485 ze=-90.24<-18016 Statuses=0009 0009 09:57:41 Msec=750 True Az=82.275 Ze=-90.24 Az status=0009 Ze status=0009 09:57:41 Check angles 09:57:41 SkyScan query 09:57:42 SkyScan query done: ret=0 az=99.855<-6657 ze=-111.18<-19412 Statuses=0009 0009 09:57:42 Msec=1500 True Az=99.855 Ze=-111.18 Az status=0009 Ze status=0009 09:57:42 Check angles 09:57:42 SkyScan query 09:57:43 SkyScan query done: ret=0 az=117.33<-7822 ze=-132.105<-20807 Statuses=0009 0009 09:57:43 Msec=2250 True Az=117.33 Ze=-132.105 Az status=0009 Ze status=0009 09:57:43 Check angles 09:57:43 SkyScan query 09:57:43 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 09:57:43 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 09:57:44 Check angles 09:57:44 SkyScan query 09:57:44 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 09:57:44 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 09:57:44 Message to Master queued w/err=0: serial=61085 error=0 09:57:49 Received message from Master: op=Filter serial=61086 09:57:49 Color wheel filter change from 0 to 0 09:57:49 FLIGetFilterPos err=0 currentPosition=0 09:57:49 FLIGetStepsRemaining err=0 RemainingSteps=0 09:57:49 Filter is already there-color wheel unchanged 09:57:49 Received message from Master: op=Shutter serial=61087 09:57:49 Shutter LASER close 09:57:49 Received message from Camera: op=State serial=61089 09:57:49 GetSingleValue result=40 Value=cccccccc 09:57:49 SkyScan query 09:57:50 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:57:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:50 Parameters OK 09:57:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:50 Set A/D data flow result=40 09:57:50 Set A/D channel type result=40 09:57:50 Set A/D encoding result=40 09:57:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:50 Set channel filter=0.000000e+000 result=40 09:57:50 Config A/D Result=40 09:57:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:50 Get A/D filter: -9.255963e+061 result=40 09:57:50 Get A/D value=-858993460 result=40 09:57:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:50 Parameters OK 09:57:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:50 Set A/D data flow result=40 09:57:50 Set A/D channel type result=40 09:57:50 Set A/D encoding result=40 09:57:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:50 Set channel filter=0.000000e+000 result=40 09:57:50 Config A/D Result=40 09:57:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:50 Get A/D filter: -9.255963e+061 result=40 09:57:50 Get A/D value=-858993460 result=40 09:57:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:50 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:57:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:57:50 Aux= 09:57:50 Message to Camera, serial 61089 queued 09:58:27 Received message from Master: op=PointingHead serial=61102 09:58:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:58:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:58:27 Point started: ret=0 09:58:27 point_skyscan result=0 09:58:28 Check angles 09:58:28 SkyScan query 09:58:28 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.255<-23417 Statuses=0009 0009 09:58:28 Msec=0 True Az=113.01 Ze=-171.255 Az status=0009 Ze status=0009 09:58:29 Check angles 09:58:29 SkyScan query 09:58:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:58:29 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:58:29 Message to Master queued w/err=0: serial=61102 error=0 09:58:34 Received message from Master: op=Filter serial=61103 09:58:34 Color wheel filter change from 0 to 0 09:58:34 FLIGetFilterPos err=0 currentPosition=0 09:58:34 FLIGetStepsRemaining err=0 RemainingSteps=0 09:58:34 Filter is already there-color wheel unchanged 09:58:34 Received message from Master: op=Shutter serial=61104 09:58:34 Shutter LASER open 09:58:35 Received message from Camera: op=State serial=61106 09:58:35 GetSingleValue result=40 Value=cccccccc 09:58:35 SkyScan query 09:58:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:58:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:35 Parameters OK 09:58:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:35 Set A/D data flow result=40 09:58:35 Set A/D channel type result=40 09:58:35 Set A/D encoding result=40 09:58:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:35 Set channel filter=0.000000e+000 result=40 09:58:35 Config A/D Result=40 09:58:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:35 Get A/D filter: -9.255963e+061 result=40 09:58:35 Get A/D value=-858993460 result=40 09:58:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:35 Parameters OK 09:58:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:35 Set A/D data flow result=40 09:58:35 Set A/D channel type result=40 09:58:35 Set A/D encoding result=40 09:58:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:35 Set channel filter=0.000000e+000 result=40 09:58:35 Config A/D Result=40 09:58:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:35 Get A/D filter: -9.255963e+061 result=40 09:58:35 Get A/D value=-858993460 result=40 09:58:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:58:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:58:35 Aux= 09:58:35 Message to Camera, serial 61106 queued 09:58:44 Received message from Master: op=Shutter serial=61116 09:58:44 Shutter LASER close 09:58:44 Received message from Master: op=PointingHead serial=61120 09:58:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:58:44 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:58:45 Point started: ret=0 09:58:45 point_skyscan result=0 09:58:45 Check angles 09:58:45 SkyScan query 09:58:46 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.355<-21557 Statuses=0009 0009 09:58:46 Msec=0 True Az=135.84 Ze=-143.355 Az status=0009 Ze status=0009 09:58:46 Check angles 09:58:46 SkyScan query 09:58:47 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.385<-20159 Statuses=0009 0009 09:58:47 Msec=750 True Az=153.36 Ze=-122.385 Az status=0009 Ze status=0009 09:58:47 Check angles 09:58:47 SkyScan query 09:58:47 SkyScan query done: ret=0 az=170.79<-11386 ze=-101.505<-18767 Statuses=0009 0009 09:58:47 Msec=1500 True Az=170.79 Ze=-101.505 Az status=0009 Ze status=0009 09:58:48 Check angles 09:58:48 SkyScan query 09:58:48 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.1<-17340 Statuses=0008 0009 09:58:48 Msec=2250 True Az=176.025 Ze=-80.1 Az status=0008 Ze status=0009 09:58:48 Check angles 09:58:48 SkyScan query 09:58:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.115<-15941 Statuses=0008 0009 09:58:49 Msec=3000 True Az=175.995 Ze=-59.115 Az status=0008 Ze status=0009 09:58:49 Check angles 09:58:49 SkyScan query 09:58:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:58:50 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:58:50 Message to Master queued w/err=0: serial=61120 error=0 09:58:55 Received message from Master: op=Filter serial=61121 09:58:55 Color wheel filter change from 0 to 0 09:58:55 FLIGetFilterPos err=0 currentPosition=0 09:58:55 FLIGetStepsRemaining err=0 RemainingSteps=0 09:58:55 Filter is already there-color wheel unchanged 09:58:55 Received message from Master: op=Shutter serial=61122 09:58:55 Shutter LASER close 09:58:55 Received message from Camera: op=State serial=61124 09:58:55 GetSingleValue result=40 Value=cccccccc 09:58:55 SkyScan query 09:58:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:58:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:56 Parameters OK 09:58:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:56 Set A/D data flow result=40 09:58:56 Set A/D channel type result=40 09:58:56 Set A/D encoding result=40 09:58:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:56 Set channel filter=0.000000e+000 result=40 09:58:56 Config A/D Result=40 09:58:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:56 Get A/D filter: -9.255963e+061 result=40 09:58:56 Get A/D value=-858993460 result=40 09:58:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:56 Parameters OK 09:58:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:56 Set A/D data flow result=40 09:58:56 Set A/D channel type result=40 09:58:56 Set A/D encoding result=40 09:58:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:56 Set channel filter=0.000000e+000 result=40 09:58:56 Config A/D Result=40 09:58:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:56 Get A/D filter: -9.255963e+061 result=40 09:58:56 Get A/D value=-858993460 result=40 09:58:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:58:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:58:56 Aux= 09:58:56 Message to Camera, serial 61124 queued 09:59:32 Received message from Master: op=PointingHead serial=61137 09:59:32 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:59:32 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:59:33 Point started: ret=0 09:59:33 point_skyscan result=0 09:59:33 Check angles 09:59:33 SkyScan query 09:59:34 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.465<-13431 Statuses=0009 0009 09:59:34 Msec=0 True Az=152.775 Ze=-21.465 Az status=0009 Ze status=0009 09:59:34 Check angles 09:59:34 SkyScan query 09:59:35 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.465<-12031 Statuses=0009 0009 09:59:35 Msec=750 True Az=135.375 Ze=-0.465 Az status=0009 Ze status=0009 09:59:35 Check angles 09:59:35 SkyScan query 09:59:36 SkyScan query done: ret=0 az=117.765<-7851 ze=20.475<-10635 Statuses=0009 0009 09:59:36 Msec=1500 True Az=117.765 Ze=20.475 Az status=0009 Ze status=0009 09:59:36 Check angles 09:59:36 SkyScan query 09:59:36 SkyScan query done: ret=0 az=100.29<-6686 ze=41.475<-9235 Statuses=0009 0009 09:59:36 Msec=2250 True Az=100.29 Ze=41.475 Az status=0009 Ze status=0009 09:59:36 Check angles 09:59:36 SkyScan query 09:59:37 SkyScan query done: ret=0 az=86.04<-5736 ze=51.555<-8563 Statuses=0009 0008 09:59:37 Msec=3000 True Az=86.04 Ze=51.555 Az status=0009 Ze status=0008 09:59:37 Check angles 09:59:37 SkyScan query 09:59:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:59:38 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:59:38 Message to Master queued w/err=0: serial=61137 error=0 09:59:43 Received message from Master: op=Filter serial=61138 09:59:43 Color wheel filter change from 0 to 0 09:59:43 FLIGetFilterPos err=0 currentPosition=0 09:59:43 FLIGetStepsRemaining err=0 RemainingSteps=0 09:59:43 Filter is already there-color wheel unchanged 09:59:43 Received message from Master: op=Shutter serial=61139 09:59:43 Shutter LASER close 09:59:43 Received message from Camera: op=State serial=61141 09:59:43 GetSingleValue result=40 Value=cccccccc 09:59:43 SkyScan query 09:59:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:59:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:44 Parameters OK 09:59:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:44 Set A/D data flow result=40 09:59:44 Set A/D channel type result=40 09:59:44 Set A/D encoding result=40 09:59:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:44 Set channel filter=0.000000e+000 result=40 09:59:44 Config A/D Result=40 09:59:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:44 Get A/D filter: -9.255963e+061 result=40 09:59:44 Get A/D value=-858993460 result=40 09:59:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:44 Parameters OK 09:59:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:44 Set A/D data flow result=40 09:59:44 Set A/D channel type result=40 09:59:44 Set A/D encoding result=40 09:59:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:44 Set channel filter=0.000000e+000 result=40 09:59:44 Config A/D Result=40 09:59:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:44 Get A/D filter: -9.255963e+061 result=40 09:59:44 Get A/D value=-858993460 result=40 09:59:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:59:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:59:44 Aux= 09:59:44 Message to Camera, serial 61141 queued 10:00:20 Received message from Master: op=PointingHead serial=61154 10:00:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:00:20 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:00:21 Point started: ret=0 10:00:21 point_skyscan result=0 10:00:22 Check angles 10:00:22 SkyScan query 10:00:22 SkyScan query done: ret=0 az=109.215<-7281 ze=38.49<-9434 Statuses=0009 0008 10:00:22 Msec=0 True Az=109.215 Ze=38.49 Az status=0009 Ze status=0008 10:00:22 Check angles 10:00:22 SkyScan query 10:00:23 SkyScan query done: ret=0 az=126.765<-8451 ze=38.505<-9433 Statuses=0009 0008 10:00:23 Msec=750 True Az=126.765 Ze=38.505 Az status=0009 Ze status=0008 10:00:23 Check angles 10:00:23 SkyScan query 10:00:24 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 10:00:24 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 10:00:24 Check angles 10:00:24 SkyScan query 10:00:24 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 10:00:24 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 10:00:25 Check angles 10:00:25 SkyScan query 10:00:25 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 10:00:25 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 10:00:25 Check angles 10:00:25 SkyScan query 10:00:26 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:00:26 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:00:26 Message to Master queued w/err=0: serial=61154 error=0 10:00:31 Received message from Master: op=Filter serial=61155 10:00:31 Color wheel filter change from 0 to 0 10:00:31 FLIGetFilterPos err=0 currentPosition=0 10:00:31 FLIGetStepsRemaining err=0 RemainingSteps=0 10:00:31 Filter is already there-color wheel unchanged 10:00:31 Received message from Master: op=Shutter serial=61156 10:00:31 Shutter LASER close 10:00:31 Received message from Camera: op=State serial=61158 10:00:31 GetSingleValue result=40 Value=cccccccc 10:00:31 SkyScan query 10:00:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:00:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:32 Parameters OK 10:00:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:32 Set A/D data flow result=40 10:00:32 Set A/D channel type result=40 10:00:32 Set A/D encoding result=40 10:00:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:32 Set channel filter=0.000000e+000 result=40 10:00:32 Config A/D Result=40 10:00:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:32 Get A/D filter: -9.255963e+061 result=40 10:00:32 Get A/D value=-858993460 result=40 10:00:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:32 Parameters OK 10:00:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:32 Set A/D data flow result=40 10:00:32 Set A/D channel type result=40 10:00:32 Set A/D encoding result=40 10:00:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:32 Set channel filter=0.000000e+000 result=40 10:00:32 Config A/D Result=40 10:00:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:32 Get A/D filter: -9.255963e+061 result=40 10:00:32 Get A/D value=-858993460 result=40 10:00:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:00:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:00:32 Aux= 10:00:32 Message to Camera, serial 61158 queued 10:01:09 Received message from Master: op=PointingHead serial=61171 10:01:09 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:01:09 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:01:09 Point started: ret=0 10:01:09 point_skyscan result=0 10:01:10 Check angles 10:01:10 SkyScan query 10:01:10 SkyScan query done: ret=0 az=152.955<-10197 ze=8.715<-11419 Statuses=0009 0009 10:01:10 Msec=0 True Az=152.955 Ze=8.715 Az status=0009 Ze status=0009 10:01:10 Check angles 10:01:10 SkyScan query 10:01:11 SkyScan query done: ret=0 az=135.66<-9044 ze=-12.24<-12816 Statuses=0009 0009 10:01:11 Msec=750 True Az=135.66 Ze=-12.24 Az status=0009 Ze status=0009 10:01:11 Check angles 10:01:11 SkyScan query 10:01:12 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.165<-14211 Statuses=0009 0009 10:01:12 Msec=1500 True Az=118.02 Ze=-33.165 Az status=0009 Ze status=0009 10:01:12 Check angles 10:01:12 SkyScan query 10:01:12 SkyScan query done: ret=0 az=100.155<-6677 ze=-51.555<-15437 Statuses=0009 0009 10:01:12 Msec=2250 True Az=100.155 Ze=-51.555 Az status=0009 Ze status=0009 10:01:13 Check angles 10:01:13 SkyScan query 10:01:13 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 10:01:13 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 10:01:13 Check angles 10:01:13 SkyScan query 10:01:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:01:14 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:01:14 Message to Master queued w/err=0: serial=61171 error=0 10:01:19 Received message from Master: op=Filter serial=61172 10:01:19 Color wheel filter change from 0 to 0 10:01:19 FLIGetFilterPos err=0 currentPosition=0 10:01:19 FLIGetStepsRemaining err=0 RemainingSteps=0 10:01:19 Filter is already there-color wheel unchanged 10:01:19 Received message from Master: op=Shutter serial=61173 10:01:19 Shutter LASER close 10:01:19 Received message from Camera: op=State serial=61175 10:01:19 GetSingleValue result=40 Value=cccccccc 10:01:19 SkyScan query 10:01:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:01:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:20 Parameters OK 10:01:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:20 Set A/D data flow result=40 10:01:20 Set A/D channel type result=40 10:01:20 Set A/D encoding result=40 10:01:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:20 Set channel filter=0.000000e+000 result=40 10:01:20 Config A/D Result=40 10:01:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:20 Get A/D filter: -9.255963e+061 result=40 10:01:20 Get A/D value=-858993460 result=40 10:01:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:20 Parameters OK 10:01:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:20 Set A/D data flow result=40 10:01:20 Set A/D channel type result=40 10:01:20 Set A/D encoding result=40 10:01:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:20 Set channel filter=0.000000e+000 result=40 10:01:20 Config A/D Result=40 10:01:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:20 Get A/D filter: -9.255963e+061 result=40 10:01:20 Get A/D value=-858993460 result=40 10:01:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:01:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:01:20 Aux= 10:01:20 Message to Camera, serial 61175 queued 10:01:57 Received message from Master: op=PointingHead serial=61188 10:01:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:01:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:01:57 Point started: ret=0 10:01:57 point_skyscan result=0 10:01:58 Check angles 10:01:58 SkyScan query 10:01:58 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.39<-17426 Statuses=0009 0009 10:01:58 Msec=0 True Az=109.185 Ze=-81.39 Az status=0009 Ze status=0009 10:01:58 Check angles 10:01:58 SkyScan query 10:01:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.795<-18853 Statuses=0008 0009 10:01:59 Msec=750 True Az=112.995 Ze=-102.795 Az status=0008 Ze status=0009 10:01:59 Check angles 10:01:59 SkyScan query 10:02:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.75<-20250 Statuses=0008 0009 10:02:00 Msec=1500 True Az=112.995 Ze=-123.75 Az status=0008 Ze status=0009 10:02:00 Check angles 10:02:00 SkyScan query 10:02:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.69<-21646 Statuses=0008 0009 10:02:01 Msec=2250 True Az=112.995 Ze=-144.69 Az status=0008 Ze status=0009 10:02:01 Check angles 10:02:01 SkyScan query 10:02:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.66<-23044 Statuses=0008 0009 10:02:01 Msec=3000 True Az=112.995 Ze=-165.66 Az status=0008 Ze status=0009 10:02:01 Check angles 10:02:01 SkyScan query 10:02:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:02:02 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:02:02 Message to Master queued w/err=0: serial=61188 error=0 10:02:07 Received message from Master: op=Filter serial=61189 10:02:07 Color wheel filter change from 0 to 0 10:02:07 FLIGetFilterPos err=0 currentPosition=0 10:02:07 FLIGetStepsRemaining err=0 RemainingSteps=0 10:02:07 Filter is already there-color wheel unchanged 10:02:07 Received message from Master: op=Shutter serial=61190 10:02:07 Shutter LASER open 10:02:07 Received message from Camera: op=State serial=61192 10:02:07 GetSingleValue result=40 Value=cccccccc 10:02:07 SkyScan query 10:02:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:02:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:08 Parameters OK 10:02:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:08 Set A/D data flow result=40 10:02:08 Set A/D channel type result=40 10:02:08 Set A/D encoding result=40 10:02:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:08 Set channel filter=0.000000e+000 result=40 10:02:08 Config A/D Result=40 10:02:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:08 Get A/D filter: -9.255963e+061 result=40 10:02:08 Get A/D value=-858993460 result=40 10:02:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:08 Parameters OK 10:02:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:08 Set A/D data flow result=40 10:02:08 Set A/D channel type result=40 10:02:08 Set A/D encoding result=40 10:02:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:08 Set channel filter=0.000000e+000 result=40 10:02:08 Config A/D Result=40 10:02:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:08 Get A/D filter: -9.255963e+061 result=40 10:02:08 Get A/D value=-858993460 result=40 10:02:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:02:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:02:08 Aux= 10:02:08 Message to Camera, serial 61192 queued 10:02:16 Received message from Master: op=Shutter serial=61202 10:02:16 Shutter LASER close 10:02:17 Received message from Master: op=PointingHead serial=61206 10:02:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:02:17 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:02:17 Point started: ret=0 10:02:17 point_skyscan result=0 10:02:18 Check angles 10:02:18 SkyScan query 10:02:19 SkyScan query done: ret=0 az=89.67<-5978 ze=156.945<-1537 Statuses=0009 0009 10:02:19 Msec=0 True Az=89.67 Ze=156.945 Az status=0009 Ze status=0009 10:02:19 Check angles 10:02:19 SkyScan query 10:02:19 SkyScan query done: ret=0 az=72.03<-4802 ze=135.99<-2934 Statuses=0009 0009 10:02:19 Msec=750 True Az=72.03 Ze=135.99 Az status=0009 Ze status=0009 10:02:19 Check angles 10:02:19 SkyScan query 10:02:20 SkyScan query done: ret=0 az=54.84<-3656 ze=115.02<-4332 Statuses=0009 0009 10:02:20 Msec=1500 True Az=54.84 Ze=115.02 Az status=0009 Ze status=0009 10:02:20 Check angles 10:02:20 SkyScan query 10:02:21 SkyScan query done: ret=0 az=40.875<-2725 ze=94.05<-5730 Statuses=0009 0009 10:02:21 Msec=2250 True Az=40.875 Ze=94.05 Az status=0009 Ze status=0009 10:02:21 Check angles 10:02:21 SkyScan query 10:02:22 SkyScan query done: ret=0 az=40.995<-2733 ze=73.08<-7128 Statuses=0008 0009 10:02:22 Msec=3000 True Az=40.995 Ze=73.08 Az status=0008 Ze status=0009 10:02:22 Check angles 10:02:22 SkyScan query 10:02:22 SkyScan query done: ret=0 az=40.995<-2733 ze=52.65<-8490 Statuses=0008 0009 10:02:22 Msec=3750 True Az=40.995 Ze=52.65 Az status=0008 Ze status=0009 10:02:22 Check angles 10:02:22 SkyScan query 10:02:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:02:23 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:02:23 Message to Master queued w/err=0: serial=61206 error=0 10:02:28 Received message from Master: op=Filter serial=61207 10:02:28 Color wheel filter change from 0 to 0 10:02:28 FLIGetFilterPos err=0 currentPosition=0 10:02:28 FLIGetStepsRemaining err=0 RemainingSteps=0 10:02:28 Filter is already there-color wheel unchanged 10:02:28 Received message from Master: op=Shutter serial=61208 10:02:28 Shutter LASER close 10:02:28 Received message from Camera: op=State serial=61210 10:02:28 GetSingleValue result=40 Value=cccccccc 10:02:28 SkyScan query 10:02:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:02:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:29 Parameters OK 10:02:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:29 Set A/D data flow result=40 10:02:29 Set A/D channel type result=40 10:02:29 Set A/D encoding result=40 10:02:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:29 Set channel filter=0.000000e+000 result=40 10:02:29 Config A/D Result=40 10:02:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:29 Get A/D filter: -9.255963e+061 result=40 10:02:29 Get A/D value=-858993460 result=40 10:02:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:29 Parameters OK 10:02:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:29 Set A/D data flow result=40 10:02:29 Set A/D channel type result=40 10:02:29 Set A/D encoding result=40 10:02:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:29 Set channel filter=0.000000e+000 result=40 10:02:29 Config A/D Result=40 10:02:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:29 Get A/D filter: -9.255963e+061 result=40 10:02:29 Get A/D value=-858993460 result=40 10:02:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:02:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:02:29 Aux= 10:02:29 Message to Camera, serial 61210 queued 10:03:06 Received message from Master: op=PointingHead serial=61223 10:03:06 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:03:06 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:03:06 Point started: ret=0 10:03:06 point_skyscan result=0 10:03:07 Check angles 10:03:07 SkyScan query 10:03:07 SkyScan query done: ret=0 az=63.765<-4251 ze=66.555<-7563 Statuses=0009 0008 10:03:07 Msec=0 True Az=63.765 Ze=66.555 Az status=0009 Ze status=0008 10:03:08 Check angles 10:03:08 SkyScan query 10:03:08 SkyScan query done: ret=0 az=81.51<-5434 ze=66.51<-7566 Statuses=0009 0008 10:03:08 Msec=750 True Az=81.51 Ze=66.51 Az status=0009 Ze status=0008 10:03:08 Check angles 10:03:08 SkyScan query 10:03:09 SkyScan query done: ret=0 az=99.48<-6632 ze=66.495<-7567 Statuses=0009 0008 10:03:09 Msec=1500 True Az=99.48 Ze=66.495 Az status=0009 Ze status=0008 10:03:09 Check angles 10:03:09 SkyScan query 10:03:10 SkyScan query done: ret=0 az=117.03<-7802 ze=66.495<-7567 Statuses=0009 0008 10:03:10 Msec=2250 True Az=117.03 Ze=66.495 Az status=0009 Ze status=0008 10:03:10 Check angles 10:03:10 SkyScan query 10:03:11 SkyScan query done: ret=0 az=134.46<-8964 ze=66.495<-7567 Statuses=0009 0008 10:03:11 Msec=3000 True Az=134.46 Ze=66.495 Az status=0009 Ze status=0008 10:03:11 Check angles 10:03:11 SkyScan query 10:03:11 SkyScan query done: ret=0 az=151.89<-10126 ze=66.495<-7567 Statuses=0009 0008 10:03:11 Msec=3750 True Az=151.89 Ze=66.495 Az status=0009 Ze status=0008 10:03:11 Check angles 10:03:11 SkyScan query 10:03:12 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:03:12 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 10:03:12 Message to Master queued w/err=0: serial=61223 error=0 10:03:17 Received message from Master: op=Filter serial=61224 10:03:17 Color wheel filter change from 0 to 0 10:03:17 FLIGetFilterPos err=0 currentPosition=0 10:03:17 FLIGetStepsRemaining err=0 RemainingSteps=0 10:03:17 Filter is already there-color wheel unchanged 10:03:17 Received message from Master: op=Shutter serial=61225 10:03:17 Shutter LASER close 10:03:17 Received message from Camera: op=State serial=61227 10:03:17 GetSingleValue result=40 Value=cccccccc 10:03:17 SkyScan query 10:03:18 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:03:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:18 Parameters OK 10:03:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:18 Set A/D data flow result=40 10:03:18 Set A/D channel type result=40 10:03:18 Set A/D encoding result=40 10:03:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:18 Set channel filter=0.000000e+000 result=40 10:03:18 Config A/D Result=40 10:03:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:18 Get A/D filter: -9.255963e+061 result=40 10:03:18 Get A/D value=-858993460 result=40 10:03:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:18 Parameters OK 10:03:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:18 Set A/D data flow result=40 10:03:18 Set A/D channel type result=40 10:03:18 Set A/D encoding result=40 10:03:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:18 Set channel filter=0.000000e+000 result=40 10:03:18 Config A/D Result=40 10:03:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:18 Get A/D filter: -9.255963e+061 result=40 10:03:18 Get A/D value=-858993460 result=40 10:03:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:18 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:03:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:03:18 Aux= 10:03:18 Message to Camera, serial 61227 queued 10:03:55 Received message from Master: op=PointingHead serial=61240 10:03:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:03:55 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:03:55 Point started: ret=0 10:03:55 point_skyscan result=0 10:03:56 Check angles 10:03:56 SkyScan query 10:03:56 SkyScan query done: ret=0 az=135.135<-9009 ze=36.885<-9541 Statuses=0009 0009 10:03:56 Msec=0 True Az=135.135 Ze=36.885 Az status=0009 Ze status=0009 10:03:56 Check angles 10:03:56 SkyScan query 10:03:57 SkyScan query done: ret=0 az=117.645<-7843 ze=15.93<-10938 Statuses=0009 0009 10:03:57 Msec=750 True Az=117.645 Ze=15.93 Az status=0009 Ze status=0009 10:03:57 Check angles 10:03:57 SkyScan query 10:03:58 SkyScan query done: ret=0 az=100.335<-6689 ze=-5.04<-12336 Statuses=0009 0009 10:03:58 Msec=1500 True Az=100.335 Ze=-5.04 Az status=0009 Ze status=0009 10:03:58 Check angles 10:03:58 SkyScan query 10:03:59 SkyScan query done: ret=0 az=82.785<-5519 ze=-25.995<-13733 Statuses=0009 0009 10:03:59 Msec=2250 True Az=82.785 Ze=-25.995 Az status=0009 Ze status=0009 10:03:59 Check angles 10:03:59 SkyScan query 10:03:59 SkyScan query done: ret=0 az=65.295<-4353 ze=-38.565<-14571 Statuses=0009 0008 10:03:59 Msec=3000 True Az=65.295 Ze=-38.565 Az status=0009 Ze status=0008 10:03:59 Check angles 10:03:59 SkyScan query 10:04:00 SkyScan query done: ret=0 az=47.79<-3186 ze=-38.535<-14569 Statuses=0009 0008 10:04:00 Msec=3750 True Az=47.79 Ze=-38.535 Az status=0009 Ze status=0008 10:04:00 Check angles 10:04:00 SkyScan query 10:04:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:04:01 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:04:01 Message to Master queued w/err=0: serial=61240 error=0 10:04:06 Received message from Master: op=Filter serial=61241 10:04:06 Color wheel filter change from 0 to 0 10:04:06 FLIGetFilterPos err=0 currentPosition=0 10:04:06 FLIGetStepsRemaining err=0 RemainingSteps=0 10:04:06 Filter is already there-color wheel unchanged 10:04:06 Received message from Master: op=Shutter serial=61242 10:04:06 Shutter LASER close 10:04:06 Received message from Camera: op=State serial=61244 10:04:06 GetSingleValue result=40 Value=cccccccc 10:04:06 SkyScan query 10:04:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:04:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:07 Parameters OK 10:04:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:07 Set A/D data flow result=40 10:04:07 Set A/D channel type result=40 10:04:07 Set A/D encoding result=40 10:04:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:07 Set channel filter=0.000000e+000 result=40 10:04:07 Config A/D Result=40 10:04:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:07 Get A/D filter: -9.255963e+061 result=40 10:04:07 Get A/D value=-858993460 result=40 10:04:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:07 Parameters OK 10:04:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:07 Set A/D data flow result=40 10:04:07 Set A/D channel type result=40 10:04:07 Set A/D encoding result=40 10:04:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:07 Set channel filter=0.000000e+000 result=40 10:04:07 Config A/D Result=40 10:04:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:07 Get A/D filter: -9.255963e+061 result=40 10:04:07 Get A/D value=-858993460 result=40 10:04:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:04:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:04:07 Aux= 10:04:07 Message to Camera, serial 61244 queued 10:04:43 Received message from Master: op=PointingHead serial=61257 10:04:43 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:04:43 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:04:44 Point started: ret=0 10:04:44 point_skyscan result=0 10:04:45 Check angles 10:04:45 SkyScan query 10:04:45 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.235<-16549 Statuses=0009 0009 10:04:45 Msec=0 True Az=63.99 Ze=-68.235 Az status=0009 Ze status=0009 10:04:45 Check angles 10:04:45 SkyScan query 10:04:46 SkyScan query done: ret=0 az=81.27<-5418 ze=-89.235<-17949 Statuses=0009 0009 10:04:46 Msec=750 True Az=81.27 Ze=-89.235 Az status=0009 Ze status=0009 10:04:46 Check angles 10:04:46 SkyScan query 10:04:47 SkyScan query done: ret=0 az=99.405<-6627 ze=-110.655<-19377 Statuses=0009 0009 10:04:47 Msec=1500 True Az=99.405 Ze=-110.655 Az status=0009 Ze status=0009 10:04:47 Check angles 10:04:47 SkyScan query 10:04:47 SkyScan query done: ret=0 az=117.18<-7812 ze=-132<-20800 Statuses=0009 0009 10:04:47 Msec=2250 True Az=117.18 Ze=-132 Az status=0009 Ze status=0009 10:04:48 Check angles 10:04:48 SkyScan query 10:04:48 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.555<-21437 Statuses=0009 0008 10:04:48 Msec=3000 True Az=131.115 Ze=-141.555 Az status=0009 Ze status=0008 10:04:48 Check angles 10:04:48 SkyScan query 10:04:49 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 10:04:49 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 10:04:49 Message to Master queued w/err=0: serial=61257 error=0 10:04:54 Received message from Master: op=Filter serial=61258 10:04:54 Color wheel filter change from 0 to 0 10:04:54 FLIGetFilterPos err=0 currentPosition=0 10:04:54 FLIGetStepsRemaining err=0 RemainingSteps=0 10:04:54 Filter is already there-color wheel unchanged 10:04:54 Received message from Master: op=Shutter serial=61259 10:04:54 Shutter LASER close 10:04:54 Received message from Camera: op=State serial=61261 10:04:54 GetSingleValue result=40 Value=cccccccc 10:04:54 SkyScan query 10:04:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:04:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:55 Parameters OK 10:04:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:55 Set A/D data flow result=40 10:04:55 Set A/D channel type result=40 10:04:55 Set A/D encoding result=40 10:04:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:55 Set channel filter=0.000000e+000 result=40 10:04:55 Config A/D Result=40 10:04:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:55 Get A/D filter: -9.255963e+061 result=40 10:04:55 Get A/D value=-858993460 result=40 10:04:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:55 Parameters OK 10:04:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:55 Set A/D data flow result=40 10:04:55 Set A/D channel type result=40 10:04:55 Set A/D encoding result=40 10:04:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:55 Set channel filter=0.000000e+000 result=40 10:04:55 Config A/D Result=40 10:04:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:55 Get A/D filter: -9.255963e+061 result=40 10:04:55 Get A/D value=-858993460 result=40 10:04:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:55 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:04:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:04:55 Aux= 10:04:55 Message to Camera, serial 61261 queued 10:05:31 Received message from Master: op=PointingHead serial=61273 10:05:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:05:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:05:31 Point started: ret=0 10:05:31 point_skyscan result=0 10:05:32 Check angles 10:05:32 SkyScan query 10:05:32 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.45<-23430 Statuses=0009 0009 10:05:32 Msec=0 True Az=113.01 Ze=-171.45 Az status=0009 Ze status=0009 10:05:32 Check angles 10:05:32 SkyScan query 10:05:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:05:33 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:05:33 Message to Master queued w/err=0: serial=61273 error=0 10:05:38 Received message from Master: op=Filter serial=61274 10:05:38 Color wheel filter change from 0 to 0 10:05:38 FLIGetFilterPos err=0 currentPosition=0 10:05:38 FLIGetStepsRemaining err=0 RemainingSteps=0 10:05:38 Filter is already there-color wheel unchanged 10:05:38 Received message from Master: op=Shutter serial=61275 10:05:38 Shutter LASER open 10:05:38 Received message from Camera: op=State serial=61277 10:05:38 GetSingleValue result=40 Value=cccccccc 10:05:38 SkyScan query 10:05:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:05:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:39 Parameters OK 10:05:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:39 Set A/D data flow result=40 10:05:39 Set A/D channel type result=40 10:05:39 Set A/D encoding result=40 10:05:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:39 Set channel filter=0.000000e+000 result=40 10:05:39 Config A/D Result=40 10:05:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:39 Get A/D filter: -9.255963e+061 result=40 10:05:39 Get A/D value=-858993460 result=40 10:05:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:39 Parameters OK 10:05:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:39 Set A/D data flow result=40 10:05:39 Set A/D channel type result=40 10:05:39 Set A/D encoding result=40 10:05:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:39 Set channel filter=0.000000e+000 result=40 10:05:39 Config A/D Result=40 10:05:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:39 Get A/D filter: -9.255963e+061 result=40 10:05:39 Get A/D value=-858993460 result=40 10:05:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:05:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:05:39 Aux= 10:05:39 Message to Camera, serial 61277 queued 10:05:47 Received message from Master: op=Shutter serial=61287 10:05:47 Shutter LASER close 10:05:48 Received message from Master: op=PointingHead serial=61291 10:05:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:05:48 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:05:48 Point started: ret=0 10:05:48 point_skyscan result=0 10:05:49 Check angles 10:05:49 SkyScan query 10:05:50 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.55<-21570 Statuses=0009 0009 10:05:50 Msec=0 True Az=135.72 Ze=-143.55 Az status=0009 Ze status=0009 10:05:50 Check angles 10:05:50 SkyScan query [UTC 2018-12-11 10:05:50] 10:05:50 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.115<-20141 Statuses=0009 0009 10:05:51 Msec=750 True Az=153.57 Ze=-122.115 Az status=0009 Ze status=0009 10:05:51 Check angles 10:05:51 SkyScan query 10:05:51 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.71<-18714 Statuses=0009 0009 10:05:51 Msec=1500 True Az=171.405 Ze=-100.71 Az status=0009 Ze status=0009 10:05:51 Check angles 10:05:51 SkyScan query 10:05:52 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.785<-17319 Statuses=0008 0009 10:05:52 Msec=2250 True Az=176.025 Ze=-79.785 Az status=0008 Ze status=0009 10:05:52 Check angles 10:05:52 SkyScan query 10:05:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.815<-15921 Statuses=0008 0009 10:05:53 Msec=3000 True Az=175.995 Ze=-58.815 Az status=0008 Ze status=0009 10:05:53 Check angles 10:05:53 SkyScan query 10:05:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:05:53 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:05:53 Message to Master queued w/err=0: serial=61291 error=0 10:05:58 Received message from Master: op=Filter serial=61292 10:05:58 Color wheel filter change from 0 to 0 10:05:58 FLIGetFilterPos err=0 currentPosition=0 10:05:58 FLIGetStepsRemaining err=0 RemainingSteps=0 10:05:58 Filter is already there-color wheel unchanged 10:05:59 Received message from Master: op=Shutter serial=61293 10:05:59 Shutter LASER close 10:05:59 Received message from Camera: op=State serial=61295 10:05:59 GetSingleValue result=40 Value=cccccccc 10:05:59 SkyScan query 10:05:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:05:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:59 Parameters OK 10:05:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:59 Set A/D data flow result=40 10:05:59 Set A/D channel type result=40 10:05:59 Set A/D encoding result=40 10:05:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:59 Set channel filter=0.000000e+000 result=40 10:05:59 Config A/D Result=40 10:05:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:59 Get A/D filter: -9.255963e+061 result=40 10:05:59 Get A/D value=-858993460 result=40 10:05:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:59 Parameters OK 10:05:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:59 Set A/D data flow result=40 10:05:59 Set A/D channel type result=40 10:05:59 Set A/D encoding result=40 10:05:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:59 Set channel filter=0.000000e+000 result=40 10:05:59 Config A/D Result=40 10:05:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:59 Get A/D filter: -9.255963e+061 result=40 10:05:59 Get A/D value=-858993460 result=40 10:05:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:05:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:05:59 Aux= 10:05:59 Message to Camera, serial 61295 queued 10:06:36 Received message from Master: op=PointingHead serial=61308 10:06:36 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:06:36 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:06:37 Point started: ret=0 10:06:37 point_skyscan result=0 10:06:37 Check angles 10:06:37 SkyScan query 10:06:38 SkyScan query done: ret=0 az=152.745<-10183 ze=-21.33<-13422 Statuses=0009 0009 10:06:38 Msec=0 True Az=152.745 Ze=-21.33 Az status=0009 Ze status=0009 10:06:38 Check angles 10:06:38 SkyScan query 10:06:39 SkyScan query done: ret=0 az=134.73<-8982 ze=0.045<-11997 Statuses=0009 0009 10:06:39 Msec=750 True Az=134.73 Ze=0.045 Az status=0009 Ze status=0009 10:06:39 Check angles 10:06:39 SkyScan query 10:06:39 SkyScan query done: ret=0 az=117.255<-7817 ze=21.03<-10598 Statuses=0009 0009 10:06:39 Msec=1500 True Az=117.255 Ze=21.03 Az status=0009 Ze status=0009 10:06:40 Check angles 10:06:40 SkyScan query 10:06:40 SkyScan query done: ret=0 az=99.945<-6663 ze=41.97<-9202 Statuses=0009 0009 10:06:40 Msec=2250 True Az=99.945 Ze=41.97 Az status=0009 Ze status=0009 10:06:40 Check angles 10:06:40 SkyScan query 10:06:41 SkyScan query done: ret=0 az=86.04<-5736 ze=51.555<-8563 Statuses=0009 0008 10:06:41 Msec=3000 True Az=86.04 Ze=51.555 Az status=0009 Ze status=0008 10:06:41 Check angles 10:06:41 SkyScan query 10:06:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:06:42 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:06:42 Message to Master queued w/err=0: serial=61308 error=0 10:06:47 Received message from Master: op=Filter serial=61309 10:06:47 Color wheel filter change from 0 to 0 10:06:47 FLIGetFilterPos err=0 currentPosition=0 10:06:47 FLIGetStepsRemaining err=0 RemainingSteps=0 10:06:47 Filter is already there-color wheel unchanged 10:06:47 Received message from Master: op=Shutter serial=61310 10:06:47 Shutter LASER close 10:06:47 Received message from Camera: op=State serial=61312 10:06:47 GetSingleValue result=40 Value=cccccccc 10:06:47 SkyScan query 10:06:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:06:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:47 Parameters OK 10:06:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:47 Set A/D data flow result=40 10:06:47 Set A/D channel type result=40 10:06:47 Set A/D encoding result=40 10:06:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:47 Set channel filter=0.000000e+000 result=40 10:06:47 Config A/D Result=40 10:06:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:47 Get A/D filter: -9.255963e+061 result=40 10:06:47 Get A/D value=-858993460 result=40 10:06:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:47 Parameters OK 10:06:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:47 Set A/D data flow result=40 10:06:47 Set A/D channel type result=40 10:06:47 Set A/D encoding result=40 10:06:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:47 Set channel filter=0.000000e+000 result=40 10:06:47 Config A/D Result=40 10:06:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:47 Get A/D filter: -9.255963e+061 result=40 10:06:47 Get A/D value=-858993460 result=40 10:06:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:06:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:06:47 Aux= 10:06:47 Message to Camera, serial 61312 queued 10:07:24 Received message from Master: op=PointingHead serial=61325 10:07:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:07:24 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:07:25 Point started: ret=0 10:07:25 point_skyscan result=0 10:07:25 Check angles 10:07:25 SkyScan query 10:07:26 SkyScan query done: ret=0 az=108.765<-7251 ze=38.49<-9434 Statuses=0009 0008 10:07:26 Msec=0 True Az=108.765 Ze=38.49 Az status=0009 Ze status=0008 10:07:26 Check angles 10:07:26 SkyScan query 10:07:27 SkyScan query done: ret=0 az=126.3<-8420 ze=38.505<-9433 Statuses=0009 0008 10:07:27 Msec=750 True Az=126.3 Ze=38.505 Az status=0009 Ze status=0008 10:07:27 Check angles 10:07:27 SkyScan query 10:07:27 SkyScan query done: ret=0 az=143.685<-9579 ze=38.505<-9433 Statuses=0009 0008 10:07:27 Msec=1500 True Az=143.685 Ze=38.505 Az status=0009 Ze status=0008 10:07:28 Check angles 10:07:28 SkyScan query 10:07:28 SkyScan query done: ret=0 az=161.07<-10738 ze=38.505<-9433 Statuses=0009 0008 10:07:28 Msec=2250 True Az=161.07 Ze=38.505 Az status=0009 Ze status=0008 10:07:28 Check angles 10:07:28 SkyScan query 10:07:29 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 10:07:29 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 10:07:29 Check angles 10:07:29 SkyScan query 10:07:30 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:07:30 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:07:30 Message to Master queued w/err=0: serial=61325 error=0 10:07:35 Received message from Master: op=Filter serial=61326 10:07:35 Color wheel filter change from 0 to 0 10:07:35 FLIGetFilterPos err=0 currentPosition=0 10:07:35 FLIGetStepsRemaining err=0 RemainingSteps=0 10:07:35 Filter is already there-color wheel unchanged 10:07:35 Received message from Master: op=Shutter serial=61327 10:07:35 Shutter LASER close 10:07:35 Received message from Camera: op=State serial=61329 10:07:35 GetSingleValue result=40 Value=cccccccc 10:07:35 SkyScan query 10:07:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:07:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:36 Parameters OK 10:07:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:36 Set A/D data flow result=40 10:07:36 Set A/D channel type result=40 10:07:36 Set A/D encoding result=40 10:07:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:36 Set channel filter=0.000000e+000 result=40 10:07:36 Config A/D Result=40 10:07:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:36 Get A/D filter: -9.255963e+061 result=40 10:07:36 Get A/D value=-858993460 result=40 10:07:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:36 Parameters OK 10:07:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:36 Set A/D data flow result=40 10:07:36 Set A/D channel type result=40 10:07:36 Set A/D encoding result=40 10:07:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:36 Set channel filter=0.000000e+000 result=40 10:07:36 Config A/D Result=40 10:07:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:36 Get A/D filter: -9.255963e+061 result=40 10:07:36 Get A/D value=-858993460 result=40 10:07:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:07:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:07:36 Aux= 10:07:36 Message to Camera, serial 61329 queued 10:08:12 Received message from Master: op=PointingHead serial=61342 10:08:12 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:08:12 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:08:13 Point started: ret=0 10:08:13 point_skyscan result=0 10:08:13 Check angles 10:08:13 SkyScan query 10:08:14 SkyScan query done: ret=0 az=153.225<-10215 ze=8.985<-11401 Statuses=0009 0009 10:08:14 Msec=0 True Az=153.225 Ze=8.985 Az status=0009 Ze status=0009 10:08:14 Check angles 10:08:14 SkyScan query 10:08:15 SkyScan query done: ret=0 az=135.855<-9057 ze=-12<-12800 Statuses=0009 0009 10:08:15 Msec=750 True Az=135.855 Ze=-12 Az status=0009 Ze status=0009 10:08:15 Check angles 10:08:15 SkyScan query 10:08:16 SkyScan query done: ret=0 az=117.75<-7850 ze=-33.33<-14222 Statuses=0009 0009 10:08:16 Msec=1500 True Az=117.75 Ze=-33.33 Az status=0009 Ze status=0009 10:08:16 Check angles 10:08:16 SkyScan query 10:08:16 SkyScan query done: ret=0 az=100.275<-6685 ze=-51.54<-15436 Statuses=0009 0009 10:08:16 Msec=2250 True Az=100.275 Ze=-51.54 Az status=0009 Ze status=0009 10:08:16 Check angles 10:08:16 SkyScan query 10:08:17 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 10:08:17 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 10:08:17 Check angles 10:08:17 SkyScan query 10:08:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:08:18 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:08:18 Message to Master queued w/err=0: serial=61342 error=0 10:08:23 Received message from Master: op=Filter serial=61343 10:08:23 Color wheel filter change from 0 to 0 10:08:23 FLIGetFilterPos err=0 currentPosition=0 10:08:23 FLIGetStepsRemaining err=0 RemainingSteps=0 10:08:23 Filter is already there-color wheel unchanged 10:08:23 Received message from Master: op=Shutter serial=61344 10:08:23 Shutter LASER close 10:08:23 Received message from Camera: op=State serial=61346 10:08:23 GetSingleValue result=40 Value=cccccccc 10:08:23 SkyScan query 10:08:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:08:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:24 Parameters OK 10:08:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:24 Set A/D data flow result=40 10:08:24 Set A/D channel type result=40 10:08:24 Set A/D encoding result=40 10:08:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:24 Set channel filter=0.000000e+000 result=40 10:08:24 Config A/D Result=40 10:08:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:24 Get A/D filter: -9.255963e+061 result=40 10:08:24 Get A/D value=-858993460 result=40 10:08:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:24 Parameters OK 10:08:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:24 Set A/D data flow result=40 10:08:24 Set A/D channel type result=40 10:08:24 Set A/D encoding result=40 10:08:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:24 Set channel filter=0.000000e+000 result=40 10:08:24 Config A/D Result=40 10:08:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:24 Get A/D filter: -9.255963e+061 result=40 10:08:24 Get A/D value=-858993460 result=40 10:08:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:08:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:08:24 Aux= 10:08:24 Message to Camera, serial 61346 queued 10:09:00 Received message from Master: op=PointingHead serial=61359 10:09:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:09:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:09:01 Point started: ret=0 10:09:01 point_skyscan result=0 10:09:02 Check angles 10:09:02 SkyScan query 10:09:02 SkyScan query done: ret=0 az=109.35<-7290 ze=-81.69<-17446 Statuses=0009 0009 10:09:02 Msec=0 True Az=109.35 Ze=-81.69 Az status=0009 Ze status=0009 10:09:02 Check angles 10:09:02 SkyScan query 10:09:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.615<-18841 Statuses=0008 0009 10:09:03 Msec=750 True Az=112.995 Ze=-102.615 Az status=0008 Ze status=0009 10:09:03 Check angles 10:09:03 SkyScan query 10:09:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.005<-20267 Statuses=0008 0009 10:09:04 Msec=1500 True Az=112.995 Ze=-124.005 Az status=0008 Ze status=0009 10:09:04 Check angles 10:09:04 SkyScan query 10:09:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.93<-21662 Statuses=0008 0009 10:09:04 Msec=2250 True Az=112.995 Ze=-144.93 Az status=0008 Ze status=0009 10:09:05 Check angles 10:09:05 SkyScan query 10:09:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.885<-23059 Statuses=0008 0009 10:09:05 Msec=3000 True Az=112.995 Ze=-165.885 Az status=0008 Ze status=0009 10:09:05 Check angles 10:09:05 SkyScan query 10:09:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:09:06 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:09:06 Message to Master queued w/err=0: serial=61359 error=0 10:09:11 Received message from Master: op=Filter serial=61360 10:09:11 Color wheel filter change from 0 to 0 10:09:11 FLIGetFilterPos err=0 currentPosition=0 10:09:11 FLIGetStepsRemaining err=0 RemainingSteps=0 10:09:11 Filter is already there-color wheel unchanged 10:09:11 Received message from Master: op=Shutter serial=61361 10:09:11 Shutter LASER open 10:09:11 Received message from Camera: op=State serial=61363 10:09:11 GetSingleValue result=40 Value=cccccccc 10:09:11 SkyScan query 10:09:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:09:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:12 Parameters OK 10:09:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:12 Set A/D data flow result=40 10:09:12 Set A/D channel type result=40 10:09:12 Set A/D encoding result=40 10:09:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:12 Set channel filter=0.000000e+000 result=40 10:09:12 Config A/D Result=40 10:09:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:12 Get A/D filter: -9.255963e+061 result=40 10:09:12 Get A/D value=-858993460 result=40 10:09:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:12 Parameters OK 10:09:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:12 Set A/D data flow result=40 10:09:12 Set A/D channel type result=40 10:09:12 Set A/D encoding result=40 10:09:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:12 Set channel filter=0.000000e+000 result=40 10:09:12 Config A/D Result=40 10:09:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:12 Get A/D filter: -9.255963e+061 result=40 10:09:12 Get A/D value=-858993460 result=40 10:09:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:09:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:09:12 Aux= 10:09:12 Message to Camera, serial 61363 queued 10:09:19 Received message from Master: op=Shutter serial=61372 10:09:19 Shutter LASER close 10:09:20 Received message from Master: op=PointingHead serial=61376 10:09:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:09:20 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:09:20 Point started: ret=0 10:09:20 point_skyscan result=0 10:09:21 Check angles 10:09:21 SkyScan query 10:09:22 SkyScan query done: ret=0 az=89.67<-5978 ze=157.005<-1533 Statuses=0009 0009 10:09:22 Msec=0 True Az=89.67 Ze=157.005 Az status=0009 Ze status=0009 10:09:22 Check angles 10:09:22 SkyScan query 10:09:22 SkyScan query done: ret=0 az=72.195<-4813 ze=136.065<-2929 Statuses=0009 0009 10:09:22 Msec=750 True Az=72.195 Ze=136.065 Az status=0009 Ze status=0009 10:09:22 Check angles 10:09:22 SkyScan query 10:09:23 SkyScan query done: ret=0 az=54.84<-3656 ze=115.125<-4325 Statuses=0009 0009 10:09:23 Msec=1500 True Az=54.84 Ze=115.125 Az status=0009 Ze status=0009 10:09:23 Check angles 10:09:23 SkyScan query 10:09:24 SkyScan query done: ret=0 az=40.875<-2725 ze=94.14<-5724 Statuses=0009 0009 10:09:24 Msec=2250 True Az=40.875 Ze=94.14 Az status=0009 Ze status=0009 10:09:24 Check angles 10:09:24 SkyScan query 10:09:25 SkyScan query done: ret=0 az=40.995<-2733 ze=73.17<-7122 Statuses=0008 0009 10:09:25 Msec=3000 True Az=40.995 Ze=73.17 Az status=0008 Ze status=0009 10:09:25 Check angles 10:09:25 SkyScan query 10:09:25 SkyScan query done: ret=0 az=40.995<-2733 ze=52.695<-8487 Statuses=0008 0009 10:09:25 Msec=3750 True Az=40.995 Ze=52.695 Az status=0008 Ze status=0009 10:09:25 Check angles 10:09:25 SkyScan query 10:09:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:09:26 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:09:26 Message to Master queued w/err=0: serial=61376 error=0 10:09:31 Received message from Master: op=Filter serial=61377 10:09:31 Color wheel filter change from 0 to 0 10:09:31 FLIGetFilterPos err=0 currentPosition=0 10:09:31 FLIGetStepsRemaining err=0 RemainingSteps=0 10:09:31 Filter is already there-color wheel unchanged 10:09:31 Received message from Master: op=Shutter serial=61378 10:09:31 Shutter LASER close 10:09:31 Received message from Camera: op=State serial=61380 10:09:31 GetSingleValue result=40 Value=cccccccc 10:09:31 SkyScan query 10:09:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:09:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:32 Parameters OK 10:09:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:32 Set A/D data flow result=40 10:09:32 Set A/D channel type result=40 10:09:32 Set A/D encoding result=40 10:09:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:32 Set channel filter=0.000000e+000 result=40 10:09:32 Config A/D Result=40 10:09:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:32 Get A/D filter: -9.255963e+061 result=40 10:09:32 Get A/D value=-858993460 result=40 10:09:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:32 Parameters OK 10:09:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:32 Set A/D data flow result=40 10:09:32 Set A/D channel type result=40 10:09:32 Set A/D encoding result=40 10:09:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:32 Set channel filter=0.000000e+000 result=40 10:09:32 Config A/D Result=40 10:09:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:32 Get A/D filter: -9.255963e+061 result=40 10:09:32 Get A/D value=-858993460 result=40 10:09:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:09:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:09:32 Aux= 10:09:32 Message to Camera, serial 61380 queued 10:10:09 Received message from Master: op=PointingHead serial=61393 10:10:09 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:10:09 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:10:09 Point started: ret=0 10:10:09 point_skyscan result=0 10:10:10 Check angles 10:10:10 SkyScan query 10:10:10 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 10:10:10 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 10:10:11 Check angles 10:10:11 SkyScan query 10:10:11 SkyScan query done: ret=0 az=82.005<-5467 ze=66.51<-7566 Statuses=0009 0008 10:10:11 Msec=750 True Az=82.005 Ze=66.51 Az status=0009 Ze status=0008 10:10:11 Check angles 10:10:11 SkyScan query 10:10:12 SkyScan query done: ret=0 az=99.6<-6640 ze=66.495<-7567 Statuses=0009 0008 10:10:12 Msec=1500 True Az=99.6 Ze=66.495 Az status=0009 Ze status=0008 10:10:12 Check angles 10:10:12 SkyScan query 10:10:13 SkyScan query done: ret=0 az=117.015<-7801 ze=66.495<-7567 Statuses=0009 0008 10:10:13 Msec=2250 True Az=117.015 Ze=66.495 Az status=0009 Ze status=0008 10:10:13 Check angles 10:10:13 SkyScan query 10:10:13 SkyScan query done: ret=0 az=134.805<-8987 ze=66.495<-7567 Statuses=0009 0008 10:10:13 Msec=3000 True Az=134.805 Ze=66.495 Az status=0009 Ze status=0008 10:10:14 Check angles 10:10:14 SkyScan query 10:10:14 SkyScan query done: ret=0 az=152.67<-10178 ze=66.495<-7567 Statuses=0009 0008 10:10:14 Msec=3750 True Az=152.67 Ze=66.495 Az status=0009 Ze status=0008 10:10:14 Check angles 10:10:14 SkyScan query 10:10:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:10:15 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 10:10:15 Message to Master queued w/err=0: serial=61393 error=0 10:10:20 Received message from Master: op=Filter serial=61394 10:10:20 Color wheel filter change from 0 to 0 10:10:20 FLIGetFilterPos err=0 currentPosition=0 10:10:20 FLIGetStepsRemaining err=0 RemainingSteps=0 10:10:20 Filter is already there-color wheel unchanged 10:10:20 Received message from Master: op=Shutter serial=61395 10:10:20 Shutter LASER close 10:10:20 Received message from Camera: op=State serial=61397 10:10:20 GetSingleValue result=40 Value=cccccccc 10:10:20 SkyScan query 10:10:21 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:10:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:21 Parameters OK 10:10:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:21 Set A/D data flow result=40 10:10:21 Set A/D channel type result=40 10:10:21 Set A/D encoding result=40 10:10:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:21 Set channel filter=0.000000e+000 result=40 10:10:21 Config A/D Result=40 10:10:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:21 Get A/D filter: -9.255963e+061 result=40 10:10:21 Get A/D value=-858993460 result=40 10:10:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:21 Parameters OK 10:10:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:21 Set A/D data flow result=40 10:10:21 Set A/D channel type result=40 10:10:21 Set A/D encoding result=40 10:10:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:21 Set channel filter=0.000000e+000 result=40 10:10:21 Config A/D Result=40 10:10:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:21 Get A/D filter: -9.255963e+061 result=40 10:10:21 Get A/D value=-858993460 result=40 10:10:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:21 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:10:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:10:21 Aux= 10:10:21 Message to Camera, serial 61397 queued 10:10:58 Received message from Master: op=PointingHead serial=61410 10:10:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:10:58 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:10:58 Point started: ret=0 10:10:58 point_skyscan result=0 10:10:59 Check angles 10:10:59 SkyScan query 10:10:59 SkyScan query done: ret=0 az=134.385<-8959 ze=36.39<-9574 Statuses=0009 0009 10:10:59 Msec=0 True Az=134.385 Ze=36.39 Az status=0009 Ze status=0009 10:11:00 Check angles 10:11:00 SkyScan query 10:11:00 SkyScan query done: ret=0 az=116.94<-7796 ze=15.465<-10969 Statuses=0009 0009 10:11:00 Msec=750 True Az=116.94 Ze=15.465 Az status=0009 Ze status=0009 10:11:00 Check angles 10:11:00 SkyScan query 10:11:01 SkyScan query done: ret=0 az=99.525<-6635 ze=-5.535<-12369 Statuses=0009 0009 10:11:01 Msec=1500 True Az=99.525 Ze=-5.535 Az status=0009 Ze status=0009 10:11:01 Check angles 10:11:01 SkyScan query 10:11:02 SkyScan query done: ret=0 az=82.035<-5469 ze=-26.475<-13765 Statuses=0009 0009 10:11:02 Msec=2250 True Az=82.035 Ze=-26.475 Az status=0009 Ze status=0009 10:11:02 Check angles 10:11:02 SkyScan query 10:11:02 SkyScan query done: ret=0 az=64.53<-4302 ze=-38.58<-14572 Statuses=0009 0008 10:11:02 Msec=3000 True Az=64.53 Ze=-38.58 Az status=0009 Ze status=0008 10:11:03 Check angles 10:11:03 SkyScan query 10:11:03 SkyScan query done: ret=0 az=46.68<-3112 ze=-38.52<-14568 Statuses=0009 0008 10:11:03 Msec=3750 True Az=46.68 Ze=-38.52 Az status=0009 Ze status=0008 10:11:03 Check angles 10:11:03 SkyScan query 10:11:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:11:04 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:11:04 Message to Master queued w/err=0: serial=61410 error=0 10:11:09 Received message from Master: op=Filter serial=61411 10:11:09 Color wheel filter change from 0 to 0 10:11:09 FLIGetFilterPos err=0 currentPosition=0 10:11:09 FLIGetStepsRemaining err=0 RemainingSteps=0 10:11:09 Filter is already there-color wheel unchanged 10:11:09 Received message from Master: op=Shutter serial=61412 10:11:09 Shutter LASER close 10:11:09 Received message from Camera: op=State serial=61414 10:11:09 GetSingleValue result=40 Value=cccccccc 10:11:09 SkyScan query 10:11:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:11:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:10 Parameters OK 10:11:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:10 Set A/D data flow result=40 10:11:10 Set A/D channel type result=40 10:11:10 Set A/D encoding result=40 10:11:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:10 Set channel filter=0.000000e+000 result=40 10:11:10 Config A/D Result=40 10:11:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:10 Get A/D filter: -9.255963e+061 result=40 10:11:10 Get A/D value=-858993460 result=40 10:11:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:10 Parameters OK 10:11:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:10 Set A/D data flow result=40 10:11:10 Set A/D channel type result=40 10:11:10 Set A/D encoding result=40 10:11:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:10 Set channel filter=0.000000e+000 result=40 10:11:10 Config A/D Result=40 10:11:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:10 Get A/D filter: -9.255963e+061 result=40 10:11:10 Get A/D value=-858993460 result=40 10:11:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:11:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:11:10 Aux= 10:11:10 Message to Camera, serial 61414 queued 10:11:47 Received message from Master: op=PointingHead serial=61427 10:11:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:11:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:11:47 Point started: ret=0 10:11:47 point_skyscan result=0 10:11:48 Check angles 10:11:48 SkyScan query 10:11:48 SkyScan query done: ret=0 az=63.93<-4262 ze=-68.055<-16537 Statuses=0009 0009 10:11:48 Msec=0 True Az=63.93 Ze=-68.055 Az status=0009 Ze status=0009 10:11:48 Check angles 10:11:48 SkyScan query 10:11:49 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.52<-17968 Statuses=0009 0009 10:11:49 Msec=750 True Az=81.54 Ze=-89.52 Az status=0009 Ze status=0009 10:11:49 Check angles 10:11:49 SkyScan query 10:11:50 SkyScan query done: ret=0 az=99.585<-6639 ze=-110.91<-19394 Statuses=0009 0009 10:11:50 Msec=1500 True Az=99.585 Ze=-110.91 Az status=0009 Ze status=0009 10:11:50 Check angles 10:11:50 SkyScan query 10:11:50 SkyScan query done: ret=0 az=117.06<-7804 ze=-131.82<-20788 Statuses=0009 0009 10:11:50 Msec=2250 True Az=117.06 Ze=-131.82 Az status=0009 Ze status=0009 10:11:51 Check angles 10:11:51 SkyScan query 10:11:51 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.555<-21437 Statuses=0009 0008 10:11:51 Msec=3000 True Az=131.07 Ze=-141.555 Az status=0009 Ze status=0008 10:11:51 Check angles 10:11:51 SkyScan query 10:11:52 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 10:11:52 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 10:11:52 Message to Master queued w/err=0: serial=61427 error=0 10:11:57 Received message from Master: op=Filter serial=61428 10:11:57 Color wheel filter change from 0 to 0 10:11:57 FLIGetFilterPos err=0 currentPosition=0 10:11:57 FLIGetStepsRemaining err=0 RemainingSteps=0 10:11:57 Filter is already there-color wheel unchanged 10:11:57 Received message from Master: op=Shutter serial=61429 10:11:57 Shutter LASER close 10:11:57 Received message from Camera: op=State serial=61431 10:11:57 GetSingleValue result=40 Value=cccccccc 10:11:57 SkyScan query 10:11:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:11:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:58 Parameters OK 10:11:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:58 Set A/D data flow result=40 10:11:58 Set A/D channel type result=40 10:11:58 Set A/D encoding result=40 10:11:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:58 Set channel filter=0.000000e+000 result=40 10:11:58 Config A/D Result=40 10:11:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:58 Get A/D filter: -9.255963e+061 result=40 10:11:58 Get A/D value=-858993460 result=40 10:11:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:58 Parameters OK 10:11:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:58 Set A/D data flow result=40 10:11:58 Set A/D channel type result=40 10:11:58 Set A/D encoding result=40 10:11:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:58 Set channel filter=0.000000e+000 result=40 10:11:58 Config A/D Result=40 10:11:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:58 Get A/D filter: -9.255963e+061 result=40 10:11:58 Get A/D value=-858993460 result=40 10:11:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:58 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:11:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:11:58 Aux= 10:11:58 Message to Camera, serial 61431 queued 10:12:35 Received message from Master: op=PointingHead serial=61444 10:12:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:12:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:12:35 Point started: ret=0 10:12:35 point_skyscan result=0 10:12:36 Check angles 10:12:36 SkyScan query 10:12:36 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.06<-23404 Statuses=0009 0009 10:12:36 Msec=0 True Az=113.01 Ze=-171.06 Az status=0009 Ze status=0009 10:12:36 Check angles 10:12:36 SkyScan query 10:12:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:12:37 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:12:37 Message to Master queued w/err=0: serial=61444 error=0 10:12:42 Received message from Master: op=Filter serial=61445 10:12:42 Color wheel filter change from 0 to 0 10:12:42 FLIGetFilterPos err=0 currentPosition=0 10:12:42 FLIGetStepsRemaining err=0 RemainingSteps=0 10:12:42 Filter is already there-color wheel unchanged 10:12:42 Received message from Master: op=Shutter serial=61446 10:12:42 Shutter LASER open 10:12:42 Received message from Camera: op=State serial=61448 10:12:42 GetSingleValue result=40 Value=cccccccc 10:12:42 SkyScan query 10:12:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:12:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:43 Parameters OK 10:12:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:43 Set A/D data flow result=40 10:12:43 Set A/D channel type result=40 10:12:43 Set A/D encoding result=40 10:12:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:43 Set channel filter=0.000000e+000 result=40 10:12:43 Config A/D Result=40 10:12:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:43 Get A/D filter: -9.255963e+061 result=40 10:12:43 Get A/D value=-858993460 result=40 10:12:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:43 Parameters OK 10:12:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:43 Set A/D data flow result=40 10:12:43 Set A/D channel type result=40 10:12:43 Set A/D encoding result=40 10:12:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:43 Set channel filter=0.000000e+000 result=40 10:12:43 Config A/D Result=40 10:12:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:43 Get A/D filter: -9.255963e+061 result=40 10:12:43 Get A/D value=-858993460 result=40 10:12:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:12:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:12:43 Aux= 10:12:43 Message to Camera, serial 61448 queued 10:12:51 Received message from Master: op=Shutter serial=61458 10:12:51 Shutter LASER close 10:12:52 Received message from Master: op=PointingHead serial=61462 10:12:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:12:52 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:12:52 Point started: ret=0 10:12:52 point_skyscan result=0 10:12:53 Check angles 10:12:53 SkyScan query 10:12:54 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.845<-21523 Statuses=0009 0009 10:12:54 Msec=0 True Az=136.35 Ze=-142.845 Az status=0009 Ze status=0009 10:12:54 Check angles 10:12:54 SkyScan query 10:12:54 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.86<-20124 Statuses=0009 0009 10:12:54 Msec=750 True Az=153.81 Ze=-121.86 Az status=0009 Ze status=0009 10:12:55 Check angles 10:12:55 SkyScan query 10:12:55 SkyScan query done: ret=0 az=171.39<-11426 ze=-100.92<-18728 Statuses=0009 0009 10:12:55 Msec=1500 True Az=171.39 Ze=-100.92 Az status=0009 Ze status=0009 10:12:55 Check angles 10:12:55 SkyScan query 10:12:56 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.53<-17302 Statuses=0008 0009 10:12:56 Msec=2250 True Az=176.025 Ze=-79.53 Az status=0008 Ze status=0009 10:12:56 Check angles 10:12:56 SkyScan query 10:12:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.56<-15904 Statuses=0008 0009 10:12:57 Msec=3000 True Az=175.995 Ze=-58.56 Az status=0008 Ze status=0009 10:12:57 Check angles 10:12:57 SkyScan query 10:12:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 10:12:57 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 10:12:57 Message to Master queued w/err=0: serial=61462 error=0 10:13:02 Received message from Master: op=Filter serial=61463 10:13:02 Color wheel filter change from 0 to 0 10:13:02 FLIGetFilterPos err=0 currentPosition=0 10:13:02 FLIGetStepsRemaining err=0 RemainingSteps=0 10:13:02 Filter is already there-color wheel unchanged 10:13:03 Received message from Master: op=Shutter serial=61464 10:13:03 Shutter LASER close 10:13:03 Received message from Camera: op=State serial=61466 10:13:03 GetSingleValue result=40 Value=cccccccc 10:13:03 SkyScan query 10:13:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:13:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:03 Parameters OK 10:13:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:03 Set A/D data flow result=40 10:13:03 Set A/D channel type result=40 10:13:03 Set A/D encoding result=40 10:13:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:03 Set channel filter=0.000000e+000 result=40 10:13:03 Config A/D Result=40 10:13:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:03 Get A/D filter: -9.255963e+061 result=40 10:13:03 Get A/D value=-858993460 result=40 10:13:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:03 Parameters OK 10:13:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:03 Set A/D data flow result=40 10:13:03 Set A/D channel type result=40 10:13:03 Set A/D encoding result=40 10:13:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:03 Set channel filter=0.000000e+000 result=40 10:13:03 Config A/D Result=40 10:13:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:03 Get A/D filter: -9.255963e+061 result=40 10:13:03 Get A/D value=-858993460 result=40 10:13:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:13:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:13:03 Aux= 10:13:03 Message to Camera, serial 61466 queued 10:13:40 Received message from Master: op=PointingHead serial=61479 10:13:40 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:13:40 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:13:41 Point started: ret=0 10:13:41 point_skyscan result=0 10:13:41 Check angles 10:13:41 SkyScan query 10:13:42 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.855<-13457 Statuses=0009 0009 10:13:42 Msec=0 True Az=152.97 Ze=-21.855 Az status=0009 Ze status=0009 10:13:42 Check angles 10:13:42 SkyScan query 10:13:43 SkyScan query done: ret=0 az=135.645<-9043 ze=-0.855<-12057 Statuses=0009 0009 10:13:43 Msec=750 True Az=135.645 Ze=-0.855 Az status=0009 Ze status=0009 10:13:43 Check angles 10:13:43 SkyScan query 10:13:43 SkyScan query done: ret=0 az=118.08<-7872 ze=20.085<-10661 Statuses=0009 0009 10:13:43 Msec=1500 True Az=118.08 Ze=20.085 Az status=0009 Ze status=0009 10:13:44 Check angles 10:13:44 SkyScan query 10:13:44 SkyScan query done: ret=0 az=100.515<-6701 ze=41.04<-9264 Statuses=0009 0009 10:13:44 Msec=2250 True Az=100.515 Ze=41.04 Az status=0009 Ze status=0009 10:13:44 Check angles 10:13:44 SkyScan query 10:13:45 SkyScan query done: ret=0 az=86.04<-5736 ze=51.555<-8563 Statuses=0009 0008 10:13:45 Msec=3000 True Az=86.04 Ze=51.555 Az status=0009 Ze status=0008 10:13:45 Check angles 10:13:45 SkyScan query 10:13:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:13:46 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:13:46 Message to Master queued w/err=0: serial=61479 error=0 10:13:51 Received message from Master: op=Filter serial=61480 10:13:51 Color wheel filter change from 0 to 0 10:13:51 FLIGetFilterPos err=0 currentPosition=0 10:13:51 FLIGetStepsRemaining err=0 RemainingSteps=0 10:13:51 Filter is already there-color wheel unchanged 10:13:51 Received message from Master: op=Shutter serial=61481 10:13:51 Shutter LASER close 10:13:51 Received message from Camera: op=State serial=61483 10:13:51 GetSingleValue result=40 Value=cccccccc 10:13:51 SkyScan query 10:13:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:13:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:51 Parameters OK 10:13:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:51 Set A/D data flow result=40 10:13:51 Set A/D channel type result=40 10:13:51 Set A/D encoding result=40 10:13:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:51 Set channel filter=0.000000e+000 result=40 10:13:51 Config A/D Result=40 10:13:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:51 Get A/D filter: -9.255963e+061 result=40 10:13:51 Get A/D value=-858993460 result=40 10:13:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:51 Parameters OK 10:13:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:51 Set A/D data flow result=40 10:13:51 Set A/D channel type result=40 10:13:51 Set A/D encoding result=40 10:13:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:51 Set channel filter=0.000000e+000 result=40 10:13:51 Config A/D Result=40 10:13:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:51 Get A/D filter: -9.255963e+061 result=40 10:13:51 Get A/D value=-858993460 result=40 10:13:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:13:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:13:51 Aux= 10:13:51 Message to Camera, serial 61483 queued 10:14:28 Received message from Master: op=PointingHead serial=61496 10:14:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:14:28 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:14:29 Point started: ret=0 10:14:29 point_skyscan result=0 10:14:29 Check angles 10:14:29 SkyScan query 10:14:30 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 10:14:30 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 10:14:30 Check angles 10:14:30 SkyScan query 10:14:31 SkyScan query done: ret=0 az=126.72<-8448 ze=38.505<-9433 Statuses=0009 0008 10:14:31 Msec=750 True Az=126.72 Ze=38.505 Az status=0009 Ze status=0008 10:14:31 Check angles 10:14:31 SkyScan query 10:14:32 SkyScan query done: ret=0 az=144.27<-9618 ze=38.505<-9433 Statuses=0009 0008 10:14:32 Msec=1500 True Az=144.27 Ze=38.505 Az status=0009 Ze status=0008 10:14:32 Check angles 10:14:32 SkyScan query 10:14:32 SkyScan query done: ret=0 az=161.58<-10772 ze=38.505<-9433 Statuses=0009 0008 10:14:32 Msec=2250 True Az=161.58 Ze=38.505 Az status=0009 Ze status=0008 10:14:32 Check angles 10:14:32 SkyScan query 10:14:33 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 10:14:33 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 10:14:33 Check angles 10:14:33 SkyScan query 10:14:34 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:14:34 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:14:34 Message to Master queued w/err=0: serial=61496 error=0 10:14:39 Received message from Master: op=Filter serial=61497 10:14:39 Color wheel filter change from 0 to 0 10:14:39 FLIGetFilterPos err=0 currentPosition=0 10:14:39 FLIGetStepsRemaining err=0 RemainingSteps=0 10:14:39 Filter is already there-color wheel unchanged 10:14:39 Received message from Master: op=Shutter serial=61498 10:14:39 Shutter LASER close 10:14:39 Received message from Camera: op=State serial=61500 10:14:39 GetSingleValue result=40 Value=cccccccc 10:14:39 SkyScan query 10:14:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:14:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:40 Parameters OK 10:14:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:40 Set A/D data flow result=40 10:14:40 Set A/D channel type result=40 10:14:40 Set A/D encoding result=40 10:14:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:40 Set channel filter=0.000000e+000 result=40 10:14:40 Config A/D Result=40 10:14:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:40 Get A/D filter: -9.255963e+061 result=40 10:14:40 Get A/D value=-858993460 result=40 10:14:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:40 Parameters OK 10:14:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:40 Set A/D data flow result=40 10:14:40 Set A/D channel type result=40 10:14:40 Set A/D encoding result=40 10:14:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:40 Set channel filter=0.000000e+000 result=40 10:14:40 Config A/D Result=40 10:14:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:40 Get A/D filter: -9.255963e+061 result=40 10:14:40 Get A/D value=-858993460 result=40 10:14:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:14:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:14:40 Aux= 10:14:40 Message to Camera, serial 61500 queued 10:15:16 Received message from Master: op=PointingHead serial=61513 10:15:16 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:15:16 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:15:17 Point started: ret=0 10:15:17 point_skyscan result=0 10:15:18 Check angles 10:15:18 SkyScan query 10:15:18 SkyScan query done: ret=0 az=153.105<-10207 ze=8.805<-11413 Statuses=0009 0009 10:15:18 Msec=0 True Az=153.105 Ze=8.805 Az status=0009 Ze status=0009 10:15:18 Check angles 10:15:18 SkyScan query 10:15:19 SkyScan query done: ret=0 az=135.705<-9047 ze=-12.135<-12809 Statuses=0009 0009 10:15:19 Msec=750 True Az=135.705 Ze=-12.135 Az status=0009 Ze status=0009 10:15:19 Check angles 10:15:19 SkyScan query 10:15:20 SkyScan query done: ret=0 az=118.155<-7877 ze=-33.09<-14206 Statuses=0009 0009 10:15:20 Msec=1500 True Az=118.155 Ze=-33.09 Az status=0009 Ze status=0009 10:15:20 Check angles 10:15:20 SkyScan query 10:15:20 SkyScan query done: ret=0 az=100.59<-6706 ze=-51.51<-15434 Statuses=0009 0009 10:15:20 Msec=2250 True Az=100.59 Ze=-51.51 Az status=0009 Ze status=0009 10:15:21 Check angles 10:15:21 SkyScan query 10:15:21 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 10:15:21 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 10:15:21 Check angles 10:15:21 SkyScan query 10:15:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:15:22 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:15:22 Message to Master queued w/err=0: serial=61513 error=0 10:15:27 Received message from Master: op=Filter serial=61514 10:15:27 Color wheel filter change from 0 to 0 10:15:27 FLIGetFilterPos err=0 currentPosition=0 10:15:27 FLIGetStepsRemaining err=0 RemainingSteps=0 10:15:27 Filter is already there-color wheel unchanged 10:15:27 Received message from Master: op=Shutter serial=61515 10:15:27 Shutter LASER close 10:15:27 Received message from Camera: op=State serial=61517 10:15:27 GetSingleValue result=40 Value=cccccccc 10:15:27 SkyScan query 10:15:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:15:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:28 Parameters OK 10:15:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:28 Set A/D data flow result=40 10:15:28 Set A/D channel type result=40 10:15:28 Set A/D encoding result=40 10:15:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:28 Set channel filter=0.000000e+000 result=40 10:15:28 Config A/D Result=40 10:15:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:28 Get A/D filter: -9.255963e+061 result=40 10:15:28 Get A/D value=-858993460 result=40 10:15:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:28 Parameters OK 10:15:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:28 Set A/D data flow result=40 10:15:28 Set A/D channel type result=40 10:15:28 Set A/D encoding result=40 10:15:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:28 Set channel filter=0.000000e+000 result=40 10:15:28 Config A/D Result=40 10:15:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:28 Get A/D filter: -9.255963e+061 result=40 10:15:28 Get A/D value=-858993460 result=40 10:15:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:15:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:15:28 Aux= 10:15:28 Message to Camera, serial 61517 queued 10:15:29 Received message from Master: op=Identify serial=61518 [UTC 2018-12-11 10:15:54] 10:16:04 Received message from Master: op=PointingHead serial=61533 10:16:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:16:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:16:05 Point started: ret=0 10:16:05 point_skyscan result=0 10:16:06 Check angles 10:16:06 SkyScan query 10:16:06 SkyScan query done: ret=0 az=109.245<-7283 ze=-81.615<-17441 Statuses=0009 0009 10:16:06 Msec=0 True Az=109.245 Ze=-81.615 Az status=0009 Ze status=0009 10:16:06 Check angles 10:16:06 SkyScan query 10:16:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.57<-18838 Statuses=0008 0009 10:16:07 Msec=750 True Az=112.995 Ze=-102.57 Az status=0008 Ze status=0009 10:16:07 Check angles 10:16:07 SkyScan query 10:16:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.525<-20235 Statuses=0008 0009 10:16:08 Msec=1500 True Az=112.995 Ze=-123.525 Az status=0008 Ze status=0009 10:16:08 Check angles 10:16:08 SkyScan query 10:16:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.465<-21631 Statuses=0008 0009 10:16:08 Msec=2250 True Az=112.995 Ze=-144.465 Az status=0008 Ze status=0009 10:16:09 Check angles 10:16:09 SkyScan query 10:16:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.435<-23029 Statuses=0008 0009 10:16:09 Msec=3000 True Az=112.995 Ze=-165.435 Az status=0008 Ze status=0009 10:16:09 Check angles 10:16:09 SkyScan query 10:16:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:16:10 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:16:10 Message to Master queued w/err=0: serial=61533 error=0 10:16:15 Received message from Master: op=Filter serial=61534 10:16:15 Color wheel filter change from 0 to 0 10:16:15 FLIGetFilterPos err=0 currentPosition=0 10:16:15 FLIGetStepsRemaining err=0 RemainingSteps=0 10:16:15 Filter is already there-color wheel unchanged 10:16:15 Received message from Master: op=Shutter serial=61535 10:16:15 Shutter LASER open 10:16:15 Received message from Camera: op=State serial=61537 10:16:15 GetSingleValue result=40 Value=cccccccc 10:16:15 SkyScan query 10:16:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:16:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:16 Parameters OK 10:16:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:16 Set A/D data flow result=40 10:16:16 Set A/D channel type result=40 10:16:16 Set A/D encoding result=40 10:16:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:16 Set channel filter=0.000000e+000 result=40 10:16:16 Config A/D Result=40 10:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:16 Get A/D filter: -9.255963e+061 result=40 10:16:16 Get A/D value=-858993460 result=40 10:16:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:16 Parameters OK 10:16:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:16 Set A/D data flow result=40 10:16:16 Set A/D channel type result=40 10:16:16 Set A/D encoding result=40 10:16:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:16 Set channel filter=0.000000e+000 result=40 10:16:16 Config A/D Result=40 10:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:16 Get A/D filter: -9.255963e+061 result=40 10:16:16 Get A/D value=-858993460 result=40 10:16:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:16:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:16:16 Aux= 10:16:16 Message to Camera, serial 61537 queued 10:16:24 Received message from Master: op=Shutter serial=61547 10:16:24 Shutter LASER close 10:16:25 Received message from Master: op=PointingHead serial=61551 10:16:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:16:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:16:25 Point started: ret=0 10:16:25 point_skyscan result=0 10:16:26 Check angles 10:16:26 SkyScan query 10:16:26 SkyScan query done: ret=0 az=90.135<-6009 ze=157.365<-1509 Statuses=0009 0009 10:16:26 Msec=0 True Az=90.135 Ze=157.365 Az status=0009 Ze status=0009 10:16:27 Check angles 10:16:27 SkyScan query 10:16:27 SkyScan query done: ret=0 az=72.255<-4817 ze=136.065<-2929 Statuses=0009 0009 10:16:27 Msec=750 True Az=72.255 Ze=136.065 Az status=0009 Ze status=0009 10:16:27 Check angles 10:16:27 SkyScan query 10:16:28 SkyScan query done: ret=0 az=54.885<-3659 ze=115.14<-4324 Statuses=0009 0009 10:16:28 Msec=1500 True Az=54.885 Ze=115.14 Az status=0009 Ze status=0009 10:16:28 Check angles 10:16:28 SkyScan query 10:16:29 SkyScan query done: ret=0 az=40.875<-2725 ze=94.14<-5724 Statuses=0009 0009 10:16:29 Msec=2250 True Az=40.875 Ze=94.14 Az status=0009 Ze status=0009 10:16:29 Check angles 10:16:29 SkyScan query 10:16:29 SkyScan query done: ret=0 az=40.995<-2733 ze=73.2<-7120 Statuses=0008 0009 10:16:29 Msec=3000 True Az=40.995 Ze=73.2 Az status=0008 Ze status=0009 10:16:30 Check angles 10:16:30 SkyScan query 10:16:30 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 10:16:30 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 10:16:30 Check angles 10:16:30 SkyScan query 10:16:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:16:31 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:16:31 Message to Master queued w/err=0: serial=61551 error=0 10:16:36 Received message from Master: op=Filter serial=61552 10:16:36 Color wheel filter change from 0 to 0 10:16:36 FLIGetFilterPos err=0 currentPosition=0 10:16:36 FLIGetStepsRemaining err=0 RemainingSteps=0 10:16:36 Filter is already there-color wheel unchanged 10:16:36 Received message from Master: op=Shutter serial=61553 10:16:36 Shutter LASER close 10:16:36 Received message from Camera: op=State serial=61555 10:16:36 GetSingleValue result=40 Value=cccccccc 10:16:36 SkyScan query 10:16:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:16:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:37 Parameters OK 10:16:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:37 Set A/D data flow result=40 10:16:37 Set A/D channel type result=40 10:16:37 Set A/D encoding result=40 10:16:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:37 Set channel filter=0.000000e+000 result=40 10:16:37 Config A/D Result=40 10:16:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:37 Get A/D filter: -9.255963e+061 result=40 10:16:37 Get A/D value=-858993460 result=40 10:16:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:37 Parameters OK 10:16:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:37 Set A/D data flow result=40 10:16:37 Set A/D channel type result=40 10:16:37 Set A/D encoding result=40 10:16:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:37 Set channel filter=0.000000e+000 result=40 10:16:37 Config A/D Result=40 10:16:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:37 Get A/D filter: -9.255963e+061 result=40 10:16:37 Get A/D value=-858993460 result=40 10:16:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:16:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:16:37 Aux= 10:16:37 Message to Camera, serial 61555 queued 10:17:14 Received message from Master: op=PointingHead serial=61568 10:17:14 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:17:14 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:17:14 Point started: ret=0 10:17:14 point_skyscan result=0 10:17:15 Check angles 10:17:15 SkyScan query 10:17:15 SkyScan query done: ret=0 az=63.795<-4253 ze=66.555<-7563 Statuses=0009 0008 10:17:15 Msec=0 True Az=63.795 Ze=66.555 Az status=0009 Ze status=0008 10:17:15 Check angles 10:17:15 SkyScan query 10:17:16 SkyScan query done: ret=0 az=81.105<-5407 ze=66.51<-7566 Statuses=0009 0008 10:17:16 Msec=750 True Az=81.105 Ze=66.51 Az status=0009 Ze status=0008 10:17:16 Check angles 10:17:16 SkyScan query 10:17:17 SkyScan query done: ret=0 az=98.7<-6580 ze=66.495<-7567 Statuses=0009 0008 10:17:17 Msec=1500 True Az=98.7 Ze=66.495 Az status=0009 Ze status=0008 10:17:17 Check angles 10:17:17 SkyScan query 10:17:18 SkyScan query done: ret=0 az=116.265<-7751 ze=66.495<-7567 Statuses=0009 0008 10:17:18 Msec=2250 True Az=116.265 Ze=66.495 Az status=0009 Ze status=0008 10:17:18 Check angles 10:17:18 SkyScan query 10:17:18 SkyScan query done: ret=0 az=133.8<-8920 ze=66.495<-7567 Statuses=0009 0008 10:17:18 Msec=3000 True Az=133.8 Ze=66.495 Az status=0009 Ze status=0008 10:17:18 Check angles 10:17:18 SkyScan query 10:17:19 SkyScan query done: ret=0 az=151.17<-10078 ze=66.495<-7567 Statuses=0009 0008 10:17:19 Msec=3750 True Az=151.17 Ze=66.495 Az status=0009 Ze status=0008 10:17:19 Check angles 10:17:19 SkyScan query 10:17:20 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:17:20 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 10:17:20 Message to Master queued w/err=0: serial=61568 error=0 10:17:25 Received message from Master: op=Filter serial=61569 10:17:25 Color wheel filter change from 0 to 0 10:17:25 FLIGetFilterPos err=0 currentPosition=0 10:17:25 FLIGetStepsRemaining err=0 RemainingSteps=0 10:17:25 Filter is already there-color wheel unchanged 10:17:25 Received message from Master: op=Shutter serial=61570 10:17:25 Shutter LASER close 10:17:25 Received message from Camera: op=State serial=61572 10:17:25 GetSingleValue result=40 Value=cccccccc 10:17:25 SkyScan query 10:17:26 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:17:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:26 Parameters OK 10:17:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:26 Set A/D data flow result=40 10:17:26 Set A/D channel type result=40 10:17:26 Set A/D encoding result=40 10:17:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:26 Set channel filter=0.000000e+000 result=40 10:17:26 Config A/D Result=40 10:17:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:26 Get A/D filter: -9.255963e+061 result=40 10:17:26 Get A/D value=-858993460 result=40 10:17:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:26 Parameters OK 10:17:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:26 Set A/D data flow result=40 10:17:26 Set A/D channel type result=40 10:17:26 Set A/D encoding result=40 10:17:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:26 Set channel filter=0.000000e+000 result=40 10:17:26 Config A/D Result=40 10:17:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:26 Get A/D filter: -9.255963e+061 result=40 10:17:26 Get A/D value=-858993460 result=40 10:17:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:26 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:17:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:17:26 Aux= 10:17:26 Message to Camera, serial 61572 queued 10:18:02 Received message from Master: op=PointingHead serial=61585 10:18:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:18:02 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:18:03 Point started: ret=0 10:18:03 point_skyscan result=0 10:18:04 Check angles 10:18:04 SkyScan query 10:18:04 SkyScan query done: ret=0 az=134.565<-8971 ze=36.21<-9586 Statuses=0009 0009 10:18:04 Msec=0 True Az=134.565 Ze=36.21 Az status=0009 Ze status=0009 10:18:04 Check angles 10:18:04 SkyScan query 10:18:05 SkyScan query done: ret=0 az=117.105<-7807 ze=15.3<-10980 Statuses=0009 0009 10:18:05 Msec=750 True Az=117.105 Ze=15.3 Az status=0009 Ze status=0009 10:18:05 Check angles 10:18:05 SkyScan query 10:18:06 SkyScan query done: ret=0 az=99.615<-6641 ze=-5.685<-12379 Statuses=0009 0009 10:18:06 Msec=1500 True Az=99.615 Ze=-5.685 Az status=0009 Ze status=0009 10:18:06 Check angles 10:18:06 SkyScan query 10:18:06 SkyScan query done: ret=0 az=82.185<-5479 ze=-26.7<-13780 Statuses=0009 0009 10:18:06 Msec=2250 True Az=82.185 Ze=-26.7 Az status=0009 Ze status=0009 10:18:07 Check angles 10:18:07 SkyScan query 10:18:07 SkyScan query done: ret=0 az=64.74<-4316 ze=-38.565<-14571 Statuses=0009 0008 10:18:07 Msec=3000 True Az=64.74 Ze=-38.565 Az status=0009 Ze status=0008 10:18:07 Check angles 10:18:07 SkyScan query 10:18:08 SkyScan query done: ret=0 az=47.295<-3153 ze=-38.535<-14569 Statuses=0009 0008 10:18:08 Msec=3750 True Az=47.295 Ze=-38.535 Az status=0009 Ze status=0008 10:18:08 Check angles 10:18:08 SkyScan query 10:18:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:18:09 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:18:09 Message to Master queued w/err=0: serial=61585 error=0 10:18:14 Received message from Master: op=Filter serial=61586 10:18:14 Color wheel filter change from 0 to 0 10:18:14 FLIGetFilterPos err=0 currentPosition=0 10:18:14 FLIGetStepsRemaining err=0 RemainingSteps=0 10:18:14 Filter is already there-color wheel unchanged 10:18:14 Received message from Master: op=Shutter serial=61587 10:18:14 Shutter LASER close 10:18:14 Received message from Camera: op=State serial=61589 10:18:14 GetSingleValue result=40 Value=cccccccc 10:18:14 SkyScan query 10:18:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:18:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:14 Parameters OK 10:18:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:14 Set A/D data flow result=40 10:18:14 Set A/D channel type result=40 10:18:14 Set A/D encoding result=40 10:18:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:14 Set channel filter=0.000000e+000 result=40 10:18:14 Config A/D Result=40 10:18:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:14 Get A/D filter: -9.255963e+061 result=40 10:18:14 Get A/D value=-858993460 result=40 10:18:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:14 Parameters OK 10:18:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:14 Set A/D data flow result=40 10:18:14 Set A/D channel type result=40 10:18:14 Set A/D encoding result=40 10:18:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:14 Set channel filter=0.000000e+000 result=40 10:18:14 Config A/D Result=40 10:18:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:14 Get A/D filter: -9.255963e+061 result=40 10:18:14 Get A/D value=-858993460 result=40 10:18:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:18:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:18:14 Aux= 10:18:14 Message to Camera, serial 61589 queued 10:18:51 Received message from Master: op=PointingHead serial=61602 10:18:51 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:18:51 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:18:52 Point started: ret=0 10:18:52 point_skyscan result=0 10:18:52 Check angles 10:18:52 SkyScan query 10:18:53 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.4<-16560 Statuses=0009 0009 10:18:53 Msec=0 True Az=64.215 Ze=-68.4 Az status=0009 Ze status=0009 10:18:53 Check angles 10:18:53 SkyScan query 10:18:54 SkyScan query done: ret=0 az=81.855<-5457 ze=-89.85<-17990 Statuses=0009 0009 10:18:54 Msec=750 True Az=81.855 Ze=-89.85 Az status=0009 Ze status=0009 10:18:54 Check angles 10:18:54 SkyScan query 10:18:54 SkyScan query done: ret=0 az=99.51<-6634 ze=-110.775<-19385 Statuses=0009 0009 10:18:54 Msec=1500 True Az=99.51 Ze=-110.775 Az status=0009 Ze status=0009 10:18:55 Check angles 10:18:55 SkyScan query 10:18:55 SkyScan query done: ret=0 az=117.06<-7804 ze=-131.73<-20782 Statuses=0009 0009 10:18:55 Msec=2250 True Az=117.06 Ze=-131.73 Az status=0009 Ze status=0009 10:18:55 Check angles 10:18:55 SkyScan query 10:18:56 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 10:18:56 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 10:18:56 Check angles 10:18:56 SkyScan query 10:18:57 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:18:57 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:18:57 Message to Master queued w/err=0: serial=61602 error=0 10:19:02 Received message from Master: op=Filter serial=61603 10:19:02 Color wheel filter change from 0 to 0 10:19:02 FLIGetFilterPos err=0 currentPosition=0 10:19:02 FLIGetStepsRemaining err=0 RemainingSteps=0 10:19:02 Filter is already there-color wheel unchanged 10:19:02 Received message from Master: op=Shutter serial=61604 10:19:02 Shutter LASER close 10:19:02 Received message from Camera: op=State serial=61606 10:19:02 GetSingleValue result=40 Value=cccccccc 10:19:02 SkyScan query 10:19:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:19:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:03 Parameters OK 10:19:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:03 Set A/D data flow result=40 10:19:03 Set A/D channel type result=40 10:19:03 Set A/D encoding result=40 10:19:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:03 Set channel filter=0.000000e+000 result=40 10:19:03 Config A/D Result=40 10:19:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:03 Get A/D filter: -9.255963e+061 result=40 10:19:03 Get A/D value=-858993460 result=40 10:19:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:03 Parameters OK 10:19:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:03 Set A/D data flow result=40 10:19:03 Set A/D channel type result=40 10:19:03 Set A/D encoding result=40 10:19:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:03 Set channel filter=0.000000e+000 result=40 10:19:03 Config A/D Result=40 10:19:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:03 Get A/D filter: -9.255963e+061 result=40 10:19:03 Get A/D value=-858993460 result=40 10:19:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:03 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:19:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:19:03 Aux= 10:19:03 Message to Camera, serial 61606 queued 10:19:38 Received message from Master: op=PointingHead serial=61618 10:19:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:19:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:19:39 Point started: ret=0 10:19:39 point_skyscan result=0 10:19:40 Check angles 10:19:40 SkyScan query 10:19:40 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 10:19:40 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 10:19:40 Check angles 10:19:40 SkyScan query 10:19:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:19:41 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:19:41 Message to Master queued w/err=0: serial=61618 error=0 10:19:46 Received message from Master: op=Filter serial=61619 10:19:46 Color wheel filter change from 0 to 0 10:19:46 FLIGetFilterPos err=0 currentPosition=0 10:19:46 FLIGetStepsRemaining err=0 RemainingSteps=0 10:19:46 Filter is already there-color wheel unchanged 10:19:46 Received message from Master: op=Shutter serial=61620 10:19:46 Shutter LASER open 10:19:46 Received message from Camera: op=State serial=61622 10:19:46 GetSingleValue result=40 Value=cccccccc 10:19:46 SkyScan query 10:19:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:19:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:47 Parameters OK 10:19:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:47 Set A/D data flow result=40 10:19:47 Set A/D channel type result=40 10:19:47 Set A/D encoding result=40 10:19:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:47 Set channel filter=0.000000e+000 result=40 10:19:47 Config A/D Result=40 10:19:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:47 Get A/D filter: -9.255963e+061 result=40 10:19:47 Get A/D value=-858993460 result=40 10:19:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:47 Parameters OK 10:19:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:47 Set A/D data flow result=40 10:19:47 Set A/D channel type result=40 10:19:47 Set A/D encoding result=40 10:19:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:47 Set channel filter=0.000000e+000 result=40 10:19:47 Config A/D Result=40 10:19:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:47 Get A/D filter: -9.255963e+061 result=40 10:19:47 Get A/D value=-858993460 result=40 10:19:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:19:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:19:47 Aux= 10:19:47 Message to Camera, serial 61622 queued 10:19:55 Received message from Master: op=Shutter serial=61632 10:19:55 Shutter LASER close 10:19:56 Received message from Master: op=PointingHead serial=61636 10:19:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:19:56 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:19:56 Point started: ret=0 10:19:56 point_skyscan result=0 10:19:57 Check angles 10:19:57 SkyScan query 10:19:57 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.085<-21539 Statuses=0009 0009 10:19:57 Msec=0 True Az=136.155 Ze=-143.085 Az status=0009 Ze status=0009 10:19:58 Check angles 10:19:58 SkyScan query 10:19:58 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.595<-20173 Statuses=0009 0009 10:19:58 Msec=750 True Az=153.24 Ze=-122.595 Az status=0009 Ze status=0009 10:19:58 Check angles 10:19:58 SkyScan query 10:19:59 SkyScan query done: ret=0 az=170.73<-11382 ze=-101.67<-18778 Statuses=0009 0009 10:19:59 Msec=1500 True Az=170.73 Ze=-101.67 Az status=0009 Ze status=0009 10:19:59 Check angles 10:19:59 SkyScan query 10:20:00 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.22<-17348 Statuses=0008 0009 10:20:00 Msec=2250 True Az=176.025 Ze=-80.22 Az status=0008 Ze status=0009 10:20:00 Check angles 10:20:00 SkyScan query 10:20:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.265<-15951 Statuses=0008 0009 10:20:00 Msec=3000 True Az=175.995 Ze=-59.265 Az status=0008 Ze status=0009 10:20:01 Check angles 10:20:01 SkyScan query 10:20:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 10:20:01 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 10:20:01 Message to Master queued w/err=0: serial=61636 error=0 10:20:06 Received message from Master: op=Filter serial=61637 10:20:06 Color wheel filter change from 0 to 0 10:20:06 FLIGetFilterPos err=0 currentPosition=0 10:20:06 FLIGetStepsRemaining err=0 RemainingSteps=0 10:20:06 Filter is already there-color wheel unchanged 10:20:06 Received message from Master: op=Shutter serial=61638 10:20:06 Shutter LASER close 10:20:07 Received message from Camera: op=State serial=61640 10:20:07 GetSingleValue result=40 Value=cccccccc 10:20:07 SkyScan query 10:20:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:20:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:07 Parameters OK 10:20:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:07 Set A/D data flow result=40 10:20:07 Set A/D channel type result=40 10:20:07 Set A/D encoding result=40 10:20:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:07 Set channel filter=0.000000e+000 result=40 10:20:07 Config A/D Result=40 10:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:07 Get A/D filter: -9.255963e+061 result=40 10:20:07 Get A/D value=-858993460 result=40 10:20:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:07 Parameters OK 10:20:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:07 Set A/D data flow result=40 10:20:07 Set A/D channel type result=40 10:20:07 Set A/D encoding result=40 10:20:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:07 Set channel filter=0.000000e+000 result=40 10:20:07 Config A/D Result=40 10:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:07 Get A/D filter: -9.255963e+061 result=40 10:20:07 Get A/D value=-858993460 result=40 10:20:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:20:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:20:07 Aux= 10:20:07 Message to Camera, serial 61640 queued 10:20:44 Received message from Master: op=PointingHead serial=61653 10:20:44 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:20:44 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:20:44 Point started: ret=0 10:20:44 point_skyscan result=0 10:20:45 Check angles 10:20:45 SkyScan query 10:20:46 SkyScan query done: ret=0 az=152.79<-10186 ze=-21.705<-13447 Statuses=0009 0009 10:20:46 Msec=0 True Az=152.79 Ze=-21.705 Az status=0009 Ze status=0009 10:20:46 Check angles 10:20:46 SkyScan query 10:20:46 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.735<-12049 Statuses=0009 0009 10:20:46 Msec=750 True Az=135.45 Ze=-0.735 Az status=0009 Ze status=0009 10:20:47 Check angles 10:20:47 SkyScan query 10:20:47 SkyScan query done: ret=0 az=117.48<-7832 ze=20.61<-10626 Statuses=0009 0009 10:20:47 Msec=1500 True Az=117.48 Ze=20.61 Az status=0009 Ze status=0009 10:20:47 Check angles 10:20:47 SkyScan query 10:20:48 SkyScan query done: ret=0 az=100.08<-6672 ze=41.595<-9227 Statuses=0009 0009 10:20:48 Msec=2250 True Az=100.08 Ze=41.595 Az status=0009 Ze status=0009 10:20:48 Check angles 10:20:48 SkyScan query 10:20:49 SkyScan query done: ret=0 az=86.055<-5737 ze=51.57<-8562 Statuses=0009 0008 10:20:49 Msec=3000 True Az=86.055 Ze=51.57 Az status=0009 Ze status=0008 10:20:49 Check angles 10:20:49 SkyScan query 10:20:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:20:49 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:20:49 Message to Master queued w/err=0: serial=61653 error=0 10:20:54 Received message from Master: op=Filter serial=61654 10:20:54 Color wheel filter change from 0 to 0 10:20:54 FLIGetFilterPos err=0 currentPosition=0 10:20:54 FLIGetStepsRemaining err=0 RemainingSteps=0 10:20:54 Filter is already there-color wheel unchanged 10:20:55 Received message from Master: op=Shutter serial=61655 10:20:55 Shutter LASER close 10:20:55 Received message from Camera: op=State serial=61657 10:20:55 GetSingleValue result=40 Value=cccccccc 10:20:55 SkyScan query 10:20:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:20:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:55 Parameters OK 10:20:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:55 Set A/D data flow result=40 10:20:55 Set A/D channel type result=40 10:20:55 Set A/D encoding result=40 10:20:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:55 Set channel filter=0.000000e+000 result=40 10:20:55 Config A/D Result=40 10:20:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:55 Get A/D filter: -9.255963e+061 result=40 10:20:55 Get A/D value=-858993460 result=40 10:20:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:55 Parameters OK 10:20:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:55 Set A/D data flow result=40 10:20:55 Set A/D channel type result=40 10:20:55 Set A/D encoding result=40 10:20:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:55 Set channel filter=0.000000e+000 result=40 10:20:55 Config A/D Result=40 10:20:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:55 Get A/D filter: -9.255963e+061 result=40 10:20:55 Get A/D value=-858993460 result=40 10:20:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:20:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:20:55 Aux= 10:20:55 Message to Camera, serial 61657 queued 10:21:32 Received message from Master: op=PointingHead serial=61670 10:21:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:21:32 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:21:32 Point started: ret=0 10:21:32 point_skyscan result=0 10:21:33 Check angles 10:21:33 SkyScan query 10:21:34 SkyScan query done: ret=0 az=109.47<-7298 ze=38.49<-9434 Statuses=0009 0008 10:21:34 Msec=0 True Az=109.47 Ze=38.49 Az status=0009 Ze status=0008 10:21:34 Check angles 10:21:34 SkyScan query 10:21:34 SkyScan query done: ret=0 az=126.945<-8463 ze=38.505<-9433 Statuses=0009 0008 10:21:34 Msec=750 True Az=126.945 Ze=38.505 Az status=0009 Ze status=0008 10:21:35 Check angles 10:21:35 SkyScan query 10:21:35 SkyScan query done: ret=0 az=144.51<-9634 ze=38.505<-9433 Statuses=0009 0008 10:21:35 Msec=1500 True Az=144.51 Ze=38.505 Az status=0009 Ze status=0008 10:21:35 Check angles 10:21:35 SkyScan query 10:21:36 SkyScan query done: ret=0 az=162.3<-10820 ze=38.505<-9433 Statuses=0009 0008 10:21:36 Msec=2250 True Az=162.3 Ze=38.505 Az status=0009 Ze status=0008 10:21:36 Check angles 10:21:36 SkyScan query 10:21:37 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:21:37 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:21:37 Check angles 10:21:37 SkyScan query 10:21:38 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:21:38 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:21:38 Message to Master queued w/err=0: serial=61670 error=0 10:21:43 Received message from Master: op=Filter serial=61671 10:21:43 Color wheel filter change from 0 to 0 10:21:43 FLIGetFilterPos err=0 currentPosition=0 10:21:43 FLIGetStepsRemaining err=0 RemainingSteps=0 10:21:43 Filter is already there-color wheel unchanged 10:21:43 Received message from Master: op=Shutter serial=61672 10:21:43 Shutter LASER close 10:21:43 Received message from Camera: op=State serial=61674 10:21:43 GetSingleValue result=40 Value=cccccccc 10:21:43 SkyScan query 10:21:43 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:21:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:43 Parameters OK 10:21:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:43 Set A/D data flow result=40 10:21:43 Set A/D channel type result=40 10:21:43 Set A/D encoding result=40 10:21:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:43 Set channel filter=0.000000e+000 result=40 10:21:43 Config A/D Result=40 10:21:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:43 Get A/D filter: -9.255963e+061 result=40 10:21:43 Get A/D value=-858993460 result=40 10:21:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:43 Parameters OK 10:21:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:43 Set A/D data flow result=40 10:21:43 Set A/D channel type result=40 10:21:43 Set A/D encoding result=40 10:21:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:43 Set channel filter=0.000000e+000 result=40 10:21:43 Config A/D Result=40 10:21:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:43 Get A/D filter: -9.255963e+061 result=40 10:21:43 Get A/D value=-858993460 result=40 10:21:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:21:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:21:43 Aux= 10:21:43 Message to Camera, serial 61674 queued 10:22:20 Received message from Master: op=PointingHead serial=61687 10:22:20 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:22:20 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:22:20 Point started: ret=0 10:22:20 point_skyscan result=0 10:22:21 Check angles 10:22:21 SkyScan query 10:22:22 SkyScan query done: ret=0 az=152.625<-10175 ze=8.205<-11453 Statuses=0009 0009 10:22:22 Msec=0 True Az=152.625 Ze=8.205 Az status=0009 Ze status=0009 10:22:22 Check angles 10:22:22 SkyScan query 10:22:23 SkyScan query done: ret=0 az=135.165<-9011 ze=-12.735<-12849 Statuses=0009 0009 10:22:23 Msec=750 True Az=135.165 Ze=-12.735 Az status=0009 Ze status=0009 10:22:23 Check angles 10:22:23 SkyScan query 10:22:23 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.675<-14245 Statuses=0009 0009 10:22:23 Msec=1500 True Az=117.54 Ze=-33.675 Az status=0009 Ze status=0009 10:22:24 Check angles 10:22:24 SkyScan query 10:22:24 SkyScan query done: ret=0 az=99.81<-6654 ze=-51.57<-15438 Statuses=0009 0009 10:22:24 Msec=2250 True Az=99.81 Ze=-51.57 Az status=0009 Ze status=0009 10:22:24 Check angles 10:22:24 SkyScan query 10:22:25 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 10:22:25 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 10:22:25 Check angles 10:22:25 SkyScan query 10:22:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:22:26 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:22:26 Message to Master queued w/err=0: serial=61687 error=0 10:22:31 Received message from Master: op=Filter serial=61688 10:22:31 Color wheel filter change from 0 to 0 10:22:31 FLIGetFilterPos err=0 currentPosition=0 10:22:31 FLIGetStepsRemaining err=0 RemainingSteps=0 10:22:31 Filter is already there-color wheel unchanged 10:22:31 Received message from Master: op=Shutter serial=61689 10:22:31 Shutter LASER close 10:22:31 Received message from Camera: op=State serial=61691 10:22:31 GetSingleValue result=40 Value=cccccccc 10:22:31 SkyScan query 10:22:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:22:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:31 Parameters OK 10:22:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:31 Set A/D data flow result=40 10:22:31 Set A/D channel type result=40 10:22:31 Set A/D encoding result=40 10:22:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:31 Set channel filter=0.000000e+000 result=40 10:22:31 Config A/D Result=40 10:22:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:31 Get A/D filter: -9.255963e+061 result=40 10:22:31 Get A/D value=-858993460 result=40 10:22:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:31 Parameters OK 10:22:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:31 Set A/D data flow result=40 10:22:31 Set A/D channel type result=40 10:22:31 Set A/D encoding result=40 10:22:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:31 Set channel filter=0.000000e+000 result=40 10:22:31 Config A/D Result=40 10:22:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:31 Get A/D filter: -9.255963e+061 result=40 10:22:31 Get A/D value=-858993460 result=40 10:22:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:22:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:22:31 Aux= 10:22:31 Message to Camera, serial 61691 queued 10:23:08 Received message from Master: op=PointingHead serial=61704 10:23:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:23:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:23:09 Point started: ret=0 10:23:09 point_skyscan result=0 10:23:09 Check angles 10:23:09 SkyScan query 10:23:10 SkyScan query done: ret=0 az=109.245<-7283 ze=-81.615<-17441 Statuses=0009 0009 10:23:10 Msec=0 True Az=109.245 Ze=-81.615 Az status=0009 Ze status=0009 10:23:10 Check angles 10:23:10 SkyScan query 10:23:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.57<-18838 Statuses=0008 0009 10:23:11 Msec=750 True Az=112.995 Ze=-102.57 Az status=0008 Ze status=0009 10:23:11 Check angles 10:23:11 SkyScan query 10:23:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.54<-20236 Statuses=0008 0009 10:23:11 Msec=1500 True Az=112.995 Ze=-123.54 Az status=0008 Ze status=0009 10:23:12 Check angles 10:23:12 SkyScan query 10:23:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.48<-21632 Statuses=0008 0009 10:23:12 Msec=2250 True Az=112.995 Ze=-144.48 Az status=0008 Ze status=0009 10:23:12 Check angles 10:23:12 SkyScan query 10:23:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.42<-23028 Statuses=0008 0009 10:23:13 Msec=3000 True Az=112.995 Ze=-165.42 Az status=0008 Ze status=0009 10:23:13 Check angles 10:23:13 SkyScan query 10:23:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:23:14 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:23:14 Message to Master queued w/err=0: serial=61704 error=0 10:23:19 Received message from Master: op=Filter serial=61705 10:23:19 Color wheel filter change from 0 to 0 10:23:19 FLIGetFilterPos err=0 currentPosition=0 10:23:19 FLIGetStepsRemaining err=0 RemainingSteps=0 10:23:19 Filter is already there-color wheel unchanged 10:23:19 Received message from Master: op=Shutter serial=61706 10:23:19 Shutter LASER open 10:23:19 Received message from Camera: op=State serial=61708 10:23:19 GetSingleValue result=40 Value=cccccccc 10:23:19 SkyScan query 10:23:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:23:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:20 Parameters OK 10:23:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:20 Set A/D data flow result=40 10:23:20 Set A/D channel type result=40 10:23:20 Set A/D encoding result=40 10:23:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:20 Set channel filter=0.000000e+000 result=40 10:23:20 Config A/D Result=40 10:23:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:20 Get A/D filter: -9.255963e+061 result=40 10:23:20 Get A/D value=-858993460 result=40 10:23:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:20 Parameters OK 10:23:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:20 Set A/D data flow result=40 10:23:20 Set A/D channel type result=40 10:23:20 Set A/D encoding result=40 10:23:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:20 Set channel filter=0.000000e+000 result=40 10:23:20 Config A/D Result=40 10:23:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:20 Get A/D filter: -9.255963e+061 result=40 10:23:20 Get A/D value=-858993460 result=40 10:23:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:23:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:23:20 Aux= 10:23:20 Message to Camera, serial 61708 queued 10:23:28 Received message from Master: op=Shutter serial=61718 10:23:28 Shutter LASER close 10:23:29 Received message from Master: op=PointingHead serial=61722 10:23:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:23:29 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:23:29 Point started: ret=0 10:23:29 point_skyscan result=0 10:23:30 Check angles 10:23:30 SkyScan query 10:23:30 SkyScan query done: ret=0 az=90.195<-6013 ze=157.5<-1500 Statuses=0009 0009 10:23:30 Msec=0 True Az=90.195 Ze=157.5 Az status=0009 Ze status=0009 10:23:30 Check angles 10:23:30 SkyScan query 10:23:31 SkyScan query done: ret=0 az=72.675<-4845 ze=136.53<-2898 Statuses=0009 0009 10:23:31 Msec=750 True Az=72.675 Ze=136.53 Az status=0009 Ze status=0009 10:23:31 Check angles 10:23:31 SkyScan query 10:23:32 SkyScan query done: ret=0 az=55.2<-3680 ze=115.605<-4293 Statuses=0009 0009 10:23:32 Msec=1500 True Az=55.2 Ze=115.605 Az status=0009 Ze status=0009 10:23:32 Check angles 10:23:32 SkyScan query 10:23:32 SkyScan query done: ret=0 az=40.875<-2725 ze=94.65<-5690 Statuses=0009 0009 10:23:32 Msec=2250 True Az=40.875 Ze=94.65 Az status=0009 Ze status=0009 10:23:33 Check angles 10:23:33 SkyScan query 10:23:33 SkyScan query done: ret=0 az=40.995<-2733 ze=73.695<-7087 Statuses=0008 0009 10:23:33 Msec=3000 True Az=40.995 Ze=73.695 Az status=0008 Ze status=0009 10:23:33 Check angles 10:23:33 SkyScan query 10:23:34 SkyScan query done: ret=0 az=40.995<-2733 ze=52.725<-8485 Statuses=0008 0009 10:23:34 Msec=3750 True Az=40.995 Ze=52.725 Az status=0008 Ze status=0009 10:23:34 Check angles 10:23:34 SkyScan query 10:23:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:23:35 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:23:35 Message to Master queued w/err=0: serial=61722 error=0 10:23:40 Received message from Master: op=Filter serial=61723 10:23:40 Color wheel filter change from 0 to 0 10:23:40 FLIGetFilterPos err=0 currentPosition=0 10:23:40 FLIGetStepsRemaining err=0 RemainingSteps=0 10:23:40 Filter is already there-color wheel unchanged 10:23:40 Received message from Master: op=Shutter serial=61724 10:23:40 Shutter LASER close 10:23:40 Received message from Camera: op=State serial=61726 10:23:40 GetSingleValue result=40 Value=cccccccc 10:23:40 SkyScan query 10:23:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:23:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:41 Parameters OK 10:23:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:41 Set A/D data flow result=40 10:23:41 Set A/D channel type result=40 10:23:41 Set A/D encoding result=40 10:23:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:41 Set channel filter=0.000000e+000 result=40 10:23:41 Config A/D Result=40 10:23:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:41 Get A/D filter: -9.255963e+061 result=40 10:23:41 Get A/D value=-858993460 result=40 10:23:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:41 Parameters OK 10:23:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:41 Set A/D data flow result=40 10:23:41 Set A/D channel type result=40 10:23:41 Set A/D encoding result=40 10:23:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:41 Set channel filter=0.000000e+000 result=40 10:23:41 Config A/D Result=40 10:23:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:41 Get A/D filter: -9.255963e+061 result=40 10:23:41 Get A/D value=-858993460 result=40 10:23:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:23:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:23:41 Aux= 10:23:41 Message to Camera, serial 61726 queued 10:24:17 Received message from Master: op=PointingHead serial=61739 10:24:17 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:24:17 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:24:18 Point started: ret=0 10:24:18 point_skyscan result=0 10:24:19 Check angles 10:24:19 SkyScan query 10:24:19 SkyScan query done: ret=0 az=63.945<-4263 ze=66.555<-7563 Statuses=0009 0008 10:24:19 Msec=0 True Az=63.945 Ze=66.555 Az status=0009 Ze status=0008 10:24:19 Check angles 10:24:19 SkyScan query 10:24:20 SkyScan query done: ret=0 az=81.3<-5420 ze=66.495<-7567 Statuses=0009 0008 10:24:20 Msec=750 True Az=81.3 Ze=66.495 Az status=0009 Ze status=0008 10:24:20 Check angles 10:24:20 SkyScan query 10:24:21 SkyScan query done: ret=0 az=98.97<-6598 ze=66.495<-7567 Statuses=0009 0008 10:24:21 Msec=1500 True Az=98.97 Ze=66.495 Az status=0009 Ze status=0008 10:24:21 Check angles 10:24:21 SkyScan query 10:24:21 SkyScan query done: ret=0 az=116.445<-7763 ze=66.495<-7567 Statuses=0009 0008 10:24:21 Msec=2250 True Az=116.445 Ze=66.495 Az status=0009 Ze status=0008 10:24:22 Check angles 10:24:22 SkyScan query 10:24:22 SkyScan query done: ret=0 az=133.995<-8933 ze=66.495<-7567 Statuses=0009 0008 10:24:22 Msec=3000 True Az=133.995 Ze=66.495 Az status=0009 Ze status=0008 10:24:22 Check angles 10:24:22 SkyScan query 10:24:23 SkyScan query done: ret=0 az=151.44<-10096 ze=66.495<-7567 Statuses=0009 0008 10:24:23 Msec=3750 True Az=151.44 Ze=66.495 Az status=0009 Ze status=0008 10:24:23 Check angles 10:24:23 SkyScan query 10:24:24 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:24:24 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 10:24:24 Message to Master queued w/err=0: serial=61739 error=0 10:24:29 Received message from Master: op=Filter serial=61740 10:24:29 Color wheel filter change from 0 to 0 10:24:29 FLIGetFilterPos err=0 currentPosition=0 10:24:29 FLIGetStepsRemaining err=0 RemainingSteps=0 10:24:29 Filter is already there-color wheel unchanged 10:24:29 Received message from Master: op=Shutter serial=61741 10:24:29 Shutter LASER close 10:24:29 Received message from Camera: op=State serial=61743 10:24:29 GetSingleValue result=40 Value=cccccccc 10:24:29 SkyScan query 10:24:29 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:24:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:29 Parameters OK 10:24:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:29 Set A/D data flow result=40 10:24:29 Set A/D channel type result=40 10:24:29 Set A/D encoding result=40 10:24:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:29 Set channel filter=0.000000e+000 result=40 10:24:29 Config A/D Result=40 10:24:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:29 Get A/D filter: -9.255963e+061 result=40 10:24:29 Get A/D value=-858993460 result=40 10:24:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:29 Parameters OK 10:24:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:29 Set A/D data flow result=40 10:24:29 Set A/D channel type result=40 10:24:29 Set A/D encoding result=40 10:24:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:29 Set channel filter=0.000000e+000 result=40 10:24:29 Config A/D Result=40 10:24:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:29 Get A/D filter: -9.255963e+061 result=40 10:24:29 Get A/D value=-858993460 result=40 10:24:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:29 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:24:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:24:29 Aux= 10:24:29 Message to Camera, serial 61743 queued 10:25:06 Received message from Master: op=PointingHead serial=61756 10:25:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:25:06 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:25:07 Point started: ret=0 10:25:07 point_skyscan result=0 10:25:07 Check angles 10:25:07 SkyScan query 10:25:08 SkyScan query done: ret=0 az=134.985<-8999 ze=36.765<-9549 Statuses=0009 0009 10:25:08 Msec=0 True Az=134.985 Ze=36.765 Az status=0009 Ze status=0009 10:25:08 Check angles 10:25:08 SkyScan query 10:25:09 SkyScan query done: ret=0 az=117.525<-7835 ze=15.795<-10947 Statuses=0009 0009 10:25:09 Msec=750 True Az=117.525 Ze=15.795 Az status=0009 Ze status=0009 10:25:09 Check angles 10:25:09 SkyScan query 10:25:09 SkyScan query done: ret=0 az=100.14<-6676 ze=-5.175<-12345 Statuses=0009 0009 10:25:09 Msec=1500 True Az=100.14 Ze=-5.175 Az status=0009 Ze status=0009 10:25:10 Check angles 10:25:10 SkyScan query 10:25:10 SkyScan query done: ret=0 az=82.59<-5506 ze=-26.13<-13742 Statuses=0009 0009 10:25:10 Msec=2250 True Az=82.59 Ze=-26.13 Az status=0009 Ze status=0009 10:25:10 Check angles 10:25:10 SkyScan query 10:25:11 SkyScan query done: ret=0 az=65.145<-4343 ze=-38.58<-14572 Statuses=0009 0008 10:25:11 Msec=3000 True Az=65.145 Ze=-38.58 Az status=0009 Ze status=0008 10:25:11 Check angles 10:25:11 SkyScan query 10:25:12 SkyScan query done: ret=0 az=47.625<-3175 ze=-38.52<-14568 Statuses=0009 0008 10:25:12 Msec=3750 True Az=47.625 Ze=-38.52 Az status=0009 Ze status=0008 10:25:12 Check angles 10:25:12 SkyScan query 10:25:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:25:12 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:25:12 Message to Master queued w/err=0: serial=61756 error=0 10:25:17 Received message from Master: op=Filter serial=61757 10:25:17 Color wheel filter change from 0 to 0 10:25:17 FLIGetFilterPos err=0 currentPosition=0 10:25:17 FLIGetStepsRemaining err=0 RemainingSteps=0 10:25:17 Filter is already there-color wheel unchanged 10:25:18 Received message from Master: op=Shutter serial=61758 10:25:18 Shutter LASER close 10:25:18 Received message from Camera: op=State serial=61760 10:25:18 GetSingleValue result=40 Value=cccccccc 10:25:18 SkyScan query 10:25:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:25:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:18 Parameters OK 10:25:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:18 Set A/D data flow result=40 10:25:18 Set A/D channel type result=40 10:25:18 Set A/D encoding result=40 10:25:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:18 Set channel filter=0.000000e+000 result=40 10:25:18 Config A/D Result=40 10:25:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:18 Get A/D filter: -9.255963e+061 result=40 10:25:18 Get A/D value=-858993460 result=40 10:25:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:18 Parameters OK 10:25:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:18 Set A/D data flow result=40 10:25:18 Set A/D channel type result=40 10:25:18 Set A/D encoding result=40 10:25:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:18 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-11 10:25:18] 10:25:18 Config A/D Result=40 10:25:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:18 Get A/D filter: -9.255963e+061 result=40 10:25:18 Get A/D value=-858993460 result=40 10:25:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:25:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:25:18 Aux= 10:25:18 Message to Camera, serial 61760 queued 10:25:54 Received message from Master: op=PointingHead serial=61772 10:25:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:25:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:25:55 Point started: ret=0 10:25:55 point_skyscan result=0 10:25:55 Check angles 10:25:55 SkyScan query 10:25:56 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.745<-16583 Statuses=0009 0009 10:25:56 Msec=0 True Az=64.425 Ze=-68.745 Az status=0009 Ze status=0009 10:25:56 Check angles 10:25:56 SkyScan query 10:25:57 SkyScan query done: ret=0 az=81.885<-5459 ze=-89.715<-17981 Statuses=0009 0009 10:25:57 Msec=750 True Az=81.885 Ze=-89.715 Az status=0009 Ze status=0009 10:25:57 Check angles 10:25:57 SkyScan query 10:25:57 SkyScan query done: ret=0 az=99.48<-6632 ze=-110.685<-19379 Statuses=0009 0009 10:25:57 Msec=1500 True Az=99.48 Ze=-110.685 Az status=0009 Ze status=0009 10:25:58 Check angles 10:25:58 SkyScan query 10:25:58 SkyScan query done: ret=0 az=116.985<-7799 ze=-131.595<-20773 Statuses=0009 0009 10:25:58 Msec=2250 True Az=116.985 Ze=-131.595 Az status=0009 Ze status=0009 10:25:58 Check angles 10:25:58 SkyScan query 10:25:59 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.555<-21437 Statuses=0009 0008 10:25:59 Msec=3000 True Az=131.175 Ze=-141.555 Az status=0009 Ze status=0008 10:25:59 Check angles 10:25:59 SkyScan query 10:26:00 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 10:26:00 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 10:26:00 Message to Master queued w/err=0: serial=61772 error=0 10:26:05 Received message from Master: op=Filter serial=61773 10:26:05 Color wheel filter change from 0 to 0 10:26:05 FLIGetFilterPos err=0 currentPosition=0 10:26:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:26:05 Filter is already there-color wheel unchanged 10:26:05 Received message from Master: op=Shutter serial=61774 10:26:05 Shutter LASER close 10:26:05 Received message from Camera: op=State serial=61776 10:26:05 GetSingleValue result=40 Value=cccccccc 10:26:05 SkyScan query 10:26:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:26:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:05 Parameters OK 10:26:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:05 Set A/D data flow result=40 10:26:05 Set A/D channel type result=40 10:26:05 Set A/D encoding result=40 10:26:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:05 Set channel filter=0.000000e+000 result=40 10:26:05 Config A/D Result=40 10:26:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:05 Get A/D filter: -9.255963e+061 result=40 10:26:05 Get A/D value=-858993460 result=40 10:26:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:05 Parameters OK 10:26:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:05 Set A/D data flow result=40 10:26:05 Set A/D channel type result=40 10:26:05 Set A/D encoding result=40 10:26:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:05 Set channel filter=0.000000e+000 result=40 10:26:05 Config A/D Result=40 10:26:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:05 Get A/D filter: -9.255963e+061 result=40 10:26:05 Get A/D value=-858993460 result=40 10:26:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:05 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:26:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:26:05 Aux= 10:26:05 Message to Camera, serial 61776 queued 10:26:42 Received message from Master: op=PointingHead serial=61789 10:26:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:26:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:26:43 Point started: ret=0 10:26:43 point_skyscan result=0 10:26:43 Check angles 10:26:43 SkyScan query 10:26:44 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.375<-23425 Statuses=0009 0009 10:26:44 Msec=0 True Az=113.01 Ze=-171.375 Az status=0009 Ze status=0009 10:26:44 Check angles 10:26:44 SkyScan query 10:26:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:26:45 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:26:45 Message to Master queued w/err=0: serial=61789 error=0 10:26:50 Received message from Master: op=Filter serial=61790 10:26:50 Color wheel filter change from 0 to 0 10:26:50 FLIGetFilterPos err=0 currentPosition=0 10:26:50 FLIGetStepsRemaining err=0 RemainingSteps=0 10:26:50 Filter is already there-color wheel unchanged 10:26:50 Received message from Master: op=Shutter serial=61791 10:26:50 Shutter LASER open 10:26:50 Received message from Camera: op=State serial=61793 10:26:50 GetSingleValue result=40 Value=cccccccc 10:26:50 SkyScan query 10:26:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:26:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:51 Parameters OK 10:26:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:51 Set A/D data flow result=40 10:26:51 Set A/D channel type result=40 10:26:51 Set A/D encoding result=40 10:26:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:51 Set channel filter=0.000000e+000 result=40 10:26:51 Config A/D Result=40 10:26:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:51 Get A/D filter: -9.255963e+061 result=40 10:26:51 Get A/D value=-858993460 result=40 10:26:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:51 Parameters OK 10:26:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:51 Set A/D data flow result=40 10:26:51 Set A/D channel type result=40 10:26:51 Set A/D encoding result=40 10:26:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:51 Set channel filter=0.000000e+000 result=40 10:26:51 Config A/D Result=40 10:26:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:51 Get A/D filter: -9.255963e+061 result=40 10:26:51 Get A/D value=-858993460 result=40 10:26:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:26:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:26:51 Aux= 10:26:51 Message to Camera, serial 61793 queued 10:26:59 Received message from Master: op=Shutter serial=61803 10:26:59 Shutter LASER close 10:27:00 Received message from Master: op=PointingHead serial=61807 10:27:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:27:00 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:27:00 Point started: ret=0 10:27:00 point_skyscan result=0 10:27:01 Check angles 10:27:01 SkyScan query 10:27:01 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.445<-21563 Statuses=0009 0009 10:27:01 Msec=0 True Az=135.705 Ze=-143.445 Az status=0009 Ze status=0009 10:27:01 Check angles 10:27:01 SkyScan query 10:27:02 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.49<-20166 Statuses=0009 0009 10:27:02 Msec=750 True Az=153.24 Ze=-122.49 Az status=0009 Ze status=0009 10:27:02 Check angles 10:27:02 SkyScan query 10:27:03 SkyScan query done: ret=0 az=170.73<-11382 ze=-101.58<-18772 Statuses=0009 0009 10:27:03 Msec=1500 True Az=170.73 Ze=-101.58 Az status=0009 Ze status=0009 10:27:03 Check angles 10:27:03 SkyScan query 10:27:04 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.565<-17371 Statuses=0008 0009 10:27:04 Msec=2250 True Az=176.025 Ze=-80.565 Az status=0008 Ze status=0009 10:27:04 Check angles 10:27:04 SkyScan query 10:27:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.64<-15976 Statuses=0008 0009 10:27:04 Msec=3000 True Az=175.995 Ze=-59.64 Az status=0008 Ze status=0009 10:27:04 Check angles 10:27:04 SkyScan query 10:27:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:27:05 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:27:05 Message to Master queued w/err=0: serial=61807 error=0 10:27:10 Received message from Master: op=Filter serial=61808 10:27:10 Color wheel filter change from 0 to 0 10:27:10 FLIGetFilterPos err=0 currentPosition=0 10:27:10 FLIGetStepsRemaining err=0 RemainingSteps=0 10:27:10 Filter is already there-color wheel unchanged 10:27:10 Received message from Master: op=Shutter serial=61809 10:27:10 Shutter LASER close 10:27:10 Received message from Camera: op=State serial=61811 10:27:10 GetSingleValue result=40 Value=cccccccc 10:27:10 SkyScan query 10:27:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:27:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:11 Parameters OK 10:27:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:11 Set A/D data flow result=40 10:27:11 Set A/D channel type result=40 10:27:11 Set A/D encoding result=40 10:27:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:11 Set channel filter=0.000000e+000 result=40 10:27:11 Config A/D Result=40 10:27:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:11 Get A/D filter: -9.255963e+061 result=40 10:27:11 Get A/D value=-858993460 result=40 10:27:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:11 Parameters OK 10:27:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:11 Set A/D data flow result=40 10:27:11 Set A/D channel type result=40 10:27:11 Set A/D encoding result=40 10:27:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:11 Set channel filter=0.000000e+000 result=40 10:27:11 Config A/D Result=40 10:27:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:11 Get A/D filter: -9.255963e+061 result=40 10:27:11 Get A/D value=-858993460 result=40 10:27:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:27:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:27:11 Aux= 10:27:11 Message to Camera, serial 61811 queued 10:27:48 Received message from Master: op=PointingHead serial=61824 10:27:48 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:27:48 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:27:48 Point started: ret=0 10:27:48 point_skyscan result=0 10:27:49 Check angles 10:27:49 SkyScan query 10:27:49 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.675<-13445 Statuses=0009 0009 10:27:49 Msec=0 True Az=152.94 Ze=-21.675 Az status=0009 Ze status=0009 10:27:50 Check angles 10:27:50 SkyScan query 10:27:50 SkyScan query done: ret=0 az=135.21<-9014 ze=-0.255<-12017 Statuses=0009 0009 10:27:50 Msec=750 True Az=135.21 Ze=-0.255 Az status=0009 Ze status=0009 10:27:50 Check angles 10:27:50 SkyScan query 10:27:51 SkyScan query done: ret=0 az=117.525<-7835 ze=20.685<-10621 Statuses=0009 0009 10:27:51 Msec=1500 True Az=117.525 Ze=20.685 Az status=0009 Ze status=0009 10:27:51 Check angles 10:27:51 SkyScan query 10:27:52 SkyScan query done: ret=0 az=100.14<-6676 ze=41.655<-9223 Statuses=0009 0009 10:27:52 Msec=2250 True Az=100.14 Ze=41.655 Az status=0009 Ze status=0009 10:27:52 Check angles 10:27:52 SkyScan query 10:27:52 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 10:27:52 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 10:27:53 Check angles 10:27:53 SkyScan query 10:27:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:27:53 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:27:53 Message to Master queued w/err=0: serial=61824 error=0 10:27:58 Received message from Master: op=Filter serial=61825 10:27:58 Color wheel filter change from 0 to 0 10:27:58 FLIGetFilterPos err=0 currentPosition=0 10:27:58 FLIGetStepsRemaining err=0 RemainingSteps=0 10:27:58 Filter is already there-color wheel unchanged 10:27:58 Received message from Master: op=Shutter serial=61826 10:27:58 Shutter LASER close 10:27:58 Received message from Camera: op=State serial=61828 10:27:58 GetSingleValue result=40 Value=cccccccc 10:27:58 SkyScan query 10:27:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:27:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:59 Parameters OK 10:27:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:59 Set A/D data flow result=40 10:27:59 Set A/D channel type result=40 10:27:59 Set A/D encoding result=40 10:27:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:59 Set channel filter=0.000000e+000 result=40 10:27:59 Config A/D Result=40 10:27:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:59 Get A/D filter: -9.255963e+061 result=40 10:27:59 Get A/D value=-858993460 result=40 10:27:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:59 Parameters OK 10:27:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:59 Set A/D data flow result=40 10:27:59 Set A/D channel type result=40 10:27:59 Set A/D encoding result=40 10:27:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:59 Set channel filter=0.000000e+000 result=40 10:27:59 Config A/D Result=40 10:27:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:59 Get A/D filter: -9.255963e+061 result=40 10:27:59 Get A/D value=-858993460 result=40 10:27:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:27:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:27:59 Aux= 10:27:59 Message to Camera, serial 61828 queued 10:28:36 Received message from Master: op=PointingHead serial=61841 10:28:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:28:36 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:28:36 Point started: ret=0 10:28:36 point_skyscan result=0 10:28:37 Check angles 10:28:37 SkyScan query 10:28:38 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 10:28:38 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 10:28:38 Check angles 10:28:38 SkyScan query 10:28:38 SkyScan query done: ret=0 az=126.495<-8433 ze=38.505<-9433 Statuses=0009 0008 10:28:38 Msec=750 True Az=126.495 Ze=38.505 Az status=0009 Ze status=0008 10:28:39 Check angles 10:28:39 SkyScan query 10:28:39 SkyScan query done: ret=0 az=143.895<-9593 ze=38.505<-9433 Statuses=0009 0008 10:28:39 Msec=1500 True Az=143.895 Ze=38.505 Az status=0009 Ze status=0008 10:28:39 Check angles 10:28:39 SkyScan query 10:28:40 SkyScan query done: ret=0 az=161.235<-10749 ze=38.505<-9433 Statuses=0009 0008 10:28:40 Msec=2250 True Az=161.235 Ze=38.505 Az status=0009 Ze status=0008 10:28:40 Check angles 10:28:40 SkyScan query 10:28:41 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 10:28:41 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 10:28:41 Check angles 10:28:41 SkyScan query 10:28:41 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:28:41 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:28:41 Message to Master queued w/err=0: serial=61841 error=0 10:28:46 Received message from Master: op=Filter serial=61842 10:28:46 Color wheel filter change from 0 to 0 10:28:46 FLIGetFilterPos err=0 currentPosition=0 10:28:46 FLIGetStepsRemaining err=0 RemainingSteps=0 10:28:46 Filter is already there-color wheel unchanged 10:28:46 Received message from Master: op=Shutter serial=61843 10:28:47 Shutter LASER close 10:28:47 Received message from Camera: op=State serial=61845 10:28:47 GetSingleValue result=40 Value=cccccccc 10:28:47 SkyScan query 10:28:47 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:28:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:47 Parameters OK 10:28:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:47 Set A/D data flow result=40 10:28:47 Set A/D channel type result=40 10:28:47 Set A/D encoding result=40 10:28:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:47 Set channel filter=0.000000e+000 result=40 10:28:47 Config A/D Result=40 10:28:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:47 Get A/D filter: -9.255963e+061 result=40 10:28:47 Get A/D value=-858993460 result=40 10:28:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:47 Parameters OK 10:28:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:47 Set A/D data flow result=40 10:28:47 Set A/D channel type result=40 10:28:47 Set A/D encoding result=40 10:28:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:47 Set channel filter=0.000000e+000 result=40 10:28:47 Config A/D Result=40 10:28:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:47 Get A/D filter: -9.255963e+061 result=40 10:28:47 Get A/D value=-858993460 result=40 10:28:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:28:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:28:47 Aux= 10:28:47 Message to Camera, serial 61845 queued 10:29:24 Received message from Master: op=PointingHead serial=61858 10:29:24 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:29:24 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:29:24 Point started: ret=0 10:29:24 point_skyscan result=0 10:29:25 Check angles 10:29:25 SkyScan query 10:29:26 SkyScan query done: ret=0 az=152.91<-10194 ze=8.46<-11436 Statuses=0009 0009 10:29:26 Msec=0 True Az=152.91 Ze=8.46 Az status=0009 Ze status=0009 10:29:26 Check angles 10:29:26 SkyScan query 10:29:26 SkyScan query done: ret=0 az=135.66<-9044 ze=-12.09<-12806 Statuses=0009 0009 10:29:26 Msec=750 True Az=135.66 Ze=-12.09 Az status=0009 Ze status=0009 10:29:27 Check angles 10:29:27 SkyScan query 10:29:27 SkyScan query done: ret=0 az=118.095<-7873 ze=-33<-14200 Statuses=0009 0009 10:29:27 Msec=1500 True Az=118.095 Ze=-33 Az status=0009 Ze status=0009 10:29:27 Check angles 10:29:27 SkyScan query 10:29:28 SkyScan query done: ret=0 az=100.56<-6704 ze=-51.51<-15434 Statuses=0009 0009 10:29:28 Msec=2250 True Az=100.56 Ze=-51.51 Az status=0009 Ze status=0009 10:29:28 Check angles 10:29:28 SkyScan query 10:29:29 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 10:29:29 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 10:29:29 Check angles 10:29:29 SkyScan query 10:29:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:29:29 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:29:29 Message to Master queued w/err=0: serial=61858 error=0 10:29:34 Received message from Master: op=Filter serial=61859 10:29:34 Color wheel filter change from 0 to 0 10:29:34 FLIGetFilterPos err=0 currentPosition=0 10:29:34 FLIGetStepsRemaining err=0 RemainingSteps=0 10:29:34 Filter is already there-color wheel unchanged 10:29:35 Received message from Master: op=Shutter serial=61860 10:29:35 Shutter LASER close 10:29:35 Received message from Camera: op=State serial=61862 10:29:35 GetSingleValue result=40 Value=cccccccc 10:29:35 SkyScan query 10:29:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:29:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:35 Parameters OK 10:29:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:35 Set A/D data flow result=40 10:29:35 Set A/D channel type result=40 10:29:35 Set A/D encoding result=40 10:29:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:35 Set channel filter=0.000000e+000 result=40 10:29:35 Config A/D Result=40 10:29:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:35 Get A/D filter: -9.255963e+061 result=40 10:29:35 Get A/D value=-858993460 result=40 10:29:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:35 Parameters OK 10:29:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:35 Set A/D data flow result=40 10:29:35 Set A/D channel type result=40 10:29:35 Set A/D encoding result=40 10:29:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:35 Set channel filter=0.000000e+000 result=40 10:29:35 Config A/D Result=40 10:29:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:35 Get A/D filter: -9.255963e+061 result=40 10:29:35 Get A/D value=-858993460 result=40 10:29:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:29:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:29:35 Aux= 10:29:35 Message to Camera, serial 61862 queued 10:30:12 Received message from Master: op=PointingHead serial=61875 10:30:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:30:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:30:12 Point started: ret=0 10:30:12 point_skyscan result=0 10:30:13 Check angles 10:30:13 SkyScan query 10:30:14 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.555<-17437 Statuses=0009 0009 10:30:14 Msec=0 True Az=109.38 Ze=-81.555 Az status=0009 Ze status=0009 10:30:14 Check angles 10:30:14 SkyScan query 10:30:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 10:30:14 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 10:30:15 Check angles 10:30:15 SkyScan query 10:30:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.9<-20260 Statuses=0008 0009 10:30:15 Msec=1500 True Az=112.995 Ze=-123.9 Az status=0008 Ze status=0009 10:30:15 Check angles 10:30:15 SkyScan query 10:30:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.275<-21685 Statuses=0008 0009 10:30:16 Msec=2250 True Az=112.995 Ze=-145.275 Az status=0008 Ze status=0009 10:30:16 Check angles 10:30:16 SkyScan query 10:30:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.68<-23112 Statuses=0008 0009 10:30:17 Msec=3000 True Az=112.995 Ze=-166.68 Az status=0008 Ze status=0009 10:30:17 Check angles 10:30:17 SkyScan query 10:30:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:30:18 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:30:18 Message to Master queued w/err=0: serial=61875 error=0 10:30:23 Received message from Master: op=Filter serial=61876 10:30:23 Color wheel filter change from 0 to 0 10:30:23 FLIGetFilterPos err=0 currentPosition=0 10:30:23 FLIGetStepsRemaining err=0 RemainingSteps=0 10:30:23 Filter is already there-color wheel unchanged 10:30:23 Received message from Master: op=Shutter serial=61877 10:30:23 Shutter LASER open 10:30:23 Received message from Camera: op=State serial=61879 10:30:23 GetSingleValue result=40 Value=cccccccc 10:30:23 SkyScan query 10:30:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:30:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:23 Parameters OK 10:30:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:23 Set A/D data flow result=40 10:30:23 Set A/D channel type result=40 10:30:23 Set A/D encoding result=40 10:30:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:23 Set channel filter=0.000000e+000 result=40 10:30:23 Config A/D Result=40 10:30:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:23 Get A/D filter: -9.255963e+061 result=40 10:30:23 Get A/D value=-858993460 result=40 10:30:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:23 Parameters OK 10:30:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:23 Set A/D data flow result=40 10:30:23 Set A/D channel type result=40 10:30:23 Set A/D encoding result=40 10:30:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:23 Set channel filter=0.000000e+000 result=40 10:30:23 Config A/D Result=40 10:30:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:23 Get A/D filter: -9.255963e+061 result=40 10:30:23 Get A/D value=-858993460 result=40 10:30:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:30:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:30:23 Aux= 10:30:23 Message to Camera, serial 61879 queued 10:30:32 Received message from Master: op=Shutter serial=61889 10:30:32 Shutter LASER close 10:30:32 Received message from Master: op=PointingHead serial=61893 10:30:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:30:32 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:30:33 Point started: ret=0 10:30:33 point_skyscan result=0 10:30:33 Check angles 10:30:33 SkyScan query 10:30:34 SkyScan query done: ret=0 az=89.895<-5993 ze=157.275<-1515 Statuses=0009 0009 10:30:34 Msec=0 True Az=89.895 Ze=157.275 Az status=0009 Ze status=0009 10:30:34 Check angles 10:30:34 SkyScan query 10:30:35 SkyScan query done: ret=0 az=72.495<-4833 ze=136.29<-2914 Statuses=0009 0009 10:30:35 Msec=750 True Az=72.495 Ze=136.29 Az status=0009 Ze status=0009 10:30:35 Check angles 10:30:35 SkyScan query 10:30:36 SkyScan query done: ret=0 az=54.795<-3653 ze=114.915<-4339 Statuses=0009 0009 10:30:36 Msec=1500 True Az=54.795 Ze=114.915 Az status=0009 Ze status=0009 10:30:36 Check angles 10:30:36 SkyScan query 10:30:36 SkyScan query done: ret=0 az=40.89<-2726 ze=93.96<-5736 Statuses=0009 0009 10:30:36 Msec=2250 True Az=40.89 Ze=93.96 Az status=0009 Ze status=0009 10:30:36 Check angles 10:30:36 SkyScan query 10:30:37 SkyScan query done: ret=0 az=40.995<-2733 ze=72.975<-7135 Statuses=0008 0009 10:30:37 Msec=3000 True Az=40.995 Ze=72.975 Az status=0008 Ze status=0009 10:30:37 Check angles 10:30:37 SkyScan query 10:30:38 SkyScan query done: ret=0 az=40.995<-2733 ze=52.56<-8496 Statuses=0008 0009 10:30:38 Msec=3750 True Az=40.995 Ze=52.56 Az status=0008 Ze status=0009 10:30:38 Check angles 10:30:38 SkyScan query 10:30:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:30:39 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:30:39 Message to Master queued w/err=0: serial=61893 error=0 10:30:44 Received message from Master: op=Filter serial=61894 10:30:44 Color wheel filter change from 0 to 0 10:30:44 FLIGetFilterPos err=0 currentPosition=0 10:30:44 FLIGetStepsRemaining err=0 RemainingSteps=0 10:30:44 Filter is already there-color wheel unchanged 10:30:44 Received message from Master: op=Shutter serial=61895 10:30:44 Shutter LASER close 10:30:44 Received message from Camera: op=State serial=61897 10:30:44 GetSingleValue result=40 Value=cccccccc 10:30:44 SkyScan query 10:30:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:30:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:44 Parameters OK 10:30:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:44 Set A/D data flow result=40 10:30:44 Set A/D channel type result=40 10:30:44 Set A/D encoding result=40 10:30:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:44 Set channel filter=0.000000e+000 result=40 10:30:44 Config A/D Result=40 10:30:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:44 Get A/D filter: -9.255963e+061 result=40 10:30:44 Get A/D value=-858993460 result=40 10:30:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:44 Parameters OK 10:30:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:44 Set A/D data flow result=40 10:30:44 Set A/D channel type result=40 10:30:44 Set A/D encoding result=40 10:30:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:44 Set channel filter=0.000000e+000 result=40 10:30:44 Config A/D Result=40 10:30:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:44 Get A/D filter: -9.255963e+061 result=40 10:30:44 Get A/D value=-858993460 result=40 10:30:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:30:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:30:44 Aux= 10:30:44 Message to Camera, serial 61897 queued 10:31:21 Received message from Master: op=PointingHead serial=61910 10:31:21 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:31:21 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:31:22 Point started: ret=0 10:31:22 point_skyscan result=0 10:31:22 Check angles 10:31:22 SkyScan query 10:31:23 SkyScan query done: ret=0 az=64.23<-4282 ze=66.555<-7563 Statuses=0009 0008 10:31:23 Msec=0 True Az=64.23 Ze=66.555 Az status=0009 Ze status=0008 10:31:23 Check angles 10:31:23 SkyScan query 10:31:24 SkyScan query done: ret=0 az=82.05<-5470 ze=66.495<-7567 Statuses=0009 0008 10:31:24 Msec=750 True Az=82.05 Ze=66.495 Az status=0009 Ze status=0008 10:31:24 Check angles 10:31:24 SkyScan query 10:31:24 SkyScan query done: ret=0 az=99.705<-6647 ze=66.495<-7567 Statuses=0009 0008 10:31:24 Msec=1500 True Az=99.705 Ze=66.495 Az status=0009 Ze status=0008 10:31:25 Check angles 10:31:25 SkyScan query 10:31:25 SkyScan query done: ret=0 az=117.405<-7827 ze=66.495<-7567 Statuses=0009 0008 10:31:25 Msec=2250 True Az=117.405 Ze=66.495 Az status=0009 Ze status=0008 10:31:25 Check angles 10:31:25 SkyScan query 10:31:26 SkyScan query done: ret=0 az=135.105<-9007 ze=66.495<-7567 Statuses=0009 0008 10:31:26 Msec=3000 True Az=135.105 Ze=66.495 Az status=0009 Ze status=0008 10:31:26 Check angles 10:31:26 SkyScan query 10:31:27 SkyScan query done: ret=0 az=152.94<-10196 ze=66.495<-7567 Statuses=0009 0008 10:31:27 Msec=3750 True Az=152.94 Ze=66.495 Az status=0009 Ze status=0008 10:31:27 Check angles 10:31:27 SkyScan query 10:31:28 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 10:31:28 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 10:31:28 Message to Master queued w/err=0: serial=61910 error=0 10:31:33 Received message from Master: op=Filter serial=61911 10:31:33 Color wheel filter change from 0 to 0 10:31:33 FLIGetFilterPos err=0 currentPosition=0 10:31:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:31:33 Filter is already there-color wheel unchanged 10:31:33 Received message from Master: op=Shutter serial=61912 10:31:33 Shutter LASER close 10:31:33 Received message from Camera: op=State serial=61914 10:31:33 GetSingleValue result=40 Value=cccccccc 10:31:33 SkyScan query 10:31:33 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:31:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:33 Parameters OK 10:31:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:33 Set A/D data flow result=40 10:31:33 Set A/D channel type result=40 10:31:33 Set A/D encoding result=40 10:31:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:33 Set channel filter=0.000000e+000 result=40 10:31:33 Config A/D Result=40 10:31:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:33 Get A/D filter: -9.255963e+061 result=40 10:31:33 Get A/D value=-858993460 result=40 10:31:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:33 Parameters OK 10:31:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:33 Set A/D data flow result=40 10:31:33 Set A/D channel type result=40 10:31:33 Set A/D encoding result=40 10:31:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:33 Set channel filter=0.000000e+000 result=40 10:31:33 Config A/D Result=40 10:31:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:33 Get A/D filter: -9.255963e+061 result=40 10:31:33 Get A/D value=-858993460 result=40 10:31:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:33 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:31:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:31:33 Aux= 10:31:33 Message to Camera, serial 61914 queued 10:32:10 Received message from Master: op=PointingHead serial=61927 10:32:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:32:10 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:32:10 Point started: ret=0 10:32:10 point_skyscan result=0 10:32:11 Check angles 10:32:11 SkyScan query 10:32:12 SkyScan query done: ret=0 az=135.18<-9012 ze=36.915<-9539 Statuses=0009 0009 10:32:12 Msec=0 True Az=135.18 Ze=36.915 Az status=0009 Ze status=0009 10:32:12 Check angles 10:32:12 SkyScan query 10:32:13 SkyScan query done: ret=0 az=117.705<-7847 ze=15.96<-10936 Statuses=0009 0009 10:32:13 Msec=750 True Az=117.705 Ze=15.96 Az status=0009 Ze status=0009 10:32:13 Check angles 10:32:13 SkyScan query 10:32:13 SkyScan query done: ret=0 az=100.35<-6690 ze=-4.995<-12333 Statuses=0009 0009 10:32:13 Msec=1500 True Az=100.35 Ze=-4.995 Az status=0009 Ze status=0009 10:32:13 Check angles 10:32:13 SkyScan query 10:32:14 SkyScan query done: ret=0 az=82.8<-5520 ze=-25.935<-13729 Statuses=0009 0009 10:32:14 Msec=2250 True Az=82.8 Ze=-25.935 Az status=0009 Ze status=0009 10:32:14 Check angles 10:32:14 SkyScan query 10:32:15 SkyScan query done: ret=0 az=65.28<-4352 ze=-38.58<-14572 Statuses=0009 0008 10:32:15 Msec=3000 True Az=65.28 Ze=-38.58 Az status=0009 Ze status=0008 10:32:15 Check angles 10:32:15 SkyScan query 10:32:16 SkyScan query done: ret=0 az=47.835<-3189 ze=-38.52<-14568 Statuses=0009 0008 10:32:16 Msec=3750 True Az=47.835 Ze=-38.52 Az status=0009 Ze status=0008 10:32:16 Check angles 10:32:16 SkyScan query 10:32:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:32:16 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:32:16 Message to Master queued w/err=0: serial=61927 error=0 10:32:21 Received message from Master: op=Filter serial=61928 10:32:21 Color wheel filter change from 0 to 0 10:32:21 FLIGetFilterPos err=0 currentPosition=0 10:32:21 FLIGetStepsRemaining err=0 RemainingSteps=0 10:32:21 Filter is already there-color wheel unchanged 10:32:21 Received message from Master: op=Shutter serial=61929 10:32:21 Shutter LASER close 10:32:22 Received message from Camera: op=State serial=61931 10:32:22 GetSingleValue result=40 Value=cccccccc 10:32:22 SkyScan query 10:32:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:32:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:22 Parameters OK 10:32:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:22 Set A/D data flow result=40 10:32:22 Set A/D channel type result=40 10:32:22 Set A/D encoding result=40 10:32:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:22 Set channel filter=0.000000e+000 result=40 10:32:22 Config A/D Result=40 10:32:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:22 Get A/D filter: -9.255963e+061 result=40 10:32:22 Get A/D value=-858993460 result=40 10:32:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:22 Parameters OK 10:32:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:22 Set A/D data flow result=40 10:32:22 Set A/D channel type result=40 10:32:22 Set A/D encoding result=40 10:32:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:22 Set channel filter=0.000000e+000 result=40 10:32:22 Config A/D Result=40 10:32:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:22 Get A/D filter: -9.255963e+061 result=40 10:32:22 Get A/D value=-858993460 result=40 10:32:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:32:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:32:22 Aux= 10:32:22 Message to Camera, serial 61931 queued 10:32:59 Received message from Master: op=PointingHead serial=61944 10:32:59 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:32:59 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:32:59 Point started: ret=0 10:32:59 point_skyscan result=0 10:33:00 Check angles 10:33:00 SkyScan query 10:33:01 SkyScan query done: ret=0 az=64.455<-4297 ze=-68.805<-16587 Statuses=0009 0009 10:33:01 Msec=0 True Az=64.455 Ze=-68.805 Az status=0009 Ze status=0009 10:33:01 Check angles 10:33:01 SkyScan query 10:33:01 SkyScan query done: ret=0 az=82.305<-5487 ze=-90.18<-18012 Statuses=0009 0009 10:33:01 Msec=750 True Az=82.305 Ze=-90.18 Az status=0009 Ze status=0009 10:33:02 Check angles 10:33:02 SkyScan query 10:33:02 SkyScan query done: ret=0 az=99.855<-6657 ze=-111.135<-19409 Statuses=0009 0009 10:33:02 Msec=1500 True Az=99.855 Ze=-111.135 Az status=0009 Ze status=0009 10:33:02 Check angles 10:33:02 SkyScan query 10:33:03 SkyScan query done: ret=0 az=117.3<-7820 ze=-132.045<-20803 Statuses=0009 0009 10:33:03 Msec=2250 True Az=117.3 Ze=-132.045 Az status=0009 Ze status=0009 10:33:03 Check angles 10:33:03 SkyScan query 10:33:04 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 10:33:04 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 10:33:04 Check angles 10:33:04 SkyScan query 10:33:04 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:33:04 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:33:04 Message to Master queued w/err=0: serial=61944 error=0 10:33:09 Received message from Master: op=Filter serial=61945 10:33:09 Color wheel filter change from 0 to 0 10:33:09 FLIGetFilterPos err=0 currentPosition=0 10:33:09 FLIGetStepsRemaining err=0 RemainingSteps=0 10:33:09 Filter is already there-color wheel unchanged 10:33:10 Received message from Master: op=Shutter serial=61946 10:33:10 Shutter LASER close 10:33:10 Received message from Camera: op=State serial=61948 10:33:10 GetSingleValue result=40 Value=cccccccc 10:33:10 SkyScan query 10:33:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:33:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:10 Parameters OK 10:33:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:10 Set A/D data flow result=40 10:33:10 Set A/D channel type result=40 10:33:10 Set A/D encoding result=40 10:33:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:10 Set channel filter=0.000000e+000 result=40 10:33:10 Config A/D Result=40 10:33:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:10 Get A/D filter: -9.255963e+061 result=40 10:33:10 Get A/D value=-858993460 result=40 10:33:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:10 Parameters OK 10:33:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:10 Set A/D data flow result=40 10:33:10 Set A/D channel type result=40 10:33:10 Set A/D encoding result=40 10:33:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:10 Set channel filter=0.000000e+000 result=40 10:33:10 Config A/D Result=40 10:33:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:10 Get A/D filter: -9.255963e+061 result=40 10:33:10 Get A/D value=-858993460 result=40 10:33:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:10 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:33:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:33:10 Aux= 10:33:10 Message to Camera, serial 61948 queued 10:33:46 Received message from Master: op=PointingHead serial=61960 10:33:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:33:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:33:46 Point started: ret=0 10:33:46 point_skyscan result=0 10:33:47 Check angles 10:33:47 SkyScan query 10:33:48 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.3<-23420 Statuses=0009 0009 10:33:48 Msec=0 True Az=113.01 Ze=-171.3 Az status=0009 Ze status=0009 10:33:48 Check angles 10:33:48 SkyScan query 10:33:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:33:49 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:33:49 Message to Master queued w/err=0: serial=61960 error=0 10:33:54 Received message from Master: op=Filter serial=61961 10:33:54 Color wheel filter change from 0 to 0 10:33:54 FLIGetFilterPos err=0 currentPosition=0 10:33:54 FLIGetStepsRemaining err=0 RemainingSteps=0 10:33:54 Filter is already there-color wheel unchanged 10:33:54 Received message from Master: op=Shutter serial=61962 10:33:54 Shutter LASER open 10:33:54 Received message from Camera: op=State serial=61964 10:33:54 GetSingleValue result=40 Value=cccccccc 10:33:54 SkyScan query 10:33:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:33:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:54 Parameters OK 10:33:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:54 Set A/D data flow result=40 10:33:54 Set A/D channel type result=40 10:33:54 Set A/D encoding result=40 10:33:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:54 Set channel filter=0.000000e+000 result=40 10:33:54 Config A/D Result=40 10:33:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:54 Get A/D filter: -9.255963e+061 result=40 10:33:54 Get A/D value=-858993460 result=40 10:33:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:54 Parameters OK 10:33:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:54 Set A/D data flow result=40 10:33:54 Set A/D channel type result=40 10:33:54 Set A/D encoding result=40 10:33:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:54 Set channel filter=0.000000e+000 result=40 10:33:54 Config A/D Result=40 10:33:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:54 Get A/D filter: -9.255963e+061 result=40 10:33:54 Get A/D value=-858993460 result=40 10:33:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:33:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:33:54 Aux= 10:33:54 Message to Camera, serial 61964 queued 10:34:03 Received message from Master: op=Shutter serial=61974 10:34:03 Shutter LASER close 10:34:03 Received message from Master: op=PointingHead serial=61978 10:34:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:34:03 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:34:04 Point started: ret=0 10:34:04 point_skyscan result=0 10:34:05 Check angles 10:34:05 SkyScan query 10:34:05 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.295<-21553 Statuses=0009 0009 10:34:05 Msec=0 True Az=135.975 Ze=-143.295 Az status=0009 Ze status=0009 10:34:05 Check angles 10:34:05 SkyScan query 10:34:06 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.34<-20156 Statuses=0009 0009 10:34:06 Msec=750 True Az=153.435 Ze=-122.34 Az status=0009 Ze status=0009 10:34:06 Check angles 10:34:06 SkyScan query 10:34:07 SkyScan query done: ret=0 az=170.97<-11398 ze=-101.46<-18764 Statuses=0009 0009 10:34:07 Msec=1500 True Az=170.97 Ze=-101.46 Az status=0009 Ze status=0009 10:34:07 Check angles 10:34:07 SkyScan query 10:34:07 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.43<-17362 Statuses=0008 0009 10:34:07 Msec=2250 True Az=176.025 Ze=-80.43 Az status=0008 Ze status=0009 10:34:08 Check angles 10:34:08 SkyScan query 10:34:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.46<-15964 Statuses=0008 0009 10:34:08 Msec=3000 True Az=175.995 Ze=-59.46 Az status=0008 Ze status=0009 10:34:08 Check angles 10:34:08 SkyScan query 10:34:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:34:09 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:34:09 Message to Master queued w/err=0: serial=61978 error=0 10:34:14 Received message from Master: op=Filter serial=61979 10:34:14 Color wheel filter change from 0 to 0 10:34:14 FLIGetFilterPos err=0 currentPosition=0 10:34:14 FLIGetStepsRemaining err=0 RemainingSteps=0 10:34:14 Filter is already there-color wheel unchanged 10:34:14 Received message from Master: op=Shutter serial=61980 10:34:14 Shutter LASER close 10:34:14 Received message from Camera: op=State serial=61982 10:34:14 GetSingleValue result=40 Value=cccccccc 10:34:14 SkyScan query 10:34:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:34:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:15 Parameters OK 10:34:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:15 Set A/D data flow result=40 10:34:15 Set A/D channel type result=40 10:34:15 Set A/D encoding result=40 10:34:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:15 Set channel filter=0.000000e+000 result=40 10:34:15 Config A/D Result=40 10:34:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:15 Get A/D filter: -9.255963e+061 result=40 10:34:15 Get A/D value=-858993460 result=40 10:34:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:15 Parameters OK 10:34:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:15 Set A/D data flow result=40 10:34:15 Set A/D channel type result=40 10:34:15 Set A/D encoding result=40 10:34:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:15 Set channel filter=0.000000e+000 result=40 10:34:15 Config A/D Result=40 10:34:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:15 Get A/D filter: -9.255963e+061 result=40 10:34:15 Get A/D value=-858993460 result=40 10:34:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:34:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:34:15 Aux= 10:34:15 Message to Camera, serial 61982 queued 10:34:52 Received message from Master: op=PointingHead serial=61995 10:34:52 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:34:52 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:34:52 Point started: ret=0 10:34:52 point_skyscan result=0 10:34:53 Check angles 10:34:53 SkyScan query 10:34:53 SkyScan query done: ret=0 az=152.625<-10175 ze=-21.24<-13416 Statuses=0009 0009 10:34:53 Msec=0 True Az=152.625 Ze=-21.24 Az status=0009 Ze status=0009 10:34:54 Check angles 10:34:54 SkyScan query 10:34:54 SkyScan query done: ret=0 az=135.225<-9015 ze=-0.27<-12018 Statuses=0009 0009 10:34:54 Msec=750 True Az=135.225 Ze=-0.27 Az status=0009 Ze status=0009 10:34:54 Check angles 10:34:54 SkyScan query 10:34:55 SkyScan query done: ret=0 az=117.525<-7835 ze=20.67<-10622 Statuses=0009 0009 10:34:55 Msec=1500 True Az=117.525 Ze=20.67 Az status=0009 Ze status=0009 10:34:55 Check angles 10:34:55 SkyScan query 10:34:56 SkyScan query done: ret=0 az=99.87<-6658 ze=42.075<-9195 Statuses=0009 0009 10:34:56 Msec=2250 True Az=99.87 Ze=42.075 Az status=0009 Ze status=0009 10:34:56 Check angles 10:34:56 SkyScan query 10:34:56 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 10:34:56 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 10:34:57 Check angles 10:34:57 SkyScan query 10:34:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:34:57 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:34:57 Message to Master queued w/err=0: serial=61995 error=0 10:35:02 Received message from Master: op=Filter serial=61996 10:35:02 Color wheel filter change from 0 to 0 10:35:02 FLIGetFilterPos err=0 currentPosition=0 10:35:02 FLIGetStepsRemaining err=0 RemainingSteps=0 10:35:02 Filter is already there-color wheel unchanged 10:35:02 Received message from Master: op=Shutter serial=61997 10:35:02 Shutter LASER close 10:35:02 Received message from Camera: op=State serial=61999 10:35:02 GetSingleValue result=40 Value=cccccccc 10:35:02 SkyScan query 10:35:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:35:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:03 Parameters OK 10:35:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:03 Set A/D data flow result=40 10:35:03 Set A/D channel type result=40 10:35:03 Set A/D encoding result=40 10:35:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:03 Set channel filter=0.000000e+000 result=40 10:35:03 Config A/D Result=40 10:35:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:03 Get A/D filter: -9.255963e+061 result=40 10:35:03 Get A/D value=-858993460 result=40 10:35:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:03 Parameters OK 10:35:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:03 Set A/D data flow result=40 10:35:03 Set A/D channel type result=40 10:35:03 Set A/D encoding result=40 10:35:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:03 Set channel filter=0.000000e+000 result=40 10:35:03 Config A/D Result=40 10:35:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:03 Get A/D filter: -9.255963e+061 result=40 10:35:03 Get A/D value=-858993460 result=40 10:35:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:35:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:35:03 Aux= 10:35:03 Message to Camera, serial 61999 queued 10:35:40 Received message from Master: op=PointingHead serial=62012 10:35:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:35:40 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:35:40 Point started: ret=0 10:35:40 point_skyscan result=0 10:35:41 Check angles 10:35:41 SkyScan query 10:35:41 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 10:35:41 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 10:35:42 Check angles [UTC 2018-12-11 10:35:42] 10:35:42 SkyScan query 10:35:42 SkyScan query done: ret=0 az=128.025<-8535 ze=38.505<-9433 Statuses=0009 0008 10:35:42 Msec=750 True Az=128.025 Ze=38.505 Az status=0009 Ze status=0008 10:35:42 Check angles 10:35:42 SkyScan query 10:35:43 SkyScan query done: ret=0 az=144.075<-9605 ze=38.505<-9433 Statuses=0009 0008 10:35:43 Msec=1500 True Az=144.075 Ze=38.505 Az status=0009 Ze status=0008 10:35:43 Check angles 10:35:43 SkyScan query 10:35:44 SkyScan query done: ret=0 az=161.475<-10765 ze=38.505<-9433 Statuses=0009 0008 10:35:44 Msec=2250 True Az=161.475 Ze=38.505 Az status=0009 Ze status=0008 10:35:44 Check angles 10:35:44 SkyScan query 10:35:44 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 10:35:44 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 10:35:45 Check angles 10:35:45 SkyScan query 10:35:45 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:35:45 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:35:45 Message to Master queued w/err=0: serial=62012 error=0 10:35:50 Received message from Master: op=Filter serial=62013 10:35:50 Color wheel filter change from 0 to 0 10:35:50 FLIGetFilterPos err=0 currentPosition=0 10:35:50 FLIGetStepsRemaining err=0 RemainingSteps=0 10:35:50 Filter is already there-color wheel unchanged 10:35:50 Received message from Master: op=Shutter serial=62014 10:35:50 Shutter LASER close 10:35:50 Received message from Camera: op=State serial=62016 10:35:50 GetSingleValue result=40 Value=cccccccc 10:35:50 SkyScan query 10:35:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:35:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:51 Parameters OK 10:35:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:51 Set A/D data flow result=40 10:35:51 Set A/D channel type result=40 10:35:51 Set A/D encoding result=40 10:35:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:51 Set channel filter=0.000000e+000 result=40 10:35:51 Config A/D Result=40 10:35:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:51 Get A/D filter: -9.255963e+061 result=40 10:35:51 Get A/D value=-858993460 result=40 10:35:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:51 Parameters OK 10:35:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:51 Set A/D data flow result=40 10:35:51 Set A/D channel type result=40 10:35:51 Set A/D encoding result=40 10:35:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:51 Set channel filter=0.000000e+000 result=40 10:35:51 Config A/D Result=40 10:35:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:51 Get A/D filter: -9.255963e+061 result=40 10:35:51 Get A/D value=-858993460 result=40 10:35:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:35:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:35:51 Aux= 10:35:51 Message to Camera, serial 62016 queued [UTC 2018-12-11 10:35:54] 10:36:28 Received message from Master: op=PointingHead serial=62029 10:36:28 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:36:28 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:36:28 Point started: ret=0 10:36:28 point_skyscan result=0 10:36:29 Check angles 10:36:29 SkyScan query 10:36:29 SkyScan query done: ret=0 az=152.985<-10199 ze=8.655<-11423 Statuses=0009 0009 10:36:29 Msec=0 True Az=152.985 Ze=8.655 Az status=0009 Ze status=0009 10:36:30 Check angles 10:36:30 SkyScan query 10:36:30 SkyScan query done: ret=0 az=135.51<-9034 ze=-12.3<-12820 Statuses=0009 0009 10:36:30 Msec=750 True Az=135.51 Ze=-12.3 Az status=0009 Ze status=0009 10:36:30 Check angles 10:36:30 SkyScan query 10:36:31 SkyScan query done: ret=0 az=118.005<-7867 ze=-33.225<-14215 Statuses=0009 0009 10:36:31 Msec=1500 True Az=118.005 Ze=-33.225 Az status=0009 Ze status=0009 10:36:31 Check angles 10:36:31 SkyScan query 10:36:32 SkyScan query done: ret=0 az=100.185<-6679 ze=-51.57<-15438 Statuses=0009 0009 10:36:32 Msec=2250 True Az=100.185 Ze=-51.57 Az status=0009 Ze status=0009 10:36:32 Check angles 10:36:32 SkyScan query 10:36:32 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.525<-15435 Statuses=0009 0008 10:36:32 Msec=3000 True Az=86.055 Ze=-51.525 Az status=0009 Ze status=0008 10:36:33 Check angles 10:36:33 SkyScan query 10:36:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:36:33 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:36:33 Message to Master queued w/err=0: serial=62029 error=0 10:36:38 Received message from Master: op=Filter serial=62030 10:36:38 Color wheel filter change from 0 to 0 10:36:38 FLIGetFilterPos err=0 currentPosition=0 10:36:38 FLIGetStepsRemaining err=0 RemainingSteps=0 10:36:38 Filter is already there-color wheel unchanged 10:36:38 Received message from Master: op=Shutter serial=62031 10:36:38 Shutter LASER close 10:36:38 Received message from Camera: op=State serial=62033 10:36:38 GetSingleValue result=40 Value=cccccccc 10:36:38 SkyScan query 10:36:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:36:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:39 Parameters OK 10:36:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:39 Set A/D data flow result=40 10:36:39 Set A/D channel type result=40 10:36:39 Set A/D encoding result=40 10:36:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:39 Set channel filter=0.000000e+000 result=40 10:36:39 Config A/D Result=40 10:36:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:39 Get A/D filter: -9.255963e+061 result=40 10:36:39 Get A/D value=-858993460 result=40 10:36:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:39 Parameters OK 10:36:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:39 Set A/D data flow result=40 10:36:39 Set A/D channel type result=40 10:36:39 Set A/D encoding result=40 10:36:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:39 Set channel filter=0.000000e+000 result=40 10:36:39 Config A/D Result=40 10:36:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:39 Get A/D filter: -9.255963e+061 result=40 10:36:39 Get A/D value=-858993460 result=40 10:36:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:36:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:36:39 Aux= 10:36:39 Message to Camera, serial 62033 queued 10:37:16 Received message from Master: op=PointingHead serial=62046 10:37:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:37:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:37:16 Point started: ret=0 10:37:16 point_skyscan result=0 10:37:17 Check angles 10:37:17 SkyScan query 10:37:18 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.33<-17422 Statuses=0009 0009 10:37:18 Msec=0 True Az=109.2 Ze=-81.33 Az status=0009 Ze status=0009 10:37:18 Check angles 10:37:18 SkyScan query 10:37:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.285<-18819 Statuses=0008 0009 10:37:18 Msec=750 True Az=112.995 Ze=-102.285 Az status=0008 Ze status=0009 10:37:18 Check angles 10:37:18 SkyScan query 10:37:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.24<-20216 Statuses=0008 0009 10:37:19 Msec=1500 True Az=112.995 Ze=-123.24 Az status=0008 Ze status=0009 10:37:19 Check angles 10:37:19 SkyScan query 10:37:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.63<-21642 Statuses=0008 0009 10:37:20 Msec=2250 True Az=112.995 Ze=-144.63 Az status=0008 Ze status=0009 10:37:20 Check angles 10:37:20 SkyScan query 10:37:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.005<-23067 Statuses=0008 0009 10:37:21 Msec=3000 True Az=112.995 Ze=-166.005 Az status=0008 Ze status=0009 10:37:21 Check angles 10:37:21 SkyScan query 10:37:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:37:21 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:37:21 Message to Master queued w/err=0: serial=62046 error=0 10:37:26 Received message from Master: op=Filter serial=62047 10:37:26 Color wheel filter change from 0 to 0 10:37:26 FLIGetFilterPos err=0 currentPosition=0 10:37:26 FLIGetStepsRemaining err=0 RemainingSteps=0 10:37:26 Filter is already there-color wheel unchanged 10:37:27 Received message from Master: op=Shutter serial=62048 10:37:27 Shutter LASER open 10:37:27 Received message from Camera: op=State serial=62050 10:37:27 GetSingleValue result=40 Value=cccccccc 10:37:27 SkyScan query 10:37:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:37:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:27 Parameters OK 10:37:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:27 Set A/D data flow result=40 10:37:27 Set A/D channel type result=40 10:37:27 Set A/D encoding result=40 10:37:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:27 Set channel filter=0.000000e+000 result=40 10:37:27 Config A/D Result=40 10:37:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:27 Get A/D filter: -9.255963e+061 result=40 10:37:27 Get A/D value=-858993460 result=40 10:37:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:27 Parameters OK 10:37:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:27 Set A/D data flow result=40 10:37:27 Set A/D channel type result=40 10:37:27 Set A/D encoding result=40 10:37:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:27 Set channel filter=0.000000e+000 result=40 10:37:27 Config A/D Result=40 10:37:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:27 Get A/D filter: -9.255963e+061 result=40 10:37:27 Get A/D value=-858993460 result=40 10:37:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:37:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:37:27 Aux= 10:37:27 Message to Camera, serial 62050 queued 10:37:36 Received message from Master: op=Shutter serial=62060 10:37:36 Shutter LASER close 10:37:36 Received message from Master: op=PointingHead serial=62064 10:37:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:37:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:37:37 Point started: ret=0 10:37:37 point_skyscan result=0 10:37:37 Check angles 10:37:37 SkyScan query 10:37:38 SkyScan query done: ret=0 az=90.135<-6009 ze=157.44<-1504 Statuses=0009 0009 10:37:38 Msec=0 True Az=90.135 Ze=157.44 Az status=0009 Ze status=0009 10:37:38 Check angles 10:37:38 SkyScan query 10:37:39 SkyScan query done: ret=0 az=72.255<-4817 ze=136.05<-2930 Statuses=0009 0009 10:37:39 Msec=750 True Az=72.255 Ze=136.05 Az status=0009 Ze status=0009 10:37:39 Check angles 10:37:39 SkyScan query 10:37:39 SkyScan query done: ret=0 az=54.87<-3658 ze=115.05<-4330 Statuses=0009 0009 10:37:39 Msec=1500 True Az=54.87 Ze=115.05 Az status=0009 Ze status=0009 10:37:40 Check angles 10:37:40 SkyScan query 10:37:40 SkyScan query done: ret=0 az=40.875<-2725 ze=94.14<-5724 Statuses=0009 0009 10:37:40 Msec=2250 True Az=40.875 Ze=94.14 Az status=0009 Ze status=0009 10:37:40 Check angles 10:37:40 SkyScan query 10:37:41 SkyScan query done: ret=0 az=40.995<-2733 ze=73.17<-7122 Statuses=0008 0009 10:37:41 Msec=3000 True Az=40.995 Ze=73.17 Az status=0008 Ze status=0009 10:37:41 Check angles 10:37:41 SkyScan query 10:37:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.695<-8487 Statuses=0008 0009 10:37:42 Msec=3750 True Az=40.995 Ze=52.695 Az status=0008 Ze status=0009 10:37:42 Check angles 10:37:42 SkyScan query 10:37:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:37:42 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:37:42 Message to Master queued w/err=0: serial=62064 error=0 10:37:47 Received message from Master: op=Filter serial=62065 10:37:47 Color wheel filter change from 0 to 0 10:37:47 FLIGetFilterPos err=0 currentPosition=0 10:37:47 FLIGetStepsRemaining err=0 RemainingSteps=0 10:37:47 Filter is already there-color wheel unchanged 10:37:48 Received message from Master: op=Shutter serial=62066 10:37:48 Shutter LASER close 10:37:48 Received message from Camera: op=State serial=62068 10:37:48 GetSingleValue result=40 Value=cccccccc 10:37:48 SkyScan query 10:37:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:37:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:48 Parameters OK 10:37:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:48 Set A/D data flow result=40 10:37:48 Set A/D channel type result=40 10:37:48 Set A/D encoding result=40 10:37:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:48 Set channel filter=0.000000e+000 result=40 10:37:48 Config A/D Result=40 10:37:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:48 Get A/D filter: -9.255963e+061 result=40 10:37:48 Get A/D value=-858993460 result=40 10:37:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:48 Parameters OK 10:37:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:48 Set A/D data flow result=40 10:37:48 Set A/D channel type result=40 10:37:48 Set A/D encoding result=40 10:37:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:48 Set channel filter=0.000000e+000 result=40 10:37:48 Config A/D Result=40 10:37:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:48 Get A/D filter: -9.255963e+061 result=40 10:37:48 Get A/D value=-858993460 result=40 10:37:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:37:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:37:48 Aux= 10:37:48 Message to Camera, serial 62068 queued 10:38:25 Received message from Master: op=PointingHead serial=62081 10:38:25 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:38:25 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:38:26 Point started: ret=0 10:38:26 point_skyscan result=0 10:38:26 Check angles 10:38:26 SkyScan query 10:38:27 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 10:38:27 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 10:38:27 Check angles 10:38:27 SkyScan query 10:38:28 SkyScan query done: ret=0 az=82.14<-5476 ze=66.495<-7567 Statuses=0009 0008 10:38:28 Msec=750 True Az=82.14 Ze=66.495 Az status=0009 Ze status=0008 10:38:28 Check angles 10:38:28 SkyScan query 10:38:28 SkyScan query done: ret=0 az=99.735<-6649 ze=66.495<-7567 Statuses=0009 0008 10:38:28 Msec=1500 True Az=99.735 Ze=66.495 Az status=0009 Ze status=0008 10:38:29 Check angles 10:38:29 SkyScan query 10:38:29 SkyScan query done: ret=0 az=117.135<-7809 ze=66.495<-7567 Statuses=0009 0008 10:38:29 Msec=2250 True Az=117.135 Ze=66.495 Az status=0009 Ze status=0008 10:38:29 Check angles 10:38:29 SkyScan query 10:38:30 SkyScan query done: ret=0 az=134.565<-8971 ze=66.495<-7567 Statuses=0009 0008 10:38:30 Msec=3000 True Az=134.565 Ze=66.495 Az status=0009 Ze status=0008 10:38:30 Check angles 10:38:30 SkyScan query 10:38:31 SkyScan query done: ret=0 az=152.01<-10134 ze=66.495<-7567 Statuses=0009 0008 10:38:31 Msec=3750 True Az=152.01 Ze=66.495 Az status=0009 Ze status=0008 10:38:31 Check angles 10:38:31 SkyScan query 10:38:31 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:38:31 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 10:38:31 Message to Master queued w/err=0: serial=62081 error=0 10:38:36 Received message from Master: op=Filter serial=62082 10:38:36 Color wheel filter change from 0 to 0 10:38:36 FLIGetFilterPos err=0 currentPosition=0 10:38:36 FLIGetStepsRemaining err=0 RemainingSteps=0 10:38:36 Filter is already there-color wheel unchanged 10:38:37 Received message from Master: op=Shutter serial=62083 10:38:37 Shutter LASER close 10:38:37 Received message from Camera: op=State serial=62085 10:38:37 GetSingleValue result=40 Value=cccccccc 10:38:37 SkyScan query 10:38:37 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:38:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:37 Parameters OK 10:38:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:37 Set A/D data flow result=40 10:38:37 Set A/D channel type result=40 10:38:37 Set A/D encoding result=40 10:38:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:37 Set channel filter=0.000000e+000 result=40 10:38:37 Config A/D Result=40 10:38:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:37 Get A/D filter: -9.255963e+061 result=40 10:38:37 Get A/D value=-858993460 result=40 10:38:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:37 Parameters OK 10:38:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:37 Set A/D data flow result=40 10:38:37 Set A/D channel type result=40 10:38:37 Set A/D encoding result=40 10:38:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:37 Set channel filter=0.000000e+000 result=40 10:38:37 Config A/D Result=40 10:38:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:37 Get A/D filter: -9.255963e+061 result=40 10:38:37 Get A/D value=-858993460 result=40 10:38:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:37 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:38:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:38:37 Aux= 10:38:37 Message to Camera, serial 62085 queued 10:39:14 Received message from Master: op=PointingHead serial=62098 10:39:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:39:14 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:39:14 Point started: ret=0 10:39:14 point_skyscan result=0 10:39:15 Check angles 10:39:15 SkyScan query 10:39:16 SkyScan query done: ret=0 az=134.58<-8972 ze=36.615<-9559 Statuses=0009 0009 10:39:16 Msec=0 True Az=134.58 Ze=36.615 Az status=0009 Ze status=0009 10:39:16 Check angles 10:39:16 SkyScan query 10:39:16 SkyScan query done: ret=0 az=116.88<-7792 ze=15.27<-10982 Statuses=0009 0009 10:39:16 Msec=750 True Az=116.88 Ze=15.27 Az status=0009 Ze status=0009 10:39:17 Check angles 10:39:17 SkyScan query 10:39:17 SkyScan query done: ret=0 az=99.015<-6601 ze=-6.18<-12412 Statuses=0009 0009 10:39:17 Msec=1500 True Az=99.015 Ze=-6.18 Az status=0009 Ze status=0009 10:39:17 Check angles 10:39:17 SkyScan query 10:39:18 SkyScan query done: ret=0 az=81.675<-5445 ze=-27.15<-13810 Statuses=0009 0009 10:39:18 Msec=2250 True Az=81.675 Ze=-27.15 Az status=0009 Ze status=0009 10:39:18 Check angles 10:39:18 SkyScan query 10:39:19 SkyScan query done: ret=0 az=63.795<-4253 ze=-38.58<-14572 Statuses=0009 0008 10:39:19 Msec=3000 True Az=63.795 Ze=-38.58 Az status=0009 Ze status=0008 10:39:19 Check angles 10:39:19 SkyScan query 10:39:19 SkyScan query done: ret=0 az=46.335<-3089 ze=-38.52<-14568 Statuses=0009 0008 10:39:19 Msec=3750 True Az=46.335 Ze=-38.52 Az status=0009 Ze status=0008 10:39:20 Check angles 10:39:20 SkyScan query 10:39:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:39:20 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:39:20 Message to Master queued w/err=0: serial=62098 error=0 10:39:25 Received message from Master: op=Filter serial=62099 10:39:25 Color wheel filter change from 0 to 0 10:39:25 FLIGetFilterPos err=0 currentPosition=0 10:39:25 FLIGetStepsRemaining err=0 RemainingSteps=0 10:39:25 Filter is already there-color wheel unchanged 10:39:25 Received message from Master: op=Shutter serial=62100 10:39:25 Shutter LASER close 10:39:25 Received message from Camera: op=State serial=62102 10:39:25 GetSingleValue result=40 Value=cccccccc 10:39:25 SkyScan query 10:39:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:39:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:26 Parameters OK 10:39:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:26 Set A/D data flow result=40 10:39:26 Set A/D channel type result=40 10:39:26 Set A/D encoding result=40 10:39:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:26 Set channel filter=0.000000e+000 result=40 10:39:26 Config A/D Result=40 10:39:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:26 Get A/D filter: -9.255963e+061 result=40 10:39:26 Get A/D value=-858993460 result=40 10:39:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:26 Parameters OK 10:39:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:26 Set A/D data flow result=40 10:39:26 Set A/D channel type result=40 10:39:26 Set A/D encoding result=40 10:39:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:26 Set channel filter=0.000000e+000 result=40 10:39:26 Config A/D Result=40 10:39:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:26 Get A/D filter: -9.255963e+061 result=40 10:39:26 Get A/D value=-858993460 result=40 10:39:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:39:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:39:26 Aux= 10:39:26 Message to Camera, serial 62102 queued 10:40:03 Received message from Master: op=PointingHead serial=62115 10:40:03 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:40:03 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:40:03 Point started: ret=0 10:40:03 point_skyscan result=0 10:40:04 Check angles 10:40:04 SkyScan query 10:40:05 SkyScan query done: ret=0 az=63.765<-4251 ze=-67.98<-16532 Statuses=0009 0009 10:40:05 Msec=0 True Az=63.765 Ze=-67.98 Az status=0009 Ze status=0009 10:40:05 Check angles 10:40:05 SkyScan query 10:40:05 SkyScan query done: ret=0 az=81.06<-5404 ze=-88.965<-17931 Statuses=0009 0009 10:40:05 Msec=750 True Az=81.06 Ze=-88.965 Az status=0009 Ze status=0009 10:40:05 Check angles 10:40:05 SkyScan query 10:40:06 SkyScan query done: ret=0 az=98.625<-6575 ze=-109.89<-19326 Statuses=0009 0009 10:40:06 Msec=1500 True Az=98.625 Ze=-109.89 Az status=0009 Ze status=0009 10:40:06 Check angles 10:40:06 SkyScan query 10:40:07 SkyScan query done: ret=0 az=116.61<-7774 ze=-131.31<-20754 Statuses=0009 0009 10:40:07 Msec=2250 True Az=116.61 Ze=-131.31 Az status=0009 Ze status=0009 10:40:07 Check angles 10:40:07 SkyScan query 10:40:08 SkyScan query done: ret=0 az=131.19<-8746 ze=-141.555<-21437 Statuses=0009 0008 10:40:08 Msec=3000 True Az=131.19 Ze=-141.555 Az status=0009 Ze status=0008 10:40:08 Check angles 10:40:08 SkyScan query 10:40:08 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 10:40:08 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 10:40:08 Message to Master queued w/err=0: serial=62115 error=0 10:40:13 Received message from Master: op=Filter serial=62116 10:40:13 Color wheel filter change from 0 to 0 10:40:13 FLIGetFilterPos err=0 currentPosition=0 10:40:13 FLIGetStepsRemaining err=0 RemainingSteps=0 10:40:13 Filter is already there-color wheel unchanged 10:40:13 Received message from Master: op=Shutter serial=62117 10:40:13 Shutter LASER close 10:40:13 Received message from Camera: op=State serial=62119 10:40:13 GetSingleValue result=40 Value=cccccccc 10:40:13 SkyScan query 10:40:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:40:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:14 Parameters OK 10:40:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:14 Set A/D data flow result=40 10:40:14 Set A/D channel type result=40 10:40:14 Set A/D encoding result=40 10:40:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:14 Set channel filter=0.000000e+000 result=40 10:40:14 Config A/D Result=40 10:40:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:14 Get A/D filter: -9.255963e+061 result=40 10:40:14 Get A/D value=-858993460 result=40 10:40:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:14 Parameters OK 10:40:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:14 Set A/D data flow result=40 10:40:14 Set A/D channel type result=40 10:40:14 Set A/D encoding result=40 10:40:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:14 Set channel filter=0.000000e+000 result=40 10:40:14 Config A/D Result=40 10:40:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:14 Get A/D filter: -9.255963e+061 result=40 10:40:14 Get A/D value=-858993460 result=40 10:40:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:14 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:40:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:40:14 Aux= 10:40:14 Message to Camera, serial 62119 queued 10:40:51 Received message from Master: op=PointingHead serial=62132 10:40:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:40:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:40:51 Point started: ret=0 10:40:51 point_skyscan result=0 10:40:52 Check angles 10:40:52 SkyScan query 10:40:53 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 10:40:53 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 10:40:53 Check angles 10:40:53 SkyScan query 10:40:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:40:53 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:40:53 Message to Master queued w/err=0: serial=62132 error=0 10:40:58 Received message from Master: op=Filter serial=62133 10:40:58 Color wheel filter change from 0 to 0 10:40:58 FLIGetFilterPos err=0 currentPosition=0 10:40:58 FLIGetStepsRemaining err=0 RemainingSteps=0 10:40:58 Filter is already there-color wheel unchanged 10:40:59 Received message from Master: op=Shutter serial=62134 10:40:59 Shutter LASER open 10:40:59 Received message from Camera: op=State serial=62136 10:40:59 GetSingleValue result=40 Value=cccccccc 10:40:59 SkyScan query 10:40:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:40:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:59 Parameters OK 10:40:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:59 Set A/D data flow result=40 10:40:59 Set A/D channel type result=40 10:40:59 Set A/D encoding result=40 10:40:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:59 Set channel filter=0.000000e+000 result=40 10:40:59 Config A/D Result=40 10:40:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:59 Get A/D filter: -9.255963e+061 result=40 10:40:59 Get A/D value=-858993460 result=40 10:40:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:59 Parameters OK 10:40:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:59 Set A/D data flow result=40 10:40:59 Set A/D channel type result=40 10:40:59 Set A/D encoding result=40 10:40:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:59 Set channel filter=0.000000e+000 result=40 10:40:59 Config A/D Result=40 10:40:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:59 Get A/D filter: -9.255963e+061 result=40 10:40:59 Get A/D value=-858993460 result=40 10:40:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:40:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:40:59 Aux= 10:40:59 Message to Camera, serial 62136 queued 10:41:08 Received message from Master: op=Shutter serial=62146 10:41:08 Shutter LASER close 10:41:08 Received message from Master: op=PointingHead serial=62150 10:41:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:41:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:41:09 Point started: ret=0 10:41:09 point_skyscan result=0 10:41:09 Check angles 10:41:09 SkyScan query 10:41:10 SkyScan query done: ret=0 az=135.87<-9058 ze=-143.31<-21554 Statuses=0009 0009 10:41:10 Msec=0 True Az=135.87 Ze=-143.31 Az status=0009 Ze status=0009 10:41:10 Check angles 10:41:10 SkyScan query 10:41:11 SkyScan query done: ret=0 az=153.33<-10222 ze=-122.37<-20158 Statuses=0009 0009 10:41:11 Msec=750 True Az=153.33 Ze=-122.37 Az status=0009 Ze status=0009 10:41:11 Check angles 10:41:11 SkyScan query 10:41:12 SkyScan query done: ret=0 az=170.805<-11387 ze=-101.46<-18764 Statuses=0009 0009 10:41:12 Msec=1500 True Az=170.805 Ze=-101.46 Az status=0009 Ze status=0009 10:41:12 Check angles 10:41:12 SkyScan query 10:41:12 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.46<-17364 Statuses=0008 0009 10:41:12 Msec=2250 True Az=176.025 Ze=-80.46 Az status=0008 Ze status=0009 10:41:12 Check angles 10:41:12 SkyScan query 10:41:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.505<-15967 Statuses=0008 0009 10:41:13 Msec=3000 True Az=175.995 Ze=-59.505 Az status=0008 Ze status=0009 10:41:13 Check angles 10:41:13 SkyScan query 10:41:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:41:14 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:41:14 Message to Master queued w/err=0: serial=62150 error=0 10:41:19 Received message from Master: op=Filter serial=62151 10:41:19 Color wheel filter change from 0 to 0 10:41:19 FLIGetFilterPos err=0 currentPosition=0 10:41:19 FLIGetStepsRemaining err=0 RemainingSteps=0 10:41:19 Filter is already there-color wheel unchanged 10:41:19 Received message from Master: op=Shutter serial=62152 10:41:19 Shutter LASER close 10:41:19 Received message from Camera: op=State serial=62154 10:41:19 GetSingleValue result=40 Value=cccccccc 10:41:19 SkyScan query 10:41:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:41:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:20 Parameters OK 10:41:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:20 Set A/D data flow result=40 10:41:20 Set A/D channel type result=40 10:41:20 Set A/D encoding result=40 10:41:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:20 Set channel filter=0.000000e+000 result=40 10:41:20 Config A/D Result=40 10:41:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:20 Get A/D filter: -9.255963e+061 result=40 10:41:20 Get A/D value=-858993460 result=40 10:41:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:20 Parameters OK 10:41:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:20 Set A/D data flow result=40 10:41:20 Set A/D channel type result=40 10:41:20 Set A/D encoding result=40 10:41:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:20 Set channel filter=0.000000e+000 result=40 10:41:20 Config A/D Result=40 10:41:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:20 Get A/D filter: -9.255963e+061 result=40 10:41:20 Get A/D value=-858993460 result=40 10:41:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:41:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:41:20 Aux= 10:41:20 Message to Camera, serial 62154 queued 10:41:57 Received message from Master: op=PointingHead serial=62167 10:41:57 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:41:57 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:41:57 Point started: ret=0 10:41:57 point_skyscan result=0 10:41:58 Check angles 10:41:58 SkyScan query 10:41:58 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.02<-13468 Statuses=0009 0009 10:41:58 Msec=0 True Az=153.225 Ze=-22.02 Az status=0009 Ze status=0009 10:41:58 Check angles 10:41:58 SkyScan query 10:41:59 SkyScan query done: ret=0 az=135.48<-9032 ze=-0.6<-12040 Statuses=0009 0009 10:41:59 Msec=750 True Az=135.48 Ze=-0.6 Az status=0009 Ze status=0009 10:41:59 Check angles 10:41:59 SkyScan query 10:42:00 SkyScan query done: ret=0 az=117.48<-7832 ze=20.79<-10614 Statuses=0009 0009 10:42:00 Msec=1500 True Az=117.48 Ze=20.79 Az status=0009 Ze status=0009 10:42:00 Check angles 10:42:00 SkyScan query 10:42:00 SkyScan query done: ret=0 az=100.095<-6673 ze=41.73<-9218 Statuses=0009 0009 10:42:00 Msec=2250 True Az=100.095 Ze=41.73 Az status=0009 Ze status=0009 10:42:01 Check angles 10:42:01 SkyScan query 10:42:01 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 10:42:01 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 10:42:01 Check angles 10:42:01 SkyScan query 10:42:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:42:02 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:42:02 Message to Master queued w/err=0: serial=62167 error=0 10:42:07 Received message from Master: op=Filter serial=62168 10:42:07 Color wheel filter change from 0 to 0 10:42:07 FLIGetFilterPos err=0 currentPosition=0 10:42:07 FLIGetStepsRemaining err=0 RemainingSteps=0 10:42:07 Filter is already there-color wheel unchanged 10:42:07 Received message from Master: op=Shutter serial=62169 10:42:07 Shutter LASER close 10:42:07 Received message from Camera: op=State serial=62171 10:42:07 GetSingleValue result=40 Value=cccccccc 10:42:07 SkyScan query 10:42:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:42:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:08 Parameters OK 10:42:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:08 Set A/D data flow result=40 10:42:08 Set A/D channel type result=40 10:42:08 Set A/D encoding result=40 10:42:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:08 Set channel filter=0.000000e+000 result=40 10:42:08 Config A/D Result=40 10:42:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:08 Get A/D filter: -9.255963e+061 result=40 10:42:08 Get A/D value=-858993460 result=40 10:42:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:08 Parameters OK 10:42:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:08 Set A/D data flow result=40 10:42:08 Set A/D channel type result=40 10:42:08 Set A/D encoding result=40 10:42:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:08 Set channel filter=0.000000e+000 result=40 10:42:08 Config A/D Result=40 10:42:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:08 Get A/D filter: -9.255963e+061 result=40 10:42:08 Get A/D value=-858993460 result=40 10:42:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:42:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:42:08 Aux= 10:42:08 Message to Camera, serial 62171 queued 10:42:44 Received message from Master: op=PointingHead serial=62183 10:42:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:42:44 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:42:44 Point started: ret=0 10:42:44 point_skyscan result=0 10:42:45 Check angles 10:42:45 SkyScan query 10:42:45 SkyScan query done: ret=0 az=109.395<-7293 ze=38.49<-9434 Statuses=0009 0008 10:42:45 Msec=0 True Az=109.395 Ze=38.49 Az status=0009 Ze status=0008 10:42:46 Check angles 10:42:46 SkyScan query 10:42:46 SkyScan query done: ret=0 az=127.11<-8474 ze=38.505<-9433 Statuses=0009 0008 10:42:46 Msec=750 True Az=127.11 Ze=38.505 Az status=0009 Ze status=0008 10:42:46 Check angles 10:42:46 SkyScan query 10:42:47 SkyScan query done: ret=0 az=144.615<-9641 ze=38.505<-9433 Statuses=0009 0008 10:42:47 Msec=1500 True Az=144.615 Ze=38.505 Az status=0009 Ze status=0008 10:42:47 Check angles 10:42:47 SkyScan query 10:42:48 SkyScan query done: ret=0 az=162.18<-10812 ze=38.505<-9433 Statuses=0009 0008 10:42:48 Msec=2250 True Az=162.18 Ze=38.505 Az status=0009 Ze status=0008 10:42:48 Check angles 10:42:48 SkyScan query 10:42:48 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:42:48 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:42:49 Check angles 10:42:49 SkyScan query 10:42:49 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:42:49 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:42:49 Message to Master queued w/err=0: serial=62183 error=0 10:42:54 Received message from Master: op=Filter serial=62184 10:42:54 Color wheel filter change from 0 to 0 10:42:54 FLIGetFilterPos err=0 currentPosition=0 10:42:54 FLIGetStepsRemaining err=0 RemainingSteps=0 10:42:54 Filter is already there-color wheel unchanged 10:42:54 Received message from Master: op=Shutter serial=62185 10:42:54 Shutter LASER close 10:42:54 Received message from Camera: op=State serial=62187 10:42:54 GetSingleValue result=40 Value=cccccccc 10:42:54 SkyScan query 10:42:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:42:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:55 Parameters OK 10:42:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:55 Set A/D data flow result=40 10:42:55 Set A/D channel type result=40 10:42:55 Set A/D encoding result=40 10:42:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:55 Set channel filter=0.000000e+000 result=40 10:42:55 Config A/D Result=40 10:42:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:55 Get A/D filter: -9.255963e+061 result=40 10:42:55 Get A/D value=-858993460 result=40 10:42:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:55 Parameters OK 10:42:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:55 Set A/D data flow result=40 10:42:55 Set A/D channel type result=40 10:42:55 Set A/D encoding result=40 10:42:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:55 Set channel filter=0.000000e+000 result=40 10:42:55 Config A/D Result=40 10:42:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:55 Get A/D filter: -9.255963e+061 result=40 10:42:55 Get A/D value=-858993460 result=40 10:42:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:42:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:42:55 Aux= 10:42:55 Message to Camera, serial 62187 queued 10:43:32 Received message from Master: op=PointingHead serial=62200 10:43:32 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:43:32 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:43:32 Point started: ret=0 10:43:32 point_skyscan result=0 10:43:33 Check angles 10:43:33 SkyScan query 10:43:33 SkyScan query done: ret=0 az=153.24<-10216 ze=8.97<-11402 Statuses=0009 0009 10:43:33 Msec=0 True Az=153.24 Ze=8.97 Az status=0009 Ze status=0009 10:43:34 Check angles 10:43:34 SkyScan query 10:43:34 SkyScan query done: ret=0 az=135.855<-9057 ze=-12.015<-12801 Statuses=0009 0009 10:43:34 Msec=750 True Az=135.855 Ze=-12.015 Az status=0009 Ze status=0009 10:43:34 Check angles 10:43:34 SkyScan query 10:43:35 SkyScan query done: ret=0 az=118.275<-7885 ze=-32.925<-14195 Statuses=0009 0009 10:43:35 Msec=1500 True Az=118.275 Ze=-32.925 Az status=0009 Ze status=0009 10:43:35 Check angles 10:43:35 SkyScan query 10:43:36 SkyScan query done: ret=0 az=100.665<-6711 ze=-51.495<-15433 Statuses=0009 0009 10:43:36 Msec=2250 True Az=100.665 Ze=-51.495 Az status=0009 Ze status=0009 10:43:36 Check angles 10:43:36 SkyScan query 10:43:36 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 10:43:36 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 10:43:37 Check angles 10:43:37 SkyScan query 10:43:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:43:37 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:43:37 Message to Master queued w/err=0: serial=62200 error=0 10:43:42 Received message from Master: op=Filter serial=62201 10:43:42 Color wheel filter change from 0 to 0 10:43:42 FLIGetFilterPos err=0 currentPosition=0 10:43:42 FLIGetStepsRemaining err=0 RemainingSteps=0 10:43:42 Filter is already there-color wheel unchanged 10:43:42 Received message from Master: op=Shutter serial=62202 10:43:42 Shutter LASER close 10:43:42 Received message from Camera: op=State serial=62204 10:43:42 GetSingleValue result=40 Value=cccccccc 10:43:42 SkyScan query 10:43:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:43:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:43 Parameters OK 10:43:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:43 Set A/D data flow result=40 10:43:43 Set A/D channel type result=40 10:43:43 Set A/D encoding result=40 10:43:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:43 Set channel filter=0.000000e+000 result=40 10:43:43 Config A/D Result=40 10:43:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:43 Get A/D filter: -9.255963e+061 result=40 10:43:43 Get A/D value=-858993460 result=40 10:43:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:43 Parameters OK 10:43:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:43 Set A/D data flow result=40 10:43:43 Set A/D channel type result=40 10:43:43 Set A/D encoding result=40 10:43:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:43 Set channel filter=0.000000e+000 result=40 10:43:43 Config A/D Result=40 10:43:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:43 Get A/D filter: -9.255963e+061 result=40 10:43:43 Get A/D value=-858993460 result=40 10:43:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:43:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:43:43 Aux= 10:43:43 Message to Camera, serial 62204 queued 10:44:20 Received message from Master: op=PointingHead serial=62217 10:44:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:44:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:44:20 Point started: ret=0 10:44:20 point_skyscan result=0 10:44:21 Check angles 10:44:21 SkyScan query 10:44:21 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.195<-17413 Statuses=0009 0009 10:44:21 Msec=0 True Az=108.975 Ze=-81.195 Az status=0009 Ze status=0009 10:44:22 Check angles 10:44:22 SkyScan query 10:44:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.615<-18841 Statuses=0008 0009 10:44:22 Msec=750 True Az=112.995 Ze=-102.615 Az status=0008 Ze status=0009 10:44:22 Check angles 10:44:22 SkyScan query 10:44:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.975<-20265 Statuses=0008 0009 10:44:23 Msec=1500 True Az=112.995 Ze=-123.975 Az status=0008 Ze status=0009 10:44:23 Check angles 10:44:23 SkyScan query 10:44:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.93<-21662 Statuses=0008 0009 10:44:24 Msec=2250 True Az=112.995 Ze=-144.93 Az status=0008 Ze status=0009 10:44:24 Check angles 10:44:24 SkyScan query 10:44:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.305<-23087 Statuses=0008 0009 10:44:25 Msec=3000 True Az=112.995 Ze=-166.305 Az status=0008 Ze status=0009 10:44:25 Check angles 10:44:25 SkyScan query 10:44:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:44:25 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:44:25 Message to Master queued w/err=0: serial=62217 error=0 10:44:30 Received message from Master: op=Filter serial=62218 10:44:30 Color wheel filter change from 0 to 0 10:44:30 FLIGetFilterPos err=0 currentPosition=0 10:44:30 FLIGetStepsRemaining err=0 RemainingSteps=0 10:44:30 Filter is already there-color wheel unchanged 10:44:30 Received message from Master: op=Shutter serial=62219 10:44:30 Shutter LASER open 10:44:31 Received message from Camera: op=State serial=62221 10:44:31 GetSingleValue result=40 Value=cccccccc 10:44:31 SkyScan query 10:44:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:44:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:31 Parameters OK 10:44:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:31 Set A/D data flow result=40 10:44:31 Set A/D channel type result=40 10:44:31 Set A/D encoding result=40 10:44:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:31 Set channel filter=0.000000e+000 result=40 10:44:31 Config A/D Result=40 10:44:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:31 Get A/D filter: -9.255963e+061 result=40 10:44:31 Get A/D value=-858993460 result=40 10:44:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:31 Parameters OK 10:44:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:31 Set A/D data flow result=40 10:44:31 Set A/D channel type result=40 10:44:31 Set A/D encoding result=40 10:44:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:31 Set channel filter=0.000000e+000 result=40 10:44:31 Config A/D Result=40 10:44:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:31 Get A/D filter: -9.255963e+061 result=40 10:44:31 Get A/D value=-858993460 result=40 10:44:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:44:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:44:31 Aux= 10:44:31 Message to Camera, serial 62221 queued 10:44:40 Received message from Master: op=Shutter serial=62231 10:44:40 Shutter LASER close 10:44:40 Received message from Master: op=PointingHead serial=62235 10:44:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:44:40 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:44:40 Point started: ret=0 10:44:40 point_skyscan result=0 10:44:41 Check angles 10:44:41 SkyScan query 10:44:42 SkyScan query done: ret=0 az=89.685<-5979 ze=157.02<-1532 Statuses=0009 0009 10:44:42 Msec=0 True Az=89.685 Ze=157.02 Az status=0009 Ze status=0009 10:44:42 Check angles 10:44:42 SkyScan query 10:44:42 SkyScan query done: ret=0 az=72.24<-4816 ze=136.05<-2930 Statuses=0009 0009 10:44:42 Msec=750 True Az=72.24 Ze=136.05 Az status=0009 Ze status=0009 10:44:43 Check angles 10:44:43 SkyScan query 10:44:43 SkyScan query done: ret=0 az=54.66<-3644 ze=114.66<-4356 Statuses=0009 0009 10:44:43 Msec=1500 True Az=54.66 Ze=114.66 Az status=0009 Ze status=0009 10:44:43 Check angles 10:44:43 SkyScan query 10:44:44 SkyScan query done: ret=0 az=40.92<-2728 ze=93.705<-5753 Statuses=0009 0009 10:44:44 Msec=2250 True Az=40.92 Ze=93.705 Az status=0009 Ze status=0009 10:44:44 Check angles 10:44:44 SkyScan query 10:44:45 SkyScan query done: ret=0 az=40.995<-2733 ze=72.72<-7152 Statuses=0008 0009 10:44:45 Msec=3000 True Az=40.995 Ze=72.72 Az status=0008 Ze status=0009 10:44:45 Check angles 10:44:45 SkyScan query 10:44:46 SkyScan query done: ret=0 az=40.995<-2733 ze=52.185<-8521 Statuses=0008 0009 10:44:46 Msec=3750 True Az=40.995 Ze=52.185 Az status=0008 Ze status=0009 10:44:46 Check angles 10:44:46 SkyScan query 10:44:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:44:46 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:44:46 Message to Master queued w/err=0: serial=62235 error=0 10:44:51 Received message from Master: op=Filter serial=62236 10:44:51 Color wheel filter change from 0 to 0 10:44:51 FLIGetFilterPos err=0 currentPosition=0 10:44:51 FLIGetStepsRemaining err=0 RemainingSteps=0 10:44:51 Filter is already there-color wheel unchanged 10:44:51 Received message from Master: op=Shutter serial=62237 10:44:51 Shutter LASER close 10:44:52 Received message from Camera: op=State serial=62239 10:44:52 GetSingleValue result=40 Value=cccccccc 10:44:52 SkyScan query 10:44:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:44:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:52 Parameters OK 10:44:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:52 Set A/D data flow result=40 10:44:52 Set A/D channel type result=40 10:44:52 Set A/D encoding result=40 10:44:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:52 Set channel filter=0.000000e+000 result=40 10:44:52 Config A/D Result=40 10:44:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:52 Get A/D filter: -9.255963e+061 result=40 10:44:52 Get A/D value=-858993460 result=40 10:44:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:52 Parameters OK 10:44:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:52 Set A/D data flow result=40 10:44:52 Set A/D channel type result=40 10:44:52 Set A/D encoding result=40 10:44:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:52 Set channel filter=0.000000e+000 result=40 10:44:52 Config A/D Result=40 10:44:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:52 Get A/D filter: -9.255963e+061 result=40 10:44:52 Get A/D value=-858993460 result=40 10:44:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:44:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:44:52 Aux= 10:44:52 Message to Camera, serial 62239 queued 10:45:29 Received message from Master: op=Identify serial=62248 10:45:29 Received message from Master: op=PointingHead serial=62255 10:45:29 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:45:29 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:45:29 Point started: ret=0 10:45:29 point_skyscan result=0 10:45:30 Check angles 10:45:30 SkyScan query 10:45:31 SkyScan query done: ret=0 az=63.945<-4263 ze=66.54<-7564 Statuses=0009 0008 10:45:31 Msec=0 True Az=63.945 Ze=66.54 Az status=0009 Ze status=0008 10:45:31 Check angles 10:45:31 SkyScan query 10:45:31 SkyScan query done: ret=0 az=81.645<-5443 ze=66.495<-7567 Statuses=0009 0008 10:45:31 Msec=750 True Az=81.645 Ze=66.495 Az status=0009 Ze status=0008 10:45:32 Check angles 10:45:32 SkyScan query 10:45:32 SkyScan query done: ret=0 az=99.75<-6650 ze=66.495<-7567 Statuses=0009 0008 10:45:32 Msec=1500 True Az=99.75 Ze=66.495 Az status=0009 Ze status=0008 10:45:32 Check angles 10:45:32 SkyScan query 10:45:33 SkyScan query done: ret=0 az=117.555<-7837 ze=66.495<-7567 Statuses=0009 0008 10:45:33 Msec=2250 True Az=117.555 Ze=66.495 Az status=0009 Ze status=0008 10:45:33 Check angles 10:45:33 SkyScan query 10:45:34 SkyScan query done: ret=0 az=134.835<-8989 ze=66.495<-7567 Statuses=0009 0008 10:45:34 Msec=3000 True Az=134.835 Ze=66.495 Az status=0009 Ze status=0008 10:45:34 Check angles 10:45:34 SkyScan query 10:45:35 SkyScan query done: ret=0 az=152.715<-10181 ze=66.495<-7567 Statuses=0009 0008 10:45:35 Msec=3750 True Az=152.715 Ze=66.495 Az status=0009 Ze status=0008 10:45:35 Check angles 10:45:35 SkyScan query 10:45:35 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 10:45:35 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 10:45:35 Message to Master queued w/err=0: serial=62255 error=0 10:45:40 Received message from Master: op=Filter serial=62256 10:45:40 Color wheel filter change from 0 to 0 10:45:40 FLIGetFilterPos err=0 currentPosition=0 10:45:40 FLIGetStepsRemaining err=0 RemainingSteps=0 10:45:40 Filter is already there-color wheel unchanged 10:45:40 Received message from Master: op=Shutter serial=62257 10:45:40 Shutter LASER close 10:45:41 Received message from Camera: op=State serial=62259 10:45:41 GetSingleValue result=40 Value=cccccccc 10:45:41 SkyScan query 10:45:41 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:45:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:41 Parameters OK 10:45:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:41 Set A/D data flow result=40 10:45:41 Set A/D channel type result=40 10:45:41 Set A/D encoding result=40 10:45:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:41 Set channel filter=0.000000e+000 result=40 10:45:41 Config A/D Result=40 10:45:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:41 Get A/D filter: -9.255963e+061 result=40 10:45:41 Get A/D value=-858993460 result=40 10:45:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:41 Parameters OK 10:45:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:41 Set A/D data flow result=40 10:45:41 Set A/D channel type result=40 10:45:41 Set A/D encoding result=40 10:45:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:41 Set channel filter=0.000000e+000 result=40 10:45:41 Config A/D Result=40 10:45:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:41 Get A/D filter: -9.255963e+061 result=40 [UTC 2018-12-11 10:45:41] 10:45:41 Get A/D value=-858993460 result=40 10:45:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:41 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:45:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:45:41 Aux= 10:45:41 Message to Camera, serial 62259 queued 10:46:18 Received message from Master: op=PointingHead serial=62272 10:46:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:46:18 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:46:18 Point started: ret=0 10:46:18 point_skyscan result=0 10:46:19 Check angles 10:46:19 SkyScan query 10:46:20 SkyScan query done: ret=0 az=134.745<-8983 ze=36.45<-9570 Statuses=0009 0009 10:46:20 Msec=0 True Az=134.745 Ze=36.45 Az status=0009 Ze status=0009 10:46:20 Check angles 10:46:20 SkyScan query 10:46:20 SkyScan query done: ret=0 az=117.21<-7814 ze=15.495<-10967 Statuses=0009 0009 10:46:20 Msec=750 True Az=117.21 Ze=15.495 Az status=0009 Ze status=0009 10:46:21 Check angles 10:46:21 SkyScan query 10:46:21 SkyScan query done: ret=0 az=99.465<-6631 ze=-5.895<-12393 Statuses=0009 0009 10:46:21 Msec=1500 True Az=99.465 Ze=-5.895 Az status=0009 Ze status=0009 10:46:21 Check angles 10:46:21 SkyScan query 10:46:22 SkyScan query done: ret=0 az=82.065<-5471 ze=-26.85<-13790 Statuses=0009 0009 10:46:22 Msec=2250 True Az=82.065 Ze=-26.85 Az status=0009 Ze status=0009 10:46:22 Check angles 10:46:22 SkyScan query 10:46:23 SkyScan query done: ret=0 az=64.545<-4303 ze=-38.58<-14572 Statuses=0009 0008 10:46:23 Msec=3000 True Az=64.545 Ze=-38.58 Az status=0009 Ze status=0008 10:46:23 Check angles 10:46:23 SkyScan query 10:46:23 SkyScan query done: ret=0 az=46.68<-3112 ze=-38.52<-14568 Statuses=0009 0008 10:46:23 Msec=3750 True Az=46.68 Ze=-38.52 Az status=0009 Ze status=0008 10:46:24 Check angles 10:46:24 SkyScan query 10:46:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:46:24 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:46:24 Message to Master queued w/err=0: serial=62272 error=0 10:46:29 Received message from Master: op=Filter serial=62273 10:46:29 Color wheel filter change from 0 to 0 10:46:29 FLIGetFilterPos err=0 currentPosition=0 10:46:29 FLIGetStepsRemaining err=0 RemainingSteps=0 10:46:29 Filter is already there-color wheel unchanged 10:46:29 Received message from Master: op=Shutter serial=62274 10:46:29 Shutter LASER close 10:46:29 Received message from Camera: op=State serial=62276 10:46:29 GetSingleValue result=40 Value=cccccccc 10:46:29 SkyScan query 10:46:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:46:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:30 Parameters OK 10:46:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:30 Set A/D data flow result=40 10:46:30 Set A/D channel type result=40 10:46:30 Set A/D encoding result=40 10:46:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:30 Set channel filter=0.000000e+000 result=40 10:46:30 Config A/D Result=40 10:46:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:30 Get A/D filter: -9.255963e+061 result=40 10:46:30 Get A/D value=-858993460 result=40 10:46:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:30 Parameters OK 10:46:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:30 Set A/D data flow result=40 10:46:30 Set A/D channel type result=40 10:46:30 Set A/D encoding result=40 10:46:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:30 Set channel filter=0.000000e+000 result=40 10:46:30 Config A/D Result=40 10:46:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:30 Get A/D filter: -9.255963e+061 result=40 10:46:30 Get A/D value=-858993460 result=40 10:46:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:46:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:46:30 Aux= 10:46:30 Message to Camera, serial 62276 queued 10:47:07 Received message from Master: op=PointingHead serial=62289 10:47:07 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:47:07 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:47:07 Point started: ret=0 10:47:07 point_skyscan result=0 10:47:08 Check angles 10:47:08 SkyScan query 10:47:08 SkyScan query done: ret=0 az=63.795<-4253 ze=-67.965<-16531 Statuses=0009 0009 10:47:08 Msec=0 True Az=63.795 Ze=-67.965 Az status=0009 Ze status=0009 10:47:09 Check angles 10:47:09 SkyScan query 10:47:09 SkyScan query done: ret=0 az=81.135<-5409 ze=-88.965<-17931 Statuses=0009 0009 10:47:09 Msec=750 True Az=81.135 Ze=-88.965 Az status=0009 Ze status=0009 10:47:09 Check angles 10:47:09 SkyScan query 10:47:10 SkyScan query done: ret=0 az=98.595<-6573 ze=-109.875<-19325 Statuses=0009 0009 10:47:10 Msec=1500 True Az=98.595 Ze=-109.875 Az status=0009 Ze status=0009 10:47:10 Check angles 10:47:10 SkyScan query 10:47:11 SkyScan query done: ret=0 az=116.205<-7747 ze=-130.86<-20724 Statuses=0009 0009 10:47:11 Msec=2250 True Az=116.205 Ze=-130.86 Az status=0009 Ze status=0009 10:47:11 Check angles 10:47:11 SkyScan query 10:47:11 SkyScan query done: ret=0 az=131.19<-8746 ze=-141.54<-21436 Statuses=0009 0008 10:47:11 Msec=3000 True Az=131.19 Ze=-141.54 Az status=0009 Ze status=0008 10:47:12 Check angles 10:47:12 SkyScan query 10:47:12 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:47:12 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:47:12 Message to Master queued w/err=0: serial=62289 error=0 10:47:17 Received message from Master: op=Filter serial=62290 10:47:17 Color wheel filter change from 0 to 0 10:47:17 FLIGetFilterPos err=0 currentPosition=0 10:47:17 FLIGetStepsRemaining err=0 RemainingSteps=0 10:47:17 Filter is already there-color wheel unchanged 10:47:17 Received message from Master: op=Shutter serial=62291 10:47:17 Shutter LASER close 10:47:17 Received message from Camera: op=State serial=62293 10:47:17 GetSingleValue result=40 Value=cccccccc 10:47:17 SkyScan query 10:47:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:47:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:18 Parameters OK 10:47:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:18 Set A/D data flow result=40 10:47:18 Set A/D channel type result=40 10:47:18 Set A/D encoding result=40 10:47:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:18 Set channel filter=0.000000e+000 result=40 10:47:18 Config A/D Result=40 10:47:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:18 Get A/D filter: -9.255963e+061 result=40 10:47:18 Get A/D value=-858993460 result=40 10:47:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:18 Parameters OK 10:47:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:18 Set A/D data flow result=40 10:47:18 Set A/D channel type result=40 10:47:18 Set A/D encoding result=40 10:47:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:18 Set channel filter=0.000000e+000 result=40 10:47:18 Config A/D Result=40 10:47:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:18 Get A/D filter: -9.255963e+061 result=40 10:47:18 Get A/D value=-858993460 result=40 10:47:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:18 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:47:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:47:18 Aux= 10:47:18 Message to Camera, serial 62293 queued 10:47:54 Received message from Master: op=PointingHead serial=62305 10:47:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:47:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:47:54 Point started: ret=0 10:47:54 point_skyscan result=0 10:47:55 Check angles 10:47:55 SkyScan query 10:47:56 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 10:47:56 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 10:47:56 Check angles 10:47:56 SkyScan query 10:47:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:47:56 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:47:56 Message to Master queued w/err=0: serial=62305 error=0 10:48:01 Received message from Master: op=Filter serial=62306 10:48:01 Color wheel filter change from 0 to 0 10:48:01 FLIGetFilterPos err=0 currentPosition=0 10:48:01 FLIGetStepsRemaining err=0 RemainingSteps=0 10:48:01 Filter is already there-color wheel unchanged 10:48:02 Received message from Master: op=Shutter serial=62307 10:48:02 Shutter LASER open 10:48:02 Received message from Camera: op=State serial=62309 10:48:02 GetSingleValue result=40 Value=cccccccc 10:48:02 SkyScan query 10:48:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:48:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:02 Parameters OK 10:48:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:02 Set A/D data flow result=40 10:48:02 Set A/D channel type result=40 10:48:02 Set A/D encoding result=40 10:48:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:02 Set channel filter=0.000000e+000 result=40 10:48:02 Config A/D Result=40 10:48:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:02 Get A/D filter: -9.255963e+061 result=40 10:48:02 Get A/D value=-858993460 result=40 10:48:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:02 Parameters OK 10:48:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:02 Set A/D data flow result=40 10:48:02 Set A/D channel type result=40 10:48:02 Set A/D encoding result=40 10:48:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:02 Set channel filter=0.000000e+000 result=40 10:48:02 Config A/D Result=40 10:48:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:02 Get A/D filter: -9.255963e+061 result=40 10:48:02 Get A/D value=-858993460 result=40 10:48:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:48:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:48:02 Aux= 10:48:02 Message to Camera, serial 62309 queued 10:48:11 Received message from Master: op=Shutter serial=62319 10:48:11 Shutter LASER close 10:48:11 Received message from Master: op=PointingHead serial=62323 10:48:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:48:11 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:48:12 Point started: ret=0 10:48:12 point_skyscan result=0 10:48:12 Check angles 10:48:12 SkyScan query 10:48:13 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.025<-21535 Statuses=0009 0009 10:48:13 Msec=0 True Az=136.155 Ze=-143.025 Az status=0009 Ze status=0009 10:48:13 Check angles 10:48:13 SkyScan query 10:48:14 SkyScan query done: ret=0 az=153.675<-10245 ze=-122.055<-20137 Statuses=0009 0009 10:48:14 Msec=750 True Az=153.675 Ze=-122.055 Az status=0009 Ze status=0009 10:48:14 Check angles 10:48:14 SkyScan query 10:48:15 SkyScan query done: ret=0 az=171.195<-11413 ze=-101.145<-18743 Statuses=0009 0009 10:48:15 Msec=1500 True Az=171.195 Ze=-101.145 Az status=0009 Ze status=0009 10:48:15 Check angles 10:48:15 SkyScan query 10:48:15 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.22<-17348 Statuses=0008 0009 10:48:15 Msec=2250 True Az=176.025 Ze=-80.22 Az status=0008 Ze status=0009 10:48:15 Check angles 10:48:15 SkyScan query 10:48:16 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.755<-15917 Statuses=0008 0009 10:48:16 Msec=3000 True Az=176.01 Ze=-58.755 Az status=0008 Ze status=0009 10:48:16 Check angles 10:48:16 SkyScan query 10:48:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:48:17 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:48:17 Message to Master queued w/err=0: serial=62323 error=0 10:48:22 Received message from Master: op=Filter serial=62324 10:48:22 Color wheel filter change from 0 to 0 10:48:22 FLIGetFilterPos err=0 currentPosition=0 10:48:22 FLIGetStepsRemaining err=0 RemainingSteps=0 10:48:22 Filter is already there-color wheel unchanged 10:48:22 Received message from Master: op=Shutter serial=62325 10:48:22 Shutter LASER close 10:48:22 Received message from Camera: op=State serial=62327 10:48:22 GetSingleValue result=40 Value=cccccccc 10:48:22 SkyScan query 10:48:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:48:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:23 Parameters OK 10:48:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:23 Set A/D data flow result=40 10:48:23 Set A/D channel type result=40 10:48:23 Set A/D encoding result=40 10:48:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:23 Set channel filter=0.000000e+000 result=40 10:48:23 Config A/D Result=40 10:48:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:23 Get A/D filter: -9.255963e+061 result=40 10:48:23 Get A/D value=-858993460 result=40 10:48:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:23 Parameters OK 10:48:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:23 Set A/D data flow result=40 10:48:23 Set A/D channel type result=40 10:48:23 Set A/D encoding result=40 10:48:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:23 Set channel filter=0.000000e+000 result=40 10:48:23 Config A/D Result=40 10:48:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:23 Get A/D filter: -9.255963e+061 result=40 10:48:23 Get A/D value=-858993460 result=40 10:48:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:48:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:48:23 Aux= 10:48:23 Message to Camera, serial 62327 queued 10:49:00 Received message from Master: op=PointingHead serial=62340 10:49:00 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:49:00 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:49:00 Point started: ret=0 10:49:00 point_skyscan result=0 10:49:01 Check angles 10:49:01 SkyScan query 10:49:01 SkyScan query done: ret=0 az=153.165<-10211 ze=-22.005<-13467 Statuses=0009 0009 10:49:01 Msec=0 True Az=153.165 Ze=-22.005 Az status=0009 Ze status=0009 10:49:01 Check angles 10:49:01 SkyScan query 10:49:02 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.615<-12041 Statuses=0009 0009 10:49:02 Msec=750 True Az=135.435 Ze=-0.615 Az status=0009 Ze status=0009 10:49:02 Check angles 10:49:02 SkyScan query 10:49:03 SkyScan query done: ret=0 az=117.405<-7827 ze=20.805<-10613 Statuses=0009 0009 10:49:03 Msec=1500 True Az=117.405 Ze=20.805 Az status=0009 Ze status=0009 10:49:03 Check angles 10:49:03 SkyScan query 10:49:03 SkyScan query done: ret=0 az=100.065<-6671 ze=41.745<-9217 Statuses=0009 0009 10:49:03 Msec=2250 True Az=100.065 Ze=41.745 Az status=0009 Ze status=0009 10:49:04 Check angles 10:49:04 SkyScan query 10:49:04 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 10:49:04 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 10:49:04 Check angles 10:49:04 SkyScan query 10:49:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:49:05 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:49:05 Message to Master queued w/err=0: serial=62340 error=0 10:49:10 Received message from Master: op=Filter serial=62341 10:49:10 Color wheel filter change from 0 to 0 10:49:10 FLIGetFilterPos err=0 currentPosition=0 10:49:10 FLIGetStepsRemaining err=0 RemainingSteps=0 10:49:10 Filter is already there-color wheel unchanged 10:49:10 Received message from Master: op=Shutter serial=62342 10:49:10 Shutter LASER close 10:49:10 Received message from Camera: op=State serial=62344 10:49:10 GetSingleValue result=40 Value=cccccccc 10:49:10 SkyScan query 10:49:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:49:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:11 Parameters OK 10:49:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:11 Set A/D data flow result=40 10:49:11 Set A/D channel type result=40 10:49:11 Set A/D encoding result=40 10:49:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:11 Set channel filter=0.000000e+000 result=40 10:49:11 Config A/D Result=40 10:49:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:11 Get A/D filter: -9.255963e+061 result=40 10:49:11 Get A/D value=-858993460 result=40 10:49:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:11 Parameters OK 10:49:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:11 Set A/D data flow result=40 10:49:11 Set A/D channel type result=40 10:49:11 Set A/D encoding result=40 10:49:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:11 Set channel filter=0.000000e+000 result=40 10:49:11 Config A/D Result=40 10:49:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:11 Get A/D filter: -9.255963e+061 result=40 10:49:11 Get A/D value=-858993460 result=40 10:49:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:49:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:49:11 Aux= 10:49:11 Message to Camera, serial 62344 queued 10:49:48 Received message from Master: op=PointingHead serial=62357 10:49:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:49:48 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:49:48 Point started: ret=0 10:49:48 point_skyscan result=0 10:49:49 Check angles 10:49:49 SkyScan query 10:49:49 SkyScan query done: ret=0 az=109.425<-7295 ze=38.49<-9434 Statuses=0009 0008 10:49:49 Msec=0 True Az=109.425 Ze=38.49 Az status=0009 Ze status=0008 10:49:49 Check angles 10:49:49 SkyScan query 10:49:50 SkyScan query done: ret=0 az=126.87<-8458 ze=38.505<-9433 Statuses=0009 0008 10:49:50 Msec=750 True Az=126.87 Ze=38.505 Az status=0009 Ze status=0008 10:49:50 Check angles 10:49:50 SkyScan query 10:49:51 SkyScan query done: ret=0 az=144.465<-9631 ze=38.505<-9433 Statuses=0009 0008 10:49:51 Msec=1500 True Az=144.465 Ze=38.505 Az status=0009 Ze status=0008 10:49:51 Check angles 10:49:51 SkyScan query 10:49:52 SkyScan query done: ret=0 az=161.88<-10792 ze=38.505<-9433 Statuses=0009 0008 10:49:52 Msec=2250 True Az=161.88 Ze=38.505 Az status=0009 Ze status=0008 10:49:52 Check angles 10:49:52 SkyScan query 10:49:52 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 10:49:52 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 10:49:52 Check angles 10:49:52 SkyScan query 10:49:53 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:49:53 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:49:53 Message to Master queued w/err=0: serial=62357 error=0 10:49:58 Received message from Master: op=Filter serial=62358 10:49:58 Color wheel filter change from 0 to 0 10:49:58 FLIGetFilterPos err=0 currentPosition=0 10:49:58 FLIGetStepsRemaining err=0 RemainingSteps=0 10:49:58 Filter is already there-color wheel unchanged 10:49:58 Received message from Master: op=Shutter serial=62359 10:49:58 Shutter LASER close 10:49:58 Received message from Camera: op=State serial=62361 10:49:58 GetSingleValue result=40 Value=cccccccc 10:49:58 SkyScan query 10:49:59 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:49:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:59 Parameters OK 10:49:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:59 Set A/D data flow result=40 10:49:59 Set A/D channel type result=40 10:49:59 Set A/D encoding result=40 10:49:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:59 Set channel filter=0.000000e+000 result=40 10:49:59 Config A/D Result=40 10:49:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:59 Get A/D filter: -9.255963e+061 result=40 10:49:59 Get A/D value=-858993460 result=40 10:49:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:59 Parameters OK 10:49:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:59 Set A/D data flow result=40 10:49:59 Set A/D channel type result=40 10:49:59 Set A/D encoding result=40 10:49:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:59 Set channel filter=0.000000e+000 result=40 10:49:59 Config A/D Result=40 10:49:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:59 Get A/D filter: -9.255963e+061 result=40 10:49:59 Get A/D value=-858993460 result=40 10:49:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:49:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:49:59 Aux= 10:49:59 Message to Camera, serial 62361 queued 10:50:36 Received message from Master: op=PointingHead serial=62374 10:50:36 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:50:36 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:50:36 Point started: ret=0 10:50:36 point_skyscan result=0 10:50:37 Check angles 10:50:37 SkyScan query 10:50:37 SkyScan query done: ret=0 az=152.985<-10199 ze=8.745<-11417 Statuses=0009 0009 10:50:37 Msec=0 True Az=152.985 Ze=8.745 Az status=0009 Ze status=0009 10:50:38 Check angles 10:50:38 SkyScan query 10:50:38 SkyScan query done: ret=0 az=135.51<-9034 ze=-12.24<-12816 Statuses=0009 0009 10:50:38 Msec=750 True Az=135.51 Ze=-12.24 Az status=0009 Ze status=0009 10:50:38 Check angles 10:50:38 SkyScan query 10:50:39 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.165<-14211 Statuses=0009 0009 10:50:39 Msec=1500 True Az=118.02 Ze=-33.165 Az status=0009 Ze status=0009 10:50:39 Check angles 10:50:39 SkyScan query 10:50:40 SkyScan query done: ret=0 az=100.5<-6700 ze=-51.525<-15435 Statuses=0009 0009 10:50:40 Msec=2250 True Az=100.5 Ze=-51.525 Az status=0009 Ze status=0009 10:50:40 Check angles 10:50:40 SkyScan query 10:50:40 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 10:50:40 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 10:50:41 Check angles 10:50:41 SkyScan query 10:50:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:50:41 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:50:41 Message to Master queued w/err=0: serial=62374 error=0 10:50:46 Received message from Master: op=Filter serial=62375 10:50:46 Color wheel filter change from 0 to 0 10:50:46 FLIGetFilterPos err=0 currentPosition=0 10:50:46 FLIGetStepsRemaining err=0 RemainingSteps=0 10:50:46 Filter is already there-color wheel unchanged 10:50:46 Received message from Master: op=Shutter serial=62376 10:50:46 Shutter LASER close 10:50:46 Received message from Camera: op=State serial=62378 10:50:46 GetSingleValue result=40 Value=cccccccc 10:50:46 SkyScan query 10:50:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:50:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:47 Parameters OK 10:50:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:47 Set A/D data flow result=40 10:50:47 Set A/D channel type result=40 10:50:47 Set A/D encoding result=40 10:50:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:47 Set channel filter=0.000000e+000 result=40 10:50:47 Config A/D Result=40 10:50:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:47 Get A/D filter: -9.255963e+061 result=40 10:50:47 Get A/D value=-858993460 result=40 10:50:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:47 Parameters OK 10:50:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:47 Set A/D data flow result=40 10:50:47 Set A/D channel type result=40 10:50:47 Set A/D encoding result=40 10:50:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:47 Set channel filter=0.000000e+000 result=40 10:50:47 Config A/D Result=40 10:50:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:47 Get A/D filter: -9.255963e+061 result=40 10:50:47 Get A/D value=-858993460 result=40 10:50:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:50:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:50:47 Aux= 10:50:47 Message to Camera, serial 62378 queued 10:51:24 Received message from Master: op=PointingHead serial=62391 10:51:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:51:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:51:24 Point started: ret=0 10:51:24 point_skyscan result=0 10:51:25 Check angles 10:51:25 SkyScan query 10:51:25 SkyScan query done: ret=0 az=108.84<-7256 ze=-81.105<-17407 Statuses=0009 0009 10:51:25 Msec=0 True Az=108.84 Ze=-81.105 Az status=0009 Ze status=0009 10:51:26 Check angles 10:51:26 SkyScan query 10:51:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.045<-18803 Statuses=0008 0009 10:51:26 Msec=750 True Az=112.995 Ze=-102.045 Az status=0008 Ze status=0009 10:51:26 Check angles 10:51:26 SkyScan query 10:51:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-123<-20200 Statuses=0008 0009 10:51:27 Msec=1500 True Az=112.995 Ze=-123 Az status=0008 Ze status=0009 10:51:27 Check angles 10:51:27 SkyScan query 10:51:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.97<-21598 Statuses=0008 0009 10:51:28 Msec=2250 True Az=112.995 Ze=-143.97 Az status=0008 Ze status=0009 10:51:28 Check angles 10:51:28 SkyScan query 10:51:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.91<-22994 Statuses=0008 0009 10:51:28 Msec=3000 True Az=112.995 Ze=-164.91 Az status=0008 Ze status=0009 10:51:29 Check angles 10:51:29 SkyScan query 10:51:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:51:29 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:51:29 Message to Master queued w/err=0: serial=62391 error=0 10:51:34 Received message from Master: op=Filter serial=62392 10:51:34 Color wheel filter change from 0 to 0 10:51:34 FLIGetFilterPos err=0 currentPosition=0 10:51:34 FLIGetStepsRemaining err=0 RemainingSteps=0 10:51:34 Filter is already there-color wheel unchanged 10:51:34 Received message from Master: op=Shutter serial=62393 10:51:34 Shutter LASER open 10:51:35 Received message from Camera: op=State serial=62395 10:51:35 GetSingleValue result=40 Value=cccccccc 10:51:35 SkyScan query 10:51:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:51:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:35 Parameters OK 10:51:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:35 Set A/D data flow result=40 10:51:35 Set A/D channel type result=40 10:51:35 Set A/D encoding result=40 10:51:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:35 Set channel filter=0.000000e+000 result=40 10:51:35 Config A/D Result=40 10:51:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:35 Get A/D filter: -9.255963e+061 result=40 10:51:35 Get A/D value=-858993460 result=40 10:51:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:35 Parameters OK 10:51:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:35 Set A/D data flow result=40 10:51:35 Set A/D channel type result=40 10:51:35 Set A/D encoding result=40 10:51:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:35 Set channel filter=0.000000e+000 result=40 10:51:35 Config A/D Result=40 10:51:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:35 Get A/D filter: -9.255963e+061 result=40 10:51:35 Get A/D value=-858993460 result=40 10:51:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:51:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:51:35 Aux= 10:51:35 Message to Camera, serial 62395 queued 10:51:44 Received message from Master: op=Shutter serial=62405 10:51:44 Shutter LASER close 10:51:44 Received message from Master: op=PointingHead serial=62409 10:51:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:51:44 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:51:44 Point started: ret=0 10:51:44 point_skyscan result=0 10:51:45 Check angles 10:51:45 SkyScan query 10:51:46 SkyScan query done: ret=0 az=89.895<-5993 ze=157.305<-1513 Statuses=0009 0009 10:51:46 Msec=0 True Az=89.895 Ze=157.305 Az status=0009 Ze status=0009 10:51:46 Check angles 10:51:46 SkyScan query 10:51:46 SkyScan query done: ret=0 az=72.465<-4831 ze=136.32<-2912 Statuses=0009 0009 10:51:46 Msec=750 True Az=72.465 Ze=136.32 Az status=0009 Ze status=0009 10:51:47 Check angles 10:51:47 SkyScan query 10:51:47 SkyScan query done: ret=0 az=54.825<-3655 ze=114.96<-4336 Statuses=0009 0009 10:51:47 Msec=1500 True Az=54.825 Ze=114.96 Az status=0009 Ze status=0009 10:51:47 Check angles 10:51:47 SkyScan query 10:51:48 SkyScan query done: ret=0 az=40.95<-2730 ze=93.57<-5762 Statuses=0009 0009 10:51:48 Msec=2250 True Az=40.95 Ze=93.57 Az status=0009 Ze status=0009 10:51:48 Check angles 10:51:48 SkyScan query 10:51:49 SkyScan query done: ret=0 az=40.995<-2733 ze=72.585<-7161 Statuses=0008 0009 10:51:49 Msec=3000 True Az=40.995 Ze=72.585 Az status=0008 Ze status=0009 10:51:49 Check angles 10:51:49 SkyScan query 10:51:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.335<-8511 Statuses=0008 0009 10:51:50 Msec=3750 True Az=40.995 Ze=52.335 Az status=0008 Ze status=0009 10:51:50 Check angles 10:51:50 SkyScan query 10:51:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:51:50 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:51:50 Message to Master queued w/err=0: serial=62409 error=0 10:51:55 Received message from Master: op=Filter serial=62410 10:51:55 Color wheel filter change from 0 to 0 10:51:55 FLIGetFilterPos err=0 currentPosition=0 10:51:55 FLIGetStepsRemaining err=0 RemainingSteps=0 10:51:55 Filter is already there-color wheel unchanged 10:51:55 Received message from Master: op=Shutter serial=62411 10:51:55 Shutter LASER close 10:51:56 Received message from Camera: op=State serial=62413 10:51:56 GetSingleValue result=40 Value=cccccccc 10:51:56 SkyScan query 10:51:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:51:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:56 Parameters OK 10:51:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:56 Set A/D data flow result=40 10:51:56 Set A/D channel type result=40 10:51:56 Set A/D encoding result=40 10:51:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:56 Set channel filter=0.000000e+000 result=40 10:51:56 Config A/D Result=40 10:51:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:56 Get A/D filter: -9.255963e+061 result=40 10:51:56 Get A/D value=-858993460 result=40 10:51:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:56 Parameters OK 10:51:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:56 Set A/D data flow result=40 10:51:56 Set A/D channel type result=40 10:51:56 Set A/D encoding result=40 10:51:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:56 Set channel filter=0.000000e+000 result=40 10:51:56 Config A/D Result=40 10:51:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:56 Get A/D filter: -9.255963e+061 result=40 10:51:56 Get A/D value=-858993460 result=40 10:51:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:51:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:51:56 Aux= 10:51:56 Message to Camera, serial 62413 queued 10:52:33 Received message from Master: op=PointingHead serial=62426 10:52:33 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:52:33 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:52:33 Point started: ret=0 10:52:33 point_skyscan result=0 10:52:34 Check angles 10:52:34 SkyScan query 10:52:35 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 10:52:35 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 10:52:35 Check angles 10:52:35 SkyScan query 10:52:35 SkyScan query done: ret=0 az=81.315<-5421 ze=66.51<-7566 Statuses=0009 0008 10:52:35 Msec=750 True Az=81.315 Ze=66.51 Az status=0009 Ze status=0008 10:52:36 Check angles 10:52:36 SkyScan query 10:52:36 SkyScan query done: ret=0 az=98.94<-6596 ze=66.495<-7567 Statuses=0009 0008 10:52:36 Msec=1500 True Az=98.94 Ze=66.495 Az status=0009 Ze status=0008 10:52:36 Check angles 10:52:36 SkyScan query 10:52:37 SkyScan query done: ret=0 az=116.475<-7765 ze=66.495<-7567 Statuses=0009 0008 10:52:37 Msec=2250 True Az=116.475 Ze=66.495 Az status=0009 Ze status=0008 10:52:37 Check angles 10:52:37 SkyScan query 10:52:38 SkyScan query done: ret=0 az=134.025<-8935 ze=66.495<-7567 Statuses=0009 0008 10:52:38 Msec=3000 True Az=134.025 Ze=66.495 Az status=0009 Ze status=0008 10:52:38 Check angles 10:52:38 SkyScan query 10:52:38 SkyScan query done: ret=0 az=151.41<-10094 ze=66.495<-7567 Statuses=0009 0008 10:52:38 Msec=3750 True Az=151.41 Ze=66.495 Az status=0009 Ze status=0008 10:52:39 Check angles 10:52:39 SkyScan query 10:52:39 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:52:39 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 10:52:39 Message to Master queued w/err=0: serial=62426 error=0 10:52:44 Received message from Master: op=Filter serial=62427 10:52:44 Color wheel filter change from 0 to 0 10:52:44 FLIGetFilterPos err=0 currentPosition=0 10:52:44 FLIGetStepsRemaining err=0 RemainingSteps=0 10:52:44 Filter is already there-color wheel unchanged 10:52:44 Received message from Master: op=Shutter serial=62428 10:52:44 Shutter LASER close 10:52:44 Received message from Camera: op=State serial=62430 10:52:44 GetSingleValue result=40 Value=cccccccc 10:52:44 SkyScan query 10:52:45 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:52:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:45 Parameters OK 10:52:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:45 Set A/D data flow result=40 10:52:45 Set A/D channel type result=40 10:52:45 Set A/D encoding result=40 10:52:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:45 Set channel filter=0.000000e+000 result=40 10:52:45 Config A/D Result=40 10:52:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:45 Get A/D filter: -9.255963e+061 result=40 10:52:45 Get A/D value=-858993460 result=40 10:52:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:45 Parameters OK 10:52:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:45 Set A/D data flow result=40 10:52:45 Set A/D channel type result=40 10:52:45 Set A/D encoding result=40 10:52:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:45 Set channel filter=0.000000e+000 result=40 10:52:45 Config A/D Result=40 10:52:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:45 Get A/D filter: -9.255963e+061 result=40 10:52:45 Get A/D value=-858993460 result=40 10:52:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:45 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:52:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:52:45 Aux= 10:52:45 Message to Camera, serial 62430 queued 10:53:22 Received message from Master: op=PointingHead serial=62443 10:53:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:53:22 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:53:22 Point started: ret=0 10:53:22 point_skyscan result=0 10:53:23 Check angles 10:53:23 SkyScan query 10:53:23 SkyScan query done: ret=0 az=134.82<-8988 ze=36.6<-9560 Statuses=0009 0009 10:53:23 Msec=0 True Az=134.82 Ze=36.6 Az status=0009 Ze status=0009 10:53:24 Check angles 10:53:24 SkyScan query 10:53:24 SkyScan query done: ret=0 az=117.45<-7830 ze=15.705<-10953 Statuses=0009 0009 10:53:24 Msec=750 True Az=117.45 Ze=15.705 Az status=0009 Ze status=0009 10:53:24 Check angles 10:53:24 SkyScan query 10:53:25 SkyScan query done: ret=0 az=99.69<-6646 ze=-5.73<-12382 Statuses=0009 0009 10:53:25 Msec=1500 True Az=99.69 Ze=-5.73 Az status=0009 Ze status=0009 10:53:25 Check angles 10:53:25 SkyScan query 10:53:26 SkyScan query done: ret=0 az=82.23<-5482 ze=-26.67<-13778 Statuses=0009 0009 10:53:26 Msec=2250 True Az=82.23 Ze=-26.67 Az status=0009 Ze status=0009 10:53:26 Check angles 10:53:26 SkyScan query 10:53:26 SkyScan query done: ret=0 az=64.68<-4312 ze=-38.58<-14572 Statuses=0009 0008 10:53:26 Msec=3000 True Az=64.68 Ze=-38.58 Az status=0009 Ze status=0008 10:53:27 Check angles 10:53:27 SkyScan query 10:53:27 SkyScan query done: ret=0 az=46.965<-3131 ze=-38.52<-14568 Statuses=0009 0008 10:53:27 Msec=3750 True Az=46.965 Ze=-38.52 Az status=0009 Ze status=0008 10:53:27 Check angles 10:53:27 SkyScan query 10:53:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:53:28 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:53:28 Message to Master queued w/err=0: serial=62443 error=0 10:53:33 Received message from Master: op=Filter serial=62444 10:53:33 Color wheel filter change from 0 to 0 10:53:33 FLIGetFilterPos err=0 currentPosition=0 10:53:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:53:33 Filter is already there-color wheel unchanged 10:53:33 Received message from Master: op=Shutter serial=62445 10:53:33 Shutter LASER close 10:53:33 Received message from Camera: op=State serial=62447 10:53:33 GetSingleValue result=40 Value=cccccccc 10:53:33 SkyScan query 10:53:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:53:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:34 Parameters OK 10:53:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:34 Set A/D data flow result=40 10:53:34 Set A/D channel type result=40 10:53:34 Set A/D encoding result=40 10:53:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:34 Set channel filter=0.000000e+000 result=40 10:53:34 Config A/D Result=40 10:53:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:34 Get A/D filter: -9.255963e+061 result=40 10:53:34 Get A/D value=-858993460 result=40 10:53:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:34 Parameters OK 10:53:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:34 Set A/D data flow result=40 10:53:34 Set A/D channel type result=40 10:53:34 Set A/D encoding result=40 10:53:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:34 Set channel filter=0.000000e+000 result=40 10:53:34 Config A/D Result=40 10:53:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:34 Get A/D filter: -9.255963e+061 result=40 10:53:34 Get A/D value=-858993460 result=40 10:53:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:53:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:53:34 Aux= 10:53:34 Message to Camera, serial 62447 queued 10:54:11 Received message from Master: op=PointingHead serial=62460 10:54:11 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:54:11 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:54:11 Point started: ret=0 10:54:11 point_skyscan result=0 10:54:12 Check angles 10:54:12 SkyScan query 10:54:12 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.775<-16585 Statuses=0009 0009 10:54:12 Msec=0 True Az=64.425 Ze=-68.775 Az status=0009 Ze status=0009 10:54:13 Check angles 10:54:13 SkyScan query 10:54:13 SkyScan query done: ret=0 az=82.245<-5483 ze=-90.165<-18011 Statuses=0009 0009 10:54:13 Msec=750 True Az=82.245 Ze=-90.165 Az status=0009 Ze status=0009 10:54:13 Check angles 10:54:13 SkyScan query 10:54:14 SkyScan query done: ret=0 az=99.78<-6652 ze=-111.135<-19409 Statuses=0009 0009 10:54:14 Msec=1500 True Az=99.78 Ze=-111.135 Az status=0009 Ze status=0009 10:54:14 Check angles 10:54:14 SkyScan query 10:54:15 SkyScan query done: ret=0 az=117.6<-7840 ze=-132.465<-20831 Statuses=0009 0009 10:54:15 Msec=2250 True Az=117.6 Ze=-132.465 Az status=0009 Ze status=0009 10:54:15 Check angles 10:54:15 SkyScan query 10:54:15 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.54<-21436 Statuses=0009 0008 10:54:15 Msec=3000 True Az=130.965 Ze=-141.54 Az status=0009 Ze status=0008 10:54:16 Check angles 10:54:16 SkyScan query 10:54:16 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 10:54:16 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 10:54:16 Message to Master queued w/err=0: serial=62460 error=0 10:54:21 Received message from Master: op=Filter serial=62461 10:54:21 Color wheel filter change from 0 to 0 10:54:21 FLIGetFilterPos err=0 currentPosition=0 10:54:21 FLIGetStepsRemaining err=0 RemainingSteps=0 10:54:21 Filter is already there-color wheel unchanged 10:54:21 Received message from Master: op=Shutter serial=62462 10:54:21 Shutter LASER close 10:54:21 Received message from Camera: op=State serial=62464 10:54:21 GetSingleValue result=40 Value=cccccccc 10:54:21 SkyScan query 10:54:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:54:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:22 Parameters OK 10:54:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:22 Set A/D data flow result=40 10:54:22 Set A/D channel type result=40 10:54:22 Set A/D encoding result=40 10:54:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:22 Set channel filter=0.000000e+000 result=40 10:54:22 Config A/D Result=40 10:54:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:22 Get A/D filter: -9.255963e+061 result=40 10:54:22 Get A/D value=-858993460 result=40 10:54:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:22 Parameters OK 10:54:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:22 Set A/D data flow result=40 10:54:22 Set A/D channel type result=40 10:54:22 Set A/D encoding result=40 10:54:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:22 Set channel filter=0.000000e+000 result=40 10:54:22 Config A/D Result=40 10:54:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:22 Get A/D filter: -9.255963e+061 result=40 10:54:22 Get A/D value=-858993460 result=40 10:54:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:22 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:54:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:54:22 Aux= 10:54:22 Message to Camera, serial 62464 queued 10:54:59 Received message from Master: op=PointingHead serial=62477 10:54:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:54:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:54:59 Point started: ret=0 10:54:59 point_skyscan result=0 10:55:00 Check angles 10:55:00 SkyScan query 10:55:00 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 10:55:00 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 10:55:01 Check angles 10:55:01 SkyScan query 10:55:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:55:01 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:55:01 Message to Master queued w/err=0: serial=62477 error=0 10:55:06 Received message from Master: op=Filter serial=62478 10:55:06 Color wheel filter change from 0 to 0 10:55:06 FLIGetFilterPos err=0 currentPosition=0 10:55:06 FLIGetStepsRemaining err=0 RemainingSteps=0 10:55:06 Filter is already there-color wheel unchanged 10:55:06 Received message from Master: op=Shutter serial=62479 10:55:06 Shutter LASER open 10:55:07 Received message from Camera: op=State serial=62481 10:55:07 GetSingleValue result=40 Value=cccccccc 10:55:07 SkyScan query 10:55:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:55:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:07 Parameters OK 10:55:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:07 Set A/D data flow result=40 10:55:07 Set A/D channel type result=40 10:55:07 Set A/D encoding result=40 10:55:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:07 Set channel filter=0.000000e+000 result=40 10:55:07 Config A/D Result=40 10:55:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:07 Get A/D filter: -9.255963e+061 result=40 10:55:07 Get A/D value=-858993460 result=40 10:55:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:07 Parameters OK 10:55:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:07 Set A/D data flow result=40 10:55:07 Set A/D channel type result=40 10:55:07 Set A/D encoding result=40 10:55:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:07 Set channel filter=0.000000e+000 result=40 10:55:07 Config A/D Result=40 10:55:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:07 Get A/D filter: -9.255963e+061 result=40 10:55:07 Get A/D value=-858993460 result=40 10:55:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:55:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:55:07 Aux= 10:55:07 Message to Camera, serial 62481 queued 10:55:16 Received message from Master: op=Shutter serial=62491 10:55:16 Shutter LASER close 10:55:16 Received message from Master: op=PointingHead serial=62495 10:55:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:55:16 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:55:16 Point started: ret=0 10:55:16 point_skyscan result=0 10:55:17 Check angles 10:55:17 SkyScan query 10:55:18 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.055<-21537 Statuses=0009 0009 10:55:18 Msec=0 True Az=136.155 Ze=-143.055 Az status=0009 Ze status=0009 10:55:18 Check angles 10:55:18 SkyScan query 10:55:19 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.07<-20138 Statuses=0009 0009 10:55:19 Msec=750 True Az=153.57 Ze=-122.07 Az status=0009 Ze status=0009 10:55:19 Check angles 10:55:19 SkyScan query 10:55:19 SkyScan query done: ret=0 az=171.075<-11405 ze=-101.175<-18745 Statuses=0009 0009 10:55:19 Msec=1500 True Az=171.075 Ze=-101.175 Az status=0009 Ze status=0009 10:55:19 Check angles 10:55:19 SkyScan query 10:55:20 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.235<-17349 Statuses=0008 0009 10:55:20 Msec=2250 True Az=176.025 Ze=-80.235 Az status=0008 Ze status=0009 10:55:20 Check angles 10:55:20 SkyScan query 10:55:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.265<-15951 Statuses=0008 0009 10:55:21 Msec=3000 True Az=175.995 Ze=-59.265 Az status=0008 Ze status=0009 10:55:21 Check angles 10:55:21 SkyScan query 10:55:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:55:22 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:55:22 Message to Master queued w/err=0: serial=62495 error=0 10:55:27 Received message from Master: op=Filter serial=62496 10:55:27 Color wheel filter change from 0 to 0 10:55:27 FLIGetFilterPos err=0 currentPosition=0 10:55:27 FLIGetStepsRemaining err=0 RemainingSteps=0 10:55:27 Filter is already there-color wheel unchanged 10:55:27 Received message from Master: op=Shutter serial=62497 10:55:27 Shutter LASER close 10:55:27 Received message from Camera: op=State serial=62499 10:55:27 GetSingleValue result=40 Value=cccccccc 10:55:27 SkyScan query 10:55:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:55:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:27 Parameters OK 10:55:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:27 Set A/D data flow result=40 10:55:27 Set A/D channel type result=40 10:55:27 Set A/D encoding result=40 10:55:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:27 Set channel filter=0.000000e+000 result=40 10:55:27 Config A/D Result=40 10:55:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:27 Get A/D filter: -9.255963e+061 result=40 10:55:27 Get A/D value=-858993460 result=40 10:55:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:27 Parameters OK 10:55:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:27 Set A/D data flow result=40 10:55:27 Set A/D channel type result=40 10:55:27 Set A/D encoding result=40 10:55:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:27 Set channel filter=0.000000e+000 result=40 10:55:27 Config A/D Result=40 10:55:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:27 Get A/D filter: -9.255963e+061 result=40 10:55:27 Get A/D value=-858993460 result=40 10:55:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:55:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:55:27 Aux= 10:55:27 Message to Camera, serial 62499 queued [UTC 2018-12-11 10:55:54] 10:56:04 Received message from Master: op=PointingHead serial=62512 10:56:04 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:56:04 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:56:05 Point started: ret=0 10:56:05 point_skyscan result=0 10:56:05 Check angles 10:56:05 SkyScan query 10:56:06 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.66<-13444 Statuses=0009 0009 10:56:06 Msec=0 True Az=152.925 Ze=-21.66 Az status=0009 Ze status=0009 10:56:06 Check angles 10:56:06 SkyScan query 10:56:07 SkyScan query done: ret=0 az=135.51<-9034 ze=-0.705<-12047 Statuses=0009 0009 10:56:07 Msec=750 True Az=135.51 Ze=-0.705 Az status=0009 Ze status=0009 10:56:07 Check angles 10:56:07 SkyScan query 10:56:07 SkyScan query done: ret=0 az=117.495<-7833 ze=20.685<-10621 Statuses=0009 0009 10:56:07 Msec=1500 True Az=117.495 Ze=20.685 Az status=0009 Ze status=0009 10:56:08 Check angles 10:56:08 SkyScan query 10:56:08 SkyScan query done: ret=0 az=100.095<-6673 ze=41.655<-9223 Statuses=0009 0009 10:56:08 Msec=2250 True Az=100.095 Ze=41.655 Az status=0009 Ze status=0009 10:56:08 Check angles 10:56:08 SkyScan query 10:56:09 SkyScan query done: ret=0 az=86.07<-5738 ze=51.54<-8564 Statuses=0009 0008 10:56:09 Msec=3000 True Az=86.07 Ze=51.54 Az status=0009 Ze status=0008 10:56:09 Check angles 10:56:09 SkyScan query 10:56:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:56:10 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:56:10 Message to Master queued w/err=0: serial=62512 error=0 10:56:15 Received message from Master: op=Filter serial=62513 10:56:15 Color wheel filter change from 0 to 0 10:56:15 FLIGetFilterPos err=0 currentPosition=0 10:56:15 FLIGetStepsRemaining err=0 RemainingSteps=0 10:56:15 Filter is already there-color wheel unchanged 10:56:15 Received message from Master: op=Shutter serial=62514 10:56:15 Shutter LASER close 10:56:15 Received message from Camera: op=State serial=62516 10:56:15 GetSingleValue result=40 Value=cccccccc 10:56:15 SkyScan query 10:56:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:56:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:16 Parameters OK 10:56:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:16 Set A/D data flow result=40 10:56:16 Set A/D channel type result=40 10:56:16 Set A/D encoding result=40 10:56:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:16 Set channel filter=0.000000e+000 result=40 10:56:16 Config A/D Result=40 10:56:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:16 Get A/D filter: -9.255963e+061 result=40 10:56:16 Get A/D value=-858993460 result=40 10:56:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:16 Parameters OK 10:56:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:16 Set A/D data flow result=40 10:56:16 Set A/D channel type result=40 10:56:16 Set A/D encoding result=40 10:56:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:16 Set channel filter=0.000000e+000 result=40 10:56:16 Config A/D Result=40 10:56:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:16 Get A/D filter: -9.255963e+061 result=40 10:56:16 Get A/D value=-858993460 result=40 10:56:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:56:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:56:16 Aux= 10:56:16 Message to Camera, serial 62516 queued 10:56:51 Received message from Master: op=PointingHead serial=62528 10:56:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:56:51 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:56:52 Point started: ret=0 10:56:52 point_skyscan result=0 10:56:53 Check angles 10:56:53 SkyScan query 10:56:53 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 10:56:53 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 10:56:53 Check angles 10:56:53 SkyScan query 10:56:54 SkyScan query done: ret=0 az=126.93<-8462 ze=38.505<-9433 Statuses=0009 0008 10:56:54 Msec=750 True Az=126.93 Ze=38.505 Az status=0009 Ze status=0008 10:56:54 Check angles 10:56:54 SkyScan query 10:56:55 SkyScan query done: ret=0 az=144.555<-9637 ze=38.505<-9433 Statuses=0009 0008 10:56:55 Msec=1500 True Az=144.555 Ze=38.505 Az status=0009 Ze status=0008 10:56:55 Check angles 10:56:55 SkyScan query 10:56:55 SkyScan query done: ret=0 az=161.82<-10788 ze=38.505<-9433 Statuses=0009 0008 10:56:55 Msec=2250 True Az=161.82 Ze=38.505 Az status=0009 Ze status=0008 10:56:56 Check angles 10:56:56 SkyScan query 10:56:56 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:56:56 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:56:56 Check angles 10:56:56 SkyScan query 10:56:57 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:56:57 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:56:57 Message to Master queued w/err=0: serial=62528 error=0 10:57:02 Received message from Master: op=Filter serial=62529 10:57:02 Color wheel filter change from 0 to 0 10:57:02 FLIGetFilterPos err=0 currentPosition=0 10:57:02 FLIGetStepsRemaining err=0 RemainingSteps=0 10:57:02 Filter is already there-color wheel unchanged 10:57:02 Received message from Master: op=Shutter serial=62530 10:57:02 Shutter LASER close 10:57:02 Received message from Camera: op=State serial=62532 10:57:02 GetSingleValue result=40 Value=cccccccc 10:57:02 SkyScan query 10:57:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:57:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:03 Parameters OK 10:57:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:03 Set A/D data flow result=40 10:57:03 Set A/D channel type result=40 10:57:03 Set A/D encoding result=40 10:57:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:03 Set channel filter=0.000000e+000 result=40 10:57:03 Config A/D Result=40 10:57:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:03 Get A/D filter: -9.255963e+061 result=40 10:57:03 Get A/D value=-858993460 result=40 10:57:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:03 Parameters OK 10:57:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:03 Set A/D data flow result=40 10:57:03 Set A/D channel type result=40 10:57:03 Set A/D encoding result=40 10:57:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:03 Set channel filter=0.000000e+000 result=40 10:57:03 Config A/D Result=40 10:57:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:03 Get A/D filter: -9.255963e+061 result=40 10:57:03 Get A/D value=-858993460 result=40 10:57:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:57:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:57:03 Aux= 10:57:03 Message to Camera, serial 62532 queued 10:57:40 Received message from Master: op=PointingHead serial=62545 10:57:40 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:57:40 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:57:40 Point started: ret=0 10:57:40 point_skyscan result=0 10:57:41 Check angles 10:57:41 SkyScan query 10:57:41 SkyScan query done: ret=0 az=153.195<-10213 ze=8.88<-11408 Statuses=0009 0009 10:57:41 Msec=0 True Az=153.195 Ze=8.88 Az status=0009 Ze status=0009 10:57:41 Check angles 10:57:41 SkyScan query 10:57:42 SkyScan query done: ret=0 az=135.45<-9030 ze=-12.495<-12833 Statuses=0009 0009 10:57:42 Msec=750 True Az=135.45 Ze=-12.495 Az status=0009 Ze status=0009 10:57:42 Check angles 10:57:42 SkyScan query 10:57:43 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.42<-14228 Statuses=0009 0009 10:57:43 Msec=1500 True Az=117.765 Ze=-33.42 Az status=0009 Ze status=0009 10:57:43 Check angles 10:57:43 SkyScan query 10:57:44 SkyScan query done: ret=0 az=100.35<-6690 ze=-51.54<-15436 Statuses=0009 0009 10:57:44 Msec=2250 True Az=100.35 Ze=-51.54 Az status=0009 Ze status=0009 10:57:44 Check angles 10:57:44 SkyScan query 10:57:44 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 10:57:44 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 10:57:44 Check angles 10:57:44 SkyScan query 10:57:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:57:45 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:57:45 Message to Master queued w/err=0: serial=62545 error=0 10:57:50 Received message from Master: op=Filter serial=62546 10:57:50 Color wheel filter change from 0 to 0 10:57:50 FLIGetFilterPos err=0 currentPosition=0 10:57:50 FLIGetStepsRemaining err=0 RemainingSteps=0 10:57:50 Filter is already there-color wheel unchanged 10:57:50 Received message from Master: op=Shutter serial=62547 10:57:50 Shutter LASER close 10:57:50 Received message from Camera: op=State serial=62549 10:57:50 GetSingleValue result=40 Value=cccccccc 10:57:50 SkyScan query 10:57:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:57:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:51 Parameters OK 10:57:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:51 Set A/D data flow result=40 10:57:51 Set A/D channel type result=40 10:57:51 Set A/D encoding result=40 10:57:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:51 Set channel filter=0.000000e+000 result=40 10:57:51 Config A/D Result=40 10:57:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:51 Get A/D filter: -9.255963e+061 result=40 10:57:51 Get A/D value=-858993460 result=40 10:57:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:51 Parameters OK 10:57:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:51 Set A/D data flow result=40 10:57:51 Set A/D channel type result=40 10:57:51 Set A/D encoding result=40 10:57:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:51 Set channel filter=0.000000e+000 result=40 10:57:51 Config A/D Result=40 10:57:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:51 Get A/D filter: -9.255963e+061 result=40 10:57:51 Get A/D value=-858993460 result=40 10:57:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:57:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:57:51 Aux= 10:57:51 Message to Camera, serial 62549 queued 10:58:28 Received message from Master: op=PointingHead serial=62562 10:58:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:58:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:58:28 Point started: ret=0 10:58:28 point_skyscan result=0 10:58:29 Check angles 10:58:29 SkyScan query 10:58:29 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.69<-17446 Statuses=0009 0009 10:58:29 Msec=0 True Az=109.395 Ze=-81.69 Az status=0009 Ze status=0009 10:58:30 Check angles 10:58:30 SkyScan query 10:58:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.63<-18842 Statuses=0008 0009 10:58:30 Msec=750 True Az=112.995 Ze=-102.63 Az status=0008 Ze status=0009 10:58:30 Check angles 10:58:30 SkyScan query 10:58:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.6<-20240 Statuses=0008 0009 10:58:31 Msec=1500 True Az=112.995 Ze=-123.6 Az status=0008 Ze status=0009 10:58:31 Check angles 10:58:31 SkyScan query 10:58:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.54<-21636 Statuses=0008 0009 10:58:32 Msec=2250 True Az=112.995 Ze=-144.54 Az status=0008 Ze status=0009 10:58:32 Check angles 10:58:32 SkyScan query 10:58:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.51<-23034 Statuses=0008 0009 10:58:32 Msec=3000 True Az=112.995 Ze=-165.51 Az status=0008 Ze status=0009 10:58:33 Check angles 10:58:33 SkyScan query 10:58:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:58:33 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:58:33 Message to Master queued w/err=0: serial=62562 error=0 10:58:38 Received message from Master: op=Filter serial=62563 10:58:38 Color wheel filter change from 0 to 0 10:58:38 FLIGetFilterPos err=0 currentPosition=0 10:58:38 FLIGetStepsRemaining err=0 RemainingSteps=0 10:58:38 Filter is already there-color wheel unchanged 10:58:38 Received message from Master: op=Shutter serial=62564 10:58:38 Shutter LASER open 10:58:38 Received message from Camera: op=State serial=62566 10:58:38 GetSingleValue result=40 Value=cccccccc 10:58:38 SkyScan query 10:58:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:58:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:39 Parameters OK 10:58:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:39 Set A/D data flow result=40 10:58:39 Set A/D channel type result=40 10:58:39 Set A/D encoding result=40 10:58:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:39 Set channel filter=0.000000e+000 result=40 10:58:39 Config A/D Result=40 10:58:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:39 Get A/D filter: -9.255963e+061 result=40 10:58:39 Get A/D value=-858993460 result=40 10:58:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:39 Parameters OK 10:58:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:39 Set A/D data flow result=40 10:58:39 Set A/D channel type result=40 10:58:39 Set A/D encoding result=40 10:58:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:39 Set channel filter=0.000000e+000 result=40 10:58:39 Config A/D Result=40 10:58:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:39 Get A/D filter: -9.255963e+061 result=40 10:58:39 Get A/D value=-858993460 result=40 10:58:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:58:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:58:39 Aux= 10:58:39 Message to Camera, serial 62566 queued 10:58:47 Received message from Master: op=Shutter serial=62576 10:58:47 Shutter LASER close 10:58:48 Received message from Master: op=PointingHead serial=62580 10:58:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:58:48 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:58:48 Point started: ret=0 10:58:48 point_skyscan result=0 10:58:49 Check angles 10:58:49 SkyScan query 10:58:50 SkyScan query done: ret=0 az=89.835<-5989 ze=157.17<-1522 Statuses=0009 0009 10:58:50 Msec=0 True Az=89.835 Ze=157.17 Az status=0009 Ze status=0009 10:58:50 Check angles 10:58:50 SkyScan query 10:58:50 SkyScan query done: ret=0 az=72.3<-4820 ze=136.215<-2919 Statuses=0009 0009 10:58:50 Msec=750 True Az=72.3 Ze=136.215 Az status=0009 Ze status=0009 10:58:50 Check angles 10:58:50 SkyScan query 10:58:51 SkyScan query done: ret=0 az=54.72<-3648 ze=114.84<-4344 Statuses=0009 0009 10:58:51 Msec=1500 True Az=54.72 Ze=114.84 Az status=0009 Ze status=0009 10:58:51 Check angles 10:58:51 SkyScan query 10:58:52 SkyScan query done: ret=0 az=40.965<-2731 ze=93.45<-5770 Statuses=0009 0009 10:58:52 Msec=2250 True Az=40.965 Ze=93.45 Az status=0009 Ze status=0009 10:58:52 Check angles 10:58:52 SkyScan query 10:58:53 SkyScan query done: ret=0 az=40.995<-2733 ze=72.465<-7169 Statuses=0008 0009 10:58:53 Msec=3000 True Az=40.995 Ze=72.465 Az status=0008 Ze status=0009 10:58:53 Check angles 10:58:53 SkyScan query 10:58:53 SkyScan query done: ret=0 az=40.995<-2733 ze=52.275<-8515 Statuses=0008 0009 10:58:53 Msec=3750 True Az=40.995 Ze=52.275 Az status=0008 Ze status=0009 10:58:54 Check angles 10:58:54 SkyScan query 10:58:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:58:54 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:58:54 Message to Master queued w/err=0: serial=62580 error=0 10:58:59 Received message from Master: op=Filter serial=62581 10:58:59 Color wheel filter change from 0 to 0 10:58:59 FLIGetFilterPos err=0 currentPosition=0 10:58:59 FLIGetStepsRemaining err=0 RemainingSteps=0 10:58:59 Filter is already there-color wheel unchanged 10:58:59 Received message from Master: op=Shutter serial=62582 10:58:59 Shutter LASER close 10:58:59 Received message from Camera: op=State serial=62584 10:58:59 GetSingleValue result=40 Value=cccccccc 10:58:59 SkyScan query 10:59:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:59:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:00 Parameters OK 10:59:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:00 Set A/D data flow result=40 10:59:00 Set A/D channel type result=40 10:59:00 Set A/D encoding result=40 10:59:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:00 Set channel filter=0.000000e+000 result=40 10:59:00 Config A/D Result=40 10:59:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:00 Get A/D filter: -9.255963e+061 result=40 10:59:00 Get A/D value=-858993460 result=40 10:59:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:00 Parameters OK 10:59:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:00 Set A/D data flow result=40 10:59:00 Set A/D channel type result=40 10:59:00 Set A/D encoding result=40 10:59:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:00 Set channel filter=0.000000e+000 result=40 10:59:00 Config A/D Result=40 10:59:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:00 Get A/D filter: -9.255963e+061 result=40 10:59:00 Get A/D value=-858993460 result=40 10:59:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:59:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:59:00 Aux= 10:59:00 Message to Camera, serial 62584 queued 10:59:37 Received message from Master: op=PointingHead serial=62597 10:59:37 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:59:37 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:59:37 Point started: ret=0 10:59:37 point_skyscan result=0 10:59:38 Check angles 10:59:38 SkyScan query 10:59:39 SkyScan query done: ret=0 az=64.095<-4273 ze=66.555<-7563 Statuses=0009 0008 10:59:39 Msec=0 True Az=64.095 Ze=66.555 Az status=0009 Ze status=0008 10:59:39 Check angles 10:59:39 SkyScan query 10:59:39 SkyScan query done: ret=0 az=81.87<-5458 ze=66.495<-7567 Statuses=0009 0008 10:59:39 Msec=750 True Az=81.87 Ze=66.495 Az status=0009 Ze status=0008 10:59:39 Check angles 10:59:39 SkyScan query 10:59:40 SkyScan query done: ret=0 az=99.495<-6633 ze=66.495<-7567 Statuses=0009 0008 10:59:40 Msec=1500 True Az=99.495 Ze=66.495 Az status=0009 Ze status=0008 10:59:40 Check angles 10:59:40 SkyScan query 10:59:41 SkyScan query done: ret=0 az=117.015<-7801 ze=66.495<-7567 Statuses=0009 0008 10:59:41 Msec=2250 True Az=117.015 Ze=66.495 Az status=0009 Ze status=0008 10:59:41 Check angles 10:59:41 SkyScan query 10:59:42 SkyScan query done: ret=0 az=134.715<-8981 ze=66.495<-7567 Statuses=0009 0008 10:59:42 Msec=3000 True Az=134.715 Ze=66.495 Az status=0009 Ze status=0008 10:59:42 Check angles 10:59:42 SkyScan query 10:59:42 SkyScan query done: ret=0 az=152.265<-10151 ze=66.495<-7567 Statuses=0009 0008 10:59:42 Msec=3750 True Az=152.265 Ze=66.495 Az status=0009 Ze status=0008 10:59:42 Check angles 10:59:42 SkyScan query 10:59:43 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:59:43 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 10:59:43 Message to Master queued w/err=0: serial=62597 error=0 10:59:48 Received message from Master: op=Filter serial=62598 10:59:48 Color wheel filter change from 0 to 0 10:59:48 FLIGetFilterPos err=0 currentPosition=0 10:59:48 FLIGetStepsRemaining err=0 RemainingSteps=0 10:59:48 Filter is already there-color wheel unchanged 10:59:48 Received message from Master: op=Shutter serial=62599 10:59:48 Shutter LASER close 10:59:48 Received message from Camera: op=State serial=62601 10:59:48 GetSingleValue result=40 Value=cccccccc 10:59:48 SkyScan query 10:59:49 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:59:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:49 Parameters OK 10:59:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:49 Set A/D data flow result=40 10:59:49 Set A/D channel type result=40 10:59:49 Set A/D encoding result=40 10:59:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:49 Set channel filter=0.000000e+000 result=40 10:59:49 Config A/D Result=40 10:59:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:49 Get A/D filter: -9.255963e+061 result=40 10:59:49 Get A/D value=-858993460 result=40 10:59:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:49 Parameters OK 10:59:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:49 Set A/D data flow result=40 10:59:49 Set A/D channel type result=40 10:59:49 Set A/D encoding result=40 10:59:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:49 Set channel filter=0.000000e+000 result=40 10:59:49 Config A/D Result=40 10:59:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:49 Get A/D filter: -9.255963e+061 result=40 10:59:49 Get A/D value=-858993460 result=40 10:59:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:49 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:59:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:59:49 Aux= 10:59:49 Message to Camera, serial 62601 queued 11:00:26 Received message from Master: op=PointingHead serial=62614 11:00:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:00:26 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:00:26 Point started: ret=0 11:00:26 point_skyscan result=0 11:00:27 Check angles 11:00:27 SkyScan query 11:00:27 SkyScan query done: ret=0 az=134.58<-8972 ze=36.33<-9578 Statuses=0009 0009 11:00:27 Msec=0 True Az=134.58 Ze=36.33 Az status=0009 Ze status=0009 11:00:28 Check angles 11:00:28 SkyScan query 11:00:28 SkyScan query done: ret=0 az=117.21<-7814 ze=15.42<-10972 Statuses=0009 0009 11:00:28 Msec=750 True Az=117.21 Ze=15.42 Az status=0009 Ze status=0009 11:00:28 Check angles 11:00:28 SkyScan query 11:00:29 SkyScan query done: ret=0 az=99.84<-6656 ze=-5.58<-12372 Statuses=0009 0009 11:00:29 Msec=1500 True Az=99.84 Ze=-5.58 Az status=0009 Ze status=0009 11:00:29 Check angles 11:00:29 SkyScan query 11:00:30 SkyScan query done: ret=0 az=82.35<-5490 ze=-26.535<-13769 Statuses=0009 0009 11:00:30 Msec=2250 True Az=82.35 Ze=-26.535 Az status=0009 Ze status=0009 11:00:30 Check angles 11:00:30 SkyScan query 11:00:30 SkyScan query done: ret=0 az=64.77<-4318 ze=-38.58<-14572 Statuses=0009 0008 11:00:30 Msec=3000 True Az=64.77 Ze=-38.58 Az status=0009 Ze status=0008 11:00:31 Check angles 11:00:31 SkyScan query 11:00:31 SkyScan query done: ret=0 az=47.295<-3153 ze=-38.52<-14568 Statuses=0009 0008 11:00:31 Msec=3750 True Az=47.295 Ze=-38.52 Az status=0009 Ze status=0008 11:00:31 Check angles 11:00:31 SkyScan query 11:00:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:00:32 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:00:32 Message to Master queued w/err=0: serial=62614 error=0 11:00:37 Received message from Master: op=Filter serial=62615 11:00:37 Color wheel filter change from 0 to 0 11:00:37 FLIGetFilterPos err=0 currentPosition=0 11:00:37 FLIGetStepsRemaining err=0 RemainingSteps=0 11:00:37 Filter is already there-color wheel unchanged 11:00:37 Received message from Master: op=Shutter serial=62616 11:00:37 Shutter LASER close 11:00:37 Received message from Camera: op=State serial=62618 11:00:37 GetSingleValue result=40 Value=cccccccc 11:00:37 SkyScan query 11:00:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:00:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:38 Parameters OK 11:00:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:38 Set A/D data flow result=40 11:00:38 Set A/D channel type result=40 11:00:38 Set A/D encoding result=40 11:00:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:38 Set channel filter=0.000000e+000 result=40 11:00:38 Config A/D Result=40 11:00:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:38 Get A/D filter: -9.255963e+061 result=40 11:00:38 Get A/D value=-858993460 result=40 11:00:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:38 Parameters OK 11:00:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:38 Set A/D data flow result=40 11:00:38 Set A/D channel type result=40 11:00:38 Set A/D encoding result=40 11:00:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:38 Set channel filter=0.000000e+000 result=40 11:00:38 Config A/D Result=40 11:00:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:38 Get A/D filter: -9.255963e+061 result=40 11:00:38 Get A/D value=-858993460 result=40 11:00:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:00:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:00:38 Aux= 11:00:38 Message to Camera, serial 62618 queued 11:01:14 Received message from Master: op=PointingHead serial=62631 11:01:14 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:01:14 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:01:15 Point started: ret=0 11:01:15 point_skyscan result=0 11:01:16 Check angles 11:01:16 SkyScan query 11:01:16 SkyScan query done: ret=0 az=64.275<-4285 ze=-68.595<-16573 Statuses=0009 0009 11:01:16 Msec=0 True Az=64.275 Ze=-68.595 Az status=0009 Ze status=0009 11:01:16 Check angles 11:01:16 SkyScan query 11:01:17 SkyScan query done: ret=0 az=81.735<-5449 ze=-89.565<-17971 Statuses=0009 0009 11:01:17 Msec=750 True Az=81.735 Ze=-89.565 Az status=0009 Ze status=0009 11:01:17 Check angles 11:01:17 SkyScan query 11:01:18 SkyScan query done: ret=0 az=99.405<-6627 ze=-110.505<-19367 Statuses=0009 0009 11:01:18 Msec=1500 True Az=99.405 Ze=-110.505 Az status=0009 Ze status=0009 11:01:18 Check angles 11:01:18 SkyScan query 11:01:18 SkyScan query done: ret=0 az=116.775<-7785 ze=-131.445<-20763 Statuses=0009 0009 11:01:18 Msec=2250 True Az=116.775 Ze=-131.445 Az status=0009 Ze status=0009 11:01:19 Check angles 11:01:19 SkyScan query 11:01:19 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 11:01:19 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 11:01:19 Check angles 11:01:19 SkyScan query 11:01:20 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:01:20 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:01:20 Message to Master queued w/err=0: serial=62631 error=0 11:01:25 Received message from Master: op=Filter serial=62632 11:01:25 Color wheel filter change from 0 to 0 11:01:25 FLIGetFilterPos err=0 currentPosition=0 11:01:25 FLIGetStepsRemaining err=0 RemainingSteps=0 11:01:25 Filter is already there-color wheel unchanged 11:01:25 Received message from Master: op=Shutter serial=62633 11:01:25 Shutter LASER close 11:01:25 Received message from Camera: op=State serial=62635 11:01:25 GetSingleValue result=40 Value=cccccccc 11:01:25 SkyScan query 11:01:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:01:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:26 Parameters OK 11:01:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:26 Set A/D data flow result=40 11:01:26 Set A/D channel type result=40 11:01:26 Set A/D encoding result=40 11:01:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:26 Set channel filter=0.000000e+000 result=40 11:01:26 Config A/D Result=40 11:01:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:26 Get A/D filter: -9.255963e+061 result=40 11:01:26 Get A/D value=-858993460 result=40 11:01:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:26 Parameters OK 11:01:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:26 Set A/D data flow result=40 11:01:26 Set A/D channel type result=40 11:01:26 Set A/D encoding result=40 11:01:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:26 Set channel filter=0.000000e+000 result=40 11:01:26 Config A/D Result=40 11:01:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:26 Get A/D filter: -9.255963e+061 result=40 11:01:26 Get A/D value=-858993460 result=40 11:01:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:26 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:01:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:01:26 Aux= 11:01:26 Message to Camera, serial 62635 queued 11:02:02 Received message from Master: op=PointingHead serial=62647 11:02:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:02:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:02:02 Point started: ret=0 11:02:02 point_skyscan result=0 11:02:03 Check angles 11:02:03 SkyScan query 11:02:03 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 11:02:03 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 11:02:03 Check angles 11:02:03 SkyScan query 11:02:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:02:04 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:02:04 Message to Master queued w/err=0: serial=62647 error=0 11:02:09 Received message from Master: op=Filter serial=62648 11:02:09 Color wheel filter change from 0 to 0 11:02:09 FLIGetFilterPos err=0 currentPosition=0 11:02:09 FLIGetStepsRemaining err=0 RemainingSteps=0 11:02:09 Filter is already there-color wheel unchanged 11:02:09 Received message from Master: op=Shutter serial=62649 11:02:09 Shutter LASER open 11:02:09 Received message from Camera: op=State serial=62651 11:02:09 GetSingleValue result=40 Value=cccccccc 11:02:09 SkyScan query 11:02:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:02:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:10 Parameters OK 11:02:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:10 Set A/D data flow result=40 11:02:10 Set A/D channel type result=40 11:02:10 Set A/D encoding result=40 11:02:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:10 Set channel filter=0.000000e+000 result=40 11:02:10 Config A/D Result=40 11:02:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:10 Get A/D filter: -9.255963e+061 result=40 11:02:10 Get A/D value=-858993460 result=40 11:02:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:10 Parameters OK 11:02:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:10 Set A/D data flow result=40 11:02:10 Set A/D channel type result=40 11:02:10 Set A/D encoding result=40 11:02:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:10 Set channel filter=0.000000e+000 result=40 11:02:10 Config A/D Result=40 11:02:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:10 Get A/D filter: -9.255963e+061 result=40 11:02:10 Get A/D value=-858993460 result=40 11:02:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:02:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:02:10 Aux= 11:02:10 Message to Camera, serial 62651 queued 11:02:18 Received message from Master: op=Shutter serial=62661 11:02:18 Shutter LASER close 11:02:19 Received message from Master: op=PointingHead serial=62665 11:02:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:02:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:02:19 Point started: ret=0 11:02:19 point_skyscan result=0 11:02:20 Check angles 11:02:20 SkyScan query 11:02:21 SkyScan query done: ret=0 az=136.005<-9067 ze=-143.34<-21556 Statuses=0009 0009 11:02:21 Msec=0 True Az=136.005 Ze=-143.34 Az status=0009 Ze status=0009 11:02:21 Check angles 11:02:21 SkyScan query 11:02:21 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.37<-20158 Statuses=0009 0009 11:02:21 Msec=750 True Az=153.36 Ze=-122.37 Az status=0009 Ze status=0009 11:02:22 Check angles 11:02:22 SkyScan query 11:02:22 SkyScan query done: ret=0 az=171.21<-11414 ze=-100.98<-18732 Statuses=0009 0009 11:02:22 Msec=1500 True Az=171.21 Ze=-100.98 Az status=0009 Ze status=0009 11:02:22 Check angles 11:02:22 SkyScan query 11:02:23 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.07<-17338 Statuses=0008 0009 11:02:23 Msec=2250 True Az=176.025 Ze=-80.07 Az status=0008 Ze status=0009 11:02:23 Check angles 11:02:23 SkyScan query 11:02:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.055<-15937 Statuses=0008 0009 11:02:24 Msec=3000 True Az=175.995 Ze=-59.055 Az status=0008 Ze status=0009 11:02:24 Check angles 11:02:24 SkyScan query 11:02:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:02:24 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:02:24 Message to Master queued w/err=0: serial=62665 error=0 11:02:29 Received message from Master: op=Filter serial=62666 11:02:29 Color wheel filter change from 0 to 0 11:02:29 FLIGetFilterPos err=0 currentPosition=0 11:02:29 FLIGetStepsRemaining err=0 RemainingSteps=0 11:02:29 Filter is already there-color wheel unchanged 11:02:30 Received message from Master: op=Shutter serial=62667 11:02:30 Shutter LASER close 11:02:30 Received message from Camera: op=State serial=62669 11:02:30 GetSingleValue result=40 Value=cccccccc 11:02:30 SkyScan query 11:02:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:02:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:30 Parameters OK 11:02:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:30 Set A/D data flow result=40 11:02:30 Set A/D channel type result=40 11:02:30 Set A/D encoding result=40 11:02:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:30 Set channel filter=0.000000e+000 result=40 11:02:30 Config A/D Result=40 11:02:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:30 Get A/D filter: -9.255963e+061 result=40 11:02:30 Get A/D value=-858993460 result=40 11:02:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:30 Parameters OK 11:02:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:30 Set A/D data flow result=40 11:02:30 Set A/D channel type result=40 11:02:30 Set A/D encoding result=40 11:02:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:30 Set channel filter=0.000000e+000 result=40 11:02:30 Config A/D Result=40 11:02:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:30 Get A/D filter: -9.255963e+061 result=40 11:02:30 Get A/D value=-858993460 result=40 11:02:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:02:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:02:30 Aux= 11:02:30 Message to Camera, serial 62669 queued 11:03:07 Received message from Master: op=PointingHead serial=62682 11:03:07 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:03:07 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:03:07 Point started: ret=0 11:03:07 point_skyscan result=0 11:03:08 Check angles 11:03:08 SkyScan query 11:03:09 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.9<-13460 Statuses=0009 0009 11:03:09 Msec=0 True Az=152.985 Ze=-21.9 Az status=0009 Ze status=0009 11:03:09 Check angles 11:03:09 SkyScan query 11:03:10 SkyScan query done: ret=0 az=135.27<-9018 ze=-0.465<-12031 Statuses=0009 0009 11:03:10 Msec=750 True Az=135.27 Ze=-0.465 Az status=0009 Ze status=0009 11:03:10 Check angles 11:03:10 SkyScan query 11:03:10 SkyScan query done: ret=0 az=117.69<-7846 ze=20.475<-10635 Statuses=0009 0009 11:03:10 Msec=1500 True Az=117.69 Ze=20.475 Az status=0009 Ze status=0009 11:03:11 Check angles 11:03:11 SkyScan query 11:03:11 SkyScan query done: ret=0 az=100.23<-6682 ze=41.445<-9237 Statuses=0009 0009 11:03:11 Msec=2250 True Az=100.23 Ze=41.445 Az status=0009 Ze status=0009 11:03:11 Check angles 11:03:11 SkyScan query 11:03:12 SkyScan query done: ret=0 az=86.07<-5738 ze=51.555<-8563 Statuses=0009 0008 11:03:12 Msec=3000 True Az=86.07 Ze=51.555 Az status=0009 Ze status=0008 11:03:12 Check angles 11:03:12 SkyScan query 11:03:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:03:13 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:03:13 Message to Master queued w/err=0: serial=62682 error=0 11:03:18 Received message from Master: op=Filter serial=62683 11:03:18 Color wheel filter change from 0 to 0 11:03:18 FLIGetFilterPos err=0 currentPosition=0 11:03:18 FLIGetStepsRemaining err=0 RemainingSteps=0 11:03:18 Filter is already there-color wheel unchanged 11:03:18 Received message from Master: op=Shutter serial=62684 11:03:18 Shutter LASER close 11:03:18 Received message from Camera: op=State serial=62686 11:03:18 GetSingleValue result=40 Value=cccccccc 11:03:18 SkyScan query 11:03:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:03:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:18 Parameters OK 11:03:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:18 Set A/D data flow result=40 11:03:18 Set A/D channel type result=40 11:03:18 Set A/D encoding result=40 11:03:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:18 Set channel filter=0.000000e+000 result=40 11:03:18 Config A/D Result=40 11:03:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:18 Get A/D filter: -9.255963e+061 result=40 11:03:18 Get A/D value=-858993460 result=40 11:03:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:18 Parameters OK 11:03:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:18 Set A/D data flow result=40 11:03:18 Set A/D channel type result=40 11:03:18 Set A/D encoding result=40 11:03:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:18 Set channel filter=0.000000e+000 result=40 11:03:18 Config A/D Result=40 11:03:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:18 Get A/D filter: -9.255963e+061 result=40 11:03:18 Get A/D value=-858993460 result=40 11:03:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:03:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:03:18 Aux= 11:03:18 Message to Camera, serial 62686 queued 11:03:55 Received message from Master: op=PointingHead serial=62699 11:03:55 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:03:55 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:03:56 Point started: ret=0 11:03:56 point_skyscan result=0 11:03:56 Check angles 11:03:56 SkyScan query 11:03:57 SkyScan query done: ret=0 az=108.765<-7251 ze=38.475<-9435 Statuses=0009 0008 11:03:57 Msec=0 True Az=108.765 Ze=38.475 Az status=0009 Ze status=0008 11:03:57 Check angles 11:03:57 SkyScan query 11:03:58 SkyScan query done: ret=0 az=126.54<-8436 ze=38.505<-9433 Statuses=0009 0008 11:03:58 Msec=750 True Az=126.54 Ze=38.505 Az status=0009 Ze status=0008 11:03:58 Check angles 11:03:58 SkyScan query 11:03:58 SkyScan query done: ret=0 az=144.15<-9610 ze=38.505<-9433 Statuses=0009 0008 11:03:58 Msec=1500 True Az=144.15 Ze=38.505 Az status=0009 Ze status=0008 11:03:59 Check angles 11:03:59 SkyScan query 11:03:59 SkyScan query done: ret=0 az=161.535<-10769 ze=38.505<-9433 Statuses=0009 0008 11:03:59 Msec=2250 True Az=161.535 Ze=38.505 Az status=0009 Ze status=0008 11:03:59 Check angles 11:03:59 SkyScan query 11:04:00 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 11:04:00 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 11:04:00 Check angles 11:04:00 SkyScan query 11:04:01 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:04:01 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:04:01 Message to Master queued w/err=0: serial=62699 error=0 11:04:06 Received message from Master: op=Filter serial=62700 11:04:06 Color wheel filter change from 0 to 0 11:04:06 FLIGetFilterPos err=0 currentPosition=0 11:04:06 FLIGetStepsRemaining err=0 RemainingSteps=0 11:04:06 Filter is already there-color wheel unchanged 11:04:06 Received message from Master: op=Shutter serial=62701 11:04:06 Shutter LASER close 11:04:06 Received message from Camera: op=State serial=62703 11:04:06 GetSingleValue result=40 Value=cccccccc 11:04:06 SkyScan query 11:04:06 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:04:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:06 Parameters OK 11:04:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:06 Set A/D data flow result=40 11:04:06 Set A/D channel type result=40 11:04:06 Set A/D encoding result=40 11:04:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:06 Set channel filter=0.000000e+000 result=40 11:04:06 Config A/D Result=40 11:04:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:06 Get A/D filter: -9.255963e+061 result=40 11:04:06 Get A/D value=-858993460 result=40 11:04:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:06 Parameters OK 11:04:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:06 Set A/D data flow result=40 11:04:06 Set A/D channel type result=40 11:04:06 Set A/D encoding result=40 11:04:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:06 Set channel filter=0.000000e+000 result=40 11:04:06 Config A/D Result=40 11:04:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:06 Get A/D filter: -9.255963e+061 result=40 11:04:06 Get A/D value=-858993460 result=40 11:04:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:04:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:04:06 Aux= 11:04:06 Message to Camera, serial 62703 queued 11:04:43 Received message from Master: op=PointingHead serial=62716 11:04:43 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:04:43 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:04:44 Point started: ret=0 11:04:44 point_skyscan result=0 11:04:44 Check angles 11:04:44 SkyScan query 11:04:45 SkyScan query done: ret=0 az=152.94<-10196 ze=8.46<-11436 Statuses=0009 0009 11:04:45 Msec=0 True Az=152.94 Ze=8.46 Az status=0009 Ze status=0009 11:04:45 Check angles 11:04:45 SkyScan query 11:04:46 SkyScan query done: ret=0 az=135.51<-9034 ze=-12.465<-12831 Statuses=0009 0009 11:04:46 Msec=750 True Az=135.51 Ze=-12.465 Az status=0009 Ze status=0009 11:04:46 Check angles 11:04:46 SkyScan query 11:04:46 SkyScan query done: ret=0 az=117.51<-7834 ze=-33.87<-14258 Statuses=0009 0009 11:04:46 Msec=1500 True Az=117.51 Ze=-33.87 Az status=0009 Ze status=0009 11:04:47 Check angles 11:04:47 SkyScan query 11:04:47 SkyScan query done: ret=0 az=99.81<-6654 ze=-51.57<-15438 Statuses=0009 0009 11:04:47 Msec=2250 True Az=99.81 Ze=-51.57 Az status=0009 Ze status=0009 11:04:47 Check angles 11:04:47 SkyScan query 11:04:48 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.525<-15435 Statuses=0009 0008 11:04:48 Msec=3000 True Az=86.025 Ze=-51.525 Az status=0009 Ze status=0008 11:04:48 Check angles 11:04:48 SkyScan query 11:04:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:04:49 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:04:49 Message to Master queued w/err=0: serial=62716 error=0 11:04:54 Received message from Master: op=Filter serial=62717 11:04:54 Color wheel filter change from 0 to 0 11:04:54 FLIGetFilterPos err=0 currentPosition=0 11:04:54 FLIGetStepsRemaining err=0 RemainingSteps=0 11:04:54 Filter is already there-color wheel unchanged 11:04:54 Received message from Master: op=Shutter serial=62718 11:04:54 Shutter LASER close 11:04:54 Received message from Camera: op=State serial=62720 11:04:54 GetSingleValue result=40 Value=cccccccc 11:04:54 SkyScan query 11:04:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:04:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:55 Parameters OK 11:04:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:55 Set A/D data flow result=40 11:04:55 Set A/D channel type result=40 11:04:55 Set A/D encoding result=40 11:04:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:55 Set channel filter=0.000000e+000 result=40 11:04:55 Config A/D Result=40 11:04:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:55 Get A/D filter: -9.255963e+061 result=40 11:04:55 Get A/D value=-858993460 result=40 11:04:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:55 Parameters OK 11:04:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:55 Set A/D data flow result=40 11:04:55 Set A/D channel type result=40 11:04:55 Set A/D encoding result=40 11:04:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:55 Set channel filter=0.000000e+000 result=40 11:04:55 Config A/D Result=40 11:04:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:55 Get A/D filter: -9.255963e+061 result=40 11:04:55 Get A/D value=-858993460 result=40 11:04:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:04:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:04:55 Aux= 11:04:55 Message to Camera, serial 62720 queued 11:05:31 Received message from Master: op=PointingHead serial=62733 11:05:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:05:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:05:32 Point started: ret=0 11:05:32 point_skyscan result=0 11:05:33 Check angles 11:05:33 SkyScan query 11:05:33 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.75<-17450 Statuses=0009 0009 11:05:33 Msec=0 True Az=109.395 Ze=-81.75 Az status=0009 Ze status=0009 11:05:33 Check angles 11:05:33 SkyScan query 11:05:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.705<-18847 Statuses=0008 0009 11:05:34 Msec=750 True Az=112.995 Ze=-102.705 Az status=0008 Ze status=0009 11:05:34 Check angles 11:05:34 SkyScan query 11:05:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.66<-20244 Statuses=0008 0009 11:05:35 Msec=1500 True Az=112.995 Ze=-123.66 Az status=0008 Ze status=0009 11:05:35 Check angles 11:05:35 SkyScan query 11:05:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.63<-21642 Statuses=0008 0009 11:05:35 Msec=2250 True Az=112.995 Ze=-144.63 Az status=0008 Ze status=0009 11:05:36 Check angles 11:05:36 SkyScan query 11:05:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 11:05:36 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 11:05:36 Check angles 11:05:36 SkyScan query 11:05:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:05:37 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:05:37 Message to Master queued w/err=0: serial=62733 error=0 11:05:42 Received message from Master: op=Filter serial=62734 11:05:42 Color wheel filter change from 0 to 0 11:05:42 FLIGetFilterPos err=0 currentPosition=0 11:05:42 FLIGetStepsRemaining err=0 RemainingSteps=0 11:05:42 Filter is already there-color wheel unchanged 11:05:42 Received message from Master: op=Shutter serial=62735 11:05:42 Shutter LASER open 11:05:42 Received message from Camera: op=State serial=62737 11:05:42 GetSingleValue result=40 Value=cccccccc 11:05:42 SkyScan query 11:05:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:05:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:43 Parameters OK 11:05:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:43 Set A/D data flow result=40 11:05:43 Set A/D channel type result=40 11:05:43 Set A/D encoding result=40 11:05:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:43 Set channel filter=0.000000e+000 result=40 11:05:43 Config A/D Result=40 11:05:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:43 Get A/D filter: -9.255963e+061 result=40 11:05:43 Get A/D value=-858993460 result=40 11:05:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:43 Parameters OK 11:05:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:43 Set A/D data flow result=40 11:05:43 Set A/D channel type result=40 11:05:43 Set A/D encoding result=40 11:05:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:43 Set channel filter=0.000000e+000 result=40 11:05:43 Config A/D Result=40 11:05:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:43 Get A/D filter: -9.255963e+061 result=40 11:05:43 Get A/D value=-858993460 result=40 11:05:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:05:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:05:43 Aux= 11:05:43 Message to Camera, serial 62737 queued 11:05:51 Received message from Master: op=Shutter serial=62747 11:05:51 Shutter LASER close 11:05:52 Received message from Master: op=PointingHead serial=62751 11:05:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:05:52 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-11 11:05:52] 11:05:52 Point started: ret=0 11:05:52 point_skyscan result=0 11:05:53 Check angles 11:05:53 SkyScan query 11:05:53 SkyScan query done: ret=0 az=88.605<-5907 ze=155.565<-1629 Statuses=0009 0009 11:05:53 Msec=0 True Az=88.605 Ze=155.565 Az status=0009 Ze status=0009 11:05:54 Check angles 11:05:54 SkyScan query 11:05:54 SkyScan query done: ret=0 az=70.755<-4717 ze=134.175<-3055 Statuses=0009 0009 11:05:54 Msec=750 True Az=70.755 Ze=134.175 Az status=0009 Ze status=0009 11:05:54 Check angles 11:05:54 SkyScan query 11:05:55 SkyScan query done: ret=0 az=52.785<-3519 ze=112.77<-4482 Statuses=0009 0009 11:05:55 Msec=1500 True Az=52.785 Ze=112.77 Az status=0009 Ze status=0009 11:05:55 Check angles 11:05:55 SkyScan query 11:05:56 SkyScan query done: ret=0 az=41.025<-2735 ze=91.8<-5880 Statuses=0009 0009 11:05:56 Msec=2250 True Az=41.025 Ze=91.8 Az status=0009 Ze status=0009 11:05:56 Check angles 11:05:56 SkyScan query 11:05:56 SkyScan query done: ret=0 az=40.995<-2733 ze=70.875<-7275 Statuses=0008 0009 11:05:56 Msec=3000 True Az=40.995 Ze=70.875 Az status=0008 Ze status=0009 11:05:57 Check angles 11:05:57 SkyScan query 11:05:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.54<-8564 Statuses=0008 0009 11:05:57 Msec=3750 True Az=40.995 Ze=51.54 Az status=0008 Ze status=0009 11:05:57 Check angles 11:05:57 SkyScan query 11:05:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:05:58 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:05:58 Message to Master queued w/err=0: serial=62751 error=0 11:06:03 Received message from Master: op=Filter serial=62752 11:06:03 Color wheel filter change from 0 to 0 11:06:03 FLIGetFilterPos err=0 currentPosition=0 11:06:03 FLIGetStepsRemaining err=0 RemainingSteps=0 11:06:03 Filter is already there-color wheel unchanged 11:06:03 Received message from Master: op=Shutter serial=62753 11:06:03 Shutter LASER close 11:06:03 Received message from Camera: op=State serial=62755 11:06:03 GetSingleValue result=40 Value=cccccccc 11:06:03 SkyScan query 11:06:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:06:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:04 Parameters OK 11:06:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:04 Set A/D data flow result=40 11:06:04 Set A/D channel type result=40 11:06:04 Set A/D encoding result=40 11:06:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:04 Set channel filter=0.000000e+000 result=40 11:06:04 Config A/D Result=40 11:06:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:04 Get A/D filter: -9.255963e+061 result=40 11:06:04 Get A/D value=-858993460 result=40 11:06:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:04 Parameters OK 11:06:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:04 Set A/D data flow result=40 11:06:04 Set A/D channel type result=40 11:06:04 Set A/D encoding result=40 11:06:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:04 Set channel filter=0.000000e+000 result=40 11:06:04 Config A/D Result=40 11:06:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:04 Get A/D filter: -9.255963e+061 result=40 11:06:04 Get A/D value=-858993460 result=40 11:06:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:06:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:06:04 Aux= 11:06:04 Message to Camera, serial 62755 queued 11:06:41 Received message from Master: op=PointingHead serial=62768 11:06:41 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:06:41 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:06:41 Point started: ret=0 11:06:41 point_skyscan result=0 11:06:42 Check angles 11:06:42 SkyScan query 11:06:42 SkyScan query done: ret=0 az=63.99<-4266 ze=66.555<-7563 Statuses=0009 0008 11:06:42 Msec=0 True Az=63.99 Ze=66.555 Az status=0009 Ze status=0008 11:06:43 Check angles 11:06:43 SkyScan query 11:06:43 SkyScan query done: ret=0 az=81.3<-5420 ze=66.51<-7566 Statuses=0009 0008 11:06:43 Msec=750 True Az=81.3 Ze=66.51 Az status=0009 Ze status=0008 11:06:43 Check angles 11:06:43 SkyScan query 11:06:44 SkyScan query done: ret=0 az=98.88<-6592 ze=66.495<-7567 Statuses=0009 0008 11:06:44 Msec=1500 True Az=98.88 Ze=66.495 Az status=0009 Ze status=0008 11:06:44 Check angles 11:06:44 SkyScan query 11:06:45 SkyScan query done: ret=0 az=116.49<-7766 ze=66.495<-7567 Statuses=0009 0008 11:06:45 Msec=2250 True Az=116.49 Ze=66.495 Az status=0009 Ze status=0008 11:06:45 Check angles 11:06:45 SkyScan query 11:06:45 SkyScan query done: ret=0 az=134.01<-8934 ze=66.495<-7567 Statuses=0009 0008 11:06:45 Msec=3000 True Az=134.01 Ze=66.495 Az status=0009 Ze status=0008 11:06:46 Check angles 11:06:46 SkyScan query 11:06:46 SkyScan query done: ret=0 az=151.395<-10093 ze=66.495<-7567 Statuses=0009 0008 11:06:46 Msec=3750 True Az=151.395 Ze=66.495 Az status=0009 Ze status=0008 11:06:46 Check angles 11:06:46 SkyScan query 11:06:47 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:06:47 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 11:06:47 Message to Master queued w/err=0: serial=62768 error=0 11:06:52 Received message from Master: op=Filter serial=62769 11:06:52 Color wheel filter change from 0 to 0 11:06:52 FLIGetFilterPos err=0 currentPosition=0 11:06:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:06:52 Filter is already there-color wheel unchanged 11:06:52 Received message from Master: op=Shutter serial=62770 11:06:52 Shutter LASER close 11:06:52 Received message from Camera: op=State serial=62772 11:06:52 GetSingleValue result=40 Value=cccccccc 11:06:52 SkyScan query 11:06:53 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:06:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:53 Parameters OK 11:06:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:53 Set A/D data flow result=40 11:06:53 Set A/D channel type result=40 11:06:53 Set A/D encoding result=40 11:06:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:53 Set channel filter=0.000000e+000 result=40 11:06:53 Config A/D Result=40 11:06:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:53 Get A/D filter: -9.255963e+061 result=40 11:06:53 Get A/D value=-858993460 result=40 11:06:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:53 Parameters OK 11:06:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:53 Set A/D data flow result=40 11:06:53 Set A/D channel type result=40 11:06:53 Set A/D encoding result=40 11:06:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:53 Set channel filter=0.000000e+000 result=40 11:06:53 Config A/D Result=40 11:06:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:53 Get A/D filter: -9.255963e+061 result=40 11:06:53 Get A/D value=-858993460 result=40 11:06:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:53 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:06:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:06:53 Aux= 11:06:53 Message to Camera, serial 62772 queued 11:07:30 Received message from Master: op=PointingHead serial=62785 11:07:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:07:30 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:07:30 Point started: ret=0 11:07:30 point_skyscan result=0 11:07:31 Check angles 11:07:31 SkyScan query 11:07:31 SkyScan query done: ret=0 az=134.775<-8985 ze=36.345<-9577 Statuses=0009 0009 11:07:31 Msec=0 True Az=134.775 Ze=36.345 Az status=0009 Ze status=0009 11:07:31 Check angles 11:07:31 SkyScan query 11:07:32 SkyScan query done: ret=0 az=117.24<-7816 ze=15.465<-10969 Statuses=0009 0009 11:07:32 Msec=750 True Az=117.24 Ze=15.465 Az status=0009 Ze status=0009 11:07:32 Check angles 11:07:32 SkyScan query 11:07:33 SkyScan query done: ret=0 az=99.87<-6658 ze=-5.55<-12370 Statuses=0009 0009 11:07:33 Msec=1500 True Az=99.87 Ze=-5.55 Az status=0009 Ze status=0009 11:07:33 Check angles 11:07:33 SkyScan query 11:07:33 SkyScan query done: ret=0 az=82.41<-5494 ze=-26.475<-13765 Statuses=0009 0009 11:07:33 Msec=2250 True Az=82.41 Ze=-26.475 Az status=0009 Ze status=0009 11:07:34 Check angles 11:07:34 SkyScan query 11:07:34 SkyScan query done: ret=0 az=64.77<-4318 ze=-38.565<-14571 Statuses=0009 0008 11:07:34 Msec=3000 True Az=64.77 Ze=-38.565 Az status=0009 Ze status=0008 11:07:34 Check angles 11:07:34 SkyScan query 11:07:35 SkyScan query done: ret=0 az=47.445<-3163 ze=-38.535<-14569 Statuses=0009 0008 11:07:35 Msec=3750 True Az=47.445 Ze=-38.535 Az status=0009 Ze status=0008 11:07:35 Check angles 11:07:35 SkyScan query 11:07:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:07:36 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:07:36 Message to Master queued w/err=0: serial=62785 error=0 11:07:41 Received message from Master: op=Filter serial=62786 11:07:41 Color wheel filter change from 0 to 0 11:07:41 FLIGetFilterPos err=0 currentPosition=0 11:07:41 FLIGetStepsRemaining err=0 RemainingSteps=0 11:07:41 Filter is already there-color wheel unchanged 11:07:41 Received message from Master: op=Shutter serial=62787 11:07:41 Shutter LASER close 11:07:41 Received message from Camera: op=State serial=62789 11:07:41 GetSingleValue result=40 Value=cccccccc 11:07:41 SkyScan query 11:07:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:07:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:42 Parameters OK 11:07:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:42 Set A/D data flow result=40 11:07:42 Set A/D channel type result=40 11:07:42 Set A/D encoding result=40 11:07:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:42 Set channel filter=0.000000e+000 result=40 11:07:42 Config A/D Result=40 11:07:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:42 Get A/D filter: -9.255963e+061 result=40 11:07:42 Get A/D value=-858993460 result=40 11:07:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:42 Parameters OK 11:07:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:42 Set A/D data flow result=40 11:07:42 Set A/D channel type result=40 11:07:42 Set A/D encoding result=40 11:07:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:42 Set channel filter=0.000000e+000 result=40 11:07:42 Config A/D Result=40 11:07:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:42 Get A/D filter: -9.255963e+061 result=40 11:07:42 Get A/D value=-858993460 result=40 11:07:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:07:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:07:42 Aux= 11:07:42 Message to Camera, serial 62789 queued 11:08:18 Received message from Master: op=PointingHead serial=62802 11:08:18 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:08:18 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:08:19 Point started: ret=0 11:08:19 point_skyscan result=0 11:08:19 Check angles 11:08:19 SkyScan query 11:08:20 SkyScan query done: ret=0 az=64.095<-4273 ze=-68.4<-16560 Statuses=0009 0009 11:08:20 Msec=0 True Az=64.095 Ze=-68.4 Az status=0009 Ze status=0009 11:08:20 Check angles 11:08:20 SkyScan query 11:08:21 SkyScan query done: ret=0 az=81.375<-5425 ze=-89.355<-17957 Statuses=0009 0009 11:08:21 Msec=750 True Az=81.375 Ze=-89.355 Az status=0009 Ze status=0009 11:08:21 Check angles 11:08:21 SkyScan query 11:08:22 SkyScan query done: ret=0 az=99.015<-6601 ze=-110.31<-19354 Statuses=0009 0009 11:08:22 Msec=1500 True Az=99.015 Ze=-110.31 Az status=0009 Ze status=0009 11:08:22 Check angles 11:08:22 SkyScan query 11:08:22 SkyScan query done: ret=0 az=116.535<-7769 ze=-131.25<-20750 Statuses=0009 0009 11:08:22 Msec=2250 True Az=116.535 Ze=-131.25 Az status=0009 Ze status=0009 11:08:22 Check angles 11:08:22 SkyScan query 11:08:23 SkyScan query done: ret=0 az=131.19<-8746 ze=-141.54<-21436 Statuses=0009 0008 11:08:23 Msec=3000 True Az=131.19 Ze=-141.54 Az status=0009 Ze status=0008 11:08:23 Check angles 11:08:23 SkyScan query 11:08:24 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:08:24 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:08:24 Message to Master queued w/err=0: serial=62802 error=0 11:08:29 Received message from Master: op=Filter serial=62803 11:08:29 Color wheel filter change from 0 to 0 11:08:29 FLIGetFilterPos err=0 currentPosition=0 11:08:29 FLIGetStepsRemaining err=0 RemainingSteps=0 11:08:29 Filter is already there-color wheel unchanged 11:08:29 Received message from Master: op=Shutter serial=62804 11:08:29 Shutter LASER close 11:08:29 Received message from Camera: op=State serial=62806 11:08:29 GetSingleValue result=40 Value=cccccccc 11:08:29 SkyScan query 11:08:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:08:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:30 Parameters OK 11:08:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:30 Set A/D data flow result=40 11:08:30 Set A/D channel type result=40 11:08:30 Set A/D encoding result=40 11:08:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:30 Set channel filter=0.000000e+000 result=40 11:08:30 Config A/D Result=40 11:08:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:30 Get A/D filter: -9.255963e+061 result=40 11:08:30 Get A/D value=-858993460 result=40 11:08:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:30 Parameters OK 11:08:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:30 Set A/D data flow result=40 11:08:30 Set A/D channel type result=40 11:08:30 Set A/D encoding result=40 11:08:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:30 Set channel filter=0.000000e+000 result=40 11:08:30 Config A/D Result=40 11:08:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:30 Get A/D filter: -9.255963e+061 result=40 11:08:30 Get A/D value=-858993460 result=40 11:08:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:30 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:08:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:08:30 Aux= 11:08:30 Message to Camera, serial 62806 queued 11:09:06 Received message from Master: op=PointingHead serial=62819 11:09:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:09:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:09:07 Point started: ret=0 11:09:07 point_skyscan result=0 11:09:08 Check angles 11:09:08 SkyScan query 11:09:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.48<-23432 Statuses=0009 0009 11:09:08 Msec=0 True Az=112.995 Ze=-171.48 Az status=0009 Ze status=0009 11:09:08 Check angles 11:09:08 SkyScan query 11:09:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:09:09 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:09:09 Message to Master queued w/err=0: serial=62819 error=0 11:09:14 Received message from Master: op=Filter serial=62820 11:09:14 Color wheel filter change from 0 to 0 11:09:14 FLIGetFilterPos err=0 currentPosition=0 11:09:14 FLIGetStepsRemaining err=0 RemainingSteps=0 11:09:14 Filter is already there-color wheel unchanged 11:09:14 Received message from Master: op=Shutter serial=62821 11:09:14 Shutter LASER open 11:09:14 Received message from Camera: op=State serial=62823 11:09:14 GetSingleValue result=40 Value=cccccccc 11:09:14 SkyScan query 11:09:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:09:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:15 Parameters OK 11:09:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:15 Set A/D data flow result=40 11:09:15 Set A/D channel type result=40 11:09:15 Set A/D encoding result=40 11:09:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:15 Set channel filter=0.000000e+000 result=40 11:09:15 Config A/D Result=40 11:09:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:15 Get A/D filter: -9.255963e+061 result=40 11:09:15 Get A/D value=-858993460 result=40 11:09:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:15 Parameters OK 11:09:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:15 Set A/D data flow result=40 11:09:15 Set A/D channel type result=40 11:09:15 Set A/D encoding result=40 11:09:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:15 Set channel filter=0.000000e+000 result=40 11:09:15 Config A/D Result=40 11:09:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:15 Get A/D filter: -9.255963e+061 result=40 11:09:15 Get A/D value=-858993460 result=40 11:09:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:09:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:09:15 Aux= 11:09:15 Message to Camera, serial 62823 queued 11:09:23 Received message from Master: op=Shutter serial=62833 11:09:23 Shutter LASER close 11:09:24 Received message from Master: op=PointingHead serial=62837 11:09:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:09:24 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:09:24 Point started: ret=0 11:09:24 point_skyscan result=0 11:09:25 Check angles 11:09:25 SkyScan query 11:09:25 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.445<-21563 Statuses=0009 0009 11:09:25 Msec=0 True Az=135.765 Ze=-143.445 Az status=0009 Ze status=0009 11:09:26 Check angles 11:09:26 SkyScan query 11:09:26 SkyScan query done: ret=0 az=153.375<-10225 ze=-122.49<-20166 Statuses=0009 0009 11:09:26 Msec=750 True Az=153.375 Ze=-122.49 Az status=0009 Ze status=0009 11:09:26 Check angles 11:09:26 SkyScan query 11:09:27 SkyScan query done: ret=0 az=170.73<-11382 ze=-101.595<-18773 Statuses=0009 0009 11:09:27 Msec=1500 True Az=170.73 Ze=-101.595 Az status=0009 Ze status=0009 11:09:27 Check angles 11:09:27 SkyScan query 11:09:28 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.535<-17369 Statuses=0008 0009 11:09:28 Msec=2250 True Az=176.025 Ze=-80.535 Az status=0008 Ze status=0009 11:09:28 Check angles 11:09:28 SkyScan query 11:09:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.625<-15975 Statuses=0008 0009 11:09:28 Msec=3000 True Az=175.995 Ze=-59.625 Az status=0008 Ze status=0009 11:09:29 Check angles 11:09:29 SkyScan query 11:09:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:09:29 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:09:29 Message to Master queued w/err=0: serial=62837 error=0 11:09:34 Received message from Master: op=Filter serial=62838 11:09:34 Color wheel filter change from 0 to 0 11:09:34 FLIGetFilterPos err=0 currentPosition=0 11:09:34 FLIGetStepsRemaining err=0 RemainingSteps=0 11:09:34 Filter is already there-color wheel unchanged 11:09:34 Received message from Master: op=Shutter serial=62839 11:09:34 Shutter LASER close 11:09:35 Received message from Camera: op=State serial=62841 11:09:35 GetSingleValue result=40 Value=cccccccc 11:09:35 SkyScan query 11:09:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:09:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:35 Parameters OK 11:09:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:35 Set A/D data flow result=40 11:09:35 Set A/D channel type result=40 11:09:35 Set A/D encoding result=40 11:09:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:35 Set channel filter=0.000000e+000 result=40 11:09:35 Config A/D Result=40 11:09:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:35 Get A/D filter: -9.255963e+061 result=40 11:09:35 Get A/D value=-858993460 result=40 11:09:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:35 Parameters OK 11:09:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:35 Set A/D data flow result=40 11:09:35 Set A/D channel type result=40 11:09:35 Set A/D encoding result=40 11:09:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:35 Set channel filter=0.000000e+000 result=40 11:09:35 Config A/D Result=40 11:09:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:35 Get A/D filter: -9.255963e+061 result=40 11:09:35 Get A/D value=-858993460 result=40 11:09:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:09:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:09:35 Aux= 11:09:35 Message to Camera, serial 62841 queued 11:10:12 Received message from Master: op=PointingHead serial=62854 11:10:12 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:10:12 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:10:12 Point started: ret=0 11:10:12 point_skyscan result=0 11:10:13 Check angles 11:10:13 SkyScan query 11:10:14 SkyScan query done: ret=0 az=152.61<-10174 ze=-21.39<-13426 Statuses=0009 0009 11:10:14 Msec=0 True Az=152.61 Ze=-21.39 Az status=0009 Ze status=0009 11:10:14 Check angles 11:10:14 SkyScan query 11:10:14 SkyScan query done: ret=0 az=135.15<-9010 ze=-0.42<-12028 Statuses=0009 0009 11:10:14 Msec=750 True Az=135.15 Ze=-0.42 Az status=0009 Ze status=0009 11:10:15 Check angles 11:10:15 SkyScan query 11:10:15 SkyScan query done: ret=0 az=117.48<-7832 ze=20.535<-10631 Statuses=0009 0009 11:10:15 Msec=1500 True Az=117.48 Ze=20.535 Az status=0009 Ze status=0009 11:10:15 Check angles 11:10:15 SkyScan query 11:10:16 SkyScan query done: ret=0 az=99.81<-6654 ze=41.925<-9205 Statuses=0009 0009 11:10:16 Msec=2250 True Az=99.81 Ze=41.925 Az status=0009 Ze status=0009 11:10:16 Check angles 11:10:16 SkyScan query 11:10:17 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 11:10:17 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 11:10:17 Check angles 11:10:17 SkyScan query 11:10:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:10:17 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:10:17 Message to Master queued w/err=0: serial=62854 error=0 11:10:22 Received message from Master: op=Filter serial=62855 11:10:22 Color wheel filter change from 0 to 0 11:10:22 FLIGetFilterPos err=0 currentPosition=0 11:10:22 FLIGetStepsRemaining err=0 RemainingSteps=0 11:10:22 Filter is already there-color wheel unchanged 11:10:23 Received message from Master: op=Shutter serial=62856 11:10:23 Shutter LASER close 11:10:23 Received message from Camera: op=State serial=62858 11:10:23 GetSingleValue result=40 Value=cccccccc 11:10:23 SkyScan query 11:10:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:10:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:23 Parameters OK 11:10:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:23 Set A/D data flow result=40 11:10:23 Set A/D channel type result=40 11:10:23 Set A/D encoding result=40 11:10:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:23 Set channel filter=0.000000e+000 result=40 11:10:23 Config A/D Result=40 11:10:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:23 Get A/D filter: -9.255963e+061 result=40 11:10:23 Get A/D value=-858993460 result=40 11:10:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:23 Parameters OK 11:10:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:23 Set A/D data flow result=40 11:10:23 Set A/D channel type result=40 11:10:23 Set A/D encoding result=40 11:10:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:23 Set channel filter=0.000000e+000 result=40 11:10:23 Config A/D Result=40 11:10:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:23 Get A/D filter: -9.255963e+061 result=40 11:10:23 Get A/D value=-858993460 result=40 11:10:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:10:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:10:23 Aux= 11:10:23 Message to Camera, serial 62858 queued 11:10:59 Received message from Master: op=PointingHead serial=62870 11:10:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:10:59 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:10:59 Point started: ret=0 11:10:59 point_skyscan result=0 11:11:00 Check angles 11:11:00 SkyScan query 11:11:01 SkyScan query done: ret=0 az=109.41<-7294 ze=38.49<-9434 Statuses=0009 0008 11:11:01 Msec=0 True Az=109.41 Ze=38.49 Az status=0009 Ze status=0008 11:11:01 Check angles 11:11:01 SkyScan query 11:11:02 SkyScan query done: ret=0 az=126.84<-8456 ze=38.505<-9433 Statuses=0009 0008 11:11:02 Msec=750 True Az=126.84 Ze=38.505 Az status=0009 Ze status=0008 11:11:02 Check angles 11:11:02 SkyScan query 11:11:02 SkyScan query done: ret=0 az=144.315<-9621 ze=38.505<-9433 Statuses=0009 0008 11:11:02 Msec=1500 True Az=144.315 Ze=38.505 Az status=0009 Ze status=0008 11:11:03 Check angles 11:11:03 SkyScan query 11:11:03 SkyScan query done: ret=0 az=161.7<-10780 ze=38.505<-9433 Statuses=0009 0008 11:11:03 Msec=2250 True Az=161.7 Ze=38.505 Az status=0009 Ze status=0008 11:11:03 Check angles 11:11:03 SkyScan query 11:11:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:11:04 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:11:04 Check angles 11:11:04 SkyScan query 11:11:05 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:11:05 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:11:05 Message to Master queued w/err=0: serial=62870 error=0 11:11:10 Received message from Master: op=Filter serial=62871 11:11:10 Color wheel filter change from 0 to 0 11:11:10 FLIGetFilterPos err=0 currentPosition=0 11:11:10 FLIGetStepsRemaining err=0 RemainingSteps=0 11:11:10 Filter is already there-color wheel unchanged 11:11:10 Received message from Master: op=Shutter serial=62872 11:11:10 Shutter LASER close 11:11:10 Received message from Camera: op=State serial=62874 11:11:10 GetSingleValue result=40 Value=cccccccc 11:11:10 SkyScan query 11:11:10 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:11:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:10 Parameters OK 11:11:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:10 Set A/D data flow result=40 11:11:10 Set A/D channel type result=40 11:11:10 Set A/D encoding result=40 11:11:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:10 Set channel filter=0.000000e+000 result=40 11:11:10 Config A/D Result=40 11:11:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:10 Get A/D filter: -9.255963e+061 result=40 11:11:10 Get A/D value=-858993460 result=40 11:11:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:10 Parameters OK 11:11:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:10 Set A/D data flow result=40 11:11:10 Set A/D channel type result=40 11:11:10 Set A/D encoding result=40 11:11:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:10 Set channel filter=0.000000e+000 result=40 11:11:10 Config A/D Result=40 11:11:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:10 Get A/D filter: -9.255963e+061 result=40 11:11:10 Get A/D value=-858993460 result=40 11:11:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:11:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:11:10 Aux= 11:11:10 Message to Camera, serial 62874 queued 11:11:47 Received message from Master: op=PointingHead serial=62887 11:11:47 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:11:47 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:11:48 Point started: ret=0 11:11:48 point_skyscan result=0 11:11:48 Check angles 11:11:48 SkyScan query 11:11:49 SkyScan query done: ret=0 az=152.97<-10198 ze=8.79<-11414 Statuses=0009 0009 11:11:49 Msec=0 True Az=152.97 Ze=8.79 Az status=0009 Ze status=0009 11:11:49 Check angles 11:11:49 SkyScan query 11:11:50 SkyScan query done: ret=0 az=135.18<-9012 ze=-12.585<-12839 Statuses=0009 0009 11:11:50 Msec=750 True Az=135.18 Ze=-12.585 Az status=0009 Ze status=0009 11:11:50 Check angles 11:11:50 SkyScan query 11:11:50 SkyScan query done: ret=0 az=117.555<-7837 ze=-33.57<-14238 Statuses=0009 0009 11:11:50 Msec=1500 True Az=117.555 Ze=-33.57 Az status=0009 Ze status=0009 11:11:51 Check angles 11:11:51 SkyScan query 11:11:51 SkyScan query done: ret=0 az=100.185<-6679 ze=-51.555<-15437 Statuses=0009 0009 11:11:51 Msec=2250 True Az=100.185 Ze=-51.555 Az status=0009 Ze status=0009 11:11:51 Check angles 11:11:51 SkyScan query 11:11:52 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 11:11:52 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 11:11:52 Check angles 11:11:52 SkyScan query 11:11:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:11:53 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:11:53 Message to Master queued w/err=0: serial=62887 error=0 11:11:58 Received message from Master: op=Filter serial=62888 11:11:58 Color wheel filter change from 0 to 0 11:11:58 FLIGetFilterPos err=0 currentPosition=0 11:11:58 FLIGetStepsRemaining err=0 RemainingSteps=0 11:11:58 Filter is already there-color wheel unchanged 11:11:58 Received message from Master: op=Shutter serial=62889 11:11:58 Shutter LASER close 11:11:58 Received message from Camera: op=State serial=62891 11:11:58 GetSingleValue result=40 Value=cccccccc 11:11:58 SkyScan query 11:11:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:11:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:58 Parameters OK 11:11:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:58 Set A/D data flow result=40 11:11:58 Set A/D channel type result=40 11:11:58 Set A/D encoding result=40 11:11:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:58 Set channel filter=0.000000e+000 result=40 11:11:58 Config A/D Result=40 11:11:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:58 Get A/D filter: -9.255963e+061 result=40 11:11:58 Get A/D value=-858993460 result=40 11:11:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:58 Parameters OK 11:11:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:58 Set A/D data flow result=40 11:11:58 Set A/D channel type result=40 11:11:58 Set A/D encoding result=40 11:11:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:58 Set channel filter=0.000000e+000 result=40 11:11:58 Config A/D Result=40 11:11:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:58 Get A/D filter: -9.255963e+061 result=40 11:11:58 Get A/D value=-858993460 result=40 11:11:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:11:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:11:58 Aux= 11:11:58 Message to Camera, serial 62891 queued 11:12:35 Received message from Master: op=PointingHead serial=62904 11:12:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:12:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:12:36 Point started: ret=0 11:12:36 point_skyscan result=0 11:12:36 Check angles 11:12:36 SkyScan query 11:12:37 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.165<-17411 Statuses=0009 0009 11:12:37 Msec=0 True Az=108.9 Ze=-81.165 Az status=0009 Ze status=0009 11:12:37 Check angles 11:12:37 SkyScan query 11:12:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.135<-18809 Statuses=0008 0009 11:12:38 Msec=750 True Az=112.995 Ze=-102.135 Az status=0008 Ze status=0009 11:12:38 Check angles 11:12:38 SkyScan query 11:12:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.525<-20235 Statuses=0008 0009 11:12:38 Msec=1500 True Az=112.995 Ze=-123.525 Az status=0008 Ze status=0009 11:12:39 Check angles 11:12:39 SkyScan query 11:12:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.885<-21659 Statuses=0008 0009 11:12:39 Msec=2250 True Az=112.995 Ze=-144.885 Az status=0008 Ze status=0009 11:12:39 Check angles 11:12:39 SkyScan query 11:12:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.825<-23055 Statuses=0008 0009 11:12:40 Msec=3000 True Az=112.995 Ze=-165.825 Az status=0008 Ze status=0009 11:12:40 Check angles 11:12:40 SkyScan query 11:12:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:12:41 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:12:41 Message to Master queued w/err=0: serial=62904 error=0 11:12:46 Received message from Master: op=Filter serial=62905 11:12:46 Color wheel filter change from 0 to 0 11:12:46 FLIGetFilterPos err=0 currentPosition=0 11:12:46 FLIGetStepsRemaining err=0 RemainingSteps=0 11:12:46 Filter is already there-color wheel unchanged 11:12:46 Received message from Master: op=Shutter serial=62906 11:12:46 Shutter LASER open 11:12:46 Received message from Camera: op=State serial=62908 11:12:46 GetSingleValue result=40 Value=cccccccc 11:12:46 SkyScan query 11:12:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:12:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:47 Parameters OK 11:12:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:47 Set A/D data flow result=40 11:12:47 Set A/D channel type result=40 11:12:47 Set A/D encoding result=40 11:12:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:47 Set channel filter=0.000000e+000 result=40 11:12:47 Config A/D Result=40 11:12:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:47 Get A/D filter: -9.255963e+061 result=40 11:12:47 Get A/D value=-858993460 result=40 11:12:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:47 Parameters OK 11:12:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:47 Set A/D data flow result=40 11:12:47 Set A/D channel type result=40 11:12:47 Set A/D encoding result=40 11:12:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:47 Set channel filter=0.000000e+000 result=40 11:12:47 Config A/D Result=40 11:12:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:47 Get A/D filter: -9.255963e+061 result=40 11:12:47 Get A/D value=-858993460 result=40 11:12:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:12:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:12:47 Aux= 11:12:47 Message to Camera, serial 62908 queued 11:12:55 Received message from Master: op=Shutter serial=62918 11:12:55 Shutter LASER close 11:12:56 Received message from Master: op=PointingHead serial=62922 11:12:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:12:56 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:12:56 Point started: ret=0 11:12:56 point_skyscan result=0 11:12:57 Check angles 11:12:57 SkyScan query 11:12:57 SkyScan query done: ret=0 az=89.895<-5993 ze=157.17<-1522 Statuses=0009 0009 11:12:57 Msec=0 True Az=89.895 Ze=157.17 Az status=0009 Ze status=0009 11:12:57 Check angles 11:12:57 SkyScan query 11:12:58 SkyScan query done: ret=0 az=72.315<-4821 ze=136.2<-2920 Statuses=0009 0009 11:12:58 Msec=750 True Az=72.315 Ze=136.2 Az status=0009 Ze status=0009 11:12:58 Check angles 11:12:58 SkyScan query 11:12:59 SkyScan query done: ret=0 az=55.02<-3668 ze=115.305<-4313 Statuses=0009 0009 11:12:59 Msec=1500 True Az=55.02 Ze=115.305 Az status=0009 Ze status=0009 11:12:59 Check angles 11:12:59 SkyScan query 11:12:59 SkyScan query done: ret=0 az=40.875<-2725 ze=94.305<-5713 Statuses=0009 0009 11:12:59 Msec=2250 True Az=40.875 Ze=94.305 Az status=0009 Ze status=0009 11:13:00 Check angles 11:13:00 SkyScan query 11:13:00 SkyScan query done: ret=0 az=40.995<-2733 ze=73.365<-7109 Statuses=0008 0009 11:13:00 Msec=3000 True Az=40.995 Ze=73.365 Az status=0008 Ze status=0009 11:13:00 Check angles 11:13:00 SkyScan query 11:13:01 SkyScan query done: ret=0 az=40.995<-2733 ze=52.8<-8480 Statuses=0008 0009 11:13:01 Msec=3750 True Az=40.995 Ze=52.8 Az status=0008 Ze status=0009 11:13:01 Check angles 11:13:01 SkyScan query 11:13:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:13:02 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:13:02 Message to Master queued w/err=0: serial=62922 error=0 11:13:07 Received message from Master: op=Filter serial=62923 11:13:07 Color wheel filter change from 0 to 0 11:13:07 FLIGetFilterPos err=0 currentPosition=0 11:13:07 FLIGetStepsRemaining err=0 RemainingSteps=0 11:13:07 Filter is already there-color wheel unchanged 11:13:07 Received message from Master: op=Shutter serial=62924 11:13:07 Shutter LASER close 11:13:07 Received message from Camera: op=State serial=62926 11:13:07 GetSingleValue result=40 Value=cccccccc 11:13:07 SkyScan query 11:13:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:13:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:08 Parameters OK 11:13:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:08 Set A/D data flow result=40 11:13:08 Set A/D channel type result=40 11:13:08 Set A/D encoding result=40 11:13:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:08 Set channel filter=0.000000e+000 result=40 11:13:08 Config A/D Result=40 11:13:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:08 Get A/D filter: -9.255963e+061 result=40 11:13:08 Get A/D value=-858993460 result=40 11:13:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:08 Parameters OK 11:13:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:08 Set A/D data flow result=40 11:13:08 Set A/D channel type result=40 11:13:08 Set A/D encoding result=40 11:13:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:08 Set channel filter=0.000000e+000 result=40 11:13:08 Config A/D Result=40 11:13:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:08 Get A/D filter: -9.255963e+061 result=40 11:13:08 Get A/D value=-858993460 result=40 11:13:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:13:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:13:08 Aux= 11:13:08 Message to Camera, serial 62926 queued 11:13:45 Received message from Master: op=PointingHead serial=62939 11:13:45 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:13:45 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:13:45 Point started: ret=0 11:13:45 point_skyscan result=0 11:13:46 Check angles 11:13:46 SkyScan query 11:13:46 SkyScan query done: ret=0 az=64.44<-4296 ze=66.555<-7563 Statuses=0009 0008 11:13:46 Msec=0 True Az=64.44 Ze=66.555 Az status=0009 Ze status=0008 11:13:46 Check angles 11:13:46 SkyScan query 11:13:47 SkyScan query done: ret=0 az=81.78<-5452 ze=66.51<-7566 Statuses=0009 0008 11:13:47 Msec=750 True Az=81.78 Ze=66.51 Az status=0009 Ze status=0008 11:13:47 Check angles 11:13:47 SkyScan query 11:13:48 SkyScan query done: ret=0 az=99.375<-6625 ze=66.495<-7567 Statuses=0009 0008 11:13:48 Msec=1500 True Az=99.375 Ze=66.495 Az status=0009 Ze status=0008 11:13:48 Check angles 11:13:48 SkyScan query 11:13:48 SkyScan query done: ret=0 az=116.94<-7796 ze=66.495<-7567 Statuses=0009 0008 11:13:48 Msec=2250 True Az=116.94 Ze=66.495 Az status=0009 Ze status=0008 11:13:49 Check angles 11:13:49 SkyScan query 11:13:49 SkyScan query done: ret=0 az=134.385<-8959 ze=66.495<-7567 Statuses=0009 0008 11:13:49 Msec=3000 True Az=134.385 Ze=66.495 Az status=0009 Ze status=0008 11:13:49 Check angles 11:13:49 SkyScan query 11:13:50 SkyScan query done: ret=0 az=152.19<-10146 ze=66.495<-7567 Statuses=0009 0008 11:13:50 Msec=3750 True Az=152.19 Ze=66.495 Az status=0009 Ze status=0008 11:13:50 Check angles 11:13:50 SkyScan query 11:13:51 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:13:51 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 11:13:51 Message to Master queued w/err=0: serial=62939 error=0 11:13:56 Received message from Master: op=Filter serial=62940 11:13:56 Color wheel filter change from 0 to 0 11:13:56 FLIGetFilterPos err=0 currentPosition=0 11:13:56 FLIGetStepsRemaining err=0 RemainingSteps=0 11:13:56 Filter is already there-color wheel unchanged 11:13:56 Received message from Master: op=Shutter serial=62941 11:13:56 Shutter LASER close 11:13:56 Received message from Camera: op=State serial=62943 11:13:56 GetSingleValue result=40 Value=cccccccc 11:13:56 SkyScan query 11:13:57 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:13:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:57 Parameters OK 11:13:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:57 Set A/D data flow result=40 11:13:57 Set A/D channel type result=40 11:13:57 Set A/D encoding result=40 11:13:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:57 Set channel filter=0.000000e+000 result=40 11:13:57 Config A/D Result=40 11:13:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:57 Get A/D filter: -9.255963e+061 result=40 11:13:57 Get A/D value=-858993460 result=40 11:13:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:57 Parameters OK 11:13:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:57 Set A/D data flow result=40 11:13:57 Set A/D channel type result=40 11:13:57 Set A/D encoding result=40 11:13:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:57 Set channel filter=0.000000e+000 result=40 11:13:57 Config A/D Result=40 11:13:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:57 Get A/D filter: -9.255963e+061 result=40 11:13:57 Get A/D value=-858993460 result=40 11:13:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:57 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:13:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:13:57 Aux= 11:13:57 Message to Camera, serial 62943 queued 11:14:33 Received message from Master: op=PointingHead serial=62956 11:14:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:14:33 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:14:34 Point started: ret=0 11:14:34 point_skyscan result=0 11:14:34 Check angles 11:14:34 SkyScan query 11:14:35 SkyScan query done: ret=0 az=135.24<-9016 ze=36.915<-9539 Statuses=0009 0009 11:14:35 Msec=0 True Az=135.24 Ze=36.915 Az status=0009 Ze status=0009 11:14:35 Check angles 11:14:35 SkyScan query 11:14:36 SkyScan query done: ret=0 az=117.66<-7844 ze=15.99<-10934 Statuses=0009 0009 11:14:36 Msec=750 True Az=117.66 Ze=15.99 Az status=0009 Ze status=0009 11:14:36 Check angles 11:14:36 SkyScan query 11:14:37 SkyScan query done: ret=0 az=100.035<-6669 ze=-5.37<-12358 Statuses=0009 0009 11:14:37 Msec=1500 True Az=100.035 Ze=-5.37 Az status=0009 Ze status=0009 11:14:37 Check angles 11:14:37 SkyScan query 11:14:37 SkyScan query done: ret=0 az=82.5<-5500 ze=-26.31<-13754 Statuses=0009 0009 11:14:37 Msec=2250 True Az=82.5 Ze=-26.31 Az status=0009 Ze status=0009 11:14:37 Check angles 11:14:37 SkyScan query 11:14:38 SkyScan query done: ret=0 az=65.01<-4334 ze=-38.565<-14571 Statuses=0009 0008 11:14:38 Msec=3000 True Az=65.01 Ze=-38.565 Az status=0009 Ze status=0008 11:14:38 Check angles 11:14:38 SkyScan query 11:14:39 SkyScan query done: ret=0 az=47.52<-3168 ze=-38.535<-14569 Statuses=0009 0008 11:14:39 Msec=3750 True Az=47.52 Ze=-38.535 Az status=0009 Ze status=0008 11:14:39 Check angles 11:14:39 SkyScan query 11:14:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:14:40 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:14:40 Message to Master queued w/err=0: serial=62956 error=0 11:14:45 Received message from Master: op=Filter serial=62957 11:14:45 Color wheel filter change from 0 to 0 11:14:45 FLIGetFilterPos err=0 currentPosition=0 11:14:45 FLIGetStepsRemaining err=0 RemainingSteps=0 11:14:45 Filter is already there-color wheel unchanged 11:14:45 Received message from Master: op=Shutter serial=62958 11:14:45 Shutter LASER close 11:14:45 Received message from Camera: op=State serial=62960 11:14:45 GetSingleValue result=40 Value=cccccccc 11:14:45 SkyScan query 11:14:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:14:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:45 Parameters OK 11:14:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:45 Set A/D data flow result=40 11:14:45 Set A/D channel type result=40 11:14:45 Set A/D encoding result=40 11:14:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:45 Set channel filter=0.000000e+000 result=40 11:14:45 Config A/D Result=40 11:14:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:45 Get A/D filter: -9.255963e+061 result=40 11:14:45 Get A/D value=-858993460 result=40 11:14:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:45 Parameters OK 11:14:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:45 Set A/D data flow result=40 11:14:45 Set A/D channel type result=40 11:14:45 Set A/D encoding result=40 11:14:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:45 Set channel filter=0.000000e+000 result=40 11:14:45 Config A/D Result=40 11:14:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:45 Get A/D filter: -9.255963e+061 result=40 11:14:45 Get A/D value=-858993460 result=40 11:14:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:14:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:14:45 Aux= 11:14:45 Message to Camera, serial 62960 queued 11:15:22 Received message from Master: op=PointingHead serial=62973 11:15:22 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:15:22 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:15:23 Point started: ret=0 11:15:23 point_skyscan result=0 11:15:23 Check angles 11:15:23 SkyScan query 11:15:24 SkyScan query done: ret=0 az=63.75<-4250 ze=-67.995<-16533 Statuses=0009 0009 11:15:24 Msec=0 True Az=63.75 Ze=-67.995 Az status=0009 Ze status=0009 11:15:24 Check angles 11:15:24 SkyScan query 11:15:25 SkyScan query done: ret=0 az=81.105<-5407 ze=-88.995<-17933 Statuses=0009 0009 11:15:25 Msec=750 True Az=81.105 Ze=-88.995 Az status=0009 Ze status=0009 11:15:25 Check angles 11:15:25 SkyScan query 11:15:25 SkyScan query done: ret=0 az=98.625<-6575 ze=-109.905<-19327 Statuses=0009 0009 11:15:25 Msec=1500 True Az=98.625 Ze=-109.905 Az status=0009 Ze status=0009 11:15:26 Check angles 11:15:26 SkyScan query 11:15:26 SkyScan query done: ret=0 az=116.34<-7756 ze=-130.86<-20724 Statuses=0009 0009 11:15:26 Msec=2250 True Az=116.34 Ze=-130.86 Az status=0009 Ze status=0009 11:15:26 Check angles 11:15:26 SkyScan query 11:15:27 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 11:15:27 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 11:15:27 Check angles 11:15:27 SkyScan query 11:15:28 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:15:28 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:15:28 Message to Master queued w/err=0: serial=62973 error=0 11:15:29 Received message from Master: op=Identify serial=62974 11:15:33 Received message from Master: op=Filter serial=62977 11:15:33 Color wheel filter change from 0 to 0 11:15:33 FLIGetFilterPos err=0 currentPosition=0 11:15:33 FLIGetStepsRemaining err=0 RemainingSteps=0 11:15:33 Filter is already there-color wheel unchanged 11:15:33 Received message from Master: op=Shutter serial=62978 11:15:33 Shutter LASER close 11:15:33 Received message from Camera: op=State serial=62980 11:15:33 GetSingleValue result=40 Value=cccccccc 11:15:33 SkyScan query 11:15:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:15:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:33 Parameters OK 11:15:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:33 Set A/D data flow result=40 11:15:33 Set A/D channel type result=40 11:15:33 Set A/D encoding result=40 11:15:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:33 Set channel filter=0.000000e+000 result=40 11:15:33 Config A/D Result=40 11:15:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:33 Get A/D filter: -9.255963e+061 result=40 11:15:33 Get A/D value=-858993460 result=40 11:15:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:33 Parameters OK 11:15:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:33 Set A/D data flow result=40 11:15:33 Set A/D channel type result=40 11:15:33 Set A/D encoding result=40 11:15:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:33 Set channel filter=0.000000e+000 result=40 11:15:33 Config A/D Result=40 11:15:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:33 Get A/D filter: -9.255963e+061 result=40 11:15:33 Get A/D value=-858993460 result=40 [UTC 2018-12-11 11:15:33] 11:15:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:33 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:15:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:15:33 Aux= 11:15:33 Message to Camera, serial 62980 queued [UTC 2018-12-11 11:15:54] 11:16:09 Received message from Master: op=PointingHead serial=62992 11:16:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:16:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:16:10 Point started: ret=0 11:16:10 point_skyscan result=0 11:16:10 Check angles 11:16:10 SkyScan query 11:16:11 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.42<-23428 Statuses=0009 0009 11:16:11 Msec=0 True Az=113.01 Ze=-171.42 Az status=0009 Ze status=0009 11:16:11 Check angles 11:16:11 SkyScan query 11:16:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:16:12 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:16:12 Message to Master queued w/err=0: serial=62992 error=0 11:16:17 Received message from Master: op=Filter serial=62993 11:16:17 Color wheel filter change from 0 to 0 11:16:17 FLIGetFilterPos err=0 currentPosition=0 11:16:17 FLIGetStepsRemaining err=0 RemainingSteps=0 11:16:17 Filter is already there-color wheel unchanged 11:16:17 Received message from Master: op=Shutter serial=62994 11:16:17 Shutter LASER open 11:16:17 Received message from Camera: op=State serial=62996 11:16:17 GetSingleValue result=40 Value=cccccccc 11:16:17 SkyScan query 11:16:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:16:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:18 Parameters OK 11:16:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:18 Set A/D data flow result=40 11:16:18 Set A/D channel type result=40 11:16:18 Set A/D encoding result=40 11:16:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:18 Set channel filter=0.000000e+000 result=40 11:16:18 Config A/D Result=40 11:16:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:18 Get A/D filter: -9.255963e+061 result=40 11:16:18 Get A/D value=-858993460 result=40 11:16:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:18 Parameters OK 11:16:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:18 Set A/D data flow result=40 11:16:18 Set A/D channel type result=40 11:16:18 Set A/D encoding result=40 11:16:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:18 Set channel filter=0.000000e+000 result=40 11:16:18 Config A/D Result=40 11:16:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:18 Get A/D filter: -9.255963e+061 result=40 11:16:18 Get A/D value=-858993460 result=40 11:16:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:16:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:16:18 Aux= 11:16:18 Message to Camera, serial 62996 queued 11:16:26 Received message from Master: op=Shutter serial=63006 11:16:26 Shutter LASER close 11:16:27 Received message from Master: op=PointingHead serial=63010 11:16:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:16:27 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:16:27 Point started: ret=0 11:16:27 point_skyscan result=0 11:16:28 Check angles 11:16:28 SkyScan query 11:16:28 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.355<-21557 Statuses=0009 0009 11:16:28 Msec=0 True Az=135.825 Ze=-143.355 Az status=0009 Ze status=0009 11:16:29 Check angles 11:16:29 SkyScan query 11:16:29 SkyScan query done: ret=0 az=153.705<-10247 ze=-121.92<-20128 Statuses=0009 0009 11:16:29 Msec=750 True Az=153.705 Ze=-121.92 Az status=0009 Ze status=0009 11:16:29 Check angles 11:16:29 SkyScan query 11:16:30 SkyScan query done: ret=0 az=171.48<-11432 ze=-100.515<-18701 Statuses=0009 0009 11:16:30 Msec=1500 True Az=171.48 Ze=-100.515 Az status=0009 Ze status=0009 11:16:30 Check angles 11:16:30 SkyScan query 11:16:31 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.62<-17308 Statuses=0008 0009 11:16:31 Msec=2250 True Az=176.025 Ze=-79.62 Az status=0008 Ze status=0009 11:16:31 Check angles 11:16:31 SkyScan query 11:16:31 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.62<-15908 Statuses=0008 0009 11:16:31 Msec=3000 True Az=176.01 Ze=-58.62 Az status=0008 Ze status=0009 11:16:32 Check angles 11:16:32 SkyScan query 11:16:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 11:16:32 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 11:16:32 Message to Master queued w/err=0: serial=63010 error=0 11:16:37 Received message from Master: op=Filter serial=63011 11:16:37 Color wheel filter change from 0 to 0 11:16:37 FLIGetFilterPos err=0 currentPosition=0 11:16:37 FLIGetStepsRemaining err=0 RemainingSteps=0 11:16:37 Filter is already there-color wheel unchanged 11:16:37 Received message from Master: op=Shutter serial=63012 11:16:37 Shutter LASER close 11:16:38 Received message from Camera: op=State serial=63014 11:16:38 GetSingleValue result=40 Value=cccccccc 11:16:38 SkyScan query 11:16:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:16:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:38 Parameters OK 11:16:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:38 Set A/D data flow result=40 11:16:38 Set A/D channel type result=40 11:16:38 Set A/D encoding result=40 11:16:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:38 Set channel filter=0.000000e+000 result=40 11:16:38 Config A/D Result=40 11:16:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:38 Get A/D filter: -9.255963e+061 result=40 11:16:38 Get A/D value=-858993460 result=40 11:16:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:38 Parameters OK 11:16:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:38 Set A/D data flow result=40 11:16:38 Set A/D channel type result=40 11:16:38 Set A/D encoding result=40 11:16:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:38 Set channel filter=0.000000e+000 result=40 11:16:38 Config A/D Result=40 11:16:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:38 Get A/D filter: -9.255963e+061 result=40 11:16:38 Get A/D value=-858993460 result=40 11:16:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:16:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:16:38 Aux= 11:16:38 Message to Camera, serial 63014 queued 11:17:15 Received message from Master: op=PointingHead serial=63027 11:17:15 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:17:15 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:17:15 Point started: ret=0 11:17:15 point_skyscan result=0 11:17:16 Check angles 11:17:16 SkyScan query 11:17:17 SkyScan query done: ret=0 az=152.805<-10187 ze=-21.735<-13449 Statuses=0009 0009 11:17:17 Msec=0 True Az=152.805 Ze=-21.735 Az status=0009 Ze status=0009 11:17:17 Check angles 11:17:17 SkyScan query 11:17:17 SkyScan query done: ret=0 az=135.315<-9021 ze=-0.705<-12047 Statuses=0009 0009 11:17:17 Msec=750 True Az=135.315 Ze=-0.705 Az status=0009 Ze status=0009 11:17:18 Check angles 11:17:18 SkyScan query 11:17:18 SkyScan query done: ret=0 az=117.36<-7824 ze=20.655<-10623 Statuses=0009 0009 11:17:18 Msec=1500 True Az=117.36 Ze=20.655 Az status=0009 Ze status=0009 11:17:18 Check angles 11:17:18 SkyScan query 11:17:19 SkyScan query done: ret=0 az=99.93<-6662 ze=41.64<-9224 Statuses=0009 0009 11:17:19 Msec=2250 True Az=99.93 Ze=41.64 Az status=0009 Ze status=0009 11:17:19 Check angles 11:17:19 SkyScan query 11:17:20 SkyScan query done: ret=0 az=86.07<-5738 ze=51.555<-8563 Statuses=0009 0008 11:17:20 Msec=3000 True Az=86.07 Ze=51.555 Az status=0009 Ze status=0008 11:17:20 Check angles 11:17:20 SkyScan query 11:17:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:17:20 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:17:20 Message to Master queued w/err=0: serial=63027 error=0 11:17:25 Received message from Master: op=Filter serial=63028 11:17:25 Color wheel filter change from 0 to 0 11:17:25 FLIGetFilterPos err=0 currentPosition=0 11:17:25 FLIGetStepsRemaining err=0 RemainingSteps=0 11:17:25 Filter is already there-color wheel unchanged 11:17:26 Received message from Master: op=Shutter serial=63029 11:17:26 Shutter LASER close 11:17:26 Received message from Camera: op=State serial=63031 11:17:26 GetSingleValue result=40 Value=cccccccc 11:17:26 SkyScan query 11:17:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:17:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:26 Parameters OK 11:17:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:26 Set A/D data flow result=40 11:17:26 Set A/D channel type result=40 11:17:26 Set A/D encoding result=40 11:17:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:26 Set channel filter=0.000000e+000 result=40 11:17:26 Config A/D Result=40 11:17:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:26 Get A/D filter: -9.255963e+061 result=40 11:17:26 Get A/D value=-858993460 result=40 11:17:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:26 Parameters OK 11:17:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:26 Set A/D data flow result=40 11:17:26 Set A/D channel type result=40 11:17:26 Set A/D encoding result=40 11:17:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:26 Set channel filter=0.000000e+000 result=40 11:17:26 Config A/D Result=40 11:17:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:26 Get A/D filter: -9.255963e+061 result=40 11:17:26 Get A/D value=-858993460 result=40 11:17:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:17:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:17:26 Aux= 11:17:26 Message to Camera, serial 63031 queued 11:18:03 Received message from Master: op=PointingHead serial=63044 11:18:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:18:03 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:18:03 Point started: ret=0 11:18:03 point_skyscan result=0 11:18:04 Check angles 11:18:04 SkyScan query 11:18:05 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 11:18:05 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 11:18:05 Check angles 11:18:05 SkyScan query 11:18:05 SkyScan query done: ret=0 az=126.795<-8453 ze=38.505<-9433 Statuses=0009 0008 11:18:05 Msec=750 True Az=126.795 Ze=38.505 Az status=0009 Ze status=0008 11:18:06 Check angles 11:18:06 SkyScan query 11:18:06 SkyScan query done: ret=0 az=144.615<-9641 ze=38.505<-9433 Statuses=0009 0008 11:18:06 Msec=1500 True Az=144.615 Ze=38.505 Az status=0009 Ze status=0008 11:18:06 Check angles 11:18:06 SkyScan query 11:18:07 SkyScan query done: ret=0 az=162.03<-10802 ze=38.505<-9433 Statuses=0009 0008 11:18:07 Msec=2250 True Az=162.03 Ze=38.505 Az status=0009 Ze status=0008 11:18:07 Check angles 11:18:07 SkyScan query 11:18:08 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:18:08 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:18:08 Check angles 11:18:08 SkyScan query 11:18:08 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:18:08 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:18:08 Message to Master queued w/err=0: serial=63044 error=0 11:18:13 Received message from Master: op=Filter serial=63045 11:18:13 Color wheel filter change from 0 to 0 11:18:13 FLIGetFilterPos err=0 currentPosition=0 11:18:13 FLIGetStepsRemaining err=0 RemainingSteps=0 11:18:13 Filter is already there-color wheel unchanged 11:18:14 Received message from Master: op=Shutter serial=63046 11:18:14 Shutter LASER close 11:18:14 Received message from Camera: op=State serial=63048 11:18:14 GetSingleValue result=40 Value=cccccccc 11:18:14 SkyScan query 11:18:14 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:18:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:14 Parameters OK 11:18:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:14 Set A/D data flow result=40 11:18:14 Set A/D channel type result=40 11:18:14 Set A/D encoding result=40 11:18:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:14 Set channel filter=0.000000e+000 result=40 11:18:14 Config A/D Result=40 11:18:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:14 Get A/D filter: -9.255963e+061 result=40 11:18:14 Get A/D value=-858993460 result=40 11:18:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:14 Parameters OK 11:18:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:14 Set A/D data flow result=40 11:18:14 Set A/D channel type result=40 11:18:14 Set A/D encoding result=40 11:18:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:14 Set channel filter=0.000000e+000 result=40 11:18:14 Config A/D Result=40 11:18:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:14 Get A/D filter: -9.255963e+061 result=40 11:18:14 Get A/D value=-858993460 result=40 11:18:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:18:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:18:14 Aux= 11:18:14 Message to Camera, serial 63048 queued 11:18:51 Received message from Master: op=PointingHead serial=63061 11:18:51 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:18:51 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:18:51 Point started: ret=0 11:18:51 point_skyscan result=0 11:18:52 Check angles 11:18:52 SkyScan query 11:18:53 SkyScan query done: ret=0 az=152.97<-10198 ze=8.685<-11421 Statuses=0009 0009 11:18:53 Msec=0 True Az=152.97 Ze=8.685 Az status=0009 Ze status=0009 11:18:53 Check angles 11:18:53 SkyScan query 11:18:54 SkyScan query done: ret=0 az=135.21<-9014 ze=-12.66<-12844 Statuses=0009 0009 11:18:54 Msec=750 True Az=135.21 Ze=-12.66 Az status=0009 Ze status=0009 11:18:54 Check angles 11:18:54 SkyScan query 11:18:54 SkyScan query done: ret=0 az=117.555<-7837 ze=-33.63<-14242 Statuses=0009 0009 11:18:54 Msec=1500 True Az=117.555 Ze=-33.63 Az status=0009 Ze status=0009 11:18:54 Check angles 11:18:54 SkyScan query 11:18:55 SkyScan query done: ret=0 az=100.17<-6678 ze=-51.555<-15437 Statuses=0009 0009 11:18:55 Msec=2250 True Az=100.17 Ze=-51.555 Az status=0009 Ze status=0009 11:18:55 Check angles 11:18:55 SkyScan query 11:18:56 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.525<-15435 Statuses=0009 0008 11:18:56 Msec=3000 True Az=86.055 Ze=-51.525 Az status=0009 Ze status=0008 11:18:56 Check angles 11:18:56 SkyScan query 11:18:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:18:57 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:18:57 Message to Master queued w/err=0: serial=63061 error=0 11:19:02 Received message from Master: op=Filter serial=63062 11:19:02 Color wheel filter change from 0 to 0 11:19:02 FLIGetFilterPos err=0 currentPosition=0 11:19:02 FLIGetStepsRemaining err=0 RemainingSteps=0 11:19:02 Filter is already there-color wheel unchanged 11:19:02 Received message from Master: op=Shutter serial=63063 11:19:02 Shutter LASER close 11:19:02 Received message from Camera: op=State serial=63065 11:19:02 GetSingleValue result=40 Value=cccccccc 11:19:02 SkyScan query 11:19:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:19:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:02 Parameters OK 11:19:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:02 Set A/D data flow result=40 11:19:02 Set A/D channel type result=40 11:19:02 Set A/D encoding result=40 11:19:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:02 Set channel filter=0.000000e+000 result=40 11:19:02 Config A/D Result=40 11:19:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:02 Get A/D filter: -9.255963e+061 result=40 11:19:02 Get A/D value=-858993460 result=40 11:19:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:02 Parameters OK 11:19:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:02 Set A/D data flow result=40 11:19:02 Set A/D channel type result=40 11:19:02 Set A/D encoding result=40 11:19:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:02 Set channel filter=0.000000e+000 result=40 11:19:02 Config A/D Result=40 11:19:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:02 Get A/D filter: -9.255963e+061 result=40 11:19:02 Get A/D value=-858993460 result=40 11:19:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:19:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:19:02 Aux= 11:19:02 Message to Camera, serial 63065 queued 11:19:39 Received message from Master: op=PointingHead serial=63078 11:19:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:19:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:19:40 Point started: ret=0 11:19:40 point_skyscan result=0 11:19:40 Check angles 11:19:40 SkyScan query 11:19:41 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.03<-17402 Statuses=0009 0009 11:19:41 Msec=0 True Az=108.795 Ze=-81.03 Az status=0009 Ze status=0009 11:19:41 Check angles 11:19:41 SkyScan query 11:19:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.435<-18829 Statuses=0008 0009 11:19:42 Msec=750 True Az=112.995 Ze=-102.435 Az status=0008 Ze status=0009 11:19:42 Check angles 11:19:42 SkyScan query 11:19:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.84<-20256 Statuses=0008 0009 11:19:42 Msec=1500 True Az=112.995 Ze=-123.84 Az status=0008 Ze status=0009 11:19:43 Check angles 11:19:43 SkyScan query 11:19:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.78<-21652 Statuses=0008 0009 11:19:43 Msec=2250 True Az=112.995 Ze=-144.78 Az status=0008 Ze status=0009 11:19:43 Check angles 11:19:43 SkyScan query 11:19:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.735<-23049 Statuses=0008 0009 11:19:44 Msec=3000 True Az=112.995 Ze=-165.735 Az status=0008 Ze status=0009 11:19:44 Check angles 11:19:44 SkyScan query 11:19:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:19:45 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:19:45 Message to Master queued w/err=0: serial=63078 error=0 11:19:50 Received message from Master: op=Filter serial=63079 11:19:50 Color wheel filter change from 0 to 0 11:19:50 FLIGetFilterPos err=0 currentPosition=0 11:19:50 FLIGetStepsRemaining err=0 RemainingSteps=0 11:19:50 Filter is already there-color wheel unchanged 11:19:50 Received message from Master: op=Shutter serial=63080 11:19:50 Shutter LASER open 11:19:50 Received message from Camera: op=State serial=63082 11:19:50 GetSingleValue result=40 Value=cccccccc 11:19:50 SkyScan query 11:19:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:19:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:51 Parameters OK 11:19:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:51 Set A/D data flow result=40 11:19:51 Set A/D channel type result=40 11:19:51 Set A/D encoding result=40 11:19:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:51 Set channel filter=0.000000e+000 result=40 11:19:51 Config A/D Result=40 11:19:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:51 Get A/D filter: -9.255963e+061 result=40 11:19:51 Get A/D value=-858993460 result=40 11:19:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:51 Parameters OK 11:19:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:51 Set A/D data flow result=40 11:19:51 Set A/D channel type result=40 11:19:51 Set A/D encoding result=40 11:19:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:51 Set channel filter=0.000000e+000 result=40 11:19:51 Config A/D Result=40 11:19:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:51 Get A/D filter: -9.255963e+061 result=40 11:19:51 Get A/D value=-858993460 result=40 11:19:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:19:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:19:51 Aux= 11:19:51 Message to Camera, serial 63082 queued 11:19:59 Received message from Master: op=Shutter serial=63092 11:19:59 Shutter LASER close 11:20:00 Received message from Master: op=PointingHead serial=63096 11:20:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:20:00 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:20:00 Point started: ret=0 11:20:00 point_skyscan result=0 11:20:01 Check angles 11:20:01 SkyScan query 11:20:01 SkyScan query done: ret=0 az=89.895<-5993 ze=157.26<-1516 Statuses=0009 0009 11:20:01 Msec=0 True Az=89.895 Ze=157.26 Az status=0009 Ze status=0009 11:20:01 Check angles 11:20:01 SkyScan query 11:20:02 SkyScan query done: ret=0 az=72.33<-4822 ze=136.26<-2916 Statuses=0009 0009 11:20:02 Msec=750 True Az=72.33 Ze=136.26 Az status=0009 Ze status=0009 11:20:02 Check angles 11:20:02 SkyScan query 11:20:03 SkyScan query done: ret=0 az=55.02<-3668 ze=115.365<-4309 Statuses=0009 0009 11:20:03 Msec=1500 True Az=55.02 Ze=115.365 Az status=0009 Ze status=0009 11:20:03 Check angles 11:20:03 SkyScan query 11:20:03 SkyScan query done: ret=0 az=40.875<-2725 ze=94.35<-5710 Statuses=0009 0009 11:20:03 Msec=2250 True Az=40.875 Ze=94.35 Az status=0009 Ze status=0009 11:20:04 Check angles 11:20:04 SkyScan query 11:20:04 SkyScan query done: ret=0 az=40.995<-2733 ze=73.44<-7104 Statuses=0008 0009 11:20:04 Msec=3000 True Az=40.995 Ze=73.44 Az status=0008 Ze status=0009 11:20:04 Check angles 11:20:04 SkyScan query 11:20:05 SkyScan query done: ret=0 az=40.995<-2733 ze=52.845<-8477 Statuses=0008 0009 11:20:05 Msec=3750 True Az=40.995 Ze=52.845 Az status=0008 Ze status=0009 11:20:05 Check angles 11:20:05 SkyScan query 11:20:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:20:06 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:20:06 Message to Master queued w/err=0: serial=63096 error=0 11:20:11 Received message from Master: op=Filter serial=63097 11:20:11 Color wheel filter change from 0 to 0 11:20:11 FLIGetFilterPos err=0 currentPosition=0 11:20:11 FLIGetStepsRemaining err=0 RemainingSteps=0 11:20:11 Filter is already there-color wheel unchanged 11:20:11 Received message from Master: op=Shutter serial=63098 11:20:11 Shutter LASER close 11:20:11 Received message from Camera: op=State serial=63100 11:20:11 GetSingleValue result=40 Value=cccccccc 11:20:11 SkyScan query 11:20:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:20:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:12 Parameters OK 11:20:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:12 Set A/D data flow result=40 11:20:12 Set A/D channel type result=40 11:20:12 Set A/D encoding result=40 11:20:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:12 Set channel filter=0.000000e+000 result=40 11:20:12 Config A/D Result=40 11:20:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:12 Get A/D filter: -9.255963e+061 result=40 11:20:12 Get A/D value=-858993460 result=40 11:20:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:12 Parameters OK 11:20:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:12 Set A/D data flow result=40 11:20:12 Set A/D channel type result=40 11:20:12 Set A/D encoding result=40 11:20:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:12 Set channel filter=0.000000e+000 result=40 11:20:12 Config A/D Result=40 11:20:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:12 Get A/D filter: -9.255963e+061 result=40 11:20:12 Get A/D value=-858993460 result=40 11:20:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:20:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:20:12 Aux= 11:20:12 Message to Camera, serial 63100 queued 11:20:48 Received message from Master: op=PointingHead serial=63113 11:20:48 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:20:48 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:20:49 Point started: ret=0 11:20:49 point_skyscan result=0 11:20:50 Check angles 11:20:50 SkyScan query 11:20:50 SkyScan query done: ret=0 az=63.75<-4250 ze=66.555<-7563 Statuses=0009 0008 11:20:50 Msec=0 True Az=63.75 Ze=66.555 Az status=0009 Ze status=0008 11:20:50 Check angles 11:20:50 SkyScan query 11:20:51 SkyScan query done: ret=0 az=81.105<-5407 ze=66.495<-7567 Statuses=0009 0008 11:20:51 Msec=750 True Az=81.105 Ze=66.495 Az status=0009 Ze status=0008 11:20:51 Check angles 11:20:51 SkyScan query 11:20:52 SkyScan query done: ret=0 az=99.105<-6607 ze=66.495<-7567 Statuses=0009 0008 11:20:52 Msec=1500 True Az=99.105 Ze=66.495 Az status=0009 Ze status=0008 11:20:52 Check angles 11:20:52 SkyScan query 11:20:52 SkyScan query done: ret=0 az=116.985<-7799 ze=66.495<-7567 Statuses=0009 0008 11:20:52 Msec=2250 True Az=116.985 Ze=66.495 Az status=0009 Ze status=0008 11:20:53 Check angles 11:20:53 SkyScan query 11:20:53 SkyScan query done: ret=0 az=134.43<-8962 ze=66.495<-7567 Statuses=0009 0008 11:20:53 Msec=3000 True Az=134.43 Ze=66.495 Az status=0009 Ze status=0008 11:20:53 Check angles 11:20:53 SkyScan query 11:20:54 SkyScan query done: ret=0 az=151.905<-10127 ze=66.495<-7567 Statuses=0009 0008 11:20:54 Msec=3750 True Az=151.905 Ze=66.495 Az status=0009 Ze status=0008 11:20:54 Check angles 11:20:54 SkyScan query 11:20:55 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:20:55 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 11:20:55 Message to Master queued w/err=0: serial=63113 error=0 11:21:00 Received message from Master: op=Filter serial=63114 11:21:00 Color wheel filter change from 0 to 0 11:21:00 FLIGetFilterPos err=0 currentPosition=0 11:21:00 FLIGetStepsRemaining err=0 RemainingSteps=0 11:21:00 Filter is already there-color wheel unchanged 11:21:00 Received message from Master: op=Shutter serial=63115 11:21:00 Shutter LASER close 11:21:00 Received message from Camera: op=State serial=63117 11:21:00 GetSingleValue result=40 Value=cccccccc 11:21:00 SkyScan query 11:21:00 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:21:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:00 Parameters OK 11:21:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:00 Set A/D data flow result=40 11:21:00 Set A/D channel type result=40 11:21:00 Set A/D encoding result=40 11:21:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:00 Set channel filter=0.000000e+000 result=40 11:21:00 Config A/D Result=40 11:21:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:00 Get A/D filter: -9.255963e+061 result=40 11:21:00 Get A/D value=-858993460 result=40 11:21:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:00 Parameters OK 11:21:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:00 Set A/D data flow result=40 11:21:00 Set A/D channel type result=40 11:21:00 Set A/D encoding result=40 11:21:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:00 Set channel filter=0.000000e+000 result=40 11:21:00 Config A/D Result=40 11:21:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:00 Get A/D filter: -9.255963e+061 result=40 11:21:00 Get A/D value=-858993460 result=40 11:21:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:00 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:21:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:21:00 Aux= 11:21:00 Message to Camera, serial 63117 queued 11:21:37 Received message from Master: op=PointingHead serial=63130 11:21:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:21:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:21:38 Point started: ret=0 11:21:38 point_skyscan result=0 11:21:38 Check angles 11:21:38 SkyScan query 11:21:39 SkyScan query done: ret=0 az=134.775<-8985 ze=36.48<-9568 Statuses=0009 0009 11:21:39 Msec=0 True Az=134.775 Ze=36.48 Az status=0009 Ze status=0009 11:21:39 Check angles 11:21:39 SkyScan query 11:21:40 SkyScan query done: ret=0 az=116.91<-7794 ze=15.09<-10994 Statuses=0009 0009 11:21:40 Msec=750 True Az=116.91 Ze=15.09 Az status=0009 Ze status=0009 11:21:40 Check angles 11:21:40 SkyScan query 11:21:40 SkyScan query done: ret=0 az=99.54<-6636 ze=-5.85<-12390 Statuses=0009 0009 11:21:40 Msec=1500 True Az=99.54 Ze=-5.85 Az status=0009 Ze status=0009 11:21:41 Check angles 11:21:41 SkyScan query 11:21:41 SkyScan query done: ret=0 az=82.08<-5472 ze=-26.82<-13788 Statuses=0009 0009 11:21:41 Msec=2250 True Az=82.08 Ze=-26.82 Az status=0009 Ze status=0009 11:21:41 Check angles 11:21:41 SkyScan query 11:21:42 SkyScan query done: ret=0 az=64.545<-4303 ze=-38.565<-14571 Statuses=0009 0008 11:21:42 Msec=3000 True Az=64.545 Ze=-38.565 Az status=0009 Ze status=0008 11:21:42 Check angles 11:21:42 SkyScan query 11:21:43 SkyScan query done: ret=0 az=47.13<-3142 ze=-38.535<-14569 Statuses=0009 0008 11:21:43 Msec=3750 True Az=47.13 Ze=-38.535 Az status=0009 Ze status=0008 11:21:43 Check angles 11:21:43 SkyScan query 11:21:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:21:43 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:21:43 Message to Master queued w/err=0: serial=63130 error=0 11:21:48 Received message from Master: op=Filter serial=63131 11:21:48 Color wheel filter change from 0 to 0 11:21:48 FLIGetFilterPos err=0 currentPosition=0 11:21:48 FLIGetStepsRemaining err=0 RemainingSteps=0 11:21:48 Filter is already there-color wheel unchanged 11:21:49 Received message from Master: op=Shutter serial=63132 11:21:49 Shutter LASER close 11:21:49 Received message from Camera: op=State serial=63134 11:21:49 GetSingleValue result=40 Value=cccccccc 11:21:49 SkyScan query 11:21:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:21:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:49 Parameters OK 11:21:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:49 Set A/D data flow result=40 11:21:49 Set A/D channel type result=40 11:21:49 Set A/D encoding result=40 11:21:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:49 Set channel filter=0.000000e+000 result=40 11:21:49 Config A/D Result=40 11:21:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:49 Get A/D filter: -9.255963e+061 result=40 11:21:49 Get A/D value=-858993460 result=40 11:21:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:49 Parameters OK 11:21:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:49 Set A/D data flow result=40 11:21:49 Set A/D channel type result=40 11:21:49 Set A/D encoding result=40 11:21:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:49 Set channel filter=0.000000e+000 result=40 11:21:49 Config A/D Result=40 11:21:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:49 Get A/D filter: -9.255963e+061 result=40 11:21:49 Get A/D value=-858993460 result=40 11:21:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:21:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:21:49 Aux= 11:21:49 Message to Camera, serial 63134 queued 11:22:26 Received message from Master: op=PointingHead serial=63147 11:22:26 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:22:26 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:22:26 Point started: ret=0 11:22:26 point_skyscan result=0 11:22:27 Check angles 11:22:27 SkyScan query 11:22:28 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.07<-16538 Statuses=0009 0009 11:22:28 Msec=0 True Az=63.825 Ze=-68.07 Az status=0009 Ze status=0009 11:22:28 Check angles 11:22:28 SkyScan query 11:22:29 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.49<-17966 Statuses=0009 0009 11:22:29 Msec=750 True Az=81.57 Ze=-89.49 Az status=0009 Ze status=0009 11:22:29 Check angles 11:22:29 SkyScan query 11:22:29 SkyScan query done: ret=0 az=99.105<-6607 ze=-110.46<-19364 Statuses=0009 0009 11:22:29 Msec=1500 True Az=99.105 Ze=-110.46 Az status=0009 Ze status=0009 11:22:29 Check angles 11:22:29 SkyScan query 11:22:30 SkyScan query done: ret=0 az=116.7<-7780 ze=-131.37<-20758 Statuses=0009 0009 11:22:30 Msec=2250 True Az=116.7 Ze=-131.37 Az status=0009 Ze status=0009 11:22:30 Check angles 11:22:30 SkyScan query 11:22:31 SkyScan query done: ret=0 az=131.19<-8746 ze=-141.54<-21436 Statuses=0009 0008 11:22:31 Msec=3000 True Az=131.19 Ze=-141.54 Az status=0009 Ze status=0008 11:22:31 Check angles 11:22:31 SkyScan query 11:22:32 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:22:32 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:22:32 Message to Master queued w/err=0: serial=63147 error=0 11:22:37 Received message from Master: op=Filter serial=63148 11:22:37 Color wheel filter change from 0 to 0 11:22:37 FLIGetFilterPos err=0 currentPosition=0 11:22:37 FLIGetStepsRemaining err=0 RemainingSteps=0 11:22:37 Filter is already there-color wheel unchanged 11:22:37 Received message from Master: op=Shutter serial=63149 11:22:37 Shutter LASER close 11:22:37 Received message from Camera: op=State serial=63151 11:22:37 GetSingleValue result=40 Value=cccccccc 11:22:37 SkyScan query 11:22:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:22:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:37 Parameters OK 11:22:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:37 Set A/D data flow result=40 11:22:37 Set A/D channel type result=40 11:22:37 Set A/D encoding result=40 11:22:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:37 Set channel filter=0.000000e+000 result=40 11:22:37 Config A/D Result=40 11:22:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:37 Get A/D filter: -9.255963e+061 result=40 11:22:37 Get A/D value=-858993460 result=40 11:22:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:37 Parameters OK 11:22:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:37 Set A/D data flow result=40 11:22:37 Set A/D channel type result=40 11:22:37 Set A/D encoding result=40 11:22:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:37 Set channel filter=0.000000e+000 result=40 11:22:37 Config A/D Result=40 11:22:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:37 Get A/D filter: -9.255963e+061 result=40 11:22:37 Get A/D value=-858993460 result=40 11:22:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:37 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:22:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:22:37 Aux= 11:22:37 Message to Camera, serial 63151 queued 11:23:14 Received message from Master: op=PointingHead serial=63164 11:23:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:23:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:23:15 Point started: ret=0 11:23:15 point_skyscan result=0 11:23:15 Check angles 11:23:15 SkyScan query 11:23:16 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.06<-23404 Statuses=0009 0009 11:23:16 Msec=0 True Az=113.01 Ze=-171.06 Az status=0009 Ze status=0009 11:23:16 Check angles 11:23:16 SkyScan query 11:23:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:23:17 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:23:17 Message to Master queued w/err=0: serial=63164 error=0 11:23:22 Received message from Master: op=Filter serial=63165 11:23:22 Color wheel filter change from 0 to 0 11:23:22 FLIGetFilterPos err=0 currentPosition=0 11:23:22 FLIGetStepsRemaining err=0 RemainingSteps=0 11:23:22 Filter is already there-color wheel unchanged 11:23:22 Received message from Master: op=Shutter serial=63166 11:23:22 Shutter LASER open 11:23:22 Received message from Camera: op=State serial=63168 11:23:22 GetSingleValue result=40 Value=cccccccc 11:23:22 SkyScan query 11:23:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:23:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:23 Parameters OK 11:23:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:23 Set A/D data flow result=40 11:23:23 Set A/D channel type result=40 11:23:23 Set A/D encoding result=40 11:23:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:23 Set channel filter=0.000000e+000 result=40 11:23:23 Config A/D Result=40 11:23:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:23 Get A/D filter: -9.255963e+061 result=40 11:23:23 Get A/D value=-858993460 result=40 11:23:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:23 Parameters OK 11:23:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:23 Set A/D data flow result=40 11:23:23 Set A/D channel type result=40 11:23:23 Set A/D encoding result=40 11:23:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:23 Set channel filter=0.000000e+000 result=40 11:23:23 Config A/D Result=40 11:23:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:23 Get A/D filter: -9.255963e+061 result=40 11:23:23 Get A/D value=-858993460 result=40 11:23:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:23:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:23:23 Aux= 11:23:23 Message to Camera, serial 63168 queued 11:23:31 Received message from Master: op=Shutter serial=63178 11:23:31 Shutter LASER close 11:23:32 Received message from Master: op=PointingHead serial=63182 11:23:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:23:32 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:23:32 Point started: ret=0 11:23:32 point_skyscan result=0 11:23:33 Check angles 11:23:33 SkyScan query 11:23:33 SkyScan query done: ret=0 az=135.78<-9052 ze=-143.49<-21566 Statuses=0009 0009 11:23:33 Msec=0 True Az=135.78 Ze=-143.49 Az status=0009 Ze status=0009 11:23:33 Check angles 11:23:33 SkyScan query 11:23:34 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.505<-20167 Statuses=0009 0009 11:23:34 Msec=750 True Az=153.24 Ze=-122.505 Az status=0009 Ze status=0009 11:23:34 Check angles 11:23:34 SkyScan query 11:23:35 SkyScan query done: ret=0 az=171.09<-11406 ze=-101.145<-18743 Statuses=0009 0009 11:23:35 Msec=1500 True Az=171.09 Ze=-101.145 Az status=0009 Ze status=0009 11:23:35 Check angles 11:23:35 SkyScan query 11:23:35 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.205<-17347 Statuses=0008 0009 11:23:35 Msec=2250 True Az=176.025 Ze=-80.205 Az status=0008 Ze status=0009 11:23:36 Check angles 11:23:36 SkyScan query 11:23:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.77<-15918 Statuses=0008 0009 11:23:36 Msec=3000 True Az=176.01 Ze=-58.77 Az status=0008 Ze status=0009 11:23:36 Check angles 11:23:36 SkyScan query 11:23:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 11:23:37 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 11:23:37 Message to Master queued w/err=0: serial=63182 error=0 11:23:42 Received message from Master: op=Filter serial=63183 11:23:42 Color wheel filter change from 0 to 0 11:23:42 FLIGetFilterPos err=0 currentPosition=0 11:23:42 FLIGetStepsRemaining err=0 RemainingSteps=0 11:23:42 Filter is already there-color wheel unchanged 11:23:42 Received message from Master: op=Shutter serial=63184 11:23:42 Shutter LASER close 11:23:42 Received message from Camera: op=State serial=63186 11:23:42 GetSingleValue result=40 Value=cccccccc 11:23:42 SkyScan query 11:23:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:23:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:43 Parameters OK 11:23:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:43 Set A/D data flow result=40 11:23:43 Set A/D channel type result=40 11:23:43 Set A/D encoding result=40 11:23:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:43 Set channel filter=0.000000e+000 result=40 11:23:43 Config A/D Result=40 11:23:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:43 Get A/D filter: -9.255963e+061 result=40 11:23:43 Get A/D value=-858993460 result=40 11:23:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:43 Parameters OK 11:23:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:43 Set A/D data flow result=40 11:23:43 Set A/D channel type result=40 11:23:43 Set A/D encoding result=40 11:23:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:43 Set channel filter=0.000000e+000 result=40 11:23:43 Config A/D Result=40 11:23:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:43 Get A/D filter: -9.255963e+061 result=40 11:23:43 Get A/D value=-858993460 result=40 11:23:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:23:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:23:43 Aux= 11:23:43 Message to Camera, serial 63186 queued 11:24:20 Received message from Master: op=PointingHead serial=63199 11:24:20 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:24:20 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:24:20 Point started: ret=0 11:24:20 point_skyscan result=0 11:24:21 Check angles 11:24:21 SkyScan query 11:24:21 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.975<-13465 Statuses=0009 0009 11:24:21 Msec=0 True Az=153.12 Ze=-21.975 Az status=0009 Ze status=0009 11:24:22 Check angles 11:24:22 SkyScan query 11:24:22 SkyScan query done: ret=0 az=135.735<-9049 ze=-0.96<-12064 Statuses=0009 0009 11:24:22 Msec=750 True Az=135.735 Ze=-0.96 Az status=0009 Ze status=0009 11:24:22 Check angles 11:24:22 SkyScan query 11:24:23 SkyScan query done: ret=0 az=118.095<-7873 ze=19.965<-10669 Statuses=0009 0009 11:24:23 Msec=1500 True Az=118.095 Ze=19.965 Az status=0009 Ze status=0009 11:24:23 Check angles 11:24:23 SkyScan query 11:24:24 SkyScan query done: ret=0 az=100.62<-6708 ze=40.935<-9271 Statuses=0009 0009 11:24:24 Msec=2250 True Az=100.62 Ze=40.935 Az status=0009 Ze status=0009 11:24:24 Check angles 11:24:24 SkyScan query 11:24:24 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 11:24:24 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 11:24:25 Check angles 11:24:25 SkyScan query 11:24:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:24:25 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:24:25 Message to Master queued w/err=0: serial=63199 error=0 11:24:30 Received message from Master: op=Filter serial=63200 11:24:30 Color wheel filter change from 0 to 0 11:24:30 FLIGetFilterPos err=0 currentPosition=0 11:24:30 FLIGetStepsRemaining err=0 RemainingSteps=0 11:24:30 Filter is already there-color wheel unchanged 11:24:30 Received message from Master: op=Shutter serial=63201 11:24:30 Shutter LASER close 11:24:30 Received message from Camera: op=State serial=63203 11:24:30 GetSingleValue result=40 Value=cccccccc 11:24:30 SkyScan query 11:24:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:24:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:31 Parameters OK 11:24:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:31 Set A/D data flow result=40 11:24:31 Set A/D channel type result=40 11:24:31 Set A/D encoding result=40 11:24:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:31 Set channel filter=0.000000e+000 result=40 11:24:31 Config A/D Result=40 11:24:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:31 Get A/D filter: -9.255963e+061 result=40 11:24:31 Get A/D value=-858993460 result=40 11:24:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:31 Parameters OK 11:24:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:31 Set A/D data flow result=40 11:24:31 Set A/D channel type result=40 11:24:31 Set A/D encoding result=40 11:24:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:31 Set channel filter=0.000000e+000 result=40 11:24:31 Config A/D Result=40 11:24:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:31 Get A/D filter: -9.255963e+061 result=40 11:24:31 Get A/D value=-858993460 result=40 11:24:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:24:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:24:31 Aux= 11:24:31 Message to Camera, serial 63203 queued 11:25:07 Received message from Master: op=PointingHead serial=63215 11:25:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:25:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:25:07 Point started: ret=0 11:25:07 point_skyscan result=0 11:25:08 Check angles 11:25:08 SkyScan query 11:25:09 SkyScan query done: ret=0 az=109.005<-7267 ze=38.49<-9434 Statuses=0009 0008 11:25:09 Msec=0 True Az=109.005 Ze=38.49 Az status=0009 Ze status=0008 11:25:09 Check angles 11:25:09 SkyScan query 11:25:09 SkyScan query done: ret=0 az=126.81<-8454 ze=38.505<-9433 Statuses=0009 0008 11:25:09 Msec=750 True Az=126.81 Ze=38.505 Az status=0009 Ze status=0008 11:25:09 Check angles 11:25:09 SkyScan query 11:25:10 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 11:25:10 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 11:25:10 Check angles 11:25:10 SkyScan query 11:25:11 SkyScan query done: ret=0 az=162.12<-10808 ze=38.505<-9433 Statuses=0009 0008 11:25:11 Msec=2250 True Az=162.12 Ze=38.505 Az status=0009 Ze status=0008 11:25:11 Check angles 11:25:11 SkyScan query 11:25:12 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:25:12 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:25:12 Check angles 11:25:12 SkyScan query 11:25:12 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:25:12 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:25:12 Message to Master queued w/err=0: serial=63215 error=0 11:25:17 Received message from Master: op=Filter serial=63216 11:25:17 Color wheel filter change from 0 to 0 11:25:17 FLIGetFilterPos err=0 currentPosition=0 11:25:17 FLIGetStepsRemaining err=0 RemainingSteps=0 11:25:17 Filter is already there-color wheel unchanged 11:25:18 Received message from Master: op=Shutter serial=63217 11:25:18 Shutter LASER close 11:25:18 Received message from Camera: op=State serial=63219 11:25:18 GetSingleValue result=40 Value=cccccccc 11:25:18 SkyScan query 11:25:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:25:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:18 Parameters OK 11:25:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:18 Set A/D data flow result=40 11:25:18 Set A/D channel type result=40 11:25:18 Set A/D encoding result=40 11:25:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:18 Set channel filter=0.000000e+000 result=40 11:25:18 Config A/D Result=40 11:25:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:18 Get A/D filter: -9.255963e+061 result=40 11:25:18 Get A/D value=-858993460 result=40 11:25:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:18 Parameters OK 11:25:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:18 Set A/D data flow result=40 11:25:18 Set A/D channel type result=40 11:25:18 Set A/D encoding result=40 11:25:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:18 Set channel filter=0.000000e+000 result=40 11:25:18 Config A/D Result=40 11:25:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:18 Get A/D filter: -9.255963e+061 result=40 11:25:18 Get A/D value=-858993460 result=40 11:25:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:25:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:25:18 Aux= 11:25:18 Message to Camera, serial 63219 queued 11:25:55 Received message from Master: op=PointingHead serial=63232 11:25:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:25:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:25:55 Point started: ret=0 11:25:55 point_skyscan result=0 11:25:56 Check angles 11:25:56 SkyScan query 11:25:57 SkyScan query done: ret=0 az=152.91<-10194 ze=8.715<-11419 Statuses=0009 0009 11:25:57 Msec=0 True Az=152.91 Ze=8.715 Az status=0009 Ze status=0009 11:25:57 Check angles 11:25:57 SkyScan query 11:25:57 SkyScan query done: ret=0 az=135.105<-9007 ze=-12.63<-12842 Statuses=0009 0009 11:25:57 Msec=750 True Az=135.105 Ze=-12.63 Az status=0009 Ze status=0009 11:25:58 Check angles 11:25:58 SkyScan query 11:25:58 SkyScan query done: ret=0 az=117.48<-7832 ze=-33.645<-14243 Statuses=0009 0009 11:25:58 Msec=1500 True Az=117.48 Ze=-33.645 Az status=0009 Ze status=0009 11:25:58 Check angles 11:25:58 SkyScan query [UTC 2018-12-11 11:25:59] 11:25:59 SkyScan query done: ret=0 az=99.78<-6652 ze=-51.57<-15438 Statuses=0009 0009 11:25:59 Msec=2250 True Az=99.78 Ze=-51.57 Az status=0009 Ze status=0009 11:25:59 Check angles 11:25:59 SkyScan query 11:26:00 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.525<-15435 Statuses=0009 0008 11:26:00 Msec=3000 True Az=86.055 Ze=-51.525 Az status=0009 Ze status=0008 11:26:00 Check angles 11:26:00 SkyScan query 11:26:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:26:00 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:26:00 Message to Master queued w/err=0: serial=63232 error=0 11:26:05 Received message from Master: op=Filter serial=63233 11:26:05 Color wheel filter change from 0 to 0 11:26:05 FLIGetFilterPos err=0 currentPosition=0 11:26:05 FLIGetStepsRemaining err=0 RemainingSteps=0 11:26:05 Filter is already there-color wheel unchanged 11:26:06 Received message from Master: op=Shutter serial=63234 11:26:06 Shutter LASER close 11:26:06 Received message from Camera: op=State serial=63236 11:26:06 GetSingleValue result=40 Value=cccccccc 11:26:06 SkyScan query 11:26:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:26:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:06 Parameters OK 11:26:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:06 Set A/D data flow result=40 11:26:06 Set A/D channel type result=40 11:26:06 Set A/D encoding result=40 11:26:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:06 Set channel filter=0.000000e+000 result=40 11:26:06 Config A/D Result=40 11:26:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:06 Get A/D filter: -9.255963e+061 result=40 11:26:06 Get A/D value=-858993460 result=40 11:26:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:06 Parameters OK 11:26:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:06 Set A/D data flow result=40 11:26:06 Set A/D channel type result=40 11:26:06 Set A/D encoding result=40 11:26:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:06 Set channel filter=0.000000e+000 result=40 11:26:06 Config A/D Result=40 11:26:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:06 Get A/D filter: -9.255963e+061 result=40 11:26:06 Get A/D value=-858993460 result=40 11:26:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:26:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:26:06 Aux= 11:26:06 Message to Camera, serial 63236 queued 11:26:43 Received message from Master: op=PointingHead serial=63249 11:26:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:26:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:26:43 Point started: ret=0 11:26:43 point_skyscan result=0 11:26:44 Check angles 11:26:44 SkyScan query 11:26:45 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.09<-17406 Statuses=0009 0009 11:26:45 Msec=0 True Az=108.795 Ze=-81.09 Az status=0009 Ze status=0009 11:26:45 Check angles 11:26:45 SkyScan query 11:26:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.465<-18831 Statuses=0008 0009 11:26:46 Msec=750 True Az=112.995 Ze=-102.465 Az status=0008 Ze status=0009 11:26:46 Check angles 11:26:46 SkyScan query 11:26:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.405<-20227 Statuses=0008 0009 11:26:46 Msec=1500 True Az=112.995 Ze=-123.405 Az status=0008 Ze status=0009 11:26:46 Check angles 11:26:46 SkyScan query 11:26:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.405<-21627 Statuses=0008 0009 11:26:47 Msec=2250 True Az=112.995 Ze=-144.405 Az status=0008 Ze status=0009 11:26:47 Check angles 11:26:47 SkyScan query 11:26:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.78<-23052 Statuses=0008 0009 11:26:48 Msec=3000 True Az=112.995 Ze=-165.78 Az status=0008 Ze status=0009 11:26:48 Check angles 11:26:48 SkyScan query 11:26:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:26:49 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:26:49 Message to Master queued w/err=0: serial=63249 error=0 11:26:54 Received message from Master: op=Filter serial=63250 11:26:54 Color wheel filter change from 0 to 0 11:26:54 FLIGetFilterPos err=0 currentPosition=0 11:26:54 FLIGetStepsRemaining err=0 RemainingSteps=0 11:26:54 Filter is already there-color wheel unchanged 11:26:54 Received message from Master: op=Shutter serial=63251 11:26:54 Shutter LASER open 11:26:54 Received message from Camera: op=State serial=63253 11:26:54 GetSingleValue result=40 Value=cccccccc 11:26:54 SkyScan query 11:26:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:26:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:54 Parameters OK 11:26:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:54 Set A/D data flow result=40 11:26:54 Set A/D channel type result=40 11:26:54 Set A/D encoding result=40 11:26:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:54 Set channel filter=0.000000e+000 result=40 11:26:54 Config A/D Result=40 11:26:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:54 Get A/D filter: -9.255963e+061 result=40 11:26:54 Get A/D value=-858993460 result=40 11:26:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:54 Parameters OK 11:26:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:54 Set A/D data flow result=40 11:26:54 Set A/D channel type result=40 11:26:54 Set A/D encoding result=40 11:26:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:54 Set channel filter=0.000000e+000 result=40 11:26:54 Config A/D Result=40 11:26:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:54 Get A/D filter: -9.255963e+061 result=40 11:26:54 Get A/D value=-858993460 result=40 11:26:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:26:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:26:54 Aux= 11:26:54 Message to Camera, serial 63253 queued 11:27:03 Received message from Master: op=Shutter serial=63263 11:27:03 Shutter LASER close 11:27:03 Received message from Master: op=PointingHead serial=63267 11:27:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:27:03 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:27:04 Point started: ret=0 11:27:04 point_skyscan result=0 11:27:04 Check angles 11:27:04 SkyScan query 11:27:05 SkyScan query done: ret=0 az=89.85<-5990 ze=157.17<-1522 Statuses=0009 0009 11:27:05 Msec=0 True Az=89.85 Ze=157.17 Az status=0009 Ze status=0009 11:27:05 Check angles 11:27:05 SkyScan query 11:27:06 SkyScan query done: ret=0 az=72.33<-4822 ze=136.185<-2921 Statuses=0009 0009 11:27:06 Msec=750 True Az=72.33 Ze=136.185 Az status=0009 Ze status=0009 11:27:06 Check angles 11:27:06 SkyScan query 11:27:07 SkyScan query done: ret=0 az=55.035<-3669 ze=115.275<-4315 Statuses=0009 0009 11:27:07 Msec=1500 True Az=55.035 Ze=115.275 Az status=0009 Ze status=0009 11:27:07 Check angles 11:27:07 SkyScan query 11:27:07 SkyScan query done: ret=0 az=40.86<-2724 ze=94.305<-5713 Statuses=0009 0009 11:27:07 Msec=2250 True Az=40.86 Ze=94.305 Az status=0009 Ze status=0009 11:27:07 Check angles 11:27:07 SkyScan query 11:27:08 SkyScan query done: ret=0 az=40.995<-2733 ze=73.365<-7109 Statuses=0008 0009 11:27:08 Msec=3000 True Az=40.995 Ze=73.365 Az status=0008 Ze status=0009 11:27:08 Check angles 11:27:08 SkyScan query 11:27:09 SkyScan query done: ret=0 az=40.995<-2733 ze=52.8<-8480 Statuses=0008 0009 11:27:09 Msec=3750 True Az=40.995 Ze=52.8 Az status=0008 Ze status=0009 11:27:09 Check angles 11:27:09 SkyScan query 11:27:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:27:10 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:27:10 Message to Master queued w/err=0: serial=63267 error=0 11:27:15 Received message from Master: op=Filter serial=63268 11:27:15 Color wheel filter change from 0 to 0 11:27:15 FLIGetFilterPos err=0 currentPosition=0 11:27:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:27:15 Filter is already there-color wheel unchanged 11:27:15 Received message from Master: op=Shutter serial=63269 11:27:15 Shutter LASER close 11:27:15 Received message from Camera: op=State serial=63271 11:27:15 GetSingleValue result=40 Value=cccccccc 11:27:15 SkyScan query 11:27:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:27:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:15 Parameters OK 11:27:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:15 Set A/D data flow result=40 11:27:15 Set A/D channel type result=40 11:27:15 Set A/D encoding result=40 11:27:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:15 Set channel filter=0.000000e+000 result=40 11:27:15 Config A/D Result=40 11:27:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:15 Get A/D filter: -9.255963e+061 result=40 11:27:15 Get A/D value=-858993460 result=40 11:27:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:15 Parameters OK 11:27:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:15 Set A/D data flow result=40 11:27:15 Set A/D channel type result=40 11:27:15 Set A/D encoding result=40 11:27:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:15 Set channel filter=0.000000e+000 result=40 11:27:15 Config A/D Result=40 11:27:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:15 Get A/D filter: -9.255963e+061 result=40 11:27:15 Get A/D value=-858993460 result=40 11:27:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:27:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:27:15 Aux= 11:27:15 Message to Camera, serial 63271 queued 11:27:52 Received message from Master: op=PointingHead serial=63284 11:27:52 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:27:52 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:27:53 Point started: ret=0 11:27:53 point_skyscan result=0 11:27:53 Check angles 11:27:53 SkyScan query 11:27:54 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 11:27:54 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 11:27:54 Check angles 11:27:54 SkyScan query 11:27:55 SkyScan query done: ret=0 az=81.345<-5423 ze=66.495<-7567 Statuses=0009 0008 11:27:55 Msec=750 True Az=81.345 Ze=66.495 Az status=0009 Ze status=0008 11:27:55 Check angles 11:27:55 SkyScan query 11:27:55 SkyScan query done: ret=0 az=98.955<-6597 ze=66.495<-7567 Statuses=0009 0008 11:27:55 Msec=1500 True Az=98.955 Ze=66.495 Az status=0009 Ze status=0008 11:27:56 Check angles 11:27:56 SkyScan query 11:27:56 SkyScan query done: ret=0 az=116.955<-7797 ze=66.495<-7567 Statuses=0009 0008 11:27:56 Msec=2250 True Az=116.955 Ze=66.495 Az status=0009 Ze status=0008 11:27:56 Check angles 11:27:56 SkyScan query 11:27:57 SkyScan query done: ret=0 az=134.4<-8960 ze=66.495<-7567 Statuses=0009 0008 11:27:57 Msec=3000 True Az=134.4 Ze=66.495 Az status=0009 Ze status=0008 11:27:57 Check angles 11:27:57 SkyScan query 11:27:58 SkyScan query done: ret=0 az=151.83<-10122 ze=66.495<-7567 Statuses=0009 0008 11:27:58 Msec=3750 True Az=151.83 Ze=66.495 Az status=0009 Ze status=0008 11:27:58 Check angles 11:27:58 SkyScan query 11:27:58 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:27:58 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 11:27:58 Message to Master queued w/err=0: serial=63284 error=0 11:28:03 Received message from Master: op=Filter serial=63285 11:28:03 Color wheel filter change from 0 to 0 11:28:03 FLIGetFilterPos err=0 currentPosition=0 11:28:03 FLIGetStepsRemaining err=0 RemainingSteps=0 11:28:03 Filter is already there-color wheel unchanged 11:28:04 Received message from Master: op=Shutter serial=63286 11:28:04 Shutter LASER close 11:28:04 Received message from Camera: op=State serial=63288 11:28:04 GetSingleValue result=40 Value=cccccccc 11:28:04 SkyScan query 11:28:04 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:28:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:04 Parameters OK 11:28:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:04 Set A/D data flow result=40 11:28:04 Set A/D channel type result=40 11:28:04 Set A/D encoding result=40 11:28:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:04 Set channel filter=0.000000e+000 result=40 11:28:04 Config A/D Result=40 11:28:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:04 Get A/D filter: -9.255963e+061 result=40 11:28:04 Get A/D value=-858993460 result=40 11:28:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:04 Parameters OK 11:28:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:04 Set A/D data flow result=40 11:28:04 Set A/D channel type result=40 11:28:04 Set A/D encoding result=40 11:28:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:04 Set channel filter=0.000000e+000 result=40 11:28:04 Config A/D Result=40 11:28:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:04 Get A/D filter: -9.255963e+061 result=40 11:28:04 Get A/D value=-858993460 result=40 11:28:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:04 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:28:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:28:04 Aux= 11:28:04 Message to Camera, serial 63288 queued 11:28:41 Received message from Master: op=PointingHead serial=63301 11:28:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:28:41 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:28:41 Point started: ret=0 11:28:41 point_skyscan result=0 11:28:42 Check angles 11:28:42 SkyScan query 11:28:43 SkyScan query done: ret=0 az=134.835<-8989 ze=36.66<-9556 Statuses=0009 0009 11:28:43 Msec=0 True Az=134.835 Ze=36.66 Az status=0009 Ze status=0009 11:28:43 Check angles 11:28:43 SkyScan query 11:28:44 SkyScan query done: ret=0 az=117.435<-7829 ze=15.75<-10950 Statuses=0009 0009 11:28:44 Msec=750 True Az=117.435 Ze=15.75 Az status=0009 Ze status=0009 11:28:44 Check angles 11:28:44 SkyScan query 11:28:44 SkyScan query done: ret=0 az=100.125<-6675 ze=-5.235<-12349 Statuses=0009 0009 11:28:44 Msec=1500 True Az=100.125 Ze=-5.235 Az status=0009 Ze status=0009 11:28:44 Check angles 11:28:44 SkyScan query 11:28:45 SkyScan query done: ret=0 az=82.62<-5508 ze=-26.175<-13745 Statuses=0009 0009 11:28:45 Msec=2250 True Az=82.62 Ze=-26.175 Az status=0009 Ze status=0009 11:28:45 Check angles 11:28:45 SkyScan query 11:28:46 SkyScan query done: ret=0 az=65.055<-4337 ze=-38.565<-14571 Statuses=0009 0008 11:28:46 Msec=3000 True Az=65.055 Ze=-38.565 Az status=0009 Ze status=0008 11:28:46 Check angles 11:28:46 SkyScan query 11:28:47 SkyScan query done: ret=0 az=47.64<-3176 ze=-38.535<-14569 Statuses=0009 0008 11:28:47 Msec=3750 True Az=47.64 Ze=-38.535 Az status=0009 Ze status=0008 11:28:47 Check angles 11:28:47 SkyScan query 11:28:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:28:47 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:28:47 Message to Master queued w/err=0: serial=63301 error=0 11:28:52 Received message from Master: op=Filter serial=63302 11:28:52 Color wheel filter change from 0 to 0 11:28:52 FLIGetFilterPos err=0 currentPosition=0 11:28:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:28:52 Filter is already there-color wheel unchanged 11:28:52 Received message from Master: op=Shutter serial=63303 11:28:52 Shutter LASER close 11:28:53 Received message from Camera: op=State serial=63305 11:28:53 GetSingleValue result=40 Value=cccccccc 11:28:53 SkyScan query 11:28:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:28:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:53 Parameters OK 11:28:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:53 Set A/D data flow result=40 11:28:53 Set A/D channel type result=40 11:28:53 Set A/D encoding result=40 11:28:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:53 Set channel filter=0.000000e+000 result=40 11:28:53 Config A/D Result=40 11:28:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:53 Get A/D filter: -9.255963e+061 result=40 11:28:53 Get A/D value=-858993460 result=40 11:28:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:53 Parameters OK 11:28:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:53 Set A/D data flow result=40 11:28:53 Set A/D channel type result=40 11:28:53 Set A/D encoding result=40 11:28:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:53 Set channel filter=0.000000e+000 result=40 11:28:53 Config A/D Result=40 11:28:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:53 Get A/D filter: -9.255963e+061 result=40 11:28:53 Get A/D value=-858993460 result=40 11:28:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:28:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:28:53 Aux= 11:28:53 Message to Camera, serial 63305 queued 11:29:30 Received message from Master: op=PointingHead serial=63318 11:29:30 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:29:30 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:29:30 Point started: ret=0 11:29:30 point_skyscan result=0 11:29:31 Check angles 11:29:31 SkyScan query 11:29:32 SkyScan query done: ret=0 az=64.08<-4272 ze=-68.4<-16560 Statuses=0009 0009 11:29:32 Msec=0 True Az=64.08 Ze=-68.4 Az status=0009 Ze status=0009 11:29:32 Check angles 11:29:32 SkyScan query 11:29:32 SkyScan query done: ret=0 az=81.51<-5434 ze=-89.385<-17959 Statuses=0009 0009 11:29:32 Msec=750 True Az=81.51 Ze=-89.385 Az status=0009 Ze status=0009 11:29:33 Check angles 11:29:33 SkyScan query 11:29:33 SkyScan query done: ret=0 az=99.435<-6629 ze=-110.775<-19385 Statuses=0009 0009 11:29:33 Msec=1500 True Az=99.435 Ze=-110.775 Az status=0009 Ze status=0009 11:29:33 Check angles 11:29:33 SkyScan query 11:29:34 SkyScan query done: ret=0 az=116.985<-7799 ze=-131.7<-20780 Statuses=0009 0009 11:29:34 Msec=2250 True Az=116.985 Ze=-131.7 Az status=0009 Ze status=0009 11:29:34 Check angles 11:29:34 SkyScan query 11:29:35 SkyScan query done: ret=0 az=131.16<-8744 ze=-141.555<-21437 Statuses=0009 0008 11:29:35 Msec=3000 True Az=131.16 Ze=-141.555 Az status=0009 Ze status=0008 11:29:35 Check angles 11:29:35 SkyScan query 11:29:35 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 11:29:35 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 11:29:35 Message to Master queued w/err=0: serial=63318 error=0 11:29:40 Received message from Master: op=Filter serial=63319 11:29:40 Color wheel filter change from 0 to 0 11:29:40 FLIGetFilterPos err=0 currentPosition=0 11:29:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:29:40 Filter is already there-color wheel unchanged 11:29:41 Received message from Master: op=Shutter serial=63320 11:29:41 Shutter LASER close 11:29:41 Received message from Camera: op=State serial=63322 11:29:41 GetSingleValue result=40 Value=cccccccc 11:29:41 SkyScan query 11:29:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:29:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:41 Parameters OK 11:29:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:41 Set A/D data flow result=40 11:29:41 Set A/D channel type result=40 11:29:41 Set A/D encoding result=40 11:29:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:41 Set channel filter=0.000000e+000 result=40 11:29:41 Config A/D Result=40 11:29:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:41 Get A/D filter: -9.255963e+061 result=40 11:29:41 Get A/D value=-858993460 result=40 11:29:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:41 Parameters OK 11:29:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:41 Set A/D data flow result=40 11:29:41 Set A/D channel type result=40 11:29:41 Set A/D encoding result=40 11:29:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:41 Set channel filter=0.000000e+000 result=40 11:29:41 Config A/D Result=40 11:29:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:41 Get A/D filter: -9.255963e+061 result=40 11:29:41 Get A/D value=-858993460 result=40 11:29:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:41 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:29:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:29:41 Aux= 11:29:41 Message to Camera, serial 63322 queued 11:30:17 Received message from Master: op=PointingHead serial=63334 11:30:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:30:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:30:17 Point started: ret=0 11:30:17 point_skyscan result=0 11:30:18 Check angles 11:30:18 SkyScan query 11:30:19 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.42<-23428 Statuses=0009 0009 11:30:19 Msec=0 True Az=113.01 Ze=-171.42 Az status=0009 Ze status=0009 11:30:19 Check angles 11:30:19 SkyScan query 11:30:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:30:20 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:30:20 Message to Master queued w/err=0: serial=63334 error=0 11:30:25 Received message from Master: op=Filter serial=63335 11:30:25 Color wheel filter change from 0 to 0 11:30:25 FLIGetFilterPos err=0 currentPosition=0 11:30:25 FLIGetStepsRemaining err=0 RemainingSteps=0 11:30:25 Filter is already there-color wheel unchanged 11:30:25 Received message from Master: op=Shutter serial=63336 11:30:25 Shutter LASER open 11:30:25 Received message from Camera: op=State serial=63338 11:30:25 GetSingleValue result=40 Value=cccccccc 11:30:25 SkyScan query 11:30:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:30:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:25 Parameters OK 11:30:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:25 Set A/D data flow result=40 11:30:25 Set A/D channel type result=40 11:30:25 Set A/D encoding result=40 11:30:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:25 Set channel filter=0.000000e+000 result=40 11:30:25 Config A/D Result=40 11:30:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:25 Get A/D filter: -9.255963e+061 result=40 11:30:25 Get A/D value=-858993460 result=40 11:30:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:25 Parameters OK 11:30:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:25 Set A/D data flow result=40 11:30:25 Set A/D channel type result=40 11:30:25 Set A/D encoding result=40 11:30:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:25 Set channel filter=0.000000e+000 result=40 11:30:25 Config A/D Result=40 11:30:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:25 Get A/D filter: -9.255963e+061 result=40 11:30:25 Get A/D value=-858993460 result=40 11:30:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:30:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:30:25 Aux= 11:30:25 Message to Camera, serial 63338 queued 11:30:34 Received message from Master: op=Shutter serial=63348 11:30:34 Shutter LASER close 11:30:34 Received message from Master: op=PointingHead serial=63352 11:30:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:30:34 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:30:35 Point started: ret=0 11:30:35 point_skyscan result=0 11:30:36 Check angles 11:30:36 SkyScan query 11:30:36 SkyScan query done: ret=0 az=136.395<-9093 ze=-142.755<-21517 Statuses=0009 0009 11:30:36 Msec=0 True Az=136.395 Ze=-142.755 Az status=0009 Ze status=0009 11:30:36 Check angles 11:30:36 SkyScan query 11:30:37 SkyScan query done: ret=0 az=153.855<-10257 ze=-121.815<-20121 Statuses=0009 0009 11:30:37 Msec=750 True Az=153.855 Ze=-121.815 Az status=0009 Ze status=0009 11:30:37 Check angles 11:30:37 SkyScan query 11:30:38 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.815<-18721 Statuses=0009 0009 11:30:38 Msec=1500 True Az=171.45 Ze=-100.815 Az status=0009 Ze status=0009 11:30:38 Check angles 11:30:38 SkyScan query 11:30:38 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.92<-17328 Statuses=0008 0009 11:30:38 Msec=2250 True Az=176.025 Ze=-79.92 Az status=0008 Ze status=0009 11:30:39 Check angles 11:30:39 SkyScan query 11:30:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.935<-15929 Statuses=0008 0009 11:30:39 Msec=3000 True Az=175.995 Ze=-58.935 Az status=0008 Ze status=0009 11:30:39 Check angles 11:30:39 SkyScan query 11:30:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:30:40 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:30:40 Message to Master queued w/err=0: serial=63352 error=0 11:30:45 Received message from Master: op=Filter serial=63353 11:30:45 Color wheel filter change from 0 to 0 11:30:45 FLIGetFilterPos err=0 currentPosition=0 11:30:45 FLIGetStepsRemaining err=0 RemainingSteps=0 11:30:45 Filter is already there-color wheel unchanged 11:30:45 Received message from Master: op=Shutter serial=63354 11:30:45 Shutter LASER close 11:30:45 Received message from Camera: op=State serial=63356 11:30:45 GetSingleValue result=40 Value=cccccccc 11:30:45 SkyScan query 11:30:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:30:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:46 Parameters OK 11:30:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:46 Set A/D data flow result=40 11:30:46 Set A/D channel type result=40 11:30:46 Set A/D encoding result=40 11:30:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:46 Set channel filter=0.000000e+000 result=40 11:30:46 Config A/D Result=40 11:30:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:46 Get A/D filter: -9.255963e+061 result=40 11:30:46 Get A/D value=-858993460 result=40 11:30:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:46 Parameters OK 11:30:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:46 Set A/D data flow result=40 11:30:46 Set A/D channel type result=40 11:30:46 Set A/D encoding result=40 11:30:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:46 Set channel filter=0.000000e+000 result=40 11:30:46 Config A/D Result=40 11:30:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:46 Get A/D filter: -9.255963e+061 result=40 11:30:46 Get A/D value=-858993460 result=40 11:30:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:30:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:30:46 Aux= 11:30:46 Message to Camera, serial 63356 queued 11:31:23 Received message from Master: op=PointingHead serial=63369 11:31:23 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:31:23 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:31:23 Point started: ret=0 11:31:23 point_skyscan result=0 11:31:24 Check angles 11:31:24 SkyScan query 11:31:24 SkyScan query done: ret=0 az=152.625<-10175 ze=-21.135<-13409 Statuses=0009 0009 11:31:24 Msec=0 True Az=152.625 Ze=-21.135 Az status=0009 Ze status=0009 11:31:25 Check angles 11:31:25 SkyScan query 11:31:25 SkyScan query done: ret=0 az=135.165<-9011 ze=-0.285<-12019 Statuses=0009 0009 11:31:25 Msec=750 True Az=135.165 Ze=-0.285 Az status=0009 Ze status=0009 11:31:25 Check angles 11:31:25 SkyScan query 11:31:26 SkyScan query done: ret=0 az=117.555<-7837 ze=20.655<-10623 Statuses=0009 0009 11:31:26 Msec=1500 True Az=117.555 Ze=20.655 Az status=0009 Ze status=0009 11:31:26 Check angles 11:31:26 SkyScan query 11:31:27 SkyScan query done: ret=0 az=99.795<-6653 ze=42.03<-9198 Statuses=0009 0009 11:31:27 Msec=2250 True Az=99.795 Ze=42.03 Az status=0009 Ze status=0009 11:31:27 Check angles 11:31:27 SkyScan query 11:31:27 SkyScan query done: ret=0 az=86.04<-5736 ze=51.555<-8563 Statuses=0009 0008 11:31:27 Msec=3000 True Az=86.04 Ze=51.555 Az status=0009 Ze status=0008 11:31:28 Check angles 11:31:28 SkyScan query 11:31:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:31:28 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:31:28 Message to Master queued w/err=0: serial=63369 error=0 11:31:33 Received message from Master: op=Filter serial=63370 11:31:33 Color wheel filter change from 0 to 0 11:31:33 FLIGetFilterPos err=0 currentPosition=0 11:31:33 FLIGetStepsRemaining err=0 RemainingSteps=0 11:31:33 Filter is already there-color wheel unchanged 11:31:33 Received message from Master: op=Shutter serial=63371 11:31:33 Shutter LASER close 11:31:33 Received message from Camera: op=State serial=63373 11:31:33 GetSingleValue result=40 Value=cccccccc 11:31:33 SkyScan query 11:31:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:31:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:34 Parameters OK 11:31:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:34 Set A/D data flow result=40 11:31:34 Set A/D channel type result=40 11:31:34 Set A/D encoding result=40 11:31:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:34 Set channel filter=0.000000e+000 result=40 11:31:34 Config A/D Result=40 11:31:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:34 Get A/D filter: -9.255963e+061 result=40 11:31:34 Get A/D value=-858993460 result=40 11:31:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:34 Parameters OK 11:31:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:34 Set A/D data flow result=40 11:31:34 Set A/D channel type result=40 11:31:34 Set A/D encoding result=40 11:31:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:34 Set channel filter=0.000000e+000 result=40 11:31:34 Config A/D Result=40 11:31:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:34 Get A/D filter: -9.255963e+061 result=40 11:31:34 Get A/D value=-858993460 result=40 11:31:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:31:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:31:34 Aux= 11:31:34 Message to Camera, serial 63373 queued 11:32:11 Received message from Master: op=PointingHead serial=63386 11:32:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:32:11 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:32:11 Point started: ret=0 11:32:11 point_skyscan result=0 11:32:12 Check angles 11:32:12 SkyScan query 11:32:12 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 11:32:12 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 11:32:13 Check angles 11:32:13 SkyScan query 11:32:13 SkyScan query done: ret=0 az=126.45<-8430 ze=38.505<-9433 Statuses=0009 0008 11:32:13 Msec=750 True Az=126.45 Ze=38.505 Az status=0009 Ze status=0008 11:32:13 Check angles 11:32:13 SkyScan query 11:32:14 SkyScan query done: ret=0 az=143.895<-9593 ze=38.505<-9433 Statuses=0009 0008 11:32:14 Msec=1500 True Az=143.895 Ze=38.505 Az status=0009 Ze status=0008 11:32:14 Check angles 11:32:14 SkyScan query 11:32:15 SkyScan query done: ret=0 az=161.31<-10754 ze=38.505<-9433 Statuses=0009 0008 11:32:15 Msec=2250 True Az=161.31 Ze=38.505 Az status=0009 Ze status=0008 11:32:15 Check angles 11:32:15 SkyScan query 11:32:15 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 11:32:15 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 11:32:16 Check angles 11:32:16 SkyScan query 11:32:16 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:32:16 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:32:16 Message to Master queued w/err=0: serial=63386 error=0 11:32:21 Received message from Master: op=Filter serial=63387 11:32:21 Color wheel filter change from 0 to 0 11:32:21 FLIGetFilterPos err=0 currentPosition=0 11:32:21 FLIGetStepsRemaining err=0 RemainingSteps=0 11:32:21 Filter is already there-color wheel unchanged 11:32:21 Received message from Master: op=Shutter serial=63388 11:32:21 Shutter LASER close 11:32:21 Received message from Camera: op=State serial=63390 11:32:21 GetSingleValue result=40 Value=cccccccc 11:32:21 SkyScan query 11:32:22 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:32:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:22 Parameters OK 11:32:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:22 Set A/D data flow result=40 11:32:22 Set A/D channel type result=40 11:32:22 Set A/D encoding result=40 11:32:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:22 Set channel filter=0.000000e+000 result=40 11:32:22 Config A/D Result=40 11:32:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:22 Get A/D filter: -9.255963e+061 result=40 11:32:22 Get A/D value=-858993460 result=40 11:32:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:22 Parameters OK 11:32:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:22 Set A/D data flow result=40 11:32:22 Set A/D channel type result=40 11:32:22 Set A/D encoding result=40 11:32:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:22 Set channel filter=0.000000e+000 result=40 11:32:22 Config A/D Result=40 11:32:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:22 Get A/D filter: -9.255963e+061 result=40 11:32:22 Get A/D value=-858993460 result=40 11:32:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:32:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:32:22 Aux= 11:32:22 Message to Camera, serial 63390 queued 11:32:59 Received message from Master: op=PointingHead serial=63403 11:32:59 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:32:59 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:32:59 Point started: ret=0 11:32:59 point_skyscan result=0 11:33:00 Check angles 11:33:00 SkyScan query 11:33:00 SkyScan query done: ret=0 az=152.985<-10199 ze=8.745<-11417 Statuses=0009 0009 11:33:00 Msec=0 True Az=152.985 Ze=8.745 Az status=0009 Ze status=0009 11:33:01 Check angles 11:33:01 SkyScan query 11:33:01 SkyScan query done: ret=0 az=135.24<-9016 ze=-12.615<-12841 Statuses=0009 0009 11:33:01 Msec=750 True Az=135.24 Ze=-12.615 Az status=0009 Ze status=0009 11:33:01 Check angles 11:33:01 SkyScan query 11:33:02 SkyScan query done: ret=0 az=117.705<-7847 ze=-33.585<-14239 Statuses=0009 0009 11:33:02 Msec=1500 True Az=117.705 Ze=-33.585 Az status=0009 Ze status=0009 11:33:02 Check angles 11:33:02 SkyScan query 11:33:03 SkyScan query done: ret=0 az=100.275<-6685 ze=-51.555<-15437 Statuses=0009 0009 11:33:03 Msec=2250 True Az=100.275 Ze=-51.555 Az status=0009 Ze status=0009 11:33:03 Check angles 11:33:03 SkyScan query 11:33:03 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 11:33:03 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 11:33:04 Check angles 11:33:04 SkyScan query 11:33:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:33:04 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:33:04 Message to Master queued w/err=0: serial=63403 error=0 11:33:09 Received message from Master: op=Filter serial=63404 11:33:09 Color wheel filter change from 0 to 0 11:33:09 FLIGetFilterPos err=0 currentPosition=0 11:33:09 FLIGetStepsRemaining err=0 RemainingSteps=0 11:33:09 Filter is already there-color wheel unchanged 11:33:09 Received message from Master: op=Shutter serial=63405 11:33:09 Shutter LASER close 11:33:09 Received message from Camera: op=State serial=63407 11:33:09 GetSingleValue result=40 Value=cccccccc 11:33:09 SkyScan query 11:33:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:33:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:10 Parameters OK 11:33:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:10 Set A/D data flow result=40 11:33:10 Set A/D channel type result=40 11:33:10 Set A/D encoding result=40 11:33:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:10 Set channel filter=0.000000e+000 result=40 11:33:10 Config A/D Result=40 11:33:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:10 Get A/D filter: -9.255963e+061 result=40 11:33:10 Get A/D value=-858993460 result=40 11:33:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:10 Parameters OK 11:33:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:10 Set A/D data flow result=40 11:33:10 Set A/D channel type result=40 11:33:10 Set A/D encoding result=40 11:33:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:10 Set channel filter=0.000000e+000 result=40 11:33:10 Config A/D Result=40 11:33:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:10 Get A/D filter: -9.255963e+061 result=40 11:33:10 Get A/D value=-858993460 result=40 11:33:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:33:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:33:10 Aux= 11:33:10 Message to Camera, serial 63407 queued 11:33:47 Received message from Master: op=PointingHead serial=63420 11:33:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:33:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:33:47 Point started: ret=0 11:33:47 point_skyscan result=0 11:33:48 Check angles 11:33:48 SkyScan query 11:33:49 SkyScan query done: ret=0 az=109.05<-7270 ze=-81.15<-17410 Statuses=0009 0009 11:33:49 Msec=0 True Az=109.05 Ze=-81.15 Az status=0009 Ze status=0009 11:33:49 Check angles 11:33:49 SkyScan query 11:33:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.525<-18835 Statuses=0008 0009 11:33:49 Msec=750 True Az=112.995 Ze=-102.525 Az status=0008 Ze status=0009 11:33:49 Check angles 11:33:49 SkyScan query 11:33:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.495<-20233 Statuses=0008 0009 11:33:50 Msec=1500 True Az=112.995 Ze=-123.495 Az status=0008 Ze status=0009 11:33:50 Check angles 11:33:50 SkyScan query 11:33:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.45<-21630 Statuses=0008 0009 11:33:51 Msec=2250 True Az=112.995 Ze=-144.45 Az status=0008 Ze status=0009 11:33:51 Check angles 11:33:51 SkyScan query 11:33:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.825<-23055 Statuses=0008 0009 11:33:52 Msec=3000 True Az=112.995 Ze=-165.825 Az status=0008 Ze status=0009 11:33:52 Check angles 11:33:52 SkyScan query 11:33:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:33:52 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:33:52 Message to Master queued w/err=0: serial=63420 error=0 11:33:57 Received message from Master: op=Filter serial=63421 11:33:57 Color wheel filter change from 0 to 0 11:33:57 FLIGetFilterPos err=0 currentPosition=0 11:33:57 FLIGetStepsRemaining err=0 RemainingSteps=0 11:33:57 Filter is already there-color wheel unchanged 11:33:58 Received message from Master: op=Shutter serial=63422 11:33:58 Shutter LASER open 11:33:58 Received message from Camera: op=State serial=63424 11:33:58 GetSingleValue result=40 Value=cccccccc 11:33:58 SkyScan query 11:33:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:33:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:58 Parameters OK 11:33:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:58 Set A/D data flow result=40 11:33:58 Set A/D channel type result=40 11:33:58 Set A/D encoding result=40 11:33:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:58 Set channel filter=0.000000e+000 result=40 11:33:58 Config A/D Result=40 11:33:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:58 Get A/D filter: -9.255963e+061 result=40 11:33:58 Get A/D value=-858993460 result=40 11:33:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:58 Parameters OK 11:33:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:58 Set A/D data flow result=40 11:33:58 Set A/D channel type result=40 11:33:58 Set A/D encoding result=40 11:33:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:58 Set channel filter=0.000000e+000 result=40 11:33:58 Config A/D Result=40 11:33:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:58 Get A/D filter: -9.255963e+061 result=40 11:33:58 Get A/D value=-858993460 result=40 11:33:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:33:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:33:58 Aux= 11:33:58 Message to Camera, serial 63424 queued 11:34:07 Received message from Master: op=Shutter serial=63434 11:34:07 Shutter LASER close 11:34:07 Received message from Master: op=PointingHead serial=63438 11:34:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:34:07 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:34:08 Point started: ret=0 11:34:08 point_skyscan result=0 11:34:08 Check angles 11:34:08 SkyScan query 11:34:09 SkyScan query done: ret=0 az=90.06<-6004 ze=157.425<-1505 Statuses=0009 0009 11:34:09 Msec=0 True Az=90.06 Ze=157.425 Az status=0009 Ze status=0009 11:34:09 Check angles 11:34:09 SkyScan query 11:34:10 SkyScan query done: ret=0 az=71.955<-4797 ze=135.615<-2959 Statuses=0009 0009 11:34:10 Msec=750 True Az=71.955 Ze=135.615 Az status=0009 Ze status=0009 11:34:10 Check angles 11:34:10 SkyScan query 11:34:10 SkyScan query done: ret=0 az=54.81<-3654 ze=115.05<-4330 Statuses=0009 0009 11:34:10 Msec=1500 True Az=54.81 Ze=115.05 Az status=0009 Ze status=0009 11:34:11 Check angles 11:34:11 SkyScan query 11:34:11 SkyScan query done: ret=0 az=40.92<-2728 ze=93.72<-5752 Statuses=0009 0009 11:34:11 Msec=2250 True Az=40.92 Ze=93.72 Az status=0009 Ze status=0009 11:34:11 Check angles 11:34:11 SkyScan query 11:34:12 SkyScan query done: ret=0 az=40.995<-2733 ze=72.72<-7152 Statuses=0008 0009 11:34:12 Msec=3000 True Az=40.995 Ze=72.72 Az status=0008 Ze status=0009 11:34:12 Check angles 11:34:12 SkyScan query 11:34:13 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 11:34:13 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 11:34:13 Check angles 11:34:13 SkyScan query 11:34:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:34:13 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:34:13 Message to Master queued w/err=0: serial=63438 error=0 11:34:18 Received message from Master: op=Filter serial=63439 11:34:18 Color wheel filter change from 0 to 0 11:34:18 FLIGetFilterPos err=0 currentPosition=0 11:34:18 FLIGetStepsRemaining err=0 RemainingSteps=0 11:34:18 Filter is already there-color wheel unchanged 11:34:19 Received message from Master: op=Shutter serial=63440 11:34:19 Shutter LASER close 11:34:19 Received message from Camera: op=State serial=63442 11:34:19 GetSingleValue result=40 Value=cccccccc 11:34:19 SkyScan query 11:34:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:34:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:19 Parameters OK 11:34:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:19 Set A/D data flow result=40 11:34:19 Set A/D channel type result=40 11:34:19 Set A/D encoding result=40 11:34:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:19 Set channel filter=0.000000e+000 result=40 11:34:19 Config A/D Result=40 11:34:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:19 Get A/D filter: -9.255963e+061 result=40 11:34:19 Get A/D value=-858993460 result=40 11:34:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:19 Parameters OK 11:34:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:19 Set A/D data flow result=40 11:34:19 Set A/D channel type result=40 11:34:19 Set A/D encoding result=40 11:34:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:19 Set channel filter=0.000000e+000 result=40 11:34:19 Config A/D Result=40 11:34:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:19 Get A/D filter: -9.255963e+061 result=40 11:34:19 Get A/D value=-858993460 result=40 11:34:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:34:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:34:19 Aux= 11:34:19 Message to Camera, serial 63442 queued 11:34:56 Received message from Master: op=PointingHead serial=63455 11:34:56 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:34:56 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:34:56 Point started: ret=0 11:34:56 point_skyscan result=0 11:34:57 Check angles 11:34:57 SkyScan query 11:34:58 SkyScan query done: ret=0 az=64.275<-4285 ze=66.54<-7564 Statuses=0009 0008 11:34:58 Msec=0 True Az=64.275 Ze=66.54 Az status=0009 Ze status=0008 11:34:58 Check angles 11:34:58 SkyScan query 11:34:59 SkyScan query done: ret=0 az=81.615<-5441 ze=66.51<-7566 Statuses=0009 0008 11:34:59 Msec=750 True Az=81.615 Ze=66.51 Az status=0009 Ze status=0008 11:34:59 Check angles 11:34:59 SkyScan query 11:34:59 SkyScan query done: ret=0 az=99.69<-6646 ze=66.495<-7567 Statuses=0009 0008 11:34:59 Msec=1500 True Az=99.69 Ze=66.495 Az status=0009 Ze status=0008 11:35:00 Check angles 11:35:00 SkyScan query 11:35:00 SkyScan query done: ret=0 az=117.18<-7812 ze=66.495<-7567 Statuses=0009 0008 11:35:00 Msec=2250 True Az=117.18 Ze=66.495 Az status=0009 Ze status=0008 11:35:00 Check angles 11:35:00 SkyScan query 11:35:01 SkyScan query done: ret=0 az=134.58<-8972 ze=66.495<-7567 Statuses=0009 0008 11:35:01 Msec=3000 True Az=134.58 Ze=66.495 Az status=0009 Ze status=0008 11:35:01 Check angles 11:35:01 SkyScan query 11:35:02 SkyScan query done: ret=0 az=152.49<-10166 ze=66.495<-7567 Statuses=0009 0008 11:35:02 Msec=3750 True Az=152.49 Ze=66.495 Az status=0009 Ze status=0008 11:35:02 Check angles 11:35:02 SkyScan query 11:35:02 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:35:02 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 11:35:02 Message to Master queued w/err=0: serial=63455 error=0 11:35:07 Received message from Master: op=Filter serial=63456 11:35:07 Color wheel filter change from 0 to 0 11:35:07 FLIGetFilterPos err=0 currentPosition=0 11:35:07 FLIGetStepsRemaining err=0 RemainingSteps=0 11:35:07 Filter is already there-color wheel unchanged 11:35:08 Received message from Master: op=Shutter serial=63457 11:35:08 Shutter LASER close 11:35:08 Received message from Camera: op=State serial=63459 11:35:08 GetSingleValue result=40 Value=cccccccc 11:35:08 SkyScan query 11:35:08 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:35:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:08 Parameters OK 11:35:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:08 Set A/D data flow result=40 11:35:08 Set A/D channel type result=40 11:35:08 Set A/D encoding result=40 11:35:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:08 Set channel filter=0.000000e+000 result=40 11:35:08 Config A/D Result=40 11:35:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:08 Get A/D filter: -9.255963e+061 result=40 11:35:08 Get A/D value=-858993460 result=40 11:35:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:08 Parameters OK 11:35:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:08 Set A/D data flow result=40 11:35:08 Set A/D channel type result=40 11:35:08 Set A/D encoding result=40 11:35:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:08 Set channel filter=0.000000e+000 result=40 11:35:08 Config A/D Result=40 11:35:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:08 Get A/D filter: -9.255963e+061 result=40 11:35:08 Get A/D value=-858993460 result=40 11:35:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:08 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:35:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:35:08 Aux= 11:35:08 Message to Camera, serial 63459 queued 11:35:45 Received message from Master: op=PointingHead serial=63472 11:35:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:35:45 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:35:45 Point started: ret=0 11:35:45 point_skyscan result=0 11:35:46 Check angles 11:35:46 SkyScan query 11:35:47 SkyScan query done: ret=0 az=134.385<-8959 ze=36.225<-9585 Statuses=0009 0009 11:35:47 Msec=0 True Az=134.385 Ze=36.225 Az status=0009 Ze status=0009 11:35:47 Check angles 11:35:47 SkyScan query 11:35:47 SkyScan query done: ret=0 az=116.58<-7772 ze=14.805<-11013 Statuses=0009 0009 11:35:47 Msec=750 True Az=116.58 Ze=14.805 Az status=0009 Ze status=0009 11:35:48 Check angles [UTC 2018-12-11 11:35:48] 11:35:48 SkyScan query 11:35:48 SkyScan query done: ret=0 az=97.665<-6511 ze=-7.86<-12524 Statuses=0009 0009 11:35:48 Msec=1500 True Az=97.665 Ze=-7.86 Az status=0009 Ze status=0009 11:35:48 Check angles 11:35:48 SkyScan query 11:35:49 SkyScan query done: ret=0 az=81.705<-5447 ze=-27.09<-13806 Statuses=0009 0009 11:35:49 Msec=2250 True Az=81.705 Ze=-27.09 Az status=0009 Ze status=0009 11:35:49 Check angles 11:35:49 SkyScan query 11:35:50 SkyScan query done: ret=0 az=63.9<-4260 ze=-38.565<-14571 Statuses=0009 0008 11:35:50 Msec=3000 True Az=63.9 Ze=-38.565 Az status=0009 Ze status=0008 11:35:50 Check angles 11:35:50 SkyScan query 11:35:51 SkyScan query done: ret=0 az=46.035<-3069 ze=-38.52<-14568 Statuses=0009 0008 11:35:51 Msec=3750 True Az=46.035 Ze=-38.52 Az status=0009 Ze status=0008 11:35:51 Check angles 11:35:51 SkyScan query 11:35:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:35:51 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:35:51 Message to Master queued w/err=0: serial=63472 error=0 [UTC 2018-12-11 11:35:54] 11:35:56 Received message from Master: op=Filter serial=63473 11:35:56 Color wheel filter change from 0 to 0 11:35:56 FLIGetFilterPos err=0 currentPosition=0 11:35:56 FLIGetStepsRemaining err=0 RemainingSteps=0 11:35:56 Filter is already there-color wheel unchanged 11:35:56 Received message from Master: op=Shutter serial=63474 11:35:56 Shutter LASER close 11:35:56 Received message from Camera: op=State serial=63476 11:35:56 GetSingleValue result=40 Value=cccccccc 11:35:56 SkyScan query 11:35:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:35:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:57 Parameters OK 11:35:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:57 Set A/D data flow result=40 11:35:57 Set A/D channel type result=40 11:35:57 Set A/D encoding result=40 11:35:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:57 Set channel filter=0.000000e+000 result=40 11:35:57 Config A/D Result=40 11:35:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:57 Get A/D filter: -9.255963e+061 result=40 11:35:57 Get A/D value=-858993460 result=40 11:35:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:57 Parameters OK 11:35:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:57 Set A/D data flow result=40 11:35:57 Set A/D channel type result=40 11:35:57 Set A/D encoding result=40 11:35:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:57 Set channel filter=0.000000e+000 result=40 11:35:57 Config A/D Result=40 11:35:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:57 Get A/D filter: -9.255963e+061 result=40 11:35:57 Get A/D value=-858993460 result=40 11:35:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:35:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:35:57 Aux= 11:35:57 Message to Camera, serial 63476 queued 11:36:34 Received message from Master: op=PointingHead serial=63489 11:36:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:36:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:36:34 Point started: ret=0 11:36:34 point_skyscan result=0 11:36:35 Check angles 11:36:35 SkyScan query 11:36:36 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.58<-16572 Statuses=0009 0009 11:36:36 Msec=0 True Az=64.425 Ze=-68.58 Az status=0009 Ze status=0009 11:36:36 Check angles 11:36:36 SkyScan query 11:36:36 SkyScan query done: ret=0 az=81.75<-5450 ze=-89.58<-17972 Statuses=0009 0009 11:36:36 Msec=750 True Az=81.75 Ze=-89.58 Az status=0009 Ze status=0009 11:36:36 Check angles 11:36:36 SkyScan query 11:36:37 SkyScan query done: ret=0 az=99.375<-6625 ze=-110.52<-19368 Statuses=0009 0009 11:36:37 Msec=1500 True Az=99.375 Ze=-110.52 Az status=0009 Ze status=0009 11:36:37 Check angles 11:36:37 SkyScan query 11:36:38 SkyScan query done: ret=0 az=117.36<-7824 ze=-131.88<-20792 Statuses=0009 0009 11:36:38 Msec=2250 True Az=117.36 Ze=-131.88 Az status=0009 Ze status=0009 11:36:38 Check angles 11:36:38 SkyScan query 11:36:39 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.555<-21437 Statuses=0009 0008 11:36:39 Msec=3000 True Az=131.115 Ze=-141.555 Az status=0009 Ze status=0008 11:36:39 Check angles 11:36:39 SkyScan query 11:36:39 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 11:36:39 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 11:36:39 Message to Master queued w/err=0: serial=63489 error=0 11:36:44 Received message from Master: op=Filter serial=63490 11:36:44 Color wheel filter change from 0 to 0 11:36:44 FLIGetFilterPos err=0 currentPosition=0 11:36:44 FLIGetStepsRemaining err=0 RemainingSteps=0 11:36:44 Filter is already there-color wheel unchanged 11:36:45 Received message from Master: op=Shutter serial=63491 11:36:45 Shutter LASER close 11:36:45 Received message from Camera: op=State serial=63493 11:36:45 GetSingleValue result=40 Value=cccccccc 11:36:45 SkyScan query 11:36:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:36:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:45 Parameters OK 11:36:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:45 Set A/D data flow result=40 11:36:45 Set A/D channel type result=40 11:36:45 Set A/D encoding result=40 11:36:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:45 Set channel filter=0.000000e+000 result=40 11:36:45 Config A/D Result=40 11:36:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:45 Get A/D filter: -9.255963e+061 result=40 11:36:45 Get A/D value=-858993460 result=40 11:36:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:45 Parameters OK 11:36:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:45 Set A/D data flow result=40 11:36:45 Set A/D channel type result=40 11:36:45 Set A/D encoding result=40 11:36:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:45 Set channel filter=0.000000e+000 result=40 11:36:45 Config A/D Result=40 11:36:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:45 Get A/D filter: -9.255963e+061 result=40 11:36:45 Get A/D value=-858993460 result=40 11:36:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:45 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:36:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:36:45 Aux= 11:36:45 Message to Camera, serial 63493 queued 11:37:22 Received message from Master: op=PointingHead serial=63506 11:37:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:37:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:37:22 Point started: ret=0 11:37:22 point_skyscan result=0 11:37:23 Check angles 11:37:23 SkyScan query 11:37:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.495<-23433 Statuses=0008 0009 11:37:24 Msec=0 True Az=112.995 Ze=-171.495 Az status=0008 Ze status=0009 11:37:24 Check angles 11:37:24 SkyScan query 11:37:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:37:24 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:37:24 Message to Master queued w/err=0: serial=63506 error=0 11:37:29 Received message from Master: op=Filter serial=63507 11:37:29 Color wheel filter change from 0 to 0 11:37:29 FLIGetFilterPos err=0 currentPosition=0 11:37:29 FLIGetStepsRemaining err=0 RemainingSteps=0 11:37:29 Filter is already there-color wheel unchanged 11:37:30 Received message from Master: op=Shutter serial=63508 11:37:30 Shutter LASER open 11:37:30 Received message from Camera: op=State serial=63510 11:37:30 GetSingleValue result=40 Value=cccccccc 11:37:30 SkyScan query 11:37:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:37:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:30 Parameters OK 11:37:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:30 Set A/D data flow result=40 11:37:30 Set A/D channel type result=40 11:37:30 Set A/D encoding result=40 11:37:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:30 Set channel filter=0.000000e+000 result=40 11:37:30 Config A/D Result=40 11:37:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:30 Get A/D filter: -9.255963e+061 result=40 11:37:30 Get A/D value=-858993460 result=40 11:37:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:30 Parameters OK 11:37:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:30 Set A/D data flow result=40 11:37:30 Set A/D channel type result=40 11:37:30 Set A/D encoding result=40 11:37:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:30 Set channel filter=0.000000e+000 result=40 11:37:30 Config A/D Result=40 11:37:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:30 Get A/D filter: -9.255963e+061 result=40 11:37:30 Get A/D value=-858993460 result=40 11:37:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:37:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:37:30 Aux= 11:37:30 Message to Camera, serial 63510 queued 11:37:39 Received message from Master: op=Shutter serial=63520 11:37:39 Shutter LASER close 11:37:39 Received message from Master: op=PointingHead serial=63524 11:37:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:37:39 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:37:40 Point started: ret=0 11:37:40 point_skyscan result=0 11:37:40 Check angles 11:37:40 SkyScan query 11:37:41 SkyScan query done: ret=0 az=136.395<-9093 ze=-142.725<-21515 Statuses=0009 0009 11:37:41 Msec=0 True Az=136.395 Ze=-142.725 Az status=0009 Ze status=0009 11:37:41 Check angles 11:37:41 SkyScan query 11:37:42 SkyScan query done: ret=0 az=154.005<-10267 ze=-121.755<-20117 Statuses=0009 0009 11:37:42 Msec=750 True Az=154.005 Ze=-121.755 Az status=0009 Ze status=0009 11:37:42 Check angles 11:37:42 SkyScan query 11:37:43 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.785<-18719 Statuses=0009 0009 11:37:43 Msec=1500 True Az=171.405 Ze=-100.785 Az status=0009 Ze status=0009 11:37:43 Check angles 11:37:43 SkyScan query 11:37:43 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.89<-17326 Statuses=0008 0009 11:37:43 Msec=2250 True Az=176.025 Ze=-79.89 Az status=0008 Ze status=0009 11:37:43 Check angles 11:37:43 SkyScan query 11:37:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.905<-15927 Statuses=0008 0009 11:37:44 Msec=3000 True Az=176.01 Ze=-58.905 Az status=0008 Ze status=0009 11:37:44 Check angles 11:37:44 SkyScan query 11:37:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:37:45 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:37:45 Message to Master queued w/err=0: serial=63524 error=0 11:37:50 Received message from Master: op=Filter serial=63525 11:37:50 Color wheel filter change from 0 to 0 11:37:50 FLIGetFilterPos err=0 currentPosition=0 11:37:50 FLIGetStepsRemaining err=0 RemainingSteps=0 11:37:50 Filter is already there-color wheel unchanged 11:37:50 Received message from Master: op=Shutter serial=63526 11:37:50 Shutter LASER close 11:37:50 Received message from Camera: op=State serial=63528 11:37:50 GetSingleValue result=40 Value=cccccccc 11:37:50 SkyScan query 11:37:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:37:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:51 Parameters OK 11:37:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:51 Set A/D data flow result=40 11:37:51 Set A/D channel type result=40 11:37:51 Set A/D encoding result=40 11:37:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:51 Set channel filter=0.000000e+000 result=40 11:37:51 Config A/D Result=40 11:37:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:51 Get A/D filter: -9.255963e+061 result=40 11:37:51 Get A/D value=-858993460 result=40 11:37:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:51 Parameters OK 11:37:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:51 Set A/D data flow result=40 11:37:51 Set A/D channel type result=40 11:37:51 Set A/D encoding result=40 11:37:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:51 Set channel filter=0.000000e+000 result=40 11:37:51 Config A/D Result=40 11:37:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:51 Get A/D filter: -9.255963e+061 result=40 11:37:51 Get A/D value=-858993460 result=40 11:37:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:37:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:37:51 Aux= 11:37:51 Message to Camera, serial 63528 queued 11:38:28 Received message from Master: op=PointingHead serial=63541 11:38:28 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:38:28 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:38:28 Point started: ret=0 11:38:28 point_skyscan result=0 11:38:29 Check angles 11:38:29 SkyScan query 11:38:29 SkyScan query done: ret=0 az=153.165<-10211 ze=-22.005<-13467 Statuses=0009 0009 11:38:29 Msec=0 True Az=153.165 Ze=-22.005 Az status=0009 Ze status=0009 11:38:29 Check angles 11:38:29 SkyScan query 11:38:30 SkyScan query done: ret=0 az=135.78<-9052 ze=-1.035<-12069 Statuses=0009 0009 11:38:30 Msec=750 True Az=135.78 Ze=-1.035 Az status=0009 Ze status=0009 11:38:30 Check angles 11:38:30 SkyScan query 11:38:31 SkyScan query done: ret=0 az=118.23<-7882 ze=19.92<-10672 Statuses=0009 0009 11:38:31 Msec=1500 True Az=118.23 Ze=19.92 Az status=0009 Ze status=0009 11:38:31 Check angles 11:38:31 SkyScan query 11:38:31 SkyScan query done: ret=0 az=100.29<-6686 ze=41.355<-9243 Statuses=0009 0009 11:38:31 Msec=2250 True Az=100.29 Ze=41.355 Az status=0009 Ze status=0009 11:38:32 Check angles 11:38:32 SkyScan query 11:38:32 SkyScan query done: ret=0 az=86.07<-5738 ze=51.57<-8562 Statuses=0009 0008 11:38:32 Msec=3000 True Az=86.07 Ze=51.57 Az status=0009 Ze status=0008 11:38:32 Check angles 11:38:32 SkyScan query 11:38:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:38:33 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 11:38:33 Message to Master queued w/err=0: serial=63541 error=0 11:38:38 Received message from Master: op=Filter serial=63542 11:38:38 Color wheel filter change from 0 to 0 11:38:38 FLIGetFilterPos err=0 currentPosition=0 11:38:38 FLIGetStepsRemaining err=0 RemainingSteps=0 11:38:38 Filter is already there-color wheel unchanged 11:38:38 Received message from Master: op=Shutter serial=63543 11:38:38 Shutter LASER close 11:38:38 Received message from Camera: op=State serial=63545 11:38:38 GetSingleValue result=40 Value=cccccccc 11:38:38 SkyScan query 11:38:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:38:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:39 Parameters OK 11:38:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:39 Set A/D data flow result=40 11:38:39 Set A/D channel type result=40 11:38:39 Set A/D encoding result=40 11:38:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:39 Set channel filter=0.000000e+000 result=40 11:38:39 Config A/D Result=40 11:38:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:39 Get A/D filter: -9.255963e+061 result=40 11:38:39 Get A/D value=-858993460 result=40 11:38:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:39 Parameters OK 11:38:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:39 Set A/D data flow result=40 11:38:39 Set A/D channel type result=40 11:38:39 Set A/D encoding result=40 11:38:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:39 Set channel filter=0.000000e+000 result=40 11:38:39 Config A/D Result=40 11:38:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:39 Get A/D filter: -9.255963e+061 result=40 11:38:39 Get A/D value=-858993460 result=40 11:38:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:38:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:38:39 Aux= 11:38:39 Message to Camera, serial 63545 queued 11:39:15 Received message from Master: op=PointingHead serial=63557 11:39:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:39:15 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:39:15 Point started: ret=0 11:39:15 point_skyscan result=0 11:39:16 Check angles 11:39:16 SkyScan query 11:39:16 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 11:39:16 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 11:39:17 Check angles 11:39:17 SkyScan query 11:39:17 SkyScan query done: ret=0 az=126.525<-8435 ze=38.505<-9433 Statuses=0009 0008 11:39:17 Msec=750 True Az=126.525 Ze=38.505 Az status=0009 Ze status=0008 11:39:17 Check angles 11:39:17 SkyScan query 11:39:18 SkyScan query done: ret=0 az=143.955<-9597 ze=38.505<-9433 Statuses=0009 0008 11:39:18 Msec=1500 True Az=143.955 Ze=38.505 Az status=0009 Ze status=0008 11:39:18 Check angles 11:39:18 SkyScan query 11:39:19 SkyScan query done: ret=0 az=161.355<-10757 ze=38.505<-9433 Statuses=0009 0008 11:39:19 Msec=2250 True Az=161.355 Ze=38.505 Az status=0009 Ze status=0008 11:39:19 Check angles 11:39:19 SkyScan query 11:39:19 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 11:39:19 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 11:39:20 Check angles 11:39:20 SkyScan query 11:39:20 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:39:20 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:39:20 Message to Master queued w/err=0: serial=63557 error=0 11:39:25 Received message from Master: op=Filter serial=63558 11:39:25 Color wheel filter change from 0 to 0 11:39:25 FLIGetFilterPos err=0 currentPosition=0 11:39:25 FLIGetStepsRemaining err=0 RemainingSteps=0 11:39:25 Filter is already there-color wheel unchanged 11:39:25 Received message from Master: op=Shutter serial=63559 11:39:25 Shutter LASER close 11:39:25 Received message from Camera: op=State serial=63561 11:39:25 GetSingleValue result=40 Value=cccccccc 11:39:25 SkyScan query 11:39:26 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:39:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:26 Parameters OK 11:39:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:26 Set A/D data flow result=40 11:39:26 Set A/D channel type result=40 11:39:26 Set A/D encoding result=40 11:39:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:26 Set channel filter=0.000000e+000 result=40 11:39:26 Config A/D Result=40 11:39:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:26 Get A/D filter: -9.255963e+061 result=40 11:39:26 Get A/D value=-858993460 result=40 11:39:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:26 Parameters OK 11:39:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:26 Set A/D data flow result=40 11:39:26 Set A/D channel type result=40 11:39:26 Set A/D encoding result=40 11:39:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:26 Set channel filter=0.000000e+000 result=40 11:39:26 Config A/D Result=40 11:39:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:26 Get A/D filter: -9.255963e+061 result=40 11:39:26 Get A/D value=-858993460 result=40 11:39:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:39:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:39:26 Aux= 11:39:26 Message to Camera, serial 63561 queued 11:40:03 Received message from Master: op=PointingHead serial=63574 11:40:03 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:40:03 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:40:03 Point started: ret=0 11:40:03 point_skyscan result=0 11:40:04 Check angles 11:40:04 SkyScan query 11:40:04 SkyScan query done: ret=0 az=153.105<-10207 ze=8.82<-11412 Statuses=0009 0009 11:40:04 Msec=0 True Az=153.105 Ze=8.82 Az status=0009 Ze status=0009 11:40:05 Check angles 11:40:05 SkyScan query 11:40:05 SkyScan query done: ret=0 az=135.705<-9047 ze=-12.135<-12809 Statuses=0009 0009 11:40:05 Msec=750 True Az=135.705 Ze=-12.135 Az status=0009 Ze status=0009 11:40:05 Check angles 11:40:05 SkyScan query 11:40:06 SkyScan query done: ret=0 az=118.155<-7877 ze=-33.075<-14205 Statuses=0009 0009 11:40:06 Msec=1500 True Az=118.155 Ze=-33.075 Az status=0009 Ze status=0009 11:40:06 Check angles 11:40:06 SkyScan query 11:40:07 SkyScan query done: ret=0 az=100.62<-6708 ze=-51.51<-15434 Statuses=0009 0009 11:40:07 Msec=2250 True Az=100.62 Ze=-51.51 Az status=0009 Ze status=0009 11:40:07 Check angles 11:40:07 SkyScan query 11:40:07 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.525<-15435 Statuses=0009 0008 11:40:07 Msec=3000 True Az=86.055 Ze=-51.525 Az status=0009 Ze status=0008 11:40:08 Check angles 11:40:08 SkyScan query 11:40:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:40:08 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:40:08 Message to Master queued w/err=0: serial=63574 error=0 11:40:13 Received message from Master: op=Filter serial=63575 11:40:13 Color wheel filter change from 0 to 0 11:40:13 FLIGetFilterPos err=0 currentPosition=0 11:40:13 FLIGetStepsRemaining err=0 RemainingSteps=0 11:40:13 Filter is already there-color wheel unchanged 11:40:13 Received message from Master: op=Shutter serial=63576 11:40:13 Shutter LASER close 11:40:13 Received message from Camera: op=State serial=63578 11:40:13 GetSingleValue result=40 Value=cccccccc 11:40:13 SkyScan query 11:40:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:40:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:14 Parameters OK 11:40:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:14 Set A/D data flow result=40 11:40:14 Set A/D channel type result=40 11:40:14 Set A/D encoding result=40 11:40:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:14 Set channel filter=0.000000e+000 result=40 11:40:14 Config A/D Result=40 11:40:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:14 Get A/D filter: -9.255963e+061 result=40 11:40:14 Get A/D value=-858993460 result=40 11:40:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:14 Parameters OK 11:40:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:14 Set A/D data flow result=40 11:40:14 Set A/D channel type result=40 11:40:14 Set A/D encoding result=40 11:40:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:14 Set channel filter=0.000000e+000 result=40 11:40:14 Config A/D Result=40 11:40:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:14 Get A/D filter: -9.255963e+061 result=40 11:40:14 Get A/D value=-858993460 result=40 11:40:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:40:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:40:14 Aux= 11:40:14 Message to Camera, serial 63578 queued 11:40:51 Received message from Master: op=PointingHead serial=63591 11:40:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:40:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:40:51 Point started: ret=0 11:40:51 point_skyscan result=0 11:40:52 Check angles 11:40:52 SkyScan query 11:40:53 SkyScan query done: ret=0 az=108.825<-7255 ze=-81<-17400 Statuses=0009 0009 11:40:53 Msec=0 True Az=108.825 Ze=-81 Az status=0009 Ze status=0009 11:40:53 Check angles 11:40:53 SkyScan query 11:40:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.955<-18797 Statuses=0008 0009 11:40:53 Msec=750 True Az=112.995 Ze=-101.955 Az status=0008 Ze status=0009 11:40:53 Check angles 11:40:53 SkyScan query 11:40:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.91<-20194 Statuses=0008 0009 11:40:54 Msec=1500 True Az=112.995 Ze=-122.91 Az status=0008 Ze status=0009 11:40:54 Check angles 11:40:54 SkyScan query 11:40:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.85<-21590 Statuses=0008 0009 11:40:55 Msec=2250 True Az=112.995 Ze=-143.85 Az status=0008 Ze status=0009 11:40:55 Check angles 11:40:55 SkyScan query 11:40:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.27<-23018 Statuses=0008 0009 11:40:56 Msec=3000 True Az=112.995 Ze=-165.27 Az status=0008 Ze status=0009 11:40:56 Check angles 11:40:56 SkyScan query 11:40:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:40:56 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:40:56 Message to Master queued w/err=0: serial=63591 error=0 11:41:01 Received message from Master: op=Filter serial=63592 11:41:01 Color wheel filter change from 0 to 0 11:41:01 FLIGetFilterPos err=0 currentPosition=0 11:41:01 FLIGetStepsRemaining err=0 RemainingSteps=0 11:41:01 Filter is already there-color wheel unchanged 11:41:01 Received message from Master: op=Shutter serial=63593 11:41:01 Shutter LASER open 11:41:02 Received message from Camera: op=State serial=63595 11:41:02 GetSingleValue result=40 Value=cccccccc 11:41:02 SkyScan query 11:41:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:41:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:02 Parameters OK 11:41:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:02 Set A/D data flow result=40 11:41:02 Set A/D channel type result=40 11:41:02 Set A/D encoding result=40 11:41:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:02 Set channel filter=0.000000e+000 result=40 11:41:02 Config A/D Result=40 11:41:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:02 Get A/D filter: -9.255963e+061 result=40 11:41:02 Get A/D value=-858993460 result=40 11:41:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:02 Parameters OK 11:41:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:02 Set A/D data flow result=40 11:41:02 Set A/D channel type result=40 11:41:02 Set A/D encoding result=40 11:41:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:02 Set channel filter=0.000000e+000 result=40 11:41:02 Config A/D Result=40 11:41:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:02 Get A/D filter: -9.255963e+061 result=40 11:41:02 Get A/D value=-858993460 result=40 11:41:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:41:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:41:02 Aux= 11:41:02 Message to Camera, serial 63595 queued 11:41:11 Received message from Master: op=Shutter serial=63605 11:41:11 Shutter LASER close 11:41:11 Received message from Master: op=PointingHead serial=63609 11:41:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:41:11 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:41:11 Point started: ret=0 11:41:11 point_skyscan result=0 11:41:12 Check angles 11:41:12 SkyScan query 11:41:13 SkyScan query done: ret=0 az=89.835<-5989 ze=157.14<-1524 Statuses=0009 0009 11:41:13 Msec=0 True Az=89.835 Ze=157.14 Az status=0009 Ze status=0009 11:41:13 Check angles 11:41:13 SkyScan query 11:41:14 SkyScan query done: ret=0 az=72.33<-4822 ze=136.185<-2921 Statuses=0009 0009 11:41:14 Msec=750 True Az=72.33 Ze=136.185 Az status=0009 Ze status=0009 11:41:14 Check angles 11:41:14 SkyScan query 11:41:14 SkyScan query done: ret=0 az=54.975<-3665 ze=115.26<-4316 Statuses=0009 0009 11:41:14 Msec=1500 True Az=54.975 Ze=115.26 Az status=0009 Ze status=0009 11:41:14 Check angles 11:41:14 SkyScan query 11:41:15 SkyScan query done: ret=0 az=40.875<-2725 ze=94.275<-5715 Statuses=0009 0009 11:41:15 Msec=2250 True Az=40.875 Ze=94.275 Az status=0009 Ze status=0009 11:41:15 Check angles 11:41:15 SkyScan query 11:41:16 SkyScan query done: ret=0 az=40.995<-2733 ze=73.32<-7112 Statuses=0008 0009 11:41:16 Msec=3000 True Az=40.995 Ze=73.32 Az status=0008 Ze status=0009 11:41:16 Check angles 11:41:16 SkyScan query 11:41:17 SkyScan query done: ret=0 az=40.995<-2733 ze=52.785<-8481 Statuses=0008 0009 11:41:17 Msec=3750 True Az=40.995 Ze=52.785 Az status=0008 Ze status=0009 11:41:17 Check angles 11:41:17 SkyScan query 11:41:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:41:17 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:41:17 Message to Master queued w/err=0: serial=63609 error=0 11:41:22 Received message from Master: op=Filter serial=63610 11:41:22 Color wheel filter change from 0 to 0 11:41:22 FLIGetFilterPos err=0 currentPosition=0 11:41:22 FLIGetStepsRemaining err=0 RemainingSteps=0 11:41:22 Filter is already there-color wheel unchanged 11:41:22 Received message from Master: op=Shutter serial=63611 11:41:22 Shutter LASER close 11:41:23 Received message from Camera: op=State serial=63613 11:41:23 GetSingleValue result=40 Value=cccccccc 11:41:23 SkyScan query 11:41:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:41:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:23 Parameters OK 11:41:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:23 Set A/D data flow result=40 11:41:23 Set A/D channel type result=40 11:41:23 Set A/D encoding result=40 11:41:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:23 Set channel filter=0.000000e+000 result=40 11:41:23 Config A/D Result=40 11:41:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:23 Get A/D filter: -9.255963e+061 result=40 11:41:23 Get A/D value=-858993460 result=40 11:41:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:23 Parameters OK 11:41:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:23 Set A/D data flow result=40 11:41:23 Set A/D channel type result=40 11:41:23 Set A/D encoding result=40 11:41:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:23 Set channel filter=0.000000e+000 result=40 11:41:23 Config A/D Result=40 11:41:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:23 Get A/D filter: -9.255963e+061 result=40 11:41:23 Get A/D value=-858993460 result=40 11:41:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:41:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:41:23 Aux= 11:41:23 Message to Camera, serial 63613 queued 11:42:00 Received message from Master: op=PointingHead serial=63626 11:42:00 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:42:00 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:42:00 Point started: ret=0 11:42:00 point_skyscan result=0 11:42:01 Check angles 11:42:01 SkyScan query 11:42:02 SkyScan query done: ret=0 az=63.84<-4256 ze=66.555<-7563 Statuses=0009 0008 11:42:02 Msec=0 True Az=63.84 Ze=66.555 Az status=0009 Ze status=0008 11:42:02 Check angles 11:42:02 SkyScan query 11:42:02 SkyScan query done: ret=0 az=81.21<-5414 ze=66.51<-7566 Statuses=0009 0008 11:42:02 Msec=750 True Az=81.21 Ze=66.51 Az status=0009 Ze status=0008 11:42:03 Check angles 11:42:03 SkyScan query 11:42:03 SkyScan query done: ret=0 az=98.79<-6586 ze=66.495<-7567 Statuses=0009 0008 11:42:03 Msec=1500 True Az=98.79 Ze=66.495 Az status=0009 Ze status=0008 11:42:03 Check angles 11:42:03 SkyScan query 11:42:04 SkyScan query done: ret=0 az=116.355<-7757 ze=66.495<-7567 Statuses=0009 0008 11:42:04 Msec=2250 True Az=116.355 Ze=66.495 Az status=0009 Ze status=0008 11:42:04 Check angles 11:42:04 SkyScan query 11:42:05 SkyScan query done: ret=0 az=133.89<-8926 ze=66.495<-7567 Statuses=0009 0008 11:42:05 Msec=3000 True Az=133.89 Ze=66.495 Az status=0009 Ze status=0008 11:42:05 Check angles 11:42:05 SkyScan query 11:42:05 SkyScan query done: ret=0 az=151.245<-10083 ze=66.495<-7567 Statuses=0009 0008 11:42:05 Msec=3750 True Az=151.245 Ze=66.495 Az status=0009 Ze status=0008 11:42:06 Check angles 11:42:06 SkyScan query 11:42:06 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:42:06 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 11:42:06 Message to Master queued w/err=0: serial=63626 error=0 11:42:11 Received message from Master: op=Filter serial=63627 11:42:11 Color wheel filter change from 0 to 0 11:42:11 FLIGetFilterPos err=0 currentPosition=0 11:42:11 FLIGetStepsRemaining err=0 RemainingSteps=0 11:42:11 Filter is already there-color wheel unchanged 11:42:11 Received message from Master: op=Shutter serial=63628 11:42:11 Shutter LASER close 11:42:11 Received message from Camera: op=State serial=63630 11:42:11 GetSingleValue result=40 Value=cccccccc 11:42:11 SkyScan query 11:42:12 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:42:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:12 Parameters OK 11:42:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:12 Set A/D data flow result=40 11:42:12 Set A/D channel type result=40 11:42:12 Set A/D encoding result=40 11:42:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:12 Set channel filter=0.000000e+000 result=40 11:42:12 Config A/D Result=40 11:42:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:12 Get A/D filter: -9.255963e+061 result=40 11:42:12 Get A/D value=-858993460 result=40 11:42:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:12 Parameters OK 11:42:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:12 Set A/D data flow result=40 11:42:12 Set A/D channel type result=40 11:42:12 Set A/D encoding result=40 11:42:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:12 Set channel filter=0.000000e+000 result=40 11:42:12 Config A/D Result=40 11:42:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:12 Get A/D filter: -9.255963e+061 result=40 11:42:12 Get A/D value=-858993460 result=40 11:42:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:12 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:42:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:42:12 Aux= 11:42:12 Message to Camera, serial 63630 queued 11:42:49 Received message from Master: op=PointingHead serial=63643 11:42:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:42:49 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:42:49 Point started: ret=0 11:42:49 point_skyscan result=0 11:42:50 Check angles 11:42:50 SkyScan query 11:42:50 SkyScan query done: ret=0 az=135.06<-9004 ze=36.81<-9546 Statuses=0009 0009 11:42:50 Msec=0 True Az=135.06 Ze=36.81 Az status=0009 Ze status=0009 11:42:51 Check angles 11:42:51 SkyScan query 11:42:51 SkyScan query done: ret=0 az=117.105<-7807 ze=15.45<-10970 Statuses=0009 0009 11:42:51 Msec=750 True Az=117.105 Ze=15.45 Az status=0009 Ze status=0009 11:42:51 Check angles 11:42:51 SkyScan query 11:42:52 SkyScan query done: ret=0 az=99.795<-6653 ze=-5.52<-12368 Statuses=0009 0009 11:42:52 Msec=1500 True Az=99.795 Ze=-5.52 Az status=0009 Ze status=0009 11:42:52 Check angles 11:42:52 SkyScan query 11:42:53 SkyScan query done: ret=0 az=82.275<-5485 ze=-26.475<-13765 Statuses=0009 0009 11:42:53 Msec=2250 True Az=82.275 Ze=-26.475 Az status=0009 Ze status=0009 11:42:53 Check angles 11:42:53 SkyScan query 11:42:53 SkyScan query done: ret=0 az=64.47<-4298 ze=-38.565<-14571 Statuses=0009 0008 11:42:53 Msec=3000 True Az=64.47 Ze=-38.565 Az status=0009 Ze status=0008 11:42:54 Check angles 11:42:54 SkyScan query 11:42:54 SkyScan query done: ret=0 az=46.635<-3109 ze=-38.52<-14568 Statuses=0009 0008 11:42:54 Msec=3750 True Az=46.635 Ze=-38.52 Az status=0009 Ze status=0008 11:42:54 Check angles 11:42:54 SkyScan query 11:42:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:42:55 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:42:55 Message to Master queued w/err=0: serial=63643 error=0 11:43:00 Received message from Master: op=Filter serial=63644 11:43:00 Color wheel filter change from 0 to 0 11:43:00 FLIGetFilterPos err=0 currentPosition=0 11:43:00 FLIGetStepsRemaining err=0 RemainingSteps=0 11:43:00 Filter is already there-color wheel unchanged 11:43:00 Received message from Master: op=Shutter serial=63645 11:43:00 Shutter LASER close 11:43:00 Received message from Camera: op=State serial=63647 11:43:00 GetSingleValue result=40 Value=cccccccc 11:43:00 SkyScan query 11:43:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:43:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:01 Parameters OK 11:43:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:01 Set A/D data flow result=40 11:43:01 Set A/D channel type result=40 11:43:01 Set A/D encoding result=40 11:43:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:01 Set channel filter=0.000000e+000 result=40 11:43:01 Config A/D Result=40 11:43:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:01 Get A/D filter: -9.255963e+061 result=40 11:43:01 Get A/D value=-858993460 result=40 11:43:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:01 Parameters OK 11:43:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:01 Set A/D data flow result=40 11:43:01 Set A/D channel type result=40 11:43:01 Set A/D encoding result=40 11:43:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:01 Set channel filter=0.000000e+000 result=40 11:43:01 Config A/D Result=40 11:43:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:01 Get A/D filter: -9.255963e+061 result=40 11:43:01 Get A/D value=-858993460 result=40 11:43:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:43:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:43:01 Aux= 11:43:01 Message to Camera, serial 63647 queued 11:43:38 Received message from Master: op=PointingHead serial=63660 11:43:38 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:43:38 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:43:38 Point started: ret=0 11:43:38 point_skyscan result=0 11:43:39 Check angles 11:43:39 SkyScan query 11:43:39 SkyScan query done: ret=0 az=64.275<-4285 ze=-68.61<-16574 Statuses=0009 0009 11:43:39 Msec=0 True Az=64.275 Ze=-68.61 Az status=0009 Ze status=0009 11:43:39 Check angles 11:43:39 SkyScan query 11:43:40 SkyScan query done: ret=0 az=81.66<-5444 ze=-89.595<-17973 Statuses=0009 0009 11:43:40 Msec=750 True Az=81.66 Ze=-89.595 Az status=0009 Ze status=0009 11:43:40 Check angles 11:43:40 SkyScan query 11:43:41 SkyScan query done: ret=0 az=99.645<-6643 ze=-110.985<-19399 Statuses=0009 0009 11:43:41 Msec=1500 True Az=99.645 Ze=-110.985 Az status=0009 Ze status=0009 11:43:41 Check angles 11:43:41 SkyScan query 11:43:42 SkyScan query done: ret=0 az=117.15<-7810 ze=-131.91<-20794 Statuses=0009 0009 11:43:42 Msec=2250 True Az=117.15 Ze=-131.91 Az status=0009 Ze status=0009 11:43:42 Check angles 11:43:42 SkyScan query 11:43:42 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.555<-21437 Statuses=0009 0008 11:43:42 Msec=3000 True Az=131.145 Ze=-141.555 Az status=0009 Ze status=0008 11:43:43 Check angles 11:43:43 SkyScan query 11:43:43 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 11:43:43 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 11:43:43 Message to Master queued w/err=0: serial=63660 error=0 11:43:48 Received message from Master: op=Filter serial=63661 11:43:48 Color wheel filter change from 0 to 0 11:43:48 FLIGetFilterPos err=0 currentPosition=0 11:43:48 FLIGetStepsRemaining err=0 RemainingSteps=0 11:43:48 Filter is already there-color wheel unchanged 11:43:48 Received message from Master: op=Shutter serial=63662 11:43:48 Shutter LASER close 11:43:48 Received message from Camera: op=State serial=63664 11:43:48 GetSingleValue result=40 Value=cccccccc 11:43:48 SkyScan query 11:43:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:43:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:49 Parameters OK 11:43:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:49 Set A/D data flow result=40 11:43:49 Set A/D channel type result=40 11:43:49 Set A/D encoding result=40 11:43:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:49 Set channel filter=0.000000e+000 result=40 11:43:49 Config A/D Result=40 11:43:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:49 Get A/D filter: -9.255963e+061 result=40 11:43:49 Get A/D value=-858993460 result=40 11:43:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:49 Parameters OK 11:43:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:49 Set A/D data flow result=40 11:43:49 Set A/D channel type result=40 11:43:49 Set A/D encoding result=40 11:43:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:49 Set channel filter=0.000000e+000 result=40 11:43:49 Config A/D Result=40 11:43:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:49 Get A/D filter: -9.255963e+061 result=40 11:43:49 Get A/D value=-858993460 result=40 11:43:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:49 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:43:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:43:49 Aux= 11:43:49 Message to Camera, serial 63664 queued 11:44:25 Received message from Master: op=PointingHead serial=63676 11:44:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:44:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:44:25 Point started: ret=0 11:44:25 point_skyscan result=0 11:44:26 Check angles 11:44:26 SkyScan query 11:44:26 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.27<-23418 Statuses=0009 0009 11:44:26 Msec=0 True Az=113.01 Ze=-171.27 Az status=0009 Ze status=0009 11:44:27 Check angles 11:44:27 SkyScan query 11:44:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:44:27 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:44:27 Message to Master queued w/err=0: serial=63676 error=0 11:44:32 Received message from Master: op=Filter serial=63677 11:44:32 Color wheel filter change from 0 to 0 11:44:32 FLIGetFilterPos err=0 currentPosition=0 11:44:32 FLIGetStepsRemaining err=0 RemainingSteps=0 11:44:32 Filter is already there-color wheel unchanged 11:44:32 Received message from Master: op=Shutter serial=63678 11:44:32 Shutter LASER open 11:44:33 Received message from Camera: op=State serial=63680 11:44:33 GetSingleValue result=40 Value=cccccccc 11:44:33 SkyScan query 11:44:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:44:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:33 Parameters OK 11:44:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:33 Set A/D data flow result=40 11:44:33 Set A/D channel type result=40 11:44:33 Set A/D encoding result=40 11:44:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:33 Set channel filter=0.000000e+000 result=40 11:44:33 Config A/D Result=40 11:44:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:33 Get A/D filter: -9.255963e+061 result=40 11:44:33 Get A/D value=-858993460 result=40 11:44:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:33 Parameters OK 11:44:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:33 Set A/D data flow result=40 11:44:33 Set A/D channel type result=40 11:44:33 Set A/D encoding result=40 11:44:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:33 Set channel filter=0.000000e+000 result=40 11:44:33 Config A/D Result=40 11:44:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:33 Get A/D filter: -9.255963e+061 result=40 11:44:33 Get A/D value=-858993460 result=40 11:44:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:44:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:44:33 Aux= 11:44:33 Message to Camera, serial 63680 queued 11:44:42 Received message from Master: op=Shutter serial=63690 11:44:42 Shutter LASER close 11:44:42 Received message from Master: op=PointingHead serial=63694 11:44:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:44:42 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:44:43 Point started: ret=0 11:44:43 point_skyscan result=0 11:44:43 Check angles 11:44:43 SkyScan query 11:44:44 SkyScan query done: ret=0 az=136.005<-9067 ze=-143.145<-21543 Statuses=0009 0009 11:44:44 Msec=0 True Az=136.005 Ze=-143.145 Az status=0009 Ze status=0009 11:44:44 Check angles 11:44:44 SkyScan query 11:44:45 SkyScan query done: ret=0 az=153.555<-10237 ze=-122.145<-20143 Statuses=0009 0009 11:44:45 Msec=750 True Az=153.555 Ze=-122.145 Az status=0009 Ze status=0009 11:44:45 Check angles 11:44:45 SkyScan query 11:44:45 SkyScan query done: ret=0 az=170.97<-11398 ze=-101.145<-18743 Statuses=0009 0009 11:44:45 Msec=1500 True Az=170.97 Ze=-101.145 Az status=0009 Ze status=0009 11:44:46 Check angles 11:44:46 SkyScan query 11:44:46 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.845<-17323 Statuses=0008 0009 11:44:46 Msec=2250 True Az=176.025 Ze=-79.845 Az status=0008 Ze status=0009 11:44:46 Check angles 11:44:46 SkyScan query 11:44:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.86<-15924 Statuses=0008 0009 11:44:47 Msec=3000 True Az=176.01 Ze=-58.86 Az status=0008 Ze status=0009 11:44:47 Check angles 11:44:47 SkyScan query 11:44:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:44:48 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:44:48 Message to Master queued w/err=0: serial=63694 error=0 11:44:53 Received message from Master: op=Filter serial=63695 11:44:53 Color wheel filter change from 0 to 0 11:44:53 FLIGetFilterPos err=0 currentPosition=0 11:44:53 FLIGetStepsRemaining err=0 RemainingSteps=0 11:44:53 Filter is already there-color wheel unchanged 11:44:53 Received message from Master: op=Shutter serial=63696 11:44:53 Shutter LASER close 11:44:53 Received message from Camera: op=State serial=63698 11:44:53 GetSingleValue result=40 Value=cccccccc 11:44:53 SkyScan query 11:44:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:44:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:54 Parameters OK 11:44:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:54 Set A/D data flow result=40 11:44:54 Set A/D channel type result=40 11:44:54 Set A/D encoding result=40 11:44:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:54 Set channel filter=0.000000e+000 result=40 11:44:54 Config A/D Result=40 11:44:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:54 Get A/D filter: -9.255963e+061 result=40 11:44:54 Get A/D value=-858993460 result=40 11:44:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:54 Parameters OK 11:44:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:54 Set A/D data flow result=40 11:44:54 Set A/D channel type result=40 11:44:54 Set A/D encoding result=40 11:44:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:54 Set channel filter=0.000000e+000 result=40 11:44:54 Config A/D Result=40 11:44:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:54 Get A/D filter: -9.255963e+061 result=40 11:44:54 Get A/D value=-858993460 result=40 11:44:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:44:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:44:54 Aux= 11:44:54 Message to Camera, serial 63698 queued 11:45:29 Received message from Master: op=Identify serial=63706 11:45:30 Received message from Master: op=PointingHead serial=63714 11:45:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:45:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:45:31 Point started: ret=0 11:45:31 point_skyscan result=0 11:45:31 Check angles 11:45:31 SkyScan query 11:45:32 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.75<-13450 Statuses=0009 0009 11:45:32 Msec=0 True Az=152.97 Ze=-21.75 Az status=0009 Ze status=0009 11:45:32 Check angles 11:45:32 SkyScan query 11:45:33 SkyScan query done: ret=0 az=135.645<-9043 ze=-0.75<-12050 Statuses=0009 0009 11:45:33 Msec=750 True Az=135.645 Ze=-0.75 Az status=0009 Ze status=0009 11:45:33 Check angles 11:45:33 SkyScan query 11:45:34 SkyScan query done: ret=0 az=118.065<-7871 ze=20.175<-10655 Statuses=0009 0009 11:45:34 Msec=1500 True Az=118.065 Ze=20.175 Az status=0009 Ze status=0009 11:45:34 Check angles 11:45:34 SkyScan query 11:45:34 SkyScan query done: ret=0 az=100.14<-6676 ze=41.595<-9227 Statuses=0009 0009 11:45:34 Msec=2250 True Az=100.14 Ze=41.595 Az status=0009 Ze status=0009 11:45:34 Check angles 11:45:34 SkyScan query 11:45:35 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 11:45:35 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 11:45:35 Check angles 11:45:35 SkyScan query 11:45:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:45:36 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:45:36 Message to Master queued w/err=0: serial=63714 error=0 11:45:41 Received message from Master: op=Filter serial=63715 11:45:41 Color wheel filter change from 0 to 0 11:45:41 FLIGetFilterPos err=0 currentPosition=0 11:45:41 FLIGetStepsRemaining err=0 RemainingSteps=0 11:45:41 Filter is already there-color wheel unchanged 11:45:41 Received message from Master: op=Shutter serial=63716 11:45:41 Shutter LASER close 11:45:41 Received message from Camera: op=State serial=63718 11:45:41 GetSingleValue result=40 Value=cccccccc 11:45:41 SkyScan query 11:45:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:45:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:42 Parameters OK 11:45:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:42 Set A/D data flow result=40 11:45:42 Set A/D channel type result=40 11:45:42 Set A/D encoding result=40 11:45:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 [UTC 2018-12-11 11:45:42] 11:45:42 Set channel filter=0.000000e+000 result=40 11:45:42 Config A/D Result=40 11:45:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:42 Get A/D filter: -9.255963e+061 result=40 11:45:42 Get A/D value=-858993460 result=40 11:45:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:42 Parameters OK 11:45:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:42 Set A/D data flow result=40 11:45:42 Set A/D channel type result=40 11:45:42 Set A/D encoding result=40 11:45:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:42 Set channel filter=0.000000e+000 result=40 11:45:42 Config A/D Result=40 11:45:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:42 Get A/D filter: -9.255963e+061 result=40 11:45:42 Get A/D value=-858993460 result=40 11:45:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:45:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:45:42 Aux= 11:45:42 Message to Camera, serial 63718 queued 11:46:18 Received message from Master: op=PointingHead serial=63730 11:46:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:46:18 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:46:18 Point started: ret=0 11:46:18 point_skyscan result=0 11:46:19 Check angles 11:46:19 SkyScan query 11:46:19 SkyScan query done: ret=0 az=109.41<-7294 ze=38.49<-9434 Statuses=0009 0008 11:46:19 Msec=0 True Az=109.41 Ze=38.49 Az status=0009 Ze status=0008 11:46:19 Check angles 11:46:19 SkyScan query 11:46:20 SkyScan query done: ret=0 az=127.26<-8484 ze=38.505<-9433 Statuses=0009 0008 11:46:20 Msec=750 True Az=127.26 Ze=38.505 Az status=0009 Ze status=0008 11:46:20 Check angles 11:46:20 SkyScan query 11:46:21 SkyScan query done: ret=0 az=144.705<-9647 ze=38.505<-9433 Statuses=0009 0008 11:46:21 Msec=1500 True Az=144.705 Ze=38.505 Az status=0009 Ze status=0008 11:46:21 Check angles 11:46:21 SkyScan query 11:46:21 SkyScan query done: ret=0 az=162.135<-10809 ze=38.505<-9433 Statuses=0009 0008 11:46:21 Msec=2250 True Az=162.135 Ze=38.505 Az status=0009 Ze status=0008 11:46:22 Check angles 11:46:22 SkyScan query 11:46:22 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:46:22 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:46:22 Check angles 11:46:22 SkyScan query 11:46:23 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:46:23 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:46:23 Message to Master queued w/err=0: serial=63730 error=0 11:46:28 Received message from Master: op=Filter serial=63731 11:46:28 Color wheel filter change from 0 to 0 11:46:28 FLIGetFilterPos err=0 currentPosition=0 11:46:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:46:28 Filter is already there-color wheel unchanged 11:46:28 Received message from Master: op=Shutter serial=63732 11:46:28 Shutter LASER close 11:46:28 Received message from Camera: op=State serial=63734 11:46:28 GetSingleValue result=40 Value=cccccccc 11:46:28 SkyScan query 11:46:29 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:46:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:29 Parameters OK 11:46:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:29 Set A/D data flow result=40 11:46:29 Set A/D channel type result=40 11:46:29 Set A/D encoding result=40 11:46:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:29 Set channel filter=0.000000e+000 result=40 11:46:29 Config A/D Result=40 11:46:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:29 Get A/D filter: -9.255963e+061 result=40 11:46:29 Get A/D value=-858993460 result=40 11:46:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:29 Parameters OK 11:46:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:29 Set A/D data flow result=40 11:46:29 Set A/D channel type result=40 11:46:29 Set A/D encoding result=40 11:46:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:29 Set channel filter=0.000000e+000 result=40 11:46:29 Config A/D Result=40 11:46:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:29 Get A/D filter: -9.255963e+061 result=40 11:46:29 Get A/D value=-858993460 result=40 11:46:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:46:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:46:29 Aux= 11:46:29 Message to Camera, serial 63734 queued 11:47:06 Received message from Master: op=PointingHead serial=63747 11:47:06 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:47:06 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:47:06 Point started: ret=0 11:47:06 point_skyscan result=0 11:47:07 Check angles 11:47:07 SkyScan query 11:47:07 SkyScan query done: ret=0 az=152.745<-10183 ze=8.31<-11446 Statuses=0009 0009 11:47:07 Msec=0 True Az=152.745 Ze=8.31 Az status=0009 Ze status=0009 11:47:07 Check angles 11:47:07 SkyScan query 11:47:08 SkyScan query done: ret=0 az=135.255<-9017 ze=-12.615<-12841 Statuses=0009 0009 11:47:08 Msec=750 True Az=135.255 Ze=-12.615 Az status=0009 Ze status=0009 11:47:08 Check angles 11:47:08 SkyScan query 11:47:09 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.555<-14237 Statuses=0009 0009 11:47:09 Msec=1500 True Az=117.57 Ze=-33.555 Az status=0009 Ze status=0009 11:47:09 Check angles 11:47:09 SkyScan query 11:47:10 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.555<-15437 Statuses=0009 0009 11:47:10 Msec=2250 True Az=100.23 Ze=-51.555 Az status=0009 Ze status=0009 11:47:10 Check angles 11:47:10 SkyScan query 11:47:10 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 11:47:10 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 11:47:10 Check angles 11:47:10 SkyScan query 11:47:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:47:11 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:47:11 Message to Master queued w/err=0: serial=63747 error=0 11:47:16 Received message from Master: op=Filter serial=63748 11:47:16 Color wheel filter change from 0 to 0 11:47:16 FLIGetFilterPos err=0 currentPosition=0 11:47:16 FLIGetStepsRemaining err=0 RemainingSteps=0 11:47:16 Filter is already there-color wheel unchanged 11:47:16 Received message from Master: op=Shutter serial=63749 11:47:16 Shutter LASER close 11:47:16 Received message from Camera: op=State serial=63751 11:47:16 GetSingleValue result=40 Value=cccccccc 11:47:16 SkyScan query 11:47:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:47:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:17 Parameters OK 11:47:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:17 Set A/D data flow result=40 11:47:17 Set A/D channel type result=40 11:47:17 Set A/D encoding result=40 11:47:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:17 Set channel filter=0.000000e+000 result=40 11:47:17 Config A/D Result=40 11:47:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:17 Get A/D filter: -9.255963e+061 result=40 11:47:17 Get A/D value=-858993460 result=40 11:47:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:17 Parameters OK 11:47:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:17 Set A/D data flow result=40 11:47:17 Set A/D channel type result=40 11:47:17 Set A/D encoding result=40 11:47:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:17 Set channel filter=0.000000e+000 result=40 11:47:17 Config A/D Result=40 11:47:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:17 Get A/D filter: -9.255963e+061 result=40 11:47:17 Get A/D value=-858993460 result=40 11:47:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:47:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:47:17 Aux= 11:47:17 Message to Camera, serial 63751 queued 11:47:54 Received message from Master: op=PointingHead serial=63764 11:47:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:47:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:47:54 Point started: ret=0 11:47:54 point_skyscan result=0 11:47:55 Check angles 11:47:55 SkyScan query 11:47:55 SkyScan query done: ret=0 az=109.365<-7291 ze=-81.75<-17450 Statuses=0009 0009 11:47:55 Msec=0 True Az=109.365 Ze=-81.75 Az status=0009 Ze status=0009 11:47:56 Check angles 11:47:56 SkyScan query 11:47:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.14<-18876 Statuses=0008 0009 11:47:56 Msec=750 True Az=112.995 Ze=-103.14 Az status=0008 Ze status=0009 11:47:56 Check angles 11:47:56 SkyScan query 11:47:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.095<-20273 Statuses=0008 0009 11:47:57 Msec=1500 True Az=112.995 Ze=-124.095 Az status=0008 Ze status=0009 11:47:57 Check angles 11:47:57 SkyScan query 11:47:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.02<-21668 Statuses=0008 0009 11:47:58 Msec=2250 True Az=112.995 Ze=-145.02 Az status=0008 Ze status=0009 11:47:58 Check angles 11:47:58 SkyScan query 11:47:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.005<-23067 Statuses=0008 0009 11:47:58 Msec=3000 True Az=112.995 Ze=-166.005 Az status=0008 Ze status=0009 11:47:59 Check angles 11:47:59 SkyScan query 11:47:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:47:59 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:47:59 Message to Master queued w/err=0: serial=63764 error=0 11:48:04 Received message from Master: op=Filter serial=63765 11:48:04 Color wheel filter change from 0 to 0 11:48:04 FLIGetFilterPos err=0 currentPosition=0 11:48:04 FLIGetStepsRemaining err=0 RemainingSteps=0 11:48:04 Filter is already there-color wheel unchanged 11:48:04 Received message from Master: op=Shutter serial=63766 11:48:04 Shutter LASER open 11:48:04 Received message from Camera: op=State serial=63768 11:48:04 GetSingleValue result=40 Value=cccccccc 11:48:04 SkyScan query 11:48:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:48:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:05 Parameters OK 11:48:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:05 Set A/D data flow result=40 11:48:05 Set A/D channel type result=40 11:48:05 Set A/D encoding result=40 11:48:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:05 Set channel filter=0.000000e+000 result=40 11:48:05 Config A/D Result=40 11:48:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:05 Get A/D filter: -9.255963e+061 result=40 11:48:05 Get A/D value=-858993460 result=40 11:48:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:05 Parameters OK 11:48:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:05 Set A/D data flow result=40 11:48:05 Set A/D channel type result=40 11:48:05 Set A/D encoding result=40 11:48:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:05 Set channel filter=0.000000e+000 result=40 11:48:05 Config A/D Result=40 11:48:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:05 Get A/D filter: -9.255963e+061 result=40 11:48:05 Get A/D value=-858993460 result=40 11:48:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:48:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:48:05 Aux= 11:48:05 Message to Camera, serial 63768 queued 11:48:13 Received message from Master: op=Shutter serial=63778 11:48:13 Shutter LASER close 11:48:14 Received message from Master: op=PointingHead serial=63782 11:48:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:48:14 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:48:14 Point started: ret=0 11:48:14 point_skyscan result=0 11:48:15 Check angles 11:48:15 SkyScan query 11:48:16 SkyScan query done: ret=0 az=89.685<-5979 ze=157.26<-1516 Statuses=0009 0009 11:48:16 Msec=0 True Az=89.685 Ze=157.26 Az status=0009 Ze status=0009 11:48:16 Check angles 11:48:16 SkyScan query 11:48:16 SkyScan query done: ret=0 az=71.835<-4789 ze=135.84<-2944 Statuses=0009 0009 11:48:16 Msec=750 True Az=71.835 Ze=135.84 Az status=0009 Ze status=0009 11:48:17 Check angles 11:48:17 SkyScan query 11:48:17 SkyScan query done: ret=0 az=54.69<-3646 ze=114.885<-4341 Statuses=0009 0009 11:48:17 Msec=1500 True Az=54.69 Ze=114.885 Az status=0009 Ze status=0009 11:48:17 Check angles 11:48:17 SkyScan query 11:48:18 SkyScan query done: ret=0 az=40.92<-2728 ze=93.915<-5739 Statuses=0009 0009 11:48:18 Msec=2250 True Az=40.92 Ze=93.915 Az status=0009 Ze status=0009 11:48:18 Check angles 11:48:18 SkyScan query 11:48:19 SkyScan query done: ret=0 az=40.995<-2733 ze=72.945<-7137 Statuses=0008 0009 11:48:19 Msec=3000 True Az=40.995 Ze=72.945 Az status=0008 Ze status=0009 11:48:19 Check angles 11:48:19 SkyScan query 11:48:19 SkyScan query done: ret=0 az=40.995<-2733 ze=52.56<-8496 Statuses=0008 0009 11:48:19 Msec=3750 True Az=40.995 Ze=52.56 Az status=0008 Ze status=0009 11:48:20 Check angles 11:48:20 SkyScan query 11:48:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:48:20 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:48:20 Message to Master queued w/err=0: serial=63782 error=0 11:48:25 Received message from Master: op=Filter serial=63783 11:48:25 Color wheel filter change from 0 to 0 11:48:25 FLIGetFilterPos err=0 currentPosition=0 11:48:25 FLIGetStepsRemaining err=0 RemainingSteps=0 11:48:25 Filter is already there-color wheel unchanged 11:48:25 Received message from Master: op=Shutter serial=63784 11:48:25 Shutter LASER close 11:48:26 Received message from Camera: op=State serial=63786 11:48:26 GetSingleValue result=40 Value=cccccccc 11:48:26 SkyScan query 11:48:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:48:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:26 Parameters OK 11:48:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:26 Set A/D data flow result=40 11:48:26 Set A/D channel type result=40 11:48:26 Set A/D encoding result=40 11:48:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:26 Set channel filter=0.000000e+000 result=40 11:48:26 Config A/D Result=40 11:48:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:26 Get A/D filter: -9.255963e+061 result=40 11:48:26 Get A/D value=-858993460 result=40 11:48:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:26 Parameters OK 11:48:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:26 Set A/D data flow result=40 11:48:26 Set A/D channel type result=40 11:48:26 Set A/D encoding result=40 11:48:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:26 Set channel filter=0.000000e+000 result=40 11:48:26 Config A/D Result=40 11:48:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:26 Get A/D filter: -9.255963e+061 result=40 11:48:26 Get A/D value=-858993460 result=40 11:48:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:48:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:48:26 Aux= 11:48:26 Message to Camera, serial 63786 queued 11:49:03 Received message from Master: op=PointingHead serial=63799 11:49:03 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:49:03 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:49:03 Point started: ret=0 11:49:03 point_skyscan result=0 11:49:04 Check angles 11:49:04 SkyScan query 11:49:05 SkyScan query done: ret=0 az=64.395<-4293 ze=66.555<-7563 Statuses=0009 0008 11:49:05 Msec=0 True Az=64.395 Ze=66.555 Az status=0009 Ze status=0008 11:49:05 Check angles 11:49:05 SkyScan query 11:49:05 SkyScan query done: ret=0 az=81.525<-5435 ze=66.495<-7567 Statuses=0009 0008 11:49:05 Msec=750 True Az=81.525 Ze=66.495 Az status=0009 Ze status=0008 11:49:06 Check angles 11:49:06 SkyScan query 11:49:06 SkyScan query done: ret=0 az=99.57<-6638 ze=66.495<-7567 Statuses=0009 0008 11:49:06 Msec=1500 True Az=99.57 Ze=66.495 Az status=0009 Ze status=0008 11:49:06 Check angles 11:49:06 SkyScan query 11:49:07 SkyScan query done: ret=0 az=117.06<-7804 ze=66.495<-7567 Statuses=0009 0008 11:49:07 Msec=2250 True Az=117.06 Ze=66.495 Az status=0009 Ze status=0008 11:49:07 Check angles 11:49:07 SkyScan query 11:49:08 SkyScan query done: ret=0 az=134.52<-8968 ze=66.495<-7567 Statuses=0009 0008 11:49:08 Msec=3000 True Az=134.52 Ze=66.495 Az status=0009 Ze status=0008 11:49:08 Check angles 11:49:08 SkyScan query 11:49:08 SkyScan query done: ret=0 az=151.98<-10132 ze=66.495<-7567 Statuses=0009 0008 11:49:08 Msec=3750 True Az=151.98 Ze=66.495 Az status=0009 Ze status=0008 11:49:09 Check angles 11:49:09 SkyScan query 11:49:09 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 11:49:09 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 11:49:09 Message to Master queued w/err=0: serial=63799 error=0 11:49:14 Received message from Master: op=Filter serial=63800 11:49:14 Color wheel filter change from 0 to 0 11:49:14 FLIGetFilterPos err=0 currentPosition=0 11:49:14 FLIGetStepsRemaining err=0 RemainingSteps=0 11:49:14 Filter is already there-color wheel unchanged 11:49:14 Received message from Master: op=Shutter serial=63801 11:49:14 Shutter LASER close 11:49:14 Received message from Camera: op=State serial=63803 11:49:14 GetSingleValue result=40 Value=cccccccc 11:49:14 SkyScan query 11:49:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:49:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:15 Parameters OK 11:49:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:15 Set A/D data flow result=40 11:49:15 Set A/D channel type result=40 11:49:15 Set A/D encoding result=40 11:49:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:15 Set channel filter=0.000000e+000 result=40 11:49:15 Config A/D Result=40 11:49:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:15 Get A/D filter: -9.255963e+061 result=40 11:49:15 Get A/D value=-858993460 result=40 11:49:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:15 Parameters OK 11:49:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:15 Set A/D data flow result=40 11:49:15 Set A/D channel type result=40 11:49:15 Set A/D encoding result=40 11:49:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:15 Set channel filter=0.000000e+000 result=40 11:49:15 Config A/D Result=40 11:49:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:15 Get A/D filter: -9.255963e+061 result=40 11:49:15 Get A/D value=-858993460 result=40 11:49:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:15 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:49:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:49:15 Aux= 11:49:15 Message to Camera, serial 63803 queued 11:49:52 Received message from Master: op=PointingHead serial=63816 11:49:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:49:52 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:49:52 Point started: ret=0 11:49:52 point_skyscan result=0 11:49:53 Check angles 11:49:53 SkyScan query 11:49:53 SkyScan query done: ret=0 az=134.745<-8983 ze=36.42<-9572 Statuses=0009 0009 11:49:53 Msec=0 True Az=134.745 Ze=36.42 Az status=0009 Ze status=0009 11:49:54 Check angles 11:49:54 SkyScan query 11:49:54 SkyScan query done: ret=0 az=117.24<-7816 ze=15.495<-10967 Statuses=0009 0009 11:49:54 Msec=750 True Az=117.24 Ze=15.495 Az status=0009 Ze status=0009 11:49:54 Check angles 11:49:54 SkyScan query 11:49:55 SkyScan query done: ret=0 az=99.855<-6657 ze=-5.49<-12366 Statuses=0009 0009 11:49:55 Msec=1500 True Az=99.855 Ze=-5.49 Az status=0009 Ze status=0009 11:49:55 Check angles 11:49:55 SkyScan query 11:49:56 SkyScan query done: ret=0 az=82.365<-5491 ze=-26.445<-13763 Statuses=0009 0009 11:49:56 Msec=2250 True Az=82.365 Ze=-26.445 Az status=0009 Ze status=0009 11:49:56 Check angles 11:49:56 SkyScan query 11:49:56 SkyScan query done: ret=0 az=64.5<-4300 ze=-38.58<-14572 Statuses=0009 0008 11:49:56 Msec=3000 True Az=64.5 Ze=-38.58 Az status=0009 Ze status=0008 11:49:57 Check angles 11:49:57 SkyScan query 11:49:57 SkyScan query done: ret=0 az=46.665<-3111 ze=-38.52<-14568 Statuses=0009 0008 11:49:57 Msec=3750 True Az=46.665 Ze=-38.52 Az status=0009 Ze status=0008 11:49:57 Check angles 11:49:57 SkyScan query 11:49:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:49:58 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:49:58 Message to Master queued w/err=0: serial=63816 error=0 11:50:03 Received message from Master: op=Filter serial=63817 11:50:03 Color wheel filter change from 0 to 0 11:50:03 FLIGetFilterPos err=0 currentPosition=0 11:50:03 FLIGetStepsRemaining err=0 RemainingSteps=0 11:50:03 Filter is already there-color wheel unchanged 11:50:03 Received message from Master: op=Shutter serial=63818 11:50:03 Shutter LASER close 11:50:03 Received message from Camera: op=State serial=63820 11:50:03 GetSingleValue result=40 Value=cccccccc 11:50:03 SkyScan query 11:50:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:50:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:04 Parameters OK 11:50:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:04 Set A/D data flow result=40 11:50:04 Set A/D channel type result=40 11:50:04 Set A/D encoding result=40 11:50:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:04 Set channel filter=0.000000e+000 result=40 11:50:04 Config A/D Result=40 11:50:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:04 Get A/D filter: -9.255963e+061 result=40 11:50:04 Get A/D value=-858993460 result=40 11:50:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:04 Parameters OK 11:50:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:04 Set A/D data flow result=40 11:50:04 Set A/D channel type result=40 11:50:04 Set A/D encoding result=40 11:50:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:04 Set channel filter=0.000000e+000 result=40 11:50:04 Config A/D Result=40 11:50:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:04 Get A/D filter: -9.255963e+061 result=40 11:50:04 Get A/D value=-858993460 result=40 11:50:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:50:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:50:04 Aux= 11:50:04 Message to Camera, serial 63820 queued 11:50:41 Received message from Master: op=PointingHead serial=63833 11:50:41 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:50:41 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:50:41 Point started: ret=0 11:50:41 point_skyscan result=0 11:50:42 Check angles 11:50:42 SkyScan query 11:50:42 SkyScan query done: ret=0 az=64.26<-4284 ze=-68.625<-16575 Statuses=0009 0009 11:50:42 Msec=0 True Az=64.26 Ze=-68.625 Az status=0009 Ze status=0009 11:50:43 Check angles 11:50:43 SkyScan query 11:50:43 SkyScan query done: ret=0 az=82.08<-5472 ze=-90.03<-18002 Statuses=0009 0009 11:50:43 Msec=750 True Az=82.08 Ze=-90.03 Az status=0009 Ze status=0009 11:50:43 Check angles 11:50:43 SkyScan query 11:50:44 SkyScan query done: ret=0 az=99.63<-6642 ze=-110.97<-19398 Statuses=0009 0009 11:50:44 Msec=1500 True Az=99.63 Ze=-110.97 Az status=0009 Ze status=0009 11:50:44 Check angles 11:50:44 SkyScan query 11:50:45 SkyScan query done: ret=0 az=117.21<-7814 ze=-131.895<-20793 Statuses=0009 0009 11:50:45 Msec=2250 True Az=117.21 Ze=-131.895 Az status=0009 Ze status=0009 11:50:45 Check angles 11:50:45 SkyScan query 11:50:45 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 11:50:45 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 11:50:46 Check angles 11:50:46 SkyScan query 11:50:46 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:50:46 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:50:46 Message to Master queued w/err=0: serial=63833 error=0 11:50:51 Received message from Master: op=Filter serial=63834 11:50:51 Color wheel filter change from 0 to 0 11:50:51 FLIGetFilterPos err=0 currentPosition=0 11:50:51 FLIGetStepsRemaining err=0 RemainingSteps=0 11:50:51 Filter is already there-color wheel unchanged 11:50:51 Received message from Master: op=Shutter serial=63835 11:50:51 Shutter LASER close 11:50:51 Received message from Camera: op=State serial=63837 11:50:51 GetSingleValue result=40 Value=cccccccc 11:50:51 SkyScan query 11:50:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:50:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:52 Parameters OK 11:50:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:52 Set A/D data flow result=40 11:50:52 Set A/D channel type result=40 11:50:52 Set A/D encoding result=40 11:50:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:52 Set channel filter=0.000000e+000 result=40 11:50:52 Config A/D Result=40 11:50:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:52 Get A/D filter: -9.255963e+061 result=40 11:50:52 Get A/D value=-858993460 result=40 11:50:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:52 Parameters OK 11:50:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:52 Set A/D data flow result=40 11:50:52 Set A/D channel type result=40 11:50:52 Set A/D encoding result=40 11:50:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:52 Set channel filter=0.000000e+000 result=40 11:50:52 Config A/D Result=40 11:50:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:52 Get A/D filter: -9.255963e+061 result=40 11:50:52 Get A/D value=-858993460 result=40 11:50:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:52 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:50:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:50:52 Aux= 11:50:52 Message to Camera, serial 63837 queued 11:51:29 Received message from Master: op=PointingHead serial=63850 11:51:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:51:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:51:29 Point started: ret=0 11:51:29 point_skyscan result=0 11:51:30 Check angles 11:51:30 SkyScan query 11:51:30 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.255<-23417 Statuses=0009 0009 11:51:30 Msec=0 True Az=113.01 Ze=-171.255 Az status=0009 Ze status=0009 11:51:31 Check angles 11:51:31 SkyScan query 11:51:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:51:31 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:51:31 Message to Master queued w/err=0: serial=63850 error=0 11:51:36 Received message from Master: op=Filter serial=63851 11:51:36 Color wheel filter change from 0 to 0 11:51:36 FLIGetFilterPos err=0 currentPosition=0 11:51:36 FLIGetStepsRemaining err=0 RemainingSteps=0 11:51:36 Filter is already there-color wheel unchanged 11:51:36 Received message from Master: op=Shutter serial=63852 11:51:36 Shutter LASER open 11:51:36 Received message from Camera: op=State serial=63854 11:51:36 GetSingleValue result=40 Value=cccccccc 11:51:36 SkyScan query 11:51:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:51:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:37 Parameters OK 11:51:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:37 Set A/D data flow result=40 11:51:37 Set A/D channel type result=40 11:51:37 Set A/D encoding result=40 11:51:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:37 Set channel filter=0.000000e+000 result=40 11:51:37 Config A/D Result=40 11:51:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:37 Get A/D filter: -9.255963e+061 result=40 11:51:37 Get A/D value=-858993460 result=40 11:51:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:37 Parameters OK 11:51:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:37 Set A/D data flow result=40 11:51:37 Set A/D channel type result=40 11:51:37 Set A/D encoding result=40 11:51:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:37 Set channel filter=0.000000e+000 result=40 11:51:37 Config A/D Result=40 11:51:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:37 Get A/D filter: -9.255963e+061 result=40 11:51:37 Get A/D value=-858993460 result=40 11:51:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:51:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:51:37 Aux= 11:51:37 Message to Camera, serial 63854 queued 11:51:45 Received message from Master: op=Shutter serial=63864 11:51:46 Shutter LASER close 11:51:46 Received message from Master: op=PointingHead serial=63868 11:51:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:51:46 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:51:46 Point started: ret=0 11:51:46 point_skyscan result=0 11:51:47 Check angles 11:51:47 SkyScan query 11:51:48 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.385<-21559 Statuses=0009 0009 11:51:48 Msec=0 True Az=135.75 Ze=-143.385 Az status=0009 Ze status=0009 11:51:48 Check angles 11:51:48 SkyScan query 11:51:48 SkyScan query done: ret=0 az=153.615<-10241 ze=-121.965<-20131 Statuses=0009 0009 11:51:48 Msec=750 True Az=153.615 Ze=-121.965 Az status=0009 Ze status=0009 11:51:49 Check angles 11:51:49 SkyScan query 11:51:49 SkyScan query done: ret=0 az=171.48<-11432 ze=-100.53<-18702 Statuses=0009 0009 11:51:49 Msec=1500 True Az=171.48 Ze=-100.53 Az status=0009 Ze status=0009 11:51:49 Check angles 11:51:49 SkyScan query 11:51:50 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.65<-17310 Statuses=0008 0009 11:51:50 Msec=2250 True Az=176.025 Ze=-79.65 Az status=0008 Ze status=0009 11:51:50 Check angles 11:51:50 SkyScan query 11:51:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.665<-15911 Statuses=0008 0009 11:51:51 Msec=3000 True Az=176.01 Ze=-58.665 Az status=0008 Ze status=0009 11:51:51 Check angles 11:51:51 SkyScan query 11:51:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:51:52 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:51:52 Message to Master queued w/err=0: serial=63868 error=0 11:51:57 Received message from Master: op=Filter serial=63869 11:51:57 Color wheel filter change from 0 to 0 11:51:57 FLIGetFilterPos err=0 currentPosition=0 11:51:57 FLIGetStepsRemaining err=0 RemainingSteps=0 11:51:57 Filter is already there-color wheel unchanged 11:51:57 Received message from Master: op=Shutter serial=63870 11:51:57 Shutter LASER close 11:51:57 Received message from Camera: op=State serial=63872 11:51:57 GetSingleValue result=40 Value=cccccccc 11:51:57 SkyScan query 11:51:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:51:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:57 Parameters OK 11:51:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:57 Set A/D data flow result=40 11:51:57 Set A/D channel type result=40 11:51:57 Set A/D encoding result=40 11:51:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:57 Set channel filter=0.000000e+000 result=40 11:51:57 Config A/D Result=40 11:51:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:57 Get A/D filter: -9.255963e+061 result=40 11:51:57 Get A/D value=-858993460 result=40 11:51:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:57 Parameters OK 11:51:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:57 Set A/D data flow result=40 11:51:57 Set A/D channel type result=40 11:51:57 Set A/D encoding result=40 11:51:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:57 Set channel filter=0.000000e+000 result=40 11:51:57 Config A/D Result=40 11:51:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:57 Get A/D filter: -9.255963e+061 result=40 11:51:57 Get A/D value=-858993460 result=40 11:51:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:51:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:51:57 Aux= 11:51:57 Message to Camera, serial 63872 queued 11:52:34 Received message from Master: op=PointingHead serial=63885 11:52:34 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:52:34 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:52:35 Point started: ret=0 11:52:35 point_skyscan result=0 11:52:35 Check angles 11:52:35 SkyScan query 11:52:36 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.9<-13460 Statuses=0009 0009 11:52:36 Msec=0 True Az=153.105 Ze=-21.9 Az status=0009 Ze status=0009 11:52:36 Check angles 11:52:36 SkyScan query 11:52:37 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.465<-12031 Statuses=0009 0009 11:52:37 Msec=750 True Az=135.405 Ze=-0.465 Az status=0009 Ze status=0009 11:52:37 Check angles 11:52:37 SkyScan query 11:52:37 SkyScan query done: ret=0 az=117.375<-7825 ze=20.925<-10605 Statuses=0009 0009 11:52:37 Msec=1500 True Az=117.375 Ze=20.925 Az status=0009 Ze status=0009 11:52:38 Check angles 11:52:38 SkyScan query 11:52:38 SkyScan query done: ret=0 az=100.035<-6669 ze=41.865<-9209 Statuses=0009 0009 11:52:38 Msec=2250 True Az=100.035 Ze=41.865 Az status=0009 Ze status=0009 11:52:38 Check angles 11:52:38 SkyScan query 11:52:39 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 11:52:39 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 11:52:39 Check angles 11:52:39 SkyScan query 11:52:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:52:40 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:52:40 Message to Master queued w/err=0: serial=63885 error=0 11:52:45 Received message from Master: op=Filter serial=63886 11:52:45 Color wheel filter change from 0 to 0 11:52:45 FLIGetFilterPos err=0 currentPosition=0 11:52:45 FLIGetStepsRemaining err=0 RemainingSteps=0 11:52:45 Filter is already there-color wheel unchanged 11:52:45 Received message from Master: op=Shutter serial=63887 11:52:45 Shutter LASER close 11:52:45 Received message from Camera: op=State serial=63889 11:52:45 GetSingleValue result=40 Value=cccccccc 11:52:45 SkyScan query 11:52:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:52:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:46 Parameters OK 11:52:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:46 Set A/D data flow result=40 11:52:46 Set A/D channel type result=40 11:52:46 Set A/D encoding result=40 11:52:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:46 Set channel filter=0.000000e+000 result=40 11:52:46 Config A/D Result=40 11:52:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:46 Get A/D filter: -9.255963e+061 result=40 11:52:46 Get A/D value=-858993460 result=40 11:52:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:46 Parameters OK 11:52:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:46 Set A/D data flow result=40 11:52:46 Set A/D channel type result=40 11:52:46 Set A/D encoding result=40 11:52:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:46 Set channel filter=0.000000e+000 result=40 11:52:46 Config A/D Result=40 11:52:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:46 Get A/D filter: -9.255963e+061 result=40 11:52:46 Get A/D value=-858993460 result=40 11:52:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:52:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:52:46 Aux= 11:52:46 Message to Camera, serial 63889 queued 11:53:21 Received message from Master: op=PointingHead serial=63901 11:53:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:53:21 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:53:22 Point started: ret=0 11:53:22 point_skyscan result=0 11:53:23 Check angles 11:53:23 SkyScan query 11:53:23 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 11:53:23 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 11:53:23 Check angles 11:53:23 SkyScan query 11:53:24 SkyScan query done: ret=0 az=126.495<-8433 ze=38.505<-9433 Statuses=0009 0008 11:53:24 Msec=750 True Az=126.495 Ze=38.505 Az status=0009 Ze status=0008 11:53:24 Check angles 11:53:24 SkyScan query 11:53:25 SkyScan query done: ret=0 az=144.345<-9623 ze=38.505<-9433 Statuses=0009 0008 11:53:25 Msec=1500 True Az=144.345 Ze=38.505 Az status=0009 Ze status=0008 11:53:25 Check angles 11:53:25 SkyScan query 11:53:25 SkyScan query done: ret=0 az=161.67<-10778 ze=38.505<-9433 Statuses=0009 0008 11:53:25 Msec=2250 True Az=161.67 Ze=38.505 Az status=0009 Ze status=0008 11:53:26 Check angles 11:53:26 SkyScan query 11:53:26 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:53:26 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:53:26 Check angles 11:53:26 SkyScan query 11:53:27 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:53:27 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:53:27 Message to Master queued w/err=0: serial=63901 error=0 11:53:32 Received message from Master: op=Filter serial=63902 11:53:32 Color wheel filter change from 0 to 0 11:53:32 FLIGetFilterPos err=0 currentPosition=0 11:53:32 FLIGetStepsRemaining err=0 RemainingSteps=0 11:53:32 Filter is already there-color wheel unchanged 11:53:32 Received message from Master: op=Shutter serial=63903 11:53:32 Shutter LASER close 11:53:32 Received message from Camera: op=State serial=63905 11:53:32 GetSingleValue result=40 Value=cccccccc 11:53:32 SkyScan query 11:53:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:53:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:33 Parameters OK 11:53:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:33 Set A/D data flow result=40 11:53:33 Set A/D channel type result=40 11:53:33 Set A/D encoding result=40 11:53:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:33 Set channel filter=0.000000e+000 result=40 11:53:33 Config A/D Result=40 11:53:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:33 Get A/D filter: -9.255963e+061 result=40 11:53:33 Get A/D value=-858993460 result=40 11:53:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:33 Parameters OK 11:53:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:33 Set A/D data flow result=40 11:53:33 Set A/D channel type result=40 11:53:33 Set A/D encoding result=40 11:53:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:33 Set channel filter=0.000000e+000 result=40 11:53:33 Config A/D Result=40 11:53:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:33 Get A/D filter: -9.255963e+061 result=40 11:53:33 Get A/D value=-858993460 result=40 11:53:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:53:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:53:33 Aux= 11:53:33 Message to Camera, serial 63905 queued 11:54:10 Received message from Master: op=PointingHead serial=63918 11:54:10 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:54:10 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:54:10 Point started: ret=0 11:54:10 point_skyscan result=0 11:54:11 Check angles 11:54:11 SkyScan query 11:54:11 SkyScan query done: ret=0 az=152.625<-10175 ze=8.16<-11456 Statuses=0009 0009 11:54:11 Msec=0 True Az=152.625 Ze=8.16 Az status=0009 Ze status=0009 11:54:11 Check angles 11:54:11 SkyScan query 11:54:12 SkyScan query done: ret=0 az=135.15<-9010 ze=-12.78<-12852 Statuses=0009 0009 11:54:12 Msec=750 True Az=135.15 Ze=-12.78 Az status=0009 Ze status=0009 11:54:12 Check angles 11:54:12 SkyScan query 11:54:13 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.72<-14248 Statuses=0009 0009 11:54:13 Msec=1500 True Az=117.54 Ze=-33.72 Az status=0009 Ze status=0009 11:54:13 Check angles 11:54:13 SkyScan query 11:54:13 SkyScan query done: ret=0 az=100.2<-6680 ze=-51.57<-15438 Statuses=0009 0009 11:54:13 Msec=2250 True Az=100.2 Ze=-51.57 Az status=0009 Ze status=0009 11:54:14 Check angles 11:54:14 SkyScan query 11:54:14 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 11:54:14 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 11:54:14 Check angles 11:54:14 SkyScan query 11:54:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:54:15 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:54:15 Message to Master queued w/err=0: serial=63918 error=0 11:54:20 Received message from Master: op=Filter serial=63919 11:54:20 Color wheel filter change from 0 to 0 11:54:20 FLIGetFilterPos err=0 currentPosition=0 11:54:20 FLIGetStepsRemaining err=0 RemainingSteps=0 11:54:20 Filter is already there-color wheel unchanged 11:54:20 Received message from Master: op=Shutter serial=63920 11:54:20 Shutter LASER close 11:54:20 Received message from Camera: op=State serial=63922 11:54:20 GetSingleValue result=40 Value=cccccccc 11:54:20 SkyScan query 11:54:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:54:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:21 Parameters OK 11:54:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:21 Set A/D data flow result=40 11:54:21 Set A/D channel type result=40 11:54:21 Set A/D encoding result=40 11:54:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:21 Set channel filter=0.000000e+000 result=40 11:54:21 Config A/D Result=40 11:54:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:21 Get A/D filter: -9.255963e+061 result=40 11:54:21 Get A/D value=-858993460 result=40 11:54:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:21 Parameters OK 11:54:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:21 Set A/D data flow result=40 11:54:21 Set A/D channel type result=40 11:54:21 Set A/D encoding result=40 11:54:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:21 Set channel filter=0.000000e+000 result=40 11:54:21 Config A/D Result=40 11:54:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:21 Get A/D filter: -9.255963e+061 result=40 11:54:21 Get A/D value=-858993460 result=40 11:54:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:54:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:54:21 Aux= 11:54:21 Message to Camera, serial 63922 queued 11:54:58 Received message from Master: op=PointingHead serial=63935 11:54:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:54:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:54:58 Point started: ret=0 11:54:58 point_skyscan result=0 11:54:59 Check angles 11:54:59 SkyScan query 11:54:59 SkyScan query done: ret=0 az=108.945<-7263 ze=-81.24<-17416 Statuses=0009 0009 11:54:59 Msec=0 True Az=108.945 Ze=-81.24 Az status=0009 Ze status=0009 11:54:59 Check angles 11:54:59 SkyScan query 11:55:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.21<-18814 Statuses=0008 0009 11:55:00 Msec=750 True Az=112.995 Ze=-102.21 Az status=0008 Ze status=0009 11:55:00 Check angles 11:55:00 SkyScan query 11:55:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.6<-20240 Statuses=0008 0009 11:55:01 Msec=1500 True Az=112.995 Ze=-123.6 Az status=0008 Ze status=0009 11:55:01 Check angles 11:55:01 SkyScan query 11:55:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.555<-21637 Statuses=0008 0009 11:55:02 Msec=2250 True Az=112.995 Ze=-144.555 Az status=0008 Ze status=0009 11:55:02 Check angles 11:55:02 SkyScan query 11:55:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.495<-23033 Statuses=0008 0009 11:55:02 Msec=3000 True Az=112.995 Ze=-165.495 Az status=0008 Ze status=0009 11:55:02 Check angles 11:55:02 SkyScan query 11:55:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:55:03 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:55:03 Message to Master queued w/err=0: serial=63935 error=0 11:55:08 Received message from Master: op=Filter serial=63936 11:55:08 Color wheel filter change from 0 to 0 11:55:08 FLIGetFilterPos err=0 currentPosition=0 11:55:08 FLIGetStepsRemaining err=0 RemainingSteps=0 11:55:08 Filter is already there-color wheel unchanged 11:55:08 Received message from Master: op=Shutter serial=63937 11:55:08 Shutter LASER open 11:55:08 Received message from Camera: op=State serial=63939 11:55:08 GetSingleValue result=40 Value=cccccccc 11:55:08 SkyScan query 11:55:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:55:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:09 Parameters OK 11:55:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:09 Set A/D data flow result=40 11:55:09 Set A/D channel type result=40 11:55:09 Set A/D encoding result=40 11:55:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:09 Set channel filter=0.000000e+000 result=40 11:55:09 Config A/D Result=40 11:55:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:09 Get A/D filter: -9.255963e+061 result=40 11:55:09 Get A/D value=-858993460 result=40 11:55:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:09 Parameters OK 11:55:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:09 Set A/D data flow result=40 11:55:09 Set A/D channel type result=40 11:55:09 Set A/D encoding result=40 11:55:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:09 Set channel filter=0.000000e+000 result=40 11:55:09 Config A/D Result=40 11:55:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:09 Get A/D filter: -9.255963e+061 result=40 11:55:09 Get A/D value=-858993460 result=40 11:55:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:55:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:55:09 Aux= 11:55:09 Message to Camera, serial 63939 queued 11:55:17 Received message from Master: op=Shutter serial=63949 11:55:17 Shutter LASER close 11:55:18 Received message from Master: op=PointingHead serial=63953 11:55:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:55:18 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:55:18 Point started: ret=0 11:55:18 point_skyscan result=0 11:55:19 Check angles 11:55:19 SkyScan query 11:55:19 SkyScan query done: ret=0 az=90.105<-6007 ze=157.425<-1505 Statuses=0009 0009 11:55:19 Msec=0 True Az=90.105 Ze=157.425 Az status=0009 Ze status=0009 11:55:20 Check angles 11:55:20 SkyScan query 11:55:20 SkyScan query done: ret=0 az=72.645<-4843 ze=136.47<-2902 Statuses=0009 0009 11:55:20 Msec=750 True Az=72.645 Ze=136.47 Az status=0009 Ze status=0009 11:55:20 Check angles 11:55:20 SkyScan query 11:55:21 SkyScan query done: ret=0 az=54.84<-3656 ze=115.095<-4327 Statuses=0009 0009 11:55:21 Msec=1500 True Az=54.84 Ze=115.095 Az status=0009 Ze status=0009 11:55:21 Check angles 11:55:21 SkyScan query 11:55:22 SkyScan query done: ret=0 az=40.92<-2728 ze=93.705<-5753 Statuses=0009 0009 11:55:22 Msec=2250 True Az=40.92 Ze=93.705 Az status=0009 Ze status=0009 11:55:22 Check angles 11:55:22 SkyScan query 11:55:23 SkyScan query done: ret=0 az=40.995<-2733 ze=72.72<-7152 Statuses=0008 0009 11:55:23 Msec=3000 True Az=40.995 Ze=72.72 Az status=0008 Ze status=0009 11:55:23 Check angles 11:55:23 SkyScan query 11:55:23 SkyScan query done: ret=0 az=40.995<-2733 ze=52.44<-8504 Statuses=0008 0009 11:55:23 Msec=3750 True Az=40.995 Ze=52.44 Az status=0008 Ze status=0009 11:55:23 Check angles 11:55:23 SkyScan query 11:55:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:55:24 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:55:24 Message to Master queued w/err=0: serial=63953 error=0 11:55:29 Received message from Master: op=Filter serial=63954 11:55:29 Color wheel filter change from 0 to 0 11:55:29 FLIGetFilterPos err=0 currentPosition=0 11:55:29 FLIGetStepsRemaining err=0 RemainingSteps=0 11:55:29 Filter is already there-color wheel unchanged 11:55:29 Received message from Master: op=Shutter serial=63955 11:55:29 Shutter LASER close 11:55:29 Received message from Camera: op=State serial=63957 11:55:29 GetSingleValue result=40 Value=cccccccc 11:55:29 SkyScan query 11:55:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:55:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:30 Parameters OK 11:55:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:30 Set A/D data flow result=40 11:55:30 Set A/D channel type result=40 11:55:30 Set A/D encoding result=40 [UTC 2018-12-11 11:55:30] 11:55:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:30 Set channel filter=0.000000e+000 result=40 11:55:30 Config A/D Result=40 11:55:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:30 Get A/D filter: -9.255963e+061 result=40 11:55:30 Get A/D value=-858993460 result=40 11:55:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:30 Parameters OK 11:55:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:30 Set A/D data flow result=40 11:55:30 Set A/D channel type result=40 11:55:30 Set A/D encoding result=40 11:55:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:30 Set channel filter=0.000000e+000 result=40 11:55:30 Config A/D Result=40 11:55:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:30 Get A/D filter: -9.255963e+061 result=40 11:55:30 Get A/D value=-858993460 result=40 11:55:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:55:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:55:30 Aux= 11:55:30 Message to Camera, serial 63957 queued [UTC 2018-12-11 11:55:54] 11:56:07 Received message from Master: op=PointingHead serial=63970 11:56:07 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:56:07 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:56:07 Point started: ret=0 11:56:07 point_skyscan result=0 11:56:08 Check angles 11:56:08 SkyScan query 11:56:08 SkyScan query done: ret=0 az=64.215<-4281 ze=66.57<-7562 Statuses=0009 0008 11:56:08 Msec=0 True Az=64.215 Ze=66.57 Az status=0009 Ze status=0008 11:56:09 Check angles 11:56:09 SkyScan query 11:56:09 SkyScan query done: ret=0 az=81.615<-5441 ze=66.51<-7566 Statuses=0009 0008 11:56:09 Msec=750 True Az=81.615 Ze=66.51 Az status=0009 Ze status=0008 11:56:09 Check angles 11:56:09 SkyScan query 11:56:10 SkyScan query done: ret=0 az=99.6<-6640 ze=66.51<-7566 Statuses=0009 0008 11:56:10 Msec=1500 True Az=99.6 Ze=66.51 Az status=0009 Ze status=0008 11:56:10 Check angles 11:56:10 SkyScan query 11:56:11 SkyScan query done: ret=0 az=117.105<-7807 ze=66.51<-7566 Statuses=0009 0008 11:56:11 Msec=2250 True Az=117.105 Ze=66.51 Az status=0009 Ze status=0008 11:56:11 Check angles 11:56:11 SkyScan query 11:56:11 SkyScan query done: ret=0 az=134.535<-8969 ze=66.51<-7566 Statuses=0009 0008 11:56:11 Msec=3000 True Az=134.535 Ze=66.51 Az status=0009 Ze status=0008 11:56:12 Check angles 11:56:12 SkyScan query 11:56:12 SkyScan query done: ret=0 az=152.04<-10136 ze=66.51<-7566 Statuses=0009 0008 11:56:12 Msec=3750 True Az=152.04 Ze=66.51 Az status=0009 Ze status=0008 11:56:12 Check angles 11:56:12 SkyScan query 11:56:13 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 11:56:13 Msec=4500 True Az=157.995 Ze=66.51 Az status=0008 Ze status=0008 11:56:13 Message to Master queued w/err=0: serial=63970 error=0 11:56:18 Received message from Master: op=Filter serial=63971 11:56:18 Color wheel filter change from 0 to 0 11:56:18 FLIGetFilterPos err=0 currentPosition=0 11:56:18 FLIGetStepsRemaining err=0 RemainingSteps=0 11:56:18 Filter is already there-color wheel unchanged 11:56:18 Received message from Master: op=Shutter serial=63972 11:56:18 Shutter LASER close 11:56:18 Received message from Camera: op=State serial=63974 11:56:18 GetSingleValue result=40 Value=cccccccc 11:56:18 SkyScan query 11:56:19 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 11:56:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:19 Parameters OK 11:56:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:19 Set A/D data flow result=40 11:56:19 Set A/D channel type result=40 11:56:19 Set A/D encoding result=40 11:56:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:19 Set channel filter=0.000000e+000 result=40 11:56:19 Config A/D Result=40 11:56:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:19 Get A/D filter: -9.255963e+061 result=40 11:56:19 Get A/D value=-858993460 result=40 11:56:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:19 Parameters OK 11:56:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:19 Set A/D data flow result=40 11:56:19 Set A/D channel type result=40 11:56:19 Set A/D encoding result=40 11:56:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:19 Set channel filter=0.000000e+000 result=40 11:56:19 Config A/D Result=40 11:56:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:19 Get A/D filter: -9.255963e+061 result=40 11:56:19 Get A/D value=-858993460 result=40 11:56:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:19 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:56:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:56:19 Aux= 11:56:19 Message to Camera, serial 63974 queued 11:56:56 Received message from Master: op=PointingHead serial=63987 11:56:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:56:56 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:56:56 Point started: ret=0 11:56:56 point_skyscan result=0 11:56:57 Check angles 11:56:57 SkyScan query 11:56:57 SkyScan query done: ret=0 az=134.595<-8973 ze=36.465<-9569 Statuses=0009 0009 11:56:57 Msec=0 True Az=134.595 Ze=36.465 Az status=0009 Ze status=0009 11:56:57 Check angles 11:56:57 SkyScan query 11:56:58 SkyScan query done: ret=0 az=117.24<-7816 ze=15.525<-10965 Statuses=0009 0009 11:56:58 Msec=750 True Az=117.24 Ze=15.525 Az status=0009 Ze status=0009 11:56:58 Check angles 11:56:58 SkyScan query 11:56:59 SkyScan query done: ret=0 az=99.855<-6657 ze=-5.445<-12363 Statuses=0009 0009 11:56:59 Msec=1500 True Az=99.855 Ze=-5.445 Az status=0009 Ze status=0009 11:56:59 Check angles 11:56:59 SkyScan query 11:57:00 SkyScan query done: ret=0 az=82.275<-5485 ze=-26.4<-13760 Statuses=0009 0009 11:57:00 Msec=2250 True Az=82.275 Ze=-26.4 Az status=0009 Ze status=0009 11:57:00 Check angles 11:57:00 SkyScan query 11:57:00 SkyScan query done: ret=0 az=64.83<-4322 ze=-38.58<-14572 Statuses=0009 0008 11:57:00 Msec=3000 True Az=64.83 Ze=-38.58 Az status=0009 Ze status=0008 11:57:00 Check angles 11:57:00 SkyScan query 11:57:01 SkyScan query done: ret=0 az=47.415<-3161 ze=-38.535<-14569 Statuses=0009 0008 11:57:01 Msec=3750 True Az=47.415 Ze=-38.535 Az status=0009 Ze status=0008 11:57:01 Check angles 11:57:01 SkyScan query 11:57:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:57:02 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:57:02 Message to Master queued w/err=0: serial=63987 error=0 11:57:07 Received message from Master: op=Filter serial=63988 11:57:07 Color wheel filter change from 0 to 0 11:57:07 FLIGetFilterPos err=0 currentPosition=0 11:57:07 FLIGetStepsRemaining err=0 RemainingSteps=0 11:57:07 Filter is already there-color wheel unchanged 11:57:07 Received message from Master: op=Shutter serial=63989 11:57:07 Shutter LASER close 11:57:07 Received message from Camera: op=State serial=63991 11:57:07 GetSingleValue result=40 Value=cccccccc 11:57:07 SkyScan query 11:57:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:57:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:08 Parameters OK 11:57:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:08 Set A/D data flow result=40 11:57:08 Set A/D channel type result=40 11:57:08 Set A/D encoding result=40 11:57:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:08 Set channel filter=0.000000e+000 result=40 11:57:08 Config A/D Result=40 11:57:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:08 Get A/D filter: -9.255963e+061 result=40 11:57:08 Get A/D value=-858993460 result=40 11:57:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:08 Parameters OK 11:57:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:08 Set A/D data flow result=40 11:57:08 Set A/D channel type result=40 11:57:08 Set A/D encoding result=40 11:57:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:08 Set channel filter=0.000000e+000 result=40 11:57:08 Config A/D Result=40 11:57:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:08 Get A/D filter: -9.255963e+061 result=40 11:57:08 Get A/D value=-858993460 result=40 11:57:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:57:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:57:08 Aux= 11:57:08 Message to Camera, serial 63991 queued 11:57:44 Received message from Master: op=PointingHead serial=64004 11:57:44 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:57:44 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:57:45 Point started: ret=0 11:57:45 point_skyscan result=0 11:57:46 Check angles 11:57:46 SkyScan query 11:57:46 SkyScan query done: ret=0 az=63.885<-4259 ze=-68.115<-16541 Statuses=0009 0009 11:57:46 Msec=0 True Az=63.885 Ze=-68.115 Az status=0009 Ze status=0009 11:57:46 Check angles 11:57:46 SkyScan query 11:57:47 SkyScan query done: ret=0 az=81.3<-5420 ze=-89.115<-17941 Statuses=0009 0009 11:57:47 Msec=750 True Az=81.3 Ze=-89.115 Az status=0009 Ze status=0009 11:57:47 Check angles 11:57:47 SkyScan query 11:57:48 SkyScan query done: ret=0 az=98.835<-6589 ze=-110.055<-19337 Statuses=0009 0009 11:57:48 Msec=1500 True Az=98.835 Ze=-110.055 Az status=0009 Ze status=0009 11:57:48 Check angles 11:57:48 SkyScan query 11:57:48 SkyScan query done: ret=0 az=116.28<-7752 ze=-131.04<-20736 Statuses=0009 0009 11:57:48 Msec=2250 True Az=116.28 Ze=-131.04 Az status=0009 Ze status=0009 11:57:49 Check angles 11:57:49 SkyScan query 11:57:49 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 11:57:49 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 11:57:49 Check angles 11:57:49 SkyScan query 11:57:50 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:57:50 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:57:50 Message to Master queued w/err=0: serial=64004 error=0 11:57:55 Received message from Master: op=Filter serial=64005 11:57:55 Color wheel filter change from 0 to 0 11:57:55 FLIGetFilterPos err=0 currentPosition=0 11:57:55 FLIGetStepsRemaining err=0 RemainingSteps=0 11:57:55 Filter is already there-color wheel unchanged 11:57:55 Received message from Master: op=Shutter serial=64006 11:57:55 Shutter LASER close 11:57:55 Received message from Camera: op=State serial=64008 11:57:55 GetSingleValue result=40 Value=cccccccc 11:57:55 SkyScan query 11:57:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:57:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:56 Parameters OK 11:57:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:56 Set A/D data flow result=40 11:57:56 Set A/D channel type result=40 11:57:56 Set A/D encoding result=40 11:57:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:56 Set channel filter=0.000000e+000 result=40 11:57:56 Config A/D Result=40 11:57:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:56 Get A/D filter: -9.255963e+061 result=40 11:57:56 Get A/D value=-858993460 result=40 11:57:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:56 Parameters OK 11:57:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:56 Set A/D data flow result=40 11:57:56 Set A/D channel type result=40 11:57:56 Set A/D encoding result=40 11:57:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:56 Set channel filter=0.000000e+000 result=40 11:57:56 Config A/D Result=40 11:57:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:56 Get A/D filter: -9.255963e+061 result=40 11:57:56 Get A/D value=-858993460 result=40 11:57:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:56 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:57:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:57:56 Aux= 11:57:56 Message to Camera, serial 64008 queued 11:58:32 Received message from Master: op=PointingHead serial=64020 11:58:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:58:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:58:32 Point started: ret=0 11:58:32 point_skyscan result=0 11:58:33 Check angles 11:58:33 SkyScan query 11:58:33 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 11:58:33 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 11:58:33 Check angles 11:58:33 SkyScan query 11:58:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:58:34 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:58:34 Message to Master queued w/err=0: serial=64020 error=0 11:58:39 Received message from Master: op=Filter serial=64021 11:58:39 Color wheel filter change from 0 to 0 11:58:39 FLIGetFilterPos err=0 currentPosition=0 11:58:39 FLIGetStepsRemaining err=0 RemainingSteps=0 11:58:39 Filter is already there-color wheel unchanged 11:58:39 Received message from Master: op=Shutter serial=64022 11:58:39 Shutter LASER open 11:58:39 Received message from Camera: op=State serial=64024 11:58:39 GetSingleValue result=40 Value=cccccccc 11:58:39 SkyScan query 11:58:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:58:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:40 Parameters OK 11:58:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:40 Set A/D data flow result=40 11:58:40 Set A/D channel type result=40 11:58:40 Set A/D encoding result=40 11:58:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:40 Set channel filter=0.000000e+000 result=40 11:58:40 Config A/D Result=40 11:58:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:40 Get A/D filter: -9.255963e+061 result=40 11:58:40 Get A/D value=-858993460 result=40 11:58:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:40 Parameters OK 11:58:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:40 Set A/D data flow result=40 11:58:40 Set A/D channel type result=40 11:58:40 Set A/D encoding result=40 11:58:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:40 Set channel filter=0.000000e+000 result=40 11:58:40 Config A/D Result=40 11:58:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:40 Get A/D filter: -9.255963e+061 result=40 11:58:40 Get A/D value=-858993460 result=40 11:58:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:58:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:58:40 Aux= 11:58:40 Message to Camera, serial 64024 queued 11:58:48 Received message from Master: op=Shutter serial=64034 11:58:48 Shutter LASER close 11:58:49 Received message from Master: op=PointingHead serial=64038 11:58:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:58:49 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:58:49 Point started: ret=0 11:58:49 point_skyscan result=0 11:58:50 Check angles 11:58:50 SkyScan query 11:58:51 SkyScan query done: ret=0 az=135.87<-9058 ze=-143.4<-21560 Statuses=0009 0009 11:58:51 Msec=0 True Az=135.87 Ze=-143.4 Az status=0009 Ze status=0009 11:58:51 Check angles 11:58:51 SkyScan query 11:58:51 SkyScan query done: ret=0 az=153.69<-10246 ze=-121.98<-20132 Statuses=0009 0009 11:58:51 Msec=750 True Az=153.69 Ze=-121.98 Az status=0009 Ze status=0009 11:58:52 Check angles 11:58:52 SkyScan query 11:58:52 SkyScan query done: ret=0 az=171.54<-11436 ze=-100.53<-18702 Statuses=0009 0009 11:58:52 Msec=1500 True Az=171.54 Ze=-100.53 Az status=0009 Ze status=0009 11:58:52 Check angles 11:58:52 SkyScan query 11:58:53 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.635<-17309 Statuses=0008 0009 11:58:53 Msec=2250 True Az=176.025 Ze=-79.635 Az status=0008 Ze status=0009 11:58:53 Check angles 11:58:53 SkyScan query 11:58:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.65<-15910 Statuses=0008 0009 11:58:54 Msec=3000 True Az=176.01 Ze=-58.65 Az status=0008 Ze status=0009 11:58:54 Check angles 11:58:54 SkyScan query 11:58:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:58:54 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:58:54 Message to Master queued w/err=0: serial=64038 error=0 11:58:59 Received message from Master: op=Filter serial=64039 11:58:59 Color wheel filter change from 0 to 0 11:58:59 FLIGetFilterPos err=0 currentPosition=0 11:58:59 FLIGetStepsRemaining err=0 RemainingSteps=0 11:58:59 Filter is already there-color wheel unchanged 11:59:00 Received message from Master: op=Shutter serial=64040 11:59:00 Shutter LASER close 11:59:00 Received message from Camera: op=State serial=64042 11:59:00 GetSingleValue result=40 Value=cccccccc 11:59:00 SkyScan query 11:59:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:59:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:00 Parameters OK 11:59:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:00 Set A/D data flow result=40 11:59:00 Set A/D channel type result=40 11:59:00 Set A/D encoding result=40 11:59:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:00 Set channel filter=0.000000e+000 result=40 11:59:00 Config A/D Result=40 11:59:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:00 Get A/D filter: -9.255963e+061 result=40 11:59:00 Get A/D value=-858993460 result=40 11:59:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:00 Parameters OK 11:59:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:00 Set A/D data flow result=40 11:59:00 Set A/D channel type result=40 11:59:00 Set A/D encoding result=40 11:59:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:00 Set channel filter=0.000000e+000 result=40 11:59:00 Config A/D Result=40 11:59:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:00 Get A/D filter: -9.255963e+061 result=40 11:59:00 Get A/D value=-858993460 result=40 11:59:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:59:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:59:00 Aux= 11:59:00 Message to Camera, serial 64042 queued 11:59:37 Received message from Master: op=PointingHead serial=64055 11:59:37 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:59:37 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:59:38 Point started: ret=0 11:59:38 point_skyscan result=0 11:59:38 Check angles 11:59:38 SkyScan query 11:59:39 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.315<-13421 Statuses=0009 0009 11:59:39 Msec=0 True Az=152.715 Ze=-21.315 Az status=0009 Ze status=0009 11:59:39 Check angles 11:59:39 SkyScan query 11:59:40 SkyScan query done: ret=0 az=135.195<-9013 ze=-0.33<-12022 Statuses=0009 0009 11:59:40 Msec=750 True Az=135.195 Ze=-0.33 Az status=0009 Ze status=0009 11:59:40 Check angles 11:59:40 SkyScan query 11:59:40 SkyScan query done: ret=0 az=117.54<-7836 ze=20.655<-10623 Statuses=0009 0009 11:59:40 Msec=1500 True Az=117.54 Ze=20.655 Az status=0009 Ze status=0009 11:59:41 Check angles 11:59:41 SkyScan query 11:59:41 SkyScan query done: ret=0 az=100.155<-6677 ze=41.55<-9230 Statuses=0009 0009 11:59:41 Msec=2250 True Az=100.155 Ze=41.55 Az status=0009 Ze status=0009 11:59:41 Check angles 11:59:41 SkyScan query 11:59:42 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 11:59:42 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 11:59:42 Check angles 11:59:42 SkyScan query 11:59:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:59:43 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:59:43 Message to Master queued w/err=0: serial=64055 error=0 11:59:48 Received message from Master: op=Filter serial=64056 11:59:48 Color wheel filter change from 0 to 0 11:59:48 FLIGetFilterPos err=0 currentPosition=0 11:59:48 FLIGetStepsRemaining err=0 RemainingSteps=0 11:59:48 Filter is already there-color wheel unchanged 11:59:48 Received message from Master: op=Shutter serial=64057 11:59:48 Shutter LASER close 11:59:48 Received message from Camera: op=State serial=64059 11:59:48 GetSingleValue result=40 Value=cccccccc 11:59:48 SkyScan query 11:59:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:59:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:48 Parameters OK 11:59:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:48 Set A/D data flow result=40 11:59:48 Set A/D channel type result=40 11:59:48 Set A/D encoding result=40 11:59:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:48 Set channel filter=0.000000e+000 result=40 11:59:48 Config A/D Result=40 11:59:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:48 Get A/D filter: -9.255963e+061 result=40 11:59:48 Get A/D value=-858993460 result=40 11:59:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:48 Parameters OK 11:59:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:48 Set A/D data flow result=40 11:59:48 Set A/D channel type result=40 11:59:48 Set A/D encoding result=40 11:59:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:48 Set channel filter=0.000000e+000 result=40 11:59:48 Config A/D Result=40 11:59:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:48 Get A/D filter: -9.255963e+061 result=40 11:59:48 Get A/D value=-858993460 result=40 11:59:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:59:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:59:48 Aux= 11:59:48 Message to Camera, serial 64059 queued 12:00:25 Received message from Master: op=PointingHead serial=64072 12:00:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:00:25 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:00:26 Point started: ret=0 12:00:26 point_skyscan result=0 12:00:26 Check angles 12:00:26 SkyScan query 12:00:27 SkyScan query done: ret=0 az=108.84<-7256 ze=38.49<-9434 Statuses=0009 0008 12:00:27 Msec=0 True Az=108.84 Ze=38.49 Az status=0009 Ze status=0008 12:00:27 Check angles 12:00:27 SkyScan query 12:00:28 SkyScan query done: ret=0 az=126.48<-8432 ze=38.505<-9433 Statuses=0009 0008 12:00:28 Msec=750 True Az=126.48 Ze=38.505 Az status=0009 Ze status=0008 12:00:28 Check angles 12:00:28 SkyScan query 12:00:28 SkyScan query done: ret=0 az=143.835<-9589 ze=38.505<-9433 Statuses=0009 0008 12:00:28 Msec=1500 True Az=143.835 Ze=38.505 Az status=0009 Ze status=0008 12:00:29 Check angles 12:00:29 SkyScan query 12:00:29 SkyScan query done: ret=0 az=161.535<-10769 ze=38.505<-9433 Statuses=0009 0008 12:00:29 Msec=2250 True Az=161.535 Ze=38.505 Az status=0009 Ze status=0008 12:00:29 Check angles 12:00:29 SkyScan query 12:00:30 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:00:30 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:00:30 Check angles 12:00:30 SkyScan query 12:00:31 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:00:31 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:00:31 Message to Master queued w/err=0: serial=64072 error=0 12:00:36 Received message from Master: op=Filter serial=64073 12:00:36 Color wheel filter change from 0 to 0 12:00:36 FLIGetFilterPos err=0 currentPosition=0 12:00:36 FLIGetStepsRemaining err=0 RemainingSteps=0 12:00:36 Filter is already there-color wheel unchanged 12:00:36 Received message from Master: op=Shutter serial=64074 12:00:36 Shutter LASER close 12:00:36 Received message from Camera: op=State serial=64076 12:00:36 GetSingleValue result=40 Value=cccccccc 12:00:36 SkyScan query 12:00:37 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:00:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:37 Parameters OK 12:00:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:37 Set A/D data flow result=40 12:00:37 Set A/D channel type result=40 12:00:37 Set A/D encoding result=40 12:00:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:37 Set channel filter=0.000000e+000 result=40 12:00:37 Config A/D Result=40 12:00:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:37 Get A/D filter: -9.255963e+061 result=40 12:00:37 Get A/D value=-858993460 result=40 12:00:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:37 Parameters OK 12:00:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:37 Set A/D data flow result=40 12:00:37 Set A/D channel type result=40 12:00:37 Set A/D encoding result=40 12:00:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:37 Set channel filter=0.000000e+000 result=40 12:00:37 Config A/D Result=40 12:00:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:37 Get A/D filter: -9.255963e+061 result=40 12:00:37 Get A/D value=-858993460 result=40 12:00:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:00:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:00:37 Aux= 12:00:37 Message to Camera, serial 64076 queued 12:01:13 Received message from Master: op=PointingHead serial=64089 12:01:13 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:01:13 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:01:14 Point started: ret=0 12:01:14 point_skyscan result=0 12:01:14 Check angles 12:01:14 SkyScan query 12:01:15 SkyScan query done: ret=0 az=152.985<-10199 ze=8.7<-11420 Statuses=0009 0009 12:01:15 Msec=0 True Az=152.985 Ze=8.7 Az status=0009 Ze status=0009 12:01:15 Check angles 12:01:15 SkyScan query 12:01:16 SkyScan query done: ret=0 az=135.465<-9031 ze=-12.27<-12818 Statuses=0009 0009 12:01:16 Msec=750 True Az=135.465 Ze=-12.27 Az status=0009 Ze status=0009 12:01:16 Check angles 12:01:16 SkyScan query 12:01:17 SkyScan query done: ret=0 az=117.93<-7862 ze=-33.195<-14213 Statuses=0009 0009 12:01:17 Msec=1500 True Az=117.93 Ze=-33.195 Az status=0009 Ze status=0009 12:01:17 Check angles 12:01:17 SkyScan query 12:01:17 SkyScan query done: ret=0 az=100.2<-6680 ze=-51.57<-15438 Statuses=0009 0009 12:01:17 Msec=2250 True Az=100.2 Ze=-51.57 Az status=0009 Ze status=0009 12:01:18 Check angles 12:01:18 SkyScan query 12:01:18 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 12:01:18 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 12:01:18 Check angles 12:01:18 SkyScan query 12:01:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:01:19 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:01:19 Message to Master queued w/err=0: serial=64089 error=0 12:01:24 Received message from Master: op=Filter serial=64090 12:01:24 Color wheel filter change from 0 to 0 12:01:24 FLIGetFilterPos err=0 currentPosition=0 12:01:24 FLIGetStepsRemaining err=0 RemainingSteps=0 12:01:24 Filter is already there-color wheel unchanged 12:01:24 Received message from Master: op=Shutter serial=64091 12:01:24 Shutter LASER close 12:01:24 Received message from Camera: op=State serial=64093 12:01:24 GetSingleValue result=40 Value=cccccccc 12:01:24 SkyScan query 12:01:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:01:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:25 Parameters OK 12:01:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:25 Set A/D data flow result=40 12:01:25 Set A/D channel type result=40 12:01:25 Set A/D encoding result=40 12:01:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:25 Set channel filter=0.000000e+000 result=40 12:01:25 Config A/D Result=40 12:01:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:25 Get A/D filter: -9.255963e+061 result=40 12:01:25 Get A/D value=-858993460 result=40 12:01:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:25 Parameters OK 12:01:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:25 Set A/D data flow result=40 12:01:25 Set A/D channel type result=40 12:01:25 Set A/D encoding result=40 12:01:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:25 Set channel filter=0.000000e+000 result=40 12:01:25 Config A/D Result=40 12:01:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:25 Get A/D filter: -9.255963e+061 result=40 12:01:25 Get A/D value=-858993460 result=40 12:01:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:01:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:01:25 Aux= 12:01:25 Message to Camera, serial 64093 queued 12:02:01 Received message from Master: op=PointingHead serial=64106 12:02:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:02:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:02:02 Point started: ret=0 12:02:02 point_skyscan result=0 12:02:03 Check angles 12:02:03 SkyScan query 12:02:03 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.375<-17425 Statuses=0009 0009 12:02:03 Msec=0 True Az=109.17 Ze=-81.375 Az status=0009 Ze status=0009 12:02:03 Check angles 12:02:03 SkyScan query 12:02:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.78<-18852 Statuses=0008 0009 12:02:04 Msec=750 True Az=112.995 Ze=-102.78 Az status=0008 Ze status=0009 12:02:04 Check angles 12:02:04 SkyScan query 12:02:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.17<-20278 Statuses=0008 0009 12:02:05 Msec=1500 True Az=112.995 Ze=-124.17 Az status=0008 Ze status=0009 12:02:05 Check angles 12:02:05 SkyScan query 12:02:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.095<-21673 Statuses=0008 0009 12:02:05 Msec=2250 True Az=112.995 Ze=-145.095 Az status=0008 Ze status=0009 12:02:06 Check angles 12:02:06 SkyScan query 12:02:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.05<-23070 Statuses=0008 0009 12:02:06 Msec=3000 True Az=112.995 Ze=-166.05 Az status=0008 Ze status=0009 12:02:06 Check angles 12:02:06 SkyScan query 12:02:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:02:07 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:02:07 Message to Master queued w/err=0: serial=64106 error=0 12:02:12 Received message from Master: op=Filter serial=64107 12:02:12 Color wheel filter change from 0 to 0 12:02:12 FLIGetFilterPos err=0 currentPosition=0 12:02:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:02:12 Filter is already there-color wheel unchanged 12:02:12 Received message from Master: op=Shutter serial=64108 12:02:12 Shutter LASER open 12:02:12 Received message from Camera: op=State serial=64110 12:02:12 GetSingleValue result=40 Value=cccccccc 12:02:12 SkyScan query 12:02:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:02:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:13 Parameters OK 12:02:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:13 Set A/D data flow result=40 12:02:13 Set A/D channel type result=40 12:02:13 Set A/D encoding result=40 12:02:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:13 Set channel filter=0.000000e+000 result=40 12:02:13 Config A/D Result=40 12:02:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:13 Get A/D filter: -9.255963e+061 result=40 12:02:13 Get A/D value=-858993460 result=40 12:02:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:13 Parameters OK 12:02:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:13 Set A/D data flow result=40 12:02:13 Set A/D channel type result=40 12:02:13 Set A/D encoding result=40 12:02:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:13 Set channel filter=0.000000e+000 result=40 12:02:13 Config A/D Result=40 12:02:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:13 Get A/D filter: -9.255963e+061 result=40 12:02:13 Get A/D value=-858993460 result=40 12:02:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:02:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:02:13 Aux= 12:02:13 Message to Camera, serial 64110 queued 12:02:20 Received message from Master: op=Shutter serial=64119 12:02:20 Shutter LASER close 12:02:21 Received message from Master: op=PointingHead serial=64123 12:02:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:02:21 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:02:21 Point started: ret=0 12:02:21 point_skyscan result=0 12:02:22 Check angles 12:02:22 SkyScan query 12:02:22 SkyScan query done: ret=0 az=89.895<-5993 ze=157.335<-1511 Statuses=0009 0009 12:02:22 Msec=0 True Az=89.895 Ze=157.335 Az status=0009 Ze status=0009 12:02:23 Check angles 12:02:23 SkyScan query 12:02:23 SkyScan query done: ret=0 az=72.45<-4830 ze=136.35<-2910 Statuses=0009 0009 12:02:23 Msec=750 True Az=72.45 Ze=136.35 Az status=0009 Ze status=0009 12:02:23 Check angles 12:02:23 SkyScan query 12:02:24 SkyScan query done: ret=0 az=54.825<-3655 ze=114.99<-4334 Statuses=0009 0009 12:02:24 Msec=1500 True Az=54.825 Ze=114.99 Az status=0009 Ze status=0009 12:02:24 Check angles 12:02:24 SkyScan query 12:02:25 SkyScan query done: ret=0 az=40.935<-2729 ze=93.6<-5760 Statuses=0009 0009 12:02:25 Msec=2250 True Az=40.935 Ze=93.6 Az status=0009 Ze status=0009 12:02:25 Check angles 12:02:25 SkyScan query 12:02:25 SkyScan query done: ret=0 az=40.995<-2733 ze=72.615<-7159 Statuses=0008 0009 12:02:25 Msec=3000 True Az=40.995 Ze=72.615 Az status=0008 Ze status=0009 12:02:26 Check angles 12:02:26 SkyScan query 12:02:26 SkyScan query done: ret=0 az=40.995<-2733 ze=52.14<-8524 Statuses=0008 0009 12:02:26 Msec=3750 True Az=40.995 Ze=52.14 Az status=0008 Ze status=0009 12:02:26 Check angles 12:02:26 SkyScan query 12:02:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:02:27 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:02:27 Message to Master queued w/err=0: serial=64123 error=0 12:02:32 Received message from Master: op=Filter serial=64124 12:02:32 Color wheel filter change from 0 to 0 12:02:32 FLIGetFilterPos err=0 currentPosition=0 12:02:32 FLIGetStepsRemaining err=0 RemainingSteps=0 12:02:32 Filter is already there-color wheel unchanged 12:02:32 Received message from Master: op=Shutter serial=64125 12:02:32 Shutter LASER close 12:02:32 Received message from Camera: op=State serial=64127 12:02:32 GetSingleValue result=40 Value=cccccccc 12:02:32 SkyScan query 12:02:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:02:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:33 Parameters OK 12:02:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:33 Set A/D data flow result=40 12:02:33 Set A/D channel type result=40 12:02:33 Set A/D encoding result=40 12:02:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:33 Set channel filter=0.000000e+000 result=40 12:02:33 Config A/D Result=40 12:02:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:33 Get A/D filter: -9.255963e+061 result=40 12:02:33 Get A/D value=-858993460 result=40 12:02:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:33 Parameters OK 12:02:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:33 Set A/D data flow result=40 12:02:33 Set A/D channel type result=40 12:02:33 Set A/D encoding result=40 12:02:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:33 Set channel filter=0.000000e+000 result=40 12:02:33 Config A/D Result=40 12:02:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:33 Get A/D filter: -9.255963e+061 result=40 12:02:33 Get A/D value=-858993460 result=40 12:02:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:02:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:02:33 Aux= 12:02:33 Message to Camera, serial 64127 queued 12:03:10 Received message from Master: op=PointingHead serial=64140 12:03:10 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:03:10 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:03:10 Point started: ret=0 12:03:10 point_skyscan result=0 12:03:11 Check angles 12:03:11 SkyScan query 12:03:12 SkyScan query done: ret=0 az=64.035<-4269 ze=66.555<-7563 Statuses=0009 0008 12:03:12 Msec=0 True Az=64.035 Ze=66.555 Az status=0009 Ze status=0008 12:03:12 Check angles 12:03:12 SkyScan query 12:03:12 SkyScan query done: ret=0 az=81.3<-5420 ze=66.495<-7567 Statuses=0009 0008 12:03:12 Msec=750 True Az=81.3 Ze=66.495 Az status=0009 Ze status=0008 12:03:12 Check angles 12:03:12 SkyScan query 12:03:13 SkyScan query done: ret=0 az=99.39<-6626 ze=66.495<-7567 Statuses=0009 0008 12:03:13 Msec=1500 True Az=99.39 Ze=66.495 Az status=0009 Ze status=0008 12:03:13 Check angles 12:03:13 SkyScan query 12:03:14 SkyScan query done: ret=0 az=116.91<-7794 ze=66.495<-7567 Statuses=0009 0008 12:03:14 Msec=2250 True Az=116.91 Ze=66.495 Az status=0009 Ze status=0008 12:03:14 Check angles 12:03:14 SkyScan query 12:03:15 SkyScan query done: ret=0 az=134.295<-8953 ze=66.495<-7567 Statuses=0009 0008 12:03:15 Msec=3000 True Az=134.295 Ze=66.495 Az status=0009 Ze status=0008 12:03:15 Check angles 12:03:15 SkyScan query 12:03:15 SkyScan query done: ret=0 az=152.085<-10139 ze=66.495<-7567 Statuses=0009 0008 12:03:15 Msec=3750 True Az=152.085 Ze=66.495 Az status=0009 Ze status=0008 12:03:15 Check angles 12:03:15 SkyScan query 12:03:16 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 12:03:16 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 12:03:16 Message to Master queued w/err=0: serial=64140 error=0 12:03:21 Received message from Master: op=Filter serial=64141 12:03:21 Color wheel filter change from 0 to 0 12:03:21 FLIGetFilterPos err=0 currentPosition=0 12:03:21 FLIGetStepsRemaining err=0 RemainingSteps=0 12:03:21 Filter is already there-color wheel unchanged 12:03:21 Received message from Master: op=Shutter serial=64142 12:03:21 Shutter LASER close 12:03:21 Received message from Camera: op=State serial=64144 12:03:21 GetSingleValue result=40 Value=cccccccc 12:03:21 SkyScan query 12:03:22 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:03:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:22 Parameters OK 12:03:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:22 Set A/D data flow result=40 12:03:22 Set A/D channel type result=40 12:03:22 Set A/D encoding result=40 12:03:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:22 Set channel filter=0.000000e+000 result=40 12:03:22 Config A/D Result=40 12:03:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:22 Get A/D filter: -9.255963e+061 result=40 12:03:22 Get A/D value=-858993460 result=40 12:03:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:22 Parameters OK 12:03:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:22 Set A/D data flow result=40 12:03:22 Set A/D channel type result=40 12:03:22 Set A/D encoding result=40 12:03:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:22 Set channel filter=0.000000e+000 result=40 12:03:22 Config A/D Result=40 12:03:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:22 Get A/D filter: -9.255963e+061 result=40 12:03:22 Get A/D value=-858993460 result=40 12:03:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:22 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:03:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:03:22 Aux= 12:03:22 Message to Camera, serial 64144 queued 12:03:59 Received message from Master: op=PointingHead serial=64157 12:03:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:03:59 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:03:59 Point started: ret=0 12:03:59 point_skyscan result=0 12:04:00 Check angles 12:04:00 SkyScan query 12:04:00 SkyScan query done: ret=0 az=135.09<-9006 ze=36.825<-9545 Statuses=0009 0009 12:04:00 Msec=0 True Az=135.09 Ze=36.825 Az status=0009 Ze status=0009 12:04:01 Check angles 12:04:01 SkyScan query 12:04:01 SkyScan query done: ret=0 az=117.6<-7840 ze=15.855<-10943 Statuses=0009 0009 12:04:01 Msec=750 True Az=117.6 Ze=15.855 Az status=0009 Ze status=0009 12:04:01 Check angles 12:04:01 SkyScan query 12:04:02 SkyScan query done: ret=0 az=99.84<-6656 ze=-5.505<-12367 Statuses=0009 0009 12:04:02 Msec=1500 True Az=99.84 Ze=-5.505 Az status=0009 Ze status=0009 12:04:02 Check angles 12:04:02 SkyScan query 12:04:03 SkyScan query done: ret=0 az=82.335<-5489 ze=-26.43<-13762 Statuses=0009 0009 12:04:03 Msec=2250 True Az=82.335 Ze=-26.43 Az status=0009 Ze status=0009 12:04:03 Check angles 12:04:03 SkyScan query 12:04:03 SkyScan query done: ret=0 az=64.77<-4318 ze=-38.565<-14571 Statuses=0009 0008 12:04:03 Msec=3000 True Az=64.77 Ze=-38.565 Az status=0009 Ze status=0008 12:04:04 Check angles 12:04:04 SkyScan query 12:04:04 SkyScan query done: ret=0 az=47.085<-3139 ze=-38.535<-14569 Statuses=0009 0008 12:04:04 Msec=3750 True Az=47.085 Ze=-38.535 Az status=0009 Ze status=0008 12:04:04 Check angles 12:04:04 SkyScan query 12:04:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:04:05 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:04:05 Message to Master queued w/err=0: serial=64157 error=0 12:04:10 Received message from Master: op=Filter serial=64158 12:04:10 Color wheel filter change from 0 to 0 12:04:10 FLIGetFilterPos err=0 currentPosition=0 12:04:10 FLIGetStepsRemaining err=0 RemainingSteps=0 12:04:10 Filter is already there-color wheel unchanged 12:04:10 Received message from Master: op=Shutter serial=64159 12:04:10 Shutter LASER close 12:04:10 Received message from Camera: op=State serial=64161 12:04:10 GetSingleValue result=40 Value=cccccccc 12:04:10 SkyScan query 12:04:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:04:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:11 Parameters OK 12:04:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:11 Set A/D data flow result=40 12:04:11 Set A/D channel type result=40 12:04:11 Set A/D encoding result=40 12:04:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:11 Set channel filter=0.000000e+000 result=40 12:04:11 Config A/D Result=40 12:04:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:11 Get A/D filter: -9.255963e+061 result=40 12:04:11 Get A/D value=-858993460 result=40 12:04:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:11 Parameters OK 12:04:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:11 Set A/D data flow result=40 12:04:11 Set A/D channel type result=40 12:04:11 Set A/D encoding result=40 12:04:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:11 Set channel filter=0.000000e+000 result=40 12:04:11 Config A/D Result=40 12:04:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:11 Get A/D filter: -9.255963e+061 result=40 12:04:11 Get A/D value=-858993460 result=40 12:04:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:04:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:04:11 Aux= 12:04:11 Message to Camera, serial 64161 queued 12:04:47 Received message from Master: op=PointingHead serial=64174 12:04:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:04:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:04:48 Point started: ret=0 12:04:48 point_skyscan result=0 12:04:49 Check angles 12:04:49 SkyScan query 12:04:49 SkyScan query done: ret=0 az=63.855<-4257 ze=-68.07<-16538 Statuses=0009 0009 12:04:49 Msec=0 True Az=63.855 Ze=-68.07 Az status=0009 Ze status=0009 12:04:49 Check angles 12:04:49 SkyScan query 12:04:50 SkyScan query done: ret=0 az=81.255<-5417 ze=-89.07<-17938 Statuses=0009 0009 12:04:50 Msec=750 True Az=81.255 Ze=-89.07 Az status=0009 Ze status=0009 12:04:50 Check angles 12:04:50 SkyScan query 12:04:51 SkyScan query done: ret=0 az=98.79<-6586 ze=-109.995<-19333 Statuses=0009 0009 12:04:51 Msec=1500 True Az=98.79 Ze=-109.995 Az status=0009 Ze status=0009 12:04:51 Check angles 12:04:51 SkyScan query 12:04:51 SkyScan query done: ret=0 az=116.325<-7755 ze=-130.98<-20732 Statuses=0009 0009 12:04:51 Msec=2250 True Az=116.325 Ze=-130.98 Az status=0009 Ze status=0009 12:04:52 Check angles 12:04:52 SkyScan query 12:04:52 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 12:04:52 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 12:04:52 Check angles 12:04:52 SkyScan query 12:04:53 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:04:53 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:04:53 Message to Master queued w/err=0: serial=64174 error=0 12:04:58 Received message from Master: op=Filter serial=64175 12:04:58 Color wheel filter change from 0 to 0 12:04:58 FLIGetFilterPos err=0 currentPosition=0 12:04:58 FLIGetStepsRemaining err=0 RemainingSteps=0 12:04:58 Filter is already there-color wheel unchanged 12:04:58 Received message from Master: op=Shutter serial=64176 12:04:58 Shutter LASER close 12:04:58 Received message from Camera: op=State serial=64178 12:04:58 GetSingleValue result=40 Value=cccccccc 12:04:58 SkyScan query 12:04:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:04:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:59 Parameters OK 12:04:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:59 Set A/D data flow result=40 12:04:59 Set A/D channel type result=40 12:04:59 Set A/D encoding result=40 12:04:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:59 Set channel filter=0.000000e+000 result=40 12:04:59 Config A/D Result=40 12:04:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:59 Get A/D filter: -9.255963e+061 result=40 12:04:59 Get A/D value=-858993460 result=40 12:04:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:59 Parameters OK 12:04:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:59 Set A/D data flow result=40 12:04:59 Set A/D channel type result=40 12:04:59 Set A/D encoding result=40 12:04:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:59 Set channel filter=0.000000e+000 result=40 12:04:59 Config A/D Result=40 12:04:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:59 Get A/D filter: -9.255963e+061 result=40 12:04:59 Get A/D value=-858993460 result=40 12:04:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:59 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:04:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:04:59 Aux= 12:04:59 Message to Camera, serial 64178 queued 12:05:36 Received message from Master: op=PointingHead serial=64191 12:05:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:05:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:05:36 Point started: ret=0 12:05:36 point_skyscan result=0 12:05:37 Check angles 12:05:37 SkyScan query 12:05:37 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.285<-23419 Statuses=0009 0009 12:05:37 Msec=0 True Az=113.01 Ze=-171.285 Az status=0009 Ze status=0009 12:05:37 Check angles 12:05:37 SkyScan query 12:05:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:05:38 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:05:38 Message to Master queued w/err=0: serial=64191 error=0 12:05:43 Received message from Master: op=Filter serial=64192 12:05:43 Color wheel filter change from 0 to 0 12:05:43 FLIGetFilterPos err=0 currentPosition=0 12:05:43 FLIGetStepsRemaining err=0 RemainingSteps=0 12:05:43 Filter is already there-color wheel unchanged 12:05:43 Received message from Master: op=Shutter serial=64193 12:05:43 Shutter LASER open 12:05:43 Received message from Camera: op=State serial=64195 12:05:43 GetSingleValue result=40 Value=cccccccc 12:05:43 SkyScan query 12:05:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:05:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:44 Parameters OK 12:05:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:44 Set A/D data flow result=40 12:05:44 Set A/D channel type result=40 12:05:44 Set A/D encoding result=40 12:05:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:44 Set channel filter=0.000000e+000 result=40 12:05:44 Config A/D Result=40 12:05:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:44 Get A/D filter: -9.255963e+061 result=40 12:05:44 Get A/D value=-858993460 result=40 12:05:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:44 Parameters OK 12:05:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:44 Set A/D data flow result=40 12:05:44 Set A/D channel type result=40 12:05:44 Set A/D encoding result=40 12:05:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:44 Set channel filter=0.000000e+000 result=40 12:05:44 Config A/D Result=40 12:05:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:44 Get A/D filter: -9.255963e+061 result=40 12:05:44 Get A/D value=-858993460 result=40 12:05:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:05:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:05:44 Aux= 12:05:44 Message to Camera, serial 64195 queued 12:05:52 Received message from Master: op=Shutter serial=64205 12:05:52 Shutter LASER close 12:05:53 Received message from Master: op=PointingHead serial=64209 12:05:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:05:53 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:05:53 Point started: ret=0 12:05:53 point_skyscan result=0 12:05:54 Check angles 12:05:54 SkyScan query 12:05:55 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.175<-21545 Statuses=0009 0009 12:05:55 Msec=0 True Az=135.96 Ze=-143.175 Az status=0009 Ze status=0009 12:05:55 Check angles 12:05:55 SkyScan query [UTC 2018-12-11 12:05:55] 12:05:55 SkyScan query done: ret=0 az=153.885<-10259 ze=-121.68<-20112 Statuses=0009 0009 12:05:55 Msec=750 True Az=153.885 Ze=-121.68 Az status=0009 Ze status=0009 12:05:56 Check angles 12:05:56 SkyScan query 12:05:56 SkyScan query done: ret=0 az=171.735<-11449 ze=-100.305<-18687 Statuses=0009 0009 12:05:56 Msec=1500 True Az=171.735 Ze=-100.305 Az status=0009 Ze status=0009 12:05:56 Check angles 12:05:56 SkyScan query 12:05:57 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.395<-17293 Statuses=0008 0009 12:05:57 Msec=2250 True Az=176.025 Ze=-79.395 Az status=0008 Ze status=0009 12:05:57 Check angles 12:05:57 SkyScan query 12:05:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.425<-15895 Statuses=0008 0009 12:05:58 Msec=3000 True Az=176.01 Ze=-58.425 Az status=0008 Ze status=0009 12:05:58 Check angles 12:05:58 SkyScan query 12:05:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 12:05:58 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 12:05:58 Message to Master queued w/err=0: serial=64209 error=0 12:06:03 Received message from Master: op=Filter serial=64210 12:06:03 Color wheel filter change from 0 to 0 12:06:03 FLIGetFilterPos err=0 currentPosition=0 12:06:03 FLIGetStepsRemaining err=0 RemainingSteps=0 12:06:03 Filter is already there-color wheel unchanged 12:06:04 Received message from Master: op=Shutter serial=64211 12:06:04 Shutter LASER close 12:06:04 Received message from Camera: op=State serial=64213 12:06:04 GetSingleValue result=40 Value=cccccccc 12:06:04 SkyScan query 12:06:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:06:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:04 Parameters OK 12:06:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:04 Set A/D data flow result=40 12:06:04 Set A/D channel type result=40 12:06:04 Set A/D encoding result=40 12:06:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:04 Set channel filter=0.000000e+000 result=40 12:06:04 Config A/D Result=40 12:06:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:04 Get A/D filter: -9.255963e+061 result=40 12:06:04 Get A/D value=-858993460 result=40 12:06:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:04 Parameters OK 12:06:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:04 Set A/D data flow result=40 12:06:04 Set A/D channel type result=40 12:06:04 Set A/D encoding result=40 12:06:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:04 Set channel filter=0.000000e+000 result=40 12:06:04 Config A/D Result=40 12:06:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:04 Get A/D filter: -9.255963e+061 result=40 12:06:04 Get A/D value=-858993460 result=40 12:06:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:06:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:06:04 Aux= 12:06:04 Message to Camera, serial 64213 queued 12:06:41 Received message from Master: op=PointingHead serial=64226 12:06:41 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:06:41 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:06:41 Point started: ret=0 12:06:41 point_skyscan result=0 12:06:42 Check angles 12:06:42 SkyScan query 12:06:43 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.855<-13457 Statuses=0009 0009 12:06:43 Msec=0 True Az=152.985 Ze=-21.855 Az status=0009 Ze status=0009 12:06:43 Check angles 12:06:43 SkyScan query 12:06:44 SkyScan query done: ret=0 az=135.24<-9016 ze=-0.435<-12029 Statuses=0009 0009 12:06:44 Msec=750 True Az=135.24 Ze=-0.435 Az status=0009 Ze status=0009 12:06:44 Check angles 12:06:44 SkyScan query 12:06:44 SkyScan query done: ret=0 az=117.255<-7817 ze=20.97<-10602 Statuses=0009 0009 12:06:44 Msec=1500 True Az=117.255 Ze=20.97 Az status=0009 Ze status=0009 12:06:45 Check angles 12:06:45 SkyScan query 12:06:45 SkyScan query done: ret=0 az=99.96<-6664 ze=41.895<-9207 Statuses=0009 0009 12:06:45 Msec=2250 True Az=99.96 Ze=41.895 Az status=0009 Ze status=0009 12:06:45 Check angles 12:06:45 SkyScan query 12:06:46 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 12:06:46 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 12:06:46 Check angles 12:06:46 SkyScan query 12:06:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:06:47 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:06:47 Message to Master queued w/err=0: serial=64226 error=0 12:06:52 Received message from Master: op=Filter serial=64227 12:06:52 Color wheel filter change from 0 to 0 12:06:52 FLIGetFilterPos err=0 currentPosition=0 12:06:52 FLIGetStepsRemaining err=0 RemainingSteps=0 12:06:52 Filter is already there-color wheel unchanged 12:06:52 Received message from Master: op=Shutter serial=64228 12:06:52 Shutter LASER close 12:06:52 Received message from Camera: op=State serial=64230 12:06:52 GetSingleValue result=40 Value=cccccccc 12:06:52 SkyScan query 12:06:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:06:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:52 Parameters OK 12:06:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:52 Set A/D data flow result=40 12:06:52 Set A/D channel type result=40 12:06:52 Set A/D encoding result=40 12:06:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:52 Set channel filter=0.000000e+000 result=40 12:06:52 Config A/D Result=40 12:06:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:52 Get A/D filter: -9.255963e+061 result=40 12:06:52 Get A/D value=-858993460 result=40 12:06:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:52 Parameters OK 12:06:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:52 Set A/D data flow result=40 12:06:52 Set A/D channel type result=40 12:06:52 Set A/D encoding result=40 12:06:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:52 Set channel filter=0.000000e+000 result=40 12:06:52 Config A/D Result=40 12:06:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:52 Get A/D filter: -9.255963e+061 result=40 12:06:52 Get A/D value=-858993460 result=40 12:06:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:06:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:06:52 Aux= 12:06:52 Message to Camera, serial 64230 queued 12:07:29 Received message from Master: op=PointingHead serial=64243 12:07:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:07:29 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:07:30 Point started: ret=0 12:07:30 point_skyscan result=0 12:07:30 Check angles 12:07:30 SkyScan query 12:07:31 SkyScan query done: ret=0 az=108.735<-7249 ze=38.49<-9434 Statuses=0009 0008 12:07:31 Msec=0 True Az=108.735 Ze=38.49 Az status=0009 Ze status=0008 12:07:31 Check angles 12:07:31 SkyScan query 12:07:32 SkyScan query done: ret=0 az=126.285<-8419 ze=38.505<-9433 Statuses=0009 0008 12:07:32 Msec=750 True Az=126.285 Ze=38.505 Az status=0009 Ze status=0008 12:07:32 Check angles 12:07:32 SkyScan query 12:07:32 SkyScan query done: ret=0 az=144.09<-9606 ze=38.505<-9433 Statuses=0009 0008 12:07:32 Msec=1500 True Az=144.09 Ze=38.505 Az status=0009 Ze status=0008 12:07:33 Check angles 12:07:33 SkyScan query 12:07:33 SkyScan query done: ret=0 az=161.415<-10761 ze=38.505<-9433 Statuses=0009 0008 12:07:33 Msec=2250 True Az=161.415 Ze=38.505 Az status=0009 Ze status=0008 12:07:33 Check angles 12:07:33 SkyScan query 12:07:34 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 12:07:34 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 12:07:34 Check angles 12:07:34 SkyScan query 12:07:35 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:07:35 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:07:35 Message to Master queued w/err=0: serial=64243 error=0 12:07:40 Received message from Master: op=Filter serial=64244 12:07:40 Color wheel filter change from 0 to 0 12:07:40 FLIGetFilterPos err=0 currentPosition=0 12:07:40 FLIGetStepsRemaining err=0 RemainingSteps=0 12:07:40 Filter is already there-color wheel unchanged 12:07:40 Received message from Master: op=Shutter serial=64245 12:07:40 Shutter LASER close 12:07:40 Received message from Camera: op=State serial=64247 12:07:40 GetSingleValue result=40 Value=cccccccc 12:07:40 SkyScan query 12:07:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:07:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:41 Parameters OK 12:07:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:41 Set A/D data flow result=40 12:07:41 Set A/D channel type result=40 12:07:41 Set A/D encoding result=40 12:07:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:41 Set channel filter=0.000000e+000 result=40 12:07:41 Config A/D Result=40 12:07:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:41 Get A/D filter: -9.255963e+061 result=40 12:07:41 Get A/D value=-858993460 result=40 12:07:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:41 Parameters OK 12:07:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:41 Set A/D data flow result=40 12:07:41 Set A/D channel type result=40 12:07:41 Set A/D encoding result=40 12:07:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:41 Set channel filter=0.000000e+000 result=40 12:07:41 Config A/D Result=40 12:07:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:41 Get A/D filter: -9.255963e+061 result=40 12:07:41 Get A/D value=-858993460 result=40 12:07:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:07:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:07:41 Aux= 12:07:41 Message to Camera, serial 64247 queued 12:08:17 Received message from Master: op=PointingHead serial=64260 12:08:17 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:08:17 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:08:18 Point started: ret=0 12:08:18 point_skyscan result=0 12:08:18 Check angles 12:08:18 SkyScan query 12:08:19 SkyScan query done: ret=0 az=152.94<-10196 ze=8.595<-11427 Statuses=0009 0009 12:08:19 Msec=0 True Az=152.94 Ze=8.595 Az status=0009 Ze status=0009 12:08:19 Check angles 12:08:19 SkyScan query 12:08:20 SkyScan query done: ret=0 az=135.165<-9011 ze=-12.81<-12854 Statuses=0009 0009 12:08:20 Msec=750 True Az=135.165 Ze=-12.81 Az status=0009 Ze status=0009 12:08:20 Check angles 12:08:20 SkyScan query 12:08:21 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.765<-14251 Statuses=0009 0009 12:08:21 Msec=1500 True Az=117.54 Ze=-33.765 Az status=0009 Ze status=0009 12:08:21 Check angles 12:08:21 SkyScan query 12:08:21 SkyScan query done: ret=0 az=100.185<-6679 ze=-51.57<-15438 Statuses=0009 0009 12:08:21 Msec=2250 True Az=100.185 Ze=-51.57 Az status=0009 Ze status=0009 12:08:21 Check angles 12:08:21 SkyScan query 12:08:22 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 12:08:22 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 12:08:22 Check angles 12:08:22 SkyScan query 12:08:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:08:23 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:08:23 Message to Master queued w/err=0: serial=64260 error=0 12:08:28 Received message from Master: op=Filter serial=64261 12:08:28 Color wheel filter change from 0 to 0 12:08:28 FLIGetFilterPos err=0 currentPosition=0 12:08:28 FLIGetStepsRemaining err=0 RemainingSteps=0 12:08:28 Filter is already there-color wheel unchanged 12:08:28 Received message from Master: op=Shutter serial=64262 12:08:28 Shutter LASER close 12:08:28 Received message from Camera: op=State serial=64264 12:08:28 GetSingleValue result=40 Value=cccccccc 12:08:28 SkyScan query 12:08:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:08:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:29 Parameters OK 12:08:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:29 Set A/D data flow result=40 12:08:29 Set A/D channel type result=40 12:08:29 Set A/D encoding result=40 12:08:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:29 Set channel filter=0.000000e+000 result=40 12:08:29 Config A/D Result=40 12:08:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:29 Get A/D filter: -9.255963e+061 result=40 12:08:29 Get A/D value=-858993460 result=40 12:08:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:29 Parameters OK 12:08:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:29 Set A/D data flow result=40 12:08:29 Set A/D channel type result=40 12:08:29 Set A/D encoding result=40 12:08:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:29 Set channel filter=0.000000e+000 result=40 12:08:29 Config A/D Result=40 12:08:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:29 Get A/D filter: -9.255963e+061 result=40 12:08:29 Get A/D value=-858993460 result=40 12:08:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:08:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:08:29 Aux= 12:08:29 Message to Camera, serial 64264 queued 12:09:05 Received message from Master: op=PointingHead serial=64277 12:09:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:09:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:09:06 Point started: ret=0 12:09:06 point_skyscan result=0 12:09:07 Check angles 12:09:07 SkyScan query 12:09:07 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.15<-17410 Statuses=0009 0009 12:09:07 Msec=0 True Az=108.915 Ze=-81.15 Az status=0009 Ze status=0009 12:09:07 Check angles 12:09:07 SkyScan query 12:09:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.135<-18809 Statuses=0008 0009 12:09:08 Msec=750 True Az=112.995 Ze=-102.135 Az status=0008 Ze status=0009 12:09:08 Check angles 12:09:08 SkyScan query 12:09:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.06<-20204 Statuses=0008 0009 12:09:09 Msec=1500 True Az=112.995 Ze=-123.06 Az status=0008 Ze status=0009 12:09:09 Check angles 12:09:09 SkyScan query 12:09:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.03<-21602 Statuses=0008 0009 12:09:09 Msec=2250 True Az=112.995 Ze=-144.03 Az status=0008 Ze status=0009 12:09:10 Check angles 12:09:10 SkyScan query 12:09:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.97<-22998 Statuses=0008 0009 12:09:10 Msec=3000 True Az=112.995 Ze=-164.97 Az status=0008 Ze status=0009 12:09:10 Check angles 12:09:10 SkyScan query 12:09:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 12:09:11 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 12:09:11 Message to Master queued w/err=0: serial=64277 error=0 12:09:16 Received message from Master: op=Filter serial=64278 12:09:16 Color wheel filter change from 0 to 0 12:09:16 FLIGetFilterPos err=0 currentPosition=0 12:09:16 FLIGetStepsRemaining err=0 RemainingSteps=0 12:09:16 Filter is already there-color wheel unchanged 12:09:16 Received message from Master: op=Shutter serial=64279 12:09:16 Shutter LASER open 12:09:16 Received message from Camera: op=State serial=64281 12:09:16 GetSingleValue result=40 Value=cccccccc 12:09:16 SkyScan query 12:09:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:09:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:17 Parameters OK 12:09:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:17 Set A/D data flow result=40 12:09:17 Set A/D channel type result=40 12:09:17 Set A/D encoding result=40 12:09:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:17 Set channel filter=0.000000e+000 result=40 12:09:17 Config A/D Result=40 12:09:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:17 Get A/D filter: -9.255963e+061 result=40 12:09:17 Get A/D value=-858993460 result=40 12:09:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:17 Parameters OK 12:09:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:17 Set A/D data flow result=40 12:09:17 Set A/D channel type result=40 12:09:17 Set A/D encoding result=40 12:09:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:17 Set channel filter=0.000000e+000 result=40 12:09:17 Config A/D Result=40 12:09:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:17 Get A/D filter: -9.255963e+061 result=40 12:09:17 Get A/D value=-858993460 result=40 12:09:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:09:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:09:17 Aux= 12:09:17 Message to Camera, serial 64281 queued 12:09:25 Received message from Master: op=Shutter serial=64291 12:09:25 Shutter LASER close 12:09:26 Received message from Master: op=PointingHead serial=64295 12:09:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:09:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:09:26 Point started: ret=0 12:09:26 point_skyscan result=0 12:09:27 Check angles 12:09:27 SkyScan query 12:09:27 SkyScan query done: ret=0 az=89.835<-5989 ze=157.155<-1523 Statuses=0009 0009 12:09:27 Msec=0 True Az=89.835 Ze=157.155 Az status=0009 Ze status=0009 12:09:27 Check angles 12:09:27 SkyScan query 12:09:28 SkyScan query done: ret=0 az=71.85<-4790 ze=135.735<-2951 Statuses=0009 0009 12:09:28 Msec=750 True Az=71.85 Ze=135.735 Az status=0009 Ze status=0009 12:09:28 Check angles 12:09:28 SkyScan query 12:09:29 SkyScan query done: ret=0 az=54.675<-3645 ze=114.78<-4348 Statuses=0009 0009 12:09:29 Msec=1500 True Az=54.675 Ze=114.78 Az status=0009 Ze status=0009 12:09:29 Check angles 12:09:29 SkyScan query 12:09:30 SkyScan query done: ret=0 az=40.965<-2731 ze=93.435<-5771 Statuses=0009 0009 12:09:30 Msec=2250 True Az=40.965 Ze=93.435 Az status=0009 Ze status=0009 12:09:30 Check angles 12:09:30 SkyScan query 12:09:30 SkyScan query done: ret=0 az=40.995<-2733 ze=72.45<-7170 Statuses=0008 0009 12:09:30 Msec=3000 True Az=40.995 Ze=72.45 Az status=0008 Ze status=0009 12:09:31 Check angles 12:09:31 SkyScan query 12:09:31 SkyScan query done: ret=0 az=40.995<-2733 ze=52.26<-8516 Statuses=0008 0009 12:09:31 Msec=3750 True Az=40.995 Ze=52.26 Az status=0008 Ze status=0009 12:09:31 Check angles 12:09:31 SkyScan query 12:09:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:09:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:09:32 Message to Master queued w/err=0: serial=64295 error=0 12:09:37 Received message from Master: op=Filter serial=64296 12:09:37 Color wheel filter change from 0 to 0 12:09:37 FLIGetFilterPos err=0 currentPosition=0 12:09:37 FLIGetStepsRemaining err=0 RemainingSteps=0 12:09:37 Filter is already there-color wheel unchanged 12:09:37 Received message from Master: op=Shutter serial=64297 12:09:37 Shutter LASER close 12:09:37 Received message from Camera: op=State serial=64299 12:09:37 GetSingleValue result=40 Value=cccccccc 12:09:37 SkyScan query 12:09:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:09:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:38 Parameters OK 12:09:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:38 Set A/D data flow result=40 12:09:38 Set A/D channel type result=40 12:09:38 Set A/D encoding result=40 12:09:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:38 Set channel filter=0.000000e+000 result=40 12:09:38 Config A/D Result=40 12:09:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:38 Get A/D filter: -9.255963e+061 result=40 12:09:38 Get A/D value=-858993460 result=40 12:09:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:38 Parameters OK 12:09:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:38 Set A/D data flow result=40 12:09:38 Set A/D channel type result=40 12:09:38 Set A/D encoding result=40 12:09:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:38 Set channel filter=0.000000e+000 result=40 12:09:38 Config A/D Result=40 12:09:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:38 Get A/D filter: -9.255963e+061 result=40 12:09:38 Get A/D value=-858993460 result=40 12:09:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:09:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:09:38 Aux= 12:09:38 Message to Camera, serial 64299 queued 12:10:15 Received message from Master: op=PointingHead serial=64312 12:10:15 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:10:15 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:10:15 Point started: ret=0 12:10:15 point_skyscan result=0 12:10:16 Check angles 12:10:16 SkyScan query 12:10:16 SkyScan query done: ret=0 az=64.02<-4268 ze=66.555<-7563 Statuses=0009 0008 12:10:16 Msec=0 True Az=64.02 Ze=66.555 Az status=0009 Ze status=0008 12:10:16 Check angles 12:10:16 SkyScan query 12:10:17 SkyScan query done: ret=0 az=81.825<-5455 ze=66.495<-7567 Statuses=0009 0008 12:10:17 Msec=750 True Az=81.825 Ze=66.495 Az status=0009 Ze status=0008 12:10:17 Check angles 12:10:17 SkyScan query 12:10:18 SkyScan query done: ret=0 az=99.405<-6627 ze=66.495<-7567 Statuses=0009 0008 12:10:18 Msec=1500 True Az=99.405 Ze=66.495 Az status=0009 Ze status=0008 12:10:18 Check angles 12:10:18 SkyScan query 12:10:19 SkyScan query done: ret=0 az=116.925<-7795 ze=66.495<-7567 Statuses=0009 0008 12:10:19 Msec=2250 True Az=116.925 Ze=66.495 Az status=0009 Ze status=0008 12:10:19 Check angles 12:10:19 SkyScan query 12:10:19 SkyScan query done: ret=0 az=134.64<-8976 ze=66.495<-7567 Statuses=0009 0008 12:10:19 Msec=3000 True Az=134.64 Ze=66.495 Az status=0009 Ze status=0008 12:10:19 Check angles 12:10:19 SkyScan query 12:10:20 SkyScan query done: ret=0 az=152.16<-10144 ze=66.495<-7567 Statuses=0009 0008 12:10:20 Msec=3750 True Az=152.16 Ze=66.495 Az status=0009 Ze status=0008 12:10:20 Check angles 12:10:20 SkyScan query 12:10:21 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 12:10:21 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 12:10:21 Message to Master queued w/err=0: serial=64312 error=0 12:10:26 Received message from Master: op=Filter serial=64313 12:10:26 Color wheel filter change from 0 to 0 12:10:26 FLIGetFilterPos err=0 currentPosition=0 12:10:26 FLIGetStepsRemaining err=0 RemainingSteps=0 12:10:26 Filter is already there-color wheel unchanged 12:10:26 Received message from Master: op=Shutter serial=64314 12:10:26 Shutter LASER close 12:10:26 Received message from Camera: op=State serial=64316 12:10:26 GetSingleValue result=40 Value=cccccccc 12:10:26 SkyScan query 12:10:27 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:10:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:27 Parameters OK 12:10:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:27 Set A/D data flow result=40 12:10:27 Set A/D channel type result=40 12:10:27 Set A/D encoding result=40 12:10:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:27 Set channel filter=0.000000e+000 result=40 12:10:27 Config A/D Result=40 12:10:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:27 Get A/D filter: -9.255963e+061 result=40 12:10:27 Get A/D value=-858993460 result=40 12:10:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:27 Parameters OK 12:10:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:27 Set A/D data flow result=40 12:10:27 Set A/D channel type result=40 12:10:27 Set A/D encoding result=40 12:10:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:27 Set channel filter=0.000000e+000 result=40 12:10:27 Config A/D Result=40 12:10:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:27 Get A/D filter: -9.255963e+061 result=40 12:10:27 Get A/D value=-858993460 result=40 12:10:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:27 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:10:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:10:27 Aux= 12:10:27 Message to Camera, serial 64316 queued 12:11:04 Received message from Master: op=PointingHead serial=64329 12:11:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:11:04 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:11:04 Point started: ret=0 12:11:04 point_skyscan result=0 12:11:05 Check angles 12:11:05 SkyScan query 12:11:05 SkyScan query done: ret=0 az=134.685<-8979 ze=36.765<-9549 Statuses=0009 0009 12:11:05 Msec=0 True Az=134.685 Ze=36.765 Az status=0009 Ze status=0009 12:11:05 Check angles 12:11:05 SkyScan query 12:11:06 SkyScan query done: ret=0 az=116.88<-7792 ze=15.435<-10971 Statuses=0009 0009 12:11:06 Msec=750 True Az=116.88 Ze=15.435 Az status=0009 Ze status=0009 12:11:06 Check angles 12:11:06 SkyScan query 12:11:07 SkyScan query done: ret=0 az=99.45<-6630 ze=-5.55<-12370 Statuses=0009 0009 12:11:07 Msec=1500 True Az=99.45 Ze=-5.55 Az status=0009 Ze status=0009 12:11:07 Check angles 12:11:07 SkyScan query 12:11:08 SkyScan query done: ret=0 az=82.05<-5470 ze=-26.49<-13766 Statuses=0009 0009 12:11:08 Msec=2250 True Az=82.05 Ze=-26.49 Az status=0009 Ze status=0009 12:11:08 Check angles 12:11:08 SkyScan query 12:11:08 SkyScan query done: ret=0 az=64.485<-4299 ze=-38.565<-14571 Statuses=0009 0008 12:11:08 Msec=3000 True Az=64.485 Ze=-38.565 Az status=0009 Ze status=0008 12:11:08 Check angles 12:11:08 SkyScan query 12:11:09 SkyScan query done: ret=0 az=47.025<-3135 ze=-38.535<-14569 Statuses=0009 0008 12:11:09 Msec=3750 True Az=47.025 Ze=-38.535 Az status=0009 Ze status=0008 12:11:09 Check angles 12:11:09 SkyScan query 12:11:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:11:10 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:11:10 Message to Master queued w/err=0: serial=64329 error=0 12:11:15 Received message from Master: op=Filter serial=64330 12:11:15 Color wheel filter change from 0 to 0 12:11:15 FLIGetFilterPos err=0 currentPosition=0 12:11:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:11:15 Filter is already there-color wheel unchanged 12:11:15 Received message from Master: op=Shutter serial=64331 12:11:15 Shutter LASER close 12:11:15 Received message from Camera: op=State serial=64333 12:11:15 GetSingleValue result=40 Value=cccccccc 12:11:15 SkyScan query 12:11:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:11:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:16 Parameters OK 12:11:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:16 Set A/D data flow result=40 12:11:16 Set A/D channel type result=40 12:11:16 Set A/D encoding result=40 12:11:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:16 Set channel filter=0.000000e+000 result=40 12:11:16 Config A/D Result=40 12:11:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:16 Get A/D filter: -9.255963e+061 result=40 12:11:16 Get A/D value=-858993460 result=40 12:11:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:16 Parameters OK 12:11:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:16 Set A/D data flow result=40 12:11:16 Set A/D channel type result=40 12:11:16 Set A/D encoding result=40 12:11:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:16 Set channel filter=0.000000e+000 result=40 12:11:16 Config A/D Result=40 12:11:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:16 Get A/D filter: -9.255963e+061 result=40 12:11:16 Get A/D value=-858993460 result=40 12:11:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:11:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:11:16 Aux= 12:11:16 Message to Camera, serial 64333 queued 12:11:52 Received message from Master: op=PointingHead serial=64346 12:11:52 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:11:52 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:11:53 Point started: ret=0 12:11:53 point_skyscan result=0 12:11:54 Check angles 12:11:54 SkyScan query 12:11:54 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.505<-16567 Statuses=0009 0009 12:11:54 Msec=0 True Az=64.2 Ze=-68.505 Az status=0009 Ze status=0009 12:11:54 Check angles 12:11:54 SkyScan query 12:11:55 SkyScan query done: ret=0 az=81.525<-5435 ze=-89.505<-17967 Statuses=0009 0009 12:11:55 Msec=750 True Az=81.525 Ze=-89.505 Az status=0009 Ze status=0009 12:11:55 Check angles 12:11:55 SkyScan query 12:11:56 SkyScan query done: ret=0 az=99.09<-6606 ze=-110.445<-19363 Statuses=0009 0009 12:11:56 Msec=1500 True Az=99.09 Ze=-110.445 Az status=0009 Ze status=0009 12:11:56 Check angles 12:11:56 SkyScan query 12:11:56 SkyScan query done: ret=0 az=116.67<-7778 ze=-131.385<-20759 Statuses=0009 0009 12:11:56 Msec=2250 True Az=116.67 Ze=-131.385 Az status=0009 Ze status=0009 12:11:57 Check angles 12:11:57 SkyScan query 12:11:57 SkyScan query done: ret=0 az=131.19<-8746 ze=-141.54<-21436 Statuses=0009 0008 12:11:57 Msec=3000 True Az=131.19 Ze=-141.54 Az status=0009 Ze status=0008 12:11:57 Check angles 12:11:57 SkyScan query 12:11:58 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:11:58 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:11:58 Message to Master queued w/err=0: serial=64346 error=0 12:12:03 Received message from Master: op=Filter serial=64347 12:12:03 Color wheel filter change from 0 to 0 12:12:03 FLIGetFilterPos err=0 currentPosition=0 12:12:03 FLIGetStepsRemaining err=0 RemainingSteps=0 12:12:03 Filter is already there-color wheel unchanged 12:12:03 Received message from Master: op=Shutter serial=64348 12:12:03 Shutter LASER close 12:12:03 Received message from Camera: op=State serial=64350 12:12:03 GetSingleValue result=40 Value=cccccccc 12:12:03 SkyScan query 12:12:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:12:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:04 Parameters OK 12:12:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:04 Set A/D data flow result=40 12:12:04 Set A/D channel type result=40 12:12:04 Set A/D encoding result=40 12:12:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:04 Set channel filter=0.000000e+000 result=40 12:12:04 Config A/D Result=40 12:12:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:04 Get A/D filter: -9.255963e+061 result=40 12:12:04 Get A/D value=-858993460 result=40 12:12:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:04 Parameters OK 12:12:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:04 Set A/D data flow result=40 12:12:04 Set A/D channel type result=40 12:12:04 Set A/D encoding result=40 12:12:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:04 Set channel filter=0.000000e+000 result=40 12:12:04 Config A/D Result=40 12:12:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:04 Get A/D filter: -9.255963e+061 result=40 12:12:04 Get A/D value=-858993460 result=40 12:12:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:04 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:12:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:12:04 Aux= 12:12:04 Message to Camera, serial 64350 queued 12:12:40 Received message from Master: op=PointingHead serial=64362 12:12:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:12:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:12:40 Point started: ret=0 12:12:40 point_skyscan result=0 12:12:41 Check angles 12:12:41 SkyScan query 12:12:41 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 12:12:41 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 12:12:41 Check angles 12:12:41 SkyScan query 12:12:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:12:42 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:12:42 Message to Master queued w/err=0: serial=64362 error=0 12:12:47 Received message from Master: op=Filter serial=64363 12:12:47 Color wheel filter change from 0 to 0 12:12:47 FLIGetFilterPos err=0 currentPosition=0 12:12:47 FLIGetStepsRemaining err=0 RemainingSteps=0 12:12:47 Filter is already there-color wheel unchanged 12:12:47 Received message from Master: op=Shutter serial=64364 12:12:47 Shutter LASER open 12:12:47 Received message from Camera: op=State serial=64366 12:12:47 GetSingleValue result=40 Value=cccccccc 12:12:47 SkyScan query 12:12:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:12:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:48 Parameters OK 12:12:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:48 Set A/D data flow result=40 12:12:48 Set A/D channel type result=40 12:12:48 Set A/D encoding result=40 12:12:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:48 Set channel filter=0.000000e+000 result=40 12:12:48 Config A/D Result=40 12:12:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:48 Get A/D filter: -9.255963e+061 result=40 12:12:48 Get A/D value=-858993460 result=40 12:12:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:48 Parameters OK 12:12:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:48 Set A/D data flow result=40 12:12:48 Set A/D channel type result=40 12:12:48 Set A/D encoding result=40 12:12:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:48 Set channel filter=0.000000e+000 result=40 12:12:48 Config A/D Result=40 12:12:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:48 Get A/D filter: -9.255963e+061 result=40 12:12:48 Get A/D value=-858993460 result=40 12:12:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:12:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:12:48 Aux= 12:12:48 Message to Camera, serial 64366 queued 12:12:56 Received message from Master: op=Shutter serial=64376 12:12:56 Shutter LASER close 12:12:57 Received message from Master: op=PointingHead serial=64380 12:12:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:12:57 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:12:57 Point started: ret=0 12:12:57 point_skyscan result=0 12:12:58 Check angles 12:12:58 SkyScan query 12:12:59 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.04<-21536 Statuses=0009 0009 12:12:59 Msec=0 True Az=136.17 Ze=-143.04 Az status=0009 Ze status=0009 12:12:59 Check angles 12:12:59 SkyScan query 12:12:59 SkyScan query done: ret=0 az=153.645<-10243 ze=-121.98<-20132 Statuses=0009 0009 12:12:59 Msec=750 True Az=153.645 Ze=-121.98 Az status=0009 Ze status=0009 12:13:00 Check angles 12:13:00 SkyScan query 12:13:00 SkyScan query done: ret=0 az=171.495<-11433 ze=-100.635<-18709 Statuses=0009 0009 12:13:00 Msec=1500 True Az=171.495 Ze=-100.635 Az status=0009 Ze status=0009 12:13:00 Check angles 12:13:00 SkyScan query 12:13:01 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.725<-17315 Statuses=0008 0009 12:13:01 Msec=2250 True Az=176.025 Ze=-79.725 Az status=0008 Ze status=0009 12:13:01 Check angles 12:13:01 SkyScan query 12:13:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.74<-15916 Statuses=0008 0009 12:13:02 Msec=3000 True Az=175.995 Ze=-58.74 Az status=0008 Ze status=0009 12:13:02 Check angles 12:13:02 SkyScan query 12:13:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:13:02 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:13:02 Message to Master queued w/err=0: serial=64380 error=0 12:13:07 Received message from Master: op=Filter serial=64381 12:13:07 Color wheel filter change from 0 to 0 12:13:07 FLIGetFilterPos err=0 currentPosition=0 12:13:07 FLIGetStepsRemaining err=0 RemainingSteps=0 12:13:07 Filter is already there-color wheel unchanged 12:13:08 Received message from Master: op=Shutter serial=64382 12:13:08 Shutter LASER close 12:13:08 Received message from Camera: op=State serial=64384 12:13:08 GetSingleValue result=40 Value=cccccccc 12:13:08 SkyScan query 12:13:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:13:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:08 Parameters OK 12:13:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:08 Set A/D data flow result=40 12:13:08 Set A/D channel type result=40 12:13:08 Set A/D encoding result=40 12:13:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:08 Set channel filter=0.000000e+000 result=40 12:13:08 Config A/D Result=40 12:13:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:08 Get A/D filter: -9.255963e+061 result=40 12:13:08 Get A/D value=-858993460 result=40 12:13:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:08 Parameters OK 12:13:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:08 Set A/D data flow result=40 12:13:08 Set A/D channel type result=40 12:13:08 Set A/D encoding result=40 12:13:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:08 Set channel filter=0.000000e+000 result=40 12:13:08 Config A/D Result=40 12:13:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:08 Get A/D filter: -9.255963e+061 result=40 12:13:08 Get A/D value=-858993460 result=40 12:13:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:13:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:13:08 Aux= 12:13:08 Message to Camera, serial 64384 queued 12:13:45 Received message from Master: op=PointingHead serial=64397 12:13:45 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:13:45 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:13:45 Point started: ret=0 12:13:45 point_skyscan result=0 12:13:46 Check angles 12:13:46 SkyScan query 12:13:47 SkyScan query done: ret=0 az=152.625<-10175 ze=-21.24<-13416 Statuses=0009 0009 12:13:47 Msec=0 True Az=152.625 Ze=-21.24 Az status=0009 Ze status=0009 12:13:47 Check angles 12:13:47 SkyScan query 12:13:48 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.285<-12019 Statuses=0009 0009 12:13:48 Msec=750 True Az=135.12 Ze=-0.285 Az status=0009 Ze status=0009 12:13:48 Check angles 12:13:48 SkyScan query 12:13:48 SkyScan query done: ret=0 az=117.54<-7836 ze=20.655<-10623 Statuses=0009 0009 12:13:48 Msec=1500 True Az=117.54 Ze=20.655 Az status=0009 Ze status=0009 12:13:49 Check angles 12:13:49 SkyScan query 12:13:49 SkyScan query done: ret=0 az=100.11<-6674 ze=41.625<-9225 Statuses=0009 0009 12:13:49 Msec=2250 True Az=100.11 Ze=41.625 Az status=0009 Ze status=0009 12:13:49 Check angles 12:13:49 SkyScan query 12:13:50 SkyScan query done: ret=0 az=86.055<-5737 ze=51.54<-8564 Statuses=0009 0008 12:13:50 Msec=3000 True Az=86.055 Ze=51.54 Az status=0009 Ze status=0008 12:13:50 Check angles 12:13:50 SkyScan query 12:13:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:13:51 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:13:51 Message to Master queued w/err=0: serial=64397 error=0 12:13:56 Received message from Master: op=Filter serial=64398 12:13:56 Color wheel filter change from 0 to 0 12:13:56 FLIGetFilterPos err=0 currentPosition=0 12:13:56 FLIGetStepsRemaining err=0 RemainingSteps=0 12:13:56 Filter is already there-color wheel unchanged 12:13:56 Received message from Master: op=Shutter serial=64399 12:13:56 Shutter LASER close 12:13:56 Received message from Camera: op=State serial=64401 12:13:56 GetSingleValue result=40 Value=cccccccc 12:13:56 SkyScan query 12:13:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:13:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:56 Parameters OK 12:13:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:56 Set A/D data flow result=40 12:13:56 Set A/D channel type result=40 12:13:56 Set A/D encoding result=40 12:13:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:56 Set channel filter=0.000000e+000 result=40 12:13:56 Config A/D Result=40 12:13:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:56 Get A/D filter: -9.255963e+061 result=40 12:13:56 Get A/D value=-858993460 result=40 12:13:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:56 Parameters OK 12:13:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:56 Set A/D data flow result=40 12:13:56 Set A/D channel type result=40 12:13:56 Set A/D encoding result=40 12:13:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:56 Set channel filter=0.000000e+000 result=40 12:13:56 Config A/D Result=40 12:13:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:56 Get A/D filter: -9.255963e+061 result=40 12:13:56 Get A/D value=-858993460 result=40 12:13:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:13:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:13:56 Aux= 12:13:56 Message to Camera, serial 64401 queued 12:14:33 Received message from Master: op=PointingHead serial=64414 12:14:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:14:33 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:14:34 Point started: ret=0 12:14:34 point_skyscan result=0 12:14:34 Check angles 12:14:34 SkyScan query 12:14:35 SkyScan query done: ret=0 az=109.395<-7293 ze=38.49<-9434 Statuses=0009 0008 12:14:35 Msec=0 True Az=109.395 Ze=38.49 Az status=0009 Ze status=0008 12:14:35 Check angles 12:14:35 SkyScan query 12:14:36 SkyScan query done: ret=0 az=126.87<-8458 ze=38.505<-9433 Statuses=0009 0008 12:14:36 Msec=750 True Az=126.87 Ze=38.505 Az status=0009 Ze status=0008 12:14:36 Check angles 12:14:36 SkyScan query 12:14:36 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 12:14:36 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 12:14:37 Check angles 12:14:37 SkyScan query 12:14:37 SkyScan query done: ret=0 az=161.685<-10779 ze=38.505<-9433 Statuses=0009 0008 12:14:37 Msec=2250 True Az=161.685 Ze=38.505 Az status=0009 Ze status=0008 12:14:37 Check angles 12:14:37 SkyScan query 12:14:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 12:14:38 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 12:14:38 Check angles 12:14:38 SkyScan query 12:14:39 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:14:39 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:14:39 Message to Master queued w/err=0: serial=64414 error=0 12:14:44 Received message from Master: op=Filter serial=64415 12:14:44 Color wheel filter change from 0 to 0 12:14:44 FLIGetFilterPos err=0 currentPosition=0 12:14:44 FLIGetStepsRemaining err=0 RemainingSteps=0 12:14:44 Filter is already there-color wheel unchanged 12:14:44 Received message from Master: op=Shutter serial=64416 12:14:44 Shutter LASER close 12:14:44 Received message from Camera: op=State serial=64418 12:14:44 GetSingleValue result=40 Value=cccccccc 12:14:44 SkyScan query 12:14:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:14:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:44 Parameters OK 12:14:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:44 Set A/D data flow result=40 12:14:44 Set A/D channel type result=40 12:14:44 Set A/D encoding result=40 12:14:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:44 Set channel filter=0.000000e+000 result=40 12:14:44 Config A/D Result=40 12:14:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:44 Get A/D filter: -9.255963e+061 result=40 12:14:44 Get A/D value=-858993460 result=40 12:14:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:44 Parameters OK 12:14:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:44 Set A/D data flow result=40 12:14:44 Set A/D channel type result=40 12:14:44 Set A/D encoding result=40 12:14:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:44 Set channel filter=0.000000e+000 result=40 12:14:44 Config A/D Result=40 12:14:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:44 Get A/D filter: -9.255963e+061 result=40 12:14:44 Get A/D value=-858993460 result=40 12:14:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:14:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:14:44 Aux= 12:14:44 Message to Camera, serial 64418 queued 12:15:21 Received message from Master: op=PointingHead serial=64431 12:15:21 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:15:21 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:15:22 Point started: ret=0 12:15:22 point_skyscan result=0 12:15:22 Check angles 12:15:22 SkyScan query 12:15:23 SkyScan query done: ret=0 az=152.625<-10175 ze=8.205<-11453 Statuses=0009 0009 12:15:23 Msec=0 True Az=152.625 Ze=8.205 Az status=0009 Ze status=0009 12:15:23 Check angles 12:15:23 SkyScan query 12:15:24 SkyScan query done: ret=0 az=135.21<-9014 ze=-12.72<-12848 Statuses=0009 0009 12:15:24 Msec=750 True Az=135.21 Ze=-12.72 Az status=0009 Ze status=0009 12:15:24 Check angles 12:15:24 SkyScan query 12:15:25 SkyScan query done: ret=0 az=117.225<-7815 ze=-34.17<-14278 Statuses=0009 0009 12:15:25 Msec=1500 True Az=117.225 Ze=-34.17 Az status=0009 Ze status=0009 12:15:25 Check angles 12:15:25 SkyScan query 12:15:25 SkyScan query done: ret=0 az=99.93<-6662 ze=-51.57<-15438 Statuses=0009 0009 12:15:25 Msec=2250 True Az=99.93 Ze=-51.57 Az status=0009 Ze status=0009 12:15:25 Check angles 12:15:25 SkyScan query 12:15:26 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 12:15:26 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 12:15:26 Check angles 12:15:26 SkyScan query 12:15:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:15:27 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:15:27 Message to Master queued w/err=0: serial=64431 error=0 12:15:29 Received message from Master: op=Identify serial=64432 12:15:32 Received message from Master: op=Filter serial=64435 12:15:32 Color wheel filter change from 0 to 0 12:15:32 FLIGetFilterPos err=0 currentPosition=0 12:15:32 FLIGetStepsRemaining err=0 RemainingSteps=0 12:15:32 Filter is already there-color wheel unchanged 12:15:32 Received message from Master: op=Shutter serial=64436 12:15:32 Shutter LASER close 12:15:32 Received message from Camera: op=State serial=64438 12:15:32 GetSingleValue result=40 Value=cccccccc 12:15:32 SkyScan query 12:15:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:15:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:33 Parameters OK 12:15:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:33 Set A/D data flow result=40 12:15:33 Set A/D channel type result=40 12:15:33 Set A/D encoding result=40 12:15:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:33 Set channel filter=0.000000e+000 result=40 12:15:33 Config A/D Result=40 12:15:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:33 Get A/D filter: -9.255963e+061 result=40 12:15:33 Get A/D value=-858993460 result=40 12:15:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:33 Parameters OK 12:15:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:33 Set A/D data flow result=40 12:15:33 Set A/D channel type result=40 12:15:33 Set A/D encoding result=40 12:15:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:33 Set channel filter=0.000000e+000 result=40 12:15:33 Config A/D Result=40 12:15:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:33 Get A/D filter: -9.255963e+061 result=40 12:15:33 Get A/D value=-858993460 result=40 12:15:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:15:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:15:33 Aux= 12:15:33 Message to Camera, serial 64438 queued [UTC 2018-12-11 12:15:54] 12:16:09 Received message from Master: op=PointingHead serial=64451 12:16:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:16:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:16:10 Point started: ret=0 12:16:10 point_skyscan result=0 12:16:11 Check angles 12:16:11 SkyScan query 12:16:11 SkyScan query done: ret=0 az=109.425<-7295 ze=-81.795<-17453 Statuses=0009 0009 12:16:11 Msec=0 True Az=109.425 Ze=-81.795 Az status=0009 Ze status=0009 12:16:11 Check angles 12:16:11 SkyScan query 12:16:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.735<-18849 Statuses=0008 0009 12:16:12 Msec=750 True Az=112.995 Ze=-102.735 Az status=0008 Ze status=0009 12:16:12 Check angles 12:16:12 SkyScan query 12:16:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.69<-20246 Statuses=0008 0009 12:16:13 Msec=1500 True Az=112.995 Ze=-123.69 Az status=0008 Ze status=0009 12:16:13 Check angles 12:16:13 SkyScan query 12:16:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.615<-21641 Statuses=0008 0009 12:16:13 Msec=2250 True Az=112.995 Ze=-144.615 Az status=0008 Ze status=0009 12:16:14 Check angles 12:16:14 SkyScan query 12:16:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.57<-23038 Statuses=0008 0009 12:16:14 Msec=3000 True Az=112.995 Ze=-165.57 Az status=0008 Ze status=0009 12:16:14 Check angles 12:16:14 SkyScan query 12:16:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:16:15 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:16:15 Message to Master queued w/err=0: serial=64451 error=0 12:16:20 Received message from Master: op=Filter serial=64452 12:16:20 Color wheel filter change from 0 to 0 12:16:20 FLIGetFilterPos err=0 currentPosition=0 12:16:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:16:20 Filter is already there-color wheel unchanged 12:16:20 Received message from Master: op=Shutter serial=64453 12:16:20 Shutter LASER open 12:16:20 Received message from Camera: op=State serial=64455 12:16:20 GetSingleValue result=40 Value=cccccccc 12:16:20 SkyScan query 12:16:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:16:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:21 Parameters OK 12:16:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:21 Set A/D data flow result=40 12:16:21 Set A/D channel type result=40 12:16:21 Set A/D encoding result=40 12:16:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:21 Set channel filter=0.000000e+000 result=40 12:16:21 Config A/D Result=40 12:16:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:21 Get A/D filter: -9.255963e+061 result=40 12:16:21 Get A/D value=-858993460 result=40 12:16:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:21 Parameters OK 12:16:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:21 Set A/D data flow result=40 12:16:21 Set A/D channel type result=40 12:16:21 Set A/D encoding result=40 12:16:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:21 Set channel filter=0.000000e+000 result=40 12:16:21 Config A/D Result=40 12:16:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:21 Get A/D filter: -9.255963e+061 result=40 12:16:21 Get A/D value=-858993460 result=40 12:16:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:16:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:16:21 Aux= 12:16:21 Message to Camera, serial 64455 queued 12:16:29 Received message from Master: op=Shutter serial=64465 12:16:29 Shutter LASER close 12:16:30 Received message from Master: op=PointingHead serial=64469 12:16:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:16:30 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:16:30 Point started: ret=0 12:16:30 point_skyscan result=0 12:16:31 Check angles 12:16:31 SkyScan query 12:16:31 SkyScan query done: ret=0 az=89.895<-5993 ze=157.185<-1521 Statuses=0009 0009 12:16:31 Msec=0 True Az=89.895 Ze=157.185 Az status=0009 Ze status=0009 12:16:32 Check angles 12:16:32 SkyScan query 12:16:32 SkyScan query done: ret=0 az=72.3<-4820 ze=136.215<-2919 Statuses=0009 0009 12:16:32 Msec=750 True Az=72.3 Ze=136.215 Az status=0009 Ze status=0009 12:16:32 Check angles 12:16:32 SkyScan query 12:16:33 SkyScan query done: ret=0 az=54.99<-3666 ze=115.29<-4314 Statuses=0009 0009 12:16:33 Msec=1500 True Az=54.99 Ze=115.29 Az status=0009 Ze status=0009 12:16:33 Check angles 12:16:33 SkyScan query 12:16:34 SkyScan query done: ret=0 az=40.905<-2727 ze=93.87<-5742 Statuses=0009 0009 12:16:34 Msec=2250 True Az=40.905 Ze=93.87 Az status=0009 Ze status=0009 12:16:34 Check angles 12:16:34 SkyScan query 12:16:34 SkyScan query done: ret=0 az=40.995<-2733 ze=72.87<-7142 Statuses=0008 0009 12:16:34 Msec=3000 True Az=40.995 Ze=72.87 Az status=0008 Ze status=0009 12:16:35 Check angles 12:16:35 SkyScan query 12:16:35 SkyScan query done: ret=0 az=40.995<-2733 ze=52.515<-8499 Statuses=0008 0009 12:16:35 Msec=3750 True Az=40.995 Ze=52.515 Az status=0008 Ze status=0009 12:16:35 Check angles 12:16:35 SkyScan query 12:16:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:16:36 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:16:36 Message to Master queued w/err=0: serial=64469 error=0 12:16:41 Received message from Master: op=Filter serial=64470 12:16:41 Color wheel filter change from 0 to 0 12:16:41 FLIGetFilterPos err=0 currentPosition=0 12:16:41 FLIGetStepsRemaining err=0 RemainingSteps=0 12:16:41 Filter is already there-color wheel unchanged 12:16:41 Received message from Master: op=Shutter serial=64471 12:16:41 Shutter LASER close 12:16:41 Received message from Camera: op=State serial=64473 12:16:41 GetSingleValue result=40 Value=cccccccc 12:16:41 SkyScan query 12:16:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:16:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:42 Parameters OK 12:16:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:42 Set A/D data flow result=40 12:16:42 Set A/D channel type result=40 12:16:42 Set A/D encoding result=40 12:16:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:42 Set channel filter=0.000000e+000 result=40 12:16:42 Config A/D Result=40 12:16:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:42 Get A/D filter: -9.255963e+061 result=40 12:16:42 Get A/D value=-858993460 result=40 12:16:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:42 Parameters OK 12:16:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:42 Set A/D data flow result=40 12:16:42 Set A/D channel type result=40 12:16:42 Set A/D encoding result=40 12:16:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:42 Set channel filter=0.000000e+000 result=40 12:16:42 Config A/D Result=40 12:16:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:42 Get A/D filter: -9.255963e+061 result=40 12:16:42 Get A/D value=-858993460 result=40 12:16:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:16:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:16:42 Aux= 12:16:42 Message to Camera, serial 64473 queued 12:17:19 Received message from Master: op=PointingHead serial=64486 12:17:19 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:17:19 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:17:19 Point started: ret=0 12:17:19 point_skyscan result=0 12:17:20 Check angles 12:17:20 SkyScan query 12:17:20 SkyScan query done: ret=0 az=64.215<-4281 ze=66.54<-7564 Statuses=0009 0008 12:17:20 Msec=0 True Az=64.215 Ze=66.54 Az status=0009 Ze status=0008 12:17:21 Check angles 12:17:21 SkyScan query 12:17:21 SkyScan query done: ret=0 az=81.57<-5438 ze=66.51<-7566 Statuses=0009 0008 12:17:21 Msec=750 True Az=81.57 Ze=66.51 Az status=0009 Ze status=0008 12:17:21 Check angles 12:17:21 SkyScan query 12:17:22 SkyScan query done: ret=0 az=99.105<-6607 ze=66.495<-7567 Statuses=0009 0008 12:17:22 Msec=1500 True Az=99.105 Ze=66.495 Az status=0009 Ze status=0008 12:17:22 Check angles 12:17:22 SkyScan query 12:17:23 SkyScan query done: ret=0 az=116.7<-7780 ze=66.495<-7567 Statuses=0009 0008 12:17:23 Msec=2250 True Az=116.7 Ze=66.495 Az status=0009 Ze status=0008 12:17:23 Check angles 12:17:23 SkyScan query 12:17:23 SkyScan query done: ret=0 az=134.22<-8948 ze=66.495<-7567 Statuses=0009 0008 12:17:23 Msec=3000 True Az=134.22 Ze=66.495 Az status=0009 Ze status=0008 12:17:24 Check angles 12:17:24 SkyScan query 12:17:24 SkyScan query done: ret=0 az=151.605<-10107 ze=66.495<-7567 Statuses=0009 0008 12:17:24 Msec=3750 True Az=151.605 Ze=66.495 Az status=0009 Ze status=0008 12:17:24 Check angles 12:17:24 SkyScan query 12:17:25 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:17:25 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 12:17:25 Message to Master queued w/err=0: serial=64486 error=0 12:17:30 Received message from Master: op=Filter serial=64487 12:17:30 Color wheel filter change from 0 to 0 12:17:30 FLIGetFilterPos err=0 currentPosition=0 12:17:30 FLIGetStepsRemaining err=0 RemainingSteps=0 12:17:30 Filter is already there-color wheel unchanged 12:17:30 Received message from Master: op=Shutter serial=64488 12:17:30 Shutter LASER close 12:17:30 Received message from Camera: op=State serial=64490 12:17:30 GetSingleValue result=40 Value=cccccccc 12:17:30 SkyScan query 12:17:31 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:17:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:31 Parameters OK 12:17:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:31 Set A/D data flow result=40 12:17:31 Set A/D channel type result=40 12:17:31 Set A/D encoding result=40 12:17:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:31 Set channel filter=0.000000e+000 result=40 12:17:31 Config A/D Result=40 12:17:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:31 Get A/D filter: -9.255963e+061 result=40 12:17:31 Get A/D value=-858993460 result=40 12:17:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:31 Parameters OK 12:17:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:31 Set A/D data flow result=40 12:17:31 Set A/D channel type result=40 12:17:31 Set A/D encoding result=40 12:17:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:31 Set channel filter=0.000000e+000 result=40 12:17:31 Config A/D Result=40 12:17:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:31 Get A/D filter: -9.255963e+061 result=40 12:17:31 Get A/D value=-858993460 result=40 12:17:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:31 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:17:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:17:31 Aux= 12:17:31 Message to Camera, serial 64490 queued 12:18:07 Received message from Master: op=PointingHead serial=64503 12:18:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:18:07 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:18:08 Point started: ret=0 12:18:08 point_skyscan result=0 12:18:09 Check angles 12:18:09 SkyScan query 12:18:09 SkyScan query done: ret=0 az=134.58<-8972 ze=36.27<-9582 Statuses=0009 0009 12:18:09 Msec=0 True Az=134.58 Ze=36.27 Az status=0009 Ze status=0009 12:18:09 Check angles 12:18:09 SkyScan query 12:18:10 SkyScan query done: ret=0 az=117.06<-7804 ze=15.33<-10978 Statuses=0009 0009 12:18:10 Msec=750 True Az=117.06 Ze=15.33 Az status=0009 Ze status=0009 12:18:10 Check angles 12:18:10 SkyScan query 12:18:11 SkyScan query done: ret=0 az=99.735<-6649 ze=-5.625<-12375 Statuses=0009 0009 12:18:11 Msec=1500 True Az=99.735 Ze=-5.625 Az status=0009 Ze status=0009 12:18:11 Check angles 12:18:11 SkyScan query 12:18:11 SkyScan query done: ret=0 az=82.215<-5481 ze=-26.595<-13773 Statuses=0009 0009 12:18:11 Msec=2250 True Az=82.215 Ze=-26.595 Az status=0009 Ze status=0009 12:18:12 Check angles 12:18:12 SkyScan query 12:18:12 SkyScan query done: ret=0 az=64.785<-4319 ze=-38.58<-14572 Statuses=0009 0008 12:18:12 Msec=3000 True Az=64.785 Ze=-38.58 Az status=0009 Ze status=0008 12:18:12 Check angles 12:18:12 SkyScan query 12:18:13 SkyScan query done: ret=0 az=47.355<-3157 ze=-38.52<-14568 Statuses=0009 0008 12:18:13 Msec=3750 True Az=47.355 Ze=-38.52 Az status=0009 Ze status=0008 12:18:13 Check angles 12:18:13 SkyScan query 12:18:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:18:14 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:18:14 Message to Master queued w/err=0: serial=64503 error=0 12:18:19 Received message from Master: op=Filter serial=64504 12:18:19 Color wheel filter change from 0 to 0 12:18:19 FLIGetFilterPos err=0 currentPosition=0 12:18:19 FLIGetStepsRemaining err=0 RemainingSteps=0 12:18:19 Filter is already there-color wheel unchanged 12:18:19 Received message from Master: op=Shutter serial=64505 12:18:19 Shutter LASER close 12:18:19 Received message from Camera: op=State serial=64507 12:18:19 GetSingleValue result=40 Value=cccccccc 12:18:19 SkyScan query 12:18:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:18:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:20 Parameters OK 12:18:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:20 Set A/D data flow result=40 12:18:20 Set A/D channel type result=40 12:18:20 Set A/D encoding result=40 12:18:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:20 Set channel filter=0.000000e+000 result=40 12:18:20 Config A/D Result=40 12:18:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:20 Get A/D filter: -9.255963e+061 result=40 12:18:20 Get A/D value=-858993460 result=40 12:18:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:20 Parameters OK 12:18:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:20 Set A/D data flow result=40 12:18:20 Set A/D channel type result=40 12:18:20 Set A/D encoding result=40 12:18:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:20 Set channel filter=0.000000e+000 result=40 12:18:20 Config A/D Result=40 12:18:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:20 Get A/D filter: -9.255963e+061 result=40 12:18:20 Get A/D value=-858993460 result=40 12:18:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:18:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:18:20 Aux= 12:18:20 Message to Camera, serial 64507 queued 12:18:56 Received message from Master: op=PointingHead serial=64520 12:18:56 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:18:56 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:18:57 Point started: ret=0 12:18:57 point_skyscan result=0 12:18:57 Check angles 12:18:57 SkyScan query 12:18:58 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.58<-16572 Statuses=0009 0009 12:18:58 Msec=0 True Az=64.2 Ze=-68.58 Az status=0009 Ze status=0009 12:18:58 Check angles 12:18:58 SkyScan query 12:18:59 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.55<-17970 Statuses=0009 0009 12:18:59 Msec=750 True Az=81.585 Ze=-89.55 Az status=0009 Ze status=0009 12:18:59 Check angles 12:18:59 SkyScan query 12:19:00 SkyScan query done: ret=0 az=99.18<-6612 ze=-110.505<-19367 Statuses=0009 0009 12:19:00 Msec=1500 True Az=99.18 Ze=-110.505 Az status=0009 Ze status=0009 12:19:00 Check angles 12:19:00 SkyScan query 12:19:00 SkyScan query done: ret=0 az=116.715<-7781 ze=-131.43<-20762 Statuses=0009 0009 12:19:00 Msec=2250 True Az=116.715 Ze=-131.43 Az status=0009 Ze status=0009 12:19:00 Check angles 12:19:00 SkyScan query 12:19:01 SkyScan query done: ret=0 az=131.19<-8746 ze=-141.555<-21437 Statuses=0009 0008 12:19:01 Msec=3000 True Az=131.19 Ze=-141.555 Az status=0009 Ze status=0008 12:19:01 Check angles 12:19:01 SkyScan query 12:19:02 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 12:19:02 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 12:19:02 Message to Master queued w/err=0: serial=64520 error=0 12:19:07 Received message from Master: op=Filter serial=64521 12:19:07 Color wheel filter change from 0 to 0 12:19:07 FLIGetFilterPos err=0 currentPosition=0 12:19:07 FLIGetStepsRemaining err=0 RemainingSteps=0 12:19:07 Filter is already there-color wheel unchanged 12:19:07 Received message from Master: op=Shutter serial=64522 12:19:07 Shutter LASER close 12:19:07 Received message from Camera: op=State serial=64524 12:19:07 GetSingleValue result=40 Value=cccccccc 12:19:07 SkyScan query 12:19:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:19:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:08 Parameters OK 12:19:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:08 Set A/D data flow result=40 12:19:08 Set A/D channel type result=40 12:19:08 Set A/D encoding result=40 12:19:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:08 Set channel filter=0.000000e+000 result=40 12:19:08 Config A/D Result=40 12:19:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:08 Get A/D filter: -9.255963e+061 result=40 12:19:08 Get A/D value=-858993460 result=40 12:19:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:08 Parameters OK 12:19:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:08 Set A/D data flow result=40 12:19:08 Set A/D channel type result=40 12:19:08 Set A/D encoding result=40 12:19:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:08 Set channel filter=0.000000e+000 result=40 12:19:08 Config A/D Result=40 12:19:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:08 Get A/D filter: -9.255963e+061 result=40 12:19:08 Get A/D value=-858993460 result=40 12:19:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:08 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:19:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:19:08 Aux= 12:19:08 Message to Camera, serial 64524 queued 12:19:44 Received message from Master: op=PointingHead serial=64537 12:19:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:19:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:19:45 Point started: ret=0 12:19:45 point_skyscan result=0 12:19:46 Check angles 12:19:46 SkyScan query 12:19:46 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 12:19:46 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 12:19:46 Check angles 12:19:46 SkyScan query 12:19:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:19:47 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:19:47 Message to Master queued w/err=0: serial=64537 error=0 12:19:52 Received message from Master: op=Filter serial=64538 12:19:52 Color wheel filter change from 0 to 0 12:19:52 FLIGetFilterPos err=0 currentPosition=0 12:19:52 FLIGetStepsRemaining err=0 RemainingSteps=0 12:19:52 Filter is already there-color wheel unchanged 12:19:52 Received message from Master: op=Shutter serial=64539 12:19:52 Shutter LASER open 12:19:52 Received message from Camera: op=State serial=64541 12:19:52 GetSingleValue result=40 Value=cccccccc 12:19:52 SkyScan query 12:19:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:19:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:53 Parameters OK 12:19:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:53 Set A/D data flow result=40 12:19:53 Set A/D channel type result=40 12:19:53 Set A/D encoding result=40 12:19:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:53 Set channel filter=0.000000e+000 result=40 12:19:53 Config A/D Result=40 12:19:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:53 Get A/D filter: -9.255963e+061 result=40 12:19:53 Get A/D value=-858993460 result=40 12:19:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:53 Parameters OK 12:19:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:53 Set A/D data flow result=40 12:19:53 Set A/D channel type result=40 12:19:53 Set A/D encoding result=40 12:19:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:53 Set channel filter=0.000000e+000 result=40 12:19:53 Config A/D Result=40 12:19:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:53 Get A/D filter: -9.255963e+061 result=40 12:19:53 Get A/D value=-858993460 result=40 12:19:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:19:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:19:53 Aux= 12:19:53 Message to Camera, serial 64541 queued 12:20:01 Received message from Master: op=Shutter serial=64551 12:20:01 Shutter LASER close 12:20:02 Received message from Master: op=PointingHead serial=64555 12:20:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:20:02 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:20:02 Point started: ret=0 12:20:02 point_skyscan result=0 12:20:03 Check angles 12:20:03 SkyScan query 12:20:03 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.595<-21573 Statuses=0009 0009 12:20:03 Msec=0 True Az=135.705 Ze=-143.595 Az status=0009 Ze status=0009 12:20:04 Check angles 12:20:04 SkyScan query 12:20:04 SkyScan query done: ret=0 az=153.555<-10237 ze=-122.175<-20145 Statuses=0009 0009 12:20:04 Msec=750 True Az=153.555 Ze=-122.175 Az status=0009 Ze status=0009 12:20:04 Check angles 12:20:04 SkyScan query 12:20:05 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.74<-18716 Statuses=0009 0009 12:20:05 Msec=1500 True Az=171.405 Ze=-100.74 Az status=0009 Ze status=0009 12:20:05 Check angles 12:20:05 SkyScan query 12:20:06 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.845<-17323 Statuses=0008 0009 12:20:06 Msec=2250 True Az=176.025 Ze=-79.845 Az status=0008 Ze status=0009 12:20:06 Check angles 12:20:06 SkyScan query 12:20:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.83<-15922 Statuses=0008 0009 12:20:06 Msec=3000 True Az=175.995 Ze=-58.83 Az status=0008 Ze status=0009 12:20:07 Check angles 12:20:07 SkyScan query 12:20:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:20:07 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:20:07 Message to Master queued w/err=0: serial=64555 error=0 12:20:12 Received message from Master: op=Filter serial=64556 12:20:12 Color wheel filter change from 0 to 0 12:20:12 FLIGetFilterPos err=0 currentPosition=0 12:20:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:20:12 Filter is already there-color wheel unchanged 12:20:12 Received message from Master: op=Shutter serial=64557 12:20:12 Shutter LASER close 12:20:13 Received message from Camera: op=State serial=64559 12:20:13 GetSingleValue result=40 Value=cccccccc 12:20:13 SkyScan query 12:20:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:20:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:13 Parameters OK 12:20:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:13 Set A/D data flow result=40 12:20:13 Set A/D channel type result=40 12:20:13 Set A/D encoding result=40 12:20:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:13 Set channel filter=0.000000e+000 result=40 12:20:13 Config A/D Result=40 12:20:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:13 Get A/D filter: -9.255963e+061 result=40 12:20:13 Get A/D value=-858993460 result=40 12:20:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:13 Parameters OK 12:20:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:13 Set A/D data flow result=40 12:20:13 Set A/D channel type result=40 12:20:13 Set A/D encoding result=40 12:20:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:13 Set channel filter=0.000000e+000 result=40 12:20:13 Config A/D Result=40 12:20:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:13 Get A/D filter: -9.255963e+061 result=40 12:20:13 Get A/D value=-858993460 result=40 12:20:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:20:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:20:13 Aux= 12:20:13 Message to Camera, serial 64559 queued 12:20:50 Received message from Master: op=PointingHead serial=64572 12:20:50 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:20:50 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:20:50 Point started: ret=0 12:20:50 point_skyscan result=0 12:20:51 Check angles 12:20:51 SkyScan query 12:20:52 SkyScan query done: ret=0 az=152.37<-10158 ze=-21.18<-13412 Statuses=0009 0009 12:20:52 Msec=0 True Az=152.37 Ze=-21.18 Az status=0009 Ze status=0009 12:20:52 Check angles 12:20:52 SkyScan query 12:20:52 SkyScan query done: ret=0 az=134.94<-8996 ze=-0.24<-12016 Statuses=0009 0009 12:20:52 Msec=750 True Az=134.94 Ze=-0.24 Az status=0009 Ze status=0009 12:20:53 Check angles 12:20:53 SkyScan query 12:20:53 SkyScan query done: ret=0 az=117.345<-7823 ze=20.745<-10617 Statuses=0009 0009 12:20:53 Msec=1500 True Az=117.345 Ze=20.745 Az status=0009 Ze status=0009 12:20:53 Check angles 12:20:53 SkyScan query 12:20:54 SkyScan query done: ret=0 az=100.02<-6668 ze=41.67<-9222 Statuses=0009 0009 12:20:54 Msec=2250 True Az=100.02 Ze=41.67 Az status=0009 Ze status=0009 12:20:54 Check angles 12:20:54 SkyScan query 12:20:55 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 12:20:55 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 12:20:55 Check angles 12:20:55 SkyScan query 12:20:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:20:55 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:20:55 Message to Master queued w/err=0: serial=64572 error=0 12:21:00 Received message from Master: op=Filter serial=64573 12:21:00 Color wheel filter change from 0 to 0 12:21:00 FLIGetFilterPos err=0 currentPosition=0 12:21:00 FLIGetStepsRemaining err=0 RemainingSteps=0 12:21:00 Filter is already there-color wheel unchanged 12:21:01 Received message from Master: op=Shutter serial=64574 12:21:01 Shutter LASER close 12:21:01 Received message from Camera: op=State serial=64576 12:21:01 GetSingleValue result=40 Value=cccccccc 12:21:01 SkyScan query 12:21:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:21:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:01 Parameters OK 12:21:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:01 Set A/D data flow result=40 12:21:01 Set A/D channel type result=40 12:21:01 Set A/D encoding result=40 12:21:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:01 Set channel filter=0.000000e+000 result=40 12:21:01 Config A/D Result=40 12:21:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:01 Get A/D filter: -9.255963e+061 result=40 12:21:01 Get A/D value=-858993460 result=40 12:21:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:01 Parameters OK 12:21:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:01 Set A/D data flow result=40 12:21:01 Set A/D channel type result=40 12:21:01 Set A/D encoding result=40 12:21:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:01 Set channel filter=0.000000e+000 result=40 12:21:01 Config A/D Result=40 12:21:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:01 Get A/D filter: -9.255963e+061 result=40 12:21:01 Get A/D value=-858993460 result=40 12:21:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:21:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:21:01 Aux= 12:21:01 Message to Camera, serial 64576 queued 12:21:37 Received message from Master: op=PointingHead serial=64588 12:21:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:21:37 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:21:37 Point started: ret=0 12:21:37 point_skyscan result=0 12:21:38 Check angles 12:21:38 SkyScan query 12:21:39 SkyScan query done: ret=0 az=109.26<-7284 ze=38.49<-9434 Statuses=0009 0008 12:21:39 Msec=0 True Az=109.26 Ze=38.49 Az status=0009 Ze status=0008 12:21:39 Check angles 12:21:39 SkyScan query 12:21:40 SkyScan query done: ret=0 az=127.08<-8472 ze=38.505<-9433 Statuses=0009 0008 12:21:40 Msec=750 True Az=127.08 Ze=38.505 Az status=0009 Ze status=0008 12:21:40 Check angles 12:21:40 SkyScan query 12:21:40 SkyScan query done: ret=0 az=144.63<-9642 ze=38.505<-9433 Statuses=0009 0008 12:21:40 Msec=1500 True Az=144.63 Ze=38.505 Az status=0009 Ze status=0008 12:21:41 Check angles 12:21:41 SkyScan query 12:21:41 SkyScan query done: ret=0 az=162.09<-10806 ze=38.505<-9433 Statuses=0009 0008 12:21:41 Msec=2250 True Az=162.09 Ze=38.505 Az status=0009 Ze status=0008 12:21:41 Check angles 12:21:41 SkyScan query 12:21:42 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:21:42 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:21:42 Check angles 12:21:42 SkyScan query 12:21:43 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:21:43 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:21:43 Message to Master queued w/err=0: serial=64588 error=0 12:21:48 Received message from Master: op=Filter serial=64589 12:21:48 Color wheel filter change from 0 to 0 12:21:48 FLIGetFilterPos err=0 currentPosition=0 12:21:48 FLIGetStepsRemaining err=0 RemainingSteps=0 12:21:48 Filter is already there-color wheel unchanged 12:21:48 Received message from Master: op=Shutter serial=64590 12:21:48 Shutter LASER close 12:21:48 Received message from Camera: op=State serial=64592 12:21:48 GetSingleValue result=40 Value=cccccccc 12:21:48 SkyScan query 12:21:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:21:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:48 Parameters OK 12:21:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:48 Set A/D data flow result=40 12:21:48 Set A/D channel type result=40 12:21:48 Set A/D encoding result=40 12:21:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:48 Set channel filter=0.000000e+000 result=40 12:21:48 Config A/D Result=40 12:21:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:48 Get A/D filter: -9.255963e+061 result=40 12:21:48 Get A/D value=-858993460 result=40 12:21:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:48 Parameters OK 12:21:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:48 Set A/D data flow result=40 12:21:48 Set A/D channel type result=40 12:21:48 Set A/D encoding result=40 12:21:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:48 Set channel filter=0.000000e+000 result=40 12:21:48 Config A/D Result=40 12:21:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:48 Get A/D filter: -9.255963e+061 result=40 12:21:48 Get A/D value=-858993460 result=40 12:21:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:21:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:21:48 Aux= 12:21:48 Message to Camera, serial 64592 queued 12:22:25 Received message from Master: op=PointingHead serial=64605 12:22:25 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:22:25 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:22:26 Point started: ret=0 12:22:26 point_skyscan result=0 12:22:26 Check angles 12:22:26 SkyScan query 12:22:27 SkyScan query done: ret=0 az=152.955<-10197 ze=8.625<-11425 Statuses=0009 0009 12:22:27 Msec=0 True Az=152.955 Ze=8.625 Az status=0009 Ze status=0009 12:22:27 Check angles 12:22:27 SkyScan query 12:22:28 SkyScan query done: ret=0 az=135.54<-9036 ze=-12.33<-12822 Statuses=0009 0009 12:22:28 Msec=750 True Az=135.54 Ze=-12.33 Az status=0009 Ze status=0009 12:22:28 Check angles 12:22:28 SkyScan query 12:22:28 SkyScan query done: ret=0 az=117.825<-7855 ze=-33.255<-14217 Statuses=0009 0009 12:22:28 Msec=1500 True Az=117.825 Ze=-33.255 Az status=0009 Ze status=0009 12:22:29 Check angles 12:22:29 SkyScan query 12:22:29 SkyScan query done: ret=0 az=100.185<-6679 ze=-51.555<-15437 Statuses=0009 0009 12:22:29 Msec=2250 True Az=100.185 Ze=-51.555 Az status=0009 Ze status=0009 12:22:29 Check angles 12:22:29 SkyScan query 12:22:30 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 12:22:30 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 12:22:30 Check angles 12:22:30 SkyScan query 12:22:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:22:31 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:22:31 Message to Master queued w/err=0: serial=64605 error=0 12:22:36 Received message from Master: op=Filter serial=64606 12:22:36 Color wheel filter change from 0 to 0 12:22:36 FLIGetFilterPos err=0 currentPosition=0 12:22:36 FLIGetStepsRemaining err=0 RemainingSteps=0 12:22:36 Filter is already there-color wheel unchanged 12:22:36 Received message from Master: op=Shutter serial=64607 12:22:36 Shutter LASER close 12:22:36 Received message from Camera: op=State serial=64609 12:22:36 GetSingleValue result=40 Value=cccccccc 12:22:36 SkyScan query 12:22:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:22:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:36 Parameters OK 12:22:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:36 Set A/D data flow result=40 12:22:36 Set A/D channel type result=40 12:22:36 Set A/D encoding result=40 12:22:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:36 Set channel filter=0.000000e+000 result=40 12:22:36 Config A/D Result=40 12:22:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:36 Get A/D filter: -9.255963e+061 result=40 12:22:36 Get A/D value=-858993460 result=40 12:22:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:36 Parameters OK 12:22:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:36 Set A/D data flow result=40 12:22:36 Set A/D channel type result=40 12:22:36 Set A/D encoding result=40 12:22:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:36 Set channel filter=0.000000e+000 result=40 12:22:36 Config A/D Result=40 12:22:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:36 Get A/D filter: -9.255963e+061 result=40 12:22:36 Get A/D value=-858993460 result=40 12:22:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:22:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:22:36 Aux= 12:22:36 Message to Camera, serial 64609 queued 12:23:13 Received message from Master: op=PointingHead serial=64622 12:23:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:23:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:23:14 Point started: ret=0 12:23:14 point_skyscan result=0 12:23:14 Check angles 12:23:14 SkyScan query 12:23:15 SkyScan query done: ret=0 az=109.23<-7282 ze=-81.555<-17437 Statuses=0009 0009 12:23:15 Msec=0 True Az=109.23 Ze=-81.555 Az status=0009 Ze status=0009 12:23:15 Check angles 12:23:15 SkyScan query 12:23:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.945<-18863 Statuses=0008 0009 12:23:16 Msec=750 True Az=112.995 Ze=-102.945 Az status=0008 Ze status=0009 12:23:16 Check angles 12:23:16 SkyScan query 12:23:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.9<-20260 Statuses=0008 0009 12:23:17 Msec=1500 True Az=112.995 Ze=-123.9 Az status=0008 Ze status=0009 12:23:17 Check angles 12:23:17 SkyScan query 12:23:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.84<-21656 Statuses=0008 0009 12:23:17 Msec=2250 True Az=112.995 Ze=-144.84 Az status=0008 Ze status=0009 12:23:17 Check angles 12:23:17 SkyScan query 12:23:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.26<-23084 Statuses=0008 0009 12:23:18 Msec=3000 True Az=112.995 Ze=-166.26 Az status=0008 Ze status=0009 12:23:18 Check angles 12:23:18 SkyScan query 12:23:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:23:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:23:19 Message to Master queued w/err=0: serial=64622 error=0 12:23:24 Received message from Master: op=Filter serial=64623 12:23:24 Color wheel filter change from 0 to 0 12:23:24 FLIGetFilterPos err=0 currentPosition=0 12:23:24 FLIGetStepsRemaining err=0 RemainingSteps=0 12:23:24 Filter is already there-color wheel unchanged 12:23:24 Received message from Master: op=Shutter serial=64624 12:23:24 Shutter LASER open 12:23:24 Received message from Camera: op=State serial=64626 12:23:24 GetSingleValue result=40 Value=cccccccc 12:23:24 SkyScan query 12:23:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:23:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:25 Parameters OK 12:23:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:25 Set A/D data flow result=40 12:23:25 Set A/D channel type result=40 12:23:25 Set A/D encoding result=40 12:23:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:25 Set channel filter=0.000000e+000 result=40 12:23:25 Config A/D Result=40 12:23:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:25 Get A/D filter: -9.255963e+061 result=40 12:23:25 Get A/D value=-858993460 result=40 12:23:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:25 Parameters OK 12:23:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:25 Set A/D data flow result=40 12:23:25 Set A/D channel type result=40 12:23:25 Set A/D encoding result=40 12:23:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:25 Set channel filter=0.000000e+000 result=40 12:23:25 Config A/D Result=40 12:23:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:25 Get A/D filter: -9.255963e+061 result=40 12:23:25 Get A/D value=-858993460 result=40 12:23:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:23:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:23:25 Aux= 12:23:25 Message to Camera, serial 64626 queued 12:23:33 Received message from Master: op=Shutter serial=64636 12:23:33 Shutter LASER close 12:23:34 Received message from Master: op=PointingHead serial=64640 12:23:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:23:34 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:23:34 Point started: ret=0 12:23:34 point_skyscan result=0 12:23:35 Check angles 12:23:35 SkyScan query 12:23:35 SkyScan query done: ret=0 az=89.895<-5993 ze=157.335<-1511 Statuses=0009 0009 12:23:35 Msec=0 True Az=89.895 Ze=157.335 Az status=0009 Ze status=0009 12:23:35 Check angles 12:23:35 SkyScan query 12:23:36 SkyScan query done: ret=0 az=72.045<-4803 ze=135.9<-2940 Statuses=0009 0009 12:23:36 Msec=750 True Az=72.045 Ze=135.9 Az status=0009 Ze status=0009 12:23:36 Check angles 12:23:36 SkyScan query 12:23:37 SkyScan query done: ret=0 az=54.81<-3654 ze=114.99<-4334 Statuses=0009 0009 12:23:37 Msec=1500 True Az=54.81 Ze=114.99 Az status=0009 Ze status=0009 12:23:37 Check angles 12:23:37 SkyScan query 12:23:38 SkyScan query done: ret=0 az=40.89<-2726 ze=93.975<-5735 Statuses=0009 0009 12:23:38 Msec=2250 True Az=40.89 Ze=93.975 Az status=0009 Ze status=0009 12:23:38 Check angles 12:23:38 SkyScan query 12:23:38 SkyScan query done: ret=0 az=40.995<-2733 ze=73.05<-7130 Statuses=0008 0009 12:23:38 Msec=3000 True Az=40.995 Ze=73.05 Az status=0008 Ze status=0009 12:23:38 Check angles 12:23:38 SkyScan query 12:23:39 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 12:23:39 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 12:23:39 Check angles 12:23:39 SkyScan query 12:23:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:23:40 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:23:40 Message to Master queued w/err=0: serial=64640 error=0 12:23:45 Received message from Master: op=Filter serial=64641 12:23:45 Color wheel filter change from 0 to 0 12:23:45 FLIGetFilterPos err=0 currentPosition=0 12:23:45 FLIGetStepsRemaining err=0 RemainingSteps=0 12:23:45 Filter is already there-color wheel unchanged 12:23:45 Received message from Master: op=Shutter serial=64642 12:23:45 Shutter LASER close 12:23:45 Received message from Camera: op=State serial=64644 12:23:45 GetSingleValue result=40 Value=cccccccc 12:23:45 SkyScan query 12:23:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:23:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:46 Parameters OK 12:23:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:46 Set A/D data flow result=40 12:23:46 Set A/D channel type result=40 12:23:46 Set A/D encoding result=40 12:23:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:46 Set channel filter=0.000000e+000 result=40 12:23:46 Config A/D Result=40 12:23:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:46 Get A/D filter: -9.255963e+061 result=40 12:23:46 Get A/D value=-858993460 result=40 12:23:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:46 Parameters OK 12:23:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:46 Set A/D data flow result=40 12:23:46 Set A/D channel type result=40 12:23:46 Set A/D encoding result=40 12:23:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:46 Set channel filter=0.000000e+000 result=40 12:23:46 Config A/D Result=40 12:23:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:46 Get A/D filter: -9.255963e+061 result=40 12:23:46 Get A/D value=-858993460 result=40 12:23:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:23:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:23:46 Aux= 12:23:46 Message to Camera, serial 64644 queued 12:24:23 Received message from Master: op=PointingHead serial=64657 12:24:23 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:24:23 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:24:23 Point started: ret=0 12:24:23 point_skyscan result=0 12:24:24 Check angles 12:24:24 SkyScan query 12:24:24 SkyScan query done: ret=0 az=64.035<-4269 ze=66.555<-7563 Statuses=0009 0008 12:24:24 Msec=0 True Az=64.035 Ze=66.555 Az status=0009 Ze status=0008 12:24:24 Check angles 12:24:24 SkyScan query 12:24:25 SkyScan query done: ret=0 az=81.66<-5444 ze=66.495<-7567 Statuses=0009 0008 12:24:25 Msec=750 True Az=81.66 Ze=66.495 Az status=0009 Ze status=0008 12:24:25 Check angles 12:24:25 SkyScan query 12:24:26 SkyScan query done: ret=0 az=99.3<-6620 ze=66.495<-7567 Statuses=0009 0008 12:24:26 Msec=1500 True Az=99.3 Ze=66.495 Az status=0009 Ze status=0008 12:24:26 Check angles 12:24:26 SkyScan query 12:24:26 SkyScan query done: ret=0 az=116.79<-7786 ze=66.495<-7567 Statuses=0009 0008 12:24:26 Msec=2250 True Az=116.79 Ze=66.495 Az status=0009 Ze status=0008 12:24:27 Check angles 12:24:27 SkyScan query 12:24:27 SkyScan query done: ret=0 az=134.61<-8974 ze=66.495<-7567 Statuses=0009 0008 12:24:27 Msec=3000 True Az=134.61 Ze=66.495 Az status=0009 Ze status=0008 12:24:27 Check angles 12:24:27 SkyScan query 12:24:28 SkyScan query done: ret=0 az=152.52<-10168 ze=66.495<-7567 Statuses=0009 0008 12:24:28 Msec=3750 True Az=152.52 Ze=66.495 Az status=0009 Ze status=0008 12:24:28 Check angles 12:24:28 SkyScan query 12:24:29 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 12:24:29 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 12:24:29 Message to Master queued w/err=0: serial=64657 error=0 12:24:34 Received message from Master: op=Filter serial=64658 12:24:34 Color wheel filter change from 0 to 0 12:24:34 FLIGetFilterPos err=0 currentPosition=0 12:24:34 FLIGetStepsRemaining err=0 RemainingSteps=0 12:24:34 Filter is already there-color wheel unchanged 12:24:34 Received message from Master: op=Shutter serial=64659 12:24:34 Shutter LASER close 12:24:34 Received message from Camera: op=State serial=64661 12:24:34 GetSingleValue result=40 Value=cccccccc 12:24:34 SkyScan query 12:24:35 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:24:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:35 Parameters OK 12:24:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:35 Set A/D data flow result=40 12:24:35 Set A/D channel type result=40 12:24:35 Set A/D encoding result=40 12:24:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:35 Set channel filter=0.000000e+000 result=40 12:24:35 Config A/D Result=40 12:24:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:35 Get A/D filter: -9.255963e+061 result=40 12:24:35 Get A/D value=-858993460 result=40 12:24:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:35 Parameters OK 12:24:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:35 Set A/D data flow result=40 12:24:35 Set A/D channel type result=40 12:24:35 Set A/D encoding result=40 12:24:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:35 Set channel filter=0.000000e+000 result=40 12:24:35 Config A/D Result=40 12:24:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:35 Get A/D filter: -9.255963e+061 result=40 12:24:35 Get A/D value=-858993460 result=40 12:24:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:35 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:24:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:24:35 Aux= 12:24:35 Message to Camera, serial 64661 queued 12:25:11 Received message from Master: op=PointingHead serial=64674 12:25:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:25:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:25:12 Point started: ret=0 12:25:12 point_skyscan result=0 12:25:12 Check angles 12:25:12 SkyScan query 12:25:13 SkyScan query done: ret=0 az=134.61<-8974 ze=36.285<-9581 Statuses=0009 0009 12:25:13 Msec=0 True Az=134.61 Ze=36.285 Az status=0009 Ze status=0009 12:25:13 Check angles 12:25:13 SkyScan query 12:25:14 SkyScan query done: ret=0 az=117.09<-7806 ze=15.375<-10975 Statuses=0009 0009 12:25:14 Msec=750 True Az=117.09 Ze=15.375 Az status=0009 Ze status=0009 12:25:14 Check angles 12:25:14 SkyScan query 12:25:15 SkyScan query done: ret=0 az=99.36<-6624 ze=-6.06<-12404 Statuses=0009 0009 12:25:15 Msec=1500 True Az=99.36 Ze=-6.06 Az status=0009 Ze status=0009 12:25:15 Check angles 12:25:15 SkyScan query 12:25:15 SkyScan query done: ret=0 az=81.915<-5461 ze=-27.045<-13803 Statuses=0009 0009 12:25:15 Msec=2250 True Az=81.915 Ze=-27.045 Az status=0009 Ze status=0009 12:25:16 Check angles 12:25:16 SkyScan query 12:25:16 SkyScan query done: ret=0 az=64.395<-4293 ze=-38.565<-14571 Statuses=0009 0008 12:25:16 Msec=3000 True Az=64.395 Ze=-38.565 Az status=0009 Ze status=0008 12:25:16 Check angles 12:25:16 SkyScan query 12:25:17 SkyScan query done: ret=0 az=46.95<-3130 ze=-38.535<-14569 Statuses=0009 0008 12:25:17 Msec=3750 True Az=46.95 Ze=-38.535 Az status=0009 Ze status=0008 12:25:17 Check angles 12:25:17 SkyScan query 12:25:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:25:18 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:25:18 Message to Master queued w/err=0: serial=64674 error=0 12:25:23 Received message from Master: op=Filter serial=64675 12:25:23 Color wheel filter change from 0 to 0 12:25:23 FLIGetFilterPos err=0 currentPosition=0 12:25:23 FLIGetStepsRemaining err=0 RemainingSteps=0 12:25:23 Filter is already there-color wheel unchanged 12:25:23 Received message from Master: op=Shutter serial=64676 12:25:23 Shutter LASER close 12:25:23 Received message from Camera: op=State serial=64678 12:25:23 GetSingleValue result=40 Value=cccccccc 12:25:23 SkyScan query 12:25:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:25:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:23 Parameters OK 12:25:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:23 Set A/D data flow result=40 12:25:23 Set A/D channel type result=40 12:25:23 Set A/D encoding result=40 12:25:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:23 Set channel filter=0.000000e+000 result=40 12:25:23 Config A/D Result=40 12:25:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:23 Get A/D filter: -9.255963e+061 result=40 12:25:23 Get A/D value=-858993460 result=40 12:25:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:23 Parameters OK 12:25:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:23 Set A/D data flow result=40 12:25:23 Set A/D channel type result=40 12:25:23 Set A/D encoding result=40 12:25:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:23 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-11 12:25:23] 12:25:23 Config A/D Result=40 12:25:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:23 Get A/D filter: -9.255963e+061 result=40 12:25:23 Get A/D value=-858993460 result=40 12:25:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:25:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:25:23 Aux= 12:25:23 Message to Camera, serial 64678 queued 12:26:00 Received message from Master: op=PointingHead serial=64691 12:26:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:26:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:26:01 Point started: ret=0 12:26:01 point_skyscan result=0 12:26:01 Check angles 12:26:01 SkyScan query 12:26:02 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.115<-16541 Statuses=0009 0009 12:26:02 Msec=0 True Az=63.825 Ze=-68.115 Az status=0009 Ze status=0009 12:26:02 Check angles 12:26:02 SkyScan query 12:26:03 SkyScan query done: ret=0 az=81.18<-5412 ze=-89.1<-17940 Statuses=0009 0009 12:26:03 Msec=750 True Az=81.18 Ze=-89.1 Az status=0009 Ze status=0009 12:26:03 Check angles 12:26:03 SkyScan query 12:26:03 SkyScan query done: ret=0 az=99.15<-6610 ze=-110.52<-19368 Statuses=0009 0009 12:26:03 Msec=1500 True Az=99.15 Ze=-110.52 Az status=0009 Ze status=0009 12:26:04 Check angles 12:26:04 SkyScan query 12:26:04 SkyScan query done: ret=0 az=116.745<-7783 ze=-131.445<-20763 Statuses=0009 0009 12:26:04 Msec=2250 True Az=116.745 Ze=-131.445 Az status=0009 Ze status=0009 12:26:04 Check angles 12:26:04 SkyScan query 12:26:05 SkyScan query done: ret=0 az=131.19<-8746 ze=-141.54<-21436 Statuses=0009 0008 12:26:05 Msec=3000 True Az=131.19 Ze=-141.54 Az status=0009 Ze status=0008 12:26:05 Check angles 12:26:05 SkyScan query 12:26:06 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:26:06 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:26:06 Message to Master queued w/err=0: serial=64691 error=0 12:26:11 Received message from Master: op=Filter serial=64692 12:26:11 Color wheel filter change from 0 to 0 12:26:11 FLIGetFilterPos err=0 currentPosition=0 12:26:11 FLIGetStepsRemaining err=0 RemainingSteps=0 12:26:11 Filter is already there-color wheel unchanged 12:26:11 Received message from Master: op=Shutter serial=64693 12:26:11 Shutter LASER close 12:26:11 Received message from Camera: op=State serial=64695 12:26:11 GetSingleValue result=40 Value=cccccccc 12:26:11 SkyScan query 12:26:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:26:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:11 Parameters OK 12:26:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:11 Set A/D data flow result=40 12:26:11 Set A/D channel type result=40 12:26:11 Set A/D encoding result=40 12:26:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:11 Set channel filter=0.000000e+000 result=40 12:26:11 Config A/D Result=40 12:26:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:11 Get A/D filter: -9.255963e+061 result=40 12:26:11 Get A/D value=-858993460 result=40 12:26:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:11 Parameters OK 12:26:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:11 Set A/D data flow result=40 12:26:11 Set A/D channel type result=40 12:26:11 Set A/D encoding result=40 12:26:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:11 Set channel filter=0.000000e+000 result=40 12:26:11 Config A/D Result=40 12:26:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:11 Get A/D filter: -9.255963e+061 result=40 12:26:11 Get A/D value=-858993460 result=40 12:26:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:26:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:26:11 Aux= 12:26:11 Message to Camera, serial 64695 queued 12:26:47 Received message from Master: op=PointingHead serial=64707 12:26:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:26:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:26:48 Point started: ret=0 12:26:48 point_skyscan result=0 12:26:48 Check angles 12:26:48 SkyScan query 12:26:49 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.15<-23410 Statuses=0009 0009 12:26:49 Msec=0 True Az=113.01 Ze=-171.15 Az status=0009 Ze status=0009 12:26:49 Check angles 12:26:49 SkyScan query 12:26:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:26:50 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:26:50 Message to Master queued w/err=0: serial=64707 error=0 12:26:55 Received message from Master: op=Filter serial=64708 12:26:55 Color wheel filter change from 0 to 0 12:26:55 FLIGetFilterPos err=0 currentPosition=0 12:26:55 FLIGetStepsRemaining err=0 RemainingSteps=0 12:26:55 Filter is already there-color wheel unchanged 12:26:55 Received message from Master: op=Shutter serial=64709 12:26:55 Shutter LASER open 12:26:55 Received message from Camera: op=State serial=64711 12:26:55 GetSingleValue result=40 Value=cccccccc 12:26:55 SkyScan query 12:26:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:26:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:56 Parameters OK 12:26:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:56 Set A/D data flow result=40 12:26:56 Set A/D channel type result=40 12:26:56 Set A/D encoding result=40 12:26:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:56 Set channel filter=0.000000e+000 result=40 12:26:56 Config A/D Result=40 12:26:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:56 Get A/D filter: -9.255963e+061 result=40 12:26:56 Get A/D value=-858993460 result=40 12:26:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:56 Parameters OK 12:26:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:56 Set A/D data flow result=40 12:26:56 Set A/D channel type result=40 12:26:56 Set A/D encoding result=40 12:26:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:56 Set channel filter=0.000000e+000 result=40 12:26:56 Config A/D Result=40 12:26:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:56 Get A/D filter: -9.255963e+061 result=40 12:26:56 Get A/D value=-858993460 result=40 12:26:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:26:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:26:56 Aux= 12:26:56 Message to Camera, serial 64711 queued 12:27:04 Received message from Master: op=Shutter serial=64721 12:27:04 Shutter LASER close 12:27:05 Received message from Master: op=PointingHead serial=64725 12:27:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:27:05 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:27:05 Point started: ret=0 12:27:05 point_skyscan result=0 12:27:06 Check angles 12:27:06 SkyScan query 12:27:06 SkyScan query done: ret=0 az=136.005<-9067 ze=-143.19<-21546 Statuses=0009 0009 12:27:06 Msec=0 True Az=136.005 Ze=-143.19 Az status=0009 Ze status=0009 12:27:07 Check angles 12:27:07 SkyScan query 12:27:07 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.22<-20148 Statuses=0009 0009 12:27:07 Msec=750 True Az=153.57 Ze=-122.22 Az status=0009 Ze status=0009 12:27:07 Check angles 12:27:07 SkyScan query 12:27:08 SkyScan query done: ret=0 az=171.42<-11428 ze=-100.8<-18720 Statuses=0009 0009 12:27:08 Msec=1500 True Az=171.42 Ze=-100.8 Az status=0009 Ze status=0009 12:27:08 Check angles 12:27:08 SkyScan query 12:27:09 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.44<-17296 Statuses=0008 0009 12:27:09 Msec=2250 True Az=176.025 Ze=-79.44 Az status=0008 Ze status=0009 12:27:09 Check angles 12:27:09 SkyScan query 12:27:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.455<-15897 Statuses=0008 0009 12:27:09 Msec=3000 True Az=175.995 Ze=-58.455 Az status=0008 Ze status=0009 12:27:10 Check angles 12:27:10 SkyScan query 12:27:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 12:27:10 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 12:27:10 Message to Master queued w/err=0: serial=64725 error=0 12:27:15 Received message from Master: op=Filter serial=64726 12:27:15 Color wheel filter change from 0 to 0 12:27:15 FLIGetFilterPos err=0 currentPosition=0 12:27:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:27:15 Filter is already there-color wheel unchanged 12:27:15 Received message from Master: op=Shutter serial=64727 12:27:15 Shutter LASER close 12:27:16 Received message from Camera: op=State serial=64729 12:27:16 GetSingleValue result=40 Value=cccccccc 12:27:16 SkyScan query 12:27:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:27:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:16 Parameters OK 12:27:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:16 Set A/D data flow result=40 12:27:16 Set A/D channel type result=40 12:27:16 Set A/D encoding result=40 12:27:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:16 Set channel filter=0.000000e+000 result=40 12:27:16 Config A/D Result=40 12:27:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:16 Get A/D filter: -9.255963e+061 result=40 12:27:16 Get A/D value=-858993460 result=40 12:27:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:16 Parameters OK 12:27:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:16 Set A/D data flow result=40 12:27:16 Set A/D channel type result=40 12:27:16 Set A/D encoding result=40 12:27:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:16 Set channel filter=0.000000e+000 result=40 12:27:16 Config A/D Result=40 12:27:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:16 Get A/D filter: -9.255963e+061 result=40 12:27:16 Get A/D value=-858993460 result=40 12:27:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:27:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:27:16 Aux= 12:27:16 Message to Camera, serial 64729 queued 12:27:53 Received message from Master: op=PointingHead serial=64742 12:27:53 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:27:53 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:27:53 Point started: ret=0 12:27:53 point_skyscan result=0 12:27:54 Check angles 12:27:54 SkyScan query 12:27:55 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.87<-13458 Statuses=0009 0009 12:27:55 Msec=0 True Az=152.925 Ze=-21.87 Az status=0009 Ze status=0009 12:27:55 Check angles 12:27:55 SkyScan query 12:27:55 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.81<-12054 Statuses=0009 0009 12:27:55 Msec=750 True Az=135.45 Ze=-0.81 Az status=0009 Ze status=0009 12:27:56 Check angles 12:27:56 SkyScan query 12:27:56 SkyScan query done: ret=0 az=117.51<-7834 ze=20.505<-10633 Statuses=0009 0009 12:27:56 Msec=1500 True Az=117.51 Ze=20.505 Az status=0009 Ze status=0009 12:27:56 Check angles 12:27:56 SkyScan query 12:27:57 SkyScan query done: ret=0 az=100.125<-6675 ze=41.475<-9235 Statuses=0009 0009 12:27:57 Msec=2250 True Az=100.125 Ze=41.475 Az status=0009 Ze status=0009 12:27:57 Check angles 12:27:57 SkyScan query 12:27:58 SkyScan query done: ret=0 az=86.055<-5737 ze=51.54<-8564 Statuses=0009 0008 12:27:58 Msec=3000 True Az=86.055 Ze=51.54 Az status=0009 Ze status=0008 12:27:58 Check angles 12:27:58 SkyScan query 12:27:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:27:58 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:27:58 Message to Master queued w/err=0: serial=64742 error=0 12:28:03 Received message from Master: op=Filter serial=64743 12:28:03 Color wheel filter change from 0 to 0 12:28:03 FLIGetFilterPos err=0 currentPosition=0 12:28:03 FLIGetStepsRemaining err=0 RemainingSteps=0 12:28:03 Filter is already there-color wheel unchanged 12:28:04 Received message from Master: op=Shutter serial=64744 12:28:04 Shutter LASER close 12:28:04 Received message from Camera: op=State serial=64746 12:28:04 GetSingleValue result=40 Value=cccccccc 12:28:04 SkyScan query 12:28:04 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:28:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:04 Parameters OK 12:28:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:04 Set A/D data flow result=40 12:28:04 Set A/D channel type result=40 12:28:04 Set A/D encoding result=40 12:28:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:04 Set channel filter=0.000000e+000 result=40 12:28:04 Config A/D Result=40 12:28:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:04 Get A/D filter: -9.255963e+061 result=40 12:28:04 Get A/D value=-858993460 result=40 12:28:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:04 Parameters OK 12:28:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:04 Set A/D data flow result=40 12:28:04 Set A/D channel type result=40 12:28:04 Set A/D encoding result=40 12:28:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:04 Set channel filter=0.000000e+000 result=40 12:28:04 Config A/D Result=40 12:28:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:04 Get A/D filter: -9.255963e+061 result=40 12:28:04 Get A/D value=-858993460 result=40 12:28:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:04 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:28:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:28:04 Aux= 12:28:04 Message to Camera, serial 64746 queued 12:28:41 Received message from Master: op=PointingHead serial=64759 12:28:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:28:41 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:28:41 Point started: ret=0 12:28:41 point_skyscan result=0 12:28:42 Check angles 12:28:42 SkyScan query 12:28:43 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 12:28:43 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 12:28:43 Check angles 12:28:43 SkyScan query 12:28:43 SkyScan query done: ret=0 az=126.765<-8451 ze=38.505<-9433 Statuses=0009 0008 12:28:43 Msec=750 True Az=126.765 Ze=38.505 Az status=0009 Ze status=0008 12:28:44 Check angles 12:28:44 SkyScan query 12:28:44 SkyScan query done: ret=0 az=144.48<-9632 ze=38.505<-9433 Statuses=0009 0008 12:28:44 Msec=1500 True Az=144.48 Ze=38.505 Az status=0009 Ze status=0008 12:28:44 Check angles 12:28:44 SkyScan query 12:28:45 SkyScan query done: ret=0 az=161.895<-10793 ze=38.505<-9433 Statuses=0009 0008 12:28:45 Msec=2250 True Az=161.895 Ze=38.505 Az status=0009 Ze status=0008 12:28:45 Check angles 12:28:45 SkyScan query 12:28:46 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 12:28:46 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 12:28:46 Check angles 12:28:46 SkyScan query 12:28:47 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:28:47 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:28:47 Message to Master queued w/err=0: serial=64759 error=0 12:28:52 Received message from Master: op=Filter serial=64760 12:28:52 Color wheel filter change from 0 to 0 12:28:52 FLIGetFilterPos err=0 currentPosition=0 12:28:52 FLIGetStepsRemaining err=0 RemainingSteps=0 12:28:52 Filter is already there-color wheel unchanged 12:28:52 Received message from Master: op=Shutter serial=64761 12:28:52 Shutter LASER close 12:28:52 Received message from Camera: op=State serial=64763 12:28:52 GetSingleValue result=40 Value=cccccccc 12:28:52 SkyScan query 12:28:52 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:28:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:52 Parameters OK 12:28:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:52 Set A/D data flow result=40 12:28:52 Set A/D channel type result=40 12:28:52 Set A/D encoding result=40 12:28:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:52 Set channel filter=0.000000e+000 result=40 12:28:52 Config A/D Result=40 12:28:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:52 Get A/D filter: -9.255963e+061 result=40 12:28:52 Get A/D value=-858993460 result=40 12:28:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:52 Parameters OK 12:28:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:52 Set A/D data flow result=40 12:28:52 Set A/D channel type result=40 12:28:52 Set A/D encoding result=40 12:28:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:52 Set channel filter=0.000000e+000 result=40 12:28:52 Config A/D Result=40 12:28:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:52 Get A/D filter: -9.255963e+061 result=40 12:28:52 Get A/D value=-858993460 result=40 12:28:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:28:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:28:52 Aux= 12:28:52 Message to Camera, serial 64763 queued 12:29:29 Received message from Master: op=PointingHead serial=64776 12:29:29 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:29:29 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:29:29 Point started: ret=0 12:29:29 point_skyscan result=0 12:29:30 Check angles 12:29:30 SkyScan query 12:29:31 SkyScan query done: ret=0 az=152.775<-10185 ze=8.49<-11434 Statuses=0009 0009 12:29:31 Msec=0 True Az=152.775 Ze=8.49 Az status=0009 Ze status=0009 12:29:31 Check angles 12:29:31 SkyScan query 12:29:32 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.435<-12829 Statuses=0009 0009 12:29:32 Msec=750 True Az=135.435 Ze=-12.435 Az status=0009 Ze status=0009 12:29:32 Check angles 12:29:32 SkyScan query 12:29:32 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.375<-14225 Statuses=0009 0009 12:29:32 Msec=1500 True Az=117.765 Ze=-33.375 Az status=0009 Ze status=0009 12:29:33 Check angles 12:29:33 SkyScan query 12:29:33 SkyScan query done: ret=0 az=100.065<-6671 ze=-51.57<-15438 Statuses=0009 0009 12:29:33 Msec=2250 True Az=100.065 Ze=-51.57 Az status=0009 Ze status=0009 12:29:33 Check angles 12:29:33 SkyScan query 12:29:34 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 12:29:34 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 12:29:34 Check angles 12:29:34 SkyScan query 12:29:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:29:35 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:29:35 Message to Master queued w/err=0: serial=64776 error=0 12:29:40 Received message from Master: op=Filter serial=64777 12:29:40 Color wheel filter change from 0 to 0 12:29:40 FLIGetFilterPos err=0 currentPosition=0 12:29:40 FLIGetStepsRemaining err=0 RemainingSteps=0 12:29:40 Filter is already there-color wheel unchanged 12:29:40 Received message from Master: op=Shutter serial=64778 12:29:40 Shutter LASER close 12:29:40 Received message from Camera: op=State serial=64780 12:29:40 GetSingleValue result=40 Value=cccccccc 12:29:40 SkyScan query 12:29:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:29:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:40 Parameters OK 12:29:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:40 Set A/D data flow result=40 12:29:40 Set A/D channel type result=40 12:29:40 Set A/D encoding result=40 12:29:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:40 Set channel filter=0.000000e+000 result=40 12:29:40 Config A/D Result=40 12:29:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:40 Get A/D filter: -9.255963e+061 result=40 12:29:40 Get A/D value=-858993460 result=40 12:29:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:40 Parameters OK 12:29:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:40 Set A/D data flow result=40 12:29:40 Set A/D channel type result=40 12:29:40 Set A/D encoding result=40 12:29:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:40 Set channel filter=0.000000e+000 result=40 12:29:40 Config A/D Result=40 12:29:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:40 Get A/D filter: -9.255963e+061 result=40 12:29:40 Get A/D value=-858993460 result=40 12:29:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:29:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:29:40 Aux= 12:29:40 Message to Camera, serial 64780 queued 12:30:17 Received message from Master: op=PointingHead serial=64793 12:30:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:30:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:30:18 Point started: ret=0 12:30:18 point_skyscan result=0 12:30:18 Check angles 12:30:18 SkyScan query 12:30:19 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.225<-17415 Statuses=0009 0009 12:30:19 Msec=0 True Az=108.93 Ze=-81.225 Az status=0009 Ze status=0009 12:30:19 Check angles 12:30:19 SkyScan query 12:30:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.645<-18843 Statuses=0008 0009 12:30:20 Msec=750 True Az=112.995 Ze=-102.645 Az status=0008 Ze status=0009 12:30:20 Check angles 12:30:20 SkyScan query 12:30:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.585<-20239 Statuses=0008 0009 12:30:20 Msec=1500 True Az=112.995 Ze=-123.585 Az status=0008 Ze status=0009 12:30:21 Check angles 12:30:21 SkyScan query 12:30:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.54<-21636 Statuses=0008 0009 12:30:21 Msec=2250 True Az=112.995 Ze=-144.54 Az status=0008 Ze status=0009 12:30:21 Check angles 12:30:21 SkyScan query 12:30:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.465<-23031 Statuses=0008 0009 12:30:22 Msec=3000 True Az=112.995 Ze=-165.465 Az status=0008 Ze status=0009 12:30:22 Check angles 12:30:22 SkyScan query 12:30:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:30:23 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:30:23 Message to Master queued w/err=0: serial=64793 error=0 12:30:28 Received message from Master: op=Filter serial=64794 12:30:28 Color wheel filter change from 0 to 0 12:30:28 FLIGetFilterPos err=0 currentPosition=0 12:30:28 FLIGetStepsRemaining err=0 RemainingSteps=0 12:30:28 Filter is already there-color wheel unchanged 12:30:28 Received message from Master: op=Shutter serial=64795 12:30:28 Shutter LASER open 12:30:28 Received message from Camera: op=State serial=64797 12:30:28 GetSingleValue result=40 Value=cccccccc 12:30:28 SkyScan query 12:30:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:30:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:29 Parameters OK 12:30:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:29 Set A/D data flow result=40 12:30:29 Set A/D channel type result=40 12:30:29 Set A/D encoding result=40 12:30:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:29 Set channel filter=0.000000e+000 result=40 12:30:29 Config A/D Result=40 12:30:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:29 Get A/D filter: -9.255963e+061 result=40 12:30:29 Get A/D value=-858993460 result=40 12:30:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:29 Parameters OK 12:30:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:29 Set A/D data flow result=40 12:30:29 Set A/D channel type result=40 12:30:29 Set A/D encoding result=40 12:30:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:29 Set channel filter=0.000000e+000 result=40 12:30:29 Config A/D Result=40 12:30:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:29 Get A/D filter: -9.255963e+061 result=40 12:30:29 Get A/D value=-858993460 result=40 12:30:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:30:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:30:29 Aux= 12:30:29 Message to Camera, serial 64797 queued 12:30:37 Received message from Master: op=Shutter serial=64807 12:30:37 Shutter LASER close 12:30:38 Received message from Master: op=PointingHead serial=64811 12:30:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:30:38 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:30:38 Point started: ret=0 12:30:38 point_skyscan result=0 12:30:39 Check angles 12:30:39 SkyScan query 12:30:39 SkyScan query done: ret=0 az=90.18<-6012 ze=157.545<-1497 Statuses=0009 0009 12:30:39 Msec=0 True Az=90.18 Ze=157.545 Az status=0009 Ze status=0009 12:30:39 Check angles 12:30:39 SkyScan query 12:30:40 SkyScan query done: ret=0 az=72.735<-4849 ze=136.545<-2897 Statuses=0009 0009 12:30:40 Msec=750 True Az=72.735 Ze=136.545 Az status=0009 Ze status=0009 12:30:40 Check angles 12:30:40 SkyScan query 12:30:41 SkyScan query done: ret=0 az=55.215<-3681 ze=115.635<-4291 Statuses=0009 0009 12:30:41 Msec=1500 True Az=55.215 Ze=115.635 Az status=0009 Ze status=0009 12:30:41 Check angles 12:30:41 SkyScan query 12:30:41 SkyScan query done: ret=0 az=40.86<-2724 ze=94.65<-5690 Statuses=0009 0009 12:30:41 Msec=2250 True Az=40.86 Ze=94.65 Az status=0009 Ze status=0009 12:30:42 Check angles 12:30:42 SkyScan query 12:30:42 SkyScan query done: ret=0 az=40.995<-2733 ze=73.725<-7085 Statuses=0008 0009 12:30:42 Msec=3000 True Az=40.995 Ze=73.725 Az status=0008 Ze status=0009 12:30:42 Check angles 12:30:42 SkyScan query 12:30:43 SkyScan query done: ret=0 az=40.995<-2733 ze=53.04<-8464 Statuses=0008 0009 12:30:43 Msec=3750 True Az=40.995 Ze=53.04 Az status=0008 Ze status=0009 12:30:43 Check angles 12:30:43 SkyScan query 12:30:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:30:44 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:30:44 Message to Master queued w/err=0: serial=64811 error=0 12:30:49 Received message from Master: op=Filter serial=64812 12:30:49 Color wheel filter change from 0 to 0 12:30:49 FLIGetFilterPos err=0 currentPosition=0 12:30:49 FLIGetStepsRemaining err=0 RemainingSteps=0 12:30:49 Filter is already there-color wheel unchanged 12:30:49 Received message from Master: op=Shutter serial=64813 12:30:49 Shutter LASER close 12:30:49 Received message from Camera: op=State serial=64815 12:30:49 GetSingleValue result=40 Value=cccccccc 12:30:49 SkyScan query 12:30:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:30:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:50 Parameters OK 12:30:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:50 Set A/D data flow result=40 12:30:50 Set A/D channel type result=40 12:30:50 Set A/D encoding result=40 12:30:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:50 Set channel filter=0.000000e+000 result=40 12:30:50 Config A/D Result=40 12:30:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:50 Get A/D filter: -9.255963e+061 result=40 12:30:50 Get A/D value=-858993460 result=40 12:30:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:50 Parameters OK 12:30:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:50 Set A/D data flow result=40 12:30:50 Set A/D channel type result=40 12:30:50 Set A/D encoding result=40 12:30:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:50 Set channel filter=0.000000e+000 result=40 12:30:50 Config A/D Result=40 12:30:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:50 Get A/D filter: -9.255963e+061 result=40 12:30:50 Get A/D value=-858993460 result=40 12:30:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:30:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:30:50 Aux= 12:30:50 Message to Camera, serial 64815 queued 12:31:26 Received message from Master: op=PointingHead serial=64828 12:31:26 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:31:26 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:31:27 Point started: ret=0 12:31:27 point_skyscan result=0 12:31:28 Check angles 12:31:28 SkyScan query 12:31:28 SkyScan query done: ret=0 az=63.945<-4263 ze=66.555<-7563 Statuses=0009 0008 12:31:28 Msec=0 True Az=63.945 Ze=66.555 Az status=0009 Ze status=0008 12:31:28 Check angles 12:31:28 SkyScan query 12:31:29 SkyScan query done: ret=0 az=81.3<-5420 ze=66.495<-7567 Statuses=0009 0008 12:31:29 Msec=750 True Az=81.3 Ze=66.495 Az status=0009 Ze status=0008 12:31:29 Check angles 12:31:29 SkyScan query 12:31:30 SkyScan query done: ret=0 az=99.405<-6627 ze=66.495<-7567 Statuses=0009 0008 12:31:30 Msec=1500 True Az=99.405 Ze=66.495 Az status=0009 Ze status=0008 12:31:30 Check angles 12:31:30 SkyScan query 12:31:30 SkyScan query done: ret=0 az=116.76<-7784 ze=66.495<-7567 Statuses=0009 0008 12:31:30 Msec=2250 True Az=116.76 Ze=66.495 Az status=0009 Ze status=0008 12:31:31 Check angles 12:31:31 SkyScan query 12:31:31 SkyScan query done: ret=0 az=134.31<-8954 ze=66.495<-7567 Statuses=0009 0008 12:31:31 Msec=3000 True Az=134.31 Ze=66.495 Az status=0009 Ze status=0008 12:31:31 Check angles 12:31:31 SkyScan query 12:31:32 SkyScan query done: ret=0 az=151.635<-10109 ze=66.495<-7567 Statuses=0009 0008 12:31:32 Msec=3750 True Az=151.635 Ze=66.495 Az status=0009 Ze status=0008 12:31:32 Check angles 12:31:32 SkyScan query 12:31:33 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:31:33 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 12:31:33 Message to Master queued w/err=0: serial=64828 error=0 12:31:38 Received message from Master: op=Filter serial=64829 12:31:38 Color wheel filter change from 0 to 0 12:31:38 FLIGetFilterPos err=0 currentPosition=0 12:31:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:31:38 Filter is already there-color wheel unchanged 12:31:38 Received message from Master: op=Shutter serial=64830 12:31:38 Shutter LASER close 12:31:38 Received message from Camera: op=State serial=64832 12:31:38 GetSingleValue result=40 Value=cccccccc 12:31:38 SkyScan query 12:31:38 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:31:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:38 Parameters OK 12:31:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:38 Set A/D data flow result=40 12:31:38 Set A/D channel type result=40 12:31:38 Set A/D encoding result=40 12:31:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:38 Set channel filter=0.000000e+000 result=40 12:31:38 Config A/D Result=40 12:31:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:38 Get A/D filter: -9.255963e+061 result=40 12:31:38 Get A/D value=-858993460 result=40 12:31:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:38 Parameters OK 12:31:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:38 Set A/D data flow result=40 12:31:38 Set A/D channel type result=40 12:31:38 Set A/D encoding result=40 12:31:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:38 Set channel filter=0.000000e+000 result=40 12:31:38 Config A/D Result=40 12:31:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:38 Get A/D filter: -9.255963e+061 result=40 12:31:38 Get A/D value=-858993460 result=40 12:31:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:38 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:31:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:31:38 Aux= 12:31:38 Message to Camera, serial 64832 queued 12:32:15 Received message from Master: op=PointingHead serial=64845 12:32:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:32:15 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:32:16 Point started: ret=0 12:32:16 point_skyscan result=0 12:32:16 Check angles 12:32:16 SkyScan query 12:32:17 SkyScan query done: ret=0 az=135.135<-9009 ze=36.84<-9544 Statuses=0009 0009 12:32:17 Msec=0 True Az=135.135 Ze=36.84 Az status=0009 Ze status=0009 12:32:17 Check angles 12:32:17 SkyScan query 12:32:18 SkyScan query done: ret=0 az=117.57<-7838 ze=15.9<-10940 Statuses=0009 0009 12:32:18 Msec=750 True Az=117.57 Ze=15.9 Az status=0009 Ze status=0009 12:32:18 Check angles 12:32:18 SkyScan query 12:32:19 SkyScan query done: ret=0 az=100.23<-6682 ze=-5.085<-12339 Statuses=0009 0009 12:32:19 Msec=1500 True Az=100.23 Ze=-5.085 Az status=0009 Ze status=0009 12:32:19 Check angles 12:32:19 SkyScan query 12:32:19 SkyScan query done: ret=0 az=82.785<-5519 ze=-26.01<-13734 Statuses=0009 0009 12:32:19 Msec=2250 True Az=82.785 Ze=-26.01 Az status=0009 Ze status=0009 12:32:19 Check angles 12:32:19 SkyScan query 12:32:20 SkyScan query done: ret=0 az=65.265<-4351 ze=-38.565<-14571 Statuses=0009 0008 12:32:20 Msec=3000 True Az=65.265 Ze=-38.565 Az status=0009 Ze status=0008 12:32:20 Check angles 12:32:20 SkyScan query 12:32:21 SkyScan query done: ret=0 az=47.775<-3185 ze=-38.535<-14569 Statuses=0009 0008 12:32:21 Msec=3750 True Az=47.775 Ze=-38.535 Az status=0009 Ze status=0008 12:32:21 Check angles 12:32:21 SkyScan query 12:32:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:32:22 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:32:22 Message to Master queued w/err=0: serial=64845 error=0 12:32:27 Received message from Master: op=Filter serial=64846 12:32:27 Color wheel filter change from 0 to 0 12:32:27 FLIGetFilterPos err=0 currentPosition=0 12:32:27 FLIGetStepsRemaining err=0 RemainingSteps=0 12:32:27 Filter is already there-color wheel unchanged 12:32:27 Received message from Master: op=Shutter serial=64847 12:32:27 Shutter LASER close 12:32:27 Received message from Camera: op=State serial=64849 12:32:27 GetSingleValue result=40 Value=cccccccc 12:32:27 SkyScan query 12:32:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:32:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:27 Parameters OK 12:32:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:27 Set A/D data flow result=40 12:32:27 Set A/D channel type result=40 12:32:27 Set A/D encoding result=40 12:32:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:27 Set channel filter=0.000000e+000 result=40 12:32:27 Config A/D Result=40 12:32:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:27 Get A/D filter: -9.255963e+061 result=40 12:32:27 Get A/D value=-858993460 result=40 12:32:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:27 Parameters OK 12:32:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:27 Set A/D data flow result=40 12:32:27 Set A/D channel type result=40 12:32:27 Set A/D encoding result=40 12:32:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:27 Set channel filter=0.000000e+000 result=40 12:32:27 Config A/D Result=40 12:32:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:27 Get A/D filter: -9.255963e+061 result=40 12:32:27 Get A/D value=-858993460 result=40 12:32:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:32:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:32:27 Aux= 12:32:27 Message to Camera, serial 64849 queued 12:33:04 Received message from Master: op=PointingHead serial=64862 12:33:04 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:33:04 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:33:04 Point started: ret=0 12:33:04 point_skyscan result=0 12:33:05 Check angles 12:33:05 SkyScan query 12:33:06 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.85<-16590 Statuses=0009 0009 12:33:06 Msec=0 True Az=64.425 Ze=-68.85 Az status=0009 Ze status=0009 12:33:06 Check angles 12:33:06 SkyScan query 12:33:07 SkyScan query done: ret=0 az=81.84<-5456 ze=-89.805<-17987 Statuses=0009 0009 12:33:07 Msec=750 True Az=81.84 Ze=-89.805 Az status=0009 Ze status=0009 12:33:07 Check angles 12:33:07 SkyScan query 12:33:07 SkyScan query done: ret=0 az=99.435<-6629 ze=-110.775<-19385 Statuses=0009 0009 12:33:07 Msec=1500 True Az=99.435 Ze=-110.775 Az status=0009 Ze status=0009 12:33:08 Check angles 12:33:08 SkyScan query 12:33:08 SkyScan query done: ret=0 az=117.345<-7823 ze=-132.09<-20806 Statuses=0009 0009 12:33:08 Msec=2250 True Az=117.345 Ze=-132.09 Az status=0009 Ze status=0009 12:33:08 Check angles 12:33:08 SkyScan query 12:33:09 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.555<-21437 Statuses=0009 0008 12:33:09 Msec=3000 True Az=131.1 Ze=-141.555 Az status=0009 Ze status=0008 12:33:09 Check angles 12:33:09 SkyScan query 12:33:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 12:33:10 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 12:33:10 Message to Master queued w/err=0: serial=64862 error=0 12:33:15 Received message from Master: op=Filter serial=64863 12:33:15 Color wheel filter change from 0 to 0 12:33:15 FLIGetFilterPos err=0 currentPosition=0 12:33:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:33:15 Filter is already there-color wheel unchanged 12:33:15 Received message from Master: op=Shutter serial=64864 12:33:15 Shutter LASER close 12:33:15 Received message from Camera: op=State serial=64866 12:33:15 GetSingleValue result=40 Value=cccccccc 12:33:15 SkyScan query 12:33:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:33:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:15 Parameters OK 12:33:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:15 Set A/D data flow result=40 12:33:15 Set A/D channel type result=40 12:33:15 Set A/D encoding result=40 12:33:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:15 Set channel filter=0.000000e+000 result=40 12:33:15 Config A/D Result=40 12:33:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:15 Get A/D filter: -9.255963e+061 result=40 12:33:15 Get A/D value=-858993460 result=40 12:33:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:15 Parameters OK 12:33:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:15 Set A/D data flow result=40 12:33:15 Set A/D channel type result=40 12:33:15 Set A/D encoding result=40 12:33:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:15 Set channel filter=0.000000e+000 result=40 12:33:15 Config A/D Result=40 12:33:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:15 Get A/D filter: -9.255963e+061 result=40 12:33:15 Get A/D value=-858993460 result=40 12:33:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:15 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:33:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:33:15 Aux= 12:33:15 Message to Camera, serial 64866 queued 12:33:52 Received message from Master: op=PointingHead serial=64879 12:33:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:33:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:33:53 Point started: ret=0 12:33:53 point_skyscan result=0 12:33:53 Check angles 12:33:53 SkyScan query 12:33:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.195<-23413 Statuses=0009 0009 12:33:54 Msec=0 True Az=113.01 Ze=-171.195 Az status=0009 Ze status=0009 12:33:54 Check angles 12:33:54 SkyScan query 12:33:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:33:55 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:33:55 Message to Master queued w/err=0: serial=64879 error=0 12:34:00 Received message from Master: op=Filter serial=64880 12:34:00 Color wheel filter change from 0 to 0 12:34:00 FLIGetFilterPos err=0 currentPosition=0 12:34:00 FLIGetStepsRemaining err=0 RemainingSteps=0 12:34:00 Filter is already there-color wheel unchanged 12:34:00 Received message from Master: op=Shutter serial=64881 12:34:00 Shutter LASER open 12:34:00 Received message from Camera: op=State serial=64883 12:34:00 GetSingleValue result=40 Value=cccccccc 12:34:00 SkyScan query 12:34:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:34:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:01 Parameters OK 12:34:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:01 Set A/D data flow result=40 12:34:01 Set A/D channel type result=40 12:34:01 Set A/D encoding result=40 12:34:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:01 Set channel filter=0.000000e+000 result=40 12:34:01 Config A/D Result=40 12:34:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:01 Get A/D filter: -9.255963e+061 result=40 12:34:01 Get A/D value=-858993460 result=40 12:34:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:01 Parameters OK 12:34:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:01 Set A/D data flow result=40 12:34:01 Set A/D channel type result=40 12:34:01 Set A/D encoding result=40 12:34:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:01 Set channel filter=0.000000e+000 result=40 12:34:01 Config A/D Result=40 12:34:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:01 Get A/D filter: -9.255963e+061 result=40 12:34:01 Get A/D value=-858993460 result=40 12:34:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:34:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:34:01 Aux= 12:34:01 Message to Camera, serial 64883 queued 12:34:09 Received message from Master: op=Shutter serial=64893 12:34:09 Shutter LASER close 12:34:10 Received message from Master: op=PointingHead serial=64897 12:34:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:34:10 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:34:10 Point started: ret=0 12:34:10 point_skyscan result=0 12:34:11 Check angles 12:34:11 SkyScan query 12:34:11 SkyScan query done: ret=0 az=136.14<-9076 ze=-143.01<-21534 Statuses=0009 0009 12:34:11 Msec=0 True Az=136.14 Ze=-143.01 Az status=0009 Ze status=0009 12:34:12 Check angles 12:34:12 SkyScan query 12:34:12 SkyScan query done: ret=0 az=153.54<-10236 ze=-122.1<-20140 Statuses=0009 0009 12:34:12 Msec=750 True Az=153.54 Ze=-122.1 Az status=0009 Ze status=0009 12:34:12 Check angles 12:34:12 SkyScan query 12:34:13 SkyScan query done: ret=0 az=171.015<-11401 ze=-101.19<-18746 Statuses=0009 0009 12:34:13 Msec=1500 True Az=171.015 Ze=-101.19 Az status=0009 Ze status=0009 12:34:13 Check angles 12:34:13 SkyScan query 12:34:14 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.77<-17318 Statuses=0008 0009 12:34:14 Msec=2250 True Az=176.025 Ze=-79.77 Az status=0008 Ze status=0009 12:34:14 Check angles 12:34:14 SkyScan query 12:34:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.785<-15919 Statuses=0008 0009 12:34:14 Msec=3000 True Az=175.995 Ze=-58.785 Az status=0008 Ze status=0009 12:34:15 Check angles 12:34:15 SkyScan query 12:34:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:34:15 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:34:15 Message to Master queued w/err=0: serial=64897 error=0 12:34:20 Received message from Master: op=Filter serial=64898 12:34:20 Color wheel filter change from 0 to 0 12:34:20 FLIGetFilterPos err=0 currentPosition=0 12:34:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:34:20 Filter is already there-color wheel unchanged 12:34:20 Received message from Master: op=Shutter serial=64899 12:34:20 Shutter LASER close 12:34:20 Received message from Camera: op=State serial=64901 12:34:20 GetSingleValue result=40 Value=cccccccc 12:34:20 SkyScan query 12:34:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:34:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:21 Parameters OK 12:34:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:21 Set A/D data flow result=40 12:34:21 Set A/D channel type result=40 12:34:21 Set A/D encoding result=40 12:34:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:21 Set channel filter=0.000000e+000 result=40 12:34:21 Config A/D Result=40 12:34:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:21 Get A/D filter: -9.255963e+061 result=40 12:34:21 Get A/D value=-858993460 result=40 12:34:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:21 Parameters OK 12:34:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:21 Set A/D data flow result=40 12:34:21 Set A/D channel type result=40 12:34:21 Set A/D encoding result=40 12:34:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:21 Set channel filter=0.000000e+000 result=40 12:34:21 Config A/D Result=40 12:34:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:21 Get A/D filter: -9.255963e+061 result=40 12:34:21 Get A/D value=-858993460 result=40 12:34:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:34:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:34:21 Aux= 12:34:21 Message to Camera, serial 64901 queued 12:34:58 Received message from Master: op=PointingHead serial=64914 12:34:58 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:34:58 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:34:58 Point started: ret=0 12:34:58 point_skyscan result=0 12:34:59 Check angles 12:34:59 SkyScan query 12:35:00 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.75<-13450 Statuses=0009 0009 12:35:00 Msec=0 True Az=152.97 Ze=-21.75 Az status=0009 Ze status=0009 12:35:00 Check angles 12:35:00 SkyScan query 12:35:00 SkyScan query done: ret=0 az=135.48<-9032 ze=-0.75<-12050 Statuses=0009 0009 12:35:00 Msec=750 True Az=135.48 Ze=-0.75 Az status=0009 Ze status=0009 12:35:00 Check angles 12:35:00 SkyScan query 12:35:01 SkyScan query done: ret=0 az=117.51<-7834 ze=20.595<-10627 Statuses=0009 0009 12:35:01 Msec=1500 True Az=117.51 Ze=20.595 Az status=0009 Ze status=0009 12:35:01 Check angles 12:35:01 SkyScan query 12:35:02 SkyScan query done: ret=0 az=99.87<-6658 ze=41.985<-9201 Statuses=0009 0009 12:35:02 Msec=2250 True Az=99.87 Ze=41.985 Az status=0009 Ze status=0009 12:35:02 Check angles 12:35:02 SkyScan query 12:35:03 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 12:35:03 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 12:35:03 Check angles 12:35:03 SkyScan query 12:35:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:35:03 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:35:03 Message to Master queued w/err=0: serial=64914 error=0 12:35:08 Received message from Master: op=Filter serial=64915 12:35:08 Color wheel filter change from 0 to 0 12:35:08 FLIGetFilterPos err=0 currentPosition=0 12:35:08 FLIGetStepsRemaining err=0 RemainingSteps=0 12:35:08 Filter is already there-color wheel unchanged 12:35:09 Received message from Master: op=Shutter serial=64916 12:35:09 Shutter LASER close 12:35:09 Received message from Camera: op=State serial=64918 12:35:09 GetSingleValue result=40 Value=cccccccc 12:35:09 SkyScan query 12:35:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:35:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:09 Parameters OK 12:35:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:09 Set A/D data flow result=40 12:35:09 Set A/D channel type result=40 12:35:09 Set A/D encoding result=40 12:35:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:09 Set channel filter=0.000000e+000 result=40 12:35:09 Config A/D Result=40 12:35:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:09 Get A/D filter: -9.255963e+061 result=40 12:35:09 Get A/D value=-858993460 result=40 12:35:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:09 Parameters OK 12:35:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:09 Set A/D data flow result=40 12:35:09 Set A/D channel type result=40 12:35:09 Set A/D encoding result=40 12:35:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:09 Set channel filter=0.000000e+000 result=40 12:35:09 Config A/D Result=40 12:35:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:09 Get A/D filter: -9.255963e+061 result=40 12:35:09 Get A/D value=-858993460 result=40 12:35:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:35:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:35:09 Aux= 12:35:09 Message to Camera, serial 64918 queued 12:35:46 Received message from Master: op=PointingHead serial=64931 12:35:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:35:46 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:35:46 Point started: ret=0 12:35:46 point_skyscan result=0 12:35:47 Check angles 12:35:47 SkyScan query 12:35:48 SkyScan query done: ret=0 az=109.065<-7271 ze=38.49<-9434 Statuses=0009 0008 12:35:48 Msec=0 True Az=109.065 Ze=38.49 Az status=0009 Ze status=0008 12:35:48 Check angles [UTC 2018-12-11 12:35:48] 12:35:48 SkyScan query 12:35:49 SkyScan query done: ret=0 az=127.89<-8526 ze=38.49<-9434 Statuses=0009 0008 12:35:49 Msec=750 True Az=127.89 Ze=38.49 Az status=0009 Ze status=0008 12:35:49 Check angles 12:35:49 SkyScan query 12:35:49 SkyScan query done: ret=0 az=144.105<-9607 ze=38.505<-9433 Statuses=0009 0008 12:35:49 Msec=1500 True Az=144.105 Ze=38.505 Az status=0009 Ze status=0008 12:35:49 Check angles 12:35:49 SkyScan query 12:35:50 SkyScan query done: ret=0 az=161.94<-10796 ze=38.505<-9433 Statuses=0009 0008 12:35:50 Msec=2250 True Az=161.94 Ze=38.505 Az status=0009 Ze status=0008 12:35:50 Check angles 12:35:50 SkyScan query 12:35:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 12:35:51 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 12:35:51 Check angles 12:35:51 SkyScan query 12:35:51 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:35:51 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:35:51 Message to Master queued w/err=0: serial=64931 error=0 [UTC 2018-12-11 12:35:54] 12:35:56 Received message from Master: op=Filter serial=64932 12:35:56 Color wheel filter change from 0 to 0 12:35:56 FLIGetFilterPos err=0 currentPosition=0 12:35:56 FLIGetStepsRemaining err=0 RemainingSteps=0 12:35:56 Filter is already there-color wheel unchanged 12:35:57 Received message from Master: op=Shutter serial=64933 12:35:57 Shutter LASER close 12:35:57 Received message from Camera: op=State serial=64935 12:35:57 GetSingleValue result=40 Value=cccccccc 12:35:57 SkyScan query 12:35:57 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:35:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:57 Parameters OK 12:35:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:57 Set A/D data flow result=40 12:35:57 Set A/D channel type result=40 12:35:57 Set A/D encoding result=40 12:35:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:57 Set channel filter=0.000000e+000 result=40 12:35:57 Config A/D Result=40 12:35:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:57 Get A/D filter: -9.255963e+061 result=40 12:35:57 Get A/D value=-858993460 result=40 12:35:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:57 Parameters OK 12:35:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:57 Set A/D data flow result=40 12:35:57 Set A/D channel type result=40 12:35:57 Set A/D encoding result=40 12:35:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:57 Set channel filter=0.000000e+000 result=40 12:35:57 Config A/D Result=40 12:35:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:57 Get A/D filter: -9.255963e+061 result=40 12:35:57 Get A/D value=-858993460 result=40 12:35:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:35:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:35:57 Aux= 12:35:57 Message to Camera, serial 64935 queued 12:36:34 Received message from Master: op=PointingHead serial=64948 12:36:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:36:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:36:34 Point started: ret=0 12:36:34 point_skyscan result=0 12:36:35 Check angles 12:36:35 SkyScan query 12:36:36 SkyScan query done: ret=0 az=152.985<-10199 ze=8.775<-11415 Statuses=0009 0009 12:36:36 Msec=0 True Az=152.985 Ze=8.775 Az status=0009 Ze status=0009 12:36:36 Check angles 12:36:36 SkyScan query 12:36:37 SkyScan query done: ret=0 az=135.735<-9049 ze=-12.18<-12812 Statuses=0009 0009 12:36:37 Msec=750 True Az=135.735 Ze=-12.18 Az status=0009 Ze status=0009 12:36:37 Check angles 12:36:37 SkyScan query 12:36:37 SkyScan query done: ret=0 az=118.095<-7873 ze=-33.105<-14207 Statuses=0009 0009 12:36:37 Msec=1500 True Az=118.095 Ze=-33.105 Az status=0009 Ze status=0009 12:36:37 Check angles 12:36:37 SkyScan query 12:36:38 SkyScan query done: ret=0 az=100.275<-6685 ze=-51.555<-15437 Statuses=0009 0009 12:36:38 Msec=2250 True Az=100.275 Ze=-51.555 Az status=0009 Ze status=0009 12:36:38 Check angles 12:36:38 SkyScan query 12:36:39 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 12:36:39 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 12:36:39 Check angles 12:36:39 SkyScan query 12:36:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:36:40 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:36:40 Message to Master queued w/err=0: serial=64948 error=0 12:36:45 Received message from Master: op=Filter serial=64949 12:36:45 Color wheel filter change from 0 to 0 12:36:45 FLIGetFilterPos err=0 currentPosition=0 12:36:45 FLIGetStepsRemaining err=0 RemainingSteps=0 12:36:45 Filter is already there-color wheel unchanged 12:36:45 Received message from Master: op=Shutter serial=64950 12:36:45 Shutter LASER close 12:36:45 Received message from Camera: op=State serial=64952 12:36:45 GetSingleValue result=40 Value=cccccccc 12:36:45 SkyScan query 12:36:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:36:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:45 Parameters OK 12:36:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:45 Set A/D data flow result=40 12:36:45 Set A/D channel type result=40 12:36:45 Set A/D encoding result=40 12:36:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:45 Set channel filter=0.000000e+000 result=40 12:36:45 Config A/D Result=40 12:36:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:45 Get A/D filter: -9.255963e+061 result=40 12:36:45 Get A/D value=-858993460 result=40 12:36:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:45 Parameters OK 12:36:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:45 Set A/D data flow result=40 12:36:45 Set A/D channel type result=40 12:36:45 Set A/D encoding result=40 12:36:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:45 Set channel filter=0.000000e+000 result=40 12:36:45 Config A/D Result=40 12:36:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:45 Get A/D filter: -9.255963e+061 result=40 12:36:45 Get A/D value=-858993460 result=40 12:36:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:36:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:36:45 Aux= 12:36:45 Message to Camera, serial 64952 queued 12:37:22 Received message from Master: op=PointingHead serial=64965 12:37:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:37:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:37:23 Point started: ret=0 12:37:23 point_skyscan result=0 12:37:23 Check angles 12:37:23 SkyScan query 12:37:24 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.33<-17422 Statuses=0009 0009 12:37:24 Msec=0 True Az=108.99 Ze=-81.33 Az status=0009 Ze status=0009 12:37:24 Check angles 12:37:24 SkyScan query 12:37:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.3<-18820 Statuses=0008 0009 12:37:25 Msec=750 True Az=112.995 Ze=-102.3 Az status=0008 Ze status=0009 12:37:25 Check angles 12:37:25 SkyScan query 12:37:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.255<-20217 Statuses=0008 0009 12:37:25 Msec=1500 True Az=112.995 Ze=-123.255 Az status=0008 Ze status=0009 12:37:26 Check angles 12:37:26 SkyScan query 12:37:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.225<-21615 Statuses=0008 0009 12:37:26 Msec=2250 True Az=112.995 Ze=-144.225 Az status=0008 Ze status=0009 12:37:26 Check angles 12:37:26 SkyScan query 12:37:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.165<-23011 Statuses=0008 0009 12:37:27 Msec=3000 True Az=112.995 Ze=-165.165 Az status=0008 Ze status=0009 12:37:27 Check angles 12:37:27 SkyScan query 12:37:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 12:37:28 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 12:37:28 Message to Master queued w/err=0: serial=64965 error=0 12:37:33 Received message from Master: op=Filter serial=64966 12:37:33 Color wheel filter change from 0 to 0 12:37:33 FLIGetFilterPos err=0 currentPosition=0 12:37:33 FLIGetStepsRemaining err=0 RemainingSteps=0 12:37:33 Filter is already there-color wheel unchanged 12:37:33 Received message from Master: op=Shutter serial=64967 12:37:33 Shutter LASER open 12:37:33 Received message from Camera: op=State serial=64969 12:37:33 GetSingleValue result=40 Value=cccccccc 12:37:33 SkyScan query 12:37:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:37:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:34 Parameters OK 12:37:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:34 Set A/D data flow result=40 12:37:34 Set A/D channel type result=40 12:37:34 Set A/D encoding result=40 12:37:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:34 Set channel filter=0.000000e+000 result=40 12:37:34 Config A/D Result=40 12:37:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:34 Get A/D filter: -9.255963e+061 result=40 12:37:34 Get A/D value=-858993460 result=40 12:37:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:34 Parameters OK 12:37:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:34 Set A/D data flow result=40 12:37:34 Set A/D channel type result=40 12:37:34 Set A/D encoding result=40 12:37:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:34 Set channel filter=0.000000e+000 result=40 12:37:34 Config A/D Result=40 12:37:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:34 Get A/D filter: -9.255963e+061 result=40 12:37:34 Get A/D value=-858993460 result=40 12:37:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:37:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:37:34 Aux= 12:37:34 Message to Camera, serial 64969 queued 12:37:42 Received message from Master: op=Shutter serial=64979 12:37:42 Shutter LASER close 12:37:42 Received message from Master: op=PointingHead serial=64983 12:37:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:37:42 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:37:43 Point started: ret=0 12:37:43 point_skyscan result=0 12:37:43 Check angles 12:37:43 SkyScan query 12:37:44 SkyScan query done: ret=0 az=90.18<-6012 ze=157.5<-1500 Statuses=0009 0009 12:37:44 Msec=0 True Az=90.18 Ze=157.5 Az status=0009 Ze status=0009 12:37:44 Check angles 12:37:44 SkyScan query 12:37:45 SkyScan query done: ret=0 az=72.24<-4816 ze=136.08<-2928 Statuses=0009 0009 12:37:45 Msec=750 True Az=72.24 Ze=136.08 Az status=0009 Ze status=0009 12:37:45 Check angles 12:37:45 SkyScan query 12:37:46 SkyScan query done: ret=0 az=54.66<-3644 ze=114.675<-4355 Statuses=0009 0009 12:37:46 Msec=1500 True Az=54.66 Ze=114.675 Az status=0009 Ze status=0009 12:37:46 Check angles 12:37:46 SkyScan query 12:37:46 SkyScan query done: ret=0 az=40.92<-2728 ze=93.72<-5752 Statuses=0009 0009 12:37:46 Msec=2250 True Az=40.92 Ze=93.72 Az status=0009 Ze status=0009 12:37:47 Check angles 12:37:47 SkyScan query 12:37:47 SkyScan query done: ret=0 az=40.995<-2733 ze=72.75<-7150 Statuses=0008 0009 12:37:47 Msec=3000 True Az=40.995 Ze=72.75 Az status=0008 Ze status=0009 12:37:47 Check angles 12:37:47 SkyScan query 12:37:48 SkyScan query done: ret=0 az=40.995<-2733 ze=52.215<-8519 Statuses=0008 0009 12:37:48 Msec=3750 True Az=40.995 Ze=52.215 Az status=0008 Ze status=0009 12:37:48 Check angles 12:37:48 SkyScan query 12:37:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:37:49 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:37:49 Message to Master queued w/err=0: serial=64983 error=0 12:37:54 Received message from Master: op=Filter serial=64984 12:37:54 Color wheel filter change from 0 to 0 12:37:54 FLIGetFilterPos err=0 currentPosition=0 12:37:54 FLIGetStepsRemaining err=0 RemainingSteps=0 12:37:54 Filter is already there-color wheel unchanged 12:37:54 Received message from Master: op=Shutter serial=64985 12:37:54 Shutter LASER close 12:37:54 Received message from Camera: op=State serial=64987 12:37:54 GetSingleValue result=40 Value=cccccccc 12:37:54 SkyScan query 12:37:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:37:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:55 Parameters OK 12:37:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:55 Set A/D data flow result=40 12:37:55 Set A/D channel type result=40 12:37:55 Set A/D encoding result=40 12:37:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:55 Set channel filter=0.000000e+000 result=40 12:37:55 Config A/D Result=40 12:37:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:55 Get A/D filter: -9.255963e+061 result=40 12:37:55 Get A/D value=-858993460 result=40 12:37:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:55 Parameters OK 12:37:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:55 Set A/D data flow result=40 12:37:55 Set A/D channel type result=40 12:37:55 Set A/D encoding result=40 12:37:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:55 Set channel filter=0.000000e+000 result=40 12:37:55 Config A/D Result=40 12:37:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:55 Get A/D filter: -9.255963e+061 result=40 12:37:55 Get A/D value=-858993460 result=40 12:37:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:37:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:37:55 Aux= 12:37:55 Message to Camera, serial 64987 queued 12:38:31 Received message from Master: op=PointingHead serial=65000 12:38:31 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:38:31 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:38:32 Point started: ret=0 12:38:32 point_skyscan result=0 12:38:32 Check angles 12:38:32 SkyScan query 12:38:33 SkyScan query done: ret=0 az=63.765<-4251 ze=66.555<-7563 Statuses=0009 0008 12:38:33 Msec=0 True Az=63.765 Ze=66.555 Az status=0009 Ze status=0008 12:38:33 Check angles 12:38:33 SkyScan query 12:38:34 SkyScan query done: ret=0 az=81.105<-5407 ze=66.51<-7566 Statuses=0009 0008 12:38:34 Msec=750 True Az=81.105 Ze=66.51 Az status=0009 Ze status=0008 12:38:34 Check angles 12:38:34 SkyScan query 12:38:35 SkyScan query done: ret=0 az=98.655<-6577 ze=66.495<-7567 Statuses=0009 0008 12:38:35 Msec=1500 True Az=98.655 Ze=66.495 Az status=0009 Ze status=0008 12:38:35 Check angles 12:38:35 SkyScan query 12:38:35 SkyScan query done: ret=0 az=116.235<-7749 ze=66.495<-7567 Statuses=0009 0008 12:38:35 Msec=2250 True Az=116.235 Ze=66.495 Az status=0009 Ze status=0008 12:38:35 Check angles 12:38:35 SkyScan query 12:38:36 SkyScan query done: ret=0 az=133.755<-8917 ze=66.495<-7567 Statuses=0009 0008 12:38:36 Msec=3000 True Az=133.755 Ze=66.495 Az status=0009 Ze status=0008 12:38:36 Check angles 12:38:36 SkyScan query 12:38:37 SkyScan query done: ret=0 az=151.125<-10075 ze=66.495<-7567 Statuses=0009 0008 12:38:37 Msec=3750 True Az=151.125 Ze=66.495 Az status=0009 Ze status=0008 12:38:37 Check angles 12:38:37 SkyScan query 12:38:38 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:38:38 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 12:38:38 Message to Master queued w/err=0: serial=65000 error=0 12:38:43 Received message from Master: op=Filter serial=65001 12:38:43 Color wheel filter change from 0 to 0 12:38:43 FLIGetFilterPos err=0 currentPosition=0 12:38:43 FLIGetStepsRemaining err=0 RemainingSteps=0 12:38:43 Filter is already there-color wheel unchanged 12:38:43 Received message from Master: op=Shutter serial=65002 12:38:43 Shutter LASER close 12:38:43 Received message from Camera: op=State serial=65004 12:38:43 GetSingleValue result=40 Value=cccccccc 12:38:43 SkyScan query 12:38:43 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:38:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:43 Parameters OK 12:38:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:43 Set A/D data flow result=40 12:38:43 Set A/D channel type result=40 12:38:43 Set A/D encoding result=40 12:38:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:43 Set channel filter=0.000000e+000 result=40 12:38:43 Config A/D Result=40 12:38:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:43 Get A/D filter: -9.255963e+061 result=40 12:38:43 Get A/D value=-858993460 result=40 12:38:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:43 Parameters OK 12:38:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:43 Set A/D data flow result=40 12:38:43 Set A/D channel type result=40 12:38:43 Set A/D encoding result=40 12:38:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:43 Set channel filter=0.000000e+000 result=40 12:38:43 Config A/D Result=40 12:38:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:43 Get A/D filter: -9.255963e+061 result=40 12:38:43 Get A/D value=-858993460 result=40 12:38:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:43 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:38:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:38:43 Aux= 12:38:43 Message to Camera, serial 65004 queued 12:39:20 Received message from Master: op=PointingHead serial=65017 12:39:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:39:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:39:21 Point started: ret=0 12:39:21 point_skyscan result=0 12:39:21 Check angles 12:39:21 SkyScan query 12:39:22 SkyScan query done: ret=0 az=134.61<-8974 ze=36.36<-9576 Statuses=0009 0009 12:39:22 Msec=0 True Az=134.61 Ze=36.36 Az status=0009 Ze status=0009 12:39:22 Check angles 12:39:22 SkyScan query 12:39:23 SkyScan query done: ret=0 az=116.79<-7786 ze=14.955<-11003 Statuses=0009 0009 12:39:23 Msec=750 True Az=116.79 Ze=14.955 Az status=0009 Ze status=0009 12:39:23 Check angles 12:39:23 SkyScan query 12:39:23 SkyScan query done: ret=0 az=99.42<-6628 ze=-6<-12400 Statuses=0009 0009 12:39:23 Msec=1500 True Az=99.42 Ze=-6 Az status=0009 Ze status=0009 12:39:24 Check angles 12:39:24 SkyScan query 12:39:24 SkyScan query done: ret=0 az=82.02<-5468 ze=-26.955<-13797 Statuses=0009 0009 12:39:24 Msec=2250 True Az=82.02 Ze=-26.955 Az status=0009 Ze status=0009 12:39:24 Check angles 12:39:24 SkyScan query 12:39:25 SkyScan query done: ret=0 az=64.065<-4271 ze=-38.565<-14571 Statuses=0009 0008 12:39:25 Msec=3000 True Az=64.065 Ze=-38.565 Az status=0009 Ze status=0008 12:39:25 Check angles 12:39:25 SkyScan query 12:39:26 SkyScan query done: ret=0 az=46.575<-3105 ze=-38.52<-14568 Statuses=0009 0008 12:39:26 Msec=3750 True Az=46.575 Ze=-38.52 Az status=0009 Ze status=0008 12:39:26 Check angles 12:39:26 SkyScan query 12:39:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:39:26 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:39:26 Message to Master queued w/err=0: serial=65017 error=0 12:39:31 Received message from Master: op=Filter serial=65018 12:39:31 Color wheel filter change from 0 to 0 12:39:31 FLIGetFilterPos err=0 currentPosition=0 12:39:31 FLIGetStepsRemaining err=0 RemainingSteps=0 12:39:31 Filter is already there-color wheel unchanged 12:39:32 Received message from Master: op=Shutter serial=65019 12:39:32 Shutter LASER close 12:39:32 Received message from Camera: op=State serial=65021 12:39:32 GetSingleValue result=40 Value=cccccccc 12:39:32 SkyScan query 12:39:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:39:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:32 Parameters OK 12:39:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:32 Set A/D data flow result=40 12:39:32 Set A/D channel type result=40 12:39:32 Set A/D encoding result=40 12:39:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:32 Set channel filter=0.000000e+000 result=40 12:39:32 Config A/D Result=40 12:39:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:32 Get A/D filter: -9.255963e+061 result=40 12:39:32 Get A/D value=-858993460 result=40 12:39:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:32 Parameters OK 12:39:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:32 Set A/D data flow result=40 12:39:32 Set A/D channel type result=40 12:39:32 Set A/D encoding result=40 12:39:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:32 Set channel filter=0.000000e+000 result=40 12:39:32 Config A/D Result=40 12:39:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:32 Get A/D filter: -9.255963e+061 result=40 12:39:32 Get A/D value=-858993460 result=40 12:39:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:39:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:39:32 Aux= 12:39:32 Message to Camera, serial 65021 queued 12:40:09 Received message from Master: op=PointingHead serial=65034 12:40:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:40:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:40:09 Point started: ret=0 12:40:09 point_skyscan result=0 12:40:10 Check angles 12:40:10 SkyScan query 12:40:11 SkyScan query done: ret=0 az=63.885<-4259 ze=-67.98<-16532 Statuses=0009 0009 12:40:11 Msec=0 True Az=63.885 Ze=-67.98 Az status=0009 Ze status=0009 12:40:11 Check angles 12:40:11 SkyScan query 12:40:11 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.43<-17962 Statuses=0009 0009 12:40:11 Msec=750 True Az=81.585 Ze=-89.43 Az status=0009 Ze status=0009 12:40:12 Check angles 12:40:12 SkyScan query 12:40:12 SkyScan query done: ret=0 az=99.15<-6610 ze=-110.385<-19359 Statuses=0009 0009 12:40:12 Msec=1500 True Az=99.15 Ze=-110.385 Az status=0009 Ze status=0009 12:40:12 Check angles 12:40:12 SkyScan query 12:40:13 SkyScan query done: ret=0 az=116.7<-7780 ze=-131.31<-20754 Statuses=0009 0009 12:40:13 Msec=2250 True Az=116.7 Ze=-131.31 Az status=0009 Ze status=0009 12:40:13 Check angles 12:40:13 SkyScan query 12:40:14 SkyScan query done: ret=0 az=131.19<-8746 ze=-141.54<-21436 Statuses=0009 0008 12:40:14 Msec=3000 True Az=131.19 Ze=-141.54 Az status=0009 Ze status=0008 12:40:14 Check angles 12:40:14 SkyScan query 12:40:14 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:40:14 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:40:14 Message to Master queued w/err=0: serial=65034 error=0 12:40:19 Received message from Master: op=Filter serial=65035 12:40:19 Color wheel filter change from 0 to 0 12:40:19 FLIGetFilterPos err=0 currentPosition=0 12:40:19 FLIGetStepsRemaining err=0 RemainingSteps=0 12:40:19 Filter is already there-color wheel unchanged 12:40:20 Received message from Master: op=Shutter serial=65036 12:40:20 Shutter LASER close 12:40:20 Received message from Camera: op=State serial=65038 12:40:20 GetSingleValue result=40 Value=cccccccc 12:40:20 SkyScan query 12:40:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:40:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:20 Parameters OK 12:40:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:20 Set A/D data flow result=40 12:40:20 Set A/D channel type result=40 12:40:20 Set A/D encoding result=40 12:40:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:20 Set channel filter=0.000000e+000 result=40 12:40:20 Config A/D Result=40 12:40:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:20 Get A/D filter: -9.255963e+061 result=40 12:40:20 Get A/D value=-858993460 result=40 12:40:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:20 Parameters OK 12:40:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:20 Set A/D data flow result=40 12:40:20 Set A/D channel type result=40 12:40:20 Set A/D encoding result=40 12:40:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:20 Set channel filter=0.000000e+000 result=40 12:40:20 Config A/D Result=40 12:40:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:20 Get A/D filter: -9.255963e+061 result=40 12:40:20 Get A/D value=-858993460 result=40 12:40:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:40:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:40:20 Aux= 12:40:20 Message to Camera, serial 65038 queued 12:40:56 Received message from Master: op=PointingHead serial=65050 12:40:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:40:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:40:57 Point started: ret=0 12:40:57 point_skyscan result=0 12:40:57 Check angles 12:40:57 SkyScan query 12:40:58 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 12:40:58 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 12:40:58 Check angles 12:40:58 SkyScan query 12:40:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:40:59 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:40:59 Message to Master queued w/err=0: serial=65050 error=0 12:41:04 Received message from Master: op=Filter serial=65051 12:41:04 Color wheel filter change from 0 to 0 12:41:04 FLIGetFilterPos err=0 currentPosition=0 12:41:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:41:04 Filter is already there-color wheel unchanged 12:41:04 Received message from Master: op=Shutter serial=65052 12:41:04 Shutter LASER open 12:41:04 Received message from Camera: op=State serial=65054 12:41:04 GetSingleValue result=40 Value=cccccccc 12:41:04 SkyScan query 12:41:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:41:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:05 Parameters OK 12:41:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:05 Set A/D data flow result=40 12:41:05 Set A/D channel type result=40 12:41:05 Set A/D encoding result=40 12:41:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:05 Set channel filter=0.000000e+000 result=40 12:41:05 Config A/D Result=40 12:41:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:05 Get A/D filter: -9.255963e+061 result=40 12:41:05 Get A/D value=-858993460 result=40 12:41:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:05 Parameters OK 12:41:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:05 Set A/D data flow result=40 12:41:05 Set A/D channel type result=40 12:41:05 Set A/D encoding result=40 12:41:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:05 Set channel filter=0.000000e+000 result=40 12:41:05 Config A/D Result=40 12:41:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:05 Get A/D filter: -9.255963e+061 result=40 12:41:05 Get A/D value=-858993460 result=40 12:41:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:41:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:41:05 Aux= 12:41:05 Message to Camera, serial 65054 queued 12:41:13 Received message from Master: op=Shutter serial=65064 12:41:13 Shutter LASER close 12:41:14 Received message from Master: op=PointingHead serial=65068 12:41:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:41:14 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:41:14 Point started: ret=0 12:41:14 point_skyscan result=0 12:41:15 Check angles 12:41:15 SkyScan query 12:41:15 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.83<-21522 Statuses=0009 0009 12:41:15 Msec=0 True Az=136.35 Ze=-142.83 Az status=0009 Ze status=0009 12:41:15 Check angles 12:41:15 SkyScan query 12:41:16 SkyScan query done: ret=0 az=153.825<-10255 ze=-121.845<-20123 Statuses=0009 0009 12:41:16 Msec=750 True Az=153.825 Ze=-121.845 Az status=0009 Ze status=0009 12:41:16 Check angles 12:41:16 SkyScan query 12:41:17 SkyScan query done: ret=0 az=171.255<-11417 ze=-100.875<-18725 Statuses=0009 0009 12:41:17 Msec=1500 True Az=171.255 Ze=-100.875 Az status=0009 Ze status=0009 12:41:17 Check angles 12:41:17 SkyScan query 12:41:17 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.515<-17301 Statuses=0008 0009 12:41:17 Msec=2250 True Az=176.025 Ze=-79.515 Az status=0008 Ze status=0009 12:41:18 Check angles 12:41:18 SkyScan query 12:41:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.53<-15902 Statuses=0008 0009 12:41:18 Msec=3000 True Az=175.995 Ze=-58.53 Az status=0008 Ze status=0009 12:41:18 Check angles 12:41:18 SkyScan query 12:41:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 12:41:19 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 12:41:19 Message to Master queued w/err=0: serial=65068 error=0 12:41:24 Received message from Master: op=Filter serial=65069 12:41:24 Color wheel filter change from 0 to 0 12:41:24 FLIGetFilterPos err=0 currentPosition=0 12:41:24 FLIGetStepsRemaining err=0 RemainingSteps=0 12:41:24 Filter is already there-color wheel unchanged 12:41:24 Received message from Master: op=Shutter serial=65070 12:41:24 Shutter LASER close 12:41:24 Received message from Camera: op=State serial=65072 12:41:24 GetSingleValue result=40 Value=cccccccc 12:41:24 SkyScan query 12:41:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:41:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:25 Parameters OK 12:41:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:25 Set A/D data flow result=40 12:41:25 Set A/D channel type result=40 12:41:25 Set A/D encoding result=40 12:41:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:25 Set channel filter=0.000000e+000 result=40 12:41:25 Config A/D Result=40 12:41:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:25 Get A/D filter: -9.255963e+061 result=40 12:41:25 Get A/D value=-858993460 result=40 12:41:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:25 Parameters OK 12:41:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:25 Set A/D data flow result=40 12:41:25 Set A/D channel type result=40 12:41:25 Set A/D encoding result=40 12:41:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:25 Set channel filter=0.000000e+000 result=40 12:41:25 Config A/D Result=40 12:41:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:25 Get A/D filter: -9.255963e+061 result=40 12:41:25 Get A/D value=-858993460 result=40 12:41:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:41:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:41:25 Aux= 12:41:25 Message to Camera, serial 65072 queued 12:42:02 Received message from Master: op=PointingHead serial=65085 12:42:02 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:42:02 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:42:02 Point started: ret=0 12:42:02 point_skyscan result=0 12:42:03 Check angles 12:42:03 SkyScan query 12:42:03 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.9<-13460 Statuses=0009 0009 12:42:03 Msec=0 True Az=152.97 Ze=-21.9 Az status=0009 Ze status=0009 12:42:04 Check angles 12:42:04 SkyScan query 12:42:04 SkyScan query done: ret=0 az=135.72<-9048 ze=-0.885<-12059 Statuses=0009 0009 12:42:04 Msec=750 True Az=135.72 Ze=-0.885 Az status=0009 Ze status=0009 12:42:04 Check angles 12:42:04 SkyScan query 12:42:05 SkyScan query done: ret=0 az=117.705<-7847 ze=20.46<-10636 Statuses=0009 0009 12:42:05 Msec=1500 True Az=117.705 Ze=20.46 Az status=0009 Ze status=0009 12:42:05 Check angles 12:42:05 SkyScan query 12:42:06 SkyScan query done: ret=0 az=100.11<-6674 ze=41.46<-9236 Statuses=0009 0009 12:42:06 Msec=2250 True Az=100.11 Ze=41.46 Az status=0009 Ze status=0009 12:42:06 Check angles 12:42:06 SkyScan query 12:42:06 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 12:42:06 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 12:42:07 Check angles 12:42:07 SkyScan query 12:42:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:42:07 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:42:07 Message to Master queued w/err=0: serial=65085 error=0 12:42:12 Received message from Master: op=Filter serial=65086 12:42:12 Color wheel filter change from 0 to 0 12:42:12 FLIGetFilterPos err=0 currentPosition=0 12:42:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:42:12 Filter is already there-color wheel unchanged 12:42:12 Received message from Master: op=Shutter serial=65087 12:42:12 Shutter LASER close 12:42:12 Received message from Camera: op=State serial=65089 12:42:12 GetSingleValue result=40 Value=cccccccc 12:42:12 SkyScan query 12:42:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:42:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:13 Parameters OK 12:42:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:13 Set A/D data flow result=40 12:42:13 Set A/D channel type result=40 12:42:13 Set A/D encoding result=40 12:42:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:13 Set channel filter=0.000000e+000 result=40 12:42:13 Config A/D Result=40 12:42:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:13 Get A/D filter: -9.255963e+061 result=40 12:42:13 Get A/D value=-858993460 result=40 12:42:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:13 Parameters OK 12:42:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:13 Set A/D data flow result=40 12:42:13 Set A/D channel type result=40 12:42:13 Set A/D encoding result=40 12:42:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:13 Set channel filter=0.000000e+000 result=40 12:42:13 Config A/D Result=40 12:42:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:13 Get A/D filter: -9.255963e+061 result=40 12:42:13 Get A/D value=-858993460 result=40 12:42:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:42:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:42:13 Aux= 12:42:13 Message to Camera, serial 65089 queued 12:42:50 Received message from Master: op=PointingHead serial=65102 12:42:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:42:50 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:42:50 Point started: ret=0 12:42:50 point_skyscan result=0 12:42:51 Check angles 12:42:51 SkyScan query 12:42:51 SkyScan query done: ret=0 az=109.215<-7281 ze=38.49<-9434 Statuses=0009 0008 12:42:51 Msec=0 True Az=109.215 Ze=38.49 Az status=0009 Ze status=0008 12:42:52 Check angles 12:42:52 SkyScan query 12:42:52 SkyScan query done: ret=0 az=126.705<-8447 ze=38.49<-9434 Statuses=0009 0008 12:42:52 Msec=750 True Az=126.705 Ze=38.49 Az status=0009 Ze status=0008 12:42:52 Check angles 12:42:52 SkyScan query 12:42:53 SkyScan query done: ret=0 az=144.18<-9612 ze=38.505<-9433 Statuses=0009 0008 12:42:53 Msec=1500 True Az=144.18 Ze=38.505 Az status=0009 Ze status=0008 12:42:53 Check angles 12:42:53 SkyScan query 12:42:54 SkyScan query done: ret=0 az=161.94<-10796 ze=38.505<-9433 Statuses=0009 0008 12:42:54 Msec=2250 True Az=161.94 Ze=38.505 Az status=0009 Ze status=0008 12:42:54 Check angles 12:42:54 SkyScan query 12:42:54 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:42:54 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:42:55 Check angles 12:42:55 SkyScan query 12:42:55 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:42:55 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:42:55 Message to Master queued w/err=0: serial=65102 error=0 12:43:00 Received message from Master: op=Filter serial=65103 12:43:00 Color wheel filter change from 0 to 0 12:43:00 FLIGetFilterPos err=0 currentPosition=0 12:43:00 FLIGetStepsRemaining err=0 RemainingSteps=0 12:43:00 Filter is already there-color wheel unchanged 12:43:00 Received message from Master: op=Shutter serial=65104 12:43:00 Shutter LASER close 12:43:00 Received message from Camera: op=State serial=65106 12:43:00 GetSingleValue result=40 Value=cccccccc 12:43:00 SkyScan query 12:43:01 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:43:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:01 Parameters OK 12:43:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:01 Set A/D data flow result=40 12:43:01 Set A/D channel type result=40 12:43:01 Set A/D encoding result=40 12:43:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:01 Set channel filter=0.000000e+000 result=40 12:43:01 Config A/D Result=40 12:43:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:01 Get A/D filter: -9.255963e+061 result=40 12:43:01 Get A/D value=-858993460 result=40 12:43:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:01 Parameters OK 12:43:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:01 Set A/D data flow result=40 12:43:01 Set A/D channel type result=40 12:43:01 Set A/D encoding result=40 12:43:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:01 Set channel filter=0.000000e+000 result=40 12:43:01 Config A/D Result=40 12:43:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:01 Get A/D filter: -9.255963e+061 result=40 12:43:01 Get A/D value=-858993460 result=40 12:43:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:43:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:43:01 Aux= 12:43:01 Message to Camera, serial 65106 queued 12:43:38 Received message from Master: op=PointingHead serial=65119 12:43:38 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:43:38 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:43:38 Point started: ret=0 12:43:38 point_skyscan result=0 12:43:39 Check angles 12:43:39 SkyScan query 12:43:40 SkyScan query done: ret=0 az=152.955<-10197 ze=8.715<-11419 Statuses=0009 0009 12:43:40 Msec=0 True Az=152.955 Ze=8.715 Az status=0009 Ze status=0009 12:43:40 Check angles 12:43:40 SkyScan query 12:43:40 SkyScan query done: ret=0 az=135.48<-9032 ze=-12.255<-12817 Statuses=0009 0009 12:43:40 Msec=750 True Az=135.48 Ze=-12.255 Az status=0009 Ze status=0009 12:43:40 Check angles 12:43:40 SkyScan query 12:43:41 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.6<-14240 Statuses=0009 0009 12:43:41 Msec=1500 True Az=117.54 Ze=-33.6 Az status=0009 Ze status=0009 12:43:41 Check angles 12:43:41 SkyScan query 12:43:42 SkyScan query done: ret=0 az=99.81<-6654 ze=-51.57<-15438 Statuses=0009 0009 12:43:42 Msec=2250 True Az=99.81 Ze=-51.57 Az status=0009 Ze status=0009 12:43:42 Check angles 12:43:42 SkyScan query 12:43:43 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 12:43:43 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 12:43:43 Check angles 12:43:43 SkyScan query 12:43:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:43:43 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:43:43 Message to Master queued w/err=0: serial=65119 error=0 12:43:48 Received message from Master: op=Filter serial=65120 12:43:48 Color wheel filter change from 0 to 0 12:43:48 FLIGetFilterPos err=0 currentPosition=0 12:43:48 FLIGetStepsRemaining err=0 RemainingSteps=0 12:43:48 Filter is already there-color wheel unchanged 12:43:49 Received message from Master: op=Shutter serial=65121 12:43:49 Shutter LASER close 12:43:49 Received message from Camera: op=State serial=65123 12:43:49 GetSingleValue result=40 Value=cccccccc 12:43:49 SkyScan query 12:43:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:43:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:49 Parameters OK 12:43:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:49 Set A/D data flow result=40 12:43:49 Set A/D channel type result=40 12:43:49 Set A/D encoding result=40 12:43:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:49 Set channel filter=0.000000e+000 result=40 12:43:49 Config A/D Result=40 12:43:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:49 Get A/D filter: -9.255963e+061 result=40 12:43:49 Get A/D value=-858993460 result=40 12:43:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:49 Parameters OK 12:43:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:49 Set A/D data flow result=40 12:43:49 Set A/D channel type result=40 12:43:49 Set A/D encoding result=40 12:43:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:49 Set channel filter=0.000000e+000 result=40 12:43:49 Config A/D Result=40 12:43:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:49 Get A/D filter: -9.255963e+061 result=40 12:43:49 Get A/D value=-858993460 result=40 12:43:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:43:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:43:49 Aux= 12:43:49 Message to Camera, serial 65123 queued 12:44:26 Received message from Master: op=PointingHead serial=65136 12:44:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:44:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:44:26 Point started: ret=0 12:44:26 point_skyscan result=0 12:44:27 Check angles 12:44:27 SkyScan query 12:44:28 SkyScan query done: ret=0 az=109.245<-7283 ze=-81.525<-17435 Statuses=0009 0009 12:44:28 Msec=0 True Az=109.245 Ze=-81.525 Az status=0009 Ze status=0009 12:44:28 Check angles 12:44:28 SkyScan query 12:44:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.555<-18837 Statuses=0008 0009 12:44:28 Msec=750 True Az=112.995 Ze=-102.555 Az status=0008 Ze status=0009 12:44:29 Check angles 12:44:29 SkyScan query 12:44:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.435<-20229 Statuses=0008 0009 12:44:29 Msec=1500 True Az=112.995 Ze=-123.435 Az status=0008 Ze status=0009 12:44:29 Check angles 12:44:29 SkyScan query 12:44:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.39<-21626 Statuses=0008 0009 12:44:30 Msec=2250 True Az=112.995 Ze=-144.39 Az status=0008 Ze status=0009 12:44:30 Check angles 12:44:30 SkyScan query 12:44:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.33<-23022 Statuses=0008 0009 12:44:31 Msec=3000 True Az=112.995 Ze=-165.33 Az status=0008 Ze status=0009 12:44:31 Check angles 12:44:31 SkyScan query 12:44:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:44:31 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:44:31 Message to Master queued w/err=0: serial=65136 error=0 12:44:36 Received message from Master: op=Filter serial=65137 12:44:36 Color wheel filter change from 0 to 0 12:44:36 FLIGetFilterPos err=0 currentPosition=0 12:44:36 FLIGetStepsRemaining err=0 RemainingSteps=0 12:44:36 Filter is already there-color wheel unchanged 12:44:37 Received message from Master: op=Shutter serial=65138 12:44:37 Shutter LASER open 12:44:37 Received message from Camera: op=State serial=65140 12:44:37 GetSingleValue result=40 Value=cccccccc 12:44:37 SkyScan query 12:44:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:44:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:37 Parameters OK 12:44:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:37 Set A/D data flow result=40 12:44:37 Set A/D channel type result=40 12:44:37 Set A/D encoding result=40 12:44:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:37 Set channel filter=0.000000e+000 result=40 12:44:37 Config A/D Result=40 12:44:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:37 Get A/D filter: -9.255963e+061 result=40 12:44:37 Get A/D value=-858993460 result=40 12:44:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:37 Parameters OK 12:44:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:37 Set A/D data flow result=40 12:44:37 Set A/D channel type result=40 12:44:37 Set A/D encoding result=40 12:44:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:37 Set channel filter=0.000000e+000 result=40 12:44:37 Config A/D Result=40 12:44:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:37 Get A/D filter: -9.255963e+061 result=40 12:44:37 Get A/D value=-858993460 result=40 12:44:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:44:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:44:37 Aux= 12:44:37 Message to Camera, serial 65140 queued 12:44:46 Received message from Master: op=Shutter serial=65150 12:44:46 Shutter LASER close 12:44:46 Received message from Master: op=PointingHead serial=65154 12:44:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:44:46 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:44:47 Point started: ret=0 12:44:47 point_skyscan result=0 12:44:47 Check angles 12:44:47 SkyScan query 12:44:48 SkyScan query done: ret=0 az=89.67<-5978 ze=157.005<-1533 Statuses=0009 0009 12:44:48 Msec=0 True Az=89.67 Ze=157.005 Az status=0009 Ze status=0009 12:44:48 Check angles 12:44:48 SkyScan query 12:44:49 SkyScan query done: ret=0 az=71.82<-4788 ze=135.615<-2959 Statuses=0009 0009 12:44:49 Msec=750 True Az=71.82 Ze=135.615 Az status=0009 Ze status=0009 12:44:49 Check angles 12:44:49 SkyScan query 12:44:49 SkyScan query done: ret=0 az=54.63<-3642 ze=114.615<-4359 Statuses=0009 0009 12:44:49 Msec=1500 True Az=54.63 Ze=114.615 Az status=0009 Ze status=0009 12:44:50 Check angles 12:44:50 SkyScan query 12:44:50 SkyScan query done: ret=0 az=40.92<-2728 ze=93.69<-5754 Statuses=0009 0009 12:44:50 Msec=2250 True Az=40.92 Ze=93.69 Az status=0009 Ze status=0009 12:44:50 Check angles 12:44:50 SkyScan query 12:44:51 SkyScan query done: ret=0 az=40.995<-2733 ze=72.705<-7153 Statuses=0008 0009 12:44:51 Msec=3000 True Az=40.995 Ze=72.705 Az status=0008 Ze status=0009 12:44:51 Check angles 12:44:51 SkyScan query 12:44:52 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 12:44:52 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 12:44:52 Check angles 12:44:52 SkyScan query 12:44:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:44:52 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:44:52 Message to Master queued w/err=0: serial=65154 error=0 12:44:57 Received message from Master: op=Filter serial=65155 12:44:57 Color wheel filter change from 0 to 0 12:44:57 FLIGetFilterPos err=0 currentPosition=0 12:44:57 FLIGetStepsRemaining err=0 RemainingSteps=0 12:44:57 Filter is already there-color wheel unchanged 12:44:58 Received message from Master: op=Shutter serial=65156 12:44:58 Shutter LASER close 12:44:58 Received message from Camera: op=State serial=65158 12:44:58 GetSingleValue result=40 Value=cccccccc 12:44:58 SkyScan query 12:44:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:44:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:58 Parameters OK 12:44:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:58 Set A/D data flow result=40 12:44:58 Set A/D channel type result=40 12:44:58 Set A/D encoding result=40 12:44:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:58 Set channel filter=0.000000e+000 result=40 12:44:58 Config A/D Result=40 12:44:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:58 Get A/D filter: -9.255963e+061 result=40 12:44:58 Get A/D value=-858993460 result=40 12:44:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:58 Parameters OK 12:44:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:58 Set A/D data flow result=40 12:44:58 Set A/D channel type result=40 12:44:58 Set A/D encoding result=40 12:44:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:58 Set channel filter=0.000000e+000 result=40 12:44:58 Config A/D Result=40 12:44:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:58 Get A/D filter: -9.255963e+061 result=40 12:44:58 Get A/D value=-858993460 result=40 12:44:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:44:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:44:58 Aux= 12:44:58 Message to Camera, serial 65158 queued 12:45:29 Received message from Master: op=Identify serial=65161 12:45:35 Received message from Master: op=PointingHead serial=65174 12:45:35 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:45:35 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:45:36 Point started: ret=0 12:45:36 point_skyscan result=0 12:45:36 Check angles 12:45:36 SkyScan query 12:45:37 SkyScan query done: ret=0 az=63.765<-4251 ze=66.555<-7563 Statuses=0009 0008 12:45:37 Msec=0 True Az=63.765 Ze=66.555 Az status=0009 Ze status=0008 12:45:37 Check angles 12:45:37 SkyScan query 12:45:38 SkyScan query done: ret=0 az=81.165<-5411 ze=66.51<-7566 Statuses=0009 0008 12:45:38 Msec=750 True Az=81.165 Ze=66.51 Az status=0009 Ze status=0008 12:45:38 Check angles 12:45:38 SkyScan query 12:45:38 SkyScan query done: ret=0 az=98.985<-6599 ze=66.495<-7567 Statuses=0009 0008 12:45:38 Msec=1500 True Az=98.985 Ze=66.495 Az status=0009 Ze status=0008 12:45:39 Check angles 12:45:39 SkyScan query 12:45:39 SkyScan query done: ret=0 az=116.685<-7779 ze=66.495<-7567 Statuses=0009 0008 12:45:39 Msec=2250 True Az=116.685 Ze=66.495 Az status=0009 Ze status=0008 12:45:39 Check angles 12:45:39 SkyScan query 12:45:40 SkyScan query done: ret=0 az=134.205<-8947 ze=66.495<-7567 Statuses=0009 0008 12:45:40 Msec=3000 True Az=134.205 Ze=66.495 Az status=0009 Ze status=0008 12:45:40 Check angles 12:45:40 SkyScan query 12:45:41 SkyScan query done: ret=0 az=151.455<-10097 ze=66.495<-7567 Statuses=0009 0008 [UTC 2018-12-11 12:45:41] 12:45:41 Msec=3750 True Az=151.455 Ze=66.495 Az status=0009 Ze status=0008 12:45:41 Check angles 12:45:41 SkyScan query 12:45:41 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:45:41 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 12:45:41 Message to Master queued w/err=0: serial=65174 error=0 12:45:46 Received message from Master: op=Filter serial=65175 12:45:46 Color wheel filter change from 0 to 0 12:45:46 FLIGetFilterPos err=0 currentPosition=0 12:45:46 FLIGetStepsRemaining err=0 RemainingSteps=0 12:45:46 Filter is already there-color wheel unchanged 12:45:47 Received message from Master: op=Shutter serial=65176 12:45:47 Shutter LASER close 12:45:47 Received message from Camera: op=State serial=65178 12:45:47 GetSingleValue result=40 Value=cccccccc 12:45:47 SkyScan query 12:45:47 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:45:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:47 Parameters OK 12:45:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:47 Set A/D data flow result=40 12:45:47 Set A/D channel type result=40 12:45:47 Set A/D encoding result=40 12:45:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:47 Set channel filter=0.000000e+000 result=40 12:45:47 Config A/D Result=40 12:45:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:47 Get A/D filter: -9.255963e+061 result=40 12:45:47 Get A/D value=-858993460 result=40 12:45:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:47 Parameters OK 12:45:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:47 Set A/D data flow result=40 12:45:47 Set A/D channel type result=40 12:45:47 Set A/D encoding result=40 12:45:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:47 Set channel filter=0.000000e+000 result=40 12:45:47 Config A/D Result=40 12:45:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:47 Get A/D filter: -9.255963e+061 result=40 12:45:47 Get A/D value=-858993460 result=40 12:45:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:47 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:45:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:45:47 Aux= 12:45:47 Message to Camera, serial 65178 queued 12:46:24 Received message from Master: op=PointingHead serial=65191 12:46:24 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:46:24 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:46:24 Point started: ret=0 12:46:24 point_skyscan result=0 12:46:25 Check angles 12:46:25 SkyScan query 12:46:26 SkyScan query done: ret=0 az=134.955<-8997 ze=36.765<-9549 Statuses=0009 0009 12:46:26 Msec=0 True Az=134.955 Ze=36.765 Az status=0009 Ze status=0009 12:46:26 Check angles 12:46:26 SkyScan query 12:46:26 SkyScan query done: ret=0 az=117.51<-7834 ze=15.84<-10944 Statuses=0009 0009 12:46:26 Msec=750 True Az=117.51 Ze=15.84 Az status=0009 Ze status=0009 12:46:27 Check angles 12:46:27 SkyScan query 12:46:27 SkyScan query done: ret=0 az=100.125<-6675 ze=-5.145<-12343 Statuses=0009 0009 12:46:27 Msec=1500 True Az=100.125 Ze=-5.145 Az status=0009 Ze status=0009 12:46:27 Check angles 12:46:27 SkyScan query 12:46:28 SkyScan query done: ret=0 az=82.605<-5507 ze=-26.07<-13738 Statuses=0009 0009 12:46:28 Msec=2250 True Az=82.605 Ze=-26.07 Az status=0009 Ze status=0009 12:46:28 Check angles 12:46:28 SkyScan query 12:46:29 SkyScan query done: ret=0 az=64.74<-4316 ze=-38.565<-14571 Statuses=0009 0008 12:46:29 Msec=3000 True Az=64.74 Ze=-38.565 Az status=0009 Ze status=0008 12:46:29 Check angles 12:46:29 SkyScan query 12:46:29 SkyScan query done: ret=0 az=47.325<-3155 ze=-38.535<-14569 Statuses=0009 0008 12:46:29 Msec=3750 True Az=47.325 Ze=-38.535 Az status=0009 Ze status=0008 12:46:30 Check angles 12:46:30 SkyScan query 12:46:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:46:30 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:46:30 Message to Master queued w/err=0: serial=65191 error=0 12:46:35 Received message from Master: op=Filter serial=65192 12:46:35 Color wheel filter change from 0 to 0 12:46:35 FLIGetFilterPos err=0 currentPosition=0 12:46:35 FLIGetStepsRemaining err=0 RemainingSteps=0 12:46:35 Filter is already there-color wheel unchanged 12:46:35 Received message from Master: op=Shutter serial=65193 12:46:35 Shutter LASER close 12:46:35 Received message from Camera: op=State serial=65195 12:46:35 GetSingleValue result=40 Value=cccccccc 12:46:35 SkyScan query 12:46:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:46:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:36 Parameters OK 12:46:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:36 Set A/D data flow result=40 12:46:36 Set A/D channel type result=40 12:46:36 Set A/D encoding result=40 12:46:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:36 Set channel filter=0.000000e+000 result=40 12:46:36 Config A/D Result=40 12:46:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:36 Get A/D filter: -9.255963e+061 result=40 12:46:36 Get A/D value=-858993460 result=40 12:46:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:36 Parameters OK 12:46:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:36 Set A/D data flow result=40 12:46:36 Set A/D channel type result=40 12:46:36 Set A/D encoding result=40 12:46:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:36 Set channel filter=0.000000e+000 result=40 12:46:36 Config A/D Result=40 12:46:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:36 Get A/D filter: -9.255963e+061 result=40 12:46:36 Get A/D value=-858993460 result=40 12:46:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:46:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:46:36 Aux= 12:46:36 Message to Camera, serial 65195 queued 12:47:13 Received message from Master: op=PointingHead serial=65208 12:47:13 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:47:13 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:47:13 Point started: ret=0 12:47:13 point_skyscan result=0 12:47:14 Check angles 12:47:14 SkyScan query 12:47:15 SkyScan query done: ret=0 az=63.78<-4252 ze=-67.98<-16532 Statuses=0009 0009 12:47:15 Msec=0 True Az=63.78 Ze=-67.98 Az status=0009 Ze status=0009 12:47:15 Check angles 12:47:15 SkyScan query 12:47:15 SkyScan query done: ret=0 az=81.09<-5406 ze=-88.965<-17931 Statuses=0009 0009 12:47:15 Msec=750 True Az=81.09 Ze=-88.965 Az status=0009 Ze status=0009 12:47:15 Check angles 12:47:15 SkyScan query 12:47:16 SkyScan query done: ret=0 az=98.625<-6575 ze=-109.905<-19327 Statuses=0009 0009 12:47:16 Msec=1500 True Az=98.625 Ze=-109.905 Az status=0009 Ze status=0009 12:47:16 Check angles 12:47:16 SkyScan query 12:47:17 SkyScan query done: ret=0 az=116.175<-7745 ze=-130.875<-20725 Statuses=0009 0009 12:47:17 Msec=2250 True Az=116.175 Ze=-130.875 Az status=0009 Ze status=0009 12:47:17 Check angles 12:47:17 SkyScan query 12:47:18 SkyScan query done: ret=0 az=131.16<-8744 ze=-141.54<-21436 Statuses=0009 0008 12:47:18 Msec=3000 True Az=131.16 Ze=-141.54 Az status=0009 Ze status=0008 12:47:18 Check angles 12:47:18 SkyScan query 12:47:18 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:47:18 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:47:18 Message to Master queued w/err=0: serial=65208 error=0 12:47:23 Received message from Master: op=Filter serial=65209 12:47:23 Color wheel filter change from 0 to 0 12:47:23 FLIGetFilterPos err=0 currentPosition=0 12:47:23 FLIGetStepsRemaining err=0 RemainingSteps=0 12:47:23 Filter is already there-color wheel unchanged 12:47:23 Received message from Master: op=Shutter serial=65210 12:47:23 Shutter LASER close 12:47:24 Received message from Camera: op=State serial=65212 12:47:24 GetSingleValue result=40 Value=cccccccc 12:47:24 SkyScan query 12:47:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:47:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:24 Parameters OK 12:47:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:24 Set A/D data flow result=40 12:47:24 Set A/D channel type result=40 12:47:24 Set A/D encoding result=40 12:47:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:24 Set channel filter=0.000000e+000 result=40 12:47:24 Config A/D Result=40 12:47:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:24 Get A/D filter: -9.255963e+061 result=40 12:47:24 Get A/D value=-858993460 result=40 12:47:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:24 Parameters OK 12:47:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:24 Set A/D data flow result=40 12:47:24 Set A/D channel type result=40 12:47:24 Set A/D encoding result=40 12:47:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:24 Set channel filter=0.000000e+000 result=40 12:47:24 Config A/D Result=40 12:47:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:24 Get A/D filter: -9.255963e+061 result=40 12:47:24 Get A/D value=-858993460 result=40 12:47:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:24 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:47:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:47:24 Aux= 12:47:24 Message to Camera, serial 65212 queued 12:48:01 Received message from Master: op=PointingHead serial=65225 12:48:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:48:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:48:01 Point started: ret=0 12:48:01 point_skyscan result=0 12:48:02 Check angles 12:48:02 SkyScan query 12:48:03 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 12:48:03 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 12:48:03 Check angles 12:48:03 SkyScan query 12:48:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:48:03 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:48:03 Message to Master queued w/err=0: serial=65225 error=0 12:48:08 Received message from Master: op=Filter serial=65226 12:48:08 Color wheel filter change from 0 to 0 12:48:08 FLIGetFilterPos err=0 currentPosition=0 12:48:08 FLIGetStepsRemaining err=0 RemainingSteps=0 12:48:08 Filter is already there-color wheel unchanged 12:48:09 Received message from Master: op=Shutter serial=65227 12:48:09 Shutter LASER open 12:48:09 Received message from Camera: op=State serial=65229 12:48:09 GetSingleValue result=40 Value=cccccccc 12:48:09 SkyScan query 12:48:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:48:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:09 Parameters OK 12:48:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:09 Set A/D data flow result=40 12:48:09 Set A/D channel type result=40 12:48:09 Set A/D encoding result=40 12:48:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:09 Set channel filter=0.000000e+000 result=40 12:48:09 Config A/D Result=40 12:48:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:09 Get A/D filter: -9.255963e+061 result=40 12:48:09 Get A/D value=-858993460 result=40 12:48:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:09 Parameters OK 12:48:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:09 Set A/D data flow result=40 12:48:09 Set A/D channel type result=40 12:48:09 Set A/D encoding result=40 12:48:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:09 Set channel filter=0.000000e+000 result=40 12:48:09 Config A/D Result=40 12:48:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:09 Get A/D filter: -9.255963e+061 result=40 12:48:09 Get A/D value=-858993460 result=40 12:48:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:48:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:48:09 Aux= 12:48:09 Message to Camera, serial 65229 queued 12:48:18 Received message from Master: op=Shutter serial=65239 12:48:18 Shutter LASER close 12:48:18 Received message from Master: op=PointingHead serial=65243 12:48:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:48:18 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:48:19 Point started: ret=0 12:48:19 point_skyscan result=0 12:48:19 Check angles 12:48:19 SkyScan query 12:48:20 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.43<-21562 Statuses=0009 0009 12:48:20 Msec=0 True Az=135.765 Ze=-143.43 Az status=0009 Ze status=0009 12:48:20 Check angles 12:48:20 SkyScan query 12:48:21 SkyScan query done: ret=0 az=153.39<-10226 ze=-122.445<-20163 Statuses=0009 0009 12:48:21 Msec=750 True Az=153.39 Ze=-122.445 Az status=0009 Ze status=0009 12:48:21 Check angles 12:48:21 SkyScan query 12:48:21 SkyScan query done: ret=0 az=171.105<-11407 ze=-101.085<-18739 Statuses=0009 0009 12:48:21 Msec=1500 True Az=171.105 Ze=-101.085 Az status=0009 Ze status=0009 12:48:22 Check angles 12:48:22 SkyScan query 12:48:22 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.68<-17312 Statuses=0008 0009 12:48:22 Msec=2250 True Az=176.025 Ze=-79.68 Az status=0008 Ze status=0009 12:48:22 Check angles 12:48:22 SkyScan query 12:48:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.245<-15883 Statuses=0008 0009 12:48:23 Msec=3000 True Az=176.01 Ze=-58.245 Az status=0008 Ze status=0009 12:48:23 Check angles 12:48:23 SkyScan query 12:48:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 12:48:24 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 12:48:24 Message to Master queued w/err=0: serial=65243 error=0 12:48:29 Received message from Master: op=Filter serial=65244 12:48:29 Color wheel filter change from 0 to 0 12:48:29 FLIGetFilterPos err=0 currentPosition=0 12:48:29 FLIGetStepsRemaining err=0 RemainingSteps=0 12:48:29 Filter is already there-color wheel unchanged 12:48:29 Received message from Master: op=Shutter serial=65245 12:48:29 Shutter LASER close 12:48:29 Received message from Camera: op=State serial=65247 12:48:29 GetSingleValue result=40 Value=cccccccc 12:48:29 SkyScan query 12:48:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:48:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:30 Parameters OK 12:48:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:30 Set A/D data flow result=40 12:48:30 Set A/D channel type result=40 12:48:30 Set A/D encoding result=40 12:48:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:30 Set channel filter=0.000000e+000 result=40 12:48:30 Config A/D Result=40 12:48:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:30 Get A/D filter: -9.255963e+061 result=40 12:48:30 Get A/D value=-858993460 result=40 12:48:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:30 Parameters OK 12:48:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:30 Set A/D data flow result=40 12:48:30 Set A/D channel type result=40 12:48:30 Set A/D encoding result=40 12:48:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:30 Set channel filter=0.000000e+000 result=40 12:48:30 Config A/D Result=40 12:48:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:30 Get A/D filter: -9.255963e+061 result=40 12:48:30 Get A/D value=-858993460 result=40 12:48:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:48:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:48:30 Aux= 12:48:30 Message to Camera, serial 65247 queued 12:49:07 Received message from Master: op=PointingHead serial=65260 12:49:07 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:49:07 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:49:07 Point started: ret=0 12:49:07 point_skyscan result=0 12:49:08 Check angles 12:49:08 SkyScan query 12:49:08 SkyScan query done: ret=0 az=153.18<-10212 ze=-22.02<-13468 Statuses=0009 0009 12:49:08 Msec=0 True Az=153.18 Ze=-22.02 Az status=0009 Ze status=0009 12:49:08 Check angles 12:49:08 SkyScan query 12:49:09 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.57<-12038 Statuses=0009 0009 12:49:09 Msec=750 True Az=135.45 Ze=-0.57 Az status=0009 Ze status=0009 12:49:09 Check angles 12:49:09 SkyScan query 12:49:10 SkyScan query done: ret=0 az=117.435<-7829 ze=20.805<-10613 Statuses=0009 0009 12:49:10 Msec=1500 True Az=117.435 Ze=20.805 Az status=0009 Ze status=0009 12:49:10 Check angles 12:49:10 SkyScan query 12:49:10 SkyScan query done: ret=0 az=100.05<-6670 ze=41.76<-9216 Statuses=0009 0009 12:49:10 Msec=2250 True Az=100.05 Ze=41.76 Az status=0009 Ze status=0009 12:49:11 Check angles 12:49:11 SkyScan query 12:49:11 SkyScan query done: ret=0 az=86.07<-5738 ze=51.54<-8564 Statuses=0009 0008 12:49:11 Msec=3000 True Az=86.07 Ze=51.54 Az status=0009 Ze status=0008 12:49:11 Check angles 12:49:11 SkyScan query 12:49:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:49:12 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:49:12 Message to Master queued w/err=0: serial=65260 error=0 12:49:17 Received message from Master: op=Filter serial=65261 12:49:17 Color wheel filter change from 0 to 0 12:49:17 FLIGetFilterPos err=0 currentPosition=0 12:49:17 FLIGetStepsRemaining err=0 RemainingSteps=0 12:49:17 Filter is already there-color wheel unchanged 12:49:17 Received message from Master: op=Shutter serial=65262 12:49:17 Shutter LASER close 12:49:17 Received message from Camera: op=State serial=65264 12:49:17 GetSingleValue result=40 Value=cccccccc 12:49:17 SkyScan query 12:49:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:49:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:18 Parameters OK 12:49:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:18 Set A/D data flow result=40 12:49:18 Set A/D channel type result=40 12:49:18 Set A/D encoding result=40 12:49:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:18 Set channel filter=0.000000e+000 result=40 12:49:18 Config A/D Result=40 12:49:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:18 Get A/D filter: -9.255963e+061 result=40 12:49:18 Get A/D value=-858993460 result=40 12:49:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:18 Parameters OK 12:49:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:18 Set A/D data flow result=40 12:49:18 Set A/D channel type result=40 12:49:18 Set A/D encoding result=40 12:49:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:18 Set channel filter=0.000000e+000 result=40 12:49:18 Config A/D Result=40 12:49:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:18 Get A/D filter: -9.255963e+061 result=40 12:49:18 Get A/D value=-858993460 result=40 12:49:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:49:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:49:18 Aux= 12:49:18 Message to Camera, serial 65264 queued 12:49:54 Received message from Master: op=PointingHead serial=65276 12:49:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:49:54 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:49:54 Point started: ret=0 12:49:54 point_skyscan result=0 12:49:55 Check angles 12:49:55 SkyScan query 12:49:55 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 12:49:55 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 12:49:56 Check angles 12:49:56 SkyScan query 12:49:56 SkyScan query done: ret=0 az=127.02<-8468 ze=38.505<-9433 Statuses=0009 0008 12:49:56 Msec=750 True Az=127.02 Ze=38.505 Az status=0009 Ze status=0008 12:49:56 Check angles 12:49:56 SkyScan query 12:49:57 SkyScan query done: ret=0 az=144.585<-9639 ze=38.505<-9433 Statuses=0009 0008 12:49:57 Msec=1500 True Az=144.585 Ze=38.505 Az status=0009 Ze status=0008 12:49:57 Check angles 12:49:57 SkyScan query 12:49:58 SkyScan query done: ret=0 az=162.03<-10802 ze=38.505<-9433 Statuses=0009 0008 12:49:58 Msec=2250 True Az=162.03 Ze=38.505 Az status=0009 Ze status=0008 12:49:58 Check angles 12:49:58 SkyScan query 12:49:58 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:49:58 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:49:59 Check angles 12:49:59 SkyScan query 12:49:59 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:49:59 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:49:59 Message to Master queued w/err=0: serial=65276 error=0 12:50:04 Received message from Master: op=Filter serial=65277 12:50:04 Color wheel filter change from 0 to 0 12:50:04 FLIGetFilterPos err=0 currentPosition=0 12:50:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:50:04 Filter is already there-color wheel unchanged 12:50:04 Received message from Master: op=Shutter serial=65278 12:50:04 Shutter LASER close 12:50:04 Received message from Camera: op=State serial=65280 12:50:04 GetSingleValue result=40 Value=cccccccc 12:50:04 SkyScan query 12:50:05 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:50:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:05 Parameters OK 12:50:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:05 Set A/D data flow result=40 12:50:05 Set A/D channel type result=40 12:50:05 Set A/D encoding result=40 12:50:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:05 Set channel filter=0.000000e+000 result=40 12:50:05 Config A/D Result=40 12:50:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:05 Get A/D filter: -9.255963e+061 result=40 12:50:05 Get A/D value=-858993460 result=40 12:50:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:05 Parameters OK 12:50:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:05 Set A/D data flow result=40 12:50:05 Set A/D channel type result=40 12:50:05 Set A/D encoding result=40 12:50:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:05 Set channel filter=0.000000e+000 result=40 12:50:05 Config A/D Result=40 12:50:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:05 Get A/D filter: -9.255963e+061 result=40 12:50:05 Get A/D value=-858993460 result=40 12:50:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:50:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:50:05 Aux= 12:50:05 Message to Camera, serial 65280 queued 12:50:42 Received message from Master: op=PointingHead serial=65293 12:50:42 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:50:42 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:50:42 Point started: ret=0 12:50:42 point_skyscan result=0 12:50:43 Check angles 12:50:43 SkyScan query 12:50:43 SkyScan query done: ret=0 az=153.225<-10215 ze=8.955<-11403 Statuses=0009 0009 12:50:43 Msec=0 True Az=153.225 Ze=8.955 Az status=0009 Ze status=0009 12:50:44 Check angles 12:50:44 SkyScan query 12:50:44 SkyScan query done: ret=0 az=135.465<-9031 ze=-12.405<-12827 Statuses=0009 0009 12:50:44 Msec=750 True Az=135.465 Ze=-12.405 Az status=0009 Ze status=0009 12:50:44 Check angles 12:50:44 SkyScan query 12:50:45 SkyScan query done: ret=0 az=117.75<-7850 ze=-33.36<-14224 Statuses=0009 0009 12:50:45 Msec=1500 True Az=117.75 Ze=-33.36 Az status=0009 Ze status=0009 12:50:45 Check angles 12:50:45 SkyScan query 12:50:46 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.54<-15436 Statuses=0009 0009 12:50:46 Msec=2250 True Az=100.425 Ze=-51.54 Az status=0009 Ze status=0009 12:50:46 Check angles 12:50:46 SkyScan query 12:50:47 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.525<-15435 Statuses=0009 0008 12:50:47 Msec=3000 True Az=86.04 Ze=-51.525 Az status=0009 Ze status=0008 12:50:47 Check angles 12:50:47 SkyScan query 12:50:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:50:47 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:50:47 Message to Master queued w/err=0: serial=65293 error=0 12:50:52 Received message from Master: op=Filter serial=65294 12:50:52 Color wheel filter change from 0 to 0 12:50:52 FLIGetFilterPos err=0 currentPosition=0 12:50:52 FLIGetStepsRemaining err=0 RemainingSteps=0 12:50:52 Filter is already there-color wheel unchanged 12:50:52 Received message from Master: op=Shutter serial=65295 12:50:52 Shutter LASER close 12:50:52 Received message from Camera: op=State serial=65297 12:50:52 GetSingleValue result=40 Value=cccccccc 12:50:52 SkyScan query 12:50:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:50:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:53 Parameters OK 12:50:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:53 Set A/D data flow result=40 12:50:53 Set A/D channel type result=40 12:50:53 Set A/D encoding result=40 12:50:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:53 Set channel filter=0.000000e+000 result=40 12:50:53 Config A/D Result=40 12:50:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:53 Get A/D filter: -9.255963e+061 result=40 12:50:53 Get A/D value=-858993460 result=40 12:50:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:53 Parameters OK 12:50:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:53 Set A/D data flow result=40 12:50:53 Set A/D channel type result=40 12:50:53 Set A/D encoding result=40 12:50:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:53 Set channel filter=0.000000e+000 result=40 12:50:53 Config A/D Result=40 12:50:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:53 Get A/D filter: -9.255963e+061 result=40 12:50:53 Get A/D value=-858993460 result=40 12:50:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:50:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:50:53 Aux= 12:50:53 Message to Camera, serial 65297 queued 12:51:30 Received message from Master: op=PointingHead serial=65310 12:51:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:51:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:51:30 Point started: ret=0 12:51:30 point_skyscan result=0 12:51:31 Check angles 12:51:31 SkyScan query 12:51:32 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.255<-17417 Statuses=0009 0009 12:51:32 Msec=0 True Az=108.975 Ze=-81.255 Az status=0009 Ze status=0009 12:51:32 Check angles 12:51:32 SkyScan query 12:51:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.225<-18815 Statuses=0008 0009 12:51:32 Msec=750 True Az=112.995 Ze=-102.225 Az status=0008 Ze status=0009 12:51:32 Check angles 12:51:32 SkyScan query 12:51:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.63<-20242 Statuses=0008 0009 12:51:33 Msec=1500 True Az=112.995 Ze=-123.63 Az status=0008 Ze status=0009 12:51:33 Check angles 12:51:33 SkyScan query 12:51:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.57<-21638 Statuses=0008 0009 12:51:34 Msec=2250 True Az=112.995 Ze=-144.57 Az status=0008 Ze status=0009 12:51:34 Check angles 12:51:34 SkyScan query 12:51:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.525<-23035 Statuses=0008 0009 12:51:35 Msec=3000 True Az=112.995 Ze=-165.525 Az status=0008 Ze status=0009 12:51:35 Check angles 12:51:35 SkyScan query 12:51:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:51:35 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:51:35 Message to Master queued w/err=0: serial=65310 error=0 12:51:40 Received message from Master: op=Filter serial=65311 12:51:40 Color wheel filter change from 0 to 0 12:51:40 FLIGetFilterPos err=0 currentPosition=0 12:51:40 FLIGetStepsRemaining err=0 RemainingSteps=0 12:51:40 Filter is already there-color wheel unchanged 12:51:41 Received message from Master: op=Shutter serial=65312 12:51:41 Shutter LASER open 12:51:41 Received message from Camera: op=State serial=65314 12:51:41 GetSingleValue result=40 Value=cccccccc 12:51:41 SkyScan query 12:51:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:51:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:41 Parameters OK 12:51:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:41 Set A/D data flow result=40 12:51:41 Set A/D channel type result=40 12:51:41 Set A/D encoding result=40 12:51:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:41 Set channel filter=0.000000e+000 result=40 12:51:41 Config A/D Result=40 12:51:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:41 Get A/D filter: -9.255963e+061 result=40 12:51:41 Get A/D value=-858993460 result=40 12:51:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:41 Parameters OK 12:51:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:41 Set A/D data flow result=40 12:51:41 Set A/D channel type result=40 12:51:41 Set A/D encoding result=40 12:51:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:41 Set channel filter=0.000000e+000 result=40 12:51:41 Config A/D Result=40 12:51:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:41 Get A/D filter: -9.255963e+061 result=40 12:51:41 Get A/D value=-858993460 result=40 12:51:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:51:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:51:41 Aux= 12:51:41 Message to Camera, serial 65314 queued 12:51:50 Received message from Master: op=Shutter serial=65324 12:51:50 Shutter LASER close 12:51:50 Received message from Master: op=PointingHead serial=65328 12:51:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:51:50 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:51:50 Point started: ret=0 12:51:50 point_skyscan result=0 12:51:51 Check angles 12:51:51 SkyScan query 12:51:52 SkyScan query done: ret=0 az=89.685<-5979 ze=157.08<-1528 Statuses=0009 0009 12:51:52 Msec=0 True Az=89.685 Ze=157.08 Az status=0009 Ze status=0009 12:51:52 Check angles 12:51:52 SkyScan query 12:51:53 SkyScan query done: ret=0 az=72.225<-4815 ze=136.11<-2926 Statuses=0009 0009 12:51:53 Msec=750 True Az=72.225 Ze=136.11 Az status=0009 Ze status=0009 12:51:53 Check angles 12:51:53 SkyScan query 12:51:53 SkyScan query done: ret=0 az=54.645<-3643 ze=114.69<-4354 Statuses=0009 0009 12:51:53 Msec=1500 True Az=54.645 Ze=114.69 Az status=0009 Ze status=0009 12:51:54 Check angles 12:51:54 SkyScan query 12:51:54 SkyScan query done: ret=0 az=40.92<-2728 ze=93.765<-5749 Statuses=0009 0009 12:51:54 Msec=2250 True Az=40.92 Ze=93.765 Az status=0009 Ze status=0009 12:51:54 Check angles 12:51:54 SkyScan query 12:51:55 SkyScan query done: ret=0 az=40.995<-2733 ze=72.765<-7149 Statuses=0008 0009 12:51:55 Msec=3000 True Az=40.995 Ze=72.765 Az status=0008 Ze status=0009 12:51:55 Check angles 12:51:55 SkyScan query 12:51:56 SkyScan query done: ret=0 az=40.995<-2733 ze=52.455<-8503 Statuses=0008 0009 12:51:56 Msec=3750 True Az=40.995 Ze=52.455 Az status=0008 Ze status=0009 12:51:56 Check angles 12:51:56 SkyScan query 12:51:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:51:56 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:51:56 Message to Master queued w/err=0: serial=65328 error=0 12:52:01 Received message from Master: op=Filter serial=65329 12:52:01 Color wheel filter change from 0 to 0 12:52:01 FLIGetFilterPos err=0 currentPosition=0 12:52:01 FLIGetStepsRemaining err=0 RemainingSteps=0 12:52:01 Filter is already there-color wheel unchanged 12:52:02 Received message from Master: op=Shutter serial=65330 12:52:02 Shutter LASER close 12:52:02 Received message from Camera: op=State serial=65332 12:52:02 GetSingleValue result=40 Value=cccccccc 12:52:02 SkyScan query 12:52:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:52:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:02 Parameters OK 12:52:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:02 Set A/D data flow result=40 12:52:02 Set A/D channel type result=40 12:52:02 Set A/D encoding result=40 12:52:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:02 Set channel filter=0.000000e+000 result=40 12:52:02 Config A/D Result=40 12:52:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:02 Get A/D filter: -9.255963e+061 result=40 12:52:02 Get A/D value=-858993460 result=40 12:52:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:02 Parameters OK 12:52:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:02 Set A/D data flow result=40 12:52:02 Set A/D channel type result=40 12:52:02 Set A/D encoding result=40 12:52:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:02 Set channel filter=0.000000e+000 result=40 12:52:02 Config A/D Result=40 12:52:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:02 Get A/D filter: -9.255963e+061 result=40 12:52:02 Get A/D value=-858993460 result=40 12:52:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:52:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:52:02 Aux= 12:52:02 Message to Camera, serial 65332 queued 12:52:39 Received message from Master: op=PointingHead serial=65345 12:52:39 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:52:39 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:52:39 Point started: ret=0 12:52:39 point_skyscan result=0 12:52:40 Check angles 12:52:40 SkyScan query 12:52:41 SkyScan query done: ret=0 az=63.99<-4266 ze=66.555<-7563 Statuses=0009 0008 12:52:41 Msec=0 True Az=63.99 Ze=66.555 Az status=0009 Ze status=0008 12:52:41 Check angles 12:52:41 SkyScan query 12:52:42 SkyScan query done: ret=0 az=81.75<-5450 ze=66.495<-7567 Statuses=0009 0008 12:52:42 Msec=750 True Az=81.75 Ze=66.495 Az status=0009 Ze status=0008 12:52:42 Check angles 12:52:42 SkyScan query 12:52:42 SkyScan query done: ret=0 az=99.345<-6623 ze=66.495<-7567 Statuses=0009 0008 12:52:42 Msec=1500 True Az=99.345 Ze=66.495 Az status=0009 Ze status=0008 12:52:42 Check angles 12:52:42 SkyScan query 12:52:43 SkyScan query done: ret=0 az=116.865<-7791 ze=66.495<-7567 Statuses=0009 0008 12:52:43 Msec=2250 True Az=116.865 Ze=66.495 Az status=0009 Ze status=0008 12:52:43 Check angles 12:52:43 SkyScan query 12:52:44 SkyScan query done: ret=0 az=134.34<-8956 ze=66.495<-7567 Statuses=0009 0008 12:52:44 Msec=3000 True Az=134.34 Ze=66.495 Az status=0009 Ze status=0008 12:52:44 Check angles 12:52:44 SkyScan query 12:52:45 SkyScan query done: ret=0 az=151.755<-10117 ze=66.495<-7567 Statuses=0009 0008 12:52:45 Msec=3750 True Az=151.755 Ze=66.495 Az status=0009 Ze status=0008 12:52:45 Check angles 12:52:45 SkyScan query 12:52:45 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 12:52:45 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 12:52:45 Message to Master queued w/err=0: serial=65345 error=0 12:52:50 Received message from Master: op=Filter serial=65346 12:52:50 Color wheel filter change from 0 to 0 12:52:50 FLIGetFilterPos err=0 currentPosition=0 12:52:50 FLIGetStepsRemaining err=0 RemainingSteps=0 12:52:50 Filter is already there-color wheel unchanged 12:52:50 Received message from Master: op=Shutter serial=65347 12:52:50 Shutter LASER close 12:52:51 Received message from Camera: op=State serial=65349 12:52:51 GetSingleValue result=40 Value=cccccccc 12:52:51 SkyScan query 12:52:51 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:52:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:51 Parameters OK 12:52:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:51 Set A/D data flow result=40 12:52:51 Set A/D channel type result=40 12:52:51 Set A/D encoding result=40 12:52:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:51 Set channel filter=0.000000e+000 result=40 12:52:51 Config A/D Result=40 12:52:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:51 Get A/D filter: -9.255963e+061 result=40 12:52:51 Get A/D value=-858993460 result=40 12:52:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:51 Parameters OK 12:52:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:51 Set A/D data flow result=40 12:52:51 Set A/D channel type result=40 12:52:51 Set A/D encoding result=40 12:52:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:51 Set channel filter=0.000000e+000 result=40 12:52:51 Config A/D Result=40 12:52:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:51 Get A/D filter: -9.255963e+061 result=40 12:52:51 Get A/D value=-858993460 result=40 12:52:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:51 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:52:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:52:51 Aux= 12:52:51 Message to Camera, serial 65349 queued 12:53:28 Received message from Master: op=PointingHead serial=65362 12:53:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:53:28 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:53:28 Point started: ret=0 12:53:28 point_skyscan result=0 12:53:29 Check angles 12:53:29 SkyScan query 12:53:30 SkyScan query done: ret=0 az=134.775<-8985 ze=36.465<-9569 Statuses=0009 0009 12:53:30 Msec=0 True Az=134.775 Ze=36.465 Az status=0009 Ze status=0009 12:53:30 Check angles 12:53:30 SkyScan query 12:53:30 SkyScan query done: ret=0 az=117.255<-7817 ze=15.54<-10964 Statuses=0009 0009 12:53:30 Msec=750 True Az=117.255 Ze=15.54 Az status=0009 Ze status=0009 12:53:31 Check angles 12:53:31 SkyScan query 12:53:31 SkyScan query done: ret=0 az=99.87<-6658 ze=-5.445<-12363 Statuses=0009 0009 12:53:31 Msec=1500 True Az=99.87 Ze=-5.445 Az status=0009 Ze status=0009 12:53:31 Check angles 12:53:31 SkyScan query 12:53:32 SkyScan query done: ret=0 az=82.41<-5494 ze=-26.4<-13760 Statuses=0009 0009 12:53:32 Msec=2250 True Az=82.41 Ze=-26.4 Az status=0009 Ze status=0009 12:53:32 Check angles 12:53:32 SkyScan query 12:53:33 SkyScan query done: ret=0 az=64.845<-4323 ze=-38.58<-14572 Statuses=0009 0008 12:53:33 Msec=3000 True Az=64.845 Ze=-38.58 Az status=0009 Ze status=0008 12:53:33 Check angles 12:53:33 SkyScan query 12:53:33 SkyScan query done: ret=0 az=47.37<-3158 ze=-38.535<-14569 Statuses=0009 0008 12:53:33 Msec=3750 True Az=47.37 Ze=-38.535 Az status=0009 Ze status=0008 12:53:34 Check angles 12:53:34 SkyScan query 12:53:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:53:34 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:53:34 Message to Master queued w/err=0: serial=65362 error=0 12:53:39 Received message from Master: op=Filter serial=65363 12:53:39 Color wheel filter change from 0 to 0 12:53:39 FLIGetFilterPos err=0 currentPosition=0 12:53:39 FLIGetStepsRemaining err=0 RemainingSteps=0 12:53:39 Filter is already there-color wheel unchanged 12:53:39 Received message from Master: op=Shutter serial=65364 12:53:39 Shutter LASER close 12:53:39 Received message from Camera: op=State serial=65366 12:53:39 GetSingleValue result=40 Value=cccccccc 12:53:39 SkyScan query 12:53:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:53:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:40 Parameters OK 12:53:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:40 Set A/D data flow result=40 12:53:40 Set A/D channel type result=40 12:53:40 Set A/D encoding result=40 12:53:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:40 Set channel filter=0.000000e+000 result=40 12:53:40 Config A/D Result=40 12:53:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:40 Get A/D filter: -9.255963e+061 result=40 12:53:40 Get A/D value=-858993460 result=40 12:53:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:40 Parameters OK 12:53:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:40 Set A/D data flow result=40 12:53:40 Set A/D channel type result=40 12:53:40 Set A/D encoding result=40 12:53:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:40 Set channel filter=0.000000e+000 result=40 12:53:40 Config A/D Result=40 12:53:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:40 Get A/D filter: -9.255963e+061 result=40 12:53:40 Get A/D value=-858993460 result=40 12:53:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:53:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:53:40 Aux= 12:53:40 Message to Camera, serial 65366 queued 12:54:17 Received message from Master: op=PointingHead serial=65379 12:54:17 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:54:17 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:54:17 Point started: ret=0 12:54:17 point_skyscan result=0 12:54:18 Check angles 12:54:18 SkyScan query 12:54:18 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.025<-16535 Statuses=0009 0009 12:54:18 Msec=0 True Az=63.78 Ze=-68.025 Az status=0009 Ze status=0009 12:54:19 Check angles 12:54:19 SkyScan query 12:54:19 SkyScan query done: ret=0 az=81.12<-5408 ze=-89.01<-17934 Statuses=0009 0009 12:54:19 Msec=750 True Az=81.12 Ze=-89.01 Az status=0009 Ze status=0009 12:54:19 Check angles 12:54:19 SkyScan query 12:54:20 SkyScan query done: ret=0 az=99.03<-6602 ze=-110.415<-19361 Statuses=0009 0009 12:54:20 Msec=1500 True Az=99.03 Ze=-110.415 Az status=0009 Ze status=0009 12:54:20 Check angles 12:54:20 SkyScan query 12:54:21 SkyScan query done: ret=0 az=116.73<-7782 ze=-131.37<-20758 Statuses=0009 0009 12:54:21 Msec=2250 True Az=116.73 Ze=-131.37 Az status=0009 Ze status=0009 12:54:21 Check angles 12:54:21 SkyScan query 12:54:21 SkyScan query done: ret=0 az=131.19<-8746 ze=-141.54<-21436 Statuses=0009 0008 12:54:21 Msec=3000 True Az=131.19 Ze=-141.54 Az status=0009 Ze status=0008 12:54:22 Check angles 12:54:22 SkyScan query 12:54:22 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:54:22 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:54:22 Message to Master queued w/err=0: serial=65379 error=0 12:54:27 Received message from Master: op=Filter serial=65380 12:54:27 Color wheel filter change from 0 to 0 12:54:27 FLIGetFilterPos err=0 currentPosition=0 12:54:27 FLIGetStepsRemaining err=0 RemainingSteps=0 12:54:27 Filter is already there-color wheel unchanged 12:54:27 Received message from Master: op=Shutter serial=65381 12:54:27 Shutter LASER close 12:54:27 Received message from Camera: op=State serial=65383 12:54:27 GetSingleValue result=40 Value=cccccccc 12:54:27 SkyScan query 12:54:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:54:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:28 Parameters OK 12:54:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:28 Set A/D data flow result=40 12:54:28 Set A/D channel type result=40 12:54:28 Set A/D encoding result=40 12:54:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:28 Set channel filter=0.000000e+000 result=40 12:54:28 Config A/D Result=40 12:54:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:28 Get A/D filter: -9.255963e+061 result=40 12:54:28 Get A/D value=-858993460 result=40 12:54:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:28 Parameters OK 12:54:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:28 Set A/D data flow result=40 12:54:28 Set A/D channel type result=40 12:54:28 Set A/D encoding result=40 12:54:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:28 Set channel filter=0.000000e+000 result=40 12:54:28 Config A/D Result=40 12:54:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:28 Get A/D filter: -9.255963e+061 result=40 12:54:28 Get A/D value=-858993460 result=40 12:54:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:28 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:54:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:54:28 Aux= 12:54:28 Message to Camera, serial 65383 queued 12:55:04 Received message from Master: op=PointingHead serial=65395 12:55:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:55:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:55:04 Point started: ret=0 12:55:04 point_skyscan result=0 12:55:05 Check angles 12:55:05 SkyScan query 12:55:06 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 12:55:06 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 12:55:06 Check angles 12:55:06 SkyScan query 12:55:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:55:06 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:55:06 Message to Master queued w/err=0: serial=65395 error=0 12:55:11 Received message from Master: op=Filter serial=65396 12:55:11 Color wheel filter change from 0 to 0 12:55:11 FLIGetFilterPos err=0 currentPosition=0 12:55:11 FLIGetStepsRemaining err=0 RemainingSteps=0 12:55:11 Filter is already there-color wheel unchanged 12:55:11 Received message from Master: op=Shutter serial=65397 12:55:11 Shutter LASER open 12:55:12 Received message from Camera: op=State serial=65399 12:55:12 GetSingleValue result=40 Value=cccccccc 12:55:12 SkyScan query 12:55:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:55:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:12 Parameters OK 12:55:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:12 Set A/D data flow result=40 12:55:12 Set A/D channel type result=40 12:55:12 Set A/D encoding result=40 12:55:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:12 Set channel filter=0.000000e+000 result=40 12:55:12 Config A/D Result=40 12:55:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:12 Get A/D filter: -9.255963e+061 result=40 12:55:12 Get A/D value=-858993460 result=40 12:55:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:12 Parameters OK 12:55:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:12 Set A/D data flow result=40 12:55:12 Set A/D channel type result=40 12:55:12 Set A/D encoding result=40 12:55:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:12 Set channel filter=0.000000e+000 result=40 12:55:12 Config A/D Result=40 12:55:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:12 Get A/D filter: -9.255963e+061 result=40 12:55:12 Get A/D value=-858993460 result=40 12:55:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:55:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:55:12 Aux= 12:55:12 Message to Camera, serial 65399 queued 12:55:21 Received message from Master: op=Shutter serial=65409 12:55:21 Shutter LASER close 12:55:21 Received message from Master: op=PointingHead serial=65413 12:55:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:55:21 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:55:22 Point started: ret=0 12:55:22 point_skyscan result=0 12:55:22 Check angles 12:55:22 SkyScan query 12:55:23 SkyScan query done: ret=0 az=136.14<-9076 ze=-143.04<-21536 Statuses=0009 0009 12:55:23 Msec=0 True Az=136.14 Ze=-143.04 Az status=0009 Ze status=0009 12:55:23 Check angles 12:55:23 SkyScan query 12:55:24 SkyScan query done: ret=0 az=153.66<-10244 ze=-122.055<-20137 Statuses=0009 0009 12:55:24 Msec=750 True Az=153.66 Ze=-122.055 Az status=0009 Ze status=0009 12:55:24 Check angles 12:55:24 SkyScan query 12:55:24 SkyScan query done: ret=0 az=171.03<-11402 ze=-101.16<-18744 Statuses=0009 0009 12:55:24 Msec=1500 True Az=171.03 Ze=-101.16 Az status=0009 Ze status=0009 12:55:25 Check angles 12:55:25 SkyScan query 12:55:25 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.22<-17348 Statuses=0008 0009 12:55:25 Msec=2250 True Az=176.025 Ze=-80.22 Az status=0008 Ze status=0009 12:55:25 Check angles 12:55:25 SkyScan query 12:55:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.25<-15950 Statuses=0008 0009 12:55:26 Msec=3000 True Az=175.995 Ze=-59.25 Az status=0008 Ze status=0009 12:55:26 Check angles 12:55:26 SkyScan query 12:55:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:55:27 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:55:27 Message to Master queued w/err=0: serial=65413 error=0 12:55:32 Received message from Master: op=Filter serial=65414 12:55:32 Color wheel filter change from 0 to 0 12:55:32 FLIGetFilterPos err=0 currentPosition=0 12:55:32 FLIGetStepsRemaining err=0 RemainingSteps=0 12:55:32 Filter is already there-color wheel unchanged 12:55:32 Received message from Master: op=Shutter serial=65415 12:55:32 Shutter LASER close 12:55:32 Received message from Camera: op=State serial=65417 12:55:32 GetSingleValue result=40 Value=cccccccc [UTC 2018-12-11 12:55:32] 12:55:32 SkyScan query 12:55:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:55:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:33 Parameters OK 12:55:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:33 Set A/D data flow result=40 12:55:33 Set A/D channel type result=40 12:55:33 Set A/D encoding result=40 12:55:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:33 Set channel filter=0.000000e+000 result=40 12:55:33 Config A/D Result=40 12:55:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:33 Get A/D filter: -9.255963e+061 result=40 12:55:33 Get A/D value=-858993460 result=40 12:55:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:33 Parameters OK 12:55:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:33 Set A/D data flow result=40 12:55:33 Set A/D channel type result=40 12:55:33 Set A/D encoding result=40 12:55:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:33 Set channel filter=0.000000e+000 result=40 12:55:33 Config A/D Result=40 12:55:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:33 Get A/D filter: -9.255963e+061 result=40 12:55:33 Get A/D value=-858993460 result=40 12:55:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:55:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:55:33 Aux= 12:55:33 Message to Camera, serial 65417 queued [UTC 2018-12-11 12:55:54] 12:56:09 Received message from Master: op=PointingHead serial=65430 12:56:09 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:56:09 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:56:10 Point started: ret=0 12:56:10 point_skyscan result=0 12:56:10 Check angles 12:56:10 SkyScan query 12:56:11 SkyScan query done: ret=0 az=152.805<-10187 ze=-21.645<-13443 Statuses=0009 0009 12:56:11 Msec=0 True Az=152.805 Ze=-21.645 Az status=0009 Ze status=0009 12:56:11 Check angles 12:56:11 SkyScan query 12:56:12 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.225<-12015 Statuses=0009 0009 12:56:12 Msec=750 True Az=135.09 Ze=-0.225 Az status=0009 Ze status=0009 12:56:12 Check angles 12:56:12 SkyScan query 12:56:13 SkyScan query done: ret=0 az=117.51<-7834 ze=20.715<-10619 Statuses=0009 0009 12:56:13 Msec=1500 True Az=117.51 Ze=20.715 Az status=0009 Ze status=0009 12:56:13 Check angles 12:56:13 SkyScan query 12:56:13 SkyScan query done: ret=0 az=100.08<-6672 ze=41.7<-9220 Statuses=0009 0009 12:56:13 Msec=2250 True Az=100.08 Ze=41.7 Az status=0009 Ze status=0009 12:56:14 Check angles 12:56:14 SkyScan query 12:56:14 SkyScan query done: ret=0 az=86.07<-5738 ze=51.57<-8562 Statuses=0009 0008 12:56:14 Msec=3000 True Az=86.07 Ze=51.57 Az status=0009 Ze status=0008 12:56:14 Check angles 12:56:14 SkyScan query 12:56:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:56:15 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 12:56:15 Message to Master queued w/err=0: serial=65430 error=0 12:56:20 Received message from Master: op=Filter serial=65431 12:56:20 Color wheel filter change from 0 to 0 12:56:20 FLIGetFilterPos err=0 currentPosition=0 12:56:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:56:20 Filter is already there-color wheel unchanged 12:56:20 Received message from Master: op=Shutter serial=65432 12:56:20 Shutter LASER close 12:56:20 Received message from Camera: op=State serial=65434 12:56:20 GetSingleValue result=40 Value=cccccccc 12:56:20 SkyScan query 12:56:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:56:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:21 Parameters OK 12:56:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:21 Set A/D data flow result=40 12:56:21 Set A/D channel type result=40 12:56:21 Set A/D encoding result=40 12:56:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:21 Set channel filter=0.000000e+000 result=40 12:56:21 Config A/D Result=40 12:56:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:21 Get A/D filter: -9.255963e+061 result=40 12:56:21 Get A/D value=-858993460 result=40 12:56:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:21 Parameters OK 12:56:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:21 Set A/D data flow result=40 12:56:21 Set A/D channel type result=40 12:56:21 Set A/D encoding result=40 12:56:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:21 Set channel filter=0.000000e+000 result=40 12:56:21 Config A/D Result=40 12:56:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:21 Get A/D filter: -9.255963e+061 result=40 12:56:21 Get A/D value=-858993460 result=40 12:56:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:56:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:56:21 Aux= 12:56:21 Message to Camera, serial 65434 queued 12:56:57 Received message from Master: op=PointingHead serial=65447 12:56:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:56:57 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:56:58 Point started: ret=0 12:56:58 point_skyscan result=0 12:56:59 Check angles 12:56:59 SkyScan query 12:56:59 SkyScan query done: ret=0 az=109.05<-7270 ze=38.49<-9434 Statuses=0009 0008 12:56:59 Msec=0 True Az=109.05 Ze=38.49 Az status=0009 Ze status=0008 12:56:59 Check angles 12:56:59 SkyScan query 12:57:00 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 12:57:00 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 12:57:00 Check angles 12:57:00 SkyScan query 12:57:01 SkyScan query done: ret=0 az=144.165<-9611 ze=38.505<-9433 Statuses=0009 0008 12:57:01 Msec=1500 True Az=144.165 Ze=38.505 Az status=0009 Ze status=0008 12:57:01 Check angles 12:57:01 SkyScan query 12:57:01 SkyScan query done: ret=0 az=161.475<-10765 ze=38.505<-9433 Statuses=0009 0008 12:57:01 Msec=2250 True Az=161.475 Ze=38.505 Az status=0009 Ze status=0008 12:57:02 Check angles 12:57:02 SkyScan query 12:57:02 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 12:57:02 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 12:57:02 Check angles 12:57:02 SkyScan query 12:57:03 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:57:03 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:57:03 Message to Master queued w/err=0: serial=65447 error=0 12:57:08 Received message from Master: op=Filter serial=65448 12:57:08 Color wheel filter change from 0 to 0 12:57:08 FLIGetFilterPos err=0 currentPosition=0 12:57:08 FLIGetStepsRemaining err=0 RemainingSteps=0 12:57:08 Filter is already there-color wheel unchanged 12:57:08 Received message from Master: op=Shutter serial=65449 12:57:08 Shutter LASER close 12:57:08 Received message from Camera: op=State serial=65451 12:57:08 GetSingleValue result=40 Value=cccccccc 12:57:08 SkyScan query 12:57:09 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:57:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:09 Parameters OK 12:57:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:09 Set A/D data flow result=40 12:57:09 Set A/D channel type result=40 12:57:09 Set A/D encoding result=40 12:57:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:09 Set channel filter=0.000000e+000 result=40 12:57:09 Config A/D Result=40 12:57:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:09 Get A/D filter: -9.255963e+061 result=40 12:57:09 Get A/D value=-858993460 result=40 12:57:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:09 Parameters OK 12:57:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:09 Set A/D data flow result=40 12:57:09 Set A/D channel type result=40 12:57:09 Set A/D encoding result=40 12:57:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:09 Set channel filter=0.000000e+000 result=40 12:57:09 Config A/D Result=40 12:57:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:09 Get A/D filter: -9.255963e+061 result=40 12:57:09 Get A/D value=-858993460 result=40 12:57:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:57:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:57:09 Aux= 12:57:09 Message to Camera, serial 65451 queued 12:57:46 Received message from Master: op=PointingHead serial=65464 12:57:46 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:57:46 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:57:46 Point started: ret=0 12:57:46 point_skyscan result=0 12:57:47 Check angles 12:57:47 SkyScan query 12:57:47 SkyScan query done: ret=0 az=152.955<-10197 ze=8.655<-11423 Statuses=0009 0009 12:57:47 Msec=0 True Az=152.955 Ze=8.655 Az status=0009 Ze status=0009 12:57:47 Check angles 12:57:47 SkyScan query 12:57:48 SkyScan query done: ret=0 az=135.24<-9016 ze=-12.705<-12847 Statuses=0009 0009 12:57:48 Msec=750 True Az=135.24 Ze=-12.705 Az status=0009 Ze status=0009 12:57:48 Check angles 12:57:48 SkyScan query 12:57:49 SkyScan query done: ret=0 az=117.225<-7815 ze=-34.14<-14276 Statuses=0009 0009 12:57:49 Msec=1500 True Az=117.225 Ze=-34.14 Az status=0009 Ze status=0009 12:57:49 Check angles 12:57:49 SkyScan query 12:57:49 SkyScan query done: ret=0 az=99.93<-6662 ze=-51.57<-15438 Statuses=0009 0009 12:57:49 Msec=2250 True Az=99.93 Ze=-51.57 Az status=0009 Ze status=0009 12:57:50 Check angles 12:57:50 SkyScan query 12:57:50 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.525<-15435 Statuses=0009 0008 12:57:50 Msec=3000 True Az=86.025 Ze=-51.525 Az status=0009 Ze status=0008 12:57:50 Check angles 12:57:50 SkyScan query 12:57:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:57:51 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:57:51 Message to Master queued w/err=0: serial=65464 error=0 12:57:56 Received message from Master: op=Filter serial=65465 12:57:56 Color wheel filter change from 0 to 0 12:57:56 FLIGetFilterPos err=0 currentPosition=0 12:57:56 FLIGetStepsRemaining err=0 RemainingSteps=0 12:57:56 Filter is already there-color wheel unchanged 12:57:56 Received message from Master: op=Shutter serial=65466 12:57:56 Shutter LASER close 12:57:56 Received message from Camera: op=State serial=65468 12:57:56 GetSingleValue result=40 Value=cccccccc 12:57:56 SkyScan query 12:57:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:57:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:57 Parameters OK 12:57:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:57 Set A/D data flow result=40 12:57:57 Set A/D channel type result=40 12:57:57 Set A/D encoding result=40 12:57:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:57 Set channel filter=0.000000e+000 result=40 12:57:57 Config A/D Result=40 12:57:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:57 Get A/D filter: -9.255963e+061 result=40 12:57:57 Get A/D value=-858993460 result=40 12:57:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:57 Parameters OK 12:57:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:57 Set A/D data flow result=40 12:57:57 Set A/D channel type result=40 12:57:57 Set A/D encoding result=40 12:57:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:57 Set channel filter=0.000000e+000 result=40 12:57:57 Config A/D Result=40 12:57:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:57 Get A/D filter: -9.255963e+061 result=40 12:57:57 Get A/D value=-858993460 result=40 12:57:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:57:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:57:57 Aux= 12:57:57 Message to Camera, serial 65468 queued 12:58:34 Received message from Master: op=PointingHead serial=65481 12:58:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:58:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:58:34 Point started: ret=0 12:58:34 point_skyscan result=0 12:58:35 Check angles 12:58:35 SkyScan query 12:58:35 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.24<-17416 Statuses=0009 0009 12:58:35 Msec=0 True Az=108.9 Ze=-81.24 Az status=0009 Ze status=0009 12:58:35 Check angles 12:58:35 SkyScan query 12:58:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.195<-18813 Statuses=0008 0009 12:58:36 Msec=750 True Az=112.995 Ze=-102.195 Az status=0008 Ze status=0009 12:58:36 Check angles 12:58:36 SkyScan query 12:58:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.15<-20210 Statuses=0008 0009 12:58:37 Msec=1500 True Az=112.995 Ze=-123.15 Az status=0008 Ze status=0009 12:58:37 Check angles 12:58:37 SkyScan query 12:58:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.12<-21608 Statuses=0008 0009 12:58:38 Msec=2250 True Az=112.995 Ze=-144.12 Az status=0008 Ze status=0009 12:58:38 Check angles 12:58:38 SkyScan query 12:58:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.075<-23005 Statuses=0008 0009 12:58:38 Msec=3000 True Az=112.995 Ze=-165.075 Az status=0008 Ze status=0009 12:58:38 Check angles 12:58:38 SkyScan query 12:58:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:58:39 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:58:39 Message to Master queued w/err=0: serial=65481 error=0 12:58:44 Received message from Master: op=Filter serial=65482 12:58:44 Color wheel filter change from 0 to 0 12:58:44 FLIGetFilterPos err=0 currentPosition=0 12:58:44 FLIGetStepsRemaining err=0 RemainingSteps=0 12:58:44 Filter is already there-color wheel unchanged 12:58:44 Received message from Master: op=Shutter serial=65483 12:58:44 Shutter LASER open 12:58:44 Received message from Camera: op=State serial=65485 12:58:44 GetSingleValue result=40 Value=cccccccc 12:58:44 SkyScan query 12:58:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:58:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:45 Parameters OK 12:58:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:45 Set A/D data flow result=40 12:58:45 Set A/D channel type result=40 12:58:45 Set A/D encoding result=40 12:58:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:45 Set channel filter=0.000000e+000 result=40 12:58:45 Config A/D Result=40 12:58:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:45 Get A/D filter: -9.255963e+061 result=40 12:58:45 Get A/D value=-858993460 result=40 12:58:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:45 Parameters OK 12:58:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:45 Set A/D data flow result=40 12:58:45 Set A/D channel type result=40 12:58:45 Set A/D encoding result=40 12:58:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:45 Set channel filter=0.000000e+000 result=40 12:58:45 Config A/D Result=40 12:58:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:45 Get A/D filter: -9.255963e+061 result=40 12:58:45 Get A/D value=-858993460 result=40 12:58:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:58:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:58:45 Aux= 12:58:45 Message to Camera, serial 65485 queued 12:58:53 Received message from Master: op=Shutter serial=65495 12:58:53 Shutter LASER close 12:58:54 Received message from Master: op=PointingHead serial=65499 12:58:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:58:54 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:58:54 Point started: ret=0 12:58:54 point_skyscan result=0 12:58:55 Check angles 12:58:55 SkyScan query 12:58:56 SkyScan query done: ret=0 az=89.895<-5993 ze=157.56<-1496 Statuses=0009 0009 12:58:56 Msec=0 True Az=89.895 Ze=157.56 Az status=0009 Ze status=0009 12:58:56 Check angles 12:58:56 SkyScan query 12:58:56 SkyScan query done: ret=0 az=72.555<-4837 ze=136.545<-2897 Statuses=0009 0009 12:58:56 Msec=750 True Az=72.555 Ze=136.545 Az status=0009 Ze status=0009 12:58:57 Check angles 12:58:57 SkyScan query 12:58:57 SkyScan query done: ret=0 az=54.84<-3656 ze=115.215<-4319 Statuses=0009 0009 12:58:57 Msec=1500 True Az=54.84 Ze=115.215 Az status=0009 Ze status=0009 12:58:57 Check angles 12:58:57 SkyScan query 12:58:58 SkyScan query done: ret=0 az=40.89<-2726 ze=94.215<-5719 Statuses=0009 0009 12:58:58 Msec=2250 True Az=40.89 Ze=94.215 Az status=0009 Ze status=0009 12:58:58 Check angles 12:58:58 SkyScan query 12:58:59 SkyScan query done: ret=0 az=40.995<-2733 ze=73.275<-7115 Statuses=0008 0009 12:58:59 Msec=3000 True Az=40.995 Ze=73.275 Az status=0008 Ze status=0009 12:58:59 Check angles 12:58:59 SkyScan query 12:58:59 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 12:58:59 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 12:59:00 Check angles 12:59:00 SkyScan query 12:59:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:59:00 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:59:00 Message to Master queued w/err=0: serial=65499 error=0 12:59:05 Received message from Master: op=Filter serial=65500 12:59:05 Color wheel filter change from 0 to 0 12:59:05 FLIGetFilterPos err=0 currentPosition=0 12:59:05 FLIGetStepsRemaining err=0 RemainingSteps=0 12:59:05 Filter is already there-color wheel unchanged 12:59:05 Received message from Master: op=Shutter serial=65501 12:59:05 Shutter LASER close 12:59:05 Received message from Camera: op=State serial=65503 12:59:05 GetSingleValue result=40 Value=cccccccc 12:59:05 SkyScan query 12:59:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:59:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:06 Parameters OK 12:59:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:06 Set A/D data flow result=40 12:59:06 Set A/D channel type result=40 12:59:06 Set A/D encoding result=40 12:59:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:06 Set channel filter=0.000000e+000 result=40 12:59:06 Config A/D Result=40 12:59:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:06 Get A/D filter: -9.255963e+061 result=40 12:59:06 Get A/D value=-858993460 result=40 12:59:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:06 Parameters OK 12:59:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:06 Set A/D data flow result=40 12:59:06 Set A/D channel type result=40 12:59:06 Set A/D encoding result=40 12:59:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:06 Set channel filter=0.000000e+000 result=40 12:59:06 Config A/D Result=40 12:59:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:06 Get A/D filter: -9.255963e+061 result=40 12:59:06 Get A/D value=-858993460 result=40 12:59:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:59:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:59:06 Aux= 12:59:06 Message to Camera, serial 65503 queued 12:59:43 Received message from Master: op=PointingHead serial=65516 12:59:43 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:59:43 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:59:43 Point started: ret=0 12:59:43 point_skyscan result=0 12:59:44 Check angles 12:59:44 SkyScan query 12:59:45 SkyScan query done: ret=0 az=63.87<-4258 ze=66.54<-7564 Statuses=0009 0008 12:59:45 Msec=0 True Az=63.87 Ze=66.54 Az status=0009 Ze status=0008 12:59:45 Check angles 12:59:45 SkyScan query 12:59:45 SkyScan query done: ret=0 az=81.63<-5442 ze=66.51<-7566 Statuses=0009 0008 12:59:45 Msec=750 True Az=81.63 Ze=66.51 Az status=0009 Ze status=0008 12:59:45 Check angles 12:59:45 SkyScan query 12:59:46 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 12:59:46 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 12:59:46 Check angles 12:59:46 SkyScan query 12:59:47 SkyScan query done: ret=0 az=116.745<-7783 ze=66.495<-7567 Statuses=0009 0008 12:59:47 Msec=2250 True Az=116.745 Ze=66.495 Az status=0009 Ze status=0008 12:59:47 Check angles 12:59:47 SkyScan query 12:59:48 SkyScan query done: ret=0 az=134.31<-8954 ze=66.495<-7567 Statuses=0009 0008 12:59:48 Msec=3000 True Az=134.31 Ze=66.495 Az status=0009 Ze status=0008 12:59:48 Check angles 12:59:48 SkyScan query 12:59:48 SkyScan query done: ret=0 az=151.695<-10113 ze=66.495<-7567 Statuses=0009 0008 12:59:48 Msec=3750 True Az=151.695 Ze=66.495 Az status=0009 Ze status=0008 12:59:48 Check angles 12:59:48 SkyScan query 12:59:49 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:59:49 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 12:59:49 Message to Master queued w/err=0: serial=65516 error=0 12:59:54 Received message from Master: op=Filter serial=65517 12:59:54 Color wheel filter change from 0 to 0 12:59:54 FLIGetFilterPos err=0 currentPosition=0 12:59:54 FLIGetStepsRemaining err=0 RemainingSteps=0 12:59:54 Filter is already there-color wheel unchanged 12:59:54 Received message from Master: op=Shutter serial=65518 12:59:54 Shutter LASER close 12:59:54 Received message from Camera: op=State serial=65520 12:59:54 GetSingleValue result=40 Value=cccccccc 12:59:54 SkyScan query 12:59:55 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:59:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:55 Parameters OK 12:59:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:55 Set A/D data flow result=40 12:59:55 Set A/D channel type result=40 12:59:55 Set A/D encoding result=40 12:59:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:55 Set channel filter=0.000000e+000 result=40 12:59:55 Config A/D Result=40 12:59:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:55 Get A/D filter: -9.255963e+061 result=40 12:59:55 Get A/D value=-858993460 result=40 12:59:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:55 Parameters OK 12:59:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:55 Set A/D data flow result=40 12:59:55 Set A/D channel type result=40 12:59:55 Set A/D encoding result=40 12:59:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:55 Set channel filter=0.000000e+000 result=40 12:59:55 Config A/D Result=40 12:59:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:55 Get A/D filter: -9.255963e+061 result=40 12:59:55 Get A/D value=-858993460 result=40 12:59:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:55 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:59:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:59:55 Aux= 12:59:55 Message to Camera, serial 65520 queued 13:00:32 Received message from Master: op=PointingHead serial=65533 13:00:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:00:32 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:00:32 Point started: ret=0 13:00:32 point_skyscan result=0 13:00:33 Check angles 13:00:33 SkyScan query 13:00:33 SkyScan query done: ret=0 az=134.82<-8988 ze=36.54<-9564 Statuses=0009 0009 13:00:33 Msec=0 True Az=134.82 Ze=36.54 Az status=0009 Ze status=0009 13:00:34 Check angles 13:00:34 SkyScan query 13:00:34 SkyScan query done: ret=0 az=117.27<-7818 ze=15.615<-10959 Statuses=0009 0009 13:00:34 Msec=750 True Az=117.27 Ze=15.615 Az status=0009 Ze status=0009 13:00:34 Check angles 13:00:34 SkyScan query 13:00:35 SkyScan query done: ret=0 az=99.975<-6665 ze=-5.385<-12359 Statuses=0009 0009 13:00:35 Msec=1500 True Az=99.975 Ze=-5.385 Az status=0009 Ze status=0009 13:00:35 Check angles 13:00:35 SkyScan query 13:00:36 SkyScan query done: ret=0 az=82.14<-5476 ze=-26.76<-13784 Statuses=0009 0009 13:00:36 Msec=2250 True Az=82.14 Ze=-26.76 Az status=0009 Ze status=0009 13:00:36 Check angles 13:00:36 SkyScan query 13:00:36 SkyScan query done: ret=0 az=64.59<-4306 ze=-38.565<-14571 Statuses=0009 0008 13:00:36 Msec=3000 True Az=64.59 Ze=-38.565 Az status=0009 Ze status=0008 13:00:37 Check angles 13:00:37 SkyScan query 13:00:37 SkyScan query done: ret=0 az=47.13<-3142 ze=-38.535<-14569 Statuses=0009 0008 13:00:37 Msec=3750 True Az=47.13 Ze=-38.535 Az status=0009 Ze status=0008 13:00:37 Check angles 13:00:37 SkyScan query 13:00:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:00:38 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:00:38 Message to Master queued w/err=0: serial=65533 error=0 13:00:43 Received message from Master: op=Filter serial=65534 13:00:43 Color wheel filter change from 0 to 0 13:00:43 FLIGetFilterPos err=0 currentPosition=0 13:00:43 FLIGetStepsRemaining err=0 RemainingSteps=0 13:00:43 Filter is already there-color wheel unchanged 13:00:43 Received message from Master: op=Shutter serial=65535 13:00:43 Shutter LASER close 13:00:43 Received message from Camera: op=State serial=65537 13:00:43 GetSingleValue result=40 Value=cccccccc 13:00:43 SkyScan query 13:00:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:00:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:44 Parameters OK 13:00:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:44 Set A/D data flow result=40 13:00:44 Set A/D channel type result=40 13:00:44 Set A/D encoding result=40 13:00:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:44 Set channel filter=0.000000e+000 result=40 13:00:44 Config A/D Result=40 13:00:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:44 Get A/D filter: -9.255963e+061 result=40 13:00:44 Get A/D value=-858993460 result=40 13:00:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:44 Parameters OK 13:00:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:44 Set A/D data flow result=40 13:00:44 Set A/D channel type result=40 13:00:44 Set A/D encoding result=40 13:00:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:44 Set channel filter=0.000000e+000 result=40 13:00:44 Config A/D Result=40 13:00:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:44 Get A/D filter: -9.255963e+061 result=40 13:00:44 Get A/D value=-858993460 result=40 13:00:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:00:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:00:44 Aux= 13:00:44 Message to Camera, serial 65537 queued 13:01:20 Received message from Master: op=PointingHead serial=65550 13:01:20 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:01:20 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:01:21 Point started: ret=0 13:01:21 point_skyscan result=0 13:01:22 Check angles 13:01:22 SkyScan query 13:01:22 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.46<-16564 Statuses=0009 0009 13:01:22 Msec=0 True Az=64.2 Ze=-68.46 Az status=0009 Ze status=0009 13:01:22 Check angles 13:01:22 SkyScan query 13:01:23 SkyScan query done: ret=0 az=81.495<-5433 ze=-89.43<-17962 Statuses=0009 0009 13:01:23 Msec=750 True Az=81.495 Ze=-89.43 Az status=0009 Ze status=0009 13:01:23 Check angles 13:01:23 SkyScan query 13:01:24 SkyScan query done: ret=0 az=99.165<-6611 ze=-110.4<-19360 Statuses=0009 0009 13:01:24 Msec=1500 True Az=99.165 Ze=-110.4 Az status=0009 Ze status=0009 13:01:24 Check angles 13:01:24 SkyScan query 13:01:24 SkyScan query done: ret=0 az=116.685<-7779 ze=-131.34<-20756 Statuses=0009 0009 13:01:24 Msec=2250 True Az=116.685 Ze=-131.34 Az status=0009 Ze status=0009 13:01:25 Check angles 13:01:25 SkyScan query 13:01:25 SkyScan query done: ret=0 az=131.19<-8746 ze=-141.555<-21437 Statuses=0009 0008 13:01:25 Msec=3000 True Az=131.19 Ze=-141.555 Az status=0009 Ze status=0008 13:01:25 Check angles 13:01:25 SkyScan query 13:01:26 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 13:01:26 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 13:01:26 Message to Master queued w/err=0: serial=65550 error=0 13:01:31 Received message from Master: op=Filter serial=65551 13:01:31 Color wheel filter change from 0 to 0 13:01:31 FLIGetFilterPos err=0 currentPosition=0 13:01:31 FLIGetStepsRemaining err=0 RemainingSteps=0 13:01:31 Filter is already there-color wheel unchanged 13:01:31 Received message from Master: op=Shutter serial=65552 13:01:31 Shutter LASER close 13:01:31 Received message from Camera: op=State serial=65554 13:01:31 GetSingleValue result=40 Value=cccccccc 13:01:31 SkyScan query 13:01:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:01:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:32 Parameters OK 13:01:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:32 Set A/D data flow result=40 13:01:32 Set A/D channel type result=40 13:01:32 Set A/D encoding result=40 13:01:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:32 Set channel filter=0.000000e+000 result=40 13:01:32 Config A/D Result=40 13:01:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:32 Get A/D filter: -9.255963e+061 result=40 13:01:32 Get A/D value=-858993460 result=40 13:01:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:32 Parameters OK 13:01:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:32 Set A/D data flow result=40 13:01:32 Set A/D channel type result=40 13:01:32 Set A/D encoding result=40 13:01:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:32 Set channel filter=0.000000e+000 result=40 13:01:32 Config A/D Result=40 13:01:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:32 Get A/D filter: -9.255963e+061 result=40 13:01:32 Get A/D value=-858993460 result=40 13:01:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:32 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:01:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:01:32 Aux= 13:01:32 Message to Camera, serial 65554 queued 13:02:09 Received message from Master: op=PointingHead serial=65567 13:02:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:02:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:02:09 Point started: ret=0 13:02:09 point_skyscan result=0 13:02:10 Check angles 13:02:10 SkyScan query 13:02:10 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.21<-23414 Statuses=0009 0009 13:02:10 Msec=0 True Az=113.01 Ze=-171.21 Az status=0009 Ze status=0009 13:02:10 Check angles 13:02:10 SkyScan query 13:02:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:02:11 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:02:11 Message to Master queued w/err=0: serial=65567 error=0 13:02:16 Received message from Master: op=Filter serial=65568 13:02:16 Color wheel filter change from 0 to 0 13:02:16 FLIGetFilterPos err=0 currentPosition=0 13:02:16 FLIGetStepsRemaining err=0 RemainingSteps=0 13:02:16 Filter is already there-color wheel unchanged 13:02:16 Received message from Master: op=Shutter serial=65569 13:02:16 Shutter LASER open 13:02:16 Received message from Camera: op=State serial=65571 13:02:16 GetSingleValue result=40 Value=cccccccc 13:02:16 SkyScan query 13:02:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:02:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:17 Parameters OK 13:02:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:17 Set A/D data flow result=40 13:02:17 Set A/D channel type result=40 13:02:17 Set A/D encoding result=40 13:02:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:17 Set channel filter=0.000000e+000 result=40 13:02:17 Config A/D Result=40 13:02:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:17 Get A/D filter: -9.255963e+061 result=40 13:02:17 Get A/D value=-858993460 result=40 13:02:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:17 Parameters OK 13:02:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:17 Set A/D data flow result=40 13:02:17 Set A/D channel type result=40 13:02:17 Set A/D encoding result=40 13:02:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:17 Set channel filter=0.000000e+000 result=40 13:02:17 Config A/D Result=40 13:02:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:17 Get A/D filter: -9.255963e+061 result=40 13:02:17 Get A/D value=-858993460 result=40 13:02:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:02:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:02:17 Aux= 13:02:17 Message to Camera, serial 65571 queued 13:02:25 Received message from Master: op=Shutter serial=65581 13:02:25 Shutter LASER close 13:02:26 Received message from Master: op=PointingHead serial=65585 13:02:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:02:26 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:02:26 Point started: ret=0 13:02:26 point_skyscan result=0 13:02:27 Check angles 13:02:27 SkyScan query 13:02:28 SkyScan query done: ret=0 az=136.275<-9085 ze=-143.01<-21534 Statuses=0009 0009 13:02:28 Msec=0 True Az=136.275 Ze=-143.01 Az status=0009 Ze status=0009 13:02:28 Check angles 13:02:28 SkyScan query 13:02:28 SkyScan query done: ret=0 az=153.705<-10247 ze=-122.01<-20134 Statuses=0009 0009 13:02:28 Msec=750 True Az=153.705 Ze=-122.01 Az status=0009 Ze status=0009 13:02:29 Check angles 13:02:29 SkyScan query 13:02:29 SkyScan query done: ret=0 az=171.3<-11420 ze=-101.115<-18741 Statuses=0009 0009 13:02:29 Msec=1500 True Az=171.3 Ze=-101.115 Az status=0009 Ze status=0009 13:02:29 Check angles 13:02:29 SkyScan query 13:02:30 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.74<-17316 Statuses=0008 0009 13:02:30 Msec=2250 True Az=176.025 Ze=-79.74 Az status=0008 Ze status=0009 13:02:30 Check angles 13:02:30 SkyScan query 13:02:31 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.725<-15915 Statuses=0008 0009 13:02:31 Msec=3000 True Az=176.01 Ze=-58.725 Az status=0008 Ze status=0009 13:02:31 Check angles 13:02:31 SkyScan query 13:02:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 13:02:31 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 13:02:31 Message to Master queued w/err=0: serial=65585 error=0 13:02:36 Received message from Master: op=Filter serial=65586 13:02:36 Color wheel filter change from 0 to 0 13:02:36 FLIGetFilterPos err=0 currentPosition=0 13:02:36 FLIGetStepsRemaining err=0 RemainingSteps=0 13:02:36 Filter is already there-color wheel unchanged 13:02:37 Received message from Master: op=Shutter serial=65587 13:02:37 Shutter LASER close 13:02:37 Received message from Camera: op=State serial=65589 13:02:37 GetSingleValue result=40 Value=cccccccc 13:02:37 SkyScan query 13:02:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:02:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:37 Parameters OK 13:02:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:37 Set A/D data flow result=40 13:02:37 Set A/D channel type result=40 13:02:37 Set A/D encoding result=40 13:02:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:37 Set channel filter=0.000000e+000 result=40 13:02:37 Config A/D Result=40 13:02:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:37 Get A/D filter: -9.255963e+061 result=40 13:02:37 Get A/D value=-858993460 result=40 13:02:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:37 Parameters OK 13:02:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:37 Set A/D data flow result=40 13:02:37 Set A/D channel type result=40 13:02:37 Set A/D encoding result=40 13:02:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:37 Set channel filter=0.000000e+000 result=40 13:02:37 Config A/D Result=40 13:02:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:37 Get A/D filter: -9.255963e+061 result=40 13:02:37 Get A/D value=-858993460 result=40 13:02:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:02:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:02:37 Aux= 13:02:37 Message to Camera, serial 65589 queued 13:03:14 Received message from Master: op=PointingHead serial=65602 13:03:14 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:03:14 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:03:15 Point started: ret=0 13:03:15 point_skyscan result=0 13:03:15 Check angles 13:03:15 SkyScan query 13:03:16 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.78<-13452 Statuses=0009 0009 13:03:16 Msec=0 True Az=152.985 Ze=-21.78 Az status=0009 Ze status=0009 13:03:16 Check angles 13:03:16 SkyScan query 13:03:17 SkyScan query done: ret=0 az=135.495<-9033 ze=-0.78<-12052 Statuses=0009 0009 13:03:17 Msec=750 True Az=135.495 Ze=-0.78 Az status=0009 Ze status=0009 13:03:17 Check angles 13:03:17 SkyScan query 13:03:17 SkyScan query done: ret=0 az=117.99<-7866 ze=20.145<-10657 Statuses=0009 0009 13:03:17 Msec=1500 True Az=117.99 Ze=20.145 Az status=0009 Ze status=0009 13:03:18 Check angles 13:03:18 SkyScan query 13:03:18 SkyScan query done: ret=0 az=100.5<-6700 ze=41.13<-9258 Statuses=0009 0009 13:03:18 Msec=2250 True Az=100.5 Ze=41.13 Az status=0009 Ze status=0009 13:03:18 Check angles 13:03:18 SkyScan query 13:03:19 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 13:03:19 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 13:03:19 Check angles 13:03:19 SkyScan query 13:03:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:03:20 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:03:20 Message to Master queued w/err=0: serial=65602 error=0 13:03:25 Received message from Master: op=Filter serial=65603 13:03:25 Color wheel filter change from 0 to 0 13:03:25 FLIGetFilterPos err=0 currentPosition=0 13:03:25 FLIGetStepsRemaining err=0 RemainingSteps=0 13:03:25 Filter is already there-color wheel unchanged 13:03:25 Received message from Master: op=Shutter serial=65604 13:03:25 Shutter LASER close 13:03:25 Received message from Camera: op=State serial=65606 13:03:25 GetSingleValue result=40 Value=cccccccc 13:03:25 SkyScan query 13:03:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:03:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:25 Parameters OK 13:03:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:25 Set A/D data flow result=40 13:03:25 Set A/D channel type result=40 13:03:25 Set A/D encoding result=40 13:03:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:25 Set channel filter=0.000000e+000 result=40 13:03:25 Config A/D Result=40 13:03:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:25 Get A/D filter: -9.255963e+061 result=40 13:03:25 Get A/D value=-858993460 result=40 13:03:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:25 Parameters OK 13:03:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:25 Set A/D data flow result=40 13:03:25 Set A/D channel type result=40 13:03:25 Set A/D encoding result=40 13:03:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:25 Set channel filter=0.000000e+000 result=40 13:03:25 Config A/D Result=40 13:03:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:25 Get A/D filter: -9.255963e+061 result=40 13:03:25 Get A/D value=-858993460 result=40 13:03:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:03:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:03:25 Aux= 13:03:25 Message to Camera, serial 65606 queued 13:04:01 Received message from Master: op=PointingHead serial=65618 13:04:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:04:01 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:04:02 Point started: ret=0 13:04:02 point_skyscan result=0 13:04:02 Check angles 13:04:02 SkyScan query 13:04:03 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 13:04:03 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 13:04:03 Check angles 13:04:03 SkyScan query 13:04:04 SkyScan query done: ret=0 az=126.72<-8448 ze=38.505<-9433 Statuses=0009 0008 13:04:04 Msec=750 True Az=126.72 Ze=38.505 Az status=0009 Ze status=0008 13:04:04 Check angles 13:04:04 SkyScan query 13:04:05 SkyScan query done: ret=0 az=144.15<-9610 ze=38.505<-9433 Statuses=0009 0008 13:04:05 Msec=1500 True Az=144.15 Ze=38.505 Az status=0009 Ze status=0008 13:04:05 Check angles 13:04:05 SkyScan query 13:04:05 SkyScan query done: ret=0 az=161.535<-10769 ze=38.505<-9433 Statuses=0009 0008 13:04:05 Msec=2250 True Az=161.535 Ze=38.505 Az status=0009 Ze status=0008 13:04:05 Check angles 13:04:05 SkyScan query 13:04:06 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 13:04:06 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 13:04:06 Check angles 13:04:06 SkyScan query 13:04:07 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:04:07 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:04:07 Message to Master queued w/err=0: serial=65618 error=0 13:04:12 Received message from Master: op=Filter serial=65619 13:04:12 Color wheel filter change from 0 to 0 13:04:12 FLIGetFilterPos err=0 currentPosition=0 13:04:12 FLIGetStepsRemaining err=0 RemainingSteps=0 13:04:12 Filter is already there-color wheel unchanged 13:04:12 Received message from Master: op=Shutter serial=65620 13:04:12 Shutter LASER close 13:04:12 Received message from Camera: op=State serial=65622 13:04:12 GetSingleValue result=40 Value=cccccccc 13:04:12 SkyScan query 13:04:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:04:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:13 Parameters OK 13:04:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:13 Set A/D data flow result=40 13:04:13 Set A/D channel type result=40 13:04:13 Set A/D encoding result=40 13:04:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:13 Set channel filter=0.000000e+000 result=40 13:04:13 Config A/D Result=40 13:04:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:13 Get A/D filter: -9.255963e+061 result=40 13:04:13 Get A/D value=-858993460 result=40 13:04:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:13 Parameters OK 13:04:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:13 Set A/D data flow result=40 13:04:13 Set A/D channel type result=40 13:04:13 Set A/D encoding result=40 13:04:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:13 Set channel filter=0.000000e+000 result=40 13:04:13 Config A/D Result=40 13:04:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:13 Get A/D filter: -9.255963e+061 result=40 13:04:13 Get A/D value=-858993460 result=40 13:04:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:04:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:04:13 Aux= 13:04:13 Message to Camera, serial 65622 queued 13:04:49 Received message from Master: op=PointingHead serial=65635 13:04:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:04:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:04:50 Point started: ret=0 13:04:50 point_skyscan result=0 13:04:50 Check angles 13:04:50 SkyScan query 13:04:51 SkyScan query done: ret=0 az=152.775<-10185 ze=8.46<-11436 Statuses=0009 0009 13:04:51 Msec=0 True Az=152.775 Ze=8.46 Az status=0009 Ze status=0009 13:04:51 Check angles 13:04:51 SkyScan query 13:04:52 SkyScan query done: ret=0 az=135.03<-9002 ze=-12.915<-12861 Statuses=0009 0009 13:04:52 Msec=750 True Az=135.03 Ze=-12.915 Az status=0009 Ze status=0009 13:04:52 Check angles 13:04:52 SkyScan query 13:04:53 SkyScan query done: ret=0 az=117.435<-7829 ze=-33.87<-14258 Statuses=0009 0009 13:04:53 Msec=1500 True Az=117.435 Ze=-33.87 Az status=0009 Ze status=0009 13:04:53 Check angles 13:04:53 SkyScan query 13:04:53 SkyScan query done: ret=0 az=100.095<-6673 ze=-51.57<-15438 Statuses=0009 0009 13:04:53 Msec=2250 True Az=100.095 Ze=-51.57 Az status=0009 Ze status=0009 13:04:54 Check angles 13:04:54 SkyScan query 13:04:54 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 13:04:54 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 13:04:54 Check angles 13:04:54 SkyScan query 13:04:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:04:55 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:04:55 Message to Master queued w/err=0: serial=65635 error=0 13:05:00 Received message from Master: op=Filter serial=65636 13:05:00 Color wheel filter change from 0 to 0 13:05:00 FLIGetFilterPos err=0 currentPosition=0 13:05:00 FLIGetStepsRemaining err=0 RemainingSteps=0 13:05:00 Filter is already there-color wheel unchanged 13:05:00 Received message from Master: op=Shutter serial=65637 13:05:00 Shutter LASER close 13:05:00 Received message from Camera: op=State serial=65639 13:05:00 GetSingleValue result=40 Value=cccccccc 13:05:00 SkyScan query 13:05:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:05:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:01 Parameters OK 13:05:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:01 Set A/D data flow result=40 13:05:01 Set A/D channel type result=40 13:05:01 Set A/D encoding result=40 13:05:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:01 Set channel filter=0.000000e+000 result=40 13:05:01 Config A/D Result=40 13:05:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:01 Get A/D filter: -9.255963e+061 result=40 13:05:01 Get A/D value=-858993460 result=40 13:05:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:01 Parameters OK 13:05:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:01 Set A/D data flow result=40 13:05:01 Set A/D channel type result=40 13:05:01 Set A/D encoding result=40 13:05:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:01 Set channel filter=0.000000e+000 result=40 13:05:01 Config A/D Result=40 13:05:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:01 Get A/D filter: -9.255963e+061 result=40 13:05:01 Get A/D value=-858993460 result=40 13:05:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:05:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:05:01 Aux= 13:05:01 Message to Camera, serial 65639 queued 13:05:37 Received message from Master: op=PointingHead serial=65652 13:05:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:05:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:05:38 Point started: ret=0 13:05:38 point_skyscan result=0 13:05:39 Check angles 13:05:39 SkyScan query 13:05:39 SkyScan query done: ret=0 az=108.78<-7252 ze=-81<-17400 Statuses=0009 0009 13:05:39 Msec=0 True Az=108.78 Ze=-81 Az status=0009 Ze status=0009 13:05:39 Check angles 13:05:39 SkyScan query 13:05:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.375<-18825 Statuses=0008 0009 13:05:40 Msec=750 True Az=112.995 Ze=-102.375 Az status=0008 Ze status=0009 13:05:40 Check angles 13:05:40 SkyScan query 13:05:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.36<-20224 Statuses=0008 0009 13:05:41 Msec=1500 True Az=112.995 Ze=-123.36 Az status=0008 Ze status=0009 13:05:41 Check angles 13:05:41 SkyScan query 13:05:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.33<-21622 Statuses=0008 0009 13:05:41 Msec=2250 True Az=112.995 Ze=-144.33 Az status=0008 Ze status=0009 13:05:42 Check angles 13:05:42 SkyScan query 13:05:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.27<-23018 Statuses=0008 0009 13:05:42 Msec=3000 True Az=112.995 Ze=-165.27 Az status=0008 Ze status=0009 13:05:42 Check angles 13:05:42 SkyScan query 13:05:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:05:43 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:05:43 Message to Master queued w/err=0: serial=65652 error=0 13:05:48 Received message from Master: op=Filter serial=65653 13:05:48 Color wheel filter change from 0 to 0 13:05:48 FLIGetFilterPos err=0 currentPosition=0 13:05:48 FLIGetStepsRemaining err=0 RemainingSteps=0 13:05:48 Filter is already there-color wheel unchanged 13:05:48 Received message from Master: op=Shutter serial=65654 13:05:48 Shutter LASER open 13:05:48 Received message from Camera: op=State serial=65656 13:05:48 GetSingleValue result=40 Value=cccccccc 13:05:48 SkyScan query 13:05:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:05:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:49 Parameters OK 13:05:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:49 Set A/D data flow result=40 13:05:49 Set A/D channel type result=40 13:05:49 Set A/D encoding result=40 13:05:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:49 Set channel filter=0.000000e+000 result=40 13:05:49 Config A/D Result=40 13:05:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:49 Get A/D filter: -9.255963e+061 result=40 13:05:49 Get A/D value=-858993460 result=40 13:05:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:49 Parameters OK 13:05:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:49 Set A/D data flow result=40 13:05:49 Set A/D channel type result=40 13:05:49 Set A/D encoding result=40 13:05:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:49 Set channel filter=0.000000e+000 result=40 13:05:49 Config A/D Result=40 13:05:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:49 Get A/D filter: -9.255963e+061 result=40 13:05:49 Get A/D value=-858993460 result=40 13:05:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:05:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:05:49 Aux= 13:05:49 Message to Camera, serial 65656 queued 13:05:57 Received message from Master: op=Shutter serial=65666 13:05:57 Shutter LASER close 13:05:58 Received message from Master: op=PointingHead serial=65670 13:05:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:05:58 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-11 13:05:58] 13:05:58 Point started: ret=0 13:05:58 point_skyscan result=0 13:05:59 Check angles 13:05:59 SkyScan query 13:05:59 SkyScan query done: ret=0 az=88.59<-5906 ze=155.7<-1620 Statuses=0009 0009 13:05:59 Msec=0 True Az=88.59 Ze=155.7 Az status=0009 Ze status=0009 13:06:00 Check angles 13:06:00 SkyScan query 13:06:00 SkyScan query done: ret=0 az=70.74<-4716 ze=134.295<-3047 Statuses=0009 0009 13:06:00 Msec=750 True Az=70.74 Ze=134.295 Az status=0009 Ze status=0009 13:06:00 Check angles 13:06:00 SkyScan query 13:06:01 SkyScan query done: ret=0 az=52.77<-3518 ze=112.905<-4473 Statuses=0009 0009 13:06:01 Msec=1500 True Az=52.77 Ze=112.905 Az status=0009 Ze status=0009 13:06:01 Check angles 13:06:01 SkyScan query 13:06:02 SkyScan query done: ret=0 az=41.04<-2736 ze=91.935<-5871 Statuses=0009 0009 13:06:02 Msec=2250 True Az=41.04 Ze=91.935 Az status=0009 Ze status=0009 13:06:02 Check angles 13:06:02 SkyScan query 13:06:02 SkyScan query done: ret=0 az=40.995<-2733 ze=70.995<-7267 Statuses=0008 0009 13:06:02 Msec=3000 True Az=40.995 Ze=70.995 Az status=0008 Ze status=0009 13:06:03 Check angles 13:06:03 SkyScan query 13:06:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.705<-8553 Statuses=0008 0009 13:06:03 Msec=3750 True Az=40.995 Ze=51.705 Az status=0008 Ze status=0009 13:06:03 Check angles 13:06:03 SkyScan query 13:06:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:06:04 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:06:04 Message to Master queued w/err=0: serial=65670 error=0 13:06:09 Received message from Master: op=Filter serial=65671 13:06:09 Color wheel filter change from 0 to 0 13:06:09 FLIGetFilterPos err=0 currentPosition=0 13:06:09 FLIGetStepsRemaining err=0 RemainingSteps=0 13:06:09 Filter is already there-color wheel unchanged 13:06:09 Received message from Master: op=Shutter serial=65672 13:06:09 Shutter LASER close 13:06:09 Received message from Camera: op=State serial=65674 13:06:09 GetSingleValue result=40 Value=cccccccc 13:06:09 SkyScan query 13:06:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:06:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:10 Parameters OK 13:06:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:10 Set A/D data flow result=40 13:06:10 Set A/D channel type result=40 13:06:10 Set A/D encoding result=40 13:06:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:10 Set channel filter=0.000000e+000 result=40 13:06:10 Config A/D Result=40 13:06:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:10 Get A/D filter: -9.255963e+061 result=40 13:06:10 Get A/D value=-858993460 result=40 13:06:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:10 Parameters OK 13:06:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:10 Set A/D data flow result=40 13:06:10 Set A/D channel type result=40 13:06:10 Set A/D encoding result=40 13:06:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:10 Set channel filter=0.000000e+000 result=40 13:06:10 Config A/D Result=40 13:06:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:10 Get A/D filter: -9.255963e+061 result=40 13:06:10 Get A/D value=-858993460 result=40 13:06:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:06:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:06:10 Aux= 13:06:10 Message to Camera, serial 65674 queued 13:06:46 Received message from Master: op=PointingHead serial=65686 13:06:46 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:06:46 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:06:46 Point started: ret=0 13:06:46 point_skyscan result=0 13:06:47 Check angles 13:06:47 SkyScan query 13:06:47 SkyScan query done: ret=0 az=64.44<-4296 ze=66.555<-7563 Statuses=0009 0008 13:06:47 Msec=0 True Az=64.44 Ze=66.555 Az status=0009 Ze status=0008 13:06:48 Check angles 13:06:48 SkyScan query 13:06:48 SkyScan query done: ret=0 az=81.765<-5451 ze=66.51<-7566 Statuses=0009 0008 13:06:48 Msec=750 True Az=81.765 Ze=66.51 Az status=0009 Ze status=0008 13:06:48 Check angles 13:06:48 SkyScan query 13:06:49 SkyScan query done: ret=0 az=99.39<-6626 ze=66.495<-7567 Statuses=0009 0008 13:06:49 Msec=1500 True Az=99.39 Ze=66.495 Az status=0009 Ze status=0008 13:06:49 Check angles 13:06:49 SkyScan query 13:06:50 SkyScan query done: ret=0 az=116.91<-7794 ze=66.495<-7567 Statuses=0009 0008 13:06:50 Msec=2250 True Az=116.91 Ze=66.495 Az status=0009 Ze status=0008 13:06:50 Check angles 13:06:50 SkyScan query 13:06:50 SkyScan query done: ret=0 az=134.295<-8953 ze=66.495<-7567 Statuses=0009 0008 13:06:50 Msec=3000 True Az=134.295 Ze=66.495 Az status=0009 Ze status=0008 13:06:51 Check angles 13:06:51 SkyScan query 13:06:51 SkyScan query done: ret=0 az=152.085<-10139 ze=66.495<-7567 Statuses=0009 0008 13:06:51 Msec=3750 True Az=152.085 Ze=66.495 Az status=0009 Ze status=0008 13:06:51 Check angles 13:06:51 SkyScan query 13:06:52 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 13:06:52 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 13:06:52 Message to Master queued w/err=0: serial=65686 error=0 13:06:57 Received message from Master: op=Filter serial=65687 13:06:57 Color wheel filter change from 0 to 0 13:06:57 FLIGetFilterPos err=0 currentPosition=0 13:06:57 FLIGetStepsRemaining err=0 RemainingSteps=0 13:06:57 Filter is already there-color wheel unchanged 13:06:57 Received message from Master: op=Shutter serial=65688 13:06:57 Shutter LASER close 13:06:57 Received message from Camera: op=State serial=65690 13:06:57 GetSingleValue result=40 Value=cccccccc 13:06:57 SkyScan query 13:06:58 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:06:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:58 Parameters OK 13:06:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:58 Set A/D data flow result=40 13:06:58 Set A/D channel type result=40 13:06:58 Set A/D encoding result=40 13:06:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:58 Set channel filter=0.000000e+000 result=40 13:06:58 Config A/D Result=40 13:06:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:58 Get A/D filter: -9.255963e+061 result=40 13:06:58 Get A/D value=-858993460 result=40 13:06:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:58 Parameters OK 13:06:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:58 Set A/D data flow result=40 13:06:58 Set A/D channel type result=40 13:06:58 Set A/D encoding result=40 13:06:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:58 Set channel filter=0.000000e+000 result=40 13:06:58 Config A/D Result=40 13:06:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:58 Get A/D filter: -9.255963e+061 result=40 13:06:58 Get A/D value=-858993460 result=40 13:06:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:58 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:06:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:06:58 Aux= 13:06:58 Message to Camera, serial 65690 queued 13:07:35 Received message from Master: op=PointingHead serial=65703 13:07:35 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:07:35 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:07:35 Point started: ret=0 13:07:35 point_skyscan result=0 13:07:36 Check angles 13:07:36 SkyScan query 13:07:36 SkyScan query done: ret=0 az=135.21<-9014 ze=36.915<-9539 Statuses=0009 0009 13:07:36 Msec=0 True Az=135.21 Ze=36.915 Az status=0009 Ze status=0009 13:07:36 Check angles 13:07:36 SkyScan query 13:07:37 SkyScan query done: ret=0 az=117.3<-7820 ze=15.6<-10960 Statuses=0009 0009 13:07:37 Msec=750 True Az=117.3 Ze=15.6 Az status=0009 Ze status=0009 13:07:37 Check angles 13:07:37 SkyScan query 13:07:38 SkyScan query done: ret=0 az=99.6<-6640 ze=-5.82<-12388 Statuses=0009 0009 13:07:38 Msec=1500 True Az=99.6 Ze=-5.82 Az status=0009 Ze status=0009 13:07:38 Check angles 13:07:38 SkyScan query 13:07:39 SkyScan query done: ret=0 az=82.125<-5475 ze=-26.79<-13786 Statuses=0009 0009 13:07:39 Msec=2250 True Az=82.125 Ze=-26.79 Az status=0009 Ze status=0009 13:07:39 Check angles 13:07:39 SkyScan query 13:07:39 SkyScan query done: ret=0 az=64.59<-4306 ze=-38.58<-14572 Statuses=0009 0008 13:07:39 Msec=3000 True Az=64.59 Ze=-38.58 Az status=0009 Ze status=0008 13:07:39 Check angles 13:07:39 SkyScan query 13:07:40 SkyScan query done: ret=0 az=47.16<-3144 ze=-38.52<-14568 Statuses=0009 0008 13:07:40 Msec=3750 True Az=47.16 Ze=-38.52 Az status=0009 Ze status=0008 13:07:40 Check angles 13:07:40 SkyScan query 13:07:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:07:41 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:07:41 Message to Master queued w/err=0: serial=65703 error=0 13:07:46 Received message from Master: op=Filter serial=65704 13:07:46 Color wheel filter change from 0 to 0 13:07:46 FLIGetFilterPos err=0 currentPosition=0 13:07:46 FLIGetStepsRemaining err=0 RemainingSteps=0 13:07:46 Filter is already there-color wheel unchanged 13:07:46 Received message from Master: op=Shutter serial=65705 13:07:46 Shutter LASER close 13:07:46 Received message from Camera: op=State serial=65707 13:07:46 GetSingleValue result=40 Value=cccccccc 13:07:46 SkyScan query 13:07:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:07:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:47 Parameters OK 13:07:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:47 Set A/D data flow result=40 13:07:47 Set A/D channel type result=40 13:07:47 Set A/D encoding result=40 13:07:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:47 Set channel filter=0.000000e+000 result=40 13:07:47 Config A/D Result=40 13:07:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:47 Get A/D filter: -9.255963e+061 result=40 13:07:47 Get A/D value=-858993460 result=40 13:07:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:47 Parameters OK 13:07:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:47 Set A/D data flow result=40 13:07:47 Set A/D channel type result=40 13:07:47 Set A/D encoding result=40 13:07:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:47 Set channel filter=0.000000e+000 result=40 13:07:47 Config A/D Result=40 13:07:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:47 Get A/D filter: -9.255963e+061 result=40 13:07:47 Get A/D value=-858993460 result=40 13:07:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:07:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:07:47 Aux= 13:07:47 Message to Camera, serial 65707 queued 13:08:23 Received message from Master: op=PointingHead serial=65720 13:08:23 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:08:23 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:08:24 Point started: ret=0 13:08:24 point_skyscan result=0 13:08:25 Check angles 13:08:25 SkyScan query 13:08:25 SkyScan query done: ret=0 az=63.93<-4262 ze=-68.19<-16546 Statuses=0009 0009 13:08:25 Msec=0 True Az=63.93 Ze=-68.19 Az status=0009 Ze status=0009 13:08:25 Check angles 13:08:25 SkyScan query 13:08:26 SkyScan query done: ret=0 az=81.285<-5419 ze=-89.19<-17946 Statuses=0009 0009 13:08:26 Msec=750 True Az=81.285 Ze=-89.19 Az status=0009 Ze status=0009 13:08:26 Check angles 13:08:26 SkyScan query 13:08:27 SkyScan query done: ret=0 az=98.82<-6588 ze=-110.085<-19339 Statuses=0009 0009 13:08:27 Msec=1500 True Az=98.82 Ze=-110.085 Az status=0009 Ze status=0009 13:08:27 Check angles 13:08:27 SkyScan query 13:08:27 SkyScan query done: ret=0 az=116.505<-7767 ze=-131.085<-20739 Statuses=0009 0009 13:08:27 Msec=2250 True Az=116.505 Ze=-131.085 Az status=0009 Ze status=0009 13:08:28 Check angles 13:08:28 SkyScan query 13:08:28 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 13:08:28 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 13:08:28 Check angles 13:08:28 SkyScan query 13:08:29 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:08:29 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:08:29 Message to Master queued w/err=0: serial=65720 error=0 13:08:34 Received message from Master: op=Filter serial=65721 13:08:34 Color wheel filter change from 0 to 0 13:08:34 FLIGetFilterPos err=0 currentPosition=0 13:08:34 FLIGetStepsRemaining err=0 RemainingSteps=0 13:08:34 Filter is already there-color wheel unchanged 13:08:34 Received message from Master: op=Shutter serial=65722 13:08:34 Shutter LASER close 13:08:34 Received message from Camera: op=State serial=65724 13:08:34 GetSingleValue result=40 Value=cccccccc 13:08:34 SkyScan query 13:08:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:08:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:35 Parameters OK 13:08:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:35 Set A/D data flow result=40 13:08:35 Set A/D channel type result=40 13:08:35 Set A/D encoding result=40 13:08:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:35 Set channel filter=0.000000e+000 result=40 13:08:35 Config A/D Result=40 13:08:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:35 Get A/D filter: -9.255963e+061 result=40 13:08:35 Get A/D value=-858993460 result=40 13:08:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:35 Parameters OK 13:08:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:35 Set A/D data flow result=40 13:08:35 Set A/D channel type result=40 13:08:35 Set A/D encoding result=40 13:08:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:35 Set channel filter=0.000000e+000 result=40 13:08:35 Config A/D Result=40 13:08:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:35 Get A/D filter: -9.255963e+061 result=40 13:08:35 Get A/D value=-858993460 result=40 13:08:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:08:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:08:35 Aux= 13:08:35 Message to Camera, serial 65724 queued 13:09:11 Received message from Master: op=PointingHead serial=65736 13:09:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:09:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:09:11 Point started: ret=0 13:09:11 point_skyscan result=0 13:09:12 Check angles 13:09:12 SkyScan query 13:09:12 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 13:09:12 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 13:09:12 Check angles 13:09:12 SkyScan query 13:09:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:09:13 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:09:13 Message to Master queued w/err=0: serial=65736 error=0 13:09:18 Received message from Master: op=Filter serial=65737 13:09:18 Color wheel filter change from 0 to 0 13:09:18 FLIGetFilterPos err=0 currentPosition=0 13:09:18 FLIGetStepsRemaining err=0 RemainingSteps=0 13:09:18 Filter is already there-color wheel unchanged 13:09:18 Received message from Master: op=Shutter serial=65738 13:09:18 Shutter LASER open 13:09:18 Received message from Camera: op=State serial=65740 13:09:18 GetSingleValue result=40 Value=cccccccc 13:09:18 SkyScan query 13:09:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:09:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:19 Parameters OK 13:09:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:19 Set A/D data flow result=40 13:09:19 Set A/D channel type result=40 13:09:19 Set A/D encoding result=40 13:09:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:19 Set channel filter=0.000000e+000 result=40 13:09:19 Config A/D Result=40 13:09:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:19 Get A/D filter: -9.255963e+061 result=40 13:09:19 Get A/D value=-858993460 result=40 13:09:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:19 Parameters OK 13:09:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:19 Set A/D data flow result=40 13:09:19 Set A/D channel type result=40 13:09:19 Set A/D encoding result=40 13:09:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:19 Set channel filter=0.000000e+000 result=40 13:09:19 Config A/D Result=40 13:09:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:19 Get A/D filter: -9.255963e+061 result=40 13:09:19 Get A/D value=-858993460 result=40 13:09:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:09:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:09:19 Aux= 13:09:19 Message to Camera, serial 65740 queued 13:09:27 Received message from Master: op=Shutter serial=65750 13:09:27 Shutter LASER close 13:09:28 Received message from Master: op=PointingHead serial=65754 13:09:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:09:28 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:09:28 Point started: ret=0 13:09:28 point_skyscan result=0 13:09:29 Check angles 13:09:29 SkyScan query 13:09:30 SkyScan query done: ret=0 az=135.99<-9066 ze=-143.265<-21551 Statuses=0009 0009 13:09:30 Msec=0 True Az=135.99 Ze=-143.265 Az status=0009 Ze status=0009 13:09:30 Check angles 13:09:30 SkyScan query 13:09:30 SkyScan query done: ret=0 az=153.885<-10259 ze=-121.785<-20119 Statuses=0009 0009 13:09:30 Msec=750 True Az=153.885 Ze=-121.785 Az status=0009 Ze status=0009 13:09:31 Check angles 13:09:31 SkyScan query 13:09:31 SkyScan query done: ret=0 az=171.765<-11451 ze=-100.41<-18694 Statuses=0009 0009 13:09:31 Msec=1500 True Az=171.765 Ze=-100.41 Az status=0009 Ze status=0009 13:09:31 Check angles 13:09:31 SkyScan query 13:09:32 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.53<-17302 Statuses=0008 0009 13:09:32 Msec=2250 True Az=176.025 Ze=-79.53 Az status=0008 Ze status=0009 13:09:32 Check angles 13:09:32 SkyScan query 13:09:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.53<-15902 Statuses=0008 0009 13:09:33 Msec=3000 True Az=175.995 Ze=-58.53 Az status=0008 Ze status=0009 13:09:33 Check angles 13:09:33 SkyScan query 13:09:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 13:09:33 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 13:09:33 Message to Master queued w/err=0: serial=65754 error=0 13:09:38 Received message from Master: op=Filter serial=65755 13:09:38 Color wheel filter change from 0 to 0 13:09:38 FLIGetFilterPos err=0 currentPosition=0 13:09:38 FLIGetStepsRemaining err=0 RemainingSteps=0 13:09:38 Filter is already there-color wheel unchanged 13:09:39 Received message from Master: op=Shutter serial=65756 13:09:39 Shutter LASER close 13:09:39 Received message from Camera: op=State serial=65758 13:09:39 GetSingleValue result=40 Value=cccccccc 13:09:39 SkyScan query 13:09:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:09:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:39 Parameters OK 13:09:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:39 Set A/D data flow result=40 13:09:39 Set A/D channel type result=40 13:09:39 Set A/D encoding result=40 13:09:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:39 Set channel filter=0.000000e+000 result=40 13:09:39 Config A/D Result=40 13:09:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:39 Get A/D filter: -9.255963e+061 result=40 13:09:39 Get A/D value=-858993460 result=40 13:09:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:39 Parameters OK 13:09:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:39 Set A/D data flow result=40 13:09:39 Set A/D channel type result=40 13:09:39 Set A/D encoding result=40 13:09:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:39 Set channel filter=0.000000e+000 result=40 13:09:39 Config A/D Result=40 13:09:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:39 Get A/D filter: -9.255963e+061 result=40 13:09:39 Get A/D value=-858993460 result=40 13:09:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:09:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:09:39 Aux= 13:09:39 Message to Camera, serial 65758 queued 13:10:16 Received message from Master: op=PointingHead serial=65771 13:10:16 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:10:16 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:10:17 Point started: ret=0 13:10:17 point_skyscan result=0 13:10:17 Check angles 13:10:17 SkyScan query 13:10:18 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.08<-13472 Statuses=0009 0009 13:10:18 Msec=0 True Az=153.225 Ze=-22.08 Az status=0009 Ze status=0009 13:10:18 Check angles 13:10:18 SkyScan query 13:10:19 SkyScan query done: ret=0 az=135.84<-9056 ze=-1.095<-12073 Statuses=0009 0009 13:10:19 Msec=750 True Az=135.84 Ze=-1.095 Az status=0009 Ze status=0009 13:10:19 Check angles 13:10:19 SkyScan query 13:10:19 SkyScan query done: ret=0 az=117.735<-7849 ze=20.28<-10648 Statuses=0009 0009 13:10:19 Msec=1500 True Az=117.735 Ze=20.28 Az status=0009 Ze status=0009 13:10:20 Check angles 13:10:20 SkyScan query 13:10:20 SkyScan query done: ret=0 az=100.395<-6693 ze=41.265<-9249 Statuses=0009 0009 13:10:20 Msec=2250 True Az=100.395 Ze=41.265 Az status=0009 Ze status=0009 13:10:20 Check angles 13:10:20 SkyScan query 13:10:21 SkyScan query done: ret=0 az=86.04<-5736 ze=51.555<-8563 Statuses=0009 0008 13:10:21 Msec=3000 True Az=86.04 Ze=51.555 Az status=0009 Ze status=0008 13:10:21 Check angles 13:10:21 SkyScan query 13:10:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:10:22 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:10:22 Message to Master queued w/err=0: serial=65771 error=0 13:10:27 Received message from Master: op=Filter serial=65772 13:10:27 Color wheel filter change from 0 to 0 13:10:27 FLIGetFilterPos err=0 currentPosition=0 13:10:27 FLIGetStepsRemaining err=0 RemainingSteps=0 13:10:27 Filter is already there-color wheel unchanged 13:10:27 Received message from Master: op=Shutter serial=65773 13:10:27 Shutter LASER close 13:10:27 Received message from Camera: op=State serial=65775 13:10:27 GetSingleValue result=40 Value=cccccccc 13:10:27 SkyScan query 13:10:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:10:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:27 Parameters OK 13:10:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:27 Set A/D data flow result=40 13:10:27 Set A/D channel type result=40 13:10:27 Set A/D encoding result=40 13:10:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:27 Set channel filter=0.000000e+000 result=40 13:10:27 Config A/D Result=40 13:10:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:27 Get A/D filter: -9.255963e+061 result=40 13:10:27 Get A/D value=-858993460 result=40 13:10:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:27 Parameters OK 13:10:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:27 Set A/D data flow result=40 13:10:27 Set A/D channel type result=40 13:10:27 Set A/D encoding result=40 13:10:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:27 Set channel filter=0.000000e+000 result=40 13:10:27 Config A/D Result=40 13:10:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:27 Get A/D filter: -9.255963e+061 result=40 13:10:27 Get A/D value=-858993460 result=40 13:10:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:10:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:10:27 Aux= 13:10:27 Message to Camera, serial 65775 queued 13:11:04 Received message from Master: op=PointingHead serial=65788 13:11:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:11:04 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:11:05 Point started: ret=0 13:11:05 point_skyscan result=0 13:11:05 Check angles 13:11:05 SkyScan query 13:11:06 SkyScan query done: ret=0 az=109.05<-7270 ze=38.49<-9434 Statuses=0009 0008 13:11:06 Msec=0 True Az=109.05 Ze=38.49 Az status=0009 Ze status=0008 13:11:06 Check angles 13:11:06 SkyScan query 13:11:07 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 13:11:07 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 13:11:07 Check angles 13:11:07 SkyScan query 13:11:07 SkyScan query done: ret=0 az=144.045<-9603 ze=38.505<-9433 Statuses=0009 0008 13:11:07 Msec=1500 True Az=144.045 Ze=38.505 Az status=0009 Ze status=0008 13:11:08 Check angles 13:11:08 SkyScan query 13:11:08 SkyScan query done: ret=0 az=161.355<-10757 ze=38.505<-9433 Statuses=0009 0008 13:11:08 Msec=2250 True Az=161.355 Ze=38.505 Az status=0009 Ze status=0008 13:11:08 Check angles 13:11:08 SkyScan query 13:11:09 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 13:11:09 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 13:11:09 Check angles 13:11:09 SkyScan query 13:11:10 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:11:10 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:11:10 Message to Master queued w/err=0: serial=65788 error=0 13:11:15 Received message from Master: op=Filter serial=65789 13:11:15 Color wheel filter change from 0 to 0 13:11:15 FLIGetFilterPos err=0 currentPosition=0 13:11:15 FLIGetStepsRemaining err=0 RemainingSteps=0 13:11:15 Filter is already there-color wheel unchanged 13:11:15 Received message from Master: op=Shutter serial=65790 13:11:15 Shutter LASER close 13:11:15 Received message from Camera: op=State serial=65792 13:11:15 GetSingleValue result=40 Value=cccccccc 13:11:15 SkyScan query 13:11:15 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:11:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:15 Parameters OK 13:11:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:15 Set A/D data flow result=40 13:11:15 Set A/D channel type result=40 13:11:15 Set A/D encoding result=40 13:11:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:15 Set channel filter=0.000000e+000 result=40 13:11:15 Config A/D Result=40 13:11:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:15 Get A/D filter: -9.255963e+061 result=40 13:11:15 Get A/D value=-858993460 result=40 13:11:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:15 Parameters OK 13:11:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:15 Set A/D data flow result=40 13:11:15 Set A/D channel type result=40 13:11:15 Set A/D encoding result=40 13:11:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:15 Set channel filter=0.000000e+000 result=40 13:11:15 Config A/D Result=40 13:11:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:15 Get A/D filter: -9.255963e+061 result=40 13:11:15 Get A/D value=-858993460 result=40 13:11:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:11:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:11:15 Aux= 13:11:15 Message to Camera, serial 65792 queued 13:11:52 Received message from Master: op=PointingHead serial=65805 13:11:52 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:11:52 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:11:53 Point started: ret=0 13:11:53 point_skyscan result=0 13:11:53 Check angles 13:11:53 SkyScan query 13:11:54 SkyScan query done: ret=0 az=153.09<-10206 ze=8.775<-11415 Statuses=0009 0009 13:11:54 Msec=0 True Az=153.09 Ze=8.775 Az status=0009 Ze status=0009 13:11:54 Check angles 13:11:54 SkyScan query 13:11:55 SkyScan query done: ret=0 az=135.225<-9015 ze=-12.585<-12839 Statuses=0009 0009 13:11:55 Msec=750 True Az=135.225 Ze=-12.585 Az status=0009 Ze status=0009 13:11:55 Check angles 13:11:55 SkyScan query 13:11:56 SkyScan query done: ret=0 az=117.33<-7822 ze=-33.99<-14266 Statuses=0009 0009 13:11:56 Msec=1500 True Az=117.33 Ze=-33.99 Az status=0009 Ze status=0009 13:11:56 Check angles 13:11:56 SkyScan query 13:11:56 SkyScan query done: ret=0 az=99.99<-6666 ze=-51.57<-15438 Statuses=0009 0009 13:11:56 Msec=2250 True Az=99.99 Ze=-51.57 Az status=0009 Ze status=0009 13:11:56 Check angles 13:11:56 SkyScan query 13:11:57 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 13:11:57 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 13:11:57 Check angles 13:11:57 SkyScan query 13:11:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:11:58 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:11:58 Message to Master queued w/err=0: serial=65805 error=0 13:12:03 Received message from Master: op=Filter serial=65806 13:12:03 Color wheel filter change from 0 to 0 13:12:03 FLIGetFilterPos err=0 currentPosition=0 13:12:03 FLIGetStepsRemaining err=0 RemainingSteps=0 13:12:03 Filter is already there-color wheel unchanged 13:12:03 Received message from Master: op=Shutter serial=65807 13:12:03 Shutter LASER close 13:12:03 Received message from Camera: op=State serial=65809 13:12:03 GetSingleValue result=40 Value=cccccccc 13:12:03 SkyScan query 13:12:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:12:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:04 Parameters OK 13:12:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:04 Set A/D data flow result=40 13:12:04 Set A/D channel type result=40 13:12:04 Set A/D encoding result=40 13:12:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:04 Set channel filter=0.000000e+000 result=40 13:12:04 Config A/D Result=40 13:12:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:04 Get A/D filter: -9.255963e+061 result=40 13:12:04 Get A/D value=-858993460 result=40 13:12:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:04 Parameters OK 13:12:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:04 Set A/D data flow result=40 13:12:04 Set A/D channel type result=40 13:12:04 Set A/D encoding result=40 13:12:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:04 Set channel filter=0.000000e+000 result=40 13:12:04 Config A/D Result=40 13:12:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:04 Get A/D filter: -9.255963e+061 result=40 13:12:04 Get A/D value=-858993460 result=40 13:12:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:04 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:12:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:12:04 Aux= 13:12:04 Message to Camera, serial 65809 queued 13:12:40 Received message from Master: op=PointingHead serial=65822 13:12:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:12:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:12:41 Point started: ret=0 13:12:41 point_skyscan result=0 13:12:42 Check angles 13:12:42 SkyScan query 13:12:42 SkyScan query done: ret=0 az=108.945<-7263 ze=-81.165<-17411 Statuses=0009 0009 13:12:42 Msec=0 True Az=108.945 Ze=-81.165 Az status=0009 Ze status=0009 13:12:42 Check angles 13:12:42 SkyScan query 13:12:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.57<-18838 Statuses=0008 0009 13:12:43 Msec=750 True Az=112.995 Ze=-102.57 Az status=0008 Ze status=0009 13:12:43 Check angles 13:12:43 SkyScan query 13:12:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.96<-20264 Statuses=0008 0009 13:12:44 Msec=1500 True Az=112.995 Ze=-123.96 Az status=0008 Ze status=0009 13:12:44 Check angles 13:12:44 SkyScan query 13:12:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.9<-21660 Statuses=0008 0009 13:12:44 Msec=2250 True Az=112.995 Ze=-144.9 Az status=0008 Ze status=0009 13:12:45 Check angles 13:12:45 SkyScan query 13:12:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.825<-23055 Statuses=0008 0009 13:12:45 Msec=3000 True Az=112.995 Ze=-165.825 Az status=0008 Ze status=0009 13:12:45 Check angles 13:12:45 SkyScan query 13:12:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:12:46 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:12:46 Message to Master queued w/err=0: serial=65822 error=0 13:12:51 Received message from Master: op=Filter serial=65823 13:12:51 Color wheel filter change from 0 to 0 13:12:51 FLIGetFilterPos err=0 currentPosition=0 13:12:51 FLIGetStepsRemaining err=0 RemainingSteps=0 13:12:51 Filter is already there-color wheel unchanged 13:12:51 Received message from Master: op=Shutter serial=65824 13:12:51 Shutter LASER open 13:12:51 Received message from Camera: op=State serial=65826 13:12:51 GetSingleValue result=40 Value=cccccccc 13:12:51 SkyScan query 13:12:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:12:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:52 Parameters OK 13:12:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:52 Set A/D data flow result=40 13:12:52 Set A/D channel type result=40 13:12:52 Set A/D encoding result=40 13:12:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:52 Set channel filter=0.000000e+000 result=40 13:12:52 Config A/D Result=40 13:12:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:52 Get A/D filter: -9.255963e+061 result=40 13:12:52 Get A/D value=-858993460 result=40 13:12:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:52 Parameters OK 13:12:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:52 Set A/D data flow result=40 13:12:52 Set A/D channel type result=40 13:12:52 Set A/D encoding result=40 13:12:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:52 Set channel filter=0.000000e+000 result=40 13:12:52 Config A/D Result=40 13:12:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:52 Get A/D filter: -9.255963e+061 result=40 13:12:52 Get A/D value=-858993460 result=40 13:12:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:12:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:12:52 Aux= 13:12:52 Message to Camera, serial 65826 queued 13:13:00 Received message from Master: op=Shutter serial=65836 13:13:00 Shutter LASER close 13:13:01 Received message from Master: op=PointingHead serial=65840 13:13:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:13:01 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:13:01 Point started: ret=0 13:13:01 point_skyscan result=0 13:13:02 Check angles 13:13:02 SkyScan query 13:13:02 SkyScan query done: ret=0 az=90.18<-6012 ze=157.56<-1496 Statuses=0009 0009 13:13:02 Msec=0 True Az=90.18 Ze=157.56 Az status=0009 Ze status=0009 13:13:03 Check angles 13:13:03 SkyScan query 13:13:03 SkyScan query done: ret=0 az=72.735<-4849 ze=136.575<-2895 Statuses=0009 0009 13:13:03 Msec=750 True Az=72.735 Ze=136.575 Az status=0009 Ze status=0009 13:13:03 Check angles 13:13:03 SkyScan query 13:13:04 SkyScan query done: ret=0 az=55.215<-3681 ze=115.68<-4288 Statuses=0009 0009 13:13:04 Msec=1500 True Az=55.215 Ze=115.68 Az status=0009 Ze status=0009 13:13:04 Check angles 13:13:04 SkyScan query 13:13:05 SkyScan query done: ret=0 az=40.875<-2725 ze=94.68<-5688 Statuses=0009 0009 13:13:05 Msec=2250 True Az=40.875 Ze=94.68 Az status=0009 Ze status=0009 13:13:05 Check angles 13:13:05 SkyScan query 13:13:05 SkyScan query done: ret=0 az=40.995<-2733 ze=73.755<-7083 Statuses=0008 0009 13:13:05 Msec=3000 True Az=40.995 Ze=73.755 Az status=0008 Ze status=0009 13:13:06 Check angles 13:13:06 SkyScan query 13:13:06 SkyScan query done: ret=0 az=40.995<-2733 ze=53.055<-8463 Statuses=0008 0009 13:13:06 Msec=3750 True Az=40.995 Ze=53.055 Az status=0008 Ze status=0009 13:13:06 Check angles 13:13:06 SkyScan query 13:13:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:13:07 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:13:07 Message to Master queued w/err=0: serial=65840 error=0 13:13:12 Received message from Master: op=Filter serial=65841 13:13:12 Color wheel filter change from 0 to 0 13:13:12 FLIGetFilterPos err=0 currentPosition=0 13:13:12 FLIGetStepsRemaining err=0 RemainingSteps=0 13:13:12 Filter is already there-color wheel unchanged 13:13:12 Received message from Master: op=Shutter serial=65842 13:13:12 Shutter LASER close 13:13:12 Received message from Camera: op=State serial=65844 13:13:12 GetSingleValue result=40 Value=cccccccc 13:13:12 SkyScan query 13:13:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:13:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:13 Parameters OK 13:13:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:13 Set A/D data flow result=40 13:13:13 Set A/D channel type result=40 13:13:13 Set A/D encoding result=40 13:13:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:13 Set channel filter=0.000000e+000 result=40 13:13:13 Config A/D Result=40 13:13:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:13 Get A/D filter: -9.255963e+061 result=40 13:13:13 Get A/D value=-858993460 result=40 13:13:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:13 Parameters OK 13:13:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:13 Set A/D data flow result=40 13:13:13 Set A/D channel type result=40 13:13:13 Set A/D encoding result=40 13:13:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:13 Set channel filter=0.000000e+000 result=40 13:13:13 Config A/D Result=40 13:13:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:13 Get A/D filter: -9.255963e+061 result=40 13:13:13 Get A/D value=-858993460 result=40 13:13:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:13:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:13:13 Aux= 13:13:13 Message to Camera, serial 65844 queued 13:13:50 Received message from Master: op=PointingHead serial=65857 13:13:50 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:13:50 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:13:50 Point started: ret=0 13:13:50 point_skyscan result=0 13:13:51 Check angles 13:13:51 SkyScan query 13:13:51 SkyScan query done: ret=0 az=63.825<-4255 ze=66.555<-7563 Statuses=0009 0008 13:13:51 Msec=0 True Az=63.825 Ze=66.555 Az status=0009 Ze status=0008 13:13:52 Check angles 13:13:52 SkyScan query 13:13:52 SkyScan query done: ret=0 az=81.525<-5435 ze=66.51<-7566 Statuses=0009 0008 13:13:52 Msec=750 True Az=81.525 Ze=66.51 Az status=0009 Ze status=0008 13:13:52 Check angles 13:13:52 SkyScan query 13:13:53 SkyScan query done: ret=0 az=99.09<-6606 ze=66.495<-7567 Statuses=0009 0008 13:13:53 Msec=1500 True Az=99.09 Ze=66.495 Az status=0009 Ze status=0008 13:13:53 Check angles 13:13:53 SkyScan query 13:13:54 SkyScan query done: ret=0 az=116.685<-7779 ze=66.495<-7567 Statuses=0009 0008 13:13:54 Msec=2250 True Az=116.685 Ze=66.495 Az status=0009 Ze status=0008 13:13:54 Check angles 13:13:54 SkyScan query 13:13:54 SkyScan query done: ret=0 az=134.205<-8947 ze=66.495<-7567 Statuses=0009 0008 13:13:54 Msec=3000 True Az=134.205 Ze=66.495 Az status=0009 Ze status=0008 13:13:55 Check angles 13:13:55 SkyScan query 13:13:55 SkyScan query done: ret=0 az=151.545<-10103 ze=66.495<-7567 Statuses=0009 0008 13:13:55 Msec=3750 True Az=151.545 Ze=66.495 Az status=0009 Ze status=0008 13:13:55 Check angles 13:13:55 SkyScan query 13:13:56 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:13:56 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 13:13:56 Message to Master queued w/err=0: serial=65857 error=0 13:14:01 Received message from Master: op=Filter serial=65858 13:14:01 Color wheel filter change from 0 to 0 13:14:01 FLIGetFilterPos err=0 currentPosition=0 13:14:01 FLIGetStepsRemaining err=0 RemainingSteps=0 13:14:01 Filter is already there-color wheel unchanged 13:14:01 Received message from Master: op=Shutter serial=65859 13:14:01 Shutter LASER close 13:14:01 Received message from Camera: op=State serial=65861 13:14:01 GetSingleValue result=40 Value=cccccccc 13:14:01 SkyScan query 13:14:02 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:14:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:02 Parameters OK 13:14:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:02 Set A/D data flow result=40 13:14:02 Set A/D channel type result=40 13:14:02 Set A/D encoding result=40 13:14:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:02 Set channel filter=0.000000e+000 result=40 13:14:02 Config A/D Result=40 13:14:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:02 Get A/D filter: -9.255963e+061 result=40 13:14:02 Get A/D value=-858993460 result=40 13:14:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:02 Parameters OK 13:14:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:02 Set A/D data flow result=40 13:14:02 Set A/D channel type result=40 13:14:02 Set A/D encoding result=40 13:14:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:02 Set channel filter=0.000000e+000 result=40 13:14:02 Config A/D Result=40 13:14:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:02 Get A/D filter: -9.255963e+061 result=40 13:14:02 Get A/D value=-858993460 result=40 13:14:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:02 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:14:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:14:02 Aux= 13:14:02 Message to Camera, serial 65861 queued 13:14:38 Received message from Master: op=PointingHead serial=65874 13:14:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:14:38 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:14:39 Point started: ret=0 13:14:39 point_skyscan result=0 13:14:40 Check angles 13:14:40 SkyScan query 13:14:40 SkyScan query done: ret=0 az=135.015<-9001 ze=36.765<-9549 Statuses=0009 0009 13:14:40 Msec=0 True Az=135.015 Ze=36.765 Az status=0009 Ze status=0009 13:14:40 Check angles 13:14:40 SkyScan query 13:14:41 SkyScan query done: ret=0 az=117.525<-7835 ze=15.795<-10947 Statuses=0009 0009 13:14:41 Msec=750 True Az=117.525 Ze=15.795 Az status=0009 Ze status=0009 13:14:41 Check angles 13:14:41 SkyScan query 13:14:42 SkyScan query done: ret=0 az=100.14<-6676 ze=-5.145<-12343 Statuses=0009 0009 13:14:42 Msec=1500 True Az=100.14 Ze=-5.145 Az status=0009 Ze status=0009 13:14:42 Check angles 13:14:42 SkyScan query 13:14:42 SkyScan query done: ret=0 az=82.35<-5490 ze=-26.505<-13767 Statuses=0009 0009 13:14:42 Msec=2250 True Az=82.35 Ze=-26.505 Az status=0009 Ze status=0009 13:14:43 Check angles 13:14:43 SkyScan query 13:14:43 SkyScan query done: ret=0 az=64.8<-4320 ze=-38.58<-14572 Statuses=0009 0008 13:14:43 Msec=3000 True Az=64.8 Ze=-38.58 Az status=0009 Ze status=0008 13:14:43 Check angles 13:14:43 SkyScan query 13:14:44 SkyScan query done: ret=0 az=47.325<-3155 ze=-38.52<-14568 Statuses=0009 0008 13:14:44 Msec=3750 True Az=47.325 Ze=-38.52 Az status=0009 Ze status=0008 13:14:44 Check angles 13:14:44 SkyScan query 13:14:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:14:45 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:14:45 Message to Master queued w/err=0: serial=65874 error=0 13:14:50 Received message from Master: op=Filter serial=65875 13:14:50 Color wheel filter change from 0 to 0 13:14:50 FLIGetFilterPos err=0 currentPosition=0 13:14:50 FLIGetStepsRemaining err=0 RemainingSteps=0 13:14:50 Filter is already there-color wheel unchanged 13:14:50 Received message from Master: op=Shutter serial=65876 13:14:50 Shutter LASER close 13:14:50 Received message from Camera: op=State serial=65878 13:14:50 GetSingleValue result=40 Value=cccccccc 13:14:50 SkyScan query 13:14:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:14:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:50 Parameters OK 13:14:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:50 Set A/D data flow result=40 13:14:50 Set A/D channel type result=40 13:14:50 Set A/D encoding result=40 13:14:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:50 Set channel filter=0.000000e+000 result=40 13:14:50 Config A/D Result=40 13:14:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:50 Get A/D filter: -9.255963e+061 result=40 13:14:50 Get A/D value=-858993460 result=40 13:14:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:50 Parameters OK 13:14:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:50 Set A/D data flow result=40 13:14:50 Set A/D channel type result=40 13:14:50 Set A/D encoding result=40 13:14:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:50 Set channel filter=0.000000e+000 result=40 13:14:50 Config A/D Result=40 13:14:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:50 Get A/D filter: -9.255963e+061 result=40 13:14:50 Get A/D value=-858993460 result=40 13:14:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:14:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:14:50 Aux= 13:14:50 Message to Camera, serial 65878 queued 13:15:27 Received message from Master: op=PointingHead serial=65891 13:15:27 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:15:27 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:15:28 Point started: ret=0 13:15:28 point_skyscan result=0 13:15:28 Check angles 13:15:28 SkyScan query 13:15:29 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.475<-16565 Statuses=0009 0009 13:15:29 Msec=0 True Az=64.215 Ze=-68.475 Az status=0009 Ze status=0009 13:15:29 Received message from Master: op=Identify serial=65892 13:15:29 Check angles 13:15:29 SkyScan query 13:15:30 SkyScan query done: ret=0 az=81.99<-5466 ze=-89.895<-17993 Statuses=0009 0009 13:15:30 Msec=750 True Az=81.99 Ze=-89.895 Az status=0009 Ze status=0009 13:15:30 Check angles 13:15:30 SkyScan query 13:15:31 SkyScan query done: ret=0 az=99.93<-6662 ze=-111.285<-19419 Statuses=0009 0009 13:15:31 Msec=1500 True Az=99.93 Ze=-111.285 Az status=0009 Ze status=0009 13:15:31 Check angles 13:15:31 SkyScan query 13:15:31 SkyScan query done: ret=0 az=117.36<-7824 ze=-132.21<-20814 Statuses=0009 0009 13:15:31 Msec=2250 True Az=117.36 Ze=-132.21 Az status=0009 Ze status=0009 13:15:31 Check angles 13:15:31 SkyScan query 13:15:32 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.555<-21437 Statuses=0009 0008 13:15:32 Msec=3000 True Az=131.085 Ze=-141.555 Az status=0009 Ze status=0008 13:15:32 Check angles 13:15:32 SkyScan query 13:15:33 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 13:15:33 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 13:15:33 Message to Master queued w/err=0: serial=65891 error=0 13:15:38 Received message from Master: op=Filter serial=65895 13:15:38 Color wheel filter change from 0 to 0 13:15:38 FLIGetFilterPos err=0 currentPosition=0 13:15:38 FLIGetStepsRemaining err=0 RemainingSteps=0 13:15:38 Filter is already there-color wheel unchanged 13:15:38 Received message from Master: op=Shutter serial=65896 13:15:38 Shutter LASER close 13:15:38 Received message from Camera: op=State serial=65898 13:15:38 GetSingleValue result=40 Value=cccccccc 13:15:38 SkyScan query 13:15:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:15:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:39 Parameters OK 13:15:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:39 Set A/D data flow result=40 13:15:39 Set A/D channel type result=40 13:15:39 Set A/D encoding result=40 13:15:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:39 Set channel filter=0.000000e+000 result=40 13:15:39 Config A/D Result=40 13:15:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:39 Get A/D filter: -9.255963e+061 result=40 13:15:39 Get A/D value=-858993460 result=40 13:15:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:39 Parameters OK 13:15:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:39 Set A/D data flow result=40 13:15:39 Set A/D channel type result=40 13:15:39 Set A/D encoding result=40 13:15:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:39 Set channel filter=0.000000e+000 result=40 13:15:39 Config A/D Result=40 13:15:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:39 Get A/D filter: -9.255963e+061 result=40 13:15:39 Get A/D value=-858993460 result=40 [UTC 2018-12-11 13:15:39] 13:15:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:39 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:15:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:15:39 Aux= 13:15:39 Message to Camera, serial 65898 queued [UTC 2018-12-11 13:15:54] 13:16:15 Received message from Master: op=PointingHead serial=65911 13:16:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:16:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:16:16 Point started: ret=0 13:16:16 point_skyscan result=0 13:16:16 Check angles 13:16:16 SkyScan query 13:16:17 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.225<-23415 Statuses=0009 0009 13:16:17 Msec=0 True Az=113.01 Ze=-171.225 Az status=0009 Ze status=0009 13:16:17 Check angles 13:16:17 SkyScan query 13:16:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:16:18 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:16:18 Message to Master queued w/err=0: serial=65911 error=0 13:16:23 Received message from Master: op=Filter serial=65912 13:16:23 Color wheel filter change from 0 to 0 13:16:23 FLIGetFilterPos err=0 currentPosition=0 13:16:23 FLIGetStepsRemaining err=0 RemainingSteps=0 13:16:23 Filter is already there-color wheel unchanged 13:16:23 Received message from Master: op=Shutter serial=65913 13:16:23 Shutter LASER open 13:16:23 Received message from Camera: op=State serial=65915 13:16:23 GetSingleValue result=40 Value=cccccccc 13:16:23 SkyScan query 13:16:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:16:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:24 Parameters OK 13:16:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:24 Set A/D data flow result=40 13:16:24 Set A/D channel type result=40 13:16:24 Set A/D encoding result=40 13:16:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:24 Set channel filter=0.000000e+000 result=40 13:16:24 Config A/D Result=40 13:16:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:24 Get A/D filter: -9.255963e+061 result=40 13:16:24 Get A/D value=-858993460 result=40 13:16:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:24 Parameters OK 13:16:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:24 Set A/D data flow result=40 13:16:24 Set A/D channel type result=40 13:16:24 Set A/D encoding result=40 13:16:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:24 Set channel filter=0.000000e+000 result=40 13:16:24 Config A/D Result=40 13:16:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:24 Get A/D filter: -9.255963e+061 result=40 13:16:24 Get A/D value=-858993460 result=40 13:16:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:16:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:16:24 Aux= 13:16:24 Message to Camera, serial 65915 queued 13:16:32 Received message from Master: op=Shutter serial=65925 13:16:32 Shutter LASER close 13:16:33 Received message from Master: op=PointingHead serial=65929 13:16:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:16:33 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:16:33 Point started: ret=0 13:16:33 point_skyscan result=0 13:16:34 Check angles 13:16:34 SkyScan query 13:16:34 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.145<-21543 Statuses=0009 0009 13:16:34 Msec=0 True Az=135.96 Ze=-143.145 Az status=0009 Ze status=0009 13:16:35 Check angles 13:16:35 SkyScan query 13:16:35 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.16<-20144 Statuses=0009 0009 13:16:35 Msec=750 True Az=153.435 Ze=-122.16 Az status=0009 Ze status=0009 13:16:35 Check angles 13:16:35 SkyScan query 13:16:36 SkyScan query done: ret=0 az=170.835<-11389 ze=-101.28<-18752 Statuses=0009 0009 13:16:36 Msec=1500 True Az=170.835 Ze=-101.28 Az status=0009 Ze status=0009 13:16:36 Check angles 13:16:36 SkyScan query 13:16:37 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.28<-17352 Statuses=0008 0009 13:16:37 Msec=2250 True Az=176.025 Ze=-80.28 Az status=0008 Ze status=0009 13:16:37 Check angles 13:16:37 SkyScan query 13:16:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.86<-15924 Statuses=0008 0009 13:16:37 Msec=3000 True Az=175.995 Ze=-58.86 Az status=0008 Ze status=0009 13:16:38 Check angles 13:16:38 SkyScan query 13:16:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:16:38 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:16:38 Message to Master queued w/err=0: serial=65929 error=0 13:16:43 Received message from Master: op=Filter serial=65930 13:16:43 Color wheel filter change from 0 to 0 13:16:43 FLIGetFilterPos err=0 currentPosition=0 13:16:43 FLIGetStepsRemaining err=0 RemainingSteps=0 13:16:43 Filter is already there-color wheel unchanged 13:16:43 Received message from Master: op=Shutter serial=65931 13:16:43 Shutter LASER close 13:16:44 Received message from Camera: op=State serial=65933 13:16:44 GetSingleValue result=40 Value=cccccccc 13:16:44 SkyScan query 13:16:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:16:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:44 Parameters OK 13:16:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:44 Set A/D data flow result=40 13:16:44 Set A/D channel type result=40 13:16:44 Set A/D encoding result=40 13:16:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:44 Set channel filter=0.000000e+000 result=40 13:16:44 Config A/D Result=40 13:16:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:44 Get A/D filter: -9.255963e+061 result=40 13:16:44 Get A/D value=-858993460 result=40 13:16:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:44 Parameters OK 13:16:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:44 Set A/D data flow result=40 13:16:44 Set A/D channel type result=40 13:16:44 Set A/D encoding result=40 13:16:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:44 Set channel filter=0.000000e+000 result=40 13:16:44 Config A/D Result=40 13:16:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:44 Get A/D filter: -9.255963e+061 result=40 13:16:44 Get A/D value=-858993460 result=40 13:16:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:16:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:16:44 Aux= 13:16:44 Message to Camera, serial 65933 queued 13:17:21 Received message from Master: op=PointingHead serial=65946 13:17:21 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:17:21 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:17:21 Point started: ret=0 13:17:21 point_skyscan result=0 13:17:22 Check angles 13:17:22 SkyScan query 13:17:23 SkyScan query done: ret=0 az=152.565<-10171 ze=-21.345<-13423 Statuses=0009 0009 13:17:23 Msec=0 True Az=152.565 Ze=-21.345 Az status=0009 Ze status=0009 13:17:23 Check angles 13:17:23 SkyScan query 13:17:23 SkyScan query done: ret=0 az=134.715<-8981 ze=0.045<-11997 Statuses=0009 0009 13:17:23 Msec=750 True Az=134.715 Ze=0.045 Az status=0009 Ze status=0009 13:17:24 Check angles 13:17:24 SkyScan query 13:17:24 SkyScan query done: ret=0 az=117<-7800 ze=21<-10600 Statuses=0009 0009 13:17:24 Msec=1500 True Az=117 Ze=21 Az status=0009 Ze status=0009 13:17:24 Check angles 13:17:24 SkyScan query 13:17:25 SkyScan query done: ret=0 az=99.72<-6648 ze=41.955<-9203 Statuses=0009 0009 13:17:25 Msec=2250 True Az=99.72 Ze=41.955 Az status=0009 Ze status=0009 13:17:25 Check angles 13:17:25 SkyScan query 13:17:26 SkyScan query done: ret=0 az=86.055<-5737 ze=51.57<-8562 Statuses=0009 0008 13:17:26 Msec=3000 True Az=86.055 Ze=51.57 Az status=0009 Ze status=0008 13:17:26 Check angles 13:17:26 SkyScan query 13:17:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:17:26 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 13:17:26 Message to Master queued w/err=0: serial=65946 error=0 13:17:31 Received message from Master: op=Filter serial=65947 13:17:31 Color wheel filter change from 0 to 0 13:17:31 FLIGetFilterPos err=0 currentPosition=0 13:17:31 FLIGetStepsRemaining err=0 RemainingSteps=0 13:17:31 Filter is already there-color wheel unchanged 13:17:32 Received message from Master: op=Shutter serial=65948 13:17:32 Shutter LASER close 13:17:32 Received message from Camera: op=State serial=65950 13:17:32 GetSingleValue result=40 Value=cccccccc 13:17:32 SkyScan query 13:17:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:17:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:32 Parameters OK 13:17:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:32 Set A/D data flow result=40 13:17:32 Set A/D channel type result=40 13:17:32 Set A/D encoding result=40 13:17:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:32 Set channel filter=0.000000e+000 result=40 13:17:32 Config A/D Result=40 13:17:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:32 Get A/D filter: -9.255963e+061 result=40 13:17:32 Get A/D value=-858993460 result=40 13:17:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:32 Parameters OK 13:17:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:32 Set A/D data flow result=40 13:17:32 Set A/D channel type result=40 13:17:32 Set A/D encoding result=40 13:17:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:32 Set channel filter=0.000000e+000 result=40 13:17:32 Config A/D Result=40 13:17:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:32 Get A/D filter: -9.255963e+061 result=40 13:17:32 Get A/D value=-858993460 result=40 13:17:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:17:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:17:32 Aux= 13:17:32 Message to Camera, serial 65950 queued 13:18:08 Received message from Master: op=PointingHead serial=65962 13:18:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:18:08 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:18:09 Point started: ret=0 13:18:09 point_skyscan result=0 13:18:09 Check angles 13:18:09 SkyScan query 13:18:10 SkyScan query done: ret=0 az=108.735<-7249 ze=38.49<-9434 Statuses=0009 0008 13:18:10 Msec=0 True Az=108.735 Ze=38.49 Az status=0009 Ze status=0008 13:18:10 Check angles 13:18:10 SkyScan query 13:18:11 SkyScan query done: ret=0 az=126.3<-8420 ze=38.505<-9433 Statuses=0009 0008 13:18:11 Msec=750 True Az=126.3 Ze=38.505 Az status=0009 Ze status=0008 13:18:11 Check angles 13:18:11 SkyScan query 13:18:11 SkyScan query done: ret=0 az=143.85<-9590 ze=38.505<-9433 Statuses=0009 0008 13:18:11 Msec=1500 True Az=143.85 Ze=38.505 Az status=0009 Ze status=0008 13:18:12 Check angles 13:18:12 SkyScan query 13:18:12 SkyScan query done: ret=0 az=161.16<-10744 ze=38.505<-9433 Statuses=0009 0008 13:18:12 Msec=2250 True Az=161.16 Ze=38.505 Az status=0009 Ze status=0008 13:18:12 Check angles 13:18:12 SkyScan query 13:18:13 SkyScan query done: ret=0 az=176.055<-11737 ze=38.505<-9433 Statuses=0009 0008 13:18:13 Msec=3000 True Az=176.055 Ze=38.505 Az status=0009 Ze status=0008 13:18:13 Check angles 13:18:13 SkyScan query 13:18:14 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:18:14 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:18:14 Message to Master queued w/err=0: serial=65962 error=0 13:18:19 Received message from Master: op=Filter serial=65963 13:18:19 Color wheel filter change from 0 to 0 13:18:19 FLIGetFilterPos err=0 currentPosition=0 13:18:19 FLIGetStepsRemaining err=0 RemainingSteps=0 13:18:19 Filter is already there-color wheel unchanged 13:18:19 Received message from Master: op=Shutter serial=65964 13:18:19 Shutter LASER close 13:18:19 Received message from Camera: op=State serial=65966 13:18:19 GetSingleValue result=40 Value=cccccccc 13:18:19 SkyScan query 13:18:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:18:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:19 Parameters OK 13:18:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:19 Set A/D data flow result=40 13:18:19 Set A/D channel type result=40 13:18:19 Set A/D encoding result=40 13:18:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:19 Set channel filter=0.000000e+000 result=40 13:18:19 Config A/D Result=40 13:18:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:19 Get A/D filter: -9.255963e+061 result=40 13:18:19 Get A/D value=-858993460 result=40 13:18:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:19 Parameters OK 13:18:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:19 Set A/D data flow result=40 13:18:19 Set A/D channel type result=40 13:18:19 Set A/D encoding result=40 13:18:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:19 Set channel filter=0.000000e+000 result=40 13:18:19 Config A/D Result=40 13:18:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:19 Get A/D filter: -9.255963e+061 result=40 13:18:19 Get A/D value=-858993460 result=40 13:18:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:18:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:18:19 Aux= 13:18:19 Message to Camera, serial 65966 queued 13:18:56 Received message from Master: op=PointingHead serial=65979 13:18:56 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:18:56 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:18:57 Point started: ret=0 13:18:57 point_skyscan result=0 13:18:57 Check angles 13:18:57 SkyScan query 13:18:58 SkyScan query done: ret=0 az=152.775<-10185 ze=8.43<-11438 Statuses=0009 0009 13:18:58 Msec=0 True Az=152.775 Ze=8.43 Az status=0009 Ze status=0009 13:18:58 Check angles 13:18:58 SkyScan query 13:18:59 SkyScan query done: ret=0 az=135.045<-9003 ze=-12.9<-12860 Statuses=0009 0009 13:18:59 Msec=750 True Az=135.045 Ze=-12.9 Az status=0009 Ze status=0009 13:18:59 Check angles 13:18:59 SkyScan query 13:18:59 SkyScan query done: ret=0 az=117.465<-7831 ze=-33.87<-14258 Statuses=0009 0009 13:18:59 Msec=1500 True Az=117.465 Ze=-33.87 Az status=0009 Ze status=0009 13:19:00 Check angles 13:19:00 SkyScan query 13:19:00 SkyScan query done: ret=0 az=100.035<-6669 ze=-51.555<-15437 Statuses=0009 0009 13:19:00 Msec=2250 True Az=100.035 Ze=-51.555 Az status=0009 Ze status=0009 13:19:00 Check angles 13:19:00 SkyScan query 13:19:01 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 13:19:01 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 13:19:01 Check angles 13:19:01 SkyScan query 13:19:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:19:02 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:19:02 Message to Master queued w/err=0: serial=65979 error=0 13:19:07 Received message from Master: op=Filter serial=65980 13:19:07 Color wheel filter change from 0 to 0 13:19:07 FLIGetFilterPos err=0 currentPosition=0 13:19:07 FLIGetStepsRemaining err=0 RemainingSteps=0 13:19:07 Filter is already there-color wheel unchanged 13:19:07 Received message from Master: op=Shutter serial=65981 13:19:07 Shutter LASER close 13:19:07 Received message from Camera: op=State serial=65983 13:19:07 GetSingleValue result=40 Value=cccccccc 13:19:07 SkyScan query 13:19:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:19:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:07 Parameters OK 13:19:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:07 Set A/D data flow result=40 13:19:07 Set A/D channel type result=40 13:19:07 Set A/D encoding result=40 13:19:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:07 Set channel filter=0.000000e+000 result=40 13:19:07 Config A/D Result=40 13:19:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:07 Get A/D filter: -9.255963e+061 result=40 13:19:07 Get A/D value=-858993460 result=40 13:19:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:07 Parameters OK 13:19:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:07 Set A/D data flow result=40 13:19:07 Set A/D channel type result=40 13:19:07 Set A/D encoding result=40 13:19:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:07 Set channel filter=0.000000e+000 result=40 13:19:07 Config A/D Result=40 13:19:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:07 Get A/D filter: -9.255963e+061 result=40 13:19:07 Get A/D value=-858993460 result=40 13:19:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:19:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:19:07 Aux= 13:19:07 Message to Camera, serial 65983 queued 13:19:44 Received message from Master: op=PointingHead serial=65996 13:19:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:19:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:19:45 Point started: ret=0 13:19:45 point_skyscan result=0 13:19:45 Check angles 13:19:45 SkyScan query 13:19:46 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.39<-17426 Statuses=0009 0009 13:19:46 Msec=0 True Az=109.17 Ze=-81.39 Az status=0009 Ze status=0009 13:19:46 Check angles 13:19:46 SkyScan query 13:19:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.795<-18853 Statuses=0008 0009 13:19:47 Msec=750 True Az=112.995 Ze=-102.795 Az status=0008 Ze status=0009 13:19:47 Check angles 13:19:47 SkyScan query 13:19:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.735<-20249 Statuses=0008 0009 13:19:47 Msec=1500 True Az=112.995 Ze=-123.735 Az status=0008 Ze status=0009 13:19:48 Check angles 13:19:48 SkyScan query 13:19:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.69<-21646 Statuses=0008 0009 13:19:48 Msec=2250 True Az=112.995 Ze=-144.69 Az status=0008 Ze status=0009 13:19:48 Check angles 13:19:48 SkyScan query 13:19:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.05<-23070 Statuses=0008 0009 13:19:49 Msec=3000 True Az=112.995 Ze=-166.05 Az status=0008 Ze status=0009 13:19:49 Check angles 13:19:49 SkyScan query 13:19:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:19:50 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:19:50 Message to Master queued w/err=0: serial=65996 error=0 13:19:55 Received message from Master: op=Filter serial=65997 13:19:55 Color wheel filter change from 0 to 0 13:19:55 FLIGetFilterPos err=0 currentPosition=0 13:19:55 FLIGetStepsRemaining err=0 RemainingSteps=0 13:19:55 Filter is already there-color wheel unchanged 13:19:55 Received message from Master: op=Shutter serial=65998 13:19:55 Shutter LASER open 13:19:55 Received message from Camera: op=State serial=66000 13:19:55 GetSingleValue result=40 Value=cccccccc 13:19:55 SkyScan query 13:19:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:19:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:56 Parameters OK 13:19:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:56 Set A/D data flow result=40 13:19:56 Set A/D channel type result=40 13:19:56 Set A/D encoding result=40 13:19:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:56 Set channel filter=0.000000e+000 result=40 13:19:56 Config A/D Result=40 13:19:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:56 Get A/D filter: -9.255963e+061 result=40 13:19:56 Get A/D value=-858993460 result=40 13:19:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:56 Parameters OK 13:19:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:56 Set A/D data flow result=40 13:19:56 Set A/D channel type result=40 13:19:56 Set A/D encoding result=40 13:19:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:56 Set channel filter=0.000000e+000 result=40 13:19:56 Config A/D Result=40 13:19:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:56 Get A/D filter: -9.255963e+061 result=40 13:19:56 Get A/D value=-858993460 result=40 13:19:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:19:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:19:56 Aux= 13:19:56 Message to Camera, serial 66000 queued 13:20:04 Received message from Master: op=Shutter serial=66010 13:20:04 Shutter LASER close 13:20:05 Received message from Master: op=PointingHead serial=66014 13:20:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:20:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:20:05 Point started: ret=0 13:20:05 point_skyscan result=0 13:20:06 Check angles 13:20:06 SkyScan query 13:20:06 SkyScan query done: ret=0 az=89.895<-5993 ze=157.38<-1508 Statuses=0009 0009 13:20:06 Msec=0 True Az=89.895 Ze=157.38 Az status=0009 Ze status=0009 13:20:06 Check angles 13:20:06 SkyScan query 13:20:07 SkyScan query done: ret=0 az=72.48<-4832 ze=136.38<-2908 Statuses=0009 0009 13:20:07 Msec=750 True Az=72.48 Ze=136.38 Az status=0009 Ze status=0009 13:20:07 Check angles 13:20:07 SkyScan query 13:20:08 SkyScan query done: ret=0 az=55.14<-3676 ze=115.485<-4301 Statuses=0009 0009 13:20:08 Msec=1500 True Az=55.14 Ze=115.485 Az status=0009 Ze status=0009 13:20:08 Check angles 13:20:08 SkyScan query 13:20:08 SkyScan query done: ret=0 az=40.875<-2725 ze=94.485<-5701 Statuses=0009 0009 13:20:08 Msec=2250 True Az=40.875 Ze=94.485 Az status=0009 Ze status=0009 13:20:09 Check angles 13:20:09 SkyScan query 13:20:09 SkyScan query done: ret=0 az=40.995<-2733 ze=73.575<-7095 Statuses=0008 0009 13:20:09 Msec=3000 True Az=40.995 Ze=73.575 Az status=0008 Ze status=0009 13:20:09 Check angles 13:20:09 SkyScan query 13:20:10 SkyScan query done: ret=0 az=40.995<-2733 ze=52.665<-8489 Statuses=0008 0009 13:20:10 Msec=3750 True Az=40.995 Ze=52.665 Az status=0008 Ze status=0009 13:20:10 Check angles 13:20:10 SkyScan query 13:20:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:20:11 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:20:11 Message to Master queued w/err=0: serial=66014 error=0 13:20:16 Received message from Master: op=Filter serial=66015 13:20:16 Color wheel filter change from 0 to 0 13:20:16 FLIGetFilterPos err=0 currentPosition=0 13:20:16 FLIGetStepsRemaining err=0 RemainingSteps=0 13:20:16 Filter is already there-color wheel unchanged 13:20:16 Received message from Master: op=Shutter serial=66016 13:20:16 Shutter LASER close 13:20:16 Received message from Camera: op=State serial=66018 13:20:16 GetSingleValue result=40 Value=cccccccc 13:20:16 SkyScan query 13:20:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:20:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:17 Parameters OK 13:20:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:17 Set A/D data flow result=40 13:20:17 Set A/D channel type result=40 13:20:17 Set A/D encoding result=40 13:20:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:17 Set channel filter=0.000000e+000 result=40 13:20:17 Config A/D Result=40 13:20:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:17 Get A/D filter: -9.255963e+061 result=40 13:20:17 Get A/D value=-858993460 result=40 13:20:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:17 Parameters OK 13:20:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:17 Set A/D data flow result=40 13:20:17 Set A/D channel type result=40 13:20:17 Set A/D encoding result=40 13:20:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:17 Set channel filter=0.000000e+000 result=40 13:20:17 Config A/D Result=40 13:20:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:17 Get A/D filter: -9.255963e+061 result=40 13:20:17 Get A/D value=-858993460 result=40 13:20:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:20:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:20:17 Aux= 13:20:17 Message to Camera, serial 66018 queued 13:20:53 Received message from Master: op=PointingHead serial=66031 13:20:53 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:20:53 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:20:54 Point started: ret=0 13:20:54 point_skyscan result=0 13:20:55 Check angles 13:20:55 SkyScan query 13:20:55 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 13:20:55 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 13:20:55 Check angles 13:20:55 SkyScan query 13:20:56 SkyScan query done: ret=0 az=81.51<-5434 ze=66.495<-7567 Statuses=0009 0008 13:20:56 Msec=750 True Az=81.51 Ze=66.495 Az status=0009 Ze status=0008 13:20:56 Check angles 13:20:56 SkyScan query 13:20:57 SkyScan query done: ret=0 az=99.315<-6621 ze=66.495<-7567 Statuses=0009 0008 13:20:57 Msec=1500 True Az=99.315 Ze=66.495 Az status=0009 Ze status=0008 13:20:57 Check angles 13:20:57 SkyScan query 13:20:57 SkyScan query done: ret=0 az=116.595<-7773 ze=66.495<-7567 Statuses=0009 0008 13:20:57 Msec=2250 True Az=116.595 Ze=66.495 Az status=0009 Ze status=0008 13:20:58 Check angles 13:20:58 SkyScan query 13:20:58 SkyScan query done: ret=0 az=134.145<-8943 ze=66.495<-7567 Statuses=0009 0008 13:20:58 Msec=3000 True Az=134.145 Ze=66.495 Az status=0009 Ze status=0008 13:20:58 Check angles 13:20:58 SkyScan query 13:20:59 SkyScan query done: ret=0 az=151.56<-10104 ze=66.495<-7567 Statuses=0009 0008 13:20:59 Msec=3750 True Az=151.56 Ze=66.495 Az status=0009 Ze status=0008 13:20:59 Check angles 13:20:59 SkyScan query 13:21:00 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 13:21:00 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 13:21:00 Message to Master queued w/err=0: serial=66031 error=0 13:21:05 Received message from Master: op=Filter serial=66032 13:21:05 Color wheel filter change from 0 to 0 13:21:05 FLIGetFilterPos err=0 currentPosition=0 13:21:05 FLIGetStepsRemaining err=0 RemainingSteps=0 13:21:05 Filter is already there-color wheel unchanged 13:21:05 Received message from Master: op=Shutter serial=66033 13:21:05 Shutter LASER close 13:21:05 Received message from Camera: op=State serial=66035 13:21:05 GetSingleValue result=40 Value=cccccccc 13:21:05 SkyScan query 13:21:05 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:21:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:05 Parameters OK 13:21:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:05 Set A/D data flow result=40 13:21:05 Set A/D channel type result=40 13:21:05 Set A/D encoding result=40 13:21:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:05 Set channel filter=0.000000e+000 result=40 13:21:05 Config A/D Result=40 13:21:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:05 Get A/D filter: -9.255963e+061 result=40 13:21:05 Get A/D value=-858993460 result=40 13:21:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:05 Parameters OK 13:21:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:05 Set A/D data flow result=40 13:21:05 Set A/D channel type result=40 13:21:05 Set A/D encoding result=40 13:21:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:05 Set channel filter=0.000000e+000 result=40 13:21:05 Config A/D Result=40 13:21:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:05 Get A/D filter: -9.255963e+061 result=40 13:21:05 Get A/D value=-858993460 result=40 13:21:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:05 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:21:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:21:05 Aux= 13:21:05 Message to Camera, serial 66035 queued 13:21:42 Received message from Master: op=PointingHead serial=66048 13:21:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:21:42 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:21:43 Point started: ret=0 13:21:43 point_skyscan result=0 13:21:43 Check angles 13:21:43 SkyScan query 13:21:44 SkyScan query done: ret=0 az=135.135<-9009 ze=36.84<-9544 Statuses=0009 0009 13:21:44 Msec=0 True Az=135.135 Ze=36.84 Az status=0009 Ze status=0009 13:21:44 Check angles 13:21:44 SkyScan query 13:21:45 SkyScan query done: ret=0 az=117.57<-7838 ze=15.885<-10941 Statuses=0009 0009 13:21:45 Msec=750 True Az=117.57 Ze=15.885 Az status=0009 Ze status=0009 13:21:45 Check angles 13:21:45 SkyScan query 13:21:45 SkyScan query done: ret=0 az=100.275<-6685 ze=-5.055<-12337 Statuses=0009 0009 13:21:45 Msec=1500 True Az=100.275 Ze=-5.055 Az status=0009 Ze status=0009 13:21:46 Check angles 13:21:46 SkyScan query 13:21:46 SkyScan query done: ret=0 az=82.38<-5492 ze=-26.4<-13760 Statuses=0009 0009 13:21:46 Msec=2250 True Az=82.38 Ze=-26.4 Az status=0009 Ze status=0009 13:21:46 Check angles 13:21:46 SkyScan query 13:21:47 SkyScan query done: ret=0 az=64.845<-4323 ze=-38.58<-14572 Statuses=0009 0008 13:21:47 Msec=3000 True Az=64.845 Ze=-38.58 Az status=0009 Ze status=0008 13:21:47 Check angles 13:21:47 SkyScan query 13:21:48 SkyScan query done: ret=0 az=47.355<-3157 ze=-38.52<-14568 Statuses=0009 0008 13:21:48 Msec=3750 True Az=47.355 Ze=-38.52 Az status=0009 Ze status=0008 13:21:48 Check angles 13:21:48 SkyScan query 13:21:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:21:48 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:21:48 Message to Master queued w/err=0: serial=66048 error=0 13:21:53 Received message from Master: op=Filter serial=66049 13:21:53 Color wheel filter change from 0 to 0 13:21:53 FLIGetFilterPos err=0 currentPosition=0 13:21:53 FLIGetStepsRemaining err=0 RemainingSteps=0 13:21:53 Filter is already there-color wheel unchanged 13:21:54 Received message from Master: op=Shutter serial=66050 13:21:54 Shutter LASER close 13:21:54 Received message from Camera: op=State serial=66052 13:21:54 GetSingleValue result=40 Value=cccccccc 13:21:54 SkyScan query 13:21:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:21:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:54 Parameters OK 13:21:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:54 Set A/D data flow result=40 13:21:54 Set A/D channel type result=40 13:21:54 Set A/D encoding result=40 13:21:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:54 Set channel filter=0.000000e+000 result=40 13:21:54 Config A/D Result=40 13:21:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:54 Get A/D filter: -9.255963e+061 result=40 13:21:54 Get A/D value=-858993460 result=40 13:21:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:54 Parameters OK 13:21:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:54 Set A/D data flow result=40 13:21:54 Set A/D channel type result=40 13:21:54 Set A/D encoding result=40 13:21:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:54 Set channel filter=0.000000e+000 result=40 13:21:54 Config A/D Result=40 13:21:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:54 Get A/D filter: -9.255963e+061 result=40 13:21:54 Get A/D value=-858993460 result=40 13:21:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:21:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:21:54 Aux= 13:21:54 Message to Camera, serial 66052 queued 13:22:31 Received message from Master: op=PointingHead serial=66065 13:22:31 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:22:31 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:22:31 Point started: ret=0 13:22:31 point_skyscan result=0 13:22:32 Check angles 13:22:32 SkyScan query 13:22:33 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.07<-16538 Statuses=0009 0009 13:22:33 Msec=0 True Az=63.87 Ze=-68.07 Az status=0009 Ze status=0009 13:22:33 Check angles 13:22:33 SkyScan query 13:22:34 SkyScan query done: ret=0 az=81.255<-5417 ze=-89.055<-17937 Statuses=0009 0009 13:22:34 Msec=750 True Az=81.255 Ze=-89.055 Az status=0009 Ze status=0009 13:22:34 Check angles 13:22:34 SkyScan query 13:22:34 SkyScan query done: ret=0 az=98.82<-6588 ze=-109.98<-19332 Statuses=0009 0009 13:22:34 Msec=1500 True Az=98.82 Ze=-109.98 Az status=0009 Ze status=0009 13:22:34 Check angles 13:22:34 SkyScan query 13:22:35 SkyScan query done: ret=0 az=116.25<-7750 ze=-130.95<-20730 Statuses=0009 0009 13:22:35 Msec=2250 True Az=116.25 Ze=-130.95 Az status=0009 Ze status=0009 13:22:35 Check angles 13:22:35 SkyScan query 13:22:36 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.555<-21437 Statuses=0009 0008 13:22:36 Msec=3000 True Az=131.175 Ze=-141.555 Az status=0009 Ze status=0008 13:22:36 Check angles 13:22:36 SkyScan query 13:22:37 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:22:37 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:22:37 Message to Master queued w/err=0: serial=66065 error=0 13:22:42 Received message from Master: op=Filter serial=66066 13:22:42 Color wheel filter change from 0 to 0 13:22:42 FLIGetFilterPos err=0 currentPosition=0 13:22:42 FLIGetStepsRemaining err=0 RemainingSteps=0 13:22:42 Filter is already there-color wheel unchanged 13:22:42 Received message from Master: op=Shutter serial=66067 13:22:42 Shutter LASER close 13:22:42 Received message from Camera: op=State serial=66069 13:22:42 GetSingleValue result=40 Value=cccccccc 13:22:42 SkyScan query 13:22:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:22:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:42 Parameters OK 13:22:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:42 Set A/D data flow result=40 13:22:42 Set A/D channel type result=40 13:22:42 Set A/D encoding result=40 13:22:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:42 Set channel filter=0.000000e+000 result=40 13:22:42 Config A/D Result=40 13:22:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:42 Get A/D filter: -9.255963e+061 result=40 13:22:42 Get A/D value=-858993460 result=40 13:22:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:42 Parameters OK 13:22:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:42 Set A/D data flow result=40 13:22:42 Set A/D channel type result=40 13:22:42 Set A/D encoding result=40 13:22:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:42 Set channel filter=0.000000e+000 result=40 13:22:42 Config A/D Result=40 13:22:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:42 Get A/D filter: -9.255963e+061 result=40 13:22:42 Get A/D value=-858993460 result=40 13:22:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:42 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:22:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:22:42 Aux= 13:22:42 Message to Camera, serial 66069 queued 13:23:18 Received message from Master: op=PointingHead serial=66081 13:23:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:23:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:23:19 Point started: ret=0 13:23:19 point_skyscan result=0 13:23:19 Check angles 13:23:19 SkyScan query 13:23:20 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 13:23:20 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 13:23:20 Check angles 13:23:20 SkyScan query 13:23:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:23:21 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:23:21 Message to Master queued w/err=0: serial=66081 error=0 13:23:26 Received message from Master: op=Filter serial=66082 13:23:26 Color wheel filter change from 0 to 0 13:23:26 FLIGetFilterPos err=0 currentPosition=0 13:23:26 FLIGetStepsRemaining err=0 RemainingSteps=0 13:23:26 Filter is already there-color wheel unchanged 13:23:26 Received message from Master: op=Shutter serial=66083 13:23:26 Shutter LASER open 13:23:26 Received message from Camera: op=State serial=66085 13:23:26 GetSingleValue result=40 Value=cccccccc 13:23:26 SkyScan query 13:23:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:23:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:27 Parameters OK 13:23:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:27 Set A/D data flow result=40 13:23:27 Set A/D channel type result=40 13:23:27 Set A/D encoding result=40 13:23:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:27 Set channel filter=0.000000e+000 result=40 13:23:27 Config A/D Result=40 13:23:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:27 Get A/D filter: -9.255963e+061 result=40 13:23:27 Get A/D value=-858993460 result=40 13:23:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:27 Parameters OK 13:23:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:27 Set A/D data flow result=40 13:23:27 Set A/D channel type result=40 13:23:27 Set A/D encoding result=40 13:23:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:27 Set channel filter=0.000000e+000 result=40 13:23:27 Config A/D Result=40 13:23:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:27 Get A/D filter: -9.255963e+061 result=40 13:23:27 Get A/D value=-858993460 result=40 13:23:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:23:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:23:27 Aux= 13:23:27 Message to Camera, serial 66085 queued 13:23:35 Received message from Master: op=Shutter serial=66095 13:23:35 Shutter LASER close 13:23:36 Received message from Master: op=PointingHead serial=66099 13:23:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:23:36 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:23:36 Point started: ret=0 13:23:36 point_skyscan result=0 13:23:37 Check angles 13:23:37 SkyScan query 13:23:37 SkyScan query done: ret=0 az=136.83<-9122 ze=-142.185<-21479 Statuses=0009 0009 13:23:37 Msec=0 True Az=136.83 Ze=-142.185 Az status=0009 Ze status=0009 13:23:38 Check angles 13:23:38 SkyScan query 13:23:38 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.085<-20139 Statuses=0009 0009 13:23:38 Msec=750 True Az=153.57 Ze=-122.085 Az status=0009 Ze status=0009 13:23:38 Check angles 13:23:38 SkyScan query 13:23:39 SkyScan query done: ret=0 az=171.525<-11435 ze=-100.68<-18712 Statuses=0009 0009 13:23:39 Msec=1500 True Az=171.525 Ze=-100.68 Az status=0009 Ze status=0009 13:23:39 Check angles 13:23:39 SkyScan query 13:23:40 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.815<-17321 Statuses=0008 0009 13:23:40 Msec=2250 True Az=176.025 Ze=-79.815 Az status=0008 Ze status=0009 13:23:40 Check angles 13:23:40 SkyScan query 13:23:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.8<-15920 Statuses=0008 0009 13:23:40 Msec=3000 True Az=176.01 Ze=-58.8 Az status=0008 Ze status=0009 13:23:41 Check angles 13:23:41 SkyScan query 13:23:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:23:41 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:23:41 Message to Master queued w/err=0: serial=66099 error=0 13:23:46 Received message from Master: op=Filter serial=66100 13:23:46 Color wheel filter change from 0 to 0 13:23:46 FLIGetFilterPos err=0 currentPosition=0 13:23:46 FLIGetStepsRemaining err=0 RemainingSteps=0 13:23:46 Filter is already there-color wheel unchanged 13:23:46 Received message from Master: op=Shutter serial=66101 13:23:46 Shutter LASER close 13:23:46 Received message from Camera: op=State serial=66103 13:23:46 GetSingleValue result=40 Value=cccccccc 13:23:46 SkyScan query 13:23:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:23:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:47 Parameters OK 13:23:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:47 Set A/D data flow result=40 13:23:47 Set A/D channel type result=40 13:23:47 Set A/D encoding result=40 13:23:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:47 Set channel filter=0.000000e+000 result=40 13:23:47 Config A/D Result=40 13:23:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:47 Get A/D filter: -9.255963e+061 result=40 13:23:47 Get A/D value=-858993460 result=40 13:23:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:47 Parameters OK 13:23:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:47 Set A/D data flow result=40 13:23:47 Set A/D channel type result=40 13:23:47 Set A/D encoding result=40 13:23:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:47 Set channel filter=0.000000e+000 result=40 13:23:47 Config A/D Result=40 13:23:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:47 Get A/D filter: -9.255963e+061 result=40 13:23:47 Get A/D value=-858993460 result=40 13:23:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:23:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:23:47 Aux= 13:23:47 Message to Camera, serial 66103 queued 13:24:24 Received message from Master: op=PointingHead serial=66116 13:24:24 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:24:24 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:24:24 Point started: ret=0 13:24:24 point_skyscan result=0 13:24:25 Check angles 13:24:25 SkyScan query 13:24:26 SkyScan query done: ret=0 az=152.55<-10170 ze=-21.165<-13411 Statuses=0009 0009 13:24:26 Msec=0 True Az=152.55 Ze=-21.165 Az status=0009 Ze status=0009 13:24:26 Check angles 13:24:26 SkyScan query 13:24:26 SkyScan query done: ret=0 az=135.06<-9004 ze=-0.21<-12014 Statuses=0009 0009 13:24:26 Msec=750 True Az=135.06 Ze=-0.21 Az status=0009 Ze status=0009 13:24:27 Check angles 13:24:27 SkyScan query 13:24:27 SkyScan query done: ret=0 az=117.03<-7802 ze=21.195<-10587 Statuses=0009 0009 13:24:27 Msec=1500 True Az=117.03 Ze=21.195 Az status=0009 Ze status=0009 13:24:27 Check angles 13:24:27 SkyScan query 13:24:28 SkyScan query done: ret=0 az=99.765<-6651 ze=42.075<-9195 Statuses=0009 0009 13:24:28 Msec=2250 True Az=99.765 Ze=42.075 Az status=0009 Ze status=0009 13:24:28 Check angles 13:24:28 SkyScan query 13:24:29 SkyScan query done: ret=0 az=86.04<-5736 ze=51.555<-8563 Statuses=0009 0008 13:24:29 Msec=3000 True Az=86.04 Ze=51.555 Az status=0009 Ze status=0008 13:24:29 Check angles 13:24:29 SkyScan query 13:24:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:24:29 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:24:29 Message to Master queued w/err=0: serial=66116 error=0 13:24:34 Received message from Master: op=Filter serial=66117 13:24:34 Color wheel filter change from 0 to 0 13:24:34 FLIGetFilterPos err=0 currentPosition=0 13:24:34 FLIGetStepsRemaining err=0 RemainingSteps=0 13:24:34 Filter is already there-color wheel unchanged 13:24:35 Received message from Master: op=Shutter serial=66118 13:24:35 Shutter LASER close 13:24:35 Received message from Camera: op=State serial=66120 13:24:35 GetSingleValue result=40 Value=cccccccc 13:24:35 SkyScan query 13:24:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:24:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:35 Parameters OK 13:24:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:35 Set A/D data flow result=40 13:24:35 Set A/D channel type result=40 13:24:35 Set A/D encoding result=40 13:24:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:35 Set channel filter=0.000000e+000 result=40 13:24:35 Config A/D Result=40 13:24:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:35 Get A/D filter: -9.255963e+061 result=40 13:24:35 Get A/D value=-858993460 result=40 13:24:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:35 Parameters OK 13:24:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:35 Set A/D data flow result=40 13:24:35 Set A/D channel type result=40 13:24:35 Set A/D encoding result=40 13:24:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:35 Set channel filter=0.000000e+000 result=40 13:24:35 Config A/D Result=40 13:24:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:35 Get A/D filter: -9.255963e+061 result=40 13:24:35 Get A/D value=-858993460 result=40 13:24:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:24:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:24:35 Aux= 13:24:35 Message to Camera, serial 66120 queued 13:25:12 Received message from Master: op=PointingHead serial=66133 13:25:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:25:12 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:25:12 Point started: ret=0 13:25:12 point_skyscan result=0 13:25:13 Check angles 13:25:13 SkyScan query 13:25:14 SkyScan query done: ret=0 az=109.26<-7284 ze=38.49<-9434 Statuses=0009 0008 13:25:14 Msec=0 True Az=109.26 Ze=38.49 Az status=0009 Ze status=0008 13:25:14 Check angles 13:25:14 SkyScan query 13:25:14 SkyScan query done: ret=0 az=126.72<-8448 ze=38.505<-9433 Statuses=0009 0008 13:25:14 Msec=750 True Az=126.72 Ze=38.505 Az status=0009 Ze status=0008 13:25:15 Check angles 13:25:15 SkyScan query 13:25:15 SkyScan query done: ret=0 az=144.195<-9613 ze=38.505<-9433 Statuses=0009 0008 13:25:15 Msec=1500 True Az=144.195 Ze=38.505 Az status=0009 Ze status=0008 13:25:15 Check angles 13:25:15 SkyScan query 13:25:16 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 13:25:16 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 13:25:16 Check angles 13:25:16 SkyScan query 13:25:17 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 13:25:17 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 13:25:17 Check angles 13:25:17 SkyScan query 13:25:17 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:25:17 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:25:17 Message to Master queued w/err=0: serial=66133 error=0 13:25:22 Received message from Master: op=Filter serial=66134 13:25:22 Color wheel filter change from 0 to 0 13:25:22 FLIGetFilterPos err=0 currentPosition=0 13:25:22 FLIGetStepsRemaining err=0 RemainingSteps=0 13:25:22 Filter is already there-color wheel unchanged 13:25:23 Received message from Master: op=Shutter serial=66135 13:25:23 Shutter LASER close 13:25:23 Received message from Camera: op=State serial=66137 13:25:23 GetSingleValue result=40 Value=cccccccc 13:25:23 SkyScan query 13:25:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:25:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:23 Parameters OK 13:25:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:23 Set A/D data flow result=40 13:25:23 Set A/D channel type result=40 13:25:23 Set A/D encoding result=40 13:25:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:23 Set channel filter=0.000000e+000 result=40 13:25:23 Config A/D Result=40 13:25:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:23 Get A/D filter: -9.255963e+061 result=40 13:25:23 Get A/D value=-858993460 result=40 13:25:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:23 Parameters OK 13:25:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:23 Set A/D data flow result=40 13:25:23 Set A/D channel type result=40 13:25:23 Set A/D encoding result=40 13:25:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:23 Set channel filter=0.000000e+000 result=40 13:25:23 Config A/D Result=40 13:25:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:23 Get A/D filter: -9.255963e+061 result=40 13:25:23 Get A/D value=-858993460 result=40 13:25:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:25:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:25:23 Aux= 13:25:23 Message to Camera, serial 66137 queued 13:26:00 Received message from Master: op=PointingHead serial=66150 13:26:00 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:26:00 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:26:00 Point started: ret=0 13:26:00 point_skyscan result=0 13:26:01 Check angles 13:26:01 SkyScan query 13:26:02 SkyScan query done: ret=0 az=152.76<-10184 ze=8.595<-11427 Statuses=0009 0009 13:26:02 Msec=0 True Az=152.76 Ze=8.595 Az status=0009 Ze status=0009 13:26:02 Check angles 13:26:02 SkyScan query 13:26:02 SkyScan query done: ret=0 az=134.985<-8999 ze=-12.795<-12853 Statuses=0009 0009 13:26:02 Msec=750 True Az=134.985 Ze=-12.795 Az status=0009 Ze status=0009 13:26:03 Check angles 13:26:03 SkyScan query 13:26:03 SkyScan query done: ret=0 az=117.405<-7827 ze=-33.75<-14250 Statuses=0009 0009 13:26:03 Msec=1500 True Az=117.405 Ze=-33.75 Az status=0009 Ze status=0009 13:26:03 Check angles 13:26:03 SkyScan query [UTC 2018-12-11 13:26:04] 13:26:04 SkyScan query done: ret=0 az=100.02<-6668 ze=-51.57<-15438 Statuses=0009 0009 13:26:04 Msec=2250 True Az=100.02 Ze=-51.57 Az status=0009 Ze status=0009 13:26:04 Check angles 13:26:04 SkyScan query 13:26:05 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 13:26:05 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 13:26:05 Check angles 13:26:05 SkyScan query 13:26:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:26:06 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:26:06 Message to Master queued w/err=0: serial=66150 error=0 13:26:11 Received message from Master: op=Filter serial=66151 13:26:11 Color wheel filter change from 0 to 0 13:26:11 FLIGetFilterPos err=0 currentPosition=0 13:26:11 FLIGetStepsRemaining err=0 RemainingSteps=0 13:26:11 Filter is already there-color wheel unchanged 13:26:11 Received message from Master: op=Shutter serial=66152 13:26:11 Shutter LASER close 13:26:11 Received message from Camera: op=State serial=66154 13:26:11 GetSingleValue result=40 Value=cccccccc 13:26:11 SkyScan query 13:26:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:26:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:11 Parameters OK 13:26:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:11 Set A/D data flow result=40 13:26:11 Set A/D channel type result=40 13:26:11 Set A/D encoding result=40 13:26:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:11 Set channel filter=0.000000e+000 result=40 13:26:11 Config A/D Result=40 13:26:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:11 Get A/D filter: -9.255963e+061 result=40 13:26:11 Get A/D value=-858993460 result=40 13:26:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:11 Parameters OK 13:26:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:11 Set A/D data flow result=40 13:26:11 Set A/D channel type result=40 13:26:11 Set A/D encoding result=40 13:26:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:11 Set channel filter=0.000000e+000 result=40 13:26:11 Config A/D Result=40 13:26:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:11 Get A/D filter: -9.255963e+061 result=40 13:26:11 Get A/D value=-858993460 result=40 13:26:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:26:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:26:11 Aux= 13:26:11 Message to Camera, serial 66154 queued 13:26:48 Received message from Master: op=PointingHead serial=66167 13:26:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:26:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:26:48 Point started: ret=0 13:26:48 point_skyscan result=0 13:26:49 Check angles 13:26:49 SkyScan query 13:26:50 SkyScan query done: ret=0 az=108.87<-7258 ze=-81.075<-17405 Statuses=0009 0009 13:26:50 Msec=0 True Az=108.87 Ze=-81.075 Az status=0009 Ze status=0009 13:26:50 Check angles 13:26:50 SkyScan query 13:26:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.045<-18803 Statuses=0008 0009 13:26:51 Msec=750 True Az=112.995 Ze=-102.045 Az status=0008 Ze status=0009 13:26:51 Check angles 13:26:51 SkyScan query 13:26:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.985<-20199 Statuses=0008 0009 13:26:51 Msec=1500 True Az=112.995 Ze=-122.985 Az status=0008 Ze status=0009 13:26:51 Check angles 13:26:51 SkyScan query 13:26:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.955<-21597 Statuses=0008 0009 13:26:52 Msec=2250 True Az=112.995 Ze=-143.955 Az status=0008 Ze status=0009 13:26:52 Check angles 13:26:52 SkyScan query 13:26:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.895<-22993 Statuses=0008 0009 13:26:53 Msec=3000 True Az=112.995 Ze=-164.895 Az status=0008 Ze status=0009 13:26:53 Check angles 13:26:53 SkyScan query 13:26:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 13:26:54 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 13:26:54 Message to Master queued w/err=0: serial=66167 error=0 13:26:59 Received message from Master: op=Filter serial=66168 13:26:59 Color wheel filter change from 0 to 0 13:26:59 FLIGetFilterPos err=0 currentPosition=0 13:26:59 FLIGetStepsRemaining err=0 RemainingSteps=0 13:26:59 Filter is already there-color wheel unchanged 13:26:59 Received message from Master: op=Shutter serial=66169 13:26:59 Shutter LASER open 13:26:59 Received message from Camera: op=State serial=66171 13:26:59 GetSingleValue result=40 Value=cccccccc 13:26:59 SkyScan query 13:26:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:26:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:59 Parameters OK 13:26:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:59 Set A/D data flow result=40 13:26:59 Set A/D channel type result=40 13:26:59 Set A/D encoding result=40 13:26:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:59 Set channel filter=0.000000e+000 result=40 13:26:59 Config A/D Result=40 13:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:59 Get A/D filter: -9.255963e+061 result=40 13:26:59 Get A/D value=-858993460 result=40 13:26:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:59 Parameters OK 13:26:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:59 Set A/D data flow result=40 13:26:59 Set A/D channel type result=40 13:26:59 Set A/D encoding result=40 13:26:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:59 Set channel filter=0.000000e+000 result=40 13:26:59 Config A/D Result=40 13:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:59 Get A/D filter: -9.255963e+061 result=40 13:26:59 Get A/D value=-858993460 result=40 13:26:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:26:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:26:59 Aux= 13:26:59 Message to Camera, serial 66171 queued 13:27:08 Received message from Master: op=Shutter serial=66181 13:27:08 Shutter LASER close 13:27:08 Received message from Master: op=PointingHead serial=66185 13:27:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:27:08 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:27:09 Point started: ret=0 13:27:09 point_skyscan result=0 13:27:10 Check angles 13:27:10 SkyScan query 13:27:10 SkyScan query done: ret=0 az=89.88<-5992 ze=157.23<-1518 Statuses=0009 0009 13:27:10 Msec=0 True Az=89.88 Ze=157.23 Az status=0009 Ze status=0009 13:27:10 Check angles 13:27:10 SkyScan query 13:27:11 SkyScan query done: ret=0 az=71.985<-4799 ze=135.825<-2945 Statuses=0009 0009 13:27:11 Msec=750 True Az=71.985 Ze=135.825 Az status=0009 Ze status=0009 13:27:11 Check angles 13:27:11 SkyScan query 13:27:12 SkyScan query done: ret=0 az=54.63<-3642 ze=114.405<-4373 Statuses=0009 0009 13:27:12 Msec=1500 True Az=54.63 Ze=114.405 Az status=0009 Ze status=0009 13:27:12 Check angles 13:27:12 SkyScan query 13:27:12 SkyScan query done: ret=0 az=40.965<-2731 ze=93.495<-5767 Statuses=0009 0009 13:27:12 Msec=2250 True Az=40.965 Ze=93.495 Az status=0009 Ze status=0009 13:27:13 Check angles 13:27:13 SkyScan query 13:27:13 SkyScan query done: ret=0 az=40.995<-2733 ze=72.54<-7164 Statuses=0008 0009 13:27:13 Msec=3000 True Az=40.995 Ze=72.54 Az status=0008 Ze status=0009 13:27:13 Check angles 13:27:13 SkyScan query 13:27:14 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 13:27:14 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 13:27:14 Check angles 13:27:14 SkyScan query 13:27:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:27:15 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:27:15 Message to Master queued w/err=0: serial=66185 error=0 13:27:20 Received message from Master: op=Filter serial=66186 13:27:20 Color wheel filter change from 0 to 0 13:27:20 FLIGetFilterPos err=0 currentPosition=0 13:27:20 FLIGetStepsRemaining err=0 RemainingSteps=0 13:27:20 Filter is already there-color wheel unchanged 13:27:20 Received message from Master: op=Shutter serial=66187 13:27:20 Shutter LASER close 13:27:20 Received message from Camera: op=State serial=66189 13:27:20 GetSingleValue result=40 Value=cccccccc 13:27:20 SkyScan query 13:27:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:27:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:21 Parameters OK 13:27:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:21 Set A/D data flow result=40 13:27:21 Set A/D channel type result=40 13:27:21 Set A/D encoding result=40 13:27:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:21 Set channel filter=0.000000e+000 result=40 13:27:21 Config A/D Result=40 13:27:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:21 Get A/D filter: -9.255963e+061 result=40 13:27:21 Get A/D value=-858993460 result=40 13:27:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:21 Parameters OK 13:27:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:21 Set A/D data flow result=40 13:27:21 Set A/D channel type result=40 13:27:21 Set A/D encoding result=40 13:27:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:21 Set channel filter=0.000000e+000 result=40 13:27:21 Config A/D Result=40 13:27:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:21 Get A/D filter: -9.255963e+061 result=40 13:27:21 Get A/D value=-858993460 result=40 13:27:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:27:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:27:21 Aux= 13:27:21 Message to Camera, serial 66189 queued 13:27:57 Received message from Master: op=PointingHead serial=66202 13:27:57 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:27:57 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:27:58 Point started: ret=0 13:27:58 point_skyscan result=0 13:27:59 Check angles 13:27:59 SkyScan query 13:27:59 SkyScan query done: ret=0 az=64.065<-4271 ze=66.555<-7563 Statuses=0009 0008 13:27:59 Msec=0 True Az=64.065 Ze=66.555 Az status=0009 Ze status=0008 13:27:59 Check angles 13:27:59 SkyScan query 13:28:00 SkyScan query done: ret=0 az=81.495<-5433 ze=66.495<-7567 Statuses=0009 0008 13:28:00 Msec=750 True Az=81.495 Ze=66.495 Az status=0009 Ze status=0008 13:28:00 Check angles 13:28:00 SkyScan query 13:28:01 SkyScan query done: ret=0 az=99.45<-6630 ze=66.495<-7567 Statuses=0009 0008 13:28:01 Msec=1500 True Az=99.45 Ze=66.495 Az status=0009 Ze status=0008 13:28:01 Check angles 13:28:01 SkyScan query 13:28:01 SkyScan query done: ret=0 az=116.955<-7797 ze=66.495<-7567 Statuses=0009 0008 13:28:01 Msec=2250 True Az=116.955 Ze=66.495 Az status=0009 Ze status=0008 13:28:02 Check angles 13:28:02 SkyScan query 13:28:02 SkyScan query done: ret=0 az=134.415<-8961 ze=66.495<-7567 Statuses=0009 0008 13:28:02 Msec=3000 True Az=134.415 Ze=66.495 Az status=0009 Ze status=0008 13:28:02 Check angles 13:28:02 SkyScan query 13:28:03 SkyScan query done: ret=0 az=152.265<-10151 ze=66.495<-7567 Statuses=0009 0008 13:28:03 Msec=3750 True Az=152.265 Ze=66.495 Az status=0009 Ze status=0008 13:28:03 Check angles 13:28:03 SkyScan query 13:28:04 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:28:04 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 13:28:04 Message to Master queued w/err=0: serial=66202 error=0 13:28:09 Received message from Master: op=Filter serial=66203 13:28:09 Color wheel filter change from 0 to 0 13:28:09 FLIGetFilterPos err=0 currentPosition=0 13:28:09 FLIGetStepsRemaining err=0 RemainingSteps=0 13:28:09 Filter is already there-color wheel unchanged 13:28:09 Received message from Master: op=Shutter serial=66204 13:28:09 Shutter LASER close 13:28:09 Received message from Camera: op=State serial=66206 13:28:09 GetSingleValue result=40 Value=cccccccc 13:28:09 SkyScan query 13:28:09 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:28:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:09 Parameters OK 13:28:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:09 Set A/D data flow result=40 13:28:09 Set A/D channel type result=40 13:28:09 Set A/D encoding result=40 13:28:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:09 Set channel filter=0.000000e+000 result=40 13:28:09 Config A/D Result=40 13:28:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:09 Get A/D filter: -9.255963e+061 result=40 13:28:09 Get A/D value=-858993460 result=40 13:28:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:09 Parameters OK 13:28:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:09 Set A/D data flow result=40 13:28:09 Set A/D channel type result=40 13:28:09 Set A/D encoding result=40 13:28:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:09 Set channel filter=0.000000e+000 result=40 13:28:09 Config A/D Result=40 13:28:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:09 Get A/D filter: -9.255963e+061 result=40 13:28:09 Get A/D value=-858993460 result=40 13:28:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:09 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:28:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:28:09 Aux= 13:28:09 Message to Camera, serial 66206 queued 13:28:46 Received message from Master: op=PointingHead serial=66219 13:28:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:28:46 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:28:47 Point started: ret=0 13:28:47 point_skyscan result=0 13:28:47 Check angles 13:28:47 SkyScan query 13:28:48 SkyScan query done: ret=0 az=134.76<-8984 ze=36.42<-9572 Statuses=0009 0009 13:28:48 Msec=0 True Az=134.76 Ze=36.42 Az status=0009 Ze status=0009 13:28:48 Check angles 13:28:48 SkyScan query 13:28:49 SkyScan query done: ret=0 az=116.91<-7794 ze=15.045<-10997 Statuses=0009 0009 13:28:49 Msec=750 True Az=116.91 Ze=15.045 Az status=0009 Ze status=0009 13:28:49 Check angles 13:28:49 SkyScan query 13:28:49 SkyScan query done: ret=0 az=99.54<-6636 ze=-5.94<-12396 Statuses=0009 0009 13:28:49 Msec=1500 True Az=99.54 Ze=-5.94 Az status=0009 Ze status=0009 13:28:50 Check angles 13:28:50 SkyScan query 13:28:50 SkyScan query done: ret=0 az=82.05<-5470 ze=-26.88<-13792 Statuses=0009 0009 13:28:50 Msec=2250 True Az=82.05 Ze=-26.88 Az status=0009 Ze status=0009 13:28:50 Check angles 13:28:50 SkyScan query 13:28:51 SkyScan query done: ret=0 az=64.5<-4300 ze=-38.565<-14571 Statuses=0009 0008 13:28:51 Msec=3000 True Az=64.5 Ze=-38.565 Az status=0009 Ze status=0008 13:28:51 Check angles 13:28:51 SkyScan query 13:28:52 SkyScan query done: ret=0 az=47.1<-3140 ze=-38.535<-14569 Statuses=0009 0008 13:28:52 Msec=3750 True Az=47.1 Ze=-38.535 Az status=0009 Ze status=0008 13:28:52 Check angles 13:28:52 SkyScan query 13:28:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:28:52 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:28:52 Message to Master queued w/err=0: serial=66219 error=0 13:28:57 Received message from Master: op=Filter serial=66220 13:28:57 Color wheel filter change from 0 to 0 13:28:57 FLIGetFilterPos err=0 currentPosition=0 13:28:57 FLIGetStepsRemaining err=0 RemainingSteps=0 13:28:57 Filter is already there-color wheel unchanged 13:28:58 Received message from Master: op=Shutter serial=66221 13:28:58 Shutter LASER close 13:28:58 Received message from Camera: op=State serial=66223 13:28:58 GetSingleValue result=40 Value=cccccccc 13:28:58 SkyScan query 13:28:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:28:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:58 Parameters OK 13:28:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:58 Set A/D data flow result=40 13:28:58 Set A/D channel type result=40 13:28:58 Set A/D encoding result=40 13:28:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:58 Set channel filter=0.000000e+000 result=40 13:28:58 Config A/D Result=40 13:28:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:58 Get A/D filter: -9.255963e+061 result=40 13:28:58 Get A/D value=-858993460 result=40 13:28:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:58 Parameters OK 13:28:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:58 Set A/D data flow result=40 13:28:58 Set A/D channel type result=40 13:28:58 Set A/D encoding result=40 13:28:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:58 Set channel filter=0.000000e+000 result=40 13:28:58 Config A/D Result=40 13:28:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:58 Get A/D filter: -9.255963e+061 result=40 13:28:58 Get A/D value=-858993460 result=40 13:28:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:28:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:28:58 Aux= 13:28:58 Message to Camera, serial 66223 queued 13:29:35 Received message from Master: op=PointingHead serial=66236 13:29:35 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:29:35 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:29:35 Point started: ret=0 13:29:35 point_skyscan result=0 13:29:36 Check angles 13:29:36 SkyScan query 13:29:37 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.265<-16551 Statuses=0009 0009 13:29:37 Msec=0 True Az=64.005 Ze=-68.265 Az status=0009 Ze status=0009 13:29:37 Check angles 13:29:37 SkyScan query 13:29:38 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.265<-17951 Statuses=0009 0009 13:29:38 Msec=750 True Az=81.315 Ze=-89.265 Az status=0009 Ze status=0009 13:29:38 Check angles 13:29:38 SkyScan query 13:29:38 SkyScan query done: ret=0 az=98.85<-6590 ze=-110.19<-19346 Statuses=0009 0009 13:29:38 Msec=1500 True Az=98.85 Ze=-110.19 Az status=0009 Ze status=0009 13:29:38 Check angles 13:29:38 SkyScan query 13:29:39 SkyScan query done: ret=0 az=116.46<-7764 ze=-131.145<-20743 Statuses=0009 0009 13:29:39 Msec=2250 True Az=116.46 Ze=-131.145 Az status=0009 Ze status=0009 13:29:39 Check angles 13:29:39 SkyScan query 13:29:40 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.555<-21437 Statuses=0009 0008 13:29:40 Msec=3000 True Az=131.175 Ze=-141.555 Az status=0009 Ze status=0008 13:29:40 Check angles 13:29:40 SkyScan query 13:29:41 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 13:29:41 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 13:29:41 Message to Master queued w/err=0: serial=66236 error=0 13:29:46 Received message from Master: op=Filter serial=66237 13:29:46 Color wheel filter change from 0 to 0 13:29:46 FLIGetFilterPos err=0 currentPosition=0 13:29:46 FLIGetStepsRemaining err=0 RemainingSteps=0 13:29:46 Filter is already there-color wheel unchanged 13:29:46 Received message from Master: op=Shutter serial=66238 13:29:46 Shutter LASER close 13:29:46 Received message from Camera: op=State serial=66240 13:29:46 GetSingleValue result=40 Value=cccccccc 13:29:46 SkyScan query 13:29:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:29:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:46 Parameters OK 13:29:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:46 Set A/D data flow result=40 13:29:46 Set A/D channel type result=40 13:29:46 Set A/D encoding result=40 13:29:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:46 Set channel filter=0.000000e+000 result=40 13:29:46 Config A/D Result=40 13:29:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:46 Get A/D filter: -9.255963e+061 result=40 13:29:46 Get A/D value=-858993460 result=40 13:29:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:46 Parameters OK 13:29:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:46 Set A/D data flow result=40 13:29:46 Set A/D channel type result=40 13:29:46 Set A/D encoding result=40 13:29:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:46 Set channel filter=0.000000e+000 result=40 13:29:46 Config A/D Result=40 13:29:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:46 Get A/D filter: -9.255963e+061 result=40 13:29:46 Get A/D value=-858993460 result=40 13:29:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:46 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:29:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:29:46 Aux= 13:29:46 Message to Camera, serial 66240 queued 13:30:23 Received message from Master: op=PointingHead serial=66253 13:30:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:30:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:30:24 Point started: ret=0 13:30:24 point_skyscan result=0 13:30:24 Check angles 13:30:24 SkyScan query 13:30:25 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.21<-23414 Statuses=0009 0009 13:30:25 Msec=0 True Az=113.01 Ze=-171.21 Az status=0009 Ze status=0009 13:30:25 Check angles 13:30:25 SkyScan query 13:30:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:30:26 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:30:26 Message to Master queued w/err=0: serial=66253 error=0 13:30:31 Received message from Master: op=Filter serial=66254 13:30:31 Color wheel filter change from 0 to 0 13:30:31 FLIGetFilterPos err=0 currentPosition=0 13:30:31 FLIGetStepsRemaining err=0 RemainingSteps=0 13:30:31 Filter is already there-color wheel unchanged 13:30:31 Received message from Master: op=Shutter serial=66255 13:30:31 Shutter LASER open 13:30:31 Received message from Camera: op=State serial=66257 13:30:31 GetSingleValue result=40 Value=cccccccc 13:30:31 SkyScan query 13:30:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:30:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:32 Parameters OK 13:30:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:32 Set A/D data flow result=40 13:30:32 Set A/D channel type result=40 13:30:32 Set A/D encoding result=40 13:30:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:32 Set channel filter=0.000000e+000 result=40 13:30:32 Config A/D Result=40 13:30:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:32 Get A/D filter: -9.255963e+061 result=40 13:30:32 Get A/D value=-858993460 result=40 13:30:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:32 Parameters OK 13:30:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:32 Set A/D data flow result=40 13:30:32 Set A/D channel type result=40 13:30:32 Set A/D encoding result=40 13:30:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:32 Set channel filter=0.000000e+000 result=40 13:30:32 Config A/D Result=40 13:30:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:32 Get A/D filter: -9.255963e+061 result=40 13:30:32 Get A/D value=-858993460 result=40 13:30:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:30:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:30:32 Aux= 13:30:32 Message to Camera, serial 66257 queued 13:30:40 Received message from Master: op=Shutter serial=66267 13:30:40 Shutter LASER close 13:30:41 Received message from Master: op=PointingHead serial=66271 13:30:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:30:41 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:30:41 Point started: ret=0 13:30:41 point_skyscan result=0 13:30:42 Check angles 13:30:42 SkyScan query 13:30:42 SkyScan query done: ret=0 az=136.185<-9079 ze=-142.845<-21523 Statuses=0009 0009 13:30:42 Msec=0 True Az=136.185 Ze=-142.845 Az status=0009 Ze status=0009 13:30:42 Check angles 13:30:42 SkyScan query 13:30:43 SkyScan query done: ret=0 az=154.08<-10272 ze=-121.47<-20098 Statuses=0009 0009 13:30:43 Msec=750 True Az=154.08 Ze=-121.47 Az status=0009 Ze status=0009 13:30:43 Check angles 13:30:43 SkyScan query 13:30:44 SkyScan query done: ret=0 az=171.555<-11437 ze=-100.47<-18698 Statuses=0009 0009 13:30:44 Msec=1500 True Az=171.555 Ze=-100.47 Az status=0009 Ze status=0009 13:30:44 Check angles 13:30:44 SkyScan query 13:30:45 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.56<-17304 Statuses=0008 0009 13:30:45 Msec=2250 True Az=176.025 Ze=-79.56 Az status=0008 Ze status=0009 13:30:45 Check angles 13:30:45 SkyScan query 13:30:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.14<-15876 Statuses=0008 0009 13:30:45 Msec=3000 True Az=176.01 Ze=-58.14 Az status=0008 Ze status=0009 13:30:45 Check angles 13:30:45 SkyScan query 13:30:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:30:46 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:30:46 Message to Master queued w/err=0: serial=66271 error=0 13:30:51 Received message from Master: op=Filter serial=66272 13:30:51 Color wheel filter change from 0 to 0 13:30:51 FLIGetFilterPos err=0 currentPosition=0 13:30:51 FLIGetStepsRemaining err=0 RemainingSteps=0 13:30:51 Filter is already there-color wheel unchanged 13:30:51 Received message from Master: op=Shutter serial=66273 13:30:51 Shutter LASER close 13:30:51 Received message from Camera: op=State serial=66275 13:30:51 GetSingleValue result=40 Value=cccccccc 13:30:51 SkyScan query 13:30:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:30:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:52 Parameters OK 13:30:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:52 Set A/D data flow result=40 13:30:52 Set A/D channel type result=40 13:30:52 Set A/D encoding result=40 13:30:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:52 Set channel filter=0.000000e+000 result=40 13:30:52 Config A/D Result=40 13:30:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:52 Get A/D filter: -9.255963e+061 result=40 13:30:52 Get A/D value=-858993460 result=40 13:30:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:52 Parameters OK 13:30:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:52 Set A/D data flow result=40 13:30:52 Set A/D channel type result=40 13:30:52 Set A/D encoding result=40 13:30:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:52 Set channel filter=0.000000e+000 result=40 13:30:52 Config A/D Result=40 13:30:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:52 Get A/D filter: -9.255963e+061 result=40 13:30:52 Get A/D value=-858993460 result=40 13:30:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:30:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:30:52 Aux= 13:30:52 Message to Camera, serial 66275 queued 13:31:29 Received message from Master: op=PointingHead serial=66288 13:31:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:31:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:31:29 Point started: ret=0 13:31:29 point_skyscan result=0 13:31:30 Check angles 13:31:30 SkyScan query 13:31:30 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.05<-13470 Statuses=0009 0009 13:31:30 Msec=0 True Az=153.225 Ze=-22.05 Az status=0009 Ze status=0009 13:31:31 Check angles 13:31:31 SkyScan query 13:31:31 SkyScan query done: ret=0 az=135.78<-9052 ze=-1.08<-12072 Statuses=0009 0009 13:31:31 Msec=750 True Az=135.78 Ze=-1.08 Az status=0009 Ze status=0009 13:31:31 Check angles 13:31:31 SkyScan query 13:31:32 SkyScan query done: ret=0 az=118.23<-7882 ze=19.875<-10675 Statuses=0009 0009 13:31:32 Msec=1500 True Az=118.23 Ze=19.875 Az status=0009 Ze status=0009 13:31:32 Check angles 13:31:32 SkyScan query 13:31:33 SkyScan query done: ret=0 az=100.65<-6710 ze=40.845<-9277 Statuses=0009 0009 13:31:33 Msec=2250 True Az=100.65 Ze=40.845 Az status=0009 Ze status=0009 13:31:33 Check angles 13:31:33 SkyScan query 13:31:33 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 13:31:33 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 13:31:34 Check angles 13:31:34 SkyScan query 13:31:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:31:34 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:31:34 Message to Master queued w/err=0: serial=66288 error=0 13:31:39 Received message from Master: op=Filter serial=66289 13:31:39 Color wheel filter change from 0 to 0 13:31:39 FLIGetFilterPos err=0 currentPosition=0 13:31:39 FLIGetStepsRemaining err=0 RemainingSteps=0 13:31:39 Filter is already there-color wheel unchanged 13:31:39 Received message from Master: op=Shutter serial=66290 13:31:39 Shutter LASER close 13:31:39 Received message from Camera: op=State serial=66292 13:31:39 GetSingleValue result=40 Value=cccccccc 13:31:39 SkyScan query 13:31:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:31:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:40 Parameters OK 13:31:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:40 Set A/D data flow result=40 13:31:40 Set A/D channel type result=40 13:31:40 Set A/D encoding result=40 13:31:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:40 Set channel filter=0.000000e+000 result=40 13:31:40 Config A/D Result=40 13:31:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:40 Get A/D filter: -9.255963e+061 result=40 13:31:40 Get A/D value=-858993460 result=40 13:31:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:40 Parameters OK 13:31:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:40 Set A/D data flow result=40 13:31:40 Set A/D channel type result=40 13:31:40 Set A/D encoding result=40 13:31:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:40 Set channel filter=0.000000e+000 result=40 13:31:40 Config A/D Result=40 13:31:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:40 Get A/D filter: -9.255963e+061 result=40 13:31:40 Get A/D value=-858993460 result=40 13:31:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:31:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:31:40 Aux= 13:31:40 Message to Camera, serial 66292 queued 13:32:16 Received message from Master: op=PointingHead serial=66304 13:32:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:32:16 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:32:16 Point started: ret=0 13:32:16 point_skyscan result=0 13:32:17 Check angles 13:32:17 SkyScan query 13:32:18 SkyScan query done: ret=0 az=108.795<-7253 ze=38.49<-9434 Statuses=0009 0008 13:32:18 Msec=0 True Az=108.795 Ze=38.49 Az status=0009 Ze status=0008 13:32:18 Check angles 13:32:18 SkyScan query 13:32:18 SkyScan query done: ret=0 az=126.48<-8432 ze=38.505<-9433 Statuses=0009 0008 13:32:18 Msec=750 True Az=126.48 Ze=38.505 Az status=0009 Ze status=0008 13:32:19 Check angles 13:32:19 SkyScan query 13:32:19 SkyScan query done: ret=0 az=143.835<-9589 ze=38.505<-9433 Statuses=0009 0008 13:32:19 Msec=1500 True Az=143.835 Ze=38.505 Az status=0009 Ze status=0008 13:32:19 Check angles 13:32:19 SkyScan query 13:32:20 SkyScan query done: ret=0 az=161.19<-10746 ze=38.505<-9433 Statuses=0009 0008 13:32:20 Msec=2250 True Az=161.19 Ze=38.505 Az status=0009 Ze status=0008 13:32:20 Check angles 13:32:20 SkyScan query 13:32:21 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 13:32:21 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 13:32:21 Check angles 13:32:21 SkyScan query 13:32:21 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:32:21 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:32:21 Message to Master queued w/err=0: serial=66304 error=0 13:32:26 Received message from Master: op=Filter serial=66305 13:32:26 Color wheel filter change from 0 to 0 13:32:26 FLIGetFilterPos err=0 currentPosition=0 13:32:26 FLIGetStepsRemaining err=0 RemainingSteps=0 13:32:26 Filter is already there-color wheel unchanged 13:32:27 Received message from Master: op=Shutter serial=66306 13:32:27 Shutter LASER close 13:32:27 Received message from Camera: op=State serial=66308 13:32:27 GetSingleValue result=40 Value=cccccccc 13:32:27 SkyScan query 13:32:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:32:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:27 Parameters OK 13:32:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:27 Set A/D data flow result=40 13:32:27 Set A/D channel type result=40 13:32:27 Set A/D encoding result=40 13:32:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:27 Set channel filter=0.000000e+000 result=40 13:32:27 Config A/D Result=40 13:32:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:27 Get A/D filter: -9.255963e+061 result=40 13:32:27 Get A/D value=-858993460 result=40 13:32:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:27 Parameters OK 13:32:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:27 Set A/D data flow result=40 13:32:27 Set A/D channel type result=40 13:32:27 Set A/D encoding result=40 13:32:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:27 Set channel filter=0.000000e+000 result=40 13:32:27 Config A/D Result=40 13:32:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:27 Get A/D filter: -9.255963e+061 result=40 13:32:27 Get A/D value=-858993460 result=40 13:32:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:32:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:32:27 Aux= 13:32:27 Message to Camera, serial 66308 queued 13:33:04 Received message from Master: op=PointingHead serial=66321 13:33:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:33:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:33:04 Point started: ret=0 13:33:04 point_skyscan result=0 13:33:05 Check angles 13:33:05 SkyScan query 13:33:06 SkyScan query done: ret=0 az=152.775<-10185 ze=8.58<-11428 Statuses=0009 0009 13:33:06 Msec=0 True Az=152.775 Ze=8.58 Az status=0009 Ze status=0009 13:33:06 Check angles 13:33:06 SkyScan query 13:33:06 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.39<-12826 Statuses=0009 0009 13:33:06 Msec=750 True Az=135.42 Ze=-12.39 Az status=0009 Ze status=0009 13:33:07 Check angles 13:33:07 SkyScan query 13:33:07 SkyScan query done: ret=0 az=117.75<-7850 ze=-33.3<-14220 Statuses=0009 0009 13:33:07 Msec=1500 True Az=117.75 Ze=-33.3 Az status=0009 Ze status=0009 13:33:07 Check angles 13:33:07 SkyScan query 13:33:08 SkyScan query done: ret=0 az=100.32<-6688 ze=-51.54<-15436 Statuses=0009 0009 13:33:08 Msec=2250 True Az=100.32 Ze=-51.54 Az status=0009 Ze status=0009 13:33:08 Check angles 13:33:08 SkyScan query 13:33:09 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 13:33:09 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 13:33:09 Check angles 13:33:09 SkyScan query 13:33:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:33:09 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:33:09 Message to Master queued w/err=0: serial=66321 error=0 13:33:14 Received message from Master: op=Filter serial=66322 13:33:14 Color wheel filter change from 0 to 0 13:33:14 FLIGetFilterPos err=0 currentPosition=0 13:33:14 FLIGetStepsRemaining err=0 RemainingSteps=0 13:33:14 Filter is already there-color wheel unchanged 13:33:15 Received message from Master: op=Shutter serial=66323 13:33:15 Shutter LASER close 13:33:15 Received message from Camera: op=State serial=66325 13:33:15 GetSingleValue result=40 Value=cccccccc 13:33:15 SkyScan query 13:33:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:33:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:15 Parameters OK 13:33:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:15 Set A/D data flow result=40 13:33:15 Set A/D channel type result=40 13:33:15 Set A/D encoding result=40 13:33:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:15 Set channel filter=0.000000e+000 result=40 13:33:15 Config A/D Result=40 13:33:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:15 Get A/D filter: -9.255963e+061 result=40 13:33:15 Get A/D value=-858993460 result=40 13:33:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:15 Parameters OK 13:33:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:15 Set A/D data flow result=40 13:33:15 Set A/D channel type result=40 13:33:15 Set A/D encoding result=40 13:33:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:15 Set channel filter=0.000000e+000 result=40 13:33:15 Config A/D Result=40 13:33:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:15 Get A/D filter: -9.255963e+061 result=40 13:33:15 Get A/D value=-858993460 result=40 13:33:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:33:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:33:15 Aux= 13:33:15 Message to Camera, serial 66325 queued 13:33:52 Received message from Master: op=PointingHead serial=66338 13:33:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:33:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:33:52 Point started: ret=0 13:33:52 point_skyscan result=0 13:33:53 Check angles 13:33:53 SkyScan query 13:33:54 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.315<-17421 Statuses=0009 0009 13:33:54 Msec=0 True Az=108.975 Ze=-81.315 Az status=0009 Ze status=0009 13:33:54 Check angles 13:33:54 SkyScan query 13:33:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.705<-18847 Statuses=0008 0009 13:33:55 Msec=750 True Az=112.995 Ze=-102.705 Az status=0008 Ze status=0009 13:33:55 Check angles 13:33:55 SkyScan query 13:33:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.69<-20246 Statuses=0008 0009 13:33:55 Msec=1500 True Az=112.995 Ze=-123.69 Az status=0008 Ze status=0009 13:33:55 Check angles 13:33:55 SkyScan query 13:33:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.63<-21642 Statuses=0008 0009 13:33:56 Msec=2250 True Az=112.995 Ze=-144.63 Az status=0008 Ze status=0009 13:33:56 Check angles 13:33:56 SkyScan query 13:33:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.975<-23065 Statuses=0008 0009 13:33:57 Msec=3000 True Az=112.995 Ze=-165.975 Az status=0008 Ze status=0009 13:33:57 Check angles 13:33:57 SkyScan query 13:33:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:33:58 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:33:58 Message to Master queued w/err=0: serial=66338 error=0 13:34:03 Received message from Master: op=Filter serial=66339 13:34:03 Color wheel filter change from 0 to 0 13:34:03 FLIGetFilterPos err=0 currentPosition=0 13:34:03 FLIGetStepsRemaining err=0 RemainingSteps=0 13:34:03 Filter is already there-color wheel unchanged 13:34:03 Received message from Master: op=Shutter serial=66340 13:34:03 Shutter LASER open 13:34:03 Received message from Camera: op=State serial=66342 13:34:03 GetSingleValue result=40 Value=cccccccc 13:34:03 SkyScan query 13:34:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:34:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:03 Parameters OK 13:34:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:03 Set A/D data flow result=40 13:34:03 Set A/D channel type result=40 13:34:03 Set A/D encoding result=40 13:34:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:03 Set channel filter=0.000000e+000 result=40 13:34:03 Config A/D Result=40 13:34:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:03 Get A/D filter: -9.255963e+061 result=40 13:34:03 Get A/D value=-858993460 result=40 13:34:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:03 Parameters OK 13:34:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:03 Set A/D data flow result=40 13:34:03 Set A/D channel type result=40 13:34:03 Set A/D encoding result=40 13:34:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:03 Set channel filter=0.000000e+000 result=40 13:34:03 Config A/D Result=40 13:34:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:03 Get A/D filter: -9.255963e+061 result=40 13:34:03 Get A/D value=-858993460 result=40 13:34:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:34:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:34:03 Aux= 13:34:03 Message to Camera, serial 66342 queued 13:34:12 Received message from Master: op=Shutter serial=66352 13:34:12 Shutter LASER close 13:34:12 Received message from Master: op=PointingHead serial=66356 13:34:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:34:12 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:34:13 Point started: ret=0 13:34:13 point_skyscan result=0 13:34:13 Check angles 13:34:13 SkyScan query 13:34:14 SkyScan query done: ret=0 az=90.195<-6013 ze=157.5<-1500 Statuses=0009 0009 13:34:14 Msec=0 True Az=90.195 Ze=157.5 Az status=0009 Ze status=0009 13:34:14 Check angles 13:34:14 SkyScan query 13:34:15 SkyScan query done: ret=0 az=72.33<-4822 ze=136.11<-2926 Statuses=0009 0009 13:34:15 Msec=750 True Az=72.33 Ze=136.11 Az status=0009 Ze status=0009 13:34:15 Check angles 13:34:15 SkyScan query 13:34:16 SkyScan query done: ret=0 az=54.975<-3665 ze=115.17<-4322 Statuses=0009 0009 13:34:16 Msec=1500 True Az=54.975 Ze=115.17 Az status=0009 Ze status=0009 13:34:16 Check angles 13:34:16 SkyScan query 13:34:16 SkyScan query done: ret=0 az=40.875<-2725 ze=94.185<-5721 Statuses=0009 0009 13:34:16 Msec=2250 True Az=40.875 Ze=94.185 Az status=0009 Ze status=0009 13:34:16 Check angles 13:34:16 SkyScan query 13:34:17 SkyScan query done: ret=0 az=40.995<-2733 ze=73.23<-7118 Statuses=0008 0009 13:34:17 Msec=3000 True Az=40.995 Ze=73.23 Az status=0008 Ze status=0009 13:34:17 Check angles 13:34:17 SkyScan query 13:34:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.725<-8485 Statuses=0008 0009 13:34:18 Msec=3750 True Az=40.995 Ze=52.725 Az status=0008 Ze status=0009 13:34:18 Check angles 13:34:18 SkyScan query 13:34:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:34:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:34:19 Message to Master queued w/err=0: serial=66356 error=0 13:34:24 Received message from Master: op=Filter serial=66357 13:34:24 Color wheel filter change from 0 to 0 13:34:24 FLIGetFilterPos err=0 currentPosition=0 13:34:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:34:24 Filter is already there-color wheel unchanged 13:34:24 Received message from Master: op=Shutter serial=66358 13:34:24 Shutter LASER close 13:34:24 Received message from Camera: op=State serial=66360 13:34:24 GetSingleValue result=40 Value=cccccccc 13:34:24 SkyScan query 13:34:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:34:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:24 Parameters OK 13:34:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:24 Set A/D data flow result=40 13:34:24 Set A/D channel type result=40 13:34:24 Set A/D encoding result=40 13:34:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:24 Set channel filter=0.000000e+000 result=40 13:34:24 Config A/D Result=40 13:34:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:24 Get A/D filter: -9.255963e+061 result=40 13:34:24 Get A/D value=-858993460 result=40 13:34:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:24 Parameters OK 13:34:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:24 Set A/D data flow result=40 13:34:24 Set A/D channel type result=40 13:34:24 Set A/D encoding result=40 13:34:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:24 Set channel filter=0.000000e+000 result=40 13:34:24 Config A/D Result=40 13:34:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:24 Get A/D filter: -9.255963e+061 result=40 13:34:24 Get A/D value=-858993460 result=40 13:34:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:34:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:34:24 Aux= 13:34:24 Message to Camera, serial 66360 queued 13:35:01 Received message from Master: op=PointingHead serial=66373 13:35:01 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:35:01 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:35:02 Point started: ret=0 13:35:02 point_skyscan result=0 13:35:02 Check angles 13:35:02 SkyScan query 13:35:03 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 13:35:03 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 13:35:03 Check angles 13:35:03 SkyScan query 13:35:04 SkyScan query done: ret=0 az=82.005<-5467 ze=66.51<-7566 Statuses=0009 0008 13:35:04 Msec=750 True Az=82.005 Ze=66.51 Az status=0009 Ze status=0008 13:35:04 Check angles 13:35:04 SkyScan query 13:35:04 SkyScan query done: ret=0 az=99.63<-6642 ze=66.495<-7567 Statuses=0009 0008 13:35:04 Msec=1500 True Az=99.63 Ze=66.495 Az status=0009 Ze status=0008 13:35:05 Check angles 13:35:05 SkyScan query 13:35:05 SkyScan query done: ret=0 az=117.03<-7802 ze=66.495<-7567 Statuses=0009 0008 13:35:05 Msec=2250 True Az=117.03 Ze=66.495 Az status=0009 Ze status=0008 13:35:05 Check angles 13:35:05 SkyScan query 13:35:06 SkyScan query done: ret=0 az=134.445<-8963 ze=66.495<-7567 Statuses=0009 0008 13:35:06 Msec=3000 True Az=134.445 Ze=66.495 Az status=0009 Ze status=0008 13:35:06 Check angles 13:35:06 SkyScan query 13:35:07 SkyScan query done: ret=0 az=152.025<-10135 ze=66.495<-7567 Statuses=0009 0008 13:35:07 Msec=3750 True Az=152.025 Ze=66.495 Az status=0009 Ze status=0008 13:35:07 Check angles 13:35:07 SkyScan query 13:35:07 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 13:35:07 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 13:35:07 Message to Master queued w/err=0: serial=66373 error=0 13:35:12 Received message from Master: op=Filter serial=66374 13:35:12 Color wheel filter change from 0 to 0 13:35:12 FLIGetFilterPos err=0 currentPosition=0 13:35:12 FLIGetStepsRemaining err=0 RemainingSteps=0 13:35:12 Filter is already there-color wheel unchanged 13:35:13 Received message from Master: op=Shutter serial=66375 13:35:13 Shutter LASER close 13:35:13 Received message from Camera: op=State serial=66377 13:35:13 GetSingleValue result=40 Value=cccccccc 13:35:13 SkyScan query 13:35:13 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:35:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:13 Parameters OK 13:35:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:13 Set A/D data flow result=40 13:35:13 Set A/D channel type result=40 13:35:13 Set A/D encoding result=40 13:35:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:13 Set channel filter=0.000000e+000 result=40 13:35:13 Config A/D Result=40 13:35:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:13 Get A/D filter: -9.255963e+061 result=40 13:35:13 Get A/D value=-858993460 result=40 13:35:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:13 Parameters OK 13:35:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:13 Set A/D data flow result=40 13:35:13 Set A/D channel type result=40 13:35:13 Set A/D encoding result=40 13:35:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:13 Set channel filter=0.000000e+000 result=40 13:35:13 Config A/D Result=40 13:35:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:13 Get A/D filter: -9.255963e+061 result=40 13:35:13 Get A/D value=-858993460 result=40 13:35:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:13 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:35:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:35:13 Aux= 13:35:13 Message to Camera, serial 66377 queued 13:35:50 Received message from Master: op=PointingHead serial=66390 13:35:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:35:50 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:35:50 Point started: ret=0 13:35:50 point_skyscan result=0 13:35:51 Check angles 13:35:51 SkyScan query 13:35:52 SkyScan query done: ret=0 az=135.135<-9009 ze=36.855<-9543 Statuses=0009 0009 13:35:52 Msec=0 True Az=135.135 Ze=36.855 Az status=0009 Ze status=0009 13:35:52 Check angles 13:35:52 SkyScan query 13:35:53 SkyScan query done: ret=0 az=117.66<-7844 ze=15.9<-10940 Statuses=0009 0009 13:35:53 Msec=750 True Az=117.66 Ze=15.9 Az status=0009 Ze status=0009 13:35:53 Check angles [UTC 2018-12-11 13:35:53] 13:35:53 SkyScan query 13:35:53 SkyScan query done: ret=0 az=98.76<-6584 ze=-6.825<-12455 Statuses=0009 0009 13:35:53 Msec=1500 True Az=98.76 Ze=-6.825 Az status=0009 Ze status=0009 13:35:53 Check angles 13:35:53 SkyScan query 13:35:54 SkyScan query done: ret=0 az=82.77<-5518 ze=-26.01<-13734 Statuses=0009 0009 13:35:54 Msec=2250 True Az=82.77 Ze=-26.01 Az status=0009 Ze status=0009 [UTC 2018-12-11 13:35:54] 13:35:54 Check angles 13:35:54 SkyScan query 13:35:55 SkyScan query done: ret=0 az=65.265<-4351 ze=-38.58<-14572 Statuses=0009 0008 13:35:55 Msec=3000 True Az=65.265 Ze=-38.58 Az status=0009 Ze status=0008 13:35:55 Check angles 13:35:55 SkyScan query 13:35:56 SkyScan query done: ret=0 az=47.355<-3157 ze=-38.52<-14568 Statuses=0009 0008 13:35:56 Msec=3750 True Az=47.355 Ze=-38.52 Az status=0009 Ze status=0008 13:35:56 Check angles 13:35:56 SkyScan query 13:35:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:35:56 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:35:56 Message to Master queued w/err=0: serial=66390 error=0 13:36:01 Received message from Master: op=Filter serial=66391 13:36:01 Color wheel filter change from 0 to 0 13:36:01 FLIGetFilterPos err=0 currentPosition=0 13:36:01 FLIGetStepsRemaining err=0 RemainingSteps=0 13:36:01 Filter is already there-color wheel unchanged 13:36:01 Received message from Master: op=Shutter serial=66392 13:36:01 Shutter LASER close 13:36:01 Received message from Camera: op=State serial=66394 13:36:01 GetSingleValue result=40 Value=cccccccc 13:36:01 SkyScan query 13:36:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:36:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:02 Parameters OK 13:36:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:02 Set A/D data flow result=40 13:36:02 Set A/D channel type result=40 13:36:02 Set A/D encoding result=40 13:36:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:02 Set channel filter=0.000000e+000 result=40 13:36:02 Config A/D Result=40 13:36:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:02 Get A/D filter: -9.255963e+061 result=40 13:36:02 Get A/D value=-858993460 result=40 13:36:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:02 Parameters OK 13:36:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:02 Set A/D data flow result=40 13:36:02 Set A/D channel type result=40 13:36:02 Set A/D encoding result=40 13:36:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:02 Set channel filter=0.000000e+000 result=40 13:36:02 Config A/D Result=40 13:36:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:02 Get A/D filter: -9.255963e+061 result=40 13:36:02 Get A/D value=-858993460 result=40 13:36:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:36:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:36:02 Aux= 13:36:02 Message to Camera, serial 66394 queued 13:36:39 Received message from Master: op=PointingHead serial=66407 13:36:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:36:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:36:39 Point started: ret=0 13:36:39 point_skyscan result=0 13:36:40 Check angles 13:36:40 SkyScan query 13:36:41 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.235<-16549 Statuses=0009 0009 13:36:41 Msec=0 True Az=64.005 Ze=-68.235 Az status=0009 Ze status=0009 13:36:41 Check angles 13:36:41 SkyScan query 13:36:41 SkyScan query done: ret=0 az=81.78<-5452 ze=-89.715<-17981 Statuses=0009 0009 13:36:41 Msec=750 True Az=81.78 Ze=-89.715 Az status=0009 Ze status=0009 13:36:42 Check angles 13:36:42 SkyScan query 13:36:42 SkyScan query done: ret=0 az=99.375<-6625 ze=-110.625<-19375 Statuses=0009 0009 13:36:42 Msec=1500 True Az=99.375 Ze=-110.625 Az status=0009 Ze status=0009 13:36:42 Check angles 13:36:42 SkyScan query 13:36:43 SkyScan query done: ret=0 az=116.91<-7794 ze=-131.55<-20770 Statuses=0009 0009 13:36:43 Msec=2250 True Az=116.91 Ze=-131.55 Az status=0009 Ze status=0009 13:36:43 Check angles 13:36:43 SkyScan query 13:36:44 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.555<-21437 Statuses=0009 0008 13:36:44 Msec=3000 True Az=131.115 Ze=-141.555 Az status=0009 Ze status=0008 13:36:44 Check angles 13:36:44 SkyScan query 13:36:44 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 13:36:44 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 13:36:44 Message to Master queued w/err=0: serial=66407 error=0 13:36:49 Received message from Master: op=Filter serial=66408 13:36:49 Color wheel filter change from 0 to 0 13:36:49 FLIGetFilterPos err=0 currentPosition=0 13:36:49 FLIGetStepsRemaining err=0 RemainingSteps=0 13:36:49 Filter is already there-color wheel unchanged 13:36:50 Received message from Master: op=Shutter serial=66409 13:36:50 Shutter LASER close 13:36:50 Received message from Camera: op=State serial=66411 13:36:50 GetSingleValue result=40 Value=cccccccc 13:36:50 SkyScan query 13:36:50 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:36:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:50 Parameters OK 13:36:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:50 Set A/D data flow result=40 13:36:50 Set A/D channel type result=40 13:36:50 Set A/D encoding result=40 13:36:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:50 Set channel filter=0.000000e+000 result=40 13:36:50 Config A/D Result=40 13:36:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:50 Get A/D filter: -9.255963e+061 result=40 13:36:50 Get A/D value=-858993460 result=40 13:36:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:50 Parameters OK 13:36:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:50 Set A/D data flow result=40 13:36:50 Set A/D channel type result=40 13:36:50 Set A/D encoding result=40 13:36:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:50 Set channel filter=0.000000e+000 result=40 13:36:50 Config A/D Result=40 13:36:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:50 Get A/D filter: -9.255963e+061 result=40 13:36:50 Get A/D value=-858993460 result=40 13:36:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:50 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:36:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:36:50 Aux= 13:36:50 Message to Camera, serial 66411 queued 13:37:26 Received message from Master: op=PointingHead serial=66423 13:37:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:37:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:37:26 Point started: ret=0 13:37:26 point_skyscan result=0 13:37:27 Check angles 13:37:27 SkyScan query 13:37:28 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.27<-23418 Statuses=0009 0009 13:37:28 Msec=0 True Az=113.01 Ze=-171.27 Az status=0009 Ze status=0009 13:37:28 Check angles 13:37:28 SkyScan query 13:37:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:37:29 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:37:29 Message to Master queued w/err=0: serial=66423 error=0 13:37:34 Received message from Master: op=Filter serial=66424 13:37:34 Color wheel filter change from 0 to 0 13:37:34 FLIGetFilterPos err=0 currentPosition=0 13:37:34 FLIGetStepsRemaining err=0 RemainingSteps=0 13:37:34 Filter is already there-color wheel unchanged 13:37:34 Received message from Master: op=Shutter serial=66425 13:37:34 Shutter LASER open 13:37:34 Received message from Camera: op=State serial=66427 13:37:34 GetSingleValue result=40 Value=cccccccc 13:37:34 SkyScan query 13:37:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:37:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:34 Parameters OK 13:37:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:34 Set A/D data flow result=40 13:37:34 Set A/D channel type result=40 13:37:34 Set A/D encoding result=40 13:37:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:34 Set channel filter=0.000000e+000 result=40 13:37:34 Config A/D Result=40 13:37:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:34 Get A/D filter: -9.255963e+061 result=40 13:37:34 Get A/D value=-858993460 result=40 13:37:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:34 Parameters OK 13:37:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:34 Set A/D data flow result=40 13:37:34 Set A/D channel type result=40 13:37:34 Set A/D encoding result=40 13:37:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:34 Set channel filter=0.000000e+000 result=40 13:37:34 Config A/D Result=40 13:37:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:34 Get A/D filter: -9.255963e+061 result=40 13:37:34 Get A/D value=-858993460 result=40 13:37:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:37:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:37:34 Aux= 13:37:34 Message to Camera, serial 66427 queued 13:37:43 Received message from Master: op=Shutter serial=66437 13:37:43 Shutter LASER close 13:37:44 Received message from Master: op=PointingHead serial=66441 13:37:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:37:44 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:37:44 Point started: ret=0 13:37:44 point_skyscan result=0 13:37:45 Check angles 13:37:45 SkyScan query 13:37:45 SkyScan query done: ret=0 az=135.795<-9053 ze=-143.355<-21557 Statuses=0009 0009 13:37:45 Msec=0 True Az=135.795 Ze=-143.355 Az status=0009 Ze status=0009 13:37:45 Check angles 13:37:45 SkyScan query 13:37:46 SkyScan query done: ret=0 az=153.375<-10225 ze=-122.385<-20159 Statuses=0009 0009 13:37:46 Msec=750 True Az=153.375 Ze=-122.385 Az status=0009 Ze status=0009 13:37:46 Check angles 13:37:46 SkyScan query 13:37:47 SkyScan query done: ret=0 az=170.85<-11390 ze=-101.505<-18767 Statuses=0009 0009 13:37:47 Msec=1500 True Az=170.85 Ze=-101.505 Az status=0009 Ze status=0009 13:37:47 Check angles 13:37:47 SkyScan query 13:37:47 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.1<-17340 Statuses=0008 0009 13:37:47 Msec=2250 True Az=176.025 Ze=-80.1 Az status=0008 Ze status=0009 13:37:48 Check angles 13:37:48 SkyScan query 13:37:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.085<-15939 Statuses=0008 0009 13:37:48 Msec=3000 True Az=175.995 Ze=-59.085 Az status=0008 Ze status=0009 13:37:48 Check angles 13:37:48 SkyScan query 13:37:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:37:49 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:37:49 Message to Master queued w/err=0: serial=66441 error=0 13:37:54 Received message from Master: op=Filter serial=66442 13:37:54 Color wheel filter change from 0 to 0 13:37:54 FLIGetFilterPos err=0 currentPosition=0 13:37:54 FLIGetStepsRemaining err=0 RemainingSteps=0 13:37:54 Filter is already there-color wheel unchanged 13:37:54 Received message from Master: op=Shutter serial=66443 13:37:54 Shutter LASER close 13:37:54 Received message from Camera: op=State serial=66445 13:37:54 GetSingleValue result=40 Value=cccccccc 13:37:54 SkyScan query 13:37:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:37:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:55 Parameters OK 13:37:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:55 Set A/D data flow result=40 13:37:55 Set A/D channel type result=40 13:37:55 Set A/D encoding result=40 13:37:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:55 Set channel filter=0.000000e+000 result=40 13:37:55 Config A/D Result=40 13:37:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:55 Get A/D filter: -9.255963e+061 result=40 13:37:55 Get A/D value=-858993460 result=40 13:37:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:55 Parameters OK 13:37:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:55 Set A/D data flow result=40 13:37:55 Set A/D channel type result=40 13:37:55 Set A/D encoding result=40 13:37:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:55 Set channel filter=0.000000e+000 result=40 13:37:55 Config A/D Result=40 13:37:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:55 Get A/D filter: -9.255963e+061 result=40 13:37:55 Get A/D value=-858993460 result=40 13:37:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:37:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:37:55 Aux= 13:37:55 Message to Camera, serial 66445 queued 13:38:32 Received message from Master: op=PointingHead serial=66458 13:38:32 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:38:32 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:38:32 Point started: ret=0 13:38:32 point_skyscan result=0 13:38:33 Check angles 13:38:33 SkyScan query 13:38:33 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.72<-13448 Statuses=0009 0009 13:38:33 Msec=0 True Az=152.97 Ze=-21.72 Az status=0009 Ze status=0009 13:38:34 Check angles 13:38:34 SkyScan query 13:38:34 SkyScan query done: ret=0 az=135.495<-9033 ze=-0.795<-12053 Statuses=0009 0009 13:38:34 Msec=750 True Az=135.495 Ze=-0.795 Az status=0009 Ze status=0009 13:38:34 Check angles 13:38:34 SkyScan query 13:38:35 SkyScan query done: ret=0 az=117.54<-7836 ze=20.61<-10626 Statuses=0009 0009 13:38:35 Msec=1500 True Az=117.54 Ze=20.61 Az status=0009 Ze status=0009 13:38:35 Check angles 13:38:35 SkyScan query 13:38:36 SkyScan query done: ret=0 az=100.125<-6675 ze=41.565<-9229 Statuses=0009 0009 13:38:36 Msec=2250 True Az=100.125 Ze=41.565 Az status=0009 Ze status=0009 13:38:36 Check angles 13:38:36 SkyScan query 13:38:36 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 13:38:36 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 13:38:37 Check angles 13:38:37 SkyScan query 13:38:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:38:37 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:38:37 Message to Master queued w/err=0: serial=66458 error=0 13:38:42 Received message from Master: op=Filter serial=66459 13:38:42 Color wheel filter change from 0 to 0 13:38:42 FLIGetFilterPos err=0 currentPosition=0 13:38:42 FLIGetStepsRemaining err=0 RemainingSteps=0 13:38:42 Filter is already there-color wheel unchanged 13:38:42 Received message from Master: op=Shutter serial=66460 13:38:42 Shutter LASER close 13:38:42 Received message from Camera: op=State serial=66462 13:38:42 GetSingleValue result=40 Value=cccccccc 13:38:42 SkyScan query 13:38:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:38:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:43 Parameters OK 13:38:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:43 Set A/D data flow result=40 13:38:43 Set A/D channel type result=40 13:38:43 Set A/D encoding result=40 13:38:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:43 Set channel filter=0.000000e+000 result=40 13:38:43 Config A/D Result=40 13:38:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:43 Get A/D filter: -9.255963e+061 result=40 13:38:43 Get A/D value=-858993460 result=40 13:38:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:43 Parameters OK 13:38:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:43 Set A/D data flow result=40 13:38:43 Set A/D channel type result=40 13:38:43 Set A/D encoding result=40 13:38:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:43 Set channel filter=0.000000e+000 result=40 13:38:43 Config A/D Result=40 13:38:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:43 Get A/D filter: -9.255963e+061 result=40 13:38:43 Get A/D value=-858993460 result=40 13:38:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:38:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:38:43 Aux= 13:38:43 Message to Camera, serial 66462 queued 13:39:19 Received message from Master: op=PointingHead serial=66474 13:39:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:39:19 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:39:19 Point started: ret=0 13:39:19 point_skyscan result=0 13:39:20 Check angles 13:39:20 SkyScan query 13:39:21 SkyScan query done: ret=0 az=108.93<-7262 ze=38.49<-9434 Statuses=0009 0008 13:39:21 Msec=0 True Az=108.93 Ze=38.49 Az status=0009 Ze status=0008 13:39:21 Check angles 13:39:21 SkyScan query 13:39:21 SkyScan query done: ret=0 az=126.48<-8432 ze=38.505<-9433 Statuses=0009 0008 13:39:21 Msec=750 True Az=126.48 Ze=38.505 Az status=0009 Ze status=0008 13:39:21 Check angles 13:39:21 SkyScan query 13:39:22 SkyScan query done: ret=0 az=143.895<-9593 ze=38.505<-9433 Statuses=0009 0008 13:39:22 Msec=1500 True Az=143.895 Ze=38.505 Az status=0009 Ze status=0008 13:39:22 Check angles 13:39:22 SkyScan query 13:39:23 SkyScan query done: ret=0 az=161.7<-10780 ze=38.505<-9433 Statuses=0009 0008 13:39:23 Msec=2250 True Az=161.7 Ze=38.505 Az status=0009 Ze status=0008 13:39:23 Check angles 13:39:23 SkyScan query 13:39:24 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 13:39:24 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 13:39:24 Check angles 13:39:24 SkyScan query 13:39:24 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:39:24 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:39:24 Message to Master queued w/err=0: serial=66474 error=0 13:39:29 Received message from Master: op=Filter serial=66475 13:39:29 Color wheel filter change from 0 to 0 13:39:29 FLIGetFilterPos err=0 currentPosition=0 13:39:29 FLIGetStepsRemaining err=0 RemainingSteps=0 13:39:29 Filter is already there-color wheel unchanged 13:39:29 Received message from Master: op=Shutter serial=66476 13:39:29 Shutter LASER close 13:39:30 Received message from Camera: op=State serial=66478 13:39:30 GetSingleValue result=40 Value=cccccccc 13:39:30 SkyScan query 13:39:30 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:39:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:30 Parameters OK 13:39:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:30 Set A/D data flow result=40 13:39:30 Set A/D channel type result=40 13:39:30 Set A/D encoding result=40 13:39:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:30 Set channel filter=0.000000e+000 result=40 13:39:30 Config A/D Result=40 13:39:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:30 Get A/D filter: -9.255963e+061 result=40 13:39:30 Get A/D value=-858993460 result=40 13:39:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:30 Parameters OK 13:39:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:30 Set A/D data flow result=40 13:39:30 Set A/D channel type result=40 13:39:30 Set A/D encoding result=40 13:39:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:30 Set channel filter=0.000000e+000 result=40 13:39:30 Config A/D Result=40 13:39:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:30 Get A/D filter: -9.255963e+061 result=40 13:39:30 Get A/D value=-858993460 result=40 13:39:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:39:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:39:30 Aux= 13:39:30 Message to Camera, serial 66478 queued 13:40:07 Received message from Master: op=PointingHead serial=66491 13:40:07 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:40:07 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:40:07 Point started: ret=0 13:40:07 point_skyscan result=0 13:40:08 Check angles 13:40:08 SkyScan query 13:40:09 SkyScan query done: ret=0 az=152.79<-10186 ze=8.535<-11431 Statuses=0009 0009 13:40:09 Msec=0 True Az=152.79 Ze=8.535 Az status=0009 Ze status=0009 13:40:09 Check angles 13:40:09 SkyScan query 13:40:09 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.42<-12828 Statuses=0009 0009 13:40:09 Msec=750 True Az=135.375 Ze=-12.42 Az status=0009 Ze status=0009 13:40:10 Check angles 13:40:10 SkyScan query 13:40:10 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.36<-14224 Statuses=0009 0009 13:40:10 Msec=1500 True Az=117.795 Ze=-33.36 Az status=0009 Ze status=0009 13:40:10 Check angles 13:40:10 SkyScan query 13:40:11 SkyScan query done: ret=0 az=100.35<-6690 ze=-51.54<-15436 Statuses=0009 0009 13:40:11 Msec=2250 True Az=100.35 Ze=-51.54 Az status=0009 Ze status=0009 13:40:11 Check angles 13:40:11 SkyScan query 13:40:12 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 13:40:12 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 13:40:12 Check angles 13:40:12 SkyScan query 13:40:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:40:12 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:40:12 Message to Master queued w/err=0: serial=66491 error=0 13:40:17 Received message from Master: op=Filter serial=66492 13:40:17 Color wheel filter change from 0 to 0 13:40:17 FLIGetFilterPos err=0 currentPosition=0 13:40:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:40:17 Filter is already there-color wheel unchanged 13:40:18 Received message from Master: op=Shutter serial=66493 13:40:18 Shutter LASER close 13:40:18 Received message from Camera: op=State serial=66495 13:40:18 GetSingleValue result=40 Value=cccccccc 13:40:18 SkyScan query 13:40:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:40:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:18 Parameters OK 13:40:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:18 Set A/D data flow result=40 13:40:18 Set A/D channel type result=40 13:40:18 Set A/D encoding result=40 13:40:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:18 Set channel filter=0.000000e+000 result=40 13:40:18 Config A/D Result=40 13:40:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:18 Get A/D filter: -9.255963e+061 result=40 13:40:18 Get A/D value=-858993460 result=40 13:40:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:18 Parameters OK 13:40:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:18 Set A/D data flow result=40 13:40:18 Set A/D channel type result=40 13:40:18 Set A/D encoding result=40 13:40:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:18 Set channel filter=0.000000e+000 result=40 13:40:18 Config A/D Result=40 13:40:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:18 Get A/D filter: -9.255963e+061 result=40 13:40:18 Get A/D value=-858993460 result=40 13:40:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:40:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:40:18 Aux= 13:40:18 Message to Camera, serial 66495 queued 13:40:55 Received message from Master: op=PointingHead serial=66508 13:40:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:40:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:40:55 Point started: ret=0 13:40:55 point_skyscan result=0 13:40:56 Check angles 13:40:56 SkyScan query 13:40:57 SkyScan query done: ret=0 az=109.095<-7273 ze=-81.675<-17445 Statuses=0009 0009 13:40:57 Msec=0 True Az=109.095 Ze=-81.675 Az status=0009 Ze status=0009 13:40:57 Check angles 13:40:57 SkyScan query 13:40:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.63<-18842 Statuses=0008 0009 13:40:57 Msec=750 True Az=112.995 Ze=-102.63 Az status=0008 Ze status=0009 13:40:58 Check angles 13:40:58 SkyScan query 13:40:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.585<-20239 Statuses=0008 0009 13:40:58 Msec=1500 True Az=112.995 Ze=-123.585 Az status=0008 Ze status=0009 13:40:58 Check angles 13:40:58 SkyScan query 13:40:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.555<-21637 Statuses=0008 0009 13:40:59 Msec=2250 True Az=112.995 Ze=-144.555 Az status=0008 Ze status=0009 13:40:59 Check angles 13:40:59 SkyScan query 13:41:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.495<-23033 Statuses=0008 0009 13:41:00 Msec=3000 True Az=112.995 Ze=-165.495 Az status=0008 Ze status=0009 13:41:00 Check angles 13:41:00 SkyScan query 13:41:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:41:00 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:41:00 Message to Master queued w/err=0: serial=66508 error=0 13:41:05 Received message from Master: op=Filter serial=66509 13:41:05 Color wheel filter change from 0 to 0 13:41:05 FLIGetFilterPos err=0 currentPosition=0 13:41:05 FLIGetStepsRemaining err=0 RemainingSteps=0 13:41:05 Filter is already there-color wheel unchanged 13:41:06 Received message from Master: op=Shutter serial=66510 13:41:06 Shutter LASER open 13:41:06 Received message from Camera: op=State serial=66512 13:41:06 GetSingleValue result=40 Value=cccccccc 13:41:06 SkyScan query 13:41:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:41:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:06 Parameters OK 13:41:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:06 Set A/D data flow result=40 13:41:06 Set A/D channel type result=40 13:41:06 Set A/D encoding result=40 13:41:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:06 Set channel filter=0.000000e+000 result=40 13:41:06 Config A/D Result=40 13:41:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:06 Get A/D filter: -9.255963e+061 result=40 13:41:06 Get A/D value=-858993460 result=40 13:41:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:06 Parameters OK 13:41:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:06 Set A/D data flow result=40 13:41:06 Set A/D channel type result=40 13:41:06 Set A/D encoding result=40 13:41:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:06 Set channel filter=0.000000e+000 result=40 13:41:06 Config A/D Result=40 13:41:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:06 Get A/D filter: -9.255963e+061 result=40 13:41:06 Get A/D value=-858993460 result=40 13:41:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:41:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:41:06 Aux= 13:41:06 Message to Camera, serial 66512 queued 13:41:15 Received message from Master: op=Shutter serial=66522 13:41:15 Shutter LASER close 13:41:15 Received message from Master: op=PointingHead serial=66526 13:41:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:41:15 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:41:16 Point started: ret=0 13:41:16 point_skyscan result=0 13:41:16 Check angles 13:41:16 SkyScan query 13:41:17 SkyScan query done: ret=0 az=89.88<-5992 ze=157.32<-1512 Statuses=0009 0009 13:41:17 Msec=0 True Az=89.88 Ze=157.32 Az status=0009 Ze status=0009 13:41:17 Check angles 13:41:17 SkyScan query 13:41:18 SkyScan query done: ret=0 az=72.015<-4801 ze=135.885<-2941 Statuses=0009 0009 13:41:18 Msec=750 True Az=72.015 Ze=135.885 Az status=0009 Ze status=0009 13:41:18 Check angles 13:41:18 SkyScan query 13:41:18 SkyScan query done: ret=0 az=54.825<-3655 ze=114.975<-4335 Statuses=0009 0009 13:41:18 Msec=1500 True Az=54.825 Ze=114.975 Az status=0009 Ze status=0009 13:41:19 Check angles 13:41:19 SkyScan query 13:41:19 SkyScan query done: ret=0 az=40.89<-2726 ze=93.99<-5734 Statuses=0009 0009 13:41:19 Msec=2250 True Az=40.89 Ze=93.99 Az status=0009 Ze status=0009 13:41:19 Check angles 13:41:19 SkyScan query 13:41:20 SkyScan query done: ret=0 az=40.995<-2733 ze=73.035<-7131 Statuses=0008 0009 13:41:20 Msec=3000 True Az=40.995 Ze=73.035 Az status=0008 Ze status=0009 13:41:20 Check angles 13:41:20 SkyScan query 13:41:21 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 13:41:21 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 13:41:21 Check angles 13:41:21 SkyScan query 13:41:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:41:21 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:41:21 Message to Master queued w/err=0: serial=66526 error=0 13:41:26 Received message from Master: op=Filter serial=66527 13:41:26 Color wheel filter change from 0 to 0 13:41:26 FLIGetFilterPos err=0 currentPosition=0 13:41:26 FLIGetStepsRemaining err=0 RemainingSteps=0 13:41:26 Filter is already there-color wheel unchanged 13:41:27 Received message from Master: op=Shutter serial=66528 13:41:27 Shutter LASER close 13:41:27 Received message from Camera: op=State serial=66530 13:41:27 GetSingleValue result=40 Value=cccccccc 13:41:27 SkyScan query 13:41:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:41:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:27 Parameters OK 13:41:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:27 Set A/D data flow result=40 13:41:27 Set A/D channel type result=40 13:41:27 Set A/D encoding result=40 13:41:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:27 Set channel filter=0.000000e+000 result=40 13:41:27 Config A/D Result=40 13:41:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:27 Get A/D filter: -9.255963e+061 result=40 13:41:27 Get A/D value=-858993460 result=40 13:41:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:27 Parameters OK 13:41:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:27 Set A/D data flow result=40 13:41:27 Set A/D channel type result=40 13:41:27 Set A/D encoding result=40 13:41:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:27 Set channel filter=0.000000e+000 result=40 13:41:27 Config A/D Result=40 13:41:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:27 Get A/D filter: -9.255963e+061 result=40 13:41:27 Get A/D value=-858993460 result=40 13:41:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:41:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:41:27 Aux= 13:41:27 Message to Camera, serial 66530 queued 13:42:04 Received message from Master: op=PointingHead serial=66543 13:42:04 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:42:04 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:42:05 Point started: ret=0 13:42:05 point_skyscan result=0 13:42:05 Check angles 13:42:05 SkyScan query 13:42:06 SkyScan query done: ret=0 az=63.96<-4264 ze=66.57<-7562 Statuses=0009 0008 13:42:06 Msec=0 True Az=63.96 Ze=66.57 Az status=0009 Ze status=0008 13:42:06 Check angles 13:42:06 SkyScan query 13:42:07 SkyScan query done: ret=0 az=81.81<-5454 ze=66.525<-7565 Statuses=0009 0008 13:42:07 Msec=750 True Az=81.81 Ze=66.525 Az status=0009 Ze status=0008 13:42:07 Check angles 13:42:07 SkyScan query 13:42:07 SkyScan query done: ret=0 az=99.375<-6625 ze=66.51<-7566 Statuses=0009 0008 13:42:07 Msec=1500 True Az=99.375 Ze=66.51 Az status=0009 Ze status=0008 13:42:08 Check angles 13:42:08 SkyScan query 13:42:08 SkyScan query done: ret=0 az=116.88<-7792 ze=66.51<-7566 Statuses=0009 0008 13:42:08 Msec=2250 True Az=116.88 Ze=66.51 Az status=0009 Ze status=0008 13:42:08 Check angles 13:42:08 SkyScan query 13:42:09 SkyScan query done: ret=0 az=134.355<-8957 ze=66.51<-7566 Statuses=0009 0008 13:42:09 Msec=3000 True Az=134.355 Ze=66.51 Az status=0009 Ze status=0008 13:42:09 Check angles 13:42:09 SkyScan query 13:42:10 SkyScan query done: ret=0 az=151.83<-10122 ze=66.51<-7566 Statuses=0009 0008 13:42:10 Msec=3750 True Az=151.83 Ze=66.51 Az status=0009 Ze status=0008 13:42:10 Check angles 13:42:10 SkyScan query 13:42:10 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 13:42:10 Msec=4500 True Az=157.995 Ze=66.51 Az status=0008 Ze status=0008 13:42:10 Message to Master queued w/err=0: serial=66543 error=0 13:42:15 Received message from Master: op=Filter serial=66544 13:42:15 Color wheel filter change from 0 to 0 13:42:15 FLIGetFilterPos err=0 currentPosition=0 13:42:15 FLIGetStepsRemaining err=0 RemainingSteps=0 13:42:15 Filter is already there-color wheel unchanged 13:42:16 Received message from Master: op=Shutter serial=66545 13:42:16 Shutter LASER close 13:42:16 Received message from Camera: op=State serial=66547 13:42:16 GetSingleValue result=40 Value=cccccccc 13:42:16 SkyScan query 13:42:16 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 13:42:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:16 Parameters OK 13:42:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:16 Set A/D data flow result=40 13:42:16 Set A/D channel type result=40 13:42:16 Set A/D encoding result=40 13:42:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:16 Set channel filter=0.000000e+000 result=40 13:42:16 Config A/D Result=40 13:42:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:16 Get A/D filter: -9.255963e+061 result=40 13:42:16 Get A/D value=-858993460 result=40 13:42:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:16 Parameters OK 13:42:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:16 Set A/D data flow result=40 13:42:16 Set A/D channel type result=40 13:42:16 Set A/D encoding result=40 13:42:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:16 Set channel filter=0.000000e+000 result=40 13:42:16 Config A/D Result=40 13:42:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:16 Get A/D filter: -9.255963e+061 result=40 13:42:16 Get A/D value=-858993460 result=40 13:42:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:16 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:42:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:42:16 Aux= 13:42:16 Message to Camera, serial 66547 queued 13:42:53 Received message from Master: op=PointingHead serial=66560 13:42:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:42:53 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:42:53 Point started: ret=0 13:42:53 point_skyscan result=0 13:42:54 Check angles 13:42:54 SkyScan query 13:42:55 SkyScan query done: ret=0 az=134.76<-8984 ze=36.465<-9569 Statuses=0009 0009 13:42:55 Msec=0 True Az=134.76 Ze=36.465 Az status=0009 Ze status=0009 13:42:55 Check angles 13:42:55 SkyScan query 13:42:55 SkyScan query done: ret=0 az=117.315<-7821 ze=15.555<-10963 Statuses=0009 0009 13:42:55 Msec=750 True Az=117.315 Ze=15.555 Az status=0009 Ze status=0009 13:42:56 Check angles 13:42:56 SkyScan query 13:42:56 SkyScan query done: ret=0 az=99.93<-6662 ze=-5.445<-12363 Statuses=0009 0009 13:42:56 Msec=1500 True Az=99.93 Ze=-5.445 Az status=0009 Ze status=0009 13:42:56 Check angles 13:42:56 SkyScan query 13:42:57 SkyScan query done: ret=0 az=82.425<-5495 ze=-26.385<-13759 Statuses=0009 0009 13:42:57 Msec=2250 True Az=82.425 Ze=-26.385 Az status=0009 Ze status=0009 13:42:57 Check angles 13:42:57 SkyScan query 13:42:58 SkyScan query done: ret=0 az=64.86<-4324 ze=-38.58<-14572 Statuses=0009 0008 13:42:58 Msec=3000 True Az=64.86 Ze=-38.58 Az status=0009 Ze status=0008 13:42:58 Check angles 13:42:58 SkyScan query 13:42:58 SkyScan query done: ret=0 az=47.49<-3166 ze=-38.52<-14568 Statuses=0009 0008 13:42:58 Msec=3750 True Az=47.49 Ze=-38.52 Az status=0009 Ze status=0008 13:42:59 Check angles 13:42:59 SkyScan query 13:42:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:42:59 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:42:59 Message to Master queued w/err=0: serial=66560 error=0 13:43:04 Received message from Master: op=Filter serial=66561 13:43:04 Color wheel filter change from 0 to 0 13:43:04 FLIGetFilterPos err=0 currentPosition=0 13:43:04 FLIGetStepsRemaining err=0 RemainingSteps=0 13:43:04 Filter is already there-color wheel unchanged 13:43:04 Received message from Master: op=Shutter serial=66562 13:43:04 Shutter LASER close 13:43:04 Received message from Camera: op=State serial=66564 13:43:04 GetSingleValue result=40 Value=cccccccc 13:43:04 SkyScan query 13:43:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:43:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:05 Parameters OK 13:43:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:05 Set A/D data flow result=40 13:43:05 Set A/D channel type result=40 13:43:05 Set A/D encoding result=40 13:43:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:05 Set channel filter=0.000000e+000 result=40 13:43:05 Config A/D Result=40 13:43:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:05 Get A/D filter: -9.255963e+061 result=40 13:43:05 Get A/D value=-858993460 result=40 13:43:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:05 Parameters OK 13:43:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:05 Set A/D data flow result=40 13:43:05 Set A/D channel type result=40 13:43:05 Set A/D encoding result=40 13:43:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:05 Set channel filter=0.000000e+000 result=40 13:43:05 Config A/D Result=40 13:43:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:05 Get A/D filter: -9.255963e+061 result=40 13:43:05 Get A/D value=-858993460 result=40 13:43:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:43:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:43:05 Aux= 13:43:05 Message to Camera, serial 66564 queued 13:43:42 Received message from Master: op=PointingHead serial=66577 13:43:42 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:43:42 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:43:42 Point started: ret=0 13:43:42 point_skyscan result=0 13:43:43 Check angles 13:43:43 SkyScan query 13:43:44 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.43<-16562 Statuses=0009 0009 13:43:44 Msec=0 True Az=64.2 Ze=-68.43 Az status=0009 Ze status=0009 13:43:44 Check angles 13:43:44 SkyScan query 13:43:44 SkyScan query done: ret=0 az=81.6<-5440 ze=-89.43<-17962 Statuses=0009 0009 13:43:44 Msec=750 True Az=81.6 Ze=-89.43 Az status=0009 Ze status=0009 13:43:44 Check angles 13:43:44 SkyScan query 13:43:45 SkyScan query done: ret=0 az=99.135<-6609 ze=-110.355<-19357 Statuses=0009 0009 13:43:45 Msec=1500 True Az=99.135 Ze=-110.355 Az status=0009 Ze status=0009 13:43:45 Check angles 13:43:45 SkyScan query 13:43:46 SkyScan query done: ret=0 az=116.73<-7782 ze=-131.31<-20754 Statuses=0009 0009 13:43:46 Msec=2250 True Az=116.73 Ze=-131.31 Az status=0009 Ze status=0009 13:43:46 Check angles 13:43:46 SkyScan query 13:43:47 SkyScan query done: ret=0 az=131.19<-8746 ze=-141.54<-21436 Statuses=0009 0008 13:43:47 Msec=3000 True Az=131.19 Ze=-141.54 Az status=0009 Ze status=0008 13:43:47 Check angles 13:43:47 SkyScan query 13:43:47 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:43:47 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:43:47 Message to Master queued w/err=0: serial=66577 error=0 13:43:52 Received message from Master: op=Filter serial=66578 13:43:52 Color wheel filter change from 0 to 0 13:43:52 FLIGetFilterPos err=0 currentPosition=0 13:43:52 FLIGetStepsRemaining err=0 RemainingSteps=0 13:43:52 Filter is already there-color wheel unchanged 13:43:52 Received message from Master: op=Shutter serial=66579 13:43:52 Shutter LASER close 13:43:52 Received message from Camera: op=State serial=66581 13:43:52 GetSingleValue result=40 Value=cccccccc 13:43:52 SkyScan query 13:43:53 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:43:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:53 Parameters OK 13:43:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:53 Set A/D data flow result=40 13:43:53 Set A/D channel type result=40 13:43:53 Set A/D encoding result=40 13:43:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:53 Set channel filter=0.000000e+000 result=40 13:43:53 Config A/D Result=40 13:43:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:53 Get A/D filter: -9.255963e+061 result=40 13:43:53 Get A/D value=-858993460 result=40 13:43:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:53 Parameters OK 13:43:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:53 Set A/D data flow result=40 13:43:53 Set A/D channel type result=40 13:43:53 Set A/D encoding result=40 13:43:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:53 Set channel filter=0.000000e+000 result=40 13:43:53 Config A/D Result=40 13:43:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:53 Get A/D filter: -9.255963e+061 result=40 13:43:53 Get A/D value=-858993460 result=40 13:43:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:53 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:43:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:43:53 Aux= 13:43:53 Message to Camera, serial 66581 queued 13:44:30 Received message from Master: op=PointingHead serial=66594 13:44:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:44:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:44:30 Point started: ret=0 13:44:30 point_skyscan result=0 13:44:31 Check angles 13:44:31 SkyScan query 13:44:32 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 13:44:32 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 13:44:32 Check angles 13:44:32 SkyScan query 13:44:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:44:32 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:44:32 Message to Master queued w/err=0: serial=66594 error=0 13:44:37 Received message from Master: op=Filter serial=66595 13:44:37 Color wheel filter change from 0 to 0 13:44:37 FLIGetFilterPos err=0 currentPosition=0 13:44:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:44:37 Filter is already there-color wheel unchanged 13:44:37 Received message from Master: op=Shutter serial=66596 13:44:37 Shutter LASER open 13:44:38 Received message from Camera: op=State serial=66598 13:44:38 GetSingleValue result=40 Value=cccccccc 13:44:38 SkyScan query 13:44:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:44:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:38 Parameters OK 13:44:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:38 Set A/D data flow result=40 13:44:38 Set A/D channel type result=40 13:44:38 Set A/D encoding result=40 13:44:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:38 Set channel filter=0.000000e+000 result=40 13:44:38 Config A/D Result=40 13:44:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:38 Get A/D filter: -9.255963e+061 result=40 13:44:38 Get A/D value=-858993460 result=40 13:44:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:38 Parameters OK 13:44:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:38 Set A/D data flow result=40 13:44:38 Set A/D channel type result=40 13:44:38 Set A/D encoding result=40 13:44:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:38 Set channel filter=0.000000e+000 result=40 13:44:38 Config A/D Result=40 13:44:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:38 Get A/D filter: -9.255963e+061 result=40 13:44:38 Get A/D value=-858993460 result=40 13:44:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:44:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:44:38 Aux= 13:44:38 Message to Camera, serial 66598 queued 13:44:47 Received message from Master: op=Shutter serial=66608 13:44:47 Shutter LASER close 13:44:47 Received message from Master: op=PointingHead serial=66612 13:44:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:44:47 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:44:48 Point started: ret=0 13:44:48 point_skyscan result=0 13:44:48 Check angles 13:44:48 SkyScan query 13:44:49 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.8<-21520 Statuses=0009 0009 13:44:49 Msec=0 True Az=136.215 Ze=-142.8 Az status=0009 Ze status=0009 13:44:49 Check angles 13:44:49 SkyScan query 13:44:50 SkyScan query done: ret=0 az=154.08<-10272 ze=-121.47<-20098 Statuses=0009 0009 13:44:50 Msec=750 True Az=154.08 Ze=-121.47 Az status=0009 Ze status=0009 13:44:50 Check angles 13:44:50 SkyScan query 13:44:50 SkyScan query done: ret=0 az=171.63<-11442 ze=-100.395<-18693 Statuses=0009 0009 13:44:50 Msec=1500 True Az=171.63 Ze=-100.395 Az status=0009 Ze status=0009 13:44:51 Check angles 13:44:51 SkyScan query 13:44:51 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.065<-17271 Statuses=0008 0009 13:44:51 Msec=2250 True Az=176.025 Ze=-79.065 Az status=0008 Ze status=0009 13:44:51 Check angles 13:44:51 SkyScan query 13:44:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.125<-15875 Statuses=0008 0009 13:44:52 Msec=3000 True Az=175.995 Ze=-58.125 Az status=0008 Ze status=0009 13:44:52 Check angles 13:44:52 SkyScan query 13:44:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 13:44:53 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 13:44:53 Message to Master queued w/err=0: serial=66612 error=0 13:44:58 Received message from Master: op=Filter serial=66613 13:44:58 Color wheel filter change from 0 to 0 13:44:58 FLIGetFilterPos err=0 currentPosition=0 13:44:58 FLIGetStepsRemaining err=0 RemainingSteps=0 13:44:58 Filter is already there-color wheel unchanged 13:44:58 Received message from Master: op=Shutter serial=66614 13:44:58 Shutter LASER close 13:44:58 Received message from Camera: op=State serial=66616 13:44:58 GetSingleValue result=40 Value=cccccccc 13:44:58 SkyScan query 13:44:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:44:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:59 Parameters OK 13:44:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:59 Set A/D data flow result=40 13:44:59 Set A/D channel type result=40 13:44:59 Set A/D encoding result=40 13:44:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:59 Set channel filter=0.000000e+000 result=40 13:44:59 Config A/D Result=40 13:44:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:59 Get A/D filter: -9.255963e+061 result=40 13:44:59 Get A/D value=-858993460 result=40 13:44:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:59 Parameters OK 13:44:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:59 Set A/D data flow result=40 13:44:59 Set A/D channel type result=40 13:44:59 Set A/D encoding result=40 13:44:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:59 Set channel filter=0.000000e+000 result=40 13:44:59 Config A/D Result=40 13:44:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:59 Get A/D filter: -9.255963e+061 result=40 13:44:59 Get A/D value=-858993460 result=40 13:44:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:44:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:44:59 Aux= 13:44:59 Message to Camera, serial 66616 queued 13:45:29 Received message from Master: op=Identify serial=66619 13:45:35 Received message from Master: op=PointingHead serial=66632 13:45:35 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:45:35 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:45:36 Point started: ret=0 13:45:36 point_skyscan result=0 13:45:37 Check angles 13:45:37 SkyScan query 13:45:37 SkyScan query done: ret=0 az=153.225<-10215 ze=-21.99<-13466 Statuses=0009 0009 13:45:37 Msec=0 True Az=153.225 Ze=-21.99 Az status=0009 Ze status=0009 13:45:37 Check angles 13:45:37 SkyScan query 13:45:38 SkyScan query done: ret=0 az=135.84<-9056 ze=-1.005<-12067 Statuses=0009 0009 13:45:38 Msec=750 True Az=135.84 Ze=-1.005 Az status=0009 Ze status=0009 13:45:38 Check angles 13:45:38 SkyScan query 13:45:39 SkyScan query done: ret=0 az=118.14<-7876 ze=19.95<-10670 Statuses=0009 0009 13:45:39 Msec=1500 True Az=118.14 Ze=19.95 Az status=0009 Ze status=0009 13:45:39 Check angles 13:45:39 SkyScan query 13:45:39 SkyScan query done: ret=0 az=100.59<-6706 ze=40.98<-9268 Statuses=0009 0009 13:45:39 Msec=2250 True Az=100.59 Ze=40.98 Az status=0009 Ze status=0009 13:45:40 Check angles 13:45:40 SkyScan query 13:45:40 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 13:45:40 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 13:45:40 Check angles 13:45:40 SkyScan query 13:45:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:45:41 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:45:41 Message to Master queued w/err=0: serial=66632 error=0 13:45:46 Received message from Master: op=Filter serial=66633 13:45:46 Color wheel filter change from 0 to 0 13:45:46 FLIGetFilterPos err=0 currentPosition=0 13:45:46 FLIGetStepsRemaining err=0 RemainingSteps=0 13:45:46 Filter is already there-color wheel unchanged [UTC 2018-12-11 13:45:46] 13:45:46 Received message from Master: op=Shutter serial=66634 13:45:46 Shutter LASER close 13:45:46 Received message from Camera: op=State serial=66636 13:45:46 GetSingleValue result=40 Value=cccccccc 13:45:46 SkyScan query 13:45:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:45:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:47 Parameters OK 13:45:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:47 Set A/D data flow result=40 13:45:47 Set A/D channel type result=40 13:45:47 Set A/D encoding result=40 13:45:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:47 Set channel filter=0.000000e+000 result=40 13:45:47 Config A/D Result=40 13:45:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:47 Get A/D filter: -9.255963e+061 result=40 13:45:47 Get A/D value=-858993460 result=40 13:45:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:47 Parameters OK 13:45:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:47 Set A/D data flow result=40 13:45:47 Set A/D channel type result=40 13:45:47 Set A/D encoding result=40 13:45:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:47 Set channel filter=0.000000e+000 result=40 13:45:47 Config A/D Result=40 13:45:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:47 Get A/D filter: -9.255963e+061 result=40 13:45:47 Get A/D value=-858993460 result=40 13:45:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:45:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:45:47 Aux= 13:45:47 Message to Camera, serial 66636 queued 13:46:24 Received message from Master: op=PointingHead serial=66649 13:46:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:46:24 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:46:24 Point started: ret=0 13:46:24 point_skyscan result=0 13:46:25 Check angles 13:46:25 SkyScan query 13:46:25 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 13:46:25 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 13:46:25 Check angles 13:46:25 SkyScan query 13:46:26 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 13:46:26 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 13:46:26 Check angles 13:46:26 SkyScan query 13:46:27 SkyScan query done: ret=0 az=144.15<-9610 ze=38.505<-9433 Statuses=0009 0008 13:46:27 Msec=1500 True Az=144.15 Ze=38.505 Az status=0009 Ze status=0008 13:46:27 Check angles 13:46:27 SkyScan query 13:46:28 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 13:46:28 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 13:46:28 Check angles 13:46:28 SkyScan query 13:46:28 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 13:46:28 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 13:46:28 Check angles 13:46:28 SkyScan query 13:46:29 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:46:29 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:46:29 Message to Master queued w/err=0: serial=66649 error=0 13:46:34 Received message from Master: op=Filter serial=66650 13:46:34 Color wheel filter change from 0 to 0 13:46:34 FLIGetFilterPos err=0 currentPosition=0 13:46:34 FLIGetStepsRemaining err=0 RemainingSteps=0 13:46:34 Filter is already there-color wheel unchanged 13:46:34 Received message from Master: op=Shutter serial=66651 13:46:34 Shutter LASER close 13:46:34 Received message from Camera: op=State serial=66653 13:46:34 GetSingleValue result=40 Value=cccccccc 13:46:34 SkyScan query 13:46:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:46:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:35 Parameters OK 13:46:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:35 Set A/D data flow result=40 13:46:35 Set A/D channel type result=40 13:46:35 Set A/D encoding result=40 13:46:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:35 Set channel filter=0.000000e+000 result=40 13:46:35 Config A/D Result=40 13:46:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:35 Get A/D filter: -9.255963e+061 result=40 13:46:35 Get A/D value=-858993460 result=40 13:46:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:35 Parameters OK 13:46:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:35 Set A/D data flow result=40 13:46:35 Set A/D channel type result=40 13:46:35 Set A/D encoding result=40 13:46:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:35 Set channel filter=0.000000e+000 result=40 13:46:35 Config A/D Result=40 13:46:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:35 Get A/D filter: -9.255963e+061 result=40 13:46:35 Get A/D value=-858993460 result=40 13:46:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:46:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:46:35 Aux= 13:46:35 Message to Camera, serial 66653 queued 13:47:12 Received message from Master: op=PointingHead serial=66666 13:47:12 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:47:12 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:47:12 Point started: ret=0 13:47:12 point_skyscan result=0 13:47:13 Check angles 13:47:13 SkyScan query 13:47:13 SkyScan query done: ret=0 az=153.12<-10208 ze=8.82<-11412 Statuses=0009 0009 13:47:13 Msec=0 True Az=153.12 Ze=8.82 Az status=0009 Ze status=0009 13:47:13 Check angles 13:47:13 SkyScan query 13:47:14 SkyScan query done: ret=0 az=135.75<-9050 ze=-12.15<-12810 Statuses=0009 0009 13:47:14 Msec=750 True Az=135.75 Ze=-12.15 Az status=0009 Ze status=0009 13:47:14 Check angles 13:47:14 SkyScan query 13:47:15 SkyScan query done: ret=0 az=118.095<-7873 ze=-33.09<-14206 Statuses=0009 0009 13:47:15 Msec=1500 True Az=118.095 Ze=-33.09 Az status=0009 Ze status=0009 13:47:15 Check angles 13:47:15 SkyScan query 13:47:16 SkyScan query done: ret=0 az=100.665<-6711 ze=-51.525<-15435 Statuses=0009 0009 13:47:16 Msec=2250 True Az=100.665 Ze=-51.525 Az status=0009 Ze status=0009 13:47:16 Check angles 13:47:16 SkyScan query 13:47:16 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 13:47:16 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 13:47:16 Check angles 13:47:16 SkyScan query 13:47:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:47:17 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:47:17 Message to Master queued w/err=0: serial=66666 error=0 13:47:22 Received message from Master: op=Filter serial=66667 13:47:22 Color wheel filter change from 0 to 0 13:47:22 FLIGetFilterPos err=0 currentPosition=0 13:47:22 FLIGetStepsRemaining err=0 RemainingSteps=0 13:47:22 Filter is already there-color wheel unchanged 13:47:22 Received message from Master: op=Shutter serial=66668 13:47:22 Shutter LASER close 13:47:22 Received message from Camera: op=State serial=66670 13:47:22 GetSingleValue result=40 Value=cccccccc 13:47:22 SkyScan query 13:47:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:47:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:23 Parameters OK 13:47:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:23 Set A/D data flow result=40 13:47:23 Set A/D channel type result=40 13:47:23 Set A/D encoding result=40 13:47:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:23 Set channel filter=0.000000e+000 result=40 13:47:23 Config A/D Result=40 13:47:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:23 Get A/D filter: -9.255963e+061 result=40 13:47:23 Get A/D value=-858993460 result=40 13:47:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:23 Parameters OK 13:47:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:23 Set A/D data flow result=40 13:47:23 Set A/D channel type result=40 13:47:23 Set A/D encoding result=40 13:47:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:23 Set channel filter=0.000000e+000 result=40 13:47:23 Config A/D Result=40 13:47:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:23 Get A/D filter: -9.255963e+061 result=40 13:47:23 Get A/D value=-858993460 result=40 13:47:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:47:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:47:23 Aux= 13:47:23 Message to Camera, serial 66670 queued 13:48:00 Received message from Master: op=PointingHead serial=66683 13:48:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:48:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:48:00 Point started: ret=0 13:48:00 point_skyscan result=0 13:48:01 Check angles 13:48:01 SkyScan query 13:48:01 SkyScan query done: ret=0 az=108.84<-7256 ze=-81.225<-17415 Statuses=0009 0009 13:48:01 Msec=0 True Az=108.84 Ze=-81.225 Az status=0009 Ze status=0009 13:48:02 Check angles 13:48:02 SkyScan query 13:48:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.525<-18835 Statuses=0008 0009 13:48:02 Msec=750 True Az=112.995 Ze=-102.525 Az status=0008 Ze status=0009 13:48:02 Check angles 13:48:02 SkyScan query 13:48:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.495<-20233 Statuses=0008 0009 13:48:03 Msec=1500 True Az=112.995 Ze=-123.495 Az status=0008 Ze status=0009 13:48:03 Check angles 13:48:03 SkyScan query 13:48:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.87<-21658 Statuses=0008 0009 13:48:04 Msec=2250 True Az=112.995 Ze=-144.87 Az status=0008 Ze status=0009 13:48:04 Check angles 13:48:04 SkyScan query 13:48:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.825<-23055 Statuses=0008 0009 13:48:04 Msec=3000 True Az=112.995 Ze=-165.825 Az status=0008 Ze status=0009 13:48:05 Check angles 13:48:05 SkyScan query 13:48:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:48:05 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:48:05 Message to Master queued w/err=0: serial=66683 error=0 13:48:10 Received message from Master: op=Filter serial=66684 13:48:10 Color wheel filter change from 0 to 0 13:48:10 FLIGetFilterPos err=0 currentPosition=0 13:48:10 FLIGetStepsRemaining err=0 RemainingSteps=0 13:48:10 Filter is already there-color wheel unchanged 13:48:10 Received message from Master: op=Shutter serial=66685 13:48:10 Shutter LASER open 13:48:11 Received message from Camera: op=State serial=66687 13:48:11 GetSingleValue result=40 Value=cccccccc 13:48:11 SkyScan query 13:48:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:48:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:11 Parameters OK 13:48:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:11 Set A/D data flow result=40 13:48:11 Set A/D channel type result=40 13:48:11 Set A/D encoding result=40 13:48:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:11 Set channel filter=0.000000e+000 result=40 13:48:11 Config A/D Result=40 13:48:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:11 Get A/D filter: -9.255963e+061 result=40 13:48:11 Get A/D value=-858993460 result=40 13:48:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:11 Parameters OK 13:48:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:11 Set A/D data flow result=40 13:48:11 Set A/D channel type result=40 13:48:11 Set A/D encoding result=40 13:48:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:11 Set channel filter=0.000000e+000 result=40 13:48:11 Config A/D Result=40 13:48:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:11 Get A/D filter: -9.255963e+061 result=40 13:48:11 Get A/D value=-858993460 result=40 13:48:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:48:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:48:11 Aux= 13:48:11 Message to Camera, serial 66687 queued 13:48:20 Received message from Master: op=Shutter serial=66697 13:48:20 Shutter LASER close 13:48:20 Received message from Master: op=PointingHead serial=66701 13:48:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:48:20 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:48:20 Point started: ret=0 13:48:20 point_skyscan result=0 13:48:21 Check angles 13:48:21 SkyScan query 13:48:22 SkyScan query done: ret=0 az=89.88<-5992 ze=157.485<-1501 Statuses=0009 0009 13:48:22 Msec=0 True Az=89.88 Ze=157.485 Az status=0009 Ze status=0009 13:48:22 Check angles 13:48:22 SkyScan query 13:48:22 SkyScan query done: ret=0 az=72.54<-4836 ze=136.5<-2900 Statuses=0009 0009 13:48:22 Msec=750 True Az=72.54 Ze=136.5 Az status=0009 Ze status=0009 13:48:23 Check angles 13:48:23 SkyScan query 13:48:23 SkyScan query done: ret=0 az=55.095<-3673 ze=115.59<-4294 Statuses=0009 0009 13:48:23 Msec=1500 True Az=55.095 Ze=115.59 Az status=0009 Ze status=0009 13:48:23 Check angles 13:48:23 SkyScan query 13:48:24 SkyScan query done: ret=0 az=40.89<-2726 ze=94.155<-5723 Statuses=0009 0009 13:48:24 Msec=2250 True Az=40.89 Ze=94.155 Az status=0009 Ze status=0009 13:48:24 Check angles 13:48:24 SkyScan query 13:48:25 SkyScan query done: ret=0 az=40.995<-2733 ze=73.215<-7119 Statuses=0008 0009 13:48:25 Msec=3000 True Az=40.995 Ze=73.215 Az status=0008 Ze status=0009 13:48:25 Check angles 13:48:25 SkyScan query 13:48:25 SkyScan query done: ret=0 az=40.995<-2733 ze=52.725<-8485 Statuses=0008 0009 13:48:25 Msec=3750 True Az=40.995 Ze=52.725 Az status=0008 Ze status=0009 13:48:26 Check angles 13:48:26 SkyScan query 13:48:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:48:26 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:48:26 Message to Master queued w/err=0: serial=66701 error=0 13:48:31 Received message from Master: op=Filter serial=66702 13:48:31 Color wheel filter change from 0 to 0 13:48:31 FLIGetFilterPos err=0 currentPosition=0 13:48:31 FLIGetStepsRemaining err=0 RemainingSteps=0 13:48:31 Filter is already there-color wheel unchanged 13:48:31 Received message from Master: op=Shutter serial=66703 13:48:31 Shutter LASER close 13:48:31 Received message from Camera: op=State serial=66705 13:48:31 GetSingleValue result=40 Value=cccccccc 13:48:31 SkyScan query 13:48:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:48:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:32 Parameters OK 13:48:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:32 Set A/D data flow result=40 13:48:32 Set A/D channel type result=40 13:48:32 Set A/D encoding result=40 13:48:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:32 Set channel filter=0.000000e+000 result=40 13:48:32 Config A/D Result=40 13:48:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:32 Get A/D filter: -9.255963e+061 result=40 13:48:32 Get A/D value=-858993460 result=40 13:48:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:32 Parameters OK 13:48:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:32 Set A/D data flow result=40 13:48:32 Set A/D channel type result=40 13:48:32 Set A/D encoding result=40 13:48:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:32 Set channel filter=0.000000e+000 result=40 13:48:32 Config A/D Result=40 13:48:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:32 Get A/D filter: -9.255963e+061 result=40 13:48:32 Get A/D value=-858993460 result=40 13:48:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:48:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:48:32 Aux= 13:48:32 Message to Camera, serial 66705 queued 13:49:09 Received message from Master: op=PointingHead serial=66718 13:49:09 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:49:09 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:49:09 Point started: ret=0 13:49:09 point_skyscan result=0 13:49:10 Check angles 13:49:10 SkyScan query 13:49:11 SkyScan query done: ret=0 az=64.425<-4295 ze=66.54<-7564 Statuses=0009 0008 13:49:11 Msec=0 True Az=64.425 Ze=66.54 Az status=0009 Ze status=0008 13:49:11 Check angles 13:49:11 SkyScan query 13:49:11 SkyScan query done: ret=0 az=81.705<-5447 ze=66.495<-7567 Statuses=0009 0008 13:49:11 Msec=750 True Az=81.705 Ze=66.495 Az status=0009 Ze status=0008 13:49:12 Check angles 13:49:12 SkyScan query 13:49:12 SkyScan query done: ret=0 az=99.675<-6645 ze=66.495<-7567 Statuses=0009 0008 13:49:12 Msec=1500 True Az=99.675 Ze=66.495 Az status=0009 Ze status=0008 13:49:12 Check angles 13:49:12 SkyScan query 13:49:13 SkyScan query done: ret=0 az=117.225<-7815 ze=66.495<-7567 Statuses=0009 0008 13:49:13 Msec=2250 True Az=117.225 Ze=66.495 Az status=0009 Ze status=0008 13:49:13 Check angles 13:49:13 SkyScan query 13:49:14 SkyScan query done: ret=0 az=134.61<-8974 ze=66.495<-7567 Statuses=0009 0008 13:49:14 Msec=3000 True Az=134.61 Ze=66.495 Az status=0009 Ze status=0008 13:49:14 Check angles 13:49:14 SkyScan query 13:49:14 SkyScan query done: ret=0 az=152.13<-10142 ze=66.495<-7567 Statuses=0009 0008 13:49:14 Msec=3750 True Az=152.13 Ze=66.495 Az status=0009 Ze status=0008 13:49:15 Check angles 13:49:15 SkyScan query 13:49:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:49:15 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 13:49:15 Message to Master queued w/err=0: serial=66718 error=0 13:49:20 Received message from Master: op=Filter serial=66719 13:49:20 Color wheel filter change from 0 to 0 13:49:20 FLIGetFilterPos err=0 currentPosition=0 13:49:20 FLIGetStepsRemaining err=0 RemainingSteps=0 13:49:20 Filter is already there-color wheel unchanged 13:49:20 Received message from Master: op=Shutter serial=66720 13:49:20 Shutter LASER close 13:49:20 Received message from Camera: op=State serial=66722 13:49:20 GetSingleValue result=40 Value=cccccccc 13:49:20 SkyScan query 13:49:21 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:49:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:21 Parameters OK 13:49:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:21 Set A/D data flow result=40 13:49:21 Set A/D channel type result=40 13:49:21 Set A/D encoding result=40 13:49:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:21 Set channel filter=0.000000e+000 result=40 13:49:21 Config A/D Result=40 13:49:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:21 Get A/D filter: -9.255963e+061 result=40 13:49:21 Get A/D value=-858993460 result=40 13:49:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:21 Parameters OK 13:49:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:21 Set A/D data flow result=40 13:49:21 Set A/D channel type result=40 13:49:21 Set A/D encoding result=40 13:49:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:21 Set channel filter=0.000000e+000 result=40 13:49:21 Config A/D Result=40 13:49:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:21 Get A/D filter: -9.255963e+061 result=40 13:49:21 Get A/D value=-858993460 result=40 13:49:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:21 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:49:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:49:21 Aux= 13:49:21 Message to Camera, serial 66722 queued 13:49:58 Received message from Master: op=PointingHead serial=66735 13:49:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:49:58 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:49:58 Point started: ret=0 13:49:58 point_skyscan result=0 13:49:59 Check angles 13:49:59 SkyScan query 13:49:59 SkyScan query done: ret=0 az=135.24<-9016 ze=36.885<-9541 Statuses=0009 0009 13:49:59 Msec=0 True Az=135.24 Ze=36.885 Az status=0009 Ze status=0009 13:50:00 Check angles 13:50:00 SkyScan query 13:50:00 SkyScan query done: ret=0 az=117.675<-7845 ze=16.005<-10933 Statuses=0009 0009 13:50:00 Msec=750 True Az=117.675 Ze=16.005 Az status=0009 Ze status=0009 13:50:00 Check angles 13:50:00 SkyScan query 13:50:01 SkyScan query done: ret=0 az=100.32<-6688 ze=-4.965<-12331 Statuses=0009 0009 13:50:01 Msec=1500 True Az=100.32 Ze=-4.965 Az status=0009 Ze status=0009 13:50:01 Check angles 13:50:01 SkyScan query 13:50:02 SkyScan query done: ret=0 az=82.815<-5521 ze=-25.905<-13727 Statuses=0009 0009 13:50:02 Msec=2250 True Az=82.815 Ze=-25.905 Az status=0009 Ze status=0009 13:50:02 Check angles 13:50:02 SkyScan query 13:50:02 SkyScan query done: ret=0 az=64.95<-4330 ze=-38.58<-14572 Statuses=0009 0008 13:50:02 Msec=3000 True Az=64.95 Ze=-38.58 Az status=0009 Ze status=0008 13:50:03 Check angles 13:50:03 SkyScan query 13:50:03 SkyScan query done: ret=0 az=47.535<-3169 ze=-38.52<-14568 Statuses=0009 0008 13:50:03 Msec=3750 True Az=47.535 Ze=-38.52 Az status=0009 Ze status=0008 13:50:03 Check angles 13:50:03 SkyScan query 13:50:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:50:04 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:50:04 Message to Master queued w/err=0: serial=66735 error=0 13:50:09 Received message from Master: op=Filter serial=66736 13:50:09 Color wheel filter change from 0 to 0 13:50:09 FLIGetFilterPos err=0 currentPosition=0 13:50:09 FLIGetStepsRemaining err=0 RemainingSteps=0 13:50:09 Filter is already there-color wheel unchanged 13:50:09 Received message from Master: op=Shutter serial=66737 13:50:09 Shutter LASER close 13:50:09 Received message from Camera: op=State serial=66739 13:50:09 GetSingleValue result=40 Value=cccccccc 13:50:09 SkyScan query 13:50:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:50:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:10 Parameters OK 13:50:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:10 Set A/D data flow result=40 13:50:10 Set A/D channel type result=40 13:50:10 Set A/D encoding result=40 13:50:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:10 Set channel filter=0.000000e+000 result=40 13:50:10 Config A/D Result=40 13:50:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:10 Get A/D filter: -9.255963e+061 result=40 13:50:10 Get A/D value=-858993460 result=40 13:50:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:10 Parameters OK 13:50:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:10 Set A/D data flow result=40 13:50:10 Set A/D channel type result=40 13:50:10 Set A/D encoding result=40 13:50:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:10 Set channel filter=0.000000e+000 result=40 13:50:10 Config A/D Result=40 13:50:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:10 Get A/D filter: -9.255963e+061 result=40 13:50:10 Get A/D value=-858993460 result=40 13:50:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:50:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:50:10 Aux= 13:50:10 Message to Camera, serial 66739 queued 13:50:47 Received message from Master: op=PointingHead serial=66752 13:50:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:50:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:50:47 Point started: ret=0 13:50:47 point_skyscan result=0 13:50:48 Check angles 13:50:48 SkyScan query 13:50:48 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.16<-16544 Statuses=0009 0009 13:50:48 Msec=0 True Az=64.005 Ze=-68.16 Az status=0009 Ze status=0009 13:50:48 Check angles 13:50:48 SkyScan query 13:50:49 SkyScan query done: ret=0 az=81.765<-5451 ze=-89.625<-17975 Statuses=0009 0009 13:50:49 Msec=750 True Az=81.765 Ze=-89.625 Az status=0009 Ze status=0009 13:50:49 Check angles 13:50:49 SkyScan query 13:50:50 SkyScan query done: ret=0 az=99.345<-6623 ze=-110.61<-19374 Statuses=0009 0009 13:50:50 Msec=1500 True Az=99.345 Ze=-110.61 Az status=0009 Ze status=0009 13:50:50 Check angles 13:50:50 SkyScan query 13:50:50 SkyScan query done: ret=0 az=116.88<-7792 ze=-131.505<-20767 Statuses=0009 0009 13:50:50 Msec=2250 True Az=116.88 Ze=-131.505 Az status=0009 Ze status=0009 13:50:51 Check angles 13:50:51 SkyScan query 13:50:51 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 13:50:51 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 13:50:51 Check angles 13:50:51 SkyScan query 13:50:52 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:50:52 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:50:52 Message to Master queued w/err=0: serial=66752 error=0 13:50:57 Received message from Master: op=Filter serial=66753 13:50:57 Color wheel filter change from 0 to 0 13:50:57 FLIGetFilterPos err=0 currentPosition=0 13:50:57 FLIGetStepsRemaining err=0 RemainingSteps=0 13:50:57 Filter is already there-color wheel unchanged 13:50:57 Received message from Master: op=Shutter serial=66754 13:50:57 Shutter LASER close 13:50:57 Received message from Camera: op=State serial=66756 13:50:57 GetSingleValue result=40 Value=cccccccc 13:50:57 SkyScan query 13:50:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:50:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:58 Parameters OK 13:50:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:58 Set A/D data flow result=40 13:50:58 Set A/D channel type result=40 13:50:58 Set A/D encoding result=40 13:50:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:58 Set channel filter=0.000000e+000 result=40 13:50:58 Config A/D Result=40 13:50:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:58 Get A/D filter: -9.255963e+061 result=40 13:50:58 Get A/D value=-858993460 result=40 13:50:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:58 Parameters OK 13:50:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:58 Set A/D data flow result=40 13:50:58 Set A/D channel type result=40 13:50:58 Set A/D encoding result=40 13:50:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:58 Set channel filter=0.000000e+000 result=40 13:50:58 Config A/D Result=40 13:50:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:58 Get A/D filter: -9.255963e+061 result=40 13:50:58 Get A/D value=-858993460 result=40 13:50:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:58 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:50:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:50:58 Aux= 13:50:58 Message to Camera, serial 66756 queued 13:51:34 Received message from Master: op=PointingHead serial=66768 13:51:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:51:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:51:34 Point started: ret=0 13:51:34 point_skyscan result=0 13:51:35 Check angles 13:51:35 SkyScan query 13:51:35 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.24<-23416 Statuses=0009 0009 13:51:35 Msec=0 True Az=113.01 Ze=-171.24 Az status=0009 Ze status=0009 13:51:36 Check angles 13:51:36 SkyScan query 13:51:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:51:36 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:51:36 Message to Master queued w/err=0: serial=66768 error=0 13:51:41 Received message from Master: op=Filter serial=66769 13:51:41 Color wheel filter change from 0 to 0 13:51:41 FLIGetFilterPos err=0 currentPosition=0 13:51:41 FLIGetStepsRemaining err=0 RemainingSteps=0 13:51:41 Filter is already there-color wheel unchanged 13:51:41 Received message from Master: op=Shutter serial=66770 13:51:41 Shutter LASER open 13:51:41 Received message from Camera: op=State serial=66772 13:51:41 GetSingleValue result=40 Value=cccccccc 13:51:41 SkyScan query 13:51:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:51:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:42 Parameters OK 13:51:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:42 Set A/D data flow result=40 13:51:42 Set A/D channel type result=40 13:51:42 Set A/D encoding result=40 13:51:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:42 Set channel filter=0.000000e+000 result=40 13:51:42 Config A/D Result=40 13:51:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:42 Get A/D filter: -9.255963e+061 result=40 13:51:42 Get A/D value=-858993460 result=40 13:51:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:42 Parameters OK 13:51:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:42 Set A/D data flow result=40 13:51:42 Set A/D channel type result=40 13:51:42 Set A/D encoding result=40 13:51:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:42 Set channel filter=0.000000e+000 result=40 13:51:42 Config A/D Result=40 13:51:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:42 Get A/D filter: -9.255963e+061 result=40 13:51:42 Get A/D value=-858993460 result=40 13:51:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:51:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:51:42 Aux= 13:51:42 Message to Camera, serial 66772 queued 13:51:50 Received message from Master: op=Shutter serial=66782 13:51:51 Shutter LASER close 13:51:51 Received message from Master: op=PointingHead serial=66786 13:51:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:51:51 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:51:51 Point started: ret=0 13:51:51 point_skyscan result=0 13:51:52 Check angles 13:51:52 SkyScan query 13:51:53 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.46<-21564 Statuses=0009 0009 13:51:53 Msec=0 True Az=135.765 Ze=-143.46 Az status=0009 Ze status=0009 13:51:53 Check angles 13:51:53 SkyScan query 13:51:54 SkyScan query done: ret=0 az=153.225<-10215 ze=-122.505<-20167 Statuses=0009 0009 13:51:54 Msec=750 True Az=153.225 Ze=-122.505 Az status=0009 Ze status=0009 13:51:54 Check angles 13:51:54 SkyScan query 13:51:54 SkyScan query done: ret=0 az=170.73<-11382 ze=-101.595<-18773 Statuses=0009 0009 13:51:54 Msec=1500 True Az=170.73 Ze=-101.595 Az status=0009 Ze status=0009 13:51:54 Check angles 13:51:54 SkyScan query 13:51:55 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.55<-17370 Statuses=0008 0009 13:51:55 Msec=2250 True Az=176.025 Ze=-80.55 Az status=0008 Ze status=0009 13:51:55 Check angles 13:51:55 SkyScan query 13:51:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.655<-15977 Statuses=0008 0009 13:51:56 Msec=3000 True Az=176.01 Ze=-59.655 Az status=0008 Ze status=0009 13:51:56 Check angles 13:51:56 SkyScan query 13:51:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:51:57 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:51:57 Message to Master queued w/err=0: serial=66786 error=0 13:52:02 Received message from Master: op=Filter serial=66787 13:52:02 Color wheel filter change from 0 to 0 13:52:02 FLIGetFilterPos err=0 currentPosition=0 13:52:02 FLIGetStepsRemaining err=0 RemainingSteps=0 13:52:02 Filter is already there-color wheel unchanged 13:52:02 Received message from Master: op=Shutter serial=66788 13:52:02 Shutter LASER close 13:52:02 Received message from Camera: op=State serial=66790 13:52:02 GetSingleValue result=40 Value=cccccccc 13:52:02 SkyScan query 13:52:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:52:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:02 Parameters OK 13:52:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:02 Set A/D data flow result=40 13:52:02 Set A/D channel type result=40 13:52:02 Set A/D encoding result=40 13:52:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:02 Set channel filter=0.000000e+000 result=40 13:52:02 Config A/D Result=40 13:52:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:02 Get A/D filter: -9.255963e+061 result=40 13:52:02 Get A/D value=-858993460 result=40 13:52:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:02 Parameters OK 13:52:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:02 Set A/D data flow result=40 13:52:02 Set A/D channel type result=40 13:52:02 Set A/D encoding result=40 13:52:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:02 Set channel filter=0.000000e+000 result=40 13:52:02 Config A/D Result=40 13:52:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:02 Get A/D filter: -9.255963e+061 result=40 13:52:02 Get A/D value=-858993460 result=40 13:52:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:52:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:52:02 Aux= 13:52:02 Message to Camera, serial 66790 queued 13:52:39 Received message from Master: op=PointingHead serial=66803 13:52:39 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:52:39 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:52:40 Point started: ret=0 13:52:40 point_skyscan result=0 13:52:40 Check angles 13:52:40 SkyScan query 13:52:41 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.84<-13456 Statuses=0009 0009 13:52:41 Msec=0 True Az=152.985 Ze=-21.84 Az status=0009 Ze status=0009 13:52:41 Check angles 13:52:41 SkyScan query 13:52:42 SkyScan query done: ret=0 az=135.255<-9017 ze=-0.405<-12027 Statuses=0009 0009 13:52:42 Msec=750 True Az=135.255 Ze=-0.405 Az status=0009 Ze status=0009 13:52:42 Check angles 13:52:42 SkyScan query 13:52:42 SkyScan query done: ret=0 az=117.33<-7822 ze=20.985<-10601 Statuses=0009 0009 13:52:42 Msec=1500 True Az=117.33 Ze=20.985 Az status=0009 Ze status=0009 13:52:43 Check angles 13:52:43 SkyScan query 13:52:43 SkyScan query done: ret=0 az=99.96<-6664 ze=41.91<-9206 Statuses=0009 0009 13:52:43 Msec=2250 True Az=99.96 Ze=41.91 Az status=0009 Ze status=0009 13:52:43 Check angles 13:52:43 SkyScan query 13:52:44 SkyScan query done: ret=0 az=86.04<-5736 ze=51.555<-8563 Statuses=0009 0008 13:52:44 Msec=3000 True Az=86.04 Ze=51.555 Az status=0009 Ze status=0008 13:52:44 Check angles 13:52:44 SkyScan query 13:52:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:52:45 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:52:45 Message to Master queued w/err=0: serial=66803 error=0 13:52:50 Received message from Master: op=Filter serial=66804 13:52:50 Color wheel filter change from 0 to 0 13:52:50 FLIGetFilterPos err=0 currentPosition=0 13:52:50 FLIGetStepsRemaining err=0 RemainingSteps=0 13:52:50 Filter is already there-color wheel unchanged 13:52:50 Received message from Master: op=Shutter serial=66805 13:52:50 Shutter LASER close 13:52:50 Received message from Camera: op=State serial=66807 13:52:50 GetSingleValue result=40 Value=cccccccc 13:52:50 SkyScan query 13:52:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:52:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:51 Parameters OK 13:52:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:51 Set A/D data flow result=40 13:52:51 Set A/D channel type result=40 13:52:51 Set A/D encoding result=40 13:52:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:51 Set channel filter=0.000000e+000 result=40 13:52:51 Config A/D Result=40 13:52:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:51 Get A/D filter: -9.255963e+061 result=40 13:52:51 Get A/D value=-858993460 result=40 13:52:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:51 Parameters OK 13:52:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:51 Set A/D data flow result=40 13:52:51 Set A/D channel type result=40 13:52:51 Set A/D encoding result=40 13:52:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:51 Set channel filter=0.000000e+000 result=40 13:52:51 Config A/D Result=40 13:52:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:51 Get A/D filter: -9.255963e+061 result=40 13:52:51 Get A/D value=-858993460 result=40 13:52:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:52:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:52:51 Aux= 13:52:51 Message to Camera, serial 66807 queued 13:53:27 Received message from Master: op=PointingHead serial=66820 13:53:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:53:27 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:53:28 Point started: ret=0 13:53:28 point_skyscan result=0 13:53:28 Check angles 13:53:28 SkyScan query 13:53:29 SkyScan query done: ret=0 az=108.84<-7256 ze=38.49<-9434 Statuses=0009 0008 13:53:29 Msec=0 True Az=108.84 Ze=38.49 Az status=0009 Ze status=0008 13:53:29 Check angles 13:53:29 SkyScan query 13:53:30 SkyScan query done: ret=0 az=126.48<-8432 ze=38.505<-9433 Statuses=0009 0008 13:53:30 Msec=750 True Az=126.48 Ze=38.505 Az status=0009 Ze status=0008 13:53:30 Check angles 13:53:30 SkyScan query 13:53:31 SkyScan query done: ret=0 az=143.835<-9589 ze=38.505<-9433 Statuses=0009 0008 13:53:31 Msec=1500 True Az=143.835 Ze=38.505 Az status=0009 Ze status=0008 13:53:31 Check angles 13:53:31 SkyScan query 13:53:31 SkyScan query done: ret=0 az=161.19<-10746 ze=38.505<-9433 Statuses=0009 0008 13:53:31 Msec=2250 True Az=161.19 Ze=38.505 Az status=0009 Ze status=0008 13:53:31 Check angles 13:53:31 SkyScan query 13:53:32 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 13:53:32 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 13:53:32 Check angles 13:53:32 SkyScan query 13:53:33 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:53:33 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:53:33 Message to Master queued w/err=0: serial=66820 error=0 13:53:38 Received message from Master: op=Filter serial=66821 13:53:38 Color wheel filter change from 0 to 0 13:53:38 FLIGetFilterPos err=0 currentPosition=0 13:53:38 FLIGetStepsRemaining err=0 RemainingSteps=0 13:53:38 Filter is already there-color wheel unchanged 13:53:38 Received message from Master: op=Shutter serial=66822 13:53:38 Shutter LASER close 13:53:38 Received message from Camera: op=State serial=66824 13:53:38 GetSingleValue result=40 Value=cccccccc 13:53:38 SkyScan query 13:53:39 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:53:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:39 Parameters OK 13:53:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:39 Set A/D data flow result=40 13:53:39 Set A/D channel type result=40 13:53:39 Set A/D encoding result=40 13:53:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:39 Set channel filter=0.000000e+000 result=40 13:53:39 Config A/D Result=40 13:53:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:39 Get A/D filter: -9.255963e+061 result=40 13:53:39 Get A/D value=-858993460 result=40 13:53:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:39 Parameters OK 13:53:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:39 Set A/D data flow result=40 13:53:39 Set A/D channel type result=40 13:53:39 Set A/D encoding result=40 13:53:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:39 Set channel filter=0.000000e+000 result=40 13:53:39 Config A/D Result=40 13:53:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:39 Get A/D filter: -9.255963e+061 result=40 13:53:39 Get A/D value=-858993460 result=40 13:53:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:53:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:53:39 Aux= 13:53:39 Message to Camera, serial 66824 queued 13:54:15 Received message from Master: op=PointingHead serial=66837 13:54:15 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:54:15 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:54:16 Point started: ret=0 13:54:16 point_skyscan result=0 13:54:17 Check angles 13:54:17 SkyScan query 13:54:17 SkyScan query done: ret=0 az=153.18<-10212 ze=8.94<-11404 Statuses=0009 0009 13:54:17 Msec=0 True Az=153.18 Ze=8.94 Az status=0009 Ze status=0009 13:54:17 Check angles 13:54:17 SkyScan query 13:54:18 SkyScan query done: ret=0 az=135.78<-9052 ze=-12.03<-12802 Statuses=0009 0009 13:54:18 Msec=750 True Az=135.78 Ze=-12.03 Az status=0009 Ze status=0009 13:54:18 Check angles 13:54:18 SkyScan query 13:54:19 SkyScan query done: ret=0 az=118.155<-7877 ze=-32.955<-14197 Statuses=0009 0009 13:54:19 Msec=1500 True Az=118.155 Ze=-32.955 Az status=0009 Ze status=0009 13:54:19 Check angles 13:54:19 SkyScan query 13:54:19 SkyScan query done: ret=0 az=100.35<-6690 ze=-51.54<-15436 Statuses=0009 0009 13:54:19 Msec=2250 True Az=100.35 Ze=-51.54 Az status=0009 Ze status=0009 13:54:20 Check angles 13:54:20 SkyScan query 13:54:20 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 13:54:20 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 13:54:20 Check angles 13:54:20 SkyScan query 13:54:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:54:21 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:54:21 Message to Master queued w/err=0: serial=66837 error=0 13:54:26 Received message from Master: op=Filter serial=66838 13:54:26 Color wheel filter change from 0 to 0 13:54:26 FLIGetFilterPos err=0 currentPosition=0 13:54:26 FLIGetStepsRemaining err=0 RemainingSteps=0 13:54:26 Filter is already there-color wheel unchanged 13:54:26 Received message from Master: op=Shutter serial=66839 13:54:26 Shutter LASER close 13:54:26 Received message from Camera: op=State serial=66841 13:54:26 GetSingleValue result=40 Value=cccccccc 13:54:26 SkyScan query 13:54:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:54:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:27 Parameters OK 13:54:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:27 Set A/D data flow result=40 13:54:27 Set A/D channel type result=40 13:54:27 Set A/D encoding result=40 13:54:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:27 Set channel filter=0.000000e+000 result=40 13:54:27 Config A/D Result=40 13:54:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:27 Get A/D filter: -9.255963e+061 result=40 13:54:27 Get A/D value=-858993460 result=40 13:54:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:27 Parameters OK 13:54:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:27 Set A/D data flow result=40 13:54:27 Set A/D channel type result=40 13:54:27 Set A/D encoding result=40 13:54:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:27 Set channel filter=0.000000e+000 result=40 13:54:27 Config A/D Result=40 13:54:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:27 Get A/D filter: -9.255963e+061 result=40 13:54:27 Get A/D value=-858993460 result=40 13:54:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:54:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:54:27 Aux= 13:54:27 Message to Camera, serial 66841 queued 13:55:03 Received message from Master: op=PointingHead serial=66854 13:55:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:55:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:55:04 Point started: ret=0 13:55:04 point_skyscan result=0 13:55:05 Check angles 13:55:05 SkyScan query 13:55:05 SkyScan query done: ret=0 az=109.035<-7269 ze=-81.345<-17423 Statuses=0009 0009 13:55:05 Msec=0 True Az=109.035 Ze=-81.345 Az status=0009 Ze status=0009 13:55:05 Check angles 13:55:05 SkyScan query 13:55:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.75<-18850 Statuses=0008 0009 13:55:06 Msec=750 True Az=112.995 Ze=-102.75 Az status=0008 Ze status=0009 13:55:06 Check angles 13:55:06 SkyScan query 13:55:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.675<-20245 Statuses=0008 0009 13:55:07 Msec=1500 True Az=112.995 Ze=-123.675 Az status=0008 Ze status=0009 13:55:07 Check angles 13:55:07 SkyScan query 13:55:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.645<-21643 Statuses=0008 0009 13:55:07 Msec=2250 True Az=112.995 Ze=-144.645 Az status=0008 Ze status=0009 13:55:08 Check angles 13:55:08 SkyScan query 13:55:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.57<-23038 Statuses=0008 0009 13:55:08 Msec=3000 True Az=112.995 Ze=-165.57 Az status=0008 Ze status=0009 13:55:08 Check angles 13:55:08 SkyScan query 13:55:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:55:09 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:55:09 Message to Master queued w/err=0: serial=66854 error=0 13:55:14 Received message from Master: op=Filter serial=66855 13:55:14 Color wheel filter change from 0 to 0 13:55:14 FLIGetFilterPos err=0 currentPosition=0 13:55:14 FLIGetStepsRemaining err=0 RemainingSteps=0 13:55:14 Filter is already there-color wheel unchanged 13:55:14 Received message from Master: op=Shutter serial=66856 13:55:14 Shutter LASER open 13:55:14 Received message from Camera: op=State serial=66858 13:55:14 GetSingleValue result=40 Value=cccccccc 13:55:14 SkyScan query 13:55:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:55:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:15 Parameters OK 13:55:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:15 Set A/D data flow result=40 13:55:15 Set A/D channel type result=40 13:55:15 Set A/D encoding result=40 13:55:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:15 Set channel filter=0.000000e+000 result=40 13:55:15 Config A/D Result=40 13:55:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:15 Get A/D filter: -9.255963e+061 result=40 13:55:15 Get A/D value=-858993460 result=40 13:55:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:15 Parameters OK 13:55:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:15 Set A/D data flow result=40 13:55:15 Set A/D channel type result=40 13:55:15 Set A/D encoding result=40 13:55:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:15 Set channel filter=0.000000e+000 result=40 13:55:15 Config A/D Result=40 13:55:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:15 Get A/D filter: -9.255963e+061 result=40 13:55:15 Get A/D value=-858993460 result=40 13:55:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:55:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:55:15 Aux= 13:55:15 Message to Camera, serial 66858 queued 13:55:23 Received message from Master: op=Shutter serial=66868 13:55:23 Shutter LASER close 13:55:24 Received message from Master: op=PointingHead serial=66872 13:55:24 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:55:24 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:55:24 Point started: ret=0 13:55:24 point_skyscan result=0 13:55:25 Check angles 13:55:25 SkyScan query 13:55:26 SkyScan query done: ret=0 az=89.85<-5990 ze=157.26<-1516 Statuses=0009 0009 13:55:26 Msec=0 True Az=89.85 Ze=157.26 Az status=0009 Ze status=0009 13:55:26 Check angles 13:55:26 SkyScan query 13:55:26 SkyScan query done: ret=0 az=72.45<-4830 ze=136.275<-2915 Statuses=0009 0009 13:55:26 Msec=750 True Az=72.45 Ze=136.275 Az status=0009 Ze status=0009 13:55:26 Check angles 13:55:26 SkyScan query 13:55:27 SkyScan query done: ret=0 az=54.975<-3665 ze=115.365<-4309 Statuses=0009 0009 13:55:27 Msec=1500 True Az=54.975 Ze=115.365 Az status=0009 Ze status=0009 13:55:27 Check angles 13:55:27 SkyScan query 13:55:28 SkyScan query done: ret=0 az=40.86<-2724 ze=94.365<-5709 Statuses=0009 0009 13:55:28 Msec=2250 True Az=40.86 Ze=94.365 Az status=0009 Ze status=0009 13:55:28 Check angles 13:55:28 SkyScan query 13:55:29 SkyScan query done: ret=0 az=40.995<-2733 ze=73.425<-7105 Statuses=0008 0009 13:55:29 Msec=3000 True Az=40.995 Ze=73.425 Az status=0008 Ze status=0009 13:55:29 Check angles 13:55:29 SkyScan query 13:55:29 SkyScan query done: ret=0 az=40.995<-2733 ze=52.845<-8477 Statuses=0008 0009 13:55:29 Msec=3750 True Az=40.995 Ze=52.845 Az status=0008 Ze status=0009 13:55:29 Check angles 13:55:29 SkyScan query 13:55:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:55:30 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:55:30 Message to Master queued w/err=0: serial=66872 error=0 13:55:35 Received message from Master: op=Filter serial=66873 13:55:35 Color wheel filter change from 0 to 0 13:55:35 FLIGetFilterPos err=0 currentPosition=0 13:55:35 FLIGetStepsRemaining err=0 RemainingSteps=0 [UTC 2018-12-11 13:55:35] 13:55:35 Filter is already there-color wheel unchanged 13:55:35 Received message from Master: op=Shutter serial=66874 13:55:35 Shutter LASER close 13:55:35 Received message from Camera: op=State serial=66876 13:55:35 GetSingleValue result=40 Value=cccccccc 13:55:35 SkyScan query 13:55:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:55:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:36 Parameters OK 13:55:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:36 Set A/D data flow result=40 13:55:36 Set A/D channel type result=40 13:55:36 Set A/D encoding result=40 13:55:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:36 Set channel filter=0.000000e+000 result=40 13:55:36 Config A/D Result=40 13:55:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:36 Get A/D filter: -9.255963e+061 result=40 13:55:36 Get A/D value=-858993460 result=40 13:55:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:36 Parameters OK 13:55:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:36 Set A/D data flow result=40 13:55:36 Set A/D channel type result=40 13:55:36 Set A/D encoding result=40 13:55:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:36 Set channel filter=0.000000e+000 result=40 13:55:36 Config A/D Result=40 13:55:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:36 Get A/D filter: -9.255963e+061 result=40 13:55:36 Get A/D value=-858993460 result=40 13:55:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:55:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:55:36 Aux= 13:55:36 Message to Camera, serial 66876 queued [UTC 2018-12-11 13:55:54] 13:56:13 Received message from Master: op=PointingHead serial=66889 13:56:13 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:56:13 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:56:13 Point started: ret=0 13:56:13 point_skyscan result=0 13:56:14 Check angles 13:56:14 SkyScan query 13:56:15 SkyScan query done: ret=0 az=63.945<-4263 ze=66.54<-7564 Statuses=0009 0008 13:56:15 Msec=0 True Az=63.945 Ze=66.54 Az status=0009 Ze status=0008 13:56:15 Check angles 13:56:15 SkyScan query 13:56:15 SkyScan query done: ret=0 az=81.285<-5419 ze=66.51<-7566 Statuses=0009 0008 13:56:15 Msec=750 True Az=81.285 Ze=66.51 Az status=0009 Ze status=0008 13:56:15 Check angles 13:56:15 SkyScan query 13:56:16 SkyScan query done: ret=0 az=98.85<-6590 ze=66.495<-7567 Statuses=0009 0008 13:56:16 Msec=1500 True Az=98.85 Ze=66.495 Az status=0009 Ze status=0008 13:56:16 Check angles 13:56:16 SkyScan query 13:56:17 SkyScan query done: ret=0 az=116.385<-7759 ze=66.495<-7567 Statuses=0009 0008 13:56:17 Msec=2250 True Az=116.385 Ze=66.495 Az status=0009 Ze status=0008 13:56:17 Check angles 13:56:17 SkyScan query 13:56:18 SkyScan query done: ret=0 az=134.01<-8934 ze=66.495<-7567 Statuses=0009 0008 13:56:18 Msec=3000 True Az=134.01 Ze=66.495 Az status=0009 Ze status=0008 13:56:18 Check angles 13:56:18 SkyScan query 13:56:18 SkyScan query done: ret=0 az=151.335<-10089 ze=66.495<-7567 Statuses=0009 0008 13:56:18 Msec=3750 True Az=151.335 Ze=66.495 Az status=0009 Ze status=0008 13:56:18 Check angles 13:56:18 SkyScan query 13:56:19 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:56:19 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 13:56:19 Message to Master queued w/err=0: serial=66889 error=0 13:56:24 Received message from Master: op=Filter serial=66890 13:56:24 Color wheel filter change from 0 to 0 13:56:24 FLIGetFilterPos err=0 currentPosition=0 13:56:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:56:24 Filter is already there-color wheel unchanged 13:56:24 Received message from Master: op=Shutter serial=66891 13:56:24 Shutter LASER close 13:56:24 Received message from Camera: op=State serial=66893 13:56:24 GetSingleValue result=40 Value=cccccccc 13:56:24 SkyScan query 13:56:25 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:56:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:25 Parameters OK 13:56:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:25 Set A/D data flow result=40 13:56:25 Set A/D channel type result=40 13:56:25 Set A/D encoding result=40 13:56:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:25 Set channel filter=0.000000e+000 result=40 13:56:25 Config A/D Result=40 13:56:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:25 Get A/D filter: -9.255963e+061 result=40 13:56:25 Get A/D value=-858993460 result=40 13:56:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:25 Parameters OK 13:56:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:25 Set A/D data flow result=40 13:56:25 Set A/D channel type result=40 13:56:25 Set A/D encoding result=40 13:56:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:25 Set channel filter=0.000000e+000 result=40 13:56:25 Config A/D Result=40 13:56:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:25 Get A/D filter: -9.255963e+061 result=40 13:56:25 Get A/D value=-858993460 result=40 13:56:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:25 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:56:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:56:25 Aux= 13:56:25 Message to Camera, serial 66893 queued 13:57:02 Received message from Master: op=PointingHead serial=66906 13:57:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:57:02 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:57:02 Point started: ret=0 13:57:02 point_skyscan result=0 13:57:03 Check angles 13:57:03 SkyScan query 13:57:03 SkyScan query done: ret=0 az=134.79<-8986 ze=36.585<-9561 Statuses=0009 0009 13:57:03 Msec=0 True Az=134.79 Ze=36.585 Az status=0009 Ze status=0009 13:57:04 Check angles 13:57:04 SkyScan query 13:57:04 SkyScan query done: ret=0 az=117.375<-7825 ze=15.675<-10955 Statuses=0009 0009 13:57:04 Msec=750 True Az=117.375 Ze=15.675 Az status=0009 Ze status=0009 13:57:04 Check angles 13:57:04 SkyScan query 13:57:05 SkyScan query done: ret=0 az=99.975<-6665 ze=-5.325<-12355 Statuses=0009 0009 13:57:05 Msec=1500 True Az=99.975 Ze=-5.325 Az status=0009 Ze status=0009 13:57:05 Check angles 13:57:05 SkyScan query 13:57:06 SkyScan query done: ret=0 az=82.14<-5476 ze=-26.7<-13780 Statuses=0009 0009 13:57:06 Msec=2250 True Az=82.14 Ze=-26.7 Az status=0009 Ze status=0009 13:57:06 Check angles 13:57:06 SkyScan query 13:57:06 SkyScan query done: ret=0 az=64.56<-4304 ze=-38.565<-14571 Statuses=0009 0008 13:57:06 Msec=3000 True Az=64.56 Ze=-38.565 Az status=0009 Ze status=0008 13:57:07 Check angles 13:57:07 SkyScan query 13:57:07 SkyScan query done: ret=0 az=47.1<-3140 ze=-38.535<-14569 Statuses=0009 0008 13:57:07 Msec=3750 True Az=47.1 Ze=-38.535 Az status=0009 Ze status=0008 13:57:07 Check angles 13:57:07 SkyScan query 13:57:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:57:08 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:57:08 Message to Master queued w/err=0: serial=66906 error=0 13:57:13 Received message from Master: op=Filter serial=66907 13:57:13 Color wheel filter change from 0 to 0 13:57:13 FLIGetFilterPos err=0 currentPosition=0 13:57:13 FLIGetStepsRemaining err=0 RemainingSteps=0 13:57:13 Filter is already there-color wheel unchanged 13:57:13 Received message from Master: op=Shutter serial=66908 13:57:13 Shutter LASER close 13:57:13 Received message from Camera: op=State serial=66910 13:57:13 GetSingleValue result=40 Value=cccccccc 13:57:13 SkyScan query 13:57:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:57:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:14 Parameters OK 13:57:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:14 Set A/D data flow result=40 13:57:14 Set A/D channel type result=40 13:57:14 Set A/D encoding result=40 13:57:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:14 Set channel filter=0.000000e+000 result=40 13:57:14 Config A/D Result=40 13:57:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:14 Get A/D filter: -9.255963e+061 result=40 13:57:14 Get A/D value=-858993460 result=40 13:57:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:14 Parameters OK 13:57:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:14 Set A/D data flow result=40 13:57:14 Set A/D channel type result=40 13:57:14 Set A/D encoding result=40 13:57:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:14 Set channel filter=0.000000e+000 result=40 13:57:14 Config A/D Result=40 13:57:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:14 Get A/D filter: -9.255963e+061 result=40 13:57:14 Get A/D value=-858993460 result=40 13:57:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:57:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:57:14 Aux= 13:57:14 Message to Camera, serial 66910 queued 13:57:50 Received message from Master: op=PointingHead serial=66923 13:57:50 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:57:50 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:57:51 Point started: ret=0 13:57:51 point_skyscan result=0 13:57:52 Check angles 13:57:52 SkyScan query 13:57:52 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.025<-16535 Statuses=0009 0009 13:57:52 Msec=0 True Az=63.81 Ze=-68.025 Az status=0009 Ze status=0009 13:57:52 Check angles 13:57:52 SkyScan query 13:57:53 SkyScan query done: ret=0 az=81.15<-5410 ze=-88.995<-17933 Statuses=0009 0009 13:57:53 Msec=750 True Az=81.15 Ze=-88.995 Az status=0009 Ze status=0009 13:57:53 Check angles 13:57:53 SkyScan query 13:57:54 SkyScan query done: ret=0 az=98.745<-6583 ze=-109.95<-19330 Statuses=0009 0009 13:57:54 Msec=1500 True Az=98.745 Ze=-109.95 Az status=0009 Ze status=0009 13:57:54 Check angles 13:57:54 SkyScan query 13:57:54 SkyScan query done: ret=0 az=116.235<-7749 ze=-130.92<-20728 Statuses=0009 0009 13:57:54 Msec=2250 True Az=116.235 Ze=-130.92 Az status=0009 Ze status=0009 13:57:55 Check angles 13:57:55 SkyScan query 13:57:55 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 13:57:55 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 13:57:55 Check angles 13:57:55 SkyScan query 13:57:56 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:57:56 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:57:56 Message to Master queued w/err=0: serial=66923 error=0 13:58:01 Received message from Master: op=Filter serial=66924 13:58:01 Color wheel filter change from 0 to 0 13:58:01 FLIGetFilterPos err=0 currentPosition=0 13:58:01 FLIGetStepsRemaining err=0 RemainingSteps=0 13:58:01 Filter is already there-color wheel unchanged 13:58:01 Received message from Master: op=Shutter serial=66925 13:58:01 Shutter LASER close 13:58:01 Received message from Camera: op=State serial=66927 13:58:01 GetSingleValue result=40 Value=cccccccc 13:58:01 SkyScan query 13:58:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:58:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:02 Parameters OK 13:58:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:02 Set A/D data flow result=40 13:58:02 Set A/D channel type result=40 13:58:02 Set A/D encoding result=40 13:58:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:02 Set channel filter=0.000000e+000 result=40 13:58:02 Config A/D Result=40 13:58:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:02 Get A/D filter: -9.255963e+061 result=40 13:58:02 Get A/D value=-858993460 result=40 13:58:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:02 Parameters OK 13:58:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:02 Set A/D data flow result=40 13:58:02 Set A/D channel type result=40 13:58:02 Set A/D encoding result=40 13:58:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:02 Set channel filter=0.000000e+000 result=40 13:58:02 Config A/D Result=40 13:58:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:02 Get A/D filter: -9.255963e+061 result=40 13:58:02 Get A/D value=-858993460 result=40 13:58:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:02 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:58:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:58:02 Aux= 13:58:02 Message to Camera, serial 66927 queued 13:58:39 Received message from Master: op=PointingHead serial=66940 13:58:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:58:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:58:39 Point started: ret=0 13:58:39 point_skyscan result=0 13:58:40 Check angles 13:58:40 SkyScan query 13:58:40 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.06<-23404 Statuses=0009 0009 13:58:40 Msec=0 True Az=113.01 Ze=-171.06 Az status=0009 Ze status=0009 13:58:40 Check angles 13:58:40 SkyScan query 13:58:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:58:41 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:58:41 Message to Master queued w/err=0: serial=66940 error=0 13:58:46 Received message from Master: op=Filter serial=66941 13:58:46 Color wheel filter change from 0 to 0 13:58:46 FLIGetFilterPos err=0 currentPosition=0 13:58:46 FLIGetStepsRemaining err=0 RemainingSteps=0 13:58:46 Filter is already there-color wheel unchanged 13:58:46 Received message from Master: op=Shutter serial=66942 13:58:46 Shutter LASER open 13:58:46 Received message from Camera: op=State serial=66944 13:58:46 GetSingleValue result=40 Value=cccccccc 13:58:46 SkyScan query 13:58:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:58:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:47 Parameters OK 13:58:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:47 Set A/D data flow result=40 13:58:47 Set A/D channel type result=40 13:58:47 Set A/D encoding result=40 13:58:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:47 Set channel filter=0.000000e+000 result=40 13:58:47 Config A/D Result=40 13:58:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:47 Get A/D filter: -9.255963e+061 result=40 13:58:47 Get A/D value=-858993460 result=40 13:58:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:47 Parameters OK 13:58:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:47 Set A/D data flow result=40 13:58:47 Set A/D channel type result=40 13:58:47 Set A/D encoding result=40 13:58:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:47 Set channel filter=0.000000e+000 result=40 13:58:47 Config A/D Result=40 13:58:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:47 Get A/D filter: -9.255963e+061 result=40 13:58:47 Get A/D value=-858993460 result=40 13:58:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:58:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:58:47 Aux= 13:58:47 Message to Camera, serial 66944 queued 13:58:55 Received message from Master: op=Shutter serial=66954 13:58:55 Shutter LASER close 13:58:56 Received message from Master: op=PointingHead serial=66958 13:58:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:58:56 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:58:56 Point started: ret=0 13:58:56 point_skyscan result=0 13:58:57 Check angles 13:58:57 SkyScan query 13:58:58 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.37<-21558 Statuses=0009 0009 13:58:58 Msec=0 True Az=135.9 Ze=-143.37 Az status=0009 Ze status=0009 13:58:58 Check angles 13:58:58 SkyScan query 13:58:58 SkyScan query done: ret=0 az=153.42<-10228 ze=-122.415<-20161 Statuses=0009 0009 13:58:58 Msec=750 True Az=153.42 Ze=-122.415 Az status=0009 Ze status=0009 13:58:58 Check angles 13:58:58 SkyScan query 13:58:59 SkyScan query done: ret=0 az=170.835<-11389 ze=-101.535<-18769 Statuses=0009 0009 13:58:59 Msec=1500 True Az=170.835 Ze=-101.535 Az status=0009 Ze status=0009 13:58:59 Check angles 13:58:59 SkyScan query 13:59:00 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.505<-17367 Statuses=0008 0009 13:59:00 Msec=2250 True Az=176.025 Ze=-80.505 Az status=0008 Ze status=0009 13:59:00 Check angles 13:59:00 SkyScan query 13:59:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.145<-15943 Statuses=0008 0009 13:59:01 Msec=3000 True Az=176.01 Ze=-59.145 Az status=0008 Ze status=0009 13:59:01 Check angles 13:59:01 SkyScan query 13:59:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:59:01 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:59:01 Message to Master queued w/err=0: serial=66958 error=0 13:59:06 Received message from Master: op=Filter serial=66959 13:59:06 Color wheel filter change from 0 to 0 13:59:06 FLIGetFilterPos err=0 currentPosition=0 13:59:06 FLIGetStepsRemaining err=0 RemainingSteps=0 13:59:06 Filter is already there-color wheel unchanged 13:59:06 Received message from Master: op=Shutter serial=66960 13:59:06 Shutter LASER close 13:59:07 Received message from Camera: op=State serial=66962 13:59:07 GetSingleValue result=40 Value=cccccccc 13:59:07 SkyScan query 13:59:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:59:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:07 Parameters OK 13:59:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:07 Set A/D data flow result=40 13:59:07 Set A/D channel type result=40 13:59:07 Set A/D encoding result=40 13:59:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:07 Set channel filter=0.000000e+000 result=40 13:59:07 Config A/D Result=40 13:59:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:07 Get A/D filter: -9.255963e+061 result=40 13:59:07 Get A/D value=-858993460 result=40 13:59:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:07 Parameters OK 13:59:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:07 Set A/D data flow result=40 13:59:07 Set A/D channel type result=40 13:59:07 Set A/D encoding result=40 13:59:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:07 Set channel filter=0.000000e+000 result=40 13:59:07 Config A/D Result=40 13:59:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:07 Get A/D filter: -9.255963e+061 result=40 13:59:07 Get A/D value=-858993460 result=40 13:59:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:59:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:59:07 Aux= 13:59:07 Message to Camera, serial 66962 queued 13:59:44 Received message from Master: op=PointingHead serial=66975 13:59:44 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:59:44 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:59:44 Point started: ret=0 13:59:44 point_skyscan result=0 13:59:45 Check angles 13:59:45 SkyScan query 13:59:46 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.825<-13455 Statuses=0009 0009 13:59:46 Msec=0 True Az=152.985 Ze=-21.825 Az status=0009 Ze status=0009 13:59:46 Check angles 13:59:46 SkyScan query 13:59:47 SkyScan query done: ret=0 az=135.225<-9015 ze=-0.39<-12026 Statuses=0009 0009 13:59:47 Msec=750 True Az=135.225 Ze=-0.39 Az status=0009 Ze status=0009 13:59:47 Check angles 13:59:47 SkyScan query 13:59:47 SkyScan query done: ret=0 az=117.66<-7844 ze=20.55<-10630 Statuses=0009 0009 13:59:47 Msec=1500 True Az=117.66 Ze=20.55 Az status=0009 Ze status=0009 13:59:47 Check angles 13:59:47 SkyScan query 13:59:48 SkyScan query done: ret=0 az=99.96<-6664 ze=41.955<-9203 Statuses=0009 0009 13:59:48 Msec=2250 True Az=99.96 Ze=41.955 Az status=0009 Ze status=0009 13:59:48 Check angles 13:59:48 SkyScan query 13:59:49 SkyScan query done: ret=0 az=86.07<-5738 ze=51.54<-8564 Statuses=0009 0008 13:59:49 Msec=3000 True Az=86.07 Ze=51.54 Az status=0009 Ze status=0008 13:59:49 Check angles 13:59:49 SkyScan query 13:59:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:59:50 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:59:50 Message to Master queued w/err=0: serial=66975 error=0 13:59:55 Received message from Master: op=Filter serial=66976 13:59:55 Color wheel filter change from 0 to 0 13:59:55 FLIGetFilterPos err=0 currentPosition=0 13:59:55 FLIGetStepsRemaining err=0 RemainingSteps=0 13:59:55 Filter is already there-color wheel unchanged 13:59:55 Received message from Master: op=Shutter serial=66977 13:59:55 Shutter LASER close 13:59:55 Received message from Camera: op=State serial=66979 13:59:55 GetSingleValue result=40 Value=cccccccc 13:59:55 SkyScan query 13:59:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:59:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:55 Parameters OK 13:59:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:55 Set A/D data flow result=40 13:59:55 Set A/D channel type result=40 13:59:55 Set A/D encoding result=40 13:59:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:55 Set channel filter=0.000000e+000 result=40 13:59:55 Config A/D Result=40 13:59:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:55 Get A/D filter: -9.255963e+061 result=40 13:59:55 Get A/D value=-858993460 result=40 13:59:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:55 Parameters OK 13:59:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:55 Set A/D data flow result=40 13:59:55 Set A/D channel type result=40 13:59:55 Set A/D encoding result=40 13:59:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:55 Set channel filter=0.000000e+000 result=40 13:59:55 Config A/D Result=40 13:59:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:55 Get A/D filter: -9.255963e+061 result=40 13:59:55 Get A/D value=-858993460 result=40 13:59:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:59:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:59:55 Aux= 13:59:55 Message to Camera, serial 66979 queued 14:00:31 Received message from Master: op=PointingHead serial=66991 14:00:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:00:31 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:00:32 Point started: ret=0 14:00:32 point_skyscan result=0 14:00:32 Check angles 14:00:32 SkyScan query 14:00:33 SkyScan query done: ret=0 az=108.795<-7253 ze=38.49<-9434 Statuses=0009 0008 14:00:33 Msec=0 True Az=108.795 Ze=38.49 Az status=0009 Ze status=0008 14:00:33 Check angles 14:00:33 SkyScan query 14:00:34 SkyScan query done: ret=0 az=126.495<-8433 ze=38.505<-9433 Statuses=0009 0008 14:00:34 Msec=750 True Az=126.495 Ze=38.505 Az status=0009 Ze status=0008 14:00:34 Check angles 14:00:34 SkyScan query 14:00:34 SkyScan query done: ret=0 az=143.835<-9589 ze=38.505<-9433 Statuses=0009 0008 14:00:34 Msec=1500 True Az=143.835 Ze=38.505 Az status=0009 Ze status=0008 14:00:35 Check angles 14:00:35 SkyScan query 14:00:35 SkyScan query done: ret=0 az=161.19<-10746 ze=38.505<-9433 Statuses=0009 0008 14:00:35 Msec=2250 True Az=161.19 Ze=38.505 Az status=0009 Ze status=0008 14:00:35 Check angles 14:00:35 SkyScan query 14:00:36 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 14:00:36 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 14:00:36 Check angles 14:00:36 SkyScan query 14:00:37 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:00:37 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:00:37 Message to Master queued w/err=0: serial=66991 error=0 14:00:42 Received message from Master: op=Filter serial=66992 14:00:42 Color wheel filter change from 0 to 0 14:00:42 FLIGetFilterPos err=0 currentPosition=0 14:00:42 FLIGetStepsRemaining err=0 RemainingSteps=0 14:00:42 Filter is already there-color wheel unchanged 14:00:42 Received message from Master: op=Shutter serial=66993 14:00:42 Shutter LASER close 14:00:42 Received message from Camera: op=State serial=66995 14:00:42 GetSingleValue result=40 Value=cccccccc 14:00:42 SkyScan query 14:00:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:00:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:42 Parameters OK 14:00:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:42 Set A/D data flow result=40 14:00:42 Set A/D channel type result=40 14:00:42 Set A/D encoding result=40 14:00:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:42 Set channel filter=0.000000e+000 result=40 14:00:42 Config A/D Result=40 14:00:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:42 Get A/D filter: -9.255963e+061 result=40 14:00:42 Get A/D value=-858993460 result=40 14:00:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:42 Parameters OK 14:00:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:42 Set A/D data flow result=40 14:00:42 Set A/D channel type result=40 14:00:42 Set A/D encoding result=40 14:00:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:42 Set channel filter=0.000000e+000 result=40 14:00:42 Config A/D Result=40 14:00:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:42 Get A/D filter: -9.255963e+061 result=40 14:00:42 Get A/D value=-858993460 result=40 14:00:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:00:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:00:42 Aux= 14:00:42 Message to Camera, serial 66995 queued 14:01:19 Received message from Master: op=PointingHead serial=67008 14:01:19 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:01:19 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:01:20 Point started: ret=0 14:01:20 point_skyscan result=0 14:01:20 Check angles 14:01:20 SkyScan query 14:01:21 SkyScan query done: ret=0 az=152.79<-10186 ze=8.355<-11443 Statuses=0009 0009 14:01:21 Msec=0 True Az=152.79 Ze=8.355 Az status=0009 Ze status=0009 14:01:21 Check angles 14:01:21 SkyScan query 14:01:22 SkyScan query done: ret=0 az=134.94<-8996 ze=-13.035<-12869 Statuses=0009 0009 14:01:22 Msec=750 True Az=134.94 Ze=-13.035 Az status=0009 Ze status=0009 14:01:22 Check angles 14:01:22 SkyScan query 14:01:23 SkyScan query done: ret=0 az=117.36<-7824 ze=-33.99<-14266 Statuses=0009 0009 14:01:23 Msec=1500 True Az=117.36 Ze=-33.99 Az status=0009 Ze status=0009 14:01:23 Check angles 14:01:23 SkyScan query 14:01:23 SkyScan query done: ret=0 az=100.035<-6669 ze=-51.57<-15438 Statuses=0009 0009 14:01:23 Msec=2250 True Az=100.035 Ze=-51.57 Az status=0009 Ze status=0009 14:01:23 Check angles 14:01:23 SkyScan query 14:01:24 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.525<-15435 Statuses=0009 0008 14:01:24 Msec=3000 True Az=86.04 Ze=-51.525 Az status=0009 Ze status=0008 14:01:24 Check angles 14:01:24 SkyScan query 14:01:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:01:25 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:01:25 Message to Master queued w/err=0: serial=67008 error=0 14:01:30 Received message from Master: op=Filter serial=67009 14:01:30 Color wheel filter change from 0 to 0 14:01:30 FLIGetFilterPos err=0 currentPosition=0 14:01:30 FLIGetStepsRemaining err=0 RemainingSteps=0 14:01:30 Filter is already there-color wheel unchanged 14:01:30 Received message from Master: op=Shutter serial=67010 14:01:30 Shutter LASER close 14:01:30 Received message from Camera: op=State serial=67012 14:01:30 GetSingleValue result=40 Value=cccccccc 14:01:30 SkyScan query 14:01:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:01:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:31 Parameters OK 14:01:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:31 Set A/D data flow result=40 14:01:31 Set A/D channel type result=40 14:01:31 Set A/D encoding result=40 14:01:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:31 Set channel filter=0.000000e+000 result=40 14:01:31 Config A/D Result=40 14:01:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:31 Get A/D filter: -9.255963e+061 result=40 14:01:31 Get A/D value=-858993460 result=40 14:01:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:31 Parameters OK 14:01:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:31 Set A/D data flow result=40 14:01:31 Set A/D channel type result=40 14:01:31 Set A/D encoding result=40 14:01:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:31 Set channel filter=0.000000e+000 result=40 14:01:31 Config A/D Result=40 14:01:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:31 Get A/D filter: -9.255963e+061 result=40 14:01:31 Get A/D value=-858993460 result=40 14:01:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:01:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:01:31 Aux= 14:01:31 Message to Camera, serial 67012 queued 14:02:07 Received message from Master: op=PointingHead serial=67025 14:02:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:02:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:02:08 Point started: ret=0 14:02:08 point_skyscan result=0 14:02:09 Check angles 14:02:09 SkyScan query 14:02:09 SkyScan query done: ret=0 az=108.825<-7255 ze=-80.985<-17399 Statuses=0009 0009 14:02:09 Msec=0 True Az=108.825 Ze=-80.985 Az status=0009 Ze status=0009 14:02:09 Check angles 14:02:09 SkyScan query 14:02:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.94<-18796 Statuses=0008 0009 14:02:10 Msec=750 True Az=112.995 Ze=-101.94 Az status=0008 Ze status=0009 14:02:10 Check angles 14:02:10 SkyScan query 14:02:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.91<-20194 Statuses=0008 0009 14:02:11 Msec=1500 True Az=112.995 Ze=-122.91 Az status=0008 Ze status=0009 14:02:11 Check angles 14:02:11 SkyScan query 14:02:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.865<-21591 Statuses=0008 0009 14:02:11 Msec=2250 True Az=112.995 Ze=-143.865 Az status=0008 Ze status=0009 14:02:12 Check angles 14:02:12 SkyScan query 14:02:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.82<-22988 Statuses=0008 0009 14:02:12 Msec=3000 True Az=112.995 Ze=-164.82 Az status=0008 Ze status=0009 14:02:12 Check angles 14:02:12 SkyScan query 14:02:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 14:02:13 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 14:02:13 Message to Master queued w/err=0: serial=67025 error=0 14:02:18 Received message from Master: op=Filter serial=67026 14:02:18 Color wheel filter change from 0 to 0 14:02:18 FLIGetFilterPos err=0 currentPosition=0 14:02:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:02:18 Filter is already there-color wheel unchanged 14:02:18 Received message from Master: op=Shutter serial=67027 14:02:18 Shutter LASER open 14:02:18 Received message from Camera: op=State serial=67029 14:02:18 GetSingleValue result=40 Value=cccccccc 14:02:18 SkyScan query 14:02:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:02:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:19 Parameters OK 14:02:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:19 Set A/D data flow result=40 14:02:19 Set A/D channel type result=40 14:02:19 Set A/D encoding result=40 14:02:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:19 Set channel filter=0.000000e+000 result=40 14:02:19 Config A/D Result=40 14:02:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:19 Get A/D filter: -9.255963e+061 result=40 14:02:19 Get A/D value=-858993460 result=40 14:02:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:19 Parameters OK 14:02:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:19 Set A/D data flow result=40 14:02:19 Set A/D channel type result=40 14:02:19 Set A/D encoding result=40 14:02:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:19 Set channel filter=0.000000e+000 result=40 14:02:19 Config A/D Result=40 14:02:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:19 Get A/D filter: -9.255963e+061 result=40 14:02:19 Get A/D value=-858993460 result=40 14:02:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:02:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:02:19 Aux= 14:02:19 Message to Camera, serial 67029 queued 14:02:27 Received message from Master: op=Shutter serial=67039 14:02:27 Shutter LASER close 14:02:28 Received message from Master: op=PointingHead serial=67043 14:02:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:02:28 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:02:28 Point started: ret=0 14:02:28 point_skyscan result=0 14:02:29 Check angles 14:02:29 SkyScan query 14:02:29 SkyScan query done: ret=0 az=89.91<-5994 ze=157.335<-1511 Statuses=0009 0009 14:02:29 Msec=0 True Az=89.91 Ze=157.335 Az status=0009 Ze status=0009 14:02:29 Check angles 14:02:29 SkyScan query 14:02:30 SkyScan query done: ret=0 az=72.495<-4833 ze=136.35<-2910 Statuses=0009 0009 14:02:30 Msec=750 True Az=72.495 Ze=136.35 Az status=0009 Ze status=0009 14:02:30 Check angles 14:02:30 SkyScan query 14:02:31 SkyScan query done: ret=0 az=55.11<-3674 ze=115.455<-4303 Statuses=0009 0009 14:02:31 Msec=1500 True Az=55.11 Ze=115.455 Az status=0009 Ze status=0009 14:02:31 Check angles 14:02:31 SkyScan query 14:02:32 SkyScan query done: ret=0 az=40.875<-2725 ze=94.425<-5705 Statuses=0009 0009 14:02:32 Msec=2250 True Az=40.875 Ze=94.425 Az status=0009 Ze status=0009 14:02:32 Check angles 14:02:32 SkyScan query 14:02:32 SkyScan query done: ret=0 az=40.995<-2733 ze=73.5<-7100 Statuses=0008 0009 14:02:32 Msec=3000 True Az=40.995 Ze=73.5 Az status=0008 Ze status=0009 14:02:32 Check angles 14:02:32 SkyScan query 14:02:33 SkyScan query done: ret=0 az=40.995<-2733 ze=52.875<-8475 Statuses=0008 0009 14:02:33 Msec=3750 True Az=40.995 Ze=52.875 Az status=0008 Ze status=0009 14:02:33 Check angles 14:02:33 SkyScan query 14:02:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:02:34 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:02:34 Message to Master queued w/err=0: serial=67043 error=0 14:02:39 Received message from Master: op=Filter serial=67044 14:02:39 Color wheel filter change from 0 to 0 14:02:39 FLIGetFilterPos err=0 currentPosition=0 14:02:39 FLIGetStepsRemaining err=0 RemainingSteps=0 14:02:39 Filter is already there-color wheel unchanged 14:02:39 Received message from Master: op=Shutter serial=67045 14:02:39 Shutter LASER close 14:02:39 Received message from Camera: op=State serial=67047 14:02:39 GetSingleValue result=40 Value=cccccccc 14:02:39 SkyScan query 14:02:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:02:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:40 Parameters OK 14:02:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:40 Set A/D data flow result=40 14:02:40 Set A/D channel type result=40 14:02:40 Set A/D encoding result=40 14:02:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:40 Set channel filter=0.000000e+000 result=40 14:02:40 Config A/D Result=40 14:02:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:40 Get A/D filter: -9.255963e+061 result=40 14:02:40 Get A/D value=-858993460 result=40 14:02:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:40 Parameters OK 14:02:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:40 Set A/D data flow result=40 14:02:40 Set A/D channel type result=40 14:02:40 Set A/D encoding result=40 14:02:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:40 Set channel filter=0.000000e+000 result=40 14:02:40 Config A/D Result=40 14:02:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:40 Get A/D filter: -9.255963e+061 result=40 14:02:40 Get A/D value=-858993460 result=40 14:02:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:02:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:02:40 Aux= 14:02:40 Message to Camera, serial 67047 queued 14:03:17 Received message from Master: op=PointingHead serial=67060 14:03:17 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:03:17 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:03:17 Point started: ret=0 14:03:17 point_skyscan result=0 14:03:18 Check angles 14:03:18 SkyScan query 14:03:18 SkyScan query done: ret=0 az=63.81<-4254 ze=66.555<-7563 Statuses=0009 0008 14:03:18 Msec=0 True Az=63.81 Ze=66.555 Az status=0009 Ze status=0008 14:03:18 Check angles 14:03:18 SkyScan query 14:03:19 SkyScan query done: ret=0 az=81.54<-5436 ze=66.51<-7566 Statuses=0009 0008 14:03:19 Msec=750 True Az=81.54 Ze=66.51 Az status=0009 Ze status=0008 14:03:19 Check angles 14:03:19 SkyScan query 14:03:20 SkyScan query done: ret=0 az=99.69<-6646 ze=66.495<-7567 Statuses=0009 0008 14:03:20 Msec=1500 True Az=99.69 Ze=66.495 Az status=0009 Ze status=0008 14:03:20 Check angles 14:03:20 SkyScan query 14:03:21 SkyScan query done: ret=0 az=117.39<-7826 ze=66.495<-7567 Statuses=0009 0008 14:03:21 Msec=2250 True Az=117.39 Ze=66.495 Az status=0009 Ze status=0008 14:03:21 Check angles 14:03:21 SkyScan query 14:03:21 SkyScan query done: ret=0 az=134.79<-8986 ze=66.495<-7567 Statuses=0009 0008 14:03:21 Msec=3000 True Az=134.79 Ze=66.495 Az status=0009 Ze status=0008 14:03:21 Check angles 14:03:21 SkyScan query 14:03:22 SkyScan query done: ret=0 az=152.355<-10157 ze=66.495<-7567 Statuses=0009 0008 14:03:22 Msec=3750 True Az=152.355 Ze=66.495 Az status=0009 Ze status=0008 14:03:22 Check angles 14:03:22 SkyScan query 14:03:23 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 14:03:23 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 14:03:23 Message to Master queued w/err=0: serial=67060 error=0 14:03:28 Received message from Master: op=Filter serial=67061 14:03:28 Color wheel filter change from 0 to 0 14:03:28 FLIGetFilterPos err=0 currentPosition=0 14:03:28 FLIGetStepsRemaining err=0 RemainingSteps=0 14:03:28 Filter is already there-color wheel unchanged 14:03:28 Received message from Master: op=Shutter serial=67062 14:03:28 Shutter LASER close 14:03:28 Received message from Camera: op=State serial=67064 14:03:28 GetSingleValue result=40 Value=cccccccc 14:03:28 SkyScan query 14:03:29 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:03:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:29 Parameters OK 14:03:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:29 Set A/D data flow result=40 14:03:29 Set A/D channel type result=40 14:03:29 Set A/D encoding result=40 14:03:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:29 Set channel filter=0.000000e+000 result=40 14:03:29 Config A/D Result=40 14:03:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:29 Get A/D filter: -9.255963e+061 result=40 14:03:29 Get A/D value=-858993460 result=40 14:03:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:29 Parameters OK 14:03:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:29 Set A/D data flow result=40 14:03:29 Set A/D channel type result=40 14:03:29 Set A/D encoding result=40 14:03:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:29 Set channel filter=0.000000e+000 result=40 14:03:29 Config A/D Result=40 14:03:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:29 Get A/D filter: -9.255963e+061 result=40 14:03:29 Get A/D value=-858993460 result=40 14:03:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:29 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:03:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:03:29 Aux= 14:03:29 Message to Camera, serial 67064 queued 14:04:05 Received message from Master: op=PointingHead serial=67077 14:04:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:04:05 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:04:06 Point started: ret=0 14:04:06 point_skyscan result=0 14:04:07 Check angles 14:04:07 SkyScan query 14:04:07 SkyScan query done: ret=0 az=134.76<-8984 ze=36.435<-9571 Statuses=0009 0009 14:04:07 Msec=0 True Az=134.76 Ze=36.435 Az status=0009 Ze status=0009 14:04:07 Check angles 14:04:07 SkyScan query 14:04:08 SkyScan query done: ret=0 az=116.88<-7792 ze=15.06<-10996 Statuses=0009 0009 14:04:08 Msec=750 True Az=116.88 Ze=15.06 Az status=0009 Ze status=0009 14:04:08 Check angles 14:04:08 SkyScan query 14:04:09 SkyScan query done: ret=0 az=99.075<-6605 ze=-6.375<-12425 Statuses=0009 0009 14:04:09 Msec=1500 True Az=99.075 Ze=-6.375 Az status=0009 Ze status=0009 14:04:09 Check angles 14:04:09 SkyScan query 14:04:09 SkyScan query done: ret=0 az=81.675<-5445 ze=-27.36<-13824 Statuses=0009 0009 14:04:09 Msec=2250 True Az=81.675 Ze=-27.36 Az status=0009 Ze status=0009 14:04:10 Check angles 14:04:10 SkyScan query 14:04:10 SkyScan query done: ret=0 az=64.14<-4276 ze=-38.565<-14571 Statuses=0009 0008 14:04:10 Msec=3000 True Az=64.14 Ze=-38.565 Az status=0009 Ze status=0008 14:04:10 Check angles 14:04:10 SkyScan query 14:04:11 SkyScan query done: ret=0 az=46.665<-3111 ze=-38.52<-14568 Statuses=0009 0008 14:04:11 Msec=3750 True Az=46.665 Ze=-38.52 Az status=0009 Ze status=0008 14:04:11 Check angles 14:04:11 SkyScan query 14:04:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:04:12 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:04:12 Message to Master queued w/err=0: serial=67077 error=0 14:04:17 Received message from Master: op=Filter serial=67078 14:04:17 Color wheel filter change from 0 to 0 14:04:17 FLIGetFilterPos err=0 currentPosition=0 14:04:17 FLIGetStepsRemaining err=0 RemainingSteps=0 14:04:17 Filter is already there-color wheel unchanged 14:04:17 Received message from Master: op=Shutter serial=67079 14:04:17 Shutter LASER close 14:04:17 Received message from Camera: op=State serial=67081 14:04:17 GetSingleValue result=40 Value=cccccccc 14:04:17 SkyScan query 14:04:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:04:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:17 Parameters OK 14:04:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:17 Set A/D data flow result=40 14:04:17 Set A/D channel type result=40 14:04:17 Set A/D encoding result=40 14:04:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:17 Set channel filter=0.000000e+000 result=40 14:04:17 Config A/D Result=40 14:04:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:17 Get A/D filter: -9.255963e+061 result=40 14:04:17 Get A/D value=-858993460 result=40 14:04:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:17 Parameters OK 14:04:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:17 Set A/D data flow result=40 14:04:17 Set A/D channel type result=40 14:04:17 Set A/D encoding result=40 14:04:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:17 Set channel filter=0.000000e+000 result=40 14:04:17 Config A/D Result=40 14:04:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:17 Get A/D filter: -9.255963e+061 result=40 14:04:17 Get A/D value=-858993460 result=40 14:04:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:04:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:04:17 Aux= 14:04:17 Message to Camera, serial 67081 queued 14:04:54 Received message from Master: op=PointingHead serial=67094 14:04:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:04:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:04:55 Point started: ret=0 14:04:55 point_skyscan result=0 14:04:55 Check angles 14:04:55 SkyScan query 14:04:56 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.28<-16552 Statuses=0009 0009 14:04:56 Msec=0 True Az=64.005 Ze=-68.28 Az status=0009 Ze status=0009 14:04:56 Check angles 14:04:56 SkyScan query 14:04:57 SkyScan query done: ret=0 az=81.72<-5448 ze=-89.715<-17981 Statuses=0009 0009 14:04:57 Msec=750 True Az=81.72 Ze=-89.715 Az status=0009 Ze status=0009 14:04:57 Check angles 14:04:57 SkyScan query 14:04:57 SkyScan query done: ret=0 az=99.705<-6647 ze=-111.09<-19406 Statuses=0009 0009 14:04:57 Msec=1500 True Az=99.705 Ze=-111.09 Az status=0009 Ze status=0009 14:04:58 Check angles 14:04:58 SkyScan query 14:04:58 SkyScan query done: ret=0 az=117.33<-7822 ze=-132.015<-20801 Statuses=0009 0009 14:04:58 Msec=2250 True Az=117.33 Ze=-132.015 Az status=0009 Ze status=0009 14:04:58 Check angles 14:04:58 SkyScan query 14:04:59 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 14:04:59 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 14:04:59 Check angles 14:04:59 SkyScan query 14:05:00 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:05:00 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:05:00 Message to Master queued w/err=0: serial=67094 error=0 14:05:05 Received message from Master: op=Filter serial=67095 14:05:05 Color wheel filter change from 0 to 0 14:05:05 FLIGetFilterPos err=0 currentPosition=0 14:05:05 FLIGetStepsRemaining err=0 RemainingSteps=0 14:05:05 Filter is already there-color wheel unchanged 14:05:05 Received message from Master: op=Shutter serial=67096 14:05:05 Shutter LASER close 14:05:05 Received message from Camera: op=State serial=67098 14:05:05 GetSingleValue result=40 Value=cccccccc 14:05:05 SkyScan query 14:05:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:05:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:06 Parameters OK 14:05:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:06 Set A/D data flow result=40 14:05:06 Set A/D channel type result=40 14:05:06 Set A/D encoding result=40 14:05:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:06 Set channel filter=0.000000e+000 result=40 14:05:06 Config A/D Result=40 14:05:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:06 Get A/D filter: -9.255963e+061 result=40 14:05:06 Get A/D value=-858993460 result=40 14:05:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:06 Parameters OK 14:05:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:06 Set A/D data flow result=40 14:05:06 Set A/D channel type result=40 14:05:06 Set A/D encoding result=40 14:05:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:06 Set channel filter=0.000000e+000 result=40 14:05:06 Config A/D Result=40 14:05:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:06 Get A/D filter: -9.255963e+061 result=40 14:05:06 Get A/D value=-858993460 result=40 14:05:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:06 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:05:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:05:06 Aux= 14:05:06 Message to Camera, serial 67098 queued 14:05:41 Received message from Master: op=PointingHead serial=67110 14:05:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:05:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:05:42 Point started: ret=0 14:05:42 point_skyscan result=0 14:05:43 Check angles 14:05:43 SkyScan query 14:05:43 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 14:05:43 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 14:05:43 Check angles 14:05:43 SkyScan query 14:05:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:05:44 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:05:44 Message to Master queued w/err=0: serial=67110 error=0 14:05:49 Received message from Master: op=Filter serial=67111 14:05:49 Color wheel filter change from 0 to 0 14:05:49 FLIGetFilterPos err=0 currentPosition=0 14:05:49 FLIGetStepsRemaining err=0 RemainingSteps=0 14:05:49 Filter is already there-color wheel unchanged 14:05:49 Received message from Master: op=Shutter serial=67112 14:05:49 Shutter LASER open 14:05:49 Received message from Camera: op=State serial=67114 14:05:49 GetSingleValue result=40 Value=cccccccc 14:05:49 SkyScan query 14:05:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:05:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:50 Parameters OK 14:05:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:50 Set A/D data flow result=40 14:05:50 Set A/D channel type result=40 14:05:50 Set A/D encoding result=40 14:05:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:50 Set channel filter=0.000000e+000 result=40 14:05:50 Config A/D Result=40 14:05:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:50 Get A/D filter: -9.255963e+061 result=40 14:05:50 Get A/D value=-858993460 result=40 14:05:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:50 Parameters OK 14:05:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:50 Set A/D data flow result=40 14:05:50 Set A/D channel type result=40 14:05:50 Set A/D encoding result=40 14:05:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:50 Set channel filter=0.000000e+000 result=40 14:05:50 Config A/D Result=40 14:05:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:50 Get A/D filter: -9.255963e+061 result=40 14:05:50 Get A/D value=-858993460 result=40 14:05:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:05:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:05:50 Aux= 14:05:50 Message to Camera, serial 67114 queued 14:05:58 Received message from Master: op=Shutter serial=67124 14:05:58 Shutter LASER close 14:05:59 Received message from Master: op=PointingHead serial=67128 14:05:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:05:59 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:05:59 Point started: ret=0 14:05:59 point_skyscan result=0 14:06:00 Check angles 14:06:00 SkyScan query 14:06:00 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.01<-21534 Statuses=0009 0009 14:06:00 Msec=0 True Az=136.155 Ze=-143.01 Az status=0009 Ze status=0009 14:06:01 Check angles 14:06:01 SkyScan query [UTC 2018-12-11 14:06:01] 14:06:01 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.04<-20136 Statuses=0009 0009 14:06:01 Msec=750 True Az=153.63 Ze=-122.04 Az status=0009 Ze status=0009 14:06:01 Check angles 14:06:01 SkyScan query 14:06:02 SkyScan query done: ret=0 az=171.21<-11414 ze=-101.13<-18742 Statuses=0009 0009 14:06:02 Msec=1500 True Az=171.21 Ze=-101.13 Az status=0009 Ze status=0009 14:06:02 Check angles 14:06:02 SkyScan query 14:06:03 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.725<-17315 Statuses=0008 0009 14:06:03 Msec=2250 True Az=176.025 Ze=-79.725 Az status=0008 Ze status=0009 14:06:03 Check angles 14:06:03 SkyScan query 14:06:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.725<-15915 Statuses=0008 0009 14:06:04 Msec=3000 True Az=175.995 Ze=-58.725 Az status=0008 Ze status=0009 14:06:04 Check angles 14:06:04 SkyScan query 14:06:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:06:04 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:06:04 Message to Master queued w/err=0: serial=67128 error=0 14:06:09 Received message from Master: op=Filter serial=67129 14:06:09 Color wheel filter change from 0 to 0 14:06:09 FLIGetFilterPos err=0 currentPosition=0 14:06:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:06:09 Filter is already there-color wheel unchanged 14:06:09 Received message from Master: op=Shutter serial=67130 14:06:09 Shutter LASER close 14:06:10 Received message from Camera: op=State serial=67132 14:06:10 GetSingleValue result=40 Value=cccccccc 14:06:10 SkyScan query 14:06:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:06:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:10 Parameters OK 14:06:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:10 Set A/D data flow result=40 14:06:10 Set A/D channel type result=40 14:06:10 Set A/D encoding result=40 14:06:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:10 Set channel filter=0.000000e+000 result=40 14:06:10 Config A/D Result=40 14:06:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:10 Get A/D filter: -9.255963e+061 result=40 14:06:10 Get A/D value=-858993460 result=40 14:06:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:10 Parameters OK 14:06:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:10 Set A/D data flow result=40 14:06:10 Set A/D channel type result=40 14:06:10 Set A/D encoding result=40 14:06:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:10 Set channel filter=0.000000e+000 result=40 14:06:10 Config A/D Result=40 14:06:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:10 Get A/D filter: -9.255963e+061 result=40 14:06:10 Get A/D value=-858993460 result=40 14:06:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:06:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:06:10 Aux= 14:06:10 Message to Camera, serial 67132 queued 14:06:47 Received message from Master: op=PointingHead serial=67145 14:06:47 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:06:47 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:06:47 Point started: ret=0 14:06:47 point_skyscan result=0 14:06:48 Check angles 14:06:48 SkyScan query 14:06:49 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.75<-13450 Statuses=0009 0009 14:06:49 Msec=0 True Az=152.94 Ze=-21.75 Az status=0009 Ze status=0009 14:06:49 Check angles 14:06:49 SkyScan query 14:06:49 SkyScan query done: ret=0 az=135.15<-9010 ze=-0.3<-12020 Statuses=0009 0009 14:06:49 Msec=750 True Az=135.15 Ze=-0.3 Az status=0009 Ze status=0009 14:06:50 Check angles 14:06:50 SkyScan query 14:06:50 SkyScan query done: ret=0 az=117.09<-7806 ze=21.09<-10594 Statuses=0009 0009 14:06:50 Msec=1500 True Az=117.09 Ze=21.09 Az status=0009 Ze status=0009 14:06:50 Check angles 14:06:50 SkyScan query 14:06:51 SkyScan query done: ret=0 az=99.84<-6656 ze=42.015<-9199 Statuses=0009 0009 14:06:51 Msec=2250 True Az=99.84 Ze=42.015 Az status=0009 Ze status=0009 14:06:51 Check angles 14:06:51 SkyScan query 14:06:52 SkyScan query done: ret=0 az=86.055<-5737 ze=51.54<-8564 Statuses=0009 0008 14:06:52 Msec=3000 True Az=86.055 Ze=51.54 Az status=0009 Ze status=0008 14:06:52 Check angles 14:06:52 SkyScan query 14:06:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:06:53 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:06:53 Message to Master queued w/err=0: serial=67145 error=0 14:06:58 Received message from Master: op=Filter serial=67146 14:06:58 Color wheel filter change from 0 to 0 14:06:58 FLIGetFilterPos err=0 currentPosition=0 14:06:58 FLIGetStepsRemaining err=0 RemainingSteps=0 14:06:58 Filter is already there-color wheel unchanged 14:06:58 Received message from Master: op=Shutter serial=67147 14:06:58 Shutter LASER close 14:06:58 Received message from Camera: op=State serial=67149 14:06:58 GetSingleValue result=40 Value=cccccccc 14:06:58 SkyScan query 14:06:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:06:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:58 Parameters OK 14:06:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:58 Set A/D data flow result=40 14:06:58 Set A/D channel type result=40 14:06:58 Set A/D encoding result=40 14:06:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:58 Set channel filter=0.000000e+000 result=40 14:06:58 Config A/D Result=40 14:06:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:58 Get A/D filter: -9.255963e+061 result=40 14:06:58 Get A/D value=-858993460 result=40 14:06:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:58 Parameters OK 14:06:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:58 Set A/D data flow result=40 14:06:58 Set A/D channel type result=40 14:06:58 Set A/D encoding result=40 14:06:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:58 Set channel filter=0.000000e+000 result=40 14:06:58 Config A/D Result=40 14:06:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:58 Get A/D filter: -9.255963e+061 result=40 14:06:58 Get A/D value=-858993460 result=40 14:06:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:06:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:06:58 Aux= 14:06:58 Message to Camera, serial 67149 queued 14:07:35 Received message from Master: op=PointingHead serial=67162 14:07:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:07:35 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:07:35 Point started: ret=0 14:07:35 point_skyscan result=0 14:07:36 Check angles 14:07:36 SkyScan query 14:07:37 SkyScan query done: ret=0 az=109.035<-7269 ze=38.49<-9434 Statuses=0009 0008 14:07:37 Msec=0 True Az=109.035 Ze=38.49 Az status=0009 Ze status=0008 14:07:37 Check angles 14:07:37 SkyScan query 14:07:38 SkyScan query done: ret=0 az=126.66<-8444 ze=38.505<-9433 Statuses=0009 0008 14:07:38 Msec=750 True Az=126.66 Ze=38.505 Az status=0009 Ze status=0008 14:07:38 Check angles 14:07:38 SkyScan query 14:07:38 SkyScan query done: ret=0 az=144.45<-9630 ze=38.505<-9433 Statuses=0009 0008 14:07:38 Msec=1500 True Az=144.45 Ze=38.505 Az status=0009 Ze status=0008 14:07:39 Check angles 14:07:39 SkyScan query 14:07:39 SkyScan query done: ret=0 az=161.79<-10786 ze=38.505<-9433 Statuses=0009 0008 14:07:39 Msec=2250 True Az=161.79 Ze=38.505 Az status=0009 Ze status=0008 14:07:39 Check angles 14:07:39 SkyScan query 14:07:40 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:07:40 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:07:40 Check angles 14:07:40 SkyScan query 14:07:41 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:07:41 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:07:41 Message to Master queued w/err=0: serial=67162 error=0 14:07:46 Received message from Master: op=Filter serial=67163 14:07:46 Color wheel filter change from 0 to 0 14:07:46 FLIGetFilterPos err=0 currentPosition=0 14:07:46 FLIGetStepsRemaining err=0 RemainingSteps=0 14:07:46 Filter is already there-color wheel unchanged 14:07:46 Received message from Master: op=Shutter serial=67164 14:07:46 Shutter LASER close 14:07:46 Received message from Camera: op=State serial=67166 14:07:46 GetSingleValue result=40 Value=cccccccc 14:07:46 SkyScan query 14:07:46 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:07:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:46 Parameters OK 14:07:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:46 Set A/D data flow result=40 14:07:46 Set A/D channel type result=40 14:07:46 Set A/D encoding result=40 14:07:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:46 Set channel filter=0.000000e+000 result=40 14:07:46 Config A/D Result=40 14:07:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:46 Get A/D filter: -9.255963e+061 result=40 14:07:46 Get A/D value=-858993460 result=40 14:07:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:46 Parameters OK 14:07:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:46 Set A/D data flow result=40 14:07:46 Set A/D channel type result=40 14:07:46 Set A/D encoding result=40 14:07:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:46 Set channel filter=0.000000e+000 result=40 14:07:46 Config A/D Result=40 14:07:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:46 Get A/D filter: -9.255963e+061 result=40 14:07:46 Get A/D value=-858993460 result=40 14:07:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:07:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:07:46 Aux= 14:07:46 Message to Camera, serial 67166 queued 14:08:23 Received message from Master: op=PointingHead serial=67179 14:08:23 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:08:23 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:08:24 Point started: ret=0 14:08:24 point_skyscan result=0 14:08:24 Check angles 14:08:24 SkyScan query 14:08:25 SkyScan query done: ret=0 az=152.79<-10186 ze=8.445<-11437 Statuses=0009 0009 14:08:25 Msec=0 True Az=152.79 Ze=8.445 Az status=0009 Ze status=0009 14:08:25 Check angles 14:08:25 SkyScan query 14:08:26 SkyScan query done: ret=0 az=135.285<-9019 ze=-12.495<-12833 Statuses=0009 0009 14:08:26 Msec=750 True Az=135.285 Ze=-12.495 Az status=0009 Ze status=0009 14:08:26 Check angles 14:08:26 SkyScan query 14:08:26 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.42<-14228 Statuses=0009 0009 14:08:26 Msec=1500 True Az=117.81 Ze=-33.42 Az status=0009 Ze status=0009 14:08:27 Check angles 14:08:27 SkyScan query 14:08:27 SkyScan query done: ret=0 az=100.365<-6691 ze=-51.54<-15436 Statuses=0009 0009 14:08:27 Msec=2250 True Az=100.365 Ze=-51.54 Az status=0009 Ze status=0009 14:08:27 Check angles 14:08:27 SkyScan query 14:08:28 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 14:08:28 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 14:08:28 Check angles 14:08:28 SkyScan query 14:08:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:08:29 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:08:29 Message to Master queued w/err=0: serial=67179 error=0 14:08:34 Received message from Master: op=Filter serial=67180 14:08:34 Color wheel filter change from 0 to 0 14:08:34 FLIGetFilterPos err=0 currentPosition=0 14:08:34 FLIGetStepsRemaining err=0 RemainingSteps=0 14:08:34 Filter is already there-color wheel unchanged 14:08:34 Received message from Master: op=Shutter serial=67181 14:08:34 Shutter LASER close 14:08:34 Received message from Camera: op=State serial=67183 14:08:34 GetSingleValue result=40 Value=cccccccc 14:08:34 SkyScan query 14:08:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:08:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:34 Parameters OK 14:08:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:34 Set A/D data flow result=40 14:08:34 Set A/D channel type result=40 14:08:34 Set A/D encoding result=40 14:08:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:34 Set channel filter=0.000000e+000 result=40 14:08:34 Config A/D Result=40 14:08:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:34 Get A/D filter: -9.255963e+061 result=40 14:08:34 Get A/D value=-858993460 result=40 14:08:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:34 Parameters OK 14:08:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:34 Set A/D data flow result=40 14:08:34 Set A/D channel type result=40 14:08:34 Set A/D encoding result=40 14:08:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:34 Set channel filter=0.000000e+000 result=40 14:08:34 Config A/D Result=40 14:08:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:34 Get A/D filter: -9.255963e+061 result=40 14:08:34 Get A/D value=-858993460 result=40 14:08:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:08:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:08:34 Aux= 14:08:34 Message to Camera, serial 67183 queued 14:09:11 Received message from Master: op=PointingHead serial=67196 14:09:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:09:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:09:12 Point started: ret=0 14:09:12 point_skyscan result=0 14:09:12 Check angles 14:09:12 SkyScan query 14:09:13 SkyScan query done: ret=0 az=108.765<-7251 ze=-81<-17400 Statuses=0009 0009 14:09:13 Msec=0 True Az=108.765 Ze=-81 Az status=0009 Ze status=0009 14:09:13 Check angles 14:09:13 SkyScan query 14:09:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.405<-18827 Statuses=0008 0009 14:09:14 Msec=750 True Az=112.995 Ze=-102.405 Az status=0008 Ze status=0009 14:09:14 Check angles 14:09:14 SkyScan query 14:09:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.33<-20222 Statuses=0008 0009 14:09:14 Msec=1500 True Az=112.995 Ze=-123.33 Az status=0008 Ze status=0009 14:09:15 Check angles 14:09:15 SkyScan query 14:09:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.3<-21620 Statuses=0008 0009 14:09:15 Msec=2250 True Az=112.995 Ze=-144.3 Az status=0008 Ze status=0009 14:09:15 Check angles 14:09:15 SkyScan query 14:09:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.66<-23044 Statuses=0008 0009 14:09:16 Msec=3000 True Az=112.995 Ze=-165.66 Az status=0008 Ze status=0009 14:09:16 Check angles 14:09:16 SkyScan query 14:09:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:09:17 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:09:17 Message to Master queued w/err=0: serial=67196 error=0 14:09:22 Received message from Master: op=Filter serial=67197 14:09:22 Color wheel filter change from 0 to 0 14:09:22 FLIGetFilterPos err=0 currentPosition=0 14:09:22 FLIGetStepsRemaining err=0 RemainingSteps=0 14:09:22 Filter is already there-color wheel unchanged 14:09:22 Received message from Master: op=Shutter serial=67198 14:09:22 Shutter LASER open 14:09:22 Received message from Camera: op=State serial=67200 14:09:22 GetSingleValue result=40 Value=cccccccc 14:09:22 SkyScan query 14:09:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:09:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:23 Parameters OK 14:09:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:23 Set A/D data flow result=40 14:09:23 Set A/D channel type result=40 14:09:23 Set A/D encoding result=40 14:09:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:23 Set channel filter=0.000000e+000 result=40 14:09:23 Config A/D Result=40 14:09:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:23 Get A/D filter: -9.255963e+061 result=40 14:09:23 Get A/D value=-858993460 result=40 14:09:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:23 Parameters OK 14:09:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:23 Set A/D data flow result=40 14:09:23 Set A/D channel type result=40 14:09:23 Set A/D encoding result=40 14:09:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:23 Set channel filter=0.000000e+000 result=40 14:09:23 Config A/D Result=40 14:09:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:23 Get A/D filter: -9.255963e+061 result=40 14:09:23 Get A/D value=-858993460 result=40 14:09:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:09:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:09:23 Aux= 14:09:23 Message to Camera, serial 67200 queued 14:09:31 Received message from Master: op=Shutter serial=67210 14:09:31 Shutter LASER close 14:09:32 Received message from Master: op=PointingHead serial=67214 14:09:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:09:32 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:09:32 Point started: ret=0 14:09:32 point_skyscan result=0 14:09:33 Check angles 14:09:33 SkyScan query 14:09:33 SkyScan query done: ret=0 az=89.895<-5993 ze=157.275<-1515 Statuses=0009 0009 14:09:33 Msec=0 True Az=89.895 Ze=157.275 Az status=0009 Ze status=0009 14:09:33 Check angles 14:09:33 SkyScan query 14:09:34 SkyScan query done: ret=0 az=72.51<-4834 ze=136.305<-2913 Statuses=0009 0009 14:09:34 Msec=750 True Az=72.51 Ze=136.305 Az status=0009 Ze status=0009 14:09:34 Check angles 14:09:34 SkyScan query 14:09:35 SkyScan query done: ret=0 az=54.81<-3654 ze=114.915<-4339 Statuses=0009 0009 14:09:35 Msec=1500 True Az=54.81 Ze=114.915 Az status=0009 Ze status=0009 14:09:35 Check angles 14:09:35 SkyScan query 14:09:36 SkyScan query done: ret=0 az=40.95<-2730 ze=93.54<-5764 Statuses=0009 0009 14:09:36 Msec=2250 True Az=40.95 Ze=93.54 Az status=0009 Ze status=0009 14:09:36 Check angles 14:09:36 SkyScan query 14:09:36 SkyScan query done: ret=0 az=40.995<-2733 ze=72.555<-7163 Statuses=0008 0009 14:09:36 Msec=3000 True Az=40.995 Ze=72.555 Az status=0008 Ze status=0009 14:09:37 Check angles 14:09:37 SkyScan query 14:09:37 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 14:09:37 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 14:09:37 Check angles 14:09:37 SkyScan query 14:09:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:09:38 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:09:38 Message to Master queued w/err=0: serial=67214 error=0 14:09:43 Received message from Master: op=Filter serial=67215 14:09:43 Color wheel filter change from 0 to 0 14:09:43 FLIGetFilterPos err=0 currentPosition=0 14:09:43 FLIGetStepsRemaining err=0 RemainingSteps=0 14:09:43 Filter is already there-color wheel unchanged 14:09:43 Received message from Master: op=Shutter serial=67216 14:09:43 Shutter LASER close 14:09:43 Received message from Camera: op=State serial=67218 14:09:43 GetSingleValue result=40 Value=cccccccc 14:09:43 SkyScan query 14:09:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:09:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:44 Parameters OK 14:09:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:44 Set A/D data flow result=40 14:09:44 Set A/D channel type result=40 14:09:44 Set A/D encoding result=40 14:09:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:44 Set channel filter=0.000000e+000 result=40 14:09:44 Config A/D Result=40 14:09:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:44 Get A/D filter: -9.255963e+061 result=40 14:09:44 Get A/D value=-858993460 result=40 14:09:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:44 Parameters OK 14:09:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:44 Set A/D data flow result=40 14:09:44 Set A/D channel type result=40 14:09:44 Set A/D encoding result=40 14:09:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:44 Set channel filter=0.000000e+000 result=40 14:09:44 Config A/D Result=40 14:09:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:44 Get A/D filter: -9.255963e+061 result=40 14:09:44 Get A/D value=-858993460 result=40 14:09:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:09:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:09:44 Aux= 14:09:44 Message to Camera, serial 67218 queued 14:10:21 Received message from Master: op=PointingHead serial=67231 14:10:21 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:10:21 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:10:21 Point started: ret=0 14:10:21 point_skyscan result=0 14:10:22 Check angles 14:10:22 SkyScan query 14:10:22 SkyScan query done: ret=0 az=63.75<-4250 ze=66.555<-7563 Statuses=0009 0008 14:10:22 Msec=0 True Az=63.75 Ze=66.555 Az status=0009 Ze status=0008 14:10:22 Check angles 14:10:22 SkyScan query 14:10:23 SkyScan query done: ret=0 az=81.495<-5433 ze=66.495<-7567 Statuses=0009 0008 14:10:23 Msec=750 True Az=81.495 Ze=66.495 Az status=0009 Ze status=0008 14:10:23 Check angles 14:10:23 SkyScan query 14:10:24 SkyScan query done: ret=0 az=99.075<-6605 ze=66.495<-7567 Statuses=0009 0008 14:10:24 Msec=1500 True Az=99.075 Ze=66.495 Az status=0009 Ze status=0008 14:10:24 Check angles 14:10:24 SkyScan query 14:10:24 SkyScan query done: ret=0 az=116.7<-7780 ze=66.495<-7567 Statuses=0009 0008 14:10:24 Msec=2250 True Az=116.7 Ze=66.495 Az status=0009 Ze status=0008 14:10:25 Check angles 14:10:25 SkyScan query 14:10:25 SkyScan query done: ret=0 az=134.475<-8965 ze=66.495<-7567 Statuses=0009 0008 14:10:25 Msec=3000 True Az=134.475 Ze=66.495 Az status=0009 Ze status=0008 14:10:25 Check angles 14:10:25 SkyScan query 14:10:26 SkyScan query done: ret=0 az=151.905<-10127 ze=66.495<-7567 Statuses=0009 0008 14:10:26 Msec=3750 True Az=151.905 Ze=66.495 Az status=0009 Ze status=0008 14:10:26 Check angles 14:10:26 SkyScan query 14:10:27 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 14:10:27 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 14:10:27 Message to Master queued w/err=0: serial=67231 error=0 14:10:32 Received message from Master: op=Filter serial=67232 14:10:32 Color wheel filter change from 0 to 0 14:10:32 FLIGetFilterPos err=0 currentPosition=0 14:10:32 FLIGetStepsRemaining err=0 RemainingSteps=0 14:10:32 Filter is already there-color wheel unchanged 14:10:32 Received message from Master: op=Shutter serial=67233 14:10:32 Shutter LASER close 14:10:32 Received message from Camera: op=State serial=67235 14:10:32 GetSingleValue result=40 Value=cccccccc 14:10:32 SkyScan query 14:10:33 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:10:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:33 Parameters OK 14:10:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:33 Set A/D data flow result=40 14:10:33 Set A/D channel type result=40 14:10:33 Set A/D encoding result=40 14:10:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:33 Set channel filter=0.000000e+000 result=40 14:10:33 Config A/D Result=40 14:10:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:33 Get A/D filter: -9.255963e+061 result=40 14:10:33 Get A/D value=-858993460 result=40 14:10:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:33 Parameters OK 14:10:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:33 Set A/D data flow result=40 14:10:33 Set A/D channel type result=40 14:10:33 Set A/D encoding result=40 14:10:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:33 Set channel filter=0.000000e+000 result=40 14:10:33 Config A/D Result=40 14:10:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:33 Get A/D filter: -9.255963e+061 result=40 14:10:33 Get A/D value=-858993460 result=40 14:10:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:33 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:10:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:10:33 Aux= 14:10:33 Message to Camera, serial 67235 queued 14:11:10 Received message from Master: op=PointingHead serial=67248 14:11:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:11:10 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:11:10 Point started: ret=0 14:11:10 point_skyscan result=0 14:11:11 Check angles 14:11:11 SkyScan query 14:11:11 SkyScan query done: ret=0 az=135.195<-9013 ze=36.96<-9536 Statuses=0009 0009 14:11:11 Msec=0 True Az=135.195 Ze=36.96 Az status=0009 Ze status=0009 14:11:11 Check angles 14:11:11 SkyScan query 14:11:12 SkyScan query done: ret=0 az=117.69<-7846 ze=15.99<-10934 Statuses=0009 0009 14:11:12 Msec=750 True Az=117.69 Ze=15.99 Az status=0009 Ze status=0009 14:11:12 Check angles 14:11:12 SkyScan query 14:11:13 SkyScan query done: ret=0 az=99.885<-6659 ze=-5.355<-12357 Statuses=0009 0009 14:11:13 Msec=1500 True Az=99.885 Ze=-5.355 Az status=0009 Ze status=0009 14:11:13 Check angles 14:11:13 SkyScan query 14:11:14 SkyScan query done: ret=0 az=82.44<-5496 ze=-26.28<-13752 Statuses=0009 0009 14:11:14 Msec=2250 True Az=82.44 Ze=-26.28 Az status=0009 Ze status=0009 14:11:14 Check angles 14:11:14 SkyScan query 14:11:14 SkyScan query done: ret=0 az=64.98<-4332 ze=-38.565<-14571 Statuses=0009 0008 14:11:14 Msec=3000 True Az=64.98 Ze=-38.565 Az status=0009 Ze status=0008 14:11:14 Check angles 14:11:14 SkyScan query 14:11:15 SkyScan query done: ret=0 az=47.565<-3171 ze=-38.535<-14569 Statuses=0009 0008 14:11:15 Msec=3750 True Az=47.565 Ze=-38.535 Az status=0009 Ze status=0008 14:11:15 Check angles 14:11:15 SkyScan query 14:11:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:11:16 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:11:16 Message to Master queued w/err=0: serial=67248 error=0 14:11:21 Received message from Master: op=Filter serial=67249 14:11:21 Color wheel filter change from 0 to 0 14:11:21 FLIGetFilterPos err=0 currentPosition=0 14:11:21 FLIGetStepsRemaining err=0 RemainingSteps=0 14:11:21 Filter is already there-color wheel unchanged 14:11:21 Received message from Master: op=Shutter serial=67250 14:11:21 Shutter LASER close 14:11:21 Received message from Camera: op=State serial=67252 14:11:21 GetSingleValue result=40 Value=cccccccc 14:11:21 SkyScan query 14:11:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:11:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:22 Parameters OK 14:11:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:22 Set A/D data flow result=40 14:11:22 Set A/D channel type result=40 14:11:22 Set A/D encoding result=40 14:11:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:22 Set channel filter=0.000000e+000 result=40 14:11:22 Config A/D Result=40 14:11:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:22 Get A/D filter: -9.255963e+061 result=40 14:11:22 Get A/D value=-858993460 result=40 14:11:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:22 Parameters OK 14:11:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:22 Set A/D data flow result=40 14:11:22 Set A/D channel type result=40 14:11:22 Set A/D encoding result=40 14:11:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:22 Set channel filter=0.000000e+000 result=40 14:11:22 Config A/D Result=40 14:11:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:22 Get A/D filter: -9.255963e+061 result=40 14:11:22 Get A/D value=-858993460 result=40 14:11:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:11:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:11:22 Aux= 14:11:22 Message to Camera, serial 67252 queued 14:11:58 Received message from Master: op=PointingHead serial=67265 14:11:58 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:11:58 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:11:59 Point started: ret=0 14:11:59 point_skyscan result=0 14:12:00 Check angles 14:12:00 SkyScan query 14:12:00 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.4<-16560 Statuses=0009 0009 14:12:00 Msec=0 True Az=64.215 Ze=-68.4 Az status=0009 Ze status=0009 14:12:00 Check angles 14:12:00 SkyScan query 14:12:01 SkyScan query done: ret=0 az=81.495<-5433 ze=-89.415<-17961 Statuses=0009 0009 14:12:01 Msec=750 True Az=81.495 Ze=-89.415 Az status=0009 Ze status=0009 14:12:01 Check angles 14:12:01 SkyScan query 14:12:02 SkyScan query done: ret=0 az=99.03<-6602 ze=-110.355<-19357 Statuses=0009 0009 14:12:02 Msec=1500 True Az=99.03 Ze=-110.355 Az status=0009 Ze status=0009 14:12:02 Check angles 14:12:02 SkyScan query 14:12:02 SkyScan query done: ret=0 az=116.625<-7775 ze=-131.28<-20752 Statuses=0009 0009 14:12:02 Msec=2250 True Az=116.625 Ze=-131.28 Az status=0009 Ze status=0009 14:12:03 Check angles 14:12:03 SkyScan query 14:12:03 SkyScan query done: ret=0 az=131.16<-8744 ze=-141.54<-21436 Statuses=0009 0008 14:12:03 Msec=3000 True Az=131.16 Ze=-141.54 Az status=0009 Ze status=0008 14:12:03 Check angles 14:12:03 SkyScan query 14:12:04 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:12:04 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:12:04 Message to Master queued w/err=0: serial=67265 error=0 14:12:09 Received message from Master: op=Filter serial=67266 14:12:09 Color wheel filter change from 0 to 0 14:12:09 FLIGetFilterPos err=0 currentPosition=0 14:12:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:12:09 Filter is already there-color wheel unchanged 14:12:09 Received message from Master: op=Shutter serial=67267 14:12:09 Shutter LASER close 14:12:09 Received message from Camera: op=State serial=67269 14:12:09 GetSingleValue result=40 Value=cccccccc 14:12:09 SkyScan query 14:12:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:12:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:10 Parameters OK 14:12:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:10 Set A/D data flow result=40 14:12:10 Set A/D channel type result=40 14:12:10 Set A/D encoding result=40 14:12:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:10 Set channel filter=0.000000e+000 result=40 14:12:10 Config A/D Result=40 14:12:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:10 Get A/D filter: -9.255963e+061 result=40 14:12:10 Get A/D value=-858993460 result=40 14:12:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:10 Parameters OK 14:12:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:10 Set A/D data flow result=40 14:12:10 Set A/D channel type result=40 14:12:10 Set A/D encoding result=40 14:12:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:10 Set channel filter=0.000000e+000 result=40 14:12:10 Config A/D Result=40 14:12:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:10 Get A/D filter: -9.255963e+061 result=40 14:12:10 Get A/D value=-858993460 result=40 14:12:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:10 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:12:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:12:10 Aux= 14:12:10 Message to Camera, serial 67269 queued 14:12:46 Received message from Master: op=PointingHead serial=67282 14:12:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:12:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:12:47 Point started: ret=0 14:12:47 point_skyscan result=0 14:12:48 Check angles 14:12:48 SkyScan query 14:12:48 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.135<-23409 Statuses=0009 0009 14:12:48 Msec=0 True Az=113.01 Ze=-171.135 Az status=0009 Ze status=0009 14:12:48 Check angles 14:12:48 SkyScan query 14:12:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:12:49 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:12:49 Message to Master queued w/err=0: serial=67282 error=0 14:12:54 Received message from Master: op=Filter serial=67283 14:12:54 Color wheel filter change from 0 to 0 14:12:54 FLIGetFilterPos err=0 currentPosition=0 14:12:54 FLIGetStepsRemaining err=0 RemainingSteps=0 14:12:54 Filter is already there-color wheel unchanged 14:12:54 Received message from Master: op=Shutter serial=67284 14:12:54 Shutter LASER open 14:12:54 Received message from Camera: op=State serial=67286 14:12:54 GetSingleValue result=40 Value=cccccccc 14:12:54 SkyScan query 14:12:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:12:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:55 Parameters OK 14:12:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:55 Set A/D data flow result=40 14:12:55 Set A/D channel type result=40 14:12:55 Set A/D encoding result=40 14:12:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:55 Set channel filter=0.000000e+000 result=40 14:12:55 Config A/D Result=40 14:12:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:55 Get A/D filter: -9.255963e+061 result=40 14:12:55 Get A/D value=-858993460 result=40 14:12:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:55 Parameters OK 14:12:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:55 Set A/D data flow result=40 14:12:55 Set A/D channel type result=40 14:12:55 Set A/D encoding result=40 14:12:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:55 Set channel filter=0.000000e+000 result=40 14:12:55 Config A/D Result=40 14:12:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:55 Get A/D filter: -9.255963e+061 result=40 14:12:55 Get A/D value=-858993460 result=40 14:12:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:12:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:12:55 Aux= 14:12:55 Message to Camera, serial 67286 queued 14:13:03 Received message from Master: op=Shutter serial=67296 14:13:03 Shutter LASER close 14:13:04 Received message from Master: op=PointingHead serial=67300 14:13:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:13:04 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:13:04 Point started: ret=0 14:13:04 point_skyscan result=0 14:13:05 Check angles 14:13:05 SkyScan query 14:13:06 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.49<-21566 Statuses=0009 0009 14:13:06 Msec=0 True Az=135.72 Ze=-143.49 Az status=0009 Ze status=0009 14:13:06 Check angles 14:13:06 SkyScan query 14:13:06 SkyScan query done: ret=0 az=153.18<-10212 ze=-122.535<-20169 Statuses=0009 0009 14:13:06 Msec=750 True Az=153.18 Ze=-122.535 Az status=0009 Ze status=0009 14:13:06 Check angles 14:13:06 SkyScan query 14:13:07 SkyScan query done: ret=0 az=170.535<-11369 ze=-101.64<-18776 Statuses=0009 0009 14:13:07 Msec=1500 True Az=170.535 Ze=-101.64 Az status=0009 Ze status=0009 14:13:07 Check angles 14:13:07 SkyScan query 14:13:08 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.595<-17373 Statuses=0008 0009 14:13:08 Msec=2250 True Az=176.025 Ze=-80.595 Az status=0008 Ze status=0009 14:13:08 Check angles 14:13:08 SkyScan query 14:13:09 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.685<-15979 Statuses=0008 0009 14:13:09 Msec=3000 True Az=176.01 Ze=-59.685 Az status=0008 Ze status=0009 14:13:09 Check angles 14:13:09 SkyScan query 14:13:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:13:09 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:13:09 Message to Master queued w/err=0: serial=67300 error=0 14:13:14 Received message from Master: op=Filter serial=67301 14:13:14 Color wheel filter change from 0 to 0 14:13:14 FLIGetFilterPos err=0 currentPosition=0 14:13:14 FLIGetStepsRemaining err=0 RemainingSteps=0 14:13:14 Filter is already there-color wheel unchanged 14:13:14 Received message from Master: op=Shutter serial=67302 14:13:14 Shutter LASER close 14:13:15 Received message from Camera: op=State serial=67304 14:13:15 GetSingleValue result=40 Value=cccccccc 14:13:15 SkyScan query 14:13:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:13:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:15 Parameters OK 14:13:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:15 Set A/D data flow result=40 14:13:15 Set A/D channel type result=40 14:13:15 Set A/D encoding result=40 14:13:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:15 Set channel filter=0.000000e+000 result=40 14:13:15 Config A/D Result=40 14:13:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:15 Get A/D filter: -9.255963e+061 result=40 14:13:15 Get A/D value=-858993460 result=40 14:13:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:15 Parameters OK 14:13:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:15 Set A/D data flow result=40 14:13:15 Set A/D channel type result=40 14:13:15 Set A/D encoding result=40 14:13:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:15 Set channel filter=0.000000e+000 result=40 14:13:15 Config A/D Result=40 14:13:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:15 Get A/D filter: -9.255963e+061 result=40 14:13:15 Get A/D value=-858993460 result=40 14:13:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:13:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:13:15 Aux= 14:13:15 Message to Camera, serial 67304 queued 14:13:52 Received message from Master: op=PointingHead serial=67317 14:13:52 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:13:52 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:13:52 Point started: ret=0 14:13:52 point_skyscan result=0 14:13:53 Check angles 14:13:53 SkyScan query 14:13:54 SkyScan query done: ret=0 az=152.49<-10166 ze=-21.285<-13419 Statuses=0009 0009 14:13:54 Msec=0 True Az=152.49 Ze=-21.285 Az status=0009 Ze status=0009 14:13:54 Check angles 14:13:54 SkyScan query 14:13:54 SkyScan query done: ret=0 az=135.03<-9002 ze=-0.315<-12021 Statuses=0009 0009 14:13:54 Msec=750 True Az=135.03 Ze=-0.315 Az status=0009 Ze status=0009 14:13:55 Check angles 14:13:55 SkyScan query 14:13:55 SkyScan query done: ret=0 az=117.39<-7826 ze=20.625<-10625 Statuses=0009 0009 14:13:55 Msec=1500 True Az=117.39 Ze=20.625 Az status=0009 Ze status=0009 14:13:55 Check angles 14:13:55 SkyScan query 14:13:56 SkyScan query done: ret=0 az=100.05<-6670 ze=41.61<-9226 Statuses=0009 0009 14:13:56 Msec=2250 True Az=100.05 Ze=41.61 Az status=0009 Ze status=0009 14:13:56 Check angles 14:13:56 SkyScan query 14:13:57 SkyScan query done: ret=0 az=86.07<-5738 ze=51.555<-8563 Statuses=0009 0008 14:13:57 Msec=3000 True Az=86.07 Ze=51.555 Az status=0009 Ze status=0008 14:13:57 Check angles 14:13:57 SkyScan query 14:13:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:13:57 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:13:57 Message to Master queued w/err=0: serial=67317 error=0 14:14:02 Received message from Master: op=Filter serial=67318 14:14:02 Color wheel filter change from 0 to 0 14:14:02 FLIGetFilterPos err=0 currentPosition=0 14:14:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:14:02 Filter is already there-color wheel unchanged 14:14:03 Received message from Master: op=Shutter serial=67319 14:14:03 Shutter LASER close 14:14:03 Received message from Camera: op=State serial=67321 14:14:03 GetSingleValue result=40 Value=cccccccc 14:14:03 SkyScan query 14:14:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:14:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:03 Parameters OK 14:14:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:03 Set A/D data flow result=40 14:14:03 Set A/D channel type result=40 14:14:03 Set A/D encoding result=40 14:14:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:03 Set channel filter=0.000000e+000 result=40 14:14:03 Config A/D Result=40 14:14:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:03 Get A/D filter: -9.255963e+061 result=40 14:14:03 Get A/D value=-858993460 result=40 14:14:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:03 Parameters OK 14:14:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:03 Set A/D data flow result=40 14:14:03 Set A/D channel type result=40 14:14:03 Set A/D encoding result=40 14:14:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:03 Set channel filter=0.000000e+000 result=40 14:14:03 Config A/D Result=40 14:14:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:03 Get A/D filter: -9.255963e+061 result=40 14:14:03 Get A/D value=-858993460 result=40 14:14:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:14:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:14:03 Aux= 14:14:03 Message to Camera, serial 67321 queued 14:14:40 Received message from Master: op=PointingHead serial=67334 14:14:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:14:40 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:14:40 Point started: ret=0 14:14:40 point_skyscan result=0 14:14:41 Check angles 14:14:41 SkyScan query 14:14:42 SkyScan query done: ret=0 az=109.215<-7281 ze=38.475<-9435 Statuses=0009 0008 14:14:42 Msec=0 True Az=109.215 Ze=38.475 Az status=0009 Ze status=0008 14:14:42 Check angles 14:14:42 SkyScan query 14:14:43 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 14:14:43 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 14:14:43 Check angles 14:14:43 SkyScan query 14:14:43 SkyScan query done: ret=0 az=144.105<-9607 ze=38.505<-9433 Statuses=0009 0008 14:14:43 Msec=1500 True Az=144.105 Ze=38.505 Az status=0009 Ze status=0008 14:14:44 Check angles 14:14:44 SkyScan query 14:14:44 SkyScan query done: ret=0 az=161.58<-10772 ze=38.505<-9433 Statuses=0009 0008 14:14:44 Msec=2250 True Az=161.58 Ze=38.505 Az status=0009 Ze status=0008 14:14:44 Check angles 14:14:44 SkyScan query 14:14:45 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 14:14:45 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 14:14:45 Check angles 14:14:45 SkyScan query 14:14:46 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:14:46 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:14:46 Message to Master queued w/err=0: serial=67334 error=0 14:14:51 Received message from Master: op=Filter serial=67335 14:14:51 Color wheel filter change from 0 to 0 14:14:51 FLIGetFilterPos err=0 currentPosition=0 14:14:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:14:51 Filter is already there-color wheel unchanged 14:14:51 Received message from Master: op=Shutter serial=67336 14:14:51 Shutter LASER close 14:14:51 Received message from Camera: op=State serial=67338 14:14:51 GetSingleValue result=40 Value=cccccccc 14:14:51 SkyScan query 14:14:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:14:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:51 Parameters OK 14:14:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:51 Set A/D data flow result=40 14:14:51 Set A/D channel type result=40 14:14:51 Set A/D encoding result=40 14:14:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:51 Set channel filter=0.000000e+000 result=40 14:14:51 Config A/D Result=40 14:14:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:51 Get A/D filter: -9.255963e+061 result=40 14:14:51 Get A/D value=-858993460 result=40 14:14:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:51 Parameters OK 14:14:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:51 Set A/D data flow result=40 14:14:51 Set A/D channel type result=40 14:14:51 Set A/D encoding result=40 14:14:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:51 Set channel filter=0.000000e+000 result=40 14:14:51 Config A/D Result=40 14:14:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:51 Get A/D filter: -9.255963e+061 result=40 14:14:51 Get A/D value=-858993460 result=40 14:14:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:14:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:14:51 Aux= 14:14:51 Message to Camera, serial 67338 queued 14:15:28 Received message from Master: op=PointingHead serial=67351 14:15:28 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:15:28 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:15:29 Point started: ret=0 14:15:29 point_skyscan result=0 14:15:29 Received message from Master: op=Identify serial=67352 14:15:29 Check angles 14:15:29 SkyScan query 14:15:30 SkyScan query done: ret=0 az=152.955<-10197 ze=8.775<-11415 Statuses=0009 0009 14:15:30 Msec=0 True Az=152.955 Ze=8.775 Az status=0009 Ze status=0009 14:15:30 Check angles 14:15:30 SkyScan query 14:15:31 SkyScan query done: ret=0 az=135.18<-9012 ze=-12.6<-12840 Statuses=0009 0009 14:15:31 Msec=750 True Az=135.18 Ze=-12.6 Az status=0009 Ze status=0009 14:15:31 Check angles 14:15:31 SkyScan query 14:15:31 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.555<-14237 Statuses=0009 0009 14:15:31 Msec=1500 True Az=117.54 Ze=-33.555 Az status=0009 Ze status=0009 14:15:32 Check angles 14:15:32 SkyScan query 14:15:32 SkyScan query done: ret=0 az=100.155<-6677 ze=-51.555<-15437 Statuses=0009 0009 14:15:32 Msec=2250 True Az=100.155 Ze=-51.555 Az status=0009 Ze status=0009 14:15:32 Check angles 14:15:32 SkyScan query 14:15:33 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 14:15:33 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 14:15:33 Check angles 14:15:33 SkyScan query 14:15:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:15:34 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:15:34 Message to Master queued w/err=0: serial=67351 error=0 14:15:39 Received message from Master: op=Filter serial=67355 14:15:39 Color wheel filter change from 0 to 0 14:15:39 FLIGetFilterPos err=0 currentPosition=0 14:15:39 FLIGetStepsRemaining err=0 RemainingSteps=0 14:15:39 Filter is already there-color wheel unchanged 14:15:39 Received message from Master: op=Shutter serial=67356 14:15:39 Shutter LASER close 14:15:39 Received message from Camera: op=State serial=67358 14:15:39 GetSingleValue result=40 Value=cccccccc 14:15:39 SkyScan query 14:15:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:15:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:39 Parameters OK 14:15:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:39 Set A/D data flow result=40 14:15:39 Set A/D channel type result=40 14:15:39 Set A/D encoding result=40 14:15:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:39 Set channel filter=0.000000e+000 result=40 14:15:39 Config A/D Result=40 14:15:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:39 Get A/D filter: -9.255963e+061 result=40 14:15:39 Get A/D value=-858993460 result=40 14:15:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:39 Parameters OK 14:15:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:39 Set A/D data flow result=40 14:15:39 Set A/D channel type result=40 14:15:39 Set A/D encoding result=40 14:15:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:39 Set channel filter=0.000000e+000 result=40 14:15:39 Config A/D Result=40 14:15:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:39 Get A/D filter: -9.255963e+061 result=40 14:15:39 Get A/D value=-858993460 result=40 14:15:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:15:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:15:39 Aux= 14:15:39 Message to Camera, serial 67358 queued [UTC 2018-12-11 14:15:54] 14:16:16 Received message from Master: op=PointingHead serial=67371 14:16:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:16:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:16:17 Point started: ret=0 14:16:17 point_skyscan result=0 14:16:17 Check angles 14:16:17 SkyScan query 14:16:18 SkyScan query done: ret=0 az=108.765<-7251 ze=-81.06<-17404 Statuses=0009 0009 14:16:18 Msec=0 True Az=108.765 Ze=-81.06 Az status=0009 Ze status=0009 14:16:18 Check angles 14:16:18 SkyScan query 14:16:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.435<-18829 Statuses=0008 0009 14:16:19 Msec=750 True Az=112.995 Ze=-102.435 Az status=0008 Ze status=0009 14:16:19 Check angles 14:16:19 SkyScan query 14:16:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.39<-20226 Statuses=0008 0009 14:16:19 Msec=1500 True Az=112.995 Ze=-123.39 Az status=0008 Ze status=0009 14:16:20 Check angles 14:16:20 SkyScan query 14:16:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.345<-21623 Statuses=0008 0009 14:16:20 Msec=2250 True Az=112.995 Ze=-144.345 Az status=0008 Ze status=0009 14:16:20 Check angles 14:16:20 SkyScan query 14:16:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.3<-23020 Statuses=0008 0009 14:16:21 Msec=3000 True Az=112.995 Ze=-165.3 Az status=0008 Ze status=0009 14:16:21 Check angles 14:16:21 SkyScan query 14:16:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:16:22 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:16:22 Message to Master queued w/err=0: serial=67371 error=0 14:16:27 Received message from Master: op=Filter serial=67372 14:16:27 Color wheel filter change from 0 to 0 14:16:27 FLIGetFilterPos err=0 currentPosition=0 14:16:27 FLIGetStepsRemaining err=0 RemainingSteps=0 14:16:27 Filter is already there-color wheel unchanged 14:16:27 Received message from Master: op=Shutter serial=67373 14:16:27 Shutter LASER open 14:16:27 Received message from Camera: op=State serial=67375 14:16:27 GetSingleValue result=40 Value=cccccccc 14:16:27 SkyScan query 14:16:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:16:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:28 Parameters OK 14:16:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:28 Set A/D data flow result=40 14:16:28 Set A/D channel type result=40 14:16:28 Set A/D encoding result=40 14:16:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:28 Set channel filter=0.000000e+000 result=40 14:16:28 Config A/D Result=40 14:16:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:28 Get A/D filter: -9.255963e+061 result=40 14:16:28 Get A/D value=-858993460 result=40 14:16:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:28 Parameters OK 14:16:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:28 Set A/D data flow result=40 14:16:28 Set A/D channel type result=40 14:16:28 Set A/D encoding result=40 14:16:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:28 Set channel filter=0.000000e+000 result=40 14:16:28 Config A/D Result=40 14:16:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:28 Get A/D filter: -9.255963e+061 result=40 14:16:28 Get A/D value=-858993460 result=40 14:16:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:16:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:16:28 Aux= 14:16:28 Message to Camera, serial 67375 queued 14:16:36 Received message from Master: op=Shutter serial=67385 14:16:36 Shutter LASER close 14:16:37 Received message from Master: op=PointingHead serial=67389 14:16:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:16:37 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:16:37 Point started: ret=0 14:16:37 point_skyscan result=0 14:16:38 Check angles 14:16:38 SkyScan query 14:16:38 SkyScan query done: ret=0 az=89.895<-5993 ze=157.23<-1518 Statuses=0009 0009 14:16:38 Msec=0 True Az=89.895 Ze=157.23 Az status=0009 Ze status=0009 14:16:38 Check angles 14:16:38 SkyScan query 14:16:39 SkyScan query done: ret=0 az=71.985<-4799 ze=135.81<-2946 Statuses=0009 0009 14:16:39 Msec=750 True Az=71.985 Ze=135.81 Az status=0009 Ze status=0009 14:16:39 Check angles 14:16:39 SkyScan query 14:16:40 SkyScan query done: ret=0 az=54.45<-3630 ze=114.405<-4373 Statuses=0009 0009 14:16:40 Msec=1500 True Az=54.45 Ze=114.405 Az status=0009 Ze status=0009 14:16:40 Check angles 14:16:40 SkyScan query 14:16:41 SkyScan query done: ret=0 az=41.01<-2734 ze=93.06<-5796 Statuses=0009 0009 14:16:41 Msec=2250 True Az=41.01 Ze=93.06 Az status=0009 Ze status=0009 14:16:41 Check angles 14:16:41 SkyScan query 14:16:41 SkyScan query done: ret=0 az=40.995<-2733 ze=72.075<-7195 Statuses=0008 0009 14:16:41 Msec=3000 True Az=40.995 Ze=72.075 Az status=0008 Ze status=0009 14:16:41 Check angles 14:16:41 SkyScan query 14:16:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.095<-8527 Statuses=0008 0009 14:16:42 Msec=3750 True Az=40.995 Ze=52.095 Az status=0008 Ze status=0009 14:16:42 Check angles 14:16:42 SkyScan query 14:16:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:16:43 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:16:43 Message to Master queued w/err=0: serial=67389 error=0 14:16:48 Received message from Master: op=Filter serial=67390 14:16:48 Color wheel filter change from 0 to 0 14:16:48 FLIGetFilterPos err=0 currentPosition=0 14:16:48 FLIGetStepsRemaining err=0 RemainingSteps=0 14:16:48 Filter is already there-color wheel unchanged 14:16:48 Received message from Master: op=Shutter serial=67391 14:16:48 Shutter LASER close 14:16:48 Received message from Camera: op=State serial=67393 14:16:48 GetSingleValue result=40 Value=cccccccc 14:16:48 SkyScan query 14:16:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:16:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:49 Parameters OK 14:16:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:49 Set A/D data flow result=40 14:16:49 Set A/D channel type result=40 14:16:49 Set A/D encoding result=40 14:16:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:49 Set channel filter=0.000000e+000 result=40 14:16:49 Config A/D Result=40 14:16:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:49 Get A/D filter: -9.255963e+061 result=40 14:16:49 Get A/D value=-858993460 result=40 14:16:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:49 Parameters OK 14:16:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:49 Set A/D data flow result=40 14:16:49 Set A/D channel type result=40 14:16:49 Set A/D encoding result=40 14:16:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:49 Set channel filter=0.000000e+000 result=40 14:16:49 Config A/D Result=40 14:16:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:49 Get A/D filter: -9.255963e+061 result=40 14:16:49 Get A/D value=-858993460 result=40 14:16:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:16:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:16:49 Aux= 14:16:49 Message to Camera, serial 67393 queued 14:17:26 Received message from Master: op=PointingHead serial=67406 14:17:26 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:17:26 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:17:26 Point started: ret=0 14:17:26 point_skyscan result=0 14:17:27 Check angles 14:17:27 SkyScan query 14:17:27 SkyScan query done: ret=0 az=63.885<-4259 ze=66.555<-7563 Statuses=0009 0008 14:17:27 Msec=0 True Az=63.885 Ze=66.555 Az status=0009 Ze status=0008 14:17:27 Check angles 14:17:27 SkyScan query 14:17:28 SkyScan query done: ret=0 az=81.21<-5414 ze=66.51<-7566 Statuses=0009 0008 14:17:28 Msec=750 True Az=81.21 Ze=66.51 Az status=0009 Ze status=0008 14:17:28 Check angles 14:17:28 SkyScan query 14:17:29 SkyScan query done: ret=0 az=99.225<-6615 ze=66.495<-7567 Statuses=0009 0008 14:17:29 Msec=1500 True Az=99.225 Ze=66.495 Az status=0009 Ze status=0008 14:17:29 Check angles 14:17:29 SkyScan query 14:17:29 SkyScan query done: ret=0 az=116.775<-7785 ze=66.495<-7567 Statuses=0009 0008 14:17:29 Msec=2250 True Az=116.775 Ze=66.495 Az status=0009 Ze status=0008 14:17:30 Check angles 14:17:30 SkyScan query 14:17:30 SkyScan query done: ret=0 az=134.235<-8949 ze=66.495<-7567 Statuses=0009 0008 14:17:30 Msec=3000 True Az=134.235 Ze=66.495 Az status=0009 Ze status=0008 14:17:30 Check angles 14:17:30 SkyScan query 14:17:31 SkyScan query done: ret=0 az=151.635<-10109 ze=66.495<-7567 Statuses=0009 0008 14:17:31 Msec=3750 True Az=151.635 Ze=66.495 Az status=0009 Ze status=0008 14:17:31 Check angles 14:17:31 SkyScan query 14:17:32 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:17:32 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 14:17:32 Message to Master queued w/err=0: serial=67406 error=0 14:17:37 Received message from Master: op=Filter serial=67407 14:17:37 Color wheel filter change from 0 to 0 14:17:37 FLIGetFilterPos err=0 currentPosition=0 14:17:37 FLIGetStepsRemaining err=0 RemainingSteps=0 14:17:37 Filter is already there-color wheel unchanged 14:17:37 Received message from Master: op=Shutter serial=67408 14:17:37 Shutter LASER close 14:17:37 Received message from Camera: op=State serial=67410 14:17:37 GetSingleValue result=40 Value=cccccccc 14:17:37 SkyScan query 14:17:38 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:17:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:38 Parameters OK 14:17:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:38 Set A/D data flow result=40 14:17:38 Set A/D channel type result=40 14:17:38 Set A/D encoding result=40 14:17:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:38 Set channel filter=0.000000e+000 result=40 14:17:38 Config A/D Result=40 14:17:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:38 Get A/D filter: -9.255963e+061 result=40 14:17:38 Get A/D value=-858993460 result=40 14:17:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:38 Parameters OK 14:17:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:38 Set A/D data flow result=40 14:17:38 Set A/D channel type result=40 14:17:38 Set A/D encoding result=40 14:17:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:38 Set channel filter=0.000000e+000 result=40 14:17:38 Config A/D Result=40 14:17:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:38 Get A/D filter: -9.255963e+061 result=40 14:17:38 Get A/D value=-858993460 result=40 14:17:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:38 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:17:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:17:38 Aux= 14:17:38 Message to Camera, serial 67410 queued 14:18:14 Received message from Master: op=PointingHead serial=67423 14:18:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:18:14 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:18:15 Point started: ret=0 14:18:15 point_skyscan result=0 14:18:16 Check angles 14:18:16 SkyScan query 14:18:16 SkyScan query done: ret=0 az=134.775<-8985 ze=36.42<-9572 Statuses=0009 0009 14:18:16 Msec=0 True Az=134.775 Ze=36.42 Az status=0009 Ze status=0009 14:18:16 Check angles 14:18:16 SkyScan query 14:18:17 SkyScan query done: ret=0 az=116.91<-7794 ze=15.075<-10995 Statuses=0009 0009 14:18:17 Msec=750 True Az=116.91 Ze=15.075 Az status=0009 Ze status=0009 14:18:17 Check angles 14:18:17 SkyScan query 14:18:18 SkyScan query done: ret=0 az=99.465<-6631 ze=-5.895<-12393 Statuses=0009 0009 14:18:18 Msec=1500 True Az=99.465 Ze=-5.895 Az status=0009 Ze status=0009 14:18:18 Check angles 14:18:18 SkyScan query 14:18:18 SkyScan query done: ret=0 az=82.08<-5472 ze=-26.85<-13790 Statuses=0009 0009 14:18:18 Msec=2250 True Az=82.08 Ze=-26.85 Az status=0009 Ze status=0009 14:18:19 Check angles 14:18:19 SkyScan query 14:18:19 SkyScan query done: ret=0 az=64.53<-4302 ze=-38.565<-14571 Statuses=0009 0008 14:18:19 Msec=3000 True Az=64.53 Ze=-38.565 Az status=0009 Ze status=0008 14:18:19 Check angles 14:18:19 SkyScan query 14:18:20 SkyScan query done: ret=0 az=46.74<-3116 ze=-38.52<-14568 Statuses=0009 0008 14:18:20 Msec=3750 True Az=46.74 Ze=-38.52 Az status=0009 Ze status=0008 14:18:20 Check angles 14:18:20 SkyScan query 14:18:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:18:21 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:18:21 Message to Master queued w/err=0: serial=67423 error=0 14:18:26 Received message from Master: op=Filter serial=67424 14:18:26 Color wheel filter change from 0 to 0 14:18:26 FLIGetFilterPos err=0 currentPosition=0 14:18:26 FLIGetStepsRemaining err=0 RemainingSteps=0 14:18:26 Filter is already there-color wheel unchanged 14:18:26 Received message from Master: op=Shutter serial=67425 14:18:26 Shutter LASER close 14:18:26 Received message from Camera: op=State serial=67427 14:18:26 GetSingleValue result=40 Value=cccccccc 14:18:26 SkyScan query 14:18:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:18:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:26 Parameters OK 14:18:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:26 Set A/D data flow result=40 14:18:26 Set A/D channel type result=40 14:18:26 Set A/D encoding result=40 14:18:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:26 Set channel filter=0.000000e+000 result=40 14:18:26 Config A/D Result=40 14:18:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:26 Get A/D filter: -9.255963e+061 result=40 14:18:26 Get A/D value=-858993460 result=40 14:18:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:26 Parameters OK 14:18:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:26 Set A/D data flow result=40 14:18:26 Set A/D channel type result=40 14:18:26 Set A/D encoding result=40 14:18:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:26 Set channel filter=0.000000e+000 result=40 14:18:26 Config A/D Result=40 14:18:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:26 Get A/D filter: -9.255963e+061 result=40 14:18:26 Get A/D value=-858993460 result=40 14:18:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:18:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:18:26 Aux= 14:18:26 Message to Camera, serial 67427 queued 14:19:03 Received message from Master: op=PointingHead serial=67440 14:19:03 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:19:03 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:19:04 Point started: ret=0 14:19:04 point_skyscan result=0 14:19:04 Check angles 14:19:04 SkyScan query 14:19:05 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.655<-16577 Statuses=0009 0009 14:19:05 Msec=0 True Az=64.425 Ze=-68.655 Az status=0009 Ze status=0009 14:19:05 Check angles 14:19:05 SkyScan query 14:19:06 SkyScan query done: ret=0 az=81.69<-5446 ze=-89.625<-17975 Statuses=0009 0009 14:19:06 Msec=750 True Az=81.69 Ze=-89.625 Az status=0009 Ze status=0009 14:19:06 Check angles 14:19:06 SkyScan query 14:19:06 SkyScan query done: ret=0 az=99.345<-6623 ze=-110.595<-19373 Statuses=0009 0009 14:19:06 Msec=1500 True Az=99.345 Ze=-110.595 Az status=0009 Ze status=0009 14:19:07 Check angles 14:19:07 SkyScan query 14:19:07 SkyScan query done: ret=0 az=116.925<-7795 ze=-131.52<-20768 Statuses=0009 0009 14:19:07 Msec=2250 True Az=116.925 Ze=-131.52 Az status=0009 Ze status=0009 14:19:07 Check angles 14:19:07 SkyScan query 14:19:08 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 14:19:08 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 14:19:08 Check angles 14:19:08 SkyScan query 14:19:09 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:19:09 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:19:09 Message to Master queued w/err=0: serial=67440 error=0 14:19:14 Received message from Master: op=Filter serial=67441 14:19:14 Color wheel filter change from 0 to 0 14:19:14 FLIGetFilterPos err=0 currentPosition=0 14:19:14 FLIGetStepsRemaining err=0 RemainingSteps=0 14:19:14 Filter is already there-color wheel unchanged 14:19:14 Received message from Master: op=Shutter serial=67442 14:19:14 Shutter LASER close 14:19:14 Received message from Camera: op=State serial=67444 14:19:14 GetSingleValue result=40 Value=cccccccc 14:19:14 SkyScan query 14:19:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:19:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:15 Parameters OK 14:19:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:15 Set A/D data flow result=40 14:19:15 Set A/D channel type result=40 14:19:15 Set A/D encoding result=40 14:19:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:15 Set channel filter=0.000000e+000 result=40 14:19:15 Config A/D Result=40 14:19:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:15 Get A/D filter: -9.255963e+061 result=40 14:19:15 Get A/D value=-858993460 result=40 14:19:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:15 Parameters OK 14:19:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:15 Set A/D data flow result=40 14:19:15 Set A/D channel type result=40 14:19:15 Set A/D encoding result=40 14:19:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:15 Set channel filter=0.000000e+000 result=40 14:19:15 Config A/D Result=40 14:19:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:15 Get A/D filter: -9.255963e+061 result=40 14:19:15 Get A/D value=-858993460 result=40 14:19:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:15 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:19:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:19:15 Aux= 14:19:15 Message to Camera, serial 67444 queued 14:19:50 Received message from Master: op=PointingHead serial=67456 14:19:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:19:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:19:51 Point started: ret=0 14:19:51 point_skyscan result=0 14:19:52 Check angles 14:19:52 SkyScan query 14:19:52 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.15<-23410 Statuses=0009 0009 14:19:52 Msec=0 True Az=113.01 Ze=-171.15 Az status=0009 Ze status=0009 14:19:52 Check angles 14:19:52 SkyScan query 14:19:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:19:53 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:19:53 Message to Master queued w/err=0: serial=67456 error=0 14:19:58 Received message from Master: op=Filter serial=67457 14:19:58 Color wheel filter change from 0 to 0 14:19:58 FLIGetFilterPos err=0 currentPosition=0 14:19:58 FLIGetStepsRemaining err=0 RemainingSteps=0 14:19:58 Filter is already there-color wheel unchanged 14:19:58 Received message from Master: op=Shutter serial=67458 14:19:58 Shutter LASER open 14:19:58 Received message from Camera: op=State serial=67460 14:19:58 GetSingleValue result=40 Value=cccccccc 14:19:58 SkyScan query 14:19:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:19:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:59 Parameters OK 14:19:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:59 Set A/D data flow result=40 14:19:59 Set A/D channel type result=40 14:19:59 Set A/D encoding result=40 14:19:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:59 Set channel filter=0.000000e+000 result=40 14:19:59 Config A/D Result=40 14:19:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:59 Get A/D filter: -9.255963e+061 result=40 14:19:59 Get A/D value=-858993460 result=40 14:19:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:59 Parameters OK 14:19:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:59 Set A/D data flow result=40 14:19:59 Set A/D channel type result=40 14:19:59 Set A/D encoding result=40 14:19:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:59 Set channel filter=0.000000e+000 result=40 14:19:59 Config A/D Result=40 14:19:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:59 Get A/D filter: -9.255963e+061 result=40 14:19:59 Get A/D value=-858993460 result=40 14:19:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:19:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:19:59 Aux= 14:19:59 Message to Camera, serial 67460 queued 14:20:07 Received message from Master: op=Shutter serial=67470 14:20:07 Shutter LASER close 14:20:08 Received message from Master: op=PointingHead serial=67474 14:20:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:20:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:20:08 Point started: ret=0 14:20:08 point_skyscan result=0 14:20:09 Check angles 14:20:09 SkyScan query 14:20:09 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.055<-21537 Statuses=0009 0009 14:20:09 Msec=0 True Az=136.155 Ze=-143.055 Az status=0009 Ze status=0009 14:20:10 Check angles 14:20:10 SkyScan query 14:20:10 SkyScan query done: ret=0 az=154.035<-10269 ze=-121.665<-20111 Statuses=0009 0009 14:20:10 Msec=750 True Az=154.035 Ze=-121.665 Az status=0009 Ze status=0009 14:20:10 Check angles 14:20:10 SkyScan query 14:20:11 SkyScan query done: ret=0 az=171.42<-11428 ze=-100.635<-18709 Statuses=0009 0009 14:20:11 Msec=1500 True Az=171.42 Ze=-100.635 Az status=0009 Ze status=0009 14:20:11 Check angles 14:20:11 SkyScan query 14:20:12 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.77<-17318 Statuses=0008 0009 14:20:12 Msec=2250 True Az=176.025 Ze=-79.77 Az status=0008 Ze status=0009 14:20:12 Check angles 14:20:12 SkyScan query 14:20:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.74<-15916 Statuses=0008 0009 14:20:13 Msec=3000 True Az=176.01 Ze=-58.74 Az status=0008 Ze status=0009 14:20:13 Check angles 14:20:13 SkyScan query 14:20:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:20:13 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:20:13 Message to Master queued w/err=0: serial=67474 error=0 14:20:18 Received message from Master: op=Filter serial=67475 14:20:18 Color wheel filter change from 0 to 0 14:20:18 FLIGetFilterPos err=0 currentPosition=0 14:20:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:20:18 Filter is already there-color wheel unchanged 14:20:18 Received message from Master: op=Shutter serial=67476 14:20:18 Shutter LASER close 14:20:19 Received message from Camera: op=State serial=67478 14:20:19 GetSingleValue result=40 Value=cccccccc 14:20:19 SkyScan query 14:20:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:20:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:19 Parameters OK 14:20:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:19 Set A/D data flow result=40 14:20:19 Set A/D channel type result=40 14:20:19 Set A/D encoding result=40 14:20:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:19 Set channel filter=0.000000e+000 result=40 14:20:19 Config A/D Result=40 14:20:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:19 Get A/D filter: -9.255963e+061 result=40 14:20:19 Get A/D value=-858993460 result=40 14:20:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:19 Parameters OK 14:20:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:19 Set A/D data flow result=40 14:20:19 Set A/D channel type result=40 14:20:19 Set A/D encoding result=40 14:20:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:19 Set channel filter=0.000000e+000 result=40 14:20:19 Config A/D Result=40 14:20:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:19 Get A/D filter: -9.255963e+061 result=40 14:20:19 Get A/D value=-858993460 result=40 14:20:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:20:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:20:19 Aux= 14:20:19 Message to Camera, serial 67478 queued 14:20:56 Received message from Master: op=PointingHead serial=67491 14:20:56 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:20:56 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:20:56 Point started: ret=0 14:20:56 point_skyscan result=0 14:20:57 Check angles 14:20:57 SkyScan query 14:20:58 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.765<-13451 Statuses=0009 0009 14:20:58 Msec=0 True Az=152.94 Ze=-21.765 Az status=0009 Ze status=0009 14:20:58 Check angles 14:20:58 SkyScan query 14:20:58 SkyScan query done: ret=0 az=135.525<-9035 ze=-0.75<-12050 Statuses=0009 0009 14:20:58 Msec=750 True Az=135.525 Ze=-0.75 Az status=0009 Ze status=0009 14:20:59 Check angles 14:20:59 SkyScan query 14:20:59 SkyScan query done: ret=0 az=117.78<-7852 ze=20.16<-10656 Statuses=0009 0009 14:20:59 Msec=1500 True Az=117.78 Ze=20.16 Az status=0009 Ze status=0009 14:20:59 Check angles 14:20:59 SkyScan query 14:21:00 SkyScan query done: ret=0 az=100.32<-6688 ze=41.13<-9258 Statuses=0009 0009 14:21:00 Msec=2250 True Az=100.32 Ze=41.13 Az status=0009 Ze status=0009 14:21:00 Check angles 14:21:00 SkyScan query 14:21:01 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 14:21:01 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 14:21:01 Check angles 14:21:01 SkyScan query 14:21:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:21:01 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:21:01 Message to Master queued w/err=0: serial=67491 error=0 14:21:06 Received message from Master: op=Filter serial=67492 14:21:06 Color wheel filter change from 0 to 0 14:21:06 FLIGetFilterPos err=0 currentPosition=0 14:21:06 FLIGetStepsRemaining err=0 RemainingSteps=0 14:21:06 Filter is already there-color wheel unchanged 14:21:07 Received message from Master: op=Shutter serial=67493 14:21:07 Shutter LASER close 14:21:07 Received message from Camera: op=State serial=67495 14:21:07 GetSingleValue result=40 Value=cccccccc 14:21:07 SkyScan query 14:21:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:21:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:07 Parameters OK 14:21:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:07 Set A/D data flow result=40 14:21:07 Set A/D channel type result=40 14:21:07 Set A/D encoding result=40 14:21:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:07 Set channel filter=0.000000e+000 result=40 14:21:07 Config A/D Result=40 14:21:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:07 Get A/D filter: -9.255963e+061 result=40 14:21:07 Get A/D value=-858993460 result=40 14:21:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:07 Parameters OK 14:21:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:07 Set A/D data flow result=40 14:21:07 Set A/D channel type result=40 14:21:07 Set A/D encoding result=40 14:21:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:07 Set channel filter=0.000000e+000 result=40 14:21:07 Config A/D Result=40 14:21:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:07 Get A/D filter: -9.255963e+061 result=40 14:21:07 Get A/D value=-858993460 result=40 14:21:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:21:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:21:07 Aux= 14:21:07 Message to Camera, serial 67495 queued 14:21:44 Received message from Master: op=PointingHead serial=67508 14:21:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:21:44 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:21:44 Point started: ret=0 14:21:44 point_skyscan result=0 14:21:45 Check angles 14:21:45 SkyScan query 14:21:46 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 14:21:46 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 14:21:46 Check angles 14:21:46 SkyScan query 14:21:46 SkyScan query done: ret=0 az=126.66<-8444 ze=38.505<-9433 Statuses=0009 0008 14:21:46 Msec=750 True Az=126.66 Ze=38.505 Az status=0009 Ze status=0008 14:21:47 Check angles 14:21:47 SkyScan query 14:21:47 SkyScan query done: ret=0 az=144.465<-9631 ze=38.505<-9433 Statuses=0009 0008 14:21:47 Msec=1500 True Az=144.465 Ze=38.505 Az status=0009 Ze status=0008 14:21:47 Check angles 14:21:47 SkyScan query 14:21:48 SkyScan query done: ret=0 az=162.255<-10817 ze=38.505<-9433 Statuses=0009 0008 14:21:48 Msec=2250 True Az=162.255 Ze=38.505 Az status=0009 Ze status=0008 14:21:48 Check angles 14:21:48 SkyScan query 14:21:49 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:21:49 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:21:49 Check angles 14:21:49 SkyScan query 14:21:50 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:21:50 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:21:50 Message to Master queued w/err=0: serial=67508 error=0 14:21:55 Received message from Master: op=Filter serial=67509 14:21:55 Color wheel filter change from 0 to 0 14:21:55 FLIGetFilterPos err=0 currentPosition=0 14:21:55 FLIGetStepsRemaining err=0 RemainingSteps=0 14:21:55 Filter is already there-color wheel unchanged 14:21:55 Received message from Master: op=Shutter serial=67510 14:21:55 Shutter LASER close 14:21:55 Received message from Camera: op=State serial=67512 14:21:55 GetSingleValue result=40 Value=cccccccc 14:21:55 SkyScan query 14:21:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:21:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:55 Parameters OK 14:21:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:55 Set A/D data flow result=40 14:21:55 Set A/D channel type result=40 14:21:55 Set A/D encoding result=40 14:21:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:55 Set channel filter=0.000000e+000 result=40 14:21:55 Config A/D Result=40 14:21:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:55 Get A/D filter: -9.255963e+061 result=40 14:21:55 Get A/D value=-858993460 result=40 14:21:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:55 Parameters OK 14:21:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:55 Set A/D data flow result=40 14:21:55 Set A/D channel type result=40 14:21:55 Set A/D encoding result=40 14:21:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:55 Set channel filter=0.000000e+000 result=40 14:21:55 Config A/D Result=40 14:21:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:55 Get A/D filter: -9.255963e+061 result=40 14:21:55 Get A/D value=-858993460 result=40 14:21:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:21:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:21:55 Aux= 14:21:55 Message to Camera, serial 67512 queued 14:22:32 Received message from Master: op=PointingHead serial=67525 14:22:32 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:22:32 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:22:32 Point started: ret=0 14:22:32 point_skyscan result=0 14:22:33 Check angles 14:22:33 SkyScan query 14:22:34 SkyScan query done: ret=0 az=152.955<-10197 ze=8.58<-11428 Statuses=0009 0009 14:22:34 Msec=0 True Az=152.955 Ze=8.58 Az status=0009 Ze status=0009 14:22:34 Check angles 14:22:34 SkyScan query 14:22:35 SkyScan query done: ret=0 az=135.54<-9036 ze=-12.375<-12825 Statuses=0009 0009 14:22:35 Msec=750 True Az=135.54 Ze=-12.375 Az status=0009 Ze status=0009 14:22:35 Check angles 14:22:35 SkyScan query 14:22:35 SkyScan query done: ret=0 az=117.855<-7857 ze=-33.285<-14219 Statuses=0009 0009 14:22:35 Msec=1500 True Az=117.855 Ze=-33.285 Az status=0009 Ze status=0009 14:22:35 Check angles 14:22:35 SkyScan query 14:22:36 SkyScan query done: ret=0 az=100.185<-6679 ze=-51.57<-15438 Statuses=0009 0009 14:22:36 Msec=2250 True Az=100.185 Ze=-51.57 Az status=0009 Ze status=0009 14:22:36 Check angles 14:22:36 SkyScan query 14:22:37 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 14:22:37 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 14:22:37 Check angles 14:22:37 SkyScan query 14:22:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:22:38 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:22:38 Message to Master queued w/err=0: serial=67525 error=0 14:22:43 Received message from Master: op=Filter serial=67526 14:22:43 Color wheel filter change from 0 to 0 14:22:43 FLIGetFilterPos err=0 currentPosition=0 14:22:43 FLIGetStepsRemaining err=0 RemainingSteps=0 14:22:43 Filter is already there-color wheel unchanged 14:22:43 Received message from Master: op=Shutter serial=67527 14:22:43 Shutter LASER close 14:22:43 Received message from Camera: op=State serial=67529 14:22:43 GetSingleValue result=40 Value=cccccccc 14:22:43 SkyScan query 14:22:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:22:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:43 Parameters OK 14:22:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:43 Set A/D data flow result=40 14:22:43 Set A/D channel type result=40 14:22:43 Set A/D encoding result=40 14:22:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:43 Set channel filter=0.000000e+000 result=40 14:22:43 Config A/D Result=40 14:22:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:43 Get A/D filter: -9.255963e+061 result=40 14:22:43 Get A/D value=-858993460 result=40 14:22:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:43 Parameters OK 14:22:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:43 Set A/D data flow result=40 14:22:43 Set A/D channel type result=40 14:22:43 Set A/D encoding result=40 14:22:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:43 Set channel filter=0.000000e+000 result=40 14:22:43 Config A/D Result=40 14:22:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:43 Get A/D filter: -9.255963e+061 result=40 14:22:43 Get A/D value=-858993460 result=40 14:22:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:22:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:22:43 Aux= 14:22:43 Message to Camera, serial 67529 queued 14:23:20 Received message from Master: op=PointingHead serial=67542 14:23:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:23:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:23:21 Point started: ret=0 14:23:21 point_skyscan result=0 14:23:21 Check angles 14:23:21 SkyScan query 14:23:22 SkyScan query done: ret=0 az=109.035<-7269 ze=-81.345<-17423 Statuses=0009 0009 14:23:22 Msec=0 True Az=109.035 Ze=-81.345 Az status=0009 Ze status=0009 14:23:22 Check angles 14:23:22 SkyScan query 14:23:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.75<-18850 Statuses=0008 0009 14:23:23 Msec=750 True Az=112.995 Ze=-102.75 Az status=0008 Ze status=0009 14:23:23 Check angles 14:23:23 SkyScan query 14:23:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.14<-20276 Statuses=0008 0009 14:23:23 Msec=1500 True Az=112.995 Ze=-124.14 Az status=0008 Ze status=0009 14:23:24 Check angles 14:23:24 SkyScan query 14:23:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.065<-21671 Statuses=0008 0009 14:23:24 Msec=2250 True Az=112.995 Ze=-145.065 Az status=0008 Ze status=0009 14:23:24 Check angles 14:23:24 SkyScan query 14:23:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.02<-23068 Statuses=0008 0009 14:23:25 Msec=3000 True Az=112.995 Ze=-166.02 Az status=0008 Ze status=0009 14:23:25 Check angles 14:23:25 SkyScan query 14:23:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:23:26 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:23:26 Message to Master queued w/err=0: serial=67542 error=0 14:23:31 Received message from Master: op=Filter serial=67543 14:23:31 Color wheel filter change from 0 to 0 14:23:31 FLIGetFilterPos err=0 currentPosition=0 14:23:31 FLIGetStepsRemaining err=0 RemainingSteps=0 14:23:31 Filter is already there-color wheel unchanged 14:23:31 Received message from Master: op=Shutter serial=67544 14:23:31 Shutter LASER open 14:23:31 Received message from Camera: op=State serial=67546 14:23:31 GetSingleValue result=40 Value=cccccccc 14:23:31 SkyScan query 14:23:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:23:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:32 Parameters OK 14:23:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:32 Set A/D data flow result=40 14:23:32 Set A/D channel type result=40 14:23:32 Set A/D encoding result=40 14:23:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:32 Set channel filter=0.000000e+000 result=40 14:23:32 Config A/D Result=40 14:23:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:32 Get A/D filter: -9.255963e+061 result=40 14:23:32 Get A/D value=-858993460 result=40 14:23:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:32 Parameters OK 14:23:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:32 Set A/D data flow result=40 14:23:32 Set A/D channel type result=40 14:23:32 Set A/D encoding result=40 14:23:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:32 Set channel filter=0.000000e+000 result=40 14:23:32 Config A/D Result=40 14:23:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:32 Get A/D filter: -9.255963e+061 result=40 14:23:32 Get A/D value=-858993460 result=40 14:23:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:23:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:23:32 Aux= 14:23:32 Message to Camera, serial 67546 queued 14:23:40 Received message from Master: op=Shutter serial=67556 14:23:40 Shutter LASER close 14:23:41 Received message from Master: op=PointingHead serial=67560 14:23:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:23:41 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:23:41 Point started: ret=0 14:23:41 point_skyscan result=0 14:23:42 Check angles 14:23:42 SkyScan query 14:23:42 SkyScan query done: ret=0 az=89.655<-5977 ze=156.975<-1535 Statuses=0009 0009 14:23:42 Msec=0 True Az=89.655 Ze=156.975 Az status=0009 Ze status=0009 14:23:42 Check angles 14:23:42 SkyScan query 14:23:43 SkyScan query done: ret=0 az=71.805<-4787 ze=135.57<-2962 Statuses=0009 0009 14:23:43 Msec=750 True Az=71.805 Ze=135.57 Az status=0009 Ze status=0009 14:23:43 Check angles 14:23:43 SkyScan query 14:23:44 SkyScan query done: ret=0 az=54.585<-3639 ze=114.6<-4360 Statuses=0009 0009 14:23:44 Msec=1500 True Az=54.585 Ze=114.6 Az status=0009 Ze status=0009 14:23:44 Check angles 14:23:44 SkyScan query 14:23:45 SkyScan query done: ret=0 az=40.92<-2728 ze=93.705<-5753 Statuses=0009 0009 14:23:45 Msec=2250 True Az=40.92 Ze=93.705 Az status=0009 Ze status=0009 14:23:45 Check angles 14:23:45 SkyScan query 14:23:45 SkyScan query done: ret=0 az=40.995<-2733 ze=72.27<-7182 Statuses=0008 0009 14:23:45 Msec=3000 True Az=40.995 Ze=72.27 Az status=0008 Ze status=0009 14:23:45 Check angles 14:23:45 SkyScan query 14:23:46 SkyScan query done: ret=0 az=40.995<-2733 ze=52.185<-8521 Statuses=0008 0009 14:23:46 Msec=3750 True Az=40.995 Ze=52.185 Az status=0008 Ze status=0009 14:23:46 Check angles 14:23:46 SkyScan query 14:23:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:23:47 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:23:47 Message to Master queued w/err=0: serial=67560 error=0 14:23:52 Received message from Master: op=Filter serial=67561 14:23:52 Color wheel filter change from 0 to 0 14:23:52 FLIGetFilterPos err=0 currentPosition=0 14:23:52 FLIGetStepsRemaining err=0 RemainingSteps=0 14:23:52 Filter is already there-color wheel unchanged 14:23:52 Received message from Master: op=Shutter serial=67562 14:23:52 Shutter LASER close 14:23:52 Received message from Camera: op=State serial=67564 14:23:52 GetSingleValue result=40 Value=cccccccc 14:23:52 SkyScan query 14:23:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:23:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:53 Parameters OK 14:23:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:53 Set A/D data flow result=40 14:23:53 Set A/D channel type result=40 14:23:53 Set A/D encoding result=40 14:23:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:53 Set channel filter=0.000000e+000 result=40 14:23:53 Config A/D Result=40 14:23:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:53 Get A/D filter: -9.255963e+061 result=40 14:23:53 Get A/D value=-858993460 result=40 14:23:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:53 Parameters OK 14:23:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:53 Set A/D data flow result=40 14:23:53 Set A/D channel type result=40 14:23:53 Set A/D encoding result=40 14:23:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:53 Set channel filter=0.000000e+000 result=40 14:23:53 Config A/D Result=40 14:23:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:53 Get A/D filter: -9.255963e+061 result=40 14:23:53 Get A/D value=-858993460 result=40 14:23:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:23:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:23:53 Aux= 14:23:53 Message to Camera, serial 67564 queued 14:24:30 Received message from Master: op=PointingHead serial=67577 14:24:30 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:24:30 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:24:30 Point started: ret=0 14:24:30 point_skyscan result=0 14:24:31 Check angles 14:24:31 SkyScan query 14:24:31 SkyScan query done: ret=0 az=64.485<-4299 ze=66.555<-7563 Statuses=0009 0008 14:24:31 Msec=0 True Az=64.485 Ze=66.555 Az status=0009 Ze status=0008 14:24:31 Check angles 14:24:31 SkyScan query 14:24:32 SkyScan query done: ret=0 az=81.84<-5456 ze=66.495<-7567 Statuses=0009 0008 14:24:32 Msec=750 True Az=81.84 Ze=66.495 Az status=0009 Ze status=0008 14:24:32 Check angles 14:24:32 SkyScan query 14:24:33 SkyScan query done: ret=0 az=99.48<-6632 ze=66.495<-7567 Statuses=0009 0008 14:24:33 Msec=1500 True Az=99.48 Ze=66.495 Az status=0009 Ze status=0008 14:24:33 Check angles 14:24:33 SkyScan query 14:24:33 SkyScan query done: ret=0 az=117.375<-7825 ze=66.495<-7567 Statuses=0009 0008 14:24:33 Msec=2250 True Az=117.375 Ze=66.495 Az status=0009 Ze status=0008 14:24:34 Check angles 14:24:34 SkyScan query 14:24:34 SkyScan query done: ret=0 az=135<-9000 ze=66.495<-7567 Statuses=0009 0008 14:24:34 Msec=3000 True Az=135 Ze=66.495 Az status=0009 Ze status=0008 14:24:34 Check angles 14:24:34 SkyScan query 14:24:35 SkyScan query done: ret=0 az=152.58<-10172 ze=66.495<-7567 Statuses=0009 0008 14:24:35 Msec=3750 True Az=152.58 Ze=66.495 Az status=0009 Ze status=0008 14:24:35 Check angles 14:24:35 SkyScan query 14:24:36 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 14:24:36 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 14:24:36 Message to Master queued w/err=0: serial=67577 error=0 14:24:41 Received message from Master: op=Filter serial=67578 14:24:41 Color wheel filter change from 0 to 0 14:24:41 FLIGetFilterPos err=0 currentPosition=0 14:24:41 FLIGetStepsRemaining err=0 RemainingSteps=0 14:24:41 Filter is already there-color wheel unchanged 14:24:41 Received message from Master: op=Shutter serial=67579 14:24:41 Shutter LASER close 14:24:41 Received message from Camera: op=State serial=67581 14:24:41 GetSingleValue result=40 Value=cccccccc 14:24:41 SkyScan query 14:24:42 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:24:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:42 Parameters OK 14:24:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:42 Set A/D data flow result=40 14:24:42 Set A/D channel type result=40 14:24:42 Set A/D encoding result=40 14:24:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:42 Set channel filter=0.000000e+000 result=40 14:24:42 Config A/D Result=40 14:24:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:42 Get A/D filter: -9.255963e+061 result=40 14:24:42 Get A/D value=-858993460 result=40 14:24:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:42 Parameters OK 14:24:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:42 Set A/D data flow result=40 14:24:42 Set A/D channel type result=40 14:24:42 Set A/D encoding result=40 14:24:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:42 Set channel filter=0.000000e+000 result=40 14:24:42 Config A/D Result=40 14:24:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:42 Get A/D filter: -9.255963e+061 result=40 14:24:42 Get A/D value=-858993460 result=40 14:24:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:42 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:24:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:24:42 Aux= 14:24:42 Message to Camera, serial 67581 queued 14:25:18 Received message from Master: op=PointingHead serial=67594 14:25:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:25:18 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:25:19 Point started: ret=0 14:25:19 point_skyscan result=0 14:25:20 Check angles 14:25:20 SkyScan query 14:25:20 SkyScan query done: ret=0 az=134.82<-8988 ze=36.615<-9559 Statuses=0009 0009 14:25:20 Msec=0 True Az=134.82 Ze=36.615 Az status=0009 Ze status=0009 14:25:20 Check angles 14:25:20 SkyScan query 14:25:21 SkyScan query done: ret=0 az=117.285<-7819 ze=15.675<-10955 Statuses=0009 0009 14:25:21 Msec=750 True Az=117.285 Ze=15.675 Az status=0009 Ze status=0009 14:25:21 Check angles 14:25:21 SkyScan query 14:25:22 SkyScan query done: ret=0 az=99.915<-6661 ze=-5.325<-12355 Statuses=0009 0009 14:25:22 Msec=1500 True Az=99.915 Ze=-5.325 Az status=0009 Ze status=0009 14:25:22 Check angles 14:25:22 SkyScan query 14:25:22 SkyScan query done: ret=0 az=82.455<-5497 ze=-26.265<-13751 Statuses=0009 0009 14:25:22 Msec=2250 True Az=82.455 Ze=-26.265 Az status=0009 Ze status=0009 14:25:23 Check angles 14:25:23 SkyScan query 14:25:23 SkyScan query done: ret=0 az=64.605<-4307 ze=-38.565<-14571 Statuses=0009 0008 14:25:23 Msec=3000 True Az=64.605 Ze=-38.565 Az status=0009 Ze status=0008 14:25:23 Check angles 14:25:23 SkyScan query 14:25:24 SkyScan query done: ret=0 az=47.13<-3142 ze=-38.535<-14569 Statuses=0009 0008 14:25:24 Msec=3750 True Az=47.13 Ze=-38.535 Az status=0009 Ze status=0008 14:25:24 Check angles 14:25:24 SkyScan query 14:25:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:25:25 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:25:25 Message to Master queued w/err=0: serial=67594 error=0 14:25:30 Received message from Master: op=Filter serial=67595 14:25:30 Color wheel filter change from 0 to 0 14:25:30 FLIGetFilterPos err=0 currentPosition=0 14:25:30 FLIGetStepsRemaining err=0 RemainingSteps=0 14:25:30 Filter is already there-color wheel unchanged 14:25:30 Received message from Master: op=Shutter serial=67596 14:25:30 Shutter LASER close 14:25:30 Received message from Camera: op=State serial=67598 14:25:30 GetSingleValue result=40 Value=cccccccc 14:25:30 SkyScan query 14:25:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:25:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:30 Parameters OK 14:25:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:30 Set A/D data flow result=40 14:25:30 Set A/D channel type result=40 14:25:30 Set A/D encoding result=40 14:25:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:30 Set channel filter=0.000000e+000 result=40 14:25:30 Config A/D Result=40 14:25:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:30 Get A/D filter: -9.255963e+061 result=40 14:25:30 Get A/D value=-858993460 result=40 14:25:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:30 Parameters OK 14:25:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:30 Set A/D data flow result=40 14:25:30 Set A/D channel type result=40 14:25:30 Set A/D encoding result=40 14:25:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:30 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-11 14:25:30] 14:25:30 Config A/D Result=40 14:25:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:30 Get A/D filter: -9.255963e+061 result=40 14:25:30 Get A/D value=-858993460 result=40 14:25:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:25:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:25:30 Aux= 14:25:30 Message to Camera, serial 67598 queued 14:26:07 Received message from Master: op=PointingHead serial=67611 14:26:07 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:26:07 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:26:08 Point started: ret=0 14:26:08 point_skyscan result=0 14:26:08 Check angles 14:26:08 SkyScan query 14:26:09 SkyScan query done: ret=0 az=64.275<-4285 ze=-68.625<-16575 Statuses=0009 0009 14:26:09 Msec=0 True Az=64.275 Ze=-68.625 Az status=0009 Ze status=0009 14:26:09 Check angles 14:26:09 SkyScan query 14:26:10 SkyScan query done: ret=0 az=82.035<-5469 ze=-90.03<-18002 Statuses=0009 0009 14:26:10 Msec=750 True Az=82.035 Ze=-90.03 Az status=0009 Ze status=0009 14:26:10 Check angles 14:26:10 SkyScan query 14:26:10 SkyScan query done: ret=0 az=99.69<-6646 ze=-110.985<-19399 Statuses=0009 0009 14:26:10 Msec=1500 True Az=99.69 Ze=-110.985 Az status=0009 Ze status=0009 14:26:11 Check angles 14:26:11 SkyScan query 14:26:11 SkyScan query done: ret=0 az=117.54<-7836 ze=-132.315<-20821 Statuses=0009 0009 14:26:11 Msec=2250 True Az=117.54 Ze=-132.315 Az status=0009 Ze status=0009 14:26:11 Check angles 14:26:11 SkyScan query 14:26:12 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.54<-21436 Statuses=0009 0008 14:26:12 Msec=3000 True Az=131.055 Ze=-141.54 Az status=0009 Ze status=0008 14:26:12 Check angles 14:26:12 SkyScan query 14:26:13 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:26:13 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:26:13 Message to Master queued w/err=0: serial=67611 error=0 14:26:18 Received message from Master: op=Filter serial=67612 14:26:18 Color wheel filter change from 0 to 0 14:26:18 FLIGetFilterPos err=0 currentPosition=0 14:26:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:26:18 Filter is already there-color wheel unchanged 14:26:18 Received message from Master: op=Shutter serial=67613 14:26:18 Shutter LASER close 14:26:18 Received message from Camera: op=State serial=67615 14:26:18 GetSingleValue result=40 Value=cccccccc 14:26:18 SkyScan query 14:26:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:26:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:19 Parameters OK 14:26:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:19 Set A/D data flow result=40 14:26:19 Set A/D channel type result=40 14:26:19 Set A/D encoding result=40 14:26:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:19 Set channel filter=0.000000e+000 result=40 14:26:19 Config A/D Result=40 14:26:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:19 Get A/D filter: -9.255963e+061 result=40 14:26:19 Get A/D value=-858993460 result=40 14:26:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:19 Parameters OK 14:26:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:19 Set A/D data flow result=40 14:26:19 Set A/D channel type result=40 14:26:19 Set A/D encoding result=40 14:26:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:19 Set channel filter=0.000000e+000 result=40 14:26:19 Config A/D Result=40 14:26:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:19 Get A/D filter: -9.255963e+061 result=40 14:26:19 Get A/D value=-858993460 result=40 14:26:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:19 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:26:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:26:19 Aux= 14:26:19 Message to Camera, serial 67615 queued 14:26:55 Received message from Master: op=PointingHead serial=67628 14:26:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:26:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:26:56 Point started: ret=0 14:26:56 point_skyscan result=0 14:26:56 Check angles 14:26:56 SkyScan query 14:26:57 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 14:26:57 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 14:26:57 Check angles 14:26:57 SkyScan query 14:26:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:26:58 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:26:58 Message to Master queued w/err=0: serial=67628 error=0 14:27:03 Received message from Master: op=Filter serial=67629 14:27:03 Color wheel filter change from 0 to 0 14:27:03 FLIGetFilterPos err=0 currentPosition=0 14:27:03 FLIGetStepsRemaining err=0 RemainingSteps=0 14:27:03 Filter is already there-color wheel unchanged 14:27:03 Received message from Master: op=Shutter serial=67630 14:27:03 Shutter LASER open 14:27:03 Received message from Camera: op=State serial=67632 14:27:03 GetSingleValue result=40 Value=cccccccc 14:27:03 SkyScan query 14:27:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:27:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:04 Parameters OK 14:27:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:04 Set A/D data flow result=40 14:27:04 Set A/D channel type result=40 14:27:04 Set A/D encoding result=40 14:27:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:04 Set channel filter=0.000000e+000 result=40 14:27:04 Config A/D Result=40 14:27:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:04 Get A/D filter: -9.255963e+061 result=40 14:27:04 Get A/D value=-858993460 result=40 14:27:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:04 Parameters OK 14:27:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:04 Set A/D data flow result=40 14:27:04 Set A/D channel type result=40 14:27:04 Set A/D encoding result=40 14:27:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:04 Set channel filter=0.000000e+000 result=40 14:27:04 Config A/D Result=40 14:27:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:04 Get A/D filter: -9.255963e+061 result=40 14:27:04 Get A/D value=-858993460 result=40 14:27:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:27:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:27:04 Aux= 14:27:04 Message to Camera, serial 67632 queued 14:27:11 Received message from Master: op=Shutter serial=67641 14:27:11 Shutter LASER close 14:27:12 Received message from Master: op=PointingHead serial=67645 14:27:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:27:12 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:27:12 Point started: ret=0 14:27:12 point_skyscan result=0 14:27:13 Check angles 14:27:13 SkyScan query 14:27:14 SkyScan query done: ret=0 az=136.155<-9077 ze=-142.95<-21530 Statuses=0009 0009 14:27:14 Msec=0 True Az=136.155 Ze=-142.95 Az status=0009 Ze status=0009 14:27:14 Check angles 14:27:14 SkyScan query 14:27:14 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.98<-20132 Statuses=0009 0009 14:27:14 Msec=750 True Az=153.75 Ze=-121.98 Az status=0009 Ze status=0009 14:27:14 Check angles 14:27:14 SkyScan query 14:27:15 SkyScan query done: ret=0 az=171.21<-11414 ze=-101.07<-18738 Statuses=0009 0009 14:27:15 Msec=1500 True Az=171.21 Ze=-101.07 Az status=0009 Ze status=0009 14:27:15 Check angles 14:27:15 SkyScan query 14:27:16 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.13<-17342 Statuses=0008 0009 14:27:16 Msec=2250 True Az=176.025 Ze=-80.13 Az status=0008 Ze status=0009 14:27:16 Check angles 14:27:16 SkyScan query 14:27:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.13<-15942 Statuses=0008 0009 14:27:17 Msec=3000 True Az=175.995 Ze=-59.13 Az status=0008 Ze status=0009 14:27:17 Check angles 14:27:17 SkyScan query 14:27:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:27:17 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:27:17 Message to Master queued w/err=0: serial=67645 error=0 14:27:22 Received message from Master: op=Filter serial=67646 14:27:22 Color wheel filter change from 0 to 0 14:27:22 FLIGetFilterPos err=0 currentPosition=0 14:27:22 FLIGetStepsRemaining err=0 RemainingSteps=0 14:27:22 Filter is already there-color wheel unchanged 14:27:22 Received message from Master: op=Shutter serial=67647 14:27:22 Shutter LASER close 14:27:23 Received message from Camera: op=State serial=67649 14:27:23 GetSingleValue result=40 Value=cccccccc 14:27:23 SkyScan query 14:27:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:27:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:23 Parameters OK 14:27:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:23 Set A/D data flow result=40 14:27:23 Set A/D channel type result=40 14:27:23 Set A/D encoding result=40 14:27:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:23 Set channel filter=0.000000e+000 result=40 14:27:23 Config A/D Result=40 14:27:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:23 Get A/D filter: -9.255963e+061 result=40 14:27:23 Get A/D value=-858993460 result=40 14:27:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:23 Parameters OK 14:27:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:23 Set A/D data flow result=40 14:27:23 Set A/D channel type result=40 14:27:23 Set A/D encoding result=40 14:27:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:23 Set channel filter=0.000000e+000 result=40 14:27:23 Config A/D Result=40 14:27:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:23 Get A/D filter: -9.255963e+061 result=40 14:27:23 Get A/D value=-858993460 result=40 14:27:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:27:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:27:23 Aux= 14:27:23 Message to Camera, serial 67649 queued 14:28:00 Received message from Master: op=PointingHead serial=67662 14:28:00 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:28:00 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:28:00 Point started: ret=0 14:28:00 point_skyscan result=0 14:28:01 Check angles 14:28:01 SkyScan query 14:28:02 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.93<-13462 Statuses=0009 0009 14:28:02 Msec=0 True Az=152.985 Ze=-21.93 Az status=0009 Ze status=0009 14:28:02 Check angles 14:28:02 SkyScan query 14:28:02 SkyScan query done: ret=0 az=135.495<-9033 ze=-0.93<-12062 Statuses=0009 0009 14:28:02 Msec=750 True Az=135.495 Ze=-0.93 Az status=0009 Ze status=0009 14:28:03 Check angles 14:28:03 SkyScan query 14:28:03 SkyScan query done: ret=0 az=118.02<-7868 ze=20.01<-10666 Statuses=0009 0009 14:28:03 Msec=1500 True Az=118.02 Ze=20.01 Az status=0009 Ze status=0009 14:28:03 Check angles 14:28:03 SkyScan query 14:28:04 SkyScan query done: ret=0 az=100.53<-6702 ze=40.965<-9269 Statuses=0009 0009 14:28:04 Msec=2250 True Az=100.53 Ze=40.965 Az status=0009 Ze status=0009 14:28:04 Check angles 14:28:04 SkyScan query 14:28:05 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 14:28:05 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 14:28:05 Check angles 14:28:05 SkyScan query 14:28:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:28:05 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:28:05 Message to Master queued w/err=0: serial=67662 error=0 14:28:10 Received message from Master: op=Filter serial=67663 14:28:10 Color wheel filter change from 0 to 0 14:28:10 FLIGetFilterPos err=0 currentPosition=0 14:28:10 FLIGetStepsRemaining err=0 RemainingSteps=0 14:28:10 Filter is already there-color wheel unchanged 14:28:11 Received message from Master: op=Shutter serial=67664 14:28:11 Shutter LASER close 14:28:11 Received message from Camera: op=State serial=67666 14:28:11 GetSingleValue result=40 Value=cccccccc 14:28:11 SkyScan query 14:28:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:28:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:11 Parameters OK 14:28:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:11 Set A/D data flow result=40 14:28:11 Set A/D channel type result=40 14:28:11 Set A/D encoding result=40 14:28:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:11 Set channel filter=0.000000e+000 result=40 14:28:11 Config A/D Result=40 14:28:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:11 Get A/D filter: -9.255963e+061 result=40 14:28:11 Get A/D value=-858993460 result=40 14:28:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:11 Parameters OK 14:28:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:11 Set A/D data flow result=40 14:28:11 Set A/D channel type result=40 14:28:11 Set A/D encoding result=40 14:28:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:11 Set channel filter=0.000000e+000 result=40 14:28:11 Config A/D Result=40 14:28:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:11 Get A/D filter: -9.255963e+061 result=40 14:28:11 Get A/D value=-858993460 result=40 14:28:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:28:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:28:11 Aux= 14:28:11 Message to Camera, serial 67666 queued 14:28:47 Received message from Master: op=PointingHead serial=67678 14:28:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:28:47 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:28:47 Point started: ret=0 14:28:47 point_skyscan result=0 14:28:48 Check angles 14:28:48 SkyScan query 14:28:49 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 14:28:49 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 14:28:49 Check angles 14:28:49 SkyScan query 14:28:50 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 14:28:50 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 14:28:50 Check angles 14:28:50 SkyScan query 14:28:50 SkyScan query done: ret=0 az=144.03<-9602 ze=38.505<-9433 Statuses=0009 0008 14:28:50 Msec=1500 True Az=144.03 Ze=38.505 Az status=0009 Ze status=0008 14:28:50 Check angles 14:28:50 SkyScan query 14:28:51 SkyScan query done: ret=0 az=161.415<-10761 ze=38.505<-9433 Statuses=0009 0008 14:28:51 Msec=2250 True Az=161.415 Ze=38.505 Az status=0009 Ze status=0008 14:28:51 Check angles 14:28:51 SkyScan query 14:28:52 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 14:28:52 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 14:28:52 Check angles 14:28:52 SkyScan query 14:28:53 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:28:53 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:28:53 Message to Master queued w/err=0: serial=67678 error=0 14:28:58 Received message from Master: op=Filter serial=67679 14:28:58 Color wheel filter change from 0 to 0 14:28:58 FLIGetFilterPos err=0 currentPosition=0 14:28:58 FLIGetStepsRemaining err=0 RemainingSteps=0 14:28:58 Filter is already there-color wheel unchanged 14:28:58 Received message from Master: op=Shutter serial=67680 14:28:58 Shutter LASER close 14:28:58 Received message from Camera: op=State serial=67682 14:28:58 GetSingleValue result=40 Value=cccccccc 14:28:58 SkyScan query 14:28:58 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:28:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:58 Parameters OK 14:28:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:58 Set A/D data flow result=40 14:28:58 Set A/D channel type result=40 14:28:58 Set A/D encoding result=40 14:28:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:58 Set channel filter=0.000000e+000 result=40 14:28:58 Config A/D Result=40 14:28:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:58 Get A/D filter: -9.255963e+061 result=40 14:28:58 Get A/D value=-858993460 result=40 14:28:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:58 Parameters OK 14:28:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:58 Set A/D data flow result=40 14:28:58 Set A/D channel type result=40 14:28:58 Set A/D encoding result=40 14:28:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:58 Set channel filter=0.000000e+000 result=40 14:28:58 Config A/D Result=40 14:28:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:58 Get A/D filter: -9.255963e+061 result=40 14:28:58 Get A/D value=-858993460 result=40 14:28:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:28:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:28:58 Aux= 14:28:58 Message to Camera, serial 67682 queued 14:29:35 Received message from Master: op=PointingHead serial=67695 14:29:35 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:29:35 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:29:36 Point started: ret=0 14:29:36 point_skyscan result=0 14:29:36 Check angles 14:29:36 SkyScan query 14:29:37 SkyScan query done: ret=0 az=152.775<-10185 ze=8.385<-11441 Statuses=0009 0009 14:29:37 Msec=0 True Az=152.775 Ze=8.385 Az status=0009 Ze status=0009 14:29:37 Check angles 14:29:37 SkyScan query 14:29:38 SkyScan query done: ret=0 az=134.85<-8990 ze=-12.99<-12866 Statuses=0009 0009 14:29:38 Msec=750 True Az=134.85 Ze=-12.99 Az status=0009 Ze status=0009 14:29:38 Check angles 14:29:38 SkyScan query 14:29:38 SkyScan query done: ret=0 az=117.36<-7824 ze=-33.96<-14264 Statuses=0009 0009 14:29:38 Msec=1500 True Az=117.36 Ze=-33.96 Az status=0009 Ze status=0009 14:29:39 Check angles 14:29:39 SkyScan query 14:29:39 SkyScan query done: ret=0 az=100.08<-6672 ze=-51.57<-15438 Statuses=0009 0009 14:29:39 Msec=2250 True Az=100.08 Ze=-51.57 Az status=0009 Ze status=0009 14:29:39 Check angles 14:29:39 SkyScan query 14:29:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 14:29:40 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 14:29:40 Check angles 14:29:40 SkyScan query 14:29:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:29:41 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:29:41 Message to Master queued w/err=0: serial=67695 error=0 14:29:46 Received message from Master: op=Filter serial=67696 14:29:46 Color wheel filter change from 0 to 0 14:29:46 FLIGetFilterPos err=0 currentPosition=0 14:29:46 FLIGetStepsRemaining err=0 RemainingSteps=0 14:29:46 Filter is already there-color wheel unchanged 14:29:46 Received message from Master: op=Shutter serial=67697 14:29:46 Shutter LASER close 14:29:46 Received message from Camera: op=State serial=67699 14:29:46 GetSingleValue result=40 Value=cccccccc 14:29:46 SkyScan query 14:29:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:29:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:46 Parameters OK 14:29:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:46 Set A/D data flow result=40 14:29:46 Set A/D channel type result=40 14:29:46 Set A/D encoding result=40 14:29:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:46 Set channel filter=0.000000e+000 result=40 14:29:46 Config A/D Result=40 14:29:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:46 Get A/D filter: -9.255963e+061 result=40 14:29:46 Get A/D value=-858993460 result=40 14:29:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:46 Parameters OK 14:29:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:46 Set A/D data flow result=40 14:29:46 Set A/D channel type result=40 14:29:46 Set A/D encoding result=40 14:29:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:46 Set channel filter=0.000000e+000 result=40 14:29:46 Config A/D Result=40 14:29:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:46 Get A/D filter: -9.255963e+061 result=40 14:29:46 Get A/D value=-858993460 result=40 14:29:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:29:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:29:46 Aux= 14:29:46 Message to Camera, serial 67699 queued 14:30:23 Received message from Master: op=PointingHead serial=67712 14:30:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:30:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:30:24 Point started: ret=0 14:30:24 point_skyscan result=0 14:30:24 Check angles 14:30:24 SkyScan query 14:30:25 SkyScan query done: ret=0 az=109.365<-7291 ze=-81.66<-17444 Statuses=0009 0009 14:30:25 Msec=0 True Az=109.365 Ze=-81.66 Az status=0009 Ze status=0009 14:30:25 Check angles 14:30:25 SkyScan query 14:30:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.585<-18839 Statuses=0008 0009 14:30:26 Msec=750 True Az=112.995 Ze=-102.585 Az status=0008 Ze status=0009 14:30:26 Check angles 14:30:26 SkyScan query 14:30:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.99<-20266 Statuses=0008 0009 14:30:26 Msec=1500 True Az=112.995 Ze=-123.99 Az status=0008 Ze status=0009 14:30:27 Check angles 14:30:27 SkyScan query 14:30:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.38<-21692 Statuses=0008 0009 14:30:27 Msec=2250 True Az=112.995 Ze=-145.38 Az status=0008 Ze status=0009 14:30:27 Check angles 14:30:27 SkyScan query 14:30:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.785<-23119 Statuses=0008 0009 14:30:28 Msec=3000 True Az=112.995 Ze=-166.785 Az status=0008 Ze status=0009 14:30:28 Check angles 14:30:28 SkyScan query 14:30:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:30:29 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:30:29 Message to Master queued w/err=0: serial=67712 error=0 14:30:34 Received message from Master: op=Filter serial=67713 14:30:34 Color wheel filter change from 0 to 0 14:30:34 FLIGetFilterPos err=0 currentPosition=0 14:30:34 FLIGetStepsRemaining err=0 RemainingSteps=0 14:30:34 Filter is already there-color wheel unchanged 14:30:34 Received message from Master: op=Shutter serial=67714 14:30:34 Shutter LASER open 14:30:34 Received message from Camera: op=State serial=67716 14:30:34 GetSingleValue result=40 Value=cccccccc 14:30:34 SkyScan query 14:30:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:30:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:35 Parameters OK 14:30:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:35 Set A/D data flow result=40 14:30:35 Set A/D channel type result=40 14:30:35 Set A/D encoding result=40 14:30:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:35 Set channel filter=0.000000e+000 result=40 14:30:35 Config A/D Result=40 14:30:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:35 Get A/D filter: -9.255963e+061 result=40 14:30:35 Get A/D value=-858993460 result=40 14:30:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:35 Parameters OK 14:30:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:35 Set A/D data flow result=40 14:30:35 Set A/D channel type result=40 14:30:35 Set A/D encoding result=40 14:30:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:35 Set channel filter=0.000000e+000 result=40 14:30:35 Config A/D Result=40 14:30:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:35 Get A/D filter: -9.255963e+061 result=40 14:30:35 Get A/D value=-858993460 result=40 14:30:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:30:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:30:35 Aux= 14:30:35 Message to Camera, serial 67716 queued 14:30:43 Received message from Master: op=Shutter serial=67726 14:30:43 Shutter LASER close 14:30:44 Received message from Master: op=PointingHead serial=67730 14:30:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:30:44 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:30:44 Point started: ret=0 14:30:44 point_skyscan result=0 14:30:45 Check angles 14:30:45 SkyScan query 14:30:45 SkyScan query done: ret=0 az=89.85<-5990 ze=157.125<-1525 Statuses=0009 0009 14:30:45 Msec=0 True Az=89.85 Ze=157.125 Az status=0009 Ze status=0009 14:30:45 Check angles 14:30:45 SkyScan query 14:30:46 SkyScan query done: ret=0 az=72.3<-4820 ze=136.17<-2922 Statuses=0009 0009 14:30:46 Msec=750 True Az=72.3 Ze=136.17 Az status=0009 Ze status=0009 14:30:46 Check angles 14:30:46 SkyScan query 14:30:47 SkyScan query done: ret=0 az=55.035<-3669 ze=115.245<-4317 Statuses=0009 0009 14:30:47 Msec=1500 True Az=55.035 Ze=115.245 Az status=0009 Ze status=0009 14:30:47 Check angles 14:30:47 SkyScan query 14:30:48 SkyScan query done: ret=0 az=40.86<-2724 ze=94.245<-5717 Statuses=0009 0009 14:30:48 Msec=2250 True Az=40.86 Ze=94.245 Az status=0009 Ze status=0009 14:30:48 Check angles 14:30:48 SkyScan query 14:30:48 SkyScan query done: ret=0 az=40.995<-2733 ze=73.29<-7114 Statuses=0008 0009 14:30:48 Msec=3000 True Az=40.995 Ze=73.29 Az status=0008 Ze status=0009 14:30:48 Check angles 14:30:48 SkyScan query 14:30:49 SkyScan query done: ret=0 az=40.995<-2733 ze=52.77<-8482 Statuses=0008 0009 14:30:49 Msec=3750 True Az=40.995 Ze=52.77 Az status=0008 Ze status=0009 14:30:49 Check angles 14:30:49 SkyScan query 14:30:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:30:50 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:30:50 Message to Master queued w/err=0: serial=67730 error=0 14:30:55 Received message from Master: op=Filter serial=67731 14:30:55 Color wheel filter change from 0 to 0 14:30:55 FLIGetFilterPos err=0 currentPosition=0 14:30:55 FLIGetStepsRemaining err=0 RemainingSteps=0 14:30:55 Filter is already there-color wheel unchanged 14:30:55 Received message from Master: op=Shutter serial=67732 14:30:55 Shutter LASER close 14:30:55 Received message from Camera: op=State serial=67734 14:30:55 GetSingleValue result=40 Value=cccccccc 14:30:55 SkyScan query 14:30:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:30:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:56 Parameters OK 14:30:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:56 Set A/D data flow result=40 14:30:56 Set A/D channel type result=40 14:30:56 Set A/D encoding result=40 14:30:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:56 Set channel filter=0.000000e+000 result=40 14:30:56 Config A/D Result=40 14:30:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:56 Get A/D filter: -9.255963e+061 result=40 14:30:56 Get A/D value=-858993460 result=40 14:30:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:56 Parameters OK 14:30:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:56 Set A/D data flow result=40 14:30:56 Set A/D channel type result=40 14:30:56 Set A/D encoding result=40 14:30:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:56 Set channel filter=0.000000e+000 result=40 14:30:56 Config A/D Result=40 14:30:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:56 Get A/D filter: -9.255963e+061 result=40 14:30:56 Get A/D value=-858993460 result=40 14:30:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:30:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:30:56 Aux= 14:30:56 Message to Camera, serial 67734 queued 14:31:32 Received message from Master: op=PointingHead serial=67747 14:31:32 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:31:32 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:31:33 Point started: ret=0 14:31:33 point_skyscan result=0 14:31:34 Check angles 14:31:34 SkyScan query 14:31:34 SkyScan query done: ret=0 az=63.96<-4264 ze=66.555<-7563 Statuses=0009 0008 14:31:34 Msec=0 True Az=63.96 Ze=66.555 Az status=0009 Ze status=0008 14:31:34 Check angles 14:31:34 SkyScan query 14:31:35 SkyScan query done: ret=0 az=81.345<-5423 ze=66.51<-7566 Statuses=0009 0008 14:31:35 Msec=750 True Az=81.345 Ze=66.51 Az status=0009 Ze status=0008 14:31:35 Check angles 14:31:35 SkyScan query 14:31:36 SkyScan query done: ret=0 az=98.91<-6594 ze=66.495<-7567 Statuses=0009 0008 14:31:36 Msec=1500 True Az=98.91 Ze=66.495 Az status=0009 Ze status=0008 14:31:36 Check angles 14:31:36 SkyScan query 14:31:36 SkyScan query done: ret=0 az=116.475<-7765 ze=66.495<-7567 Statuses=0009 0008 14:31:36 Msec=2250 True Az=116.475 Ze=66.495 Az status=0009 Ze status=0008 14:31:37 Check angles 14:31:37 SkyScan query 14:31:37 SkyScan query done: ret=0 az=134.07<-8938 ze=66.495<-7567 Statuses=0009 0008 14:31:37 Msec=3000 True Az=134.07 Ze=66.495 Az status=0009 Ze status=0008 14:31:37 Check angles 14:31:37 SkyScan query 14:31:38 SkyScan query done: ret=0 az=151.425<-10095 ze=66.495<-7567 Statuses=0009 0008 14:31:38 Msec=3750 True Az=151.425 Ze=66.495 Az status=0009 Ze status=0008 14:31:38 Check angles 14:31:38 SkyScan query 14:31:39 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:31:39 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 14:31:39 Message to Master queued w/err=0: serial=67747 error=0 14:31:44 Received message from Master: op=Filter serial=67748 14:31:44 Color wheel filter change from 0 to 0 14:31:44 FLIGetFilterPos err=0 currentPosition=0 14:31:44 FLIGetStepsRemaining err=0 RemainingSteps=0 14:31:44 Filter is already there-color wheel unchanged 14:31:44 Received message from Master: op=Shutter serial=67749 14:31:44 Shutter LASER close 14:31:44 Received message from Camera: op=State serial=67751 14:31:44 GetSingleValue result=40 Value=cccccccc 14:31:44 SkyScan query 14:31:44 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:31:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:44 Parameters OK 14:31:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:44 Set A/D data flow result=40 14:31:44 Set A/D channel type result=40 14:31:44 Set A/D encoding result=40 14:31:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:44 Set channel filter=0.000000e+000 result=40 14:31:44 Config A/D Result=40 14:31:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:44 Get A/D filter: -9.255963e+061 result=40 14:31:44 Get A/D value=-858993460 result=40 14:31:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:44 Parameters OK 14:31:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:44 Set A/D data flow result=40 14:31:44 Set A/D channel type result=40 14:31:44 Set A/D encoding result=40 14:31:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:44 Set channel filter=0.000000e+000 result=40 14:31:44 Config A/D Result=40 14:31:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:44 Get A/D filter: -9.255963e+061 result=40 14:31:44 Get A/D value=-858993460 result=40 14:31:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:44 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:31:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:31:44 Aux= 14:31:44 Message to Camera, serial 67751 queued 14:32:21 Received message from Master: op=PointingHead serial=67764 14:32:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:32:21 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:32:22 Point started: ret=0 14:32:22 point_skyscan result=0 14:32:22 Check angles 14:32:22 SkyScan query 14:32:23 SkyScan query done: ret=0 az=134.595<-8973 ze=36.27<-9582 Statuses=0009 0009 14:32:23 Msec=0 True Az=134.595 Ze=36.27 Az status=0009 Ze status=0009 14:32:23 Check angles 14:32:23 SkyScan query 14:32:24 SkyScan query done: ret=0 az=117.09<-7806 ze=15.345<-10977 Statuses=0009 0009 14:32:24 Msec=750 True Az=117.09 Ze=15.345 Az status=0009 Ze status=0009 14:32:24 Check angles 14:32:24 SkyScan query 14:32:25 SkyScan query done: ret=0 az=99.78<-6652 ze=-5.64<-12376 Statuses=0009 0009 14:32:25 Msec=1500 True Az=99.78 Ze=-5.64 Az status=0009 Ze status=0009 14:32:25 Check angles 14:32:25 SkyScan query 14:32:25 SkyScan query done: ret=0 az=82.23<-5482 ze=-26.595<-13773 Statuses=0009 0009 14:32:25 Msec=2250 True Az=82.23 Ze=-26.595 Az status=0009 Ze status=0009 14:32:25 Check angles 14:32:25 SkyScan query 14:32:26 SkyScan query done: ret=0 az=64.77<-4318 ze=-38.565<-14571 Statuses=0009 0008 14:32:26 Msec=3000 True Az=64.77 Ze=-38.565 Az status=0009 Ze status=0008 14:32:26 Check angles 14:32:26 SkyScan query 14:32:27 SkyScan query done: ret=0 az=47.325<-3155 ze=-38.535<-14569 Statuses=0009 0008 14:32:27 Msec=3750 True Az=47.325 Ze=-38.535 Az status=0009 Ze status=0008 14:32:27 Check angles 14:32:27 SkyScan query 14:32:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:32:28 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:32:28 Message to Master queued w/err=0: serial=67764 error=0 14:32:33 Received message from Master: op=Filter serial=67765 14:32:33 Color wheel filter change from 0 to 0 14:32:33 FLIGetFilterPos err=0 currentPosition=0 14:32:33 FLIGetStepsRemaining err=0 RemainingSteps=0 14:32:33 Filter is already there-color wheel unchanged 14:32:33 Received message from Master: op=Shutter serial=67766 14:32:33 Shutter LASER close 14:32:33 Received message from Camera: op=State serial=67768 14:32:33 GetSingleValue result=40 Value=cccccccc 14:32:33 SkyScan query 14:32:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:32:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:33 Parameters OK 14:32:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:33 Set A/D data flow result=40 14:32:33 Set A/D channel type result=40 14:32:33 Set A/D encoding result=40 14:32:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:33 Set channel filter=0.000000e+000 result=40 14:32:33 Config A/D Result=40 14:32:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:33 Get A/D filter: -9.255963e+061 result=40 14:32:33 Get A/D value=-858993460 result=40 14:32:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:33 Parameters OK 14:32:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:33 Set A/D data flow result=40 14:32:33 Set A/D channel type result=40 14:32:33 Set A/D encoding result=40 14:32:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:33 Set channel filter=0.000000e+000 result=40 14:32:33 Config A/D Result=40 14:32:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:33 Get A/D filter: -9.255963e+061 result=40 14:32:33 Get A/D value=-858993460 result=40 14:32:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:32:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:32:33 Aux= 14:32:33 Message to Camera, serial 67768 queued 14:33:10 Received message from Master: op=PointingHead serial=67781 14:33:10 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:33:10 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:33:10 Point started: ret=0 14:33:10 point_skyscan result=0 14:33:11 Check angles 14:33:11 SkyScan query 14:33:12 SkyScan query done: ret=0 az=64.41<-4294 ze=-68.745<-16583 Statuses=0009 0009 14:33:12 Msec=0 True Az=64.41 Ze=-68.745 Az status=0009 Ze status=0009 14:33:12 Check angles 14:33:12 SkyScan query 14:33:13 SkyScan query done: ret=0 az=81.735<-5449 ze=-89.73<-17982 Statuses=0009 0009 14:33:13 Msec=750 True Az=81.735 Ze=-89.73 Az status=0009 Ze status=0009 14:33:13 Check angles 14:33:13 SkyScan query 14:33:13 SkyScan query done: ret=0 az=99.345<-6623 ze=-110.685<-19379 Statuses=0009 0009 14:33:13 Msec=1500 True Az=99.345 Ze=-110.685 Az status=0009 Ze status=0009 14:33:14 Check angles 14:33:14 SkyScan query 14:33:14 SkyScan query done: ret=0 az=117.33<-7822 ze=-132.015<-20801 Statuses=0009 0009 14:33:14 Msec=2250 True Az=117.33 Ze=-132.015 Az status=0009 Ze status=0009 14:33:14 Check angles 14:33:14 SkyScan query 14:33:15 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 14:33:15 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 14:33:15 Check angles 14:33:15 SkyScan query 14:33:16 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:33:16 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:33:16 Message to Master queued w/err=0: serial=67781 error=0 14:33:21 Received message from Master: op=Filter serial=67782 14:33:21 Color wheel filter change from 0 to 0 14:33:21 FLIGetFilterPos err=0 currentPosition=0 14:33:21 FLIGetStepsRemaining err=0 RemainingSteps=0 14:33:21 Filter is already there-color wheel unchanged 14:33:21 Received message from Master: op=Shutter serial=67783 14:33:21 Shutter LASER close 14:33:21 Received message from Camera: op=State serial=67785 14:33:21 GetSingleValue result=40 Value=cccccccc 14:33:21 SkyScan query 14:33:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:33:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:21 Parameters OK 14:33:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:21 Set A/D data flow result=40 14:33:21 Set A/D channel type result=40 14:33:21 Set A/D encoding result=40 14:33:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:21 Set channel filter=0.000000e+000 result=40 14:33:21 Config A/D Result=40 14:33:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:21 Get A/D filter: -9.255963e+061 result=40 14:33:21 Get A/D value=-858993460 result=40 14:33:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:21 Parameters OK 14:33:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:21 Set A/D data flow result=40 14:33:21 Set A/D channel type result=40 14:33:21 Set A/D encoding result=40 14:33:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:21 Set channel filter=0.000000e+000 result=40 14:33:21 Config A/D Result=40 14:33:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:21 Get A/D filter: -9.255963e+061 result=40 14:33:21 Get A/D value=-858993460 result=40 14:33:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:21 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:33:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:33:21 Aux= 14:33:21 Message to Camera, serial 67785 queued 14:33:57 Received message from Master: op=PointingHead serial=67797 14:33:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:33:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:33:58 Point started: ret=0 14:33:58 point_skyscan result=0 14:33:58 Check angles 14:33:58 SkyScan query 14:33:59 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.06<-23404 Statuses=0009 0009 14:33:59 Msec=0 True Az=113.01 Ze=-171.06 Az status=0009 Ze status=0009 14:33:59 Check angles 14:33:59 SkyScan query 14:34:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:34:00 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:34:00 Message to Master queued w/err=0: serial=67797 error=0 14:34:05 Received message from Master: op=Filter serial=67798 14:34:05 Color wheel filter change from 0 to 0 14:34:05 FLIGetFilterPos err=0 currentPosition=0 14:34:05 FLIGetStepsRemaining err=0 RemainingSteps=0 14:34:05 Filter is already there-color wheel unchanged 14:34:05 Received message from Master: op=Shutter serial=67799 14:34:05 Shutter LASER open 14:34:05 Received message from Camera: op=State serial=67801 14:34:05 GetSingleValue result=40 Value=cccccccc 14:34:05 SkyScan query 14:34:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:34:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:06 Parameters OK 14:34:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:06 Set A/D data flow result=40 14:34:06 Set A/D channel type result=40 14:34:06 Set A/D encoding result=40 14:34:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:06 Set channel filter=0.000000e+000 result=40 14:34:06 Config A/D Result=40 14:34:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:06 Get A/D filter: -9.255963e+061 result=40 14:34:06 Get A/D value=-858993460 result=40 14:34:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:06 Parameters OK 14:34:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:06 Set A/D data flow result=40 14:34:06 Set A/D channel type result=40 14:34:06 Set A/D encoding result=40 14:34:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:06 Set channel filter=0.000000e+000 result=40 14:34:06 Config A/D Result=40 14:34:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:06 Get A/D filter: -9.255963e+061 result=40 14:34:06 Get A/D value=-858993460 result=40 14:34:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:34:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:34:06 Aux= 14:34:06 Message to Camera, serial 67801 queued 14:34:14 Received message from Master: op=Shutter serial=67811 14:34:14 Shutter LASER close 14:34:15 Received message from Master: op=PointingHead serial=67815 14:34:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:34:15 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:34:15 Point started: ret=0 14:34:15 point_skyscan result=0 14:34:16 Check angles 14:34:16 SkyScan query 14:34:16 SkyScan query done: ret=0 az=135.87<-9058 ze=-143.295<-21553 Statuses=0009 0009 14:34:16 Msec=0 True Az=135.87 Ze=-143.295 Az status=0009 Ze status=0009 14:34:17 Check angles 14:34:17 SkyScan query 14:34:17 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.89<-20126 Statuses=0009 0009 14:34:17 Msec=750 True Az=153.75 Ze=-121.89 Az status=0009 Ze status=0009 14:34:17 Check angles 14:34:17 SkyScan query 14:34:18 SkyScan query done: ret=0 az=171.195<-11413 ze=-100.95<-18730 Statuses=0009 0009 14:34:18 Msec=1500 True Az=171.195 Ze=-100.95 Az status=0009 Ze status=0009 14:34:18 Check angles 14:34:18 SkyScan query 14:34:19 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.01<-17334 Statuses=0008 0009 14:34:19 Msec=2250 True Az=176.025 Ze=-80.01 Az status=0008 Ze status=0009 14:34:19 Check angles 14:34:19 SkyScan query 14:34:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.56<-15904 Statuses=0008 0009 14:34:19 Msec=3000 True Az=176.01 Ze=-58.56 Az status=0008 Ze status=0009 14:34:20 Check angles 14:34:20 SkyScan query 14:34:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 14:34:20 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 14:34:20 Message to Master queued w/err=0: serial=67815 error=0 14:34:25 Received message from Master: op=Filter serial=67816 14:34:25 Color wheel filter change from 0 to 0 14:34:25 FLIGetFilterPos err=0 currentPosition=0 14:34:25 FLIGetStepsRemaining err=0 RemainingSteps=0 14:34:25 Filter is already there-color wheel unchanged 14:34:25 Received message from Master: op=Shutter serial=67817 14:34:25 Shutter LASER close 14:34:25 Received message from Camera: op=State serial=67819 14:34:25 GetSingleValue result=40 Value=cccccccc 14:34:25 SkyScan query 14:34:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:34:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:26 Parameters OK 14:34:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:26 Set A/D data flow result=40 14:34:26 Set A/D channel type result=40 14:34:26 Set A/D encoding result=40 14:34:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:26 Set channel filter=0.000000e+000 result=40 14:34:26 Config A/D Result=40 14:34:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:26 Get A/D filter: -9.255963e+061 result=40 14:34:26 Get A/D value=-858993460 result=40 14:34:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:26 Parameters OK 14:34:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:26 Set A/D data flow result=40 14:34:26 Set A/D channel type result=40 14:34:26 Set A/D encoding result=40 14:34:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:26 Set channel filter=0.000000e+000 result=40 14:34:26 Config A/D Result=40 14:34:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:26 Get A/D filter: -9.255963e+061 result=40 14:34:26 Get A/D value=-858993460 result=40 14:34:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:34:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:34:26 Aux= 14:34:26 Message to Camera, serial 67819 queued 14:35:03 Received message from Master: op=PointingHead serial=67832 14:35:03 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:35:03 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:35:03 Point started: ret=0 14:35:03 point_skyscan result=0 14:35:04 Check angles 14:35:04 SkyScan query 14:35:05 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.705<-13447 Statuses=0009 0009 14:35:05 Msec=0 True Az=152.925 Ze=-21.705 Az status=0009 Ze status=0009 14:35:05 Check angles 14:35:05 SkyScan query 14:35:05 SkyScan query done: ret=0 az=135.51<-9034 ze=-0.705<-12047 Statuses=0009 0009 14:35:05 Msec=750 True Az=135.51 Ze=-0.705 Az status=0009 Ze status=0009 14:35:05 Check angles 14:35:05 SkyScan query 14:35:06 SkyScan query done: ret=0 az=117.945<-7863 ze=20.22<-10652 Statuses=0009 0009 14:35:06 Msec=1500 True Az=117.945 Ze=20.22 Az status=0009 Ze status=0009 14:35:06 Check angles 14:35:06 SkyScan query 14:35:07 SkyScan query done: ret=0 az=100.455<-6697 ze=41.205<-9253 Statuses=0009 0009 14:35:07 Msec=2250 True Az=100.455 Ze=41.205 Az status=0009 Ze status=0009 14:35:07 Check angles 14:35:07 SkyScan query 14:35:08 SkyScan query done: ret=0 az=86.04<-5736 ze=51.555<-8563 Statuses=0009 0008 14:35:08 Msec=3000 True Az=86.04 Ze=51.555 Az status=0009 Ze status=0008 14:35:08 Check angles 14:35:08 SkyScan query 14:35:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:35:08 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:35:08 Message to Master queued w/err=0: serial=67832 error=0 14:35:13 Received message from Master: op=Filter serial=67833 14:35:13 Color wheel filter change from 0 to 0 14:35:13 FLIGetFilterPos err=0 currentPosition=0 14:35:13 FLIGetStepsRemaining err=0 RemainingSteps=0 14:35:13 Filter is already there-color wheel unchanged 14:35:13 Received message from Master: op=Shutter serial=67834 14:35:13 Shutter LASER close 14:35:14 Received message from Camera: op=State serial=67836 14:35:14 GetSingleValue result=40 Value=cccccccc 14:35:14 SkyScan query 14:35:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:35:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:14 Parameters OK 14:35:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:14 Set A/D data flow result=40 14:35:14 Set A/D channel type result=40 14:35:14 Set A/D encoding result=40 14:35:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:14 Set channel filter=0.000000e+000 result=40 14:35:14 Config A/D Result=40 14:35:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:14 Get A/D filter: -9.255963e+061 result=40 14:35:14 Get A/D value=-858993460 result=40 14:35:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:14 Parameters OK 14:35:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:14 Set A/D data flow result=40 14:35:14 Set A/D channel type result=40 14:35:14 Set A/D encoding result=40 14:35:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:14 Set channel filter=0.000000e+000 result=40 14:35:14 Config A/D Result=40 14:35:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:14 Get A/D filter: -9.255963e+061 result=40 14:35:14 Get A/D value=-858993460 result=40 14:35:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:35:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:35:14 Aux= 14:35:14 Message to Camera, serial 67836 queued 14:35:51 Received message from Master: op=PointingHead serial=67849 14:35:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:35:51 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:35:51 Point started: ret=0 14:35:51 point_skyscan result=0 14:35:52 Check angles 14:35:52 SkyScan query 14:35:53 SkyScan query done: ret=0 az=109.17<-7278 ze=38.475<-9435 Statuses=0009 0008 14:35:53 Msec=0 True Az=109.17 Ze=38.475 Az status=0009 Ze status=0008 14:35:53 Check angles [UTC 2018-12-11 14:35:53] 14:35:53 SkyScan query 14:35:53 SkyScan query done: ret=0 az=128.01<-8534 ze=38.505<-9433 Statuses=0009 0008 14:35:53 Msec=750 True Az=128.01 Ze=38.505 Az status=0009 Ze status=0008 14:35:54 Check angles 14:35:54 SkyScan query 14:35:54 SkyScan query done: ret=0 az=144.165<-9611 ze=38.505<-9433 Statuses=0009 0008 14:35:54 Msec=1500 True Az=144.165 Ze=38.505 Az status=0009 Ze status=0008 [UTC 2018-12-11 14:35:54] 14:35:54 Check angles 14:35:54 SkyScan query 14:35:55 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 14:35:55 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 14:35:55 Check angles 14:35:55 SkyScan query 14:35:56 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:35:56 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:35:56 Check angles 14:35:56 SkyScan query 14:35:56 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:35:56 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:35:56 Message to Master queued w/err=0: serial=67849 error=0 14:36:01 Received message from Master: op=Filter serial=67850 14:36:01 Color wheel filter change from 0 to 0 14:36:01 FLIGetFilterPos err=0 currentPosition=0 14:36:01 FLIGetStepsRemaining err=0 RemainingSteps=0 14:36:01 Filter is already there-color wheel unchanged 14:36:02 Received message from Master: op=Shutter serial=67851 14:36:02 Shutter LASER close 14:36:02 Received message from Camera: op=State serial=67853 14:36:02 GetSingleValue result=40 Value=cccccccc 14:36:02 SkyScan query 14:36:02 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:36:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:02 Parameters OK 14:36:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:02 Set A/D data flow result=40 14:36:02 Set A/D channel type result=40 14:36:02 Set A/D encoding result=40 14:36:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:02 Set channel filter=0.000000e+000 result=40 14:36:02 Config A/D Result=40 14:36:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:02 Get A/D filter: -9.255963e+061 result=40 14:36:02 Get A/D value=-858993460 result=40 14:36:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:02 Parameters OK 14:36:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:02 Set A/D data flow result=40 14:36:02 Set A/D channel type result=40 14:36:02 Set A/D encoding result=40 14:36:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:02 Set channel filter=0.000000e+000 result=40 14:36:02 Config A/D Result=40 14:36:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:02 Get A/D filter: -9.255963e+061 result=40 14:36:02 Get A/D value=-858993460 result=40 14:36:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:36:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:36:02 Aux= 14:36:02 Message to Camera, serial 67853 queued 14:36:39 Received message from Master: op=PointingHead serial=67866 14:36:39 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:36:39 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:36:39 Point started: ret=0 14:36:39 point_skyscan result=0 14:36:40 Check angles 14:36:40 SkyScan query 14:36:41 SkyScan query done: ret=0 az=152.925<-10195 ze=8.655<-11423 Statuses=0009 0009 14:36:41 Msec=0 True Az=152.925 Ze=8.655 Az status=0009 Ze status=0009 14:36:41 Check angles 14:36:41 SkyScan query 14:36:41 SkyScan query done: ret=0 az=135.495<-9033 ze=-12.315<-12821 Statuses=0009 0009 14:36:41 Msec=750 True Az=135.495 Ze=-12.315 Az status=0009 Ze status=0009 14:36:42 Check angles 14:36:42 SkyScan query 14:36:42 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.24<-14216 Statuses=0009 0009 14:36:42 Msec=1500 True Az=117.78 Ze=-33.24 Az status=0009 Ze status=0009 14:36:42 Check angles 14:36:42 SkyScan query 14:36:43 SkyScan query done: ret=0 az=100.155<-6677 ze=-51.555<-15437 Statuses=0009 0009 14:36:43 Msec=2250 True Az=100.155 Ze=-51.555 Az status=0009 Ze status=0009 14:36:43 Check angles 14:36:43 SkyScan query 14:36:44 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 14:36:44 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 14:36:44 Check angles 14:36:44 SkyScan query 14:36:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:36:44 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:36:44 Message to Master queued w/err=0: serial=67866 error=0 14:36:49 Received message from Master: op=Filter serial=67867 14:36:49 Color wheel filter change from 0 to 0 14:36:49 FLIGetFilterPos err=0 currentPosition=0 14:36:49 FLIGetStepsRemaining err=0 RemainingSteps=0 14:36:49 Filter is already there-color wheel unchanged 14:36:50 Received message from Master: op=Shutter serial=67868 14:36:50 Shutter LASER close 14:36:50 Received message from Camera: op=State serial=67870 14:36:50 GetSingleValue result=40 Value=cccccccc 14:36:50 SkyScan query 14:36:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:36:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:50 Parameters OK 14:36:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:50 Set A/D data flow result=40 14:36:50 Set A/D channel type result=40 14:36:50 Set A/D encoding result=40 14:36:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:50 Set channel filter=0.000000e+000 result=40 14:36:50 Config A/D Result=40 14:36:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:50 Get A/D filter: -9.255963e+061 result=40 14:36:50 Get A/D value=-858993460 result=40 14:36:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:50 Parameters OK 14:36:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:50 Set A/D data flow result=40 14:36:50 Set A/D channel type result=40 14:36:50 Set A/D encoding result=40 14:36:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:50 Set channel filter=0.000000e+000 result=40 14:36:50 Config A/D Result=40 14:36:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:50 Get A/D filter: -9.255963e+061 result=40 14:36:50 Get A/D value=-858993460 result=40 14:36:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:36:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:36:50 Aux= 14:36:50 Message to Camera, serial 67870 queued 14:37:27 Received message from Master: op=PointingHead serial=67883 14:37:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:37:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:37:27 Point started: ret=0 14:37:27 point_skyscan result=0 14:37:28 Check angles 14:37:28 SkyScan query 14:37:29 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.39<-17426 Statuses=0009 0009 14:37:29 Msec=0 True Az=109.17 Ze=-81.39 Az status=0009 Ze status=0009 14:37:29 Check angles 14:37:29 SkyScan query 14:37:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.36<-18824 Statuses=0008 0009 14:37:29 Msec=750 True Az=112.995 Ze=-102.36 Az status=0008 Ze status=0009 14:37:30 Check angles 14:37:30 SkyScan query 14:37:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.315<-20221 Statuses=0008 0009 14:37:30 Msec=1500 True Az=112.995 Ze=-123.315 Az status=0008 Ze status=0009 14:37:30 Check angles 14:37:30 SkyScan query 14:37:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.27<-21618 Statuses=0008 0009 14:37:31 Msec=2250 True Az=112.995 Ze=-144.27 Az status=0008 Ze status=0009 14:37:31 Check angles 14:37:31 SkyScan query 14:37:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.21<-23014 Statuses=0008 0009 14:37:32 Msec=3000 True Az=112.995 Ze=-165.21 Az status=0008 Ze status=0009 14:37:32 Check angles 14:37:32 SkyScan query 14:37:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:37:32 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:37:32 Message to Master queued w/err=0: serial=67883 error=0 14:37:37 Received message from Master: op=Filter serial=67884 14:37:37 Color wheel filter change from 0 to 0 14:37:37 FLIGetFilterPos err=0 currentPosition=0 14:37:37 FLIGetStepsRemaining err=0 RemainingSteps=0 14:37:37 Filter is already there-color wheel unchanged 14:37:38 Received message from Master: op=Shutter serial=67885 14:37:38 Shutter LASER open 14:37:38 Received message from Camera: op=State serial=67887 14:37:38 GetSingleValue result=40 Value=cccccccc 14:37:38 SkyScan query 14:37:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:37:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:38 Parameters OK 14:37:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:38 Set A/D data flow result=40 14:37:38 Set A/D channel type result=40 14:37:38 Set A/D encoding result=40 14:37:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:38 Set channel filter=0.000000e+000 result=40 14:37:38 Config A/D Result=40 14:37:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:38 Get A/D filter: -9.255963e+061 result=40 14:37:38 Get A/D value=-858993460 result=40 14:37:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:38 Parameters OK 14:37:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:38 Set A/D data flow result=40 14:37:38 Set A/D channel type result=40 14:37:38 Set A/D encoding result=40 14:37:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:38 Set channel filter=0.000000e+000 result=40 14:37:38 Config A/D Result=40 14:37:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:38 Get A/D filter: -9.255963e+061 result=40 14:37:38 Get A/D value=-858993460 result=40 14:37:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:37:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:37:38 Aux= 14:37:38 Message to Camera, serial 67887 queued 14:37:47 Received message from Master: op=Shutter serial=67897 14:37:47 Shutter LASER close 14:37:47 Received message from Master: op=PointingHead serial=67901 14:37:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:37:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:37:48 Point started: ret=0 14:37:48 point_skyscan result=0 14:37:48 Check angles 14:37:48 SkyScan query 14:37:49 SkyScan query done: ret=0 az=89.64<-5976 ze=156.825<-1545 Statuses=0009 0009 14:37:49 Msec=0 True Az=89.64 Ze=156.825 Az status=0009 Ze status=0009 14:37:49 Check angles 14:37:49 SkyScan query 14:37:50 SkyScan query done: ret=0 az=72.06<-4804 ze=135.87<-2942 Statuses=0009 0009 14:37:50 Msec=750 True Az=72.06 Ze=135.87 Az status=0009 Ze status=0009 14:37:50 Check angles 14:37:50 SkyScan query 14:37:51 SkyScan query done: ret=0 az=54.84<-3656 ze=114.9<-4340 Statuses=0009 0009 14:37:51 Msec=1500 True Az=54.84 Ze=114.9 Az status=0009 Ze status=0009 14:37:51 Check angles 14:37:51 SkyScan query 14:37:51 SkyScan query done: ret=0 az=40.89<-2726 ze=93.93<-5738 Statuses=0009 0009 14:37:51 Msec=2250 True Az=40.89 Ze=93.93 Az status=0009 Ze status=0009 14:37:51 Check angles 14:37:51 SkyScan query 14:37:52 SkyScan query done: ret=0 az=40.995<-2733 ze=72.96<-7136 Statuses=0008 0009 14:37:52 Msec=3000 True Az=40.995 Ze=72.96 Az status=0008 Ze status=0009 14:37:52 Check angles 14:37:52 SkyScan query 14:37:53 SkyScan query done: ret=0 az=40.995<-2733 ze=52.56<-8496 Statuses=0008 0009 14:37:53 Msec=3750 True Az=40.995 Ze=52.56 Az status=0008 Ze status=0009 14:37:53 Check angles 14:37:53 SkyScan query 14:37:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:37:54 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:37:54 Message to Master queued w/err=0: serial=67901 error=0 14:37:59 Received message from Master: op=Filter serial=67902 14:37:59 Color wheel filter change from 0 to 0 14:37:59 FLIGetFilterPos err=0 currentPosition=0 14:37:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:37:59 Filter is already there-color wheel unchanged 14:37:59 Received message from Master: op=Shutter serial=67903 14:37:59 Shutter LASER close 14:37:59 Received message from Camera: op=State serial=67905 14:37:59 GetSingleValue result=40 Value=cccccccc 14:37:59 SkyScan query 14:37:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:37:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:59 Parameters OK 14:37:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:59 Set A/D data flow result=40 14:37:59 Set A/D channel type result=40 14:37:59 Set A/D encoding result=40 14:37:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:59 Set channel filter=0.000000e+000 result=40 14:37:59 Config A/D Result=40 14:37:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:59 Get A/D filter: -9.255963e+061 result=40 14:37:59 Get A/D value=-858993460 result=40 14:37:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:59 Parameters OK 14:37:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:59 Set A/D data flow result=40 14:37:59 Set A/D channel type result=40 14:37:59 Set A/D encoding result=40 14:37:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:59 Set channel filter=0.000000e+000 result=40 14:37:59 Config A/D Result=40 14:37:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:59 Get A/D filter: -9.255963e+061 result=40 14:37:59 Get A/D value=-858993460 result=40 14:37:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:37:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:37:59 Aux= 14:37:59 Message to Camera, serial 67905 queued 14:38:36 Received message from Master: op=PointingHead serial=67918 14:38:36 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:38:36 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:38:37 Point started: ret=0 14:38:37 point_skyscan result=0 14:38:37 Check angles 14:38:37 SkyScan query 14:38:38 SkyScan query done: ret=0 az=63.99<-4266 ze=66.555<-7563 Statuses=0009 0008 14:38:38 Msec=0 True Az=63.99 Ze=66.555 Az status=0009 Ze status=0008 14:38:38 Check angles 14:38:38 SkyScan query 14:38:39 SkyScan query done: ret=0 az=81.3<-5420 ze=66.51<-7566 Statuses=0009 0008 14:38:39 Msec=750 True Az=81.3 Ze=66.51 Az status=0009 Ze status=0008 14:38:39 Check angles 14:38:39 SkyScan query 14:38:39 SkyScan query done: ret=0 az=98.94<-6596 ze=66.495<-7567 Statuses=0009 0008 14:38:39 Msec=1500 True Az=98.94 Ze=66.495 Az status=0009 Ze status=0008 14:38:40 Check angles 14:38:40 SkyScan query 14:38:40 SkyScan query done: ret=0 az=116.475<-7765 ze=66.495<-7567 Statuses=0009 0008 14:38:40 Msec=2250 True Az=116.475 Ze=66.495 Az status=0009 Ze status=0008 14:38:40 Check angles 14:38:40 SkyScan query 14:38:41 SkyScan query done: ret=0 az=134.025<-8935 ze=66.495<-7567 Statuses=0009 0008 14:38:41 Msec=3000 True Az=134.025 Ze=66.495 Az status=0009 Ze status=0008 14:38:41 Check angles 14:38:41 SkyScan query 14:38:42 SkyScan query done: ret=0 az=151.455<-10097 ze=66.495<-7567 Statuses=0009 0008 14:38:42 Msec=3750 True Az=151.455 Ze=66.495 Az status=0009 Ze status=0008 14:38:42 Check angles 14:38:42 SkyScan query 14:38:42 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:38:42 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 14:38:42 Message to Master queued w/err=0: serial=67918 error=0 14:38:47 Received message from Master: op=Filter serial=67919 14:38:47 Color wheel filter change from 0 to 0 14:38:47 FLIGetFilterPos err=0 currentPosition=0 14:38:47 FLIGetStepsRemaining err=0 RemainingSteps=0 14:38:47 Filter is already there-color wheel unchanged 14:38:48 Received message from Master: op=Shutter serial=67920 14:38:48 Shutter LASER close 14:38:48 Received message from Camera: op=State serial=67922 14:38:48 GetSingleValue result=40 Value=cccccccc 14:38:48 SkyScan query 14:38:48 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:38:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:48 Parameters OK 14:38:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:48 Set A/D data flow result=40 14:38:48 Set A/D channel type result=40 14:38:48 Set A/D encoding result=40 14:38:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:48 Set channel filter=0.000000e+000 result=40 14:38:48 Config A/D Result=40 14:38:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:48 Get A/D filter: -9.255963e+061 result=40 14:38:48 Get A/D value=-858993460 result=40 14:38:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:48 Parameters OK 14:38:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:48 Set A/D data flow result=40 14:38:48 Set A/D channel type result=40 14:38:48 Set A/D encoding result=40 14:38:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:48 Set channel filter=0.000000e+000 result=40 14:38:48 Config A/D Result=40 14:38:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:48 Get A/D filter: -9.255963e+061 result=40 14:38:48 Get A/D value=-858993460 result=40 14:38:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:48 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:38:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:38:48 Aux= 14:38:48 Message to Camera, serial 67922 queued 14:39:25 Received message from Master: op=PointingHead serial=67935 14:39:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:39:25 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:39:25 Point started: ret=0 14:39:25 point_skyscan result=0 14:39:26 Check angles 14:39:26 SkyScan query 14:39:27 SkyScan query done: ret=0 az=134.82<-8988 ze=36.6<-9560 Statuses=0009 0009 14:39:27 Msec=0 True Az=134.82 Ze=36.6 Az status=0009 Ze status=0009 14:39:27 Check angles 14:39:27 SkyScan query 14:39:28 SkyScan query done: ret=0 az=117.42<-7828 ze=15.69<-10954 Statuses=0009 0009 14:39:28 Msec=750 True Az=117.42 Ze=15.69 Az status=0009 Ze status=0009 14:39:28 Check angles 14:39:28 SkyScan query 14:39:28 SkyScan query done: ret=0 az=100.095<-6673 ze=-5.31<-12354 Statuses=0009 0009 14:39:28 Msec=1500 True Az=100.095 Ze=-5.31 Az status=0009 Ze status=0009 14:39:28 Check angles 14:39:28 SkyScan query 14:39:29 SkyScan query done: ret=0 az=82.44<-5496 ze=-26.235<-13749 Statuses=0009 0009 14:39:29 Msec=2250 True Az=82.44 Ze=-26.235 Az status=0009 Ze status=0009 14:39:29 Check angles 14:39:29 SkyScan query 14:39:30 SkyScan query done: ret=0 az=65.085<-4339 ze=-38.565<-14571 Statuses=0009 0008 14:39:30 Msec=3000 True Az=65.085 Ze=-38.565 Az status=0009 Ze status=0008 14:39:30 Check angles 14:39:30 SkyScan query 14:39:31 SkyScan query done: ret=0 az=47.19<-3146 ze=-38.535<-14569 Statuses=0009 0008 14:39:31 Msec=3750 True Az=47.19 Ze=-38.535 Az status=0009 Ze status=0008 14:39:31 Check angles 14:39:31 SkyScan query 14:39:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:39:31 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:39:31 Message to Master queued w/err=0: serial=67935 error=0 14:39:36 Received message from Master: op=Filter serial=67936 14:39:36 Color wheel filter change from 0 to 0 14:39:36 FLIGetFilterPos err=0 currentPosition=0 14:39:36 FLIGetStepsRemaining err=0 RemainingSteps=0 14:39:36 Filter is already there-color wheel unchanged 14:39:36 Received message from Master: op=Shutter serial=67937 14:39:36 Shutter LASER close 14:39:36 Received message from Camera: op=State serial=67939 14:39:36 GetSingleValue result=40 Value=cccccccc 14:39:36 SkyScan query 14:39:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:39:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:37 Parameters OK 14:39:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:37 Set A/D data flow result=40 14:39:37 Set A/D channel type result=40 14:39:37 Set A/D encoding result=40 14:39:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:37 Set channel filter=0.000000e+000 result=40 14:39:37 Config A/D Result=40 14:39:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:37 Get A/D filter: -9.255963e+061 result=40 14:39:37 Get A/D value=-858993460 result=40 14:39:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:37 Parameters OK 14:39:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:37 Set A/D data flow result=40 14:39:37 Set A/D channel type result=40 14:39:37 Set A/D encoding result=40 14:39:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:37 Set channel filter=0.000000e+000 result=40 14:39:37 Config A/D Result=40 14:39:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:37 Get A/D filter: -9.255963e+061 result=40 14:39:37 Get A/D value=-858993460 result=40 14:39:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:39:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:39:37 Aux= 14:39:37 Message to Camera, serial 67939 queued 14:40:14 Received message from Master: op=PointingHead serial=67952 14:40:14 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:40:14 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:40:14 Point started: ret=0 14:40:14 point_skyscan result=0 14:40:15 Check angles 14:40:15 SkyScan query 14:40:16 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.52<-16568 Statuses=0009 0009 14:40:16 Msec=0 True Az=64.425 Ze=-68.52 Az status=0009 Ze status=0009 14:40:16 Check angles 14:40:16 SkyScan query 14:40:16 SkyScan query done: ret=0 az=81.78<-5452 ze=-89.52<-17968 Statuses=0009 0009 14:40:16 Msec=750 True Az=81.78 Ze=-89.52 Az status=0009 Ze status=0009 14:40:17 Check angles 14:40:17 SkyScan query 14:40:17 SkyScan query done: ret=0 az=99.75<-6650 ze=-110.925<-19395 Statuses=0009 0009 14:40:17 Msec=1500 True Az=99.75 Ze=-110.925 Az status=0009 Ze status=0009 14:40:17 Check angles 14:40:17 SkyScan query 14:40:18 SkyScan query done: ret=0 az=117.555<-7837 ze=-132.24<-20816 Statuses=0009 0009 14:40:18 Msec=2250 True Az=117.555 Ze=-132.24 Az status=0009 Ze status=0009 14:40:18 Check angles 14:40:18 SkyScan query 14:40:19 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 14:40:19 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 14:40:19 Check angles 14:40:19 SkyScan query 14:40:19 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 14:40:19 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 14:40:19 Message to Master queued w/err=0: serial=67952 error=0 14:40:24 Received message from Master: op=Filter serial=67953 14:40:24 Color wheel filter change from 0 to 0 14:40:24 FLIGetFilterPos err=0 currentPosition=0 14:40:24 FLIGetStepsRemaining err=0 RemainingSteps=0 14:40:24 Filter is already there-color wheel unchanged 14:40:25 Received message from Master: op=Shutter serial=67954 14:40:25 Shutter LASER close 14:40:25 Received message from Camera: op=State serial=67956 14:40:25 GetSingleValue result=40 Value=cccccccc 14:40:25 SkyScan query 14:40:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:40:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:25 Parameters OK 14:40:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:25 Set A/D data flow result=40 14:40:25 Set A/D channel type result=40 14:40:25 Set A/D encoding result=40 14:40:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:25 Set channel filter=0.000000e+000 result=40 14:40:25 Config A/D Result=40 14:40:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:25 Get A/D filter: -9.255963e+061 result=40 14:40:25 Get A/D value=-858993460 result=40 14:40:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:25 Parameters OK 14:40:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:25 Set A/D data flow result=40 14:40:25 Set A/D channel type result=40 14:40:25 Set A/D encoding result=40 14:40:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:25 Set channel filter=0.000000e+000 result=40 14:40:25 Config A/D Result=40 14:40:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:25 Get A/D filter: -9.255963e+061 result=40 14:40:25 Get A/D value=-858993460 result=40 14:40:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:25 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:40:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:40:25 Aux= 14:40:25 Message to Camera, serial 67956 queued 14:41:02 Received message from Master: op=PointingHead serial=67969 14:41:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:41:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:41:02 Point started: ret=0 14:41:02 point_skyscan result=0 14:41:03 Check angles 14:41:03 SkyScan query 14:41:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.465<-23431 Statuses=0008 0009 14:41:04 Msec=0 True Az=112.995 Ze=-171.465 Az status=0008 Ze status=0009 14:41:04 Check angles 14:41:04 SkyScan query 14:41:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:41:04 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:41:04 Message to Master queued w/err=0: serial=67969 error=0 14:41:09 Received message from Master: op=Filter serial=67970 14:41:09 Color wheel filter change from 0 to 0 14:41:09 FLIGetFilterPos err=0 currentPosition=0 14:41:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:41:09 Filter is already there-color wheel unchanged 14:41:10 Received message from Master: op=Shutter serial=67971 14:41:10 Shutter LASER open 14:41:10 Received message from Camera: op=State serial=67973 14:41:10 GetSingleValue result=40 Value=cccccccc 14:41:10 SkyScan query 14:41:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:41:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:10 Parameters OK 14:41:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:10 Set A/D data flow result=40 14:41:10 Set A/D channel type result=40 14:41:10 Set A/D encoding result=40 14:41:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:10 Set channel filter=0.000000e+000 result=40 14:41:10 Config A/D Result=40 14:41:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:10 Get A/D filter: -9.255963e+061 result=40 14:41:10 Get A/D value=-858993460 result=40 14:41:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:10 Parameters OK 14:41:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:10 Set A/D data flow result=40 14:41:10 Set A/D channel type result=40 14:41:10 Set A/D encoding result=40 14:41:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:10 Set channel filter=0.000000e+000 result=40 14:41:10 Config A/D Result=40 14:41:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:10 Get A/D filter: -9.255963e+061 result=40 14:41:10 Get A/D value=-858993460 result=40 14:41:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:41:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:41:10 Aux= 14:41:10 Message to Camera, serial 67973 queued 14:41:19 Received message from Master: op=Shutter serial=67983 14:41:19 Shutter LASER close 14:41:19 Received message from Master: op=PointingHead serial=67987 14:41:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:41:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:41:20 Point started: ret=0 14:41:20 point_skyscan result=0 14:41:21 Check angles 14:41:21 SkyScan query 14:41:21 SkyScan query done: ret=0 az=136.335<-9089 ze=-142.86<-21524 Statuses=0009 0009 14:41:21 Msec=0 True Az=136.335 Ze=-142.86 Az status=0009 Ze status=0009 14:41:21 Check angles 14:41:21 SkyScan query 14:41:22 SkyScan query done: ret=0 az=154.2<-10280 ze=-121.485<-20099 Statuses=0009 0009 14:41:22 Msec=750 True Az=154.2 Ze=-121.485 Az status=0009 Ze status=0009 14:41:22 Check angles 14:41:22 SkyScan query 14:41:23 SkyScan query done: ret=0 az=171.69<-11446 ze=-100.44<-18696 Statuses=0009 0009 14:41:23 Msec=1500 True Az=171.69 Ze=-100.44 Az status=0009 Ze status=0009 14:41:23 Check angles 14:41:23 SkyScan query 14:41:23 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.56<-17304 Statuses=0008 0009 14:41:23 Msec=2250 True Az=176.025 Ze=-79.56 Az status=0008 Ze status=0009 14:41:24 Check angles 14:41:24 SkyScan query 14:41:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.14<-15876 Statuses=0008 0009 14:41:24 Msec=3000 True Az=175.995 Ze=-58.14 Az status=0008 Ze status=0009 14:41:24 Check angles 14:41:24 SkyScan query 14:41:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 14:41:25 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 14:41:25 Message to Master queued w/err=0: serial=67987 error=0 14:41:30 Received message from Master: op=Filter serial=67988 14:41:30 Color wheel filter change from 0 to 0 14:41:30 FLIGetFilterPos err=0 currentPosition=0 14:41:30 FLIGetStepsRemaining err=0 RemainingSteps=0 14:41:30 Filter is already there-color wheel unchanged 14:41:30 Received message from Master: op=Shutter serial=67989 14:41:30 Shutter LASER close 14:41:30 Received message from Camera: op=State serial=67991 14:41:30 GetSingleValue result=40 Value=cccccccc 14:41:30 SkyScan query 14:41:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:41:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:31 Parameters OK 14:41:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:31 Set A/D data flow result=40 14:41:31 Set A/D channel type result=40 14:41:31 Set A/D encoding result=40 14:41:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:31 Set channel filter=0.000000e+000 result=40 14:41:31 Config A/D Result=40 14:41:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:31 Get A/D filter: -9.255963e+061 result=40 14:41:31 Get A/D value=-858993460 result=40 14:41:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:31 Parameters OK 14:41:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:31 Set A/D data flow result=40 14:41:31 Set A/D channel type result=40 14:41:31 Set A/D encoding result=40 14:41:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:31 Set channel filter=0.000000e+000 result=40 14:41:31 Config A/D Result=40 14:41:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:31 Get A/D filter: -9.255963e+061 result=40 14:41:31 Get A/D value=-858993460 result=40 14:41:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:41:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:41:31 Aux= 14:41:31 Message to Camera, serial 67991 queued 14:42:08 Received message from Master: op=PointingHead serial=68004 14:42:08 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:42:08 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:42:08 Point started: ret=0 14:42:08 point_skyscan result=0 14:42:09 Check angles 14:42:09 SkyScan query 14:42:09 SkyScan query done: ret=0 az=152.685<-10179 ze=-21.3<-13420 Statuses=0009 0009 14:42:09 Msec=0 True Az=152.685 Ze=-21.3 Az status=0009 Ze status=0009 14:42:09 Check angles 14:42:09 SkyScan query 14:42:10 SkyScan query done: ret=0 az=135.21<-9014 ze=-0.33<-12022 Statuses=0009 0009 14:42:10 Msec=750 True Az=135.21 Ze=-0.33 Az status=0009 Ze status=0009 14:42:10 Check angles 14:42:10 SkyScan query 14:42:11 SkyScan query done: ret=0 az=117.225<-7815 ze=21.06<-10596 Statuses=0009 0009 14:42:11 Msec=1500 True Az=117.225 Ze=21.06 Az status=0009 Ze status=0009 14:42:11 Check angles 14:42:11 SkyScan query 14:42:12 SkyScan query done: ret=0 az=99.945<-6663 ze=41.985<-9201 Statuses=0009 0009 14:42:12 Msec=2250 True Az=99.945 Ze=41.985 Az status=0009 Ze status=0009 14:42:12 Check angles 14:42:12 SkyScan query 14:42:12 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 14:42:12 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 14:42:13 Check angles 14:42:13 SkyScan query 14:42:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:42:13 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:42:13 Message to Master queued w/err=0: serial=68004 error=0 14:42:18 Received message from Master: op=Filter serial=68005 14:42:18 Color wheel filter change from 0 to 0 14:42:18 FLIGetFilterPos err=0 currentPosition=0 14:42:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:42:18 Filter is already there-color wheel unchanged 14:42:18 Received message from Master: op=Shutter serial=68006 14:42:18 Shutter LASER close 14:42:18 Received message from Camera: op=State serial=68008 14:42:18 GetSingleValue result=40 Value=cccccccc 14:42:18 SkyScan query 14:42:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:42:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:19 Parameters OK 14:42:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:19 Set A/D data flow result=40 14:42:19 Set A/D channel type result=40 14:42:19 Set A/D encoding result=40 14:42:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:19 Set channel filter=0.000000e+000 result=40 14:42:19 Config A/D Result=40 14:42:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:19 Get A/D filter: -9.255963e+061 result=40 14:42:19 Get A/D value=-858993460 result=40 14:42:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:19 Parameters OK 14:42:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:19 Set A/D data flow result=40 14:42:19 Set A/D channel type result=40 14:42:19 Set A/D encoding result=40 14:42:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:19 Set channel filter=0.000000e+000 result=40 14:42:19 Config A/D Result=40 14:42:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:19 Get A/D filter: -9.255963e+061 result=40 14:42:19 Get A/D value=-858993460 result=40 14:42:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:42:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:42:19 Aux= 14:42:19 Message to Camera, serial 68008 queued 14:42:56 Received message from Master: op=PointingHead serial=68021 14:42:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:42:56 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:42:56 Point started: ret=0 14:42:56 point_skyscan result=0 14:42:57 Check angles 14:42:57 SkyScan query 14:42:57 SkyScan query done: ret=0 az=109.215<-7281 ze=38.49<-9434 Statuses=0009 0008 14:42:57 Msec=0 True Az=109.215 Ze=38.49 Az status=0009 Ze status=0008 14:42:58 Check angles 14:42:58 SkyScan query 14:42:58 SkyScan query done: ret=0 az=126.75<-8450 ze=38.505<-9433 Statuses=0009 0008 14:42:58 Msec=750 True Az=126.75 Ze=38.505 Az status=0009 Ze status=0008 14:42:58 Check angles 14:42:58 SkyScan query 14:42:59 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 14:42:59 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 14:42:59 Check angles 14:42:59 SkyScan query 14:43:00 SkyScan query done: ret=0 az=162<-10800 ze=38.505<-9433 Statuses=0009 0008 14:43:00 Msec=2250 True Az=162 Ze=38.505 Az status=0009 Ze status=0008 14:43:00 Check angles 14:43:00 SkyScan query 14:43:01 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:43:01 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:43:01 Check angles 14:43:01 SkyScan query 14:43:01 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:43:01 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:43:01 Message to Master queued w/err=0: serial=68021 error=0 14:43:06 Received message from Master: op=Filter serial=68022 14:43:06 Color wheel filter change from 0 to 0 14:43:06 FLIGetFilterPos err=0 currentPosition=0 14:43:06 FLIGetStepsRemaining err=0 RemainingSteps=0 14:43:06 Filter is already there-color wheel unchanged 14:43:06 Received message from Master: op=Shutter serial=68023 14:43:06 Shutter LASER close 14:43:06 Received message from Camera: op=State serial=68025 14:43:06 GetSingleValue result=40 Value=cccccccc 14:43:06 SkyScan query 14:43:07 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:43:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:07 Parameters OK 14:43:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:07 Set A/D data flow result=40 14:43:07 Set A/D channel type result=40 14:43:07 Set A/D encoding result=40 14:43:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:07 Set channel filter=0.000000e+000 result=40 14:43:07 Config A/D Result=40 14:43:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:07 Get A/D filter: -9.255963e+061 result=40 14:43:07 Get A/D value=-858993460 result=40 14:43:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:07 Parameters OK 14:43:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:07 Set A/D data flow result=40 14:43:07 Set A/D channel type result=40 14:43:07 Set A/D encoding result=40 14:43:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:07 Set channel filter=0.000000e+000 result=40 14:43:07 Config A/D Result=40 14:43:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:07 Get A/D filter: -9.255963e+061 result=40 14:43:07 Get A/D value=-858993460 result=40 14:43:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:43:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:43:07 Aux= 14:43:07 Message to Camera, serial 68025 queued 14:43:43 Received message from Master: op=PointingHead serial=68037 14:43:43 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:43:43 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:43:43 Point started: ret=0 14:43:43 point_skyscan result=0 14:43:44 Check angles 14:43:44 SkyScan query 14:43:45 SkyScan query done: ret=0 az=152.7<-10180 ze=8.49<-11434 Statuses=0009 0009 14:43:45 Msec=0 True Az=152.7 Ze=8.49 Az status=0009 Ze status=0009 14:43:45 Check angles 14:43:45 SkyScan query 14:43:45 SkyScan query done: ret=0 az=135.39<-9026 ze=-12.51<-12834 Statuses=0009 0009 14:43:45 Msec=750 True Az=135.39 Ze=-12.51 Az status=0009 Ze status=0009 14:43:46 Check angles 14:43:46 SkyScan query 14:43:46 SkyScan query done: ret=0 az=117.435<-7829 ze=-33.87<-14258 Statuses=0009 0009 14:43:46 Msec=1500 True Az=117.435 Ze=-33.87 Az status=0009 Ze status=0009 14:43:46 Check angles 14:43:46 SkyScan query 14:43:47 SkyScan query done: ret=0 az=100.095<-6673 ze=-51.57<-15438 Statuses=0009 0009 14:43:47 Msec=2250 True Az=100.095 Ze=-51.57 Az status=0009 Ze status=0009 14:43:47 Check angles 14:43:47 SkyScan query 14:43:48 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 14:43:48 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 14:43:48 Check angles 14:43:48 SkyScan query 14:43:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:43:48 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:43:48 Message to Master queued w/err=0: serial=68037 error=0 14:43:53 Received message from Master: op=Filter serial=68038 14:43:53 Color wheel filter change from 0 to 0 14:43:53 FLIGetFilterPos err=0 currentPosition=0 14:43:53 FLIGetStepsRemaining err=0 RemainingSteps=0 14:43:53 Filter is already there-color wheel unchanged 14:43:54 Received message from Master: op=Shutter serial=68039 14:43:54 Shutter LASER close 14:43:54 Received message from Camera: op=State serial=68041 14:43:54 GetSingleValue result=40 Value=cccccccc 14:43:54 SkyScan query 14:43:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:43:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:54 Parameters OK 14:43:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:54 Set A/D data flow result=40 14:43:54 Set A/D channel type result=40 14:43:54 Set A/D encoding result=40 14:43:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:54 Set channel filter=0.000000e+000 result=40 14:43:54 Config A/D Result=40 14:43:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:54 Get A/D filter: -9.255963e+061 result=40 14:43:54 Get A/D value=-858993460 result=40 14:43:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:54 Parameters OK 14:43:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:54 Set A/D data flow result=40 14:43:54 Set A/D channel type result=40 14:43:54 Set A/D encoding result=40 14:43:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:54 Set channel filter=0.000000e+000 result=40 14:43:54 Config A/D Result=40 14:43:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:54 Get A/D filter: -9.255963e+061 result=40 14:43:54 Get A/D value=-858993460 result=40 14:43:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:54 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:43:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:43:54 Aux= 14:43:54 Message to Camera, serial 68041 queued 14:44:31 Received message from Master: op=PointingHead serial=68054 14:44:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:44:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:44:31 Point started: ret=0 14:44:31 point_skyscan result=0 14:44:32 Check angles 14:44:32 SkyScan query 14:44:33 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.315<-17421 Statuses=0009 0009 14:44:33 Msec=0 True Az=109.185 Ze=-81.315 Az status=0009 Ze status=0009 14:44:33 Check angles 14:44:33 SkyScan query 14:44:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.285<-18819 Statuses=0008 0009 14:44:33 Msec=750 True Az=112.995 Ze=-102.285 Az status=0008 Ze status=0009 14:44:34 Check angles 14:44:34 SkyScan query 14:44:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.225<-20215 Statuses=0008 0009 14:44:34 Msec=1500 True Az=112.995 Ze=-123.225 Az status=0008 Ze status=0009 14:44:34 Check angles 14:44:34 SkyScan query 14:44:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.195<-21613 Statuses=0008 0009 14:44:35 Msec=2250 True Az=112.995 Ze=-144.195 Az status=0008 Ze status=0009 14:44:35 Check angles 14:44:35 SkyScan query 14:44:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.135<-23009 Statuses=0008 0009 14:44:36 Msec=3000 True Az=112.995 Ze=-165.135 Az status=0008 Ze status=0009 14:44:36 Check angles 14:44:36 SkyScan query 14:44:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:44:36 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:44:36 Message to Master queued w/err=0: serial=68054 error=0 14:44:41 Received message from Master: op=Filter serial=68055 14:44:41 Color wheel filter change from 0 to 0 14:44:41 FLIGetFilterPos err=0 currentPosition=0 14:44:41 FLIGetStepsRemaining err=0 RemainingSteps=0 14:44:41 Filter is already there-color wheel unchanged 14:44:42 Received message from Master: op=Shutter serial=68056 14:44:42 Shutter LASER open 14:44:42 Received message from Camera: op=State serial=68058 14:44:42 GetSingleValue result=40 Value=cccccccc 14:44:42 SkyScan query 14:44:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:44:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:42 Parameters OK 14:44:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:42 Set A/D data flow result=40 14:44:42 Set A/D channel type result=40 14:44:42 Set A/D encoding result=40 14:44:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:42 Set channel filter=0.000000e+000 result=40 14:44:42 Config A/D Result=40 14:44:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:42 Get A/D filter: -9.255963e+061 result=40 14:44:42 Get A/D value=-858993460 result=40 14:44:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:42 Parameters OK 14:44:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:42 Set A/D data flow result=40 14:44:42 Set A/D channel type result=40 14:44:42 Set A/D encoding result=40 14:44:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:42 Set channel filter=0.000000e+000 result=40 14:44:42 Config A/D Result=40 14:44:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:42 Get A/D filter: -9.255963e+061 result=40 14:44:42 Get A/D value=-858993460 result=40 14:44:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:44:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:44:42 Aux= 14:44:42 Message to Camera, serial 68058 queued 14:44:51 Received message from Master: op=Shutter serial=68068 14:44:51 Shutter LASER close 14:44:51 Received message from Master: op=PointingHead serial=68072 14:44:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:44:51 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:44:52 Point started: ret=0 14:44:52 point_skyscan result=0 14:44:52 Check angles 14:44:52 SkyScan query 14:44:53 SkyScan query done: ret=0 az=89.895<-5993 ze=157.215<-1519 Statuses=0009 0009 14:44:53 Msec=0 True Az=89.895 Ze=157.215 Az status=0009 Ze status=0009 14:44:53 Check angles 14:44:53 SkyScan query 14:44:54 SkyScan query done: ret=0 az=72.015<-4801 ze=135.81<-2946 Statuses=0009 0009 14:44:54 Msec=750 True Az=72.015 Ze=135.81 Az status=0009 Ze status=0009 14:44:54 Check angles 14:44:54 SkyScan query 14:44:54 SkyScan query done: ret=0 az=54.78<-3652 ze=114.84<-4344 Statuses=0009 0009 14:44:54 Msec=1500 True Az=54.78 Ze=114.84 Az status=0009 Ze status=0009 14:44:55 Check angles 14:44:55 SkyScan query 14:44:55 SkyScan query done: ret=0 az=40.89<-2726 ze=93.9<-5740 Statuses=0009 0009 14:44:55 Msec=2250 True Az=40.89 Ze=93.9 Az status=0009 Ze status=0009 14:44:55 Check angles 14:44:55 SkyScan query 14:44:56 SkyScan query done: ret=0 az=40.995<-2733 ze=72.9<-7140 Statuses=0008 0009 14:44:56 Msec=3000 True Az=40.995 Ze=72.9 Az status=0008 Ze status=0009 14:44:56 Check angles 14:44:56 SkyScan query 14:44:57 SkyScan query done: ret=0 az=40.995<-2733 ze=52.53<-8498 Statuses=0008 0009 14:44:57 Msec=3750 True Az=40.995 Ze=52.53 Az status=0008 Ze status=0009 14:44:57 Check angles 14:44:57 SkyScan query 14:44:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:44:57 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:44:57 Message to Master queued w/err=0: serial=68072 error=0 14:45:02 Received message from Master: op=Filter serial=68073 14:45:02 Color wheel filter change from 0 to 0 14:45:02 FLIGetFilterPos err=0 currentPosition=0 14:45:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:02 Filter is already there-color wheel unchanged 14:45:03 Received message from Master: op=Shutter serial=68074 14:45:03 Shutter LASER close 14:45:03 Received message from Camera: op=State serial=68076 14:45:03 GetSingleValue result=40 Value=cccccccc 14:45:03 SkyScan query 14:45:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:45:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:03 Parameters OK 14:45:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:03 Set A/D data flow result=40 14:45:03 Set A/D channel type result=40 14:45:03 Set A/D encoding result=40 14:45:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:03 Set channel filter=0.000000e+000 result=40 14:45:03 Config A/D Result=40 14:45:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:03 Get A/D filter: -9.255963e+061 result=40 14:45:03 Get A/D value=-858993460 result=40 14:45:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:03 Parameters OK 14:45:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:03 Set A/D data flow result=40 14:45:03 Set A/D channel type result=40 14:45:03 Set A/D encoding result=40 14:45:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:03 Set channel filter=0.000000e+000 result=40 14:45:03 Config A/D Result=40 14:45:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:03 Get A/D filter: -9.255963e+061 result=40 14:45:03 Get A/D value=-858993460 result=40 14:45:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:45:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:45:03 Aux= 14:45:03 Message to Camera, serial 68076 queued 14:45:29 Received message from Master: op=Identify serial=68077 14:45:40 Received message from Master: op=PointingHead serial=68092 14:45:40 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:45:40 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:45:41 Point started: ret=0 14:45:41 point_skyscan result=0 14:45:41 Check angles 14:45:41 SkyScan query 14:45:42 SkyScan query done: ret=0 az=63.96<-4264 ze=66.555<-7563 Statuses=0009 0008 14:45:42 Msec=0 True Az=63.96 Ze=66.555 Az status=0009 Ze status=0008 14:45:42 Check angles 14:45:42 SkyScan query 14:45:43 SkyScan query done: ret=0 az=81.315<-5421 ze=66.495<-7567 Statuses=0009 0008 14:45:43 Msec=750 True Az=81.315 Ze=66.495 Az status=0009 Ze status=0008 14:45:43 Check angles 14:45:43 SkyScan query [UTC 2018-12-11 14:45:43] 14:45:43 SkyScan query done: ret=0 az=98.895<-6593 ze=66.495<-7567 Statuses=0009 0008 14:45:43 Msec=1500 True Az=98.895 Ze=66.495 Az status=0009 Ze status=0008 14:45:44 Check angles 14:45:44 SkyScan query 14:45:44 SkyScan query done: ret=0 az=116.52<-7768 ze=66.495<-7567 Statuses=0009 0008 14:45:44 Msec=2250 True Az=116.52 Ze=66.495 Az status=0009 Ze status=0008 14:45:44 Check angles 14:45:44 SkyScan query 14:45:45 SkyScan query done: ret=0 az=134.325<-8955 ze=66.495<-7567 Statuses=0009 0008 14:45:45 Msec=3000 True Az=134.325 Ze=66.495 Az status=0009 Ze status=0008 14:45:45 Check angles 14:45:45 SkyScan query 14:45:46 SkyScan query done: ret=0 az=151.845<-10123 ze=66.495<-7567 Statuses=0009 0008 14:45:46 Msec=3750 True Az=151.845 Ze=66.495 Az status=0009 Ze status=0008 14:45:46 Check angles 14:45:46 SkyScan query 14:45:46 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:45:46 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 14:45:46 Message to Master queued w/err=0: serial=68092 error=0 14:45:51 Received message from Master: op=Filter serial=68093 14:45:51 Color wheel filter change from 0 to 0 14:45:51 FLIGetFilterPos err=0 currentPosition=0 14:45:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:51 Filter is already there-color wheel unchanged 14:45:52 Received message from Master: op=Shutter serial=68094 14:45:52 Shutter LASER close 14:45:52 Received message from Camera: op=State serial=68096 14:45:52 GetSingleValue result=40 Value=cccccccc 14:45:52 SkyScan query 14:45:52 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:45:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:52 Parameters OK 14:45:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:52 Set A/D data flow result=40 14:45:52 Set A/D channel type result=40 14:45:52 Set A/D encoding result=40 14:45:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:52 Set channel filter=0.000000e+000 result=40 14:45:52 Config A/D Result=40 14:45:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:52 Get A/D filter: -9.255963e+061 result=40 14:45:52 Get A/D value=-858993460 result=40 14:45:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:52 Parameters OK 14:45:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:52 Set A/D data flow result=40 14:45:52 Set A/D channel type result=40 14:45:52 Set A/D encoding result=40 14:45:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:52 Set channel filter=0.000000e+000 result=40 14:45:52 Config A/D Result=40 14:45:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:52 Get A/D filter: -9.255963e+061 result=40 14:45:52 Get A/D value=-858993460 result=40 14:45:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:52 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:45:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:45:52 Aux= 14:45:52 Message to Camera, serial 68096 queued 14:46:29 Received message from Master: op=PointingHead serial=68109 14:46:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:46:29 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:46:29 Point started: ret=0 14:46:29 point_skyscan result=0 14:46:30 Check angles 14:46:30 SkyScan query 14:46:31 SkyScan query done: ret=0 az=135.135<-9009 ze=36.9<-9540 Statuses=0009 0009 14:46:31 Msec=0 True Az=135.135 Ze=36.9 Az status=0009 Ze status=0009 14:46:31 Check angles 14:46:31 SkyScan query 14:46:31 SkyScan query done: ret=0 az=117.735<-7849 ze=15.945<-10937 Statuses=0009 0009 14:46:31 Msec=750 True Az=117.735 Ze=15.945 Az status=0009 Ze status=0009 14:46:32 Check angles 14:46:32 SkyScan query 14:46:32 SkyScan query done: ret=0 az=100.335<-6689 ze=-5.025<-12335 Statuses=0009 0009 14:46:32 Msec=1500 True Az=100.335 Ze=-5.025 Az status=0009 Ze status=0009 14:46:32 Check angles 14:46:32 SkyScan query 14:46:33 SkyScan query done: ret=0 az=82.8<-5520 ze=-25.965<-13731 Statuses=0009 0009 14:46:33 Msec=2250 True Az=82.8 Ze=-25.965 Az status=0009 Ze status=0009 14:46:33 Check angles 14:46:33 SkyScan query 14:46:34 SkyScan query done: ret=0 az=64.83<-4322 ze=-38.58<-14572 Statuses=0009 0008 14:46:34 Msec=3000 True Az=64.83 Ze=-38.58 Az status=0009 Ze status=0008 14:46:34 Check angles 14:46:34 SkyScan query 14:46:34 SkyScan query done: ret=0 az=47.505<-3167 ze=-38.535<-14569 Statuses=0009 0008 14:46:34 Msec=3750 True Az=47.505 Ze=-38.535 Az status=0009 Ze status=0008 14:46:35 Check angles 14:46:35 SkyScan query 14:46:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:46:35 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:46:35 Message to Master queued w/err=0: serial=68109 error=0 14:46:40 Received message from Master: op=Filter serial=68110 14:46:40 Color wheel filter change from 0 to 0 14:46:40 FLIGetFilterPos err=0 currentPosition=0 14:46:40 FLIGetStepsRemaining err=0 RemainingSteps=0 14:46:40 Filter is already there-color wheel unchanged 14:46:40 Received message from Master: op=Shutter serial=68111 14:46:40 Shutter LASER close 14:46:40 Received message from Camera: op=State serial=68113 14:46:40 GetSingleValue result=40 Value=cccccccc 14:46:40 SkyScan query 14:46:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:46:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:41 Parameters OK 14:46:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:41 Set A/D data flow result=40 14:46:41 Set A/D channel type result=40 14:46:41 Set A/D encoding result=40 14:46:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:41 Set channel filter=0.000000e+000 result=40 14:46:41 Config A/D Result=40 14:46:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:41 Get A/D filter: -9.255963e+061 result=40 14:46:41 Get A/D value=-858993460 result=40 14:46:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:41 Parameters OK 14:46:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:41 Set A/D data flow result=40 14:46:41 Set A/D channel type result=40 14:46:41 Set A/D encoding result=40 14:46:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:41 Set channel filter=0.000000e+000 result=40 14:46:41 Config A/D Result=40 14:46:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:41 Get A/D filter: -9.255963e+061 result=40 14:46:41 Get A/D value=-858993460 result=40 14:46:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:46:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:46:41 Aux= 14:46:41 Message to Camera, serial 68113 queued 14:47:18 Received message from Master: op=PointingHead serial=68126 14:47:18 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:47:18 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:47:18 Point started: ret=0 14:47:18 point_skyscan result=0 14:47:19 Check angles 14:47:19 SkyScan query 14:47:20 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.085<-16539 Statuses=0009 0009 14:47:20 Msec=0 True Az=63.87 Ze=-68.085 Az status=0009 Ze status=0009 14:47:20 Check angles 14:47:20 SkyScan query 14:47:20 SkyScan query done: ret=0 az=81.285<-5419 ze=-89.085<-17939 Statuses=0009 0009 14:47:20 Msec=750 True Az=81.285 Ze=-89.085 Az status=0009 Ze status=0009 14:47:20 Check angles 14:47:20 SkyScan query 14:47:21 SkyScan query done: ret=0 az=98.85<-6590 ze=-110.01<-19334 Statuses=0009 0009 14:47:21 Msec=1500 True Az=98.85 Ze=-110.01 Az status=0009 Ze status=0009 14:47:21 Check angles 14:47:21 SkyScan query 14:47:22 SkyScan query done: ret=0 az=116.4<-7760 ze=-130.995<-20733 Statuses=0009 0009 14:47:22 Msec=2250 True Az=116.4 Ze=-130.995 Az status=0009 Ze status=0009 14:47:22 Check angles 14:47:22 SkyScan query 14:47:23 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.555<-21437 Statuses=0009 0008 14:47:23 Msec=3000 True Az=131.175 Ze=-141.555 Az status=0009 Ze status=0008 14:47:23 Check angles 14:47:23 SkyScan query 14:47:23 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 14:47:23 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 14:47:23 Message to Master queued w/err=0: serial=68126 error=0 14:47:28 Received message from Master: op=Filter serial=68127 14:47:28 Color wheel filter change from 0 to 0 14:47:28 FLIGetFilterPos err=0 currentPosition=0 14:47:28 FLIGetStepsRemaining err=0 RemainingSteps=0 14:47:28 Filter is already there-color wheel unchanged 14:47:28 Received message from Master: op=Shutter serial=68128 14:47:28 Shutter LASER close 14:47:28 Received message from Camera: op=State serial=68130 14:47:28 GetSingleValue result=40 Value=cccccccc 14:47:28 SkyScan query 14:47:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:47:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:29 Parameters OK 14:47:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:29 Set A/D data flow result=40 14:47:29 Set A/D channel type result=40 14:47:29 Set A/D encoding result=40 14:47:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:29 Set channel filter=0.000000e+000 result=40 14:47:29 Config A/D Result=40 14:47:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:29 Get A/D filter: -9.255963e+061 result=40 14:47:29 Get A/D value=-858993460 result=40 14:47:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:29 Parameters OK 14:47:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:29 Set A/D data flow result=40 14:47:29 Set A/D channel type result=40 14:47:29 Set A/D encoding result=40 14:47:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:29 Set channel filter=0.000000e+000 result=40 14:47:29 Config A/D Result=40 14:47:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:29 Get A/D filter: -9.255963e+061 result=40 14:47:29 Get A/D value=-858993460 result=40 14:47:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:29 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:47:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:47:29 Aux= 14:47:29 Message to Camera, serial 68130 queued 14:48:05 Received message from Master: op=PointingHead serial=68142 14:48:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:48:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:48:05 Point started: ret=0 14:48:05 point_skyscan result=0 14:48:06 Check angles 14:48:06 SkyScan query 14:48:07 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 14:48:07 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 14:48:07 Check angles 14:48:07 SkyScan query 14:48:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:48:07 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:48:07 Message to Master queued w/err=0: serial=68142 error=0 14:48:12 Received message from Master: op=Filter serial=68143 14:48:12 Color wheel filter change from 0 to 0 14:48:12 FLIGetFilterPos err=0 currentPosition=0 14:48:12 FLIGetStepsRemaining err=0 RemainingSteps=0 14:48:12 Filter is already there-color wheel unchanged 14:48:13 Received message from Master: op=Shutter serial=68144 14:48:13 Shutter LASER open 14:48:13 Received message from Camera: op=State serial=68146 14:48:13 GetSingleValue result=40 Value=cccccccc 14:48:13 SkyScan query 14:48:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:48:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:13 Parameters OK 14:48:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:13 Set A/D data flow result=40 14:48:13 Set A/D channel type result=40 14:48:13 Set A/D encoding result=40 14:48:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:13 Set channel filter=0.000000e+000 result=40 14:48:13 Config A/D Result=40 14:48:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:13 Get A/D filter: -9.255963e+061 result=40 14:48:13 Get A/D value=-858993460 result=40 14:48:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:13 Parameters OK 14:48:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:13 Set A/D data flow result=40 14:48:13 Set A/D channel type result=40 14:48:13 Set A/D encoding result=40 14:48:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:13 Set channel filter=0.000000e+000 result=40 14:48:13 Config A/D Result=40 14:48:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:13 Get A/D filter: -9.255963e+061 result=40 14:48:13 Get A/D value=-858993460 result=40 14:48:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:48:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:48:13 Aux= 14:48:13 Message to Camera, serial 68146 queued 14:48:22 Received message from Master: op=Shutter serial=68156 14:48:22 Shutter LASER close 14:48:22 Received message from Master: op=PointingHead serial=68160 14:48:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:48:22 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:48:23 Point started: ret=0 14:48:23 point_skyscan result=0 14:48:23 Check angles 14:48:23 SkyScan query 14:48:24 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.205<-21547 Statuses=0009 0009 14:48:24 Msec=0 True Az=135.945 Ze=-143.205 Az status=0009 Ze status=0009 14:48:24 Check angles 14:48:24 SkyScan query 14:48:25 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.25<-20150 Statuses=0009 0009 14:48:25 Msec=750 True Az=153.435 Ze=-122.25 Az status=0009 Ze status=0009 14:48:25 Check angles 14:48:25 SkyScan query 14:48:26 SkyScan query done: ret=0 az=170.865<-11391 ze=-101.325<-18755 Statuses=0009 0009 14:48:26 Msec=1500 True Az=170.865 Ze=-101.325 Az status=0009 Ze status=0009 14:48:26 Check angles 14:48:26 SkyScan query 14:48:26 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.34<-17356 Statuses=0008 0009 14:48:26 Msec=2250 True Az=176.025 Ze=-80.34 Az status=0008 Ze status=0009 14:48:26 Check angles 14:48:26 SkyScan query 14:48:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.4<-15960 Statuses=0008 0009 14:48:27 Msec=3000 True Az=176.01 Ze=-59.4 Az status=0008 Ze status=0009 14:48:27 Check angles 14:48:27 SkyScan query 14:48:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:48:28 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:48:28 Message to Master queued w/err=0: serial=68160 error=0 14:48:33 Received message from Master: op=Filter serial=68161 14:48:33 Color wheel filter change from 0 to 0 14:48:33 FLIGetFilterPos err=0 currentPosition=0 14:48:33 FLIGetStepsRemaining err=0 RemainingSteps=0 14:48:33 Filter is already there-color wheel unchanged 14:48:33 Received message from Master: op=Shutter serial=68162 14:48:33 Shutter LASER close 14:48:33 Received message from Camera: op=State serial=68164 14:48:33 GetSingleValue result=40 Value=cccccccc 14:48:33 SkyScan query 14:48:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:48:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:34 Parameters OK 14:48:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:34 Set A/D data flow result=40 14:48:34 Set A/D channel type result=40 14:48:34 Set A/D encoding result=40 14:48:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:34 Set channel filter=0.000000e+000 result=40 14:48:34 Config A/D Result=40 14:48:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:34 Get A/D filter: -9.255963e+061 result=40 14:48:34 Get A/D value=-858993460 result=40 14:48:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:34 Parameters OK 14:48:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:34 Set A/D data flow result=40 14:48:34 Set A/D channel type result=40 14:48:34 Set A/D encoding result=40 14:48:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:34 Set channel filter=0.000000e+000 result=40 14:48:34 Config A/D Result=40 14:48:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:34 Get A/D filter: -9.255963e+061 result=40 14:48:34 Get A/D value=-858993460 result=40 14:48:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:48:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:48:34 Aux= 14:48:34 Message to Camera, serial 68164 queued 14:49:11 Received message from Master: op=PointingHead serial=68177 14:49:11 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:49:11 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:49:11 Point started: ret=0 14:49:11 point_skyscan result=0 14:49:12 Check angles 14:49:12 SkyScan query 14:49:12 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.05<-13470 Statuses=0009 0009 14:49:12 Msec=0 True Az=153.225 Ze=-22.05 Az status=0009 Ze status=0009 14:49:12 Check angles 14:49:12 SkyScan query 14:49:13 SkyScan query done: ret=0 az=135.465<-9031 ze=-0.615<-12041 Statuses=0009 0009 14:49:13 Msec=750 True Az=135.465 Ze=-0.615 Az status=0009 Ze status=0009 14:49:13 Check angles 14:49:13 SkyScan query 14:49:14 SkyScan query done: ret=0 az=117.48<-7832 ze=20.745<-10617 Statuses=0009 0009 14:49:14 Msec=1500 True Az=117.48 Ze=20.745 Az status=0009 Ze status=0009 14:49:14 Check angles 14:49:14 SkyScan query 14:49:14 SkyScan query done: ret=0 az=100.11<-6674 ze=41.73<-9218 Statuses=0009 0009 14:49:14 Msec=2250 True Az=100.11 Ze=41.73 Az status=0009 Ze status=0009 14:49:15 Check angles 14:49:15 SkyScan query 14:49:15 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 14:49:15 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 14:49:15 Check angles 14:49:15 SkyScan query 14:49:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:49:16 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:49:16 Message to Master queued w/err=0: serial=68177 error=0 14:49:21 Received message from Master: op=Filter serial=68178 14:49:21 Color wheel filter change from 0 to 0 14:49:21 FLIGetFilterPos err=0 currentPosition=0 14:49:21 FLIGetStepsRemaining err=0 RemainingSteps=0 14:49:21 Filter is already there-color wheel unchanged 14:49:21 Received message from Master: op=Shutter serial=68179 14:49:21 Shutter LASER close 14:49:21 Received message from Camera: op=State serial=68181 14:49:21 GetSingleValue result=40 Value=cccccccc 14:49:21 SkyScan query 14:49:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:49:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:22 Parameters OK 14:49:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:22 Set A/D data flow result=40 14:49:22 Set A/D channel type result=40 14:49:22 Set A/D encoding result=40 14:49:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:22 Set channel filter=0.000000e+000 result=40 14:49:22 Config A/D Result=40 14:49:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:22 Get A/D filter: -9.255963e+061 result=40 14:49:22 Get A/D value=-858993460 result=40 14:49:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:22 Parameters OK 14:49:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:22 Set A/D data flow result=40 14:49:22 Set A/D channel type result=40 14:49:22 Set A/D encoding result=40 14:49:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:22 Set channel filter=0.000000e+000 result=40 14:49:22 Config A/D Result=40 14:49:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:22 Get A/D filter: -9.255963e+061 result=40 14:49:22 Get A/D value=-858993460 result=40 14:49:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:49:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:49:22 Aux= 14:49:22 Message to Camera, serial 68181 queued 14:49:59 Received message from Master: op=PointingHead serial=68194 14:49:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:49:59 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:49:59 Point started: ret=0 14:49:59 point_skyscan result=0 14:50:00 Check angles 14:50:00 SkyScan query 14:50:00 SkyScan query done: ret=0 az=109.365<-7291 ze=38.49<-9434 Statuses=0009 0008 14:50:00 Msec=0 True Az=109.365 Ze=38.49 Az status=0009 Ze status=0008 14:50:01 Check angles 14:50:01 SkyScan query 14:50:01 SkyScan query done: ret=0 az=126.855<-8457 ze=38.505<-9433 Statuses=0009 0008 14:50:01 Msec=750 True Az=126.855 Ze=38.505 Az status=0009 Ze status=0008 14:50:01 Check angles 14:50:01 SkyScan query 14:50:02 SkyScan query done: ret=0 az=144.705<-9647 ze=38.505<-9433 Statuses=0009 0008 14:50:02 Msec=1500 True Az=144.705 Ze=38.505 Az status=0009 Ze status=0008 14:50:02 Check angles 14:50:02 SkyScan query 14:50:03 SkyScan query done: ret=0 az=162.225<-10815 ze=38.505<-9433 Statuses=0009 0008 14:50:03 Msec=2250 True Az=162.225 Ze=38.505 Az status=0009 Ze status=0008 14:50:03 Check angles 14:50:03 SkyScan query 14:50:03 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:50:03 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:50:04 Check angles 14:50:04 SkyScan query 14:50:04 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:50:04 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:50:04 Message to Master queued w/err=0: serial=68194 error=0 14:50:09 Received message from Master: op=Filter serial=68195 14:50:09 Color wheel filter change from 0 to 0 14:50:09 FLIGetFilterPos err=0 currentPosition=0 14:50:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:50:09 Filter is already there-color wheel unchanged 14:50:09 Received message from Master: op=Shutter serial=68196 14:50:09 Shutter LASER close 14:50:09 Received message from Camera: op=State serial=68198 14:50:09 GetSingleValue result=40 Value=cccccccc 14:50:09 SkyScan query 14:50:10 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:50:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:10 Parameters OK 14:50:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:10 Set A/D data flow result=40 14:50:10 Set A/D channel type result=40 14:50:10 Set A/D encoding result=40 14:50:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:10 Set channel filter=0.000000e+000 result=40 14:50:10 Config A/D Result=40 14:50:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:10 Get A/D filter: -9.255963e+061 result=40 14:50:10 Get A/D value=-858993460 result=40 14:50:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:10 Parameters OK 14:50:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:10 Set A/D data flow result=40 14:50:10 Set A/D channel type result=40 14:50:10 Set A/D encoding result=40 14:50:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:10 Set channel filter=0.000000e+000 result=40 14:50:10 Config A/D Result=40 14:50:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:10 Get A/D filter: -9.255963e+061 result=40 14:50:10 Get A/D value=-858993460 result=40 14:50:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:50:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:50:10 Aux= 14:50:10 Message to Camera, serial 68198 queued 14:50:47 Received message from Master: op=PointingHead serial=68211 14:50:47 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:50:47 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:50:47 Point started: ret=0 14:50:47 point_skyscan result=0 14:50:48 Check angles 14:50:48 SkyScan query 14:50:48 SkyScan query done: ret=0 az=152.775<-10185 ze=8.325<-11445 Statuses=0009 0009 14:50:48 Msec=0 True Az=152.775 Ze=8.325 Az status=0009 Ze status=0009 14:50:49 Check angles 14:50:49 SkyScan query 14:50:49 SkyScan query done: ret=0 az=135.36<-9024 ze=-12.6<-12840 Statuses=0009 0009 14:50:49 Msec=750 True Az=135.36 Ze=-12.6 Az status=0009 Ze status=0009 14:50:49 Check angles 14:50:49 SkyScan query 14:50:50 SkyScan query done: ret=0 az=117.72<-7848 ze=-33.54<-14236 Statuses=0009 0009 14:50:50 Msec=1500 True Az=117.72 Ze=-33.54 Az status=0009 Ze status=0009 14:50:50 Check angles 14:50:50 SkyScan query 14:50:51 SkyScan query done: ret=0 az=100.2<-6680 ze=-51.555<-15437 Statuses=0009 0009 14:50:51 Msec=2250 True Az=100.2 Ze=-51.555 Az status=0009 Ze status=0009 14:50:51 Check angles 14:50:51 SkyScan query 14:50:51 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 14:50:51 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 14:50:52 Check angles 14:50:52 SkyScan query 14:50:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:50:52 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:50:52 Message to Master queued w/err=0: serial=68211 error=0 14:50:57 Received message from Master: op=Filter serial=68212 14:50:57 Color wheel filter change from 0 to 0 14:50:57 FLIGetFilterPos err=0 currentPosition=0 14:50:57 FLIGetStepsRemaining err=0 RemainingSteps=0 14:50:57 Filter is already there-color wheel unchanged 14:50:57 Received message from Master: op=Shutter serial=68213 14:50:57 Shutter LASER close 14:50:57 Received message from Camera: op=State serial=68215 14:50:57 GetSingleValue result=40 Value=cccccccc 14:50:57 SkyScan query 14:50:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:50:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:58 Parameters OK 14:50:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:58 Set A/D data flow result=40 14:50:58 Set A/D channel type result=40 14:50:58 Set A/D encoding result=40 14:50:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:58 Set channel filter=0.000000e+000 result=40 14:50:58 Config A/D Result=40 14:50:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:58 Get A/D filter: -9.255963e+061 result=40 14:50:58 Get A/D value=-858993460 result=40 14:50:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:58 Parameters OK 14:50:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:58 Set A/D data flow result=40 14:50:58 Set A/D channel type result=40 14:50:58 Set A/D encoding result=40 14:50:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:58 Set channel filter=0.000000e+000 result=40 14:50:58 Config A/D Result=40 14:50:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:58 Get A/D filter: -9.255963e+061 result=40 14:50:58 Get A/D value=-858993460 result=40 14:50:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:50:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:50:58 Aux= 14:50:58 Message to Camera, serial 68215 queued 14:51:35 Received message from Master: op=PointingHead serial=68228 14:51:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:51:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:51:35 Point started: ret=0 14:51:35 point_skyscan result=0 14:51:36 Check angles 14:51:36 SkyScan query 14:51:36 SkyScan query done: ret=0 az=109.365<-7291 ze=-81.765<-17451 Statuses=0009 0009 14:51:36 Msec=0 True Az=109.365 Ze=-81.765 Az status=0009 Ze status=0009 14:51:37 Check angles 14:51:37 SkyScan query 14:51:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.14<-18876 Statuses=0008 0009 14:51:37 Msec=750 True Az=112.995 Ze=-103.14 Az status=0008 Ze status=0009 14:51:37 Check angles 14:51:37 SkyScan query 14:51:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.485<-20299 Statuses=0008 0009 14:51:38 Msec=1500 True Az=112.995 Ze=-124.485 Az status=0008 Ze status=0009 14:51:38 Check angles 14:51:38 SkyScan query 14:51:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.47<-21698 Statuses=0008 0009 14:51:39 Msec=2250 True Az=112.995 Ze=-145.47 Az status=0008 Ze status=0009 14:51:39 Check angles 14:51:39 SkyScan query 14:51:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.425<-23095 Statuses=0008 0009 14:51:40 Msec=3000 True Az=112.995 Ze=-166.425 Az status=0008 Ze status=0009 14:51:40 Check angles 14:51:40 SkyScan query 14:51:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:51:40 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:51:40 Message to Master queued w/err=0: serial=68228 error=0 14:51:45 Received message from Master: op=Filter serial=68229 14:51:45 Color wheel filter change from 0 to 0 14:51:45 FLIGetFilterPos err=0 currentPosition=0 14:51:45 FLIGetStepsRemaining err=0 RemainingSteps=0 14:51:45 Filter is already there-color wheel unchanged 14:51:45 Received message from Master: op=Shutter serial=68230 14:51:45 Shutter LASER open 14:51:46 Received message from Camera: op=State serial=68232 14:51:46 GetSingleValue result=40 Value=cccccccc 14:51:46 SkyScan query 14:51:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:51:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:46 Parameters OK 14:51:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:46 Set A/D data flow result=40 14:51:46 Set A/D channel type result=40 14:51:46 Set A/D encoding result=40 14:51:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:46 Set channel filter=0.000000e+000 result=40 14:51:46 Config A/D Result=40 14:51:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:46 Get A/D filter: -9.255963e+061 result=40 14:51:46 Get A/D value=-858993460 result=40 14:51:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:46 Parameters OK 14:51:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:46 Set A/D data flow result=40 14:51:46 Set A/D channel type result=40 14:51:46 Set A/D encoding result=40 14:51:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:46 Set channel filter=0.000000e+000 result=40 14:51:46 Config A/D Result=40 14:51:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:46 Get A/D filter: -9.255963e+061 result=40 14:51:46 Get A/D value=-858993460 result=40 14:51:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:51:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:51:46 Aux= 14:51:46 Message to Camera, serial 68232 queued 14:51:55 Received message from Master: op=Shutter serial=68242 14:51:55 Shutter LASER close 14:51:55 Received message from Master: op=PointingHead serial=68246 14:51:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:51:55 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:51:55 Point started: ret=0 14:51:55 point_skyscan result=0 14:51:56 Check angles 14:51:56 SkyScan query 14:51:57 SkyScan query done: ret=0 az=89.61<-5974 ze=156.87<-1542 Statuses=0009 0009 14:51:57 Msec=0 True Az=89.61 Ze=156.87 Az status=0009 Ze status=0009 14:51:57 Check angles 14:51:57 SkyScan query 14:51:58 SkyScan query done: ret=0 az=72.015<-4801 ze=135.93<-2938 Statuses=0009 0009 14:51:58 Msec=750 True Az=72.015 Ze=135.93 Az status=0009 Ze status=0009 14:51:58 Check angles 14:51:58 SkyScan query 14:51:58 SkyScan query done: ret=0 az=54.525<-3635 ze=114.495<-4367 Statuses=0009 0009 14:51:58 Msec=1500 True Az=54.525 Ze=114.495 Az status=0009 Ze status=0009 14:51:59 Check angles 14:51:59 SkyScan query 14:51:59 SkyScan query done: ret=0 az=40.95<-2730 ze=93.57<-5762 Statuses=0009 0009 14:51:59 Msec=2250 True Az=40.95 Ze=93.57 Az status=0009 Ze status=0009 14:51:59 Check angles 14:51:59 SkyScan query 14:52:00 SkyScan query done: ret=0 az=40.995<-2733 ze=72.6<-7160 Statuses=0008 0009 14:52:00 Msec=3000 True Az=40.995 Ze=72.6 Az status=0008 Ze status=0009 14:52:00 Check angles 14:52:00 SkyScan query 14:52:01 SkyScan query done: ret=0 az=40.995<-2733 ze=52.14<-8524 Statuses=0008 0009 14:52:01 Msec=3750 True Az=40.995 Ze=52.14 Az status=0008 Ze status=0009 14:52:01 Check angles 14:52:01 SkyScan query 14:52:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:52:01 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:52:01 Message to Master queued w/err=0: serial=68246 error=0 14:52:06 Received message from Master: op=Filter serial=68247 14:52:06 Color wheel filter change from 0 to 0 14:52:06 FLIGetFilterPos err=0 currentPosition=0 14:52:06 FLIGetStepsRemaining err=0 RemainingSteps=0 14:52:06 Filter is already there-color wheel unchanged 14:52:07 Received message from Master: op=Shutter serial=68248 14:52:07 Shutter LASER close 14:52:07 Received message from Camera: op=State serial=68250 14:52:07 GetSingleValue result=40 Value=cccccccc 14:52:07 SkyScan query 14:52:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:52:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:07 Parameters OK 14:52:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:07 Set A/D data flow result=40 14:52:07 Set A/D channel type result=40 14:52:07 Set A/D encoding result=40 14:52:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:07 Set channel filter=0.000000e+000 result=40 14:52:07 Config A/D Result=40 14:52:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:07 Get A/D filter: -9.255963e+061 result=40 14:52:07 Get A/D value=-858993460 result=40 14:52:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:07 Parameters OK 14:52:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:07 Set A/D data flow result=40 14:52:07 Set A/D channel type result=40 14:52:07 Set A/D encoding result=40 14:52:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:07 Set channel filter=0.000000e+000 result=40 14:52:07 Config A/D Result=40 14:52:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:07 Get A/D filter: -9.255963e+061 result=40 14:52:07 Get A/D value=-858993460 result=40 14:52:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:52:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:52:07 Aux= 14:52:07 Message to Camera, serial 68250 queued 14:52:44 Received message from Master: op=PointingHead serial=68263 14:52:44 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:52:44 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:52:44 Point started: ret=0 14:52:44 point_skyscan result=0 14:52:45 Check angles 14:52:45 SkyScan query 14:52:46 SkyScan query done: ret=0 az=64.26<-4284 ze=66.555<-7563 Statuses=0009 0008 14:52:46 Msec=0 True Az=64.26 Ze=66.555 Az status=0009 Ze status=0008 14:52:46 Check angles 14:52:46 SkyScan query 14:52:47 SkyScan query done: ret=0 az=82.035<-5469 ze=66.495<-7567 Statuses=0009 0008 14:52:47 Msec=750 True Az=82.035 Ze=66.495 Az status=0009 Ze status=0008 14:52:47 Check angles 14:52:47 SkyScan query 14:52:47 SkyScan query done: ret=0 az=99.675<-6645 ze=66.495<-7567 Statuses=0009 0008 14:52:47 Msec=1500 True Az=99.675 Ze=66.495 Az status=0009 Ze status=0008 14:52:47 Check angles 14:52:47 SkyScan query 14:52:48 SkyScan query done: ret=0 az=117.18<-7812 ze=66.495<-7567 Statuses=0009 0008 14:52:48 Msec=2250 True Az=117.18 Ze=66.495 Az status=0009 Ze status=0008 14:52:48 Check angles 14:52:48 SkyScan query 14:52:49 SkyScan query done: ret=0 az=134.58<-8972 ze=66.495<-7567 Statuses=0009 0008 14:52:49 Msec=3000 True Az=134.58 Ze=66.495 Az status=0009 Ze status=0008 14:52:49 Check angles 14:52:49 SkyScan query 14:52:50 SkyScan query done: ret=0 az=152.055<-10137 ze=66.495<-7567 Statuses=0009 0008 14:52:50 Msec=3750 True Az=152.055 Ze=66.495 Az status=0009 Ze status=0008 14:52:50 Check angles 14:52:50 SkyScan query 14:52:50 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:52:50 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 14:52:50 Message to Master queued w/err=0: serial=68263 error=0 14:52:55 Received message from Master: op=Filter serial=68264 14:52:55 Color wheel filter change from 0 to 0 14:52:55 FLIGetFilterPos err=0 currentPosition=0 14:52:55 FLIGetStepsRemaining err=0 RemainingSteps=0 14:52:55 Filter is already there-color wheel unchanged 14:52:55 Received message from Master: op=Shutter serial=68265 14:52:55 Shutter LASER close 14:52:56 Received message from Camera: op=State serial=68267 14:52:56 GetSingleValue result=40 Value=cccccccc 14:52:56 SkyScan query 14:52:56 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:52:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:56 Parameters OK 14:52:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:56 Set A/D data flow result=40 14:52:56 Set A/D channel type result=40 14:52:56 Set A/D encoding result=40 14:52:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:56 Set channel filter=0.000000e+000 result=40 14:52:56 Config A/D Result=40 14:52:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:56 Get A/D filter: -9.255963e+061 result=40 14:52:56 Get A/D value=-858993460 result=40 14:52:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:56 Parameters OK 14:52:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:56 Set A/D data flow result=40 14:52:56 Set A/D channel type result=40 14:52:56 Set A/D encoding result=40 14:52:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:56 Set channel filter=0.000000e+000 result=40 14:52:56 Config A/D Result=40 14:52:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:56 Get A/D filter: -9.255963e+061 result=40 14:52:56 Get A/D value=-858993460 result=40 14:52:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:56 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:52:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:52:56 Aux= 14:52:56 Message to Camera, serial 68267 queued 14:53:33 Received message from Master: op=PointingHead serial=68280 14:53:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:53:33 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:53:33 Point started: ret=0 14:53:33 point_skyscan result=0 14:53:34 Check angles 14:53:34 SkyScan query 14:53:35 SkyScan query done: ret=0 az=134.595<-8973 ze=36.495<-9567 Statuses=0009 0009 14:53:35 Msec=0 True Az=134.595 Ze=36.495 Az status=0009 Ze status=0009 14:53:35 Check angles 14:53:35 SkyScan query 14:53:35 SkyScan query done: ret=0 az=117.24<-7816 ze=15.555<-10963 Statuses=0009 0009 14:53:35 Msec=750 True Az=117.24 Ze=15.555 Az status=0009 Ze status=0009 14:53:36 Check angles 14:53:36 SkyScan query 14:53:36 SkyScan query done: ret=0 az=99.87<-6658 ze=-5.445<-12363 Statuses=0009 0009 14:53:36 Msec=1500 True Az=99.87 Ze=-5.445 Az status=0009 Ze status=0009 14:53:36 Check angles 14:53:36 SkyScan query 14:53:37 SkyScan query done: ret=0 az=82.035<-5469 ze=-26.82<-13788 Statuses=0009 0009 14:53:37 Msec=2250 True Az=82.035 Ze=-26.82 Az status=0009 Ze status=0009 14:53:37 Check angles 14:53:37 SkyScan query 14:53:38 SkyScan query done: ret=0 az=64.5<-4300 ze=-38.565<-14571 Statuses=0009 0008 14:53:38 Msec=3000 True Az=64.5 Ze=-38.565 Az status=0009 Ze status=0008 14:53:38 Check angles 14:53:38 SkyScan query 14:53:38 SkyScan query done: ret=0 az=47.07<-3138 ze=-38.535<-14569 Statuses=0009 0008 14:53:38 Msec=3750 True Az=47.07 Ze=-38.535 Az status=0009 Ze status=0008 14:53:39 Check angles 14:53:39 SkyScan query 14:53:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:53:39 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:53:39 Message to Master queued w/err=0: serial=68280 error=0 14:53:44 Received message from Master: op=Filter serial=68281 14:53:44 Color wheel filter change from 0 to 0 14:53:44 FLIGetFilterPos err=0 currentPosition=0 14:53:44 FLIGetStepsRemaining err=0 RemainingSteps=0 14:53:44 Filter is already there-color wheel unchanged 14:53:44 Received message from Master: op=Shutter serial=68282 14:53:44 Shutter LASER close 14:53:44 Received message from Camera: op=State serial=68284 14:53:44 GetSingleValue result=40 Value=cccccccc 14:53:44 SkyScan query 14:53:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:53:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:45 Parameters OK 14:53:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:45 Set A/D data flow result=40 14:53:45 Set A/D channel type result=40 14:53:45 Set A/D encoding result=40 14:53:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:45 Set channel filter=0.000000e+000 result=40 14:53:45 Config A/D Result=40 14:53:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:45 Get A/D filter: -9.255963e+061 result=40 14:53:45 Get A/D value=-858993460 result=40 14:53:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:45 Parameters OK 14:53:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:45 Set A/D data flow result=40 14:53:45 Set A/D channel type result=40 14:53:45 Set A/D encoding result=40 14:53:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:45 Set channel filter=0.000000e+000 result=40 14:53:45 Config A/D Result=40 14:53:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:45 Get A/D filter: -9.255963e+061 result=40 14:53:45 Get A/D value=-858993460 result=40 14:53:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:53:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:53:45 Aux= 14:53:45 Message to Camera, serial 68284 queued 14:54:22 Received message from Master: op=PointingHead serial=68297 14:54:22 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:54:22 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:54:22 Point started: ret=0 14:54:22 point_skyscan result=0 14:54:23 Check angles 14:54:23 SkyScan query 14:54:23 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.505<-16567 Statuses=0009 0009 14:54:23 Msec=0 True Az=64.2 Ze=-68.505 Az status=0009 Ze status=0009 14:54:24 Check angles 14:54:24 SkyScan query 14:54:24 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.475<-17965 Statuses=0009 0009 14:54:24 Msec=750 True Az=81.54 Ze=-89.475 Az status=0009 Ze status=0009 14:54:24 Check angles 14:54:24 SkyScan query 14:54:25 SkyScan query done: ret=0 az=99.21<-6614 ze=-110.46<-19364 Statuses=0009 0009 14:54:25 Msec=1500 True Az=99.21 Ze=-110.46 Az status=0009 Ze status=0009 14:54:25 Check angles 14:54:25 SkyScan query 14:54:26 SkyScan query done: ret=0 az=116.775<-7785 ze=-131.4<-20760 Statuses=0009 0009 14:54:26 Msec=2250 True Az=116.775 Ze=-131.4 Az status=0009 Ze status=0009 14:54:26 Check angles 14:54:26 SkyScan query 14:54:26 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 14:54:26 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 14:54:27 Check angles 14:54:27 SkyScan query 14:54:27 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:54:27 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:54:27 Message to Master queued w/err=0: serial=68297 error=0 14:54:32 Received message from Master: op=Filter serial=68298 14:54:32 Color wheel filter change from 0 to 0 14:54:32 FLIGetFilterPos err=0 currentPosition=0 14:54:32 FLIGetStepsRemaining err=0 RemainingSteps=0 14:54:32 Filter is already there-color wheel unchanged 14:54:32 Received message from Master: op=Shutter serial=68299 14:54:32 Shutter LASER close 14:54:32 Received message from Camera: op=State serial=68301 14:54:32 GetSingleValue result=40 Value=cccccccc 14:54:32 SkyScan query 14:54:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:54:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:33 Parameters OK 14:54:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:33 Set A/D data flow result=40 14:54:33 Set A/D channel type result=40 14:54:33 Set A/D encoding result=40 14:54:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:33 Set channel filter=0.000000e+000 result=40 14:54:33 Config A/D Result=40 14:54:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:33 Get A/D filter: -9.255963e+061 result=40 14:54:33 Get A/D value=-858993460 result=40 14:54:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:33 Parameters OK 14:54:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:33 Set A/D data flow result=40 14:54:33 Set A/D channel type result=40 14:54:33 Set A/D encoding result=40 14:54:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:33 Set channel filter=0.000000e+000 result=40 14:54:33 Config A/D Result=40 14:54:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:33 Get A/D filter: -9.255963e+061 result=40 14:54:33 Get A/D value=-858993460 result=40 14:54:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:33 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:54:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:54:33 Aux= 14:54:33 Message to Camera, serial 68301 queued 14:55:10 Received message from Master: op=PointingHead serial=68314 14:55:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:55:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:55:10 Point started: ret=0 14:55:10 point_skyscan result=0 14:55:11 Check angles 14:55:11 SkyScan query 14:55:11 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.285<-23419 Statuses=0009 0009 14:55:11 Msec=0 True Az=113.01 Ze=-171.285 Az status=0009 Ze status=0009 14:55:12 Check angles 14:55:12 SkyScan query 14:55:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:55:12 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:55:12 Message to Master queued w/err=0: serial=68314 error=0 14:55:17 Received message from Master: op=Filter serial=68315 14:55:17 Color wheel filter change from 0 to 0 14:55:17 FLIGetFilterPos err=0 currentPosition=0 14:55:17 FLIGetStepsRemaining err=0 RemainingSteps=0 14:55:17 Filter is already there-color wheel unchanged 14:55:17 Received message from Master: op=Shutter serial=68316 14:55:17 Shutter LASER open 14:55:18 Received message from Camera: op=State serial=68318 14:55:18 GetSingleValue result=40 Value=cccccccc 14:55:18 SkyScan query 14:55:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:55:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:18 Parameters OK 14:55:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:18 Set A/D data flow result=40 14:55:18 Set A/D channel type result=40 14:55:18 Set A/D encoding result=40 14:55:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:18 Set channel filter=0.000000e+000 result=40 14:55:18 Config A/D Result=40 14:55:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:18 Get A/D filter: -9.255963e+061 result=40 14:55:18 Get A/D value=-858993460 result=40 14:55:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:18 Parameters OK 14:55:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:18 Set A/D data flow result=40 14:55:18 Set A/D channel type result=40 14:55:18 Set A/D encoding result=40 14:55:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:18 Set channel filter=0.000000e+000 result=40 14:55:18 Config A/D Result=40 14:55:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:18 Get A/D filter: -9.255963e+061 result=40 14:55:18 Get A/D value=-858993460 result=40 14:55:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:55:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:55:18 Aux= 14:55:18 Message to Camera, serial 68318 queued 14:55:27 Received message from Master: op=Shutter serial=68328 14:55:27 Shutter LASER close 14:55:27 Received message from Master: op=PointingHead serial=68332 14:55:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:55:27 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:55:28 Point started: ret=0 14:55:28 point_skyscan result=0 14:55:28 Check angles 14:55:28 SkyScan query 14:55:29 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.565<-21571 Statuses=0009 0009 14:55:29 Msec=0 True Az=135.72 Ze=-143.565 Az status=0009 Ze status=0009 14:55:29 Check angles 14:55:29 SkyScan query 14:55:30 SkyScan query done: ret=0 az=153.18<-10212 ze=-122.61<-20174 Statuses=0009 0009 14:55:30 Msec=750 True Az=153.18 Ze=-122.61 Az status=0009 Ze status=0009 14:55:30 Check angles 14:55:30 SkyScan query 14:55:30 SkyScan query done: ret=0 az=170.715<-11381 ze=-101.685<-18779 Statuses=0009 0009 14:55:30 Msec=1500 True Az=170.715 Ze=-101.685 Az status=0009 Ze status=0009 14:55:31 Check angles 14:55:31 SkyScan query 14:55:31 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.64<-17376 Statuses=0008 0009 14:55:31 Msec=2250 True Az=176.025 Ze=-80.64 Az status=0008 Ze status=0009 14:55:31 Check angles 14:55:31 SkyScan query 14:55:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.295<-15953 Statuses=0008 0009 14:55:32 Msec=3000 True Az=175.995 Ze=-59.295 Az status=0008 Ze status=0009 14:55:32 Check angles [UTC 2018-12-11 14:55:32] 14:55:32 SkyScan query 14:55:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 14:55:33 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 14:55:33 Message to Master queued w/err=0: serial=68332 error=0 14:55:38 Received message from Master: op=Filter serial=68333 14:55:38 Color wheel filter change from 0 to 0 14:55:38 FLIGetFilterPos err=0 currentPosition=0 14:55:38 FLIGetStepsRemaining err=0 RemainingSteps=0 14:55:38 Filter is already there-color wheel unchanged 14:55:38 Received message from Master: op=Shutter serial=68334 14:55:38 Shutter LASER close 14:55:38 Received message from Camera: op=State serial=68336 14:55:38 GetSingleValue result=40 Value=cccccccc 14:55:38 SkyScan query 14:55:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:55:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:39 Parameters OK 14:55:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:39 Set A/D data flow result=40 14:55:39 Set A/D channel type result=40 14:55:39 Set A/D encoding result=40 14:55:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:39 Set channel filter=0.000000e+000 result=40 14:55:39 Config A/D Result=40 14:55:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:39 Get A/D filter: -9.255963e+061 result=40 14:55:39 Get A/D value=-858993460 result=40 14:55:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:39 Parameters OK 14:55:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:39 Set A/D data flow result=40 14:55:39 Set A/D channel type result=40 14:55:39 Set A/D encoding result=40 14:55:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:39 Set channel filter=0.000000e+000 result=40 14:55:39 Config A/D Result=40 14:55:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:39 Get A/D filter: -9.255963e+061 result=40 14:55:39 Get A/D value=-858993460 result=40 14:55:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:55:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:55:39 Aux= 14:55:39 Message to Camera, serial 68336 queued [UTC 2018-12-11 14:55:54] 14:56:15 Received message from Master: op=PointingHead serial=68349 14:56:15 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:56:15 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:56:16 Point started: ret=0 14:56:16 point_skyscan result=0 14:56:17 Check angles 14:56:17 SkyScan query 14:56:17 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.525<-13435 Statuses=0009 0009 14:56:17 Msec=0 True Az=152.775 Ze=-21.525 Az status=0009 Ze status=0009 14:56:17 Check angles 14:56:17 SkyScan query 14:56:18 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.555<-12037 Statuses=0009 0009 14:56:18 Msec=750 True Az=135.435 Ze=-0.555 Az status=0009 Ze status=0009 14:56:18 Check angles 14:56:18 SkyScan query 14:56:19 SkyScan query done: ret=0 az=117.765<-7851 ze=20.37<-10642 Statuses=0009 0009 14:56:19 Msec=1500 True Az=117.765 Ze=20.37 Az status=0009 Ze status=0009 14:56:19 Check angles 14:56:19 SkyScan query 14:56:19 SkyScan query done: ret=0 az=100.32<-6688 ze=41.37<-9242 Statuses=0009 0009 14:56:19 Msec=2250 True Az=100.32 Ze=41.37 Az status=0009 Ze status=0009 14:56:20 Check angles 14:56:20 SkyScan query 14:56:20 SkyScan query done: ret=0 az=86.04<-5736 ze=51.555<-8563 Statuses=0009 0008 14:56:20 Msec=3000 True Az=86.04 Ze=51.555 Az status=0009 Ze status=0008 14:56:20 Check angles 14:56:20 SkyScan query 14:56:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:56:21 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:56:21 Message to Master queued w/err=0: serial=68349 error=0 14:56:26 Received message from Master: op=Filter serial=68350 14:56:26 Color wheel filter change from 0 to 0 14:56:26 FLIGetFilterPos err=0 currentPosition=0 14:56:26 FLIGetStepsRemaining err=0 RemainingSteps=0 14:56:26 Filter is already there-color wheel unchanged 14:56:26 Received message from Master: op=Shutter serial=68351 14:56:26 Shutter LASER close 14:56:26 Received message from Camera: op=State serial=68353 14:56:26 GetSingleValue result=40 Value=cccccccc 14:56:26 SkyScan query 14:56:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:56:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:27 Parameters OK 14:56:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:27 Set A/D data flow result=40 14:56:27 Set A/D channel type result=40 14:56:27 Set A/D encoding result=40 14:56:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:27 Set channel filter=0.000000e+000 result=40 14:56:27 Config A/D Result=40 14:56:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:27 Get A/D filter: -9.255963e+061 result=40 14:56:27 Get A/D value=-858993460 result=40 14:56:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:27 Parameters OK 14:56:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:27 Set A/D data flow result=40 14:56:27 Set A/D channel type result=40 14:56:27 Set A/D encoding result=40 14:56:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:27 Set channel filter=0.000000e+000 result=40 14:56:27 Config A/D Result=40 14:56:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:27 Get A/D filter: -9.255963e+061 result=40 14:56:27 Get A/D value=-858993460 result=40 14:56:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:56:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:56:27 Aux= 14:56:27 Message to Camera, serial 68353 queued 14:57:03 Received message from Master: op=PointingHead serial=68365 14:57:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:57:03 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:57:03 Point started: ret=0 14:57:03 point_skyscan result=0 14:57:04 Check angles 14:57:04 SkyScan query 14:57:04 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 14:57:04 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 14:57:04 Check angles 14:57:04 SkyScan query 14:57:05 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 14:57:05 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 14:57:05 Check angles 14:57:05 SkyScan query 14:57:06 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 14:57:06 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 14:57:06 Check angles 14:57:06 SkyScan query 14:57:06 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 14:57:06 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 14:57:07 Check angles 14:57:07 SkyScan query 14:57:07 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 14:57:07 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 14:57:07 Check angles 14:57:07 SkyScan query 14:57:08 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:57:08 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:57:08 Message to Master queued w/err=0: serial=68365 error=0 14:57:13 Received message from Master: op=Filter serial=68366 14:57:13 Color wheel filter change from 0 to 0 14:57:13 FLIGetFilterPos err=0 currentPosition=0 14:57:13 FLIGetStepsRemaining err=0 RemainingSteps=0 14:57:13 Filter is already there-color wheel unchanged 14:57:13 Received message from Master: op=Shutter serial=68367 14:57:13 Shutter LASER close 14:57:13 Received message from Camera: op=State serial=68369 14:57:13 GetSingleValue result=40 Value=cccccccc 14:57:13 SkyScan query 14:57:14 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:57:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:14 Parameters OK 14:57:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:14 Set A/D data flow result=40 14:57:14 Set A/D channel type result=40 14:57:14 Set A/D encoding result=40 14:57:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:14 Set channel filter=0.000000e+000 result=40 14:57:14 Config A/D Result=40 14:57:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:14 Get A/D filter: -9.255963e+061 result=40 14:57:14 Get A/D value=-858993460 result=40 14:57:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:14 Parameters OK 14:57:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:14 Set A/D data flow result=40 14:57:14 Set A/D channel type result=40 14:57:14 Set A/D encoding result=40 14:57:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:14 Set channel filter=0.000000e+000 result=40 14:57:14 Config A/D Result=40 14:57:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:14 Get A/D filter: -9.255963e+061 result=40 14:57:14 Get A/D value=-858993460 result=40 14:57:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:57:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:57:14 Aux= 14:57:14 Message to Camera, serial 68369 queued 14:57:51 Received message from Master: op=PointingHead serial=68382 14:57:51 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:57:51 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:57:51 Point started: ret=0 14:57:51 point_skyscan result=0 14:57:52 Check angles 14:57:52 SkyScan query 14:57:52 SkyScan query done: ret=0 az=152.625<-10175 ze=8.19<-11454 Statuses=0009 0009 14:57:52 Msec=0 True Az=152.625 Ze=8.19 Az status=0009 Ze status=0009 14:57:52 Check angles 14:57:52 SkyScan query 14:57:53 SkyScan query done: ret=0 az=135.105<-9007 ze=-12.72<-12848 Statuses=0009 0009 14:57:53 Msec=750 True Az=135.105 Ze=-12.72 Az status=0009 Ze status=0009 14:57:53 Check angles 14:57:53 SkyScan query 14:57:54 SkyScan query done: ret=0 az=117.525<-7835 ze=-33.69<-14246 Statuses=0009 0009 14:57:54 Msec=1500 True Az=117.525 Ze=-33.69 Az status=0009 Ze status=0009 14:57:54 Check angles 14:57:54 SkyScan query 14:57:55 SkyScan query done: ret=0 az=100.155<-6677 ze=-51.555<-15437 Statuses=0009 0009 14:57:55 Msec=2250 True Az=100.155 Ze=-51.555 Az status=0009 Ze status=0009 14:57:55 Check angles 14:57:55 SkyScan query 14:57:55 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 14:57:55 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 14:57:55 Check angles 14:57:55 SkyScan query 14:57:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:57:56 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:57:56 Message to Master queued w/err=0: serial=68382 error=0 14:58:01 Received message from Master: op=Filter serial=68383 14:58:01 Color wheel filter change from 0 to 0 14:58:01 FLIGetFilterPos err=0 currentPosition=0 14:58:01 FLIGetStepsRemaining err=0 RemainingSteps=0 14:58:01 Filter is already there-color wheel unchanged 14:58:01 Received message from Master: op=Shutter serial=68384 14:58:01 Shutter LASER close 14:58:01 Received message from Camera: op=State serial=68386 14:58:01 GetSingleValue result=40 Value=cccccccc 14:58:01 SkyScan query 14:58:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:58:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:02 Parameters OK 14:58:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:02 Set A/D data flow result=40 14:58:02 Set A/D channel type result=40 14:58:02 Set A/D encoding result=40 14:58:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:02 Set channel filter=0.000000e+000 result=40 14:58:02 Config A/D Result=40 14:58:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:02 Get A/D filter: -9.255963e+061 result=40 14:58:02 Get A/D value=-858993460 result=40 14:58:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:02 Parameters OK 14:58:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:02 Set A/D data flow result=40 14:58:02 Set A/D channel type result=40 14:58:02 Set A/D encoding result=40 14:58:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:02 Set channel filter=0.000000e+000 result=40 14:58:02 Config A/D Result=40 14:58:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:02 Get A/D filter: -9.255963e+061 result=40 14:58:02 Get A/D value=-858993460 result=40 14:58:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:58:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:58:02 Aux= 14:58:02 Message to Camera, serial 68386 queued 14:58:39 Received message from Master: op=PointingHead serial=68399 14:58:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:58:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:58:39 Point started: ret=0 14:58:39 point_skyscan result=0 14:58:40 Check angles 14:58:40 SkyScan query 14:58:40 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.735<-17449 Statuses=0009 0009 14:58:40 Msec=0 True Az=109.395 Ze=-81.735 Az status=0009 Ze status=0009 14:58:41 Check angles 14:58:41 SkyScan query 14:58:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.08<-18872 Statuses=0008 0009 14:58:41 Msec=750 True Az=112.995 Ze=-103.08 Az status=0008 Ze status=0009 14:58:41 Check angles 14:58:41 SkyScan query 14:58:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.035<-20269 Statuses=0008 0009 14:58:42 Msec=1500 True Az=112.995 Ze=-124.035 Az status=0008 Ze status=0009 14:58:42 Check angles 14:58:42 SkyScan query 14:58:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.975<-21665 Statuses=0008 0009 14:58:43 Msec=2250 True Az=112.995 Ze=-144.975 Az status=0008 Ze status=0009 14:58:43 Check angles 14:58:43 SkyScan query 14:58:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.915<-23061 Statuses=0008 0009 14:58:43 Msec=3000 True Az=112.995 Ze=-165.915 Az status=0008 Ze status=0009 14:58:44 Check angles 14:58:44 SkyScan query 14:58:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:58:44 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:58:44 Message to Master queued w/err=0: serial=68399 error=0 14:58:49 Received message from Master: op=Filter serial=68400 14:58:49 Color wheel filter change from 0 to 0 14:58:49 FLIGetFilterPos err=0 currentPosition=0 14:58:49 FLIGetStepsRemaining err=0 RemainingSteps=0 14:58:49 Filter is already there-color wheel unchanged 14:58:49 Received message from Master: op=Shutter serial=68401 14:58:49 Shutter LASER open 14:58:50 Received message from Camera: op=State serial=68403 14:58:50 GetSingleValue result=40 Value=cccccccc 14:58:50 SkyScan query 14:58:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:58:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:50 Parameters OK 14:58:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:50 Set A/D data flow result=40 14:58:50 Set A/D channel type result=40 14:58:50 Set A/D encoding result=40 14:58:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:50 Set channel filter=0.000000e+000 result=40 14:58:50 Config A/D Result=40 14:58:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:50 Get A/D filter: -9.255963e+061 result=40 14:58:50 Get A/D value=-858993460 result=40 14:58:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:50 Parameters OK 14:58:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:50 Set A/D data flow result=40 14:58:50 Set A/D channel type result=40 14:58:50 Set A/D encoding result=40 14:58:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:50 Set channel filter=0.000000e+000 result=40 14:58:50 Config A/D Result=40 14:58:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:50 Get A/D filter: -9.255963e+061 result=40 14:58:50 Get A/D value=-858993460 result=40 14:58:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:58:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:58:50 Aux= 14:58:50 Message to Camera, serial 68403 queued 14:58:59 Received message from Master: op=Shutter serial=68413 14:58:59 Shutter LASER close 14:58:59 Received message from Master: op=PointingHead serial=68417 14:58:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:58:59 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:58:59 Point started: ret=0 14:58:59 point_skyscan result=0 14:59:00 Check angles 14:59:00 SkyScan query 14:59:01 SkyScan query done: ret=0 az=89.895<-5993 ze=157.5<-1500 Statuses=0009 0009 14:59:01 Msec=0 True Az=89.895 Ze=157.5 Az status=0009 Ze status=0009 14:59:01 Check angles 14:59:01 SkyScan query 14:59:01 SkyScan query done: ret=0 az=72.57<-4838 ze=136.455<-2903 Statuses=0009 0009 14:59:01 Msec=750 True Az=72.57 Ze=136.455 Az status=0009 Ze status=0009 14:59:02 Check angles 14:59:02 SkyScan query 14:59:02 SkyScan query done: ret=0 az=55.11<-3674 ze=115.62<-4292 Statuses=0009 0009 14:59:02 Msec=1500 True Az=55.11 Ze=115.62 Az status=0009 Ze status=0009 14:59:02 Check angles 14:59:02 SkyScan query 14:59:03 SkyScan query done: ret=0 az=40.86<-2724 ze=94.635<-5691 Statuses=0009 0009 14:59:03 Msec=2250 True Az=40.86 Ze=94.635 Az status=0009 Ze status=0009 14:59:03 Check angles 14:59:03 SkyScan query 14:59:04 SkyScan query done: ret=0 az=40.995<-2733 ze=73.695<-7087 Statuses=0008 0009 14:59:04 Msec=3000 True Az=40.995 Ze=73.695 Az status=0008 Ze status=0009 14:59:04 Check angles 14:59:04 SkyScan query 14:59:04 SkyScan query done: ret=0 az=40.995<-2733 ze=53.01<-8466 Statuses=0008 0009 14:59:04 Msec=3750 True Az=40.995 Ze=53.01 Az status=0008 Ze status=0009 14:59:05 Check angles 14:59:05 SkyScan query 14:59:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:59:05 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:59:05 Message to Master queued w/err=0: serial=68417 error=0 14:59:10 Received message from Master: op=Filter serial=68418 14:59:10 Color wheel filter change from 0 to 0 14:59:10 FLIGetFilterPos err=0 currentPosition=0 14:59:10 FLIGetStepsRemaining err=0 RemainingSteps=0 14:59:10 Filter is already there-color wheel unchanged 14:59:10 Received message from Master: op=Shutter serial=68419 14:59:10 Shutter LASER close 14:59:10 Received message from Camera: op=State serial=68421 14:59:10 GetSingleValue result=40 Value=cccccccc 14:59:10 SkyScan query 14:59:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:59:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:11 Parameters OK 14:59:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:11 Set A/D data flow result=40 14:59:11 Set A/D channel type result=40 14:59:11 Set A/D encoding result=40 14:59:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:11 Set channel filter=0.000000e+000 result=40 14:59:11 Config A/D Result=40 14:59:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:11 Get A/D filter: -9.255963e+061 result=40 14:59:11 Get A/D value=-858993460 result=40 14:59:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:11 Parameters OK 14:59:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:11 Set A/D data flow result=40 14:59:11 Set A/D channel type result=40 14:59:11 Set A/D encoding result=40 14:59:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:11 Set channel filter=0.000000e+000 result=40 14:59:11 Config A/D Result=40 14:59:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:11 Get A/D filter: -9.255963e+061 result=40 14:59:11 Get A/D value=-858993460 result=40 14:59:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:59:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:59:11 Aux= 14:59:11 Message to Camera, serial 68421 queued 14:59:47 Received message from Master: op=PointingHead serial=68433 14:59:47 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:59:47 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:59:47 Point started: ret=0 14:59:47 point_skyscan result=0 14:59:48 Check angles 14:59:48 SkyScan query 14:59:49 SkyScan query done: ret=0 az=64.59<-4306 ze=66.555<-7563 Statuses=0009 0008 14:59:49 Msec=0 True Az=64.59 Ze=66.555 Az status=0009 Ze status=0008 14:59:49 Check angles 14:59:49 SkyScan query 14:59:49 SkyScan query done: ret=0 az=82.08<-5472 ze=66.51<-7566 Statuses=0009 0008 14:59:49 Msec=750 True Az=82.08 Ze=66.51 Az status=0009 Ze status=0008 14:59:50 Check angles 14:59:50 SkyScan query 14:59:50 SkyScan query done: ret=0 az=99.9<-6660 ze=66.495<-7567 Statuses=0009 0008 14:59:50 Msec=1500 True Az=99.9 Ze=66.495 Az status=0009 Ze status=0008 14:59:50 Check angles 14:59:50 SkyScan query 14:59:51 SkyScan query done: ret=0 az=117.735<-7849 ze=66.495<-7567 Statuses=0009 0008 14:59:51 Msec=2250 True Az=117.735 Ze=66.495 Az status=0009 Ze status=0008 14:59:51 Check angles 14:59:51 SkyScan query 14:59:52 SkyScan query done: ret=0 az=135.135<-9009 ze=66.495<-7567 Statuses=0009 0008 14:59:52 Msec=3000 True Az=135.135 Ze=66.495 Az status=0009 Ze status=0008 14:59:52 Check angles 14:59:52 SkyScan query 14:59:52 SkyScan query done: ret=0 az=152.685<-10179 ze=66.495<-7567 Statuses=0009 0008 14:59:52 Msec=3750 True Az=152.685 Ze=66.495 Az status=0009 Ze status=0008 14:59:53 Check angles 14:59:53 SkyScan query 14:59:53 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:59:53 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 14:59:53 Message to Master queued w/err=0: serial=68433 error=0 14:59:58 Received message from Master: op=Filter serial=68434 14:59:58 Color wheel filter change from 0 to 0 14:59:58 FLIGetFilterPos err=0 currentPosition=0 14:59:58 FLIGetStepsRemaining err=0 RemainingSteps=0 14:59:58 Filter is already there-color wheel unchanged 14:59:58 Received message from Master: op=Shutter serial=68435 14:59:58 Shutter LASER close 14:59:58 Received message from Camera: op=State serial=68437 14:59:58 GetSingleValue result=40 Value=cccccccc 14:59:58 SkyScan query 14:59:59 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:59:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:59 Parameters OK 14:59:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:59 Set A/D data flow result=40 14:59:59 Set A/D channel type result=40 14:59:59 Set A/D encoding result=40 14:59:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:59 Set channel filter=0.000000e+000 result=40 14:59:59 Config A/D Result=40 14:59:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:59 Get A/D filter: -9.255963e+061 result=40 14:59:59 Get A/D value=-858993460 result=40 14:59:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:59 Parameters OK 14:59:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:59 Set A/D data flow result=40 14:59:59 Set A/D channel type result=40 14:59:59 Set A/D encoding result=40 14:59:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:59 Set channel filter=0.000000e+000 result=40 14:59:59 Config A/D Result=40 14:59:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:59 Get A/D filter: -9.255963e+061 result=40 14:59:59 Get A/D value=-858993460 result=40 14:59:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:59 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:59:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:59:59 Aux= 14:59:59 Message to Camera, serial 68437 queued 15:00:36 Received message from Master: op=PointingHead serial=68450 15:00:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:00:36 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:00:36 Point started: ret=0 15:00:36 point_skyscan result=0 15:00:37 Check angles 15:00:37 SkyScan query 15:00:37 SkyScan query done: ret=0 az=134.805<-8987 ze=36.6<-9560 Statuses=0009 0009 15:00:37 Msec=0 True Az=134.805 Ze=36.6 Az status=0009 Ze status=0009 15:00:38 Check angles 15:00:38 SkyScan query 15:00:38 SkyScan query done: ret=0 az=117.015<-7801 ze=15.255<-10983 Statuses=0009 0009 15:00:38 Msec=750 True Az=117.015 Ze=15.255 Az status=0009 Ze status=0009 15:00:38 Check angles 15:00:38 SkyScan query 15:00:39 SkyScan query done: ret=0 az=99.585<-6639 ze=-5.715<-12381 Statuses=0009 0009 15:00:39 Msec=1500 True Az=99.585 Ze=-5.715 Az status=0009 Ze status=0009 15:00:39 Check angles 15:00:39 SkyScan query 15:00:40 SkyScan query done: ret=0 az=82.155<-5477 ze=-26.67<-13778 Statuses=0009 0009 15:00:40 Msec=2250 True Az=82.155 Ze=-26.67 Az status=0009 Ze status=0009 15:00:40 Check angles 15:00:40 SkyScan query 15:00:41 SkyScan query done: ret=0 az=64.53<-4302 ze=-38.58<-14572 Statuses=0009 0008 15:00:41 Msec=3000 True Az=64.53 Ze=-38.58 Az status=0009 Ze status=0008 15:00:41 Check angles 15:00:41 SkyScan query 15:00:41 SkyScan query done: ret=0 az=47.25<-3150 ze=-38.52<-14568 Statuses=0009 0008 15:00:41 Msec=3750 True Az=47.25 Ze=-38.52 Az status=0009 Ze status=0008 15:00:41 Check angles 15:00:41 SkyScan query 15:00:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:00:42 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:00:42 Message to Master queued w/err=0: serial=68450 error=0 15:00:47 Received message from Master: op=Filter serial=68451 15:00:47 Color wheel filter change from 0 to 0 15:00:47 FLIGetFilterPos err=0 currentPosition=0 15:00:47 FLIGetStepsRemaining err=0 RemainingSteps=0 15:00:47 Filter is already there-color wheel unchanged 15:00:47 Received message from Master: op=Shutter serial=68452 15:00:47 Shutter LASER close 15:00:47 Received message from Camera: op=State serial=68454 15:00:47 GetSingleValue result=40 Value=cccccccc 15:00:47 SkyScan query 15:00:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:00:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:48 Parameters OK 15:00:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:48 Set A/D data flow result=40 15:00:48 Set A/D channel type result=40 15:00:48 Set A/D encoding result=40 15:00:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:48 Set channel filter=0.000000e+000 result=40 15:00:48 Config A/D Result=40 15:00:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:48 Get A/D filter: -9.255963e+061 result=40 15:00:48 Get A/D value=-858993460 result=40 15:00:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:48 Parameters OK 15:00:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:48 Set A/D data flow result=40 15:00:48 Set A/D channel type result=40 15:00:48 Set A/D encoding result=40 15:00:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:48 Set channel filter=0.000000e+000 result=40 15:00:48 Config A/D Result=40 15:00:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:48 Get A/D filter: -9.255963e+061 result=40 15:00:48 Get A/D value=-858993460 result=40 15:00:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:00:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:00:48 Aux= 15:00:48 Message to Camera, serial 68454 queued 15:01:25 Received message from Master: op=PointingHead serial=68467 15:01:25 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:01:25 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:01:25 Point started: ret=0 15:01:25 point_skyscan result=0 15:01:26 Check angles 15:01:26 SkyScan query 15:01:26 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.205<-16547 Statuses=0009 0009 15:01:26 Msec=0 True Az=63.87 Ze=-68.205 Az status=0009 Ze status=0009 15:01:27 Check angles 15:01:27 SkyScan query 15:01:27 SkyScan query done: ret=0 az=81.645<-5443 ze=-89.655<-17977 Statuses=0009 0009 15:01:27 Msec=750 True Az=81.645 Ze=-89.655 Az status=0009 Ze status=0009 15:01:27 Check angles 15:01:27 SkyScan query 15:01:28 SkyScan query done: ret=0 az=99.255<-6617 ze=-110.595<-19373 Statuses=0009 0009 15:01:28 Msec=1500 True Az=99.255 Ze=-110.595 Az status=0009 Ze status=0009 15:01:28 Check angles 15:01:28 SkyScan query 15:01:29 SkyScan query done: ret=0 az=116.79<-7786 ze=-131.535<-20769 Statuses=0009 0009 15:01:29 Msec=2250 True Az=116.79 Ze=-131.535 Az status=0009 Ze status=0009 15:01:29 Check angles 15:01:29 SkyScan query 15:01:29 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 15:01:29 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 15:01:30 Check angles 15:01:30 SkyScan query 15:01:30 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:01:30 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:01:30 Message to Master queued w/err=0: serial=68467 error=0 15:01:35 Received message from Master: op=Filter serial=68468 15:01:35 Color wheel filter change from 0 to 0 15:01:35 FLIGetFilterPos err=0 currentPosition=0 15:01:35 FLIGetStepsRemaining err=0 RemainingSteps=0 15:01:35 Filter is already there-color wheel unchanged 15:01:35 Received message from Master: op=Shutter serial=68469 15:01:35 Shutter LASER close 15:01:35 Received message from Camera: op=State serial=68471 15:01:35 GetSingleValue result=40 Value=cccccccc 15:01:35 SkyScan query 15:01:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:01:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:36 Parameters OK 15:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:36 Set A/D data flow result=40 15:01:36 Set A/D channel type result=40 15:01:36 Set A/D encoding result=40 15:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:36 Set channel filter=0.000000e+000 result=40 15:01:36 Config A/D Result=40 15:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:36 Get A/D filter: -9.255963e+061 result=40 15:01:36 Get A/D value=-858993460 result=40 15:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:36 Parameters OK 15:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:36 Set A/D data flow result=40 15:01:36 Set A/D channel type result=40 15:01:36 Set A/D encoding result=40 15:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:36 Set channel filter=0.000000e+000 result=40 15:01:36 Config A/D Result=40 15:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:36 Get A/D filter: -9.255963e+061 result=40 15:01:36 Get A/D value=-858993460 result=40 15:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:36 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:01:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:01:36 Aux= 15:01:36 Message to Camera, serial 68471 queued 15:02:12 Received message from Master: op=PointingHead serial=68483 15:02:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:02:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:02:12 Point started: ret=0 15:02:12 point_skyscan result=0 15:02:13 Check angles 15:02:13 SkyScan query 15:02:13 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.165<-23411 Statuses=0009 0009 15:02:13 Msec=0 True Az=113.01 Ze=-171.165 Az status=0009 Ze status=0009 15:02:14 Check angles 15:02:14 SkyScan query 15:02:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:02:14 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:02:14 Message to Master queued w/err=0: serial=68483 error=0 15:02:19 Received message from Master: op=Filter serial=68484 15:02:19 Color wheel filter change from 0 to 0 15:02:19 FLIGetFilterPos err=0 currentPosition=0 15:02:19 FLIGetStepsRemaining err=0 RemainingSteps=0 15:02:19 Filter is already there-color wheel unchanged 15:02:19 Received message from Master: op=Shutter serial=68485 15:02:19 Shutter LASER open 15:02:20 Received message from Camera: op=State serial=68487 15:02:20 GetSingleValue result=40 Value=cccccccc 15:02:20 SkyScan query 15:02:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:02:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:20 Parameters OK 15:02:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:20 Set A/D data flow result=40 15:02:20 Set A/D channel type result=40 15:02:20 Set A/D encoding result=40 15:02:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:20 Set channel filter=0.000000e+000 result=40 15:02:20 Config A/D Result=40 15:02:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:20 Get A/D filter: -9.255963e+061 result=40 15:02:20 Get A/D value=-858993460 result=40 15:02:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:20 Parameters OK 15:02:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:20 Set A/D data flow result=40 15:02:20 Set A/D channel type result=40 15:02:20 Set A/D encoding result=40 15:02:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:20 Set channel filter=0.000000e+000 result=40 15:02:20 Config A/D Result=40 15:02:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:20 Get A/D filter: -9.255963e+061 result=40 15:02:20 Get A/D value=-858993460 result=40 15:02:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:02:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:02:20 Aux= 15:02:20 Message to Camera, serial 68487 queued 15:02:29 Received message from Master: op=Shutter serial=68497 15:02:29 Shutter LASER close 15:02:29 Received message from Master: op=PointingHead serial=68501 15:02:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:02:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:02:30 Point started: ret=0 15:02:30 point_skyscan result=0 15:02:30 Check angles 15:02:30 SkyScan query 15:02:31 SkyScan query done: ret=0 az=135.81<-9054 ze=-143.415<-21561 Statuses=0009 0009 15:02:31 Msec=0 True Az=135.81 Ze=-143.415 Az status=0009 Ze status=0009 15:02:31 Check angles 15:02:31 SkyScan query 15:02:32 SkyScan query done: ret=0 az=153.225<-10215 ze=-122.46<-20164 Statuses=0009 0009 15:02:32 Msec=750 True Az=153.225 Ze=-122.46 Az status=0009 Ze status=0009 15:02:32 Check angles 15:02:32 SkyScan query 15:02:32 SkyScan query done: ret=0 az=170.715<-11381 ze=-101.55<-18770 Statuses=0009 0009 15:02:32 Msec=1500 True Az=170.715 Ze=-101.55 Az status=0009 Ze status=0009 15:02:33 Check angles 15:02:33 SkyScan query 15:02:33 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.52<-17368 Statuses=0008 0009 15:02:33 Msec=2250 True Az=176.025 Ze=-80.52 Az status=0008 Ze status=0009 15:02:33 Check angles 15:02:33 SkyScan query 15:02:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.595<-15973 Statuses=0008 0009 15:02:34 Msec=3000 True Az=175.995 Ze=-59.595 Az status=0008 Ze status=0009 15:02:34 Check angles 15:02:34 SkyScan query 15:02:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:02:35 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:02:35 Message to Master queued w/err=0: serial=68501 error=0 15:02:40 Received message from Master: op=Filter serial=68502 15:02:40 Color wheel filter change from 0 to 0 15:02:40 FLIGetFilterPos err=0 currentPosition=0 15:02:40 FLIGetStepsRemaining err=0 RemainingSteps=0 15:02:40 Filter is already there-color wheel unchanged 15:02:40 Received message from Master: op=Shutter serial=68503 15:02:40 Shutter LASER close 15:02:40 Received message from Camera: op=State serial=68505 15:02:40 GetSingleValue result=40 Value=cccccccc 15:02:40 SkyScan query 15:02:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:02:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:41 Parameters OK 15:02:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:41 Set A/D data flow result=40 15:02:41 Set A/D channel type result=40 15:02:41 Set A/D encoding result=40 15:02:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:41 Set channel filter=0.000000e+000 result=40 15:02:41 Config A/D Result=40 15:02:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:41 Get A/D filter: -9.255963e+061 result=40 15:02:41 Get A/D value=-858993460 result=40 15:02:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:41 Parameters OK 15:02:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:41 Set A/D data flow result=40 15:02:41 Set A/D channel type result=40 15:02:41 Set A/D encoding result=40 15:02:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:41 Set channel filter=0.000000e+000 result=40 15:02:41 Config A/D Result=40 15:02:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:41 Get A/D filter: -9.255963e+061 result=40 15:02:41 Get A/D value=-858993460 result=40 15:02:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:02:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:02:41 Aux= 15:02:41 Message to Camera, serial 68505 queued 15:03:17 Received message from Master: op=PointingHead serial=68518 15:03:17 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:03:17 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:03:18 Point started: ret=0 15:03:18 point_skyscan result=0 15:03:18 Check angles 15:03:18 SkyScan query 15:03:19 SkyScan query done: ret=0 az=153.18<-10212 ze=-22.005<-13467 Statuses=0009 0009 15:03:19 Msec=0 True Az=153.18 Ze=-22.005 Az status=0009 Ze status=0009 15:03:19 Check angles 15:03:19 SkyScan query 15:03:20 SkyScan query done: ret=0 az=135.795<-9053 ze=-1.02<-12068 Statuses=0009 0009 15:03:20 Msec=750 True Az=135.795 Ze=-1.02 Az status=0009 Ze status=0009 15:03:20 Check angles 15:03:20 SkyScan query 15:03:21 SkyScan query done: ret=0 az=117.795<-7853 ze=20.355<-10643 Statuses=0009 0009 15:03:21 Msec=1500 True Az=117.795 Ze=20.355 Az status=0009 Ze status=0009 15:03:21 Check angles 15:03:21 SkyScan query 15:03:21 SkyScan query done: ret=0 az=100.35<-6690 ze=41.34<-9244 Statuses=0009 0009 15:03:21 Msec=2250 True Az=100.35 Ze=41.34 Az status=0009 Ze status=0009 15:03:21 Check angles 15:03:21 SkyScan query 15:03:22 SkyScan query done: ret=0 az=86.04<-5736 ze=51.555<-8563 Statuses=0009 0008 15:03:22 Msec=3000 True Az=86.04 Ze=51.555 Az status=0009 Ze status=0008 15:03:22 Check angles 15:03:22 SkyScan query 15:03:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:03:23 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:03:23 Message to Master queued w/err=0: serial=68518 error=0 15:03:28 Received message from Master: op=Filter serial=68519 15:03:28 Color wheel filter change from 0 to 0 15:03:28 FLIGetFilterPos err=0 currentPosition=0 15:03:28 FLIGetStepsRemaining err=0 RemainingSteps=0 15:03:28 Filter is already there-color wheel unchanged 15:03:28 Received message from Master: op=Shutter serial=68520 15:03:28 Shutter LASER close 15:03:28 Received message from Camera: op=State serial=68522 15:03:28 GetSingleValue result=40 Value=cccccccc 15:03:28 SkyScan query 15:03:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:03:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:29 Parameters OK 15:03:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:29 Set A/D data flow result=40 15:03:29 Set A/D channel type result=40 15:03:29 Set A/D encoding result=40 15:03:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:29 Set channel filter=0.000000e+000 result=40 15:03:29 Config A/D Result=40 15:03:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:29 Get A/D filter: -9.255963e+061 result=40 15:03:29 Get A/D value=-858993460 result=40 15:03:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:29 Parameters OK 15:03:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:29 Set A/D data flow result=40 15:03:29 Set A/D channel type result=40 15:03:29 Set A/D encoding result=40 15:03:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:29 Set channel filter=0.000000e+000 result=40 15:03:29 Config A/D Result=40 15:03:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:29 Get A/D filter: -9.255963e+061 result=40 15:03:29 Get A/D value=-858993460 result=40 15:03:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:03:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:03:29 Aux= 15:03:29 Message to Camera, serial 68522 queued 15:04:05 Received message from Master: op=PointingHead serial=68535 15:04:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:04:05 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:04:06 Point started: ret=0 15:04:06 point_skyscan result=0 15:04:07 Check angles 15:04:07 SkyScan query 15:04:07 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 15:04:07 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 15:04:07 Check angles 15:04:07 SkyScan query 15:04:08 SkyScan query done: ret=0 az=126.51<-8434 ze=38.505<-9433 Statuses=0009 0008 15:04:08 Msec=750 True Az=126.51 Ze=38.505 Az status=0009 Ze status=0008 15:04:08 Check angles 15:04:08 SkyScan query 15:04:09 SkyScan query done: ret=0 az=143.91<-9594 ze=38.505<-9433 Statuses=0009 0008 15:04:09 Msec=1500 True Az=143.91 Ze=38.505 Az status=0009 Ze status=0008 15:04:09 Check angles 15:04:09 SkyScan query 15:04:09 SkyScan query done: ret=0 az=161.355<-10757 ze=38.505<-9433 Statuses=0009 0008 15:04:09 Msec=2250 True Az=161.355 Ze=38.505 Az status=0009 Ze status=0008 15:04:10 Check angles 15:04:10 SkyScan query 15:04:10 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 15:04:10 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 15:04:10 Check angles 15:04:10 SkyScan query 15:04:11 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:04:11 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:04:11 Message to Master queued w/err=0: serial=68535 error=0 15:04:16 Received message from Master: op=Filter serial=68536 15:04:16 Color wheel filter change from 0 to 0 15:04:16 FLIGetFilterPos err=0 currentPosition=0 15:04:16 FLIGetStepsRemaining err=0 RemainingSteps=0 15:04:16 Filter is already there-color wheel unchanged 15:04:16 Received message from Master: op=Shutter serial=68537 15:04:16 Shutter LASER close 15:04:16 Received message from Camera: op=State serial=68539 15:04:16 GetSingleValue result=40 Value=cccccccc 15:04:16 SkyScan query 15:04:17 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:04:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:17 Parameters OK 15:04:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:17 Set A/D data flow result=40 15:04:17 Set A/D channel type result=40 15:04:17 Set A/D encoding result=40 15:04:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:17 Set channel filter=0.000000e+000 result=40 15:04:17 Config A/D Result=40 15:04:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:17 Get A/D filter: -9.255963e+061 result=40 15:04:17 Get A/D value=-858993460 result=40 15:04:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:17 Parameters OK 15:04:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:17 Set A/D data flow result=40 15:04:17 Set A/D channel type result=40 15:04:17 Set A/D encoding result=40 15:04:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:17 Set channel filter=0.000000e+000 result=40 15:04:17 Config A/D Result=40 15:04:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:17 Get A/D filter: -9.255963e+061 result=40 15:04:17 Get A/D value=-858993460 result=40 15:04:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:04:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:04:17 Aux= 15:04:17 Message to Camera, serial 68539 queued 15:04:53 Received message from Master: op=PointingHead serial=68552 15:04:53 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:04:53 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:04:54 Point started: ret=0 15:04:54 point_skyscan result=0 15:04:55 Check angles 15:04:55 SkyScan query 15:04:55 SkyScan query done: ret=0 az=152.79<-10186 ze=8.55<-11430 Statuses=0009 0009 15:04:55 Msec=0 True Az=152.79 Ze=8.55 Az status=0009 Ze status=0009 15:04:55 Check angles 15:04:55 SkyScan query 15:04:56 SkyScan query done: ret=0 az=135.465<-9031 ze=-12.39<-12826 Statuses=0009 0009 15:04:56 Msec=750 True Az=135.465 Ze=-12.39 Az status=0009 Ze status=0009 15:04:56 Check angles 15:04:56 SkyScan query 15:04:57 SkyScan query done: ret=0 az=117.66<-7844 ze=-33.795<-14253 Statuses=0009 0009 15:04:57 Msec=1500 True Az=117.66 Ze=-33.795 Az status=0009 Ze status=0009 15:04:57 Check angles 15:04:57 SkyScan query 15:04:57 SkyScan query done: ret=0 az=100.095<-6673 ze=-51.57<-15438 Statuses=0009 0009 15:04:57 Msec=2250 True Az=100.095 Ze=-51.57 Az status=0009 Ze status=0009 15:04:58 Check angles 15:04:58 SkyScan query 15:04:58 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 15:04:58 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 15:04:58 Check angles 15:04:58 SkyScan query 15:04:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:04:59 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:04:59 Message to Master queued w/err=0: serial=68552 error=0 15:05:04 Received message from Master: op=Filter serial=68553 15:05:04 Color wheel filter change from 0 to 0 15:05:04 FLIGetFilterPos err=0 currentPosition=0 15:05:04 FLIGetStepsRemaining err=0 RemainingSteps=0 15:05:04 Filter is already there-color wheel unchanged 15:05:04 Received message from Master: op=Shutter serial=68554 15:05:04 Shutter LASER close 15:05:04 Received message from Camera: op=State serial=68556 15:05:04 GetSingleValue result=40 Value=cccccccc 15:05:04 SkyScan query 15:05:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:05:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:05 Parameters OK 15:05:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:05 Set A/D data flow result=40 15:05:05 Set A/D channel type result=40 15:05:05 Set A/D encoding result=40 15:05:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:05 Set channel filter=0.000000e+000 result=40 15:05:05 Config A/D Result=40 15:05:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:05 Get A/D filter: -9.255963e+061 result=40 15:05:05 Get A/D value=-858993460 result=40 15:05:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:05 Parameters OK 15:05:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:05 Set A/D data flow result=40 15:05:05 Set A/D channel type result=40 15:05:05 Set A/D encoding result=40 15:05:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:05 Set channel filter=0.000000e+000 result=40 15:05:05 Config A/D Result=40 15:05:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:05 Get A/D filter: -9.255963e+061 result=40 15:05:05 Get A/D value=-858993460 result=40 15:05:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:05:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:05:05 Aux= 15:05:05 Message to Camera, serial 68556 queued 15:05:42 Received message from Master: op=PointingHead serial=68569 15:05:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:05:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:05:42 Point started: ret=0 15:05:42 point_skyscan result=0 15:05:43 Check angles 15:05:43 SkyScan query 15:05:43 SkyScan query done: ret=0 az=108.84<-7256 ze=-81.015<-17401 Statuses=0009 0009 15:05:43 Msec=0 True Az=108.84 Ze=-81.015 Az status=0009 Ze status=0009 15:05:43 Check angles 15:05:43 SkyScan query 15:05:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.405<-18827 Statuses=0008 0009 15:05:44 Msec=750 True Az=112.995 Ze=-102.405 Az status=0008 Ze status=0009 15:05:44 Check angles 15:05:44 SkyScan query 15:05:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.36<-20224 Statuses=0008 0009 15:05:45 Msec=1500 True Az=112.995 Ze=-123.36 Az status=0008 Ze status=0009 15:05:45 Check angles 15:05:45 SkyScan query 15:05:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.315<-21621 Statuses=0008 0009 15:05:45 Msec=2250 True Az=112.995 Ze=-144.315 Az status=0008 Ze status=0009 15:05:46 Check angles 15:05:46 SkyScan query 15:05:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.285<-23019 Statuses=0008 0009 15:05:46 Msec=3000 True Az=112.995 Ze=-165.285 Az status=0008 Ze status=0009 15:05:46 Check angles 15:05:46 SkyScan query 15:05:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:05:47 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:05:47 Message to Master queued w/err=0: serial=68569 error=0 15:05:52 Received message from Master: op=Filter serial=68570 15:05:52 Color wheel filter change from 0 to 0 15:05:52 FLIGetFilterPos err=0 currentPosition=0 15:05:52 FLIGetStepsRemaining err=0 RemainingSteps=0 15:05:52 Filter is already there-color wheel unchanged 15:05:52 Received message from Master: op=Shutter serial=68571 15:05:52 Shutter LASER open 15:05:52 Received message from Camera: op=State serial=68573 15:05:52 GetSingleValue result=40 Value=cccccccc 15:05:52 SkyScan query 15:05:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:05:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:53 Parameters OK 15:05:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:53 Set A/D data flow result=40 15:05:53 Set A/D channel type result=40 15:05:53 Set A/D encoding result=40 15:05:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:53 Set channel filter=0.000000e+000 result=40 15:05:53 Config A/D Result=40 15:05:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:53 Get A/D filter: -9.255963e+061 result=40 15:05:53 Get A/D value=-858993460 result=40 15:05:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:53 Parameters OK 15:05:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:53 Set A/D data flow result=40 15:05:53 Set A/D channel type result=40 15:05:53 Set A/D encoding result=40 15:05:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:53 Set channel filter=0.000000e+000 result=40 15:05:53 Config A/D Result=40 15:05:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:53 Get A/D filter: -9.255963e+061 result=40 15:05:53 Get A/D value=-858993460 result=40 15:05:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:05:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:05:53 Aux= 15:05:53 Message to Camera, serial 68573 queued 15:06:01 Received message from Master: op=Shutter serial=68583 15:06:01 Shutter LASER close 15:06:02 Received message from Master: op=PointingHead serial=68587 15:06:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:06:02 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-11 15:06:02] 15:06:02 Point started: ret=0 15:06:02 point_skyscan result=0 15:06:03 Check angles 15:06:03 SkyScan query 15:06:04 SkyScan query done: ret=0 az=88.305<-5887 ze=155.19<-1654 Statuses=0009 0009 15:06:04 Msec=0 True Az=88.305 Ze=155.19 Az status=0009 Ze status=0009 15:06:04 Check angles 15:06:04 SkyScan query 15:06:04 SkyScan query done: ret=0 az=70.47<-4698 ze=133.8<-3080 Statuses=0009 0009 15:06:04 Msec=750 True Az=70.47 Ze=133.8 Az status=0009 Ze status=0009 15:06:05 Check angles 15:06:05 SkyScan query 15:06:05 SkyScan query done: ret=0 az=52.815<-3521 ze=112.815<-4479 Statuses=0009 0009 15:06:05 Msec=1500 True Az=52.815 Ze=112.815 Az status=0009 Ze status=0009 15:06:05 Check angles 15:06:05 SkyScan query 15:06:06 SkyScan query done: ret=0 az=41.04<-2736 ze=91.875<-5875 Statuses=0009 0009 15:06:06 Msec=2250 True Az=41.04 Ze=91.875 Az status=0009 Ze status=0009 15:06:06 Check angles 15:06:06 SkyScan query 15:06:07 SkyScan query done: ret=0 az=40.995<-2733 ze=70.455<-7303 Statuses=0008 0009 15:06:07 Msec=3000 True Az=40.995 Ze=70.455 Az status=0008 Ze status=0009 15:06:07 Check angles 15:06:07 SkyScan query 15:06:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0009 15:06:07 Msec=3750 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0009 15:06:08 Check angles 15:06:08 SkyScan query 15:06:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:06:08 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:06:08 Message to Master queued w/err=0: serial=68587 error=0 15:06:13 Received message from Master: op=Filter serial=68588 15:06:13 Color wheel filter change from 0 to 0 15:06:13 FLIGetFilterPos err=0 currentPosition=0 15:06:13 FLIGetStepsRemaining err=0 RemainingSteps=0 15:06:13 Filter is already there-color wheel unchanged 15:06:13 Received message from Master: op=Shutter serial=68589 15:06:13 Shutter LASER close 15:06:13 Received message from Camera: op=State serial=68591 15:06:13 GetSingleValue result=40 Value=cccccccc 15:06:13 SkyScan query 15:06:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:06:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:14 Parameters OK 15:06:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:14 Set A/D data flow result=40 15:06:14 Set A/D channel type result=40 15:06:14 Set A/D encoding result=40 15:06:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:14 Set channel filter=0.000000e+000 result=40 15:06:14 Config A/D Result=40 15:06:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:14 Get A/D filter: -9.255963e+061 result=40 15:06:14 Get A/D value=-858993460 result=40 15:06:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:14 Parameters OK 15:06:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:14 Set A/D data flow result=40 15:06:14 Set A/D channel type result=40 15:06:14 Set A/D encoding result=40 15:06:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:14 Set channel filter=0.000000e+000 result=40 15:06:14 Config A/D Result=40 15:06:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:14 Get A/D filter: -9.255963e+061 result=40 15:06:14 Get A/D value=-858993460 result=40 15:06:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:06:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:06:14 Aux= 15:06:14 Message to Camera, serial 68591 queued 15:06:51 Received message from Master: op=PointingHead serial=68604 15:06:51 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:06:51 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:06:51 Point started: ret=0 15:06:51 point_skyscan result=0 15:06:52 Check angles 15:06:52 SkyScan query 15:06:53 SkyScan query done: ret=0 az=63.855<-4257 ze=66.555<-7563 Statuses=0009 0008 15:06:53 Msec=0 True Az=63.855 Ze=66.555 Az status=0009 Ze status=0008 15:06:53 Check angles 15:06:53 SkyScan query 15:06:53 SkyScan query done: ret=0 az=81.225<-5415 ze=66.51<-7566 Statuses=0009 0008 15:06:53 Msec=750 True Az=81.225 Ze=66.51 Az status=0009 Ze status=0008 15:06:54 Check angles 15:06:54 SkyScan query 15:06:54 SkyScan query done: ret=0 az=98.7<-6580 ze=66.495<-7567 Statuses=0009 0008 15:06:54 Msec=1500 True Az=98.7 Ze=66.495 Az status=0009 Ze status=0008 15:06:54 Check angles 15:06:54 SkyScan query 15:06:55 SkyScan query done: ret=0 az=116.295<-7753 ze=66.495<-7567 Statuses=0009 0008 15:06:55 Msec=2250 True Az=116.295 Ze=66.495 Az status=0009 Ze status=0008 15:06:55 Check angles 15:06:55 SkyScan query 15:06:56 SkyScan query done: ret=0 az=133.92<-8928 ze=66.495<-7567 Statuses=0009 0008 15:06:56 Msec=3000 True Az=133.92 Ze=66.495 Az status=0009 Ze status=0008 15:06:56 Check angles 15:06:56 SkyScan query 15:06:56 SkyScan query done: ret=0 az=151.275<-10085 ze=66.495<-7567 Statuses=0009 0008 15:06:56 Msec=3750 True Az=151.275 Ze=66.495 Az status=0009 Ze status=0008 15:06:57 Check angles 15:06:57 SkyScan query 15:06:57 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:06:57 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 15:06:57 Message to Master queued w/err=0: serial=68604 error=0 15:07:02 Received message from Master: op=Filter serial=68605 15:07:02 Color wheel filter change from 0 to 0 15:07:02 FLIGetFilterPos err=0 currentPosition=0 15:07:02 FLIGetStepsRemaining err=0 RemainingSteps=0 15:07:02 Filter is already there-color wheel unchanged 15:07:02 Received message from Master: op=Shutter serial=68606 15:07:02 Shutter LASER close 15:07:02 Received message from Camera: op=State serial=68608 15:07:02 GetSingleValue result=40 Value=cccccccc 15:07:02 SkyScan query 15:07:03 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:07:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:03 Parameters OK 15:07:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:03 Set A/D data flow result=40 15:07:03 Set A/D channel type result=40 15:07:03 Set A/D encoding result=40 15:07:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:03 Set channel filter=0.000000e+000 result=40 15:07:03 Config A/D Result=40 15:07:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:03 Get A/D filter: -9.255963e+061 result=40 15:07:03 Get A/D value=-858993460 result=40 15:07:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:03 Parameters OK 15:07:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:03 Set A/D data flow result=40 15:07:03 Set A/D channel type result=40 15:07:03 Set A/D encoding result=40 15:07:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:03 Set channel filter=0.000000e+000 result=40 15:07:03 Config A/D Result=40 15:07:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:03 Get A/D filter: -9.255963e+061 result=40 15:07:03 Get A/D value=-858993460 result=40 15:07:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:03 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:07:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:07:03 Aux= 15:07:03 Message to Camera, serial 68608 queued 15:07:40 Received message from Master: op=PointingHead serial=68621 15:07:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:07:40 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:07:40 Point started: ret=0 15:07:40 point_skyscan result=0 15:07:41 Check angles 15:07:41 SkyScan query 15:07:41 SkyScan query done: ret=0 az=135.135<-9009 ze=36.765<-9549 Statuses=0009 0009 15:07:41 Msec=0 True Az=135.135 Ze=36.765 Az status=0009 Ze status=0009 15:07:42 Check angles 15:07:42 SkyScan query 15:07:42 SkyScan query done: ret=0 az=117.585<-7839 ze=15.87<-10942 Statuses=0009 0009 15:07:42 Msec=750 True Az=117.585 Ze=15.87 Az status=0009 Ze status=0009 15:07:42 Check angles 15:07:42 SkyScan query 15:07:43 SkyScan query done: ret=0 az=100.23<-6682 ze=-5.085<-12339 Statuses=0009 0009 15:07:43 Msec=1500 True Az=100.23 Ze=-5.085 Az status=0009 Ze status=0009 15:07:43 Check angles 15:07:43 SkyScan query 15:07:44 SkyScan query done: ret=0 az=82.26<-5484 ze=-26.43<-13762 Statuses=0009 0009 15:07:44 Msec=2250 True Az=82.26 Ze=-26.43 Az status=0009 Ze status=0009 15:07:44 Check angles 15:07:44 SkyScan query 15:07:44 SkyScan query done: ret=0 az=64.845<-4323 ze=-38.58<-14572 Statuses=0009 0008 15:07:44 Msec=3000 True Az=64.845 Ze=-38.58 Az status=0009 Ze status=0008 15:07:45 Check angles 15:07:45 SkyScan query 15:07:45 SkyScan query done: ret=0 az=47.415<-3161 ze=-38.535<-14569 Statuses=0009 0008 15:07:45 Msec=3750 True Az=47.415 Ze=-38.535 Az status=0009 Ze status=0008 15:07:45 Check angles 15:07:45 SkyScan query 15:07:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:07:46 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:07:46 Message to Master queued w/err=0: serial=68621 error=0 15:07:51 Received message from Master: op=Filter serial=68622 15:07:51 Color wheel filter change from 0 to 0 15:07:51 FLIGetFilterPos err=0 currentPosition=0 15:07:51 FLIGetStepsRemaining err=0 RemainingSteps=0 15:07:51 Filter is already there-color wheel unchanged 15:07:51 Received message from Master: op=Shutter serial=68623 15:07:51 Shutter LASER close 15:07:51 Received message from Camera: op=State serial=68625 15:07:51 GetSingleValue result=40 Value=cccccccc 15:07:51 SkyScan query 15:07:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:07:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:52 Parameters OK 15:07:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:52 Set A/D data flow result=40 15:07:52 Set A/D channel type result=40 15:07:52 Set A/D encoding result=40 15:07:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:52 Set channel filter=0.000000e+000 result=40 15:07:52 Config A/D Result=40 15:07:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:52 Get A/D filter: -9.255963e+061 result=40 15:07:52 Get A/D value=-858993460 result=40 15:07:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:52 Parameters OK 15:07:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:52 Set A/D data flow result=40 15:07:52 Set A/D channel type result=40 15:07:52 Set A/D encoding result=40 15:07:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:52 Set channel filter=0.000000e+000 result=40 15:07:52 Config A/D Result=40 15:07:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:52 Get A/D filter: -9.255963e+061 result=40 15:07:52 Get A/D value=-858993460 result=40 15:07:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:07:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:07:52 Aux= 15:07:52 Message to Camera, serial 68625 queued 15:08:29 Received message from Master: op=PointingHead serial=68638 15:08:29 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:08:29 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:08:29 Point started: ret=0 15:08:29 point_skyscan result=0 15:08:30 Check angles 15:08:30 SkyScan query 15:08:30 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.685<-16579 Statuses=0009 0009 15:08:30 Msec=0 True Az=64.425 Ze=-68.685 Az status=0009 Ze status=0009 15:08:30 Check angles 15:08:30 SkyScan query 15:08:31 SkyScan query done: ret=0 az=82.095<-5473 ze=-90.09<-18006 Statuses=0009 0009 15:08:31 Msec=750 True Az=82.095 Ze=-90.09 Az status=0009 Ze status=0009 15:08:31 Check angles 15:08:31 SkyScan query 15:08:32 SkyScan query done: ret=0 az=100.095<-6673 ze=-111.435<-19429 Statuses=0009 0009 15:08:32 Msec=1500 True Az=100.095 Ze=-111.435 Az status=0009 Ze status=0009 15:08:32 Check angles 15:08:32 SkyScan query 15:08:33 SkyScan query done: ret=0 az=117.525<-7835 ze=-132.39<-20826 Statuses=0009 0009 15:08:33 Msec=2250 True Az=117.525 Ze=-132.39 Az status=0009 Ze status=0009 15:08:33 Check angles 15:08:33 SkyScan query 15:08:33 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.555<-21437 Statuses=0009 0008 15:08:33 Msec=3000 True Az=131.055 Ze=-141.555 Az status=0009 Ze status=0008 15:08:33 Check angles 15:08:33 SkyScan query 15:08:34 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 15:08:34 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 15:08:34 Message to Master queued w/err=0: serial=68638 error=0 15:08:39 Received message from Master: op=Filter serial=68639 15:08:39 Color wheel filter change from 0 to 0 15:08:39 FLIGetFilterPos err=0 currentPosition=0 15:08:39 FLIGetStepsRemaining err=0 RemainingSteps=0 15:08:39 Filter is already there-color wheel unchanged 15:08:39 Received message from Master: op=Shutter serial=68640 15:08:39 Shutter LASER close 15:08:39 Received message from Camera: op=State serial=68642 15:08:39 GetSingleValue result=40 Value=cccccccc 15:08:39 SkyScan query 15:08:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:08:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:40 Parameters OK 15:08:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:40 Set A/D data flow result=40 15:08:40 Set A/D channel type result=40 15:08:40 Set A/D encoding result=40 15:08:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:40 Set channel filter=0.000000e+000 result=40 15:08:40 Config A/D Result=40 15:08:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:40 Get A/D filter: -9.255963e+061 result=40 15:08:40 Get A/D value=-858993460 result=40 15:08:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:40 Parameters OK 15:08:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:40 Set A/D data flow result=40 15:08:40 Set A/D channel type result=40 15:08:40 Set A/D encoding result=40 15:08:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:40 Set channel filter=0.000000e+000 result=40 15:08:40 Config A/D Result=40 15:08:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:40 Get A/D filter: -9.255963e+061 result=40 15:08:40 Get A/D value=-858993460 result=40 15:08:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:40 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:08:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:08:40 Aux= 15:08:40 Message to Camera, serial 68642 queued 15:09:17 Received message from Master: op=PointingHead serial=68655 15:09:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:09:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:09:17 Point started: ret=0 15:09:17 point_skyscan result=0 15:09:18 Check angles 15:09:18 SkyScan query 15:09:18 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.48<-23432 Statuses=0009 0009 15:09:18 Msec=0 True Az=113.01 Ze=-171.48 Az status=0009 Ze status=0009 15:09:19 Check angles 15:09:19 SkyScan query 15:09:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:09:19 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:09:19 Message to Master queued w/err=0: serial=68655 error=0 15:09:24 Received message from Master: op=Filter serial=68656 15:09:24 Color wheel filter change from 0 to 0 15:09:24 FLIGetFilterPos err=0 currentPosition=0 15:09:24 FLIGetStepsRemaining err=0 RemainingSteps=0 15:09:24 Filter is already there-color wheel unchanged 15:09:24 Received message from Master: op=Shutter serial=68657 15:09:24 Shutter LASER open 15:09:24 Received message from Camera: op=State serial=68659 15:09:24 GetSingleValue result=40 Value=cccccccc 15:09:24 SkyScan query 15:09:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:09:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:25 Parameters OK 15:09:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:25 Set A/D data flow result=40 15:09:25 Set A/D channel type result=40 15:09:25 Set A/D encoding result=40 15:09:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:25 Set channel filter=0.000000e+000 result=40 15:09:25 Config A/D Result=40 15:09:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:25 Get A/D filter: -9.255963e+061 result=40 15:09:25 Get A/D value=-858993460 result=40 15:09:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:25 Parameters OK 15:09:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:25 Set A/D data flow result=40 15:09:25 Set A/D channel type result=40 15:09:25 Set A/D encoding result=40 15:09:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:25 Set channel filter=0.000000e+000 result=40 15:09:25 Config A/D Result=40 15:09:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:25 Get A/D filter: -9.255963e+061 result=40 15:09:25 Get A/D value=-858993460 result=40 15:09:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:09:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:09:25 Aux= 15:09:25 Message to Camera, serial 68659 queued 15:09:33 Received message from Master: op=Shutter serial=68669 15:09:33 Shutter LASER close 15:09:34 Received message from Master: op=PointingHead serial=68673 15:09:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:09:34 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:09:34 Point started: ret=0 15:09:34 point_skyscan result=0 15:09:35 Check angles 15:09:35 SkyScan query 15:09:36 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.49<-21566 Statuses=0009 0009 15:09:36 Msec=0 True Az=135.765 Ze=-143.49 Az status=0009 Ze status=0009 15:09:36 Check angles 15:09:36 SkyScan query 15:09:36 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.565<-20171 Statuses=0009 0009 15:09:36 Msec=750 True Az=153.24 Ze=-122.565 Az status=0009 Ze status=0009 15:09:37 Check angles 15:09:37 SkyScan query 15:09:37 SkyScan query done: ret=0 az=171.075<-11405 ze=-101.145<-18743 Statuses=0009 0009 15:09:37 Msec=1500 True Az=171.075 Ze=-101.145 Az status=0009 Ze status=0009 15:09:37 Check angles 15:09:37 SkyScan query 15:09:38 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.74<-17316 Statuses=0008 0009 15:09:38 Msec=2250 True Az=176.025 Ze=-79.74 Az status=0008 Ze status=0009 15:09:38 Check angles 15:09:38 SkyScan query 15:09:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.74<-15916 Statuses=0008 0009 15:09:39 Msec=3000 True Az=175.995 Ze=-58.74 Az status=0008 Ze status=0009 15:09:39 Check angles 15:09:39 SkyScan query 15:09:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:09:40 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:09:40 Message to Master queued w/err=0: serial=68673 error=0 15:09:45 Received message from Master: op=Filter serial=68674 15:09:45 Color wheel filter change from 0 to 0 15:09:45 FLIGetFilterPos err=0 currentPosition=0 15:09:45 FLIGetStepsRemaining err=0 RemainingSteps=0 15:09:45 Filter is already there-color wheel unchanged 15:09:45 Received message from Master: op=Shutter serial=68675 15:09:45 Shutter LASER close 15:09:45 Received message from Camera: op=State serial=68677 15:09:45 GetSingleValue result=40 Value=cccccccc 15:09:45 SkyScan query 15:09:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:09:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:45 Parameters OK 15:09:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:45 Set A/D data flow result=40 15:09:45 Set A/D channel type result=40 15:09:45 Set A/D encoding result=40 15:09:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:45 Set channel filter=0.000000e+000 result=40 15:09:45 Config A/D Result=40 15:09:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:45 Get A/D filter: -9.255963e+061 result=40 15:09:45 Get A/D value=-858993460 result=40 15:09:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:45 Parameters OK 15:09:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:45 Set A/D data flow result=40 15:09:45 Set A/D channel type result=40 15:09:45 Set A/D encoding result=40 15:09:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:45 Set channel filter=0.000000e+000 result=40 15:09:45 Config A/D Result=40 15:09:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:45 Get A/D filter: -9.255963e+061 result=40 15:09:45 Get A/D value=-858993460 result=40 15:09:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:09:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:09:45 Aux= 15:09:45 Message to Camera, serial 68677 queued 15:10:22 Received message from Master: op=PointingHead serial=68690 15:10:22 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:10:22 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:10:23 Point started: ret=0 15:10:23 point_skyscan result=0 15:10:23 Check angles 15:10:23 SkyScan query 15:10:24 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.81<-13454 Statuses=0009 0009 15:10:24 Msec=0 True Az=152.985 Ze=-21.81 Az status=0009 Ze status=0009 15:10:24 Check angles 15:10:24 SkyScan query 15:10:25 SkyScan query done: ret=0 az=135.525<-9035 ze=-0.825<-12055 Statuses=0009 0009 15:10:25 Msec=750 True Az=135.525 Ze=-0.825 Az status=0009 Ze status=0009 15:10:25 Check angles 15:10:25 SkyScan query 15:10:25 SkyScan query done: ret=0 az=118.035<-7869 ze=20.1<-10660 Statuses=0009 0009 15:10:25 Msec=1500 True Az=118.035 Ze=20.1 Az status=0009 Ze status=0009 15:10:26 Check angles 15:10:26 SkyScan query 15:10:26 SkyScan query done: ret=0 az=100.605<-6707 ze=41.055<-9263 Statuses=0009 0009 15:10:26 Msec=2250 True Az=100.605 Ze=41.055 Az status=0009 Ze status=0009 15:10:26 Check angles 15:10:26 SkyScan query 15:10:27 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 15:10:27 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 15:10:27 Check angles 15:10:27 SkyScan query 15:10:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:10:28 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:10:28 Message to Master queued w/err=0: serial=68690 error=0 15:10:33 Received message from Master: op=Filter serial=68691 15:10:33 Color wheel filter change from 0 to 0 15:10:33 FLIGetFilterPos err=0 currentPosition=0 15:10:33 FLIGetStepsRemaining err=0 RemainingSteps=0 15:10:33 Filter is already there-color wheel unchanged 15:10:33 Received message from Master: op=Shutter serial=68692 15:10:33 Shutter LASER close 15:10:33 Received message from Camera: op=State serial=68694 15:10:33 GetSingleValue result=40 Value=cccccccc 15:10:33 SkyScan query 15:10:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:10:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:33 Parameters OK 15:10:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:33 Set A/D data flow result=40 15:10:33 Set A/D channel type result=40 15:10:33 Set A/D encoding result=40 15:10:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:33 Set channel filter=0.000000e+000 result=40 15:10:33 Config A/D Result=40 15:10:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:33 Get A/D filter: -9.255963e+061 result=40 15:10:33 Get A/D value=-858993460 result=40 15:10:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:33 Parameters OK 15:10:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:33 Set A/D data flow result=40 15:10:33 Set A/D channel type result=40 15:10:33 Set A/D encoding result=40 15:10:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:33 Set channel filter=0.000000e+000 result=40 15:10:33 Config A/D Result=40 15:10:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:33 Get A/D filter: -9.255963e+061 result=40 15:10:33 Get A/D value=-858993460 result=40 15:10:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:10:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:10:33 Aux= 15:10:33 Message to Camera, serial 68694 queued 15:11:10 Received message from Master: op=PointingHead serial=68707 15:11:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:11:10 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:11:11 Point started: ret=0 15:11:11 point_skyscan result=0 15:11:11 Check angles 15:11:11 SkyScan query 15:11:12 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 15:11:12 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 15:11:12 Check angles 15:11:12 SkyScan query 15:11:13 SkyScan query done: ret=0 az=126.495<-8433 ze=38.505<-9433 Statuses=0009 0008 15:11:13 Msec=750 True Az=126.495 Ze=38.505 Az status=0009 Ze status=0008 15:11:13 Check angles 15:11:13 SkyScan query 15:11:14 SkyScan query done: ret=0 az=143.895<-9593 ze=38.505<-9433 Statuses=0009 0008 15:11:14 Msec=1500 True Az=143.895 Ze=38.505 Az status=0009 Ze status=0008 15:11:14 Check angles 15:11:14 SkyScan query 15:11:14 SkyScan query done: ret=0 az=161.37<-10758 ze=38.505<-9433 Statuses=0009 0008 15:11:14 Msec=2250 True Az=161.37 Ze=38.505 Az status=0009 Ze status=0008 15:11:14 Check angles 15:11:14 SkyScan query 15:11:15 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 15:11:15 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 15:11:15 Check angles 15:11:15 SkyScan query 15:11:16 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:11:16 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:11:16 Message to Master queued w/err=0: serial=68707 error=0 15:11:21 Received message from Master: op=Filter serial=68708 15:11:21 Color wheel filter change from 0 to 0 15:11:21 FLIGetFilterPos err=0 currentPosition=0 15:11:21 FLIGetStepsRemaining err=0 RemainingSteps=0 15:11:21 Filter is already there-color wheel unchanged 15:11:21 Received message from Master: op=Shutter serial=68709 15:11:21 Shutter LASER close 15:11:21 Received message from Camera: op=State serial=68711 15:11:21 GetSingleValue result=40 Value=cccccccc 15:11:21 SkyScan query 15:11:22 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:11:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:22 Parameters OK 15:11:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:22 Set A/D data flow result=40 15:11:22 Set A/D channel type result=40 15:11:22 Set A/D encoding result=40 15:11:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:22 Set channel filter=0.000000e+000 result=40 15:11:22 Config A/D Result=40 15:11:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:22 Get A/D filter: -9.255963e+061 result=40 15:11:22 Get A/D value=-858993460 result=40 15:11:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:22 Parameters OK 15:11:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:22 Set A/D data flow result=40 15:11:22 Set A/D channel type result=40 15:11:22 Set A/D encoding result=40 15:11:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:22 Set channel filter=0.000000e+000 result=40 15:11:22 Config A/D Result=40 15:11:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:22 Get A/D filter: -9.255963e+061 result=40 15:11:22 Get A/D value=-858993460 result=40 15:11:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:11:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:11:22 Aux= 15:11:22 Message to Camera, serial 68711 queued 15:11:58 Received message from Master: op=PointingHead serial=68724 15:11:58 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:11:58 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:11:59 Point started: ret=0 15:11:59 point_skyscan result=0 15:11:59 Check angles 15:11:59 SkyScan query 15:12:00 SkyScan query done: ret=0 az=153.24<-10216 ze=8.94<-11404 Statuses=0009 0009 15:12:00 Msec=0 True Az=153.24 Ze=8.94 Az status=0009 Ze status=0009 15:12:00 Check angles 15:12:00 SkyScan query 15:12:01 SkyScan query done: ret=0 az=135.855<-9057 ze=-12.03<-12802 Statuses=0009 0009 15:12:01 Msec=750 True Az=135.855 Ze=-12.03 Az status=0009 Ze status=0009 15:12:01 Check angles 15:12:01 SkyScan query 15:12:02 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.375<-14225 Statuses=0009 0009 15:12:02 Msec=1500 True Az=117.765 Ze=-33.375 Az status=0009 Ze status=0009 15:12:02 Check angles 15:12:02 SkyScan query 15:12:02 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.54<-15436 Statuses=0009 0009 15:12:02 Msec=2250 True Az=100.38 Ze=-51.54 Az status=0009 Ze status=0009 15:12:03 Check angles 15:12:03 SkyScan query 15:12:03 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 15:12:03 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 15:12:03 Check angles 15:12:03 SkyScan query 15:12:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:12:04 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:12:04 Message to Master queued w/err=0: serial=68724 error=0 15:12:09 Received message from Master: op=Filter serial=68725 15:12:09 Color wheel filter change from 0 to 0 15:12:09 FLIGetFilterPos err=0 currentPosition=0 15:12:09 FLIGetStepsRemaining err=0 RemainingSteps=0 15:12:09 Filter is already there-color wheel unchanged 15:12:09 Received message from Master: op=Shutter serial=68726 15:12:09 Shutter LASER close 15:12:09 Received message from Camera: op=State serial=68728 15:12:09 GetSingleValue result=40 Value=cccccccc 15:12:09 SkyScan query 15:12:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:12:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:10 Parameters OK 15:12:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:10 Set A/D data flow result=40 15:12:10 Set A/D channel type result=40 15:12:10 Set A/D encoding result=40 15:12:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:10 Set channel filter=0.000000e+000 result=40 15:12:10 Config A/D Result=40 15:12:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:10 Get A/D filter: -9.255963e+061 result=40 15:12:10 Get A/D value=-858993460 result=40 15:12:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:10 Parameters OK 15:12:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:10 Set A/D data flow result=40 15:12:10 Set A/D channel type result=40 15:12:10 Set A/D encoding result=40 15:12:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:10 Set channel filter=0.000000e+000 result=40 15:12:10 Config A/D Result=40 15:12:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:10 Get A/D filter: -9.255963e+061 result=40 15:12:10 Get A/D value=-858993460 result=40 15:12:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:12:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:12:10 Aux= 15:12:10 Message to Camera, serial 68728 queued 15:12:46 Received message from Master: op=PointingHead serial=68741 15:12:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:12:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:12:47 Point started: ret=0 15:12:47 point_skyscan result=0 15:12:48 Check angles 15:12:48 SkyScan query 15:12:48 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.105<-17407 Statuses=0009 0009 15:12:48 Msec=0 True Az=108.825 Ze=-81.105 Az status=0009 Ze status=0009 15:12:48 Check angles 15:12:48 SkyScan query 15:12:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.06<-18804 Statuses=0008 0009 15:12:49 Msec=750 True Az=112.995 Ze=-102.06 Az status=0008 Ze status=0009 15:12:49 Check angles 15:12:49 SkyScan query 15:12:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.03<-20202 Statuses=0008 0009 15:12:50 Msec=1500 True Az=112.995 Ze=-123.03 Az status=0008 Ze status=0009 15:12:50 Check angles 15:12:50 SkyScan query 15:12:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.985<-21599 Statuses=0008 0009 15:12:50 Msec=2250 True Az=112.995 Ze=-143.985 Az status=0008 Ze status=0009 15:12:51 Check angles 15:12:51 SkyScan query 15:12:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.94<-22996 Statuses=0008 0009 15:12:51 Msec=3000 True Az=112.995 Ze=-164.94 Az status=0008 Ze status=0009 15:12:51 Check angles 15:12:51 SkyScan query 15:12:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:12:52 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:12:52 Message to Master queued w/err=0: serial=68741 error=0 15:12:57 Received message from Master: op=Filter serial=68742 15:12:57 Color wheel filter change from 0 to 0 15:12:57 FLIGetFilterPos err=0 currentPosition=0 15:12:57 FLIGetStepsRemaining err=0 RemainingSteps=0 15:12:57 Filter is already there-color wheel unchanged 15:12:57 Received message from Master: op=Shutter serial=68743 15:12:57 Shutter LASER open 15:12:57 Received message from Camera: op=State serial=68745 15:12:57 GetSingleValue result=40 Value=cccccccc 15:12:57 SkyScan query 15:12:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:12:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:58 Parameters OK 15:12:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:58 Set A/D data flow result=40 15:12:58 Set A/D channel type result=40 15:12:58 Set A/D encoding result=40 15:12:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:58 Set channel filter=0.000000e+000 result=40 15:12:58 Config A/D Result=40 15:12:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:58 Get A/D filter: -9.255963e+061 result=40 15:12:58 Get A/D value=-858993460 result=40 15:12:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:58 Parameters OK 15:12:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:58 Set A/D data flow result=40 15:12:58 Set A/D channel type result=40 15:12:58 Set A/D encoding result=40 15:12:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:58 Set channel filter=0.000000e+000 result=40 15:12:58 Config A/D Result=40 15:12:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:58 Get A/D filter: -9.255963e+061 result=40 15:12:58 Get A/D value=-858993460 result=40 15:12:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:12:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:12:58 Aux= 15:12:58 Message to Camera, serial 68745 queued 15:13:06 Received message from Master: op=Shutter serial=68755 15:13:06 Shutter LASER close 15:13:07 Received message from Master: op=PointingHead serial=68759 15:13:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:13:07 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:13:07 Point started: ret=0 15:13:07 point_skyscan result=0 15:13:08 Check angles 15:13:08 SkyScan query 15:13:08 SkyScan query done: ret=0 az=90.135<-6009 ze=157.395<-1507 Statuses=0009 0009 15:13:08 Msec=0 True Az=90.135 Ze=157.395 Az status=0009 Ze status=0009 15:13:09 Check angles 15:13:09 SkyScan query 15:13:09 SkyScan query done: ret=0 az=72.69<-4846 ze=136.47<-2902 Statuses=0009 0009 15:13:09 Msec=750 True Az=72.69 Ze=136.47 Az status=0009 Ze status=0009 15:13:09 Check angles 15:13:09 SkyScan query 15:13:10 SkyScan query done: ret=0 az=54.855<-3657 ze=115.14<-4324 Statuses=0009 0009 15:13:10 Msec=1500 True Az=54.855 Ze=115.14 Az status=0009 Ze status=0009 15:13:10 Check angles 15:13:10 SkyScan query 15:13:11 SkyScan query done: ret=0 az=40.86<-2724 ze=94.14<-5724 Statuses=0009 0009 15:13:11 Msec=2250 True Az=40.86 Ze=94.14 Az status=0009 Ze status=0009 15:13:11 Check angles 15:13:11 SkyScan query 15:13:11 SkyScan query done: ret=0 az=40.995<-2733 ze=73.2<-7120 Statuses=0008 0009 15:13:11 Msec=3000 True Az=40.995 Ze=73.2 Az status=0008 Ze status=0009 15:13:12 Check angles 15:13:12 SkyScan query 15:13:12 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 15:13:12 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 15:13:12 Check angles 15:13:12 SkyScan query 15:13:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:13:13 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:13:13 Message to Master queued w/err=0: serial=68759 error=0 15:13:18 Received message from Master: op=Filter serial=68760 15:13:18 Color wheel filter change from 0 to 0 15:13:18 FLIGetFilterPos err=0 currentPosition=0 15:13:18 FLIGetStepsRemaining err=0 RemainingSteps=0 15:13:18 Filter is already there-color wheel unchanged 15:13:18 Received message from Master: op=Shutter serial=68761 15:13:18 Shutter LASER close 15:13:18 Received message from Camera: op=State serial=68763 15:13:18 GetSingleValue result=40 Value=cccccccc 15:13:18 SkyScan query 15:13:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:13:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:19 Parameters OK 15:13:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:19 Set A/D data flow result=40 15:13:19 Set A/D channel type result=40 15:13:19 Set A/D encoding result=40 15:13:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:19 Set channel filter=0.000000e+000 result=40 15:13:19 Config A/D Result=40 15:13:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:19 Get A/D filter: -9.255963e+061 result=40 15:13:19 Get A/D value=-858993460 result=40 15:13:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:19 Parameters OK 15:13:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:19 Set A/D data flow result=40 15:13:19 Set A/D channel type result=40 15:13:19 Set A/D encoding result=40 15:13:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:19 Set channel filter=0.000000e+000 result=40 15:13:19 Config A/D Result=40 15:13:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:19 Get A/D filter: -9.255963e+061 result=40 15:13:19 Get A/D value=-858993460 result=40 15:13:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:13:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:13:19 Aux= 15:13:19 Message to Camera, serial 68763 queued 15:13:56 Received message from Master: op=PointingHead serial=68776 15:13:56 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:13:56 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:13:56 Point started: ret=0 15:13:56 point_skyscan result=0 15:13:57 Check angles 15:13:57 SkyScan query 15:13:57 SkyScan query done: ret=0 az=64.41<-4294 ze=66.555<-7563 Statuses=0009 0008 15:13:57 Msec=0 True Az=64.41 Ze=66.555 Az status=0009 Ze status=0008 15:13:58 Check angles 15:13:58 SkyScan query 15:13:58 SkyScan query done: ret=0 az=81.675<-5445 ze=66.51<-7566 Statuses=0009 0008 15:13:58 Msec=750 True Az=81.675 Ze=66.51 Az status=0009 Ze status=0008 15:13:58 Check angles 15:13:58 SkyScan query 15:13:59 SkyScan query done: ret=0 az=99.405<-6627 ze=66.495<-7567 Statuses=0009 0008 15:13:59 Msec=1500 True Az=99.405 Ze=66.495 Az status=0009 Ze status=0008 15:13:59 Check angles 15:13:59 SkyScan query 15:14:00 SkyScan query done: ret=0 az=116.94<-7796 ze=66.495<-7567 Statuses=0009 0008 15:14:00 Msec=2250 True Az=116.94 Ze=66.495 Az status=0009 Ze status=0008 15:14:00 Check angles 15:14:00 SkyScan query 15:14:00 SkyScan query done: ret=0 az=134.325<-8955 ze=66.495<-7567 Statuses=0009 0008 15:14:00 Msec=3000 True Az=134.325 Ze=66.495 Az status=0009 Ze status=0008 15:14:01 Check angles 15:14:01 SkyScan query 15:14:01 SkyScan query done: ret=0 az=151.89<-10126 ze=66.495<-7567 Statuses=0009 0008 15:14:01 Msec=3750 True Az=151.89 Ze=66.495 Az status=0009 Ze status=0008 15:14:01 Check angles 15:14:01 SkyScan query 15:14:02 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 15:14:02 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 15:14:02 Message to Master queued w/err=0: serial=68776 error=0 15:14:07 Received message from Master: op=Filter serial=68777 15:14:07 Color wheel filter change from 0 to 0 15:14:07 FLIGetFilterPos err=0 currentPosition=0 15:14:07 FLIGetStepsRemaining err=0 RemainingSteps=0 15:14:07 Filter is already there-color wheel unchanged 15:14:07 Received message from Master: op=Shutter serial=68778 15:14:07 Shutter LASER close 15:14:07 Received message from Camera: op=State serial=68780 15:14:07 GetSingleValue result=40 Value=cccccccc 15:14:07 SkyScan query 15:14:08 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:14:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:08 Parameters OK 15:14:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:08 Set A/D data flow result=40 15:14:08 Set A/D channel type result=40 15:14:08 Set A/D encoding result=40 15:14:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:08 Set channel filter=0.000000e+000 result=40 15:14:08 Config A/D Result=40 15:14:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:08 Get A/D filter: -9.255963e+061 result=40 15:14:08 Get A/D value=-858993460 result=40 15:14:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:08 Parameters OK 15:14:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:08 Set A/D data flow result=40 15:14:08 Set A/D channel type result=40 15:14:08 Set A/D encoding result=40 15:14:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:08 Set channel filter=0.000000e+000 result=40 15:14:08 Config A/D Result=40 15:14:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:08 Get A/D filter: -9.255963e+061 result=40 15:14:08 Get A/D value=-858993460 result=40 15:14:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:08 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:14:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:14:08 Aux= 15:14:08 Message to Camera, serial 68780 queued 15:14:44 Received message from Master: op=PointingHead serial=68793 15:14:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:14:44 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:14:45 Point started: ret=0 15:14:45 point_skyscan result=0 15:14:46 Check angles 15:14:46 SkyScan query 15:14:46 SkyScan query done: ret=0 az=134.595<-8973 ze=36.42<-9572 Statuses=0009 0009 15:14:46 Msec=0 True Az=134.595 Ze=36.42 Az status=0009 Ze status=0009 15:14:46 Check angles 15:14:46 SkyScan query 15:14:47 SkyScan query done: ret=0 az=117.255<-7817 ze=15.495<-10967 Statuses=0009 0009 15:14:47 Msec=750 True Az=117.255 Ze=15.495 Az status=0009 Ze status=0009 15:14:47 Check angles 15:14:47 SkyScan query 15:14:48 SkyScan query done: ret=0 az=99.78<-6652 ze=-5.505<-12367 Statuses=0009 0009 15:14:48 Msec=1500 True Az=99.78 Ze=-5.505 Az status=0009 Ze status=0009 15:14:48 Check angles 15:14:48 SkyScan query 15:14:48 SkyScan query done: ret=0 az=82.035<-5469 ze=-26.94<-13796 Statuses=0009 0009 15:14:48 Msec=2250 True Az=82.035 Ze=-26.94 Az status=0009 Ze status=0009 15:14:49 Check angles 15:14:49 SkyScan query 15:14:49 SkyScan query done: ret=0 az=64.485<-4299 ze=-38.565<-14571 Statuses=0009 0008 15:14:49 Msec=3000 True Az=64.485 Ze=-38.565 Az status=0009 Ze status=0008 15:14:49 Check angles 15:14:49 SkyScan query 15:14:50 SkyScan query done: ret=0 az=47.085<-3139 ze=-38.535<-14569 Statuses=0009 0008 15:14:50 Msec=3750 True Az=47.085 Ze=-38.535 Az status=0009 Ze status=0008 15:14:50 Check angles 15:14:50 SkyScan query 15:14:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:14:51 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:14:51 Message to Master queued w/err=0: serial=68793 error=0 15:14:56 Received message from Master: op=Filter serial=68794 15:14:56 Color wheel filter change from 0 to 0 15:14:56 FLIGetFilterPos err=0 currentPosition=0 15:14:56 FLIGetStepsRemaining err=0 RemainingSteps=0 15:14:56 Filter is already there-color wheel unchanged 15:14:56 Received message from Master: op=Shutter serial=68795 15:14:56 Shutter LASER close 15:14:56 Received message from Camera: op=State serial=68797 15:14:56 GetSingleValue result=40 Value=cccccccc 15:14:56 SkyScan query 15:14:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:14:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:56 Parameters OK 15:14:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:56 Set A/D data flow result=40 15:14:56 Set A/D channel type result=40 15:14:56 Set A/D encoding result=40 15:14:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:56 Set channel filter=0.000000e+000 result=40 15:14:56 Config A/D Result=40 15:14:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:56 Get A/D filter: -9.255963e+061 result=40 15:14:56 Get A/D value=-858993460 result=40 15:14:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:56 Parameters OK 15:14:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:56 Set A/D data flow result=40 15:14:56 Set A/D channel type result=40 15:14:56 Set A/D encoding result=40 15:14:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:56 Set channel filter=0.000000e+000 result=40 15:14:56 Config A/D Result=40 15:14:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:56 Get A/D filter: -9.255963e+061 result=40 15:14:56 Get A/D value=-858993460 result=40 15:14:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:14:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:14:56 Aux= 15:14:56 Message to Camera, serial 68797 queued 15:15:29 Received message from Master: op=Identify serial=68802 15:15:33 Received message from Master: op=PointingHead serial=68813 15:15:33 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:15:33 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:15:34 Point started: ret=0 15:15:34 point_skyscan result=0 15:15:34 Check angles 15:15:34 SkyScan query 15:15:35 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.115<-16541 Statuses=0009 0009 15:15:35 Msec=0 True Az=63.81 Ze=-68.115 Az status=0009 Ze status=0009 15:15:35 Check angles 15:15:35 SkyScan query 15:15:36 SkyScan query done: ret=0 az=81.285<-5419 ze=-89.085<-17939 Statuses=0009 0009 15:15:36 Msec=750 True Az=81.285 Ze=-89.085 Az status=0009 Ze status=0009 15:15:36 Check angles 15:15:36 SkyScan query 15:15:36 SkyScan query done: ret=0 az=98.835<-6589 ze=-110.025<-19335 Statuses=0009 0009 15:15:36 Msec=1500 True Az=98.835 Ze=-110.025 Az status=0009 Ze status=0009 15:15:37 Check angles 15:15:37 SkyScan query 15:15:37 SkyScan query done: ret=0 az=116.73<-7782 ze=-131.43<-20762 Statuses=0009 0009 15:15:37 Msec=2250 True Az=116.73 Ze=-131.43 Az status=0009 Ze status=0009 15:15:37 Check angles 15:15:37 SkyScan query 15:15:38 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.555<-21437 Statuses=0009 0008 15:15:38 Msec=3000 True Az=131.145 Ze=-141.555 Az status=0009 Ze status=0008 15:15:38 Check angles 15:15:38 SkyScan query 15:15:39 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 15:15:39 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 15:15:39 Message to Master queued w/err=0: serial=68813 error=0 15:15:44 Received message from Master: op=Filter serial=68814 15:15:44 Color wheel filter change from 0 to 0 15:15:44 FLIGetFilterPos err=0 currentPosition=0 15:15:44 FLIGetStepsRemaining err=0 RemainingSteps=0 15:15:44 Filter is already there-color wheel unchanged 15:15:44 Received message from Master: op=Shutter serial=68815 15:15:44 Shutter LASER close 15:15:44 Received message from Camera: op=State serial=68817 15:15:44 GetSingleValue result=40 Value=cccccccc 15:15:44 SkyScan query 15:15:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:15:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:45 Parameters OK 15:15:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:45 Set A/D data flow result=40 15:15:45 Set A/D channel type result=40 15:15:45 Set A/D encoding result=40 15:15:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:45 Set channel filter=0.000000e+000 result=40 15:15:45 Config A/D Result=40 15:15:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:45 Get A/D filter: -9.255963e+061 result=40 15:15:45 Get A/D value=-858993460 result=40 15:15:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:45 Parameters OK 15:15:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:45 Set A/D data flow result=40 15:15:45 Set A/D channel type result=40 15:15:45 Set A/D encoding result=40 15:15:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:45 Set channel filter=0.000000e+000 result=40 15:15:45 Config A/D Result=40 15:15:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:45 Get A/D filter: -9.255963e+061 result=40 15:15:45 Get A/D value=-858993460 result=40 [UTC 2018-12-11 15:15:45] 15:15:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:45 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:15:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:15:45 Aux= 15:15:45 Message to Camera, serial 68817 queued [UTC 2018-12-11 15:15:54] 15:16:21 Received message from Master: op=PointingHead serial=68829 15:16:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:16:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:16:21 Point started: ret=0 15:16:21 point_skyscan result=0 15:16:22 Check angles 15:16:22 SkyScan query 15:16:22 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 15:16:22 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 15:16:22 Check angles 15:16:22 SkyScan query 15:16:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:16:23 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:16:23 Message to Master queued w/err=0: serial=68829 error=0 15:16:28 Received message from Master: op=Filter serial=68830 15:16:28 Color wheel filter change from 0 to 0 15:16:28 FLIGetFilterPos err=0 currentPosition=0 15:16:28 FLIGetStepsRemaining err=0 RemainingSteps=0 15:16:28 Filter is already there-color wheel unchanged 15:16:28 Received message from Master: op=Shutter serial=68831 15:16:28 Shutter LASER open 15:16:28 Received message from Camera: op=State serial=68833 15:16:28 GetSingleValue result=40 Value=cccccccc 15:16:28 SkyScan query 15:16:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:16:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:29 Parameters OK 15:16:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:29 Set A/D data flow result=40 15:16:29 Set A/D channel type result=40 15:16:29 Set A/D encoding result=40 15:16:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:29 Set channel filter=0.000000e+000 result=40 15:16:29 Config A/D Result=40 15:16:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:29 Get A/D filter: -9.255963e+061 result=40 15:16:29 Get A/D value=-858993460 result=40 15:16:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:29 Parameters OK 15:16:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:29 Set A/D data flow result=40 15:16:29 Set A/D channel type result=40 15:16:29 Set A/D encoding result=40 15:16:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:29 Set channel filter=0.000000e+000 result=40 15:16:29 Config A/D Result=40 15:16:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:29 Get A/D filter: -9.255963e+061 result=40 15:16:29 Get A/D value=-858993460 result=40 15:16:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:16:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:16:29 Aux= 15:16:29 Message to Camera, serial 68833 queued 15:16:37 Received message from Master: op=Shutter serial=68843 15:16:37 Shutter LASER close 15:16:38 Received message from Master: op=PointingHead serial=68847 15:16:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:16:38 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:16:38 Point started: ret=0 15:16:38 point_skyscan result=0 15:16:39 Check angles 15:16:39 SkyScan query 15:16:40 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.535<-21569 Statuses=0009 0009 15:16:40 Msec=0 True Az=135.705 Ze=-143.535 Az status=0009 Ze status=0009 15:16:40 Check angles 15:16:40 SkyScan query 15:16:40 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.04<-20136 Statuses=0009 0009 15:16:40 Msec=750 True Az=153.57 Ze=-122.04 Az status=0009 Ze status=0009 15:16:41 Check angles 15:16:41 SkyScan query 15:16:41 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.71<-18714 Statuses=0009 0009 15:16:41 Msec=1500 True Az=171.405 Ze=-100.71 Az status=0009 Ze status=0009 15:16:41 Check angles 15:16:41 SkyScan query 15:16:42 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.8<-17320 Statuses=0008 0009 15:16:42 Msec=2250 True Az=176.025 Ze=-79.8 Az status=0008 Ze status=0009 15:16:42 Check angles 15:16:42 SkyScan query 15:16:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.815<-15921 Statuses=0008 0009 15:16:43 Msec=3000 True Az=175.995 Ze=-58.815 Az status=0008 Ze status=0009 15:16:43 Check angles 15:16:43 SkyScan query 15:16:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 15:16:43 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 15:16:43 Message to Master queued w/err=0: serial=68847 error=0 15:16:48 Received message from Master: op=Filter serial=68848 15:16:48 Color wheel filter change from 0 to 0 15:16:48 FLIGetFilterPos err=0 currentPosition=0 15:16:48 FLIGetStepsRemaining err=0 RemainingSteps=0 15:16:48 Filter is already there-color wheel unchanged 15:16:49 Received message from Master: op=Shutter serial=68849 15:16:49 Shutter LASER close 15:16:49 Received message from Camera: op=State serial=68851 15:16:49 GetSingleValue result=40 Value=cccccccc 15:16:49 SkyScan query 15:16:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:16:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:49 Parameters OK 15:16:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:49 Set A/D data flow result=40 15:16:49 Set A/D channel type result=40 15:16:49 Set A/D encoding result=40 15:16:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:49 Set channel filter=0.000000e+000 result=40 15:16:49 Config A/D Result=40 15:16:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:49 Get A/D filter: -9.255963e+061 result=40 15:16:49 Get A/D value=-858993460 result=40 15:16:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:49 Parameters OK 15:16:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:49 Set A/D data flow result=40 15:16:49 Set A/D channel type result=40 15:16:49 Set A/D encoding result=40 15:16:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:49 Set channel filter=0.000000e+000 result=40 15:16:49 Config A/D Result=40 15:16:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:49 Get A/D filter: -9.255963e+061 result=40 15:16:49 Get A/D value=-858993460 result=40 15:16:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:16:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:16:49 Aux= 15:16:49 Message to Camera, serial 68851 queued 15:17:26 Received message from Master: op=PointingHead serial=68864 15:17:26 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:17:26 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:17:27 Point started: ret=0 15:17:27 point_skyscan result=0 15:17:27 Check angles 15:17:27 SkyScan query 15:17:28 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.93<-13462 Statuses=0009 0009 15:17:28 Msec=0 True Az=153.12 Ze=-21.93 Az status=0009 Ze status=0009 15:17:28 Check angles 15:17:28 SkyScan query 15:17:29 SkyScan query done: ret=0 az=135.75<-9050 ze=-0.945<-12063 Statuses=0009 0009 15:17:29 Msec=750 True Az=135.75 Ze=-0.945 Az status=0009 Ze status=0009 15:17:29 Check angles 15:17:29 SkyScan query 15:17:29 SkyScan query done: ret=0 az=117.765<-7851 ze=20.43<-10638 Statuses=0009 0009 15:17:29 Msec=1500 True Az=117.765 Ze=20.43 Az status=0009 Ze status=0009 15:17:30 Check angles 15:17:30 SkyScan query 15:17:30 SkyScan query done: ret=0 az=100.335<-6689 ze=41.415<-9239 Statuses=0009 0009 15:17:30 Msec=2250 True Az=100.335 Ze=41.415 Az status=0009 Ze status=0009 15:17:30 Check angles 15:17:30 SkyScan query 15:17:31 SkyScan query done: ret=0 az=86.04<-5736 ze=51.54<-8564 Statuses=0009 0008 15:17:31 Msec=3000 True Az=86.04 Ze=51.54 Az status=0009 Ze status=0008 15:17:31 Check angles 15:17:31 SkyScan query 15:17:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.525<-8565 Statuses=0008 0008 15:17:32 Msec=3750 True Az=85.995 Ze=51.525 Az status=0008 Ze status=0008 15:17:32 Message to Master queued w/err=0: serial=68864 error=0 15:17:37 Received message from Master: op=Filter serial=68865 15:17:37 Color wheel filter change from 0 to 0 15:17:37 FLIGetFilterPos err=0 currentPosition=0 15:17:37 FLIGetStepsRemaining err=0 RemainingSteps=0 15:17:37 Filter is already there-color wheel unchanged 15:17:37 Received message from Master: op=Shutter serial=68866 15:17:37 Shutter LASER close 15:17:37 Received message from Camera: op=State serial=68868 15:17:37 GetSingleValue result=40 Value=cccccccc 15:17:37 SkyScan query 15:17:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:17:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:37 Parameters OK 15:17:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:37 Set A/D data flow result=40 15:17:37 Set A/D channel type result=40 15:17:37 Set A/D encoding result=40 15:17:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:37 Set channel filter=0.000000e+000 result=40 15:17:37 Config A/D Result=40 15:17:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:37 Get A/D filter: -9.255963e+061 result=40 15:17:37 Get A/D value=-858993460 result=40 15:17:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:37 Parameters OK 15:17:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:37 Set A/D data flow result=40 15:17:37 Set A/D channel type result=40 15:17:37 Set A/D encoding result=40 15:17:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:37 Set channel filter=0.000000e+000 result=40 15:17:37 Config A/D Result=40 15:17:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:37 Get A/D filter: -9.255963e+061 result=40 15:17:37 Get A/D value=-858993460 result=40 15:17:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:17:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:17:37 Aux= 15:17:37 Message to Camera, serial 68868 queued 15:18:14 Received message from Master: op=PointingHead serial=68881 15:18:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:18:14 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:18:15 Point started: ret=0 15:18:15 point_skyscan result=0 15:18:15 Check angles 15:18:15 SkyScan query 15:18:16 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 15:18:16 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 15:18:16 Check angles 15:18:16 SkyScan query 15:18:17 SkyScan query done: ret=0 az=126.66<-8444 ze=38.505<-9433 Statuses=0009 0008 15:18:17 Msec=750 True Az=126.66 Ze=38.505 Az status=0009 Ze status=0008 15:18:17 Check angles 15:18:17 SkyScan query 15:18:17 SkyScan query done: ret=0 az=143.985<-9599 ze=38.505<-9433 Statuses=0009 0008 15:18:17 Msec=1500 True Az=143.985 Ze=38.505 Az status=0009 Ze status=0008 15:18:18 Check angles 15:18:18 SkyScan query 15:18:18 SkyScan query done: ret=0 az=161.355<-10757 ze=38.505<-9433 Statuses=0009 0008 15:18:18 Msec=2250 True Az=161.355 Ze=38.505 Az status=0009 Ze status=0008 15:18:18 Check angles 15:18:18 SkyScan query 15:18:19 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 15:18:19 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 15:18:19 Check angles 15:18:19 SkyScan query 15:18:20 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:18:20 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:18:20 Message to Master queued w/err=0: serial=68881 error=0 15:18:25 Received message from Master: op=Filter serial=68882 15:18:25 Color wheel filter change from 0 to 0 15:18:25 FLIGetFilterPos err=0 currentPosition=0 15:18:25 FLIGetStepsRemaining err=0 RemainingSteps=0 15:18:25 Filter is already there-color wheel unchanged 15:18:25 Received message from Master: op=Shutter serial=68883 15:18:25 Shutter LASER close 15:18:25 Received message from Camera: op=State serial=68885 15:18:25 GetSingleValue result=40 Value=cccccccc 15:18:25 SkyScan query 15:18:25 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:18:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:25 Parameters OK 15:18:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:25 Set A/D data flow result=40 15:18:25 Set A/D channel type result=40 15:18:25 Set A/D encoding result=40 15:18:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:25 Set channel filter=0.000000e+000 result=40 15:18:25 Config A/D Result=40 15:18:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:25 Get A/D filter: -9.255963e+061 result=40 15:18:25 Get A/D value=-858993460 result=40 15:18:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:25 Parameters OK 15:18:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:25 Set A/D data flow result=40 15:18:25 Set A/D channel type result=40 15:18:25 Set A/D encoding result=40 15:18:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:25 Set channel filter=0.000000e+000 result=40 15:18:25 Config A/D Result=40 15:18:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:25 Get A/D filter: -9.255963e+061 result=40 15:18:25 Get A/D value=-858993460 result=40 15:18:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:18:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:18:25 Aux= 15:18:25 Message to Camera, serial 68885 queued 15:19:02 Received message from Master: op=PointingHead serial=68898 15:19:02 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:19:02 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:19:03 Point started: ret=0 15:19:03 point_skyscan result=0 15:19:03 Check angles 15:19:03 SkyScan query 15:19:04 SkyScan query done: ret=0 az=152.94<-10196 ze=8.655<-11423 Statuses=0009 0009 15:19:04 Msec=0 True Az=152.94 Ze=8.655 Az status=0009 Ze status=0009 15:19:04 Check angles 15:19:04 SkyScan query 15:19:05 SkyScan query done: ret=0 az=135.21<-9014 ze=-12.72<-12848 Statuses=0009 0009 15:19:05 Msec=750 True Az=135.21 Ze=-12.72 Az status=0009 Ze status=0009 15:19:05 Check angles 15:19:05 SkyScan query 15:19:06 SkyScan query done: ret=0 az=117.105<-7807 ze=-34.155<-14277 Statuses=0009 0009 15:19:06 Msec=1500 True Az=117.105 Ze=-34.155 Az status=0009 Ze status=0009 15:19:06 Check angles 15:19:06 SkyScan query 15:19:06 SkyScan query done: ret=0 az=99.81<-6654 ze=-51.555<-15437 Statuses=0009 0009 15:19:06 Msec=2250 True Az=99.81 Ze=-51.555 Az status=0009 Ze status=0009 15:19:06 Check angles 15:19:06 SkyScan query 15:19:07 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 15:19:07 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 15:19:07 Check angles 15:19:07 SkyScan query 15:19:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:19:08 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:19:08 Message to Master queued w/err=0: serial=68898 error=0 15:19:13 Received message from Master: op=Filter serial=68899 15:19:13 Color wheel filter change from 0 to 0 15:19:13 FLIGetFilterPos err=0 currentPosition=0 15:19:13 FLIGetStepsRemaining err=0 RemainingSteps=0 15:19:13 Filter is already there-color wheel unchanged 15:19:13 Received message from Master: op=Shutter serial=68900 15:19:13 Shutter LASER close 15:19:13 Received message from Camera: op=State serial=68902 15:19:13 GetSingleValue result=40 Value=cccccccc 15:19:13 SkyScan query 15:19:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:19:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:14 Parameters OK 15:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:14 Set A/D data flow result=40 15:19:14 Set A/D channel type result=40 15:19:14 Set A/D encoding result=40 15:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:14 Set channel filter=0.000000e+000 result=40 15:19:14 Config A/D Result=40 15:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:14 Get A/D filter: -9.255963e+061 result=40 15:19:14 Get A/D value=-858993460 result=40 15:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:14 Parameters OK 15:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:14 Set A/D data flow result=40 15:19:14 Set A/D channel type result=40 15:19:14 Set A/D encoding result=40 15:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:14 Set channel filter=0.000000e+000 result=40 15:19:14 Config A/D Result=40 15:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:14 Get A/D filter: -9.255963e+061 result=40 15:19:14 Get A/D value=-858993460 result=40 15:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:19:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:19:14 Aux= 15:19:14 Message to Camera, serial 68902 queued 15:19:50 Received message from Master: op=PointingHead serial=68915 15:19:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:19:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:19:51 Point started: ret=0 15:19:51 point_skyscan result=0 15:19:51 Check angles 15:19:51 SkyScan query 15:19:52 SkyScan query done: ret=0 az=108.84<-7256 ze=-81<-17400 Statuses=0009 0009 15:19:52 Msec=0 True Az=108.84 Ze=-81 Az status=0009 Ze status=0009 15:19:52 Check angles 15:19:52 SkyScan query 15:19:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.955<-18797 Statuses=0008 0009 15:19:53 Msec=750 True Az=112.995 Ze=-101.955 Az status=0008 Ze status=0009 15:19:53 Check angles 15:19:53 SkyScan query 15:19:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.36<-20224 Statuses=0008 0009 15:19:54 Msec=1500 True Az=112.995 Ze=-123.36 Az status=0008 Ze status=0009 15:19:54 Check angles 15:19:54 SkyScan query 15:19:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.765<-21651 Statuses=0008 0009 15:19:54 Msec=2250 True Az=112.995 Ze=-144.765 Az status=0008 Ze status=0009 15:19:55 Check angles 15:19:55 SkyScan query 15:19:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.72<-23048 Statuses=0008 0009 15:19:55 Msec=3000 True Az=112.995 Ze=-165.72 Az status=0008 Ze status=0009 15:19:55 Check angles 15:19:55 SkyScan query 15:19:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:19:56 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:19:56 Message to Master queued w/err=0: serial=68915 error=0 15:20:01 Received message from Master: op=Filter serial=68916 15:20:01 Color wheel filter change from 0 to 0 15:20:01 FLIGetFilterPos err=0 currentPosition=0 15:20:01 FLIGetStepsRemaining err=0 RemainingSteps=0 15:20:01 Filter is already there-color wheel unchanged 15:20:01 Received message from Master: op=Shutter serial=68917 15:20:01 Shutter LASER open 15:20:01 Received message from Camera: op=State serial=68919 15:20:01 GetSingleValue result=40 Value=cccccccc 15:20:01 SkyScan query 15:20:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:20:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:02 Parameters OK 15:20:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:02 Set A/D data flow result=40 15:20:02 Set A/D channel type result=40 15:20:02 Set A/D encoding result=40 15:20:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:02 Set channel filter=0.000000e+000 result=40 15:20:02 Config A/D Result=40 15:20:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:02 Get A/D filter: -9.255963e+061 result=40 15:20:02 Get A/D value=-858993460 result=40 15:20:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:02 Parameters OK 15:20:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:02 Set A/D data flow result=40 15:20:02 Set A/D channel type result=40 15:20:02 Set A/D encoding result=40 15:20:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:02 Set channel filter=0.000000e+000 result=40 15:20:02 Config A/D Result=40 15:20:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:02 Get A/D filter: -9.255963e+061 result=40 15:20:02 Get A/D value=-858993460 result=40 15:20:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:20:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:20:02 Aux= 15:20:02 Message to Camera, serial 68919 queued 15:20:10 Received message from Master: op=Shutter serial=68929 15:20:10 Shutter LASER close 15:20:11 Received message from Master: op=PointingHead serial=68933 15:20:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:20:11 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:20:11 Point started: ret=0 15:20:11 point_skyscan result=0 15:20:12 Check angles 15:20:12 SkyScan query 15:20:12 SkyScan query done: ret=0 az=89.895<-5993 ze=157.305<-1513 Statuses=0009 0009 15:20:12 Msec=0 True Az=89.895 Ze=157.305 Az status=0009 Ze status=0009 15:20:13 Check angles 15:20:13 SkyScan query 15:20:13 SkyScan query done: ret=0 az=72.495<-4833 ze=136.335<-2911 Statuses=0009 0009 15:20:13 Msec=750 True Az=72.495 Ze=136.335 Az status=0009 Ze status=0009 15:20:13 Check angles 15:20:13 SkyScan query 15:20:14 SkyScan query done: ret=0 az=55.005<-3667 ze=115.425<-4305 Statuses=0009 0009 15:20:14 Msec=1500 True Az=55.005 Ze=115.425 Az status=0009 Ze status=0009 15:20:14 Check angles 15:20:14 SkyScan query 15:20:15 SkyScan query done: ret=0 az=40.86<-2724 ze=94.41<-5706 Statuses=0009 0009 15:20:15 Msec=2250 True Az=40.86 Ze=94.41 Az status=0009 Ze status=0009 15:20:15 Check angles 15:20:15 SkyScan query 15:20:15 SkyScan query done: ret=0 az=40.995<-2733 ze=73.425<-7105 Statuses=0008 0009 15:20:15 Msec=3000 True Az=40.995 Ze=73.425 Az status=0008 Ze status=0009 15:20:16 Check angles 15:20:16 SkyScan query 15:20:16 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 15:20:16 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 15:20:16 Check angles 15:20:16 SkyScan query 15:20:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:20:17 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:20:17 Message to Master queued w/err=0: serial=68933 error=0 15:20:22 Received message from Master: op=Filter serial=68934 15:20:22 Color wheel filter change from 0 to 0 15:20:22 FLIGetFilterPos err=0 currentPosition=0 15:20:22 FLIGetStepsRemaining err=0 RemainingSteps=0 15:20:22 Filter is already there-color wheel unchanged 15:20:22 Received message from Master: op=Shutter serial=68935 15:20:22 Shutter LASER close 15:20:22 Received message from Camera: op=State serial=68937 15:20:22 GetSingleValue result=40 Value=cccccccc 15:20:22 SkyScan query 15:20:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:20:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:23 Parameters OK 15:20:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:23 Set A/D data flow result=40 15:20:23 Set A/D channel type result=40 15:20:23 Set A/D encoding result=40 15:20:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:23 Set channel filter=0.000000e+000 result=40 15:20:23 Config A/D Result=40 15:20:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:23 Get A/D filter: -9.255963e+061 result=40 15:20:23 Get A/D value=-858993460 result=40 15:20:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:23 Parameters OK 15:20:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:23 Set A/D data flow result=40 15:20:23 Set A/D channel type result=40 15:20:23 Set A/D encoding result=40 15:20:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:23 Set channel filter=0.000000e+000 result=40 15:20:23 Config A/D Result=40 15:20:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:23 Get A/D filter: -9.255963e+061 result=40 15:20:23 Get A/D value=-858993460 result=40 15:20:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:20:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:20:23 Aux= 15:20:23 Message to Camera, serial 68937 queued 15:21:00 Received message from Master: op=PointingHead serial=68950 15:21:00 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:21:00 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:21:00 Point started: ret=0 15:21:00 point_skyscan result=0 15:21:01 Check angles 15:21:01 SkyScan query 15:21:01 SkyScan query done: ret=0 az=63.795<-4253 ze=66.54<-7564 Statuses=0009 0008 15:21:01 Msec=0 True Az=63.795 Ze=66.54 Az status=0009 Ze status=0008 15:21:02 Check angles 15:21:02 SkyScan query 15:21:02 SkyScan query done: ret=0 az=81.645<-5443 ze=66.495<-7567 Statuses=0009 0008 15:21:02 Msec=750 True Az=81.645 Ze=66.495 Az status=0009 Ze status=0008 15:21:02 Check angles 15:21:02 SkyScan query 15:21:03 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 15:21:03 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 15:21:03 Check angles 15:21:03 SkyScan query 15:21:04 SkyScan query done: ret=0 az=116.76<-7784 ze=66.495<-7567 Statuses=0009 0008 15:21:04 Msec=2250 True Az=116.76 Ze=66.495 Az status=0009 Ze status=0008 15:21:04 Check angles 15:21:04 SkyScan query 15:21:04 SkyScan query done: ret=0 az=134.25<-8950 ze=66.495<-7567 Statuses=0009 0008 15:21:04 Msec=3000 True Az=134.25 Ze=66.495 Az status=0009 Ze status=0008 15:21:05 Check angles 15:21:05 SkyScan query 15:21:05 SkyScan query done: ret=0 az=151.65<-10110 ze=66.495<-7567 Statuses=0009 0008 15:21:05 Msec=3750 True Az=151.65 Ze=66.495 Az status=0009 Ze status=0008 15:21:05 Check angles 15:21:05 SkyScan query 15:21:06 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 15:21:06 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 15:21:06 Message to Master queued w/err=0: serial=68950 error=0 15:21:11 Received message from Master: op=Filter serial=68951 15:21:11 Color wheel filter change from 0 to 0 15:21:11 FLIGetFilterPos err=0 currentPosition=0 15:21:11 FLIGetStepsRemaining err=0 RemainingSteps=0 15:21:11 Filter is already there-color wheel unchanged 15:21:11 Received message from Master: op=Shutter serial=68952 15:21:11 Shutter LASER close 15:21:11 Received message from Camera: op=State serial=68954 15:21:11 GetSingleValue result=40 Value=cccccccc 15:21:11 SkyScan query 15:21:12 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:21:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:12 Parameters OK 15:21:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:12 Set A/D data flow result=40 15:21:12 Set A/D channel type result=40 15:21:12 Set A/D encoding result=40 15:21:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:12 Set channel filter=0.000000e+000 result=40 15:21:12 Config A/D Result=40 15:21:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:12 Get A/D filter: -9.255963e+061 result=40 15:21:12 Get A/D value=-858993460 result=40 15:21:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:12 Parameters OK 15:21:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:12 Set A/D data flow result=40 15:21:12 Set A/D channel type result=40 15:21:12 Set A/D encoding result=40 15:21:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:12 Set channel filter=0.000000e+000 result=40 15:21:12 Config A/D Result=40 15:21:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:12 Get A/D filter: -9.255963e+061 result=40 15:21:12 Get A/D value=-858993460 result=40 15:21:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:12 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:21:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:21:12 Aux= 15:21:12 Message to Camera, serial 68954 queued 15:21:48 Received message from Master: op=PointingHead serial=68967 15:21:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:21:48 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:21:49 Point started: ret=0 15:21:49 point_skyscan result=0 15:21:50 Check angles 15:21:50 SkyScan query 15:21:50 SkyScan query done: ret=0 az=134.82<-8988 ze=36.48<-9568 Statuses=0009 0009 15:21:50 Msec=0 True Az=134.82 Ze=36.48 Az status=0009 Ze status=0009 15:21:50 Check angles 15:21:50 SkyScan query 15:21:51 SkyScan query done: ret=0 az=117.285<-7819 ze=15.57<-10962 Statuses=0009 0009 15:21:51 Msec=750 True Az=117.285 Ze=15.57 Az status=0009 Ze status=0009 15:21:51 Check angles 15:21:51 SkyScan query 15:21:52 SkyScan query done: ret=0 az=99.81<-6654 ze=-5.415<-12361 Statuses=0009 0009 15:21:52 Msec=1500 True Az=99.81 Ze=-5.415 Az status=0009 Ze status=0009 15:21:52 Check angles 15:21:52 SkyScan query 15:21:52 SkyScan query done: ret=0 az=82.11<-5474 ze=-26.82<-13788 Statuses=0009 0009 15:21:52 Msec=2250 True Az=82.11 Ze=-26.82 Az status=0009 Ze status=0009 15:21:53 Check angles 15:21:53 SkyScan query 15:21:53 SkyScan query done: ret=0 az=64.545<-4303 ze=-38.565<-14571 Statuses=0009 0008 15:21:53 Msec=3000 True Az=64.545 Ze=-38.565 Az status=0009 Ze status=0008 15:21:53 Check angles 15:21:53 SkyScan query 15:21:54 SkyScan query done: ret=0 az=47.085<-3139 ze=-38.535<-14569 Statuses=0009 0008 15:21:54 Msec=3750 True Az=47.085 Ze=-38.535 Az status=0009 Ze status=0008 15:21:54 Check angles 15:21:54 SkyScan query 15:21:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:21:55 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:21:55 Message to Master queued w/err=0: serial=68967 error=0 15:22:00 Received message from Master: op=Filter serial=68968 15:22:00 Color wheel filter change from 0 to 0 15:22:00 FLIGetFilterPos err=0 currentPosition=0 15:22:00 FLIGetStepsRemaining err=0 RemainingSteps=0 15:22:00 Filter is already there-color wheel unchanged 15:22:00 Received message from Master: op=Shutter serial=68969 15:22:00 Shutter LASER close 15:22:00 Received message from Camera: op=State serial=68971 15:22:00 GetSingleValue result=40 Value=cccccccc 15:22:00 SkyScan query 15:22:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:22:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:00 Parameters OK 15:22:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:00 Set A/D data flow result=40 15:22:00 Set A/D channel type result=40 15:22:00 Set A/D encoding result=40 15:22:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:00 Set channel filter=0.000000e+000 result=40 15:22:00 Config A/D Result=40 15:22:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:00 Get A/D filter: -9.255963e+061 result=40 15:22:00 Get A/D value=-858993460 result=40 15:22:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:00 Parameters OK 15:22:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:00 Set A/D data flow result=40 15:22:00 Set A/D channel type result=40 15:22:00 Set A/D encoding result=40 15:22:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:00 Set channel filter=0.000000e+000 result=40 15:22:00 Config A/D Result=40 15:22:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:00 Get A/D filter: -9.255963e+061 result=40 15:22:00 Get A/D value=-858993460 result=40 15:22:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:22:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:22:00 Aux= 15:22:00 Message to Camera, serial 68971 queued 15:22:37 Received message from Master: op=PointingHead serial=68984 15:22:37 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:22:37 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:22:38 Point started: ret=0 15:22:38 point_skyscan result=0 15:22:38 Check angles 15:22:38 SkyScan query 15:22:39 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.805<-16587 Statuses=0009 0009 15:22:39 Msec=0 True Az=64.425 Ze=-68.805 Az status=0009 Ze status=0009 15:22:39 Check angles 15:22:39 SkyScan query 15:22:40 SkyScan query done: ret=0 az=81.795<-5453 ze=-89.775<-17985 Statuses=0009 0009 15:22:40 Msec=750 True Az=81.795 Ze=-89.775 Az status=0009 Ze status=0009 15:22:40 Check angles 15:22:40 SkyScan query 15:22:40 SkyScan query done: ret=0 az=99.375<-6625 ze=-110.73<-19382 Statuses=0009 0009 15:22:40 Msec=1500 True Az=99.375 Ze=-110.73 Az status=0009 Ze status=0009 15:22:41 Check angles 15:22:41 SkyScan query 15:22:41 SkyScan query done: ret=0 az=116.91<-7794 ze=-131.655<-20777 Statuses=0009 0009 15:22:41 Msec=2250 True Az=116.91 Ze=-131.655 Az status=0009 Ze status=0009 15:22:41 Check angles 15:22:41 SkyScan query 15:22:42 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 15:22:42 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 15:22:42 Check angles 15:22:42 SkyScan query 15:22:43 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:22:43 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:22:43 Message to Master queued w/err=0: serial=68984 error=0 15:22:48 Received message from Master: op=Filter serial=68985 15:22:48 Color wheel filter change from 0 to 0 15:22:48 FLIGetFilterPos err=0 currentPosition=0 15:22:48 FLIGetStepsRemaining err=0 RemainingSteps=0 15:22:48 Filter is already there-color wheel unchanged 15:22:48 Received message from Master: op=Shutter serial=68986 15:22:48 Shutter LASER close 15:22:48 Received message from Camera: op=State serial=68988 15:22:48 GetSingleValue result=40 Value=cccccccc 15:22:48 SkyScan query 15:22:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:22:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:49 Parameters OK 15:22:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:49 Set A/D data flow result=40 15:22:49 Set A/D channel type result=40 15:22:49 Set A/D encoding result=40 15:22:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:49 Set channel filter=0.000000e+000 result=40 15:22:49 Config A/D Result=40 15:22:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:49 Get A/D filter: -9.255963e+061 result=40 15:22:49 Get A/D value=-858993460 result=40 15:22:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:49 Parameters OK 15:22:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:49 Set A/D data flow result=40 15:22:49 Set A/D channel type result=40 15:22:49 Set A/D encoding result=40 15:22:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:49 Set channel filter=0.000000e+000 result=40 15:22:49 Config A/D Result=40 15:22:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:49 Get A/D filter: -9.255963e+061 result=40 15:22:49 Get A/D value=-858993460 result=40 15:22:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:49 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:22:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:22:49 Aux= 15:22:49 Message to Camera, serial 68988 queued 15:23:25 Received message from Master: op=PointingHead serial=69001 15:23:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:23:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:23:26 Point started: ret=0 15:23:26 point_skyscan result=0 15:23:26 Check angles 15:23:26 SkyScan query 15:23:27 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 15:23:27 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 15:23:27 Check angles 15:23:27 SkyScan query 15:23:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:23:28 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:23:28 Message to Master queued w/err=0: serial=69001 error=0 15:23:33 Received message from Master: op=Filter serial=69002 15:23:33 Color wheel filter change from 0 to 0 15:23:33 FLIGetFilterPos err=0 currentPosition=0 15:23:33 FLIGetStepsRemaining err=0 RemainingSteps=0 15:23:33 Filter is already there-color wheel unchanged 15:23:33 Received message from Master: op=Shutter serial=69003 15:23:33 Shutter LASER open 15:23:33 Received message from Camera: op=State serial=69005 15:23:33 GetSingleValue result=40 Value=cccccccc 15:23:33 SkyScan query 15:23:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:23:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:34 Parameters OK 15:23:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:34 Set A/D data flow result=40 15:23:34 Set A/D channel type result=40 15:23:34 Set A/D encoding result=40 15:23:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:34 Set channel filter=0.000000e+000 result=40 15:23:34 Config A/D Result=40 15:23:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:34 Get A/D filter: -9.255963e+061 result=40 15:23:34 Get A/D value=-858993460 result=40 15:23:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:34 Parameters OK 15:23:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:34 Set A/D data flow result=40 15:23:34 Set A/D channel type result=40 15:23:34 Set A/D encoding result=40 15:23:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:34 Set channel filter=0.000000e+000 result=40 15:23:34 Config A/D Result=40 15:23:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:34 Get A/D filter: -9.255963e+061 result=40 15:23:34 Get A/D value=-858993460 result=40 15:23:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:23:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:23:34 Aux= 15:23:34 Message to Camera, serial 69005 queued 15:23:42 Received message from Master: op=Shutter serial=69015 15:23:42 Shutter LASER close 15:23:43 Received message from Master: op=PointingHead serial=69019 15:23:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:23:43 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:23:43 Point started: ret=0 15:23:43 point_skyscan result=0 15:23:44 Check angles 15:23:44 SkyScan query 15:23:44 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.37<-21558 Statuses=0009 0009 15:23:44 Msec=0 True Az=135.75 Ze=-143.37 Az status=0009 Ze status=0009 15:23:45 Check angles 15:23:45 SkyScan query 15:23:45 SkyScan query done: ret=0 az=153.675<-10245 ze=-122.025<-20135 Statuses=0009 0009 15:23:45 Msec=750 True Az=153.675 Ze=-122.025 Az status=0009 Ze status=0009 15:23:45 Check angles 15:23:45 SkyScan query 15:23:46 SkyScan query done: ret=0 az=171.165<-11411 ze=-101.115<-18741 Statuses=0009 0009 15:23:46 Msec=1500 True Az=171.165 Ze=-101.115 Az status=0009 Ze status=0009 15:23:46 Check angles 15:23:46 SkyScan query 15:23:47 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.16<-17344 Statuses=0008 0009 15:23:47 Msec=2250 True Az=176.025 Ze=-80.16 Az status=0008 Ze status=0009 15:23:47 Check angles 15:23:47 SkyScan query 15:23:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.175<-15945 Statuses=0008 0009 15:23:47 Msec=3000 True Az=175.995 Ze=-59.175 Az status=0008 Ze status=0009 15:23:48 Check angles 15:23:48 SkyScan query 15:23:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:23:48 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:23:48 Message to Master queued w/err=0: serial=69019 error=0 15:23:53 Received message from Master: op=Filter serial=69020 15:23:53 Color wheel filter change from 0 to 0 15:23:53 FLIGetFilterPos err=0 currentPosition=0 15:23:53 FLIGetStepsRemaining err=0 RemainingSteps=0 15:23:53 Filter is already there-color wheel unchanged 15:23:53 Received message from Master: op=Shutter serial=69021 15:23:53 Shutter LASER close 15:23:53 Received message from Camera: op=State serial=69023 15:23:53 GetSingleValue result=40 Value=cccccccc 15:23:53 SkyScan query 15:23:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:23:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:54 Parameters OK 15:23:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:54 Set A/D data flow result=40 15:23:54 Set A/D channel type result=40 15:23:54 Set A/D encoding result=40 15:23:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:54 Set channel filter=0.000000e+000 result=40 15:23:54 Config A/D Result=40 15:23:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:54 Get A/D filter: -9.255963e+061 result=40 15:23:54 Get A/D value=-858993460 result=40 15:23:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:54 Parameters OK 15:23:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:54 Set A/D data flow result=40 15:23:54 Set A/D channel type result=40 15:23:54 Set A/D encoding result=40 15:23:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:54 Set channel filter=0.000000e+000 result=40 15:23:54 Config A/D Result=40 15:23:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:54 Get A/D filter: -9.255963e+061 result=40 15:23:54 Get A/D value=-858993460 result=40 15:23:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:23:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:23:54 Aux= 15:23:54 Message to Camera, serial 69023 queued 15:24:31 Received message from Master: op=PointingHead serial=69036 15:24:31 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:24:31 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:24:31 Point started: ret=0 15:24:31 point_skyscan result=0 15:24:32 Check angles 15:24:32 SkyScan query 15:24:33 SkyScan query done: ret=0 az=153<-10200 ze=-21.735<-13449 Statuses=0009 0009 15:24:33 Msec=0 True Az=153 Ze=-21.735 Az status=0009 Ze status=0009 15:24:33 Check angles 15:24:33 SkyScan query 15:24:33 SkyScan query done: ret=0 az=135.51<-9034 ze=-0.735<-12049 Statuses=0009 0009 15:24:33 Msec=750 True Az=135.51 Ze=-0.735 Az status=0009 Ze status=0009 15:24:33 Check angles 15:24:33 SkyScan query 15:24:34 SkyScan query done: ret=0 az=118.005<-7867 ze=20.205<-10653 Statuses=0009 0009 15:24:34 Msec=1500 True Az=118.005 Ze=20.205 Az status=0009 Ze status=0009 15:24:34 Check angles 15:24:34 SkyScan query 15:24:35 SkyScan query done: ret=0 az=100.47<-6698 ze=41.175<-9255 Statuses=0009 0009 15:24:35 Msec=2250 True Az=100.47 Ze=41.175 Az status=0009 Ze status=0009 15:24:35 Check angles 15:24:35 SkyScan query 15:24:36 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 15:24:36 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 15:24:36 Check angles 15:24:36 SkyScan query 15:24:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:24:36 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:24:36 Message to Master queued w/err=0: serial=69036 error=0 15:24:41 Received message from Master: op=Filter serial=69037 15:24:41 Color wheel filter change from 0 to 0 15:24:41 FLIGetFilterPos err=0 currentPosition=0 15:24:41 FLIGetStepsRemaining err=0 RemainingSteps=0 15:24:41 Filter is already there-color wheel unchanged 15:24:41 Received message from Master: op=Shutter serial=69038 15:24:41 Shutter LASER close 15:24:42 Received message from Camera: op=State serial=69040 15:24:42 GetSingleValue result=40 Value=cccccccc 15:24:42 SkyScan query 15:24:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:24:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:42 Parameters OK 15:24:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:42 Set A/D data flow result=40 15:24:42 Set A/D channel type result=40 15:24:42 Set A/D encoding result=40 15:24:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:42 Set channel filter=0.000000e+000 result=40 15:24:42 Config A/D Result=40 15:24:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:42 Get A/D filter: -9.255963e+061 result=40 15:24:42 Get A/D value=-858993460 result=40 15:24:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:42 Parameters OK 15:24:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:42 Set A/D data flow result=40 15:24:42 Set A/D channel type result=40 15:24:42 Set A/D encoding result=40 15:24:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:42 Set channel filter=0.000000e+000 result=40 15:24:42 Config A/D Result=40 15:24:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:42 Get A/D filter: -9.255963e+061 result=40 15:24:42 Get A/D value=-858993460 result=40 15:24:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:24:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:24:42 Aux= 15:24:42 Message to Camera, serial 69040 queued 15:25:18 Received message from Master: op=PointingHead serial=69052 15:25:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:25:18 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:25:18 Point started: ret=0 15:25:18 point_skyscan result=0 15:25:19 Check angles 15:25:19 SkyScan query 15:25:20 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 15:25:20 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 15:25:20 Check angles 15:25:20 SkyScan query 15:25:20 SkyScan query done: ret=0 az=126.375<-8425 ze=38.505<-9433 Statuses=0009 0008 15:25:20 Msec=750 True Az=126.375 Ze=38.505 Az status=0009 Ze status=0008 15:25:21 Check angles 15:25:21 SkyScan query 15:25:21 SkyScan query done: ret=0 az=143.865<-9591 ze=38.505<-9433 Statuses=0009 0008 15:25:21 Msec=1500 True Az=143.865 Ze=38.505 Az status=0009 Ze status=0008 15:25:21 Check angles 15:25:21 SkyScan query 15:25:22 SkyScan query done: ret=0 az=161.16<-10744 ze=38.505<-9433 Statuses=0009 0008 15:25:22 Msec=2250 True Az=161.16 Ze=38.505 Az status=0009 Ze status=0008 15:25:22 Check angles 15:25:22 SkyScan query 15:25:23 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 15:25:23 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 15:25:23 Check angles 15:25:23 SkyScan query 15:25:23 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:25:23 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:25:23 Message to Master queued w/err=0: serial=69052 error=0 15:25:28 Received message from Master: op=Filter serial=69053 15:25:28 Color wheel filter change from 0 to 0 15:25:28 FLIGetFilterPos err=0 currentPosition=0 15:25:28 FLIGetStepsRemaining err=0 RemainingSteps=0 15:25:28 Filter is already there-color wheel unchanged 15:25:29 Received message from Master: op=Shutter serial=69054 15:25:29 Shutter LASER close 15:25:29 Received message from Camera: op=State serial=69056 15:25:29 GetSingleValue result=40 Value=cccccccc 15:25:29 SkyScan query 15:25:29 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:25:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:29 Parameters OK 15:25:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:29 Set A/D data flow result=40 15:25:29 Set A/D channel type result=40 15:25:29 Set A/D encoding result=40 15:25:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:29 Set channel filter=0.000000e+000 result=40 15:25:29 Config A/D Result=40 15:25:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:29 Get A/D filter: -9.255963e+061 result=40 15:25:29 Get A/D value=-858993460 result=40 15:25:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:29 Parameters OK 15:25:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:29 Set A/D data flow result=40 15:25:29 Set A/D channel type result=40 15:25:29 Set A/D encoding result=40 15:25:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:29 Set channel filter=0.000000e+000 result=40 15:25:29 Config A/D Result=40 15:25:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:29 Get A/D filter: -9.255963e+061 result=40 15:25:29 Get A/D value=-858993460 result=40 15:25:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:25:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:25:29 Aux= 15:25:29 Message to Camera, serial 69056 queued 15:26:06 Received message from Master: op=PointingHead serial=69069 15:26:06 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:26:06 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:26:06 Point started: ret=0 15:26:06 point_skyscan result=0 15:26:07 Check angles 15:26:07 SkyScan query 15:26:08 SkyScan query done: ret=0 az=153.12<-10208 ze=8.775<-11415 Statuses=0009 0009 15:26:08 Msec=0 True Az=153.12 Ze=8.775 Az status=0009 Ze status=0009 15:26:08 Check angles 15:26:08 SkyScan query 15:26:08 SkyScan query done: ret=0 az=135.675<-9045 ze=-12.18<-12812 Statuses=0009 0009 15:26:08 Msec=750 True Az=135.675 Ze=-12.18 Az status=0009 Ze status=0009 15:26:09 Check angles 15:26:09 SkyScan query 15:26:09 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.495<-14233 Statuses=0009 0009 15:26:09 Msec=1500 True Az=117.765 Ze=-33.495 Az status=0009 Ze status=0009 15:26:09 Check angles 15:26:09 SkyScan query [UTC 2018-12-11 15:26:10] 15:26:10 SkyScan query done: ret=0 az=100.335<-6689 ze=-51.555<-15437 Statuses=0009 0009 15:26:10 Msec=2250 True Az=100.335 Ze=-51.555 Az status=0009 Ze status=0009 15:26:10 Check angles 15:26:10 SkyScan query 15:26:11 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 15:26:11 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 15:26:11 Check angles 15:26:11 SkyScan query 15:26:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:26:12 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:26:12 Message to Master queued w/err=0: serial=69069 error=0 15:26:17 Received message from Master: op=Filter serial=69070 15:26:17 Color wheel filter change from 0 to 0 15:26:17 FLIGetFilterPos err=0 currentPosition=0 15:26:17 FLIGetStepsRemaining err=0 RemainingSteps=0 15:26:17 Filter is already there-color wheel unchanged 15:26:17 Received message from Master: op=Shutter serial=69071 15:26:17 Shutter LASER close 15:26:17 Received message from Camera: op=State serial=69073 15:26:17 GetSingleValue result=40 Value=cccccccc 15:26:17 SkyScan query 15:26:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:26:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:26:17 Parameters OK 15:26:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:26:17 Set A/D data flow result=40 15:26:17 Set A/D channel type result=40 15:26:17 Set A/D encoding result=40 15:26:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:26:17 Set channel filter=0.000000e+000 result=40 15:26:17 Config A/D Result=40 15:26:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:26:17 Get A/D filter: -9.255963e+061 result=40 15:26:17 Get A/D value=-858993460 result=40 15:26:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:26:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:26:17 Parameters OK 15:26:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:26:17 Set A/D data flow result=40 15:26:17 Set A/D channel type result=40 15:26:17 Set A/D encoding result=40 15:26:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:26:17 Set channel filter=0.000000e+000 result=40 15:26:17 Config A/D Result=40 15:26:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:26:17 Get A/D filter: -9.255963e+061 result=40 15:26:17 Get A/D value=-858993460 result=40 15:26:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:26:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:26:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:26:17 Aux= 15:26:17 Message to Camera, serial 69073 queued 15:26:54 Received message from Master: op=PointingHead serial=69086 15:26:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:26:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:26:54 Point started: ret=0 15:26:54 point_skyscan result=0 15:26:55 Check angles 15:26:55 SkyScan query 15:26:56 SkyScan query done: ret=0 az=109.065<-7271 ze=-81.315<-17421 Statuses=0009 0009 15:26:56 Msec=0 True Az=109.065 Ze=-81.315 Az status=0009 Ze status=0009 15:26:56 Check angles 15:26:56 SkyScan query 15:26:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.27<-18818 Statuses=0008 0009 15:26:57 Msec=750 True Az=112.995 Ze=-102.27 Az status=0008 Ze status=0009 15:26:57 Check angles 15:26:57 SkyScan query 15:26:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.675<-20245 Statuses=0008 0009 15:26:57 Msec=1500 True Az=112.995 Ze=-123.675 Az status=0008 Ze status=0009 15:26:58 Check angles 15:26:58 SkyScan query 15:26:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.05<-21670 Statuses=0008 0009 15:26:58 Msec=2250 True Az=112.995 Ze=-145.05 Az status=0008 Ze status=0009 15:26:58 Check angles 15:26:58 SkyScan query 15:26:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.99<-23066 Statuses=0008 0009 15:26:59 Msec=3000 True Az=112.995 Ze=-165.99 Az status=0008 Ze status=0009 15:26:59 Check angles 15:26:59 SkyScan query 15:27:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:27:00 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:27:00 Message to Master queued w/err=0: serial=69086 error=0 15:27:05 Received message from Master: op=Filter serial=69087 15:27:05 Color wheel filter change from 0 to 0 15:27:05 FLIGetFilterPos err=0 currentPosition=0 15:27:05 FLIGetStepsRemaining err=0 RemainingSteps=0 15:27:05 Filter is already there-color wheel unchanged 15:27:05 Received message from Master: op=Shutter serial=69088 15:27:05 Shutter LASER open 15:27:05 Received message from Camera: op=State serial=69090 15:27:05 GetSingleValue result=40 Value=cccccccc 15:27:05 SkyScan query 15:27:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:27:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:06 Parameters OK 15:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:06 Set A/D data flow result=40 15:27:06 Set A/D channel type result=40 15:27:06 Set A/D encoding result=40 15:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:06 Set channel filter=0.000000e+000 result=40 15:27:06 Config A/D Result=40 15:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:06 Get A/D filter: -9.255963e+061 result=40 15:27:06 Get A/D value=-858993460 result=40 15:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:06 Parameters OK 15:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:06 Set A/D data flow result=40 15:27:06 Set A/D channel type result=40 15:27:06 Set A/D encoding result=40 15:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:06 Set channel filter=0.000000e+000 result=40 15:27:06 Config A/D Result=40 15:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:06 Get A/D filter: -9.255963e+061 result=40 15:27:06 Get A/D value=-858993460 result=40 15:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:27:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:27:06 Aux= 15:27:06 Message to Camera, serial 69090 queued 15:27:14 Received message from Master: op=Shutter serial=69100 15:27:14 Shutter LASER close 15:27:14 Received message from Master: op=PointingHead serial=69104 15:27:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:27:14 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:27:15 Point started: ret=0 15:27:15 point_skyscan result=0 15:27:16 Check angles 15:27:16 SkyScan query 15:27:16 SkyScan query done: ret=0 az=89.88<-5992 ze=157.245<-1517 Statuses=0009 0009 15:27:16 Msec=0 True Az=89.88 Ze=157.245 Az status=0009 Ze status=0009 15:27:16 Check angles 15:27:16 SkyScan query 15:27:17 SkyScan query done: ret=0 az=72.45<-4830 ze=136.26<-2916 Statuses=0009 0009 15:27:17 Msec=750 True Az=72.45 Ze=136.26 Az status=0009 Ze status=0009 15:27:17 Check angles 15:27:17 SkyScan query 15:27:18 SkyScan query done: ret=0 az=55.05<-3670 ze=115.35<-4310 Statuses=0009 0009 15:27:18 Msec=1500 True Az=55.05 Ze=115.35 Az status=0009 Ze status=0009 15:27:18 Check angles 15:27:18 SkyScan query 15:27:18 SkyScan query done: ret=0 az=40.875<-2725 ze=94.35<-5710 Statuses=0009 0009 15:27:18 Msec=2250 True Az=40.875 Ze=94.35 Az status=0009 Ze status=0009 15:27:19 Check angles 15:27:19 SkyScan query 15:27:19 SkyScan query done: ret=0 az=40.995<-2733 ze=73.425<-7105 Statuses=0008 0009 15:27:19 Msec=3000 True Az=40.995 Ze=73.425 Az status=0008 Ze status=0009 15:27:19 Check angles 15:27:19 SkyScan query 15:27:20 SkyScan query done: ret=0 az=40.995<-2733 ze=52.83<-8478 Statuses=0008 0009 15:27:20 Msec=3750 True Az=40.995 Ze=52.83 Az status=0008 Ze status=0009 15:27:20 Check angles 15:27:20 SkyScan query 15:27:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:27:21 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:27:21 Message to Master queued w/err=0: serial=69104 error=0 15:27:26 Received message from Master: op=Filter serial=69105 15:27:26 Color wheel filter change from 0 to 0 15:27:26 FLIGetFilterPos err=0 currentPosition=0 15:27:26 FLIGetStepsRemaining err=0 RemainingSteps=0 15:27:26 Filter is already there-color wheel unchanged 15:27:26 Received message from Master: op=Shutter serial=69106 15:27:26 Shutter LASER close 15:27:26 Received message from Camera: op=State serial=69108 15:27:26 GetSingleValue result=40 Value=cccccccc 15:27:26 SkyScan query 15:27:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:27:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:27 Parameters OK 15:27:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:27 Set A/D data flow result=40 15:27:27 Set A/D channel type result=40 15:27:27 Set A/D encoding result=40 15:27:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:27 Set channel filter=0.000000e+000 result=40 15:27:27 Config A/D Result=40 15:27:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:27 Get A/D filter: -9.255963e+061 result=40 15:27:27 Get A/D value=-858993460 result=40 15:27:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:27 Parameters OK 15:27:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:27 Set A/D data flow result=40 15:27:27 Set A/D channel type result=40 15:27:27 Set A/D encoding result=40 15:27:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:27 Set channel filter=0.000000e+000 result=40 15:27:27 Config A/D Result=40 15:27:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:27 Get A/D filter: -9.255963e+061 result=40 15:27:27 Get A/D value=-858993460 result=40 15:27:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:27:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:27:27 Aux= 15:27:27 Message to Camera, serial 69108 queued 15:28:03 Received message from Master: op=PointingHead serial=69121 15:28:03 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:28:03 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:28:04 Point started: ret=0 15:28:04 point_skyscan result=0 15:28:04 Check angles 15:28:04 SkyScan query 15:28:05 SkyScan query done: ret=0 az=63.75<-4250 ze=66.555<-7563 Statuses=0009 0008 15:28:05 Msec=0 True Az=63.75 Ze=66.555 Az status=0009 Ze status=0008 15:28:05 Check angles 15:28:05 SkyScan query 15:28:06 SkyScan query done: ret=0 az=81.15<-5410 ze=66.495<-7567 Statuses=0009 0008 15:28:06 Msec=750 True Az=81.15 Ze=66.495 Az status=0009 Ze status=0008 15:28:06 Check angles 15:28:06 SkyScan query 15:28:07 SkyScan query done: ret=0 az=98.67<-6578 ze=66.495<-7567 Statuses=0009 0008 15:28:07 Msec=1500 True Az=98.67 Ze=66.495 Az status=0009 Ze status=0008 15:28:07 Check angles 15:28:07 SkyScan query 15:28:07 SkyScan query done: ret=0 az=116.25<-7750 ze=66.495<-7567 Statuses=0009 0008 15:28:07 Msec=2250 True Az=116.25 Ze=66.495 Az status=0009 Ze status=0008 15:28:07 Check angles 15:28:07 SkyScan query 15:28:08 SkyScan query done: ret=0 az=134.22<-8948 ze=66.495<-7567 Statuses=0009 0008 15:28:08 Msec=3000 True Az=134.22 Ze=66.495 Az status=0009 Ze status=0008 15:28:08 Check angles 15:28:08 SkyScan query 15:28:09 SkyScan query done: ret=0 az=151.575<-10105 ze=66.495<-7567 Statuses=0009 0008 15:28:09 Msec=3750 True Az=151.575 Ze=66.495 Az status=0009 Ze status=0008 15:28:09 Check angles 15:28:09 SkyScan query 15:28:10 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:28:10 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 15:28:10 Message to Master queued w/err=0: serial=69121 error=0 15:28:15 Received message from Master: op=Filter serial=69122 15:28:15 Color wheel filter change from 0 to 0 15:28:15 FLIGetFilterPos err=0 currentPosition=0 15:28:15 FLIGetStepsRemaining err=0 RemainingSteps=0 15:28:15 Filter is already there-color wheel unchanged 15:28:15 Received message from Master: op=Shutter serial=69123 15:28:15 Shutter LASER close 15:28:15 Received message from Camera: op=State serial=69125 15:28:15 GetSingleValue result=40 Value=cccccccc 15:28:15 SkyScan query 15:28:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:28:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:28:15 Parameters OK 15:28:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:28:15 Set A/D data flow result=40 15:28:15 Set A/D channel type result=40 15:28:15 Set A/D encoding result=40 15:28:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:28:15 Set channel filter=0.000000e+000 result=40 15:28:15 Config A/D Result=40 15:28:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:28:15 Get A/D filter: -9.255963e+061 result=40 15:28:15 Get A/D value=-858993460 result=40 15:28:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:28:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:28:15 Parameters OK 15:28:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:28:15 Set A/D data flow result=40 15:28:15 Set A/D channel type result=40 15:28:15 Set A/D encoding result=40 15:28:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:28:15 Set channel filter=0.000000e+000 result=40 15:28:15 Config A/D Result=40 15:28:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:28:15 Get A/D filter: -9.255963e+061 result=40 15:28:15 Get A/D value=-858993460 result=40 15:28:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:28:15 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:28:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:28:15 Aux= 15:28:15 Message to Camera, serial 69125 queued 15:28:52 Received message from Master: op=PointingHead serial=69138 15:28:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:28:52 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:28:52 Point started: ret=0 15:28:52 point_skyscan result=0 15:28:53 Check angles 15:28:53 SkyScan query 15:28:54 SkyScan query done: ret=0 az=134.82<-8988 ze=36.63<-9558 Statuses=0009 0009 15:28:54 Msec=0 True Az=134.82 Ze=36.63 Az status=0009 Ze status=0009 15:28:54 Check angles 15:28:54 SkyScan query 15:28:55 SkyScan query done: ret=0 az=117.06<-7804 ze=15.3<-10980 Statuses=0009 0009 15:28:55 Msec=750 True Az=117.06 Ze=15.3 Az status=0009 Ze status=0009 15:28:55 Check angles 15:28:55 SkyScan query 15:28:55 SkyScan query done: ret=0 az=99.69<-6646 ze=-5.715<-12381 Statuses=0009 0009 15:28:55 Msec=1500 True Az=99.69 Ze=-5.715 Az status=0009 Ze status=0009 15:28:56 Check angles 15:28:56 SkyScan query 15:28:56 SkyScan query done: ret=0 az=82.215<-5481 ze=-26.655<-13777 Statuses=0009 0009 15:28:56 Msec=2250 True Az=82.215 Ze=-26.655 Az status=0009 Ze status=0009 15:28:56 Check angles 15:28:56 SkyScan query 15:28:57 SkyScan query done: ret=0 az=64.65<-4310 ze=-38.565<-14571 Statuses=0009 0008 15:28:57 Msec=3000 True Az=64.65 Ze=-38.565 Az status=0009 Ze status=0008 15:28:57 Check angles 15:28:57 SkyScan query 15:28:58 SkyScan query done: ret=0 az=47.19<-3146 ze=-38.535<-14569 Statuses=0009 0008 15:28:58 Msec=3750 True Az=47.19 Ze=-38.535 Az status=0009 Ze status=0008 15:28:58 Check angles 15:28:58 SkyScan query 15:28:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:28:58 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:28:58 Message to Master queued w/err=0: serial=69138 error=0 15:29:03 Received message from Master: op=Filter serial=69139 15:29:03 Color wheel filter change from 0 to 0 15:29:03 FLIGetFilterPos err=0 currentPosition=0 15:29:03 FLIGetStepsRemaining err=0 RemainingSteps=0 15:29:03 Filter is already there-color wheel unchanged 15:29:04 Received message from Master: op=Shutter serial=69140 15:29:04 Shutter LASER close 15:29:04 Received message from Camera: op=State serial=69142 15:29:04 GetSingleValue result=40 Value=cccccccc 15:29:04 SkyScan query 15:29:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:29:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:04 Parameters OK 15:29:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:04 Set A/D data flow result=40 15:29:04 Set A/D channel type result=40 15:29:04 Set A/D encoding result=40 15:29:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:04 Set channel filter=0.000000e+000 result=40 15:29:04 Config A/D Result=40 15:29:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:04 Get A/D filter: -9.255963e+061 result=40 15:29:04 Get A/D value=-858993460 result=40 15:29:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:04 Parameters OK 15:29:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:04 Set A/D data flow result=40 15:29:04 Set A/D channel type result=40 15:29:04 Set A/D encoding result=40 15:29:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:04 Set channel filter=0.000000e+000 result=40 15:29:04 Config A/D Result=40 15:29:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:04 Get A/D filter: -9.255963e+061 result=40 15:29:04 Get A/D value=-858993460 result=40 15:29:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:29:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:29:04 Aux= 15:29:04 Message to Camera, serial 69142 queued 15:29:41 Received message from Master: op=PointingHead serial=69155 15:29:41 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:29:41 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:29:41 Point started: ret=0 15:29:41 point_skyscan result=0 15:29:42 Check angles 15:29:42 SkyScan query 15:29:43 SkyScan query done: ret=0 az=64.065<-4271 ze=-68.04<-16536 Statuses=0009 0009 15:29:43 Msec=0 True Az=64.065 Ze=-68.04 Az status=0009 Ze status=0009 15:29:43 Check angles 15:29:43 SkyScan query 15:29:43 SkyScan query done: ret=0 az=81.285<-5419 ze=-89.055<-17937 Statuses=0009 0009 15:29:43 Msec=750 True Az=81.285 Ze=-89.055 Az status=0009 Ze status=0009 15:29:44 Check angles 15:29:44 SkyScan query 15:29:44 SkyScan query done: ret=0 az=99.39<-6626 ze=-110.46<-19364 Statuses=0009 0009 15:29:44 Msec=1500 True Az=99.39 Ze=-110.46 Az status=0009 Ze status=0009 15:29:44 Check angles 15:29:44 SkyScan query 15:29:45 SkyScan query done: ret=0 az=116.91<-7794 ze=-131.385<-20759 Statuses=0009 0009 15:29:45 Msec=2250 True Az=116.91 Ze=-131.385 Az status=0009 Ze status=0009 15:29:45 Check angles 15:29:45 SkyScan query 15:29:46 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 15:29:46 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 15:29:46 Check angles 15:29:46 SkyScan query 15:29:46 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:29:46 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:29:46 Message to Master queued w/err=0: serial=69155 error=0 15:29:51 Received message from Master: op=Filter serial=69156 15:29:51 Color wheel filter change from 0 to 0 15:29:51 FLIGetFilterPos err=0 currentPosition=0 15:29:51 FLIGetStepsRemaining err=0 RemainingSteps=0 15:29:51 Filter is already there-color wheel unchanged 15:29:52 Received message from Master: op=Shutter serial=69157 15:29:52 Shutter LASER close 15:29:52 Received message from Camera: op=State serial=69159 15:29:52 GetSingleValue result=40 Value=cccccccc 15:29:52 SkyScan query 15:29:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:29:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:52 Parameters OK 15:29:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:52 Set A/D data flow result=40 15:29:52 Set A/D channel type result=40 15:29:52 Set A/D encoding result=40 15:29:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:52 Set channel filter=0.000000e+000 result=40 15:29:52 Config A/D Result=40 15:29:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:52 Get A/D filter: -9.255963e+061 result=40 15:29:52 Get A/D value=-858993460 result=40 15:29:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:52 Parameters OK 15:29:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:52 Set A/D data flow result=40 15:29:52 Set A/D channel type result=40 15:29:52 Set A/D encoding result=40 15:29:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:52 Set channel filter=0.000000e+000 result=40 15:29:52 Config A/D Result=40 15:29:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:52 Get A/D filter: -9.255963e+061 result=40 15:29:52 Get A/D value=-858993460 result=40 15:29:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:52 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:29:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:29:52 Aux= 15:29:52 Message to Camera, serial 69159 queued 15:30:28 Received message from Master: op=PointingHead serial=69171 15:30:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:30:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:30:28 Point started: ret=0 15:30:28 point_skyscan result=0 15:30:29 Check angles 15:30:29 SkyScan query 15:30:30 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.925<-23395 Statuses=0009 0009 15:30:30 Msec=0 True Az=113.01 Ze=-170.925 Az status=0009 Ze status=0009 15:30:30 Check angles 15:30:30 SkyScan query 15:30:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:30:31 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:30:31 Message to Master queued w/err=0: serial=69171 error=0 15:30:36 Received message from Master: op=Filter serial=69172 15:30:36 Color wheel filter change from 0 to 0 15:30:36 FLIGetFilterPos err=0 currentPosition=0 15:30:36 FLIGetStepsRemaining err=0 RemainingSteps=0 15:30:36 Filter is already there-color wheel unchanged 15:30:36 Received message from Master: op=Shutter serial=69173 15:30:36 Shutter LASER open 15:30:36 Received message from Camera: op=State serial=69175 15:30:36 GetSingleValue result=40 Value=cccccccc 15:30:36 SkyScan query 15:30:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:30:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:37 Parameters OK 15:30:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:37 Set A/D data flow result=40 15:30:37 Set A/D channel type result=40 15:30:37 Set A/D encoding result=40 15:30:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:37 Set channel filter=0.000000e+000 result=40 15:30:37 Config A/D Result=40 15:30:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:37 Get A/D filter: -9.255963e+061 result=40 15:30:37 Get A/D value=-858993460 result=40 15:30:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:37 Parameters OK 15:30:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:37 Set A/D data flow result=40 15:30:37 Set A/D channel type result=40 15:30:37 Set A/D encoding result=40 15:30:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:37 Set channel filter=0.000000e+000 result=40 15:30:37 Config A/D Result=40 15:30:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:37 Get A/D filter: -9.255963e+061 result=40 15:30:37 Get A/D value=-858993460 result=40 15:30:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:30:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:30:37 Aux= 15:30:37 Message to Camera, serial 69175 queued 15:30:45 Received message from Master: op=Shutter serial=69185 15:30:45 Shutter LASER close 15:30:46 Received message from Master: op=PointingHead serial=69189 15:30:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:30:46 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:30:46 Point started: ret=0 15:30:46 point_skyscan result=0 15:30:47 Check angles 15:30:47 SkyScan query 15:30:47 SkyScan query done: ret=0 az=136.14<-9076 ze=-142.965<-21531 Statuses=0009 0009 15:30:47 Msec=0 True Az=136.14 Ze=-142.965 Az status=0009 Ze status=0009 15:30:47 Check angles 15:30:47 SkyScan query 15:30:48 SkyScan query done: ret=0 az=153.585<-10239 ze=-121.995<-20133 Statuses=0009 0009 15:30:48 Msec=750 True Az=153.585 Ze=-121.995 Az status=0009 Ze status=0009 15:30:48 Check angles 15:30:48 SkyScan query 15:30:49 SkyScan query done: ret=0 az=171.18<-11412 ze=-101.07<-18738 Statuses=0009 0009 15:30:49 Msec=1500 True Az=171.18 Ze=-101.07 Az status=0009 Ze status=0009 15:30:49 Check angles 15:30:49 SkyScan query 15:30:49 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.16<-17344 Statuses=0008 0009 15:30:49 Msec=2250 True Az=176.025 Ze=-80.16 Az status=0008 Ze status=0009 15:30:50 Check angles 15:30:50 SkyScan query 15:30:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.16<-15944 Statuses=0008 0009 15:30:50 Msec=3000 True Az=175.995 Ze=-59.16 Az status=0008 Ze status=0009 15:30:50 Check angles 15:30:50 SkyScan query 15:30:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:30:51 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:30:51 Message to Master queued w/err=0: serial=69189 error=0 15:30:56 Received message from Master: op=Filter serial=69190 15:30:56 Color wheel filter change from 0 to 0 15:30:56 FLIGetFilterPos err=0 currentPosition=0 15:30:56 FLIGetStepsRemaining err=0 RemainingSteps=0 15:30:56 Filter is already there-color wheel unchanged 15:30:56 Received message from Master: op=Shutter serial=69191 15:30:56 Shutter LASER close 15:30:56 Received message from Camera: op=State serial=69193 15:30:56 GetSingleValue result=40 Value=cccccccc 15:30:56 SkyScan query 15:30:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:30:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:57 Parameters OK 15:30:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:57 Set A/D data flow result=40 15:30:57 Set A/D channel type result=40 15:30:57 Set A/D encoding result=40 15:30:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:57 Set channel filter=0.000000e+000 result=40 15:30:57 Config A/D Result=40 15:30:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:57 Get A/D filter: -9.255963e+061 result=40 15:30:57 Get A/D value=-858993460 result=40 15:30:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:57 Parameters OK 15:30:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:57 Set A/D data flow result=40 15:30:57 Set A/D channel type result=40 15:30:57 Set A/D encoding result=40 15:30:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:57 Set channel filter=0.000000e+000 result=40 15:30:57 Config A/D Result=40 15:30:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:57 Get A/D filter: -9.255963e+061 result=40 15:30:57 Get A/D value=-858993460 result=40 15:30:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:30:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:30:57 Aux= 15:30:57 Message to Camera, serial 69193 queued 15:31:34 Received message from Master: op=PointingHead serial=69206 15:31:34 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:31:34 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:31:34 Point started: ret=0 15:31:34 point_skyscan result=0 15:31:35 Check angles 15:31:35 SkyScan query 15:31:35 SkyScan query done: ret=0 az=153.135<-10209 ze=-21.915<-13461 Statuses=0009 0009 15:31:35 Msec=0 True Az=153.135 Ze=-21.915 Az status=0009 Ze status=0009 15:31:36 Check angles 15:31:36 SkyScan query 15:31:36 SkyScan query done: ret=0 az=135.78<-9052 ze=-0.93<-12062 Statuses=0009 0009 15:31:36 Msec=750 True Az=135.78 Ze=-0.93 Az status=0009 Ze status=0009 15:31:36 Check angles 15:31:36 SkyScan query 15:31:37 SkyScan query done: ret=0 az=118.14<-7876 ze=20.01<-10666 Statuses=0009 0009 15:31:37 Msec=1500 True Az=118.14 Ze=20.01 Az status=0009 Ze status=0009 15:31:37 Check angles 15:31:37 SkyScan query 15:31:38 SkyScan query done: ret=0 az=100.59<-6706 ze=40.965<-9269 Statuses=0009 0009 15:31:38 Msec=2250 True Az=100.59 Ze=40.965 Az status=0009 Ze status=0009 15:31:38 Check angles 15:31:38 SkyScan query 15:31:38 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 15:31:38 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 15:31:39 Check angles 15:31:39 SkyScan query 15:31:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:31:39 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:31:39 Message to Master queued w/err=0: serial=69206 error=0 15:31:44 Received message from Master: op=Filter serial=69207 15:31:44 Color wheel filter change from 0 to 0 15:31:44 FLIGetFilterPos err=0 currentPosition=0 15:31:44 FLIGetStepsRemaining err=0 RemainingSteps=0 15:31:44 Filter is already there-color wheel unchanged 15:31:44 Received message from Master: op=Shutter serial=69208 15:31:44 Shutter LASER close 15:31:44 Received message from Camera: op=State serial=69210 15:31:44 GetSingleValue result=40 Value=cccccccc 15:31:44 SkyScan query 15:31:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:31:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:31:45 Parameters OK 15:31:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:31:45 Set A/D data flow result=40 15:31:45 Set A/D channel type result=40 15:31:45 Set A/D encoding result=40 15:31:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:31:45 Set channel filter=0.000000e+000 result=40 15:31:45 Config A/D Result=40 15:31:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:31:45 Get A/D filter: -9.255963e+061 result=40 15:31:45 Get A/D value=-858993460 result=40 15:31:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:31:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:31:45 Parameters OK 15:31:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:31:45 Set A/D data flow result=40 15:31:45 Set A/D channel type result=40 15:31:45 Set A/D encoding result=40 15:31:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:31:45 Set channel filter=0.000000e+000 result=40 15:31:45 Config A/D Result=40 15:31:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:31:45 Get A/D filter: -9.255963e+061 result=40 15:31:45 Get A/D value=-858993460 result=40 15:31:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:31:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:31:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:31:45 Aux= 15:31:45 Message to Camera, serial 69210 queued 15:32:21 Received message from Master: op=PointingHead serial=69222 15:32:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:32:21 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:32:21 Point started: ret=0 15:32:21 point_skyscan result=0 15:32:22 Check angles 15:32:22 SkyScan query 15:32:23 SkyScan query done: ret=0 az=109.02<-7268 ze=38.49<-9434 Statuses=0009 0008 15:32:23 Msec=0 True Az=109.02 Ze=38.49 Az status=0009 Ze status=0008 15:32:23 Check angles 15:32:23 SkyScan query 15:32:23 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 15:32:23 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 15:32:23 Check angles 15:32:23 SkyScan query 15:32:24 SkyScan query done: ret=0 az=144.375<-9625 ze=38.505<-9433 Statuses=0009 0008 15:32:24 Msec=1500 True Az=144.375 Ze=38.505 Az status=0009 Ze status=0008 15:32:24 Check angles 15:32:24 SkyScan query 15:32:25 SkyScan query done: ret=0 az=161.79<-10786 ze=38.505<-9433 Statuses=0009 0008 15:32:25 Msec=2250 True Az=161.79 Ze=38.505 Az status=0009 Ze status=0008 15:32:25 Check angles 15:32:25 SkyScan query 15:32:26 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:32:26 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:32:26 Check angles 15:32:26 SkyScan query 15:32:26 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:32:26 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:32:26 Message to Master queued w/err=0: serial=69222 error=0 15:32:31 Received message from Master: op=Filter serial=69223 15:32:31 Color wheel filter change from 0 to 0 15:32:31 FLIGetFilterPos err=0 currentPosition=0 15:32:31 FLIGetStepsRemaining err=0 RemainingSteps=0 15:32:31 Filter is already there-color wheel unchanged 15:32:31 Received message from Master: op=Shutter serial=69224 15:32:31 Shutter LASER close 15:32:32 Received message from Camera: op=State serial=69226 15:32:32 GetSingleValue result=40 Value=cccccccc 15:32:32 SkyScan query 15:32:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:32:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:32 Parameters OK 15:32:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:32 Set A/D data flow result=40 15:32:32 Set A/D channel type result=40 15:32:32 Set A/D encoding result=40 15:32:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:32 Set channel filter=0.000000e+000 result=40 15:32:32 Config A/D Result=40 15:32:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:32 Get A/D filter: -9.255963e+061 result=40 15:32:32 Get A/D value=-858993460 result=40 15:32:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:32 Parameters OK 15:32:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:32 Set A/D data flow result=40 15:32:32 Set A/D channel type result=40 15:32:32 Set A/D encoding result=40 15:32:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:32 Set channel filter=0.000000e+000 result=40 15:32:32 Config A/D Result=40 15:32:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:32 Get A/D filter: -9.255963e+061 result=40 15:32:32 Get A/D value=-858993460 result=40 15:32:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:32:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:32:32 Aux= 15:32:32 Message to Camera, serial 69226 queued 15:33:09 Received message from Master: op=PointingHead serial=69239 15:33:09 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:33:09 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:33:09 Point started: ret=0 15:33:09 point_skyscan result=0 15:33:10 Check angles 15:33:10 SkyScan query 15:33:11 SkyScan query done: ret=0 az=152.94<-10196 ze=8.535<-11431 Statuses=0009 0009 15:33:11 Msec=0 True Az=152.94 Ze=8.535 Az status=0009 Ze status=0009 15:33:11 Check angles 15:33:11 SkyScan query 15:33:11 SkyScan query done: ret=0 az=135.495<-9033 ze=-12.405<-12827 Statuses=0009 0009 15:33:11 Msec=750 True Az=135.495 Ze=-12.405 Az status=0009 Ze status=0009 15:33:12 Check angles 15:33:12 SkyScan query 15:33:12 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.345<-14223 Statuses=0009 0009 15:33:12 Msec=1500 True Az=117.795 Ze=-33.345 Az status=0009 Ze status=0009 15:33:12 Check angles 15:33:12 SkyScan query 15:33:13 SkyScan query done: ret=0 az=100.365<-6691 ze=-51.54<-15436 Statuses=0009 0009 15:33:13 Msec=2250 True Az=100.365 Ze=-51.54 Az status=0009 Ze status=0009 15:33:13 Check angles 15:33:13 SkyScan query 15:33:14 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 15:33:14 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 15:33:14 Check angles 15:33:14 SkyScan query 15:33:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:33:14 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:33:14 Message to Master queued w/err=0: serial=69239 error=0 15:33:19 Received message from Master: op=Filter serial=69240 15:33:19 Color wheel filter change from 0 to 0 15:33:19 FLIGetFilterPos err=0 currentPosition=0 15:33:19 FLIGetStepsRemaining err=0 RemainingSteps=0 15:33:19 Filter is already there-color wheel unchanged 15:33:20 Received message from Master: op=Shutter serial=69241 15:33:20 Shutter LASER close 15:33:20 Received message from Camera: op=State serial=69243 15:33:20 GetSingleValue result=40 Value=cccccccc 15:33:20 SkyScan query 15:33:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:33:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:33:20 Parameters OK 15:33:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:33:20 Set A/D data flow result=40 15:33:20 Set A/D channel type result=40 15:33:20 Set A/D encoding result=40 15:33:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:33:20 Set channel filter=0.000000e+000 result=40 15:33:20 Config A/D Result=40 15:33:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:33:20 Get A/D filter: -9.255963e+061 result=40 15:33:20 Get A/D value=-858993460 result=40 15:33:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:33:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:33:20 Parameters OK 15:33:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:33:20 Set A/D data flow result=40 15:33:20 Set A/D channel type result=40 15:33:20 Set A/D encoding result=40 15:33:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:33:20 Set channel filter=0.000000e+000 result=40 15:33:20 Config A/D Result=40 15:33:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:33:20 Get A/D filter: -9.255963e+061 result=40 15:33:20 Get A/D value=-858993460 result=40 15:33:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:33:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:33:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:33:20 Aux= 15:33:20 Message to Camera, serial 69243 queued 15:33:57 Received message from Master: op=PointingHead serial=69256 15:33:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:33:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:33:57 Point started: ret=0 15:33:57 point_skyscan result=0 15:33:58 Check angles 15:33:58 SkyScan query 15:33:59 SkyScan query done: ret=0 az=109.575<-7305 ze=-81.795<-17453 Statuses=0009 0009 15:33:59 Msec=0 True Az=109.575 Ze=-81.795 Az status=0009 Ze status=0009 15:33:59 Check angles 15:33:59 SkyScan query 15:33:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.75<-18850 Statuses=0008 0009 15:33:59 Msec=750 True Az=112.995 Ze=-102.75 Az status=0008 Ze status=0009 15:34:00 Check angles 15:34:00 SkyScan query 15:34:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.69<-20246 Statuses=0008 0009 15:34:00 Msec=1500 True Az=112.995 Ze=-123.69 Az status=0008 Ze status=0009 15:34:00 Check angles 15:34:00 SkyScan query 15:34:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.66<-21644 Statuses=0008 0009 15:34:01 Msec=2250 True Az=112.995 Ze=-144.66 Az status=0008 Ze status=0009 15:34:01 Check angles 15:34:01 SkyScan query 15:34:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.585<-23039 Statuses=0008 0009 15:34:02 Msec=3000 True Az=112.995 Ze=-165.585 Az status=0008 Ze status=0009 15:34:02 Check angles 15:34:02 SkyScan query 15:34:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:34:02 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:34:02 Message to Master queued w/err=0: serial=69256 error=0 15:34:07 Received message from Master: op=Filter serial=69257 15:34:07 Color wheel filter change from 0 to 0 15:34:07 FLIGetFilterPos err=0 currentPosition=0 15:34:07 FLIGetStepsRemaining err=0 RemainingSteps=0 15:34:07 Filter is already there-color wheel unchanged 15:34:08 Received message from Master: op=Shutter serial=69258 15:34:08 Shutter LASER open 15:34:08 Received message from Camera: op=State serial=69260 15:34:08 GetSingleValue result=40 Value=cccccccc 15:34:08 SkyScan query 15:34:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:34:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:34:08 Parameters OK 15:34:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:34:08 Set A/D data flow result=40 15:34:08 Set A/D channel type result=40 15:34:08 Set A/D encoding result=40 15:34:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:34:08 Set channel filter=0.000000e+000 result=40 15:34:08 Config A/D Result=40 15:34:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:34:08 Get A/D filter: -9.255963e+061 result=40 15:34:08 Get A/D value=-858993460 result=40 15:34:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:34:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:34:08 Parameters OK 15:34:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:34:08 Set A/D data flow result=40 15:34:08 Set A/D channel type result=40 15:34:08 Set A/D encoding result=40 15:34:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:34:08 Set channel filter=0.000000e+000 result=40 15:34:08 Config A/D Result=40 15:34:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:34:08 Get A/D filter: -9.255963e+061 result=40 15:34:08 Get A/D value=-858993460 result=40 15:34:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:34:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:34:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:34:08 Aux= 15:34:08 Message to Camera, serial 69260 queued 15:34:17 Received message from Master: op=Shutter serial=69270 15:34:17 Shutter LASER close 15:34:17 Received message from Master: op=PointingHead serial=69274 15:34:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:34:17 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:34:18 Point started: ret=0 15:34:18 point_skyscan result=0 15:34:18 Check angles 15:34:18 SkyScan query 15:34:19 SkyScan query done: ret=0 az=90.18<-6012 ze=157.575<-1495 Statuses=0009 0009 15:34:19 Msec=0 True Az=90.18 Ze=157.575 Az status=0009 Ze status=0009 15:34:19 Check angles 15:34:19 SkyScan query 15:34:20 SkyScan query done: ret=0 az=72.315<-4821 ze=136.155<-2923 Statuses=0009 0009 15:34:20 Msec=750 True Az=72.315 Ze=136.155 Az status=0009 Ze status=0009 15:34:20 Check angles 15:34:20 SkyScan query 15:34:21 SkyScan query done: ret=0 az=54.72<-3648 ze=114.765<-4349 Statuses=0009 0009 15:34:21 Msec=1500 True Az=54.72 Ze=114.765 Az status=0009 Ze status=0009 15:34:21 Check angles 15:34:21 SkyScan query 15:34:21 SkyScan query done: ret=0 az=40.905<-2727 ze=93.81<-5746 Statuses=0009 0009 15:34:21 Msec=2250 True Az=40.905 Ze=93.81 Az status=0009 Ze status=0009 15:34:21 Check angles 15:34:21 SkyScan query 15:34:22 SkyScan query done: ret=0 az=40.995<-2733 ze=72.855<-7143 Statuses=0008 0009 15:34:22 Msec=3000 True Az=40.995 Ze=72.855 Az status=0008 Ze status=0009 15:34:22 Check angles 15:34:22 SkyScan query 15:34:23 SkyScan query done: ret=0 az=40.995<-2733 ze=52.485<-8501 Statuses=0008 0009 15:34:23 Msec=3750 True Az=40.995 Ze=52.485 Az status=0008 Ze status=0009 15:34:23 Check angles 15:34:23 SkyScan query 15:34:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:34:24 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:34:24 Message to Master queued w/err=0: serial=69274 error=0 15:34:29 Received message from Master: op=Filter serial=69275 15:34:29 Color wheel filter change from 0 to 0 15:34:29 FLIGetFilterPos err=0 currentPosition=0 15:34:29 FLIGetStepsRemaining err=0 RemainingSteps=0 15:34:29 Filter is already there-color wheel unchanged 15:34:29 Received message from Master: op=Shutter serial=69276 15:34:29 Shutter LASER close 15:34:29 Received message from Camera: op=State serial=69278 15:34:29 GetSingleValue result=40 Value=cccccccc 15:34:29 SkyScan query 15:34:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:34:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:34:29 Parameters OK 15:34:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:34:29 Set A/D data flow result=40 15:34:29 Set A/D channel type result=40 15:34:29 Set A/D encoding result=40 15:34:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:34:29 Set channel filter=0.000000e+000 result=40 15:34:29 Config A/D Result=40 15:34:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:34:29 Get A/D filter: -9.255963e+061 result=40 15:34:29 Get A/D value=-858993460 result=40 15:34:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:34:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:34:29 Parameters OK 15:34:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:34:29 Set A/D data flow result=40 15:34:29 Set A/D channel type result=40 15:34:29 Set A/D encoding result=40 15:34:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:34:29 Set channel filter=0.000000e+000 result=40 15:34:29 Config A/D Result=40 15:34:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:34:29 Get A/D filter: -9.255963e+061 result=40 15:34:29 Get A/D value=-858993460 result=40 15:34:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:34:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:34:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:34:29 Aux= 15:34:29 Message to Camera, serial 69278 queued 15:35:06 Received message from Master: op=PointingHead serial=69291 15:35:06 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:35:06 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:35:07 Point started: ret=0 15:35:07 point_skyscan result=0 15:35:07 Check angles 15:35:07 SkyScan query 15:35:08 SkyScan query done: ret=0 az=64.275<-4285 ze=66.57<-7562 Statuses=0009 0008 15:35:08 Msec=0 True Az=64.275 Ze=66.57 Az status=0009 Ze status=0008 15:35:08 Check angles 15:35:08 SkyScan query 15:35:09 SkyScan query done: ret=0 az=82.005<-5467 ze=66.51<-7566 Statuses=0009 0008 15:35:09 Msec=750 True Az=82.005 Ze=66.51 Az status=0009 Ze status=0008 15:35:09 Check angles 15:35:09 SkyScan query 15:35:09 SkyScan query done: ret=0 az=99.69<-6646 ze=66.51<-7566 Statuses=0009 0008 15:35:09 Msec=1500 True Az=99.69 Ze=66.51 Az status=0009 Ze status=0008 15:35:10 Check angles 15:35:10 SkyScan query 15:35:10 SkyScan query done: ret=0 az=117.195<-7813 ze=66.51<-7566 Statuses=0009 0008 15:35:10 Msec=2250 True Az=117.195 Ze=66.51 Az status=0009 Ze status=0008 15:35:10 Check angles 15:35:10 SkyScan query 15:35:11 SkyScan query done: ret=0 az=134.61<-8974 ze=66.51<-7566 Statuses=0009 0008 15:35:11 Msec=3000 True Az=134.61 Ze=66.51 Az status=0009 Ze status=0008 15:35:11 Check angles 15:35:11 SkyScan query 15:35:12 SkyScan query done: ret=0 az=152.085<-10139 ze=66.51<-7566 Statuses=0009 0008 15:35:12 Msec=3750 True Az=152.085 Ze=66.51 Az status=0009 Ze status=0008 15:35:12 Check angles 15:35:12 SkyScan query 15:35:12 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 15:35:12 Msec=4500 True Az=157.995 Ze=66.51 Az status=0008 Ze status=0008 15:35:12 Message to Master queued w/err=0: serial=69291 error=0 15:35:17 Received message from Master: op=Filter serial=69292 15:35:17 Color wheel filter change from 0 to 0 15:35:17 FLIGetFilterPos err=0 currentPosition=0 15:35:17 FLIGetStepsRemaining err=0 RemainingSteps=0 15:35:17 Filter is already there-color wheel unchanged 15:35:18 Received message from Master: op=Shutter serial=69293 15:35:18 Shutter LASER close 15:35:18 Received message from Camera: op=State serial=69295 15:35:18 GetSingleValue result=40 Value=cccccccc 15:35:18 SkyScan query 15:35:18 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 15:35:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:35:18 Parameters OK 15:35:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:35:18 Set A/D data flow result=40 15:35:18 Set A/D channel type result=40 15:35:18 Set A/D encoding result=40 15:35:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:35:18 Set channel filter=0.000000e+000 result=40 15:35:18 Config A/D Result=40 15:35:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:35:18 Get A/D filter: -9.255963e+061 result=40 15:35:18 Get A/D value=-858993460 result=40 15:35:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:35:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:35:18 Parameters OK 15:35:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:35:18 Set A/D data flow result=40 15:35:18 Set A/D channel type result=40 15:35:18 Set A/D encoding result=40 15:35:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:35:18 Set channel filter=0.000000e+000 result=40 15:35:18 Config A/D Result=40 15:35:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:35:18 Get A/D filter: -9.255963e+061 result=40 15:35:18 Get A/D value=-858993460 result=40 15:35:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:35:18 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:35:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:35:18 Aux= 15:35:18 Message to Camera, serial 69295 queued [UTC 2018-12-11 15:35:54] 15:35:55 Received message from Master: op=PointingHead serial=69308 15:35:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:35:55 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:35:55 Point started: ret=0 15:35:55 point_skyscan result=0 15:35:56 Check angles 15:35:56 SkyScan query 15:35:57 SkyScan query done: ret=0 az=134.715<-8981 ze=36.435<-9571 Statuses=0009 0009 15:35:57 Msec=0 True Az=134.715 Ze=36.435 Az status=0009 Ze status=0009 15:35:57 Check angles 15:35:57 SkyScan query 15:35:58 SkyScan query done: ret=0 az=117.18<-7812 ze=15.51<-10966 Statuses=0009 0009 15:35:58 Msec=750 True Az=117.18 Ze=15.51 Az status=0009 Ze status=0009 15:35:58 Check angles 15:35:58 SkyScan query 15:35:58 SkyScan query done: ret=0 az=99.915<-6661 ze=-5.49<-12366 Statuses=0009 0009 15:35:58 Msec=1500 True Az=99.915 Ze=-5.49 Az status=0009 Ze status=0009 15:35:58 Check angles 15:35:58 SkyScan query 15:35:59 SkyScan query done: ret=0 az=82.32<-5488 ze=-26.415<-13761 Statuses=0009 0009 15:35:59 Msec=2250 True Az=82.32 Ze=-26.415 Az status=0009 Ze status=0009 15:35:59 Check angles 15:35:59 SkyScan query 15:36:00 SkyScan query done: ret=0 az=64.515<-4301 ze=-38.58<-14572 Statuses=0009 0008 15:36:00 Msec=3000 True Az=64.515 Ze=-38.58 Az status=0009 Ze status=0008 15:36:00 Check angles 15:36:00 SkyScan query 15:36:01 SkyScan query done: ret=0 az=47.07<-3138 ze=-38.52<-14568 Statuses=0009 0008 15:36:01 Msec=3750 True Az=47.07 Ze=-38.52 Az status=0009 Ze status=0008 15:36:01 Check angles 15:36:01 SkyScan query 15:36:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:36:01 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:36:01 Message to Master queued w/err=0: serial=69308 error=0 15:36:06 Received message from Master: op=Filter serial=69309 15:36:06 Color wheel filter change from 0 to 0 15:36:06 FLIGetFilterPos err=0 currentPosition=0 15:36:06 FLIGetStepsRemaining err=0 RemainingSteps=0 15:36:06 Filter is already there-color wheel unchanged 15:36:06 Received message from Master: op=Shutter serial=69310 15:36:06 Shutter LASER close 15:36:07 Received message from Camera: op=State serial=69312 15:36:07 GetSingleValue result=40 Value=cccccccc 15:36:07 SkyScan query 15:36:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:36:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:07 Parameters OK 15:36:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:07 Set A/D data flow result=40 15:36:07 Set A/D channel type result=40 15:36:07 Set A/D encoding result=40 15:36:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:07 Set channel filter=0.000000e+000 result=40 15:36:07 Config A/D Result=40 15:36:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:07 Get A/D filter: -9.255963e+061 result=40 15:36:07 Get A/D value=-858993460 result=40 15:36:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:07 Parameters OK 15:36:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:07 Set A/D data flow result=40 15:36:07 Set A/D channel type result=40 15:36:07 Set A/D encoding result=40 15:36:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:07 Set channel filter=0.000000e+000 result=40 15:36:07 Config A/D Result=40 15:36:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:07 Get A/D filter: -9.255963e+061 result=40 15:36:07 Get A/D value=-858993460 result=40 15:36:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:36:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:36:07 Aux= 15:36:07 Message to Camera, serial 69312 queued 15:36:44 Received message from Master: op=PointingHead serial=69325 15:36:44 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:36:44 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:36:44 Point started: ret=0 15:36:44 point_skyscan result=0 15:36:45 Check angles 15:36:45 SkyScan query 15:36:46 SkyScan query done: ret=0 az=64.545<-4303 ze=-68.76<-16584 Statuses=0009 0009 15:36:46 Msec=0 True Az=64.545 Ze=-68.76 Az status=0009 Ze status=0009 15:36:46 Check angles 15:36:46 SkyScan query 15:36:46 SkyScan query done: ret=0 az=82.29<-5486 ze=-90.18<-18012 Statuses=0009 0009 15:36:46 Msec=750 True Az=82.29 Ze=-90.18 Az status=0009 Ze status=0009 15:36:47 Check angles 15:36:47 SkyScan query 15:36:47 SkyScan query done: ret=0 az=99.915<-6661 ze=-111.12<-19408 Statuses=0009 0009 15:36:47 Msec=1500 True Az=99.915 Ze=-111.12 Az status=0009 Ze status=0009 15:36:47 Check angles 15:36:47 SkyScan query 15:36:48 SkyScan query done: ret=0 az=117.375<-7825 ze=-132.045<-20803 Statuses=0009 0009 15:36:48 Msec=2250 True Az=117.375 Ze=-132.045 Az status=0009 Ze status=0009 15:36:48 Check angles 15:36:48 SkyScan query 15:36:49 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 15:36:49 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 15:36:49 Check angles 15:36:49 SkyScan query 15:36:49 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 15:36:49 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 15:36:49 Message to Master queued w/err=0: serial=69325 error=0 15:36:54 Received message from Master: op=Filter serial=69326 15:36:54 Color wheel filter change from 0 to 0 15:36:54 FLIGetFilterPos err=0 currentPosition=0 15:36:54 FLIGetStepsRemaining err=0 RemainingSteps=0 15:36:54 Filter is already there-color wheel unchanged 15:36:55 Received message from Master: op=Shutter serial=69327 15:36:55 Shutter LASER close 15:36:55 Received message from Camera: op=State serial=69329 15:36:55 GetSingleValue result=40 Value=cccccccc 15:36:55 SkyScan query 15:36:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:36:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:55 Parameters OK 15:36:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:55 Set A/D data flow result=40 15:36:55 Set A/D channel type result=40 15:36:55 Set A/D encoding result=40 15:36:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:55 Set channel filter=0.000000e+000 result=40 15:36:55 Config A/D Result=40 15:36:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:55 Get A/D filter: -9.255963e+061 result=40 15:36:55 Get A/D value=-858993460 result=40 15:36:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:55 Parameters OK 15:36:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:55 Set A/D data flow result=40 15:36:55 Set A/D channel type result=40 15:36:55 Set A/D encoding result=40 15:36:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:55 Set channel filter=0.000000e+000 result=40 15:36:55 Config A/D Result=40 15:36:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:55 Get A/D filter: -9.255963e+061 result=40 15:36:55 Get A/D value=-858993460 result=40 15:36:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:55 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:36:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:36:55 Aux= 15:36:55 Message to Camera, serial 69329 queued 15:37:32 Received message from Master: op=PointingHead serial=69342 15:37:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:37:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:37:32 Point started: ret=0 15:37:32 point_skyscan result=0 15:37:33 Check angles 15:37:33 SkyScan query 15:37:34 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.24<-23416 Statuses=0009 0009 15:37:34 Msec=0 True Az=113.01 Ze=-171.24 Az status=0009 Ze status=0009 15:37:34 Check angles 15:37:34 SkyScan query 15:37:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:37:34 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:37:34 Message to Master queued w/err=0: serial=69342 error=0 15:37:39 Received message from Master: op=Filter serial=69343 15:37:39 Color wheel filter change from 0 to 0 15:37:39 FLIGetFilterPos err=0 currentPosition=0 15:37:39 FLIGetStepsRemaining err=0 RemainingSteps=0 15:37:39 Filter is already there-color wheel unchanged 15:37:40 Received message from Master: op=Shutter serial=69344 15:37:40 Shutter LASER open 15:37:40 Received message from Camera: op=State serial=69346 15:37:40 GetSingleValue result=40 Value=cccccccc 15:37:40 SkyScan query 15:37:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:37:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:37:40 Parameters OK 15:37:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:37:40 Set A/D data flow result=40 15:37:40 Set A/D channel type result=40 15:37:40 Set A/D encoding result=40 15:37:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:37:40 Set channel filter=0.000000e+000 result=40 15:37:40 Config A/D Result=40 15:37:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:37:40 Get A/D filter: -9.255963e+061 result=40 15:37:40 Get A/D value=-858993460 result=40 15:37:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:37:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:37:40 Parameters OK 15:37:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:37:40 Set A/D data flow result=40 15:37:40 Set A/D channel type result=40 15:37:40 Set A/D encoding result=40 15:37:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:37:40 Set channel filter=0.000000e+000 result=40 15:37:40 Config A/D Result=40 15:37:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:37:40 Get A/D filter: -9.255963e+061 result=40 15:37:40 Get A/D value=-858993460 result=40 15:37:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:37:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:37:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:37:40 Aux= 15:37:40 Message to Camera, serial 69346 queued 15:37:49 Received message from Master: op=Shutter serial=69356 15:37:49 Shutter LASER close 15:37:49 Received message from Master: op=PointingHead serial=69360 15:37:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:37:49 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:37:50 Point started: ret=0 15:37:50 point_skyscan result=0 15:37:50 Check angles 15:37:50 SkyScan query 15:37:51 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.785<-21519 Statuses=0009 0009 15:37:51 Msec=0 True Az=136.35 Ze=-142.785 Az status=0009 Ze status=0009 15:37:51 Check angles 15:37:51 SkyScan query 15:37:52 SkyScan query done: ret=0 az=154.215<-10281 ze=-121.44<-20096 Statuses=0009 0009 15:37:52 Msec=750 True Az=154.215 Ze=-121.44 Az status=0009 Ze status=0009 15:37:52 Check angles 15:37:52 SkyScan query 15:37:53 SkyScan query done: ret=0 az=171.585<-11439 ze=-100.38<-18692 Statuses=0009 0009 15:37:53 Msec=1500 True Az=171.585 Ze=-100.38 Az status=0009 Ze status=0009 15:37:53 Check angles 15:37:53 SkyScan query 15:37:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.035<-17269 Statuses=0008 0009 15:37:53 Msec=2250 True Az=176.01 Ze=-79.035 Az status=0008 Ze status=0009 15:37:54 Check angles 15:37:54 SkyScan query 15:37:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-57.675<-15845 Statuses=0008 0009 15:37:54 Msec=3000 True Az=175.995 Ze=-57.675 Az status=0008 Ze status=0009 15:37:54 Check angles 15:37:54 SkyScan query 15:37:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 15:37:55 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 15:37:55 Message to Master queued w/err=0: serial=69360 error=0 15:38:00 Received message from Master: op=Filter serial=69361 15:38:00 Color wheel filter change from 0 to 0 15:38:00 FLIGetFilterPos err=0 currentPosition=0 15:38:00 FLIGetStepsRemaining err=0 RemainingSteps=0 15:38:00 Filter is already there-color wheel unchanged 15:38:00 Received message from Master: op=Shutter serial=69362 15:38:00 Shutter LASER close 15:38:00 Received message from Camera: op=State serial=69364 15:38:00 GetSingleValue result=40 Value=cccccccc 15:38:00 SkyScan query 15:38:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:38:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:38:01 Parameters OK 15:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:38:01 Set A/D data flow result=40 15:38:01 Set A/D channel type result=40 15:38:01 Set A/D encoding result=40 15:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:38:01 Set channel filter=0.000000e+000 result=40 15:38:01 Config A/D Result=40 15:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:38:01 Get A/D filter: -9.255963e+061 result=40 15:38:01 Get A/D value=-858993460 result=40 15:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:38:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:38:01 Parameters OK 15:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:38:01 Set A/D data flow result=40 15:38:01 Set A/D channel type result=40 15:38:01 Set A/D encoding result=40 15:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:38:01 Set channel filter=0.000000e+000 result=40 15:38:01 Config A/D Result=40 15:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:38:01 Get A/D filter: -9.255963e+061 result=40 15:38:01 Get A/D value=-858993460 result=40 15:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:38:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:38:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:38:01 Aux= 15:38:01 Message to Camera, serial 69364 queued 15:38:38 Received message from Master: op=PointingHead serial=69377 15:38:38 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:38:38 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:38:38 Point started: ret=0 15:38:38 point_skyscan result=0 15:38:39 Check angles 15:38:39 SkyScan query 15:38:39 SkyScan query done: ret=0 az=153.18<-10212 ze=-22.02<-13468 Statuses=0009 0009 15:38:39 Msec=0 True Az=153.18 Ze=-22.02 Az status=0009 Ze status=0009 15:38:39 Check angles 15:38:39 SkyScan query 15:38:40 SkyScan query done: ret=0 az=135.78<-9052 ze=-1.035<-12069 Statuses=0009 0009 15:38:40 Msec=750 True Az=135.78 Ze=-1.035 Az status=0009 Ze status=0009 15:38:40 Check angles 15:38:40 SkyScan query 15:38:41 SkyScan query done: ret=0 az=118.185<-7879 ze=19.905<-10673 Statuses=0009 0009 15:38:41 Msec=1500 True Az=118.185 Ze=19.905 Az status=0009 Ze status=0009 15:38:41 Check angles 15:38:41 SkyScan query 15:38:42 SkyScan query done: ret=0 az=100.65<-6710 ze=40.875<-9275 Statuses=0009 0009 15:38:42 Msec=2250 True Az=100.65 Ze=40.875 Az status=0009 Ze status=0009 15:38:42 Check angles 15:38:42 SkyScan query 15:38:42 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 15:38:42 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 15:38:42 Check angles 15:38:42 SkyScan query 15:38:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:38:43 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:38:43 Message to Master queued w/err=0: serial=69377 error=0 15:38:48 Received message from Master: op=Filter serial=69378 15:38:48 Color wheel filter change from 0 to 0 15:38:48 FLIGetFilterPos err=0 currentPosition=0 15:38:48 FLIGetStepsRemaining err=0 RemainingSteps=0 15:38:48 Filter is already there-color wheel unchanged 15:38:48 Received message from Master: op=Shutter serial=69379 15:38:48 Shutter LASER close 15:38:48 Received message from Camera: op=State serial=69381 15:38:48 GetSingleValue result=40 Value=cccccccc 15:38:48 SkyScan query 15:38:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:38:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:38:49 Parameters OK 15:38:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:38:49 Set A/D data flow result=40 15:38:49 Set A/D channel type result=40 15:38:49 Set A/D encoding result=40 15:38:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:38:49 Set channel filter=0.000000e+000 result=40 15:38:49 Config A/D Result=40 15:38:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:38:49 Get A/D filter: -9.255963e+061 result=40 15:38:49 Get A/D value=-858993460 result=40 15:38:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:38:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:38:49 Parameters OK 15:38:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:38:49 Set A/D data flow result=40 15:38:49 Set A/D channel type result=40 15:38:49 Set A/D encoding result=40 15:38:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:38:49 Set channel filter=0.000000e+000 result=40 15:38:49 Config A/D Result=40 15:38:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:38:49 Get A/D filter: -9.255963e+061 result=40 15:38:49 Get A/D value=-858993460 result=40 15:38:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:38:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:38:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:38:49 Aux= 15:38:49 Message to Camera, serial 69381 queued 15:39:26 Received message from Master: op=PointingHead serial=69394 15:39:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:39:26 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:39:26 Point started: ret=0 15:39:26 point_skyscan result=0 15:39:27 Check angles 15:39:27 SkyScan query 15:39:27 SkyScan query done: ret=0 az=109.245<-7283 ze=38.49<-9434 Statuses=0009 0008 15:39:27 Msec=0 True Az=109.245 Ze=38.49 Az status=0009 Ze status=0008 15:39:28 Check angles 15:39:28 SkyScan query 15:39:28 SkyScan query done: ret=0 az=126.765<-8451 ze=38.505<-9433 Statuses=0009 0008 15:39:28 Msec=750 True Az=126.765 Ze=38.505 Az status=0009 Ze status=0008 15:39:28 Check angles 15:39:28 SkyScan query 15:39:29 SkyScan query done: ret=0 az=144.585<-9639 ze=38.505<-9433 Statuses=0009 0008 15:39:29 Msec=1500 True Az=144.585 Ze=38.505 Az status=0009 Ze status=0008 15:39:29 Check angles 15:39:29 SkyScan query 15:39:30 SkyScan query done: ret=0 az=162.03<-10802 ze=38.505<-9433 Statuses=0009 0008 15:39:30 Msec=2250 True Az=162.03 Ze=38.505 Az status=0009 Ze status=0008 15:39:30 Check angles 15:39:30 SkyScan query 15:39:30 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:39:30 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:39:31 Check angles 15:39:31 SkyScan query 15:39:31 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:39:31 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:39:31 Message to Master queued w/err=0: serial=69394 error=0 15:39:36 Received message from Master: op=Filter serial=69395 15:39:36 Color wheel filter change from 0 to 0 15:39:36 FLIGetFilterPos err=0 currentPosition=0 15:39:36 FLIGetStepsRemaining err=0 RemainingSteps=0 15:39:36 Filter is already there-color wheel unchanged 15:39:36 Received message from Master: op=Shutter serial=69396 15:39:36 Shutter LASER close 15:39:36 Received message from Camera: op=State serial=69398 15:39:36 GetSingleValue result=40 Value=cccccccc 15:39:36 SkyScan query 15:39:37 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:39:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:39:37 Parameters OK 15:39:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:39:37 Set A/D data flow result=40 15:39:37 Set A/D channel type result=40 15:39:37 Set A/D encoding result=40 15:39:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:39:37 Set channel filter=0.000000e+000 result=40 15:39:37 Config A/D Result=40 15:39:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:39:37 Get A/D filter: -9.255963e+061 result=40 15:39:37 Get A/D value=-858993460 result=40 15:39:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:39:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:39:37 Parameters OK 15:39:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:39:37 Set A/D data flow result=40 15:39:37 Set A/D channel type result=40 15:39:37 Set A/D encoding result=40 15:39:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:39:37 Set channel filter=0.000000e+000 result=40 15:39:37 Config A/D Result=40 15:39:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:39:37 Get A/D filter: -9.255963e+061 result=40 15:39:37 Get A/D value=-858993460 result=40 15:39:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:39:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:39:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:39:37 Aux= 15:39:37 Message to Camera, serial 69398 queued 15:40:14 Received message from Master: op=PointingHead serial=69411 15:40:14 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:40:14 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:40:14 Point started: ret=0 15:40:14 point_skyscan result=0 15:40:15 Check angles 15:40:15 SkyScan query 15:40:16 SkyScan query done: ret=0 az=152.61<-10174 ze=8.205<-11453 Statuses=0009 0009 15:40:16 Msec=0 True Az=152.61 Ze=8.205 Az status=0009 Ze status=0009 15:40:16 Check angles 15:40:16 SkyScan query 15:40:16 SkyScan query done: ret=0 az=135.195<-9013 ze=-12.705<-12847 Statuses=0009 0009 15:40:16 Msec=750 True Az=135.195 Ze=-12.705 Az status=0009 Ze status=0009 15:40:17 Check angles 15:40:17 SkyScan query 15:40:17 SkyScan query done: ret=0 az=117.06<-7804 ze=-34.125<-14275 Statuses=0009 0009 15:40:17 Msec=1500 True Az=117.06 Ze=-34.125 Az status=0009 Ze status=0009 15:40:17 Check angles 15:40:17 SkyScan query 15:40:18 SkyScan query done: ret=0 az=99.915<-6661 ze=-51.57<-15438 Statuses=0009 0009 15:40:18 Msec=2250 True Az=99.915 Ze=-51.57 Az status=0009 Ze status=0009 15:40:18 Check angles 15:40:18 SkyScan query 15:40:19 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 15:40:19 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 15:40:19 Check angles 15:40:19 SkyScan query 15:40:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:40:19 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:40:19 Message to Master queued w/err=0: serial=69411 error=0 15:40:24 Received message from Master: op=Filter serial=69412 15:40:24 Color wheel filter change from 0 to 0 15:40:24 FLIGetFilterPos err=0 currentPosition=0 15:40:24 FLIGetStepsRemaining err=0 RemainingSteps=0 15:40:24 Filter is already there-color wheel unchanged 15:40:25 Received message from Master: op=Shutter serial=69413 15:40:25 Shutter LASER close 15:40:25 Received message from Camera: op=State serial=69415 15:40:25 GetSingleValue result=40 Value=cccccccc 15:40:25 SkyScan query 15:40:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:40:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:40:25 Parameters OK 15:40:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:40:25 Set A/D data flow result=40 15:40:25 Set A/D channel type result=40 15:40:25 Set A/D encoding result=40 15:40:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:40:25 Set channel filter=0.000000e+000 result=40 15:40:25 Config A/D Result=40 15:40:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:40:25 Get A/D filter: -9.255963e+061 result=40 15:40:25 Get A/D value=-858993460 result=40 15:40:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:40:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:40:25 Parameters OK 15:40:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:40:25 Set A/D data flow result=40 15:40:25 Set A/D channel type result=40 15:40:25 Set A/D encoding result=40 15:40:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:40:25 Set channel filter=0.000000e+000 result=40 15:40:25 Config A/D Result=40 15:40:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:40:25 Get A/D filter: -9.255963e+061 result=40 15:40:25 Get A/D value=-858993460 result=40 15:40:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:40:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:40:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:40:25 Aux= 15:40:25 Message to Camera, serial 69415 queued 15:41:02 Received message from Master: op=PointingHead serial=69428 15:41:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:41:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:41:02 Point started: ret=0 15:41:02 point_skyscan result=0 15:41:03 Check angles 15:41:03 SkyScan query 15:41:04 SkyScan query done: ret=0 az=109.32<-7288 ze=-81.435<-17429 Statuses=0009 0009 15:41:04 Msec=0 True Az=109.32 Ze=-81.435 Az status=0009 Ze status=0009 15:41:04 Check angles 15:41:04 SkyScan query 15:41:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.42<-18828 Statuses=0008 0009 15:41:04 Msec=750 True Az=112.995 Ze=-102.42 Az status=0008 Ze status=0009 15:41:05 Check angles 15:41:05 SkyScan query 15:41:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.36<-20224 Statuses=0008 0009 15:41:05 Msec=1500 True Az=112.995 Ze=-123.36 Az status=0008 Ze status=0009 15:41:05 Check angles 15:41:05 SkyScan query 15:41:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.345<-21623 Statuses=0008 0009 15:41:06 Msec=2250 True Az=112.995 Ze=-144.345 Az status=0008 Ze status=0009 15:41:06 Check angles 15:41:06 SkyScan query 15:41:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.285<-23019 Statuses=0008 0009 15:41:07 Msec=3000 True Az=112.995 Ze=-165.285 Az status=0008 Ze status=0009 15:41:07 Check angles 15:41:07 SkyScan query 15:41:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:41:07 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:41:07 Message to Master queued w/err=0: serial=69428 error=0 15:41:12 Received message from Master: op=Filter serial=69429 15:41:12 Color wheel filter change from 0 to 0 15:41:12 FLIGetFilterPos err=0 currentPosition=0 15:41:12 FLIGetStepsRemaining err=0 RemainingSteps=0 15:41:12 Filter is already there-color wheel unchanged 15:41:13 Received message from Master: op=Shutter serial=69430 15:41:13 Shutter LASER open 15:41:13 Received message from Camera: op=State serial=69432 15:41:13 GetSingleValue result=40 Value=cccccccc 15:41:13 SkyScan query 15:41:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:41:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:41:13 Parameters OK 15:41:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:41:13 Set A/D data flow result=40 15:41:13 Set A/D channel type result=40 15:41:13 Set A/D encoding result=40 15:41:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:41:13 Set channel filter=0.000000e+000 result=40 15:41:13 Config A/D Result=40 15:41:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:41:13 Get A/D filter: -9.255963e+061 result=40 15:41:13 Get A/D value=-858993460 result=40 15:41:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:41:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:41:13 Parameters OK 15:41:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:41:13 Set A/D data flow result=40 15:41:13 Set A/D channel type result=40 15:41:13 Set A/D encoding result=40 15:41:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:41:13 Set channel filter=0.000000e+000 result=40 15:41:13 Config A/D Result=40 15:41:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:41:13 Get A/D filter: -9.255963e+061 result=40 15:41:13 Get A/D value=-858993460 result=40 15:41:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:41:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:41:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:41:13 Aux= 15:41:13 Message to Camera, serial 69432 queued 15:41:22 Received message from Master: op=Shutter serial=69442 15:41:22 Shutter LASER close 15:41:22 Received message from Master: op=PointingHead serial=69446 15:41:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:41:22 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:41:23 Point started: ret=0 15:41:23 point_skyscan result=0 15:41:23 Check angles 15:41:23 SkyScan query 15:41:24 SkyScan query done: ret=0 az=90.045<-6003 ze=157.38<-1508 Statuses=0009 0009 15:41:24 Msec=0 True Az=90.045 Ze=157.38 Az status=0009 Ze status=0009 15:41:24 Check angles 15:41:24 SkyScan query 15:41:25 SkyScan query done: ret=0 az=72.6<-4840 ze=136.38<-2908 Statuses=0009 0009 15:41:25 Msec=750 True Az=72.6 Ze=136.38 Az status=0009 Ze status=0009 15:41:25 Check angles 15:41:25 SkyScan query 15:41:25 SkyScan query done: ret=0 az=54.84<-3656 ze=115.05<-4330 Statuses=0009 0009 15:41:25 Msec=1500 True Az=54.84 Ze=115.05 Az status=0009 Ze status=0009 15:41:26 Check angles 15:41:26 SkyScan query 15:41:26 SkyScan query done: ret=0 az=40.935<-2729 ze=93.66<-5756 Statuses=0009 0009 15:41:26 Msec=2250 True Az=40.935 Ze=93.66 Az status=0009 Ze status=0009 15:41:26 Check angles 15:41:26 SkyScan query 15:41:27 SkyScan query done: ret=0 az=40.995<-2733 ze=72.675<-7155 Statuses=0008 0009 15:41:27 Msec=3000 True Az=40.995 Ze=72.675 Az status=0008 Ze status=0009 15:41:27 Check angles 15:41:27 SkyScan query 15:41:28 SkyScan query done: ret=0 az=40.995<-2733 ze=52.395<-8507 Statuses=0008 0009 15:41:28 Msec=3750 True Az=40.995 Ze=52.395 Az status=0008 Ze status=0009 15:41:28 Check angles 15:41:28 SkyScan query 15:41:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:41:28 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:41:28 Message to Master queued w/err=0: serial=69446 error=0 15:41:33 Received message from Master: op=Filter serial=69447 15:41:33 Color wheel filter change from 0 to 0 15:41:33 FLIGetFilterPos err=0 currentPosition=0 15:41:33 FLIGetStepsRemaining err=0 RemainingSteps=0 15:41:33 Filter is already there-color wheel unchanged 15:41:34 Received message from Master: op=Shutter serial=69448 15:41:34 Shutter LASER close 15:41:34 Received message from Camera: op=State serial=69450 15:41:34 GetSingleValue result=40 Value=cccccccc 15:41:34 SkyScan query 15:41:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:41:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:41:34 Parameters OK 15:41:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:41:34 Set A/D data flow result=40 15:41:34 Set A/D channel type result=40 15:41:34 Set A/D encoding result=40 15:41:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:41:34 Set channel filter=0.000000e+000 result=40 15:41:34 Config A/D Result=40 15:41:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:41:34 Get A/D filter: -9.255963e+061 result=40 15:41:34 Get A/D value=-858993460 result=40 15:41:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:41:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:41:34 Parameters OK 15:41:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:41:34 Set A/D data flow result=40 15:41:34 Set A/D channel type result=40 15:41:34 Set A/D encoding result=40 15:41:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:41:34 Set channel filter=0.000000e+000 result=40 15:41:34 Config A/D Result=40 15:41:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:41:34 Get A/D filter: -9.255963e+061 result=40 15:41:34 Get A/D value=-858993460 result=40 15:41:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:41:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:41:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:41:34 Aux= 15:41:34 Message to Camera, serial 69450 queued 15:42:11 Received message from Master: op=PointingHead serial=69463 15:42:11 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:42:11 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:42:11 Point started: ret=0 15:42:11 point_skyscan result=0 15:42:12 Check angles 15:42:12 SkyScan query 15:42:13 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 15:42:13 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 15:42:13 Check angles 15:42:13 SkyScan query 15:42:14 SkyScan query done: ret=0 az=81.51<-5434 ze=66.495<-7567 Statuses=0009 0008 15:42:14 Msec=750 True Az=81.51 Ze=66.495 Az status=0009 Ze status=0008 15:42:14 Check angles 15:42:14 SkyScan query 15:42:14 SkyScan query done: ret=0 az=99.06<-6604 ze=66.495<-7567 Statuses=0009 0008 15:42:14 Msec=1500 True Az=99.06 Ze=66.495 Az status=0009 Ze status=0008 15:42:14 Check angles 15:42:14 SkyScan query 15:42:15 SkyScan query done: ret=0 az=116.715<-7781 ze=66.495<-7567 Statuses=0009 0008 15:42:15 Msec=2250 True Az=116.715 Ze=66.495 Az status=0009 Ze status=0008 15:42:15 Check angles 15:42:15 SkyScan query 15:42:16 SkyScan query done: ret=0 az=134.205<-8947 ze=66.495<-7567 Statuses=0009 0008 15:42:16 Msec=3000 True Az=134.205 Ze=66.495 Az status=0009 Ze status=0008 15:42:16 Check angles 15:42:16 SkyScan query 15:42:17 SkyScan query done: ret=0 az=151.545<-10103 ze=66.495<-7567 Statuses=0009 0008 15:42:17 Msec=3750 True Az=151.545 Ze=66.495 Az status=0009 Ze status=0008 15:42:17 Check angles 15:42:17 SkyScan query 15:42:17 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:42:17 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 15:42:17 Message to Master queued w/err=0: serial=69463 error=0 15:42:22 Received message from Master: op=Filter serial=69464 15:42:22 Color wheel filter change from 0 to 0 15:42:22 FLIGetFilterPos err=0 currentPosition=0 15:42:22 FLIGetStepsRemaining err=0 RemainingSteps=0 15:42:22 Filter is already there-color wheel unchanged 15:42:22 Received message from Master: op=Shutter serial=69465 15:42:22 Shutter LASER close 15:42:23 Received message from Camera: op=State serial=69467 15:42:23 GetSingleValue result=40 Value=cccccccc 15:42:23 SkyScan query 15:42:23 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:42:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:42:23 Parameters OK 15:42:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:42:23 Set A/D data flow result=40 15:42:23 Set A/D channel type result=40 15:42:23 Set A/D encoding result=40 15:42:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:42:23 Set channel filter=0.000000e+000 result=40 15:42:23 Config A/D Result=40 15:42:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:42:23 Get A/D filter: -9.255963e+061 result=40 15:42:23 Get A/D value=-858993460 result=40 15:42:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:42:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:42:23 Parameters OK 15:42:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:42:23 Set A/D data flow result=40 15:42:23 Set A/D channel type result=40 15:42:23 Set A/D encoding result=40 15:42:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:42:23 Set channel filter=0.000000e+000 result=40 15:42:23 Config A/D Result=40 15:42:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:42:23 Get A/D filter: -9.255963e+061 result=40 15:42:23 Get A/D value=-858993460 result=40 15:42:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:42:23 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:42:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:42:23 Aux= 15:42:23 Message to Camera, serial 69467 queued 15:43:00 Received message from Master: op=PointingHead serial=69480 15:43:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:43:00 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:43:00 Point started: ret=0 15:43:00 point_skyscan result=0 15:43:01 Check angles 15:43:01 SkyScan query 15:43:02 SkyScan query done: ret=0 az=134.475<-8965 ze=36.255<-9583 Statuses=0009 0009 15:43:02 Msec=0 True Az=134.475 Ze=36.255 Az status=0009 Ze status=0009 15:43:02 Check angles 15:43:02 SkyScan query 15:43:02 SkyScan query done: ret=0 az=116.64<-7776 ze=14.85<-11010 Statuses=0009 0009 15:43:02 Msec=750 True Az=116.64 Ze=14.85 Az status=0009 Ze status=0009 15:43:03 Check angles 15:43:03 SkyScan query 15:43:03 SkyScan query done: ret=0 az=99.255<-6617 ze=-6.105<-12407 Statuses=0009 0009 15:43:03 Msec=1500 True Az=99.255 Ze=-6.105 Az status=0009 Ze status=0009 15:43:03 Check angles 15:43:03 SkyScan query 15:43:04 SkyScan query done: ret=0 az=81.735<-5449 ze=-27.075<-13805 Statuses=0009 0009 15:43:04 Msec=2250 True Az=81.735 Ze=-27.075 Az status=0009 Ze status=0009 15:43:04 Check angles 15:43:04 SkyScan query 15:43:05 SkyScan query done: ret=0 az=64.29<-4286 ze=-38.58<-14572 Statuses=0009 0008 15:43:05 Msec=3000 True Az=64.29 Ze=-38.58 Az status=0009 Ze status=0008 15:43:05 Check angles 15:43:05 SkyScan query 15:43:05 SkyScan query done: ret=0 az=46.905<-3127 ze=-38.52<-14568 Statuses=0009 0008 15:43:05 Msec=3750 True Az=46.905 Ze=-38.52 Az status=0009 Ze status=0008 15:43:06 Check angles 15:43:06 SkyScan query 15:43:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:43:06 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:43:06 Message to Master queued w/err=0: serial=69480 error=0 15:43:11 Received message from Master: op=Filter serial=69481 15:43:11 Color wheel filter change from 0 to 0 15:43:11 FLIGetFilterPos err=0 currentPosition=0 15:43:11 FLIGetStepsRemaining err=0 RemainingSteps=0 15:43:11 Filter is already there-color wheel unchanged 15:43:11 Received message from Master: op=Shutter serial=69482 15:43:11 Shutter LASER close 15:43:11 Received message from Camera: op=State serial=69484 15:43:11 GetSingleValue result=40 Value=cccccccc 15:43:11 SkyScan query 15:43:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:43:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:43:12 Parameters OK 15:43:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:43:12 Set A/D data flow result=40 15:43:12 Set A/D channel type result=40 15:43:12 Set A/D encoding result=40 15:43:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:43:12 Set channel filter=0.000000e+000 result=40 15:43:12 Config A/D Result=40 15:43:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:43:12 Get A/D filter: -9.255963e+061 result=40 15:43:12 Get A/D value=-858993460 result=40 15:43:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:43:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:43:12 Parameters OK 15:43:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:43:12 Set A/D data flow result=40 15:43:12 Set A/D channel type result=40 15:43:12 Set A/D encoding result=40 15:43:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:43:12 Set channel filter=0.000000e+000 result=40 15:43:12 Config A/D Result=40 15:43:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:43:12 Get A/D filter: -9.255963e+061 result=40 15:43:12 Get A/D value=-858993460 result=40 15:43:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:43:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:43:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:43:12 Aux= 15:43:12 Message to Camera, serial 69484 queued 15:43:49 Received message from Master: op=PointingHead serial=69497 15:43:49 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:43:49 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:43:49 Point started: ret=0 15:43:49 point_skyscan result=0 15:43:50 Check angles 15:43:50 SkyScan query 15:43:50 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.475<-16565 Statuses=0009 0009 15:43:50 Msec=0 True Az=64.2 Ze=-68.475 Az status=0009 Ze status=0009 15:43:51 Check angles 15:43:51 SkyScan query 15:43:51 SkyScan query done: ret=0 az=81.99<-5466 ze=-89.91<-17994 Statuses=0009 0009 15:43:51 Msec=750 True Az=81.99 Ze=-89.91 Az status=0009 Ze status=0009 15:43:51 Check angles 15:43:51 SkyScan query 15:43:52 SkyScan query done: ret=0 az=99.63<-6642 ze=-110.865<-19391 Statuses=0009 0009 15:43:52 Msec=1500 True Az=99.63 Ze=-110.865 Az status=0009 Ze status=0009 15:43:52 Check angles 15:43:52 SkyScan query 15:43:53 SkyScan query done: ret=0 az=117.045<-7803 ze=-131.775<-20785 Statuses=0009 0009 15:43:53 Msec=2250 True Az=117.045 Ze=-131.775 Az status=0009 Ze status=0009 15:43:53 Check angles 15:43:53 SkyScan query 15:43:53 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 15:43:53 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 15:43:54 Check angles 15:43:54 SkyScan query 15:43:54 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:43:54 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:43:54 Message to Master queued w/err=0: serial=69497 error=0 15:43:59 Received message from Master: op=Filter serial=69498 15:43:59 Color wheel filter change from 0 to 0 15:43:59 FLIGetFilterPos err=0 currentPosition=0 15:43:59 FLIGetStepsRemaining err=0 RemainingSteps=0 15:43:59 Filter is already there-color wheel unchanged 15:43:59 Received message from Master: op=Shutter serial=69499 15:43:59 Shutter LASER close 15:43:59 Received message from Camera: op=State serial=69501 15:43:59 GetSingleValue result=40 Value=cccccccc 15:43:59 SkyScan query 15:44:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:44:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:44:00 Parameters OK 15:44:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:44:00 Set A/D data flow result=40 15:44:00 Set A/D channel type result=40 15:44:00 Set A/D encoding result=40 15:44:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:44:00 Set channel filter=0.000000e+000 result=40 15:44:00 Config A/D Result=40 15:44:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:44:00 Get A/D filter: -9.255963e+061 result=40 15:44:00 Get A/D value=-858993460 result=40 15:44:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:44:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:44:00 Parameters OK 15:44:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:44:00 Set A/D data flow result=40 15:44:00 Set A/D channel type result=40 15:44:00 Set A/D encoding result=40 15:44:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:44:00 Set channel filter=0.000000e+000 result=40 15:44:00 Config A/D Result=40 15:44:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:44:00 Get A/D filter: -9.255963e+061 result=40 15:44:00 Get A/D value=-858993460 result=40 15:44:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:44:00 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:44:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:44:00 Aux= 15:44:00 Message to Camera, serial 69501 queued 15:44:36 Received message from Master: op=PointingHead serial=69513 15:44:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:44:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:44:36 Point started: ret=0 15:44:36 point_skyscan result=0 15:44:37 Check angles 15:44:37 SkyScan query 15:44:38 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.345<-23423 Statuses=0009 0009 15:44:38 Msec=0 True Az=113.01 Ze=-171.345 Az status=0009 Ze status=0009 15:44:38 Check angles 15:44:38 SkyScan query 15:44:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:44:38 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:44:38 Message to Master queued w/err=0: serial=69513 error=0 15:44:43 Received message from Master: op=Filter serial=69514 15:44:43 Color wheel filter change from 0 to 0 15:44:43 FLIGetFilterPos err=0 currentPosition=0 15:44:43 FLIGetStepsRemaining err=0 RemainingSteps=0 15:44:43 Filter is already there-color wheel unchanged 15:44:44 Received message from Master: op=Shutter serial=69515 15:44:44 Shutter LASER open 15:44:44 Received message from Camera: op=State serial=69517 15:44:44 GetSingleValue result=40 Value=cccccccc 15:44:44 SkyScan query 15:44:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:44:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:44:44 Parameters OK 15:44:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:44:44 Set A/D data flow result=40 15:44:44 Set A/D channel type result=40 15:44:44 Set A/D encoding result=40 15:44:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:44:44 Set channel filter=0.000000e+000 result=40 15:44:44 Config A/D Result=40 15:44:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:44:44 Get A/D filter: -9.255963e+061 result=40 15:44:44 Get A/D value=-858993460 result=40 15:44:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:44:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:44:44 Parameters OK 15:44:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:44:44 Set A/D data flow result=40 15:44:44 Set A/D channel type result=40 15:44:44 Set A/D encoding result=40 15:44:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:44:44 Set channel filter=0.000000e+000 result=40 15:44:44 Config A/D Result=40 15:44:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:44:44 Get A/D filter: -9.255963e+061 result=40 15:44:44 Get A/D value=-858993460 result=40 15:44:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:44:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:44:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:44:44 Aux= 15:44:44 Message to Camera, serial 69517 queued 15:44:53 Received message from Master: op=Shutter serial=69527 15:44:53 Shutter LASER close 15:44:53 Received message from Master: op=PointingHead serial=69531 15:44:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:44:53 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:44:54 Point started: ret=0 15:44:54 point_skyscan result=0 15:44:54 Check angles 15:44:54 SkyScan query 15:44:55 SkyScan query done: ret=0 az=136.125<-9075 ze=-143.16<-21544 Statuses=0009 0009 15:44:55 Msec=0 True Az=136.125 Ze=-143.16 Az status=0009 Ze status=0009 15:44:55 Check angles 15:44:55 SkyScan query 15:44:56 SkyScan query done: ret=0 az=153.99<-10266 ze=-121.77<-20118 Statuses=0009 0009 15:44:56 Msec=750 True Az=153.99 Ze=-121.77 Az status=0009 Ze status=0009 15:44:56 Check angles 15:44:56 SkyScan query 15:44:57 SkyScan query done: ret=0 az=171.435<-11429 ze=-100.8<-18720 Statuses=0009 0009 15:44:57 Msec=1500 True Az=171.435 Ze=-100.8 Az status=0009 Ze status=0009 15:44:57 Check angles 15:44:57 SkyScan query 15:44:57 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.905<-17327 Statuses=0008 0009 15:44:57 Msec=2250 True Az=176.025 Ze=-79.905 Az status=0008 Ze status=0009 15:44:57 Check angles 15:44:57 SkyScan query 15:44:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.905<-15927 Statuses=0008 0009 15:44:58 Msec=3000 True Az=175.995 Ze=-58.905 Az status=0008 Ze status=0009 15:44:58 Check angles 15:44:58 SkyScan query 15:44:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:44:59 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:44:59 Message to Master queued w/err=0: serial=69531 error=0 15:45:04 Received message from Master: op=Filter serial=69532 15:45:04 Color wheel filter change from 0 to 0 15:45:04 FLIGetFilterPos err=0 currentPosition=0 15:45:04 FLIGetStepsRemaining err=0 RemainingSteps=0 15:45:04 Filter is already there-color wheel unchanged 15:45:04 Received message from Master: op=Shutter serial=69533 15:45:04 Shutter LASER close 15:45:04 Received message from Camera: op=State serial=69535 15:45:04 GetSingleValue result=40 Value=cccccccc 15:45:04 SkyScan query 15:45:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:45:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:05 Parameters OK 15:45:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:05 Set A/D data flow result=40 15:45:05 Set A/D channel type result=40 15:45:05 Set A/D encoding result=40 15:45:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:05 Set channel filter=0.000000e+000 result=40 15:45:05 Config A/D Result=40 15:45:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:05 Get A/D filter: -9.255963e+061 result=40 15:45:05 Get A/D value=-858993460 result=40 15:45:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:05 Parameters OK 15:45:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:05 Set A/D data flow result=40 15:45:05 Set A/D channel type result=40 15:45:05 Set A/D encoding result=40 15:45:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:05 Set channel filter=0.000000e+000 result=40 15:45:05 Config A/D Result=40 15:45:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:05 Get A/D filter: -9.255963e+061 result=40 15:45:05 Get A/D value=-858993460 result=40 15:45:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:45:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:45:05 Aux= 15:45:05 Message to Camera, serial 69535 queued 15:45:29 Received message from Master: op=Identify serial=69536 15:45:42 Received message from Master: op=PointingHead serial=69551 15:45:42 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:45:42 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:45:42 Point started: ret=0 15:45:42 point_skyscan result=0 15:45:43 Check angles 15:45:43 SkyScan query 15:45:43 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.825<-13455 Statuses=0009 0009 15:45:43 Msec=0 True Az=152.985 Ze=-21.825 Az status=0009 Ze status=0009 15:45:43 Check angles 15:45:43 SkyScan query 15:45:44 SkyScan query done: ret=0 az=135.255<-9017 ze=-0.405<-12027 Statuses=0009 0009 15:45:44 Msec=750 True Az=135.255 Ze=-0.405 Az status=0009 Ze status=0009 15:45:44 Check angles [UTC 2018-12-11 15:45:44] 15:45:44 SkyScan query 15:45:45 SkyScan query done: ret=0 az=116.25<-7750 ze=22.275<-10515 Statuses=0009 0009 15:45:45 Msec=1500 True Az=116.25 Ze=22.275 Az status=0009 Ze status=0009 15:45:45 Check angles 15:45:45 SkyScan query 15:45:45 SkyScan query done: ret=0 az=100.17<-6678 ze=41.505<-9233 Statuses=0009 0009 15:45:45 Msec=2250 True Az=100.17 Ze=41.505 Az status=0009 Ze status=0009 15:45:46 Check angles 15:45:46 SkyScan query 15:45:46 SkyScan query done: ret=0 az=86.055<-5737 ze=51.54<-8564 Statuses=0009 0008 15:45:46 Msec=3000 True Az=86.055 Ze=51.54 Az status=0009 Ze status=0008 15:45:46 Check angles 15:45:46 SkyScan query 15:45:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:45:47 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:45:47 Message to Master queued w/err=0: serial=69551 error=0 15:45:52 Received message from Master: op=Filter serial=69552 15:45:52 Color wheel filter change from 0 to 0 15:45:52 FLIGetFilterPos err=0 currentPosition=0 15:45:52 FLIGetStepsRemaining err=0 RemainingSteps=0 15:45:52 Filter is already there-color wheel unchanged 15:45:52 Received message from Master: op=Shutter serial=69553 15:45:52 Shutter LASER close 15:45:52 Received message from Camera: op=State serial=69555 15:45:52 GetSingleValue result=40 Value=cccccccc 15:45:52 SkyScan query 15:45:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:45:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:53 Parameters OK 15:45:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:53 Set A/D data flow result=40 15:45:53 Set A/D channel type result=40 15:45:53 Set A/D encoding result=40 15:45:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:53 Set channel filter=0.000000e+000 result=40 15:45:53 Config A/D Result=40 15:45:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:53 Get A/D filter: -9.255963e+061 result=40 15:45:53 Get A/D value=-858993460 result=40 15:45:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:53 Parameters OK 15:45:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:53 Set A/D data flow result=40 15:45:53 Set A/D channel type result=40 15:45:53 Set A/D encoding result=40 15:45:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:53 Set channel filter=0.000000e+000 result=40 15:45:53 Config A/D Result=40 15:45:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:53 Get A/D filter: -9.255963e+061 result=40 15:45:53 Get A/D value=-858993460 result=40 15:45:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:45:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:45:53 Aux= 15:45:53 Message to Camera, serial 69555 queued 15:46:30 Received message from Master: op=PointingHead serial=69568 15:46:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:46:30 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:46:30 Point started: ret=0 15:46:30 point_skyscan result=0 15:46:31 Check angles 15:46:31 SkyScan query 15:46:31 SkyScan query done: ret=0 az=108.795<-7253 ze=38.49<-9434 Statuses=0009 0008 15:46:31 Msec=0 True Az=108.795 Ze=38.49 Az status=0009 Ze status=0008 15:46:31 Check angles 15:46:31 SkyScan query 15:46:32 SkyScan query done: ret=0 az=126.36<-8424 ze=38.49<-9434 Statuses=0009 0008 15:46:32 Msec=750 True Az=126.36 Ze=38.49 Az status=0009 Ze status=0008 15:46:32 Check angles 15:46:32 SkyScan query 15:46:33 SkyScan query done: ret=0 az=144.15<-9610 ze=38.505<-9433 Statuses=0009 0008 15:46:33 Msec=1500 True Az=144.15 Ze=38.505 Az status=0009 Ze status=0008 15:46:33 Check angles 15:46:33 SkyScan query 15:46:34 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 15:46:34 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 15:46:34 Check angles 15:46:34 SkyScan query 15:46:34 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 15:46:34 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 15:46:34 Check angles 15:46:34 SkyScan query 15:46:35 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:46:35 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:46:35 Message to Master queued w/err=0: serial=69568 error=0 15:46:40 Received message from Master: op=Filter serial=69569 15:46:40 Color wheel filter change from 0 to 0 15:46:40 FLIGetFilterPos err=0 currentPosition=0 15:46:40 FLIGetStepsRemaining err=0 RemainingSteps=0 15:46:40 Filter is already there-color wheel unchanged 15:46:40 Received message from Master: op=Shutter serial=69570 15:46:40 Shutter LASER close 15:46:40 Received message from Camera: op=State serial=69572 15:46:40 GetSingleValue result=40 Value=cccccccc 15:46:40 SkyScan query 15:46:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:46:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:46:41 Parameters OK 15:46:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:46:41 Set A/D data flow result=40 15:46:41 Set A/D channel type result=40 15:46:41 Set A/D encoding result=40 15:46:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:46:41 Set channel filter=0.000000e+000 result=40 15:46:41 Config A/D Result=40 15:46:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:46:41 Get A/D filter: -9.255963e+061 result=40 15:46:41 Get A/D value=-858993460 result=40 15:46:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:46:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:46:41 Parameters OK 15:46:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:46:41 Set A/D data flow result=40 15:46:41 Set A/D channel type result=40 15:46:41 Set A/D encoding result=40 15:46:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:46:41 Set channel filter=0.000000e+000 result=40 15:46:41 Config A/D Result=40 15:46:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:46:41 Get A/D filter: -9.255963e+061 result=40 15:46:41 Get A/D value=-858993460 result=40 15:46:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:46:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:46:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:46:41 Aux= 15:46:41 Message to Camera, serial 69572 queued 15:47:18 Received message from Master: op=PointingHead serial=69585 15:47:18 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:47:18 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:47:18 Point started: ret=0 15:47:18 point_skyscan result=0 15:47:19 Check angles 15:47:19 SkyScan query 15:47:19 SkyScan query done: ret=0 az=152.985<-10199 ze=8.835<-11411 Statuses=0009 0009 15:47:19 Msec=0 True Az=152.985 Ze=8.835 Az status=0009 Ze status=0009 15:47:20 Check angles 15:47:20 SkyScan query 15:47:20 SkyScan query done: ret=0 az=135.72<-9048 ze=-12.15<-12810 Statuses=0009 0009 15:47:20 Msec=750 True Az=135.72 Ze=-12.15 Az status=0009 Ze status=0009 15:47:20 Check angles 15:47:20 SkyScan query 15:47:21 SkyScan query done: ret=0 az=118.08<-7872 ze=-33.06<-14204 Statuses=0009 0009 15:47:21 Msec=1500 True Az=118.08 Ze=-33.06 Az status=0009 Ze status=0009 15:47:21 Check angles 15:47:21 SkyScan query 15:47:22 SkyScan query done: ret=0 az=100.635<-6709 ze=-51.51<-15434 Statuses=0009 0009 15:47:22 Msec=2250 True Az=100.635 Ze=-51.51 Az status=0009 Ze status=0009 15:47:22 Check angles 15:47:22 SkyScan query 15:47:22 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 15:47:22 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 15:47:23 Check angles 15:47:23 SkyScan query 15:47:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:47:23 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:47:23 Message to Master queued w/err=0: serial=69585 error=0 15:47:28 Received message from Master: op=Filter serial=69586 15:47:28 Color wheel filter change from 0 to 0 15:47:28 FLIGetFilterPos err=0 currentPosition=0 15:47:28 FLIGetStepsRemaining err=0 RemainingSteps=0 15:47:28 Filter is already there-color wheel unchanged 15:47:28 Received message from Master: op=Shutter serial=69587 15:47:28 Shutter LASER close 15:47:28 Received message from Camera: op=State serial=69589 15:47:28 GetSingleValue result=40 Value=cccccccc 15:47:28 SkyScan query 15:47:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:47:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:47:29 Parameters OK 15:47:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:47:29 Set A/D data flow result=40 15:47:29 Set A/D channel type result=40 15:47:29 Set A/D encoding result=40 15:47:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:47:29 Set channel filter=0.000000e+000 result=40 15:47:29 Config A/D Result=40 15:47:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:47:29 Get A/D filter: -9.255963e+061 result=40 15:47:29 Get A/D value=-858993460 result=40 15:47:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:47:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:47:29 Parameters OK 15:47:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:47:29 Set A/D data flow result=40 15:47:29 Set A/D channel type result=40 15:47:29 Set A/D encoding result=40 15:47:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:47:29 Set channel filter=0.000000e+000 result=40 15:47:29 Config A/D Result=40 15:47:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:47:29 Get A/D filter: -9.255963e+061 result=40 15:47:29 Get A/D value=-858993460 result=40 15:47:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:47:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:47:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:47:29 Aux= 15:47:29 Message to Camera, serial 69589 queued 15:48:06 Received message from Master: op=PointingHead serial=69602 15:48:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:48:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:48:06 Point started: ret=0 15:48:06 point_skyscan result=0 15:48:07 Check angles 15:48:07 SkyScan query 15:48:07 SkyScan query done: ret=0 az=108.765<-7251 ze=-81.03<-17402 Statuses=0009 0009 15:48:07 Msec=0 True Az=108.765 Ze=-81.03 Az status=0009 Ze status=0009 15:48:08 Check angles 15:48:08 SkyScan query 15:48:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.97<-18798 Statuses=0008 0009 15:48:08 Msec=750 True Az=112.995 Ze=-101.97 Az status=0008 Ze status=0009 15:48:08 Check angles 15:48:08 SkyScan query 15:48:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.94<-20196 Statuses=0008 0009 15:48:09 Msec=1500 True Az=112.995 Ze=-122.94 Az status=0008 Ze status=0009 15:48:09 Check angles 15:48:09 SkyScan query 15:48:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.925<-21595 Statuses=0008 0009 15:48:10 Msec=2250 True Az=112.995 Ze=-143.925 Az status=0008 Ze status=0009 15:48:10 Check angles 15:48:10 SkyScan query 15:48:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.865<-22991 Statuses=0008 0009 15:48:10 Msec=3000 True Az=112.995 Ze=-164.865 Az status=0008 Ze status=0009 15:48:11 Check angles 15:48:11 SkyScan query 15:48:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:48:11 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:48:11 Message to Master queued w/err=0: serial=69602 error=0 15:48:16 Received message from Master: op=Filter serial=69603 15:48:16 Color wheel filter change from 0 to 0 15:48:16 FLIGetFilterPos err=0 currentPosition=0 15:48:16 FLIGetStepsRemaining err=0 RemainingSteps=0 15:48:16 Filter is already there-color wheel unchanged 15:48:16 Received message from Master: op=Shutter serial=69604 15:48:16 Shutter LASER open 15:48:17 Received message from Camera: op=State serial=69606 15:48:17 GetSingleValue result=40 Value=cccccccc 15:48:17 SkyScan query 15:48:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:48:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:48:17 Parameters OK 15:48:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:48:17 Set A/D data flow result=40 15:48:17 Set A/D channel type result=40 15:48:17 Set A/D encoding result=40 15:48:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:48:17 Set channel filter=0.000000e+000 result=40 15:48:17 Config A/D Result=40 15:48:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:48:17 Get A/D filter: -9.255963e+061 result=40 15:48:17 Get A/D value=-858993460 result=40 15:48:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:48:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:48:17 Parameters OK 15:48:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:48:17 Set A/D data flow result=40 15:48:17 Set A/D channel type result=40 15:48:17 Set A/D encoding result=40 15:48:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:48:17 Set channel filter=0.000000e+000 result=40 15:48:17 Config A/D Result=40 15:48:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:48:17 Get A/D filter: -9.255963e+061 result=40 15:48:17 Get A/D value=-858993460 result=40 15:48:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:48:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:48:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:48:17 Aux= 15:48:17 Message to Camera, serial 69606 queued 15:48:26 Received message from Master: op=Shutter serial=69616 15:48:26 Shutter LASER close 15:48:26 Received message from Master: op=PointingHead serial=69620 15:48:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:48:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:48:26 Point started: ret=0 15:48:26 point_skyscan result=0 15:48:27 Check angles 15:48:27 SkyScan query 15:48:28 SkyScan query done: ret=0 az=89.895<-5993 ze=157.275<-1515 Statuses=0009 0009 15:48:28 Msec=0 True Az=89.895 Ze=157.275 Az status=0009 Ze status=0009 15:48:28 Check angles 15:48:28 SkyScan query 15:48:29 SkyScan query done: ret=0 az=72.315<-4821 ze=136.29<-2914 Statuses=0009 0009 15:48:29 Msec=750 True Az=72.315 Ze=136.29 Az status=0009 Ze status=0009 15:48:29 Check angles 15:48:29 SkyScan query 15:48:29 SkyScan query done: ret=0 az=55.02<-3668 ze=115.365<-4309 Statuses=0009 0009 15:48:29 Msec=1500 True Az=55.02 Ze=115.365 Az status=0009 Ze status=0009 15:48:29 Check angles 15:48:29 SkyScan query 15:48:30 SkyScan query done: ret=0 az=40.86<-2724 ze=94.395<-5707 Statuses=0009 0009 15:48:30 Msec=2250 True Az=40.86 Ze=94.395 Az status=0009 Ze status=0009 15:48:30 Check angles 15:48:30 SkyScan query 15:48:31 SkyScan query done: ret=0 az=40.995<-2733 ze=73.455<-7103 Statuses=0008 0009 15:48:31 Msec=3000 True Az=40.995 Ze=73.455 Az status=0008 Ze status=0009 15:48:31 Check angles 15:48:31 SkyScan query 15:48:32 SkyScan query done: ret=0 az=40.995<-2733 ze=52.875<-8475 Statuses=0008 0009 15:48:32 Msec=3750 True Az=40.995 Ze=52.875 Az status=0008 Ze status=0009 15:48:32 Check angles 15:48:32 SkyScan query 15:48:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:48:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:48:32 Message to Master queued w/err=0: serial=69620 error=0 15:48:37 Received message from Master: op=Filter serial=69621 15:48:37 Color wheel filter change from 0 to 0 15:48:37 FLIGetFilterPos err=0 currentPosition=0 15:48:37 FLIGetStepsRemaining err=0 RemainingSteps=0 15:48:37 Filter is already there-color wheel unchanged 15:48:37 Received message from Master: op=Shutter serial=69622 15:48:37 Shutter LASER close 15:48:38 Received message from Camera: op=State serial=69624 15:48:38 GetSingleValue result=40 Value=cccccccc 15:48:38 SkyScan query 15:48:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:48:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:48:38 Parameters OK 15:48:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:48:38 Set A/D data flow result=40 15:48:38 Set A/D channel type result=40 15:48:38 Set A/D encoding result=40 15:48:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:48:38 Set channel filter=0.000000e+000 result=40 15:48:38 Config A/D Result=40 15:48:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:48:38 Get A/D filter: -9.255963e+061 result=40 15:48:38 Get A/D value=-858993460 result=40 15:48:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:48:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:48:38 Parameters OK 15:48:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:48:38 Set A/D data flow result=40 15:48:38 Set A/D channel type result=40 15:48:38 Set A/D encoding result=40 15:48:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:48:38 Set channel filter=0.000000e+000 result=40 15:48:38 Config A/D Result=40 15:48:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:48:38 Get A/D filter: -9.255963e+061 result=40 15:48:38 Get A/D value=-858993460 result=40 15:48:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:48:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:48:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:48:38 Aux= 15:48:38 Message to Camera, serial 69624 queued 15:49:15 Received message from Master: op=PointingHead serial=69637 15:49:15 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:49:15 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:49:15 Point started: ret=0 15:49:15 point_skyscan result=0 15:49:16 Check angles 15:49:16 SkyScan query 15:49:17 SkyScan query done: ret=0 az=64.26<-4284 ze=66.54<-7564 Statuses=0009 0008 15:49:17 Msec=0 True Az=64.26 Ze=66.54 Az status=0009 Ze status=0008 15:49:17 Check angles 15:49:17 SkyScan query 15:49:17 SkyScan query done: ret=0 az=81.72<-5448 ze=66.51<-7566 Statuses=0009 0008 15:49:17 Msec=750 True Az=81.72 Ze=66.51 Az status=0009 Ze status=0008 15:49:18 Check angles 15:49:18 SkyScan query 15:49:18 SkyScan query done: ret=0 az=99.195<-6613 ze=66.495<-7567 Statuses=0009 0008 15:49:18 Msec=1500 True Az=99.195 Ze=66.495 Az status=0009 Ze status=0008 15:49:18 Check angles 15:49:18 SkyScan query 15:49:19 SkyScan query done: ret=0 az=116.76<-7784 ze=66.495<-7567 Statuses=0009 0008 15:49:19 Msec=2250 True Az=116.76 Ze=66.495 Az status=0009 Ze status=0008 15:49:19 Check angles 15:49:19 SkyScan query 15:49:20 SkyScan query done: ret=0 az=134.265<-8951 ze=66.495<-7567 Statuses=0009 0008 15:49:20 Msec=3000 True Az=134.265 Ze=66.495 Az status=0009 Ze status=0008 15:49:20 Check angles 15:49:20 SkyScan query 15:49:20 SkyScan query done: ret=0 az=151.725<-10115 ze=66.495<-7567 Statuses=0009 0008 15:49:20 Msec=3750 True Az=151.725 Ze=66.495 Az status=0009 Ze status=0008 15:49:21 Check angles 15:49:21 SkyScan query 15:49:21 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:49:21 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 15:49:21 Message to Master queued w/err=0: serial=69637 error=0 15:49:26 Received message from Master: op=Filter serial=69638 15:49:26 Color wheel filter change from 0 to 0 15:49:26 FLIGetFilterPos err=0 currentPosition=0 15:49:26 FLIGetStepsRemaining err=0 RemainingSteps=0 15:49:26 Filter is already there-color wheel unchanged 15:49:26 Received message from Master: op=Shutter serial=69639 15:49:26 Shutter LASER close 15:49:26 Received message from Camera: op=State serial=69641 15:49:26 GetSingleValue result=40 Value=cccccccc 15:49:26 SkyScan query 15:49:27 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:49:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:49:27 Parameters OK 15:49:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:49:27 Set A/D data flow result=40 15:49:27 Set A/D channel type result=40 15:49:27 Set A/D encoding result=40 15:49:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:49:27 Set channel filter=0.000000e+000 result=40 15:49:27 Config A/D Result=40 15:49:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:49:27 Get A/D filter: -9.255963e+061 result=40 15:49:27 Get A/D value=-858993460 result=40 15:49:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:49:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:49:27 Parameters OK 15:49:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:49:27 Set A/D data flow result=40 15:49:27 Set A/D channel type result=40 15:49:27 Set A/D encoding result=40 15:49:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:49:27 Set channel filter=0.000000e+000 result=40 15:49:27 Config A/D Result=40 15:49:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:49:27 Get A/D filter: -9.255963e+061 result=40 15:49:27 Get A/D value=-858993460 result=40 15:49:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:49:27 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:49:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:49:27 Aux= 15:49:27 Message to Camera, serial 69641 queued 15:50:04 Received message from Master: op=PointingHead serial=69654 15:50:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:50:04 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:50:04 Point started: ret=0 15:50:04 point_skyscan result=0 15:50:05 Check angles 15:50:05 SkyScan query 15:50:06 SkyScan query done: ret=0 az=134.565<-8971 ze=36.39<-9574 Statuses=0009 0009 15:50:06 Msec=0 True Az=134.565 Ze=36.39 Az status=0009 Ze status=0009 15:50:06 Check angles 15:50:06 SkyScan query 15:50:06 SkyScan query done: ret=0 az=117.21<-7814 ze=15.465<-10969 Statuses=0009 0009 15:50:06 Msec=750 True Az=117.21 Ze=15.465 Az status=0009 Ze status=0009 15:50:06 Check angles 15:50:06 SkyScan query 15:50:07 SkyScan query done: ret=0 az=99.795<-6653 ze=-5.535<-12369 Statuses=0009 0009 15:50:07 Msec=1500 True Az=99.795 Ze=-5.535 Az status=0009 Ze status=0009 15:50:07 Check angles 15:50:07 SkyScan query 15:50:08 SkyScan query done: ret=0 az=82.35<-5490 ze=-26.46<-13764 Statuses=0009 0009 15:50:08 Msec=2250 True Az=82.35 Ze=-26.46 Az status=0009 Ze status=0009 15:50:08 Check angles 15:50:08 SkyScan query 15:50:09 SkyScan query done: ret=0 az=64.74<-4316 ze=-38.565<-14571 Statuses=0009 0008 15:50:09 Msec=3000 True Az=64.74 Ze=-38.565 Az status=0009 Ze status=0008 15:50:09 Check angles 15:50:09 SkyScan query 15:50:09 SkyScan query done: ret=0 az=47.31<-3154 ze=-38.535<-14569 Statuses=0009 0008 15:50:09 Msec=3750 True Az=47.31 Ze=-38.535 Az status=0009 Ze status=0008 15:50:09 Check angles 15:50:09 SkyScan query 15:50:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:50:10 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:50:10 Message to Master queued w/err=0: serial=69654 error=0 15:50:15 Received message from Master: op=Filter serial=69655 15:50:15 Color wheel filter change from 0 to 0 15:50:15 FLIGetFilterPos err=0 currentPosition=0 15:50:15 FLIGetStepsRemaining err=0 RemainingSteps=0 15:50:15 Filter is already there-color wheel unchanged 15:50:15 Received message from Master: op=Shutter serial=69656 15:50:15 Shutter LASER close 15:50:15 Received message from Camera: op=State serial=69658 15:50:15 GetSingleValue result=40 Value=cccccccc 15:50:15 SkyScan query 15:50:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:50:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:50:16 Parameters OK 15:50:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:50:16 Set A/D data flow result=40 15:50:16 Set A/D channel type result=40 15:50:16 Set A/D encoding result=40 15:50:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:50:16 Set channel filter=0.000000e+000 result=40 15:50:16 Config A/D Result=40 15:50:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:50:16 Get A/D filter: -9.255963e+061 result=40 15:50:16 Get A/D value=-858993460 result=40 15:50:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:50:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:50:16 Parameters OK 15:50:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:50:16 Set A/D data flow result=40 15:50:16 Set A/D channel type result=40 15:50:16 Set A/D encoding result=40 15:50:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:50:16 Set channel filter=0.000000e+000 result=40 15:50:16 Config A/D Result=40 15:50:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:50:16 Get A/D filter: -9.255963e+061 result=40 15:50:16 Get A/D value=-858993460 result=40 15:50:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:50:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:50:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:50:16 Aux= 15:50:16 Message to Camera, serial 69658 queued 15:50:53 Received message from Master: op=PointingHead serial=69671 15:50:53 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:50:53 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:50:53 Point started: ret=0 15:50:53 point_skyscan result=0 15:50:54 Check angles 15:50:54 SkyScan query 15:50:54 SkyScan query done: ret=0 az=63.75<-4250 ze=-67.995<-16533 Statuses=0009 0009 15:50:54 Msec=0 True Az=63.75 Ze=-67.995 Az status=0009 Ze status=0009 15:50:55 Check angles 15:50:55 SkyScan query 15:50:55 SkyScan query done: ret=0 az=81.09<-5406 ze=-88.995<-17933 Statuses=0009 0009 15:50:55 Msec=750 True Az=81.09 Ze=-88.995 Az status=0009 Ze status=0009 15:50:55 Check angles 15:50:55 SkyScan query 15:50:56 SkyScan query done: ret=0 az=98.595<-6573 ze=-109.905<-19327 Statuses=0009 0009 15:50:56 Msec=1500 True Az=98.595 Ze=-109.905 Az status=0009 Ze status=0009 15:50:56 Check angles 15:50:56 SkyScan query 15:50:57 SkyScan query done: ret=0 az=116.25<-7750 ze=-130.89<-20726 Statuses=0009 0009 15:50:57 Msec=2250 True Az=116.25 Ze=-130.89 Az status=0009 Ze status=0009 15:50:57 Check angles 15:50:57 SkyScan query 15:50:57 SkyScan query done: ret=0 az=131.16<-8744 ze=-141.54<-21436 Statuses=0009 0008 15:50:57 Msec=3000 True Az=131.16 Ze=-141.54 Az status=0009 Ze status=0008 15:50:58 Check angles 15:50:58 SkyScan query 15:50:58 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:50:58 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:50:58 Message to Master queued w/err=0: serial=69671 error=0 15:51:03 Received message from Master: op=Filter serial=69672 15:51:03 Color wheel filter change from 0 to 0 15:51:03 FLIGetFilterPos err=0 currentPosition=0 15:51:03 FLIGetStepsRemaining err=0 RemainingSteps=0 15:51:03 Filter is already there-color wheel unchanged 15:51:03 Received message from Master: op=Shutter serial=69673 15:51:03 Shutter LASER close 15:51:03 Received message from Camera: op=State serial=69675 15:51:03 GetSingleValue result=40 Value=cccccccc 15:51:03 SkyScan query 15:51:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:51:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:51:04 Parameters OK 15:51:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:51:04 Set A/D data flow result=40 15:51:04 Set A/D channel type result=40 15:51:04 Set A/D encoding result=40 15:51:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:51:04 Set channel filter=0.000000e+000 result=40 15:51:04 Config A/D Result=40 15:51:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:51:04 Get A/D filter: -9.255963e+061 result=40 15:51:04 Get A/D value=-858993460 result=40 15:51:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:51:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:51:04 Parameters OK 15:51:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:51:04 Set A/D data flow result=40 15:51:04 Set A/D channel type result=40 15:51:04 Set A/D encoding result=40 15:51:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:51:04 Set channel filter=0.000000e+000 result=40 15:51:04 Config A/D Result=40 15:51:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:51:04 Get A/D filter: -9.255963e+061 result=40 15:51:04 Get A/D value=-858993460 result=40 15:51:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:51:04 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:51:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:51:04 Aux= 15:51:04 Message to Camera, serial 69675 queued 15:51:41 Received message from Master: op=PointingHead serial=69688 15:51:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:51:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:51:41 Point started: ret=0 15:51:41 point_skyscan result=0 15:51:42 Check angles 15:51:42 SkyScan query 15:51:42 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.24<-23416 Statuses=0009 0009 15:51:42 Msec=0 True Az=113.01 Ze=-171.24 Az status=0009 Ze status=0009 15:51:43 Check angles 15:51:43 SkyScan query 15:51:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:51:43 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:51:43 Message to Master queued w/err=0: serial=69688 error=0 15:51:48 Received message from Master: op=Filter serial=69689 15:51:48 Color wheel filter change from 0 to 0 15:51:48 FLIGetFilterPos err=0 currentPosition=0 15:51:48 FLIGetStepsRemaining err=0 RemainingSteps=0 15:51:48 Filter is already there-color wheel unchanged 15:51:48 Received message from Master: op=Shutter serial=69690 15:51:48 Shutter LASER open 15:51:48 Received message from Camera: op=State serial=69692 15:51:48 GetSingleValue result=40 Value=cccccccc 15:51:48 SkyScan query 15:51:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:51:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:51:49 Parameters OK 15:51:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:51:49 Set A/D data flow result=40 15:51:49 Set A/D channel type result=40 15:51:49 Set A/D encoding result=40 15:51:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:51:49 Set channel filter=0.000000e+000 result=40 15:51:49 Config A/D Result=40 15:51:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:51:49 Get A/D filter: -9.255963e+061 result=40 15:51:49 Get A/D value=-858993460 result=40 15:51:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:51:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:51:49 Parameters OK 15:51:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:51:49 Set A/D data flow result=40 15:51:49 Set A/D channel type result=40 15:51:49 Set A/D encoding result=40 15:51:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:51:49 Set channel filter=0.000000e+000 result=40 15:51:49 Config A/D Result=40 15:51:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:51:49 Get A/D filter: -9.255963e+061 result=40 15:51:49 Get A/D value=-858993460 result=40 15:51:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:51:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:51:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:51:49 Aux= 15:51:49 Message to Camera, serial 69692 queued 15:51:57 Received message from Master: op=Shutter serial=69702 15:51:57 Shutter LASER close 15:51:58 Received message from Master: op=PointingHead serial=69706 15:51:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:51:58 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:51:58 Point started: ret=0 15:51:58 point_skyscan result=0 15:51:59 Check angles 15:51:59 SkyScan query 15:52:00 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.355<-21557 Statuses=0009 0009 15:52:00 Msec=0 True Az=135.93 Ze=-143.355 Az status=0009 Ze status=0009 15:52:00 Check angles 15:52:00 SkyScan query 15:52:01 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.935<-20129 Statuses=0009 0009 15:52:01 Msec=750 True Az=153.75 Ze=-121.935 Az status=0009 Ze status=0009 15:52:01 Check angles 15:52:01 SkyScan query 15:52:01 SkyScan query done: ret=0 az=171.255<-11417 ze=-101.01<-18734 Statuses=0009 0009 15:52:01 Msec=1500 True Az=171.255 Ze=-101.01 Az status=0009 Ze status=0009 15:52:01 Check angles 15:52:01 SkyScan query 15:52:02 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.085<-17339 Statuses=0008 0009 15:52:02 Msec=2250 True Az=176.025 Ze=-80.085 Az status=0008 Ze status=0009 15:52:02 Check angles 15:52:02 SkyScan query 15:52:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.1<-15940 Statuses=0008 0009 15:52:03 Msec=3000 True Az=175.995 Ze=-59.1 Az status=0008 Ze status=0009 15:52:03 Check angles 15:52:03 SkyScan query 15:52:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 15:52:04 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 15:52:04 Message to Master queued w/err=0: serial=69706 error=0 15:52:09 Received message from Master: op=Filter serial=69707 15:52:09 Color wheel filter change from 0 to 0 15:52:09 FLIGetFilterPos err=0 currentPosition=0 15:52:09 FLIGetStepsRemaining err=0 RemainingSteps=0 15:52:09 Filter is already there-color wheel unchanged 15:52:09 Received message from Master: op=Shutter serial=69708 15:52:09 Shutter LASER close 15:52:09 Received message from Camera: op=State serial=69710 15:52:09 GetSingleValue result=40 Value=cccccccc 15:52:09 SkyScan query 15:52:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:52:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:52:09 Parameters OK 15:52:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:52:09 Set A/D data flow result=40 15:52:09 Set A/D channel type result=40 15:52:09 Set A/D encoding result=40 15:52:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:52:09 Set channel filter=0.000000e+000 result=40 15:52:09 Config A/D Result=40 15:52:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:52:09 Get A/D filter: -9.255963e+061 result=40 15:52:09 Get A/D value=-858993460 result=40 15:52:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:52:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:52:09 Parameters OK 15:52:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:52:09 Set A/D data flow result=40 15:52:09 Set A/D channel type result=40 15:52:09 Set A/D encoding result=40 15:52:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:52:09 Set channel filter=0.000000e+000 result=40 15:52:09 Config A/D Result=40 15:52:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:52:09 Get A/D filter: -9.255963e+061 result=40 15:52:09 Get A/D value=-858993460 result=40 15:52:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:52:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:52:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:52:09 Aux= 15:52:09 Message to Camera, serial 69710 queued 15:52:46 Received message from Master: op=PointingHead serial=69723 15:52:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:52:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:52:47 Point started: ret=0 15:52:47 point_skyscan result=0 15:52:47 Check angles 15:52:47 SkyScan query 15:52:48 SkyScan query done: ret=0 az=153<-10200 ze=-21.795<-13453 Statuses=0009 0009 15:52:48 Msec=0 True Az=153 Ze=-21.795 Az status=0009 Ze status=0009 15:52:48 Check angles 15:52:48 SkyScan query 15:52:49 SkyScan query done: ret=0 az=135.525<-9035 ze=-0.795<-12053 Statuses=0009 0009 15:52:49 Msec=750 True Az=135.525 Ze=-0.795 Az status=0009 Ze status=0009 15:52:49 Check angles 15:52:49 SkyScan query 15:52:49 SkyScan query done: ret=0 az=117.975<-7865 ze=20.13<-10658 Statuses=0009 0009 15:52:49 Msec=1500 True Az=117.975 Ze=20.13 Az status=0009 Ze status=0009 15:52:50 Check angles 15:52:50 SkyScan query 15:52:50 SkyScan query done: ret=0 az=100.485<-6699 ze=41.1<-9260 Statuses=0009 0009 15:52:50 Msec=2250 True Az=100.485 Ze=41.1 Az status=0009 Ze status=0009 15:52:50 Check angles 15:52:50 SkyScan query 15:52:51 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 15:52:51 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 15:52:51 Check angles 15:52:51 SkyScan query 15:52:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:52:52 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:52:52 Message to Master queued w/err=0: serial=69723 error=0 15:52:57 Received message from Master: op=Filter serial=69724 15:52:57 Color wheel filter change from 0 to 0 15:52:57 FLIGetFilterPos err=0 currentPosition=0 15:52:57 FLIGetStepsRemaining err=0 RemainingSteps=0 15:52:57 Filter is already there-color wheel unchanged 15:52:57 Received message from Master: op=Shutter serial=69725 15:52:57 Shutter LASER close 15:52:57 Received message from Camera: op=State serial=69727 15:52:57 GetSingleValue result=40 Value=cccccccc 15:52:57 SkyScan query 15:52:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:52:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:52:57 Parameters OK 15:52:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:52:57 Set A/D data flow result=40 15:52:57 Set A/D channel type result=40 15:52:57 Set A/D encoding result=40 15:52:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:52:57 Set channel filter=0.000000e+000 result=40 15:52:57 Config A/D Result=40 15:52:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:52:57 Get A/D filter: -9.255963e+061 result=40 15:52:57 Get A/D value=-858993460 result=40 15:52:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:52:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:52:57 Parameters OK 15:52:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:52:57 Set A/D data flow result=40 15:52:57 Set A/D channel type result=40 15:52:57 Set A/D encoding result=40 15:52:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:52:57 Set channel filter=0.000000e+000 result=40 15:52:57 Config A/D Result=40 15:52:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:52:57 Get A/D filter: -9.255963e+061 result=40 15:52:57 Get A/D value=-858993460 result=40 15:52:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:52:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:52:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:52:57 Aux= 15:52:57 Message to Camera, serial 69727 queued 15:53:33 Received message from Master: op=PointingHead serial=69739 15:53:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:53:33 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:53:34 Point started: ret=0 15:53:34 point_skyscan result=0 15:53:34 Check angles 15:53:34 SkyScan query 15:53:35 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 15:53:35 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 15:53:35 Check angles 15:53:35 SkyScan query 15:53:36 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 15:53:36 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 15:53:36 Check angles 15:53:36 SkyScan query 15:53:37 SkyScan query done: ret=0 az=144.21<-9614 ze=38.505<-9433 Statuses=0009 0008 15:53:37 Msec=1500 True Az=144.21 Ze=38.505 Az status=0009 Ze status=0008 15:53:37 Check angles 15:53:37 SkyScan query 15:53:37 SkyScan query done: ret=0 az=161.61<-10774 ze=38.505<-9433 Statuses=0009 0008 15:53:37 Msec=2250 True Az=161.61 Ze=38.505 Az status=0009 Ze status=0008 15:53:38 Check angles 15:53:38 SkyScan query 15:53:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 15:53:38 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 15:53:38 Check angles 15:53:38 SkyScan query 15:53:39 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:53:39 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:53:39 Message to Master queued w/err=0: serial=69739 error=0 15:53:44 Received message from Master: op=Filter serial=69740 15:53:44 Color wheel filter change from 0 to 0 15:53:44 FLIGetFilterPos err=0 currentPosition=0 15:53:44 FLIGetStepsRemaining err=0 RemainingSteps=0 15:53:44 Filter is already there-color wheel unchanged 15:53:44 Received message from Master: op=Shutter serial=69741 15:53:44 Shutter LASER close 15:53:44 Received message from Camera: op=State serial=69743 15:53:44 GetSingleValue result=40 Value=cccccccc 15:53:44 SkyScan query 15:53:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:53:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:53:45 Parameters OK 15:53:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:53:45 Set A/D data flow result=40 15:53:45 Set A/D channel type result=40 15:53:45 Set A/D encoding result=40 15:53:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:53:45 Set channel filter=0.000000e+000 result=40 15:53:45 Config A/D Result=40 15:53:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:53:45 Get A/D filter: -9.255963e+061 result=40 15:53:45 Get A/D value=-858993460 result=40 15:53:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:53:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:53:45 Parameters OK 15:53:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:53:45 Set A/D data flow result=40 15:53:45 Set A/D channel type result=40 15:53:45 Set A/D encoding result=40 15:53:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:53:45 Set channel filter=0.000000e+000 result=40 15:53:45 Config A/D Result=40 15:53:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:53:45 Get A/D filter: -9.255963e+061 result=40 15:53:45 Get A/D value=-858993460 result=40 15:53:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:53:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:53:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:53:45 Aux= 15:53:45 Message to Camera, serial 69743 queued 15:54:21 Received message from Master: op=PointingHead serial=69756 15:54:21 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:54:21 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:54:22 Point started: ret=0 15:54:22 point_skyscan result=0 15:54:23 Check angles 15:54:23 SkyScan query 15:54:23 SkyScan query done: ret=0 az=153.225<-10215 ze=8.985<-11401 Statuses=0009 0009 15:54:23 Msec=0 True Az=153.225 Ze=8.985 Az status=0009 Ze status=0009 15:54:23 Check angles 15:54:23 SkyScan query 15:54:24 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.435<-12829 Statuses=0009 0009 15:54:24 Msec=750 True Az=135.42 Ze=-12.435 Az status=0009 Ze status=0009 15:54:24 Check angles 15:54:24 SkyScan query 15:54:25 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.36<-14224 Statuses=0009 0009 15:54:25 Msec=1500 True Az=117.795 Ze=-33.36 Az status=0009 Ze status=0009 15:54:25 Check angles 15:54:25 SkyScan query 15:54:25 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.54<-15436 Statuses=0009 0009 15:54:25 Msec=2250 True Az=100.425 Ze=-51.54 Az status=0009 Ze status=0009 15:54:26 Check angles 15:54:26 SkyScan query 15:54:26 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:54:26 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:54:26 Check angles 15:54:26 SkyScan query 15:54:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:54:27 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:54:27 Message to Master queued w/err=0: serial=69756 error=0 15:54:32 Received message from Master: op=Filter serial=69757 15:54:32 Color wheel filter change from 0 to 0 15:54:32 FLIGetFilterPos err=0 currentPosition=0 15:54:32 FLIGetStepsRemaining err=0 RemainingSteps=0 15:54:32 Filter is already there-color wheel unchanged 15:54:32 Received message from Master: op=Shutter serial=69758 15:54:32 Shutter LASER close 15:54:32 Received message from Camera: op=State serial=69760 15:54:32 GetSingleValue result=40 Value=cccccccc 15:54:32 SkyScan query 15:54:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:54:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:54:33 Parameters OK 15:54:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:54:33 Set A/D data flow result=40 15:54:33 Set A/D channel type result=40 15:54:33 Set A/D encoding result=40 15:54:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:54:33 Set channel filter=0.000000e+000 result=40 15:54:33 Config A/D Result=40 15:54:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:54:33 Get A/D filter: -9.255963e+061 result=40 15:54:33 Get A/D value=-858993460 result=40 15:54:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:54:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:54:33 Parameters OK 15:54:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:54:33 Set A/D data flow result=40 15:54:33 Set A/D channel type result=40 15:54:33 Set A/D encoding result=40 15:54:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:54:33 Set channel filter=0.000000e+000 result=40 15:54:33 Config A/D Result=40 15:54:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:54:33 Get A/D filter: -9.255963e+061 result=40 15:54:33 Get A/D value=-858993460 result=40 15:54:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:54:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:54:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:54:33 Aux= 15:54:33 Message to Camera, serial 69760 queued 15:55:10 Received message from Master: op=PointingHead serial=69773 15:55:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:55:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:55:10 Point started: ret=0 15:55:10 point_skyscan result=0 15:55:11 Check angles 15:55:11 SkyScan query 15:55:11 SkyScan query done: ret=0 az=109.365<-7291 ze=-81.645<-17443 Statuses=0009 0009 15:55:11 Msec=0 True Az=109.365 Ze=-81.645 Az status=0009 Ze status=0009 15:55:11 Check angles 15:55:11 SkyScan query 15:55:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.585<-18839 Statuses=0008 0009 15:55:12 Msec=750 True Az=112.995 Ze=-102.585 Az status=0008 Ze status=0009 15:55:12 Check angles 15:55:12 SkyScan query 15:55:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.555<-20237 Statuses=0008 0009 15:55:13 Msec=1500 True Az=112.995 Ze=-123.555 Az status=0008 Ze status=0009 15:55:13 Check angles 15:55:13 SkyScan query 15:55:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.51<-21634 Statuses=0008 0009 15:55:13 Msec=2250 True Az=112.995 Ze=-144.51 Az status=0008 Ze status=0009 15:55:14 Check angles 15:55:14 SkyScan query 15:55:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.48<-23032 Statuses=0008 0009 15:55:14 Msec=3000 True Az=112.995 Ze=-165.48 Az status=0008 Ze status=0009 15:55:14 Check angles 15:55:14 SkyScan query 15:55:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:55:15 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:55:15 Message to Master queued w/err=0: serial=69773 error=0 15:55:20 Received message from Master: op=Filter serial=69774 15:55:20 Color wheel filter change from 0 to 0 15:55:20 FLIGetFilterPos err=0 currentPosition=0 15:55:20 FLIGetStepsRemaining err=0 RemainingSteps=0 15:55:20 Filter is already there-color wheel unchanged 15:55:20 Received message from Master: op=Shutter serial=69775 15:55:20 Shutter LASER open 15:55:20 Received message from Camera: op=State serial=69777 15:55:20 GetSingleValue result=40 Value=cccccccc 15:55:20 SkyScan query 15:55:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:55:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:55:21 Parameters OK 15:55:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:55:21 Set A/D data flow result=40 15:55:21 Set A/D channel type result=40 15:55:21 Set A/D encoding result=40 15:55:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:55:21 Set channel filter=0.000000e+000 result=40 15:55:21 Config A/D Result=40 15:55:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:55:21 Get A/D filter: -9.255963e+061 result=40 15:55:21 Get A/D value=-858993460 result=40 15:55:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:55:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:55:21 Parameters OK 15:55:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:55:21 Set A/D data flow result=40 15:55:21 Set A/D channel type result=40 15:55:21 Set A/D encoding result=40 15:55:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:55:21 Set channel filter=0.000000e+000 result=40 15:55:21 Config A/D Result=40 15:55:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:55:21 Get A/D filter: -9.255963e+061 result=40 15:55:21 Get A/D value=-858993460 result=40 15:55:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:55:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:55:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:55:21 Aux= 15:55:21 Message to Camera, serial 69777 queued 15:55:29 Received message from Master: op=Shutter serial=69787 15:55:29 Shutter LASER close 15:55:30 Received message from Master: op=PointingHead serial=69791 15:55:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:55:30 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:55:30 Point started: ret=0 15:55:30 point_skyscan result=0 15:55:31 Check angles 15:55:31 SkyScan query 15:55:31 SkyScan query done: ret=0 az=89.895<-5993 ze=157.2<-1520 Statuses=0009 0009 15:55:31 Msec=0 True Az=89.895 Ze=157.2 Az status=0009 Ze status=0009 15:55:32 Check angles 15:55:32 SkyScan query 15:55:32 SkyScan query done: ret=0 az=72<-4800 ze=135.795<-2947 Statuses=0009 0009 15:55:32 Msec=750 True Az=72 Ze=135.795 Az status=0009 Ze status=0009 15:55:32 Check angles 15:55:32 SkyScan query 15:55:33 SkyScan query done: ret=0 az=54.405<-3627 ze=114.36<-4376 Statuses=0009 0009 15:55:33 Msec=1500 True Az=54.405 Ze=114.36 Az status=0009 Ze status=0009 [UTC 2018-12-11 15:55:33] 15:55:33 Check angles 15:55:33 SkyScan query 15:55:34 SkyScan query done: ret=0 az=41.025<-2735 ze=91.71<-5886 Statuses=0008 0009 15:55:34 Msec=2250 True Az=41.025 Ze=91.71 Az status=0008 Ze status=0009 15:55:34 Check angles 15:55:34 SkyScan query 15:55:35 SkyScan query done: ret=0 az=40.995<-2733 ze=72.465<-7169 Statuses=0008 0009 15:55:35 Msec=3000 True Az=40.995 Ze=72.465 Az status=0008 Ze status=0009 15:55:35 Check angles 15:55:35 SkyScan query 15:55:35 SkyScan query done: ret=0 az=40.995<-2733 ze=52.275<-8515 Statuses=0008 0009 15:55:35 Msec=3750 True Az=40.995 Ze=52.275 Az status=0008 Ze status=0009 15:55:35 Check angles 15:55:35 SkyScan query 15:55:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:55:36 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:55:36 Message to Master queued w/err=0: serial=69791 error=0 15:55:41 Received message from Master: op=Filter serial=69792 15:55:41 Color wheel filter change from 0 to 0 15:55:41 FLIGetFilterPos err=0 currentPosition=0 15:55:41 FLIGetStepsRemaining err=0 RemainingSteps=0 15:55:41 Filter is already there-color wheel unchanged 15:55:41 Received message from Master: op=Shutter serial=69793 15:55:41 Shutter LASER close 15:55:41 Received message from Camera: op=State serial=69795 15:55:41 GetSingleValue result=40 Value=cccccccc 15:55:41 SkyScan query 15:55:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:55:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:55:42 Parameters OK 15:55:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:55:42 Set A/D data flow result=40 15:55:42 Set A/D channel type result=40 15:55:42 Set A/D encoding result=40 15:55:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:55:42 Set channel filter=0.000000e+000 result=40 15:55:42 Config A/D Result=40 15:55:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:55:42 Get A/D filter: -9.255963e+061 result=40 15:55:42 Get A/D value=-858993460 result=40 15:55:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:55:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:55:42 Parameters OK 15:55:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:55:42 Set A/D data flow result=40 15:55:42 Set A/D channel type result=40 15:55:42 Set A/D encoding result=40 15:55:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:55:42 Set channel filter=0.000000e+000 result=40 15:55:42 Config A/D Result=40 15:55:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:55:42 Get A/D filter: -9.255963e+061 result=40 15:55:42 Get A/D value=-858993460 result=40 15:55:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:55:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:55:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:55:42 Aux= 15:55:42 Message to Camera, serial 69795 queued [UTC 2018-12-11 15:55:54] 15:56:19 Received message from Master: op=PointingHead serial=69808 15:56:19 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:56:19 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:56:19 Point started: ret=0 15:56:19 point_skyscan result=0 15:56:20 Check angles 15:56:20 SkyScan query 15:56:20 SkyScan query done: ret=0 az=63.945<-4263 ze=66.555<-7563 Statuses=0009 0008 15:56:20 Msec=0 True Az=63.945 Ze=66.555 Az status=0009 Ze status=0008 15:56:21 Check angles 15:56:21 SkyScan query 15:56:21 SkyScan query done: ret=0 az=81.645<-5443 ze=66.495<-7567 Statuses=0009 0008 15:56:21 Msec=750 True Az=81.645 Ze=66.495 Az status=0009 Ze status=0008 15:56:21 Check angles 15:56:21 SkyScan query 15:56:22 SkyScan query done: ret=0 az=99.27<-6618 ze=66.495<-7567 Statuses=0009 0008 15:56:22 Msec=1500 True Az=99.27 Ze=66.495 Az status=0009 Ze status=0008 15:56:22 Check angles 15:56:22 SkyScan query 15:56:23 SkyScan query done: ret=0 az=116.82<-7788 ze=66.495<-7567 Statuses=0009 0008 15:56:23 Msec=2250 True Az=116.82 Ze=66.495 Az status=0009 Ze status=0008 15:56:23 Check angles 15:56:23 SkyScan query 15:56:23 SkyScan query done: ret=0 az=134.28<-8952 ze=66.495<-7567 Statuses=0009 0008 15:56:23 Msec=3000 True Az=134.28 Ze=66.495 Az status=0009 Ze status=0008 15:56:24 Check angles 15:56:24 SkyScan query 15:56:24 SkyScan query done: ret=0 az=152.1<-10140 ze=66.495<-7567 Statuses=0009 0008 15:56:24 Msec=3750 True Az=152.1 Ze=66.495 Az status=0009 Ze status=0008 15:56:24 Check angles 15:56:24 SkyScan query 15:56:25 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 15:56:25 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 15:56:25 Message to Master queued w/err=0: serial=69808 error=0 15:56:30 Received message from Master: op=Filter serial=69809 15:56:30 Color wheel filter change from 0 to 0 15:56:30 FLIGetFilterPos err=0 currentPosition=0 15:56:30 FLIGetStepsRemaining err=0 RemainingSteps=0 15:56:30 Filter is already there-color wheel unchanged 15:56:30 Received message from Master: op=Shutter serial=69810 15:56:30 Shutter LASER close 15:56:30 Received message from Camera: op=State serial=69812 15:56:30 GetSingleValue result=40 Value=cccccccc 15:56:30 SkyScan query 15:56:31 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:56:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:56:31 Parameters OK 15:56:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:56:31 Set A/D data flow result=40 15:56:31 Set A/D channel type result=40 15:56:31 Set A/D encoding result=40 15:56:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:56:31 Set channel filter=0.000000e+000 result=40 15:56:31 Config A/D Result=40 15:56:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:56:31 Get A/D filter: -9.255963e+061 result=40 15:56:31 Get A/D value=-858993460 result=40 15:56:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:56:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:56:31 Parameters OK 15:56:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:56:31 Set A/D data flow result=40 15:56:31 Set A/D channel type result=40 15:56:31 Set A/D encoding result=40 15:56:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:56:31 Set channel filter=0.000000e+000 result=40 15:56:31 Config A/D Result=40 15:56:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:56:31 Get A/D filter: -9.255963e+061 result=40 15:56:31 Get A/D value=-858993460 result=40 15:56:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:56:31 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:56:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:56:31 Aux= 15:56:31 Message to Camera, serial 69812 queued 15:57:08 Received message from Master: op=PointingHead serial=69825 15:57:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:57:08 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:57:08 Point started: ret=0 15:57:08 point_skyscan result=0 15:57:09 Check angles 15:57:09 SkyScan query 15:57:09 SkyScan query done: ret=0 az=135.21<-9014 ze=36.93<-9538 Statuses=0009 0009 15:57:09 Msec=0 True Az=135.21 Ze=36.93 Az status=0009 Ze status=0009 15:57:09 Check angles 15:57:09 SkyScan query 15:57:10 SkyScan query done: ret=0 az=117.735<-7849 ze=15.975<-10935 Statuses=0009 0009 15:57:10 Msec=750 True Az=117.735 Ze=15.975 Az status=0009 Ze status=0009 15:57:10 Check angles 15:57:10 SkyScan query 15:57:11 SkyScan query done: ret=0 az=100.35<-6690 ze=-4.98<-12332 Statuses=0009 0009 15:57:11 Msec=1500 True Az=100.35 Ze=-4.98 Az status=0009 Ze status=0009 15:57:11 Check angles 15:57:11 SkyScan query 15:57:12 SkyScan query done: ret=0 az=82.44<-5496 ze=-26.31<-13754 Statuses=0009 0009 15:57:12 Msec=2250 True Az=82.44 Ze=-26.31 Az status=0009 Ze status=0009 15:57:12 Check angles 15:57:12 SkyScan query 15:57:12 SkyScan query done: ret=0 az=64.995<-4333 ze=-38.565<-14571 Statuses=0009 0008 15:57:12 Msec=3000 True Az=64.995 Ze=-38.565 Az status=0009 Ze status=0008 15:57:12 Check angles 15:57:12 SkyScan query 15:57:13 SkyScan query done: ret=0 az=47.55<-3170 ze=-38.535<-14569 Statuses=0009 0008 15:57:13 Msec=3750 True Az=47.55 Ze=-38.535 Az status=0009 Ze status=0008 15:57:13 Check angles 15:57:13 SkyScan query 15:57:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:57:14 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:57:14 Message to Master queued w/err=0: serial=69825 error=0 15:57:19 Received message from Master: op=Filter serial=69826 15:57:19 Color wheel filter change from 0 to 0 15:57:19 FLIGetFilterPos err=0 currentPosition=0 15:57:19 FLIGetStepsRemaining err=0 RemainingSteps=0 15:57:19 Filter is already there-color wheel unchanged 15:57:19 Received message from Master: op=Shutter serial=69827 15:57:19 Shutter LASER close 15:57:19 Received message from Camera: op=State serial=69829 15:57:19 GetSingleValue result=40 Value=cccccccc 15:57:19 SkyScan query 15:57:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:57:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:57:20 Parameters OK 15:57:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:57:20 Set A/D data flow result=40 15:57:20 Set A/D channel type result=40 15:57:20 Set A/D encoding result=40 15:57:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:57:20 Set channel filter=0.000000e+000 result=40 15:57:20 Config A/D Result=40 15:57:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:57:20 Get A/D filter: -9.255963e+061 result=40 15:57:20 Get A/D value=-858993460 result=40 15:57:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:57:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:57:20 Parameters OK 15:57:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:57:20 Set A/D data flow result=40 15:57:20 Set A/D channel type result=40 15:57:20 Set A/D encoding result=40 15:57:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:57:20 Set channel filter=0.000000e+000 result=40 15:57:20 Config A/D Result=40 15:57:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:57:20 Get A/D filter: -9.255963e+061 result=40 15:57:20 Get A/D value=-858993460 result=40 15:57:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:57:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:57:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:57:20 Aux= 15:57:20 Message to Camera, serial 69829 queued 15:57:56 Received message from Master: op=PointingHead serial=69842 15:57:56 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:57:56 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:57:57 Point started: ret=0 15:57:57 point_skyscan result=0 15:57:58 Check angles 15:57:58 SkyScan query 15:57:58 SkyScan query done: ret=0 az=64.275<-4285 ze=-68.655<-16577 Statuses=0009 0009 15:57:58 Msec=0 True Az=64.275 Ze=-68.655 Az status=0009 Ze status=0009 15:57:58 Check angles 15:57:58 SkyScan query 15:57:59 SkyScan query done: ret=0 az=81.6<-5440 ze=-89.625<-17975 Statuses=0009 0009 15:57:59 Msec=750 True Az=81.6 Ze=-89.625 Az status=0009 Ze status=0009 15:57:59 Check angles 15:57:59 SkyScan query 15:58:00 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.595<-19373 Statuses=0009 0009 15:58:00 Msec=1500 True Az=99.36 Ze=-110.595 Az status=0009 Ze status=0009 15:58:00 Check angles 15:58:00 SkyScan query 15:58:00 SkyScan query done: ret=0 az=116.91<-7794 ze=-131.52<-20768 Statuses=0009 0009 15:58:00 Msec=2250 True Az=116.91 Ze=-131.52 Az status=0009 Ze status=0009 15:58:01 Check angles 15:58:01 SkyScan query 15:58:01 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 15:58:01 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 15:58:01 Check angles 15:58:01 SkyScan query 15:58:02 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:58:02 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:58:02 Message to Master queued w/err=0: serial=69842 error=0 15:58:07 Received message from Master: op=Filter serial=69843 15:58:07 Color wheel filter change from 0 to 0 15:58:07 FLIGetFilterPos err=0 currentPosition=0 15:58:07 FLIGetStepsRemaining err=0 RemainingSteps=0 15:58:07 Filter is already there-color wheel unchanged 15:58:07 Received message from Master: op=Shutter serial=69844 15:58:07 Shutter LASER close 15:58:07 Received message from Camera: op=State serial=69846 15:58:07 GetSingleValue result=40 Value=cccccccc 15:58:07 SkyScan query 15:58:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:58:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:58:08 Parameters OK 15:58:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:58:08 Set A/D data flow result=40 15:58:08 Set A/D channel type result=40 15:58:08 Set A/D encoding result=40 15:58:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:58:08 Set channel filter=0.000000e+000 result=40 15:58:08 Config A/D Result=40 15:58:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:58:08 Get A/D filter: -9.255963e+061 result=40 15:58:08 Get A/D value=-858993460 result=40 15:58:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:58:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:58:08 Parameters OK 15:58:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:58:08 Set A/D data flow result=40 15:58:08 Set A/D channel type result=40 15:58:08 Set A/D encoding result=40 15:58:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:58:08 Set channel filter=0.000000e+000 result=40 15:58:08 Config A/D Result=40 15:58:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:58:08 Get A/D filter: -9.255963e+061 result=40 15:58:08 Get A/D value=-858993460 result=40 15:58:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:58:08 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:58:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:58:08 Aux= 15:58:08 Message to Camera, serial 69846 queued 15:58:44 Received message from Master: op=PointingHead serial=69858 15:58:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:58:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:58:44 Point started: ret=0 15:58:44 point_skyscan result=0 15:58:45 Check angles 15:58:45 SkyScan query 15:58:45 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.465<-23431 Statuses=0009 0009 15:58:45 Msec=0 True Az=113.01 Ze=-171.465 Az status=0009 Ze status=0009 15:58:45 Check angles 15:58:45 SkyScan query 15:58:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:58:46 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:58:46 Message to Master queued w/err=0: serial=69858 error=0 15:58:51 Received message from Master: op=Filter serial=69859 15:58:51 Color wheel filter change from 0 to 0 15:58:51 FLIGetFilterPos err=0 currentPosition=0 15:58:51 FLIGetStepsRemaining err=0 RemainingSteps=0 15:58:51 Filter is already there-color wheel unchanged 15:58:51 Received message from Master: op=Shutter serial=69860 15:58:51 Shutter LASER open 15:58:51 Received message from Camera: op=State serial=69862 15:58:51 GetSingleValue result=40 Value=cccccccc 15:58:51 SkyScan query 15:58:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:58:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:58:52 Parameters OK 15:58:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:58:52 Set A/D data flow result=40 15:58:52 Set A/D channel type result=40 15:58:52 Set A/D encoding result=40 15:58:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:58:52 Set channel filter=0.000000e+000 result=40 15:58:52 Config A/D Result=40 15:58:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:58:52 Get A/D filter: -9.255963e+061 result=40 15:58:52 Get A/D value=-858993460 result=40 15:58:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:58:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:58:52 Parameters OK 15:58:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:58:52 Set A/D data flow result=40 15:58:52 Set A/D channel type result=40 15:58:52 Set A/D encoding result=40 15:58:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:58:52 Set channel filter=0.000000e+000 result=40 15:58:52 Config A/D Result=40 15:58:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:58:52 Get A/D filter: -9.255963e+061 result=40 15:58:52 Get A/D value=-858993460 result=40 15:58:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:58:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:58:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:58:52 Aux= 15:58:52 Message to Camera, serial 69862 queued 15:59:00 Received message from Master: op=Shutter serial=69872 15:59:00 Shutter LASER close 15:59:01 Received message from Master: op=PointingHead serial=69876 15:59:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:59:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:59:01 Point started: ret=0 15:59:01 point_skyscan result=0 15:59:02 Check angles 15:59:02 SkyScan query 15:59:03 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.37<-21558 Statuses=0009 0009 15:59:03 Msec=0 True Az=135.84 Ze=-143.37 Az status=0009 Ze status=0009 15:59:03 Check angles 15:59:03 SkyScan query 15:59:03 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.535<-20169 Statuses=0009 0009 15:59:03 Msec=750 True Az=153.24 Ze=-122.535 Az status=0009 Ze status=0009 15:59:04 Check angles 15:59:04 SkyScan query 15:59:04 SkyScan query done: ret=0 az=170.76<-11384 ze=-101.625<-18775 Statuses=0009 0009 15:59:04 Msec=1500 True Az=170.76 Ze=-101.625 Az status=0009 Ze status=0009 15:59:04 Check angles 15:59:04 SkyScan query 15:59:05 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.595<-17373 Statuses=0008 0009 15:59:05 Msec=2250 True Az=176.025 Ze=-80.595 Az status=0008 Ze status=0009 15:59:05 Check angles 15:59:05 SkyScan query 15:59:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.685<-15979 Statuses=0008 0009 15:59:06 Msec=3000 True Az=175.995 Ze=-59.685 Az status=0008 Ze status=0009 15:59:06 Check angles 15:59:06 SkyScan query 15:59:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:59:06 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:59:06 Message to Master queued w/err=0: serial=69876 error=0 15:59:11 Received message from Master: op=Filter serial=69877 15:59:11 Color wheel filter change from 0 to 0 15:59:11 FLIGetFilterPos err=0 currentPosition=0 15:59:11 FLIGetStepsRemaining err=0 RemainingSteps=0 15:59:11 Filter is already there-color wheel unchanged 15:59:12 Received message from Master: op=Shutter serial=69878 15:59:12 Shutter LASER close 15:59:12 Received message from Camera: op=State serial=69880 15:59:12 GetSingleValue result=40 Value=cccccccc 15:59:12 SkyScan query 15:59:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:59:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:59:12 Parameters OK 15:59:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:59:12 Set A/D data flow result=40 15:59:12 Set A/D channel type result=40 15:59:12 Set A/D encoding result=40 15:59:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:59:12 Set channel filter=0.000000e+000 result=40 15:59:12 Config A/D Result=40 15:59:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:59:12 Get A/D filter: -9.255963e+061 result=40 15:59:12 Get A/D value=-858993460 result=40 15:59:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:59:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:59:12 Parameters OK 15:59:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:59:12 Set A/D data flow result=40 15:59:12 Set A/D channel type result=40 15:59:12 Set A/D encoding result=40 15:59:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:59:12 Set channel filter=0.000000e+000 result=40 15:59:12 Config A/D Result=40 15:59:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:59:12 Get A/D filter: -9.255963e+061 result=40 15:59:12 Get A/D value=-858993460 result=40 15:59:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:59:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:59:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:59:12 Aux= 15:59:12 Message to Camera, serial 69880 queued 15:59:49 Received message from Master: op=PointingHead serial=69893 15:59:49 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:59:49 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:59:49 Point started: ret=0 15:59:49 point_skyscan result=0 15:59:50 Check angles 15:59:50 SkyScan query 15:59:51 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.675<-13445 Statuses=0009 0009 15:59:51 Msec=0 True Az=152.955 Ze=-21.675 Az status=0009 Ze status=0009 15:59:51 Check angles 15:59:51 SkyScan query 15:59:52 SkyScan query done: ret=0 az=135.525<-9035 ze=-0.675<-12045 Statuses=0009 0009 15:59:52 Msec=750 True Az=135.525 Ze=-0.675 Az status=0009 Ze status=0009 15:59:52 Check angles 15:59:52 SkyScan query 15:59:52 SkyScan query done: ret=0 az=117.81<-7854 ze=20.25<-10650 Statuses=0009 0009 15:59:52 Msec=1500 True Az=117.81 Ze=20.25 Az status=0009 Ze status=0009 15:59:52 Check angles 15:59:52 SkyScan query 15:59:53 SkyScan query done: ret=0 az=100.395<-6693 ze=41.25<-9250 Statuses=0009 0009 15:59:53 Msec=2250 True Az=100.395 Ze=41.25 Az status=0009 Ze status=0009 15:59:53 Check angles 15:59:53 SkyScan query 15:59:54 SkyScan query done: ret=0 az=86.04<-5736 ze=51.54<-8564 Statuses=0009 0008 15:59:54 Msec=3000 True Az=86.04 Ze=51.54 Az status=0009 Ze status=0008 15:59:54 Check angles 15:59:54 SkyScan query 15:59:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:59:55 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:59:55 Message to Master queued w/err=0: serial=69893 error=0 16:00:00 Received message from Master: op=Filter serial=69894 16:00:00 Color wheel filter change from 0 to 0 16:00:00 FLIGetFilterPos err=0 currentPosition=0 16:00:00 FLIGetStepsRemaining err=0 RemainingSteps=0 16:00:00 Filter is already there-color wheel unchanged 16:00:00 Received message from Master: op=Shutter serial=69895 16:00:00 Shutter LASER close 16:00:00 Received message from Camera: op=State serial=69897 16:00:00 GetSingleValue result=40 Value=cccccccc 16:00:00 SkyScan query 16:00:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:00:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:00 Parameters OK 16:00:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:00 Set A/D data flow result=40 16:00:00 Set A/D channel type result=40 16:00:00 Set A/D encoding result=40 16:00:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:00 Set channel filter=0.000000e+000 result=40 16:00:00 Config A/D Result=40 16:00:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:00 Get A/D filter: -9.255963e+061 result=40 16:00:00 Get A/D value=-858993460 result=40 16:00:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:00 Parameters OK 16:00:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:00 Set A/D data flow result=40 16:00:00 Set A/D channel type result=40 16:00:00 Set A/D encoding result=40 16:00:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:00 Set channel filter=0.000000e+000 result=40 16:00:00 Config A/D Result=40 16:00:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:00 Get A/D filter: -9.255963e+061 result=40 16:00:00 Get A/D value=-858993460 result=40 16:00:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:00:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:00:00 Aux= 16:00:00 Message to Camera, serial 69897 queued 16:00:37 Received message from Master: op=PointingHead serial=69910 16:00:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:00:37 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:00:38 Point started: ret=0 16:00:38 point_skyscan result=0 16:00:38 Check angles 16:00:38 SkyScan query 16:00:39 SkyScan query done: ret=0 az=109.2<-7280 ze=38.49<-9434 Statuses=0009 0008 16:00:39 Msec=0 True Az=109.2 Ze=38.49 Az status=0009 Ze status=0008 16:00:39 Check angles 16:00:39 SkyScan query 16:00:40 SkyScan query done: ret=0 az=126.66<-8444 ze=38.505<-9433 Statuses=0009 0008 16:00:40 Msec=750 True Az=126.66 Ze=38.505 Az status=0009 Ze status=0008 16:00:40 Check angles 16:00:40 SkyScan query 16:00:40 SkyScan query done: ret=0 az=144.135<-9609 ze=38.505<-9433 Statuses=0009 0008 16:00:40 Msec=1500 True Az=144.135 Ze=38.505 Az status=0009 Ze status=0008 16:00:41 Check angles 16:00:41 SkyScan query 16:00:41 SkyScan query done: ret=0 az=161.535<-10769 ze=38.505<-9433 Statuses=0009 0008 16:00:41 Msec=2250 True Az=161.535 Ze=38.505 Az status=0009 Ze status=0008 16:00:41 Check angles 16:00:41 SkyScan query 16:00:42 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:00:42 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:00:42 Check angles 16:00:42 SkyScan query 16:00:43 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:00:43 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:00:43 Message to Master queued w/err=0: serial=69910 error=0 16:00:48 Received message from Master: op=Filter serial=69911 16:00:48 Color wheel filter change from 0 to 0 16:00:48 FLIGetFilterPos err=0 currentPosition=0 16:00:48 FLIGetStepsRemaining err=0 RemainingSteps=0 16:00:48 Filter is already there-color wheel unchanged 16:00:48 Received message from Master: op=Shutter serial=69912 16:00:48 Shutter LASER close 16:00:48 Received message from Camera: op=State serial=69914 16:00:48 GetSingleValue result=40 Value=cccccccc 16:00:48 SkyScan query 16:00:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:00:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:48 Parameters OK 16:00:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:48 Set A/D data flow result=40 16:00:48 Set A/D channel type result=40 16:00:48 Set A/D encoding result=40 16:00:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:48 Set channel filter=0.000000e+000 result=40 16:00:48 Config A/D Result=40 16:00:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:48 Get A/D filter: -9.255963e+061 result=40 16:00:48 Get A/D value=-858993460 result=40 16:00:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:48 Parameters OK 16:00:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:48 Set A/D data flow result=40 16:00:48 Set A/D channel type result=40 16:00:48 Set A/D encoding result=40 16:00:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:48 Set channel filter=0.000000e+000 result=40 16:00:48 Config A/D Result=40 16:00:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:48 Get A/D filter: -9.255963e+061 result=40 16:00:48 Get A/D value=-858993460 result=40 16:00:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:00:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:00:48 Aux= 16:00:48 Message to Camera, serial 69914 queued 16:01:25 Received message from Master: op=PointingHead serial=69927 16:01:25 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:01:25 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:01:26 Point started: ret=0 16:01:26 point_skyscan result=0 16:01:26 Check angles 16:01:26 SkyScan query 16:01:27 SkyScan query done: ret=0 az=152.895<-10193 ze=8.88<-11408 Statuses=0009 0009 16:01:27 Msec=0 True Az=152.895 Ze=8.88 Az status=0009 Ze status=0009 16:01:27 Check angles 16:01:27 SkyScan query 16:01:28 SkyScan query done: ret=0 az=135.6<-9040 ze=-12.165<-12811 Statuses=0009 0009 16:01:28 Msec=750 True Az=135.6 Ze=-12.165 Az status=0009 Ze status=0009 16:01:28 Check angles 16:01:28 SkyScan query 16:01:28 SkyScan query done: ret=0 az=117.645<-7843 ze=-33.45<-14230 Statuses=0009 0009 16:01:28 Msec=1500 True Az=117.645 Ze=-33.45 Az status=0009 Ze status=0009 16:01:29 Check angles 16:01:29 SkyScan query 16:01:29 SkyScan query done: ret=0 az=100.275<-6685 ze=-51.555<-15437 Statuses=0009 0009 16:01:29 Msec=2250 True Az=100.275 Ze=-51.555 Az status=0009 Ze status=0009 16:01:29 Check angles 16:01:29 SkyScan query 16:01:30 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 16:01:30 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 16:01:30 Check angles 16:01:30 SkyScan query 16:01:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:01:31 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:01:31 Message to Master queued w/err=0: serial=69927 error=0 16:01:36 Received message from Master: op=Filter serial=69928 16:01:36 Color wheel filter change from 0 to 0 16:01:36 FLIGetFilterPos err=0 currentPosition=0 16:01:36 FLIGetStepsRemaining err=0 RemainingSteps=0 16:01:36 Filter is already there-color wheel unchanged 16:01:36 Received message from Master: op=Shutter serial=69929 16:01:36 Shutter LASER close 16:01:36 Received message from Camera: op=State serial=69931 16:01:36 GetSingleValue result=40 Value=cccccccc 16:01:36 SkyScan query 16:01:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:01:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:01:36 Parameters OK 16:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:01:36 Set A/D data flow result=40 16:01:36 Set A/D channel type result=40 16:01:36 Set A/D encoding result=40 16:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:01:36 Set channel filter=0.000000e+000 result=40 16:01:36 Config A/D Result=40 16:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:01:36 Get A/D filter: -9.255963e+061 result=40 16:01:36 Get A/D value=-858993460 result=40 16:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:01:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:01:36 Parameters OK 16:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:01:36 Set A/D data flow result=40 16:01:36 Set A/D channel type result=40 16:01:36 Set A/D encoding result=40 16:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:01:36 Set channel filter=0.000000e+000 result=40 16:01:36 Config A/D Result=40 16:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:01:36 Get A/D filter: -9.255963e+061 result=40 16:01:36 Get A/D value=-858993460 result=40 16:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:01:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:01:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:01:36 Aux= 16:01:36 Message to Camera, serial 69931 queued 16:02:13 Received message from Master: op=PointingHead serial=69944 16:02:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:02:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:02:14 Point started: ret=0 16:02:14 point_skyscan result=0 16:02:14 Check angles 16:02:14 SkyScan query 16:02:15 SkyScan query done: ret=0 az=108.84<-7256 ze=-81.06<-17404 Statuses=0009 0009 16:02:15 Msec=0 True Az=108.84 Ze=-81.06 Az status=0009 Ze status=0009 16:02:15 Check angles 16:02:15 SkyScan query 16:02:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.03<-18802 Statuses=0008 0009 16:02:16 Msec=750 True Az=112.995 Ze=-102.03 Az status=0008 Ze status=0009 16:02:16 Check angles 16:02:16 SkyScan query 16:02:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.405<-20227 Statuses=0008 0009 16:02:17 Msec=1500 True Az=112.995 Ze=-123.405 Az status=0008 Ze status=0009 16:02:17 Check angles 16:02:17 SkyScan query 16:02:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.375<-21625 Statuses=0008 0009 16:02:17 Msec=2250 True Az=112.995 Ze=-144.375 Az status=0008 Ze status=0009 16:02:17 Check angles 16:02:17 SkyScan query 16:02:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.75<-23050 Statuses=0008 0009 16:02:18 Msec=3000 True Az=112.995 Ze=-165.75 Az status=0008 Ze status=0009 16:02:18 Check angles 16:02:18 SkyScan query 16:02:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:02:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:02:19 Message to Master queued w/err=0: serial=69944 error=0 16:02:24 Received message from Master: op=Filter serial=69945 16:02:24 Color wheel filter change from 0 to 0 16:02:24 FLIGetFilterPos err=0 currentPosition=0 16:02:24 FLIGetStepsRemaining err=0 RemainingSteps=0 16:02:24 Filter is already there-color wheel unchanged 16:02:24 Received message from Master: op=Shutter serial=69946 16:02:24 Shutter LASER open 16:02:24 Received message from Camera: op=State serial=69948 16:02:24 GetSingleValue result=40 Value=cccccccc 16:02:24 SkyScan query 16:02:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:02:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:02:25 Parameters OK 16:02:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:02:25 Set A/D data flow result=40 16:02:25 Set A/D channel type result=40 16:02:25 Set A/D encoding result=40 16:02:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:02:25 Set channel filter=0.000000e+000 result=40 16:02:25 Config A/D Result=40 16:02:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:02:25 Get A/D filter: -9.255963e+061 result=40 16:02:25 Get A/D value=-858993460 result=40 16:02:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:02:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:02:25 Parameters OK 16:02:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:02:25 Set A/D data flow result=40 16:02:25 Set A/D channel type result=40 16:02:25 Set A/D encoding result=40 16:02:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:02:25 Set channel filter=0.000000e+000 result=40 16:02:25 Config A/D Result=40 16:02:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:02:25 Get A/D filter: -9.255963e+061 result=40 16:02:25 Get A/D value=-858993460 result=40 16:02:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:02:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:02:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:02:25 Aux= 16:02:25 Message to Camera, serial 69948 queued 16:02:33 Received message from Master: op=Shutter serial=69958 16:02:33 Shutter LASER close 16:02:34 Received message from Master: op=PointingHead serial=69962 16:02:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:02:34 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:02:34 Point started: ret=0 16:02:34 point_skyscan result=0 16:02:35 Check angles 16:02:35 SkyScan query 16:02:35 SkyScan query done: ret=0 az=90.045<-6003 ze=157.38<-1508 Statuses=0009 0009 16:02:35 Msec=0 True Az=90.045 Ze=157.38 Az status=0009 Ze status=0009 16:02:36 Check angles 16:02:36 SkyScan query 16:02:36 SkyScan query done: ret=0 az=72.06<-4804 ze=135.96<-2936 Statuses=0009 0009 16:02:36 Msec=750 True Az=72.06 Ze=135.96 Az status=0009 Ze status=0009 16:02:36 Check angles 16:02:36 SkyScan query 16:02:37 SkyScan query done: ret=0 az=54.465<-3631 ze=114.54<-4364 Statuses=0009 0009 16:02:37 Msec=1500 True Az=54.465 Ze=114.54 Az status=0009 Ze status=0009 16:02:37 Check angles 16:02:37 SkyScan query 16:02:38 SkyScan query done: ret=0 az=40.935<-2729 ze=93.63<-5758 Statuses=0009 0009 16:02:38 Msec=2250 True Az=40.935 Ze=93.63 Az status=0009 Ze status=0009 16:02:38 Check angles 16:02:38 SkyScan query 16:02:38 SkyScan query done: ret=0 az=40.995<-2733 ze=72.66<-7156 Statuses=0008 0009 16:02:38 Msec=3000 True Az=40.995 Ze=72.66 Az status=0008 Ze status=0009 16:02:39 Check angles 16:02:39 SkyScan query 16:02:39 SkyScan query done: ret=0 az=40.995<-2733 ze=52.155<-8523 Statuses=0008 0009 16:02:39 Msec=3750 True Az=40.995 Ze=52.155 Az status=0008 Ze status=0009 16:02:39 Check angles 16:02:39 SkyScan query 16:02:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:02:40 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:02:40 Message to Master queued w/err=0: serial=69962 error=0 16:02:45 Received message from Master: op=Filter serial=69963 16:02:45 Color wheel filter change from 0 to 0 16:02:45 FLIGetFilterPos err=0 currentPosition=0 16:02:45 FLIGetStepsRemaining err=0 RemainingSteps=0 16:02:45 Filter is already there-color wheel unchanged 16:02:45 Received message from Master: op=Shutter serial=69964 16:02:45 Shutter LASER close 16:02:45 Received message from Camera: op=State serial=69966 16:02:45 GetSingleValue result=40 Value=cccccccc 16:02:45 SkyScan query 16:02:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:02:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:02:46 Parameters OK 16:02:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:02:46 Set A/D data flow result=40 16:02:46 Set A/D channel type result=40 16:02:46 Set A/D encoding result=40 16:02:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:02:46 Set channel filter=0.000000e+000 result=40 16:02:46 Config A/D Result=40 16:02:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:02:46 Get A/D filter: -9.255963e+061 result=40 16:02:46 Get A/D value=-858993460 result=40 16:02:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:02:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:02:46 Parameters OK 16:02:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:02:46 Set A/D data flow result=40 16:02:46 Set A/D channel type result=40 16:02:46 Set A/D encoding result=40 16:02:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:02:46 Set channel filter=0.000000e+000 result=40 16:02:46 Config A/D Result=40 16:02:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:02:46 Get A/D filter: -9.255963e+061 result=40 16:02:46 Get A/D value=-858993460 result=40 16:02:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:02:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:02:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:02:46 Aux= 16:02:46 Message to Camera, serial 69966 queued 16:03:23 Received message from Master: op=PointingHead serial=69979 16:03:23 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:03:23 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:03:23 Point started: ret=0 16:03:23 point_skyscan result=0 16:03:24 Check angles 16:03:24 SkyScan query 16:03:24 SkyScan query done: ret=0 az=63.93<-4262 ze=66.555<-7563 Statuses=0009 0008 16:03:24 Msec=0 True Az=63.93 Ze=66.555 Az status=0009 Ze status=0008 16:03:24 Check angles 16:03:24 SkyScan query 16:03:25 SkyScan query done: ret=0 az=81.645<-5443 ze=66.51<-7566 Statuses=0009 0008 16:03:25 Msec=750 True Az=81.645 Ze=66.51 Az status=0009 Ze status=0008 16:03:25 Check angles 16:03:25 SkyScan query 16:03:26 SkyScan query done: ret=0 az=99.72<-6648 ze=66.495<-7567 Statuses=0009 0008 16:03:26 Msec=1500 True Az=99.72 Ze=66.495 Az status=0009 Ze status=0008 16:03:26 Check angles 16:03:26 SkyScan query 16:03:27 SkyScan query done: ret=0 az=117.195<-7813 ze=66.495<-7567 Statuses=0009 0008 16:03:27 Msec=2250 True Az=117.195 Ze=66.495 Az status=0009 Ze status=0008 16:03:27 Check angles 16:03:27 SkyScan query 16:03:27 SkyScan query done: ret=0 az=134.595<-8973 ze=66.495<-7567 Statuses=0009 0008 16:03:27 Msec=3000 True Az=134.595 Ze=66.495 Az status=0009 Ze status=0008 16:03:28 Check angles 16:03:28 SkyScan query 16:03:28 SkyScan query done: ret=0 az=152.13<-10142 ze=66.495<-7567 Statuses=0009 0008 16:03:28 Msec=3750 True Az=152.13 Ze=66.495 Az status=0009 Ze status=0008 16:03:28 Check angles 16:03:28 SkyScan query 16:03:29 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:03:29 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 16:03:29 Message to Master queued w/err=0: serial=69979 error=0 16:03:34 Received message from Master: op=Filter serial=69980 16:03:34 Color wheel filter change from 0 to 0 16:03:34 FLIGetFilterPos err=0 currentPosition=0 16:03:34 FLIGetStepsRemaining err=0 RemainingSteps=0 16:03:34 Filter is already there-color wheel unchanged 16:03:34 Received message from Master: op=Shutter serial=69981 16:03:34 Shutter LASER close 16:03:34 Received message from Camera: op=State serial=69983 16:03:34 GetSingleValue result=40 Value=cccccccc 16:03:34 SkyScan query 16:03:35 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:03:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:03:35 Parameters OK 16:03:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:03:35 Set A/D data flow result=40 16:03:35 Set A/D channel type result=40 16:03:35 Set A/D encoding result=40 16:03:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:03:35 Set channel filter=0.000000e+000 result=40 16:03:35 Config A/D Result=40 16:03:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:03:35 Get A/D filter: -9.255963e+061 result=40 16:03:35 Get A/D value=-858993460 result=40 16:03:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:03:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:03:35 Parameters OK 16:03:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:03:35 Set A/D data flow result=40 16:03:35 Set A/D channel type result=40 16:03:35 Set A/D encoding result=40 16:03:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:03:35 Set channel filter=0.000000e+000 result=40 16:03:35 Config A/D Result=40 16:03:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:03:35 Get A/D filter: -9.255963e+061 result=40 16:03:35 Get A/D value=-858993460 result=40 16:03:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:03:35 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:03:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:03:35 Aux= 16:03:35 Message to Camera, serial 69983 queued 16:04:12 Received message from Master: op=PointingHead serial=69996 16:04:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:04:12 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:04:12 Point started: ret=0 16:04:12 point_skyscan result=0 16:04:13 Check angles 16:04:13 SkyScan query 16:04:13 SkyScan query done: ret=0 az=134.55<-8970 ze=36.315<-9579 Statuses=0009 0009 16:04:13 Msec=0 True Az=134.55 Ze=36.315 Az status=0009 Ze status=0009 16:04:13 Check angles 16:04:13 SkyScan query 16:04:14 SkyScan query done: ret=0 az=116.805<-7787 ze=14.91<-11006 Statuses=0009 0009 16:04:14 Msec=750 True Az=116.805 Ze=14.91 Az status=0009 Ze status=0009 16:04:14 Check angles 16:04:14 SkyScan query 16:04:15 SkyScan query done: ret=0 az=99.33<-6622 ze=-6.03<-12402 Statuses=0009 0009 16:04:15 Msec=1500 True Az=99.33 Ze=-6.03 Az status=0009 Ze status=0009 16:04:15 Check angles 16:04:15 SkyScan query 16:04:15 SkyScan query done: ret=0 az=81.945<-5463 ze=-26.985<-13799 Statuses=0009 0009 16:04:15 Msec=2250 True Az=81.945 Ze=-26.985 Az status=0009 Ze status=0009 16:04:16 Check angles 16:04:16 SkyScan query 16:04:16 SkyScan query done: ret=0 az=64.095<-4273 ze=-38.565<-14571 Statuses=0009 0008 16:04:16 Msec=3000 True Az=64.095 Ze=-38.565 Az status=0009 Ze status=0008 16:04:16 Check angles 16:04:16 SkyScan query 16:04:17 SkyScan query done: ret=0 az=46.275<-3085 ze=-38.52<-14568 Statuses=0009 0008 16:04:17 Msec=3750 True Az=46.275 Ze=-38.52 Az status=0009 Ze status=0008 16:04:17 Check angles 16:04:17 SkyScan query 16:04:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:04:18 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:04:18 Message to Master queued w/err=0: serial=69996 error=0 16:04:23 Received message from Master: op=Filter serial=69997 16:04:23 Color wheel filter change from 0 to 0 16:04:23 FLIGetFilterPos err=0 currentPosition=0 16:04:23 FLIGetStepsRemaining err=0 RemainingSteps=0 16:04:23 Filter is already there-color wheel unchanged 16:04:23 Received message from Master: op=Shutter serial=69998 16:04:23 Shutter LASER close 16:04:23 Received message from Camera: op=State serial=70000 16:04:23 GetSingleValue result=40 Value=cccccccc 16:04:23 SkyScan query 16:04:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:04:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:04:24 Parameters OK 16:04:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:04:24 Set A/D data flow result=40 16:04:24 Set A/D channel type result=40 16:04:24 Set A/D encoding result=40 16:04:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:04:24 Set channel filter=0.000000e+000 result=40 16:04:24 Config A/D Result=40 16:04:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:04:24 Get A/D filter: -9.255963e+061 result=40 16:04:24 Get A/D value=-858993460 result=40 16:04:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:04:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:04:24 Parameters OK 16:04:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:04:24 Set A/D data flow result=40 16:04:24 Set A/D channel type result=40 16:04:24 Set A/D encoding result=40 16:04:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:04:24 Set channel filter=0.000000e+000 result=40 16:04:24 Config A/D Result=40 16:04:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:04:24 Get A/D filter: -9.255963e+061 result=40 16:04:24 Get A/D value=-858993460 result=40 16:04:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:04:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:04:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:04:24 Aux= 16:04:24 Message to Camera, serial 70000 queued 16:05:00 Received message from Master: op=PointingHead serial=70013 16:05:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:05:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:05:01 Point started: ret=0 16:05:01 point_skyscan result=0 16:05:02 Check angles 16:05:02 SkyScan query 16:05:02 SkyScan query done: ret=0 az=64.44<-4296 ze=-68.85<-16590 Statuses=0009 0009 16:05:02 Msec=0 True Az=64.44 Ze=-68.85 Az status=0009 Ze status=0009 16:05:02 Check angles 16:05:02 SkyScan query 16:05:03 SkyScan query done: ret=0 az=82.26<-5484 ze=-90.24<-18016 Statuses=0009 0009 16:05:03 Msec=750 True Az=82.26 Ze=-90.24 Az status=0009 Ze status=0009 16:05:03 Check angles 16:05:03 SkyScan query 16:05:04 SkyScan query done: ret=0 az=100.2<-6680 ze=-111.675<-19445 Statuses=0009 0009 16:05:04 Msec=1500 True Az=100.2 Ze=-111.675 Az status=0009 Ze status=0009 16:05:04 Check angles 16:05:04 SkyScan query 16:05:04 SkyScan query done: ret=0 az=117.555<-7837 ze=-132.555<-20837 Statuses=0009 0009 16:05:04 Msec=2250 True Az=117.555 Ze=-132.555 Az status=0009 Ze status=0009 16:05:05 Check angles 16:05:05 SkyScan query 16:05:05 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.555<-21437 Statuses=0009 0008 16:05:05 Msec=3000 True Az=130.965 Ze=-141.555 Az status=0009 Ze status=0008 16:05:05 Check angles 16:05:05 SkyScan query 16:05:06 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 16:05:06 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 16:05:06 Message to Master queued w/err=0: serial=70013 error=0 16:05:11 Received message from Master: op=Filter serial=70014 16:05:11 Color wheel filter change from 0 to 0 16:05:11 FLIGetFilterPos err=0 currentPosition=0 16:05:11 FLIGetStepsRemaining err=0 RemainingSteps=0 16:05:11 Filter is already there-color wheel unchanged 16:05:11 Received message from Master: op=Shutter serial=70015 16:05:11 Shutter LASER close 16:05:11 Received message from Camera: op=State serial=70017 16:05:11 GetSingleValue result=40 Value=cccccccc 16:05:11 SkyScan query 16:05:12 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:05:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:05:12 Parameters OK 16:05:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:05:12 Set A/D data flow result=40 16:05:12 Set A/D channel type result=40 16:05:12 Set A/D encoding result=40 16:05:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:05:12 Set channel filter=0.000000e+000 result=40 16:05:12 Config A/D Result=40 16:05:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:05:12 Get A/D filter: -9.255963e+061 result=40 16:05:12 Get A/D value=-858993460 result=40 16:05:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:05:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:05:12 Parameters OK 16:05:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:05:12 Set A/D data flow result=40 16:05:12 Set A/D channel type result=40 16:05:12 Set A/D encoding result=40 16:05:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:05:12 Set channel filter=0.000000e+000 result=40 16:05:12 Config A/D Result=40 16:05:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:05:12 Get A/D filter: -9.255963e+061 result=40 16:05:12 Get A/D value=-858993460 result=40 16:05:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:05:12 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:05:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:05:12 Aux= 16:05:12 Message to Camera, serial 70017 queued 16:05:49 Received message from Master: op=PointingHead serial=70030 16:05:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:05:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:05:49 Point started: ret=0 16:05:49 point_skyscan result=0 16:05:50 Check angles 16:05:50 SkyScan query 16:05:50 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.225<-23415 Statuses=0009 0009 16:05:50 Msec=0 True Az=113.01 Ze=-171.225 Az status=0009 Ze status=0009 16:05:50 Check angles 16:05:50 SkyScan query 16:05:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:05:51 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:05:51 Message to Master queued w/err=0: serial=70030 error=0 16:05:56 Received message from Master: op=Filter serial=70031 16:05:56 Color wheel filter change from 0 to 0 16:05:56 FLIGetFilterPos err=0 currentPosition=0 16:05:56 FLIGetStepsRemaining err=0 RemainingSteps=0 16:05:56 Filter is already there-color wheel unchanged 16:05:56 Received message from Master: op=Shutter serial=70032 16:05:56 Shutter LASER open 16:05:56 Received message from Camera: op=State serial=70034 16:05:56 GetSingleValue result=40 Value=cccccccc 16:05:56 SkyScan query 16:05:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:05:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:05:57 Parameters OK 16:05:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:05:57 Set A/D data flow result=40 16:05:57 Set A/D channel type result=40 16:05:57 Set A/D encoding result=40 16:05:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:05:57 Set channel filter=0.000000e+000 result=40 16:05:57 Config A/D Result=40 16:05:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:05:57 Get A/D filter: -9.255963e+061 result=40 16:05:57 Get A/D value=-858993460 result=40 16:05:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:05:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:05:57 Parameters OK 16:05:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:05:57 Set A/D data flow result=40 16:05:57 Set A/D channel type result=40 16:05:57 Set A/D encoding result=40 16:05:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:05:57 Set channel filter=0.000000e+000 result=40 16:05:57 Config A/D Result=40 16:05:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:05:57 Get A/D filter: -9.255963e+061 result=40 16:05:57 Get A/D value=-858993460 result=40 16:05:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:05:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:05:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:05:57 Aux= 16:05:57 Message to Camera, serial 70034 queued 16:06:05 Received message from Master: op=Shutter serial=70044 16:06:05 Shutter LASER close 16:06:06 Received message from Master: op=PointingHead serial=70048 16:06:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:06:06 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:06:06 Point started: ret=0 16:06:06 point_skyscan result=0 16:06:07 Check angles 16:06:07 SkyScan query 16:06:08 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.16<-21544 Statuses=0009 0009 16:06:08 Msec=0 True Az=135.96 Ze=-143.16 Az status=0009 Ze status=0009 16:06:08 Check angles 16:06:08 SkyScan query [UTC 2018-12-11 16:06:08] 16:06:08 SkyScan query done: ret=0 az=153.84<-10256 ze=-121.77<-20118 Statuses=0009 0009 16:06:08 Msec=750 True Az=153.84 Ze=-121.77 Az status=0009 Ze status=0009 16:06:08 Check angles 16:06:08 SkyScan query 16:06:09 SkyScan query done: ret=0 az=171.435<-11429 ze=-100.815<-18721 Statuses=0009 0009 16:06:09 Msec=1500 True Az=171.435 Ze=-100.815 Az status=0009 Ze status=0009 16:06:09 Check angles 16:06:09 SkyScan query 16:06:10 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.425<-17295 Statuses=0008 0009 16:06:10 Msec=2250 True Az=176.025 Ze=-79.425 Az status=0008 Ze status=0009 16:06:10 Check angles 16:06:10 SkyScan query 16:06:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.455<-15897 Statuses=0008 0009 16:06:11 Msec=3000 True Az=175.995 Ze=-58.455 Az status=0008 Ze status=0009 16:06:11 Check angles 16:06:11 SkyScan query 16:06:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:06:11 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:06:11 Message to Master queued w/err=0: serial=70048 error=0 16:06:16 Received message from Master: op=Filter serial=70049 16:06:16 Color wheel filter change from 0 to 0 16:06:16 FLIGetFilterPos err=0 currentPosition=0 16:06:16 FLIGetStepsRemaining err=0 RemainingSteps=0 16:06:16 Filter is already there-color wheel unchanged 16:06:16 Received message from Master: op=Shutter serial=70050 16:06:17 Shutter LASER close 16:06:17 Received message from Camera: op=State serial=70052 16:06:17 GetSingleValue result=40 Value=cccccccc 16:06:17 SkyScan query 16:06:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:06:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:06:17 Parameters OK 16:06:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:06:17 Set A/D data flow result=40 16:06:17 Set A/D channel type result=40 16:06:17 Set A/D encoding result=40 16:06:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:06:17 Set channel filter=0.000000e+000 result=40 16:06:17 Config A/D Result=40 16:06:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:06:17 Get A/D filter: -9.255963e+061 result=40 16:06:17 Get A/D value=-858993460 result=40 16:06:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:06:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:06:17 Parameters OK 16:06:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:06:17 Set A/D data flow result=40 16:06:17 Set A/D channel type result=40 16:06:17 Set A/D encoding result=40 16:06:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:06:17 Set channel filter=0.000000e+000 result=40 16:06:17 Config A/D Result=40 16:06:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:06:17 Get A/D filter: -9.255963e+061 result=40 16:06:17 Get A/D value=-858993460 result=40 16:06:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:06:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:06:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:06:17 Aux= 16:06:17 Message to Camera, serial 70052 queued 16:06:54 Received message from Master: op=PointingHead serial=70065 16:06:54 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:06:54 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:06:54 Point started: ret=0 16:06:54 point_skyscan result=0 16:06:55 Check angles 16:06:55 SkyScan query 16:06:56 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.885<-13459 Statuses=0009 0009 16:06:56 Msec=0 True Az=152.985 Ze=-21.885 Az status=0009 Ze status=0009 16:06:56 Check angles 16:06:56 SkyScan query 16:06:57 SkyScan query done: ret=0 az=135.66<-9044 ze=-0.855<-12057 Statuses=0009 0009 16:06:57 Msec=750 True Az=135.66 Ze=-0.855 Az status=0009 Ze status=0009 16:06:57 Check angles 16:06:57 SkyScan query 16:06:57 SkyScan query done: ret=0 az=118.095<-7873 ze=20.07<-10662 Statuses=0009 0009 16:06:57 Msec=1500 True Az=118.095 Ze=20.07 Az status=0009 Ze status=0009 16:06:57 Check angles 16:06:57 SkyScan query 16:06:58 SkyScan query done: ret=0 az=100.56<-6704 ze=41.04<-9264 Statuses=0009 0009 16:06:58 Msec=2250 True Az=100.56 Ze=41.04 Az status=0009 Ze status=0009 16:06:58 Check angles 16:06:58 SkyScan query 16:06:59 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 16:06:59 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 16:06:59 Check angles 16:06:59 SkyScan query 16:07:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:07:00 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:07:00 Message to Master queued w/err=0: serial=70065 error=0 16:07:05 Received message from Master: op=Filter serial=70066 16:07:05 Color wheel filter change from 0 to 0 16:07:05 FLIGetFilterPos err=0 currentPosition=0 16:07:05 FLIGetStepsRemaining err=0 RemainingSteps=0 16:07:05 Filter is already there-color wheel unchanged 16:07:05 Received message from Master: op=Shutter serial=70067 16:07:05 Shutter LASER close 16:07:05 Received message from Camera: op=State serial=70069 16:07:05 GetSingleValue result=40 Value=cccccccc 16:07:05 SkyScan query 16:07:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:07:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:05 Parameters OK 16:07:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:05 Set A/D data flow result=40 16:07:05 Set A/D channel type result=40 16:07:05 Set A/D encoding result=40 16:07:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:05 Set channel filter=0.000000e+000 result=40 16:07:05 Config A/D Result=40 16:07:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:05 Get A/D filter: -9.255963e+061 result=40 16:07:05 Get A/D value=-858993460 result=40 16:07:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:05 Parameters OK 16:07:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:05 Set A/D data flow result=40 16:07:05 Set A/D channel type result=40 16:07:05 Set A/D encoding result=40 16:07:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:05 Set channel filter=0.000000e+000 result=40 16:07:05 Config A/D Result=40 16:07:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:05 Get A/D filter: -9.255963e+061 result=40 16:07:05 Get A/D value=-858993460 result=40 16:07:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:07:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:07:05 Aux= 16:07:05 Message to Camera, serial 70069 queued 16:07:41 Received message from Master: op=PointingHead serial=70081 16:07:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:07:41 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:07:42 Point started: ret=0 16:07:42 point_skyscan result=0 16:07:42 Check angles 16:07:42 SkyScan query 16:07:43 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 16:07:43 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 16:07:43 Check angles 16:07:43 SkyScan query 16:07:44 SkyScan query done: ret=0 az=126.48<-8432 ze=38.505<-9433 Statuses=0009 0008 16:07:44 Msec=750 True Az=126.48 Ze=38.505 Az status=0009 Ze status=0008 16:07:44 Check angles 16:07:44 SkyScan query 16:07:44 SkyScan query done: ret=0 az=144.27<-9618 ze=38.505<-9433 Statuses=0009 0008 16:07:44 Msec=1500 True Az=144.27 Ze=38.505 Az status=0009 Ze status=0008 16:07:45 Check angles 16:07:45 SkyScan query 16:07:45 SkyScan query done: ret=0 az=161.67<-10778 ze=38.505<-9433 Statuses=0009 0008 16:07:45 Msec=2250 True Az=161.67 Ze=38.505 Az status=0009 Ze status=0008 16:07:45 Check angles 16:07:45 SkyScan query 16:07:46 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 16:07:46 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 16:07:46 Check angles 16:07:46 SkyScan query 16:07:47 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:07:47 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:07:47 Message to Master queued w/err=0: serial=70081 error=0 16:07:52 Received message from Master: op=Filter serial=70082 16:07:52 Color wheel filter change from 0 to 0 16:07:52 FLIGetFilterPos err=0 currentPosition=0 16:07:52 FLIGetStepsRemaining err=0 RemainingSteps=0 16:07:52 Filter is already there-color wheel unchanged 16:07:52 Received message from Master: op=Shutter serial=70083 16:07:52 Shutter LASER close 16:07:52 Received message from Camera: op=State serial=70085 16:07:52 GetSingleValue result=40 Value=cccccccc 16:07:52 SkyScan query 16:07:52 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:07:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:52 Parameters OK 16:07:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:52 Set A/D data flow result=40 16:07:52 Set A/D channel type result=40 16:07:52 Set A/D encoding result=40 16:07:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:52 Set channel filter=0.000000e+000 result=40 16:07:52 Config A/D Result=40 16:07:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:52 Get A/D filter: -9.255963e+061 result=40 16:07:52 Get A/D value=-858993460 result=40 16:07:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:52 Parameters OK 16:07:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:52 Set A/D data flow result=40 16:07:52 Set A/D channel type result=40 16:07:52 Set A/D encoding result=40 16:07:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:52 Set channel filter=0.000000e+000 result=40 16:07:52 Config A/D Result=40 16:07:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:52 Get A/D filter: -9.255963e+061 result=40 16:07:52 Get A/D value=-858993460 result=40 16:07:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:07:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:07:52 Aux= 16:07:52 Message to Camera, serial 70085 queued 16:08:29 Received message from Master: op=PointingHead serial=70098 16:08:29 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:08:29 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:08:30 Point started: ret=0 16:08:30 point_skyscan result=0 16:08:30 Check angles 16:08:30 SkyScan query 16:08:31 SkyScan query done: ret=0 az=153.105<-10207 ze=8.955<-11403 Statuses=0009 0009 16:08:31 Msec=0 True Az=153.105 Ze=8.955 Az status=0009 Ze status=0009 16:08:31 Check angles 16:08:31 SkyScan query 16:08:32 SkyScan query done: ret=0 az=135.33<-9022 ze=-12.435<-12829 Statuses=0009 0009 16:08:32 Msec=750 True Az=135.33 Ze=-12.435 Az status=0009 Ze status=0009 16:08:32 Check angles 16:08:32 SkyScan query 16:08:32 SkyScan query done: ret=0 az=117.345<-7823 ze=-33.84<-14256 Statuses=0009 0009 16:08:32 Msec=1500 True Az=117.345 Ze=-33.84 Az status=0009 Ze status=0009 16:08:33 Check angles 16:08:33 SkyScan query 16:08:33 SkyScan query done: ret=0 az=99.735<-6649 ze=-51.57<-15438 Statuses=0009 0009 16:08:33 Msec=2250 True Az=99.735 Ze=-51.57 Az status=0009 Ze status=0009 16:08:33 Check angles 16:08:33 SkyScan query 16:08:34 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 16:08:34 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 16:08:34 Check angles 16:08:34 SkyScan query 16:08:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:08:35 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:08:35 Message to Master queued w/err=0: serial=70098 error=0 16:08:40 Received message from Master: op=Filter serial=70099 16:08:40 Color wheel filter change from 0 to 0 16:08:40 FLIGetFilterPos err=0 currentPosition=0 16:08:40 FLIGetStepsRemaining err=0 RemainingSteps=0 16:08:40 Filter is already there-color wheel unchanged 16:08:40 Received message from Master: op=Shutter serial=70100 16:08:40 Shutter LASER close 16:08:40 Received message from Camera: op=State serial=70102 16:08:40 GetSingleValue result=40 Value=cccccccc 16:08:40 SkyScan query 16:08:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:08:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:08:41 Parameters OK 16:08:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:08:41 Set A/D data flow result=40 16:08:41 Set A/D channel type result=40 16:08:41 Set A/D encoding result=40 16:08:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:08:41 Set channel filter=0.000000e+000 result=40 16:08:41 Config A/D Result=40 16:08:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:08:41 Get A/D filter: -9.255963e+061 result=40 16:08:41 Get A/D value=-858993460 result=40 16:08:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:08:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:08:41 Parameters OK 16:08:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:08:41 Set A/D data flow result=40 16:08:41 Set A/D channel type result=40 16:08:41 Set A/D encoding result=40 16:08:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:08:41 Set channel filter=0.000000e+000 result=40 16:08:41 Config A/D Result=40 16:08:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:08:41 Get A/D filter: -9.255963e+061 result=40 16:08:41 Get A/D value=-858993460 result=40 16:08:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:08:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:08:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:08:41 Aux= 16:08:41 Message to Camera, serial 70102 queued 16:09:17 Received message from Master: op=PointingHead serial=70115 16:09:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:09:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:09:18 Point started: ret=0 16:09:18 point_skyscan result=0 16:09:18 Check angles 16:09:18 SkyScan query 16:09:19 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.12<-17408 Statuses=0009 0009 16:09:19 Msec=0 True Az=108.915 Ze=-81.12 Az status=0009 Ze status=0009 16:09:19 Check angles 16:09:19 SkyScan query 16:09:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.06<-18804 Statuses=0008 0009 16:09:20 Msec=750 True Az=112.995 Ze=-102.06 Az status=0008 Ze status=0009 16:09:20 Check angles 16:09:20 SkyScan query 16:09:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.045<-20203 Statuses=0008 0009 16:09:21 Msec=1500 True Az=112.995 Ze=-123.045 Az status=0008 Ze status=0009 16:09:21 Check angles 16:09:21 SkyScan query 16:09:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.985<-21599 Statuses=0008 0009 16:09:21 Msec=2250 True Az=112.995 Ze=-143.985 Az status=0008 Ze status=0009 16:09:21 Check angles 16:09:21 SkyScan query 16:09:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.955<-22997 Statuses=0008 0009 16:09:22 Msec=3000 True Az=112.995 Ze=-164.955 Az status=0008 Ze status=0009 16:09:22 Check angles 16:09:22 SkyScan query 16:09:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:09:23 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:09:23 Message to Master queued w/err=0: serial=70115 error=0 16:09:28 Received message from Master: op=Filter serial=70116 16:09:28 Color wheel filter change from 0 to 0 16:09:28 FLIGetFilterPos err=0 currentPosition=0 16:09:28 FLIGetStepsRemaining err=0 RemainingSteps=0 16:09:28 Filter is already there-color wheel unchanged 16:09:28 Received message from Master: op=Shutter serial=70117 16:09:28 Shutter LASER open 16:09:28 Received message from Camera: op=State serial=70119 16:09:28 GetSingleValue result=40 Value=cccccccc 16:09:28 SkyScan query 16:09:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:09:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:29 Parameters OK 16:09:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:29 Set A/D data flow result=40 16:09:29 Set A/D channel type result=40 16:09:29 Set A/D encoding result=40 16:09:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:29 Set channel filter=0.000000e+000 result=40 16:09:29 Config A/D Result=40 16:09:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:29 Get A/D filter: -9.255963e+061 result=40 16:09:29 Get A/D value=-858993460 result=40 16:09:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:29 Parameters OK 16:09:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:29 Set A/D data flow result=40 16:09:29 Set A/D channel type result=40 16:09:29 Set A/D encoding result=40 16:09:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:29 Set channel filter=0.000000e+000 result=40 16:09:29 Config A/D Result=40 16:09:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:29 Get A/D filter: -9.255963e+061 result=40 16:09:29 Get A/D value=-858993460 result=40 16:09:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:09:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:09:29 Aux= 16:09:29 Message to Camera, serial 70119 queued 16:09:37 Received message from Master: op=Shutter serial=70129 16:09:37 Shutter LASER close 16:09:38 Received message from Master: op=PointingHead serial=70133 16:09:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:09:38 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:09:38 Point started: ret=0 16:09:38 point_skyscan result=0 16:09:39 Check angles 16:09:39 SkyScan query 16:09:39 SkyScan query done: ret=0 az=90.18<-6012 ze=157.53<-1498 Statuses=0009 0009 16:09:39 Msec=0 True Az=90.18 Ze=157.53 Az status=0009 Ze status=0009 16:09:39 Check angles 16:09:39 SkyScan query 16:09:40 SkyScan query done: ret=0 az=72.75<-4850 ze=136.56<-2896 Statuses=0009 0009 16:09:40 Msec=750 True Az=72.75 Ze=136.56 Az status=0009 Ze status=0009 16:09:40 Check angles 16:09:40 SkyScan query 16:09:41 SkyScan query done: ret=0 az=54.975<-3665 ze=115.2<-4320 Statuses=0009 0009 16:09:41 Msec=1500 True Az=54.975 Ze=115.2 Az status=0009 Ze status=0009 16:09:41 Check angles 16:09:41 SkyScan query 16:09:42 SkyScan query done: ret=0 az=40.86<-2724 ze=94.2<-5720 Statuses=0009 0009 16:09:42 Msec=2250 True Az=40.86 Ze=94.2 Az status=0009 Ze status=0009 16:09:42 Check angles 16:09:42 SkyScan query 16:09:42 SkyScan query done: ret=0 az=40.995<-2733 ze=73.275<-7115 Statuses=0008 0009 16:09:42 Msec=3000 True Az=40.995 Ze=73.275 Az status=0008 Ze status=0009 16:09:42 Check angles 16:09:42 SkyScan query 16:09:43 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 16:09:43 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 16:09:43 Check angles 16:09:43 SkyScan query 16:09:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:09:44 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:09:44 Message to Master queued w/err=0: serial=70133 error=0 16:09:49 Received message from Master: op=Filter serial=70134 16:09:49 Color wheel filter change from 0 to 0 16:09:49 FLIGetFilterPos err=0 currentPosition=0 16:09:49 FLIGetStepsRemaining err=0 RemainingSteps=0 16:09:49 Filter is already there-color wheel unchanged 16:09:49 Received message from Master: op=Shutter serial=70135 16:09:49 Shutter LASER close 16:09:49 Received message from Camera: op=State serial=70137 16:09:49 GetSingleValue result=40 Value=cccccccc 16:09:49 SkyScan query 16:09:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:09:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:50 Parameters OK 16:09:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:50 Set A/D data flow result=40 16:09:50 Set A/D channel type result=40 16:09:50 Set A/D encoding result=40 16:09:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:50 Set channel filter=0.000000e+000 result=40 16:09:50 Config A/D Result=40 16:09:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:50 Get A/D filter: -9.255963e+061 result=40 16:09:50 Get A/D value=-858993460 result=40 16:09:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:50 Parameters OK 16:09:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:50 Set A/D data flow result=40 16:09:50 Set A/D channel type result=40 16:09:50 Set A/D encoding result=40 16:09:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:50 Set channel filter=0.000000e+000 result=40 16:09:50 Config A/D Result=40 16:09:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:50 Get A/D filter: -9.255963e+061 result=40 16:09:50 Get A/D value=-858993460 result=40 16:09:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:09:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:09:50 Aux= 16:09:50 Message to Camera, serial 70137 queued 16:10:27 Received message from Master: op=PointingHead serial=70150 16:10:27 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:10:27 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:10:27 Point started: ret=0 16:10:27 point_skyscan result=0 16:10:28 Check angles 16:10:28 SkyScan query 16:10:28 SkyScan query done: ret=0 az=64.26<-4284 ze=66.555<-7563 Statuses=0009 0008 16:10:28 Msec=0 True Az=64.26 Ze=66.555 Az status=0009 Ze status=0008 16:10:28 Check angles 16:10:28 SkyScan query 16:10:29 SkyScan query done: ret=0 az=81.6<-5440 ze=66.51<-7566 Statuses=0009 0008 16:10:29 Msec=750 True Az=81.6 Ze=66.51 Az status=0009 Ze status=0008 16:10:29 Check angles 16:10:29 SkyScan query 16:10:30 SkyScan query done: ret=0 az=99.69<-6646 ze=66.495<-7567 Statuses=0009 0008 16:10:30 Msec=1500 True Az=99.69 Ze=66.495 Az status=0009 Ze status=0008 16:10:30 Check angles 16:10:30 SkyScan query 16:10:31 SkyScan query done: ret=0 az=117.18<-7812 ze=66.495<-7567 Statuses=0009 0008 16:10:31 Msec=2250 True Az=117.18 Ze=66.495 Az status=0009 Ze status=0008 16:10:31 Check angles 16:10:31 SkyScan query 16:10:31 SkyScan query done: ret=0 az=134.61<-8974 ze=66.495<-7567 Statuses=0009 0008 16:10:31 Msec=3000 True Az=134.61 Ze=66.495 Az status=0009 Ze status=0008 16:10:31 Check angles 16:10:31 SkyScan query 16:10:32 SkyScan query done: ret=0 az=152.13<-10142 ze=66.495<-7567 Statuses=0009 0008 16:10:32 Msec=3750 True Az=152.13 Ze=66.495 Az status=0009 Ze status=0008 16:10:32 Check angles 16:10:32 SkyScan query 16:10:33 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:10:33 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 16:10:33 Message to Master queued w/err=0: serial=70150 error=0 16:10:38 Received message from Master: op=Filter serial=70151 16:10:38 Color wheel filter change from 0 to 0 16:10:38 FLIGetFilterPos err=0 currentPosition=0 16:10:38 FLIGetStepsRemaining err=0 RemainingSteps=0 16:10:38 Filter is already there-color wheel unchanged 16:10:38 Received message from Master: op=Shutter serial=70152 16:10:38 Shutter LASER close 16:10:38 Received message from Camera: op=State serial=70154 16:10:38 GetSingleValue result=40 Value=cccccccc 16:10:38 SkyScan query 16:10:39 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:10:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:10:39 Parameters OK 16:10:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:10:39 Set A/D data flow result=40 16:10:39 Set A/D channel type result=40 16:10:39 Set A/D encoding result=40 16:10:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:10:39 Set channel filter=0.000000e+000 result=40 16:10:39 Config A/D Result=40 16:10:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:10:39 Get A/D filter: -9.255963e+061 result=40 16:10:39 Get A/D value=-858993460 result=40 16:10:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:10:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:10:39 Parameters OK 16:10:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:10:39 Set A/D data flow result=40 16:10:39 Set A/D channel type result=40 16:10:39 Set A/D encoding result=40 16:10:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:10:39 Set channel filter=0.000000e+000 result=40 16:10:39 Config A/D Result=40 16:10:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:10:39 Get A/D filter: -9.255963e+061 result=40 16:10:39 Get A/D value=-858993460 result=40 16:10:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:10:39 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:10:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:10:39 Aux= 16:10:39 Message to Camera, serial 70154 queued 16:11:16 Received message from Master: op=PointingHead serial=70167 16:11:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:11:16 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:11:16 Point started: ret=0 16:11:16 point_skyscan result=0 16:11:17 Check angles 16:11:17 SkyScan query 16:11:17 SkyScan query done: ret=0 az=134.79<-8986 ze=36.57<-9562 Statuses=0009 0009 16:11:17 Msec=0 True Az=134.79 Ze=36.57 Az status=0009 Ze status=0009 16:11:17 Check angles 16:11:17 SkyScan query 16:11:18 SkyScan query done: ret=0 az=117.405<-7827 ze=15.645<-10957 Statuses=0009 0009 16:11:18 Msec=750 True Az=117.405 Ze=15.645 Az status=0009 Ze status=0009 16:11:18 Check angles 16:11:18 SkyScan query 16:11:19 SkyScan query done: ret=0 az=100.005<-6667 ze=-5.34<-12356 Statuses=0009 0009 16:11:19 Msec=1500 True Az=100.005 Ze=-5.34 Az status=0009 Ze status=0009 16:11:19 Check angles 16:11:19 SkyScan query 16:11:20 SkyScan query done: ret=0 az=82.185<-5479 ze=-26.7<-13780 Statuses=0009 0009 16:11:20 Msec=2250 True Az=82.185 Ze=-26.7 Az status=0009 Ze status=0009 16:11:20 Check angles 16:11:20 SkyScan query 16:11:20 SkyScan query done: ret=0 az=64.575<-4305 ze=-38.565<-14571 Statuses=0009 0008 16:11:20 Msec=3000 True Az=64.575 Ze=-38.565 Az status=0009 Ze status=0008 16:11:20 Check angles 16:11:20 SkyScan query 16:11:21 SkyScan query done: ret=0 az=47.115<-3141 ze=-38.535<-14569 Statuses=0009 0008 16:11:21 Msec=3750 True Az=47.115 Ze=-38.535 Az status=0009 Ze status=0008 16:11:21 Check angles 16:11:21 SkyScan query 16:11:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:11:22 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:11:22 Message to Master queued w/err=0: serial=70167 error=0 16:11:27 Received message from Master: op=Filter serial=70168 16:11:27 Color wheel filter change from 0 to 0 16:11:27 FLIGetFilterPos err=0 currentPosition=0 16:11:27 FLIGetStepsRemaining err=0 RemainingSteps=0 16:11:27 Filter is already there-color wheel unchanged 16:11:27 Received message from Master: op=Shutter serial=70169 16:11:27 Shutter LASER close 16:11:27 Received message from Camera: op=State serial=70171 16:11:27 GetSingleValue result=40 Value=cccccccc 16:11:27 SkyScan query 16:11:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:11:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:11:28 Parameters OK 16:11:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:11:28 Set A/D data flow result=40 16:11:28 Set A/D channel type result=40 16:11:28 Set A/D encoding result=40 16:11:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:11:28 Set channel filter=0.000000e+000 result=40 16:11:28 Config A/D Result=40 16:11:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:11:28 Get A/D filter: -9.255963e+061 result=40 16:11:28 Get A/D value=-858993460 result=40 16:11:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:11:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:11:28 Parameters OK 16:11:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:11:28 Set A/D data flow result=40 16:11:28 Set A/D channel type result=40 16:11:28 Set A/D encoding result=40 16:11:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:11:28 Set channel filter=0.000000e+000 result=40 16:11:28 Config A/D Result=40 16:11:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:11:28 Get A/D filter: -9.255963e+061 result=40 16:11:28 Get A/D value=-858993460 result=40 16:11:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:11:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:11:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:11:28 Aux= 16:11:28 Message to Camera, serial 70171 queued 16:12:04 Received message from Master: op=PointingHead serial=70184 16:12:04 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:12:04 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:12:05 Point started: ret=0 16:12:05 point_skyscan result=0 16:12:06 Check angles 16:12:06 SkyScan query 16:12:06 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.505<-16567 Statuses=0009 0009 16:12:06 Msec=0 True Az=64.215 Ze=-68.505 Az status=0009 Ze status=0009 16:12:06 Check angles 16:12:06 SkyScan query 16:12:07 SkyScan query done: ret=0 az=81.51<-5434 ze=-89.49<-17966 Statuses=0009 0009 16:12:07 Msec=750 True Az=81.51 Ze=-89.49 Az status=0009 Ze status=0009 16:12:07 Check angles 16:12:07 SkyScan query 16:12:08 SkyScan query done: ret=0 az=99.15<-6610 ze=-110.445<-19363 Statuses=0009 0009 16:12:08 Msec=1500 True Az=99.15 Ze=-110.445 Az status=0009 Ze status=0009 16:12:08 Check angles 16:12:08 SkyScan query 16:12:08 SkyScan query done: ret=0 az=116.7<-7780 ze=-131.385<-20759 Statuses=0009 0009 16:12:08 Msec=2250 True Az=116.7 Ze=-131.385 Az status=0009 Ze status=0009 16:12:09 Check angles 16:12:09 SkyScan query 16:12:09 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.555<-21437 Statuses=0009 0008 16:12:09 Msec=3000 True Az=131.175 Ze=-141.555 Az status=0009 Ze status=0008 16:12:09 Check angles 16:12:09 SkyScan query 16:12:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 16:12:10 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 16:12:10 Message to Master queued w/err=0: serial=70184 error=0 16:12:15 Received message from Master: op=Filter serial=70185 16:12:15 Color wheel filter change from 0 to 0 16:12:15 FLIGetFilterPos err=0 currentPosition=0 16:12:15 FLIGetStepsRemaining err=0 RemainingSteps=0 16:12:15 Filter is already there-color wheel unchanged 16:12:15 Received message from Master: op=Shutter serial=70186 16:12:15 Shutter LASER close 16:12:15 Received message from Camera: op=State serial=70188 16:12:15 GetSingleValue result=40 Value=cccccccc 16:12:15 SkyScan query 16:12:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:12:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:12:16 Parameters OK 16:12:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:12:16 Set A/D data flow result=40 16:12:16 Set A/D channel type result=40 16:12:16 Set A/D encoding result=40 16:12:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:12:16 Set channel filter=0.000000e+000 result=40 16:12:16 Config A/D Result=40 16:12:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:12:16 Get A/D filter: -9.255963e+061 result=40 16:12:16 Get A/D value=-858993460 result=40 16:12:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:12:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:12:16 Parameters OK 16:12:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:12:16 Set A/D data flow result=40 16:12:16 Set A/D channel type result=40 16:12:16 Set A/D encoding result=40 16:12:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:12:16 Set channel filter=0.000000e+000 result=40 16:12:16 Config A/D Result=40 16:12:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:12:16 Get A/D filter: -9.255963e+061 result=40 16:12:16 Get A/D value=-858993460 result=40 16:12:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:12:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:12:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:12:16 Aux= 16:12:16 Message to Camera, serial 70188 queued 16:12:52 Received message from Master: op=PointingHead serial=70200 16:12:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:12:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:12:52 Point started: ret=0 16:12:52 point_skyscan result=0 16:12:53 Check angles 16:12:53 SkyScan query 16:12:53 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.36<-23424 Statuses=0009 0009 16:12:53 Msec=0 True Az=113.01 Ze=-171.36 Az status=0009 Ze status=0009 16:12:53 Check angles 16:12:53 SkyScan query 16:12:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:12:54 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:12:54 Message to Master queued w/err=0: serial=70200 error=0 16:12:59 Received message from Master: op=Filter serial=70201 16:12:59 Color wheel filter change from 0 to 0 16:12:59 FLIGetFilterPos err=0 currentPosition=0 16:12:59 FLIGetStepsRemaining err=0 RemainingSteps=0 16:12:59 Filter is already there-color wheel unchanged 16:12:59 Received message from Master: op=Shutter serial=70202 16:12:59 Shutter LASER open 16:12:59 Received message from Camera: op=State serial=70204 16:12:59 GetSingleValue result=40 Value=cccccccc 16:12:59 SkyScan query 16:13:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:13:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:13:00 Parameters OK 16:13:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:13:00 Set A/D data flow result=40 16:13:00 Set A/D channel type result=40 16:13:00 Set A/D encoding result=40 16:13:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:13:00 Set channel filter=0.000000e+000 result=40 16:13:00 Config A/D Result=40 16:13:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:13:00 Get A/D filter: -9.255963e+061 result=40 16:13:00 Get A/D value=-858993460 result=40 16:13:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:13:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:13:00 Parameters OK 16:13:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:13:00 Set A/D data flow result=40 16:13:00 Set A/D channel type result=40 16:13:00 Set A/D encoding result=40 16:13:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:13:00 Set channel filter=0.000000e+000 result=40 16:13:00 Config A/D Result=40 16:13:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:13:00 Get A/D filter: -9.255963e+061 result=40 16:13:00 Get A/D value=-858993460 result=40 16:13:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:13:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:13:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:13:00 Aux= 16:13:00 Message to Camera, serial 70204 queued 16:13:08 Received message from Master: op=Shutter serial=70214 16:13:08 Shutter LASER close 16:13:09 Received message from Master: op=PointingHead serial=70218 16:13:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:13:09 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:13:09 Point started: ret=0 16:13:09 point_skyscan result=0 16:13:10 Check angles 16:13:10 SkyScan query 16:13:11 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.785<-21519 Statuses=0009 0009 16:13:11 Msec=0 True Az=136.365 Ze=-142.785 Az status=0009 Ze status=0009 16:13:11 Check angles 16:13:11 SkyScan query 16:13:11 SkyScan query done: ret=0 az=153.825<-10255 ze=-121.8<-20120 Statuses=0009 0009 16:13:11 Msec=750 True Az=153.825 Ze=-121.8 Az status=0009 Ze status=0009 16:13:12 Check angles 16:13:12 SkyScan query 16:13:12 SkyScan query done: ret=0 az=171.27<-11418 ze=-100.86<-18724 Statuses=0009 0009 16:13:12 Msec=1500 True Az=171.27 Ze=-100.86 Az status=0009 Ze status=0009 16:13:12 Check angles 16:13:12 SkyScan query 16:13:13 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.965<-17331 Statuses=0008 0009 16:13:13 Msec=2250 True Az=176.025 Ze=-79.965 Az status=0008 Ze status=0009 16:13:13 Check angles 16:13:13 SkyScan query 16:13:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.95<-15930 Statuses=0008 0009 16:13:14 Msec=3000 True Az=175.995 Ze=-58.95 Az status=0008 Ze status=0009 16:13:14 Check angles 16:13:14 SkyScan query 16:13:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:13:14 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:13:14 Message to Master queued w/err=0: serial=70218 error=0 16:13:19 Received message from Master: op=Filter serial=70219 16:13:19 Color wheel filter change from 0 to 0 16:13:19 FLIGetFilterPos err=0 currentPosition=0 16:13:19 FLIGetStepsRemaining err=0 RemainingSteps=0 16:13:19 Filter is already there-color wheel unchanged 16:13:20 Received message from Master: op=Shutter serial=70220 16:13:20 Shutter LASER close 16:13:20 Received message from Camera: op=State serial=70222 16:13:20 GetSingleValue result=40 Value=cccccccc 16:13:20 SkyScan query 16:13:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:13:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:13:20 Parameters OK 16:13:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:13:20 Set A/D data flow result=40 16:13:20 Set A/D channel type result=40 16:13:20 Set A/D encoding result=40 16:13:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:13:20 Set channel filter=0.000000e+000 result=40 16:13:20 Config A/D Result=40 16:13:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:13:20 Get A/D filter: -9.255963e+061 result=40 16:13:20 Get A/D value=-858993460 result=40 16:13:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:13:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:13:20 Parameters OK 16:13:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:13:20 Set A/D data flow result=40 16:13:20 Set A/D channel type result=40 16:13:20 Set A/D encoding result=40 16:13:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:13:20 Set channel filter=0.000000e+000 result=40 16:13:20 Config A/D Result=40 16:13:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:13:20 Get A/D filter: -9.255963e+061 result=40 16:13:20 Get A/D value=-858993460 result=40 16:13:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:13:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:13:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:13:20 Aux= 16:13:20 Message to Camera, serial 70222 queued 16:13:57 Received message from Master: op=PointingHead serial=70235 16:13:57 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:13:57 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:13:58 Point started: ret=0 16:13:58 point_skyscan result=0 16:13:58 Check angles 16:13:58 SkyScan query 16:13:59 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.795<-13453 Statuses=0009 0009 16:13:59 Msec=0 True Az=152.985 Ze=-21.795 Az status=0009 Ze status=0009 16:13:59 Check angles 16:13:59 SkyScan query 16:14:00 SkyScan query done: ret=0 az=135.51<-9034 ze=-0.78<-12052 Statuses=0009 0009 16:14:00 Msec=750 True Az=135.51 Ze=-0.78 Az status=0009 Ze status=0009 16:14:00 Check angles 16:14:00 SkyScan query 16:14:00 SkyScan query done: ret=0 az=117.96<-7864 ze=20.145<-10657 Statuses=0009 0009 16:14:00 Msec=1500 True Az=117.96 Ze=20.145 Az status=0009 Ze status=0009 16:14:01 Check angles 16:14:01 SkyScan query 16:14:01 SkyScan query done: ret=0 az=100.5<-6700 ze=41.13<-9258 Statuses=0009 0009 16:14:01 Msec=2250 True Az=100.5 Ze=41.13 Az status=0009 Ze status=0009 16:14:01 Check angles 16:14:01 SkyScan query 16:14:02 SkyScan query done: ret=0 az=86.04<-5736 ze=51.54<-8564 Statuses=0009 0008 16:14:02 Msec=3000 True Az=86.04 Ze=51.54 Az status=0009 Ze status=0008 16:14:02 Check angles 16:14:02 SkyScan query 16:14:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:14:03 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:14:03 Message to Master queued w/err=0: serial=70235 error=0 16:14:08 Received message from Master: op=Filter serial=70236 16:14:08 Color wheel filter change from 0 to 0 16:14:08 FLIGetFilterPos err=0 currentPosition=0 16:14:08 FLIGetStepsRemaining err=0 RemainingSteps=0 16:14:08 Filter is already there-color wheel unchanged 16:14:08 Received message from Master: op=Shutter serial=70237 16:14:08 Shutter LASER close 16:14:08 Received message from Camera: op=State serial=70239 16:14:08 GetSingleValue result=40 Value=cccccccc 16:14:08 SkyScan query 16:14:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:14:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:14:08 Parameters OK 16:14:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:14:08 Set A/D data flow result=40 16:14:08 Set A/D channel type result=40 16:14:08 Set A/D encoding result=40 16:14:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:14:08 Set channel filter=0.000000e+000 result=40 16:14:08 Config A/D Result=40 16:14:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:14:08 Get A/D filter: -9.255963e+061 result=40 16:14:08 Get A/D value=-858993460 result=40 16:14:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:14:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:14:08 Parameters OK 16:14:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:14:08 Set A/D data flow result=40 16:14:08 Set A/D channel type result=40 16:14:08 Set A/D encoding result=40 16:14:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:14:08 Set channel filter=0.000000e+000 result=40 16:14:08 Config A/D Result=40 16:14:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:14:08 Get A/D filter: -9.255963e+061 result=40 16:14:08 Get A/D value=-858993460 result=40 16:14:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:14:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:14:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:14:08 Aux= 16:14:08 Message to Camera, serial 70239 queued 16:14:45 Received message from Master: op=PointingHead serial=70252 16:14:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:14:45 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:14:46 Point started: ret=0 16:14:46 point_skyscan result=0 16:14:46 Check angles 16:14:46 SkyScan query 16:14:47 SkyScan query done: ret=0 az=109.44<-7296 ze=38.49<-9434 Statuses=0009 0008 16:14:47 Msec=0 True Az=109.44 Ze=38.49 Az status=0009 Ze status=0008 16:14:47 Check angles 16:14:47 SkyScan query 16:14:48 SkyScan query done: ret=0 az=126.945<-8463 ze=38.505<-9433 Statuses=0009 0008 16:14:48 Msec=750 True Az=126.945 Ze=38.505 Az status=0009 Ze status=0008 16:14:48 Check angles 16:14:48 SkyScan query 16:14:48 SkyScan query done: ret=0 az=144.51<-9634 ze=38.505<-9433 Statuses=0009 0008 16:14:48 Msec=1500 True Az=144.51 Ze=38.505 Az status=0009 Ze status=0008 16:14:49 Check angles 16:14:49 SkyScan query 16:14:49 SkyScan query done: ret=0 az=161.925<-10795 ze=38.505<-9433 Statuses=0009 0008 16:14:49 Msec=2250 True Az=161.925 Ze=38.505 Az status=0009 Ze status=0008 16:14:49 Check angles 16:14:49 SkyScan query 16:14:50 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:14:50 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:14:50 Check angles 16:14:50 SkyScan query 16:14:51 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:14:51 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:14:51 Message to Master queued w/err=0: serial=70252 error=0 16:14:56 Received message from Master: op=Filter serial=70253 16:14:56 Color wheel filter change from 0 to 0 16:14:56 FLIGetFilterPos err=0 currentPosition=0 16:14:56 FLIGetStepsRemaining err=0 RemainingSteps=0 16:14:56 Filter is already there-color wheel unchanged 16:14:56 Received message from Master: op=Shutter serial=70254 16:14:56 Shutter LASER close 16:14:56 Received message from Camera: op=State serial=70256 16:14:56 GetSingleValue result=40 Value=cccccccc 16:14:56 SkyScan query 16:14:56 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:14:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:14:56 Parameters OK 16:14:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:14:56 Set A/D data flow result=40 16:14:56 Set A/D channel type result=40 16:14:56 Set A/D encoding result=40 16:14:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:14:56 Set channel filter=0.000000e+000 result=40 16:14:56 Config A/D Result=40 16:14:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:14:56 Get A/D filter: -9.255963e+061 result=40 16:14:56 Get A/D value=-858993460 result=40 16:14:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:14:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:14:56 Parameters OK 16:14:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:14:56 Set A/D data flow result=40 16:14:56 Set A/D channel type result=40 16:14:56 Set A/D encoding result=40 16:14:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:14:56 Set channel filter=0.000000e+000 result=40 16:14:56 Config A/D Result=40 16:14:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:14:56 Get A/D filter: -9.255963e+061 result=40 16:14:56 Get A/D value=-858993460 result=40 16:14:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:14:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:14:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:14:56 Aux= 16:14:56 Message to Camera, serial 70256 queued 16:15:29 Received message from Master: op=Identify serial=70261 16:15:33 Received message from Master: op=PointingHead serial=70272 16:15:33 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:15:33 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:15:34 Point started: ret=0 16:15:34 point_skyscan result=0 16:15:34 Check angles 16:15:34 SkyScan query 16:15:35 SkyScan query done: ret=0 az=152.79<-10186 ze=8.61<-11426 Statuses=0009 0009 16:15:35 Msec=0 True Az=152.79 Ze=8.61 Az status=0009 Ze status=0009 16:15:35 Check angles 16:15:35 SkyScan query 16:15:36 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.345<-12823 Statuses=0009 0009 16:15:36 Msec=750 True Az=135.42 Ze=-12.345 Az status=0009 Ze status=0009 16:15:36 Check angles 16:15:36 SkyScan query 16:15:36 SkyScan query done: ret=0 az=117.45<-7830 ze=-33.69<-14246 Statuses=0009 0009 16:15:36 Msec=1500 True Az=117.45 Ze=-33.69 Az status=0009 Ze status=0009 16:15:37 Check angles 16:15:37 SkyScan query 16:15:37 SkyScan query done: ret=0 az=100.185<-6679 ze=-51.555<-15437 Statuses=0009 0009 16:15:37 Msec=2250 True Az=100.185 Ze=-51.555 Az status=0009 Ze status=0009 16:15:37 Check angles 16:15:37 SkyScan query 16:15:38 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 16:15:38 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 16:15:38 Check angles 16:15:38 SkyScan query 16:15:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:15:39 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:15:39 Message to Master queued w/err=0: serial=70272 error=0 16:15:44 Received message from Master: op=Filter serial=70273 16:15:44 Color wheel filter change from 0 to 0 16:15:44 FLIGetFilterPos err=0 currentPosition=0 16:15:44 FLIGetStepsRemaining err=0 RemainingSteps=0 16:15:44 Filter is already there-color wheel unchanged 16:15:44 Received message from Master: op=Shutter serial=70274 16:15:44 Shutter LASER close 16:15:44 Received message from Camera: op=State serial=70276 16:15:44 GetSingleValue result=40 Value=cccccccc 16:15:44 SkyScan query 16:15:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:15:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:15:45 Parameters OK 16:15:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:15:45 Set A/D data flow result=40 16:15:45 Set A/D channel type result=40 16:15:45 Set A/D encoding result=40 16:15:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:15:45 Set channel filter=0.000000e+000 result=40 16:15:45 Config A/D Result=40 16:15:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:15:45 Get A/D filter: -9.255963e+061 result=40 16:15:45 Get A/D value=-858993460 result=40 16:15:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:15:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:15:45 Parameters OK 16:15:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:15:45 Set A/D data flow result=40 16:15:45 Set A/D channel type result=40 16:15:45 Set A/D encoding result=40 16:15:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:15:45 Set channel filter=0.000000e+000 result=40 16:15:45 Config A/D Result=40 16:15:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:15:45 Get A/D filter: -9.255963e+061 result=40 16:15:45 Get A/D value=-858993460 result=40 16:15:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:15:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:15:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:15:45 Aux= 16:15:45 Message to Camera, serial 70276 queued [UTC 2018-12-11 16:15:54] 16:16:21 Received message from Master: op=PointingHead serial=70289 16:16:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:16:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:16:22 Point started: ret=0 16:16:22 point_skyscan result=0 16:16:23 Check angles 16:16:23 SkyScan query 16:16:23 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.06<-17404 Statuses=0009 0009 16:16:23 Msec=0 True Az=108.825 Ze=-81.06 Az status=0009 Ze status=0009 16:16:23 Check angles 16:16:23 SkyScan query 16:16:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.03<-18802 Statuses=0008 0009 16:16:24 Msec=750 True Az=112.995 Ze=-102.03 Az status=0008 Ze status=0009 16:16:24 Check angles 16:16:24 SkyScan query 16:16:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.405<-20227 Statuses=0008 0009 16:16:25 Msec=1500 True Az=112.995 Ze=-123.405 Az status=0008 Ze status=0009 16:16:25 Check angles 16:16:25 SkyScan query 16:16:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.36<-21624 Statuses=0008 0009 16:16:25 Msec=2250 True Az=112.995 Ze=-144.36 Az status=0008 Ze status=0009 16:16:26 Check angles 16:16:26 SkyScan query 16:16:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.315<-23021 Statuses=0008 0009 16:16:26 Msec=3000 True Az=112.995 Ze=-165.315 Az status=0008 Ze status=0009 16:16:26 Check angles 16:16:26 SkyScan query 16:16:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:16:27 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:16:27 Message to Master queued w/err=0: serial=70289 error=0 16:16:32 Received message from Master: op=Filter serial=70290 16:16:32 Color wheel filter change from 0 to 0 16:16:32 FLIGetFilterPos err=0 currentPosition=0 16:16:32 FLIGetStepsRemaining err=0 RemainingSteps=0 16:16:32 Filter is already there-color wheel unchanged 16:16:32 Received message from Master: op=Shutter serial=70291 16:16:32 Shutter LASER open 16:16:32 Received message from Camera: op=State serial=70293 16:16:32 GetSingleValue result=40 Value=cccccccc 16:16:32 SkyScan query 16:16:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:16:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:33 Parameters OK 16:16:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:33 Set A/D data flow result=40 16:16:33 Set A/D channel type result=40 16:16:33 Set A/D encoding result=40 16:16:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:33 Set channel filter=0.000000e+000 result=40 16:16:33 Config A/D Result=40 16:16:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:33 Get A/D filter: -9.255963e+061 result=40 16:16:33 Get A/D value=-858993460 result=40 16:16:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:33 Parameters OK 16:16:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:33 Set A/D data flow result=40 16:16:33 Set A/D channel type result=40 16:16:33 Set A/D encoding result=40 16:16:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:33 Set channel filter=0.000000e+000 result=40 16:16:33 Config A/D Result=40 16:16:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:33 Get A/D filter: -9.255963e+061 result=40 16:16:33 Get A/D value=-858993460 result=40 16:16:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:16:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:16:33 Aux= 16:16:33 Message to Camera, serial 70293 queued 16:16:41 Received message from Master: op=Shutter serial=70303 16:16:41 Shutter LASER close 16:16:42 Received message from Master: op=PointingHead serial=70307 16:16:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:16:42 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:16:42 Point started: ret=0 16:16:42 point_skyscan result=0 16:16:43 Check angles 16:16:43 SkyScan query 16:16:43 SkyScan query done: ret=0 az=90.135<-6009 ze=157.515<-1499 Statuses=0009 0009 16:16:43 Msec=0 True Az=90.135 Ze=157.515 Az status=0009 Ze status=0009 16:16:44 Check angles 16:16:44 SkyScan query 16:16:44 SkyScan query done: ret=0 az=72.705<-4847 ze=136.53<-2898 Statuses=0009 0009 16:16:44 Msec=750 True Az=72.705 Ze=136.53 Az status=0009 Ze status=0009 16:16:44 Check angles 16:16:44 SkyScan query 16:16:45 SkyScan query done: ret=0 az=55.11<-3674 ze=115.62<-4292 Statuses=0009 0009 16:16:45 Msec=1500 True Az=55.11 Ze=115.62 Az status=0009 Ze status=0009 16:16:45 Check angles 16:16:45 SkyScan query 16:16:46 SkyScan query done: ret=0 az=40.86<-2724 ze=94.62<-5692 Statuses=0009 0009 16:16:46 Msec=2250 True Az=40.86 Ze=94.62 Az status=0009 Ze status=0009 16:16:46 Check angles 16:16:46 SkyScan query 16:16:46 SkyScan query done: ret=0 az=40.995<-2733 ze=73.695<-7087 Statuses=0008 0009 16:16:46 Msec=3000 True Az=40.995 Ze=73.695 Az status=0008 Ze status=0009 16:16:47 Check angles 16:16:47 SkyScan query 16:16:47 SkyScan query done: ret=0 az=40.995<-2733 ze=52.995<-8467 Statuses=0008 0009 16:16:47 Msec=3750 True Az=40.995 Ze=52.995 Az status=0008 Ze status=0009 16:16:47 Check angles 16:16:47 SkyScan query 16:16:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:16:48 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:16:48 Message to Master queued w/err=0: serial=70307 error=0 16:16:53 Received message from Master: op=Filter serial=70308 16:16:53 Color wheel filter change from 0 to 0 16:16:53 FLIGetFilterPos err=0 currentPosition=0 16:16:53 FLIGetStepsRemaining err=0 RemainingSteps=0 16:16:53 Filter is already there-color wheel unchanged 16:16:53 Received message from Master: op=Shutter serial=70309 16:16:53 Shutter LASER close 16:16:53 Received message from Camera: op=State serial=70311 16:16:53 GetSingleValue result=40 Value=cccccccc 16:16:53 SkyScan query 16:16:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:16:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:54 Parameters OK 16:16:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:54 Set A/D data flow result=40 16:16:54 Set A/D channel type result=40 16:16:54 Set A/D encoding result=40 16:16:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:54 Set channel filter=0.000000e+000 result=40 16:16:54 Config A/D Result=40 16:16:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:54 Get A/D filter: -9.255963e+061 result=40 16:16:54 Get A/D value=-858993460 result=40 16:16:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:54 Parameters OK 16:16:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:54 Set A/D data flow result=40 16:16:54 Set A/D channel type result=40 16:16:54 Set A/D encoding result=40 16:16:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:54 Set channel filter=0.000000e+000 result=40 16:16:54 Config A/D Result=40 16:16:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:54 Get A/D filter: -9.255963e+061 result=40 16:16:54 Get A/D value=-858993460 result=40 16:16:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:16:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:16:54 Aux= 16:16:54 Message to Camera, serial 70311 queued 16:17:31 Received message from Master: op=PointingHead serial=70324 16:17:31 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:17:31 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:17:31 Point started: ret=0 16:17:31 point_skyscan result=0 16:17:32 Check angles 16:17:32 SkyScan query 16:17:32 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 16:17:32 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 16:17:33 Check angles 16:17:33 SkyScan query 16:17:33 SkyScan query done: ret=0 az=81.57<-5438 ze=66.495<-7567 Statuses=0009 0008 16:17:33 Msec=750 True Az=81.57 Ze=66.495 Az status=0009 Ze status=0008 16:17:33 Check angles 16:17:33 SkyScan query 16:17:34 SkyScan query done: ret=0 az=99.795<-6653 ze=66.495<-7567 Statuses=0009 0008 16:17:34 Msec=1500 True Az=99.795 Ze=66.495 Az status=0009 Ze status=0008 16:17:34 Check angles 16:17:34 SkyScan query 16:17:35 SkyScan query done: ret=0 az=117.09<-7806 ze=66.495<-7567 Statuses=0009 0008 16:17:35 Msec=2250 True Az=117.09 Ze=66.495 Az status=0009 Ze status=0008 16:17:35 Check angles 16:17:35 SkyScan query 16:17:35 SkyScan query done: ret=0 az=134.55<-8970 ze=66.495<-7567 Statuses=0009 0008 16:17:35 Msec=3000 True Az=134.55 Ze=66.495 Az status=0009 Ze status=0008 16:17:36 Check angles 16:17:36 SkyScan query 16:17:36 SkyScan query done: ret=0 az=152.34<-10156 ze=66.495<-7567 Statuses=0009 0008 16:17:36 Msec=3750 True Az=152.34 Ze=66.495 Az status=0009 Ze status=0008 16:17:36 Check angles 16:17:36 SkyScan query 16:17:37 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 16:17:37 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 16:17:37 Message to Master queued w/err=0: serial=70324 error=0 16:17:42 Received message from Master: op=Filter serial=70325 16:17:42 Color wheel filter change from 0 to 0 16:17:42 FLIGetFilterPos err=0 currentPosition=0 16:17:42 FLIGetStepsRemaining err=0 RemainingSteps=0 16:17:42 Filter is already there-color wheel unchanged 16:17:42 Received message from Master: op=Shutter serial=70326 16:17:42 Shutter LASER close 16:17:42 Received message from Camera: op=State serial=70328 16:17:42 GetSingleValue result=40 Value=cccccccc 16:17:42 SkyScan query 16:17:43 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:17:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:17:43 Parameters OK 16:17:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:17:43 Set A/D data flow result=40 16:17:43 Set A/D channel type result=40 16:17:43 Set A/D encoding result=40 16:17:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:17:43 Set channel filter=0.000000e+000 result=40 16:17:43 Config A/D Result=40 16:17:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:17:43 Get A/D filter: -9.255963e+061 result=40 16:17:43 Get A/D value=-858993460 result=40 16:17:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:17:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:17:43 Parameters OK 16:17:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:17:43 Set A/D data flow result=40 16:17:43 Set A/D channel type result=40 16:17:43 Set A/D encoding result=40 16:17:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:17:43 Set channel filter=0.000000e+000 result=40 16:17:43 Config A/D Result=40 16:17:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:17:43 Get A/D filter: -9.255963e+061 result=40 16:17:43 Get A/D value=-858993460 result=40 16:17:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:17:43 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:17:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:17:43 Aux= 16:17:43 Message to Camera, serial 70328 queued 16:18:20 Received message from Master: op=PointingHead serial=70341 16:18:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:18:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:18:20 Point started: ret=0 16:18:20 point_skyscan result=0 16:18:21 Check angles 16:18:21 SkyScan query 16:18:21 SkyScan query done: ret=0 az=134.985<-8999 ze=36.66<-9556 Statuses=0009 0009 16:18:21 Msec=0 True Az=134.985 Ze=36.66 Az status=0009 Ze status=0009 16:18:21 Check angles 16:18:21 SkyScan query 16:18:22 SkyScan query done: ret=0 az=117.09<-7806 ze=15.33<-10978 Statuses=0009 0009 16:18:22 Msec=750 True Az=117.09 Ze=15.33 Az status=0009 Ze status=0009 16:18:22 Check angles 16:18:22 SkyScan query 16:18:23 SkyScan query done: ret=0 az=99.795<-6653 ze=-5.655<-12377 Statuses=0009 0009 16:18:23 Msec=1500 True Az=99.795 Ze=-5.655 Az status=0009 Ze status=0009 16:18:23 Check angles 16:18:23 SkyScan query 16:18:23 SkyScan query done: ret=0 az=82.245<-5483 ze=-26.61<-13774 Statuses=0009 0009 16:18:23 Msec=2250 True Az=82.245 Ze=-26.61 Az status=0009 Ze status=0009 16:18:24 Check angles 16:18:24 SkyScan query 16:18:24 SkyScan query done: ret=0 az=64.395<-4293 ze=-38.565<-14571 Statuses=0009 0008 16:18:24 Msec=3000 True Az=64.395 Ze=-38.565 Az status=0009 Ze status=0008 16:18:24 Check angles 16:18:24 SkyScan query 16:18:25 SkyScan query done: ret=0 az=46.995<-3133 ze=-38.535<-14569 Statuses=0009 0008 16:18:25 Msec=3750 True Az=46.995 Ze=-38.535 Az status=0009 Ze status=0008 16:18:25 Check angles 16:18:25 SkyScan query 16:18:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:18:26 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:18:26 Message to Master queued w/err=0: serial=70341 error=0 16:18:31 Received message from Master: op=Filter serial=70342 16:18:31 Color wheel filter change from 0 to 0 16:18:31 FLIGetFilterPos err=0 currentPosition=0 16:18:31 FLIGetStepsRemaining err=0 RemainingSteps=0 16:18:31 Filter is already there-color wheel unchanged 16:18:31 Received message from Master: op=Shutter serial=70343 16:18:31 Shutter LASER close 16:18:31 Received message from Camera: op=State serial=70345 16:18:31 GetSingleValue result=40 Value=cccccccc 16:18:31 SkyScan query 16:18:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:18:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:18:32 Parameters OK 16:18:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:18:32 Set A/D data flow result=40 16:18:32 Set A/D channel type result=40 16:18:32 Set A/D encoding result=40 16:18:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:18:32 Set channel filter=0.000000e+000 result=40 16:18:32 Config A/D Result=40 16:18:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:18:32 Get A/D filter: -9.255963e+061 result=40 16:18:32 Get A/D value=-858993460 result=40 16:18:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:18:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:18:32 Parameters OK 16:18:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:18:32 Set A/D data flow result=40 16:18:32 Set A/D channel type result=40 16:18:32 Set A/D encoding result=40 16:18:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:18:32 Set channel filter=0.000000e+000 result=40 16:18:32 Config A/D Result=40 16:18:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:18:32 Get A/D filter: -9.255963e+061 result=40 16:18:32 Get A/D value=-858993460 result=40 16:18:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:18:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:18:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:18:32 Aux= 16:18:32 Message to Camera, serial 70345 queued 16:19:08 Received message from Master: op=PointingHead serial=70358 16:19:08 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:19:08 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:19:09 Point started: ret=0 16:19:09 point_skyscan result=0 16:19:10 Check angles 16:19:10 SkyScan query 16:19:10 SkyScan query done: ret=0 az=64.095<-4273 ze=-68.34<-16556 Statuses=0009 0009 16:19:10 Msec=0 True Az=64.095 Ze=-68.34 Az status=0009 Ze status=0009 16:19:10 Check angles 16:19:10 SkyScan query 16:19:11 SkyScan query done: ret=0 az=81.81<-5454 ze=-89.775<-17985 Statuses=0009 0009 16:19:11 Msec=750 True Az=81.81 Ze=-89.775 Az status=0009 Ze status=0009 16:19:11 Check angles 16:19:11 SkyScan query 16:19:12 SkyScan query done: ret=0 az=99.45<-6630 ze=-110.73<-19382 Statuses=0009 0009 16:19:12 Msec=1500 True Az=99.45 Ze=-110.73 Az status=0009 Ze status=0009 16:19:12 Check angles 16:19:12 SkyScan query 16:19:12 SkyScan query done: ret=0 az=116.97<-7798 ze=-131.655<-20777 Statuses=0009 0009 16:19:12 Msec=2250 True Az=116.97 Ze=-131.655 Az status=0009 Ze status=0009 16:19:13 Check angles 16:19:13 SkyScan query 16:19:13 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 16:19:13 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 16:19:13 Check angles 16:19:13 SkyScan query 16:19:14 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:19:14 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:19:14 Message to Master queued w/err=0: serial=70358 error=0 16:19:19 Received message from Master: op=Filter serial=70359 16:19:19 Color wheel filter change from 0 to 0 16:19:19 FLIGetFilterPos err=0 currentPosition=0 16:19:19 FLIGetStepsRemaining err=0 RemainingSteps=0 16:19:19 Filter is already there-color wheel unchanged 16:19:19 Received message from Master: op=Shutter serial=70360 16:19:19 Shutter LASER close 16:19:19 Received message from Camera: op=State serial=70362 16:19:19 GetSingleValue result=40 Value=cccccccc 16:19:19 SkyScan query 16:19:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:19:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:19:20 Parameters OK 16:19:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:19:20 Set A/D data flow result=40 16:19:20 Set A/D channel type result=40 16:19:20 Set A/D encoding result=40 16:19:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:19:20 Set channel filter=0.000000e+000 result=40 16:19:20 Config A/D Result=40 16:19:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:19:20 Get A/D filter: -9.255963e+061 result=40 16:19:20 Get A/D value=-858993460 result=40 16:19:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:19:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:19:20 Parameters OK 16:19:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:19:20 Set A/D data flow result=40 16:19:20 Set A/D channel type result=40 16:19:20 Set A/D encoding result=40 16:19:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:19:20 Set channel filter=0.000000e+000 result=40 16:19:20 Config A/D Result=40 16:19:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:19:20 Get A/D filter: -9.255963e+061 result=40 16:19:20 Get A/D value=-858993460 result=40 16:19:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:19:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:19:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:19:20 Aux= 16:19:20 Message to Camera, serial 70362 queued 16:19:57 Received message from Master: op=PointingHead serial=70375 16:19:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:19:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:19:57 Point started: ret=0 16:19:57 point_skyscan result=0 16:19:58 Check angles 16:19:58 SkyScan query 16:19:58 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.39<-23426 Statuses=0009 0009 16:19:58 Msec=0 True Az=113.01 Ze=-171.39 Az status=0009 Ze status=0009 16:19:58 Check angles 16:19:58 SkyScan query 16:19:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:19:59 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:19:59 Message to Master queued w/err=0: serial=70375 error=0 16:20:04 Received message from Master: op=Filter serial=70376 16:20:04 Color wheel filter change from 0 to 0 16:20:04 FLIGetFilterPos err=0 currentPosition=0 16:20:04 FLIGetStepsRemaining err=0 RemainingSteps=0 16:20:04 Filter is already there-color wheel unchanged 16:20:04 Received message from Master: op=Shutter serial=70377 16:20:04 Shutter LASER open 16:20:04 Received message from Camera: op=State serial=70379 16:20:04 GetSingleValue result=40 Value=cccccccc 16:20:04 SkyScan query 16:20:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:20:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:20:05 Parameters OK 16:20:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:20:05 Set A/D data flow result=40 16:20:05 Set A/D channel type result=40 16:20:05 Set A/D encoding result=40 16:20:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:20:05 Set channel filter=0.000000e+000 result=40 16:20:05 Config A/D Result=40 16:20:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:20:05 Get A/D filter: -9.255963e+061 result=40 16:20:05 Get A/D value=-858993460 result=40 16:20:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:20:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:20:05 Parameters OK 16:20:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:20:05 Set A/D data flow result=40 16:20:05 Set A/D channel type result=40 16:20:05 Set A/D encoding result=40 16:20:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:20:05 Set channel filter=0.000000e+000 result=40 16:20:05 Config A/D Result=40 16:20:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:20:05 Get A/D filter: -9.255963e+061 result=40 16:20:05 Get A/D value=-858993460 result=40 16:20:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:20:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:20:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:20:05 Aux= 16:20:05 Message to Camera, serial 70379 queued 16:20:12 Received message from Master: op=Shutter serial=70388 16:20:12 Shutter LASER close 16:20:13 Received message from Master: op=PointingHead serial=70392 16:20:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:20:13 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:20:13 Point started: ret=0 16:20:13 point_skyscan result=0 16:20:14 Check angles 16:20:14 SkyScan query 16:20:15 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.115<-21541 Statuses=0009 0009 16:20:15 Msec=0 True Az=135.945 Ze=-143.115 Az status=0009 Ze status=0009 16:20:15 Check angles 16:20:15 SkyScan query 16:20:15 SkyScan query done: ret=0 az=153.54<-10236 ze=-122.235<-20149 Statuses=0009 0009 16:20:15 Msec=750 True Az=153.54 Ze=-122.235 Az status=0009 Ze status=0009 16:20:16 Check angles 16:20:16 SkyScan query 16:20:16 SkyScan query done: ret=0 az=170.895<-11393 ze=-101.355<-18757 Statuses=0009 0009 16:20:16 Msec=1500 True Az=170.895 Ze=-101.355 Az status=0009 Ze status=0009 16:20:16 Check angles 16:20:16 SkyScan query 16:20:17 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.34<-17356 Statuses=0008 0009 16:20:17 Msec=2250 True Az=176.025 Ze=-80.34 Az status=0008 Ze status=0009 16:20:17 Check angles 16:20:17 SkyScan query 16:20:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.95<-15930 Statuses=0008 0009 16:20:18 Msec=3000 True Az=175.995 Ze=-58.95 Az status=0008 Ze status=0009 16:20:18 Check angles 16:20:18 SkyScan query 16:20:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:20:18 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:20:18 Message to Master queued w/err=0: serial=70392 error=0 16:20:23 Received message from Master: op=Filter serial=70393 16:20:23 Color wheel filter change from 0 to 0 16:20:23 FLIGetFilterPos err=0 currentPosition=0 16:20:23 FLIGetStepsRemaining err=0 RemainingSteps=0 16:20:23 Filter is already there-color wheel unchanged 16:20:24 Received message from Master: op=Shutter serial=70394 16:20:24 Shutter LASER close 16:20:24 Received message from Camera: op=State serial=70396 16:20:24 GetSingleValue result=40 Value=cccccccc 16:20:24 SkyScan query 16:20:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:20:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:20:24 Parameters OK 16:20:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:20:24 Set A/D data flow result=40 16:20:24 Set A/D channel type result=40 16:20:24 Set A/D encoding result=40 16:20:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:20:24 Set channel filter=0.000000e+000 result=40 16:20:24 Config A/D Result=40 16:20:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:20:24 Get A/D filter: -9.255963e+061 result=40 16:20:24 Get A/D value=-858993460 result=40 16:20:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:20:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:20:24 Parameters OK 16:20:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:20:24 Set A/D data flow result=40 16:20:24 Set A/D channel type result=40 16:20:24 Set A/D encoding result=40 16:20:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:20:24 Set channel filter=0.000000e+000 result=40 16:20:24 Config A/D Result=40 16:20:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:20:24 Get A/D filter: -9.255963e+061 result=40 16:20:24 Get A/D value=-858993460 result=40 16:20:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:20:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:20:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:20:24 Aux= 16:20:24 Message to Camera, serial 70396 queued 16:21:01 Received message from Master: op=PointingHead serial=70409 16:21:01 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:21:01 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:21:01 Point started: ret=0 16:21:01 point_skyscan result=0 16:21:02 Check angles 16:21:02 SkyScan query 16:21:03 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.975<-13465 Statuses=0009 0009 16:21:03 Msec=0 True Az=152.955 Ze=-21.975 Az status=0009 Ze status=0009 16:21:03 Check angles 16:21:03 SkyScan query 16:21:04 SkyScan query done: ret=0 az=135.21<-9014 ze=-0.525<-12035 Statuses=0009 0009 16:21:04 Msec=750 True Az=135.21 Ze=-0.525 Az status=0009 Ze status=0009 16:21:04 Check angles 16:21:04 SkyScan query 16:21:04 SkyScan query done: ret=0 az=117.54<-7836 ze=20.4<-10640 Statuses=0009 0009 16:21:04 Msec=1500 True Az=117.54 Ze=20.4 Az status=0009 Ze status=0009 16:21:05 Check angles 16:21:05 SkyScan query 16:21:05 SkyScan query done: ret=0 az=100.155<-6677 ze=41.4<-9240 Statuses=0009 0009 16:21:05 Msec=2250 True Az=100.155 Ze=41.4 Az status=0009 Ze status=0009 16:21:05 Check angles 16:21:05 SkyScan query 16:21:06 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 16:21:06 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 16:21:06 Check angles 16:21:06 SkyScan query 16:21:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:21:07 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:21:07 Message to Master queued w/err=0: serial=70409 error=0 16:21:12 Received message from Master: op=Filter serial=70410 16:21:12 Color wheel filter change from 0 to 0 16:21:12 FLIGetFilterPos err=0 currentPosition=0 16:21:12 FLIGetStepsRemaining err=0 RemainingSteps=0 16:21:12 Filter is already there-color wheel unchanged 16:21:12 Received message from Master: op=Shutter serial=70411 16:21:12 Shutter LASER close 16:21:12 Received message from Camera: op=State serial=70413 16:21:12 GetSingleValue result=40 Value=cccccccc 16:21:12 SkyScan query 16:21:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:21:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:21:12 Parameters OK 16:21:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:21:12 Set A/D data flow result=40 16:21:12 Set A/D channel type result=40 16:21:12 Set A/D encoding result=40 16:21:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:21:12 Set channel filter=0.000000e+000 result=40 16:21:12 Config A/D Result=40 16:21:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:21:12 Get A/D filter: -9.255963e+061 result=40 16:21:12 Get A/D value=-858993460 result=40 16:21:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:21:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:21:12 Parameters OK 16:21:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:21:12 Set A/D data flow result=40 16:21:12 Set A/D channel type result=40 16:21:12 Set A/D encoding result=40 16:21:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:21:12 Set channel filter=0.000000e+000 result=40 16:21:12 Config A/D Result=40 16:21:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:21:12 Get A/D filter: -9.255963e+061 result=40 16:21:12 Get A/D value=-858993460 result=40 16:21:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:21:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:21:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:21:12 Aux= 16:21:12 Message to Camera, serial 70413 queued 16:21:48 Received message from Master: op=PointingHead serial=70425 16:21:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:21:48 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:21:49 Point started: ret=0 16:21:49 point_skyscan result=0 16:21:49 Check angles 16:21:49 SkyScan query 16:21:50 SkyScan query done: ret=0 az=108.93<-7262 ze=38.49<-9434 Statuses=0009 0008 16:21:50 Msec=0 True Az=108.93 Ze=38.49 Az status=0009 Ze status=0008 16:21:50 Check angles 16:21:50 SkyScan query 16:21:51 SkyScan query done: ret=0 az=126.48<-8432 ze=38.505<-9433 Statuses=0009 0008 16:21:51 Msec=750 True Az=126.48 Ze=38.505 Az status=0009 Ze status=0008 16:21:51 Check angles 16:21:51 SkyScan query 16:21:51 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 16:21:51 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 16:21:52 Check angles 16:21:52 SkyScan query 16:21:52 SkyScan query done: ret=0 az=161.685<-10779 ze=38.505<-9433 Statuses=0009 0008 16:21:52 Msec=2250 True Az=161.685 Ze=38.505 Az status=0009 Ze status=0008 16:21:52 Check angles 16:21:52 SkyScan query 16:21:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 16:21:53 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 16:21:53 Check angles 16:21:53 SkyScan query 16:21:54 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:21:54 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:21:54 Message to Master queued w/err=0: serial=70425 error=0 16:21:59 Received message from Master: op=Filter serial=70426 16:21:59 Color wheel filter change from 0 to 0 16:21:59 FLIGetFilterPos err=0 currentPosition=0 16:21:59 FLIGetStepsRemaining err=0 RemainingSteps=0 16:21:59 Filter is already there-color wheel unchanged 16:21:59 Received message from Master: op=Shutter serial=70427 16:21:59 Shutter LASER close 16:21:59 Received message from Camera: op=State serial=70429 16:21:59 GetSingleValue result=40 Value=cccccccc 16:21:59 SkyScan query 16:22:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:22:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:22:00 Parameters OK 16:22:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:22:00 Set A/D data flow result=40 16:22:00 Set A/D channel type result=40 16:22:00 Set A/D encoding result=40 16:22:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:22:00 Set channel filter=0.000000e+000 result=40 16:22:00 Config A/D Result=40 16:22:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:22:00 Get A/D filter: -9.255963e+061 result=40 16:22:00 Get A/D value=-858993460 result=40 16:22:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:22:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:22:00 Parameters OK 16:22:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:22:00 Set A/D data flow result=40 16:22:00 Set A/D channel type result=40 16:22:00 Set A/D encoding result=40 16:22:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:22:00 Set channel filter=0.000000e+000 result=40 16:22:00 Config A/D Result=40 16:22:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:22:00 Get A/D filter: -9.255963e+061 result=40 16:22:00 Get A/D value=-858993460 result=40 16:22:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:22:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:22:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:22:00 Aux= 16:22:00 Message to Camera, serial 70429 queued 16:22:36 Received message from Master: op=PointingHead serial=70442 16:22:36 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:22:36 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:22:37 Point started: ret=0 16:22:37 point_skyscan result=0 16:22:37 Check angles 16:22:37 SkyScan query 16:22:38 SkyScan query done: ret=0 az=152.955<-10197 ze=8.61<-11426 Statuses=0009 0009 16:22:38 Msec=0 True Az=152.955 Ze=8.61 Az status=0009 Ze status=0009 16:22:38 Check angles 16:22:38 SkyScan query 16:22:39 SkyScan query done: ret=0 az=135.195<-9013 ze=-12.765<-12851 Statuses=0009 0009 16:22:39 Msec=750 True Az=135.195 Ze=-12.765 Az status=0009 Ze status=0009 16:22:39 Check angles 16:22:39 SkyScan query 16:22:40 SkyScan query done: ret=0 az=117.24<-7816 ze=-34.185<-14279 Statuses=0009 0009 16:22:40 Msec=1500 True Az=117.24 Ze=-34.185 Az status=0009 Ze status=0009 16:22:40 Check angles 16:22:40 SkyScan query 16:22:40 SkyScan query done: ret=0 az=99.93<-6662 ze=-51.57<-15438 Statuses=0009 0009 16:22:40 Msec=2250 True Az=99.93 Ze=-51.57 Az status=0009 Ze status=0009 16:22:41 Check angles 16:22:41 SkyScan query 16:22:41 SkyScan query done: ret=0 az=85.965<-5731 ze=-51.54<-15436 Statuses=0009 0008 16:22:41 Msec=3000 True Az=85.965 Ze=-51.54 Az status=0009 Ze status=0008 16:22:41 Check angles 16:22:41 SkyScan query 16:22:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:22:42 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:22:42 Message to Master queued w/err=0: serial=70442 error=0 16:22:47 Received message from Master: op=Filter serial=70443 16:22:47 Color wheel filter change from 0 to 0 16:22:47 FLIGetFilterPos err=0 currentPosition=0 16:22:47 FLIGetStepsRemaining err=0 RemainingSteps=0 16:22:47 Filter is already there-color wheel unchanged 16:22:47 Received message from Master: op=Shutter serial=70444 16:22:47 Shutter LASER close 16:22:47 Received message from Camera: op=State serial=70446 16:22:47 GetSingleValue result=40 Value=cccccccc 16:22:47 SkyScan query 16:22:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:22:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:22:48 Parameters OK 16:22:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:22:48 Set A/D data flow result=40 16:22:48 Set A/D channel type result=40 16:22:48 Set A/D encoding result=40 16:22:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:22:48 Set channel filter=0.000000e+000 result=40 16:22:48 Config A/D Result=40 16:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:22:48 Get A/D filter: -9.255963e+061 result=40 16:22:48 Get A/D value=-858993460 result=40 16:22:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:22:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:22:48 Parameters OK 16:22:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:22:48 Set A/D data flow result=40 16:22:48 Set A/D channel type result=40 16:22:48 Set A/D encoding result=40 16:22:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:22:48 Set channel filter=0.000000e+000 result=40 16:22:48 Config A/D Result=40 16:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:22:48 Get A/D filter: -9.255963e+061 result=40 16:22:48 Get A/D value=-858993460 result=40 16:22:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:22:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:22:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:22:48 Aux= 16:22:48 Message to Camera, serial 70446 queued 16:23:24 Received message from Master: op=PointingHead serial=70459 16:23:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:23:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:23:25 Point started: ret=0 16:23:25 point_skyscan result=0 16:23:26 Check angles 16:23:26 SkyScan query 16:23:26 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.315<-17421 Statuses=0009 0009 16:23:26 Msec=0 True Az=108.99 Ze=-81.315 Az status=0009 Ze status=0009 16:23:26 Check angles 16:23:26 SkyScan query 16:23:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.27<-18818 Statuses=0008 0009 16:23:27 Msec=750 True Az=112.995 Ze=-102.27 Az status=0008 Ze status=0009 16:23:27 Check angles 16:23:27 SkyScan query 16:23:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.72<-20248 Statuses=0008 0009 16:23:28 Msec=1500 True Az=112.995 Ze=-123.72 Az status=0008 Ze status=0009 16:23:28 Check angles 16:23:28 SkyScan query 16:23:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.615<-21641 Statuses=0008 0009 16:23:28 Msec=2250 True Az=112.995 Ze=-144.615 Az status=0008 Ze status=0009 16:23:29 Check angles 16:23:29 SkyScan query 16:23:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.57<-23038 Statuses=0008 0009 16:23:29 Msec=3000 True Az=112.995 Ze=-165.57 Az status=0008 Ze status=0009 16:23:29 Check angles 16:23:29 SkyScan query 16:23:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:23:30 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:23:30 Message to Master queued w/err=0: serial=70459 error=0 16:23:35 Received message from Master: op=Filter serial=70460 16:23:35 Color wheel filter change from 0 to 0 16:23:35 FLIGetFilterPos err=0 currentPosition=0 16:23:35 FLIGetStepsRemaining err=0 RemainingSteps=0 16:23:35 Filter is already there-color wheel unchanged 16:23:35 Received message from Master: op=Shutter serial=70461 16:23:35 Shutter LASER open 16:23:35 Received message from Camera: op=State serial=70463 16:23:35 GetSingleValue result=40 Value=cccccccc 16:23:35 SkyScan query 16:23:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:23:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:36 Parameters OK 16:23:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:36 Set A/D data flow result=40 16:23:36 Set A/D channel type result=40 16:23:36 Set A/D encoding result=40 16:23:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:36 Set channel filter=0.000000e+000 result=40 16:23:36 Config A/D Result=40 16:23:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:36 Get A/D filter: -9.255963e+061 result=40 16:23:36 Get A/D value=-858993460 result=40 16:23:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:36 Parameters OK 16:23:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:36 Set A/D data flow result=40 16:23:36 Set A/D channel type result=40 16:23:36 Set A/D encoding result=40 16:23:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:36 Set channel filter=0.000000e+000 result=40 16:23:36 Config A/D Result=40 16:23:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:36 Get A/D filter: -9.255963e+061 result=40 16:23:36 Get A/D value=-858993460 result=40 16:23:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:23:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:23:36 Aux= 16:23:36 Message to Camera, serial 70463 queued 16:23:44 Received message from Master: op=Shutter serial=70473 16:23:44 Shutter LASER close 16:23:45 Received message from Master: op=PointingHead serial=70477 16:23:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:23:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:23:45 Point started: ret=0 16:23:45 point_skyscan result=0 16:23:46 Check angles 16:23:46 SkyScan query 16:23:46 SkyScan query done: ret=0 az=89.895<-5993 ze=157.26<-1516 Statuses=0009 0009 16:23:46 Msec=0 True Az=89.895 Ze=157.26 Az status=0009 Ze status=0009 16:23:47 Check angles 16:23:47 SkyScan query 16:23:47 SkyScan query done: ret=0 az=72.03<-4802 ze=135.87<-2942 Statuses=0009 0009 16:23:47 Msec=750 True Az=72.03 Ze=135.87 Az status=0009 Ze status=0009 16:23:47 Check angles 16:23:47 SkyScan query 16:23:48 SkyScan query done: ret=0 az=54.81<-3654 ze=114.9<-4340 Statuses=0009 0009 16:23:48 Msec=1500 True Az=54.81 Ze=114.9 Az status=0009 Ze status=0009 16:23:48 Check angles 16:23:48 SkyScan query 16:23:49 SkyScan query done: ret=0 az=40.89<-2726 ze=93.945<-5737 Statuses=0009 0009 16:23:49 Msec=2250 True Az=40.89 Ze=93.945 Az status=0009 Ze status=0009 16:23:49 Check angles 16:23:49 SkyScan query 16:23:49 SkyScan query done: ret=0 az=40.995<-2733 ze=72.975<-7135 Statuses=0008 0009 16:23:49 Msec=3000 True Az=40.995 Ze=72.975 Az status=0008 Ze status=0009 16:23:50 Check angles 16:23:50 SkyScan query 16:23:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.56<-8496 Statuses=0008 0009 16:23:50 Msec=3750 True Az=40.995 Ze=52.56 Az status=0008 Ze status=0009 16:23:50 Check angles 16:23:50 SkyScan query 16:23:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:23:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:23:51 Message to Master queued w/err=0: serial=70477 error=0 16:23:56 Received message from Master: op=Filter serial=70478 16:23:56 Color wheel filter change from 0 to 0 16:23:56 FLIGetFilterPos err=0 currentPosition=0 16:23:56 FLIGetStepsRemaining err=0 RemainingSteps=0 16:23:56 Filter is already there-color wheel unchanged 16:23:56 Received message from Master: op=Shutter serial=70479 16:23:56 Shutter LASER close 16:23:56 Received message from Camera: op=State serial=70481 16:23:56 GetSingleValue result=40 Value=cccccccc 16:23:56 SkyScan query 16:23:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:23:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:57 Parameters OK 16:23:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:57 Set A/D data flow result=40 16:23:57 Set A/D channel type result=40 16:23:57 Set A/D encoding result=40 16:23:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:57 Set channel filter=0.000000e+000 result=40 16:23:57 Config A/D Result=40 16:23:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:57 Get A/D filter: -9.255963e+061 result=40 16:23:57 Get A/D value=-858993460 result=40 16:23:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:57 Parameters OK 16:23:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:57 Set A/D data flow result=40 16:23:57 Set A/D channel type result=40 16:23:57 Set A/D encoding result=40 16:23:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:57 Set channel filter=0.000000e+000 result=40 16:23:57 Config A/D Result=40 16:23:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:57 Get A/D filter: -9.255963e+061 result=40 16:23:57 Get A/D value=-858993460 result=40 16:23:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:23:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:23:57 Aux= 16:23:57 Message to Camera, serial 70481 queued 16:24:34 Received message from Master: op=PointingHead serial=70494 16:24:34 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:24:34 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:24:34 Point started: ret=0 16:24:34 point_skyscan result=0 16:24:35 Check angles 16:24:35 SkyScan query 16:24:35 SkyScan query done: ret=0 az=63.975<-4265 ze=66.555<-7563 Statuses=0009 0008 16:24:35 Msec=0 True Az=63.975 Ze=66.555 Az status=0009 Ze status=0008 16:24:36 Check angles 16:24:36 SkyScan query 16:24:36 SkyScan query done: ret=0 az=81.39<-5426 ze=66.495<-7567 Statuses=0009 0008 16:24:36 Msec=750 True Az=81.39 Ze=66.495 Az status=0009 Ze status=0008 16:24:36 Check angles 16:24:36 SkyScan query 16:24:37 SkyScan query done: ret=0 az=99.39<-6626 ze=66.495<-7567 Statuses=0009 0008 16:24:37 Msec=1500 True Az=99.39 Ze=66.495 Az status=0009 Ze status=0008 16:24:37 Check angles 16:24:37 SkyScan query 16:24:38 SkyScan query done: ret=0 az=117.405<-7827 ze=66.495<-7567 Statuses=0009 0008 16:24:38 Msec=2250 True Az=117.405 Ze=66.495 Az status=0009 Ze status=0008 16:24:38 Check angles 16:24:38 SkyScan query 16:24:38 SkyScan query done: ret=0 az=134.67<-8978 ze=66.495<-7567 Statuses=0009 0008 16:24:38 Msec=3000 True Az=134.67 Ze=66.495 Az status=0009 Ze status=0008 16:24:39 Check angles 16:24:39 SkyScan query 16:24:39 SkyScan query done: ret=0 az=152.505<-10167 ze=66.495<-7567 Statuses=0009 0008 16:24:39 Msec=3750 True Az=152.505 Ze=66.495 Az status=0009 Ze status=0008 16:24:39 Check angles 16:24:39 SkyScan query 16:24:40 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:24:40 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 16:24:40 Message to Master queued w/err=0: serial=70494 error=0 16:24:45 Received message from Master: op=Filter serial=70495 16:24:45 Color wheel filter change from 0 to 0 16:24:45 FLIGetFilterPos err=0 currentPosition=0 16:24:45 FLIGetStepsRemaining err=0 RemainingSteps=0 16:24:45 Filter is already there-color wheel unchanged 16:24:45 Received message from Master: op=Shutter serial=70496 16:24:45 Shutter LASER close 16:24:45 Received message from Camera: op=State serial=70498 16:24:45 GetSingleValue result=40 Value=cccccccc 16:24:45 SkyScan query 16:24:46 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:24:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:24:46 Parameters OK 16:24:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:24:46 Set A/D data flow result=40 16:24:46 Set A/D channel type result=40 16:24:46 Set A/D encoding result=40 16:24:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:24:46 Set channel filter=0.000000e+000 result=40 16:24:46 Config A/D Result=40 16:24:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:24:46 Get A/D filter: -9.255963e+061 result=40 16:24:46 Get A/D value=-858993460 result=40 16:24:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:24:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:24:46 Parameters OK 16:24:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:24:46 Set A/D data flow result=40 16:24:46 Set A/D channel type result=40 16:24:46 Set A/D encoding result=40 16:24:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:24:46 Set channel filter=0.000000e+000 result=40 16:24:46 Config A/D Result=40 16:24:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:24:46 Get A/D filter: -9.255963e+061 result=40 16:24:46 Get A/D value=-858993460 result=40 16:24:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:24:46 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:24:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:24:46 Aux= 16:24:46 Message to Camera, serial 70498 queued 16:25:23 Received message from Master: op=PointingHead serial=70511 16:25:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:25:23 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:25:23 Point started: ret=0 16:25:23 point_skyscan result=0 16:25:24 Check angles 16:25:24 SkyScan query 16:25:24 SkyScan query done: ret=0 az=135.165<-9011 ze=36.855<-9543 Statuses=0009 0009 16:25:24 Msec=0 True Az=135.165 Ze=36.855 Az status=0009 Ze status=0009 16:25:24 Check angles 16:25:24 SkyScan query 16:25:25 SkyScan query done: ret=0 az=117.675<-7845 ze=15.885<-10941 Statuses=0009 0009 16:25:25 Msec=750 True Az=117.675 Ze=15.885 Az status=0009 Ze status=0009 16:25:25 Check angles 16:25:25 SkyScan query 16:25:26 SkyScan query done: ret=0 az=100.32<-6688 ze=-5.07<-12338 Statuses=0009 0009 16:25:26 Msec=1500 True Az=100.32 Ze=-5.07 Az status=0009 Ze status=0009 16:25:26 Check angles 16:25:26 SkyScan query 16:25:26 SkyScan query done: ret=0 az=82.815<-5521 ze=-26.025<-13735 Statuses=0009 0009 16:25:26 Msec=2250 True Az=82.815 Ze=-26.025 Az status=0009 Ze status=0009 16:25:27 Check angles 16:25:27 SkyScan query 16:25:27 SkyScan query done: ret=0 az=65.31<-4354 ze=-38.565<-14571 Statuses=0009 0008 16:25:27 Msec=3000 True Az=65.31 Ze=-38.565 Az status=0009 Ze status=0008 16:25:27 Check angles 16:25:27 SkyScan query 16:25:28 SkyScan query done: ret=0 az=47.415<-3161 ze=-38.535<-14569 Statuses=0009 0008 16:25:28 Msec=3750 True Az=47.415 Ze=-38.535 Az status=0009 Ze status=0008 16:25:28 Check angles 16:25:28 SkyScan query 16:25:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:25:29 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:25:29 Message to Master queued w/err=0: serial=70511 error=0 16:25:34 Received message from Master: op=Filter serial=70512 16:25:34 Color wheel filter change from 0 to 0 16:25:34 FLIGetFilterPos err=0 currentPosition=0 16:25:34 FLIGetStepsRemaining err=0 RemainingSteps=0 16:25:34 Filter is already there-color wheel unchanged 16:25:34 Received message from Master: op=Shutter serial=70513 16:25:34 Shutter LASER close 16:25:34 Received message from Camera: op=State serial=70515 16:25:34 GetSingleValue result=40 Value=cccccccc 16:25:34 SkyScan query 16:25:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:25:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:25:35 Parameters OK 16:25:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:25:35 Set A/D data flow result=40 16:25:35 Set A/D channel type result=40 16:25:35 Set A/D encoding result=40 16:25:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:25:35 Set channel filter=0.000000e+000 result=40 16:25:35 Config A/D Result=40 16:25:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:25:35 Get A/D filter: -9.255963e+061 result=40 16:25:35 Get A/D value=-858993460 result=40 16:25:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:25:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:25:35 Parameters OK 16:25:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:25:35 Set A/D data flow result=40 16:25:35 Set A/D channel type result=40 16:25:35 Set A/D encoding result=40 16:25:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:25:35 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-11 16:25:35] 16:25:35 Config A/D Result=40 16:25:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:25:35 Get A/D filter: -9.255963e+061 result=40 16:25:35 Get A/D value=-858993460 result=40 16:25:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:25:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:25:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:25:35 Aux= 16:25:35 Message to Camera, serial 70515 queued 16:26:11 Received message from Master: op=PointingHead serial=70528 16:26:11 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:26:11 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:26:12 Point started: ret=0 16:26:12 point_skyscan result=0 16:26:12 Check angles 16:26:12 SkyScan query 16:26:13 SkyScan query done: ret=0 az=64.05<-4270 ze=-68.22<-16548 Statuses=0009 0009 16:26:13 Msec=0 True Az=64.05 Ze=-68.22 Az status=0009 Ze status=0009 16:26:13 Check angles 16:26:13 SkyScan query 16:26:14 SkyScan query done: ret=0 az=81.285<-5419 ze=-89.205<-17947 Statuses=0009 0009 16:26:14 Msec=750 True Az=81.285 Ze=-89.205 Az status=0009 Ze status=0009 16:26:14 Check angles 16:26:14 SkyScan query 16:26:15 SkyScan query done: ret=0 az=98.88<-6592 ze=-110.145<-19343 Statuses=0009 0009 16:26:15 Msec=1500 True Az=98.88 Ze=-110.145 Az status=0009 Ze status=0009 16:26:15 Check angles 16:26:15 SkyScan query 16:26:15 SkyScan query done: ret=0 az=116.49<-7766 ze=-131.085<-20739 Statuses=0009 0009 16:26:15 Msec=2250 True Az=116.49 Ze=-131.085 Az status=0009 Ze status=0009 16:26:15 Check angles 16:26:15 SkyScan query 16:26:16 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 16:26:16 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 16:26:16 Check angles 16:26:16 SkyScan query 16:26:17 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:26:17 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:26:17 Message to Master queued w/err=0: serial=70528 error=0 16:26:22 Received message from Master: op=Filter serial=70529 16:26:22 Color wheel filter change from 0 to 0 16:26:22 FLIGetFilterPos err=0 currentPosition=0 16:26:22 FLIGetStepsRemaining err=0 RemainingSteps=0 16:26:22 Filter is already there-color wheel unchanged 16:26:22 Received message from Master: op=Shutter serial=70530 16:26:22 Shutter LASER close 16:26:22 Received message from Camera: op=State serial=70532 16:26:22 GetSingleValue result=40 Value=cccccccc 16:26:22 SkyScan query 16:26:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:26:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:26:23 Parameters OK 16:26:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:26:23 Set A/D data flow result=40 16:26:23 Set A/D channel type result=40 16:26:23 Set A/D encoding result=40 16:26:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:26:23 Set channel filter=0.000000e+000 result=40 16:26:23 Config A/D Result=40 16:26:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:26:23 Get A/D filter: -9.255963e+061 result=40 16:26:23 Get A/D value=-858993460 result=40 16:26:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:26:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:26:23 Parameters OK 16:26:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:26:23 Set A/D data flow result=40 16:26:23 Set A/D channel type result=40 16:26:23 Set A/D encoding result=40 16:26:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:26:23 Set channel filter=0.000000e+000 result=40 16:26:23 Config A/D Result=40 16:26:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:26:23 Get A/D filter: -9.255963e+061 result=40 16:26:23 Get A/D value=-858993460 result=40 16:26:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:26:23 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:26:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:26:23 Aux= 16:26:23 Message to Camera, serial 70532 queued 16:26:58 Received message from Master: op=PointingHead serial=70544 16:26:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:26:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:26:59 Point started: ret=0 16:26:59 point_skyscan result=0 16:27:00 Check angles 16:27:00 SkyScan query 16:27:00 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 16:27:00 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 16:27:00 Check angles 16:27:00 SkyScan query 16:27:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:27:01 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:27:01 Message to Master queued w/err=0: serial=70544 error=0 16:27:06 Received message from Master: op=Filter serial=70545 16:27:06 Color wheel filter change from 0 to 0 16:27:06 FLIGetFilterPos err=0 currentPosition=0 16:27:06 FLIGetStepsRemaining err=0 RemainingSteps=0 16:27:06 Filter is already there-color wheel unchanged 16:27:06 Received message from Master: op=Shutter serial=70546 16:27:06 Shutter LASER open 16:27:06 Received message from Camera: op=State serial=70548 16:27:06 GetSingleValue result=40 Value=cccccccc 16:27:06 SkyScan query 16:27:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:27:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:27:07 Parameters OK 16:27:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:27:07 Set A/D data flow result=40 16:27:07 Set A/D channel type result=40 16:27:07 Set A/D encoding result=40 16:27:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:27:07 Set channel filter=0.000000e+000 result=40 16:27:07 Config A/D Result=40 16:27:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:27:07 Get A/D filter: -9.255963e+061 result=40 16:27:07 Get A/D value=-858993460 result=40 16:27:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:27:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:27:07 Parameters OK 16:27:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:27:07 Set A/D data flow result=40 16:27:07 Set A/D channel type result=40 16:27:07 Set A/D encoding result=40 16:27:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:27:07 Set channel filter=0.000000e+000 result=40 16:27:07 Config A/D Result=40 16:27:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:27:07 Get A/D filter: -9.255963e+061 result=40 16:27:07 Get A/D value=-858993460 result=40 16:27:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:27:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:27:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:27:07 Aux= 16:27:07 Message to Camera, serial 70548 queued 16:27:15 Received message from Master: op=Shutter serial=70558 16:27:15 Shutter LASER close 16:27:16 Received message from Master: op=PointingHead serial=70562 16:27:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:27:16 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:27:16 Point started: ret=0 16:27:16 point_skyscan result=0 16:27:17 Check angles 16:27:17 SkyScan query 16:27:18 SkyScan query done: ret=0 az=135.81<-9054 ze=-143.37<-21558 Statuses=0009 0009 16:27:18 Msec=0 True Az=135.81 Ze=-143.37 Az status=0009 Ze status=0009 16:27:18 Check angles 16:27:18 SkyScan query 16:27:18 SkyScan query done: ret=0 az=153.345<-10223 ze=-122.43<-20162 Statuses=0009 0009 16:27:18 Msec=750 True Az=153.345 Ze=-122.43 Az status=0009 Ze status=0009 16:27:18 Check angles 16:27:18 SkyScan query 16:27:19 SkyScan query done: ret=0 az=170.76<-11384 ze=-101.52<-18768 Statuses=0009 0009 16:27:19 Msec=1500 True Az=170.76 Ze=-101.52 Az status=0009 Ze status=0009 16:27:19 Check angles 16:27:19 SkyScan query 16:27:20 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.49<-17366 Statuses=0008 0009 16:27:20 Msec=2250 True Az=176.025 Ze=-80.49 Az status=0008 Ze status=0009 16:27:20 Check angles 16:27:20 SkyScan query 16:27:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.565<-15971 Statuses=0008 0009 16:27:21 Msec=3000 True Az=175.995 Ze=-59.565 Az status=0008 Ze status=0009 16:27:21 Check angles 16:27:21 SkyScan query 16:27:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:27:21 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:27:21 Message to Master queued w/err=0: serial=70562 error=0 16:27:26 Received message from Master: op=Filter serial=70563 16:27:26 Color wheel filter change from 0 to 0 16:27:26 FLIGetFilterPos err=0 currentPosition=0 16:27:26 FLIGetStepsRemaining err=0 RemainingSteps=0 16:27:26 Filter is already there-color wheel unchanged 16:27:26 Received message from Master: op=Shutter serial=70564 16:27:26 Shutter LASER close 16:27:27 Received message from Camera: op=State serial=70566 16:27:27 GetSingleValue result=40 Value=cccccccc 16:27:27 SkyScan query 16:27:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:27:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:27:27 Parameters OK 16:27:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:27:27 Set A/D data flow result=40 16:27:27 Set A/D channel type result=40 16:27:27 Set A/D encoding result=40 16:27:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:27:27 Set channel filter=0.000000e+000 result=40 16:27:27 Config A/D Result=40 16:27:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:27:27 Get A/D filter: -9.255963e+061 result=40 16:27:27 Get A/D value=-858993460 result=40 16:27:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:27:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:27:27 Parameters OK 16:27:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:27:27 Set A/D data flow result=40 16:27:27 Set A/D channel type result=40 16:27:27 Set A/D encoding result=40 16:27:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:27:27 Set channel filter=0.000000e+000 result=40 16:27:27 Config A/D Result=40 16:27:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:27:27 Get A/D filter: -9.255963e+061 result=40 16:27:27 Get A/D value=-858993460 result=40 16:27:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:27:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:27:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:27:27 Aux= 16:27:27 Message to Camera, serial 70566 queued 16:28:04 Received message from Master: op=PointingHead serial=70579 16:28:04 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:28:04 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:28:04 Point started: ret=0 16:28:04 point_skyscan result=0 16:28:05 Check angles 16:28:05 SkyScan query 16:28:06 SkyScan query done: ret=0 az=152.805<-10187 ze=-21.615<-13441 Statuses=0009 0009 16:28:06 Msec=0 True Az=152.805 Ze=-21.615 Az status=0009 Ze status=0009 16:28:06 Check angles 16:28:06 SkyScan query 16:28:06 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.63<-12042 Statuses=0009 0009 16:28:06 Msec=750 True Az=135.45 Ze=-0.63 Az status=0009 Ze status=0009 16:28:07 Check angles 16:28:07 SkyScan query 16:28:07 SkyScan query done: ret=0 az=117.765<-7851 ze=20.295<-10647 Statuses=0009 0009 16:28:07 Msec=1500 True Az=117.765 Ze=20.295 Az status=0009 Ze status=0009 16:28:07 Check angles 16:28:07 SkyScan query 16:28:08 SkyScan query done: ret=0 az=100.125<-6675 ze=41.715<-9219 Statuses=0009 0009 16:28:08 Msec=2250 True Az=100.125 Ze=41.715 Az status=0009 Ze status=0009 16:28:08 Check angles 16:28:08 SkyScan query 16:28:09 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 16:28:09 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 16:28:09 Check angles 16:28:09 SkyScan query 16:28:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:28:10 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:28:10 Message to Master queued w/err=0: serial=70579 error=0 16:28:15 Received message from Master: op=Filter serial=70580 16:28:15 Color wheel filter change from 0 to 0 16:28:15 FLIGetFilterPos err=0 currentPosition=0 16:28:15 FLIGetStepsRemaining err=0 RemainingSteps=0 16:28:15 Filter is already there-color wheel unchanged 16:28:15 Received message from Master: op=Shutter serial=70581 16:28:15 Shutter LASER close 16:28:15 Received message from Camera: op=State serial=70583 16:28:15 GetSingleValue result=40 Value=cccccccc 16:28:15 SkyScan query 16:28:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:28:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:28:15 Parameters OK 16:28:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:28:15 Set A/D data flow result=40 16:28:15 Set A/D channel type result=40 16:28:15 Set A/D encoding result=40 16:28:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:28:15 Set channel filter=0.000000e+000 result=40 16:28:15 Config A/D Result=40 16:28:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:28:15 Get A/D filter: -9.255963e+061 result=40 16:28:15 Get A/D value=-858993460 result=40 16:28:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:28:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:28:15 Parameters OK 16:28:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:28:15 Set A/D data flow result=40 16:28:15 Set A/D channel type result=40 16:28:15 Set A/D encoding result=40 16:28:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:28:15 Set channel filter=0.000000e+000 result=40 16:28:15 Config A/D Result=40 16:28:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:28:15 Get A/D filter: -9.255963e+061 result=40 16:28:15 Get A/D value=-858993460 result=40 16:28:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:28:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:28:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:28:15 Aux= 16:28:15 Message to Camera, serial 70583 queued 16:28:52 Received message from Master: op=PointingHead serial=70596 16:28:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:28:52 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:28:52 Point started: ret=0 16:28:52 point_skyscan result=0 16:28:53 Check angles 16:28:53 SkyScan query 16:28:54 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 16:28:54 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 16:28:54 Check angles 16:28:54 SkyScan query 16:28:55 SkyScan query done: ret=0 az=127.08<-8472 ze=38.505<-9433 Statuses=0009 0008 16:28:55 Msec=750 True Az=127.08 Ze=38.505 Az status=0009 Ze status=0008 16:28:55 Check angles 16:28:55 SkyScan query 16:28:55 SkyScan query done: ret=0 az=144.57<-9638 ze=38.505<-9433 Statuses=0009 0008 16:28:55 Msec=1500 True Az=144.57 Ze=38.505 Az status=0009 Ze status=0008 16:28:56 Check angles 16:28:56 SkyScan query 16:28:56 SkyScan query done: ret=0 az=162.015<-10801 ze=38.505<-9433 Statuses=0009 0008 16:28:56 Msec=2250 True Az=162.015 Ze=38.505 Az status=0009 Ze status=0008 16:28:56 Check angles 16:28:56 SkyScan query 16:28:57 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:28:57 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:28:57 Check angles 16:28:57 SkyScan query 16:28:58 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:28:58 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:28:58 Message to Master queued w/err=0: serial=70596 error=0 16:29:03 Received message from Master: op=Filter serial=70597 16:29:03 Color wheel filter change from 0 to 0 16:29:03 FLIGetFilterPos err=0 currentPosition=0 16:29:03 FLIGetStepsRemaining err=0 RemainingSteps=0 16:29:03 Filter is already there-color wheel unchanged 16:29:03 Received message from Master: op=Shutter serial=70598 16:29:03 Shutter LASER close 16:29:03 Received message from Camera: op=State serial=70600 16:29:03 GetSingleValue result=40 Value=cccccccc 16:29:03 SkyScan query 16:29:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:29:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:29:03 Parameters OK 16:29:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:29:03 Set A/D data flow result=40 16:29:03 Set A/D channel type result=40 16:29:03 Set A/D encoding result=40 16:29:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:29:03 Set channel filter=0.000000e+000 result=40 16:29:03 Config A/D Result=40 16:29:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:29:03 Get A/D filter: -9.255963e+061 result=40 16:29:03 Get A/D value=-858993460 result=40 16:29:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:29:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:29:03 Parameters OK 16:29:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:29:03 Set A/D data flow result=40 16:29:03 Set A/D channel type result=40 16:29:03 Set A/D encoding result=40 16:29:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:29:03 Set channel filter=0.000000e+000 result=40 16:29:03 Config A/D Result=40 16:29:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:29:03 Get A/D filter: -9.255963e+061 result=40 16:29:03 Get A/D value=-858993460 result=40 16:29:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:29:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:29:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:29:03 Aux= 16:29:03 Message to Camera, serial 70600 queued 16:29:40 Received message from Master: op=PointingHead serial=70613 16:29:40 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:29:40 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:29:41 Point started: ret=0 16:29:41 point_skyscan result=0 16:29:41 Check angles 16:29:41 SkyScan query 16:29:42 SkyScan query done: ret=0 az=152.97<-10198 ze=8.805<-11413 Statuses=0009 0009 16:29:42 Msec=0 True Az=152.97 Ze=8.805 Az status=0009 Ze status=0009 16:29:42 Check angles 16:29:42 SkyScan query 16:29:43 SkyScan query done: ret=0 az=135.48<-9032 ze=-12.225<-12815 Statuses=0009 0009 16:29:43 Msec=750 True Az=135.48 Ze=-12.225 Az status=0009 Ze status=0009 16:29:43 Check angles 16:29:43 SkyScan query 16:29:43 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.075<-14205 Statuses=0009 0009 16:29:43 Msec=1500 True Az=118.02 Ze=-33.075 Az status=0009 Ze status=0009 16:29:44 Check angles 16:29:44 SkyScan query 16:29:44 SkyScan query done: ret=0 az=100.545<-6703 ze=-51.51<-15434 Statuses=0009 0009 16:29:44 Msec=2250 True Az=100.545 Ze=-51.51 Az status=0009 Ze status=0009 16:29:44 Check angles 16:29:44 SkyScan query 16:29:45 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 16:29:45 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 16:29:45 Check angles 16:29:45 SkyScan query 16:29:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:29:46 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:29:46 Message to Master queued w/err=0: serial=70613 error=0 16:29:51 Received message from Master: op=Filter serial=70614 16:29:51 Color wheel filter change from 0 to 0 16:29:51 FLIGetFilterPos err=0 currentPosition=0 16:29:51 FLIGetStepsRemaining err=0 RemainingSteps=0 16:29:51 Filter is already there-color wheel unchanged 16:29:51 Received message from Master: op=Shutter serial=70615 16:29:51 Shutter LASER close 16:29:51 Received message from Camera: op=State serial=70617 16:29:51 GetSingleValue result=40 Value=cccccccc 16:29:51 SkyScan query 16:29:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:29:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:29:51 Parameters OK 16:29:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:29:51 Set A/D data flow result=40 16:29:51 Set A/D channel type result=40 16:29:51 Set A/D encoding result=40 16:29:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:29:51 Set channel filter=0.000000e+000 result=40 16:29:51 Config A/D Result=40 16:29:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:29:51 Get A/D filter: -9.255963e+061 result=40 16:29:51 Get A/D value=-858993460 result=40 16:29:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:29:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:29:51 Parameters OK 16:29:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:29:51 Set A/D data flow result=40 16:29:51 Set A/D channel type result=40 16:29:51 Set A/D encoding result=40 16:29:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:29:51 Set channel filter=0.000000e+000 result=40 16:29:51 Config A/D Result=40 16:29:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:29:51 Get A/D filter: -9.255963e+061 result=40 16:29:51 Get A/D value=-858993460 result=40 16:29:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:29:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:29:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:29:51 Aux= 16:29:51 Message to Camera, serial 70617 queued 16:30:28 Received message from Master: op=PointingHead serial=70630 16:30:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:30:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:30:29 Point started: ret=0 16:30:29 point_skyscan result=0 16:30:29 Check angles 16:30:29 SkyScan query 16:30:30 SkyScan query done: ret=0 az=109.485<-7299 ze=-81.855<-17457 Statuses=0009 0009 16:30:30 Msec=0 True Az=109.485 Ze=-81.855 Az status=0009 Ze status=0009 16:30:30 Check angles 16:30:30 SkyScan query 16:30:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.81<-18854 Statuses=0008 0009 16:30:31 Msec=750 True Az=112.995 Ze=-102.81 Az status=0008 Ze status=0009 16:30:31 Check angles 16:30:31 SkyScan query 16:30:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.17<-20278 Statuses=0008 0009 16:30:31 Msec=1500 True Az=112.995 Ze=-124.17 Az status=0008 Ze status=0009 16:30:32 Check angles 16:30:32 SkyScan query 16:30:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.11<-21674 Statuses=0008 0009 16:30:32 Msec=2250 True Az=112.995 Ze=-145.11 Az status=0008 Ze status=0009 16:30:32 Check angles 16:30:32 SkyScan query 16:30:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.035<-23069 Statuses=0008 0009 16:30:33 Msec=3000 True Az=112.995 Ze=-166.035 Az status=0008 Ze status=0009 16:30:33 Check angles 16:30:33 SkyScan query 16:30:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:30:34 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:30:34 Message to Master queued w/err=0: serial=70630 error=0 16:30:39 Received message from Master: op=Filter serial=70631 16:30:39 Color wheel filter change from 0 to 0 16:30:39 FLIGetFilterPos err=0 currentPosition=0 16:30:39 FLIGetStepsRemaining err=0 RemainingSteps=0 16:30:39 Filter is already there-color wheel unchanged 16:30:39 Received message from Master: op=Shutter serial=70632 16:30:39 Shutter LASER open 16:30:39 Received message from Camera: op=State serial=70634 16:30:39 GetSingleValue result=40 Value=cccccccc 16:30:39 SkyScan query 16:30:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:30:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:30:40 Parameters OK 16:30:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:30:40 Set A/D data flow result=40 16:30:40 Set A/D channel type result=40 16:30:40 Set A/D encoding result=40 16:30:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:30:40 Set channel filter=0.000000e+000 result=40 16:30:40 Config A/D Result=40 16:30:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:30:40 Get A/D filter: -9.255963e+061 result=40 16:30:40 Get A/D value=-858993460 result=40 16:30:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:30:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:30:40 Parameters OK 16:30:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:30:40 Set A/D data flow result=40 16:30:40 Set A/D channel type result=40 16:30:40 Set A/D encoding result=40 16:30:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:30:40 Set channel filter=0.000000e+000 result=40 16:30:40 Config A/D Result=40 16:30:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:30:40 Get A/D filter: -9.255963e+061 result=40 16:30:40 Get A/D value=-858993460 result=40 16:30:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:30:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:30:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:30:40 Aux= 16:30:40 Message to Camera, serial 70634 queued 16:30:48 Received message from Master: op=Shutter serial=70644 16:30:48 Shutter LASER close 16:30:49 Received message from Master: op=PointingHead serial=70648 16:30:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:30:49 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:30:49 Point started: ret=0 16:30:49 point_skyscan result=0 16:30:50 Check angles 16:30:50 SkyScan query 16:30:50 SkyScan query done: ret=0 az=90.18<-6012 ze=157.53<-1498 Statuses=0009 0009 16:30:50 Msec=0 True Az=90.18 Ze=157.53 Az status=0009 Ze status=0009 16:30:50 Check angles 16:30:50 SkyScan query 16:30:51 SkyScan query done: ret=0 az=72.705<-4847 ze=136.56<-2896 Statuses=0009 0009 16:30:51 Msec=750 True Az=72.705 Ze=136.56 Az status=0009 Ze status=0009 16:30:51 Check angles 16:30:51 SkyScan query 16:30:52 SkyScan query done: ret=0 az=55.215<-3681 ze=115.62<-4292 Statuses=0009 0009 16:30:52 Msec=1500 True Az=55.215 Ze=115.62 Az status=0009 Ze status=0009 16:30:52 Check angles 16:30:52 SkyScan query 16:30:53 SkyScan query done: ret=0 az=40.86<-2724 ze=94.665<-5689 Statuses=0009 0009 16:30:53 Msec=2250 True Az=40.86 Ze=94.665 Az status=0009 Ze status=0009 16:30:53 Check angles 16:30:53 SkyScan query 16:30:53 SkyScan query done: ret=0 az=40.995<-2733 ze=73.725<-7085 Statuses=0008 0009 16:30:53 Msec=3000 True Az=40.995 Ze=73.725 Az status=0008 Ze status=0009 16:30:53 Check angles 16:30:53 SkyScan query 16:30:54 SkyScan query done: ret=0 az=40.995<-2733 ze=53.025<-8465 Statuses=0008 0009 16:30:54 Msec=3750 True Az=40.995 Ze=53.025 Az status=0008 Ze status=0009 16:30:54 Check angles 16:30:54 SkyScan query 16:30:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:30:55 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:30:55 Message to Master queued w/err=0: serial=70648 error=0 16:31:00 Received message from Master: op=Filter serial=70649 16:31:00 Color wheel filter change from 0 to 0 16:31:00 FLIGetFilterPos err=0 currentPosition=0 16:31:00 FLIGetStepsRemaining err=0 RemainingSteps=0 16:31:00 Filter is already there-color wheel unchanged 16:31:00 Received message from Master: op=Shutter serial=70650 16:31:00 Shutter LASER close 16:31:00 Received message from Camera: op=State serial=70652 16:31:00 GetSingleValue result=40 Value=cccccccc 16:31:00 SkyScan query 16:31:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:31:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:01 Parameters OK 16:31:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:01 Set A/D data flow result=40 16:31:01 Set A/D channel type result=40 16:31:01 Set A/D encoding result=40 16:31:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:01 Set channel filter=0.000000e+000 result=40 16:31:01 Config A/D Result=40 16:31:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:01 Get A/D filter: -9.255963e+061 result=40 16:31:01 Get A/D value=-858993460 result=40 16:31:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:01 Parameters OK 16:31:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:01 Set A/D data flow result=40 16:31:01 Set A/D channel type result=40 16:31:01 Set A/D encoding result=40 16:31:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:01 Set channel filter=0.000000e+000 result=40 16:31:01 Config A/D Result=40 16:31:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:01 Get A/D filter: -9.255963e+061 result=40 16:31:01 Get A/D value=-858993460 result=40 16:31:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:31:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:31:01 Aux= 16:31:01 Message to Camera, serial 70652 queued 16:31:38 Received message from Master: op=PointingHead serial=70665 16:31:38 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:31:38 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:31:38 Point started: ret=0 16:31:38 point_skyscan result=0 16:31:39 Check angles 16:31:39 SkyScan query 16:31:39 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 16:31:39 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 16:31:39 Check angles 16:31:39 SkyScan query 16:31:40 SkyScan query done: ret=0 az=81.765<-5451 ze=66.495<-7567 Statuses=0009 0008 16:31:40 Msec=750 True Az=81.765 Ze=66.495 Az status=0009 Ze status=0008 16:31:40 Check angles 16:31:40 SkyScan query 16:31:41 SkyScan query done: ret=0 az=99.81<-6654 ze=66.495<-7567 Statuses=0009 0008 16:31:41 Msec=1500 True Az=99.81 Ze=66.495 Az status=0009 Ze status=0008 16:31:41 Check angles 16:31:41 SkyScan query 16:31:42 SkyScan query done: ret=0 az=117.33<-7822 ze=66.495<-7567 Statuses=0009 0008 16:31:42 Msec=2250 True Az=117.33 Ze=66.495 Az status=0009 Ze status=0008 16:31:42 Check angles 16:31:42 SkyScan query 16:31:42 SkyScan query done: ret=0 az=134.73<-8982 ze=66.495<-7567 Statuses=0009 0008 16:31:42 Msec=3000 True Az=134.73 Ze=66.495 Az status=0009 Ze status=0008 16:31:42 Check angles 16:31:42 SkyScan query 16:31:43 SkyScan query done: ret=0 az=152.16<-10144 ze=66.495<-7567 Statuses=0009 0008 16:31:43 Msec=3750 True Az=152.16 Ze=66.495 Az status=0009 Ze status=0008 16:31:43 Check angles 16:31:43 SkyScan query 16:31:44 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:31:44 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 16:31:44 Message to Master queued w/err=0: serial=70665 error=0 16:31:49 Received message from Master: op=Filter serial=70666 16:31:49 Color wheel filter change from 0 to 0 16:31:49 FLIGetFilterPos err=0 currentPosition=0 16:31:49 FLIGetStepsRemaining err=0 RemainingSteps=0 16:31:49 Filter is already there-color wheel unchanged 16:31:49 Received message from Master: op=Shutter serial=70667 16:31:49 Shutter LASER close 16:31:49 Received message from Camera: op=State serial=70669 16:31:49 GetSingleValue result=40 Value=cccccccc 16:31:49 SkyScan query 16:31:50 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:31:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:50 Parameters OK 16:31:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:50 Set A/D data flow result=40 16:31:50 Set A/D channel type result=40 16:31:50 Set A/D encoding result=40 16:31:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:50 Set channel filter=0.000000e+000 result=40 16:31:50 Config A/D Result=40 16:31:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:50 Get A/D filter: -9.255963e+061 result=40 16:31:50 Get A/D value=-858993460 result=40 16:31:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:50 Parameters OK 16:31:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:50 Set A/D data flow result=40 16:31:50 Set A/D channel type result=40 16:31:50 Set A/D encoding result=40 16:31:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:50 Set channel filter=0.000000e+000 result=40 16:31:50 Config A/D Result=40 16:31:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:50 Get A/D filter: -9.255963e+061 result=40 16:31:50 Get A/D value=-858993460 result=40 16:31:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:50 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:31:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:31:50 Aux= 16:31:50 Message to Camera, serial 70669 queued 16:32:26 Received message from Master: op=PointingHead serial=70682 16:32:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:32:26 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:32:27 Point started: ret=0 16:32:27 point_skyscan result=0 16:32:27 Check angles 16:32:27 SkyScan query 16:32:28 SkyScan query done: ret=0 az=135.09<-9006 ze=36.84<-9544 Statuses=0009 0009 16:32:28 Msec=0 True Az=135.09 Ze=36.84 Az status=0009 Ze status=0009 16:32:28 Check angles 16:32:28 SkyScan query 16:32:29 SkyScan query done: ret=0 az=117.285<-7819 ze=15.51<-10966 Statuses=0009 0009 16:32:29 Msec=750 True Az=117.285 Ze=15.51 Az status=0009 Ze status=0009 16:32:29 Check angles 16:32:29 SkyScan query 16:32:30 SkyScan query done: ret=0 az=99.495<-6633 ze=-5.91<-12394 Statuses=0009 0009 16:32:30 Msec=1500 True Az=99.495 Ze=-5.91 Az status=0009 Ze status=0009 16:32:30 Check angles 16:32:30 SkyScan query 16:32:30 SkyScan query done: ret=0 az=82.02<-5468 ze=-26.865<-13791 Statuses=0009 0009 16:32:30 Msec=2250 True Az=82.02 Ze=-26.865 Az status=0009 Ze status=0009 16:32:31 Check angles 16:32:31 SkyScan query 16:32:31 SkyScan query done: ret=0 az=64.17<-4278 ze=-38.565<-14571 Statuses=0009 0008 16:32:31 Msec=3000 True Az=64.17 Ze=-38.565 Az status=0009 Ze status=0008 16:32:31 Check angles 16:32:31 SkyScan query 16:32:32 SkyScan query done: ret=0 az=46.395<-3093 ze=-38.52<-14568 Statuses=0009 0008 16:32:32 Msec=3750 True Az=46.395 Ze=-38.52 Az status=0009 Ze status=0008 16:32:32 Check angles 16:32:32 SkyScan query 16:32:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:32:33 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:32:33 Message to Master queued w/err=0: serial=70682 error=0 16:32:38 Received message from Master: op=Filter serial=70683 16:32:38 Color wheel filter change from 0 to 0 16:32:38 FLIGetFilterPos err=0 currentPosition=0 16:32:38 FLIGetStepsRemaining err=0 RemainingSteps=0 16:32:38 Filter is already there-color wheel unchanged 16:32:38 Received message from Master: op=Shutter serial=70684 16:32:38 Shutter LASER close 16:32:38 Received message from Camera: op=State serial=70686 16:32:38 GetSingleValue result=40 Value=cccccccc 16:32:38 SkyScan query 16:32:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:32:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:32:38 Parameters OK 16:32:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:32:38 Set A/D data flow result=40 16:32:38 Set A/D channel type result=40 16:32:38 Set A/D encoding result=40 16:32:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:32:38 Set channel filter=0.000000e+000 result=40 16:32:38 Config A/D Result=40 16:32:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:32:38 Get A/D filter: -9.255963e+061 result=40 16:32:38 Get A/D value=-858993460 result=40 16:32:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:32:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:32:38 Parameters OK 16:32:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:32:38 Set A/D data flow result=40 16:32:38 Set A/D channel type result=40 16:32:38 Set A/D encoding result=40 16:32:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:32:38 Set channel filter=0.000000e+000 result=40 16:32:38 Config A/D Result=40 16:32:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:32:38 Get A/D filter: -9.255963e+061 result=40 16:32:38 Get A/D value=-858993460 result=40 16:32:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:32:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:32:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:32:38 Aux= 16:32:38 Message to Camera, serial 70686 queued 16:33:15 Received message from Master: op=PointingHead serial=70699 16:33:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:33:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:33:16 Point started: ret=0 16:33:16 point_skyscan result=0 16:33:16 Check angles 16:33:16 SkyScan query 16:33:17 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.55<-16570 Statuses=0009 0009 16:33:17 Msec=0 True Az=64.215 Ze=-68.55 Az status=0009 Ze status=0009 16:33:17 Check angles 16:33:17 SkyScan query 16:33:18 SkyScan query done: ret=0 az=82.035<-5469 ze=-89.97<-17998 Statuses=0009 0009 16:33:18 Msec=750 True Az=82.035 Ze=-89.97 Az status=0009 Ze status=0009 16:33:18 Check angles 16:33:18 SkyScan query 16:33:18 SkyScan query done: ret=0 az=99.66<-6644 ze=-110.925<-19395 Statuses=0009 0009 16:33:18 Msec=1500 True Az=99.66 Ze=-110.925 Az status=0009 Ze status=0009 16:33:19 Check angles 16:33:19 SkyScan query 16:33:19 SkyScan query done: ret=0 az=117.405<-7827 ze=-132.27<-20818 Statuses=0009 0009 16:33:19 Msec=2250 True Az=117.405 Ze=-132.27 Az status=0009 Ze status=0009 16:33:19 Check angles 16:33:19 SkyScan query 16:33:20 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 16:33:20 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 16:33:20 Check angles 16:33:20 SkyScan query 16:33:21 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:33:21 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:33:21 Message to Master queued w/err=0: serial=70699 error=0 16:33:26 Received message from Master: op=Filter serial=70700 16:33:26 Color wheel filter change from 0 to 0 16:33:26 FLIGetFilterPos err=0 currentPosition=0 16:33:26 FLIGetStepsRemaining err=0 RemainingSteps=0 16:33:26 Filter is already there-color wheel unchanged 16:33:26 Received message from Master: op=Shutter serial=70701 16:33:26 Shutter LASER close 16:33:26 Received message from Camera: op=State serial=70703 16:33:26 GetSingleValue result=40 Value=cccccccc 16:33:26 SkyScan query 16:33:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:33:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:33:27 Parameters OK 16:33:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:33:27 Set A/D data flow result=40 16:33:27 Set A/D channel type result=40 16:33:27 Set A/D encoding result=40 16:33:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:33:27 Set channel filter=0.000000e+000 result=40 16:33:27 Config A/D Result=40 16:33:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:33:27 Get A/D filter: -9.255963e+061 result=40 16:33:27 Get A/D value=-858993460 result=40 16:33:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:33:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:33:27 Parameters OK 16:33:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:33:27 Set A/D data flow result=40 16:33:27 Set A/D channel type result=40 16:33:27 Set A/D encoding result=40 16:33:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:33:27 Set channel filter=0.000000e+000 result=40 16:33:27 Config A/D Result=40 16:33:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:33:27 Get A/D filter: -9.255963e+061 result=40 16:33:27 Get A/D value=-858993460 result=40 16:33:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:33:27 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:33:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:33:27 Aux= 16:33:27 Message to Camera, serial 70703 queued 16:34:03 Received message from Master: op=PointingHead serial=70716 16:34:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:34:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:34:04 Point started: ret=0 16:34:04 point_skyscan result=0 16:34:05 Check angles 16:34:05 SkyScan query 16:34:05 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.435<-23429 Statuses=0009 0009 16:34:05 Msec=0 True Az=113.01 Ze=-171.435 Az status=0009 Ze status=0009 16:34:05 Check angles 16:34:05 SkyScan query 16:34:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:34:06 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:34:06 Message to Master queued w/err=0: serial=70716 error=0 16:34:11 Received message from Master: op=Filter serial=70717 16:34:11 Color wheel filter change from 0 to 0 16:34:11 FLIGetFilterPos err=0 currentPosition=0 16:34:11 FLIGetStepsRemaining err=0 RemainingSteps=0 16:34:11 Filter is already there-color wheel unchanged 16:34:11 Received message from Master: op=Shutter serial=70718 16:34:11 Shutter LASER open 16:34:11 Received message from Camera: op=State serial=70720 16:34:11 GetSingleValue result=40 Value=cccccccc 16:34:11 SkyScan query 16:34:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:34:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:34:12 Parameters OK 16:34:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:34:12 Set A/D data flow result=40 16:34:12 Set A/D channel type result=40 16:34:12 Set A/D encoding result=40 16:34:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:34:12 Set channel filter=0.000000e+000 result=40 16:34:12 Config A/D Result=40 16:34:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:34:12 Get A/D filter: -9.255963e+061 result=40 16:34:12 Get A/D value=-858993460 result=40 16:34:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:34:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:34:12 Parameters OK 16:34:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:34:12 Set A/D data flow result=40 16:34:12 Set A/D channel type result=40 16:34:12 Set A/D encoding result=40 16:34:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:34:12 Set channel filter=0.000000e+000 result=40 16:34:12 Config A/D Result=40 16:34:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:34:12 Get A/D filter: -9.255963e+061 result=40 16:34:12 Get A/D value=-858993460 result=40 16:34:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:34:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:34:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:34:12 Aux= 16:34:12 Message to Camera, serial 70720 queued 16:34:20 Received message from Master: op=Shutter serial=70730 16:34:20 Shutter LASER close 16:34:21 Received message from Master: op=PointingHead serial=70734 16:34:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:34:21 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:34:21 Point started: ret=0 16:34:21 point_skyscan result=0 16:34:22 Check angles 16:34:22 SkyScan query 16:34:22 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.445<-21563 Statuses=0009 0009 16:34:22 Msec=0 True Az=135.72 Ze=-143.445 Az status=0009 Ze status=0009 16:34:23 Check angles 16:34:23 SkyScan query 16:34:23 SkyScan query done: ret=0 az=153.21<-10214 ze=-122.49<-20166 Statuses=0009 0009 16:34:23 Msec=750 True Az=153.21 Ze=-122.49 Az status=0009 Ze status=0009 16:34:23 Check angles 16:34:23 SkyScan query 16:34:24 SkyScan query done: ret=0 az=171.045<-11403 ze=-101.13<-18742 Statuses=0009 0009 16:34:24 Msec=1500 True Az=171.045 Ze=-101.13 Az status=0009 Ze status=0009 16:34:24 Check angles 16:34:24 SkyScan query 16:34:25 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.16<-17344 Statuses=0008 0009 16:34:25 Msec=2250 True Az=176.025 Ze=-80.16 Az status=0008 Ze status=0009 16:34:25 Check angles 16:34:25 SkyScan query 16:34:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.19<-15946 Statuses=0008 0009 16:34:25 Msec=3000 True Az=175.995 Ze=-59.19 Az status=0008 Ze status=0009 16:34:26 Check angles 16:34:26 SkyScan query 16:34:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:34:26 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:34:26 Message to Master queued w/err=0: serial=70734 error=0 16:34:31 Received message from Master: op=Filter serial=70735 16:34:31 Color wheel filter change from 0 to 0 16:34:31 FLIGetFilterPos err=0 currentPosition=0 16:34:31 FLIGetStepsRemaining err=0 RemainingSteps=0 16:34:31 Filter is already there-color wheel unchanged 16:34:31 Received message from Master: op=Shutter serial=70736 16:34:31 Shutter LASER close 16:34:32 Received message from Camera: op=State serial=70738 16:34:32 GetSingleValue result=40 Value=cccccccc 16:34:32 SkyScan query 16:34:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:34:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:34:32 Parameters OK 16:34:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:34:32 Set A/D data flow result=40 16:34:32 Set A/D channel type result=40 16:34:32 Set A/D encoding result=40 16:34:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:34:32 Set channel filter=0.000000e+000 result=40 16:34:32 Config A/D Result=40 16:34:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:34:32 Get A/D filter: -9.255963e+061 result=40 16:34:32 Get A/D value=-858993460 result=40 16:34:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:34:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:34:32 Parameters OK 16:34:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:34:32 Set A/D data flow result=40 16:34:32 Set A/D channel type result=40 16:34:32 Set A/D encoding result=40 16:34:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:34:32 Set channel filter=0.000000e+000 result=40 16:34:32 Config A/D Result=40 16:34:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:34:32 Get A/D filter: -9.255963e+061 result=40 16:34:32 Get A/D value=-858993460 result=40 16:34:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:34:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:34:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:34:32 Aux= 16:34:32 Message to Camera, serial 70738 queued 16:35:09 Received message from Master: op=PointingHead serial=70751 16:35:09 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:35:09 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:35:09 Point started: ret=0 16:35:09 point_skyscan result=0 16:35:10 Check angles 16:35:10 SkyScan query 16:35:11 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.39<-13426 Statuses=0009 0009 16:35:11 Msec=0 True Az=152.76 Ze=-21.39 Az status=0009 Ze status=0009 16:35:11 Check angles 16:35:11 SkyScan query 16:35:11 SkyScan query done: ret=0 az=135.27<-9018 ze=-0.405<-12027 Statuses=0009 0009 16:35:11 Msec=750 True Az=135.27 Ze=-0.405 Az status=0009 Ze status=0009 16:35:12 Check angles 16:35:12 SkyScan query 16:35:12 SkyScan query done: ret=0 az=117.6<-7840 ze=20.535<-10631 Statuses=0009 0009 16:35:12 Msec=1500 True Az=117.6 Ze=20.535 Az status=0009 Ze status=0009 16:35:12 Check angles 16:35:12 SkyScan query 16:35:13 SkyScan query done: ret=0 az=100.2<-6680 ze=41.505<-9233 Statuses=0009 0009 16:35:13 Msec=2250 True Az=100.2 Ze=41.505 Az status=0009 Ze status=0009 16:35:13 Check angles 16:35:13 SkyScan query 16:35:14 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 16:35:14 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 16:35:14 Check angles 16:35:14 SkyScan query 16:35:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:35:14 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:35:14 Message to Master queued w/err=0: serial=70751 error=0 16:35:19 Received message from Master: op=Filter serial=70752 16:35:19 Color wheel filter change from 0 to 0 16:35:19 FLIGetFilterPos err=0 currentPosition=0 16:35:19 FLIGetStepsRemaining err=0 RemainingSteps=0 16:35:19 Filter is already there-color wheel unchanged 16:35:20 Received message from Master: op=Shutter serial=70753 16:35:20 Shutter LASER close 16:35:20 Received message from Camera: op=State serial=70755 16:35:20 GetSingleValue result=40 Value=cccccccc 16:35:20 SkyScan query 16:35:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:35:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:35:20 Parameters OK 16:35:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:35:20 Set A/D data flow result=40 16:35:20 Set A/D channel type result=40 16:35:20 Set A/D encoding result=40 16:35:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:35:20 Set channel filter=0.000000e+000 result=40 16:35:20 Config A/D Result=40 16:35:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:35:20 Get A/D filter: -9.255963e+061 result=40 16:35:20 Get A/D value=-858993460 result=40 16:35:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:35:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:35:20 Parameters OK 16:35:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:35:20 Set A/D data flow result=40 16:35:20 Set A/D channel type result=40 16:35:20 Set A/D encoding result=40 16:35:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:35:20 Set channel filter=0.000000e+000 result=40 16:35:20 Config A/D Result=40 16:35:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:35:20 Get A/D filter: -9.255963e+061 result=40 16:35:20 Get A/D value=-858993460 result=40 16:35:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:35:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:35:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:35:20 Aux= 16:35:20 Message to Camera, serial 70755 queued [UTC 2018-12-11 16:35:54] 16:35:57 Received message from Master: op=PointingHead serial=70768 16:35:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:35:57 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:35:57 Point started: ret=0 16:35:57 point_skyscan result=0 16:35:58 Check angles 16:35:58 SkyScan query 16:35:59 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 16:35:59 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 16:35:59 Check angles 16:35:59 SkyScan query 16:36:00 SkyScan query done: ret=0 az=126.375<-8425 ze=38.505<-9433 Statuses=0009 0008 16:36:00 Msec=750 True Az=126.375 Ze=38.505 Az status=0009 Ze status=0008 16:36:00 Check angles 16:36:00 SkyScan query 16:36:00 SkyScan query done: ret=0 az=143.85<-9590 ze=38.505<-9433 Statuses=0009 0008 16:36:00 Msec=1500 True Az=143.85 Ze=38.505 Az status=0009 Ze status=0008 16:36:00 Check angles 16:36:00 SkyScan query 16:36:01 SkyScan query done: ret=0 az=161.145<-10743 ze=38.505<-9433 Statuses=0009 0008 16:36:01 Msec=2250 True Az=161.145 Ze=38.505 Az status=0009 Ze status=0008 16:36:01 Check angles 16:36:01 SkyScan query 16:36:02 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 16:36:02 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 16:36:02 Check angles 16:36:02 SkyScan query 16:36:03 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:36:03 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:36:03 Message to Master queued w/err=0: serial=70768 error=0 16:36:08 Received message from Master: op=Filter serial=70769 16:36:08 Color wheel filter change from 0 to 0 16:36:08 FLIGetFilterPos err=0 currentPosition=0 16:36:08 FLIGetStepsRemaining err=0 RemainingSteps=0 16:36:08 Filter is already there-color wheel unchanged 16:36:08 Received message from Master: op=Shutter serial=70770 16:36:08 Shutter LASER close 16:36:08 Received message from Camera: op=State serial=70772 16:36:08 GetSingleValue result=40 Value=cccccccc 16:36:08 SkyScan query 16:36:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:36:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:36:08 Parameters OK 16:36:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:36:08 Set A/D data flow result=40 16:36:08 Set A/D channel type result=40 16:36:08 Set A/D encoding result=40 16:36:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:36:08 Set channel filter=0.000000e+000 result=40 16:36:08 Config A/D Result=40 16:36:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:36:08 Get A/D filter: -9.255963e+061 result=40 16:36:08 Get A/D value=-858993460 result=40 16:36:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:36:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:36:08 Parameters OK 16:36:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:36:08 Set A/D data flow result=40 16:36:08 Set A/D channel type result=40 16:36:08 Set A/D encoding result=40 16:36:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:36:08 Set channel filter=0.000000e+000 result=40 16:36:08 Config A/D Result=40 16:36:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:36:08 Get A/D filter: -9.255963e+061 result=40 16:36:08 Get A/D value=-858993460 result=40 16:36:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:36:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:36:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:36:08 Aux= 16:36:08 Message to Camera, serial 70772 queued 16:36:44 Received message from Master: op=PointingHead serial=70784 16:36:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:36:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:36:45 Point started: ret=0 16:36:45 point_skyscan result=0 16:36:45 Check angles 16:36:45 SkyScan query 16:36:46 SkyScan query done: ret=0 az=152.61<-10174 ze=8.385<-11441 Statuses=0009 0009 16:36:46 Msec=0 True Az=152.61 Ze=8.385 Az status=0009 Ze status=0009 16:36:46 Check angles 16:36:46 SkyScan query 16:36:47 SkyScan query done: ret=0 az=135.21<-9014 ze=-12.54<-12836 Statuses=0009 0009 16:36:47 Msec=750 True Az=135.21 Ze=-12.54 Az status=0009 Ze status=0009 16:36:47 Check angles 16:36:47 SkyScan query 16:36:47 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.48<-14232 Statuses=0009 0009 16:36:47 Msec=1500 True Az=117.57 Ze=-33.48 Az status=0009 Ze status=0009 16:36:48 Check angles 16:36:48 SkyScan query 16:36:48 SkyScan query done: ret=0 az=100.215<-6681 ze=-51.555<-15437 Statuses=0009 0009 16:36:48 Msec=2250 True Az=100.215 Ze=-51.555 Az status=0009 Ze status=0009 16:36:48 Check angles 16:36:48 SkyScan query 16:36:49 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 16:36:49 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 16:36:49 Check angles 16:36:49 SkyScan query 16:36:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:36:50 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:36:50 Message to Master queued w/err=0: serial=70784 error=0 16:36:55 Received message from Master: op=Filter serial=70785 16:36:55 Color wheel filter change from 0 to 0 16:36:55 FLIGetFilterPos err=0 currentPosition=0 16:36:55 FLIGetStepsRemaining err=0 RemainingSteps=0 16:36:55 Filter is already there-color wheel unchanged 16:36:55 Received message from Master: op=Shutter serial=70786 16:36:55 Shutter LASER close 16:36:55 Received message from Camera: op=State serial=70788 16:36:55 GetSingleValue result=40 Value=cccccccc 16:36:55 SkyScan query 16:36:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:36:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:36:55 Parameters OK 16:36:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:36:55 Set A/D data flow result=40 16:36:55 Set A/D channel type result=40 16:36:55 Set A/D encoding result=40 16:36:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:36:55 Set channel filter=0.000000e+000 result=40 16:36:55 Config A/D Result=40 16:36:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:36:55 Get A/D filter: -9.255963e+061 result=40 16:36:55 Get A/D value=-858993460 result=40 16:36:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:36:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:36:55 Parameters OK 16:36:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:36:55 Set A/D data flow result=40 16:36:55 Set A/D channel type result=40 16:36:55 Set A/D encoding result=40 16:36:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:36:55 Set channel filter=0.000000e+000 result=40 16:36:55 Config A/D Result=40 16:36:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:36:55 Get A/D filter: -9.255963e+061 result=40 16:36:55 Get A/D value=-858993460 result=40 16:36:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:36:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:36:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:36:55 Aux= 16:36:55 Message to Camera, serial 70788 queued 16:37:32 Received message from Master: op=PointingHead serial=70801 16:37:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:37:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:37:33 Point started: ret=0 16:37:33 point_skyscan result=0 16:37:33 Check angles 16:37:33 SkyScan query 16:37:34 SkyScan query done: ret=0 az=109.23<-7282 ze=-81.42<-17428 Statuses=0009 0009 16:37:34 Msec=0 True Az=109.23 Ze=-81.42 Az status=0009 Ze status=0009 16:37:34 Check angles 16:37:34 SkyScan query 16:37:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.405<-18827 Statuses=0008 0009 16:37:35 Msec=750 True Az=112.995 Ze=-102.405 Az status=0008 Ze status=0009 16:37:35 Check angles 16:37:35 SkyScan query 16:37:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.315<-20221 Statuses=0008 0009 16:37:35 Msec=1500 True Az=112.995 Ze=-123.315 Az status=0008 Ze status=0009 16:37:36 Check angles 16:37:36 SkyScan query 16:37:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.285<-21619 Statuses=0008 0009 16:37:36 Msec=2250 True Az=112.995 Ze=-144.285 Az status=0008 Ze status=0009 16:37:36 Check angles 16:37:36 SkyScan query 16:37:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.225<-23015 Statuses=0008 0009 16:37:37 Msec=3000 True Az=112.995 Ze=-165.225 Az status=0008 Ze status=0009 16:37:37 Check angles 16:37:37 SkyScan query 16:37:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:37:38 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:37:38 Message to Master queued w/err=0: serial=70801 error=0 16:37:43 Received message from Master: op=Filter serial=70802 16:37:43 Color wheel filter change from 0 to 0 16:37:43 FLIGetFilterPos err=0 currentPosition=0 16:37:43 FLIGetStepsRemaining err=0 RemainingSteps=0 16:37:43 Filter is already there-color wheel unchanged 16:37:43 Received message from Master: op=Shutter serial=70803 16:37:43 Shutter LASER open 16:37:43 Received message from Camera: op=State serial=70805 16:37:43 GetSingleValue result=40 Value=cccccccc 16:37:43 SkyScan query 16:37:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:37:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:37:44 Parameters OK 16:37:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:37:44 Set A/D data flow result=40 16:37:44 Set A/D channel type result=40 16:37:44 Set A/D encoding result=40 16:37:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:37:44 Set channel filter=0.000000e+000 result=40 16:37:44 Config A/D Result=40 16:37:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:37:44 Get A/D filter: -9.255963e+061 result=40 16:37:44 Get A/D value=-858993460 result=40 16:37:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:37:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:37:44 Parameters OK 16:37:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:37:44 Set A/D data flow result=40 16:37:44 Set A/D channel type result=40 16:37:44 Set A/D encoding result=40 16:37:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:37:44 Set channel filter=0.000000e+000 result=40 16:37:44 Config A/D Result=40 16:37:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:37:44 Get A/D filter: -9.255963e+061 result=40 16:37:44 Get A/D value=-858993460 result=40 16:37:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:37:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:37:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:37:44 Aux= 16:37:44 Message to Camera, serial 70805 queued 16:37:52 Received message from Master: op=Shutter serial=70815 16:37:52 Shutter LASER close 16:37:53 Received message from Master: op=PointingHead serial=70819 16:37:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:37:53 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:37:53 Point started: ret=0 16:37:53 point_skyscan result=0 16:37:54 Check angles 16:37:54 SkyScan query 16:37:54 SkyScan query done: ret=0 az=89.835<-5989 ze=157.08<-1528 Statuses=0009 0009 16:37:54 Msec=0 True Az=89.835 Ze=157.08 Az status=0009 Ze status=0009 16:37:54 Check angles 16:37:54 SkyScan query 16:37:55 SkyScan query done: ret=0 az=71.85<-4790 ze=135.69<-2954 Statuses=0009 0009 16:37:55 Msec=750 True Az=71.85 Ze=135.69 Az status=0009 Ze status=0009 16:37:55 Check angles 16:37:55 SkyScan query 16:37:56 SkyScan query done: ret=0 az=54.72<-3648 ze=114.72<-4352 Statuses=0009 0009 16:37:56 Msec=1500 True Az=54.72 Ze=114.72 Az status=0009 Ze status=0009 16:37:56 Check angles 16:37:56 SkyScan query 16:37:56 SkyScan query done: ret=0 az=40.905<-2727 ze=93.78<-5748 Statuses=0009 0009 16:37:56 Msec=2250 True Az=40.905 Ze=93.78 Az status=0009 Ze status=0009 16:37:57 Check angles 16:37:57 SkyScan query 16:37:57 SkyScan query done: ret=0 az=40.995<-2733 ze=72.81<-7146 Statuses=0008 0009 16:37:57 Msec=3000 True Az=40.995 Ze=72.81 Az status=0008 Ze status=0009 16:37:57 Check angles 16:37:57 SkyScan query 16:37:58 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 16:37:58 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 16:37:58 Check angles 16:37:58 SkyScan query 16:37:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:37:59 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:37:59 Message to Master queued w/err=0: serial=70819 error=0 16:38:04 Received message from Master: op=Filter serial=70820 16:38:04 Color wheel filter change from 0 to 0 16:38:04 FLIGetFilterPos err=0 currentPosition=0 16:38:04 FLIGetStepsRemaining err=0 RemainingSteps=0 16:38:04 Filter is already there-color wheel unchanged 16:38:04 Received message from Master: op=Shutter serial=70821 16:38:04 Shutter LASER close 16:38:04 Received message from Camera: op=State serial=70823 16:38:04 GetSingleValue result=40 Value=cccccccc 16:38:04 SkyScan query 16:38:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:38:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:05 Parameters OK 16:38:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:05 Set A/D data flow result=40 16:38:05 Set A/D channel type result=40 16:38:05 Set A/D encoding result=40 16:38:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:05 Set channel filter=0.000000e+000 result=40 16:38:05 Config A/D Result=40 16:38:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:05 Get A/D filter: -9.255963e+061 result=40 16:38:05 Get A/D value=-858993460 result=40 16:38:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:05 Parameters OK 16:38:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:05 Set A/D data flow result=40 16:38:05 Set A/D channel type result=40 16:38:05 Set A/D encoding result=40 16:38:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:05 Set channel filter=0.000000e+000 result=40 16:38:05 Config A/D Result=40 16:38:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:05 Get A/D filter: -9.255963e+061 result=40 16:38:05 Get A/D value=-858993460 result=40 16:38:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:38:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:38:05 Aux= 16:38:05 Message to Camera, serial 70823 queued 16:38:41 Received message from Master: op=PointingHead serial=70836 16:38:41 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:38:41 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:38:42 Point started: ret=0 16:38:42 point_skyscan result=0 16:38:43 Check angles 16:38:43 SkyScan query 16:38:43 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 16:38:43 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 16:38:43 Check angles 16:38:43 SkyScan query 16:38:44 SkyScan query done: ret=0 az=81.72<-5448 ze=66.51<-7566 Statuses=0009 0008 16:38:44 Msec=750 True Az=81.72 Ze=66.51 Az status=0009 Ze status=0008 16:38:44 Check angles 16:38:44 SkyScan query 16:38:45 SkyScan query done: ret=0 az=99.345<-6623 ze=66.495<-7567 Statuses=0009 0008 16:38:45 Msec=1500 True Az=99.345 Ze=66.495 Az status=0009 Ze status=0008 16:38:45 Check angles 16:38:45 SkyScan query 16:38:45 SkyScan query done: ret=0 az=116.88<-7792 ze=66.495<-7567 Statuses=0009 0008 16:38:45 Msec=2250 True Az=116.88 Ze=66.495 Az status=0009 Ze status=0008 16:38:46 Check angles 16:38:46 SkyScan query 16:38:46 SkyScan query done: ret=0 az=134.655<-8977 ze=66.495<-7567 Statuses=0009 0008 16:38:46 Msec=3000 True Az=134.655 Ze=66.495 Az status=0009 Ze status=0008 16:38:46 Check angles 16:38:46 SkyScan query 16:38:47 SkyScan query done: ret=0 az=152.205<-10147 ze=66.495<-7567 Statuses=0009 0008 16:38:47 Msec=3750 True Az=152.205 Ze=66.495 Az status=0009 Ze status=0008 16:38:47 Check angles 16:38:47 SkyScan query 16:38:48 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:38:48 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 16:38:48 Message to Master queued w/err=0: serial=70836 error=0 16:38:53 Received message from Master: op=Filter serial=70837 16:38:53 Color wheel filter change from 0 to 0 16:38:53 FLIGetFilterPos err=0 currentPosition=0 16:38:53 FLIGetStepsRemaining err=0 RemainingSteps=0 16:38:53 Filter is already there-color wheel unchanged 16:38:53 Received message from Master: op=Shutter serial=70838 16:38:53 Shutter LASER close 16:38:53 Received message from Camera: op=State serial=70840 16:38:53 GetSingleValue result=40 Value=cccccccc 16:38:53 SkyScan query 16:38:53 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:38:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:53 Parameters OK 16:38:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:53 Set A/D data flow result=40 16:38:53 Set A/D channel type result=40 16:38:53 Set A/D encoding result=40 16:38:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:53 Set channel filter=0.000000e+000 result=40 16:38:53 Config A/D Result=40 16:38:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:53 Get A/D filter: -9.255963e+061 result=40 16:38:53 Get A/D value=-858993460 result=40 16:38:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:53 Parameters OK 16:38:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:53 Set A/D data flow result=40 16:38:53 Set A/D channel type result=40 16:38:53 Set A/D encoding result=40 16:38:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:53 Set channel filter=0.000000e+000 result=40 16:38:53 Config A/D Result=40 16:38:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:53 Get A/D filter: -9.255963e+061 result=40 16:38:53 Get A/D value=-858993460 result=40 16:38:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:53 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:38:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:38:53 Aux= 16:38:53 Message to Camera, serial 70840 queued 16:39:30 Received message from Master: op=PointingHead serial=70853 16:39:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:39:30 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:39:31 Point started: ret=0 16:39:31 point_skyscan result=0 16:39:31 Check angles 16:39:31 SkyScan query 16:39:32 SkyScan query done: ret=0 az=135.015<-9001 ze=36.915<-9539 Statuses=0009 0009 16:39:32 Msec=0 True Az=135.015 Ze=36.915 Az status=0009 Ze status=0009 16:39:32 Check angles 16:39:32 SkyScan query 16:39:33 SkyScan query done: ret=0 az=117.51<-7834 ze=15.96<-10936 Statuses=0009 0009 16:39:33 Msec=750 True Az=117.51 Ze=15.96 Az status=0009 Ze status=0009 16:39:33 Check angles 16:39:33 SkyScan query 16:39:33 SkyScan query done: ret=0 az=100.125<-6675 ze=-4.98<-12332 Statuses=0009 0009 16:39:33 Msec=1500 True Az=100.125 Ze=-4.98 Az status=0009 Ze status=0009 16:39:34 Check angles 16:39:34 SkyScan query 16:39:34 SkyScan query done: ret=0 az=82.62<-5508 ze=-25.935<-13729 Statuses=0009 0009 16:39:34 Msec=2250 True Az=82.62 Ze=-25.935 Az status=0009 Ze status=0009 16:39:34 Check angles 16:39:34 SkyScan query 16:39:35 SkyScan query done: ret=0 az=65.19<-4346 ze=-38.565<-14571 Statuses=0009 0008 16:39:35 Msec=3000 True Az=65.19 Ze=-38.565 Az status=0009 Ze status=0008 16:39:35 Check angles 16:39:35 SkyScan query 16:39:36 SkyScan query done: ret=0 az=47.715<-3181 ze=-38.535<-14569 Statuses=0009 0008 16:39:36 Msec=3750 True Az=47.715 Ze=-38.535 Az status=0009 Ze status=0008 16:39:36 Check angles 16:39:36 SkyScan query 16:39:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:39:36 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:39:36 Message to Master queued w/err=0: serial=70853 error=0 16:39:41 Received message from Master: op=Filter serial=70854 16:39:41 Color wheel filter change from 0 to 0 16:39:41 FLIGetFilterPos err=0 currentPosition=0 16:39:41 FLIGetStepsRemaining err=0 RemainingSteps=0 16:39:41 Filter is already there-color wheel unchanged 16:39:42 Received message from Master: op=Shutter serial=70855 16:39:42 Shutter LASER close 16:39:42 Received message from Camera: op=State serial=70857 16:39:42 GetSingleValue result=40 Value=cccccccc 16:39:42 SkyScan query 16:39:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:39:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:39:42 Parameters OK 16:39:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:39:42 Set A/D data flow result=40 16:39:42 Set A/D channel type result=40 16:39:42 Set A/D encoding result=40 16:39:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:39:42 Set channel filter=0.000000e+000 result=40 16:39:42 Config A/D Result=40 16:39:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:39:42 Get A/D filter: -9.255963e+061 result=40 16:39:42 Get A/D value=-858993460 result=40 16:39:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:39:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:39:42 Parameters OK 16:39:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:39:42 Set A/D data flow result=40 16:39:42 Set A/D channel type result=40 16:39:42 Set A/D encoding result=40 16:39:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:39:42 Set channel filter=0.000000e+000 result=40 16:39:42 Config A/D Result=40 16:39:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:39:42 Get A/D filter: -9.255963e+061 result=40 16:39:42 Get A/D value=-858993460 result=40 16:39:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:39:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:39:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:39:42 Aux= 16:39:42 Message to Camera, serial 70857 queued 16:40:19 Received message from Master: op=PointingHead serial=70870 16:40:19 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:40:19 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:40:19 Point started: ret=0 16:40:19 point_skyscan result=0 16:40:20 Check angles 16:40:20 SkyScan query 16:40:21 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.4<-16560 Statuses=0009 0009 16:40:21 Msec=0 True Az=64.2 Ze=-68.4 Az status=0009 Ze status=0009 16:40:21 Check angles 16:40:21 SkyScan query 16:40:22 SkyScan query done: ret=0 az=81.495<-5433 ze=-89.4<-17960 Statuses=0009 0009 16:40:22 Msec=750 True Az=81.495 Ze=-89.4 Az status=0009 Ze status=0009 16:40:22 Check angles 16:40:22 SkyScan query 16:40:22 SkyScan query done: ret=0 az=99.045<-6603 ze=-110.355<-19357 Statuses=0009 0009 16:40:22 Msec=1500 True Az=99.045 Ze=-110.355 Az status=0009 Ze status=0009 16:40:22 Check angles 16:40:22 SkyScan query 16:40:23 SkyScan query done: ret=0 az=116.67<-7778 ze=-131.295<-20753 Statuses=0009 0009 16:40:23 Msec=2250 True Az=116.67 Ze=-131.295 Az status=0009 Ze status=0009 16:40:23 Check angles 16:40:23 SkyScan query 16:40:24 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 16:40:24 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 16:40:24 Check angles 16:40:24 SkyScan query 16:40:25 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:40:25 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:40:25 Message to Master queued w/err=0: serial=70870 error=0 16:40:30 Received message from Master: op=Filter serial=70871 16:40:30 Color wheel filter change from 0 to 0 16:40:30 FLIGetFilterPos err=0 currentPosition=0 16:40:30 FLIGetStepsRemaining err=0 RemainingSteps=0 16:40:30 Filter is already there-color wheel unchanged 16:40:30 Received message from Master: op=Shutter serial=70872 16:40:30 Shutter LASER close 16:40:30 Received message from Camera: op=State serial=70874 16:40:30 GetSingleValue result=40 Value=cccccccc 16:40:30 SkyScan query 16:40:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:40:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:40:30 Parameters OK 16:40:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:40:30 Set A/D data flow result=40 16:40:30 Set A/D channel type result=40 16:40:30 Set A/D encoding result=40 16:40:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:40:30 Set channel filter=0.000000e+000 result=40 16:40:30 Config A/D Result=40 16:40:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:40:30 Get A/D filter: -9.255963e+061 result=40 16:40:30 Get A/D value=-858993460 result=40 16:40:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:40:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:40:30 Parameters OK 16:40:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:40:30 Set A/D data flow result=40 16:40:30 Set A/D channel type result=40 16:40:30 Set A/D encoding result=40 16:40:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:40:30 Set channel filter=0.000000e+000 result=40 16:40:30 Config A/D Result=40 16:40:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:40:30 Get A/D filter: -9.255963e+061 result=40 16:40:30 Get A/D value=-858993460 result=40 16:40:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:40:30 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:40:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:40:30 Aux= 16:40:30 Message to Camera, serial 70874 queued 16:41:06 Received message from Master: op=PointingHead serial=70886 16:41:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:41:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:41:07 Point started: ret=0 16:41:07 point_skyscan result=0 16:41:07 Check angles 16:41:07 SkyScan query 16:41:08 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.06<-23404 Statuses=0009 0009 16:41:08 Msec=0 True Az=113.01 Ze=-171.06 Az status=0009 Ze status=0009 16:41:08 Check angles 16:41:08 SkyScan query 16:41:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:41:09 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:41:09 Message to Master queued w/err=0: serial=70886 error=0 16:41:14 Received message from Master: op=Filter serial=70887 16:41:14 Color wheel filter change from 0 to 0 16:41:14 FLIGetFilterPos err=0 currentPosition=0 16:41:14 FLIGetStepsRemaining err=0 RemainingSteps=0 16:41:14 Filter is already there-color wheel unchanged 16:41:14 Received message from Master: op=Shutter serial=70888 16:41:14 Shutter LASER open 16:41:14 Received message from Camera: op=State serial=70890 16:41:14 GetSingleValue result=40 Value=cccccccc 16:41:14 SkyScan query 16:41:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:41:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:41:15 Parameters OK 16:41:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:41:15 Set A/D data flow result=40 16:41:15 Set A/D channel type result=40 16:41:15 Set A/D encoding result=40 16:41:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:41:15 Set channel filter=0.000000e+000 result=40 16:41:15 Config A/D Result=40 16:41:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:41:15 Get A/D filter: -9.255963e+061 result=40 16:41:15 Get A/D value=-858993460 result=40 16:41:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:41:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:41:15 Parameters OK 16:41:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:41:15 Set A/D data flow result=40 16:41:15 Set A/D channel type result=40 16:41:15 Set A/D encoding result=40 16:41:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:41:15 Set channel filter=0.000000e+000 result=40 16:41:15 Config A/D Result=40 16:41:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:41:15 Get A/D filter: -9.255963e+061 result=40 16:41:15 Get A/D value=-858993460 result=40 16:41:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:41:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:41:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:41:15 Aux= 16:41:15 Message to Camera, serial 70890 queued 16:41:23 Received message from Master: op=Shutter serial=70900 16:41:23 Shutter LASER close 16:41:24 Received message from Master: op=PointingHead serial=70904 16:41:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:41:24 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:41:24 Point started: ret=0 16:41:24 point_skyscan result=0 16:41:25 Check angles 16:41:25 SkyScan query 16:41:25 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.355<-21557 Statuses=0009 0009 16:41:25 Msec=0 True Az=135.885 Ze=-143.355 Az status=0009 Ze status=0009 16:41:25 Check angles 16:41:25 SkyScan query 16:41:26 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.4<-20160 Statuses=0009 0009 16:41:26 Msec=750 True Az=153.36 Ze=-122.4 Az status=0009 Ze status=0009 16:41:26 Check angles 16:41:26 SkyScan query 16:41:27 SkyScan query done: ret=0 az=170.805<-11387 ze=-101.49<-18766 Statuses=0009 0009 16:41:27 Msec=1500 True Az=170.805 Ze=-101.49 Az status=0009 Ze status=0009 16:41:27 Check angles 16:41:27 SkyScan query 16:41:28 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.46<-17364 Statuses=0008 0009 16:41:28 Msec=2250 True Az=176.025 Ze=-80.46 Az status=0008 Ze status=0009 16:41:28 Check angles 16:41:28 SkyScan query 16:41:28 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.07<-15938 Statuses=0008 0009 16:41:28 Msec=3000 True Az=176.01 Ze=-59.07 Az status=0008 Ze status=0009 16:41:28 Check angles 16:41:28 SkyScan query 16:41:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:41:29 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:41:29 Message to Master queued w/err=0: serial=70904 error=0 16:41:34 Received message from Master: op=Filter serial=70905 16:41:34 Color wheel filter change from 0 to 0 16:41:34 FLIGetFilterPos err=0 currentPosition=0 16:41:34 FLIGetStepsRemaining err=0 RemainingSteps=0 16:41:34 Filter is already there-color wheel unchanged 16:41:34 Received message from Master: op=Shutter serial=70906 16:41:34 Shutter LASER close 16:41:34 Received message from Camera: op=State serial=70908 16:41:34 GetSingleValue result=40 Value=cccccccc 16:41:34 SkyScan query 16:41:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:41:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:41:35 Parameters OK 16:41:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:41:35 Set A/D data flow result=40 16:41:35 Set A/D channel type result=40 16:41:35 Set A/D encoding result=40 16:41:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:41:35 Set channel filter=0.000000e+000 result=40 16:41:35 Config A/D Result=40 16:41:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:41:35 Get A/D filter: -9.255963e+061 result=40 16:41:35 Get A/D value=-858993460 result=40 16:41:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:41:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:41:35 Parameters OK 16:41:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:41:35 Set A/D data flow result=40 16:41:35 Set A/D channel type result=40 16:41:35 Set A/D encoding result=40 16:41:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:41:35 Set channel filter=0.000000e+000 result=40 16:41:35 Config A/D Result=40 16:41:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:41:35 Get A/D filter: -9.255963e+061 result=40 16:41:35 Get A/D value=-858993460 result=40 16:41:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:41:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:41:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:41:35 Aux= 16:41:35 Message to Camera, serial 70908 queued 16:42:12 Received message from Master: op=PointingHead serial=70921 16:42:12 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:42:12 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:42:12 Point started: ret=0 16:42:12 point_skyscan result=0 16:42:13 Check angles 16:42:13 SkyScan query 16:42:14 SkyScan query done: ret=0 az=152.625<-10175 ze=-21.195<-13413 Statuses=0009 0009 16:42:14 Msec=0 True Az=152.625 Ze=-21.195 Az status=0009 Ze status=0009 16:42:14 Check angles 16:42:14 SkyScan query 16:42:14 SkyScan query done: ret=0 az=135.045<-9003 ze=-0.24<-12016 Statuses=0009 0009 16:42:14 Msec=750 True Az=135.045 Ze=-0.24 Az status=0009 Ze status=0009 16:42:14 Check angles 16:42:14 SkyScan query 16:42:15 SkyScan query done: ret=0 az=117.54<-7836 ze=20.685<-10621 Statuses=0009 0009 16:42:15 Msec=1500 True Az=117.54 Ze=20.685 Az status=0009 Ze status=0009 16:42:15 Check angles 16:42:15 SkyScan query 16:42:16 SkyScan query done: ret=0 az=100.2<-6680 ze=41.67<-9222 Statuses=0009 0009 16:42:16 Msec=2250 True Az=100.2 Ze=41.67 Az status=0009 Ze status=0009 16:42:16 Check angles 16:42:16 SkyScan query 16:42:17 SkyScan query done: ret=0 az=86.04<-5736 ze=51.555<-8563 Statuses=0009 0008 16:42:17 Msec=3000 True Az=86.04 Ze=51.555 Az status=0009 Ze status=0008 16:42:17 Check angles 16:42:17 SkyScan query 16:42:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:42:17 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:42:17 Message to Master queued w/err=0: serial=70921 error=0 16:42:22 Received message from Master: op=Filter serial=70922 16:42:22 Color wheel filter change from 0 to 0 16:42:22 FLIGetFilterPos err=0 currentPosition=0 16:42:22 FLIGetStepsRemaining err=0 RemainingSteps=0 16:42:22 Filter is already there-color wheel unchanged 16:42:22 Received message from Master: op=Shutter serial=70923 16:42:22 Shutter LASER close 16:42:22 Received message from Camera: op=State serial=70925 16:42:22 GetSingleValue result=40 Value=cccccccc 16:42:22 SkyScan query 16:42:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:42:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:42:23 Parameters OK 16:42:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:42:23 Set A/D data flow result=40 16:42:23 Set A/D channel type result=40 16:42:23 Set A/D encoding result=40 16:42:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:42:23 Set channel filter=0.000000e+000 result=40 16:42:23 Config A/D Result=40 16:42:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:42:23 Get A/D filter: -9.255963e+061 result=40 16:42:23 Get A/D value=-858993460 result=40 16:42:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:42:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:42:23 Parameters OK 16:42:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:42:23 Set A/D data flow result=40 16:42:23 Set A/D channel type result=40 16:42:23 Set A/D encoding result=40 16:42:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:42:23 Set channel filter=0.000000e+000 result=40 16:42:23 Config A/D Result=40 16:42:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:42:23 Get A/D filter: -9.255963e+061 result=40 16:42:23 Get A/D value=-858993460 result=40 16:42:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:42:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:42:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:42:23 Aux= 16:42:23 Message to Camera, serial 70925 queued 16:43:00 Received message from Master: op=PointingHead serial=70938 16:43:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:43:00 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:43:00 Point started: ret=0 16:43:00 point_skyscan result=0 16:43:01 Check angles 16:43:01 SkyScan query 16:43:02 SkyScan query done: ret=0 az=108.795<-7253 ze=38.49<-9434 Statuses=0009 0008 16:43:02 Msec=0 True Az=108.795 Ze=38.49 Az status=0009 Ze status=0008 16:43:02 Check angles 16:43:02 SkyScan query 16:43:02 SkyScan query done: ret=0 az=126.36<-8424 ze=38.49<-9434 Statuses=0009 0008 16:43:02 Msec=750 True Az=126.36 Ze=38.49 Az status=0009 Ze status=0008 16:43:02 Check angles 16:43:02 SkyScan query 16:43:03 SkyScan query done: ret=0 az=143.82<-9588 ze=38.505<-9433 Statuses=0009 0008 16:43:03 Msec=1500 True Az=143.82 Ze=38.505 Az status=0009 Ze status=0008 16:43:03 Check angles 16:43:03 SkyScan query 16:43:04 SkyScan query done: ret=0 az=161.115<-10741 ze=38.505<-9433 Statuses=0009 0008 16:43:04 Msec=2250 True Az=161.115 Ze=38.505 Az status=0009 Ze status=0008 16:43:04 Check angles 16:43:04 SkyScan query 16:43:05 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 16:43:05 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 16:43:05 Check angles 16:43:05 SkyScan query 16:43:05 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:43:05 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:43:05 Message to Master queued w/err=0: serial=70938 error=0 16:43:10 Received message from Master: op=Filter serial=70939 16:43:10 Color wheel filter change from 0 to 0 16:43:10 FLIGetFilterPos err=0 currentPosition=0 16:43:10 FLIGetStepsRemaining err=0 RemainingSteps=0 16:43:10 Filter is already there-color wheel unchanged 16:43:10 Received message from Master: op=Shutter serial=70940 16:43:10 Shutter LASER close 16:43:11 Received message from Camera: op=State serial=70942 16:43:11 GetSingleValue result=40 Value=cccccccc 16:43:11 SkyScan query 16:43:11 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:43:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:43:11 Parameters OK 16:43:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:43:11 Set A/D data flow result=40 16:43:11 Set A/D channel type result=40 16:43:11 Set A/D encoding result=40 16:43:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:43:11 Set channel filter=0.000000e+000 result=40 16:43:11 Config A/D Result=40 16:43:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:43:11 Get A/D filter: -9.255963e+061 result=40 16:43:11 Get A/D value=-858993460 result=40 16:43:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:43:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:43:11 Parameters OK 16:43:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:43:11 Set A/D data flow result=40 16:43:11 Set A/D channel type result=40 16:43:11 Set A/D encoding result=40 16:43:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:43:11 Set channel filter=0.000000e+000 result=40 16:43:11 Config A/D Result=40 16:43:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:43:11 Get A/D filter: -9.255963e+061 result=40 16:43:11 Get A/D value=-858993460 result=40 16:43:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:43:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:43:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:43:11 Aux= 16:43:11 Message to Camera, serial 70942 queued 16:43:48 Received message from Master: op=PointingHead serial=70955 16:43:48 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:43:48 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:43:48 Point started: ret=0 16:43:48 point_skyscan result=0 16:43:49 Check angles 16:43:49 SkyScan query 16:43:50 SkyScan query done: ret=0 az=152.79<-10186 ze=8.52<-11432 Statuses=0009 0009 16:43:50 Msec=0 True Az=152.79 Ze=8.52 Az status=0009 Ze status=0009 16:43:50 Check angles 16:43:50 SkyScan query 16:43:50 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.435<-12829 Statuses=0009 0009 16:43:50 Msec=750 True Az=135.435 Ze=-12.435 Az status=0009 Ze status=0009 16:43:51 Check angles 16:43:51 SkyScan query 16:43:51 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.33<-14222 Statuses=0009 0009 16:43:51 Msec=1500 True Az=117.78 Ze=-33.33 Az status=0009 Ze status=0009 16:43:51 Check angles 16:43:51 SkyScan query 16:43:52 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.555<-15437 Statuses=0009 0009 16:43:52 Msec=2250 True Az=100.41 Ze=-51.555 Az status=0009 Ze status=0009 16:43:52 Check angles 16:43:52 SkyScan query 16:43:53 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.525<-15435 Statuses=0009 0008 16:43:53 Msec=3000 True Az=86.04 Ze=-51.525 Az status=0009 Ze status=0008 16:43:53 Check angles 16:43:53 SkyScan query 16:43:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:43:53 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:43:53 Message to Master queued w/err=0: serial=70955 error=0 16:43:58 Received message from Master: op=Filter serial=70956 16:43:58 Color wheel filter change from 0 to 0 16:43:58 FLIGetFilterPos err=0 currentPosition=0 16:43:58 FLIGetStepsRemaining err=0 RemainingSteps=0 16:43:58 Filter is already there-color wheel unchanged 16:43:59 Received message from Master: op=Shutter serial=70957 16:43:59 Shutter LASER close 16:43:59 Received message from Camera: op=State serial=70959 16:43:59 GetSingleValue result=40 Value=cccccccc 16:43:59 SkyScan query 16:43:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:43:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:43:59 Parameters OK 16:43:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:43:59 Set A/D data flow result=40 16:43:59 Set A/D channel type result=40 16:43:59 Set A/D encoding result=40 16:43:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:43:59 Set channel filter=0.000000e+000 result=40 16:43:59 Config A/D Result=40 16:43:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:43:59 Get A/D filter: -9.255963e+061 result=40 16:43:59 Get A/D value=-858993460 result=40 16:43:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:43:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:43:59 Parameters OK 16:43:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:43:59 Set A/D data flow result=40 16:43:59 Set A/D channel type result=40 16:43:59 Set A/D encoding result=40 16:43:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:43:59 Set channel filter=0.000000e+000 result=40 16:43:59 Config A/D Result=40 16:43:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:43:59 Get A/D filter: -9.255963e+061 result=40 16:43:59 Get A/D value=-858993460 result=40 16:43:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:43:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:43:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:43:59 Aux= 16:43:59 Message to Camera, serial 70959 queued 16:44:36 Received message from Master: op=PointingHead serial=70972 16:44:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:44:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:44:36 Point started: ret=0 16:44:36 point_skyscan result=0 16:44:37 Check angles 16:44:37 SkyScan query 16:44:38 SkyScan query done: ret=0 az=108.96<-7264 ze=-81.315<-17421 Statuses=0009 0009 16:44:38 Msec=0 True Az=108.96 Ze=-81.315 Az status=0009 Ze status=0009 16:44:38 Check angles 16:44:38 SkyScan query 16:44:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.66<-18844 Statuses=0008 0009 16:44:38 Msec=750 True Az=112.995 Ze=-102.66 Az status=0008 Ze status=0009 16:44:39 Check angles 16:44:39 SkyScan query 16:44:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.6<-20240 Statuses=0008 0009 16:44:39 Msec=1500 True Az=112.995 Ze=-123.6 Az status=0008 Ze status=0009 16:44:39 Check angles 16:44:39 SkyScan query 16:44:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.585<-21639 Statuses=0008 0009 16:44:40 Msec=2250 True Az=112.995 Ze=-144.585 Az status=0008 Ze status=0009 16:44:40 Check angles 16:44:40 SkyScan query 16:44:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.51<-23034 Statuses=0008 0009 16:44:41 Msec=3000 True Az=112.995 Ze=-165.51 Az status=0008 Ze status=0009 16:44:41 Check angles 16:44:41 SkyScan query 16:44:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:44:41 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:44:41 Message to Master queued w/err=0: serial=70972 error=0 16:44:46 Received message from Master: op=Filter serial=70973 16:44:46 Color wheel filter change from 0 to 0 16:44:46 FLIGetFilterPos err=0 currentPosition=0 16:44:46 FLIGetStepsRemaining err=0 RemainingSteps=0 16:44:46 Filter is already there-color wheel unchanged 16:44:47 Received message from Master: op=Shutter serial=70974 16:44:47 Shutter LASER open 16:44:47 Received message from Camera: op=State serial=70976 16:44:47 GetSingleValue result=40 Value=cccccccc 16:44:47 SkyScan query 16:44:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:44:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:44:47 Parameters OK 16:44:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:44:47 Set A/D data flow result=40 16:44:47 Set A/D channel type result=40 16:44:47 Set A/D encoding result=40 16:44:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:44:47 Set channel filter=0.000000e+000 result=40 16:44:47 Config A/D Result=40 16:44:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:44:47 Get A/D filter: -9.255963e+061 result=40 16:44:47 Get A/D value=-858993460 result=40 16:44:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:44:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:44:47 Parameters OK 16:44:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:44:47 Set A/D data flow result=40 16:44:47 Set A/D channel type result=40 16:44:47 Set A/D encoding result=40 16:44:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:44:47 Set channel filter=0.000000e+000 result=40 16:44:47 Config A/D Result=40 16:44:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:44:47 Get A/D filter: -9.255963e+061 result=40 16:44:47 Get A/D value=-858993460 result=40 16:44:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:44:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:44:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:44:47 Aux= 16:44:47 Message to Camera, serial 70976 queued 16:44:56 Received message from Master: op=Shutter serial=70986 16:44:56 Shutter LASER close 16:44:56 Received message from Master: op=PointingHead serial=70990 16:44:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:44:56 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:44:57 Point started: ret=0 16:44:57 point_skyscan result=0 16:44:57 Check angles 16:44:57 SkyScan query 16:44:58 SkyScan query done: ret=0 az=89.895<-5993 ze=157.425<-1505 Statuses=0009 0009 16:44:58 Msec=0 True Az=89.895 Ze=157.425 Az status=0009 Ze status=0009 16:44:58 Check angles 16:44:58 SkyScan query 16:44:59 SkyScan query done: ret=0 az=72.315<-4821 ze=136.44<-2904 Statuses=0009 0009 16:44:59 Msec=750 True Az=72.315 Ze=136.44 Az status=0009 Ze status=0009 16:44:59 Check angles 16:44:59 SkyScan query 16:44:59 SkyScan query done: ret=0 az=54.795<-3653 ze=115.08<-4328 Statuses=0009 0009 16:44:59 Msec=1500 True Az=54.795 Ze=115.08 Az status=0009 Ze status=0009 16:45:00 Check angles 16:45:00 SkyScan query 16:45:00 SkyScan query done: ret=0 az=40.89<-2726 ze=94.08<-5728 Statuses=0009 0009 16:45:00 Msec=2250 True Az=40.89 Ze=94.08 Az status=0009 Ze status=0009 16:45:00 Check angles 16:45:00 SkyScan query 16:45:01 SkyScan query done: ret=0 az=40.995<-2733 ze=72.675<-7155 Statuses=0008 0009 16:45:01 Msec=3000 True Az=40.995 Ze=72.675 Az status=0008 Ze status=0009 16:45:01 Check angles 16:45:01 SkyScan query 16:45:02 SkyScan query done: ret=0 az=40.995<-2733 ze=52.395<-8507 Statuses=0008 0009 16:45:02 Msec=3750 True Az=40.995 Ze=52.395 Az status=0008 Ze status=0009 16:45:02 Check angles 16:45:02 SkyScan query 16:45:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:45:03 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:45:03 Message to Master queued w/err=0: serial=70990 error=0 16:45:08 Received message from Master: op=Filter serial=70991 16:45:08 Color wheel filter change from 0 to 0 16:45:08 FLIGetFilterPos err=0 currentPosition=0 16:45:08 FLIGetStepsRemaining err=0 RemainingSteps=0 16:45:08 Filter is already there-color wheel unchanged 16:45:08 Received message from Master: op=Shutter serial=70992 16:45:08 Shutter LASER close 16:45:08 Received message from Camera: op=State serial=70994 16:45:08 GetSingleValue result=40 Value=cccccccc 16:45:08 SkyScan query 16:45:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:45:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:08 Parameters OK 16:45:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:08 Set A/D data flow result=40 16:45:08 Set A/D channel type result=40 16:45:08 Set A/D encoding result=40 16:45:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:08 Set channel filter=0.000000e+000 result=40 16:45:08 Config A/D Result=40 16:45:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:08 Get A/D filter: -9.255963e+061 result=40 16:45:08 Get A/D value=-858993460 result=40 16:45:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:08 Parameters OK 16:45:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:08 Set A/D data flow result=40 16:45:08 Set A/D channel type result=40 16:45:08 Set A/D encoding result=40 16:45:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:08 Set channel filter=0.000000e+000 result=40 16:45:08 Config A/D Result=40 16:45:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:08 Get A/D filter: -9.255963e+061 result=40 16:45:08 Get A/D value=-858993460 result=40 16:45:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:45:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:45:08 Aux= [UTC 2018-12-11 16:45:08] 16:45:08 Message to Camera, serial 70994 queued 16:45:29 Received message from Master: op=Identify serial=70995 16:45:45 Received message from Master: op=PointingHead serial=71010 16:45:45 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:45:45 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:45:46 Point started: ret=0 16:45:46 point_skyscan result=0 16:45:46 Check angles 16:45:46 SkyScan query 16:45:47 SkyScan query done: ret=0 az=64.44<-4296 ze=66.555<-7563 Statuses=0009 0008 16:45:47 Msec=0 True Az=64.44 Ze=66.555 Az status=0009 Ze status=0008 16:45:47 Check angles 16:45:47 SkyScan query 16:45:48 SkyScan query done: ret=0 az=82.245<-5483 ze=66.495<-7567 Statuses=0009 0008 16:45:48 Msec=750 True Az=82.245 Ze=66.495 Az status=0009 Ze status=0008 16:45:48 Check angles 16:45:48 SkyScan query 16:45:48 SkyScan query done: ret=0 az=99.75<-6650 ze=66.495<-7567 Statuses=0009 0008 16:45:48 Msec=1500 True Az=99.75 Ze=66.495 Az status=0009 Ze status=0008 16:45:49 Check angles 16:45:49 SkyScan query 16:45:49 SkyScan query done: ret=0 az=117.27<-7818 ze=66.495<-7567 Statuses=0009 0008 16:45:49 Msec=2250 True Az=117.27 Ze=66.495 Az status=0009 Ze status=0008 16:45:49 Check angles 16:45:49 SkyScan query 16:45:50 SkyScan query done: ret=0 az=134.76<-8984 ze=66.495<-7567 Statuses=0009 0008 16:45:50 Msec=3000 True Az=134.76 Ze=66.495 Az status=0009 Ze status=0008 16:45:50 Check angles 16:45:50 SkyScan query 16:45:51 SkyScan query done: ret=0 az=152.145<-10143 ze=66.495<-7567 Statuses=0009 0008 16:45:51 Msec=3750 True Az=152.145 Ze=66.495 Az status=0009 Ze status=0008 16:45:51 Check angles 16:45:51 SkyScan query 16:45:51 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 16:45:51 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 16:45:51 Message to Master queued w/err=0: serial=71010 error=0 16:45:56 Received message from Master: op=Filter serial=71011 16:45:56 Color wheel filter change from 0 to 0 16:45:56 FLIGetFilterPos err=0 currentPosition=0 16:45:56 FLIGetStepsRemaining err=0 RemainingSteps=0 16:45:56 Filter is already there-color wheel unchanged 16:45:57 Received message from Master: op=Shutter serial=71012 16:45:57 Shutter LASER close 16:45:57 Received message from Camera: op=State serial=71014 16:45:57 GetSingleValue result=40 Value=cccccccc 16:45:57 SkyScan query 16:45:57 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:45:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:57 Parameters OK 16:45:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:57 Set A/D data flow result=40 16:45:57 Set A/D channel type result=40 16:45:57 Set A/D encoding result=40 16:45:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:57 Set channel filter=0.000000e+000 result=40 16:45:57 Config A/D Result=40 16:45:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:57 Get A/D filter: -9.255963e+061 result=40 16:45:57 Get A/D value=-858993460 result=40 16:45:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:57 Parameters OK 16:45:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:57 Set A/D data flow result=40 16:45:57 Set A/D channel type result=40 16:45:57 Set A/D encoding result=40 16:45:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:57 Set channel filter=0.000000e+000 result=40 16:45:57 Config A/D Result=40 16:45:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:57 Get A/D filter: -9.255963e+061 result=40 16:45:57 Get A/D value=-858993460 result=40 16:45:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:57 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:45:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:45:57 Aux= 16:45:57 Message to Camera, serial 71014 queued 16:46:34 Received message from Master: op=PointingHead serial=71027 16:46:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:46:34 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:46:34 Point started: ret=0 16:46:34 point_skyscan result=0 16:46:35 Check angles 16:46:35 SkyScan query 16:46:36 SkyScan query done: ret=0 az=134.955<-8997 ze=36.675<-9555 Statuses=0009 0009 16:46:36 Msec=0 True Az=134.955 Ze=36.675 Az status=0009 Ze status=0009 16:46:36 Check angles 16:46:36 SkyScan query 16:46:36 SkyScan query done: ret=0 az=117.465<-7831 ze=15.75<-10950 Statuses=0009 0009 16:46:36 Msec=750 True Az=117.465 Ze=15.75 Az status=0009 Ze status=0009 16:46:37 Check angles 16:46:37 SkyScan query 16:46:37 SkyScan query done: ret=0 az=99.735<-6649 ze=-5.655<-12377 Statuses=0009 0009 16:46:37 Msec=1500 True Az=99.735 Ze=-5.655 Az status=0009 Ze status=0009 16:46:37 Check angles 16:46:37 SkyScan query 16:46:38 SkyScan query done: ret=0 az=82.215<-5481 ze=-26.58<-13772 Statuses=0009 0009 16:46:38 Msec=2250 True Az=82.215 Ze=-26.58 Az status=0009 Ze status=0009 16:46:38 Check angles 16:46:38 SkyScan query 16:46:39 SkyScan query done: ret=0 az=64.635<-4309 ze=-38.565<-14571 Statuses=0009 0008 16:46:39 Msec=3000 True Az=64.635 Ze=-38.565 Az status=0009 Ze status=0008 16:46:39 Check angles 16:46:39 SkyScan query 16:46:40 SkyScan query done: ret=0 az=46.935<-3129 ze=-38.535<-14569 Statuses=0009 0008 16:46:40 Msec=3750 True Az=46.935 Ze=-38.535 Az status=0009 Ze status=0008 16:46:40 Check angles 16:46:40 SkyScan query 16:46:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:46:40 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:46:40 Message to Master queued w/err=0: serial=71027 error=0 16:46:45 Received message from Master: op=Filter serial=71028 16:46:45 Color wheel filter change from 0 to 0 16:46:45 FLIGetFilterPos err=0 currentPosition=0 16:46:45 FLIGetStepsRemaining err=0 RemainingSteps=0 16:46:45 Filter is already there-color wheel unchanged 16:46:45 Received message from Master: op=Shutter serial=71029 16:46:45 Shutter LASER close 16:46:45 Received message from Camera: op=State serial=71031 16:46:45 GetSingleValue result=40 Value=cccccccc 16:46:45 SkyScan query 16:46:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:46:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:46:46 Parameters OK 16:46:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:46:46 Set A/D data flow result=40 16:46:46 Set A/D channel type result=40 16:46:46 Set A/D encoding result=40 16:46:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:46:46 Set channel filter=0.000000e+000 result=40 16:46:46 Config A/D Result=40 16:46:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:46:46 Get A/D filter: -9.255963e+061 result=40 16:46:46 Get A/D value=-858993460 result=40 16:46:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:46:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:46:46 Parameters OK 16:46:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:46:46 Set A/D data flow result=40 16:46:46 Set A/D channel type result=40 16:46:46 Set A/D encoding result=40 16:46:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:46:46 Set channel filter=0.000000e+000 result=40 16:46:46 Config A/D Result=40 16:46:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:46:46 Get A/D filter: -9.255963e+061 result=40 16:46:46 Get A/D value=-858993460 result=40 16:46:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:46:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:46:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:46:46 Aux= 16:46:46 Message to Camera, serial 71031 queued 16:47:23 Received message from Master: op=PointingHead serial=71044 16:47:23 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:47:23 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:47:23 Point started: ret=0 16:47:23 point_skyscan result=0 16:47:24 Check angles 16:47:24 SkyScan query 16:47:25 SkyScan query done: ret=0 az=64.41<-4294 ze=-68.745<-16583 Statuses=0009 0009 16:47:25 Msec=0 True Az=64.41 Ze=-68.745 Az status=0009 Ze status=0009 16:47:25 Check angles 16:47:25 SkyScan query 16:47:25 SkyScan query done: ret=0 az=81.72<-5448 ze=-89.715<-17981 Statuses=0009 0009 16:47:25 Msec=750 True Az=81.72 Ze=-89.715 Az status=0009 Ze status=0009 16:47:26 Check angles 16:47:26 SkyScan query 16:47:26 SkyScan query done: ret=0 az=99.435<-6629 ze=-110.685<-19379 Statuses=0009 0009 16:47:26 Msec=1500 True Az=99.435 Ze=-110.685 Az status=0009 Ze status=0009 16:47:26 Check angles 16:47:26 SkyScan query 16:47:27 SkyScan query done: ret=0 az=116.955<-7797 ze=-131.58<-20772 Statuses=0009 0009 16:47:27 Msec=2250 True Az=116.955 Ze=-131.58 Az status=0009 Ze status=0009 16:47:27 Check angles 16:47:27 SkyScan query 16:47:28 SkyScan query done: ret=0 az=131.16<-8744 ze=-141.54<-21436 Statuses=0009 0008 16:47:28 Msec=3000 True Az=131.16 Ze=-141.54 Az status=0009 Ze status=0008 16:47:28 Check angles 16:47:28 SkyScan query 16:47:28 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:47:28 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:47:28 Message to Master queued w/err=0: serial=71044 error=0 16:47:33 Received message from Master: op=Filter serial=71045 16:47:33 Color wheel filter change from 0 to 0 16:47:33 FLIGetFilterPos err=0 currentPosition=0 16:47:33 FLIGetStepsRemaining err=0 RemainingSteps=0 16:47:33 Filter is already there-color wheel unchanged 16:47:34 Received message from Master: op=Shutter serial=71046 16:47:34 Shutter LASER close 16:47:34 Received message from Camera: op=State serial=71048 16:47:34 GetSingleValue result=40 Value=cccccccc 16:47:34 SkyScan query 16:47:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:47:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:47:34 Parameters OK 16:47:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:47:34 Set A/D data flow result=40 16:47:34 Set A/D channel type result=40 16:47:34 Set A/D encoding result=40 16:47:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:47:34 Set channel filter=0.000000e+000 result=40 16:47:34 Config A/D Result=40 16:47:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:47:34 Get A/D filter: -9.255963e+061 result=40 16:47:34 Get A/D value=-858993460 result=40 16:47:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:47:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:47:34 Parameters OK 16:47:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:47:34 Set A/D data flow result=40 16:47:34 Set A/D channel type result=40 16:47:34 Set A/D encoding result=40 16:47:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:47:34 Set channel filter=0.000000e+000 result=40 16:47:34 Config A/D Result=40 16:47:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:47:34 Get A/D filter: -9.255963e+061 result=40 16:47:34 Get A/D value=-858993460 result=40 16:47:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:47:34 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:47:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:47:34 Aux= 16:47:34 Message to Camera, serial 71048 queued 16:48:11 Received message from Master: op=PointingHead serial=71061 16:48:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:48:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:48:11 Point started: ret=0 16:48:11 point_skyscan result=0 16:48:12 Check angles 16:48:12 SkyScan query 16:48:13 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.165<-23411 Statuses=0009 0009 16:48:13 Msec=0 True Az=113.01 Ze=-171.165 Az status=0009 Ze status=0009 16:48:13 Check angles 16:48:13 SkyScan query 16:48:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:48:13 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:48:13 Message to Master queued w/err=0: serial=71061 error=0 16:48:18 Received message from Master: op=Filter serial=71062 16:48:18 Color wheel filter change from 0 to 0 16:48:18 FLIGetFilterPos err=0 currentPosition=0 16:48:18 FLIGetStepsRemaining err=0 RemainingSteps=0 16:48:18 Filter is already there-color wheel unchanged 16:48:19 Received message from Master: op=Shutter serial=71063 16:48:19 Shutter LASER open 16:48:19 Received message from Camera: op=State serial=71065 16:48:19 GetSingleValue result=40 Value=cccccccc 16:48:19 SkyScan query 16:48:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:48:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:19 Parameters OK 16:48:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:19 Set A/D data flow result=40 16:48:19 Set A/D channel type result=40 16:48:19 Set A/D encoding result=40 16:48:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:19 Set channel filter=0.000000e+000 result=40 16:48:19 Config A/D Result=40 16:48:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:19 Get A/D filter: -9.255963e+061 result=40 16:48:19 Get A/D value=-858993460 result=40 16:48:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:19 Parameters OK 16:48:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:19 Set A/D data flow result=40 16:48:19 Set A/D channel type result=40 16:48:19 Set A/D encoding result=40 16:48:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:19 Set channel filter=0.000000e+000 result=40 16:48:19 Config A/D Result=40 16:48:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:19 Get A/D filter: -9.255963e+061 result=40 16:48:19 Get A/D value=-858993460 result=40 16:48:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:48:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:48:19 Aux= 16:48:19 Message to Camera, serial 71065 queued 16:48:28 Received message from Master: op=Shutter serial=71075 16:48:28 Shutter LASER close 16:48:28 Received message from Master: op=PointingHead serial=71079 16:48:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:48:28 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:48:29 Point started: ret=0 16:48:29 point_skyscan result=0 16:48:29 Check angles 16:48:29 SkyScan query 16:48:30 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.205<-21547 Statuses=0009 0009 16:48:30 Msec=0 True Az=135.96 Ze=-143.205 Az status=0009 Ze status=0009 16:48:30 Check angles 16:48:30 SkyScan query 16:48:31 SkyScan query done: ret=0 az=153.42<-10228 ze=-122.25<-20150 Statuses=0009 0009 16:48:31 Msec=750 True Az=153.42 Ze=-122.25 Az status=0009 Ze status=0009 16:48:31 Check angles 16:48:31 SkyScan query 16:48:32 SkyScan query done: ret=0 az=170.91<-11394 ze=-101.355<-18757 Statuses=0009 0009 16:48:32 Msec=1500 True Az=170.91 Ze=-101.355 Az status=0009 Ze status=0009 16:48:32 Check angles 16:48:32 SkyScan query 16:48:32 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.355<-17357 Statuses=0008 0009 16:48:32 Msec=2250 True Az=176.025 Ze=-80.355 Az status=0008 Ze status=0009 16:48:32 Check angles 16:48:32 SkyScan query 16:48:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.415<-15961 Statuses=0008 0009 16:48:33 Msec=3000 True Az=175.995 Ze=-59.415 Az status=0008 Ze status=0009 16:48:33 Check angles 16:48:33 SkyScan query 16:48:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:48:34 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:48:34 Message to Master queued w/err=0: serial=71079 error=0 16:48:39 Received message from Master: op=Filter serial=71080 16:48:39 Color wheel filter change from 0 to 0 16:48:39 FLIGetFilterPos err=0 currentPosition=0 16:48:39 FLIGetStepsRemaining err=0 RemainingSteps=0 16:48:39 Filter is already there-color wheel unchanged 16:48:39 Received message from Master: op=Shutter serial=71081 16:48:39 Shutter LASER close 16:48:39 Received message from Camera: op=State serial=71083 16:48:39 GetSingleValue result=40 Value=cccccccc 16:48:39 SkyScan query 16:48:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:48:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:40 Parameters OK 16:48:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:40 Set A/D data flow result=40 16:48:40 Set A/D channel type result=40 16:48:40 Set A/D encoding result=40 16:48:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:40 Set channel filter=0.000000e+000 result=40 16:48:40 Config A/D Result=40 16:48:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:40 Get A/D filter: -9.255963e+061 result=40 16:48:40 Get A/D value=-858993460 result=40 16:48:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:40 Parameters OK 16:48:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:40 Set A/D data flow result=40 16:48:40 Set A/D channel type result=40 16:48:40 Set A/D encoding result=40 16:48:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:40 Set channel filter=0.000000e+000 result=40 16:48:40 Config A/D Result=40 16:48:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:40 Get A/D filter: -9.255963e+061 result=40 16:48:40 Get A/D value=-858993460 result=40 16:48:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:48:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:48:40 Aux= 16:48:40 Message to Camera, serial 71083 queued 16:49:17 Received message from Master: op=PointingHead serial=71096 16:49:17 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:49:17 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:49:17 Point started: ret=0 16:49:17 point_skyscan result=0 16:49:18 Check angles 16:49:18 SkyScan query 16:49:18 SkyScan query done: ret=0 az=152.79<-10186 ze=-21.54<-13436 Statuses=0009 0009 16:49:18 Msec=0 True Az=152.79 Ze=-21.54 Az status=0009 Ze status=0009 16:49:18 Check angles 16:49:18 SkyScan query 16:49:19 SkyScan query done: ret=0 az=135.465<-9031 ze=-0.57<-12038 Statuses=0009 0009 16:49:19 Msec=750 True Az=135.465 Ze=-0.57 Az status=0009 Ze status=0009 16:49:19 Check angles 16:49:19 SkyScan query 16:49:20 SkyScan query done: ret=0 az=117.765<-7851 ze=20.37<-10642 Statuses=0009 0009 16:49:20 Msec=1500 True Az=117.765 Ze=20.37 Az status=0009 Ze status=0009 16:49:20 Check angles 16:49:20 SkyScan query 16:49:20 SkyScan query done: ret=0 az=100.335<-6689 ze=41.34<-9244 Statuses=0009 0009 16:49:20 Msec=2250 True Az=100.335 Ze=41.34 Az status=0009 Ze status=0009 16:49:21 Check angles 16:49:21 SkyScan query 16:49:21 SkyScan query done: ret=0 az=86.04<-5736 ze=51.525<-8565 Statuses=0009 0008 16:49:21 Msec=3000 True Az=86.04 Ze=51.525 Az status=0009 Ze status=0008 16:49:21 Check angles 16:49:21 SkyScan query 16:49:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:49:22 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 16:49:22 Message to Master queued w/err=0: serial=71096 error=0 16:49:27 Received message from Master: op=Filter serial=71097 16:49:27 Color wheel filter change from 0 to 0 16:49:27 FLIGetFilterPos err=0 currentPosition=0 16:49:27 FLIGetStepsRemaining err=0 RemainingSteps=0 16:49:27 Filter is already there-color wheel unchanged 16:49:27 Received message from Master: op=Shutter serial=71098 16:49:27 Shutter LASER close 16:49:27 Received message from Camera: op=State serial=71100 16:49:27 GetSingleValue result=40 Value=cccccccc 16:49:27 SkyScan query 16:49:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 16:49:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:49:28 Parameters OK 16:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:49:28 Set A/D data flow result=40 16:49:28 Set A/D channel type result=40 16:49:28 Set A/D encoding result=40 16:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:49:28 Set channel filter=0.000000e+000 result=40 16:49:28 Config A/D Result=40 16:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:49:28 Get A/D filter: -9.255963e+061 result=40 16:49:28 Get A/D value=-858993460 result=40 16:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:49:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:49:28 Parameters OK 16:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:49:28 Set A/D data flow result=40 16:49:28 Set A/D channel type result=40 16:49:28 Set A/D encoding result=40 16:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:49:28 Set channel filter=0.000000e+000 result=40 16:49:28 Config A/D Result=40 16:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:49:28 Get A/D filter: -9.255963e+061 result=40 16:49:28 Get A/D value=-858993460 result=40 16:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:49:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:49:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:49:28 Aux= 16:49:28 Message to Camera, serial 71100 queued 16:50:04 Received message from Master: op=PointingHead serial=71112 16:50:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:50:04 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:50:04 Point started: ret=0 16:50:04 point_skyscan result=0 16:50:05 Check angles 16:50:05 SkyScan query 16:50:05 SkyScan query done: ret=0 az=109.05<-7270 ze=38.49<-9434 Statuses=0009 0008 16:50:05 Msec=0 True Az=109.05 Ze=38.49 Az status=0009 Ze status=0008 16:50:06 Check angles 16:50:06 SkyScan query 16:50:06 SkyScan query done: ret=0 az=126.66<-8444 ze=38.505<-9433 Statuses=0009 0008 16:50:06 Msec=750 True Az=126.66 Ze=38.505 Az status=0009 Ze status=0008 16:50:06 Check angles 16:50:06 SkyScan query 16:50:07 SkyScan query done: ret=0 az=144.015<-9601 ze=38.505<-9433 Statuses=0009 0008 16:50:07 Msec=1500 True Az=144.015 Ze=38.505 Az status=0009 Ze status=0008 16:50:07 Check angles 16:50:07 SkyScan query 16:50:08 SkyScan query done: ret=0 az=161.4<-10760 ze=38.505<-9433 Statuses=0009 0008 16:50:08 Msec=2250 True Az=161.4 Ze=38.505 Az status=0009 Ze status=0008 16:50:08 Check angles 16:50:08 SkyScan query 16:50:08 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:50:08 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:50:09 Check angles 16:50:09 SkyScan query 16:50:09 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:50:09 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:50:09 Message to Master queued w/err=0: serial=71112 error=0 16:50:14 Received message from Master: op=Filter serial=71113 16:50:14 Color wheel filter change from 0 to 0 16:50:14 FLIGetFilterPos err=0 currentPosition=0 16:50:14 FLIGetStepsRemaining err=0 RemainingSteps=0 16:50:14 Filter is already there-color wheel unchanged 16:50:14 Received message from Master: op=Shutter serial=71114 16:50:14 Shutter LASER close 16:50:14 Received message from Camera: op=State serial=71116 16:50:14 GetSingleValue result=40 Value=cccccccc 16:50:14 SkyScan query 16:50:15 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:50:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:50:15 Parameters OK 16:50:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:50:15 Set A/D data flow result=40 16:50:15 Set A/D channel type result=40 16:50:15 Set A/D encoding result=40 16:50:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:50:15 Set channel filter=0.000000e+000 result=40 16:50:15 Config A/D Result=40 16:50:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:50:15 Get A/D filter: -9.255963e+061 result=40 16:50:15 Get A/D value=-858993460 result=40 16:50:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:50:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:50:15 Parameters OK 16:50:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:50:15 Set A/D data flow result=40 16:50:15 Set A/D channel type result=40 16:50:15 Set A/D encoding result=40 16:50:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:50:15 Set channel filter=0.000000e+000 result=40 16:50:15 Config A/D Result=40 16:50:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:50:15 Get A/D filter: -9.255963e+061 result=40 16:50:15 Get A/D value=-858993460 result=40 16:50:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:50:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:50:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:50:15 Aux= 16:50:15 Message to Camera, serial 71116 queued 16:50:52 Received message from Master: op=PointingHead serial=71129 16:50:52 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:50:52 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:50:52 Point started: ret=0 16:50:52 point_skyscan result=0 16:50:53 Check angles 16:50:53 SkyScan query 16:50:53 SkyScan query done: ret=0 az=153.12<-10208 ze=8.82<-11412 Statuses=0009 0009 16:50:53 Msec=0 True Az=153.12 Ze=8.82 Az status=0009 Ze status=0009 16:50:54 Check angles 16:50:54 SkyScan query 16:50:54 SkyScan query done: ret=0 az=135.36<-9024 ze=-12.57<-12838 Statuses=0009 0009 16:50:54 Msec=750 True Az=135.36 Ze=-12.57 Az status=0009 Ze status=0009 16:50:54 Check angles 16:50:54 SkyScan query 16:50:55 SkyScan query done: ret=0 az=117.345<-7823 ze=-33.975<-14265 Statuses=0009 0009 16:50:55 Msec=1500 True Az=117.345 Ze=-33.975 Az status=0009 Ze status=0009 16:50:55 Check angles 16:50:55 SkyScan query 16:50:56 SkyScan query done: ret=0 az=100.02<-6668 ze=-51.555<-15437 Statuses=0009 0009 16:50:56 Msec=2250 True Az=100.02 Ze=-51.555 Az status=0009 Ze status=0009 16:50:56 Check angles 16:50:56 SkyScan query 16:50:56 SkyScan query done: ret=0 az=86.055<-5737 ze=-51.54<-15436 Statuses=0009 0008 16:50:56 Msec=3000 True Az=86.055 Ze=-51.54 Az status=0009 Ze status=0008 16:50:57 Check angles 16:50:57 SkyScan query 16:50:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:50:57 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:50:57 Message to Master queued w/err=0: serial=71129 error=0 16:51:02 Received message from Master: op=Filter serial=71130 16:51:02 Color wheel filter change from 0 to 0 16:51:02 FLIGetFilterPos err=0 currentPosition=0 16:51:02 FLIGetStepsRemaining err=0 RemainingSteps=0 16:51:02 Filter is already there-color wheel unchanged 16:51:02 Received message from Master: op=Shutter serial=71131 16:51:02 Shutter LASER close 16:51:02 Received message from Camera: op=State serial=71133 16:51:02 GetSingleValue result=40 Value=cccccccc 16:51:02 SkyScan query 16:51:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:51:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:51:03 Parameters OK 16:51:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:51:03 Set A/D data flow result=40 16:51:03 Set A/D channel type result=40 16:51:03 Set A/D encoding result=40 16:51:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:51:03 Set channel filter=0.000000e+000 result=40 16:51:03 Config A/D Result=40 16:51:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:51:03 Get A/D filter: -9.255963e+061 result=40 16:51:03 Get A/D value=-858993460 result=40 16:51:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:51:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:51:03 Parameters OK 16:51:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:51:03 Set A/D data flow result=40 16:51:03 Set A/D channel type result=40 16:51:03 Set A/D encoding result=40 16:51:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:51:03 Set channel filter=0.000000e+000 result=40 16:51:03 Config A/D Result=40 16:51:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:51:03 Get A/D filter: -9.255963e+061 result=40 16:51:03 Get A/D value=-858993460 result=40 16:51:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:51:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:51:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:51:03 Aux= 16:51:03 Message to Camera, serial 71133 queued 16:51:40 Received message from Master: op=PointingHead serial=71146 16:51:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:51:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:51:40 Point started: ret=0 16:51:40 point_skyscan result=0 16:51:41 Check angles 16:51:41 SkyScan query 16:51:41 SkyScan query done: ret=0 az=108.96<-7264 ze=-81.27<-17418 Statuses=0009 0009 16:51:41 Msec=0 True Az=108.96 Ze=-81.27 Az status=0009 Ze status=0009 16:51:42 Check angles 16:51:42 SkyScan query 16:51:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.21<-18814 Statuses=0008 0009 16:51:42 Msec=750 True Az=112.995 Ze=-102.21 Az status=0008 Ze status=0009 16:51:42 Check angles 16:51:42 SkyScan query 16:51:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.6<-20240 Statuses=0008 0009 16:51:43 Msec=1500 True Az=112.995 Ze=-123.6 Az status=0008 Ze status=0009 16:51:43 Check angles 16:51:43 SkyScan query 16:51:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.99<-21666 Statuses=0008 0009 16:51:44 Msec=2250 True Az=112.995 Ze=-144.99 Az status=0008 Ze status=0009 16:51:44 Check angles 16:51:44 SkyScan query 16:51:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.395<-23093 Statuses=0008 0009 16:51:45 Msec=3000 True Az=112.995 Ze=-166.395 Az status=0008 Ze status=0009 16:51:45 Check angles 16:51:45 SkyScan query 16:51:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:51:45 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:51:45 Message to Master queued w/err=0: serial=71146 error=0 16:51:50 Received message from Master: op=Filter serial=71147 16:51:50 Color wheel filter change from 0 to 0 16:51:50 FLIGetFilterPos err=0 currentPosition=0 16:51:50 FLIGetStepsRemaining err=0 RemainingSteps=0 16:51:50 Filter is already there-color wheel unchanged 16:51:50 Received message from Master: op=Shutter serial=71148 16:51:50 Shutter LASER open 16:51:51 Received message from Camera: op=State serial=71150 16:51:51 GetSingleValue result=40 Value=cccccccc 16:51:51 SkyScan query 16:51:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:51:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:51:51 Parameters OK 16:51:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:51:51 Set A/D data flow result=40 16:51:51 Set A/D channel type result=40 16:51:51 Set A/D encoding result=40 16:51:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:51:51 Set channel filter=0.000000e+000 result=40 16:51:51 Config A/D Result=40 16:51:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:51:51 Get A/D filter: -9.255963e+061 result=40 16:51:51 Get A/D value=-858993460 result=40 16:51:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:51:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:51:51 Parameters OK 16:51:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:51:51 Set A/D data flow result=40 16:51:51 Set A/D channel type result=40 16:51:51 Set A/D encoding result=40 16:51:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:51:51 Set channel filter=0.000000e+000 result=40 16:51:51 Config A/D Result=40 16:51:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:51:51 Get A/D filter: -9.255963e+061 result=40 16:51:51 Get A/D value=-858993460 result=40 16:51:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:51:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:51:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:51:51 Aux= 16:51:51 Message to Camera, serial 71150 queued 16:52:00 Received message from Master: op=Shutter serial=71160 16:52:00 Shutter LASER close 16:52:00 Received message from Master: op=PointingHead serial=71164 16:52:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:52:00 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:52:00 Point started: ret=0 16:52:00 point_skyscan result=0 16:52:01 Check angles 16:52:01 SkyScan query 16:52:02 SkyScan query done: ret=0 az=90.12<-6008 ze=157.53<-1498 Statuses=0009 0009 16:52:02 Msec=0 True Az=90.12 Ze=157.53 Az status=0009 Ze status=0009 16:52:02 Check angles 16:52:02 SkyScan query 16:52:02 SkyScan query done: ret=0 az=72.705<-4847 ze=136.53<-2898 Statuses=0009 0009 16:52:02 Msec=750 True Az=72.705 Ze=136.53 Az status=0009 Ze status=0009 16:52:03 Check angles 16:52:03 SkyScan query 16:52:03 SkyScan query done: ret=0 az=54.93<-3662 ze=115.2<-4320 Statuses=0009 0009 16:52:03 Msec=1500 True Az=54.93 Ze=115.2 Az status=0009 Ze status=0009 16:52:03 Check angles 16:52:03 SkyScan query 16:52:04 SkyScan query done: ret=0 az=40.92<-2728 ze=93.765<-5749 Statuses=0009 0009 16:52:04 Msec=2250 True Az=40.92 Ze=93.765 Az status=0009 Ze status=0009 16:52:04 Check angles 16:52:04 SkyScan query 16:52:05 SkyScan query done: ret=0 az=40.995<-2733 ze=72.795<-7147 Statuses=0008 0009 16:52:05 Msec=3000 True Az=40.995 Ze=72.795 Az status=0008 Ze status=0009 16:52:05 Check angles 16:52:05 SkyScan query 16:52:05 SkyScan query done: ret=0 az=40.995<-2733 ze=52.455<-8503 Statuses=0008 0009 16:52:05 Msec=3750 True Az=40.995 Ze=52.455 Az status=0008 Ze status=0009 16:52:06 Check angles 16:52:06 SkyScan query 16:52:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:52:06 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:52:06 Message to Master queued w/err=0: serial=71164 error=0 16:52:11 Received message from Master: op=Filter serial=71165 16:52:11 Color wheel filter change from 0 to 0 16:52:11 FLIGetFilterPos err=0 currentPosition=0 16:52:11 FLIGetStepsRemaining err=0 RemainingSteps=0 16:52:11 Filter is already there-color wheel unchanged 16:52:11 Received message from Master: op=Shutter serial=71166 16:52:11 Shutter LASER close 16:52:12 Received message from Camera: op=State serial=71168 16:52:12 GetSingleValue result=40 Value=cccccccc 16:52:12 SkyScan query 16:52:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:52:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:52:12 Parameters OK 16:52:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:52:12 Set A/D data flow result=40 16:52:12 Set A/D channel type result=40 16:52:12 Set A/D encoding result=40 16:52:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:52:12 Set channel filter=0.000000e+000 result=40 16:52:12 Config A/D Result=40 16:52:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:52:12 Get A/D filter: -9.255963e+061 result=40 16:52:12 Get A/D value=-858993460 result=40 16:52:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:52:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:52:12 Parameters OK 16:52:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:52:12 Set A/D data flow result=40 16:52:12 Set A/D channel type result=40 16:52:12 Set A/D encoding result=40 16:52:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:52:12 Set channel filter=0.000000e+000 result=40 16:52:12 Config A/D Result=40 16:52:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:52:12 Get A/D filter: -9.255963e+061 result=40 16:52:12 Get A/D value=-858993460 result=40 16:52:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:52:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:52:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:52:12 Aux= 16:52:12 Message to Camera, serial 71168 queued 16:52:48 Received message from Master: op=PointingHead serial=71180 16:52:48 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:52:48 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:52:48 Point started: ret=0 16:52:48 point_skyscan result=0 16:52:49 Check angles 16:52:49 SkyScan query 16:52:50 SkyScan query done: ret=0 az=63.72<-4248 ze=66.54<-7564 Statuses=0009 0008 16:52:50 Msec=0 True Az=63.72 Ze=66.54 Az status=0009 Ze status=0008 16:52:50 Check angles 16:52:50 SkyScan query 16:52:50 SkyScan query done: ret=0 az=81.165<-5411 ze=66.495<-7567 Statuses=0009 0008 16:52:50 Msec=750 True Az=81.165 Ze=66.495 Az status=0009 Ze status=0008 16:52:51 Check angles 16:52:51 SkyScan query 16:52:51 SkyScan query done: ret=0 az=98.565<-6571 ze=66.495<-7567 Statuses=0009 0008 16:52:51 Msec=1500 True Az=98.565 Ze=66.495 Az status=0009 Ze status=0008 16:52:51 Check angles 16:52:51 SkyScan query 16:52:52 SkyScan query done: ret=0 az=116.445<-7763 ze=66.495<-7567 Statuses=0009 0008 16:52:52 Msec=2250 True Az=116.445 Ze=66.495 Az status=0009 Ze status=0008 16:52:52 Check angles 16:52:52 SkyScan query 16:52:53 SkyScan query done: ret=0 az=133.95<-8930 ze=66.495<-7567 Statuses=0009 0008 16:52:53 Msec=3000 True Az=133.95 Ze=66.495 Az status=0009 Ze status=0008 16:52:53 Check angles 16:52:53 SkyScan query 16:52:54 SkyScan query done: ret=0 az=151.8<-10120 ze=66.495<-7567 Statuses=0009 0008 16:52:54 Msec=3750 True Az=151.8 Ze=66.495 Az status=0009 Ze status=0008 16:52:54 Check angles 16:52:54 SkyScan query 16:52:54 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:52:54 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:52:54 Message to Master queued w/err=0: serial=71180 error=0 16:52:59 Received message from Master: op=Filter serial=71181 16:52:59 Color wheel filter change from 0 to 0 16:52:59 FLIGetFilterPos err=0 currentPosition=0 16:52:59 FLIGetStepsRemaining err=0 RemainingSteps=0 16:52:59 Filter is already there-color wheel unchanged 16:52:59 Received message from Master: op=Shutter serial=71182 16:52:59 Shutter LASER close 16:52:59 Received message from Camera: op=State serial=71184 16:52:59 GetSingleValue result=40 Value=cccccccc 16:52:59 SkyScan query 16:53:00 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:53:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:00 Parameters OK 16:53:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:00 Set A/D data flow result=40 16:53:00 Set A/D channel type result=40 16:53:00 Set A/D encoding result=40 16:53:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:00 Set channel filter=0.000000e+000 result=40 16:53:00 Config A/D Result=40 16:53:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:00 Get A/D filter: -9.255963e+061 result=40 16:53:00 Get A/D value=-858993460 result=40 16:53:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:00 Parameters OK 16:53:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:00 Set A/D data flow result=40 16:53:00 Set A/D channel type result=40 16:53:00 Set A/D encoding result=40 16:53:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:00 Set channel filter=0.000000e+000 result=40 16:53:00 Config A/D Result=40 16:53:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:00 Get A/D filter: -9.255963e+061 result=40 16:53:00 Get A/D value=-858993460 result=40 16:53:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:00 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:53:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:53:00 Aux= 16:53:00 Message to Camera, serial 71184 queued 16:53:37 Received message from Master: op=PointingHead serial=71197 16:53:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:53:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:53:37 Point started: ret=0 16:53:37 point_skyscan result=0 16:53:38 Check angles 16:53:38 SkyScan query 16:53:39 SkyScan query done: ret=0 az=134.97<-8998 ze=36.63<-9558 Statuses=0009 0009 16:53:39 Msec=0 True Az=134.97 Ze=36.63 Az status=0009 Ze status=0009 16:53:39 Check angles 16:53:39 SkyScan query 16:53:39 SkyScan query done: ret=0 az=117.48<-7832 ze=15.735<-10951 Statuses=0009 0009 16:53:39 Msec=750 True Az=117.48 Ze=15.735 Az status=0009 Ze status=0009 16:53:39 Check angles 16:53:39 SkyScan query 16:53:40 SkyScan query done: ret=0 az=99.72<-6648 ze=-5.685<-12379 Statuses=0009 0009 16:53:40 Msec=1500 True Az=99.72 Ze=-5.685 Az status=0009 Ze status=0009 16:53:40 Check angles 16:53:40 SkyScan query 16:53:41 SkyScan query done: ret=0 az=81.9<-5460 ze=-27.09<-13806 Statuses=0009 0009 16:53:41 Msec=2250 True Az=81.9 Ze=-27.09 Az status=0009 Ze status=0009 16:53:41 Check angles 16:53:41 SkyScan query 16:53:42 SkyScan query done: ret=0 az=64.38<-4292 ze=-38.565<-14571 Statuses=0009 0008 16:53:42 Msec=3000 True Az=64.38 Ze=-38.565 Az status=0009 Ze status=0008 16:53:42 Check angles 16:53:42 SkyScan query 16:53:42 SkyScan query done: ret=0 az=46.965<-3131 ze=-38.535<-14569 Statuses=0009 0008 16:53:42 Msec=3750 True Az=46.965 Ze=-38.535 Az status=0009 Ze status=0008 16:53:43 Check angles 16:53:43 SkyScan query 16:53:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:53:43 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:53:43 Message to Master queued w/err=0: serial=71197 error=0 16:53:48 Received message from Master: op=Filter serial=71198 16:53:48 Color wheel filter change from 0 to 0 16:53:48 FLIGetFilterPos err=0 currentPosition=0 16:53:48 FLIGetStepsRemaining err=0 RemainingSteps=0 16:53:48 Filter is already there-color wheel unchanged 16:53:48 Received message from Master: op=Shutter serial=71199 16:53:48 Shutter LASER close 16:53:48 Received message from Camera: op=State serial=71201 16:53:48 GetSingleValue result=40 Value=cccccccc 16:53:48 SkyScan query 16:53:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:53:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:49 Parameters OK 16:53:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:49 Set A/D data flow result=40 16:53:49 Set A/D channel type result=40 16:53:49 Set A/D encoding result=40 16:53:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:49 Set channel filter=0.000000e+000 result=40 16:53:49 Config A/D Result=40 16:53:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:49 Get A/D filter: -9.255963e+061 result=40 16:53:49 Get A/D value=-858993460 result=40 16:53:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:49 Parameters OK 16:53:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:49 Set A/D data flow result=40 16:53:49 Set A/D channel type result=40 16:53:49 Set A/D encoding result=40 16:53:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:49 Set channel filter=0.000000e+000 result=40 16:53:49 Config A/D Result=40 16:53:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:49 Get A/D filter: -9.255963e+061 result=40 16:53:49 Get A/D value=-858993460 result=40 16:53:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:53:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:53:49 Aux= 16:53:49 Message to Camera, serial 71201 queued 16:54:26 Received message from Master: op=PointingHead serial=71214 16:54:26 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:54:26 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:54:26 Point started: ret=0 16:54:26 point_skyscan result=0 16:54:27 Check angles 16:54:27 SkyScan query 16:54:27 SkyScan query done: ret=0 az=63.735<-4249 ze=-67.995<-16533 Statuses=0009 0009 16:54:27 Msec=0 True Az=63.735 Ze=-67.995 Az status=0009 Ze status=0009 16:54:28 Check angles 16:54:28 SkyScan query 16:54:28 SkyScan query done: ret=0 az=81.51<-5434 ze=-89.43<-17962 Statuses=0009 0009 16:54:28 Msec=750 True Az=81.51 Ze=-89.43 Az status=0009 Ze status=0009 16:54:28 Check angles 16:54:28 SkyScan query 16:54:29 SkyScan query done: ret=0 az=99.6<-6640 ze=-110.805<-19387 Statuses=0009 0009 16:54:29 Msec=1500 True Az=99.6 Ze=-110.805 Az status=0009 Ze status=0009 16:54:29 Check angles 16:54:29 SkyScan query 16:54:30 SkyScan query done: ret=0 az=117<-7800 ze=-131.745<-20783 Statuses=0009 0009 16:54:30 Msec=2250 True Az=117 Ze=-131.745 Az status=0009 Ze status=0009 16:54:30 Check angles 16:54:30 SkyScan query 16:54:30 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 16:54:30 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 16:54:31 Check angles 16:54:31 SkyScan query 16:54:31 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:54:31 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:54:31 Message to Master queued w/err=0: serial=71214 error=0 16:54:36 Received message from Master: op=Filter serial=71215 16:54:36 Color wheel filter change from 0 to 0 16:54:36 FLIGetFilterPos err=0 currentPosition=0 16:54:36 FLIGetStepsRemaining err=0 RemainingSteps=0 16:54:36 Filter is already there-color wheel unchanged 16:54:36 Received message from Master: op=Shutter serial=71216 16:54:36 Shutter LASER close 16:54:36 Received message from Camera: op=State serial=71218 16:54:36 GetSingleValue result=40 Value=cccccccc 16:54:36 SkyScan query 16:54:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:54:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:54:37 Parameters OK 16:54:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:54:37 Set A/D data flow result=40 16:54:37 Set A/D channel type result=40 16:54:37 Set A/D encoding result=40 16:54:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:54:37 Set channel filter=0.000000e+000 result=40 16:54:37 Config A/D Result=40 16:54:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:54:37 Get A/D filter: -9.255963e+061 result=40 16:54:37 Get A/D value=-858993460 result=40 16:54:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:54:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:54:37 Parameters OK 16:54:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:54:37 Set A/D data flow result=40 16:54:37 Set A/D channel type result=40 16:54:37 Set A/D encoding result=40 16:54:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:54:37 Set channel filter=0.000000e+000 result=40 16:54:37 Config A/D Result=40 16:54:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:54:37 Get A/D filter: -9.255963e+061 result=40 16:54:37 Get A/D value=-858993460 result=40 16:54:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:54:37 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:54:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:54:37 Aux= 16:54:37 Message to Camera, serial 71218 queued 16:55:13 Received message from Master: op=PointingHead serial=71230 16:55:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:55:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:55:13 Point started: ret=0 16:55:13 point_skyscan result=0 16:55:14 Check angles 16:55:14 SkyScan query 16:55:15 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.255<-23417 Statuses=0009 0009 16:55:15 Msec=0 True Az=113.01 Ze=-171.255 Az status=0009 Ze status=0009 16:55:15 Check angles 16:55:15 SkyScan query 16:55:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:55:15 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:55:15 Message to Master queued w/err=0: serial=71230 error=0 16:55:20 Received message from Master: op=Filter serial=71231 16:55:20 Color wheel filter change from 0 to 0 16:55:20 FLIGetFilterPos err=0 currentPosition=0 16:55:20 FLIGetStepsRemaining err=0 RemainingSteps=0 16:55:20 Filter is already there-color wheel unchanged 16:55:21 Received message from Master: op=Shutter serial=71232 16:55:21 Shutter LASER open 16:55:21 Received message from Camera: op=State serial=71234 16:55:21 GetSingleValue result=40 Value=cccccccc 16:55:21 SkyScan query 16:55:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:55:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:55:21 Parameters OK 16:55:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:55:21 Set A/D data flow result=40 16:55:21 Set A/D channel type result=40 16:55:21 Set A/D encoding result=40 16:55:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:55:21 Set channel filter=0.000000e+000 result=40 16:55:21 Config A/D Result=40 16:55:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:55:21 Get A/D filter: -9.255963e+061 result=40 16:55:21 Get A/D value=-858993460 result=40 16:55:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:55:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:55:21 Parameters OK 16:55:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:55:21 Set A/D data flow result=40 16:55:21 Set A/D channel type result=40 16:55:21 Set A/D encoding result=40 16:55:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:55:21 Set channel filter=0.000000e+000 result=40 16:55:21 Config A/D Result=40 16:55:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:55:21 Get A/D filter: -9.255963e+061 result=40 16:55:21 Get A/D value=-858993460 result=40 16:55:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:55:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:55:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:55:21 Aux= 16:55:21 Message to Camera, serial 71234 queued 16:55:30 Received message from Master: op=Shutter serial=71244 16:55:30 Shutter LASER close 16:55:30 Received message from Master: op=PointingHead serial=71248 16:55:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:55:30 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:55:31 Point started: ret=0 16:55:31 point_skyscan result=0 16:55:31 Check angles 16:55:31 SkyScan query 16:55:32 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.98<-21532 Statuses=0009 0009 16:55:32 Msec=0 True Az=136.215 Ze=-142.98 Az status=0009 Ze status=0009 [UTC 2018-12-11 16:55:32] 16:55:32 Check angles 16:55:32 SkyScan query 16:55:33 SkyScan query done: ret=0 az=155.565<-10371 ze=-119.82<-19988 Statuses=0009 0009 16:55:33 Msec=750 True Az=155.565 Ze=-119.82 Az status=0009 Ze status=0009 16:55:33 Check angles 16:55:33 SkyScan query 16:55:33 SkyScan query done: ret=0 az=171.6<-11440 ze=-100.575<-18705 Statuses=0009 0009 16:55:33 Msec=1500 True Az=171.6 Ze=-100.575 Az status=0009 Ze status=0009 16:55:34 Check angles 16:55:34 SkyScan query 16:55:34 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.68<-17312 Statuses=0008 0009 16:55:34 Msec=2250 True Az=176.025 Ze=-79.68 Az status=0008 Ze status=0009 16:55:34 Check angles 16:55:34 SkyScan query 16:55:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.26<-15884 Statuses=0008 0009 16:55:35 Msec=3000 True Az=176.01 Ze=-58.26 Az status=0008 Ze status=0009 16:55:35 Check angles 16:55:35 SkyScan query 16:55:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 16:55:36 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 16:55:36 Message to Master queued w/err=0: serial=71248 error=0 16:55:41 Received message from Master: op=Filter serial=71249 16:55:41 Color wheel filter change from 0 to 0 16:55:41 FLIGetFilterPos err=0 currentPosition=0 16:55:41 FLIGetStepsRemaining err=0 RemainingSteps=0 16:55:41 Filter is already there-color wheel unchanged 16:55:41 Received message from Master: op=Shutter serial=71250 16:55:41 Shutter LASER close 16:55:41 Received message from Camera: op=State serial=71252 16:55:41 GetSingleValue result=40 Value=cccccccc 16:55:41 SkyScan query 16:55:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:55:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:55:42 Parameters OK 16:55:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:55:42 Set A/D data flow result=40 16:55:42 Set A/D channel type result=40 16:55:42 Set A/D encoding result=40 16:55:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:55:42 Set channel filter=0.000000e+000 result=40 16:55:42 Config A/D Result=40 16:55:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:55:42 Get A/D filter: -9.255963e+061 result=40 16:55:42 Get A/D value=-858993460 result=40 16:55:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:55:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:55:42 Parameters OK 16:55:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:55:42 Set A/D data flow result=40 16:55:42 Set A/D channel type result=40 16:55:42 Set A/D encoding result=40 16:55:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:55:42 Set channel filter=0.000000e+000 result=40 16:55:42 Config A/D Result=40 16:55:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:55:42 Get A/D filter: -9.255963e+061 result=40 16:55:42 Get A/D value=-858993460 result=40 16:55:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:55:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:55:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:55:42 Aux= 16:55:42 Message to Camera, serial 71252 queued [UTC 2018-12-11 16:55:54] 16:56:18 Received message from Master: op=PointingHead serial=71265 16:56:18 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:56:18 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:56:19 Point started: ret=0 16:56:19 point_skyscan result=0 16:56:20 Check angles 16:56:20 SkyScan query 16:56:20 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.885<-13459 Statuses=0009 0009 16:56:20 Msec=0 True Az=152.985 Ze=-21.885 Az status=0009 Ze status=0009 16:56:20 Check angles 16:56:20 SkyScan query 16:56:21 SkyScan query done: ret=0 az=135.66<-9044 ze=-0.885<-12059 Statuses=0009 0009 16:56:21 Msec=750 True Az=135.66 Ze=-0.885 Az status=0009 Ze status=0009 16:56:21 Check angles 16:56:21 SkyScan query 16:56:22 SkyScan query done: ret=0 az=118.08<-7872 ze=20.055<-10663 Statuses=0009 0009 16:56:22 Msec=1500 True Az=118.08 Ze=20.055 Az status=0009 Ze status=0009 16:56:22 Check angles 16:56:22 SkyScan query 16:56:22 SkyScan query done: ret=0 az=100.545<-6703 ze=41.025<-9265 Statuses=0009 0009 16:56:22 Msec=2250 True Az=100.545 Ze=41.025 Az status=0009 Ze status=0009 16:56:23 Check angles 16:56:23 SkyScan query 16:56:23 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 16:56:23 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 16:56:23 Check angles 16:56:23 SkyScan query 16:56:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:56:24 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:56:24 Message to Master queued w/err=0: serial=71265 error=0 16:56:29 Received message from Master: op=Filter serial=71266 16:56:29 Color wheel filter change from 0 to 0 16:56:29 FLIGetFilterPos err=0 currentPosition=0 16:56:29 FLIGetStepsRemaining err=0 RemainingSteps=0 16:56:29 Filter is already there-color wheel unchanged 16:56:29 Received message from Master: op=Shutter serial=71267 16:56:29 Shutter LASER close 16:56:29 Received message from Camera: op=State serial=71269 16:56:29 GetSingleValue result=40 Value=cccccccc 16:56:29 SkyScan query 16:56:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:56:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:56:30 Parameters OK 16:56:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:56:30 Set A/D data flow result=40 16:56:30 Set A/D channel type result=40 16:56:30 Set A/D encoding result=40 16:56:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:56:30 Set channel filter=0.000000e+000 result=40 16:56:30 Config A/D Result=40 16:56:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:56:30 Get A/D filter: -9.255963e+061 result=40 16:56:30 Get A/D value=-858993460 result=40 16:56:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:56:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:56:30 Parameters OK 16:56:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:56:30 Set A/D data flow result=40 16:56:30 Set A/D channel type result=40 16:56:30 Set A/D encoding result=40 16:56:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:56:30 Set channel filter=0.000000e+000 result=40 16:56:30 Config A/D Result=40 16:56:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:56:30 Get A/D filter: -9.255963e+061 result=40 16:56:30 Get A/D value=-858993460 result=40 16:56:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:56:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:56:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:56:30 Aux= 16:56:30 Message to Camera, serial 71269 queued 16:57:07 Received message from Master: op=PointingHead serial=71282 16:57:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:57:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:57:07 Point started: ret=0 16:57:07 point_skyscan result=0 16:57:08 Check angles 16:57:08 SkyScan query 16:57:08 SkyScan query done: ret=0 az=109.2<-7280 ze=38.49<-9434 Statuses=0009 0008 16:57:08 Msec=0 True Az=109.2 Ze=38.49 Az status=0009 Ze status=0008 16:57:08 Check angles 16:57:08 SkyScan query 16:57:09 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 16:57:09 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 16:57:09 Check angles 16:57:09 SkyScan query 16:57:10 SkyScan query done: ret=0 az=144.465<-9631 ze=38.505<-9433 Statuses=0009 0008 16:57:10 Msec=1500 True Az=144.465 Ze=38.505 Az status=0009 Ze status=0008 16:57:10 Check angles 16:57:10 SkyScan query 16:57:11 SkyScan query done: ret=0 az=161.85<-10790 ze=38.505<-9433 Statuses=0009 0008 16:57:11 Msec=2250 True Az=161.85 Ze=38.505 Az status=0009 Ze status=0008 16:57:11 Check angles 16:57:11 SkyScan query 16:57:11 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:57:11 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:57:11 Check angles 16:57:11 SkyScan query 16:57:12 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:57:12 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:57:12 Message to Master queued w/err=0: serial=71282 error=0 16:57:17 Received message from Master: op=Filter serial=71283 16:57:17 Color wheel filter change from 0 to 0 16:57:17 FLIGetFilterPos err=0 currentPosition=0 16:57:17 FLIGetStepsRemaining err=0 RemainingSteps=0 16:57:17 Filter is already there-color wheel unchanged 16:57:17 Received message from Master: op=Shutter serial=71284 16:57:17 Shutter LASER close 16:57:17 Received message from Camera: op=State serial=71286 16:57:17 GetSingleValue result=40 Value=cccccccc 16:57:17 SkyScan query 16:57:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:57:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:57:18 Parameters OK 16:57:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:57:18 Set A/D data flow result=40 16:57:18 Set A/D channel type result=40 16:57:18 Set A/D encoding result=40 16:57:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:57:18 Set channel filter=0.000000e+000 result=40 16:57:18 Config A/D Result=40 16:57:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:57:18 Get A/D filter: -9.255963e+061 result=40 16:57:18 Get A/D value=-858993460 result=40 16:57:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:57:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:57:18 Parameters OK 16:57:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:57:18 Set A/D data flow result=40 16:57:18 Set A/D channel type result=40 16:57:18 Set A/D encoding result=40 16:57:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:57:18 Set channel filter=0.000000e+000 result=40 16:57:18 Config A/D Result=40 16:57:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:57:18 Get A/D filter: -9.255963e+061 result=40 16:57:18 Get A/D value=-858993460 result=40 16:57:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:57:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:57:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:57:18 Aux= 16:57:18 Message to Camera, serial 71286 queued 16:57:55 Received message from Master: op=PointingHead serial=71299 16:57:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:57:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:57:55 Point started: ret=0 16:57:55 point_skyscan result=0 16:57:56 Check angles 16:57:56 SkyScan query 16:57:56 SkyScan query done: ret=0 az=152.985<-10199 ze=8.67<-11422 Statuses=0009 0009 16:57:56 Msec=0 True Az=152.985 Ze=8.67 Az status=0009 Ze status=0009 16:57:56 Check angles 16:57:56 SkyScan query 16:57:57 SkyScan query done: ret=0 az=135.24<-9016 ze=-12.69<-12846 Statuses=0009 0009 16:57:57 Msec=750 True Az=135.24 Ze=-12.69 Az status=0009 Ze status=0009 16:57:57 Check angles 16:57:57 SkyScan query 16:57:58 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.63<-14242 Statuses=0009 0009 16:57:58 Msec=1500 True Az=117.54 Ze=-33.63 Az status=0009 Ze status=0009 16:57:58 Check angles 16:57:58 SkyScan query 16:57:59 SkyScan query done: ret=0 az=100.185<-6679 ze=-51.555<-15437 Statuses=0009 0009 16:57:59 Msec=2250 True Az=100.185 Ze=-51.555 Az status=0009 Ze status=0009 16:57:59 Check angles 16:57:59 SkyScan query 16:57:59 SkyScan query done: ret=0 az=86.04<-5736 ze=-51.54<-15436 Statuses=0009 0008 16:57:59 Msec=3000 True Az=86.04 Ze=-51.54 Az status=0009 Ze status=0008 16:58:00 Check angles 16:58:00 SkyScan query 16:58:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:58:00 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:58:00 Message to Master queued w/err=0: serial=71299 error=0 16:58:05 Received message from Master: op=Filter serial=71300 16:58:05 Color wheel filter change from 0 to 0 16:58:05 FLIGetFilterPos err=0 currentPosition=0 16:58:05 FLIGetStepsRemaining err=0 RemainingSteps=0 16:58:05 Filter is already there-color wheel unchanged 16:58:05 Received message from Master: op=Shutter serial=71301 16:58:05 Shutter LASER close 16:58:05 Received message from Camera: op=State serial=71303 16:58:05 GetSingleValue result=40 Value=cccccccc 16:58:05 SkyScan query 16:58:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:58:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:58:06 Parameters OK 16:58:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:58:06 Set A/D data flow result=40 16:58:06 Set A/D channel type result=40 16:58:06 Set A/D encoding result=40 16:58:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:58:06 Set channel filter=0.000000e+000 result=40 16:58:06 Config A/D Result=40 16:58:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:58:06 Get A/D filter: -9.255963e+061 result=40 16:58:06 Get A/D value=-858993460 result=40 16:58:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:58:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:58:06 Parameters OK 16:58:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:58:06 Set A/D data flow result=40 16:58:06 Set A/D channel type result=40 16:58:06 Set A/D encoding result=40 16:58:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:58:06 Set channel filter=0.000000e+000 result=40 16:58:06 Config A/D Result=40 16:58:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:58:06 Get A/D filter: -9.255963e+061 result=40 16:58:06 Get A/D value=-858993460 result=40 16:58:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:58:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:58:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:58:06 Aux= 16:58:06 Message to Camera, serial 71303 queued 16:58:43 Received message from Master: op=PointingHead serial=71316 16:58:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:58:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:58:43 Point started: ret=0 16:58:43 point_skyscan result=0 16:58:44 Check angles 16:58:44 SkyScan query 16:58:44 SkyScan query done: ret=0 az=108.96<-7264 ze=-81.285<-17419 Statuses=0009 0009 16:58:44 Msec=0 True Az=108.96 Ze=-81.285 Az status=0009 Ze status=0009 16:58:45 Check angles 16:58:45 SkyScan query 16:58:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.72<-18848 Statuses=0008 0009 16:58:45 Msec=750 True Az=112.995 Ze=-102.72 Az status=0008 Ze status=0009 16:58:45 Check angles 16:58:45 SkyScan query 16:58:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.66<-20244 Statuses=0008 0009 16:58:46 Msec=1500 True Az=112.995 Ze=-123.66 Az status=0008 Ze status=0009 16:58:46 Check angles 16:58:46 SkyScan query 16:58:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.6<-21640 Statuses=0008 0009 16:58:47 Msec=2250 True Az=112.995 Ze=-144.6 Az status=0008 Ze status=0009 16:58:47 Check angles 16:58:47 SkyScan query 16:58:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.57<-23038 Statuses=0008 0009 16:58:47 Msec=3000 True Az=112.995 Ze=-165.57 Az status=0008 Ze status=0009 16:58:48 Check angles 16:58:48 SkyScan query 16:58:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:58:48 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:58:48 Message to Master queued w/err=0: serial=71316 error=0 16:58:53 Received message from Master: op=Filter serial=71317 16:58:53 Color wheel filter change from 0 to 0 16:58:53 FLIGetFilterPos err=0 currentPosition=0 16:58:53 FLIGetStepsRemaining err=0 RemainingSteps=0 16:58:53 Filter is already there-color wheel unchanged 16:58:53 Received message from Master: op=Shutter serial=71318 16:58:53 Shutter LASER open 16:58:54 Received message from Camera: op=State serial=71320 16:58:54 GetSingleValue result=40 Value=cccccccc 16:58:54 SkyScan query 16:58:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:58:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:58:54 Parameters OK 16:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:58:54 Set A/D data flow result=40 16:58:54 Set A/D channel type result=40 16:58:54 Set A/D encoding result=40 16:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:58:54 Set channel filter=0.000000e+000 result=40 16:58:54 Config A/D Result=40 16:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:58:54 Get A/D filter: -9.255963e+061 result=40 16:58:54 Get A/D value=-858993460 result=40 16:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:58:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:58:54 Parameters OK 16:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:58:54 Set A/D data flow result=40 16:58:54 Set A/D channel type result=40 16:58:54 Set A/D encoding result=40 16:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:58:54 Set channel filter=0.000000e+000 result=40 16:58:54 Config A/D Result=40 16:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:58:54 Get A/D filter: -9.255963e+061 result=40 16:58:54 Get A/D value=-858993460 result=40 16:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:58:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:58:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:58:54 Aux= 16:58:54 Message to Camera, serial 71320 queued 16:59:03 Received message from Master: op=Shutter serial=71330 16:59:03 Shutter LASER close 16:59:03 Received message from Master: op=PointingHead serial=71334 16:59:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:59:03 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:59:03 Point started: ret=0 16:59:03 point_skyscan result=0 16:59:04 Check angles 16:59:04 SkyScan query 16:59:05 SkyScan query done: ret=0 az=89.88<-5992 ze=157.08<-1528 Statuses=0009 0009 16:59:05 Msec=0 True Az=89.88 Ze=157.08 Az status=0009 Ze status=0009 16:59:05 Check angles 16:59:05 SkyScan query 16:59:05 SkyScan query done: ret=0 az=71.985<-4799 ze=135.825<-2945 Statuses=0009 0009 16:59:05 Msec=750 True Az=71.985 Ze=135.825 Az status=0009 Ze status=0009 16:59:06 Check angles 16:59:06 SkyScan query 16:59:06 SkyScan query done: ret=0 az=54.765<-3651 ze=114.87<-4342 Statuses=0009 0009 16:59:06 Msec=1500 True Az=54.765 Ze=114.87 Az status=0009 Ze status=0009 16:59:06 Check angles 16:59:06 SkyScan query 16:59:07 SkyScan query done: ret=0 az=40.89<-2726 ze=93.9<-5740 Statuses=0009 0009 16:59:07 Msec=2250 True Az=40.89 Ze=93.9 Az status=0009 Ze status=0009 16:59:07 Check angles 16:59:07 SkyScan query 16:59:08 SkyScan query done: ret=0 az=40.995<-2733 ze=72.435<-7171 Statuses=0008 0009 16:59:08 Msec=3000 True Az=40.995 Ze=72.435 Az status=0008 Ze status=0009 16:59:08 Check angles 16:59:08 SkyScan query 16:59:08 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 16:59:08 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 16:59:09 Check angles 16:59:09 SkyScan query 16:59:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:59:09 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:59:09 Message to Master queued w/err=0: serial=71334 error=0 16:59:14 Received message from Master: op=Filter serial=71335 16:59:14 Color wheel filter change from 0 to 0 16:59:14 FLIGetFilterPos err=0 currentPosition=0 16:59:14 FLIGetStepsRemaining err=0 RemainingSteps=0 16:59:14 Filter is already there-color wheel unchanged 16:59:14 Received message from Master: op=Shutter serial=71336 16:59:14 Shutter LASER close 16:59:14 Received message from Camera: op=State serial=71338 16:59:14 GetSingleValue result=40 Value=cccccccc 16:59:14 SkyScan query 16:59:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:59:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:59:15 Parameters OK 16:59:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:59:15 Set A/D data flow result=40 16:59:15 Set A/D channel type result=40 16:59:15 Set A/D encoding result=40 16:59:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:59:15 Set channel filter=0.000000e+000 result=40 16:59:15 Config A/D Result=40 16:59:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:59:15 Get A/D filter: -9.255963e+061 result=40 16:59:15 Get A/D value=-858993460 result=40 16:59:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:59:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:59:15 Parameters OK 16:59:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:59:15 Set A/D data flow result=40 16:59:15 Set A/D channel type result=40 16:59:15 Set A/D encoding result=40 16:59:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:59:15 Set channel filter=0.000000e+000 result=40 16:59:15 Config A/D Result=40 16:59:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:59:15 Get A/D filter: -9.255963e+061 result=40 16:59:15 Get A/D value=-858993460 result=40 16:59:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:59:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:59:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:59:15 Aux= 16:59:15 Message to Camera, serial 71338 queued 16:59:52 Received message from Master: op=PointingHead serial=71351 16:59:52 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:59:52 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:59:52 Point started: ret=0 16:59:52 point_skyscan result=0 16:59:53 Check angles 16:59:53 SkyScan query 16:59:54 SkyScan query done: ret=0 az=63.99<-4266 ze=66.555<-7563 Statuses=0009 0008 16:59:54 Msec=0 True Az=63.99 Ze=66.555 Az status=0009 Ze status=0008 16:59:54 Check angles 16:59:54 SkyScan query 16:59:54 SkyScan query done: ret=0 az=81.345<-5423 ze=66.495<-7567 Statuses=0009 0008 16:59:54 Msec=750 True Az=81.345 Ze=66.495 Az status=0009 Ze status=0008 16:59:54 Check angles 16:59:54 SkyScan query 16:59:55 SkyScan query done: ret=0 az=98.865<-6591 ze=66.495<-7567 Statuses=0009 0008 16:59:55 Msec=1500 True Az=98.865 Ze=66.495 Az status=0009 Ze status=0008 16:59:55 Check angles 16:59:55 SkyScan query 16:59:56 SkyScan query done: ret=0 az=116.82<-7788 ze=66.495<-7567 Statuses=0009 0008 16:59:56 Msec=2250 True Az=116.82 Ze=66.495 Az status=0009 Ze status=0008 16:59:56 Check angles 16:59:56 SkyScan query 16:59:57 SkyScan query done: ret=0 az=134.31<-8954 ze=66.495<-7567 Statuses=0009 0008 16:59:57 Msec=3000 True Az=134.31 Ze=66.495 Az status=0009 Ze status=0008 16:59:57 Check angles 16:59:57 SkyScan query 16:59:57 SkyScan query done: ret=0 az=152.13<-10142 ze=66.495<-7567 Statuses=0009 0008 16:59:57 Msec=3750 True Az=152.13 Ze=66.495 Az status=0009 Ze status=0008 16:59:58 Check angles 16:59:58 SkyScan query 16:59:58 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 16:59:58 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 16:59:58 Message to Master queued w/err=0: serial=71351 error=0 17:00:03 Received message from Master: op=Filter serial=71352 17:00:03 Color wheel filter change from 0 to 0 17:00:03 FLIGetFilterPos err=0 currentPosition=0 17:00:03 FLIGetStepsRemaining err=0 RemainingSteps=0 17:00:03 Filter is already there-color wheel unchanged 17:00:03 Received message from Master: op=Shutter serial=71353 17:00:03 Shutter LASER close 17:00:03 Received message from Camera: op=State serial=71355 17:00:03 GetSingleValue result=40 Value=cccccccc 17:00:03 SkyScan query 17:00:04 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:00:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:00:04 Parameters OK 17:00:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:00:04 Set A/D data flow result=40 17:00:04 Set A/D channel type result=40 17:00:04 Set A/D encoding result=40 17:00:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:00:04 Set channel filter=0.000000e+000 result=40 17:00:04 Config A/D Result=40 17:00:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:00:04 Get A/D filter: -9.255963e+061 result=40 17:00:04 Get A/D value=-858993460 result=40 17:00:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:00:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:00:04 Parameters OK 17:00:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:00:04 Set A/D data flow result=40 17:00:04 Set A/D channel type result=40 17:00:04 Set A/D encoding result=40 17:00:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:00:04 Set channel filter=0.000000e+000 result=40 17:00:04 Config A/D Result=40 17:00:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:00:04 Get A/D filter: -9.255963e+061 result=40 17:00:04 Get A/D value=-858993460 result=40 17:00:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:00:04 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:00:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:00:04 Aux= 17:00:04 Message to Camera, serial 71355 queued 17:00:41 Received message from Master: op=PointingHead serial=71368 17:00:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:00:41 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:00:41 Point started: ret=0 17:00:41 point_skyscan result=0 17:00:42 Check angles 17:00:42 SkyScan query 17:00:42 SkyScan query done: ret=0 az=134.565<-8971 ze=36.24<-9584 Statuses=0009 0009 17:00:42 Msec=0 True Az=134.565 Ze=36.24 Az status=0009 Ze status=0009 17:00:43 Check angles 17:00:43 SkyScan query 17:00:43 SkyScan query done: ret=0 az=117.06<-7804 ze=15.315<-10979 Statuses=0009 0009 17:00:43 Msec=750 True Az=117.06 Ze=15.315 Az status=0009 Ze status=0009 17:00:43 Check angles 17:00:43 SkyScan query 17:00:44 SkyScan query done: ret=0 az=99.39<-6626 ze=-6.105<-12407 Statuses=0009 0009 17:00:44 Msec=1500 True Az=99.39 Ze=-6.105 Az status=0009 Ze status=0009 17:00:44 Check angles 17:00:44 SkyScan query 17:00:45 SkyScan query done: ret=0 az=81.945<-5463 ze=-27.135<-13809 Statuses=0009 0009 17:00:45 Msec=2250 True Az=81.945 Ze=-27.135 Az status=0009 Ze status=0009 17:00:45 Check angles 17:00:45 SkyScan query 17:00:45 SkyScan query done: ret=0 az=64.41<-4294 ze=-38.565<-14571 Statuses=0009 0008 17:00:45 Msec=3000 True Az=64.41 Ze=-38.565 Az status=0009 Ze status=0008 17:00:46 Check angles 17:00:46 SkyScan query 17:00:46 SkyScan query done: ret=0 az=46.5<-3100 ze=-38.52<-14568 Statuses=0009 0008 17:00:46 Msec=3750 True Az=46.5 Ze=-38.52 Az status=0009 Ze status=0008 17:00:46 Check angles 17:00:46 SkyScan query 17:00:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:00:47 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:00:47 Message to Master queued w/err=0: serial=71368 error=0 17:00:52 Received message from Master: op=Filter serial=71369 17:00:52 Color wheel filter change from 0 to 0 17:00:52 FLIGetFilterPos err=0 currentPosition=0 17:00:52 FLIGetStepsRemaining err=0 RemainingSteps=0 17:00:52 Filter is already there-color wheel unchanged 17:00:52 Received message from Master: op=Shutter serial=71370 17:00:52 Shutter LASER close 17:00:52 Received message from Camera: op=State serial=71372 17:00:52 GetSingleValue result=40 Value=cccccccc 17:00:52 SkyScan query 17:00:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:00:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:00:53 Parameters OK 17:00:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:00:53 Set A/D data flow result=40 17:00:53 Set A/D channel type result=40 17:00:53 Set A/D encoding result=40 17:00:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:00:53 Set channel filter=0.000000e+000 result=40 17:00:53 Config A/D Result=40 17:00:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:00:53 Get A/D filter: -9.255963e+061 result=40 17:00:53 Get A/D value=-858993460 result=40 17:00:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:00:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:00:53 Parameters OK 17:00:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:00:53 Set A/D data flow result=40 17:00:53 Set A/D channel type result=40 17:00:53 Set A/D encoding result=40 17:00:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:00:53 Set channel filter=0.000000e+000 result=40 17:00:53 Config A/D Result=40 17:00:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:00:53 Get A/D filter: -9.255963e+061 result=40 17:00:53 Get A/D value=-858993460 result=40 17:00:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:00:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:00:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:00:53 Aux= 17:00:53 Message to Camera, serial 71372 queued 17:01:30 Received message from Master: op=PointingHead serial=71385 17:01:30 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:01:30 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:01:30 Point started: ret=0 17:01:30 point_skyscan result=0 17:01:31 Check angles 17:01:31 SkyScan query 17:01:31 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.775<-16585 Statuses=0009 0009 17:01:31 Msec=0 True Az=64.425 Ze=-68.775 Az status=0009 Ze status=0009 17:01:31 Check angles 17:01:31 SkyScan query 17:01:32 SkyScan query done: ret=0 az=82.2<-5480 ze=-90.15<-18010 Statuses=0009 0009 17:01:32 Msec=750 True Az=82.2 Ze=-90.15 Az status=0009 Ze status=0009 17:01:32 Check angles 17:01:32 SkyScan query 17:01:33 SkyScan query done: ret=0 az=99.84<-6656 ze=-111.135<-19409 Statuses=0009 0009 17:01:33 Msec=1500 True Az=99.84 Ze=-111.135 Az status=0009 Ze status=0009 17:01:33 Check angles 17:01:33 SkyScan query 17:01:34 SkyScan query done: ret=0 az=117.345<-7823 ze=-132.06<-20804 Statuses=0009 0009 17:01:34 Msec=2250 True Az=117.345 Ze=-132.06 Az status=0009 Ze status=0009 17:01:34 Check angles 17:01:34 SkyScan query 17:01:34 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 17:01:34 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 17:01:34 Check angles 17:01:34 SkyScan query 17:01:35 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 17:01:35 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 17:01:35 Message to Master queued w/err=0: serial=71385 error=0 17:01:40 Received message from Master: op=Filter serial=71386 17:01:40 Color wheel filter change from 0 to 0 17:01:40 FLIGetFilterPos err=0 currentPosition=0 17:01:40 FLIGetStepsRemaining err=0 RemainingSteps=0 17:01:40 Filter is already there-color wheel unchanged 17:01:40 Received message from Master: op=Shutter serial=71387 17:01:40 Shutter LASER close 17:01:40 Received message from Camera: op=State serial=71389 17:01:40 GetSingleValue result=40 Value=cccccccc 17:01:40 SkyScan query 17:01:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:01:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:01:41 Parameters OK 17:01:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:01:41 Set A/D data flow result=40 17:01:41 Set A/D channel type result=40 17:01:41 Set A/D encoding result=40 17:01:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:01:41 Set channel filter=0.000000e+000 result=40 17:01:41 Config A/D Result=40 17:01:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:01:41 Get A/D filter: -9.255963e+061 result=40 17:01:41 Get A/D value=-858993460 result=40 17:01:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:01:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:01:41 Parameters OK 17:01:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:01:41 Set A/D data flow result=40 17:01:41 Set A/D channel type result=40 17:01:41 Set A/D encoding result=40 17:01:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:01:41 Set channel filter=0.000000e+000 result=40 17:01:41 Config A/D Result=40 17:01:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:01:41 Get A/D filter: -9.255963e+061 result=40 17:01:41 Get A/D value=-858993460 result=40 17:01:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:01:41 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:01:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:01:41 Aux= 17:01:41 Message to Camera, serial 71389 queued 17:02:18 Received message from Master: op=PointingHead serial=71402 17:02:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:02:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:02:18 Point started: ret=0 17:02:18 point_skyscan result=0 17:02:19 Check angles 17:02:19 SkyScan query 17:02:19 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.045<-23403 Statuses=0009 0009 17:02:19 Msec=0 True Az=113.01 Ze=-171.045 Az status=0009 Ze status=0009 17:02:20 Check angles 17:02:20 SkyScan query 17:02:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 17:02:20 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 17:02:20 Message to Master queued w/err=0: serial=71402 error=0 17:02:25 Received message from Master: op=Filter serial=71403 17:02:25 Color wheel filter change from 0 to 0 17:02:25 FLIGetFilterPos err=0 currentPosition=0 17:02:25 FLIGetStepsRemaining err=0 RemainingSteps=0 17:02:25 Filter is already there-color wheel unchanged 17:02:25 Received message from Master: op=Shutter serial=71404 17:02:25 Shutter LASER open 17:02:25 Received message from Camera: op=State serial=71406 17:02:25 GetSingleValue result=40 Value=cccccccc 17:02:25 SkyScan query 17:02:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:02:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:26 Parameters OK 17:02:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:26 Set A/D data flow result=40 17:02:26 Set A/D channel type result=40 17:02:26 Set A/D encoding result=40 17:02:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:26 Set channel filter=0.000000e+000 result=40 17:02:26 Config A/D Result=40 17:02:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:26 Get A/D filter: -9.255963e+061 result=40 17:02:26 Get A/D value=-858993460 result=40 17:02:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:26 Parameters OK 17:02:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:26 Set A/D data flow result=40 17:02:26 Set A/D channel type result=40 17:02:26 Set A/D encoding result=40 17:02:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:26 Set channel filter=0.000000e+000 result=40 17:02:26 Config A/D Result=40 17:02:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:26 Get A/D filter: -9.255963e+061 result=40 17:02:26 Get A/D value=-858993460 result=40 17:02:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:02:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:02:26 Aux= 17:02:26 Message to Camera, serial 71406 queued 17:02:34 Received message from Master: op=Shutter serial=71416 17:02:34 Shutter LASER close 17:02:35 Received message from Master: op=PointingHead serial=71420 17:02:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:02:35 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:02:35 Point started: ret=0 17:02:35 point_skyscan result=0 17:02:36 Check angles 17:02:36 SkyScan query 17:02:37 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.845<-21523 Statuses=0009 0009 17:02:37 Msec=0 True Az=136.38 Ze=-142.845 Az status=0009 Ze status=0009 17:02:37 Check angles 17:02:37 SkyScan query 17:02:37 SkyScan query done: ret=0 az=153.765<-10251 ze=-121.86<-20124 Statuses=0009 0009 17:02:37 Msec=750 True Az=153.765 Ze=-121.86 Az status=0009 Ze status=0009 17:02:38 Check angles 17:02:38 SkyScan query 17:02:38 SkyScan query done: ret=0 az=171.24<-11416 ze=-100.92<-18728 Statuses=0009 0009 17:02:38 Msec=1500 True Az=171.24 Ze=-100.92 Az status=0009 Ze status=0009 17:02:38 Check angles 17:02:38 SkyScan query 17:02:39 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.545<-17303 Statuses=0008 0009 17:02:39 Msec=2250 True Az=176.025 Ze=-79.545 Az status=0008 Ze status=0009 17:02:39 Check angles 17:02:39 SkyScan query 17:02:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.545<-15903 Statuses=0008 0009 17:02:40 Msec=3000 True Az=175.995 Ze=-58.545 Az status=0008 Ze status=0009 17:02:40 Check angles 17:02:40 SkyScan query 17:02:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 17:02:40 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 17:02:40 Message to Master queued w/err=0: serial=71420 error=0 17:02:45 Received message from Master: op=Filter serial=71421 17:02:45 Color wheel filter change from 0 to 0 17:02:45 FLIGetFilterPos err=0 currentPosition=0 17:02:45 FLIGetStepsRemaining err=0 RemainingSteps=0 17:02:45 Filter is already there-color wheel unchanged 17:02:46 Received message from Master: op=Shutter serial=71422 17:02:46 Shutter LASER close 17:02:46 Received message from Camera: op=State serial=71424 17:02:46 GetSingleValue result=40 Value=cccccccc 17:02:46 SkyScan query 17:02:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:02:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:46 Parameters OK 17:02:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:46 Set A/D data flow result=40 17:02:46 Set A/D channel type result=40 17:02:46 Set A/D encoding result=40 17:02:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:46 Set channel filter=0.000000e+000 result=40 17:02:46 Config A/D Result=40 17:02:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:46 Get A/D filter: -9.255963e+061 result=40 17:02:46 Get A/D value=-858993460 result=40 17:02:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:46 Parameters OK 17:02:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:46 Set A/D data flow result=40 17:02:46 Set A/D channel type result=40 17:02:46 Set A/D encoding result=40 17:02:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:46 Set channel filter=0.000000e+000 result=40 17:02:46 Config A/D Result=40 17:02:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:46 Get A/D filter: -9.255963e+061 result=40 17:02:46 Get A/D value=-858993460 result=40 17:02:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:02:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:02:46 Aux= 17:02:46 Message to Camera, serial 71424 queued 17:03:23 Received message from Master: op=PointingHead serial=71437 17:03:23 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:03:23 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:03:24 Point started: ret=0 17:03:24 point_skyscan result=0 17:03:24 Check angles 17:03:24 SkyScan query 17:03:25 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.75<-13450 Statuses=0009 0009 17:03:25 Msec=0 True Az=152.94 Ze=-21.75 Az status=0009 Ze status=0009 17:03:25 Check angles 17:03:25 SkyScan query 17:03:26 SkyScan query done: ret=0 az=135.525<-9035 ze=-0.66<-12044 Statuses=0009 0009 17:03:26 Msec=750 True Az=135.525 Ze=-0.66 Az status=0009 Ze status=0009 17:03:26 Check angles 17:03:26 SkyScan query 17:03:26 SkyScan query done: ret=0 az=117.795<-7853 ze=20.19<-10654 Statuses=0009 0009 17:03:26 Msec=1500 True Az=117.795 Ze=20.19 Az status=0009 Ze status=0009 17:03:27 Check angles 17:03:27 SkyScan query 17:03:27 SkyScan query done: ret=0 az=100.335<-6689 ze=41.13<-9258 Statuses=0009 0009 17:03:27 Msec=2250 True Az=100.335 Ze=41.13 Az status=0009 Ze status=0009 17:03:27 Check angles 17:03:27 SkyScan query 17:03:28 SkyScan query done: ret=0 az=86.04<-5736 ze=51.54<-8564 Statuses=0009 0008 17:03:28 Msec=3000 True Az=86.04 Ze=51.54 Az status=0009 Ze status=0008 17:03:28 Check angles 17:03:28 SkyScan query 17:03:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:03:29 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:03:29 Message to Master queued w/err=0: serial=71437 error=0 17:03:34 Received message from Master: op=Filter serial=71438 17:03:34 Color wheel filter change from 0 to 0 17:03:34 FLIGetFilterPos err=0 currentPosition=0 17:03:34 FLIGetStepsRemaining err=0 RemainingSteps=0 17:03:34 Filter is already there-color wheel unchanged 17:03:34 Received message from Master: op=Shutter serial=71439 17:03:34 Shutter LASER close 17:03:34 Received message from Camera: op=State serial=71441 17:03:34 GetSingleValue result=40 Value=cccccccc 17:03:34 SkyScan query 17:03:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:03:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:03:34 Parameters OK 17:03:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:03:34 Set A/D data flow result=40 17:03:34 Set A/D channel type result=40 17:03:34 Set A/D encoding result=40 17:03:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:03:34 Set channel filter=0.000000e+000 result=40 17:03:34 Config A/D Result=40 17:03:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:03:34 Get A/D filter: -9.255963e+061 result=40 17:03:34 Get A/D value=-858993460 result=40 17:03:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:03:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:03:34 Parameters OK 17:03:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:03:34 Set A/D data flow result=40 17:03:34 Set A/D channel type result=40 17:03:34 Set A/D encoding result=40 17:03:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:03:34 Set channel filter=0.000000e+000 result=40 17:03:34 Config A/D Result=40 17:03:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:03:34 Get A/D filter: -9.255963e+061 result=40 17:03:34 Get A/D value=-858993460 result=40 17:03:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:03:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:03:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:03:34 Aux= 17:03:34 Message to Camera, serial 71441 queued 17:04:11 Received message from Master: op=PointingHead serial=71454 17:04:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:04:11 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:04:12 Point started: ret=0 17:04:12 point_skyscan result=0 17:04:12 Check angles 17:04:12 SkyScan query 17:04:13 SkyScan query done: ret=0 az=109.425<-7295 ze=38.49<-9434 Statuses=0009 0008 17:04:13 Msec=0 True Az=109.425 Ze=38.49 Az status=0009 Ze status=0008 17:04:13 Check angles 17:04:13 SkyScan query 17:04:14 SkyScan query done: ret=0 az=126.87<-8458 ze=38.505<-9433 Statuses=0009 0008 17:04:14 Msec=750 True Az=126.87 Ze=38.505 Az status=0009 Ze status=0008 17:04:14 Check angles 17:04:14 SkyScan query 17:04:15 SkyScan query done: ret=0 az=144.36<-9624 ze=38.505<-9433 Statuses=0009 0008 17:04:15 Msec=1500 True Az=144.36 Ze=38.505 Az status=0009 Ze status=0008 17:04:15 Check angles 17:04:15 SkyScan query 17:04:15 SkyScan query done: ret=0 az=161.775<-10785 ze=38.505<-9433 Statuses=0009 0008 17:04:15 Msec=2250 True Az=161.775 Ze=38.505 Az status=0009 Ze status=0008 17:04:15 Check angles 17:04:15 SkyScan query 17:04:16 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:04:16 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:04:16 Check angles 17:04:16 SkyScan query 17:04:17 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 17:04:17 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 17:04:17 Message to Master queued w/err=0: serial=71454 error=0 17:04:22 Received message from Master: op=Filter serial=71455 17:04:22 Color wheel filter change from 0 to 0 17:04:22 FLIGetFilterPos err=0 currentPosition=0 17:04:22 FLIGetStepsRemaining err=0 RemainingSteps=0 17:04:22 Filter is already there-color wheel unchanged 17:04:22 Received message from Master: op=Shutter serial=71456 17:04:22 Shutter LASER close 17:04:22 Received message from Camera: op=State serial=71458 17:04:22 GetSingleValue result=40 Value=cccccccc 17:04:22 SkyScan query 17:04:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:04:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:04:23 Parameters OK 17:04:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:04:23 Set A/D data flow result=40 17:04:23 Set A/D channel type result=40 17:04:23 Set A/D encoding result=40 17:04:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:04:23 Set channel filter=0.000000e+000 result=40 17:04:23 Config A/D Result=40 17:04:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:04:23 Get A/D filter: -9.255963e+061 result=40 17:04:23 Get A/D value=-858993460 result=40 17:04:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:04:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:04:23 Parameters OK 17:04:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:04:23 Set A/D data flow result=40 17:04:23 Set A/D channel type result=40 17:04:23 Set A/D encoding result=40 17:04:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:04:23 Set channel filter=0.000000e+000 result=40 17:04:23 Config A/D Result=40 17:04:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:04:23 Get A/D filter: -9.255963e+061 result=40 17:04:23 Get A/D value=-858993460 result=40 17:04:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:04:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:04:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:04:23 Aux= 17:04:23 Message to Camera, serial 71458 queued 17:04:59 Received message from Master: op=PointingHead serial=71471 17:04:59 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:04:59 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:05:00 Point started: ret=0 17:05:00 point_skyscan result=0 17:05:01 Check angles 17:05:01 SkyScan query 17:05:01 SkyScan query done: ret=0 az=152.79<-10186 ze=8.37<-11442 Statuses=0009 0009 17:05:01 Msec=0 True Az=152.79 Ze=8.37 Az status=0009 Ze status=0009 17:05:01 Check angles 17:05:01 SkyScan query 17:05:02 SkyScan query done: ret=0 az=135.36<-9024 ze=-12.57<-12838 Statuses=0009 0009 17:05:02 Msec=750 True Az=135.36 Ze=-12.57 Az status=0009 Ze status=0009 17:05:02 Check angles 17:05:02 SkyScan query 17:05:03 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.51<-14234 Statuses=0009 0009 17:05:03 Msec=1500 True Az=117.795 Ze=-33.51 Az status=0009 Ze status=0009 17:05:03 Check angles 17:05:03 SkyScan query 17:05:03 SkyScan query done: ret=0 az=100.14<-6676 ze=-51.555<-15437 Statuses=0009 0009 17:05:03 Msec=2250 True Az=100.14 Ze=-51.555 Az status=0009 Ze status=0009 17:05:04 Check angles 17:05:04 SkyScan query 17:05:04 SkyScan query done: ret=0 az=85.965<-5731 ze=-51.54<-15436 Statuses=0009 0008 17:05:04 Msec=3000 True Az=85.965 Ze=-51.54 Az status=0009 Ze status=0008 17:05:04 Check angles 17:05:04 SkyScan query 17:05:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:05:05 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:05:05 Message to Master queued w/err=0: serial=71471 error=0 17:05:10 Received message from Master: op=Filter serial=71472 17:05:10 Color wheel filter change from 0 to 0 17:05:10 FLIGetFilterPos err=0 currentPosition=0 17:05:10 FLIGetStepsRemaining err=0 RemainingSteps=0 17:05:10 Filter is already there-color wheel unchanged 17:05:10 Received message from Master: op=Shutter serial=71473 17:05:10 Shutter LASER close 17:05:10 Received message from Camera: op=State serial=71475 17:05:10 GetSingleValue result=40 Value=cccccccc 17:05:10 SkyScan query 17:05:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:05:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:05:11 Parameters OK 17:05:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:05:11 Set A/D data flow result=40 17:05:11 Set A/D channel type result=40 17:05:11 Set A/D encoding result=40 17:05:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:05:11 Set channel filter=0.000000e+000 result=40 17:05:11 Config A/D Result=40 17:05:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:05:11 Get A/D filter: -9.255963e+061 result=40 17:05:11 Get A/D value=-858993460 result=40 17:05:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:05:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:05:11 Parameters OK 17:05:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:05:11 Set A/D data flow result=40 17:05:11 Set A/D channel type result=40 17:05:11 Set A/D encoding result=40 17:05:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:05:11 Set channel filter=0.000000e+000 result=40 17:05:11 Config A/D Result=40 17:05:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:05:11 Get A/D filter: -9.255963e+061 result=40 17:05:11 Get A/D value=-858993460 result=40 17:05:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:05:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:05:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:05:11 Aux= 17:05:11 Message to Camera, serial 71475 queued 17:05:47 Received message from Master: op=PointingHead serial=71488 17:05:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:05:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:05:48 Point started: ret=0 17:05:48 point_skyscan result=0 17:05:49 Check angles 17:05:49 SkyScan query 17:05:49 SkyScan query done: ret=0 az=108.885<-7259 ze=-81.135<-17409 Statuses=0009 0009 17:05:49 Msec=0 True Az=108.885 Ze=-81.135 Az status=0009 Ze status=0009 17:05:49 Check angles 17:05:49 SkyScan query 17:05:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.105<-18807 Statuses=0008 0009 17:05:50 Msec=750 True Az=112.995 Ze=-102.105 Az status=0008 Ze status=0009 17:05:50 Check angles 17:05:50 SkyScan query 17:05:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.075<-20205 Statuses=0008 0009 17:05:51 Msec=1500 True Az=112.995 Ze=-123.075 Az status=0008 Ze status=0009 17:05:51 Check angles 17:05:51 SkyScan query 17:05:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.03<-21602 Statuses=0008 0009 17:05:51 Msec=2250 True Az=112.995 Ze=-144.03 Az status=0008 Ze status=0009 17:05:52 Check angles 17:05:52 SkyScan query 17:05:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.985<-22999 Statuses=0008 0009 17:05:52 Msec=3000 True Az=112.995 Ze=-164.985 Az status=0008 Ze status=0009 17:05:52 Check angles 17:05:52 SkyScan query 17:05:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 17:05:53 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 17:05:53 Message to Master queued w/err=0: serial=71488 error=0 17:05:58 Received message from Master: op=Filter serial=71489 17:05:58 Color wheel filter change from 0 to 0 17:05:58 FLIGetFilterPos err=0 currentPosition=0 17:05:58 FLIGetStepsRemaining err=0 RemainingSteps=0 17:05:58 Filter is already there-color wheel unchanged 17:05:58 Received message from Master: op=Shutter serial=71490 17:05:58 Shutter LASER open 17:05:58 Received message from Camera: op=State serial=71492 17:05:58 GetSingleValue result=40 Value=cccccccc 17:05:58 SkyScan query 17:05:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:05:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:05:59 Parameters OK 17:05:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:05:59 Set A/D data flow result=40 17:05:59 Set A/D channel type result=40 17:05:59 Set A/D encoding result=40 17:05:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:05:59 Set channel filter=0.000000e+000 result=40 17:05:59 Config A/D Result=40 17:05:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:05:59 Get A/D filter: -9.255963e+061 result=40 17:05:59 Get A/D value=-858993460 result=40 17:05:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:05:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:05:59 Parameters OK 17:05:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:05:59 Set A/D data flow result=40 17:05:59 Set A/D channel type result=40 17:05:59 Set A/D encoding result=40 17:05:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:05:59 Set channel filter=0.000000e+000 result=40 17:05:59 Config A/D Result=40 17:05:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:05:59 Get A/D filter: -9.255963e+061 result=40 17:05:59 Get A/D value=-858993460 result=40 17:05:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:05:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:05:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:05:59 Aux= 17:05:59 Message to Camera, serial 71492 queued 17:06:07 Received message from Master: op=Shutter serial=71502 17:06:07 Shutter LASER close 17:06:08 Received message from Master: op=PointingHead serial=71506 17:06:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:06:08 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-11 17:06:08] 17:06:08 Point started: ret=0 17:06:08 point_skyscan result=0 17:06:09 Check angles 17:06:09 SkyScan query 17:06:09 SkyScan query done: ret=0 az=88.215<-5881 ze=155.13<-1658 Statuses=0009 0009 17:06:09 Msec=0 True Az=88.215 Ze=155.13 Az status=0009 Ze status=0009 17:06:10 Check angles 17:06:10 SkyScan query 17:06:10 SkyScan query done: ret=0 az=70.425<-4695 ze=133.725<-3085 Statuses=0009 0009 17:06:10 Msec=750 True Az=70.425 Ze=133.725 Az status=0009 Ze status=0009 17:06:10 Check angles 17:06:10 SkyScan query 17:06:11 SkyScan query done: ret=0 az=52.74<-3516 ze=112.74<-4484 Statuses=0009 0009 17:06:11 Msec=1500 True Az=52.74 Ze=112.74 Az status=0009 Ze status=0009 17:06:11 Check angles 17:06:11 SkyScan query 17:06:12 SkyScan query done: ret=0 az=41.025<-2735 ze=91.755<-5883 Statuses=0008 0009 17:06:12 Msec=2250 True Az=41.025 Ze=91.755 Az status=0008 Ze status=0009 17:06:12 Check angles 17:06:12 SkyScan query 17:06:12 SkyScan query done: ret=0 az=40.995<-2733 ze=70.83<-7278 Statuses=0008 0009 17:06:12 Msec=3000 True Az=40.995 Ze=70.83 Az status=0008 Ze status=0009 17:06:13 Check angles 17:06:13 SkyScan query 17:06:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.66<-8556 Statuses=0008 0009 17:06:13 Msec=3750 True Az=40.995 Ze=51.66 Az status=0008 Ze status=0009 17:06:13 Check angles 17:06:13 SkyScan query 17:06:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:06:14 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:06:14 Message to Master queued w/err=0: serial=71506 error=0 17:06:19 Received message from Master: op=Filter serial=71507 17:06:19 Color wheel filter change from 0 to 0 17:06:19 FLIGetFilterPos err=0 currentPosition=0 17:06:19 FLIGetStepsRemaining err=0 RemainingSteps=0 17:06:19 Filter is already there-color wheel unchanged 17:06:19 Received message from Master: op=Shutter serial=71508 17:06:19 Shutter LASER close 17:06:19 Received message from Camera: op=State serial=71510 17:06:19 GetSingleValue result=40 Value=cccccccc 17:06:19 SkyScan query 17:06:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:06:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:06:20 Parameters OK 17:06:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:06:20 Set A/D data flow result=40 17:06:20 Set A/D channel type result=40 17:06:20 Set A/D encoding result=40 17:06:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:06:20 Set channel filter=0.000000e+000 result=40 17:06:20 Config A/D Result=40 17:06:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:06:20 Get A/D filter: -9.255963e+061 result=40 17:06:20 Get A/D value=-858993460 result=40 17:06:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:06:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:06:20 Parameters OK 17:06:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:06:20 Set A/D data flow result=40 17:06:20 Set A/D channel type result=40 17:06:20 Set A/D encoding result=40 17:06:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:06:20 Set channel filter=0.000000e+000 result=40 17:06:20 Config A/D Result=40 17:06:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:06:20 Get A/D filter: -9.255963e+061 result=40 17:06:20 Get A/D value=-858993460 result=40 17:06:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:06:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:06:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:06:20 Aux= 17:06:20 Message to Camera, serial 71510 queued 17:06:57 Received message from Master: op=PointingHead serial=71523 17:06:57 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:06:57 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:06:57 Point started: ret=0 17:06:57 point_skyscan result=0 17:06:58 Check angles 17:06:58 SkyScan query 17:06:58 SkyScan query done: ret=0 az=63.975<-4265 ze=66.555<-7563 Statuses=0009 0008 17:06:58 Msec=0 True Az=63.975 Ze=66.555 Az status=0009 Ze status=0008 17:06:59 Check angles 17:06:59 SkyScan query 17:06:59 SkyScan query done: ret=0 az=81.45<-5430 ze=66.51<-7566 Statuses=0009 0008 17:06:59 Msec=750 True Az=81.45 Ze=66.51 Az status=0009 Ze status=0008 17:06:59 Check angles 17:06:59 SkyScan query 17:07:00 SkyScan query done: ret=0 az=98.955<-6597 ze=66.495<-7567 Statuses=0009 0008 17:07:00 Msec=1500 True Az=98.955 Ze=66.495 Az status=0009 Ze status=0008 17:07:00 Check angles 17:07:00 SkyScan query 17:07:01 SkyScan query done: ret=0 az=116.85<-7790 ze=66.495<-7567 Statuses=0009 0008 17:07:01 Msec=2250 True Az=116.85 Ze=66.495 Az status=0009 Ze status=0008 17:07:01 Check angles 17:07:01 SkyScan query 17:07:01 SkyScan query done: ret=0 az=134.34<-8956 ze=66.495<-7567 Statuses=0009 0008 17:07:01 Msec=3000 True Az=134.34 Ze=66.495 Az status=0009 Ze status=0008 17:07:02 Check angles 17:07:02 SkyScan query 17:07:02 SkyScan query done: ret=0 az=151.635<-10109 ze=66.495<-7567 Statuses=0009 0008 17:07:02 Msec=3750 True Az=151.635 Ze=66.495 Az status=0009 Ze status=0008 17:07:02 Check angles 17:07:02 SkyScan query 17:07:03 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 17:07:03 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 17:07:03 Message to Master queued w/err=0: serial=71523 error=0 17:07:08 Received message from Master: op=Filter serial=71524 17:07:08 Color wheel filter change from 0 to 0 17:07:08 FLIGetFilterPos err=0 currentPosition=0 17:07:08 FLIGetStepsRemaining err=0 RemainingSteps=0 17:07:08 Filter is already there-color wheel unchanged 17:07:08 Received message from Master: op=Shutter serial=71525 17:07:08 Shutter LASER close 17:07:08 Received message from Camera: op=State serial=71527 17:07:08 GetSingleValue result=40 Value=cccccccc 17:07:08 SkyScan query 17:07:09 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:07:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:09 Parameters OK 17:07:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:09 Set A/D data flow result=40 17:07:09 Set A/D channel type result=40 17:07:09 Set A/D encoding result=40 17:07:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:09 Set channel filter=0.000000e+000 result=40 17:07:09 Config A/D Result=40 17:07:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:09 Get A/D filter: -9.255963e+061 result=40 17:07:09 Get A/D value=-858993460 result=40 17:07:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:09 Parameters OK 17:07:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:09 Set A/D data flow result=40 17:07:09 Set A/D channel type result=40 17:07:09 Set A/D encoding result=40 17:07:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:09 Set channel filter=0.000000e+000 result=40 17:07:09 Config A/D Result=40 17:07:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:09 Get A/D filter: -9.255963e+061 result=40 17:07:09 Get A/D value=-858993460 result=40 17:07:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:09 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:07:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:07:09 Aux= 17:07:09 Message to Camera, serial 71527 queued 17:07:46 Received message from Master: op=PointingHead serial=71540 17:07:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:07:46 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:07:46 Point started: ret=0 17:07:46 point_skyscan result=0 17:07:47 Check angles 17:07:47 SkyScan query 17:07:47 SkyScan query done: ret=0 az=134.835<-8989 ze=36.615<-9559 Statuses=0009 0009 17:07:47 Msec=0 True Az=134.835 Ze=36.615 Az status=0009 Ze status=0009 17:07:47 Check angles 17:07:47 SkyScan query 17:07:48 SkyScan query done: ret=0 az=117.03<-7802 ze=15.255<-10983 Statuses=0009 0009 17:07:48 Msec=750 True Az=117.03 Ze=15.255 Az status=0009 Ze status=0009 17:07:48 Check angles 17:07:48 SkyScan query 17:07:49 SkyScan query done: ret=0 az=99.27<-6618 ze=-6.165<-12411 Statuses=0009 0009 17:07:49 Msec=1500 True Az=99.27 Ze=-6.165 Az status=0009 Ze status=0009 17:07:49 Check angles 17:07:49 SkyScan query 17:07:50 SkyScan query done: ret=0 az=81.51<-5434 ze=-27.615<-13841 Statuses=0009 0009 17:07:50 Msec=2250 True Az=81.51 Ze=-27.615 Az status=0009 Ze status=0009 17:07:50 Check angles 17:07:50 SkyScan query 17:07:50 SkyScan query done: ret=0 az=64.005<-4267 ze=-38.565<-14571 Statuses=0009 0008 17:07:50 Msec=3000 True Az=64.005 Ze=-38.565 Az status=0009 Ze status=0008 17:07:50 Check angles 17:07:50 SkyScan query 17:07:51 SkyScan query done: ret=0 az=46.53<-3102 ze=-38.52<-14568 Statuses=0009 0008 17:07:51 Msec=3750 True Az=46.53 Ze=-38.52 Az status=0009 Ze status=0008 17:07:51 Check angles 17:07:51 SkyScan query 17:07:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:07:52 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:07:52 Message to Master queued w/err=0: serial=71540 error=0 17:07:57 Received message from Master: op=Filter serial=71541 17:07:57 Color wheel filter change from 0 to 0 17:07:57 FLIGetFilterPos err=0 currentPosition=0 17:07:57 FLIGetStepsRemaining err=0 RemainingSteps=0 17:07:57 Filter is already there-color wheel unchanged 17:07:57 Received message from Master: op=Shutter serial=71542 17:07:57 Shutter LASER close 17:07:57 Received message from Camera: op=State serial=71544 17:07:57 GetSingleValue result=40 Value=cccccccc 17:07:57 SkyScan query 17:07:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:07:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:58 Parameters OK 17:07:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:58 Set A/D data flow result=40 17:07:58 Set A/D channel type result=40 17:07:58 Set A/D encoding result=40 17:07:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:58 Set channel filter=0.000000e+000 result=40 17:07:58 Config A/D Result=40 17:07:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:58 Get A/D filter: -9.255963e+061 result=40 17:07:58 Get A/D value=-858993460 result=40 17:07:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:58 Parameters OK 17:07:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:58 Set A/D data flow result=40 17:07:58 Set A/D channel type result=40 17:07:58 Set A/D encoding result=40 17:07:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:58 Set channel filter=0.000000e+000 result=40 17:07:58 Config A/D Result=40 17:07:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:58 Get A/D filter: -9.255963e+061 result=40 17:07:58 Get A/D value=-858993460 result=40 17:07:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:07:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:07:58 Aux= 17:07:58 Message to Camera, serial 71544 queued 17:08:34 Received message from Master: op=PointingHead serial=71557 17:08:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:08:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:08:35 Point started: ret=0 17:08:35 point_skyscan result=0 17:08:35 Check angles 17:08:35 SkyScan query 17:08:36 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.01<-16534 Statuses=0009 0009 17:08:36 Msec=0 True Az=63.81 Ze=-68.01 Az status=0009 Ze status=0009 17:08:36 Check angles 17:08:36 SkyScan query 17:08:37 SkyScan query done: ret=0 az=81.15<-5410 ze=-89.01<-17934 Statuses=0009 0009 17:08:37 Msec=750 True Az=81.15 Ze=-89.01 Az status=0009 Ze status=0009 17:08:37 Check angles 17:08:37 SkyScan query 17:08:38 SkyScan query done: ret=0 az=98.745<-6583 ze=-109.92<-19328 Statuses=0009 0009 17:08:38 Msec=1500 True Az=98.745 Ze=-109.92 Az status=0009 Ze status=0009 17:08:38 Check angles 17:08:38 SkyScan query 17:08:38 SkyScan query done: ret=0 az=116.355<-7757 ze=-130.89<-20726 Statuses=0009 0009 17:08:38 Msec=2250 True Az=116.355 Ze=-130.89 Az status=0009 Ze status=0009 17:08:38 Check angles 17:08:38 SkyScan query 17:08:39 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 17:08:39 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 17:08:39 Check angles 17:08:39 SkyScan query 17:08:40 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 17:08:40 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 17:08:40 Message to Master queued w/err=0: serial=71557 error=0 17:08:45 Received message from Master: op=Filter serial=71558 17:08:45 Color wheel filter change from 0 to 0 17:08:45 FLIGetFilterPos err=0 currentPosition=0 17:08:45 FLIGetStepsRemaining err=0 RemainingSteps=0 17:08:45 Filter is already there-color wheel unchanged 17:08:45 Received message from Master: op=Shutter serial=71559 17:08:45 Shutter LASER close 17:08:45 Received message from Camera: op=State serial=71561 17:08:45 GetSingleValue result=40 Value=cccccccc 17:08:45 SkyScan query 17:08:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:08:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:08:46 Parameters OK 17:08:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:08:46 Set A/D data flow result=40 17:08:46 Set A/D channel type result=40 17:08:46 Set A/D encoding result=40 17:08:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:08:46 Set channel filter=0.000000e+000 result=40 17:08:46 Config A/D Result=40 17:08:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:08:46 Get A/D filter: -9.255963e+061 result=40 17:08:46 Get A/D value=-858993460 result=40 17:08:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:08:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:08:46 Parameters OK 17:08:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:08:46 Set A/D data flow result=40 17:08:46 Set A/D channel type result=40 17:08:46 Set A/D encoding result=40 17:08:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:08:46 Set channel filter=0.000000e+000 result=40 17:08:46 Config A/D Result=40 17:08:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:08:46 Get A/D filter: -9.255963e+061 result=40 17:08:46 Get A/D value=-858993460 result=40 17:08:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:08:46 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:08:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:08:46 Aux= 17:08:46 Message to Camera, serial 71561 queued 17:09:22 Received message from Master: op=PointingHead serial=71573 17:09:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:09:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:09:22 Point started: ret=0 17:09:22 point_skyscan result=0 17:09:23 Check angles 17:09:23 SkyScan query 17:09:23 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.435<-23429 Statuses=0009 0009 17:09:23 Msec=0 True Az=113.01 Ze=-171.435 Az status=0009 Ze status=0009 17:09:23 Check angles 17:09:23 SkyScan query 17:09:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 17:09:24 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 17:09:24 Message to Master queued w/err=0: serial=71573 error=0 17:09:29 Received message from Master: op=Filter serial=71574 17:09:29 Color wheel filter change from 0 to 0 17:09:29 FLIGetFilterPos err=0 currentPosition=0 17:09:29 FLIGetStepsRemaining err=0 RemainingSteps=0 17:09:29 Filter is already there-color wheel unchanged 17:09:29 Received message from Master: op=Shutter serial=71575 17:09:29 Shutter LASER open 17:09:29 Received message from Camera: op=State serial=71577 17:09:29 GetSingleValue result=40 Value=cccccccc 17:09:29 SkyScan query 17:09:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:09:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:09:30 Parameters OK 17:09:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:09:30 Set A/D data flow result=40 17:09:30 Set A/D channel type result=40 17:09:30 Set A/D encoding result=40 17:09:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:09:30 Set channel filter=0.000000e+000 result=40 17:09:30 Config A/D Result=40 17:09:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:09:30 Get A/D filter: -9.255963e+061 result=40 17:09:30 Get A/D value=-858993460 result=40 17:09:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:09:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:09:30 Parameters OK 17:09:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:09:30 Set A/D data flow result=40 17:09:30 Set A/D channel type result=40 17:09:30 Set A/D encoding result=40 17:09:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:09:30 Set channel filter=0.000000e+000 result=40 17:09:30 Config A/D Result=40 17:09:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:09:30 Get A/D filter: -9.255963e+061 result=40 17:09:30 Get A/D value=-858993460 result=40 17:09:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:09:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:09:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:09:30 Aux= 17:09:30 Message to Camera, serial 71577 queued 17:09:38 Received message from Master: op=Shutter serial=71587 17:09:38 Shutter LASER close 17:09:39 Received message from Master: op=PointingHead serial=71591 17:09:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:09:39 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:09:39 Point started: ret=0 17:09:39 point_skyscan result=0 17:09:40 Check angles 17:09:40 SkyScan query 17:09:41 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.1<-21540 Statuses=0009 0009 17:09:41 Msec=0 True Az=135.96 Ze=-143.1 Az status=0009 Ze status=0009 17:09:41 Check angles 17:09:41 SkyScan query 17:09:41 SkyScan query done: ret=0 az=153.825<-10255 ze=-121.785<-20119 Statuses=0009 0009 17:09:41 Msec=750 True Az=153.825 Ze=-121.785 Az status=0009 Ze status=0009 17:09:42 Check angles 17:09:42 SkyScan query 17:09:42 SkyScan query done: ret=0 az=171.285<-11419 ze=-100.83<-18722 Statuses=0009 0009 17:09:42 Msec=1500 True Az=171.285 Ze=-100.83 Az status=0009 Ze status=0009 17:09:42 Check angles 17:09:42 SkyScan query 17:09:43 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.92<-17328 Statuses=0008 0009 17:09:43 Msec=2250 True Az=176.025 Ze=-79.92 Az status=0008 Ze status=0009 17:09:43 Check angles 17:09:43 SkyScan query 17:09:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.47<-15898 Statuses=0008 0009 17:09:44 Msec=3000 True Az=175.995 Ze=-58.47 Az status=0008 Ze status=0009 17:09:44 Check angles 17:09:44 SkyScan query 17:09:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 17:09:44 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 17:09:44 Message to Master queued w/err=0: serial=71591 error=0 17:09:49 Received message from Master: op=Filter serial=71592 17:09:49 Color wheel filter change from 0 to 0 17:09:49 FLIGetFilterPos err=0 currentPosition=0 17:09:49 FLIGetStepsRemaining err=0 RemainingSteps=0 17:09:49 Filter is already there-color wheel unchanged 17:09:50 Received message from Master: op=Shutter serial=71593 17:09:50 Shutter LASER close 17:09:50 Received message from Camera: op=State serial=71595 17:09:50 GetSingleValue result=40 Value=cccccccc 17:09:50 SkyScan query 17:09:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:09:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:09:50 Parameters OK 17:09:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:09:50 Set A/D data flow result=40 17:09:50 Set A/D channel type result=40 17:09:50 Set A/D encoding result=40 17:09:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:09:50 Set channel filter=0.000000e+000 result=40 17:09:50 Config A/D Result=40 17:09:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:09:50 Get A/D filter: -9.255963e+061 result=40 17:09:50 Get A/D value=-858993460 result=40 17:09:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:09:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:09:50 Parameters OK 17:09:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:09:50 Set A/D data flow result=40 17:09:50 Set A/D channel type result=40 17:09:50 Set A/D encoding result=40 17:09:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:09:50 Set channel filter=0.000000e+000 result=40 17:09:50 Config A/D Result=40 17:09:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:09:50 Get A/D filter: -9.255963e+061 result=40 17:09:50 Get A/D value=-858993460 result=40 17:09:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:09:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:09:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:09:50 Aux= 17:09:50 Message to Camera, serial 71595 queued 17:10:27 Received message from Master: op=PointingHead serial=71608 17:10:27 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:10:27 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:10:28 Point started: ret=0 17:10:28 point_skyscan result=0 17:10:28 Check angles 17:10:28 SkyScan query 17:10:29 SkyScan query done: ret=0 az=153<-10200 ze=-21.96<-13464 Statuses=0009 0009 17:10:29 Msec=0 True Az=153 Ze=-21.96 Az status=0009 Ze status=0009 17:10:29 Check angles 17:10:29 SkyScan query 17:10:30 SkyScan query done: ret=0 az=135.3<-9020 ze=-0.54<-12036 Statuses=0009 0009 17:10:30 Msec=750 True Az=135.3 Ze=-0.54 Az status=0009 Ze status=0009 17:10:30 Check angles 17:10:30 SkyScan query 17:10:30 SkyScan query done: ret=0 az=117.615<-7841 ze=20.4<-10640 Statuses=0009 0009 17:10:30 Msec=1500 True Az=117.615 Ze=20.4 Az status=0009 Ze status=0009 17:10:31 Check angles 17:10:31 SkyScan query 17:10:31 SkyScan query done: ret=0 az=100.215<-6681 ze=41.385<-9241 Statuses=0009 0009 17:10:31 Msec=2250 True Az=100.215 Ze=41.385 Az status=0009 Ze status=0009 17:10:31 Check angles 17:10:31 SkyScan query 17:10:32 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 17:10:32 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 17:10:32 Check angles 17:10:32 SkyScan query 17:10:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:10:33 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:10:33 Message to Master queued w/err=0: serial=71608 error=0 17:10:38 Received message from Master: op=Filter serial=71609 17:10:38 Color wheel filter change from 0 to 0 17:10:38 FLIGetFilterPos err=0 currentPosition=0 17:10:38 FLIGetStepsRemaining err=0 RemainingSteps=0 17:10:38 Filter is already there-color wheel unchanged 17:10:38 Received message from Master: op=Shutter serial=71610 17:10:38 Shutter LASER close 17:10:38 Received message from Camera: op=State serial=71612 17:10:38 GetSingleValue result=40 Value=cccccccc 17:10:38 SkyScan query 17:10:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:10:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:10:38 Parameters OK 17:10:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:10:38 Set A/D data flow result=40 17:10:38 Set A/D channel type result=40 17:10:38 Set A/D encoding result=40 17:10:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:10:38 Set channel filter=0.000000e+000 result=40 17:10:38 Config A/D Result=40 17:10:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:10:38 Get A/D filter: -9.255963e+061 result=40 17:10:38 Get A/D value=-858993460 result=40 17:10:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:10:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:10:38 Parameters OK 17:10:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:10:38 Set A/D data flow result=40 17:10:38 Set A/D channel type result=40 17:10:38 Set A/D encoding result=40 17:10:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:10:38 Set channel filter=0.000000e+000 result=40 17:10:38 Config A/D Result=40 17:10:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:10:38 Get A/D filter: -9.255963e+061 result=40 17:10:38 Get A/D value=-858993460 result=40 17:10:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:10:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:10:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:10:38 Aux= 17:10:38 Message to Camera, serial 71612 queued 17:11:15 Received message from Master: op=PointingHead serial=71625 17:11:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:11:15 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:11:16 Point started: ret=0 17:11:16 point_skyscan result=0 17:11:16 Check angles 17:11:16 SkyScan query 17:11:17 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 17:11:17 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 17:11:17 Check angles 17:11:17 SkyScan query 17:11:18 SkyScan query done: ret=0 az=127.035<-8469 ze=38.505<-9433 Statuses=0009 0008 17:11:18 Msec=750 True Az=127.035 Ze=38.505 Az status=0009 Ze status=0008 17:11:18 Check angles 17:11:18 SkyScan query 17:11:18 SkyScan query done: ret=0 az=144.465<-9631 ze=38.505<-9433 Statuses=0009 0008 17:11:18 Msec=1500 True Az=144.465 Ze=38.505 Az status=0009 Ze status=0008 17:11:19 Check angles 17:11:19 SkyScan query 17:11:19 SkyScan query done: ret=0 az=162.015<-10801 ze=38.505<-9433 Statuses=0009 0008 17:11:19 Msec=2250 True Az=162.015 Ze=38.505 Az status=0009 Ze status=0008 17:11:19 Check angles 17:11:19 SkyScan query 17:11:20 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:11:20 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:11:20 Check angles 17:11:20 SkyScan query 17:11:21 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 17:11:21 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 17:11:21 Message to Master queued w/err=0: serial=71625 error=0 17:11:26 Received message from Master: op=Filter serial=71626 17:11:26 Color wheel filter change from 0 to 0 17:11:26 FLIGetFilterPos err=0 currentPosition=0 17:11:26 FLIGetStepsRemaining err=0 RemainingSteps=0 17:11:26 Filter is already there-color wheel unchanged 17:11:26 Received message from Master: op=Shutter serial=71627 17:11:26 Shutter LASER close 17:11:26 Received message from Camera: op=State serial=71629 17:11:26 GetSingleValue result=40 Value=cccccccc 17:11:26 SkyScan query 17:11:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:11:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:11:27 Parameters OK 17:11:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:11:27 Set A/D data flow result=40 17:11:27 Set A/D channel type result=40 17:11:27 Set A/D encoding result=40 17:11:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:11:27 Set channel filter=0.000000e+000 result=40 17:11:27 Config A/D Result=40 17:11:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:11:27 Get A/D filter: -9.255963e+061 result=40 17:11:27 Get A/D value=-858993460 result=40 17:11:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:11:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:11:27 Parameters OK 17:11:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:11:27 Set A/D data flow result=40 17:11:27 Set A/D channel type result=40 17:11:27 Set A/D encoding result=40 17:11:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:11:27 Set channel filter=0.000000e+000 result=40 17:11:27 Config A/D Result=40 17:11:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:11:27 Get A/D filter: -9.255963e+061 result=40 17:11:27 Get A/D value=-858993460 result=40 17:11:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:11:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:11:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:11:27 Aux= 17:11:27 Message to Camera, serial 71629 queued 17:12:03 Received message from Master: op=PointingHead serial=71642 17:12:03 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:12:03 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:12:04 Point started: ret=0 17:12:04 point_skyscan result=0 17:12:04 Check angles 17:12:04 SkyScan query 17:12:05 SkyScan query done: ret=0 az=152.985<-10199 ze=8.61<-11426 Statuses=0009 0009 17:12:05 Msec=0 True Az=152.985 Ze=8.61 Az status=0009 Ze status=0009 17:12:05 Check angles 17:12:05 SkyScan query 17:12:06 SkyScan query done: ret=0 az=135.15<-9010 ze=-12.735<-12849 Statuses=0009 0009 17:12:06 Msec=750 True Az=135.15 Ze=-12.735 Az status=0009 Ze status=0009 17:12:06 Check angles 17:12:06 SkyScan query 17:12:07 SkyScan query done: ret=0 az=117.525<-7835 ze=-33.69<-14246 Statuses=0009 0009 17:12:07 Msec=1500 True Az=117.525 Ze=-33.69 Az status=0009 Ze status=0009 17:12:07 Check angles 17:12:07 SkyScan query 17:12:07 SkyScan query done: ret=0 az=100.2<-6680 ze=-51.555<-15437 Statuses=0009 0009 17:12:07 Msec=2250 True Az=100.2 Ze=-51.555 Az status=0009 Ze status=0009 17:12:07 Check angles 17:12:07 SkyScan query 17:12:08 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.525<-15435 Statuses=0009 0008 17:12:08 Msec=3000 True Az=86.025 Ze=-51.525 Az status=0009 Ze status=0008 17:12:08 Check angles 17:12:08 SkyScan query 17:12:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:12:09 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:12:09 Message to Master queued w/err=0: serial=71642 error=0 17:12:14 Received message from Master: op=Filter serial=71643 17:12:14 Color wheel filter change from 0 to 0 17:12:14 FLIGetFilterPos err=0 currentPosition=0 17:12:14 FLIGetStepsRemaining err=0 RemainingSteps=0 17:12:14 Filter is already there-color wheel unchanged 17:12:14 Received message from Master: op=Shutter serial=71644 17:12:14 Shutter LASER close 17:12:14 Received message from Camera: op=State serial=71646 17:12:14 GetSingleValue result=40 Value=cccccccc 17:12:14 SkyScan query 17:12:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:12:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:12:15 Parameters OK 17:12:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:12:15 Set A/D data flow result=40 17:12:15 Set A/D channel type result=40 17:12:15 Set A/D encoding result=40 17:12:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:12:15 Set channel filter=0.000000e+000 result=40 17:12:15 Config A/D Result=40 17:12:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:12:15 Get A/D filter: -9.255963e+061 result=40 17:12:15 Get A/D value=-858993460 result=40 17:12:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:12:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:12:15 Parameters OK 17:12:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:12:15 Set A/D data flow result=40 17:12:15 Set A/D channel type result=40 17:12:15 Set A/D encoding result=40 17:12:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:12:15 Set channel filter=0.000000e+000 result=40 17:12:15 Config A/D Result=40 17:12:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:12:15 Get A/D filter: -9.255963e+061 result=40 17:12:15 Get A/D value=-858993460 result=40 17:12:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:12:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:12:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:12:15 Aux= 17:12:15 Message to Camera, serial 71646 queued 17:12:51 Received message from Master: op=PointingHead serial=71659 17:12:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:12:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:12:52 Point started: ret=0 17:12:52 point_skyscan result=0 17:12:53 Check angles 17:12:53 SkyScan query 17:12:53 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.435<-17429 Statuses=0009 0009 17:12:53 Msec=0 True Az=109.185 Ze=-81.435 Az status=0009 Ze status=0009 17:12:53 Check angles 17:12:53 SkyScan query 17:12:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.855<-18857 Statuses=0008 0009 17:12:54 Msec=750 True Az=112.995 Ze=-102.855 Az status=0008 Ze status=0009 17:12:54 Check angles 17:12:54 SkyScan query 17:12:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.87<-20258 Statuses=0008 0009 17:12:55 Msec=1500 True Az=112.995 Ze=-123.87 Az status=0008 Ze status=0009 17:12:55 Check angles 17:12:55 SkyScan query 17:12:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.185<-21679 Statuses=0008 0009 17:12:55 Msec=2250 True Az=112.995 Ze=-145.185 Az status=0008 Ze status=0009 17:12:56 Check angles 17:12:56 SkyScan query 17:12:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.575<-23105 Statuses=0008 0009 17:12:56 Msec=3000 True Az=112.995 Ze=-166.575 Az status=0008 Ze status=0009 17:12:56 Check angles 17:12:56 SkyScan query 17:12:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:12:57 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:12:57 Message to Master queued w/err=0: serial=71659 error=0 17:13:02 Received message from Master: op=Filter serial=71660 17:13:02 Color wheel filter change from 0 to 0 17:13:02 FLIGetFilterPos err=0 currentPosition=0 17:13:02 FLIGetStepsRemaining err=0 RemainingSteps=0 17:13:02 Filter is already there-color wheel unchanged 17:13:02 Received message from Master: op=Shutter serial=71661 17:13:02 Shutter LASER open 17:13:02 Received message from Camera: op=State serial=71663 17:13:02 GetSingleValue result=40 Value=cccccccc 17:13:02 SkyScan query 17:13:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:13:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:13:03 Parameters OK 17:13:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:13:03 Set A/D data flow result=40 17:13:03 Set A/D channel type result=40 17:13:03 Set A/D encoding result=40 17:13:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:13:03 Set channel filter=0.000000e+000 result=40 17:13:03 Config A/D Result=40 17:13:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:13:03 Get A/D filter: -9.255963e+061 result=40 17:13:03 Get A/D value=-858993460 result=40 17:13:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:13:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:13:03 Parameters OK 17:13:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:13:03 Set A/D data flow result=40 17:13:03 Set A/D channel type result=40 17:13:03 Set A/D encoding result=40 17:13:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:13:03 Set channel filter=0.000000e+000 result=40 17:13:03 Config A/D Result=40 17:13:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:13:03 Get A/D filter: -9.255963e+061 result=40 17:13:03 Get A/D value=-858993460 result=40 17:13:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:13:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:13:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:13:03 Aux= 17:13:03 Message to Camera, serial 71663 queued 17:13:11 Received message from Master: op=Shutter serial=71673 17:13:11 Shutter LASER close 17:13:12 Received message from Master: op=PointingHead serial=71677 17:13:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:13:12 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:13:12 Point started: ret=0 17:13:12 point_skyscan result=0 17:13:13 Check angles 17:13:13 SkyScan query 17:13:13 SkyScan query done: ret=0 az=89.895<-5993 ze=157.35<-1510 Statuses=0009 0009 17:13:13 Msec=0 True Az=89.895 Ze=157.35 Az status=0009 Ze status=0009 17:13:14 Check angles 17:13:14 SkyScan query 17:13:14 SkyScan query done: ret=0 az=72.465<-4831 ze=136.335<-2911 Statuses=0009 0009 17:13:14 Msec=750 True Az=72.465 Ze=136.335 Az status=0009 Ze status=0009 17:13:14 Check angles 17:13:14 SkyScan query 17:13:15 SkyScan query done: ret=0 az=55.095<-3673 ze=115.455<-4303 Statuses=0009 0009 17:13:15 Msec=1500 True Az=55.095 Ze=115.455 Az status=0009 Ze status=0009 17:13:15 Check angles 17:13:15 SkyScan query 17:13:16 SkyScan query done: ret=0 az=40.86<-2724 ze=94.455<-5703 Statuses=0009 0009 17:13:16 Msec=2250 True Az=40.86 Ze=94.455 Az status=0009 Ze status=0009 17:13:16 Check angles 17:13:16 SkyScan query 17:13:16 SkyScan query done: ret=0 az=40.995<-2733 ze=73.53<-7098 Statuses=0008 0009 17:13:16 Msec=3000 True Az=40.995 Ze=73.53 Az status=0008 Ze status=0009 17:13:17 Check angles 17:13:17 SkyScan query 17:13:17 SkyScan query done: ret=0 az=40.995<-2733 ze=52.905<-8473 Statuses=0008 0009 17:13:17 Msec=3750 True Az=40.995 Ze=52.905 Az status=0008 Ze status=0009 17:13:17 Check angles 17:13:17 SkyScan query 17:13:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:13:18 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:13:18 Message to Master queued w/err=0: serial=71677 error=0 17:13:23 Received message from Master: op=Filter serial=71678 17:13:23 Color wheel filter change from 0 to 0 17:13:23 FLIGetFilterPos err=0 currentPosition=0 17:13:23 FLIGetStepsRemaining err=0 RemainingSteps=0 17:13:23 Filter is already there-color wheel unchanged 17:13:23 Received message from Master: op=Shutter serial=71679 17:13:23 Shutter LASER close 17:13:23 Received message from Camera: op=State serial=71681 17:13:23 GetSingleValue result=40 Value=cccccccc 17:13:23 SkyScan query 17:13:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:13:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:13:24 Parameters OK 17:13:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:13:24 Set A/D data flow result=40 17:13:24 Set A/D channel type result=40 17:13:24 Set A/D encoding result=40 17:13:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:13:24 Set channel filter=0.000000e+000 result=40 17:13:24 Config A/D Result=40 17:13:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:13:24 Get A/D filter: -9.255963e+061 result=40 17:13:24 Get A/D value=-858993460 result=40 17:13:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:13:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:13:24 Parameters OK 17:13:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:13:24 Set A/D data flow result=40 17:13:24 Set A/D channel type result=40 17:13:24 Set A/D encoding result=40 17:13:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:13:24 Set channel filter=0.000000e+000 result=40 17:13:24 Config A/D Result=40 17:13:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:13:24 Get A/D filter: -9.255963e+061 result=40 17:13:24 Get A/D value=-858993460 result=40 17:13:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:13:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:13:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:13:24 Aux= 17:13:24 Message to Camera, serial 71681 queued 17:14:01 Received message from Master: op=PointingHead serial=71694 17:14:01 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:14:01 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:14:01 Point started: ret=0 17:14:01 point_skyscan result=0 17:14:02 Check angles 17:14:02 SkyScan query 17:14:02 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 17:14:02 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 17:14:03 Check angles 17:14:03 SkyScan query 17:14:03 SkyScan query done: ret=0 az=81.39<-5426 ze=66.495<-7567 Statuses=0009 0008 17:14:03 Msec=750 True Az=81.39 Ze=66.495 Az status=0009 Ze status=0008 17:14:03 Check angles 17:14:03 SkyScan query 17:14:04 SkyScan query done: ret=0 az=99.42<-6628 ze=66.495<-7567 Statuses=0009 0008 17:14:04 Msec=1500 True Az=99.42 Ze=66.495 Az status=0009 Ze status=0008 17:14:04 Check angles 17:14:04 SkyScan query 17:14:05 SkyScan query done: ret=0 az=116.655<-7777 ze=66.495<-7567 Statuses=0009 0008 17:14:05 Msec=2250 True Az=116.655 Ze=66.495 Az status=0009 Ze status=0008 17:14:05 Check angles 17:14:05 SkyScan query 17:14:05 SkyScan query done: ret=0 az=134.235<-8949 ze=66.495<-7567 Statuses=0009 0008 17:14:05 Msec=3000 True Az=134.235 Ze=66.495 Az status=0009 Ze status=0008 17:14:06 Check angles 17:14:06 SkyScan query 17:14:06 SkyScan query done: ret=0 az=152.01<-10134 ze=66.495<-7567 Statuses=0009 0008 17:14:06 Msec=3750 True Az=152.01 Ze=66.495 Az status=0009 Ze status=0008 17:14:06 Check angles 17:14:06 SkyScan query 17:14:07 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 17:14:07 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 17:14:07 Message to Master queued w/err=0: serial=71694 error=0 17:14:12 Received message from Master: op=Filter serial=71695 17:14:12 Color wheel filter change from 0 to 0 17:14:12 FLIGetFilterPos err=0 currentPosition=0 17:14:12 FLIGetStepsRemaining err=0 RemainingSteps=0 17:14:12 Filter is already there-color wheel unchanged 17:14:12 Received message from Master: op=Shutter serial=71696 17:14:12 Shutter LASER close 17:14:12 Received message from Camera: op=State serial=71698 17:14:12 GetSingleValue result=40 Value=cccccccc 17:14:12 SkyScan query 17:14:13 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:14:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:14:13 Parameters OK 17:14:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:14:13 Set A/D data flow result=40 17:14:13 Set A/D channel type result=40 17:14:13 Set A/D encoding result=40 17:14:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:14:13 Set channel filter=0.000000e+000 result=40 17:14:13 Config A/D Result=40 17:14:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:14:13 Get A/D filter: -9.255963e+061 result=40 17:14:13 Get A/D value=-858993460 result=40 17:14:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:14:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:14:13 Parameters OK 17:14:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:14:13 Set A/D data flow result=40 17:14:13 Set A/D channel type result=40 17:14:13 Set A/D encoding result=40 17:14:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:14:13 Set channel filter=0.000000e+000 result=40 17:14:13 Config A/D Result=40 17:14:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:14:13 Get A/D filter: -9.255963e+061 result=40 17:14:13 Get A/D value=-858993460 result=40 17:14:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:14:13 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:14:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:14:13 Aux= 17:14:13 Message to Camera, serial 71698 queued 17:14:50 Received message from Master: op=PointingHead serial=71711 17:14:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:14:50 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:14:50 Point started: ret=0 17:14:50 point_skyscan result=0 17:14:51 Check angles 17:14:51 SkyScan query 17:14:51 SkyScan query done: ret=0 az=135<-9000 ze=36.765<-9549 Statuses=0009 0009 17:14:51 Msec=0 True Az=135 Ze=36.765 Az status=0009 Ze status=0009 17:14:51 Check angles 17:14:51 SkyScan query 17:14:52 SkyScan query done: ret=0 az=117.525<-7835 ze=15.84<-10944 Statuses=0009 0009 17:14:52 Msec=750 True Az=117.525 Ze=15.84 Az status=0009 Ze status=0009 17:14:52 Check angles 17:14:52 SkyScan query 17:14:53 SkyScan query done: ret=0 az=100.17<-6678 ze=-5.145<-12343 Statuses=0009 0009 17:14:53 Msec=1500 True Az=100.17 Ze=-5.145 Az status=0009 Ze status=0009 17:14:53 Check angles 17:14:53 SkyScan query 17:14:53 SkyScan query done: ret=0 az=82.695<-5513 ze=-26.07<-13738 Statuses=0009 0009 17:14:53 Msec=2250 True Az=82.695 Ze=-26.07 Az status=0009 Ze status=0009 17:14:54 Check angles 17:14:54 SkyScan query 17:14:54 SkyScan query done: ret=0 az=65.175<-4345 ze=-38.565<-14571 Statuses=0009 0008 17:14:54 Msec=3000 True Az=65.175 Ze=-38.565 Az status=0009 Ze status=0008 17:14:54 Check angles 17:14:54 SkyScan query 17:14:55 SkyScan query done: ret=0 az=47.715<-3181 ze=-38.535<-14569 Statuses=0009 0008 17:14:55 Msec=3750 True Az=47.715 Ze=-38.535 Az status=0009 Ze status=0008 17:14:55 Check angles 17:14:55 SkyScan query 17:14:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:14:56 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:14:56 Message to Master queued w/err=0: serial=71711 error=0 17:15:01 Received message from Master: op=Filter serial=71712 17:15:01 Color wheel filter change from 0 to 0 17:15:01 FLIGetFilterPos err=0 currentPosition=0 17:15:01 FLIGetStepsRemaining err=0 RemainingSteps=0 17:15:01 Filter is already there-color wheel unchanged 17:15:01 Received message from Master: op=Shutter serial=71713 17:15:01 Shutter LASER close 17:15:01 Received message from Camera: op=State serial=71715 17:15:01 GetSingleValue result=40 Value=cccccccc 17:15:01 SkyScan query 17:15:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:15:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:15:02 Parameters OK 17:15:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:15:02 Set A/D data flow result=40 17:15:02 Set A/D channel type result=40 17:15:02 Set A/D encoding result=40 17:15:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:15:02 Set channel filter=0.000000e+000 result=40 17:15:02 Config A/D Result=40 17:15:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:15:02 Get A/D filter: -9.255963e+061 result=40 17:15:02 Get A/D value=-858993460 result=40 17:15:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:15:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:15:02 Parameters OK 17:15:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:15:02 Set A/D data flow result=40 17:15:02 Set A/D channel type result=40 17:15:02 Set A/D encoding result=40 17:15:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:15:02 Set channel filter=0.000000e+000 result=40 17:15:02 Config A/D Result=40 17:15:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:15:02 Get A/D filter: -9.255963e+061 result=40 17:15:02 Get A/D value=-858993460 result=40 17:15:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:15:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:15:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:15:02 Aux= 17:15:02 Message to Camera, serial 71715 queued 17:15:29 Received message from Master: op=Identify serial=71716 17:15:38 Received message from Master: op=PointingHead serial=71731 17:15:38 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:15:38 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:15:39 Point started: ret=0 17:15:39 point_skyscan result=0 17:15:39 Check angles 17:15:39 SkyScan query 17:15:40 SkyScan query done: ret=0 az=64.305<-4287 ze=-68.595<-16573 Statuses=0009 0009 17:15:40 Msec=0 True Az=64.305 Ze=-68.595 Az status=0009 Ze status=0009 17:15:40 Check angles 17:15:40 SkyScan query 17:15:41 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.58<-17972 Statuses=0009 0009 17:15:41 Msec=750 True Az=81.585 Ze=-89.58 Az status=0009 Ze status=0009 17:15:41 Check angles 17:15:41 SkyScan query 17:15:42 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.535<-19369 Statuses=0009 0009 17:15:42 Msec=1500 True Az=99.195 Ze=-110.535 Az status=0009 Ze status=0009 17:15:42 Check angles 17:15:42 SkyScan query 17:15:42 SkyScan query done: ret=0 az=116.805<-7787 ze=-131.475<-20765 Statuses=0009 0009 17:15:42 Msec=2250 True Az=116.805 Ze=-131.475 Az status=0009 Ze status=0009 17:15:42 Check angles 17:15:42 SkyScan query 17:15:43 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 17:15:43 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 17:15:43 Check angles 17:15:43 SkyScan query 17:15:44 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 17:15:44 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 17:15:44 Message to Master queued w/err=0: serial=71731 error=0 17:15:49 Received message from Master: op=Filter serial=71732 17:15:49 Color wheel filter change from 0 to 0 17:15:49 FLIGetFilterPos err=0 currentPosition=0 17:15:49 FLIGetStepsRemaining err=0 RemainingSteps=0 17:15:49 Filter is already there-color wheel unchanged 17:15:49 Received message from Master: op=Shutter serial=71733 17:15:49 Shutter LASER close 17:15:49 Received message from Camera: op=State serial=71735 17:15:49 GetSingleValue result=40 Value=cccccccc 17:15:49 SkyScan query 17:15:50 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:15:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:15:50 Parameters OK 17:15:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:15:50 Set A/D data flow result=40 17:15:50 Set A/D channel type result=40 17:15:50 Set A/D encoding result=40 17:15:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:15:50 Set channel filter=0.000000e+000 result=40 17:15:50 Config A/D Result=40 17:15:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:15:50 Get A/D filter: -9.255963e+061 result=40 17:15:50 Get A/D value=-858993460 result=40 17:15:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:15:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:15:50 Parameters OK 17:15:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:15:50 Set A/D data flow result=40 17:15:50 Set A/D channel type result=40 17:15:50 Set A/D encoding result=40 17:15:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:15:50 Set channel filter=0.000000e+000 result=40 17:15:50 Config A/D Result=40 17:15:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:15:50 Get A/D filter: -9.255963e+061 result=40 17:15:50 Get A/D value=-858993460 result=40 [UTC 2018-12-11 17:15:50] 17:15:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:15:50 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:15:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:15:50 Aux= 17:15:50 Message to Camera, serial 71735 queued [UTC 2018-12-11 17:15:54] 17:16:26 Received message from Master: op=PointingHead serial=71748 17:16:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:16:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:16:27 Point started: ret=0 17:16:27 point_skyscan result=0 17:16:27 Check angles 17:16:27 SkyScan query 17:16:28 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.925<-23395 Statuses=0009 0009 17:16:28 Msec=0 True Az=113.01 Ze=-170.925 Az status=0009 Ze status=0009 17:16:28 Check angles 17:16:28 SkyScan query 17:16:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 17:16:29 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 17:16:29 Message to Master queued w/err=0: serial=71748 error=0 17:16:34 Received message from Master: op=Filter serial=71749 17:16:34 Color wheel filter change from 0 to 0 17:16:34 FLIGetFilterPos err=0 currentPosition=0 17:16:34 FLIGetStepsRemaining err=0 RemainingSteps=0 17:16:34 Filter is already there-color wheel unchanged 17:16:34 Received message from Master: op=Shutter serial=71750 17:16:34 Shutter LASER open 17:16:34 Received message from Camera: op=State serial=71752 17:16:34 GetSingleValue result=40 Value=cccccccc 17:16:34 SkyScan query 17:16:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:16:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:16:35 Parameters OK 17:16:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:16:35 Set A/D data flow result=40 17:16:35 Set A/D channel type result=40 17:16:35 Set A/D encoding result=40 17:16:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:16:35 Set channel filter=0.000000e+000 result=40 17:16:35 Config A/D Result=40 17:16:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:16:35 Get A/D filter: -9.255963e+061 result=40 17:16:35 Get A/D value=-858993460 result=40 17:16:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:16:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:16:35 Parameters OK 17:16:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:16:35 Set A/D data flow result=40 17:16:35 Set A/D channel type result=40 17:16:35 Set A/D encoding result=40 17:16:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:16:35 Set channel filter=0.000000e+000 result=40 17:16:35 Config A/D Result=40 17:16:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:16:35 Get A/D filter: -9.255963e+061 result=40 17:16:35 Get A/D value=-858993460 result=40 17:16:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:16:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:16:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:16:35 Aux= 17:16:35 Message to Camera, serial 71752 queued 17:16:43 Received message from Master: op=Shutter serial=71762 17:16:43 Shutter LASER close 17:16:44 Received message from Master: op=PointingHead serial=71766 17:16:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:16:44 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:16:44 Point started: ret=0 17:16:44 point_skyscan result=0 17:16:45 Check angles 17:16:45 SkyScan query 17:16:45 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.34<-21556 Statuses=0009 0009 17:16:45 Msec=0 True Az=135.825 Ze=-143.34 Az status=0009 Ze status=0009 17:16:46 Check angles 17:16:46 SkyScan query 17:16:46 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.4<-20160 Statuses=0009 0009 17:16:46 Msec=750 True Az=153.36 Ze=-122.4 Az status=0009 Ze status=0009 17:16:46 Check angles 17:16:46 SkyScan query 17:16:47 SkyScan query done: ret=0 az=171.195<-11413 ze=-100.995<-18733 Statuses=0009 0009 17:16:47 Msec=1500 True Az=171.195 Ze=-100.995 Az status=0009 Ze status=0009 17:16:47 Check angles 17:16:47 SkyScan query 17:16:48 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.055<-17337 Statuses=0008 0009 17:16:48 Msec=2250 True Az=176.025 Ze=-80.055 Az status=0008 Ze status=0009 17:16:48 Check angles 17:16:48 SkyScan query 17:16:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.605<-15907 Statuses=0008 0009 17:16:49 Msec=3000 True Az=176.01 Ze=-58.605 Az status=0008 Ze status=0009 17:16:49 Check angles 17:16:49 SkyScan query 17:16:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 17:16:49 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 17:16:49 Message to Master queued w/err=0: serial=71766 error=0 17:16:54 Received message from Master: op=Filter serial=71767 17:16:54 Color wheel filter change from 0 to 0 17:16:54 FLIGetFilterPos err=0 currentPosition=0 17:16:54 FLIGetStepsRemaining err=0 RemainingSteps=0 17:16:54 Filter is already there-color wheel unchanged 17:16:54 Received message from Master: op=Shutter serial=71768 17:16:54 Shutter LASER close 17:16:55 Received message from Camera: op=State serial=71770 17:16:55 GetSingleValue result=40 Value=cccccccc 17:16:55 SkyScan query 17:16:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:16:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:16:55 Parameters OK 17:16:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:16:55 Set A/D data flow result=40 17:16:55 Set A/D channel type result=40 17:16:55 Set A/D encoding result=40 17:16:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:16:55 Set channel filter=0.000000e+000 result=40 17:16:55 Config A/D Result=40 17:16:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:16:55 Get A/D filter: -9.255963e+061 result=40 17:16:55 Get A/D value=-858993460 result=40 17:16:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:16:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:16:55 Parameters OK 17:16:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:16:55 Set A/D data flow result=40 17:16:55 Set A/D channel type result=40 17:16:55 Set A/D encoding result=40 17:16:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:16:55 Set channel filter=0.000000e+000 result=40 17:16:55 Config A/D Result=40 17:16:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:16:55 Get A/D filter: -9.255963e+061 result=40 17:16:55 Get A/D value=-858993460 result=40 17:16:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:16:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:16:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:16:55 Aux= 17:16:55 Message to Camera, serial 71770 queued 17:17:32 Received message from Master: op=PointingHead serial=71783 17:17:32 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:17:32 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:17:32 Point started: ret=0 17:17:32 point_skyscan result=0 17:17:33 Check angles 17:17:33 SkyScan query 17:17:34 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.99<-13466 Statuses=0009 0009 17:17:34 Msec=0 True Az=153.18 Ze=-21.99 Az status=0009 Ze status=0009 17:17:34 Check angles 17:17:34 SkyScan query 17:17:34 SkyScan query done: ret=0 az=135.795<-9053 ze=-1.02<-12068 Statuses=0009 0009 17:17:34 Msec=750 True Az=135.795 Ze=-1.02 Az status=0009 Ze status=0009 17:17:35 Check angles 17:17:35 SkyScan query 17:17:35 SkyScan query done: ret=0 az=118.17<-7878 ze=19.95<-10670 Statuses=0009 0009 17:17:35 Msec=1500 True Az=118.17 Ze=19.95 Az status=0009 Ze status=0009 17:17:35 Check angles 17:17:35 SkyScan query 17:17:36 SkyScan query done: ret=0 az=100.65<-6710 ze=40.92<-9272 Statuses=0009 0009 17:17:36 Msec=2250 True Az=100.65 Ze=40.92 Az status=0009 Ze status=0009 17:17:36 Check angles 17:17:36 SkyScan query 17:17:37 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 17:17:37 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 17:17:37 Check angles 17:17:37 SkyScan query 17:17:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:17:37 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:17:37 Message to Master queued w/err=0: serial=71783 error=0 17:17:42 Received message from Master: op=Filter serial=71784 17:17:42 Color wheel filter change from 0 to 0 17:17:42 FLIGetFilterPos err=0 currentPosition=0 17:17:42 FLIGetStepsRemaining err=0 RemainingSteps=0 17:17:42 Filter is already there-color wheel unchanged 17:17:43 Received message from Master: op=Shutter serial=71785 17:17:43 Shutter LASER close 17:17:43 Received message from Camera: op=State serial=71787 17:17:43 GetSingleValue result=40 Value=cccccccc 17:17:43 SkyScan query 17:17:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:17:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:17:43 Parameters OK 17:17:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:17:43 Set A/D data flow result=40 17:17:43 Set A/D channel type result=40 17:17:43 Set A/D encoding result=40 17:17:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:17:43 Set channel filter=0.000000e+000 result=40 17:17:43 Config A/D Result=40 17:17:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:17:43 Get A/D filter: -9.255963e+061 result=40 17:17:43 Get A/D value=-858993460 result=40 17:17:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:17:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:17:43 Parameters OK 17:17:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:17:43 Set A/D data flow result=40 17:17:43 Set A/D channel type result=40 17:17:43 Set A/D encoding result=40 17:17:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:17:43 Set channel filter=0.000000e+000 result=40 17:17:43 Config A/D Result=40 17:17:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:17:43 Get A/D filter: -9.255963e+061 result=40 17:17:43 Get A/D value=-858993460 result=40 17:17:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:17:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:17:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:17:43 Aux= 17:17:43 Message to Camera, serial 71787 queued 17:18:19 Received message from Master: op=PointingHead serial=71799 17:18:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:18:19 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:18:19 Point started: ret=0 17:18:19 point_skyscan result=0 17:18:20 Check angles 17:18:20 SkyScan query 17:18:21 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 17:18:21 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 17:18:21 Check angles 17:18:21 SkyScan query 17:18:22 SkyScan query done: ret=0 az=126.495<-8433 ze=38.505<-9433 Statuses=0009 0008 17:18:22 Msec=750 True Az=126.495 Ze=38.505 Az status=0009 Ze status=0008 17:18:22 Check angles 17:18:22 SkyScan query 17:18:22 SkyScan query done: ret=0 az=143.88<-9592 ze=38.505<-9433 Statuses=0009 0008 17:18:22 Msec=1500 True Az=143.88 Ze=38.505 Az status=0009 Ze status=0008 17:18:22 Check angles 17:18:22 SkyScan query 17:18:23 SkyScan query done: ret=0 az=161.34<-10756 ze=38.505<-9433 Statuses=0009 0008 17:18:23 Msec=2250 True Az=161.34 Ze=38.505 Az status=0009 Ze status=0008 17:18:23 Check angles 17:18:23 SkyScan query 17:18:24 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 17:18:24 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 17:18:24 Check angles 17:18:24 SkyScan query 17:18:25 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 17:18:25 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 17:18:25 Message to Master queued w/err=0: serial=71799 error=0 17:18:30 Received message from Master: op=Filter serial=71800 17:18:30 Color wheel filter change from 0 to 0 17:18:30 FLIGetFilterPos err=0 currentPosition=0 17:18:30 FLIGetStepsRemaining err=0 RemainingSteps=0 17:18:30 Filter is already there-color wheel unchanged 17:18:30 Received message from Master: op=Shutter serial=71801 17:18:30 Shutter LASER close 17:18:30 Received message from Camera: op=State serial=71803 17:18:30 GetSingleValue result=40 Value=cccccccc 17:18:30 SkyScan query 17:18:30 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:18:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:18:30 Parameters OK 17:18:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:18:30 Set A/D data flow result=40 17:18:30 Set A/D channel type result=40 17:18:30 Set A/D encoding result=40 17:18:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:18:30 Set channel filter=0.000000e+000 result=40 17:18:30 Config A/D Result=40 17:18:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:18:30 Get A/D filter: -9.255963e+061 result=40 17:18:30 Get A/D value=-858993460 result=40 17:18:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:18:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:18:30 Parameters OK 17:18:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:18:30 Set A/D data flow result=40 17:18:30 Set A/D channel type result=40 17:18:30 Set A/D encoding result=40 17:18:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:18:30 Set channel filter=0.000000e+000 result=40 17:18:30 Config A/D Result=40 17:18:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:18:30 Get A/D filter: -9.255963e+061 result=40 17:18:30 Get A/D value=-858993460 result=40 17:18:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:18:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:18:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:18:30 Aux= 17:18:30 Message to Camera, serial 71803 queued 17:19:07 Received message from Master: op=PointingHead serial=71816 17:19:07 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:19:07 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:19:07 Point started: ret=0 17:19:07 point_skyscan result=0 17:19:08 Check angles 17:19:08 SkyScan query 17:19:09 SkyScan query done: ret=0 az=152.625<-10175 ze=8.325<-11445 Statuses=0009 0009 17:19:09 Msec=0 True Az=152.625 Ze=8.325 Az status=0009 Ze status=0009 17:19:09 Check angles 17:19:09 SkyScan query 17:19:10 SkyScan query done: ret=0 az=134.67<-8978 ze=-13.035<-12869 Statuses=0009 0009 17:19:10 Msec=750 True Az=134.67 Ze=-13.035 Az status=0009 Ze status=0009 17:19:10 Check angles 17:19:10 SkyScan query 17:19:10 SkyScan query done: ret=0 az=117.075<-7805 ze=-34.02<-14268 Statuses=0009 0009 17:19:10 Msec=1500 True Az=117.075 Ze=-34.02 Az status=0009 Ze status=0009 17:19:11 Check angles 17:19:11 SkyScan query 17:19:11 SkyScan query done: ret=0 az=99.915<-6661 ze=-51.555<-15437 Statuses=0009 0009 17:19:11 Msec=2250 True Az=99.915 Ze=-51.555 Az status=0009 Ze status=0009 17:19:11 Check angles 17:19:11 SkyScan query 17:19:12 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 17:19:12 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 17:19:12 Check angles 17:19:12 SkyScan query 17:19:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:19:13 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:19:13 Message to Master queued w/err=0: serial=71816 error=0 17:19:18 Received message from Master: op=Filter serial=71817 17:19:18 Color wheel filter change from 0 to 0 17:19:18 FLIGetFilterPos err=0 currentPosition=0 17:19:18 FLIGetStepsRemaining err=0 RemainingSteps=0 17:19:18 Filter is already there-color wheel unchanged 17:19:18 Received message from Master: op=Shutter serial=71818 17:19:18 Shutter LASER close 17:19:18 Received message from Camera: op=State serial=71820 17:19:18 GetSingleValue result=40 Value=cccccccc 17:19:18 SkyScan query 17:19:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:19:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:19:18 Parameters OK 17:19:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:19:18 Set A/D data flow result=40 17:19:18 Set A/D channel type result=40 17:19:18 Set A/D encoding result=40 17:19:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:19:18 Set channel filter=0.000000e+000 result=40 17:19:18 Config A/D Result=40 17:19:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:19:18 Get A/D filter: -9.255963e+061 result=40 17:19:18 Get A/D value=-858993460 result=40 17:19:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:19:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:19:18 Parameters OK 17:19:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:19:18 Set A/D data flow result=40 17:19:18 Set A/D channel type result=40 17:19:18 Set A/D encoding result=40 17:19:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:19:18 Set channel filter=0.000000e+000 result=40 17:19:18 Config A/D Result=40 17:19:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:19:18 Get A/D filter: -9.255963e+061 result=40 17:19:18 Get A/D value=-858993460 result=40 17:19:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:19:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:19:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:19:18 Aux= 17:19:18 Message to Camera, serial 71820 queued 17:19:55 Received message from Master: op=PointingHead serial=71833 17:19:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:19:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:19:56 Point started: ret=0 17:19:56 point_skyscan result=0 17:19:56 Check angles 17:19:56 SkyScan query 17:19:57 SkyScan query done: ret=0 az=109.455<-7297 ze=-81.795<-17453 Statuses=0009 0009 17:19:57 Msec=0 True Az=109.455 Ze=-81.795 Az status=0009 Ze status=0009 17:19:57 Check angles 17:19:57 SkyScan query 17:19:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.17<-18878 Statuses=0008 0009 17:19:58 Msec=750 True Az=112.995 Ze=-103.17 Az status=0008 Ze status=0009 17:19:58 Check angles 17:19:58 SkyScan query 17:19:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.125<-20275 Statuses=0008 0009 17:19:58 Msec=1500 True Az=112.995 Ze=-124.125 Az status=0008 Ze status=0009 17:19:59 Check angles 17:19:59 SkyScan query 17:19:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.53<-21702 Statuses=0008 0009 17:19:59 Msec=2250 True Az=112.995 Ze=-145.53 Az status=0008 Ze status=0009 17:19:59 Check angles 17:19:59 SkyScan query 17:20:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.92<-23128 Statuses=0008 0009 17:20:00 Msec=3000 True Az=112.995 Ze=-166.92 Az status=0008 Ze status=0009 17:20:00 Check angles 17:20:00 SkyScan query 17:20:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:20:01 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:20:01 Message to Master queued w/err=0: serial=71833 error=0 17:20:06 Received message from Master: op=Filter serial=71834 17:20:06 Color wheel filter change from 0 to 0 17:20:06 FLIGetFilterPos err=0 currentPosition=0 17:20:06 FLIGetStepsRemaining err=0 RemainingSteps=0 17:20:06 Filter is already there-color wheel unchanged 17:20:06 Received message from Master: op=Shutter serial=71835 17:20:06 Shutter LASER open 17:20:06 Received message from Camera: op=State serial=71837 17:20:06 GetSingleValue result=40 Value=cccccccc 17:20:06 SkyScan query 17:20:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:20:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:20:07 Parameters OK 17:20:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:20:07 Set A/D data flow result=40 17:20:07 Set A/D channel type result=40 17:20:07 Set A/D encoding result=40 17:20:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:20:07 Set channel filter=0.000000e+000 result=40 17:20:07 Config A/D Result=40 17:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:20:07 Get A/D filter: -9.255963e+061 result=40 17:20:07 Get A/D value=-858993460 result=40 17:20:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:20:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:20:07 Parameters OK 17:20:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:20:07 Set A/D data flow result=40 17:20:07 Set A/D channel type result=40 17:20:07 Set A/D encoding result=40 17:20:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:20:07 Set channel filter=0.000000e+000 result=40 17:20:07 Config A/D Result=40 17:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:20:07 Get A/D filter: -9.255963e+061 result=40 17:20:07 Get A/D value=-858993460 result=40 17:20:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:20:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:20:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:20:07 Aux= 17:20:07 Message to Camera, serial 71837 queued 17:20:15 Received message from Master: op=Shutter serial=71847 17:20:15 Shutter LASER close 17:20:16 Received message from Master: op=PointingHead serial=71851 17:20:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:20:16 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:20:16 Point started: ret=0 17:20:16 point_skyscan result=0 17:20:17 Check angles 17:20:17 SkyScan query 17:20:17 SkyScan query done: ret=0 az=89.49<-5966 ze=156.705<-1553 Statuses=0009 0009 17:20:17 Msec=0 True Az=89.49 Ze=156.705 Az status=0009 Ze status=0009 17:20:17 Check angles 17:20:17 SkyScan query 17:20:18 SkyScan query done: ret=0 az=71.94<-4796 ze=135.75<-2950 Statuses=0009 0009 17:20:18 Msec=750 True Az=71.94 Ze=135.75 Az status=0009 Ze status=0009 17:20:18 Check angles 17:20:18 SkyScan query 17:20:19 SkyScan query done: ret=0 az=54.735<-3649 ze=114.765<-4349 Statuses=0009 0009 17:20:19 Msec=1500 True Az=54.735 Ze=114.765 Az status=0009 Ze status=0009 17:20:19 Check angles 17:20:19 SkyScan query 17:20:20 SkyScan query done: ret=0 az=40.905<-2727 ze=93.825<-5745 Statuses=0009 0009 17:20:20 Msec=2250 True Az=40.905 Ze=93.825 Az status=0009 Ze status=0009 17:20:20 Check angles 17:20:20 SkyScan query 17:20:20 SkyScan query done: ret=0 az=40.995<-2733 ze=72.87<-7142 Statuses=0008 0009 17:20:20 Msec=3000 True Az=40.995 Ze=72.87 Az status=0008 Ze status=0009 17:20:20 Check angles 17:20:20 SkyScan query 17:20:21 SkyScan query done: ret=0 az=40.995<-2733 ze=52.485<-8501 Statuses=0008 0009 17:20:21 Msec=3750 True Az=40.995 Ze=52.485 Az status=0008 Ze status=0009 17:20:21 Check angles 17:20:21 SkyScan query 17:20:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:20:22 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:20:22 Message to Master queued w/err=0: serial=71851 error=0 17:20:27 Received message from Master: op=Filter serial=71852 17:20:27 Color wheel filter change from 0 to 0 17:20:27 FLIGetFilterPos err=0 currentPosition=0 17:20:27 FLIGetStepsRemaining err=0 RemainingSteps=0 17:20:27 Filter is already there-color wheel unchanged 17:20:27 Received message from Master: op=Shutter serial=71853 17:20:27 Shutter LASER close 17:20:27 Received message from Camera: op=State serial=71855 17:20:27 GetSingleValue result=40 Value=cccccccc 17:20:27 SkyScan query 17:20:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:20:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:20:28 Parameters OK 17:20:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:20:28 Set A/D data flow result=40 17:20:28 Set A/D channel type result=40 17:20:28 Set A/D encoding result=40 17:20:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:20:28 Set channel filter=0.000000e+000 result=40 17:20:28 Config A/D Result=40 17:20:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:20:28 Get A/D filter: -9.255963e+061 result=40 17:20:28 Get A/D value=-858993460 result=40 17:20:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:20:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:20:28 Parameters OK 17:20:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:20:28 Set A/D data flow result=40 17:20:28 Set A/D channel type result=40 17:20:28 Set A/D encoding result=40 17:20:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:20:28 Set channel filter=0.000000e+000 result=40 17:20:28 Config A/D Result=40 17:20:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:20:28 Get A/D filter: -9.255963e+061 result=40 17:20:28 Get A/D value=-858993460 result=40 17:20:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:20:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:20:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:20:28 Aux= 17:20:28 Message to Camera, serial 71855 queued 17:21:04 Received message from Master: op=PointingHead serial=71868 17:21:04 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:21:04 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:21:05 Point started: ret=0 17:21:05 point_skyscan result=0 17:21:06 Check angles 17:21:06 SkyScan query 17:21:06 SkyScan query done: ret=0 az=63.975<-4265 ze=66.54<-7564 Statuses=0009 0008 17:21:06 Msec=0 True Az=63.975 Ze=66.54 Az status=0009 Ze status=0008 17:21:06 Check angles 17:21:06 SkyScan query 17:21:07 SkyScan query done: ret=0 az=81.48<-5432 ze=66.51<-7566 Statuses=0009 0008 17:21:07 Msec=750 True Az=81.48 Ze=66.51 Az status=0009 Ze status=0008 17:21:07 Check angles 17:21:07 SkyScan query 17:21:08 SkyScan query done: ret=0 az=98.85<-6590 ze=66.495<-7567 Statuses=0009 0008 17:21:08 Msec=1500 True Az=98.85 Ze=66.495 Az status=0009 Ze status=0008 17:21:08 Check angles 17:21:08 SkyScan query 17:21:08 SkyScan query done: ret=0 az=116.25<-7750 ze=66.495<-7567 Statuses=0009 0008 17:21:08 Msec=2250 True Az=116.25 Ze=66.495 Az status=0009 Ze status=0008 17:21:09 Check angles 17:21:09 SkyScan query 17:21:09 SkyScan query done: ret=0 az=133.68<-8912 ze=66.495<-7567 Statuses=0009 0008 17:21:09 Msec=3000 True Az=133.68 Ze=66.495 Az status=0009 Ze status=0008 17:21:09 Check angles 17:21:09 SkyScan query 17:21:10 SkyScan query done: ret=0 az=151.29<-10086 ze=66.495<-7567 Statuses=0009 0008 17:21:10 Msec=3750 True Az=151.29 Ze=66.495 Az status=0009 Ze status=0008 17:21:10 Check angles 17:21:10 SkyScan query 17:21:11 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 17:21:11 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 17:21:11 Message to Master queued w/err=0: serial=71868 error=0 17:21:16 Received message from Master: op=Filter serial=71869 17:21:16 Color wheel filter change from 0 to 0 17:21:16 FLIGetFilterPos err=0 currentPosition=0 17:21:16 FLIGetStepsRemaining err=0 RemainingSteps=0 17:21:16 Filter is already there-color wheel unchanged 17:21:16 Received message from Master: op=Shutter serial=71870 17:21:16 Shutter LASER close 17:21:16 Received message from Camera: op=State serial=71872 17:21:16 GetSingleValue result=40 Value=cccccccc 17:21:16 SkyScan query 17:21:16 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:21:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:21:16 Parameters OK 17:21:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:21:16 Set A/D data flow result=40 17:21:16 Set A/D channel type result=40 17:21:16 Set A/D encoding result=40 17:21:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:21:16 Set channel filter=0.000000e+000 result=40 17:21:16 Config A/D Result=40 17:21:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:21:16 Get A/D filter: -9.255963e+061 result=40 17:21:16 Get A/D value=-858993460 result=40 17:21:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:21:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:21:16 Parameters OK 17:21:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:21:16 Set A/D data flow result=40 17:21:16 Set A/D channel type result=40 17:21:16 Set A/D encoding result=40 17:21:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:21:16 Set channel filter=0.000000e+000 result=40 17:21:16 Config A/D Result=40 17:21:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:21:16 Get A/D filter: -9.255963e+061 result=40 17:21:16 Get A/D value=-858993460 result=40 17:21:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:21:16 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:21:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:21:16 Aux= 17:21:16 Message to Camera, serial 71872 queued 17:21:53 Received message from Master: op=PointingHead serial=71885 17:21:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:21:53 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:21:54 Point started: ret=0 17:21:54 point_skyscan result=0 17:21:54 Check angles 17:21:54 SkyScan query 17:21:55 SkyScan query done: ret=0 az=134.835<-8989 ze=36.78<-9548 Statuses=0009 0009 17:21:55 Msec=0 True Az=134.835 Ze=36.78 Az status=0009 Ze status=0009 17:21:55 Check angles 17:21:55 SkyScan query 17:21:56 SkyScan query done: ret=0 az=117.465<-7831 ze=15.84<-10944 Statuses=0009 0009 17:21:56 Msec=750 True Az=117.465 Ze=15.84 Az status=0009 Ze status=0009 17:21:56 Check angles 17:21:56 SkyScan query 17:21:56 SkyScan query done: ret=0 az=99.765<-6651 ze=-5.55<-12370 Statuses=0009 0009 17:21:56 Msec=1500 True Az=99.765 Ze=-5.55 Az status=0009 Ze status=0009 17:21:57 Check angles 17:21:57 SkyScan query 17:21:57 SkyScan query done: ret=0 az=82.14<-5476 ze=-26.475<-13765 Statuses=0009 0009 17:21:57 Msec=2250 True Az=82.14 Ze=-26.475 Az status=0009 Ze status=0009 17:21:57 Check angles 17:21:57 SkyScan query 17:21:58 SkyScan query done: ret=0 az=64.725<-4315 ze=-38.565<-14571 Statuses=0009 0008 17:21:58 Msec=3000 True Az=64.725 Ze=-38.565 Az status=0009 Ze status=0008 17:21:58 Check angles 17:21:58 SkyScan query 17:21:59 SkyScan query done: ret=0 az=46.95<-3130 ze=-38.535<-14569 Statuses=0009 0008 17:21:59 Msec=3750 True Az=46.95 Ze=-38.535 Az status=0009 Ze status=0008 17:21:59 Check angles 17:21:59 SkyScan query 17:22:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:22:00 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:22:00 Message to Master queued w/err=0: serial=71885 error=0 17:22:05 Received message from Master: op=Filter serial=71886 17:22:05 Color wheel filter change from 0 to 0 17:22:05 FLIGetFilterPos err=0 currentPosition=0 17:22:05 FLIGetStepsRemaining err=0 RemainingSteps=0 17:22:05 Filter is already there-color wheel unchanged 17:22:05 Received message from Master: op=Shutter serial=71887 17:22:05 Shutter LASER close 17:22:05 Received message from Camera: op=State serial=71889 17:22:05 GetSingleValue result=40 Value=cccccccc 17:22:05 SkyScan query 17:22:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:22:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:05 Parameters OK 17:22:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:05 Set A/D data flow result=40 17:22:05 Set A/D channel type result=40 17:22:05 Set A/D encoding result=40 17:22:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:05 Set channel filter=0.000000e+000 result=40 17:22:05 Config A/D Result=40 17:22:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:05 Get A/D filter: -9.255963e+061 result=40 17:22:05 Get A/D value=-858993460 result=40 17:22:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:05 Parameters OK 17:22:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:05 Set A/D data flow result=40 17:22:05 Set A/D channel type result=40 17:22:05 Set A/D encoding result=40 17:22:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:05 Set channel filter=0.000000e+000 result=40 17:22:05 Config A/D Result=40 17:22:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:05 Get A/D filter: -9.255963e+061 result=40 17:22:05 Get A/D value=-858993460 result=40 17:22:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:22:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:22:05 Aux= 17:22:05 Message to Camera, serial 71889 queued 17:22:42 Received message from Master: op=PointingHead serial=71902 17:22:42 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:22:42 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:22:42 Point started: ret=0 17:22:42 point_skyscan result=0 17:22:43 Check angles 17:22:43 SkyScan query 17:22:44 SkyScan query done: ret=0 az=64.44<-4296 ze=-68.685<-16579 Statuses=0009 0009 17:22:44 Msec=0 True Az=64.44 Ze=-68.685 Az status=0009 Ze status=0009 17:22:44 Check angles 17:22:44 SkyScan query 17:22:45 SkyScan query done: ret=0 az=82.23<-5482 ze=-90.09<-18006 Statuses=0009 0009 17:22:45 Msec=750 True Az=82.23 Ze=-90.09 Az status=0009 Ze status=0009 17:22:45 Check angles 17:22:45 SkyScan query 17:22:45 SkyScan query done: ret=0 az=99.78<-6652 ze=-111.03<-19402 Statuses=0009 0009 17:22:45 Msec=1500 True Az=99.78 Ze=-111.03 Az status=0009 Ze status=0009 17:22:46 Check angles 17:22:46 SkyScan query 17:22:46 SkyScan query done: ret=0 az=117.255<-7817 ze=-131.985<-20799 Statuses=0009 0009 17:22:46 Msec=2250 True Az=117.255 Ze=-131.985 Az status=0009 Ze status=0009 17:22:46 Check angles 17:22:46 SkyScan query 17:22:47 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 17:22:47 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 17:22:47 Check angles 17:22:47 SkyScan query 17:22:48 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 17:22:48 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 17:22:48 Message to Master queued w/err=0: serial=71902 error=0 17:22:53 Received message from Master: op=Filter serial=71903 17:22:53 Color wheel filter change from 0 to 0 17:22:53 FLIGetFilterPos err=0 currentPosition=0 17:22:53 FLIGetStepsRemaining err=0 RemainingSteps=0 17:22:53 Filter is already there-color wheel unchanged 17:22:53 Received message from Master: op=Shutter serial=71904 17:22:53 Shutter LASER close 17:22:53 Received message from Camera: op=State serial=71906 17:22:53 GetSingleValue result=40 Value=cccccccc 17:22:53 SkyScan query 17:22:53 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:22:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:53 Parameters OK 17:22:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:53 Set A/D data flow result=40 17:22:53 Set A/D channel type result=40 17:22:53 Set A/D encoding result=40 17:22:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:53 Set channel filter=0.000000e+000 result=40 17:22:53 Config A/D Result=40 17:22:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:53 Get A/D filter: -9.255963e+061 result=40 17:22:53 Get A/D value=-858993460 result=40 17:22:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:53 Parameters OK 17:22:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:53 Set A/D data flow result=40 17:22:53 Set A/D channel type result=40 17:22:53 Set A/D encoding result=40 17:22:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:53 Set channel filter=0.000000e+000 result=40 17:22:53 Config A/D Result=40 17:22:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:53 Get A/D filter: -9.255963e+061 result=40 17:22:53 Get A/D value=-858993460 result=40 17:22:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:53 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:22:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:22:53 Aux= 17:22:53 Message to Camera, serial 71906 queued 17:23:29 Received message from Master: op=PointingHead serial=71918 17:23:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:23:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:23:30 Point started: ret=0 17:23:30 point_skyscan result=0 17:23:30 Check angles 17:23:30 SkyScan query 17:23:31 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.165<-23411 Statuses=0009 0009 17:23:31 Msec=0 True Az=113.01 Ze=-171.165 Az status=0009 Ze status=0009 17:23:31 Check angles 17:23:31 SkyScan query 17:23:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 17:23:32 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 17:23:32 Message to Master queued w/err=0: serial=71918 error=0 17:23:37 Received message from Master: op=Filter serial=71919 17:23:37 Color wheel filter change from 0 to 0 17:23:37 FLIGetFilterPos err=0 currentPosition=0 17:23:37 FLIGetStepsRemaining err=0 RemainingSteps=0 17:23:37 Filter is already there-color wheel unchanged 17:23:37 Received message from Master: op=Shutter serial=71920 17:23:37 Shutter LASER open 17:23:37 Received message from Camera: op=State serial=71922 17:23:37 GetSingleValue result=40 Value=cccccccc 17:23:37 SkyScan query 17:23:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:23:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:23:38 Parameters OK 17:23:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:23:38 Set A/D data flow result=40 17:23:38 Set A/D channel type result=40 17:23:38 Set A/D encoding result=40 17:23:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:23:38 Set channel filter=0.000000e+000 result=40 17:23:38 Config A/D Result=40 17:23:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:23:38 Get A/D filter: -9.255963e+061 result=40 17:23:38 Get A/D value=-858993460 result=40 17:23:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:23:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:23:38 Parameters OK 17:23:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:23:38 Set A/D data flow result=40 17:23:38 Set A/D channel type result=40 17:23:38 Set A/D encoding result=40 17:23:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:23:38 Set channel filter=0.000000e+000 result=40 17:23:38 Config A/D Result=40 17:23:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:23:38 Get A/D filter: -9.255963e+061 result=40 17:23:38 Get A/D value=-858993460 result=40 17:23:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:23:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:23:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:23:38 Aux= 17:23:38 Message to Camera, serial 71922 queued 17:23:46 Received message from Master: op=Shutter serial=71932 17:23:46 Shutter LASER close 17:23:47 Received message from Master: op=PointingHead serial=71936 17:23:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:23:47 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:23:47 Point started: ret=0 17:23:47 point_skyscan result=0 17:23:48 Check angles 17:23:48 SkyScan query 17:23:48 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.46<-21564 Statuses=0009 0009 17:23:48 Msec=0 True Az=135.825 Ze=-143.46 Az status=0009 Ze status=0009 17:23:49 Check angles 17:23:49 SkyScan query 17:23:49 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.07<-20138 Statuses=0009 0009 17:23:49 Msec=750 True Az=153.615 Ze=-122.07 Az status=0009 Ze status=0009 17:23:49 Check angles 17:23:49 SkyScan query 17:23:50 SkyScan query done: ret=0 az=171.06<-11404 ze=-101.175<-18745 Statuses=0009 0009 17:23:50 Msec=1500 True Az=171.06 Ze=-101.175 Az status=0009 Ze status=0009 17:23:50 Check angles 17:23:50 SkyScan query 17:23:51 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.19<-17346 Statuses=0008 0009 17:23:51 Msec=2250 True Az=176.025 Ze=-80.19 Az status=0008 Ze status=0009 17:23:51 Check angles 17:23:51 SkyScan query 17:23:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.77<-15918 Statuses=0008 0009 17:23:51 Msec=3000 True Az=175.995 Ze=-58.77 Az status=0008 Ze status=0009 17:23:52 Check angles 17:23:52 SkyScan query 17:23:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 17:23:52 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 17:23:52 Message to Master queued w/err=0: serial=71936 error=0 17:23:57 Received message from Master: op=Filter serial=71937 17:23:57 Color wheel filter change from 0 to 0 17:23:57 FLIGetFilterPos err=0 currentPosition=0 17:23:57 FLIGetStepsRemaining err=0 RemainingSteps=0 17:23:57 Filter is already there-color wheel unchanged 17:23:57 Received message from Master: op=Shutter serial=71938 17:23:57 Shutter LASER close 17:23:58 Received message from Camera: op=State serial=71940 17:23:58 GetSingleValue result=40 Value=cccccccc 17:23:58 SkyScan query 17:23:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:23:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:23:58 Parameters OK 17:23:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:23:58 Set A/D data flow result=40 17:23:58 Set A/D channel type result=40 17:23:58 Set A/D encoding result=40 17:23:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:23:58 Set channel filter=0.000000e+000 result=40 17:23:58 Config A/D Result=40 17:23:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:23:58 Get A/D filter: -9.255963e+061 result=40 17:23:58 Get A/D value=-858993460 result=40 17:23:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:23:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:23:58 Parameters OK 17:23:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:23:58 Set A/D data flow result=40 17:23:58 Set A/D channel type result=40 17:23:58 Set A/D encoding result=40 17:23:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:23:58 Set channel filter=0.000000e+000 result=40 17:23:58 Config A/D Result=40 17:23:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:23:58 Get A/D filter: -9.255963e+061 result=40 17:23:58 Get A/D value=-858993460 result=40 17:23:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:23:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:23:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:23:58 Aux= 17:23:58 Message to Camera, serial 71940 queued 17:24:35 Received message from Master: op=PointingHead serial=71953 17:24:35 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:24:35 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:24:35 Point started: ret=0 17:24:35 point_skyscan result=0 17:24:36 Check angles 17:24:36 SkyScan query 17:24:37 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.915<-13461 Statuses=0009 0009 17:24:37 Msec=0 True Az=153.12 Ze=-21.915 Az status=0009 Ze status=0009 17:24:37 Check angles 17:24:37 SkyScan query 17:24:37 SkyScan query done: ret=0 az=135.735<-9049 ze=-0.9<-12060 Statuses=0009 0009 17:24:37 Msec=750 True Az=135.735 Ze=-0.9 Az status=0009 Ze status=0009 17:24:38 Check angles 17:24:38 SkyScan query 17:24:38 SkyScan query done: ret=0 az=118.065<-7871 ze=20.04<-10664 Statuses=0009 0009 17:24:38 Msec=1500 True Az=118.065 Ze=20.04 Az status=0009 Ze status=0009 17:24:38 Check angles 17:24:38 SkyScan query 17:24:39 SkyScan query done: ret=0 az=100.275<-6685 ze=41.445<-9237 Statuses=0009 0009 17:24:39 Msec=2250 True Az=100.275 Ze=41.445 Az status=0009 Ze status=0009 17:24:39 Check angles 17:24:39 SkyScan query 17:24:40 SkyScan query done: ret=0 az=86.055<-5737 ze=51.555<-8563 Statuses=0009 0008 17:24:40 Msec=3000 True Az=86.055 Ze=51.555 Az status=0009 Ze status=0008 17:24:40 Check angles 17:24:40 SkyScan query 17:24:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:24:40 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:24:40 Message to Master queued w/err=0: serial=71953 error=0 17:24:45 Received message from Master: op=Filter serial=71954 17:24:45 Color wheel filter change from 0 to 0 17:24:45 FLIGetFilterPos err=0 currentPosition=0 17:24:45 FLIGetStepsRemaining err=0 RemainingSteps=0 17:24:45 Filter is already there-color wheel unchanged 17:24:46 Received message from Master: op=Shutter serial=71955 17:24:46 Shutter LASER close 17:24:46 Received message from Camera: op=State serial=71957 17:24:46 GetSingleValue result=40 Value=cccccccc 17:24:46 SkyScan query 17:24:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:24:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:24:46 Parameters OK 17:24:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:24:46 Set A/D data flow result=40 17:24:46 Set A/D channel type result=40 17:24:46 Set A/D encoding result=40 17:24:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:24:46 Set channel filter=0.000000e+000 result=40 17:24:46 Config A/D Result=40 17:24:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:24:46 Get A/D filter: -9.255963e+061 result=40 17:24:46 Get A/D value=-858993460 result=40 17:24:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:24:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:24:46 Parameters OK 17:24:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:24:46 Set A/D data flow result=40 17:24:46 Set A/D channel type result=40 17:24:46 Set A/D encoding result=40 17:24:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:24:46 Set channel filter=0.000000e+000 result=40 17:24:46 Config A/D Result=40 17:24:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:24:46 Get A/D filter: -9.255963e+061 result=40 17:24:46 Get A/D value=-858993460 result=40 17:24:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:24:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:24:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:24:46 Aux= 17:24:46 Message to Camera, serial 71957 queued 17:25:23 Received message from Master: op=PointingHead serial=71970 17:25:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:25:23 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:25:23 Point started: ret=0 17:25:23 point_skyscan result=0 17:25:24 Check angles 17:25:24 SkyScan query 17:25:25 SkyScan query done: ret=0 az=108.84<-7256 ze=38.49<-9434 Statuses=0009 0008 17:25:25 Msec=0 True Az=108.84 Ze=38.49 Az status=0009 Ze status=0008 17:25:25 Check angles 17:25:25 SkyScan query 17:25:26 SkyScan query done: ret=0 az=126.75<-8450 ze=38.505<-9433 Statuses=0009 0008 17:25:26 Msec=750 True Az=126.75 Ze=38.505 Az status=0009 Ze status=0008 17:25:26 Check angles 17:25:26 SkyScan query 17:25:26 SkyScan query done: ret=0 az=144.12<-9608 ze=38.505<-9433 Statuses=0009 0008 17:25:26 Msec=1500 True Az=144.12 Ze=38.505 Az status=0009 Ze status=0008 17:25:26 Check angles 17:25:26 SkyScan query 17:25:27 SkyScan query done: ret=0 az=161.61<-10774 ze=38.505<-9433 Statuses=0009 0008 17:25:27 Msec=2250 True Az=161.61 Ze=38.505 Az status=0009 Ze status=0008 17:25:27 Check angles 17:25:27 SkyScan query 17:25:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 17:25:28 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 17:25:28 Check angles 17:25:28 SkyScan query 17:25:29 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 17:25:29 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 17:25:29 Message to Master queued w/err=0: serial=71970 error=0 17:25:34 Received message from Master: op=Filter serial=71971 17:25:34 Color wheel filter change from 0 to 0 17:25:34 FLIGetFilterPos err=0 currentPosition=0 17:25:34 FLIGetStepsRemaining err=0 RemainingSteps=0 17:25:34 Filter is already there-color wheel unchanged 17:25:34 Received message from Master: op=Shutter serial=71972 17:25:34 Shutter LASER close 17:25:34 Received message from Camera: op=State serial=71974 17:25:34 GetSingleValue result=40 Value=cccccccc 17:25:34 SkyScan query 17:25:34 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:25:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:25:34 Parameters OK 17:25:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:25:34 Set A/D data flow result=40 17:25:34 Set A/D channel type result=40 17:25:34 Set A/D encoding result=40 17:25:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:25:34 Set channel filter=0.000000e+000 result=40 17:25:34 Config A/D Result=40 17:25:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:25:34 Get A/D filter: -9.255963e+061 result=40 17:25:34 Get A/D value=-858993460 result=40 17:25:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:25:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:25:34 Parameters OK 17:25:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:25:34 Set A/D data flow result=40 17:25:34 Set A/D channel type result=40 17:25:34 Set A/D encoding result=40 17:25:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:25:34 Set channel filter=0.000000e+000 result=40 17:25:34 Config A/D Result=40 17:25:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:25:34 Get A/D filter: -9.255963e+061 result=40 17:25:34 Get A/D value=-858993460 result=40 17:25:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:25:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:25:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:25:34 Aux= 17:25:34 Message to Camera, serial 71974 queued 17:26:11 Received message from Master: op=PointingHead serial=71987 17:26:11 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:26:11 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:26:12 Point started: ret=0 17:26:12 point_skyscan result=0 17:26:12 Check angles 17:26:12 SkyScan query 17:26:13 SkyScan query done: ret=0 az=153.105<-10207 ze=8.79<-11414 Statuses=0009 0009 17:26:13 Msec=0 True Az=153.105 Ze=8.79 Az status=0009 Ze status=0009 17:26:13 Check angles 17:26:13 SkyScan query 17:26:14 SkyScan query done: ret=0 az=135.72<-9048 ze=-12.195<-12813 Statuses=0009 0009 17:26:14 Msec=750 True Az=135.72 Ze=-12.195 Az status=0009 Ze status=0009 17:26:14 Check angles 17:26:14 SkyScan query 17:26:14 SkyScan query done: ret=0 az=118.095<-7873 ze=-33.105<-14207 Statuses=0009 0009 17:26:14 Msec=1500 True Az=118.095 Ze=-33.105 Az status=0009 Ze status=0009 17:26:15 Check angles 17:26:15 SkyScan query [UTC 2018-12-11 17:26:15] 17:26:15 SkyScan query done: ret=0 az=100.395<-6693 ze=-51.555<-15437 Statuses=0009 0009 17:26:15 Msec=2250 True Az=100.395 Ze=-51.555 Az status=0009 Ze status=0009 17:26:15 Check angles 17:26:15 SkyScan query 17:26:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 17:26:16 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 17:26:16 Check angles 17:26:16 SkyScan query 17:26:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:26:17 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:26:17 Message to Master queued w/err=0: serial=71987 error=0 17:26:22 Received message from Master: op=Filter serial=71988 17:26:22 Color wheel filter change from 0 to 0 17:26:22 FLIGetFilterPos err=0 currentPosition=0 17:26:22 FLIGetStepsRemaining err=0 RemainingSteps=0 17:26:22 Filter is already there-color wheel unchanged 17:26:22 Received message from Master: op=Shutter serial=71989 17:26:22 Shutter LASER close 17:26:22 Received message from Camera: op=State serial=71991 17:26:22 GetSingleValue result=40 Value=cccccccc 17:26:22 SkyScan query 17:26:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:26:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:26:22 Parameters OK 17:26:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:26:22 Set A/D data flow result=40 17:26:22 Set A/D channel type result=40 17:26:22 Set A/D encoding result=40 17:26:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:26:22 Set channel filter=0.000000e+000 result=40 17:26:22 Config A/D Result=40 17:26:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:26:22 Get A/D filter: -9.255963e+061 result=40 17:26:22 Get A/D value=-858993460 result=40 17:26:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:26:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:26:22 Parameters OK 17:26:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:26:22 Set A/D data flow result=40 17:26:22 Set A/D channel type result=40 17:26:22 Set A/D encoding result=40 17:26:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:26:22 Set channel filter=0.000000e+000 result=40 17:26:22 Config A/D Result=40 17:26:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:26:22 Get A/D filter: -9.255963e+061 result=40 17:26:22 Get A/D value=-858993460 result=40 17:26:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:26:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:26:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:26:22 Aux= 17:26:22 Message to Camera, serial 71991 queued 17:26:59 Received message from Master: op=PointingHead serial=72004 17:26:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:26:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:27:00 Point started: ret=0 17:27:00 point_skyscan result=0 17:27:00 Check angles 17:27:00 SkyScan query 17:27:01 SkyScan query done: ret=0 az=108.945<-7263 ze=-81.045<-17403 Statuses=0009 0009 17:27:01 Msec=0 True Az=108.945 Ze=-81.045 Az status=0009 Ze status=0009 17:27:01 Check angles 17:27:01 SkyScan query 17:27:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.97<-18798 Statuses=0008 0009 17:27:02 Msec=750 True Az=112.995 Ze=-101.97 Az status=0008 Ze status=0009 17:27:02 Check angles 17:27:02 SkyScan query 17:27:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.955<-20197 Statuses=0008 0009 17:27:02 Msec=1500 True Az=112.995 Ze=-122.955 Az status=0008 Ze status=0009 17:27:03 Check angles 17:27:03 SkyScan query 17:27:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.91<-21594 Statuses=0008 0009 17:27:03 Msec=2250 True Az=112.995 Ze=-143.91 Az status=0008 Ze status=0009 17:27:03 Check angles 17:27:03 SkyScan query 17:27:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.865<-22991 Statuses=0008 0009 17:27:04 Msec=3000 True Az=112.995 Ze=-164.865 Az status=0008 Ze status=0009 17:27:04 Check angles 17:27:04 SkyScan query 17:27:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 17:27:05 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 17:27:05 Message to Master queued w/err=0: serial=72004 error=0 17:27:10 Received message from Master: op=Filter serial=72005 17:27:10 Color wheel filter change from 0 to 0 17:27:10 FLIGetFilterPos err=0 currentPosition=0 17:27:10 FLIGetStepsRemaining err=0 RemainingSteps=0 17:27:10 Filter is already there-color wheel unchanged 17:27:10 Received message from Master: op=Shutter serial=72006 17:27:10 Shutter LASER open 17:27:10 Received message from Camera: op=State serial=72008 17:27:10 GetSingleValue result=40 Value=cccccccc 17:27:10 SkyScan query 17:27:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:27:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:27:11 Parameters OK 17:27:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:27:11 Set A/D data flow result=40 17:27:11 Set A/D channel type result=40 17:27:11 Set A/D encoding result=40 17:27:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:27:11 Set channel filter=0.000000e+000 result=40 17:27:11 Config A/D Result=40 17:27:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:27:11 Get A/D filter: -9.255963e+061 result=40 17:27:11 Get A/D value=-858993460 result=40 17:27:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:27:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:27:11 Parameters OK 17:27:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:27:11 Set A/D data flow result=40 17:27:11 Set A/D channel type result=40 17:27:11 Set A/D encoding result=40 17:27:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:27:11 Set channel filter=0.000000e+000 result=40 17:27:11 Config A/D Result=40 17:27:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:27:11 Get A/D filter: -9.255963e+061 result=40 17:27:11 Get A/D value=-858993460 result=40 17:27:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:27:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:27:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:27:11 Aux= 17:27:11 Message to Camera, serial 72008 queued 17:27:19 Received message from Master: op=Shutter serial=72018 17:27:19 Shutter LASER close 17:27:20 Received message from Master: op=PointingHead serial=72022 17:27:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:27:20 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:27:20 Point started: ret=0 17:27:20 point_skyscan result=0 17:27:21 Check angles 17:27:21 SkyScan query 17:27:21 SkyScan query done: ret=0 az=89.895<-5993 ze=157.215<-1519 Statuses=0009 0009 17:27:21 Msec=0 True Az=89.895 Ze=157.215 Az status=0009 Ze status=0009 17:27:21 Check angles 17:27:21 SkyScan query 17:27:22 SkyScan query done: ret=0 az=72.345<-4823 ze=136.245<-2917 Statuses=0009 0009 17:27:22 Msec=750 True Az=72.345 Ze=136.245 Az status=0009 Ze status=0009 17:27:22 Check angles 17:27:22 SkyScan query 17:27:23 SkyScan query done: ret=0 az=55.02<-3668 ze=115.335<-4311 Statuses=0009 0009 17:27:23 Msec=1500 True Az=55.02 Ze=115.335 Az status=0009 Ze status=0009 17:27:23 Check angles 17:27:23 SkyScan query 17:27:23 SkyScan query done: ret=0 az=40.845<-2723 ze=94.32<-5712 Statuses=0009 0009 17:27:23 Msec=2250 True Az=40.845 Ze=94.32 Az status=0009 Ze status=0009 17:27:24 Check angles 17:27:24 SkyScan query 17:27:24 SkyScan query done: ret=0 az=40.995<-2733 ze=73.395<-7107 Statuses=0008 0009 17:27:24 Msec=3000 True Az=40.995 Ze=73.395 Az status=0008 Ze status=0009 17:27:24 Check angles 17:27:24 SkyScan query 17:27:25 SkyScan query done: ret=0 az=40.995<-2733 ze=52.815<-8479 Statuses=0008 0009 17:27:25 Msec=3750 True Az=40.995 Ze=52.815 Az status=0008 Ze status=0009 17:27:25 Check angles 17:27:25 SkyScan query 17:27:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:27:26 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:27:26 Message to Master queued w/err=0: serial=72022 error=0 17:27:31 Received message from Master: op=Filter serial=72023 17:27:31 Color wheel filter change from 0 to 0 17:27:31 FLIGetFilterPos err=0 currentPosition=0 17:27:31 FLIGetStepsRemaining err=0 RemainingSteps=0 17:27:31 Filter is already there-color wheel unchanged 17:27:31 Received message from Master: op=Shutter serial=72024 17:27:31 Shutter LASER close 17:27:31 Received message from Camera: op=State serial=72026 17:27:31 GetSingleValue result=40 Value=cccccccc 17:27:31 SkyScan query 17:27:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:27:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:27:32 Parameters OK 17:27:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:27:32 Set A/D data flow result=40 17:27:32 Set A/D channel type result=40 17:27:32 Set A/D encoding result=40 17:27:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:27:32 Set channel filter=0.000000e+000 result=40 17:27:32 Config A/D Result=40 17:27:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:27:32 Get A/D filter: -9.255963e+061 result=40 17:27:32 Get A/D value=-858993460 result=40 17:27:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:27:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:27:32 Parameters OK 17:27:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:27:32 Set A/D data flow result=40 17:27:32 Set A/D channel type result=40 17:27:32 Set A/D encoding result=40 17:27:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:27:32 Set channel filter=0.000000e+000 result=40 17:27:32 Config A/D Result=40 17:27:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:27:32 Get A/D filter: -9.255963e+061 result=40 17:27:32 Get A/D value=-858993460 result=40 17:27:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:27:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:27:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:27:32 Aux= 17:27:32 Message to Camera, serial 72026 queued 17:28:08 Received message from Master: op=PointingHead serial=72039 17:28:08 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:28:08 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:28:09 Point started: ret=0 17:28:09 point_skyscan result=0 17:28:10 Check angles 17:28:10 SkyScan query 17:28:10 SkyScan query done: ret=0 az=64.2<-4280 ze=66.555<-7563 Statuses=0009 0008 17:28:10 Msec=0 True Az=64.2 Ze=66.555 Az status=0009 Ze status=0008 17:28:10 Check angles 17:28:10 SkyScan query 17:28:11 SkyScan query done: ret=0 az=81.87<-5458 ze=66.51<-7566 Statuses=0009 0008 17:28:11 Msec=750 True Az=81.87 Ze=66.51 Az status=0009 Ze status=0008 17:28:11 Check angles 17:28:11 SkyScan query 17:28:12 SkyScan query done: ret=0 az=99.165<-6611 ze=66.495<-7567 Statuses=0009 0008 17:28:12 Msec=1500 True Az=99.165 Ze=66.495 Az status=0009 Ze status=0008 17:28:12 Check angles 17:28:12 SkyScan query 17:28:12 SkyScan query done: ret=0 az=117.165<-7811 ze=66.495<-7567 Statuses=0009 0008 17:28:12 Msec=2250 True Az=117.165 Ze=66.495 Az status=0009 Ze status=0008 17:28:13 Check angles 17:28:13 SkyScan query 17:28:13 SkyScan query done: ret=0 az=134.535<-8969 ze=66.495<-7567 Statuses=0009 0008 17:28:13 Msec=3000 True Az=134.535 Ze=66.495 Az status=0009 Ze status=0008 17:28:13 Check angles 17:28:13 SkyScan query 17:28:14 SkyScan query done: ret=0 az=151.86<-10124 ze=66.495<-7567 Statuses=0009 0008 17:28:14 Msec=3750 True Az=151.86 Ze=66.495 Az status=0009 Ze status=0008 17:28:14 Check angles 17:28:14 SkyScan query 17:28:15 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 17:28:15 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 17:28:15 Message to Master queued w/err=0: serial=72039 error=0 17:28:20 Received message from Master: op=Filter serial=72040 17:28:20 Color wheel filter change from 0 to 0 17:28:20 FLIGetFilterPos err=0 currentPosition=0 17:28:20 FLIGetStepsRemaining err=0 RemainingSteps=0 17:28:20 Filter is already there-color wheel unchanged 17:28:20 Received message from Master: op=Shutter serial=72041 17:28:20 Shutter LASER close 17:28:20 Received message from Camera: op=State serial=72043 17:28:20 GetSingleValue result=40 Value=cccccccc 17:28:20 SkyScan query 17:28:20 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:28:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:28:20 Parameters OK 17:28:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:28:20 Set A/D data flow result=40 17:28:20 Set A/D channel type result=40 17:28:20 Set A/D encoding result=40 17:28:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:28:20 Set channel filter=0.000000e+000 result=40 17:28:20 Config A/D Result=40 17:28:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:28:20 Get A/D filter: -9.255963e+061 result=40 17:28:20 Get A/D value=-858993460 result=40 17:28:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:28:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:28:20 Parameters OK 17:28:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:28:20 Set A/D data flow result=40 17:28:20 Set A/D channel type result=40 17:28:20 Set A/D encoding result=40 17:28:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:28:20 Set channel filter=0.000000e+000 result=40 17:28:20 Config A/D Result=40 17:28:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:28:20 Get A/D filter: -9.255963e+061 result=40 17:28:20 Get A/D value=-858993460 result=40 17:28:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:28:20 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:28:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:28:20 Aux= 17:28:20 Message to Camera, serial 72043 queued 17:28:57 Received message from Master: op=PointingHead serial=72056 17:28:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:28:57 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:28:58 Point started: ret=0 17:28:58 point_skyscan result=0 17:28:58 Check angles 17:28:58 SkyScan query 17:28:59 SkyScan query done: ret=0 az=134.85<-8990 ze=36.645<-9557 Statuses=0009 0009 17:28:59 Msec=0 True Az=134.85 Ze=36.645 Az status=0009 Ze status=0009 17:28:59 Check angles 17:28:59 SkyScan query 17:29:00 SkyScan query done: ret=0 az=117.465<-7831 ze=15.72<-10952 Statuses=0009 0009 17:29:00 Msec=750 True Az=117.465 Ze=15.72 Az status=0009 Ze status=0009 17:29:00 Check angles 17:29:00 SkyScan query 17:29:01 SkyScan query done: ret=0 az=100.11<-6674 ze=-5.28<-12352 Statuses=0009 0009 17:29:01 Msec=1500 True Az=100.11 Ze=-5.28 Az status=0009 Ze status=0009 17:29:01 Check angles 17:29:01 SkyScan query 17:29:01 SkyScan query done: ret=0 az=82.575<-5505 ze=-26.19<-13746 Statuses=0009 0009 17:29:01 Msec=2250 True Az=82.575 Ze=-26.19 Az status=0009 Ze status=0009 17:29:01 Check angles 17:29:01 SkyScan query 17:29:02 SkyScan query done: ret=0 az=65.115<-4341 ze=-38.565<-14571 Statuses=0009 0008 17:29:02 Msec=3000 True Az=65.115 Ze=-38.565 Az status=0009 Ze status=0008 17:29:02 Check angles 17:29:02 SkyScan query 17:29:03 SkyScan query done: ret=0 az=47.61<-3174 ze=-38.535<-14569 Statuses=0009 0008 17:29:03 Msec=3750 True Az=47.61 Ze=-38.535 Az status=0009 Ze status=0008 17:29:03 Check angles 17:29:03 SkyScan query 17:29:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:29:04 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:29:04 Message to Master queued w/err=0: serial=72056 error=0 17:29:09 Received message from Master: op=Filter serial=72057 17:29:09 Color wheel filter change from 0 to 0 17:29:09 FLIGetFilterPos err=0 currentPosition=0 17:29:09 FLIGetStepsRemaining err=0 RemainingSteps=0 17:29:09 Filter is already there-color wheel unchanged 17:29:09 Received message from Master: op=Shutter serial=72058 17:29:09 Shutter LASER close 17:29:09 Received message from Camera: op=State serial=72060 17:29:09 GetSingleValue result=40 Value=cccccccc 17:29:09 SkyScan query 17:29:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:29:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:29:09 Parameters OK 17:29:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:29:09 Set A/D data flow result=40 17:29:09 Set A/D channel type result=40 17:29:09 Set A/D encoding result=40 17:29:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:29:09 Set channel filter=0.000000e+000 result=40 17:29:09 Config A/D Result=40 17:29:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:29:09 Get A/D filter: -9.255963e+061 result=40 17:29:09 Get A/D value=-858993460 result=40 17:29:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:29:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:29:09 Parameters OK 17:29:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:29:09 Set A/D data flow result=40 17:29:09 Set A/D channel type result=40 17:29:09 Set A/D encoding result=40 17:29:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:29:09 Set channel filter=0.000000e+000 result=40 17:29:09 Config A/D Result=40 17:29:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:29:09 Get A/D filter: -9.255963e+061 result=40 17:29:09 Get A/D value=-858993460 result=40 17:29:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:29:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:29:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:29:09 Aux= 17:29:09 Message to Camera, serial 72060 queued 17:29:46 Received message from Master: op=PointingHead serial=72073 17:29:46 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:29:46 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:29:46 Point started: ret=0 17:29:46 point_skyscan result=0 17:29:47 Check angles 17:29:47 SkyScan query 17:29:48 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.175<-16545 Statuses=0009 0009 17:29:48 Msec=0 True Az=63.96 Ze=-68.175 Az status=0009 Ze status=0009 17:29:48 Check angles 17:29:48 SkyScan query 17:29:49 SkyScan query done: ret=0 az=81.225<-5415 ze=-89.13<-17942 Statuses=0009 0009 17:29:49 Msec=750 True Az=81.225 Ze=-89.13 Az status=0009 Ze status=0009 17:29:49 Check angles 17:29:49 SkyScan query 17:29:49 SkyScan query done: ret=0 az=98.76<-6584 ze=-110.085<-19339 Statuses=0009 0009 17:29:49 Msec=1500 True Az=98.76 Ze=-110.085 Az status=0009 Ze status=0009 17:29:49 Check angles 17:29:49 SkyScan query 17:29:50 SkyScan query done: ret=0 az=116.46<-7764 ze=-131.025<-20735 Statuses=0009 0009 17:29:50 Msec=2250 True Az=116.46 Ze=-131.025 Az status=0009 Ze status=0009 17:29:50 Check angles 17:29:50 SkyScan query 17:29:51 SkyScan query done: ret=0 az=131.175<-8745 ze=-141.54<-21436 Statuses=0009 0008 17:29:51 Msec=3000 True Az=131.175 Ze=-141.54 Az status=0009 Ze status=0008 17:29:51 Check angles 17:29:51 SkyScan query 17:29:52 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 17:29:52 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 17:29:52 Message to Master queued w/err=0: serial=72073 error=0 17:29:57 Received message from Master: op=Filter serial=72074 17:29:57 Color wheel filter change from 0 to 0 17:29:57 FLIGetFilterPos err=0 currentPosition=0 17:29:57 FLIGetStepsRemaining err=0 RemainingSteps=0 17:29:57 Filter is already there-color wheel unchanged 17:29:57 Received message from Master: op=Shutter serial=72075 17:29:57 Shutter LASER close 17:29:57 Received message from Camera: op=State serial=72077 17:29:57 GetSingleValue result=40 Value=cccccccc 17:29:57 SkyScan query 17:29:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:29:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:29:57 Parameters OK 17:29:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:29:57 Set A/D data flow result=40 17:29:57 Set A/D channel type result=40 17:29:57 Set A/D encoding result=40 17:29:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:29:57 Set channel filter=0.000000e+000 result=40 17:29:57 Config A/D Result=40 17:29:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:29:57 Get A/D filter: -9.255963e+061 result=40 17:29:57 Get A/D value=-858993460 result=40 17:29:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:29:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:29:57 Parameters OK 17:29:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:29:57 Set A/D data flow result=40 17:29:57 Set A/D channel type result=40 17:29:57 Set A/D encoding result=40 17:29:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:29:57 Set channel filter=0.000000e+000 result=40 17:29:57 Config A/D Result=40 17:29:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:29:57 Get A/D filter: -9.255963e+061 result=40 17:29:57 Get A/D value=-858993460 result=40 17:29:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:29:57 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:29:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:29:57 Aux= 17:29:57 Message to Camera, serial 72077 queued 17:30:34 Received message from Master: op=PointingHead serial=72090 17:30:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:30:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:30:35 Point started: ret=0 17:30:35 point_skyscan result=0 17:30:35 Check angles 17:30:35 SkyScan query 17:30:36 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.315<-23421 Statuses=0009 0009 17:30:36 Msec=0 True Az=113.01 Ze=-171.315 Az status=0009 Ze status=0009 17:30:36 Check angles 17:30:36 SkyScan query 17:30:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 17:30:37 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 17:30:37 Message to Master queued w/err=0: serial=72090 error=0 17:30:42 Received message from Master: op=Filter serial=72091 17:30:42 Color wheel filter change from 0 to 0 17:30:42 FLIGetFilterPos err=0 currentPosition=0 17:30:42 FLIGetStepsRemaining err=0 RemainingSteps=0 17:30:42 Filter is already there-color wheel unchanged 17:30:42 Received message from Master: op=Shutter serial=72092 17:30:42 Shutter LASER open 17:30:42 Received message from Camera: op=State serial=72094 17:30:42 GetSingleValue result=40 Value=cccccccc 17:30:42 SkyScan query 17:30:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:30:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:30:43 Parameters OK 17:30:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:30:43 Set A/D data flow result=40 17:30:43 Set A/D channel type result=40 17:30:43 Set A/D encoding result=40 17:30:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:30:43 Set channel filter=0.000000e+000 result=40 17:30:43 Config A/D Result=40 17:30:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:30:43 Get A/D filter: -9.255963e+061 result=40 17:30:43 Get A/D value=-858993460 result=40 17:30:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:30:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:30:43 Parameters OK 17:30:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:30:43 Set A/D data flow result=40 17:30:43 Set A/D channel type result=40 17:30:43 Set A/D encoding result=40 17:30:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:30:43 Set channel filter=0.000000e+000 result=40 17:30:43 Config A/D Result=40 17:30:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:30:43 Get A/D filter: -9.255963e+061 result=40 17:30:43 Get A/D value=-858993460 result=40 17:30:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:30:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:30:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:30:43 Aux= 17:30:43 Message to Camera, serial 72094 queued 17:30:51 Received message from Master: op=Shutter serial=72104 17:30:51 Shutter LASER close 17:30:52 Received message from Master: op=PointingHead serial=72108 17:30:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:30:52 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:30:52 Point started: ret=0 17:30:52 point_skyscan result=0 17:30:53 Check angles 17:30:53 SkyScan query 17:30:53 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.755<-21517 Statuses=0009 0009 17:30:53 Msec=0 True Az=136.38 Ze=-142.755 Az status=0009 Ze status=0009 17:30:53 Check angles 17:30:53 SkyScan query 17:30:54 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.77<-20118 Statuses=0009 0009 17:30:54 Msec=750 True Az=153.81 Ze=-121.77 Az status=0009 Ze status=0009 17:30:54 Check angles 17:30:54 SkyScan query 17:30:55 SkyScan query done: ret=0 az=171.27<-11418 ze=-100.83<-18722 Statuses=0009 0009 17:30:55 Msec=1500 True Az=171.27 Ze=-100.83 Az status=0009 Ze status=0009 17:30:55 Check angles 17:30:55 SkyScan query 17:30:56 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.92<-17328 Statuses=0008 0009 17:30:56 Msec=2250 True Az=176.025 Ze=-79.92 Az status=0008 Ze status=0009 17:30:56 Check angles 17:30:56 SkyScan query 17:30:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.935<-15929 Statuses=0008 0009 17:30:56 Msec=3000 True Az=176.01 Ze=-58.935 Az status=0008 Ze status=0009 17:30:56 Check angles 17:30:56 SkyScan query 17:30:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 17:30:57 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 17:30:57 Message to Master queued w/err=0: serial=72108 error=0 17:31:02 Received message from Master: op=Filter serial=72109 17:31:02 Color wheel filter change from 0 to 0 17:31:02 FLIGetFilterPos err=0 currentPosition=0 17:31:02 FLIGetStepsRemaining err=0 RemainingSteps=0 17:31:02 Filter is already there-color wheel unchanged 17:31:02 Received message from Master: op=Shutter serial=72110 17:31:02 Shutter LASER close 17:31:02 Received message from Camera: op=State serial=72112 17:31:02 GetSingleValue result=40 Value=cccccccc 17:31:02 SkyScan query 17:31:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:31:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:31:03 Parameters OK 17:31:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:31:03 Set A/D data flow result=40 17:31:03 Set A/D channel type result=40 17:31:03 Set A/D encoding result=40 17:31:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:31:03 Set channel filter=0.000000e+000 result=40 17:31:03 Config A/D Result=40 17:31:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:31:03 Get A/D filter: -9.255963e+061 result=40 17:31:03 Get A/D value=-858993460 result=40 17:31:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:31:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:31:03 Parameters OK 17:31:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:31:03 Set A/D data flow result=40 17:31:03 Set A/D channel type result=40 17:31:03 Set A/D encoding result=40 17:31:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:31:03 Set channel filter=0.000000e+000 result=40 17:31:03 Config A/D Result=40 17:31:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:31:03 Get A/D filter: -9.255963e+061 result=40 17:31:03 Get A/D value=-858993460 result=40 17:31:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:31:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:31:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:31:03 Aux= 17:31:03 Message to Camera, serial 72112 queued 17:31:40 Received message from Master: op=PointingHead serial=72125 17:31:40 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:31:40 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:31:40 Point started: ret=0 17:31:40 point_skyscan result=0 17:31:41 Check angles 17:31:41 SkyScan query 17:31:41 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.51<-13434 Statuses=0009 0009 17:31:41 Msec=0 True Az=152.775 Ze=-21.51 Az status=0009 Ze status=0009 17:31:42 Check angles 17:31:42 SkyScan query 17:31:42 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.51<-12034 Statuses=0009 0009 17:31:42 Msec=750 True Az=135.45 Ze=-0.51 Az status=0009 Ze status=0009 17:31:42 Check angles 17:31:42 SkyScan query 17:31:43 SkyScan query done: ret=0 az=117.375<-7825 ze=20.85<-10610 Statuses=0009 0009 17:31:43 Msec=1500 True Az=117.375 Ze=20.85 Az status=0009 Ze status=0009 17:31:43 Check angles 17:31:43 SkyScan query 17:31:44 SkyScan query done: ret=0 az=99.78<-6652 ze=42.24<-9184 Statuses=0009 0009 17:31:44 Msec=2250 True Az=99.78 Ze=42.24 Az status=0009 Ze status=0009 17:31:44 Check angles 17:31:44 SkyScan query 17:31:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 17:31:45 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 17:31:45 Check angles 17:31:45 SkyScan query 17:31:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:31:45 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:31:45 Message to Master queued w/err=0: serial=72125 error=0 17:31:50 Received message from Master: op=Filter serial=72126 17:31:50 Color wheel filter change from 0 to 0 17:31:50 FLIGetFilterPos err=0 currentPosition=0 17:31:50 FLIGetStepsRemaining err=0 RemainingSteps=0 17:31:50 Filter is already there-color wheel unchanged 17:31:50 Received message from Master: op=Shutter serial=72127 17:31:50 Shutter LASER close 17:31:50 Received message from Camera: op=State serial=72129 17:31:50 GetSingleValue result=40 Value=cccccccc 17:31:50 SkyScan query 17:31:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:31:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:31:51 Parameters OK 17:31:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:31:51 Set A/D data flow result=40 17:31:51 Set A/D channel type result=40 17:31:51 Set A/D encoding result=40 17:31:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:31:51 Set channel filter=0.000000e+000 result=40 17:31:51 Config A/D Result=40 17:31:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:31:51 Get A/D filter: -9.255963e+061 result=40 17:31:51 Get A/D value=-858993460 result=40 17:31:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:31:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:31:51 Parameters OK 17:31:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:31:51 Set A/D data flow result=40 17:31:51 Set A/D channel type result=40 17:31:51 Set A/D encoding result=40 17:31:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:31:51 Set channel filter=0.000000e+000 result=40 17:31:51 Config A/D Result=40 17:31:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:31:51 Get A/D filter: -9.255963e+061 result=40 17:31:51 Get A/D value=-858993460 result=40 17:31:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:31:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:31:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:31:51 Aux= 17:31:51 Message to Camera, serial 72129 queued 17:32:28 Received message from Master: op=PointingHead serial=72142 17:32:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:32:28 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:32:28 Point started: ret=0 17:32:28 point_skyscan result=0 17:32:29 Check angles 17:32:29 SkyScan query 17:32:30 SkyScan query done: ret=0 az=108.9<-7260 ze=38.49<-9434 Statuses=0009 0008 17:32:30 Msec=0 True Az=108.9 Ze=38.49 Az status=0009 Ze status=0008 17:32:30 Check angles 17:32:30 SkyScan query 17:32:30 SkyScan query done: ret=0 az=126.75<-8450 ze=38.505<-9433 Statuses=0009 0008 17:32:30 Msec=750 True Az=126.75 Ze=38.505 Az status=0009 Ze status=0008 17:32:31 Check angles 17:32:31 SkyScan query 17:32:31 SkyScan query done: ret=0 az=144.225<-9615 ze=38.505<-9433 Statuses=0009 0008 17:32:31 Msec=1500 True Az=144.225 Ze=38.505 Az status=0009 Ze status=0008 17:32:31 Check angles 17:32:31 SkyScan query 17:32:32 SkyScan query done: ret=0 az=161.625<-10775 ze=38.505<-9433 Statuses=0009 0008 17:32:32 Msec=2250 True Az=161.625 Ze=38.505 Az status=0009 Ze status=0008 17:32:32 Check angles 17:32:32 SkyScan query 17:32:33 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:32:33 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:32:33 Check angles 17:32:33 SkyScan query 17:32:33 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 17:32:33 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 17:32:33 Message to Master queued w/err=0: serial=72142 error=0 17:32:38 Received message from Master: op=Filter serial=72143 17:32:38 Color wheel filter change from 0 to 0 17:32:38 FLIGetFilterPos err=0 currentPosition=0 17:32:38 FLIGetStepsRemaining err=0 RemainingSteps=0 17:32:38 Filter is already there-color wheel unchanged 17:32:39 Received message from Master: op=Shutter serial=72144 17:32:39 Shutter LASER close 17:32:39 Received message from Camera: op=State serial=72146 17:32:39 GetSingleValue result=40 Value=cccccccc 17:32:39 SkyScan query 17:32:39 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:32:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:32:39 Parameters OK 17:32:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:32:39 Set A/D data flow result=40 17:32:39 Set A/D channel type result=40 17:32:39 Set A/D encoding result=40 17:32:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:32:39 Set channel filter=0.000000e+000 result=40 17:32:39 Config A/D Result=40 17:32:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:32:39 Get A/D filter: -9.255963e+061 result=40 17:32:39 Get A/D value=-858993460 result=40 17:32:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:32:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:32:39 Parameters OK 17:32:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:32:39 Set A/D data flow result=40 17:32:39 Set A/D channel type result=40 17:32:39 Set A/D encoding result=40 17:32:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:32:39 Set channel filter=0.000000e+000 result=40 17:32:39 Config A/D Result=40 17:32:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:32:39 Get A/D filter: -9.255963e+061 result=40 17:32:39 Get A/D value=-858993460 result=40 17:32:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:32:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:32:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:32:39 Aux= 17:32:39 Message to Camera, serial 72146 queued 17:33:16 Received message from Master: op=PointingHead serial=72159 17:33:16 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:33:16 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:33:16 Point started: ret=0 17:33:16 point_skyscan result=0 17:33:17 Check angles 17:33:17 SkyScan query 17:33:18 SkyScan query done: ret=0 az=152.685<-10179 ze=8.28<-11448 Statuses=0009 0009 17:33:18 Msec=0 True Az=152.685 Ze=8.28 Az status=0009 Ze status=0009 17:33:18 Check angles 17:33:18 SkyScan query 17:33:18 SkyScan query done: ret=0 az=135.24<-9016 ze=-12.645<-12843 Statuses=0009 0009 17:33:18 Msec=750 True Az=135.24 Ze=-12.645 Az status=0009 Ze status=0009 17:33:19 Check angles 17:33:19 SkyScan query 17:33:19 SkyScan query done: ret=0 az=117.555<-7837 ze=-33.585<-14239 Statuses=0009 0009 17:33:19 Msec=1500 True Az=117.555 Ze=-33.585 Az status=0009 Ze status=0009 17:33:19 Check angles 17:33:19 SkyScan query 17:33:20 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.555<-15437 Statuses=0009 0009 17:33:20 Msec=2250 True Az=100.23 Ze=-51.555 Az status=0009 Ze status=0009 17:33:20 Check angles 17:33:20 SkyScan query 17:33:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 17:33:21 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 17:33:21 Check angles 17:33:21 SkyScan query 17:33:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:33:21 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:33:21 Message to Master queued w/err=0: serial=72159 error=0 17:33:26 Received message from Master: op=Filter serial=72160 17:33:26 Color wheel filter change from 0 to 0 17:33:26 FLIGetFilterPos err=0 currentPosition=0 17:33:26 FLIGetStepsRemaining err=0 RemainingSteps=0 17:33:26 Filter is already there-color wheel unchanged 17:33:27 Received message from Master: op=Shutter serial=72161 17:33:27 Shutter LASER close 17:33:27 Received message from Camera: op=State serial=72163 17:33:27 GetSingleValue result=40 Value=cccccccc 17:33:27 SkyScan query 17:33:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:33:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:33:27 Parameters OK 17:33:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:33:27 Set A/D data flow result=40 17:33:27 Set A/D channel type result=40 17:33:27 Set A/D encoding result=40 17:33:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:33:27 Set channel filter=0.000000e+000 result=40 17:33:27 Config A/D Result=40 17:33:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:33:27 Get A/D filter: -9.255963e+061 result=40 17:33:27 Get A/D value=-858993460 result=40 17:33:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:33:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:33:27 Parameters OK 17:33:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:33:27 Set A/D data flow result=40 17:33:27 Set A/D channel type result=40 17:33:27 Set A/D encoding result=40 17:33:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:33:27 Set channel filter=0.000000e+000 result=40 17:33:27 Config A/D Result=40 17:33:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:33:27 Get A/D filter: -9.255963e+061 result=40 17:33:27 Get A/D value=-858993460 result=40 17:33:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:33:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:33:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:33:27 Aux= 17:33:27 Message to Camera, serial 72163 queued 17:34:05 Received message from Master: op=PointingHead serial=72176 17:34:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:34:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:34:05 Point started: ret=0 17:34:05 point_skyscan result=0 17:34:06 Check angles 17:34:06 SkyScan query 17:34:07 SkyScan query done: ret=0 az=108.885<-7259 ze=-81.18<-17412 Statuses=0009 0009 17:34:07 Msec=0 True Az=108.885 Ze=-81.18 Az status=0009 Ze status=0009 17:34:07 Check angles 17:34:07 SkyScan query 17:34:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.135<-18809 Statuses=0008 0009 17:34:07 Msec=750 True Az=112.995 Ze=-102.135 Az status=0008 Ze status=0009 17:34:08 Check angles 17:34:08 SkyScan query 17:34:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.075<-20205 Statuses=0008 0009 17:34:08 Msec=1500 True Az=112.995 Ze=-123.075 Az status=0008 Ze status=0009 17:34:08 Check angles 17:34:08 SkyScan query 17:34:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.045<-21603 Statuses=0008 0009 17:34:09 Msec=2250 True Az=112.995 Ze=-144.045 Az status=0008 Ze status=0009 17:34:09 Check angles 17:34:09 SkyScan query 17:34:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-165<-23000 Statuses=0008 0009 17:34:10 Msec=3000 True Az=112.995 Ze=-165 Az status=0008 Ze status=0009 17:34:10 Check angles 17:34:10 SkyScan query 17:34:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:34:10 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:34:10 Message to Master queued w/err=0: serial=72176 error=0 17:34:15 Received message from Master: op=Filter serial=72177 17:34:15 Color wheel filter change from 0 to 2 17:34:15 FLIGetFilterPos err=0 currentPosition=0 17:34:15 FLIGetStepsRemaining err=0 RemainingSteps=0 17:34:19 FLISetFilterPos err=0 rqPosition=2 17:34:19 FLIGetStepsRemaining err=0 RemainingSteps=0 17:34:19 Check after 0.00 sec for filter wheel DIn/CWh=0 17:34:19 FLIGetFilterPos err=0 currentPosition=2 17:34:19 FLIGetStepsRemaining err=0 RemainingSteps=0 17:34:19 Received message from Master: op=Shutter serial=72178 17:34:19 Shutter LASER close 17:34:19 Received message from Camera: op=State serial=72180 17:34:19 GetSingleValue result=40 Value=cccccccc 17:34:19 SkyScan query 17:34:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:34:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:34:20 Parameters OK 17:34:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:34:20 Set A/D data flow result=40 17:34:20 Set A/D channel type result=40 17:34:20 Set A/D encoding result=40 17:34:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:34:20 Set channel filter=0.000000e+000 result=40 17:34:20 Config A/D Result=40 17:34:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:34:20 Get A/D filter: -9.255963e+061 result=40 17:34:20 Get A/D value=-858993460 result=40 17:34:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:34:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:34:20 Parameters OK 17:34:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:34:20 Set A/D data flow result=40 17:34:20 Set A/D channel type result=40 17:34:20 Set A/D encoding result=40 17:34:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:34:20 Set channel filter=0.000000e+000 result=40 17:34:20 Config A/D Result=40 17:34:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:34:20 Get A/D filter: -9.255963e+061 result=40 17:34:20 Get A/D value=-858993460 result=40 17:34:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:34:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:34:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:34:20 Aux= 17:34:20 Message to Camera, serial 72180 queued 17:34:25 Received message from Master: op=PointingHead serial=72191 17:34:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:34:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:34:26 Point started: ret=0 17:34:26 point_skyscan result=0 17:34:26 Check angles 17:34:26 SkyScan query 17:34:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:34:27 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 17:34:27 Message to Master queued w/err=0: serial=72191 error=0 17:34:32 Received message from Master: op=Filter serial=72192 17:34:32 Color wheel filter change from 2 to 2 17:34:32 FLIGetFilterPos err=0 currentPosition=2 17:34:32 FLIGetStepsRemaining err=0 RemainingSteps=0 17:34:32 Filter is already there-color wheel unchanged 17:34:32 Received message from Master: op=Shutter serial=72193 17:34:32 Shutter LASER close 17:34:32 Received message from Camera: op=State serial=72195 17:34:32 GetSingleValue result=40 Value=cccccccc 17:34:32 SkyScan query 17:34:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:34:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:34:33 Parameters OK 17:34:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:34:33 Set A/D data flow result=40 17:34:33 Set A/D channel type result=40 17:34:33 Set A/D encoding result=40 17:34:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:34:33 Set channel filter=0.000000e+000 result=40 17:34:33 Config A/D Result=40 17:34:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:34:33 Get A/D filter: -9.255963e+061 result=40 17:34:33 Get A/D value=-858993460 result=40 17:34:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:34:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:34:33 Parameters OK 17:34:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:34:33 Set A/D data flow result=40 17:34:33 Set A/D channel type result=40 17:34:33 Set A/D encoding result=40 17:34:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:34:33 Set channel filter=0.000000e+000 result=40 17:34:33 Config A/D Result=40 17:34:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:34:33 Get A/D filter: -9.255963e+061 result=40 17:34:33 Get A/D value=-858993460 result=40 17:34:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:34:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:34:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:34:33 Aux= 17:34:33 Message to Camera, serial 72195 queued 17:35:09 Received message from Master: op=PointingHead serial=72207 17:35:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:35:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:35:09 Point started: ret=0 17:35:09 point_skyscan result=0 17:35:10 Check angles 17:35:10 SkyScan query 17:35:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:35:10 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 17:35:10 Message to Master queued w/err=0: serial=72207 error=0 17:35:15 Received message from Master: op=Filter serial=72208 17:35:15 Color wheel filter change from 2 to 2 17:35:15 FLIGetFilterPos err=0 currentPosition=2 17:35:15 FLIGetStepsRemaining err=0 RemainingSteps=0 17:35:15 Filter is already there-color wheel unchanged 17:35:16 Received message from Master: op=Shutter serial=72209 17:35:16 Shutter LASER close 17:35:16 Received message from Camera: op=State serial=72211 17:35:16 GetSingleValue result=40 Value=cccccccc 17:35:16 SkyScan query 17:35:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:35:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:35:16 Parameters OK 17:35:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:35:16 Set A/D data flow result=40 17:35:16 Set A/D channel type result=40 17:35:16 Set A/D encoding result=40 17:35:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:35:16 Set channel filter=0.000000e+000 result=40 17:35:16 Config A/D Result=40 17:35:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:35:16 Get A/D filter: -9.255963e+061 result=40 17:35:16 Get A/D value=-858993460 result=40 17:35:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:35:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:35:16 Parameters OK 17:35:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:35:16 Set A/D data flow result=40 17:35:16 Set A/D channel type result=40 17:35:16 Set A/D encoding result=40 17:35:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:35:16 Set channel filter=0.000000e+000 result=40 17:35:16 Config A/D Result=40 17:35:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:35:16 Get A/D filter: -9.255963e+061 result=40 17:35:16 Get A/D value=-858993460 result=40 17:35:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:35:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:35:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:35:16 Aux= 17:35:16 Message to Camera, serial 72211 queued 17:35:24 Received message from Master: op=Log close serial=72225 17:35:24 Log file close 17:35:24 * END OF LOG *